harrierpigeonandClaude Fable 5.1 1bcfe58064 Belt: stop the purge prism printing plastic no toolchange needs ...

Two independent leaks of filament on the belt purge prism, plus the
replan safety net the second one needs.

1. The early-truncation scan bounded itself with the prism's own
   toolchanges. ToolOrdering covers the whole print and the prism is a
   printed object in it, so the "last toolchange" the scan found was on
   the prism's own top layers -- it runs past every model object by
   design -- and the truncation cancelled nothing. Bound the scan at the
   tallest non-prism object (support layers included; on a belt they can
   top the object). On MCTEST5 that was 197 toolchanges over 39.4 mm of
   tower that no swap ever needed.

2. On a layer with no toolchange, the prism's entire fill printed as
   solid infill in its own filament. Drop the fills no toolchange
   claimed, right after the purge marking and before
   ensure_perimeters_infills_order() force-overrides whatever is left.
   Perimeters stay so the bar keeps a continuous wall. An earlier version
   of this deleted the entities and had to be reverted: psWipeTower can
   rerun without regenerating infill, and a later tool ordering may claim
   what this one did not. The entities are now stashed with their layer,
   region and index and put back exactly, the same reversibility contract
   layer truncation already had.

3. Both stashes go stale if an object step reruns: make_fills() clears
   and regenerates fills over m_layers only, so a stale stash would put
   old fills back next to new ones, and truncated layers would keep old
   perimeters/fills. Undo the plan's edits at the top of Print::process()
   whenever psWipeTower is not done. Every object-step invalidation also
   invalidates psWipeTower, so that condition is exactly "some object
   step may rerun"; when it is done nothing regenerates and the edits
   must stay. This also covers a prism left behind after belt mode is
   turned off, which previously stayed truncated forever.

WipingExtrusions::is_entity_overridden() becomes public so the prism can
tell claimed fills from unclaimed ones.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SsuY8Laiyh7q2zPVVKV3HZ

2026-09-12 22:23:14 -05:00

..

Algorithm

External bridge fix (#12568)

2026-06-03 10:19:04 -03:00

Arachne

Unify colinear simplify tolerance in Arachne (#15314)

2026-08-23 12:18:06 -03:00

CSGMesh

Export negative parts.

2024-10-05 21:53:16 +03:00

Execution

…

Feature

Fix thin wall fuzzy (#14309)

2026-08-22 18:46:01 -03:00

Fill

Fix uneven corner rounding in multiline infill (#15352)

2026-08-25 12:46:34 -03:00

Format

build: clear 50 warnings - pessimizing moves and null checks that cannot fail (#15408)

2026-08-28 08:05:59 -03:00

GCode

Belt: stop the purge prism printing plastic no toolchange needs

2026-09-12 22:23:14 -05:00

Geometry

Localizations refactor (#14254)

2026-06-18 09:13:51 -03:00

Optimize

…

Shape

build: clear 50 warnings - pessimizing moves and null checks that cannot fail (#15408)

2026-08-28 08:05:59 -03:00

SLA

Fix: resolve 23 MSVC compiler warnings (#15280)

2026-08-24 15:37:47 -03:00

Support

Belt: fix three tree-support bugs, one of which blocked slicing entirely

2026-09-08 23:58:47 -05:00

TextureToColor

clean up comments

2026-08-23 22:43:41 +08:00

AABBMesh.cpp

Fixes 14 Compiler Warnings [-Wmaybe-uninitialized] (#10778)

2026-08-05 21:42:15 +08:00

AABBMesh.hpp

Support larger printer sizes by using 64-bit.

2024-05-10 23:47:08 +08:00

AABBTreeIndirect.hpp

Fix bug: centroid calculation (#15399)

2026-08-27 08:16:34 -03:00

AABBTreeLines.hpp

Build Arch Fix (#15107)

2026-08-04 21:56:15 +08:00

AnyPtr.hpp

Merge some BS1.7 changes:

2023-08-08 19:08:13 +08:00

AppConfig.cpp

feat: printer agent isolation across devices (#15147)

2026-08-20 16:08:17 +08:00

AppConfig.hpp

feat: printer agent isolation across devices (#15147)

2026-08-20 16:08:17 +08:00

ArcFitter.cpp

build: clear 50 warnings - pessimizing moves and null checks that cannot fail (#15408)

2026-08-28 08:05:59 -03:00

ArcFitter.hpp

Revert changes to 'ArcFitter'

