fix: use WEBKIT_DISABLE_DMABUF_RENDERER 1 when using WebKitGTK >= 2.46

2026-10-11 09:51:06 +00:00 · 2026-10-09 03:31:44 +08:00
448 changed files with 974 additions and 26005 deletions
@@ -61,8 +61,10 @@ available; GTK2/WebKit1 is an opt-out configuration the GUI does not support.
 11. A web host that re-themes in place handles `EVT_WEBVIEW_RECREATED` without `Skip()`; one that
    needs a reload lets it through. §[Orca wrapper](#orca-webview-wrapper-widgetswebview)
 12. Keep `WebViewWebKit`'s destructor removing the `"wx"` handler. §[Orca wrapper](#orca-webview-wrapper-widgetswebview)
-13. Do not widen `WEBKIT_DISABLE_COMPOSITING_MODE` beyond Orca's default-path XWayland case, and never
-    make a page's progress depend only on a C++→JS callback. §[WebKitGTK on Linux](#webkitgtk-on-linux-sessions)
+13. Do not widen `WEBKIT_DISABLE_COMPOSITING_MODE` beyond Orca's default-path XWayland case. Disable the
+    WebKit DMA-BUF renderer only for the NVIDIA proprietary driver on native Wayland (GNOME/gtk#8056), and
+    never make a page's progress depend only on a C++→JS callback.
+    §[WebKitGTK on Linux](#webkitgtk-on-linux-sessions)
 14. GL attribute lists: legacy `int[]` lists end with `0` and spell out `WX_GL_RGBA` and
    `WX_GL_DOUBLEBUFFER`; `wxGLAttributes`/`wxGLContextAttrs` end with `EndList()`; MSAA is requested
    explicitly. §[wxGLCanvas](#wxglcanvas-and-wxglcontext)
@@ -599,6 +601,25 @@ Runtime backend detection elsewhere uses Orca's `is_running_on_wayland()` / `is_
  Cite: c12912e0df (`src/OrcaSlicer.cpp`; `resources/web/guide/0/load.js` `OnInit`
  `setTimeout("JumpToTarget()", …)`), 9446030079 (the `GDK_BACKEND=x11` opt-in branch).

+**DMA-BUF renderer / explicit sync (NVIDIA + Wayland).**
+- **Rule:** On the Wayland default path, set `WEBKIT_DISABLE_DMABUF_RENDERER=1` non-replacing, gated to
+  `__linux__` + native Wayland (not the forced-X11 fallback) + `/proc/driver/nvidia/version` +
+  `WebView::WebKitAtLeast(2, 46)`. The version gate uses the runtime `webkit_get_major_version()` /
+  `webkit_get_minor_version()` getters (no GTK init needed), not a compile-time macro, and 2.46 is the
+  oldest release with a confirmed crash report — narrower gates (e.g. 2.54) would miss 2.46–2.52 victims.
+  **Why:** WebKitGTK's DMA-BUF renderer arms `linux-drm-syncobj-v1` on the toplevel surface; GTK3 then
+  commits its first shared-memory frame without an acquire point, and KWin/Mutter reject the commit with
+  `Error 71 (Protocol error)` — GDK turns that into `_exit(1)` before Orca logs anything. The defect is
+  GTK3's `gdk_wayland_window_attach_image()` (GNOME/gtk#8056); WebKit only triggers it, the NVIDIA
+  proprietary driver has no implicit-sync fallback (Mesa tolerates it), and no upstream fix or PR exists.
+  This is a different variable from `WEBKIT_DISABLE_COMPOSITING_MODE` and does not replace it.
+  ```cpp
+  // Wayland default path, before GTK init
+  if (!x11_backend && wayland && ::access("/proc/driver/nvidia/version", F_OK) == 0 &&
+      WebView::WebKitAtLeast(2, 46))
+      ::setenv("WEBKIT_DISABLE_DMABUF_RENDERER", "1", /* replace */ false);
+  ```
+
 ## wxGLCanvas and wxGLContext

 **Attributes.**
@@ -5,6 +5,7 @@ on:
    branches:
     - main
     - release/*
+     - belt-printer
    paths:
     - 'deps/**'
     - 'src/**'
@@ -261,6 +262,9 @@ jobs:
      date:
      ver:
      ver_pure:
+      # Belt-printer nightlies share the main nightly release but carry a `_belt`
+      # suffix so they never overwrite the main assets.
+      nightly_suffix: ${{ github.ref == 'refs/heads/belt-printer' && '_belt' || '' }}
    steps:
    - name: "Remove unneeded stuff to free disk space"
      run:
@@ -435,13 +439,13 @@ jobs:
        name: OrcaSlicer-Linux-flatpak_${{ env.ver }}_${{ matrix.variant.arch }}.flatpak
        path: '/__w/OrcaSlicer/OrcaSlicer/OrcaSlicer-Linux-flatpak_${{ env.ver }}_${{ matrix.variant.arch }}.flatpak'
    - name: Deploy Flatpak to nightly release
-      if: github.repository == 'OrcaSlicer/OrcaSlicer' && github.ref == 'refs/heads/main'
+      if: github.repository == 'OrcaSlicer/OrcaSlicer' && (github.ref == 'refs/heads/main' || github.ref == 'refs/heads/belt-printer')
      uses: WebFreak001/deploy-nightly@v3.2.0
      with:
        upload_url: https://uploads.github.com/repos/OrcaSlicer/OrcaSlicer/releases/137995723/assets{?name,label}
        release_id: 137995723
        asset_path: /__w/OrcaSlicer/OrcaSlicer/OrcaSlicer-Linux-flatpak_${{ env.ver }}_${{ matrix.variant.arch }}.flatpak
-        asset_name: OrcaSlicer-Linux-flatpak_nightly_${{ matrix.variant.arch }}.flatpak
+        asset_name: OrcaSlicer-Linux-flatpak_nightly${{ env.nightly_suffix }}_${{ matrix.variant.arch }}.flatpak
        asset_content_type: application/octet-stream
        max_releases: 1 # optional, if there are more releases than this matching the asset_name, the oldest ones are going to be deleted
    # The asset is /app (the exes link it at runtime) plus the build tree
@@ -33,6 +33,11 @@ jobs:
      ubuntu-ver: '2404'
      ubuntu-ver-str: '_Ubuntu2404'
      ORCA_UPDATER_SIG_KEY: ${{ secrets.ORCA_UPDATER_SIG_KEY }}
+      # Branches whose builds are published to the nightly release. The
+      # belt-printer branch ships alongside main but its assets carry a `_belt`
+      # suffix (nightly_suffix) so they never overwrite the main nightly assets.
+      deploy_nightly: ${{ github.ref == 'refs/heads/main' || github.ref == 'refs/heads/belt-printer' }}
+      nightly_suffix: ${{ github.ref == 'refs/heads/belt-printer' && '_belt' || '' }}

    steps:
      - name: Checkout
@@ -255,7 +260,7 @@ jobs:

 # Thanks to RaySajuuk, it's working now
      - name: Sign app and notary
-        if: github.repository == 'OrcaSlicer/OrcaSlicer' && (github.ref == 'refs/heads/main' || startsWith(github.ref, 'refs/heads/release/')) && runner.os == 'macOS' && inputs.macos-combine-only
+        if: github.repository == 'OrcaSlicer/OrcaSlicer' && (github.ref == 'refs/heads/main' || github.ref == 'refs/heads/belt-printer' || startsWith(github.ref, 'refs/heads/release/')) && runner.os == 'macOS' && inputs.macos-combine-only
        timeout-minutes: 30
        working-directory: ${{ github.workspace }}
        env:
@@ -343,7 +348,7 @@ jobs:
          fi

      - name: Create DMG without notary
-        if: github.ref != 'refs/heads/main' && runner.os == 'macOS' && inputs.macos-combine-only
+        if: github.ref != 'refs/heads/main' && github.ref != 'refs/heads/belt-printer' && runner.os == 'macOS' && inputs.macos-combine-only
        working-directory: ${{ github.workspace }}
        run: |
          # Load the `retry` helper (retries flaky commands such as `hdiutil create`).
@@ -389,13 +394,13 @@ jobs:
          if-no-files-found: ignore

      - name: Deploy Mac release
-        if: github.repository == 'OrcaSlicer/OrcaSlicer' && github.ref == 'refs/heads/main' && runner.os == 'macOS' && inputs.macos-combine-only && !vars.SELF_HOSTED
+        if: github.repository == 'OrcaSlicer/OrcaSlicer' && env.deploy_nightly == 'true' && runner.os == 'macOS' && inputs.macos-combine-only && !vars.SELF_HOSTED
        uses: WebFreak001/deploy-nightly@v3.2.0
        with:
          upload_url: https://uploads.github.com/repos/OrcaSlicer/OrcaSlicer/releases/137995723/assets{?name,label}
          release_id: 137995723
          asset_path: ${{ github.workspace }}/OrcaSlicer_Mac_universal_${{ env.ver }}.dmg
-          asset_name: OrcaSlicer_Mac_universal_nightly.dmg
+          asset_name: OrcaSlicer_Mac_universal_nightly${{ env.nightly_suffix }}.dmg
          asset_content_type: application/octet-stream
          max_releases: 1 # optional, if there are more releases than this matching the asset_name, the oldest ones are going to be deleted

@@ -538,24 +543,24 @@ jobs:
          path: ${{ github.workspace }}/build/src/Release/OrcaSlicer_profile_validator.exe

      - name: Deploy Windows release portable
-        if: github.repository == 'OrcaSlicer/OrcaSlicer' && github.ref == 'refs/heads/main' && runner.os == 'Windows' && !vars.SELF_HOSTED
+        if: github.repository == 'OrcaSlicer/OrcaSlicer' && env.deploy_nightly == 'true' && runner.os == 'Windows' && !vars.SELF_HOSTED
        uses: WebFreak001/deploy-nightly@v3.2.0
        with:
          upload_url: https://uploads.github.com/repos/OrcaSlicer/OrcaSlicer/releases/137995723/assets{?name,label}
          release_id: 137995723
          asset_path: ${{ github.workspace }}/${{ env.BUILD_DIR }}/OrcaSlicer_Windows_${{ env.ver }}${{ env.ARCH_SUFFIX }}_portable.zip
-          asset_name: OrcaSlicer_Windows${{ env.ARCH_SUFFIX }}_nightly_portable.zip
+          asset_name: OrcaSlicer_Windows${{ env.ARCH_SUFFIX }}_nightly${{ env.nightly_suffix }}_portable.zip
          asset_content_type: application/x-zip-compressed
          max_releases: 1

      - name: Deploy Windows release installer
-        if: github.repository == 'OrcaSlicer/OrcaSlicer' && github.ref == 'refs/heads/main' && runner.os == 'Windows' && !vars.SELF_HOSTED
+        if: github.repository == 'OrcaSlicer/OrcaSlicer' && env.deploy_nightly == 'true' && runner.os == 'Windows' && !vars.SELF_HOSTED
        uses: WebFreak001/deploy-nightly@v3.2.0
        with:
          upload_url: https://uploads.github.com/repos/OrcaSlicer/OrcaSlicer/releases/137995723/assets{?name,label}
          release_id: 137995723
          asset_path: ${{ github.workspace }}/${{ env.BUILD_DIR }}/OrcaSlicer_Windows_Installer_${{ env.ver }}${{ env.ARCH_SUFFIX }}.exe
-          asset_name: OrcaSlicer_Windows_Installer${{ env.ARCH_SUFFIX }}_nightly.exe
+          asset_name: OrcaSlicer_Windows_Installer${{ env.ARCH_SUFFIX }}_nightly${{ env.nightly_suffix }}.exe
          asset_content_type: application/x-msdownload
          max_releases: 1

@@ -696,13 +701,13 @@ jobs:
          path: './build/src/dev-utils/Release/generate_system_cache'

      - name: Deploy Ubuntu release
-        if: ${{ github.repository == 'OrcaSlicer/OrcaSlicer' && ! env.ACT && github.ref == 'refs/heads/main' && runner.os == 'Linux' && !vars.SELF_HOSTED }}
+        if: ${{ github.repository == 'OrcaSlicer/OrcaSlicer' && ! env.ACT && env.deploy_nightly == 'true' && runner.os == 'Linux' && !vars.SELF_HOSTED }}
        uses: WebFreak001/deploy-nightly@v3.2.0
        with:
          upload_url: https://uploads.github.com/repos/OrcaSlicer/OrcaSlicer/releases/137995723/assets{?name,label}
          release_id: 137995723
          asset_path: ./build/OrcaSlicer_Linux_AppImage${{ env.ubuntu-ver-str }}${{ env.arch_suffix }}_${{ env.ver }}.AppImage
-          asset_name: OrcaSlicer_Linux_AppImage${{ env.ubuntu-ver-str }}${{ env.arch_suffix }}_nightly.AppImage
+          asset_name: OrcaSlicer_Linux_AppImage${{ env.ubuntu-ver-str }}${{ env.arch_suffix }}_nightly${{ env.nightly_suffix }}.AppImage
          asset_content_type: application/octet-stream
          max_releases: 1 # optional, if there are more releases than this matching the asset_name, the oldest ones are going to be deleted
      - name: Deploy Ubuntu release
@@ -74,26 +74,12 @@ jobs:
          set +e
          ./OrcaSlicer_profile_validator -p ${{ github.workspace }}/resources/profiles -l 2 2>&1 | tee ${{ runner.temp }}/validate_system.log
          exit ${PIPESTATUS[0]}
-      # The validator above is the nightly build of main, so it cannot slice profiles that use
-      # settings a PR adds to the engine: it reports their placeholders as undefined. A PR that
-      # changes src/ also runs Build all, whose Slice check runs this same sweep with the
-      # validator built from the PR, so the sweep below only runs for the other PRs.
-      - name: Detect engine changes
-        id: engine_changes
-        if: ${{ github.event_name == 'pull_request' }}
-        run: |
-          base=${{ github.event.pull_request.base.sha }}
-          if git fetch --no-tags --depth=1 origin "$base" && ! git diff --quiet "$base" HEAD -- src/; then
-            echo "changed=true" >> "$GITHUB_OUTPUT"
-            echo "::notice::This PR changes src/, so Build all's Slice check slices the profiles with the PR-built validator."
-          fi
      # Slice a two-colour cube through every printer, and through every system process/filament whose
      # templates no printer's own slice reaches, so every custom g-code and filename_format shipped is
      # expanded (names in {if} branches not taken included) - catches undefined-placeholder /
      # invalid-flow bugs the static checks above cannot see.
      - name: validate slice (expand custom g-code)
        id: validate_slice
-        if: ${{ steps.engine_changes.outputs.changed != 'true' }}
        continue-on-error: true
        run: |
          set +e
@@ -1084,10 +1084,10 @@ endif ()

 find_path(SPNAV_INCLUDE_DIR spnav.h)
 if (SPNAV_INCLUDE_DIR)
-    find_library(SPNAV_LIB NAMES libspnav.a spnav)
+    find_library(SPNAV_LIB NAMES libspnav.a) # Force linking libspnav statically
    if (SPNAV_LIB)
        add_definitions(-DHAVE_SPNAV)
-        message(STATUS "SPNAV library found: ${SPNAV_LIB}")
+        message(STATUS "SPNAV library found")
    else()
        message(STATUS "SPNAV library NOT found, Spacenavd not supported")
    endif()
@@ -68,8 +68,6 @@ If you come across any of these in search results, please <b>report them</b> as
  Regular updates fueled by continuous community contributions.
 - **Wide Printer Compatibility**  
  Supports a broad range of printers: Bambu Lab, Prusa, Creality, Voron, and more.
- **[Belt Printer Support](https://www.orcaslicer.com/wiki/belt_printing)**  
-  Slice for belt / conveyor (infinite-Z) printers, with belt-aware supports and a tilted-bed preview. Contributed by [Joseph Robertson (@HarrierPigeon)](https://github.com/HarrierPigeon).
 - Additional features can be found in the [change notes](https://github.com/OrcaSlicer/OrcaSlicer/releases/).

 # Wiki
@@ -91,6 +89,17 @@ Visit our GitHub Releases page for the latest stable version of OrcaSlicer, reco
 🌙 **[Download the Latest Nightly Build](https://github.com/OrcaSlicer/OrcaSlicer/releases/tag/nightly-builds)**  
 Explore the latest developments in OrcaSlicer with our nightly builds. Feedback on these versions is highly appreciated.

+### Belt Printer Builds
+
+The [nightly release](https://github.com/OrcaSlicer/OrcaSlicer/releases/tag/nightly-builds) ships **two parallel builds**: the standard build and a belt-printer build. Both are attached to the same release — tell them apart by the filename suffix:
+
+- **Standard** — no suffix (e.g. `OrcaSlicer_Windows_Installer_x64_nightly.exe`)
+- **Belt** — `_belt` suffix (e.g. `OrcaSlicer_Windows_Installer_x64_nightly_belt.exe`)
+
+The `_belt` builds add **experimental support for belt / conveyor (infinite-Z) printers**, where the model is sliced against a tilted belt surface instead of a flat horizontal bed. They include ready-to-use belt printer profiles, the full belt slicing pipeline (mesh rotation and G-code transforms), belt-aware support generation, and a tilted-bed preview.
+
+> ⚠️ Belt printer support is under active development and is **not yet merged into `main`** — it currently ships only in these parallel `_belt` builds, produced from the [`belt-printer`](https://github.com/OrcaSlicer/OrcaSlicer/tree/belt-printer) branch. See tracking PR [#14394](https://github.com/OrcaSlicer/OrcaSlicer/pull/14394) and the original documentation in [#12998](https://github.com/OrcaSlicer/OrcaSlicer/pull/12998).
+
 # How to install

 ## Windows
@@ -104,8 +104,8 @@ fi

 CMAKE_VERSION=$(cmake --version | head -1 | sed 's/[^0-9]*\([0-9]*\).*/\1/')
 if [ "$CMAKE_VERSION" -ge 4 ] 2>/dev/null; then
-  export CMAKE_POLICY_VERSION_MINIMUM=3.10
-  export CMAKE_POLICY_COMPAT="-DCMAKE_POLICY_VERSION_MINIMUM=3.10"
+  export CMAKE_POLICY_VERSION_MINIMUM=3.5
+  export CMAKE_POLICY_COMPAT="-DCMAKE_POLICY_VERSION_MINIMUM=3.5"
  echo "Detected CMake 4.x, adding compatibility flag (env + cmake arg)"
 else
  export CMAKE_POLICY_COMPAT=""
@@ -1,5 +1,5 @@
 if(${CMAKE_VERSION} VERSION_GREATER_EQUAL "4.0")
-    set(CMAKE_POLICY_VERSION_MINIMUM 3.10 CACHE STRING "" FORCE)
+    set(CMAKE_POLICY_VERSION_MINIMUM 3.5 CACHE STRING "" FORCE)
 endif()

 #
@@ -24,7 +24,7 @@ endif()
 # therefore, unfortunately, the installation cannot be copied/moved elsewhere without re-installing wxWidgets.
 #

-cmake_minimum_required(VERSION 3.10)
+cmake_minimum_required(VERSION 3.2)
 if (APPLE)
    # if CMAKE_OSX_DEPLOYMENT_TARGET is not set, set it to 12.0 (the lowest Xcode 27 accepts)
    if (NOT CMAKE_OSX_DEPLOYMENT_TARGET)
@@ -224,7 +224,7 @@ if (NOT IS_CROSS_COMPILE OR NOT APPLE)
        ${_source_dir_arg}
        ${_gen}
        CMAKE_ARGS
-            -DCMAKE_POLICY_VERSION_MINIMUM=3.10
+            -DCMAKE_POLICY_VERSION_MINIMUM=3.5
            -DCMAKE_INSTALL_PREFIX:STRING=${DESTDIR}
            -DCMAKE_MODULE_PATH:STRING=${PROJECT_SOURCE_DIR}/../cmake/modules
            -DCMAKE_PREFIX_PATH:STRING=${DESTDIR}
@@ -279,7 +279,7 @@ else()
        ${_source_dir_arg}
        ${_gen}
        CMAKE_ARGS
-            -DCMAKE_POLICY_VERSION_MINIMUM=3.10
+            -DCMAKE_POLICY_VERSION_MINIMUM=3.5
            -DCMAKE_INSTALL_PREFIX:STRING=${DESTDIR}
            -DCMAKE_PREFIX_PATH:STRING=${DESTDIR}
            -DCMAKE_IGNORE_PREFIX_PATH:STRING=${CMAKE_IGNORE_PREFIX_PATH}
@@ -1,28 +0,0 @@
-diff --git a/src/ModelingAlgorithms/TKMesh/BRepMesh/BRepMesh_ModelPreProcessor.cxx b/src/ModelingAlgorithms/TKMesh/BRepMesh/BRepMesh_ModelPreProcessor.cxx
-index 6f63781..9b1c08e 100644
--- a/src/ModelingAlgorithms/TKMesh/BRepMesh/BRepMesh_ModelPreProcessor.cxx
-+++ b/src/ModelingAlgorithms/TKMesh/BRepMesh/BRepMesh_ModelPreProcessor.cxx
-@@ -210,10 +210,10 @@ private:
- 
-     // Define two pcurves of the seam-edge.
-     occ::handle<Geom2d_Curve> aPC1, aPC2;
-    double                    af, al;
-+    double                    af, al, af1, al1;
- 
-     aE.Orientation(TopAbs_FORWARD);
-    aPC1 = BRep_Tool::CurveOnSurface(aE, aF, af, al);
-+    aPC1 = BRep_Tool::CurveOnSurface(aE, aF, af1, al1);
- 
-     aE.Orientation(TopAbs_REVERSED);
-     aPC2 = BRep_Tool::CurveOnSurface(aE, aF, af, al);
-@@ -224,7 +224,9 @@ private:
-     }
- 
-     // Select the correct pcurve of the seam-edge.
-    const gp_Pnt2d& aFPntOfPC1 = aPC1->Value(aPC1->FirstParameter());
-+    // Use the edge's first parameter. A Geom2d_Line's FirstParameter() is -Precision::Infinite(),
-+    // where a direction of (2e-16, -1) from rounding error gives an X far outside the U range.
-+    const gp_Pnt2d aFPntOfPC1 = aPC1->Value(af1);
- 
-     if (std::abs(aLPntOfIPC1.X() - aFPntOfPC1.X()) > Precision::Confusion())
-     {
@@ -25,16 +25,9 @@ endif()
 # shipped bytes. Windows ships only the DLLs libslic3r links, so the tab adds the TKFillet,
 # TKOffset and TKBool DLLs. See docs/HLSD/design-tab.md.

