mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-10-17 20:57:26 +00:00
Feature/merge 1.8.4 (#3827)
* FIX: the logic of buried points that were not buried JIRA: none Signed-off-by: Kunlong Ma <kunlong.ma@bambulab.com> Change-Id: Id95174659c5fce7feba409eb5e14916608745fa4 * ci: update network module based on commit bc7ca98 Change-Id: I923526f0bf9ce5a288144fa1f9b0f2fc640f41b7 * Fix Firefox Co-authored-by: hadess <hadess@hadess.net> * FIX: cali: custom created filament from AMS displayed as incompatible jira: new remove the condition: is_system Change-Id: Ib1366966bbdbe01bc9e2483d9914d270ebefa976 * FIX: duplicated items in comboBox at calibration completed page jira: new Change-Id: I4749a2206df16c438e0d3098e36274b2a20f313e * ENH:update support for P1S plus jira:[for p1s plus] Change-Id: Id577d4e94e2162cb0045d261dfaa5f396ecded2f * ENH: CLI: add mk information support JIRA: no jira Change-Id: Idd89b143d439de50d9f52eb8aec95b262d66875d * ENH:calibration support p1p plus jira:[plus] Change-Id: Ia290d3a8a8b9adaac7a6ee26d9a8b5ea0c1b3aee * FIX: add log for base_id and filament_id github: #3087 Change-Id: Iebfbd0f224fce49f33fc81c71e6108f6e3abb5ff * FIX: sync whole preset vendor directory Change-Id: I191dbe979a87ff35d38cab1149b7975664344838 Jira: STUDIO-5534 (cherry picked from commit 628866608116336453804aa1217dd55db04d47ad) * FIX: use t_utc for debug only Change-Id: Ia05d8969d4de3dd38908980d6e17a3ebb11ca279 Github 3045 Change-Id: I77935df53bbf2772b1146e5c330c537165a3a2e6 * FIX:make sort_volumes right Jira: STUDIO-5645 Change-Id: If324c9115bfaaf0c1b7b4be7c7ee96ba6b8ac890 * ENH:keep an unload logic jira:[for unload] Change-Id: Id30ec71ffa5b2dac89346ea47ca48a62479e3ab1 * FIX: several problems with mesh boolean 1. Cut with multiple volumes are OK now. 2. Close mesh boolean fail error with new object or open object 3. Fix wrong name and config of boolean resulting object github: #3118 jira: none Change-Id: If2c9dbfb36cbdfe4917a2371217923891bb7909c (cherry picked from commit 982c0ecb92cf7c2b5ae5972ab900a6b10e7dda50) * NEW:limit the length of project name jira:[project name] Change-Id: I955620f7073b3b7fda280d1118524f561d047751 * ENH:adjusting the warning level of timelpase jira:[STUDIO-5662] Change-Id: I4902b22d316f5e09a97a62c88b8a98e55c405434 * FIX: 3mf specification: change namespace form slic3rpe to BambuStudio Jira: XXXX Change-Id: Id705affc875ef23fdf2ac6d79f0cb0aafc4f7050 * NEW: Open MakerWorld With BambuStudio GetParam JIRA: none Change-Id: I0d65b364f1cd2d634a88882ab072c3e61ea89167 (cherry picked from commit 8eaf45e5359439a7c796fd79876c86775abcf48e) * FIX: Filament issue generated when creating a printer Jira: XXXX Change-Id: I976770b69b47641bd54aa7a9c56fba7f58d1ab68 (cherry picked from commit ba42188b93c58b3954234d72acdd9769a68e3d3c) * FIX: Blank page