fix: Allow plugins to read the embedded Python stdlib

* Let the bundled Python verify HTTPS certificates on macOS

* Restore SSL_CERT_FILE after the bundled Python override test

.claude/skills/orca-translations/SKILL.md

@@ -1,6 +1,6 @@
 ---
 name: orca-translations
-description: Use when updating, filling, reviewing or fixing OrcaSlicer translations in localization/i18n — running scripts/run_gettext --full, translating empty or new msgids in the .po catalogs, AI translation passes and their "# AI Translated" / "# Needs human review" comments, plural forms, msgctxt homonyms, and keeping catalogs consistent with the localization glossary (OrcaSlicer_WIKI localization_glossary.tsv), including adding new glossary terms. Also use for msgfmt or run_gettext failures, placeholder or line-break mismatches, and reviewing a translation PR against the glossary.
+description: Use when updating, filling, reviewing or fixing OrcaSlicer translations in localization/i18n — running scripts/run_gettext --full, translating empty or new msgids in the .po catalogs, AI translation passes and their "# AI Translated" / "# Needs human review" comments, plural forms, msgctxt homonyms, and keeping catalogs consistent with the localization glossary (OrcaSlicer_WIKI developer_reference/glossary), including adding new glossary terms. Also use for msgfmt or run_gettext failures, placeholder or line-break mismatches, and reviewing a translation PR against the glossary.
 ---
 
 # OrcaSlicer translations
@@ -9,7 +9,7 @@ The UI strings live in gettext catalogs: `localization/i18n/OrcaSlicer.pot` is t
 `localization/i18n/<lang>/OrcaSlicer_<lang>.po` holds each language. The `en` catalog is empty on
 purpose, so skip it. Recurring terms are fixed by the
 [localization glossary](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/developer_reference/localization_glossary.md),
-whose source is `developer_reference/localization_glossary.tsv` in the **OrcaSlicer_WIKI** repository.
+whose source is the per-language files in `developer_reference/glossary/` (`terms.tsv`, `languages.txt` and one `<lang>.tsv`) in the **OrcaSlicer_WIKI** repository.
 A translation pass therefore touches two repositories: the catalogs here, and the glossary there.
 
 All catalog editing goes through [`scripts/po_tool.py`](scripts/po_tool.py) (standard library only).
@@ -153,7 +153,7 @@ Report:
 - anything left empty, and why;
 - the glossary rows added or filled.
 
-The catalogs (and `OrcaSlicer.pot`) and the glossary (`localization_glossary.tsv` and `.md`) are
+The catalogs (and `OrcaSlicer.pot`) and the glossary (`developer_reference/glossary/*.tsv` and `localization_glossary.md`) are
 separate changes in separate repositories. The wiki change should land with, or before, the catalog
 change. Commit or open PRs only when asked.
 
@@ -210,7 +210,7 @@ with the translators, followed by the catalogs.
 When this skill and the checkouts disagree, the checkouts win:
 - `scripts/run_gettext.sh` / `.bat` for extraction and merging;
 - `localization/i18n/list.txt` for the scanned sources;
-- the wiki's `localization_guide.md` and `localization_glossary.md` / `.tsv` for the rules and terms;
+- the wiki's `localization_guide.md` and `localization_glossary.md` and `glossary/*.tsv` for the rules and terms;
 - `AGENTS.md` (Localization & translations) for the repository's conventions.
 
 ## Editing this skill

.claude/skills/orca-translations/scripts/po_tool.py

@@ -28,13 +28,14 @@ import sys
 import tempfile
 import time
 import unicodedata
+import urllib.error
 import urllib.request
 from pathlib import Path
 
 REPO = Path(__file__).resolve().parents[4]
 I18N = REPO / "localization" / "i18n"
 SKIP_LANGS = {"en"}  # the English catalog is intentionally empty
-GLOSSARY_TSV = Path("developer_reference") / "localization_glossary.tsv"
+GLOSSARY_DIR = Path("developer_reference") / "glossary"  # terms.tsv, languages.txt and one <lang>.tsv per language
 GLOSSARY_MD = Path("developer_reference") / "localization_glossary.md"
 MISSING = {"", "—"}
 RAW_URL = "https://raw.githubusercontent.com/OrcaSlicer/OrcaSlicer_WIKI/main/"
@@ -252,30 +253,40 @@ def all_langs():
 
 def find_wiki(arg):
     for cand in [arg, os.environ.get("ORCA_WIKI_DIR"), REPO.parent / "OrcaSlicer_WIKI", REPO.parent / "OrcaSlicer.wiki"]:
-        if cand and (Path(cand) / GLOSSARY_TSV).exists():
+        if cand and (Path(cand) / GLOSSARY_DIR / "terms.tsv").exists():
             return Path(cand)
     return None
 
 
-def _download(rel):
-    cache = Path(tempfile.gettempdir()) / ("orca_glossary_" + rel.name)
+def _download(rel, required=True):
+    cache = Path(tempfile.gettempdir()) / "orca_glossary" / rel
     if not cache.exists() or time.time() - cache.stat().st_mtime > 3600:
-        with urllib.request.urlopen(RAW_URL + rel.as_posix(), timeout=30) as r:
-            cache.write_bytes(r.read())
+        try:
+            with urllib.request.urlopen(RAW_URL + rel.as_posix(), timeout=30) as r:
+                data = r.read()
+        except urllib.error.HTTPError:
+            if required:
+                raise
+            return None
+        cache.parent.mkdir(parents=True, exist_ok=True)
+        cache.write_bytes(data)
     return cache
 
 
 class Glossary:
-    def __init__(self, wiki_arg=None, quiet=False):
+    """The glossary: rows of [English, Description, <one translation per language loaded>]."""
+
+    def __init__(self, wiki_arg=None, quiet=False, langs=None):
         self.wiki = find_wiki(wiki_arg)
+        self.langs = langs  # only these languages' files are read (and downloaded); None means all
         if self.wiki:
-            self.tsv, self.md = self.wiki / GLOSSARY_TSV, self.wiki / GLOSSARY_MD
+            self.dir, self.md = self.wiki / GLOSSARY_DIR, self.wiki / GLOSSARY_MD
             if not quiet:
                 self.report_clone_state()
         else:
             if not quiet:
                 print("note: no OrcaSlicer_WIKI clone found; using the published glossary read-only", file=sys.stderr)
-            self.tsv, self.md = _download(GLOSSARY_TSV), _download(GLOSSARY_MD)
+            self.dir, self.md = _download(GLOSSARY_DIR / "terms.tsv").parent, _download(GLOSSARY_MD)
         self.load()
 
     def report_clone_state(self):
@@ -290,11 +301,23 @@ class Glossary:
         if behind and behind != "0":
             print(f"note: the wiki clone is {behind} commits behind origin/main (as of its last fetch)", file=sys.stderr)
 
+    def _read(self, name, required=True):
+        path = self.dir / name if self.wiki else _download(GLOSSARY_DIR / name, required)
+        return path.read_text(encoding="utf-8-sig").splitlines() if path and path.exists() else None
+
     def load(self):
-        rows = [l.split("\t") for l in self.tsv.read_text(encoding="utf-8-sig").splitlines() if l.strip()]
-        self.header = rows[0]
-        # "—" marks a language with no established rendering yet
-        self.rows = [[c if c.strip() not in MISSING else "" for c in r] + [""] * (len(rows[0]) - len(r)) for r in rows[1:]]
+        terms = [l.split("	") for l in self._read("terms.tsv")[1:] if l.strip()]
+        langs = [l.strip() for l in self._read("languages.txt") if l.strip()]
+        langs = [l for l in langs if self.langs is None or l in self.langs]
+        self.header = ["English", "Description"] + langs
+        self.rows = [[r[0], r[1] if len(r) > 1 else ""] + [""] * len(langs) for r in terms]
+        index = {r[0]: r for r in self.rows}
+        for col, lang in enumerate(langs, start=2):
+            for line in (self._read(f"{lang}.tsv", required=False) or [])[1:]:
+                cells = line.split("	")
+                # "—" marks a language with no established rendering yet
+                if len(cells) > 2 and cells[0] in index and cells[2].strip() not in MISSING:
+                    index[cells[0]][col] = cells[2].strip()
         self.matchers = []
         for row in self.rows:
             base = re.sub(r"\s*\([^)]*\)\s*$", "", row[0]).strip()
@@ -494,7 +517,7 @@ def similar_entries(c, e, pool, cutoff=0.72):
 
 def cmd_pending(a):
     c = Catalog(catalog_path(a.lang))
-    g = Glossary(a.wiki)
+    g = Glossary(a.wiki, langs=[a.lang])
     todo = [e for e in c.active() if needs_translation(e, c.nplurals, a.include_fuzzy)]
     batch = todo[a.offset:a.offset + a.limit] if a.limit else todo[a.offset:]
     pool = [(x.msgid, x.msgstrs()[0], x.obsolete) for x in c.entries
@@ -533,7 +556,7 @@ def cmd_pending(a):
 
 def cmd_apply(a):
     c = Catalog(catalog_path(a.lang))
-    g = None if a.no_glossary else Glossary(a.wiki, quiet=True)
+    g = None if a.no_glossary else Glossary(a.wiki, quiet=True, langs=[a.lang])
     data = json.loads(Path(a.input).read_text(encoding="utf-8"))
     items = data["entries"] if isinstance(data, dict) else data
     idx = c.index()
@@ -588,7 +611,7 @@ def find_msgfmt():
 
 
 def cmd_check(a):
-    g = None if a.no_glossary else Glossary(a.wiki, quiet=True)
+    g = None if a.no_glossary else Glossary(a.wiki, quiet=True, langs=a.lang or None)
     msgfmt = find_msgfmt()
     status = 0
     for lang in a.lang or all_langs():
@@ -646,7 +669,7 @@ def cmd_lookup(a):
 
 
 def cmd_glossary(a):
-    g = Glossary(a.wiki)
+    g = Glossary(a.wiki, langs=[a.lang])
     col = g.column(a.lang)
     if col is None:
         print(f"'{a.lang}' has no glossary column yet; add one with glossary-set --set {a.lang}=...")
@@ -733,6 +756,17 @@ def cmd_candidates(a):
         print(f"{cnt:7} {langs:6}  {text}{'  [label]' if k in labels else ''}  e.g. {ex[:70]}{'…' if len(ex) > 70 else ''}")
 
 
+def _edit_tsv(path, edit):
+    """Apply edit(lines) to a glossary TSV, keeping its BOM and line endings."""
+    data = path.read_bytes()
+    bom = data.startswith(b"\xef\xbb\xbf")
+    text = data.decode("utf-8-sig")
+    nl = "\r\n" if "\r\n" in text else "\n"
+    lines = text.splitlines()
+    edit(lines)
+    path.write_bytes((b"\xef\xbb\xbf" if bom else b"") + (nl.join(lines) + nl).encode("utf-8"))
+
+
 def cmd_glossary_set(a):
     wiki = find_wiki(a.wiki)
     if not wiki:
@@ -741,8 +775,21 @@ def cmd_glossary_set(a):
               f"  {a.term}: " + ", ".join(a.set) + "\n"
               "Clone https://github.com/OrcaSlicer/OrcaSlicer_WIKI next to this repository, or pass --wiki.", file=sys.stderr)
         return 2
-    tsv = wiki / GLOSSARY_TSV
-    lock = tsv.with_suffix(".lock")
+    gdir = wiki / GLOSSARY_DIR
+    gen = wiki / "generate_glossary.py"
+    if not gen.exists():
+        sys.exit(f"{gen} not found")
+    run_gen = lambda *args: subprocess.run([sys.executable, str(gen), *args], cwd=wiki, capture_output=True, text=True)
+    langs = [l.strip() for l in (gdir / "languages.txt").read_text(encoding="utf-8-sig").splitlines() if l.strip()]
+    values = {}
+    for s in a.set:
+        lang, _, val = s.partition("=")
+        if lang not in langs:
+            sys.exit(f"no glossary language '{lang}' (add it to {GLOSSARY_DIR.as_posix()}/languages.txt)")
+        if "\t" in val or "\n" in val:
+            sys.exit("values cannot contain tabs or line breaks")
+        values[lang] = val.strip()
+    lock = gdir / ".lock"
     for _ in range(100):
         try:
             fd = os.open(lock, os.O_CREAT | os.O_EXCL)
@@ -752,50 +799,51 @@ def cmd_glossary_set(a):
     else:
         sys.exit(f"could not lock {lock}; remove it if no other run is active")
     try:
-        data = tsv.read_bytes()
-        bom = data.startswith(b"\xef\xbb\xbf")
-        text = data.decode("utf-8-sig")
-        nl = "\r\n" if "\r\n" in text else "\n"
-        lines = text.splitlines()
-        header = lines[0].split("\t")
-        values = {}
-        for s in a.set:
-            lang, _, val = s.partition("=")
-            if lang not in header:
-                sys.exit(f"no glossary column '{lang}'")
-            if "\t" in val or "\n" in val:
-                sys.exit("values cannot contain tabs or line breaks")
-            values[header.index(lang)] = val.strip()
-        row_i = next((i for i, l in enumerate(lines[1:], 1) if l.split("\t")[0] == a.term), None)
-        new = row_i is None
-        if new:
-            if not a.description:
-                sys.exit("a new term needs --description (one sentence saying what it is)")
-            row = [a.term, a.description] + [""] * (len(header) - 2)
-            lines.append("")
-            row_i = len(lines) - 1
-        else:
-            row = lines[row_i].split("\t")
-            row += [""] * (len(header) - len(row))
-            if a.description:
-                row[1] = a.description
-        conflicts = [f"{header[i]}: '{row[i]}' -> '{v}'" for i, v in values.items() if row[i].strip() not in MISSING and row[i] != v]
+        terms = (gdir / "terms.tsv").read_text(encoding="utf-8-sig").splitlines()
+        new = not any(l.split("\t")[0] == a.term for l in terms[1:])
+        if new and not a.description:
+            sys.exit("a new term needs --description (one sentence saying what it is)")
+        # an established translation is only replaced on request
+        conflicts = []
+        for lang, v in values.items():
+            for line in (gdir / f"{lang}.tsv").read_text(encoding="utf-8-sig").splitlines()[1:]:
+                cells = line.split("\t")
+                if cells[0] == a.term and len(cells) > 2 and cells[2].strip() not in MISSING and cells[2] != v:
+                    conflicts.append(f"{lang}: '{cells[2]}' -> '{v}'")
         if conflicts and not a.replace:
             sys.exit("established translations differ (pass --replace, and update the catalogs to match):\n  " + "\n  ".join(conflicts))
-        for i, v in values.items():
-            row[i] = v
-        lines[row_i] = "\t".join(row)
-        tsv.write_bytes((b"\xef\xbb\xbf" if bom else b"") + (nl.join(lines) + nl).encode("utf-8"))
+
+        def edit_terms(lines):
+            for i, l in enumerate(lines):
+                if i and l.split("\t")[0] == a.term:
+                    if a.description:
+                        lines[i] = f"{a.term}\t{a.description}"
+                    return
+            lines.append(f"{a.term}\t{a.description}")
+        if new or a.description:
+            _edit_tsv(gdir / "terms.tsv", edit_terms)
+            r = run_gen("--sync")  # copies the term and description into every language file
+            if r.returncode:
+                sys.exit((r.stdout + r.stderr).strip())
+
+        def setter(lang, v):
+            def edit(lines):
+                for i, l in enumerate(lines):
+                    cells = l.split("\t")
+                    if i and cells[0] == a.term:
+                        lines[i] = "\t".join(cells[:2] + [v])
+                        return
+                sys.exit(f"{lang}.tsv has no row for '{a.term}'")
+            return edit
+        for lang, v in values.items():
+            _edit_tsv(gdir / f"{lang}.tsv", setter(lang, v))
     finally:
         os.close(fd)
         os.unlink(lock)
     print(f"glossary: {'added' if new else 'updated'} '{a.term}'")
-    gen = wiki / "generate_glossary.py"
-    if gen.exists():
-        r = subprocess.run([sys.executable, str(gen), "--update"], cwd=wiki, capture_output=True, text=True)
-        print((r.stdout + r.stderr).strip())
-        return r.returncode
-    return 0
+    r = run_gen("--update")
+    print((r.stdout + r.stderr).strip())
+    return r.returncode
 
 
 def main():

