Update Belt-Printer Branch (#15087)

gets belt-printer on top of upstream again.

resources/calib/temperature_tower/gen_belt_temp_tower.py

@@ -0,0 +1,79 @@
+#!/usr/bin/env python3
+"""Belt temperature-tower asset generator (discrete-provini design).
+
+A vertical temperature tower cannot be sliced on a belt printer, so lay a row of
+DISCRETE provini (one per temperature) along the belt (designed Y) with a fixed
+surface gap. Each provino is the chevron+arc unit (belt_temp_provino_unit.stl,
+keel-first); its temperature is ENGRAVED upright into the 50 mm face — a raised
+number would be an unsupported overhang on the belt. The C++ calib_temp belt branch
+(Plater.cpp) injects one M104 per zone 70 layers INTO provino i:
+  print_z[i] = i * PITCH * cos(theta) + 70 * layer_height   (theta = 45)
+inside the body, not in the empty inter-provino gap (which has no sliced layers for
+the event to attach to). PITCH below is the shared geometry contract with that code —
+keep them in sync.
+
+Generates one STL per filament temp range used by Temp_Calibration_Dlg.
+"""
+import numpy as np, trimesh, os
+from matplotlib.textpath import TextPath
+from matplotlib.font_manager import FontProperties
+from shapely.geometry import Polygon as ShPoly
+from shapely.ops import unary_union
+
+HERE = os.path.dirname(os.path.abspath(__file__))
+UNIT = os.path.join(HERE, 'belt_temp_provino_unit.stl')   # single provino, keel-first
+SURF_GAP = 25.0            # surface-to-surface gap between provini (mm) — user spec
+TEXT_H = 9.0
+TEXT_DEPTH = 0.8           # engraving depth (numbers are CUT into the face, not raised:
+                          # a raised number is an unsupported Y-overhang on the belt)
+TEXT_OVERSHOOT = 0.6       # extra height poking out of the face for a clean boolean cut
+
+# Temperature ranges (start, end) per filament family, 5 C step. File name encodes them.
+RANGES = [(230,190),(270,230),(250,230),(280,240),(240,210),(320,280)]
+
+unit = trimesh.load(UNIT)
+dY = unit.bounds[1,1] - unit.bounds[0,1]
+PITCH = dY + SURF_GAP                       # designed-Y pitch == C++ contract constant
+print(f"unit dY={dY:.2f}  PITCH={PITCH:.3f}  (C++ contract: print_z[i]=i*{PITCH:.3f}*cos45)")
+
+# 50 mm face normal (0,-1,1)/sqrt2 ; UPRIGHT basis u=+X det(+1) (verified non-mirrored)
+n = np.array([0,-1,1.])/np.sqrt(2)
+u = np.array([1,0,0.]); v = np.array([0,1,1.])/np.sqrt(2)
+R = np.column_stack([u,v,n])
+fn = unit.face_normals; fc = unit.triangles_center; fa = unit.area_faces
+sel = (fn@n) > 0.9
+face_c = (fc[sel]*fa[sel,None]).sum(0)/fa[sel].sum()
+
+def text_mesh(s):
+    tp = TextPath((0,0), s, size=TEXT_H, prop=FontProperties(family='DejaVu Sans'))
+    rings = [ShPoly(p) for p in tp.to_polygons() if len(p)>=3]
+    rings.sort(key=lambda r:r.area, reverse=True)
+    used=[False]*len(rings); parts=[]
+    for i,o in enumerate(rings):
+        if used[i]: continue
+        holes=[]
+        for j in range(i+1,len(rings)):
+            if not used[j] and o.contains(rings[j]): holes.append(rings[j].exterior.coords); used[j]=True
+        parts.append(ShPoly(o.exterior.coords,holes)); used[i]=True
+    poly = unary_union(parts)
+    geoms = list(poly.geoms) if poly.geom_type=='MultiPolygon' else [poly]
+    m = trimesh.util.concatenate([trimesh.creation.extrude_polygon(g,height=TEXT_DEPTH+TEXT_OVERSHOOT) for g in geoms])
+    c = m.bounds.mean(axis=0); m.apply_translation([-c[0],-c[1],0]); return m
+
+for t_start, t_end in RANGES:
+    temps = list(range(t_start, t_end-1, -5))
+    parts=[]
+    for i,T in enumerate(temps):
+        c = unit.copy(); c.apply_translation([0, i*PITCH, 0])
+        t = text_mesh(str(T)); M=np.eye(4); M[:3,:3]=R; t.apply_transform(M)
+        # place the text spanning from TEXT_DEPTH inside the face to TEXT_OVERSHOOT outside,
+        # then CUT it out of the provino (engrave) — no raised material, no Y-overhang.
+        t.apply_translation(face_c - n*TEXT_DEPTH + np.array([0,i*PITCH,0]))
+        c = trimesh.boolean.difference([c, t], engine='manifold')
+        parts.append(c)
+    asset = trimesh.util.concatenate(parts)
+    out = os.path.join(HERE, f"belt_temp_tower_{t_start}_{t_end}.stl")
+    asset.export(out)
+    dims = np.round(asset.bounds[1]-asset.bounds[0],1)
+    wt = all(p.is_watertight for p in parts)
+    print(f"  {t_start}->{t_end}: {len(temps)} zones  bbox={dims}  watertight={wt}  -> {os.path.basename(out)}")

resources/profiles/Custom.json

@@ -4,6 +4,10 @@
 	"force_update": "0",
 	"description": "My configurations",
 	"machine_model_list": [
+		{
+			"name": "Generic Belt Printer",
+			"sub_path": "machine/MyBeltPrinter.json"
+		},
 		{
 			"name": "Generic Klipper Printer",
 			"sub_path": "machine/MyKlipper.json"
@@ -262,18 +266,38 @@
 			"name": "MyKlipper 0.8 nozzle",
 			"sub_path": "machine/MyKlipper 0.8 nozzle.json"
 		},
+		{
+			"name": "fdm_belt_common",
+			"sub_path": "machine/fdm_belt_common.json"
+		},
 		{
 			"name": "fdm_toolchanger_common",
 			"sub_path": "machine/fdm_toolchanger_common.json"
 		},
-		{
-			"name": "MyRepetier 0.4 nozzle",
-			"sub_path": "machine/MyRepetier 0.4 nozzle.json"
-		},
 		{
 			"name": "MyRRF 0.4 nozzle",
 			"sub_path": "machine/MyRRF 0.4 nozzle.json"
 		},
+		{
+			"name": "MyBeltPrinter 0.2 nozzle",
+			"sub_path": "machine/MyBeltPrinter 0.2 nozzle.json"
+		},
+		{
+			"name": "MyBeltPrinter 0.4 nozzle",
+			"sub_path": "machine/MyBeltPrinter 0.4 nozzle.json"
+		},
+		{
+			"name": "MyBeltPrinter 0.6 nozzle",
+			"sub_path": "machine/MyBeltPrinter 0.6 nozzle.json"
+		},
+		{
+			"name": "MyBeltPrinter 0.8 nozzle",
+			"sub_path": "machine/MyBeltPrinter 0.8 nozzle.json"
+		},
+		{
+			"name": "MyRepetier 0.4 nozzle",
+			"sub_path": "machine/MyRepetier 0.4 nozzle.json"
+		},
 		{
 			"name": "MyToolChanger 0.2 nozzle",
 			"sub_path": "machine/MyToolChanger 0.2 nozzle.json"

resources/profiles/Custom/filament/Generic ABS @MyToolChanger.json

@@ -24,6 +24,12 @@
 	"filament_loading_speed_start": [
 		"50"
 	],
+	"filament_multitool_ramming": [
+		"1"
+	],
+	"filament_multitool_ramming_flow": [
+		"40"
+	],
 	"filament_stamping_distance": [
 		"45"
 	],

resources/profiles/Custom/filament/Generic ASA @MyToolChanger.json

@@ -24,6 +24,12 @@
 	"filament_loading_speed_start": [
 		"50"
 	],
+	"filament_multitool_ramming": [
+		"1"
+	],
+	"filament_multitool_ramming_flow": [
+		"40"
+	],
 	"filament_stamping_distance": [
 		"45"
 	],

resources/profiles/Custom/filament/Generic PA @MyToolChanger.json

@@ -24,6 +24,12 @@
 	"filament_loading_speed_start": [
 		"50"
 	],
+	"filament_multitool_ramming": [
+		"1"
+	],
+	"filament_multitool_ramming_flow": [
+		"40"
+	],
 	"filament_stamping_distance": [
 		"45"
 	],

resources/profiles/Custom/filament/Generic PA-CF @MyToolChanger.json

@@ -24,6 +24,12 @@
 	"filament_loading_speed_start": [
 		"50"
 	],
+	"filament_multitool_ramming": [
+		"1"
+	],
+	"filament_multitool_ramming_flow": [
+		"40"
+	],
 	"filament_stamping_distance": [
 		"45"
 	],

resources/profiles/Custom/filament/Generic PC @MyToolChanger.json

@@ -25,6 +25,12 @@
 	"filament_loading_speed_start": [
 		"50"
 	],
+	"filament_multitool_ramming": [
+		"1"
+	],
+	"filament_multitool_ramming_flow": [
+		"40"
+	],
 	"filament_stamping_distance": [
 		"45"
 	],

resources/profiles/Custom/filament/Generic PETG @MyToolChanger.json

@@ -25,6 +25,12 @@
 	"filament_loading_speed_start": [
 		"50"
 	],
+	"filament_multitool_ramming": [
+		"1"
+	],
+	"filament_multitool_ramming_flow": [
+		"40"
+	],
 	"filament_stamping_distance": [
 		"45"
 	],

resources/profiles/Custom/filament/Generic PLA @MyToolChanger.json

@@ -25,6 +25,12 @@
 	"filament_loading_speed_start": [
 		"50"
 	],
+	"filament_multitool_ramming": [
+		"1"
+	],
+	"filament_multitool_ramming_flow": [
+		"40"
+	],
 	"filament_stamping_distance": [
 		"45"
 	],

