Regenerate the template after rebasing onto main, which brought the 14
strings of the object Align/Distribute menu (#13373), and translate
them in all 22 catalogs. Each language reuses its catalog's existing
"align" wording, with one consistent pattern for the edge, center and
distribute items. Entries whose wording needs a native speaker's check
carry review notes.
- Minimize wall height angle acts on slopes steeper than the angle, not
shallower (ContourZ.cpp).
- The wipe tower's default wall type is Rib, not Rectangle; extra flow
for purging can't make lines narrower (minimum 100%); the max purge
speed caps the sparse infill speed on sparse layers and also the outer
walls.
- Interlocking depth is no longer ignored without a maximum width: every
other layer is cut to that depth unless beam interlocking is on.
- Draft shield: skirts are placed around brims now, so the note about
intersecting brims is removed.
- Infill/wall overlap percentages are relative to the inner wall line
width, not the sparse infill width.
- Bridge line width 0 uses the nozzle diameter for thick bridges.
- Fully overhanging walls use the 75% overhang speed limited by the
bridge speed; there is no 100% speed. The bridge speed tooltip no
longer mentions the removed classic overhang mode.
- First layer speed covers walls and brim; everything else uses first
layer infill speed.
- Inner/Outer/Inner is recommended over Outer/Inner, not against it.
- Minimum wall length is a multiple of the wall width, not mm, and One
wall threshold is in the Walls and surfaces group.
- Small perimeter speeds can't be set to zero (min 1), so "Set to zero
for auto" is removed.
- Label typo: Role based wipe speed.
The translation template is regenerated; it also picks up strings that
other recent changes added without regenerating it.
* Precise Seam: new full-coverage policy for Seam Blocked
A Seam Blocked modifier that covers a whole perimeter now blocks it, like a
perimeter painted red all round, instead of being skipped. It overrides
painting and lower-priority modifiers, like Enforced and Neutral. A new
warning names the modifier: "Seam Blocked modifier "<name>" of "<object>"
covers an entire perimeter". It is shown only when a perimeter stays
entirely Blocked after all weak modifiers. The full-containment warning now
covers only Center, Left and Right.
* Precise Seam: fix seams on perimeters blocked all round
- SeamComparator::is_first_not_much_worse() compares the types first, so two
Blocked candidates fall through like Neutral ones. On a perimeter blocked
all round, by a whole Seam Blocked modifier or by red painting, Random put
the seam on the closing vertex of every layer and Aligned stopped aligning.
- The whole-perimeter Blocked warning flags only the highest whole zone, the
one in effect. A lower whole zone it overwrites is no longer reported, and
the candidate scan runs only when that zone is Blocked.
- The warning msgids take the type name from the menu's "Seam Blocked" msgid.
- PreciseSeamWarnings::set() shares the load-before-store idiom, and every
weak segment records its modifier.
- Tests: a whole Blocked perimeter gets the seams of an unmarked one under
every seam position; overwritten whole Blocked zones are not reported.
---------
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
* Add orca-translations Claude skill and PO tool
Add a .claude skill that guides translation passes over the localization/i18n gettext catalogs. It covers the workflow: run gettext, settle new glossary terms, translate in batches, verify, and report.
Includes translation-rules.md, which condenses the placeholder, line-break and glossary rules plus the guidance on review notes.
Also adds scripts/po_tool.py (standard library only). It lists pending entries with glossary hints, validates and applies translations, adding '# AI Translated' and '# Needs human review' comments, and rewrites only the entries it changes. It can also check catalogs, look up existing translations, suggest glossary candidates and update the wiki glossary TSV.
* Let po_tool apply translations by entry id
pending now gives each entry a short id, so a translation file can name
entries by id instead of repeating the English msgid. apply accepts either.
A "review": "" item clears an earlier review note when overwriting an
entry, and check gives each msgfmt run its own temporary output file so
parallel checks do not collide.
* Fill all empty translations
Regenerate the template with run_gettext --full and translate every empty
entry in the 22 catalogs (7,089 entries) with the orca-translations skill,
following the localization glossary, including the new belt printer,
IDEX/IQEX and plugin terms. Every new entry is marked "# AI Translated";
122 also carry "# Needs human review" with what to check.