.claude/skills/orca-wxwidgets/references/platforms.md

@@ -569,12 +569,19 @@ on the **first** call. So:
 #endif
 ```
 
-**Before GTK starts**, only the environment exists. `CLI::run` (`src/OrcaSlicer.cpp`) branches on
-`GDK_BACKEND` (an `x11` prefix means the X11 opt-in). On the default path it forces `GDK_BACKEND=x11`
-when wx lacks EGL and `WAYLAND_DISPLAY` is set. It sets `WEBKIT_DISABLE_COMPOSITING_MODE=1`
-(non-replacing) only when both `DISPLAY` and `WAYLAND_DISPLAY` are set, and calls `XInitThreads()`
+**Before GTK starts**, only the environment exists. `CLI::run` (`src/OrcaSlicer.cpp`) sets the NVIDIA
+DMABUF workaround and then branches on `GDK_BACKEND` (an `x11` prefix means the X11 opt-in). On both
+paths, when `/proc/driver/nvidia/version` exists and the linked WebKitGTK honours the switch (>= 2.44,
+`WebView::SupportsForceSharedMemory()`), it sets `WEBKIT_DMABUF_RENDERER_FORCE_SHM=1` and
+`WEBKIT_FORCE_DMABUF_RENDERER=1` (non-replacing): the proprietary driver cannot back WebKit's hardware
+DMABUF renderer. On a hypervisor guest (`/proc/cpuinfo` `hypervisor` flag) and WebKitGTK >= 2.44 it sets
+`WEBKIT_DMABUF_RENDERER_FORCE_SHM=1` alone, since virtual GPUs cannot back the hardware path either. On the default path it forces `GDK_BACKEND=x11` when wx lacks EGL and `WAYLAND_DISPLAY`
+is set, and sets `WEBKIT_DISABLE_COMPOSITING_MODE=1` (non-replacing) inside that branch when the linked
+WebKitGTK is older than 2.42: a forced X11 backend in a Wayland session is the only default-path case
+that runs through XWayland, which `DISPLAY` and `WAYLAND_DISPLAY` alone do not tell you (a native
+Wayland app inherits both). It calls `XInitThreads()`
 only when `DISPLAY` is set. With neither variable set, the GUI refuses to start ("Neither DISPLAY nor
-WAYLAND_DISPLAY set"). The details and the WebKit rule (c12912e0df) are in
+WAYLAND_DISPLAY set"). The details and the WebKit rules (c12912e0df) are in
 `references/webview-gl-aui-media.md` §WebKitGTK on Linux sessions.
 
 **wx's own detectors**, for reference:

.claude/skills/orca-wxwidgets/references/webview-gl-aui-media.md

@@ -61,7 +61,8 @@ available; GTK2/WebKit1 is an opt-out configuration the GUI does not support.
 11. A web host that re-themes in place handles `EVT_WEBVIEW_RECREATED` without `Skip()`; one that
     needs a reload lets it through. §[Orca wrapper](#orca-webview-wrapper-widgetswebview)
 12. Keep `WebViewWebKit`'s destructor removing the `"wx"` handler. §[Orca wrapper](#orca-webview-wrapper-widgetswebview)
-13. Do not widen `WEBKIT_DISABLE_COMPOSITING_MODE` beyond Orca's default-path XWayland case, and never
+13. Do not widen `WEBKIT_DISABLE_COMPOSITING_MODE` beyond the no-EGL default path where Orca forces
+    `GDK_BACKEND=x11`, for WebKitGTK older than 2.42, and never
     make a page's progress depend only on a C++→JS callback. §[WebKitGTK on Linux](#webkitgtk-on-linux-sessions)
 14. GL attribute lists: legacy `int[]` lists end with `0` and spell out `WX_GL_RGBA` and
     `WX_GL_DOUBLEBUFFER`; `wxGLAttributes`/`wxGLContextAttrs` end with `EndList()`; MSAA is requested
@@ -567,33 +568,74 @@ vue-resize workaround script and sets a persistent SQLite cookie store on the vi
 ## WebKitGTK on Linux sessions
 
 **Mechanism.** `CLI::run` (`src/OrcaSlicer.cpp`, under `#ifdef __WXGTK__`, before GTK initialises)
-branches on `GDK_BACKEND`:
+sets the DMABUF workarounds and then branches on `GDK_BACKEND`:
+- **Both paths**, before the split: when `/proc/driver/nvidia/version` exists and the linked WebKitGTK
+  honours the switch (>= 2.44, `WebView::SupportsForceSharedMemory()`), it sets
+  `WEBKIT_DMABUF_RENDERER_FORCE_SHM=1` and `WEBKIT_FORCE_DMABUF_RENDERER=1` non-replacing. The
+  proprietary driver cannot back WebKit's hardware DMABUF renderer, so the shared-memory transport keeps
+  accelerated compositing instead of dropping it; `WEBKIT_FORCE_DMABUF_RENDERER` clears the
+  Debian/Ubuntu/openSUSE `isNVIDIA()` early return, which otherwise returns before the FORCE_SHM check.
+- **Hypervisor guests**, same position: when `is_hypervisor_guest()` (the `hypervisor` flag in
+  `/proc/cpuinfo`) and WebKitGTK >= 2.44, it sets `WEBKIT_DMABUF_RENDERER_FORCE_SHM=1` non-replacing.
+  Virtual GPUs (VirtualBox VMSVGA, VMware, QEMU) cannot back the hardware DMABUF path either, and
+  FORCE_SHM alone was confirmed to fix web views in VirtualBox; the `WEBKIT_FORCE_DMABUF_RENDERER` pair
+  is not needed without the Debian `isNVIDIA()` patch. The flag is x86-only, so ARM guests are not covered.
 - **Default path** (`GDK_BACKEND` unset or not starting with `x11`): if wx lacks EGL (`!wxHAS_EGL`) and
-  `WAYLAND_DISPLAY` is set, it forces `GDK_BACKEND=x11`; it sets `WEBKIT_DISABLE_COMPOSITING_MODE=1`
-  non-replacing **only** when both `DISPLAY` and `WAYLAND_DISPLAY` are non-empty (a Wayland session with
-  XWayland available — the session, not the backend GTK will pick); `XInitThreads()` runs only when
-  `DISPLAY` is set.
+  `WAYLAND_DISPLAY` is set, it forces `GDK_BACKEND=x11`, and in that same branch it sets
+  `WEBKIT_DISABLE_COMPOSITING_MODE=1` non-replacing when the linked WebKitGTK predates 2.42
+  (`WebView::NeedsCompositingWorkaround()`). That forced X11 backend in a Wayland session is the only
+  default-path case that really runs through XWayland; `DISPLAY` and `WAYLAND_DISPLAY` alone do not
+  identify it, because a native Wayland app inherits both. `XInitThreads()` runs only when `DISPLAY` is
+  set.
 - **`GDK_BACKEND=x11…` opt-in path**: sets `DRI_PRIME=1` (and the NVIDIA PRIME variables when
   `/proc/driver/nvidia/version` exists), calls `XInitThreads()`, and deliberately does **not** disable
-  compositing (the comment: the WebKit2GTK XWayland bug appears fixed in WebKit2GTK ≥ 2.42, and leaving
-  compositing on keeps hardware acceleration for Device / Setup Wizard / login pages).
+  compositing, which keeps hardware acceleration for Device / Setup Wizard / login pages.
 
 Runtime backend detection elsewhere uses Orca's `is_running_on_wayland()` / `is_running_on_x11()`
 (see `references/platforms.md`), not these environment variables.
 
 **Pitfall.**
-- **Rule:** Set `WEBKIT_DISABLE_COMPOSITING_MODE` only on the default path in Wayland sessions,
-  non-replacing (`setenv(..., false)`, so a value the user already exported wins), before GTK
-  initialises; never unconditionally. Keep JS-side fallbacks so a page never
+- **Rule:** On NVIDIA and hypervisor guests reach for `WEBKIT_DMABUF_RENDERER_FORCE_SHM` before
+  `WEBKIT_DISABLE_COMPOSITING_MODE`. **Why:** the proprietary driver and virtual GPUs cannot back WebKit's
+  hardware DMABUF renderer, leaving web views blank or slow; FORCE_SHM keeps accelerated compositing and only
+  skips the hardware path, while disabling compositing drops it. Threaded scrolling is a separate,
+  release-dependent default (off in 2.44/2.45, on from 2.46). `WEBKIT_DISABLE_DMABUF_RENDERER` is not a
+  substitute — it is read first, leaves the transport set empty (no compositing from 2.44 on, where the
+  X11/Wayland fallback renderers were removed) and has a reported crash path. On Debian/Ubuntu and
+  openSUSE the `isNVIDIA()` patch returns before the FORCE_SHM check, so `WEBKIT_FORCE_DMABUF_RENDERER=1`
+  must clear it first; that variable exists only in those patches. WebKit reads all of these once per
+  process, before the first WebView.
+  The test is `/proc/driver/nvidia/version`, so a hybrid laptop that renders on its iGPU also takes the
+  shared-memory path, which is a per-frame GPU readback rather than zero-copy; exporting
+  `WEBKIT_DMABUF_RENDERER_FORCE_SHM=0` in the environment restores the hardware path.
+  ```cpp
+  // Wrong: kills compositing and threaded scrolling (and can crash on modern WebKit)
+  ::setenv("WEBKIT_DISABLE_DMABUF_RENDERER", "1", false);
+  // Right: keep compositing, skip only the hardware DMABUF path
+  if (::access("/proc/driver/nvidia/version", F_OK) == 0 && WebView::SupportsForceSharedMemory()) {
+      ::setenv("WEBKIT_DMABUF_RENDERER_FORCE_SHM", "1", /*replace*/ false);
+      ::setenv("WEBKIT_FORCE_DMABUF_RENDERER", "1", /*replace*/ false);
+  }
+  ```
+  Cite: WebKit 2.52.6 `Source/WebKit/UIProcess/gtk/AcceleratedBackingStore.cpp`
+  (`rendererBufferTransportMode()`), Debian `disable-nvidia-dmabuf.patch`, WebKit bug 262607.
+- **Rule:** Set `WEBKIT_DISABLE_COMPOSITING_MODE` only on the default path, in the branch where wx
+  lacks EGL and Orca forces `GDK_BACKEND=x11`, non-replacing (`setenv(..., false)`, so a value the user
+  already exported wins), before GTK
+  initialises; never unconditionally, and only for the WebKitGTK releases that need it (older than
+  2.42, `WebView::NeedsCompositingWorkaround()`). Keep JS-side fallbacks so a page never
   waits forever for a C++→JS call.
-  **Why:** WebKit2GTK accelerated compositing could fail silently under XWayland, leaving web views
-  blank (Setup Wizard stuck on "Loading..."); disabling it everywhere needlessly drops hardware
-  acceleration; without the JS timeout the user is stuck when the signal is lost.
+  **Why:** WebKit2GTK accelerated compositing could fail silently under XWayland before 2.42, leaving
+  web views blank (Setup Wizard stuck on "Loading..."); the variable also turns off threaded scrolling,
+  so applying it on a newer WebKit needlessly drops both GPU compositing and async scrolling (the
+  Device tab loses its smoothness); without the JS timeout the user is stuck when the signal is lost.
   ```cpp
   // Wrong: unconditional, kills HW acceleration everywhere
   ::setenv("WEBKIT_DISABLE_COMPOSITING_MODE", "1", false);
-  // Right (default path only): non-replacing, before GTK init, Wayland session with XWayland
-  if (display && *display && wayland && *wayland)
+  // Right (default path only): non-replacing, before GTK init, WebKitGTK < 2.42,
+  // and only in the branch that forces GDK_BACKEND=x11 (wx without EGL), the
+  // case that runs through XWayland
+  if (WebView::NeedsCompositingWorkaround() && wayland && *wayland)
       ::setenv("WEBKIT_DISABLE_COMPOSITING_MODE", "1", /*replace*/ false);
   ```
   Cite: c12912e0df (`src/OrcaSlicer.cpp`; `resources/web/guide/0/load.js` `OnInit`

.github/workflows/check_profiles.yml

@@ -232,6 +232,31 @@ jobs:
           mkdir -p ${{ runner.temp }}/profile-check-results
           echo "${{ github.event.pull_request.number }}" > ${{ runner.temp }}/profile-check-results/pr_number.txt
 
+      # Builds a readable diff of the custom G-code the PR changes, which GitHub shows as
+      # one long line per setting, for check_profiles_comment.yml to post.
+      - name: Diff custom G-code
+        if: ${{ always() && github.event_name == 'pull_request' }}
+        continue-on-error: true
+        env:
+          PR_HEAD_SHA: ${{ github.event.pull_request.head.sha }}
+        run: |
+          git fetch --no-tags --depth=2 origin "$(git rev-parse HEAD)"
+          results=${{ runner.temp }}/profile-check-results
+          diff=${{ runner.temp }}/gcode_diff.md
+          # HEAD is the PR's merge commit, so HEAD^1 is the base it merges onto.
+          python3 ./scripts/orca_profile_tool.py gcode-diff --base HEAD^1 --head HEAD > "$diff"
+          if [ -s "$diff" ]; then
+            {
+              echo "<!-- profile-gcode-diff-comment -->"
+              cat "$diff"
+              echo ""
+              # The comment workflow finds this line as the only one starting with <sub>.
+              echo "<sub>For commit ${PR_HEAD_SHA} of this PR.</sub>"
+            } > "$results/gcode_diff.md"
+          fi
+          # Tells the comment workflow that a missing gcode_diff.md means no G-code changed.
+          touch "$results/gcode_diff_done.txt"
+
       - name: Prepare comment artifact
         if: ${{ always() && github.event_name == 'pull_request' && (steps.profile_tool.outcome == 'failure' || steps.legacy_compat.outcome == 'failure' || steps.validate_system.outcome == 'failure' || steps.validate_slice.outcome == 'failure' || steps.validate_filament_subtypes.outcome == 'failure' || steps.validate_custom.outcome == 'failure') }}
         run: |

.github/workflows/check_profiles_comment.yml

@@ -38,6 +38,7 @@ jobs:
         env:
           GH_TOKEN: ${{ github.token }}
           GH_REPO: ${{ github.repository }}
+          HEAD_SHA: ${{ github.event.workflow_run.head_sha }}
         run: |
           if [ ! -f pr_number.txt ]; then
             echo "No pr_number.txt in artifact, skipping."
@@ -49,18 +50,72 @@ jobs:
             echo "Invalid PR number: $PR_NUMBER"
             exit 1
           fi
+          # PR code wrote the artifact, so only a run for the named PR's current head may post.
+          if [ -z "$HEAD_SHA" ]; then
+            echo "The triggering run names no head commit."
+            exit 1
+          fi
+          if ! PR_HEAD=$(gh api "repos/${GH_REPO}/pulls/${PR_NUMBER}" --jq .head.sha); then
+            echo "Cannot look up PR #${PR_NUMBER}."
+            exit 1
+          fi
+          if [ "$HEAD_SHA" != "$PR_HEAD" ]; then
+            echo "${HEAD_SHA} is not the head of PR #${PR_NUMBER}; skipping."
+            exit 0
+          fi
+
+          # Lists every bot comment on the PR, one JSON object per line.
+          COMMENTS=$(gh api --paginate "repos/${GH_REPO}/issues/${PR_NUMBER}/comments" \
+            --jq '.[] | select(.user.login == "github-actions[bot]") | {id, body} | @json')
 
           # Delete prior comments matching the marker (from check_profiles.yml) or the legacy heading.
-          OLD_IDS=$(gh api --paginate "repos/${GH_REPO}/issues/${PR_NUMBER}/comments" \
-            --jq '.[] | select(.user.login == "github-actions[bot]") | select((.body | startswith("<!-- profile-validation-comment -->")) or (.body | startswith("## :x: Profile Validation Errors"))) | .id')
+          OLD_IDS=$(printf '%s\n' "$COMMENTS" | jq -r 'select((.body | startswith("<!-- profile-validation-comment -->")) or (.body | startswith("## :x: Profile Validation Errors"))) | .id')
           for comment_id in $OLD_IDS; do
             echo "Deleting outdated profile-validation comment ${comment_id}"
             gh api -X DELETE "repos/${GH_REPO}/issues/comments/${comment_id}" || true
           done
 
           # Post a new comment only when validation failed (pr_comment.md present).
+          # A failed post fails the job only after the G-code diff is handled.
+          failed=0
           if [ -f pr_comment.md ]; then
-            gh pr comment "$PR_NUMBER" --body-file pr_comment.md
+            gh pr comment "$PR_NUMBER" --body-file pr_comment.md || failed=1
           else
             echo "Validation succeeded; cleaned up prior comments without posting."
           fi
+
+          # Makes the G-code diff comment match gcode_diff.md, or deletes it if there is none.
+          update_gcode_diff_comment() {
+            if [ ! -f gcode_diff_done.txt ]; then
