refactor: connect_printer api and dialog

fix: port BBL implementations from #15711
fix: guard DeviceManager command dispatch when no printer agent is bound
2026-09-22 16:32:40 +00:00 · 2026-09-22 21:54:10 +08:00 · 2026-09-22 21:11:03 +08:00 · 2026-09-22 21:09:58 +08:00 · 2026-09-22 20:55:29 +08:00 · 2026-09-22 19:03:25 +08:00
162 changed files with 6425 additions and 1628 deletions
@@ -58,6 +58,9 @@ Paths below are relative to this skill. Commands run from the repository root.
 9. **Run the full profile checks before reporting completion.** A vendor-scoped pass is only a
   development loop. Review also covers version bumps, assets, non-default processes and hardware
   tuning that CI cannot establish.
+10. **One all-printer preset per product; color is a runtime property, never a preset.** Never ship
+    presets that differ only by color — CI accepts them, so this is a review call. See
+    [color is a runtime property](references/filament-profiles.md#color-is-a-runtime-property).

 ## Creating or modifying a profile

@@ -107,6 +110,7 @@ Paths below are relative to this skill. Commands run from the repository root.
 | A setting has no effect | Key spelling/type, `handle_legacy`, or a config key placed on a `machine_model` |
 | A preset exists but is not selectable | Index registration, `instantiation`, installation and compatibility |
 | A filament is missing, duplicated, or matches the wrong spool | [Compatibility and alias shadowing](references/filament-profiles.md#compatible_printers); [ids](references/ids.md) |
+| Presets differ only by color, or an all-printer library preset lacks `@System` | [Color is a runtime property](references/filament-profiles.md#color-is-a-runtime-property) |
 | A bed temperature is ignored | [Plate-specific temperature keys](references/filament-profiles.md#bed-temperature-is-twelve-keys-not-one) |
 | A change is absent from the running app | Version bump and [installed profile location](references/validation.md#testing-in-the-app) |
 | A check fails | [Error → remedy](references/validation.md#error--remedy) |
@@ -52,6 +52,15 @@ a brand means adding a folder here; the folder name is a directory label only
  collection, so there is no duplicate-name error.
 - You may inherit from an instantiated preset as well as from a base; it is common.

+## Color is a runtime property
+
+`filament_id` identifies a product, not a color; filament sync/AMS reads the color from the spool at
+runtime. A product ships one all-printer preset and the color is chosen at runtime — never a sibling
+preset that differs only by color. A material family (PLA vs PLA Matte vs PLA Silk) is a new product; a
+color is not. A printer tune keeps the product alias and does not multiply per color either.
+
+CI does not catch this — per-color presets pass `check` — so it is a review call.
+
 ## The two most common contributions

 **A printer vendor tuning a generic.** Keep the `Generic X` base name so the alias shadows the library
@@ -46,12 +46,17 @@ to the first `@`; the target half is a label except for reserved forms:

 - `@base` — a non-instantiated product root. `@base` is convention; a base is really identified by
  `instantiation: "false"` and no `setting_id` ([the three-part shape](filament-profiles.md#the-three-part-shape)).
- `@System` — the OrcaFilamentLibrary selectable shim. The literal `Generic <mat> @System` is
-  load-bearing for 3MF/project recovery, beyond the alias rule ([alias shadowing](filament-profiles.md#alias-shadowing)).
+- `@System` — the OrcaFilamentLibrary selectable shim, and the convention for an all-printer product
+  (`<Product> @System`, empty `compatible_printers`); not enforced, so a deviation is worth a review
+  comment. The literal `Generic <mat> @System` is load-bearing for 3MF/project recovery, beyond the
+  alias rule ([alias shadowing](filament-profiles.md#alias-shadowing)).
 - `@<Vendor>`, `@<Vendor> <Model>`, `@<Vendor> <Model> <nozzle> nozzle` — printer tunes, BBL's shape.
  Other vendors differ (a bare model, a printer serial, Creality's `@<Model>-all`). Specificity is judged
  from `compatible_printers`, not the name
  ([one variant, one profile](filament-profiles.md#overlapping-coverage-one-variant-one-profile-per-product)).
+- Color is not part of the product name: `<Product> <Color>` presets are not authored; the color is
+  chosen at runtime
+  ([color is a runtime property](filament-profiles.md#color-is-a-runtime-property)).

 ## Not the same as the filename

@@ -15,6 +15,7 @@ The table highlights gaps that need human review. What CI *does* run:
 | Whether the intended default survived compatibility selection | The sweep can select a different compatible preset |
 | A dangling `compatible_printers` inside an `instantiation: "false"` base | A base never becomes a `Preset`, so the reference check never sees it (a bad `inherits` in a base *is* caught) |
 | A `renamed_from` whose old name is still a live preset | The redirect is inert while a live preset carries that name |
+| A preset differentiated only by color, or an all-printer library preset without `@System` | Per-color presets split one product across ids and the selector fills with near-duplicates; CI stays green |
 | Per-extruder vector length on a multi-nozzle printer | Silently padded (with the **first** value) or truncated |

 ## 1. Was the vendor `version` bumped?
@@ -826,6 +826,37 @@ find_package(OpenSSL REQUIRED)
 find_package(CURL REQUIRED)
 find_package(Freetype REQUIRED)

+if (SLIC3R_GUI)
+    # LibDataChannel's installed export references its bundled dependencies,
+    # but does not install their CMake targets. Recreate those targets from
+    # the same dependency prefix before loading the LibDataChannel config.
+    if (NOT TARGET Usrsctp::usrsctp)
+        find_library(_ORCA_USRSCTP_LIBRARY NAMES usrsctp
+            PATHS "${CMAKE_PREFIX_PATH}/lib" NO_DEFAULT_PATH)
+        if (_ORCA_USRSCTP_LIBRARY)
+            add_library(Usrsctp::usrsctp UNKNOWN IMPORTED GLOBAL)
+            set_target_properties(Usrsctp::usrsctp PROPERTIES
+                IMPORTED_LOCATION "${_ORCA_USRSCTP_LIBRARY}"
+                IMPORTED_LINK_INTERFACE_LANGUAGES C
+                INTERFACE_LINK_LIBRARIES "Threads::Threads")
+        endif()
+    endif()
+
+    if (NOT TARGET LibJuice::LibJuice)
+        find_library(_ORCA_LIBJUICE_LIBRARY NAMES juice
+            PATHS "${CMAKE_PREFIX_PATH}/lib" NO_DEFAULT_PATH)
+        if (_ORCA_LIBJUICE_LIBRARY)
+            add_library(LibJuice::LibJuice UNKNOWN IMPORTED GLOBAL)
+            set_target_properties(LibJuice::LibJuice PROPERTIES
+                IMPORTED_LOCATION "${_ORCA_LIBJUICE_LIBRARY}"
+                IMPORTED_LINK_INTERFACE_LANGUAGES C
+                INTERFACE_LINK_LIBRARIES "Threads::Threads")
+        endif()
+    endif()
+
+    find_package(LibDataChannel CONFIG REQUIRED)
+endif()
+

 add_library(libcurl INTERFACE)
 target_link_libraries(libcurl INTERFACE CURL::libcurl)
@@ -1106,6 +1137,7 @@ function(orcaslicer_copy_dlls target config postfix output_dlls)
    endif ()
    file(COPY ${_occt_dlls}
            ${CMAKE_PREFIX_PATH}/bin/freetype.dll
+            ${CMAKE_PREFIX_PATH}/bin/avformat-61.dll
            ${CMAKE_PREFIX_PATH}/bin/avcodec-61.dll
            ${CMAKE_PREFIX_PATH}/bin/swresample-5.dll
            ${CMAKE_PREFIX_PATH}/bin/swscale-8.dll
@@ -1118,11 +1150,11 @@ function(orcaslicer_copy_dlls target config postfix output_dlls)
        ${_out_dir}/WebView2Loader.dll

        ${_out_dir}/freetype.dll
+        ${_out_dir}/avformat-61.dll
        ${_out_dir}/avcodec-61.dll
        ${_out_dir}/swresample-5.dll
        ${_out_dir}/swscale-8.dll
        ${_out_dir}/avutil-59.dll
-        PARENT_SCOPE
    )
    list(APPEND _dll_list ${_occt_staged})
    set(${output_dlls} ${_dll_list} PARENT_SCOPE)
@@ -1142,7 +1174,10 @@ function(orcaslicer_copy_sos target config postfix output_sos)
        set(_out_dir "${CMAKE_CURRENT_BINARY_DIR}")
    endif ()

-    file(COPY ${CMAKE_PREFIX_PATH}/lib/libavcodec.so
+    file(COPY ${CMAKE_PREFIX_PATH}/lib/libavformat.so
+            ${CMAKE_PREFIX_PATH}/lib/libavformat.so.61
+            ${CMAKE_PREFIX_PATH}/lib/libavformat.so.61.1.100
+            ${CMAKE_PREFIX_PATH}/lib/libavcodec.so
            ${CMAKE_PREFIX_PATH}/lib/libavcodec.so.61
            ${CMAKE_PREFIX_PATH}/lib/libavcodec.so.61.3.100
            ${CMAKE_PREFIX_PATH}/lib/libavutil.so
@@ -1157,6 +1192,9 @@ function(orcaslicer_copy_sos target config postfix output_sos)
         DESTINATION ${_out_dir})

    set(${output_sos}
+        ${_out_dir}/libavformat.so
+        ${_out_dir}/libavformat.so.61
+        ${_out_dir}/libavformat.so.61.1.100
        ${_out_dir}/libavcodec.so
        ${_out_dir}/libavcodec.so.61
        ${_out_dir}/libavcodec.so.61.3.100
@@ -1286,6 +1324,8 @@ endif ()

 if (CMAKE_SYSTEM_NAME STREQUAL "Linux")
    set(LIBRARY_FILES
+    ${LIBDIR_BIN}/libavformat.so.61
+    ${LIBDIR_BIN}/libavformat.so.61.1.100
    ${LIBDIR_BIN}/libavcodec.so.61
    ${LIBDIR_BIN}/libavcodec.so.61.3.100
    ${LIBDIR_BIN}/libavutil.so.59
@@ -156,7 +156,7 @@ if (NOT _is_multi AND NOT CMAKE_BUILD_TYPE)
 endif ()

 function(orcaslicer_add_cmake_project projectname)
-    cmake_parse_arguments(P_ARGS "FORWARD_CONFIG" "INSTALL_DIR;BUILD_COMMAND;INSTALL_COMMAND" "CMAKE_ARGS" ${ARGN})
+    cmake_parse_arguments(P_ARGS "FORWARD_CONFIG" "INSTALL_DIR;BUILD_COMMAND;INSTALL_COMMAND;SOURCE_DIR" "CMAKE_ARGS" ${ARGN})

    # MSVC is true for clang-cl as well, so the sub-build toolchain has to key on the
    # generator. A non-Visual-Studio superbuild passes its own generator down, and with
@@ -202,12 +202,18 @@ function(orcaslicer_add_cmake_project projectname)
      set(_build_j "-j${NPROC}")
    endif ()

+    set(_source_dir_arg "")
+    if (P_ARGS_SOURCE_DIR)
+        set(_source_dir_arg SOURCE_DIR ${P_ARGS_SOURCE_DIR})
+    endif ()
+
 if (NOT IS_CROSS_COMPILE OR NOT APPLE)
    ExternalProject_Add(
        dep_${projectname}
        EXCLUDE_FROM_ALL    ON
        INSTALL_DIR         ${DESTDIR}
        DOWNLOAD_DIR        ${DEP_DOWNLOAD_DIR}/${projectname}
+        ${_source_dir_arg}
        ${_gen}
        CMAKE_ARGS
            -DCMAKE_POLICY_VERSION_MINIMUM=3.5
@@ -240,12 +246,14 @@ if (NOT IS_CROSS_COMPILE OR NOT APPLE)
        # note for future devs: shared libs may actually create a size reduction
        # but orcaslicer_deps tends to get really funny regarding linking after that (notably boost)
        # so, as much as I would like to use that, it's not happening
-        ExternalProject_Add_Step(dep_${projectname} free_download_space
-                DEPENDEES download # do after download
-                COMMENT "Freeing Space: Removing source archive"
-                WORKING_DIRECTORY ${DEP_DOWNLOAD_DIR}
-                COMMAND ${CMAKE_COMMAND} -E rm -r ${projectname}
-        )
+        if (NOT P_ARGS_SOURCE_DIR)
+            ExternalProject_Add_Step(dep_${projectname} free_download_space
+                    DEPENDEES download # do after download
+                    COMMENT "Freeing Space: Removing source archive"
+                    WORKING_DIRECTORY ${DEP_DOWNLOAD_DIR}
+                    COMMAND ${CMAKE_COMMAND} -E rm -rf ${projectname}
+            )
+        endif ()
        ExternalProject_Add_Step(dep_${projectname} free_build_space
                DEPENDEES install # do after install
                COMMENT "Freeing Space: Removing source and build files"
@@ -259,6 +267,7 @@ else()
        EXCLUDE_FROM_ALL    ON
        INSTALL_DIR         ${DESTDIR}
        DOWNLOAD_DIR        ${DEP_DOWNLOAD_DIR}/${projectname}
+        ${_source_dir_arg}
        ${_gen}
        CMAKE_ARGS
            -DCMAKE_POLICY_VERSION_MINIMUM=3.5
@@ -386,10 +395,6 @@ include(libnoise/libnoise.cmake)

 include(Draco/Draco.cmake)

-include(FFMPEG/FFMPEG.cmake)
-include(Assimp/Assimp.cmake)
-
-
 # I *think* 1.1 is used for *just* md5 hashing?
 # 3.1 has everything in the right place, but the md5 funcs used are deprecated
 # a grep across the repo shows it is used for other things
@@ -400,6 +405,12 @@ if(NOT OPENSSL_FOUND)
    set(OPENSSL_PKG dep_OpenSSL)
 endif()

+include(FFMPEG/FFMPEG.cmake)
+include(Assimp/Assimp.cmake)
+
+include(DataChannel/DataChannel.cmake)
+set(DATACHANNEL_PKG dep_DataChannel)
+
 # we don't want to load a "wrong" openssl when loading curl
 # so, just don't even bother
 # ...i think this is how it works? change if wrong
@@ -473,6 +484,7 @@ set(_dep_list
    dep_wxInspector
    dep_FFMPEG
    dep_Assimp
+    ${DATACHANNEL_PKG}
    )

 if (MSVC)
@@ -0,0 +1,37 @@
+# libdatachannel is the native ICE/DTLS/SCTP implementation used by the
+# GUI WebRTC camera controller. Keep the source revision fixed: the signaling
+# protocol is evolving independently of this transport dependency.
+#
+# It vendors plog, usrsctp and libjuice as git submodules, which a plain
+# GitHub tag tarball does not include. The flatpak sandbox has no network
+# access during the build, so there the manifest itself clones the repo
+# (submodules and all) into the dependency download directory before the
+# sandbox closes. ExternalProject_Add is pointed at that existing checkout
+# instead of being given its own network-dependent download method.
+if (FLATPAK)
+    set(_datachannel_source
+        SOURCE_DIR ${DEP_DOWNLOAD_DIR}/DataChannel
+    )
+else()
+    set(_datachannel_source
+        GIT_REPOSITORY https://github.com/paullouisageneau/libdatachannel.git
+        GIT_TAG v0.24.5
+        GIT_SHALLOW ON
+        GIT_SUBMODULES_RECURSE ON
+    )
+endif()
+
+orcaslicer_add_cmake_project(DataChannel
+    DEPENDS ${OPENSSL_PKG}
+    CMAKE_ARGS
+        -DNO_EXAMPLES=ON
+        -DNO_TESTS=ON
+        -DNO_WEBSOCKET=ON
+        -DNO_MEDIA=ON
+        -DUSE_NICE=OFF
+        -DUSE_SYSTEM_JUICE=OFF
+        -DUSE_SYSTEM_USRSCTP=OFF
+        -DOPENSSL_ROOT_DIR:PATH=${DESTDIR}
+        -DOPENSSL_USE_STATIC_LIBS=ON
+    ${_datachannel_source}
+)
@@ -1,14 +1,26 @@
 set(_conf_cmd ./configure)

+set(_ffmpeg_depends)
+set(_ffmpeg_configure_command ${_conf_cmd})
+if (TARGET dep_OpenSSL)
+    set(_ffmpeg_depends DEPENDS dep_OpenSSL)
+    set(_ffmpeg_configure_command
+        ${CMAKE_COMMAND} -E env
+        "PKG_CONFIG_PATH=${DESTDIR}/lib/pkgconfig:$ENV{PKG_CONFIG_PATH}"
+        ${_conf_cmd}
+    )
+endif()
+
 if (MSVC)
    set(_source_dir "${CMAKE_BINARY_DIR}/dep_FFMPEG-prefix/src/dep_FFMPEG")

-    set(PREBUILD_URL_arm64 "https://github.com/Noisyfox/FFmpeg-Builds-Orca/releases/download/autobuild-2026-07-17-14-28/ffmpeg-n7.0.3-31-g9b6ffd74b5-winarm64-orca-shared-7.0.zip")
-    set(PREBUILD_HASH_arm64 "12f4140279f2f8469885e1b5b2e8be9d788882914c21523cacd56989f3548054")
-    set(PREBUILD_URL_x64 "https://github.com/Noisyfox/FFmpeg-Builds-Orca/releases/download/autobuild-2026-07-17-14-28/ffmpeg-n7.0.3-31-g9b6ffd74b5-win64-orca-shared-7.0.zip")
-    set(PREBUILD_HASH_x64 "e65916020ddb9ef84b2666dfbcbfc9b1d67f69d15b4a66db53754637bf2d498c")
+    set(PREBUILD_URL_arm64 "https://github.com/Noisyfox/FFmpeg-Builds-Orca/releases/download/autobuild-2026-09-18-16-50/ffmpeg-n7.0.3-33-g887d4b4919-winarm64-orca-shared-7.0.zip")
+    set(PREBUILD_HASH_arm64 "da480cbb39680056de824c57ec4dc3bd577b479ebbc310ff1f9dc55cf014b4c1")
+    set(PREBUILD_URL_x64 "https://github.com/Noisyfox/FFmpeg-Builds-Orca/releases/download/autobuild-2026-09-18-16-50/ffmpeg-n7.0.3-33-g887d4b4919-win64-orca-shared-7.0.zip")
+    set(PREBUILD_HASH_x64 "85da19daf198f5548259d8aabb349db84997a3f6e6886d8d7764114add9c6dae")

    ExternalProject_Add(dep_FFMPEG
+        ${_ffmpeg_depends}
        URL ${PREBUILD_URL_${DEPS_ARCH}}
        URL_HASH SHA256=${PREBUILD_HASH_${DEPS_ARCH}}
        DOWNLOAD_DIR ${DEP_DOWNLOAD_DIR}/FFMPEG
@@ -21,6 +33,8 @@ if (MSVC)
    )

 else ()
+    set(_openssl_cmd --enable-openssl)
+
    if (APPLE)
        set(_minos_cmd
            "--extra-cflags=-mmacosx-version-min=${DEP_OSX_TARGET}"
@@ -52,10 +66,11 @@ else ()
    endif()

    ExternalProject_Add(dep_FFMPEG
+        ${_ffmpeg_depends}
        URL https://github.com/FFmpeg/FFmpeg/archive/refs/tags/n7.0.3.tar.gz
        URL_HASH SHA256=DEEDCABE339165214A3637DF4C86A507AEF0D793CF8774FF68735F4737E8DDBC
        DOWNLOAD_DIR ${DEP_DOWNLOAD_DIR}/FFMPEG
-        CONFIGURE_COMMAND ${_conf_cmd}
+        CONFIGURE_COMMAND ${_ffmpeg_configure_command}
            ${_cross_cmd}
            ${_pic_cmd}
            ${_arch_cmd}
@@ -63,20 +78,21 @@ else ()
            "--prefix=${DESTDIR}"
            ${_link_cmd}
            ${_minos_cmd}
+            ${_openssl_cmd}
            --disable-doc
            --enable-small
            --disable-outdevs
            --disable-filters
            --enable-filter=*null*,afade,*fifo,*format,*resample,aeval,allrgb,allyuv,atempo,pan,*bars,color,*key,crop,draw*,eq*,framerate,*_qsv,*_vaapi,*v4l2*,hw*,scale,volume,test*
            --disable-protocols
-            --enable-protocol=file,fd,pipe,rtp,udp
+            --enable-protocol=file,fd,pipe,http,https,rtp,tcp,udp
            --disable-muxers
            --enable-muxer=rtp
            --disable-encoders
            --disable-decoders
            --enable-decoder=*aac*,h264*,mp3*,mjpeg,rv*
            --disable-demuxers
-            --enable-demuxer=h264,mp3,mov
+            --enable-demuxer=h264,mp3,mov,mpjpeg,rtsp,sdp
            --disable-zlib
            --disable-avdevice
        BUILD_IN_SOURCE ON
@@ -0,0 +1,240 @@
+# Printer agents
+
+Printer agents isolate printer-specific communication from the rest of OrcaSlicer. The GUI and
+`DeviceManager` operate on a shared set of printer operations and device state; a selected printer
+agent implements those operations for a particular printer ecosystem. The agent boundary allows
+Bambu, Moonraker-based printers, built-in integrations, and Python-provided integrations to use the
+same application workflow without making the GUI understand every printer protocol.
+
+The current boundary is an adapter boundary around the existing application contract. In particular,
+some request fields and message payloads still use the Bambu-shaped representation that existing
+`MachineObject` and `DeviceManager` code consumes. The printer agent is responsible for translating
+that representation into the protocol spoken by its printer. This is an intentional compatibility
+constraint of the current design; the interface is not yet a neutral printer protocol.
+
+The v1 dialect migration path is deliberately narrow. `DeviceManager` currently speaks the Bambu JSON
+dialect because that is the payload shape already used throughout the command and state workflow. The
+v1 `OrcaPrinterAgent` also accepts that Bambu dialect. Its transport path places the small translation
+needed for the target printer at `deliver_to_sink`, keeping the compatibility code at the edge rather
+than spreading it through `DeviceManager` or the agent interface.
+
+The eventual direction is for `DeviceManager` to produce an Orca JSON dialect. The Bambu agent will then
+own the translation from Orca JSON to Bambu's protocol, while `OrcaPrinterAgent` can forward the Orca
+payload directly to its sink. The v1 translation at `deliver_to_sink` can then be removed without
+changing `DeviceManager`, the command callers, or the rest of the agent workflow.
+
+## Components
+
+The system has four relevant layers:
+
+```text
+GUI / DeviceManager / MachineObject
+              |
+        NetworkAgent
+          /       \
+ IPrinterAgent   ICloudServiceAgent
+      |                 |
+ printer protocol   authentication and cloud services
+```
+
+### `DeviceManager` and `MachineObject`
+
+`DeviceManager` owns the application-facing printer workflow. It maintains `MachineObject` instances,
+updates their state, filters devices for the active printer agent, and initiates operations such as
+homing, temperature changes, printing, subscriptions, and camera playback.
+
+`MachineObject` remains the shared state model used by the GUI. It does not contain the implementation
+of a printer protocol. When a device is discovered or returned by a cloud query, the device is tagged
+with the active `printer_agent_id`. Device lists and selected-machine operations use that tag to avoid
+sending an operation through an agent that does not own the device.
+
+### `NetworkAgent`
+
+`NetworkAgent` is the façade used by the GUI and `DeviceManager`. It owns:
+
+- the currently selected `IPrinterAgent`;
+- the registered cloud-service instances, indexed by provider;
+- callbacks shared by the active printer agent and the application;
+- the forwarding methods for printer commands and cloud operations.
+
+There is one active printer agent for the currently selected printer preset. Switching the preset
+increments the machine-list generation, disconnects the old printer agent, removes its callbacks, and
+installs the newly selected agent. The façade then forwards printer operations to that agent.
+
+Cloud operations are selected separately using a provider key. `NetworkAgent` forwards a cloud request
+to the matching `ICloudServiceAgent`, and forwards cloud camera operations with a device ID. The
+printer agent receives a cloud-agent pointer through `set_cloud_agent()` when it is created, allowing
+printer communication to obtain cloud tokens without depending on a concrete cloud implementation.
+
+### `IPrinterAgent`
+
+`IPrinterAgent` is the printer-facing contract. It covers:
+
+- cloud-relay and direct-LAN message delivery;
+- LAN connection, discovery, binding, and certificates;
+- printer subscriptions and callbacks;
+- print operations;
+- filament synchronization;
+- camera capability and local camera URL reporting;
+- printer command methods.
+
+Concrete built-in implementations include the Bambu wrapper, the native Orca/Moonraker path, and
+other printer-agent implementations registered by the application. A printer agent may use either
+the cloud agent, a direct LAN connection, or both.
+
+### `ICloudServiceAgent`
+
+`ICloudServiceAgent` owns authentication and services provided by a cloud backend. It covers login
+state, tokens, user and printer lists, settings synchronization, model services, cloud messages, and
+cloud camera operations.
+
+Cloud camera operations are device-scoped:
+
+- `get_camera_url(dev_id, callback)` obtains a stream URL for one device;
+- `create_camera_signaling_channel(dev_id)` creates signaling for one device where the provider
+  supports it.
+
+This is separate from the local camera URL exposed by `IPrinterAgent`, which is currently scoped to
+the active printer agent because a normal LAN agent represents one physical printer connection.
+
+## Agent registration and selection
+
+`NetworkAgentFactory` maintains the printer-agent registry. Each registry entry contains an agent ID,
+a display name, and a factory function. Built-in agents register during application initialization.
+Python printer-agent capabilities register dynamically and contribute an agent ID and factory entry.
+
+The selected printer preset contains the printer-agent choice. If no explicit choice is stored, the
+application preserves the existing default behavior: Bambu presets select the Bambu agent and other
+presets select the native Orca agent. When a preset is changed, `GUI_App` resolves the effective agent
+ID, obtains the corresponding cloud agent, creates the printer agent through the registry, and installs
+it in `NetworkAgent`.
+
+The registry rejects conflicting agent IDs. This matters for Python plugins because an agent ID is the
+stable identity used by presets and device ownership; two enabled plugin capabilities must not claim
+the same ID.
+
+## Message and command flow
+
+There are two low-level message paths:
+
+- `send_message()` publishes a command through the printer's cloud relay;
+- `send_message_to_printer()` sends a command directly to the printer over the LAN path.
+
+Both paths accept a JSON string, quality-of-service and flag values, and return the existing network
+status code domain. The agent owns the conversion from that JSON contract to its native transport.
+
+The typed `command_*` methods are the application-facing convenience layer. The five generic defaults
+currently implemented by `IPrinterAgent` construct the existing JSON dialect and route through the
+same message path:
+
+| Method | Default operation |
+| --- | --- |
+| `command_xyz_abs()` | Send `G90` for absolute positioning |
+| `command_auto_leveling()` | Send `G29` for bed leveling |
+| `command_go_home()` | Use the supported homing operation or send `G28` |
+| `command_set_bed()` | Use the supported bed control or send `M140` |
+| `command_set_nozzle()` | Send `M104` for nozzle temperature |
+
+These are compatibility defaults for common printer workflows, not a guarantee that every firmware
+implements every command identically. An agent can override a method when its protocol needs another
+operation. For example, a Klipper configuration may use `BED_MESH_CALIBRATE` instead of `G29`.
+
+The remaining common command methods default to `ORCA_NETWORK_ERR_CMD_NOT_SUPPORTED` because their
+existing behavior is vendor-specific or has no portable implementation:
+
+- AMS RFID refresh;
+- AMS calibration;
+- AMS tray selection;
+- camera start;
+- axis control.
+
+The methods remain on the common interface so an agent that supports them can override them explicitly.
+`sequence_id` remains part of the command contract because `DeviceManager` creates and tracks it as
+the command ID.
+
+## Device ownership and stale responses
+
+Printer-agent ownership is represented by `printer_agent_id` on device records and `MachineObject`
+instances. The active agent ID is attached when a device is discovered, returned by a cloud list, or
+reused after a preset switch. Local-machine configuration also persists the agent ID so a saved LAN
+device is not silently reused by an unrelated agent.
+
+Cloud printer-list responses carry three pieces of request context added by `NetworkAgent`:
+
+```text
+provider   cloud provider used for the request
+agent_id   active printer agent when the request was made
+generation machine-list generation when the request was made
+```
+
+`DeviceManager` accepts the response only when those values still match the current provider, active
+agent, and generation. This prevents a slow response from the previous preset or provider from
+repopulating the current device list.
+
+The provider mapping is currently selected by `GUI_App`: the Bambu agent maps to the Bambu cloud
+provider and other agents map to the Orca cloud provider. The generation check protects that existing
+selection from races; it does not make cloud-provider ownership intrinsic to an agent. Cloud-printer
+ownership and the broader Orca cloud services are therefore still separate architectural concerns.
+
+## Python printer agents
+
+`PrinterAgentPluginCapability` implements `IPrinterAgent` directly. The live capability object is
+registered with `NetworkAgentFactory` and handed out as the printer agent when its agent ID is selected.
+The plugin receives the selected `ICloudServiceAgent` through `set_cloud_agent()` just like a built-in
+printer agent.
+
+Python plugins must implement the core communication and lifecycle methods required by the interface,
+including agent metadata, printer connection, discovery callbacks, and the two message-send methods.
+Methods that are meaningful only to a particular printer are optional overrides where the C++ base
+class provides a default.
+
+All ten `command_*` methods are available in the Python binding and in the trampoline. Their override
+status is intentionally optional:
+
+- the five generic commands use the C++ default when Python does not override them;
+- the five vendor-specific commands return `NOT_SUPPORTED` unless Python supplies an implementation;
+- a Python implementation can replace either behavior for its own protocol.
+
+The Python camera binding exposes HTTP, HTTPS, RTSP, and HTTP-snapshot modes. WebRTC remains a
+built-in C++ camera mode, but is not exposed as a Python mode because the current Python capability
+does not provide the corresponding cloud signaling-channel contract.
+
+## Camera playback boundary
+
+The camera stream mode describes how a stream is obtained; it does not by itself define ownership of
+the wxWidgets view that renders it. `MediaPlayCtrl` selects and tears down the active backend, while
+the wx parent owns the child window or renderer. This is important because a web view, native media
+control, and frame-based/WebRTC renderer have different wx window-lifetime requirements.
+
+Cloud URL and signaling requests are routed through `NetworkAgent` to the cloud provider selected for
+the device. Local URL requests are routed to the active printer agent. The distinction keeps cloud
+account services device-scoped while preserving the current one-LAN-agent/one-printer model.
+
+## Compatibility constraints
+
+The printer-agent boundary intentionally preserves several existing application contracts:
+
+- Bambu-shaped JSON is still the shared command representation;
+- existing network status codes are reused, with Orca-specific unsupported/capability errors added
+  in the Orca-reserved range;
+- `MachineObject` remains the shared device-state model;
+- preset and local-machine data retain compatibility with the existing agent-selection behavior;
+- Python plugins use the existing capability and pybind11 registration system.
+
+The agent abstraction is therefore responsible for containing vendor differences, not for pretending
+that all vendor protocols are identical. The planned Orca JSON dialect is the protocol-neutral command
+model for the `DeviceManager`/agent boundary. Once it is introduced, Bambu-specific translation remains
+inside the Bambu agent and the Orca agent's v1 sink adapter can be removed as a self-contained cleanup.
+
+## Main implementation locations
+
+- [`IPrinterAgent`](../../src/slic3r/Utils/IPrinterAgent.hpp) — printer-agent contract and generic command defaults
+- [`ICloudServiceAgent`](../../src/slic3r/Utils/ICloudServiceAgent.hpp) — cloud service and per-device
+  cloud camera contract
+- [`NetworkAgent`](../../src/slic3r/Utils/NetworkAgent.hpp) — façade and dispatch between active agents
+- [`NetworkAgentFactory`](../../src/slic3r/Utils/NetworkAgentFactory.hpp) — built-in and Python agent registry
+- [`DeviceManager`](../../src/slic3r/GUI/DeviceCore/DevManager.cpp) — device ownership, filtering, and
+  stale-response checks
+- [`PrinterAgentPluginCapability`](../../src/slic3r/plugin/pluginTypes/printerAgent/PrinterAgentPluginCapability.cpp)
+  — Python bindings
+- [`MediaPlayCtrl`](../../src/slic3r/GUI/MediaPlayCtrl.cpp) — camera backend selection and playback lifecycle
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 12:39+0800\n"
+"POT-Creation-Date: 2026-09-22 17:02+0800\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -6161,9 +6161,6 @@ msgstr ""
 msgid "Preferences"
 msgstr ""

