Merge branch 'main' into fix/gui-resource-leaks

The filament legend held its texture id in a function local static while the
loader it calls generates a new texture every time, and BitmapCache deletes none,
so a dual nozzle printer leaked one texture per filament per frame while the
preview was open, along with an SVG read and a rasterize per frame. The same
pattern sat in menu_item_with_icon. Textures are now cached on what actually
varies and released with the rest of the ImGui resources. The canvas reuses
frames by hashing the draw commands, which include the texture id, so a fresh id
every frame also kept frame skipping from ever triggering.

TriangleSelectorPatch did not release its VAO and buffers in the destructor,
so every gizmo close leaked them. The base class already issues GL deletes on
that same path, so this adds no new context requirement.

bind_event_handlers() installed three lambdas that unbind_event_handlers() could
not remove, because wx matches handlers by functor address. They are member
functions now, so bind and unbind are symmetric, and the view switch stops
stacking handlers.

The five selection dependent menus were allocated with new on every popup and
never owned. PopupMenu is synchronous and none of them is used as a submenu, so
a single owner is enough.

remove_notification_of_type stopped at the first match, so clear_all() left the
later instances of multi-instance types alive with object ids from a project that
is gone. The measure gizmo cleared its raycaster map but not the map holding one
full mesh decomposition per volume.

.github/workflows/build_all.yml

@@ -5,6 +5,7 @@ on:
     branches:
      - main
      - release/*
+     - belt-printer
     paths:
      - 'deps/**'
      - 'src/**'
@@ -261,6 +262,9 @@ jobs:
       date:
       ver:
       ver_pure:
+      # Belt-printer nightlies share the main nightly release but carry a `_belt`
+      # suffix so they never overwrite the main assets.
+      nightly_suffix: ${{ github.ref == 'refs/heads/belt-printer' && '_belt' || '' }}
     steps:
     - name: "Remove unneeded stuff to free disk space"
       run:
@@ -435,13 +439,13 @@ jobs:
         name: OrcaSlicer-Linux-flatpak_${{ env.ver }}_${{ matrix.variant.arch }}.flatpak
         path: '/__w/OrcaSlicer/OrcaSlicer/OrcaSlicer-Linux-flatpak_${{ env.ver }}_${{ matrix.variant.arch }}.flatpak'
     - name: Deploy Flatpak to nightly release
-      if: github.repository == 'OrcaSlicer/OrcaSlicer' && github.ref == 'refs/heads/main'
+      if: github.repository == 'OrcaSlicer/OrcaSlicer' && (github.ref == 'refs/heads/main' || github.ref == 'refs/heads/belt-printer')
       uses: WebFreak001/deploy-nightly@v3.2.0
       with:
         upload_url: https://uploads.github.com/repos/OrcaSlicer/OrcaSlicer/releases/137995723/assets{?name,label}
         release_id: 137995723
         asset_path: /__w/OrcaSlicer/OrcaSlicer/OrcaSlicer-Linux-flatpak_${{ env.ver }}_${{ matrix.variant.arch }}.flatpak
-        asset_name: OrcaSlicer-Linux-flatpak_nightly_${{ matrix.variant.arch }}.flatpak
+        asset_name: OrcaSlicer-Linux-flatpak_nightly${{ env.nightly_suffix }}_${{ matrix.variant.arch }}.flatpak
         asset_content_type: application/octet-stream
         max_releases: 1 # optional, if there are more releases than this matching the asset_name, the oldest ones are going to be deleted
     # The asset is /app (the exes link it at runtime) plus the build tree

.github/workflows/build_orca.yml

@@ -33,6 +33,11 @@ jobs:
       ubuntu-ver: '2404'
       ubuntu-ver-str: '_Ubuntu2404'
       ORCA_UPDATER_SIG_KEY: ${{ secrets.ORCA_UPDATER_SIG_KEY }}
+      # Branches whose builds are published to the nightly release. The
+      # belt-printer branch ships alongside main but its assets carry a `_belt`
+      # suffix (nightly_suffix) so they never overwrite the main nightly assets.
+      deploy_nightly: ${{ github.ref == 'refs/heads/main' || github.ref == 'refs/heads/belt-printer' }}
+      nightly_suffix: ${{ github.ref == 'refs/heads/belt-printer' && '_belt' || '' }}
 
     steps:
       - name: Checkout
@@ -255,7 +260,7 @@ jobs:
 
  # Thanks to RaySajuuk, it's working now
       - name: Sign app and notary
-        if: github.repository == 'OrcaSlicer/OrcaSlicer' && (github.ref == 'refs/heads/main' || startsWith(github.ref, 'refs/heads/release/')) && runner.os == 'macOS' && inputs.macos-combine-only
+        if: github.repository == 'OrcaSlicer/OrcaSlicer' && (github.ref == 'refs/heads/main' || github.ref == 'refs/heads/belt-printer' || startsWith(github.ref, 'refs/heads/release/')) && runner.os == 'macOS' && inputs.macos-combine-only
         timeout-minutes: 30
         working-directory: ${{ github.workspace }}
         env:
@@ -343,7 +348,7 @@ jobs:
           fi
 
       - name: Create DMG without notary
-        if: github.ref != 'refs/heads/main' && runner.os == 'macOS' && inputs.macos-combine-only
+        if: github.ref != 'refs/heads/main' && github.ref != 'refs/heads/belt-printer' && runner.os == 'macOS' && inputs.macos-combine-only
         working-directory: ${{ github.workspace }}
         run: |
           # Load the `retry` helper (retries flaky commands such as `hdiutil create`).
@@ -389,13 +394,13 @@ jobs:
           if-no-files-found: ignore
 
       - name: Deploy Mac release
-        if: github.repository == 'OrcaSlicer/OrcaSlicer' && github.ref == 'refs/heads/main' && runner.os == 'macOS' && inputs.macos-combine-only && !vars.SELF_HOSTED
+        if: github.repository == 'OrcaSlicer/OrcaSlicer' && env.deploy_nightly == 'true' && runner.os == 'macOS' && inputs.macos-combine-only && !vars.SELF_HOSTED
         uses: WebFreak001/deploy-nightly@v3.2.0
         with:
           upload_url: https://uploads.github.com/repos/OrcaSlicer/OrcaSlicer/releases/137995723/assets{?name,label}
           release_id: 137995723
           asset_path: ${{ github.workspace }}/OrcaSlicer_Mac_universal_${{ env.ver }}.dmg
-          asset_name: OrcaSlicer_Mac_universal_nightly.dmg
+          asset_name: OrcaSlicer_Mac_universal_nightly${{ env.nightly_suffix }}.dmg
           asset_content_type: application/octet-stream
           max_releases: 1 # optional, if there are more releases than this matching the asset_name, the oldest ones are going to be deleted
 
@@ -538,24 +543,24 @@ jobs:
           path: ${{ github.workspace }}/build/src/Release/OrcaSlicer_profile_validator.exe
 
       - name: Deploy Windows release portable
-        if: github.repository == 'OrcaSlicer/OrcaSlicer' && github.ref == 'refs/heads/main' && runner.os == 'Windows' && !vars.SELF_HOSTED
+        if: github.repository == 'OrcaSlicer/OrcaSlicer' && env.deploy_nightly == 'true' && runner.os == 'Windows' && !vars.SELF_HOSTED
         uses: WebFreak001/deploy-nightly@v3.2.0
         with:
           upload_url: https://uploads.github.com/repos/OrcaSlicer/OrcaSlicer/releases/137995723/assets{?name,label}
           release_id: 137995723
           asset_path: ${{ github.workspace }}/${{ env.BUILD_DIR }}/OrcaSlicer_Windows_${{ env.ver }}${{ env.ARCH_SUFFIX }}_portable.zip
-          asset_name: OrcaSlicer_Windows${{ env.ARCH_SUFFIX }}_nightly_portable.zip
+          asset_name: OrcaSlicer_Windows${{ env.ARCH_SUFFIX }}_nightly${{ env.nightly_suffix }}_portable.zip
           asset_content_type: application/x-zip-compressed
           max_releases: 1
 
       - name: Deploy Windows release installer
-        if: github.repository == 'OrcaSlicer/OrcaSlicer' && github.ref == 'refs/heads/main' && runner.os == 'Windows' && !vars.SELF_HOSTED
+        if: github.repository == 'OrcaSlicer/OrcaSlicer' && env.deploy_nightly == 'true' && runner.os == 'Windows' && !vars.SELF_HOSTED
         uses: WebFreak001/deploy-nightly@v3.2.0
         with:
           upload_url: https://uploads.github.com/repos/OrcaSlicer/OrcaSlicer/releases/137995723/assets{?name,label}
           release_id: 137995723
           asset_path: ${{ github.workspace }}/${{ env.BUILD_DIR }}/OrcaSlicer_Windows_Installer_${{ env.ver }}${{ env.ARCH_SUFFIX }}.exe
-          asset_name: OrcaSlicer_Windows_Installer${{ env.ARCH_SUFFIX }}_nightly.exe
+          asset_name: OrcaSlicer_Windows_Installer${{ env.ARCH_SUFFIX }}_nightly${{ env.nightly_suffix }}.exe
           asset_content_type: application/x-msdownload
           max_releases: 1
 
@@ -696,13 +701,13 @@ jobs:
           path: './build/src/dev-utils/Release/generate_system_cache'
 
       - name: Deploy Ubuntu release
-        if: ${{ github.repository == 'OrcaSlicer/OrcaSlicer' && ! env.ACT && github.ref == 'refs/heads/main' && runner.os == 'Linux' && !vars.SELF_HOSTED }}
+        if: ${{ github.repository == 'OrcaSlicer/OrcaSlicer' && ! env.ACT && env.deploy_nightly == 'true' && runner.os == 'Linux' && !vars.SELF_HOSTED }}
         uses: WebFreak001/deploy-nightly@v3.2.0
         with:
           upload_url: https://uploads.github.com/repos/OrcaSlicer/OrcaSlicer/releases/137995723/assets{?name,label}
           release_id: 137995723
           asset_path: ./build/OrcaSlicer_Linux_AppImage${{ env.ubuntu-ver-str }}${{ env.arch_suffix }}_${{ env.ver }}.AppImage
-          asset_name: OrcaSlicer_Linux_AppImage${{ env.ubuntu-ver-str }}${{ env.arch_suffix }}_nightly.AppImage
+          asset_name: OrcaSlicer_Linux_AppImage${{ env.ubuntu-ver-str }}${{ env.arch_suffix }}_nightly${{ env.nightly_suffix }}.AppImage
           asset_content_type: application/octet-stream
           max_releases: 1 # optional, if there are more releases than this matching the asset_name, the oldest ones are going to be deleted
       - name: Deploy Ubuntu release

.github/workflows/check_profiles.yml

@@ -74,26 +74,12 @@ jobs:
           set +e
           ./OrcaSlicer_profile_validator -p ${{ github.workspace }}/resources/profiles -l 2 2>&1 | tee ${{ runner.temp }}/validate_system.log
           exit ${PIPESTATUS[0]}
-      # The validator above is the nightly build of main, so it cannot slice profiles that use
-      # settings a PR adds to the engine: it reports their placeholders as undefined. A PR that
-      # changes src/ also runs Build all, whose Slice check runs this same sweep with the
-      # validator built from the PR, so the sweep below only runs for the other PRs.
-      - name: Detect engine changes
-        id: engine_changes
-        if: ${{ github.event_name == 'pull_request' }}
-        run: |
-          base=${{ github.event.pull_request.base.sha }}
-          if git fetch --no-tags --depth=1 origin "$base" && ! git diff --quiet "$base" HEAD -- src/; then
-            echo "changed=true" >> "$GITHUB_OUTPUT"
-            echo "::notice::This PR changes src/, so Build all's Slice check slices the profiles with the PR-built validator."
-          fi
       # Slice a two-colour cube through every printer, and through every system process/filament whose
       # templates no printer's own slice reaches, so every custom g-code and filename_format shipped is
       # expanded (names in {if} branches not taken included) - catches undefined-placeholder /
       # invalid-flow bugs the static checks above cannot see.
       - name: validate slice (expand custom g-code)
         id: validate_slice
-        if: ${{ steps.engine_changes.outputs.changed != 'true' }}
         continue-on-error: true
         run: |
           set +e

README.md

@@ -68,8 +68,6 @@ If you come across any of these in search results, please <b>report them</b> as
   Regular updates fueled by continuous community contributions.
 - **Wide Printer Compatibility**  
   Supports a broad range of printers: Bambu Lab, Prusa, Creality, Voron, and more.
-- **[Belt Printer Support](https://www.orcaslicer.com/wiki/belt_printing)**  
-  Slice for belt / conveyor (infinite-Z) printers, with belt-aware supports and a tilted-bed preview. Contributed by [Joseph Robertson (@HarrierPigeon)](https://github.com/HarrierPigeon).
 - Additional features can be found in the [change notes](https://github.com/OrcaSlicer/OrcaSlicer/releases/).
 
 # Wiki
@@ -91,6 +89,17 @@ Visit our GitHub Releases page for the latest stable version of OrcaSlicer, reco
 🌙 **[Download the Latest Nightly Build](https://github.com/OrcaSlicer/OrcaSlicer/releases/tag/nightly-builds)**  
 Explore the latest developments in OrcaSlicer with our nightly builds. Feedback on these versions is highly appreciated.
 
+### Belt Printer Builds
+
+The [nightly release](https://github.com/OrcaSlicer/OrcaSlicer/releases/tag/nightly-builds) ships **two parallel builds**: the standard build and a belt-printer build. Both are attached to the same release — tell them apart by the filename suffix:
+
+- **Standard** — no suffix (e.g. `OrcaSlicer_Windows_Installer_x64_nightly.exe`)
+- **Belt** — `_belt` suffix (e.g. `OrcaSlicer_Windows_Installer_x64_nightly_belt.exe`)
+
+The `_belt` builds add **experimental support for belt / conveyor (infinite-Z) printers**, where the model is sliced against a tilted belt surface instead of a flat horizontal bed. They include ready-to-use belt printer profiles, the full belt slicing pipeline (mesh rotation and G-code transforms), belt-aware support generation, and a tilted-bed preview.
+
+> ⚠️ Belt printer support is under active development and is **not yet merged into `main`** — it currently ships only in these parallel `_belt` builds, produced from the [`belt-printer`](https://github.com/OrcaSlicer/OrcaSlicer/tree/belt-printer) branch. See tracking PR [#14394](https://github.com/OrcaSlicer/OrcaSlicer/pull/14394) and the original documentation in [#12998](https://github.com/OrcaSlicer/OrcaSlicer/pull/12998).
+
 # How to install
 
 ## Windows

deps_src/libnest2d/include/libnest2d/placers/nfpplacer.hpp

@@ -88,18 +88,6 @@ struct NfpPConfig {
      */
     bool explore_holes = false;
 
-    /**
-     * @brief Keep the final pile on the bin.
-     *
-     * The final alignment centres the pile on the alignment target. A target
-     * near an edge (a belt printer starts its parts at the leading end of the
-     * belt) would push part of a pile that is larger than the room around that
-     * point off the bed; with this set the pile stops at the edge instead, and a
-     * pile that does not fit along an axis is centred on it. Off by default, so
-     * the alignment of every other printer is unchanged.
-     */
-    bool clamp_to_bin = false;
-
     /**
      * @brief If true, use all CPUs available. Run on a single core otherwise.
      */
@@ -1123,24 +1111,7 @@ private:
         default: ; // DONT_ALIGN
         }
 
-        auto d = cb - ci;
-
-        // Keep the pile on the bin (see Config::clamp_to_bin). The items' boxes carry
-        // their inflation, which is the margin left at the edge.
-        if (config_.clamp_to_bin) {
-            auto on_bin = [](Coord lo, Coord hi, Coord bin_lo, Coord bin_hi, Coord shift) {
-                if (hi - lo >= bin_hi - bin_lo)
-                    return (bin_lo + bin_hi) / 2 - (lo + hi) / 2;
-                if (lo + shift < bin_lo)
-                    shift = bin_lo - lo;
-                if (hi + shift > bin_hi)
-                    shift = bin_hi - hi;
-                return shift;
-            };
-            setX(d, on_bin(getX(bb.minCorner()), getX(bb.maxCorner()), getX(bbin.minCorner()), getX(bbin.maxCorner()), getX(d)));
-            setY(d, on_bin(getY(bb.minCorner()), getY(bb.maxCorner()), getY(bbin.minCorner()), getY(bbin.maxCorner()), getY(d)));
-            cb = ci + d;
-        }
+        auto d = cb - ci;       
 
         // BBS make sure the item won't clash with excluded regions
         // do we have wipe tower after arranging?

resources/calib/temperature_tower/gen_belt_temp_tower.py

@@ -1,79 +0,0 @@
-#!/usr/bin/env python3
-"""Belt temperature-tower asset generator (discrete-provini design).
-
-A vertical temperature tower cannot be sliced on a belt printer, so lay a row of
-DISCRETE provini (one per temperature) along the belt (designed Y) with a fixed
-surface gap. Each provino is the chevron+arc unit (belt_temp_provino_unit.stl,
-keel-first); its temperature is ENGRAVED upright into the 50 mm face — a raised
-number would be an unsupported overhang on the belt. The C++ calib_temp belt branch
-(Plater.cpp) injects one M104 per zone 70 layers INTO provino i:
-  print_z[i] = i * PITCH * cos(theta) + 70 * layer_height   (theta = 45)
-inside the body, not in the empty inter-provino gap (which has no sliced layers for
-the event to attach to). PITCH below is the shared geometry contract with that code —
-keep them in sync.
-
-Generates one STL per filament temp range used by Temp_Calibration_Dlg.
-"""
-import numpy as np, trimesh, os
-from matplotlib.textpath import TextPath
-from matplotlib.font_manager import FontProperties
-from shapely.geometry import Polygon as ShPoly
-from shapely.ops import unary_union
-
-HERE = os.path.dirname(os.path.abspath(__file__))
-UNIT = os.path.join(HERE, 'belt_temp_provino_unit.stl')   # single provino, keel-first
-SURF_GAP = 25.0            # surface-to-surface gap between provini (mm) — user spec
-TEXT_H = 9.0
-TEXT_DEPTH = 0.8           # engraving depth (numbers are CUT into the face, not raised:
-                          # a raised number is an unsupported Y-overhang on the belt)
-TEXT_OVERSHOOT = 0.6       # extra height poking out of the face for a clean boolean cut
-
-# Temperature ranges (start, end) per filament family, 5 C step. File name encodes them.
-RANGES = [(230,190),(270,230),(250,230),(280,240),(240,210),(320,280)]
-
-unit = trimesh.load(UNIT)
-dY = unit.bounds[1,1] - unit.bounds[0,1]
-PITCH = dY + SURF_GAP                       # designed-Y pitch == C++ contract constant
-print(f"unit dY={dY:.2f}  PITCH={PITCH:.3f}  (C++ contract: print_z[i]=i*{PITCH:.3f}*cos45)")
-
-# 50 mm face normal (0,-1,1)/sqrt2 ; UPRIGHT basis u=+X det(+1) (verified non-mirrored)
-n = np.array([0,-1,1.])/np.sqrt(2)
-u = np.array([1,0,0.]); v = np.array([0,1,1.])/np.sqrt(2)
-R = np.column_stack([u,v,n])
-fn = unit.face_normals; fc = unit.triangles_center; fa = unit.area_faces
-sel = (fn@n) > 0.9
-face_c = (fc[sel]*fa[sel,None]).sum(0)/fa[sel].sum()
-
-def text_mesh(s):
-    tp = TextPath((0,0), s, size=TEXT_H, prop=FontProperties(family='DejaVu Sans'))
-    rings = [ShPoly(p) for p in tp.to_polygons() if len(p)>=3]
-    rings.sort(key=lambda r:r.area, reverse=True)
-    used=[False]*len(rings); parts=[]
-    for i,o in enumerate(rings):
-        if used[i]: continue
-        holes=[]
-        for j in range(i+1,len(rings)):
-            if not used[j] and o.contains(rings[j]): holes.append(rings[j].exterior.coords); used[j]=True
-        parts.append(ShPoly(o.exterior.coords,holes)); used[i]=True
-    poly = unary_union(parts)
-    geoms = list(poly.geoms) if poly.geom_type=='MultiPolygon' else [poly]
-    m = trimesh.util.concatenate([trimesh.creation.extrude_polygon(g,height=TEXT_DEPTH+TEXT_OVERSHOOT) for g in geoms])
-    c = m.bounds.mean(axis=0); m.apply_translation([-c[0],-c[1],0]); return m
-
-for t_start, t_end in RANGES:
-    temps = list(range(t_start, t_end-1, -5))
-    parts=[]
-    for i,T in enumerate(temps):
-        c = unit.copy(); c.apply_translation([0, i*PITCH, 0])
-        t = text_mesh(str(T)); M=np.eye(4); M[:3,:3]=R; t.apply_transform(M)
-        # place the text spanning from TEXT_DEPTH inside the face to TEXT_OVERSHOOT outside,
-        # then CUT it out of the provino (engrave) — no raised material, no Y-overhang.
-        t.apply_translation(face_c - n*TEXT_DEPTH + np.array([0,i*PITCH,0]))
-        c = trimesh.boolean.difference([c, t], engine='manifold')
-        parts.append(c)
-    asset = trimesh.util.concatenate(parts)
-    out = os.path.join(HERE, f"belt_temp_tower_{t_start}_{t_end}.stl")
-    asset.export(out)
-    dims = np.round(asset.bounds[1]-asset.bounds[0],1)
-    wt = all(p.is_watertight for p in parts)
-    print(f"  {t_start}->{t_end}: {len(temps)} zones  bbox={dims}  watertight={wt}  -> {os.path.basename(out)}")

resources/images/toolbar_tooltip.svg

@@ -1 +1 @@
-<?xml version="1.0" encoding="UTF-8"?><svg id="a" xmlns="http://www.w3.org/2000/svg" viewBox="0 0 15 15"><rect x="7" y="12" width="1" height="1" style="fill:#fefefe;"/><path d="M4.5,5.5c0-1.71,1.43-3.09,3.16-3,1.62.08,2.84,1.54,2.84,3.17h0c0,.61-.25,1.2-.69,1.62l-2.31,2.24v.97" style="fill:none; stroke:#fefefe; stroke-linecap:round; stroke-linejoin:round;"/></svg>
+<svg xmlns="http://www.w3.org/2000/svg" width="25" height="25" viewBox="0 0 25 25"><circle cx="9.5" cy="12.5" r="9.5" style="fill:#009688"/><path d="M6.5,10.5a3,3,0,0,1,6,0c0,3-3,2-3,4v1" style="fill:none;stroke:#e6e6e6;stroke-linecap:round;stroke-linejoin:round"/><rect x="9" y="17" width="1" height="1" style="fill:#e6e6e6"/></svg>

resources/images/toolbar_tooltip_hover.svg

@@ -0,0 +1 @@
+<svg xmlns="http://www.w3.org/2000/svg" width="25" height="25" viewBox="0 0 25 25"><circle cx="9.5" cy="12.5" r="9.5" style="fill:#33aba1"/><path d="M6.5,10.5a3,3,0,0,1,6,0c0,3-3,2-3,4v1" style="fill:none;stroke:#e6e6e6;stroke-linecap:round;stroke-linejoin:round"/><rect x="9" y="17" width="1" height="1" style="fill:#e6e6e6"/></svg>