2026-03-13 02:12:10 -07:00

Arrange.cpp

ENH: improve auto arranging of multiple single color objects

2025-09-10 10:05:07 +08:00

Arrange.hpp

Fix arrange when print-by-object and have object off-plate (#8038)

2025-01-22 10:03:21 +08:00

AStar.hpp

Feature/bs1.8beta (#2844)

2023-12-01 10:42:45 +00:00

BeltBrim.cpp

Belt brim: fixes from review

2026-08-06 01:08:44 -05:00

BeltBrim.hpp

Belt printers: brim laid onto the tilted belt, with a leading apron

2026-08-06 01:08:44 -05:00

BeltGCode.cpp

GCodeWriter: extract MachineKinematics, delete BeltGCodeWriter

2026-09-08 23:57:55 -05:00

BeltGCode.hpp

GCodeWriter: fix two machine-mapping bugs the extraction preserved

2026-09-08 23:58:19 -05:00

BeltPurge.cpp

Belt: stop the purge prism printing plastic no toolchange needs

2026-09-12 22:23:14 -05:00

BeltSliceStrategy.cpp

Relocate Pre-Slice remap logic

2026-06-10 05:10:20 -05:00

BeltSliceStrategy.hpp

Relocate Pre-Slice remap logic

2026-06-10 05:10:20 -05:00

BeltTransform.cpp

delete mesh transforms (#37)

2026-05-31 05:08:42 -05:00

BeltTransform.hpp

add attribution and design notes

2026-06-10 05:10:20 -05:00

BlacklistedLibraryCheck.cpp

Revert "Fix Compile Warnings (#5963)"

2024-08-12 00:00:20 +08:00

BlacklistedLibraryCheck.hpp

…

BoundingBox.cpp

fix: explicit template instantiation for clang-cl in BoundingBox

2026-06-24 00:36:41 -03:00

BoundingBox.hpp

Fixes 4 Compiler Warnings (#10727)

2026-08-01 18:07:15 +08:00

BridgeDetector.cpp

Port "No Unsupported Perimeters" feature from SS (#3189)

2024-01-28 10:12:55 +00:00

BridgeDetector.hpp

Removed the copyright and credits in the header of each file. This information is outdated and hard to update. Orca Slicer maintains the autoher info in git history so this is not necessary.

2024-06-15 14:56:44 +08:00

Brim.cpp

Merge remote-tracking branch 'upstream/main' into haryr/aug25-rebase

2026-08-25 06:50:46 -05:00

Brim.hpp

Fix skirt and brim handling for duplicated objects (instances) (#14683)

2026-07-18 19:57:56 -03:00

BrimEarsPoint.hpp

Fix:Retain the brim ears during model merging

2025-09-21 13:47:51 +08:00

BuildVolume.cpp

belt: replace height-check skip with a belt-correct vertical-clearance check

2026-06-10 21:41:18 +02:00

BuildVolume.hpp

Part 2.6: Add belt floor support clipping for all support types

2026-04-09 23:07:07 -05:00

calib.cpp

GCodeWriter: extract MachineKinematics, delete BeltGCodeWriter

2026-09-08 23:57:55 -05:00

calib.hpp

GCodeWriter: extract MachineKinematics, delete BeltGCodeWriter

2026-09-08 23:57:55 -05:00

Channel.hpp

…

Circle.cpp

feat: Add Z Anti-Aliasing (ZAA) contouring support

2026-02-09 20:42:26 +01:00

Circle.hpp

feat: Add Z Anti-Aliasing (ZAA) contouring support

2026-02-09 20:42:26 +01:00

Clipper2Utils.cpp

build: clear 50 warnings - pessimizing moves and null checks that cannot fail (#15408)

2026-08-28 08:05:59 -03:00

Clipper2Utils.hpp

Top Surface Expansion (#14296)

2026-07-08 14:20:40 -03:00

Clipper2ZUtils.hpp

Re-include BBS's Clipperutils2 (#11415)

2025-11-22 15:39:12 +08:00

clipper.cpp

…

clipper.hpp

…

ClipperUtils.cpp

Add top/bottom surface fill order control (Outward/Inward) for Concentric, Archimedean Chords and Octagram Spiral (#14179)

2026-07-14 15:34:13 -03:00

ClipperUtils.hpp

Add top/bottom surface fill order control (Outward/Inward) for Concentric, Archimedean Chords and Octagram Spiral (#14179)

