fix: make the AMS device UI work on non-Bambu printer agents

Resolve the filament list's printer model from the agent-reported model id or the selected printer profile, so the AMS Materials Setting dropdown and its Confirm button work on OrcaSonar. Third-party trays pre-fill and allow editing their temps, and the popup's initial selection no longer overwrites them.

Render explicitly-empty trays as "Empty" instead of "?" using a wire-derived DevAmsTray::is_empty, while keeping the slot editable.

Hide the flow-dynamics K/N controls for non-Bambu agents — tile, dialog, validation and sends — with Bambu behavior unchanged.

Tests cover model resolution, the K/N gate and empty-tray classification.

CMakeLists.txt

@@ -826,6 +826,37 @@ find_package(OpenSSL REQUIRED)
 find_package(CURL REQUIRED)
 find_package(Freetype REQUIRED)
 
+if (SLIC3R_GUI)
+    # LibDataChannel's installed export references its bundled dependencies,
+    # but does not install their CMake targets. Recreate those targets from
+    # the same dependency prefix before loading the LibDataChannel config.
+    if (NOT TARGET Usrsctp::usrsctp)
+        find_library(_ORCA_USRSCTP_LIBRARY NAMES usrsctp
+            PATHS "${CMAKE_PREFIX_PATH}/lib" NO_DEFAULT_PATH)
+        if (_ORCA_USRSCTP_LIBRARY)
+            add_library(Usrsctp::usrsctp UNKNOWN IMPORTED GLOBAL)
+            set_target_properties(Usrsctp::usrsctp PROPERTIES
+                IMPORTED_LOCATION "${_ORCA_USRSCTP_LIBRARY}"
+                IMPORTED_LINK_INTERFACE_LANGUAGES C
+                INTERFACE_LINK_LIBRARIES "Threads::Threads")
+        endif()
+    endif()
+
+    if (NOT TARGET LibJuice::LibJuice)
+        find_library(_ORCA_LIBJUICE_LIBRARY NAMES juice
+            PATHS "${CMAKE_PREFIX_PATH}/lib" NO_DEFAULT_PATH)
+        if (_ORCA_LIBJUICE_LIBRARY)
+            add_library(LibJuice::LibJuice UNKNOWN IMPORTED GLOBAL)
+            set_target_properties(LibJuice::LibJuice PROPERTIES
+                IMPORTED_LOCATION "${_ORCA_LIBJUICE_LIBRARY}"
+                IMPORTED_LINK_INTERFACE_LANGUAGES C
+                INTERFACE_LINK_LIBRARIES "Threads::Threads")
+        endif()
+    endif()
+
+    find_package(LibDataChannel CONFIG REQUIRED)
+endif()
+
 
 add_library(libcurl INTERFACE)
 target_link_libraries(libcurl INTERFACE CURL::libcurl)
@@ -1106,6 +1137,7 @@ function(orcaslicer_copy_dlls target config postfix output_dlls)
     endif ()
     file(COPY ${_occt_dlls}
             ${CMAKE_PREFIX_PATH}/bin/freetype.dll
+            ${CMAKE_PREFIX_PATH}/bin/avformat-61.dll
             ${CMAKE_PREFIX_PATH}/bin/avcodec-61.dll
             ${CMAKE_PREFIX_PATH}/bin/swresample-5.dll
             ${CMAKE_PREFIX_PATH}/bin/swscale-8.dll
@@ -1118,6 +1150,7 @@ function(orcaslicer_copy_dlls target config postfix output_dlls)
         ${_out_dir}/WebView2Loader.dll
 
         ${_out_dir}/freetype.dll
+        ${_out_dir}/avformat-61.dll
         ${_out_dir}/avcodec-61.dll
         ${_out_dir}/swresample-5.dll
         ${_out_dir}/swscale-8.dll
@@ -1141,7 +1174,10 @@ function(orcaslicer_copy_sos target config postfix output_sos)
         set(_out_dir "${CMAKE_CURRENT_BINARY_DIR}")
     endif ()
 
-    file(COPY ${CMAKE_PREFIX_PATH}/lib/libavcodec.so
+    file(COPY ${CMAKE_PREFIX_PATH}/lib/libavformat.so
+            ${CMAKE_PREFIX_PATH}/lib/libavformat.so.61
+            ${CMAKE_PREFIX_PATH}/lib/libavformat.so.61.1.100
+            ${CMAKE_PREFIX_PATH}/lib/libavcodec.so
             ${CMAKE_PREFIX_PATH}/lib/libavcodec.so.61
             ${CMAKE_PREFIX_PATH}/lib/libavcodec.so.61.3.100
             ${CMAKE_PREFIX_PATH}/lib/libavutil.so
@@ -1156,6 +1192,9 @@ function(orcaslicer_copy_sos target config postfix output_sos)
          DESTINATION ${_out_dir})
 
     set(${output_sos}
+        ${_out_dir}/libavformat.so
+        ${_out_dir}/libavformat.so.61
+        ${_out_dir}/libavformat.so.61.1.100
         ${_out_dir}/libavcodec.so
         ${_out_dir}/libavcodec.so.61
         ${_out_dir}/libavcodec.so.61.3.100
@@ -1285,6 +1324,8 @@ endif ()
 
 if (CMAKE_SYSTEM_NAME STREQUAL "Linux")
     set(LIBRARY_FILES
+    ${LIBDIR_BIN}/libavformat.so.61
+    ${LIBDIR_BIN}/libavformat.so.61.1.100
     ${LIBDIR_BIN}/libavcodec.so.61
     ${LIBDIR_BIN}/libavcodec.so.61.3.100
     ${LIBDIR_BIN}/libavutil.so.59

deps/CMakeLists.txt

@@ -156,7 +156,7 @@ if (NOT _is_multi AND NOT CMAKE_BUILD_TYPE)
 endif ()
 
 function(orcaslicer_add_cmake_project projectname)
-    cmake_parse_arguments(P_ARGS "FORWARD_CONFIG" "INSTALL_DIR;BUILD_COMMAND;INSTALL_COMMAND" "CMAKE_ARGS" ${ARGN})
+    cmake_parse_arguments(P_ARGS "FORWARD_CONFIG" "INSTALL_DIR;BUILD_COMMAND;INSTALL_COMMAND;SOURCE_DIR" "CMAKE_ARGS" ${ARGN})
 
     # MSVC is true for clang-cl as well, so the sub-build toolchain has to key on the
     # generator. A non-Visual-Studio superbuild passes its own generator down, and with
@@ -202,12 +202,18 @@ function(orcaslicer_add_cmake_project projectname)
       set(_build_j "-j${NPROC}")
     endif ()
 
+    set(_source_dir_arg "")
+    if (P_ARGS_SOURCE_DIR)
+        set(_source_dir_arg SOURCE_DIR ${P_ARGS_SOURCE_DIR})
+    endif ()
+
 if (NOT IS_CROSS_COMPILE OR NOT APPLE)
     ExternalProject_Add(
         dep_${projectname}
         EXCLUDE_FROM_ALL    ON
         INSTALL_DIR         ${DESTDIR}
         DOWNLOAD_DIR        ${DEP_DOWNLOAD_DIR}/${projectname}
+        ${_source_dir_arg}
         ${_gen}
         CMAKE_ARGS
             -DCMAKE_POLICY_VERSION_MINIMUM=3.5
@@ -240,12 +246,14 @@ if (NOT IS_CROSS_COMPILE OR NOT APPLE)
         # note for future devs: shared libs may actually create a size reduction
         # but orcaslicer_deps tends to get really funny regarding linking after that (notably boost)
         # so, as much as I would like to use that, it's not happening
-        ExternalProject_Add_Step(dep_${projectname} free_download_space
-                DEPENDEES download # do after download
-                COMMENT "Freeing Space: Removing source archive"
-                WORKING_DIRECTORY ${DEP_DOWNLOAD_DIR}
-                COMMAND ${CMAKE_COMMAND} -E rm -r ${projectname}
-        )
+        if (NOT P_ARGS_SOURCE_DIR)
+            ExternalProject_Add_Step(dep_${projectname} free_download_space
+                    DEPENDEES download # do after download
+                    COMMENT "Freeing Space: Removing source archive"
+                    WORKING_DIRECTORY ${DEP_DOWNLOAD_DIR}
+                    COMMAND ${CMAKE_COMMAND} -E rm -rf ${projectname}
+            )
+        endif ()
         ExternalProject_Add_Step(dep_${projectname} free_build_space
                 DEPENDEES install # do after install
                 COMMENT "Freeing Space: Removing source and build files"
@@ -259,6 +267,7 @@ else()
         EXCLUDE_FROM_ALL    ON
         INSTALL_DIR         ${DESTDIR}
         DOWNLOAD_DIR        ${DEP_DOWNLOAD_DIR}/${projectname}
+        ${_source_dir_arg}
         ${_gen}
         CMAKE_ARGS
             -DCMAKE_POLICY_VERSION_MINIMUM=3.5
@@ -386,10 +395,6 @@ include(libnoise/libnoise.cmake)
 
 include(Draco/Draco.cmake)
 
-include(FFMPEG/FFMPEG.cmake)
-include(Assimp/Assimp.cmake)
-
-
 # I *think* 1.1 is used for *just* md5 hashing?
 # 3.1 has everything in the right place, but the md5 funcs used are deprecated
 # a grep across the repo shows it is used for other things
@@ -400,6 +405,12 @@ if(NOT OPENSSL_FOUND)
     set(OPENSSL_PKG dep_OpenSSL)
 endif()
 
+include(FFMPEG/FFMPEG.cmake)
+include(Assimp/Assimp.cmake)
+
+include(DataChannel/DataChannel.cmake)
+set(DATACHANNEL_PKG dep_DataChannel)
+
 # we don't want to load a "wrong" openssl when loading curl
 # so, just don't even bother
 # ...i think this is how it works? change if wrong
@@ -473,6 +484,7 @@ set(_dep_list
     dep_wxInspector
     dep_FFMPEG
     dep_Assimp
+    ${DATACHANNEL_PKG}
     )
 
 if (MSVC)

deps/DataChannel/DataChannel.cmake

@@ -0,0 +1,37 @@
+# libdatachannel is the native ICE/DTLS/SCTP implementation used by the
+# GUI WebRTC camera controller. Keep the source revision fixed: the signaling
+# protocol is evolving independently of this transport dependency.
+#
+# It vendors plog, usrsctp and libjuice as git submodules, which a plain
+# GitHub tag tarball does not include. The flatpak sandbox has no network
+# access during the build, so there the manifest itself clones the repo
+# (submodules and all) into the dependency download directory before the
+# sandbox closes. ExternalProject_Add is pointed at that existing checkout
+# instead of being given its own network-dependent download method.
+if (FLATPAK)
+    set(_datachannel_source
+        SOURCE_DIR ${DEP_DOWNLOAD_DIR}/DataChannel
+    )
+else()
+    set(_datachannel_source
+        GIT_REPOSITORY https://github.com/paullouisageneau/libdatachannel.git
+        GIT_TAG v0.24.5
+        GIT_SHALLOW ON
+        GIT_SUBMODULES_RECURSE ON
+    )
+endif()
+
+orcaslicer_add_cmake_project(DataChannel
+    DEPENDS ${OPENSSL_PKG}
+    CMAKE_ARGS
+        -DNO_EXAMPLES=ON
+        -DNO_TESTS=ON
+        -DNO_WEBSOCKET=ON
+        -DNO_MEDIA=ON
+        -DUSE_NICE=OFF
+        -DUSE_SYSTEM_JUICE=OFF
+        -DUSE_SYSTEM_USRSCTP=OFF
+        -DOPENSSL_ROOT_DIR:PATH=${DESTDIR}
+        -DOPENSSL_USE_STATIC_LIBS=ON
+    ${_datachannel_source}
+)

deps/FFMPEG/FFMPEG.cmake

@@ -1,14 +1,26 @@
 set(_conf_cmd ./configure)
 
+set(_ffmpeg_depends)
+set(_ffmpeg_configure_command ${_conf_cmd})
+if (TARGET dep_OpenSSL)
+    set(_ffmpeg_depends DEPENDS dep_OpenSSL)
+    set(_ffmpeg_configure_command
+        ${CMAKE_COMMAND} -E env
+        "PKG_CONFIG_PATH=${DESTDIR}/lib/pkgconfig:$ENV{PKG_CONFIG_PATH}"
+        ${_conf_cmd}
+    )
+endif()
+
 if (MSVC)
     set(_source_dir "${CMAKE_BINARY_DIR}/dep_FFMPEG-prefix/src/dep_FFMPEG")
 
-    set(PREBUILD_URL_arm64 "https://github.com/Noisyfox/FFmpeg-Builds-Orca/releases/download/autobuild-2026-07-17-14-28/ffmpeg-n7.0.3-31-g9b6ffd74b5-winarm64-orca-shared-7.0.zip")
-    set(PREBUILD_HASH_arm64 "12f4140279f2f8469885e1b5b2e8be9d788882914c21523cacd56989f3548054")
-    set(PREBUILD_URL_x64 "https://github.com/Noisyfox/FFmpeg-Builds-Orca/releases/download/autobuild-2026-07-17-14-28/ffmpeg-n7.0.3-31-g9b6ffd74b5-win64-orca-shared-7.0.zip")
-    set(PREBUILD_HASH_x64 "e65916020ddb9ef84b2666dfbcbfc9b1d67f69d15b4a66db53754637bf2d498c")
+    set(PREBUILD_URL_arm64 "https://github.com/Noisyfox/FFmpeg-Builds-Orca/releases/download/autobuild-2026-09-18-16-50/ffmpeg-n7.0.3-33-g887d4b4919-winarm64-orca-shared-7.0.zip")
+    set(PREBUILD_HASH_arm64 "da480cbb39680056de824c57ec4dc3bd577b479ebbc310ff1f9dc55cf014b4c1")
+    set(PREBUILD_URL_x64 "https://github.com/Noisyfox/FFmpeg-Builds-Orca/releases/download/autobuild-2026-09-18-16-50/ffmpeg-n7.0.3-33-g887d4b4919-win64-orca-shared-7.0.zip")
+    set(PREBUILD_HASH_x64 "85da19daf198f5548259d8aabb349db84997a3f6e6886d8d7764114add9c6dae")
 
     ExternalProject_Add(dep_FFMPEG
+        ${_ffmpeg_depends}
         URL ${PREBUILD_URL_${DEPS_ARCH}}
         URL_HASH SHA256=${PREBUILD_HASH_${DEPS_ARCH}}
         DOWNLOAD_DIR ${DEP_DOWNLOAD_DIR}/FFMPEG
@@ -21,6 +33,8 @@ if (MSVC)
     )
 
 else ()
+    set(_openssl_cmd --enable-openssl)
+
     if (APPLE)
         set(_minos_cmd
             "--extra-cflags=-mmacosx-version-min=${DEP_OSX_TARGET}"
@@ -52,10 +66,11 @@ else ()
     endif()
 
     ExternalProject_Add(dep_FFMPEG
+        ${_ffmpeg_depends}
         URL https://github.com/FFmpeg/FFmpeg/archive/refs/tags/n7.0.3.tar.gz
         URL_HASH SHA256=DEEDCABE339165214A3637DF4C86A507AEF0D793CF8774FF68735F4737E8DDBC
         DOWNLOAD_DIR ${DEP_DOWNLOAD_DIR}/FFMPEG
-        CONFIGURE_COMMAND ${_conf_cmd}
+        CONFIGURE_COMMAND ${_ffmpeg_configure_command}
             ${_cross_cmd}
             ${_pic_cmd}
             ${_arch_cmd}
@@ -63,20 +78,21 @@ else ()
             "--prefix=${DESTDIR}"
             ${_link_cmd}
             ${_minos_cmd}
+            ${_openssl_cmd}
             --disable-doc
             --enable-small
             --disable-outdevs
             --disable-filters
             --enable-filter=*null*,afade,*fifo,*format,*resample,aeval,allrgb,allyuv,atempo,pan,*bars,color,*key,crop,draw*,eq*,framerate,*_qsv,*_vaapi,*v4l2*,hw*,scale,volume,test*
             --disable-protocols
-            --enable-protocol=file,fd,pipe,rtp,udp
+            --enable-protocol=file,fd,pipe,http,https,rtp,tcp,udp
             --disable-muxers
             --enable-muxer=rtp
             --disable-encoders
             --disable-decoders
             --enable-decoder=*aac*,h264*,mp3*,mjpeg,rv*
             --disable-demuxers
-            --enable-demuxer=h264,mp3,mov
+            --enable-demuxer=h264,mp3,mov,mpjpeg,rtsp,sdp
             --disable-zlib
             --disable-avdevice
         BUILD_IN_SOURCE ON

docs/HLSD/deferred-page-construction.md

@@ -1,220 +0,0 @@
-# Deferred Page Construction: High Level Design
-
-## Why it exists
-
-The main window is a notebook of tabs. When the first frame appears, one tab is on
-screen and the others are not; some of them are opened later in the session, some
-never, and some only exist for certain printers. Building a tab before the first frame
-adds its cost to every startup, whether or not the tab is used.
-
-This subsystem builds a tab's panel the first time the tab is shown. It also builds the
-remaining tabs while the user is idle after startup, in units of tens of milliseconds,
-so a click that lands in the middle of one waits for that unit and no longer. Startup
-pays only for what the first frame shows, and the other tabs are usually built before
-anyone opens them.
-
-## The parts
-
-`src/slic3r/GUI/Lazy.hpp`, `LazyPage.hpp`, `StagedBuild.hpp` and `IdleScheduler.hpp/.cpp`
-(with its wx-free `PrebuildQueue.hpp`) are independent. A holder can hold anything a
-factory makes, a page is a holder with a placeholder widget, a staged object can live
-outside a holder, and the scheduler knows none of them; it runs tasks, which `MainFrame`
-makes from the holders.
-
-### Lazy<T>: the holder
-
-Holds an object that a factory makes on first use, under a name for the log and a place
-in the idle queue, both given by the owner. The header has no wx dependency; the busy
-cursor for an on-demand build lives in `Lazy.cpp` and is skipped when there is no app,
-so the holder is unit-tested.
-
-- `get()` is null until the object is completely built; `built()` says the same.
-- `ensure()` builds whatever is left now, under a busy cursor, and returns the object, or
-  null in the two cases below. A click on an unbuilt tab or a first open of a dialog goes
-  through this, and it logs the units and time it took.
-- `build_step()` runs one unit of construction and returns true while more remain. The
-  first unit is the factory call, and each later unit is one `StagedBuild` step if the
-  type has them.
-- `when_built(fn)` runs `fn(object)` now if it exists, otherwise once it is built.
-- `pending()` says whether the idle prebuild has work here: not built, and the factory
-  has not returned null. A null factory result is logged and the holder stays unbuilt.
-- A unit that pumps the event loop cannot re-enter the holder; a nested `build_step()`
-  does nothing and a nested `ensure()` returns null.
-- After a unit throws, the holder and the scheduler still run the next one.
-
-The holder does not own the object; its wx parent does, as for any window. A type with
-one instance in the app derives from `LazyInstance<T>`, which points at that instance's
-holder (the holder registers itself, and a recreated `MainFrame`'s holder replaces the
-old frame's) and gives the type the static entry points the rest of the app uses,
-`T::if_built()`, `T::ensure()` and `T::when_built(fn)`. They return null, or do
-nothing, while no holder exists, so a caller needs no `mainframe` check.
-
-`built()` is an atomic flag, since a job worker reads it through the statics
-(`MainFrame::get_calibration_curr_tab()`); it is set after the object is complete.
-
-`LazyBase` is the holder's type-free interface (`name()`, `built()`, `pending()`,
-`build_step()`, `prebuild_order()`) and is what the scheduler side sees.
-
-### LazyPage<Panel>: the placeholder
-
-A `wxPanel` placed in the parent in place of the real panel, and a `Lazy<Panel>` whose
-factory makes the panel inside it (by default `new Panel(parent)`). The notebook needs a
-page object for the tab to exist and for `show_device()` to insert and remove tabs by
-pointer, and the placeholder is that object. `MainFrame` creates every page once, named
-after its `TAB_ID_*`, and keeps it for the frame's life; `show_device()` only moves
-pages in and out of the book.
-
-- `Show()` is forwarded to the panel, so a panel's own `Show()` override stays its
-  activation hook (refresh timers, machine sync) and `SelectPageByName()` works
-  unchanged. A show builds the panel unless the frame itself is still hidden, because
-  the book selects its first page as it is inserted; `MainFrame::Show()` shows the
-  current page again when the frame becomes visible, which builds it.
-- `in_book()` says whether the parent notebook currently lists the page, and
-  `pending()` is that and not built, so a tab `show_device()` has taken out of the book
-  is not prebuilt.
-- A panel built while its page is hidden stays hidden, and a completed panel gets the
-  dark-mode pass the frame ran before it existed.
-
-The Compare presets dialog is a holder without a page. `MainFrame` keeps a
-`Lazy<DiffPresetDialog>` whose factory constructs the dialog and binds its events, the
-dialog derives from `LazyInstance`, and its callers use
-`DiffPresetDialog::ensure()->show()` and `DiffPresetDialog::if_built()` like a tab's
-callers do. Saving a preset refreshes the dialog only while it is shown, since `show()`
-reloads the presets.
-
-### StagedBuild: construction in units
-
-A mixin for a panel whose constructor is too big to be one unit. The constructor builds
-the skeleton (sizers, and the parts other code may touch) and queues the rest with
-`add_build_step()`. `build_step()` runs one step, and `add_build_steps_of(child)`
-forwards a child's steps so a nested panel is spread the same way; the parent is built
-only once the child is, including steps the child queues later. Steps run in order, on
-the main thread. A `Lazy<T>` recognises a staged type at compile time and runs its steps
-one per unit.
-
-Nothing may touch what a step builds before the last step has run. In practice:
-
-- nothing paints the panel before it is complete, since a panel built at idle is hidden
-  with its page and one built on demand finishes inside `ensure()` before the event loop
-  runs again;
-- members created in steps are initialised to null in the header, so a partially built
-  panel can be destroyed;
-- timers and event handlers that use step content check `built()` first
-  (`MonitorPanel::update_all()`, `CalibrationPanel::update_all()`), and a child's steps
-  are queued before anything in the constructor can fire such a handler;
-- a destructor that disconnects from step content checks `built()` first;
-- a constructor or step does not take focus while the panel is off screen
-  (`IsShownOnScreen()` before `SetFocus()`), since it may run while the user is typing
-  elsewhere;
-- where a step's widgets must keep their place in a sizer that later steps also fill, the
-  constructor adds an empty slot sizer in that position and the step fills the slot
-  (`StatusBasePanel`).
-
-### IdleScheduler: when to build
-
-A task is any `LazyBase`: a name for the log, `pending()`, `build_step()` and
-`prebuild_order()`. `PrebuildQueue` holds the tasks by order (equal order in the order
-added) and runs a slice, the units of the first pending task until it completes, the
-budget is spent on the clock it is given, or the interrupt predicate says input arrived.
-It has no wx dependency and is unit-tested with a fake clock. A task whose work is gone
-is passed over and stays in the queue, so a tab that `show_device()` removes and later
-re-inserts is pending again.
-
-`IdleScheduler` drives the queue with the real clock, the app's input timestamp and the
-Windows queue check, and logs each unit and slice. Each slice is a timer message: a
-period of 250 ms while waiting for the user to go quiet, and a one-shot of zero after a
-slice that left work, so the event loop dispatches whatever it has queued (paint,
-timers, input) before the next slice runs. Chaining slices with `CallAfter` would not do
-this: wx drains pending events fully before the next native message, on every platform.
-On GTK the one-shot is 5 ms, because a due GLib timeout runs ahead of the redraw and
-idle sources that paint and deliver posted events.
-A slice runs only once the user has been idle for the quiet time, and the timer stops
-itself once no task is pending. The tick period, quiet time and slice length are
-constants in `IdleScheduler.cpp`. A unit cannot be interrupted once started, so the
-largest unit bounds click latency on Windows; on the other platforms a click also waits
-for the rest of the slice. A unit that pumps the event loop lets the timer fire inside
-its own slice, and that tick does nothing.
-
-The tasks are made by their owners. `MainFrame::prebuild_pages_when_idle()` registers
-every `LazyPage` the frame created, in or out of the book (`pending()` is false for a
-page out of the book), the Compare presets holder, and the Prepare sidebar's settings
-page from `ParamsPanel::settings_page_prebuild()`, whose first unit selects the default
-tab if none is selected yet and whose later units build one option group each.
-`show_device()` only restarts the timer. `MainFrame` owns the scheduler because it owns
-everything the tasks build, and clearing the queue with the frame is what keeps a task
-from outliving its object.
-
-Idle time comes from `GUI_App::FilterEvent`, which timestamps mouse and keyboard events
-(`wxEVT_CATEGORY_USER_INPUT` minus command events, which all claim that category), and
-`GUI_App::input_idle_ms()` reports it. On Windows a slice additionally refuses to start
-when the message queue holds keyboard, button, touch or pen input. Mouse moves are
-excluded because Windows synthesises one whenever a window appears under the cursor,
-which every unit does. Other platforms use the timestamp alone.
-
-Once every registered page is built the timer is stopped and the subsystem costs
-nothing.
-
-## Rules
-
-**What builds before the first frame.** The Prepare tab's plater, because `post_init()`
-needs its GL canvas on screen to initialise OpenGL in every startup state, and the start
-page the user configured. Home is built by the first `MainFrame::Show()`, Prepare's
-settings page by selecting the tab. `post_init()` passes through the Prepare tab for GL
-init under `Freeze()` with `MainFrame::select_prepare_for_gl_init()`, which changes the
-selection without the page-changed event, so nothing else is built for that pass.
-
-**Reaching a lazy object.** A caller uses the type's own statics. `T::if_built()` may
-return null and is for telling the object something it can live without (a rescale, a
-colour change, a status update). `T::ensure()` builds the object and is for navigating
-to it or for a caller that is about to show it. A caller that tells the object something
-it would not fetch for itself on construction uses `T::when_built()`, which keeps the
-message until the object exists. A panel that pulls its state when constructed (the Home
-page requests the recent list on load, the Device tab reads the device manager on show)
-is reached with `if_built()`; one that cannot pull gets `when_built()`.
-
-**Unit size.** A unit cannot be interrupted, so it should stay within the slice length on
-a fast machine. A constructor above that is staged. A single widget above it is the
-floor unless the widget itself is split.
-
-**Order.** Cheapest and most likely to be opened first, given where `MainFrame` creates
-each holder. The settings page is 0 (the Prepare tab's own content), Home 10, Device 20
-(a Bambu user's usual second stop), Calibration 30, Multi-device 40, the web Device
-view 50, Project 60 (a second WebView2 instance) and the Compare presets dialog 100;
-steps of ten so a new tab takes a value between its neighbours without renumbering
-them. `MainFrame::prebuild_pages_when_idle()` registers the tasks once, from
-`post_init()`.
-
-**Never prebuilt.** A holder with a negative order, for a tab that few sessions open
-and that costs more to build unasked than it saves (the Design tab), and plugin-provided
-tabs, which are Python-side and not lazy pages.
-
-## Adopting it
-
-A lazy tab needs:
-
-1. The panel derived from `LazyInstance<Panel>`, since a tab's panel has one instance.
-2. A `LazyPage<Panel>*` member in `MainFrame`, created once in `init_tabpanel()` with
-   its `TAB_ID_*` as the name, its place by the order rule (and a factory if
-   `new Panel(parent)` is not enough), added to `m_lazy_pages`, and used wherever the
-   tab is added to or looked up in the notebook.
-3. Every use of the panel outside `MainFrame` going through one of the panel's statics,
-   chosen by the rule above. When converting an existing member, `grep` for it; the
-   compiler finds the rest.
-4. A constructor that copes with the frame already existing and the user being busy
-   elsewhere, since `wxGetApp().mainframe` is set, the frame may be shown, and the user
-   may be typing when a lazy panel is built: no `SetFocus()` while off screen, and
-   whatever the constructor did through a `MainFrame` accessor before (a mode update, a
-   deferred URL) done in the constructor itself.
-
-To stage a heavy constructor, inherit `StagedBuild`, keep the skeleton in the constructor,
-move the rest into `add_build_step()` lambdas in the original order, and follow the
-staged-panel rules above. Measure the units. A step that is still one big widget has to
-be split inside that widget or accepted as the floor.
-
-Verification is by log. `MainFrame::prebuild_pages_when_idle` lists the queue it
-registered, `IdleScheduler::tick` reports each completed task by name at info level and
-each slice and unit at debug level, and `Lazy::ensure` reports an object a user built
-on demand with the units and time it took. A run from the configured start
-page shows every registered page complete, in order, with no unit longer than intended.
-A click on a tab mid-prebuild shows the finished panel with an `ensure` line for what was
-left, and the slices resume for the remaining tasks once the user is idle again.