appears when editing presets Jira: 5563 Change-Id: I4c49e05515b1beff55991e92f8079c4499c27eab (cherry picked from commit e86517d290f4cd0765a230d811b0ddf2c9f34c17) * FIX: context menu didn't update UI jira: STUDIO-5691 Change-Id: Ia66b8623d832eba805aff5320941233a68ff258b * FIX: crash of "filling bed" "get_arrange_settings() const" gets trapped in infinite recursive calling. Now we delete this function. jira: STUDIO-5688 Change-Id: Ia39974734bb37b2a2f06b5bf78185f01be726872 * FIX: boolean hangs in the middle of color painting Can't do splits in combine_mesh_fff, as do_boolean of mcut will split meshes. jira: STUDIO-5693 Change-Id: Idddb7d20dd7ca386c39ddd3d87d9defc3136aa5d (cherry picked from commit 6c67d015941458e37faaf0015b6509b5a0eadc0e) * Fix: Fix a number of compilation problems issues found when using gcc version 13.2.0 (GCC) in a Flatpak sandbox github : https://github.com/bambulab/BambuStudio/issues/3074 github pull request: https://github.com/bambulab/BambuStudio/pull/3096 Change-Id: I08aeac593eb1ce7675894df72e8489200bae713d (cherry picked from commit 069d133d66bfa682de4a860e379d5dc16b3d907c) * fix: macos icns issue when icon was not attached github pull request:https://github.com/bambulab/BambuStudio/pull/3116 Change-Id: I49072ad49f3af7669a6d307c791594ade210da50 (cherry picked from commit c977e5582e3a30ad16dd267810037423aad9a53c) * FIX: Add flush_length for change_filament_gcode Change-Id: I30f4b97d3d61c2a57f0e92f157cbd31c38aa7265 Jira: XXXX (cherry picked from commit 92eb2bac977a0c4095b316cbbc6580fb5228b710) * FIX: edit preset dialog can't close on mac Jira: 5696 Change-Id: Ib33dfd07cc588ddd3805e3490a4d8c36dcd890ac * ENH: add dev_ota_version in ssdp JIRA: STUDIO-5740 Change-Id: Ic80e6d4b9bf82813fdc4a76604a3d36213d12b03 Signed-off-by: Stone Li <stone.li@bambulab.com> * NEW:Adapt to multicolour and gradient colour JIRA:xxxx Change-Id: I8084cab603d5681cbcaf2d6f5e0d7ad5419cb2af * NEW:Adaptation of semi transparent materials JIRA: XXXX Change-Id: Ie32d8ce67c37b85eb6d7d6594cb514a696307e68 * FIX: disable flush options if prime tower is unchecked jira: STUDIO-5639 Change-Id: I25081584d430bc7d062e14bcc2cdbf7522cf9d99 * ENH: refine GetVersion for HMS query JIRA: STUDIO-5763 Change-Id: Ia3ccc07d79cc0736eb12e9782da50211abb74772 Signed-off-by: Stone Li <stone.li@bambulab.com> * FIX: Prefer old selection when sync AMS not compatible Change-Id: I6b18db51887132a997cf78d70fff9a92e23bc44a Jira: STUDIO-5416 (cherry picked from commit 077fae29823cf4f3071d408b1b40f55ee0cb33c6) * FIX: The flushing was not auto-calc when sync ams list JIRA: STUDIO-5551 1. flushing volume auto-calc when sync ams list 2. flushing volume takes the larger calculation value when filament has multi-colors Signed-off-by: Kunlong Ma <kunlong.ma@bambulab.com> Change-Id: I72e6f9780ea56103a44c2da6068440a4615c254d * FIX:fixed invalid links jira:[fixed link] Change-Id: I036a38b6e8e94da762f93805bd7be706538771fe * FIX: Prompt to delete problematic presets Jira: XXXX Change-Id: Ic43f7bb782794d7ab0b6acbffbb5d73e94f6ed73 * FIX:fixed incorrect HMS content jira:[STUDIO-5818] Change-Id: Ia2896d6f0ab1ffedbc850e54168acece8e47bdbb * FIX:external transparent material display error JIRA: STUDIO-5845 Change-Id: I0a4f05ac5d5c0ac49d85a704ee65a7221c5f1e1d * FIX: [5846] Custom Filament Page show System Filament Simultaneously solve: When downloading Preset from the cloud, the filament_id of the preset in m_preset is null. Jira: 5846 Change-Id: I6ba1b46fe92e345614b6a4af3fffa87d81fa2456 * FIX:A1 and p1 series do not support custom materials JIRA:XXXX Change-Id: Ib0459273d1f9a7152a5563757204634a8d0cd6f5 * FIX: exception when comparing profiles jira:[NEW] Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com> Change-Id: I946b5fcd35f779d271df2b3de731fdcada5aab29 (cherry picked from commit 00e739570812e5c4be3e0f7702ce8c72c0f9e72b) * FIX: hide_id_middle_string Change-Id: I28f32ec526b443d31d7992971b80ab1cb737deb6 Github: STUDIO-5825 * ENH: modify some logs level JIRA: STUDIO-5958 Change-Id: I5a8592dfb8ffa9a81952535cb30944f867aa0e22 Signed-off-by: Stone Li <stone.li@bambulab.com> * NEW:build plate marker detect Change-Id: I70f03efea688bb6ce71c3f5990bb3c50605ab184 * FIX: Studio UI Freeze when saving user preset github: #3335 Change-Id: Idaf53f673a3e46408826c06bdde2c592395d358b * update bbl plugin version * fix build errors * update bbl profiles * update color --------- Signed-off-by: Kunlong Ma <kunlong.ma@bambulab.com> Signed-off-by: Stone Li <stone.li@bambulab.com> Co-authored-by: Kunlong Ma <kunlong.ma@bambulab.com> Co-authored-by: gerrit <gerrit@bambulab.com> Co-authored-by: liz.li <liz.li@bambulab.com> Co-authored-by: tao wang <tao.wang@bambulab.com> Co-authored-by: lane.wei <lane.wei@bambulab.com> Co-authored-by: maosheng.wei <maosheng.wei@bambulab.com> Co-authored-by: chunmao.guo <chunmao.guo@bambulab.com> Co-authored-by: zhou.xu <zhou.xu@bambulab.com> Co-authored-by: Arthur <arthur.tang@bambulab.com> Co-authored-by: Bastien Nocera <hadess@hadess.net> Co-authored-by: zhimin.zeng <zhimin.zeng@bambulab.com> Co-authored-by: hu.wang <hu.wang@bambulab.com> Co-authored-by: Stone Li <stone.li@bambulab.com> Co-authored-by: XunZhangBambu <xun.zhang@bambulab.com>
This commit is contained in:
203 files changed
+1995
-625
No files matched your search
@@ -26,6 +26,17 @@
|
||||
<string>????</string>
|
||||
<key>CFBundleVersion</key>
|
||||
<string>${MACOSX_BUNDLE_BUNDLE_VERSION}</string>
|
||||
<key>CFBundleURLTypes</key>
|
||||
<array>
|
||||
<dict>
|
||||
<key>CFBundleURLName</key>
|
||||
<string>orcasliceropen url</string>
|
||||
<key>CFBundleURLSchemes</key>
|
||||
<array>
