Merge branch 'main' into feat/printer-agent-infra

* ci: build Windows with build_win.bat and drop the old scripts

The deps and slicer jobs called build_release_vs.bat; they now call
build_win.bat. --deps-dir and --build-dir name the build/build-arm64
directories the cache keys and later steps already use, and the
script's own VsDevCmd call replaces the Enter-VsDevShell blocks.
With both stages configured each way into the same directory, the deps
superbuild is byte-identical and the slicer build files are
byte-identical apart from CMakeCache.txt recording how DEP_BUILD_DIR
was set.

Two changes beyond the script swap:

- The compiler is the clang-cl bundled with Visual Studio, the script's
  default. The old script's bare "clang-cl" resolved to the LLVM on the
  runner image's PATH, 20.1.8 on x64 and 22.1.8 on arm64; both arches
  now build with the 22.1.3 VS 18.9 ships. Cached dependencies are only
  rebuilt when deps/ changes, so they stay on the LLVM they were built
  with; the arm64 leg already links deps built with Clang 19 into a
  Clang 22 slicer.
- The deps job no longer zips the dependencies afterwards. The zip was
  never uploaded and was not in the cached path.

A failed cmake --build now fails the job. The old script returned 0, so
the arm64 failure fixed in #15719 was reported as success and the
half-built dependencies were saved to the cache.

build_release.bat, build_release_vs.bat and build_release_vs2022.bat are
removed; nothing referenced them any more.

* ci: run Build all when the Windows build script changes; tests doc builds the deps

The push filter of build_all.yml never listed a build script, and CI
now depends on build_win.bat, so it and its test suite join the list
the pull_request filter already has.

tests/AGENTS.md told Windows to run build_win.bat --run-tests, which
only implies -s and stops at the dependency check on a clean checkout.
The old build_release_vs.bat tests built the dependencies first, so
the line now says -ds --run-tests.

.github/workflows/build_all.yml

@@ -14,6 +14,9 @@ on:
      - 'localization/**'
      - 'resources/**'
      - ".github/workflows/build_*.yml"
+     - ".github/workflows/unit_tests*.yml"
+     - 'build_win.bat'
+     - 'scripts/test_build_win.ps1'
      - 'scripts/build_preset_cache.*'
      - 'scripts/flatpak/**'
      - 'scripts/msix/**'
@@ -30,9 +33,8 @@ on:
      - '**/CMakeLists.txt'
      - 'version.inc'
      - ".github/workflows/build_*.yml"
+     - ".github/workflows/unit_tests*.yml"
      - 'build_linux.sh'
-     - 'build_release_vs.bat'
-     - 'build_release_vs2022.bat'
      - 'build_win.bat'
      - 'scripts/test_build_win.ps1'
      - 'build_release_macos.sh'
@@ -207,7 +209,7 @@ jobs:
           ./validator-bin/OrcaSlicer_profile_validator -p "${{ github.workspace }}/resources/profiles" -s -l 2
   publish_test_results:
     name: Publish Test Results
-    needs: [unit_tests_linux_x86_64, unit_tests_linux_aarch64, unit_tests_windows_x64, unit_tests_windows_arm64, unit_tests_macos_arm64]
+    needs: [unit_tests_linux_x86_64, unit_tests_linux_aarch64, unit_tests_windows_x64, unit_tests_windows_arm64, unit_tests_macos_arm64, unit_tests_flatpak_x86_64, unit_tests_flatpak_aarch64]
     if: ${{ !cancelled() }}
     runs-on: ubuntu-latest
     steps:
@@ -324,9 +326,16 @@ jobs:
         sed -i '/^build-options:/a\  no-debuginfo: true\n  strip: true' \
           scripts/flatpak/com.orcaslicer.OrcaSlicer.yml
       shell: bash
-    - name: Inject git commit hash into Flatpak manifest
+    # flatpak-builder reuses a module from its cache when the definition and
+    # sources are unchanged, so a re-run of the same commit would skip the
+    # OrcaSlicer module and ship no test asset. A per-run value in that module's
+    # env keeps it rebuilding; orca_deps stays cached, and the compiler cache
+    # still serves the rebuild.
+    - name: Inject commit hash and flatpak-builder cache buster into Flatpak manifest
+      env:
+        flatpak_builder_cache_buster: ${{ github.run_id }}-${{ github.run_attempt }}
       run: |
-        sed -i "/name: OrcaSlicer/{n;s|buildsystem: simple|buildsystem: simple\n    build-options:\n      env:\n        git_commit_hash: \"$git_commit_hash\"|}" \
+        sed -i "/name: OrcaSlicer/{n;s|buildsystem: simple|buildsystem: simple\n    build-options:\n      env:\n        flatpak_builder_cache_buster: \"$flatpak_builder_cache_buster\"\n        git_commit_hash: \"$git_commit_hash\"|}" \
           scripts/flatpak/com.orcaslicer.OrcaSlicer.yml
       shell: bash
     # flatpak-builder's --ccache only wraps cc and gcc, and the manifest builds
@@ -372,6 +381,10 @@ jobs:
         save-cache: false
         arch: ${{ matrix.variant.arch }}
         upload-artifact: false
+        # run-tests fires the module's build-only test-commands; keep-build-dirs
+        # retains the binaries for the packaging step below.
+        run-tests: true
+        keep-build-dirs: true
     # The build has just touched everything it can use, so an object untouched
     # for a week is dead, usually orphaned by a flag change.
     - name: Compiler cache statistics
@@ -425,3 +438,46 @@ jobs:
         asset_name: OrcaSlicer-Linux-flatpak_nightly${{ env.nightly_suffix }}_${{ matrix.variant.arch }}.flatpak
         asset_content_type: application/octet-stream
         max_releases: 1 # optional, if there are more releases than this matching the asset_name, the oldest ones are going to be deleted
+    # The asset is /app (the exes link it at runtime) plus the build tree
+    # slimmed to what ctest needs.
+    - name: Package flatpak test asset
+      shell: bash
+      run: |
+        d=$(ls -d .flatpak-builder/build/OrcaSlicer-* | tail -1)
+        find "$d/build_flatpak" -mindepth 1 -maxdepth 1 ! -name tests -exec rm -rf {} +
+        # Strip debug info (the SDK builds with -g, only the app gets stripped);
+        # the bounds checks are compiled in, so a stripped exe still catches them.
+        find "$d/build_flatpak/tests" -type f -perm -u+x -exec strip --strip-unneeded {} + 2>/dev/null || true
+        # At runtime the tests read tests/ (TEST_DATA_DIR), scripts/, and under
+        # resources/ the shipped profiles (PROFILES_DIR) and the printers/ maps.
+        find "$d" -mindepth 1 -maxdepth 1 -type d \
+          ! -name tests ! -name build_flatpak ! -name scripts ! -name resources -exec rm -rf {} +
+        find "$d/resources" -mindepth 1 -maxdepth 1 ! -name profiles ! -name printers -exec rm -rf {} +
+        tar -cf flatpak-test-asset.tar flatpak_app "$d"
+    - name: Upload flatpak test asset
+      uses: actions/upload-artifact@v7
+      with:
+        name: ${{ github.sha }}-flatpak-tests-${{ matrix.variant.arch }}
+        path: flatpak-test-asset.tar
+        retention-days: 1
+    # keep-build-dirs would otherwise land in the flatpak-builder cache saved post-job.
+    - name: Drop the kept build dirs before the flatpak-builder cache saves
+      if: always()
+      shell: bash
+      run: rm -rf .flatpak-builder/build
+  unit_tests_flatpak_x86_64:
+    name: Flatpak x86_64
+    needs: flatpak
+    if: ${{ !cancelled() && success() }}
+    uses: ./.github/workflows/unit_tests_flatpak.yml
+    with:
+      os: ubuntu-24.04
+      artifact: ${{ github.sha }}-flatpak-tests-x86_64
+  unit_tests_flatpak_aarch64:
+    name: Flatpak aarch64
+    needs: flatpak
+    if: ${{ !cancelled() && success() }}
+    uses: ./.github/workflows/unit_tests_flatpak.yml
+    with:
+      os: ubuntu-24.04-arm
+      artifact: ${{ github.sha }}-flatpak-tests-aarch64

.github/workflows/build_check_cache.yml

@@ -41,7 +41,8 @@ jobs:
           # restores one it cannot use. Linux amd64 passes no arch deliberately, so
           # 'linux-clang' keeps the cache it already has.
           cache-os: ${{ runner.os == 'macOS' && format('macos-{0}', inputs.arch) || (runner.os == 'Windows' && format('windows-{0}-{1}', inputs.arch, inputs.compiler) || format('linux-clang{0}', inputs.arch && format('-{0}', inputs.arch) || '')) }}
-          # ARM64 builds use the build-arm64 tree (see build_release_vs.bat); x64/other use build.
+          # The Windows ARM64 deps build in build-arm64, all others under build;
+          # build_deps.yml and build_orca.yml pass the Windows directory to build_win.bat.
           dep-folder-name: ${{ runner.os == 'macOS' && format('/{0}', inputs.arch) || (runner.os == 'Windows' && inputs.arch == 'arm64') && '-arm64/OrcaSlicer_dep' || '/OrcaSlicer_dep' }}
           output-cmd: ${{ runner.os == 'Windows' && '$env:GITHUB_OUTPUT' || '"$GITHUB_OUTPUT"'}}
         run: |

.github/workflows/build_deps.yml

@@ -138,25 +138,11 @@ jobs:
             if (-not "${{ vars.SELF_HOSTED }}") {
               choco install strawberryperl
             }
-            $arch = "${{ inputs.arch }}"
-            # -l selects clang-cl and -x Ninja; together they build the deps with clang.
-            $clang = "${{ inputs.compiler }}" -eq "clang"
-            $flags = if ($clang) { "-l", "-x" } else { @() }
-            if ($clang) {
-              # OpenSSL builds with nmake, which needs a VC environment.
-              $vswhere = "${env:ProgramFiles(x86)}\Microsoft Visual Studio\Installer\vswhere.exe"
-              $vs = & $vswhere -latest -property installationPath
-              $devArch = if ($arch -eq "arm64") { "arm64" } else { "amd64" }
-              Import-Module "$vs\Common7\Tools\Microsoft.VisualStudio.DevShell.dll"
-              Enter-VsDevShell -VsInstallPath $vs -SkipAutomaticLocation -DevCmdArguments "-arch=$devArch"
-            }
-            if ($arch -eq "arm64") {
-              .\build_release_vs.bat deps arm64 @flags
-              .\build_release_vs.bat pack arm64
-            } else {
-              .\build_release_vs.bat deps @flags
-              .\build_release_vs.bat pack
-            }
+            # cache-path is the install directory inside the deps build directory.
+            $deps = (Split-Path "${{ inputs.cache-path }}").Replace('\', '/')
+            # -l compiles with Visual Studio's clang-cl and -x builds with Ninja; --msvc --msbuild is cl under the Visual Studio generator.
+            $flags = if ("${{ inputs.compiler }}" -eq "clang") { "-l", "-x" } else { "--msvc", "--msbuild" }
+            .\build_win.bat -d --arch ${{ inputs.arch }} --deps-dir $deps @flags
         shell: pwsh
 
       - name: Build on Mac ${{ inputs.arch }}

.github/workflows/build_orca.yml

@@ -450,21 +450,13 @@ jobs:
         # env:
         #   WindowsSdkDir: 'C:\Program Files (x86)\Windows Kits\10\'
         #   WindowsSDKVersion: '10.0.26100.0\'
-        # "tests" builds the unit tests too; the unit_tests_windows_* jobs run them.
+        # --tests builds the unit tests too; the unit_tests_windows_* jobs run them.
         run: |
-          $arch = "${{ inputs.arch }}"
-          # -l selects clang-cl and -x Ninja; together they build the slicer with clang.
-          $clang = "${{ inputs.compiler }}" -eq "clang"
-          $flags = if ($clang) { "-l", "-x" } else { @() }
-          if ($clang) {
-            # Build against the same VC toolchain and SDK as the dependencies.
-            $vswhere = "${env:ProgramFiles(x86)}\Microsoft Visual Studio\Installer\vswhere.exe"
-            $vs = & $vswhere -latest -property installationPath
-            $devArch = if ($arch -eq "arm64") { "arm64" } else { "amd64" }
-            Import-Module "$vs\Common7\Tools\Microsoft.VisualStudio.DevShell.dll"
-            Enter-VsDevShell -VsInstallPath $vs -SkipAutomaticLocation -DevCmdArguments "-arch=$devArch"
-          }
-          if ($arch -eq "arm64") { .\build_release_vs.bat slicer arm64 @flags tests } else { .\build_release_vs.bat slicer @flags tests }
+          # cache-path is the install directory inside the deps build directory.
+          $deps = (Split-Path "${{ inputs.cache-path }}").Replace('\', '/')
+          # -l compiles with Visual Studio's clang-cl and -x builds with Ninja; --msvc --msbuild is cl under the Visual Studio generator.
+          $flags = if ("${{ inputs.compiler }}" -eq "clang") { "-l", "-x" } else { "--msvc", "--msbuild" }
+          .\build_win.bat -s --tests -i --arch ${{ inputs.arch }} --build-dir $env:BUILD_DIR --deps-dir $deps @flags
         shell: pwsh
 
       - name: Build system preset cache (Windows)
@@ -684,18 +676,6 @@ jobs:
           name: OrcaSlicer_profile_validator_Linux_ubuntu_${{ env.ubuntu-ver }}_${{ env.ver }}
           path: './build/src/Release/OrcaSlicer_profile_validator'
 
-      # generate_system_cache is what scripts/build_preset_cache.sh bakes the
-      # <vendor>.opc caches with; it was already built by the "Build system
-      # preset cache (Linux)" step above. The .opc format is 64-bit
-      # little-endian native, i.e. identical across every platform Orca ships,
-      # so only the Linux binary is published.
-      - name: Upload generate_system_cache Ubuntu
-        if: ${{ ! env.ACT && runner.os == 'Linux' && !vars.SELF_HOSTED && inputs.arch != 'aarch64' }}
-        uses: actions/upload-artifact@v7
-        with:
-          name: generate_system_cache_Linux_ubuntu_${{ env.ubuntu-ver }}_${{ env.ver }}
-          path: './build/src/dev-utils/Release/generate_system_cache'
-
       - name: Deploy Ubuntu release
         if: ${{ github.repository == 'OrcaSlicer/OrcaSlicer' && ! env.ACT && env.deploy_nightly == 'true' && runner.os == 'Linux' && !vars.SELF_HOSTED }}
         uses: WebFreak001/deploy-nightly@v3.2.0
@@ -726,17 +706,6 @@ jobs:
           asset_content_type: application/octet-stream
           max_releases: 1
 
-      - name: Deploy Ubuntu generate_system_cache release
-        if: ${{ github.repository == 'OrcaSlicer/OrcaSlicer' && ! env.ACT && github.ref == 'refs/heads/main' && runner.os == 'Linux' && !vars.SELF_HOSTED && inputs.arch != 'aarch64' }}
-        uses: WebFreak001/deploy-nightly@v3.2.0
-        with:
-          upload_url: https://uploads.github.com/repos/OrcaSlicer/OrcaSlicer/releases/137995723/assets{?name,label}
-          release_id: 137995723
-          asset_path: ./build/src/dev-utils/Release/generate_system_cache
-          asset_name: generate_system_cache_Linux${{ env.ubuntu-ver-str }}_nightly
-          asset_content_type: application/octet-stream
-          max_releases: 1
-
       - name: Deploy orca_custom_preset_tests
         if: ${{ github.repository == 'OrcaSlicer/OrcaSlicer' && ! env.ACT && github.ref == 'refs/heads/main' && runner.os == 'Linux' && !vars.SELF_HOSTED && inputs.arch != 'aarch64' }}
         uses: WebFreak001/deploy-nightly@v3.2.0

.github/workflows/check_profiles.yml

@@ -9,8 +9,9 @@ on:
     - release/*
     paths:
     - 'resources/profiles/**'
-    # The extra JSON check also validates resources/printers/bambu_filament_ids.json,
-    # and lives in scripts/, so a PR touching only those must still run this workflow.
+    # orca_profile_tool.py also validates resources/printers/bambu_filament_ids.json, and
+    # both it and its tests live in scripts/, so a PR touching only those must still run
+    # this workflow.
     - 'resources/printers/**'
     - 'scripts/**'
     - ".github/workflows/check_profiles.yml"
@@ -36,12 +37,23 @@ jobs:
       - name: Checkout repository
         uses: actions/checkout@v7
 
-      - name: Run extra JSON check
-        id: extra_json_check
+      # Deliberately not continue-on-error, unlike every check below: if the tool itself is
+      # broken, nothing it then reports about the profiles is worth reading.
+      - name: Run the profile tool's own unit tests
+        run: python3 -m unittest discover -s scripts/tests -t scripts
+
+      # What the validator below cannot see. It loads the tree the way the slicer does, so
+      # it never notices a profile no <vendor>.json indexes, a preset name two files claim,
+      # an id that is not the mint of its own triple, or a file that normalize and
+      # update-index would still rewrite.
+      # The step id is the handle the PR comment and the failure gate below use; renaming it
+      # silently disables them.
+      - name: Check profiles (orca_profile_tool.py)
+        id: profile_tool
         continue-on-error: true
         run: |
           set +e
-          python3 ./scripts/orca_extra_profile_check.py 2>&1 | tee ${{ runner.temp }}/extra_json_check.log
+          python3 ./scripts/orca_profile_tool.py check 2>&1 | tee ${{ runner.temp }}/profile_tool.log
           exit ${PIPESTATUS[0]}
 
       # download
@@ -186,7 +198,7 @@ jobs:
           echo "${{ github.event.pull_request.number }}" > ${{ runner.temp }}/profile-check-results/pr_number.txt
 
       - name: Prepare comment artifact
-        if: ${{ always() && github.event_name == 'pull_request' && (steps.extra_json_check.outcome == 'failure' || steps.validate_system.outcome == 'failure' || steps.validate_slice.outcome == 'failure' || steps.validate_filament_subtypes.outcome == 'failure' || steps.validate_custom.outcome == 'failure') }}
+        if: ${{ always() && github.event_name == 'pull_request' && (steps.profile_tool.outcome == 'failure' || steps.validate_system.outcome == 'failure' || steps.validate_slice.outcome == 'failure' || steps.validate_filament_subtypes.outcome == 'failure' || steps.validate_custom.outcome == 'failure') }}
         run: |
           {
             # Marker matched by check_profiles_comment.yml to delete prior comments.
@@ -194,11 +206,11 @@ jobs:
             echo "## :x: Profile Validation Errors"
             echo ""
 
-            if [ "${{ steps.extra_json_check.outcome }}" = "failure" ]; then
-              echo "### Extra JSON Check Failed"
+            if [ "${{ steps.profile_tool.outcome }}" = "failure" ]; then
+              echo "### Profile Check Failed (orca_profile_tool.py)"
               echo ""
               echo '```'
-              head -c 30000 ${{ runner.temp }}/extra_json_check.log || echo "No output captured"
+              head -c 30000 ${{ runner.temp }}/profile_tool.log || echo "No output captured"
               echo '```'
               echo ""
             fi
@@ -240,7 +252,7 @@ jobs:
             fi
 
             echo "---"
-            echo "*Please fix the above errors and push a new commit.*"
+            echo '*Fix the errors above and push a new commit. To reproduce this run locally: `scripts/check_profile.sh`, or `scripts\check_profile.bat` on Windows.*'
           } > ${{ runner.temp }}/profile-check-results/pr_comment.md
 
       - name: Upload comment artifact
@@ -252,7 +264,8 @@ jobs:
           retention-days: 1
 
       - name: Fail if any check failed
-        if: ${{ always() && (steps.extra_json_check.outcome == 'failure' || steps.validate_system.outcome == 'failure' || steps.validate_slice.outcome == 'failure' || steps.validate_filament_subtypes.outcome == 'failure' || steps.validate_custom.outcome == 'failure') }}
+        if: ${{ always() && (steps.profile_tool.outcome == 'failure' || steps.validate_system.outcome == 'failure' || steps.validate_slice.outcome == 'failure' || steps.validate_filament_subtypes.outcome == 'failure' || steps.validate_custom.outcome == 'failure') }}
         run: |
-          echo "One or more profile checks failed. See above for details."
+          echo "One or more profile checks failed; see the step logs above."
+          echo 'Reproduce the whole run locally with scripts/check_profile.sh (scripts\check_profile.bat on Windows).'
           exit 1

.github/workflows/post_merge_profiles.yml

@@ -1,253 +0,0 @@
-name: Post-merge profiles
-
-# Push-triggered counterpart to check_profiles.yml (which only gates PRs). When a
-# profile change lands on main or a release branch, rebuild the affected vendors'
-# binary preset caches (<vendor>.opc) and publish each as a versioned ZIP asset on
-# a per-Orca-version release of the profiles repo. From there OrcaCloud's OTA
-# Manager lists the asset, a maintainer attaches a changelog and hits Publish, and
-# only then does it become a live OTA update - this workflow does none of that
-# last part (no changelog, no R2, no webhook).
-#
-# Asset contract expected by OrcaCloud's release scanner:
-#   ^(\d+\.\d+\.\d+)_([^_]+)_(\d+(?:\.\d+){3})_(\d{12})\.zip$
-#     <orca_ver>_<vendor>_<profile_version>_<UTC yyyymmddHHMM>.zip   (zip root: <vendor>.opc)
-#
-# Setup (App + secrets): docs/ota/post-merge-profiles-setup.md
-
-on:
-  push:
-    branches:
-    - main
-    - release/*
-    paths:
-    - 'resources/profiles/**'
-    - '.github/workflows/post_merge_profiles.yml'
-
-  workflow_dispatch:
-
-permissions:
-  contents: read
-
-# One run per branch; let a run finish rather than cancel it, since it publishes.
-concurrency:
-  group: post-merge-profiles-${{ github.ref }}
-  cancel-in-progress: false
-
-env:
-  # generate_system_cache is published to this repo's own nightly-builds release
-  # by build_orca.yml's Linux leg. The job guard pins github.repository to
-  # OrcaSlicer/OrcaSlicer, so this resolves there.
-  TOOL_REPO: ${{ github.repository }}
-  TOOL_ASSET: generate_system_cache_Linux_Ubuntu2404_nightly
-  # Where per-vendor ZIP assets are published; OrcaCloud's OTA reads this repo.
-  PROFILES_OWNER: OrcaSlicer
-  PROFILES_REPO: orcaslicer-profiles
-
-jobs:
-  publish_profile_caches:
-    name: Publish profile caches
-    if: ${{ github.repository == 'OrcaSlicer/OrcaSlicer' }}
-    # FOLDER_MERGERS is an environment-scoped variable, shared with the PR
-    # merge bot. Keep this environment free of protection rules so this
-    # push-triggered job does not wait for a reviewer.
-    environment: merge-delegation
-    runs-on: ubuntu-24.04
-    steps:
-      - name: Checkout repository
-        uses: actions/checkout@v7
-        with:
-          # Enough history to reach github.event.before for the changed-vendor
-          # diff on a normal push; deeper pushes fall back to HEAD^..HEAD in the
-          # step below. fetch-depth: 0 would clone all of OrcaSlicer's history.
-          fetch-depth: 50
-
-      - name: Resolve changed vendors
-        id: vendors
-        shell: bash
-        env:
-          FOLDER_MERGERS: ${{ vars.FOLDER_MERGERS }}
-        run: |
-          set -euo pipefail
-          base='${{ github.event.before }}'
-          head='${{ github.sha }}'
-          # Zero SHA (branch created / force push) or manual dispatch: fall back
-          # to this commit's own diff.
-          if [ -z "$base" ] || [ "$base" = "0000000000000000000000000000000000000000" ] || ! git cat-file -e "$base^{commit}" 2>/dev/null; then
-            base="$head^"
-          fi
-          echo "Diffing $base..$head"
-
-          mapfile -t candidates < <(
-            git diff --name-only "$base" "$head" -- resources/profiles \
-              | sed -nE 's#^resources/profiles/([^/]+)/.*#\1#p; s#^resources/profiles/([^/]+)\.json$#\1#p' \
-              | sort -u
-          )
-
-          vendors=()
-          for v in "${candidates[@]:-}"; do
-            [ -n "$v" ] || continue
-            json="resources/profiles/$v.json"
-            # A vendor has a manifest plus either a preset directory or a version
-            # field; this drops non-vendor files such as blacklist.json.
-            if [ -f "$json" ] && { [ -d "resources/profiles/$v" ] || jq -e '.version' "$json" >/dev/null 2>&1; }; then
-              vendors+=("$v")
-            fi
-          done
-
-          if [ "${#vendors[@]}" -eq 0 ]; then
-            echo "No changed vendor profiles in this push; nothing to publish."
-            echo "vendors=" >> "$GITHUB_OUTPUT"
-            exit 0
-          fi
-
-          # A vendor is eligible only when both the profile directory and its
-          # sibling bundle JSON are covered by at least one FOLDER_MERGERS
-          # grant. The account part is intentionally ignored here: this is a
-          # post-merge safety check, not an authorization check for a command.
-          grants=()
-          while IFS= read -r raw_line; do
-            line="${raw_line#"${raw_line%%[![:space:]]*}"}"
-            line="${line%"${line##*[![:space:]]}"}"
-            [ -n "$line" ] || continue
-            [[ "$line" == \#* ]] && continue
-            [[ "$line" == *:* ]] || continue
-
-            grant="${line#*:}"
-            grant="${grant#"${grant%%[![:space:]]*}"}"
-            grant="${grant%"${grant##*[![:space:]]}"}"
-            while [[ "$grant" == */ ]]; do grant="${grant%/}"; done
-            grants+=("$grant")
-          done <<< "${FOLDER_MERGERS:-}"
-
-          is_granted() {
-            local path="$1"
-            local grant
-            for grant in "${grants[@]:-}"; do
-              if [[ "$path" == "$grant" || "$path" == "$grant/"* ]]; then
-                return 0
-              fi
-            done
-            return 1
-          }
-
-          unauthorized=()
-          for v in "${vendors[@]}"; do
-            if ! is_granted "resources/profiles/$v" || ! is_granted "resources/profiles/$v.json"; then
-              unauthorized+=("$v")
-            fi
-          done
-
-          if [ "${#unauthorized[@]}" -ne 0 ]; then
-            echo "Changed vendor profiles are not covered by FOLDER_MERGERS: ${unauthorized[*]}"
-            echo "No profile caches will be published for this push."
-            echo "vendors=" >> "$GITHUB_OUTPUT"
-            exit 0
-          fi
-
-          printf 'Changed vendors: %s\n' "${vendors[*]}"
-          echo "vendors=${vendors[*]}" >> "$GITHUB_OUTPUT"
-
-      - name: Resolve Orca version
-        id: orca
-        if: steps.vendors.outputs.vendors != ''
-        shell: bash
-        run: |
-          set -euo pipefail
-          raw="$(sed -nE 's/^set\(SoftFever_VERSION "([^"]+)".*/\1/p' version.inc | head -1)"
-          [ -n "$raw" ] || { echo "::error::could not read SoftFever_VERSION from version.inc"; exit 1; }
-          orca_ver="${raw%%-*}"
-          if ! [[ "$orca_ver" =~ ^[0-9]+\.[0-9]+\.[0-9]+$ ]]; then
-            echo "::error::Orca version '$orca_ver' (from '$raw') is not X.Y.Z"; exit 1
-          fi
-          # release_tag is what the desktop client sends as orca_version and what
-          # OrcaCloud keys R2 on; orca_ver (X.Y.Z) is the asset-name prefix.
-          echo "release_tag=$raw" >> "$GITHUB_OUTPUT"
-          echo "orca_ver=$orca_ver" >> "$GITHUB_OUTPUT"
-          echo "Orca version: release_tag=$raw asset_prefix=$orca_ver"
-
-      - name: Validate profile versions
-        id: pver
-        if: steps.vendors.outputs.vendors != ''
-        shell: bash
-        run: |
-          set -euo pipefail
-          : > "$RUNNER_TEMP/pver.tsv"
-          for v in ${{ steps.vendors.outputs.vendors }}; do
-            pv="$(jq -r '.version // empty' "resources/profiles/$v.json")"
-            if ! [[ "$pv" =~ ^[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+$ ]]; then
-              echo "::error::vendor $v version '${pv:-<none>}' must be 4 numeric parts (A.B.C.D) for the OTA asset name; fix resources/profiles/$v.json"
-              exit 1
-            fi
-            printf '%s\t%s\n' "$v" "$pv" >> "$RUNNER_TEMP/pver.tsv"
-            echo "$v -> $pv"
-          done
-
-      - name: Download generate_system_cache
-        if: steps.vendors.outputs.vendors != ''
-        shell: bash
-        env:
-          # gh (with the default token) rather than an unauthenticated curl: keeps
-          # working if TOOL_REPO is ever private and avoids anonymous rate limits.
-          GH_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-        run: |
-          set -euo pipefail
-          gh release download nightly-builds --repo "$TOOL_REPO" \
-            --pattern "$TOOL_ASSET" --output generate_system_cache --clobber
-          chmod +x generate_system_cache
-
-      - name: Build caches and package assets
-        id: pkg
-        if: steps.vendors.outputs.vendors != ''
-        shell: bash
-        run: |
-          set -euo pipefail
-          # One timestamp for the whole run so a multi-vendor merge groups together.
-          ts="$(date -u +%Y%m%d%H%M)"
-          orca_ver='${{ steps.orca.outputs.orca_ver }}'
-          out="$RUNNER_TEMP/assets"
-          mkdir -p "$out"
-
-          for v in ${{ steps.vendors.outputs.vendors }}; do
-            ./generate_system_cache -p "$GITHUB_WORKSPACE/resources/profiles" -v "$v" -l 2
-            opc="resources/profiles/$v.opc"
-            [ -f "$opc" ] || { echo "::error::$opc was not generated"; exit 1; }
-            pv="$(awk -F'\t' -v v="$v" '$1==v{print $2}' "$RUNNER_TEMP/pver.tsv")"
-            name="${orca_ver}_${v}_${pv}_${ts}.zip"
-            ( cd resources/profiles && zip -q -j "$out/$name" "$v.opc" )
-            echo "packaged $name"
-          done
-          echo "dir=$out" >> "$GITHUB_OUTPUT"
-
-      - name: Mint profiles-repo token
-        id: token
-        if: steps.vendors.outputs.vendors != ''
-        uses: actions/create-github-app-token@v1
-        with:
-          app-id: ${{ secrets.PROFILES_APP_ID }}
-          private-key: ${{ secrets.PROFILES_APP_PRIVATE_KEY }}
-          owner: ${{ env.PROFILES_OWNER }}
-          repositories: ${{ env.PROFILES_REPO }}
-
-      - name: Publish assets to profiles release
-        if: steps.vendors.outputs.vendors != ''
-        shell: bash
-        env:
-          GH_TOKEN: ${{ steps.token.outputs.token }}
-          RELEASE_TAG: ${{ steps.orca.outputs.release_tag }}
-          ASSET_DIR: ${{ steps.pkg.outputs.dir }}
-        run: |
-          set -euo pipefail
-          repo="$PROFILES_OWNER/$PROFILES_REPO"
-          if ! gh release view "$RELEASE_TAG" --repo "$repo" >/dev/null 2>&1; then
-            echo "Creating release $RELEASE_TAG on $repo"
-            gh release create "$RELEASE_TAG" --repo "$repo" \
-              --title "$RELEASE_TAG" --notes "Profile cache assets for Orca $RELEASE_TAG." \
-              --latest=false
-          fi
-          # Asset names are timestamp-unique; a clash means a bug, so don't --clobber.
-          gh release upload "$RELEASE_TAG" --repo "$repo" "$ASSET_DIR"/*.zip
-
-          {
-            echo "### Published to \`$repo\` release \`$RELEASE_TAG\`"
-            for f in "$ASSET_DIR"/*.zip; do echo "- \`$(basename "$f")\`"; done
-          } >> "$GITHUB_STEP_SUMMARY"

.github/workflows/unit_tests.yml

@@ -54,8 +54,10 @@ jobs:
         shell: bash
         run: |
           tar -xvf build_tests.tar
-          # Multi-config generators (Windows/macOS) need a config; Linux is single-config.
-          scripts/run_unit_tests.sh "${{ inputs.test-dir }}" "${{ runner.os != 'Linux' && 'Release' || '' }}"
+          # Every platform builds with a multi-config generator (build_linux.sh uses Ninja
+          # Multi-Config), so ctest needs the config: without it, plain add_test() tests
+          # lose their labels and report "Not Run".
+          scripts/run_unit_tests.sh "${{ inputs.test-dir }}" Release
       - name: Upload Test Logs
         if: ${{ failure() }}
         uses: actions/upload-artifact@v7

.github/workflows/unit_tests_flatpak.yml

@@ -0,0 +1,67 @@
+name: Flatpak Unit Tests
+
+# Run the flatpak build's test asset inside the sandbox, once per arch. The
+# GNOME SDK's _GLIBCXX_ASSERTIONS gives a bounds-checked STL that catches
+# out-of-bounds reads no other test leg does.
+on:
+  workflow_call:
+    inputs:
+      os:
+        required: true
+        type: string
+      artifact:
+        description: Test asset uploaded by the flatpak build leg
+        required: true
+        type: string
+
+jobs:
+  unit_tests_flatpak:
+    name: Flatpak Unit Tests
+    runs-on: ${{ inputs.os }}
+    container:
+      image: ghcr.io/flathub-infra/flatpak-github-actions:gnome-50
+      options: --privileged
+    steps:
+      - name: Restore test asset
+        uses: actions/download-artifact@v8
+        with:
+          name: ${{ inputs.artifact }}
+      - name: Run unit tests (bounds-checked sandbox)
+        timeout-minutes: 20
+        shell: bash
+        run: |
+          tar -xf flatpak-test-asset.tar
+          # Recreate the stable module symlink so /run/build/OrcaSlicer resolves.
+          d=$(ls -d .flatpak-builder/build/OrcaSlicer-* | tail -1)
+          ln -sfn "$(basename "$d")" .flatpak-builder/build/OrcaSlicer
+          # The runtime + SDK + the llvm extension the app metadata references,
+          # which `flatpak build` mounts; best-effort, the image may have them.
+          flatpak remote-add --if-not-exists --user flathub https://flathub.org/repo/flathub.flatpakrepo
+          flatpak install --user -y --noninteractive flathub \
+            org.gnome.Platform//50 org.gnome.Sdk//50 org.freedesktop.Sdk.Extension.llvm21//25.08 || true
+          # `flatpak build` uses bwrap (no rofiles-fuse, which this container
+          # rejects); bind-mount the build tree so the baked TEST_DATA_DIR resolves.
+          flatpak build --die-with-parent --share=network \
+            --bind-mount=/run/build="$PWD/.flatpak-builder/build" \
+            flatpak_app \
+            bash -c 'cd /run/build/OrcaSlicer && scripts/run_unit_tests.sh build_flatpak/tests'
+      - name: Collect test results
+        if: always()
+        shell: bash
+        run: |
+          d=$(ls -d .flatpak-builder/build/OrcaSlicer-* 2>/dev/null | tail -1 || true)
+          [ -n "$d" ] && [ -f "$d/ctest_results.xml" ] && cp "$d/ctest_results.xml" ctest_results.xml || true
+      - name: Upload Test Results
+        if: always()
+        uses: actions/upload-artifact@v7
+        with:
+          name: test-results-${{ inputs.artifact }}
+          path: ctest_results.xml
+          retention-days: 5
+          if-no-files-found: warn
+      - name: Delete Test Asset
+        if: success()
+        uses: geekyeggo/delete-artifact@v6
+        with:
+          name: ${{ inputs.artifact }}
+          failOnError: false

AGENTS.md

@@ -20,9 +20,9 @@ cmake --build . --config %build_type% --target ALL_BUILD -- -m
 Catch2 framework. Tests in `tests/`; see [tests/AGENTS.md](tests/AGENTS.md) for where a new test belongs and the conventions to follow.
 
 ```bash
-cd build && ctest --output-on-failure           # all tests
-ctest --test-dir ./tests/libslic3r              # individual suite
-ctest --test-dir ./tests/fff_print
+cd build && ctest -C Release --output-on-failure    # all tests
+ctest --test-dir ./tests/libslic3r -C Release       # individual suite
+ctest --test-dir ./tests/fff_print -C Release
 ```
 
 ## Documentation
@@ -64,16 +64,16 @@ ctest --test-dir ./tests/fff_print
 - Keep code concise and clear. Manually simplify AI generated bloated codes before review.
 - Include targeted tests or documented verification for behavior changes, especially in slicing logic, profiles, formats, and GUI defaults.
 - For profile changes (`resources/profiles/<Vendor>/**`), check that `version` in the sibling `resources/profiles/<Vendor>.json` was bumped.
-- For translation changes (`localization/i18n/**/*.po`), check that recurring terms match the [Localization glossary](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/guides/localization_glossary.md) for that language.
+- For translation changes (`localization/i18n/**/*.po`), check that recurring terms match the [Localization glossary](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/developer_reference/localization_glossary.md) for that language.
 
 ## Localization & translations
 
 Catalogs live in `localization/i18n/<lang>/OrcaSlicer_<lang>.po`; the template is `OrcaSlicer.pot`.
-See the [Localization guide](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/guides/localization_guide.md) for the human-facing version of these principles.
+See the [Localization guide](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/developer_reference/localization_guide.md) for the human-facing version of these principles.
 
 ### Terminology
 
-- Use the [Localization glossary](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/guides/localization_glossary.md) as the source of truth for recurring terms, so the same English term is always rendered the same way within a language, and terms that must stay in English (brand/product names, acronyms, materials, file formats, G-code tokens, macros/variables/identifiers) are not translated.
+- Use the [Localization glossary](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/developer_reference/localization_glossary.md) as the source of truth for recurring terms, so the same English term is always rendered the same way within a language, and terms that must stay in English (brand/product names, acronyms, materials, file formats, G-code tokens, macros/variables/identifiers) are not translated.
 - If a term's established translation changes, update both the affected `.po` files and the glossary (`localization_glossary.tsv`, then regenerate) so they stay in sync.
 - Translate the *meaning*, not the words. Check what the string actually controls before translating it — English reuses one word for different things. `Flow ratio` (multiplier), `Flow Rate` (throughput) and `Flow Dynamics` (pressure compensation) are three different terms; `extruder` may mean the toolhead, the feeder motor, or the nozzle depending on the string.
 - Reuse one template per recurring message shape (`Failed to connect to …`, `Are you sure you want to …?`), even where the English wording varies.