resources/profiles/Custom/filament/Generic PLA-CF @MyToolChanger.json

@@ -25,6 +25,12 @@
 	"filament_loading_speed_start": [
 		"50"
 	],
+	"filament_multitool_ramming": [
+		"1"
+	],
+	"filament_multitool_ramming_flow": [
+		"40"
+	],
 	"filament_stamping_distance": [
 		"45"
 	],

resources/profiles/Custom/filament/Generic PVA @MyToolChanger.json

@@ -25,6 +25,12 @@
 	"filament_loading_speed_start": [
 		"50"
 	],
+	"filament_multitool_ramming": [
+		"1"
+	],
+	"filament_multitool_ramming_flow": [
+		"40"
+	],
 	"filament_stamping_distance": [
 		"45"
 	],

resources/profiles/Custom/machine/MyBeltPrinter 0.2 nozzle.json

@@ -0,0 +1,26 @@
+{
+	"type": "machine",
+	"name": "MyBeltPrinter 0.2 nozzle",
+	"inherits": "fdm_belt_common",
+	"from": "system",
+	"setting_id": "GM_BELT_001",
+	"instantiation": "true",
+	"printer_model": "Generic Belt Printer",
+	"nozzle_diameter": [
+		"0.2"
+	],
+	"max_layer_height": [
+		"0.16"
+	],
+	"min_layer_height": [
+		"0.04"
+	],
+	"printer_variant": "0.2",
+	"printable_area": [
+		"0x0",
+		"350x0",
+		"350x350",
+		"0x350"
+	],
+	"printable_height": "300"
+}

resources/profiles/Custom/machine/MyBeltPrinter 0.4 nozzle.json

@@ -0,0 +1,20 @@
+{
+	"type": "machine",
+	"name": "MyBeltPrinter 0.4 nozzle",
+	"inherits": "fdm_belt_common",
+	"from": "system",
+	"setting_id": "GM_BELT_002",
+	"instantiation": "true",
+	"printer_model": "Generic Belt Printer",
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"printer_variant": "0.4",
+	"printable_area": [
+		"0x0",
+		"350x0",
+		"350x350",
+		"0x350"
+	],
+	"printable_height": "300"
+}

resources/profiles/Custom/machine/MyBeltPrinter 0.6 nozzle.json

@@ -0,0 +1,26 @@
+{
+	"type": "machine",
+	"name": "MyBeltPrinter 0.6 nozzle",
+	"inherits": "fdm_belt_common",
+	"from": "system",
+	"setting_id": "GM_BELT_003",
+	"instantiation": "true",
+	"printer_model": "Generic Belt Printer",
+	"nozzle_diameter": [
+		"0.6"
+	],
+	"max_layer_height": [
+		"0.4"
+	],
+	"min_layer_height": [
+		"0.12"
+	],
+	"printer_variant": "0.6",
+	"printable_area": [
+		"0x0",
+		"350x0",
+		"350x350",
+		"0x350"
+	],
+	"printable_height": "300"
+}

resources/profiles/Custom/machine/MyBeltPrinter 0.8 nozzle.json

@@ -0,0 +1,26 @@
+{
+	"type": "machine",
+	"name": "MyBeltPrinter 0.8 nozzle",
+	"inherits": "fdm_belt_common",
+	"from": "system",
+	"setting_id": "GM_BELT_004",
+	"instantiation": "true",
+	"printer_model": "Generic Belt Printer",
+	"nozzle_diameter": [
+		"0.8"
+	],
+	"max_layer_height": [
+		"0.6"
+	],
+	"min_layer_height": [
+		"0.2"
+	],
+	"printer_variant": "0.8",
+	"printable_area": [
+		"0x0",
+		"350x0",
+		"350x350",
+		"0x350"
+	],
+	"printable_height": "300"
+}

resources/profiles/Custom/machine/MyBeltPrinter.json

@@ -0,0 +1,12 @@
+{
+	"type": "machine_model",
+	"name": "Generic Belt Printer",
+	"model_id": "my_belt_01",
+	"nozzle_diameter": "0.4;0.2;0.6;0.8",
+	"machine_tech": "FFF",
+	"family": "MyPrinter",
+	"bed_model": "Custom_350_bed.stl",
+	"bed_texture": "orcaslicer_bed_texture.svg",
+	"hotend_model": "",
+	"default_materials": "Generic PLA @System;Generic PLA-CF @System;Generic PETG @System;Generic TPU @System;Generic PC @System;Generic PVA @System;Generic PA @System;Generic PA-CF @System"
+}

resources/profiles/Custom/machine/fdm_belt_common.json

@@ -0,0 +1,99 @@
+{
+	"type": "machine",
+	"name": "fdm_belt_common",
+	"inherits": "fdm_klipper_common",
+	"from": "system",
+	"instantiation": "false",
+	"gcode_flavor": "klipper",
+	"single_extruder_multi_material": "0",
+	"default_filament_profile": [
+		"Generic PLA @System"
+	],
+	"default_print_profile": "0.20mm Standard @System",
+	"max_layer_height": [
+		"0.32"
+	],
+	"min_layer_height": [
+		"0.08"
+	],
+	"deretraction_speed": [
+		"30"
+	],
+	"extruder_colour": [
+		"#FCE94F"
+	],
+	"extruder_offset": [
+		"0x0"
+	],
+	"long_retractions_when_cut": [
+		"0"
+	],
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"retract_before_wipe": [
+		"70%"
+	],
+	"retract_length_toolchange": [
+		"2"
+	],
+	"retract_lift_above": [
+		"0"
+	],
+	"retract_lift_below": [
+		"0"
+	],
+	"retract_lift_enforce": [
+		"All Surfaces"
+	],
+	"retract_restart_extra": [
+		"0"
+	],
+	"retract_restart_extra_toolchange": [
+		"0"
+	],
+	"retract_when_changing_layer": [
+		"1"
+	],
+	"retraction_distances_when_cut": [
+		"18"
+	],
+	"retraction_length": [
+		"0.8"
+	],
+	"retraction_minimum_travel": [
+		"1"
+	],
+	"retraction_speed": [
+		"30"
+	],
+	"travel_slope": [
+		"3"
+	],
+	"wipe": [
+		"1"
+	],
+	"wipe_distance": [
+		"1"
+	],
+	"z_hop": [
+		"0.4"
+	],
+	"z_hop_types": [
+		"Normal Lift"
+	],
+	"gcode_remap_x": "rev_x",
+	"gcode_remap_y": "pos_z",
+	"gcode_remap_z": "pos_y",
+	"printer_extruder_id": [
+		"1"
+	],
+	"belt_printer": "1",
+	"belt_slice_rotation": "x",
+	"belt_slice_rotation_angle": "45",
+	"belt_slice_rotation_global": "1",
+	"build_plate_tilt_x": "45",
+	"purge_in_prime_tower": "0",
+	"scan_first_layer": "0",
+	"auxiliary_fan": "0"
+}

resources/profiles/Custom/machine/fdm_klipper_common.json

@@ -116,7 +116,7 @@
 	"deretraction_speed": [
 		"30"
 	],
-	"z_hop_types": "Slope Lift",
+	"z_hop_types": "Normal Lift",
 	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"change_filament_gcode": "",

resources/profiles/Custom/machine/fdm_repetier_common.json

@@ -118,7 +118,7 @@
 	"deretraction_speed": [
 		"30"
 	],
-	"z_hop_types": "Slope Lift",
+	"z_hop_types": "Normal Lift",
 	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"change_filament_gcode": "",

resources/profiles/Custom/machine/fdm_rrf_common.json

@@ -116,7 +116,7 @@
 	"deretraction_speed": [
 		"30"
 	],
-	"z_hop_types": "Slope Lift",
+	"z_hop_types": "Normal Lift",
 	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"change_filament_gcode": "",

resources/profiles/Custom/machine/fdm_toolchanger_common.json

@@ -6,7 +6,6 @@
 	"instantiation": "false",
 	"gcode_flavor": "klipper",
 	"single_extruder_multi_material": "0",
-	"wait_for_temp_on_wipe_tower": "1",
 	"default_filament_profile": [
 		"Generic PLA @MyToolChanger"
 	],
@@ -173,11 +172,11 @@
 		"0.4"
 	],
 	"z_hop_types": [
-		"Slope Lift",
+		"Normal Lift",
-		"Slope Lift",
+		"Normal Lift",
-		"Slope Lift",
+		"Normal Lift",
-		"Slope Lift",
+		"Normal Lift",
-		"Slope Lift"
+		"Normal Lift"
 	],
 	"purge_in_prime_tower": "0",
 	"machine_pause_gcode": "M601",

resources/profiles/IdeaFormer.json

@@ -0,0 +1,54 @@
+{
+    "name": "IdeaFormer",
+    "version": "02.00.00.02",
+    "force_update": "0",
+    "description": "IdeaFormer belt printer configurations",
+    "machine_model_list": [
+        {
+            "name": "IdeaFormer IR3 V2",
+            "sub_path": "machine/IdeaFormer IR3 V2.json"
+        }
+    ],
+    "process_list": [
+        {
+            "name": "fdm_process_common",
+            "sub_path": "process/fdm_process_common.json"
+        },
+        {
+            "name": "0.20mm Standard @IdeaFormer IR3 V2",
+            "sub_path": "process/0.20mm Standard @IdeaFormer IR3 V2.json"
+        }
+    ],
+    "filament_list": [
+        {
+            "name": "Generic PLA @IdeaFormer IR3 V2",
+            "sub_path": "filament/Generic PLA @IdeaFormer IR3 V2.json"
+        },
+        {
+            "name": "eSUN PLA @IdeaFormer IR3 V2",
+            "sub_path": "filament/eSUN PLA @IdeaFormer IR3 V2.json"
+        },
+        {
+            "name": "Generic PETG @IdeaFormer IR3 V2",
+            "sub_path": "filament/Generic PETG @IdeaFormer IR3 V2.json"
+        }
+    ],
+    "machine_list": [
+        {
+            "name": "fdm_machine_common",
+            "sub_path": "machine/fdm_machine_common.json"
+        },
+        {
+            "name": "fdm_klipper_common",
+            "sub_path": "machine/fdm_klipper_common.json"
+        },
+        {
+            "name": "fdm_belt_common",
+            "sub_path": "machine/fdm_belt_common.json"
+        },
+        {
+            "name": "IdeaFormer IR3 V2 0.4 nozzle",
+            "sub_path": "machine/IdeaFormer IR3 V2 0.4 nozzle.json"
+        }
+    ]
+}