* Show entry ids in po_tool lookup and search translations
lookup now prints each entry's id, so an entry found there can be
rewritten with apply --overwrite without repeating the English, and
--msgstr searches the translations instead of the msgids, which finds
every entry that still uses a term being changed.
SKILL.md describes how to change an established term: check the
catalog's usage first, update the glossary cell, then rewrite only the
entries where the term has that meaning.
* Fix mistranslated terms and align catalogs with the glossary
Correct labels that the glossary had copied, and the entries that used
them:
- ca: Raft was rendered as the Brim term; it is now "Rai". Exhaust fan,
Monotonic line, Unretract, Slice, Lateral Honeycomb and PA Tower
labels fixed.
- cs: Lightning infill is "Blesk", not "Osvětlení" (illumination).
- sv: Retraction is "Retraktion", not "Reduktion"; Unretract,
Lagerhöjd, Delkylningsfläkt, Utsugsfläkt, Aligned Rectilinear and the
Preset label fixed.
- de: Brim is "Rand" and Skirt is "Umrandung", as most entries already
had them.
- lt: brim entries used the Skirt word "apvadas"; they now use "kraštas".
- es: Sparse infill is "relleno de baja densidad", the catalog majority.
- eu: nozzle wipe is "garbiketa", not purge.
- th: the project plate is "เพลต", distinct from the bed.
- uk: Quarter Cubic, Latin "PA" in PA Tower, and Belt purge tower.
- pl: Cross Hatch, Tri-hexagon, Volumetric speed and Raft labels.
- zh_TW: Brim stays "Brim", as the existing labels have it.
- tr: "Prime Tower" read "Prime Minister Tower".
- ko: the plugin "Capabilities" label read "performance".
- Build Volume labels fixed in tr, de, cs and eu.
All 242 rewritten entries are marked "# AI Translated".
* Make more UI text translatable and fix pluralization and context
Audit the sources for text that translators could not translate
correctly and fix it.
Mark text that reached users in English only: IDEX/IQEX role names,
plugin permission prompts and errors, 3MF/preset loading errors, G-code
placeholder parser errors, calibration and device messages, notification
texts, file dialog filters, and the config validation messages.
Replace sentences built from translated fragments, such as the prime
tower warnings, "left"/"right" nozzle names, and "Filament " + number,
with single msgids that have placeholders, so translators can reorder
and inflect them.
Use plural forms for texts with a count ("%1% mixed filaments",
"%d objects", "%1% triangles") instead of "(s)" and mismatched verbs.
Fix the swapped singular/plural pair in "The following presets inherit
this preset".
Add translation contexts where one English word has several meanings
(Subscribed/Local, Standard, Pause, View, Step, Model, Camera, Flow,
Filter, Others, Prepare, the Design tools). Show "Size" instead of
"Build Volume" in the Cut tool, which displays the object size.
Fix code that compared translated text with English (the Edit G-code
dialog group, the plugin registration failure check), and add the
bundled web pages' missing string-table entries. Use the single
character for degrees Celsius, say "G-code", and describe the head
filament map without internal jargon.
Install the libslic3r translate callback before the presets load, so
their load errors are translated, and list the 28 source files that had
marked strings but were never extracted into localization/i18n/list.txt.
* Suggest earlier translations and list fuzzy entries in po_tool pending
pending now attaches the closest earlier translation of a similar
English text (from obsolete or translated entries), so a reworded or
split string keeps its wording, and it lists fuzzy entries by default,
since users never see them. A fuzzy entry also carries its stale
translation as previous_translation.
* Fix wording of the non-boolean operands error
The logical operation error said "operators" where it means the
operands the operation was applied to.
* Translate the newly translatable strings in all languages
Regenerate the template after the translatability changes and fill every
new or changed entry in the 22 catalogs (about 12,800 entries): the
strings that became translatable, the plural forms, the entries split by
context, and the previously fuzzy singular entries that became plurals.