CMakeLists.txt

@@ -821,6 +821,37 @@ find_package(OpenSSL REQUIRED)
 find_package(CURL REQUIRED)
 find_package(Freetype REQUIRED)
 
+if (SLIC3R_GUI)
+    # LibDataChannel's installed export references its bundled dependencies,
+    # but does not install their CMake targets. Recreate those targets from
+    # the same dependency prefix before loading the LibDataChannel config.
+    if (NOT TARGET Usrsctp::usrsctp)
+        find_library(_ORCA_USRSCTP_LIBRARY NAMES usrsctp
+            PATHS "${CMAKE_PREFIX_PATH}/lib" NO_DEFAULT_PATH)
+        if (_ORCA_USRSCTP_LIBRARY)
+            add_library(Usrsctp::usrsctp UNKNOWN IMPORTED GLOBAL)
+            set_target_properties(Usrsctp::usrsctp PROPERTIES
+                IMPORTED_LOCATION "${_ORCA_USRSCTP_LIBRARY}"
+                IMPORTED_LINK_INTERFACE_LANGUAGES C
+                INTERFACE_LINK_LIBRARIES "Threads::Threads")
+        endif()
+    endif()
+
+    if (NOT TARGET LibJuice::LibJuice)
+        find_library(_ORCA_LIBJUICE_LIBRARY NAMES juice
+            PATHS "${CMAKE_PREFIX_PATH}/lib" NO_DEFAULT_PATH)
+        if (_ORCA_LIBJUICE_LIBRARY)
+            add_library(LibJuice::LibJuice UNKNOWN IMPORTED GLOBAL)
+            set_target_properties(LibJuice::LibJuice PROPERTIES
+                IMPORTED_LOCATION "${_ORCA_LIBJUICE_LIBRARY}"
+                IMPORTED_LINK_INTERFACE_LANGUAGES C
+                INTERFACE_LINK_LIBRARIES "Threads::Threads")
+        endif()
+    endif()
+
+    find_package(LibDataChannel CONFIG REQUIRED)
+endif()
+
 
 add_library(libcurl INTERFACE)
 target_link_libraries(libcurl INTERFACE CURL::libcurl)
@@ -1103,6 +1134,7 @@ function(orcaslicer_copy_dlls target config postfix output_dlls)
             ${CMAKE_PREFIX_PATH}/bin/occt/TKXDESTEP.dll
             ${CMAKE_PREFIX_PATH}/bin/occt/TKXSBase.dll
             ${CMAKE_PREFIX_PATH}/bin/freetype.dll
+            ${CMAKE_PREFIX_PATH}/bin/avformat-61.dll
             ${CMAKE_PREFIX_PATH}/bin/avcodec-61.dll
             ${CMAKE_PREFIX_PATH}/bin/swresample-5.dll
             ${CMAKE_PREFIX_PATH}/bin/swscale-8.dll
@@ -1142,6 +1174,7 @@ function(orcaslicer_copy_dlls target config postfix output_dlls)
         ${_out_dir}/TKXSBase.dll
 
         ${_out_dir}/freetype.dll
+        ${_out_dir}/avformat-61.dll
         ${_out_dir}/avcodec-61.dll
         ${_out_dir}/swresample-5.dll
         ${_out_dir}/swscale-8.dll
@@ -1164,7 +1197,10 @@ function(orcaslicer_copy_sos target config postfix output_sos)
         set(_out_dir "${CMAKE_CURRENT_BINARY_DIR}")
     endif ()
 
-    file(COPY ${CMAKE_PREFIX_PATH}/lib/libavcodec.so
+    file(COPY ${CMAKE_PREFIX_PATH}/lib/libavformat.so
+            ${CMAKE_PREFIX_PATH}/lib/libavformat.so.61
+            ${CMAKE_PREFIX_PATH}/lib/libavformat.so.61.1.100
+            ${CMAKE_PREFIX_PATH}/lib/libavcodec.so
             ${CMAKE_PREFIX_PATH}/lib/libavcodec.so.61
             ${CMAKE_PREFIX_PATH}/lib/libavcodec.so.61.3.100
             ${CMAKE_PREFIX_PATH}/lib/libavutil.so
@@ -1179,6 +1215,9 @@ function(orcaslicer_copy_sos target config postfix output_sos)
          DESTINATION ${_out_dir})
 
     set(${output_sos}
+        ${_out_dir}/libavformat.so
+        ${_out_dir}/libavformat.so.61
+        ${_out_dir}/libavformat.so.61.1.100
         ${_out_dir}/libavcodec.so
         ${_out_dir}/libavcodec.so.61
         ${_out_dir}/libavcodec.so.61.3.100
@@ -1308,6 +1347,8 @@ endif ()
 
 if (CMAKE_SYSTEM_NAME STREQUAL "Linux")
     set(LIBRARY_FILES
+    ${LIBDIR_BIN}/libavformat.so.61
+    ${LIBDIR_BIN}/libavformat.so.61.1.100
     ${LIBDIR_BIN}/libavcodec.so.61
     ${LIBDIR_BIN}/libavcodec.so.61.3.100
     ${LIBDIR_BIN}/libavutil.so.59

build_release.bat

@@ -1,52 +0,0 @@
-set WP=%CD%
-
-set debug=OFF
-set debuginfo=OFF
-if "%1"=="debug" set debug=ON
-if "%2"=="debug" set debug=ON
-if "%1"=="debuginfo" set debuginfo=ON
-if "%2"=="debuginfo" set debuginfo=ON
-if "%debug%"=="ON" (
-    set build_type=Debug
-    set build_dir=build-dbg
-) else (
-    if "%debuginfo%"=="ON" (
-        set build_type=RelWithDebInfo
-        set build_dir=build-dbginfo
-    ) else (
-        set build_type=Release
-        set build_dir=build
-    )
-)
-echo build type set to %build_type%
-
-cd deps
-mkdir %build_dir%
-cd %build_dir%
-set DEPS=%CD%/OrcaSlicer_dep
-set "SIG_FLAG="
-if defined ORCA_UPDATER_SIG_KEY set "SIG_FLAG=-DORCA_UPDATER_SIG_KEY=%ORCA_UPDATER_SIG_KEY%"
-if "%1"=="slicer" (
-    GOTO :slicer
-)
-echo "building deps.."
-
-echo cmake ../ -G "Visual Studio 16 2019" -A x64 -DCMAKE_BUILD_TYPE=%build_type%
-cmake ../ -G "Visual Studio 16 2019" -A x64 -DCMAKE_BUILD_TYPE=%build_type%
-cmake --build . --config %build_type% --target deps -- -m
-
-if "%1"=="deps" exit /b 0
-
-:slicer
-echo "building Orca Slicer..."
-cd %WP%
-mkdir %build_dir%
-cd %build_dir%
-
-echo cmake .. -G "Visual Studio 16 2019" -A x64 -DCMAKE_BUILD_TYPE=%build_type%
-cmake .. -G "Visual Studio 16 2019" -A x64 -DCMAKE_BUILD_TYPE=%build_type% %SIG_FLAG%
-cmake --build . --config %build_type% --target ALL_BUILD -- -m
-cd ..
-call scripts/run_gettext.bat
-cd %build_dir%
-cmake --build . --target install --config %build_type%

build_release_vs.bat

@@ -1,190 +0,0 @@
-@REM OrcaSlicer build script for Windows with VS auto-detect
-@echo off
-set WP=%CD%
-set _START_TIME=%TIME%
-
-@REM Default target architecture to the host CPU arch; override by passing
-@REM "x64" or "arm64" as an argument. PROCESSOR_ARCHITEW6432 covers a 32-bit
-@REM shell running on a 64-bit OS, where PROCESSOR_ARCHITECTURE reads "x86".
-set arch=x64
-if /I "%PROCESSOR_ARCHITECTURE%"=="ARM64" set arch=ARM64
-if /I "%PROCESSOR_ARCHITEW6432%"=="ARM64" set arch=ARM64
-if /I "%1"=="arm64" set arch=ARM64
-if /I "%2"=="arm64" set arch=ARM64
-if /I "%1"=="x64" set arch=x64
-if /I "%2"=="x64" set arch=x64
-
-@REM Check for Ninja Multi-Config option (-x)
-set USE_NINJA=0
-for %%a in (%*) do (
-    if "%%a"=="-x" set USE_NINJA=1
-)
-
-@REM Check for clang-cl option (-l). Combined with -x it also builds the deps with
-@REM clang-cl; on the Visual Studio generator it applies to the slicer only, because
-@REM the dependency sub-builds have no toolset to inherit and stay on MSVC.
-set CLANG_ARG=
-set TOOLSET_ARG=
-for %%a in (%*) do (
-    if "%%a"=="-l" (
-        set CLANG_ARG=-DCMAKE_C_COMPILER=clang-cl -DCMAKE_CXX_COMPILER=clang-cl
-        set TOOLSET_ARG=-T ClangCL
-    )
-)
-
-@REM Check for unit-tests option ("tests")
-set BUILD_TESTS=OFF
-for %%a in (%*) do (
-    if /I "%%a"=="tests" set BUILD_TESTS=ON
-)
-
-if "%USE_NINJA%"=="1" (
-    echo Using Ninja Multi-Config generator
-    set CMAKE_GENERATOR="Ninja Multi-Config"
-    set VS_VERSION=Ninja
-    goto :generator_ready
-)
-
-@REM Detect Visual Studio version using msbuild
-echo Detecting Visual Studio version using msbuild...
-
-@REM Try to get MSBuild version - the output format varies by VS version
-set VS_MAJOR=
-for /f "tokens=*" %%i in ('msbuild -version 2^>^&1 ^| findstr /r "^[0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*"') do (
-    for /f "tokens=1 delims=." %%a in ("%%i") do set VS_MAJOR=%%a
-    set MSBUILD_OUTPUT=%%i
-    goto :version_found
-)
-
-@REM Alternative method for newer MSBuild versions
-if "%VS_MAJOR%"=="" (
-    for /f "tokens=*" %%i in ('msbuild -version 2^>^&1 ^| findstr /r "[0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*"') do (
-        for /f "tokens=1 delims=." %%a in ("%%i") do set VS_MAJOR=%%a
-        set MSBUILD_OUTPUT=%%i
-        goto :version_found
-    )
-)
-
-:version_found
-echo MSBuild version detected: %MSBUILD_OUTPUT%
-echo Major version: %VS_MAJOR%
-
-if "%VS_MAJOR%"=="" (
-    echo Error: Could not determine Visual Studio version from msbuild
-    echo Please ensure Visual Studio and MSBuild are properly installed
-    exit /b 1
-)
-
-if "%VS_MAJOR%"=="16" (
-    set VS_VERSION=2019
-    set CMAKE_GENERATOR="Visual Studio 16 2019"
-) else if "%VS_MAJOR%"=="17" (
-    set VS_VERSION=2022
-    set CMAKE_GENERATOR="Visual Studio 17 2022"
-) else if "%VS_MAJOR%"=="18" (
-    set VS_VERSION=2026
-    set CMAKE_GENERATOR="Visual Studio 18 2026"
-) else (
-    echo Error: Unsupported Visual Studio version: %VS_MAJOR%
-    echo Supported versions: VS2019 (16.8+^), VS2022 (17.x^), VS2026 (18.x^)
-    exit /b 1
-)
-
-echo Detected Visual Studio %VS_VERSION% (version %VS_MAJOR%)
-echo Using CMake generator: %CMAKE_GENERATOR%
-
-:generator_ready
-
-@REM Pack deps
-if "%1"=="pack" (
-    setlocal ENABLEDELAYEDEXPANSION
-    cd %WP%/deps/build
-    if "%arch%"=="ARM64" cd %WP%/deps/build-arm64
-    for /f "tokens=2-4 delims=/ " %%a in ('date /t') do set build_date=%%c%%b%%a
-    echo packing deps: OrcaSlicer_dep_win-!arch!_!build_date!_vs!VS_VERSION!.zip
-
-    %WP%/tools/7z.exe a OrcaSlicer_dep_win-!arch!_!build_date!_vs!VS_VERSION!.zip OrcaSlicer_dep
-    goto :done
-)
-
-set debug=OFF
-set debuginfo=OFF
-if "%1"=="debug" set debug=ON
-if "%2"=="debug" set debug=ON
-if "%1"=="debuginfo" set debuginfo=ON
-if "%2"=="debuginfo" set debuginfo=ON
-if "%debug%"=="ON" (
-    set build_type=Debug
-    set build_dir=build-dbg
-) else (
-    if "%debuginfo%"=="ON" (
-        set build_type=RelWithDebInfo
-        set build_dir=build-dbginfo
-    ) else (
-        set build_type=Release
-        set build_dir=build
-    )
-)
-if "%arch%"=="ARM64" set build_dir=%build_dir%-arm64
-echo build type set to %build_type%, arch=%arch%
-
-setlocal DISABLEDELAYEDEXPANSION
-cd deps
-mkdir %build_dir%
-cd %build_dir%
-set "SIG_FLAG="
-if defined ORCA_UPDATER_SIG_KEY set "SIG_FLAG=-DORCA_UPDATER_SIG_KEY=%ORCA_UPDATER_SIG_KEY%"
-
-if "%1"=="slicer" (
-    GOTO :slicer
-)
-echo "building deps.."
-if defined CLANG_ARG if "%USE_NINJA%"=="0" echo Note: -l needs -x for the dependencies; building them with MSVC.
-
-echo on
-REM Set minimum CMake policy to avoid <3.5 errors
-set CMAKE_POLICY_VERSION_MINIMUM=3.5
-if "%USE_NINJA%"=="1" (
-    cmake ../ -G %CMAKE_GENERATOR% %CLANG_ARG% -DCMAKE_BUILD_TYPE=%build_type%
-    cmake --build . --config %build_type% --target deps
-) else (
-    cmake ../ -G %CMAKE_GENERATOR% -A %arch% -DCMAKE_BUILD_TYPE=%build_type%
-    cmake --build . --config %build_type% --target deps -- -m
-)
-@echo off
-
-if "%1"=="deps" goto :done
-
-:slicer
-echo "building Orca Slicer..."
-cd %WP%
-mkdir %build_dir%
-cd %build_dir%
-
-echo on
-set CMAKE_POLICY_VERSION_MINIMUM=3.5
-if "%USE_NINJA%"=="1" (
-    cmake .. -G %CMAKE_GENERATOR% %CLANG_ARG% -DORCA_TOOLS=ON %SIG_FLAG% -DBUILD_TESTS=%BUILD_TESTS% -DCMAKE_BUILD_TYPE=%build_type%
-    cmake --build . --config %build_type% --target all
-) else (
-    cmake .. -G %CMAKE_GENERATOR% -A %arch% %TOOLSET_ARG% -DORCA_TOOLS=ON %SIG_FLAG% -DBUILD_TESTS=%BUILD_TESTS% -DCMAKE_BUILD_TYPE=%build_type%
-    cmake --build . --config %build_type% --target ALL_BUILD -- -m
-)
-@echo off
-cd ..
-call scripts/run_gettext.bat
-cd %build_dir%
-cmake --build . --target install --config %build_type%
-
-:done
-@echo off
-for /f "tokens=1-3 delims=:.," %%a in ("%_START_TIME: =0%") do set /a "_start_s=%%a*3600+%%b*60+%%c"
-for /f "tokens=1-3 delims=:.," %%a in ("%TIME: =0%") do set /a "_end_s=%%a*3600+%%b*60+%%c"
-set /a "_elapsed=_end_s - _start_s"
-if %_elapsed% lss 0 set /a "_elapsed+=86400"
-set /a "_hours=_elapsed / 3600"
-set /a "_remainder=_elapsed - _hours * 3600"
-set /a "_mins=_remainder / 60"
-set /a "_secs=_remainder - _mins * 60"
-echo.
-echo Build completed in %_hours%h %_mins%m %_secs%s

build_release_vs2022.bat

@@ -1,80 +0,0 @@
-@REM OrcaSlicer build script for Windows
-@echo off
-set WP=%CD%
-
-@REM Pack deps
-if "%1"=="pack" (
-    setlocal ENABLEDELAYEDEXPANSION 
-    cd %WP%/deps/build
-    for /f "tokens=2-4 delims=/ " %%a in ('date /t') do set build_date=%%c%%b%%a
-    echo packing deps: OrcaSlicer_dep_win64_!build_date!_vs2022.zip
-
-    %WP%/tools/7z.exe a OrcaSlicer_dep_win64_!build_date!_vs2022.zip OrcaSlicer_dep
-    exit /b 0
-)
-
-set debug=OFF
-set debuginfo=OFF
-@REM Default target architecture to the host CPU arch; override with x64/arm64 arg.
-set arch=x64
-if /I "%PROCESSOR_ARCHITECTURE%"=="ARM64" set arch=ARM64
-if /I "%PROCESSOR_ARCHITEW6432%"=="ARM64" set arch=ARM64
-if "%1"=="debug" set debug=ON
-if "%2"=="debug" set debug=ON
-if "%1"=="debuginfo" set debuginfo=ON
-if "%2"=="debuginfo" set debuginfo=ON
-if /I "%1"=="arm64" set arch=ARM64
-if /I "%2"=="arm64" set arch=ARM64
-if /I "%1"=="x64" set arch=x64
-if /I "%2"=="x64" set arch=x64
-if "%debug%"=="ON" (
-    set build_type=Debug
-    set build_dir=build-dbg
-) else (
-    if "%debuginfo%"=="ON" (
-        set build_type=RelWithDebInfo
-        set build_dir=build-dbginfo
-    ) else (
-        set build_type=Release
-        set build_dir=build
-    )
-)
-if "%arch%"=="ARM64" set build_dir=%build_dir%-arm64
-echo build type set to %build_type%, arch=%arch%
-
-setlocal DISABLEDELAYEDEXPANSION 
-cd deps
-mkdir %build_dir%
-cd %build_dir%
-set "SIG_FLAG="
-if defined ORCA_UPDATER_SIG_KEY set "SIG_FLAG=-DORCA_UPDATER_SIG_KEY=%ORCA_UPDATER_SIG_KEY%"
-
-if "%1"=="slicer" (
-    GOTO :slicer
-)
-echo "building deps.."
-
-echo on
-REM Set minimum CMake policy to avoid <3.5 errors
-set CMAKE_POLICY_VERSION_MINIMUM=3.5
-cmake ../ -G "Visual Studio 17 2022" -A %arch% -DCMAKE_BUILD_TYPE=%build_type%
-cmake --build . --config %build_type% --target deps -- -m
-@echo off
-
-if "%1"=="deps" exit /b 0
-
-:slicer
-echo "building Orca Slicer..."
-cd %WP%
-mkdir %build_dir%
-cd %build_dir%
-
-echo on
-set CMAKE_POLICY_VERSION_MINIMUM=3.5
-cmake .. -G "Visual Studio 17 2022" -A %arch% -DORCA_TOOLS=ON %SIG_FLAG% -DCMAKE_BUILD_TYPE=%build_type%
-cmake --build . --config %build_type% --target ALL_BUILD -- -m
-@echo off
-cd ..
-call scripts/run_gettext.bat
-cd %build_dir%
-cmake --build . --target install --config %build_type%

deps/CMakeLists.txt

@@ -375,10 +375,6 @@ include(libnoise/libnoise.cmake)
 
 include(Draco/Draco.cmake)
 
-include(FFMPEG/FFMPEG.cmake)
-include(Assimp/Assimp.cmake)
-
-
 # I *think* 1.1 is used for *just* md5 hashing?
 # 3.1 has everything in the right place, but the md5 funcs used are deprecated
 # a grep across the repo shows it is used for other things
@@ -389,6 +385,12 @@ if(NOT OPENSSL_FOUND)
     set(OPENSSL_PKG dep_OpenSSL)
 endif()
 
+include(FFMPEG/FFMPEG.cmake)
+include(Assimp/Assimp.cmake)
+
+include(DataChannel/DataChannel.cmake)
+set(DATACHANNEL_PKG dep_DataChannel)
+
 # we don't want to load a "wrong" openssl when loading curl
 # so, just don't even bother
 # ...i think this is how it works? change if wrong
@@ -461,6 +463,7 @@ set(_dep_list
     dep_wxInspector
     dep_FFMPEG
     dep_Assimp
+    ${DATACHANNEL_PKG}
     )
 
 if (MSVC)

deps/DataChannel/DataChannel.cmake

@@ -0,0 +1,20 @@
+# libdatachannel is the native ICE/DTLS/SCTP implementation used by the
+# GUI WebRTC camera controller. Keep the source revision fixed: the signaling
+# protocol is evolving independently of this transport dependency.
+orcaslicer_add_cmake_project(DataChannel
+    DEPENDS ${OPENSSL_PKG}
+    CMAKE_ARGS
+        -DNO_EXAMPLES=ON
+        -DNO_TESTS=ON
+        -DNO_WEBSOCKET=ON
+        -DNO_MEDIA=ON
+        -DUSE_NICE=OFF
+        -DUSE_SYSTEM_JUICE=OFF
+        -DUSE_SYSTEM_USRSCTP=OFF
+        -DOPENSSL_ROOT_DIR:PATH=${DESTDIR}
+        -DOPENSSL_USE_STATIC_LIBS=ON
+    GIT_REPOSITORY https://github.com/paullouisageneau/libdatachannel.git
+    GIT_TAG v0.22.2
+    GIT_SHALLOW ON
+    GIT_SUBMODULES_RECURSE ON
+)

deps/FFMPEG/FFMPEG.cmake

@@ -1,5 +1,16 @@
 set(_conf_cmd ./configure)
 
+set(_ffmpeg_depends)
+set(_ffmpeg_configure_command ${_conf_cmd})
+if (TARGET dep_OpenSSL)
+    set(_ffmpeg_depends DEPENDS dep_OpenSSL)
+    set(_ffmpeg_configure_command
+        ${CMAKE_COMMAND} -E env
+        "PKG_CONFIG_PATH=${DESTDIR}/lib/pkgconfig:$ENV{PKG_CONFIG_PATH}"
+        ${_conf_cmd}
+    )
+endif()
+
 if (MSVC)
     set(_source_dir "${CMAKE_BINARY_DIR}/dep_FFMPEG-prefix/src/dep_FFMPEG")
 
@@ -9,6 +20,7 @@ if (MSVC)
     set(PREBUILD_HASH_x64 "e65916020ddb9ef84b2666dfbcbfc9b1d67f69d15b4a66db53754637bf2d498c")
 
     ExternalProject_Add(dep_FFMPEG
+        ${_ffmpeg_depends}
         URL ${PREBUILD_URL_${DEPS_ARCH}}
         URL_HASH SHA256=${PREBUILD_HASH_${DEPS_ARCH}}
         DOWNLOAD_DIR ${DEP_DOWNLOAD_DIR}/FFMPEG
@@ -21,6 +33,8 @@ if (MSVC)
     )
 
 else ()
+    set(_openssl_cmd --enable-openssl)
+
     if (APPLE)
         set(_minos_cmd
             "--extra-cflags=-mmacosx-version-min=${DEP_OSX_TARGET}"
@@ -52,10 +66,11 @@ else ()
     endif()
 
     ExternalProject_Add(dep_FFMPEG
+        ${_ffmpeg_depends}
         URL https://github.com/FFmpeg/FFmpeg/archive/refs/tags/n7.0.3.tar.gz
         URL_HASH SHA256=DEEDCABE339165214A3637DF4C86A507AEF0D793CF8774FF68735F4737E8DDBC
         DOWNLOAD_DIR ${DEP_DOWNLOAD_DIR}/FFMPEG
-        CONFIGURE_COMMAND ${_conf_cmd}
+        CONFIGURE_COMMAND ${_ffmpeg_configure_command}
             ${_cross_cmd}
             ${_pic_cmd}
             ${_arch_cmd}
@@ -63,20 +78,21 @@ else ()
             "--prefix=${DESTDIR}"
             ${_link_cmd}
             ${_minos_cmd}
+            ${_openssl_cmd}
             --disable-doc
             --enable-small
             --disable-outdevs
             --disable-filters
             --enable-filter=*null*,afade,*fifo,*format,*resample,aeval,allrgb,allyuv,atempo,pan,*bars,color,*key,crop,draw*,eq*,framerate,*_qsv,*_vaapi,*v4l2*,hw*,scale,volume,test*
             --disable-protocols
-            --enable-protocol=file,fd,pipe,rtp,udp
+            --enable-protocol=file,fd,pipe,http,https,rtp,tcp,udp
             --disable-muxers
             --enable-muxer=rtp
             --disable-encoders
             --disable-decoders
             --enable-decoder=*aac*,h264*,mp3*,mjpeg,rv*
             --disable-demuxers
-            --enable-demuxer=h264,mp3,mov
+            --enable-demuxer=h264,mp3,mov,mpjpeg,rtsp,sdp
             --disable-zlib
             --disable-avdevice
         BUILD_IN_SOURCE ON

deps/python3/arm64-unicodectype.props

@@ -0,0 +1,12 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Compiles Objects/unicodectype.c without optimisation. VS 2026's ARM64 code
+     generator needs about 27 GB for _PyUnicode_ToNumeric, a switch with 1951
+     cases. CPython has the same workaround (python/cpython#153668). -->
+<Project xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <ItemGroup>
+    <ClCompile Update="..\Objects\unicodectype.c">
+      <Optimization>Disabled</Optimization>
+      <WholeProgramOptimization>false</WholeProgramOptimization>
+    </ClCompile>
+  </ItemGroup>
+</Project>

deps/python3/python3.cmake

@@ -88,8 +88,18 @@ if(WIN32)
         list(APPEND _python_env_args "PreferredToolArchitecture=${_python_tool_arch}")
     endif()
 
+    # MSBuild reads extra switches from PCbuild/msbuild.rsp.
+    set(_python_rsp "/p:PlatformToolset=${_python_platform_toolset}\n")
+    # VS 2026's ARM64 code generator needs about 27 GB for one function in
+    # Objects/unicodectype.c (python/cpython#153668); the property sheet compiles
+    # that file without optimisation.
+    if(_python_pcbuild_platform STREQUAL "ARM64")
+        file(TO_NATIVE_PATH "${CMAKE_CURRENT_LIST_DIR}/arm64-unicodectype.props" _python_arm64_props)
+        string(APPEND _python_rsp "/p:ForceImportAfterCppTargets=\"${_python_arm64_props}\"\n")
+    endif()
+    file(WRITE "${CMAKE_CURRENT_BINARY_DIR}/python3-msbuild.rsp" "${_python_rsp}")
     set(_conf_cmd
-        cmd /c "echo /p:PlatformToolset=${_python_platform_toolset}>PCbuild\\msbuild.rsp"
+        ${CMAKE_COMMAND} -E copy "${CMAKE_CURRENT_BINARY_DIR}/python3-msbuild.rsp" <SOURCE_DIR>/PCbuild/msbuild.rsp
     )
     set(_build_cmd
         ${CMAKE_COMMAND} -E env ${_python_env_args}

docs/HLSD/filament_id.md

@@ -9,7 +9,7 @@ OrcaFilamentLibrary (OFL), Qidi, or Snapmaker bundle. The granularity is the nam
 not the brand behind it: `AAA PLA Lite` and `AAA PLA Pro` are two filaments with two ids, not
 variants of one.
 
-**How it is generated:** an id is computed, never invented. `scripts/orca_id_tool.py`
+**How it is generated:** an id is computed, never invented. `scripts/orca_profile_tool.py`
 mints it as a deterministic hash of the product's identity — the triple
 `(filament_vendor, filament_type, filament name)`, where the filament name is the preset name
 with its `@...` variant suffix stripped — producing an 8-character `OF*` code that is the
@@ -34,7 +34,7 @@ This page is the rule for authoring `filament_id` in system profiles
 
 > [!IMPORTANT]
 > **Never write a `filament_id` value by hand.** A new filament gets its id from
-> `python scripts/orca_id_tool.py --generate`; one already in the tree has one — inherit it.
+> `python scripts/orca_profile_tool.py generate-id`; one already in the tree has one — inherit it.
 
 ## The design, in two pieces
 
@@ -160,8 +160,8 @@ key needed). Tuning a generic material → **join the OrcaFilamentLibrary filame
    different product by rule 5, so it then needs its own id.
 5. **Ids follow the product identity.** The id is a pure function of the product triple
    `(filament_vendor, filament_type, filament name)`, so correcting any of them re-mints the id
-   **by design**, applied by `--generate` (preview with `--dry-run`, confine with `--vendor`) and
-   gated by the `--update-snapshot` diff; the exact sequence is in the FAQ. Nothing forwards
+   **by design**, applied by `generate-id` (preview with `--dry-run`, confine with `--vendor`)
+   and gated by the `update-snapshot` diff; the exact sequence is in the FAQ. Nothing forwards
    the old value, so anything outside the tree that stored it — a device tray, a calibration
    record, a saved project — falls back to matching by filament type until the user re-selects
    the filament. Re-mint deliberately, and only to fix a genuinely wrong identity.
@@ -170,7 +170,7 @@ key needed). Tuning a generic material → **join the OrcaFilamentLibrary filame
 ## Minting — nobody invents ids
 
 New ids are deterministic, computed exactly like the `setting_id` precedent
-(the `setting_id` half of `scripts/orca_id_tool.py`):
+(the `setting_id` half of `scripts/orca_profile_tool.py generate-id`):
 
 ```text
 FILAMENT_ID_NAMESPACE = uuid5(setting-id NAMESPACE, "filament_id")
@@ -199,10 +199,10 @@ purely through inheritance from the OFL preset.
 Nothing but the triple feeds the mint — not the rest of the tree, not the snapshot, not what
 another preset of the product happens to carry. Determined triple, determined id: one product
 carries one id and there is no second acceptable value for it, so any other value on a preset
-is a mismatch `--check` reports and `--generate` pulls back. Two *different* products whose
+is a mismatch `check` reports and `generate-id` pulls back. Two *different* products whose
 triples mint the same base62 value would be a collision (a roughly 36-bit id space against a
-few thousand products); nothing salts past it: `--check` reports it naming both products,
-`--generate` refuses to write it, and the remedy is a rename so their triples differ. Where
+few thousand products); nothing salts past it: `check` reports it naming both products,
+`generate-id` refuses to write it, and the remedy is a rename so their triples differ. Where
 two presets of one product would be AMS-ambiguous on a printer, the fix is likewise in the
 profiles — make their `compatible_printers` disjoint (structure rule 3), retire the redundant
 preset, or, if they really are different products, give them different names so their triples
@@ -212,15 +212,14 @@ Workflow for a new filament:
 