-msgid "Open speed dial"
-msgstr ""
-
 msgctxt "Menu"
 msgid "Edit"
 msgstr ""
@@ -6171,6 +6168,9 @@ msgstr ""
 msgid "View"
 msgstr ""

+msgid "Open Speed Dial"
+msgstr ""
+
 msgid "Preset Bundle"
 msgstr ""

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 12:39+0800\n"
+"POT-Creation-Date: 2026-09-22 17:02+0800\n"
 "PO-Revision-Date: 2025-03-15 10:55+0100\n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -6637,9 +6637,6 @@ msgstr "Mostrar el contorn al voltant de l'objecte seleccionat a l'escena 3D"
 msgid "Preferences"
 msgstr "Preferències"

-msgid "Open speed dial"
-msgstr ""
-
 # AI Translated
 msgctxt "Menu"
 msgid "Edit"
@@ -6648,6 +6645,9 @@ msgstr "Edita"
 msgid "View"
 msgstr "Vista"

+msgid "Open Speed Dial"
+msgstr ""
+
 # AI Translated
 msgid "Preset Bundle"
 msgstr "Paquet de perfils"
@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 12:39+0800\n"
+"POT-Creation-Date: 2026-09-22 17:02+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: Jakub Hencl\n"
 "Language-Team: \n"
@@ -6602,9 +6602,6 @@ msgstr "Zobrazit obrys kolem vybraného objektu ve 3D scéně."
 msgid "Preferences"
 msgstr "Předvolby"

-msgid "Open speed dial"
-msgstr ""
-
 # AI Translated
 msgctxt "Menu"
 msgid "Edit"
@@ -6613,6 +6610,9 @@ msgstr "Upravit"
 msgid "View"
 msgstr "Zobrazit"

+msgid "Open Speed Dial"
+msgstr ""
+
 msgid "Preset Bundle"
 msgstr "Balík předvoleb"

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 12:39+0800\n"
+"POT-Creation-Date: 2026-09-22 17:02+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: Heiko Liebscher <hliebschergmail.com>\n"
 "Language-Team: \n"
@@ -6490,9 +6490,6 @@ msgstr "Kontur um das ausgewählte Objekt in der 3D-Szene anzeigen."
 msgid "Preferences"
 msgstr "Einstellungen"

-msgid "Open speed dial"
-msgstr ""
-
 # AI Translated
 msgctxt "Menu"
 msgid "Edit"
@@ -6501,6 +6498,9 @@ msgstr "Bearbeiten"
 msgid "View"
 msgstr "Ansicht"

+msgid "Open Speed Dial"
+msgstr ""
+
 msgid "Preset Bundle"
 msgstr "Vorlagen-Bundle"

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 12:39+0800\n"
+"POT-Creation-Date: 2026-09-22 17:02+0800\n"
 "PO-Revision-Date: 2026-06-17 15:44-0300\n"
 "Last-Translator: Alexandre Folle de Menezes\n"
 "Language-Team: \n"
@@ -6157,9 +6157,6 @@ msgstr ""
 msgid "Preferences"
 msgstr ""

-msgid "Open speed dial"
-msgstr ""
-
 msgctxt "Menu"
 msgid "Edit"
 msgstr ""
@@ -6167,6 +6164,9 @@ msgstr ""
 msgid "View"
 msgstr ""

+msgid "Open Speed Dial"
+msgstr ""
+
 msgid "Preset Bundle"
 msgstr ""

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 12:39+0800\n"
+"POT-Creation-Date: 2026-09-22 17:02+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: Ian A. Bassi <>\n"
 "Language-Team: \n"
@@ -6346,9 +6346,6 @@ msgstr "Mostrar el contorno alrededor del objeto seleccionado en la escena 3D."
 msgid "Preferences"
 msgstr "Preferencias"

-msgid "Open speed dial"
-msgstr ""
-
 msgctxt "Menu"
 msgid "Edit"
 msgstr "Edición"
@@ -6356,6 +6353,9 @@ msgstr "Edición"
 msgid "View"
 msgstr "Vista"

+msgid "Open Speed Dial"
+msgstr ""
+
 msgid "Preset Bundle"
 msgstr "Paquete de perfiles"

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 12:39+0800\n"
+"POT-Creation-Date: 2026-09-22 17:02+0800\n"
 "PO-Revision-Date: 2026-07-20 13:33+0200\n"
 "Last-Translator: Manu Goiogana <mgoiogana@gmail.com>\n"
 "Language-Team: \n"
@@ -6392,9 +6392,6 @@ msgstr "Erakutsi hautatutako objektuaren inguruko ingerada 3D eszenan."
 msgid "Preferences"
 msgstr "Hobespenak"

-msgid "Open speed dial"
-msgstr ""
-
 # AI Translated
 msgctxt "Menu"
 msgid "Edit"
@@ -6403,6 +6400,9 @@ msgstr "Editatu"
 msgid "View"
 msgstr "Bista"

+msgid "Open Speed Dial"
+msgstr ""
+
 msgid "Preset Bundle"
 msgstr "Aurrezarpen-paketea"

@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 12:39+0800\n"
+"POT-Creation-Date: 2026-09-22 17:02+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: Guislain Cyril, Thomas Lété\n"
@@ -6439,9 +6439,6 @@ msgstr "Afficher le tracé contour de l’objet sélectionné dans la scène 3D.
 msgid "Preferences"
 msgstr "Préférences"

-msgid "Open speed dial"
-msgstr ""
-
 # AI Translated
 msgctxt "Menu"
 msgid "Edit"
@@ -6450,6 +6447,9 @@ msgstr "Édition"
 msgid "View"
 msgstr "Affichage"

+msgid "Open Speed Dial"
+msgstr ""
+
 msgid "Preset Bundle"
 msgstr "Paquet de préréglages"

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 12:39+0800\n"
+"POT-Creation-Date: 2026-09-22 17:02+0800\n"
 "Language: hu\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -6541,9 +6541,6 @@ msgstr "Körvonal megjelenítése a kijelölt objektum körül a 3D nézetben."
 msgid "Preferences"
 msgstr "Beállítások"

-msgid "Open speed dial"
-msgstr ""
-
 # AI Translated
 msgctxt "Menu"
 msgid "Edit"
@@ -6552,6 +6549,9 @@ msgstr "Szerkesztés"
 msgid "View"
 msgstr "Nézet"

+msgid "Open Speed Dial"
+msgstr ""
+
 msgid "Preset Bundle"
 msgstr "Beállításcsomag"

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 12:39+0800\n"
+"POT-Creation-Date: 2026-09-22 17:02+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -6543,9 +6543,6 @@ msgstr "Mostra il contorno attorno all'oggetto selezionato nella scena 3D."
 msgid "Preferences"
 msgstr "Preferenze"

-msgid "Open speed dial"
-msgstr ""
-
 # AI Translated
 msgctxt "Menu"
 msgid "Edit"
@@ -6554,6 +6551,9 @@ msgstr "Modifica"
 msgid "View"
 msgstr "Vista"

+msgid "Open Speed Dial"
+msgstr ""
+
 msgid "Preset Bundle"
 msgstr "Pacchetto profili"

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 12:39+0800\n"
+"POT-Creation-Date: 2026-09-22 17:02+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -6553,9 +6553,6 @@ msgstr "3Dシーンで選択したオブジェクトの周りにアウトライ
 msgid "Preferences"
 msgstr "設定"

-msgid "Open speed dial"
-msgstr ""
-
 # AI Translated
 msgctxt "Menu"
 msgid "Edit"
@@ -6564,6 +6561,9 @@ msgstr "編集"
 msgid "View"
 msgstr "表示"

+msgid "Open Speed Dial"
+msgstr ""
+
 # AI Translated
 msgid "Preset Bundle"
 msgstr "プリセットバンドル"
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 12:39+0800\n"
+"POT-Creation-Date: 2026-09-22 17:02+0800\n"
 "PO-Revision-Date: 2025-06-02 17:12+0900\n"
 "Last-Translator: crwusiz <crwusiz@gmail.com>\n"
 "Language-Team: \n"
@@ -6566,9 +6566,6 @@ msgstr "3D 장면에서 선택한 객체 주변에 윤곽선 표시"
 msgid "Preferences"
 msgstr "기본 설정"

-msgid "Open speed dial"
-msgstr ""
-
 # AI Translated
 msgctxt "Menu"
 msgid "Edit"
@@ -6577,6 +6574,9 @@ msgstr "편집"
 msgid "View"
 msgstr "시점"

+msgid "Open Speed Dial"
+msgstr ""
+
 # AI Translated
 msgid "Preset Bundle"
 msgstr "사전 설정 번들"
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 12:39+0800\n"
+"POT-Creation-Date: 2026-09-22 17:02+0800\n"
 "PO-Revision-Date: 2026-07-02 14:13+0300\n"
 "Last-Translator: Gintaras Kučinskas <sharanchius@gmail.com>\n"
 "Language-Team: \n"
@@ -6528,9 +6528,6 @@ msgstr "Rodyti kontūrą aplink pasirinktą objektą 3D scenoje."
 msgid "Preferences"
 msgstr "Parinktys"

-msgid "Open speed dial"
-msgstr ""
-
 # AI Translated
 msgctxt "Menu"
 msgid "Edit"
@@ -6539,6 +6536,9 @@ msgstr "Redaguoti"
 msgid "View"
 msgstr "Vaizdas"

+msgid "Open Speed Dial"
+msgstr ""
+
 msgid "Preset Bundle"
 msgstr "Profilių rinkinys"

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 12:39+0800\n"
+"POT-Creation-Date: 2026-09-22 17:02+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -7122,9 +7122,6 @@ msgstr "Toon een omtrek rond het geselecteerde object in de 3D-scène."
 msgid "Preferences"
 msgstr "Voorkeuren"

-msgid "Open speed dial"
-msgstr ""
-
 # AI Translated
 msgctxt "Menu"
 msgid "Edit"
@@ -7133,6 +7130,9 @@ msgstr "Bewerken"
 msgid "View"
 msgstr "Weergave"

+msgid "Open Speed Dial"
+msgstr ""
+
 # AI Translated
 msgid "Preset Bundle"
 msgstr "Voorinstellingenbundel"
@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: OrcaSlicer 2.3.0-rc\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 12:39+0800\n"
+"POT-Creation-Date: 2026-09-22 17:02+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: Krzysztof Morga <<tlumaczeniebs@gmail.com>>\n"
 "Language-Team: \n"
@@ -6689,9 +6689,6 @@ msgstr "Przełącza wyświetlanie konturu wokół zaznaczonego obiektu w scenie
 msgid "Preferences"
 msgstr "Preferencje"

-msgid "Open speed dial"
-msgstr ""
-
 # AI Translated
 msgctxt "Menu"
 msgid "Edit"
@@ -6700,6 +6697,9 @@ msgstr "Edycja"
 msgid "View"
 msgstr "Widok"

+msgid "Open Speed Dial"
+msgstr ""
+
 # AI Translated
 msgid "Preset Bundle"
 msgstr "Pakiet profili"
@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 12:39+0800\n"
+"POT-Creation-Date: 2026-09-22 17:02+0800\n"
 "PO-Revision-Date: 2026-07-26 11:14-0300\n"
 "Last-Translator: Alexandre Folle de Menezes\n"
 "Language-Team: Portuguese, Brazilian\n"
@@ -6363,9 +6363,6 @@ msgstr "Mostrar contorno ao redor do objeto selecionado na cena 3D."
 msgid "Preferences"
 msgstr "Preferências"

-msgid "Open speed dial"
-msgstr ""
-
 msgctxt "Menu"
 msgid "Edit"
 msgstr "Editar"
@@ -6373,6 +6370,9 @@ msgstr "Editar"
 msgid "View"
 msgstr "Visualizar"

+msgid "Open Speed Dial"
+msgstr ""
+
 msgid "Preset Bundle"
 msgstr "Pacote de Predefinições"

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: OrcaSlicer V2.5.0\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 12:39+0800\n"
+"POT-Creation-Date: 2026-09-22 17:02+0800\n"
 "PO-Revision-Date: 2026-02-25 13:38+0300\n"
 "Last-Translator: Felix14_v2\n"
 "Language-Team: Felix14_v2 (ДС/ТГ: @felix14_v2, почта: aleks111001@list.ru), Andylg <andylg@yandex.ru>\n"
@@ -6597,9 +6597,6 @@ msgstr "Отображение контура вокруг выбранных м
 msgid "Preferences"
 msgstr "Настройки"

-msgid "Open speed dial"
-msgstr ""
-
 msgctxt "Menu"
 msgid "Edit"
 msgstr "Правка"
@@ -6607,6 +6604,9 @@ msgstr "Правка"
 msgid "View"
 msgstr "Вид"

+msgid "Open Speed Dial"
+msgstr ""
+
 msgid "Preset Bundle"
 msgstr "Пакет профилей"

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 12:39+0800\n"
+"POT-Creation-Date: 2026-09-22 17:02+0800\n"
 "Language: sv\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -7205,9 +7205,6 @@ msgstr "Visa en kontur runt det markerade objektet i 3D-scenen."
 msgid "Preferences"
 msgstr "Inställningar"

-msgid "Open speed dial"
-msgstr ""
-
 # AI Translated
 msgctxt "Menu"
 msgid "Edit"
@@ -7216,6 +7213,9 @@ msgstr "Redigera"
 msgid "View"
 msgstr "Vy"

+msgid "Open Speed Dial"
+msgstr ""
+
 # AI Translated
 msgid "Preset Bundle"
 msgstr "Förinställningspaket"
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 12:39+0800\n"
+"POT-Creation-Date: 2026-09-22 17:02+0800\n"
 "PO-Revision-Date: 2026-06-19 13:40+0700\n"
 "Last-Translator: Icezaza\n"
 "Language-Team: Thai\n"
@@ -6520,9 +6520,6 @@ msgstr "แสดงเค้าร่างรอบๆ วัตถุที
 msgid "Preferences"
 msgstr "การตั้งค่า"

-msgid "Open speed dial"
-msgstr ""
-
 # AI Translated
 msgctxt "Menu"
 msgid "Edit"
@@ -6531,6 +6528,9 @@ msgstr "แก้ไข"
 msgid "View"
 msgstr "มุมมอง"

+msgid "Open Speed Dial"
+msgstr ""
+
 msgid "Preset Bundle"
 msgstr "ชุดที่ตั้งไว้ล่วงหน้า"

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 12:39+0800\n"
+"POT-Creation-Date: 2026-09-22 17:02+0800\n"
 "PO-Revision-Date: 2026-08-21 23:18+0300\n"
 "Last-Translator: GlauTech\n"
 "Language-Team: \n"
@@ -6588,9 +6588,6 @@ msgstr "3D sahnede seçilen nesnenin etrafındaki ana hatları göster."
 msgid "Preferences"
 msgstr "Tercihler"

-msgid "Open speed dial"
-msgstr ""
-
 # AI Translated
 msgctxt "Menu"
 msgid "Edit"
@@ -6599,6 +6596,9 @@ msgstr "Düzen"
 msgid "View"
 msgstr "Görünüm"

+msgid "Open Speed Dial"
+msgstr ""
+
 msgid "Preset Bundle"
 msgstr "Ön ayar paketi"

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: orcaslicerua\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 12:39+0800\n"
+"POT-Creation-Date: 2026-09-22 17:02+0800\n"
 "PO-Revision-Date: 2026-07-17 16:25+0300\n"
 "Last-Translator: Andrij Mizyk <andm1zyk@proton.me>\n"
 "Language-Team: Ukrainian\n"
@@ -6557,9 +6557,6 @@ msgstr "Показувати контур навколо виділеного о
 msgid "Preferences"
 msgstr "Налаштування"

-msgid "Open speed dial"
-msgstr ""
-
 # AI Translated
 msgctxt "Menu"
 msgid "Edit"
@@ -6568,6 +6565,9 @@ msgstr "Редагування"
 msgid "View"
 msgstr "Вигляд"

+msgid "Open Speed Dial"
+msgstr ""
+
 msgid "Preset Bundle"
 msgstr "Набір пресетів"

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 12:39+0800\n"
+"POT-Creation-Date: 2026-09-22 17:02+0800\n"
 "PO-Revision-Date: 2025-10-02 17:43+0700\n"
 "Last-Translator: \n"
 "Language-Team: hainguyen.ts13@gmail.com\n"
@@ -6907,9 +6907,6 @@ msgstr "Hiện đường viền xung quanh vật thể đã chọn trong cảnh
 msgid "Preferences"
 msgstr "Tùy chọn"

-msgid "Open speed dial"
-msgstr ""
-
 # AI Translated
 msgctxt "Menu"
 msgid "Edit"
@@ -6918,6 +6915,9 @@ msgstr "Chỉnh sửa"
 msgid "View"
 msgstr "Xem"

+msgid "Open Speed Dial"
+msgstr ""
+
 # AI Translated
 msgid "Preset Bundle"
 msgstr "Gói cài đặt sẵn"
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Slic3rPE\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 12:39+0800\n"
+"POT-Creation-Date: 2026-09-22 17:02+0800\n"
 "PO-Revision-Date: 2026-06-11 12:37-0300\n"
 "Last-Translator: Handle <mail@bysb.net>\n"
 "Language-Team: \n"
@@ -6375,9 +6375,6 @@ msgstr "在3D场景中显示选中对象的轮廓"
 msgid "Preferences"
 msgstr "偏好设置"

-msgid "Open speed dial"
-msgstr ""
-
 # AI Translated
 msgctxt "Menu"
 msgid "Edit"
@@ -6386,6 +6383,9 @@ msgstr "编辑"
 msgid "View"
 msgstr "视图"

+msgid "Open Speed Dial"
+msgstr ""
+
 msgid "Preset Bundle"
 msgstr "预设包"

@@ -9,7 +9,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 12:39+0800\n"
+"POT-Creation-Date: 2026-09-22 17:02+0800\n"
 "PO-Revision-Date: 2025-11-28 13:48-0600\n"
 "Last-Translator: tntchn <15895303+tntchn@users.noreply.github.com>\n"
 "Language-Team: \n"
@@ -6505,9 +6505,6 @@ msgstr "在 3D 場景中顯示選定物件的輪廓"
 msgid "Preferences"
 msgstr "偏好設定"

-msgid "Open speed dial"
-msgstr ""
-
 # AI Translated
 msgctxt "Menu"
 msgid "Edit"
@@ -6516,6 +6513,9 @@ msgstr "編輯"
 msgid "View"
 msgstr "視角"

+msgid "Open Speed Dial"
+msgstr ""
+
 msgid "Preset Bundle"
 msgstr "設定檔組"