|
||||
<string>orcasliceropen</string>
|
||||
</array>
|
||||
</dict>
|
||||
</array>
|
||||
<key>CFBundleDocumentTypes</key>
|
||||
<array>
|
||||
<dict>
|
||||
@@ -35,7 +46,7 @@
|
||||
<string>STL</string>
|
||||
</array>
|
||||
<key>CFBundleTypeIconFile</key>
|
||||
<string>stl.icns</string>
|
||||
<string>images/stl.icns</string>
|
||||
<key>CFBundleTypeName</key>
|
||||
<string>STL</string>
|
||||
<key>CFBundleTypeRole</key>
|
||||
@@ -52,7 +63,7 @@
|
||||
<string>OBJ</string>
|
||||
</array>
|
||||
<key>CFBundleTypeIconFile</key>
|
||||
<string>OrcaSlicer.icns</string>
|
||||
<string>images/OrcaSlicer.icns</string>
|
||||
<key>CFBundleTypeName</key>
|
||||
<string>STL</string>
|
||||
<key>CFBundleTypeRole</key>
|
||||
@@ -69,7 +80,7 @@
|
||||
<string>AMF</string>
|
||||
</array>
|
||||
<key>CFBundleTypeIconFile</key>
|
||||
<string>OrcaSlicer.icns</string>
|
||||
<string>images/OrcaSlicer.icns</string>
|
||||
<key>CFBundleTypeName</key>
|
||||
<string>AMF</string>
|
||||
<key>CFBundleTypeRole</key>
|
||||
@@ -86,7 +97,7 @@
|
||||
<string>3MF</string>
|
||||
</array>
|
||||
<key>CFBundleTypeIconFile</key>
|
||||
<string>OrcaSlicer.icns</string>
|
||||
<string>images/OrcaSlicer.icns</string>
|
||||
<key>CFBundleTypeName</key>
|
||||
<string>3MF</string>
|
||||
<key>CFBundleTypeRole</key>
|
||||
@@ -103,7 +114,7 @@
|
||||
<string>GCODE</string>
|
||||
</array>
|
||||
<key>CFBundleTypeIconFile</key>
|
||||
<string>gcode.icns</string>
|
||||
<string>images/gcode.icns</string>
|
||||
<key>CFBundleTypeName</key>
|
||||
<string>GCODE</string>
|
||||
<key>CFBundleTypeRole</key>
|
||||
|
||||
@@ -1,4 +1,4 @@
|
||||
<svg width="50" height="68" viewBox="0 0 50 68" fill="none" xmlns="http://www.w3.org/2000/svg">
|
||||
<path d="M50 64C50 66.2091 48.2091 68 46 68H4C1.79086 68 0 66.2091 0 64V4C0 1.79086 1.79086 0 4 0H46C48.2091 0 50 1.79086 50 4V64Z" fill="#FEFFFE"/>
|
||||
<path fill-rule="evenodd" clip-rule="evenodd" d="M3.84619 4V0H7.69234V4H3.84619ZM0 4V8H3.84615V4H0ZM23.0767 4V8H19.231V4H23.0767ZM19.231 64V68H23.0771V64H26.9229V60H23.0771V56H26.9229V52H23.0771V48H26.9229V44H23.0771V40H26.9229V36H23.0771V32H26.9229V28H23.0771V24H26.9229V20H23.0771V16H26.9229V12H23.0771V8H26.9229V4H23.0771V0H19.231L19.231 4H15.3848V8H19.231V12H15.3848V16H19.231V20H15.3848V24H19.231L19.231 28H15.3848V32H19.231V36H15.3848V40H19.231V44H15.3848V48H19.231V52H15.3848V56H19.231L19.231 60H15.3848V64H19.231ZM19.231 64V60H23.0767V64H19.231ZM19.231 56V52H23.0767V56H19.231ZM19.231 48V44H23.0767V48H19.231ZM19.231 40V36H23.0767V40H19.231ZM19.231 32L19.231 28H23.0767V32H19.231ZM19.231 24V20H23.0767V24H19.231ZM19.231 16H23.0767V12H19.231V16ZM0 40V36H3.84615V40H0ZM0 16V12H3.84615V16H0ZM0 48V44H3.84615V48H0ZM0 24V20H3.84615V24H0ZM0 56V52H3.84615V56H0ZM3.84619 28V24H7.69234V28H3.84619ZM26.9233 