 ```bash
 # 1. Author the filament with NO filament_id key anywhere.
-python scripts/orca_id_tool.py --dry-run          # 2. preview the ids — writes nothing
-python scripts/orca_id_tool.py --generate         # 3. apply them to the profile file(s)
-python scripts/orca_id_tool.py --update-snapshot  # 4. record the new claims in the snapshot
-python scripts/orca_id_tool.py --check            # 5. validate the filament_id state
-python scripts/orca_extra_profile_check.py        # 6. ...and everything else CI checks
-# 7. Commit the profile edits together with scripts/filament_id_snapshot.json, for review.
+python scripts/orca_profile_tool.py generate-id --dry-run  # 2. preview the ids — writes nothing
+python scripts/orca_profile_tool.py generate-id           # 3. apply them to the profile file(s)
+python scripts/orca_profile_tool.py update-snapshot       # 4. record the new claims in the snapshot
+python scripts/orca_profile_tool.py check                 # 5. validate — everything CI checks
+# 6. Commit the profile edits together with scripts/filament_id_snapshot.json, for review.
 ```
 
-`--generate` makes every filament's id equal the mint of its own
+`generate-id` makes every filament's id equal the mint of its own
 `(filament_vendor, filament_type, filament name)` triple: it inserts one where an instantiated
 filament resolves none, and re-derives one that does not match. A preset that *inherits* a
 mismatching id is the one case left to the author — check 3b names it, and the fix is to inherit
@@ -232,60 +231,63 @@ and machine preset of every vendor except BBL, which keeps its authoritative `G*
 `setting_id` from base profiles, and fixes the misspelled `settings_id` key — dropped, or, for
 BBL, whose ids have no formula to fall back on, restored under the correct name. It is idempotent and
 byte-preserving (indentation, BOM, and line endings intact, every edited file re-parsed to fail
-loudly), and a no-op on a tree that already passes `scripts/orca_extra_profile_check.py` — the
-check CI runs over both id kinds, of which `--check` is the `filament_id` half.
+loudly), and a no-op on a tree that already passes `check`.
 
 - `--filament-id` limits the run to `filament_id`.
 - `--setting-id` limits the run to `setting_id`. The two exclude each other; pass neither to
   write both.
 - `--vendor VENDOR` confines the run to that bundle; repeatable. The id is a function of the
-  triple alone, so a narrowed run writes exactly what a full one would; `--check` reports
+  triple alone, so a narrowed run writes exactly what a full one would; `check` reports
   whatever it left outside.
-- `--dry-run` reports what `--generate` would do and writes nothing; with no mode of its own it
-  implies `--generate`, so `--dry-run --vendor <Vendor>` previews just that bundle.
+- `--dry-run` reports what the run would do and writes nothing, so
+  `generate-id --dry-run --vendor <Vendor>` previews just that bundle.
 - `--profiles DIR` points the tooling at a different profile tree (default
-  `resources/profiles`). `--check` and `--update-snapshot` read and write the sanctioned state of
+  `resources/profiles`). `check` and `update-snapshot` read and write the sanctioned state of
   the tree they are given, so pointing them elsewhere needs `--snapshot PATH` for that tree too —
   `scripts/filament_id_snapshot.json` describes `resources/profiles` and no other tree.
 
-**Identity fixes need no separate mode.** `--generate` re-derives an id that no longer matches its
-triple exactly the way it fills in a missing one, so a rename or a `filament_vendor` /
-`filament_type` correction is just: fix the config, run `--generate` (confine it with `--vendor`,
-preview it with `--dry-run`), then `--update-snapshot` and review the diff.
+The tool's other commands maintain the tree around the ids: `fix` normalises profile files,
+`trim` drops files no `<vendor>.json` list references, and `update-index` rebuilds those lists.
+They do not touch ids; `--help` documents them.
+
+**Identity fixes need no separate command.** `generate-id` re-derives an id that no longer matches
+its triple exactly the way it fills in a missing one, so a rename or a `filament_vendor` /
+`filament_type` correction is just: fix the config, run `generate-id` (confine it with
+`--vendor`, preview it with `--dry-run`), then `update-snapshot` and review the diff.
 
 If you skip the tooling, CI fails and prints the remedy: the expected id for your filament and
-the instruction to run `python scripts/orca_id_tool.py --generate`; once the id is minted, the
-snapshot checks likewise point at `--update-snapshot` and tell you to commit the resulting
+the instruction to run `python scripts/orca_profile_tool.py generate-id`; once the id is minted,
+the snapshot checks likewise point at `update-snapshot` and tell you to commit the resulting
 diff.
 
-## Reserved namespaces — never mint or hand-write into
+## Ids other systems compose
 
-A **reserved namespace** is an id space no system profile may declare, because an external
-catalog or a device protocol owns the values. None of them has an owning vendor: there is no
-bundle — not even the one whose printers use the catalog — that may write one into a profile.
+Every filament profile carries a minted id, with no exceptions and no spellings held back for
+anyone. There is therefore no reserved namespace to respect and no bundle that owns one: an id
+some other system composes for its own purposes is simply not the mint of a triple, so it
+cannot be a system profile's `filament_id`, and the format check rejects it for that reason
+alone — same error, same remedy, whoever wrote it.
 
-| Space | Status | Rule |
-| --- | --- | --- |
-| `GF*` | Bambu AMS/RFID catalog | declarable by **nobody**, BBL included: Bambu's own ids live in the generated catalog map, never in a profile |
-| `QD_*` | Qidi device protocol | declarable by **nobody**, Qidi included: the box composes these ids at runtime and they are not preset ids |
-| `P` + 7 hex chars (case-insensitive), `"null"` | user-created custom filaments (`CreatePresetsDialog.cpp`) | never appears in system profiles |
+Three such spaces exist around us, and are worth recognising so nobody mistakes one for an id
+to copy into a profile:
 
-The two device namespaces, in detail:
-
-- **Bambu (`GF*`).** Bambu's device/RFID/cloud catalog is external and opaque, which is a
-  reason to keep it out of the profiles rather than to let one bundle own it. Every BBL filament
-  mints an `OF` id from its triple like every other vendor's, and the correspondence to Bambu's
-  catalog ids lives in one generated file the app applies at the printer boundary — the next
-  section. Nothing under `resources/profiles/**` carries a `GF*` id today and nothing can be
-  exempted, so a `GF*` id appearing anywhere in the tree is a mistake, whoever wrote it.
-- **Qidi (`QD_*`).** `QD_*` is a device-*protocol* namespace, not a preset id space: the
-  Qidi box path composes `QD_<series>_<vendor>_<typeidx>` ids at runtime (slot vendor and
-  type indices reported by the device, the series digit inferred client-side from the printer
-  model/name). Qidi presets carry ordinary minted `OF*` ids (generics share the OFL ids), so
-  a composed id matches no preset and the slot falls back to filament type; translating it to
-  the filament's id belongs in `QidiPrinterAgent`. The alternative — treating per-series
-  protocol ids as preset ids — would put one product under five ids (`QIDI PLA Rapido` would
-  be `QD_0_1_1` through `QD_4_1_1`), exactly the fragmentation the mint rule removes.
+- **Bambu's `GF*` catalog.** Bambu's device / RFID / cloud catalog is external and opaque. Every
+  BBL filament mints an `OF` id from its triple like every other vendor's, and the
+  correspondence to Bambu's catalog ids lives in one generated file the app applies at the
+  printer boundary — the next section. Note that `GF` is a *prefix*, not a namespace the tree
+  avoids: BBL's authoritative `setting_id` values include `GF`-prefixed ones, and
+  `resources/profiles/blacklist.json` and `BBL/filament/filaments_color_codes.json` both
+  reference Bambu catalog ids by design. The rule is about `filament_id` and nothing else.
+- **Qidi's `QD_*` protocol ids.** The Qidi box composes `QD_<series>_<vendor>_<typeidx>` at
+  runtime (slot vendor and type indices reported by the device, the series digit inferred
+  client-side from the printer model/name). Qidi presets carry ordinary minted `OF*` ids
+  (generics share the OFL ids), so a composed id matches no preset and the slot falls back to
+  filament type; translating it to the filament's id belongs in `QidiPrinterAgent`. Treating
+  per-series protocol ids as preset ids would put one product under five ids
+  (`QIDI PLA Rapido` would be `QD_0_1_1` through `QD_4_1_1`) — exactly the fragmentation the
+  mint rule removes.
+- **`P` + 7 hex chars, and `"null"`.** What `CreatePresetsDialog.cpp` gives a filament a *user*
+  creates. Those are user presets, not system profiles, and the two never meet in the tree.
 
 ## The Bambu catalog map
 
@@ -337,7 +339,7 @@ OrcaFilamentLibrary. **135 is the number to expect at every regeneration** — 1
 one-off size of the transition and stopped being computable from the tree once the BBL bundle
 was re-minted, so do not "fix" the report to print it.
 
-**Check 6** lives in `check_filament_ids`, so profile CI runs it alongside the other five. It
+**Check 5** lives in `check_filament_ids`, so profile CI runs it alongside the other four. It
 holds the file to its contract: it parses, carries `source` / `bambustudio_commit` /
 `generated`, keys only `OF`-format ids, maps each Bambu id at most once, and — for every row
 whose key the tree actually claims — agrees with the tree on that id's `(vendor, type, name)`
@@ -426,11 +428,11 @@ map would silently reproduce the bug.
 ## How CI enforces this
 
 Profile CI (`check_profiles.yml`) runs `check_filament_ids()` tree-wide via
-`scripts/orca_extra_profile_check.py`. Its ground truth is
+`scripts/orca_profile_tool.py check`. Its ground truth is
 **`scripts/filament_id_snapshot.json` — the sanctioned state**: the id state derived from the
 tree must equal the snapshot exactly, in both directions. Any change to the id landscape
 therefore surfaces as a diff to that file, and **that snapshot diff is what maintainers review
-and gate in a PR**. Never edit the snapshot by hand — `--update-snapshot` regenerates it
+and gate in a PR**. Never edit the snapshot by hand — `update-snapshot` regenerates it
 deterministically (running it twice changes nothing). The snapshot holds one map, `ids`: each
 entry is the product the id is minted from (`filament_vendor`, `filament_type`, `name`) and the
 `filaments` claiming it (`Vendor/Filament`), and it sanctions *state*, never exceptions: no check
@@ -450,8 +452,6 @@ The checks, in brief:
   system filament must resolve an effective id at all (recall: an id-less one is a hard load
   error in C++ that discards the whole vendor bundle); and no two products mint one id (a
   base62 collision, resolved by renaming one of them). The errors print the expected id.
-- **Reserved namespaces** — `GF*`, `QD_*`, `P<7-hex>` or `"null"` claimed by any vendor,
-  BBL and Qidi included.
 - **Triple integrity** — every declarer must resolve a non-empty `filament_vendor` and
   `filament_type` (generics use `"Generic"`), and all declarers of one filament within a
   bundle must agree on the triple.
@@ -461,16 +461,15 @@ The checks, in brief:
   tree claims. See [The Bambu catalog map](#the-bambu-catalog-map); the remedy is always to
   regenerate, never to hand-edit.
 
-A profile that declares a **reserved-namespace** id — `GF*`, `QD_*` or `P<7-hex>`, whatever
-its vendor — cannot pass the format check, so `--update-snapshot` refuses to sanction it
-rather than hide the mistake until CI. For a Bambu-cataloged product, the catalog map is where
-the correspondence belongs. Any other new sharing via a *declared* id is caught by the identity
-check; sharing through inheritance carries no declaration to check and surfaces only as a new
-claim in the snapshot diff — which is exactly why that diff is the gate.
+A profile that declares an id no triple mints — a Bambu catalog id, a composed Qidi one, a
+hand-typed value, whatever its vendor — fails the format check. For a Bambu-cataloged product
+the catalog map is where the correspondence belongs. New sharing via a *declared* id is caught
+by the identity check; sharing through inheritance carries no declaration to check and surfaces
+only as a new claim in the snapshot diff — which is exactly why that diff is the gate.
 
-`orca_extra_profile_check.py` separately holds every declared id to the AMS 8-character limit,
-tree-wide and for every vendor alike, scoped to the presets a vendor's index actually
-references (a file the index never loads cannot break AMS matching).
+The same `check` run holds every declared id to the AMS 8-character limit, tree-wide and for
+every vendor alike, scoped to the presets a vendor's index actually references (a file the index
+never loads cannot break AMS matching).
 
 Complementing the Python checks, CI also runs the C++ profile validator with `-f`
 (`check_filament_subtypes`): it loads the bundle exactly as the app does and flags any printer
@@ -488,21 +487,21 @@ ambiguity check behind structure rule 3.
   `Generic PLA` base name, set `compatible_printers`; no id key needed.
 - **A branded filament that borrows a generic's settings?** Fine — inherit `Generic X @System`
   (or any real filament) for the settings and declare the id of your own filament; run
-  `python scripts/orca_id_tool.py --generate` to mint it. Inheritance never changes the id.
+  `python scripts/orca_profile_tool.py generate-id` to mint it. Inheritance never changes the id.
 - **I need to fix a filament's `filament_vendor` or `filament_type`.** Fix the config, run
-  `--generate --vendor <Vendor>` (preview with `--dry-run`), then `--update-snapshot`, and commit
+  `generate-id --vendor <Vendor>` (preview with `--dry-run`), then `update-snapshot`, and commit
   the profile and snapshot diffs together. The id re-derives from the corrected identity, and
   nothing forwards the old value, so a tray or record still holding it falls back to matching by
   filament type.
 - **I need to rename a filament.** Rename the presets (adding `renamed_from`, which keeps the
-  preset *name* resolving), then `--generate --vendor <Vendor>` (preview with `--dry-run`), then
-  `--update-snapshot`. The id follows the new filament name; as with any identity fix, the old id
+  preset *name* resolving), then `generate-id --vendor <Vendor>` (preview with `--dry-run`), then
+  `update-snapshot`. The id follows the new filament name; as with any identity fix, the old id
   is not forwarded.
-- **Can I reuse a `QD_*` id for a Qidi profile?** No — nobody can. It is the device protocol's
-  own id space: the box composes those values at runtime and no preset carries one. Author
-  Qidi filaments like any other vendor's.
-- **CI says my filament needs an id.** Run `python scripts/orca_id_tool.py --generate`, then
-  `--update-snapshot`, and commit both diffs. Do not type an id by hand.
+- **Can I reuse a `QD_*` id for a Qidi profile?** No — it is not a mint, so it is not a
+  `filament_id`. Those values are composed by the box at runtime, and no preset carries one.
+  Author Qidi filaments like any other vendor's.
+- **CI says my filament needs an id.** Run `python scripts/orca_profile_tool.py generate-id`, then
+  `update-snapshot`, and commit both diffs. Do not type an id by hand.
 
 For general profile authoring, see the profile development guide on the
 [OrcaSlicer wiki](https://www.orcaslicer.com/wiki).

docs/HLSD/wipe-inward.md

@@ -0,0 +1,170 @@
+# Wipe inward — High Level Design
+
+## Purpose and scope
+
+Wipe inward reduces reheating of fresh plastic and visible seam artifacts by
+moving the hot nozzle toward adjacent printed material during the external-wall
+wipe. Wipe marks are especially visible at layer heights below 0.1 mm.
+The option applies only to wipes after external walls, including walls around
+holes. It does not offset wipes after inner walls, infill or supports. For an
+outer contour the move is inward; for a hole it is away from the hole, toward
+the surrounding material. The path must remain supported by material that is
+already present when the wipe executes.
+
+The operation belongs to G-code generation. It uses extrusion paths, their actual
+widths and their print order. Changing its settings invalidates G-code export
+while preserving the sliced geometry.
+
+## Settings and eligibility
+
+`wipe_inward` defaults to disabled and requires Wipe while retracting to be
+enabled for the active filament. `wipe_inward_distance` defaults to 50% of the
+actual external-wall extrusion width; it also accepts an absolute distance in
+millimeters. Using the path width makes Auto width and Arachne's variable widths
+meaningful. The effective offset is limited by that width and the spacing to the
+adjacent wall. A zero distance disables the offset.
+
+Only external perimeters with a suitable, previously printed inner perimeter
+are eligible. A configured wall count alone cannot establish eligibility:
+the local geometry may contain fewer walls, and walls scheduled later do not
+provide support. Outer/Inner wall order therefore normally retains the regular
+wipe path.
+
+Retraction and pressure advance calibrations disable inward wiping so it cannot
+mask the behavior being measured. The calibration settings turn it off, and
+G-code generation enforces this even if a profile or object override enables it.
+
+## Path selection and support
+
+The planner identifies an adjacent inner perimeter on the material side of the
+outgoing wall. Contour winding and the distinction between outer contours and
+holes establish a preferred direction; local printed geometry resolves ambiguous
+or self-touching contours.
+
+Candidate paths offset or translate the portion needed for the configured wipe
+distance. A wide seam gap can prevent a supported forward path; following the
+incoming printed wall backwards is also a candidate. If translating that wall
+cannot provide a complete wipe around a curve, the planner tries an offset of
+the reversed wall. Direction checks allow coordinate-rounding error at a
+perpendicular entry, while rejecting actual backtracking. The planner checks the
+complete executable path, including its connector from the nozzle position,
+against the current and earlier printed perimeters. Nearby endpoints alone do
+not establish support across a gap.
+
+Each region accumulates its printed perimeter prefix once, in extrusion order.
+Every entity contributes its geometry only after it is printed, and the prefix
+is discarded when the region ends. This collection is skipped when inward wiping
+is disabled or its configured distance is zero. A mixed inner-wall loop remains
+an eligible target even when its first path is an overhang: ordinary inner-wall
+paths elsewhere in the loop identify it. Likewise, an external loop with an
+overhanging start remains eligible when other segments identify the external
+wall. It is available for support checks but is not an inner-wall target.
+Candidate-specific support filtering and AABB trees are built only for eligible
+external loops, then reused across their candidate paths.
+
+Material-side validation applies with or without a seam gap. Along each
+candidate, local wall normals point toward the adjacent printed inner wall;
+samples on the opposite side are rejected even when they remain close enough
+to the external wall to pass the support check. This uses the open wall geometry
+without treating it as a closed polygon. Full paths at a zero-gap seam also
+retain clearance from the external wall after their initial connector. At a
+clipped corner, another branch can be closer than the requested offset, so
+material-side and support checks apply without that additional clearance rule.
+
+An accepted candidate replaces the stored wipe path as a whole. A short direct
+inward move is also eligible when longer candidates fail validation. It may
+waive full wall clearance, but must pass the material-side check. Its initial
+direction is checked from the actual nozzle position after any loop pre-move;
+the original wall endpoint is retained separately for intersection checks. It takes
+priority over the alternate offset when the preferred and translated paths
+are unusable. A longer reversed path may replace the selected candidate only
+when its distance to the target inner wall is no worse within tolerance.
+
+## Fallback to the regular wipe
+
+The original wipe path is retained when:
+
+- No suitable adjacent inner wall has already been printed near the seam. This
+  includes single-wall areas, locally missing inner walls and normally Outer/Inner
+  wall order. A distant wall or a wall on the air side does not qualify.
+- The requested or available offset, or the configured wipe distance, is zero
+  or too small at the geometry's coordinate precision.
+- Degenerate geometry prevents construction of a usable candidate, or all
+  candidates fail the checks for printed support, direction, wall clearance or
+  the connector from the actual nozzle position. This can occur at tight corners,
+  narrow features or seam gaps.
+
+Corners and seam gaps do not automatically trigger fallback: an offset,
+translated, reversed or short direct inward path may still be valid. The regular
+wipe is retained only when no candidate is accepted.
+
+Fallback uses the path and retraction rules for `wipe_inward` disabled.
+Wipe while retracting must still be enabled for a wipe to occur; `wipe_on_loops`
+remains controlled by its own setting.
+
+## Interaction with Wipe on loop
+
+`wipe_on_loops` is an independent option that makes a short move before leaving
+an external loop. It can operate with `wipe_inward` disabled. When both options
+are enabled, its destination is the starting position for the inward wipe.
+
+The loop move samples the outgoing and incoming paths by distance across path
+boundaries. The sampling distance is bounded by the nozzle diameter and one
+quarter of the total path length. It samples the outgoing path at up to 20% of
+the nozzle diameter and rotates that point around the seam through one third
+of the material-side corner angle. For a closed square outer contour, this
+produces a move of 20% of the nozzle diameter at 30 degrees into the corner.
+Coincident samples or degenerate angles suppress the move.
+
+The nozzle position stored by G-code generation must match the emitted loop
+move. Both travel planning and wipe execution depend on this position, including
+when Wipe inward is disabled.
+
+With a seam gap, a loop move may advance past the inward offset's original entry.
+If that alone makes the connector backtrack, the entry advances to the nozzle's
+projection on the offset. The planner extends the source as needed to preserve
+the configured wipe length and validates the new connector and complete path.
+Joins that already backtrack across the seam gap are not adjusted this way.
+
+## Execution and retraction
+
+The stored wipe path uses a sentinel first point. Execution starts from the
+actual nozzle position and proceeds to the second stored point. Path selection,
+support validation and wipe-length calculation must all use this same executable
+geometry, especially after a Wipe on loop move.
+
+An accepted inward path executes at the end of the external loop, after any
+Wipe on loop move, without retracting filament. It consumes the stored path and
+updates the nozzle position before travel planning. A short travel to the next
+wall cannot discard this wipe or force a retraction or Z-hop. Subsequent travel
+uses the normal minimum-travel threshold and retraction/lift settings from the
+new position. The regular wipe, including fallback, remains deferred until a
+normal retraction uses it.
+
+Retraction is divided into portions before, during and after wiping. The amount
+that can be retracted during the wipe depends on its executable length, wipe
+speed and the active filament's retraction speed. Fractional retraction speeds
+are retained in this calculation. For a 2 mm wipe at 100 mm/s and a retraction
+speed of 25.5 mm/s, the wipe can retract 0.51 mm. With a total retraction of 0.8 mm
+and both before/after percentages set to zero, the remaining 0.29 mm is retracted
+before wiping. This split applies to regular deferred wipes, including fallback;
+an accepted inward wipe executes separately without retraction.
+
+## Implementation and verification
+
+- [GCode.cpp](../../src/libslic3r/GCode.cpp) integrates path selection, nozzle
+  position and retraction; [Print.cpp](../../src/libslic3r/Print.cpp) controls
+  invalidation, and [PrintConfig.cpp](../../src/libslic3r/PrintConfig.cpp) defines
+  the settings.
+- [WipePathHelpers](../../src/libslic3r/GCode/WipePathHelpers.hpp) implements path
+  sampling, offset selection and support checks.
+- [Geometry tests](../../tests/libslic3r/test_wipe_path.cpp) cover support,
+  degenerate paths, contour and hole orientations, and exact loop-move geometry
+  across path subdivisions.
+- [FFF tests](../../tests/fff_print/test_wipe.cpp) cover emitted trajectories,
+  fallback, minimum-travel retraction and Z-hop rules, and export invalidation.
+  With Wipe inward disabled, they check the loop move's direction and magnitude
+  for Classic and Arachne, the subsequent wipe's start and length, and fractional
+  retraction splitting in absolute and relative E modes.
+  Loop-move checks use reserved role/wipe markers and extrusion state, and run
+  with human-readable G-code comments both enabled and disabled.

resources/data/hints.ini

@@ -75,7 +75,7 @@ documentation_link = https://www.orcaslicer.com/wiki/material_temperatures#print
 
 [hint:Calibration]
 text = Calibration\nDid you know that calibrating your printer can do wonders? Check out our beloved calibration solution in OrcaSlicer.
-documentation_link = https://www.orcaslicer.com/wiki/calibration
+documentation_link = https://www.orcaslicer.com/wiki/calibration_guide
 
 [hint:Auxiliary fan]
 text = Auxiliary fan\nDid you know that OrcaSlicer supports Auxiliary part cooling fan?

resources/profiles/BBL/filament/addnorth/addnorth ABS rABS.json

@@ -334,6 +334,5 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"105"
-	],
-	"version": "2.0.0.77"
+	]
 }

resources/profiles/BBL/filament/addnorth/addnorth PA Adura FDA.json

@@ -334,6 +334,5 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"100"
-	],
-	"version": "2.0.0.77"
+	]
 }

resources/profiles/BBL/filament/addnorth/addnorth PA Adura.json

@@ -334,6 +334,5 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"100"
-	],
-	"version": "2.0.0.77"
+	]
 }

resources/profiles/BBL/filament/addnorth/addnorth PA-CF Adura X.json

@@ -334,6 +334,5 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"100"
-	],
-	"version": "2.0.0.77"
+	]
 }

resources/profiles/BBL/filament/addnorth/addnorth PA6 Addlantis.json

@@ -334,6 +334,5 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"100"
-	],
-	"version": "2.0.0.77"
+	]
 }

resources/profiles/BBL/filament/addnorth/addnorth PC BLend HT LCF.json

@@ -334,6 +334,5 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"100"
-	],
-	"version": "2.0.0.77"
+	]
 }

resources/profiles/BBL/filament/addnorth/addnorth PETG Base.json

@@ -334,6 +334,5 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"75"
-	],
-	"version": "2.0.0.77"
+	]
 }

resources/profiles/BBL/filament/addnorth/addnorth PETG ESD.json

@@ -334,6 +334,5 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"70"
-	],
-	"version": "2.0.0.77"
+	]
 }

resources/profiles/BBL/filament/addnorth/addnorth PETG Economy.json

@@ -334,6 +334,5 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"75"
-	],
-	"version": "2.0.0.77"
+	]
 }

resources/profiles/BBL/filament/addnorth/addnorth PETG Flame v0.json

@@ -334,6 +334,5 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"70"
-	],
-	"version": "2.0.0.77"
+	]
 }

resources/profiles/BBL/filament/addnorth/addnorth PETG PRO Matte.json

@@ -334,6 +334,5 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"80"
-	],
-	"version": "2.0.0.77"
+	]
 }

resources/profiles/BBL/filament/addnorth/addnorth PETG rPETG Matte.json

@@ -334,6 +334,5 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"75"
-	],
-	"version": "2.0.0.77"
+	]
 }

resources/profiles/BBL/filament/addnorth/addnorth PETG-CF Rigid X.json

@@ -334,6 +334,5 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"80"
-	],
-	"version": "2.0.0.77"
+	]
 }

resources/profiles/BBL/filament/addnorth/addnorth PLA E-PLA.json

@@ -334,6 +334,5 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"65"
-	],
-	"version": "2.0.0.77"
+	]
 }

resources/profiles/BBL/filament/addnorth/addnorth PLA Economy.json

@@ -334,6 +334,5 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"65"
-	],
-	"version": "2.0.0.77"
+	]
 }

resources/profiles/BBL/filament/addnorth/addnorth PLA HT-PLA PRO Matte.json

@@ -334,6 +334,5 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"75"
-	],
-	"version": "2.0.0.77"
+	]
 }

resources/profiles/BBL/filament/addnorth/addnorth PLA Premium Silk.json

@@ -334,6 +334,5 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"65"
-	],
-	"version": "2.0.0.77"
+	]
 }

resources/profiles/BBL/filament/addnorth/addnorth PLA Textura.json

@@ -334,6 +334,5 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"65"
-	],
-	"version": "2.0.0.77"
+	]
 }

resources/profiles/BBL/filament/addnorth/addnorth PLA Wood.json

@@ -334,6 +334,5 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"60"
-	],
-	"version": "2.0.0.77"
+	]
 }

resources/profiles/BBL/filament/addnorth/addnorth PLA X-PLA High Speed.json

@@ -334,6 +334,5 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"65"
-	],
-	"version": "2.0.0.77"
+	]
 }

resources/profiles/BBL/filament/addnorth/addnorth PLA X-PLA.json

@@ -334,6 +334,5 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"65"
-	],
-	"version": "2.0.0.77"
+	]
 }

resources/profiles/BBL/filament/addnorth/addnorth PLA rPLA RE-ADD.json

@@ -334,6 +334,5 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"65"
-	],
-	"version": "2.0.0.77"
+	]
 }

resources/profiles/BBL/filament/addnorth/addnorth PLA-CF Carbon Fiber.json

@@ -315,6 +315,5 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"55"
-	],
-	"version": "2.0.0.87"
+	]
 }

resources/profiles/BBL/filament/addnorth/addnorth PVDF Adamant S1.json

@@ -334,6 +334,5 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"100"
-	],
-	"version": "2.0.0.77"
+	]
 }

resources/profiles/BBL/filament/addnorth/addnorth TPU EasyFlex.json

@@ -334,6 +334,5 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"35"
-	],
-	"version": "2.0.0.77"
+	]
 }

resources/profiles/BBL/filament/addnorth/addnorth TPU Pro Matte 85A.json

@@ -334,6 +334,5 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"35"
-	],
-	"version": "2.0.0.77"
+	]
 }

resources/profiles/BBL/filament/addnorth/addnorth TPU Pro Matte 95A.json

@@ -335,6 +335,5 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"35"
-	],
-	"version": "2.0.0.77"
+	]
 }

resources/profiles/Chuanying.json

@@ -89,14 +89,14 @@
 			"name": "Generic PETG @Chuanying X1 0.25 Nozzle",
 			"sub_path": "filament/Generic PETG @Chuanying X1 0.25 Nozzle.json"
 		},
-		{
-			"name": "Generic PVA @Chuanying",
-			"sub_path": "filament/Generic PVA @Chuanying.json"
-		},
 		{
 			"name": "Generic PLA @Chuanying X1 0.25 Nozzle",
 			"sub_path": "filament/Generic PLA @Chuanying X1 0.25 Nozzle.json"
 		},
+		{
+			"name": "Generic PVA @Chuanying",
+			"sub_path": "filament/Generic PVA @Chuanying.json"
+		},
 		{
 			"name": "Generic PLA-Silk @Chuanying X1 0.25 Nozzle",
 			"sub_path": "filament/Generic PLA-Silk @Chuanying X1 0.25 Nozzle.json"

resources/profiles/CoLiDo.json

@@ -196,6 +196,10 @@
 			"name": "Generic ABS @CoLiDo X16",
 			"sub_path": "filament/Generic ABS @CoLiDo X16.json"
 		},
+		{
+			"name": "CoLiDo PETG @CoLiDo SR1",
+			"sub_path": "filament/CoLiDo PETG @CoLiDo SR1.json"
+		},
 		{
 			"name": "Generic PETG @CoLiDo DIY 4.0",
 			"sub_path": "filament/Generic PETG @CoLiDo DIY 4.0.json"
@@ -204,18 +208,6 @@
 			"name": "Generic PETG @CoLiDo X16",
 			"sub_path": "filament/Generic PETG @CoLiDo X16.json"
 		},
-		{
-			"name": "CoLiDo PETG @CoLiDo SR1",
-			"sub_path": "filament/CoLiDo PETG @CoLiDo SR1.json"
-		},
-		{
-			"name": "Generic PLA @CoLiDo DIY 4.0",
-			"sub_path": "filament/Generic PLA @CoLiDo DIY 4.0.json"
-		},
-		{
-			"name": "Generic PLA @CoLiDo X16",
-			"sub_path": "filament/Generic PLA @CoLiDo X16.json"
-		},
 		{
 			"name": "CoLiDo PLA @CoLiDo SR1",
 			"sub_path": "filament/CoLiDo PLA @CoLiDo SR1.json"
@@ -228,6 +220,14 @@
 			"name": "CoLiDo PLA+ @CoLiDo DIY 4.0 V2",
 			"sub_path": "filament/CoLiDo PLA+ @CoLiDo DIY 4.0 V2.json"
 		},
+		{
+			"name": "Generic PLA @CoLiDo DIY 4.0",
+			"sub_path": "filament/Generic PLA @CoLiDo DIY 4.0.json"
+		},
+		{
+			"name": "Generic PLA @CoLiDo X16",
+			"sub_path": "filament/Generic PLA @CoLiDo X16.json"
+		},
 		{
 			"name": "Generic TPU @CoLiDo DIY 4.0",
 			"sub_path": "filament/Generic TPU @CoLiDo DIY 4.0.json"

resources/profiles/Creality/filament/CR-ABS @Ender-5 Max-all.json

@@ -1,160 +0,0 @@
-{
-    "type": "filament",
-    "name": "CR-ABS @Ender-5 Max-all",
-    "inherits": "fdm_filament_abs",
-    "from": "system",
-    "setting_id": "iCeI2obXsgQdrmmd",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "90"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "90"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "fan_max_speed": [
-        "30"
-    ],
-    "filament_cost": [
-        "15"
-    ],
-    "filament_density": [
-        "1.08"
-    ],
-    "filament_deretraction_speed": [
-        "35"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.93"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "1"
-    ],
-    "filament_retraction_speed": [
-        "35"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "2"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "90"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "90"
-    ],
-    "nozzle_temperature_range_high": [
-        "280"
-    ],
-    "overhang_fan_speed": [
-        "60"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "textured_plate_temp": [
-        "90"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "90"
-    ],
-    "filament_start_gcode": [
-        "; Filament gcode\n"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "90",
-    "customized_plate_temp_initial_layer": "90",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "90",
-    "epoxy_resin_plate_temp_initial_layer": "90",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,230],[5.0,250],[10.0,260]]",
-    "pressure_advance": "0.03",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Ender-5 Max 0.4 nozzle"
-    ]
-}

resources/profiles/Creality/filament/CR-Nylon @Ender-5 Max-all.json

@@ -1,185 +0,0 @@
-{
-    "type": "filament",
-    "name": "CR-Nylon @Ender-5 Max-all",
-    "inherits": "fdm_filament_pa",
-    "from": "system",
-    "setting_id": "HHnHotIUIBzTdckU",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "1"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "100"
-    ],
-    "cool_plate_temp": [