@@ -1,6 +1,6 @@
 {
 	"name": "Eryone",
-	"version": "02.04.00.05",
+	"version": "02.04.00.06",
 	"force_update": "0",
 	"description": "Eryone  configurations",
 	"machine_model_list": [
@@ -432,10 +432,18 @@
 			"name": "Eryone ABS",
 			"sub_path": "filament/Eryone ABS.json"
 		},
+		{
+			"name": "Eryone ABS+-HS @Thinker X400 0.4 nozzle",
+			"sub_path": "filament/Eryone ABS+-HS @Thinker X400 0.4 nozzle.json"
+		},
 		{
 			"name": "Eryone ABS-CF",
 			"sub_path": "filament/Eryone ABS-CF.json"
 		},
+		{
+			"name": "Eryone ABS-GF @Thinker X400 0.4 nozzle",
+			"sub_path": "filament/Eryone ABS-GF @Thinker X400 0.4 nozzle.json"
+		},
 		{
 			"name": "Eryone ASA",
 			"sub_path": "filament/Eryone ASA.json"
@@ -444,6 +452,10 @@
 			"name": "Eryone ASA-CF",
 			"sub_path": "filament/Eryone ASA-CF.json"
 		},
+		{
+			"name": "Eryone ASA-HS @Thinker X400 0.4 nozzle",
+			"sub_path": "filament/Eryone ASA-HS @Thinker X400 0.4 nozzle.json"
+		},
 		{
 			"name": "Eryone PA",
 			"sub_path": "filament/Eryone PA.json"
@@ -460,18 +472,50 @@
 			"name": "Eryone PETG",
 			"sub_path": "filament/Eryone PETG.json"
 		},
+		{
+			"name": "Eryone PETG HS @Thinker X400 0.4 nozzle",
+			"sub_path": "filament/Eryone PETG HS @Thinker X400 0.4 nozzle.json"
+		},
 		{
 			"name": "Eryone PETG-CF",
 			"sub_path": "filament/Eryone PETG-CF.json"
 		},
+		{
+			"name": "Eryone PETG-GF @Thinker X400 0.4 nozzle",
+			"sub_path": "filament/Eryone PETG-GF @Thinker X400 0.4 nozzle.json"
+		},
+		{
+			"name": "Eryone PETG-Lite @Thinker X400 0.4 nozzle",
+			"sub_path": "filament/Eryone PETG-Lite @Thinker X400 0.4 nozzle.json"
+		},
+		{
+			"name": "Eryone PETG-Matte @Thinker X400 0.4 nozzle",
+			"sub_path": "filament/Eryone PETG-Matte @Thinker X400 0.4 nozzle.json"
+		},
+		{
+			"name": "Eryone PETG-Translucent @Thinker X400 0.4 nozzle",
+			"sub_path": "filament/Eryone PETG-Translucent @Thinker X400 0.4 nozzle.json"
+		},
 		{
 			"name": "Eryone PLA",
 			"sub_path": "filament/Eryone PLA.json"
 		},
+		{
+			"name": "Eryone PLA+HS @Thinker X400 0.4 nozzle",
+			"sub_path": "filament/Eryone PLA+HS @Thinker X400 0.4 nozzle.json"
+		},
 		{
 			"name": "Eryone PLA-CF",
 			"sub_path": "filament/Eryone PLA-CF.json"
 		},
+		{
+			"name": "Eryone PLA-Matte @Thinker X400 0.4 nozzle",
+			"sub_path": "filament/Eryone PLA-Matte @Thinker X400 0.4 nozzle.json"
+		},
+		{
+			"name": "Eryone PLA-Matte HS @Thinker X400 0.4 nozzle",
+			"sub_path": "filament/Eryone PLA-Matte HS @Thinker X400 0.4 nozzle.json"
+		},
 		{
 			"name": "Eryone PP",
 			"sub_path": "filament/Eryone PP.json"
@@ -488,6 +532,14 @@
 			"name": "Eryone TPU",
 			"sub_path": "filament/Eryone TPU.json"
 		},
+		{
+			"name": "Eryone petg-Galaxy @Thinker X400 0.4 nozzle",
+			"sub_path": "filament/Eryone petg-Galaxy @Thinker X400 0.4 nozzle.json"
+		},
+		{
+			"name": "Eryone pla-Ultra Silk @Thinker X400 0.4 nozzle",
+			"sub_path": "filament/Eryone pla-Ultra Silk @Thinker X400 0.4 nozzle.json"
+		},
 		{
 			"name": "fdm_filament_pla",
 			"sub_path": "filament/fdm_filament_pla.json"
@@ -0,0 +1,54 @@
+{
+	"type": "filament",
+	"name": "Eryone ABS+-HS @Thinker X400 0.4 nozzle",
+	"inherits": "Eryone Standard PLA",
+	"from": "system",
+	"setting_id": "aUH1I90BFXa0C84r",
+	"filament_id": "OFRgjTRp",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Thinker X400 0.4 nozzle"
+	],
+	"filament_settings_id": [
+		"Eryone ABS+-HS @Thinker X400 0.4 nozzle"
+	],
+	"fan_max_speed": [
+		"20"
+	],
+	"fan_min_speed": [
+		"0"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \nSET_FAN_SPEED FAN=filter_fan SPEED=0"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"25"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\nSET_FAN_SPEED FAN=filter_fan SPEED=1"
+	],
+	"filament_type": [
+		"ABS"
+	],
+	"hot_plate_temp": [
+		"90"
+	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
+	"nozzle_temperature": [
+		"255"
+	],
+	"nozzle_temperature_initial_layer": [
+		"255"
+	],
+	"slow_down_layer_time": [
+		"4"
+	],
+	"slow_down_min_speed": [
+		"15"
+	]
+}
@@ -0,0 +1,54 @@
+{
+	"type": "filament",
+	"name": "Eryone ABS-GF @Thinker X400 0.4 nozzle",
+	"inherits": "Eryone Standard PLA",
+	"from": "system",
+	"setting_id": "WnsZC7HYi5Z1MOcn",
+	"filament_id": "OFenMm2Y",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Thinker X400 0.4 nozzle"
+	],
+	"filament_settings_id": [
+		"Eryone ABS-GF @Thinker X400 0.4 nozzle"
+	],
+	"fan_max_speed": [
+		"20"
+	],
+	"fan_min_speed": [
+		"0"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \nSET_FAN_SPEED FAN=filter_fan SPEED=0"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\nSET_FAN_SPEED FAN=filter_fan SPEED=1"
+	],
+	"filament_type": [
+		"ABS"
+	],
+	"hot_plate_temp": [
+		"90"
+	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
+	"nozzle_temperature": [
+		"265"
+	],
+	"nozzle_temperature_initial_layer": [
+		"265"
+	],
+	"slow_down_layer_time": [
+		"4"
+	],
+	"slow_down_min_speed": [
+		"15"
+	]
+}
@@ -0,0 +1,54 @@
+{
+	"type": "filament",
+	"name": "Eryone ASA-HS @Thinker X400 0.4 nozzle",
+	"inherits": "Eryone Standard PLA",
+	"from": "system",
+	"setting_id": "xw8zqUsFb2WVaSo1",
+	"filament_id": "OFIzY5sP",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Thinker X400 0.4 nozzle"
+	],
+	"filament_settings_id": [
+		"Eryone ASA-HS @Thinker X400 0.4 nozzle"
+	],
+	"fan_max_speed": [
+		"20"
+	],
+	"fan_min_speed": [
+		"0"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \nSET_FAN_SPEED FAN=filter_fan SPEED=0"
+	],
+	"filament_flow_ratio": [
+		"1"
+	],
+	"filament_max_volumetric_speed": [
+		"20"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\nSET_FAN_SPEED FAN=filter_fan SPEED=1"
+	],
+	"filament_type": [
+		"ASA"
+	],
+	"hot_plate_temp": [
+		"90"
+	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
+	"nozzle_temperature": [
+		"260"
+	],
+	"nozzle_temperature_initial_layer": [
+		"260"
+	],
+	"slow_down_layer_time": [
+		"4"
+	],
+	"slow_down_min_speed": [
+		"15"
+	]
+}
@@ -0,0 +1,60 @@
+{
+	"type": "filament",
+	"name": "Eryone PETG HS @Thinker X400 0.4 nozzle",
+	"inherits": "Eryone Standard PLA",
+	"from": "system",
+	"setting_id": "GtPiiNgHAnxrR9Tj",
+	"filament_id": "OFtqfvcE",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Thinker X400 0.4 nozzle"
+	],
+	"filament_settings_id": [
+		"Eryone PETG HS @Thinker X400 0.4 nozzle"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"fan_max_speed": [
+		"50"
+	],
+	"fan_min_speed": [
+		"30"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \nSET_FAN_SPEED FAN=filter_fan SPEED=0"
+	],
+	"filament_flow_ratio": [
+		"0.97"
+	],
+	"filament_max_volumetric_speed": [
+		"15"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\nSET_FAN_SPEED FAN=filter_fan SPEED=1"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"full_fan_speed_layer": [
+		"2"
+	],
+	"hot_plate_temp": [
+		"70"
+	],
+	"hot_plate_temp_initial_layer": [
+		"70"
+	],
+	"nozzle_temperature": [
+		"240"
+	],
+	"nozzle_temperature_initial_layer": [
+		"240"
+	],
+	"slow_down_layer_time": [
+		"4"
+	],
+	"slow_down_min_speed": [
+		"15"
+	]
+}
@@ -40,7 +40,7 @@
 		"14"
 	],
 	"filament_settings_id": [
-		"Eryone PETG"
+		"Eryone PETG-CF"
 	],
 	"filament_type": [
 		"PETG-CF"
@@ -0,0 +1,60 @@
+{
+	"type": "filament",
+	"name": "Eryone PETG-GF @Thinker X400 0.4 nozzle",
+	"inherits": "Eryone Standard PLA",
+	"from": "system",
+	"setting_id": "S1FBfw93PzYJMhCa",
+	"filament_id": "OFbzOkXX",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Thinker X400 0.4 nozzle"
+	],
+	"filament_settings_id": [
+		"Eryone PETG-GF @Thinker X400 0.4 nozzle"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"fan_max_speed": [
+		"50"
+	],
+	"fan_min_speed": [
+		"30"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \nSET_FAN_SPEED FAN=filter_fan SPEED=0"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"13"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\nSET_FAN_SPEED FAN=filter_fan SPEED=1"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"full_fan_speed_layer": [
+		"2"
+	],
+	"hot_plate_temp": [
+		"70"
+	],
+	"hot_plate_temp_initial_layer": [
+		"70"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"slow_down_layer_time": [
+		"4"
+	],
+	"slow_down_min_speed": [
+		"15"
+	]
+}
@@ -0,0 +1,60 @@
+{
+	"type": "filament",
+	"name": "Eryone PETG-Lite @Thinker X400 0.4 nozzle",
+	"inherits": "Eryone Standard PLA",
+	"from": "system",
+	"setting_id": "CWHhUswq3j9XHAuC",
+	"filament_id": "OFyWb8AA",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Thinker X400 0.4 nozzle"
+	],
+	"filament_settings_id": [
+		"Eryone PETG-Lite @Thinker X400 0.4 nozzle"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"fan_max_speed": [
+		"50"
+	],
+	"fan_min_speed": [
+		"30"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \nSET_FAN_SPEED FAN=filter_fan SPEED=0"
+	],
+	"filament_flow_ratio": [
+		"0.9796"
+	],
+	"filament_max_volumetric_speed": [
+		"13"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\nSET_FAN_SPEED FAN=filter_fan SPEED=1"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"full_fan_speed_layer": [
+		"2"
+	],
+	"hot_plate_temp": [
+		"70"
+	],
+	"hot_plate_temp_initial_layer": [
+		"70"
+	],
+	"nozzle_temperature": [
+		"245"
+	],
+	"nozzle_temperature_initial_layer": [
+		"245"
+	],
+	"slow_down_layer_time": [
+		"4"
+	],
+	"slow_down_min_speed": [
+		"15"
+	]
+}
@@ -0,0 +1,60 @@
+{
+	"type": "filament",
+	"name": "Eryone PETG-Matte @Thinker X400 0.4 nozzle",
+	"inherits": "Eryone Standard PLA",
+	"from": "system",
+	"setting_id": "pzceBG5k2u3X9TLO",
+	"filament_id": "OFSvr7Aj",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Thinker X400 0.4 nozzle"
+	],
+	"filament_settings_id": [
+		"Eryone PETG-Matte @Thinker X400 0.4 nozzle"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"fan_max_speed": [
+		"50"
+	],
+	"fan_min_speed": [
+		"30"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \nSET_FAN_SPEED FAN=filter_fan SPEED=0"
+	],
+	"filament_flow_ratio": [
+		"1"
+	],
+	"filament_max_volumetric_speed": [
+		"22"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\nSET_FAN_SPEED FAN=filter_fan SPEED=1"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"full_fan_speed_layer": [
+		"2"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"slow_down_layer_time": [
+		"4"
+	],
+	"slow_down_min_speed": [
+		"15"
+	]
+}
@@ -0,0 +1,60 @@
+{
+	"type": "filament",
+	"name": "Eryone PETG-Translucent @Thinker X400 0.4 nozzle",
+	"inherits": "Eryone Standard PLA",
+	"from": "system",
+	"setting_id": "jN64L5SUnQB5dG1x",
+	"filament_id": "OFY2E8cd",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Thinker X400 0.4 nozzle"
+	],
+	"filament_settings_id": [
+		"Eryone PETG-Translucent @Thinker X400 0.4 nozzle"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"fan_max_speed": [
+		"50"
+	],
+	"fan_min_speed": [
+		"30"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \nSET_FAN_SPEED FAN=filter_fan SPEED=0"
+	],
+	"filament_flow_ratio": [
+		"0.99"
+	],
+	"filament_max_volumetric_speed": [
+		"24"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\nSET_FAN_SPEED FAN=filter_fan SPEED=1"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"full_fan_speed_layer": [
+		"2"
+	],
+	"hot_plate_temp": [
+		"70"
+	],
+	"hot_plate_temp_initial_layer": [
+		"70"
+	],
+	"nozzle_temperature": [
+		"215"
+	],
+	"nozzle_temperature_initial_layer": [
+		"215"
+	],
+	"slow_down_layer_time": [
+		"4"
+	],
+	"slow_down_min_speed": [
+		"15"
+	]
+}
@@ -0,0 +1,48 @@
+{
+	"type": "filament",
+	"name": "Eryone PLA+HS @Thinker X400 0.4 nozzle",
+	"inherits": "Eryone Standard PLA",
+	"from": "system",
+	"setting_id": "AfUEns6VhCXsj9Ft",
+	"filament_id": "OFeRoHy3",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Thinker X400 0.4 nozzle"
+	],
+	"filament_settings_id": [
+		"Eryone PLA+HS @Thinker X400 0.4 nozzle"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \nSET_FAN_SPEED FAN=filter_fan SPEED=0"
+	],
+	"filament_flow_ratio": [
+		"0.99"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\nSET_FAN_SPEED FAN=filter_fan SPEED=1"
+	],
+	"hot_plate_temp": [
+		"55"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55"
+	],
+	"nozzle_temperature": [
+		"210"
+	],
+	"nozzle_temperature_initial_layer": [
+		"210"
+	],
+	"slow_down_layer_time": [
+		"4"
+	],
+	"slow_down_min_speed": [
+		"15"
+	]
+}
@@ -0,0 +1,48 @@
+{
+	"type": "filament",
+	"name": "Eryone PLA-Matte @Thinker X400 0.4 nozzle",
+	"inherits": "Eryone Standard PLA",
+	"from": "system",
+	"setting_id": "Ho1nQYsweqTTte0g",
+	"filament_id": "OFFMWFWL",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Thinker X400 0.4 nozzle"
+	],
+	"filament_settings_id": [
+		"Eryone PLA-Matte @Thinker X400 0.4 nozzle"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \nSET_FAN_SPEED FAN=filter_fan SPEED=0"
+	],
+	"filament_flow_ratio": [
+		"0.99"
+	],
+	"filament_max_volumetric_speed": [
+		"21"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\nSET_FAN_SPEED FAN=filter_fan SPEED=1"
+	],
+	"hot_plate_temp": [
+		"55"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55"
+	],
+	"nozzle_temperature": [
+		"215"
+	],
+	"nozzle_temperature_initial_layer": [
+		"215"
+	],
+	"slow_down_layer_time": [
+		"4"
+	],
+	"slow_down_min_speed": [
+		"15"
+	]
+}
@@ -0,0 +1,48 @@
+{
+	"type": "filament",
+	"name": "Eryone PLA-Matte HS @Thinker X400 0.4 nozzle",
+	"inherits": "Eryone Standard PLA",
+	"from": "system",
+	"setting_id": "8W0yhuRu7OBJkSOS",
+	"filament_id": "OF9mNFSM",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Thinker X400 0.4 nozzle"
+	],
+	"filament_settings_id": [
+		"Eryone PLA-Matte HS @Thinker X400 0.4 nozzle"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \nSET_FAN_SPEED FAN=filter_fan SPEED=0"
+	],
+	"filament_flow_ratio": [
+		"1.1"
+	],
+	"filament_max_volumetric_speed": [
+		"28"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\nSET_FAN_SPEED FAN=filter_fan SPEED=1"
+	],
+	"hot_plate_temp": [
+		"55"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55"
+	],
+	"nozzle_temperature": [
+		"225"
+	],
+	"nozzle_temperature_initial_layer": [
+		"225"
+	],
+	"slow_down_layer_time": [
+		"4"
+	],
+	"slow_down_min_speed": [
+		"15"
+	]
+}
@@ -0,0 +1,60 @@
+{
+	"type": "filament",
+	"name": "Eryone petg-Galaxy @Thinker X400 0.4 nozzle",
+	"inherits": "Eryone Standard PLA",
+	"from": "system",
+	"setting_id": "R4BPYs8aAc9DFf0n",
+	"filament_id": "OFWDDu8u",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Thinker X400 0.4 nozzle"
+	],
+	"filament_settings_id": [
+		"Eryone petg-Galaxy @Thinker X400 0.4 nozzle"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"fan_max_speed": [
+		"50"
+	],
+	"fan_min_speed": [
+		"30"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \nSET_FAN_SPEED FAN=filter_fan SPEED=0"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"21"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\nSET_FAN_SPEED FAN=filter_fan SPEED=1"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"full_fan_speed_layer": [
+		"2"
+	],
+	"hot_plate_temp": [
+		"70"
+	],
+	"hot_plate_temp_initial_layer": [
+		"70"
+	],
+	"nozzle_temperature": [
+		"245"
+	],
+	"nozzle_temperature_initial_layer": [
+		"245"
+	],
+	"slow_down_layer_time": [
+		"4"
+	],
+	"slow_down_min_speed": [
+		"15"
+	]
+}
@@ -0,0 +1,48 @@
+{
+	"type": "filament",
+	"name": "Eryone pla-Ultra Silk @Thinker X400 0.4 nozzle",
+	"inherits": "Eryone Standard PLA",
+	"from": "system",
+	"setting_id": "jCbto64oaAKrDaN0",
+	"filament_id": "OF99Cc22",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Thinker X400 0.4 nozzle"
+	],
+	"filament_settings_id": [
+		"Eryone pla-Ultra Silk @Thinker X400 0.4 nozzle"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \nSET_FAN_SPEED FAN=filter_fan SPEED=0"
+	],
+	"filament_flow_ratio": [
+		"0.97"
+	],
+	"filament_max_volumetric_speed": [
+		"15"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\nSET_FAN_SPEED FAN=filter_fan SPEED=1"
+	],
+	"hot_plate_temp": [
+		"55"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55"
+	],
+	"nozzle_temperature": [
+		"230"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"slow_down_layer_time": [
+		"4"
+	],
+	"slow_down_min_speed": [
+		"15"
+	]
+}
@@ -1,7 +1,7 @@
 {
 	"name": "WonderMaker",
 	"url": "",
-	"version": "02.04.00.03",
+	"version": "02.04.00.04",
 	"force_update": "0",
 	"description": "WonderMaker configurations",
 	"machine_model_list": [
@@ -432,12 +432,8 @@
 			"sub_path": "machine/WonderMaker ZR 0.4 nozzle.json"
 		},
 		{
-			"name": "WonderMaker ZR Ultra 0.4 nozzle",
-			"sub_path": "machine/WonderMaker ZR Ultra 0.4 nozzle.json"
-		},
-		{
-			"name": "WonderMaker ZR Ultra S 0.4 nozzle",
-			"sub_path": "machine/WonderMaker ZR Ultra S 0.4 nozzle.json"
+			"name": "fdm_ultra_common",
+			"sub_path": "machine/fdm_ultra_common.json"
 		},
 		{
 			"name": "WonderMaker ZR 0.2 nozzle",
@@ -455,6 +451,10 @@
 			"name": "WonderMaker ZR Ultra 0.2 nozzle",
 			"sub_path": "machine/WonderMaker ZR Ultra 0.2 nozzle.json"
 		},
+		{
+			"name": "WonderMaker ZR Ultra 0.4 nozzle",
+			"sub_path": "machine/WonderMaker ZR Ultra 0.4 nozzle.json"
+		},
 		{
 			"name": "WonderMaker ZR Ultra 0.6 nozzle",
 			"sub_path": "machine/WonderMaker ZR Ultra 0.6 nozzle.json"
@@ -467,6 +467,10 @@
 			"name": "WonderMaker ZR Ultra S 0.2 nozzle",
 			"sub_path": "machine/WonderMaker ZR Ultra S 0.2 nozzle.json"
 		},
+		{
+			"name": "WonderMaker ZR Ultra S 0.4 nozzle",
+			"sub_path": "machine/WonderMaker ZR Ultra S 0.4 nozzle.json"
+		},
 		{
 			"name": "WonderMaker ZR Ultra S 0.6 nozzle",
 			"sub_path": "machine/WonderMaker ZR Ultra S 0.6 nozzle.json"
@@ -1,22 +1,23 @@
 {
 	"type": "machine",
 	"name": "WonderMaker ZR Ultra 0.2 nozzle",
-	"inherits": "WonderMaker ZR Ultra 0.4 nozzle",
+	"inherits": "fdm_ultra_common",
 	"from": "system",
 	"setting_id": "AX42zNj8YsJ94ilv",
 	"instantiation": "true",
+	"printer_model": "WonderMaker ZR Ultra",
+	"printer_variant": "0.2",
+	"default_print_profile": "0.10mm Standard @WonderMaker ZR Ultra 0.2 nozzle",
+	"default_bed_type": "4",
+	"max_layer_height": [
+		"0.14"
+	],
 	"nozzle_diameter": [
 		"0.2",
 		"0.2",
 		"0.2",
 		"0.2"
 	],
-	"printer_model": "WonderMaker ZR Ultra",
-	"printer_variant": "0.2",
-	"default_print_profile": "0.10mm Standard @WonderMaker ZR Ultra 0.2 nozzle",
-	"max_layer_height": [
-		"0.14"
-	],
 	"min_layer_height": [
 		"0.04"
 	],
@@ -1,65 +1,17 @@
 {
 	"type": "machine",
 	"name": "WonderMaker ZR Ultra 0.4 nozzle",
-	"inherits": "fdm_klipper_common",
+	"inherits": "fdm_ultra_common",
 	"from": "system",
 	"setting_id": "xJBdCljSZVDINXnP",
 	"instantiation": "true",
 	"printer_model": "WonderMaker ZR Ultra",
 	"default_print_profile": "0.20mm Standard @WonderMaker ZR Ultra",
 	"default_bed_type": "4",
-	"default_filament_profile": [
-		"WonderMaker PLA Basic"
-	],
-	"single_extruder_multi_material": "0",
 	"nozzle_diameter": [
 		"0.4",
 		"0.4",
 		"0.4",
 		"0.4"
-	],
-	"printable_area": [
-		"0x0",
-		"300x0",
-		"300x270",
-		"0x270"
-	],
-	"bed_exclude_area": [],
-	"printable_height": "290",
-	"extruder_clearance_radius": "134",
-	"bed_mesh_min": [
-		"10",
-		"10"
-	],
-	"bed_mesh_max": [
-		"290",
-		"260"
-	],
-	"bed_mesh_probe_distance": [
-		"50",
-		"50"
-	],
-	"support_air_filtration": "0",
-	"support_chamber_temp_control": "0",
-	"machine_tool_change_time": "10",
-	"machine_load_filament_time": "0",
-	"machine_unload_filament_time": "0",
-	"retract_lift_below": [
-		"279",
-		"279",
-		"279",
-		"279"
-	],
-	"enable_long_retraction_when_cut": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"long_retractions_when_cut": [
-		"0",
-		"0",
-		"0",
-		"0"
 	]
 }
@@ -1,22 +1,23 @@
 {
 	"type": "machine",
 	"name": "WonderMaker ZR Ultra 0.6 nozzle",
-	"inherits": "WonderMaker ZR Ultra 0.4 nozzle",
+	"inherits": "fdm_ultra_common",
 	"from": "system",
 	"setting_id": "6OWxZLFn3RD54QfX",
 	"instantiation": "true",
+	"printer_model": "WonderMaker ZR Ultra",
+	"printer_variant": "0.6",
+	"default_print_profile": "0.30mm Standard @WonderMaker ZR Ultra 0.6 nozzle",
+	"default_bed_type": "4",
+	"max_layer_height": [
+		"0.42"
+	],
 	"nozzle_diameter": [
 		"0.6",
 		"0.6",
 		"0.6",
 		"0.6"
 	],
-	"printer_model": "WonderMaker ZR Ultra",
-	"printer_variant": "0.6",
-	"default_print_profile": "0.30mm Standard @WonderMaker ZR Ultra 0.6 nozzle",
-	"max_layer_height": [
-		"0.42"
-	],
 	"min_layer_height": [
 		"0.12"
 	],
@@ -1,22 +1,23 @@
 {
 	"type": "machine",
 	"name": "WonderMaker ZR Ultra 0.8 nozzle",
-	"inherits": "WonderMaker ZR Ultra 0.4 nozzle",
+	"inherits": "fdm_ultra_common",
 	"from": "system",
 	"setting_id": "SY9snlsMkurhEYWP",
 	"instantiation": "true",
+	"printer_model": "WonderMaker ZR Ultra",
+	"printer_variant": "0.8",
+	"default_print_profile": "0.40mm Standard @WonderMaker ZR Ultra 0.8 nozzle",
+	"default_bed_type": "4",
+	"max_layer_height": [
+		"0.56"
+	],
 	"nozzle_diameter": [
 		"0.8",
 		"0.8",
 		"0.8",
 		"0.8"
 	],
-	"printer_model": "WonderMaker ZR Ultra",
-	"printer_variant": "0.8",
-	"default_print_profile": "0.40mm Standard @WonderMaker ZR Ultra 0.8 nozzle",
-	"max_layer_height": [
-		"0.56"
-	],
 	"min_layer_height": [
 		"0.16"
 	],
@@ -1,29 +1,19 @@
 {
 	"type": "machine",
 	"name": "WonderMaker ZR Ultra S 0.2 nozzle",
-	"inherits": "WonderMaker ZR Ultra S 0.4 nozzle",
+	"inherits": "WonderMaker ZR Ultra 0.2 nozzle",
 	"from": "system",
 	"setting_id": "ZNAx3f7tX3DatiK1",
 	"instantiation": "true",
+	"printer_model": "WonderMaker ZR Ultra S",
 	"nozzle_diameter": [
 		"0.2",
 		"0.2",
 		"0.2",
 		"0.2"
 	],
-	"printer_model": "WonderMaker ZR Ultra S",
-	"printer_variant": "0.2",
 	"default_print_profile": "0.10mm Standard @WonderMaker ZR Ultra 0.2 nozzle",
-	"max_layer_height": [
-		"0.14"
-	],
-	"min_layer_height": [
-		"0.04"
-	],
-	"retraction_length": [
-		"0.4",
-		"0.4",
-		"0.4",
-		"0.4"
-	]
+	"printer_variant": "0.2",
+	"support_air_filtration": "1",
+	"support_chamber_temp_control": "1"
 }
@@ -1,65 +1,18 @@
 {
 	"type": "machine",
 	"name": "WonderMaker ZR Ultra S 0.4 nozzle",
-	"inherits": "fdm_klipper_common",
+	"inherits": "WonderMaker ZR Ultra 0.4 nozzle",
 	"from": "system",
 	"setting_id": "8xoZ6vYv9ws0J97u",
 	"instantiation": "true",
 	"printer_model": "WonderMaker ZR Ultra S",
-	"default_print_profile": "0.20mm Standard @WonderMaker ZR Ultra",
-	"default_bed_type": "4",
-	"default_filament_profile": [
-		"WonderMaker PLA Basic"
-	],
-	"single_extruder_multi_material": "0",
 	"nozzle_diameter": [
 		"0.4",
 		"0.4",
 		"0.4",
 		"0.4"
 	],
-	"printable_area": [
-		"0x0",
-		"300x0",
-		"300x270",
-		"0x270"
-	],
-	"bed_exclude_area": [],
-	"printable_height": "290",
-	"extruder_clearance_radius": "134",
-	"bed_mesh_min": [
-		"10",
-		"10"
-	],
-	"bed_mesh_max": [
-		"290",
-		"260"
-	],
-	"bed_mesh_probe_distance": [
-		"50",
-		"50"
-	],
+	"default_print_profile": "0.20mm Standard @WonderMaker ZR Ultra",
 	"support_air_filtration": "1",
-	"support_chamber_temp_control": "1",
-	"machine_tool_change_time": "10",
-	"machine_load_filament_time": "0",
-	"machine_unload_filament_time": "0",
-	"retract_lift_below": [
-		"279",
-		"279",
-		"279",
-		"279"
-	],
-	"enable_long_retraction_when_cut": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"long_retractions_when_cut": [
-		"0",
-		"0",
-		"0",
-		"0"
-	]
+	"support_chamber_temp_control": "1"
 }
@@ -1,32 +1,19 @@
 {
 	"type": "machine",
 	"name": "WonderMaker ZR Ultra S 0.6 nozzle",
-	"inherits": "WonderMaker ZR Ultra S 0.4 nozzle",
+	"inherits": "WonderMaker ZR Ultra 0.6 nozzle",
 	"from": "system",
 	"setting_id": "xuJnOPTmSW1BMo6p",
 	"instantiation": "true",
 	"printer_model": "WonderMaker ZR Ultra S",
-	"default_print_profile": "0.30mm Standard @WonderMaker ZR Ultra 0.6 nozzle",
-	"printer_variant": "0.6",
 	"nozzle_diameter": [
+		"0.6",
+		"0.6",
+		"0.6",
 		"0.6"
 	],
-	"max_layer_height": [
-		"0.42"
-	],
-	"min_layer_height": [
-		"0.12"
-	],
-	"retraction_length": [
-		"1.4",
-		"1.4",
-		"1.4",
-		"1.4"
-	],
-	"retraction_minimum_travel": [
-		"3",
-		"3",
-		"3",
-		"3"
-	]
+	"default_print_profile": "0.30mm Standard @WonderMaker ZR Ultra 0.6 nozzle",
+	"printer_variant": "0.6",
+	"support_air_filtration": "1",
+	"support_chamber_temp_control": "1"
 }
@@ -1,32 +1,19 @@
 {
 	"type": "machine",
 	"name": "WonderMaker ZR Ultra S 0.8 nozzle",
-	"inherits": "WonderMaker ZR Ultra S 0.4 nozzle",
+	"inherits": "WonderMaker ZR Ultra 0.8 nozzle",
 	"from": "system",
 	"setting_id": "0BPLKMspArilfkGT",
 	"instantiation": "true",
 	"printer_model": "WonderMaker ZR Ultra S",
-	"default_print_profile": "0.40mm Standard @WonderMaker ZR Ultra 0.8 nozzle",
-	"printer_variant": "0.8",
 	"nozzle_diameter": [
+		"0.8",
+		"0.8",
+		"0.8",
 		"0.8"
 	],
-	"max_layer_height": [
-		"0.56"
-	],
-	"min_layer_height": [
-		"0.16"
-	],
-	"retract_length_toolchange": [
-		"3",
-		"3",
-		"3",
-		"3"
-	],
-	"retraction_length": [
-		"3",
-		"3",
-		"3",
-		"3"
-	]
+	"default_print_profile": "0.40mm Standard @WonderMaker ZR Ultra 0.8 nozzle",
+	"printer_variant": "0.8",
+	"support_air_filtration": "1",
+	"support_chamber_temp_control": "1"
 }
@@ -0,0 +1,64 @@
+{
+	"type": "machine",
+	"name": "fdm_ultra_common",
+	"inherits": "fdm_klipper_common",
+	"from": "system",
+	"instantiation": "false",
+	"default_bed_type": "4",
+	"default_filament_profile": [
+		"WonderMaker PLA Basic"
+	],
+	"single_extruder_multi_material": "0",
+	"enable_filament_mapping": "1",
+	"filament_swap_gcode": "M117 Swap filament for tool {next_extruder}\nPAUSE",
+	"nozzle_diameter": [
+		"0.4",
+		"0.4",
+		"0.4",
+		"0.4"
+	],
+	"printable_area": [
+		"0x0",
+		"300x0",
+		"300x270",
+		"0x270"
+	],
+	"bed_exclude_area": [],
+	"printable_height": "290",
+	"extruder_clearance_radius": "134",
+	"bed_mesh_min": [
+		"10",
+		"10"
+	],
+	"bed_mesh_max": [
+		"290",
+		"260"
+	],
+	"bed_mesh_probe_distance": [
+		"50",
+		"50"
+	],
+	"support_air_filtration": "0",
+	"support_chamber_temp_control": "0",
+	"machine_tool_change_time": "10",
+	"machine_load_filament_time": "0",
+	"machine_unload_filament_time": "0",
+	"retract_lift_below": [
+		"279",
+		"279",
+		"279",
+		"279"
+	],
+	"enable_long_retraction_when_cut": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"long_retractions_when_cut": [
+		"0",
+		"0",
+		"0",
+		"0"
+	]
+}
@@ -575,7 +575,7 @@ function CapabilityCanRun(plugin, capability) {
 }

 function IsPluginChecked(plugin) {
-  return GetStatus(plugin) === "Activated";
+  return plugin.is_loaded;
 }

 function HasMixedCapabilityState(plugin) {
@@ -1347,6 +1347,8 @@ function StatusDescription(plugin) {
      return "This plugin is still loading.";
    case "Error":
      return "This plugin is blocked until its error is fixed.";
+    case "RuntimeError":
+      return "This plugin is loaded but a capability reported an error.";
    case "Inactive":
    default:
      return "This plugin is inactive. Activate it to install or load it.";
@@ -424,6 +424,11 @@ body.pane-resizing {
  font-weight: 600;
 }

+.status-cell.status-runtimeerror {
+  color: var(--plugin-status-warn);
+  font-weight: 600;
+}
+
 .status-cell.status-loading {
  color: var(--plugin-status-warn);
  font-weight: 600;
@@ -680,6 +685,11 @@ body.pane-resizing {
  color: var(--plugin-status-danger);
 }