-if (IN_GIT_REPO)
-    set(OCCT_DIRECTORY_FLAG --directory ${BINARY_DIR_REL}/dep_OCCT-prefix/src/dep_OCCT)
-endif ()
-
 orcaslicer_add_cmake_project(OCCT
    URL https://github.com/Open-Cascade-SAS/OCCT/archive/refs/tags/V8_0_1.zip
    URL_HASH SHA256=7c033d917ee8f040c0512d289dcc5f02c148889d5bac17c3e25639accb44f0da
-    # Makes BRepMesh triangulate cone faces whose seam pcurve is slightly tilted
-    # (Open-Cascade-SAS/OCCT#572); remove the patch once an OCCT release includes the fix.
-    PATCH_COMMAND git apply ${OCCT_DIRECTORY_FLAG} --verbose --ignore-space-change --whitespace=fix ${CMAKE_CURRENT_LIST_DIR}/0001-BRepMesh-seam-pcurve-at-edge-parameter.patch
    #DEPENDS dep_Boost
    DEPENDS ${FREETYPE_PKG}
    CMAKE_ARGS
@@ -88,18 +88,6 @@ struct NfpPConfig {
     */
    bool explore_holes = false;

-    /**
-     * @brief Keep the final pile on the bin.
-     *
-     * The final alignment centres the pile on the alignment target. A target
-     * near an edge (a belt printer starts its parts at the leading end of the
-     * belt) would push part of a pile that is larger than the room around that
-     * point off the bed; with this set the pile stops at the edge instead, and a
-     * pile that does not fit along an axis is centred on it. Off by default, so
-     * the alignment of every other printer is unchanged.
-     */
-    bool clamp_to_bin = false;
-
    /**
     * @brief If true, use all CPUs available. Run on a single core otherwise.
     */
@@ -1123,24 +1111,7 @@ private:
        default: ; // DONT_ALIGN
        }

-        auto d = cb - ci;
-
-        // Keep the pile on the bin (see Config::clamp_to_bin). The items' boxes carry
-        // their inflation, which is the margin left at the edge.
-        if (config_.clamp_to_bin) {
-            auto on_bin = [](Coord lo, Coord hi, Coord bin_lo, Coord bin_hi, Coord shift) {
-                if (hi - lo >= bin_hi - bin_lo)
-                    return (bin_lo + bin_hi) / 2 - (lo + hi) / 2;
-                if (lo + shift < bin_lo)
-                    shift = bin_lo - lo;
-                if (hi + shift > bin_hi)
-                    shift = bin_hi - hi;
-                return shift;
-            };
-            setX(d, on_bin(getX(bb.minCorner()), getX(bb.maxCorner()), getX(bbin.minCorner()), getX(bbin.maxCorner()), getX(d)));
-            setY(d, on_bin(getY(bb.minCorner()), getY(bb.maxCorner()), getY(bbin.minCorner()), getY(bbin.maxCorner()), getY(d)));
-            cb = ci + d;
-        }
+        auto d = cb - ci;       

        // BBS make sure the item won't clash with excluded regions
        // do we have wipe tower after arranging?
@@ -79,13 +79,6 @@ the same `infill_body()`. The octree of the whole object is built only for an
 object of a single body, or when some body received no triangles, which then
 uses it.

-The line spacing of an octree comes from the density, line width and multiline
-count of a region, so a modifier or a part with its own density needs octrees of
-its own. `adaptive_fill_line_spacing()` gives the spacing of each region, and
-`FillAdaptive::RegionOctrees` holds one set of octrees per distinct spacing,
-shared by the regions that have it. A set is built only for the bodies its
-regions fill. The fill takes the set of its region, then the octree of its body.
-
 ## Patterns left out