resources/images/toolbar_video_guide.svg

@@ -1 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?><svg id="a" xmlns="http://www.w3.org/2000/svg" viewBox="0 0 15 15"><path d="M12.31,8l-8.14,4.16c-.31.16-.67-.07-.67-.41V3.27c0-.35.37-.57.68-.41l8.14,4.32c.33.17.33.65,0,.82Z" style="fill:none; stroke:#fefefe; stroke-linecap:round; stroke-linejoin:round;"/></svg>

resources/images/toolbar_wiki.svg

@@ -1 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?><svg id="a" xmlns="http://www.w3.org/2000/svg" viewBox="0 0 15 15"><path d="M7.5,3.5c2-2,5.1-1,6-1" style="fill:none; stroke:#fefefe; stroke-linecap:round; stroke-linejoin:round;"/><path d="M7.5,12.5c2-2,5.1-1,6-1" style="fill:none; stroke:#fefefe; stroke-linecap:round; stroke-linejoin:round;"/><path d="M7.5,3.5C5.5,1.5,2.4,2.5,1.5,2.5" style="fill:none; stroke:#fefefe; stroke-linecap:round; stroke-linejoin:round;"/><path d="M7.5,12.5c-2-2-5.1-1-6-1" style="fill:none; stroke:#fefefe; stroke-linecap:round; stroke-linejoin:round;"/><line x1="13.5" y1="11.5" x2="13.5" y2="2.5" style="fill:none; stroke:#fefefe; stroke-linecap:round; stroke-linejoin:round;"/><line x1="7.5" y1="12.5" x2="7.5" y2="3.5" style="fill:none; stroke:#fefefe; stroke-linecap:round; stroke-linejoin:round;"/><line x1="1.5" y1="11.5" x2="1.5" y2="2.5" style="fill:none; stroke:#fefefe; stroke-linecap:round; stroke-linejoin:round;"/></svg>

resources/profiles/Custom.json

@@ -1,13 +1,9 @@
 {
 	"name": "Custom Printer",
-	"version": "02.04.00.08",
+	"version": "02.04.00.07",
 	"force_update": "0",
 	"description": "My configurations",
 	"machine_model_list": [
-		{
-			"name": "Generic Belt Printer",
-			"sub_path": "machine/MyBeltPrinter.json"
-		},
 		{
 			"name": "Generic Klipper Printer",
 			"sub_path": "machine/MyKlipper.json"
@@ -54,10 +50,6 @@
 			"name": "0.08mm Extra Fine @MyKlipper",
 			"sub_path": "process/0.08mm Extra Fine @MyKlipper.json"
 		},
-		{
-			"name": "0.12mm Fine @MyBeltPrinter",
-			"sub_path": "process/0.12mm Fine @MyBeltPrinter.json"
-		},
 		{
 			"name": "0.12mm Fine @MyKlipper",
 			"sub_path": "process/0.12mm Fine @MyKlipper.json"
@@ -70,10 +62,6 @@
 			"name": "0.16mm Optimal @MyKlipper",
 			"sub_path": "process/0.16mm Optimal @MyKlipper.json"
 		},
-		{
-			"name": "0.20mm Standard @MyBeltPrinter",
-			"sub_path": "process/0.20mm Standard @MyBeltPrinter.json"
-		},
 		{
 			"name": "0.20mm Standard @MyKlipper",
 			"sub_path": "process/0.20mm Standard @MyKlipper.json"
@@ -274,10 +262,6 @@
 			"name": "MyKlipper 0.8 nozzle",
 			"sub_path": "machine/MyKlipper 0.8 nozzle.json"
 		},
-		{
-			"name": "fdm_belt_common",
-			"sub_path": "machine/fdm_belt_common.json"
-		},
 		{
 			"name": "fdm_toolchanger_common",
 			"sub_path": "machine/fdm_toolchanger_common.json"
@@ -290,22 +274,6 @@
 			"name": "MyRRF 0.4 nozzle",
 			"sub_path": "machine/MyRRF 0.4 nozzle.json"
 		},
-		{
-			"name": "MyBeltPrinter 0.2 nozzle",
-			"sub_path": "machine/MyBeltPrinter 0.2 nozzle.json"
-		},
-		{
-			"name": "MyBeltPrinter 0.4 nozzle",
-			"sub_path": "machine/MyBeltPrinter 0.4 nozzle.json"
-		},
-		{
-			"name": "MyBeltPrinter 0.6 nozzle",
-			"sub_path": "machine/MyBeltPrinter 0.6 nozzle.json"
-		},
-		{
-			"name": "MyBeltPrinter 0.8 nozzle",
-			"sub_path": "machine/MyBeltPrinter 0.8 nozzle.json"
-		},
 		{
 			"name": "MyToolChanger 0.2 nozzle",
 			"sub_path": "machine/MyToolChanger 0.2 nozzle.json"

resources/profiles/Custom/machine/MyBeltPrinter 0.2 nozzle.json

@@ -1,27 +0,0 @@
-{
-	"type": "machine",
-	"name": "MyBeltPrinter 0.2 nozzle",
-	"inherits": "fdm_belt_common",
-	"from": "system",
-	"setting_id": "3w1uyJdmm14QhDnH",
-	"instantiation": "true",
-	"printer_model": "Generic Belt Printer",
-	"default_print_profile": "0.12mm Fine @MyBeltPrinter",
-	"nozzle_diameter": [
-		"0.2"
-	],
-	"max_layer_height": [
-		"0.16"
-	],
-	"min_layer_height": [
-		"0.04"
-	],
-	"printer_variant": "0.2",
-	"printable_area": [
-		"0x0",
-		"350x0",
-		"350x350",
-		"0x350"
-	],
-	"printable_height": "300"
-}

resources/profiles/Custom/machine/MyBeltPrinter 0.4 nozzle.json

@@ -1,20 +0,0 @@
-{
-	"type": "machine",
-	"name": "MyBeltPrinter 0.4 nozzle",
-	"inherits": "fdm_belt_common",
-	"from": "system",
-	"setting_id": "6nRHUtvJOUffocbu",
-	"instantiation": "true",
-	"printer_model": "Generic Belt Printer",
-	"nozzle_diameter": [
-		"0.4"
-	],
-	"printer_variant": "0.4",
-	"printable_area": [
-		"0x0",
-		"350x0",
-		"350x350",
-		"0x350"
-	],
-	"printable_height": "300"
-}

resources/profiles/Custom/machine/MyBeltPrinter 0.6 nozzle.json

@@ -1,26 +0,0 @@
-{
-	"type": "machine",
-	"name": "MyBeltPrinter 0.6 nozzle",
-	"inherits": "fdm_belt_common",
-	"from": "system",
-	"setting_id": "K0m9HbUNwKT4UCJV",
-	"instantiation": "true",
-	"printer_model": "Generic Belt Printer",
-	"nozzle_diameter": [
-		"0.6"
-	],
-	"max_layer_height": [
-		"0.4"
-	],
-	"min_layer_height": [
-		"0.12"
-	],
-	"printer_variant": "0.6",
-	"printable_area": [
-		"0x0",
-		"350x0",
-		"350x350",
-		"0x350"
-	],
-	"printable_height": "300"
-}

resources/profiles/Custom/machine/MyBeltPrinter 0.8 nozzle.json

@@ -1,26 +0,0 @@
-{
-	"type": "machine",
-	"name": "MyBeltPrinter 0.8 nozzle",
-	"inherits": "fdm_belt_common",
-	"from": "system",
-	"setting_id": "rHAweDz4eNwttPNA",
-	"instantiation": "true",
-	"printer_model": "Generic Belt Printer",
-	"nozzle_diameter": [
-		"0.8"
-	],
-	"max_layer_height": [
-		"0.6"
-	],
-	"min_layer_height": [
-		"0.2"
-	],
-	"printer_variant": "0.8",
-	"printable_area": [
-		"0x0",
-		"350x0",
-		"350x350",
-		"0x350"
-	],
-	"printable_height": "300"
-}

resources/profiles/Custom/machine/MyBeltPrinter.json

@@ -1,12 +0,0 @@
-{
-	"type": "machine_model",
-	"name": "Generic Belt Printer",
-	"model_id": "my_belt_01",
-	"nozzle_diameter": "0.4;0.2;0.6;0.8",
-	"machine_tech": "FFF",
-	"family": "MyPrinter",
-	"bed_model": "Custom_350_bed.stl",
-	"bed_texture": "orcaslicer_bed_texture.svg",
-	"hotend_model": "",
-	"default_materials": "Generic PLA @System;Generic PLA-CF @System;Generic PETG @System;Generic TPU @System;Generic PC @System;Generic PVA @System;Generic PA @System;Generic PA-CF @System"
-}

resources/profiles/Custom/machine/fdm_belt_common.json

@@ -1,95 +0,0 @@
-{
-	"type": "machine",
-	"name": "fdm_belt_common",
-	"inherits": "fdm_klipper_common",
-	"from": "system",
-	"instantiation": "false",
-	"gcode_flavor": "klipper",
-	"single_extruder_multi_material": "0",
-	"default_filament_profile": [
-		"Generic PLA @System"
-	],
-	"default_print_profile": "0.20mm Standard @MyBeltPrinter",
-	"max_layer_height": [
-		"0.32"
-	],
-	"min_layer_height": [
-		"0.08"
-	],
-	"deretraction_speed": [
-		"30"
-	],
-	"extruder_colour": [
-		"#FCE94F"
-	],
-	"extruder_offset": [
-		"0x0"
-	],
-	"long_retractions_when_cut": [
-		"0"
-	],
-	"nozzle_diameter": [
-		"0.4"
-	],
-	"retract_before_wipe": [
-		"70%"
-	],
-	"retract_length_toolchange": [
-		"2"
-	],
-	"retract_lift_above": [
-		"0"
-	],
-	"retract_lift_below": [
-		"0"
-	],
-	"retract_lift_enforce": [
-		"All Surfaces"
-	],
-	"retract_restart_extra": [
-		"0"
-	],
-	"retract_restart_extra_toolchange": [
-		"0"
-	],
-	"retract_when_changing_layer": [
-		"1"
-	],
-	"retraction_distances_when_cut": [
-		"18"
-	],
-	"retraction_length": [
-		"0.8"
-	],
-	"retraction_minimum_travel": [
-		"1"
-	],
-	"retraction_speed": [
-		"30"
-	],
-	"travel_slope": [
-		"3"
-	],
-	"wipe": [
-		"1"
-	],
-	"wipe_distance": [
-		"1"
-	],
-	"z_hop": [
-		"0"
-	],
-	"z_hop_types": [
-		"Normal Lift"
-	],
-	"gcode_remap_x": "rev_x",
-	"gcode_remap_y": "pos_z",
-	"gcode_remap_z": "pos_y",
-	"belt_printer": "1",
-	"belt_slice_rotation": "x",
-	"belt_slice_rotation_angle": "45",
-	"build_plate_tilt_x": "45",
-	"purge_in_prime_tower": "0",
-	"scan_first_layer": "0",
-	"auxiliary_fan": "0"
-}

resources/profiles/Custom/process/0.12mm Fine @MyBeltPrinter.json

@@ -1,20 +0,0 @@
-{
-	"type": "process",
-	"name": "0.12mm Fine @MyBeltPrinter",
-	"inherits": "fdm_process_klipper_common",
-	"from": "system",
-	"setting_id": "EugqqdLJ423bgEwN",
-	"instantiation": "true",
-	"layer_height": "0.12",
-	"initial_layer_print_height": "0.12",
-	"bottom_shell_layers": "5",
-	"top_shell_layers": "6",
-	"support_top_z_distance": "0.08",
-	"support_bottom_z_distance": "0.08",
-	"skirt_loops": "0",
-	"skirt_distance": "0",
-	"compatible_printers": [
-		"MyBeltPrinter 0.2 nozzle",
-		"MyBeltPrinter 0.4 nozzle"
-	]
-}

resources/profiles/Custom/process/0.20mm Standard @MyBeltPrinter.json

@@ -1,17 +0,0 @@
-{
-	"type": "process",
-	"name": "0.20mm Standard @MyBeltPrinter",
-	"inherits": "fdm_process_klipper_common",
-	"from": "system",
-	"setting_id": "YzCDAgH3uLOM53pF",
-	"instantiation": "true",
-	"layer_height": "0.2",
-	"initial_layer_print_height": "0.2",
-	"skirt_loops": "0",
-	"skirt_distance": "0",
-	"compatible_printers": [
-		"MyBeltPrinter 0.4 nozzle",
-		"MyBeltPrinter 0.6 nozzle",
-		"MyBeltPrinter 0.8 nozzle"
-	]
-}