+              echo "The G-code diff step did not finish; leaving any G-code diff comment as it is."
+              return 0
+            fi
+            GCODE_IDS=$(printf '%s\n' "$COMMENTS" | jq -r 'select(.body | startswith("<!-- profile-gcode-diff-comment -->")) | .id')
+            if [ -f gcode_diff.md ] && [ "$(wc -c < gcode_diff.md)" -gt 65536 ]; then
+              echo "gcode_diff.md is over GitHub's comment limit; not posting it."
+              rm gcode_diff.md
+            fi
+            if [ -f gcode_diff.md ] && [ "$(echo "$GCODE_IDS" | wc -w)" -eq 1 ]; then
+              OLD_BODY=$(printf '%s\n' "$COMMENTS" | jq -r --argjson id "$GCODE_IDS" 'select(.id == $id) | .body' | tr -d '\r')
+              NEW_BODY=$(tr -d '\r' < gcode_diff.md)
+              if [ "$OLD_BODY" = "$NEW_BODY" ]; then
+                echo "G-code diff unchanged; keeping comment ${GCODE_IDS}."
+                return 0
+              fi
+              # Edits in place when only the <sub> line differs, since edits notify nobody.
+              if [ "$(grep -v '^<sub>' <<< "$OLD_BODY")" = "$(grep -v '^<sub>' <<< "$NEW_BODY")" ]; then
+                echo "G-code diff unchanged at a new commit; updating comment ${GCODE_IDS}."
+                gh api -X PATCH "repos/${GH_REPO}/issues/comments/${GCODE_IDS}" -F body=@gcode_diff.md > /dev/null
+                return 0
+              fi
+            fi
+            for comment_id in $GCODE_IDS; do
+              echo "Deleting outdated G-code diff comment ${comment_id}"
+              gh api -X DELETE "repos/${GH_REPO}/issues/comments/${comment_id}" || true
+            done
+            if [ -f gcode_diff.md ]; then
+              gh pr comment "$PR_NUMBER" --body-file gcode_diff.md
+            fi
+          }
+          update_gcode_diff_comment
+          exit "$failed"

AGENTS.md

@@ -91,7 +91,7 @@ See `.claude/skills/orca-translations/references/source-audit.md` for the full c
 ### Terminology
 
 - Use the [Localization glossary](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/developer_reference/localization_glossary.md) as the source of truth for recurring terms, so the same English term is always rendered the same way within a language, and terms that must stay in English (brand/product names, acronyms, materials, file formats, G-code tokens, macros/variables/identifiers) are not translated.
-- If a term's established translation changes, update both the affected `.po` files and the glossary (`localization_glossary.tsv`, then regenerate) so they stay in sync.
+- If a term's established translation changes, update both the affected `.po` files and the glossary (`developer_reference/glossary/<lang>.tsv` in the wiki, then regenerate) so they stay in sync.
 - Translate the *meaning*, not the words. Check what the string actually controls before translating it — English reuses one word for different things. `Flow ratio` (multiplier), `Flow Rate` (throughput) and `Flow Dynamics` (pressure compensation) are three different terms; `extruder` may mean the toolhead, the feeder motor, or the nozzle depending on the string.
 - Reuse one template per recurring message shape (`Failed to connect to …`, `Are you sure you want to …?`), even where the English wording varies.
 

CMakeLists.txt

@@ -288,6 +288,19 @@ if (APPLE)
     # Type"); Ninja/-Wall does not, and under -Werror it fails Xcode builds on code CI accepts.
     set(CMAKE_XCODE_ATTRIBUTE_GCC_WARN_64_TO_32_BIT_CONVERSION "NO")
 
+    # The Xcode generator ignores CMAKE_<LANG>_COMPILER_LAUNCHER, so hand the launcher to
+    # Xcode's own Compiler Launcher setting, which wraps every clang compile (C, C++,
+    # Objective-C++ and the precompiled header) with one program: the C++ launcher wins when
+    # both are set. The setting takes a single program path, not a CMake launcher list.
+    # Xcode versions without it ignore it and build uncached.
+    if (CMAKE_GENERATOR STREQUAL "Xcode")
+        if (CMAKE_CXX_COMPILER_LAUNCHER)
+            set(CMAKE_XCODE_ATTRIBUTE_C_COMPILER_LAUNCHER "${CMAKE_CXX_COMPILER_LAUNCHER}")
+        elseif (CMAKE_C_COMPILER_LAUNCHER)
+            set(CMAKE_XCODE_ATTRIBUTE_C_COMPILER_LAUNCHER "${CMAKE_C_COMPILER_LAUNCHER}")
+        endif ()
+    endif ()
+
     message(STATUS "Orca: IS_CROSS_COMPILE: ${IS_CROSS_COMPILE}")
 elseif (CMAKE_SYSTEM_NAME STREQUAL "Linux")
     set(CMAKE_INSTALL_RPATH "$ORIGIN")

build_linux.sh

@@ -22,7 +22,7 @@ function usage() {
     echo "   -g: run the requested build steps inside a Docker/Podman Ubuntu 24.04 container similar to the GitHub Actions Linux runner"
     echo "   -h: prints this help text"
     echo "   -i: build the Orca Slicer AppImage (optional)"
-    echo "   -p: boost ccache hit rate by disabling precompiled headers (default: ON)"
+    echo "   -p: disable precompiled headers (on by default): more ccache hits after header changes, slower misses"
     echo "   -r: skip RAM and disk checks (low RAM compiling)"
     echo "   -s: build the Orca Slicer (optional)"
     echo "   -t: build tests (optional), requires -s flag"
@@ -549,6 +549,20 @@ fi
 if [ -n "${CMAKE_CCACHE}" ] ; then
     echo "${CMAKE_CCACHE} found, enabling compiler caching..."
     export CMAKE_CCACHE_ARGS=(-DCMAKE_C_COMPILER_LAUNCHER="${CMAKE_CCACHE}" -DCMAKE_CXX_COMPILER_LAUNCHER="${CMAKE_CCACHE}")
+    # The same ccache settings as the CI build. Without this sloppiness ccache refuses every
+    # compile that uses the precompiled header, which is most of OrcaSlicer, and skips headers
+    # a checkout has just written. It is added to the sloppiness already configured, and
+    # CCACHE_SLOPPINESS or CCACHE_(NO)DEPEND set in the environment win.
+    if [[ "$(basename "${CMAKE_CCACHE}")" == ccache ]] ; then
+        if [[ -z "${CCACHE_SLOPPINESS+x}" ]] ; then
+            CCACHE_SLOPPINESS=$("${CMAKE_CCACHE}" --get-config sloppiness 2>/dev/null || true)
+            export CCACHE_SLOPPINESS="${CCACHE_SLOPPINESS:+${CCACHE_SLOPPINESS},}pch_defines,time_macros,include_file_mtime,include_file_ctime"
+        fi
+        # Hash the includes the compiler reports instead of preprocessing every miss.
+        if [[ -z "${CCACHE_DEPEND+x}${CCACHE_NODEPEND+x}" ]] ; then
+            export CCACHE_DEPEND=1
+        fi
+    fi
 else
     echo "Note: ccache or sccache are not found. Install either of them for faster rebuilds."
 fi

build_release_macos.sh

@@ -111,6 +111,54 @@ else
   export CMAKE_POLICY_COMPAT=""
 fi
 
+# Compiler cache, as in build_linux.sh. The program comes from CMAKE_CCACHE, else from a
+# launcher already set in the environment (the CI build sets ccache there), else sccache or
+# ccache from PATH; one program serves both languages. Each run applies its own choice to the
+# build directories, replacing a launcher an earlier run or a hand-run configure recorded.
+CMAKE_CCACHE_ARGS=()
+CCACHE_VAR=""
+for var in CMAKE_CCACHE CMAKE_CXX_COMPILER_LAUNCHER CMAKE_C_COMPILER_LAUNCHER; do
+    if [ -n "${!var:-}" ]; then
+        CCACHE_VAR=$var
+        break
+    fi
+done
+if [ -n "$CCACHE_VAR" ]; then
+    CCACHE_PROGRAM=${!CCACHE_VAR}
+    echo "Checking ${CCACHE_VAR} environment variable for compiler cache program..."
+    CMAKE_CCACHE=$(command -v "${CCACHE_PROGRAM}") || {
+        echo "${CCACHE_VAR} environment variable is set to '${CCACHE_PROGRAM}' but it was not found in PATH."
+        CMAKE_CCACHE=""
+    }
+elif command -v sccache >/dev/null 2>&1 ; then
+    CMAKE_CCACHE=$(command -v sccache)
+elif command -v ccache >/dev/null 2>&1 ; then
+    CMAKE_CCACHE=$(command -v ccache)
+fi
+if [ -n "${CMAKE_CCACHE}" ] ; then
+    echo "${CMAKE_CCACHE} found, enabling compiler caching..."
+    CMAKE_CCACHE_ARGS=(-DCMAKE_C_COMPILER_LAUNCHER="${CMAKE_CCACHE}" -DCMAKE_CXX_COMPILER_LAUNCHER="${CMAKE_CCACHE}")
+    # The same ccache settings as the CI build. Without this sloppiness ccache refuses every
+    # compile that uses the precompiled header, which is most of OrcaSlicer, and skips headers
+    # a checkout has just written. It is added to the sloppiness already configured, and
+    # CCACHE_SLOPPINESS or CCACHE_(NO)DEPEND set in the environment win.
+    if [[ "$(basename "${CMAKE_CCACHE}")" == ccache ]] ; then
+        if [[ -z "${CCACHE_SLOPPINESS+x}" ]] ; then
+            CCACHE_SLOPPINESS=$("${CMAKE_CCACHE}" --get-config sloppiness 2>/dev/null || true)
+            export CCACHE_SLOPPINESS="${CCACHE_SLOPPINESS:+${CCACHE_SLOPPINESS},}pch_defines,time_macros,include_file_mtime,include_file_ctime"
+        fi
+        # Hash the includes the compiler reports instead of preprocessing every miss.
+        if [[ -z "${CCACHE_DEPEND+x}${CCACHE_NODEPEND+x}" ]] ; then
+            export CCACHE_DEPEND=1
+        fi
+    fi
+else
+    echo "Note: ccache or sccache are not found. Install either of them for faster rebuilds."
+    # Clear a launcher recorded by an earlier configure. The entries must be set empty rather
+    # than removed: CMake fills a missing launcher entry from the environment.
+    CMAKE_CCACHE_ARGS=(-DCMAKE_C_COMPILER_LAUNCHER:STRING= -DCMAKE_CXX_COMPILER_LAUNCHER:STRING=)
+fi
+
 echo "Build params:"
 echo " - ARCH: $ARCH"
 echo " - BUILD_CONFIG: $BUILD_CONFIG"
@@ -162,6 +210,7 @@ function build_deps() {
                         -DCMAKE_OSX_ARCHITECTURES:STRING="${_ARCH}" \
                         -DCMAKE_OSX_DEPLOYMENT_TARGET="${OSX_DEPLOYMENT_TARGET}" \
                         -DCMAKE_IGNORE_PREFIX_PATH="${CMAKE_IGNORE_PREFIX_PATH}" \
+                        "${CMAKE_CCACHE_ARGS[@]}" \
                         ${CMAKE_POLICY_COMPAT}
                 fi
                 cmake --build . --config "$BUILD_CONFIG" --target deps
@@ -264,6 +313,7 @@ function build_slicer() {
                     -DCMAKE_OSX_ARCHITECTURES="${_ARCH}" \
                     -DCMAKE_OSX_DEPLOYMENT_TARGET="${OSX_DEPLOYMENT_TARGET}" \
                     -DCMAKE_IGNORE_PREFIX_PATH="${CMAKE_IGNORE_PREFIX_PATH}" \
+                    "${CMAKE_CCACHE_ARGS[@]}" \
                     ${CMAKE_POLICY_COMPAT}
             fi
             cmake --build . --config "$BUILD_CONFIG" --target "$SLICER_BUILD_TARGET"

deps/JPEG/JPEG.cmake

@@ -1,22 +1,7 @@
-if(CMAKE_SYSTEM_NAME STREQUAL "Linux")
-    if (JPEG_VERSION STREQUAL "6")
-        message("Using Jpeg Lib 62")
-        set(jpeg_flag "")
-    elseif (JPEG_VERSION STREQUAL "7")
-        message("Using Jpeg Lib 70")
-        set(jpeg_flag "-DWITH_JPEG7=ON")
-    else ()
-        message("Using Jpeg Lib 80")
-        set(jpeg_flag "-DWITH_JPEG8=ON")
-    endif ()
-endif()
-
 orcaslicer_add_cmake_project(JPEG
-    URL https://github.com/libjpeg-turbo/libjpeg-turbo/archive/refs/tags/3.0.1.zip
-    URL_HASH SHA256=d6d99e693366bc03897677650e8b2dfa76b5d6c54e2c9e70c03f0af821b0a52f
-    DEPENDS ${ZLIB_PKG}
+    URL https://github.com/libjpeg-turbo/libjpeg-turbo/archive/refs/tags/3.2.0.zip
+    URL_HASH SHA256=1b4c2cb6cba1ca5e53b9e85eeeab02154cab4b70894c96e97a9c747a26d19d63
     CMAKE_ARGS
         -DENABLE_SHARED=OFF
         -DENABLE_STATIC=ON
-        ${jpeg_flag}
 )

deps/OpenSSL/OpenSSL.cmake

@@ -16,6 +16,8 @@ else()
 	endif()
 endif()
 
+set(_openssl_dir ${DESTDIR})
+
 if(WIN32)
     set(_openssl_msvc_env CC=cl CXX=cl RC=rc CL=/FS)
     # OpenSSL's perl Configure honors the CC environment variable, but the
@@ -43,6 +45,14 @@ if(WIN32)
 else()
     if(APPLE)
         set(_conf_cmd export MACOSX_DEPLOYMENT_TARGET=${CMAKE_OSX_DEPLOYMENT_TARGET} && ./Configure -mmacosx-version-min=${CMAKE_OSX_DEPLOYMENT_TARGET})
+        # OPENSSLDIR is only where OpenSSL looks at runtime for cert.pem, certs/
+        # and openssl.cnf; install_sw installs nothing there. Point it at the
+        # system CA bundle, the one libcurl already uses here, so the bundled
+        # Python's ssl module can verify HTTPS. Elsewhere it stays the prefix:
+        # Windows Python reads the system certificate store, and on Linux, where
+        # the bundle's location differs by distro, CurlGlobalInit points
+        # SSL_CERT_FILE at it at startup.
+        set(_openssl_dir /etc/ssl)
     else()
         # A static library that is embedded into a shared object must not export
         # its symbols. On Linux the running process also loads the system OpenSSL
@@ -81,7 +91,7 @@ ExternalProject_Add(dep_OpenSSL
     # URL_HASH SHA256=8c776993154652d0bb393f506d850b811517c8bd8d24b1008aef57fbe55d3f31
     DOWNLOAD_DIR ${DEP_DOWNLOAD_DIR}/OpenSSL
 	CONFIGURE_COMMAND ${_conf_cmd} ${_cross_arch}
-        "--openssldir=${DESTDIR}"
+        "--openssldir=${_openssl_dir}"
         "--prefix=${DESTDIR}"
         # OpenSSL's linux-x86_64 target sets multilib=64, so it installs to
         # <prefix>/lib64 while every other dep uses <prefix>/lib. CPython's
@@ -115,12 +125,12 @@ ExternalProject_Add_Step(dep_OpenSSL install_cmake_files
     WORKING_DIRECTORY "${CMAKE_CURRENT_LIST_DIR}"
 )
 
-if (NOT WIN32 AND NOT APPLE)
-    # OpenSSL's object rules do not depend on CFLAGS, so reconfiguring it (for
-    # example to add -fvisibility=hidden) relinks the archives from stale
-    # objects instead of recompiling them, and the change silently has no
-    # effect. Drop the objects whenever this recipe changes so the next build
-    # actually recompiles them.
+if (NOT WIN32)
+    # OpenSSL's object rules do not depend on the configured flags or paths, so
+    # reconfiguring it (a new compiler flag, a different --openssldir) relinks
+    # the archives from stale objects instead of recompiling them, and the
+    # change silently has no effect. Drop the objects whenever this recipe
+    # changes so the next build actually recompiles them.
     ExternalProject_Get_Property(dep_OpenSSL SOURCE_DIR)
     ExternalProject_Add_Step(dep_OpenSSL clean_objects
         DEPENDEES configure

deps/python3/python3.cmake

@@ -365,10 +365,11 @@ if(TARGET dep_ZLIB)
     add_dependencies(dep_python3 dep_ZLIB)
 endif()
 
-if (NOT WIN32 AND NOT APPLE)
-    # CPython's Makefile rules for _ssl and _hashlib depend only on their own
-    # sources, not on the OpenSSL archives, so a rebuilt OpenSSL does not make
-    # them relink and they keep the previous symbols. On an incremental tree,
+if (NOT WIN32)
+    # _ssl and _hashlib embed the static OpenSSL built in deps/ (Windows uses
+    # CPython's prebuilt OpenSSL instead). Their Makefile rules depend only on
+    # their own sources, not on the OpenSSL archives, so a rebuilt OpenSSL does
+    # not make them relink and they keep the previous one. On an incremental tree,
     # drop the built modules and relink them against the current OpenSSL; a
     # fresh build is left alone (its PGO target builds them). "make" alone is a
     # no-op once PGO has run, so sharedmods is invoked explicitly.

docs/HLSD/keyboard-shortcuts.md

@@ -53,6 +53,13 @@ Space counts as typing. The speed dial's default is the one bare Space, and
 `MainFrame` leaves it to a focused control that uses Space itself (text fields, buttons,
 combo boxes), so it opens the dial from the canvases and the tab strip only.
 