 Lightning grows its trees over the whole object, so moving a reference point
@@ -1,79 +0,0 @@
-#!/usr/bin/env python3
-"""Belt temperature-tower asset generator (discrete-provini design).
-
-A vertical temperature tower cannot be sliced on a belt printer, so lay a row of
-DISCRETE provini (one per temperature) along the belt (designed Y) with a fixed
-surface gap. Each provino is the chevron+arc unit (belt_temp_provino_unit.stl,
-keel-first); its temperature is ENGRAVED upright into the 50 mm face — a raised
-number would be an unsupported overhang on the belt. The C++ calib_temp belt branch
-(Plater.cpp) injects one M104 per zone 70 layers INTO provino i:
-  print_z[i] = i * PITCH * cos(theta) + 70 * layer_height   (theta = 45)
-inside the body, not in the empty inter-provino gap (which has no sliced layers for
-the event to attach to). PITCH below is the shared geometry contract with that code —
-keep them in sync.
-
-Generates one STL per filament temp range used by Temp_Calibration_Dlg.
-"""
-import numpy as np, trimesh, os
-from matplotlib.textpath import TextPath
-from matplotlib.font_manager import FontProperties
-from shapely.geometry import Polygon as ShPoly
-from shapely.ops import unary_union
-
-HERE = os.path.dirname(os.path.abspath(__file__))
-UNIT = os.path.join(HERE, 'belt_temp_provino_unit.stl')   # single provino, keel-first
-SURF_GAP = 25.0            # surface-to-surface gap between provini (mm) — user spec
-TEXT_H = 9.0
-TEXT_DEPTH = 0.8           # engraving depth (numbers are CUT into the face, not raised:
-                          # a raised number is an unsupported Y-overhang on the belt)
-TEXT_OVERSHOOT = 0.6       # extra height poking out of the face for a clean boolean cut
-
-# Temperature ranges (start, end) per filament family, 5 C step. File name encodes them.
-RANGES = [(230,190),(270,230),(250,230),(280,240),(240,210),(320,280)]
-
-unit = trimesh.load(UNIT)
-dY = unit.bounds[1,1] - unit.bounds[0,1]
-PITCH = dY + SURF_GAP                       # designed-Y pitch == C++ contract constant
-print(f"unit dY={dY:.2f}  PITCH={PITCH:.3f}  (C++ contract: print_z[i]=i*{PITCH:.3f}*cos45)")
-
-# 50 mm face normal (0,-1,1)/sqrt2 ; UPRIGHT basis u=+X det(+1) (verified non-mirrored)
-n = np.array([0,-1,1.])/np.sqrt(2)
-u = np.array([1,0,0.]); v = np.array([0,1,1.])/np.sqrt(2)
-R = np.column_stack([u,v,n])
-fn = unit.face_normals; fc = unit.triangles_center; fa = unit.area_faces
-sel = (fn@n) > 0.9
-face_c = (fc[sel]*fa[sel,None]).sum(0)/fa[sel].sum()
-
-def text_mesh(s):
-    tp = TextPath((0,0), s, size=TEXT_H, prop=FontProperties(family='DejaVu Sans'))
-    rings = [ShPoly(p) for p in tp.to_polygons() if len(p)>=3]
-    rings.sort(key=lambda r:r.area, reverse=True)
-    used=[False]*len(rings); parts=[]
-    for i,o in enumerate(rings):
-        if used[i]: continue
-        holes=[]
-        for j in range(i+1,len(rings)):
-            if not used[j] and o.contains(rings[j]): holes.append(rings[j].exterior.coords); used[j]=True
-        parts.append(ShPoly(o.exterior.coords,holes)); used[i]=True
-    poly = unary_union(parts)
-    geoms = list(poly.geoms) if poly.geom_type=='MultiPolygon' else [poly]
-    m = trimesh.util.concatenate([trimesh.creation.extrude_polygon(g,height=TEXT_DEPTH+TEXT_OVERSHOOT) for g in geoms])
-    c = m.bounds.mean(axis=0); m.apply_translation([-c[0],-c[1],0]); return m
-
-for t_start, t_end in RANGES:
-    temps = list(range(t_start, t_end-1, -5))
-    parts=[]
-    for i,T in enumerate(temps):
-        c = unit.copy(); c.apply_translation([0, i*PITCH, 0])
-        t = text_mesh(str(T)); M=np.eye(4); M[:3,:3]=R; t.apply_transform(M)
-        # place the text spanning from TEXT_DEPTH inside the face to TEXT_OVERSHOOT outside,
-        # then CUT it out of the provino (engrave) — no raised material, no Y-overhang.
-        t.apply_translation(face_c - n*TEXT_DEPTH + np.array([0,i*PITCH,0]))
-        c = trimesh.boolean.difference([c, t], engine='manifold')
-        parts.append(c)
-    asset = trimesh.util.concatenate(parts)
-    out = os.path.join(HERE, f"belt_temp_tower_{t_start}_{t_end}.stl")
-    asset.export(out)
-    dims = np.round(asset.bounds[1]-asset.bounds[0],1)
-    wt = all(p.is_watertight for p in parts)
-    print(f"  {t_start}->{t_end}: {len(temps)} zones  bbox={dims}  watertight={wt}  -> {os.path.basename(out)}")
@@ -1 +1 @@
-<?xml version="1.0" encoding="UTF-8"?><svg id="a" xmlns="http://www.w3.org/2000/svg" viewBox="0 0 15 15"><rect x="7" y="12" width="1" height="1" style="fill:#fefefe;"/><path d="M4.5,5.5c0-1.71,1.43-3.09,3.16-3,1.62.08,2.84,1.54,2.84,3.17h0c0,.61-.25,1.2-.69,1.62l-2.31,2.24v.97" style="fill:none; stroke:#fefefe; stroke-linecap:round; stroke-linejoin:round;"/></svg>
+<svg xmlns="http://www.w3.org/2000/svg" width="25" height="25" viewBox="0 0 25 25"><circle cx="9.5" cy="12.5" r="9.5" style="fill:#009688"/><path d="M6.5,10.5a3,3,0,0,1,6,0c0,3-3,2-3,4v1" style="fill:none;stroke:#e6e6e6;stroke-linecap:round;stroke-linejoin:round"/><rect x="9" y="17" width="1" height="1" style="fill:#e6e6e6"/></svg>
@@ -0,0 +1 @@
+<svg xmlns="http://www.w3.org/2000/svg" width="25" height="25" viewBox="0 0 25 25"><circle cx="9.5" cy="12.5" r="9.5" style="fill:#33aba1"/><path d="M6.5,10.5a3,3,0,0,1,6,0c0,3-3,2-3,4v1" style="fill:none;stroke:#e6e6e6;stroke-linecap:round;stroke-linejoin:round"/><rect x="9" y="17" width="1" height="1" style="fill:#e6e6e6"/></svg>
@@ -1 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?><svg id="a" xmlns="http://www.w3.org/2000/svg" viewBox="0 0 15 15"><path d="M12.31,8l-8.14,4.16c-.31.16-.67-.07-.67-.41V3.27c0-.35.37-.57.68-.41l8.14,4.32c.33.17.33.65,0,.82Z" style="fill:none; stroke:#fefefe; stroke-linecap:round; stroke-linejoin:round;"/></svg>
@@ -1 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?><svg id="a" xmlns="http://www.w3.org/2000/svg" viewBox="0 0 15 15"><path d="M7.5,3.5c2-2,5.1-1,6-1" style="fill:none; stroke:#fefefe; stroke-linecap:round; stroke-linejoin:round;"/><path d="M7.5,12.5c2-2,5.1-1,6-1" style="fill:none; stroke:#fefefe; stroke-linecap:round; stroke-linejoin:round;"/><path d="M7.5,3.5C5.5,1.5,2.4,2.5,1.5,2.5" style="fill:none; stroke:#fefefe; stroke-linecap:round; stroke-linejoin:round;"/><path d="M7.5,12.5c-2-2-5.1-1-6-1" style="fill:none; stroke:#fefefe; stroke-linecap:round; stroke-linejoin:round;"/><line x1="13.5" y1="11.5" x2="13.5" y2="2.5" style="fill:none; stroke:#fefefe; stroke-linecap:round; stroke-linejoin:round;"/><line x1="7.5" y1="12.5" x2="7.5" y2="3.5" style="fill:none; stroke:#fefefe; stroke-linecap:round; stroke-linejoin:round;"/><line x1="1.5" y1="11.5" x2="1.5" y2="2.5" style="fill:none; stroke:#fefefe; stroke-linecap:round; stroke-linejoin:round;"/></svg>
@@ -1,13 +1,9 @@
 {
 	"name": "Custom Printer",
-	"version": "02.04.00.08",
+	"version": "02.04.00.07",
 	"force_update": "0",
 	"description": "My configurations",
 	"machine_model_list": [
-		{
-			"name": "Generic Belt Printer",
-			"sub_path": "machine/MyBeltPrinter.json"
-		},
 		{
 			"name": "Generic Klipper Printer",
 			"sub_path": "machine/MyKlipper.json"
@@ -54,10 +50,6 @@
 			"name": "0.08mm Extra Fine @MyKlipper",
 			"sub_path": "process/0.08mm Extra Fine @MyKlipper.json"
 		},
-		{
-			"name": "0.12mm Fine @MyBeltPrinter",
-			"sub_path": "process/0.12mm Fine @MyBeltPrinter.json"
-		},
 		{
 			"name": "0.12mm Fine @MyKlipper",
 			"sub_path": "process/0.12mm Fine @MyKlipper.json"
@@ -70,10 +62,6 @@
 			"name": "0.16mm Optimal @MyKlipper",
 			"sub_path": "process/0.16mm Optimal @MyKlipper.json"
 		},
-		{
-			"name": "0.20mm Standard @MyBeltPrinter",
-			"sub_path": "process/0.20mm Standard @MyBeltPrinter.json"
-		},
 		{
 			"name": "0.20mm Standard @MyKlipper",
 			"sub_path": "process/0.20mm Standard @MyKlipper.json"
@@ -274,10 +262,6 @@
 			"name": "MyKlipper 0.8 nozzle",
 			"sub_path": "machine/MyKlipper 0.8 nozzle.json"
 		},
-		{
-			"name": "fdm_belt_common",
-			"sub_path": "machine/fdm_belt_common.json"
-		},
 		{
 			"name": "fdm_toolchanger_common",
 			"sub_path": "machine/fdm_toolchanger_common.json"
@@ -290,22 +274,6 @@
 			"name": "MyRRF 0.4 nozzle",
 			"sub_path": "machine/MyRRF 0.4 nozzle.json"
 		},
-		{
-			"name": "MyBeltPrinter 0.2 nozzle",
-			"sub_path": "machine/MyBeltPrinter 0.2 nozzle.json"
-		},
-		{
-			"name": "MyBeltPrinter 0.4 nozzle",
-			"sub_path": "machine/MyBeltPrinter 0.4 nozzle.json"
-		},
-		{
-			"name": "MyBeltPrinter 0.6 nozzle",
-			"sub_path": "machine/MyBeltPrinter 0.6 nozzle.json"
-		},
-		{
-			"name": "MyBeltPrinter 0.8 nozzle",
-			"sub_path": "machine/MyBeltPrinter 0.8 nozzle.json"
-		},
 		{
 			"name": "MyToolChanger 0.2 nozzle",
 			"sub_path": "machine/MyToolChanger 0.2 nozzle.json"
@@ -1,27 +0,0 @@
-{
-	"type": "machine",
-	"name": "MyBeltPrinter 0.2 nozzle",
-	"inherits": "fdm_belt_common",
-	"from": "system",
-	"setting_id": "3w1uyJdmm14QhDnH",
-	"instantiation": "true",
-	"printer_model": "Generic Belt Printer",
-	"default_print_profile": "0.12mm Fine @MyBeltPrinter",
-	"nozzle_diameter": [
-		"0.2"
-	],
-	"max_layer_height": [
-		"0.16"
-	],
-	"min_layer_height": [
-		"0.04"
-	],
-	"printer_variant": "0.2",
-	"printable_area": [
-		"0x0",
-		"350x0",
-		"350x350",
-		"0x350"
-	],
-	"printable_height": "300"
-}
@@ -1,20 +0,0 @@
-{
-	"type": "machine",
-	"name": "MyBeltPrinter 0.4 nozzle",
-	"inherits": "fdm_belt_common",
-	"from": "system",
-	"setting_id": "6nRHUtvJOUffocbu",
-	"instantiation": "true",
-	"printer_model": "Generic Belt Printer",
-	"nozzle_diameter": [
-		"0.4"
-	],
-	"printer_variant": "0.4",
-	"printable_area": [
-		"0x0",
-		"350x0",
-		"350x350",
-		"0x350"
-	],
-	"printable_height": "300"
-}
@@ -1,26 +0,0 @@
-{
-	"type": "machine",
-	"name": "MyBeltPrinter 0.6 nozzle",
-	"inherits": "fdm_belt_common",
-	"from": "system",
-	"setting_id": "K0m9HbUNwKT4UCJV",
-	"instantiation": "true",
-	"printer_model": "Generic Belt Printer",
-	"nozzle_diameter": [
-		"0.6"
-	],
-	"max_layer_height": [
-		"0.4"
-	],
-	"min_layer_height": [
-		"0.12"
-	],
-	"printer_variant": "0.6",
-	"printable_area": [
-		"0x0",
-		"350x0",
-		"350x350",
-		"0x350"
-	],
-	"printable_height": "300"
-}
@@ -1,26 +0,0 @@
-{
-	"type": "machine",
-	"name": "MyBeltPrinter 0.8 nozzle",
-	"inherits": "fdm_belt_common",
-	"from": "system",
-	"setting_id": "rHAweDz4eNwttPNA",
-	"instantiation": "true",
-	"printer_model": "Generic Belt Printer",
-	"nozzle_diameter": [
-		"0.8"
-	],
-	"max_layer_height": [
-		"0.6"
-	],
-	"min_layer_height": [
-		"0.2"
-	],
-	"printer_variant": "0.8",
-	"printable_area": [
-		"0x0",
-		"350x0",
-		"350x350",
-		"0x350"
-	],
-	"printable_height": "300"
-}
@@ -1,12 +0,0 @@
-{
-	"type": "machine_model",
-	"name": "Generic Belt Printer",
-	"model_id": "my_belt_01",
-	"nozzle_diameter": "0.4;0.2;0.6;0.8",
-	"machine_tech": "FFF",
-	"family": "MyPrinter",
-	"bed_model": "Custom_350_bed.stl",
-	"bed_texture": "orcaslicer_bed_texture.svg",
-	"hotend_model": "",
-	"default_materials": "Generic PLA @System;Generic PLA-CF @System;Generic PETG @System;Generic TPU @System;Generic PC @System;Generic PVA @System;Generic PA @System;Generic PA-CF @System"
-}
@@ -1,95 +0,0 @@
-{
-	"type": "machine",
-	"name": "fdm_belt_common",
-	"inherits": "fdm_klipper_common",
-	"from": "system",
-	"instantiation": "false",
-	"gcode_flavor": "klipper",
-	"single_extruder_multi_material": "0",
-	"default_filament_profile": [
-		"Generic PLA @System"
-	],
-	"default_print_profile": "0.20mm Standard @MyBeltPrinter",
-	"max_layer_height": [
-		"0.32"
-	],
-	"min_layer_height": [
-		"0.08"
-	],
-	"deretraction_speed": [
-		"30"
-	],
-	"extruder_colour": [
-		"#FCE94F"
-	],
-	"extruder_offset": [
-		"0x0"
-	],
-	"long_retractions_when_cut": [
-		"0"
-	],
-	"nozzle_diameter": [
-		"0.4"
-	],
-	"retract_before_wipe": [
-		"70%"
-	],
-	"retract_length_toolchange": [
-		"2"
-	],
-	"retract_lift_above": [
-		"0"
-	],
-	"retract_lift_below": [
-		"0"
-	],
-	"retract_lift_enforce": [
-		"All Surfaces"
-	],
-	"retract_restart_extra": [
-		"0"
-	],
-	"retract_restart_extra_toolchange": [
-		"0"
-	],
-	"retract_when_changing_layer": [
-		"1"
-	],
-	"retraction_distances_when_cut": [
-		"18"
-	],
-	"retraction_length": [
-		"0.8"
-	],
-	"retraction_minimum_travel": [
-		"1"
-	],
-	"retraction_speed": [
-		"30"
-	],
-	"travel_slope": [
-		"3"
-	],
-	"wipe": [
-		"1"
-	],
-	"wipe_distance": [
-		"1"
-	],
-	"z_hop": [
-		"0"
-	],
-	"z_hop_types": [
-		"Normal Lift"
-	],
-	"gcode_remap_x": "rev_x",
-	"gcode_remap_y": "pos_z",
-	"gcode_remap_z": "pos_y",
-	"belt_printer": "1",
-	"belt_slice_rotation": "x",
-	"belt_slice_rotation_angle": "45",
-	"build_plate_tilt_x": "45",
-	"purge_in_prime_tower": "0",
-	"scan_first_layer": "0",
-	"auxiliary_fan": "0"
-}
@@ -1,20 +0,0 @@
-{
-	"type": "process",
-	"name": "0.12mm Fine @MyBeltPrinter",
-	"inherits": "fdm_process_klipper_common",
-	"from": "system",
-	"setting_id": "EugqqdLJ423bgEwN",
-	"instantiation": "true",
-	"layer_height": "0.12",
-	"initial_layer_print_height": "0.12",
-	"bottom_shell_layers": "5",
-	"top_shell_layers": "6",
-	"support_top_z_distance": "0.08",
-	"support_bottom_z_distance": "0.08",
-	"skirt_loops": "0",
-	"skirt_distance": "0",
-	"compatible_printers": [
-		"MyBeltPrinter 0.2 nozzle",
-		"MyBeltPrinter 0.4 nozzle"
-	]
-}
@@ -1,17 +0,0 @@
-{
-	"type": "process",
-	"name": "0.20mm Standard @MyBeltPrinter",
-	"inherits": "fdm_process_klipper_common",
-	"from": "system",
-	"setting_id": "YzCDAgH3uLOM53pF",
-	"instantiation": "true",
-	"layer_height": "0.2",
-	"initial_layer_print_height": "0.2",
-	"skirt_loops": "0",
-	"skirt_distance": "0",
-	"compatible_printers": [
-		"MyBeltPrinter 0.4 nozzle",
-		"MyBeltPrinter 0.6 nozzle",
-		"MyBeltPrinter 0.8 nozzle"
-	]
-}
@@ -1,790 +0,0 @@
-{
-	"name": "FELIX Printers",
-	"version": "1.0.0",
-	"force_update": "0",
-	"description": "Configuration file for printers by FELIX Printers",
-	"machine_model_list": [
-		{
-			"name": "FELIX Food Double",
-			"sub_path": "machine/FELIX Food Double.json"
-		},
-		{
-			"name": "FELIX Food Single",
-			"sub_path": "machine/FELIX Food Single.json"
-		},
-		{
-			"name": "FELIX Food Switch",
-			"sub_path": "machine/FELIX Food Switch.json"
-		},
-		{
-			"name": "FELIX Pro 3",
-			"sub_path": "machine/FELIX Pro 3.json"
-		},
-		{
-			"name": "FELIX Pro L 3.0",
-			"sub_path": "machine/FELIX Pro L 3.0.json"
-		},
-		{
-			"name": "FELIX Pro XL 3.0",
-			"sub_path": "machine/FELIX Pro XL 3.0.json"
-		},
-		{
-			"name": "FELIX Tec 4",
-			"sub_path": "machine/FELIX Tec 4.json"
-		}
-	],
-	"machine_list": [
-		{
-			"name": "fdm_all_machines_common",
-			"sub_path": "machine/fdm_all_machines_common.json"
-		},
-		{
-			"name": "fdm_felix_food_common",
-			"sub_path": "machine/fdm_felix_food_common.json"
-		},
-		{
-			"name": "fdm_felix_food_double_common",
-			"sub_path": "machine/fdm_felix_food_double_common.json"
-		},
-		{
-			"name": "fdm_felix_food_switch_common",
-			"sub_path": "machine/fdm_felix_food_switch_common.json"
-		},
-		{
-			"name": "fdm_felix_plastic_common",
-			"sub_path": "machine/fdm_felix_plastic_common.json"
-		},
-		{
-			"name": "fdm_felix_pro_3_common",
-			"sub_path": "machine/fdm_felix_pro_3_common.json"
-		},
-		{
-			"name": "fdm_felix_pro_l_3_common",
-			"sub_path": "machine/fdm_felix_pro_l_3.json"
-		},
-		{
-			"name": "fdm_felix_pro_xl_3_common",
-			"sub_path": "machine/fdm_felix_pro_xl_3_common.json"
-		},
-		{
-			"name": "fdm_felix_tec_common",
-			"sub_path": "machine/fdm_felix_tec_common.json"
-		},
-		{
-			"name": "FELIX Food Single 0.50mm nozzle",
-			"sub_path": "machine/FELIX Food Single 0.50mm nozzle.json"
-		},
-		{
-			"name": "FELIX Food Single 1.00mm nozzle",
-			"sub_path": "machine/FELIX Food Single 1.00mm nozzle.json"
-		},
-		{
-			"name": "FELIX Food Single 2.00mm nozzle",
-			"sub_path": "machine/FELIX Food Single 2.00mm nozzle.json"
-		},
-		{
-			"name": "FELIX Food Single 3.00mm nozzle",
-			"sub_path": "machine/FELIX Food Single 3.00mm nozzle.json"
-		},
-		{
-			"name": "FELIX Food Single 4.00mm nozzle",
-			"sub_path": "machine/FELIX Food Single 4.00mm nozzle.json"
-		},
-		{
-			"name": "FELIX Food Double 0.50mm nozzle",
-			"sub_path": "machine/FELIX Food Double 0.50mm nozzle.json"
-		},
-		{
-			"name": "FELIX Food Double 1.00mm nozzle",
-			"sub_path": "machine/FELIX Food Double 1.00mm nozzle.json"
-		},
-		{
-			"name": "FELIX Food Double 2.00mm nozzle",
-			"sub_path": "machine/FELIX Food Double 2.00mm nozzle.json"
-		},
-		{
-			"name": "FELIX Food Double 3.00mm nozzle",
-			"sub_path": "machine/FELIX Food Double 3.00mm nozzle.json"
-		},
-		{
-			"name": "FELIX Food Double 4.00mm nozzle",
-			"sub_path": "machine/FELIX Food Double 4.00mm nozzle.json"
-		},
-		{
-			"name": "FELIX Food Switch 0.50mm nozzle",
-			"sub_path": "machine/FELIX Food Switch 0.50mm nozzle.json"
-		},
-		{
-			"name": "FELIX Food Switch 1.00mm nozzle",
-			"sub_path": "machine/FELIX Food Switch 1.00mm nozzle.json"
-		},
-		{
-			"name": "FELIX Food Switch 2.00mm nozzle",
-			"sub_path": "machine/FELIX Food Switch 2.00mm nozzle.json"
-		},
-		{
-			"name": "FELIX Food Switch 3.00mm nozzle",
-			"sub_path": "machine/FELIX Food Switch 3.00mm nozzle.json"
-		},
-		{
-			"name": "FELIX Food Switch 4.00mm nozzle",
-			"sub_path": "machine/FELIX Food Switch 4.00mm nozzle.json"
-		},
-		{
-			"name": "FELIX Pro 3 0.25mm nozzle",
-			"sub_path": "machine/FELIX Pro 3 0.25mm nozzle.json"
-		},
-		{
-			"name": "FELIX Pro 3 0.35mm nozzle",
-			"sub_path": "machine/FELIX Pro 3 0.35mm nozzle.json"
-		},
-		{
-			"name": "FELIX Pro 3 0.50mm nozzle",
-			"sub_path": "machine/FELIX Pro 3 0.50mm nozzle.json"
-		},
-		{
-			"name": "FELIX Pro 3 0.70mm nozzle",
-			"sub_path": "machine/FELIX Pro 3 0.70mm nozzle.json"
-		},
-		{
-			"name": "FELIX Pro L 3.0 0.25mm nozzle",
-			"sub_path": "machine/FELIX Pro L 3.0 0.25mm nozzle.json"
-		},
-		{
-			"name": "FELIX Pro L 3.0 0.35mm nozzle",
-			"sub_path": "machine/FELIX Pro L 3.0 0.35mm nozzle.json"
