juli/OrcaSlicer
1
1
Fork 0
mirror of https://github.com/OrcaSlicer/OrcaSlicer.git synced 2026-07-15 23:12:08 +00:00
Code Issues Packages Projects Releases Wiki Activity

belt: fix IR3 V2 end G-code reversing the belt into the part (#56)

Browse Source 
The IdeaFormer IR3 V2 End G-code ran `G28 ; home all`, which homes the
Z (belt) and Y (gantry) axes. On a belt printer Z is the conveyor, so
homing it runs the belt all the way back to origin, dragging the finished
part back under the gantry that G28 has just lowered — the head knocks the
print (reported by an IR3 V2 user; the `G1 Y50` lift came after the G28,
too late).

Replace the end sequence with a belt-safe one: switch to relative mode
(G91), lift the gantry for clearance, advance the belt forward one full
machine-depth (Z676, the 676 mm product depth) to eject the part and cycle
the belt surface clean, then home X only — never the Z/belt axis.
This commit is contained in:
Tommaso Bianchi
2026-06-11 16:30:35 +02:00
committed by GitHub
parent 4f3a608009
commit b7bda9912b
1 changed files with 1 additions and 1 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
resources/profiles/IdeaFormer/machine/IdeaFormer IR3 V2 0.4 nozzle.json
View File

@@ -88,7 +88,7 @@
"300"
],
"machine_start_gcode": "; === IdeaFormer IR3 V2 Belt Printer Start ===\n; Axes: X=lateral, Y=gantry height (probe), Z=belt\nG90 ; absolute positioning\nM82 ; absolute extruder\nG21 ; millimeters\nG28 ; home all axes\nG1 Y20 F500 ; lift nozzle 20mm from belt\n; Bed + hotend temps come from the active filament profile. Belt PLA requires 75 C bed — use Generic/eSun PLA @IdeaFormer IR3 V2 filament presets to get it automatically.\nM140 S[hot_plate_temp_initial_layer] ; set bed temp\nM104 S[nozzle_temperature_initial_layer] ; hotend temp\nM109 S[nozzle_temperature_initial_layer] ; wait hotend\nM190 S[hot_plate_temp_initial_layer] ; wait bed\n; --- Purge blob ---\nG92 E0 ; zero extruder\nG1 Y.1 ; nozzle 0.1mm above belt\nG1 E15 F1000 ; purge 15mm blob\nG1 Z20 E25 F800 ; belt advance 20mm + extrude\nG1 E23 ; retract 2mm\nG28 Y ; re-probe belt surface\nG1 E25 ; de-retract\n; --- Prime lines (full 250mm bed width) ---\nFMS_on ; filament motion sensor\nG1 X250 E50 F2000 ; prime line 1\nG92 Z0 ; reset belt origin\nG1 Z.4 ; belt advance 0.4mm\nG1 X0 E75 ; prime line 2\nG1 F1000 ; default feedrate\nG92 E0 Z0 ; zero extruder + belt = print origin\n",
"machine_end_gcode": "; === IdeaFormer IR3 V2 Belt Printer End ===\nM400 ; wait for moves to finish\nG28 X ; home X axis\nM104 S0 ; heater off\nM140 S0 ; bed off\nG92 E0 ; zero extruder\nG1 E-5 F300 ; retract 5mm\nG4 P7000 ; wait 7s for ooze\nG28 ; home all\nG1 Y50 F1000 ; lift nozzle 50mm\nFMS_off ; filament motion sensor off\nBED_MESH_CLEAR\nM84 ; disable motors\n",
"machine_end_gcode": "; === IdeaFormer IR3 V2 Belt Printer End ===\nM400 ; wait for moves to finish\nM104 S0 ; heater off\nM140 S0 ; bed off\nG92 E0 ; zero extruder\nG1 E-5 F300 ; retract 5mm\nG4 P5000 ; wait for ooze\nG91 ; relative mode - keep every end move relative on a belt\nG1 Y20 F1000 ; raise gantry 20mm for clearance over the part\nG1 Z676 F3000 ; advance belt one full machine-depth to eject the part and clean the belt\nG90 ; back to absolute\nG28 X ; home X only - NEVER 'G28' all: that homes Z/belt and reverses the whole print back into the gantry\nFMS_off ; filament motion sensor off\nBED_MESH_CLEAR\nM84 ; disable motors\n",
"machine_pause_gcode": "PAUSE",
"layer_change_gcode": "G92 E0 ; belt: reset extruder at layer change (relative E)"
}