2026-07-14 15:34:13 -03:00

ClipperZUtils.hpp

Fix building errors when precompiled header support is disabled (#6879)

2024-09-23 19:26:18 +08:00

clonable_ptr.hpp

…

CMakeLists.txt

GCodeWriter: extract MachineKinematics, delete BeltGCodeWriter

2026-09-08 23:57:55 -05:00

Color.cpp

fixes compiler warnings (#9619)

2025-06-14 21:05:25 +08:00

Color.hpp

Color & shape improvements for Axes (#9495)

2025-05-08 16:00:48 +08:00

ColorDecomposeRecipe.cpp

Port color decompose recipe data and interpolation from BambuStudio

2026-08-23 22:11:49 +08:00

ColorDecomposeRecipe.hpp

BBL Port Color Mix Base

2026-08-23 22:11:48 +08:00

CommonDefs.hpp

ENH: support E3D print parts display

2025-10-28 15:30:00 +08:00

Config.cpp

Fix: resolve 23 MSVC compiler warnings (#15280)

2026-08-24 15:37:47 -03:00

Config.hpp

Cache system presets to eliminate startup and wizard load times (#14217)

2026-08-21 16:56:52 +08:00

ContourZ.cpp

ZAA: Fix Z-contouring raycast reference plane and Eigen UB (#13510)

2026-05-08 13:22:00 -03:00

CustomGCode.cpp

…

CustomGCode.hpp

ENH: add load_model_objects_and_custom_gcodes

2023-09-22 16:21:26 +08:00

CutSurface.cpp

💥Fix crash svg use surface (#13262)

2026-04-23 00:21:19 +08:00

CutSurface.hpp

Removed the copyright and credits in the header of each file. This information is outdated and hard to update. Orca Slicer maintains the autoher info in git history so this is not necessary.

2024-06-15 14:56:44 +08:00

CutUtils.cpp

Feature: Multiple dovetail cuts (#12318)

2026-05-18 12:57:48 +08:00

CutUtils.hpp

Feature: Multiple dovetail cuts (#12318)

2026-05-18 12:57:48 +08:00

EdgeGrid.cpp

ENH: comment the asserts

2025-10-28 15:29:47 +08:00

EdgeGrid.hpp

💥Fix Crash with painted Line in some corrupted models (#12806)

2026-04-07 22:22:43 +08:00

ElephantFootCompensation.cpp

…

ElephantFootCompensation.hpp

…

Emboss.cpp

Avoid using auto as type of Eigen expressions. (#8577)

2025-02-26 23:07:23 +08:00

Emboss.hpp

Fix: Globally fixing the "milimeters" typo in the code (#13295)

2026-04-19 20:28:13 -03:00

EmbossShape.hpp

Various Emboss improvements from PS (#4039)

2024-02-13 23:56:48 +08:00

enum_bitmask.hpp

Porting of Pressure Equalizer feature from Prusa Slicer 2.6.x (#2161)

2023-09-27 21:44:45 +08:00

Exception.hpp

Merge some BS1.7 changes:

2023-08-08 19:08:13 +08:00

ExPolygon.cpp

Allow specifying rotation patterns for Sparse and Solid infill (#9924)

2025-06-22 23:10:35 +08:00

ExPolygon.hpp

Merge remote-tracking branch 'upstream/main' into belt/baseChanges

2026-05-09 16:23:41 -05:00

ExPolygonCollection.cpp

…

ExPolygonCollection.hpp

…

ExPolygonSerialize.hpp

Port Emboss & SVG gizmo from PrusaSlicer (#2819)

2023-12-09 22:46:18 +08:00

ExPolygonsIndex.cpp

Port Emboss & SVG gizmo from PrusaSlicer (#2819)

2023-12-09 22:46:18 +08:00

ExPolygonsIndex.hpp

Port Emboss & SVG gizmo from PrusaSlicer (#2819)

2023-12-09 22:46:18 +08:00

Extruder.cpp

Add filament_retract_length_toolchange/filament_retract_restart_extra_toolchange config and update tool changer printer's profiles (#15039)

2026-08-05 00:13:27 +08:00

Extruder.hpp

Feature: Retract amount after wipe (#11015)

2026-07-14 14:42:16 -03:00

ExtrusionEntity.cpp

Various ZAA fixes.