-		},
-		{
-			"name": "FELIX Pro L 3.0 0.50mm nozzle",
-			"sub_path": "machine/FELIX Pro L 3.0 0.50mm nozzle.json"
-		},
-		{
-			"name": "FELIX Pro L 3.0 0.70mm nozzle",
-			"sub_path": "machine/FELIX Pro L 3.0 0.70mm nozzle.json"
-		},
-		{
-			"name": "FELIX Pro XL 3.0 0.25mm nozzle",
-			"sub_path": "machine/FELIX Pro XL 3.0 0.25mm nozzle.json"
-		},
-		{
-			"name": "FELIX Pro XL 3.0 0.35mm nozzle",
-			"sub_path": "machine/FELIX Pro XL 3.0 0.35mm nozzle.json"
-		},
-		{
-			"name": "FELIX Pro XL 3.0 0.50mm nozzle",
-			"sub_path": "machine/FELIX Pro XL 3.0 0.50mm nozzle.json"
-		},
-		{
-			"name": "FELIX Pro XL 3.0 0.70mm nozzle",
-			"sub_path": "machine/FELIX Pro XL 3.0 0.70mm nozzle.json"
-		},
-		{
-			"name": "FELIX Tec 4 0.25mm nozzle",
-			"sub_path": "machine/FELIX Tec 4 0.25mm nozzle.json"
-		},
-		{
-			"name": "FELIX Tec 4 0.35mm nozzle",
-			"sub_path": "machine/FELIX Tec 4 0.35mm nozzle.json"
-		},
-		{
-			"name": "FELIX Tec 4 0.50mm nozzle",
-			"sub_path": "machine/FELIX Tec 4 0.50mm nozzle.json"
-		},
-		{
-			"name": "FELIX Tec 4 0.70mm nozzle",
-			"sub_path": "machine/FELIX Tec 4 0.70mm nozzle.json"
-		}
-	],
-	"process_list": [
-		{
-			"name": "fdm_process_common",
-			"sub_path": "process/fdm_process_common.json"
-		},
-		{
-			"name": "fdm_process_felix_food_common",
-			"sub_path": "process/fdm_process_felix_food_common.json"
-		},
-		{
-			"name": "fdm_process_felix_plastic_common",
-			"sub_path": "process/fdm_process_felix_plastic_common.json"
-		},
-		{
-			"name": "FELIX Food Coarse @ 0.50mm",
-			"sub_path": "process/FELIX Food Coarse @ 0.50mm.json"
-		},
-		{
-			"name": "FELIX Food Coarse @ 1.00mm",
-			"sub_path": "process/FELIX Food Coarse @ 1.00mm.json"
-		},
-		{
-			"name": "FELIX Food Coarse @ 2.00mm",
-			"sub_path": "process/FELIX Food Coarse @ 2.00mm.json"
-		},
-		{
-			"name": "FELIX Food Coarse @ 3.00mm",
-			"sub_path": "process/FELIX Food Coarse @ 3.00mm.json"
-		},
-		{
-			"name": "FELIX Food Coarse @ 4.00mm",
-			"sub_path": "process/FELIX Food Coarse @ 4.00mm.json"
-		},
-		{
-			"name": "FELIX Food Fine @ 0.50mm",
-			"sub_path": "process/FELIX Food Fine @ 0.50mm.json"
-		},
-		{
-			"name": "FELIX Food Fine @ 1.00mm",
-			"sub_path": "process/FELIX Food Fine @ 1.00mm.json"
-		},
-		{
-			"name": "FELIX Food Fine @ 2.00mm",
-			"sub_path": "process/FELIX Food Fine @ 2.00mm.json"
-		},
-		{
-			"name": "FELIX Food Fine @ 3.00mm",
-			"sub_path": "process/FELIX Food Fine @ 3.00mm.json"
-		},
-		{
-			"name": "FELIX Food Fine @ 4.00mm",
-			"sub_path": "process/FELIX Food Fine @ 4.00mm.json"
-		},
-		{
-			"name": "FELIX Food Normal @ 0.50mm",
-			"sub_path": "process/FELIX Food Normal @ 0.50mm.json"
-		},
-		{
-			"name": "FELIX Food Normal @ 1.00mm",
-			"sub_path": "process/FELIX Food Normal @ 1.00mm.json"
-		},
-		{
-			"name": "FELIX Food Normal @ 2.00mm",
-			"sub_path": "process/FELIX Food Normal @ 2.00mm.json"
-		},
-		{
-			"name": "FELIX Food Normal @ 3.00mm",
-			"sub_path": "process/FELIX Food Normal @ 3.00mm.json"
-		},
-		{
-			"name": "FELIX Food Normal @ 4.00mm",
-			"sub_path": "process/FELIX Food Normal @ 4.00mm.json"
-		},
-		{
-			"name": "FELIX Plastic Coarse @ 0.35mm",
-			"sub_path": "process/FELIX Plastic Coarse @ 0.35mm.json"
-		},
-		{
-			"name": "FELIX Plastic Coarse @ 0.50mm",
-			"sub_path": "process/FELIX Plastic Coarse @ 0.50mm.json"
-		},
-		{
-			"name": "FELIX Plastic Coarse @ 0.70mm",
-			"sub_path": "process/FELIX Plastic Coarse @ 0.70mm.json"
-		},
-		{
-			"name": "FELIX Plastic Fine @ 0.25mm",
-			"sub_path": "process/FELIX Plastic Fine @ 0.25mm.json"
-		},
-		{
-			"name": "FELIX Plastic Fine @ 0.35mm",
-			"sub_path": "process/FELIX Plastic Fine @ 0.35mm.json"
-		},
-		{
-			"name": "FELIX Plastic Fine @ 0.50mm",
-			"sub_path": "process/FELIX Plastic Fine @ 0.50mm.json"
-		},
-		{
-			"name": "FELIX Plastic Fine @ 0.70mm",
-			"sub_path": "process/FELIX Plastic Fine @ 0.70mm.json"
-		},
-		{
-			"name": "FELIX Plastic Normal @ 0.25mm",
-			"sub_path": "process/FELIX Plastic Normal @ 0.25mm.json"
-		},
-		{
-			"name": "FELIX Plastic Normal @ 0.35mm",
-			"sub_path": "process/FELIX Plastic Normal @ 0.35mm.json"
-		},
-		{
-			"name": "FELIX Plastic Normal @ 0.50mm",
-			"sub_path": "process/FELIX Plastic Normal @ 0.50mm.json"
-		},
-		{
-			"name": "FELIX Plastic Normal @ 0.70mm",
-			"sub_path": "process/FELIX Plastic Normal @ 0.70mm.json"
-		},
-		{
-			"name": "FELIX Plastic Slightly Coarse @ 0.35mm",
-			"sub_path": "process/FELIX Plastic Slightly Coarse @ 0.35mm.json"
-		},
-		{
-			"name": "FELIX Plastic Slightly Coarse @ 0.50mm",
-			"sub_path": "process/FELIX Plastic Slightly Coarse @ 0.50mm.json"
-		},
-		{
-			"name": "FELIX Plastic Slightly Coarse @ 0.70mm",
-			"sub_path": "process/FELIX Plastic Slightly Coarse @ 0.70mm.json"
-		},
-		{
-			"name": "FELIX Plastic Super Coarse @ 0.70mm",
-			"sub_path": "process/FELIX Plastic Super Coarse @ 0.70mm.json"
-		},
-		{
-			"name": "FELIX Plastic Super Fine @ 0.25mm",
-			"sub_path": "process/FELIX Plastic Super Fine @ 0.25mm.json"
-		},
-		{
-			"name": "FELIX Plastic Super Fine @ 0.35mm",
-			"sub_path": "process/FELIX Plastic Super Fine @ 0.35mm.json"
-		},
-		{
-			"name": "FELIX Plastic Very Coarse @ 0.50mm",
-			"sub_path": "process/FELIX Plastic Very Coarse @ 0.50mm.json"
-		},
-		{
-			"name": "FELIX Plastic Very Coarse @ 0.70mm",
-			"sub_path": "process/FELIX Plastic Very Coarse @ 0.70mm.json"
-		},
-		{
-			"name": "FELIX Plastic Very Fine @ 0.25mm",
-			"sub_path": "process/FELIX Plastic Very Fine @ 0.25mm.json"
-		},
-		{
-			"name": "FELIX Plastic Very Fine @ 0.35mm",
-			"sub_path": "process/FELIX Plastic Very Fine @ 0.35mm.json"
-		},
-		{
-			"name": "FELIX Plastic Very Fine @ 0.50mm",
-			"sub_path": "process/FELIX Plastic Very Fine @ 0.50mm.json"
-		}
-	],
-	"filament_list": [
-		{
-			"name": "fdm_filament_common",
-			"sub_path": "filament/fdm_filament_common.json"
-		},
-		{
-			"name": "fdm_filament_abs",
-			"sub_path": "filament/fdm_filament_abs.json"
-		},
-		{
-			"name": "fdm_filament_asa",
-			"sub_path": "filament/fdm_filament_asa.json"
-		},
-		{
-			"name": "fdm_filament_flex",
-			"sub_path": "filament/fdm_filament_flex.json"
-		},
-		{
-			"name": "fdm_filament_food",
-			"sub_path": "filament/fdm_filament_food.json"
-		},
-		{
-			"name": "fdm_filament_pa",
-			"sub_path": "filament/fdm_filament_pa.json"
-		},
-		{
-			"name": "fdm_filament_pa11cf",
-			"sub_path": "filament/fdm_filament_pa11cf.json"
-		},
-		{
-			"name": "fdm_filament_pc",
-			"sub_path": "filament/fdm_filament_pc.json"
-		},
-		{
-			"name": "fdm_filament_pccf",
-			"sub_path": "filament/fdm_filament_pccf.json"
-		},
-		{
-			"name": "fdm_filament_pet",
-			"sub_path": "filament/fdm_filament_pet.json"
-		},
-		{
-			"name": "fdm_filament_pla",
-			"sub_path": "filament/fdm_filament_pla.json"
-		},
-		{
-			"name": "fdm_filament_pva",
-			"sub_path": "filament/fdm_filament_pva.json"
-		},
-		{
-			"name": "fdm_filament_pvb",
-			"sub_path": "filament/fdm_filament_pvb.json"
-		},
-		{
-			"name": "fdm_filament_tpu",
-			"sub_path": "filament/fdm_filament_tpu.json"
-		},
-		{
-			"name": "FORMFUTURA TitanX ABS Brass @ 0.35mm",
-			"sub_path": "filament/FELIXPlastic/FORMFUTURA TitanX ABS Brass @ 0.35mm.json"
-		},
-		{
-			"name": "FORMFUTURA TitanX ABS Brass @ 0.50mm",
-			"sub_path": "filament/FELIXPlastic/FORMFUTURA TitanX ABS Brass @ 0.50mm.json"
-		},
-		{
-			"name": "FORMFUTURA TitanX ABS Hardened Steel @ 0.25mm",
-			"sub_path": "filament/FELIXPlastic/FORMFUTURA TitanX ABS Hardened Steel @ 0.25mm.json"
-		},
-		{
-			"name": "FORMFUTURA TitanX ABS Hardened Steel @ 0.35mm",
-			"sub_path": "filament/FELIXPlastic/FORMFUTURA TitanX ABS Hardened Steel @ 0.35mm.json"
-		},
-		{
-			"name": "FORMFUTURA TitanX ABS Hardened Steel @ 0.50mm",
-			"sub_path": "filament/FELIXPlastic/FORMFUTURA TitanX ABS Hardened Steel @ 0.50mm.json"
-		},
-		{
-			"name": "FORMFUTURA TitanX ABS Hardened Steel @ 0.70mm",
-			"sub_path": "filament/FELIXPlastic/FORMFUTURA TitanX ABS Hardened Steel @ 0.70mm.json"
-		},
-		{
-			"name": "Ultrafuse ABS Fusion+ Brass @ 0.35mm",
-			"sub_path": "filament/FELIXPlastic/Ultrafuse ABS Fusion+ Brass @ 0.35mm.json"
-		},
-		{
-			"name": "Ultrafuse ABS Fusion+ Brass @ 0.50mm",
-			"sub_path": "filament/FELIXPlastic/Ultrafuse ABS Fusion+ Brass @ 0.50mm.json"
-		},
-		{
-			"name": "Ultrafuse ABS Fusion+ Hardened Steel @ 0.25mm",
-			"sub_path": "filament/FELIXPlastic/Ultrafuse ABS Fusion+ Hardened Steel @ 0.25mm.json"
-		},
-		{
-			"name": "Ultrafuse ABS Fusion+ Hardened Steel @ 0.35mm",
-			"sub_path": "filament/FELIXPlastic/Ultrafuse ABS Fusion+ Hardened Steel @ 0.35mm.json"
-		},
-		{
-			"name": "Ultrafuse ABS Fusion+ Hardened Steel @ 0.50mm",
-			"sub_path": "filament/FELIXPlastic/Ultrafuse ABS Fusion+ Hardened Steel @ 0.50mm.json"
-		},
-		{
-			"name": "Ultrafuse ABS Fusion+ Hardened Steel @ 0.70mm",
-			"sub_path": "filament/FELIXPlastic/Ultrafuse ABS Fusion+ Hardened Steel @ 0.70mm.json"
-		},
-		{
-			"name": "FORMFUTURA AppoloX ASA Brass @ 0.35mm",
-			"sub_path": "filament/FELIXPlastic/FORMFUTURA AppoloX ASA Brass @ 0.35mm.json"
-		},
-		{
-			"name": "FORMFUTURA AppoloX ASA Brass @ 0.50mm",
-			"sub_path": "filament/FELIXPlastic/FORMFUTURA AppoloX ASA Brass @ 0.50mm.json"
-		},
-		{
-			"name": "FORMFUTURA AppoloX ASA Hardened Steel @ 0.25mm",
-			"sub_path": "filament/FELIXPlastic/FORMFUTURA AppoloX ASA Hardened Steel @ 0.25mm.json"
-		},
-		{
-			"name": "FORMFUTURA AppoloX ASA Hardened Steel @ 0.35mm",
-			"sub_path": "filament/FELIXPlastic/FORMFUTURA AppoloX ASA Hardened Steel @ 0.35mm.json"
-		},
-		{
-			"name": "FORMFUTURA AppoloX ASA Hardened Steel @ 0.50mm",
-			"sub_path": "filament/FELIXPlastic/FORMFUTURA AppoloX ASA Hardened Steel @ 0.50mm.json"
-		},
-		{
-			"name": "FORMFUTURA AppoloX ASA Hardened Steel @ 0.70mm",
-			"sub_path": "filament/FELIXPlastic/FORMFUTURA AppoloX ASA Hardened Steel @ 0.70mm.json"
-		},
-		{
-			"name": "FELIX FLEX  Brass @ 0.35mm",
-			"sub_path": "filament/FELIXPlastic/FELIX FLEX  Brass @ 0.35mm.json"
-		},
-		{
-			"name": "FELIX FLEX  Brass @ 0.50mm",
-			"sub_path": "filament/FELIXPlastic/FELIX FLEX  Brass @ 0.50mm.json"
-		},
-		{
-			"name": "FELIX FLEX Hardened Steel @ 0.25mm",
-			"sub_path": "filament/FELIXPlastic/FELIX FLEX Hardened Steel @ 0.25mm.json"
-		},
-		{
-			"name": "FELIX FLEX Hardened Steel @ 0.35mm",
-			"sub_path": "filament/FELIXPlastic/FELIX FLEX Hardened Steel @ 0.35mm.json"
-		},
-		{
-			"name": "FELIX FLEX Hardened Steel @ 0.50mm",
-			"sub_path": "filament/FELIXPlastic/FELIX FLEX Hardened Steel @ 0.50mm.json"
-		},
-		{
-			"name": "FELIX FLEX Hardened Steel @ 0.70mm",
-			"sub_path": "filament/FELIXPlastic/FELIX FLEX Hardened Steel @ 0.70mm.json"
-		},
-		{
-			"name": "Food Medium Plastic  Syringe  @0.50mm",
-			"sub_path": "filament/FELIXFood/Food Medium Plastic  Syringe  @0.50mm.json"
-		},
-		{
-			"name": "Food Medium Plastic  Syringe  @1.00mm",
-			"sub_path": "filament/FELIXFood/Food Medium Plastic  Syringe  @1.00mm.json"
-		},
-		{
-			"name": "Food Medium Plastic  Syringe  @2.00mm",
-			"sub_path": "filament/FELIXFood/Food Medium Plastic  Syringe  @2.00mm.json"
-		},
-		{
-			"name": "Food Medium Plastic  Syringe  @3.00mm",
-			"sub_path": "filament/FELIXFood/Food Medium Plastic  Syringe  @3.00mm.json"
-		},
-		{
-			"name": "Food Medium Plastic  Syringe  @4.00mm",
-			"sub_path": "filament/FELIXFood/Food Medium Plastic  Syringe  @4.00mm.json"
-		},
-		{
-			"name": "Food Medium Stainless Steel  Syringe  @0.50mm",
-			"sub_path": "filament/FELIXFood/Food Medium Stainless Steel  Syringe  @0.50mm.json"
-		},
-		{
-			"name": "Food Medium Stainless Steel  Syringe  @1.00mm",
-			"sub_path": "filament/FELIXFood/Food Medium Stainless Steel  Syringe  @1.00mm.json"
-		},
-		{
-			"name": "Food Medium Stainless Steel  Syringe  @2.00mm",
-			"sub_path": "filament/FELIXFood/Food Medium Stainless Steel  Syringe  @2.00mm.json"
-		},
-		{
-			"name": "Food Medium Stainless Steel  Syringe  @3.00mm",
-			"sub_path": "filament/FELIXFood/Food Medium Stainless Steel  Syringe  @3.00mm.json"
-		},
-		{
-			"name": "Food Medium Stainless Steel  Syringe  @4.00mm",
-			"sub_path": "filament/FELIXFood/Food Medium Stainless Steel  Syringe  @4.00mm.json"
-		},
-		{
-			"name": "Food Thick Stainless Steel  Syringe  @0.50mm",
-			"sub_path": "filament/FELIXFood/Food Thick Stainless Steel  Syringe  @0.50mm.json"
-		},
-		{
-			"name": "Food Thick Stainless Steel  Syringe  @1.00mm",
-			"sub_path": "filament/FELIXFood/Food Thick Stainless Steel  Syringe  @1.00mm.json"
-		},
-		{
-			"name": "Food Thick Stainless Steel  Syringe  @2.00mm",
-			"sub_path": "filament/FELIXFood/Food Thick Stainless Steel  Syringe  @2.00mm.json"
-		},
-		{
-			"name": "Food Thick Stainless Steel  Syringe  @3.00mm",
-			"sub_path": "filament/FELIXFood/Food Thick Stainless Steel  Syringe  @3.00mm.json"
-		},
-		{
-			"name": "Food Thick Stainless Steel  Syringe  @4.00mm",
-			"sub_path": "filament/FELIXFood/Food Thick Stainless Steel  Syringe  @4.00mm.json"
-		},
-		{
-			"name": "Food Thin Plastic  Syringe  @0.50mm",
-			"sub_path": "filament/FELIXFood/Food Thin Plastic  Syringe  @0.50mm.json"
-		},
-		{
-			"name": "Food Thin Plastic  Syringe  @1.00mm",
-			"sub_path": "filament/FELIXFood/Food Thin Plastic  Syringe  @1.00mm.json"
-		},
-		{
-			"name": "Food Thin Plastic  Syringe  @2.00mm",
-			"sub_path": "filament/FELIXFood/Food Thin Plastic  Syringe  @2.00mm.json"
-		},
-		{
-			"name": "Food Thin Plastic  Syringe  @3.00mm",
-			"sub_path": "filament/FELIXFood/Food Thin Plastic  Syringe  @3.00mm.json"
-		},
-		{
-			"name": "Food Thin Plastic  Syringe  @4.00mm",
-			"sub_path": "filament/FELIXFood/Food Thin Plastic  Syringe  @4.00mm.json"
-		},
-		{
-			"name": "Food Thin Stainless Steel  Syringe  @0.50mm",
-			"sub_path": "filament/FELIXFood/Food Thin Stainless Steel  Syringe  @0.50mm.json"
-		},
-		{
-			"name": "Food Thin Stainless Steel  Syringe  @1.00mm",
-			"sub_path": "filament/FELIXFood/Food Thin Stainless Steel  Syringe  @1.00mm.json"
-		},
-		{
-			"name": "Food Thin Stainless Steel  Syringe  @2.00mm",
-			"sub_path": "filament/FELIXFood/Food Thin Stainless Steel  Syringe  @2.00mm.json"
-		},
-		{
-			"name": "Food Thin Stainless Steel  Syringe  @3.00mm",
-			"sub_path": "filament/FELIXFood/Food Thin Stainless Steel  Syringe  @3.00mm.json"
-		},
-		{
-			"name": "Food Thin Stainless Steel  Syringe  @4.00mm",
-			"sub_path": "filament/FELIXFood/Food Thin Stainless Steel  Syringe  @4.00mm.json"
-		},
-		{
-			"name": "Food Very Thick Stainless Steel  Syringe  @1.00mm",
-			"sub_path": "filament/FELIXFood/Food Very Thick Stainless Steel  Syringe  @1.00mm.json"
-		},
-		{
-			"name": "Food Very Thick Stainless Steel  Syringe  @2.00mm",
-			"sub_path": "filament/FELIXFood/Food Very Thick Stainless Steel  Syringe  @2.00mm.json"
-		},
-		{
-			"name": "Food Very Thick Stainless Steel  Syringe  @3.00mm",
-			"sub_path": "filament/FELIXFood/Food Very Thick Stainless Steel  Syringe  @3.00mm.json"
-		},
-		{
-			"name": "Food Very Thick Stainless Steel  Syringe  @4.00mm",
-			"sub_path": "filament/FELIXFood/Food Very Thick Stainless Steel  Syringe  @4.00mm.json"
-		},
-		{
-			"name": "Food Very Thin Plastic  Syringe  @0.50mm",
-			"sub_path": "filament/FELIXFood/Food Very Thin Plastic  Syringe  @0.50mm.json"
-		},
-		{
-			"name": "Food Very Thin Plastic  Syringe  @1.00mm",
-			"sub_path": "filament/FELIXFood/Food Very Thin Plastic  Syringe  @1.00mm.json"
-		},
-		{
-			"name": "Food Very Thin Plastic  Syringe  @2.00mm",
-			"sub_path": "filament/FELIXFood/Food Very Thin Plastic  Syringe  @2.00mm.json"
-		},
-		{
-			"name": "Food Very Thin Plastic  Syringe  @3.00mm",
-			"sub_path": "filament/FELIXFood/Food Very Thin Plastic  Syringe  @3.00mm.json"
-		},
-		{
-			"name": "Food Very Thin Plastic  Syringe  @4.00mm",
-			"sub_path": "filament/FELIXFood/Food Very Thin Plastic  Syringe  @4.00mm.json"
-		},
-		{
-			"name": "Food Very Thin Stainless Steel  Syringe  @0.50mm",
-			"sub_path": "filament/FELIXFood/Food Very Thin Stainless Steel  Syringe  @0.50mm.json"
-		},
-		{
-			"name": "Food Very Thin Stainless Steel  Syringe  @1.00mm",
-			"sub_path": "filament/FELIXFood/Food Very Thin Stainless Steel  Syringe  @1.00mm.json"
-		},
-		{
-			"name": "Food Very Thin Stainless Steel  Syringe  @2.00mm",
-			"sub_path": "filament/FELIXFood/Food Very Thin Stainless Steel  Syringe  @2.00mm.json"
-		},
-		{
-			"name": "Food Very Thin Stainless Steel  Syringe  @3.00mm",
-			"sub_path": "filament/FELIXFood/Food Very Thin Stainless Steel  Syringe  @3.00mm.json"
-		},
-		{
-			"name": "Food Very Thin Stainless Steel  Syringe  @4.00mm",
-			"sub_path": "filament/FELIXFood/Food Very Thin Stainless Steel  Syringe  @4.00mm.json"
-		},
-		{
-			"name": "FELIX PETG Brass @ 0.35mm",
-			"sub_path": "filament/FELIXPlastic/FELIX PETG Brass @ 0.35mm.json"
-		},
-		{
-			"name": "FELIX PETG Brass @ 0.50mm",
-			"sub_path": "filament/FELIXPlastic/FELIX PETG Brass @ 0.50mm.json"
-		},
-		{
-			"name": "FELIX PETG Hardened Steel @ 0.25mm",
-			"sub_path": "filament/FELIXPlastic/FELIX PETG Hardened Steel @ 0.25mm.json"
-		},
-		{
-			"name": "FELIX PETG Hardened Steel @ 0.35mm",
-			"sub_path": "filament/FELIXPlastic/FELIX PETG Hardened Steel @ 0.35mm.json"
-		},
-		{
-			"name": "FELIX PETG Hardened Steel @ 0.50mm",
-			"sub_path": "filament/FELIXPlastic/FELIX PETG Hardened Steel @ 0.50mm.json"
-		},
-		{
-			"name": "FELIX PETG Hardened Steel @ 0.70mm",
-			"sub_path": "filament/FELIXPlastic/FELIX PETG Hardened Steel @ 0.70mm.json"
-		},
-		{
-			"name": "FELIX Premium PLA Brass @ 0.35mm",
-			"sub_path": "filament/FELIXPlastic/FELIX Premium PLA Brass @ 0.35mm.json"
-		},
-		{
-			"name": "FELIX Premium PLA Brass @ 0.50mm",
-			"sub_path": "filament/FELIXPlastic/FELIX Premium PLA Brass @ 0.50mm.json"
-		},
-		{