Every new entry is marked "# AI Translated", and about 360 also carry a
"# Needs human review" note saying what to check. Terms follow the
localization glossary. Earlier translations of reworded strings were
reused where the meaning was unchanged. Existing entries were not
changed, and obsolete entries are kept.
* Document the source translatability audit in the orca-translations skill
Add a reference describing how strings reach translators, what to look
for (untranslated text, spliced sentences, missing plurals, ambiguous
words), what not to translate, where a context cannot be carried, and
what to do after the edits, plus a scanner that lists untranslated
user-facing string literals.
* Document how to write translatable strings in AGENTS.md
Tell developers to keep each message complete in one msgid: use
placeholders instead of concatenating translated fragments, plural forms
for counts, and contexts for ambiguous words, and to list new source
files in localization/i18n/list.txt. Add a matching code review item.
* Translate the strings added since the rebase
Regenerate the template against the current main and translate the 26
new entries per language: the Fix Model commands and messages, and the
texture displacement image adjustment panel. Each new entry is marked
"# AI Translated"; existing entries are unchanged.
* tidy
* Add Ultimaker S5 Profile - WIP
* Add Ultimaker physical printer base
* Ultimaker API WIP for base update.
* Fix undefined reference error.
* Add UMS5 profile, add placeholders for testAuth stuff.
* Fix non-const func definitions, make func names align with style guide.
* Localization stuff? IDK if this does anything or is required.
* Add cover image
* Auth code cleanup, add UI button for auth cred generation, implement various auth checks and tests.
* Fix auth stuff
* Clean up code
* Get upload code sort-of working, fix typo
* Update printer settings and start/end gcodes
* Add makeGriffinCompatible preprocessor script to prevent machine crash, update machine profile.
* Fix buildplate size, fix time missing bug, add S5 buildplate model
* Correct capitalization to UltiMaker
* Fix display bug, fix capitalization bug
* Implement credential generation button and logic
* Fix generate auth creds button, add todos, fix capitalization.
* Actually fix generate auth credentials.
* Fix generate auth creds message.
* Update UM S5 machine limits
* Revert accidental commit.
* Fix postprocessor, clean up code.
* Update presets for multi-extruder printing.
* Add Single Extruder and Fast profiles.
* Code cleanup
* Register and validate the UltiMaker S5 presets
* Show the Generate API Key button only for UltiMaker print hosts
The PR added it to the Physical Printer dialog for every host type, where pressing it runs an ordinary connection test and reports "API Key created". Gate it on the selected host type instead.
* Drop unused lambda captures in the UltiMaker host code
clang promotes -Wunused-lambda-capture to an error under the project's -Werror, so the file failed to build on macOS; the five callbacks do not touch this.
* Fix the Windows build of the UltiMaker print host
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
Fix Windows crash in Replace all with 3D file
Keep the replacement result message as wxString and substitute the volume
name directly.
On Windows, wxString::ToStdString() cannot encode the Unicode status icon
through the active ANSI code page and returns an empty string. Passing that
empty string to boost::format with a volume-name argument throws
boost::too_many_args and exits OrcaSlicer.
Follow-up to the rack-aware pre-print checks: after the blocking checks
pass, warn (without disabling Send) when the plate needs more matching
hotends than the rack printer currently holds - suggesting rack setup,
a nozzle info refresh, or a re-slice to avoid filament waste - or when
the only matches rely on unreliable nozzle information.
Text-only warning rows; this message board has no refresh or
don't-show-again buttons.
A print sliced for a nozzle that sits in the hotend rack (but is not
mounted) was blocked by the send dialog's mounted-nozzle diameter check,
even though the printer fetches the required nozzle itself (#14685).
Consolidate the three mounted-nozzle gates (_is_nozzle_data_valid,
is_nozzle_type_match, _is_same_nozzle_diameters) into a single
CheckErrorExtruderNozzleWithSlicing fed by s_get_slicing_extuder_nozzles,
which collects the plate's per-extruder nozzle requirements (hybrid
extruders contribute one entry per used sub-nozzle flow). The rack
extruder validates against its whole inventory (mounted + rack) with
guidance to calibrate the rack, refresh nozzle info, or re-slice, and
blocks when toolhead + rack are full (no free slot to stow a nozzle).