2026-03-24 09:18:38 -07:00

ExtrusionEntity.hpp

Feature: Small perimeters speed for supports (#13459)

2026-07-03 17:27:57 -03:00

ExtrusionEntityCollection.cpp

Revert "Fix Compile Warnings (#5963)"

2024-08-12 00:00:20 +08:00

ExtrusionEntityCollection.hpp

Add Point3 return type getters for first and last point to ExtrusionEntity (#13855)

2026-05-27 22:07:15 +08:00

ExtrusionSimulator.cpp

feat: Add Z Anti-Aliasing (ZAA) contouring support

2026-02-09 20:42:26 +01:00

ExtrusionSimulator.hpp

…

FaceDetector.cpp

Feature/merge 1.8.4 (#3827)

2024-01-26 20:18:10 +08:00

FaceDetector.hpp

…

FilamentGroup.cpp

Fix: resolve 23 MSVC compiler warnings (#15280)

2026-08-24 15:37:47 -03:00

FilamentGroup.hpp

test: fix flaky k-medoids goldens added with H2C/A2L support (#14773)

2026-07-15 16:59:55 +08:00

FilamentGroupUtils.cpp

feat(gcode): resolve per-filament variant slots per layer

2026-07-11 15:00:33 +08:00

FilamentGroupUtils.hpp

feat(libslic3r): multi-nozzle slicing engine for H2C/A2L

2026-07-09 01:16:25 +08:00

FilamentMixer.cpp

Port mixed filament engine fixes from BambuStudio

2026-08-23 22:11:49 +08:00

FilamentMixer.hpp

Port mixed filament engine fixes from BambuStudio

2026-08-23 22:11:49 +08:00

FilamentMixerModel.hpp

BBL Port Color Mix Base

2026-08-23 22:11:48 +08:00

FileParserError.hpp

…

FirstLayerPlane.cpp

GCodeWriter: extract MachineKinematics, delete BeltGCodeWriter

2026-09-08 23:57:55 -05:00

FirstLayerPlane.hpp

Add first layer detection and fan control - prototype

2026-04-13 22:29:23 -05:00

Flow.cpp

Fix punctuation, spacing and uppercasing issues (#14848)

2026-07-20 09:47:33 -03:00

Flow.hpp

Allow specifying rotation patterns for Sparse and Solid infill (#9924)

2025-06-22 23:10:35 +08:00

FlushVolCalc.cpp

Relax flushing volume thresholds for printers needing higher purge. (#11778)

2026-01-05 22:41:04 +00:00

FlushVolCalc.hpp

FIX: display the minimum flush data

2025-09-29 20:38:38 +08:00

FlushVolPredictor.cpp

FIX: display the minimum flush data

2025-09-29 20:38:38 +08:00

FlushVolPredictor.hpp

FIX: display the minimum flush data

2025-09-29 20:38:38 +08:00

format.hpp

…

GCode.cpp

Belt: fix first-layer speed and the slow_down_layers ramp never applying

2026-09-08 23:59:02 -05:00

GCode.hpp

Belt: fix first-layer speed and the slow_down_layers ramp never applying

2026-09-08 23:59:02 -05:00

GCodeReader.cpp

Import PrusaSlicer G2/G3 arc discretization code

2025-09-24 22:49:14 -04:00

GCodeReader.hpp

Merge remote-tracking branch 'upstream/main' into libvgcode

2025-11-15 11:11:20 -05:00

GCodeSender.cpp

…

GCodeSender.hpp

…

GCodeWriter.cpp

GCodeWriter: fix two machine-mapping bugs the extraction preserved

2026-09-08 23:58:19 -05:00

GCodeWriter.hpp

GCodeWriter: fix two machine-mapping bugs the extraction preserved

2026-09-08 23:58:19 -05:00

Geometry.cpp

Port coordinate system selection for Move, Scale and Rotate gizmo (#9099)

2025-04-04 23:07:00 +08:00

Geometry.hpp

Fix issue that Geometry::deg2rad() do calculation in the same type as the parameter, which means if the parameter is int then you lose all the precision

2026-05-07 22:32:56 +08:00

I18N.hpp

…

Int128.hpp

feat: native Windows ARM64 build support (Snapdragon X Elite) (supersedes #14059) (#14381)

2026-06-25 22:10:49 +08:00

IntersectionPoints.cpp

Removed the copyright and credits in the header of each file. This information is outdated and hard to update. Orca Slicer maintains the autoher info in git history so this is not necessary.

2024-06-15 14:56:44 +08:00

IntersectionPoints.hpp

Removed the copyright and credits in the header of each file. This information is outdated and hard to update. Orca Slicer maintains the autoher info in git history so this is not necessary.