+.detail-status-chip.status-runtimeerror {
+  background: var(--plugin-status-warn-bg);
+  color: var(--plugin-status-warn);
+}
+
 .detail-status-chip.status-loading {
  background: var(--plugin-status-warn-bg);
  color: var(--plugin-status-warn);
@@ -1,5 +1,5 @@
 <!DOCTYPE html>
-<!-- Bootstrap page for PluginWebDialog. The real plugin HTML is loaded via
+<!-- Bootstrap page for WebDialog. The real plugin HTML is loaded via
     wxWebView::SetPage once this page finishes loading; this file only exists
     to bring the webview up. -->
 <html>
@@ -0,0 +1,146 @@
+# /// script
+# requires-python = ">=3.12"
+#
+# [tool.orcaslicer.plugin]
+# name = "Dock Panel Demo"
+# description = "Opens a dockable panel beside the 3D view that lists the objects on the plate."
+# author = "OrcaSlicer"
+# version = "0.0.1"
+# ///
+"""Dock Panel Demo -- orca.host.ui.create_dock_panel().
+
+Run it from the Plugins dialog. It opens an HTML panel docked on the right of the 3D view, in the
+same dock area as the sidebar. Drag its caption to dock it on another side (or float it, where the
+platform allows), hide it from the page and run the plugin again to bring it back, or close it with
+its close button or from the page.
+
+  page   --orca.postMessage({command: 'refresh'})-->  plugin.on_message()
+  page   --orca.postMessage({command: 'hide'})-->     plugin.on_message() -> panel.hide()
+  page   --orca.close()-->                            panel closes, plugin.on_close()
+  plugin --panel.post({command: 'objects', ...})-->   page (orca.onMessage)
+"""
+import orca
+
+PAGE = """
+<style>
+  body { margin: 0; padding: 12px; font-size: 13px; }
+  h3 { margin: 0 0 4px; font-size: 14px; }
+  .note { margin: 0 0 12px; color: var(--orca-muted); font-size: 12px; }
+  .actions { display: flex; flex-wrap: wrap; gap: 6px; margin-bottom: 12px; }
+  .actions button.quiet { background: transparent; color: var(--orca-fg); border-color: var(--orca-border); }
+  table { width: 100%; border-collapse: collapse; }
+  td.count { text-align: right; font-variant-numeric: tabular-nums; }
+  #status { margin-top: 10px; color: var(--orca-muted); font-size: 12px; }
+</style>
+
+<h3>Objects on the plate</h3>
+<p class="note">Docked beside the 3D view. Drag the caption to move it.</p>
+
+<div class="actions">
+  <button type="button" id="refresh">Refresh</button>
+  <button type="button" id="hide" class="quiet">Hide</button>
+  <button type="button" id="close" class="quiet">Close</button>
+</div>
+
+<table>
+  <thead><tr><th>Name</th><th>Parts</th><th>Copies</th></tr></thead>
+  <tbody id="rows"></tbody>
+</table>
+<p id="status">Waiting for the plugin...</p>
+
+<script>
+(function () {
+  function text(value) {
+    var span = document.createElement("span");
+    span.textContent = value;
+    return span.innerHTML;
+  }
+
+  function render(message) {
+    var rows = document.getElementById("rows");
+    var status = document.getElementById("status");
+    if (message.error) {
+      rows.innerHTML = "";
+      status.textContent = message.error;
+      return;
+    }
+    rows.innerHTML = message.objects.map(function (object) {
+      return "<tr><td>" + text(object.name) + "</td><td class=\\"count\\">" + object.volumes +
+             "</td><td class=\\"count\\">" + object.instances + "</td></tr>";
+    }).join("");
+    status.textContent = message.objects.length + " object(s), refreshed " + new Date().toLocaleTimeString();
+  }
+
+  orca.onMessage(function (message) {
+    if (message && message.command === "objects")
+      render(message);
+  });
+
+  document.getElementById("refresh").addEventListener("click", function () {
+    orca.postMessage({ command: "refresh" });
+  });
+  document.getElementById("hide").addEventListener("click", function () {
+    orca.postMessage({ command: "hide" });
+  });
+  document.getElementById("close").addEventListener("click", function () {
+    orca.close();
+  });
+
+  orca.postMessage({ command: "refresh" });
+})();
+</script>
+"""
+
+
+def plate_objects():
+    try:
+        model = orca.host.model()
+    except RuntimeError as error:
+        return {"command": "objects", "error": str(error)}
+    return {
+        "command": "objects",
+        "objects": [
+            {"name": obj.name or "(unnamed)", "volumes": obj.volume_count(), "instances": obj.instance_count()}
+            for obj in model.objects()
+        ],
+    }
+
+
+class DockPanelDemo(orca.script.ScriptPluginCapabilityBase):
+    panel = None
+
+    def get_name(self):
+        return "Dock Panel Demo"
+
+    def execute(self):
+        # The capability instance lives as long as the plugin, so a second run finds the open panel.
+        if self.panel is not None and self.panel.is_open():
+            self.panel.show()
+            return orca.ExecutionResult.success("Dock Panel Demo is already open.")
+        self.panel = orca.host.ui.create_dock_panel(
+            html=PAGE,
+            title="Dock Panel Demo",
+            width=320,
+            height=480,
+            on_message=self.on_message,
+            on_close=self.on_close,
+            dock="right",
+        )
+        return orca.ExecutionResult.success("Dock Panel Demo opened.")
+
+    # Called on the UI thread when the page posts.
+    def on_message(self, message):
+        command = (message or {}).get("command")
+        if command == "refresh":
+            self.panel.post(plate_objects())
+        elif command == "hide":
+            self.panel.hide()
+
+    def on_close(self):
+        self.panel = None
+
+
+@orca.plugin
+class DockPanelDemoPlugin(orca.base):
+    def register_capabilities(self):
+        orca.register_capability(DockPanelDemo)
@@ -331,6 +331,15 @@ modules:
        sha256: deedcabe339165214a3637df4c86a507aef0d793cf8774ff68735f4737e8ddbc
        dest: external-packages/FFMPEG

+      # libdatachannel v0.24.5
+      # The Git checkout includes the submodules that are missing from the
+      # GitHub source archive. DataChannel.cmake consumes it as SOURCE_DIR.
+      - type: git
+        url: https://github.com/paullouisageneau/libdatachannel.git
+        tag: v0.24.5
+        commit: 443f6934d9007eb7076ab7825ba330f355fcbead
+        dest: external-packages/DataChannel
+
      # ---------------------------------------------------------------
      # Fallback archives for deps normally provided by the GNOME SDK.
      # These are only used if find_package() fails to locate them.
@@ -122,17 +122,19 @@ Vec2d printable_area_center(const DynamicPrintConfig &cfg)

 // Put the prime tower where the GUI and CLI would before slicing. The config default (x 15, y 220)
 // lies off any bed shallower than the tower, and generation rejects an off-plate tower instead of
-// exporting it. Beside the centred cube, clear of the edge exclusion strips some beds carry, then
-// pulled inside the printable outline by the tower's own estimated footprint, with a few mm of
-// clearance so the conflict checker never sees the two touch.
-void place_wipe_tower(DynamicPrintConfig &cfg, const Vec2d &center)
+// exporting it. Beside the cube at the bed centre, clear of the edge exclusion strips some beds
+// carry, with a few mm of clearance so the conflict checker never sees the two touch. The cube and
+// the tower's estimated footprint are then pulled inside the printable outline as one rigid pair:
+// moving the tower alone would push it back onto the cube on a narrow bed. Returns that move for
+// the cube.
+Vec2d place_wipe_tower(DynamicPrintConfig &cfg, const Vec2d &center)
 {
    const auto *area = cfg.option<ConfigOptionPoints>("printable_area");
    if (area == nullptr || area->values.size() < 3)
-        return;
+        return Vec2d::Zero();
    const WipeTowerFootprint footprint = estimate_wipe_tower_footprint(cfg, resolve_wipe_tower_type(cfg), {0, 1}, cfg.opt_float("layer_height"), 10.);
    if (footprint.depth < EPSILON)
-        return;
+        return Vec2d::Zero();
    const double margin = WIPE_TOWER_MARGIN + footprint.brim_width;
    // The position is the tower's own origin; a rotated tower extends from it in another
    // direction, so place the rotated box's extents rather than the origin.
@@ -143,13 +145,22 @@ void place_wipe_tower(DynamicPrintConfig &cfg, const Vec2d &center)
    const Vec2d       size  = unscale(local.max) - lo;
    Vec2d             pos(center.x() + 5. + margin + 5. - lo.x(), center.y() - size.y() / 2. - lo.y());
    box.translate(Point::new_scale(pos.x(), pos.y()));
-    const Vec2f move = WipeTower::move_box_inside_polygon(get_extents(box), Polygons{Polygon::new_scale(area->values)}, scaled<coord_t>(margin));
-    pos += move.cast<double>();
+    // A bed too small for the pair keeps the cube at its centre and places the tower alone.
+    const Polygons    bed{Polygon::new_scale(area->values)};
+    const BoundingBox tower = get_extents(box);
+    BoundingBox       pair  = tower;
+    pair.merge(Point::new_scale(center.x() - 5., center.y() - 5.));
+    pair.merge(Point::new_scale(center.x() + 5., center.y() + 5.));
+    const Point       room  = get_extents(bed).size() - Point::new_scale(2. * margin, 2. * margin);
+    const bool        rigid = pair.size().x() < room.x() && pair.size().y() < room.y();
+    const Vec2d       move  = WipeTower::move_box_inside_polygon(rigid ? pair : tower, bed, scaled<coord_t>(margin)).cast<double>();
+    pos += move;
    cfg.option<ConfigOptionFloats>("wipe_tower_x", true)->values = {pos.x()};
    cfg.option<ConfigOptionFloats>("wipe_tower_y", true)->values = {pos.y()};
+    return rigid ? move : Vec2d::Zero();
 }

-// Slice one centered cube that switches from filament 1 to filament 2 partway up, so exactly one
+// Slice one cube that switches from filament 1 to filament 2 partway up, so exactly one
 // filament change fires, then export. The change drives the printer's own change_filament_gcode: on a
 // single-nozzle machine it rides the AMS prime tower (append_tcr), on a multi-nozzle machine it routes
 // through the nozzle swap (set_extruder / append_tcr2) - the engine picks the path from the printer's
@@ -157,10 +168,10 @@ void place_wipe_tower(DynamicPrintConfig &cfg, const Vec2d &center)
 // Slic3r::PlaceholderParserError from export.
 std::string slice_two_color_cube_and_export(DynamicPrintConfig cfg, bool is_bbl)
 {
-    const Vec2d center = printable_area_center(cfg);
-    place_wipe_tower(cfg, center);
+    const Vec2d center   = printable_area_center(cfg);
+    const Vec2d cube_min = center - Vec2d(5., 5.) + place_wipe_tower(cfg, center);
    TriangleMesh m = make_cube(10, 10, 10);
-    m.translate(float(center.x() - 5.), float(center.y() - 5.), 0.f);
+    m.translate(static_cast<float>(cube_min.x()), static_cast<float>(cube_min.y()), 0.f);

    Model  model;
    Print  print;
@@ -3824,7 +3824,6 @@ unsigned int PresetBundle::sync_ams_list(std::vector<std::pair<DynamicPrintConfi
    ConfigOptionStrings *filament_color_type = project_config.option<ConfigOptionStrings>("filament_colour_type");
    ConfigOptionInts *   filament_map = project_config.option<ConfigOptionInts>("filament_map");
    ConfigOptionInts *   filament_volume_map = project_config.option<ConfigOptionInts>("filament_volume_map");
-
    // Snapshot and temporarily strip mixed filament slots so AMS sync operates on physical
    // filaments only. A mixed slot is virtual and has no tray to sync against; leaving it in
    // would let AMS mapping overwrite it and would break the physical-first slot ordering the
@@ -139,8 +139,16 @@ set(SLIC3R_GUI_SOURCES
    GUI/TerminalDialog.hpp
    GUI/PluginProgressDialog.cpp
    GUI/PluginProgressDialog.hpp
-    GUI/PluginWebDialog.cpp
-    GUI/PluginWebDialog.hpp
+    GUI/WebDialog.cpp
+    GUI/WebDialog.hpp
+    GUI/DockPanel.cpp
+    GUI/DockPanel.hpp
+    GUI/WebPanel.cpp
+    GUI/WebPanel.hpp
+    GUI/Widgets/WebHosting.cpp
+    GUI/Widgets/WebHosting.hpp
+    GUI/AuiPaneLayout.cpp
+    GUI/AuiPaneLayout.hpp
    GUI/DragCanvas.cpp
    GUI/DragCanvas.hpp
    GUI/EditGCodeDialog.cpp
@@ -228,6 +236,7 @@ set(SLIC3R_GUI_SOURCES
    GUI/GLToolbar.hpp
    GUI/ImageDPIFrame.cpp
    GUI/ImageDPIFrame.hpp
+    GUI/IMediaController.hpp
    GUI/GUI_App.cpp
    GUI/GUI_App.hpp
    GUI/GUI_AuxiliaryList.cpp
@@ -351,6 +360,8 @@ set(SLIC3R_GUI_SOURCES
    GUI/MediaFilePanel.h
    GUI/MediaPlayCtrl.cpp
    GUI/MediaPlayCtrl.h
+    GUI/WebRtcMediaController.cpp
+    GUI/WebRtcMediaController.hpp
    GUI/MeshUtils.cpp
    GUI/MeshUtils.hpp
    GUI/ModelMall.cpp
@@ -544,6 +555,8 @@ set(SLIC3R_GUI_SOURCES
    GUI/WebUserLoginDialog.hpp
    GUI/WebViewDialog.cpp
    GUI/WebViewDialog.hpp
+    GUI/WebMediaController.hpp
+    GUI/WebMediaController.cpp
    GUI/Widgets/AMSControl.cpp
    GUI/Widgets/AMSControl.hpp
    GUI/Widgets/AMSItem.cpp
@@ -738,6 +751,7 @@ set(SLIC3R_GUI_SOURCES
    Utils/NetworkAgentFactory.cpp
    Utils/ICloudServiceAgent.hpp
    Utils/IPrinterAgent.hpp
+    Utils/ICameraSignalingChannel.hpp
    Utils/OrcaCloudServiceAgent.cpp
    Utils/OrcaCloudServiceAgent.hpp
    Utils/OrcaPrinterAgent.cpp
@@ -908,7 +922,7 @@ else()
    set(_opengl_link_lib OpenGL::GL)
 endif()

-target_link_libraries(libslic3r_gui libslic3r cereal::cereal imgui imguizmo minilzo libvgcode md4c-html glad ${_opengl_link_lib} hidapi mdns ${wxWidgets_LIBRARIES} glfw libcurl OpenSSL::SSL OpenSSL::Crypto noise::noise pybind11::embed)
+target_link_libraries(libslic3r_gui libslic3r cereal::cereal imgui imguizmo minilzo libvgcode md4c-html glad ${_opengl_link_lib} hidapi mdns ${wxWidgets_LIBRARIES} glfw libcurl OpenSSL::SSL OpenSSL::Crypto LibDataChannel::LibDataChannel noise::noise pybind11::embed)

 if (CMAKE_SYSTEM_NAME STREQUAL "Linux")
    # Linux finds wxWidgets in module mode, whose include dirs and definitions
@@ -965,29 +979,32 @@ endif ()

 if (APPLE)
    # Static FFmpeg from the deps install: nothing to bundle into the .app,
-    # no rpath/install_name handling. Order matters: avcodec -> swscale -> avutil.
+    # no rpath/install_name handling. Order matters: avformat -> avcodec -> swscale -> avutil.
+    find_library(LIBAVFORMAT_LIBRARY NAMES libavformat.a PATHS ${CMAKE_PREFIX_PATH}/lib NO_DEFAULT_PATH)
    find_library(LIBAVCODEC_LIBRARY NAMES libavcodec.a PATHS ${CMAKE_PREFIX_PATH}/lib NO_DEFAULT_PATH)
    find_library(LIBSWSCALE_LIBRARY NAMES libswscale.a PATHS ${CMAKE_PREFIX_PATH}/lib NO_DEFAULT_PATH)
    find_library(LIBAVUTIL_LIBRARY NAMES libavutil.a PATHS ${CMAKE_PREFIX_PATH}/lib NO_DEFAULT_PATH)
-    if (NOT LIBAVCODEC_LIBRARY OR NOT LIBSWSCALE_LIBRARY OR NOT LIBAVUTIL_LIBRARY)
-        message(FATAL_ERROR "Static FFmpeg (libavcodec.a/libswscale.a/libavutil.a) not found under ${CMAKE_PREFIX_PATH}/lib. Rebuild the deps — FFMPEG builds static-only on macOS.")
+    if (NOT LIBAVFORMAT_LIBRARY OR NOT LIBAVCODEC_LIBRARY OR NOT LIBSWSCALE_LIBRARY OR NOT LIBAVUTIL_LIBRARY)
+        message(FATAL_ERROR "Static FFmpeg (libavformat.a/libavcodec.a/libswscale.a/libavutil.a) not found under ${CMAKE_PREFIX_PATH}/lib. Rebuild the deps — FFMPEG builds static-only on macOS.")
    endif ()
-    target_link_libraries(libslic3r_gui ${LIBAVCODEC_LIBRARY} ${LIBSWSCALE_LIBRARY} ${LIBAVUTIL_LIBRARY})
+    target_link_libraries(libslic3r_gui ${LIBAVFORMAT_LIBRARY} ${LIBAVCODEC_LIBRARY} ${LIBSWSCALE_LIBRARY} ${LIBAVUTIL_LIBRARY})
    target_include_directories(libslic3r_gui SYSTEM PRIVATE ${CMAKE_PREFIX_PATH}/include)
 elseif (WIN32)
    # Prebuilt shared FFmpeg from the deps install. Windows has no pkg-config,
    # so resolve the import libraries out of the deps prefix directly; the DLLs
    # are copied next to the executable by the top level CMakeLists.
+    find_library(LIBAVFORMAT_LIBRARY NAMES avformat PATHS ${CMAKE_PREFIX_PATH}/lib NO_DEFAULT_PATH)
    find_library(LIBAVCODEC_LIBRARY NAMES avcodec PATHS ${CMAKE_PREFIX_PATH}/lib NO_DEFAULT_PATH)
    find_library(LIBSWSCALE_LIBRARY NAMES swscale PATHS ${CMAKE_PREFIX_PATH}/lib NO_DEFAULT_PATH)
    find_library(LIBAVUTIL_LIBRARY NAMES avutil PATHS ${CMAKE_PREFIX_PATH}/lib NO_DEFAULT_PATH)
    if (NOT LIBAVCODEC_LIBRARY OR NOT LIBSWSCALE_LIBRARY OR NOT LIBAVUTIL_LIBRARY)
        message(FATAL_ERROR "FFmpeg (avcodec/swscale/avutil) not found under ${CMAKE_PREFIX_PATH}/lib. Rebuild the deps.")
    endif ()
-    target_link_libraries(libslic3r_gui ${LIBAVCODEC_LIBRARY} ${LIBSWSCALE_LIBRARY} ${LIBAVUTIL_LIBRARY})
+    target_link_libraries(libslic3r_gui ${LIBAVFORMAT_LIBRARY} ${LIBAVCODEC_LIBRARY} ${LIBSWSCALE_LIBRARY} ${LIBAVUTIL_LIBRARY})
    target_include_directories(libslic3r_gui SYSTEM PRIVATE ${CMAKE_PREFIX_PATH}/include)
 else ()
    pkg_check_modules(LIBAV REQUIRED IMPORTED_TARGET
+        libavformat
        libavcodec
        libswscale
        libavutil
@@ -45,6 +45,25 @@ int AVVideoDecoder::open(Bambu_StreamInfo const &info)
    return 0;
 }

+int AVVideoDecoder::open(AVCodecParameters const &parameters)
+{
+    if (avcodec_parameters_to_context(codec_ctx_, &parameters) < 0)
+        return -1;
+
+    auto codec = avcodec_find_decoder(codec_ctx_->codec_id);
+    if (codec == nullptr) {
+        fprintf(stderr, "AVVideoDecoder: unsupported codec!\n");
+        return -1;
+    }
+    if (avcodec_open2(codec_ctx_, codec, nullptr) < 0) {
+        fprintf(stderr, "AVVideoDecoder: could not open codec\n");
+        return -1;
+    }
+
+    frame_ = av_frame_alloc();
+    return frame_ == nullptr ? -1 : 0;
+}
+
 int AVVideoDecoder::decode(const Bambu_Sample &sample)
 {
    int ret = -1;
@@ -71,6 +90,14 @@ int AVVideoDecoder::decode(const Bambu_Sample &sample)
    return ret;
 }

+int AVVideoDecoder::decode(const AVPacket &packet)
+{
+    int ret = avcodec_send_packet(codec_ctx_, &packet);
+    if (ret == 0)
+        got_frame_ = avcodec_receive_frame(codec_ctx_, frame_) == 0;
+    return ret;
+}
+
 int AVVideoDecoder::flush()
 {
    int ret = avcodec_send_packet(codec_ctx_, nullptr);
@@ -23,8 +23,10 @@ public:

 public:
    int  open(Bambu_StreamInfo const &info);
+    int  open(AVCodecParameters const &parameters);

    int  decode(Bambu_Sample const &sample);
+    int  decode(AVPacket const &packet);

    int  flush();

@@ -34,6 +36,14 @@ public:

    bool toWxBitmap(wxBitmap &bitmap, wxSize const & size);

+    // Native size of the most recently decoded frame, or an unspecified size if
+    // nothing has decoded yet. Lets a caller learn the video dimensions when the
+    // container/probe could not report them up front.
+    wxSize decoded_frame_size() const
+    {
+        return got_frame_ && frame_ ? wxSize{frame_->width, frame_->height} : wxSize{};
+    }
+
 private:
    AVCodecContext *codec_ctx_ = nullptr;
    AVFrame *       frame_     = nullptr;
@@ -0,0 +1,20 @@
+#include "AuiPaneLayout.hpp"
+
+namespace Slic3r { namespace GUI {
+
+std::string aui_pane_layout_entry(const std::string& layout, const std::string& pane_name)
+{
+    // Panes are separated by '|'; SavePerspective() escapes a '|' inside a caption as "\|".
+    const std::string prefix = "name=" + pane_name + ";";
+    size_t            begin  = 0;
+    for (size_t i = 0; i <= layout.size(); ++i) {
+        if (i < layout.size() && (layout[i] != '|' || (i > 0 && layout[i - 1] == '\\')))
+            continue;
+        if (layout.compare(begin, prefix.size(), prefix) == 0)
+            return layout.substr(begin, i - begin);
+        begin = i + 1;
+    }
+    return {};
+}
+
+}} // namespace Slic3r::GUI
@@ -0,0 +1,11 @@
+#pragma once
+
+#include <string>
+
+namespace Slic3r { namespace GUI {
+
+// The part a wxAuiManager layout string (wxAuiManager::SavePerspective) holds for `pane_name`, in the
+// form wxAuiManager::LoadPaneInfo() takes, or empty when the layout has no such pane.
+std::string aui_pane_layout_entry(const std::string& layout, const std::string& pane_name);
+
+}} // namespace Slic3r::GUI
@@ -328,7 +328,7 @@ void SelectMObjectPopup::update_user_devices()
    }

    m_bind_machine_list.clear();
-    m_bind_machine_list = dev->get_my_machine_list();
+    m_bind_machine_list = dev->get_my_machine_list(dev->get_current_printer_agent_id());

    //sort list
    std::vector<std::pair<std::string, MachineObject*>> user_machine_list;
@@ -8,6 +8,7 @@
 #include "libslic3r/Print.hpp"

 #include "DeviceCore/DevConfig.h"
+#include "DeviceCore/DevConfigUtil.h"
 #include "DeviceCore/DevExtruderSystem.h"
 #include "DeviceCore/DevFilaBlackList.h"
 #include "DeviceCore/DevFilaSystem.h"
@@ -1647,18 +1648,8 @@ bool CalibrationPresetPage::is_blocking_printing()
    if (obj_ == nullptr) return true;

    PresetBundle* preset_bundle = wxGetApp().preset_bundle;
-    auto source_model = preset_bundle->printers.get_edited_preset().get_printer_type(preset_bundle);
-    auto target_model = obj_->printer_type;
-
-    if (source_model != target_model) {
-        std::vector<std::string> compatible_machine = obj_->get_compatible_machine();
-        vector<std::string>::iterator it = find(compatible_machine.begin(), compatible_machine.end(), source_model);
-        if (it == compatible_machine.end()) {
-            return true;
-        }
-    }
-
-    return false;
+    const auto source_model = preset_bundle->printers.get_edited_preset().get_printer_type(preset_bundle);
+    return !DevPrinterConfigUtil::is_printer_model_compatible(source_model, *obj_);
 }

 bool CalibrationPresetPage::is_nozzle_info_synced() const
@@ -28,7 +28,6 @@ wxEND_EVENT_TABLE()

 wxDEFINE_EVENT(EVT_VCAMERA_SWITCH, wxMouseEvent);
 wxDEFINE_EVENT(EVT_SDCARD_ABSENT_HINT, wxCommandEvent);
-wxDEFINE_EVENT(EVT_CAM_SOURCE_CHANGE, wxCommandEvent);

 #define CAMERAPOPUP_CLICK_INTERVAL 20

@@ -102,34 +101,6 @@ CameraPopup::CameraPopup(wxWindow *parent)
        top_sizer->Add(0, 0, wxALL, 0);
    }

-    // Orca: custom IP camera source — lets the user point Live Video at any camera URL (Orca feature; not in the reference)
-    m_custom_camera_input_confirm = new Button(m_panel, _L("Enable"));
-    m_custom_camera_input_confirm->SetBackgroundColor(wxColour(38, 166, 154));
-    m_custom_camera_input_confirm->SetBorderColor(wxColour(38, 166, 154));
-    m_custom_camera_input_confirm->SetTextColor(wxColour(0xFFFFFE));
-    m_custom_camera_input_confirm->SetFont(Label::Body_14);
-    m_custom_camera_input_confirm->SetMinSize(wxSize(FromDIP(90), FromDIP(30)));
-    m_custom_camera_input_confirm->SetPosition(wxDefaultPosition);
-    m_custom_camera_input_confirm->SetCornerRadius(FromDIP(12));
-    m_custom_camera_input = new TextInput(m_panel, wxEmptyString, wxEmptyString, wxEmptyString, wxDefaultPosition, wxDefaultSize);
-    m_custom_camera_input->GetTextCtrl()->SetHint(_L("Hostname or IP"));
-    m_custom_camera_input->GetTextCtrl()->SetFont(Label::Body_14);
-    m_custom_camera_hint = new wxStaticText(m_panel, wxID_ANY, _L("Custom camera source"));
-    m_custom_camera_hint->Wrap(-1);
-    m_custom_camera_hint->SetFont(Label::Head_14);
-    m_custom_camera_hint->SetForegroundColour(TEXT_COL);
-
-    m_custom_camera_input_confirm->Bind(wxEVT_BUTTON, &CameraPopup::on_camera_source_changed, this);
-
-    if (!wxGetApp().app_config->get("camera", "custom_source").empty()) {
-        m_custom_camera_input->GetTextCtrl()->SetValue(wxGetApp().app_config->get("camera", "custom_source"));
-        set_custom_cam_button_state(wxGetApp().app_config->get("camera", "enable_custom_source") == "true");
-    }
-
-    top_sizer->Add(m_custom_camera_hint, 0, wxALIGN_CENTER_VERTICAL | wxALIGN_LEFT | wxALL, FromDIP(5));
-    top_sizer->Add(0, 0, wxALL, 0);
-    top_sizer->Add(m_custom_camera_input, 2, wxALIGN_CENTER_VERTICAL | wxEXPAND | wxALL, FromDIP(5));
-    top_sizer->Add(m_custom_camera_input_confirm, 1, wxALIGN_CENTER_VERTICAL | wxALIGN_RIGHT | wxALL, FromDIP(5));
    main_sizer->Add(top_sizer, 0, wxALL, FromDIP(10));

    auto url = wxString(L"https://www.orcaslicer.com/wiki/"); // Orca: neutral wiki link (vendor URL removed)
@@ -184,37 +155,6 @@ void CameraPopup::sdcard_absent_hint()
    GetEventHandler()->ProcessEvent(evt);
 }

-void CameraPopup::on_camera_source_changed(wxCommandEvent &event)
-{
-    if (m_obj && !m_custom_camera_input->GetTextCtrl()->IsEmpty()) {
-        handle_camera_source_change();
-    }
-}
-
-void CameraPopup::handle_camera_source_change()
-{
-    m_custom_camera_enabled = !m_custom_camera_enabled;
-
-    set_custom_cam_button_state(m_custom_camera_enabled);
-
-    wxGetApp().app_config->set("camera", "custom_source", m_custom_camera_input->GetTextCtrl()->GetValue().ToStdString());
-    wxGetApp().app_config->set("camera", "enable_custom_source", m_custom_camera_enabled);
-
-    wxCommandEvent evt(EVT_CAM_SOURCE_CHANGE);
-    evt.SetEventObject(this);
-    GetEventHandler()->ProcessEvent(evt);
-}
-
-void CameraPopup::set_custom_cam_button_state(bool state)
-{
-    m_custom_camera_enabled = state;
-    auto stateColour = state ? wxColour(170, 0, 0) : wxColour(38, 166, 154);
-    auto stateText = state ? "Disable" : "Enable";
-    m_custom_camera_input_confirm->SetBackgroundColor(stateColour);
-    m_custom_camera_input_confirm->SetBorderColor(stateColour);
-    m_custom_camera_input_confirm->SetLabel(_L(stateText));
-}
-
 void CameraPopup::on_switch_recording(wxCommandEvent& event)
 {
    if (!m_obj) return;
@@ -15,14 +15,12 @@
 #include "Widgets/SwitchButton.hpp"
 #include "Widgets/RadioBox.hpp"
 #include "Widgets/PopupWindow.hpp"
-#include "Widgets/TextInput.hpp"

 namespace Slic3r {
 namespace GUI {

 wxDECLARE_EVENT(EVT_VCAMERA_SWITCH, wxMouseEvent);
 wxDECLARE_EVENT(EVT_SDCARD_ABSENT_HINT, wxCommandEvent);
-wxDECLARE_EVENT(EVT_CAM_SOURCE_CHANGE, wxCommandEvent);

 class CameraPopup : public PopupWindow
 {
@@ -53,9 +51,6 @@ protected:
    void on_switch_recording(wxCommandEvent& event);
    void on_set_resolution();
    void sdcard_absent_hint();
-    void on_camera_source_changed(wxCommandEvent& event);
-    void handle_camera_source_change();
-    void set_custom_cam_button_state(bool state);

    wxWindow *  create_item_radiobox(wxString title, wxWindow *parent, wxString tooltip, int padding_left);
    void select_curr_radiobox(int btn_idx);
@@ -76,10 +71,10 @@ private:
    wxStaticText* m_text_liveview_retry;
    SwitchButton* m_switch_liveview_retry;
 #endif //BBL_RELEASE_TO_PUBLIC
-    wxStaticText* m_custom_camera_hint;
-    TextInput* m_custom_camera_input;
-    Button* m_custom_camera_input_confirm;
-    bool m_custom_camera_enabled{ false };
+    // wxStaticText* m_custom_camera_hint;
+    // TextInput* m_custom_camera_input;
+    // Button* m_custom_camera_input_confirm;
+    // bool m_custom_camera_enabled{ false };
    wxStaticText* m_text_resolution;
    wxWindow* m_resolution_options[RESOLUTION_OPTIONS_NUM];
    wxScrolledWindow *m_panel;
@@ -35,7 +35,9 @@ ConnectPrinterDialog::ConnectPrinterDialog(wxWindow *parent, wxWindowID id, cons
    sizer_connect = new wxBoxSizer(wxHORIZONTAL);

    m_textCtrl_code = new TextInput(this, wxEmptyString);
-    m_textCtrl_code->GetTextCtrl()->SetMaxLength(10);
+    // OrcaSonar uses a 12-character base32 access code. Keep this field long
+    // enough for it while retaining the existing validation for LAN codes.
+    m_textCtrl_code->GetTextCtrl()->SetMaxLength(12);
    m_textCtrl_code->SetFont(Label::Body_14);
    m_textCtrl_code->SetCornerRadius(FromDIP(5));
    m_textCtrl_code->SetSize(wxSize(FromDIP(330), FromDIP(40)));
@@ -1,5 +1,7 @@
 #include "DevConfigUtil.h"