+`MainFrame::handle_global_shortcut` skips a chord that `KeyChord::edits_text()` reports
+while a text field has the focus (a wx text entry, spin control, web view or ImGui
+InputText), and skips every chord while an ImGui modal is open, as a wx modal dialog
+would. `ImGuiWrapper::owns_key()` reads the active InputText and the popup stack
+directly, since `WantCaptureKeyboard` lags a frame, and is called only when the focus is on
+a visible canvas from `OpenGLManager::create_wxglcanvas()`.
+
 ## Which event a chord matches
 
 Letters, digits and special keys match on `wxEVT_KEY_DOWN`. Its key codes do not depend

resources/images/toolbar_tooltip.svg

@@ -1 +1 @@
-<?xml version="1.0" encoding="UTF-8"?><svg id="a" xmlns="http://www.w3.org/2000/svg" viewBox="0 0 15 15"><rect x="7" y="12" width="1" height="1" style="fill:#fefefe;"/><path d="M4.5,5.5c0-1.71,1.43-3.09,3.16-3,1.62.08,2.84,1.54,2.84,3.17h0c0,.61-.25,1.2-.69,1.62l-2.31,2.24v.97" style="fill:none; stroke:#fefefe; stroke-linecap:round; stroke-linejoin:round;"/></svg>
+<?xml version="1.0" encoding="UTF-8"?><svg id="a" xmlns="http://www.w3.org/2000/svg" viewBox="0 0 15 15"><rect x="1.5" y="3.5" width="12" height="8" rx="1" ry="1" style="fill:none; stroke:#fefefe; stroke-linecap:round; stroke-linejoin:round;"/><path d="M3,5h1v1h-1Z M5,5h1v1h-1Z M7,5h1v1h-1Z M9,5h1v1h-1Z M11,5h1v1h-1Z M4,7h1v1h-1Z M6,7h1v1h-1Z M8,7h1v1h-1Z M10,7h1v1h-1Z M5,9h5v1h-5Z" style="fill:#fefefe;"/></svg>

resources/profiles/OrcaFilamentLibrary.json

@@ -592,6 +592,10 @@
 			"name": "SUNLU PETG @base",
 			"sub_path": "filament/SUNLU/SUNLU PETG @base.json"
 		},
+		{
+			"name": "School House Spools PETG @base",
+			"sub_path": "filament/SchoolHouseSpools/School House Spools PETG @base.json"
+		},
 		{
 			"name": "eSUN PETG @base",
 			"sub_path": "filament/eSUN/eSUN PETG @base.json"
@@ -1096,6 +1100,10 @@
 			"name": "SUNLU Wood PLA @base",
 			"sub_path": "filament/SUNLU/SUNLU Wood PLA @base.json"
 		},
+		{
+			"name": "School House Spools PLA @base",
+			"sub_path": "filament/SchoolHouseSpools/School House Spools PLA @base.json"
+		},
 		{
 			"name": "Valment PLA @base",
 			"sub_path": "filament/Valment/Valment PLA @base.json"
@@ -2260,6 +2268,10 @@
 			"name": "SUNLU PETG @System",
 			"sub_path": "filament/SUNLU/SUNLU PETG @System.json"
 		},
+		{
+			"name": "School House Spools PETG @System",
+			"sub_path": "filament/SchoolHouseSpools/School House Spools PETG @System.json"
+		},
 		{
 			"name": "eSUN PETG @System",
 			"sub_path": "filament/eSUN/eSUN PETG @System.json"
@@ -3812,6 +3824,10 @@
 			"name": "SUNLU Wood PLA @System",
 			"sub_path": "filament/SUNLU/SUNLU Wood PLA @System.json"
 		},
+		{
+			"name": "School House Spools PLA @System",
+			"sub_path": "filament/SchoolHouseSpools/School House Spools PLA @System.json"
+		},
 		{
 			"name": "Valment PLA @System",
 			"sub_path": "filament/Valment/Valment PLA @System.json"

resources/profiles/OrcaFilamentLibrary/filament/SchoolHouseSpools/School House Spools PETG @System.json

@@ -0,0 +1,18 @@
+{
+	"type": "filament",
+	"name": "School House Spools PETG @System",
+	"inherits": "School House Spools PETG @base",
+	"from": "system",
+	"setting_id": "RSu2orfhR8ktT36h",
+	"instantiation": "true",
+	"filament_max_volumetric_speed": [
+		"13"
+	],
+	"filament_long_retractions_when_cut": [
+		"1"
+	],
+	"filament_retraction_distances_when_cut": [
+		"18"
+	],
+	"compatible_printers": []
+}

resources/profiles/OrcaFilamentLibrary/filament/SchoolHouseSpools/School House Spools PETG @base.json

@@ -0,0 +1,80 @@
+{
+	"type": "filament",
+	"name": "School House Spools PETG @base",
+	"inherits": "fdm_filament_pet",
+	"from": "system",
+	"filament_id": "OFnaCGQ9",
+	"instantiation": "false",
+	"cool_plate_temp": [
+		"0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"70"
+	],
+	"eng_plate_temp_initial_layer": [
+		"70"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"40"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"filament_cost": [
+		"16.00"
+	],
+	"filament_density": [
+		"1.25"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_max_volumetric_speed": [
+		"8"
+	],
+	"filament_multitool_ramming_flow": [
+		"8"
+	],
+	"filament_vendor": [
+		"School House Spools"
+	],
+	"hot_plate_temp": [
+		"70"
+	],
+	"hot_plate_temp_initial_layer": [
+		"70"
+	],
+	"nozzle_temperature": [
+		"252"
+	],
+	"nozzle_temperature_initial_layer": [
+		"252"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"230"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"textured_plate_temp": [
+		"70"
+	],
+	"textured_plate_temp_initial_layer": [
+		"70"
+	]
+}

resources/profiles/OrcaFilamentLibrary/filament/SchoolHouseSpools/School House Spools PLA @System.json

@@ -0,0 +1,18 @@
+{
+	"type": "filament",
+	"name": "School House Spools PLA @System",
+	"inherits": "School House Spools PLA @base",
+	"from": "system",
+	"setting_id": "3rHJk6SVAvFzyHI0",
+	"instantiation": "true",
+	"filament_max_volumetric_speed": [
+		"21"
+	],
+	"filament_long_retractions_when_cut": [
+		"1"
+	],
+	"filament_retraction_distances_when_cut": [
+		"18"
+	],
+	"compatible_printers": []
+}

resources/profiles/OrcaFilamentLibrary/filament/SchoolHouseSpools/School House Spools PLA @base.json

@@ -0,0 +1,35 @@
+{
+	"type": "filament",
+	"name": "School House Spools PLA @base",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"filament_id": "OFHzwmT9",
+	"instantiation": "false",
+	"filament_cost": [
+		"17.00"
+	],
+	"filament_density": [
+		"1.26"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"filament_vendor": [
+		"School House Spools"
+	],
+	"filament_scarf_seam_type": [
+		"none"
+	],
+	"filament_scarf_height": [
+		"10%"
+	],
+	"filament_scarf_gap": [
+		"0%"
+	],
+	"filament_scarf_length": [
+		"10"
+	]
+}

resources/profiles/Ratrig.json

@@ -1,6 +1,6 @@
 {
 	"name": "RatRig",
-	"version": "02.04.00.06",
+	"version": "02.04.00.07",
 	"force_update": "0",
 	"description": "RatRig configurations",
 	"machine_model_list": [

resources/profiles/Ratrig/machine/RatRig V-Core 4 300 0.4 nozzle.json

@@ -106,7 +106,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 300 0.5 nozzle.json

@@ -106,7 +106,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 300 0.6 nozzle.json

@@ -106,7 +106,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 300 0.8 nozzle.json

@@ -107,7 +107,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 400 0.4 nozzle.json

@@ -106,7 +106,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 400 0.5 nozzle.json

@@ -106,7 +106,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 400 0.6 nozzle.json

@@ -106,7 +106,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 400 0.8 nozzle.json

@@ -107,7 +107,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 500 0.4 nozzle.json

@@ -106,7 +106,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 500 0.5 nozzle.json

@@ -106,7 +106,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 500 0.6 nozzle.json

@@ -106,7 +106,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 500 0.8 nozzle.json

@@ -107,7 +107,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 300 0.4 nozzle.json

@@ -106,7 +106,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 300 0.5 nozzle.json

@@ -106,7 +106,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 300 0.6 nozzle.json

@@ -106,7 +106,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 300 0.8 nozzle.json

@@ -106,7 +106,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 400 0.4 nozzle.json

@@ -106,7 +106,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 400 0.5 nozzle.json

@@ -106,7 +106,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 400 0.6 nozzle.json

@@ -106,7 +106,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 400 0.8 nozzle.json

@@ -106,7 +106,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 500 0.4 nozzle.json

@@ -106,7 +106,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 500 0.5 nozzle.json

@@ -106,7 +106,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 500 0.6 nozzle.json

@@ -106,7 +106,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 500 0.8 nozzle.json

@@ -106,7 +106,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/fdm_klipper_common.json

@@ -131,7 +131,7 @@
 	"bed_exclude_area": [
 		"0x0"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single]",
 	"machine_end_gcode": "END_PRINT",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",

resources/profiles/Snapmaker.json

@@ -1,6 +1,6 @@
 {
 	"name": "Snapmaker",
-	"version": "02.04.00.17",
+	"version": "02.04.00.18",
 	"force_update": "0",
 	"description": "Snapmaker configurations",
 	"machine_model_list": [

resources/profiles/Snapmaker/filament/Snapmaker ABS @U1 base.json

@@ -49,5 +49,8 @@
 	],
 	"pressure_advance": [
 		"0.02"
+	],
+	"temperature_vitrification": [
+		"100"
 	]
 }

resources/profiles/Snapmaker/filament/Snapmaker ASA @U1 base.json

@@ -46,5 +46,8 @@
 	],
 	"fan_min_speed": [
 		"0"
+	],
+	"temperature_vitrification": [
+		"100"
 	]
 }

resources/profiles/Snapmaker/filament/Snapmaker PETG @U1 base.json

@@ -45,7 +45,7 @@
 		"250"
 	],
 	"temperature_vitrification": [
-		"178"
+		"70"
 	],
 	"fan_max_speed": [
 		"20"

resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 base.json

@@ -4,5 +4,8 @@
 	"inherits": "fdm_filament_petg",
 	"from": "system",
 	"filament_id": "OFW8lqnb",
-	"instantiation": "false"
+	"instantiation": "false",
+	"temperature_vitrification": [
+		"70"
+	]
 }

resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1 base.json

@@ -60,7 +60,7 @@
 		"250"
 	],
 	"temperature_vitrification": [
-		"178"
+		"70"
 	],
 	"fan_max_speed": [
 		"20"

resources/profiles/Snapmaker/filament/Snapmaker PLA @U1 base.json

@@ -34,5 +34,8 @@
 	],
 	"nozzle_temperature": [
 		"220"
+	],
+	"temperature_vitrification": [
+		"45"
 	]
 }

resources/profiles/Snapmaker/filament/Snapmaker PLA Eco @U1 base.json

@@ -34,5 +34,8 @@
 	],
 	"filament_cooling_final_speed": [
 		"60"
+	],
+	"temperature_vitrification": [
+		"45"
 	]
 }

resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 base.json

@@ -34,5 +34,8 @@
 	],
 	"nozzle_temperature": [
 		"220"
+	],
+	"temperature_vitrification": [
+		"45"
 	]
 }

resources/profiles/Snapmaker/filament/Snapmaker PLA Metal @U1 base.json

@@ -40,5 +40,8 @@
 	],
 	"nozzle_temperature": [
 		"220"
+	],
+	"temperature_vitrification": [
+		"45"
 	]
 }

resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 base.json

@@ -31,5 +31,8 @@
 	],
 	"slow_down_layer_time": [
 		"8"
+	],
+	"temperature_vitrification": [
+		"45"
 	]
 }

resources/profiles/Snapmaker/filament/Snapmaker TPE @U1.json

@@ -50,5 +50,8 @@
 	"additional_cooling_fan_speed": [
 		"70",
 		"70"
+	],
+	"temperature_vitrification": [
+		"30"
 	]
 }

resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1 base.json

@@ -137,7 +137,7 @@
 		"240"
 	],
 	"temperature_vitrification": [
-		"60"
+		"30"
 	],
 	"nozzle_temperature_range_low": [
 		"200"

resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1.json

@@ -302,7 +302,7 @@
 		"-1"
 	],
 	"temperature_vitrification": [
-		"60"
+		"30"
 	],
 	"textured_cool_plate_temp": [
 		"40"

resources/profiles/Snapmaker/filament/Snapmaker TPU @U1.json

@@ -29,5 +29,8 @@
 	"additional_cooling_fan_speed": [
 		"70",
 		"70"
+	],
+	"temperature_vitrification": [
+		"30"
 	]
 }

resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1.json

@@ -49,5 +49,8 @@
 	"additional_cooling_fan_speed": [
 		"70",
 		"70"
+	],
+	"temperature_vitrification": [
+		"30"
 	]
 }

resources/profiles/Snapmaker/machine/Snapmaker U1 (0.2 nozzle).json

@@ -97,7 +97,7 @@
 		"20",
 		"12"
 	],
-	"machine_start_gcode": "SET_PRINT_AUTO_BED_LEVELING ENABLE=1\nSET_TIME_LAPSE_CAMERA ENABLE=1\n;===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\n{if curr_bed_type==\"High Temp Plate\"}                                                                                                                                                                                                               \nG28 Z Z_OFFSET -0.07                                                                                                                                                                                                                                    \n{else}                                                                                                                                                                                                               \nG28 Z                                                                                                                                                                                                                                                                                                                                                                                                                                                                          \n{endif} \n\n\n;===== 热床调平 =================\n{if curr_bed_type==\"High Temp Plate\"}                                                                                                                                                                                                               \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0 Z_OFFSET=-0.07\n{else}                                                                                                                                                                                                               \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0\n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0",