resources/profiles/FELIX Printers.json

@@ -1,790 +0,0 @@
-{
-	"name": "FELIX Printers",
-	"version": "1.0.0",
-	"force_update": "0",
-	"description": "Configuration file for printers by FELIX Printers",
-	"machine_model_list": [
-		{
-			"name": "FELIX Food Double",
-			"sub_path": "machine/FELIX Food Double.json"
-		},
-		{
-			"name": "FELIX Food Single",
-			"sub_path": "machine/FELIX Food Single.json"
-		},
-		{
-			"name": "FELIX Food Switch",
-			"sub_path": "machine/FELIX Food Switch.json"
-		},
-		{
-			"name": "FELIX Pro 3",
-			"sub_path": "machine/FELIX Pro 3.json"
-		},
-		{
-			"name": "FELIX Pro L 3.0",
-			"sub_path": "machine/FELIX Pro L 3.0.json"
-		},
-		{
-			"name": "FELIX Pro XL 3.0",
-			"sub_path": "machine/FELIX Pro XL 3.0.json"
-		},
-		{
-			"name": "FELIX Tec 4",
-			"sub_path": "machine/FELIX Tec 4.json"
-		}
-	],
-	"machine_list": [
-		{
-			"name": "fdm_all_machines_common",
-			"sub_path": "machine/fdm_all_machines_common.json"
-		},
-		{
-			"name": "fdm_felix_food_common",
-			"sub_path": "machine/fdm_felix_food_common.json"
-		},
-		{
-			"name": "fdm_felix_food_double_common",
-			"sub_path": "machine/fdm_felix_food_double_common.json"
-		},
-		{
-			"name": "fdm_felix_food_switch_common",
-			"sub_path": "machine/fdm_felix_food_switch_common.json"
-		},
-		{
-			"name": "fdm_felix_plastic_common",
-			"sub_path": "machine/fdm_felix_plastic_common.json"
-		},
-		{
-			"name": "fdm_felix_pro_3_common",
-			"sub_path": "machine/fdm_felix_pro_3_common.json"
-		},
-		{
-			"name": "fdm_felix_pro_l_3_common",
-			"sub_path": "machine/fdm_felix_pro_l_3.json"
-		},
-		{
-			"name": "fdm_felix_pro_xl_3_common",
-			"sub_path": "machine/fdm_felix_pro_xl_3_common.json"
-		},
-		{
-			"name": "fdm_felix_tec_common",
-			"sub_path": "machine/fdm_felix_tec_common.json"
-		},
-		{
-			"name": "FELIX Food Single 0.50mm nozzle",
-			"sub_path": "machine/FELIX Food Single 0.50mm nozzle.json"
-		},
-		{
-			"name": "FELIX Food Single 1.00mm nozzle",
-			"sub_path": "machine/FELIX Food Single 1.00mm nozzle.json"
-		},
-		{
-			"name": "FELIX Food Single 2.00mm nozzle",
-			"sub_path": "machine/FELIX Food Single 2.00mm nozzle.json"
-		},
-		{
-			"name": "FELIX Food Single 3.00mm nozzle",
-			"sub_path": "machine/FELIX Food Single 3.00mm nozzle.json"
-		},
-		{
-			"name": "FELIX Food Single 4.00mm nozzle",
-			"sub_path": "machine/FELIX Food Single 4.00mm nozzle.json"
-		},
-		{
-			"name": "FELIX Food Double 0.50mm nozzle",
-			"sub_path": "machine/FELIX Food Double 0.50mm nozzle.json"
-		},
-		{
-			"name": "FELIX Food Double 1.00mm nozzle",
-			"sub_path": "machine/FELIX Food Double 1.00mm nozzle.json"
-		},
-		{
-			"name": "FELIX Food Double 2.00mm nozzle",
-			"sub_path": "machine/FELIX Food Double 2.00mm nozzle.json"
-		},
-		{
-			"name": "FELIX Food Double 3.00mm nozzle",
-			"sub_path": "machine/FELIX Food Double 3.00mm nozzle.json"
-		},
-		{
-			"name": "FELIX Food Double 4.00mm nozzle",
-			"sub_path": "machine/FELIX Food Double 4.00mm nozzle.json"
-		},
-		{
-			"name": "FELIX Food Switch 0.50mm nozzle",
-			"sub_path": "machine/FELIX Food Switch 0.50mm nozzle.json"
-		},
-		{
-			"name": "FELIX Food Switch 1.00mm nozzle",
-			"sub_path": "machine/FELIX Food Switch 1.00mm nozzle.json"
-		},
-		{
-			"name": "FELIX Food Switch 2.00mm nozzle",
-			"sub_path": "machine/FELIX Food Switch 2.00mm nozzle.json"
-		},
-		{
-			"name": "FELIX Food Switch 3.00mm nozzle",
-			"sub_path": "machine/FELIX Food Switch 3.00mm nozzle.json"
-		},
-		{
-			"name": "FELIX Food Switch 4.00mm nozzle",
-			"sub_path": "machine/FELIX Food Switch 4.00mm nozzle.json"
-		},
-		{
-			"name": "FELIX Pro 3 0.25mm nozzle",
-			"sub_path": "machine/FELIX Pro 3 0.25mm nozzle.json"
-		},
-		{
-			"name": "FELIX Pro 3 0.35mm nozzle",
-			"sub_path": "machine/FELIX Pro 3 0.35mm nozzle.json"
-		},
-		{
-			"name": "FELIX Pro 3 0.50mm nozzle",
-			"sub_path": "machine/FELIX Pro 3 0.50mm nozzle.json"
-		},
-		{
-			"name": "FELIX Pro 3 0.70mm nozzle",
-			"sub_path": "machine/FELIX Pro 3 0.70mm nozzle.json"
-		},
-		{
-			"name": "FELIX Pro L 3.0 0.25mm nozzle",
-			"sub_path": "machine/FELIX Pro L 3.0 0.25mm nozzle.json"
-		},
-		{
-			"name": "FELIX Pro L 3.0 0.35mm nozzle",
-			"sub_path": "machine/FELIX Pro L 3.0 0.35mm nozzle.json"
-		},
-		{
-			"name": "FELIX Pro L 3.0 0.50mm nozzle",
-			"sub_path": "machine/FELIX Pro L 3.0 0.50mm nozzle.json"
-		},
-		{
-			"name": "FELIX Pro L 3.0 0.70mm nozzle",
-			"sub_path": "machine/FELIX Pro L 3.0 0.70mm nozzle.json"
-		},
-		{
-			"name": "FELIX Pro XL 3.0 0.25mm nozzle",
-			"sub_path": "machine/FELIX Pro XL 3.0 0.25mm nozzle.json"
-		},
-		{
-			"name": "FELIX Pro XL 3.0 0.35mm nozzle",
-			"sub_path": "machine/FELIX Pro XL 3.0 0.35mm nozzle.json"
-		},
-		{
-			"name": "FELIX Pro XL 3.0 0.50mm nozzle",
-			"sub_path": "machine/FELIX Pro XL 3.0 0.50mm nozzle.json"
-		},
-		{
-			"name": "FELIX Pro XL 3.0 0.70mm nozzle",
-			"sub_path": "machine/FELIX Pro XL 3.0 0.70mm nozzle.json"
-		},
-		{
-			"name": "FELIX Tec 4 0.25mm nozzle",
-			"sub_path": "machine/FELIX Tec 4 0.25mm nozzle.json"
-		},
-		{
-			"name": "FELIX Tec 4 0.35mm nozzle",
-			"sub_path": "machine/FELIX Tec 4 0.35mm nozzle.json"
-		},
-		{
-			"name": "FELIX Tec 4 0.50mm nozzle",
-			"sub_path": "machine/FELIX Tec 4 0.50mm nozzle.json"
-		},
-		{
-			"name": "FELIX Tec 4 0.70mm nozzle",
-			"sub_path": "machine/FELIX Tec 4 0.70mm nozzle.json"
-		}
-	],
-	"process_list": [
-		{
-			"name": "fdm_process_common",
-			"sub_path": "process/fdm_process_common.json"
-		},
-		{
-			"name": "fdm_process_felix_food_common",
-			"sub_path": "process/fdm_process_felix_food_common.json"
-		},
-		{
-			"name": "fdm_process_felix_plastic_common",
-			"sub_path": "process/fdm_process_felix_plastic_common.json"
-		},
-		{
-			"name": "FELIX Food Coarse @ 0.50mm",
-			"sub_path": "process/FELIX Food Coarse @ 0.50mm.json"
-		},
-		{
-			"name": "FELIX Food Coarse @ 1.00mm",
-			"sub_path": "process/FELIX Food Coarse @ 1.00mm.json"
-		},
-		{
-			"name": "FELIX Food Coarse @ 2.00mm",
-			"sub_path": "process/FELIX Food Coarse @ 2.00mm.json"
-		},
-		{
-			"name": "FELIX Food Coarse @ 3.00mm",
-			"sub_path": "process/FELIX Food Coarse @ 3.00mm.json"
-		},
-		{
-			"name": "FELIX Food Coarse @ 4.00mm",
-			"sub_path": "process/FELIX Food Coarse @ 4.00mm.json"
-		},
-		{
-			"name": "FELIX Food Fine @ 0.50mm",
-			"sub_path": "process/FELIX Food Fine @ 0.50mm.json"
-		},
-		{
-			"name": "FELIX Food Fine @ 1.00mm",
-			"sub_path": "process/FELIX Food Fine @ 1.00mm.json"
-		},
-		{
-			"name": "FELIX Food Fine @ 2.00mm",
-			"sub_path": "process/FELIX Food Fine @ 2.00mm.json"
-		},
-		{
-			"name": "FELIX Food Fine @ 3.00mm",
-			"sub_path": "process/FELIX Food Fine @ 3.00mm.json"
-		},
-		{
-			"name": "FELIX Food Fine @ 4.00mm",
-			"sub_path": "process/FELIX Food Fine @ 4.00mm.json"
-		},
-		{
-			"name": "FELIX Food Normal @ 0.50mm",
-			"sub_path": "process/FELIX Food Normal @ 0.50mm.json"
-		},
-		{
-			"name": "FELIX Food Normal @ 1.00mm",
-			"sub_path": "process/FELIX Food Normal @ 1.00mm.json"
-		},
-		{
-			"name": "FELIX Food Normal @ 2.00mm",
-			"sub_path": "process/FELIX Food Normal @ 2.00mm.json"
-		},
-		{
-			"name": "FELIX Food Normal @ 3.00mm",
-			"sub_path": "process/FELIX Food Normal @ 3.00mm.json"
-		},
-		{
-			"name": "FELIX Food Normal @ 4.00mm",
-			"sub_path": "process/FELIX Food Normal @ 4.00mm.json"
-		},
-		{
-			"name": "FELIX Plastic Coarse @ 0.35mm",
-			"sub_path": "process/FELIX Plastic Coarse @ 0.35mm.json"
-		},
-		{
-			"name": "FELIX Plastic Coarse @ 0.50mm",
-			"sub_path": "process/FELIX Plastic Coarse @ 0.50mm.json"
-		},
-		{
-			"name": "FELIX Plastic Coarse @ 0.70mm",
-			"sub_path": "process/FELIX Plastic Coarse @ 0.70mm.json"
-		},
-		{
-			"name": "FELIX Plastic Fine @ 0.25mm",
-			"sub_path": "process/FELIX Plastic Fine @ 0.25mm.json"
-		},
-		{
-			"name": "FELIX Plastic Fine @ 0.35mm",
-			"sub_path": "process/FELIX Plastic Fine @ 0.35mm.json"
-		},
-		{
-			"name": "FELIX Plastic Fine @ 0.50mm",
-			"sub_path": "process/FELIX Plastic Fine @ 0.50mm.json"
-		},
-		{
-			"name": "FELIX Plastic Fine @ 0.70mm",
-			"sub_path": "process/FELIX Plastic Fine @ 0.70mm.json"
-		},
-		{
-			"name": "FELIX Plastic Normal @ 0.25mm",
-			"sub_path": "process/FELIX Plastic Normal @ 0.25mm.json"
-		},
-		{
-			"name": "FELIX Plastic Normal @ 0.35mm",
-			"sub_path": "process/FELIX Plastic Normal @ 0.35mm.json"
-		},
-		{
-			"name": "FELIX Plastic Normal @ 0.50mm",
-			"sub_path": "process/FELIX Plastic Normal @ 0.50mm.json"
-		},
-		{
-			"name": "FELIX Plastic Normal @ 0.70mm",
-			"sub_path": "process/FELIX Plastic Normal @ 0.70mm.json"
-		},
-		{
-			"name": "FELIX Plastic Slightly Coarse @ 0.35mm",
-			"sub_path": "process/FELIX Plastic Slightly Coarse @ 0.35mm.json"
-		},
-		{
-			"name": "FELIX Plastic Slightly Coarse @ 0.50mm",
-			"sub_path": "process/FELIX Plastic Slightly Coarse @ 0.50mm.json"
-		},
-		{
-			"name": "FELIX Plastic Slightly Coarse @ 0.70mm",
-			"sub_path": "process/FELIX Plastic Slightly Coarse @ 0.70mm.json"
-		},
-		{
-			"name": "FELIX Plastic Super Coarse @ 0.70mm",
-			"sub_path": "process/FELIX Plastic Super Coarse @ 0.70mm.json"
-		},
-		{
-			"name": "FELIX Plastic Super Fine @ 0.25mm",
-			"sub_path": "process/FELIX Plastic Super Fine @ 0.25mm.json"
-		},
-		{
-			"name": "FELIX Plastic Super Fine @ 0.35mm",
-			"sub_path": "process/FELIX Plastic Super Fine @ 0.35mm.json"
-		},
-		{
-			"name": "FELIX Plastic Very Coarse @ 0.50mm",
-			"sub_path": "process/FELIX Plastic Very Coarse @ 0.50mm.json"
-		},
-		{
-			"name": "FELIX Plastic Very Coarse @ 0.70mm",
-			"sub_path": "process/FELIX Plastic Very Coarse @ 0.70mm.json"
-		},
-		{
-			"name": "FELIX Plastic Very Fine @ 0.25mm",
-			"sub_path": "process/FELIX Plastic Very Fine @ 0.25mm.json"
-		},
-		{
-			"name": "FELIX Plastic Very Fine @ 0.35mm",
-			"sub_path": "process/FELIX Plastic Very Fine @ 0.35mm.json"
-		},
-		{
-			"name": "FELIX Plastic Very Fine @ 0.50mm",
-			"sub_path": "process/FELIX Plastic Very Fine @ 0.50mm.json"
-		}
-	],
-	"filament_list": [
-		{
-			"name": "fdm_filament_common",
-			"sub_path": "filament/fdm_filament_common.json"
-		},
-		{
-			"name": "fdm_filament_abs",
-			"sub_path": "filament/fdm_filament_abs.json"
-		},
-		{
-			"name": "fdm_filament_asa",
-			"sub_path": "filament/fdm_filament_asa.json"
-		},
-		{
-			"name": "fdm_filament_flex",
-			"sub_path": "filament/fdm_filament_flex.json"
-		},
-		{
-			"name": "fdm_filament_food",
-			"sub_path": "filament/fdm_filament_food.json"
-		},
-		{
-			"name": "fdm_filament_pa",
-			"sub_path": "filament/fdm_filament_pa.json"
-		},
-		{
-			"name": "fdm_filament_pa11cf",
-			"sub_path": "filament/fdm_filament_pa11cf.json"
-		},
-		{
-			"name": "fdm_filament_pc",
-			"sub_path": "filament/fdm_filament_pc.json"
-		},
-		{
-			"name": "fdm_filament_pccf",
-			"sub_path": "filament/fdm_filament_pccf.json"
-		},
-		{
-			"name": "fdm_filament_pet",
-			"sub_path": "filament/fdm_filament_pet.json"
-		},
-		{
-			"name": "fdm_filament_pla",
-			"sub_path": "filament/fdm_filament_pla.json"
-		},
-		{
-			"name": "fdm_filament_pva",
-			"sub_path": "filament/fdm_filament_pva.json"
-		},
-		{
-			"name": "fdm_filament_pvb",
-			"sub_path": "filament/fdm_filament_pvb.json"
-		},
-		{
-			"name": "fdm_filament_tpu",
-			"sub_path": "filament/fdm_filament_tpu.json"
-		},
-		{
-			"name": "FORMFUTURA TitanX ABS Brass @ 0.35mm",
-			"sub_path": "filament/FELIXPlastic/FORMFUTURA TitanX ABS Brass @ 0.35mm.json"
-		},
-		{
-			"name": "FORMFUTURA TitanX ABS Brass @ 0.50mm",
-			"sub_path": "filament/FELIXPlastic/FORMFUTURA TitanX ABS Brass @ 0.50mm.json"
-		},
-		{
-			"name": "FORMFUTURA TitanX ABS Hardened Steel @ 0.25mm",
-			"sub_path": "filament/FELIXPlastic/FORMFUTURA TitanX ABS Hardened Steel @ 0.25mm.json"
-		},
-		{
-			"name": "FORMFUTURA TitanX ABS Hardened Steel @ 0.35mm",
-			"sub_path": "filament/FELIXPlastic/FORMFUTURA TitanX ABS Hardened Steel @ 0.35mm.json"
-		},
-		{
-			"name": "FORMFUTURA TitanX ABS Hardened Steel @ 0.50mm",
-			"sub_path": "filament/FELIXPlastic/FORMFUTURA TitanX ABS Hardened Steel @ 0.50mm.json"
-		},
-		{
-			"name": "FORMFUTURA TitanX ABS Hardened Steel @ 0.70mm",
-			"sub_path": "filament/FELIXPlastic/FORMFUTURA TitanX ABS Hardened Steel @ 0.70mm.json"
-		},
-		{
-			"name": "Ultrafuse ABS Fusion+ Brass @ 0.35mm",
-			"sub_path": "filament/FELIXPlastic/Ultrafuse ABS Fusion+ Brass @ 0.35mm.json"
-		},
-		{
-			"name": "Ultrafuse ABS Fusion+ Brass @ 0.50mm",
-			"sub_path": "filament/FELIXPlastic/Ultrafuse ABS Fusion+ Brass @ 0.50mm.json"
-		},
-		{
-			"name": "Ultrafuse ABS Fusion+ Hardened Steel @ 0.25mm",
-			"sub_path": "filament/FELIXPlastic/Ultrafuse ABS Fusion+ Hardened Steel @ 0.25mm.json"
-		},
-		{
-			"name": "Ultrafuse ABS Fusion+ Hardened Steel @ 0.35mm",
-			"sub_path": "filament/FELIXPlastic/Ultrafuse ABS Fusion+ Hardened Steel @ 0.35mm.json"
-		},
-		{
-			"name": "Ultrafuse ABS Fusion+ Hardened Steel @ 0.50mm",
-			"sub_path": "filament/FELIXPlastic/Ultrafuse ABS Fusion+ Hardened Steel @ 0.50mm.json"
-		},
-		{
-			"name": "Ultrafuse ABS Fusion+ Hardened Steel @ 0.70mm",
-			"sub_path": "filament/FELIXPlastic/Ultrafuse ABS Fusion+ Hardened Steel @ 0.70mm.json"
-		},
-		{
-			"name": "FORMFUTURA AppoloX ASA Brass @ 0.35mm",
-			"sub_path": "filament/FELIXPlastic/FORMFUTURA AppoloX ASA Brass @ 0.35mm.json"
-		},
-		{
-			"name": "FORMFUTURA AppoloX ASA Brass @ 0.50mm",
-			"sub_path": "filament/FELIXPlastic/FORMFUTURA AppoloX ASA Brass @ 0.50mm.json"
-		},
-		{
-			"name": "FORMFUTURA AppoloX ASA Hardened Steel @ 0.25mm",
-			"sub_path": "filament/FELIXPlastic/FORMFUTURA AppoloX ASA Hardened Steel @ 0.25mm.json"
-		},
-		{
-			"name": "FORMFUTURA AppoloX ASA Hardened Steel @ 0.35mm",
-			"sub_path": "filament/FELIXPlastic/FORMFUTURA AppoloX ASA Hardened Steel @ 0.35mm.json"
-		},
-		{
-			"name": "FORMFUTURA AppoloX ASA Hardened Steel @ 0.50mm",
-			"sub_path": "filament/FELIXPlastic/FORMFUTURA AppoloX ASA Hardened Steel @ 0.50mm.json"
-		},
-		{
-			"name": "FORMFUTURA AppoloX ASA Hardened Steel @ 0.70mm",
-			"sub_path": "filament/FELIXPlastic/FORMFUTURA AppoloX ASA Hardened Steel @ 0.70mm.json"
-		},
-		{
-			"name": "FELIX FLEX  Brass @ 0.35mm",
-			"sub_path": "filament/FELIXPlastic/FELIX FLEX  Brass @ 0.35mm.json"
-		},
-		{
-			"name": "FELIX FLEX  Brass @ 0.50mm",
-			"sub_path": "filament/FELIXPlastic/FELIX FLEX  Brass @ 0.50mm.json"
-		},
-		{
-			"name": "FELIX FLEX Hardened Steel @ 0.25mm",
-			"sub_path": "filament/FELIXPlastic/FELIX FLEX Hardened Steel @ 0.25mm.json"
-		},
-		{
-			"name": "FELIX FLEX Hardened Steel @ 0.35mm",
-			"sub_path": "filament/FELIXPlastic/FELIX FLEX Hardened Steel @ 0.35mm.json"
-		},
-		{
-			"name": "FELIX FLEX Hardened Steel @ 0.50mm",
-			"sub_path": "filament/FELIXPlastic/FELIX FLEX Hardened Steel @ 0.50mm.json"
-		},
-		{
-			"name": "FELIX FLEX Hardened Steel @ 0.70mm",
-			"sub_path": "filament/FELIXPlastic/FELIX FLEX Hardened Steel @ 0.70mm.json"
-		},
-		{
-			"name": "Food Medium Plastic  Syringe  @0.50mm",
-			"sub_path": "filament/FELIXFood/Food Medium Plastic  Syringe  @0.50mm.json"
-		},
-		{
-			"name": "Food Medium Plastic  Syringe  @1.00mm",
-			"sub_path": "filament/FELIXFood/Food Medium Plastic  Syringe  @1.00mm.json"
-		},
-		{
-			"name": "Food Medium Plastic  Syringe  @2.00mm",
-			"sub_path": "filament/FELIXFood/Food Medium Plastic  Syringe  @2.00mm.json"
-		},
-		{
-			"name": "Food Medium Plastic  Syringe  @3.00mm",
-			"sub_path": "filament/FELIXFood/Food Medium Plastic  Syringe  @3.00mm.json"
-		},
-		{
-			"name": "Food Medium Plastic  Syringe  @4.00mm",
-			"sub_path": "filament/FELIXFood/Food Medium Plastic  Syringe  @4.00mm.json"
-		},
-		{
-			"name": "Food Medium Stainless Steel  Syringe  @0.50mm",
-			"sub_path": "filament/FELIXFood/Food Medium Stainless Steel  Syringe  @0.50mm.json"
-		},
-		{
-			"name": "Food Medium Stainless Steel  Syringe  @1.00mm",
-			"sub_path": "filament/FELIXFood/Food Medium Stainless Steel  Syringe  @1.00mm.json"
-		},
-		{
-			"name": "Food Medium Stainless Steel  Syringe  @2.00mm",
-			"sub_path": "filament/FELIXFood/Food Medium Stainless Steel  Syringe  @2.00mm.json"
-		},
-		{
-			"name": "Food Medium Stainless Steel  Syringe  @3.00mm",
-			"sub_path": "filament/FELIXFood/Food Medium Stainless Steel  Syringe  @3.00mm.json"
-		},
-		{
-			"name": "Food Medium Stainless Steel  Syringe  @4.00mm",
-			"sub_path": "filament/FELIXFood/Food Medium Stainless Steel  Syringe  @4.00mm.json"
-		},
-		{
-			"name": "Food Thick Stainless Steel  Syringe  @0.50mm",
-			"sub_path": "filament/FELIXFood/Food Thick Stainless Steel  Syringe  @0.50mm.json"
-		},
-		{
-			"name": "Food Thick Stainless Steel  Syringe  @1.00mm",
-			"sub_path": "filament/FELIXFood/Food Thick Stainless Steel  Syringe  @1.00mm.json"
-		},
-		{
-			"name": "Food Thick Stainless Steel  Syringe  @2.00mm",
-			"sub_path": "filament/FELIXFood/Food Thick Stainless Steel  Syringe  @2.00mm.json"
-		},
-		{
-			"name": "Food Thick Stainless Steel  Syringe  @3.00mm",
-			"sub_path": "filament/FELIXFood/Food Thick Stainless Steel  Syringe  @3.00mm.json"
-		},
-		{
-			"name": "Food Thick Stainless Steel  Syringe  @4.00mm",
-			"sub_path": "filament/FELIXFood/Food Thick Stainless Steel  Syringe  @4.00mm.json"
-		},
-		{
-			"name": "Food Thin Plastic  Syringe  @0.50mm",
-			"sub_path": "filament/FELIXFood/Food Thin Plastic  Syringe  @0.50mm.json"
-		},
-		{
-			"name": "Food Thin Plastic  Syringe  @1.00mm",
-			"sub_path": "filament/FELIXFood/Food Thin Plastic  Syringe  @1.00mm.json"
-		},
-		{
-			"name": "Food Thin Plastic  Syringe  @2.00mm",
-			"sub_path": "filament/FELIXFood/Food Thin Plastic  Syringe  @2.00mm.json"
-		},
-		{
-			"name": "Food Thin Plastic  Syringe  @3.00mm",
-			"sub_path": "filament/FELIXFood/Food Thin Plastic  Syringe  @3.00mm.json"
-		},
-		{
-			"name": "Food Thin Plastic  Syringe  @4.00mm",
-			"sub_path": "filament/FELIXFood/Food Thin Plastic  Syringe  @4.00mm.json"
-		},
-		{
-			"name": "Food Thin Stainless Steel  Syringe  @0.50mm",
-			"sub_path": "filament/FELIXFood/Food Thin Stainless Steel  Syringe  @0.50mm.json"
-		},
-		{
-			"name": "Food Thin Stainless Steel  Syringe  @1.00mm",
-			"sub_path": "filament/FELIXFood/Food Thin Stainless Steel  Syringe  @1.00mm.json"
-		},
-		{
-			"name": "Food Thin Stainless Steel  Syringe  @2.00mm",
-			"sub_path": "filament/FELIXFood/Food Thin Stainless Steel  Syringe  @2.00mm.json"
-		},
-		{
-			"name": "Food Thin Stainless Steel  Syringe  @3.00mm",
-			"sub_path": "filament/FELIXFood/Food Thin Stainless Steel  Syringe  @3.00mm.json"
-		},
-		{
-			"name": "Food Thin Stainless Steel  Syringe  @4.00mm",
-			"sub_path": "filament/FELIXFood/Food Thin Stainless Steel  Syringe  @4.00mm.json"
-		},
-		{
-			"name": "Food Very Thick Stainless Steel  Syringe  @1.00mm",
-			"sub_path": "filament/FELIXFood/Food Very Thick Stainless Steel  Syringe  @1.00mm.json"
-		},
-		{
-			"name": "Food Very Thick Stainless Steel  Syringe  @2.00mm",
-			"sub_path": "filament/FELIXFood/Food Very Thick Stainless Steel  Syringe  @2.00mm.json"
-		},
-		{
-			"name": "Food Very Thick Stainless Steel  Syringe  @3.00mm",
-			"sub_path": "filament/FELIXFood/Food Very Thick Stainless Steel  Syringe  @3.00mm.json"
-		},
-		{
-			"name": "Food Very Thick Stainless Steel  Syringe  @4.00mm",
-			"sub_path": "filament/FELIXFood/Food Very Thick Stainless Steel  Syringe  @4.00mm.json"
-		},
-		{
-			"name": "Food Very Thin Plastic  Syringe  @0.50mm",
-			"sub_path": "filament/FELIXFood/Food Very Thin Plastic  Syringe  @0.50mm.json"
-		},
-		{
-			"name": "Food Very Thin Plastic  Syringe  @1.00mm",
-			"sub_path": "filament/FELIXFood/Food Very Thin Plastic  Syringe  @1.00mm.json"
-		},
-		{
-			"name": "Food Very Thin Plastic  Syringe  @2.00mm",
-			"sub_path": "filament/FELIXFood/Food Very Thin Plastic  Syringe  @2.00mm.json"
-		},
-		{
-			"name": "Food Very Thin Plastic  Syringe  @3.00mm",
-			"sub_path": "filament/FELIXFood/Food Very Thin Plastic  Syringe  @3.00mm.json"
-		},
-		{
-			"name": "Food Very Thin Plastic  Syringe  @4.00mm",
-			"sub_path": "filament/FELIXFood/Food Very Thin Plastic  Syringe  @4.00mm.json"
-		},
-		{
-			"name": "Food Very Thin Stainless Steel  Syringe  @0.50mm",
-			"sub_path": "filament/FELIXFood/Food Very Thin Stainless Steel  Syringe  @0.50mm.json"
-		},
-		{
-			"name": "Food Very Thin Stainless Steel  Syringe  @1.00mm",
-			"sub_path": "filament/FELIXFood/Food Very Thin Stainless Steel  Syringe  @1.00mm.json"
-		},
-		{
-			"name": "Food Very Thin Stainless Steel  Syringe  @2.00mm",
-			"sub_path": "filament/FELIXFood/Food Very Thin Stainless Steel  Syringe  @2.00mm.json"
-		},
-		{
-			"name": "Food Very Thin Stainless Steel  Syringe  @3.00mm",
-			"sub_path": "filament/FELIXFood/Food Very Thin Stainless Steel  Syringe  @3.00mm.json"
-		},
-		{
-			"name": "Food Very Thin Stainless Steel  Syringe  @4.00mm",
-			"sub_path": "filament/FELIXFood/Food Very Thin Stainless Steel  Syringe  @4.00mm.json"
-		},
-		{
-			"name": "FELIX PETG Brass @ 0.35mm",
-			"sub_path": "filament/FELIXPlastic/FELIX PETG Brass @ 0.35mm.json"
-		},
-		{
-			"name": "FELIX PETG Brass @ 0.50mm",
-			"sub_path": "filament/FELIXPlastic/FELIX PETG Brass @ 0.50mm.json"
-		},
-		{
-			"name": "FELIX PETG Hardened Steel @ 0.25mm",
-			"sub_path": "filament/FELIXPlastic/FELIX PETG Hardened Steel @ 0.25mm.json"
-		},
-		{
-			"name": "FELIX PETG Hardened Steel @ 0.35mm",
-			"sub_path": "filament/FELIXPlastic/FELIX PETG Hardened Steel @ 0.35mm.json"
-		},
-		{
-			"name": "FELIX PETG Hardened Steel @ 0.50mm",
-			"sub_path": "filament/FELIXPlastic/FELIX PETG Hardened Steel @ 0.50mm.json"
-		},
-		{
-			"name": "FELIX PETG Hardened Steel @ 0.70mm",
-			"sub_path": "filament/FELIXPlastic/FELIX PETG Hardened Steel @ 0.70mm.json"
-		},
-		{
-			"name": "FELIX Premium PLA Brass @ 0.35mm",
-			"sub_path": "filament/FELIXPlastic/FELIX Premium PLA Brass @ 0.35mm.json"
-		},
-		{
-			"name": "FELIX Premium PLA Brass @ 0.50mm",
-			"sub_path": "filament/FELIXPlastic/FELIX Premium PLA Brass @ 0.50mm.json"
-		},
-		{
-			"name": "FELIX Premium PLA Hardened Steel @ 0.25mm",
-			"sub_path": "filament/FELIXPlastic/FELIX Premium PLA Hardened Steel @ 0.25mm.json"
-		},
-		{
-			"name": "FELIX Premium PLA Hardened Steel @ 0.35mm",
-			"sub_path": "filament/FELIXPlastic/FELIX Premium PLA Hardened Steel @ 0.35mm.json"
-		},
-		{
-			"name": "FELIX Premium PLA Hardened Steel @ 0.50mm",
-			"sub_path": "filament/FELIXPlastic/FELIX Premium PLA Hardened Steel @ 0.50mm.json"
-		},
-		{
-			"name": "FELIX Premium PLA Hardened Steel @ 0.70mm",
-			"sub_path": "filament/FELIXPlastic/FELIX Premium PLA Hardened Steel @ 0.70mm.json"
-		},
-		{
-			"name": "FELIX Wood  Brass @ 0.35mm",
-			"sub_path": "filament/FELIXPlastic/FELIX Wood  Brass @ 0.35mm.json"
-		},
-		{
-			"name": "FELIX Wood Brass @ 0.50mm",
-			"sub_path": "filament/FELIXPlastic/FELIX Wood Brass @ 0.50mm.json"
-		},
-		{
-			"name": "FELIX Wood Hardened Steel @ 0.25mm",
-			"sub_path": "filament/FELIXPlastic/FELIX Wood Hardened Steel @ 0.25mm.json"
-		},
-		{
-			"name": "FELIX Wood Hardened Steel @ 0.35mm",
-			"sub_path": "filament/FELIXPlastic/FELIX Wood Hardened Steel @ 0.35mm.json"
-		},
-		{
-			"name": "FELIX Wood Hardened Steel @ 0.50mm",
-			"sub_path": "filament/FELIXPlastic/FELIX Wood Hardened Steel @ 0.50mm.json"
-		},
-		{
-			"name": "FELIX Wood Hardened Steel @ 0.70mm",
-			"sub_path": "filament/FELIXPlastic/FELIX Wood Hardened Steel @ 0.70mm.json"
-		},
-		{
-			"name": "FORMFUTURA ePLA Brass @ 0.35mm",
-			"sub_path": "filament/FELIXPlastic/FORMFUTURA ePLA Brass @ 0.35mm.json"
-		},
-		{
-			"name": "FORMFUTURA ePLA Brass @ 0.50mm",
-			"sub_path": "filament/FELIXPlastic/FORMFUTURA ePLA Brass @ 0.50mm.json"
-		},
-		{
-			"name": "FORMFUTURA ePLA Hardened Steel @ 0.25mm",
-			"sub_path": "filament/FELIXPlastic/FORMFUTURA ePLA Hardened Steel @ 0.25mm.json"
-		},
-		{
-			"name": "FORMFUTURA ePLA Hardened Steel @ 0.35mm",
-			"sub_path": "filament/FELIXPlastic/FORMFUTURA ePLA Hardened Steel @ 0.35mm.json"
-		},
-		{
-			"name": "FORMFUTURA ePLA Hardened Steel @ 0.50mm",
-			"sub_path": "filament/FELIXPlastic/FORMFUTURA ePLA Hardened Steel @ 0.50mm.json"
-		},
-		{
-			"name": "FORMFUTURA ePLA Hardened Steel @ 0.70mm",
-			"sub_path": "filament/FELIXPlastic/FORMFUTURA ePLA Hardened Steel @ 0.70mm.json"
-		},
-		{
-			"name": "FORMFUTURA Aquasolve PVA Brass @ 0.35mm",
-			"sub_path": "filament/FELIXPlastic/FORMFUTURA Aquasolve PVA Brass @ 0.35mm.json"
-		},
-		{
-			"name": "FORMFUTURA Aquasolve PVA Brass @ 0.50mm",
-			"sub_path": "filament/FELIXPlastic/FORMFUTURA Aquasolve PVA Brass @ 0.50mm.json"
-		},
-		{
-			"name": "FORMFUTURA Aquasolve PVA Hardened Steel @ 0.25mm",
-			"sub_path": "filament/FELIXPlastic/FORMFUTURA Aquasolve PVA Hardened Steel @ 0.25mm.json"
-		},
-		{
-			"name": "FORMFUTURA Aquasolve PVA Hardened Steel @ 0.35mm",
-			"sub_path": "filament/FELIXPlastic/FORMFUTURA Aquasolve PVA Hardened Steel @ 0.35mm.json"
-		},
-		{
-			"name": "FORMFUTURA Aquasolve PVA Hardened Steel @ 0.50mm",
-			"sub_path": "filament/FELIXPlastic/FORMFUTURA Aquasolve PVA Hardened Steel @ 0.50mm.json"
-		},
-		{
-			"name": "FORMFUTURA Aquasolve PVA Hardened Steel @ 0.70mm",
-			"sub_path": "filament/FELIXPlastic/FORMFUTURA Aquasolve PVA Hardened Steel @ 0.70mm.json"
-		}
-	]
-}