2024-06-15 14:56:44 +08:00

JumpPointSearch.cpp

Upgrade clipper & improve multi-thread performance (#7177)

2025-06-18 17:50:44 +08:00

JumpPointSearch.hpp

Feature/bs1.8beta (#2844)

2023-12-01 10:42:45 +00:00

KDTreeIndirect.hpp

…

Layer.cpp

BBL Port Color Mix Base

2026-08-23 22:11:48 +08:00

Layer.hpp

Separated Infills enhancements (#14674)

2026-07-12 11:45:00 -03:00

LayerRegion.cpp

Bridge Line Width + Improve bridge density (#11255)

2026-06-03 10:16:59 -03:00

libslic3r_version.h.in

Revert extraneous changes.

2026-03-11 17:20:12 -07:00

libslic3r.cpp

switch res for large printer

2024-05-12 23:35:41 +08:00

libslic3r.h

clean up comments

2026-08-23 22:43:41 +08:00

Line.cpp

Fix:path conflictcheck

2025-10-28 15:29:55 +08:00

Line.hpp

Various ZAA fixes.

2026-03-24 09:18:38 -07:00

LocalesUtils.cpp

Initialize parse output in string_to_double_decimal_point

2026-08-23 22:11:49 +08:00

LocalesUtils.hpp

…

MacUtils.hpp

ENH:Text not centered on mac15

2025-09-18 17:08:18 +08:00

MacUtils.mm

ENH:Text not centered on mac15

2025-09-18 17:08:18 +08:00

MarchingSquares.hpp

Optimize and simplify MarchingSquares.hpp. (#10747)

2025-10-19 19:27:55 +08:00

MaterialType.cpp

Add CoPE material type (#11867)

2026-01-14 19:51:13 +08:00

MaterialType.hpp

Material Type standarization + Technical Filament Types (#10553)

2025-10-19 21:57:34 +08:00

Measure.cpp

Avoid using auto as type of Eigen expressions. (#8577)

2025-02-26 23:07:23 +08:00

Measure.hpp

Fixes 14 Compiler Warnings [-Wmaybe-uninitialized] (#10778)

2026-08-05 21:42:15 +08:00

MeasureUtils.hpp

Measure: Port of BBS' improved version of measure gizmo

2024-11-06 20:19:52 +08:00

MeshBoolean.cpp

build: clear 50 warnings - pessimizing moves and null checks that cannot fail (#15408)

2026-08-28 08:05:59 -03:00

MeshBoolean.hpp

CGAL Fix Model: New for Linux and Mac (#12155)

2026-04-24 16:28:28 +08:00

MeshSplitImpl.hpp

Support larger printer sizes by using 64-bit.

2024-05-10 23:47:08 +08:00

MinAreaBoundingBox.cpp

…

MinAreaBoundingBox.hpp

…

MinimumSpanningTree.cpp

…

MinimumSpanningTree.hpp

…

miniz_extension.cpp

Fix garbled Chinese filenames when importing ZIP files. (#14633)

2026-07-08 20:24:55 +08:00

miniz_extension.hpp

Fix garbled Chinese filenames when importing ZIP files. (#14633)

2026-07-08 20:24:55 +08:00

Model.cpp

build: clear 50 warnings - pessimizing moves and null checks that cannot fail (#15408)

2026-08-28 08:05:59 -03:00

Model.hpp

BBL Port Color Mix Base

2026-08-23 22:11:48 +08:00

ModelArrange.cpp

Revive the disabled fff_print test suite (#14196)

2026-06-14 17:42:53 +08:00

ModelArrange.hpp

Fix tests (#10906)

2025-12-08 22:42:11 +08:00

MTUtils.hpp

…

MultiMaterialSegmentation.cpp

fix: multi-material slicing crash with line width 0 (#14455)

2026-07-22 16:49:37 -03:00

MultiMaterialSegmentation.hpp

fix: multi-material slicing crash with line width 0 (#14455)

2026-07-22 16:49:37 -03:00

MultiNozzleUtils.cpp

feat(engine): stitch per-object selector plans for sequential prints

2026-07-12 03:24:35 +08:00

MultiNozzleUtils.hpp

feat(engine): stitch per-object selector plans for sequential prints

2026-07-12 03:24:35 +08:00

MultiPoint.cpp

Fix scarf seams

2026-03-13 01:56:51 -07:00

MultiPoint.hpp

Fix scarf seams

2026-03-13 01:56:51 -07:00

MutablePolygon.cpp

Localizations refactor (#14254)

2026-06-18 09:13:51 -03:00

MutablePolygon.hpp

…

MutablePriorityQueue.hpp

Feature/bs1.8beta (#2844)

2023-12-01 10:42:45 +00:00

NormalUtils.cpp

Support larger printer sizes by using 64-bit.