24V28H30.769V32H26.9233V36H30.769V40H26.9233V44H30.769V48H26.9233V52H30.769V56H26.9233V60H30.769V64H26.9233V68H30.7694V64H34.6152V68H38.4613V64H34.6152V60H38.4613V56H34.6152V52H38.4613V48H34.6152V44H38.4613V40H34.6152V36H38.4613V32H34.6152L34.6152 28H38.4613V24H34.6152V20H38.4613V16H34.6152V12H38.4613V8H34.6152V4H38.4613V0H34.6152L34.6152 4H30.7694V0H26.9233V4H30.769V8H26.9233V12H30.769V16H26.9233V20H30.769V24H26.9233ZM34.6152 8H30.7694V12H34.6152V8ZM34.6152 16H30.7694V20H34.6152V16ZM34.6152 24L34.6152 28H30.7694V24H34.6152ZM34.6152 32V36H30.7694V32H34.6152ZM34.6152 40H30.7694V44H34.6152V40ZM34.6152 48H30.7694V52H34.6152V48ZM34.6152 56L34.6152 60H30.7694V56H34.6152ZM3.84619 60V56H7.69234V60H3.84619ZM3.84619 64V68H7.69234V64H3.84619ZM0 32V28H3.84615V32H0ZM0 64V60H3.84615V64H0ZM3.84619 36V32H7.69234V36H3.84619ZM3.84619 12V8H7.69234V12H3.84619ZM3.84619 44V40H7.69234V44H3.84619ZM3.84619 20V16H7.69234V20H3.84619ZM3.84619 52V48H7.69234V52H3.84619ZM7.69238 8V4H11.5386V8H7.69238ZM7.69238 40V36H11.5386V40H7.69238ZM7.69238 16V12H11.5386V16H7.69238ZM7.69238 48V44H11.5386V48H7.69238ZM7.69238 24V20H11.5386V24H7.69238ZM7.69238 56V52H11.5386V56H7.69238ZM11.5386 28V24H15.3847V28H11.5386ZM11.5386 60V56H15.3847V60H11.5386ZM11.5386 64V68H15.3847V64H11.5386ZM7.69238 32V28H11.5386V32H7.69238ZM7.69238 64V60H11.5386V64H7.69238ZM11.5386 4V0H15.3847V4H11.5386ZM11.5386 36V32H15.3847V36H11.5386ZM11.5386 12V8H15.3847V12H11.5386ZM11.5386 44V40H15.3847V44H11.5386ZM11.5386 20V16H15.3847V20H11.5386ZM11.5386 52V48H15.3847V52H11.5386ZM38.4614 4V8H42.3076V12H38.4614V16H42.3076V20H38.4614V24H42.3076L42.3076 28H38.4614V32H42.3076V36H38.4614V40H42.3076V44H38.4614V48H42.3076V52H38.4614V56H42.3076L42.3076 60H38.4614V64H42.3076V68H46.1537V64H42.3076V60H46.1537V56H42.3076V52H46.1537V48H42.3076V44H46.1537V40H42.3076V36H46.1537V32H42.3076L42.3076 28H46.1537V24H42.3076V20H46.1537V16H42.3076V12H46.1537V8H42.3076V4H46.1537V0H42.3076L42.3076 4H38.4614ZM46.1538 32V28H50V32H46.1538ZM46.1538 60V64H50V60H46.1538ZM46.1538 8V4H50V8H46.1538ZM46.1538 36V40H50V36H46.1538ZM46.1538 16V12H50V16H46.1538ZM46.1538 44V48H50V44H46.1538ZM46.1538 24V20H50V24H46.1538ZM46.1538 52V56H50V52H46.1538Z" fill="#D9D9D9"/>
|
||||
<path fill-rule="evenodd" clip-rule="evenodd" d="M3.84619 4V0H7.69234V4H3.84619ZM0 4V8H3.84615V4H0ZM23.0767 4V8H19.231V4H23.0767ZM19.231 64V68H23.0771V64H26.9229V60H23.0771V56H26.9229V52H23.0771V48H26.9229V44H23.0771V40H26.9229V36H23.0771V32H26.9229V28H23.0771V24H26.9229V20H23.0771V16H26.9229V12H23.0771V8H26.9229V4H23.0771V0H19.231L19.231 4H15.3848V8H19.231V12H15.3848V16H19.231V20H15.3848V24H19.231L19.231 28H15.3848V32H19.231V36H15.3848V40H19.231V44H15.3848V48H19.231V52H15.3848V56H19.231L19.231 60H15.3848V64H19.231ZM19.231 64V60H23.0767V64H19.231ZM19.231 56V52H23.0767V56H19.231ZM19.231 