resources/profiles/IdeaFormer/filament/Generic PETG @IdeaFormer IR3 V2.json

@@ -0,0 +1,112 @@
+{
+	"type": "filament",
+	"name": "Generic PETG @IdeaFormer IR3 V2",
+	"inherits": "Generic PETG @System",
+	"from": "system",
+	"instantiation": "true",
+	"compatible_printers": [
+		"IdeaFormer IR3 V2 0.4 nozzle"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_settings_id": [
+		"Generic PETG @IdeaFormer IR3 V2"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_density": [
+		"1.27"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_cost": [
+		"25"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"nozzle_temperature": [
+		"240"
+	],
+	"nozzle_temperature_initial_layer": [
+		"245"
+	],
+	"nozzle_temperature_range_low": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"260"
+	],
+	"temperature_vitrification": [
+		"70"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"80"
+	],
+	"cool_plate_temp_initial_layer": [
+		"80"
+	],
+	"textured_plate_temp": [
+		"80"
+	],
+	"textured_plate_temp_initial_layer": [
+		"80"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"overhang_fan_speed": [
+		"80"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"full_fan_speed_layer": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"slow_down_layer_time": [
+		"4"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"filament_retraction_length": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"40"
+	],
+	"filament_deretraction_speed": [
+		"40"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_start_gcode": [
+		"; Generic PETG @IdeaFormer IR3 V2 — belt PETG, bed 80C"
+	]
+}

resources/profiles/IdeaFormer/filament/Generic PLA @IdeaFormer IR3 V2.json

@@ -1,127 +1,112 @@
 {
 	"type": "filament",
+	"name": "Generic PLA @IdeaFormer IR3 V2",
+	"inherits": "Generic PLA @System",
 	"from": "system",
-	"instantiation": "false",
+	"instantiation": "true",
-	"name": "Snapmaker PLA Matte @U1 base2",
+	"compatible_printers": [
-	"filament_id": "141703112701",
+		"IdeaFormer IR3 V2 0.4 nozzle"
-	"filament_end_gcode": [
-		""
-	],
-	"filament_retraction_length": [
-		"nil"
-	],
-	"filament_loading_speed_start": [
-		"35"
-	],
-	"filament_loading_speed": [
-		"35"
-	],
-	"filament_unloading_speed_start": [
-		"35"
-	],
-	"filament_unloading_speed": [
-		"35"
-	],
-	"filament_load_time": [
-		"2"
-	],
-	"filament_unload_time": [
-		"2"
-	],
-	"filament_cooling_moves": [
-		"2"
-	],
-	"filament_cooling_initial_speed": [
-		"35"
-	],
-	"filament_cooling_final_speed": [
-		"60"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"filament_max_volumetric_speed": [
-		"12"
 	],
 	"filament_type": [
 		"PLA"
 	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_settings_id": [
+		"Generic PLA @IdeaFormer IR3 V2"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
 	"filament_density": [
 		"1.24"
 	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
 	"filament_cost": [
 		"20"
 	],
-	"cool_plate_temp": [
+	"filament_max_volumetric_speed": [
-		"60"
+		"12"
 	],
-	"eng_plate_temp": [
+	"nozzle_temperature": [
-		"60"
+		"215"
-	],
-	"hot_plate_temp": [
-		"60"
-	],
-	"textured_plate_temp": [
-		"60"
-	],
-	"cool_plate_temp_initial_layer": [
-		"60"
-	],
-	"eng_plate_temp_initial_layer": [
-		"60"
-	],
-	"hot_plate_temp_initial_layer": [
-		"60"
-	],
-	"textured_plate_temp_initial_layer": [
-		"60"
 	],
 	"nozzle_temperature_initial_layer": [
 		"220"
 	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"nozzle_temperature": [
-		"220"
-	],
-	"temperature_vitrification": [
-		"60"
-	],
 	"nozzle_temperature_range_low": [
 		"190"
 	],
 	"nozzle_temperature_range_high": [
-		"230"
+		"240"
+	],
+	"temperature_vitrification": [
+		"45"
+	],
+	"hot_plate_temp": [
+		"75"
+	],
+	"hot_plate_temp_initial_layer": [
+		"75"
+	],
+	"cool_plate_temp": [
+		"75"
+	],
+	"cool_plate_temp_initial_layer": [
+		"75"
+	],
+	"textured_plate_temp": [
+		"75"
+	],
+	"textured_plate_temp_initial_layer": [
+		"75"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"full_fan_speed_layer": [
+		"8"
 	],
 	"slow_down_min_speed": [
-		"10"
+		"20"
 	],
 	"slow_down_layer_time": [
 		"4"
 	],
-	"additional_cooling_fan_speed": [
+	"fan_cooling_layer_time": [
-		"70"
+		"100"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"filament_retraction_length": [
+		"1.5"
+	],
+	"filament_retraction_speed": [
+		"35"
+	],
+	"filament_deretraction_speed": [
+		"30"
+	],
+	"filament_z_hop": [
+		"0.4"
 	],
 	"filament_start_gcode": [
-		"; filament start gcode\n"
+		"; Generic PLA @IdeaFormer IR3 V2 — belt PLA, bed 75C"
 	]
 }

resources/profiles/IdeaFormer/filament/eSUN PLA @IdeaFormer IR3 V2.json

@@ -0,0 +1,34 @@
+{
+	"type": "filament",
+	"name": "eSUN PLA @IdeaFormer IR3 V2",
+	"inherits": "Generic PLA @IdeaFormer IR3 V2",
+	"from": "system",
+	"instantiation": "true",
+	"compatible_printers": [
+		"IdeaFormer IR3 V2 0.4 nozzle"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"filament_vendor": [
+		"eSUN"
+	],
+	"filament_settings_id": [
+		"eSUN PLA @IdeaFormer IR3 V2"
+	],
+	"nozzle_temperature_initial_layer": [
+		"200"
+	],
+	"nozzle_temperature": [
+		"200"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"pressure_advance": [
+		"0.12"
+	],
+	"filament_max_volumetric_speed": [
+		"20"
+	]
+}

resources/profiles/IdeaFormer/machine/IdeaFormer IR3 V2 0.4 nozzle.json

@@ -0,0 +1,94 @@
+{
+	"type": "machine",
+	"name": "IdeaFormer IR3 V2 0.4 nozzle",
+	"inherits": "fdm_belt_common",
+	"from": "system",
+	"setting_id": "GMIF001",
+	"instantiation": "true",
+	"printer_model": "IdeaFormer IR3 V2",
+	"printer_variant": "0.4",
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"printable_area": [
+		"0x0",
+		"250x0",
+		"250x2000",
+		"0x2000"
+	],
+	"printable_height": "250",
+	"belt_printer_infinite_y": "1",
+	"thumbnails": [
+		"48x48/PNG",
+		"300x300/PNG"
+	],
+	"default_filament_profile": [
+		"Generic PLA @IdeaFormer IR3 V2"
+	],
+	"default_print_profile": "0.20mm Standard @IdeaFormer IR3 V2",
+	"use_relative_e_distances": "1",
+	"machine_max_acceleration_e": [
+		"5000"
+	],
+	"machine_max_acceleration_extruding": [
+		"5000"
+	],
+	"machine_max_acceleration_retracting": [
+		"1000"
+	],
+	"machine_max_acceleration_travel": [
+		"9000"
+	],
+	"machine_max_acceleration_x": [
+		"5000"
+	],
+	"machine_max_acceleration_y": [
+		"5000"
+	],
+	"machine_max_acceleration_z": [
+		"100"
+	],
+	"machine_max_jerk_e": [
+		"2.5"
+	],
+	"machine_max_jerk_x": [
+		"10"
+	],
+	"machine_max_jerk_y": [
+		"10"
+	],
+	"machine_max_jerk_z": [
+		"0.4"
+	],
+	"machine_max_speed_e": [
+		"60"
+	],
+	"machine_max_speed_x": [
+		"500"
+	],
+	"machine_max_speed_y": [
+		"500"
+	],
+	"machine_max_speed_z": [
+		"20"
+	],
+	"retraction_length": [
+		"2"
+	],
+	"retraction_speed": [
+		"40"
+	],
+	"deretraction_speed": [
+		"40"
+	],
+	"z_hop": [
+		"0.4"
+	],
+	"retract_lift_below": [
+		"300"
+	],
+	"machine_start_gcode": "; === IdeaFormer IR3 V2 Belt Printer Start ===\n; Axes: X=lateral, Y=gantry height (probe), Z=belt\nG90 ; absolute positioning\nM82 ; absolute extruder\nG21 ; millimeters\nG28 ; home all axes\nG1 Y20 F500 ; lift nozzle 20mm from belt\n; Bed + hotend temps come from the active filament profile. Belt PLA requires 75 C bed — use Generic/eSun PLA @IdeaFormer IR3 V2 filament presets to get it automatically.\nM140 S[hot_plate_temp_initial_layer] ; set bed temp\nM104 S[nozzle_temperature_initial_layer] ; hotend temp\nM109 S[nozzle_temperature_initial_layer] ; wait hotend\nM190 S[hot_plate_temp_initial_layer] ; wait bed\n; --- Purge blob ---\nG92 E0 ; zero extruder\nG1 Y.1 ; nozzle 0.1mm above belt\nG1 E15 F1000 ; purge 15mm blob\nG1 Z20 E25 F800 ; belt advance 20mm + extrude\nG1 E23 ; retract 2mm\nG28 Y ; re-probe belt surface\nG1 E25 ; de-retract\n; --- Prime lines (full 250mm bed width) ---\nFMS_on ; filament motion sensor\nG1 X250 E50 F2000 ; prime line 1\nG92 Z0 ; reset belt origin\nG1 Z.4 ; belt advance 0.4mm\nG1 X0 E75 ; prime line 2\nG1 F1000 ; default feedrate\nG92 E0 Z0 ; zero extruder + belt = print origin\n",
+	"machine_end_gcode": "; === IdeaFormer IR3 V2 Belt Printer End ===\nM400 ; wait for moves to finish\nM104 S0 ; heater off\nM140 S0 ; bed off\nG92 E0 ; zero extruder\nG1 E-5 F300 ; retract 5mm\nG4 P5000 ; wait for ooze\nG91 ; relative mode - keep every end move relative on a belt\nG1 Y20 F1000 ; raise gantry 20mm for clearance over the part\nG1 Z676 F3000 ; advance belt one full machine-depth to eject the part and clean the belt\nG90 ; back to absolute\nG28 X ; home X only - NEVER 'G28' all: that homes Z/belt and reverses the whole print back into the gantry\nFMS_off ; filament motion sensor off\nBED_MESH_CLEAR\nM84 ; disable motors\n",
+	"machine_pause_gcode": "PAUSE",
+	"layer_change_gcode": "G92 E0 ; belt: reset extruder at layer change (relative E)"
+}