-			"name": "FELIX Premium PLA Hardened Steel @ 0.25mm",
-			"sub_path": "filament/FELIXPlastic/FELIX Premium PLA Hardened Steel @ 0.25mm.json"
-		},
-		{
-			"name": "FELIX Premium PLA Hardened Steel @ 0.35mm",
-			"sub_path": "filament/FELIXPlastic/FELIX Premium PLA Hardened Steel @ 0.35mm.json"
-		},
-		{
-			"name": "FELIX Premium PLA Hardened Steel @ 0.50mm",
-			"sub_path": "filament/FELIXPlastic/FELIX Premium PLA Hardened Steel @ 0.50mm.json"
-		},
-		{
-			"name": "FELIX Premium PLA Hardened Steel @ 0.70mm",
-			"sub_path": "filament/FELIXPlastic/FELIX Premium PLA Hardened Steel @ 0.70mm.json"
-		},
-		{
-			"name": "FELIX Wood  Brass @ 0.35mm",
-			"sub_path": "filament/FELIXPlastic/FELIX Wood  Brass @ 0.35mm.json"
-		},
-		{
-			"name": "FELIX Wood Brass @ 0.50mm",
-			"sub_path": "filament/FELIXPlastic/FELIX Wood Brass @ 0.50mm.json"
-		},
-		{
-			"name": "FELIX Wood Hardened Steel @ 0.25mm",
-			"sub_path": "filament/FELIXPlastic/FELIX Wood Hardened Steel @ 0.25mm.json"
-		},
-		{
-			"name": "FELIX Wood Hardened Steel @ 0.35mm",
-			"sub_path": "filament/FELIXPlastic/FELIX Wood Hardened Steel @ 0.35mm.json"
-		},
-		{
-			"name": "FELIX Wood Hardened Steel @ 0.50mm",
-			"sub_path": "filament/FELIXPlastic/FELIX Wood Hardened Steel @ 0.50mm.json"
-		},
-		{
-			"name": "FELIX Wood Hardened Steel @ 0.70mm",
-			"sub_path": "filament/FELIXPlastic/FELIX Wood Hardened Steel @ 0.70mm.json"
-		},
-		{
-			"name": "FORMFUTURA ePLA Brass @ 0.35mm",
-			"sub_path": "filament/FELIXPlastic/FORMFUTURA ePLA Brass @ 0.35mm.json"
-		},
-		{
-			"name": "FORMFUTURA ePLA Brass @ 0.50mm",
-			"sub_path": "filament/FELIXPlastic/FORMFUTURA ePLA Brass @ 0.50mm.json"
-		},
-		{
-			"name": "FORMFUTURA ePLA Hardened Steel @ 0.25mm",
-			"sub_path": "filament/FELIXPlastic/FORMFUTURA ePLA Hardened Steel @ 0.25mm.json"
-		},
-		{
-			"name": "FORMFUTURA ePLA Hardened Steel @ 0.35mm",
-			"sub_path": "filament/FELIXPlastic/FORMFUTURA ePLA Hardened Steel @ 0.35mm.json"
-		},
-		{
-			"name": "FORMFUTURA ePLA Hardened Steel @ 0.50mm",
-			"sub_path": "filament/FELIXPlastic/FORMFUTURA ePLA Hardened Steel @ 0.50mm.json"
-		},
-		{
-			"name": "FORMFUTURA ePLA Hardened Steel @ 0.70mm",
-			"sub_path": "filament/FELIXPlastic/FORMFUTURA ePLA Hardened Steel @ 0.70mm.json"
-		},
-		{
-			"name": "FORMFUTURA Aquasolve PVA Brass @ 0.35mm",
-			"sub_path": "filament/FELIXPlastic/FORMFUTURA Aquasolve PVA Brass @ 0.35mm.json"
-		},
-		{
-			"name": "FORMFUTURA Aquasolve PVA Brass @ 0.50mm",
-			"sub_path": "filament/FELIXPlastic/FORMFUTURA Aquasolve PVA Brass @ 0.50mm.json"
-		},
-		{
-			"name": "FORMFUTURA Aquasolve PVA Hardened Steel @ 0.25mm",
-			"sub_path": "filament/FELIXPlastic/FORMFUTURA Aquasolve PVA Hardened Steel @ 0.25mm.json"
-		},
-		{
-			"name": "FORMFUTURA Aquasolve PVA Hardened Steel @ 0.35mm",
-			"sub_path": "filament/FELIXPlastic/FORMFUTURA Aquasolve PVA Hardened Steel @ 0.35mm.json"
-		},
-		{
-			"name": "FORMFUTURA Aquasolve PVA Hardened Steel @ 0.50mm",
-			"sub_path": "filament/FELIXPlastic/FORMFUTURA Aquasolve PVA Hardened Steel @ 0.50mm.json"
-		},
-		{
-			"name": "FORMFUTURA Aquasolve PVA Hardened Steel @ 0.70mm",
-			"sub_path": "filament/FELIXPlastic/FORMFUTURA Aquasolve PVA Hardened Steel @ 0.70mm.json"
-		}
-	]
-}
@@ -1,28 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<svg id="a" xmlns="http://www.w3.org/2000/svg" width="180.62mm" height="180.62mm" viewBox="0 0 512 512" xmlns:c2pa="http://c2pa.org/manifest">
-  <rect x="0" y="0" width="512" height="512" fill="none"/>
-  <g fill="#ffffff" transform="translate(5,460) scale(0.2)">
-    <g>
-      <path d="M139.4.8l-.2,62c-34.3,0-63.4,21.8-73.2,51.9C26.4,141,.2,187.8.2,241.3H0l.2-101.3C.2,63.1,62.4.8,139.4.8Z"/>
-      <path d="M139.1,92.5l-.8,62.5c-42.6,0-77.1,38.6-77.1,86.3l1-103.9c0-7.9,1.3-15.5,3.6-22.7,21.2-14.1,46.3-22.3,73.2-22.3Z"/>
-      <path d="M65.9,114.7c-2.3,7.2-3.6,14.8-3.6,22.7l-1,103.9H.2c0-53.5,26.3-100.3,65.7-126.6Z"/>
-    </g>
-    <polygon points="202.8 .4 202.8 92.9 226.2 92.9 226.2 56 259.8 56 259.8 36.1 226.2 36.1 226.2 19.4 265.7 19.4 265.7 0 202.8 .4"/>
-    <polygon points="282.3 -.3 282.3 93 346.1 93 346.1 72.4 306.8 72.4 306.8 55.6 341.7 55.6 341.7 36.4 306.5 36.4 306.5 19.6 346.2 19.6 346.2 -.3 282.3 -.3"/>
-    <polygon points="365.9 92.8 429.5 92.8 429.5 70.9 389.6 70.9 389.6 .2 365 .2 365.9 92.8"/>
-    <polygon points="448 0 471.9 0 471.9 92.5 447.5 92.5 448 0"/>
-    <path d="M485.1,92.5s34.7-44.3,33.4-46.5S485.7,0,485.7,0h29l18.4,24.8L550.1,0h26.6l-29.9,45.4,33.1,46.8h-28.8l-19.3-27.4-18.9,28.1-27.9-.4Z"/>
-    <g>
-      <path d="M210.9,154.1c-1.9,0-3.7-.2-5.3-.7-1.6-.4-3-1-4.2-1.6v-3.9c1.1.6,2.4,1.1,3.9,1.6,1.5.5,3.2.7,5.1.7,3.1,0,5.5-.6,7.2-1.7,1.7-1.2,2.5-2.8,2.5-5s-.8-3.9-2.5-5c-1.7-1.2-4.2-1.7-7.4-1.7h-3.9v-3.7h4c2.6,0,4.5-.5,5.9-1.5,1.4-1,2-2.4,2-4.2s-.3-2.3-1-3.1c-.6-.8-1.6-1.5-2.8-1.9-1.3-.4-2.8-.7-4.6-.7s-3,.2-4.3.6c-1.3.4-2.4.8-3.3,1.3v-3.9c1.1-.5,2.3-.9,3.6-1.3,1.3-.4,2.8-.5,4.5-.5s4,.3,5.5.8c1.5.5,2.7,1.3,3.6,2.2.9.9,1.6,1.9,2,3.1.4,1.1.6,2.3.6,3.4s-.2,2.4-.7,3.3c-.5.9-1,1.7-1.6,2.2-.6.6-1.4,1.1-2.3,1.6,1.3.7,2.3,1.4,3.2,2.1s1.6,1.7,2.2,2.8c.6,1.1,1,2.5,1,4.2s-.2,2.5-.7,3.8c-.5,1.2-1.2,2.4-2.2,3.4s-2.4,1.8-4,2.4c-1.7.6-3.7.9-6.1.9Z"/>
-      <path d="M232.1,153.7v-35.4h11.1c5.5,0,9.7,1.5,12.4,4.4,2.8,3,4.2,7.4,4.2,13.2s-1.4,10.3-4.2,13.2c-2.8,3-6.9,4.5-12.4,4.5h-11.1ZM235.9,150h7c4.5,0,7.8-1.1,9.9-3.4,2-2.3,3.1-5.8,3.1-10.7s-1-8.4-3.1-10.7c-2-2.3-5.3-3.4-9.9-3.4h-7v28.2Z"/>
-      <path d="M291.9,154.4c-.8,0-1.7-.1-2.6-.3-1-.2-1.9-.5-2.8-.8-.9-.3-1.7-.7-2.4-1l1.3-1.3v14.2h-3.8v-33.2c0-1.1.3-2,1-2.7.7-.7,1.6-1.2,2.7-1.6,1.1-.4,2.3-.6,3.5-.8,1.2-.2,2.4-.2,3.5-.2,2.1,0,4.1.4,6,1.3,1.9.9,3.4,2.4,4.6,4.5s1.7,5,1.7,8.6-.5,5.1-1.5,7.1c-1,2-2.4,3.5-4.3,4.6-1.9,1.1-4.2,1.6-6.9,1.6ZM291.9,150.9c1.9,0,3.5-.4,4.8-1.2,1.3-.8,2.2-2,2.8-3.5.6-1.5,1-3.2,1-5.1s-.2-3.7-.6-5.4c-.4-1.7-1.2-3-2.4-4-1.2-1-3-1.5-5.2-1.5s-3.4.2-4.8.6c-1.4.4-2,1-2,1.8v16.4c1.1.6,2.2,1.1,3.3,1.4s2.2.5,3.3.5Z"/>
-      <path d="M311.1,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1c-.8,0-1.6.2-2.4.3-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
-      <path d="M330.5,122.5v-4.2h4.2v4.2h-4.2ZM330.8,153.7v-26.4h3.8v26.4h-3.8Z"/>
-      <path d="M342.7,129.3c.8-.4,1.7-.8,2.6-1.1.9-.3,1.8-.6,2.8-.8.9-.2,1.9-.4,2.9-.5,1-.1,2-.2,2.9-.2,2.6,0,4.6.4,6.1,1.1,1.5.8,2.6,1.9,3.3,3.3.7,1.4,1,3.2,1,5.2v17.2h-3.8v-17.2c0-.6,0-1.3-.2-2-.2-.7-.5-1.4-.9-2-.5-.7-1.2-1.2-2.1-1.6s-2.2-.6-3.8-.6-2.2,0-3.4.3-2.4.4-3.6.8v22.4h-3.8v-24.3Z"/>
-      <path d="M380.7,154.1c-1.9,0-3.4-.6-4.7-1.7-1.3-1.1-1.9-2.9-1.9-5.1v-16.5h-4.6v-3.5h4.6v-7.5h3.8v7.5h6.8v3.5h-6.8v15.3c0,1.5.2,2.6.7,3.3s1.4,1.1,2.8,1.1,1.3,0,1.9-.2,1.1-.3,1.5-.5v3.6c-.5.2-1.1.3-1.9.5s-1.5.2-2.1.2Z"/>
-      <path d="M402,154.4c-2.5,0-4.7-.5-6.5-1.6-1.8-1-3.3-2.6-4.2-4.7-1-2.1-1.5-4.7-1.5-7.8,0-4.6,1-8,3.1-10.3,2.1-2.3,4.9-3.4,8.5-3.4s5.1.6,6.8,1.9c1.7,1.3,2.9,3,3.7,5.1.7,2.2,1.1,4.6,1.1,7.3h-21.3l.3-3.5h18.5l-1.5.5c-.1-2.6-.8-4.6-2-5.9-1.2-1.3-3.1-2-5.6-2s-3.2.3-4.3,1c-1.1.6-2,1.7-2.6,3.3s-.8,3.8-.8,6.6.8,5.7,2.3,7.3c1.5,1.7,3.6,2.5,6.3,2.5s2.5,0,3.6-.3,2.1-.5,3-.8c.9-.4,1.7-.7,2.4-1.2v3.9c-1.3.6-2.7,1.1-4.2,1.4-1.5.3-3.2.5-5.1.5Z"/>
-      <path d="M419.5,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1-1.6.2-2.4.3c-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
-      <path d="M446.4,154.4c-1.9,0-3.5-.2-4.8-.6s-2.6-.9-4-1.6v-4c1.1.6,2.1,1.1,2.9,1.5s1.7.7,2.6.9c.9.2,1.9.3,3,.3,1.8,0,3.2-.4,4.3-1.2,1.1-.8,1.7-1.8,1.7-3s-.3-1.7-.8-2.3-1.2-1-2.1-1.3c-.8-.4-1.7-.7-2.7-1.1-1-.3-2.1-.6-3.1-.9-1-.3-2-.8-2.9-1.3-.9-.5-1.6-1.3-2.1-2.1-.5-.9-.8-2-.8-3.4s.3-2.5.8-3.4c.5-1,1.3-1.7,2.1-2.4.9-.6,1.9-1.1,3-1.4,1.1-.3,2.2-.4,3.3-.4,1.6,0,2.9.2,4.1.6,1.1.4,2.3.9,3.5,1.4v3.8c-1.3-.7-2.5-1.3-3.6-1.7-1.1-.4-2.3-.7-3.8-.7s-2.7.3-3.9.9c-1.1.6-1.7,1.5-1.7,2.7s.3,1.8.9,2.4,1.4,1,2.3,1.4c1,.3,2,.7,3.1,1,.9.3,1.8.6,2.8.9,1,.3,1.8.8,2.7,1.3.8.5,1.5,1.3,2,2.1.5.9.8,2,.8,3.4s-.5,3.4-1.4,4.6-2.2,2.1-3.6,2.7c-1.5.6-3,.8-4.5.8Z"/>
-    </g>
-  </g>
-</svg>
@@ -1,28 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<svg id="a" xmlns="http://www.w3.org/2000/svg" width="180.62mm" height="180.62mm" viewBox="0 0 250 195" xmlns:c2pa="http://c2pa.org/manifest">
-  <rect x="0" y="0" width="250" height="195" fill="none"/>
-  <g fill="#ffffff" transform="translate(2,169) scale(0.1)">
-    <g>
-      <path d="M139.4.8l-.2,62c-34.3,0-63.4,21.8-73.2,51.9C26.4,141,.2,187.8.2,241.3H0l.2-101.3C.2,63.1,62.4.8,139.4.8Z"/>
-      <path d="M139.1,92.5l-.8,62.5c-42.6,0-77.1,38.6-77.1,86.3l1-103.9c0-7.9,1.3-15.5,3.6-22.7,21.2-14.1,46.3-22.3,73.2-22.3Z"/>
-      <path d="M65.9,114.7c-2.3,7.2-3.6,14.8-3.6,22.7l-1,103.9H.2c0-53.5,26.3-100.3,65.7-126.6Z"/>
-    </g>
-    <polygon points="202.8 .4 202.8 92.9 226.2 92.9 226.2 56 259.8 56 259.8 36.1 226.2 36.1 226.2 19.4 265.7 19.4 265.7 0 202.8 .4"/>
-    <polygon points="282.3 -.3 282.3 93 346.1 93 346.1 72.4 306.8 72.4 306.8 55.6 341.7 55.6 341.7 36.4 306.5 36.4 306.5 19.6 346.2 19.6 346.2 -.3 282.3 -.3"/>
-    <polygon points="365.9 92.8 429.5 92.8 429.5 70.9 389.6 70.9 389.6 .2 365 .2 365.9 92.8"/>
-    <polygon points="448 0 471.9 0 471.9 92.5 447.5 92.5 448 0"/>
-    <path d="M485.1,92.5s34.7-44.3,33.4-46.5S485.7,0,485.7,0h29l18.4,24.8L550.1,0h26.6l-29.9,45.4,33.1,46.8h-28.8l-19.3-27.4-18.9,28.1-27.9-.4Z"/>
-    <g>
-      <path d="M210.9,154.1c-1.9,0-3.7-.2-5.3-.7-1.6-.4-3-1-4.2-1.6v-3.9c1.1.6,2.4,1.1,3.9,1.6,1.5.5,3.2.7,5.1.7,3.1,0,5.5-.6,7.2-1.7,1.7-1.2,2.5-2.8,2.5-5s-.8-3.9-2.5-5c-1.7-1.2-4.2-1.7-7.4-1.7h-3.9v-3.7h4c2.6,0,4.5-.5,5.9-1.5,1.4-1,2-2.4,2-4.2s-.3-2.3-1-3.1c-.6-.8-1.6-1.5-2.8-1.9-1.3-.4-2.8-.7-4.6-.7s-3,.2-4.3.6c-1.3.4-2.4.8-3.3,1.3v-3.9c1.1-.5,2.3-.9,3.6-1.3,1.3-.4,2.8-.5,4.5-.5s4,.3,5.5.8c1.5.5,2.7,1.3,3.6,2.2.9.9,1.6,1.9,2,3.1.4,1.1.6,2.3.6,3.4s-.2,2.4-.7,3.3c-.5.9-1,1.7-1.6,2.2-.6.6-1.4,1.1-2.3,1.6,1.3.7,2.3,1.4,3.2,2.1s1.6,1.7,2.2,2.8c.6,1.1,1,2.5,1,4.2s-.2,2.5-.7,3.8c-.5,1.2-1.2,2.4-2.2,3.4s-2.4,1.8-4,2.4c-1.7.6-3.7.9-6.1.9Z"/>
-      <path d="M232.1,153.7v-35.4h11.1c5.5,0,9.7,1.5,12.4,4.4,2.8,3,4.2,7.4,4.2,13.2s-1.4,10.3-4.2,13.2c-2.8,3-6.9,4.5-12.4,4.5h-11.1ZM235.9,150h7c4.5,0,7.8-1.1,9.9-3.4,2-2.3,3.1-5.8,3.1-10.7s-1-8.4-3.1-10.7c-2-2.3-5.3-3.4-9.9-3.4h-7v28.2Z"/>
-      <path d="M291.9,154.4c-.8,0-1.7-.1-2.6-.3-1-.2-1.9-.5-2.8-.8-.9-.3-1.7-.7-2.4-1l1.3-1.3v14.2h-3.8v-33.2c0-1.1.3-2,1-2.7.7-.7,1.6-1.2,2.7-1.6,1.1-.4,2.3-.6,3.5-.8,1.2-.2,2.4-.2,3.5-.2,2.1,0,4.1.4,6,1.3,1.9.9,3.4,2.4,4.6,4.5s1.7,5,1.7,8.6-.5,5.1-1.5,7.1c-1,2-2.4,3.5-4.3,4.6-1.9,1.1-4.2,1.6-6.9,1.6ZM291.9,150.9c1.9,0,3.5-.4,4.8-1.2,1.3-.8,2.2-2,2.8-3.5.6-1.5,1-3.2,1-5.1s-.2-3.7-.6-5.4c-.4-1.7-1.2-3-2.4-4-1.2-1-3-1.5-5.2-1.5s-3.4.2-4.8.6c-1.4.4-2,1-2,1.8v16.4c1.1.6,2.2,1.1,3.3,1.4s2.2.5,3.3.5Z"/>
-      <path d="M311.1,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1c-.8,0-1.6.2-2.4.3-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
-      <path d="M330.5,122.5v-4.2h4.2v4.2h-4.2ZM330.8,153.7v-26.4h3.8v26.4h-3.8Z"/>
-      <path d="M342.7,129.3c.8-.4,1.7-.8,2.6-1.1.9-.3,1.8-.6,2.8-.8.9-.2,1.9-.4,2.9-.5,1-.1,2-.2,2.9-.2,2.6,0,4.6.4,6.1,1.1,1.5.8,2.6,1.9,3.3,3.3.7,1.4,1,3.2,1,5.2v17.2h-3.8v-17.2c0-.6,0-1.3-.2-2-.2-.7-.5-1.4-.9-2-.5-.7-1.2-1.2-2.1-1.6s-2.2-.6-3.8-.6-2.2,0-3.4.3-2.4.4-3.6.8v22.4h-3.8v-24.3Z"/>
-      <path d="M380.7,154.1c-1.9,0-3.4-.6-4.7-1.7-1.3-1.1-1.9-2.9-1.9-5.1v-16.5h-4.6v-3.5h4.6v-7.5h3.8v7.5h6.8v3.5h-6.8v15.3c0,1.5.2,2.6.7,3.3s1.4,1.1,2.8,1.1,1.3,0,1.9-.2,1.1-.3,1.5-.5v3.6c-.5.2-1.1.3-1.9.5s-1.5.2-2.1.2Z"/>
-      <path d="M402,154.4c-2.5,0-4.7-.5-6.5-1.6-1.8-1-3.3-2.6-4.2-4.7-1-2.1-1.5-4.7-1.5-7.8,0-4.6,1-8,3.1-10.3,2.1-2.3,4.9-3.4,8.5-3.4s5.1.6,6.8,1.9c1.7,1.3,2.9,3,3.7,5.1.7,2.2,1.1,4.6,1.1,7.3h-21.3l.3-3.5h18.5l-1.5.5c-.1-2.6-.8-4.6-2-5.9-1.2-1.3-3.1-2-5.6-2s-3.2.3-4.3,1c-1.1.6-2,1.7-2.6,3.3s-.8,3.8-.8,6.6.8,5.7,2.3,7.3c1.5,1.7,3.6,2.5,6.3,2.5s2.5,0,3.6-.3,2.1-.5,3-.8c.9-.4,1.7-.7,2.4-1.2v3.9c-1.3.6-2.7,1.1-4.2,1.4-1.5.3-3.2.5-5.1.5Z"/>
-      <path d="M419.5,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1-1.6.2-2.4.3c-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
-      <path d="M446.4,154.4c-1.9,0-3.5-.2-4.8-.6s-2.6-.9-4-1.6v-4c1.1.6,2.1,1.1,2.9,1.5s1.7.7,2.6.9c.9.2,1.9.3,3,.3,1.8,0,3.2-.4,4.3-1.2,1.1-.8,1.7-1.8,1.7-3s-.3-1.7-.8-2.3-1.2-1-2.1-1.3c-.8-.4-1.7-.7-2.7-1.1-1-.3-2.1-.6-3.1-.9-1-.3-2-.8-2.9-1.3-.9-.5-1.6-1.3-2.1-2.1-.5-.9-.8-2-.8-3.4s.3-2.5.8-3.4c.5-1,1.3-1.7,2.1-2.4.9-.6,1.9-1.1,3-1.4,1.1-.3,2.2-.4,3.3-.4,1.6,0,2.9.2,4.1.6,1.1.4,2.3.9,3.5,1.4v3.8c-1.3-.7-2.5-1.3-3.6-1.7-1.1-.4-2.3-.7-3.8-.7s-2.7.3-3.9.9c-1.1.6-1.7,1.5-1.7,2.7s.3,1.8.9,2.4,1.4,1,2.3,1.4c1,.3,2,.7,3.1,1,.9.3,1.8.6,2.8.9,1,.3,1.8.8,2.7,1.3.8.5,1.5,1.3,2,2.1.5.9.8,2,.8,3.4s-.5,3.4-1.4,4.6-2.2,2.1-3.6,2.7c-1.5.6-3,.8-4.5.8Z"/>
-    </g>
-  </g>
-</svg>
@@ -1,28 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<svg id="a" xmlns="http://www.w3.org/2000/svg" width="180.62mm" height="180.62mm" viewBox="0 0 300 400" xmlns:c2pa="http://c2pa.org/manifest">
-  <rect x="0" y="0" width="300" height="400" fill="none"/>
-  <g fill="#ffffff" transform="translate(3,365) scale(0.13)">
-    <g>
-      <path d="M139.4.8l-.2,62c-34.3,0-63.4,21.8-73.2,51.9C26.4,141,.2,187.8.2,241.3H0l.2-101.3C.2,63.1,62.4.8,139.4.8Z"/>
-      <path d="M139.1,92.5l-.8,62.5c-42.6,0-77.1,38.6-77.1,86.3l1-103.9c0-7.9,1.3-15.5,3.6-22.7,21.2-14.1,46.3-22.3,73.2-22.3Z"/>
-      <path d="M65.9,114.7c-2.3,7.2-3.6,14.8-3.6,22.7l-1,103.9H.2c0-53.5,26.3-100.3,65.7-126.6Z"/>
-    </g>
-    <polygon points="202.8 .4 202.8 92.9 226.2 92.9 226.2 56 259.8 56 259.8 36.1 226.2 36.1 226.2 19.4 265.7 19.4 265.7 0 202.8 .4"/>
-    <polygon points="282.3 -.3 282.3 93 346.1 93 346.1 72.4 306.8 72.4 306.8 55.6 341.7 55.6 341.7 36.4 306.5 36.4 306.5 19.6 346.2 19.6 346.2 -.3 282.3 -.3"/>
-    <polygon points="365.9 92.8 429.5 92.8 429.5 70.9 389.6 70.9 389.6 .2 365 .2 365.9 92.8"/>
-    <polygon points="448 0 471.9 0 471.9 92.5 447.5 92.5 448 0"/>
-    <path d="M485.1,92.5s34.7-44.3,33.4-46.5S485.7,0,485.7,0h29l18.4,24.8L550.1,0h26.6l-29.9,45.4,33.1,46.8h-28.8l-19.3-27.4-18.9,28.1-27.9-.4Z"/>
-    <g>
-      <path d="M210.9,154.1c-1.9,0-3.7-.2-5.3-.7-1.6-.4-3-1-4.2-1.6v-3.9c1.1.6,2.4,1.1,3.9,1.6,1.5.5,3.2.7,5.1.7,3.1,0,5.5-.6,7.2-1.7,1.7-1.2,2.5-2.8,2.5-5s-.8-3.9-2.5-5c-1.7-1.2-4.2-1.7-7.4-1.7h-3.9v-3.7h4c2.6,0,4.5-.5,5.9-1.5,1.4-1,2-2.4,2-4.2s-.3-2.3-1-3.1c-.6-.8-1.6-1.5-2.8-1.9-1.3-.4-2.8-.7-4.6-.7s-3,.2-4.3.6c-1.3.4-2.4.8-3.3,1.3v-3.9c1.1-.5,2.3-.9,3.6-1.3,1.3-.4,2.8-.5,4.5-.5s4,.3,5.5.8c1.5.5,2.7,1.3,3.6,2.2.9.9,1.6,1.9,2,3.1.4,1.1.6,2.3.6,3.4s-.2,2.4-.7,3.3c-.5.9-1,1.7-1.6,2.2-.6.6-1.4,1.1-2.3,1.6,1.3.7,2.3,1.4,3.2,2.1s1.6,1.7,2.2,2.8c.6,1.1,1,2.5,1,4.2s-.2,2.5-.7,3.8c-.5,1.2-1.2,2.4-2.2,3.4s-2.4,1.8-4,2.4c-1.7.6-3.7.9-6.1.9Z"/>
-      <path d="M232.1,153.7v-35.4h11.1c5.5,0,9.7,1.5,12.4,4.4,2.8,3,4.2,7.4,4.2,13.2s-1.4,10.3-4.2,13.2c-2.8,3-6.9,4.5-12.4,4.5h-11.1ZM235.9,150h7c4.5,0,7.8-1.1,9.9-3.4,2-2.3,3.1-5.8,3.1-10.7s-1-8.4-3.1-10.7c-2-2.3-5.3-3.4-9.9-3.4h-7v28.2Z"/>
-      <path d="M291.9,154.4c-.8,0-1.7-.1-2.6-.3-1-.2-1.9-.5-2.8-.8-.9-.3-1.7-.7-2.4-1l1.3-1.3v14.2h-3.8v-33.2c0-1.1.3-2,1-2.7.7-.7,1.6-1.2,2.7-1.6,1.1-.4,2.3-.6,3.5-.8,1.2-.2,2.4-.2,3.5-.2,2.1,0,4.1.4,6,1.3,1.9.9,3.4,2.4,4.6,4.5s1.7,5,1.7,8.6-.5,5.1-1.5,7.1c-1,2-2.4,3.5-4.3,4.6-1.9,1.1-4.2,1.6-6.9,1.6ZM291.9,150.9c1.9,0,3.5-.4,4.8-1.2,1.3-.8,2.2-2,2.8-3.5.6-1.5,1-3.2,1-5.1s-.2-3.7-.6-5.4c-.4-1.7-1.2-3-2.4-4-1.2-1-3-1.5-5.2-1.5s-3.4.2-4.8.6c-1.4.4-2,1-2,1.8v16.4c1.1.6,2.2,1.1,3.3,1.4s2.2.5,3.3.5Z"/>
-      <path d="M311.1,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1c-.8,0-1.6.2-2.4.3-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
-      <path d="M330.5,122.5v-4.2h4.2v4.2h-4.2ZM330.8,153.7v-26.4h3.8v26.4h-3.8Z"/>
-      <path d="M342.7,129.3c.8-.4,1.7-.8,2.6-1.1.9-.3,1.8-.6,2.8-.8.9-.2,1.9-.4,2.9-.5,1-.1,2-.2,2.9-.2,2.6,0,4.6.4,6.1,1.1,1.5.8,2.6,1.9,3.3,3.3.7,1.4,1,3.2,1,5.2v17.2h-3.8v-17.2c0-.6,0-1.3-.2-2-.2-.7-.5-1.4-.9-2-.5-.7-1.2-1.2-2.1-1.6s-2.2-.6-3.8-.6-2.2,0-3.4.3-2.4.4-3.6.8v22.4h-3.8v-24.3Z"/>
-      <path d="M380.7,154.1c-1.9,0-3.4-.6-4.7-1.7-1.3-1.1-1.9-2.9-1.9-5.1v-16.5h-4.6v-3.5h4.6v-7.5h3.8v7.5h6.8v3.5h-6.8v15.3c0,1.5.2,2.6.7,3.3s1.4,1.1,2.8,1.1,1.3,0,1.9-.2,1.1-.3,1.5-.5v3.6c-.5.2-1.1.3-1.9.5s-1.5.2-2.1.2Z"/>
-      <path d="M402,154.4c-2.5,0-4.7-.5-6.5-1.6-1.8-1-3.3-2.6-4.2-4.7-1-2.1-1.5-4.7-1.5-7.8,0-4.6,1-8,3.1-10.3,2.1-2.3,4.9-3.4,8.5-3.4s5.1.6,6.8,1.9c1.7,1.3,2.9,3,3.7,5.1.7,2.2,1.1,4.6,1.1,7.3h-21.3l.3-3.5h18.5l-1.5.5c-.1-2.6-.8-4.6-2-5.9-1.2-1.3-3.1-2-5.6-2s-3.2.3-4.3,1c-1.1.6-2,1.7-2.6,3.3s-.8,3.8-.8,6.6.8,5.7,2.3,7.3c1.5,1.7,3.6,2.5,6.3,2.5s2.5,0,3.6-.3,2.1-.5,3-.8c.9-.4,1.7-.7,2.4-1.2v3.9c-1.3.6-2.7,1.1-4.2,1.4-1.5.3-3.2.5-5.1.5Z"/>
-      <path d="M419.5,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1-1.6.2-2.4.3c-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
-      <path d="M446.4,154.4c-1.9,0-3.5-.2-4.8-.6s-2.6-.9-4-1.6v-4c1.1.6,2.1,1.1,2.9,1.5s1.7.7,2.6.9c.9.2,1.9.3,3,.3,1.8,0,3.2-.4,4.3-1.2,1.1-.8,1.7-1.8,1.7-3s-.3-1.7-.8-2.3-1.2-1-2.1-1.3c-.8-.4-1.7-.7-2.7-1.1-1-.3-2.1-.6-3.1-.9-1-.3-2-.8-2.9-1.3-.9-.5-1.6-1.3-2.1-2.1-.5-.9-.8-2-.8-3.4s.3-2.5.8-3.4c.5-1,1.3-1.7,2.1-2.4.9-.6,1.9-1.1,3-1.4,1.1-.3,2.2-.4,3.3-.4,1.6,0,2.9.2,4.1.6,1.1.4,2.3.9,3.5,1.4v3.8c-1.3-.7-2.5-1.3-3.6-1.7-1.1-.4-2.3-.7-3.8-.7s-2.7.3-3.9.9c-1.1.6-1.7,1.5-1.7,2.7s.3,1.8.9,2.4,1.4,1,2.3,1.4c1,.3,2,.7,3.1,1,.9.3,1.8.6,2.8.9,1,.3,1.8.8,2.7,1.3.8.5,1.5,1.3,2,2.1.5.9.8,2,.8,3.4s-.5,3.4-1.4,4.6-2.2,2.1-3.6,2.7c-1.5.6-3,.8-4.5.8Z"/>
-    </g>
-  </g>
-</svg>
@@ -1,28 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<svg id="a" xmlns="http://www.w3.org/2000/svg" width="180.62mm" height="180.62mm" viewBox="0 0 235 244" xmlns:c2pa="http://c2pa.org/manifest">
-  <rect x="0" y="0" width="235" height="244" fill="none"/>
-  <g fill="#ffffff" transform="translate(2,215) scale(0.1)">
-    <g>
-      <path d="M139.4.8l-.2,62c-34.3,0-63.4,21.8-73.2,51.9C26.4,141,.2,187.8.2,241.3H0l.2-101.3C.2,63.1,62.4.8,139.4.8Z"/>