+	"machine_start_gcode": "SET_PRINT_AUTO_BED_LEVELING ENABLE=1\nSET_TIME_LAPSE_CAMERA ENABLE=1\n;===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\n;===== top cover purifier =====\n{if min_vitrification_temperature <= 50}\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=42 ALARM_TEMP=48 FAN_SPEED=0.6 DELAY_OFF=0 ; strong cooling\n{elsif min_vitrification_temperature <= 70}\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=45 ALARM_TEMP=51 FAN_SPEED=0.6 DELAY_OFF=0 ; weak cooling\n{else}\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=600 ; keep warm\n{endif}\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\n\n;==== 预挤出耗材 =====\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder]}\nT{initial_extruder}\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder]}\nSM_PRINT_PREEXTRUDE_FILAMENT INDEX={initial_extruder}\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nM107\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nM107\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nM106 S255\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\nM107\n{if curr_bed_type==\"High Temp Plate\"}                                                                                                                                                                                                               \nG28 Z Z_OFFSET -0.07                                                                                                                                                                                                                                    \n{else}                                                                                                                                                                                                               \nG28 Z                                                                                                                                                                                                                                                                                                                                                                                                                                                                          \n{endif} \n\n\n;===== 热床调平 =================\nM107\n{if curr_bed_type==\"High Temp Plate\"}                                                                                                                                                                                                               \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0 Z_OFFSET=-0.07\n{else}                                                                                                                                                                                                               \n; AlwLine truncated
 	"machine_tool_change_time": "5",
 	"max_layer_height": [
 		"0.14",

resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 nozzle).json

@@ -97,7 +97,7 @@
 		"20",
 		"12"
 	],
-	"machine_start_gcode": "SET_PRINT_AUTO_BED_LEVELING ENABLE=1\nSET_TIME_LAPSE_CAMERA ENABLE=1\n;===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\n{if curr_bed_type==\"High Temp Plate\"}                                                                                                                                                                                                               \nG28 Z Z_OFFSET -0.07                                                                                                                                                                                                                                    \n{else}                                                                                                                                                                                                               \nG28 Z                                                                                                                                                                                                                                                                                                                                                                                                                                                                          \n{endif} \n\n\n;===== 热床调平 =================\n{if curr_bed_type==\"High Temp Plate\"}                                                                                                                                                                                                               \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0 Z_OFFSET=-0.07\n{else}                                                                                                                                                                                                               \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0\n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0",
+	"machine_start_gcode": "SET_PRINT_AUTO_BED_LEVELING ENABLE=1\nSET_TIME_LAPSE_CAMERA ENABLE=1\n;===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\n;===== top cover purifier =====\n{if min_vitrification_temperature <= 50}\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=42 ALARM_TEMP=48 FAN_SPEED=0.6 DELAY_OFF=0 ; strong cooling\n{elsif min_vitrification_temperature <= 70}\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=45 ALARM_TEMP=51 FAN_SPEED=0.6 DELAY_OFF=0 ; weak cooling\n{else}\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=600 ; keep warm\n{endif}\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\n\n;==== 预挤出耗材 =====\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder]}\nT{initial_extruder}\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder]}\nSM_PRINT_PREEXTRUDE_FILAMENT INDEX={initial_extruder}\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nM107\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nM107\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nM106 S255\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\nM107\n{if curr_bed_type==\"High Temp Plate\"}                                                                                                                                                                                                               \nG28 Z Z_OFFSET -0.07                                                                                                                                                                                                                                    \n{else}                                                                                                                                                                                                               \nG28 Z                                                                                                                                                                                                                                                                                                                                                                                                                                                                          \n{endif} \n\n\n;===== 热床调平 =================\nM107\n{if curr_bed_type==\"High Temp Plate\"}                                                                                                                                                                                                               \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0 Z_OFFSET=-0.07\n{else}                                                                                                                                                                                                               \n; AlwLine truncated
 	"machine_tool_change_time": "5",
 	"max_layer_height": [
 		"0.32",

resources/profiles/Snapmaker/machine/Snapmaker U1 (0.6 nozzle).json

@@ -97,7 +97,7 @@
 		"20",
 		"12"
 	],
-	"machine_start_gcode": "SET_PRINT_AUTO_BED_LEVELING ENABLE=1\nSET_TIME_LAPSE_CAMERA ENABLE=1\n;===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\n{if curr_bed_type==\"High Temp Plate\"}                                                                                                                                                                                                               \nG28 Z Z_OFFSET -0.07                                                                                                                                                                                                                                    \n{else}                                                                                                                                                                                                               \nG28 Z                                                                                                                                                                                                                                                                                                                                                                                                                                                                          \n{endif} \n\n\n;===== 热床调平 =================\n{if curr_bed_type==\"High Temp Plate\"}                                                                                                                                                                                                               \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0 Z_OFFSET=-0.07\n{else}                                                                                                                                                                                                               \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0\n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0",
+	"machine_start_gcode": "SET_PRINT_AUTO_BED_LEVELING ENABLE=1\nSET_TIME_LAPSE_CAMERA ENABLE=1\n;===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\n;===== top cover purifier =====\n{if min_vitrification_temperature <= 50}\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=42 ALARM_TEMP=48 FAN_SPEED=0.6 DELAY_OFF=0 ; strong cooling\n{elsif min_vitrification_temperature <= 70}\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=45 ALARM_TEMP=51 FAN_SPEED=0.6 DELAY_OFF=0 ; weak cooling\n{else}\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=600 ; keep warm\n{endif}\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\n\n;==== 预挤出耗材 =====\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder]}\nT{initial_extruder}\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder]}\nSM_PRINT_PREEXTRUDE_FILAMENT INDEX={initial_extruder}\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nM107\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nM107\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nM106 S255\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\nM107\n{if curr_bed_type==\"High Temp Plate\"}                                                                                                                                                                                                               \nG28 Z Z_OFFSET -0.07                                                                                                                                                                                                                                    \n{else}                                                                                                                                                                                                               \nG28 Z                                                                                                                                                                                                                                                                                                                                                                                                                                                                          \n{endif} \n\n\n;===== 热床调平 =================\nM107\n{if curr_bed_type==\"High Temp Plate\"}                                                                                                                                                                                                               \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0 Z_OFFSET=-0.07\n{else}                                                                                                                                                                                                               \n; AlwLine truncated
 	"machine_tool_change_time": "5",
 	"max_layer_height": [
 		"0.42",

resources/profiles/Snapmaker/machine/Snapmaker U1 (0.8 nozzle).json

@@ -97,7 +97,7 @@
 		"20",
 		"12"
 	],
-	"machine_start_gcode": "SET_PRINT_AUTO_BED_LEVELING ENABLE=1\nSET_TIME_LAPSE_CAMERA ENABLE=1\n;===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\n{if curr_bed_type==\"High Temp Plate\"}                                                                                                                                                                                                               \nG28 Z Z_OFFSET -0.07                                                                                                                                                                                                                                    \n{else}                                                                                                                                                                                                               \nG28 Z                                                                                                                                                                                                                                                                                                                                                                                                                                                                          \n{endif} \n\n\n;===== 热床调平 =================\n{if curr_bed_type==\"High Temp Plate\"}                                                                                                                                                                                                               \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0 Z_OFFSET=-0.07\n{else}                                                                                                                                                                                                               \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0\n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0",