+#include "slic3r/GUI/DeviceManager.hpp"
+
 #include <wx/dir.h>
 #include <boost/filesystem/operations.hpp>
 #include "../I18N.hpp"
@@ -41,6 +43,19 @@ static void _toolhead_translation_markers()

 std::string DevPrinterConfigUtil::m_resource_file_path = "";

+bool DevPrinterConfigUtil::is_printer_model_compatible(const std::string& source_model, MachineObject& machine)
+{
+    const std::string& target_model = machine.printer_type;
+    if (is_optional_printer_model_id(source_model) || is_optional_printer_model_id(target_model))
+        return true;
+
+    if (source_model == target_model)
+        return true;
+
+    const auto compatible_machine = machine.get_compatible_machine();
+    return std::find(compatible_machine.begin(), compatible_machine.end(), source_model) != compatible_machine.end();
+}
+

 std::map<std::string, std::string> DevPrinterConfigUtil::get_all_model_id_with_name()
 {
@@ -405,4 +420,4 @@ std::string DevPrinterConfigUtil::get_toolhead_display_name(
    return result;
 }

-};
+};
@@ -25,6 +25,8 @@
 namespace Slic3r
 {

+class MachineObject;
+
 /// Toolhead component type (extruder / nozzle / hotend)
 enum class ToolHeadComponent {
    Extruder,
@@ -59,6 +61,10 @@ public:
    /*printer*/
    // info
    static std::map<std::string, std::string> get_all_model_id_with_name();
+    // A printer agent may not know the physical model. Keep that case optional so
+    // model compatibility checks do not turn missing identity into a hard error.
+    static bool is_printer_model_compatible(const std::string& source_model, MachineObject& machine);
+    static bool is_optional_printer_model_id(const std::string& model_id) { return model_id.empty(); }
    static std::string get_printer_type(const std::string& type_str) { return get_value_from_config<std::string>(type_str, "printer_type"); }
    static std::string get_printer_display_name(const std::string& type_str) { return get_value_from_config<std::string>(type_str, "display_name"); }
    static std::string get_printer_series_str(std::string type_str) { return get_value_from_config<std::string>(type_str, "printer_series"); }
@@ -227,4 +233,4 @@ static std::string _parse_printer_type(const std::string &type_str)
    return type_str;
 }

-};// namespace Slic3r
+};// namespace Slic3r
@@ -762,9 +762,9 @@ void DevFilaSystemParser::ParseV1_0(const json& jj, MachineObject* obj, DevFilaS
                            {
                                curr_tray->remain = -1;
                            }
-                            if (tray_it->contains("tray_slot_placeholder")) {
-                                curr_tray->is_slot_placeholder = true;
-                            }
+                            // The tray objects are reused across status updates. Reset this
+                            // state when a previously empty slot receives a filament again.
+                            curr_tray->is_slot_placeholder = tray_it->contains("tray_slot_placeholder");
                            int ams_id_int = 0;
                            int tray_id_int = 0;
                            try
@@ -999,4 +999,4 @@ void DevFilaSystemParser::ParseAgentFilament(const json& data, MachineObject* ob
    }
 }

-}
+}
@@ -3,6 +3,7 @@
 #include <exception>

 #include "DevManager.h"
+#include "CloudProvider.hpp"
 #include "DevUtil.h"

 // TODO: remove this include
@@ -14,6 +15,8 @@

 #include "libslic3r/Time.hpp"

+#include "IPrinterAgent.hpp"
+
 using namespace nlohmann;

 namespace {
@@ -264,6 +267,10 @@ namespace Slic3r
            /* update userMachineList info */
            auto it = userMachineList.find(dev_id);
            if (it != userMachineList.end()) {
+                // A reused entry may have been created while another printer agent was active.
+                // The response was obtained through the current agent, so move ownership with
+                // the entry; otherwise agent-scoped lists hide it after a preset switch.
+                it->second->printer_agent_id = get_current_printer_agent_id();
                if (it->second->get_dev_ip() != dev_ip ||
                    it->second->bind_state != bind_state ||
                    it->second->bind_sec_link != sec_link ||
@@ -294,6 +301,9 @@ namespace Slic3r
                // update properties
                /* ip changed */
                obj = it->second;
+                // A reused LAN entry may have been discovered while another printer agent was
+                // active. The current discovery message establishes ownership for this agent.
+                obj->printer_agent_id = get_current_printer_agent_id();

                if (obj->get_dev_ip().compare(dev_ip) != 0) {
                    if ( connection_name.empty() ) {
@@ -405,6 +415,9 @@ namespace Slic3r
        auto           it = localMachineList.find(machine.dev_id);
        if (it != localMachineList.end()) {
            obj = it->second;
+            // insert_local_device is called by the active agent, so a reused entry must follow
+            // that agent as well; otherwise the agent-scoped printer list hides it.
+            obj->printer_agent_id = get_current_printer_agent_id();
        } else {
            obj = new MachineObject(this, m_agent, machine.dev_name, machine.dev_id, machine.dev_ip);
            obj->printer_agent_id = get_current_printer_agent_id();
@@ -497,7 +510,7 @@ namespace Slic3r

    MachineObject* DeviceManager::get_my_machine(std::string dev_id)
    {
-        auto list = get_my_machine_list();
+        auto list = get_my_machine_list(get_current_printer_agent_id());
        auto it = list.find(dev_id);
        if (it != list.end())
        {
@@ -534,25 +547,15 @@ namespace Slic3r
        OnSelectedMachineChanged(previous_selected_machine, selected_machine);
    }

-    void DeviceManager::clear_other_devices(const std::string& target_agent_id)
+    void DeviceManager::clear_other_devices()
    {
-        // why: on agent swap, keep "My Devices" but drop the transient "Other Devices"
-        // Those belong to the previous agent's network scan; the new agent's start_discovery re-populates its own.
-        //
-        // Also drop "My Devices" stamped by a different agent than the one we're swapping to
-        // (target_agent_id, passed by the caller since the live agent hasn't been repointed yet
-        // at this point): otherwise a device first discovered under agent A survives every swap
-        // with a stale printer_agent_id, stays hidden from every agent's filtered list, and only
-        // gets re-tagged if something happens to delete and re-create it (e.g. account logout).
-        // Dropping it here instead lets the new agent's start_discovery re-insert and re-stamp it
-        // like any other fresh device.
-        const auto my = get_my_machine_list();
+        // Device entries are now scoped by printer_agent_id when they are presented. Keep
+        // agent-owned discoveries across a switch so agents without automatic discovery (and
+        // plugins whose devices have not received an access code yet) do not lose their list.
+        // Entries without an owner are legacy/unscoped and cannot safely be shown.
        for (auto it = localMachineList.begin(); it != localMachineList.end();)
        {
-            const bool is_my_device = my.find(it->first) != my.end();
-            const bool agent_mismatch = !target_agent_id.empty() && it->second &&
-                                         it->second->printer_agent_id != target_agent_id;
-            if (!is_my_device || agent_mismatch)
+            if (!it->second || it->second->printer_agent_id.empty())
            {
                delete it->second;
                it = localMachineList.erase(it);
@@ -568,8 +571,22 @@ namespace Slic3r
    {
        BOOST_LOG_TRIVIAL(info) << "set_selected_machine=" << dev_id
            << " cur_selected=" << selected_machine;
-        auto my_machine_list = get_my_machine_list();
+        auto my_machine_list = get_my_machine_list(get_current_printer_agent_id());
        auto it = my_machine_list.find(dev_id);
+        BOOST_LOG_TRIVIAL(info) << "Orca diagnostic: set_selected_machine lookup dev_id=" << dev_id
+                                << " found=" << (it != my_machine_list.end())
+                                << " my_machine_count=" << my_machine_list.size()
+                                << " current_agent=" << get_current_printer_agent_id()
+                                << " provider=" << GUI::wxGetApp().get_printer_cloud_provider();
+        if (it != my_machine_list.end() && it->second) {
+            BOOST_LOG_TRIVIAL(info) << "Orca diagnostic: target machine dev_id=" << it->second->get_dev_id()
+                                    << " printer_agent_id=" << it->second->printer_agent_id
+                                    << " connection_type=" << it->second->connection_type()
+                                    << " dev_connection_type=" << it->second->dev_connection_type;
+        } else if (!dev_id.empty()) {
+            BOOST_LOG_TRIVIAL(warning) << "Orca diagnostic: target machine was not found in the current agent's machine list";
+            return false;
+        }

        // disconnect last if dev_id difference from previous one
        auto last_selected = my_machine_list.find(selected_machine);
@@ -580,7 +597,9 @@ namespace Slic3r
                m_agent->disconnect_printer();
            }
            else if (last_selected->second->connection_type() == "cloud") {
-                m_agent->set_user_selected_machine("");
+                const int result = m_agent->set_user_selected_machine("");
+                BOOST_LOG_TRIVIAL(info) << "Orca diagnostic: cleared previous cloud selection dev_id="
+                                        << selected_machine << " result=" << result;
            }
        }

@@ -632,7 +651,9 @@ namespace Slic3r
                    {
                        // diff dev_id, cloud => set_user_selected_machine(new)
                        BOOST_LOG_TRIVIAL(info) << "set_selected_machine: select new cloud machine, dev_id =" << dev_id;
-                        m_agent->set_user_selected_machine(dev_id);
+                        const int result = m_agent->set_user_selected_machine(dev_id);
+                        BOOST_LOG_TRIVIAL(info) << "Orca diagnostic: set new cloud selection dev_id="
+                                                << dev_id << " result=" << result;
                        it->second->reset();
                    }
                    else
@@ -660,6 +681,8 @@ namespace Slic3r

        selected_machine = dev_id;
        record_user_last_machine(selected_machine);
+        BOOST_LOG_TRIVIAL(info) << "Orca diagnostic: DeviceManager selection complete selected_machine="
+                                << selected_machine;
        return true;
    }

@@ -690,7 +713,9 @@ namespace Slic3r
            dev_list.push_back(it->first);
            BOOST_LOG_TRIVIAL(trace) << "add_user_subscribe: " << it->first;
        }
-        m_agent->add_subscribe(dev_list);
+        const int result = m_agent->add_subscribe(dev_list);
+        BOOST_LOG_TRIVIAL(info) << "Orca diagnostic: add_user_subscribe count=" << dev_list.size()
+                                << " result=" << result;
    }


@@ -703,7 +728,9 @@ namespace Slic3r
            dev_list.push_back(it->first);
            BOOST_LOG_TRIVIAL(trace) << "del_user_subscribe: " << it->first;
        }
-        m_agent->del_subscribe(dev_list);
+        const int result = m_agent->del_subscribe(dev_list);
+        BOOST_LOG_TRIVIAL(info) << "Orca diagnostic: del_user_subscribe count=" << dev_list.size()
+                                << " result=" << result;
    }

    void DeviceManager::subscribe_device_list(std::vector<std::string> dev_list)
@@ -822,7 +849,23 @@ namespace Slic3r
        try
        {
            json j = json::parse(body);
-            const std::string provider = GUI::wxGetApp().get_printer_cloud_provider();
+
+            const bool has_request_context = j.contains("provider") && j.contains("agent_id") && j.contains("generation");
+            const std::string provider = j.contains("provider") ? j["provider"].get<std::string>()
+                                                                   : GUI::wxGetApp().get_printer_cloud_provider();
+            const std::string agent_id = j.contains("agent_id") ? j["agent_id"].get<std::string>()
+                                                                  : get_current_printer_agent_id();
+            const std::uint64_t generation = j.value("generation", std::uint64_t(0));
+
+            if (has_request_context &&
+                (provider != GUI::wxGetApp().get_printer_cloud_provider() ||
+                 agent_id != get_current_printer_agent_id() ||
+                 generation != (m_agent ? m_agent->get_user_machine_list_generation() : 0))) {
+                BOOST_LOG_TRIVIAL(debug) << __FUNCTION__ << ": ignoring stale response provider="
+                                         << provider << " agent_id=" << agent_id
+                                         << " generation=" << generation;
+                return;
+            }

 #if !BBL_RELEASE_TO_PUBLIC
            BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << ": " << j;
@@ -845,11 +888,14 @@ namespace Slic3r
                        /* update field */
                        obj = iter->second;
                        obj->set_dev_id(dev_id);
+                        // A device can be rediscovered by a different agent after a preset
+                        // switch while retaining the same MachineObject instance.
+                        obj->printer_agent_id = agent_id;
                    }
                    else
                    {
                        obj = new MachineObject(this, m_agent, "", "", "");
-                        obj->printer_agent_id = get_current_printer_agent_id();
+                        obj->printer_agent_id = agent_id;
                        if (m_agent)
                        {
                            obj->set_bind_status(m_agent->get_user_name(provider));
@@ -864,6 +910,12 @@ namespace Slic3r

                    if (!obj) continue;

+                    // Orca cloud printers are only ever delivered through this REST
+                    // account list; tag them so DeviceManager's cloud/lan branches
+                    // (subscribe + deselect in set_selected_machine) treat them right.
+                    if (provider == ORCA_CLOUD_PROVIDER)
+                        obj->dev_connection_type = "cloud";
+
                    if (!elem["dev_id"].is_null())
                        obj->set_dev_id(elem["dev_id"].get<std::string>());
                    if (!elem["dev_name"].is_null())
@@ -895,6 +947,12 @@ namespace Slic3r
                        acc_code.erase(std::remove(acc_code.begin(), acc_code.end(), '\n'), acc_code.end());
                        obj->set_access_code(acc_code);
                    }
+
+                    BOOST_LOG_TRIVIAL(info) << "Orca diagnostic: parsed cloud machine dev_id=" << dev_id
+                                            << " name=" << obj->get_dev_name()
+                                            << " agent_id=" << obj->printer_agent_id
+                                            << " connection_type=" << obj->connection_type()
+                                            << " online=" << obj->m_is_online;
                }

                //remove MachineObject from userMachineList
@@ -910,6 +968,9 @@ namespace Slic3r
                        iterat++;
                    }
                }
+                BOOST_LOG_TRIVIAL(info) << "Orca diagnostic: parse_user_print_info complete provider=" << provider
+                                        << " parsed_count=" << new_list.size()
+                                        << " stored_count=" << userMachineList.size();
            }
        }
        catch (std::exception& e)
@@ -926,10 +987,14 @@ namespace Slic3r
        unsigned int http_code;
        std::string body;
        int result = m_agent->get_user_print_info(&http_code, &body, provider);
+        BOOST_LOG_TRIVIAL(info) << "Orca diagnostic: get_user_print_info provider=" << provider
+                                << " result=" << result << " http_code=" << http_code
+                                << " body_bytes=" << body.size();
        if (result == 0)
        {
            // parse_user_print_info and on_machine_alive (SSDP for discovery) both mutate the same userMachineList map.
            // on_machine_alive mutates the map on the UI thread, do the same for parse_user_print_info.
+            BOOST_LOG_TRIVIAL(info) << "Orca diagnostic: queueing parse_user_print_info on UI thread";
            Slic3r::GUI::wxGetApp().CallAfter([this, body]() { parse_user_print_info(body); });
        }
    }
@@ -74,10 +74,9 @@ public:
    void erase_user_machine(std::string dev_id) { userMachineList.erase(dev_id); }
    void clean_user_info(bool keep_local_selection = false);

-    // target_agent_id: id of the agent being swapped to (empty = no agent-mismatch check,
-    // just the original "drop Other Devices" behavior). Pass the incoming agent's id, not the
-    // live one - this runs before the live agent is repointed.
-    void clear_other_devices(const std::string& target_agent_id = "");
+    // Retain agent-owned LAN discoveries across a switch; the active-agent list filter keeps
+    // entries from other agents hidden while allowing them to reappear when switched back.
+    void clear_other_devices();

    void load_last_machine();
    void update_user_machine_list_info(const std::string& provider);
@@ -154,4 +153,4 @@ public:
 protected:
    virtual void on_timer(wxTimerEvent& event);
 };
-};
+};
@@ -4,6 +4,7 @@
 #include "I18N.hpp"
 #include "libslic3r/Time.hpp"
 #include "libslic3r/Thread.hpp"
+#include "slic3r/Utils/Http.hpp"
 #include "slic3r/Utils/NetworkAgent.hpp"
 #include "slic3r/Utils/NetworkAgentFactory.hpp"
 #include "GuiColor.hpp"
@@ -53,6 +54,7 @@
 #include "DeviceCore/DevStatus.h"
 #include "DeviceCore/DevUpgrade.h"

+#include "IPrinterAgent.hpp"

 #define CALI_DEBUG
 #define MINUTE_30 1800000    //ms
@@ -373,8 +375,22 @@ NozzleVolumeType convert_to_nozzle_type(const std::string &str)
 wxString MachineObject::get_printer_type_display_str() const
 {
    std::string display_name = DevPrinterConfigUtil::get_printer_display_name(printer_type);
+
+    // Bambu printers use m_resource_file_path + "/printers/" + type_str + ".json", which is a semantic that only works for their profiles.
+    // For any other profile, we can simply consult preset bundle if the model_id exists. 
+    if (display_name.empty()) {
+        for (const auto& [vendor_id, vendor] : GUI::wxGetApp().preset_bundle->vendors) {
+            for (const auto& model : vendor.models) {
+                if (printer_type == model.model_id)
+                    display_name = model.name;
+            }
+        }
+    }
+
    if (!display_name.empty())
        return display_name;
+    else if (printer_type == "orcasonar")
+        return "OrcaSonar Printer";
    else
        return _L("Unknown");
 }
@@ -1341,7 +1357,6 @@ int MachineObject::command_get_access_code() {
    return this->publish_json(j);
 }

-
 int MachineObject::command_request_push_all(bool request_now)
 {
    auto curr_time = std::chrono::system_clock::now();
@@ -1473,26 +1488,20 @@ int MachineObject::command_upgrade_module(std::string url, std::string module_ty

 int MachineObject::command_xyz_abs()
 {
-    return this->publish_gcode("G90 \n");
+    if (!m_agent) return -1;
+    return command_with_dialog(m_agent->command_xyz_abs(get_dev_id(), MachineObject::m_sequence_id++, is_lan_mode_printer()));
 }

 int MachineObject::command_auto_leveling()
 {
-    return this->publish_gcode("G29 \n");
+    if (!m_agent) return -1;
+    return command_with_dialog(m_agent->command_auto_leveling(get_dev_id(), MachineObject::m_sequence_id++, is_lan_mode_printer()));
 }

 int MachineObject::command_go_home()
 {
-    if (m_support_mqtt_homing)
-    {
-        json j;
-        j["print"]["command"] = "back_to_center";
-        j["print"]["sequence_id"] = std::to_string(MachineObject::m_sequence_id++);
-        return this->publish_json(j);
-    }
-
-    // gcode command
-    return this->is_in_printing() ? this->publish_gcode("G28 X\n") : this->publish_gcode("G28 \n");
+    if (!m_agent) return -1;
+    return command_with_dialog(m_agent->command_go_home(get_dev_id(), this->is_in_printing(), m_support_mqtt_homing, MachineObject::m_sequence_id++, is_lan_mode_printer()));
 }

 int MachineObject::command_task_partskip(std::vector<int> part_ids)
@@ -1614,23 +1623,14 @@ int MachineObject::command_stop_buzzer()

 int MachineObject::command_set_bed(int temp)
 {
-    if (m_support_mqtt_bet_ctrl)
-    {
-        json j;
-        j["print"]["command"] = "set_bed_temp";
-        j["print"]["temp"] = temp;
-        j["print"]["sequence_id"] = std::to_string(MachineObject::m_sequence_id++);
-        return this->publish_json(j);
-    }
-
-    std::string gcode_str = (boost::format("M140 S%1%\n") % temp).str();
-    return this->publish_gcode(gcode_str);
+    if (!m_agent) return -1;
+    return command_with_dialog(m_agent->command_set_bed(get_dev_id(), temp, m_support_mqtt_bet_ctrl, MachineObject::m_sequence_id++, is_lan_mode_printer()));
 }

 int MachineObject::command_set_nozzle(int temp)
 {
-    std::string gcode_str = (boost::format("M104 S%1%\n") % temp).str();
-    return this->publish_gcode(gcode_str);
+    if (!m_agent) return -1;
+    return command_with_dialog(m_agent->command_set_nozzle(get_dev_id(), temp, MachineObject::m_sequence_id++, is_lan_mode_printer()));
 }

 int MachineObject::command_set_nozzle_new(int nozzle_id, int temp)
@@ -1735,9 +1735,8 @@ int MachineObject::command_ams_user_settings(bool start_read_opt, bool tray_read

 int MachineObject::command_ams_calibrate(int ams_id)
 {
-    std::string gcode_cmd = (boost::format("M620 C%1% \n") % ams_id).str();
-    BOOST_LOG_TRIVIAL(trace) << "ams_debug: gcode_cmd" << gcode_cmd;
-    return this->publish_gcode(gcode_cmd);
+    if (!m_agent) return -1;
+    return command_with_dialog(m_agent->command_ams_calibrate(get_dev_id(), ams_id, MachineObject::m_sequence_id++, is_lan_mode_printer()));
 }

 int MachineObject::command_ams_filament_settings(int ams_id, int slot_id, std::string filament_id, std::string setting_id, std::string tray_color, std::string tray_type, int nozzle_temp_min, int nozzle_temp_max)
@@ -1775,9 +1774,8 @@ int MachineObject::command_ams_filament_settings(int ams_id, int slot_id, std::s

 int MachineObject::command_ams_refresh_rfid(std::string tray_id)
 {
-    std::string gcode_cmd = (boost::format("M620 R%1% \n") % tray_id).str();
-    BOOST_LOG_TRIVIAL(trace) << "ams_debug: gcode_cmd" << gcode_cmd;
-    return this->publish_gcode(gcode_cmd);
+    if (!m_agent) return -1;
+    return command_with_dialog(m_agent->command_ams_refresh_rfid(get_dev_id(), tray_id, MachineObject::m_sequence_id++, is_lan_mode_printer()));
 }

 int MachineObject::command_ams_refresh_rfid2(int ams_id,  int slot_id)
@@ -1790,12 +1788,17 @@ int MachineObject::command_ams_refresh_rfid2(int ams_id,  int slot_id)
    return this->publish_json(j);
 }

+int MachineObject::command_start_camera()
+{
+    if (!m_agent) return -1;
+    return m_agent->command_start_camera(get_dev_id());
+}
+

 int MachineObject::command_ams_select_tray(std::string tray_id)
 {
-    std::string gcode_cmd = (boost::format("M620 P%1% \n") % tray_id).str();
-    BOOST_LOG_TRIVIAL(trace) << "ams_debug: gcode_cmd" << gcode_cmd;
-    return this->publish_gcode(gcode_cmd);
+    if (!m_agent) return -1;
+    return command_with_dialog(m_agent->command_ams_select_tray(get_dev_id(), tray_id, MachineObject::m_sequence_id++, is_lan_mode_printer()));
 }

 int MachineObject::command_ams_control(std::string action)
@@ -1954,47 +1957,10 @@ int MachineObject::command_ams_air_print_detect(bool air_print_detect)

 int MachineObject::command_axis_control(std::string axis, double unit, double input_val, int speed)
 {
-    if (m_support_mqtt_axis_control)
-    {
-        int dir = input_val > 0 ? 1 : -1;
-        // i3-arch printers move the bed for Y/Z, so the on-screen direction is
-        // reversed — same negation the g-code fallback below applies.
-        if (!is_core_xy() && (axis.compare("Y") == 0 || axis.compare("Z") == 0)) {
-            dir = -dir;
-        }
-
-        json j;
-        j["print"]["command"] = "xyz_ctrl";
-        j["print"]["axis"] = axis;
-        j["print"]["dir"] = dir;
-        j["print"]["mode"] = (std::abs(input_val) >= 10) ? 1 : 0;
-        j["print"]["sequence_id"] = std::to_string(MachineObject::m_sequence_id++);
-        return this->publish_json(j);
-    }
-
-    double value = input_val;
-    if (!is_core_xy()) {
-        if ( axis.compare("Y") == 0
-            || axis.compare("Z")  == 0) {
-            value = -1.0 * input_val;
-        }
-    }
-
-    char cmd[256];
-    if (axis.compare("X") == 0
-        || axis.compare("Y") == 0
-        || axis.compare("Z") == 0) {
-        sprintf(cmd, "M211 S \nM211 X1 Y1 Z1\nM1002 push_ref_mode\nG91 \nG1 %s%0.1f F%d\nM1002 pop_ref_mode\nM211 R\n", axis.c_str(), value * unit, speed);
-    }
-    else if (axis.compare("E") == 0) {
-        sprintf(cmd, "M83 \nG0 %s%0.1f F%d\n", axis.c_str(), value * unit, speed);
-    }
-    else {
-        return -1;
-    }
-
-
-    return this->publish_gcode(cmd);
+    if (!m_agent) return -1;
+    return command_with_dialog(m_agent->command_axis_control(get_dev_id(), axis, unit, input_val, speed, is_core_xy(),
+                                                             m_support_mqtt_axis_control, MachineObject::m_sequence_id++,
+                                                             is_lan_mode_printer()));
 }

 int MachineObject::command_extruder_control(int nozzle_id, double val)
@@ -2619,7 +2585,12 @@ void MachineObject::reset()
            vt_slot.erase(vt_slot.begin() + 1);
        }
    }
-    subtask_ = nullptr;
+    // why: reset reuses MachineObject, so release its lazy subtask
+    // before dropping the pointer to prevent reconnect leaks.
+    if (subtask_) {
+        delete subtask_;
+        subtask_ = nullptr;
+    }
    has_extra_flow_type = false;
    m_partskip_ids.clear();
 }
@@ -2629,15 +2600,52 @@ void MachineObject::set_print_state(std::string status)
    print_status = status;
 }

+// why: printer agents can report progress without BBL cloud task identity.
+void MachineObject::update_print_progress(const json& value)
+{
+    if (value.is_string())
+        mc_print_percent = stoi(value.get<std::string>());
+    else if (value.is_number_integer())
+        mc_print_percent = value.get<int>();
+    else
+        return;
+
+    if (BBLSubTask* curr_task = get_subtask())
+        curr_task->task_progress = mc_print_percent;
+}
+
 int MachineObject::connect(bool use_openssl)
 {
    if (get_dev_ip().empty()) return -1;
-    std::string username = "bblp";
+    std::string username = m_agent ? m_agent->default_lan_username() : std::string();
    std::string password = get_access_code();

+    std::string port;
+    std::string host = Http::get_host_from_url(get_dev_ip(), &port);
+    std::string ca_file;
+
+    if (GUI::wxGetApp().preset_bundle) {
+        const auto& config = GUI::wxGetApp().preset_bundle->printers.get_edited_preset().config;
+        if (port.empty())
+            port = config.opt_string("printhost_port");
+        ca_file = config.opt_string("printhost_cafile");
+    }
+
+    if (host.empty())
+        host = get_dev_ip();
+
    if (m_agent) {
        try {
-            return m_agent->connect_printer(get_dev_id(), get_dev_ip(), username, password, use_openssl);
+            PrinterConnectionParams params{
+                get_dev_id(),
+                host,
+                port,
+                username,
+                password,
+                use_openssl,
+                ca_file
+            };
+            return m_agent->connect_printer(params);
        } catch (...) {
            ;
        }
@@ -2742,6 +2750,14 @@ int MachineObject::publish_json(const json& json_item, int qos, int flag)
        BOOST_LOG_TRIVIAL(error) << "publish_json: " << json_item.dump() << " code: " << rtn;
    }

+    // why: the agent is the only thing that knows what it can translate, so it reports
+    // not-supported in its return value and this - the single funnel every command_* builder
+    // passes through - is the one place that turns it into something the user sees. No list of
+    // unsupported commands is needed anywhere: an agent that has no case for a command says so.
+    if (rtn == ORCA_NETWORK_ERR_CMD_NOT_SUPPORTED || rtn == ORCA_NETWORK_ERR_CAP_NOT_AVAILABLE) {
+        show_unsupported_dlg(rtn);
+    }
+
    return rtn;
 }

@@ -3046,6 +3062,13 @@ int MachineObject::parse_json(std::string tunnel, std::string payload, bool key_
            }
        } catch (...) {}

+        try {
+            if (j.contains("info"))
+                parse_new_info2(j["info"]);
+        } catch (...) {
+            BOOST_LOG_TRIVIAL(error) << "parse_json: failed to parse OrcaSonar capability info";
+        }
+
        try {
            if (auto ptr = m_fila_system->GetAmsFirmwareSwitch().lock()) {
                ptr->ParseFirmwareSwitch(j);
@@ -3298,10 +3321,7 @@ int MachineObject::parse_json(std::string tunnel, std::string payload, bool key_
                        print_type = jj["print_type"].get<std::string>();
                    }
                    if (jj.contains("mc_percent")) {
-                        if (jj["mc_percent"].is_string())
-                            mc_print_percent = stoi(j["print"]["mc_percent"].get<std::string>());
-                        else if (jj["mc_percent"].is_number_integer())
-                            mc_print_percent = j["print"]["mc_percent"].get<int>();
+                        update_print_progress(jj["mc_percent"]);
                    }
                    if (jj.contains("mc_print_sub_stage")) {
                        if (jj["mc_print_sub_stage"].is_number_integer())
@@ -3471,6 +3491,9 @@ int MachineObject::parse_json(std::string tunnel, std::string payload, bool key_
                            this->task_id_ = jj["task_id"].get<std::string>();
                        }