docs/HLSD/printer-agent.md

@@ -0,0 +1,240 @@
+# Printer agents
+
+Printer agents isolate printer-specific communication from the rest of OrcaSlicer. The GUI and
+`DeviceManager` operate on a shared set of printer operations and device state; a selected printer
+agent implements those operations for a particular printer ecosystem. The agent boundary allows
+Bambu, Moonraker-based printers, built-in integrations, and Python-provided integrations to use the
+same application workflow without making the GUI understand every printer protocol.
+
+The current boundary is an adapter boundary around the existing application contract. In particular,
+some request fields and message payloads still use the Bambu-shaped representation that existing
+`MachineObject` and `DeviceManager` code consumes. The printer agent is responsible for translating
+that representation into the protocol spoken by its printer. This is an intentional compatibility
+constraint of the current design; the interface is not yet a neutral printer protocol.
+
+The v1 dialect migration path is deliberately narrow. `DeviceManager` currently speaks the Bambu JSON
+dialect because that is the payload shape already used throughout the command and state workflow. The
+v1 `OrcaPrinterAgent` also accepts that Bambu dialect. Its transport path places the small translation
+needed for the target printer at `deliver_to_sink`, keeping the compatibility code at the edge rather
+than spreading it through `DeviceManager` or the agent interface.
+
+The eventual direction is for `DeviceManager` to produce an Orca JSON dialect. The Bambu agent will then
+own the translation from Orca JSON to Bambu's protocol, while `OrcaPrinterAgent` can forward the Orca
+payload directly to its sink. The v1 translation at `deliver_to_sink` can then be removed without
+changing `DeviceManager`, the command callers, or the rest of the agent workflow.
+
+## Components
+
+The system has four relevant layers:
+
+```text
+GUI / DeviceManager / MachineObject
+              |
+        NetworkAgent
+          /       \
+ IPrinterAgent   ICloudServiceAgent
+      |                 |
+ printer protocol   authentication and cloud services
+```
+
+### `DeviceManager` and `MachineObject`
+
+`DeviceManager` owns the application-facing printer workflow. It maintains `MachineObject` instances,
+updates their state, filters devices for the active printer agent, and initiates operations such as
+homing, temperature changes, printing, subscriptions, and camera playback.
+
+`MachineObject` remains the shared state model used by the GUI. It does not contain the implementation
+of a printer protocol. When a device is discovered or returned by a cloud query, the device is tagged
+with the active `printer_agent_id`. Device lists and selected-machine operations use that tag to avoid
+sending an operation through an agent that does not own the device.
+
+### `NetworkAgent`
+
+`NetworkAgent` is the façade used by the GUI and `DeviceManager`. It owns:
+
+- the currently selected `IPrinterAgent`;
+- the registered cloud-service instances, indexed by provider;
+- callbacks shared by the active printer agent and the application;
+- the forwarding methods for printer commands and cloud operations.
+
+There is one active printer agent for the currently selected printer preset. Switching the preset
+increments the machine-list generation, disconnects the old printer agent, removes its callbacks, and
+installs the newly selected agent. The façade then forwards printer operations to that agent.
+
+Cloud operations are selected separately using a provider key. `NetworkAgent` forwards a cloud request
+to the matching `ICloudServiceAgent`, and forwards cloud camera operations with a device ID. The
+printer agent receives a cloud-agent pointer through `set_cloud_agent()` when it is created, allowing
+printer communication to obtain cloud tokens without depending on a concrete cloud implementation.
+
+### `IPrinterAgent`
+
+`IPrinterAgent` is the printer-facing contract. It covers:
+
+- cloud-relay and direct-LAN message delivery;
+- LAN connection, discovery, binding, and certificates;
+- printer subscriptions and callbacks;
+- print operations;
+- filament synchronization;
+- camera capability and local camera URL reporting;
+- printer command methods.
+
+Concrete built-in implementations include the Bambu wrapper, the native Orca/Moonraker path, and
+other printer-agent implementations registered by the application. A printer agent may use either
+the cloud agent, a direct LAN connection, or both.
+
+### `ICloudServiceAgent`
+
+`ICloudServiceAgent` owns authentication and services provided by a cloud backend. It covers login
+state, tokens, user and printer lists, settings synchronization, model services, cloud messages, and
+cloud camera operations.
+
+Cloud camera operations are device-scoped:
+
+- `get_camera_url(dev_id, callback)` obtains a stream URL for one device;
+- `create_camera_signaling_channel(dev_id)` creates signaling for one device where the provider
+  supports it.
+
+This is separate from the local camera URL exposed by `IPrinterAgent`, which is currently scoped to
+the active printer agent because a normal LAN agent represents one physical printer connection.
+
+## Agent registration and selection
+
+`NetworkAgentFactory` maintains the printer-agent registry. Each registry entry contains an agent ID,
+a display name, and a factory function. Built-in agents register during application initialization.
+Python printer-agent capabilities register dynamically and contribute an agent ID and factory entry.
+
+The selected printer preset contains the printer-agent choice. If no explicit choice is stored, the
+application preserves the existing default behavior: Bambu presets select the Bambu agent and other
+presets select the native Orca agent. When a preset is changed, `GUI_App` resolves the effective agent
+ID, obtains the corresponding cloud agent, creates the printer agent through the registry, and installs
+it in `NetworkAgent`.
+
+The registry rejects conflicting agent IDs. This matters for Python plugins because an agent ID is the
+stable identity used by presets and device ownership; two enabled plugin capabilities must not claim
+the same ID.
+
+## Message and command flow
+
+There are two low-level message paths:
+
+- `send_message()` publishes a command through the printer's cloud relay;
+- `send_message_to_printer()` sends a command directly to the printer over the LAN path.
+
+Both paths accept a JSON string, quality-of-service and flag values, and return the existing network
+status code domain. The agent owns the conversion from that JSON contract to its native transport.
+
+The typed `command_*` methods are the application-facing convenience layer. The five generic defaults
+currently implemented by `IPrinterAgent` construct the existing JSON dialect and route through the
+same message path:
+
+| Method | Default operation |
+| --- | --- |
+| `command_xyz_abs()` | Send `G90` for absolute positioning |
+| `command_auto_leveling()` | Send `G29` for bed leveling |
+| `command_go_home()` | Use the supported homing operation or send `G28` |
+| `command_set_bed()` | Use the supported bed control or send `M140` |
+| `command_set_nozzle()` | Send `M104` for nozzle temperature |
+
+These are compatibility defaults for common printer workflows, not a guarantee that every firmware
+implements every command identically. An agent can override a method when its protocol needs another
+operation. For example, a Klipper configuration may use `BED_MESH_CALIBRATE` instead of `G29`.
+
+The remaining common command methods default to `ORCA_NETWORK_ERR_CMD_NOT_SUPPORTED` because their
+existing behavior is vendor-specific or has no portable implementation:
+
+- AMS RFID refresh;
+- AMS calibration;
+- AMS tray selection;
+- camera start;
+- axis control.
+
+The methods remain on the common interface so an agent that supports them can override them explicitly.
+`sequence_id` remains part of the command contract because `DeviceManager` creates and tracks it as
+the command ID.
+
+## Device ownership and stale responses
+
+Printer-agent ownership is represented by `printer_agent_id` on device records and `MachineObject`
+instances. The active agent ID is attached when a device is discovered, returned by a cloud list, or
+reused after a preset switch. Local-machine configuration also persists the agent ID so a saved LAN
+device is not silently reused by an unrelated agent.
+
+Cloud printer-list responses carry three pieces of request context added by `NetworkAgent`:
+
+```text
+provider   cloud provider used for the request
+agent_id   active printer agent when the request was made
+generation machine-list generation when the request was made
+```
+
+`DeviceManager` accepts the response only when those values still match the current provider, active
+agent, and generation. This prevents a slow response from the previous preset or provider from
+repopulating the current device list.
+
+The provider mapping is currently selected by `GUI_App`: the Bambu agent maps to the Bambu cloud
+provider and other agents map to the Orca cloud provider. The generation check protects that existing
+selection from races; it does not make cloud-provider ownership intrinsic to an agent. Cloud-printer
+ownership and the broader Orca cloud services are therefore still separate architectural concerns.
+
+## Python printer agents
+
+`PrinterAgentPluginCapability` implements `IPrinterAgent` directly. The live capability object is
+registered with `NetworkAgentFactory` and handed out as the printer agent when its agent ID is selected.
+The plugin receives the selected `ICloudServiceAgent` through `set_cloud_agent()` just like a built-in
+printer agent.
+
+Python plugins must implement the core communication and lifecycle methods required by the interface,
+including agent metadata, printer connection, discovery callbacks, and the two message-send methods.
+Methods that are meaningful only to a particular printer are optional overrides where the C++ base
+class provides a default.
+
+All ten `command_*` methods are available in the Python binding and in the trampoline. Their override
+status is intentionally optional:
+
+- the five generic commands use the C++ default when Python does not override them;
+- the five vendor-specific commands return `NOT_SUPPORTED` unless Python supplies an implementation;
+- a Python implementation can replace either behavior for its own protocol.
+
+The Python camera binding exposes HTTP, HTTPS, RTSP, and HTTP-snapshot modes. WebRTC remains a
+built-in C++ camera mode, but is not exposed as a Python mode because the current Python capability
+does not provide the corresponding cloud signaling-channel contract.
+
+## Camera playback boundary
+
+The camera stream mode describes how a stream is obtained; it does not by itself define ownership of
+the wxWidgets view that renders it. `MediaPlayCtrl` selects and tears down the active backend, while
+the wx parent owns the child window or renderer. This is important because a web view, native media
+control, and frame-based/WebRTC renderer have different wx window-lifetime requirements.
+
+Cloud URL and signaling requests are routed through `NetworkAgent` to the cloud provider selected for
+the device. Local URL requests are routed to the active printer agent. The distinction keeps cloud
+account services device-scoped while preserving the current one-LAN-agent/one-printer model.
+
+## Compatibility constraints
+
+The printer-agent boundary intentionally preserves several existing application contracts:
+
+- Bambu-shaped JSON is still the shared command representation;
+- existing network status codes are reused, with Orca-specific unsupported/capability errors added
+  in the Orca-reserved range;
+- `MachineObject` remains the shared device-state model;
+- preset and local-machine data retain compatibility with the existing agent-selection behavior;
+- Python plugins use the existing capability and pybind11 registration system.
+
+The agent abstraction is therefore responsible for containing vendor differences, not for pretending
+that all vendor protocols are identical. The planned Orca JSON dialect is the protocol-neutral command
+model for the `DeviceManager`/agent boundary. Once it is introduced, Bambu-specific translation remains
+inside the Bambu agent and the Orca agent's v1 sink adapter can be removed as a self-contained cleanup.
+
+## Main implementation locations
+
+- [`IPrinterAgent`](../../src/slic3r/Utils/IPrinterAgent.hpp) — printer-agent contract and generic command defaults
+- [`ICloudServiceAgent`](../../src/slic3r/Utils/ICloudServiceAgent.hpp) — cloud service and per-device
+  cloud camera contract
+- [`NetworkAgent`](../../src/slic3r/Utils/NetworkAgent.hpp) — façade and dispatch between active agents
+- [`NetworkAgentFactory`](../../src/slic3r/Utils/NetworkAgentFactory.hpp) — built-in and Python agent registry
+- [`DeviceManager`](../../src/slic3r/GUI/DeviceCore/DevManager.cpp) — device ownership, filtering, and
+  stale-response checks
+- [`PrinterAgentPluginCapability`](../../src/slic3r/plugin/pluginTypes/printerAgent/PrinterAgentPluginCapability.cpp)
+  — Python bindings
+- [`MediaPlayCtrl`](../../src/slic3r/GUI/MediaPlayCtrl.cpp) — camera backend selection and playback lifecycle

resources/profiles/Sovol.json

@@ -1,7 +1,7 @@
 {
 	"name": "Sovol",
 	"url": "",
-	"version": "02.04.00.07",
+	"version": "02.04.00.04",
 	"force_update": "0",
 	"description": "Sovol configurations",
 	"machine_model_list": [
@@ -167,6 +167,10 @@
 			"name": "0.20mm Standard @Sovol SV08 MAX 0.4 nozzle",
 			"sub_path": "process/0.20mm Standard @Sovol SV08 MAX 0.4 nozzle.json"
 		},
+		{
+			"name": "0.20mm Standard @Sovol Zero 0.4 nozzle",
+			"sub_path": "process/0.20mm Standard @Sovol Zero 0.4 nozzle.json"
+		},
 		{
 			"name": "0.28mm Fast @Sovol SV06 ACE",
 			"sub_path": "process/0.28mm Fast @Sovol SV06 ACE 0.4 nozzle.json"
@@ -194,74 +198,6 @@
 		{
 			"name": "0.40mm Standard @Sovol SV08 MAX 0.8 nozzle",
 			"sub_path": "process/0.40mm Standard @Sovol SV08 MAX 0.8 nozzle.json"
-		},
-		{
-			"name": "fdm_process_zero",
-			"sub_path": "process/fdm_process_zero.json"
-		},
-		{
-			"name": "0.06mm Quality @Sovol Zero 0.2 nozzle",
-			"sub_path": "process/0.06mm Quality @Sovol Zero 0.2 nozzle.json"
-		},
-		{
-			"name": "0.10mm Standard @Sovol Zero 0.2 nozzle",
-			"sub_path": "process/0.10mm Standard @Sovol Zero 0.2 nozzle.json"
-		},
-		{
-			"name": "0.12mm Quality @Sovol Zero 0.4 nozzle",
-			"sub_path": "process/0.12mm Quality @Sovol Zero 0.4 nozzle.json"
-		},
-		{
-			"name": "0.14mm Fast @Sovol Zero 0.2 nozzle",
-			"sub_path": "process/0.14mm Fast @Sovol Zero 0.2 nozzle.json"
-		},
-		{
-			"name": "0.15mm Quality @Sovol Zero 0.6 nozzle",
-			"sub_path": "process/0.15mm Quality @Sovol Zero 0.6 nozzle.json"
-		},
-		{
-			"name": "0.20mm Quality @Sovol Zero 0.8 nozzle",
-			"sub_path": "process/0.20mm Quality @Sovol Zero 0.8 nozzle.json"
-		},
-		{
-			"name": "0.20mm Standard @Sovol Zero 0.4 nozzle",
-			"sub_path": "process/0.20mm Standard @Sovol Zero 0.4 nozzle.json"
-		},
-		{
-			"name": "0.25mm Quality @Sovol Zero 1.0 nozzle",
-			"sub_path": "process/0.25mm Quality @Sovol Zero 1.0 nozzle.json"
-		},
-		{
-			"name": "0.25mm SPEEDBENCHY @Sovol Zero 0.4 nozzle",
-			"sub_path": "process/0.25mm SPEEDBENCHY @Sovol Zero 0.4 nozzle.json"
-		},
-		{
-			"name": "0.28mm Fast @Sovol Zero 0.4 nozzle",
-			"sub_path": "process/0.28mm Fast @Sovol Zero 0.4 nozzle.json"
-		},
-		{
-			"name": "0.30mm Standard @Sovol Zero 0.6 nozzle",
-			"sub_path": "process/0.30mm Standard @Sovol Zero 0.6 nozzle.json"
-		},
-		{
-			"name": "0.40mm Standard @Sovol Zero 0.8 nozzle",
-			"sub_path": "process/0.40mm Standard @Sovol Zero 0.8 nozzle.json"
-		},
-		{
-			"name": "0.42mm Fast @Sovol Zero 0.6 nozzle",
-			"sub_path": "process/0.42mm Fast @Sovol Zero 0.6 nozzle.json"
-		},
-		{
-			"name": "0.50mm Standard @Sovol Zero 1.0 nozzle",
-			"sub_path": "process/0.50mm Standard @Sovol Zero 1.0 nozzle.json"
-		},
-		{
-			"name": "0.56mm Fast @Sovol Zero 0.8 nozzle",
-			"sub_path": "process/0.56mm Fast @Sovol Zero 0.8 nozzle.json"
-		},
-		{
-			"name": "0.70mm Fast @Sovol Zero 1.0 nozzle",
-			"sub_path": "process/0.70mm Fast @Sovol Zero 1.0 nozzle.json"
 		}
 	],
 	"filament_list": [
@@ -313,10 +249,6 @@
 			"name": "Generic PETG @Sovol Zero",
 			"sub_path": "filament/Generic PETG @Sovol Zero.json"
 		},
-		{
-			"name": "Generic PETG @Sovol Zero Hardened Steel nozzle",
-			"sub_path": "filament/Generic PETG @Sovol Zero Hardened Steel nozzle.json"
-		},
 		{
 			"name": "Generic PLA @Sovol SV06 ACE",
 			"sub_path": "filament/Generic PLA @Sovol SV06 ACE.json"
@@ -345,14 +277,6 @@
 			"name": "Generic PLA @Sovol Zero",
 			"sub_path": "filament/Generic PLA @Sovol Zero.json"
 		},
-		{
-			"name": "Generic PLA @Sovol Zero Hardened Steel nozzle",
-			"sub_path": "filament/Generic PLA @Sovol Zero Hardened Steel nozzle.json"
-		},
-		{
-			"name": "Generic PLA SPEEDBENCHY @Sovol Zero",
-			"sub_path": "filament/Generic PLA SPEEDBENCHY @Sovol Zero.json"
-		},
 		{
 			"name": "Generic PLA Silk @Sovol SV08 MAX",
 			"sub_path": "filament/Generic PLA Silk @Sovol SV08 MAX.json"
@@ -361,10 +285,6 @@
 			"name": "Generic PLA Silk @Sovol Zero",
 			"sub_path": "filament/Generic PLA Silk @Sovol Zero.json"
 		},
-		{
-			"name": "Generic PLA Silk @Sovol Zero Hardened Steel nozzle",
-			"sub_path": "filament/Generic PLA Silk @Sovol Zero Hardened Steel nozzle.json"
-		},
 		{
 			"name": "Generic TPU @Sovol SV06 ACE",
 			"sub_path": "filament/Generic TPU @Sovol SV06 ACE.json"
@@ -392,6 +312,18 @@
 		{
 			"name": "SUNLU PETG @Sovol SV08 MAX",
 			"sub_path": "filament/SUNLU PETG @Sovol SV08 MAX.json"
+		},
+		{
+			"name": "Sovol Zero PETG HS Nozzle",
+			"sub_path": "filament/Sovol Zero PETG HS Nozzle.json"
+		},
+		{
+			"name": "Sovol Zero PLA Basic HS Nozzle",
+			"sub_path": "filament/Sovol Zero PLA Basic HS Nozzle.json"
+		},
+		{
+			"name": "Sovol Zero PLA Silk HS Nozzle",
+			"sub_path": "filament/Sovol Zero PLA Silk HS Nozzle.json"
 		}
 	],
 	"machine_list": [
@@ -483,45 +415,9 @@
 			"name": "Sovol SV08 MAX 0.8 nozzle",
 			"sub_path": "machine/Sovol SV08 MAX 0.8 nozzle.json"
 		},
-		{
-			"name": "Sovol Zero 0.2 nozzle",
-			"sub_path": "machine/Sovol Zero 0.2 nozzle.json"
-		},
 		{
 			"name": "Sovol Zero 0.4 nozzle",
 			"sub_path": "machine/Sovol Zero 0.4 nozzle.json"
-		},
-		{
-			"name": "Sovol Zero 0.6 nozzle",
-			"sub_path": "machine/Sovol Zero 0.6 nozzle.json"
-		},
-		{
-			"name": "Sovol Zero 0.8 nozzle",
-			"sub_path": "machine/Sovol Zero 0.8 nozzle.json"
-		},
-		{
-			"name": "Sovol Zero 1.0 nozzle",
-			"sub_path": "machine/Sovol Zero 1.0 nozzle.json"
-		},
-		{
-			"name": "Sovol Zero 0.2 Hardened Steel nozzle",
-			"sub_path": "machine/Sovol Zero 0.2 Hardened Steel nozzle.json"
-		},
-		{
-			"name": "Sovol Zero 0.4 Hardened Steel nozzle",
-			"sub_path": "machine/Sovol Zero 0.4 Hardened Steel nozzle.json"
-		},
-		{
-			"name": "Sovol Zero 0.6 Hardened Steel nozzle",
-			"sub_path": "machine/Sovol Zero 0.6 Hardened Steel nozzle.json"
-		},
-		{
-			"name": "Sovol Zero 0.8 Hardened Steel nozzle",
-			"sub_path": "machine/Sovol Zero 0.8 Hardened Steel nozzle.json"
-		},
-		{
-			"name": "Sovol Zero 1.0 Hardened Steel nozzle",
-			"sub_path": "machine/Sovol Zero 1.0 Hardened Steel nozzle.json"
 		}
 	]
 }

resources/profiles/Sovol/filament/Generic ABS @Sovol Zero.json

@@ -1,11 +1,10 @@
 {
 	"type": "filament",
 	"name": "Generic ABS @Sovol Zero",
+	"inherits": "Generic ABS @System",
 	"renamed_from": "Sovol Zero ABS",
-	"inherits": "fdm_filament_abs",
 	"from": "system",
 	"setting_id": "g6sSyyIFYJUzlXsp",
-	"filament_id": "OFY9muEs",
 	"instantiation": "true",
 	"filament_flow_ratio": [
 		"0.98"
@@ -74,39 +73,6 @@
 		"0"
 	],
 	"compatible_printers": [
-		"Sovol Zero 0.2 nozzle",
-		"Sovol Zero 0.4 nozzle",
-		"Sovol Zero 0.6 nozzle",
-		"Sovol Zero 0.8 nozzle",
-		"Sovol Zero 1.0 nozzle",
-		"Sovol Zero 0.2 Hardened Steel nozzle",
-		"Sovol Zero 0.4 Hardened Steel nozzle",
-		"Sovol Zero 0.6 Hardened Steel nozzle",
-		"Sovol Zero 0.8 Hardened Steel nozzle",
-		"Sovol Zero 1.0 Hardened Steel nozzle"
-	],
-	"cool_plate_temp": [
-		"80"
-	],
-	"eng_plate_temp": [
-		"80"
-	],
-	"textured_plate_temp": [
-		"80"
-	],
-	"cool_plate_temp_initial_layer": [
-		"80"
-	],
-	"eng_plate_temp_initial_layer": [
-		"80"
-	],
-	"textured_plate_temp_initial_layer": [
-		"80"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	],
-	"filament_density": [
-		"1.10"
+		"Sovol Zero 0.4 nozzle"
 	]
 }

resources/profiles/Sovol/filament/Generic PC @Sovol Zero.json

@@ -1,12 +1,11 @@
 {
 	"type": "filament",
-	"filament_id": "OFLakOUI",
-	"setting_id": "yRKCiPMN6fxibcyg",
 	"name": "Generic PC @Sovol Zero",
+	"inherits": "Generic PC @System",
 	"renamed_from": "Sovol Zero PC",
 	"from": "system",
+	"setting_id": "yRKCiPMN6fxibcyg",
 	"instantiation": "true",
-	"inherits": "fdm_filament_pc",
 	"filament_flow_ratio": [
 		"0.98"
 	],
@@ -14,16 +13,7 @@
 		"21"
 	],
 	"compatible_printers": [
-		"Sovol Zero 0.2 nozzle",
-		"Sovol Zero 0.4 nozzle",
-		"Sovol Zero 0.6 nozzle",
-		"Sovol Zero 0.8 nozzle",
-		"Sovol Zero 1.0 nozzle",
-		"Sovol Zero 0.2 Hardened Steel nozzle",
-		"Sovol Zero 0.4 Hardened Steel nozzle",
-		"Sovol Zero 0.6 Hardened Steel nozzle",
-		"Sovol Zero 0.8 Hardened Steel nozzle",
-		"Sovol Zero 1.0 Hardened Steel nozzle"
+		"Sovol Zero 0.4 nozzle"
 	],
 	"nozzle_temperature_initial_layer": [
 		"290"
@@ -61,9 +51,7 @@
 	"slow_down_min_speed": [
 		"10"
 	],
-	"dont_slow_down_outer_wall": [
-		"0"
-	],
+	"dont_slow_down_outer_wall": "0",
 	"overhang_fan_speed": [
 		"20"
 	],
@@ -73,19 +61,8 @@
 	"temperature_vitrification": [
 		"60"
 	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"activate_air_filtration": [
-		"1"
-	],
-	"during_print_exhaust_fan_speed": [
-		"50"
-	],
-	"complete_print_exhaust_fan_speed": [
-		"50"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
+	"additional_cooling_fan_speed": "0",
+	"activate_air_filtration": "1",
+	"during_print_exhaust_fan_speed": "50",
+	"complete_print_exhaust_fan_speed": "50"
 }

resources/profiles/Sovol/filament/Generic PETG @Sovol Zero Hardened Steel nozzle.json

