* Reorder max volumetric speed calibration step
Moved the max volumetric speed calibration step after temperature tower in the documentation and updated the calibration menu initialization in MainFrame.cpp to match the new order.
* Update wiki image
* Reorder flow rate and pressure advance calibration steps
Updated documentation and GUI to list Pressure Advance calibration before Flow Rate calibration, reflecting the recommended calibration order. Adjusted menu item order in MainFrame.cpp and updated related documentation and image.
Because total print time is typically a big floating point number and the time of trapezoid is typically a small number, summing those numbers leads to a loss in precision. Switching to doubles reduces the loss of precision.
(cherry picked from commit c5982f40196c178bd824c556ac11e8c6f67d5e7a)
* The 0.30mm layer height configuration for the 0.4 nozzle of the QIDI model has been removed
* Merge branch 'main' into main
* Merge branch 'SoftFever:main' into main
* Revert "The 0.30mm layer height configuration for the 0.4 nozzle of the QIDI model has been removed"
This reverts commit 8d296720b8.
* Update Qidi Q2 0.4 nozzle.json
修改Q2打印高度
* Merge branch 'SoftFever:main' into main
* Merge branch 'SoftFever:main' into main
* change machine_gcode
* Merge branch 'main' of https://github.com/HYzd766/OrcaSlicer
* Merge branch 'SoftFever:main' into main
* Multi-color code compatible with QIDI models
* Merge branch 'main' into main
* toggle axis visibility on canvas (#9666)
* toggle axis visibility on canvas
* set show_axes config on toggle
* fix: Add pause and filament change to machine gcodes for Sovol SV08 MAX (#11214)
* Add fixed Ironing Angle setting for uniform surface finish (#11195)
* Initial working fixed ironing angle implemented with new Fixed ironing angle setting
* update documentation
* Combine Fill.is_using_template_angle and Fill.alternate_fill_direction into Fill.fixed_angle
* Rename SurfaceFillParams.is_using_template_angle to SurfaceFillParam.fixed_angle.
* Initial working fixed ironing angle implemented with new Fixed ironing angle setting
* update documentation
* Combine Fill.is_using_template_angle and Fill.alternate_fill_direction into Fill.fixed_angle
* Rename SurfaceFillParams.is_using_template_angle to SurfaceFillParam.fixed_angle.
* Actually build tests on Linux and allow RelWithDebInfo
They weren't being built.
Also cleaned up --config flags which enables RelWithDebInfo on Linux,
now that Ninja Multi-Config is used, it's quite trivial.
* Remove obsolete Slic3r Perl tests
The directory doesn't exist, they're already gone.
* Add GH job for running unit tests
* Move unit test execution to script and upload test results
* Don't run scheduled builds on forks
* Only deploy from SoftFever/OrcaSlicer
Will stop failures on forks
* Use artifact instead of cache
* Tweak archive and checkout paths
Keep getting error:
```
/home/runner/work/_temp/902d0a0a-6d23-4fe0-a643-8b5cc4efd25b.sh: line 1: scripts/run_unit_tests.sh: Permission denied
```
That seems to be because I didn't use actions/checkout, the working
directory is never setup correctly? So using checkout to get scripts
directory. Unsure if archive will preserve the `build/tests/` prefix;
will find out soon.
* Use tar to package directory and write results to correct directory
Tar preserves filenames and directory structure
* Use tar -xvf not -xzf
Muscle memory failed me
* Add testing wiki page
* Save test logs on failure and choose correct directory for junit
* Consolidate apt install steps, use for unit tests too, disable non-Linux builds
Temporarily disable non-Linux builds to save time while developing
this.
Cache the apt packages to save some time searching apt and downloading
them again (though I realize this is also downloading, but hopefully
by something closer and faster).
Remove all the redundant packages listed in the workflow and debian
distribution lists.
* Remove apt install steps from workflow
`./build-linux.sh -u` is supposed to install all needed packages, so
it should build without needing anything besides that. If I'm wrong
this commit will be dropped.
* Need composite action checked out locally
* Re-enable non-Linux builds now that it's working
* Skip a deploy and a notarize in forks
They only succeed in the main repo.
* Fix multi-build for non-Release builds: share CONFIG
* Correct build errors in unit tests
Indeterminate method signatures resolved. Updated script to build all
the tests.
* Fix -g vs -e for RelWithDebInfo
* Change CONFIG->BUILD_CONFIG
Missed one in prior commits
* Reduce wasteful redundant build artifact copies
1. Don't copy the artifacts and leave them; make a hard link first;
only make a copy only while creating AppImage.
2. Don't tar up the `package` directory; nothing uses this tar AFAICT
* Fix directory name
* Change jigsaw auth test URLs to httpbin.org
No idea why the basic auth doesn't work, but it doesn't work for
`curl` CLI either. This does.
* Remove force-build
It got reverted at
https://github.com/SoftFever/OrcaSlicer/commit/e3f049829bff3ac4de9fd271768948efc150e4c3
for unknown reasons.
* Add timeout for unit tests in GitHub Actions workflow (#11146)
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Add option to allow upload to SD-Cards marked as abnormal, also add better error description
+ Adds the options under the Network Settings to allow upload to abnormal SD-Card.
+ If not enabled user will now see why the upload is stuck at 10% depending on the sd_card_state (Readonly/Abnormal)
* Merging with current branch, and updateing "sd-card" to "storage"
* Generate localization and also change remaining sd_card_abnormal states to _storage_abnormal
* Fix issues from merge, and other bugfixes.
* Regenerate localization files.
* Improve Missing Storage Message, Add skip for abnormal storage in printer select dialog
Ioannis Giannakas