-        "45"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "45"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "fan_cooling_layer_time": [
-        "100"
-    ],
-    "fan_max_speed": [
-        "100"
-    ],
-    "fan_min_speed": [
-        "100"
-    ],
-    "filament_cost": [
-        "50"
-    ],
-    "filament_density": [
-        "1.24"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.9"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "12"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "0"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1.5"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "0.2"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "45"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "45"
-    ],
-    "nozzle_temperature": [
-        "250"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "250"
-    ],
-    "nozzle_temperature_range_high": [
-        "280"
-    ],
-    "nozzle_temperature_range_low": [
-        "250"
-    ],
-    "overhang_fan_speed": [
-        "50"
-    ],
-    "overhang_fan_threshold": [
-        "50%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "slow_down_for_layer_cooling": [
-        "1"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "slow_down_min_speed": [
-        "5"
-    ],
-    "textured_plate_temp": [
-        "45"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "45"
-    ],
-    "filament_start_gcode": [
-        "; Filament gcode\n"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "45",
-    "epoxy_resin_plate_temp_initial_layer": "45",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "0",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.042",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Ender-5 Max 0.4 nozzle"
-    ]
-}

resources/profiles/Creality/filament/CR-PETG @Ender-5 Max-all.json

@@ -1,163 +0,0 @@
-{
-    "type": "filament",
-    "name": "CR-PETG @Ender-5 Max-all",
-    "inherits": "fdm_filament_petg",
-    "from": "system",
-    "setting_id": "jMfevCqhjSPahBHJ",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "1"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "70"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "70"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "0"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "40"
-    ],
-    "fan_min_speed": [
-        "10"
-    ],
-    "filament_cost": [
-        "14"
-    ],
-    "filament_density": [
-        "1.23"
-    ],
-    "filament_deretraction_speed": [
-        "30"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "16"
-    ],
-    "filament_retract_before_wipe": [
-        "80%"
-    ],
-    "filament_retraction_minimum_travel": [
-        "1"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_type": [
-        "PETG"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe_distance": [
-        "2"
-    ],
-    "hot_plate_temp": [
-        "80"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "80"
-    ],
-    "nozzle_temperature": [
-        "240"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "240"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "220"
-    ],
-    "overhang_fan_speed": [
-        "90"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "temperature_vitrification": [
-        "80"
-    ],
-    "textured_plate_temp": [
-        "80"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "80"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "80",
-    "customized_plate_temp_initial_layer": "80",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "80",
-    "epoxy_resin_plate_temp_initial_layer": "80",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,220],[5.0,240],[10.0,250]]",
-    "pressure_advance": "0.05",
-    "filament_id": "06101",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Ender-5 Max 0.4 nozzle",
-        "Creality Ender-5 Max 0.6 nozzle",
-        "Creality Ender-5 Max 0.8 nozzle"
-    ]
-}

resources/profiles/Creality/filament/CR-PLA @Ender-5 Max-all.json

@@ -1,157 +0,0 @@
-{
-    "type": "filament",
-    "name": "CR-PLA @Ender-5 Max-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "sU0HCPjQoOLHPmPc",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "45"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "45"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_deretraction_speed": [
-        "35"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "1"
-    ],
-    "filament_retraction_speed": [
-        "35"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "2"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "10"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "45"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_start_gcode": [
-        "; Filament gcode\n"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "50",
-    "customized_plate_temp_initial_layer": "50",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "50",
-    "epoxy_resin_plate_temp_initial_layer": "50",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "1",
-    "material_flow_temp_graph": "[[0.5,190],[1.0,220]]",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Ender-5 Max 0.4 nozzle"
-    ]
-}

resources/profiles/Creality/filament/CR-Silk @Ender-5 Max-all.json

@@ -1,157 +0,0 @@
-{
-    "type": "filament",
-    "name": "CR-Silk @Ender-5 Max-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "vFgKdtdiuqqrL9rk",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "45"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "45"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "22"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
-    "filament_deretraction_speed": [
-        "35"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "90%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1"
-    ],
-    "filament_retraction_minimum_travel": [
-        "1"
-    ],
-    "filament_retraction_speed": [
-        "35"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "2"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "55"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "55"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "55"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "55"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "55",
-    "customized_plate_temp_initial_layer": "55",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "55",
-    "epoxy_resin_plate_temp_initial_layer": "55",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,190],[1.2,220]]",
-    "pressure_advance": "0.048",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Ender-5 Max 0.4 nozzle"
-    ]
-}

resources/profiles/Creality/filament/Generic ABS @Ender-5 Max-all.json

@@ -1,163 +0,0 @@
-{
-    "type": "filament",
-    "name": "Generic ABS @Ender-5 Max-all",
-    "inherits": "fdm_filament_abs",
-    "from": "system",
-    "setting_id": "3BjyaE4hGrz7tqnk",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "90"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "90"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "fan_max_speed": [
-        "30"
-    ],
-    "filament_cost": [
-        "15"
-    ],
-    "filament_density": [
-        "1.24"
-    ],
-    "filament_deretraction_speed": [
-        "35"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "1"
-    ],
-    "filament_retraction_speed": [
-        "35"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "2"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "90"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "90"
-    ],
-    "nozzle_temperature_range_high": [
-        "280"
-    ],
-    "overhang_fan_speed": [
-        "60"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "0"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "textured_plate_temp": [
-        "90"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "90"
-    ],
-    "filament_start_gcode": [
-        "; Filament gcode\n"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "90",
-    "customized_plate_temp_initial_layer": "90",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "90",
-    "epoxy_resin_plate_temp_initial_layer": "90",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,230],[5.0,250],[10.0,260]]",
-    "pressure_advance": "0.034",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Ender-5 Max 0.4 nozzle"
-    ]
-}

resources/profiles/Creality/filament/Generic ASA @Ender-5 Max-all.json

@@ -1,175 +0,0 @@
-{
-    "type": "filament",
-    "name": "Generic ASA @Ender-5 Max-all",
-    "inherits": "fdm_filament_asa",
-    "from": "system",
-    "setting_id": "1cOFjktr0dBTbYS4",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "1"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "90"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "90"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "70"
-    ],
-    "fan_min_speed": [
-        "20"
-    ],
-    "filament_cost": [
-        "30"
-    ],
-    "filament_density": [
-        "1.24"
-    ],
-    "filament_deretraction_speed": [
-        "35"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.93"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "12"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "100%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "1"
-    ],
-    "filament_retraction_speed": [
-        "35"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "2"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "90"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "90"
-    ],
-    "nozzle_temperature_range_high": [
-        "280"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "0"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "textured_plate_temp": [
-        "90"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "90"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "55",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "90",
-    "customized_plate_temp_initial_layer": "90",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "90",
-    "epoxy_resin_plate_temp_initial_layer": "90",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,240],[8.0,250],[12.0,260]]",
-    "pressure_advance": "0.03",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Ender-5 Max 0.4 nozzle"
-    ]
-}

resources/profiles/Creality/filament/Generic PETG @Ender-5 Max-all.json

@@ -1,163 +0,0 @@
-{
-    "type": "filament",
-    "name": "Generic PETG @Ender-5 Max-all",
-    "inherits": "fdm_filament_petg",
-    "from": "system",
-    "setting_id": "yNgF407ERXuU7LHE",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "1"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "70"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "70"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "0"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "60"
-    ],
-    "fan_min_speed": [
-        "20"
-    ],
-    "filament_cost": [
-        "14"
-    ],
-    "filament_density": [
-        "1.24"
-    ],
-    "filament_deretraction_speed": [
-        "40"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "14"
-    ],
-    "filament_retract_before_wipe": [
-        "90%"
-    ],
-    "filament_retraction_length": [
-        "0.4"
-    ],
-    "filament_retraction_minimum_travel": [
-        "1"
-    ],
-    "filament_retraction_speed": [
-        "40"
-    ],
-    "filament_type": [
-        "PETG"
-    ],
-    "filament_wipe_distance": [
-        "2"
-    ],
-    "hot_plate_temp": [
-        "80"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "80"
-    ],
-    "nozzle_temperature": [
-        "240"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "240"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "220"
-    ],
-    "overhang_fan_speed": [
-        "90"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "temperature_vitrification": [
-        "80"
-    ],
-    "textured_plate_temp": [
-        "80"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "80"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "80",
-    "customized_plate_temp_initial_layer": "80",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "80",
-    "epoxy_resin_plate_temp_initial_layer": "80",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.8,230],[1.0,240]]",
-    "pressure_advance": "0.064",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Ender-5 Max 0.4 nozzle"
-    ]
-}

resources/profiles/Creality/filament/Generic PLA @Ender-5 Max-all.json

@@ -1,161 +0,0 @@
-{
-    "type": "filament",
-    "name": "Generic PLA @Ender-5 Max-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "ubfcxetXGj6agAoi",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "45"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "45"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_deretraction_speed": [
-        "35"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "14"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "80%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "0.8"
-    ],
-    "filament_retraction_minimum_travel": [
-        "1"
-    ],
-    "filament_retraction_speed": [
-        "35"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "2"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "55"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "55"
-    ],
-    "nozzle_temperature": [
-        "210"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "210"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "55"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "55"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "55",
-    "customized_plate_temp_initial_layer": "55",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "55",
-    "epoxy_resin_plate_temp_initial_layer": "55",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.8,190],[1.0,210]]",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Ender-5 Max 0.4 nozzle"
-    ]
-}

resources/profiles/Creality/filament/Generic PLA-CF @Ender-5 Max-all.json

@@ -1,161 +0,0 @@
-{
-    "type": "filament",
-    "name": "Generic PLA-CF @Ender-5 Max-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "AHrCSGRui6sRCmQx",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "45"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "45"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "30"
-    ],
-    "filament_deretraction_speed": [
-        "35"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "18"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "1"
-    ],
-    "filament_retraction_speed": [
-        "35"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PLA-CF"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "2"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "10"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "50",
-    "customized_plate_temp_initial_layer": "50",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "50",
-    "epoxy_resin_plate_temp_initial_layer": "50",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,190],[1.2,220]]",
-    "pressure_advance": "0.03",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Ender-5 Max 0.4 nozzle"
-    ]
-}

resources/profiles/Creality/filament/Generic PLA-Silk @Ender-5 Max-all.json

@@ -1,155 +0,0 @@
-{
-    "type": "filament",
-    "name": "Generic PLA-Silk @Ender-5 Max-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "zIrKl9P6Aer6sbiS",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "45"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "45"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_deretraction_speed": [
-        "30"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "10"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "80%"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "0.8"
-    ],
-    "filament_retraction_minimum_travel": [
-        "1"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "2"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "55"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "55"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "14"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "55"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "55"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "55",
-    "customized_plate_temp_initial_layer": "55",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "55",
-    "epoxy_resin_plate_temp_initial_layer": "55",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.8,190],[1.0,220]]",
-    "pressure_advance": "0.044",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Ender-5 Max 0.4 nozzle"
-    ]
-}

resources/profiles/Creality/filament/Generic TPU @Ender-5 Max-all.json

@@ -1,166 +0,0 @@
-{
-    "type": "filament",
-    "name": "Generic TPU @Ender-5 Max-all",
-    "inherits": "fdm_filament_tpu",
-    "from": "system",
-    "setting_id": "KPUcdZyegXYeyHOL",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "45"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "45"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "35"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "35"
-    ],
-    "filament_cost": [
-        "25"
-    ],
-    "filament_deretraction_speed": [
-        "35"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "1"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "2"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "35"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Generic"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "2"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature": [
-        "210"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "210"
-    ],
-    "nozzle_temperature_range_high": [
-        "220"
-    ],
-    "overhang_fan_threshold": [
-        "50%"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "10"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "50",
-    "customized_plate_temp_initial_layer": "50",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "50",
-    "epoxy_resin_plate_temp_initial_layer": "50",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.4",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Ender-5 Max 0.4 nozzle"
-    ]
-}

resources/profiles/Creality/filament/HP-ASA @Ender-5 Max-all.json

@@ -1,175 +0,0 @@
-{
-    "type": "filament",
-    "name": "HP-ASA @Ender-5 Max-all",
-    "inherits": "fdm_filament_asa",
-    "from": "system",
-    "setting_id": "JzsojF2Um23vm2qT",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "1"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "90"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "90"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "50"
-    ],
-    "fan_min_speed": [
-        "20"
-    ],
-    "filament_cost": [
-        "29"
-    ],
-    "filament_density": [
-        "1.15"
-    ],
-    "filament_deretraction_speed": [
-        "35"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.88"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "16"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "1"
-    ],
-    "filament_retraction_speed": [
-        "35"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "2"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "90"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "90"
-    ],
-    "nozzle_temperature_range_high": [
-        "280"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "0"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "10"
-    ],
-    "textured_plate_temp": [
-        "90"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "90"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "55",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "90",
-    "customized_plate_temp_initial_layer": "90",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "90",
-    "epoxy_resin_plate_temp_initial_layer": "90",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,240],[8.0,250],[12.0,260]]",
-    "pressure_advance": "0.032",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Ender-5 Max 0.4 nozzle"
-    ]
-}

resources/profiles/Creality/filament/HP-TPU @Ender-5 Max-all.json

@@ -1,168 +0,0 @@
-{
-    "type": "filament",
-    "name": "HP-TPU @Ender-5 Max-all",
-    "inherits": "fdm_filament_tpu",
-    "from": "system",
-    "setting_id": "7Y7KjqVEXrce3jKO",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "45"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "45"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "35"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "35"
-    ],
-    "filament_density": [
-        "1.26"
-    ],
-    "filament_deretraction_speed": [
-        "35"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "1"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "2.5"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1"
-    ],
-    "filament_retraction_minimum_travel": [
-        "2"
-    ],
-    "filament_retraction_speed": [
-        "35"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "2"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature": [
-        "210"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "210"
-    ],
-    "nozzle_temperature_range_high": [
-        "220"
-    ],
-    "overhang_fan_threshold": [
-        "50%"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "10"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "50",
-    "customized_plate_temp_initial_layer": "50",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "50",
-    "epoxy_resin_plate_temp_initial_layer": "50",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,210],  [10.0,220],  [12.0,230]]",
-    "pressure_advance": "0.4",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Ender-5 Max 0.4 nozzle",
-        "Creality Ender-5 Max 0.6 nozzle",
-        "Creality Ender-5 Max 0.8 nozzle"
-    ]
-}

resources/profiles/Creality/filament/Hyper ABS @Ender-5 Max-all.json

@@ -1,166 +0,0 @@
-{
-    "type": "filament",
-    "name": "Hyper ABS @Ender-5 Max-all",
-    "inherits": "fdm_filament_abs",
-    "from": "system",
-    "setting_id": "jPfMyNBquP31h2Eb",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "90"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "90"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "fan_max_speed": [
-        "20"
-    ],
-    "fan_min_speed": [
-        "20"
-    ],
-    "filament_cost": [
-        "15"
-    ],
-    "filament_density": [
-        "1.08"
-    ],
-    "filament_deretraction_speed": [
-        "nil"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.92"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "60"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "0"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "nil"
-    ],
-    "filament_retraction_speed": [
-        "nil"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "nil"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "90"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "90"
-    ],
-    "nozzle_temperature_range_high": [
-        "260"
-    ],
-    "nozzle_temperature_range_low": [
-        "230"
-    ],
-    "overhang_fan_speed": [
-        "20"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "5"
-    ],
-    "textured_plate_temp": [
-        "90"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "90"
-    ],
-    "filament_start_gcode": [
-        "; Filament gcode\n"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "90",
-    "epoxy_resin_plate_temp_initial_layer": "90",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "0",
-    "filament_retract_lift_below": "0",
-    "filament_retract_lift_enforce": "All Surfaces",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[3.0,230],[5.0,250],[10.0,260]]",
-    "pressure_advance": "0.025",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Ender-5 Max 0.4 nozzle",
-        "Creality Ender-5 Max 0.6 nozzle",
-        "Creality Ender-5 Max 0.8 nozzle"
-    ]
-}

resources/profiles/Creality/filament/Hyper PETG @Ender-5 Max-all.json

@@ -1,163 +0,0 @@
-{
-    "type": "filament",
-    "name": "Hyper PETG @Ender-5 Max-all",
-    "inherits": "fdm_filament_petg",
-    "from": "system",
-    "setting_id": "nr57CpZ5PwPmcOCR",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "close_fan_the_first_x_layers": [
-        "1"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "70"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "70"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "0"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "fan_max_speed": [
-        "50"
-    ],
-    "fan_min_speed": [
-        "20"
-    ],
-    "filament_cost": [
-        "25"
-    ],
-    "filament_density": [
-        "1.23"
-    ],
-    "filament_deretraction_speed": [
-        "30"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "23"
-    ],
-    "filament_retract_before_wipe": [
-        "80%"
-    ],
-    "filament_retraction_minimum_travel": [
-        "1"
-    ],
-    "filament_retraction_speed": [
-        "30"
-    ],
-    "filament_type": [
-        "PETG"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe_distance": [
-        "2"
-    ],
-    "hot_plate_temp": [
-        "80"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "80"
-    ],
-    "nozzle_temperature": [
-        "240"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "240"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "nozzle_temperature_range_low": [
-        "220"
-    ],
-    "overhang_fan_speed": [
-        "90"
-    ],
-    "overhang_fan_threshold": [
-        "25%"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "12"
-    ],
-    "temperature_vitrification": [
-        "80"
-    ],
-    "textured_plate_temp": [
-        "80"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "80"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "80",
-    "customized_plate_temp_initial_layer": "80",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "80",
-    "epoxy_resin_plate_temp_initial_layer": "80",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[0.8,220],[1.0,240]]",
-    "pressure_advance": "0.05",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Ender-5 Max 0.4 nozzle"
-    ]
-}

resources/profiles/Creality/filament/Hyper PLA @Ender-5 Max-all.json

@@ -1,160 +0,0 @@
-{
-    "type": "filament",
-    "name": "Hyper PLA @Ender-5 Max-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "Nb1H9jKg8CPQXLVI",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "cool_plate_temp": [
-        "45"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "45"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "30"
-    ],
-    "filament_deretraction_speed": [
-        "35"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "23"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "1"
-    ],
-    "filament_retraction_minimum_travel": [
-        "1"
-    ],
-    "filament_retraction_speed": [
-        "35"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "2"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "55"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "45"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "10"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "55"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "45"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "0",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "55",
-    "customized_plate_temp_initial_layer": "45",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "55",
-    "epoxy_resin_plate_temp_initial_layer": "45",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_shrinkage_compensation_z": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,190],[1.5,220]]",
-    "pressure_advance": "0.048",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Ender-5 Max 0.4 nozzle",
-        "Creality Ender-5 Max 0.6 nozzle",
-        "Creality Ender-5 Max 0.8 nozzle"
-    ]
-}

resources/profiles/Creality/filament/Hyper PLA-CF @Ender-5 Max-all.json

@@ -1,163 +0,0 @@
-{
-    "type": "filament",
-    "name": "Hyper PLA-CF @Ender-5 Max-all",
-    "inherits": "fdm_filament_pla",
-    "from": "system",
-    "setting_id": "pW3AHx1VemLWSa7q",
-    "instantiation": "true",
-    "activate_air_filtration": [
-        "0"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "complete_print_exhaust_fan_speed": [
-        "80"
-    ],
-    "cool_plate_temp": [
-        "45"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "45"
-    ],
-    "during_print_exhaust_fan_speed": [
-        "60"
-    ],
-    "eng_plate_temp": [
-        "50"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_cost": [
-        "32"
-    ],
-    "filament_density": [
-        "1.27"
-    ],
-    "filament_deretraction_speed": [
-        "35"
-    ],
-    "filament_diameter": [
-        "1.75"
-    ],
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_is_support": [
-        "0"
-    ],
-    "filament_max_volumetric_speed": [
-        "23"
-    ],
-    "filament_minimal_purge_on_wipe_tower": [
-        "15"
-    ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
-        "nil"
-    ],
-    "filament_retract_when_changing_layer": [
-        "nil"
-    ],
-    "filament_retraction_length": [
-        "nil"
-    ],
-    "filament_retraction_minimum_travel": [
-        "1"
-    ],
-    "filament_retraction_speed": [
-        "35"
-    ],
-    "filament_soluble": [
-        "0"
-    ],
-    "filament_type": [
-        "PLA-CF"
-    ],
-    "filament_vendor": [
-        "Creality"
-    ],
-    "filament_wipe": [
-        "nil"
-    ],
-    "filament_wipe_distance": [
-        "2"
-    ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "full_fan_speed_layer": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "50"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "50"
-    ],
-    "nozzle_temperature_range_high": [
-        "240"
-    ],
-    "required_nozzle_HRC": [
-        "0"
-    ],
-    "slow_down_layer_time": [
-        "10"
-    ],
-    "slow_down_min_speed": [
-        "20"
-    ],
-    "textured_plate_temp": [
-        "50"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "50"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \n"
-    ],
-    "activate_chamber_temp_control": "0",
-    "chamber_temperature": "35",
-    "cool_cds_fan_start_at_height": "0.5",
-    "cool_special_cds_fan_speed": "0",
-    "customized_plate_temp": "50",
-    "customized_plate_temp_initial_layer": "50",
-    "default_filament_colour": "\"\"",
-    "enable_overhang_bridge_fan": "1",
-    "enable_pressure_advance": "1",
-    "enable_special_area_additional_cooling_fan": "0",
-    "epoxy_resin_plate_temp": "50",
-    "epoxy_resin_plate_temp_initial_layer": "50",
-    "filament_cooling_final_speed": "3.4",
-    "filament_cooling_initial_speed": "2.2",
-    "filament_cooling_moves": "4",
-    "filament_load_time": "0",
-    "filament_loading_speed": "28",
-    "filament_loading_speed_start": "3",
-    "filament_multitool_ramming": "0",
-    "filament_multitool_ramming_flow": "10",
-    "filament_multitool_ramming_volume": "10",
-    "filament_notes": "\"\"",
-    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
-    "filament_retract_lift_above": "nil",
-    "filament_retract_lift_below": "nil",
-    "filament_retract_lift_enforce": "nil",
-    "filament_shrink": "100%",
-    "filament_toolchange_delay": "0",
-    "filament_unload_time": "0",
-    "filament_unloading_speed": "90",
-    "filament_unloading_speed_start": "100",
-    "material_flow_dependent_temperature": "0",
-    "material_flow_temp_graph": "[[1.0,190],[1.2,220]]",
-    "pressure_advance": "0.04",
-    "support_material_interface_fan_speed": "-1",
-    "compatible_printers": [
-        "Creality Ender-5 Max 0.4 nozzle"
-    ]
-}

resources/profiles/Elegoo/filament/fdm_filament_paht.json

@@ -1,91 +0,0 @@
-{
-	"type": "filament",
-	"name": "fdm_filament_paht",
-	"inherits": "fdm_filament_common",
-	"from": "system",
-	"instantiation": "false",
-	"filament_max_volumetric_speed": [
-		"12"
-	],
-	"filament_type": [
-		"PAHT"
-	],
-	"filament_density": [
-		"1.24"
-	],
-	"filament_cost": [
-		"0"
-	],
-	"cool_plate_temp": [
-		"35"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"textured_plate_temp": [
-		"60"
-	],
-	"cool_plate_temp_initial_layer": [
-		"35"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"textured_plate_temp_initial_layer": [
-		"60"
-	],
-	"nozzle_temperature_initial_layer": [
-		"220"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"nozzle_temperature": [
-		"220"
-	],
-	"temperature_vitrification": [
-		"45"
-	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
-	"nozzle_temperature_range_high": [
-		"240"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"80"
-	],
-	"fan_min_speed": [
-		"50"
-	],
-	"hot_plate_temp": [
-		"60"
-	],
-	"hot_plate_temp_initial_layer": [
-		"60"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"filament_start_gcode": [
-		"; Filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	],
-	"filament_vendor": [
-		"Generic"
-	]
-}

resources/profiles/Elegoo/process/EOSGIGA/0.30mm Standard @Elegoo Giga 0.6 nozzle.json

@@ -1,15 +1,14 @@
 {
 	"type": "process",
 	"name": "0.30mm Standard @Elegoo Giga 0.6 nozzle",
+	"renamed_from": "0.30mm Standard @EOS Giga 0.6 nozzle",
 	"inherits": "fdm_process_elegoo_06030",
 	"from": "system",
 	"setting_id": "mMP6cZhv9TYjYlEh",
 	"instantiation": "true",
-	"renamed_from": "0.30mm Standard @EOS Giga 0.6 nozzle",
 	"default_acceleration": "3000",
 	"filename_format": "EOGiga1_{nozzle_diameter[0]}_{input_filename_base}_{filament_name}_{layer_height}_{print_time}.gcode",
 	"initial_layer_acceleration": "1000",
-	"is_custom_defined": "0",
 	"make_overhang_printable_angle": "90",
 	"outer_wall_acceleration": "2000",
 	"resolution": "0.05",

resources/profiles/Elegoo/process/fdm_process_elegoo_02010.json

@@ -24,7 +24,6 @@
 	"sparse_infill_speed": "100",
 	"inner_wall_speed": "100",
 	"internal_solid_infill_speed": "100",
-	"is_custom_defined": "0",
 	"outer_wall_speed": "60",
 	"top_surface_speed": "80"
 }

resources/profiles/FLSun.json

@@ -244,26 +244,10 @@
 			"name": "Generic PLA @FLSun S1",
 			"sub_path": "filament/Generic PLA @FLSun S1.json"
 		},
-		{
-			"name": "Generic PLA High Speed @FLSun S1",
-			"sub_path": "filament/Generic PLA High Speed @FLSun S1.json"
-		},
-		{
-			"name": "Generic PLA Silk @FLSun S1",
-			"sub_path": "filament/Generic PLA Silk @FLSun S1.json"
-		},
 		{
 			"name": "Generic PLA @FLSun T1",
 			"sub_path": "filament/Generic PLA @FLSun T1.json"
 		},
-		{
-			"name": "Generic PLA High Speed @FLSun T1",
-			"sub_path": "filament/Generic PLA High Speed @FLSun T1.json"
-		},
-		{
-			"name": "Generic PLA Silk @FLSun T1",
-			"sub_path": "filament/Generic PLA Silk @FLSun T1.json"
-		},
 		{
 			"name": "Generic TPU @FLSun S1",
 			"sub_path": "filament/Generic TPU @FLSun S1.json"
@@ -271,6 +255,22 @@
 		{
 			"name": "Generic TPU @FLSun T1",
 			"sub_path": "filament/Generic TPU @FLSun T1.json"
+		},
+		{
+			"name": "Generic PLA High Speed @FLSun S1",
+			"sub_path": "filament/Generic PLA High Speed @FLSun S1.json"
+		},
+		{
+			"name": "Generic PLA High Speed @FLSun T1",
+			"sub_path": "filament/Generic PLA High Speed @FLSun T1.json"
+		},
+		{
+			"name": "Generic PLA Silk @FLSun S1",
+			"sub_path": "filament/Generic PLA Silk @FLSun S1.json"
+		},
+		{
+			"name": "Generic PLA Silk @FLSun T1",
+			"sub_path": "filament/Generic PLA Silk @FLSun T1.json"
 		}
 	],
 	"machine_list": [

resources/profiles/Flashforge.json

@@ -439,22 +439,6 @@
 			"name": "0.14mm Standard @FF AD5X 0.25 nozzle",
 			"sub_path": "process/0.14mm Standard @FF AD5X 0.25 nozzle.json"
 		},
-		{
-			"name": "0.08mm Standard @FF C5 0.25 nozzle",
-			"sub_path": "process/0.08mm Standard @FF C5 0.25 nozzle.json"
-		},
-		{