@@ -1,116 +0,0 @@
-{
-	"type": "filament",
-	"filament_id": "OFYPdQJh",
-	"setting_id": "d9QbCESNz3ZLU6eu",
-	"name": "Generic PETG @Sovol Zero Hardened Steel nozzle",
-	"renamed_from": "Sovol Zero PETG HS Nozzle",
-	"from": "system",
-	"instantiation": "true",
-	"inherits": "fdm_filament_pet",
-	"filament_flow_ratio": [
-		"0.98"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"pressure_advance": [
-		"0.048"
-	],
-	"filament_max_volumetric_speed": [
-		"15"
-	],
-	"nozzle_temperature_initial_layer": [
-		"265"
-	],
-	"nozzle_temperature": [
-		"250"
-	],
-	"nozzle_temperature_range_low": [
-		"230"
-	],
-	"nozzle_temperature_range_high": [
-		"280"
-	],
-	"hot_plate_temp": [
-		"85"
-	],
-	"hot_plate_temp_initial_layer": [
-		"85"
-	],
-	"fan_min_speed": [
-		"10"
-	],
-	"fan_max_speed": [
-		"40"
-	],
-	"fan_cooling_layer_time": [
-		"50"
-	],
-	"full_fan_speed_layer": [
-		"3"
-	],
-	"slow_down_layer_time": [
-		"10"
-	],
-	"slow_down_min_speed": [
-		"10"
-	],
-	"overhang_fan_speed": [
-		"70"
-	],
-	"overhang_fan_threshold": [
-		"10%"
-	],
-	"temperature_vitrification": [
-		"60"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"filament_retraction_length": [
-		"0.5"
-	],
-	"filament_z_hop": [
-		"0.4"
-	],
-	"activate_air_filtration": [
-		"1"
-	],
-	"during_print_exhaust_fan_speed": [
-		"50"
-	],
-	"complete_print_exhaust_fan_speed": [
-		"50"
-	],
-	"compatible_printers": [
-		"Sovol Zero 0.2 Hardened Steel nozzle",
-		"Sovol Zero 0.4 Hardened Steel nozzle",
-		"Sovol Zero 0.6 Hardened Steel nozzle",
-		"Sovol Zero 0.8 Hardened Steel nozzle",
-		"Sovol Zero 1.0 Hardened Steel nozzle"
-	],
-	"cool_plate_temp": [
-		"85"
-	],
-	"eng_plate_temp": [
-		"85"
-	],
-	"textured_plate_temp": [
-		"85"
-	],
-	"cool_plate_temp_initial_layer": [
-		"85"
-	],
-	"eng_plate_temp_initial_layer": [
-		"85"
-	],
-	"textured_plate_temp_initial_layer": [
-		"85"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	]
-}

resources/profiles/Sovol/filament/Generic PETG @Sovol Zero.json

@@ -1,21 +1,16 @@
 {
 	"type": "filament",
-	"filament_id": "OFYPdQJh",
-	"setting_id": "i4OW2eAtXOKdtVNj",
 	"name": "Generic PETG @Sovol Zero",
+	"inherits": "Generic PETG @System",
 	"renamed_from": "Sovol Zero PETG",
 	"from": "system",
+	"setting_id": "i4OW2eAtXOKdtVNj",
 	"instantiation": "true",
-	"inherits": "fdm_filament_pet",
 	"filament_flow_ratio": [
 		"1.0348"
 	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"pressure_advance": [
-		"0.046"
-	],
+	"enable_pressure_advance": "1",
+	"pressure_advance": "0.046",
 	"filament_max_volumetric_speed": [
 		"15"
 	],
@@ -73,44 +68,10 @@
 	"filament_z_hop": [
 		"0.4"
 	],
-	"activate_air_filtration": [
-		"1"
-	],
-	"during_print_exhaust_fan_speed": [
-		"50"
-	],
-	"complete_print_exhaust_fan_speed": [
-		"50"
-	],
+	"activate_air_filtration": "1",
+	"during_print_exhaust_fan_speed": "50",
+	"complete_print_exhaust_fan_speed": "50",
 	"compatible_printers": [
-		"Sovol Zero 0.2 nozzle",
-		"Sovol Zero 0.4 nozzle",
-		"Sovol Zero 0.6 nozzle",
-		"Sovol Zero 0.8 nozzle",
-		"Sovol Zero 1.0 nozzle"
-	],
-	"cool_plate_temp": [
-		"85"
-	],
-	"eng_plate_temp": [
-		"85"
-	],
-	"textured_plate_temp": [
-		"85"
-	],
-	"cool_plate_temp_initial_layer": [
-		"85"
-	],
-	"eng_plate_temp_initial_layer": [
-		"85"
-	],
-	"textured_plate_temp_initial_layer": [
-		"85"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
+		"Sovol Zero 0.4 nozzle"
 	]
 }

resources/profiles/Sovol/filament/Generic PLA @Sovol Zero Hardened Steel nozzle.json

@@ -1,110 +0,0 @@
-{
-	"type": "filament",
-	"filament_id": "OFDSrzZ8",
-	"setting_id": "nZgETe4CTpicEjQX",
-	"name": "Generic PLA @Sovol Zero Hardened Steel nozzle",
-	"renamed_from": "Sovol Zero PLA Basic HS Nozzle",
-	"from": "system",
-	"instantiation": "true",
-	"inherits": "fdm_filament_pla",
-	"filament_flow_ratio": [
-		"1.0348"
-	],
-	"filament_max_volumetric_speed": [
-		"21"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"pressure_advance": [
-		"0.03"
-	],
-	"compatible_printers": [
-		"Sovol Zero 0.2 Hardened Steel nozzle",
-		"Sovol Zero 0.4 Hardened Steel nozzle",
-		"Sovol Zero 0.6 Hardened Steel nozzle",
-		"Sovol Zero 0.8 Hardened Steel nozzle",
-		"Sovol Zero 1.0 Hardened Steel nozzle"
-	],
-	"nozzle_temperature_initial_layer": [
-		"245"
-	],
-	"nozzle_temperature": [
-		"230"
-	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
-	"nozzle_temperature_range_high": [
-		"250"
-	],
-	"hot_plate_temp": [
-		"65"
-	],
-	"hot_plate_temp_initial_layer": [
-		"65"
-	],
-	"fan_min_speed": [
-		"70"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_cooling_layer_time": [
-		"80"
-	],
-	"full_fan_speed_layer": [
-		"3"
-	],
-	"slow_down_layer_time": [
-		"5"
-	],
-	"slow_down_min_speed": [
-		"10"
-	],
-	"dont_slow_down_outer_wall": [
-		"0"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"temperature_vitrification": [
-		"60"
-	],
-	"additional_cooling_fan_speed": [
-		"75%"
-	],
-	"activate_air_filtration": [
-		"1"
-	],
-	"during_print_exhaust_fan_speed": [
-		"80%"
-	],
-	"complete_print_exhaust_fan_speed": [
-		"80%"
-	],
-	"cool_plate_temp": [
-		"60"
-	],
-	"eng_plate_temp": [
-		"60"
-	],
-	"textured_plate_temp": [
-		"60"
-	],
-	"cool_plate_temp_initial_layer": [
-		"55"
-	],
-	"eng_plate_temp_initial_layer": [
-		"55"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	]
-}

resources/profiles/Sovol/filament/Generic PLA @Sovol Zero.json

@@ -1,24 +1,21 @@
 {
 	"type": "filament",
-	"filament_id": "OFDSrzZ8",
-	"setting_id": "NNDerIjh7qtuh1I3",
 	"name": "Generic PLA @Sovol Zero",
+	"inherits": "Generic PLA @System",
 	"renamed_from": "Sovol Zero PLA Basic",
 	"from": "system",
+	"setting_id": "NNDerIjh7qtuh1I3",
 	"instantiation": "true",
-	"inherits": "fdm_filament_pla",
 	"filament_flow_ratio": [
 		"0.98"
 	],
 	"filament_max_volumetric_speed": [
-		"25"
+		"21"
 	],
+	"enable_pressure_advance": "1",
+	"pressure_advance": "0.032",
 	"compatible_printers": [
-		"Sovol Zero 0.2 nozzle",
-		"Sovol Zero 0.4 nozzle",
-		"Sovol Zero 0.6 nozzle",
-		"Sovol Zero 0.8 nozzle",
-		"Sovol Zero 1.0 nozzle"
+		"Sovol Zero 0.4 nozzle"
 	],
 	"nozzle_temperature_initial_layer": [
 		"230"
@@ -27,28 +24,28 @@
 		"210"
 	],
 	"nozzle_temperature_range_low": [
-		"180"
+		"190"
 	],
 	"nozzle_temperature_range_high": [
-		"240"
+		"250"
 	],
 	"hot_plate_temp": [
-		"60"
+		"65"
 	],
 	"hot_plate_temp_initial_layer": [
-		"60"
+		"65"
 	],
 	"fan_min_speed": [
-		"100"
+		"70"
 	],
 	"fan_max_speed": [
 		"100"
 	],
 	"fan_cooling_layer_time": [
-		"60"
+		"80"
 	],
 	"full_fan_speed_layer": [
-		"2"
+		"3"
 	],
 	"slow_down_layer_time": [
 		"5"
@@ -56,43 +53,18 @@
 	"slow_down_min_speed": [
 		"10"
 	],
+	"dont_slow_down_outer_wall": "0",
 	"overhang_fan_speed": [
 		"100"
 	],
 	"overhang_fan_threshold": [
-		"10%"
+		"50%"
 	],
 	"temperature_vitrification": [
-		"50"
-	],
-	"filament_z_hop": [
-		"0.4"
-	],
-	"filament_retraction_length": [
-		"0.4"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"cool_plate_temp": [
 		"60"
 	],
-	"eng_plate_temp": [
-		"60"
-	],
-	"textured_plate_temp": [
-		"60"
-	],
-	"cool_plate_temp_initial_layer": [
-		"55"
-	],
-	"eng_plate_temp_initial_layer": [
-		"55"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	]
+	"additional_cooling_fan_speed": "75%",
+	"activate_air_filtration": "1",
+	"during_print_exhaust_fan_speed": "80%",
+	"complete_print_exhaust_fan_speed": "80%"
 }

resources/profiles/Sovol/filament/Generic PLA SPEEDBENCHY @Sovol Zero.json

@@ -1,118 +0,0 @@
-{
-	"type": "filament",
-	"filament_id": "OFIUkWYN",
-	"setting_id": "MC2InZ7iKDjIGike",
-	"name": "Generic PLA SPEEDBENCHY @Sovol Zero",
-	"from": "system",
-	"instantiation": "true",
-	"inherits": "fdm_filament_pla",
-	"filament_flow_ratio": [
-		"1"
-	],
-	"filament_max_volumetric_speed": [
-		"50"
-	],
-	"compatible_printers": [
-		"Sovol Zero 0.4 nozzle",
-		"Sovol Zero 0.4 Hardened Steel nozzle"
-	],
-	"nozzle_temperature_initial_layer": [
-		"245"
-	],
-	"nozzle_temperature": [
-		"225"
-	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
-	"nozzle_temperature_range_high": [
-		"250"
-	],
-	"hot_plate_temp": [
-		"65"
-	],
-	"hot_plate_temp_initial_layer": [
-		"65"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"pressure_advance": [
-		"0.032"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_cooling_layer_time": [
-		"30"
-	],
-	"full_fan_speed_layer": [
-		"3"
-	],
-	"slow_down_layer_time": [
-		"1.7"
-	],
-	"slow_down_min_speed": [
-		"40"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"75%"
-	],
-	"additional_cooling_fan_speed": [
-		"100"
-	],
-	"filament_z_hop": [
-		"0"
-	],
-	"filament_retraction_length": [
-		"0.35"
-	],
-	"filament_retraction_speed": [
-		"90"
-	],
-	"filament_deretraction_speed": [
-		"90"
-	],
-	"filament_retract_before_wipe": [
-		"0%"
-	],
-	"filament_wipe_distance": [
-		"2"
-	],
-	"filament_retract_when_changing_layer": [
-		"0"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"cool_plate_temp": [
-		"60"
-	],
-	"eng_plate_temp": [
-		"60"
-	],
-	"textured_plate_temp": [
-		"60"
-	],
-	"cool_plate_temp_initial_layer": [
-		"55"
-	],
-	"eng_plate_temp_initial_layer": [
-		"55"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"temperature_vitrification": [
-		"100"
-	]
-}

resources/profiles/Sovol/filament/Generic PLA Silk @Sovol Zero Hardened Steel nozzle.json

@@ -1,110 +0,0 @@
-{
-	"type": "filament",
-	"filament_id": "OFesA6rF",
-	"setting_id": "LA8X1RsMdV2xNT1o",
-	"name": "Generic PLA Silk @Sovol Zero Hardened Steel nozzle",
-	"renamed_from": "Sovol Zero PLA Silk HS Nozzle",
-	"from": "system",
-	"instantiation": "true",
-	"inherits": "fdm_filament_pla",
-	"filament_flow_ratio": [
-		"0.98"
-	],
-	"filament_max_volumetric_speed": [
-		"15"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"pressure_advance": [
-		"0.027"
-	],
-	"compatible_printers": [
-		"Sovol Zero 0.2 Hardened Steel nozzle",
-		"Sovol Zero 0.4 Hardened Steel nozzle",
-		"Sovol Zero 0.6 Hardened Steel nozzle",
-		"Sovol Zero 0.8 Hardened Steel nozzle",
-		"Sovol Zero 1.0 Hardened Steel nozzle"
-	],
-	"nozzle_temperature_initial_layer": [
-		"245"
-	],
-	"nozzle_temperature": [
-		"230"
-	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
-	"nozzle_temperature_range_high": [
-		"250"
-	],
-	"hot_plate_temp": [
-		"65"
-	],
-	"hot_plate_temp_initial_layer": [
-		"65"
-	],
-	"fan_min_speed": [
-		"70"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_cooling_layer_time": [
-		"80"
-	],
-	"full_fan_speed_layer": [
-		"3"
-	],
-	"slow_down_layer_time": [
-		"5"
-	],
-	"slow_down_min_speed": [
-		"10"
-	],
-	"dont_slow_down_outer_wall": [
-		"0"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"temperature_vitrification": [
-		"60"
-	],
-	"additional_cooling_fan_speed": [
-		"75%"
-	],
-	"activate_air_filtration": [
-		"1"
-	],
-	"during_print_exhaust_fan_speed": [
-		"80%"
-	],
-	"complete_print_exhaust_fan_speed": [
-		"80%"
-	],
-	"cool_plate_temp": [
-		"60"
-	],
-	"eng_plate_temp": [
-		"60"
-	],
-	"textured_plate_temp": [
-		"60"
-	],
-	"cool_plate_temp_initial_layer": [
-		"55"
-	],
-	"eng_plate_temp_initial_layer": [
-		"55"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	]
-}

resources/profiles/Sovol/filament/Generic PLA Silk @Sovol Zero.json

@@ -1,30 +1,27 @@
 {
 	"type": "filament",
-	"filament_id": "OFesA6rF",
-	"setting_id": "Se2yKerHRStYtWf5",
 	"name": "Generic PLA Silk @Sovol Zero",
+	"inherits": "Generic PLA Silk @System",
 	"renamed_from": "Sovol Zero PLA Silk",
 	"from": "system",
+	"setting_id": "Se2yKerHRStYtWf5",
 	"instantiation": "true",
-	"inherits": "fdm_filament_pla",
+	"filament_multitool_ramming_flow": [
+		"20"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
 	"filament_flow_ratio": [
 		"0.98"
 	],
 	"filament_max_volumetric_speed": [
 		"15"
 	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"pressure_advance": [
-		"0.029"
-	],
+	"enable_pressure_advance": "1",
+	"pressure_advance": "0.029",
 	"compatible_printers": [
-		"Sovol Zero 0.2 nozzle",
-		"Sovol Zero 0.4 nozzle",
-		"Sovol Zero 0.6 nozzle",
-		"Sovol Zero 0.8 nozzle",
-		"Sovol Zero 1.0 nozzle"
+		"Sovol Zero 0.4 nozzle"
 	],
 	"nozzle_temperature_initial_layer": [
 		"245"
@@ -62,9 +59,7 @@
 	"slow_down_min_speed": [
 		"10"
 	],
-	"dont_slow_down_outer_wall": [
-		"0"
-	],
+	"dont_slow_down_outer_wall": "0",
 	"overhang_fan_speed": [
 		"100"
 	],
@@ -74,43 +69,8 @@
 	"temperature_vitrification": [
 		"60"
 	],
-	"additional_cooling_fan_speed": [
-		"75%"
-	],
-	"activate_air_filtration": [
-		"1"
-	],
-	"during_print_exhaust_fan_speed": [
-		"80%"
-	],
-	"complete_print_exhaust_fan_speed": [
-		"80%"
-	],
-	"filament_multitool_ramming_flow": [
-		"20"
-	],
-	"filament_retraction_length": [
-		"nil"
-	],
-	"cool_plate_temp": [
-		"60"
-	],
-	"eng_plate_temp": [
-		"60"
-	],
-	"textured_plate_temp": [
-		"60"
-	],
-	"cool_plate_temp_initial_layer": [
-		"55"
-	],
-	"eng_plate_temp_initial_layer": [
-		"55"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	]
+	"additional_cooling_fan_speed": "75%",
+	"activate_air_filtration": "1",
+	"during_print_exhaust_fan_speed": "80%",
+	"complete_print_exhaust_fan_speed": "80%"
 }

resources/profiles/Sovol/filament/Generic TPU @Sovol Zero.json

@@ -1,12 +1,11 @@
 {
 	"type": "filament",
-	"filament_id": "OFgbpcy9",
-	"setting_id": "MlY6WQ41FE8zDPSV",
 	"name": "Generic TPU @Sovol Zero",
+	"inherits": "Generic TPU @System",
 	"renamed_from": "Sovol Zero TPU",
 	"from": "system",
+	"setting_id": "MlY6WQ41FE8zDPSV",
 	"instantiation": "true",
-	"inherits": "fdm_filament_tpu",
 	"filament_flow_ratio": [
 		"0.98"
 	],
@@ -61,55 +60,11 @@
 	"filament_z_hop": [
 		"0.4"
 	],
-	"additional_cooling_fan_speed": [
-		"50"
-	],
-	"activate_air_filtration": [
-		"1"
-	],
-	"during_print_exhaust_fan_speed": [
-		"100"
-	],
-	"complete_print_exhaust_fan_speed": [
-		"50"
-	],
+	"additional_cooling_fan_speed": "50",
+	"activate_air_filtration": "1",
+	"during_print_exhaust_fan_speed": "100",
+	"complete_print_exhaust_fan_speed": "50",
 	"compatible_printers": [
-		"Sovol Zero 0.2 nozzle",
-		"Sovol Zero 0.4 nozzle",
-		"Sovol Zero 0.6 nozzle",
-		"Sovol Zero 0.8 nozzle",
-		"Sovol Zero 1.0 nozzle",
-		"Sovol Zero 0.2 Hardened Steel nozzle",
-		"Sovol Zero 0.4 Hardened Steel nozzle",
-		"Sovol Zero 0.6 Hardened Steel nozzle",
-		"Sovol Zero 0.8 Hardened Steel nozzle",
-		"Sovol Zero 1.0 Hardened Steel nozzle"
-	],
-	"cool_plate_temp": [
-		"60"
-	],
-	"eng_plate_temp": [
-		"60"
-	],
-	"textured_plate_temp": [
-		"60"
-	],
-	"cool_plate_temp_initial_layer": [
-		"55"
-	],
-	"eng_plate_temp_initial_layer": [
-		"55"
-	],
-	"textured_plate_temp_initial_layer": [
-		"55"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	],
-	"filament_retraction_length": [
-		"nil"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
+		"Sovol Zero 0.4 nozzle"
 	]
 }

resources/profiles/Sovol/filament/Sovol Zero PETG HS Nozzle.json

@@ -0,0 +1,77 @@
+{
+	"type": "filament",
+	"name": "Sovol Zero PETG HS Nozzle",
+	"inherits": "Generic PETG @System",
+	"from": "system",
+	"setting_id": "AfxHmpdOkMDJa2fk",
+	"filament_id": "OFymnal9",
+	"instantiation": "true",
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"enable_pressure_advance": "1",
+	"pressure_advance": "0.048",
+	"filament_max_volumetric_speed": [
+		"15"
+	],
+	"nozzle_temperature_initial_layer": [
+		"265"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"nozzle_temperature_range_low": [
+		"230"
+	],
+	"nozzle_temperature_range_high": [
+		"280"
+	],
+	"hot_plate_temp": [
+		"85"
+	],
+	"hot_plate_temp_initial_layer": [
+		"85"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"fan_max_speed": [
+		"40"
+	],
+	"fan_cooling_layer_time": [
+		"50"
+	],
+	"full_fan_speed_layer": [
+		"3"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"overhang_fan_speed": [
+		"70"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"filament_retraction_length": [
+		"0.5"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"activate_air_filtration": "1",
+	"during_print_exhaust_fan_speed": "50",
+	"complete_print_exhaust_fan_speed": "50",
+	"compatible_printers": [
+		"Sovol Zero 0.4 nozzle"
+	]
+}

resources/profiles/Sovol/filament/Sovol Zero PLA Basic HS Nozzle.json

@@ -0,0 +1,70 @@
+{
+	"type": "filament",
+	"name": "Sovol Zero PLA Basic HS Nozzle",
+	"inherits": "Generic PLA @System",
+	"from": "system",
+	"setting_id": "i9wDnSEIrOBPbOZl",
+	"filament_id": "OFzB4uOs",
+	"instantiation": "true",
+	"filament_flow_ratio": [
+		"1.0348"
+	],
+	"filament_max_volumetric_speed": [
+		"21"
+	],
+	"enable_pressure_advance": "1",
+	"pressure_advance": "0.03",
+	"compatible_printers": [
+		"Sovol Zero 0.4 nozzle"
+	],
+	"nozzle_temperature_initial_layer": [
+		"245"
+	],
+	"nozzle_temperature": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"nozzle_temperature_range_high": [
+		"250"
+	],
+	"hot_plate_temp": [
+		"65"
+	],
+	"hot_plate_temp_initial_layer": [
+		"65"
+	],
+	"fan_min_speed": [
+		"70"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_cooling_layer_time": [
+		"80"
+	],
+	"full_fan_speed_layer": [
+		"3"
+	],
+	"slow_down_layer_time": [
+		"5"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"dont_slow_down_outer_wall": "0",
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"additional_cooling_fan_speed": "75%",
+	"activate_air_filtration": "1",
+	"during_print_exhaust_fan_speed": "80%",
+	"complete_print_exhaust_fan_speed": "80%"
+}

resources/profiles/Sovol/filament/Sovol Zero PLA Silk HS Nozzle.json

@@ -0,0 +1,70 @@
+{
+	"type": "filament",
+	"name": "Sovol Zero PLA Silk HS Nozzle",
+	"inherits": "Generic PLA @System",
+	"from": "system",
+	"setting_id": "XxEJBNFLRltR2Xwn",
+	"filament_id": "OFAO9A7J",
+	"instantiation": "true",
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"15"
+	],
+	"enable_pressure_advance": "1",
+	"pressure_advance": "0.027",
+	"compatible_printers": [
+		"Sovol Zero 0.4 nozzle"
+	],
+	"nozzle_temperature_initial_layer": [
+		"245"
+	],
+	"nozzle_temperature": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"nozzle_temperature_range_high": [
+		"250"
+	],
+	"hot_plate_temp": [
+		"65"
+	],
+	"hot_plate_temp_initial_layer": [
+		"65"
+	],
+	"fan_min_speed": [
+		"70"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_cooling_layer_time": [
+		"80"
+	],
+	"full_fan_speed_layer": [
+		"3"
+	],
+	"slow_down_layer_time": [
+		"5"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"dont_slow_down_outer_wall": "0",
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"additional_cooling_fan_speed": "75%",
+	"activate_air_filtration": "1",
+	"during_print_exhaust_fan_speed": "80%",
+	"complete_print_exhaust_fan_speed": "80%"
+}

resources/profiles/Sovol/machine/Sovol Zero 0.2 Hardened Steel nozzle.json

@@ -1,19 +0,0 @@
-{
-	"type": "machine",
-	"name": "Sovol Zero 0.2 Hardened Steel nozzle",
-	"inherits": "Sovol Zero 0.2 nozzle",
-	"from": "system",
-	"setting_id": "OkvEInEyzUUJzw9K",
-	"instantiation": "true",
-	"printer_model": "Sovol Zero",
-	"printer_variant": "0.2HS",
-	"nozzle_diameter": [
-		"0.2"
-	],
-	"default_filament_profile": [
-		"Generic PLA @Sovol Zero Hardened Steel nozzle"
-	],
-	"nozzle_type": [
-		"hardened_steel"
-	]
-}

resources/profiles/Sovol/machine/Sovol Zero 0.4 Hardened Steel nozzle.json

@@ -1,19 +0,0 @@
-{
-	"type": "machine",
-	"name": "Sovol Zero 0.4 Hardened Steel nozzle",
-	"inherits": "Sovol Zero 0.4 nozzle",
-	"from": "system",
-	"setting_id": "RqwHKS8MYRdoeJPi",
-	"instantiation": "true",
-	"printer_model": "Sovol Zero",
-	"printer_variant": "0.4HS",
-	"nozzle_diameter": [
-		"0.4"
-	],
-	"default_filament_profile": [
-		"Generic PLA @Sovol Zero Hardened Steel nozzle"
-	],
-	"nozzle_type": [
-		"hardened_steel"
-	]
-}

resources/profiles/Sovol/machine/Sovol Zero 0.6 Hardened Steel nozzle.json

@@ -1,19 +0,0 @@
-{
-	"type": "machine",
-	"name": "Sovol Zero 0.6 Hardened Steel nozzle",
-	"inherits": "Sovol Zero 0.6 nozzle",
-	"from": "system",
-	"setting_id": "s3N3FJkWrzOylFm8",
-	"instantiation": "true",
-	"printer_model": "Sovol Zero",
-	"printer_variant": "0.6HS",
-	"nozzle_diameter": [
-		"0.6"
-	],
-	"default_filament_profile": [
-		"Generic PLA @Sovol Zero Hardened Steel nozzle"
-	],
-	"nozzle_type": [
-		"hardened_steel"
-	]
-}

resources/profiles/Sovol/machine/Sovol Zero 0.8 Hardened Steel nozzle.json

@@ -1,19 +0,0 @@
-{
-	"type": "machine",
-	"name": "Sovol Zero 0.8 Hardened Steel nozzle",
-	"inherits": "Sovol Zero 0.8 nozzle",
-	"from": "system",
-	"setting_id": "houacf8sQ3bLozqD",
-	"instantiation": "true",
-	"printer_model": "Sovol Zero",
-	"printer_variant": "0.8HS",
-	"nozzle_diameter": [
-		"0.8"
-	],
-	"default_filament_profile": [
-		"Generic PLA @Sovol Zero Hardened Steel nozzle"
-	],
-	"nozzle_type": [
-		"hardened_steel"
-	]
-}

resources/profiles/Sovol/machine/Sovol Zero 1.0 Hardened Steel nozzle.json

@@ -1,19 +0,0 @@
-{
-	"type": "machine",
-	"name": "Sovol Zero 1.0 Hardened Steel nozzle",
-	"inherits": "Sovol Zero 1.0 nozzle",
-	"from": "system",
-	"setting_id": "sqlEiL0in8LSjmmn",
-	"instantiation": "true",
-	"printer_model": "Sovol Zero",
-	"printer_variant": "1.0HS",
-	"nozzle_diameter": [
-		"1.0"
-	],
-	"default_filament_profile": [
-		"Generic PLA @Sovol Zero Hardened Steel nozzle"
-	],
-	"nozzle_type": [
-		"hardened_steel"
-	]
-}

resources/profiles/Sovol/machine/Sovol Zero.json

@@ -2,11 +2,11 @@
 	"type": "machine_model",
 	"name": "Sovol Zero",
 	"model_id": "Sovol-Zero",
-	"nozzle_diameter": "0.2;0.4;0.6;0.8;1.0;0.2HS;0.4HS;0.6HS;0.8HS;1.0HS",
+	"nozzle_diameter": "0.4",
 	"machine_tech": "FFF",
 	"family": "Sovol",
 	"bed_model": "sovol_zero_buildplate_model.stl",
 	"bed_texture": "sovol_zero_buildplate_texture.svg",
 	"hotend_model": "",
-	"default_materials": "Generic PLA @Sovol Zero;Generic PLA SPEEDBENCHY @Sovol Zero;Generic PLA @Sovol Zero Hardened Steel nozzle;Generic PLA Silk @Sovol Zero;Generic PLA Silk @Sovol Zero Hardened Steel nozzle;Generic ABS @Sovol Zero;Generic PETG @Sovol Zero;Generic PETG @Sovol Zero Hardened Steel nozzle;Generic TPU @Sovol Zero;Generic PC @Sovol Zero"
+	"default_materials": "Generic PLA @Sovol Zero;Sovol Zero PLA Basic HS Nozzle;Generic PLA Silk @Sovol Zero;Sovol Zero PLA Silk HS Nozzle;Generic ABS @Sovol Zero;Generic PETG @Sovol Zero;Sovol Zero PETG HS Nozzle;Generic TPU @Sovol Zero;Generic PC @Sovol Zero"
 }

resources/profiles/Sovol/process/0.06mm Quality @Sovol Zero 0.2 nozzle.json

@@ -1,36 +0,0 @@
-{
-	"type": "process",
-	"name": "0.06mm Quality @Sovol Zero 0.2 nozzle",
-	"inherits": "fdm_process_zero",
-	"from": "system",
-	"setting_id": "fWP7jaL7sJmmZ6QN",
-	"instantiation": "true",
-	"layer_height": "0.06",
-	"bottom_shell_layers": "8",
-	"bottom_shell_thickness": "0.8",
-	"bridge_speed": "30",
-	"outer_wall_acceleration": "10000",
-	"top_surface_acceleration": "5000",
-	"outer_wall_line_width": "0.21",
-	"line_width": "0.21",
-	"sparse_infill_density": "15%",
-	"inner_wall_acceleration": "12000",
-	"initial_layer_print_height": "0.06",
-	"initial_layer_line_width": "0.3",
-	"infill_wall_overlap": "18",
-	"inner_wall_line_width": "0.22",
-	"wall_loops": "3",
-	"internal_solid_infill_line_width": "0.21",
-	"sparse_infill_line_width": "0.21",
-	"support_top_z_distance": "0.10",
-	"support_line_width": "0.21",
-	"tree_support_tip_diameter": "0.21",
-	"support_speed": "100",
-	"top_surface_line_width": "0.21",
-	"top_shell_layers": "8",
-	"top_shell_thickness": "1",
-	"compatible_printers": [
-		"Sovol Zero 0.2 nozzle",
-		"Sovol Zero 0.2 Hardened Steel nozzle"
-	]
-}