-      <path d="M139.1,92.5l-.8,62.5c-42.6,0-77.1,38.6-77.1,86.3l1-103.9c0-7.9,1.3-15.5,3.6-22.7,21.2-14.1,46.3-22.3,73.2-22.3Z"/>
-      <path d="M65.9,114.7c-2.3,7.2-3.6,14.8-3.6,22.7l-1,103.9H.2c0-53.5,26.3-100.3,65.7-126.6Z"/>
-    </g>
-    <polygon points="202.8 .4 202.8 92.9 226.2 92.9 226.2 56 259.8 56 259.8 36.1 226.2 36.1 226.2 19.4 265.7 19.4 265.7 0 202.8 .4"/>
-    <polygon points="282.3 -.3 282.3 93 346.1 93 346.1 72.4 306.8 72.4 306.8 55.6 341.7 55.6 341.7 36.4 306.5 36.4 306.5 19.6 346.2 19.6 346.2 -.3 282.3 -.3"/>
-    <polygon points="365.9 92.8 429.5 92.8 429.5 70.9 389.6 70.9 389.6 .2 365 .2 365.9 92.8"/>
-    <polygon points="448 0 471.9 0 471.9 92.5 447.5 92.5 448 0"/>
-    <path d="M485.1,92.5s34.7-44.3,33.4-46.5S485.7,0,485.7,0h29l18.4,24.8L550.1,0h26.6l-29.9,45.4,33.1,46.8h-28.8l-19.3-27.4-18.9,28.1-27.9-.4Z"/>
-    <g>
-      <path d="M210.9,154.1c-1.9,0-3.7-.2-5.3-.7-1.6-.4-3-1-4.2-1.6v-3.9c1.1.6,2.4,1.1,3.9,1.6,1.5.5,3.2.7,5.1.7,3.1,0,5.5-.6,7.2-1.7,1.7-1.2,2.5-2.8,2.5-5s-.8-3.9-2.5-5c-1.7-1.2-4.2-1.7-7.4-1.7h-3.9v-3.7h4c2.6,0,4.5-.5,5.9-1.5,1.4-1,2-2.4,2-4.2s-.3-2.3-1-3.1c-.6-.8-1.6-1.5-2.8-1.9-1.3-.4-2.8-.7-4.6-.7s-3,.2-4.3.6c-1.3.4-2.4.8-3.3,1.3v-3.9c1.1-.5,2.3-.9,3.6-1.3,1.3-.4,2.8-.5,4.5-.5s4,.3,5.5.8c1.5.5,2.7,1.3,3.6,2.2.9.9,1.6,1.9,2,3.1.4,1.1.6,2.3.6,3.4s-.2,2.4-.7,3.3c-.5.9-1,1.7-1.6,2.2-.6.6-1.4,1.1-2.3,1.6,1.3.7,2.3,1.4,3.2,2.1s1.6,1.7,2.2,2.8c.6,1.1,1,2.5,1,4.2s-.2,2.5-.7,3.8c-.5,1.2-1.2,2.4-2.2,3.4s-2.4,1.8-4,2.4c-1.7.6-3.7.9-6.1.9Z"/>
-      <path d="M232.1,153.7v-35.4h11.1c5.5,0,9.7,1.5,12.4,4.4,2.8,3,4.2,7.4,4.2,13.2s-1.4,10.3-4.2,13.2c-2.8,3-6.9,4.5-12.4,4.5h-11.1ZM235.9,150h7c4.5,0,7.8-1.1,9.9-3.4,2-2.3,3.1-5.8,3.1-10.7s-1-8.4-3.1-10.7c-2-2.3-5.3-3.4-9.9-3.4h-7v28.2Z"/>
-      <path d="M291.9,154.4c-.8,0-1.7-.1-2.6-.3-1-.2-1.9-.5-2.8-.8-.9-.3-1.7-.7-2.4-1l1.3-1.3v14.2h-3.8v-33.2c0-1.1.3-2,1-2.7.7-.7,1.6-1.2,2.7-1.6,1.1-.4,2.3-.6,3.5-.8,1.2-.2,2.4-.2,3.5-.2,2.1,0,4.1.4,6,1.3,1.9.9,3.4,2.4,4.6,4.5s1.7,5,1.7,8.6-.5,5.1-1.5,7.1c-1,2-2.4,3.5-4.3,4.6-1.9,1.1-4.2,1.6-6.9,1.6ZM291.9,150.9c1.9,0,3.5-.4,4.8-1.2,1.3-.8,2.2-2,2.8-3.5.6-1.5,1-3.2,1-5.1s-.2-3.7-.6-5.4c-.4-1.7-1.2-3-2.4-4-1.2-1-3-1.5-5.2-1.5s-3.4.2-4.8.6c-1.4.4-2,1-2,1.8v16.4c1.1.6,2.2,1.1,3.3,1.4s2.2.5,3.3.5Z"/>
-      <path d="M311.1,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1c-.8,0-1.6.2-2.4.3-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
-      <path d="M330.5,122.5v-4.2h4.2v4.2h-4.2ZM330.8,153.7v-26.4h3.8v26.4h-3.8Z"/>
-      <path d="M342.7,129.3c.8-.4,1.7-.8,2.6-1.1.9-.3,1.8-.6,2.8-.8.9-.2,1.9-.4,2.9-.5,1-.1,2-.2,2.9-.2,2.6,0,4.6.4,6.1,1.1,1.5.8,2.6,1.9,3.3,3.3.7,1.4,1,3.2,1,5.2v17.2h-3.8v-17.2c0-.6,0-1.3-.2-2-.2-.7-.5-1.4-.9-2-.5-.7-1.2-1.2-2.1-1.6s-2.2-.6-3.8-.6-2.2,0-3.4.3-2.4.4-3.6.8v22.4h-3.8v-24.3Z"/>
-      <path d="M380.7,154.1c-1.9,0-3.4-.6-4.7-1.7-1.3-1.1-1.9-2.9-1.9-5.1v-16.5h-4.6v-3.5h4.6v-7.5h3.8v7.5h6.8v3.5h-6.8v15.3c0,1.5.2,2.6.7,3.3s1.4,1.1,2.8,1.1,1.3,0,1.9-.2,1.1-.3,1.5-.5v3.6c-.5.2-1.1.3-1.9.5s-1.5.2-2.1.2Z"/>
-      <path d="M402,154.4c-2.5,0-4.7-.5-6.5-1.6-1.8-1-3.3-2.6-4.2-4.7-1-2.1-1.5-4.7-1.5-7.8,0-4.6,1-8,3.1-10.3,2.1-2.3,4.9-3.4,8.5-3.4s5.1.6,6.8,1.9c1.7,1.3,2.9,3,3.7,5.1.7,2.2,1.1,4.6,1.1,7.3h-21.3l.3-3.5h18.5l-1.5.5c-.1-2.6-.8-4.6-2-5.9-1.2-1.3-3.1-2-5.6-2s-3.2.3-4.3,1c-1.1.6-2,1.7-2.6,3.3s-.8,3.8-.8,6.6.8,5.7,2.3,7.3c1.5,1.7,3.6,2.5,6.3,2.5s2.5,0,3.6-.3,2.1-.5,3-.8c.9-.4,1.7-.7,2.4-1.2v3.9c-1.3.6-2.7,1.1-4.2,1.4-1.5.3-3.2.5-5.1.5Z"/>
-      <path d="M419.5,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1-1.6.2-2.4.3c-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
-      <path d="M446.4,154.4c-1.9,0-3.5-.2-4.8-.6s-2.6-.9-4-1.6v-4c1.1.6,2.1,1.1,2.9,1.5s1.7.7,2.6.9c.9.2,1.9.3,3,.3,1.8,0,3.2-.4,4.3-1.2,1.1-.8,1.7-1.8,1.7-3s-.3-1.7-.8-2.3-1.2-1-2.1-1.3c-.8-.4-1.7-.7-2.7-1.1-1-.3-2.1-.6-3.1-.9-1-.3-2-.8-2.9-1.3-.9-.5-1.6-1.3-2.1-2.1-.5-.9-.8-2-.8-3.4s.3-2.5.8-3.4c.5-1,1.3-1.7,2.1-2.4.9-.6,1.9-1.1,3-1.4,1.1-.3,2.2-.4,3.3-.4,1.6,0,2.9.2,4.1.6,1.1.4,2.3.9,3.5,1.4v3.8c-1.3-.7-2.5-1.3-3.6-1.7-1.1-.4-2.3-.7-3.8-.7s-2.7.3-3.9.9c-1.1.6-1.7,1.5-1.7,2.7s.3,1.8.9,2.4,1.4,1,2.3,1.4c1,.3,2,.7,3.1,1,.9.3,1.8.6,2.8.9,1,.3,1.8.8,2.7,1.3.8.5,1.5,1.3,2,2.1.5.9.8,2,.8,3.4s-.5,3.4-1.4,4.6-2.2,2.1-3.6,2.7c-1.5.6-3,.8-4.5.8Z"/>
-    </g>
-  </g>
-</svg>
@@ -1,28 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<svg id="a" xmlns="http://www.w3.org/2000/svg" width="180.62mm" height="180.62mm" viewBox="0 0 600 400" xmlns:c2pa="http://c2pa.org/manifest">
-  <rect x="0" y="0" width="600" height="400" fill="none"/>
-  <g fill="#ffffff" transform="translate(4,357) scale(0.16)">
-    <g>
-      <path d="M139.4.8l-.2,62c-34.3,0-63.4,21.8-73.2,51.9C26.4,141,.2,187.8.2,241.3H0l.2-101.3C.2,63.1,62.4.8,139.4.8Z"/>
-      <path d="M139.1,92.5l-.8,62.5c-42.6,0-77.1,38.6-77.1,86.3l1-103.9c0-7.9,1.3-15.5,3.6-22.7,21.2-14.1,46.3-22.3,73.2-22.3Z"/>
-      <path d="M65.9,114.7c-2.3,7.2-3.6,14.8-3.6,22.7l-1,103.9H.2c0-53.5,26.3-100.3,65.7-126.6Z"/>
-    </g>
-    <polygon points="202.8 .4 202.8 92.9 226.2 92.9 226.2 56 259.8 56 259.8 36.1 226.2 36.1 226.2 19.4 265.7 19.4 265.7 0 202.8 .4"/>
-    <polygon points="282.3 -.3 282.3 93 346.1 93 346.1 72.4 306.8 72.4 306.8 55.6 341.7 55.6 341.7 36.4 306.5 36.4 306.5 19.6 346.2 19.6 346.2 -.3 282.3 -.3"/>
-    <polygon points="365.9 92.8 429.5 92.8 429.5 70.9 389.6 70.9 389.6 .2 365 .2 365.9 92.8"/>
-    <polygon points="448 0 471.9 0 471.9 92.5 447.5 92.5 448 0"/>
-    <path d="M485.1,92.5s34.7-44.3,33.4-46.5S485.7,0,485.7,0h29l18.4,24.8L550.1,0h26.6l-29.9,45.4,33.1,46.8h-28.8l-19.3-27.4-18.9,28.1-27.9-.4Z"/>
-    <g>
-      <path d="M210.9,154.1c-1.9,0-3.7-.2-5.3-.7-1.6-.4-3-1-4.2-1.6v-3.9c1.1.6,2.4,1.1,3.9,1.6,1.5.5,3.2.7,5.1.7,3.1,0,5.5-.6,7.2-1.7,1.7-1.2,2.5-2.8,2.5-5s-.8-3.9-2.5-5c-1.7-1.2-4.2-1.7-7.4-1.7h-3.9v-3.7h4c2.6,0,4.5-.5,5.9-1.5,1.4-1,2-2.4,2-4.2s-.3-2.3-1-3.1c-.6-.8-1.6-1.5-2.8-1.9-1.3-.4-2.8-.7-4.6-.7s-3,.2-4.3.6c-1.3.4-2.4.8-3.3,1.3v-3.9c1.1-.5,2.3-.9,3.6-1.3,1.3-.4,2.8-.5,4.5-.5s4,.3,5.5.8c1.5.5,2.7,1.3,3.6,2.2.9.9,1.6,1.9,2,3.1.4,1.1.6,2.3.6,3.4s-.2,2.4-.7,3.3c-.5.9-1,1.7-1.6,2.2-.6.6-1.4,1.1-2.3,1.6,1.3.7,2.3,1.4,3.2,2.1s1.6,1.7,2.2,2.8c.6,1.1,1,2.5,1,4.2s-.2,2.5-.7,3.8c-.5,1.2-1.2,2.4-2.2,3.4s-2.4,1.8-4,2.4c-1.7.6-3.7.9-6.1.9Z"/>
-      <path d="M232.1,153.7v-35.4h11.1c5.5,0,9.7,1.5,12.4,4.4,2.8,3,4.2,7.4,4.2,13.2s-1.4,10.3-4.2,13.2c-2.8,3-6.9,4.5-12.4,4.5h-11.1ZM235.9,150h7c4.5,0,7.8-1.1,9.9-3.4,2-2.3,3.1-5.8,3.1-10.7s-1-8.4-3.1-10.7c-2-2.3-5.3-3.4-9.9-3.4h-7v28.2Z"/>
-      <path d="M291.9,154.4c-.8,0-1.7-.1-2.6-.3-1-.2-1.9-.5-2.8-.8-.9-.3-1.7-.7-2.4-1l1.3-1.3v14.2h-3.8v-33.2c0-1.1.3-2,1-2.7.7-.7,1.6-1.2,2.7-1.6,1.1-.4,2.3-.6,3.5-.8,1.2-.2,2.4-.2,3.5-.2,2.1,0,4.1.4,6,1.3,1.9.9,3.4,2.4,4.6,4.5s1.7,5,1.7,8.6-.5,5.1-1.5,7.1c-1,2-2.4,3.5-4.3,4.6-1.9,1.1-4.2,1.6-6.9,1.6ZM291.9,150.9c1.9,0,3.5-.4,4.8-1.2,1.3-.8,2.2-2,2.8-3.5.6-1.5,1-3.2,1-5.1s-.2-3.7-.6-5.4c-.4-1.7-1.2-3-2.4-4-1.2-1-3-1.5-5.2-1.5s-3.4.2-4.8.6c-1.4.4-2,1-2,1.8v16.4c1.1.6,2.2,1.1,3.3,1.4s2.2.5,3.3.5Z"/>
-      <path d="M311.1,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1c-.8,0-1.6.2-2.4.3-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
-      <path d="M330.5,122.5v-4.2h4.2v4.2h-4.2ZM330.8,153.7v-26.4h3.8v26.4h-3.8Z"/>
-      <path d="M342.7,129.3c.8-.4,1.7-.8,2.6-1.1.9-.3,1.8-.6,2.8-.8.9-.2,1.9-.4,2.9-.5,1-.1,2-.2,2.9-.2,2.6,0,4.6.4,6.1,1.1,1.5.8,2.6,1.9,3.3,3.3.7,1.4,1,3.2,1,5.2v17.2h-3.8v-17.2c0-.6,0-1.3-.2-2-.2-.7-.5-1.4-.9-2-.5-.7-1.2-1.2-2.1-1.6s-2.2-.6-3.8-.6-2.2,0-3.4.3-2.4.4-3.6.8v22.4h-3.8v-24.3Z"/>
-      <path d="M380.7,154.1c-1.9,0-3.4-.6-4.7-1.7-1.3-1.1-1.9-2.9-1.9-5.1v-16.5h-4.6v-3.5h4.6v-7.5h3.8v7.5h6.8v3.5h-6.8v15.3c0,1.5.2,2.6.7,3.3s1.4,1.1,2.8,1.1,1.3,0,1.9-.2,1.1-.3,1.5-.5v3.6c-.5.2-1.1.3-1.9.5s-1.5.2-2.1.2Z"/>
-      <path d="M402,154.4c-2.5,0-4.7-.5-6.5-1.6-1.8-1-3.3-2.6-4.2-4.7-1-2.1-1.5-4.7-1.5-7.8,0-4.6,1-8,3.1-10.3,2.1-2.3,4.9-3.4,8.5-3.4s5.1.6,6.8,1.9c1.7,1.3,2.9,3,3.7,5.1.7,2.2,1.1,4.6,1.1,7.3h-21.3l.3-3.5h18.5l-1.5.5c-.1-2.6-.8-4.6-2-5.9-1.2-1.3-3.1-2-5.6-2s-3.2.3-4.3,1c-1.1.6-2,1.7-2.6,3.3s-.8,3.8-.8,6.6.8,5.7,2.3,7.3c1.5,1.7,3.6,2.5,6.3,2.5s2.5,0,3.6-.3,2.1-.5,3-.8c.9-.4,1.7-.7,2.4-1.2v3.9c-1.3.6-2.7,1.1-4.2,1.4-1.5.3-3.2.5-5.1.5Z"/>
-      <path d="M419.5,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1-1.6.2-2.4.3c-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
-      <path d="M446.4,154.4c-1.9,0-3.5-.2-4.8-.6s-2.6-.9-4-1.6v-4c1.1.6,2.1,1.1,2.9,1.5s1.7.7,2.6.9c.9.2,1.9.3,3,.3,1.8,0,3.2-.4,4.3-1.2,1.1-.8,1.7-1.8,1.7-3s-.3-1.7-.8-2.3-1.2-1-2.1-1.3c-.8-.4-1.7-.7-2.7-1.1-1-.3-2.1-.6-3.1-.9-1-.3-2-.8-2.9-1.3-.9-.5-1.6-1.3-2.1-2.1-.5-.9-.8-2-.8-3.4s.3-2.5.8-3.4c.5-1,1.3-1.7,2.1-2.4.9-.6,1.9-1.1,3-1.4,1.1-.3,2.2-.4,3.3-.4,1.6,0,2.9.2,4.1.6,1.1.4,2.3.9,3.5,1.4v3.8c-1.3-.7-2.5-1.3-3.6-1.7-1.1-.4-2.3-.7-3.8-.7s-2.7.3-3.9.9c-1.1.6-1.7,1.5-1.7,2.7s.3,1.8.9,2.4,1.4,1,2.3,1.4c1,.3,2,.7,3.1,1,.9.3,1.8.6,2.8.9,1,.3,1.8.8,2.7,1.3.8.5,1.5,1.3,2,2.1.5.9.8,2,.8,3.4s-.5,3.4-1.4,4.6-2.2,2.1-3.6,2.7c-1.5.6-3,.8-4.5.8Z"/>
-    </g>
-  </g>
-</svg>
@@ -1,28 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<svg id="a" xmlns="http://www.w3.org/2000/svg" width="180.62mm" height="180.62mm" viewBox="0 0 205 255" xmlns:c2pa="http://c2pa.org/manifest">
-  <rect x="0" y="0" width="205" height="255" fill="none"/>
-  <g fill="#ffffff" transform="translate(3,228) scale(0.1)">
-    <g>
-      <path d="M139.4.8l-.2,62c-34.3,0-63.4,21.8-73.2,51.9C26.4,141,.2,187.8.2,241.3H0l.2-101.3C.2,63.1,62.4.8,139.4.8Z"/>
-      <path d="M139.1,92.5l-.8,62.5c-42.6,0-77.1,38.6-77.1,86.3l1-103.9c0-7.9,1.3-15.5,3.6-22.7,21.2-14.1,46.3-22.3,73.2-22.3Z"/>
-      <path d="M65.9,114.7c-2.3,7.2-3.6,14.8-3.6,22.7l-1,103.9H.2c0-53.5,26.3-100.3,65.7-126.6Z"/>
-    </g>
-    <polygon points="202.8 .4 202.8 92.9 226.2 92.9 226.2 56 259.8 56 259.8 36.1 226.2 36.1 226.2 19.4 265.7 19.4 265.7 0 202.8 .4"/>
-    <polygon points="282.3 -.3 282.3 93 346.1 93 346.1 72.4 306.8 72.4 306.8 55.6 341.7 55.6 341.7 36.4 306.5 36.4 306.5 19.6 346.2 19.6 346.2 -.3 282.3 -.3"/>
-    <polygon points="365.9 92.8 429.5 92.8 429.5 70.9 389.6 70.9 389.6 .2 365 .2 365.9 92.8"/>
-    <polygon points="448 0 471.9 0 471.9 92.5 447.5 92.5 448 0"/>
-    <path d="M485.1,92.5s34.7-44.3,33.4-46.5S485.7,0,485.7,0h29l18.4,24.8L550.1,0h26.6l-29.9,45.4,33.1,46.8h-28.8l-19.3-27.4-18.9,28.1-27.9-.4Z"/>
-    <g>
-      <path d="M210.9,154.1c-1.9,0-3.7-.2-5.3-.7-1.6-.4-3-1-4.2-1.6v-3.9c1.1.6,2.4,1.1,3.9,1.6,1.5.5,3.2.7,5.1.7,3.1,0,5.5-.6,7.2-1.7,1.7-1.2,2.5-2.8,2.5-5s-.8-3.9-2.5-5c-1.7-1.2-4.2-1.7-7.4-1.7h-3.9v-3.7h4c2.6,0,4.5-.5,5.9-1.5,1.4-1,2-2.4,2-4.2s-.3-2.3-1-3.1c-.6-.8-1.6-1.5-2.8-1.9-1.3-.4-2.8-.7-4.6-.7s-3,.2-4.3.6c-1.3.4-2.4.8-3.3,1.3v-3.9c1.1-.5,2.3-.9,3.6-1.3,1.3-.4,2.8-.5,4.5-.5s4,.3,5.5.8c1.5.5,2.7,1.3,3.6,2.2.9.9,1.6,1.9,2,3.1.4,1.1.6,2.3.6,3.4s-.2,2.4-.7,3.3c-.5.9-1,1.7-1.6,2.2-.6.6-1.4,1.1-2.3,1.6,1.3.7,2.3,1.4,3.2,2.1s1.6,1.7,2.2,2.8c.6,1.1,1,2.5,1,4.2s-.2,2.5-.7,3.8c-.5,1.2-1.2,2.4-2.2,3.4s-2.4,1.8-4,2.4c-1.7.6-3.7.9-6.1.9Z"/>
-      <path d="M232.1,153.7v-35.4h11.1c5.5,0,9.7,1.5,12.4,4.4,2.8,3,4.2,7.4,4.2,13.2s-1.4,10.3-4.2,13.2c-2.8,3-6.9,4.5-12.4,4.5h-11.1ZM235.9,150h7c4.5,0,7.8-1.1,9.9-3.4,2-2.3,3.1-5.8,3.1-10.7s-1-8.4-3.1-10.7c-2-2.3-5.3-3.4-9.9-3.4h-7v28.2Z"/>
-      <path d="M291.9,154.4c-.8,0-1.7-.1-2.6-.3-1-.2-1.9-.5-2.8-.8-.9-.3-1.7-.7-2.4-1l1.3-1.3v14.2h-3.8v-33.2c0-1.1.3-2,1-2.7.7-.7,1.6-1.2,2.7-1.6,1.1-.4,2.3-.6,3.5-.8,1.2-.2,2.4-.2,3.5-.2,2.1,0,4.1.4,6,1.3,1.9.9,3.4,2.4,4.6,4.5s1.7,5,1.7,8.6-.5,5.1-1.5,7.1c-1,2-2.4,3.5-4.3,4.6-1.9,1.1-4.2,1.6-6.9,1.6ZM291.9,150.9c1.9,0,3.5-.4,4.8-1.2,1.3-.8,2.2-2,2.8-3.5.6-1.5,1-3.2,1-5.1s-.2-3.7-.6-5.4c-.4-1.7-1.2-3-2.4-4-1.2-1-3-1.5-5.2-1.5s-3.4.2-4.8.6c-1.4.4-2,1-2,1.8v16.4c1.1.6,2.2,1.1,3.3,1.4s2.2.5,3.3.5Z"/>
-      <path d="M311.1,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1c-.8,0-1.6.2-2.4.3-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
-      <path d="M330.5,122.5v-4.2h4.2v4.2h-4.2ZM330.8,153.7v-26.4h3.8v26.4h-3.8Z"/>
-      <path d="M342.7,129.3c.8-.4,1.7-.8,2.6-1.1.9-.3,1.8-.6,2.8-.8.9-.2,1.9-.4,2.9-.5,1-.1,2-.2,2.9-.2,2.6,0,4.6.4,6.1,1.1,1.5.8,2.6,1.9,3.3,3.3.7,1.4,1,3.2,1,5.2v17.2h-3.8v-17.2c0-.6,0-1.3-.2-2-.2-.7-.5-1.4-.9-2-.5-.7-1.2-1.2-2.1-1.6s-2.2-.6-3.8-.6-2.2,0-3.4.3-2.4.4-3.6.8v22.4h-3.8v-24.3Z"/>
-      <path d="M380.7,154.1c-1.9,0-3.4-.6-4.7-1.7-1.3-1.1-1.9-2.9-1.9-5.1v-16.5h-4.6v-3.5h4.6v-7.5h3.8v7.5h6.8v3.5h-6.8v15.3c0,1.5.2,2.6.7,3.3s1.4,1.1,2.8,1.1,1.3,0,1.9-.2,1.1-.3,1.5-.5v3.6c-.5.2-1.1.3-1.9.5s-1.5.2-2.1.2Z"/>
-      <path d="M402,154.4c-2.5,0-4.7-.5-6.5-1.6-1.8-1-3.3-2.6-4.2-4.7-1-2.1-1.5-4.7-1.5-7.8,0-4.6,1-8,3.1-10.3,2.1-2.3,4.9-3.4,8.5-3.4s5.1.6,6.8,1.9c1.7,1.3,2.9,3,3.7,5.1.7,2.2,1.1,4.6,1.1,7.3h-21.3l.3-3.5h18.5l-1.5.5c-.1-2.6-.8-4.6-2-5.9-1.2-1.3-3.1-2-5.6-2s-3.2.3-4.3,1c-1.1.6-2,1.7-2.6,3.3s-.8,3.8-.8,6.6.8,5.7,2.3,7.3c1.5,1.7,3.6,2.5,6.3,2.5s2.5,0,3.6-.3,2.1-.5,3-.8c.9-.4,1.7-.7,2.4-1.2v3.9c-1.3.6-2.7,1.1-4.2,1.4-1.5.3-3.2.5-5.1.5Z"/>
-      <path d="M419.5,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1-1.6.2-2.4.3c-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
-      <path d="M446.4,154.4c-1.9,0-3.5-.2-4.8-.6s-2.6-.9-4-1.6v-4c1.1.6,2.1,1.1,2.9,1.5s1.7.7,2.6.9c.9.2,1.9.3,3,.3,1.8,0,3.2-.4,4.3-1.2,1.1-.8,1.7-1.8,1.7-3s-.3-1.7-.8-2.3-1.2-1-2.1-1.3c-.8-.4-1.7-.7-2.7-1.1-1-.3-2.1-.6-3.1-.9-1-.3-2-.8-2.9-1.3-.9-.5-1.6-1.3-2.1-2.1-.5-.9-.8-2-.8-3.4s.3-2.5.8-3.4c.5-1,1.3-1.7,2.1-2.4.9-.6,1.9-1.1,3-1.4,1.1-.3,2.2-.4,3.3-.4,1.6,0,2.9.2,4.1.6,1.1.4,2.3.9,3.5,1.4v3.8c-1.3-.7-2.5-1.3-3.6-1.7-1.1-.4-2.3-.7-3.8-.7s-2.7.3-3.9.9c-1.1.6-1.7,1.5-1.7,2.7s.3,1.8.9,2.4,1.4,1,2.3,1.4c1,.3,2,.7,3.1,1,.9.3,1.8.6,2.8.9,1,.3,1.8.8,2.7,1.3.8.5,1.5,1.3,2,2.1.5.9.8,2,.8,3.4s-.5,3.4-1.4,4.6-2.2,2.1-3.6,2.7c-1.5.6-3,.8-4.5.8Z"/>
-    </g>
-  </g>
-</svg>
@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Medium Plastic  Syringe  @0.50mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "tMekgIpgrPXZGclm",
-  "filament_id": "OFcHPSYQ",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 0.50mm nozzle",
-    "FELIX Food Double 0.50mm nozzle",
-    "FELIX Food Switch 0.50mm nozzle"
-  ],
-  "filament_diameter": [
-    "31.22"
-  ],
-  "filament_flow_ratio": [
-    "1.05"
-  ],
-  "filament_retraction_length": [
-    "3.0"
-  ],
-  "filament_retract_restart_extra": [
-    "0.0"
-  ],
-  "filament_retraction_speed": [
-    "5.0"
-  ],
-  "filament_deretraction_speed": [
-    "5.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "6.0"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "0.75"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "7.2"
-  ]
-}
@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Medium Plastic  Syringe  @1.00mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "crqtmO3TPNKSFBlk",
-  "filament_id": "OFcHPSYQ",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 1.00mm nozzle",
-    "FELIX Food Double 1.00mm nozzle",
-    "FELIX Food Switch 1.00mm nozzle"
-  ],
-  "filament_diameter": [
-    "31.22"
-  ],
-  "filament_flow_ratio": [
-    "1.05"
-  ],
-  "filament_retraction_length": [
-    "3.0"
-  ],
-  "filament_retract_restart_extra": [
-    "0.0"
-  ],
-  "filament_retraction_speed": [
-    "5.0"
-  ],
-  "filament_deretraction_speed": [
-    "5.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "6.0"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "1.5"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "27.0"
-  ]
-}
@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Medium Plastic  Syringe  @2.00mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "IvLdEN3jtyN4UMEs",
-  "filament_id": "OFcHPSYQ",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 2.00mm nozzle",
-    "FELIX Food Double 2.00mm nozzle",
-    "FELIX Food Switch 2.00mm nozzle"
-  ],
-  "filament_diameter": [
-    "31.22"
-  ],
-  "filament_flow_ratio": [
-    "1.05"
-  ],
-  "filament_retraction_length": [
-    "3.0"
-  ],
-  "filament_retract_restart_extra": [
-    "0.0"
-  ],
-  "filament_retraction_speed": [
-    "5.0"
-  ],
-  "filament_deretraction_speed": [
-    "5.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "6.0"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "3.0"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "108.0"
-  ]
-}
@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Medium Plastic  Syringe  @3.00mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "OX0aVYNFcX00KurB",
-  "filament_id": "OFcHPSYQ",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 3.00mm nozzle",
-    "FELIX Food Double 3.00mm nozzle",
-    "FELIX Food Switch 3.00mm nozzle"
-  ],
-  "filament_diameter": [
-    "31.22"
-  ],
-  "filament_flow_ratio": [
-    "1.05"
-  ],
-  "filament_retraction_length": [
-    "3.0"
-  ],
-  "filament_retract_restart_extra": [
-    "0.0"
-  ],
-  "filament_retraction_speed": [
-    "5.0"
-  ],
-  "filament_deretraction_speed": [
-    "5.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "6.0"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "4.5"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "216.0"
-  ]
-}
@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Medium Plastic  Syringe  @4.00mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "cPdxKT14h52CpmgV",
-  "filament_id": "OFcHPSYQ",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 4.00mm nozzle",
-    "FELIX Food Double 4.00mm nozzle",
-    "FELIX Food Switch 4.00mm nozzle"
-  ],
-  "filament_diameter": [
-    "31.22"
-  ],
-  "filament_flow_ratio": [
-    "1.05"
-  ],
-  "filament_retraction_length": [
-    "3.0"
-  ],
-  "filament_retract_restart_extra": [
-    "0.0"
-  ],
-  "filament_retraction_speed": [
-    "5.0"
-  ],
-  "filament_deretraction_speed": [
-    "5.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "6.0"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "6.0"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "432.0"
-  ]
-}
@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Medium Stainless Steel  Syringe  @0.50mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "uYPjYKCYH20fLFrd",