resources/profiles/IdeaFormer/machine/IdeaFormer IR3 V2.json

@@ -0,0 +1,12 @@
+{
+	"type": "machine_model",
+	"name": "IdeaFormer IR3 V2",
+	"model_id": "IdeaFormer_IR3_V2",
+	"nozzle_diameter": "0.4",
+	"machine_tech": "FFF",
+	"family": "IdeaFormer",
+	"bed_model": "",
+	"bed_texture": "",
+	"hotend_model": "",
+	"default_materials": "Generic PLA @IdeaFormer IR3 V2;Generic PETG @IdeaFormer IR3 V2"
+}

resources/profiles/IdeaFormer/machine/fdm_belt_common.json

@@ -0,0 +1,99 @@
+{
+	"type": "machine",
+	"name": "fdm_belt_common",
+	"inherits": "fdm_klipper_common",
+	"from": "system",
+	"instantiation": "false",
+	"gcode_flavor": "klipper",
+	"single_extruder_multi_material": "0",
+	"default_filament_profile": [
+		"Generic PLA @System"
+	],
+	"default_print_profile": "0.20mm Standard @System",
+	"max_layer_height": [
+		"0.32"
+	],
+	"min_layer_height": [
+		"0.08"
+	],
+	"deretraction_speed": [
+		"30"
+	],
+	"extruder_colour": [
+		"#FCE94F"
+	],
+	"extruder_offset": [
+		"0x0"
+	],
+	"long_retractions_when_cut": [
+		"0"
+	],
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"retract_before_wipe": [
+		"70%"
+	],
+	"retract_length_toolchange": [
+		"2"
+	],
+	"retract_lift_above": [
+		"0"
+	],
+	"retract_lift_below": [
+		"0"
+	],
+	"retract_lift_enforce": [
+		"All Surfaces"
+	],
+	"retract_restart_extra": [
+		"0"
+	],
+	"retract_restart_extra_toolchange": [
+		"0"
+	],
+	"retract_when_changing_layer": [
+		"1"
+	],
+	"retraction_distances_when_cut": [
+		"18"
+	],
+	"retraction_length": [
+		"0.8"
+	],
+	"retraction_minimum_travel": [
+		"1"
+	],
+	"retraction_speed": [
+		"30"
+	],
+	"travel_slope": [
+		"3"
+	],
+	"wipe": [
+		"1"
+	],
+	"wipe_distance": [
+		"1"
+	],
+	"z_hop": [
+		"0.4"
+	],
+	"z_hop_types": [
+		"Normal Lift"
+	],
+	"gcode_remap_x": "rev_x",
+	"gcode_remap_y": "pos_z",
+	"gcode_remap_z": "pos_y",
+	"printer_extruder_id": [
+		"1"
+	],
+	"belt_printer": "1",
+	"belt_slice_rotation": "x",
+	"belt_slice_rotation_angle": "45",
+	"belt_slice_rotation_global": "1",
+	"build_plate_tilt_x": "45",
+	"purge_in_prime_tower": "0",
+	"scan_first_layer": "0",
+	"auxiliary_fan": "0"
+}

resources/profiles/IdeaFormer/machine/fdm_klipper_common.json

@@ -0,0 +1,141 @@
+{
+	"type": "machine",
+	"name": "fdm_klipper_common",
+	"inherits": "fdm_machine_common",
+	"from": "system",
+	"instantiation": "false",
+	"gcode_flavor": "klipper",
+	"machine_max_acceleration_e": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_extruding": [
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_retracting": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_travel": [
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_x": [
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_y": [
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_z": [
+		"500",
+		"200"
+	],
+	"machine_max_speed_e": [
+		"25",
+		"25"
+	],
+	"machine_max_speed_x": [
+		"500",
+		"200"
+	],
+	"machine_max_speed_y": [
+		"500",
+		"200"
+	],
+	"machine_max_speed_z": [
+		"12",
+		"12"
+	],
+	"machine_max_jerk_e": [
+		"2.5",
+		"2.5"
+	],
+	"machine_max_jerk_x": [
+		"9",
+		"9"
+	],
+	"machine_max_jerk_y": [
+		"9",
+		"9"
+	],
+	"machine_max_jerk_z": [
+		"0.2",
+		"0.4"
+	],
+	"machine_min_extruding_rate": [
+		"0",
+		"0"
+	],
+	"machine_min_travel_rate": [
+		"0",
+		"0"
+	],
+	"max_layer_height": [
+		"0.32"
+	],
+	"min_layer_height": [
+		"0.08"
+	],
+	"printable_height": "250",
+	"extruder_clearance_radius": "65",
+	"extruder_clearance_height_to_rod": "36",
+	"extruder_clearance_height_to_lid": "140",
+	"printer_settings_id": "",
+	"printer_technology": "FFF",
+	"printer_variant": "0.4",
+	"retraction_minimum_travel": [
+		"1"
+	],
+	"retract_before_wipe": [
+		"70%"
+	],
+	"retract_when_changing_layer": [
+		"1"
+	],
+	"retraction_length": [
+		"0.8"
+	],
+	"retract_length_toolchange": [
+		"2"
+	],
+	"z_hop": [
+		"0.4"
+	],
+	"retract_restart_extra": [
+		"0"
+	],
+	"retract_restart_extra_toolchange": [
+		"0"
+	],
+	"retraction_speed": [
+		"30"
+	],
+	"deretraction_speed": [
+		"30"
+	],
+	"z_hop_types": "Normal Lift",
+	"silent_mode": "0",
+	"single_extruder_multi_material": "1",
+	"change_filament_gcode": "",
+	"wipe": [
+		"1"
+	],
+	"default_filament_profile": [
+		"Generic PLA @System"
+	],
+	"default_print_profile": "0.20mm Standard @MyKlipper",
+	"bed_exclude_area": [
+		"0x0"
+	],
+	"machine_start_gcode": "M190 S[bed_temperature_initial_layer_single]\nM109 S[nozzle_temperature_initial_layer]\nPRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single]\n",
+	"machine_end_gcode": "PRINT_END",
+	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
+	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
+	"machine_pause_gcode": "PAUSE",
+	"scan_first_layer": "0",
+	"nozzle_type": "undefine",
+	"auxiliary_fan": "0"
+}

resources/profiles/IdeaFormer/machine/fdm_machine_common.json

@@ -0,0 +1,119 @@
+{
+	"type": "machine",
+	"name": "fdm_machine_common",
+	"from": "system",
+	"instantiation": "false",
+	"printer_technology": "FFF",
+	"deretraction_speed": [
+		"40"
+	],
+	"extruder_colour": [
+		"#FCE94F"
+	],
+	"extruder_offset": [
+		"0x0"
+	],
+	"gcode_flavor": "marlin",
+	"silent_mode": "0",
+	"machine_max_acceleration_e": [
+		"5000"
+	],
+	"machine_max_acceleration_extruding": [
+		"10000"
+	],
+	"machine_max_acceleration_retracting": [
+		"1000"
+	],
+	"machine_max_acceleration_x": [
+		"10000"
+	],
+	"machine_max_acceleration_y": [
+		"10000"
+	],
+	"machine_max_acceleration_z": [
+		"500"
+	],
+	"machine_max_speed_e": [
+		"60"
+	],
+	"machine_max_speed_x": [
+		"500"
+	],
+	"machine_max_speed_y": [
+		"500"
+	],
+	"machine_max_speed_z": [
+		"10"
+	],
+	"machine_max_jerk_e": [
+		"5"
+	],
+	"machine_max_jerk_x": [
+		"8"
+	],
+	"machine_max_jerk_y": [
+		"8"
+	],
+	"machine_max_jerk_z": [
+		"0.4"
+	],
+	"machine_min_extruding_rate": [
+		"0"
+	],
+	"machine_min_travel_rate": [
+		"0"
+	],
+	"max_layer_height": [
+		"0.32"
+	],
+	"min_layer_height": [
+		"0.08"
+	],
+	"printable_height": "250",
+	"extruder_clearance_radius": "65",
+	"extruder_clearance_height_to_rod": "36",
+	"extruder_clearance_height_to_lid": "140",
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"printer_settings_id": "",
+	"printer_variant": "0.4",
+	"retraction_minimum_travel": [
+		"2"
+	],
+	"retract_before_wipe": [
+		"70%"
+	],
+	"retract_when_changing_layer": [
+		"1"
+	],
+	"retraction_length": [
+		"1"
+	],
+	"retract_length_toolchange": [
+		"1"
+	],
+	"z_hop": [
+		"0"
+	],
+	"retract_restart_extra": [
+		"0"
+	],
+	"retract_restart_extra_toolchange": [
+		"0"
+	],
+	"retraction_speed": [
+		"60"
+	],
+	"single_extruder_multi_material": "1",
+	"change_filament_gcode": "",
+	"wipe": [
+		"1"
+	],
+	"default_print_profile": "",
+	"machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up",
+	"machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end",
+	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
+	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
+	"machine_pause_gcode": "M601"
+}