resources/profiles/Sovol/process/0.10mm Standard @Sovol Zero 0.2 nozzle.json

@@ -1,36 +0,0 @@
-{
-	"type": "process",
-	"name": "0.10mm Standard @Sovol Zero 0.2 nozzle",
-	"inherits": "fdm_process_zero",
-	"from": "system",
-	"setting_id": "Gql3487jsaTXyuYZ",
-	"instantiation": "true",
-	"layer_height": "0.10",
-	"bottom_shell_layers": "4",
-	"bottom_shell_thickness": "0.8",
-	"bridge_speed": "50",
-	"outer_wall_acceleration": "10000",
-	"top_surface_acceleration": "5000",
-	"outer_wall_line_width": "0.22",
-	"line_width": "0.22",
-	"sparse_infill_density": "15%",
-	"inner_wall_acceleration": "12000",
-	"initial_layer_print_height": "0.12",
-	"initial_layer_line_width": "0.3",
-	"infill_wall_overlap": "20",
-	"inner_wall_line_width": "0.22",
-	"wall_loops": "2",
-	"internal_solid_infill_line_width": "0.22",
-	"sparse_infill_line_width": "0.22",
-	"support_top_z_distance": "0.20",
-	"support_line_width": "0.22",
-	"tree_support_tip_diameter": "0.22",
-	"support_speed": "100",
-	"top_surface_line_width": "0.22",
-	"top_shell_layers": "4",
-	"top_shell_thickness": "1",
-	"compatible_printers": [
-		"Sovol Zero 0.2 nozzle",
-		"Sovol Zero 0.2 Hardened Steel nozzle"
-	]
-}

resources/profiles/Sovol/process/0.12mm Quality @Sovol Zero 0.4 nozzle.json

@@ -1,35 +0,0 @@
-{
-	"type": "process",
-	"setting_id": "CaEopiv2Wg6pQJjH",
-	"name": "0.12mm Quality @Sovol Zero 0.4 nozzle",
-	"from": "system",
-	"inherits": "fdm_process_zero",
-	"instantiation": "true",
-	"layer_height": "0.12",
-	"bottom_shell_layers": "8",
-	"bottom_shell_thickness": "0.8",
-	"bridge_speed": "30",
-	"outer_wall_acceleration": "10000",
-	"top_surface_acceleration": "5000",
-	"outer_wall_line_width": "0.42",
-	"line_width": "0.42",
-	"sparse_infill_density": "15%",
-	"inner_wall_acceleration": "12000",
-	"initial_layer_print_height": "0.12",
-	"initial_layer_line_width": "0.6",
-	"sparse_infill_line_width": "0.42",
-	"infill_wall_overlap": "18",
-	"inner_wall_line_width": "0.44",
-	"wall_loops": "3",
-	"support_top_z_distance": "0.10",
-	"support_line_width": "0.42",
-	"tree_support_tip_diameter": "0.42",
-	"support_speed": "100",
-	"top_surface_line_width": "0.42",
-	"internal_solid_infill_line_width": "0.42",
-	"top_shell_layers": "8",
-	"compatible_printers": [
-		"Sovol Zero 0.4 nozzle",
-		"Sovol Zero 0.4 Hardened Steel nozzle"
-	]
-}

resources/profiles/Sovol/process/0.14mm Fast @Sovol Zero 0.2 nozzle.json

@@ -1,36 +0,0 @@
-{
-	"type": "process",
-	"name": "0.14mm Fast @Sovol Zero 0.2 nozzle",
-	"inherits": "fdm_process_zero",
-	"from": "system",
-	"setting_id": "I9yoyCcGGTRrDoKu",
-	"instantiation": "true",
-	"layer_height": "0.14",
-	"bottom_shell_layers": "3",
-	"bottom_shell_thickness": "0",
-	"bridge_speed": "60",
-	"outer_wall_acceleration": "22000",
-	"top_surface_acceleration": "22000",
-	"outer_wall_line_width": "0.24",
-	"line_width": "0.24",
-	"sparse_infill_density": "10%",
-	"inner_wall_acceleration": "28000",
-	"initial_layer_print_height": "0.14",
-	"initial_layer_line_width": "0.3",
-	"infill_wall_overlap": "20",
-	"inner_wall_line_width": "0.24",
-	"wall_loops": "2",
-	"internal_solid_infill_line_width": "0.24",
-	"sparse_infill_line_width": "0.24",
-	"support_top_z_distance": "0.30",
-	"support_line_width": "0.24",
-	"tree_support_tip_diameter": "0.24",
-	"support_speed": "120",
-	"top_surface_line_width": "0.24",
-	"top_shell_layers": "4",
-	"top_shell_thickness": "1",
-	"compatible_printers": [
-		"Sovol Zero 0.2 nozzle",
-		"Sovol Zero 0.2 Hardened Steel nozzle"
-	]
-}

resources/profiles/Sovol/process/0.15mm Quality @Sovol Zero 0.6 nozzle.json

@@ -1,34 +0,0 @@
-{
-	"type": "process",
-	"setting_id": "IfDpa3vM99D4ytny",
-	"name": "0.15mm Quality @Sovol Zero 0.6 nozzle",
-	"from": "system",
-	"inherits": "fdm_process_zero",
-	"instantiation": "true",
-	"layer_height": "0.15",
-	"bottom_shell_layers": "5",
-	"bottom_shell_thickness": "0.8",
-	"bridge_speed": "30",
-	"outer_wall_acceleration": "10000",
-	"top_surface_acceleration": "5000",
-	"outer_wall_line_width": "0.63",
-	"line_width": "0.63",
-	"sparse_infill_density": "15%",
-	"inner_wall_acceleration": "12000",
-	"initial_layer_line_width": "0.9",
-	"sparse_infill_line_width": "0.63",
-	"infill_wall_overlap": "18",
-	"inner_wall_line_width": "0.66",
-	"wall_loops": "3",
-	"support_top_z_distance": "0.15",
-	"support_line_width": "0.63",
-	"tree_support_tip_diameter": "0.63",
-	"support_speed": "100",
-	"top_surface_line_width": "0.63",
-	"top_shell_layers": "5",
-	"internal_solid_infill_line_width": "0.63",
-	"compatible_printers": [
-		"Sovol Zero 0.6 nozzle",
-		"Sovol Zero 0.6 Hardened Steel nozzle"
-	]
-}

resources/profiles/Sovol/process/0.20mm Quality @Sovol Zero 0.8 nozzle.json

@@ -1,42 +0,0 @@
-{
-	"type": "process",
-	"name": "0.20mm Quality @Sovol Zero 0.8 nozzle",
-	"inherits": "fdm_process_zero",
-	"from": "system",
-	"setting_id": "MSxikpQZNYdoBynZ",
-	"instantiation": "true",
-	"layer_height": "0.20",
-	"bottom_shell_layers": "4",
-	"bottom_shell_thickness": "0.8",
-	"bridge_speed": "30",
-	"outer_wall_acceleration": "10000",
-	"top_surface_acceleration": "5000",
-	"outer_wall_line_width": "0.84",
-	"line_width": "0.84",
-	"sparse_infill_density": "15%",
-	"inner_wall_acceleration": "12000",
-	"initial_layer_print_height": "0.36",
-	"initial_layer_line_width": "1.2",
-	"sparse_infill_line_width": "0.84",
-	"infill_wall_overlap": "18",
-	"inner_wall_line_width": "0.88",
-	"wall_loops": "3",
-	"support_top_z_distance": "0.20",
-	"support_line_width": "0.84",
-	"tree_support_tip_diameter": "0.84",
-	"support_speed": "100",
-	"top_surface_line_width": "0.84",
-	"top_shell_layers": "4",
-	"outer_wall_speed": "350",
-	"inner_wall_speed": "400",
-	"small_perimeter_speed": "50%",
-	"internal_solid_infill_speed": "200",
-	"internal_solid_infill_line_width": "0.84",
-	"top_surface_speed": "200",
-	"gap_infill_speed": "200",
-	"sparse_infill_speed": "500",
-	"compatible_printers": [
-		"Sovol Zero 0.8 nozzle",
-		"Sovol Zero 0.8 Hardened Steel nozzle"
-	]
-}

resources/profiles/Sovol/process/0.20mm Standard @Sovol Zero 0.4 nozzle.json

@@ -1,36 +1,141 @@
 {
 	"type": "process",
-	"setting_id": "ShJTVnJ492No1j2j",
 	"name": "0.20mm Standard @Sovol Zero 0.4 nozzle",
+	"inherits": "fdm_process_common",
 	"from": "system",
-	"inherits": "fdm_process_zero",
+	"setting_id": "ShJTVnJ492No1j2j",
 	"instantiation": "true",
+	"reduce_crossing_wall": "1",
+	"max_travel_detour_distance": "100%",
 	"layer_height": "0.20",
-	"bottom_shell_layers": "4",
-	"bottom_shell_thickness": "0.8",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "1.2",
+	"internal_bridge_flow": "1.2",
 	"bridge_speed": "50",
+	"internal_bridge_speed": "200",
+	"brim_type": "auto_brim",
+	"brim_width": "5",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "40000",
 	"outer_wall_acceleration": "10000",
 	"top_surface_acceleration": "5000",
-	"outer_wall_line_width": "0.44",
-	"line_width": "0.44",
-	"sparse_infill_density": "15%",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"exclude_object": "1",
+	"outer_wall_line_width": "0.4",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.4",
+	"infill_direction": "45",
+	"sparse_infill_density": "10%",
+	"sparse_infill_pattern": "grid",
+	"internal_solid_infill_acceleration": "50%",
+	"initial_layer_acceleration": "1000",
+	"initial_solid_infill_acceleration": "3000",
+	"travel_acceleration": "40000",
 	"inner_wall_acceleration": "12000",
-	"initial_layer_print_height": "0.24",
-	"initial_layer_line_width": "0.6",
-	"sparse_infill_line_width": "0.44",
-	"infill_wall_overlap": "20",
-	"ironing_speed": "100",
-	"inner_wall_line_width": "0.44",
+	"outer_wall_jerk": "5",
+	"inner_wall_jerk": "5",
+	"infill_jerk": "5",
+	"top_surface_jerk": "5",
+	"initial_layer_jerk": "5",
+	"travel_jerk": "5",
+	"initial_layer_line_width": "0.42",
+	"initial_layer_print_height": "0.25",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "15%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.25",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{printer_model}_{input_filename_base}_{filament_type[0]}_{layer_height}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "50",
+	"overhang_3_4_speed": "30",
+	"overhang_4_4_speed": "20",
+	"inner_wall_line_width": "0.4",
 	"wall_loops": "2",
-	"support_top_z_distance": "0.20",
-	"support_line_width": "0.44",
-	"tree_support_tip_diameter": "0.44",
-	"support_speed": "60",
-	"top_surface_line_width": "0.44",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "0.8",
+	"skirt_height": "1",
+	"skirt_loops": "1",
+	"minimum_sparse_infill_area": "15",
+	"internal_solid_infill_line_width": "0.45",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "tree(auto)",
+	"support_style": "default",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.235",
+	"support_bottom_z_distance": "0.235",
+	"support_filament": "0",
+	"support_line_width": "0.45",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "5",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_bottom_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_interface_pattern": "grid",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "3.5",
+	"support_speed": "100",
+	"support_threshold_angle": "20",
+	"support_object_xy_distance": "0.35",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonic",
+	"top_surface_line_width": "0.38",
 	"top_shell_layers": "4",
-	"internal_solid_infill_line_width": "0.44",
+	"top_shell_thickness": "1",
+	"initial_layer_speed": "55",
+	"initial_layer_infill_speed": "105",
+	"initial_layer_travel_speed": "60%",
+	"outer_wall_speed": "350",
+	"inner_wall_speed": "400",
+	"small_perimeter_speed": "50%",
+	"internal_solid_infill_speed": "200",
+	"top_surface_speed": "200",
+	"gap_infill_speed": "200",
+	"sparse_infill_speed": "500",
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "25%",
+	"travel_speed": "1000",
+	"enable_prime_tower": "1",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"bridge_acceleration": "50%",
+	"seam_gap": "10%",
+	"precise_outer_wall": "1",
+	"wall_generator": "classic",
+	"gcode_label_objects": "1",
+	"slow_down_layers": "3",
+	"top_solid_infill_flow_ratio": "0.9",
+	"only_one_wall_top": "1",
+	"wall_loop_direction": "clockwise",
+	"top_bottom_infill_wall_overlap": "25%",
+	"filter_out_gap_fill": "0",
+	"detect_narrow_internal_solid_infill": "1",
+	"thick_bridges": "1",
+	"bridge_angle": "0",
 	"compatible_printers": [
-		"Sovol Zero 0.4 nozzle",
-		"Sovol Zero 0.4 Hardened Steel nozzle"
+		"Sovol Zero 0.4 nozzle"
 	]
 }

resources/profiles/Sovol/process/0.25mm Quality @Sovol Zero 1.0 nozzle.json

@@ -1,79 +0,0 @@
-{
-	"type": "process",
-	"name": "0.25mm Quality @Sovol Zero 1.0 nozzle",
-	"inherits": "fdm_process_zero",
-	"from": "system",
-	"setting_id": "JUmnFOoEMJrbWCN9",
-	"instantiation": "true",
-	"layer_height": "0.25",
-	"bottom_shell_layers": "4",
-	"bottom_shell_thickness": "0.8",
-	"bridge_speed": "30",
-	"internal_bridge_speed": "200",
-	"default_acceleration": "40000",
-	"outer_wall_acceleration": "10000",
-	"top_surface_acceleration": "5000",
-	"outer_wall_line_width": "1.05",
-	"line_width": "1.05",
-	"sparse_infill_density": "15%",
-	"inner_wall_acceleration": "12000",
-	"initial_layer_print_height": "0.45",
-	"initial_layer_line_width": "1.5",
-	"infill_combination": "0",
-	"sparse_infill_line_width": "1.05",
-	"infill_wall_overlap": "18",
-	"interface_shells": "0",
-	"ironing_flow": "15%",
-	"ironing_spacing": "0.25",
-	"ironing_speed": "15",
-	"ironing_type": "no ironing",
-	"filename_format": "{input_filename_base}_{nozzle_diameter[0]}n_{filament_type[0]}_{layer_height}_{print_time}.gcode",
-	"detect_overhang_wall": "1",
-	"overhang_1_4_speed": "0",
-	"overhang_2_4_speed": "50",
-	"overhang_3_4_speed": "30",
-	"overhang_4_4_speed": "20",
-	"inner_wall_line_width": "1.1",
-	"wall_loops": "3",
-	"print_settings_id": "",
-	"raft_layers": "0",
-	"seam_position": "aligned",
-	"skirt_distance": "0.8",
-	"skirt_height": "1",
-	"skirt_loops": "1",
-	"minimum_sparse_infill_area": "15",
-	"internal_solid_infill_line_width": "1.05",
-	"spiral_mode": "0",
-	"standby_temperature_delta": "-5",
-	"enable_support": "0",
-	"resolution": "0.012",
-	"support_type": "tree(auto)",
-	"support_style": "snug",
-	"support_on_build_plate_only": "0",
-	"support_top_z_distance": "0.25",
-	"support_bottom_z_distance": "0.235",
-	"support_filament": "0",
-	"support_line_width": "1.05",
-	"tree_support_tip_diameter": "1.05",
-	"support_interface_loop_pattern": "0",
-	"support_interface_filament": "0",
-	"support_interface_top_layers": "5",
-	"support_interface_bottom_layers": "-1",
-	"support_interface_spacing": "0.2",
-	"support_bottom_interface_spacing": "0.2",
-	"support_interface_speed": "100%",
-	"support_interface_pattern": "grid",
-	"support_base_pattern": "rectilinear",
-	"support_base_pattern_spacing": "3.5",
-	"support_speed": "100",
-	"support_threshold_angle": "50",
-	"support_object_xy_distance": "0.35",
-	"tree_support_branch_angle": "40",
-	"top_surface_line_width": "1.05",
-	"top_shell_layers": "4",
-	"top_shell_thickness": "1",
-	"compatible_printers": [
-		"Sovol Zero 1.0 nozzle",
-		"Sovol Zero 1.0 Hardened Steel nozzle"
-	]
-}

resources/profiles/Sovol/process/0.25mm SPEEDBENCHY @Sovol Zero 0.4 nozzle.json

@@ -1,85 +0,0 @@
-{
-	"type": "process",
-	"setting_id": "oFrWcSxmad1b6sD4",
-	"name": "0.25mm SPEEDBENCHY @Sovol Zero 0.4 nozzle",
-	"from": "system",
-	"inherits": "fdm_process_zero",
-	"instantiation": "true",
-	"layer_height": "0.25",
-	"initial_layer_print_height": "0.25",
-	"line_width": "0.5",
-	"initial_layer_line_width": "0.5",
-	"outer_wall_line_width": "0.5",
-	"inner_wall_line_width": "0.5",
-	"top_surface_line_width": "0.55",
-	"internal_solid_infill_line_width": "0.55",
-	"sparse_infill_line_width": "0.55",
-	"support_line_width": "0.5",
-	"tree_support_tip_diameter": "0.5",
-	"wall_loops": "2",
-	"top_shell_layers": "3",
-	"bottom_shell_layers": "3",
-	"bottom_shell_thickness": "0",
-	"sparse_infill_density": "10%",
-	"sparse_infill_pattern": "grid",
-	"bottom_solid_infill_flow_ratio": "1.2",
-	"top_solid_infill_flow_ratio": "1.4",
-	"bridge_flow": "1",
-	"internal_bridge_flow": "1",
-	"bridge_speed": "250",
-	"internal_bridge_speed": "250",
-	"bridge_acceleration": "100%",
-	"thick_bridges": "0",
-	"thick_internal_bridges": "0",
-	"brim_type": "outer_only",
-	"brim_width": "1",
-	"brim_object_gap": "0",
-	"filter_out_gap_fill": "13",
-	"gap_fill_target": "nowhere",
-	"min_width_top_surface": "200%",
-	"minimum_sparse_infill_area": "0",
-	"infill_direction": "0",
-	"solid_infill_direction": "0",
-	"infill_wall_overlap": "15%",
-	"reduce_crossing_wall": "0",
-	"skirt_loops": "0",
-	"only_one_wall_top": "1",
-	"slow_down_layers": "1",
-	"wall_direction": "cw",
-	"initial_layer_speed": "300",
-	"initial_layer_infill_speed": "300",
-	"initial_layer_travel_speed": "100%",
-	"outer_wall_speed": "350",
-	"inner_wall_speed": "400",
-	"small_perimeter_speed": "100%",
-	"internal_solid_infill_speed": "400",
-	"top_surface_speed": "300",
-	"gap_infill_speed": "350",
-	"sparse_infill_speed": "500",
-	"support_speed": "100",
-	"travel_speed": "1200",
-	"default_acceleration": "40000",
-	"initial_layer_acceleration": "20000",
-	"outer_wall_acceleration": "40000",
-	"inner_wall_acceleration": "40000",
-	"top_surface_acceleration": "20000",
-	"internal_solid_infill_acceleration": "100%",
-	"travel_acceleration": "40000",
-	"accel_to_decel_factor": "50%",
-	"outer_wall_jerk": "20",
-	"inner_wall_jerk": "20",
-	"infill_jerk": "20",
-	"top_surface_jerk": "20",
-	"initial_layer_jerk": "20",
-	"travel_jerk": "20",
-	"overhang_1_4_speed": "160",
-	"overhang_2_4_speed": "100",
-	"overhang_3_4_speed": "60",
-	"overhang_4_4_speed": "40",
-	"support_top_z_distance": "0.235",
-	"support_bottom_z_distance": "0.235",
-	"compatible_printers": [
-		"Sovol Zero 0.4 nozzle",
-		"Sovol Zero 0.4 Hardened Steel nozzle"
-	]
-}

resources/profiles/Sovol/process/0.28mm Fast @Sovol Zero 0.4 nozzle.json

@@ -1,39 +0,0 @@
-{
-	"type": "process",
-	"name": "0.28mm Fast @Sovol Zero 0.4 nozzle",
-	"inherits": "fdm_process_zero",
-	"from": "system",
-	"setting_id": "1VoML2LGDk4TJgLI",
-	"instantiation": "true",
-	"layer_height": "0.28",
-	"bottom_shell_layers": "3",
-	"bottom_shell_thickness": "0",
-	"bridge_speed": "60",
-	"outer_wall_acceleration": "22000",
-	"top_surface_acceleration": "22000",
-	"outer_wall_line_width": "0.48",
-	"line_width": "0.48",
-	"sparse_infill_density": "10%",
-	"inner_wall_acceleration": "28000",
-	"initial_layer_print_height": "0.28",
-	"initial_layer_line_width": "0.6",
-	"sparse_infill_line_width": "0.48",
-	"inner_wall_line_width": "0.48",
-	"internal_solid_infill_line_width": "0.48",
-	"support_top_z_distance": "0.30",
-	"support_line_width": "0.48",
-	"tree_support_tip_diameter": "0.48",
-	"support_speed": "120",
-	"top_surface_line_width": "0.48",
-	"outer_wall_speed": "350",
-	"inner_wall_speed": "400",
-	"small_perimeter_speed": "50%",
-	"internal_solid_infill_speed": "200",
-	"top_surface_speed": "200",
-	"gap_infill_speed": "200",
-	"sparse_infill_speed": "500",
-	"compatible_printers": [
-		"Sovol Zero 0.4 nozzle",
-		"Sovol Zero 0.4 Hardened Steel nozzle"
-	]
-}

resources/profiles/Sovol/process/0.30mm Standard @Sovol Zero 0.6 nozzle.json

@@ -1,35 +0,0 @@
-{
-	"type": "process",
-	"setting_id": "lTAs2USEP8D749K7",
-	"name": "0.30mm Standard @Sovol Zero 0.6 nozzle",
-	"from": "system",
-	"inherits": "fdm_process_zero",
-	"instantiation": "true",
-	"layer_height": "0.30",
-	"bottom_shell_layers": "4",
-	"bottom_shell_thickness": "0.8",
-	"bridge_speed": "50",
-	"outer_wall_acceleration": "10000",
-	"top_surface_acceleration": "5000",
-	"outer_wall_line_width": "0.66",
-	"line_width": "0.66",
-	"sparse_infill_density": "15%",
-	"inner_wall_acceleration": "12000",
-	"initial_layer_print_height": "0.36",
-	"initial_layer_line_width": "0.9",
-	"sparse_infill_line_width": "0.66",
-	"infill_wall_overlap": "20",
-	"inner_wall_line_width": "0.66",
-	"wall_loops": "2",
-	"support_top_z_distance": "0.30",
-	"support_line_width": "0.66",
-	"tree_support_tip_diameter": "0.66",
-	"support_speed": "100",
-	"top_surface_line_width": "0.66",
-	"top_shell_layers": "4",
-	"internal_solid_infill_line_width": "0.66",
-	"compatible_printers": [
-		"Sovol Zero 0.6 nozzle",
-		"Sovol Zero 0.6 Hardened Steel nozzle"
-	]
-}

resources/profiles/Sovol/process/0.40mm Standard @Sovol Zero 0.8 nozzle.json

@@ -1,42 +0,0 @@
-{
-	"type": "process",
-	"name": "0.40mm Standard @Sovol Zero 0.8 nozzle",
-	"inherits": "fdm_process_zero",
-	"from": "system",
-	"setting_id": "8x4CsuqroC9HOdAN",
-	"instantiation": "true",
-	"layer_height": "0.40",
-	"bottom_shell_layers": "4",
-	"bottom_shell_thickness": "0.8",
-	"bridge_speed": "50",
-	"outer_wall_acceleration": "10000",
-	"top_surface_acceleration": "5000",
-	"outer_wall_line_width": "0.88",
-	"line_width": "0.88",
-	"sparse_infill_density": "15%",
-	"inner_wall_acceleration": "12000",
-	"initial_layer_print_height": "0.48",
-	"initial_layer_line_width": "1.2",
-	"sparse_infill_line_width": "0.88",
-	"infill_wall_overlap": "20",
-	"inner_wall_line_width": "0.88",
-	"wall_loops": "2",
-	"support_top_z_distance": "0.40",
-	"support_line_width": "0.88",
-	"tree_support_tip_diameter": "0.88",
-	"support_speed": "100",
-	"top_surface_line_width": "0.88",
-	"top_shell_layers": "4",
-	"outer_wall_speed": "350",
-	"inner_wall_speed": "400",
-	"small_perimeter_speed": "50%",
-	"internal_solid_infill_speed": "200",
-	"top_surface_speed": "200",
-	"gap_infill_speed": "200",
-	"sparse_infill_speed": "500",
-	"internal_solid_infill_line_width": "0.88",
-	"compatible_printers": [
-		"Sovol Zero 0.8 nozzle",
-		"Sovol Zero 0.8 Hardened Steel nozzle"
-	]
-}

resources/profiles/Sovol/process/0.42mm Fast @Sovol Zero 0.6 nozzle.json

@@ -1,39 +0,0 @@
-{
-	"type": "process",
-	"name": "0.42mm Fast @Sovol Zero 0.6 nozzle",
-	"inherits": "fdm_process_zero",
-	"from": "system",
-	"setting_id": "illqJAnGiA2pY0hw",
-	"instantiation": "true",
-	"layer_height": "0.42",
-	"bottom_shell_layers": "3",
-	"bottom_shell_thickness": "0",
-	"bridge_speed": "60",
-	"outer_wall_acceleration": "22000",
-	"top_surface_acceleration": "22000",
-	"outer_wall_line_width": "0.72",
-	"line_width": "0.72",
-	"sparse_infill_density": "10%",
-	"inner_wall_acceleration": "28000",
-	"initial_layer_print_height": "0.42",
-	"initial_layer_line_width": "0.9",
-	"sparse_infill_line_width": "0.72",
-	"inner_wall_line_width": "0.72",
-	"internal_solid_infill_line_width": "0.72",
-	"support_top_z_distance": "0.45",
-	"support_line_width": "0.72",
-	"tree_support_tip_diameter": "0.72",
-	"support_speed": "120",
-	"top_surface_line_width": "0.72",
-	"outer_wall_speed": "350",
-	"inner_wall_speed": "400",
-	"small_perimeter_speed": "50%",
-	"internal_solid_infill_speed": "200",
-	"top_surface_speed": "200",
-	"gap_infill_speed": "200",
-	"sparse_infill_speed": "500",
-	"compatible_printers": [
-		"Sovol Zero 0.6 nozzle",
-		"Sovol Zero 0.6 Hardened Steel nozzle"
-	]
-}