2024-05-10 23:47:08 +08:00

NormalUtils.hpp

Support larger printer sizes by using 64-bit.

2024-05-10 23:47:08 +08:00

NSVGUtils.cpp

Removed the copyright and credits in the header of each file. This information is outdated and hard to update. Orca Slicer maintains the autoher info in git history so this is not necessary.

2024-06-15 14:56:44 +08:00

NSVGUtils.hpp

Removed the copyright and credits in the header of each file. This information is outdated and hard to update. Orca Slicer maintains the autoher info in git history so this is not necessary.

2024-06-15 14:56:44 +08:00

ObjColorUtils.cpp

ENH:Obj import supports up to 32 colors

2025-09-18 16:10:27 +08:00

ObjColorUtils.hpp

ENH:Obj import supports up to 32 colors

2025-09-18 16:10:27 +08:00

ObjectID.cpp

…

ObjectID.hpp

Fix skirt and brim handling for duplicated objects (instances) (#14683)

2026-07-18 19:57:56 -03:00

OpenVDBUtils.cpp

Fix: resolve 23 MSVC compiler warnings (#15280)

2026-08-24 15:37:47 -03:00

OpenVDBUtils.hpp

Support larger printer sizes by using 64-bit.

2024-05-10 23:47:08 +08:00

Orient.cpp

feat(orient): auto-orient the largest overhang toward the cooling fan

2026-07-10 16:21:48 +08:00

Orient.hpp

Fixes 1 Technical Debt and 3 Compiler Warnings [-Wclass-memaccess] (#10707)

2026-08-05 21:45:48 +08:00

ParameterUtils.cpp

FIX: add clumping detect area parameter

2025-10-02 17:07:17 +08:00

ParameterUtils.hpp

FIX: add clumping detect area parameter

2025-10-02 17:07:17 +08:00

pchheader.cpp

…

pchheader.hpp

Merge branch 'main' into dev/step-import-dialog

2025-04-05 17:47:59 +08:00

PerimeterGenerator.cpp

Pass closure state to fuzzy skin (#15378)

2026-08-26 07:39:23 -03:00

PerimeterGenerator.hpp

ENH: Relative bridge direction + Align bridge/Ironing angles with model (#12055)

2026-06-03 10:12:26 -03:00

PlaceholderParser.cpp

fix: make the error dialog caret point at the character it's blaming (#14886)

2026-08-04 22:01:45 +08:00

PlaceholderParser.hpp

add user name placeholder (#10109)

2025-07-18 15:43:46 +08:00

Platform.cpp

feat: Python Plugins

2026-07-02 17:49:36 +08:00

Platform.hpp

feat: Python Plugins

2026-07-02 17:49:36 +08:00

PNGReadWrite.cpp

A *lot* of import fixes for flatpak (#3909)

2024-01-31 11:23:29 +00:00

PNGReadWrite.hpp

A *lot* of import fixes for flatpak (#3909)

2024-01-31 11:23:29 +00:00

Point.cpp

Fix scarf seams

2026-03-13 01:56:51 -07:00

Point.hpp

Various ZAA fixes.

2026-03-24 09:18:38 -07:00

Polygon.cpp

Fix crash ZAA (#13450)

2026-05-04 15:52:34 +08:00

Polygon.hpp

Upgrade clipper & improve multi-thread performance (#7177)

2025-06-18 17:50:44 +08:00

PolygonTrimmer.cpp

…

PolygonTrimmer.hpp

Upgrade clipper & improve multi-thread performance (#7177)

2025-06-18 17:50:44 +08:00

Polyline.cpp

Fix scarf seams

2026-03-13 01:56:51 -07:00

Polyline.hpp

Sync WipeTower from BambuStudio(through ca1881761)

2026-07-27 00:48:44 +08:00

Preset.cpp

Merge remote-tracking branch 'upstream/main' into haryr/aug25-rebase

2026-08-30 23:30:51 -05:00

Preset.hpp

Cache system presets to eliminate startup and wizard load times (#14217)