resources/profiles/FELIX Printers/FELIX Build plate image.svg

@@ -1,28 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<svg id="a" xmlns="http://www.w3.org/2000/svg" width="180.62mm" height="180.62mm" viewBox="0 0 512 512" xmlns:c2pa="http://c2pa.org/manifest">
-  <rect x="0" y="0" width="512" height="512" fill="none"/>
-  <g fill="#ffffff" transform="translate(5,460) scale(0.2)">
-    <g>
-      <path d="M139.4.8l-.2,62c-34.3,0-63.4,21.8-73.2,51.9C26.4,141,.2,187.8.2,241.3H0l.2-101.3C.2,63.1,62.4.8,139.4.8Z"/>
-      <path d="M139.1,92.5l-.8,62.5c-42.6,0-77.1,38.6-77.1,86.3l1-103.9c0-7.9,1.3-15.5,3.6-22.7,21.2-14.1,46.3-22.3,73.2-22.3Z"/>
-      <path d="M65.9,114.7c-2.3,7.2-3.6,14.8-3.6,22.7l-1,103.9H.2c0-53.5,26.3-100.3,65.7-126.6Z"/>
-    </g>
-    <polygon points="202.8 .4 202.8 92.9 226.2 92.9 226.2 56 259.8 56 259.8 36.1 226.2 36.1 226.2 19.4 265.7 19.4 265.7 0 202.8 .4"/>
-    <polygon points="282.3 -.3 282.3 93 346.1 93 346.1 72.4 306.8 72.4 306.8 55.6 341.7 55.6 341.7 36.4 306.5 36.4 306.5 19.6 346.2 19.6 346.2 -.3 282.3 -.3"/>
-    <polygon points="365.9 92.8 429.5 92.8 429.5 70.9 389.6 70.9 389.6 .2 365 .2 365.9 92.8"/>
-    <polygon points="448 0 471.9 0 471.9 92.5 447.5 92.5 448 0"/>
-    <path d="M485.1,92.5s34.7-44.3,33.4-46.5S485.7,0,485.7,0h29l18.4,24.8L550.1,0h26.6l-29.9,45.4,33.1,46.8h-28.8l-19.3-27.4-18.9,28.1-27.9-.4Z"/>
-    <g>
-      <path d="M210.9,154.1c-1.9,0-3.7-.2-5.3-.7-1.6-.4-3-1-4.2-1.6v-3.9c1.1.6,2.4,1.1,3.9,1.6,1.5.5,3.2.7,5.1.7,3.1,0,5.5-.6,7.2-1.7,1.7-1.2,2.5-2.8,2.5-5s-.8-3.9-2.5-5c-1.7-1.2-4.2-1.7-7.4-1.7h-3.9v-3.7h4c2.6,0,4.5-.5,5.9-1.5,1.4-1,2-2.4,2-4.2s-.3-2.3-1-3.1c-.6-.8-1.6-1.5-2.8-1.9-1.3-.4-2.8-.7-4.6-.7s-3,.2-4.3.6c-1.3.4-2.4.8-3.3,1.3v-3.9c1.1-.5,2.3-.9,3.6-1.3,1.3-.4,2.8-.5,4.5-.5s4,.3,5.5.8c1.5.5,2.7,1.3,3.6,2.2.9.9,1.6,1.9,2,3.1.4,1.1.6,2.3.6,3.4s-.2,2.4-.7,3.3c-.5.9-1,1.7-1.6,2.2-.6.6-1.4,1.1-2.3,1.6,1.3.7,2.3,1.4,3.2,2.1s1.6,1.7,2.2,2.8c.6,1.1,1,2.5,1,4.2s-.2,2.5-.7,3.8c-.5,1.2-1.2,2.4-2.2,3.4s-2.4,1.8-4,2.4c-1.7.6-3.7.9-6.1.9Z"/>
-      <path d="M232.1,153.7v-35.4h11.1c5.5,0,9.7,1.5,12.4,4.4,2.8,3,4.2,7.4,4.2,13.2s-1.4,10.3-4.2,13.2c-2.8,3-6.9,4.5-12.4,4.5h-11.1ZM235.9,150h7c4.5,0,7.8-1.1,9.9-3.4,2-2.3,3.1-5.8,3.1-10.7s-1-8.4-3.1-10.7c-2-2.3-5.3-3.4-9.9-3.4h-7v28.2Z"/>
-      <path d="M291.9,154.4c-.8,0-1.7-.1-2.6-.3-1-.2-1.9-.5-2.8-.8-.9-.3-1.7-.7-2.4-1l1.3-1.3v14.2h-3.8v-33.2c0-1.1.3-2,1-2.7.7-.7,1.6-1.2,2.7-1.6,1.1-.4,2.3-.6,3.5-.8,1.2-.2,2.4-.2,3.5-.2,2.1,0,4.1.4,6,1.3,1.9.9,3.4,2.4,4.6,4.5s1.7,5,1.7,8.6-.5,5.1-1.5,7.1c-1,2-2.4,3.5-4.3,4.6-1.9,1.1-4.2,1.6-6.9,1.6ZM291.9,150.9c1.9,0,3.5-.4,4.8-1.2,1.3-.8,2.2-2,2.8-3.5.6-1.5,1-3.2,1-5.1s-.2-3.7-.6-5.4c-.4-1.7-1.2-3-2.4-4-1.2-1-3-1.5-5.2-1.5s-3.4.2-4.8.6c-1.4.4-2,1-2,1.8v16.4c1.1.6,2.2,1.1,3.3,1.4s2.2.5,3.3.5Z"/>
-      <path d="M311.1,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1c-.8,0-1.6.2-2.4.3-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
-      <path d="M330.5,122.5v-4.2h4.2v4.2h-4.2ZM330.8,153.7v-26.4h3.8v26.4h-3.8Z"/>
-      <path d="M342.7,129.3c.8-.4,1.7-.8,2.6-1.1.9-.3,1.8-.6,2.8-.8.9-.2,1.9-.4,2.9-.5,1-.1,2-.2,2.9-.2,2.6,0,4.6.4,6.1,1.1,1.5.8,2.6,1.9,3.3,3.3.7,1.4,1,3.2,1,5.2v17.2h-3.8v-17.2c0-.6,0-1.3-.2-2-.2-.7-.5-1.4-.9-2-.5-.7-1.2-1.2-2.1-1.6s-2.2-.6-3.8-.6-2.2,0-3.4.3-2.4.4-3.6.8v22.4h-3.8v-24.3Z"/>
-      <path d="M380.7,154.1c-1.9,0-3.4-.6-4.7-1.7-1.3-1.1-1.9-2.9-1.9-5.1v-16.5h-4.6v-3.5h4.6v-7.5h3.8v7.5h6.8v3.5h-6.8v15.3c0,1.5.2,2.6.7,3.3s1.4,1.1,2.8,1.1,1.3,0,1.9-.2,1.1-.3,1.5-.5v3.6c-.5.2-1.1.3-1.9.5s-1.5.2-2.1.2Z"/>
-      <path d="M402,154.4c-2.5,0-4.7-.5-6.5-1.6-1.8-1-3.3-2.6-4.2-4.7-1-2.1-1.5-4.7-1.5-7.8,0-4.6,1-8,3.1-10.3,2.1-2.3,4.9-3.4,8.5-3.4s5.1.6,6.8,1.9c1.7,1.3,2.9,3,3.7,5.1.7,2.2,1.1,4.6,1.1,7.3h-21.3l.3-3.5h18.5l-1.5.5c-.1-2.6-.8-4.6-2-5.9-1.2-1.3-3.1-2-5.6-2s-3.2.3-4.3,1c-1.1.6-2,1.7-2.6,3.3s-.8,3.8-.8,6.6.8,5.7,2.3,7.3c1.5,1.7,3.6,2.5,6.3,2.5s2.5,0,3.6-.3,2.1-.5,3-.8c.9-.4,1.7-.7,2.4-1.2v3.9c-1.3.6-2.7,1.1-4.2,1.4-1.5.3-3.2.5-5.1.5Z"/>
-      <path d="M419.5,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1-1.6.2-2.4.3c-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
-      <path d="M446.4,154.4c-1.9,0-3.5-.2-4.8-.6s-2.6-.9-4-1.6v-4c1.1.6,2.1,1.1,2.9,1.5s1.7.7,2.6.9c.9.2,1.9.3,3,.3,1.8,0,3.2-.4,4.3-1.2,1.1-.8,1.7-1.8,1.7-3s-.3-1.7-.8-2.3-1.2-1-2.1-1.3c-.8-.4-1.7-.7-2.7-1.1-1-.3-2.1-.6-3.1-.9-1-.3-2-.8-2.9-1.3-.9-.5-1.6-1.3-2.1-2.1-.5-.9-.8-2-.8-3.4s.3-2.5.8-3.4c.5-1,1.3-1.7,2.1-2.4.9-.6,1.9-1.1,3-1.4,1.1-.3,2.2-.4,3.3-.4,1.6,0,2.9.2,4.1.6,1.1.4,2.3.9,3.5,1.4v3.8c-1.3-.7-2.5-1.3-3.6-1.7-1.1-.4-2.3-.7-3.8-.7s-2.7.3-3.9.9c-1.1.6-1.7,1.5-1.7,2.7s.3,1.8.9,2.4,1.4,1,2.3,1.4c1,.3,2,.7,3.1,1,.9.3,1.8.6,2.8.9,1,.3,1.8.8,2.7,1.3.8.5,1.5,1.3,2,2.1.5.9.8,2,.8,3.4s-.5,3.4-1.4,4.6-2.2,2.1-3.6,2.7c-1.5.6-3,.8-4.5.8Z"/>
-    </g>
-  </g>
-</svg>

resources/profiles/FELIX Printers/FELIX Food Series build plate texture.svg

@@ -1,28 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<svg id="a" xmlns="http://www.w3.org/2000/svg" width="180.62mm" height="180.62mm" viewBox="0 0 250 195" xmlns:c2pa="http://c2pa.org/manifest">
-  <rect x="0" y="0" width="250" height="195" fill="none"/>
-  <g fill="#ffffff" transform="translate(2,169) scale(0.1)">
-    <g>
-      <path d="M139.4.8l-.2,62c-34.3,0-63.4,21.8-73.2,51.9C26.4,141,.2,187.8.2,241.3H0l.2-101.3C.2,63.1,62.4.8,139.4.8Z"/>
-      <path d="M139.1,92.5l-.8,62.5c-42.6,0-77.1,38.6-77.1,86.3l1-103.9c0-7.9,1.3-15.5,3.6-22.7,21.2-14.1,46.3-22.3,73.2-22.3Z"/>
-      <path d="M65.9,114.7c-2.3,7.2-3.6,14.8-3.6,22.7l-1,103.9H.2c0-53.5,26.3-100.3,65.7-126.6Z"/>
-    </g>
-    <polygon points="202.8 .4 202.8 92.9 226.2 92.9 226.2 56 259.8 56 259.8 36.1 226.2 36.1 226.2 19.4 265.7 19.4 265.7 0 202.8 .4"/>
-    <polygon points="282.3 -.3 282.3 93 346.1 93 346.1 72.4 306.8 72.4 306.8 55.6 341.7 55.6 341.7 36.4 306.5 36.4 306.5 19.6 346.2 19.6 346.2 -.3 282.3 -.3"/>
-    <polygon points="365.9 92.8 429.5 92.8 429.5 70.9 389.6 70.9 389.6 .2 365 .2 365.9 92.8"/>
-    <polygon points="448 0 471.9 0 471.9 92.5 447.5 92.5 448 0"/>
-    <path d="M485.1,92.5s34.7-44.3,33.4-46.5S485.7,0,485.7,0h29l18.4,24.8L550.1,0h26.6l-29.9,45.4,33.1,46.8h-28.8l-19.3-27.4-18.9,28.1-27.9-.4Z"/>
-    <g>
-      <path d="M210.9,154.1c-1.9,0-3.7-.2-5.3-.7-1.6-.4-3-1-4.2-1.6v-3.9c1.1.6,2.4,1.1,3.9,1.6,1.5.5,3.2.7,5.1.7,3.1,0,5.5-.6,7.2-1.7,1.7-1.2,2.5-2.8,2.5-5s-.8-3.9-2.5-5c-1.7-1.2-4.2-1.7-7.4-1.7h-3.9v-3.7h4c2.6,0,4.5-.5,5.9-1.5,1.4-1,2-2.4,2-4.2s-.3-2.3-1-3.1c-.6-.8-1.6-1.5-2.8-1.9-1.3-.4-2.8-.7-4.6-.7s-3,.2-4.3.6c-1.3.4-2.4.8-3.3,1.3v-3.9c1.1-.5,2.3-.9,3.6-1.3,1.3-.4,2.8-.5,4.5-.5s4,.3,5.5.8c1.5.5,2.7,1.3,3.6,2.2.9.9,1.6,1.9,2,3.1.4,1.1.6,2.3.6,3.4s-.2,2.4-.7,3.3c-.5.9-1,1.7-1.6,2.2-.6.6-1.4,1.1-2.3,1.6,1.3.7,2.3,1.4,3.2,2.1s1.6,1.7,2.2,2.8c.6,1.1,1,2.5,1,4.2s-.2,2.5-.7,3.8c-.5,1.2-1.2,2.4-2.2,3.4s-2.4,1.8-4,2.4c-1.7.6-3.7.9-6.1.9Z"/>
-      <path d="M232.1,153.7v-35.4h11.1c5.5,0,9.7,1.5,12.4,4.4,2.8,3,4.2,7.4,4.2,13.2s-1.4,10.3-4.2,13.2c-2.8,3-6.9,4.5-12.4,4.5h-11.1ZM235.9,150h7c4.5,0,7.8-1.1,9.9-3.4,2-2.3,3.1-5.8,3.1-10.7s-1-8.4-3.1-10.7c-2-2.3-5.3-3.4-9.9-3.4h-7v28.2Z"/>
-      <path d="M291.9,154.4c-.8,0-1.7-.1-2.6-.3-1-.2-1.9-.5-2.8-.8-.9-.3-1.7-.7-2.4-1l1.3-1.3v14.2h-3.8v-33.2c0-1.1.3-2,1-2.7.7-.7,1.6-1.2,2.7-1.6,1.1-.4,2.3-.6,3.5-.8,1.2-.2,2.4-.2,3.5-.2,2.1,0,4.1.4,6,1.3,1.9.9,3.4,2.4,4.6,4.5s1.7,5,1.7,8.6-.5,5.1-1.5,7.1c-1,2-2.4,3.5-4.3,4.6-1.9,1.1-4.2,1.6-6.9,1.6ZM291.9,150.9c1.9,0,3.5-.4,4.8-1.2,1.3-.8,2.2-2,2.8-3.5.6-1.5,1-3.2,1-5.1s-.2-3.7-.6-5.4c-.4-1.7-1.2-3-2.4-4-1.2-1-3-1.5-5.2-1.5s-3.4.2-4.8.6c-1.4.4-2,1-2,1.8v16.4c1.1.6,2.2,1.1,3.3,1.4s2.2.5,3.3.5Z"/>
-      <path d="M311.1,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1c-.8,0-1.6.2-2.4.3-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
-      <path d="M330.5,122.5v-4.2h4.2v4.2h-4.2ZM330.8,153.7v-26.4h3.8v26.4h-3.8Z"/>
-      <path d="M342.7,129.3c.8-.4,1.7-.8,2.6-1.1.9-.3,1.8-.6,2.8-.8.9-.2,1.9-.4,2.9-.5,1-.1,2-.2,2.9-.2,2.6,0,4.6.4,6.1,1.1,1.5.8,2.6,1.9,3.3,3.3.7,1.4,1,3.2,1,5.2v17.2h-3.8v-17.2c0-.6,0-1.3-.2-2-.2-.7-.5-1.4-.9-2-.5-.7-1.2-1.2-2.1-1.6s-2.2-.6-3.8-.6-2.2,0-3.4.3-2.4.4-3.6.8v22.4h-3.8v-24.3Z"/>
-      <path d="M380.7,154.1c-1.9,0-3.4-.6-4.7-1.7-1.3-1.1-1.9-2.9-1.9-5.1v-16.5h-4.6v-3.5h4.6v-7.5h3.8v7.5h6.8v3.5h-6.8v15.3c0,1.5.2,2.6.7,3.3s1.4,1.1,2.8,1.1,1.3,0,1.9-.2,1.1-.3,1.5-.5v3.6c-.5.2-1.1.3-1.9.5s-1.5.2-2.1.2Z"/>
-      <path d="M402,154.4c-2.5,0-4.7-.5-6.5-1.6-1.8-1-3.3-2.6-4.2-4.7-1-2.1-1.5-4.7-1.5-7.8,0-4.6,1-8,3.1-10.3,2.1-2.3,4.9-3.4,8.5-3.4s5.1.6,6.8,1.9c1.7,1.3,2.9,3,3.7,5.1.7,2.2,1.1,4.6,1.1,7.3h-21.3l.3-3.5h18.5l-1.5.5c-.1-2.6-.8-4.6-2-5.9-1.2-1.3-3.1-2-5.6-2s-3.2.3-4.3,1c-1.1.6-2,1.7-2.6,3.3s-.8,3.8-.8,6.6.8,5.7,2.3,7.3c1.5,1.7,3.6,2.5,6.3,2.5s2.5,0,3.6-.3,2.1-.5,3-.8c.9-.4,1.7-.7,2.4-1.2v3.9c-1.3.6-2.7,1.1-4.2,1.4-1.5.3-3.2.5-5.1.5Z"/>
-      <path d="M419.5,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1-1.6.2-2.4.3c-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
-      <path d="M446.4,154.4c-1.9,0-3.5-.2-4.8-.6s-2.6-.9-4-1.6v-4c1.1.6,2.1,1.1,2.9,1.5s1.7.7,2.6.9c.9.2,1.9.3,3,.3,1.8,0,3.2-.4,4.3-1.2,1.1-.8,1.7-1.8,1.7-3s-.3-1.7-.8-2.3-1.2-1-2.1-1.3c-.8-.4-1.7-.7-2.7-1.1-1-.3-2.1-.6-3.1-.9-1-.3-2-.8-2.9-1.3-.9-.5-1.6-1.3-2.1-2.1-.5-.9-.8-2-.8-3.4s.3-2.5.8-3.4c.5-1,1.3-1.7,2.1-2.4.9-.6,1.9-1.1,3-1.4,1.1-.3,2.2-.4,3.3-.4,1.6,0,2.9.2,4.1.6,1.1.4,2.3.9,3.5,1.4v3.8c-1.3-.7-2.5-1.3-3.6-1.7-1.1-.4-2.3-.7-3.8-.7s-2.7.3-3.9.9c-1.1.6-1.7,1.5-1.7,2.7s.3,1.8.9,2.4,1.4,1,2.3,1.4c1,.3,2,.7,3.1,1,.9.3,1.8.6,2.8.9,1,.3,1.8.8,2.7,1.3.8.5,1.5,1.3,2,2.1.5.9.8,2,.8,3.4s-.5,3.4-1.4,4.6-2.2,2.1-3.6,2.7c-1.5.6-3,.8-4.5.8Z"/>
-    </g>
-  </g>
-</svg>