resources/profiles/Sovol/process/0.50mm Standard @Sovol Zero 1.0 nozzle.json

@@ -1,87 +0,0 @@
-{
-	"type": "process",
-	"name": "0.50mm Standard @Sovol Zero 1.0 nozzle",
-	"inherits": "fdm_process_zero",
-	"from": "system",
-	"setting_id": "E5K55O4RkMyYCAlt",
-	"instantiation": "true",
-	"layer_height": "0.50",
-	"bottom_shell_layers": "4",
-	"bottom_shell_thickness": "0.8",
-	"bridge_speed": "45",
-	"internal_bridge_speed": "200",
-	"default_acceleration": "22000",
-	"outer_wall_acceleration": "16000",
-	"top_surface_acceleration": "16000",
-	"outer_wall_line_width": "1.1",
-	"line_width": "1.1",
-	"sparse_infill_density": "15%",
-	"inner_wall_acceleration": "22000",
-	"initial_layer_print_height": "0.60",
-	"initial_layer_line_width": "1.5",
-	"infill_combination": "0",
-	"sparse_infill_line_width": "1.1",
-	"infill_wall_overlap": "20",
-	"interface_shells": "0",
-	"ironing_flow": "15%",
-	"ironing_spacing": "0.25",
-	"ironing_speed": "15",
-	"ironing_type": "no ironing",
-	"filename_format": "{input_filename_base}_{nozzle_diameter[0]}n_{filament_type[0]}_{layer_height}_{print_time}.gcode",
-	"detect_overhang_wall": "1",
-	"overhang_1_4_speed": "0",
-	"overhang_2_4_speed": "50",
-	"overhang_3_4_speed": "30",
-	"overhang_4_4_speed": "20",
-	"inner_wall_line_width": "1.1",
-	"wall_loops": "2",
-	"print_settings_id": "",
-	"raft_layers": "0",
-	"seam_position": "aligned",
-	"skirt_distance": "0.8",
-	"skirt_height": "1",
-	"skirt_loops": "1",
-	"minimum_sparse_infill_area": "15",
-	"internal_solid_infill_line_width": "1.1",
-	"spiral_mode": "0",
-	"standby_temperature_delta": "-5",
-	"enable_support": "0",
-	"resolution": "0.012",
-	"support_type": "tree(auto)",
-	"support_style": "snug",
-	"support_on_build_plate_only": "0",
-	"support_top_z_distance": "0.50",
-	"support_bottom_z_distance": "0.235",
-	"support_filament": "0",
-	"support_line_width": "1.1",
-	"tree_support_tip_diameter": "1.1",
-	"support_interface_loop_pattern": "0",
-	"support_interface_filament": "0",
-	"support_interface_top_layers": "5",
-	"support_interface_bottom_layers": "-1",
-	"support_interface_spacing": "0.2",
-	"support_bottom_interface_spacing": "0.2",
-	"support_interface_speed": "100%",
-	"support_interface_pattern": "grid",
-	"support_base_pattern": "rectilinear",
-	"support_base_pattern_spacing": "3.5",
-	"support_speed": "60",
-	"support_threshold_angle": "50",
-	"support_object_xy_distance": "0.35",
-	"tree_support_branch_angle": "40",
-	"top_surface_line_width": "1.1",
-	"top_shell_layers": "4",
-	"top_shell_thickness": "1",
-	"outer_wall_speed": "30",
-	"inner_wall_speed": "45",
-	"small_perimeter_speed": "45",
-	"internal_solid_infill_speed": "45",
-	"top_surface_speed": "35",
-	"gap_infill_speed": "35",
-	"sparse_infill_speed": "70",
-	"travel_acceleration": "38000",
-	"compatible_printers": [
-		"Sovol Zero 1.0 nozzle",
-		"Sovol Zero 1.0 Hardened Steel nozzle"
-	]
-}

resources/profiles/Sovol/process/0.56mm Fast @Sovol Zero 0.8 nozzle.json

@@ -1,40 +0,0 @@
-{
-	"type": "process",
-	"name": "0.56mm Fast @Sovol Zero 0.8 nozzle",
-	"inherits": "fdm_process_zero",
-	"from": "system",
-	"setting_id": "g9PPRM4FLMwjMUfy",
-	"instantiation": "true",
-	"layer_height": "0.56",
-	"bottom_shell_layers": "3",
-	"bottom_shell_thickness": "0",
-	"bridge_speed": "60",
-	"default_acceleration": "28000",
-	"outer_wall_acceleration": "22000",
-	"top_surface_acceleration": "22000",
-	"outer_wall_line_width": "0.96",
-	"line_width": "0.96",
-	"sparse_infill_density": "10%",
-	"inner_wall_acceleration": "28000",
-	"initial_layer_print_height": "0.56",
-	"initial_layer_line_width": "1.2",
-	"sparse_infill_line_width": "0.96",
-	"inner_wall_line_width": "0.96",
-	"internal_solid_infill_line_width": "0.96",
-	"support_top_z_distance": "0.60",
-	"support_line_width": "0.96",
-	"tree_support_tip_diameter": "0.96",
-	"top_surface_line_width": "0.96",
-	"top_shell_layers": "4",
-	"outer_wall_speed": "35",
-	"inner_wall_speed": "55",
-	"small_perimeter_speed": "60",
-	"internal_solid_infill_speed": "55",
-	"top_surface_speed": "40",
-	"gap_infill_speed": "40",
-	"sparse_infill_speed": "80",
-	"compatible_printers": [
-		"Sovol Zero 0.8 nozzle",
-		"Sovol Zero 0.8 Hardened Steel nozzle"
-	]
-}

resources/profiles/Sovol/process/0.70mm Fast @Sovol Zero 1.0 nozzle.json

@@ -1,33 +0,0 @@
-{
-	"type": "process",
-	"name": "0.70mm Fast @Sovol Zero 1.0 nozzle",
-	"inherits": "fdm_process_zero",
-	"from": "system",
-	"setting_id": "fW5KJBVndgQE868q",
-	"instantiation": "true",
-	"layer_height": "0.70",
-	"bottom_shell_layers": "3",
-	"bottom_shell_thickness": "0",
-	"bridge_speed": "60",
-	"outer_wall_acceleration": "22000",
-	"top_surface_acceleration": "22000",
-	"outer_wall_line_width": "1.2",
-	"line_width": "1.2",
-	"sparse_infill_density": "10%",
-	"inner_wall_acceleration": "28000",
-	"initial_layer_print_height": "0.70",
-	"initial_layer_line_width": "1.5",
-	"sparse_infill_line_width": "1.2",
-	"inner_wall_line_width": "1.2",
-	"internal_solid_infill_line_width": "1.2",
-	"support_top_z_distance": "0.75",
-	"support_line_width": "1.2",
-	"tree_support_tip_diameter": "1.2",
-	"support_speed": "120",
-	"top_surface_line_width": "1.2",
-	"top_shell_layers": "3",
-	"compatible_printers": [
-		"Sovol Zero 1.0 nozzle",
-		"Sovol Zero 1.0 Hardened Steel nozzle"
-	]
-}

resources/profiles/Sovol/process/fdm_process_zero.json

@@ -1,73 +0,0 @@
-{
-	"type": "process",
-	"name": "fdm_process_zero",
-	"inherits": "fdm_process_common",
-	"from": "system",
-	"instantiation": "false",
-	"reduce_crossing_wall": "1",
-	"max_travel_detour_distance": "10",
-	"bottom_surface_pattern": "monotonic",
-	"bridge_flow": "1.2",
-	"internal_bridge_flow": "1.2",
-	"brim_type": "auto_brim",
-	"brim_width": "5",
-	"brim_object_gap": "0",
-	"print_sequence": "by layer",
-	"bridge_no_support": "0",
-	"draft_shield": "disabled",
-	"elefant_foot_compensation": "0.1",
-	"enable_arc_fitting": "0",
-	"exclude_object": "1",
-	"wall_infill_order": "inner wall/outer wall/infill",
-	"infill_direction": "45",
-	"sparse_infill_pattern": "grid",
-	"internal_solid_infill_acceleration": "50%",
-	"initial_layer_acceleration": "1000",
-	"travel_acceleration": "40000",
-	"outer_wall_jerk": "5",
-	"inner_wall_jerk": "5",
-	"infill_jerk": "5",
-	"top_surface_jerk": "5",
-	"initial_layer_jerk": "5",
-	"travel_jerk": "5",
-	"tree_support_wall_count": "0",
-	"reduce_infill_retraction": "1",
-	"detect_thin_wall": "1",
-	"top_surface_pattern": "monotonic",
-	"initial_layer_speed": "55",
-	"initial_layer_infill_speed": "105",
-	"initial_layer_travel_speed": "60%",
-	"outer_wall_speed": "350",
-	"inner_wall_speed": "400",
-	"small_perimeter_speed": "50%",
-	"internal_solid_infill_speed": "200",
-	"top_surface_speed": "200",
-	"gap_infill_speed": "200",
-	"sparse_infill_speed": "500",
-	"accel_to_decel_enable": "1",
-	"accel_to_decel_factor": "25%",
-	"travel_speed": "1000",
-	"enable_prime_tower": "0",
-	"wipe_tower_no_sparse_layers": "0",
-	"prime_tower_width": "60",
-	"xy_hole_compensation": "0",
-	"xy_contour_compensation": "0",
-	"bridge_acceleration": "50%",
-	"seam_gap": "10%",
-	"precise_outer_wall": "1",
-	"wall_generator": "classic",
-	"gcode_label_objects": "1",
-	"slow_down_layers": "3",
-	"top_solid_infill_flow_ratio": "0.9",
-	"only_one_wall_top": "1",
-	"top_bottom_infill_wall_overlap": "25%",
-	"filter_out_gap_fill": "0",
-	"detect_narrow_internal_solid_infill": "1",
-	"thick_bridges": "1",
-	"bridge_angle": "0",
-	"initial_layer_line_width": "150%",
-	"default_acceleration": "40000",
-	"compatible_printers": [],
-	"internal_bridge_speed": "150",
-	"filename_format": "{input_filename_base}_{nozzle_diameter[0]}n_{filament_type[0]}_{layer_height}_{print_time}.gcode"
-}

resources/profiles/Wanhao.json

@@ -1,60 +1,12 @@
 {
 	"name": "Wanhao",
-	"version": "02.04.00.03",
+	"version": "02.04.00.02",
 	"force_update": "0",
 	"description": "Wanhao configurations",
 	"machine_model_list": [
 		{
 			"name": "Wanhao D12-300",
 			"sub_path": "machine/Wanhao D12-300.json"
-		},
-		{
-			"name": "Wanhao D9-300 MK1",
-			"sub_path": "machine/Wanhao D9-300 MK1.json"
-		},
-		{
-			"name": "Wanhao D9-300 MK1 BLTouch kit",
-			"sub_path": "machine/Wanhao D9-300 MK1 BLTouch kit.json"
-		},
-		{
-			"name": "Wanhao D9-300 MK2",
-			"sub_path": "machine/Wanhao D9-300 MK2.json"
-		},
-		{
-			"name": "Wanhao D9-300 MK3",
-			"sub_path": "machine/Wanhao D9-300 MK3.json"
-		},
-		{
-			"name": "Wanhao D9-400 MK1",
-			"sub_path": "machine/Wanhao D9-400 MK1.json"
-		},
-		{
-			"name": "Wanhao D9-400 MK1 BLTouch kit",
-			"sub_path": "machine/Wanhao D9-400 MK1 BLTouch kit.json"
-		},
-		{
-			"name": "Wanhao D9-400 MK2",
-			"sub_path": "machine/Wanhao D9-400 MK2.json"
-		},
-		{
-			"name": "Wanhao D9-400 MK3",
-			"sub_path": "machine/Wanhao D9-400 MK3.json"
-		},
-		{
-			"name": "Wanhao D9-500 MK1",
-			"sub_path": "machine/Wanhao D9-500 MK1.json"
-		},
-		{
-			"name": "Wanhao D9-500 MK1 BLTouch kit",
-			"sub_path": "machine/Wanhao D9-500 MK1 BLTouch kit.json"
-		},
-		{
-			"name": "Wanhao D9-500 MK2",
-			"sub_path": "machine/Wanhao D9-500 MK2.json"
-		},
-		{
-			"name": "Wanhao D9-500 MK3",
-			"sub_path": "machine/Wanhao D9-500 MK3.json"
 		}
 	],
 	"process_list": [
@@ -81,38 +33,6 @@
 		{
 			"name": "0.24mm Draft @Wanhao D12-300",
 			"sub_path": "process/0.24mm Draft @Wanhao D12-300.json"
-		},
-		{
-			"name": "fdm_process_wanhao_d9_common",
-			"sub_path": "process/fdm_process_wanhao_d9_common.json"
-		},
-		{
-			"name": "0.12mm Fine @Wanhao D9",
-			"sub_path": "process/0.12mm Fine @Wanhao D9.json"
-		},
-		{
-			"name": "0.20mm Standard @Wanhao D9",
-			"sub_path": "process/0.20mm Standard @Wanhao D9.json"
-		},
-		{
-			"name": "0.28mm Draft @Wanhao D9",
-			"sub_path": "process/0.28mm Draft @Wanhao D9.json"
-		},
-		{
-			"name": "fdm_process_wanhao_d9_mk1_common",
-			"sub_path": "process/fdm_process_wanhao_d9_mk1_common.json"
-		},
-		{
-			"name": "0.12mm Fine @Wanhao D9 MK1",
-			"sub_path": "process/0.12mm Fine @Wanhao D9 MK1.json"
-		},
-		{
-			"name": "0.20mm Standard @Wanhao D9 MK1",
-			"sub_path": "process/0.20mm Standard @Wanhao D9 MK1.json"
-		},
-		{
-			"name": "0.28mm Draft @Wanhao D9 MK1",
-			"sub_path": "process/0.28mm Draft @Wanhao D9 MK1.json"
 		}
 	],
 	"filament_list": [],
@@ -128,62 +48,6 @@
 		{
 			"name": "Wanhao D12-300 0.4 nozzle",
 			"sub_path": "machine/Wanhao D12-300 0.4 nozzle.json"
-		},
-		{
-			"name": "fdm_wanhao_d9_common",
-			"sub_path": "machine/fdm_wanhao_d9_common.json"
-		},
-		{
-			"name": "Wanhao D9-300 MK1 BLTouch kit 0.4 nozzle",
-			"sub_path": "machine/Wanhao D9-300 MK1 BLTouch kit 0.4 nozzle.json"
-		},
-		{
-			"name": "Wanhao D9-300 MK2 0.4 nozzle",
-			"sub_path": "machine/Wanhao D9-300 MK2 0.4 nozzle.json"
-		},
-		{
-			"name": "Wanhao D9-300 MK3 0.4 nozzle",
-			"sub_path": "machine/Wanhao D9-300 MK3 0.4 nozzle.json"
-		},
-		{
-			"name": "Wanhao D9-400 MK1 BLTouch kit 0.4 nozzle",
-			"sub_path": "machine/Wanhao D9-400 MK1 BLTouch kit 0.4 nozzle.json"
-		},
-		{
-			"name": "Wanhao D9-400 MK2 0.4 nozzle",
-			"sub_path": "machine/Wanhao D9-400 MK2 0.4 nozzle.json"
-		},
-		{
-			"name": "Wanhao D9-400 MK3 0.4 nozzle",
-			"sub_path": "machine/Wanhao D9-400 MK3 0.4 nozzle.json"
-		},
-		{
-			"name": "Wanhao D9-500 MK1 BLTouch kit 0.4 nozzle",
-			"sub_path": "machine/Wanhao D9-500 MK1 BLTouch kit 0.4 nozzle.json"
-		},
-		{
-			"name": "Wanhao D9-500 MK2 0.4 nozzle",
-			"sub_path": "machine/Wanhao D9-500 MK2 0.4 nozzle.json"
-		},
-		{
-			"name": "Wanhao D9-500 MK3 0.4 nozzle",
-			"sub_path": "machine/Wanhao D9-500 MK3 0.4 nozzle.json"
-		},
-		{
-			"name": "fdm_wanhao_d9_mk1_common",
-			"sub_path": "machine/fdm_wanhao_d9_mk1_common.json"
-		},
-		{
-			"name": "Wanhao D9-300 MK1 0.4 nozzle",
-			"sub_path": "machine/Wanhao D9-300 MK1 0.4 nozzle.json"
-		},
-		{
-			"name": "Wanhao D9-400 MK1 0.4 nozzle",
-			"sub_path": "machine/Wanhao D9-400 MK1 0.4 nozzle.json"
-		},
-		{
-			"name": "Wanhao D9-500 MK1 0.4 nozzle",
-			"sub_path": "machine/Wanhao D9-500 MK1 0.4 nozzle.json"
 		}
 	]
 }

resources/profiles/Wanhao/machine/Wanhao D9-300 MK1 0.4 nozzle.json

@@ -1,20 +0,0 @@
-{
-	"type": "machine",
-	"name": "Wanhao D9-300 MK1 0.4 nozzle",
-	"inherits": "fdm_wanhao_d9_mk1_common",
-	"from": "system",
-	"setting_id": "MXNRpMDaVXj2xUx0",
-	"instantiation": "true",
-	"printer_model": "Wanhao D9-300 MK1",
-	"nozzle_diameter": [
-		"0.4"
-	],
-	"printable_area": [
-		"0x0",
-		"300x0",
-		"300x300",
-		"0x300"
-	],
-	"printable_height": "400",
-	"default_print_profile": "0.20mm Standard @Wanhao D9 MK1"
-}

resources/profiles/Wanhao/machine/Wanhao D9-300 MK1 BLTouch kit 0.4 nozzle.json

@@ -1,20 +0,0 @@
-{
-	"type": "machine",
-	"name": "Wanhao D9-300 MK1 BLTouch kit 0.4 nozzle",
-	"inherits": "fdm_wanhao_d9_common",
-	"from": "system",
-	"setting_id": "rq6cPs92KgrUyZrn",
-	"instantiation": "true",
-	"printer_model": "Wanhao D9-300 MK1 BLTouch kit",
-	"nozzle_diameter": [
-		"0.4"
-	],
-	"printable_area": [
-		"0x0",
-		"300x0",
-		"300x300",
-		"0x300"
-	],
-	"printable_height": "400",
-	"default_print_profile": "0.20mm Standard @Wanhao D9"
-}

resources/profiles/Wanhao/machine/Wanhao D9-300 MK1 BLTouch kit.json

@@ -1,9 +0,0 @@
-{
-	"type": "machine_model",
-	"name": "Wanhao D9-300 MK1 BLTouch kit",
-	"model_id": "Wanhao-D9-300-MK1u2",
-	"nozzle_diameter": "0.4",
-	"machine_tech": "FFF",
-	"family": "Wanhao",
-	"default_materials": "Generic PLA @System;Generic PETG @System;Generic ABS @System"
-}

resources/profiles/Wanhao/machine/Wanhao D9-300 MK1.json

@@ -1,9 +0,0 @@
-{
-	"type": "machine_model",
-	"name": "Wanhao D9-300 MK1",
-	"model_id": "Wanhao-D9-300-MK1",
-	"nozzle_diameter": "0.4",
-	"machine_tech": "FFF",
-	"family": "Wanhao",
-	"default_materials": "Generic PLA @System;Generic PETG @System;Generic ABS @System"
-}

resources/profiles/Wanhao/machine/Wanhao D9-300 MK2 0.4 nozzle.json

@@ -1,20 +0,0 @@
-{
-	"type": "machine",
-	"name": "Wanhao D9-300 MK2 0.4 nozzle",
-	"inherits": "fdm_wanhao_d9_common",
-	"from": "system",
-	"setting_id": "w3Cin9es1Jfx0dmR",
-	"instantiation": "true",
-	"printer_model": "Wanhao D9-300 MK2",
-	"nozzle_diameter": [
-		"0.4"
-	],
-	"printable_area": [
-		"0x0",
-		"300x0",
-		"300x300",
-		"0x300"
-	],
-	"printable_height": "400",
-	"default_print_profile": "0.20mm Standard @Wanhao D9"
-}

resources/profiles/Wanhao/machine/Wanhao D9-300 MK2.json

@@ -1,9 +0,0 @@
-{
-	"type": "machine_model",
-	"name": "Wanhao D9-300 MK2",
-	"model_id": "Wanhao-D9-300-MK2",
-	"nozzle_diameter": "0.4",
-	"machine_tech": "FFF",
-	"family": "Wanhao",
-	"default_materials": "Generic PLA @System;Generic PETG @System;Generic ABS @System"
-}

resources/profiles/Wanhao/machine/Wanhao D9-300 MK3 0.4 nozzle.json

@@ -1,20 +0,0 @@
-{
-	"type": "machine",
-	"name": "Wanhao D9-300 MK3 0.4 nozzle",
-	"inherits": "fdm_wanhao_d9_common",
-	"from": "system",
-	"setting_id": "acFQWZqlt4QSgBPv",
-	"instantiation": "true",
-	"printer_model": "Wanhao D9-300 MK3",
-	"nozzle_diameter": [
-		"0.4"
-	],
-	"printable_area": [
-		"0x0",
-		"300x0",
-		"300x300",
-		"0x300"
-	],
-	"printable_height": "400",
-	"default_print_profile": "0.20mm Standard @Wanhao D9"
-}

resources/profiles/Wanhao/machine/Wanhao D9-300 MK3.json

@@ -1,9 +0,0 @@
-{
-	"type": "machine_model",
-	"name": "Wanhao D9-300 MK3",
-	"model_id": "Wanhao-D9-300-MK3",
-	"nozzle_diameter": "0.4",
-	"machine_tech": "FFF",
-	"family": "Wanhao",
-	"default_materials": "Generic PLA @System;Generic PETG @System;Generic ABS @System"
-}

resources/profiles/Wanhao/machine/Wanhao D9-400 MK1 0.4 nozzle.json

@@ -1,20 +0,0 @@
-{
-	"type": "machine",
-	"name": "Wanhao D9-400 MK1 0.4 nozzle",
-	"inherits": "fdm_wanhao_d9_mk1_common",
-	"from": "system",
-	"setting_id": "DGSNE3AbmlBBG5PY",
-	"instantiation": "true",
-	"printer_model": "Wanhao D9-400 MK1",
-	"nozzle_diameter": [
-		"0.4"
-	],
-	"printable_area": [
-		"0x0",
-		"400x0",
-		"400x400",
-		"0x400"
-	],
-	"printable_height": "400",
-	"default_print_profile": "0.20mm Standard @Wanhao D9 MK1"
-}

resources/profiles/Wanhao/machine/Wanhao D9-400 MK1 BLTouch kit 0.4 nozzle.json

@@ -1,20 +0,0 @@
-{
-	"type": "machine",
-	"name": "Wanhao D9-400 MK1 BLTouch kit 0.4 nozzle",
-	"inherits": "fdm_wanhao_d9_common",
-	"from": "system",
-	"setting_id": "WcKY7v24ewtzPfnU",
-	"instantiation": "true",
-	"printer_model": "Wanhao D9-400 MK1 BLTouch kit",
-	"nozzle_diameter": [
-		"0.4"
-	],
-	"printable_area": [
-		"0x0",
-		"400x0",
-		"400x400",
-		"0x400"
-	],
-	"printable_height": "400",
-	"default_print_profile": "0.20mm Standard @Wanhao D9"
-}

resources/profiles/Wanhao/machine/Wanhao D9-400 MK1 BLTouch kit.json

@@ -1,9 +0,0 @@
-{
-	"type": "machine_model",
-	"name": "Wanhao D9-400 MK1 BLTouch kit",
-	"model_id": "Wanhao-D9-400-MK1u2",
-	"nozzle_diameter": "0.4",
-	"machine_tech": "FFF",
-	"family": "Wanhao",
-	"default_materials": "Generic PLA @System;Generic PETG @System;Generic ABS @System"
-}

resources/profiles/Wanhao/machine/Wanhao D9-400 MK1.json

@@ -1,9 +0,0 @@
-{
-	"type": "machine_model",
-	"name": "Wanhao D9-400 MK1",
-	"model_id": "Wanhao-D9-400-MK1",
-	"nozzle_diameter": "0.4",
-	"machine_tech": "FFF",
-	"family": "Wanhao",
-	"default_materials": "Generic PLA @System;Generic PETG @System;Generic ABS @System"
-}

resources/profiles/Wanhao/machine/Wanhao D9-400 MK2 0.4 nozzle.json

@@ -1,20 +0,0 @@
-{
-	"type": "machine",
-	"name": "Wanhao D9-400 MK2 0.4 nozzle",
-	"inherits": "fdm_wanhao_d9_common",
-	"from": "system",
-	"setting_id": "jn1FEJFeN7S2gEbD",
-	"instantiation": "true",
-	"printer_model": "Wanhao D9-400 MK2",
-	"nozzle_diameter": [
-		"0.4"
-	],
-	"printable_area": [
-		"0x0",
-		"400x0",
-		"400x400",
-		"0x400"
-	],
-	"printable_height": "400",
-	"default_print_profile": "0.20mm Standard @Wanhao D9"
-}

resources/profiles/Wanhao/machine/Wanhao D9-400 MK2.json

@@ -1,9 +0,0 @@
-{
-	"type": "machine_model",
-	"name": "Wanhao D9-400 MK2",
-	"model_id": "Wanhao-D9-400-MK2",
-	"nozzle_diameter": "0.4",
-	"machine_tech": "FFF",
-	"family": "Wanhao",
-	"default_materials": "Generic PLA @System;Generic PETG @System;Generic ABS @System"
-}

resources/profiles/Wanhao/machine/Wanhao D9-400 MK3 0.4 nozzle.json

@@ -1,20 +0,0 @@
-{
-	"type": "machine",
-	"name": "Wanhao D9-400 MK3 0.4 nozzle",
-	"inherits": "fdm_wanhao_d9_common",
-	"from": "system",
-	"setting_id": "2kFyH1E3tqMWtDmG",
-	"instantiation": "true",
-	"printer_model": "Wanhao D9-400 MK3",
-	"nozzle_diameter": [
-		"0.4"
-	],
-	"printable_area": [
-		"0x0",
-		"400x0",
-		"400x400",
-		"0x400"
-	],
-	"printable_height": "400",
-	"default_print_profile": "0.20mm Standard @Wanhao D9"
-}

resources/profiles/Wanhao/machine/Wanhao D9-400 MK3.json

@@ -1,9 +0,0 @@
-{
-	"type": "machine_model",
-	"name": "Wanhao D9-400 MK3",
-	"model_id": "Wanhao-D9-400-MK3",
-	"nozzle_diameter": "0.4",
-	"machine_tech": "FFF",
-	"family": "Wanhao",
-	"default_materials": "Generic PLA @System;Generic PETG @System;Generic ABS @System"
-}

resources/profiles/Wanhao/machine/Wanhao D9-500 MK1 0.4 nozzle.json

@@ -1,20 +0,0 @@
-{
-	"type": "machine",
-	"name": "Wanhao D9-500 MK1 0.4 nozzle",
-	"inherits": "fdm_wanhao_d9_mk1_common",
-	"from": "system",
-	"setting_id": "nj0TfnDKHb4wFX1R",
-	"instantiation": "true",
-	"printer_model": "Wanhao D9-500 MK1",
-	"nozzle_diameter": [
-		"0.4"
-	],
-	"printable_area": [
-		"0x0",
-		"500x0",
-		"500x500",
-		"0x500"
-	],
-	"printable_height": "500",
-	"default_print_profile": "0.20mm Standard @Wanhao D9 MK1"
-}

resources/profiles/Wanhao/machine/Wanhao D9-500 MK1 BLTouch kit 0.4 nozzle.json

@@ -1,20 +0,0 @@
-{
-	"type": "machine",
-	"name": "Wanhao D9-500 MK1 BLTouch kit 0.4 nozzle",
-	"inherits": "fdm_wanhao_d9_common",
-	"from": "system",
-	"setting_id": "Hmrnlh6pJzdO2dIJ",
-	"instantiation": "true",
-	"printer_model": "Wanhao D9-500 MK1 BLTouch kit",
-	"nozzle_diameter": [
-		"0.4"
-	],
-	"printable_area": [
-		"0x0",
-		"500x0",
-		"500x500",
-		"0x500"
-	],
-	"printable_height": "500",
-	"default_print_profile": "0.20mm Standard @Wanhao D9"
-}

resources/profiles/Wanhao/machine/Wanhao D9-500 MK1 BLTouch kit.json

@@ -1,9 +0,0 @@
-{
-	"type": "machine_model",
-	"name": "Wanhao D9-500 MK1 BLTouch kit",
-	"model_id": "Wanhao-D9-500-MK1u2",
-	"nozzle_diameter": "0.4",
-	"machine_tech": "FFF",
-	"family": "Wanhao",
-	"default_materials": "Generic PLA @System;Generic PETG @System;Generic ABS @System"
-}