+                        if (jj.contains("thumbnail_url") && jj["thumbnail_url"].is_string())
+                            m_agent_thumbnail_url = jj["thumbnail_url"].get<std::string>();
+
                        if (jj.contains("job_attr")) {
                            int jobAttr = jj["job_attr"].get<int>();
                            jobState_ =  get_flag_bits(jobAttr, 4, 4);
@@ -3516,7 +3539,6 @@ int MachineObject::parse_json(std::string tunnel, std::string payload, bool key_
                        update_slice_info(jj["project_id"].get<std::string>(), jj["profile_id"].get<std::string>(), jj["subtask_id"].get<std::string>(), plate_index);
                        BBLSubTask* curr_task = get_subtask();
                        if (curr_task) {
-                            curr_task->task_progress = mc_print_percent;
                            curr_task->printing_status = print_status;
                            curr_task->task_id = jj["subtask_id"].get<std::string>();
                        }
@@ -3819,6 +3841,7 @@ int MachineObject::parse_json(std::string tunnel, std::string payload, bool key_
                                        has_ipcam = true;
                                    } else {
                                        has_ipcam = false;
+                                        webcam_stream_url.clear();
                                    }
                                }
                                if (ipcam.contains("resolution")) {
@@ -3853,6 +3876,9 @@ int MachineObject::parse_json(std::string tunnel, std::string payload, bool key_
                                    liveview_local = local_rtsp_url.empty() ? LVL_None : local_rtsp_url == "disable"
                                            ? LVL_Disable : boost::algorithm::starts_with(local_rtsp_url, "rtsps") ? LVL_Rtsps : LVL_Rtsp;
                                }
+                                if (ipcam.contains("stream_url") && ipcam["stream_url"].is_string()) {
+                                    webcam_stream_url = ipcam["stream_url"].get<std::string>();
+                                }
                                if (ipcam.contains("tutk_server")) {
                                    tutk_state = ipcam["tutk_server"].get<std::string>();
                                }
@@ -5432,6 +5458,86 @@ void MachineObject::parse_new_info(json print)
    }
 }

+void MachineObject::parse_new_info2(const json& info)
+{
+    if (!info.is_object() || info.value("command", "") != "get_capabilities")
+        return;
+
+    const auto capabilities_it = info.find("capabilities");
+    if (capabilities_it == info.end() || !capabilities_it->is_object())
+        return;
+    const auto flags_it = capabilities_it->find("flags");
+    if (flags_it == capabilities_it->end() || !flags_it->is_object())
+        return;
+
+    const json& flags = *flags_it;
+    BOOST_LOG_TRIVIAL(info) << "parse_new_info2: OrcaSonar capability flags=" << flags.dump();
+
+    auto parse_bool = [&flags](const char* name, bool& target) {
+        const auto it = flags.find(name);
+        if (it != flags.end() && it->is_boolean())
+            target = it->get<bool>();
+    };
+
+    parse_bool("support_send_to_sd", is_support_send_to_sdcard);
+    parse_bool("support_filament_backup", is_support_filament_backup);
+    parse_bool("support_update_remain", is_support_update_remain);
+    parse_bool("support_auto_recovery_step_loss", is_support_auto_recovery_step_loss);
+    parse_bool("support_ams_humidity", is_support_ams_humidity);
+    parse_bool("support_prompt_sound", is_support_prompt_sound);
+    parse_bool("support_filament_tangle_detect", is_support_filament_tangle_detect);
+    parse_bool("support_1080dpi", is_support_1080dpi);
+    parse_bool("support_cloud_print_only", is_support_cloud_print_only);
+    parse_bool("support_command_ams_switch", is_support_command_ams_switch);
+    parse_bool("support_mqtt_alive", is_support_mqtt_alive);
+    parse_bool("support_motor_noise_cali", is_support_motor_noise_cali);
+    parse_bool("support_timelapse", is_support_timelapse);
+    parse_bool("support_user_preset", is_support_user_preset);
+    parse_bool("support_refresh_nozzle", is_support_refresh_nozzle);
+    parse_bool("support_flow_calibration", is_support_flow_calibration);
+    parse_bool("support_build_plate_marker_detect", is_support_build_plate_marker_detect);
+    parse_bool("support_nozzle_blob_detect", is_support_nozzle_blob_detection);
+
+    if (!m_manager->IsMultiMachineEnabled() && !is_support_agora)
+        parse_bool("support_tunnel_mqtt", is_support_tunnel_mqtt);
+
+    const auto bed_leveling_it = flags.find("support_bed_leveling");
+    if (bed_leveling_it != flags.end() && bed_leveling_it->is_number_integer())
+        is_support_bed_leveling = bed_leveling_it->get<int>();
+
+    auto copy_bool = [&flags](json& target, const char* name) {
+        const auto it = flags.find(name);
+        if (it != flags.end() && it->is_boolean())
+            target[name] = *it;
+    };
+
+    // The capability manifest uses an object for this range, while the legacy
+    // DeviceCore parser consumes a boolean plus a two-element range array.
+    json device_config;
+    copy_bool(device_config, "support_chamber");
+    copy_bool(device_config, "support_first_layer_inspect");
+    copy_bool(device_config, "support_ai_monitoring");
+    copy_bool(device_config, "support_lidar_calibration");
+    const auto chamber_edit_it = flags.find("support_chamber_temp_edit");
+    if (chamber_edit_it != flags.end() && chamber_edit_it->is_boolean()) {
+        device_config["support_chamber_temp_edit"] = *chamber_edit_it;
+    } else if (chamber_edit_it != flags.end() && chamber_edit_it->is_object()) {
+        const auto min_it = chamber_edit_it->find("min");
+        const auto max_it = chamber_edit_it->find("max");
+        if (min_it != chamber_edit_it->end() && max_it != chamber_edit_it->end() && min_it->is_number() && max_it->is_number()) {
+            device_config["support_chamber_temp_edit"]       = true;
+            device_config["support_chamber_temp_edit_range"] = {*min_it, *max_it};
+        }
+    }
+
+    json fan_config;
+    copy_bool(fan_config, "support_aux_fan");
+    copy_bool(fan_config, "support_chamber_fan");
+
+    m_config->ParseConfig(device_config);
+    m_fan->ParseV2_0(fan_config);
+}
+
 static bool is_hex_digit(char c) {
    return std::isxdigit(static_cast<unsigned char>(c)) != 0;
 }
@@ -5937,6 +6043,15 @@ bool MachineObject::HasAms() const
    return m_fila_system->HasAms();
 }

+int MachineObject::command_with_dialog(int cmd_result)
+{
+    if (!m_agent)
+        return -1;
+    if (cmd_result == ORCA_NETWORK_ERR_CMD_NOT_SUPPORTED || cmd_result == ORCA_NETWORK_ERR_CAP_NOT_AVAILABLE)
+        show_unsupported_dlg(cmd_result);
+    return cmd_result;
+}
+
 void change_the_opacity(wxColour& colour)
 {
    if (colour.Alpha() == 255) {
@@ -18,6 +18,7 @@
 #include "boost/bimap/bimap.hpp"
 #include "libslic3r/calib.hpp"
 #include "libslic3r/Utils.hpp"
+#include "slic3r/Utils/PrinterNetworkTypes.hpp"

 #include "DeviceCore/DevDefs.h"
 #include "DeviceCore/DevConfigUtil.h"
@@ -100,7 +101,6 @@ struct DevPrintTaskRatingInfo;
 // given nozzle diameter (mm), bucketed per nozzle size to mirror the printer firmware.
 bool is_stringing_prone_filament(const std::string& filament_id, float nozzle_diameter);

-
 class MachineObject
 {
 private:
@@ -307,7 +307,7 @@ public:
    bool  ams_support_virtual_tray { true };
    time_t ams_user_setting_start = 0;
    time_t ams_switch_filament_start = 0;
-    AmsStatusMain ams_status_main;
+    AmsStatusMain ams_status_main = AmsStatusMain::AMS_STATUS_MAIN_IDLE;
    int   ams_status_sub;
    int   ams_version = 0;

@@ -547,30 +547,12 @@ public:
    bool xcam_first_layer_inspector { false };
    time_t  xcam_first_layer_hold_start = 0;
    std::string local_rtsp_url;
+    std::string webcam_stream_url;
    std::string tutk_state;
-    enum LiveviewLocal {
-        LVL_None,
-        LVL_Disable,
-        LVL_Local,
-        LVL_Rtsps,
-        LVL_Rtsp
-    } liveview_local{ LVL_None };
-    enum LiveviewRemote {
-        LVR_None,
-        LVR_Tutk,
-        LVR_Agora,
-        LVR_TutkAgora
-    } liveview_remote{ LVR_None };
-    enum FileLocal {
-        FL_None,
-        FL_Local
-    } file_local{ FL_None };
-    enum FileRemote {
-        FR_None,
-        FR_Tutk,
-        FR_Agora,
-        FR_TutkAgora
-    } file_remote{ FR_None };
+    LiveviewLocal liveview_local{ LiveviewLocal::LVL_None };
+    LiveviewRemote liveview_remote{ LiveviewRemote::LVR_None};
+    FileLocal file_local{ FileLocal::FL_None };
+    FileRemote file_remote{ FileRemote::FR_None };

    enum PlateMakerDectect : int
    {
@@ -708,6 +690,8 @@ public:
    std::string  subtask_id_;
    std::string  job_id_;
    std::string  last_subtask_id_;
+    // note: printer-agent-supplied thumbnail url, empty when the agent supplies none.
+    std::string  m_agent_thumbnail_url;
    BBLSliceInfo* slice_info {nullptr};
    boost::thread* get_slice_info_thread { nullptr };
    boost::thread* get_model_task_thread { nullptr };
@@ -765,6 +749,7 @@ public:
    int command_set_printer_nozzle(std::string nozzle_type, float diameter);
    int command_set_printer_nozzle2(int id, std::string nozzle_type, float diameter);
    int command_get_access_code();
+    int command_start_camera();
    int command_ack_proceed(json& proceed);
    int command_purification_disable();
    int command_dont_remind_next_time(json& mqtt_guard_json);
@@ -894,6 +879,7 @@ public:
    static bool is_in_printing_status(std::string status);

    void set_print_state(std::string status);
+    void update_print_progress(const json& value);

    bool is_connected();
    bool is_connecting();
@@ -961,6 +947,7 @@ public:
    /*for parse new info*/
    bool check_enable_np(const json& print) const;
    void parse_new_info(json print);
+    void parse_new_info2(const json& info);
    int  get_flag_bits(std::string str, int start, int count = 1) const;
    uint32_t get_flag_bits_no_border(std::string str, int start_idx, int count = 1) const;
    int get_flag_bits(int num, int start, int count = 1, int base = 10) const;
@@ -989,7 +976,7 @@ public:
    void command_set_save_remote_print_file_to_storage(bool save);

 private:
-
+    int command_with_dialog(int cmd_result);
    /* xcam door open check*/
    bool is_support_door_open_check = false;
    DoorOpenCheckState xcam_door_open_check  = DoorOpenCheckState::DOOR_OPEN_CHECK_DISABLE;
@@ -0,0 +1,103 @@
+#include "DockPanel.hpp"
+
+#include "GUI_App.hpp"
+#include "Plater.hpp"
+#include "Widgets/WebHosting.hpp"
+
+#include <wx/weakref.h>
+
+#include <algorithm>
+#include <utility>
+
+namespace Slic3r { namespace GUI {
+
+std::string plugin_pane_name(const std::string& plugin_key, const std::string& title)
+{
+    std::string name = "plugin:" + plugin_key + ":" + title;
+    std::replace_if(name.begin(), name.end(), [](char c) { return c == '|' || c == ';' || c == '=' || c == '\\'; }, '_');
+    return name;
+}
+
+DockPanel::DockPanel(wxWindow*          parent,
+                     const std::string& html,
+                     MessageHandler     on_message,
+                     CloseHandler       on_close,
+                     CloseHandler       on_destroyed)
+    : WebPanel(parent, web_hosting::orca_bridge_script())
+    , m_html(html)
+    , m_on_message(std::move(on_message))
+    , m_on_close(std::move(on_close))
+    , m_on_destroyed(std::move(on_destroyed))
+{
+    // A link asking for a new window has nowhere to open from a docked panel.
+    browser()->Bind(wxEVT_WEBVIEW_NEWWINDOW, [](wxWebViewEvent& event) { event.Veto(); });
+}
+
+DockPanel::~DockPanel()
+{
+    if (m_on_destroyed)
+        m_on_destroyed();
+}
+
+bool DockPanel::on_page_message(const std::string& kind, const nlohmann::json& data)
+{
+    if (kind == "message") {
+        if (m_on_message)
+            m_on_message(data);
+        return true;
+    }
+    if (kind == "close") {
+        request_close();
+        return true;
+    }
+    return false;
+}
+
+void DockPanel::push_message(const nlohmann::json& data)
+{
+    if (!m_closing)
+        post_to_page(data.dump(-1, ' ', false, nlohmann::json::error_handler_t::replace));
+}
+
+void DockPanel::fire_close()
+{
+    if (m_closing)
+        return;
+    m_closing = true;
+    if (m_on_close) {
+        CloseHandler on_close = std::move(m_on_close);
+        m_on_close            = nullptr;
+        on_close();
+    }
+}
+
+void DockPanel::request_close()
+{
+    if (m_closing)
+        return;
+    fire_close();
+    // A page-requested close arrives inside the web view's script callback, so destroy later; another
+    // close path may have destroyed the panel by then.
+    wxWeakRef<DockPanel> self(this);
+    CallAfter([self]() {
+        if (self)
+            self->remove_pane();
+    });
+}
+
+void DockPanel::destroy_silently()
+{
+    m_closing  = true;
+    m_on_close = nullptr;
+    remove_pane();
+}
+
+void DockPanel::remove_pane()
+{
+    if (Plater* plater = wxGetApp().plater())
+        plater->remove_dock_pane(this);
+    else
+        Destroy();
+}
+
+}} // namespace Slic3r::GUI
@@ -0,0 +1,54 @@
+#pragma once
+
+#include "WebPanel.hpp"
+
+#include <functional>
+#include <string>
+
+namespace Slic3r { namespace GUI {
+
+// Stable across sessions so the saved layout finds the pane; free of wxAuiManager layout delimiters.
+std::string plugin_pane_name(const std::string& plugin_key, const std::string& title);
+
+// A WebPanel docked in the Plater, on the plugin-window bridge minus submit. It can be destroyed
+// without the GIL, so its hooks must not capture pybind11 objects.
+class DockPanel : public WebPanel
+{
+public:
+    using MessageHandler = std::function<void(const nlohmann::json& data)>;
+    using CloseHandler   = std::function<void()>;
+
+    // on_close fires once, on a user or page close. on_destroyed runs on every destruction and must
+    // touch host-side state only.
+    DockPanel(wxWindow*          parent,
+              const std::string& html,
+              MessageHandler     on_message,
+              CloseHandler       on_close,
+              CloseHandler       on_destroyed);
+    ~DockPanel() override;
+
+    // Main thread only.
+    void push_message(const nlohmann::json& data);
+    // Fires on_close, then removes the pane.
+    void request_close();
+    // Removes the pane without on_close, for plugin unload. Destroys at once: unload always comes from
+    // the host, never from this panel's own callbacks.
+    void destroy_silently();
+    // Fires on_close at most once; also run by the pane's own close button.
+    void fire_close();
+
+protected:
+    std::optional<std::string> page_html() override { return m_html; }
+    bool on_page_message(const std::string& kind, const nlohmann::json& data) override;
+
+private:
+    void remove_pane();
+
+    std::string    m_html;
+    bool           m_closing{false};
+    MessageHandler m_on_message;
+    CloseHandler   m_on_close;
+    CloseHandler   m_on_destroyed;
+};
+
+}} // namespace Slic3r::GUI
@@ -4,6 +4,7 @@
 #include "libslic3r/Platform.hpp"
 #include "GUI_App.hpp"
 #include "Shortcuts.hpp"
+#include "DeviceCore/DevConfigUtil.h"
 #include "BindDialog.hpp"
 #include "DeviceManager.hpp"
 #include "HMS.hpp"
@@ -24,7 +25,6 @@
 #include <boost/locale/encoding_utf.hpp>
 #include <boost/log/detail/native_typeof.hpp>
 #include <libslic3r/Config.hpp>
-#include <mutex>
 #include <slic3r/plugin/PythonPluginInterface.hpp>
 #include <wx/event.h>

@@ -41,9 +41,11 @@
 #include <iterator>
 #include <exception>
 #include <cstdlib>
+#include <mutex>
 #include <regex>
 #include <thread>
 #include <string_view>
+
 #include <boost/algorithm/string/predicate.hpp>
 #include <boost/algorithm/string.hpp>
 #include <boost/format.hpp>
@@ -88,7 +90,6 @@
 #include "libslic3r/Thread.hpp"
 #include "libslic3r/miniz_extension.hpp"
 #include "libslic3r/Utils.hpp"
-#include "libslic3r/Color.hpp"
 #include "slic3r/plugin/PluginManager.hpp"
 #include "slic3r/plugin/host/PluginHostUi.hpp"
 #include "slic3r/plugin/PythonInterpreter.hpp"
@@ -108,19 +109,18 @@
 #include "../Utils/PrintHost.hpp"
 #include "../Utils/Process.hpp"
 #include "../Utils/wxInspectorPlugins/Registration.hpp"
-#include "../Utils/MacDarkMode.hpp"
 #include "../Utils/Http.hpp"
 #include "../Utils/InstanceID.hpp"
 #include "../Utils/UndoRedo.hpp"
 #include "slic3r/Config/Snapshot.hpp"
 #include "Preferences.hpp"
 #include "Tab.hpp"
-#include "SysInfoDialog.hpp"
 #include "UpdateDialogs.hpp"
 #include "Mouse3DController.hpp"
 #include "RemovableDriveManager.hpp"
 #include "InstanceCheck.hpp"
 #ifdef __APPLE__
+#include "../Utils/MacDarkMode.hpp"
 #include "DeepLinkHandlerMac.h"
 #endif
 #include "NotificationManager.hpp"
@@ -129,8 +129,6 @@
 #include "PrintHostDialogs.hpp"
 #include "NetworkPluginDialog.hpp"
 #include "DesktopIntegrationDialog.hpp"
-#include "SendSystemInfoDialog.hpp"
-#include "ParamsDialog.hpp"
 #include "KBShortcutsDialog.hpp"
 #include "DownloadProgressDialog.hpp"
 #include "TroubleshootDialog.hpp"
@@ -141,7 +139,6 @@
 #include "Widgets/ProgressDialog.hpp"

 //BBS: DailyTip and UserGuide Dialog
-#include "WebDownPluginDlg.hpp"
 #include "WebGuideDialog.hpp"
 #include "ReleaseNote.hpp"
 #include "PrivacyUpdateDialog.hpp"
@@ -2388,14 +2385,8 @@ bool GUI_App::is_blocking_printing(MachineObject *obj_)
 {
    DeviceManager *dev = Slic3r::GUI::wxGetApp().getDeviceManager();
    if (!dev) return true;
-    std::string target_model;
    if (obj_ == nullptr) {
        obj_ = dev->get_selected_machine();
-        if (obj_) {
-            target_model = obj_->printer_type;
-        }
-    } else {
-        target_model = obj_->printer_type;
    }

    if (!obj_)
@@ -2406,14 +2397,7 @@ bool GUI_App::is_blocking_printing(MachineObject *obj_)
    PresetBundle *preset_bundle = wxGetApp().preset_bundle;
    std::string    source_model  = preset_bundle->printers.get_edited_preset().get_printer_type(preset_bundle);

-    if (source_model != target_model) {
-        std::vector<std::string>      compatible_machine = obj_->get_compatible_machine();
-        vector<std::string>::iterator it                 = find(compatible_machine.begin(), compatible_machine.end(), source_model);
-        if (it == compatible_machine.end()) {
-            return true;
-        }
-    }
-    return false;
+    return !DevPrinterConfigUtil::is_printer_model_compatible(source_model, *obj_);
 }

 // If formatted for github, plaintext with OpenGL extensions enclosed into <details>.
@@ -3968,20 +3952,16 @@ void GUI_App::set_live_printer_agent(std::shared_ptr<IPrinterAgent> agent)
        m_agent->set_user_selected_machine("");
        // note: belt-and-suspenders (precedent: DeviceManagerRefresher::on_timer)
        dev->OnSelectedMachineLost(); // why: clear stale sidebar sync-status / AMS
-        // why: drop stale LAN discoveries; keep My Devices, but only those belonging to the
-        // agent we're about to swap to, so a device stamped by the outgoing agent doesn't
-        // linger hidden - the new agent's start_discovery re-inserts and re-stamps it fresh.
-        // agent is null when clearing the live agent entirely (e.g. plugin unload); there's no
-        // target to filter against then, so fall back to the original "keep all My Devices"
-        // behavior rather than guessing.
-        dev->clear_other_devices(agent ? agent->get_agent_info().id : std::string());
+        // why: retain agent-owned LAN discoveries so agents without automatic discovery (for
+        // example the Moonraker-based Qidi/Snapmaker agents) can reuse them after a switch.
+        dev->clear_other_devices();
    }

    m_agent->set_printer_agent(agent);
    sidebar().update_all_preset_comboboxes();
 }

-std::string GUI_App::resolve_printer_agent_id(const std::string& stored_id)
+std::string GUI_App::resolve_printer_agent_id(const std::string& stored_id) const
 {
    if (!stored_id.empty())
        return stored_id;
@@ -4017,6 +3997,7 @@ void GUI_App::switch_printer_agent()

    std::string log_dir        = data_dir();
    std::string cloud_agent_id = agent_info.id == BBL_PRINTER_AGENT_ID ? BBL_CLOUD_PROVIDER : ORCA_CLOUD_PROVIDER;
+    BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << " " << agent_info.id;
    std::shared_ptr<ICloudServiceAgent> cloud_agent = m_agent->get_cloud_agent(cloud_agent_id);

    // Create new printer agent via registry
@@ -4030,8 +4011,10 @@ void GUI_App::switch_printer_agent()
        return;
    }

-    // The factory caches agents per ID, so an identical pointer means the agent type is unchanged.
-    if (m_agent->get_printer_agent() == new_printer_agent) {
+    // Compare the registered IDs, not only the implementation pointer. Different registry IDs
+    // may intentionally be backed by the same implementation object (especially for plugins).
+    const auto current_printer_agent = m_agent->get_printer_agent();
+    if (current_printer_agent && current_printer_agent->get_agent_info().id == effective_agent_id) {
        // Orca: the agent type is unchanged (e.g. switching between two Moonraker/Klipper
        // printer presets), so the selected machine and the agent's cached device_info still
        // point at the previously active printer preset. Re-select the machine when the new
@@ -5012,14 +4995,16 @@ bool GUI_App::is_user_login(const std::string& provider/* = ORCA_CLOUD_PROVIDER*
    return false;
 }

-const std::string& GUI_App::get_printer_cloud_provider() const
+std::string GUI_App::get_printer_cloud_provider() const
 {
-    // Orca todo: this need to be revisted. currently it is mainly used for device manager and related clausses and only bambu machines use them.
-    // 
-    return BBL_CLOUD_PROVIDER;
+    const std::string agent_id = resolve_printer_agent_id(
+        preset_bundle ? preset_bundle->printers.get_edited_preset().config.opt_string("printer_agent")
+                      : std::string());
+    return agent_id == BBL_PRINTER_AGENT_ID ? BBL_CLOUD_PROVIDER : ORCA_CLOUD_PROVIDER;
 }


+
 bool GUI_App::check_login(const std::string& provider/* = ORCA_CLOUD_PROVIDER*/)
 {
    bool result = false;
@@ -23,9 +23,6 @@
 #include <wx/snglinst.h>
 #include <wx/msgdlg.h>

-#include <mutex>
-#include <stack>
-
 //#define BBL_HAS_FIRST_PAGE          1
 #define STUDIO_INACTIVE_TIMEOUT     15*60*1000
 #define LOG_FILES_MAX_NUM           30
@@ -378,7 +375,7 @@ public:
    // Reconcile the live printer agent with the stored preset selection.
    void switch_printer_agent();

-    std::string resolve_printer_agent_id(const std::string& stored_id);
+    std::string resolve_printer_agent_id(const std::string& stored_id) const;
    // ORCA TODO: in the future, bbl presets should specify "bbl" printer agent id
    // then, all resolve and canonical would just be ORCA<->""
    std::string canonical_printer_agent_id(const std::string& picked_id);
@@ -504,7 +501,7 @@ public:
    bool            check_login(const std::string& provider = ORCA_CLOUD_PROVIDER);
    void            get_login_info(const std::string& provider = ORCA_CLOUD_PROVIDER);
    bool            is_user_login(const std::string& provider = ORCA_CLOUD_PROVIDER);
-    const std::string& get_printer_cloud_provider() const;
+    std::string      get_printer_cloud_provider() const;

    void            request_user_login(int online_login = 0, const std::string& provider = ORCA_CLOUD_PROVIDER);
    void            request_user_handle(int online_login = 0, const std::string& provider = ORCA_CLOUD_PROVIDER);
@@ -0,0 +1,26 @@
+#pragma once
+
+#include <wx/mediactrl.h>
+#include <wx/uri.h>
+
+namespace Slic3r { namespace GUI {
+
+class IMediaController
+{
+public:
+    virtual ~IMediaController() = default;
+
+    virtual void Load(wxURI url) = 0;
+
+    virtual void Play() = 0;
+
+    virtual void Stop() = 0;
+
+    virtual wxMediaState GetState() { return wxMediaState{}; }
+
+    virtual int GetLastError() const { return {}; };
+
+    virtual wxSize GetVideoSize() const { return {}; };
+};
+
+}} // namespace Slic3r::GUI
@@ -14,6 +14,7 @@

 #include "slic3r/Utils/FileTransferUtils.hpp"
 #include "slic3r/Utils/BBLNetworkPlugin.hpp"
+#include "NetworkAgent.hpp"

 namespace Slic3r {
 namespace GUI {
@@ -203,7 +204,7 @@ void PrintJob::process(Ctl &ctl)
    params.dev_ip = m_dev_ip;
    params.use_ssl_for_ftp  = m_local_use_ssl_for_ftp;
    params.use_ssl_for_mqtt  = m_local_use_ssl;
-    params.username = "bblp";
+    params.username = m_agent->default_lan_username();
    params.password = m_access_code;

    // check access code and ip address
@@ -126,7 +126,7 @@ void SendJob::process(Ctl &ctl)
    if (m_is_check_mode) {
        PrintParams verify_params;
        verify_params.dev_ip           = m_dev_ip;
-        verify_params.username         = "bblp";
+        verify_params.username         = agent->default_lan_username();
        verify_params.password         = m_access_code;
        verify_params.use_ssl_for_ftp  = m_local_use_ssl_for_ftp;
        verify_params.use_ssl_for_mqtt = m_local_use_ssl;
@@ -211,7 +211,7 @@ void SendJob::process(Ctl &ctl)

    // local print access
    params.dev_ip = m_dev_ip;
-    params.username = "bblp";
+    params.username = agent->default_lan_username();
    params.password = m_access_code;
    params.use_ssl_for_ftp = m_local_use_ssl_for_ftp;
    params.use_ssl_for_mqtt = m_local_use_ssl;
@@ -1189,6 +1189,8 @@ void MainFrame::shutdown()
    if (m_project != nullptr)
        m_project->shutdown();
    m_plugin_pages.shutdown();
+    if (m_plater != nullptr)
+        m_plater->remove_dock_panes();
 #ifdef __WXGTK__
    // Edge panels are child windows — wxWidgets destroys them automatically.
    m_edge_bottom = nullptr;
@@ -3424,11 +3426,6 @@ void MainFrame::init_menubar_as_editor()
            wxGetApp().open_preferences();
        },
        "", nullptr, []() { return true; }, this, 1);
-    parent_menu->AppendSeparator();
-    append_shortcut_item(
-        parent_menu, Shortcut::SpeedDial, false, _L("Open speed dial"), "",
-        [](wxCommandEvent &) { wxGetApp().open_speed_dial(); },
-        "", nullptr, []() { return true; }, this);
    //parent_menu->Insert(1, preference_item);
 #endif
    // Help menu
@@ -3454,7 +3451,7 @@ void MainFrame::init_menubar_as_editor()
    top_menu->AppendSeparator();

    append_shortcut_item(
-        top_menu, Shortcut::SpeedDial, false, _L("Open speed dial"), "",
+        top_menu, Shortcut::SpeedDial, false, _L("Open Speed Dial"), "",
        [](wxCommandEvent &) { wxGetApp().open_speed_dial(); },
        "", nullptr, []() { return true; }, this);
    top_menu->AppendSeparator();
@@ -3561,7 +3558,7 @@ void MainFrame::init_menubar_as_editor()
    // On Mac, the Apple menu ignores non-standard custom items, so add Preset Bundle to the File menu
    fileMenu->AppendSeparator();
    append_shortcut_item(
-        fileMenu, Shortcut::SpeedDial, false, _L("Open speed dial"), "",
+        fileMenu, Shortcut::SpeedDial, false, _L("Open Speed Dial"), "",
        [](wxCommandEvent&) { wxGetApp().open_speed_dial(); },
        "", nullptr, []() { return true; }, this);
    append_menu_item(
@@ -4388,7 +4385,7 @@ void MainFrame::load_printer_url()
        if (auto *device_manager = wxGetApp().getDeviceManager()) {
            auto *machine = device_manager->get_selected_machine();
            if (!machine) {
-                auto machines = device_manager->get_my_machine_list();
+                auto machines = device_manager->get_my_machine_list(device_manager->get_current_printer_agent_id());
                if (machines.size() == 1)
                    machine = machines.begin()->second;
            }
@@ -1,4 +1,6 @@
 #include "MediaPlayCtrl.h"
+#include "WebMediaController.hpp"
+#include "IPrinterAgent.hpp"
 #include "Widgets/Button.hpp"
 #include "Widgets/CheckBox.hpp"
 #include "Widgets/Label.hpp"
@@ -7,6 +9,7 @@
 #include "DeviceManager.hpp"
 #include "DeviceCore/DevConfigUtil.h"
 #include "slic3r/Utils/NetworkAgent.hpp"
+#include "slic3r/Utils/NetworkAgentFactory.hpp"
 #include "libslic3r/Thread.hpp"
 #include "libslic3r/AppConfig.hpp"
 #include "I18N.hpp"
@@ -15,11 +18,15 @@
 #include "slic3r/Utils/BBLNetworkPlugin.hpp"