resources/profiles/FELIX Printers/FELIX Pro L Series build plate texture.svg

@@ -1,28 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<svg id="a" xmlns="http://www.w3.org/2000/svg" width="180.62mm" height="180.62mm" viewBox="0 0 300 400" xmlns:c2pa="http://c2pa.org/manifest">
-  <rect x="0" y="0" width="300" height="400" fill="none"/>
-  <g fill="#ffffff" transform="translate(3,365) scale(0.13)">
-    <g>
-      <path d="M139.4.8l-.2,62c-34.3,0-63.4,21.8-73.2,51.9C26.4,141,.2,187.8.2,241.3H0l.2-101.3C.2,63.1,62.4.8,139.4.8Z"/>
-      <path d="M139.1,92.5l-.8,62.5c-42.6,0-77.1,38.6-77.1,86.3l1-103.9c0-7.9,1.3-15.5,3.6-22.7,21.2-14.1,46.3-22.3,73.2-22.3Z"/>
-      <path d="M65.9,114.7c-2.3,7.2-3.6,14.8-3.6,22.7l-1,103.9H.2c0-53.5,26.3-100.3,65.7-126.6Z"/>
-    </g>
-    <polygon points="202.8 .4 202.8 92.9 226.2 92.9 226.2 56 259.8 56 259.8 36.1 226.2 36.1 226.2 19.4 265.7 19.4 265.7 0 202.8 .4"/>
-    <polygon points="282.3 -.3 282.3 93 346.1 93 346.1 72.4 306.8 72.4 306.8 55.6 341.7 55.6 341.7 36.4 306.5 36.4 306.5 19.6 346.2 19.6 346.2 -.3 282.3 -.3"/>
-    <polygon points="365.9 92.8 429.5 92.8 429.5 70.9 389.6 70.9 389.6 .2 365 .2 365.9 92.8"/>
-    <polygon points="448 0 471.9 0 471.9 92.5 447.5 92.5 448 0"/>
-    <path d="M485.1,92.5s34.7-44.3,33.4-46.5S485.7,0,485.7,0h29l18.4,24.8L550.1,0h26.6l-29.9,45.4,33.1,46.8h-28.8l-19.3-27.4-18.9,28.1-27.9-.4Z"/>
-    <g>
-      <path d="M210.9,154.1c-1.9,0-3.7-.2-5.3-.7-1.6-.4-3-1-4.2-1.6v-3.9c1.1.6,2.4,1.1,3.9,1.6,1.5.5,3.2.7,5.1.7,3.1,0,5.5-.6,7.2-1.7,1.7-1.2,2.5-2.8,2.5-5s-.8-3.9-2.5-5c-1.7-1.2-4.2-1.7-7.4-1.7h-3.9v-3.7h4c2.6,0,4.5-.5,5.9-1.5,1.4-1,2-2.4,2-4.2s-.3-2.3-1-3.1c-.6-.8-1.6-1.5-2.8-1.9-1.3-.4-2.8-.7-4.6-.7s-3,.2-4.3.6c-1.3.4-2.4.8-3.3,1.3v-3.9c1.1-.5,2.3-.9,3.6-1.3,1.3-.4,2.8-.5,4.5-.5s4,.3,5.5.8c1.5.5,2.7,1.3,3.6,2.2.9.9,1.6,1.9,2,3.1.4,1.1.6,2.3.6,3.4s-.2,2.4-.7,3.3c-.5.9-1,1.7-1.6,2.2-.6.6-1.4,1.1-2.3,1.6,1.3.7,2.3,1.4,3.2,2.1s1.6,1.7,2.2,2.8c.6,1.1,1,2.5,1,4.2s-.2,2.5-.7,3.8c-.5,1.2-1.2,2.4-2.2,3.4s-2.4,1.8-4,2.4c-1.7.6-3.7.9-6.1.9Z"/>
-      <path d="M232.1,153.7v-35.4h11.1c5.5,0,9.7,1.5,12.4,4.4,2.8,3,4.2,7.4,4.2,13.2s-1.4,10.3-4.2,13.2c-2.8,3-6.9,4.5-12.4,4.5h-11.1ZM235.9,150h7c4.5,0,7.8-1.1,9.9-3.4,2-2.3,3.1-5.8,3.1-10.7s-1-8.4-3.1-10.7c-2-2.3-5.3-3.4-9.9-3.4h-7v28.2Z"/>
-      <path d="M291.9,154.4c-.8,0-1.7-.1-2.6-.3-1-.2-1.9-.5-2.8-.8-.9-.3-1.7-.7-2.4-1l1.3-1.3v14.2h-3.8v-33.2c0-1.1.3-2,1-2.7.7-.7,1.6-1.2,2.7-1.6,1.1-.4,2.3-.6,3.5-.8,1.2-.2,2.4-.2,3.5-.2,2.1,0,4.1.4,6,1.3,1.9.9,3.4,2.4,4.6,4.5s1.7,5,1.7,8.6-.5,5.1-1.5,7.1c-1,2-2.4,3.5-4.3,4.6-1.9,1.1-4.2,1.6-6.9,1.6ZM291.9,150.9c1.9,0,3.5-.4,4.8-1.2,1.3-.8,2.2-2,2.8-3.5.6-1.5,1-3.2,1-5.1s-.2-3.7-.6-5.4c-.4-1.7-1.2-3-2.4-4-1.2-1-3-1.5-5.2-1.5s-3.4.2-4.8.6c-1.4.4-2,1-2,1.8v16.4c1.1.6,2.2,1.1,3.3,1.4s2.2.5,3.3.5Z"/>
-      <path d="M311.1,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1c-.8,0-1.6.2-2.4.3-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
-      <path d="M330.5,122.5v-4.2h4.2v4.2h-4.2ZM330.8,153.7v-26.4h3.8v26.4h-3.8Z"/>
-      <path d="M342.7,129.3c.8-.4,1.7-.8,2.6-1.1.9-.3,1.8-.6,2.8-.8.9-.2,1.9-.4,2.9-.5,1-.1,2-.2,2.9-.2,2.6,0,4.6.4,6.1,1.1,1.5.8,2.6,1.9,3.3,3.3.7,1.4,1,3.2,1,5.2v17.2h-3.8v-17.2c0-.6,0-1.3-.2-2-.2-.7-.5-1.4-.9-2-.5-.7-1.2-1.2-2.1-1.6s-2.2-.6-3.8-.6-2.2,0-3.4.3-2.4.4-3.6.8v22.4h-3.8v-24.3Z"/>
-      <path d="M380.7,154.1c-1.9,0-3.4-.6-4.7-1.7-1.3-1.1-1.9-2.9-1.9-5.1v-16.5h-4.6v-3.5h4.6v-7.5h3.8v7.5h6.8v3.5h-6.8v15.3c0,1.5.2,2.6.7,3.3s1.4,1.1,2.8,1.1,1.3,0,1.9-.2,1.1-.3,1.5-.5v3.6c-.5.2-1.1.3-1.9.5s-1.5.2-2.1.2Z"/>
-      <path d="M402,154.4c-2.5,0-4.7-.5-6.5-1.6-1.8-1-3.3-2.6-4.2-4.7-1-2.1-1.5-4.7-1.5-7.8,0-4.6,1-8,3.1-10.3,2.1-2.3,4.9-3.4,8.5-3.4s5.1.6,6.8,1.9c1.7,1.3,2.9,3,3.7,5.1.7,2.2,1.1,4.6,1.1,7.3h-21.3l.3-3.5h18.5l-1.5.5c-.1-2.6-.8-4.6-2-5.9-1.2-1.3-3.1-2-5.6-2s-3.2.3-4.3,1c-1.1.6-2,1.7-2.6,3.3s-.8,3.8-.8,6.6.8,5.7,2.3,7.3c1.5,1.7,3.6,2.5,6.3,2.5s2.5,0,3.6-.3,2.1-.5,3-.8c.9-.4,1.7-.7,2.4-1.2v3.9c-1.3.6-2.7,1.1-4.2,1.4-1.5.3-3.2.5-5.1.5Z"/>
-      <path d="M419.5,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1-1.6.2-2.4.3c-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
-      <path d="M446.4,154.4c-1.9,0-3.5-.2-4.8-.6s-2.6-.9-4-1.6v-4c1.1.6,2.1,1.1,2.9,1.5s1.7.7,2.6.9c.9.2,1.9.3,3,.3,1.8,0,3.2-.4,4.3-1.2,1.1-.8,1.7-1.8,1.7-3s-.3-1.7-.8-2.3-1.2-1-2.1-1.3c-.8-.4-1.7-.7-2.7-1.1-1-.3-2.1-.6-3.1-.9-1-.3-2-.8-2.9-1.3-.9-.5-1.6-1.3-2.1-2.1-.5-.9-.8-2-.8-3.4s.3-2.5.8-3.4c.5-1,1.3-1.7,2.1-2.4.9-.6,1.9-1.1,3-1.4,1.1-.3,2.2-.4,3.3-.4,1.6,0,2.9.2,4.1.6,1.1.4,2.3.9,3.5,1.4v3.8c-1.3-.7-2.5-1.3-3.6-1.7-1.1-.4-2.3-.7-3.8-.7s-2.7.3-3.9.9c-1.1.6-1.7,1.5-1.7,2.7s.3,1.8.9,2.4,1.4,1,2.3,1.4c1,.3,2,.7,3.1,1,.9.3,1.8.6,2.8.9,1,.3,1.8.8,2.7,1.3.8.5,1.5,1.3,2,2.1.5.9.8,2,.8,3.4s-.5,3.4-1.4,4.6-2.2,2.1-3.6,2.7c-1.5.6-3,.8-4.5.8Z"/>
-    </g>
-  </g>
-</svg>

resources/profiles/FELIX Printers/FELIX Pro Series build plate texture.svg

@@ -1,28 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<svg id="a" xmlns="http://www.w3.org/2000/svg" width="180.62mm" height="180.62mm" viewBox="0 0 235 244" xmlns:c2pa="http://c2pa.org/manifest">
-  <rect x="0" y="0" width="235" height="244" fill="none"/>
-  <g fill="#ffffff" transform="translate(2,215) scale(0.1)">
-    <g>
-      <path d="M139.4.8l-.2,62c-34.3,0-63.4,21.8-73.2,51.9C26.4,141,.2,187.8.2,241.3H0l.2-101.3C.2,63.1,62.4.8,139.4.8Z"/>
-      <path d="M139.1,92.5l-.8,62.5c-42.6,0-77.1,38.6-77.1,86.3l1-103.9c0-7.9,1.3-15.5,3.6-22.7,21.2-14.1,46.3-22.3,73.2-22.3Z"/>
-      <path d="M65.9,114.7c-2.3,7.2-3.6,14.8-3.6,22.7l-1,103.9H.2c0-53.5,26.3-100.3,65.7-126.6Z"/>
-    </g>
-    <polygon points="202.8 .4 202.8 92.9 226.2 92.9 226.2 56 259.8 56 259.8 36.1 226.2 36.1 226.2 19.4 265.7 19.4 265.7 0 202.8 .4"/>
-    <polygon points="282.3 -.3 282.3 93 346.1 93 346.1 72.4 306.8 72.4 306.8 55.6 341.7 55.6 341.7 36.4 306.5 36.4 306.5 19.6 346.2 19.6 346.2 -.3 282.3 -.3"/>
-    <polygon points="365.9 92.8 429.5 92.8 429.5 70.9 389.6 70.9 389.6 .2 365 .2 365.9 92.8"/>
-    <polygon points="448 0 471.9 0 471.9 92.5 447.5 92.5 448 0"/>
-    <path d="M485.1,92.5s34.7-44.3,33.4-46.5S485.7,0,485.7,0h29l18.4,24.8L550.1,0h26.6l-29.9,45.4,33.1,46.8h-28.8l-19.3-27.4-18.9,28.1-27.9-.4Z"/>
-    <g>
-      <path d="M210.9,154.1c-1.9,0-3.7-.2-5.3-.7-1.6-.4-3-1-4.2-1.6v-3.9c1.1.6,2.4,1.1,3.9,1.6,1.5.5,3.2.7,5.1.7,3.1,0,5.5-.6,7.2-1.7,1.7-1.2,2.5-2.8,2.5-5s-.8-3.9-2.5-5c-1.7-1.2-4.2-1.7-7.4-1.7h-3.9v-3.7h4c2.6,0,4.5-.5,5.9-1.5,1.4-1,2-2.4,2-4.2s-.3-2.3-1-3.1c-.6-.8-1.6-1.5-2.8-1.9-1.3-.4-2.8-.7-4.6-.7s-3,.2-4.3.6c-1.3.4-2.4.8-3.3,1.3v-3.9c1.1-.5,2.3-.9,3.6-1.3,1.3-.4,2.8-.5,4.5-.5s4,.3,5.5.8c1.5.5,2.7,1.3,3.6,2.2.9.9,1.6,1.9,2,3.1.4,1.1.6,2.3.6,3.4s-.2,2.4-.7,3.3c-.5.9-1,1.7-1.6,2.2-.6.6-1.4,1.1-2.3,1.6,1.3.7,2.3,1.4,3.2,2.1s1.6,1.7,2.2,2.8c.6,1.1,1,2.5,1,4.2s-.2,2.5-.7,3.8c-.5,1.2-1.2,2.4-2.2,3.4s-2.4,1.8-4,2.4c-1.7.6-3.7.9-6.1.9Z"/>
-      <path d="M232.1,153.7v-35.4h11.1c5.5,0,9.7,1.5,12.4,4.4,2.8,3,4.2,7.4,4.2,13.2s-1.4,10.3-4.2,13.2c-2.8,3-6.9,4.5-12.4,4.5h-11.1ZM235.9,150h7c4.5,0,7.8-1.1,9.9-3.4,2-2.3,3.1-5.8,3.1-10.7s-1-8.4-3.1-10.7c-2-2.3-5.3-3.4-9.9-3.4h-7v28.2Z"/>
-      <path d="M291.9,154.4c-.8,0-1.7-.1-2.6-.3-1-.2-1.9-.5-2.8-.8-.9-.3-1.7-.7-2.4-1l1.3-1.3v14.2h-3.8v-33.2c0-1.1.3-2,1-2.7.7-.7,1.6-1.2,2.7-1.6,1.1-.4,2.3-.6,3.5-.8,1.2-.2,2.4-.2,3.5-.2,2.1,0,4.1.4,6,1.3,1.9.9,3.4,2.4,4.6,4.5s1.7,5,1.7,8.6-.5,5.1-1.5,7.1c-1,2-2.4,3.5-4.3,4.6-1.9,1.1-4.2,1.6-6.9,1.6ZM291.9,150.9c1.9,0,3.5-.4,4.8-1.2,1.3-.8,2.2-2,2.8-3.5.6-1.5,1-3.2,1-5.1s-.2-3.7-.6-5.4c-.4-1.7-1.2-3-2.4-4-1.2-1-3-1.5-5.2-1.5s-3.4.2-4.8.6c-1.4.4-2,1-2,1.8v16.4c1.1.6,2.2,1.1,3.3,1.4s2.2.5,3.3.5Z"/>
-      <path d="M311.1,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1c-.8,0-1.6.2-2.4.3-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
-      <path d="M330.5,122.5v-4.2h4.2v4.2h-4.2ZM330.8,153.7v-26.4h3.8v26.4h-3.8Z"/>
-      <path d="M342.7,129.3c.8-.4,1.7-.8,2.6-1.1.9-.3,1.8-.6,2.8-.8.9-.2,1.9-.4,2.9-.5,1-.1,2-.2,2.9-.2,2.6,0,4.6.4,6.1,1.1,1.5.8,2.6,1.9,3.3,3.3.7,1.4,1,3.2,1,5.2v17.2h-3.8v-17.2c0-.6,0-1.3-.2-2-.2-.7-.5-1.4-.9-2-.5-.7-1.2-1.2-2.1-1.6s-2.2-.6-3.8-.6-2.2,0-3.4.3-2.4.4-3.6.8v22.4h-3.8v-24.3Z"/>
-      <path d="M380.7,154.1c-1.9,0-3.4-.6-4.7-1.7-1.3-1.1-1.9-2.9-1.9-5.1v-16.5h-4.6v-3.5h4.6v-7.5h3.8v7.5h6.8v3.5h-6.8v15.3c0,1.5.2,2.6.7,3.3s1.4,1.1,2.8,1.1,1.3,0,1.9-.2,1.1-.3,1.5-.5v3.6c-.5.2-1.1.3-1.9.5s-1.5.2-2.1.2Z"/>
-      <path d="M402,154.4c-2.5,0-4.7-.5-6.5-1.6-1.8-1-3.3-2.6-4.2-4.7-1-2.1-1.5-4.7-1.5-7.8,0-4.6,1-8,3.1-10.3,2.1-2.3,4.9-3.4,8.5-3.4s5.1.6,6.8,1.9c1.7,1.3,2.9,3,3.7,5.1.7,2.2,1.1,4.6,1.1,7.3h-21.3l.3-3.5h18.5l-1.5.5c-.1-2.6-.8-4.6-2-5.9-1.2-1.3-3.1-2-5.6-2s-3.2.3-4.3,1c-1.1.6-2,1.7-2.6,3.3s-.8,3.8-.8,6.6.8,5.7,2.3,7.3c1.5,1.7,3.6,2.5,6.3,2.5s2.5,0,3.6-.3,2.1-.5,3-.8c.9-.4,1.7-.7,2.4-1.2v3.9c-1.3.6-2.7,1.1-4.2,1.4-1.5.3-3.2.5-5.1.5Z"/>
-      <path d="M419.5,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1-1.6.2-2.4.3c-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
-      <path d="M446.4,154.4c-1.9,0-3.5-.2-4.8-.6s-2.6-.9-4-1.6v-4c1.1.6,2.1,1.1,2.9,1.5s1.7.7,2.6.9c.9.2,1.9.3,3,.3,1.8,0,3.2-.4,4.3-1.2,1.1-.8,1.7-1.8,1.7-3s-.3-1.7-.8-2.3-1.2-1-2.1-1.3c-.8-.4-1.7-.7-2.7-1.1-1-.3-2.1-.6-3.1-.9-1-.3-2-.8-2.9-1.3-.9-.5-1.6-1.3-2.1-2.1-.5-.9-.8-2-.8-3.4s.3-2.5.8-3.4c.5-1,1.3-1.7,2.1-2.4.9-.6,1.9-1.1,3-1.4,1.1-.3,2.2-.4,3.3-.4,1.6,0,2.9.2,4.1.6,1.1.4,2.3.9,3.5,1.4v3.8c-1.3-.7-2.5-1.3-3.6-1.7-1.1-.4-2.3-.7-3.8-.7s-2.7.3-3.9.9c-1.1.6-1.7,1.5-1.7,2.7s.3,1.8.9,2.4,1.4,1,2.3,1.4c1,.3,2,.7,3.1,1,.9.3,1.8.6,2.8.9,1,.3,1.8.8,2.7,1.3.8.5,1.5,1.3,2,2.1.5.9.8,2,.8,3.4s-.5,3.4-1.4,4.6-2.2,2.1-3.6,2.7c-1.5.6-3,.8-4.5.8Z"/>
-    </g>
-  </g>
-</svg>

resources/profiles/FELIX Printers/FELIX Pro XL Series build plate.svg

@@ -1,28 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<svg id="a" xmlns="http://www.w3.org/2000/svg" width="180.62mm" height="180.62mm" viewBox="0 0 600 400" xmlns:c2pa="http://c2pa.org/manifest">
-  <rect x="0" y="0" width="600" height="400" fill="none"/>
-  <g fill="#ffffff" transform="translate(4,357) scale(0.16)">
-    <g>
-      <path d="M139.4.8l-.2,62c-34.3,0-63.4,21.8-73.2,51.9C26.4,141,.2,187.8.2,241.3H0l.2-101.3C.2,63.1,62.4.8,139.4.8Z"/>
-      <path d="M139.1,92.5l-.8,62.5c-42.6,0-77.1,38.6-77.1,86.3l1-103.9c0-7.9,1.3-15.5,3.6-22.7,21.2-14.1,46.3-22.3,73.2-22.3Z"/>
-      <path d="M65.9,114.7c-2.3,7.2-3.6,14.8-3.6,22.7l-1,103.9H.2c0-53.5,26.3-100.3,65.7-126.6Z"/>
-    </g>
-    <polygon points="202.8 .4 202.8 92.9 226.2 92.9 226.2 56 259.8 56 259.8 36.1 226.2 36.1 226.2 19.4 265.7 19.4 265.7 0 202.8 .4"/>
-    <polygon points="282.3 -.3 282.3 93 346.1 93 346.1 72.4 306.8 72.4 306.8 55.6 341.7 55.6 341.7 36.4 306.5 36.4 306.5 19.6 346.2 19.6 346.2 -.3 282.3 -.3"/>
-    <polygon points="365.9 92.8 429.5 92.8 429.5 70.9 389.6 70.9 389.6 .2 365 .2 365.9 92.8"/>
-    <polygon points="448 0 471.9 0 471.9 92.5 447.5 92.5 448 0"/>
-    <path d="M485.1,92.5s34.7-44.3,33.4-46.5S485.7,0,485.7,0h29l18.4,24.8L550.1,0h26.6l-29.9,45.4,33.1,46.8h-28.8l-19.3-27.4-18.9,28.1-27.9-.4Z"/>
-    <g>
-      <path d="M210.9,154.1c-1.9,0-3.7-.2-5.3-.7-1.6-.4-3-1-4.2-1.6v-3.9c1.1.6,2.4,1.1,3.9,1.6,1.5.5,3.2.7,5.1.7,3.1,0,5.5-.6,7.2-1.7,1.7-1.2,2.5-2.8,2.5-5s-.8-3.9-2.5-5c-1.7-1.2-4.2-1.7-7.4-1.7h-3.9v-3.7h4c2.6,0,4.5-.5,5.9-1.5,1.4-1,2-2.4,2-4.2s-.3-2.3-1-3.1c-.6-.8-1.6-1.5-2.8-1.9-1.3-.4-2.8-.7-4.6-.7s-3,.2-4.3.6c-1.3.4-2.4.8-3.3,1.3v-3.9c1.1-.5,2.3-.9,3.6-1.3,1.3-.4,2.8-.5,4.5-.5s4,.3,5.5.8c1.5.5,2.7,1.3,3.6,2.2.9.9,1.6,1.9,2,3.1.4,1.1.6,2.3.6,3.4s-.2,2.4-.7,3.3c-.5.9-1,1.7-1.6,2.2-.6.6-1.4,1.1-2.3,1.6,1.3.7,2.3,1.4,3.2,2.1s1.6,1.7,2.2,2.8c.6,1.1,1,2.5,1,4.2s-.2,2.5-.7,3.8c-.5,1.2-1.2,2.4-2.2,3.4s-2.4,1.8-4,2.4c-1.7.6-3.7.9-6.1.9Z"/>
-      <path d="M232.1,153.7v-35.4h11.1c5.5,0,9.7,1.5,12.4,4.4,2.8,3,4.2,7.4,4.2,13.2s-1.4,10.3-4.2,13.2c-2.8,3-6.9,4.5-12.4,4.5h-11.1ZM235.9,150h7c4.5,0,7.8-1.1,9.9-3.4,2-2.3,3.1-5.8,3.1-10.7s-1-8.4-3.1-10.7c-2-2.3-5.3-3.4-9.9-3.4h-7v28.2Z"/>
-      <path d="M291.9,154.4c-.8,0-1.7-.1-2.6-.3-1-.2-1.9-.5-2.8-.8-.9-.3-1.7-.7-2.4-1l1.3-1.3v14.2h-3.8v-33.2c0-1.1.3-2,1-2.7.7-.7,1.6-1.2,2.7-1.6,1.1-.4,2.3-.6,3.5-.8,1.2-.2,2.4-.2,3.5-.2,2.1,0,4.1.4,6,1.3,1.9.9,3.4,2.4,4.6,4.5s1.7,5,1.7,8.6-.5,5.1-1.5,7.1c-1,2-2.4,3.5-4.3,4.6-1.9,1.1-4.2,1.6-6.9,1.6ZM291.9,150.9c1.9,0,3.5-.4,4.8-1.2,1.3-.8,2.2-2,2.8-3.5.6-1.5,1-3.2,1-5.1s-.2-3.7-.6-5.4c-.4-1.7-1.2-3-2.4-4-1.2-1-3-1.5-5.2-1.5s-3.4.2-4.8.6c-1.4.4-2,1-2,1.8v16.4c1.1.6,2.2,1.1,3.3,1.4s2.2.5,3.3.5Z"/>
-      <path d="M311.1,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1c-.8,0-1.6.2-2.4.3-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
-      <path d="M330.5,122.5v-4.2h4.2v4.2h-4.2ZM330.8,153.7v-26.4h3.8v26.4h-3.8Z"/>
-      <path d="M342.7,129.3c.8-.4,1.7-.8,2.6-1.1.9-.3,1.8-.6,2.8-.8.9-.2,1.9-.4,2.9-.5,1-.1,2-.2,2.9-.2,2.6,0,4.6.4,6.1,1.1,1.5.8,2.6,1.9,3.3,3.3.7,1.4,1,3.2,1,5.2v17.2h-3.8v-17.2c0-.6,0-1.3-.2-2-.2-.7-.5-1.4-.9-2-.5-.7-1.2-1.2-2.1-1.6s-2.2-.6-3.8-.6-2.2,0-3.4.3-2.4.4-3.6.8v22.4h-3.8v-24.3Z"/>
-      <path d="M380.7,154.1c-1.9,0-3.4-.6-4.7-1.7-1.3-1.1-1.9-2.9-1.9-5.1v-16.5h-4.6v-3.5h4.6v-7.5h3.8v7.5h6.8v3.5h-6.8v15.3c0,1.5.2,2.6.7,3.3s1.4,1.1,2.8,1.1,1.3,0,1.9-.2,1.1-.3,1.5-.5v3.6c-.5.2-1.1.3-1.9.5s-1.5.2-2.1.2Z"/>
-      <path d="M402,154.4c-2.5,0-4.7-.5-6.5-1.6-1.8-1-3.3-2.6-4.2-4.7-1-2.1-1.5-4.7-1.5-7.8,0-4.6,1-8,3.1-10.3,2.1-2.3,4.9-3.4,8.5-3.4s5.1.6,6.8,1.9c1.7,1.3,2.9,3,3.7,5.1.7,2.2,1.1,4.6,1.1,7.3h-21.3l.3-3.5h18.5l-1.5.5c-.1-2.6-.8-4.6-2-5.9-1.2-1.3-3.1-2-5.6-2s-3.2.3-4.3,1c-1.1.6-2,1.7-2.6,3.3s-.8,3.8-.8,6.6.8,5.7,2.3,7.3c1.5,1.7,3.6,2.5,6.3,2.5s2.5,0,3.6-.3,2.1-.5,3-.8c.9-.4,1.7-.7,2.4-1.2v3.9c-1.3.6-2.7,1.1-4.2,1.4-1.5.3-3.2.5-5.1.5Z"/>
-      <path d="M419.5,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1-1.6.2-2.4.3c-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
-      <path d="M446.4,154.4c-1.9,0-3.5-.2-4.8-.6s-2.6-.9-4-1.6v-4c1.1.6,2.1,1.1,2.9,1.5s1.7.7,2.6.9c.9.2,1.9.3,3,.3,1.8,0,3.2-.4,4.3-1.2,1.1-.8,1.7-1.8,1.7-3s-.3-1.7-.8-2.3-1.2-1-2.1-1.3c-.8-.4-1.7-.7-2.7-1.1-1-.3-2.1-.6-3.1-.9-1-.3-2-.8-2.9-1.3-.9-.5-1.6-1.3-2.1-2.1-.5-.9-.8-2-.8-3.4s.3-2.5.8-3.4c.5-1,1.3-1.7,2.1-2.4.9-.6,1.9-1.1,3-1.4,1.1-.3,2.2-.4,3.3-.4,1.6,0,2.9.2,4.1.6,1.1.4,2.3.9,3.5,1.4v3.8c-1.3-.7-2.5-1.3-3.6-1.7-1.1-.4-2.3-.7-3.8-.7s-2.7.3-3.9.9c-1.1.6-1.7,1.5-1.7,2.7s.3,1.8.9,2.4,1.4,1,2.3,1.4c1,.3,2,.7,3.1,1,.9.3,1.8.6,2.8.9,1,.3,1.8.8,2.7,1.3.8.5,1.5,1.3,2,2.1.5.9.8,2,.8,3.4s-.5,3.4-1.4,4.6-2.2,2.1-3.6,2.7c-1.5.6-3,.8-4.5.8Z"/>
-    </g>
-  </g>
-</svg>