+	"machine_start_gcode": "SET_PRINT_AUTO_BED_LEVELING ENABLE=1\nSET_TIME_LAPSE_CAMERA ENABLE=1\n;===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\n;===== top cover purifier =====\n{if min_vitrification_temperature <= 50}\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=42 ALARM_TEMP=48 FAN_SPEED=0.6 DELAY_OFF=0 ; strong cooling\n{elsif min_vitrification_temperature <= 70}\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=45 ALARM_TEMP=51 FAN_SPEED=0.6 DELAY_OFF=0 ; weak cooling\n{else}\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=600 ; keep warm\n{endif}\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\n\n;==== 预挤出耗材 =====\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder]}\nT{initial_extruder}\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder]}\nSM_PRINT_PREEXTRUDE_FILAMENT INDEX={initial_extruder}\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nM107\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nM107\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nM106 S255\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\nM107\n{if curr_bed_type==\"High Temp Plate\"}                                                                                                                                                                                                               \nG28 Z Z_OFFSET -0.07                                                                                                                                                                                                                                    \n{else}                                                                                                                                                                                                               \nG28 Z                                                                                                                                                                                                                                                                                                                                                                                                                                                                          \n{endif} \n\n\n;===== 热床调平 =================\nM107\n{if curr_bed_type==\"High Temp Plate\"}                                                                                                                                                                                                               \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0 Z_OFFSET=-0.07\n{else}                                                                                                                                                                                                               \n; AlwLine truncated
 	"machine_tool_change_time": "5",
 	"max_layer_height": [
 		"0.56",

resources/web/dialog/ColorPickerDialog/palettes.js

@@ -109,7 +109,7 @@ const cssColors = [
   {hex: "#800080", name: "Purple"},
   {hex: "#663399", name: "Rebecca purple"},
   {hex: "#C71585", name: "Medium violet red"},
-  {hex: "#DB7093", name: "PaleV violet red"},
+  {hex: "#DB7093", name: "Pale violet red"},
   {hex: "#FF1493", name: "Deep pink"},
   {hex: "#FF69B4", name: "Hot pink"},
   {hex: "#FFB6C1", name: "Light pink"},
@@ -193,7 +193,7 @@ const palettes = {
     {hex: "#40E0D0", name: "Turquoise bay"},
     {hex: "#2EBDEF", name: "Sky over reef"},
     {hex: "#87CEEB", name: "Shallow sky"},
-    {hex: "#1E90FF", name: "Electric bel"},
+    {hex: "#1E90FF", name: "Electric blue"},
     {hex: "#4169E1", name: "Dolphin"},
     {hex: "#0000CD", name: "Ocean depths"},
     {hex: "#191970", name: "Whale"},
@@ -219,7 +219,7 @@ const palettes = {
     {hex: "#EFBF04", name: "1004 Golden yellow"},
     {hex: "#D7A500", name: "1005 Honey yellow"},
     {hex: "#F2D185", name: "1006 Maize yellow"},
-    {hex: "#FDD185", name: "1007 Dalmatian yellow"},
+    {hex: "#FDD185", name: "1007 Daffodil yellow"},
     {hex: "#8B7D6B", name: "1011 Brown beige"},
     {hex: "#F5DB50", name: "1012 Lemon yellow"},
     {hex: "#F3E5AB", name: "1013 Oyster white"},
@@ -318,7 +318,7 @@ const palettes = {
     {hex: "#0384A7", name: "5015 Sky blue"},
     {hex: "#006A9E", name: "5017 Traffic blue"},
     {hex: "#005F87", name: "5018 Turquoise blue"},
-    {hex: "#5A3D5B", name: "5019 Capsanthin violet"},
+    {hex: "#1B5583", name: "5019 Capri blue"},
     {hex: "#04749F", name: "5020 Ocean blue"},
     {hex: "#009AAA", name: "5021 Water blue"},
     {hex: "#1A3D5F", name: "5022 Night blue"},
@@ -366,7 +366,7 @@ const palettes = {
     {hex: "#00A550", name: "6039 Mint green"},
     {hex: "#7D7D7D", name: "7000 Squirrel grey"},
     {hex: "#A8A9AD", name: "7001 Silver grey"},
-    {hex: "#6F7368", name: "7002 Olivestone"},
+    {hex: "#6F7368", name: "7002 Olive grey"},
     {hex: "#8F9080", name: "7003 Moss grey"},
     {hex: "#8E9291", name: "7004 Signal grey"},
     {hex: "#8B8788", name: "7005 Mouse grey"},

resources/web/dialog/PluginsDialog/index.html

@@ -18,7 +18,7 @@
   <script src="../js/plugin-config-ui.js"></script>
   <script src="./index.js"></script>
   <script src="./plugin-sort.js"></script>
-  <script src="../js/fuzzy-search.js"></script>
+  <script src="../../js/fuzzy-search.js"></script>
   <script src="./plugin-search.js"></script>
 </head>
 <body onLoad="OnInit()">

resources/web/homepage/js/home.js

@@ -156,12 +156,16 @@ function SetCloudMode( bOn )
 
 	m_CloudMode=bOn;
 	$("body").toggleClass("cloud-mode", bOn);
+
+	if( bOn )
+	{
+		$(".BtnItem").removeClass("BtnItemSelected");
+		$(".BtnShortcut").addClass("BtnItemSelected");
+	}
 }
 
 function GotoCloud()
 {
-	$(".BtnItem").removeClass("BtnItemSelected");
-	$(".BtnShortcut").addClass("BtnItemSelected");
 	SetCloudMode(true);
 	SendSimpleCommand("homepage_open_cloud");
 }

scripts/flatpak/com.orcaslicer.OrcaSlicer.yml

@@ -336,10 +336,10 @@ modules:
         sha256: 3d22d46c566b1761a0e15ea397589b3a5f36ac09b7c785382e6470156c04247f
         dest: external-packages/PNG
 
-      # libjpeg-turbo 3.0.1
+      # libjpeg-turbo 3.2.0
       - type: file
-        url: https://github.com/libjpeg-turbo/libjpeg-turbo/archive/refs/tags/3.0.1.zip
-        sha256: d6d99e693366bc03897677650e8b2dfa76b5d6c54e2c9e70c03f0af821b0a52f
+        url: https://github.com/libjpeg-turbo/libjpeg-turbo/archive/refs/tags/3.2.0.zip
+        sha256: 1b4c2cb6cba1ca5e53b9e85eeeab02154cab4b70894c96e97a9c747a26d19d63
         dest: external-packages/JPEG
 
       # Freetype 2.12.1

scripts/flatpak/entrypoint

@@ -1,7 +1,7 @@
 #!/usr/bin/env sh
 
-# Work-around https://gitlab.gnome.org/GNOME/gnome-build-meta/-/issues/754
-grep -q org.freedesktop.Platform.GL.nvidia /.flatpak-info && export WEBKIT_DISABLE_DMABUF_RENDERER=1
+# WebKit's NVIDIA DMABUF workaround (gnome-build-meta#754) is applied by the
+# binary itself, gated on the runtime WebKitGTK version (src/OrcaSlicer.cpp).
 
 # Work-around https://github.com/bambulab/BambuStudio/issues/3440
 # Use LC_NUMERIC instead of LC_ALL to prevent decimal separator issues

scripts/orca_profile_tool.py

@@ -12,6 +12,7 @@ commands:
   trim             delete profile files no <vendor>.json list references
   update-index     regenerate the *_list sections of <vendor>.json
   legacy-compat    write the printers user presets can be migrated back to
+  gcode-diff       print a readable markdown diff of changed custom G-code
 
 options shared by several commands:
   --vendor VENDOR      act on one vendor bundle only; repeatable, empty means all
@@ -94,11 +95,14 @@ parent in the OFL map. filament_vendor / filament_type resolve the same way.
 """
 
 import argparse
+import difflib
 import functools
+import html
 import json
 import os
 import posixpath
 import re
+import subprocess
 import sys
 import uuid
 from collections import Counter, defaultdict
@@ -192,6 +196,7 @@ VECTOR_KEYS = {
 
 PRINT_CONFIG_CPP = os.path.normpath(
     os.path.join(SCRIPTS_DIR, "..", "src", "libslic3r", "PrintConfig.cpp"))
+TAB_CPP = os.path.normpath(os.path.join(SCRIPTS_DIR, "..", "src", "slic3r", "GUI", "Tab.cpp"))
 
 
 @functools.lru_cache(maxsize=None)
@@ -313,11 +318,11 @@ REMEDY_HINTS = {
 }
 
 
-def print_error(msg):
-    print(f"\033[91m[ERROR]\033[0m {msg}")  # Red
+def print_error(msg, file=None):
+    print(f"\033[91m[ERROR]\033[0m {msg}", file=file)  # Red
 
-def print_warning(msg):
-    print(f"\033[93m[WARNING]\033[0m {msg}")  # Yellow
+def print_warning(msg, file=None):
+    print(f"\033[93m[WARNING]\033[0m {msg}", file=file)  # Yellow
 
 def print_info(msg):
     print(f"\033[94m[INFO]\033[0m {msg}")  # Blue
@@ -3209,6 +3214,223 @@ def run_legacy_compat(base_dir, profiles_dir, output, check):
     return 0
 
 
+# ---------------------------------------------------------------------------
+# gcode-diff
+# ---------------------------------------------------------------------------
+
+# UTF-8 bytes, kept well under GitHub's 65,536-character comment limit.
+GCODE_DIFF_BUDGET = 60000
+# The file names a section's summary shows before "and N more".
+GCODE_DIFF_SUMMARY_FILES = 3
+
+GCODE_DIFF_HEADER = (
+    "## Custom G-code changes\n"
+    "\n"
+    "GitHub shows custom G-code in a profile as one long line, so below is a line by line "
+    "diff of each changed G-code or other text setting.\n")
+
+
+@functools.lru_cache(maxsize=None)
+def _text_option_keys():
+    """The string options PrintConfig.cpp defines as G-code or other multi-line text
+    (every *_gcode option, and every one it marks multiline, such as notes), plus the
+    ones Tab.cpp edits as code, such as filename_format."""
+    with open(PRINT_CONFIG_CPP, encoding="utf-8") as f:
+        source = f.read()
+    keys = set()
+    for body in re.split(r"\bdef\s*=\s*this->add(?:_nullable)?\(", source)[1:]:
+        match = re.match(r'"(\w+)",\s*coStrings?\b', body)
+        if match and (match.group(1).endswith("_gcode")
+                      or re.search(r"def->multiline\s*=\s*true", body)):
+            keys.add(match.group(1))
+    if "machine_start_gcode" not in keys:
+        raise RuntimeError(f"{PRINT_CONFIG_CPP} no longer defines machine_start_gcode")
+    # Tab.cpp only adds keys, so a missing file is not an error.
+    try:
+        with open(TAB_CPP, encoding="utf-8") as f:
+            gui = f.read()
+    except OSError:
+        gui = ""
+    keys.update(re.findall(r'get_option\("(\w+)"\);(?:(?!get_option\().)*?\bis_code\s*=\s*true',
+                           gui, re.DOTALL))
+    return frozenset(keys)
+
+
+def _git(cwd, *args, stdin=None):
+    return subprocess.run(["git", "-C", cwd, *args], input=stdin, check=True,
+                          capture_output=True).stdout
+
+
+def _blobs_at(profiles_dir, specs):
+    """{(ref, path): bytes, or None if not a file there} for (ref, path relative to
+    profiles_dir) pairs, all read by one git cat-file process."""
+    prefix = _git(profiles_dir, "rev-parse", "--show-prefix").decode("utf-8").strip()
+    out = _git(profiles_dir, "cat-file", "--batch",
+               stdin="".join(f"{ref}:{prefix}{rel}\n" for ref, rel in specs).encode("utf-8"))
+    blobs, pos = {}, 0
+    for spec in specs:
+        end = out.index(b"\n", pos)
+        header = out[pos:end]
+        pos = end + 1
+        # "<name> missing" and "<name> ambiguous" have no content; "<oid> <type> <size>" does.
+        if header.endswith((b" missing", b" ambiguous")):
+            blobs[spec] = None
+            continue
+        _oid, kind, size = header.split()
+        blobs[spec] = out[pos:pos + int(size)] if kind == b"blob" else None
+        pos += int(size) + 1
+    return blobs
+
+
+def _parse_profile(raw, rel, where):
+    """The JSON in raw, or None with a warning when it is absent or not JSON."""
+    if raw is None:
+        print_warning(f"{rel}: skipped, not found at {where}", file=sys.stderr)
+        return None
+    try:
+        return json.loads(raw.decode("utf-8-sig"))
+    except ValueError as e:
+        print_warning(f"{rel}: skipped, cannot read it at {where}: {e}", file=sys.stderr)
+        return None
+
+
+def _changed_profiles(profiles_dir, base, head):
+    """(old path, new path) of each JSON file under profiles_dir that differs between
+    base and head (the working tree, untracked files included, when None); the absent
+    side of an added or deleted file is None, and so is a side that is not JSON. Renames
+    are paired."""
+    out = _git(profiles_dir, "diff", "--name-status", "-z", "-M", "--relative", base,
+               *([head] if head else []), "--", ".")
+    fields = out.decode("utf-8").split("\0")
+    pairs, i = [], 0
+    while i + 1 < len(fields):
+        status = fields[i]
+        old = new = fields[i + 1]
+        if status[0] in "RC":
+            new = fields[i + 2]
+            i += 3
+        else:
+            i += 2
+        old = None if status[0] == "A" or not old.endswith(".json") else old
+        new = None if status[0] == "D" or not new.endswith(".json") else new
+        if old or new:
+            pairs.append((old, new))
+    if head is None:
+        out = _git(profiles_dir, "ls-files", "-z", "--others", "--exclude-standard", "--", ".")
+        pairs += [(None, rel) for rel in out.decode("utf-8").split("\0")
+                  if rel.endswith(".json") and rel.split("/")[0] != USER_DIR]
+    return pairs
+
+
+def _text_lines(value):
+    return [line.rstrip() for line in value.split("\n")] if value else []
+
+
+def _text_changes(old, new):
+    """(setting, unified diff) for every G-code or other text value that differs
+    between two profiles; a vector option with several values gives one per value."""
+    changes = []
+    for key in list(new) + [k for k in old if k not in new]:
+        a, b = _as_list(old.get(key, [])), _as_list(new.get(key, []))
+        if a == b or not all(isinstance(v, str) for v in a + b):
+            continue
+        if key not in _text_option_keys() and not any("\n" in v for v in a + b):
+            continue
+        width = max(len(a), len(b))
+        for i in range(width):
+            diff = list(difflib.unified_diff(
+                _text_lines(a[i] if i < len(a) else ""), _text_lines(b[i] if i < len(b) else ""),
+                lineterm=""))[2:]  # drops the ---/+++ file header
+            if diff:
+                changes.append((key if width == 1 else f"{key}[{i}]", "\n".join(diff)))
+    return changes
+
+
+def _gcode_diff_section(files, setting, diff):
+    # A fence longer than any backtick run in the G-code cannot be closed by it.
+    fence = "`" * max([3] + [len(run) + 1 for run in re.findall(r"`+", diff)])
+    # In <code>, the "@BBL" of a filament file name does not mention a GitHub user.
+    def code(text):
+        return f"<code>{html.escape(text, quote=False)}</code>"
+    names, listing = ", ".join(map(code, files)), ""
+    if len(files) > GCODE_DIFF_SUMMARY_FILES + 1:  # never "and 1 more"
+        listing = f"<p>{names}</p>\n\n"  # an HTML block, so markdown in names stays literal
+        names = (", ".join(map(code, files[:GCODE_DIFF_SUMMARY_FILES]))
+                 + f" and {len(files) - GCODE_DIFF_SUMMARY_FILES} more")
+    return (f"\n<details>\n<summary><b>{names} - {code(setting)} (click to expand)</b>"
+            f"</summary>\n\n{listing}{fence}diff\n{diff}\n{fence}\n\n</details>\n")
+
+
+def gcode_diff(profiles_dir, base, head=None, vendors=None):
+    """Markdown with one collapsed diff per changed G-code setting between base and
+    head, or "" when none changed. Files whose diff of a setting is identical share
+    one section. Cut to whole sections under GCODE_DIFF_BUDGET."""
+    pairs = [(old, new) for old, new in _changed_profiles(profiles_dir, base, head)