2026-08-21 16:56:52 +08:00

PresetBundle.cpp

Keep mixed-color filaments intact when the extruder count changes (#15385)

2026-08-26 19:06:33 +08:00

PresetBundle.hpp

Keep mixed-color filaments intact when the extruder count changes (#15385)

2026-08-26 19:06:33 +08:00

PresetCacheFormat.cpp

Cache system presets to eliminate startup and wizard load times (#14217)

2026-08-21 16:56:52 +08:00

PresetCacheFormat.hpp

Cache system presets to eliminate startup and wizard load times (#14217)

2026-08-21 16:56:52 +08:00

PrincipalComponents2D.cpp

…

PrincipalComponents2D.hpp

…

Print.cpp

Belt: stop the purge prism printing plastic no toolchange needs

2026-09-12 22:23:14 -05:00

Print.hpp

Belt: stop the purge prism printing plastic no toolchange needs

2026-09-12 22:23:14 -05:00

PrintApply.cpp

Merge remote-tracking branch 'upstream/main' into haryr/aug25-rebase

2026-08-30 23:30:51 -05:00

PrintBase.cpp

feat: add {first_object_name} filename placeholder (#14497)

2026-07-03 00:14:32 +08:00

PrintBase.hpp

Fix: show all print validation warnings instead of only the last (#14112)

2026-06-18 12:45:26 +08:00

PrintConfig.cpp

Merge remote-tracking branch 'upstream/main' into haryr/aug25-rebase

2026-08-30 23:30:51 -05:00

PrintConfig.hpp

Merge remote-tracking branch 'upstream/main' into haryr/aug25-rebase

2026-08-30 23:30:51 -05:00

PrintConfigConstants.hpp

Fix tests (#10906)

2025-12-08 22:42:11 +08:00

PrintObject.cpp

Belt: stop the purge prism printing plastic no toolchange needs

2026-09-12 22:23:14 -05:00

PrintObjectSlice.cpp

cleanup, early purge tower stop if no longer necessary

2026-08-08 16:35:55 -05:00

PrintRegion.cpp

Divided filament for features (#14042)

2026-06-05 20:45:43 +08:00

ProjectTask.cpp

A *lot* of import fixes for flatpak (#3909)

2024-01-31 11:23:29 +00:00

ProjectTask.hpp

X2D Support (#13388)

2026-05-10 02:21:13 +08:00

QuadricEdgeCollapse.cpp

Support larger printer sizes by using 64-bit.

2024-05-10 23:47:08 +08:00

QuadricEdgeCollapse.hpp

…

Semver.cpp

…

Semver.hpp

Cache system presets to eliminate startup and wizard load times (#14217)

2026-08-21 16:56:52 +08:00

ShortEdgeCollapse.cpp

Revert "Fix Compile Warnings (#5963)"

2024-08-12 00:00:20 +08:00

ShortEdgeCollapse.hpp

…

ShortestPath.cpp

Cyclic ordering (#13578)

2026-07-27 19:52:29 -03:00

ShortestPath.hpp

Cyclic ordering (#13578)

2026-07-27 19:52:29 -03:00

SLAPrint.cpp

Fix: show all print validation warnings instead of only the last (#14112)

2026-06-18 12:45:26 +08:00

SLAPrint.hpp

Fix: show all print validation warnings instead of only the last (#14112)

2026-06-18 12:45:26 +08:00

SLAPrintSteps.cpp

Localizations refactor (#14254)

2026-06-18 09:13:51 -03:00

SLAPrintSteps.hpp

…

SlicesToTriangleMesh.cpp

Revert "Fix Compile Warnings (#5963)"

2024-08-12 00:00:20 +08:00

SlicesToTriangleMesh.hpp

…

Slicing.cpp

Fix support interface semantics, gap handling, behavior; fix bottom interface generation for organic trees; fix non organic tree interfaces (#11812)

2026-05-10 15:12:56 +08:00

Slicing.hpp

Merge upstream/main into belt/rebase/may-18

2026-05-18 21:53:24 -05:00

SlicingAdaptive.cpp

…

SlicingAdaptive.hpp

…

StreamUtils.hpp

Optimize and simplify MarchingSquares.hpp. (#10747)

2025-10-19 19:27:55 +08:00

Surface.cpp

…

Surface.hpp

Enhancement: Additional controls over bridges (#8263)

2025-02-12 22:10:57 +08:00

SurfaceCollection.cpp

Port "Extend sparse infill" from Prusa (#2134)

2023-09-29 23:39:12 +08:00

SurfaceCollection.hpp

Port "Extend sparse infill" from Prusa (#2134)

2023-09-29 23:39:12 +08:00

SurfaceMesh.hpp

Removed the copyright and credits in the header of each file. This information is outdated and hard to update. Orca Slicer maintains the autoher info in git history so this is not necessary.