-			"name": "0.10mm Standard @FF C5 0.25 nozzle",
-			"sub_path": "process/0.10mm Standard @FF C5 0.25 nozzle.json"
-		},
-		{
-			"name": "0.12mm Standard @FF C5 0.25 nozzle",
-			"sub_path": "process/0.12mm Standard @FF C5 0.25 nozzle.json"
-		},
-		{
-			"name": "0.14mm Standard @FF C5 0.25 nozzle",
-			"sub_path": "process/0.14mm Standard @FF C5 0.25 nozzle.json"
-		},
 		{
 			"name": "0.14mm Standard @Flashforge AD5M 0.25 Nozzle",
 			"sub_path": "process/0.14mm Standard @Flashforge AD5M 0.25 Nozzle.json"
@@ -527,6 +511,22 @@
 			"name": "0.42mm Draft @FF AD5X 0.6 nozzle",
 			"sub_path": "process/0.42mm Draft @FF AD5X 0.6 nozzle.json"
 		},
+		{
+			"name": "0.08mm Standard @FF C5 0.25 nozzle",
+			"sub_path": "process/0.08mm Standard @FF C5 0.25 nozzle.json"
+		},
+		{
+			"name": "0.10mm Standard @FF C5 0.25 nozzle",
+			"sub_path": "process/0.10mm Standard @FF C5 0.25 nozzle.json"
+		},
+		{
+			"name": "0.12mm Standard @FF C5 0.25 nozzle",
+			"sub_path": "process/0.12mm Standard @FF C5 0.25 nozzle.json"
+		},
+		{
+			"name": "0.14mm Standard @FF C5 0.25 nozzle",
+			"sub_path": "process/0.14mm Standard @FF C5 0.25 nozzle.json"
+		},
 		{
 			"name": "0.24mm Fine @FF AD5X 0.8 nozzle",
 			"sub_path": "process/0.24mm Fine @FF AD5X 0.8 nozzle.json"
@@ -573,26 +573,30 @@
 			"name": "Generic ASA @Flashforge",
 			"sub_path": "filament/Generic ASA @Flashforge.json"
 		},
-		{
-			"name": "Generic PETG @Flashforge",
-			"sub_path": "filament/Generic PETG @Flashforge.json"
-		},
-		{
-			"name": "Generic PETG-CF10 @Flashforge",
-			"sub_path": "filament/Generic PETG-CF10 @Flashforge.json"
-		},
 		{
 			"name": "Flashforge PETG",
 			"sub_path": "filament/Flashforge/Flashforge PETG @FF AD3.json"
 		},
+		{
+			"name": "Generic PETG @Flashforge",
+			"sub_path": "filament/Generic PETG @Flashforge.json"
+		},
 		{
 			"name": "Generic PETG @Flashforge Artemis",
 			"sub_path": "filament/Flashforge Generic PETG @Flashforge Artemis.json"
 		},
+		{
+			"name": "Generic PETG-CF10 @Flashforge",
+			"sub_path": "filament/Generic PETG-CF10 @Flashforge.json"
+		},
 		{
 			"name": "SUNLU PETG @base",
 			"sub_path": "filament/SUNLU/SUNLU PETG @base.json"
 		},
+		{
+			"name": "Flashforge PLA",
+			"sub_path": "filament/Flashforge/Flashforge PLA @FF AD3.json"
+		},
 		{
 			"name": "Generic HS PLA @Flashforge",
 			"sub_path": "filament/Generic HS PLA @Flashforge.json"
@@ -609,10 +613,6 @@
 			"name": "Generic PLA-Silk @Flashforge",
 			"sub_path": "filament/Generic PLA-Silk @Flashforge.json"
 		},
-		{
-			"name": "Flashforge PLA",
-			"sub_path": "filament/Flashforge/Flashforge PLA @FF AD3.json"
-		},
 		{
 			"name": "SUNLU PLA Marble @base",
 			"sub_path": "filament/SUNLU/SUNLU PLA Marble @base.json"
@@ -709,6 +709,10 @@
 			"name": "Generic ABS @FF AD5M 0.25 Nozzle",
 			"sub_path": "filament/Generic ABS @FF AD5M 0.25 Nozzle.json"
 		},
+		{
+			"name": "Generic ABS @Flashforge AD4",
+			"sub_path": "filament/Generic ABS @Flashforge AD4.json"
+		},
 		{
 			"name": "Generic ABS @Flashforge G3U",
 			"sub_path": "filament/Generic ABS @Flashforge G3U.json"
@@ -729,10 +733,6 @@
 			"name": "Generic HIPS @Flashforge G3U 0.6 Nozzle",
 			"sub_path": "filament/Generic HIPS @Flashforge G3U 0.6 Nozzle.json"
 		},
-		{
-			"name": "Generic ABS @Flashforge AD4",
-			"sub_path": "filament/Generic ABS @Flashforge AD4.json"
-		},
 		{
 			"name": "Flashforge ASA @FF AD5M 0.25 Nozzle",
 			"sub_path": "filament/Flashforge ASA @FF AD5M 0.25 Nozzle.json"
@@ -745,41 +745,13 @@
 			"name": "Generic ASA @FF AD5M 0.25 Nozzle",
 			"sub_path": "filament/Generic ASA @FF AD5M 0.25 Nozzle.json"
 		},
-		{
-			"name": "Generic ASA @Flashforge G3U 0.6 Nozzle",
-			"sub_path": "filament/Generic ASA @Flashforge G3U 0.6 Nozzle.json"
-		},
 		{
 			"name": "Generic ASA @Flashforge AD4",
 			"sub_path": "filament/Generic ASA @Flashforge AD4.json"
 		},
 		{
-			"name": "Generic PETG @FF AD5M 0.25 Nozzle",
-			"sub_path": "filament/Generic PETG @FF AD5M 0.25 Nozzle.json"
-		},
-		{
-			"name": "Generic PETG @Flashforge G3U",
-			"sub_path": "filament/Generic PETG @Flashforge G3U.json"
-		},
-		{
-			"name": "Generic PETG @Flashforge G3U 0.6 Nozzle",
-			"sub_path": "filament/Generic PETG @Flashforge G3U 0.6 Nozzle.json"
-		},
-		{
-			"name": "Generic PETG @Flashforge G3U 0.8 Nozzle",
-			"sub_path": "filament/Generic PETG @Flashforge G3U 0.8 Nozzle.json"
-		},
-		{
-			"name": "Generic PETG-CF @Flashforge G3U",
-			"sub_path": "filament/Generic PETG-CF @Flashforge G3U.json"
-		},
-		{
-			"name": "Generic PETG-CF @Flashforge G3U 0.6 Nozzle",
-			"sub_path": "filament/Generic PETG-CF @Flashforge G3U 0.6 Nozzle.json"
-		},
-		{
-			"name": "Generic PETG-CF @Flashforge G3U 0.8 Nozzle",
-			"sub_path": "filament/Generic PETG-CF @Flashforge G3U 0.8 Nozzle.json"
+			"name": "Generic ASA @Flashforge G3U 0.6 Nozzle",
+			"sub_path": "filament/Generic ASA @Flashforge G3U 0.6 Nozzle.json"
 		},
 		{
 			"name": "Flashforge HS PETG",
@@ -905,10 +877,38 @@
 			"name": "FusRock S-PAHT @G3U 0.6 Nozzle",
 			"sub_path": "filament/FusRock/FusRock S-PAHT @G3U 0.6 Nozzle.json"
 		},
+		{
+			"name": "Generic PETG @FF AD5M 0.25 Nozzle",
+			"sub_path": "filament/Generic PETG @FF AD5M 0.25 Nozzle.json"
+		},
 		{
 			"name": "Generic PETG @Flashforge AD4",
 			"sub_path": "filament/Generic PETG @Flashforge AD4.json"
 		},
+		{
+			"name": "Generic PETG @Flashforge G3U",
+			"sub_path": "filament/Generic PETG @Flashforge G3U.json"
+		},
+		{
+			"name": "Generic PETG @Flashforge G3U 0.6 Nozzle",
+			"sub_path": "filament/Generic PETG @Flashforge G3U 0.6 Nozzle.json"
+		},
+		{
+			"name": "Generic PETG @Flashforge G3U 0.8 Nozzle",
+			"sub_path": "filament/Generic PETG @Flashforge G3U 0.8 Nozzle.json"
+		},
+		{
+			"name": "Generic PETG-CF @Flashforge G3U",
+			"sub_path": "filament/Generic PETG-CF @Flashforge G3U.json"
+		},
+		{
+			"name": "Generic PETG-CF @Flashforge G3U 0.6 Nozzle",
+			"sub_path": "filament/Generic PETG-CF @Flashforge G3U 0.6 Nozzle.json"
+		},
+		{
+			"name": "Generic PETG-CF @Flashforge G3U 0.8 Nozzle",
+			"sub_path": "filament/Generic PETG-CF @Flashforge G3U 0.8 Nozzle.json"
+		},
 		{
 			"name": "Flashforge PETG-CF",
 			"sub_path": "filament/Flashforge PETG-CF.json"
@@ -945,10 +945,6 @@
 			"name": "SUNLU PETG @FF AD5M 0.8 Nozzle",
 			"sub_path": "filament/SUNLU/SUNLU PETG @FF AD5M 0.8 nozzle.json"
 		},
-		{
-			"name": "Generic HS PLA @FF AD5M 0.25 Nozzle",
-			"sub_path": "filament/Generic HS PLA @FF AD5M 0.25 Nozzle.json"
-		},
 		{
 			"name": "Flashforge HIPS @FF G4",
 			"sub_path": "filament/Flashforge HIPS @FF G4.json"
@@ -1049,42 +1045,14 @@
 			"name": "Flashforge PLA-CF @FF G4P",
 			"sub_path": "filament/Flashforge PLA-CF @FF G4P.json"
 		},
+		{
+			"name": "Generic HS PLA @FF AD5M 0.25 Nozzle",
+			"sub_path": "filament/Generic HS PLA @FF AD5M 0.25 Nozzle.json"
+		},
 		{
 			"name": "Generic PLA High Speed @Flashforge AD4",
 			"sub_path": "filament/Generic PLA High Speed @Flashforge AD4.json"
 		},
-		{
-			"name": "Generic PLA @FF AD5M 0.25 Nozzle",
-			"sub_path": "filament/Generic PLA @FF AD5M 0.25 Nozzle.json"
-		},
-		{
-			"name": "Generic PLA @Flashforge G3U",
-			"sub_path": "filament/Generic PLA @Flashforge G3U.json"
-		},
-		{
-			"name": "Generic PLA @Flashforge G3U 0.6 Nozzle",
-			"sub_path": "filament/Generic PLA @Flashforge G3U 0.6 Nozzle.json"
-		},
-		{
-			"name": "Generic PLA @Flashforge G3U 0.8 Nozzle",
-			"sub_path": "filament/Generic PLA @Flashforge G3U 0.8 Nozzle.json"
-		},
-		{
-			"name": "Generic PLA-CF @Flashforge G3U",
-			"sub_path": "filament/Generic PLA-CF @Flashforge G3U.json"
-		},
-		{
-			"name": "Generic PLA-CF @Flashforge G3U 0.6 Nozzle",
-			"sub_path": "filament/Generic PLA-CF @Flashforge G3U 0.6 Nozzle.json"
-		},
-		{
-			"name": "Generic PLA-CF @Flashforge G3U 0.8 Nozzle",
-			"sub_path": "filament/Generic PLA-CF @Flashforge G3U 0.8 Nozzle.json"
-		},
-		{
-			"name": "Generic PVA @Flashforge",
-			"sub_path": "filament/Generic PVA @Flashforge.json"
-		},
 		{
 			"name": "Flashforge HS PLA",
 			"sub_path": "filament/Flashforge HS PLA.json"
@@ -1233,10 +1201,42 @@
 			"name": "Flashforge PLA Sparkle @FF AD5X 0.8 nozzle",
 			"sub_path": "filament/Flashforge PLA Sparkle @FF AD5X 0.8 nozzle.json"
 		},
+		{
+			"name": "Generic PLA @FF AD5M 0.25 Nozzle",
+			"sub_path": "filament/Generic PLA @FF AD5M 0.25 Nozzle.json"
+		},
 		{
 			"name": "Generic PLA @Flashforge AD4",
 			"sub_path": "filament/Generic PLA @Flashforge AD4.json"
 		},
+		{
+			"name": "Generic PLA @Flashforge G3U",
+			"sub_path": "filament/Generic PLA @Flashforge G3U.json"
+		},
+		{
+			"name": "Generic PLA @Flashforge G3U 0.6 Nozzle",
+			"sub_path": "filament/Generic PLA @Flashforge G3U 0.6 Nozzle.json"
+		},
+		{
+			"name": "Generic PLA @Flashforge G3U 0.8 Nozzle",
+			"sub_path": "filament/Generic PLA @Flashforge G3U 0.8 Nozzle.json"
+		},
+		{
+			"name": "Generic PLA-CF @Flashforge G3U",
+			"sub_path": "filament/Generic PLA-CF @Flashforge G3U.json"
+		},
+		{
+			"name": "Generic PLA-CF @Flashforge G3U 0.6 Nozzle",
+			"sub_path": "filament/Generic PLA-CF @Flashforge G3U 0.6 Nozzle.json"
+		},
+		{
+			"name": "Generic PLA-CF @Flashforge G3U 0.8 Nozzle",
+			"sub_path": "filament/Generic PLA-CF @Flashforge G3U 0.8 Nozzle.json"
+		},
+		{
+			"name": "Generic PVA @Flashforge",
+			"sub_path": "filament/Generic PVA @Flashforge.json"
+		},
 		{
 			"name": "Polymaker CoPA",
 			"sub_path": "filament/Polymaker/Polymaker CoPA.json"
@@ -1297,10 +1297,6 @@
 			"name": "Generic PLA-CF10 @Flashforge AD4",
 			"sub_path": "filament/Generic PLA-CF10 @Flashforge AD4.json"
 		},
-		{
-			"name": "Generic PLA-SILK @FF AD5M 0.25 Nozzle",
-			"sub_path": "filament/Generic PLA-SILK @FF AD5M 0.25 Nozzle.json"
-		},
 		{
 			"name": "Flashforge PLA Silk",
 			"sub_path": "filament/Flashforge PLA Silk.json"
@@ -1325,6 +1321,10 @@
 			"name": "Generic PLA Silk @Flashforge AD4",
 			"sub_path": "filament/Generic PLA Silk @Flashforge AD4.json"
 		},
+		{
+			"name": "Generic PLA-SILK @FF AD5M 0.25 Nozzle",
+			"sub_path": "filament/Generic PLA-SILK @FF AD5M 0.25 Nozzle.json"
+		},
 		{
 			"name": "SUNLU PLA Marble @FF AD3",
 			"sub_path": "filament/SUNLU/SUNLU PLA Marble @FF AD3.json"
@@ -1709,102 +1709,6 @@
 			"name": "Flashforge ASA Basic @FF AD5X 0.25 nozzle",
 			"sub_path": "filament/Flashforge ASA Basic @FF AD5X 0.25 nozzle.json"
 		},
-		{
-			"name": "Flashforge HS PETG @FF G4 0.6 HF nozzle",
-			"sub_path": "filament/Flashforge HS PETG @FF G4 0.6 HF nozzle.json"
-		},
-		{
-			"name": "Flashforge HS PETG @FF G4 0.6 nozzle",
-			"sub_path": "filament/Flashforge HS PETG @FF G4 0.6 nozzle.json"
-		},
-		{
-			"name": "Flashforge HS PETG @FF G4 0.8 HF nozzle",
-			"sub_path": "filament/Flashforge HS PETG @FF G4 0.8 HF nozzle.json"
-		},
-		{
-			"name": "Flashforge HS PETG @FF G4P 0.6 HF nozzle",
-			"sub_path": "filament/Flashforge HS PETG @FF G4P 0.6 HF nozzle.json"
-		},
-		{
-			"name": "Flashforge HS PETG @FF G4P 0.6 nozzle",
-			"sub_path": "filament/Flashforge HS PETG @FF G4P 0.6 nozzle.json"
-		},
-		{
-			"name": "Flashforge HS PETG @FF G4P 0.8 HF nozzle",
-			"sub_path": "filament/Flashforge HS PETG @FF G4P 0.8 HF nozzle.json"
-		},
-		{
-			"name": "Flashforge PETG Pro @FF G4 0.6 HF nozzle",
-			"sub_path": "filament/Flashforge PETG Pro @FF G4 0.6 HF nozzle.json"
-		},
-		{
-			"name": "Flashforge PETG Pro @FF G4 0.6 nozzle",
-			"sub_path": "filament/Flashforge PETG Pro @FF G4 0.6 nozzle.json"
-		},
-		{
-			"name": "Flashforge PETG Pro @FF G4 0.8 HF nozzle",
-			"sub_path": "filament/Flashforge PETG Pro @FF G4 0.8 HF nozzle.json"
-		},
-		{
-			"name": "Flashforge PETG Pro @FF G4P 0.6 HF nozzle",
-			"sub_path": "filament/Flashforge PETG Pro @FF G4P 0.6 HF nozzle.json"
-		},
-		{
-			"name": "Flashforge PETG Pro @FF G4P 0.6 nozzle",
-			"sub_path": "filament/Flashforge PETG Pro @FF G4P 0.6 nozzle.json"
-		},
-		{
-			"name": "Flashforge PETG Pro @FF G4P 0.8 HF nozzle",
-			"sub_path": "filament/Flashforge PETG Pro @FF G4P 0.8 HF nozzle.json"
-		},
-		{
-			"name": "Flashforge PETG Transparent @FF G4 0.6 HF nozzle",
-			"sub_path": "filament/Flashforge PETG Transparent @FF G4 0.6 HF nozzle.json"
-		},
-		{
-			"name": "Flashforge PETG Transparent @FF G4 0.6 nozzle",
-			"sub_path": "filament/Flashforge PETG Transparent @FF G4 0.6 nozzle.json"
-		},
-		{
-			"name": "Flashforge PETG Transparent @FF G4 0.8 HF nozzle",
-			"sub_path": "filament/Flashforge PETG Transparent @FF G4 0.8 HF nozzle.json"
-		},
-		{
-			"name": "Flashforge PETG Transparent @FF G4P 0.6 HF nozzle",
-			"sub_path": "filament/Flashforge PETG Transparent @FF G4P 0.6 HF nozzle.json"
-		},
-		{
-			"name": "Flashforge PETG Transparent @FF G4P 0.6 nozzle",
-			"sub_path": "filament/Flashforge PETG Transparent @FF G4P 0.6 nozzle.json"
-		},
-		{
-			"name": "Flashforge PETG Transparent @FF G4P 0.8 HF nozzle",
-			"sub_path": "filament/Flashforge PETG Transparent @FF G4P 0.8 HF nozzle.json"
-		},
-		{
-			"name": "Flashforge TPU 65D @FF G4 0.6 HF nozzle",
-			"sub_path": "filament/Flashforge TPU 65D @FF G4 0.6 HF nozzle.json"
-		},
-		{
-			"name": "Flashforge TPU 65D @FF G4P 0.6 HF nozzle",
-			"sub_path": "filament/Flashforge TPU 65D @FF G4P 0.6 HF nozzle.json"
-		},
-		{
-			"name": "Flashforge TPU 95A @FF G4 0.6 HF nozzle",
-			"sub_path": "filament/Flashforge TPU 95A @FF G4 0.6 HF nozzle.json"
-		},
-		{
-			"name": "Flashforge TPU 95A @FF G4P 0.6 HF nozzle",
-			"sub_path": "filament/Flashforge TPU 95A @FF G4P 0.6 HF nozzle.json"
-		},
-		{
-			"name": "Flashforge PETG-CF @FF G4 0.6 nozzle",
-			"sub_path": "filament/Flashforge PETG-CF @FF G4 0.6 nozzle.json"
-		},
-		{
-			"name": "Flashforge PETG-CF @FF G4P 0.6 nozzle",
-			"sub_path": "filament/Flashforge PETG-CF @FF G4P 0.6 nozzle.json"
-		},
 		{
 			"name": "Flashforge HS PETG @FF AD5M 0.25 nozzle",
 			"sub_path": "filament/Flashforge HS PETG @FF AD5M 0.25 nozzle.json"
@@ -2045,6 +1949,254 @@
 			"name": "Polymaker CoPA @FF G4P 0.8 HF nozzle",
 			"sub_path": "filament/Polymaker CoPA @FF G4P 0.8 HF nozzle.json"
 		},
+		{
+			"name": "Flashforge HS PETG @FF G4 0.6 HF nozzle",
+			"sub_path": "filament/Flashforge HS PETG @FF G4 0.6 HF nozzle.json"
+		},
+		{
+			"name": "Flashforge HS PETG @FF G4 0.6 nozzle",
+			"sub_path": "filament/Flashforge HS PETG @FF G4 0.6 nozzle.json"
+		},
+		{
+			"name": "Flashforge HS PETG @FF G4 0.8 HF nozzle",
+			"sub_path": "filament/Flashforge HS PETG @FF G4 0.8 HF nozzle.json"
+		},
+		{
+			"name": "Flashforge HS PETG @FF G4P 0.6 HF nozzle",
+			"sub_path": "filament/Flashforge HS PETG @FF G4P 0.6 HF nozzle.json"
+		},
+		{
+			"name": "Flashforge HS PETG @FF G4P 0.6 nozzle",
+			"sub_path": "filament/Flashforge HS PETG @FF G4P 0.6 nozzle.json"
+		},
+		{
+			"name": "Flashforge HS PETG @FF G4P 0.8 HF nozzle",
+			"sub_path": "filament/Flashforge HS PETG @FF G4P 0.8 HF nozzle.json"
+		},
+		{
+			"name": "Flashforge PETG Pro @FF G4 0.6 HF nozzle",
+			"sub_path": "filament/Flashforge PETG Pro @FF G4 0.6 HF nozzle.json"
+		},
+		{
+			"name": "Flashforge PETG Pro @FF G4 0.6 nozzle",
+			"sub_path": "filament/Flashforge PETG Pro @FF G4 0.6 nozzle.json"
+		},
+		{
+			"name": "Flashforge PETG Pro @FF G4 0.8 HF nozzle",
+			"sub_path": "filament/Flashforge PETG Pro @FF G4 0.8 HF nozzle.json"
+		},
+		{
+			"name": "Flashforge PETG Pro @FF G4P 0.6 HF nozzle",
+			"sub_path": "filament/Flashforge PETG Pro @FF G4P 0.6 HF nozzle.json"
+		},
+		{
+			"name": "Flashforge PETG Pro @FF G4P 0.6 nozzle",
+			"sub_path": "filament/Flashforge PETG Pro @FF G4P 0.6 nozzle.json"
+		},
+		{
+			"name": "Flashforge PETG Pro @FF G4P 0.8 HF nozzle",
+			"sub_path": "filament/Flashforge PETG Pro @FF G4P 0.8 HF nozzle.json"
+		},
+		{
+			"name": "Flashforge PETG Transparent @FF G4 0.6 HF nozzle",
+			"sub_path": "filament/Flashforge PETG Transparent @FF G4 0.6 HF nozzle.json"
+		},
+		{
+			"name": "Flashforge PETG Transparent @FF G4 0.6 nozzle",
+			"sub_path": "filament/Flashforge PETG Transparent @FF G4 0.6 nozzle.json"
+		},
+		{
+			"name": "Flashforge PETG Transparent @FF G4 0.8 HF nozzle",
+			"sub_path": "filament/Flashforge PETG Transparent @FF G4 0.8 HF nozzle.json"
+		},
+		{
+			"name": "Flashforge PETG Transparent @FF G4P 0.6 HF nozzle",
+			"sub_path": "filament/Flashforge PETG Transparent @FF G4P 0.6 HF nozzle.json"
+		},
+		{
+			"name": "Flashforge PETG Transparent @FF G4P 0.6 nozzle",
+			"sub_path": "filament/Flashforge PETG Transparent @FF G4P 0.6 nozzle.json"
+		},
+		{
+			"name": "Flashforge PETG Transparent @FF G4P 0.8 HF nozzle",
+			"sub_path": "filament/Flashforge PETG Transparent @FF G4P 0.8 HF nozzle.json"
+		},
+		{
+			"name": "Flashforge TPU 65D @FF G4 0.6 HF nozzle",
+			"sub_path": "filament/Flashforge TPU 65D @FF G4 0.6 HF nozzle.json"
+		},
+		{
+			"name": "Flashforge TPU 65D @FF G4P 0.6 HF nozzle",
+			"sub_path": "filament/Flashforge TPU 65D @FF G4P 0.6 HF nozzle.json"
+		},
+		{
+			"name": "Flashforge TPU 95A @FF G4 0.6 HF nozzle",
+			"sub_path": "filament/Flashforge TPU 95A @FF G4 0.6 HF nozzle.json"
+		},
+		{
+			"name": "Flashforge TPU 95A @FF G4P 0.6 HF nozzle",
+			"sub_path": "filament/Flashforge TPU 95A @FF G4P 0.6 HF nozzle.json"
+		},
+		{
+			"name": "Flashforge PETG-CF @FF G4 0.6 nozzle",
+			"sub_path": "filament/Flashforge PETG-CF @FF G4 0.6 nozzle.json"
+		},
+		{
+			"name": "Flashforge PETG-CF @FF G4P 0.6 nozzle",
+			"sub_path": "filament/Flashforge PETG-CF @FF G4P 0.6 nozzle.json"
+		},
+		{
+			"name": "Flashforge HS PLA @FF AD5X 0.25 nozzle",
+			"sub_path": "filament/Flashforge HS PLA @FF AD5X 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge HS PLA @FF G4 0.25 nozzle",
+			"sub_path": "filament/Flashforge HS PLA @FF G4 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge HS PLA @FF G4P 0.25 nozzle",
+			"sub_path": "filament/Flashforge HS PLA @FF G4P 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Basic @FF AD5M 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Basic @FF AD5M 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Basic @FF AD5X 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Basic @FF AD5X 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Basic @FF G4 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Basic @FF G4 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Basic @FF G4P 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Basic @FF G4P 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Color Change @FF AD5M 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Color Change @FF AD5M 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Color Change @FF AD5X 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Color Change @FF AD5X 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Color Change @FF G4 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Color Change @FF G4 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Color Change @FF G4P 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Color Change @FF G4P 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Galaxy @FF AD5M 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Galaxy @FF AD5M 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Galaxy @FF AD5X 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Galaxy @FF AD5X 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Galaxy @FF G4 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Galaxy @FF G4 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Galaxy @FF G4P 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Galaxy @FF G4P 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Luminous @FF AD5M 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Luminous @FF AD5M 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Luminous @FF AD5X 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Luminous @FF AD5X 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Luminous @FF G4 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Luminous @FF G4 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Luminous @FF G4P 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Luminous @FF G4P 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Matte @FF AD5M 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Matte @FF AD5M 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Matte @FF AD5X 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Matte @FF AD5X 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Matte @FF G4 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Matte @FF G4 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Matte @FF G4P 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Matte @FF G4P 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Metal @FF AD5M 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Metal @FF AD5M 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Metal @FF AD5X 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Metal @FF AD5X 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Metal @FF G4 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Metal @FF G4 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Metal @FF G4P 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Metal @FF G4P 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Pro @FF AD5M 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Pro @FF AD5M 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Pro @FF AD5X 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Pro @FF AD5X 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Pro @FF G4 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Pro @FF G4 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Pro @FF G4P 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Pro @FF G4P 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Silk @FF AD5X 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Silk @FF AD5X 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Silk @FF G4 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Silk @FF G4 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Silk @FF G4P 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Silk @FF G4P 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Sparkle @FF AD5M 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Sparkle @FF AD5M 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Sparkle @FF AD5X 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Sparkle @FF AD5X 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Sparkle @FF G4 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Sparkle @FF G4 0.25 nozzle.json"
+		},
+		{
+			"name": "Flashforge PLA Sparkle @FF G4P 0.25 nozzle",
+			"sub_path": "filament/Flashforge PLA Sparkle @FF G4P 0.25 nozzle.json"
+		},
 		{
 			"name": "Flashforge HS PLA @FF G4 0.6 HF nozzle",
 			"sub_path": "filament/Flashforge HS PLA @FF G4 0.6 HF nozzle.json"
@@ -2341,158 +2493,6 @@
 			"name": "Flashforge PLA-CF @FF G4P 0.6 nozzle",
 			"sub_path": "filament/Flashforge PLA-CF @FF G4P 0.6 nozzle.json"
 		},
-		{
-			"name": "Flashforge HS PLA @FF AD5X 0.25 nozzle",
-			"sub_path": "filament/Flashforge HS PLA @FF AD5X 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge HS PLA @FF G4 0.25 nozzle",
-			"sub_path": "filament/Flashforge HS PLA @FF G4 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge HS PLA @FF G4P 0.25 nozzle",
-			"sub_path": "filament/Flashforge HS PLA @FF G4P 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Basic @FF AD5M 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Basic @FF AD5M 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Basic @FF AD5X 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Basic @FF AD5X 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Basic @FF G4 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Basic @FF G4 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Basic @FF G4P 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Basic @FF G4P 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Color Change @FF AD5M 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Color Change @FF AD5M 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Color Change @FF AD5X 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Color Change @FF AD5X 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Color Change @FF G4 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Color Change @FF G4 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Color Change @FF G4P 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Color Change @FF G4P 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Galaxy @FF AD5M 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Galaxy @FF AD5M 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Galaxy @FF AD5X 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Galaxy @FF AD5X 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Galaxy @FF G4 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Galaxy @FF G4 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Galaxy @FF G4P 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Galaxy @FF G4P 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Luminous @FF AD5M 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Luminous @FF AD5M 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Luminous @FF AD5X 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Luminous @FF AD5X 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Luminous @FF G4 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Luminous @FF G4 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Luminous @FF G4P 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Luminous @FF G4P 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Matte @FF AD5M 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Matte @FF AD5M 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Matte @FF AD5X 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Matte @FF AD5X 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Matte @FF G4 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Matte @FF G4 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Matte @FF G4P 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Matte @FF G4P 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Metal @FF AD5M 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Metal @FF AD5M 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Metal @FF AD5X 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Metal @FF AD5X 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Metal @FF G4 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Metal @FF G4 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Metal @FF G4P 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Metal @FF G4P 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Pro @FF AD5M 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Pro @FF AD5M 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Pro @FF AD5X 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Pro @FF AD5X 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Pro @FF G4 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Pro @FF G4 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Pro @FF G4P 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Pro @FF G4P 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Silk @FF AD5X 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Silk @FF AD5X 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Silk @FF G4 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Silk @FF G4 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Silk @FF G4P 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Silk @FF G4P 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Sparkle @FF AD5M 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Sparkle @FF AD5M 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Sparkle @FF AD5X 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Sparkle @FF AD5X 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Sparkle @FF G4 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Sparkle @FF G4 0.25 nozzle.json"
-		},
-		{
-			"name": "Flashforge PLA Sparkle @FF G4P 0.25 nozzle",
-			"sub_path": "filament/Flashforge PLA Sparkle @FF G4P 0.25 nozzle.json"
-		},
 		{
 			"name": "Flashforge PLA Silk @FF AD5M 0.25 nozzle",
 			"sub_path": "filament/Flashforge PLA Silk @FF AD5M 0.25 nozzle.json"
@@ -2601,30 +2601,6 @@
 			"name": "Flashforge PETG-CF @FF C5P",
 			"sub_path": "filament/Flashforge PETG-CF @FF C5P.json"
 		},
-		{
-			"name": "Flashforge PLA Matte @FF C5",
-			"sub_path": "filament/Flashforge PLA Matte @FF C5.json"
-		},
-		{
-			"name": "Flashforge PLA Matte @FF C5P",
-			"sub_path": "filament/Flashforge PLA Matte @FF C5P.json"
-		},
-		{
-			"name": "Flashforge PLA Metal @FF C5",
-			"sub_path": "filament/Flashforge PLA Metal @FF C5.json"
-		},
-		{
-			"name": "Flashforge PLA Metal @FF C5P",
-			"sub_path": "filament/Flashforge PLA Metal @FF C5P.json"
-		},
-		{
-			"name": "Flashforge PLA Pro @FF C5",
-			"sub_path": "filament/Flashforge PLA Pro @FF C5.json"
-		},
-		{
-			"name": "Flashforge PLA Pro @FF C5P",
-			"sub_path": "filament/Flashforge PLA Pro @FF C5P.json"
-		},
 		{
 			"name": "Flashforge PLA Basic @FF C5",
 			"sub_path": "filament/Flashforge PLA Basic @FF C5.json"
@@ -2657,6 +2633,30 @@
 			"name": "Flashforge PLA Luminous @FF C5P",
 			"sub_path": "filament/Flashforge PLA Luminous @FF C5P.json"
 		},
+		{
+			"name": "Flashforge PLA Matte @FF C5",
+			"sub_path": "filament/Flashforge PLA Matte @FF C5.json"
+		},
+		{
+			"name": "Flashforge PLA Matte @FF C5P",
+			"sub_path": "filament/Flashforge PLA Matte @FF C5P.json"
+		},
+		{
+			"name": "Flashforge PLA Metal @FF C5",
+			"sub_path": "filament/Flashforge PLA Metal @FF C5.json"
+		},
+		{
+			"name": "Flashforge PLA Metal @FF C5P",
+			"sub_path": "filament/Flashforge PLA Metal @FF C5P.json"
+		},
+		{
+			"name": "Flashforge PLA Pro @FF C5",
+			"sub_path": "filament/Flashforge PLA Pro @FF C5.json"
+		},
+		{
+			"name": "Flashforge PLA Pro @FF C5P",
+			"sub_path": "filament/Flashforge PLA Pro @FF C5P.json"
+		},
 		{
 			"name": "Flashforge PLA Silk @FF C5",
 			"sub_path": "filament/Flashforge PLA Silk @FF C5.json"

resources/profiles/InfiMech.json

@@ -1,6 +1,6 @@
 {
 	"name": "InfiMech",
-	"version": "02.04.00.03",
+	"version": "02.04.00.04",
 	"force_update": "1",
 	"description": "InfiMech configurations",
 	"machine_model_list": [
@@ -476,11 +476,11 @@
 	"machine_list": [
 		{
 			"name": "fdm_machine_common",
-			"sub_path": "machine/HSN/fdm_machine_common.json"
+			"sub_path": "machine/fdm_machine_common.json"
 		},
 		{
 			"name": "fdm_klipper_common",
-			"sub_path": "machine/HSN/fdm_klipper_common.json"
+			"sub_path": "machine/fdm_klipper_common.json"
 		},
 		{
 			"name": "InfiMech EX 0.4 nozzle",

resources/profiles/InfiMech/machine/HSN/fdm_klipper_common.json

@@ -1,201 +0,0 @@
-{
-	"type": "machine",
-	"name": "fdm_klipper_common",
-	"inherits": "fdm_machine_common",
-	"from": "system",
-	"instantiation": "false",
-	"gcode_flavor": "klipper",
-	"auxiliary_fan": "1",
-	"bed_exclude_area": [
-		"0x0"
-	],
-	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0",
-	"change_filament_gcode": "",
-	"cooling_tube_length": "5",
-	"cooling_tube_retraction": "91.5",
-	"default_filament_profile": [
-		"Generic PLA @InfiMech"
-	],
-	"default_print_profile": "0.20mm Standard @InfiMech TX",
-	"deretraction_speed": [
-		"30"
-	],
-	"enable_filament_ramming": "1",
-	"extra_loading_move": "-2",
-	"extruder_clearance_height_to_lid": "69",
-	"extruder_clearance_height_to_rod": "69",
-	"extruder_clearance_radius": "49",
-	"extruder_colour": [
-		"#FCE94F"
-	],
-	"extruder_offset": [
-		"0x0"
-	],
-	"fan_kickstart": "0",
-	"fan_speedup_overhangs": "1",
-	"fan_speedup_time": "0",
-	"high_current_on_filament_swap": "0",
-	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
-	"machine_end_gcode": "PRINT_END",
-	"machine_load_filament_time": "0",
-	"machine_max_acceleration_e": [
-		"5000",
-		"5000"
-	],
-	"machine_max_acceleration_extruding": [
-		"20000",
-		"20000"
-	],
-	"machine_max_acceleration_retracting": [
-		"5000",
-		"5000"
-	],
-	"machine_max_acceleration_travel": [
-		"20000",
-		"20000"
-	],
-	"machine_max_acceleration_x": [
-		"20000",
-		"20000"
-	],
-	"machine_max_acceleration_y": [
-		"20000",
-		"20000"
-	],
-	"machine_max_acceleration_z": [
-		"500",
-		"200"
-	],
-	"machine_max_jerk_e": [
-		"2.5",
-		"2.5"
-	],
-	"machine_max_jerk_x": [
-		"9",
-		"9"
-	],
-	"machine_max_jerk_y": [
-		"9",
-		"9"
-	],
-	"machine_max_jerk_z": [
-		"3",
-		"0.4"
-	],
-	"machine_max_speed_e": [
-		"30",
-		"25"
-	],
-	"machine_max_speed_x": [
-		"600",
-		"200"
-	],
-	"machine_max_speed_y": [
-		"600",
-		"200"
-	],
-	"machine_max_speed_z": [
-		"20",
-		"12"
-	],
-	"machine_min_extruding_rate": [
-		"0",
-		"0"
-	],
-	"machine_min_travel_rate": [
-		"0",
-		"0"
-	],
-	"machine_pause_gcode": "PAUSE",
-	"machine_start_gcode": ";v2.9.2-20240814;\n;wiping nozzle start\nM106 P3 S0\nM140 S[bed_temperature_initial_layer_single]\nclean_nozzle_position\n;wiping nozzle end\n;*************preheat nozzle and hotbed for Z_TILT_ADJUST*************\nM140 S[bed_temperature_initial_layer_single]\nM104 S130\nG1 X110 Y110 F10000 \nG4 P200\nprobe\nSET_KINEMATIC_POSITION Z=0 ;Z homing\nG1 Z5\nM190 S[bed_temperature_initial_layer_single]\nZ_TILT_ADJUST \n;*************Z_TILT_ADJUST end*************\nM140 S[bed_temperature_initial_layer_single] ;heat hotbed temp set by user\nG1 X5 Y5 F8000 \nG28 \nG1 X{first_layer_print_min[0]-1.5} Y{min(first_layer_print_min[1] + 100,print_bed_max[0])} F6000 \nG1 Z0 F400\nM104 S[nozzle_temperature_initial_layer] ;heat nozzle temp set by user\nM106 S100 ;close head_nozzle fan\nG4 P3000\nM106 S255 ;close head_nozzle fan\nG4 P3000\nM106 S100 ;close head_nozzle fan\n;*************PRINT START*************\nM109 S[nozzle_temperature_initial_layer] ;heat nozzle temp set by user and wait \nM190 S[bed_temperature_initial_layer_single];heat bed temp set by user and wait \nM106 S0 ;close head_nozzle fan\nBED_MESH_CLEAR                                  \nBED_MESH_PROFILE LOAD=default   # bedmesh load\nG92 E0 ;Reset Extruder\n;G1 Z4.0 F200 ;Move Z Axis up\nG90 ;absolute position\n ; ; ; ; ; ; ; ; ; draw line along model\n;G92 E0 ;reset extruder\nG1 E3 F300 ;extrude filament\nG1 X{first_layer_print_min[0]-1.5} Y{min(first_layer_print_min[1] + 100,print_bed_max[0])} F6000 \nG1 Z0.22 F600\nG1 X{first_layer_print_min[0]-1.5} Y{max(0, first_layer_print_min[1]-1.5)}  F2000 E10\nG1 Z0.22 F600\nG1 X{min(first_layer_print_min[0] + 60,print_bed_max[0])} F1200 E12\n ; ; ; ; ; ; ; ; ;draw line along model end \nG4 P200\nG1 Z2\nG92 E0 ;Reset Extruder\nCLEAR_PAUSE\n;***********model start************\n",
-	"machine_unload_filament_time": "0",
-	"max_layer_height": [
-		"0.28"
-	],
-	"min_layer_height": [
-		"0.08"
-	],
-	"nozzle_diameter": [
-		"0.4"
-	],
-	"nozzle_hrc": "0",
-	"nozzle_type": "hardened_steel",
-	"nozzle_volume": "151.32",
-	"parking_pos_retraction": "92",
-	"print_host_webui": "",
-	"printable_area": [
-		"0x0",
-		"220x0",
-		"220x220",
-		"0x220"
-	],
-	"printable_height": "250",
-	"printer_model": "Generic Klipper Printer",
-	"printer_notes": "",
-	"printer_settings_id": "InfiMech TX 0.4 nozzle",
-	"printer_technology": "FFF",
-	"printer_variant": "0.4",
-	"printhost_apikey": "",
-	"printhost_authorization_type": "key",
-	"printhost_cafile": "",
-	"printhost_password": "",
-	"printhost_port": "",
-	"printhost_ssl_ignore_revoke": "0",
-	"printhost_user": "",