48V44H23.0767V48H19.231ZM19.231 40V36H23.0767V40H19.231ZM19.231 32L19.231 28H23.0767V32H19.231ZM19.231 24V20H23.0767V24H19.231ZM19.231 16H23.0767V12H19.231V16ZM0 40V36H3.84615V40H0ZM0 16V12H3.84615V16H0ZM0 48V44H3.84615V48H0ZM0 24V20H3.84615V24H0ZM0 56V52H3.84615V56H0ZM3.84619 28V24H7.69234V28H3.84619ZM26.9233 24V28H30.769V32H26.9233V36H30.769V40H26.9233V44H30.769V48H26.9233V52H30.769V56H26.9233V60H30.769V64H26.9233V68H30.7694V64H34.6152V68H38.4613V64H34.6152V60H38.4613V56H34.6152V52H38.4613V48H34.6152V44H38.4613V40H34.6152V36H38.4613V32H34.6152L34.6152 28H38.4613V24H34.6152V20H38.4613V16H34.6152V12H38.4613V8H34.6152V4H38.4613V0H34.6152L34.6152 4H30.7694V0H26.9233V4H30.769V8H26.9233V12H30.769V16H26.9233V20H30.769V24H26.9233ZM34.6152 8H30.7694V12H34.6152V8ZM34.6152 16H30.7694V20H34.6152V16ZM34.6152 24L34.6152 28H30.7694V24H34.6152ZM34.6152 32V36H30.7694V32H34.6152ZM34.6152 40H30.7694V44H34.6152V40ZM34.6152 48H30.7694V52H34.6152V48ZM34.6152 56L34.6152 60H30.7694V56H34.6152ZM3.84619 60V56H7.69234V60H3.84619ZM3.84619 64V68H7.69234V64H3.84619ZM0 32V28H3.84615V32H0ZM0 64V60H3.84615V64H0ZM3.84619 36V32H7.69234V36H3.84619ZM3.84619 12V8H7.69234V12H3.84619ZM3.84619 44V40H7.69234V44H3.84619ZM3.84619 20V16H7.69234V20H3.84619ZM3.84619 52V48H7.69234V52H3.84619ZM7.69238 8V4H11.5386V8H7.69238ZM7.69238 40V36H11.5386V40H7.69238ZM7.69238 16V12H11.5386V16H7.69238ZM7.69238 48V44H11.5386V48H7.69238ZM7.69238 24V20H11.5386V24H7.69238ZM7.69238 56V52H11.5386V56H7.69238ZM11.5386 28V24H15.3847V28H11.5386ZM11.5386 60V56H15.3847V60H11.5386ZM11.5386 64V68H15.3847V64H11.5386ZM7.69238 32V28H11.5386V32H7.69238ZM7.69238 64V60H11.5386V64H7.69238ZM11.5386 4V0H15.3847V4H11.5386ZM11.5386 36V32H15.3847V36H11.5386ZM11.5386 12V8H15.3847V12H11.5386ZM11.5386 44V40H15.3847V44H11.5386ZM11.5386 20V16H15.3847V20H11.5386ZM11.5386 52V48H15.3847V52H11.5386ZM38.4614 4V8H42.3076V12H38.4614V16H42.3076V20H38.4614V24H42.3076L42.3076 28H38.4614V32H42.3076V36H38.4614V40H42.3076V44H38.4614V48H42.3076V52H38.4614V56H42.3076L42.3076 60H38.4614V64H42.3076V68H46.1537V64H42.3076V60H46.1537V56H42.3076V52H46.1537V48H42.3076V44H46.1537V40H42.3076V36H46.1537V32H42.3076L42.3076 28H46.1537V24H42.3076V20H46.1537V16H42.3076V12H46.1537V8H42.3076V4H46.1537V0H42.3076L42.3076 4H38.4614ZM46.1538 32V28H50V32H46.1538ZM46.1538 60V64H50V60H46.1538ZM46.1538 8V4H50V8H46.1538ZM46.1538 36V40H50V36H46.1538ZM46.1538 16V12H50V16H46.1538ZM46.1538 44V48H50V44H46.1538ZM46.1538 24V20H50V24H46.1538ZM46.1538 52V56H50V52H46.1538Z" fill="#D9D9D9" fill-opacity="1.0"/>
|
||||
</svg>
|
||||
|
Before Width: | Height: | Size: 3.3 KiB After Width: | Height: | Size: 3.3 KiB |
@@ -1,4 +1,4 @@
|
||||
<svg width="25" height="25" viewBox="0 0 25 25" fill="none" xmlns="http://www.w3.org/2000/svg">
|
||||