resources/profiles/FELIX Printers/FELIX Tec 4 Series build plate.svg

@@ -1,28 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<svg id="a" xmlns="http://www.w3.org/2000/svg" width="180.62mm" height="180.62mm" viewBox="0 0 205 255" xmlns:c2pa="http://c2pa.org/manifest">
-  <rect x="0" y="0" width="205" height="255" fill="none"/>
-  <g fill="#ffffff" transform="translate(3,228) scale(0.1)">
-    <g>
-      <path d="M139.4.8l-.2,62c-34.3,0-63.4,21.8-73.2,51.9C26.4,141,.2,187.8.2,241.3H0l.2-101.3C.2,63.1,62.4.8,139.4.8Z"/>
-      <path d="M139.1,92.5l-.8,62.5c-42.6,0-77.1,38.6-77.1,86.3l1-103.9c0-7.9,1.3-15.5,3.6-22.7,21.2-14.1,46.3-22.3,73.2-22.3Z"/>
-      <path d="M65.9,114.7c-2.3,7.2-3.6,14.8-3.6,22.7l-1,103.9H.2c0-53.5,26.3-100.3,65.7-126.6Z"/>
-    </g>
-    <polygon points="202.8 .4 202.8 92.9 226.2 92.9 226.2 56 259.8 56 259.8 36.1 226.2 36.1 226.2 19.4 265.7 19.4 265.7 0 202.8 .4"/>
-    <polygon points="282.3 -.3 282.3 93 346.1 93 346.1 72.4 306.8 72.4 306.8 55.6 341.7 55.6 341.7 36.4 306.5 36.4 306.5 19.6 346.2 19.6 346.2 -.3 282.3 -.3"/>
-    <polygon points="365.9 92.8 429.5 92.8 429.5 70.9 389.6 70.9 389.6 .2 365 .2 365.9 92.8"/>
-    <polygon points="448 0 471.9 0 471.9 92.5 447.5 92.5 448 0"/>
-    <path d="M485.1,92.5s34.7-44.3,33.4-46.5S485.7,0,485.7,0h29l18.4,24.8L550.1,0h26.6l-29.9,45.4,33.1,46.8h-28.8l-19.3-27.4-18.9,28.1-27.9-.4Z"/>
-    <g>
-      <path d="M210.9,154.1c-1.9,0-3.7-.2-5.3-.7-1.6-.4-3-1-4.2-1.6v-3.9c1.1.6,2.4,1.1,3.9,1.6,1.5.5,3.2.7,5.1.7,3.1,0,5.5-.6,7.2-1.7,1.7-1.2,2.5-2.8,2.5-5s-.8-3.9-2.5-5c-1.7-1.2-4.2-1.7-7.4-1.7h-3.9v-3.7h4c2.6,0,4.5-.5,5.9-1.5,1.4-1,2-2.4,2-4.2s-.3-2.3-1-3.1c-.6-.8-1.6-1.5-2.8-1.9-1.3-.4-2.8-.7-4.6-.7s-3,.2-4.3.6c-1.3.4-2.4.8-3.3,1.3v-3.9c1.1-.5,2.3-.9,3.6-1.3,1.3-.4,2.8-.5,4.5-.5s4,.3,5.5.8c1.5.5,2.7,1.3,3.6,2.2.9.9,1.6,1.9,2,3.1.4,1.1.6,2.3.6,3.4s-.2,2.4-.7,3.3c-.5.9-1,1.7-1.6,2.2-.6.6-1.4,1.1-2.3,1.6,1.3.7,2.3,1.4,3.2,2.1s1.6,1.7,2.2,2.8c.6,1.1,1,2.5,1,4.2s-.2,2.5-.7,3.8c-.5,1.2-1.2,2.4-2.2,3.4s-2.4,1.8-4,2.4c-1.7.6-3.7.9-6.1.9Z"/>
-      <path d="M232.1,153.7v-35.4h11.1c5.5,0,9.7,1.5,12.4,4.4,2.8,3,4.2,7.4,4.2,13.2s-1.4,10.3-4.2,13.2c-2.8,3-6.9,4.5-12.4,4.5h-11.1ZM235.9,150h7c4.5,0,7.8-1.1,9.9-3.4,2-2.3,3.1-5.8,3.1-10.7s-1-8.4-3.1-10.7c-2-2.3-5.3-3.4-9.9-3.4h-7v28.2Z"/>
-      <path d="M291.9,154.4c-.8,0-1.7-.1-2.6-.3-1-.2-1.9-.5-2.8-.8-.9-.3-1.7-.7-2.4-1l1.3-1.3v14.2h-3.8v-33.2c0-1.1.3-2,1-2.7.7-.7,1.6-1.2,2.7-1.6,1.1-.4,2.3-.6,3.5-.8,1.2-.2,2.4-.2,3.5-.2,2.1,0,4.1.4,6,1.3,1.9.9,3.4,2.4,4.6,4.5s1.7,5,1.7,8.6-.5,5.1-1.5,7.1c-1,2-2.4,3.5-4.3,4.6-1.9,1.1-4.2,1.6-6.9,1.6ZM291.9,150.9c1.9,0,3.5-.4,4.8-1.2,1.3-.8,2.2-2,2.8-3.5.6-1.5,1-3.2,1-5.1s-.2-3.7-.6-5.4c-.4-1.7-1.2-3-2.4-4-1.2-1-3-1.5-5.2-1.5s-3.4.2-4.8.6c-1.4.4-2,1-2,1.8v16.4c1.1.6,2.2,1.1,3.3,1.4s2.2.5,3.3.5Z"/>
-      <path d="M311.1,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1c-.8,0-1.6.2-2.4.3-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
-      <path d="M330.5,122.5v-4.2h4.2v4.2h-4.2ZM330.8,153.7v-26.4h3.8v26.4h-3.8Z"/>
-      <path d="M342.7,129.3c.8-.4,1.7-.8,2.6-1.1.9-.3,1.8-.6,2.8-.8.9-.2,1.9-.4,2.9-.5,1-.1,2-.2,2.9-.2,2.6,0,4.6.4,6.1,1.1,1.5.8,2.6,1.9,3.3,3.3.7,1.4,1,3.2,1,5.2v17.2h-3.8v-17.2c0-.6,0-1.3-.2-2-.2-.7-.5-1.4-.9-2-.5-.7-1.2-1.2-2.1-1.6s-2.2-.6-3.8-.6-2.2,0-3.4.3-2.4.4-3.6.8v22.4h-3.8v-24.3Z"/>
-      <path d="M380.7,154.1c-1.9,0-3.4-.6-4.7-1.7-1.3-1.1-1.9-2.9-1.9-5.1v-16.5h-4.6v-3.5h4.6v-7.5h3.8v7.5h6.8v3.5h-6.8v15.3c0,1.5.2,2.6.7,3.3s1.4,1.1,2.8,1.1,1.3,0,1.9-.2,1.1-.3,1.5-.5v3.6c-.5.2-1.1.3-1.9.5s-1.5.2-2.1.2Z"/>
-      <path d="M402,154.4c-2.5,0-4.7-.5-6.5-1.6-1.8-1-3.3-2.6-4.2-4.7-1-2.1-1.5-4.7-1.5-7.8,0-4.6,1-8,3.1-10.3,2.1-2.3,4.9-3.4,8.5-3.4s5.1.6,6.8,1.9c1.7,1.3,2.9,3,3.7,5.1.7,2.2,1.1,4.6,1.1,7.3h-21.3l.3-3.5h18.5l-1.5.5c-.1-2.6-.8-4.6-2-5.9-1.2-1.3-3.1-2-5.6-2s-3.2.3-4.3,1c-1.1.6-2,1.7-2.6,3.3s-.8,3.8-.8,6.6.8,5.7,2.3,7.3c1.5,1.7,3.6,2.5,6.3,2.5s2.5,0,3.6-.3,2.1-.5,3-.8c.9-.4,1.7-.7,2.4-1.2v3.9c-1.3.6-2.7,1.1-4.2,1.4-1.5.3-3.2.5-5.1.5Z"/>
-      <path d="M419.5,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1-1.6.2-2.4.3c-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
-      <path d="M446.4,154.4c-1.9,0-3.5-.2-4.8-.6s-2.6-.9-4-1.6v-4c1.1.6,2.1,1.1,2.9,1.5s1.7.7,2.6.9c.9.2,1.9.3,3,.3,1.8,0,3.2-.4,4.3-1.2,1.1-.8,1.7-1.8,1.7-3s-.3-1.7-.8-2.3-1.2-1-2.1-1.3c-.8-.4-1.7-.7-2.7-1.1-1-.3-2.1-.6-3.1-.9-1-.3-2-.8-2.9-1.3-.9-.5-1.6-1.3-2.1-2.1-.5-.9-.8-2-.8-3.4s.3-2.5.8-3.4c.5-1,1.3-1.7,2.1-2.4.9-.6,1.9-1.1,3-1.4,1.1-.3,2.2-.4,3.3-.4,1.6,0,2.9.2,4.1.6,1.1.4,2.3.9,3.5,1.4v3.8c-1.3-.7-2.5-1.3-3.6-1.7-1.1-.4-2.3-.7-3.8-.7s-2.7.3-3.9.9c-1.1.6-1.7,1.5-1.7,2.7s.3,1.8.9,2.4,1.4,1,2.3,1.4c1,.3,2,.7,3.1,1,.9.3,1.8.6,2.8.9,1,.3,1.8.8,2.7,1.3.8.5,1.5,1.3,2,2.1.5.9.8,2,.8,3.4s-.5,3.4-1.4,4.6-2.2,2.1-3.6,2.7c-1.5.6-3,.8-4.5.8Z"/>
-    </g>
-  </g>
-</svg>

resources/profiles/FELIX Printers/filament/FELIXFood/Food Medium Plastic Syringe @0.50mm.json

@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Medium Plastic  Syringe  @0.50mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "tMekgIpgrPXZGclm",
-  "filament_id": "OFcHPSYQ",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 0.50mm nozzle",
-    "FELIX Food Double 0.50mm nozzle",
-    "FELIX Food Switch 0.50mm nozzle"
-  ],
-  "filament_diameter": [
-    "31.22"
-  ],
-  "filament_flow_ratio": [
-    "1.05"
-  ],
-  "filament_retraction_length": [
-    "3.0"
-  ],
-  "filament_retract_restart_extra": [
-    "0.0"
-  ],
-  "filament_retraction_speed": [
-    "5.0"
-  ],
-  "filament_deretraction_speed": [
-    "5.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "6.0"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "0.75"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "7.2"
-  ]
-}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Medium Plastic Syringe @1.00mm.json

@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Medium Plastic  Syringe  @1.00mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "crqtmO3TPNKSFBlk",
-  "filament_id": "OFcHPSYQ",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 1.00mm nozzle",
-    "FELIX Food Double 1.00mm nozzle",
-    "FELIX Food Switch 1.00mm nozzle"
-  ],
-  "filament_diameter": [
-    "31.22"
-  ],
-  "filament_flow_ratio": [
-    "1.05"
-  ],
-  "filament_retraction_length": [
-    "3.0"
-  ],
-  "filament_retract_restart_extra": [
-    "0.0"
-  ],
-  "filament_retraction_speed": [
-    "5.0"
-  ],
-  "filament_deretraction_speed": [
-    "5.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "6.0"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "1.5"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "27.0"
-  ]
-}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Medium Plastic Syringe @2.00mm.json

@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Medium Plastic  Syringe  @2.00mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "IvLdEN3jtyN4UMEs",
-  "filament_id": "OFcHPSYQ",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 2.00mm nozzle",
-    "FELIX Food Double 2.00mm nozzle",
-    "FELIX Food Switch 2.00mm nozzle"
-  ],
-  "filament_diameter": [
-    "31.22"
-  ],
-  "filament_flow_ratio": [
-    "1.05"
-  ],
-  "filament_retraction_length": [
-    "3.0"
-  ],
-  "filament_retract_restart_extra": [
-    "0.0"
-  ],
-  "filament_retraction_speed": [
-    "5.0"
-  ],
-  "filament_deretraction_speed": [
-    "5.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "6.0"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "3.0"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "108.0"
-  ]
-}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Medium Plastic Syringe @3.00mm.json

@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Medium Plastic  Syringe  @3.00mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "OX0aVYNFcX00KurB",
-  "filament_id": "OFcHPSYQ",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 3.00mm nozzle",
-    "FELIX Food Double 3.00mm nozzle",
-    "FELIX Food Switch 3.00mm nozzle"
-  ],
-  "filament_diameter": [
-    "31.22"
-  ],
-  "filament_flow_ratio": [
-    "1.05"
-  ],
-  "filament_retraction_length": [
-    "3.0"
-  ],
-  "filament_retract_restart_extra": [
-    "0.0"
-  ],
-  "filament_retraction_speed": [
-    "5.0"
-  ],
-  "filament_deretraction_speed": [
-    "5.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "6.0"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "4.5"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "216.0"
-  ]
-}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Medium Plastic Syringe @4.00mm.json

@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Medium Plastic  Syringe  @4.00mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "cPdxKT14h52CpmgV",
-  "filament_id": "OFcHPSYQ",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 4.00mm nozzle",
-    "FELIX Food Double 4.00mm nozzle",
-    "FELIX Food Switch 4.00mm nozzle"
-  ],
-  "filament_diameter": [
-    "31.22"
-  ],
-  "filament_flow_ratio": [
-    "1.05"
-  ],
-  "filament_retraction_length": [
-    "3.0"
-  ],
-  "filament_retract_restart_extra": [
-    "0.0"
-  ],
-  "filament_retraction_speed": [
-    "5.0"
-  ],
-  "filament_deretraction_speed": [
-    "5.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "6.0"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "6.0"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "432.0"
-  ]
-}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Medium Stainless Steel Syringe @0.50mm.json

@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Medium Stainless Steel  Syringe  @0.50mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "uYPjYKCYH20fLFrd",
-  "filament_id": "OF77udLK",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 0.50mm nozzle",
-    "FELIX Food Double 0.50mm nozzle",
-    "FELIX Food Switch 0.50mm nozzle"
-  ],
-  "filament_diameter": [
-    "25.4"
-  ],
-  "filament_flow_ratio": [
-    "1.05"
-  ],
-  "filament_retraction_length": [
-    "1.0"
-  ],
-  "filament_retract_restart_extra": [
-    "0.0"
-  ],
-  "filament_retraction_speed": [
-    "10.0"
-  ],
-  "filament_deretraction_speed": [
-    "10.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "2.0"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "0.75"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "7.2"
-  ]
-}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Medium Stainless Steel Syringe @1.00mm.json

@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Medium Stainless Steel  Syringe  @1.00mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "tDzkw7EWmdzVkiX7",
-  "filament_id": "OF77udLK",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 1.00mm nozzle",
-    "FELIX Food Double 1.00mm nozzle",
-    "FELIX Food Switch 1.00mm nozzle"
-  ],
-  "filament_diameter": [
-    "25.4"
-  ],
-  "filament_flow_ratio": [
-    "1.05"
-  ],
-  "filament_retraction_length": [
-    "1.0"
-  ],
-  "filament_retract_restart_extra": [
-    "0.0"
-  ],
-  "filament_retraction_speed": [
-    "10.0"
-  ],
-  "filament_deretraction_speed": [
-    "10.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "2.0"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "1.5"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "27.0"
-  ]
-}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Medium Stainless Steel Syringe @2.00mm.json

@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Medium Stainless Steel  Syringe  @2.00mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "MRbFNPR0OlTvFM5I",
-  "filament_id": "OF77udLK",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 2.00mm nozzle",
-    "FELIX Food Double 2.00mm nozzle",
-    "FELIX Food Switch 2.00mm nozzle"
-  ],
-  "filament_diameter": [
-    "25.4"
-  ],
-  "filament_flow_ratio": [
-    "1.05"
-  ],
-  "filament_retraction_length": [
-    "1.0"
-  ],
-  "filament_retract_restart_extra": [
-    "0.0"
-  ],
-  "filament_retraction_speed": [
-    "10.0"
-  ],
-  "filament_deretraction_speed": [
-    "10.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "2.0"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "3.0"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "108.0"
-  ]
-}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Medium Stainless Steel Syringe @3.00mm.json

@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Medium Stainless Steel  Syringe  @3.00mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "2p6yFR6dcGP5ywnE",
-  "filament_id": "OF77udLK",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 3.00mm nozzle",
-    "FELIX Food Double 3.00mm nozzle",
-    "FELIX Food Switch 3.00mm nozzle"
-  ],
-  "filament_diameter": [
-    "25.4"
-  ],
-  "filament_flow_ratio": [
-    "1.05"
-  ],
-  "filament_retraction_length": [
-    "1.0"
-  ],
-  "filament_retract_restart_extra": [
-    "0.0"
-  ],
-  "filament_retraction_speed": [
-    "10.0"
-  ],
-  "filament_deretraction_speed": [
-    "10.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "2.0"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "4.5"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "216.0"
-  ]
-}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Medium Stainless Steel Syringe @4.00mm.json

@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Medium Stainless Steel  Syringe  @4.00mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "tJcWbrFnSjwVQ6hU",
-  "filament_id": "OF77udLK",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 4.00mm nozzle",
-    "FELIX Food Double 4.00mm nozzle",
-    "FELIX Food Switch 4.00mm nozzle"
-  ],
-  "filament_diameter": [
-    "25.4"
-  ],
-  "filament_flow_ratio": [
-    "1.05"
-  ],
-  "filament_retraction_length": [
-    "1.0"
-  ],
-  "filament_retract_restart_extra": [
-    "0.0"
-  ],
-  "filament_retraction_speed": [
-    "10.0"
-  ],
-  "filament_deretraction_speed": [
-    "10.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "2.0"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "6.0"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "432.0"
-  ]
-}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Thick Stainless Steel Syringe @0.50mm.json

@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Thick Stainless Steel  Syringe  @0.50mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "Nn0oJhhVTQeV6XSs",
-  "filament_id": "OFe3TwQN",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 0.50mm nozzle",
-    "FELIX Food Double 0.50mm nozzle",
-    "FELIX Food Switch 0.50mm nozzle"
-  ],
-  "filament_diameter": [
-    "25.4"
-  ],
-  "filament_flow_ratio": [
-    "1.02"
-  ],
-  "filament_retraction_length": [
-    "2.0"
-  ],
-  "filament_retract_restart_extra": [
-    "0.0"
-  ],
-  "filament_retraction_speed": [
-    "5.0"
-  ],
-  "filament_deretraction_speed": [
-    "5.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "4.0"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "0.75"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "4.8"
-  ]
-}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Thick Stainless Steel Syringe @1.00mm.json

@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Thick Stainless Steel  Syringe  @1.00mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "PxeVnjEvcpckYbpa",
-  "filament_id": "OFe3TwQN",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 1.00mm nozzle",
-    "FELIX Food Double 1.00mm nozzle",
-    "FELIX Food Switch 1.00mm nozzle"
-  ],
-  "filament_diameter": [
-    "25.4"
-  ],
-  "filament_flow_ratio": [
-    "1.02"
-  ],
-  "filament_retraction_length": [
-    "2.0"
-  ],
-  "filament_retract_restart_extra": [
-    "0.0"
-  ],
-  "filament_retraction_speed": [
-    "5.0"
-  ],
-  "filament_deretraction_speed": [
-    "5.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "4.0"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "1.5"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "18.0"
-  ]
-}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Thick Stainless Steel Syringe @2.00mm.json