+             if not vendors or any(p and p.split("/")[0] in vendors for p in (old, new))]
+    specs = ([(base, old) for old, _ in pairs if old]
+             + [(head, new) for _, new in pairs if new and head])
+    blobs = _blobs_at(profiles_dir, specs) if specs else {}
+
+    def load(ref, rel):
+        if rel is None:
+            return {}
+        if ref:
+            return _parse_profile(blobs[(ref, rel)], rel, ref)
+        try:
+            return _parse_profile(Path(profiles_dir, rel).read_bytes(), rel, "the working tree")
+        except OSError as e:
+            print_warning(f"{rel}: skipped, cannot read it: {e}", file=sys.stderr)
+            return None
+
+    groups = {}  # (setting, diff) -> files, in the order git lists them
+    for old_rel, new_rel in pairs:
+        old, new = load(base, old_rel), load(head, new_rel)
+        if not isinstance(old, dict) or not isinstance(new, dict):
+            continue
+        for setting, diff in _text_changes(old, new):
+            groups.setdefault((setting, diff), []).append(new_rel or old_rel)
+    if not groups:
+        return ""
+
+    sections = [_gcode_diff_section(files, setting, diff)
+                for (setting, diff), files in groups.items()]
+    budget = GCODE_DIFF_BUDGET - len(GCODE_DIFF_HEADER.encode("utf-8"))
+    shown = 0
+    for section in sections:
+        budget -= len(section.encode("utf-8"))
+        if budget < 0:
+            break
+        shown += 1
+    note, hidden = "", len(sections) - shown
+    if hidden:
+        note = (f"\n{hidden} of {len(sections)} sections {'is' if hidden == 1 else 'are'} not "
+                "shown because the comment would be too long for GitHub. See the Files "
+                "changed tab for the rest.\n")
+    return GCODE_DIFF_HEADER + "".join(sections[:shown]) + note
+
+
+def _default_gcode_diff_base(profiles_dir, head):
+    for main in ("upstream/main", "origin/main"):
+        try:
+            return _git(profiles_dir, "merge-base", head or "HEAD", main).decode().strip()
+        except subprocess.CalledProcessError:
+            continue
+    raise RuntimeError("no --base given, and neither upstream/main nor origin/main exists")
+
+
+def run_gcode_diff(profiles_dir, vendors, base, head):
+    try:
+        markdown = gcode_diff(profiles_dir, base or _default_gcode_diff_base(profiles_dir, head),
+                              head, vendors)
+    # UnicodeDecodeError means git listed a file name that is not UTF-8.
+    except (OSError, RuntimeError, UnicodeDecodeError, subprocess.CalledProcessError) as e:
+        stderr = getattr(e, "stderr", None)
+        print_error(stderr.decode(errors="replace").strip() if stderr else str(e), file=sys.stderr)
+        return 1
+    sys.stdout.write(markdown)
+    return 0
+
+
 # ---------------------------------------------------------------------------
 # CLI
 # ---------------------------------------------------------------------------
@@ -3233,6 +3455,9 @@ examples:
   orca_profile_tool.py legacy-compat --base /tmp/v2.4.2/resources/profiles
       rewrite resources/info/legacy_compatible_printers.json against 2.4.2's
       profiles (git archive v2.4.2 resources/profiles | tar -x -C /tmp/v2.4.2)
+  orca_profile_tool.py gcode-diff > gcode.md
+      the changed custom G-code of the working tree since it left upstream/main,
+      as markdown with one collapsed diff per setting
 
 after adding, renaming or deleting profile files, run in this order:
   normalize -> update-index -> generate-id -> check
@@ -3387,6 +3612,25 @@ def build_parser():
     legacy_cmd.add_argument("--check", action="store_true",
                             help="fail if the map differs from what --base implies; write nothing")
 
+    gcode_cmd = add(
+        "gcode-diff", [vendor_opt, profiles_opt],
+        "print a readable markdown diff of changed custom G-code",
+        "Print, as markdown, a unified diff of every G-code or other multi-line\n"
+        "setting that differs between --base and --head in each changed profile\n"
+        "file, one collapsed section per setting. Files whose diff of a setting is\n"
+        "identical share a section. Trailing spaces are removed from every line, and\n"
+        "the output is cut to whole sections to fit a GitHub comment. Prints nothing\n"
+        "when no such setting changed. CI posts it on profile PRs.\n"
+        "\n"
+        "The settings are the *_gcode and multiline string options PrintConfig.cpp\n"
+        "defines, the options Tab.cpp edits as code (such as filename_format), and any\n"
+        "string value that spans several lines.")
+    gcode_cmd.add_argument("--base", metavar="REF",
+                           help="compare against this git ref (default: the merge base "
+                                "with upstream/main, else origin/main)")
+    gcode_cmd.add_argument("--head", metavar="REF",
+                           help="compare this git ref (default: the working tree)")
+
     return parser
 
 
@@ -3423,6 +3667,9 @@ def main(argv=None):
     if args.command == "legacy-compat":
         return run_legacy_compat(args.base, profiles_dir, args.output, args.check)
 
+    if args.command == "gcode-diff":
+        return run_gcode_diff(profiles_dir, vendors, args.base, args.head)
+
     if args.command == "fix-variant":
         _changed, errors = fix_variant_arrays(profiles_dir, vendors, dry_run=args.dry_run,
                                                strict=args.strict)

scripts/tests/test_profile_tool.py

@@ -1,7 +1,7 @@
 #!/usr/bin/env python3
 """Tests for the tree-maintenance half of scripts/orca_profile_tool.py: the
-normalize, trim, update-index, fix-variant and check commands, and the subcommand
-dispatch that reaches them (stdlib unittest, no external deps).
+normalize, trim, update-index, fix-variant, check and gcode-diff commands, and the
+subcommand dispatch that reaches them (stdlib unittest, no external deps).
 
 The id halves are covered by test_filament_id.py and test_setting_id.py.
 
@@ -14,9 +14,12 @@ import json
 import os
 import re
 import shutil
+import stat
+import subprocess
 import sys
 import tempfile
 import unittest
+from unittest import mock
 
 sys.path.insert(0, os.path.abspath(os.path.join(os.path.dirname(__file__), "..")))
 
@@ -41,7 +44,24 @@ class Tree:
         os.makedirs(self.profiles)
 
     def cleanup(self):
-        shutil.rmtree(self.dir, ignore_errors=True)
+        root = os.path.abspath(self.dir)
+
+        def writable_retry(func, path, _exc):
+            # Windows refuses to delete read-only files such as git's objects, and POSIX
+            # refuses to delete the entries of a read-only directory.
+            if not os.path.lexists(path):  # already removed, as on a second cleanup
+                return
+            parent = os.path.dirname(os.path.abspath(path))
+            try:
+                if os.path.commonpath([parent, root]) == root:  # never the temp dir itself
+                    os.chmod(parent, stat.S_IRWXU)
+                if not os.path.islink(path):  # chmod would follow it out of the tree
+                    os.chmod(path, stat.S_IRWXU)
+                func(path)
+            except (OSError, ValueError):  # commonpath raises ValueError across drives
+                pass
+        hook = "onexc" if sys.version_info >= (3, 12) else "onerror"
+        shutil.rmtree(self.dir, **{hook: writable_retry})
 
     def index_path(self, vendor):
         return os.path.join(self.profiles, vendor + ".json")
@@ -1409,6 +1429,292 @@ class TestDispatch(TreeCase):
         self.assertEqual(self.t.read("V", "filament/A.json")["type"], "filament")
 
 
+# ---------------------------------------------------------------------------
+# gcode-diff
+# ---------------------------------------------------------------------------
+
+@unittest.skipUnless(shutil.which("git"), "git not installed")
+class TestGcodeDiff(TreeCase):
+    START = "G28\nM104 S200\nG1 Z5"
+
+    def git(self, *args):
+        subprocess.run(["git", "-C", self.t.dir, "-c", "user.name=t", "-c", "user.email=t@t",
+                        "-c", "commit.gpgsign=false", *args], check=True, capture_output=True)
+
+    def printer(self, name, **extra):
+        self.t.write("V", f"machine/{name}.json", {"type": "machine", "name": name, **extra})
+
+    def commit(self):
+        self.git("add", "-A")
+        self.git("commit", "-q", "--allow-empty", "-m", "x")
+
+    @classmethod
+    def setUpClass(cls):
+        # git's list of the variables that tie a process to a repository, asked with no
+        # GIT_* set since a stray GIT_DIR fails the query.
+        clean = {k: v for k, v in os.environ.items() if not k.startswith("GIT_")}
+        cls.repo_env_vars = set(subprocess.run(
+            ["git", "rev-parse", "--local-env-vars"], env=clean, check=True,
+            capture_output=True, text=True).stdout.split())
+
+    def setUp(self):
+        super().setUp()
+        # A git hook's GIT_DIR or GIT_INDEX_FILE would point every git call here, the
+        # tool's included, at the real repository instead of the temp tree.
+        env = {k: v for k, v in os.environ.items() if k not in self.repo_env_vars}
+        patcher = mock.patch.dict(os.environ, env, clear=True)
+        patcher.start()
+        self.addCleanup(patcher.stop)
+        self.git("init", "-q")
+        for name in ("A", "B", "C"):
+            self.printer(name, machine_start_gcode=self.START, nozzle_diameter=["0.4"])
+        self.printer("Gone", machine_end_gcode="M84")
+        self.commit()
+
+    def diff(self):
+        rc, out = self.run_command("gcode-diff", "--base", "HEAD")
+        self.assertEqual(rc, 0, out)
+        return out
+
+    def test_identical_edits_share_one_section(self):
+        for name in ("A", "B"):
+            self.printer(name, machine_start_gcode="G28\nM104 S210  \nG1 Z5")
+        self.printer("C", machine_start_gcode="G28\nM104 S220\nG1 Z5")
+        out = self.diff()
+        self.assertEqual(out.count("<details>"), 2)
+        self.assertIn("<code>V/machine/A.json</code>, <code>V/machine/B.json</code> - "
+                      "<code>machine_start_gcode</code>", out)
+        self.assertIn("<code>V/machine/C.json</code> - <code>machine_start_gcode</code>", out)
+        # Trailing spaces are removed.
+        self.assertIn("\n-M104 S200\n+M104 S210\n", out)
+        self.assertIn("\n\n```diff\n@@ ", out)
+        self.assertIn("\n```\n\n</details>", out)
+
+    def test_nothing_is_printed_without_a_text_change(self):
+        self.printer("A", machine_start_gcode=self.START, nozzle_diameter=["0.6"])
+        self.assertEqual(self.diff(), "")
+
+    def test_added_and_deleted_files_show_the_whole_value(self):
+        # An untracked file counts as added; the validator's user dir is not a profile.
+        self.printer("New", machine_start_gcode="G28\nG29")
+        self.t.write("user", "default/machine/U.json", {"machine_start_gcode": "G28"})
+        os.remove(self.t.path("V", "machine/Gone.json"))
+        out = self.diff()
+        self.assertIn("@@ -0,0 +1,2 @@\n+G28\n+G29\n", out)
+        self.assertIn("<code>V/machine/Gone.json</code> - <code>machine_end_gcode</code>", out)
+        self.assertIn("@@ -1 +0,0 @@\n-M84\n", out)
+        self.assertNotIn("U.json", out)
+
+    def test_a_multi_line_value_counts_whatever_its_key(self):
+        self.printer("A", machine_start_gcode=self.START, custom_note="one\ntwo")
+        self.assertIn("<code>V/machine/A.json</code> - <code>custom_note</code>", self.diff())
+
+    def test_a_file_name_cannot_mention_a_user(self):
+        self.t.write("V", "filament/PLA @BBL A1.json", {"filament_start_gcode": ["M106"]})
+        self.assertIn("<code>V/filament/PLA @BBL A1.json</code>", self.diff())
+
+    def test_head_compares_two_commits(self):
+        self.printer("A", machine_start_gcode="G28")
+        self.commit()
+        rc, out = self.run_command("gcode-diff", "--base", "HEAD~1", "--head", "HEAD")
+        self.assertEqual(rc, 0, out)
+        self.assertIn("<code>V/machine/A.json</code> - <code>machine_start_gcode</code>", out)
+
+    def test_a_renamed_file_diffs_against_its_old_self(self):
+        os.rename(self.t.path("V", "machine/A.json"), self.t.path("V", "machine/A2.json"))
+        self.printer("A2", machine_start_gcode="G28\nM104 S210\nG1 Z5", nozzle_diameter=["0.4"])
+        self.commit()
+        rc, out = self.run_command("gcode-diff", "--base", "HEAD~1", "--head", "HEAD")
+        self.assertEqual(rc, 0, out)
+        self.assertIn("<code>V/machine/A2.json</code> - <code>machine_start_gcode</code>", out)
+        self.assertIn("\n G28\n-M104 S200\n+M104 S210\n G1 Z5\n", out)
+
+    def test_a_file_renamed_off_json_loses_its_values(self):
+        os.rename(self.t.path("V", "machine/Gone.json"), self.t.path("V", "machine/Gone.json.bak"))
+        self.commit()
+        rc, out = self.run_command("gcode-diff", "--base", "HEAD~1", "--head", "HEAD")
+        self.assertEqual(rc, 0, out)
+        self.assertIn("<code>V/machine/Gone.json</code> - <code>machine_end_gcode</code>", out)
+        self.assertIn("@@ -1 +0,0 @@\n-M84\n", out)
+
+    def test_a_file_renamed_onto_json_is_new(self):
+        with open(self.t.path("V", "machine/Draft.txt"), "w", encoding="utf-8") as f:
+            json.dump({"type": "machine", "machine_start_gcode": self.START}, f)
+        self.commit()
+        os.rename(self.t.path("V", "machine/Draft.txt"), self.t.path("V", "machine/Draft.json"))
+        self.commit()
+        rc, out = self.run_command("gcode-diff", "--base", "HEAD~1", "--head", "HEAD")
+        self.assertEqual(rc, 0, out)
+        self.assertIn("@@ -0,0 +1,3 @@\n+G28\n+M104 S200\n+G1 Z5\n", out)
+
+    def test_a_batch_read_survives_paths_that_are_not_files(self):
+        blobs = apt._blobs_at(self.t.profiles, [("HEAD", "V/machine"), ("HEAD", "V/no such.json"),
+                                                ("HEAD", "V/machine/Gone.json")])
+        self.assertIsNone(blobs[("HEAD", "V/machine")])
+        self.assertIsNone(blobs[("HEAD", "V/no such.json")])
+        self.assertEqual(json.loads(blobs[("HEAD", "V/machine/Gone.json")])["machine_end_gcode"],
+                         "M84")
+
+    def test_each_value_of_a_vector_option_is_its_own_setting(self):
+        self.t.write("V", "filament/F.json", {"filament_start_gcode": ["M106", "M107"]})
+        self.commit()
+        self.t.write("V", "filament/F.json", {"filament_start_gcode": ["M106", "M106 S0"]})
+        out = self.diff()
+        self.assertEqual(out.count("<details>"), 1)
+        self.assertIn("<code>filament_start_gcode[1]</code>", out)
+
+    def test_vendor_limits_the_files(self):
+        self.printer("A", machine_start_gcode="G28")
+        self.t.write("W", "machine/X.json", {"machine_start_gcode": "G28"})
+        rc, out = self.run_command("gcode-diff", "--base", "HEAD", "--vendor", "V")
+        self.assertEqual(rc, 0, out)