resources/profiles/IdeaFormer/process/0.20mm Standard @IdeaFormer IR3 V2.json

@@ -0,0 +1,22 @@
+{
+	"type": "process",
+	"name": "0.20mm Standard @IdeaFormer IR3 V2",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"instantiation": "true",
+	"layer_height": "0.2",
+	"initial_layer_print_height": "0.2",
+	"initial_layer_line_width": "0.42",
+	"wall_loops": "2",
+	"reduce_infill_retraction": "1",
+	"detect_overhang_wall": "1",
+	"skirt_loops": "0",
+	"skirt_distance": "0",
+	"sparse_infill_pattern": "grid",
+	"sparse_infill_speed": "200",
+	"support_base_pattern": "rectilinear",
+	"support_interface_pattern": "rectilinear",
+	"compatible_printers": [
+		"IdeaFormer IR3 V2 0.4 nozzle"
+	]
+}

resources/profiles/IdeaFormer/process/fdm_process_common.json

@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"name": "fdm_process_common",
+	"from": "system",
+	"instantiation": "false",
+	"adaptive_layer_height": "0",
+	"reduce_crossing_wall": "0",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_thickness": "0",
+	"bridge_speed": "50",
+	"brim_width": "5",
+	"brim_object_gap": "0.1",
+	"compatible_printers": [],
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "1000",
+	"initial_layer_acceleration": "500",
+	"top_surface_acceleration": "1000",
+	"travel_acceleration": "1000",
+	"inner_wall_acceleration": "1000",
+	"outer_wall_acceleration": "700",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0",
+	"enable_arc_fitting": "0",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "10%",
+	"ironing_spacing": "0.15",
+	"ironing_speed": "30",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[initial_tool]}_{printer_model}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"slowdown_for_curled_perimeters": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "50",
+	"overhang_3_4_speed": "30",
+	"overhang_4_4_speed": "10",
+	"line_width": "110%",
+	"inner_wall_line_width": "110%",
+	"outer_wall_line_width": "100%",
+	"top_surface_line_width": "93.75%",
+	"sparse_infill_line_width": "110%",
+	"initial_layer_line_width": "120%",
+	"internal_solid_infill_line_width": "120%",
+	"support_line_width": "96%",
+	"wall_loops": "3",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "3",
+	"min_skirt_length": "4",
+	"skirt_loops": "0",
+	"minimum_sparse_infill_area": "15",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.2",
+	"support_bottom_z_distance": "0.2",
+	"support_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "2",
+	"support_interface_bottom_layers": "2",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "80",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "150",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "0.35",
+	"tree_support_branch_angle": "30",
+	"tree_support_wall_count": "0",
+	"tree_support_with_infill": "0",
+	"detect_thin_wall": "0",
+	"top_surface_pattern": "monotonicline",
+	"top_shell_thickness": "0.8",
+	"enable_prime_tower": "1",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"layer_height": "0.2",
+	"bottom_shell_layers": "3",
+	"top_shell_layers": "4",
+	"bridge_flow": "1",
+	"initial_layer_speed": "45",
+	"initial_layer_infill_speed": "45",
+	"outer_wall_speed": "45",
+	"inner_wall_speed": "80",
+	"sparse_infill_speed": "150",
+	"internal_solid_infill_speed": "150",
+	"top_surface_speed": "50",
+	"gap_infill_speed": "30",
+	"travel_speed": "200"
+}

resources/profiles/OrcaFilamentLibrary.json

@@ -1,6 +1,6 @@
 {
 	"name": "OrcaFilamentLibrary",
-	"version": "02.04.00.04",
+	"version": "02.04.00.03",
 	"force_update": "0",
 	"description": "Orca Filament Library",
 	"filament_list": [

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PET-CF @base.json

@@ -36,9 +36,6 @@
 	"filament_max_volumetric_speed": [
 		"8"
 	],
-	"filament_multitool_ramming_flow": [
-		"8"
-	],
 	"filament_type": [
 		"PET-CF"
 	],

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Basic @base.json

@@ -39,9 +39,6 @@
 	"filament_max_volumetric_speed": [
 		"8"
 	],
-	"filament_multitool_ramming_flow": [
-		"8"
-	],
 	"filament_vendor": [
 		"Bambu Lab"
 	],

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Translucent @base.json

@@ -39,9 +39,6 @@
 	"filament_max_volumetric_speed": [
 		"6"
 	],
-	"filament_multitool_ramming_flow": [
-		"6"
-	],
 	"filament_vendor": [
 		"Bambu Lab"
 	],

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Aero @base.json

@@ -21,9 +21,6 @@
 	"filament_max_volumetric_speed": [
 		"6"
 	],
-	"filament_multitool_ramming_flow": [
-		"6"
-	],
 	"filament_type": [
 		"PLA-AERO"
 	],

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PLA-PETG @base.json

@@ -27,9 +27,6 @@
 	"filament_max_volumetric_speed": [
 		"6"
 	],
-	"filament_multitool_ramming_flow": [
-		"6"
-	],
 	"filament_scarf_seam_type": [
 		"none"
 	],

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu Support for ABS @base.json

@@ -21,9 +21,6 @@
 	"filament_max_volumetric_speed": [
 		"6"
 	],
-	"filament_multitool_ramming_flow": [
-		"6"
-	],
 	"filament_vendor": [
 		"Bambu Lab"
 	],

resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX TPU 60A @base.json

@@ -36,9 +36,6 @@
 	"filament_max_volumetric_speed": [
 		"1"
 	],
-	"filament_multitool_ramming_flow": [
-		"1"
-	],
 	"filament_retraction_minimum_travel": [
 		"3"
 	],

resources/profiles/OrcaFilamentLibrary/filament/Elas/Elas ASA @base.json

@@ -72,6 +72,15 @@
 	"fan_min_speed": [
 		"10"
 	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
 	"filament_cost": [
 		"599"
 	],
@@ -90,12 +99,30 @@
 	"filament_is_support": [
 		"0"
 	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
 	"filament_long_retractions_when_cut": [
 		"nil"
 	],
 	"filament_max_volumetric_speed": [
 		"15"
 	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"0"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"10"
+	],
+	"filament_multitool_ramming_volume": [
+		"10"
+	],
 	"filament_notes": [
 		""
 	],
@@ -138,6 +165,21 @@
 	"filament_soluble": [
 		"0"
 	],
+	"filament_stamping_distance": [
+		"0"
+	],
+	"filament_stamping_loading_speed": [
+		"0"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
 	"filament_vendor": [
 		"Elas"
 	],

resources/profiles/OrcaFilamentLibrary/filament/Elas/Elas PETG Basic @base.json

@@ -42,6 +42,15 @@
 	"fan_min_speed": [
 		"20"
 	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
 	"filament_cost": [
 		"445"
 	],
@@ -60,12 +69,30 @@
 	"filament_is_support": [
 		"0"
 	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
 	"filament_long_retractions_when_cut": [
 		"1"
 	],
 	"filament_max_volumetric_speed": [
 		"18"
 	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"0"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"10"
+	],
+	"filament_multitool_ramming_volume": [
+		"10"
+	],
 	"filament_notes": [
 		""
 	],
@@ -108,6 +135,21 @@
 	"filament_soluble": [
 		"0"
 	],
+	"filament_stamping_distance": [
+		"0"
+	],
+	"filament_stamping_loading_speed": [
+		"0"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
 	"filament_wipe": [
 		"nil"
 	],

resources/profiles/OrcaFilamentLibrary/filament/Elas/Elas PLA Basic @base.json

@@ -71,6 +71,15 @@
 	"fan_min_speed": [
 		"60"
 	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
 	"filament_cost": [
 		"449.5"
 	],
@@ -89,12 +98,30 @@
 	"filament_is_support": [
 		"0"
 	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
 	"filament_long_retractions_when_cut": [
 		"nil"
 	],
 	"filament_max_volumetric_speed": [
 		"25"
 	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"0"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"10"
+	],
+	"filament_multitool_ramming_volume": [
+		"10"
+	],
 	"filament_notes": [
 		""
 	],
@@ -137,6 +164,21 @@
 	"filament_soluble": [
 		"0"
 	],
+	"filament_stamping_distance": [
+		"0"
+	],
+	"filament_stamping_loading_speed": [
+		"0"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
 	"filament_vendor": [
 		"Elas"
 	],

resources/profiles/OrcaFilamentLibrary/filament/Elas/Elas PLA Pro @base.json

@@ -71,6 +71,15 @@
 	"fan_min_speed": [
 		"100"
 	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
 	"filament_cost": [
 		"500"
 	],
@@ -89,12 +98,30 @@
 	"filament_is_support": [
 		"0"
 	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
 	"filament_long_retractions_when_cut": [
 		"nil"
 	],
 	"filament_max_volumetric_speed": [
 		"18"
 	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"0"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"10"
+	],
+	"filament_multitool_ramming_volume": [
+		"10"
+	],
 	"filament_notes": [
 		""
 	],
@@ -137,6 +164,21 @@
 	"filament_soluble": [
 		"0"
 	],
+	"filament_stamping_distance": [
+		"0"
+	],
+	"filament_stamping_loading_speed": [
+		"0"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
 	"filament_vendor": [
 		"Elas"
 	],

resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PAHT-CF @System.json

@@ -24,9 +24,6 @@
 	"filament_max_volumetric_speed": [
 		"6"
 	],
-	"filament_multitool_ramming_flow": [
-		"6"
-	],
 	"nozzle_temperature": [
 		"290"
 	],

resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PETG @base.json

@@ -35,9 +35,6 @@
 	"filament_max_volumetric_speed": [
 		"8"
 	],
-	"filament_multitool_ramming_flow": [
-		"8"
-	],
 	"filament_vendor": [
 		"Elegoo"
 	],

resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA Wood @System.json

@@ -12,9 +12,6 @@
 	"filament_max_volumetric_speed": [
 		"10"
 	],
-	"filament_multitool_ramming_flow": [
-		"10"
-	],
 	"nozzle_temperature": [
 		"220"
 	],

resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints PLA Neon @System.json