-	"purge_in_prime_tower": "1",
-	"retract_before_wipe": [
-		"0%"
-	],
-	"retract_length_toolchange": [
-		"0"
-	],
-	"retract_lift_above": [
-		"0"
-	],
-	"retract_lift_below": [
-		"249"
-	],
-	"retract_lift_enforce": [
-		"All Surfaces"
-	],
-	"retract_restart_extra": [
-		"0"
-	],
-	"retract_restart_extra_toolchange": [
-		"0"
-	],
-	"retract_when_changing_layer": [
-		"1"
-	],
-	"retraction_length": [
-		"0.5"
-	],
-	"retraction_minimum_travel": [
-		"1"
-	],
-	"retraction_speed": [
-		"30"
-	],
-	"scan_first_layer": "0",
-	"silent_mode": "0",
-	"single_extruder_multi_material": "1",
-	"template_custom_gcode": "",
-	"thumbnails": [
-		"300x300"
-	],
-	"upward_compatible_machine": [],
-	"use_firmware_retraction": "0",
-	"use_relative_e_distances": "1",
-	"wipe": [
-		"1"
-	],
-	"wipe_distance": [
-		"2"
-	],
-	"z_hop": [
-		"0.4"
-	],
-	"z_hop_types": [
-		"Normal Lift"
-	]
-}

resources/profiles/InfiMech/machine/HSN/fdm_machine_common.json

@@ -1,197 +0,0 @@
-{
-	"type": "machine",
-	"name": "fdm_machine_common",
-	"from": "system",
-	"instantiation": "false",
-	"printer_technology": "FFF",
-	"gcode_flavor": "klipper",
-	"auxiliary_fan": "1",
-	"bed_exclude_area": [
-		"0x0"
-	],
-	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0",
-	"change_filament_gcode": "",
-	"cooling_tube_length": "5",
-	"cooling_tube_retraction": "91.5",
-	"default_filament_profile": [
-		"Generic PLA @InfiMech"
-	],
-	"default_print_profile": "0.20mm Standard @InfiMech TX",
-	"deretraction_speed": [
-		"30"
-	],
-	"enable_filament_ramming": "1",
-	"extra_loading_move": "-2",
-	"extruder_clearance_height_to_lid": "69",
-	"extruder_clearance_height_to_rod": "69",
-	"extruder_clearance_radius": "49",
-	"extruder_colour": [
-		"#FCE94F"
-	],
-	"extruder_offset": [
-		"0x0"
-	],
-	"fan_kickstart": "0",
-	"fan_speedup_overhangs": "1",
-	"fan_speedup_time": "0",
-	"high_current_on_filament_swap": "0",
-	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
-	"machine_end_gcode": "PRINT_END",
-	"machine_load_filament_time": "0",
-	"machine_max_acceleration_e": [
-		"5000",
-		"5000"
-	],
-	"machine_max_acceleration_extruding": [
-		"20000",
-		"20000"
-	],
-	"machine_max_acceleration_retracting": [
-		"5000",
-		"5000"
-	],
-	"machine_max_acceleration_travel": [
-		"9000",
-		"9000"
-	],
-	"machine_max_acceleration_x": [
-		"20000",
-		"20000"
-	],
-	"machine_max_acceleration_y": [
-		"20000",
-		"20000"
-	],
-	"machine_max_acceleration_z": [
-		"500",
-		"200"
-	],
-	"machine_max_jerk_e": [
-		"2.5",
-		"2.5"
-	],
-	"machine_max_jerk_x": [
-		"9",
-		"9"
-	],
-	"machine_max_jerk_y": [
-		"9",
-		"9"
-	],
-	"machine_max_jerk_z": [
-		"3",
-		"0.4"
-	],
-	"machine_max_speed_e": [
-		"30",
-		"25"
-	],
-	"machine_max_speed_x": [
-		"600",
-		"200"
-	],
-	"machine_max_speed_y": [
-		"600",
-		"200"
-	],
-	"machine_max_speed_z": [
-		"20",
-		"12"
-	],
-	"machine_min_extruding_rate": [
-		"0",
-		"0"
-	],
-	"machine_min_travel_rate": [
-		"0",
-		"0"
-	],
-	"machine_pause_gcode": "PAUSE",
-	"machine_start_gcode": ";v2.9.2-20240814;\n;wiping nozzle start\nM106 P3 S0\nM140 S[bed_temperature_initial_layer_single]\nclean_nozzle_position\n;wiping nozzle end\n;*************preheat nozzle and hotbed for Z_TILT_ADJUST*************\nM140 S[bed_temperature_initial_layer_single]\nM104 S130\nG1 X110 Y110 F10000 \nG4 P200\nprobe\nSET_KINEMATIC_POSITION Z=0 ;Z homing\nG1 Z5\nM190 S[bed_temperature_initial_layer_single]\nZ_TILT_ADJUST \n;*************Z_TILT_ADJUST end*************\nM140 S[bed_temperature_initial_layer_single] ;heat hotbed temp set by user\nG1 X5 Y5 F8000 \nG28 \nG1 X{first_layer_print_min[0]-1.5} Y{min(first_layer_print_min[1] + 100,print_bed_max[0])} F6000 \nG1 Z0 F400\nM104 S[nozzle_temperature_initial_layer] ;heat nozzle temp set by user\nM106 S100 ;close head_nozzle fan\nG4 P3000\nM106 S255 ;close head_nozzle fan\nG4 P3000\nM106 S100 ;close head_nozzle fan\n;*************PRINT START*************\nM109 S[nozzle_temperature_initial_layer] ;heat nozzle temp set by user and wait \nM190 S[bed_temperature_initial_layer_single];heat bed temp set by user and wait \nM106 S0 ;close head_nozzle fan\nBED_MESH_CLEAR                                  \nBED_MESH_PROFILE LOAD=default   # bedmesh load\nG92 E0 ;Reset Extruder\n;G1 Z4.0 F200 ;Move Z Axis up\nG90 ;absolute position\n ; ; ; ; ; ; ; ; ; draw line along model\n;G92 E0 ;reset extruder\nG1 E3 F300 ;extrude filament\nG1 X{first_layer_print_min[0]-1.5} Y{min(first_layer_print_min[1] + 100,print_bed_max[0])} F6000 \nG1 Z0.22 F600\nG1 X{first_layer_print_min[0]-1.5} Y{max(0, first_layer_print_min[1]-1.5)}  F2000 E10\nG1 Z0.22 F600\nG1 X{min(first_layer_print_min[0] + 60,print_bed_max[0])} F1200 E12\n ; ; ; ; ; ; ; ; ;draw line along model end \nG4 P200\nG1 Z2\nG92 E0 ;Reset Extruder\nCLEAR_PAUSE\n;***********model start************\n",
-	"machine_unload_filament_time": "0",
-	"max_layer_height": [
-		"0.28"
-	],
-	"min_layer_height": [
-		"0.08"
-	],
-	"nozzle_hrc": "0",
-	"nozzle_type": "hardened_steel",
-	"nozzle_volume": "151.32",
-	"parking_pos_retraction": "92",
-	"print_host_webui": "",
-	"printable_area": [
-		"0x0",
-		"220x0",
-		"220x220",
-		"0x220"
-	],
-	"printable_height": "250",
-	"printer_model": "Generic Klipper Printer",
-	"printer_notes": "",
-	"printer_settings_id": "InfiMech TX 0.4 nozzle",
-	"printer_variant": "0.4",
-	"printhost_apikey": "",
-	"printhost_authorization_type": "key",
-	"printhost_cafile": "",
-	"printhost_password": "",
-	"printhost_port": "",
-	"printhost_ssl_ignore_revoke": "0",
-	"printhost_user": "",
-	"purge_in_prime_tower": "1",
-	"retract_before_wipe": [
-		"0%"
-	],
-	"retract_length_toolchange": [
-		"0"
-	],
-	"retract_lift_above": [
-		"0"
-	],
-	"retract_lift_below": [
-		"249"
-	],
-	"retract_lift_enforce": [
-		"All Surfaces"
-	],
-	"retract_restart_extra": [
-		"0"
-	],
-	"retract_restart_extra_toolchange": [
-		"0"
-	],
-	"retract_when_changing_layer": [
-		"1"
-	],
-	"retraction_length": [
-		"0.5"
-	],
-	"retraction_minimum_travel": [
-		"1"
-	],
-	"retraction_speed": [
-		"30"
-	],
-	"scan_first_layer": "0",
-	"silent_mode": "0",
-	"single_extruder_multi_material": "1",
-	"template_custom_gcode": "",
-	"thumbnails": [
-		"300x300"
-	],
-	"upward_compatible_machine": [],
-	"use_firmware_retraction": "0",
-	"use_relative_e_distances": "1",
-	"wipe": [
-		"1"
-	],
-	"wipe_distance": [
-		"2"
-	],
-	"z_hop": [
-		"0.4"
-	],
-	"z_hop_types": [
-		"Normal Lift"
-	]
-}

resources/profiles/InfiMech/machine/fdm_klipper_common.json

@@ -119,7 +119,7 @@
 		"0.4"
 	],
 	"nozzle_hrc": "0",
-	"nozzle_type": "brass",
+	"nozzle_type": "hardened_steel",
 	"nozzle_volume": "151.32",
 	"parking_pos_retraction": "92",
 	"print_host_webui": "",

resources/profiles/InfiMech/machine/fdm_machine_common.json

@@ -116,7 +116,7 @@
 		"0.08"
 	],
 	"nozzle_hrc": "0",
-	"nozzle_type": "brass",
+	"nozzle_type": "hardened_steel",
 	"nozzle_volume": "151.32",
 	"parking_pos_retraction": "92",
 	"print_host_webui": "",

resources/profiles/OrcaFilamentLibrary.json

@@ -68,258 +68,6 @@
 			"name": "fdm_filament_pla",
 			"sub_path": "filament/base/fdm_filament_pla.json"
 		},
-		{
-			"name": "FilAr PLA @base",
-			"sub_path": "filament/FilAr/FilAr PLA @base.json"
-		},
-		{
-			"name": "FilAr PLA Bronce",
-			"sub_path": "filament/FilAr/FilAr PLA Bronce.json"
-		},
-		{
-			"name": "FilAr PLA Gris Plata",
-			"sub_path": "filament/FilAr/FilAr PLA Gris Plata.json"
-		},
-		{
-			"name": "FilAr PLA Cobre",
-			"sub_path": "filament/FilAr/FilAr PLA Cobre.json"
-		},
-		{
-			"name": "FilAr PLA Titanio",
-			"sub_path": "filament/FilAr/FilAr PLA Titanio.json"
-		},
-		{
-			"name": "FilAr PLA Tabaco",
-			"sub_path": "filament/FilAr/FilAr PLA Tabaco.json"
-		},
-		{
-			"name": "FilAr PLA Cafe con Leche",
-			"sub_path": "filament/FilAr/FilAr PLA Cafe con Leche.json"
-		},
-		{
-			"name": "FilAr PLA Manteca",
-			"sub_path": "filament/FilAr/FilAr PLA Manteca.json"
-		},
-		{
-			"name": "FilAr PLA Marron Oxido",
-			"sub_path": "filament/FilAr/FilAr PLA Marron Oxido.json"
-		},
-		{
-			"name": "FilAr PLA Carpincho",
-			"sub_path": "filament/FilAr/FilAr PLA Carpincho.json"
-		},
-		{
-			"name": "FilAr PLA Rosa Amaranto",
-			"sub_path": "filament/FilAr/FilAr PLA Rosa Amaranto.json"
-		},
-		{
-			"name": "FilAr PLA Rosa Flamenco",
-			"sub_path": "filament/FilAr/FilAr PLA Rosa Flamenco.json"
-		},
-		{
-			"name": "FilAr PLA Piel",
-			"sub_path": "filament/FilAr/FilAr PLA Piel.json"
-		},
-		{
-			"name": "FilAr PLA Verde FilAr",
-			"sub_path": "filament/FilAr/FilAr PLA Verde FilAr.json"
-		},
-		{
-			"name": "FilAr PLA Verde Manzana",
-			"sub_path": "filament/FilAr/FilAr PLA Verde Manzana.json"
-		},
-		{
-			"name": "FilAr PLA Verde Pixel",
-			"sub_path": "filament/FilAr/FilAr PLA Verde Pixel.json"
-		},
-		{
-			"name": "FilAr PLA Verde Oliva",
-			"sub_path": "filament/FilAr/FilAr PLA Verde Oliva.json"
-		},
-		{
-			"name": "FilAr PLA Blanco Antartida",
-			"sub_path": "filament/FilAr/FilAr PLA Blanco Antartida.json"
-		},
-		{
-			"name": "FilAr PLA Blanco Calido",
-			"sub_path": "filament/FilAr/FilAr PLA Blanco Calido.json"
-		},
-		{
-			"name": "FilAr PLA Negro Azabache",
-			"sub_path": "filament/FilAr/FilAr PLA Negro Azabache.json"
-		},
-		{
-			"name": "FilAr PLA Naranja Tigre",
-			"sub_path": "filament/FilAr/FilAr PLA Naranja Tigre.json"
-		},
-		{
-			"name": "FilAr PLA Rojo de Carreras",
-			"sub_path": "filament/FilAr/FilAr PLA Rojo de Carreras.json"
-		},
-		{
-			"name": "FilAr PLA Amarillo Lirio",
-			"sub_path": "filament/FilAr/FilAr PLA Amarillo Lirio.json"
-		},
-		{
-			"name": "FilAr PLA Violeta Jacaranda",
-			"sub_path": "filament/FilAr/FilAr PLA Violeta Jacaranda.json"
-		},
-		{
-			"name": "FilAr PLA Gris Pizarra",
-			"sub_path": "filament/FilAr/FilAr PLA Gris Pizarra.json"
-		},
-		{
-			"name": "FilAr PLA Gris Ceniza",
-			"sub_path": "filament/FilAr/FilAr PLA Gris Ceniza.json"
-		},
-		{
-			"name": "FilAr PLA Azul Francia",
-			"sub_path": "filament/FilAr/FilAr PLA Azul Francia.json"
-		},
-		{
-			"name": "FilAr PLA Celeste Cielo",
-			"sub_path": "filament/FilAr/FilAr PLA Celeste Cielo.json"
-		},
-		{
-			"name": "FilAr PLA Oro",
-			"sub_path": "filament/FilAr/FilAr PLA Oro.json"
-		},
-		{
-			"name": "FilAr PLA Dorado",
-			"sub_path": "filament/FilAr/FilAr PLA Dorado.json"
-		},
-		{
-			"name": "FilAr PLA-mate @base",
-			"sub_path": "filament/FilAr/FilAr PLA-mate @base.json"
-		},
-		{
-			"name": "FilAr PLA-mate Amarillo",
-			"sub_path": "filament/FilAr/FilAr PLA-mate Amarillo.json"
-		},
-		{
-			"name": "FilAr PLA-mate Azul",
-			"sub_path": "filament/FilAr/FilAr PLA-mate Azul.json"
-		},
-		{
-			"name": "FilAr PLA-mate Beige",
-			"sub_path": "filament/FilAr/FilAr PLA-mate Beige.json"
-		},
-		{
-			"name": "FilAr PLA-mate Blanco",
-			"sub_path": "filament/FilAr/FilAr PLA-mate Blanco.json"
-		},
-		{
-			"name": "FilAr PLA-mate Bordo",
-			"sub_path": "filament/FilAr/FilAr PLA-mate Bordo.json"
-		},
-		{
-			"name": "FilAr PLA-mate Celeste Cielo",
-			"sub_path": "filament/FilAr/FilAr PLA-mate Celeste Cielo.json"
-		},
-		{
-			"name": "FilAr PLA-mate Chocolate",
-			"sub_path": "filament/FilAr/FilAr PLA-mate Chocolate.json"
-		},
-		{
-			"name": "FilAr PLA-mate Gris",
-			"sub_path": "filament/FilAr/FilAr PLA-mate Gris.json"
-		},
-		{
-			"name": "FilAr PLA-mate Marron",
-			"sub_path": "filament/FilAr/FilAr PLA-mate Marron.json"
-		},
-		{
-			"name": "FilAr PLA-mate Naranja",
-			"sub_path": "filament/FilAr/FilAr PLA-mate Naranja.json"
-		},
-		{
-			"name": "FilAr PLA-mate Negro",
-			"sub_path": "filament/FilAr/FilAr PLA-mate Negro.json"
-		},
-		{
-			"name": "FilAr PLA-mate Piel",
-			"sub_path": "filament/FilAr/FilAr PLA-mate Piel.json"
-		},
-		{
-			"name": "FilAr PLA-mate Rojo",
-			"sub_path": "filament/FilAr/FilAr PLA-mate Rojo.json"
-		},
-		{
-			"name": "FilAr PLA-mate Rosa",
-			"sub_path": "filament/FilAr/FilAr PLA-mate Rosa.json"
-		},
-		{
-			"name": "FilAr PLA-mate Uva",
-			"sub_path": "filament/FilAr/FilAr PLA-mate Uva.json"
-		},
-		{
-			"name": "FilAr PLA-mate Verde",
-			"sub_path": "filament/FilAr/FilAr PLA-mate Verde.json"
-		},
-		{
-			"name": "FilAr PLA-mate Violeta",
-			"sub_path": "filament/FilAr/FilAr PLA-mate Violeta.json"
-		},
-		{
-			"name": "FilAr PETG @base",
-			"sub_path": "filament/FilAr/FilAr PETG @base.json"
-		},
-		{
-			"name": "FilAr PETG Amarillo Lima",
-			"sub_path": "filament/FilAr/FilAr PETG Amarillo Lima.json"
-		},
-		{
-			"name": "FilAr PETG Amarillo Radiante",
-			"sub_path": "filament/FilAr/FilAr PETG Amarillo Radiante.json"
-		},
-		{
-			"name": "FilAr PETG Azul Boreal",
-			"sub_path": "filament/FilAr/FilAr PETG Azul Boreal.json"
-		},
-		{
-			"name": "FilAr PETG Azul Francia",
-			"sub_path": "filament/FilAr/FilAr PETG Azul Francia.json"
-		},
-		{
-			"name": "FilAr PETG Azul Imperial",
-			"sub_path": "filament/FilAr/FilAr PETG Azul Imperial.json"
-		},
-		{
-			"name": "FilAr PETG Blanco Antartida",
-			"sub_path": "filament/FilAr/FilAr PETG Blanco Antartida.json"
-		},
-		{
-			"name": "FilAr PETG Cian",
-			"sub_path": "filament/FilAr/FilAr PETG Cian.json"
-		},
-		{
-			"name": "FilAr PETG Coral",
-			"sub_path": "filament/FilAr/FilAr PETG Coral.json"
-		},
-		{
-			"name": "FilAr PETG Cristal",
-			"sub_path": "filament/FilAr/FilAr PETG Cristal.json"
-		},
-		{
-			"name": "FilAr PETG Gris Ceniza",
-			"sub_path": "filament/FilAr/FilAr PETG Gris Ceniza.json"
-		},
-		{
-			"name": "FilAr PETG Gris Plata",
-			"sub_path": "filament/FilAr/FilAr PETG Gris Plata.json"
-		},
-		{
-			"name": "FilAr PETG Magenta",
-			"sub_path": "filament/FilAr/FilAr PETG Magenta.json"
-		},
-		{
-			"name": "FilAr PETG Negro Azabache",
-			"sub_path": "filament/FilAr/FilAr PETG Negro Azabache.json"
-		},
-		{
-			"name": "FilAr PETG Rojo Carmesi",
-			"sub_path": "filament/FilAr/FilAr PETG Rojo Carmesi.json"
-		},
 		{
 			"name": "fdm_filament_pp",
 			"sub_path": "filament/base/fdm_filament_pp.json"
@@ -588,10 +336,6 @@
 			"name": "Generic PE-CF @base",
 			"sub_path": "filament/Generic PE-CF @base.json"
 		},
-		{
-			"name": "Generic PE-CF @System",
-			"sub_path": "filament/Generic PE-CF @System.json"
-		},
 		{
 			"name": "AliZ PETG @base",
 			"sub_path": "filament/AliZ/AliZ PETG @base.json"
@@ -672,6 +416,10 @@
 			"name": "Fiberon PETG-rCF @base",
 			"sub_path": "filament/Polymaker/Fiberon PETG-rCF @base.json"
 		},
+		{
+			"name": "FilAr PETG @base",
+			"sub_path": "filament/FilAr/FilAr PETG @base.json"
+		},
 		{
 			"name": "Generic PETG @System",
 			"sub_path": "filament/Generic PETG @System.json"
@@ -680,18 +428,10 @@
 			"name": "Generic PETG HF @base",
 			"sub_path": "filament/Generic PETG HF @base.json"
 		},
-		{
-			"name": "Generic PETG HF @System",
-			"sub_path": "filament/Generic PETG HF @System.json"
-		},
 		{
 			"name": "Generic PETG-CF @base",
 			"sub_path": "filament/Generic PETG-CF @base.json"
 		},
-		{
-			"name": "Generic PETG-CF @System",
-			"sub_path": "filament/Generic PETG-CF @System.json"
-		},
 		{
 			"name": "GreenGate3D PETG @base",
 			"sub_path": "filament/GreenGate3D/GreenGate3D PETG @base.json"
@@ -868,6 +608,14 @@
 			"name": "FILL3D PLA Turbo @base",
 			"sub_path": "filament/FILL3D/FILL3D PLA Turbo @base.json"
 		},
+		{
+			"name": "FilAr PLA @base",
+			"sub_path": "filament/FilAr/FilAr PLA @base.json"
+		},
+		{
+			"name": "FilAr PLA-mate @base",
+			"sub_path": "filament/FilAr/FilAr PLA-mate @base.json"
+		},
 		{
 			"name": "Generic PLA @System",
 			"sub_path": "filament/Generic PLA @System.json"
@@ -880,10 +628,6 @@
 			"name": "Generic PLA Matte @base",
 			"sub_path": "filament/Generic PLA Matte @base.json"
 		},
-		{
-			"name": "Generic PLA Matte @System",
-			"sub_path": "filament/Generic PLA Matte @System.json"
-		},
 		{
 			"name": "Generic PLA-CF @System",
 			"sub_path": "filament/Generic PLA-CF @System.json"
@@ -1092,18 +836,10 @@
 			"name": "Generic PP-CF @base",
 			"sub_path": "filament/Generic PP-CF @base.json"
 		},
-		{
-			"name": "Generic PP-CF @System",
-			"sub_path": "filament/Generic PP-CF @System.json"
-		},
 		{
 			"name": "Generic PP-GF @base",
 			"sub_path": "filament/Generic PP-GF @base.json"
 		},
-		{
-			"name": "Generic PP-GF @System",
-			"sub_path": "filament/Generic PP-GF @System.json"
-		},
 		{
 			"name": "Bambu PPA-CF @base",
 			"sub_path": "filament/Bambu/Bambu PPA-CF @base.json"
@@ -1292,10 +1028,6 @@
 			"name": "Elegoo ASA-CF @base",
 			"sub_path": "filament/Elegoo/Elegoo ASA-CF @base.json"
 		},
-		{
-			"name": "Elegoo ASA-CF @System",
-			"sub_path": "filament/Elegoo/Elegoo ASA-CF @System.json"
-		},
 		{
 			"name": "Overture ASA @System",
 			"sub_path": "filament/Overture/Overture ASA @System.json"
@@ -1388,14 +1120,14 @@
 			"name": "Elegoo PC-FR @base",
 			"sub_path": "filament/Elegoo/Elegoo PC-FR @base.json"
 		},
-		{
-			"name": "Elegoo PC-FR @System",
-			"sub_path": "filament/Elegoo/Elegoo PC-FR @System.json"
-		},
 		{
 			"name": "COEX PCTG PRIME @System",
 			"sub_path": "filament/COEX/COEX PCTG PRIME @System.json"
 		},
+		{
+			"name": "Generic PE-CF @System",
+			"sub_path": "filament/Generic PE-CF @System.json"
+		},
 		{
 			"name": "AliZ PETG @System",
 			"sub_path": "filament/AliZ/AliZ PETG @System.json"
@@ -1448,10 +1180,6 @@
 			"name": "Elegoo PET-CF @base",
 			"sub_path": "filament/Elegoo/Elegoo PET-CF @base.json"
 		},
-		{
-			"name": "Elegoo PET-CF @System",
-			"sub_path": "filament/Elegoo/Elegoo PET-CF @System.json"
-		},
 		{
 			"name": "Elegoo PETG @System",
 			"sub_path": "filament/Elegoo/Elegoo PETG @System.json"
@@ -1460,50 +1188,26 @@
 			"name": "Elegoo PETG HF @base",
 			"sub_path": "filament/Elegoo/Elegoo PETG HF @base.json"
 		},
-		{
-			"name": "Elegoo PETG HF @System",
-			"sub_path": "filament/Elegoo/Elegoo PETG HF @System.json"
-		},
 		{
 			"name": "Elegoo PETG PRO @base",
 			"sub_path": "filament/Elegoo/Elegoo PETG PRO @base.json"
 		},
-		{
-			"name": "Elegoo PETG PRO @System",
-			"sub_path": "filament/Elegoo/Elegoo PETG PRO @System.json"
-		},
 		{
 			"name": "Elegoo PETG Translucent @base",
 			"sub_path": "filament/Elegoo/Elegoo PETG Translucent @base.json"
 		},
-		{
-			"name": "Elegoo PETG Translucent @System",
-			"sub_path": "filament/Elegoo/Elegoo PETG Translucent @System.json"
-		},
 		{
 			"name": "Elegoo PETG-CF @base",
 			"sub_path": "filament/Elegoo/Elegoo PETG-CF @base.json"
 		},
-		{
-			"name": "Elegoo PETG-CF @System",
-			"sub_path": "filament/Elegoo/Elegoo PETG-CF @System.json"
-		},
 		{
 			"name": "Elegoo PETG-GF @base",
 			"sub_path": "filament/Elegoo/Elegoo PETG-GF @base.json"
 		},
-		{
-			"name": "Elegoo PETG-GF @System",
-			"sub_path": "filament/Elegoo/Elegoo PETG-GF @System.json"
-		},
 		{
 			"name": "Elegoo Rapid PETG @base",
 			"sub_path": "filament/Elegoo/Elegoo Rapid PETG @base.json"
 		},
-		{
-			"name": "Elegoo Rapid PETG @System",
-			"sub_path": "filament/Elegoo/Elegoo Rapid PETG @System.json"
-		},
 		{
 			"name": "FDplast PETG @System",
 			"sub_path": "filament/FDplast/FDplast PETG @System.json"
@@ -1528,6 +1232,70 @@
 			"name": "Fiberon PETG-rCF @System",
 			"sub_path": "filament/Polymaker/Fiberon PETG-rCF @System.json"
 		},
+		{
+			"name": "FilAr PETG Amarillo Lima",
+			"sub_path": "filament/FilAr/FilAr PETG Amarillo Lima.json"
+		},
+		{
+			"name": "FilAr PETG Amarillo Radiante",
+			"sub_path": "filament/FilAr/FilAr PETG Amarillo Radiante.json"
+		},
+		{
+			"name": "FilAr PETG Azul Boreal",
+			"sub_path": "filament/FilAr/FilAr PETG Azul Boreal.json"
+		},
+		{
+			"name": "FilAr PETG Azul Francia",
+			"sub_path": "filament/FilAr/FilAr PETG Azul Francia.json"
+		},
+		{
+			"name": "FilAr PETG Azul Imperial",
+			"sub_path": "filament/FilAr/FilAr PETG Azul Imperial.json"
+		},
+		{
+			"name": "FilAr PETG Blanco Antartida",
+			"sub_path": "filament/FilAr/FilAr PETG Blanco Antartida.json"
+		},
+		{
+			"name": "FilAr PETG Cian",
+			"sub_path": "filament/FilAr/FilAr PETG Cian.json"
+		},
+		{
+			"name": "FilAr PETG Coral",
+			"sub_path": "filament/FilAr/FilAr PETG Coral.json"
+		},
+		{
+			"name": "FilAr PETG Cristal",
+			"sub_path": "filament/FilAr/FilAr PETG Cristal.json"
+		},
+		{
+			"name": "FilAr PETG Gris Ceniza",
+			"sub_path": "filament/FilAr/FilAr PETG Gris Ceniza.json"
+		},
+		{
+			"name": "FilAr PETG Gris Plata",
+			"sub_path": "filament/FilAr/FilAr PETG Gris Plata.json"
+		},
+		{
+			"name": "FilAr PETG Magenta",
+			"sub_path": "filament/FilAr/FilAr PETG Magenta.json"
+		},
+		{
+			"name": "FilAr PETG Negro Azabache",
+			"sub_path": "filament/FilAr/FilAr PETG Negro Azabache.json"
+		},
+		{
+			"name": "FilAr PETG Rojo Carmesi",
+			"sub_path": "filament/FilAr/FilAr PETG Rojo Carmesi.json"
+		},
+		{
+			"name": "Generic PETG HF @System",
+			"sub_path": "filament/Generic PETG HF @System.json"
+		},
+		{
+			"name": "Generic PETG-CF @System",
+			"sub_path": "filament/Generic PETG-CF @System.json"
+		},
 		{
 			"name": "GreenGate3D PETG @System",
 			"sub_path": "filament/GreenGate3D/GreenGate3D PETG @System.json"
@@ -1656,106 +1424,54 @@
 			"name": "Elegoo PLA Basic @base",
 			"sub_path": "filament/Elegoo/Elegoo PLA Basic @base.json"
 		},
-		{
-			"name": "Elegoo PLA Basic @System",
-			"sub_path": "filament/Elegoo/Elegoo PLA Basic @System.json"
-		},
 		{
 			"name": "Elegoo PLA Galaxy @base",
 			"sub_path": "filament/Elegoo/Elegoo PLA Galaxy @base.json"
 		},
-		{
-			"name": "Elegoo PLA Galaxy @System",
-			"sub_path": "filament/Elegoo/Elegoo PLA Galaxy @System.json"
-		},
 		{
 			"name": "Elegoo PLA Glow @base",
 			"sub_path": "filament/Elegoo/Elegoo PLA Glow @base.json"
 		},
-		{
-			"name": "Elegoo PLA Glow @System",
-			"sub_path": "filament/Elegoo/Elegoo PLA Glow @System.json"
-		},
 		{
 			"name": "Elegoo PLA Marble @base",
 			"sub_path": "filament/Elegoo/Elegoo PLA Marble @base.json"
 		},
-		{
-			"name": "Elegoo PLA Marble @System",
-			"sub_path": "filament/Elegoo/Elegoo PLA Marble @System.json"
-		},
 		{
 			"name": "Elegoo PLA Matte @base",
 			"sub_path": "filament/Elegoo/Elegoo PLA Matte @base.json"
 		},
-		{
-			"name": "Elegoo PLA Matte @System",
-			"sub_path": "filament/Elegoo/Elegoo PLA Matte @System.json"
-		},
 		{
 			"name": "Elegoo PLA PRO @base",
 			"sub_path": "filament/Elegoo/Elegoo PLA PRO @base.json"
 		},
-		{
-			"name": "Elegoo PLA PRO @System",
-			"sub_path": "filament/Elegoo/Elegoo PLA PRO @System.json"
-		},
 		{
 			"name": "Elegoo PLA Silk @base",
 			"sub_path": "filament/Elegoo/Elegoo PLA Silk @base.json"
 		},
-		{
-			"name": "Elegoo PLA Silk @System",
-			"sub_path": "filament/Elegoo/Elegoo PLA Silk @System.json"
-		},
 		{
 			"name": "Elegoo PLA Sparkle @base",
 			"sub_path": "filament/Elegoo/Elegoo PLA Sparkle @base.json"
 		},
-		{
-			"name": "Elegoo PLA Sparkle @System",
-			"sub_path": "filament/Elegoo/Elegoo PLA Sparkle @System.json"
-		},
 		{
 			"name": "Elegoo PLA Translucent2 @base",
 			"sub_path": "filament/Elegoo/Elegoo PLA Translucent2 @base.json"
 		},
-		{
-			"name": "Elegoo PLA Translucent2 @System",
-			"sub_path": "filament/Elegoo/Elegoo PLA Translucent2 @System.json"
-		},
 		{
 			"name": "Elegoo PLA Wood @base",
 			"sub_path": "filament/Elegoo/Elegoo PLA Wood @base.json"
 		},
-		{
-			"name": "Elegoo PLA Wood @System",
-			"sub_path": "filament/Elegoo/Elegoo PLA Wood @System.json"
-		},
 		{
 			"name": "Elegoo PLA+ @base",
 			"sub_path": "filament/Elegoo/Elegoo PLA+ @base.json"
 		},
-		{
-			"name": "Elegoo PLA+ @System",
-			"sub_path": "filament/Elegoo/Elegoo PLA+ @System.json"
-		},
 		{
 			"name": "Elegoo PLA-CF @base",
 			"sub_path": "filament/Elegoo/Elegoo PLA-CF @base.json"
 		},
-		{
-			"name": "Elegoo PLA-CF @System",
-			"sub_path": "filament/Elegoo/Elegoo PLA-CF @System.json"
-		},
 		{
 			"name": "Elegoo Rapid PLA+ @base",
 			"sub_path": "filament/Elegoo/Elegoo Rapid PLA+ @base.json"
 		},
-		{
-			"name": "Elegoo Rapid PLA+ @System",
-			"sub_path": "filament/Elegoo/Elegoo Rapid PLA+ @System.json"
-		},
 		{
 			"name": "FDplast PLA @System",
 			"sub_path": "filament/FDplast/FDplast PLA @System.json"
@@ -1768,6 +1484,194 @@
 			"name": "FILL3D PLA Turbo @System",
 			"sub_path": "filament/FILL3D/FILL3D PLA Turbo @System.json"
 		},
+		{
+			"name": "FilAr PLA Amarillo Lirio",
+			"sub_path": "filament/FilAr/FilAr PLA Amarillo Lirio.json"
+		},
+		{
+			"name": "FilAr PLA Azul Francia",
+			"sub_path": "filament/FilAr/FilAr PLA Azul Francia.json"
+		},
+		{
+			"name": "FilAr PLA Blanco Antartida",
+			"sub_path": "filament/FilAr/FilAr PLA Blanco Antartida.json"
+		},
+		{
+			"name": "FilAr PLA Blanco Calido",
+			"sub_path": "filament/FilAr/FilAr PLA Blanco Calido.json"
+		},
+		{
+			"name": "FilAr PLA Bronce",
+			"sub_path": "filament/FilAr/FilAr PLA Bronce.json"
+		},
+		{
+			"name": "FilAr PLA Cafe con Leche",
+			"sub_path": "filament/FilAr/FilAr PLA Cafe con Leche.json"
+		},
+		{
+			"name": "FilAr PLA Carpincho",
+			"sub_path": "filament/FilAr/FilAr PLA Carpincho.json"
+		},
+		{
+			"name": "FilAr PLA Celeste Cielo",
+			"sub_path": "filament/FilAr/FilAr PLA Celeste Cielo.json"
+		},
+		{
+			"name": "FilAr PLA Cobre",
+			"sub_path": "filament/FilAr/FilAr PLA Cobre.json"
+		},
+		{
+			"name": "FilAr PLA Dorado",
+			"sub_path": "filament/FilAr/FilAr PLA Dorado.json"
+		},
+		{
+			"name": "FilAr PLA Gris Ceniza",
+			"sub_path": "filament/FilAr/FilAr PLA Gris Ceniza.json"
+		},
+		{
+			"name": "FilAr PLA Gris Pizarra",
+			"sub_path": "filament/FilAr/FilAr PLA Gris Pizarra.json"
+		},
+		{
+			"name": "FilAr PLA Gris Plata",
+			"sub_path": "filament/FilAr/FilAr PLA Gris Plata.json"
+		},
+		{
+			"name": "FilAr PLA Manteca",
+			"sub_path": "filament/FilAr/FilAr PLA Manteca.json"
+		},
+		{
+			"name": "FilAr PLA Marron Oxido",
+			"sub_path": "filament/FilAr/FilAr PLA Marron Oxido.json"
+		},
+		{
+			"name": "FilAr PLA Naranja Tigre",
+			"sub_path": "filament/FilAr/FilAr PLA Naranja Tigre.json"
+		},
+		{
+			"name": "FilAr PLA Negro Azabache",
+			"sub_path": "filament/FilAr/FilAr PLA Negro Azabache.json"
+		},
+		{
+			"name": "FilAr PLA Oro",
+			"sub_path": "filament/FilAr/FilAr PLA Oro.json"
+		},
+		{
+			"name": "FilAr PLA Piel",
+			"sub_path": "filament/FilAr/FilAr PLA Piel.json"
+		},
+		{
+			"name": "FilAr PLA Rojo de Carreras",
+			"sub_path": "filament/FilAr/FilAr PLA Rojo de Carreras.json"
+		},
+		{
+			"name": "FilAr PLA Rosa Amaranto",
+			"sub_path": "filament/FilAr/FilAr PLA Rosa Amaranto.json"
+		},
+		{
+			"name": "FilAr PLA Rosa Flamenco",
+			"sub_path": "filament/FilAr/FilAr PLA Rosa Flamenco.json"
+		},
+		{
+			"name": "FilAr PLA Tabaco",
+			"sub_path": "filament/FilAr/FilAr PLA Tabaco.json"
+		},
+		{
+			"name": "FilAr PLA Titanio",
+			"sub_path": "filament/FilAr/FilAr PLA Titanio.json"
+		},
+		{
+			"name": "FilAr PLA Verde FilAr",
+			"sub_path": "filament/FilAr/FilAr PLA Verde FilAr.json"
+		},
+		{
+			"name": "FilAr PLA Verde Manzana",
+			"sub_path": "filament/FilAr/FilAr PLA Verde Manzana.json"
+		},
+		{
+			"name": "FilAr PLA Verde Oliva",
+			"sub_path": "filament/FilAr/FilAr PLA Verde Oliva.json"
+		},
+		{
+			"name": "FilAr PLA Verde Pixel",
+			"sub_path": "filament/FilAr/FilAr PLA Verde Pixel.json"
+		},
+		{
+			"name": "FilAr PLA Violeta Jacaranda",
+			"sub_path": "filament/FilAr/FilAr PLA Violeta Jacaranda.json"
+		},
+		{
+			"name": "FilAr PLA-mate Amarillo",
+			"sub_path": "filament/FilAr/FilAr PLA-mate Amarillo.json"
+		},
+		{
+			"name": "FilAr PLA-mate Azul",
+			"sub_path": "filament/FilAr/FilAr PLA-mate Azul.json"
+		},
+		{
+			"name": "FilAr PLA-mate Beige",
+			"sub_path": "filament/FilAr/FilAr PLA-mate Beige.json"
+		},
+		{
+			"name": "FilAr PLA-mate Blanco",
+			"sub_path": "filament/FilAr/FilAr PLA-mate Blanco.json"
+		},
+		{
+			"name": "FilAr PLA-mate Bordo",
+			"sub_path": "filament/FilAr/FilAr PLA-mate Bordo.json"
+		},
+		{
+			"name": "FilAr PLA-mate Celeste Cielo",
+			"sub_path": "filament/FilAr/FilAr PLA-mate Celeste Cielo.json"
+		},
+		{
+			"name": "FilAr PLA-mate Chocolate",
+			"sub_path": "filament/FilAr/FilAr PLA-mate Chocolate.json"
+		},
+		{
+			"name": "FilAr PLA-mate Gris",
+			"sub_path": "filament/FilAr/FilAr PLA-mate Gris.json"
+		},
+		{
+			"name": "FilAr PLA-mate Marron",
+			"sub_path": "filament/FilAr/FilAr PLA-mate Marron.json"
+		},
+		{
+			"name": "FilAr PLA-mate Naranja",
+			"sub_path": "filament/FilAr/FilAr PLA-mate Naranja.json"
+		},
+		{
+			"name": "FilAr PLA-mate Negro",
+			"sub_path": "filament/FilAr/FilAr PLA-mate Negro.json"
+		},
+		{
+			"name": "FilAr PLA-mate Piel",
+			"sub_path": "filament/FilAr/FilAr PLA-mate Piel.json"
+		},
+		{
+			"name": "FilAr PLA-mate Rojo",
+			"sub_path": "filament/FilAr/FilAr PLA-mate Rojo.json"
+		},
+		{
+			"name": "FilAr PLA-mate Rosa",
+			"sub_path": "filament/FilAr/FilAr PLA-mate Rosa.json"
+		},
+		{
+			"name": "FilAr PLA-mate Uva",
+			"sub_path": "filament/FilAr/FilAr PLA-mate Uva.json"
+		},
+		{
+			"name": "FilAr PLA-mate Verde",
+			"sub_path": "filament/FilAr/FilAr PLA-mate Verde.json"
+		},
+		{
+			"name": "FilAr PLA-mate Violeta",
+			"sub_path": "filament/FilAr/FilAr PLA-mate Violeta.json"
+		},
+		{
+			"name": "Generic PLA Matte @System",
+			"sub_path": "filament/Generic PLA Matte @System.json"
+		},
 		{
 			"name": "NIT PLA @System",
 			"sub_path": "filament/NIT/NIT PLA @System.json"
@@ -1876,10 +1780,6 @@
 			"name": "PolyLite Dual PLA @base",
 			"sub_path": "filament/Polymaker/PolyLite Dual PLA @base.json"
 		},
-		{
-			"name": "PolyLite Dual PLA @System",
-			"sub_path": "filament/Polymaker/PolyLite Dual PLA @System.json"
-		},
 		{
 			"name": "PolyLite PLA @System",
 			"sub_path": "filament/Polymaker/PolyLite PLA @System.json"
@@ -1976,6 +1876,14 @@
 			"name": "FILL3D PPCF @System",
 			"sub_path": "filament/FILL3D/FILL3D PPCF @System.json"
 		},
+		{
+			"name": "Generic PP-CF @System",
+			"sub_path": "filament/Generic PP-CF @System.json"
+		},
+		{
+			"name": "Generic PP-GF @System",
+			"sub_path": "filament/Generic PP-GF @System.json"
+		},
 		{
 			"name": "Bambu PPA-CF @System",
 			"sub_path": "filament/Bambu/Bambu PPA-CF @System.json"
@@ -2024,10 +1932,6 @@
 			"name": "Elegoo Rapid TPU 95A @base",
 			"sub_path": "filament/Elegoo/Elegoo Rapid TPU 95A @base.json"
 		},
-		{
-			"name": "Elegoo Rapid TPU 95A @System",
-			"sub_path": "filament/Elegoo/Elegoo Rapid TPU 95A @System.json"
-		},
 		{
 			"name": "Elegoo TPU 95A @System",
 			"sub_path": "filament/Elegoo/Elegoo TPU 95A @System.json"
@@ -2040,6 +1944,14 @@
 			"name": "Overture TPU @System",
 			"sub_path": "filament/Overture/Overture TPU @System.json"
 		},
+		{
+			"name": "Elegoo ASA-CF @System",
+			"sub_path": "filament/Elegoo/Elegoo ASA-CF @System.json"
+		},
+		{
+			"name": "Elegoo PC-FR @System",
+			"sub_path": "filament/Elegoo/Elegoo PC-FR @System.json"
+		},
 		{
 			"name": "AliZ PETG-CF @System",
 			"sub_path": "filament/AliZ/AliZ PETG-CF @System.json"
@@ -2048,9 +1960,97 @@
 			"name": "AliZ PETG-Metal @System",
 			"sub_path": "filament/AliZ/AliZ PETG-Metal @System.json"
 		},
+		{
+			"name": "Elegoo PET-CF @System",
+			"sub_path": "filament/Elegoo/Elegoo PET-CF @System.json"
+		},
+		{
+			"name": "Elegoo PETG HF @System",
+			"sub_path": "filament/Elegoo/Elegoo PETG HF @System.json"
+		},
+		{
+			"name": "Elegoo PETG PRO @System",
+			"sub_path": "filament/Elegoo/Elegoo PETG PRO @System.json"
+		},
+		{
+			"name": "Elegoo PETG Translucent @System",
+			"sub_path": "filament/Elegoo/Elegoo PETG Translucent @System.json"
+		},
+		{
+			"name": "Elegoo PETG-CF @System",
+			"sub_path": "filament/Elegoo/Elegoo PETG-CF @System.json"
+		},
+		{
+			"name": "Elegoo PETG-GF @System",
+			"sub_path": "filament/Elegoo/Elegoo PETG-GF @System.json"
+		},
+		{
+			"name": "Elegoo Rapid PETG @System",
+			"sub_path": "filament/Elegoo/Elegoo Rapid PETG @System.json"
+		},
+		{
+			"name": "Elegoo PLA Basic @System",
+			"sub_path": "filament/Elegoo/Elegoo PLA Basic @System.json"
+		},
+		{
+			"name": "Elegoo PLA Galaxy @System",
+			"sub_path": "filament/Elegoo/Elegoo PLA Galaxy @System.json"
+		},
+		{
+			"name": "Elegoo PLA Glow @System",
+			"sub_path": "filament/Elegoo/Elegoo PLA Glow @System.json"
+		},
+		{
+			"name": "Elegoo PLA Marble @System",
+			"sub_path": "filament/Elegoo/Elegoo PLA Marble @System.json"
+		},
+		{
+			"name": "Elegoo PLA Matte @System",
+			"sub_path": "filament/Elegoo/Elegoo PLA Matte @System.json"
+		},
+		{
+			"name": "Elegoo PLA PRO @System",
+			"sub_path": "filament/Elegoo/Elegoo PLA PRO @System.json"
+		},
+		{
+			"name": "Elegoo PLA Silk @System",
+			"sub_path": "filament/Elegoo/Elegoo PLA Silk @System.json"
+		},
+		{
+			"name": "Elegoo PLA Sparkle @System",
+			"sub_path": "filament/Elegoo/Elegoo PLA Sparkle @System.json"
+		},
+		{
+			"name": "Elegoo PLA Translucent2 @System",
+			"sub_path": "filament/Elegoo/Elegoo PLA Translucent2 @System.json"
+		},
+		{
+			"name": "Elegoo PLA Wood @System",
+			"sub_path": "filament/Elegoo/Elegoo PLA Wood @System.json"
+		},
+		{
+			"name": "Elegoo PLA+ @System",
+			"sub_path": "filament/Elegoo/Elegoo PLA+ @System.json"
+		},
+		{
+			"name": "Elegoo PLA-CF @System",
+			"sub_path": "filament/Elegoo/Elegoo PLA-CF @System.json"
+		},
+		{
+			"name": "Elegoo Rapid PLA+ @System",
+			"sub_path": "filament/Elegoo/Elegoo Rapid PLA+ @System.json"
+		},
+		{
+			"name": "PolyLite Dual PLA @System",
+			"sub_path": "filament/Polymaker/PolyLite Dual PLA @System.json"
+		},
 		{
 			"name": "COEX PLA+Silk @System",
 			"sub_path": "filament/COEX/COEX PLA+Silk @System.json"
+		},
+		{
+			"name": "Elegoo Rapid TPU 95A @System",
+			"sub_path": "filament/Elegoo/Elegoo Rapid TPU 95A @System.json"
 		}
 	],
 	"process_list": [],

resources/profiles/Phrozen.json

@@ -1,6 +1,6 @@
 {
 	"name": "Phrozen",
-	"version": "02.04.00.03",
+	"version": "02.04.00.04",
 	"force_update": "0",
 	"description": "Phrozen configurations",
 	"machine_model_list": [

resources/profiles/Phrozen/machine/_fdm_machine_common.json

@@ -1,139 +0,0 @@
-{
-	"type": "machine",
-	"name": "fdm_machine_common",
-	"from": "system",
-	"instantiation": "false",
-	"gcode_flavor": "marlin",
-	"machine_start_gcode": "",
-	"machine_end_gcode": "",
-	"extruder_colour": [
-		"#018001"
-	],
-	"extruder_offset": [
-		"0x0"
-	],
-	"machine_max_acceleration_e": [
-		"5000",
-		"5000"
-	],
-	"machine_max_acceleration_extruding": [
-		"2000",
-		"2000"
-	],
-	"machine_max_acceleration_retracting": [
-		"5000",
-		"5000"
-	],
-	"machine_max_acceleration_travel": [
-		"3000",
-		"3000"
-	],
-	"machine_max_acceleration_x": [
-		"2000",
-		"2000"
-	],
-	"machine_max_acceleration_y": [
-		"2000",
-		"2000"
-	],
-	"machine_max_acceleration_z": [
-		"300",
-		"200"
-	],
-	"machine_max_speed_e": [
-		"25",
-		"25"
-	],
-	"machine_max_speed_x": [
-		"300",
-		"200"
-	],
-	"machine_max_speed_y": [
-		"300",
-		"200"
-	],
-	"machine_max_speed_z": [
-		"12",
-		"12"
-	],
-	"machine_max_jerk_e": [
-		"2.5",
-		"2.5"
-	],
-	"machine_max_jerk_x": [
-		"9",
-		"9"
-	],
-	"machine_max_jerk_y": [
-		"9",
-		"9"
-	],
-	"machine_max_jerk_z": [
-		"0.2",
-		"0.4"
-	],
-	"machine_min_extruding_rate": [
-		"0",
-		"0"
-	],
-	"machine_min_travel_rate": [
-		"0",
-		"0"
-	],
-	"max_layer_height": [
-		"0.3"
-	],
-	"min_layer_height": [
-		"0.08"
-	],
-	"printable_height": "300",
-	"extruder_clearance_radius": "65",
-	"extruder_clearance_height_to_rod": "36",