resources/profiles/Wanhao/machine/Wanhao D9-500 MK1.json

@@ -1,9 +0,0 @@
-{
-	"type": "machine_model",
-	"name": "Wanhao D9-500 MK1",
-	"model_id": "Wanhao-D9-500-MK1",
-	"nozzle_diameter": "0.4",
-	"machine_tech": "FFF",
-	"family": "Wanhao",
-	"default_materials": "Generic PLA @System;Generic PETG @System;Generic ABS @System"
-}

resources/profiles/Wanhao/machine/Wanhao D9-500 MK2 0.4 nozzle.json

@@ -1,20 +0,0 @@
-{
-	"type": "machine",
-	"name": "Wanhao D9-500 MK2 0.4 nozzle",
-	"inherits": "fdm_wanhao_d9_common",
-	"from": "system",
-	"setting_id": "g2GSmhWJLFDwqzFI",
-	"instantiation": "true",
-	"printer_model": "Wanhao D9-500 MK2",
-	"nozzle_diameter": [
-		"0.4"
-	],
-	"printable_area": [
-		"0x0",
-		"500x0",
-		"500x500",
-		"0x500"
-	],
-	"printable_height": "500",
-	"default_print_profile": "0.20mm Standard @Wanhao D9"
-}

resources/profiles/Wanhao/machine/Wanhao D9-500 MK2.json

@@ -1,9 +0,0 @@
-{
-	"type": "machine_model",
-	"name": "Wanhao D9-500 MK2",
-	"model_id": "Wanhao-D9-500-MK2",
-	"nozzle_diameter": "0.4",
-	"machine_tech": "FFF",
-	"family": "Wanhao",
-	"default_materials": "Generic PLA @System;Generic PETG @System;Generic ABS @System"
-}

resources/profiles/Wanhao/machine/Wanhao D9-500 MK3 0.4 nozzle.json

@@ -1,20 +0,0 @@
-{
-	"type": "machine",
-	"name": "Wanhao D9-500 MK3 0.4 nozzle",
-	"inherits": "fdm_wanhao_d9_common",
-	"from": "system",
-	"setting_id": "F7l90Rgr8Ni0sQva",
-	"instantiation": "true",
-	"printer_model": "Wanhao D9-500 MK3",
-	"nozzle_diameter": [
-		"0.4"
-	],
-	"printable_area": [
-		"0x0",
-		"500x0",
-		"500x500",
-		"0x500"
-	],
-	"printable_height": "500",
-	"default_print_profile": "0.20mm Standard @Wanhao D9"
-}

resources/profiles/Wanhao/machine/Wanhao D9-500 MK3.json

@@ -1,9 +0,0 @@
-{
-	"type": "machine_model",
-	"name": "Wanhao D9-500 MK3",
-	"model_id": "Wanhao-D9-500-MK3",
-	"nozzle_diameter": "0.4",
-	"machine_tech": "FFF",
-	"family": "Wanhao",
-	"default_materials": "Generic PLA @System;Generic PETG @System;Generic ABS @System"
-}

resources/profiles/Wanhao/machine/fdm_wanhao_d9_common.json

@@ -1,108 +0,0 @@
-{
-	"type": "machine",
-	"name": "fdm_wanhao_d9_common",
-	"inherits": "fdm_wanhao_common",
-	"from": "system",
-	"instantiation": "false",
-	"gcode_flavor": "marlin2",
-	"use_relative_e_distances": "1",
-	"emit_machine_limits_to_gcode": "0",
-	"nozzle_diameter": [
-		"0.4"
-	],
-	"printer_variant": "0.4",
-	"max_layer_height": [
-		"0.32"
-	],
-	"min_layer_height": [
-		"0.08"
-	],
-	"machine_max_speed_x": [
-		"300",
-		"300"
-	],
-	"machine_max_speed_y": [
-		"300",
-		"300"
-	],
-	"machine_max_speed_z": [
-		"5",
-		"5"
-	],
-	"machine_max_speed_e": [
-		"25",
-		"25"
-	],
-	"machine_max_acceleration_x": [
-		"3000",
-		"3000"
-	],
-	"machine_max_acceleration_y": [
-		"3000",
-		"3000"
-	],
-	"machine_max_acceleration_z": [
-		"100",
-		"100"
-	],
-	"machine_max_acceleration_e": [
-		"3000",
-		"3000"
-	],
-	"machine_max_acceleration_extruding": [
-		"1000",
-		"1000"
-	],
-	"machine_max_acceleration_travel": [
-		"1000",
-		"1000"
-	],
-	"machine_max_acceleration_retracting": [
-		"800",
-		"800"
-	],
-	"machine_max_jerk_x": [
-		"10",
-		"10"
-	],
-	"machine_max_jerk_y": [
-		"10",
-		"10"
-	],
-	"machine_max_jerk_z": [
-		"0.4",
-		"0.4"
-	],
-	"machine_max_jerk_e": [
-		"1",
-		"1"
-	],
-	"retraction_length": [
-		"2.0"
-	],
-	"retraction_speed": [
-		"25"
-	],
-	"deretraction_speed": [
-		"25"
-	],
-	"retraction_minimum_travel": [
-		"1"
-	],
-	"z_hop": [
-		"0"
-	],
-	"wipe": [
-		"0"
-	],
-	"retract_when_changing_layer": [
-		"1"
-	],
-	"machine_start_gcode": "; Wanhao Duplicator 9 start G-code, for the Marlin 2.1 firmwares at github.com/Le-Syl21/WANHAO-Duplicator-9\nG21 ; millimetres\nG90 ; absolute coordinates\nM83 ; relative extrusion\nM140 S[bed_temperature_initial_layer_single] ; heat the bed\nM104 S150 ; warm the nozzle without letting it ooze\nG91 ; a print stopped by hand can leave the nozzle down on the bed\nG1 Z10 F300 ; so raise it before homing: a BLTouch needs 10 mm to deploy\nG90\nM280 P0 S160 ; BLTouch: clear an alarm and stow the pin\nG28 ; home all axes (this turns bed levelling off)\nM420 S1 ; turn the bed mesh saved from the screen back on\nG1 Z10 F300\nM104 S[nozzle_temperature_initial_layer] ; start the nozzle now, the bed is still heating\nM190 S[bed_temperature_initial_layer_single] ; wait for the bed\nM109 S[nozzle_temperature_initial_layer] ; and confirm the nozzle\nG92 E0\nG1 X15 Y20 Z0.3 F3000 ; start of the priming line\nG1 Y140 E9.0 F1200 ; draw a line of filament\nG1 X15.5 F3000\nG1 Y20 E9.0 F1200 ; and back, next to it\nG92 E0\nG1 X22 F6000 ; wipe sideways to snap the string\nG1 Z2 F300 ; lift, so the line does not stick to the nozzle",
-	"machine_end_gcode": "; Wanhao Duplicator 9 end G-code\nM104 S0 ; nozzle heater off\nM140 S0 ; bed heater off\nM107 ; fan off\nG91 ; relative moves\nG1 E-2 F1500 ; release the pressure in the nozzle\nG1 Z10 F300 ; lift the nozzle\nG90 ; absolute moves\nG1 X5 Y{print_bed_max[1] - 10} F3000 ; bring the bed to the front\nM84 X Y E ; motors off, Z keeps its position",
-	"layer_change_gcode": "G92 E0",
-	"machine_pause_gcode": "M600",
-	"default_filament_profile": [
-		"Generic PLA @System"
-	]
-}

resources/profiles/Wanhao/machine/fdm_wanhao_d9_mk1_common.json

@@ -1,28 +0,0 @@
-{
-	"type": "machine",
-	"name": "fdm_wanhao_d9_mk1_common",
-	"inherits": "fdm_wanhao_d9_common",
-	"from": "system",
-	"instantiation": "false",
-	"machine_start_gcode": "; Wanhao Duplicator 9 start G-code, for the Marlin 2.1 firmwares at github.com/Le-Syl21/WANHAO-Duplicator-9\nG21 ; millimetres\nG90 ; absolute coordinates\nM83 ; relative extrusion\nM140 S[bed_temperature_initial_layer_single] ; heat the bed\nM104 S150 ; warm the nozzle without letting it ooze\nG91 ; a print stopped by hand can leave the nozzle down on the bed\nG1 Z10 F300 ; clear the bed before homing\nG90\nG28 ; home all axes (this turns bed levelling off)\nM420 S1 ; turn the bed mesh saved from the screen back on\nG1 Z10 F300\nM104 S[nozzle_temperature_initial_layer] ; start the nozzle now, the bed is still heating\nM190 S[bed_temperature_initial_layer_single] ; wait for the bed\nM109 S[nozzle_temperature_initial_layer] ; and confirm the nozzle\nG92 E0\nG1 X15 Y20 Z0.3 F3000 ; start of the priming line\nG1 Y140 E9.0 F1200 ; draw a line of filament\nG1 X15.5 F3000\nG1 Y20 E9.0 F1200 ; and back, next to it\nG92 E0\nG1 X22 F6000 ; wipe sideways to snap the string\nG1 Z2 F300 ; lift, so the line does not stick to the nozzle",
-	"machine_max_acceleration_x": [
-		"500",
-		"500"
-	],
-	"machine_max_acceleration_y": [
-		"500",
-		"500"
-	],
-	"machine_max_acceleration_e": [
-		"500",
-		"500"
-	],
-	"machine_max_acceleration_extruding": [
-		"500",
-		"500"
-	],
-	"machine_max_acceleration_travel": [
-		"500",
-		"500"
-	]
-}

resources/profiles/Wanhao/process/0.12mm Fine @Wanhao D9 MK1.json

@@ -1,17 +0,0 @@
-{
-	"type": "process",
-	"name": "0.12mm Fine @Wanhao D9 MK1",
-	"inherits": "fdm_process_wanhao_d9_mk1_common",
-	"from": "system",
-	"setting_id": "EClNN5UDWbLACTuz",
-	"instantiation": "true",
-	"layer_height": "0.12",
-	"initial_layer_print_height": "0.14",
-	"top_shell_layers": "4",
-	"bottom_shell_layers": "4",
-	"compatible_printers": [
-		"Wanhao D9-300 MK1 0.4 nozzle",
-		"Wanhao D9-400 MK1 0.4 nozzle",
-		"Wanhao D9-500 MK1 0.4 nozzle"
-	]
-}

resources/profiles/Wanhao/process/0.12mm Fine @Wanhao D9.json

@@ -1,23 +0,0 @@
-{
-	"type": "process",
-	"name": "0.12mm Fine @Wanhao D9",
-	"inherits": "fdm_process_wanhao_d9_common",
-	"from": "system",
-	"setting_id": "0hvsKsPO55TlduZR",
-	"instantiation": "true",
-	"layer_height": "0.12",
-	"initial_layer_print_height": "0.14",
-	"top_shell_layers": "4",
-	"bottom_shell_layers": "4",
-	"compatible_printers": [
-		"Wanhao D9-300 MK1 BLTouch kit 0.4 nozzle",
-		"Wanhao D9-400 MK1 BLTouch kit 0.4 nozzle",
-		"Wanhao D9-500 MK1 BLTouch kit 0.4 nozzle",
-		"Wanhao D9-300 MK2 0.4 nozzle",
-		"Wanhao D9-400 MK2 0.4 nozzle",
-		"Wanhao D9-500 MK2 0.4 nozzle",
-		"Wanhao D9-300 MK3 0.4 nozzle",
-		"Wanhao D9-400 MK3 0.4 nozzle",
-		"Wanhao D9-500 MK3 0.4 nozzle"
-	]
-}

resources/profiles/Wanhao/process/0.20mm Standard @Wanhao D9 MK1.json

@@ -1,17 +0,0 @@
-{
-	"type": "process",
-	"name": "0.20mm Standard @Wanhao D9 MK1",
-	"inherits": "fdm_process_wanhao_d9_mk1_common",
-	"from": "system",
-	"setting_id": "CXNOj3tPeTUXx81B",
-	"instantiation": "true",
-	"layer_height": "0.20",
-	"initial_layer_print_height": "0.24",
-	"top_shell_layers": "3",
-	"bottom_shell_layers": "3",
-	"compatible_printers": [
-		"Wanhao D9-300 MK1 0.4 nozzle",
-		"Wanhao D9-400 MK1 0.4 nozzle",
-		"Wanhao D9-500 MK1 0.4 nozzle"
-	]
-}

resources/profiles/Wanhao/process/0.20mm Standard @Wanhao D9.json

@@ -1,23 +0,0 @@
-{
-	"type": "process",
-	"name": "0.20mm Standard @Wanhao D9",
-	"inherits": "fdm_process_wanhao_d9_common",
-	"from": "system",
-	"setting_id": "UVXxknNxJswqaURQ",
-	"instantiation": "true",
-	"layer_height": "0.20",
-	"initial_layer_print_height": "0.24",
-	"top_shell_layers": "3",
-	"bottom_shell_layers": "3",
-	"compatible_printers": [
-		"Wanhao D9-300 MK1 BLTouch kit 0.4 nozzle",
-		"Wanhao D9-400 MK1 BLTouch kit 0.4 nozzle",
-		"Wanhao D9-500 MK1 BLTouch kit 0.4 nozzle",
-		"Wanhao D9-300 MK2 0.4 nozzle",
-		"Wanhao D9-400 MK2 0.4 nozzle",
-		"Wanhao D9-500 MK2 0.4 nozzle",
-		"Wanhao D9-300 MK3 0.4 nozzle",
-		"Wanhao D9-400 MK3 0.4 nozzle",
-		"Wanhao D9-500 MK3 0.4 nozzle"
-	]
-}

resources/profiles/Wanhao/process/0.28mm Draft @Wanhao D9 MK1.json

@@ -1,17 +0,0 @@
-{
-	"type": "process",
-	"name": "0.28mm Draft @Wanhao D9 MK1",
-	"inherits": "fdm_process_wanhao_d9_mk1_common",
-	"from": "system",
-	"setting_id": "omfIWwVnQVVxPrtb",
-	"instantiation": "true",
-	"layer_height": "0.28",
-	"initial_layer_print_height": "0.34",
-	"top_shell_layers": "3",
-	"bottom_shell_layers": "3",
-	"compatible_printers": [
-		"Wanhao D9-300 MK1 0.4 nozzle",
-		"Wanhao D9-400 MK1 0.4 nozzle",
-		"Wanhao D9-500 MK1 0.4 nozzle"
-	]
-}

resources/profiles/Wanhao/process/0.28mm Draft @Wanhao D9.json

@@ -1,23 +0,0 @@
-{
-	"type": "process",
-	"name": "0.28mm Draft @Wanhao D9",
-	"inherits": "fdm_process_wanhao_d9_common",
-	"from": "system",
-	"setting_id": "FEJqq1ylXWqaBPR6",
-	"instantiation": "true",
-	"layer_height": "0.28",
-	"initial_layer_print_height": "0.34",
-	"top_shell_layers": "3",
-	"bottom_shell_layers": "3",
-	"compatible_printers": [
-		"Wanhao D9-300 MK1 BLTouch kit 0.4 nozzle",
-		"Wanhao D9-400 MK1 BLTouch kit 0.4 nozzle",
-		"Wanhao D9-500 MK1 BLTouch kit 0.4 nozzle",
-		"Wanhao D9-300 MK2 0.4 nozzle",
-		"Wanhao D9-400 MK2 0.4 nozzle",
-		"Wanhao D9-500 MK2 0.4 nozzle",
-		"Wanhao D9-300 MK3 0.4 nozzle",
-		"Wanhao D9-400 MK3 0.4 nozzle",
-		"Wanhao D9-500 MK3 0.4 nozzle"
-	]
-}

resources/profiles/Wanhao/process/fdm_process_wanhao_d9_common.json

@@ -1,38 +0,0 @@
-{
-	"type": "process",
-	"name": "fdm_process_wanhao_d9_common",
-	"inherits": "fdm_process_wanhao_common",
-	"from": "system",
-	"instantiation": "false",
-	"line_width": "0.4",
-	"initial_layer_line_width": "0.6",
-	"wall_loops": "2",
-	"infill_wall_overlap": "15%",
-	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "gyroid",
-	"outer_wall_speed": "25",
-	"inner_wall_speed": "40",
-	"sparse_infill_speed": "50",
-	"internal_solid_infill_speed": "50",
-	"top_surface_speed": "40",
-	"gap_infill_speed": "40",
-	"bridge_speed": "50",
-	"support_speed": "35",
-	"initial_layer_speed": "25",
-	"initial_layer_infill_speed": "25",
-	"travel_speed": "100",
-	"default_acceleration": "1000",
-	"outer_wall_acceleration": "1000",
-	"inner_wall_acceleration": "1000",
-	"top_surface_acceleration": "1000",
-	"sparse_infill_acceleration": "1000",
-	"initial_layer_acceleration": "1000",
-	"bridge_acceleration": "1000",
-	"travel_acceleration": "1000",
-	"default_jerk": "0",
-	"skirt_loops": "2",
-	"skirt_distance": "4",
-	"brim_type": "no_brim",
-	"enable_support": "0",
-	"enable_arc_fitting": "0"
-}

resources/profiles/Wanhao/process/fdm_process_wanhao_d9_mk1_common.json

@@ -1,15 +0,0 @@
-{
-	"type": "process",
-	"name": "fdm_process_wanhao_d9_mk1_common",
-	"inherits": "fdm_process_wanhao_d9_common",
-	"from": "system",
-	"instantiation": "false",
-	"default_acceleration": "500",
-	"outer_wall_acceleration": "500",
-	"inner_wall_acceleration": "500",
-	"top_surface_acceleration": "500",
-	"sparse_infill_acceleration": "500",
-	"initial_layer_acceleration": "500",
-	"bridge_acceleration": "500",
-	"travel_acceleration": "500"
-}

resources/web/dialog/PluginsDialog/index.js

@@ -575,7 +575,7 @@ function CapabilityCanRun(plugin, capability) {
 }
 
 function IsPluginChecked(plugin) {
-  return GetStatus(plugin) === "Activated";
+  return plugin.is_loaded;
 }
 
 function HasMixedCapabilityState(plugin) {
@@ -1347,6 +1347,8 @@ function StatusDescription(plugin) {
       return "This plugin is still loading.";
     case "Error":
       return "This plugin is blocked until its error is fixed.";
+    case "RuntimeError":
+      return "This plugin is loaded but a capability reported an error.";
     case "Inactive":
     default:
       return "This plugin is inactive. Activate it to install or load it.";

resources/web/dialog/PluginsDialog/styles.css

@@ -424,6 +424,11 @@ body.pane-resizing {
   font-weight: 600;
 }
 
+.status-cell.status-runtimeerror {
+  color: var(--plugin-status-warn);
+  font-weight: 600;
+}
+
 .status-cell.status-loading {
   color: var(--plugin-status-warn);
   font-weight: 600;
@@ -680,6 +685,11 @@ body.pane-resizing {
   color: var(--plugin-status-danger);
 }
 
+.detail-status-chip.status-runtimeerror {
+  background: var(--plugin-status-warn-bg);
+  color: var(--plugin-status-warn);
+}
+
 .detail-status-chip.status-loading {
   background: var(--plugin-status-warn-bg);
   color: var(--plugin-status-warn);

resources/web/dialog/SpeedDial/speeddial.js

@@ -30,7 +30,7 @@ var USER_MODE = "simple";
 var MODE_RANK = { simple: 0, advanced: 1, expert: 2, develop: 3 };
 
 // Search ranking weights: every contiguous match must outrank every fuzzy one regardless of field,
-// and title must outrank group/category, which outranks source.
+// and title must outrank group, which outranks source.
 var SCORE_CONTIGUOUS = 100000;
 var SCORE_TITLE = 2000;
 var SCORE_GROUP = 1000;
@@ -118,18 +118,6 @@ function sourceNorm(a) {
         a._sn = NormText(a.source || "", false);
     return a._sn;
 }
-function pluginCategoryNorm(a) {
-    if (a._pcn === undefined)
-        a._pcn = a.kind === "plugin" ? NormText(T("sd_plugins", "Plugins"), false) : "";
-    return a._pcn;
-}
-// Plugin type is searchable metadata, so typing "plugin" can find runnable plugin actions even
-// when neither their capability nor plugin name contains that word. Keep both category forms.
-function pluginTypeNorm(a) {
-    if (a._pn === undefined)
-        a._pn = a.kind === "plugin" ? NormText("plugin plugins", false) : "";
-    return a._pn;
-}
 // Search-only alias for the descriptive name when the title differs (e.g. "Reverse on even" vs
 // "Overhang reversal"). Never rendered, so no highlight ranges.
 function fullNorm(a) {
@@ -164,7 +152,7 @@ function fieldMatchScore(norm, needle, wwRe) {
 
 // Split a query into normalized (folded+lowercased) whitespace-separated tokens. Empty for a blank
 // query. These drive the multi-token path: every token must match some field, but different tokens
-// may match different fields (the title, group, source breadcrumb, or plugin kind).
+// may match different fields (the title, the group, or the source breadcrumb).
 function queryTokens(query) {
     var norm = NormText(String(query || "").trim(), false);
     return norm ? norm.split(/\s+/).filter(Boolean) : [];
@@ -182,19 +170,14 @@ function tokenMatch(a, token, wwRe) {
     var g = fieldMatchScore(groupNorm(a), token, wwRe);
     var s = fieldMatchScore(sourceNorm(a), token, wwRe);
     var f = fieldMatchScore(fullNorm(a), token, wwRe);
-    var p = fieldMatchScore(pluginCategoryNorm(a), token, wwRe);
-    var typeMatch = fieldMatchScore(pluginTypeNorm(a), token, wwRe);
-    if (!t && !g && !s && !f && !p && !typeMatch) return null;
+    if (!t && !g && !s && !f) return null;
     var score = Math.max(
         t ? (t.contiguous ? SCORE_CONTIGUOUS : 0) + SCORE_TITLE + t.score : -Infinity,
         g ? (g.contiguous ? SCORE_CONTIGUOUS : 0) + SCORE_GROUP + g.score : -Infinity,
         s ? (s.contiguous ? SCORE_CONTIGUOUS : 0) + s.score : -Infinity,
-        f ? (f.contiguous ? SCORE_CONTIGUOUS : 0) + f.score : -Infinity,
-        p ? (p.contiguous ? SCORE_CONTIGUOUS : 0) + SCORE_GROUP + p.score : -Infinity,
-        typeMatch ? (typeMatch.contiguous ? SCORE_CONTIGUOUS : 0) + SCORE_GROUP + typeMatch.score : -Infinity
+        f ? (f.contiguous ? SCORE_CONTIGUOUS : 0) + f.score : -Infinity
     );
-    return { score: score, title: t ? t.ranges : null, group: g ? g.ranges : null, source: s ? s.ranges : null,
-             plugin: p ? p.ranges : null };
+    return { score: score, title: t ? t.ranges : null, group: g ? g.ranges : null, source: s ? s.ranges : null };
 }
 
 // Merge per-field token ranges into sorted, coalesced ranges for highlighting. Overlapping or adjacent
@@ -218,8 +201,8 @@ function mergeRanges(ranges) {
 }
 
 // Combine per-field scores into one value, or null when nothing matched.
-// Ranking: contiguous > fuzzy, then title > group/category > source/full alias, then start/gaps.
-function scoreFields(t, g, s, f, p, typeMatch) {
+// Ranking: contiguous > fuzzy, then title > group > source/full alias, then start/gaps.
+function scoreFields(t, g, s, f) {
     var best = null;
     function consider(m, weight) {
         if (!m) return;
@@ -230,8 +213,6 @@ function scoreFields(t, g, s, f, p, typeMatch) {
     consider(g, SCORE_GROUP);
     consider(s, 0);
     consider(f, 0);
-    consider(p, SCORE_GROUP);
-    consider(typeMatch, SCORE_GROUP);
     return best;
 }
 
@@ -245,8 +226,7 @@ function scoreFields(t, g, s, f, p, typeMatch) {
 //   - tokens: every whitespace-separated word must match SOME field, but different words may match
 //     different fields. This is what lets "speed acceleration inner" find "Inner wall" whose path is
 //     "Process : Speed : Acceleration" (title + source breadcrumb together).
-// full_label and canonical plugin kind are searchable aliases. The visible category is also searchable
-// so its own match can be highlighted in plugin rows.
+// full_label is searchable too but never highlighted, since it is not rendered.
 // A phrase match always outranks a distributed token match.
 function searchActions(actions, query) {
     var q = (query || "").trim();
@@ -271,31 +251,26 @@ function searchActions(actions, query) {
         var g = fieldMatchScore(groupNorm(a), searchNeedle, wwRe);
         var s = fieldMatchScore(sourceNorm(a), searchNeedle, wwRe);
         var f = fieldMatchScore(fullNorm(a), searchNeedle, wwRe);
-        var p = fieldMatchScore(pluginCategoryNorm(a), searchNeedle, wwRe);
-        var typeMatch = fieldMatchScore(pluginTypeNorm(a), searchNeedle, wwRe);
-        var phrase = scoreFields(t, g, s, f, p, typeMatch);
+        var phrase = scoreFields(t, g, s, f);
         var score, ranges;
         if (phrase !== null) {
             score = phrase + SCORE_PHRASE;
-            ranges = { title: t ? t.ranges : null, group: g ? g.ranges : null, source: s ? s.ranges : null,
-                       plugin: p ? p.ranges : null };
+            ranges = { title: t ? t.ranges : null, group: g ? g.ranges : null, source: s ? s.ranges : null };
         } else {
             // Require every token; a token that matches nothing drops the action immediately. Ranges
             // from all matching tokens are merged per field so each matched word highlights.
-            var sum = 0, titleR = null, groupR = null, sourceR = null, pluginR = null, all = true;
-            for (var tokenIndex = 0; tokenIndex < searchTokens.length; tokenIndex++) {
-                var m = tokenMatch(a, searchTokens[tokenIndex], searchTokenRes[tokenIndex]);
+            var sum = 0, titleR = null, groupR = null, sourceR = null, all = true;
+            for (var k = 0; k < searchTokens.length; k++) {
+                var m = tokenMatch(a, searchTokens[k], searchTokenRes[k]);
                 if (!m) { all = false; break; }
                 sum += m.score;
                 if (m.title) (titleR || (titleR = [])).push(m.title);
                 if (m.group) (groupR || (groupR = [])).push(m.group);
                 if (m.source) (sourceR || (sourceR = [])).push(m.source);
-                if (m.plugin) (pluginR || (pluginR = [])).push(m.plugin);
             }
             if (!all) continue;
             score = sum;
-            ranges = { title: mergeRanges(titleR), group: mergeRanges(groupR), source: mergeRanges(sourceR),
-                       plugin: mergeRanges(pluginR) };
+            ranges = { title: mergeRanges(titleR), group: mergeRanges(groupR), source: mergeRanges(sourceR) };
         }
         // Ranges are per-field against the ACTUAL text drawn: title for the row-name, and group (or
         // source when group is empty) for the eyebrow - so highlight offsets stay aligned to the label.
@@ -303,7 +278,6 @@ function searchActions(actions, query) {
             title: ranges.title,
             group: ranges.group,
             source: ranges.source,
-            plugin: ranges.plugin,
             useEyebrowGroup: !!(a.group)
         };
         scored.push({ a: a, s: score });
@@ -416,7 +390,7 @@ function favDigitFromEvent(e) {
 
 function resultCountText(total, shown, query) {
     return (query || "").trim() ?
-        T("sd_result_count", "Showing %s actions", shown) :
+        T("sd_result_count", "Showing %s of %s actions", shown, total) :
         T("sd_result_count_all", "%s actions", total);
 }
 
@@ -487,12 +461,6 @@ function actionCategory(a) {
     return cat || T("sd_other", "Other");
 }
 