@@ -44,8 +44,5 @@
 	],
 	"filament_max_volumetric_speed": [
 		"10"
-	],
-	"filament_multitool_ramming_flow": [
-		"10"
 	]
 }

resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints PLA Silk @System.json

@@ -44,8 +44,5 @@
 	],
 	"filament_max_volumetric_speed": [
 		"8"
-	],
-	"filament_multitool_ramming_flow": [
-		"8"
 	]
 }

resources/profiles/OrcaFilamentLibrary/filament/Generic PA-CF @System.json

@@ -10,8 +10,5 @@
 	"filament_type": [
 		"PA-CF"
 	],
-	"filament_multitool_ramming_flow": [
-		"8"
-	],
 	"compatible_printers": []
 }

resources/profiles/OrcaFilamentLibrary/filament/Generic PETG HF @System.json

@@ -8,8 +8,5 @@
 	"filament_max_volumetric_speed": [
 		"20"
 	],
-	"filament_multitool_ramming_flow": [
-		"20"
-	],
 	"compatible_printers": []
 }

resources/profiles/OrcaFilamentLibrary/filament/Generic PETG-CF @System.json

@@ -17,9 +17,6 @@
 	"filament_max_volumetric_speed": [
 		"11.5"
 	],
-	"filament_multitool_ramming_flow": [
-		"13"
-	],
 	"overhang_fan_speed": [
 		"100"
 	],

resources/profiles/OrcaFilamentLibrary/filament/Generic PLA High Speed @System.json

@@ -12,9 +12,6 @@
 	"filament_max_volumetric_speed": [
 		"18"
 	],
-	"filament_multitool_ramming_flow": [
-		"25"
-	],
 	"slow_down_layer_time": [
 		"4"
 	],

resources/profiles/OrcaFilamentLibrary/filament/Generic PLA Matte @System.json

@@ -8,9 +8,6 @@
 	"filament_max_volumetric_speed": [
 		"11"
 	],
-	"filament_multitool_ramming_flow": [
-		"11"
-	],
 	"filament_retraction_length": [
 		"0.8"
 	],

resources/profiles/OrcaFilamentLibrary/filament/Generic PP-CF @System.json

@@ -15,9 +15,6 @@
 	"filament_max_volumetric_speed": [
 		"6"
 	],
-	"filament_multitool_ramming_flow": [
-		"6"
-	],
 	"filament_type": [
 		"PP-CF"
 	],

resources/profiles/OrcaFilamentLibrary/filament/Generic PP-GF @System.json

@@ -15,9 +15,6 @@
 	"filament_max_volumetric_speed": [
 		"6"
 	],
-	"filament_multitool_ramming_flow": [
-		"6"
-	],
 	"filament_type": [
 		"PP-GF"
 	],

resources/profiles/OrcaFilamentLibrary/filament/Overture/Overture Air PLA @base.json

@@ -17,9 +17,6 @@
 	"filament_max_volumetric_speed": [
 		"8"
 	],
-	"filament_multitool_ramming_flow": [
-		"8"
-	],
 	"filament_vendor": [
 		"Overture"
 	],

resources/profiles/OrcaFilamentLibrary/filament/Valment/Valment PLA Silk @base.json

@@ -23,9 +23,6 @@
 	"filament_max_volumetric_speed": [
 		"7.5"
 	],
-	"filament_multitool_ramming_flow": [
-		"7.5"
-	],
 	"filament_vendor": [
 		"Valment"
 	],

resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_abs.json

@@ -43,12 +43,6 @@
 	"filament_max_volumetric_speed": [
 		"12"
 	],
-	"filament_multitool_ramming_flow": [
-		"15"
-	],
-	"filament_multitool_ramming_volume": [
-		"10"
-	],
 	"filament_type": [
 		"ABS"
 	],

resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_asa.json

@@ -43,12 +43,6 @@
 	"filament_max_volumetric_speed": [
 		"12"
 	],
-	"filament_multitool_ramming_flow": [
-		"12"
-	],
-	"filament_multitool_ramming_volume": [
-		"10"
-	],
 	"filament_type": [
 		"ASA"
 	],

resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_bvoh.json

@@ -41,15 +41,6 @@
 	"filament_max_volumetric_speed": [
 		"8"
 	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"6"
-	],
-	"filament_multitool_ramming_volume": [
-		"0.1"
-	],
 	"filament_type": [
 		"BVOH"
 	],

resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_common.json

@@ -66,12 +66,6 @@
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
 	],
-	"filament_multitool_ramming": [
-		"1"
-	],
-	"filament_multitool_ramming_volume": [
-		"5"
-	],
 	"filament_retract_before_wipe": [
 		"nil"
 	],

resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_cope.json

@@ -41,9 +41,6 @@
 	"filament_max_volumetric_speed": [
 		"16"
 	],
-	"filament_multitool_ramming_flow": [
-		"16"
-	],
 	"filament_scarf_seam_type": [
 		"none"
 	],

resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_eva.json

@@ -8,9 +8,6 @@
 	"filament_type": [
 		"EVA"
 	],
-	"filament_multitool_ramming_flow": [
-		"12"
-	],
 	"supertack_plate_temp": [
 		"0"
 	],

resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_hips.json

@@ -41,9 +41,6 @@
 	"filament_max_volumetric_speed": [
 		"8"
 	],
-	"filament_multitool_ramming_flow": [
-		"8"
-	],
 	"filament_type": [
 		"HIPS"
 	],

resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pa.json

@@ -44,9 +44,6 @@
 	"filament_max_volumetric_speed": [
 		"8"
 	],
-	"filament_multitool_ramming_flow": [
-		"12"
-	],
 	"filament_type": [
 		"PA"
 	],

resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_paht.json

@@ -7,9 +7,6 @@
 	"filament_max_volumetric_speed": [
 		"12"
 	],
-	"filament_multitool_ramming_flow": [
-		"12"
-	],
 	"filament_type": [
 		"PAHT"
 	],

resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pc.json

@@ -86,9 +86,6 @@
 	"filament_max_volumetric_speed": [
 		"12"
 	],
-	"filament_multitool_ramming_flow": [
-		"16"
-	],
 	"filament_flow_ratio": [
 		"0.94"
 	]

resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pctg.json

@@ -26,9 +26,6 @@
 	"filament_max_volumetric_speed": [
 		"12"
 	],
-	"filament_multitool_ramming_flow": [
-		"10"
-	],
 	"filament_type": [
 		"PCTG"
 	],

resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pe.json

@@ -38,9 +38,6 @@
 	"filament_max_volumetric_speed": [
 		"12"
 	],
-	"filament_multitool_ramming_flow": [
-		"12"
-	],
 	"filament_type": [
 		"PE"
 	],

resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pet.json

@@ -26,9 +26,6 @@
 	"filament_max_volumetric_speed": [
 		"10"
 	],
-	"filament_multitool_ramming_flow": [
-		"15"
-	],
 	"filament_type": [
 		"PETG"
 	],

resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pha.json

@@ -38,9 +38,6 @@
 	"filament_max_volumetric_speed": [
 		"6"
 	],
-	"filament_multitool_ramming_flow": [
-		"6"
-	],
 	"filament_type": [
 		"PHA"
 	],

resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pla.json

@@ -38,9 +38,6 @@
 	"filament_max_volumetric_speed": [
 		"12"
 	],
-	"filament_multitool_ramming_flow": [
-		"20"
-	],
 	"filament_scarf_seam_type": [
 		"none"
 	],

resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pla_silk.json

@@ -9,9 +9,6 @@
 	"filament_flow_ratio": [
 		"0.98"
 	],
-	"filament_multitool_ramming_flow": [
-		"10"
-	],
 	"slow_down_layer_time": [
 		"8"
 	]

resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pp.json

@@ -38,9 +38,6 @@
 	"filament_max_volumetric_speed": [
 		"12"
 	],
-	"filament_multitool_ramming_flow": [
-		"12"
-	],
 	"filament_type": [
 		"PP"
 	],

resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_ppa.json

@@ -47,9 +47,6 @@
 	"filament_max_volumetric_speed": [
 		"8"
 	],
-	"filament_multitool_ramming_flow": [
-		"8"
-	],
 	"filament_type": [
 		"PPA-CF"
 	],

resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pps.json

@@ -43,9 +43,6 @@
 	"filament_max_volumetric_speed": [
 		"4"
 	],
-	"filament_multitool_ramming_flow": [
-		"4"
-	],
 	"filament_type": [
 		"PPS"
 	],

resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pva.json

@@ -40,15 +40,6 @@
 	"filament_max_volumetric_speed": [
 		"12"
 	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"6"
-	],
-	"filament_multitool_ramming_volume": [
-		"0.1"
-	],
 	"filament_soluble": [
 		"1"
 	],

resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_sbs.json

@@ -11,9 +11,6 @@
 	"filament_max_volumetric_speed": [
 		"12"
 	],
-	"filament_multitool_ramming_flow": [
-		"12"
-	],
 	"filament_type": [
 		"SBS"
 	],

resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_tpu.json

@@ -43,15 +43,6 @@
 	"filament_max_volumetric_speed": [
 		"3.2"
 	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"3.2"
-	],
-	"filament_multitool_ramming_volume": [
-		"0.1"
-	],
 	"filament_retraction_length": [
 		"0.4"
 	],

resources/profiles/OrcaFilamentLibrary/filament/eSUN/eSUN PLA-Marble @base.json

@@ -17,9 +17,6 @@
 	"filament_max_volumetric_speed": [
 		"8"
 	],
-	"filament_multitool_ramming_flow": [
-		"8"
-	],
 	"filament_vendor": [
 		"eSUN"
 	],

resources/profiles/OrcaFilamentLibrary/filament/eSUN/eSUN PLA-Matte @base.json

@@ -17,9 +17,6 @@
 	"filament_max_volumetric_speed": [
 		"8"
 	],
-	"filament_multitool_ramming_flow": [
-		"8"
-	],
 	"filament_vendor": [
 		"eSUN"
 	],

resources/profiles/OrcaFilamentLibrary/filament/eSUN/eSUN ePLA-LW @System.json

@@ -21,9 +21,6 @@
 	"filament_max_volumetric_speed": [
 		"6"
 	],
-	"filament_multitool_ramming_flow": [
-		"6"
-	],
 	"filament_vendor": [
 		"eSUN"
 	],

resources/profiles/Printcepts.json

@@ -0,0 +1,54 @@
+{
+	"name": "Printcepts",
+	"version": "01.00.00.00",
+	"force_update": "0",
+	"description": "Printcepts belt printer configurations",
+	"machine_model_list": [
+		{
+			"name": "BabyBelt Pro",
+			"sub_path": "machine/BabyBelt Pro.json"
+		}
+	],
+	"process_list": [
+		{
+			"name": "fdm_process_common",
+			"sub_path": "process/fdm_process_common.json"
+		},
+		{
+			"name": "0.20mm Standard @BabyBelt Pro",
+			"sub_path": "process/0.20mm Standard @BabyBelt Pro.json"
+		}
+	],
+	"filament_list": [
+		{
+			"name": "Generic PLA @BabyBelt Pro",
+			"sub_path": "filament/Generic PLA @BabyBelt Pro.json"
+		},
+		{
+			"name": "eSUN PLA @BabyBelt Pro",
+			"sub_path": "filament/eSUN PLA @BabyBelt Pro.json"
+		},
+		{
+			"name": "Generic PETG @BabyBelt Pro",
+			"sub_path": "filament/Generic PETG @BabyBelt Pro.json"
+		}
+	],
+	"machine_list": [
+		{
+			"name": "fdm_machine_common",
+			"sub_path": "machine/fdm_machine_common.json"
+		},
+		{
+			"name": "fdm_klipper_common",
+			"sub_path": "machine/fdm_klipper_common.json"
+		},
+		{
+			"name": "fdm_belt_common",
+			"sub_path": "machine/fdm_belt_common.json"
+		},
+		{
+			"name": "BabyBelt Pro 0.4 nozzle",
+			"sub_path": "machine/BabyBelt Pro 0.4 nozzle.json"
+		}
+	]
+}

resources/profiles/Printcepts/BabyBelt Pro_bed_texture.svg

@@ -0,0 +1,70 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<svg xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" width="95.0mm" height="500.0mm" viewBox="0 0 95.0 500.0" preserveAspectRatio="xMidYMid meet">
+  <!-- Printcepts BabyBelt Pro bed texture: 95 x 500 mm belt plate. -->
+  <!-- Transparent plate; green (#195F30) BabyBelt Pro logo centered along X, near the bottom edge. -->
+  <rect x="0" y="0" width="95.0" height="500.0" fill="none"/>
+  <g transform="translate(14.2500,436.3488) scale(0.067538)">
+    <g transform="translate(-11.000000,692.938562) scale(0.100000,-0.100000)"
+fill="#195F30" stroke="none">
+<path d="M1963 5604 l-1423 -1324 0 -2050 0 -2050 443 0 c244 0 741 3 1105 7
+l662 6 0 746 c-1 575 -4 768 -14 841 -47 324 -179 486 -473 581 -40 12 -73 26
+-73 30 0 4 32 17 72 29 212 64 333 166 378 320 35 121 38 191 32 868 l-5 662
+-629 0 c-395 0 -628 4 -628 10 0 5 635 601 1410 1325 776 724 1410 1318 1410
+1321 0 2 -190 4 -422 3 l-423 0 -1422 -1325z m-334 -2029 c143 -16 174 -96
+173 -446 -2 -411 -24 -458 -224 -462 l-93 -2 -3 450 c-1 248 0 456 3 463 3 9
+18 12 47 8 24 -3 67 -8 97 -11z m-4 -1556 c160 -29 173 -62 182 -469 9 -455
+-14 -593 -108 -641 -39 -19 -193 -44 -210 -33 -10 6 -13 1147 -3 1157 6 6 45
+2 139 -14z"/>
+<path d="M3464 5979 c-142 -132 -263 -245 -268 -250 -6 -5 69 -9 190 -9 l199
+1 268 249 267 250 -198 0 -198 0 -260 -241z"/>
+<path d="M3650 5649 c-135 -126 -254 -238 -265 -249 -19 -20 -18 -20 177 -20
+l197 0 228 211 c125 116 246 229 268 250 l40 39 -200 -1 -200 0 -245 -230z"/>
+<path d="M2537 5089 c-101 -24 -204 -105 -251 -197 -96 -190 -19 -420 172
+-514 l67 -33 2670 0 2670 0 57 27 c74 34 146 107 184 183 43 88 43 230 0 322
+-35 76 -113 153 -193 191 l-58 27 -2640 2 c-1513 0 -2656 -3 -2678 -8z m5063
+-77 c-57 -37 -118 -111 -140 -168 -31 -82 -25 -206 12 -279 26 -49 93 -121
+133 -143 15 -8 -640 -11 -2410 -11 l-2430 0 30 21 c200 146 201 425 1 569
+l-39 29 2434 -1 c2263 0 2432 -1 2409 -17z m-4890 -43 c270 -122 185 -526
+-109 -522 -257 2 -370 324 -170 485 74 60 194 76 279 37z m5201 -12 c94 -55
+140 -135 140 -242 0 -285 -393 -374 -517 -117 -26 54 -30 162 -9 219 28 74 97
+139 173 164 53 17 166 4 213 -24z"/>
+<path d="M2917 3973 c-4 -174 -7 -550 -7 -835 l0 -518 326 0 326 0 -7 150 -7
+150 110 0 110 0 11 -32 c5 -18 26 -86 46 -150 l36 -118 325 0 c179 0 323 4
+320 9 -3 4 -155 374 -337 822 -182 448 -333 820 -336 827 -4 9 -105 12 -457
+12 l-453 0 -6 -317z m773 -745 c0 -5 -47 -8 -104 -8 l-103 0 -7 92 c-3 50 -6
+202 -5 337 l1 246 109 -330 c60 -181 109 -333 109 -337z"/>
+<path d="M4680 3455 l0 -835 448 0 c693 1 885 16 985 80 99 63 126 132 134
+340 12 327 -44 405 -342 476 -28 7 -27 8 25 19 199 42 255 95 267 248 11 146
+-32 285 -110 353 -145 126 -329 153 -1049 154 l-358 0 0 -835z m846 520 c36
+-23 44 -54 44 -162 0 -152 -29 -183 -170 -183 l-40 0 0 186 0 187 71 -6 c39
+-3 82 -13 95 -22z m4 -625 c33 -18 40 -52 40 -208 0 -200 -9 -214 -143 -228
+l-67 -7 0 233 0 233 74 -6 c41 -3 84 -10 96 -17z"/>
+<path d="M6150 4286 c0 -3 131 -242 290 -531 l290 -526 0 -304 0 -305 385 0
+385 0 0 299 0 299 305 533 305 534 -377 3 c-207 1 -381 -2 -385 -6 -16 -16
+-110 -258 -172 -444 l-62 -187 -18 77 c-18 75 -139 450 -171 525 l-15 37 -380
+0 c-209 0 -380 -2 -380 -4z"/>
+<path d="M2910 1355 l0 -1185 830 0 830 0 0 240 0 240 -350 0 -350 0 0 255 0
+255 300 0 300 0 0 230 0 230 -300 0 -300 0 0 220 0 220 320 0 320 0 0 240 0
+240 -800 0 -800 0 0 -1185z"/>
+<path d="M4680 1355 l0 -1185 775 0 775 0 0 240 0 240 -295 0 -295 0 0 945 0
+945 -480 0 -480 0 0 -1185z"/>
+<path d="M5800 2300 l0 -240 280 0 280 0 0 -945 0 -945 480 0 480 0 0 945 0
+945 285 0 285 0 0 240 0 240 -1045 0 -1045 0 0 -240z"/>
+<path d="M8032 1358 l-2 -1188 1008 1 c621 1 971 5 912 10 -309 27 -631 139
+-885 306 -593 391 -984 1122 -1025 1918 -4 77 -8 -394 -8 -1047z"/>
+<path d="M7441 1934 c-43 -36 -59 -70 -70 -148 -18 -124 16 -252 76 -291 32
+-21 226 -33 328 -20 114 14 161 97 153 269 -5 96 -24 151 -68 191 -20 18 -39
+20 -205 23 l-182 3 -32 -27z m389 -199 c7 -8 10 -22 6 -30 -4 -13 -34 -15
+-186 -15 -189 0 -202 3 -186 45 8 22 348 22 366 0z"/>
+<path d="M7450 1267 c-14 -6 -35 -32 -47 -57 -21 -41 -23 -58 -23 -222 l0
+-178 270 0 270 0 0 105 0 105 -121 0 -120 0 3 28 3 27 118 3 117 3 0 99 0 100
+-113 0 c-121 0 -138 -7 -162 -65 -8 -19 -9 -19 -12 2 -10 55 -116 84 -183 50z
+m134 -203 c15 -38 8 -44 -54 -44 -62 0 -69 6 -54 44 9 23 99 23 108 0z"/>
+<path d="M466 1193 l-29 -43 -163 0 -164 0 0 -235 0 -235 165 0 165 0 27 -42
+28 -42 3 163 c1 89 1 233 0 319 l-3 157 -29 -42z"/>
+<path d="M7443 620 c-48 -20 -58 -60 -61 -262 l-4 -188 271 0 271 0 0 110 0
+110 -110 0 -110 0 0 70 c0 76 -21 145 -51 160 -22 12 -176 12 -206 0z m161
+-186 c15 -39 8 -44 -64 -44 -72 0 -79 5 -64 44 9 23 119 23 128 0z"/>
+</g>
+  </g>
+</svg>