+        self.assertIn("V/machine/A.json", out)
+        self.assertNotIn("W/machine/X.json", out)
+
+    def test_vendor_includes_files_moved_out_of_it(self):
+        self.t.add_vendor("W")
+        os.rename(self.t.path("V", "machine/A.json"), self.t.path("W", "machine/A.json"))
+        data = self.t.read("W", "machine/A.json")
+        self.t.write("W", "machine/A.json", {**data, "machine_start_gcode": "G28\nM104 S210\nG1 Z5"})
+        self.commit()
+        rc, out = self.run_command("gcode-diff", "--base", "HEAD~1", "--head", "HEAD",
+                                   "--vendor", "V")
+        self.assertEqual(rc, 0, out)
+        self.assertIn("<code>W/machine/A.json</code> - <code>machine_start_gcode</code>", out)
+
+    def same_edit(self, names):
+        """The diff after one start G-code edit to each of names; returns (summary, output)."""
+        for name in names:
+            self.printer(name, machine_start_gcode=self.START, nozzle_diameter=["0.4"])
+        self.commit()
+        for name in names:
+            self.printer(name, machine_start_gcode="G28")
+        out = self.diff()
+        return re.search(r"<summary>(.*)</summary>", out).group(1), out
+
+    def test_a_long_file_list_moves_into_the_section(self):
+        summary, out = self.same_edit("ABCDE")
+        self.assertIn("<code>V/machine/C.json</code> and 2 more - ", summary)
+        self.assertNotIn("D.json", summary)
+        self.assertIn("<code>V/machine/D.json</code>, <code>V/machine/E.json</code></p>\n\n```diff",
+                      out)
+
+    def test_four_files_are_all_named_in_the_summary(self):
+        summary, _out = self.same_edit("ABCD")
+        self.assertIn("<code>V/machine/D.json</code> - ", summary)
+        self.assertNotIn("more", summary)
+
+    def test_an_error_goes_to_stderr_only(self):
+        err = io.StringIO()
+        with contextlib.redirect_stderr(err):
+            rc, out = self.run_command("gcode-diff", "--base", "no-such-ref")
+        self.assertEqual(rc, 1)
+        self.assertEqual(out, "")
+        self.assertIn("no-such-ref", err.getvalue())
+
+    def test_a_file_name_that_is_not_utf8_is_an_error(self):
+        bad = UnicodeDecodeError("utf-8", b"\xe9.json", 0, 1, "invalid continuation byte")
+        err = io.StringIO()
+        with mock.patch.object(apt, "_changed_profiles", side_effect=bad), \
+                contextlib.redirect_stderr(err):
+            rc, out = self.run_command("gcode-diff", "--base", "HEAD")
+        self.assertEqual((rc, out), (1, ""))
+        self.assertIn("invalid continuation byte", err.getvalue())
+
+    def test_output_is_cut_to_whole_sections(self):
+        for name in ("A", "B", "C"):
+            self.printer(name, machine_start_gcode=name * 300)
+        size = len(apt.gcode_diff(self.t.profiles, "HEAD").encode("utf-8"))
+        with mock.patch.object(apt, "GCODE_DIFF_BUDGET", size - 1):
+            out = self.diff()
+        self.assertEqual(out.count("<details>"), 2)
+        self.assertEqual(out.count("</details>"), 2)
+        self.assertIn("\n1 of 3 sections is not shown", out)
+        with mock.patch.object(apt, "GCODE_DIFF_BUDGET", 1):
+            self.assertIn("\n3 of 3 sections are not shown", self.diff())
+
+    def test_cleanup_removes_the_repo(self):
+        # setUp's commit leaves read-only git objects, and a read-only directory blocks
+        # deletion on POSIX.
+        os.chmod(self.t.path("V", "machine"), stat.S_IRUSR | stat.S_IXUSR)
+        self.t.cleanup()
+        self.assertFalse(os.path.exists(self.t.dir))
+        with mock.patch.object(os, "chmod") as chmod:
+            self.t.cleanup()  # a second cleanup, as addCleanup runs, must not touch the temp dir
+        chmod.assert_not_called()
+
+    def test_only_repository_variables_are_stripped(self):
+        self.assertTrue({"GIT_DIR", "GIT_WORK_TREE", "GIT_INDEX_FILE"} <= self.repo_env_vars)
+        self.assertFalse({"GIT_SSH", "GIT_EXEC_PATH", "GIT_EDITOR"} & self.repo_env_vars)
+
+    def test_cleanup_leaves_symlink_targets_alone(self):
+        outside = tempfile.mkdtemp(prefix="profile_tool_outside_")
+        self.addCleanup(shutil.rmtree, outside, True)
+        target = os.path.join(outside, "f")
+        open(target, "w").close()
+        os.chmod(target, stat.S_IRUSR)
+        self.addCleanup(os.chmod, target, stat.S_IRWXU)  # runs before the rmtree above
+        machine = self.t.path("V", "machine")
+        try:
+            os.symlink(target, os.path.join(machine, "link"))
+        except (OSError, NotImplementedError):
+            self.skipTest("cannot create symlinks here")
+        os.chmod(machine, stat.S_IRUSR | stat.S_IXUSR)  # so removing the link fails at first
+        self.t.cleanup()
+        self.assertFalse(os.path.exists(self.t.dir))
+        self.assertEqual(stat.S_IMODE(os.stat(target).st_mode) & stat.S_IWUSR, 0)
+
+    def test_a_git_hook_environment_is_ignored(self):
+        scripts = os.path.join(REPO_ROOT, "scripts")
+        result = subprocess.run(
+            [sys.executable, "-m", "unittest",
+             "tests.test_profile_tool.TestGcodeDiff.test_head_compares_two_commits"],
+            cwd=scripts, capture_output=True, text=True,
+            env={**os.environ, "GIT_DIR": os.path.join(self.t.dir, "nowhere")})
+        self.assertEqual(result.returncode, 0, result.stderr)
+
+    def test_the_options_are_read_from_the_engine(self):
+        keys = apt._text_option_keys()
+        self.assertTrue({"machine_start_gcode", "filament_start_gcode", "printing_by_object_gcode",
+                         "notes", "post_process"} <= keys)
+        self.assertNotIn("emit_machine_limits_to_gcode", keys)  # a coBool
+
+    START_DEF = 'def = this->add("machine_start_gcode", coString);\n'
+
+    def keys_from(self, print_config, tab=None):
+        """_text_option_keys read from these sources; no tab means no Tab.cpp."""
+        paths = [os.path.join(self.t.dir, "PrintConfig.cpp"), os.path.join(self.t.dir, "Tab.cpp")]
+        for path, text in zip(paths, (print_config, tab)):
+            if text is not None:
+                with open(path, "w", encoding="utf-8") as f:
+                    f.write(text)
+        apt._text_option_keys.cache_clear()
+        self.addCleanup(apt._text_option_keys.cache_clear)
+        with mock.patch.object(apt, "PRINT_CONFIG_CPP", paths[0]), \
+                mock.patch.object(apt, "TAB_CPP", paths[1]):
+            return apt._text_option_keys()
+
+    def test_multiline_is_read_whatever_its_spacing(self):
+        keys = self.keys_from(self.START_DEF + 'def = this->add("printer_notes", coString);\n'
+                                               '    def->multiline  = true;\n')
+        self.assertIn("printer_notes", keys)
+
+    def test_the_code_options_of_tab_cpp_are_read(self):
+        keys = self.keys_from(self.START_DEF, 'option = optgroup->get_option("filename_format");\n'
+                                              'option.opt.is_code = true;\n'
+                                              'option = optgroup->get_option("layer_height");\n')
+        self.assertIn("filename_format", keys)
+        self.assertNotIn("layer_height", keys)
+
+    def test_a_missing_tab_cpp_is_not_an_error(self):
+        self.assertIn("machine_start_gcode", self.keys_from(self.START_DEF))
+
+    def test_markdown_in_a_file_name_stays_literal(self):
+        section = apt._gcode_diff_section(["V/a *b*.json", "V/c.json", "V/d.json", "V/e.json",
+                                           "V/f.json"], "machine_start_gcode", "@@ -1 +1 @@")
+        self.assertIn("\n<p><code>V/a *b*.json</code>, ", section)
+
+
 # ---------------------------------------------------------------------------
 # the real tree
 # ---------------------------------------------------------------------------

src/OrcaSlicer.cpp

@@ -163,6 +163,7 @@ using json = nlohmann::json;
 #include <X11/Xlib.h>
 #endif
 #include <unistd.h>
+#include "slic3r/GUI/Widgets/WebView.hpp"
 #endif
 
 #ifdef SLIC3R_GUI
@@ -1125,6 +1126,19 @@ static void load_downward_settings_list_from_config(std::string config_file, std
     }
 }
 
+#ifdef __WXGTK__
+// Virtual GPUs (VirtualBox, VMware, QEMU) cannot back WebKit's hardware DMABUF renderer.
+static bool is_hypervisor_guest()
+{
+    std::ifstream cpuinfo("/proc/cpuinfo");
+    std::string line;
+    while (std::getline(cpuinfo, line))
+        if (boost::starts_with(line, "flags"))
+            return line.find(" hypervisor") != std::string::npos;
+    return false;
+}
+#endif
+
 int CLI::run(int argc, char **argv)
 {
     // Mark the main thread for the debugger and for runtime checks.
@@ -1156,8 +1170,10 @@ int CLI::run(int argc, char **argv)
     // opt-in path. The ~2020-era WebKit2GTK XWayland compositor bug it
     // worked around appears fixed in WebKit2GTK >= 2.42; leaving it
     // unset preserves WebKit hardware acceleration on Device / Setup
-    // Wizard / login / store. The default path still applies it on
-    // XWayland sessions as a conservative fallback for older WebKit.
+    // Wizard / login / store. The default path applies it only where it
+    // forces GDK_BACKEND=x11 below (a build without EGL, so the app really
+    // runs through XWayland), and only when the linked WebKitGTK predates
+    // the fix (< 2.42), as a conservative fallback for older WebKit.
     // ------------------------------------------------------------------
     {
         const char* gdk_backend = ::getenv("GDK_BACKEND");
@@ -1165,6 +1181,17 @@ int CLI::run(int argc, char **argv)
         // honours the first backend in the comma-separated list).
         const bool x11_opt_in = gdk_backend && boost::starts_with(gdk_backend, "x11");
 
+        // NVIDIA's proprietary driver cannot back WebKitGTK's DMABUF renderer.
+        // Force the shared-memory transport, which keeps compositing and threaded
+        // scrolling; the second variable clears Debian/Ubuntu/openSUSE's isNVIDIA().
+        if (::access("/proc/driver/nvidia/version", F_OK) == 0 && WebView::SupportsForceSharedMemory()) {
+            ::setenv("WEBKIT_DMABUF_RENDERER_FORCE_SHM", "1", /* replace */ false);
+            ::setenv("WEBKIT_FORCE_DMABUF_RENDERER", "1", /* replace */ false);
+        }
+
+        if (is_hypervisor_guest() && WebView::SupportsForceSharedMemory())
+            ::setenv("WEBKIT_DMABUF_RENDERER_FORCE_SHM", "1", /* replace */ false);
+
         if (x11_opt_in) {
             // ===== X11 / XWayland (opted in via GDK_BACKEND=x11) =====
             BOOST_LOG_TRIVIAL(info) << "GDK_BACKEND=x11 detected; applying v2.3.2 X11/XWayland workarounds.";
@@ -1204,23 +1231,18 @@ int CLI::run(int argc, char **argv)
                 if (wayland_env && *wayland_env) {
                     BOOST_LOG_TRIVIAL(warning) << "Wayland detected but wxWidgets has no EGL support (wxHAS_EGL is OFF). Forcing X11 backend.";
                     ::setenv("GDK_BACKEND", "x11", true);
+
+                    // GTK will use X11 in a Wayland session here, which is the
+                    // one default-path case that really runs through XWayland.
+                    // WebKit2GTK accelerated compositing could fail silently
+                    // there on releases before 2.42, so force it off. Disabling
+                    // it also turns off threaded scrolling, hence the gate.
+                    if (WebView::NeedsCompositingWorkaround())
+                        ::setenv("WEBKIT_DISABLE_COMPOSITING_MODE", "1", /* replace */ false);
                 }
             }
             #endif
 
-            // WebKit2GTK compositing can fail under XWayland on older
-            // WebKit releases. Disable it only when both DISPLAY and
-            // WAYLAND_DISPLAY are set (i.e. an XWayland session is in
-            // use). On pure X11 or native Wayland, compositing is left
-            // enabled so WebKit retains HW acceleration.
-            {
-                const char* display_env_wk = ::getenv("DISPLAY");
-                const char* wayland_env_wk = ::getenv("WAYLAND_DISPLAY");
-                if (display_env_wk && *display_env_wk && wayland_env_wk && *wayland_env_wk) {
-                    ::setenv("WEBKIT_DISABLE_COMPOSITING_MODE", "1", /* replace */ false);
-                }
-            }
-
             // XInitThreads is needed before GStreamer may use Xlib. On
             // native Wayland without DISPLAY, GStreamer uses waylandsink
             // (no Xlib involved), so the call is skipped.

src/dev-utils/platform/unix/build_linux_image.sh.in

@@ -429,7 +429,8 @@ if [ "\$XDG_SESSION_TYPE" = "wayland" ] && [ "\$ZINK_DISABLE_OVERRIDE" != "1" ];
                 export __EGL_VENDOR_LIBRARY_FILENAMES=/usr/share/glvnd/egl_vendor.d/50_mesa.json
                 export MESA_LOADER_DRIVER_OVERRIDE=zink
                 export GALLIUM_DRIVER=zink
-                export WEBKIT_DISABLE_DMABUF_RENDERER=1
+                # WebKit's NVIDIA DMABUF workaround is applied by the binary itself,
+                # gated on the runtime WebKitGTK version (src/OrcaSlicer.cpp).
             fi
         fi
     fi

src/libslic3r/Arachne/WallToolPaths.cpp

@@ -812,7 +812,8 @@ bool WallToolPaths::removeEmptyToolPaths(std::vector<VariableWidthLines> &toolpa
      * Get the order constraints of the insets when printing walls per region / hole.
      * Each returned pair consists of adjacent wall lines where the left has an inset_idx one lower than the right.
      *
-     * Odd walls should always go after their enclosing wall polygons.
+     * Odd walls follow the same order as even ones, so that the centre line of a narrow wall is an inner wall
+     * like any other when printing inner to outer.
      *
      * \param outer_to_inner Whether the wall polygons with a lower inset_idx should go before those with a higher one.
  */
@@ -886,12 +887,7 @@ WallToolPaths::ExtrusionLineSet WallToolPaths::getRegionOrder(const std::vector<
                 continue; // not directly adjacent
             if (!shorter_then(loc_here - lineloc_nearby.j.p, (lineloc_here.j.w + lineloc_nearby.j.w) / 2 * diagonal_extension))
                 continue; // points are too far away from each other
-            if (here->is_odd || nearby->is_odd) {
-                if (here->is_odd && !nearby->is_odd && nearby->inset_idx < here->inset_idx)
-                    order_requirements.emplace(std::make_pair(nearby, here));
-                if (nearby->is_odd && !here->is_odd && here->inset_idx < nearby->inset_idx)
-                    order_requirements.emplace(std::make_pair(here, nearby));
-            } else if ((nearby->inset_idx < here->inset_idx) == outer_to_inner) {
+            if ((nearby->inset_idx < here->inset_idx) == outer_to_inner) {
                 order_requirements.emplace(std::make_pair(nearby, here));
             } else {
                 assert((nearby->inset_idx > here->inset_idx) == outer_to_inner);