+#include <algorithm>
+
 #include <boost/lexical_cast.hpp>
 #include <boost/log/trivial.hpp>
 #include <boost/nowide/cstdio.hpp>
 #include <boost/nowide/fstream.hpp>
 #include <boost/nowide/utf8_codecvt.hpp>
+#include <slic3r/GUI/DeviceManager.hpp>
+#include <wx/mediactrl.h>
 #undef pid_t
 #include <boost/process.hpp>
 #ifdef __WIN32__
@@ -48,6 +55,7 @@ namespace GUI {
 MediaPlayCtrl::MediaPlayCtrl(wxWindow *parent, wxMediaCtrl3 *media_ctrl, const wxPoint &pos, const wxSize &size)
    : wxPanel(parent, wxID_ANY, pos, size)
    , m_media_ctrl(media_ctrl)
+    , m_active_media_controller(media_ctrl)
 {
    SetLabel("MediaPlayCtrl");
    SetBackgroundColour(*wxWHITE);
@@ -94,7 +102,10 @@ MediaPlayCtrl::MediaPlayCtrl(wxWindow *parent, wxMediaCtrl3 *media_ctrl, const w
    });

    m_button_play->Bind(wxEVT_COMMAND_BUTTON_CLICKED, [this](auto &e) { TogglePlay(); });
-    m_button_play->Bind(wxEVT_RIGHT_UP, [this](auto & e) { m_media_ctrl->Play(); });
+    m_button_play->Bind(wxEVT_RIGHT_UP, [this](auto & e) {
+        if (m_active_media_controller)
+            m_active_media_controller->Play();
+    });
    // Orca: live-view FAQ link binding removed (vendor URL)

    Bind(wxEVT_RIGHT_UP, [this](auto & e) {
@@ -139,9 +150,12 @@ MediaPlayCtrl::MediaPlayCtrl(wxWindow *parent, wxMediaCtrl3 *media_ctrl, const w

 MediaPlayCtrl::~MediaPlayCtrl()
 {
+    if (m_webrtc_ctrl)
+        m_webrtc_ctrl->Stop();
+    m_media_ctrl->EndExternalStream();
    {
        boost::unique_lock lock(m_mutex);
-        m_tasks.push_back("<exit>");
+        m_tasks.push_back({"<exit>", nullptr});
        m_cond.notify_all();
    }
    while (!m_thread.try_join_for(boost::chrono::milliseconds(10))) {
@@ -151,59 +165,144 @@ MediaPlayCtrl::~MediaPlayCtrl()
    BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << ": " << this;
 }

+void MediaPlayCtrl::SetWebMediaController(IMediaController *ctrl)
+{
+    m_web_ctrl = ctrl;
+    set_active_media_controller(current_mode());
+}
+
+void MediaPlayCtrl::set_active_media_controller(CameraStreamMode mode)
+{
+    switch (mode) {
+    case CameraStreamMode::http_snapshot:
+        if (auto *web_ctrl = dynamic_cast<WebMediaController *>(m_web_ctrl))
+            web_ctrl->set_mode(mode);
+        m_active_media_controller = m_web_ctrl;
+        break;
+    case CameraStreamMode::webrtc:
+        if (!m_webrtc_ctrl) {
+            m_webrtc_ctrl = std::make_unique<WebRtcMediaController>(
+                [this](const wxImage& image, wxSize size) { m_media_ctrl->SetExternalFrame(image, size); },
+                [this, token = std::weak_ptr<int>(m_token)](WebRtcMediaController::Status status) {
+                    if (token.expired())
+                        return;
+                    CallAfter([this, status] { on_webrtc_status(status); });
+                });
+        }
+        m_active_media_controller = m_webrtc_ctrl.get();
+        break;
+    default:
+        m_active_media_controller = m_media_ctrl;
+        break;
+    }
+}
+
+CameraStreamMode MediaPlayCtrl::current_mode() const
+{
+    auto agent = wxGetApp().getAgent();
+    return agent ? agent->get_camera_stream_mode() : CameraStreamMode::none;
+}
+
 void MediaPlayCtrl::SetMachineObject(MachineObject* obj)
 {
-    std::string machine = obj ? obj->get_dev_id() : "";
-    if (obj) {
-        m_camera_exists  = obj->has_ipcam;
-        m_dev_ver        = obj->get_ota_version();
-        m_lan_mode       = obj->is_lan_mode_printer();
-        m_lan_proto      = obj->liveview_local;
-        m_remote_proto   = obj->get_liveview_remote();
-        m_lan_ip         = obj->get_dev_ip();
-        m_lan_passwd     = obj->get_access_code();
-        m_device_busy    = obj->is_camera_busy_off();
-        m_tutk_state     = obj->tutk_state;
-
-        if (DevPrinterConfigUtil::get_printer_series_str(obj->printer_type) == "series_o" && BBLNetworkPlugin::instance().use_legacy_network()) {
-            // Legacy plugin cannot support remote play for H2D, force using local mode
-            m_remote_proto = MachineObject::LVR_None;
+    const CameraStreamMode mode = current_mode();
+    if (mode != m_last_mode) {
+        if (m_last_state != MEDIASTATE_IDLE) {
+            m_failed_code = 0; // a mode switch is not a stream failure - don't arm back-off
+            Stop(" ");
        }
-    } else {
-        m_camera_exists = false;
-        m_lan_mode = false;
-        m_lan_proto = MachineObject::LVL_None;
-        m_lan_ip.clear();
-        m_lan_passwd.clear();
-        m_dev_ver.clear();
-        m_tutk_state.clear();
-        m_remote_proto = 0;
-        m_device_busy = false;
+        m_last_mode = mode;
    }
-    Enable(obj && obj->is_info_ready() && obj->m_push_count > 0);
-    if (machine == m_machine) {
-        if (m_last_state == MEDIASTATE_IDLE && IsEnabled())
-            Play();
+    set_active_media_controller(mode);
+
+    const bool uses_local_camera_url = mode == CameraStreamMode::http || mode == CameraStreamMode::https ||
+                                       mode == CameraStreamMode::http_snapshot || mode == CameraStreamMode::rtsp;
+    const bool uses_webrtc = mode == CameraStreamMode::webrtc;
+    const std::string machine = obj ? obj->get_dev_id() : "";
+    bool changed = false;
+
+    if (uses_local_camera_url) {
+        auto agent = wxGetApp().getAgent();
+        std::string url = agent ? agent->get_local_camera_stream_url() : "";
+        m_camera_exists = !url.empty();
+        Enable(obj && m_camera_exists);
+        changed = machine != m_machine || url != m_agent_camera_url;
+        m_agent_camera_url = url;
+        m_url = from_u8(url);
+    } else if (uses_webrtc) {
+        m_camera_exists = obj != nullptr;
+        Enable(obj != nullptr);
+        changed = machine != m_machine;
+        BOOST_LOG_TRIVIAL(info) << "MediaPlayCtrl::SetMachineObject webrtc: changed=" << changed
+                                << " last_state=" << m_last_state << " web_user_stopped=" << m_web_user_stopped;
+        m_url.clear();
+        m_agent_camera_url.clear();
+    } else {
+        if (obj) {
+            m_camera_exists  = obj->has_ipcam;
+            m_dev_ver        = obj->get_ota_version();
+            m_lan_mode       = obj->is_lan_mode_printer();
+            m_lan_proto      = obj->liveview_local;
+            m_remote_proto   = obj->get_liveview_remote();
+            m_lan_ip         = obj->get_dev_ip();
+            m_lan_passwd     = obj->get_access_code();
+            m_device_busy    = obj->is_camera_busy_off();
+            m_tutk_state     = obj->tutk_state;
+
+            if (DevPrinterConfigUtil::get_printer_series_str(obj->printer_type) == "series_o" && BBLNetworkPlugin::instance().use_legacy_network()) {
+                // Legacy plugin cannot support remote play for H2D, force using local mode
+                m_remote_proto = LiveviewRemote::LVR_None;
+            }
+        } else {
+            m_camera_exists = false;
+            m_lan_mode = false;
+            m_lan_proto = LiveviewLocal::LVL_None;
+            m_lan_ip.clear();
+            m_lan_passwd.clear();
+            m_dev_ver.clear();
+            m_tutk_state.clear();
+            m_remote_proto = 0;
+            m_device_busy = false;
+        }
+        Enable(obj && obj->is_info_ready() && obj->m_push_count > 0);
+        if (machine == m_machine)
+            return;
+
+        m_machine = machine;
+        BOOST_LOG_TRIVIAL(info) << "MediaPlayCtrl switch machine: " << m_machine;
+        m_disable_lan = false;
+        m_failed_retry = 0;
+        m_last_failed_codes.clear();
+        m_last_user_play = wxDateTime::Now();
+        std::string stream_url;
+        if (get_stream_url(&stream_url)) {
+            m_streaming = boost::algorithm::contains(stream_url, "device=" + m_machine);
+        } else {
+            m_streaming = false;
+        }
+        if (m_last_state != MEDIASTATE_IDLE)
+            Stop(" ");
+        if (m_next_retry.IsValid()) // Try open 2 seconds later, to avoid state conflict
+            m_next_retry = wxDateTime::Now() + wxTimeSpan::Seconds(2);
+        else
+            SetStatus("", false);
        return;
    }
+
    m_machine = machine;
-    BOOST_LOG_TRIVIAL(info) << "MediaPlayCtrl switch machine: " << m_machine;
-    m_disable_lan = false;
-    m_failed_retry = 0;
-    m_last_failed_codes.clear();
-    m_last_user_play = wxDateTime::Now();
-    std::string stream_url;
-    if (get_stream_url(&stream_url)) {
-        m_streaming = boost::algorithm::contains(stream_url, "device=" + m_machine);
-    } else {
-        m_streaming = false;
+    if (!changed)
+        return;
+
+    // A genuine target switch is not a stream failure and should clear the
+    // manual-stop state before the new target is allowed to play.
+    m_web_user_stopped = false;
+    if (uses_local_camera_url) {
+        m_failed_code = 0;
+        m_failed_retry = 0;
+        m_next_retry = wxDateTime();
    }
    if (m_last_state != MEDIASTATE_IDLE)
        Stop(" ");
-    if (m_next_retry.IsValid()) // Try open 2 seconds later, to avoid state conflict
-        m_next_retry = wxDateTime::Now() + wxTimeSpan::Seconds(2);
-    else
-        SetStatus("", false);
 }

 wxString hide_id_middle_string(wxString const &str, size_t offset = 0, size_t length = -1)
@@ -254,13 +353,71 @@ void refresh_agora_url(char const* device, char const* dev_ver, char const* chan

 void MediaPlayCtrl::Play()
 {
-    if (!m_next_retry.IsValid() || wxDateTime::Now() < m_next_retry)
+    if ((m_next_retry.IsValid() && wxDateTime::Now() < m_next_retry) || !IsShownOnScreen() || m_last_state != MEDIASTATE_IDLE)
        return;
-    if (!IsShownOnScreen())
-        return;
-    if (m_last_state != MEDIASTATE_IDLE) {
+
+    const CameraStreamMode mode = current_mode();
+    set_active_media_controller(mode);
+    m_last_mode = mode;
+    auto agent = wxGetApp().getAgent();
+
+    auto printer_agent = agent ? agent->get_printer_agent() : nullptr;
+    const bool is_bbl = (printer_agent ? printer_agent->get_agent_info().id : "") == BBL_PRINTER_AGENT_ID;
+
+    if (!is_bbl) {
+        const bool is_webrtc = mode == CameraStreamMode::webrtc;
+        const bool is_snapshot = mode == CameraStreamMode::http_snapshot;
+        const bool is_http_stream = mode == CameraStreamMode::http || mode == CameraStreamMode::https || mode == CameraStreamMode::rtsp;
+        if (!is_webrtc && !is_snapshot && !is_http_stream)
+            return;
+
+        auto *webrtc_ctrl = is_webrtc ? dynamic_cast<WebRtcMediaController *>(m_active_media_controller) : nullptr;
+        if (is_webrtc && (!webrtc_ctrl || !m_media_ctrl)) {
+            Stop(_L("Please confirm if the printer is connected."));
+            return;
+        }
+        if (webrtc_ctrl && webrtc_ctrl->is_active())
+            return;
+
+        m_failed_code = 0;
+        if (!m_active_media_controller || m_machine.empty() || !IsEnabled() || !m_camera_exists ||
+            (!is_webrtc && m_url.IsEmpty())) {
+            Stop(_L("Please confirm if the printer is connected."));
+            return;
+        }
+
+        if (is_webrtc) {
+            BOOST_LOG_TRIVIAL(info) << "MediaPlayCtrl::Play webrtc: last_state=" << m_last_state << " failed_retry=" << m_failed_retry
+                                    << " shown=" << IsShownOnScreen();
+            auto channel = agent ? agent->create_camera_signaling_channel(m_machine, wxGetApp().get_printer_cloud_provider()) : nullptr;
+            if (!channel) {
+                Stop(_L("Sign in to OrcaCloud to view the camera."));
+                return;
+            }
+            webrtc_ctrl->set_signalling_channel(std::move(channel));
+            m_media_ctrl->BeginExternalStream();
+            m_last_state = MEDIASTATE_INITIALIZING;
+            SetStatus(_L("Initializing..."), false);
+        } else if (is_snapshot) {
+            m_last_state = wxMEDIASTATE_PLAYING;
+            SetStatus(_L("Playing..."), false);
+        }
+
+        m_button_play->SetIcon("media_stop");
+        if (m_active_media_controller == m_media_ctrl) {
+            // wxMediaCtrl3 reports when it has a decoded frame; load() waits for
+            // that event before queuing Play so the stream is not marked stopped.
+            load();
+        } else {
+            m_active_media_controller->Load(wxURI(m_url));
+            m_active_media_controller->Play();
+        }
+        if (webrtc_ctrl) {
+            m_webrtc_epoch = webrtc_ctrl->epoch();
+        }
        return;
    }
+
    m_failed_code = 0;
    if (m_machine.empty()) {
        Stop(_L("Please confirm if the printer is connected."));
@@ -281,16 +438,15 @@ void MediaPlayCtrl::Play()
    }

    BOOST_LOG_TRIVIAL(info) << "MediaPlayCtrl::Play: " << m_lan_proto << m_remote_proto << m_disable_lan;
-    NetworkAgent *agent = wxGetApp().getAgent();
    std::string  agent_version = agent ? agent->get_version() : "";
-    if (m_lan_proto > MachineObject::LVL_Disable && (m_lan_mode || !m_remote_proto) && !m_disable_lan && !m_lan_ip.empty()) {
+    if (m_lan_proto > LiveviewLocal::LVL_Disable && (m_lan_mode || !m_remote_proto) && !m_disable_lan && !m_lan_ip.empty()) {
        m_disable_lan = m_remote_proto && !m_lan_mode; // try remote next time
        std::string url;
-        if (m_lan_proto == MachineObject::LVL_Local)
+        if (m_lan_proto == LiveviewLocal::LVL_Local)
            url = "bambu:///local/" + m_lan_ip + ".?port=6000&user=" + m_lan_user + "&passwd=" + m_lan_passwd;
-        else if (m_lan_proto == MachineObject::LVL_Rtsps)
+        else if (m_lan_proto == LiveviewLocal::LVL_Rtsps)
            url = "bambu:///rtsps___" + m_lan_user + ":" + m_lan_passwd + "@" + m_lan_ip + "/streaming/live/1?proto=rtsps";
-        else if (m_lan_proto == MachineObject::LVL_Rtsp)
+        else if (m_lan_proto == LiveviewLocal::LVL_Rtsp)
            url = "bambu:///rtsp___" + m_lan_user + ":" + m_lan_passwd + "@" + m_lan_ip + "/streaming/live/1?proto=rtsp";
        url += "&device=" + m_machine;
        url += "&net_ver=" + agent_version;
@@ -312,8 +468,8 @@ void MediaPlayCtrl::Play()
    // !m_lan_mode && !m_remote_proto && m_lan_proto == LVL_Disable (*)
    // !m_lan_mode && !m_remote_proto && m_lan_proto == LVL_None (x)

-    if (m_lan_proto <= MachineObject::LVL_Disable && (m_lan_mode || !m_remote_proto)) {
-        Stop(m_lan_proto == MachineObject::LVL_None
+    if (m_lan_proto <= LiveviewLocal::LVL_Disable && (m_lan_mode || !m_remote_proto)) {
+        Stop(m_lan_proto == LiveviewLocal::LVL_None
            ? _L("A problem occurred. Please update the printer firmware and try again.")
            : _L("LAN Only Liveview is off. Please turn on the liveview on printer screen."));
        return;
@@ -381,15 +537,78 @@ void MediaPlayCtrl::Play()

 void start_ping_test();

+void MediaPlayCtrl::StopWebStream()
+{
+    if (m_last_state == MEDIASTATE_IDLE)
+        return;
+    if (m_active_media_controller && m_active_media_controller == m_web_ctrl)
+        m_active_media_controller->Stop();
+    m_button_play->SetIcon("media_play");
+    m_last_state = MEDIASTATE_IDLE;
+    SetStatus(_L("Video Stopped."), false);
+}
+
 void MediaPlayCtrl::Stop(wxString const &msg, wxString const &msg2)
 {
+    const bool webrtc_active = m_last_mode == CameraStreamMode::webrtc &&
+                               dynamic_cast<WebRtcMediaController *>(m_active_media_controller) != nullptr;
+    BOOST_LOG_TRIVIAL(info) << "MediaPlayCtrl::Stop: last_state=" << m_last_state
+                            << " webrtc_active=" << webrtc_active << " failed_code=" << m_failed_code
+                            << " msg='" << msg.ToUTF8().data() << "'";
+    if (webrtc_active) {
+        m_active_media_controller->Stop();
+        m_media_ctrl->EndExternalStream();
+    }
+    switch (m_last_mode) {
+    case CameraStreamMode::http:
+    case CameraStreamMode::https:
+    case CameraStreamMode::http_snapshot: {
+        const bool snapshot = m_last_mode == CameraStreamMode::http_snapshot;
+        if (m_last_state != MEDIASTATE_IDLE) {
+            if (snapshot) {
+                if (m_active_media_controller)
+                    m_active_media_controller->Stop();
+            } else {
+                // http/https mode plays through the ffmpeg backend (m_media_ctrl), not
+                // the webview - tear its read thread down too, otherwise it keeps
+                // pulling and painting frames after the UI says "Video Stopped".
+                boost::unique_lock lock(m_mutex);
+                m_tasks.push_back({"<stop>", m_active_media_controller});
+                m_cond.notify_all();
+            }
+            m_button_play->SetIcon("media_play");
+            m_last_state = MEDIASTATE_IDLE;
+            if (!msg.IsEmpty())
+                SetStatus(msg);
+            else
+                SetStatus(_L("Video Stopped."), false);
+            // Keep retries bounded for an explicit or retry-driven playback attempt.
+            // m_failed_retry is cleared on success (onStateChanged) and on a deliberate
+            // machine switch (SetMachineObject); manual playback via TogglePlay resets it.
+            if (m_failed_code != 0) {
+                const bool auto_retry = wxGetApp().app_config->get("liveview", "auto_retry") != "false";
+                ++m_failed_retry;
+                m_next_retry = auto_retry
+                    ? wxDateTime::Now() + wxTimeSpan::Seconds(std::min(5 * m_failed_retry, 30))
+                    : wxDateTime::Now() + wxTimeSpan::Days(1); // "off": wait for a manual retry
+            }
+        } else if (!msg.IsEmpty()) {
+            SetStatus(msg, false);
+        }
+        return;
+    }
+    default:
+        break;
+    }
+
    int last_state = m_last_state;

    if (m_last_state != MEDIASTATE_IDLE) {
        m_media_ctrl->InvalidateBestSize();
        m_button_play->SetIcon("media_play");
        boost::unique_lock lock(m_mutex);
-        m_tasks.push_back("<stop>");
+        if (!webrtc_active)
+            m_tasks.push_back({"<stop>", m_active_media_controller});
        m_cond.notify_all();
        if (!msg.IsEmpty())
            SetStatus(msg);
@@ -454,15 +673,38 @@ void MediaPlayCtrl::Stop(wxString const &msg, wxString const &msg2)
        m_next_retry = wxDateTime::Now() + wxTimeSpan::Seconds(5 * m_failed_retry);
 }

+void MediaPlayCtrl::on_webrtc_status(WebRtcMediaController::Status status)
+{
+    // Drop CallAfter-queued events from a superseded Play attempt.
+    if (status.epoch != m_webrtc_epoch)
+        return;
+    if (status.kind == WebRtcMediaController::Status::Connecting) {
+        m_last_state = MEDIASTATE_INITIALIZING;
+        SetStatus(_L("Initializing..."), false);
+    } else if (status.kind == WebRtcMediaController::Status::Playing) {
+        m_last_state = wxMEDIASTATE_PLAYING;
+        m_failed_code = 0;
+        m_failed_retry = 0;
+        SetStatus(_L("Playing..."), false);
+    } else if (status.kind == WebRtcMediaController::Status::Failed) {
+        m_failed_code = static_cast<int>(status.code) + 1;
+        Stop();
+    }
+    // Status::Stopped needs no action: a genuine failure arrives as Failed, and
+    // a stop we initiated is already handled by Stop() itself.
+}
+
 void MediaPlayCtrl::TogglePlay()
 {
    BOOST_LOG_TRIVIAL(info) << "MediaPlayCtrl::TogglePlay";
    if (m_last_state != MEDIASTATE_IDLE) {
        m_next_retry = wxDateTime();
+        m_web_user_stopped = true;
        Stop();
    } else {
        m_failed_retry = 0;
        m_user_triggered = true;
+        m_web_user_stopped = false;
        if (m_last_user_play + wxTimeSpan::Minutes(5) < wxDateTime::Now()) {
            m_last_failed_codes.clear();
            m_last_user_play = wxDateTime::Now();
@@ -528,13 +770,13 @@ void MediaPlayCtrl::ToggleStream()
            wxGetApp().app_config->set("not_show_vcamera_stop_prev", "1");
        if (res == wxID_CANCEL) return;
    }
-    if (m_lan_proto > MachineObject::LVL_Disable && (m_lan_mode || !m_remote_proto) && !m_disable_lan && !m_lan_ip.empty()) {
+    if (m_lan_proto > LiveviewLocal::LVL_Disable && (m_lan_mode || !m_remote_proto) && !m_disable_lan && !m_lan_ip.empty()) {
        std::string url;
-        if (m_lan_proto == MachineObject::LVL_Local)
+        if (m_lan_proto == LiveviewLocal::LVL_Local)
            url = "bambu:///local/" + m_lan_ip + ".?port=6000&user=" + m_lan_user + "&passwd=" + m_lan_passwd;
-        else if (m_lan_proto == MachineObject::LVL_Rtsps)
+        else if (m_lan_proto == LiveviewLocal::LVL_Rtsps)
            url = "bambu:///rtsps___" + m_lan_user + ":" + m_lan_passwd + "@" + m_lan_ip + "/streaming/live/1?proto=rtsps";
-        else if (m_lan_proto == MachineObject::LVL_Rtsp)
+        else if (m_lan_proto == LiveviewLocal::LVL_Rtsp)
            url = "bambu:///rtsp___" + m_lan_user + ":" + m_lan_passwd + "@" + m_lan_ip + "/streaming/live/1?proto=rtsp";
        url += "&device=" + into_u8(m_machine);
        url += "&dev_ver=" + m_dev_ver;
@@ -594,7 +836,9 @@ void MediaPlayCtrl::jump_to_play()
 void MediaPlayCtrl::onStateChanged(wxMediaEvent &event)
 {
    auto last_state = m_last_state;
-    auto state      = m_media_ctrl->GetState();
+    if (m_active_media_controller != m_media_ctrl)
+        return;
+    auto state      = m_active_media_controller->GetState();
    BOOST_LOG_TRIVIAL(info) << "MediaPlayCtrl::onStateChanged: " << state << ", last_state: " << last_state;
    if ((int) state < 0) return;
    {
@@ -606,14 +850,14 @@ void MediaPlayCtrl::onStateChanged(wxMediaEvent &event)
    }
    if ((last_state == MEDIASTATE_IDLE || last_state == MEDIASTATE_INITIALIZING) && state == wxMEDIASTATE_STOPPED) { return; }
    if ((last_state == wxMEDIASTATE_PAUSED || last_state == wxMEDIASTATE_PLAYING) && state == wxMEDIASTATE_STOPPED) {
-        m_failed_code = m_media_ctrl->GetLastError();
+        m_failed_code = m_active_media_controller->GetLastError();
        Stop();
        return;
    }
    if (last_state == MEDIASTATE_LOADING && (state == wxMEDIASTATE_STOPPED || state == wxMEDIASTATE_PAUSED)) {
-        wxSize size = m_media_ctrl->GetVideoSize();
+        wxSize size = m_active_media_controller->GetVideoSize();
        BOOST_LOG_TRIVIAL(info) << "MediaPlayCtrl::onStateChanged: size: " << size.x << "x" << size.y;
-        m_failed_code = m_media_ctrl->GetLastError();
+        m_failed_code = m_active_media_controller->GetLastError();
        if (size.GetWidth() >= 320) {
            m_last_state = state;
            m_failed_code = 0;
@@ -623,7 +867,7 @@ void MediaPlayCtrl::onStateChanged(wxMediaEvent &event)
            m_failed_retry = 0;
            m_disable_lan = false;
            boost::unique_lock lock(m_mutex);
-            m_tasks.push_back("<play>");
+            m_tasks.push_back({"<play>", m_active_media_controller});
            m_cond.notify_all();
        } else if (event.GetId()) {
            if (m_failed_code == 0)
@@ -666,7 +910,8 @@ void MediaPlayCtrl::load()
 {
    m_last_state = MEDIASTATE_LOADING;
    SetStatus(_L("Loading..."));
-    if (wxGetApp().app_config->get("internal_developer_mode") == "true") {
+    const auto mode = current_mode();
+    if (mode == CameraStreamMode::none && wxGetApp().app_config->get("internal_developer_mode") == "true") {
        std::string file_h264 = data_dir() + "/video.h264";
        std::string file_info = data_dir() + "/video.info";
        BOOST_LOG_TRIVIAL(info) << "MediaPlayCtrl dump video to " << file_h264;
@@ -677,7 +922,7 @@ void MediaPlayCtrl::load()
        m_url                = m_url + "&dump_info=" + boost::lexical_cast<std::string>(dump_info_file);
    }
    boost::unique_lock lock(m_mutex);
-    m_tasks.push_back(m_url);
+    m_tasks.push_back({m_url, m_active_media_controller});
    m_cond.notify_all();
 }

@@ -686,9 +931,8 @@ void MediaPlayCtrl::on_show_hide(wxShowEvent &evt)
    evt.Skip();
    if (m_isBeingDeleted) return;
    m_failed_retry = 0;
-    if (m_next_retry.IsValid()) // Try open 2 seconds later, to avoid quick play/stop
-        m_next_retry = wxDateTime::Now() + wxTimeSpan::Seconds(2);
-    IsShownOnScreen() ? Play() : Stop();
+    if (!IsShownOnScreen())
+        Stop();
 }

 void MediaPlayCtrl::media_proc()
@@ -698,30 +942,34 @@ void MediaPlayCtrl::media_proc()
        while (m_tasks.empty()) {
            m_cond.wait(lock);
        }
-        wxString url = m_tasks.front();
-        if (m_tasks.size() >= 2 && !url.IsEmpty() && url[0] != '<' && m_tasks[1] == "<stop>") {
-            BOOST_LOG_TRIVIAL(trace) << "MediaPlayCtrl: busy skip url: " << url;
+        MediaTask task = m_tasks.front();
+        if (m_tasks.size() >= 2 && !task.command.IsEmpty() && task.command[0] != '<' &&
+            m_tasks[1].command == "<stop>" && task.controller == m_tasks[1].controller) {
+            BOOST_LOG_TRIVIAL(trace) << "MediaPlayCtrl: busy skip url: " << task.command;
            m_tasks.pop_front();
            m_tasks.pop_front();
            continue;
        }
        lock.unlock();
-        if (url == "<stop>") {
+        if (task.command == "<stop>") {
            BOOST_LOG_TRIVIAL(info) <<  "MediaPlayCtrl: start stop";
-            m_media_ctrl->Stop();
+            if (task.controller)
+                task.controller->Stop();
            BOOST_LOG_TRIVIAL(info) << "MediaPlayCtrl: end stop";
        }
-        else if (url == "<exit>") {
+        else if (task.command == "<exit>") {
            break;
        }
-        else if (url == "<play>") {
+        else if (task.command == "<play>") {
            BOOST_LOG_TRIVIAL(info) <<  "MediaPlayCtrl: start play";
-            m_media_ctrl->Play();
+            if (task.controller)
+                task.controller->Play();
            BOOST_LOG_TRIVIAL(info) << "MediaPlayCtrl: end play";
        }
        else {
            BOOST_LOG_TRIVIAL(info) <<  "MediaPlayCtrl: start load";
-            m_media_ctrl->Load(wxURI(url));
+            if (task.controller)
+                task.controller->Load(wxURI(task.command));
            BOOST_LOG_TRIVIAL(info) << "MediaPlayCtrl: end load";
        }
        lock.lock();
@@ -9,6 +9,9 @@
 #define MediaPlayCtrl_h