-	"extruder_clearance_height_to_lid": "140",
-	"nozzle_diameter": [
-		"0.4"
-	],
-	"printer_settings_id": "",
-	"printer_technology": "FFF",
-	"printer_variant": "0.4",
-	"retraction_minimum_travel": [
-		"1"
-	],
-	"retract_before_wipe": [
-		"70%"
-	],
-	"retract_when_changing_layer": [
-		"1"
-	],
-	"retraction_length": [
-		"0.8"
-	],
-	"retract_length_toolchange": [
-		"2"
-	],
-	"z_hop": [
-		"0.4"
-	],
-	"retract_restart_extra": [
-		"0"
-	],
-	"retract_restart_extra_toolchange": [
-		"0"
-	],
-	"retraction_speed": [
-		"30"
-	],
-	"deretraction_speed": [
-		"30"
-	],
-	"silent_mode": "0",
-	"single_extruder_multi_material": "1",
-	"change_filament_gcode": "",
-	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
-	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
-	"machine_pause_gcode": "M400 U1\n",
-	"wipe": [
-		"1"
-	],
-	"z_hop_types": "Normal Lift"
-}

resources/profiles/Prusa.json

@@ -1448,34 +1448,10 @@
 			"name": "fdm_filament_tpu",
 			"sub_path": "filament/fdm_filament_tpu.json"
 		},
-		{
-			"name": "Generic ABS @Prusa base",
-			"sub_path": "filament/Generic ABS @Prusa base.json"
-		},
-		{
-			"name": "Generic ABS @Prusa",
-			"sub_path": "filament/Generic ABS @Prusa.json"
-		},
 		{
 			"name": "Generic ABS @Prusa CORE One",
 			"sub_path": "filament/Generic ABS @Prusa CORE One.json"
 		},
-		{
-			"name": "Generic ABS @Prusa MINIIS",
-			"sub_path": "filament/Generic ABS @Prusa MINIIS.json"
-		},
-		{
-			"name": "Generic ABS @Prusa MINIIS 0.25",
-			"sub_path": "filament/Generic ABS @Prusa MINIIS 0.25.json"
-		},
-		{
-			"name": "Generic ABS @Prusa MINIIS 0.6",
-			"sub_path": "filament/Generic ABS @Prusa MINIIS 0.6.json"
-		},
-		{
-			"name": "Generic ABS @Prusa MINIIS 0.8",
-			"sub_path": "filament/Generic ABS @Prusa MINIIS 0.8.json"
-		},
 		{
 			"name": "Generic ABS @Prusa MK3.5",
 			"sub_path": "filament/Generic ABS @Prusa MK3.5.json"
@@ -1492,37 +1468,13 @@
 			"name": "Generic ABS @Prusa MK3.5 0.8",
 			"sub_path": "filament/Generic ABS @Prusa MK3.5 0.8.json"
 		},
-		{
-			"name": "Generic ABS @Prusa MK4",
-			"sub_path": "filament/Generic ABS @Prusa MK4.json"
-		},
 		{
 			"name": "Generic ABS @Prusa MK4S",
 			"sub_path": "filament/Generic ABS @Prusa MK4S.json"
 		},
 		{
-			"name": "Generic ABS @Prusa XL",
-			"sub_path": "filament/Generic ABS @Prusa XL.json"
-		},
-		{
-			"name": "Generic ABS @Prusa XL 5T",
-			"sub_path": "filament/Generic ABS @Prusa XL 5T.json"
-		},
-		{
-			"name": "Generic ABS HF @Prusa base",
-			"sub_path": "filament/Generic ABS HF @Prusa base.json"
-		},
-		{
-			"name": "Generic ABS HF @Prusa MINIIS",
-			"sub_path": "filament/Generic ABS HF @Prusa MINIIS.json"
-		},
-		{
-			"name": "Generic ABS HF @Prusa MINIIS 0.6",
-			"sub_path": "filament/Generic ABS HF @Prusa MINIIS 0.6.json"
-		},
-		{
-			"name": "Generic ABS HF @Prusa MINIIS 0.8",
-			"sub_path": "filament/Generic ABS HF @Prusa MINIIS 0.8.json"
+			"name": "Generic ABS @Prusa base",
+			"sub_path": "filament/Generic ABS @Prusa base.json"
 		},
 		{
 			"name": "Generic ABS HF @Prusa MK3.5",
@@ -1536,6 +1488,10 @@
 			"name": "Generic ABS HF @Prusa MK3.5 0.8",
 			"sub_path": "filament/Generic ABS HF @Prusa MK3.5 0.8.json"
 		},
+		{
+			"name": "Generic ABS HF @Prusa base",
+			"sub_path": "filament/Generic ABS HF @Prusa base.json"
+		},
 		{
 			"name": "Generic ASA @Prusa",
 			"sub_path": "filament/Generic ASA @Prusa.json"
@@ -1584,22 +1540,6 @@
 			"name": "Generic ASA @Prusa MK4S",
 			"sub_path": "filament/Generic ASA @Prusa MK4S.json"
 		},
-		{
-			"name": "Generic ASA HF @Prusa base",
-			"sub_path": "filament/Generic ASA HF @Prusa base.json"
-		},
-		{
-			"name": "Generic ASA HF @Prusa MINIIS",
-			"sub_path": "filament/Generic ASA HF @Prusa MINIIS.json"
-		},
-		{
-			"name": "Generic ASA HF @Prusa MINIIS 0.6",
-			"sub_path": "filament/Generic ASA HF @Prusa MINIIS 0.6.json"
-		},
-		{
-			"name": "Generic ASA HF @Prusa MINIIS 0.8",
-			"sub_path": "filament/Generic ASA HF @Prusa MINIIS 0.8.json"
-		},
 		{
 			"name": "Generic ASA HF @Prusa MK3.5",
 			"sub_path": "filament/Generic ASA HF @Prusa MK3.5.json"
@@ -1612,6 +1552,10 @@
 			"name": "Generic ASA HF @Prusa MK3.5 0.8",
 			"sub_path": "filament/Generic ASA HF @Prusa MK3.5 0.8.json"
 		},
+		{
+			"name": "Generic ASA HF @Prusa base",
+			"sub_path": "filament/Generic ASA HF @Prusa base.json"
+		},
 		{
 			"name": "Prusament ASA @CORE One",
 			"sub_path": "filament/Prusament ASA @CORE One.json"
@@ -1636,30 +1580,6 @@
 			"name": "Generic TPU @Prusa CORE One",
 			"sub_path": "filament/Generic TPU @Prusa CORE One.json"
 		},
-		{
-			"name": "Generic PA @Prusa base",
-			"sub_path": "filament/Generic PA @Prusa base.json"
-		},
-		{
-			"name": "Generic PA @Prusa",
-			"sub_path": "filament/Generic PA @Prusa.json"
-		},
-		{
-			"name": "Generic PA @Prusa MINIIS",
-			"sub_path": "filament/Generic PA @Prusa MINIIS.json"
-		},
-		{
-			"name": "Generic PA @Prusa MINIIS 0.25",
-			"sub_path": "filament/Generic PA @Prusa MINIIS 0.25.json"
-		},
-		{
-			"name": "Generic PA @Prusa MINIIS 0.6",
-			"sub_path": "filament/Generic PA @Prusa MINIIS 0.6.json"
-		},
-		{
-			"name": "Generic PA @Prusa MINIIS 0.8",
-			"sub_path": "filament/Generic PA @Prusa MINIIS 0.8.json"
-		},
 		{
 			"name": "Generic PA @Prusa MK3.5",
 			"sub_path": "filament/Generic PA @Prusa MK3.5.json"
@@ -1677,28 +1597,8 @@
 			"sub_path": "filament/Generic PA @Prusa MK3.5 0.8.json"
 		},
 		{
-			"name": "Generic PA-CF @Prusa base",
-			"sub_path": "filament/Generic PA-CF @Prusa base.json"
-		},
-		{
-			"name": "Generic PA-CF @Prusa",
-			"sub_path": "filament/Generic PA-CF @Prusa.json"
-		},
-		{
-			"name": "Generic PA-CF @Prusa MINIIS",
-			"sub_path": "filament/Generic PA-CF @Prusa MINIIS.json"
-		},
-		{
-			"name": "Generic PA-CF @Prusa MINIIS 0.25",
-			"sub_path": "filament/Generic PA-CF @Prusa MINIIS 0.25.json"
-		},
-		{
-			"name": "Generic PA-CF @Prusa MINIIS 0.6",
-			"sub_path": "filament/Generic PA-CF @Prusa MINIIS 0.6.json"
-		},
-		{
-			"name": "Generic PA-CF @Prusa MINIIS 0.8",
-			"sub_path": "filament/Generic PA-CF @Prusa MINIIS 0.8.json"
+			"name": "Generic PA @Prusa base",
+			"sub_path": "filament/Generic PA @Prusa base.json"
 		},
 		{
 			"name": "Generic PA-CF @Prusa MK3.5",
@@ -1716,6 +1616,10 @@
 			"name": "Generic PA-CF @Prusa MK3.5 0.8",
 			"sub_path": "filament/Generic PA-CF @Prusa MK3.5 0.8.json"
 		},
+		{
+			"name": "Generic PA-CF @Prusa base",
+			"sub_path": "filament/Generic PA-CF @Prusa base.json"
+		},
 		{
 			"name": "Prusament PA-CF @CORE One",
 			"sub_path": "filament/Prusament PA-CF @CORE One.json"
@@ -1764,22 +1668,6 @@
 			"name": "Generic PC @Prusa MK3.5 0.8",
 			"sub_path": "filament/Generic PC @Prusa MK3.5 0.8.json"
 		},
-		{
-			"name": "Generic PC HF @Prusa base",
-			"sub_path": "filament/Generic PC HF @Prusa base.json"
-		},
-		{
-			"name": "Generic PC HF @Prusa MINIIS",
-			"sub_path": "filament/Generic PC HF @Prusa MINIIS.json"
-		},
-		{
-			"name": "Generic PC HF @Prusa MINIIS 0.6",
-			"sub_path": "filament/Generic PC HF @Prusa MINIIS 0.6.json"
-		},
-		{
-			"name": "Generic PC HF @Prusa MINIIS 0.8",
-			"sub_path": "filament/Generic PC HF @Prusa MINIIS 0.8.json"
-		},
 		{
 			"name": "Generic PC HF @Prusa MK3.5",
 			"sub_path": "filament/Generic PC HF @Prusa MK3.5.json"
@@ -1792,6 +1680,10 @@
 			"name": "Generic PC HF @Prusa MK3.5 0.8",
 			"sub_path": "filament/Generic PC HF @Prusa MK3.5 0.8.json"
 		},
+		{
+			"name": "Generic PC HF @Prusa base",
+			"sub_path": "filament/Generic PC HF @Prusa base.json"
+		},
 		{
 			"name": "Prusament PC Blend @CORE One",
 			"sub_path": "filament/Prusament PC Blend @CORE One.json"
@@ -1816,34 +1708,10 @@
 			"name": "Prusament PC-CF @XL 5T",
 			"sub_path": "filament/Prusament PC-CF @XL 5T.json"
 		},
-		{
-			"name": "Generic PETG @Prusa base",
-			"sub_path": "filament/Generic PETG @Prusa base.json"
-		},
-		{
-			"name": "Generic PETG @Prusa",
-			"sub_path": "filament/Generic PETG @Prusa.json"
-		},
 		{
 			"name": "Generic PETG @Prusa CORE One",
 			"sub_path": "filament/Generic PETG @Prusa CORE One.json"
 		},
-		{
-			"name": "Generic PETG @Prusa MINIIS",
-			"sub_path": "filament/Generic PETG @Prusa MINIIS.json"
-		},
-		{
-			"name": "Generic PETG @Prusa MINIIS 0.25",
-			"sub_path": "filament/Generic PETG @Prusa MINIIS 0.25.json"
-		},
-		{
-			"name": "Generic PETG @Prusa MINIIS 0.6",
-			"sub_path": "filament/Generic PETG @Prusa MINIIS 0.6.json"
-		},
-		{
-			"name": "Generic PETG @Prusa MINIIS 0.8",
-			"sub_path": "filament/Generic PETG @Prusa MINIIS 0.8.json"
-		},
 		{
 			"name": "Generic PETG @Prusa MK3.5",
 			"sub_path": "filament/Generic PETG @Prusa MK3.5.json"
@@ -1860,37 +1728,13 @@
 			"name": "Generic PETG @Prusa MK3.5 0.8",
 			"sub_path": "filament/Generic PETG @Prusa MK3.5 0.8.json"
 		},
-		{
-			"name": "Generic PETG @Prusa MK4",
-			"sub_path": "filament/Generic PETG @Prusa MK4.json"
-		},
 		{
 			"name": "Generic PETG @Prusa MK4S",
 			"sub_path": "filament/Generic PETG @Prusa MK4S.json"
 		},
 		{
-			"name": "Generic PETG @Prusa XL",
-			"sub_path": "filament/Generic PETG @Prusa XL.json"
-		},
-		{
-			"name": "Generic PETG @Prusa XL 5T",
-			"sub_path": "filament/Generic PETG @Prusa XL 5T.json"
-		},
-		{
-			"name": "Generic PETG HF @Prusa base",
-			"sub_path": "filament/Generic PETG HF @Prusa base.json"
-		},
-		{
-			"name": "Generic PETG HF @Prusa MINIIS",
-			"sub_path": "filament/Generic PETG HF @Prusa MINIIS.json"
-		},
-		{
-			"name": "Generic PETG HF @Prusa MINIIS 0.6",
-			"sub_path": "filament/Generic PETG HF @Prusa MINIIS 0.6.json"
-		},
-		{
-			"name": "Generic PETG HF @Prusa MINIIS 0.8",
-			"sub_path": "filament/Generic PETG HF @Prusa MINIIS 0.8.json"
+			"name": "Generic PETG @Prusa base",
+			"sub_path": "filament/Generic PETG @Prusa base.json"
 		},
 		{
 			"name": "Generic PETG HF @Prusa MK3.5",
@@ -1904,6 +1748,10 @@
 			"name": "Generic PETG HF @Prusa MK3.5 0.8",
 			"sub_path": "filament/Generic PETG HF @Prusa MK3.5 0.8.json"
 		},
+		{
+			"name": "Generic PETG HF @Prusa base",
+			"sub_path": "filament/Generic PETG HF @Prusa base.json"
+		},
 		{
 			"name": "Prusament PETG @CORE One",
 			"sub_path": "filament/Prusament PETG @CORE One.json"
@@ -1912,42 +1760,10 @@
 			"name": "Prusament PETG @base",
 			"sub_path": "filament/Prusament PETG @base.json"
 		},
-		{
-			"name": "Prusament PETG @XL",
-			"sub_path": "filament/Prusament PETG @XL.json"
-		},
-		{
-			"name": "Prusament PETG @XL 5T",
-			"sub_path": "filament/Prusament PETG @XL 5T.json"
-		},
-		{
-			"name": "Generic PLA @Prusa base",
-			"sub_path": "filament/Generic PLA @Prusa base.json"
-		},
-		{
-			"name": "Generic PLA @Prusa",
-			"sub_path": "filament/Generic PLA @Prusa.json"
-		},
 		{
 			"name": "Generic PLA @Prusa CORE One",
 			"sub_path": "filament/Generic PLA @Prusa CORE One.json"
 		},
-		{
-			"name": "Generic PLA @Prusa MINIIS",
-			"sub_path": "filament/Generic PLA @Prusa MINIIS.json"
-		},
-		{
-			"name": "Generic PLA @Prusa MINIIS 0.25",
-			"sub_path": "filament/Generic PLA @Prusa MINIIS 0.25.json"
-		},
-		{
-			"name": "Generic PLA @Prusa MINIIS 0.6",
-			"sub_path": "filament/Generic PLA @Prusa MINIIS 0.6.json"
-		},
-		{
-			"name": "Generic PLA @Prusa MINIIS 0.8",
-			"sub_path": "filament/Generic PLA @Prusa MINIIS 0.8.json"
-		},
 		{
 			"name": "Generic PLA @Prusa MK3.5",
 			"sub_path": "filament/Generic PLA @Prusa MK3.5.json"
@@ -1964,37 +1780,13 @@
 			"name": "Generic PLA @Prusa MK3.5 0.8",
 			"sub_path": "filament/Generic PLA @Prusa MK3.5 0.8.json"
 		},
-		{
-			"name": "Generic PLA @Prusa MK4",
-			"sub_path": "filament/Generic PLA @Prusa MK4.json"
-		},
 		{
 			"name": "Generic PLA @Prusa MK4S",
 			"sub_path": "filament/Generic PLA @Prusa MK4S.json"
 		},
 		{
-			"name": "Generic PLA @Prusa XL",
-			"sub_path": "filament/Generic PLA @Prusa XL.json"
-		},
-		{
-			"name": "Generic PLA @Prusa XL 5T",
-			"sub_path": "filament/Generic PLA @Prusa XL 5T.json"
-		},
-		{
-			"name": "Generic PLA HF @Prusa base",
-			"sub_path": "filament/Generic PLA HF @Prusa base.json"
-		},
-		{
-			"name": "Generic PLA HF @Prusa MINIIS",
-			"sub_path": "filament/Generic PLA HF @Prusa MINIIS.json"
-		},
-		{
-			"name": "Generic PLA HF @Prusa MINIIS 0.6",
-			"sub_path": "filament/Generic PLA HF @Prusa MINIIS 0.6.json"
-		},
-		{
-			"name": "Generic PLA HF @Prusa MINIIS 0.8",
-			"sub_path": "filament/Generic PLA HF @Prusa MINIIS 0.8.json"
+			"name": "Generic PLA @Prusa base",
+			"sub_path": "filament/Generic PLA @Prusa base.json"
 		},
 		{
 			"name": "Generic PLA HF @Prusa MK3.5",
@@ -2008,34 +1800,14 @@
 			"name": "Generic PLA HF @Prusa MK3.5 0.8",
 			"sub_path": "filament/Generic PLA HF @Prusa MK3.5 0.8.json"
 		},
+		{
+			"name": "Generic PLA HF @Prusa base",
+			"sub_path": "filament/Generic PLA HF @Prusa base.json"
+		},
 		{
 			"name": "Generic PLA Silk @Prusa CORE One",
 			"sub_path": "filament/Generic PLA Silk @Prusa CORE One.json"
 		},
-		{
-			"name": "Generic PLA-CF @Prusa base",
-			"sub_path": "filament/Generic PLA-CF @Prusa base.json"
-		},
-		{
-			"name": "Generic PLA-CF @Prusa",
-			"sub_path": "filament/Generic PLA-CF @Prusa.json"
-		},
-		{
-			"name": "Generic PLA-CF @Prusa MINIIS",
-			"sub_path": "filament/Generic PLA-CF @Prusa MINIIS.json"
-		},
-		{
-			"name": "Generic PLA-CF @Prusa MINIIS 0.25",
-			"sub_path": "filament/Generic PLA-CF @Prusa MINIIS 0.25.json"
-		},
-		{
-			"name": "Generic PLA-CF @Prusa MINIIS 0.6",
-			"sub_path": "filament/Generic PLA-CF @Prusa MINIIS 0.6.json"
-		},
-		{
-			"name": "Generic PLA-CF @Prusa MINIIS 0.8",
-			"sub_path": "filament/Generic PLA-CF @Prusa MINIIS 0.8.json"
-		},
 		{
 			"name": "Generic PLA-CF @Prusa MK3.5",
 			"sub_path": "filament/Generic PLA-CF @Prusa MK3.5.json"
@@ -2052,6 +1824,10 @@
 			"name": "Generic PLA-CF @Prusa MK3.5 0.8",
 			"sub_path": "filament/Generic PLA-CF @Prusa MK3.5 0.8.json"
 		},
+		{
+			"name": "Generic PLA-CF @Prusa base",
+			"sub_path": "filament/Generic PLA-CF @Prusa base.json"
+		},
 		{
 			"name": "Prusament PLA @CORE One",
 			"sub_path": "filament/Prusament PLA @CORE One.json"
@@ -2060,14 +1836,6 @@
 			"name": "Prusament PLA @base",
 			"sub_path": "filament/Prusament PLA @base.json"
 		},
-		{
-			"name": "Prusament PLA @XL",
-			"sub_path": "filament/Prusament PLA @XL.json"
-		},
-		{
-			"name": "Prusament PLA @XL 5T",
-			"sub_path": "filament/Prusament PLA @XL 5T.json"
-		},
 		{
 			"name": "Prusament rPLA @CORE One",
 			"sub_path": "filament/Prusament rPLA @CORE One.json"
@@ -2076,38 +1844,6 @@
 			"name": "Prusament rPLA @base",
 			"sub_path": "filament/Prusament rPLA @base.json"
 		},
-		{
-			"name": "Prusament rPLA @XL",
-			"sub_path": "filament/Prusament rPLA @XL.json"
-		},
-		{
-			"name": "Prusament rPLA @XL 5T",
-			"sub_path": "filament/Prusament rPLA @XL 5T.json"
-		},
-		{
-			"name": "Generic PVA @Prusa base",
-			"sub_path": "filament/Generic PVA @Prusa base.json"
-		},
-		{
-			"name": "Generic PVA @Prusa",
-			"sub_path": "filament/Generic PVA @Prusa.json"
-		},
-		{
-			"name": "Generic PVA @Prusa MINIIS",
-			"sub_path": "filament/Generic PVA @Prusa MINIIS.json"
-		},
-		{
-			"name": "Generic PVA @Prusa MINIIS 0.25",
-			"sub_path": "filament/Generic PVA @Prusa MINIIS 0.25.json"
-		},
-		{
-			"name": "Generic PVA @Prusa MINIIS 0.6",
-			"sub_path": "filament/Generic PVA @Prusa MINIIS 0.6.json"
-		},
-		{
-			"name": "Generic PVA @Prusa MINIIS 0.8",
-			"sub_path": "filament/Generic PVA @Prusa MINIIS 0.8.json"
-		},
 		{
 			"name": "Generic PVA @Prusa MK3.5",
 			"sub_path": "filament/Generic PVA @Prusa MK3.5.json"
@@ -2125,20 +1861,8 @@
 			"sub_path": "filament/Generic PVA @Prusa MK3.5 0.8.json"
 		},
 		{
-			"name": "Generic PVA HF @Prusa base",
-			"sub_path": "filament/Generic PVA HF @Prusa base.json"
-		},
-		{
-			"name": "Generic PVA HF @Prusa MINIIS",
-			"sub_path": "filament/Generic PVA HF @Prusa MINIIS.json"
-		},
-		{
-			"name": "Generic PVA HF @Prusa MINIIS 0.6",
-			"sub_path": "filament/Generic PVA HF @Prusa MINIIS 0.6.json"
-		},
-		{
-			"name": "Generic PVA HF @Prusa MINIIS 0.8",
-			"sub_path": "filament/Generic PVA HF @Prusa MINIIS 0.8.json"
+			"name": "Generic PVA @Prusa base",
+			"sub_path": "filament/Generic PVA @Prusa base.json"
 		},
 		{
 			"name": "Generic PVA HF @Prusa MK3.5",
@@ -2152,6 +1876,10 @@
 			"name": "Generic PVA HF @Prusa MK3.5 0.8",
 			"sub_path": "filament/Generic PVA HF @Prusa MK3.5 0.8.json"
 		},
+		{
+			"name": "Generic PVA HF @Prusa base",
+			"sub_path": "filament/Generic PVA HF @Prusa base.json"
+		},
 		{
 			"name": "Prusament PVB @CORE One",
 			"sub_path": "filament/Prusament PVB @CORE One.json"
@@ -2164,42 +1892,26 @@
 			"name": "Prusament PVB @XL 5T",
 			"sub_path": "filament/Prusament PVB @XL 5T.json"
 		},
-		{
-			"name": "Generic TPU @Prusa base",
-			"sub_path": "filament/Generic TPU @Prusa base.json"
-		},
-		{
-			"name": "Generic TPU @Prusa",
-			"sub_path": "filament/Generic TPU @Prusa.json"
-		},
-		{
-			"name": "Generic TPU @Prusa MINIIS",
-			"sub_path": "filament/Generic TPU @Prusa MINIIS.json"
-		},
 		{
 			"name": "Generic TPU @Prusa MK3.5",
 			"sub_path": "filament/Generic TPU @Prusa MK3.5.json"
 		},
-		{
-			"name": "Generic TPU @Prusa MK4",
-			"sub_path": "filament/Generic TPU @Prusa MK4.json"
-		},
 		{
 			"name": "Generic TPU @Prusa MK4S",
 			"sub_path": "filament/Generic TPU @Prusa MK4S.json"
 		},
 		{
-			"name": "Generic TPU HF @Prusa base",
-			"sub_path": "filament/Generic TPU HF @Prusa base.json"
-		},
-		{
-			"name": "Generic TPU HF @Prusa MINIIS",
-			"sub_path": "filament/Generic TPU HF @Prusa MINIIS.json"
+			"name": "Generic TPU @Prusa base",
+			"sub_path": "filament/Generic TPU @Prusa base.json"
 		},
 		{
 			"name": "Generic TPU HF @Prusa MK3.5",
 			"sub_path": "filament/Generic TPU HF @Prusa MK3.5.json"
 		},
+		{
+			"name": "Generic TPU HF @Prusa base",
+			"sub_path": "filament/Generic TPU HF @Prusa base.json"
+		},
 		{
 			"name": "Generic ABS @Prusa CORE One 0.6",
 			"sub_path": "filament/Generic ABS @Prusa CORE One 0.6.json"
@@ -2236,6 +1948,50 @@
 			"name": "Generic ABS @Prusa MK4S HF0.4",
 			"sub_path": "filament/Generic ABS @Prusa MK4S HF0.4.json"
 		},
+		{
+			"name": "Generic ABS @Prusa",
+			"sub_path": "filament/Generic ABS @Prusa.json"
+		},
+		{
+			"name": "Generic ABS @Prusa MINIIS",
+			"sub_path": "filament/Generic ABS @Prusa MINIIS.json"
+		},
+		{
+			"name": "Generic ABS @Prusa MINIIS 0.25",
+			"sub_path": "filament/Generic ABS @Prusa MINIIS 0.25.json"
+		},
+		{
+			"name": "Generic ABS @Prusa MINIIS 0.6",
+			"sub_path": "filament/Generic ABS @Prusa MINIIS 0.6.json"
+		},
+		{
+			"name": "Generic ABS @Prusa MINIIS 0.8",
+			"sub_path": "filament/Generic ABS @Prusa MINIIS 0.8.json"
+		},
+		{
+			"name": "Generic ABS @Prusa MK4",
+			"sub_path": "filament/Generic ABS @Prusa MK4.json"
+		},
+		{
+			"name": "Generic ABS @Prusa XL",
+			"sub_path": "filament/Generic ABS @Prusa XL.json"
+		},
+		{
+			"name": "Generic ABS @Prusa XL 5T",
+			"sub_path": "filament/Generic ABS @Prusa XL 5T.json"
+		},
+		{
+			"name": "Generic ABS HF @Prusa MINIIS",
+			"sub_path": "filament/Generic ABS HF @Prusa MINIIS.json"
+		},
+		{
+			"name": "Generic ABS HF @Prusa MINIIS 0.6",
+			"sub_path": "filament/Generic ABS HF @Prusa MINIIS 0.6.json"
+		},
+		{
+			"name": "Generic ABS HF @Prusa MINIIS 0.8",
+			"sub_path": "filament/Generic ABS HF @Prusa MINIIS 0.8.json"
+		},
 		{
 			"name": "Generic ASA @Prusa CORE One 0.6",
 			"sub_path": "filament/Generic ASA @Prusa CORE One 0.6.json"
@@ -2272,6 +2028,18 @@
 			"name": "Generic ASA @Prusa MK4S HF0.4",
 			"sub_path": "filament/Generic ASA @Prusa MK4S HF0.4.json"
 		},
+		{
+			"name": "Generic ASA HF @Prusa MINIIS",
+			"sub_path": "filament/Generic ASA HF @Prusa MINIIS.json"
+		},
+		{
+			"name": "Generic ASA HF @Prusa MINIIS 0.6",
+			"sub_path": "filament/Generic ASA HF @Prusa MINIIS 0.6.json"
+		},
+		{
+			"name": "Generic ASA HF @Prusa MINIIS 0.8",
+			"sub_path": "filament/Generic ASA HF @Prusa MINIIS 0.8.json"
+		},
 		{
 			"name": "Prusament ASA @CORE One 0.6",
 			"sub_path": "filament/Prusament ASA @CORE One 0.6.json"
@@ -2304,6 +2072,46 @@
 			"name": "Generic TPU @Prusa CORE One 0.8",
 			"sub_path": "filament/Generic TPU @Prusa CORE One 0.8.json"
 		},
+		{
+			"name": "Generic PA @Prusa",
+			"sub_path": "filament/Generic PA @Prusa.json"
+		},
+		{
+			"name": "Generic PA @Prusa MINIIS",
+			"sub_path": "filament/Generic PA @Prusa MINIIS.json"
+		},
+		{
+			"name": "Generic PA @Prusa MINIIS 0.25",
+			"sub_path": "filament/Generic PA @Prusa MINIIS 0.25.json"
+		},
+		{
+			"name": "Generic PA @Prusa MINIIS 0.6",
+			"sub_path": "filament/Generic PA @Prusa MINIIS 0.6.json"
+		},
+		{
+			"name": "Generic PA @Prusa MINIIS 0.8",
+			"sub_path": "filament/Generic PA @Prusa MINIIS 0.8.json"
+		},
+		{
+			"name": "Generic PA-CF @Prusa",
+			"sub_path": "filament/Generic PA-CF @Prusa.json"
+		},
+		{
+			"name": "Generic PA-CF @Prusa MINIIS",
+			"sub_path": "filament/Generic PA-CF @Prusa MINIIS.json"
+		},
+		{
+			"name": "Generic PA-CF @Prusa MINIIS 0.25",
+			"sub_path": "filament/Generic PA-CF @Prusa MINIIS 0.25.json"
+		},
+		{
+			"name": "Generic PA-CF @Prusa MINIIS 0.6",
+			"sub_path": "filament/Generic PA-CF @Prusa MINIIS 0.6.json"
+		},
+		{
+			"name": "Generic PA-CF @Prusa MINIIS 0.8",
+			"sub_path": "filament/Generic PA-CF @Prusa MINIIS 0.8.json"
+		},
 		{
 			"name": "Prusament PA-CF @CORE One 0.6",
 			"sub_path": "filament/Prusament PA-CF @CORE One 0.6.json"
@@ -2312,6 +2120,18 @@
 			"name": "Prusament PA-CF @CORE One 0.8",
 			"sub_path": "filament/Prusament PA-CF @CORE One 0.8.json"
 		},
+		{
+			"name": "Generic PC HF @Prusa MINIIS",
+			"sub_path": "filament/Generic PC HF @Prusa MINIIS.json"
+		},
+		{
+			"name": "Generic PC HF @Prusa MINIIS 0.6",
+			"sub_path": "filament/Generic PC HF @Prusa MINIIS 0.6.json"
+		},
+		{
+			"name": "Generic PC HF @Prusa MINIIS 0.8",
+			"sub_path": "filament/Generic PC HF @Prusa MINIIS 0.8.json"
+		},
 		{
 			"name": "Prusament PC Blend @CORE One 0.6",
 			"sub_path": "filament/Prusament PC Blend @CORE One 0.6.json"
@@ -2380,6 +2200,50 @@
 			"name": "Generic PETG @Prusa MK4S HF0.4",
 			"sub_path": "filament/Generic PETG @Prusa MK4S HF0.4.json"
 		},
+		{
+			"name": "Generic PETG @Prusa",
+			"sub_path": "filament/Generic PETG @Prusa.json"
+		},
+		{
+			"name": "Generic PETG @Prusa MINIIS",
+			"sub_path": "filament/Generic PETG @Prusa MINIIS.json"
+		},
+		{
+			"name": "Generic PETG @Prusa MINIIS 0.25",
+			"sub_path": "filament/Generic PETG @Prusa MINIIS 0.25.json"
+		},
+		{
+			"name": "Generic PETG @Prusa MINIIS 0.6",
+			"sub_path": "filament/Generic PETG @Prusa MINIIS 0.6.json"
+		},
+		{
+			"name": "Generic PETG @Prusa MINIIS 0.8",
+			"sub_path": "filament/Generic PETG @Prusa MINIIS 0.8.json"
+		},
+		{
+			"name": "Generic PETG @Prusa MK4",
+			"sub_path": "filament/Generic PETG @Prusa MK4.json"
+		},
+		{
+			"name": "Generic PETG @Prusa XL",
+			"sub_path": "filament/Generic PETG @Prusa XL.json"
+		},
+		{
+			"name": "Generic PETG @Prusa XL 5T",
+			"sub_path": "filament/Generic PETG @Prusa XL 5T.json"
+		},
+		{
+			"name": "Generic PETG HF @Prusa MINIIS",
+			"sub_path": "filament/Generic PETG HF @Prusa MINIIS.json"
+		},
+		{
+			"name": "Generic PETG HF @Prusa MINIIS 0.6",
+			"sub_path": "filament/Generic PETG HF @Prusa MINIIS 0.6.json"
+		},
+		{
+			"name": "Generic PETG HF @Prusa MINIIS 0.8",
+			"sub_path": "filament/Generic PETG HF @Prusa MINIIS 0.8.json"
+		},
 		{
 			"name": "Prusament PETG @CORE One 0.6",
 			"sub_path": "filament/Prusament PETG @CORE One 0.6.json"
@@ -2404,6 +2268,14 @@
 			"name": "Prusament PETG @CORE One HF 0.8",
 			"sub_path": "filament/Prusament PETG @CORE One HF 0.8.json"
 		},
+		{
+			"name": "Prusament PETG @XL",
+			"sub_path": "filament/Prusament PETG @XL.json"
+		},
+		{
+			"name": "Prusament PETG @XL 5T",
+			"sub_path": "filament/Prusament PETG @XL 5T.json"
+		},
 		{
 			"name": "Generic PLA @Prusa CORE One 0.6",
 			"sub_path": "filament/Generic PLA @Prusa CORE One 0.6.json"
@@ -2444,6 +2316,50 @@
 			"name": "Generic PLA Silk @Prusa MK4S",
 			"sub_path": "filament/Generic PLA Silk @Prusa MK4S.json"
 		},
+		{
+			"name": "Generic PLA @Prusa",
+			"sub_path": "filament/Generic PLA @Prusa.json"
+		},
+		{
+			"name": "Generic PLA @Prusa MINIIS",
+			"sub_path": "filament/Generic PLA @Prusa MINIIS.json"
+		},
+		{
+			"name": "Generic PLA @Prusa MINIIS 0.25",
+			"sub_path": "filament/Generic PLA @Prusa MINIIS 0.25.json"
+		},
+		{
+			"name": "Generic PLA @Prusa MINIIS 0.6",
+			"sub_path": "filament/Generic PLA @Prusa MINIIS 0.6.json"
+		},
+		{
+			"name": "Generic PLA @Prusa MINIIS 0.8",
+			"sub_path": "filament/Generic PLA @Prusa MINIIS 0.8.json"
+		},
+		{
+			"name": "Generic PLA @Prusa MK4",
+			"sub_path": "filament/Generic PLA @Prusa MK4.json"
+		},
+		{
+			"name": "Generic PLA @Prusa XL",
+			"sub_path": "filament/Generic PLA @Prusa XL.json"
+		},
+		{
+			"name": "Generic PLA @Prusa XL 5T",
+			"sub_path": "filament/Generic PLA @Prusa XL 5T.json"
+		},
+		{
+			"name": "Generic PLA HF @Prusa MINIIS",
+			"sub_path": "filament/Generic PLA HF @Prusa MINIIS.json"
+		},
+		{
+			"name": "Generic PLA HF @Prusa MINIIS 0.6",
+			"sub_path": "filament/Generic PLA HF @Prusa MINIIS 0.6.json"
+		},
+		{
+			"name": "Generic PLA HF @Prusa MINIIS 0.8",
+			"sub_path": "filament/Generic PLA HF @Prusa MINIIS 0.8.json"
+		},
 		{
 			"name": "Generic PLA Silk @Prusa CORE One 0.6",
 			"sub_path": "filament/Generic PLA Silk @Prusa CORE One 0.6.json"
@@ -2452,6 +2368,26 @@
 			"name": "Generic PLA Silk @Prusa CORE One 0.8",
 			"sub_path": "filament/Generic PLA Silk @Prusa CORE One 0.8.json"
 		},
+		{
+			"name": "Generic PLA-CF @Prusa",
+			"sub_path": "filament/Generic PLA-CF @Prusa.json"
+		},
+		{
+			"name": "Generic PLA-CF @Prusa MINIIS",
+			"sub_path": "filament/Generic PLA-CF @Prusa MINIIS.json"
+		},
+		{
+			"name": "Generic PLA-CF @Prusa MINIIS 0.25",
+			"sub_path": "filament/Generic PLA-CF @Prusa MINIIS 0.25.json"
+		},
+		{
+			"name": "Generic PLA-CF @Prusa MINIIS 0.6",
+			"sub_path": "filament/Generic PLA-CF @Prusa MINIIS 0.6.json"
+		},
+		{
+			"name": "Generic PLA-CF @Prusa MINIIS 0.8",
+			"sub_path": "filament/Generic PLA-CF @Prusa MINIIS 0.8.json"
+		},
 		{
 			"name": "Prusament PLA @CORE One 0.6",
 			"sub_path": "filament/Prusament PLA @CORE One 0.6.json"
@@ -2476,6 +2412,14 @@
 			"name": "Prusament PLA @CORE One HF 0.8",
 			"sub_path": "filament/Prusament PLA @CORE One HF 0.8.json"
 		},
+		{
+			"name": "Prusament PLA @XL",
+			"sub_path": "filament/Prusament PLA @XL.json"
+		},
+		{
+			"name": "Prusament PLA @XL 5T",
+			"sub_path": "filament/Prusament PLA @XL 5T.json"
+		},
 		{
 			"name": "Prusament rPLA @CORE One 0.6",
 			"sub_path": "filament/Prusament rPLA @CORE One 0.6.json"
@@ -2484,6 +2428,46 @@
 			"name": "Prusament rPLA @CORE One 0.8",
 			"sub_path": "filament/Prusament rPLA @CORE One 0.8.json"
 		},
+		{
+			"name": "Prusament rPLA @XL",
+			"sub_path": "filament/Prusament rPLA @XL.json"
+		},
+		{
+			"name": "Prusament rPLA @XL 5T",
+			"sub_path": "filament/Prusament rPLA @XL 5T.json"
+		},
+		{
+			"name": "Generic PVA @Prusa",
+			"sub_path": "filament/Generic PVA @Prusa.json"
+		},
+		{
+			"name": "Generic PVA @Prusa MINIIS",
+			"sub_path": "filament/Generic PVA @Prusa MINIIS.json"
+		},
+		{
+			"name": "Generic PVA @Prusa MINIIS 0.25",
+			"sub_path": "filament/Generic PVA @Prusa MINIIS 0.25.json"
+		},
+		{
+			"name": "Generic PVA @Prusa MINIIS 0.6",
+			"sub_path": "filament/Generic PVA @Prusa MINIIS 0.6.json"
+		},
+		{
+			"name": "Generic PVA @Prusa MINIIS 0.8",
+			"sub_path": "filament/Generic PVA @Prusa MINIIS 0.8.json"
+		},
+		{
+			"name": "Generic PVA HF @Prusa MINIIS",
+			"sub_path": "filament/Generic PVA HF @Prusa MINIIS.json"
+		},
+		{
+			"name": "Generic PVA HF @Prusa MINIIS 0.6",
+			"sub_path": "filament/Generic PVA HF @Prusa MINIIS 0.6.json"
+		},
+		{
+			"name": "Generic PVA HF @Prusa MINIIS 0.8",
+			"sub_path": "filament/Generic PVA HF @Prusa MINIIS 0.8.json"
+		},
 		{
 			"name": "Prusament PVB @CORE One 0.6",
 			"sub_path": "filament/Prusament PVB @CORE One 0.6.json"
@@ -2500,6 +2484,22 @@
 			"name": "Generic TPU @Prusa MK4S 0.8",
 			"sub_path": "filament/Generic TPU @Prusa MK4S 0.8.json"
 		},
+		{
+			"name": "Generic TPU @Prusa",
+			"sub_path": "filament/Generic TPU @Prusa.json"
+		},
+		{
+			"name": "Generic TPU @Prusa MINIIS",
+			"sub_path": "filament/Generic TPU @Prusa MINIIS.json"
+		},
+		{
+			"name": "Generic TPU @Prusa MK4",
+			"sub_path": "filament/Generic TPU @Prusa MK4.json"
+		},
+		{
+			"name": "Generic TPU HF @Prusa MINIIS",
+			"sub_path": "filament/Generic TPU HF @Prusa MINIIS.json"
+		},
 		{
 			"name": "Generic ABS @Prusa MK4S HF0.5",
 			"sub_path": "filament/Generic ABS @Prusa MK4S HF0.5.json"

resources/profiles/Ratrig.json

@@ -276,26 +276,22 @@
 		}
 	],
 	"filament_list": [
-		{
-			"name": "Generic ABS BigNozzle @RatRig",
-			"sub_path": "filament/Generic ABS BigNozzle @RatRig.json"
-		},
 		{
 			"name": "Generic ABS @RatRig",
 			"sub_path": "filament/Generic ABS @RatRig.json"
 		},
 		{
-			"name": "RatRig PunkFil ABS",
-			"sub_path": "filament/RatRig PunkFil ABS.json"
-		},
-		{
-			"name": "Generic ASA BigNozzle @RatRig",
-			"sub_path": "filament/Generic ASA BigNozzle @RatRig.json"
+			"name": "Generic ABS BigNozzle @RatRig",
+			"sub_path": "filament/Generic ABS BigNozzle @RatRig.json"
 		},
 		{
 			"name": "Generic ASA @RatRig",
 			"sub_path": "filament/Generic ASA @RatRig.json"
 		},
+		{
+			"name": "Generic ASA BigNozzle @RatRig",
+			"sub_path": "filament/Generic ASA BigNozzle @RatRig.json"
+		},
 		{
 			"name": "Generic PA @RatRig",
 			"sub_path": "filament/Generic PA @RatRig.json"
@@ -308,38 +304,30 @@
 			"name": "Generic PC @RatRig",
 			"sub_path": "filament/Generic PC @RatRig.json"
 		},
-		{
-			"name": "Generic PCTG BigNozzle @RatRig",
-			"sub_path": "filament/Generic PCTG BigNozzle @RatRig.json"
-		},
-		{
-			"name": "Generic PETG BigNozzle @RatRig",
-			"sub_path": "filament/Generic PETG BigNozzle @RatRig.json"
-		},
 		{
 			"name": "Generic PCTG @RatRig",
 			"sub_path": "filament/Generic PCTG @RatRig.json"
 		},
+		{
+			"name": "Generic PCTG BigNozzle @RatRig",
+			"sub_path": "filament/Generic PCTG BigNozzle @RatRig.json"
+		},
 		{
 			"name": "Generic PETG @RatRig",
 			"sub_path": "filament/Generic PETG @RatRig.json"
 		},
 		{
-			"name": "RatRig PunkFil PETG",
-			"sub_path": "filament/RatRig PunkFil PETG.json"
-		},
-		{
-			"name": "RatRig PunkFil PETG CF",
-			"sub_path": "filament/RatRig PunkFil PETG CF.json"
-		},
-		{
-			"name": "Generic PLA BigNozzle @RatRig",
-			"sub_path": "filament/Generic PLA BigNozzle @RatRig.json"
+			"name": "Generic PETG BigNozzle @RatRig",
+			"sub_path": "filament/Generic PETG BigNozzle @RatRig.json"
 		},
 		{
 			"name": "Generic PLA @RatRig",
 			"sub_path": "filament/Generic PLA @RatRig.json"
 		},
+		{
+			"name": "Generic PLA BigNozzle @RatRig",
+			"sub_path": "filament/Generic PLA BigNozzle @RatRig.json"
+		},
 		{
 			"name": "Generic PLA-CF @RatRig",
 			"sub_path": "filament/Generic PLA-CF @RatRig.json"
@@ -348,13 +336,25 @@
 			"name": "Generic PVA @RatRig",
 			"sub_path": "filament/Generic PVA @RatRig.json"
 		},
+		{
+			"name": "Generic TPU @RatRig",
+			"sub_path": "filament/Generic TPU @RatRig.json"
+		},
 		{
 			"name": "Generic TPU BigNozzle @RatRig",
 			"sub_path": "filament/Generic TPU BigNozzle @RatRig.json"
 		},
 		{
-			"name": "Generic TPU @RatRig",
-			"sub_path": "filament/Generic TPU @RatRig.json"
+			"name": "RatRig PunkFil ABS",
+			"sub_path": "filament/RatRig PunkFil ABS.json"
+		},
+		{
+			"name": "RatRig PunkFil PETG",
+			"sub_path": "filament/RatRig PunkFil PETG.json"
+		},
+		{
+			"name": "RatRig PunkFil PETG CF",
+			"sub_path": "filament/RatRig PunkFil PETG CF.json"
 		}
 	],
 	"machine_list": [

resources/profiles/SeeMeCNC.json

@@ -1,6 +1,6 @@
 {
 	"name": "SeeMeCNC",
-	"version": "2.4.0.03",
+	"version": "2.4.0.04",
 	"force_update": "1",
 	"description": "SeeMeCNC configurations - Full profile set for Artemis, BOSSdelta, and RostockMAX printers",
 	"machine_model_list": [
@@ -50,10 +50,6 @@
 			"name": "SeeMeCNC process base 1.0mm",
 			"sub_path": "process/SeeMeCNC_process_base_1.0mm.json"
 		},
-		{
-			"name": "SeeMeCNC process base",
-			"sub_path": "process/SeeMeCNC_process_base.json"
-		},
 		{
 			"name": "0.16mm Fine @SeeMeCNC Artemis 0.4",
 			"sub_path": "process/0.16mm Fine @SeeMeCNC Artemis 0.4.json"
@@ -86,34 +82,6 @@
 			"name": "0.20mm Draft @SeeMeCNC RostockMAX v3.2 0.4",
 			"sub_path": "process/0.20mm Draft @SeeMeCNC RostockMAX v3.2 0.4.json"
 		},
-		{
-			"name": "0.20mm Fine @SeeMeCNC Artemis 0.5",
-			"sub_path": "process/0.20mm Fine @SeeMeCNC Artemis 0.5.json"
-		},
-		{
-			"name": "0.20mm Fine @SeeMeCNC BOSSdelta 300 0.5",
-			"sub_path": "process/0.20mm Fine @SeeMeCNC BOSSdelta 300 0.5.json"
-		},
-		{
-			"name": "0.20mm Fine @SeeMeCNC BOSSdelta 500 0505 0.5",
-			"sub_path": "process/0.20mm Fine @SeeMeCNC BOSSdelta 500 0505 0.5.json"
-		},
-		{
-			"name": "0.20mm Fine @SeeMeCNC BOSSdelta 500 0510 0.5",
-			"sub_path": "process/0.20mm Fine @SeeMeCNC BOSSdelta 500 0510 0.5.json"
-		},
-		{
-			"name": "0.20mm Fine @SeeMeCNC BOSSdelta 500 0521 0.5",
-			"sub_path": "process/0.20mm Fine @SeeMeCNC BOSSdelta 500 0521 0.5.json"
-		},
-		{
-			"name": "0.20mm Fine @SeeMeCNC RostockMAX v3.2 0.5",
-			"sub_path": "process/0.20mm Fine @SeeMeCNC RostockMAX v3.2 0.5.json"
-		},
-		{
-			"name": "0.20mm Fine @SeeMeCNC RostockMAX v4 0.5",
-			"sub_path": "process/0.20mm Fine @SeeMeCNC RostockMAX v4 0.5.json"
-		},
 		{
 			"name": "0.20mm Standard @SeeMeCNC Artemis 0.4",
 			"sub_path": "process/0.20mm Standard @SeeMeCNC Artemis 0.4.json"
@@ -170,34 +138,6 @@
 			"name": "0.24mm Draft @SeeMeCNC RostockMAX v4 0.4",
 			"sub_path": "process/0.24mm Draft @SeeMeCNC RostockMAX v4 0.4.json"
 		},
-		{
-			"name": "0.25mm Standard @SeeMeCNC Artemis 0.5",
-			"sub_path": "process/0.25mm Standard @SeeMeCNC Artemis 0.5.json"
-		},
-		{
-			"name": "0.25mm Standard @SeeMeCNC BOSSdelta 300 0.5",
-			"sub_path": "process/0.25mm Standard @SeeMeCNC BOSSdelta 300 0.5.json"
-		},
-		{
-			"name": "0.25mm Standard @SeeMeCNC BOSSdelta 500 0505 0.5",
-			"sub_path": "process/0.25mm Standard @SeeMeCNC BOSSdelta 500 0505 0.5.json"
-		},
-		{
-			"name": "0.25mm Standard @SeeMeCNC BOSSdelta 500 0510 0.5",
-			"sub_path": "process/0.25mm Standard @SeeMeCNC BOSSdelta 500 0510 0.5.json"
-		},
-		{
-			"name": "0.25mm Standard @SeeMeCNC BOSSdelta 500 0521 0.5",
-			"sub_path": "process/0.25mm Standard @SeeMeCNC BOSSdelta 500 0521 0.5.json"
-		},
-		{
-			"name": "0.25mm Standard @SeeMeCNC RostockMAX v3.2 0.5",
-			"sub_path": "process/0.25mm Standard @SeeMeCNC RostockMAX v3.2 0.5.json"
-		},
-		{
-			"name": "0.25mm Standard @SeeMeCNC RostockMAX v4 0.5",
-			"sub_path": "process/0.25mm Standard @SeeMeCNC RostockMAX v4 0.5.json"
-		},
 		{
 			"name": "0.28mm Extra Draft @SeeMeCNC Artemis 0.4",
 			"sub_path": "process/0.28mm Extra Draft @SeeMeCNC Artemis 0.4.json"
@@ -227,32 +167,60 @@
 			"sub_path": "process/0.28mm Extra Draft @SeeMeCNC RostockMAX v4 0.4.json"
 		},
 		{
-			"name": "0.28mm Fine @SeeMeCNC Artemis 0.7",