resources/profiles/Printcepts/filament/Generic PETG @BabyBelt Pro.json

@@ -0,0 +1,112 @@
+{
+	"type": "filament",
+	"name": "Generic PETG @BabyBelt Pro",
+	"inherits": "Generic PETG @System",
+	"from": "system",
+	"instantiation": "true",
+	"compatible_printers": [
+		"BabyBelt Pro 0.4 nozzle"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_settings_id": [
+		"Generic PETG @BabyBelt Pro"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_density": [
+		"1.27"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_cost": [
+		"25"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"nozzle_temperature": [
+		"240"
+	],
+	"nozzle_temperature_initial_layer": [
+		"245"
+	],
+	"nozzle_temperature_range_low": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"260"
+	],
+	"temperature_vitrification": [
+		"70"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"80"
+	],
+	"cool_plate_temp_initial_layer": [
+		"80"
+	],
+	"textured_plate_temp": [
+		"80"
+	],
+	"textured_plate_temp_initial_layer": [
+		"80"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"overhang_fan_speed": [
+		"80"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"full_fan_speed_layer": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"slow_down_layer_time": [
+		"4"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"filament_retraction_length": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"40"
+	],
+	"filament_deretraction_speed": [
+		"40"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_start_gcode": [
+		"; Generic PETG @BabyBelt Pro — belt PETG, bed 80C"
+	]
+}

resources/profiles/Printcepts/filament/Generic PLA @BabyBelt Pro.json

@@ -1,127 +1,112 @@
 {
 	"type": "filament",
+	"name": "Generic PLA @BabyBelt Pro",
+	"inherits": "Generic PLA @System",
 	"from": "system",
-	"instantiation": "false",
+	"instantiation": "true",
-	"name": "Snapmaker PLA Basic @U1 base",
+	"compatible_printers": [
-	"filament_id": "1417031127011",
+		"BabyBelt Pro 0.4 nozzle"
-	"filament_end_gcode": [
-		""
-	],
-	"filament_retraction_length": [
-		"nil"
-	],
-	"filament_loading_speed_start": [
-		"35"
-	],
-	"filament_loading_speed": [
-		"35"
-	],
-	"filament_unloading_speed_start": [
-		"35"
-	],
-	"filament_unloading_speed": [
-		"35"
-	],
-	"filament_load_time": [
-		"2"
-	],
-	"filament_unload_time": [
-		"2"
-	],
-	"filament_cooling_moves": [
-		"2"
-	],
-	"filament_cooling_initial_speed": [
-		"35"
-	],
-	"filament_cooling_final_speed": [
-		"60"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"filament_max_volumetric_speed": [
-		"12"
 	],
 	"filament_type": [
 		"PLA"
 	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_settings_id": [
+		"Generic PLA @BabyBelt Pro"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
 	"filament_density": [
 		"1.24"
 	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
 	"filament_cost": [
 		"20"
 	],
-	"cool_plate_temp": [
+	"filament_max_volumetric_speed": [
-		"60"
+		"12"
 	],
-	"eng_plate_temp": [
+	"nozzle_temperature": [
-		"60"
+		"215"
-	],
-	"hot_plate_temp": [
-		"60"
-	],
-	"textured_plate_temp": [
-		"60"
-	],
-	"cool_plate_temp_initial_layer": [
-		"60"
-	],
-	"eng_plate_temp_initial_layer": [
-		"60"
-	],
-	"hot_plate_temp_initial_layer": [
-		"60"
-	],
-	"textured_plate_temp_initial_layer": [
-		"60"
 	],
 	"nozzle_temperature_initial_layer": [
 		"220"
 	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"nozzle_temperature": [
-		"220"
-	],
-	"temperature_vitrification": [
-		"60"
-	],
 	"nozzle_temperature_range_low": [
 		"190"
 	],
 	"nozzle_temperature_range_high": [
-		"230"
+		"240"
+	],
+	"temperature_vitrification": [
+		"45"
+	],
+	"hot_plate_temp": [
+		"75"
+	],
+	"hot_plate_temp_initial_layer": [
+		"75"
+	],
+	"cool_plate_temp": [
+		"75"
+	],
+	"cool_plate_temp_initial_layer": [
+		"75"
+	],
+	"textured_plate_temp": [
+		"75"
+	],
+	"textured_plate_temp_initial_layer": [
+		"75"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"full_fan_speed_layer": [
+		"8"
 	],
 	"slow_down_min_speed": [
-		"10"
+		"20"
 	],
 	"slow_down_layer_time": [
 		"4"
 	],
-	"additional_cooling_fan_speed": [
+	"fan_cooling_layer_time": [
-		"70"
+		"100"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"filament_retraction_length": [
+		"1.5"
+	],
+	"filament_retraction_speed": [
+		"35"
+	],
+	"filament_deretraction_speed": [
+		"30"
+	],
+	"filament_z_hop": [
+		"0.4"
 	],
 	"filament_start_gcode": [
-		"; filament start gcode\n"
+		"; Generic PLA @BabyBelt Pro — belt PLA, bed 75C"
 	]
 }

resources/profiles/Printcepts/filament/eSUN PLA @BabyBelt Pro.json

@@ -0,0 +1,34 @@
+{
+	"type": "filament",
+	"name": "eSUN PLA @BabyBelt Pro",
+	"inherits": "Generic PLA @BabyBelt Pro",
+	"from": "system",
+	"instantiation": "true",
+	"compatible_printers": [
+		"BabyBelt Pro 0.4 nozzle"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"filament_vendor": [
+		"eSUN"
+	],
+	"filament_settings_id": [
+		"eSUN PLA @BabyBelt Pro"
+	],
+	"nozzle_temperature_initial_layer": [
+		"200"
+	],
+	"nozzle_temperature": [
+		"200"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"pressure_advance": [
+		"0.12"
+	],
+	"filament_max_volumetric_speed": [
+		"20"
+	]
+}

resources/profiles/Printcepts/machine/BabyBelt Pro 0.4 nozzle.json

@@ -0,0 +1,87 @@
+{
+	"type": "machine",
+	"name": "BabyBelt Pro 0.4 nozzle",
+	"inherits": "fdm_belt_common",
+	"from": "system",
+	"setting_id": "GMPC0BBP01",
+	"instantiation": "true",
+	"printer_model": "BabyBelt Pro",
+	"printer_variant": "0.4",
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"default_filament_profile": [
+		"Generic PLA @BabyBelt Pro"
+	],
+	"default_print_profile": "0.20mm Standard @BabyBelt Pro",
+	"printable_area": [
+		"0x0",
+		"95x0",
+		"95x500",
+		"0x500"
+	],
+	"printable_height": "100",
+	"best_object_pos": "0.5,0.05",
+	"nozzle_type": [
+		"hardened_steel"
+	],
+	"printer_extruder_id": [
+		"1"
+	],
+	"printer_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"thumbnails": [
+		"48x48/PNG",
+		"300x300/PNG"
+	],
+	"machine_max_acceleration_e": [
+		"500",
+		"5000"
+	],
+	"machine_max_acceleration_extruding": [
+		"500",
+		"20000"
+	],
+	"machine_max_acceleration_retracting": [
+		"500",
+		"5000"
+	],
+	"machine_max_acceleration_x": [
+		"500",
+		"20000"
+	],
+	"machine_max_acceleration_y": [
+		"500",
+		"20000"
+	],
+	"machine_max_junction_deviation": [
+		"0.01"
+	],
+	"machine_max_speed_x": [
+		"50",
+		"200"
+	],
+	"machine_max_speed_y": [
+		"50",
+		"200"
+	],
+	"machine_max_speed_z": [
+		"5",
+		"12"
+	],
+	"retraction_length": [
+		"1.5"
+	],
+	"retraction_speed": [
+		"20"
+	],
+	"deretraction_speed": [
+		"25"
+	],
+	"retract_lift_enforce": [
+		"Top and Bottom"
+	],
+	"support_chamber_temp_control": "0",
+	"machine_start_gcode": ";Start GCode\nPRINT_START ANGLE=[belt_slice_rotation_angle] EXTRUDER=[nozzle_temperature_initial_layer] BED=[hot_plate_temp_initial_layer] MATERIAL=[filament_type]\n"
+}

resources/profiles/Printcepts/machine/BabyBelt Pro.json

@@ -0,0 +1,12 @@
+{
+	"type": "machine_model",
+	"name": "BabyBelt Pro",
+	"model_id": "Printcepts_BabyBelt_Pro",
+	"nozzle_diameter": "0.4",
+	"machine_tech": "FFF",
+	"family": "Printcepts",
+	"bed_model": "",
+	"bed_texture": "BabyBelt Pro_bed_texture.svg",
+	"hotend_model": "",
+	"default_materials": "Generic PLA @BabyBelt Pro;Generic PETG @BabyBelt Pro"
+}