-  "filament_id": "OF77udLK",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 0.50mm nozzle",
-    "FELIX Food Double 0.50mm nozzle",
-    "FELIX Food Switch 0.50mm nozzle"
-  ],
-  "filament_diameter": [
-    "25.4"
-  ],
-  "filament_flow_ratio": [
-    "1.05"
-  ],
-  "filament_retraction_length": [
-    "1.0"
-  ],
-  "filament_retract_restart_extra": [
-    "0.0"
-  ],
-  "filament_retraction_speed": [
-    "10.0"
-  ],
-  "filament_deretraction_speed": [
-    "10.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "2.0"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "0.75"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "7.2"
-  ]
-}
@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Medium Stainless Steel  Syringe  @1.00mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "tDzkw7EWmdzVkiX7",
-  "filament_id": "OF77udLK",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 1.00mm nozzle",
-    "FELIX Food Double 1.00mm nozzle",
-    "FELIX Food Switch 1.00mm nozzle"
-  ],
-  "filament_diameter": [
-    "25.4"
-  ],
-  "filament_flow_ratio": [
-    "1.05"
-  ],
-  "filament_retraction_length": [
-    "1.0"
-  ],
-  "filament_retract_restart_extra": [
-    "0.0"
-  ],
-  "filament_retraction_speed": [
-    "10.0"
-  ],
-  "filament_deretraction_speed": [
-    "10.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "2.0"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "1.5"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "27.0"
-  ]
-}
@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Medium Stainless Steel  Syringe  @2.00mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "MRbFNPR0OlTvFM5I",
-  "filament_id": "OF77udLK",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 2.00mm nozzle",
-    "FELIX Food Double 2.00mm nozzle",
-    "FELIX Food Switch 2.00mm nozzle"
-  ],
-  "filament_diameter": [
-    "25.4"
-  ],
-  "filament_flow_ratio": [
-    "1.05"
-  ],
-  "filament_retraction_length": [
-    "1.0"
-  ],
-  "filament_retract_restart_extra": [
-    "0.0"
-  ],
-  "filament_retraction_speed": [
-    "10.0"
-  ],
-  "filament_deretraction_speed": [
-    "10.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "2.0"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "3.0"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "108.0"
-  ]
-}
@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Medium Stainless Steel  Syringe  @3.00mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "2p6yFR6dcGP5ywnE",
-  "filament_id": "OF77udLK",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 3.00mm nozzle",
-    "FELIX Food Double 3.00mm nozzle",
-    "FELIX Food Switch 3.00mm nozzle"
-  ],
-  "filament_diameter": [
-    "25.4"
-  ],
-  "filament_flow_ratio": [
-    "1.05"
-  ],
-  "filament_retraction_length": [
-    "1.0"
-  ],
-  "filament_retract_restart_extra": [
-    "0.0"
-  ],
-  "filament_retraction_speed": [
-    "10.0"
-  ],
-  "filament_deretraction_speed": [
-    "10.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "2.0"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "4.5"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "216.0"
-  ]
-}
@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Medium Stainless Steel  Syringe  @4.00mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "tJcWbrFnSjwVQ6hU",
-  "filament_id": "OF77udLK",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 4.00mm nozzle",
-    "FELIX Food Double 4.00mm nozzle",
-    "FELIX Food Switch 4.00mm nozzle"
-  ],
-  "filament_diameter": [
-    "25.4"
-  ],
-  "filament_flow_ratio": [
-    "1.05"
-  ],
-  "filament_retraction_length": [
-    "1.0"
-  ],
-  "filament_retract_restart_extra": [
-    "0.0"
-  ],
-  "filament_retraction_speed": [
-    "10.0"
-  ],
-  "filament_deretraction_speed": [
-    "10.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "2.0"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "6.0"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "432.0"
-  ]
-}
@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Thick Stainless Steel  Syringe  @0.50mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "Nn0oJhhVTQeV6XSs",
-  "filament_id": "OFe3TwQN",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 0.50mm nozzle",
-    "FELIX Food Double 0.50mm nozzle",
-    "FELIX Food Switch 0.50mm nozzle"
-  ],
-  "filament_diameter": [
-    "25.4"
-  ],
-  "filament_flow_ratio": [
-    "1.02"
-  ],
-  "filament_retraction_length": [
-    "2.0"
-  ],
-  "filament_retract_restart_extra": [
-    "0.0"
-  ],
-  "filament_retraction_speed": [
-    "5.0"
-  ],
-  "filament_deretraction_speed": [
-    "5.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "4.0"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "0.75"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "4.8"
-  ]
-}
@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Thick Stainless Steel  Syringe  @1.00mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "PxeVnjEvcpckYbpa",
-  "filament_id": "OFe3TwQN",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 1.00mm nozzle",
-    "FELIX Food Double 1.00mm nozzle",
-    "FELIX Food Switch 1.00mm nozzle"
-  ],
-  "filament_diameter": [
-    "25.4"
-  ],
-  "filament_flow_ratio": [
-    "1.02"
-  ],
-  "filament_retraction_length": [
-    "2.0"
-  ],
-  "filament_retract_restart_extra": [
-    "0.0"
-  ],
-  "filament_retraction_speed": [
-    "5.0"
-  ],
-  "filament_deretraction_speed": [
-    "5.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "4.0"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "1.5"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "18.0"
-  ]
-}
@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Thick Stainless Steel  Syringe  @2.00mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "8otrG4XC7QPqQKuT",
-  "filament_id": "OFe3TwQN",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 2.00mm nozzle",
-    "FELIX Food Double 2.00mm nozzle",
-    "FELIX Food Switch 2.00mm nozzle"
-  ],
-  "filament_diameter": [
-    "25.4"
-  ],
-  "filament_flow_ratio": [
-    "1.02"
-  ],
-  "filament_retraction_length": [
-    "2.0"
-  ],
-  "filament_retract_restart_extra": [
-    "0.0"
-  ],
-  "filament_retraction_speed": [
-    "5.0"
-  ],
-  "filament_deretraction_speed": [
-    "5.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "4.0"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "3.0"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "72.0"
-  ]
-}
@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Thick Stainless Steel  Syringe  @3.00mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "fZ7h1dGQB3Xle8wT",
-  "filament_id": "OFe3TwQN",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 3.00mm nozzle",
-    "FELIX Food Double 3.00mm nozzle",
-    "FELIX Food Switch 3.00mm nozzle"
-  ],
-  "filament_diameter": [
-    "25.4"
-  ],
-  "filament_flow_ratio": [
-    "1.02"
-  ],
-  "filament_retraction_length": [
-    "2.0"
-  ],
-  "filament_retract_restart_extra": [
-    "0.0"
-  ],
-  "filament_retraction_speed": [
-    "5.0"
-  ],
-  "filament_deretraction_speed": [
-    "5.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "4.0"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "4.5"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "144.0"
-  ]
-}
@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Thick Stainless Steel  Syringe  @4.00mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "7eZfy2RnDhmDdzRl",
-  "filament_id": "OFe3TwQN",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 4.00mm nozzle",
-    "FELIX Food Double 4.00mm nozzle",
-    "FELIX Food Switch 4.00mm nozzle"
-  ],
-  "filament_diameter": [
-    "25.4"
-  ],
-  "filament_flow_ratio": [
-    "1.02"
-  ],
-  "filament_retraction_length": [
-    "2.0"
-  ],
-  "filament_retract_restart_extra": [
-    "0.0"
-  ],
-  "filament_retraction_speed": [
-    "5.0"
-  ],
-  "filament_deretraction_speed": [
-    "5.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "4.0"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "6.0"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "288.0"
-  ]
-}
@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Thin Plastic  Syringe  @0.50mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "SIQIE6rj7JxxF81f",
-  "filament_id": "OFE0grJq",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 0.50mm nozzle",
-    "FELIX Food Double 0.50mm nozzle",
-    "FELIX Food Switch 0.50mm nozzle"
-  ],
-  "filament_diameter": [
-    "31.22"
-  ],
-  "filament_flow_ratio": [
-    "1.1"
-  ],
-  "filament_retraction_length": [
-    "0.75"
-  ],
-  "filament_retract_restart_extra": [
-    "0.0"
-  ],
-  "filament_retraction_speed": [
-    "5.0"
-  ],
-  "filament_deretraction_speed": [
-    "5.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "1.5"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "0.75"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "10.8"
-  ]
-}
@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Thin Plastic  Syringe  @1.00mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "iuJIPGeN2q6hw3dR",
-  "filament_id": "OFE0grJq",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 1.00mm nozzle",
-    "FELIX Food Double 1.00mm nozzle",
-    "FELIX Food Switch 1.00mm nozzle"
-  ],
-  "filament_diameter": [
-    "31.22"
-  ],
-  "filament_flow_ratio": [
-    "1.1"
-  ],
-  "filament_retraction_length": [
-    "0.75"
-  ],
-  "filament_retract_restart_extra": [
-    "0.0"
-  ],
-  "filament_retraction_speed": [
-    "5.0"
-  ],
-  "filament_deretraction_speed": [
-    "5.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "1.5"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "1.5"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "40.5"
-  ]
-}
@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Thin Plastic  Syringe  @2.00mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "QG1CCkHPaL4q4klZ",
-  "filament_id": "OFE0grJq",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 2.00mm nozzle",
-    "FELIX Food Double 2.00mm nozzle",
-    "FELIX Food Switch 2.00mm nozzle"
-  ],
-  "filament_diameter": [
-    "31.22"
-  ],
-  "filament_flow_ratio": [
-    "1.1"
-  ],
-  "filament_retraction_length": [
-    "0.75"
-  ],
-  "filament_retract_restart_extra": [
-    "0.0"
-  ],
-  "filament_retraction_speed": [
-    "5.0"
-  ],
-  "filament_deretraction_speed": [
-    "5.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "1.5"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "3.0"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "162.0"
-  ]
-}
@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Thin Plastic  Syringe  @3.00mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "3tmuEN4OqGeBI19I",
-  "filament_id": "OFE0grJq",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 3.00mm nozzle",
-    "FELIX Food Double 3.00mm nozzle",
-    "FELIX Food Switch 3.00mm nozzle"
-  ],
-  "filament_diameter": [
-    "31.22"
-  ],
-  "filament_flow_ratio": [
-    "1.1"
-  ],
-  "filament_retraction_length": [
-    "0.75"
-  ],
-  "filament_retract_restart_extra": [
-    "0.0"
-  ],
-  "filament_retraction_speed": [
-    "5.0"
-  ],
-  "filament_deretraction_speed": [
-    "5.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "1.5"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "4.5"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "324.0"
-  ]
-}
@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Thin Plastic  Syringe  @4.00mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "0Ec86Sjnmy3absBs",
-  "filament_id": "OFE0grJq",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 4.00mm nozzle",
-    "FELIX Food Double 4.00mm nozzle",
-    "FELIX Food Switch 4.00mm nozzle"
-  ],
-  "filament_diameter": [
-    "31.22"
-  ],
-  "filament_flow_ratio": [
-    "1.1"
-  ],
-  "filament_retraction_length": [
-    "0.75"
-  ],
-  "filament_retract_restart_extra": [
-    "0.0"
-  ],
-  "filament_retraction_speed": [
-    "5.0"
-  ],
-  "filament_deretraction_speed": [
-    "5.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "1.5"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "6.0"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "648.0"
-  ]
-}
@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Thin Stainless Steel  Syringe  @0.50mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "02RBUoG5wlnS7QpG",
-  "filament_id": "OFKLDj2M",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 0.50mm nozzle",
-    "FELIX Food Double 0.50mm nozzle",
-    "FELIX Food Switch 0.50mm nozzle"
-  ],
-  "filament_diameter": [
-    "25.4"
-  ],
-  "filament_flow_ratio": [
-    "1.1"
-  ],
-  "filament_retraction_length": [
-    "0.2"
-  ],
-  "filament_retract_restart_extra": [
-    "0.0"
-  ],
-  "filament_retraction_speed": [
-    "10.0"
-  ],
-  "filament_deretraction_speed": [
-    "10.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "0.4"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "0.75"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "10.8"
-  ]
-}
@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Thin Stainless Steel  Syringe  @1.00mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "s9UK5dyo3oJICwZf",
-  "filament_id": "OFKLDj2M",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 1.00mm nozzle",
-    "FELIX Food Double 1.00mm nozzle",
-    "FELIX Food Switch 1.00mm nozzle"
-  ],
-  "filament_diameter": [
-    "25.4"
-  ],
-  "filament_flow_ratio": [
-    "1.1"
-  ],
-  "filament_retraction_length": [
-    "0.2"
-  ],
-  "filament_retract_restart_extra": [
-    "0.0"
-  ],
-  "filament_retraction_speed": [
-    "10.0"
-  ],
-  "filament_deretraction_speed": [
-    "10.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "0.4"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "1.5"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "40.5"
-  ]
-}
@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Thin Stainless Steel  Syringe  @2.00mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "vYKSM2VM9UHzprt9",
-  "filament_id": "OFKLDj2M",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 2.00mm nozzle",
-    "FELIX Food Double 2.00mm nozzle",
-    "FELIX Food Switch 2.00mm nozzle"
-  ],
-  "filament_diameter": [
-    "25.4"
-  ],
-  "filament_flow_ratio": [
-    "1.1"
-  ],
-  "filament_retraction_length": [
-    "0.2"
-  ],
-  "filament_retract_restart_extra": [
-    "0.0"
-  ],
-  "filament_retraction_speed": [
-    "10.0"
-  ],
-  "filament_deretraction_speed": [
-    "10.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "0.4"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "3.0"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "162.0"
-  ]
-}
@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Thin Stainless Steel  Syringe  @3.00mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "KdNZLCIGmKJYexFg",
-  "filament_id": "OFKLDj2M",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 3.00mm nozzle",
-    "FELIX Food Double 3.00mm nozzle",
-    "FELIX Food Switch 3.00mm nozzle"
-  ],
-  "filament_diameter": [
-    "25.4"
-  ],
-  "filament_flow_ratio": [
-    "1.1"
-  ],
-  "filament_retraction_length": [
-    "0.2"
-  ],
-  "filament_retract_restart_extra": [
-    "0.0"
-  ],
-  "filament_retraction_speed": [
-    "10.0"
-  ],
-  "filament_deretraction_speed": [
-    "10.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "0.4"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "4.5"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "324.0"
-  ]
-}
@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Thin Stainless Steel  Syringe  @4.00mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "j9iWTrl4kYZfHjWW",
-  "filament_id": "OFKLDj2M",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 4.00mm nozzle",
-    "FELIX Food Double 4.00mm nozzle",
-    "FELIX Food Switch 4.00mm nozzle"
-  ],
-  "filament_diameter": [
-    "25.4"
-  ],
-  "filament_flow_ratio": [
-    "1.1"
-  ],
-  "filament_retraction_length": [
-    "0.2"
-  ],
-  "filament_retract_restart_extra": [
-    "0.0"
-  ],
-  "filament_retraction_speed": [
-    "10.0"
-  ],
-  "filament_deretraction_speed": [
-    "10.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "0.4"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "6.0"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "648.0"
-  ]
-}
@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Very Thick Stainless Steel  Syringe  @1.00mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "n0IMp9AxOpjpCHxP",
-  "filament_id": "OFm5jtRu",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 1.00mm nozzle",
-    "FELIX Food Double 1.00mm nozzle",
-    "FELIX Food Switch 1.00mm nozzle"
-  ],
-  "filament_diameter": [
-    "25.4"
-  ],
-  "filament_flow_ratio": [
-    "1.0"
-  ],
-  "filament_retraction_length": [
-    "2.0"
-  ],
-  "filament_retract_restart_extra": [
-    "0.0"
-  ],
-  "filament_retraction_speed": [
-    "5.0"
-  ],
-  "filament_deretraction_speed": [
-    "5.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "4.0"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "0.75"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "13.5"
-  ]
-}
@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Very Thick Stainless Steel  Syringe  @2.00mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "Mm7YAezpHqJuoQiE",
-  "filament_id": "OFm5jtRu",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 2.00mm nozzle",
-    "FELIX Food Double 2.00mm nozzle",
-    "FELIX Food Switch 2.00mm nozzle"
-  ],
-  "filament_diameter": [
-    "25.4"
-  ],
-  "filament_flow_ratio": [
-    "1.0"
-  ],
-  "filament_retraction_length": [
-    "2.0"
-  ],
-  "filament_retract_restart_extra": [
-    "0.0"
-  ],
-  "filament_retraction_speed": [
-    "5.0"
-  ],
-  "filament_deretraction_speed": [
-    "5.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "4.0"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "1.5"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "53.0"