Other extruders keep the validity/flow/diameter checks against the
mounted nozzle.
Also add CheckErrorRackStatus, which holds Send while the printer is
still reading the rack hotend information, and judge material hardness
for the rack extruder per dispatch-mapped nozzle as a non-blocking
caution (mounted nozzles keep the blocking gate).
- FilamentMapDialog's manual page understands volume types: a mixed
(Hybrid) extruder shows separate Standard / High Flow drop zones
with live sub-nozzle counts, a validation timer with an inline
error + "set nozzle count" suggestion, and composes a per-filament
volume map on OK (persisted to the plate or globally)
- switching an extruder's Flow type rewrites the affected plate map
entries; plate maps stay sized across filament add/delete/count
changes (values keep their filament, no index shift)
- CLI: manual mapping on multi-nozzle printers synthesizes the volume
map from extruder flow types when absent; nozzle-manual mode
requires explicit maps; computed maps land on the plate so exported
projects carry filament_volume_maps
- filament_nozzle_map joins the project options (selection seeding +
filament-count resizing)
- pot entries for the new dialog strings
All 19 reference fixtures byte-identical; slicing an exported Hybrid
project reproduces its g-code byte-for-byte with the volume map
round-tripped through model_settings.config.
- Print::update_filament_maps_to_config takes filament/volume/nozzle
maps, backfills an empty volume map from extruder types, rebuilds
filament_map_2, re-expands the per-filament variant arrays, and
recomputes retract overrides keyed by resolved slots
- grouping writes its result back in every non-sequential mode;
manual multi-nozzle grouping validates the user mapping and raises a
translatable error on deviation; the engine's concrete volume
assignment is deliberately not merged yet (per-filament arrays are
already consumed by filament id, so materializing High Flow now
would change motion before the layer-aware resolvers land)
- Print::apply treats the three map keys as engine outputs in auto
modes (erased from the diff and adopted), compares them against used
filaments in manual mode, and keeps the pre-expansion snapshot in
sync with the late normalization pass so rebuilt headers reflect the
sliced state instead of resurrecting stale values
- volume/nozzle maps and extruder_nozzle_stats join the invalidation
group of filament_map (wipe tower + skirt/brim)
- PresetBundle composes full configs with an optional per-filament
volume map (plate map, else defaults derived from each extruder's
flow type); project config keeps the map sized across filament
count changes
- PartPlate stores per-plate volume/nozzle maps; Plater injects them
at every slice-composition site (incl. g-code reload and wipe-tower
estimation); BackgroundSlicingProcess reads engine results back to
the plate in auto modes
- per-filament map trust guards relaxed to size-match everywhere now
that every producer sizes the map; single-filament explicit flow
assignments are honored
- tests: grouping volume maps stay concrete, merge semantics of
update_used_filament_values, single-filament override honoring
Motion g-code is byte-identical fleet-wide including Hybrid projects
(19-fixture gate + repro determinism double-slice). Header deltas:
the map keys now dump real values, and stale pre-normalization values
(e.g. enable_prime_tower on single-used-filament prints) no longer
leak into the config block.
An extruder with more than one physical sub-nozzle can hold a mix of
Standard and High Flow nozzles. The Flow dropdown now offers Hybrid for
such extruders (extruder_max_nozzle_count > 1, nil-guarded); grouping
already expands a Hybrid extruder into per-volume nozzle groups from
extruder_nozzle_stats.
- sidebar Flow combo offers Hybrid only for multi-sub-nozzle extruders
- preset lookup treats Hybrid as Standard (presets define no Hybrid
variant); variant strings are never fabricated for it
- printer tab splits a Hybrid extruder into Standard + High Flow rows,
with matching selection-index arithmetic and sync-enable rules
- syncing from a printer whose extruder holds mixed nozzle flows now
selects Hybrid instead of collapsing to the dominant flow type
- send-to-printer flow check: a nozzle-rack extruder validates its
nozzle inventory (mounted + rack) against every needed flow instead
of comparing only the mounted nozzle; mounted-flow lookup is now
per-extruder, fixing an index shift when a nozzle reports no flow
- Hybrid is session-only in app config (stored as Standard), so a
fresh session starts from concrete flow types
Printers whose extruders have a single sub-nozzle (including all
dual-extruder machines without a rack) see no new option and identical
check behavior.