@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Thick Stainless Steel  Syringe  @2.00mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "8otrG4XC7QPqQKuT",
-  "filament_id": "OFe3TwQN",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 2.00mm nozzle",
-    "FELIX Food Double 2.00mm nozzle",
-    "FELIX Food Switch 2.00mm nozzle"
-  ],
-  "filament_diameter": [
-    "25.4"
-  ],
-  "filament_flow_ratio": [
-    "1.02"
-  ],
-  "filament_retraction_length": [
-    "2.0"
-  ],
-  "filament_retract_restart_extra": [
-    "0.0"
-  ],
-  "filament_retraction_speed": [
-    "5.0"
-  ],
-  "filament_deretraction_speed": [
-    "5.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "4.0"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "3.0"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "72.0"
-  ]
-}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Thick Stainless Steel Syringe @3.00mm.json

@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Thick Stainless Steel  Syringe  @3.00mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "fZ7h1dGQB3Xle8wT",
-  "filament_id": "OFe3TwQN",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 3.00mm nozzle",
-    "FELIX Food Double 3.00mm nozzle",
-    "FELIX Food Switch 3.00mm nozzle"
-  ],
-  "filament_diameter": [
-    "25.4"
-  ],
-  "filament_flow_ratio": [
-    "1.02"
-  ],
-  "filament_retraction_length": [
-    "2.0"
-  ],
-  "filament_retract_restart_extra": [
-    "0.0"
-  ],
-  "filament_retraction_speed": [
-    "5.0"
-  ],
-  "filament_deretraction_speed": [
-    "5.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "4.0"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "4.5"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "144.0"
-  ]
-}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Thick Stainless Steel Syringe @4.00mm.json

@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Thick Stainless Steel  Syringe  @4.00mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "7eZfy2RnDhmDdzRl",
-  "filament_id": "OFe3TwQN",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 4.00mm nozzle",
-    "FELIX Food Double 4.00mm nozzle",
-    "FELIX Food Switch 4.00mm nozzle"
-  ],
-  "filament_diameter": [
-    "25.4"
-  ],
-  "filament_flow_ratio": [
-    "1.02"
-  ],
-  "filament_retraction_length": [
-    "2.0"
-  ],
-  "filament_retract_restart_extra": [
-    "0.0"
-  ],
-  "filament_retraction_speed": [
-    "5.0"
-  ],
-  "filament_deretraction_speed": [
-    "5.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "4.0"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "6.0"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "288.0"
-  ]
-}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Thin Plastic Syringe @0.50mm.json

@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Thin Plastic  Syringe  @0.50mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "SIQIE6rj7JxxF81f",
-  "filament_id": "OFE0grJq",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 0.50mm nozzle",
-    "FELIX Food Double 0.50mm nozzle",
-    "FELIX Food Switch 0.50mm nozzle"
-  ],
-  "filament_diameter": [
-    "31.22"
-  ],
-  "filament_flow_ratio": [
-    "1.1"
-  ],
-  "filament_retraction_length": [
-    "0.75"
-  ],
-  "filament_retract_restart_extra": [
-    "0.0"
-  ],
-  "filament_retraction_speed": [
-    "5.0"
-  ],
-  "filament_deretraction_speed": [
-    "5.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "1.5"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "0.75"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "10.8"
-  ]
-}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Thin Plastic Syringe @1.00mm.json

@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Thin Plastic  Syringe  @1.00mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "iuJIPGeN2q6hw3dR",
-  "filament_id": "OFE0grJq",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 1.00mm nozzle",
-    "FELIX Food Double 1.00mm nozzle",
-    "FELIX Food Switch 1.00mm nozzle"
-  ],
-  "filament_diameter": [
-    "31.22"
-  ],
-  "filament_flow_ratio": [
-    "1.1"
-  ],
-  "filament_retraction_length": [
-    "0.75"
-  ],
-  "filament_retract_restart_extra": [
-    "0.0"
-  ],
-  "filament_retraction_speed": [
-    "5.0"
-  ],
-  "filament_deretraction_speed": [
-    "5.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "1.5"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "1.5"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "40.5"
-  ]
-}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Thin Plastic Syringe @2.00mm.json

@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Thin Plastic  Syringe  @2.00mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "QG1CCkHPaL4q4klZ",
-  "filament_id": "OFE0grJq",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 2.00mm nozzle",
-    "FELIX Food Double 2.00mm nozzle",
-    "FELIX Food Switch 2.00mm nozzle"
-  ],
-  "filament_diameter": [
-    "31.22"
-  ],
-  "filament_flow_ratio": [
-    "1.1"
-  ],
-  "filament_retraction_length": [
-    "0.75"
-  ],
-  "filament_retract_restart_extra": [
-    "0.0"
-  ],
-  "filament_retraction_speed": [
-    "5.0"
-  ],
-  "filament_deretraction_speed": [
-    "5.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "1.5"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "3.0"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "162.0"
-  ]
-}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Thin Plastic Syringe @3.00mm.json

@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Thin Plastic  Syringe  @3.00mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "3tmuEN4OqGeBI19I",
-  "filament_id": "OFE0grJq",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 3.00mm nozzle",
-    "FELIX Food Double 3.00mm nozzle",
-    "FELIX Food Switch 3.00mm nozzle"
-  ],
-  "filament_diameter": [
-    "31.22"
-  ],
-  "filament_flow_ratio": [
-    "1.1"
-  ],
-  "filament_retraction_length": [
-    "0.75"
-  ],
-  "filament_retract_restart_extra": [
-    "0.0"
-  ],
-  "filament_retraction_speed": [
-    "5.0"
-  ],
-  "filament_deretraction_speed": [
-    "5.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "1.5"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "4.5"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "324.0"
-  ]
-}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Thin Plastic Syringe @4.00mm.json

@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Thin Plastic  Syringe  @4.00mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "0Ec86Sjnmy3absBs",
-  "filament_id": "OFE0grJq",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 4.00mm nozzle",
-    "FELIX Food Double 4.00mm nozzle",
-    "FELIX Food Switch 4.00mm nozzle"
-  ],
-  "filament_diameter": [
-    "31.22"
-  ],
-  "filament_flow_ratio": [
-    "1.1"
-  ],
-  "filament_retraction_length": [
-    "0.75"
-  ],
-  "filament_retract_restart_extra": [
-    "0.0"
-  ],
-  "filament_retraction_speed": [
-    "5.0"
-  ],
-  "filament_deretraction_speed": [
-    "5.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "1.5"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "6.0"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "648.0"
-  ]
-}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Thin Stainless Steel Syringe @0.50mm.json

@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Thin Stainless Steel  Syringe  @0.50mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "02RBUoG5wlnS7QpG",
-  "filament_id": "OFKLDj2M",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 0.50mm nozzle",
-    "FELIX Food Double 0.50mm nozzle",
-    "FELIX Food Switch 0.50mm nozzle"
-  ],
-  "filament_diameter": [
-    "25.4"
-  ],
-  "filament_flow_ratio": [
-    "1.1"
-  ],
-  "filament_retraction_length": [
-    "0.2"
-  ],
-  "filament_retract_restart_extra": [
-    "0.0"
-  ],
-  "filament_retraction_speed": [
-    "10.0"
-  ],
-  "filament_deretraction_speed": [
-    "10.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "0.4"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "0.75"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "10.8"
-  ]
-}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Thin Stainless Steel Syringe @1.00mm.json

@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Thin Stainless Steel  Syringe  @1.00mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "s9UK5dyo3oJICwZf",
-  "filament_id": "OFKLDj2M",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 1.00mm nozzle",
-    "FELIX Food Double 1.00mm nozzle",
-    "FELIX Food Switch 1.00mm nozzle"
-  ],
-  "filament_diameter": [
-    "25.4"
-  ],
-  "filament_flow_ratio": [
-    "1.1"
-  ],
-  "filament_retraction_length": [
-    "0.2"
-  ],
-  "filament_retract_restart_extra": [
-    "0.0"
-  ],
-  "filament_retraction_speed": [
-    "10.0"
-  ],
-  "filament_deretraction_speed": [
-    "10.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "0.4"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "1.5"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "40.5"
-  ]
-}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Thin Stainless Steel Syringe @2.00mm.json

@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Thin Stainless Steel  Syringe  @2.00mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "vYKSM2VM9UHzprt9",
-  "filament_id": "OFKLDj2M",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 2.00mm nozzle",
-    "FELIX Food Double 2.00mm nozzle",
-    "FELIX Food Switch 2.00mm nozzle"
-  ],
-  "filament_diameter": [
-    "25.4"
-  ],
-  "filament_flow_ratio": [
-    "1.1"
-  ],
-  "filament_retraction_length": [
-    "0.2"
-  ],
-  "filament_retract_restart_extra": [
-    "0.0"
-  ],
-  "filament_retraction_speed": [
-    "10.0"
-  ],
-  "filament_deretraction_speed": [
-    "10.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "0.4"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "3.0"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "162.0"
-  ]
-}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Thin Stainless Steel Syringe @3.00mm.json

@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Thin Stainless Steel  Syringe  @3.00mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "KdNZLCIGmKJYexFg",
-  "filament_id": "OFKLDj2M",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 3.00mm nozzle",
-    "FELIX Food Double 3.00mm nozzle",
-    "FELIX Food Switch 3.00mm nozzle"
-  ],
-  "filament_diameter": [
-    "25.4"
-  ],
-  "filament_flow_ratio": [
-    "1.1"
-  ],
-  "filament_retraction_length": [
-    "0.2"
-  ],
-  "filament_retract_restart_extra": [
-    "0.0"
-  ],
-  "filament_retraction_speed": [
-    "10.0"
-  ],
-  "filament_deretraction_speed": [
-    "10.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "0.4"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "4.5"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "324.0"
-  ]
-}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Thin Stainless Steel Syringe @4.00mm.json

@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Thin Stainless Steel  Syringe  @4.00mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "j9iWTrl4kYZfHjWW",
-  "filament_id": "OFKLDj2M",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 4.00mm nozzle",
-    "FELIX Food Double 4.00mm nozzle",
-    "FELIX Food Switch 4.00mm nozzle"
-  ],
-  "filament_diameter": [
-    "25.4"
-  ],
-  "filament_flow_ratio": [
-    "1.1"
-  ],
-  "filament_retraction_length": [
-    "0.2"
-  ],
-  "filament_retract_restart_extra": [
-    "0.0"
-  ],
-  "filament_retraction_speed": [
-    "10.0"
-  ],
-  "filament_deretraction_speed": [
-    "10.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "0.4"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "6.0"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "648.0"
-  ]
-}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Very Thick Stainless Steel Syringe @1.00mm.json

@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Very Thick Stainless Steel  Syringe  @1.00mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "n0IMp9AxOpjpCHxP",
-  "filament_id": "OFm5jtRu",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 1.00mm nozzle",
-    "FELIX Food Double 1.00mm nozzle",
-    "FELIX Food Switch 1.00mm nozzle"
-  ],
-  "filament_diameter": [
-    "25.4"
-  ],
-  "filament_flow_ratio": [
-    "1.0"
-  ],
-  "filament_retraction_length": [
-    "2.0"
-  ],
-  "filament_retract_restart_extra": [
-    "0.0"
-  ],
-  "filament_retraction_speed": [
-    "5.0"
-  ],
-  "filament_deretraction_speed": [
-    "5.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "4.0"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "0.75"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "13.5"
-  ]
-}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Very Thick Stainless Steel Syringe @2.00mm.json

@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Very Thick Stainless Steel  Syringe  @2.00mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "Mm7YAezpHqJuoQiE",
-  "filament_id": "OFm5jtRu",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 2.00mm nozzle",
-    "FELIX Food Double 2.00mm nozzle",
-    "FELIX Food Switch 2.00mm nozzle"
-  ],
-  "filament_diameter": [
-    "25.4"
-  ],
-  "filament_flow_ratio": [
-    "1.0"
-  ],
-  "filament_retraction_length": [
-    "2.0"
-  ],
-  "filament_retract_restart_extra": [
-    "0.0"
-  ],
-  "filament_retraction_speed": [
-    "5.0"
-  ],
-  "filament_deretraction_speed": [
-    "5.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "4.0"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "1.5"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "53.0"
-  ]
-}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Very Thick Stainless Steel Syringe @3.00mm.json

@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Very Thick Stainless Steel  Syringe  @3.00mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "0ySXw7PXNvxrGBPG",
-  "filament_id": "OFm5jtRu",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 3.00mm nozzle",
-    "FELIX Food Double 3.00mm nozzle",
-    "FELIX Food Switch 3.00mm nozzle"
-  ],
-  "filament_diameter": [
-    "25.4"
-  ],
-  "filament_flow_ratio": [
-    "1.0"
-  ],
-  "filament_retraction_length": [
-    "2.0"
-  ],
-  "filament_retract_restart_extra": [
-    "0.0"
-  ],
-  "filament_retraction_speed": [
-    "5.0"
-  ],
-  "filament_deretraction_speed": [
-    "5.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "4.0"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "3.0"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "108.0"
-  ]
-}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Very Thick Stainless Steel Syringe @4.00mm.json

@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Very Thick Stainless Steel  Syringe  @4.00mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "bSBqhGh8BL7FFJgx",
-  "filament_id": "OFm5jtRu",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 4.00mm nozzle",
-    "FELIX Food Double 4.00mm nozzle",
-    "FELIX Food Switch 4.00mm nozzle"
-  ],
-  "filament_diameter": [
-    "25.4"
-  ],
-  "filament_flow_ratio": [
-    "1.0"
-  ],
-  "filament_retraction_length": [
-    "2.0"
-  ],
-  "filament_retract_restart_extra": [
-    "0.0"
-  ],
-  "filament_retraction_speed": [
-    "5.0"
-  ],
-  "filament_deretraction_speed": [
-    "5.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "4.0"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "4.5"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "216.0"
-  ]
-}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Very Thin Plastic Syringe @0.50mm.json

@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Very Thin Plastic  Syringe  @0.50mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "ACTaCnlbjTyufNFV",
-  "filament_id": "OFzTKnYA",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 0.50mm nozzle",
-    "FELIX Food Double 0.50mm nozzle",
-    "FELIX Food Switch 0.50mm nozzle"
-  ],
-  "filament_diameter": [
-    "31.22"
-  ],
-  "filament_flow_ratio": [
-    "1.0"
-  ],
-  "filament_retraction_length": [
-    "0.5"
-  ],
-  "filament_retract_restart_extra": [
-    "0.03"
-  ],
-  "filament_retraction_speed": [
-    "5.0"
-  ],
-  "filament_deretraction_speed": [
-    "5.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "1.0"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "0.75"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "14.4"
-  ]
-}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Very Thin Plastic Syringe @1.00mm.json

@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Very Thin Plastic  Syringe  @1.00mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "ofUu8c6sC0VJb3qu",
-  "filament_id": "OFzTKnYA",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 1.00mm nozzle",
-    "FELIX Food Double 1.00mm nozzle",
-    "FELIX Food Switch 1.00mm nozzle"
-  ],
-  "filament_diameter": [
-    "31.22"
-  ],
-  "filament_flow_ratio": [
-    "1.0"
-  ],
-  "filament_retraction_length": [
-    "0.5"
-  ],
-  "filament_retract_restart_extra": [
-    "0.03"
-  ],
-  "filament_retraction_speed": [
-    "5.0"
-  ],
-  "filament_deretraction_speed": [
-    "5.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "1.0"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "1.5"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "54.0"
-  ]
-}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Very Thin Plastic Syringe @2.00mm.json

@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Very Thin Plastic  Syringe  @2.00mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "sEupyUs2hRB9LJZ1",
-  "filament_id": "OFzTKnYA",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 2.00mm nozzle",
-    "FELIX Food Double 2.00mm nozzle",
-    "FELIX Food Switch 2.00mm nozzle"
-  ],
-  "filament_diameter": [
-    "31.22"
-  ],
-  "filament_flow_ratio": [
-    "1.0"
-  ],
-  "filament_retraction_length": [
-    "0.5"
-  ],
-  "filament_retract_restart_extra": [
-    "0.03"
-  ],
-  "filament_retraction_speed": [
-    "5.0"
-  ],
-  "filament_deretraction_speed": [
-    "5.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "1.0"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "3.0"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "218.0"
-  ]
-}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Very Thin Plastic Syringe @3.00mm.json

@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Very Thin Plastic  Syringe  @3.00mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "GJyH9ISUP8aoNzQp",
-  "filament_id": "OFzTKnYA",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 3.00mm nozzle",
-    "FELIX Food Double 3.00mm nozzle",
-    "FELIX Food Switch 3.00mm nozzle"
-  ],
-  "filament_diameter": [
-    "31.22"
-  ],
-  "filament_flow_ratio": [
-    "1.0"
-  ],
-  "filament_retraction_length": [
-    "0.5"
-  ],
-  "filament_retract_restart_extra": [
-    "0.03"
-  ],
-  "filament_retraction_speed": [
-    "5.0"
-  ],
-  "filament_deretraction_speed": [
-    "5.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "1.0"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "4.5"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "432.0"
-  ]
-}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Very Thin Plastic Syringe @4.00mm.json

@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Very Thin Plastic  Syringe  @4.00mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "dqsklTlJ5R6z47wg",
-  "filament_id": "OFzTKnYA",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 4.00mm nozzle",
-    "FELIX Food Double 4.00mm nozzle",
-    "FELIX Food Switch 4.00mm nozzle"
-  ],
-  "filament_diameter": [
-    "31.22"
-  ],
-  "filament_flow_ratio": [
-    "1.0"
-  ],
-  "filament_retraction_length": [
-    "0.5"
-  ],
-  "filament_retract_restart_extra": [
-    "0.03"
-  ],
-  "filament_retraction_speed": [
-    "5.0"
-  ],
-  "filament_deretraction_speed": [
-    "5.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "1.0"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "6.0"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "864.0"
-  ]
-}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Very Thin Stainless Steel Syringe @0.50mm.json

@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Very Thin Stainless Steel  Syringe  @0.50mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "08AJJWkrbhAo421K",
-  "filament_id": "OFJDz9xO",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 0.50mm nozzle",
-    "FELIX Food Double 0.50mm nozzle",
-    "FELIX Food Switch 0.50mm nozzle"
-  ],
-  "filament_diameter": [
-    "25.4"
-  ],
-  "filament_flow_ratio": [
-    "0.96"
-  ],
-  "filament_retraction_length": [
-    "0.1"
-  ],
-  "filament_retract_restart_extra": [
-    "0.03"
-  ],
-  "filament_retraction_speed": [
-    "5.0"
-  ],
-  "filament_deretraction_speed": [
-    "5.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "0.2"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.03"
-  ],
-  "filament_wipe_distance": [
-    "0.75"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "14.4"
-  ]
-}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Very Thin Stainless Steel Syringe @1.00mm.json

@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Very Thin Stainless Steel  Syringe  @1.00mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "ZGtJ5dq6QEFrRzER",
-  "filament_id": "OFJDz9xO",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 1.00mm nozzle",
-    "FELIX Food Double 1.00mm nozzle",
-    "FELIX Food Switch 1.00mm nozzle"
-  ],
-  "filament_diameter": [
-    "25.4"
-  ],
-  "filament_flow_ratio": [
-    "0.96"
-  ],
-  "filament_retraction_length": [
-    "0.1"
-  ],
-  "filament_retract_restart_extra": [
-    "0.03"
-  ],
-  "filament_retraction_speed": [
-    "5.0"
-  ],
-  "filament_deretraction_speed": [
-    "5.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "0.2"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.03"
-  ],
-  "filament_wipe_distance": [
-    "1.5"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "54.0"
-  ]
-}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Very Thin Stainless Steel Syringe @2.00mm.json

@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Very Thin Stainless Steel  Syringe  @2.00mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "il7EvApOb39ReoAt",
-  "filament_id": "OFJDz9xO",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 2.00mm nozzle",
-    "FELIX Food Double 2.00mm nozzle",
-    "FELIX Food Switch 2.00mm nozzle"
-  ],
-  "filament_diameter": [
-    "25.4"
-  ],
-  "filament_flow_ratio": [
-    "0.96"
-  ],
-  "filament_retraction_length": [
-    "0.1"
-  ],
-  "filament_retract_restart_extra": [
-    "0.03"
-  ],
-  "filament_retraction_speed": [
-    "5.0"
-  ],
-  "filament_deretraction_speed": [
-    "5.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "0.2"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.03"
-  ],
-  "filament_wipe_distance": [
-    "3.0"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "216.0"
-  ]
-}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Very Thin Stainless Steel Syringe @3.00mm.json

@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Very Thin Stainless Steel  Syringe  @3.00mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "yTSl3aV0S2HD6zPy",
-  "filament_id": "OFJDz9xO",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 3.00mm nozzle",
-    "FELIX Food Double 3.00mm nozzle",
-    "FELIX Food Switch 3.00mm nozzle"
-  ],
-  "filament_diameter": [
-    "25.4"
-  ],
-  "filament_flow_ratio": [
-    "0.96"
-  ],
-  "filament_retraction_length": [
-    "0.1"
-  ],
-  "filament_retract_restart_extra": [
-    "0.03"
-  ],
-  "filament_retraction_speed": [
-    "5.0"
-  ],
-  "filament_deretraction_speed": [
-    "5.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "0.2"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.03"
-  ],
-  "filament_wipe_distance": [
-    "4.5"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "432.0"
-  ]
-}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Very Thin Stainless Steel Syringe @4.00mm.json

@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Very Thin Stainless Steel  Syringe  @4.00mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "JfnwH4HjP0CQKuyr",
-  "filament_id": "OFJDz9xO",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 4.00mm nozzle",
-    "FELIX Food Double 4.00mm nozzle",
-    "FELIX Food Switch 4.00mm nozzle"
-  ],
-  "filament_diameter": [
-    "25.4"
-  ],
-  "filament_flow_ratio": [
-    "0.96"
-  ],
-  "filament_retraction_length": [
-    "0.1"
-  ],
-  "filament_retract_restart_extra": [
-    "0.03"
-  ],
-  "filament_retraction_speed": [
-    "5.0"
-  ],
-  "filament_deretraction_speed": [
-    "5.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "0.2"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.03"
-  ],
-  "filament_wipe_distance": [
-    "6.0"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "864.0"
-  ]
-}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FELIX FLEX Brass @ 0.35mm.json

@@ -1,81 +0,0 @@
-{
-  "type": "filament",
-  "name": "FELIX FLEX  Brass @ 0.35mm",
-  "inherits": "fdm_filament_flex",
-  "from": "system",
-  "setting_id": "UXX0sEaoqZvdXwi6",
-  "filament_id": "OFF6vK3j",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Pro 3 0.35mm nozzle",
-    "FELIX Pro L 3.0 0.35mm nozzle",
-    "FELIX Pro XL 3.0 0.35mm nozzle",
-    "FELIX Tec 4 0.35mm nozzle"
-  ],
-  "nozzle_temperature": [
-    "215.0"
-  ],
-  "nozzle_temperature_initial_layer": [
-    "215.0"
-  ],
-  "hot_plate_temp": [
-    "40.0"
-  ],
-  "hot_plate_temp_initial_layer": [
-    "40.0"
-  ],
-  "cool_plate_temp": [
-    "40.0"
-  ],
-  "cool_plate_temp_initial_layer": [
-    "40.0"
-  ],
-  "eng_plate_temp": [
-    "40.0"
-  ],
-  "eng_plate_temp_initial_layer": [
-    "40.0"
-  ],
-  "textured_plate_temp": [
-    "40.0"
-  ],
-  "textured_plate_temp_initial_layer": [
-    "40.0"
-  ],
-  "chamber_temperature": [
-    "28.0"
-  ],
-  "idle_temperature": [
-    "120"
-  ],
-  "filament_retract_length": [
-    "2.2"
-  ],
-  "filament_retract_speed": [
-    "50.0"
-  ],
-  "filament_retraction_speed": [
-    "50.0"
-  ],
-  "filament_retract_restart_extra": [
-    "0.05"
-  ],
-  "filament_flow_ratio": [
-    "1.0"
-  ],
-  "filament_max_volumetric_speed": [
-    "12.0"
-  ],
-  "fan_min_speed": [
-    "60.0"
-  ],
-  "fan_max_speed": [
-    "60.0"
-  ],
-  "filament_density": [
-    "1.38"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ]
-}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FELIX FLEX Brass @ 0.50mm.json