-  ]
-}
@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Very Thick Stainless Steel  Syringe  @3.00mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "0ySXw7PXNvxrGBPG",
-  "filament_id": "OFm5jtRu",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 3.00mm nozzle",
-    "FELIX Food Double 3.00mm nozzle",
-    "FELIX Food Switch 3.00mm nozzle"
-  ],
-  "filament_diameter": [
-    "25.4"
-  ],
-  "filament_flow_ratio": [
-    "1.0"
-  ],
-  "filament_retraction_length": [
-    "2.0"
-  ],
-  "filament_retract_restart_extra": [
-    "0.0"
-  ],
-  "filament_retraction_speed": [
-    "5.0"
-  ],
-  "filament_deretraction_speed": [
-    "5.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "4.0"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "3.0"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "108.0"
-  ]
-}
@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Very Thick Stainless Steel  Syringe  @4.00mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "bSBqhGh8BL7FFJgx",
-  "filament_id": "OFm5jtRu",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 4.00mm nozzle",
-    "FELIX Food Double 4.00mm nozzle",
-    "FELIX Food Switch 4.00mm nozzle"
-  ],
-  "filament_diameter": [
-    "25.4"
-  ],
-  "filament_flow_ratio": [
-    "1.0"
-  ],
-  "filament_retraction_length": [
-    "2.0"
-  ],
-  "filament_retract_restart_extra": [
-    "0.0"
-  ],
-  "filament_retraction_speed": [
-    "5.0"
-  ],
-  "filament_deretraction_speed": [
-    "5.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "4.0"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "4.5"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "216.0"
-  ]
-}
@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Very Thin Plastic  Syringe  @0.50mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "ACTaCnlbjTyufNFV",
-  "filament_id": "OFzTKnYA",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 0.50mm nozzle",
-    "FELIX Food Double 0.50mm nozzle",
-    "FELIX Food Switch 0.50mm nozzle"
-  ],
-  "filament_diameter": [
-    "31.22"
-  ],
-  "filament_flow_ratio": [
-    "1.0"
-  ],
-  "filament_retraction_length": [
-    "0.5"
-  ],
-  "filament_retract_restart_extra": [
-    "0.03"
-  ],
-  "filament_retraction_speed": [
-    "5.0"
-  ],
-  "filament_deretraction_speed": [
-    "5.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "1.0"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "0.75"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "14.4"
-  ]
-}
@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Very Thin Plastic  Syringe  @1.00mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "ofUu8c6sC0VJb3qu",
-  "filament_id": "OFzTKnYA",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 1.00mm nozzle",
-    "FELIX Food Double 1.00mm nozzle",
-    "FELIX Food Switch 1.00mm nozzle"
-  ],
-  "filament_diameter": [
-    "31.22"
-  ],
-  "filament_flow_ratio": [
-    "1.0"
-  ],
-  "filament_retraction_length": [
-    "0.5"
-  ],
-  "filament_retract_restart_extra": [
-    "0.03"
-  ],
-  "filament_retraction_speed": [
-    "5.0"
-  ],
-  "filament_deretraction_speed": [
-    "5.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "1.0"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "1.5"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "54.0"
-  ]
-}
@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Very Thin Plastic  Syringe  @2.00mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "sEupyUs2hRB9LJZ1",
-  "filament_id": "OFzTKnYA",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 2.00mm nozzle",
-    "FELIX Food Double 2.00mm nozzle",
-    "FELIX Food Switch 2.00mm nozzle"
-  ],
-  "filament_diameter": [
-    "31.22"
-  ],
-  "filament_flow_ratio": [
-    "1.0"
-  ],
-  "filament_retraction_length": [
-    "0.5"
-  ],
-  "filament_retract_restart_extra": [
-    "0.03"
-  ],
-  "filament_retraction_speed": [
-    "5.0"
-  ],
-  "filament_deretraction_speed": [
-    "5.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "1.0"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "3.0"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "218.0"
-  ]
-}
@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Very Thin Plastic  Syringe  @3.00mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "GJyH9ISUP8aoNzQp",
-  "filament_id": "OFzTKnYA",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 3.00mm nozzle",
-    "FELIX Food Double 3.00mm nozzle",
-    "FELIX Food Switch 3.00mm nozzle"
-  ],
-  "filament_diameter": [
-    "31.22"
-  ],
-  "filament_flow_ratio": [
-    "1.0"
-  ],
-  "filament_retraction_length": [
-    "0.5"
-  ],
-  "filament_retract_restart_extra": [
-    "0.03"
-  ],
-  "filament_retraction_speed": [
-    "5.0"
-  ],
-  "filament_deretraction_speed": [
-    "5.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "1.0"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "4.5"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "432.0"
-  ]
-}
@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Very Thin Plastic  Syringe  @4.00mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "dqsklTlJ5R6z47wg",
-  "filament_id": "OFzTKnYA",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 4.00mm nozzle",
-    "FELIX Food Double 4.00mm nozzle",
-    "FELIX Food Switch 4.00mm nozzle"
-  ],
-  "filament_diameter": [
-    "31.22"
-  ],
-  "filament_flow_ratio": [
-    "1.0"
-  ],
-  "filament_retraction_length": [
-    "0.5"
-  ],
-  "filament_retract_restart_extra": [
-    "0.03"
-  ],
-  "filament_retraction_speed": [
-    "5.0"
-  ],
-  "filament_deretraction_speed": [
-    "5.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "1.0"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.0"
-  ],
-  "filament_wipe_distance": [
-    "6.0"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "864.0"
-  ]
-}
@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Very Thin Stainless Steel  Syringe  @0.50mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "08AJJWkrbhAo421K",
-  "filament_id": "OFJDz9xO",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 0.50mm nozzle",
-    "FELIX Food Double 0.50mm nozzle",
-    "FELIX Food Switch 0.50mm nozzle"
-  ],
-  "filament_diameter": [
-    "25.4"
-  ],
-  "filament_flow_ratio": [
-    "0.96"
-  ],
-  "filament_retraction_length": [
-    "0.1"
-  ],
-  "filament_retract_restart_extra": [
-    "0.03"
-  ],
-  "filament_retraction_speed": [
-    "5.0"
-  ],
-  "filament_deretraction_speed": [
-    "5.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "0.2"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.03"
-  ],
-  "filament_wipe_distance": [
-    "0.75"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "14.4"
-  ]
-}
@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Very Thin Stainless Steel  Syringe  @1.00mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "ZGtJ5dq6QEFrRzER",
-  "filament_id": "OFJDz9xO",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 1.00mm nozzle",
-    "FELIX Food Double 1.00mm nozzle",
-    "FELIX Food Switch 1.00mm nozzle"
-  ],
-  "filament_diameter": [
-    "25.4"
-  ],
-  "filament_flow_ratio": [
-    "0.96"
-  ],
-  "filament_retraction_length": [
-    "0.1"
-  ],
-  "filament_retract_restart_extra": [
-    "0.03"
-  ],
-  "filament_retraction_speed": [
-    "5.0"
-  ],
-  "filament_deretraction_speed": [
-    "5.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "0.2"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.03"
-  ],
-  "filament_wipe_distance": [
-    "1.5"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "54.0"
-  ]
-}
@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Very Thin Stainless Steel  Syringe  @2.00mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "il7EvApOb39ReoAt",
-  "filament_id": "OFJDz9xO",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 2.00mm nozzle",
-    "FELIX Food Double 2.00mm nozzle",
-    "FELIX Food Switch 2.00mm nozzle"
-  ],
-  "filament_diameter": [
-    "25.4"
-  ],
-  "filament_flow_ratio": [
-    "0.96"
-  ],
-  "filament_retraction_length": [
-    "0.1"
-  ],
-  "filament_retract_restart_extra": [
-    "0.03"
-  ],
-  "filament_retraction_speed": [
-    "5.0"
-  ],
-  "filament_deretraction_speed": [
-    "5.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "0.2"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.03"
-  ],
-  "filament_wipe_distance": [
-    "3.0"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "216.0"
-  ]
-}
@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Very Thin Stainless Steel  Syringe  @3.00mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "yTSl3aV0S2HD6zPy",
-  "filament_id": "OFJDz9xO",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 3.00mm nozzle",
-    "FELIX Food Double 3.00mm nozzle",
-    "FELIX Food Switch 3.00mm nozzle"
-  ],
-  "filament_diameter": [
-    "25.4"
-  ],
-  "filament_flow_ratio": [
-    "0.96"
-  ],
-  "filament_retraction_length": [
-    "0.1"
-  ],
-  "filament_retract_restart_extra": [
-    "0.03"
-  ],
-  "filament_retraction_speed": [
-    "5.0"
-  ],
-  "filament_deretraction_speed": [
-    "5.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "0.2"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.03"
-  ],
-  "filament_wipe_distance": [
-    "4.5"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "432.0"
-  ]
-}
@@ -1,47 +0,0 @@
-{
-  "type": "filament",
-  "name": "Food Very Thin Stainless Steel  Syringe  @4.00mm",
-  "inherits": "fdm_filament_food",
-  "from": "system",
-  "setting_id": "JfnwH4HjP0CQKuyr",
-  "filament_id": "OFJDz9xO",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Food Single 4.00mm nozzle",
-    "FELIX Food Double 4.00mm nozzle",
-    "FELIX Food Switch 4.00mm nozzle"
-  ],
-  "filament_diameter": [
-    "25.4"
-  ],
-  "filament_flow_ratio": [
-    "0.96"
-  ],
-  "filament_retraction_length": [
-    "0.1"
-  ],
-  "filament_retract_restart_extra": [
-    "0.03"
-  ],
-  "filament_retraction_speed": [
-    "5.0"
-  ],
-  "filament_deretraction_speed": [
-    "5.0"
-  ],
-  "filament_retract_length_toolchange": [
-    "0.2"
-  ],
-  "filament_retract_restart_extra_toolchange": [
-    "0.03"
-  ],
-  "filament_wipe_distance": [
-    "6.0"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ],
-  "filament_max_volumetric_speed": [
-    "864.0"
-  ]
-}
@@ -1,81 +0,0 @@
-{
-  "type": "filament",
-  "name": "FELIX FLEX  Brass @ 0.35mm",
-  "inherits": "fdm_filament_flex",
-  "from": "system",
-  "setting_id": "UXX0sEaoqZvdXwi6",
-  "filament_id": "OFF6vK3j",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Pro 3 0.35mm nozzle",
-    "FELIX Pro L 3.0 0.35mm nozzle",
-    "FELIX Pro XL 3.0 0.35mm nozzle",
-    "FELIX Tec 4 0.35mm nozzle"
-  ],
-  "nozzle_temperature": [
-    "215.0"
-  ],
-  "nozzle_temperature_initial_layer": [
-    "215.0"
-  ],
-  "hot_plate_temp": [
-    "40.0"
-  ],
-  "hot_plate_temp_initial_layer": [
-    "40.0"
-  ],
-  "cool_plate_temp": [
-    "40.0"
-  ],
-  "cool_plate_temp_initial_layer": [
-    "40.0"
-  ],
-  "eng_plate_temp": [
-    "40.0"
-  ],
-  "eng_plate_temp_initial_layer": [
-    "40.0"
-  ],
-  "textured_plate_temp": [
-    "40.0"
-  ],
-  "textured_plate_temp_initial_layer": [
-    "40.0"
-  ],
-  "chamber_temperature": [
-    "28.0"
-  ],
-  "idle_temperature": [
-    "120"
-  ],
-  "filament_retract_length": [
-    "2.2"
-  ],
-  "filament_retract_speed": [
-    "50.0"
-  ],
-  "filament_retraction_speed": [
-    "50.0"
-  ],
-  "filament_retract_restart_extra": [
-    "0.05"
-  ],
-  "filament_flow_ratio": [
-    "1.0"
-  ],
-  "filament_max_volumetric_speed": [
-    "12.0"
-  ],
-  "fan_min_speed": [
-    "60.0"
-  ],
-  "fan_max_speed": [
-    "60.0"
-  ],
-  "filament_density": [
-    "1.38"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ]
-}
@@ -1,81 +0,0 @@
-{
-  "type": "filament",
-  "name": "FELIX FLEX  Brass @ 0.50mm",
-  "inherits": "fdm_filament_flex",
-  "from": "system",
-  "setting_id": "B4AmHHxdvhsjN34a",
-  "filament_id": "OFF6vK3j",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Pro 3 0.50mm nozzle",
-    "FELIX Pro L 3.0 0.50mm nozzle",
-    "FELIX Pro XL 3.0 0.50mm nozzle",
-    "FELIX Tec 4 0.50mm nozzle"
-  ],
-  "nozzle_temperature": [
-    "215.0"
-  ],
-  "nozzle_temperature_initial_layer": [
-    "215.0"
-  ],
-  "hot_plate_temp": [
-    "40.0"
-  ],
-  "hot_plate_temp_initial_layer": [
-    "40.0"
-  ],
-  "cool_plate_temp": [
-    "40.0"
-  ],
-  "cool_plate_temp_initial_layer": [
-    "40.0"
-  ],
-  "eng_plate_temp": [
-    "40.0"
-  ],
-  "eng_plate_temp_initial_layer": [
-    "40.0"
-  ],
-  "textured_plate_temp": [
-    "40.0"
-  ],
-  "textured_plate_temp_initial_layer": [
-    "40.0"
-  ],
-  "chamber_temperature": [
-    "28.0"
-  ],
-  "idle_temperature": [
-    "120"
-  ],
-  "filament_retract_length": [
-    "2.2"
-  ],
-  "filament_retract_speed": [
-    "50.0"
-  ],
-  "filament_retraction_speed": [
-    "50.0"
-  ],
-  "filament_retract_restart_extra": [
-    "0.05"
-  ],
-  "filament_flow_ratio": [
-    "1.0"
-  ],
-  "filament_max_volumetric_speed": [
-    "12.0"
-  ],
-  "fan_min_speed": [
-    "60.0"
-  ],
-  "fan_max_speed": [
-    "60.0"
-  ],
-  "filament_density": [
-    "1.38"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ]
-}
@@ -1,81 +0,0 @@
-{
-  "type": "filament",
-  "name": "FELIX FLEX Hardened Steel @ 0.25mm",
-  "inherits": "fdm_filament_flex",
-  "from": "system",
-  "setting_id": "7z6rkaF5DBbiccZP",
-  "filament_id": "OFSOY4F3",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Pro 3 0.25mm nozzle",
-    "FELIX Pro L 3.0 0.25mm nozzle",
-    "FELIX Pro XL 3.0 0.25mm nozzle",
-    "FELIX Tec 4 0.25mm nozzle"
-  ],
-  "nozzle_temperature": [
-    "225.0"
-  ],
-  "nozzle_temperature_initial_layer": [
-    "225.0"
-  ],
-  "hot_plate_temp": [
-    "40.0"
-  ],
-  "hot_plate_temp_initial_layer": [
-    "40.0"
-  ],
-  "cool_plate_temp": [
-    "40.0"
-  ],
-  "cool_plate_temp_initial_layer": [
-    "40.0"
-  ],
-  "eng_plate_temp": [
-    "40.0"
-  ],
-  "eng_plate_temp_initial_layer": [
-    "40.0"
-  ],
-  "textured_plate_temp": [
-    "40.0"
-  ],
-  "textured_plate_temp_initial_layer": [
-    "40.0"
-  ],
-  "chamber_temperature": [
-    "28.0"
-  ],
-  "idle_temperature": [
-    "120"
-  ],
-  "filament_retract_length": [
-    "2.2"
-  ],
-  "filament_retract_speed": [
-    "50.0"
-  ],
-  "filament_retraction_speed": [
-    "50.0"
-  ],
-  "filament_retract_restart_extra": [
-    "0.05"
-  ],
-  "filament_flow_ratio": [
-    "1.0"
-  ],
-  "filament_max_volumetric_speed": [
-    "12.0"
-  ],
-  "fan_min_speed": [
-    "60.0"
-  ],
-  "fan_max_speed": [
-    "60.0"
-  ],
-  "filament_density": [
-    "1.38"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ]
-}
@@ -1,81 +0,0 @@
-{
-  "type": "filament",
-  "name": "FELIX FLEX Hardened Steel @ 0.35mm",
-  "inherits": "fdm_filament_flex",
-  "from": "system",
-  "setting_id": "DJRiMo6Aq0BvhFC9",
-  "filament_id": "OFSOY4F3",
-  "instantiation": "true",
-  "compatible_printers": [
-    "FELIX Pro 3 0.35mm nozzle",
-    "FELIX Pro L 3.0 0.35mm nozzle",
-    "FELIX Pro XL 3.0 0.35mm nozzle",
-    "FELIX Tec 4 0.35mm nozzle"
-  ],
-  "nozzle_temperature": [
-    "225.0"
-  ],
-  "nozzle_temperature_initial_layer": [
-    "225.0"
-  ],
-  "hot_plate_temp": [
-    "40.0"
-  ],
-  "hot_plate_temp_initial_layer": [
-    "40.0"
-  ],
-  "cool_plate_temp": [
-    "40.0"
-  ],
-  "cool_plate_temp_initial_layer": [
-    "40.0"
-  ],
-  "eng_plate_temp": [
-    "40.0"
-  ],
-  "eng_plate_temp_initial_layer": [
-    "40.0"
-  ],
-  "textured_plate_temp": [
-    "40.0"
-  ],
-  "textured_plate_temp_initial_layer": [
-    "40.0"
-  ],
-  "chamber_temperature": [
-    "28.0"
-  ],
-  "idle_temperature": [
-    "120"
-  ],
-  "filament_retract_length": [
-    "2.2"
-  ],
-  "filament_retract_speed": [
-    "50.0"
-  ],
-  "filament_retraction_speed": [
-    "50.0"
-  ],
-  "filament_retract_restart_extra": [
-    "0.05"
-  ],
-  "filament_flow_ratio": [
-    "1.0"
-  ],
-  "filament_max_volumetric_speed": [
-    "12.0"
-  ],
-  "fan_min_speed": [
-    "60.0"
-  ],
-  "fan_max_speed": [
-    "60.0"
-  ],
-  "filament_density": [
-    "1.38"
-  ],
-  "filament_vendor": [
-    "FELIX Printers"
-  ]
-}
--- a/Show More
+++ b/Show More
				`@@ -0,0 +1 @@`
				`<svg xmlns="http://www.w3.org/2000/svg" width="25" height="25" viewBox="0 0 25 25"><circle cx="9.5" cy="12.5" r="9.5" style="fill:#33aba1"/><path d="M6.5,10.5a3,3,0,0,1,6,0c0,3-3,2-3,4v1" style="fill:none;stroke:#e6e6e6;stroke-linecap:round;stroke-linejoin:round"/><rect x="9" y="17" width="1" height="1" style="fill:#e6e6e6"/></svg>`
				`@@ -1 +0,0 @@`
				`<?xml version="1.0" encoding="UTF-8"?><svg id="a" xmlns="http://www.w3.org/2000/svg" viewBox="0 0 15 15"><path d="M12.31,8l-8.14,4.16c-.31.16-.67-.07-.67-.41V3.27c0-.35.37-.57.68-.41l8.14,4.32c.33.17.33.65,0,.82Z" style="fill:none; stroke:#fefefe; stroke-linecap:round; stroke-linejoin:round;"/></svg>`
				`@@ -1 +0,0 @@`
				<?xml version="1.0" encoding="UTF-8"?><svg id="a" xmlns="http://www.w3.org/2000/svg" viewBox="0 0 15 15"><path d="M7.5,3.5c2-2,5.1-1,6-1" style="fill:none; stroke:#fefefe; stroke-linecap:round; stroke-linejoin:round;"/><path d="M7.5,12.5c2-2,5.1-1,6-1" style="fill:none; stroke:#fefefe; stroke-linecap:round; stroke-linejoin:round;"/><path d="M7.5,3.5C5.5,1.5,2.4,2.5,1.5,2.5" style="fill:none; stroke:#fefefe; stroke-linecap:round; stroke-linejoin:round;"/><path d="M7.5,12.5c-2-2-5.1-1-6-1" style="fill:none; stroke:#fefefe; stroke-linecap:round; stroke-linejoin:round;"/><line x1="13.5" y1="11.5" x2="13.5" y2="2.5" style="fill:none; stroke:#fefefe; stroke-linecap:round; stroke-linejoin:round;"/><line x1="7.5" y1="12.5" x2="7.5" y2="3.5" style="fill:none; stroke:#fefefe; stroke-linecap:round; stroke-linejoin:round;"/><line x1="1.5" y1="11.5" x2="1.5" y2="2.5" style="fill:none; stroke:#fefefe; stroke-linecap:round; stroke-linejoin:round;"/></svg>