-function actionEyebrow(a, typedQuery, isRecent) {
-    if (a && a.kind === "plugin" && (String(typedQuery || "").trim() || isRecent))
-        return T("sd_plugins", "Plugins");
-    return (a && (a.group || a.source)) || "";
-}
-
 // Stable-bucket actions by category, then order the groups alphabetically. Within a group the incoming
 // (frecency) order is kept. Pure so the node-vm test can exercise grouping.
 function groupActions(list) {
@@ -743,7 +711,7 @@ window.HandleStudio = function (payload) {
         builtKey = "";
         if (qEl) {
             qEl.value = "";
-            qEl.placeholder = T("sd_search", "Search actions");
+            qEl.placeholder = T("sd_search_n", "Search %s actions", ACTIONS.length);
             syncClearButton();
         }
         render({ resize: true, resetScroll: true });
@@ -963,14 +931,12 @@ function beginRow(item, i, mono, ariaLabel) {
 function renderActionRow(a, i) {
     var on = FAVS.indexOf(a.id) !== -1;
     var shell = beginRow(a, i, false, actionLabel(a, ACTIONS));
-    var typedQuery = String(query || "").trim();
-    var isRecent = !typedQuery && i < RECENTS.length && RECENTS[i].id === a.id;
-    var mi = typedQuery ? matchIndex[a.id] : null;
-    // Plugin search/recent rows show their category; other rows show their group or source breadcrumb.
-    // Use match ranges from the visible field so category and breadcrumb highlights stay aligned.
-    var showPluginCategory = a.kind === "plugin" && (typedQuery || isRecent);
-    var eyebrow = actionEyebrow(a, query, isRecent);
-    var eyebrowMatch = mi ? (showPluginCategory ? mi.plugin : (mi.useEyebrowGroup ? mi.group : mi.source)) : null;
+    var mi = matchIndex[a.id];
+    // The eyebrow shows group when present, else source. Highlight with the ranges of whichever of the
+    // two the eyebrow actually renders (so a "Recent Projects"/"Object" header match lights up like a
+    // setting path does - the offsets are computed against the same string we are marking).
+    var eyebrow = a.group || a.source;
+    var eyebrowMatch = mi ? (mi.useEyebrowGroup ? mi.group : mi.source) : null;
     shell.left.insertBefore(markedText("row-eyebrow", eyebrow, eyebrowMatch), shell.line);
     shell.line.appendChild(markedText("row-name", a.title, mi ? mi.title : null));
     var badge = modeBadge(a, USER_MODE);
@@ -1410,7 +1376,7 @@ function exitPhase() {
     // It survives a second-phase exit (which never goes through exitPhase from the commands view),
     // so without a reset the cached empty-query key would skip the rebuild and leave stale content.
     builtKey = "";
-    qEl.placeholder = T("sd_search", "Search actions");
+    qEl.placeholder = T("sd_search_n", "Search %s actions", ACTIONS.length);
     render({ resize: true, resetScroll: true });
     qEl.focus();
 }

resources/web/dialog/SpeedDial/speeddial.test.js

@@ -82,20 +82,6 @@ assert.equal(ctx.searchActions(pool, "layer").length >= 2, true,
 assert.equal(ctx.searchActions(pool, "surface")[0].id, "c2",
     "a later-but-precise match still ranks by relevance, not by pool type");
 
-const pluginPool = [
-    { id: "plugin-action", title: "Optimize G-code", source: "Gcode Optimizer", group: "", kind: "plugin" },
-    { id: "command-action", title: "Open Preferences", source: "OrcaSlicer", group: "Commands", kind: "command" }
-];
-assert.deepEqual(ctx.searchActions(pluginPool, "plugin").map(function (a) { return a.id; }), ["plugin-action"],
-    "the plugin kind makes runnable plugin actions searchable by plugin");
-assert.deepEqual(ctx.searchActions(pluginPool, "plugins").map(function (a) { return a.id; }), ["plugin-action"],
-    "the plural Plugins category also finds plugin actions");
-ctx.searchActions(pluginPool, "plugins");
-assert.deepEqual(ctx.matchIndex["plugin-action"].plugin, [[0, 7]],
-    "a category match highlights the visible Plugins label");
-assert.deepEqual(ctx.searchActions(pluginPool, "plugin optimize").map(function (a) { return a.id; }), ["plugin-action"],
-    "plugin kind can match one token while the action title matches another");
-
 // A perfect match (the needle as one contiguous run) outranks a fuzzy match of the same field - and a
 // contiguous GROUP/header hit ("Recent Projects") beats a scattered fuzzy TITLE hit ("Retraction Length"),
 // which is what the old flat title-bonus ranking got backwards.
@@ -202,12 +188,6 @@ assert.equal(ctx.actionCategory({ id: "s", group: "", source: "Filament : Coolin
     "a Filament setting groups under Filament");
 assert.equal(ctx.actionCategory({ id: "plugin_script_action:Foo:bar.py", group: "", source: "Gcode Optimizer", kind: "plugin" }), "Plugins",
     "every plugin shares one Plugins header");
-assert.equal(ctx.actionEyebrow({ group: "", source: "Gcode Optimizer", kind: "plugin" }, "plugin"), "Plugins",
-    "typed results show only the Plugins category");
-assert.equal(ctx.actionEyebrow({ group: "", source: "Gcode Optimizer", kind: "plugin" }, "", true), "Plugins",
-    "recent plugin actions show only the Plugins category");
-assert.equal(ctx.actionEyebrow({ group: "", source: "Gcode Optimizer", kind: "plugin" }, ""), "Gcode Optimizer",
-    "the unfiltered plugin section keeps the source name on non-recent rows");
 assert.equal(ctx.actionCategory({ id: "x", group: "", source: "", kind: "command" }), "Other",
     "a category-less action falls back to Other");
 
@@ -456,9 +436,4 @@ assert.equal(ctx.stateFromPayload({}).tooltipExpanded, true, "expansion defaults
 assert.equal(ctx.stateFromPayload({ tooltip_expanded: false }).tooltipExpanded, false, "a collapsed payload is honored");
 assert.equal(ctx.stateFromPayload({ tooltip_expanded: true }).tooltipExpanded, true, "an expanded payload is honored");
 
-// resultCountText: a search counts the shown matches only ("Showing N actions"); the total is used
-// solely for the empty-query count.
-assert.equal(ctx.resultCountText(100, 3, "lay"), "Showing 3 actions", "a search reports the shown match count only");
-assert.equal(ctx.resultCountText(100, 100, ""), "100 actions", "an empty query reports the total");
-
 console.log("ok");

scripts/flatpak/com.orcaslicer.OrcaSlicer.yml

@@ -331,6 +331,15 @@ modules:
         sha256: deedcabe339165214a3637df4c86a507aef0d793cf8774ff68735f4737e8ddbc
         dest: external-packages/FFMPEG
 
+      # libdatachannel v0.24.5
+      # The Git checkout includes the submodules that are missing from the
+      # GitHub source archive. DataChannel.cmake consumes it as SOURCE_DIR.
+      - type: git
+        url: https://github.com/paullouisageneau/libdatachannel.git
+        tag: v0.24.5
+        commit: 443f6934d9007eb7076ab7825ba330f355fcbead
+        dest: external-packages/DataChannel
+
       # ---------------------------------------------------------------
       # Fallback archives for deps normally provided by the GNOME SDK.
       # These are only used if find_package() fails to locate them.

scripts/tests/test_filament_id.py

@@ -405,20 +405,6 @@ class TestTripleResolution(unittest.TestCase):
         self.assertEqual(afi.resolve_triple("MyPLA @P1", fmap, {}),
                          ("MyVendor", "PLA", "MyPLA"))
 
-    def test_split_vendor_and_type_bases_resolve(self):
-        # A partial base is normal, not an error: vendor and type may live on
-        # different ancestors, with an intermediate supplying neither (the
-        # Snapmaker shape). The pair is complete at the instantiated preset.
-        recs = [
-            self.rec("APLA @P1", inherits="mid"),
-            self.rec("mid", inherits="typebase"),
-            self.rec("typebase", filament_type=["PLA"], inherits="vendorbase"),
-            self.rec("vendorbase", filament_vendor=["AV"]),
-        ]
-        fmap = {r["name"]: r for r in recs}
-        self.assertEqual(afi.resolve_triple("APLA @P1", fmap, {}),
-                         ("AV", "PLA", "APLA"))
-
 
 # ---------------------------------------------------------------------------
 # checks on synthetic trees
@@ -431,24 +417,6 @@ class TestChecks(OfCleanTreeCase):
         self.assertNotIn("[ERROR]", out)
         self.assertNotIn("[WARNING]", out)
 
-    def test_instantiated_preset_over_partial_bases_is_silent(self):
-        # Vendor and type split across two non-instantiated bases, an
-        # intermediate base with neither: base profiles are allowed to be
-        # partial. Only the instantiated preset must resolve both.
-        self.t.write_preset("VendorA", preset("XPLA vendorbase", instantiation=False,
-                                              filament_vendor="XV"))
-        self.t.write_preset("VendorA", preset("XPLA typebase", instantiation=False,
-                                              filament_type="PLA",
-                                              inherits="XPLA vendorbase"))
-        self.t.write_preset("VendorA", preset("XPLA mid", instantiation=False,
-                                              inherits="XPLA typebase"))
-        self.t.write_preset("VendorA", preset(
-            "XPLA @P1", inherits="XPLA mid",
-            filament_id=afi.generate_filament_id("XV", "PLA", "XPLA"),
-            compatible_printers=["P1"]))
-        errors, out = self.t.check()
-        self.assertEqual(errors, 0, out)
-
     def test_check1_unknown_non_of_id(self):
         self.t.write_preset("VendorA", preset("BPLA @base", filament_id="BOGUS_9",
                                               instantiation=False,
@@ -1555,19 +1523,6 @@ class TestRealTree(unittest.TestCase):
         self.assertEqual(analysis["missing_effective"], [])
         self.assertEqual(analysis["read_errors"], [])
 
-    def test_every_instantiated_filament_resolves_vendor_and_type(self):
-        # The property the web guide resolves at load: a partial base is fine as
-        # long as the instantiated preset ends up with both fields. Guards the
-        # split-base bundles (Snapmaker, Anker, SeeMeCNC).
-        analysis = afi.analyze_tree(REAL_PROFILES)
-        unresolved = [
-            (vendor, rec["name"], rec["triple"][0], rec["triple"][1])
-            for vendor, filaments in analysis["vendors"].items()
-            for rec in filaments.values()
-            if rec["instantiation"] and not (rec["triple"][0] and rec["triple"][1])
-        ]
-        self.assertEqual(unresolved, [])
-
 # ---------------------------------------------------------------------------
 # review-fix regressions
 # ---------------------------------------------------------------------------

src/libslic3r/PresetBundle.cpp

@@ -3708,42 +3708,58 @@ unsigned int PresetBundle::sync_ams_list(std::vector<std::pair<DynamicPrintConfi
         ams_array_maps.push_back(temp);
         index++;
         if (filament_id.empty()) {
-            if (use_map) {
-                for (int j = maps.size() - 1; j >= 0; j--) {
-                    if (maps[j].slot_id == slot_id && maps[j].ams_id == ams_id) {
-                        maps.erase(j);
+            // A tray written by the printer UI carries a material type but no
+            // OrcaSlicer preset id. Resolve it to the matching Generic preset with
+            // the tray's own color instead of dropping it (direct sync) or forcing
+            // "Generic PLA" (mapping sync). Placeholders and typeless trays keep
+            // the previous behavior.
+            const auto tray_type = ams.opt_string("filament_type", 0u);
+            if (is_placeholder || tray_type.empty()) {
+                if (use_map) {
+                    for (int j = maps.size() - 1; j >= 0; j--) {
+                        if (maps[j].slot_id == slot_id && maps[j].ams_id == ams_id) {
+                            maps.erase(j);
+                        }
                     }
+                    ams_filament_presets.push_back("Generic PLA");//for unknow matieral
+                    auto default_unknown_color = "#CECECE";
+                    ams_filament_colors.push_back(default_unknown_color);
+                    ams_filament_color_types.push_back("1");
+                    if (filament_multi_color.size() == 0) {
+                        filament_multi_color.push_back(default_unknown_color);
+                    }
+                    ams_multi_color_filment.push_back(filament_multi_color);
+                } else if (is_placeholder) {
+                    // Orca: push placeholders to keep index alignment with ams_infos
+                    ams_filament_presets.push_back("");
+                    ams_filament_colors.push_back("");
+                    ams_filament_color_types.push_back("");
+                    ams_multi_color_filment.push_back({});
                 }
-                ams_filament_presets.push_back("Generic PLA");//for unknow matieral
-                auto default_unknown_color = "#CECECE";
-                ams_filament_colors.push_back(default_unknown_color);
-                ams_filament_color_types.push_back("1");
-                if (filament_multi_color.size() == 0) {
-                    filament_multi_color.push_back(default_unknown_color);
-                }
-                ams_multi_color_filment.push_back(filament_multi_color);
-            } else if (is_placeholder) {
-                // Orca: push placeholders to keep index alignment with ams_infos
-                ams_filament_presets.push_back("");
-                ams_filament_colors.push_back("");
-                ams_filament_color_types.push_back("");
-                ams_multi_color_filment.push_back({});
+                continue;
             }
-            continue;
         }
         if (!filament_changed && this->filament_presets.size() > ams_filament_presets.size()) {
             ams_filament_presets.push_back(this->filament_presets[ams_filament_presets.size()]);
             ams_filament_colors.push_back(filament_color);
             ams_filament_color_types.push_back(filament_color_type);
             ams_multi_color_filment.push_back(filament_multi_color);
+            ams_infos.back().valid = true;
             continue;
         }
         bool has_type = false;
         auto filament_type = ams.opt_string("filament_type", 0u);
-        auto iter = std::find_if(filaments.begin(), filaments.end(), [this, &filament_id, &has_type, filament_type](auto &f) {
-            has_type |= f.config.opt_string("filament_type", 0u) == filament_type;
-            return f.is_compatible && filaments.get_preset_base(f) == &f && f.filament_id == filament_id; });
-        warn_ambiguous_filament_id_match(filaments, iter, filament_id);
+        auto iter = filaments.end();
+        if (!filament_id.empty()) {
+            iter = std::find_if(filaments.begin(), filaments.end(), [this, &filament_id, &has_type, filament_type](auto &f) {
+                has_type |= f.config.opt_string("filament_type", 0u) == filament_type;
+                return f.is_compatible && filaments.get_preset_base(f) == &f && f.filament_id == filament_id; });
+            warn_ambiguous_filament_id_match(filaments, iter, filament_id);
+        } else {
+            // The material type is the only identity a printer-set tray carries.
+            has_type = std::any_of(filaments.begin(), filaments.end(), [&filament_type](auto &f) {
+                return f.is_compatible && f.config.opt_string("filament_type", 0u) == filament_type; });
+        }
         if (iter == filaments.end()) {
             BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << boost::format(": filament_id %1% not found or system or compatible") % filament_id;
             if (!filament_type.empty()) {
@@ -3790,6 +3806,7 @@ unsigned int PresetBundle::sync_ams_list(std::vector<std::pair<DynamicPrintConfi
                     ams_filament_colors.push_back(filament_color);
                     ams_filament_color_types.push_back(filament_color_type);
                     ams_multi_color_filment.push_back(filament_multi_color);
+                    ams_infos.back().valid = true;
                     unknowns.emplace_back(&ams, has_type ? L("The filament may not be compatible with the current machine settings. Generic filament presets will be used.") :
                                                            L("The filament model is unknown. Still using the previous filament preset."));
                     continue;
@@ -3816,6 +3833,7 @@ unsigned int PresetBundle::sync_ams_list(std::vector<std::pair<DynamicPrintConfi
         ams_filament_colors.push_back(filament_color);
         ams_filament_color_types.push_back(filament_color_type);
         ams_multi_color_filment.push_back(filament_multi_color);
+        ams_infos.back().valid = true;
     }
     if (ams_filament_presets.empty())
         return 0;
@@ -3824,7 +3842,6 @@ unsigned int PresetBundle::sync_ams_list(std::vector<std::pair<DynamicPrintConfi
     ConfigOptionStrings *filament_color_type = project_config.option<ConfigOptionStrings>("filament_colour_type");
     ConfigOptionInts *   filament_map = project_config.option<ConfigOptionInts>("filament_map");
     ConfigOptionInts *   filament_volume_map = project_config.option<ConfigOptionInts>("filament_volume_map");
-
     // Snapshot and temporarily strip mixed filament slots so AMS sync operates on physical
     // filaments only. A mixed slot is virtual and has no tray to sync against; leaving it in
     // would let AMS mapping overwrite it and would break the physical-first slot ordering the
@@ -4256,9 +4273,21 @@ std::vector<std::vector<DynamicPrintConfig>> PresetBundle::get_extruder_filament
     return filament_infos;
 }
 
-// ORCA TODO: currently, this function assumes the printer name follows the pattern of "<printer_model> <nozzle_diameter>", e.g.
-// printer_type: "Bambu Lab X2D", nozzle_diameter_str: "0.4 nozzle" => printer_name: "Bambu Lab X2D 0.4 nozzle". If the printer name does
-// not follow this pattern, the function may not work correctly.
+std::string PresetBundle::get_printer_model_display_name(const std::string &model_id) const
+{
+    if (model_id.empty())
+        return {};
+    for (const auto &vendor_entry : vendors) {
+        for (const auto &model : vendor_entry.second.models) {
+            if (model.model_id == model_id)
+                return model.name;
+        }
+    }
+    return {};
+}
+
+// ORCA TODO: this assumes printer names follow "<printer_model> <nozzle_diameter>", e.g.
+// "Bambu Lab X2D 0.4 nozzle". Other naming schemes may not resolve correctly.
 std::set<std::string> PresetBundle::get_printer_names_by_printer_type_and_nozzle(const std::string &printer_type, std::string nozzle_diameter_str, bool system_only)
 {
     std::set<std::string> printer_names;
@@ -4280,7 +4309,9 @@ std::set<std::string> PresetBundle::get_printer_names_by_printer_type_and_nozzle
         if (printer_it->name.find(nozzle_diameter_str) != std::string::npos) printer_names.insert(printer_it->name);
     }
 
-    assert(printer_names.size() == 1);
+    // No match is normal for a connected machine the user has not installed; only an
+    // ambiguous match is a bug (the caller assumes one preset per model and nozzle).
+    assert(printer_names.size() <= 1);
 
     for (auto& printer_name : printer_names) {
         BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << " " << __LINE__ << " printer name: " << printer_name;
@@ -4293,8 +4324,8 @@ std::vector<Preset *> PresetBundle::get_filament_presets_for_machine(const std::
                                                                     const std::string &nozzle_diameter_str,
                                                                     bool               include_user_presets)
 {
-    // Printer model plus nozzle diameter is expected to resolve to a single system printer preset;
-    // get_printer_names_by_printer_type_and_nozzle asserts as much in debug builds.
+    // Printer model plus nozzle diameter normally resolves to a single system printer preset.
+    // Zero matches is normal for a connected machine the user never installed.
     const std::set<std::string> printer_names = get_printer_names_by_printer_type_and_nozzle(printer_type, nozzle_diameter_str);
     const Preset *printer = printer_names.empty() ? nullptr : printers.find_preset(*printer_names.begin());
     if (printer == nullptr)

src/libslic3r/PresetBundle.hpp

@@ -391,6 +391,9 @@ public:
 
     std::vector<std::vector<DynamicPrintConfig>> get_extruder_filament_info() const;
 
+    // Resolve a vendor model id (an agent-reported machine identity) to the display name
+    // printer profiles use as printer_model. Empty when no loaded vendor declares it.
+    std::string get_printer_model_display_name(const std::string &model_id) const;
     std::set<std::string> get_printer_names_by_printer_type_and_nozzle(const std::string &printer_type, std::string nozzle_diameter_str, bool system_only = true);
     // Orca: the root filament presets a connected machine can use, resolved with the rule the rest
     // of the app applies (is_compatible_with_printer): an empty compatible_printers means every

src/slic3r/CMakeLists.txt

@@ -236,6 +236,7 @@ set(SLIC3R_GUI_SOURCES
     GUI/GLToolbar.hpp
     GUI/ImageDPIFrame.cpp
     GUI/ImageDPIFrame.hpp
+    GUI/IMediaController.hpp
     GUI/GUI_App.cpp
     GUI/GUI_App.hpp
     GUI/GUI_AuxiliaryList.cpp
@@ -286,8 +287,6 @@ set(SLIC3R_GUI_SOURCES
     GUI/FilamentMapDialog.hpp
     GUI/IconManager.cpp
     GUI/IconManager.hpp
-    GUI/IdleScheduler.cpp
-    GUI/IdleScheduler.hpp
     GUI/ImageGrid.cpp
     GUI/ImageGrid.h
     GUI/ImGuiWrapper.cpp
@@ -349,10 +348,6 @@ set(SLIC3R_GUI_SOURCES
     GUI/KBShortcutsDialog.hpp
     GUI/KeyChord.cpp
     GUI/KeyChord.hpp
-    GUI/Lazy.cpp
-    GUI/Lazy.hpp
-    GUI/LazyPage.cpp
-    GUI/LazyPage.hpp
     GUI/LibVGCode/LibVGCodeWrapper.hpp
     GUI/LibVGCode/LibVGCodeWrapper.cpp
     GUI/LinuxDisplayBackend.cpp
@@ -365,6 +360,8 @@ set(SLIC3R_GUI_SOURCES
     GUI/MediaFilePanel.h
     GUI/MediaPlayCtrl.cpp
     GUI/MediaPlayCtrl.h
+    GUI/WebRtcMediaController.cpp
+    GUI/WebRtcMediaController.hpp
     GUI/MeshUtils.cpp
     GUI/MeshUtils.hpp
     GUI/ModelMall.cpp
@@ -439,7 +436,6 @@ set(SLIC3R_GUI_SOURCES
     GUI/Plater.hpp
     GUI/PlateSettingsDialog.cpp
     GUI/PlateSettingsDialog.hpp
-    GUI/PrebuildQueue.hpp
     GUI/Preferences.cpp
     GUI/Preferences.hpp
     GUI/PresetBundleDialog.cpp
@@ -519,7 +515,6 @@ set(SLIC3R_GUI_SOURCES
     GUI/SliceInfoPanel.hpp
     GUI/SlicingProgressNotification.cpp
     GUI/SlicingProgressNotification.hpp
-    GUI/StagedBuild.hpp
     GUI/StatusPanel.cpp
     GUI/StatusPanel.hpp
     GUI/StepMeshDialog.cpp
@@ -560,6 +555,8 @@ set(SLIC3R_GUI_SOURCES
     GUI/WebUserLoginDialog.hpp
     GUI/WebViewDialog.cpp
     GUI/WebViewDialog.hpp
+    GUI/WebMediaController.hpp
+    GUI/WebMediaController.cpp
     GUI/Widgets/AMSControl.cpp
     GUI/Widgets/AMSControl.hpp
     GUI/Widgets/AMSItem.cpp
@@ -754,10 +751,15 @@ set(SLIC3R_GUI_SOURCES
     Utils/NetworkAgentFactory.cpp
     Utils/ICloudServiceAgent.hpp
     Utils/IPrinterAgent.hpp
+    Utils/ICameraSignalingChannel.hpp
     Utils/OrcaCloudServiceAgent.cpp
     Utils/OrcaCloudServiceAgent.hpp
+    Utils/OrcaMqttConnection.cpp
+    Utils/OrcaMqttConnection.hpp
     Utils/OrcaPrinterAgent.cpp
     Utils/OrcaPrinterAgent.hpp
+    Utils/OrcaCloudSignalingChannel.cpp
+    Utils/OrcaCloudSignalingChannel.hpp
     Utils/QidiPrinterAgent.cpp
     Utils/QidiPrinterAgent.hpp
     Utils/SnapmakerPrinterAgent.cpp
@@ -898,7 +900,7 @@ target_include_directories(libslic3r_gui PRIVATE Utils ${CMAKE_CURRENT_BINARY_DI
 
 if (WIN32)
     target_include_directories(libslic3r_gui SYSTEM PRIVATE ${CMAKE_CURRENT_SOURCE_DIR}/../../deps/WebView2/include)
-    target_link_libraries(libslic3r_gui Advapi32)
+    target_link_libraries(libslic3r_gui Advapi32 Crypt32)
 endif()
 
 source_group(TREE ${CMAKE_CURRENT_SOURCE_DIR} FILES ${SLIC3R_GUI_SOURCES})
@@ -924,7 +926,7 @@ else()
     set(_opengl_link_lib OpenGL::GL)
 endif()
 
-target_link_libraries(libslic3r_gui libslic3r cereal::cereal imgui imguizmo minilzo libvgcode md4c-html glad ${_opengl_link_lib} hidapi mdns ${wxWidgets_LIBRARIES} glfw libcurl OpenSSL::SSL OpenSSL::Crypto noise::noise pybind11::embed)
+target_link_libraries(libslic3r_gui libslic3r cereal::cereal imgui imguizmo minilzo libvgcode md4c-html glad ${_opengl_link_lib} hidapi mdns ${wxWidgets_LIBRARIES} glfw libcurl OpenSSL::SSL OpenSSL::Crypto LibDataChannel::LibDataChannel noise::noise pybind11::embed)
 
 if (CMAKE_SYSTEM_NAME STREQUAL "Linux")
     # Linux finds wxWidgets in module mode, whose include dirs and definitions
@@ -981,29 +983,32 @@ endif ()
 
 if (APPLE)
     # Static FFmpeg from the deps install: nothing to bundle into the .app,
-    # no rpath/install_name handling. Order matters: avcodec -> swscale -> avutil.
+    # no rpath/install_name handling. Order matters: avformat -> avcodec -> swscale -> avutil.
+    find_library(LIBAVFORMAT_LIBRARY NAMES libavformat.a PATHS ${CMAKE_PREFIX_PATH}/lib NO_DEFAULT_PATH)
     find_library(LIBAVCODEC_LIBRARY NAMES libavcodec.a PATHS ${CMAKE_PREFIX_PATH}/lib NO_DEFAULT_PATH)
     find_library(LIBSWSCALE_LIBRARY NAMES libswscale.a PATHS ${CMAKE_PREFIX_PATH}/lib NO_DEFAULT_PATH)
     find_library(LIBAVUTIL_LIBRARY NAMES libavutil.a PATHS ${CMAKE_PREFIX_PATH}/lib NO_DEFAULT_PATH)
-    if (NOT LIBAVCODEC_LIBRARY OR NOT LIBSWSCALE_LIBRARY OR NOT LIBAVUTIL_LIBRARY)
-        message(FATAL_ERROR "Static FFmpeg (libavcodec.a/libswscale.a/libavutil.a) not found under ${CMAKE_PREFIX_PATH}/lib. Rebuild the deps — FFMPEG builds static-only on macOS.")
+    if (NOT LIBAVFORMAT_LIBRARY OR NOT LIBAVCODEC_LIBRARY OR NOT LIBSWSCALE_LIBRARY OR NOT LIBAVUTIL_LIBRARY)
+        message(FATAL_ERROR "Static FFmpeg (libavformat.a/libavcodec.a/libswscale.a/libavutil.a) not found under ${CMAKE_PREFIX_PATH}/lib. Rebuild the deps — FFMPEG builds static-only on macOS.")
     endif ()
-    target_link_libraries(libslic3r_gui ${LIBAVCODEC_LIBRARY} ${LIBSWSCALE_LIBRARY} ${LIBAVUTIL_LIBRARY})
+    target_link_libraries(libslic3r_gui ${LIBAVFORMAT_LIBRARY} ${LIBAVCODEC_LIBRARY} ${LIBSWSCALE_LIBRARY} ${LIBAVUTIL_LIBRARY})
     target_include_directories(libslic3r_gui SYSTEM PRIVATE ${CMAKE_PREFIX_PATH}/include)
 elseif (WIN32)
     # Prebuilt shared FFmpeg from the deps install. Windows has no pkg-config,
     # so resolve the import libraries out of the deps prefix directly; the DLLs
     # are copied next to the executable by the top level CMakeLists.
+    find_library(LIBAVFORMAT_LIBRARY NAMES avformat PATHS ${CMAKE_PREFIX_PATH}/lib NO_DEFAULT_PATH)
     find_library(LIBAVCODEC_LIBRARY NAMES avcodec PATHS ${CMAKE_PREFIX_PATH}/lib NO_DEFAULT_PATH)
     find_library(LIBSWSCALE_LIBRARY NAMES swscale PATHS ${CMAKE_PREFIX_PATH}/lib NO_DEFAULT_PATH)
     find_library(LIBAVUTIL_LIBRARY NAMES avutil PATHS ${CMAKE_PREFIX_PATH}/lib NO_DEFAULT_PATH)
-    if (NOT LIBAVCODEC_LIBRARY OR NOT LIBSWSCALE_LIBRARY OR NOT LIBAVUTIL_LIBRARY)
-        message(FATAL_ERROR "FFmpeg (avcodec/swscale/avutil) not found under ${CMAKE_PREFIX_PATH}/lib. Rebuild the deps.")
+    if (NOT LIBAVFORMAT_LIBRARY OR NOT LIBAVCODEC_LIBRARY OR NOT LIBSWSCALE_LIBRARY OR NOT LIBAVUTIL_LIBRARY)
+        message(FATAL_ERROR "FFmpeg (avformat/avcodec/swscale/avutil) not found under ${CMAKE_PREFIX_PATH}/lib. Rebuild the deps.")
     endif ()
-    target_link_libraries(libslic3r_gui ${LIBAVCODEC_LIBRARY} ${LIBSWSCALE_LIBRARY} ${LIBAVUTIL_LIBRARY})
+    target_link_libraries(libslic3r_gui ${LIBAVFORMAT_LIBRARY} ${LIBAVCODEC_LIBRARY} ${LIBSWSCALE_LIBRARY} ${LIBAVUTIL_LIBRARY})
     target_include_directories(libslic3r_gui SYSTEM PRIVATE ${CMAKE_PREFIX_PATH}/include)
 else ()
     pkg_check_modules(LIBAV REQUIRED IMPORTED_TARGET
+        libavformat
         libavcodec
         libswscale
         libavutil

src/slic3r/GUI/AMSDryControl.cpp

@@ -7,6 +7,7 @@
 #include "slic3r/GUI/DeviceCore/DevExtruderSystem.h"
 