New printer option fan_direction (undefine/left/right/both, default
undefine) declares which side the auxiliary part-cooling airflow comes
from. When set and the printer has an auxiliary fan, auto-orient adds a
yaw rotation so the dominant overhang area faces the airflow, and newly
added primitive shapes are pre-oriented the same way (except the Cube,
whose axis-aligned bounding box the pressure-advance pattern calibration
depends on).
- FanDirection enum + fan_direction printer option (Accessory group,
enabled only with auxiliary_fan)
- orient engine: weighted overhang areas per candidate, yaw-direction
search, vertical rotation applied on top of the primary orientation;
the cooling weights are taken from the candidate actually chosen,
including the flat-bottom tie-break
- orient_for_cooling() for primitive placement
- set fan_direction=left on H2C/H2D/H2D Pro/X1/X1E/P1S 0.4 profiles
(X1C/H2S/P2S/X2D/Qidi X-Max 4 already carried the key, which now
takes effect)
With fan_direction unset or no auxiliary fan the vertical rotation stays
identity and auto-orient results are unchanged; slicing and g-code are
never affected.
The engine already implements prime_volume_mode (Default/Saving/Fast)
but nothing in the UI could set it, leaving prime-saving unreachable on
multi-sub-nozzle extruders and fast purge unreachable on printers that
support it.
- new PurgeModeDialog with selectable Standard/Fast or
Standard/Prime Saving cards depending on printer capability
- "Purge mode" sidebar button next to Flushing volumes; opens the
dialog and stores the choice in the project config
- printer preset-load gating: button shown only when the printer has
multiple sub-nozzles per extruder or sets support_fast_purge_mode;
stale project values the printer cannot honor reset to Default
- enable fast purge on A2L 0.4 (support_fast_purge_mode), explicit
default 0 in the common machine base
- new dialog strings added to OrcaSlicer.pot
Printers without these capabilities never show the button and their
projects keep prime_volume_mode at Default, so slicing output is
unchanged.
The Filament Track Switch (H2-series accessory, product code O2L-FTS) feeds
every AMS to both extruders through a two-track switch. Port full support
across the device layer, project config, and GUI.
Device / config:
- Model the switch-aware AMS binding (the set of extruders an AMS can feed
and which input track A/B feeds it), switch readiness, the O2L-FTS firmware
module, and the fun2 capability bit for checking a slice against installed
hardware.
- Register has_filament_switcher and enable_filament_dynamic_map as project
config that persists with the project and restores from a saved 3mf, and
force both back to false on every project/printer/CLI load path. Live
device sync is the only thing that sets them true.
GUI:
- Sidebar sync activates the switch from live device state, attributes each
AMS to the extruder its input track feeds, shows a floating status icon
(ready / not-calibrated), and surfaces a one-time tip / not-calibrated
warning.
- Send dialog gains a non-blocking slice-vs-hardware mismatch warning and a
blocking error when a slice needs dynamic nozzle mapping but the switch is
missing or not set up.
- AMS load/unload guards, AMS-view routing glyph + un-calibrated banner +
hidden external-spool road, and mapping-popup external-spool lockout.
- Filament pickers collapse the per-extruder split into a single deduplicated
"AMS filaments" group with a smart-assign toggle when the switch is ready.
- Firmware-upgrade panel lists the O2L-FTS accessory and its version.
- Device-provided filament-change steps (ams.cfs) drive the change-step
display when firmware sends them, including the three switch steps.
- "Load current filament" asks which extruder to feed via a
FeedDirectionDialog when the switch is calibrated.
Inert without the accessory: every path is gated on the switch being
installed (MQTT aux bit 29, default off) or ready, both project flags default
false, and the per-extruder AMS attribution is byte-identical, so AMS state,
the send/load UI, and sliced g-code are unchanged for every printer that does
not report a Filament Track Switch.
SoftFever