 #include "wxMediaCtrl3.h"
+#include "IMediaController.hpp"
+#include "WebRtcMediaController.hpp"
+#include "slic3r/Utils/IPrinterAgent.hpp"

 #include <wx/panel.h>

@@ -36,6 +39,10 @@ public:

    void SetMachineObject(MachineObject * obj);

+    void SetWebMediaController(IMediaController *ctrl);
+
+    void StopWebStream();
+
    bool IsStreaming() const;

    void ToggleStream();
@@ -54,6 +61,7 @@ protected:
    void TogglePlay();

    void SetStatus(wxString const &msg, bool hyperlink = true);
+    void on_webrtc_status(WebRtcMediaController::Status status);

 private:
    void load();
@@ -66,6 +74,9 @@ private:

    static bool get_stream_url(std::string *url = nullptr);

+    CameraStreamMode current_mode() const;
+    void set_active_media_controller(CameraStreamMode mode);
+
 private:
    static inline const wxMediaState MEDIASTATE_IDLE = static_cast<wxMediaState>(3);
    static inline const wxMediaState MEDIASTATE_INITIALIZING = static_cast<wxMediaState>(4);
@@ -76,6 +87,13 @@ private:
    std::shared_ptr<int> m_token = std::make_shared<int>(0);

    wxMediaCtrl3 * m_media_ctrl;
+    IMediaController * m_active_media_controller = nullptr;
+    IMediaController * m_web_ctrl = nullptr;
+    std::unique_ptr<WebRtcMediaController> m_webrtc_ctrl;
+    CameraStreamMode m_last_mode = CameraStreamMode::none;
+    std::uint64_t m_webrtc_epoch = 0;
+    std::string m_agent_camera_url;
+    bool m_web_user_stopped = false;
    wxMediaState m_last_state = MEDIASTATE_IDLE;
    std::string m_machine;
    int m_lan_proto = 0;
@@ -91,7 +109,11 @@ private:
    bool m_disable_lan = false;
    wxString m_url;

-    std::deque<wxString> m_tasks;
+    struct MediaTask {
+        wxString command;
+        IMediaController *controller = nullptr;
+    };
+    std::deque<MediaTask> m_tasks;
    boost::mutex m_mutex;
    boost::condition_variable m_cond;
    boost::thread m_thread;
@@ -34,6 +34,8 @@

 #include "DeviceCore/DevManager.h"

+#include <boost/log/trivial.hpp>
+
 namespace Slic3r {
 namespace GUI {

@@ -259,6 +261,7 @@ void MonitorPanel::msw_rescale()

 void MonitorPanel::select_machine(std::string machine_sn)
 {
+    BOOST_LOG_TRIVIAL(info) << "Orca diagnostic: MonitorPanel::select_machine queueing machine_sn=" << machine_sn;
    wxCommandEvent *event = new wxCommandEvent(wxEVT_COMMAND_CHOICE_SELECTED);
    event->SetString(machine_sn);
    wxQueueEvent(this, event);
@@ -276,13 +279,20 @@ void MonitorPanel::on_timer(wxTimerEvent& event)
 void MonitorPanel::on_select_printer(wxCommandEvent& event)
 {
    Slic3r::DeviceManager* dev = Slic3r::GUI::wxGetApp().getDeviceManager();
+    const std::string requested_dev_id = event.GetString().ToStdString();
+    BOOST_LOG_TRIVIAL(info) << "Orca diagnostic: MonitorPanel::on_select_printer requested_dev_id="
+                            << requested_dev_id << " device_manager=" << (dev ? "set" : "null");
    if (!dev) return;

    if ( dev->get_selected_machine() && (dev->get_selected_machine()->get_dev_id() != event.GetString().ToStdString()) && m_hms_panel) {
        m_hms_panel->clear_hms_tag();
    }

-    if (!dev->set_selected_machine(event.GetString().ToStdString()))
+    const bool selected = dev->set_selected_machine(requested_dev_id);
+    BOOST_LOG_TRIVIAL(info) << "Orca diagnostic: MonitorPanel::on_select_printer set_selected_machine result="
+                            << selected << " selected_dev_id="
+                            << (dev->get_selected_machine() ? dev->get_selected_machine()->get_dev_id() : "<null>");
+    if (!selected)
        return;

    set_default();
@@ -3,6 +3,7 @@

 #include "GUI_App.hpp"
 #include "MainFrame.hpp"
+#include "DeviceCore/DevConfigUtil.h"

 namespace Slic3r {
 namespace GUI {
@@ -108,21 +109,12 @@ bool DeviceItem::is_blocking_printing(MachineObject* obj_)
 {
    DeviceManager* dev = Slic3r::GUI::wxGetApp().getDeviceManager();
    if (!dev) return true;
-    auto target_model = obj_->printer_type;
    std::string source_model = "";

    PresetBundle* preset_bundle = wxGetApp().preset_bundle;
    source_model = preset_bundle->printers.get_edited_preset().get_printer_type(preset_bundle);

-    if (source_model != target_model) {
-        std::vector<std::string> compatible_machine = obj_->get_compatible_machine();
-        vector<std::string>::iterator it = find(compatible_machine.begin(), compatible_machine.end(), source_model);
-        if (it == compatible_machine.end()) {
-            return true;
-        }
-    }
-
-    return false;
+    return !DevPrinterConfigUtil::is_printer_model_compatible(source_model, *obj_);
 }

 void DeviceItem::update_item(const DeviceItem* item)
@@ -159,4 +159,4 @@ private:
    void OnApplyDialog(wxCommandEvent &event);
 };

-}} // namespace Slic3r::GUI
+}} // namespace Slic3r::GUI
@@ -87,6 +87,7 @@
 #ifdef __WXGTK__
 #include "LinuxDisplayBackend.hpp"
 #endif
+#include "AuiPaneLayout.hpp"
 #include "GUI_Utils.hpp"
 #include "GUI_Factories.hpp"
 #include "wxExtensions.hpp"
@@ -2025,12 +2026,14 @@ bool Sidebar::priv::sync_extruder_list(bool &only_external_material, bool is_man
    std::string machine_print_name = obj->get_show_printer_type();
    PresetBundle *preset_bundle = wxGetApp().preset_bundle;
    std::string target_model_id  = preset_bundle->printers.get_selected_preset().get_printer_type(preset_bundle);
-    Preset* machine_preset = get_printer_preset(obj);
-    if (!machine_preset) {
+    const bool optional_printer_model = DevPrinterConfigUtil::is_optional_printer_model_id(obj->printer_type);
+    const bool optional_target_model  = DevPrinterConfigUtil::is_optional_printer_model_id(target_model_id);
+    Preset* machine_preset = optional_printer_model ? nullptr : get_printer_preset(obj);
+    if (!optional_printer_model && !optional_target_model && !machine_preset) {
        BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << __LINE__ << "check error: machine_preset empty";
        return false;
    }
-    if (machine_print_name != target_model_id) {
+    if (!optional_printer_model && !optional_target_model && machine_print_name != target_model_id) {
        MessageDialog dlg(this->plater, _L("The currently selected machine preset is inconsistent with the connected printer type.\n"
                                            "Are you sure to continue syncing?"), _L("Sync printer information"), wxICON_WARNING | wxYES | wxNO);
        if (dlg.ShowModal() == wxID_NO) {
@@ -2222,6 +2225,11 @@ void Sidebar::priv::update_sync_status(const MachineObject *obj)
        return;
    }

+    if (DevPrinterConfigUtil::is_optional_printer_model_id(obj->printer_type)) {
+        clear_all_sync_status();
+        return;
+    }
+
    bool printer_synced = false;
    // 1. update printer status
    const Preset &cur_preset = wxGetApp().preset_bundle->printers.get_edited_preset();
@@ -5822,11 +5830,30 @@ void Sidebar::load_ams_list(MachineObject* obj)
        filament_ams_list = build_filament_ams_list(obj);
    }

-    bool device_change     = false;
    const std::string& device = obj ? obj->get_dev_id() : "";
-    if (p->ams_list_device != device) {
+    const bool same_device = p->ams_list_device == device;
+
+    // Keep sync metadata out of the device payload, but preserve it across a
+    // subscription refresh when the physical filament in a slot is unchanged.
+    // Otherwise the refreshed configs differ only by the missing
+    // filament_changed key, causing combo boxes to rebuild and lose their
+    // transient post-sync badges.
+    auto &previous_filament_ams_list = wxGetApp().preset_bundle->filament_ams_list;
+    for (auto &entry : filament_ams_list) {
+        auto previous = previous_filament_ams_list.find(entry.first);
+        const auto *previous_changed = previous == previous_filament_ams_list.end() ? nullptr :
+                                       dynamic_cast<const ConfigOptionBool *>(previous->second.option("filament_changed"));
+        if (!same_device || previous_changed == nullptr ||
+            previous->second.opt_string("filament_id", 0u) != entry.second.opt_string("filament_id", 0u)) {
+            continue;
+        }
+        entry.second.set_key_value("filament_changed",
+                                   new ConfigOptionBool{previous_changed->value});
+    }
+
+    bool device_change     = !same_device;
+    if (device_change) {
        p->ams_list_device = device;
-        device_change      = true;
    }
    BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << boost::format(": %1% items") % filament_ams_list.size();
    if (wxGetApp().preset_bundle->filament_ams_list == filament_ams_list && !device_change)
@@ -5836,9 +5863,27 @@ void Sidebar::load_ams_list(MachineObject* obj)
    wxGetApp().preset_bundle->filament_ams_list = filament_ams_list;

    for (auto c : p->combos_filament){
+        c->set_sync_badge(false);
        c->update();
-        if (device_change) {
-            c->ShowBadge(false);//change printer,then clear badge
+    }
+
+    if (!device_change) {
+        size_t combo_index = 0;
+        for (const auto &entry : filament_ams_list) {
+            const auto &tray = entry.second;
+            const bool has_filament = !tray.opt_string("filament_id", 0u).empty();
+            const bool is_placeholder = tray.has("filament_slot_placeholder") &&
+                                         tray.opt_bool("filament_slot_placeholder", 0u);
+            if (!has_filament && !is_placeholder) {
+                continue;
+            }
+            if (combo_index >= p->combos_filament.size()) {
+                break;
+            }
+            const auto *filament_changed = dynamic_cast<const ConfigOptionBool *>(tray.option("filament_changed"));
+            p->combos_filament[combo_index]->set_sync_badge(
+                has_filament && !is_placeholder && filament_changed != nullptr && filament_changed->value);
+            ++combo_index;
        }
    }

@@ -6012,18 +6057,32 @@ void Sidebar::sync_ams_list(bool is_from_big_sync_btn)
        auto tip     = sync_color_only ? _L("Only filament color information has been synchronized from printer.") :
                                         _L("Filament type and color information have been synchronized, but slot information is not included.");
        c->SetToolTip(tip);
-        c->ShowBadge(true);
+        c->set_sync_badge(true);
    };
    { // badge ams filament
        clear_combos_filament_badge();
        if (sync_result.direct_sync) {
-            // Orca: PresetBundle::sync_ams_list rebuilds combos_filament
-            // 1:1 from the AMS trays that produce a combo (loaded trays + placeholders; non-placeholder
-            // empty trays are skipped), so every resulting combo is AMS-sourced and gets a badge. The
-            // previous per-tray index walked the full filament_ams_list (including the skipped empties),
-            // so an empty slot before a loaded one dropped the badge for the trailing filaments.
-            for (auto &c : p->combos_filament) {
-                badge_combox_filament(c);
+            // A placeholder contributes a preserved project filament to the
+            // overwrite result, but it is not AMS-sourced and must not get a
+            // sync badge. Non-placeholder empty trays are omitted entirely.
+            size_t combo_index = 0;
+            for (const auto &entry : wxGetApp().preset_bundle->filament_ams_list) {
+                const auto &tray = entry.second;
+                const bool has_filament = !tray.opt_string("filament_id", 0u).empty();
+                const bool is_placeholder = tray.has("filament_slot_placeholder") &&
+                                             tray.opt_bool("filament_slot_placeholder", 0u);
+                if (!has_filament && !is_placeholder) {
+                    continue;
+                }
+                if (combo_index >= p->combos_filament.size()) {
+                    break;
+                }
+                if (is_placeholder) {
+                    p->combos_filament[combo_index]->set_sync_badge(false);
+                } else {
+                    badge_combox_filament(p->combos_filament[combo_index]);
+                }
+                ++combo_index;
            }
        }
    }
@@ -6291,6 +6350,11 @@ template<typename T> void setup_dialog_position(T& info)

 void Sidebar::pop_sync_nozzle_and_ams_dialog() {
    BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << " begin pop_sync_nozzle_and_ams_dialog";
+    auto agent = wxGetApp().getAgent();
+    if (!agent || agent->get_filament_sync_mode() == FilamentSyncMode::none) {
+        BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << " filament synchronization is not supported; skipping dialog";
+        return;
+    }
    wxTheApp->CallAfter([this]() {
        SyncNozzleAndAmsDialog::InputInfo temp_na_info;
        wxPoint                           big_btn_pt;
@@ -6422,17 +6486,14 @@ void Sidebar::clear_combos_filament_badge()
 {
    auto &combos_filament = p->combos_filament;
    for (auto &c : combos_filament) { // clear flag
-        c->ShowBadge(false);
+        c->set_sync_badge(false);
    }
 }

 void Sidebar::udpate_combos_filament_badge() {
    auto &combos_filament = p->combos_filament;
    for (auto &c : combos_filament) {
-        auto selection   = c->GetSelection();
-        auto select_flag = c->GetFlag(selection);
-        auto ok          = select_flag == (int) PresetComboBox::FilamentAMSType::FROM_AMS;
-        c->ShowBadge(ok);
+        c->update_badge_according_flag();
    }

 }
@@ -6748,6 +6809,14 @@ struct Plater::priv

    // GUI elements
    AuiMgr m_aui_mgr;
+    // Live dock panes. `on_close` runs when the user closes one from its close button; `shown` is
+    // what the owner asked for.
+    struct DockPane
+    {
+        std::function<void()> on_close;
+        bool                  shown{true};
+    };
+    std::map<wxWindow*, DockPane> m_dock_panes;
    wxString m_default_window_layout;
    wxPanel* current_panel{ nullptr };
    std::vector<wxPanel*> panels;
@@ -6920,6 +6989,11 @@ struct Plater::priv
    void update_sidebar(bool force_update = false);
    void reset_window_layout();
    Sidebar::DockingState get_sidebar_docking_state();
+    void add_dock_pane(wxWindow* window, const std::string& name, const wxString& caption, const std::string& dock,
+                       const wxSize& size, std::function<void()> on_close);
+    void remove_dock_pane(wxWindow* window);
+    void show_dock_pane(wxWindow* window, bool show);
+    bool dock_pane_visible(const DockPane& dock_pane, const wxAuiPaneInfo& pane) const;

    bool is_view3D_layers_editing_enabled() const { return (current_panel == view3D) && view3D->get_canvas3d()->is_layers_editing_enabled(); }

@@ -7500,6 +7574,18 @@ Plater::priv::priv(Plater *q, MainFrame *main_frame)
    panel_3d->SetSizer(panel_sizer);
    m_aui_mgr.AddPane(panel_3d, wxAuiPaneInfo().Name("main").CenterPane().PaneBorder(false));

+    q->Bind(wxEVT_AUI_PANE_CLOSE, [this](wxAuiManagerEvent& evt) {
+        const wxAuiPaneInfo* pane = evt.GetPane();
+        auto                 it   = pane != nullptr ? m_dock_panes.find(pane->window) : m_dock_panes.end();
+        if (it != m_dock_panes.end()) {
+            const std::function<void()> on_close = std::move(it->second.on_close);
+            m_dock_panes.erase(it);
+            if (on_close)
+                on_close();
+        }
+        evt.Skip();
+    });
+
    m_default_window_layout = m_aui_mgr.SavePerspective();

    {
@@ -8165,6 +8251,14 @@ void Plater::priv::update_sidebar(bool force_update) {
        }
    }

+    for (const auto& [window, dock_pane] : m_dock_panes) {
+        wxAuiPaneInfo& pane = m_aui_mgr.GetPane(window);
+        if (pane.IsOk() && pane.IsShown() != dock_pane_visible(dock_pane, pane)) {
+            pane.Show(!pane.IsShown());
+            needs_update = true;
+        }
+    }
+
    if (needs_update) {
        notification_manager->set_sidebar_collapsed(sidebar.IsShown());
        m_aui_mgr.Update();
@@ -8174,10 +8268,96 @@ void Plater::priv::update_sidebar(bool force_update) {
 void Plater::priv::reset_window_layout()
 {
    m_aui_mgr.LoadPerspective(m_default_window_layout, false);
+    // Loading a layout docks and hides every pane it does not list, and the default layout lists no
+    // dock panes: a floating dock pane is docked again, like the rest of the window.
+    for (const auto& [window, dock_pane] : m_dock_panes)
+        if (wxAuiPaneInfo& pane = m_aui_mgr.GetPane(window); pane.IsOk())
+            pane.Show(dock_pane_visible(dock_pane, pane));
    sidebar_layout.is_collapsed = false;
    update_sidebar(true);
 }

+bool Plater::priv::dock_pane_visible(const DockPane& dock_pane, const wxAuiPaneInfo& pane) const
+{
+    // A floating pane is a top-level window, so it does not hide with the Plater on other tabs.
+    return dock_pane.shown && (!pane.IsFloating() || sidebar_layout.show);
+}
+
+void Plater::priv::add_dock_pane(wxWindow* window, const std::string& name, const wxString& caption, const std::string& dock,
+                                 const wxSize& size, std::function<void()> on_close)
+{
+    const wxString base_name   = wxString::FromUTF8(name);
+    wxString       unique_name = base_name;
+    for (int i = 2; m_aui_mgr.GetPane(unique_name).IsOk(); ++i)
+        unique_name = base_name + wxString::Format("#%d", i);
+
+    // A restored layout below already holds pixels.
+    const wxSize  pixels = q->FromDIP(size);
+    wxAuiPaneInfo info;
+    info.Name(unique_name).Caption(caption).BestSize(pixels).FloatingSize(pixels).DestroyOnClose(true);
+    if (dock == "left")
+        info.Left();
+    else if (dock == "bottom")
+        info.Bottom();
+    else
+        info.Right();
+    if (dock == "float")
+        info.Float();
+
+    // Put the pane back where it was the last time the window layout was saved with it open.
+    const std::string saved = aui_pane_layout_entry(wxGetApp().app_config->get("window_layout"), unique_name.utf8_string());
+    if (!saved.empty()) {
+        m_aui_mgr.LoadPaneInfo(wxString::FromUTF8(saved), info);
+        info.Caption(caption).DestroyOnClose(true).Show();
+    }
+
+    // Floating is disabled on Wayland.
+    if ((m_aui_mgr.GetFlags() & wxAUI_MGR_ALLOW_FLOATING) == 0) {
+        info.Dock().Floatable(false);
+        if (info.dock_direction == wxAUI_DOCK_NONE)
+            info.Right();
+    }
+
+    const DockPane& dock_pane = m_dock_panes[window] = DockPane{std::move(on_close)};
+    info.Show(dock_pane_visible(dock_pane, info));
+    m_aui_mgr.AddPane(window, info);
+
+    // wxAUI does not record a dragged sash in best_size, so track the docked size like the sidebar
+    // does, for the saved layout.
+    window->Bind(wxEVT_IDLE, [this, window](wxIdleEvent& evt) {
+        wxAuiPaneInfo& pane = m_aui_mgr.GetPane(window);
+        if (pane.IsOk() && pane.IsShown() && pane.IsDocked() && pane.rect.GetWidth() > 0 && pane.rect.GetHeight() > 0) {
+            const bool horizontal = pane.dock_direction == wxAUI_DOCK_TOP || pane.dock_direction == wxAUI_DOCK_BOTTOM;
+            pane.BestSize(horizontal ? pane.best_size.GetWidth() : pane.rect.GetWidth(),
+                          horizontal ? pane.rect.GetHeight() : pane.best_size.GetHeight());
+        }
+        evt.Skip();
+    });
+
+    m_aui_mgr.Update();
+}
+
+void Plater::priv::remove_dock_pane(wxWindow* window)
+{
+    m_dock_panes.erase(window);
+    if (m_aui_mgr.DetachPane(window))
+        m_aui_mgr.Update();
+    window->Destroy();
+}
+
+void Plater::priv::show_dock_pane(wxWindow* window, bool show)
+{
+    const auto     it   = m_dock_panes.find(window);
+    wxAuiPaneInfo& pane = m_aui_mgr.GetPane(window);
+    if (it == m_dock_panes.end() || !pane.IsOk())
+        return;
+    it->second.shown = show;
+    if (pane.IsShown() == dock_pane_visible(it->second, pane))
+        return;
+    pane.Show(!pane.IsShown());
+    m_aui_mgr.Update();
+}
+
 Sidebar::DockingState Plater::priv::get_sidebar_docking_state() {
    if (!sidebar_layout.is_enabled) {
        return Sidebar::None;
@@ -12271,7 +12451,7 @@ void Plater::priv::on_select_preset(wxCommandEvent &evt)
            sidebar->auto_calc_flushing_volumes(idx);
        }
        auto select_flag = combo->GetFlag(selection);
-        combo->ShowBadge(select_flag == (int)PresetComboBox::FilamentAMSType::FROM_AMS);
+        combo->set_sync_badge(select_flag == (int)PresetComboBox::FilamentAMSType::FROM_AMS);
        q->on_filament_change(idx);
    }
    bool select_preset = !combo->selection_is_changed_according_to_physical_printers();
@@ -17772,6 +17952,19 @@ Sidebar::DockingState Plater::get_sidebar_docking_state() const { return p->get_

 void Plater::reset_window_layout() { p->reset_window_layout(); }

+void Plater::add_dock_pane(wxWindow* window, const std::string& name, const wxString& caption, const std::string& dock,
+                           const wxSize& size, std::function<void()> on_close)
+{
+    p->add_dock_pane(window, name, caption, dock, size, std::move(on_close));
+}
+void Plater::remove_dock_pane(wxWindow* window) { p->remove_dock_pane(window); }
+void Plater::remove_dock_panes()
+{
+    while (!p->m_dock_panes.empty())
+        p->remove_dock_pane(p->m_dock_panes.begin()->first);
+}
+void Plater::show_dock_pane(wxWindow* window, bool show) { p->show_dock_pane(window, show); }
+
 //BBS
 void Plater::select_curr_plate_all() { p->select_curr_plate_all(); }
 void Plater::remove_curr_plate_all() { p->remove_curr_plate_all(); }
@@ -20877,9 +21070,14 @@ bool Plater::is_same_printer_for_connected_and_selected(bool popup_warning)
    }
    if (!check_printer_initialized(obj, true, popup_warning))
        return false;
-    Preset *      machine_preset     = get_printer_preset(obj);
-    if (!machine_preset)
+    const std::string machine_model = obj->printer_type;
+    PresetBundle *preset_bundle = wxGetApp().preset_bundle;
+    const std::string selected_model = preset_bundle ? preset_bundle->printers.get_edited_preset().get_printer_type(preset_bundle) : std::string();
+    if (!DevPrinterConfigUtil::is_optional_printer_model_id(machine_model) &&
+        !DevPrinterConfigUtil::is_optional_printer_model_id(selected_model) &&
+        !get_printer_preset(obj)) {
        return false;
+    }

    if (wxGetApp().is_blocking_printing()) {
        if (popup_warning) {
@@ -476,6 +476,17 @@ public:

    void reset_window_layout();

+    // Dock panes sit alongside the sidebar; `window` must be a child of the Plater. `dock` is
+    // "left", "right", "bottom" or "float", and `size` is in DIPs. A pane closed from its own close
+    // button is destroyed after on_close runs; remove_dock_pane() destroys it without calling on_close.
+    void add_dock_pane(wxWindow* window, const std::string& name, const wxString& caption, const std::string& dock,
+                       const wxSize& size, std::function<void()> on_close);
+    void remove_dock_pane(wxWindow* window);
+    void show_dock_pane(wxWindow* window, bool show);
+    // Removes every dock pane without calling on_close, for MainFrame::shutdown() (app exit and a
+    // language switch), while the Plater and any floating frames still exist.
+    void remove_dock_panes();
+
    // Called after the Preferences dialog is closed and the program settings are saved.
    // Update the UI based on the current preferences.
    void update_ui_from_settings();
@@ -11,6 +11,7 @@ namespace Slic3r
            // IMPORTANT: ordinal order is the Plugins dialog Status sort priority.
            Activated,
            Error,
+            RuntimeError,
            Inactive,
            Loading
        };
@@ -21,11 +22,28 @@ namespace Slic3r
            {
            case PluginStatus::Activated: return "Activated";
            case PluginStatus::Error: return "Error";
+            case PluginStatus::RuntimeError: return "RuntimeError";
            case PluginStatus::Inactive: return "Inactive";
            case PluginStatus::Loading: return "Loading";
            }

            return "Inactive";
        }
+
+        // why: a plugin whose module is live but whose catalog carries an error is a
+        //   RUNTIME fault (e.g. a capability rejected at register time) - it stays
+        //   loaded/checked and is only flagged, distinct from a load-time Error where
+        //   the module never came up. Loading wins over both so an in-flight reload
+        //   never flashes an error.
+        inline PluginStatus resolve_plugin_status(bool loading, bool has_error, bool is_loaded)
+        {
+            if (loading)
+                return PluginStatus::Loading;
+            if (has_error)
+                return is_loaded ? PluginStatus::RuntimeError : PluginStatus::Error;
+            if (is_loaded)
+                return PluginStatus::Activated;
+            return PluginStatus::Inactive;
+        }
    }
 } // namespace Slic3r::GUI
@@ -193,6 +193,7 @@ nlohmann::json build_plugin_payload_item(const PluginDialogItem& dialog_item)
    payload_item["label"]                 = dialog_item.display_name;
    payload_item["source"]                = to_string(dialog_item.source);
    payload_item["status"]                = to_string(dialog_item.status);
+    payload_item["is_loaded"]             = dialog_item.is_loaded;
    payload_item["error"]                 = dialog_item.error_text;
    payload_item["update_status"]         = to_string(dialog_item.update_status);
    payload_item["unauthorized"]          = dialog_item.unauthorized;
@@ -337,14 +338,7 @@ PluginDialogItem build_plugin_dialog_item(const PluginDescriptor& descriptor)
    item.sharing_token = descriptor.sharing_token;
    item.thumbnail_url = descriptor.thumbnail_url;

-    if (item.loading)
-        item.status = PluginStatus::Loading;
-    else if (item.has_error)
-        item.status = PluginStatus::Error;
-    else if (item.is_loaded)
-        item.status = PluginStatus::Activated;
-    else
-        item.status = PluginStatus::Inactive;
+    item.status = resolve_plugin_status(item.loading, item.has_error, item.is_loaded);

    item.available_actions        = evaluate_action_policy(item);
    const bool has_enabled_script = std::any_of(item.capabilities.begin(), item.capabilities.end(),
@@ -790,6 +784,9 @@ void PluginsDialog::toggle_plugin(const std::string& plugin_key, bool enabled)
        }

        BOOST_LOG_TRIVIAL(info) << "Plugin unloaded from Plugins dialog: " << plugin_key;
+        // A user-disabled plugin has no meaningful error state.
+        if (!manager.clear_plugin_error(plugin_key))
+            BOOST_LOG_TRIVIAL(warning) << "Failed to clear plugin error for " << plugin_key << " (failed to find)";
        // A prior activation of this plugin is moot now; drop it so no stale "Activated" arrives later.
        if (m_activating_plugin_key == plugin_key)
            m_activating_plugin_key.clear();
@@ -63,6 +63,7 @@ std::string PrePrintChecker::get_print_status_info(PrintDialogStatus status)
    case PrintStatusRackReading: return "PrintStatusRackReading";
    case PrintStatusRackNozzleNumUnmeetWarning: return "PrintStatusRackNozzleNumUnmeetWarning";
    case PrintStatusHasUnreliableNozzleWarning: return "PrintStatusHasUnreliableNozzleWarning";
+    case PrintStatusOptionalPrinterModel: return "PrintStatusOptionalPrinterModel";
    case PrintStatusWarningExtFilamentNotMatch: return "PrintStatusWarningExtFilamentNotMatch";
    case PrintStatusFilamentWarningNozzleHRC: return "PrintStatusFilamentWarningNozzleHRC";
    case PrintStatusTPUUnsupportCaliOn: return "PrintStatusTPUUnsupportCaliOn";
@@ -104,6 +105,7 @@ wxString PrePrintChecker::get_pre_state_msg(PrintDialogStatus status)
    case PrintStatusNeedConsistencyUpgrading: return _L("Cannot send the print job to a printer whose firmware must be updated.");
    case PrintStatusBlankPlate: return _L("Cannot send a print job for an empty plate.");
    case PrintStatusTimelapseNoSdcard: return _L("Storage needs to be inserted to record timelapse.");
+    case PrintStatusOptionalPrinterModel: return _L("The selected printer model could not be identified, so compatibility with the print file configuration cannot be verified. Please verify the printer preset before sending.");
    case PrintStatusMixAmsAndVtSlotWarning: return _L("You have selected both external and AMS filaments for an extruder. You will need to manually switch the external filament during printing.");
    case PrintStatusTPUUnsupportAutoCali: return _L("TPU 90A/TPU 85A is too soft and does not support automatic Flow Dynamics calibration.");
    case PrintStatusWarningKvalueNotUsed: return _L("Set dynamic flow calibration to 'OFF' to enable custom dynamic flow value.");
@@ -379,4 +381,3 @@ bool PrinterMsgPanel::UpdateInfos(const std::vector<prePrintInfo>& infos)
 }
 };

-
--- a/Show More
+++ b/Show More