 #include "slic3r/GUI/DeviceCore/DevManager.h"
+#include "slic3r/GUI/DeviceManager.hpp"
 
 #include "slic3r/GUI/MsgDialog.hpp"
 
@@ -1602,8 +1603,16 @@ int AMSDryCtrWin::update_filament_list(DevAms* dev_ams, MachineObject* obj)
         stream << std::fixed << std::setprecision(1) << obj->GetExtderSystem()->GetNozzleDiameter(extruder_id);
         std::string nozzle_diameter_str = stream.str();
 
+        // The connected device's model may not resolve (OrcaSonar's is optional); the
+        // helper falls back to the selected profile so the list is never empty.
+        const std::string filament_printer_model = resolve_filament_printer_model(obj->printer_type, preset_bundle);
+        if (filament_printer_model.empty()) {
+            BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << " cannot resolve a printer model for the filament list";
+            return false;
+        }
+
         for (Preset *filament_it : preset_bundle->get_filament_presets_for_machine(
-                 DevPrinterConfigUtil::get_printer_display_name(obj->printer_type), nozzle_diameter_str, obj->is_support_user_preset)) {
+                 filament_printer_model, nozzle_diameter_str, obj->is_support_user_preset)) {
             if (!filament_id_set.insert(filament_it->filament_id).second)
                 continue;
             const std::string filament_alias = filaments.get_preset_alias(*filament_it, true);

src/slic3r/GUI/AMSMaterialsSetting.cpp

@@ -431,6 +431,11 @@ void AMSMaterialsSetting::update_filament_editing(bool is_printing)
         m_button_confirm->Show(true);
     }
 
+    // A third-party tray owns its temp range; BBL RFID trays keep the read-only preset values.
+    const bool can_edit = !is_printing || obj->is_support_filament_setting_inprinting;
+    m_input_nozzle_min->Enable(m_is_third && can_edit);
+    m_input_nozzle_max->Enable(m_is_third && can_edit);
+
     if (!m_is_third) {
         m_tip_readonly->SetLabelText(wxEmptyString);
         m_tip_readonly->Hide();
@@ -453,6 +458,8 @@ void AMSMaterialsSetting::update_filament_editing(bool is_printing)
     if (m_view_only) { // Orca: view-only (2D laser/cut) — lock every edit control and hide apply/reset
         m_comboBox_filament->Enable(false);
         m_comboBox_cali_result->Enable(false);
+        m_input_nozzle_min->Enable(false);
+        m_input_nozzle_max->Enable(false);
         m_input_k_val->Enable(false);
         m_input_n_val->Enable(false);
         m_button_confirm->Hide();
@@ -502,7 +509,7 @@ void AMSMaterialsSetting::on_select_reset(wxCommandEvent& event) {
         }
 
         // set k / n value
-        if (obj->cali_version <= -1 && obj->get_printer_series() == PrinterSeries::SERIES_P1P) {
+        if (obj->supports_extrusion_cali() && obj->cali_version <= -1 && obj->get_printer_series() == PrinterSeries::SERIES_P1P) {
             // set extrusion cali ratio
             int cali_tray_id = ams_id * 4 + slot_id;
 
@@ -523,7 +530,7 @@ void AMSMaterialsSetting::on_select_reset(wxCommandEvent& event) {
             }
             obj->command_extrusion_cali_set(cali_tray_id, "", "", k, n);
         }
-        else {
+        else if (obj->supports_extrusion_cali()) {
             PACalibIndexInfo select_index_info;
             int tray_id = ams_id * 4 + slot_id;
             if (is_virtual_tray()) {
@@ -705,7 +712,7 @@ void AMSMaterialsSetting::on_select_ok(wxCommandEvent &event)
     wxString k_text = m_input_k_val->GetTextCtrl()->GetValue();
     wxString n_text = m_input_n_val->GetTextCtrl()->GetValue();
 
-    if (obj->cali_version <= -1 && (obj->get_printer_series() != PrinterSeries::SERIES_X1) && !ExtrusionCalibration::check_k_validation(k_text)) {
+    if (obj->supports_extrusion_cali() && obj->cali_version <= -1 && (obj->get_printer_series() != PrinterSeries::SERIES_X1) && !ExtrusionCalibration::check_k_validation(k_text)) {
         wxString k_tips = wxString::Format(_L("Please input a valid value (K in %.1f~%.1f)"), MIN_PA_K_VALUE, MAX_PA_K_VALUE);
         wxString kn_tips = wxString::Format(_L("Please input a valid value (K in %.1f~%.1f, N in %.1f~%.1f)"), MIN_PA_K_VALUE, MAX_PA_K_VALUE, 0.6, 2.0);
         MessageDialog msg_dlg(nullptr, k_tips, wxEmptyString, wxICON_WARNING | wxOK);
@@ -735,7 +742,7 @@ void AMSMaterialsSetting::on_select_ok(wxCommandEvent &event)
             vt_tray = VIRTUAL_TRAY_DEPUTY_ID;
         }
 
-        if (obj->cali_version >= 0) {
+        if (obj->supports_extrusion_cali() && obj->cali_version >= 0) {
             PACalibIndexInfo select_index_info;
             select_index_info.tray_id = vt_tray;
             select_index_info.ams_id = ams_id;
@@ -754,7 +761,7 @@ void AMSMaterialsSetting::on_select_ok(wxCommandEvent &event)
 
             CalibUtils::select_PA_calib_result(select_index_info);
         }
-        else {
+        else if (obj->supports_extrusion_cali()) {
             obj->command_extrusion_cali_set(vt_tray, "", "", k, n);
         }
     }
@@ -776,7 +783,7 @@ void AMSMaterialsSetting::on_select_ok(wxCommandEvent &event)
             ;
         }
 
-        if (obj->cali_version >= 0) {
+        if (obj->supports_extrusion_cali() && obj->cali_version >= 0) {
             PACalibIndexInfo select_index_info;
             select_index_info.tray_id = cali_tray_id;
             select_index_info.ams_id = ams_id;
@@ -795,7 +802,7 @@ void AMSMaterialsSetting::on_select_ok(wxCommandEvent &event)
 
             CalibUtils::select_PA_calib_result(select_index_info);
         }
-        else {
+        else if (obj->supports_extrusion_cali()) {
             obj->command_extrusion_cali_set(cali_tray_id, "", "", k, n);
         }
     }
@@ -891,7 +898,12 @@ bool AMSMaterialsSetting::is_virtual_tray()
 
 void AMSMaterialsSetting::update_widgets()
 {
-    if (obj && obj->get_printer_series() == PrinterSeries::SERIES_X1 && obj->cali_version <= -1) {
+    if (obj && !obj->supports_extrusion_cali()) {
+        // No printer-side K/N records: do not offer them.
+        m_panel_normal->Show();
+        m_panel_kn->Hide();
+    }
+    else if (obj && obj->get_printer_series() == PrinterSeries::SERIES_X1 && obj->cali_version <= -1) {
         // Low version firmware does not display k value
         m_panel_kn->Hide();
     }
@@ -952,6 +964,9 @@ void AMSMaterialsSetting::Popup(wxString filament, wxString sn, wxString temp_mi
 
     m_input_k_val->GetTextCtrl()->SetValue(k);
     m_input_n_val->GetTextCtrl()->SetValue(n);
+    // Tray values are re-supplied by every caller; clear so a previous popup cannot leak in.
+    m_input_nozzle_min->GetTextCtrl()->SetValue(wxEmptyString);
+    m_input_nozzle_max->GetTextCtrl()->SetValue(wxEmptyString);
 
     wxArrayString filament_items;
     wxString bambu_filament_name;
@@ -975,11 +990,14 @@ void AMSMaterialsSetting::Popup(wxString filament, wxString sn, wxString temp_mi
     }
     stream << std::fixed << std::setprecision(1) << machine_diameter;
     std::string nozzle_diameter_str = stream.str();
+    // OrcaSonar's model id is optional, so the device model alone can resolve to nothing;
+    // the helper falls back to the selected profile so the dropdown is never empty.
+    const std::string filament_printer_model = resolve_filament_printer_model(obj->printer_type, preset_bundle);
 
-    if (preset_bundle) {
+    if (preset_bundle && !filament_printer_model.empty()) {
         BOOST_LOG_TRIVIAL(trace) << "system_preset_bundle filament number=" << preset_bundle->filaments.size();
         for (Preset *filament_it : preset_bundle->get_filament_presets_for_machine(
-                 DevPrinterConfigUtil::get_printer_display_name(obj->printer_type), nozzle_diameter_str, obj->is_support_user_preset)) {
+                 filament_printer_model, nozzle_diameter_str, obj->is_support_user_preset)) {
             if (!filament_id_set.insert(filament_it->filament_id).second)
                 continue;
             const std::string alias = preset_bundle->filaments.get_preset_alias(*filament_it, true);
@@ -1045,6 +1063,12 @@ void AMSMaterialsSetting::Popup(wxString filament, wxString sn, wxString temp_mi
         else {
             m_comboBox_filament->Show();
             m_readonly_filament->Hide();
+            // A printer-set tray carries its own temps; the preset selection only fills
+            // them when the tray has none.
+            if (!temp_min.IsEmpty() && temp_min != "0")
+                m_input_nozzle_min->GetTextCtrl()->SetValue(temp_min);
+            if (!temp_max.IsEmpty() && temp_max != "0")
+                m_input_nozzle_max->GetTextCtrl()->SetValue(temp_max);
         }
 
         if (obj->cali_version >= 0) {
@@ -1181,7 +1205,12 @@ void AMSMaterialsSetting::Popup(wxString filament, wxString sn, wxString temp_mi
         }
     }
 
+    if (filament_items.IsEmpty())
+        BOOST_LOG_TRIVIAL(warning) << "ams_materials_setting: no filament presets for printer model \""
+                                   << filament_printer_model << "\" at nozzle " << nozzle_diameter_str;
+
     m_comboBox_filament->Set(filament_items);
+    m_comboBox_from_printer = true;
     m_comboBox_filament->SetSelection(selection_idx);
     post_select_event(selection_idx);
 
@@ -1189,9 +1218,6 @@ void AMSMaterialsSetting::Popup(wxString filament, wxString sn, wxString temp_mi
         m_comboBox_filament->SetValue(wxEmptyString);
     }
 
-    // Set the flag whether to open the filament setting dialog from the device page
-    m_comboBox_filament->SetClientData(new int(1));
-
     update();
     Layout();
     Fit();
@@ -1220,49 +1246,52 @@ void AMSMaterialsSetting::on_select_cali_result(wxCommandEvent &evt)
 
 void AMSMaterialsSetting::on_select_filament(wxCommandEvent &evt)
 {
-    // Get the flag whether to open the filament setting dialog from the device page
-    int* from_printer = static_cast<int*>(m_comboBox_filament->GetClientData());
+    // True for the popup's own initial selection: the dialog pre-filled the tray's
+    // temps, so the matching preset must not overwrite them.
+    const bool initial_printer_selection = m_comboBox_from_printer;
 
     m_filament_type = "";
     PresetBundle* preset_bundle = wxGetApp().preset_bundle;
+    std::string filament_printer_model;
     if (preset_bundle) {
         std::ostringstream stream;
         if (obj) {
-            // Defensive: this dialog is opened only from StatusPanel (BBL-only) today, so the fallback fires
-            // only during the brief BBL startup window before firmware reports nozzle info. Without this,
-            // the "0.0" lookup string returns an empty set and filament lookup yields no results.
+            // Use the selected profile's nozzle diameter until the connected device reports one.
             float machine_diameter = obj->GetExtderSystem()->GetNozzleDiameter(0);
             if (machine_diameter == 0.0f) {
                 const ConfigOption *opt = preset_bundle->printers.get_selected_preset().config.option("nozzle_diameter");
                 if (opt) machine_diameter = static_cast<const ConfigOptionFloats *>(opt)->values[0];
             }
             stream << std::fixed << std::setprecision(1) << machine_diameter;
+            filament_printer_model = resolve_filament_printer_model(obj->printer_type, preset_bundle);
         }
         std::string nozzle_diameter_str = stream.str();
         // Resolve the selection against the same list Popup() built the dropdown from, so the two
         // halves of the dialog cannot disagree about which filaments this machine can use.
         const std::string selected = m_comboBox_filament->GetValue().ToStdString();
-        if (!selected.empty()) {
+        if (!selected.empty() && !filament_printer_model.empty()) {
             const std::string filament_id = map_filament_items[selected].filament_id;
             for (Preset *it : preset_bundle->get_filament_presets_for_machine(
-                     DevPrinterConfigUtil::get_printer_display_name(obj->printer_type), nozzle_diameter_str, obj->is_support_user_preset)) {
+                     filament_printer_model, nozzle_diameter_str, obj->is_support_user_preset)) {
                 if (it->filament_id != filament_id)
                     continue;
-                // ) if nozzle_temperature_range is found
-                ConfigOption* opt_min = it->config.option("nozzle_temperature_range_low");
-                if (opt_min) {
-                    ConfigOptionInts* opt_min_ints = dynamic_cast<ConfigOptionInts*>(opt_min);
-                    if (opt_min_ints) {
-                        wxString text_nozzle_temp_min = wxString::Format("%d", opt_min_ints->get_at(0));
-                        m_input_nozzle_min->GetTextCtrl()->SetValue(text_nozzle_temp_min);
+                if (!initial_printer_selection) {
+                    // ) if nozzle_temperature_range is found
+                    ConfigOption* opt_min = it->config.option("nozzle_temperature_range_low");
+                    if (opt_min) {
+                        ConfigOptionInts* opt_min_ints = dynamic_cast<ConfigOptionInts*>(opt_min);
+                        if (opt_min_ints) {
+                            wxString text_nozzle_temp_min = wxString::Format("%d", opt_min_ints->get_at(0));
+                            m_input_nozzle_min->GetTextCtrl()->SetValue(text_nozzle_temp_min);
+                        }
                     }
-                }
-                ConfigOption* opt_max = it->config.option("nozzle_temperature_range_high");
-                if (opt_max) {
-                    ConfigOptionInts* opt_max_ints = dynamic_cast<ConfigOptionInts*>(opt_max);
-                    if (opt_max_ints) {
-                        wxString text_nozzle_temp_max = wxString::Format("%d", opt_max_ints->get_at(0));
-                        m_input_nozzle_max->GetTextCtrl()->SetValue(text_nozzle_temp_max);
+                    ConfigOption* opt_max = it->config.option("nozzle_temperature_range_high");
+                    if (opt_max) {
+                        ConfigOptionInts* opt_max_ints = dynamic_cast<ConfigOptionInts*>(opt_max);
+                        if (opt_max_ints) {
+                            wxString text_nozzle_temp_max = wxString::Format("%d", opt_max_ints->get_at(0));
+                            m_input_nozzle_max->GetTextCtrl()->SetValue(text_nozzle_temp_max);
+                        }
                     }
                 }
                 ConfigOption* opt_type = it->config.option("filament_type");
@@ -1301,13 +1330,16 @@ void AMSMaterialsSetting::on_select_filament(wxCommandEvent &evt)
         m_button_confirm->Disable(); // ORCA No need to change style
         m_comboBox_cali_result->Clear();
         m_comboBox_cali_result->SetValue(wxEmptyString);
-        m_input_k_val->GetTextCtrl()->SetValue(wxEmptyString);
-        m_input_n_val->GetTextCtrl()->SetValue(wxEmptyString);
-        m_comboBox_filament->SetClientData(new int(0));
+        if (!initial_printer_selection) {
+            m_input_k_val->GetTextCtrl()->SetValue(wxEmptyString);
+            m_input_n_val->GetTextCtrl()->SetValue(wxEmptyString);
+        }
+        m_comboBox_from_printer = false;
         return;
     }
     else {
-        m_button_confirm->Enable(true);  // ORCA No need to change style
+        if (!m_view_only)
+            m_button_confirm->Enable(true);  // ORCA No need to change style
     }
 
     //filament id
@@ -1331,6 +1363,9 @@ void AMSMaterialsSetting::on_select_filament(wxCommandEvent &evt)
         }
     }
 
+    if (!ams_filament_id.empty())
+        m_clr_picker->is_empty(false);
+
     wxArrayString items;
     m_pa_profile_items.clear();
     m_comboBox_cali_result->SetValue(wxEmptyString);
@@ -1386,7 +1421,7 @@ void AMSMaterialsSetting::on_select_filament(wxCommandEvent &evt)
 
         m_comboBox_cali_result->Set(items);
         if (ams_id == VIRTUAL_TRAY_MAIN_ID || ams_id == VIRTUAL_TRAY_DEPUTY_ID) {
-            if (from_printer && (*from_printer == 1)) {
+            if (initial_printer_selection) {
                 for (auto slot : obj->vt_slot) {
                     if (slot.id == std::to_string(ams_id))
                         cali_select_idx = CalibUtils::get_selected_calib_idx(m_pa_profile_items, slot.cali_idx);
@@ -1403,10 +1438,11 @@ void AMSMaterialsSetting::on_select_filament(wxCommandEvent &evt)
             }
         }
         else {
-            if (from_printer && (*from_printer == 1)) {
+            if (initial_printer_selection) {
                 DevAmsTray* selected_tray = this->obj->GetFilaSystem()->GetAmsTray(std::to_string(ams_id), std::to_string(slot_id));
                 if (!selected_tray)
                 {
+                    m_comboBox_from_printer = false;
                     return;
                 }
 
@@ -1437,7 +1473,7 @@ void AMSMaterialsSetting::on_select_filament(wxCommandEvent &evt)
     else {
         if (!ams_filament_id.empty()) {
             //m_input_k_val->GetTextCtrl()->SetValue("0.00");
-            m_input_k_val->Enable(true);
+            m_input_k_val->Enable(!m_view_only);
         }
         else {
             //m_input_k_val->GetTextCtrl()->SetValue("0.00");
@@ -1445,7 +1481,7 @@ void AMSMaterialsSetting::on_select_filament(wxCommandEvent &evt)
         }
     }
 
-    m_comboBox_filament->SetClientData(new int(0));
+    m_comboBox_from_printer = false;
 }
 
 void AMSMaterialsSetting::on_dpi_changed(const wxRect &suggested_rect)

src/slic3r/GUI/AMSMaterialsSetting.hpp

@@ -122,7 +122,7 @@ public:
     std::string    ams_filament_id;
     std::string    ams_setting_id;
 
-    bool           m_is_third;
+    bool           m_is_third = false;
     // Orca: view-only mode (laser/cut). When set, the dialog is inspectable but every
     // editing control is disabled and no command is sent.
     bool           m_view_only = false;
@@ -182,6 +182,9 @@ protected:
     wxStaticText*       m_n_param;
     TextInput*          m_input_n_val;
     int                 m_filament_selection;
+    // True while the popup's initial, printer-driven selection is being handled; it
+    // keeps that selection from overwriting the tray's own temps with preset temps.
+    bool                m_comboBox_from_printer = false;
 
     int m_pa_cali_select_id = 0;
 

src/slic3r/GUI/AVVideoDecoder.cpp

@@ -45,6 +45,25 @@ int AVVideoDecoder::open(Bambu_StreamInfo const &info)
     return 0;
 }
 
+int AVVideoDecoder::open(AVCodecParameters const &parameters)
+{
+    if (avcodec_parameters_to_context(codec_ctx_, &parameters) < 0)
+        return -1;
+
+    auto codec = avcodec_find_decoder(codec_ctx_->codec_id);
+    if (codec == nullptr) {
+        fprintf(stderr, "AVVideoDecoder: unsupported codec!\n");
+        return -1;
+    }
+    if (avcodec_open2(codec_ctx_, codec, nullptr) < 0) {
+        fprintf(stderr, "AVVideoDecoder: could not open codec\n");
+        return -1;
+    }
+
+    frame_ = av_frame_alloc();
+    return frame_ == nullptr ? -1 : 0;
+}
+
 int AVVideoDecoder::decode(const Bambu_Sample &sample)
 {
     int ret = -1;
@@ -71,6 +90,14 @@ int AVVideoDecoder::decode(const Bambu_Sample &sample)
     return ret;
 }
 
+int AVVideoDecoder::decode(const AVPacket &packet)
+{
+    int ret = avcodec_send_packet(codec_ctx_, &packet);
+    if (ret == 0)
+        got_frame_ = avcodec_receive_frame(codec_ctx_, frame_) == 0;
+    return ret;
+}
+
 int AVVideoDecoder::flush()
 {
     int ret = avcodec_send_packet(codec_ctx_, nullptr);

src/slic3r/GUI/AVVideoDecoder.hpp

@@ -23,8 +23,10 @@ public:
 
 public:
     int  open(Bambu_StreamInfo const &info);
+    int  open(AVCodecParameters const &parameters);
 
     int  decode(Bambu_Sample const &sample);
+    int  decode(AVPacket const &packet);
 
     int  flush();
 
@@ -34,6 +36,14 @@ public:
 
     bool toWxBitmap(wxBitmap &bitmap, wxSize const & size);
 
+    // Native size of the most recently decoded frame, or an unspecified size if
+    // nothing has decoded yet. Lets a caller learn the video dimensions when the
+    // container/probe could not report them up front.
+    wxSize decoded_frame_size() const
+    {
+        return got_frame_ && frame_ ? wxSize{frame_->width, frame_->height} : wxSize{};
+    }
+
 private:
     AVCodecContext *codec_ctx_ = nullptr;
     AVFrame *       frame_     = nullptr;

src/slic3r/GUI/Auxiliary.cpp

@@ -863,27 +863,17 @@ void AuxiliaryPanel::init_tabpanel()
     m_tabpanel->SetBackgroundColour(wxColour("#FEFFFF"));
     m_tabpanel->Bind(wxEVT_BOOKCTRL_PAGE_CHANGED, [](wxBookCtrlEvent &e) { /* Event handling */ });
 
-    add_build_step([this] {
-        m_designer_panel = new DesignerPanel(m_tabpanel, AuxiliaryFolderType::DESIGNER);
-        m_tabpanel->AddPage(m_designer_panel, _L("Basic Info"), true);
-    });
-    add_build_step([this] {
-        m_pictures_panel = new AuFolderPanel(m_tabpanel, AuxiliaryFolderType::MODEL_PICTURE);
-        m_tabpanel->AddPage(m_pictures_panel, _L("Pictures"), false);
-    });
-    add_build_step([this] {
-        m_bill_of_materials_panel = new AuFolderPanel(m_tabpanel, AuxiliaryFolderType::BILL_OF_MATERIALS);
-        m_tabpanel->AddPage(m_bill_of_materials_panel, _L("Bill of Materials"), false);
-    });
-    add_build_step([this] {
-        m_assembly_panel = new AuFolderPanel(m_tabpanel, AuxiliaryFolderType::ASSEMBLY_GUIDE);
-        m_tabpanel->AddPage(m_assembly_panel, _L("Assembly Guide"), false);
-    });
-    add_build_step([this] {
-        m_others_panel = new AuFolderPanel(m_tabpanel, AuxiliaryFolderType::OTHERS);
-        m_tabpanel->AddPage(m_others_panel, _L("Others"), false);
-        Layout();
-    });
+    m_designer_panel          = new DesignerPanel(m_tabpanel, AuxiliaryFolderType::DESIGNER);
+    m_pictures_panel          = new AuFolderPanel(m_tabpanel, AuxiliaryFolderType::MODEL_PICTURE);
+    m_bill_of_materials_panel = new AuFolderPanel(m_tabpanel, AuxiliaryFolderType::BILL_OF_MATERIALS);
+    m_assembly_panel          = new AuFolderPanel(m_tabpanel, AuxiliaryFolderType::ASSEMBLY_GUIDE);
+    m_others_panel            = new AuFolderPanel(m_tabpanel, AuxiliaryFolderType::OTHERS);
+
+    m_tabpanel->AddPage(m_designer_panel, _L("Basic Info"), true);
+    m_tabpanel->AddPage(m_pictures_panel, _L("Pictures"), false);
+    m_tabpanel->AddPage(m_bill_of_materials_panel, _L("Bill of Materials"), false);
+    m_tabpanel->AddPage(m_assembly_panel, _L("Assembly Guide"), false);
+    m_tabpanel->AddPage(m_others_panel, _L("Others"), false);
 }
 
 wxWindow *AuxiliaryPanel::create_side_tools()

src/slic3r/GUI/Auxiliary.hpp

@@ -46,7 +46,6 @@
 #include "slic3r/GUI/UpgradePanel.hpp"
 #include "slic3r/GUI/AmsWidgets.hpp"
 #include "Widgets/SideTools.hpp"
-#include "StagedBuild.hpp"
 
 #define AUFILE_GREY700 wxColour(107, 107, 107)
 #define AUFILE_GREY500 wxColour(158, 158, 158)
@@ -195,7 +194,7 @@ public:
 };
 
 
-class AuxiliaryPanel : public wxPanel, public StagedBuild
+class AuxiliaryPanel : public wxPanel
 {
 private:
     Tabbook *m_tabpanel = {nullptr};

src/slic3r/GUI/CAD/DesignPanel.hpp

@@ -12,7 +12,6 @@
 
 #include "libslic3r/CAD/CadDocument.hpp"
 #include "slic3r/GUI/CAD/DesignInteraction.hpp"   // CadLevel: what one Esc press means
-#include "slic3r/GUI/Lazy.hpp"
 
 class ComboBox;    // Orca dropdown (Widgets/ComboBox.hpp) — replaces wxChoice everywhere here
 class StaticBox;   // Orca rounded card frame (Widgets/StaticBox.hpp)
@@ -47,7 +46,7 @@ class DesignCanvas;
 // Design (CAD) tab: a sketch-first, Onshape-style form-driven CAD panel.
 // Sketch and Extrude are independent tools: the user creates a Sketch first,
 // then selects it and Extrudes to produce a solid.
-class DesignPanel : public wxPanel, public LazyInstance<DesignPanel>
+class DesignPanel : public wxPanel
 {
 public:
     explicit DesignPanel(wxWindow* parent);