@@ -1,81 +0,0 @@
-{
-  "type": "filament",
-  "name": "FELIX FLEX  Brass @ 0.50mm",
-  "inherits": "fdm_filament_flex",
-  "from": "system",
-  "setting_id": "B4AmHHxdvhsjN34a",
-  "filament_id": "OFF6vK3j",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Pro 3 0.50mm nozzle",
-    "FELIX Pro L 3.0 0.50mm nozzle",
-    "FELIX Pro XL 3.0 0.50mm nozzle",
-    "FELIX Tec 4 0.50mm nozzle"
-  ],
-  "nozzle_temperature": [
-    "215.0"
-  ],
-  "nozzle_temperature_initial_layer": [
-    "215.0"
-  ],
-  "hot_plate_temp": [
-    "40.0"
-  ],
-  "hot_plate_temp_initial_layer": [
-    "40.0"
-  ],
-  "cool_plate_temp": [
-    "40.0"
-  ],
-  "cool_plate_temp_initial_layer": [
-    "40.0"
-  ],
-  "eng_plate_temp": [
-    "40.0"
-  ],
-  "eng_plate_temp_initial_layer": [
-    "40.0"
-  ],
-  "textured_plate_temp": [
-    "40.0"
-  ],
-  "textured_plate_temp_initial_layer": [
-    "40.0"
-  ],
-  "chamber_temperature": [
-    "28.0"
-  ],
-  "idle_temperature": [
-    "120"
-  ],
-  "filament_retract_length": [
-    "2.2"
-  ],
-  "filament_retract_speed": [
-    "50.0"
-  ],
-  "filament_retraction_speed": [
-    "50.0"
-  ],
-  "filament_retract_restart_extra": [
-    "0.05"
-  ],
-  "filament_flow_ratio": [
-    "1.0"
-  ],
-  "filament_max_volumetric_speed": [
-    "12.0"
-  ],
-  "fan_min_speed": [
-    "60.0"
-  ],
-  "fan_max_speed": [
-    "60.0"
-  ],
-  "filament_density": [
-    "1.38"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ]
-}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FELIX FLEX Hardened Steel @ 0.25mm.json

@@ -1,81 +0,0 @@
-{
-  "type": "filament",
-  "name": "FELIX FLEX Hardened Steel @ 0.25mm",
-  "inherits": "fdm_filament_flex",
-  "from": "system",
-  "setting_id": "7z6rkaF5DBbiccZP",
-  "filament_id": "OFSOY4F3",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Pro 3 0.25mm nozzle",
-    "FELIX Pro L 3.0 0.25mm nozzle",
-    "FELIX Pro XL 3.0 0.25mm nozzle",
-    "FELIX Tec 4 0.25mm nozzle"
-  ],
-  "nozzle_temperature": [
-    "225.0"
-  ],
-  "nozzle_temperature_initial_layer": [
-    "225.0"
-  ],
-  "hot_plate_temp": [
-    "40.0"
-  ],
-  "hot_plate_temp_initial_layer": [
-    "40.0"
-  ],
-  "cool_plate_temp": [
-    "40.0"
-  ],
-  "cool_plate_temp_initial_layer": [
-    "40.0"
-  ],
-  "eng_plate_temp": [
-    "40.0"
-  ],
-  "eng_plate_temp_initial_layer": [
-    "40.0"
-  ],
-  "textured_plate_temp": [
-    "40.0"
-  ],
-  "textured_plate_temp_initial_layer": [
-    "40.0"
-  ],
-  "chamber_temperature": [
-    "28.0"
-  ],
-  "idle_temperature": [
-    "120"
-  ],
-  "filament_retract_length": [
-    "2.2"
-  ],
-  "filament_retract_speed": [
-    "50.0"
-  ],
-  "filament_retraction_speed": [
-    "50.0"
-  ],
-  "filament_retract_restart_extra": [
-    "0.05"
-  ],
-  "filament_flow_ratio": [
-    "1.0"
-  ],
-  "filament_max_volumetric_speed": [
-    "12.0"
-  ],
-  "fan_min_speed": [
-    "60.0"
-  ],
-  "fan_max_speed": [
-    "60.0"
-  ],
-  "filament_density": [
-    "1.38"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ]
-}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FELIX FLEX Hardened Steel @ 0.35mm.json

@@ -1,81 +0,0 @@
-{
-  "type": "filament",
-  "name": "FELIX FLEX Hardened Steel @ 0.35mm",
-  "inherits": "fdm_filament_flex",
-  "from": "system",
-  "setting_id": "DJRiMo6Aq0BvhFC9",
-  "filament_id": "OFSOY4F3",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Pro 3 0.35mm nozzle",
-    "FELIX Pro L 3.0 0.35mm nozzle",
-    "FELIX Pro XL 3.0 0.35mm nozzle",
-    "FELIX Tec 4 0.35mm nozzle"
-  ],
-  "nozzle_temperature": [
-    "225.0"
-  ],
-  "nozzle_temperature_initial_layer": [
-    "225.0"
-  ],
-  "hot_plate_temp": [
-    "40.0"
-  ],
-  "hot_plate_temp_initial_layer": [
-    "40.0"
-  ],
-  "cool_plate_temp": [
-    "40.0"
-  ],
-  "cool_plate_temp_initial_layer": [
-    "40.0"
-  ],
-  "eng_plate_temp": [
-    "40.0"
-  ],
-  "eng_plate_temp_initial_layer": [
-    "40.0"
-  ],
-  "textured_plate_temp": [
-    "40.0"
-  ],
-  "textured_plate_temp_initial_layer": [
-    "40.0"
-  ],
-  "chamber_temperature": [
-    "28.0"
-  ],
-  "idle_temperature": [
-    "120"
-  ],
-  "filament_retract_length": [
-    "2.2"
-  ],
-  "filament_retract_speed": [
-    "50.0"
-  ],
-  "filament_retraction_speed": [
-    "50.0"
-  ],
-  "filament_retract_restart_extra": [
-    "0.05"
-  ],
-  "filament_flow_ratio": [
-    "1.0"
-  ],
-  "filament_max_volumetric_speed": [
-    "12.0"
-  ],
-  "fan_min_speed": [
-    "60.0"
-  ],
-  "fan_max_speed": [
-    "60.0"
-  ],
-  "filament_density": [
-    "1.38"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ]
-}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FELIX FLEX Hardened Steel @ 0.50mm.json

@@ -1,81 +0,0 @@
-{
-  "type": "filament",
-  "name": "FELIX FLEX Hardened Steel @ 0.50mm",
-  "inherits": "fdm_filament_flex",
-  "from": "system",
-  "setting_id": "xgFrl1QpyQFFqBYz",
-  "filament_id": "OFSOY4F3",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Pro 3 0.50mm nozzle",
-    "FELIX Pro L 3.0 0.50mm nozzle",
-    "FELIX Pro XL 3.0 0.50mm nozzle",
-    "FELIX Tec 4 0.50mm nozzle"
-  ],
-  "nozzle_temperature": [
-    "225.0"
-  ],
-  "nozzle_temperature_initial_layer": [
-    "225.0"
-  ],
-  "hot_plate_temp": [
-    "40.0"
-  ],
-  "hot_plate_temp_initial_layer": [
-    "40.0"
-  ],
-  "cool_plate_temp": [
-    "40.0"
-  ],
-  "cool_plate_temp_initial_layer": [
-    "40.0"
-  ],
-  "eng_plate_temp": [
-    "40.0"
-  ],
-  "eng_plate_temp_initial_layer": [
-    "40.0"
-  ],
-  "textured_plate_temp": [
-    "40.0"
-  ],
-  "textured_plate_temp_initial_layer": [
-    "40.0"
-  ],
-  "chamber_temperature": [
-    "28.0"
-  ],
-  "idle_temperature": [
-    "120"
-  ],
-  "filament_retract_length": [
-    "2.2"
-  ],
-  "filament_retract_speed": [
-    "50.0"
-  ],
-  "filament_retraction_speed": [
-    "50.0"
-  ],
-  "filament_retract_restart_extra": [
-    "0.05"
-  ],
-  "filament_flow_ratio": [
-    "1.0"
-  ],
-  "filament_max_volumetric_speed": [
-    "12.0"
-  ],
-  "fan_min_speed": [
-    "60.0"
-  ],
-  "fan_max_speed": [
-    "60.0"
-  ],
-  "filament_density": [
-    "1.38"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ]
-}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FELIX FLEX Hardened Steel @ 0.70mm.json

@@ -1,81 +0,0 @@
-{
-  "type": "filament",
-  "name": "FELIX FLEX Hardened Steel @ 0.70mm",
-  "inherits": "fdm_filament_flex",
-  "from": "system",
-  "setting_id": "eZf8u1vzaQbsjyqO",
-  "filament_id": "OFSOY4F3",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Pro 3 0.70mm nozzle",
-    "FELIX Pro L 3.0 0.70mm nozzle",
-    "FELIX Pro XL 3.0 0.70mm nozzle",
-    "FELIX Tec 4 0.70mm nozzle"
-  ],
-  "nozzle_temperature": [
-    "225.0"
-  ],
-  "nozzle_temperature_initial_layer": [
-    "225.0"
-  ],
-  "hot_plate_temp": [
-    "40.0"
-  ],
-  "hot_plate_temp_initial_layer": [
-    "40.0"
-  ],
-  "cool_plate_temp": [
-    "40.0"
-  ],
-  "cool_plate_temp_initial_layer": [
-    "40.0"
-  ],
-  "eng_plate_temp": [
-    "40.0"
-  ],
-  "eng_plate_temp_initial_layer": [
-    "40.0"
-  ],
-  "textured_plate_temp": [
-    "40.0"
-  ],
-  "textured_plate_temp_initial_layer": [
-    "40.0"
-  ],
-  "chamber_temperature": [
-    "28.0"
-  ],
-  "idle_temperature": [
-    "120"
-  ],
-  "filament_retract_length": [
-    "2.2"
-  ],
-  "filament_retract_speed": [
-    "50.0"
-  ],
-  "filament_retraction_speed": [
-    "50.0"
-  ],
-  "filament_retract_restart_extra": [
-    "0.05"
-  ],
-  "filament_flow_ratio": [
-    "1.0"
-  ],
-  "filament_max_volumetric_speed": [
-    "12.0"
-  ],
-  "fan_min_speed": [
-    "60.0"
-  ],
-  "fan_max_speed": [
-    "60.0"
-  ],
-  "filament_density": [
-    "1.38"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ]
-}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FELIX PETG Brass @ 0.35mm.json

@@ -1,81 +0,0 @@
-{
-  "type": "filament",
-  "name": "FELIX PETG Brass @ 0.35mm",
-  "inherits": "fdm_filament_pet",
-  "from": "system",
-  "setting_id": "KZzk6aIxMvt1JlOR",
-  "filament_id": "OF17qLwN",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Pro 3 0.35mm nozzle",
-    "FELIX Pro L 3.0 0.35mm nozzle",
-    "FELIX Pro XL 3.0 0.35mm nozzle",
-    "FELIX Tec 4 0.35mm nozzle"
-  ],
-  "nozzle_temperature": [
-    "220.0"
-  ],
-  "nozzle_temperature_initial_layer": [
-    "220.0"
-  ],
-  "hot_plate_temp": [
-    "75.0"
-  ],
-  "hot_plate_temp_initial_layer": [
-    "75.0"
-  ],
-  "cool_plate_temp": [
-    "75.0"
-  ],
-  "cool_plate_temp_initial_layer": [
-    "75.0"
-  ],
-  "eng_plate_temp": [
-    "75.0"
-  ],
-  "eng_plate_temp_initial_layer": [
-    "75.0"
-  ],
-  "textured_plate_temp": [
-    "75.0"
-  ],
-  "textured_plate_temp_initial_layer": [
-    "75.0"
-  ],
-  "chamber_temperature": [
-    "28.0"
-  ],
-  "idle_temperature": [
-    "120"
-  ],
-  "filament_retract_length": [
-    "1.2"
-  ],
-  "filament_retract_speed": [
-    "60.0"
-  ],
-  "filament_retraction_speed": [
-    "60.0"
-  ],
-  "filament_retract_restart_extra": [
-    "0.05"
-  ],
-  "filament_flow_ratio": [
-    "1.0"
-  ],
-  "filament_max_volumetric_speed": [
-    "12.0"
-  ],
-  "fan_min_speed": [
-    "60.0"
-  ],
-  "fan_max_speed": [
-    "60.0"
-  ],
-  "filament_density": [
-    "1.27"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ]
-}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FELIX PETG Brass @ 0.50mm.json

@@ -1,81 +0,0 @@
-{
-  "type": "filament",
-  "name": "FELIX PETG Brass @ 0.50mm",
-  "inherits": "fdm_filament_pet",
-  "from": "system",
-  "setting_id": "RWPOGeCx1EEYeV8R",
-  "filament_id": "OF17qLwN",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Pro 3 0.50mm nozzle",
-    "FELIX Pro L 3.0 0.50mm nozzle",
-    "FELIX Pro XL 3.0 0.50mm nozzle",
-    "FELIX Tec 4 0.50mm nozzle"
-  ],
-  "nozzle_temperature": [
-    "220.0"
-  ],
-  "nozzle_temperature_initial_layer": [
-    "220.0"
-  ],
-  "hot_plate_temp": [
-    "75.0"
-  ],
-  "hot_plate_temp_initial_layer": [
-    "75.0"
-  ],
-  "cool_plate_temp": [
-    "75.0"
-  ],
-  "cool_plate_temp_initial_layer": [
-    "75.0"
-  ],
-  "eng_plate_temp": [
-    "75.0"
-  ],
-  "eng_plate_temp_initial_layer": [
-    "75.0"
-  ],
-  "textured_plate_temp": [
-    "75.0"
-  ],
-  "textured_plate_temp_initial_layer": [
-    "75.0"
-  ],
-  "chamber_temperature": [
-    "28.0"
-  ],
-  "idle_temperature": [
-    "120"
-  ],
-  "filament_retract_length": [
-    "1.2"
-  ],
-  "filament_retract_speed": [
-    "60.0"
-  ],
-  "filament_retraction_speed": [
-    "60.0"
-  ],
-  "filament_retract_restart_extra": [
-    "0.05"
-  ],
-  "filament_flow_ratio": [
-    "1.0"
-  ],
-  "filament_max_volumetric_speed": [
-    "12.0"
-  ],
-  "fan_min_speed": [
-    "60.0"
-  ],
-  "fan_max_speed": [
-    "60.0"
-  ],
-  "filament_density": [
-    "1.27"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ]
-}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FELIX PETG Hardened Steel @ 0.25mm.json

@@ -1,81 +0,0 @@
-{
-  "type": "filament",
-  "name": "FELIX PETG Hardened Steel @ 0.25mm",
-  "inherits": "fdm_filament_pet",
-  "from": "system",
-  "setting_id": "5RK6gGxFKyADXi4x",
-  "filament_id": "OFQo5ZHk",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Pro 3 0.25mm nozzle",
-    "FELIX Pro L 3.0 0.25mm nozzle",
-    "FELIX Pro XL 3.0 0.25mm nozzle",
-    "FELIX Tec 4 0.25mm nozzle"
-  ],
-  "nozzle_temperature": [
-    "235.0"
-  ],
-  "nozzle_temperature_initial_layer": [
-    "235.0"
-  ],
-  "hot_plate_temp": [
-    "75.0"
-  ],
-  "hot_plate_temp_initial_layer": [
-    "75.0"
-  ],
-  "cool_plate_temp": [
-    "75.0"
-  ],
-  "cool_plate_temp_initial_layer": [
-    "75.0"
-  ],
-  "eng_plate_temp": [
-    "75.0"
-  ],
-  "eng_plate_temp_initial_layer": [
-    "75.0"
-  ],
-  "textured_plate_temp": [
-    "75.0"
-  ],
-  "textured_plate_temp_initial_layer": [
-    "75.0"
-  ],
-  "chamber_temperature": [
-    "28.0"
-  ],
-  "idle_temperature": [
-    "120"
-  ],
-  "filament_retract_length": [
-    "1.2"
-  ],
-  "filament_retract_speed": [
-    "60.0"
-  ],
-  "filament_retraction_speed": [
-    "60.0"
-  ],
-  "filament_retract_restart_extra": [
-    "0.05"
-  ],
-  "filament_flow_ratio": [
-    "1.0"
-  ],
-  "filament_max_volumetric_speed": [
-    "12.0"
-  ],
-  "fan_min_speed": [
-    "60.0"
-  ],
-  "fan_max_speed": [
-    "60.0"
-  ],
-  "filament_density": [
-    "1.27"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ]
-}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FELIX PETG Hardened Steel @ 0.35mm.json

@@ -1,81 +0,0 @@
-{
-  "type": "filament",
-  "name": "FELIX PETG Hardened Steel @ 0.35mm",
-  "inherits": "fdm_filament_pet",
-  "from": "system",
-  "setting_id": "rz08j2cn8mlnvAxh",
-  "filament_id": "OFQo5ZHk",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Pro 3 0.35mm nozzle",
-    "FELIX Pro L 3.0 0.35mm nozzle",
-    "FELIX Pro XL 3.0 0.35mm nozzle",
-    "FELIX Tec 4 0.35mm nozzle"
-  ],
-  "nozzle_temperature": [
-    "235.0"
-  ],
-  "nozzle_temperature_initial_layer": [
-    "235.0"
-  ],
-  "hot_plate_temp": [
-    "75.0"
-  ],
-  "hot_plate_temp_initial_layer": [
-    "75.0"
-  ],
-  "cool_plate_temp": [
-    "75.0"
-  ],
-  "cool_plate_temp_initial_layer": [
-    "75.0"
-  ],
-  "eng_plate_temp": [
-    "75.0"
-  ],
-  "eng_plate_temp_initial_layer": [
-    "75.0"
-  ],
-  "textured_plate_temp": [
-    "75.0"
-  ],
-  "textured_plate_temp_initial_layer": [
-    "75.0"
-  ],
-  "chamber_temperature": [
-    "28.0"
-  ],
-  "idle_temperature": [
-    "120"
-  ],
-  "filament_retract_length": [
-    "1.2"
-  ],
-  "filament_retract_speed": [
-    "60.0"
-  ],
-  "filament_retraction_speed": [
-    "60.0"
-  ],
-  "filament_retract_restart_extra": [
-    "0.05"
-  ],
-  "filament_flow_ratio": [
-    "1.0"
-  ],
-  "filament_max_volumetric_speed": [
-    "12.0"
-  ],
-  "fan_min_speed": [
-    "60.0"
-  ],
-  "fan_max_speed": [
-    "60.0"
-  ],
-  "filament_density": [
-    "1.27"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ]
-}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FELIX PETG Hardened Steel @ 0.50mm.json

@@ -1,81 +0,0 @@
-{
-  "type": "filament",
-  "name": "FELIX PETG Hardened Steel @ 0.50mm",
-  "inherits": "fdm_filament_pet",
-  "from": "system",
-  "setting_id": "1xOwhrqAqJVO48d0",
-  "filament_id": "OFQo5ZHk",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Pro 3 0.50mm nozzle",
-    "FELIX Pro L 3.0 0.50mm nozzle",
-    "FELIX Pro XL 3.0 0.50mm nozzle",
-    "FELIX Tec 4 0.50mm nozzle"
-  ],
-  "nozzle_temperature": [
-    "235.0"
-  ],
-  "nozzle_temperature_initial_layer": [
-    "235.0"
-  ],
-  "hot_plate_temp": [
-    "75.0"
-  ],
-  "hot_plate_temp_initial_layer": [
-    "75.0"
-  ],
-  "cool_plate_temp": [
-    "75.0"
-  ],
-  "cool_plate_temp_initial_layer": [
-    "75.0"
-  ],
-  "eng_plate_temp": [
-    "75.0"
-  ],
-  "eng_plate_temp_initial_layer": [
-    "75.0"
-  ],
-  "textured_plate_temp": [
-    "75.0"
-  ],
-  "textured_plate_temp_initial_layer": [
-    "75.0"
-  ],
-  "chamber_temperature": [
-    "28.0"
-  ],
-  "idle_temperature": [
-    "120"
-  ],
-  "filament_retract_length": [
-    "1.2"
-  ],
-  "filament_retract_speed": [
-    "60.0"
-  ],
-  "filament_retraction_speed": [
-    "60.0"
-  ],
-  "filament_retract_restart_extra": [
-    "0.05"
-  ],
-  "filament_flow_ratio": [
-    "1.0"
-  ],
-  "filament_max_volumetric_speed": [
-    "12.0"
-  ],
-  "fan_min_speed": [
-    "60.0"
-  ],
-  "fan_max_speed": [
-    "60.0"
-  ],
-  "filament_density": [
-    "1.27"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ]
-}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FELIX PETG Hardened Steel @ 0.70mm.json

@@ -1,81 +0,0 @@
-{
-  "type": "filament",
-  "name": "FELIX PETG Hardened Steel @ 0.70mm",
-  "inherits": "fdm_filament_pet",
-  "from": "system",
-  "setting_id": "I2QXz0yDQN6ULNeF",
-  "filament_id": "OFQo5ZHk",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Pro 3 0.70mm nozzle",
-    "FELIX Pro L 3.0 0.70mm nozzle",
-    "FELIX Pro XL 3.0 0.70mm nozzle",
-    "FELIX Tec 4 0.70mm nozzle"
-  ],
-  "nozzle_temperature": [
-    "235.0"
-  ],
-  "nozzle_temperature_initial_layer": [
-    "235.0"
-  ],
-  "hot_plate_temp": [
-    "75.0"
-  ],
-  "hot_plate_temp_initial_layer": [
-    "75.0"
-  ],
-  "cool_plate_temp": [
-    "75.0"
-  ],
-  "cool_plate_temp_initial_layer": [
-    "75.0"
-  ],
-  "eng_plate_temp": [
-    "75.0"
-  ],
-  "eng_plate_temp_initial_layer": [
-    "75.0"
-  ],
-  "textured_plate_temp": [
-    "75.0"
-  ],
-  "textured_plate_temp_initial_layer": [
-    "75.0"
-  ],
-  "chamber_temperature": [
-    "28.0"
-  ],
-  "idle_temperature": [
-    "120"
-  ],
-  "filament_retract_length": [
-    "1.2"
-  ],
-  "filament_retract_speed": [
-    "60.0"
-  ],
-  "filament_retraction_speed": [
-    "60.0"
-  ],
-  "filament_retract_restart_extra": [
-    "0.05"
-  ],
-  "filament_flow_ratio": [
-    "1.0"
-  ],
-  "filament_max_volumetric_speed": [
-    "12.0"
-  ],
-  "fan_min_speed": [
-    "60.0"
-  ],
-  "fan_max_speed": [
-    "60.0"
-  ],
-  "filament_density": [
-    "1.27"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ]
-}