-			"sub_path": "process/0.28mm Fine @SeeMeCNC Artemis 0.7.json"
+			"name": "0.20mm Fine @SeeMeCNC Artemis 0.5",
+			"sub_path": "process/0.20mm Fine @SeeMeCNC Artemis 0.5.json"
 		},
 		{
-			"name": "0.28mm Fine @SeeMeCNC BOSSdelta 300 0.7",
-			"sub_path": "process/0.28mm Fine @SeeMeCNC BOSSdelta 300 0.7.json"
+			"name": "0.20mm Fine @SeeMeCNC BOSSdelta 300 0.5",
+			"sub_path": "process/0.20mm Fine @SeeMeCNC BOSSdelta 300 0.5.json"
 		},
 		{
-			"name": "0.28mm Fine @SeeMeCNC BOSSdelta 500 0505 0.7",
-			"sub_path": "process/0.28mm Fine @SeeMeCNC BOSSdelta 500 0505 0.7.json"
+			"name": "0.20mm Fine @SeeMeCNC BOSSdelta 500 0505 0.5",
+			"sub_path": "process/0.20mm Fine @SeeMeCNC BOSSdelta 500 0505 0.5.json"
 		},
 		{
-			"name": "0.28mm Fine @SeeMeCNC BOSSdelta 500 0510 0.7",
-			"sub_path": "process/0.28mm Fine @SeeMeCNC BOSSdelta 500 0510 0.7.json"
+			"name": "0.20mm Fine @SeeMeCNC BOSSdelta 500 0510 0.5",
+			"sub_path": "process/0.20mm Fine @SeeMeCNC BOSSdelta 500 0510 0.5.json"
 		},
 		{
-			"name": "0.28mm Fine @SeeMeCNC BOSSdelta 500 0521 0.7",
-			"sub_path": "process/0.28mm Fine @SeeMeCNC BOSSdelta 500 0521 0.7.json"
+			"name": "0.20mm Fine @SeeMeCNC BOSSdelta 500 0521 0.5",
+			"sub_path": "process/0.20mm Fine @SeeMeCNC BOSSdelta 500 0521 0.5.json"
 		},
 		{
-			"name": "0.28mm Fine @SeeMeCNC RostockMAX v3.2 0.7",
-			"sub_path": "process/0.28mm Fine @SeeMeCNC RostockMAX v3.2 0.7.json"
+			"name": "0.20mm Fine @SeeMeCNC RostockMAX v3.2 0.5",
+			"sub_path": "process/0.20mm Fine @SeeMeCNC RostockMAX v3.2 0.5.json"
 		},
 		{
-			"name": "0.28mm Fine @SeeMeCNC RostockMAX v4 0.7",
-			"sub_path": "process/0.28mm Fine @SeeMeCNC RostockMAX v4 0.7.json"
+			"name": "0.20mm Fine @SeeMeCNC RostockMAX v4 0.5",
+			"sub_path": "process/0.20mm Fine @SeeMeCNC RostockMAX v4 0.5.json"
+		},
+		{
+			"name": "0.25mm Standard @SeeMeCNC Artemis 0.5",
+			"sub_path": "process/0.25mm Standard @SeeMeCNC Artemis 0.5.json"
+		},
+		{
+			"name": "0.25mm Standard @SeeMeCNC BOSSdelta 300 0.5",
+			"sub_path": "process/0.25mm Standard @SeeMeCNC BOSSdelta 300 0.5.json"
+		},
+		{
+			"name": "0.25mm Standard @SeeMeCNC BOSSdelta 500 0505 0.5",
+			"sub_path": "process/0.25mm Standard @SeeMeCNC BOSSdelta 500 0505 0.5.json"
+		},
+		{
+			"name": "0.25mm Standard @SeeMeCNC BOSSdelta 500 0510 0.5",
+			"sub_path": "process/0.25mm Standard @SeeMeCNC BOSSdelta 500 0510 0.5.json"
+		},
+		{
+			"name": "0.25mm Standard @SeeMeCNC BOSSdelta 500 0521 0.5",
+			"sub_path": "process/0.25mm Standard @SeeMeCNC BOSSdelta 500 0521 0.5.json"
+		},
+		{
+			"name": "0.25mm Standard @SeeMeCNC RostockMAX v3.2 0.5",
+			"sub_path": "process/0.25mm Standard @SeeMeCNC RostockMAX v3.2 0.5.json"
+		},
+		{
+			"name": "0.25mm Standard @SeeMeCNC RostockMAX v4 0.5",
+			"sub_path": "process/0.25mm Standard @SeeMeCNC RostockMAX v4 0.5.json"
 		},
 		{
 			"name": "0.30mm Draft @SeeMeCNC Artemis 0.5",
@@ -282,34 +250,6 @@
 			"name": "0.30mm Draft @SeeMeCNC RostockMAX v4 0.5",
 			"sub_path": "process/0.30mm Draft @SeeMeCNC RostockMAX v4 0.5.json"
 		},
-		{
-			"name": "0.30mm TPU Solid @SeeMeCNC Artemis 0.7",
-			"sub_path": "process/0.30mm TPU Solid @SeeMeCNC Artemis 0.7.json"
-		},
-		{
-			"name": "0.30mm TPU Solid @SeeMeCNC BOSSdelta 300 0.7",
-			"sub_path": "process/0.30mm TPU Solid @SeeMeCNC BOSSdelta 300 0.7.json"
-		},
-		{
-			"name": "0.30mm TPU Solid @SeeMeCNC BOSSdelta 500 0505 0.7",
-			"sub_path": "process/0.30mm TPU Solid @SeeMeCNC BOSSdelta 500 0505 0.7.json"
-		},
-		{
-			"name": "0.30mm TPU Solid @SeeMeCNC BOSSdelta 500 0510 0.7",
-			"sub_path": "process/0.30mm TPU Solid @SeeMeCNC BOSSdelta 500 0510 0.7.json"
-		},
-		{
-			"name": "0.30mm TPU Solid @SeeMeCNC BOSSdelta 500 0521 0.7",
-			"sub_path": "process/0.30mm TPU Solid @SeeMeCNC BOSSdelta 500 0521 0.7.json"
-		},
-		{
-			"name": "0.30mm TPU Solid @SeeMeCNC RostockMAX v3.2 0.7",
-			"sub_path": "process/0.30mm TPU Solid @SeeMeCNC RostockMAX v3.2 0.7.json"
-		},
-		{
-			"name": "0.30mm TPU Solid @SeeMeCNC RostockMAX v4 0.7",
-			"sub_path": "process/0.30mm TPU Solid @SeeMeCNC RostockMAX v4 0.7.json"
-		},
 		{
 			"name": "0.35mm Extra Draft @SeeMeCNC Artemis 0.5",
 			"sub_path": "process/0.35mm Extra Draft @SeeMeCNC Artemis 0.5.json"
@@ -338,6 +278,62 @@
 			"name": "0.35mm Extra Draft @SeeMeCNC RostockMAX v4 0.5",
 			"sub_path": "process/0.35mm Extra Draft @SeeMeCNC RostockMAX v4 0.5.json"
 		},
+		{
+			"name": "0.28mm Fine @SeeMeCNC Artemis 0.7",
+			"sub_path": "process/0.28mm Fine @SeeMeCNC Artemis 0.7.json"
+		},
+		{
+			"name": "0.28mm Fine @SeeMeCNC BOSSdelta 300 0.7",
+			"sub_path": "process/0.28mm Fine @SeeMeCNC BOSSdelta 300 0.7.json"
+		},
+		{
+			"name": "0.28mm Fine @SeeMeCNC BOSSdelta 500 0505 0.7",
+			"sub_path": "process/0.28mm Fine @SeeMeCNC BOSSdelta 500 0505 0.7.json"
+		},
+		{
+			"name": "0.28mm Fine @SeeMeCNC BOSSdelta 500 0510 0.7",
+			"sub_path": "process/0.28mm Fine @SeeMeCNC BOSSdelta 500 0510 0.7.json"
+		},
+		{
+			"name": "0.28mm Fine @SeeMeCNC BOSSdelta 500 0521 0.7",
+			"sub_path": "process/0.28mm Fine @SeeMeCNC BOSSdelta 500 0521 0.7.json"
+		},
+		{
+			"name": "0.28mm Fine @SeeMeCNC RostockMAX v3.2 0.7",
+			"sub_path": "process/0.28mm Fine @SeeMeCNC RostockMAX v3.2 0.7.json"
+		},
+		{
+			"name": "0.28mm Fine @SeeMeCNC RostockMAX v4 0.7",
+			"sub_path": "process/0.28mm Fine @SeeMeCNC RostockMAX v4 0.7.json"
+		},
+		{
+			"name": "0.30mm TPU Solid @SeeMeCNC Artemis 0.7",
+			"sub_path": "process/0.30mm TPU Solid @SeeMeCNC Artemis 0.7.json"
+		},
+		{
+			"name": "0.30mm TPU Solid @SeeMeCNC BOSSdelta 300 0.7",
+			"sub_path": "process/0.30mm TPU Solid @SeeMeCNC BOSSdelta 300 0.7.json"
+		},
+		{
+			"name": "0.30mm TPU Solid @SeeMeCNC BOSSdelta 500 0505 0.7",
+			"sub_path": "process/0.30mm TPU Solid @SeeMeCNC BOSSdelta 500 0505 0.7.json"
+		},
+		{
+			"name": "0.30mm TPU Solid @SeeMeCNC BOSSdelta 500 0510 0.7",
+			"sub_path": "process/0.30mm TPU Solid @SeeMeCNC BOSSdelta 500 0510 0.7.json"
+		},
+		{
+			"name": "0.30mm TPU Solid @SeeMeCNC BOSSdelta 500 0521 0.7",
+			"sub_path": "process/0.30mm TPU Solid @SeeMeCNC BOSSdelta 500 0521 0.7.json"
+		},
+		{
+			"name": "0.30mm TPU Solid @SeeMeCNC RostockMAX v3.2 0.7",
+			"sub_path": "process/0.30mm TPU Solid @SeeMeCNC RostockMAX v3.2 0.7.json"
+		},
+		{
+			"name": "0.30mm TPU Solid @SeeMeCNC RostockMAX v4 0.7",
+			"sub_path": "process/0.30mm TPU Solid @SeeMeCNC RostockMAX v4 0.7.json"
+		},
 		{
 			"name": "0.35mm Standard @SeeMeCNC Artemis 0.7",
 			"sub_path": "process/0.35mm Standard @SeeMeCNC Artemis 0.7.json"
@@ -394,34 +390,6 @@
 			"name": "0.35mm TPU Vase @SeeMeCNC RostockMAX v4 0.7",
 			"sub_path": "process/0.35mm TPU Vase @SeeMeCNC RostockMAX v4 0.7.json"
 		},
-		{
-			"name": "0.40mm Fine @SeeMeCNC Artemis 1.0",
-			"sub_path": "process/0.40mm Fine @SeeMeCNC Artemis 1.0.json"
-		},
-		{
-			"name": "0.40mm Fine @SeeMeCNC BOSSdelta 300 1.0",
-			"sub_path": "process/0.40mm Fine @SeeMeCNC BOSSdelta 300 1.0.json"
-		},
-		{
-			"name": "0.40mm Fine @SeeMeCNC BOSSdelta 500 0505 1.0",
-			"sub_path": "process/0.40mm Fine @SeeMeCNC BOSSdelta 500 0505 1.0.json"
-		},
-		{
-			"name": "0.40mm Fine @SeeMeCNC BOSSdelta 500 0510 1.0",
-			"sub_path": "process/0.40mm Fine @SeeMeCNC BOSSdelta 500 0510 1.0.json"
-		},
-		{
-			"name": "0.40mm Fine @SeeMeCNC BOSSdelta 500 0521 1.0",
-			"sub_path": "process/0.40mm Fine @SeeMeCNC BOSSdelta 500 0521 1.0.json"
-		},
-		{
-			"name": "0.40mm Fine @SeeMeCNC RostockMAX v3.2 1.0",
-			"sub_path": "process/0.40mm Fine @SeeMeCNC RostockMAX v3.2 1.0.json"
-		},
-		{
-			"name": "0.40mm Fine @SeeMeCNC RostockMAX v4 1.0",
-			"sub_path": "process/0.40mm Fine @SeeMeCNC RostockMAX v4 1.0.json"
-		},
 		{
 			"name": "0.42mm Draft @SeeMeCNC Artemis 0.7",
 			"sub_path": "process/0.42mm Draft @SeeMeCNC Artemis 0.7.json"
@@ -478,6 +446,34 @@
 			"name": "0.49mm Extra Draft @SeeMeCNC RostockMAX v4 0.7",
 			"sub_path": "process/0.49mm Extra Draft @SeeMeCNC RostockMAX v4 0.7.json"
 		},
+		{
+			"name": "0.40mm Fine @SeeMeCNC Artemis 1.0",
+			"sub_path": "process/0.40mm Fine @SeeMeCNC Artemis 1.0.json"
+		},
+		{
+			"name": "0.40mm Fine @SeeMeCNC BOSSdelta 300 1.0",
+			"sub_path": "process/0.40mm Fine @SeeMeCNC BOSSdelta 300 1.0.json"
+		},
+		{
+			"name": "0.40mm Fine @SeeMeCNC BOSSdelta 500 0505 1.0",
+			"sub_path": "process/0.40mm Fine @SeeMeCNC BOSSdelta 500 0505 1.0.json"
+		},
+		{
+			"name": "0.40mm Fine @SeeMeCNC BOSSdelta 500 0510 1.0",
+			"sub_path": "process/0.40mm Fine @SeeMeCNC BOSSdelta 500 0510 1.0.json"
+		},
+		{
+			"name": "0.40mm Fine @SeeMeCNC BOSSdelta 500 0521 1.0",
+			"sub_path": "process/0.40mm Fine @SeeMeCNC BOSSdelta 500 0521 1.0.json"
+		},
+		{
+			"name": "0.40mm Fine @SeeMeCNC RostockMAX v3.2 1.0",
+			"sub_path": "process/0.40mm Fine @SeeMeCNC RostockMAX v3.2 1.0.json"
+		},
+		{
+			"name": "0.40mm Fine @SeeMeCNC RostockMAX v4 1.0",
+			"sub_path": "process/0.40mm Fine @SeeMeCNC RostockMAX v4 1.0.json"
+		},
 		{
 			"name": "0.50mm Standard @SeeMeCNC Artemis 1.0",
 			"sub_path": "process/0.50mm Standard @SeeMeCNC Artemis 1.0.json"
@@ -561,6 +557,10 @@
 		{
 			"name": "0.70mm Extra Draft @SeeMeCNC RostockMAX v4 1.0",
 			"sub_path": "process/0.70mm Extra Draft @SeeMeCNC RostockMAX v4 1.0.json"
+		},
+		{
+			"name": "SeeMeCNC process base",
+			"sub_path": "process/SeeMeCNC_process_base.json"
 		}
 	],
 	"filament_list": [

resources/profiles/SeeMeCNC/filament/SeeMeCNC_ABS_0_4mm.json

@@ -1,65 +0,0 @@
-{
-	"type": "filament",
-	"name": "SeeMeCNC ABS 0.4 nozzle",
-	"inherits": "SeeMeCNC ABS",
-	"from": "System",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"SeeMeCNC ABS 0.4 nozzle"
-	],
-	"compatible_printers": [
-		"SeeMeCNC Artemis 0.4 nozzle",
-		"SeeMeCNC BOSSdelta 500 0505 0.4 nozzle",
-		"SeeMeCNC BOSSdelta 500 0510 0.4 nozzle",
-		"SeeMeCNC BOSSdelta 500 0521 0.4 nozzle",
-		"SeeMeCNC BOSSdelta 300 0.4 nozzle",
-		"SeeMeCNC RostockMAX v3.2 0.4 nozzle",
-		"SeeMeCNC RostockMAX v4 0.4 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [
-		"0.16mm Fine @SeeMeCNC Artemis 0.4",
-		"0.16mm Fine @SeeMeCNC BOSSdelta 300 0.4",
-		"0.16mm Fine @SeeMeCNC BOSSdelta 500 0505 0.4",
-		"0.16mm Fine @SeeMeCNC BOSSdelta 500 0510 0.4",
-		"0.16mm Fine @SeeMeCNC BOSSdelta 500 0521 0.4",
-		"0.16mm Fine @SeeMeCNC RostockMAX v3.2 0.4",
-		"0.16mm Fine @SeeMeCNC RostockMAX v4 0.4",
-		"0.20mm Standard @SeeMeCNC Artemis 0.4",
-		"0.20mm Standard @SeeMeCNC BOSSdelta 300 0.4",
-		"0.20mm Standard @SeeMeCNC BOSSdelta 500 0505 0.4",
-		"0.20mm Standard @SeeMeCNC BOSSdelta 500 0510 0.4",
-		"0.20mm Standard @SeeMeCNC BOSSdelta 500 0521 0.4",
-		"0.20mm Standard @SeeMeCNC RostockMAX v3.2 0.4",
-		"0.20mm Standard @SeeMeCNC RostockMAX v4 0.4",
-		"0.24mm Draft @SeeMeCNC Artemis 0.4",
-		"0.24mm Draft @SeeMeCNC BOSSdelta 300 0.4",
-		"0.24mm Draft @SeeMeCNC BOSSdelta 500 0505 0.4",
-		"0.24mm Draft @SeeMeCNC BOSSdelta 500 0510 0.4",
-		"0.24mm Draft @SeeMeCNC BOSSdelta 500 0521 0.4",
-		"0.24mm Draft @SeeMeCNC RostockMAX v3.2 0.4",
-		"0.24mm Draft @SeeMeCNC RostockMAX v4 0.4",
-		"0.28mm Extra Draft @SeeMeCNC Artemis 0.4",
-		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 300 0.4",
-		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 0.4",
-		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 0.4",
-		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 0.4",
-		"0.28mm Extra Draft @SeeMeCNC RostockMAX v3.2 0.4",
-		"0.28mm Extra Draft @SeeMeCNC RostockMAX v4 0.4"
-	],
-	"compatible_prints_condition": "",
-	"filament_retraction_length": [
-		"5"
-	],
-	"filament_z_hop": [
-		"0.2"
-	],
-	"filament_retraction_speed": [
-		"45"
-	],
-	"filament_deretraction_speed": [
-		"35"
-	],
-	"setting_id": "FOSiDadyHyp8WKTb",
-	"filament_id": "SMCFB00104"
-}

resources/profiles/SeeMeCNC/filament/SeeMeCNC_ABS_0_5mm.json

@@ -1,65 +0,0 @@
-{
-	"type": "filament",
-	"name": "SeeMeCNC ABS 0.5 nozzle",
-	"inherits": "SeeMeCNC ABS",
-	"from": "System",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"SeeMeCNC ABS 0.5 nozzle"
-	],
-	"compatible_printers": [
-		"SeeMeCNC Artemis 0.5 nozzle",
-		"SeeMeCNC BOSSdelta 500 0505 0.5 nozzle",
-		"SeeMeCNC BOSSdelta 500 0510 0.5 nozzle",
-		"SeeMeCNC BOSSdelta 500 0521 0.5 nozzle",
-		"SeeMeCNC BOSSdelta 300 0.5 nozzle",
-		"SeeMeCNC RostockMAX v3.2 0.5 nozzle",
-		"SeeMeCNC RostockMAX v4 0.5 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [
-		"0.20mm Fine @SeeMeCNC Artemis 0.5",
-		"0.20mm Fine @SeeMeCNC BOSSdelta 300 0.5",
-		"0.20mm Fine @SeeMeCNC BOSSdelta 500 0505 0.5",
-		"0.20mm Fine @SeeMeCNC BOSSdelta 500 0510 0.5",
-		"0.20mm Fine @SeeMeCNC BOSSdelta 500 0521 0.5",
-		"0.20mm Fine @SeeMeCNC RostockMAX v3.2 0.5",
-		"0.20mm Fine @SeeMeCNC RostockMAX v4 0.5",
-		"0.25mm Standard @SeeMeCNC Artemis 0.5",
-		"0.25mm Standard @SeeMeCNC BOSSdelta 300 0.5",
-		"0.25mm Standard @SeeMeCNC BOSSdelta 500 0505 0.5",
-		"0.25mm Standard @SeeMeCNC BOSSdelta 500 0510 0.5",
-		"0.25mm Standard @SeeMeCNC BOSSdelta 500 0521 0.5",
-		"0.25mm Standard @SeeMeCNC RostockMAX v3.2 0.5",
-		"0.25mm Standard @SeeMeCNC RostockMAX v4 0.5",
-		"0.30mm Draft @SeeMeCNC Artemis 0.5",
-		"0.30mm Draft @SeeMeCNC BOSSdelta 300 0.5",
-		"0.30mm Draft @SeeMeCNC BOSSdelta 500 0505 0.5",
-		"0.30mm Draft @SeeMeCNC BOSSdelta 500 0510 0.5",
-		"0.30mm Draft @SeeMeCNC BOSSdelta 500 0521 0.5",
-		"0.30mm Draft @SeeMeCNC RostockMAX v3.2 0.5",
-		"0.30mm Draft @SeeMeCNC RostockMAX v4 0.5",
-		"0.35mm Extra Draft @SeeMeCNC Artemis 0.5",
-		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 300 0.5",
-		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 0.5",
-		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 0.5",
-		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 0.5",
-		"0.35mm Extra Draft @SeeMeCNC RostockMAX v3.2 0.5",
-		"0.35mm Extra Draft @SeeMeCNC RostockMAX v4 0.5"
-	],
-	"compatible_prints_condition": "",
-	"filament_retraction_length": [
-		"5"
-	],
-	"filament_z_hop": [
-		"0.3"
-	],
-	"filament_retraction_speed": [
-		"45"
-	],
-	"filament_deretraction_speed": [
-		"35"
-	],
-	"setting_id": "XzvEoqhK0cx7JieM",
-	"filament_id": "SMCFB00105"
-}

resources/profiles/SeeMeCNC/filament/SeeMeCNC_ABS_0_7mm.json

@@ -1,65 +0,0 @@
-{
-	"type": "filament",
-	"name": "SeeMeCNC ABS 0.7 nozzle",
-	"inherits": "SeeMeCNC ABS",
-	"from": "System",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"SeeMeCNC ABS 0.7 nozzle"
-	],
-	"compatible_printers": [
-		"SeeMeCNC Artemis 0.7 nozzle",
-		"SeeMeCNC BOSSdelta 500 0505 0.7 nozzle",
-		"SeeMeCNC BOSSdelta 500 0510 0.7 nozzle",
-		"SeeMeCNC BOSSdelta 500 0521 0.7 nozzle",
-		"SeeMeCNC BOSSdelta 300 0.7 nozzle",
-		"SeeMeCNC RostockMAX v3.2 0.7 nozzle",
-		"SeeMeCNC RostockMAX v4 0.7 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [
-		"0.28mm Fine @SeeMeCNC Artemis 0.7",
-		"0.28mm Fine @SeeMeCNC BOSSdelta 300 0.7",
-		"0.28mm Fine @SeeMeCNC BOSSdelta 500 0505 0.7",
-		"0.28mm Fine @SeeMeCNC BOSSdelta 500 0510 0.7",
-		"0.28mm Fine @SeeMeCNC BOSSdelta 500 0521 0.7",
-		"0.28mm Fine @SeeMeCNC RostockMAX v3.2 0.7",
-		"0.28mm Fine @SeeMeCNC RostockMAX v4 0.7",
-		"0.35mm Standard @SeeMeCNC Artemis 0.7",
-		"0.35mm Standard @SeeMeCNC BOSSdelta 300 0.7",
-		"0.35mm Standard @SeeMeCNC BOSSdelta 500 0505 0.7",
-		"0.35mm Standard @SeeMeCNC BOSSdelta 500 0510 0.7",
-		"0.35mm Standard @SeeMeCNC BOSSdelta 500 0521 0.7",
-		"0.35mm Standard @SeeMeCNC RostockMAX v3.2 0.7",
-		"0.35mm Standard @SeeMeCNC RostockMAX v4 0.7",
-		"0.42mm Draft @SeeMeCNC Artemis 0.7",
-		"0.42mm Draft @SeeMeCNC BOSSdelta 300 0.7",
-		"0.42mm Draft @SeeMeCNC BOSSdelta 500 0505 0.7",
-		"0.42mm Draft @SeeMeCNC BOSSdelta 500 0510 0.7",
-		"0.42mm Draft @SeeMeCNC BOSSdelta 500 0521 0.7",
-		"0.42mm Draft @SeeMeCNC RostockMAX v3.2 0.7",
-		"0.42mm Draft @SeeMeCNC RostockMAX v4 0.7",
-		"0.49mm Extra Draft @SeeMeCNC Artemis 0.7",
-		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 300 0.7",
-		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 0.7",
-		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 0.7",
-		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 0.7",
-		"0.49mm Extra Draft @SeeMeCNC RostockMAX v3.2 0.7",
-		"0.49mm Extra Draft @SeeMeCNC RostockMAX v4 0.7"
-	],
-	"compatible_prints_condition": "",
-	"filament_retraction_length": [
-		"6"
-	],
-	"filament_z_hop": [
-		"0.4"
-	],
-	"filament_retraction_speed": [
-		"45"
-	],
-	"filament_deretraction_speed": [
-		"35"
-	],
-	"setting_id": "RbmLGSWPaVvl0NNr",
-	"filament_id": "SMCFB00107"
-}

resources/profiles/SeeMeCNC/filament/SeeMeCNC_ABS_1_0mm.json

@@ -1,65 +0,0 @@
-{
-	"type": "filament",
-	"name": "SeeMeCNC ABS 1.0 nozzle",
-	"inherits": "SeeMeCNC ABS",
-	"from": "System",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"SeeMeCNC ABS 1.0 nozzle"
-	],
-	"compatible_printers": [
-		"SeeMeCNC Artemis 1.0 nozzle",
-		"SeeMeCNC BOSSdelta 500 0505 1.0 nozzle",
-		"SeeMeCNC BOSSdelta 500 0510 1.0 nozzle",
-		"SeeMeCNC BOSSdelta 500 0521 1.0 nozzle",
-		"SeeMeCNC BOSSdelta 300 1.0 nozzle",
-		"SeeMeCNC RostockMAX v3.2 1.0 nozzle",
-		"SeeMeCNC RostockMAX v4 1.0 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [
-		"0.40mm Fine @SeeMeCNC Artemis 1.0",
-		"0.40mm Fine @SeeMeCNC BOSSdelta 300 1.0",
-		"0.40mm Fine @SeeMeCNC BOSSdelta 500 0505 1.0",
-		"0.40mm Fine @SeeMeCNC BOSSdelta 500 0510 1.0",
-		"0.40mm Fine @SeeMeCNC BOSSdelta 500 0521 1.0",
-		"0.40mm Fine @SeeMeCNC RostockMAX v3.2 1.0",
-		"0.40mm Fine @SeeMeCNC RostockMAX v4 1.0",
-		"0.50mm Standard @SeeMeCNC Artemis 1.0",
-		"0.50mm Standard @SeeMeCNC BOSSdelta 300 1.0",
-		"0.50mm Standard @SeeMeCNC BOSSdelta 500 0505 1.0",
-		"0.50mm Standard @SeeMeCNC BOSSdelta 500 0510 1.0",
-		"0.50mm Standard @SeeMeCNC BOSSdelta 500 0521 1.0",
-		"0.50mm Standard @SeeMeCNC RostockMAX v3.2 1.0",
-		"0.50mm Standard @SeeMeCNC RostockMAX v4 1.0",
-		"0.60mm Draft @SeeMeCNC Artemis 1.0",
-		"0.60mm Draft @SeeMeCNC BOSSdelta 300 1.0",
-		"0.60mm Draft @SeeMeCNC BOSSdelta 500 0505 1.0",
-		"0.60mm Draft @SeeMeCNC BOSSdelta 500 0510 1.0",
-		"0.60mm Draft @SeeMeCNC BOSSdelta 500 0521 1.0",
-		"0.60mm Draft @SeeMeCNC RostockMAX v3.2 1.0",
-		"0.60mm Draft @SeeMeCNC RostockMAX v4 1.0",
-		"0.70mm Extra Draft @SeeMeCNC Artemis 1.0",
-		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 300 1.0",
-		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 1.0",
-		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 1.0",
-		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 1.0",
-		"0.70mm Extra Draft @SeeMeCNC RostockMAX v3.2 1.0",
-		"0.70mm Extra Draft @SeeMeCNC RostockMAX v4 1.0"
-	],
-	"compatible_prints_condition": "",
-	"filament_retraction_length": [
-		"6"
-	],
-	"filament_z_hop": [
-		"0.5"
-	],
-	"filament_retraction_speed": [
-		"45"
-	],
-	"filament_deretraction_speed": [
-		"35"
-	],
-	"setting_id": "DTcAxACOOtdvD43R",
-	"filament_id": "SMCFB00110"
-}

resources/profiles/SeeMeCNC/filament/SeeMeCNC_PA_CF_0_4mm.json

@@ -1,65 +0,0 @@
-{
-	"type": "filament",
-	"name": "SeeMeCNC PA-CF 0.4 nozzle",
-	"inherits": "SeeMeCNC PA-CF",
-	"from": "System",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"SeeMeCNC PA-CF 0.4 nozzle"
-	],
-	"compatible_printers": [
-		"SeeMeCNC Artemis 0.4 nozzle",
-		"SeeMeCNC BOSSdelta 500 0505 0.4 nozzle",
-		"SeeMeCNC BOSSdelta 500 0510 0.4 nozzle",
-		"SeeMeCNC BOSSdelta 500 0521 0.4 nozzle",
-		"SeeMeCNC BOSSdelta 300 0.4 nozzle",
-		"SeeMeCNC RostockMAX v3.2 0.4 nozzle",
-		"SeeMeCNC RostockMAX v4 0.4 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [
-		"0.16mm Fine @SeeMeCNC Artemis 0.4",
-		"0.16mm Fine @SeeMeCNC BOSSdelta 300 0.4",
-		"0.16mm Fine @SeeMeCNC BOSSdelta 500 0505 0.4",
-		"0.16mm Fine @SeeMeCNC BOSSdelta 500 0510 0.4",
-		"0.16mm Fine @SeeMeCNC BOSSdelta 500 0521 0.4",
-		"0.16mm Fine @SeeMeCNC RostockMAX v3.2 0.4",
-		"0.16mm Fine @SeeMeCNC RostockMAX v4 0.4",
-		"0.20mm Standard @SeeMeCNC Artemis 0.4",
-		"0.20mm Standard @SeeMeCNC BOSSdelta 300 0.4",
-		"0.20mm Standard @SeeMeCNC BOSSdelta 500 0505 0.4",
-		"0.20mm Standard @SeeMeCNC BOSSdelta 500 0510 0.4",
-		"0.20mm Standard @SeeMeCNC BOSSdelta 500 0521 0.4",
-		"0.20mm Standard @SeeMeCNC RostockMAX v3.2 0.4",
-		"0.20mm Standard @SeeMeCNC RostockMAX v4 0.4",
-		"0.24mm Draft @SeeMeCNC Artemis 0.4",
-		"0.24mm Draft @SeeMeCNC BOSSdelta 300 0.4",
-		"0.24mm Draft @SeeMeCNC BOSSdelta 500 0505 0.4",
-		"0.24mm Draft @SeeMeCNC BOSSdelta 500 0510 0.4",
-		"0.24mm Draft @SeeMeCNC BOSSdelta 500 0521 0.4",
-		"0.24mm Draft @SeeMeCNC RostockMAX v3.2 0.4",
-		"0.24mm Draft @SeeMeCNC RostockMAX v4 0.4",
-		"0.28mm Extra Draft @SeeMeCNC Artemis 0.4",
-		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 300 0.4",
-		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 0.4",
-		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 0.4",
-		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 0.4",
-		"0.28mm Extra Draft @SeeMeCNC RostockMAX v3.2 0.4",
-		"0.28mm Extra Draft @SeeMeCNC RostockMAX v4 0.4"
-	],
-	"compatible_prints_condition": "",
-	"filament_retraction_length": [
-		"5"
-	],
-	"filament_z_hop": [
-		"0.2"
-	],
-	"filament_retraction_speed": [
-		"40"
-	],
-	"filament_deretraction_speed": [
-		"30"
-	],
-	"setting_id": "jf0puhp8kCuwL3jt",
-	"filament_id": "SMCFN00104"
-}

resources/profiles/SeeMeCNC/filament/SeeMeCNC_PA_CF_0_5mm.json

@@ -1,65 +0,0 @@
-{
-	"type": "filament",
-	"name": "SeeMeCNC PA-CF 0.5 nozzle",
-	"inherits": "SeeMeCNC PA-CF",
-	"from": "System",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"SeeMeCNC PA-CF 0.5 nozzle"
-	],
-	"compatible_printers": [
-		"SeeMeCNC Artemis 0.5 nozzle",
-		"SeeMeCNC BOSSdelta 500 0505 0.5 nozzle",
-		"SeeMeCNC BOSSdelta 500 0510 0.5 nozzle",
-		"SeeMeCNC BOSSdelta 500 0521 0.5 nozzle",
-		"SeeMeCNC BOSSdelta 300 0.5 nozzle",
-		"SeeMeCNC RostockMAX v3.2 0.5 nozzle",
-		"SeeMeCNC RostockMAX v4 0.5 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [
-		"0.20mm Fine @SeeMeCNC Artemis 0.5",
-		"0.20mm Fine @SeeMeCNC BOSSdelta 300 0.5",
-		"0.20mm Fine @SeeMeCNC BOSSdelta 500 0505 0.5",
-		"0.20mm Fine @SeeMeCNC BOSSdelta 500 0510 0.5",
-		"0.20mm Fine @SeeMeCNC BOSSdelta 500 0521 0.5",
-		"0.20mm Fine @SeeMeCNC RostockMAX v3.2 0.5",
-		"0.20mm Fine @SeeMeCNC RostockMAX v4 0.5",
-		"0.25mm Standard @SeeMeCNC Artemis 0.5",
-		"0.25mm Standard @SeeMeCNC BOSSdelta 300 0.5",
-		"0.25mm Standard @SeeMeCNC BOSSdelta 500 0505 0.5",
-		"0.25mm Standard @SeeMeCNC BOSSdelta 500 0510 0.5",
-		"0.25mm Standard @SeeMeCNC BOSSdelta 500 0521 0.5",
-		"0.25mm Standard @SeeMeCNC RostockMAX v3.2 0.5",
-		"0.25mm Standard @SeeMeCNC RostockMAX v4 0.5",
-		"0.30mm Draft @SeeMeCNC Artemis 0.5",
-		"0.30mm Draft @SeeMeCNC BOSSdelta 300 0.5",
-		"0.30mm Draft @SeeMeCNC BOSSdelta 500 0505 0.5",
-		"0.30mm Draft @SeeMeCNC BOSSdelta 500 0510 0.5",
-		"0.30mm Draft @SeeMeCNC BOSSdelta 500 0521 0.5",
-		"0.30mm Draft @SeeMeCNC RostockMAX v3.2 0.5",
-		"0.30mm Draft @SeeMeCNC RostockMAX v4 0.5",
-		"0.35mm Extra Draft @SeeMeCNC Artemis 0.5",
-		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 300 0.5",
-		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 0.5",
-		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 0.5",
-		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 0.5",
-		"0.35mm Extra Draft @SeeMeCNC RostockMAX v3.2 0.5",
-		"0.35mm Extra Draft @SeeMeCNC RostockMAX v4 0.5"
-	],
-	"compatible_prints_condition": "",
-	"filament_retraction_length": [
-		"5"
-	],
-	"filament_z_hop": [
-		"0.3"
-	],
-	"filament_retraction_speed": [
-		"40"
-	],
-	"filament_deretraction_speed": [
-		"30"
-	],
-	"setting_id": "c3gXbtFjJn4aK7pL",
-	"filament_id": "SMCFN00105"
-}

resources/profiles/SeeMeCNC/filament/SeeMeCNC_PA_CF_0_7mm.json

@@ -1,65 +0,0 @@
-{
-	"type": "filament",
-	"name": "SeeMeCNC PA-CF 0.7 nozzle",
-	"inherits": "SeeMeCNC PA-CF",
-	"from": "System",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"SeeMeCNC PA-CF 0.7 nozzle"
-	],
-	"compatible_printers": [
-		"SeeMeCNC Artemis 0.7 nozzle",
-		"SeeMeCNC BOSSdelta 500 0505 0.7 nozzle",
-		"SeeMeCNC BOSSdelta 500 0510 0.7 nozzle",
-		"SeeMeCNC BOSSdelta 500 0521 0.7 nozzle",
-		"SeeMeCNC BOSSdelta 300 0.7 nozzle",
-		"SeeMeCNC RostockMAX v3.2 0.7 nozzle",
-		"SeeMeCNC RostockMAX v4 0.7 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [
-		"0.28mm Fine @SeeMeCNC Artemis 0.7",
-		"0.28mm Fine @SeeMeCNC BOSSdelta 300 0.7",
-		"0.28mm Fine @SeeMeCNC BOSSdelta 500 0505 0.7",
-		"0.28mm Fine @SeeMeCNC BOSSdelta 500 0510 0.7",
-		"0.28mm Fine @SeeMeCNC BOSSdelta 500 0521 0.7",
-		"0.28mm Fine @SeeMeCNC RostockMAX v3.2 0.7",
-		"0.28mm Fine @SeeMeCNC RostockMAX v4 0.7",
-		"0.35mm Standard @SeeMeCNC Artemis 0.7",
-		"0.35mm Standard @SeeMeCNC BOSSdelta 300 0.7",
-		"0.35mm Standard @SeeMeCNC BOSSdelta 500 0505 0.7",
-		"0.35mm Standard @SeeMeCNC BOSSdelta 500 0510 0.7",
-		"0.35mm Standard @SeeMeCNC BOSSdelta 500 0521 0.7",
-		"0.35mm Standard @SeeMeCNC RostockMAX v3.2 0.7",
-		"0.35mm Standard @SeeMeCNC RostockMAX v4 0.7",
-		"0.42mm Draft @SeeMeCNC Artemis 0.7",
-		"0.42mm Draft @SeeMeCNC BOSSdelta 300 0.7",
-		"0.42mm Draft @SeeMeCNC BOSSdelta 500 0505 0.7",
-		"0.42mm Draft @SeeMeCNC BOSSdelta 500 0510 0.7",
-		"0.42mm Draft @SeeMeCNC BOSSdelta 500 0521 0.7",
-		"0.42mm Draft @SeeMeCNC RostockMAX v3.2 0.7",
-		"0.42mm Draft @SeeMeCNC RostockMAX v4 0.7",
-		"0.49mm Extra Draft @SeeMeCNC Artemis 0.7",
-		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 300 0.7",
-		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 0.7",
-		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 0.7",
-		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 0.7",
-		"0.49mm Extra Draft @SeeMeCNC RostockMAX v3.2 0.7",
-		"0.49mm Extra Draft @SeeMeCNC RostockMAX v4 0.7"
-	],
-	"compatible_prints_condition": "",
-	"filament_retraction_length": [
-		"6"
-	],
-	"filament_z_hop": [
-		"0.4"
-	],
-	"filament_retraction_speed": [
-		"40"
-	],
-	"filament_deretraction_speed": [
-		"30"
-	],
-	"setting_id": "7sDIfUAs3Ftv7uUD",
-	"filament_id": "SMCFN00107"
-}

resources/profiles/SeeMeCNC/filament/SeeMeCNC_PA_CF_1_0mm.json

@@ -1,65 +0,0 @@
-{
-	"type": "filament",
-	"name": "SeeMeCNC PA-CF 1.0 nozzle",
-	"inherits": "SeeMeCNC PA-CF",
-	"from": "System",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"SeeMeCNC PA-CF 1.0 nozzle"
-	],
-	"compatible_printers": [
-		"SeeMeCNC Artemis 1.0 nozzle",
-		"SeeMeCNC BOSSdelta 500 0505 1.0 nozzle",
-		"SeeMeCNC BOSSdelta 500 0510 1.0 nozzle",
-		"SeeMeCNC BOSSdelta 500 0521 1.0 nozzle",
-		"SeeMeCNC BOSSdelta 300 1.0 nozzle",
-		"SeeMeCNC RostockMAX v3.2 1.0 nozzle",
-		"SeeMeCNC RostockMAX v4 1.0 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [
-		"0.40mm Fine @SeeMeCNC Artemis 1.0",
-		"0.40mm Fine @SeeMeCNC BOSSdelta 300 1.0",
-		"0.40mm Fine @SeeMeCNC BOSSdelta 500 0505 1.0",
-		"0.40mm Fine @SeeMeCNC BOSSdelta 500 0510 1.0",
-		"0.40mm Fine @SeeMeCNC BOSSdelta 500 0521 1.0",
-		"0.40mm Fine @SeeMeCNC RostockMAX v3.2 1.0",
-		"0.40mm Fine @SeeMeCNC RostockMAX v4 1.0",
-		"0.50mm Standard @SeeMeCNC Artemis 1.0",
-		"0.50mm Standard @SeeMeCNC BOSSdelta 300 1.0",
-		"0.50mm Standard @SeeMeCNC BOSSdelta 500 0505 1.0",
-		"0.50mm Standard @SeeMeCNC BOSSdelta 500 0510 1.0",
-		"0.50mm Standard @SeeMeCNC BOSSdelta 500 0521 1.0",
-		"0.50mm Standard @SeeMeCNC RostockMAX v3.2 1.0",
-		"0.50mm Standard @SeeMeCNC RostockMAX v4 1.0",
-		"0.60mm Draft @SeeMeCNC Artemis 1.0",
-		"0.60mm Draft @SeeMeCNC BOSSdelta 300 1.0",
-		"0.60mm Draft @SeeMeCNC BOSSdelta 500 0505 1.0",
-		"0.60mm Draft @SeeMeCNC BOSSdelta 500 0510 1.0",
-		"0.60mm Draft @SeeMeCNC BOSSdelta 500 0521 1.0",
-		"0.60mm Draft @SeeMeCNC RostockMAX v3.2 1.0",
-		"0.60mm Draft @SeeMeCNC RostockMAX v4 1.0",
-		"0.70mm Extra Draft @SeeMeCNC Artemis 1.0",
-		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 300 1.0",
-		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 1.0",
-		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 1.0",
-		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 1.0",
-		"0.70mm Extra Draft @SeeMeCNC RostockMAX v3.2 1.0",
-		"0.70mm Extra Draft @SeeMeCNC RostockMAX v4 1.0"
-	],
-	"compatible_prints_condition": "",
-	"filament_retraction_length": [
-		"6"
-	],
-	"filament_z_hop": [
-		"0.5"
-	],
-	"filament_retraction_speed": [
-		"40"
-	],
-	"filament_deretraction_speed": [
-		"30"
-	],
-	"setting_id": "nr7CBE99WoHXy4Dw",
-	"filament_id": "SMCFN00110"
-}

resources/profiles/SeeMeCNC/filament/SeeMeCNC_PETG_0_4mm.json

@@ -1,65 +0,0 @@
-{
-	"type": "filament",
-	"name": "SeeMeCNC PETG 0.4 nozzle",
-	"inherits": "SeeMeCNC PETG",
-	"from": "System",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"SeeMeCNC PETG 0.4 nozzle"
-	],
-	"compatible_printers": [
-		"SeeMeCNC Artemis 0.4 nozzle",
-		"SeeMeCNC BOSSdelta 500 0505 0.4 nozzle",
-		"SeeMeCNC BOSSdelta 500 0510 0.4 nozzle",
-		"SeeMeCNC BOSSdelta 500 0521 0.4 nozzle",
-		"SeeMeCNC BOSSdelta 300 0.4 nozzle",
-		"SeeMeCNC RostockMAX v3.2 0.4 nozzle",
-		"SeeMeCNC RostockMAX v4 0.4 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [
-		"0.16mm Fine @SeeMeCNC Artemis 0.4",
-		"0.16mm Fine @SeeMeCNC BOSSdelta 300 0.4",
-		"0.16mm Fine @SeeMeCNC BOSSdelta 500 0505 0.4",
-		"0.16mm Fine @SeeMeCNC BOSSdelta 500 0510 0.4",
-		"0.16mm Fine @SeeMeCNC BOSSdelta 500 0521 0.4",
-		"0.16mm Fine @SeeMeCNC RostockMAX v3.2 0.4",
-		"0.16mm Fine @SeeMeCNC RostockMAX v4 0.4",
-		"0.20mm Standard @SeeMeCNC Artemis 0.4",
-		"0.20mm Standard @SeeMeCNC BOSSdelta 300 0.4",
-		"0.20mm Standard @SeeMeCNC BOSSdelta 500 0505 0.4",
-		"0.20mm Standard @SeeMeCNC BOSSdelta 500 0510 0.4",
-		"0.20mm Standard @SeeMeCNC BOSSdelta 500 0521 0.4",
-		"0.20mm Standard @SeeMeCNC RostockMAX v3.2 0.4",
-		"0.20mm Standard @SeeMeCNC RostockMAX v4 0.4",
-		"0.24mm Draft @SeeMeCNC Artemis 0.4",
-		"0.24mm Draft @SeeMeCNC BOSSdelta 300 0.4",
-		"0.24mm Draft @SeeMeCNC BOSSdelta 500 0505 0.4",
-		"0.24mm Draft @SeeMeCNC BOSSdelta 500 0510 0.4",
-		"0.24mm Draft @SeeMeCNC BOSSdelta 500 0521 0.4",
-		"0.24mm Draft @SeeMeCNC RostockMAX v3.2 0.4",
-		"0.24mm Draft @SeeMeCNC RostockMAX v4 0.4",
-		"0.28mm Extra Draft @SeeMeCNC Artemis 0.4",
-		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 300 0.4",
-		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 0.4",
-		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 0.4",
-		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 0.4",
-		"0.28mm Extra Draft @SeeMeCNC RostockMAX v3.2 0.4",
-		"0.28mm Extra Draft @SeeMeCNC RostockMAX v4 0.4"
-	],
-	"compatible_prints_condition": "",
-	"filament_retraction_length": [
-		"5"
-	],
-	"filament_z_hop": [
-		"0.2"
-	],
-	"filament_retraction_speed": [
-		"40"
-	],
-	"filament_deretraction_speed": [
-		"30"
-	],
-	"setting_id": "kqCiusj7FAzbmnro",
-	"filament_id": "SMCFG00104"
-}

resources/profiles/SeeMeCNC/filament/SeeMeCNC_PETG_0_5mm.json

@@ -1,65 +0,0 @@
-{
-	"type": "filament",
-	"name": "SeeMeCNC PETG 0.5 nozzle",
-	"inherits": "SeeMeCNC PETG",
-	"from": "System",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"SeeMeCNC PETG 0.5 nozzle"
-	],
-	"compatible_printers": [
-		"SeeMeCNC Artemis 0.5 nozzle",
-		"SeeMeCNC BOSSdelta 500 0505 0.5 nozzle",
-		"SeeMeCNC BOSSdelta 500 0510 0.5 nozzle",
-		"SeeMeCNC BOSSdelta 500 0521 0.5 nozzle",
-		"SeeMeCNC BOSSdelta 300 0.5 nozzle",
-		"SeeMeCNC RostockMAX v3.2 0.5 nozzle",
-		"SeeMeCNC RostockMAX v4 0.5 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [
-		"0.20mm Fine @SeeMeCNC Artemis 0.5",
-		"0.20mm Fine @SeeMeCNC BOSSdelta 300 0.5",
-		"0.20mm Fine @SeeMeCNC BOSSdelta 500 0505 0.5",
-		"0.20mm Fine @SeeMeCNC BOSSdelta 500 0510 0.5",
-		"0.20mm Fine @SeeMeCNC BOSSdelta 500 0521 0.5",
-		"0.20mm Fine @SeeMeCNC RostockMAX v3.2 0.5",
-		"0.20mm Fine @SeeMeCNC RostockMAX v4 0.5",
-		"0.25mm Standard @SeeMeCNC Artemis 0.5",
-		"0.25mm Standard @SeeMeCNC BOSSdelta 300 0.5",
-		"0.25mm Standard @SeeMeCNC BOSSdelta 500 0505 0.5",
-		"0.25mm Standard @SeeMeCNC BOSSdelta 500 0510 0.5",
-		"0.25mm Standard @SeeMeCNC BOSSdelta 500 0521 0.5",
-		"0.25mm Standard @SeeMeCNC RostockMAX v3.2 0.5",
-		"0.25mm Standard @SeeMeCNC RostockMAX v4 0.5",
-		"0.30mm Draft @SeeMeCNC Artemis 0.5",
-		"0.30mm Draft @SeeMeCNC BOSSdelta 300 0.5",
-		"0.30mm Draft @SeeMeCNC BOSSdelta 500 0505 0.5",
-		"0.30mm Draft @SeeMeCNC BOSSdelta 500 0510 0.5",
-		"0.30mm Draft @SeeMeCNC BOSSdelta 500 0521 0.5",
-		"0.30mm Draft @SeeMeCNC RostockMAX v3.2 0.5",
-		"0.30mm Draft @SeeMeCNC RostockMAX v4 0.5",
-		"0.35mm Extra Draft @SeeMeCNC Artemis 0.5",
-		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 300 0.5",
-		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 0.5",
-		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 0.5",
-		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 0.5",
-		"0.35mm Extra Draft @SeeMeCNC RostockMAX v3.2 0.5",
-		"0.35mm Extra Draft @SeeMeCNC RostockMAX v4 0.5"
-	],
-	"compatible_prints_condition": "",
-	"filament_retraction_length": [
-		"6"
-	],
-	"filament_z_hop": [
-		"0.3"
-	],
-	"filament_retraction_speed": [
-		"40"
-	],
-	"filament_deretraction_speed": [
-		"30"
-	],
-	"setting_id": "85J1rc8KxOc7v2cF",
-	"filament_id": "SMCFG00105"
-}

resources/profiles/SeeMeCNC/filament/SeeMeCNC_PETG_0_7mm.json

@@ -1,65 +0,0 @@
-{
-	"type": "filament",
-	"name": "SeeMeCNC PETG 0.7 nozzle",
-	"inherits": "SeeMeCNC PETG",
-	"from": "System",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"SeeMeCNC PETG 0.7 nozzle"
-	],
-	"compatible_printers": [
-		"SeeMeCNC Artemis 0.7 nozzle",
-		"SeeMeCNC BOSSdelta 500 0505 0.7 nozzle",
-		"SeeMeCNC BOSSdelta 500 0510 0.7 nozzle",
-		"SeeMeCNC BOSSdelta 500 0521 0.7 nozzle",
-		"SeeMeCNC BOSSdelta 300 0.7 nozzle",
-		"SeeMeCNC RostockMAX v3.2 0.7 nozzle",
-		"SeeMeCNC RostockMAX v4 0.7 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [
-		"0.28mm Fine @SeeMeCNC Artemis 0.7",
-		"0.28mm Fine @SeeMeCNC BOSSdelta 300 0.7",
-		"0.28mm Fine @SeeMeCNC BOSSdelta 500 0505 0.7",
-		"0.28mm Fine @SeeMeCNC BOSSdelta 500 0510 0.7",
-		"0.28mm Fine @SeeMeCNC BOSSdelta 500 0521 0.7",
-		"0.28mm Fine @SeeMeCNC RostockMAX v3.2 0.7",
-		"0.28mm Fine @SeeMeCNC RostockMAX v4 0.7",
-		"0.35mm Standard @SeeMeCNC Artemis 0.7",
-		"0.35mm Standard @SeeMeCNC BOSSdelta 300 0.7",
-		"0.35mm Standard @SeeMeCNC BOSSdelta 500 0505 0.7",
-		"0.35mm Standard @SeeMeCNC BOSSdelta 500 0510 0.7",
-		"0.35mm Standard @SeeMeCNC BOSSdelta 500 0521 0.7",
-		"0.35mm Standard @SeeMeCNC RostockMAX v3.2 0.7",
-		"0.35mm Standard @SeeMeCNC RostockMAX v4 0.7",
-		"0.42mm Draft @SeeMeCNC Artemis 0.7",
-		"0.42mm Draft @SeeMeCNC BOSSdelta 300 0.7",
-		"0.42mm Draft @SeeMeCNC BOSSdelta 500 0505 0.7",
-		"0.42mm Draft @SeeMeCNC BOSSdelta 500 0510 0.7",
-		"0.42mm Draft @SeeMeCNC BOSSdelta 500 0521 0.7",
-		"0.42mm Draft @SeeMeCNC RostockMAX v3.2 0.7",
-		"0.42mm Draft @SeeMeCNC RostockMAX v4 0.7",
-		"0.49mm Extra Draft @SeeMeCNC Artemis 0.7",
-		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 300 0.7",
-		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 0.7",
-		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 0.7",
-		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 0.7",
-		"0.49mm Extra Draft @SeeMeCNC RostockMAX v3.2 0.7",
-		"0.49mm Extra Draft @SeeMeCNC RostockMAX v4 0.7"
-	],
-	"compatible_prints_condition": "",
-	"filament_retraction_length": [
-		"6"
-	],
-	"filament_z_hop": [
-		"0.4"
-	],
-	"filament_retraction_speed": [
-		"40"
-	],
-	"filament_deretraction_speed": [
-		"30"
-	],
-	"setting_id": "QI1p2Hi76cWlfRwC",
-	"filament_id": "SMCFG00107"
-}