2024-06-15 14:56:44 +08:00

SVG.cpp

A *lot* of import fixes for flatpak (#3909)

2024-01-31 11:23:29 +00:00

SVG.hpp

…

Technologies.hpp

Define WXINSPECTOR_DISABLE globally to prevent include-order-dependent class layout (#15063)

2026-08-02 18:20:35 +08:00

Tesselate.cpp

…

Tesselate.hpp

…

TextConfiguration.hpp

Removed the copyright and credits in the header of each file. This information is outdated and hard to update. Orca Slicer maintains the autoher info in git history so this is not necessary.

2024-06-15 14:56:44 +08:00

TexturePainting.cpp

Port colored OBJ import pipeline from BambuStudio

2026-08-23 22:11:49 +08:00

TexturePainting.hpp

Port colored OBJ import pipeline from BambuStudio

2026-08-23 22:11:49 +08:00

Thread.cpp

Merge some BS1.7 changes:

2023-08-08 19:08:13 +08:00

Thread.hpp

fix(threads): bump worker thread stack to 16MB to survive CGAL emboss (#13772)

2026-05-21 16:24:54 +08:00

Time.cpp

try to fix flatpak

2026-01-29 19:19:37 +08:00

Time.hpp

init

2026-01-23 17:05:56 +08:00

Timer.cpp

Removed the copyright and credits in the header of each file. This information is outdated and hard to update. Orca Slicer maintains the autoher info in git history so this is not necessary.

2024-06-15 14:56:44 +08:00

Timer.hpp

Fix: Globally fixing the "milisecond" typo in the code (#13329)

2026-04-23 10:34:36 -03:00

TriangleMesh.cpp

Fix tests (#10906)

2025-12-08 22:42:11 +08:00

TriangleMesh.hpp

Fix tests (#10906)

2025-12-08 22:42:11 +08:00

TriangleMeshDeal.cpp

Update eigen to v5.0.1 and libigl to v2.6.0. (#11311)

2026-05-12 15:09:13 +08:00

TriangleMeshDeal.hpp

BBS Port: Mesh Subdivision (#12150)

2026-02-12 08:42:01 +08:00

TriangleMeshSlicer.cpp

Fix contour cleanup across coplanar triangles (#15366)

2026-08-25 19:31:09 -03:00

TriangleMeshSlicer.hpp

ENH: add vertical support enforcer

2025-02-08 11:34:40 +08:00

TriangleSelector.cpp

Merge remote-tracking branch 'upstream/main' into haryr/aug25-rebase

2026-08-30 23:30:51 -05:00

TriangleSelector.hpp

Merge remote-tracking branch 'upstream/main' into haryr/aug25-rebase

2026-08-30 23:30:51 -05:00

TriangleSetSampling.cpp

Revert "Fix Compile Warnings (#5963)"

2024-08-12 00:00:20 +08:00

TriangleSetSampling.hpp

…

TriangulateWall.cpp

Revert "Fix Compile Warnings (#5963)"

2024-08-12 00:00:20 +08:00

TriangulateWall.hpp

Support larger printer sizes by using 64-bit.

2024-05-10 23:47:08 +08:00

Triangulation.cpp

Revert "Fix Compile Warnings (#5963)"

2024-08-12 00:00:20 +08:00

Triangulation.hpp

Removed the copyright and credits in the header of each file. This information is outdated and hard to update. Orca Slicer maintains the autoher info in git history so this is not necessary.

2024-06-15 14:56:44 +08:00

TryCatchSignal.cpp

…

TryCatchSignal.hpp

…

TryCatchSignalSEH.cpp

…

TryCatchSignalSEH.hpp

…

utils.cpp

Cache system presets to eliminate startup and wizard load times (#14217)

2026-08-21 16:56:52 +08:00

Utils.hpp

Cache system presets to eliminate startup and wizard load times (#14217)

2026-08-21 16:56:52 +08:00

VariableWidth.cpp

feat: Add Z Anti-Aliasing (ZAA) contouring support

2026-02-09 20:42:26 +01:00

VariableWidth.hpp

…

Zipper.cpp

…

Zipper.hpp

…