<path d="M25 12.5C25 5.59644 19.4036 0 12.5 0V0C5.59644 0 0 5.59644 0 12.5V12.5C0 19.4036 5.59644 25 12.5 25V25C19.4036 25 25 19.4036 25 12.5V12.5Z" fill="#FEFFFE"/>
|
||||
<path fill-rule="evenodd" clip-rule="evenodd" d="M0.250045 15C0.0860757 14.1922 0 13.3562 0 12.5C0 11.6438 0.0860756 10.8078 0.250045 10H5V15H0.250045ZM5 22.5009C4.05303 21.7896 3.21038 20.947 2.49908 20H5V22.5009ZM15 24.75C14.1922 24.9139 13.3562 25 12.5 25C11.6438 25 10.8078 24.9139 10 24.75V20H15V24.75ZM22.5009 20C21.7896 20.947 20.947 21.7896 20 22.5009V20H22.5009ZM25 12.5C25 13.3562 24.9139 14.1922 24.75 15H20V10H24.75C24.9139 10.8078 25 11.6438 25 12.5ZM20 2.49908C20.947 3.21038 21.7896 4.05303 22.5009 5H20V2.49908ZM10 0.250045C10.8078 0.0860756 11.6438 0 12.5 0C13.3562 0 14.1922 0.0860757 15 0.250045V5H10V0.250045ZM5 2.49908C4.05303 3.21038 3.21038 4.05303 2.49908 5H5V10H10V15H5V20H10V15H15V20H20V15H15V10H20V5H15V10H10V5H5V2.49908Z" fill="#D9D9D9"/>
|
||||
<path fill-rule="evenodd" clip-rule="evenodd" d="M0.250045 15C0.0860757 14.1922 0 13.3562 0 12.5C0 11.6438 0.0860756 10.8078 0.250045 10H5V15H0.250045ZM5 22.5009C4.05303 21.7896 3.21038 20.947 2.49908 20H5V22.5009ZM15 24.75C14.1922 24.9139 13.3562 25 12.5 25C11.6438 25 10.8078 24.9139 10 24.75V20H15V24.75ZM22.5009 20C21.7896 20.947 20.947 21.7896 20 22.5009V20H22.5009ZM25 12.5C25 13.3562 24.9139 14.1922 24.75 15H20V10H24.75C24.9139 10.8078 25 11.6438 25 12.5ZM20 2.49908C20.947 3.21038 21.7896 4.05303 22.5009 5H20V2.49908ZM10 0.250045C10.8078 0.0860756 11.6438 0 12.5 0C13.3562 0 14.1922 0.0860757 15 0.250045V5H10V0.250045ZM5 2.49908C4.05303 3.21038 3.21038 4.05303 2.49908 5H5V10H10V15H5V20H10V15H15V20H20V15H15V10H20V5H15V10H10V5H5V2.49908Z" fill="#D9D9D9" fill-opacity="1.0"/>
|
||||
</svg>
|
||||
|
Before Width: | Height: | Size: 1.0 KiB After Width: | Height: | Size: 1.0 KiB |
@@ -28,7 +28,6 @@
|
||||
"support_print_all":false,
|
||||
"support_print_without_sd":false,
|
||||
"support_flow_calibration":true,
|
||||
"support_build_plate_marker_detect":false,
|
||||
"support_lidar_calibration":false,
|
||||
"support_ai_monitoring":false,
|
||||
"support_first_layer_inspect":false,
|
||||
|
||||
@@ -28,7 +28,6 @@
|
||||
"support_print_all":false,
|
||||
"support_print_without_sd":false,
|
||||
"support_flow_calibration":true,
|
||||
"support_build_plate_marker_detect":false,
|
||||
"support_lidar_calibration":false,
|
||||
"support_ai_monitoring":false,
|
||||
"support_first_layer_inspect":false,
|
||||
|
||||
@@ -1 +1 @@
|
||||
01.08.02.01
|
||||
01.08.03.01
|
||||
+125
-1
@@ -1,7 +1,7 @@
|
||||
{
|
||||
"name": "Bambulab",
|
||||
"url": "http://www.bambulab.com/Parameters/vendor/BBL.json",
|
||||
"version": "01.08.00.13",
|
||||
"version": "01.08.00.18",
|
||||
"force_update": "0",
|
||||
"description": "the initial version of BBL configurations",
|
||||
"machine_model_list": [
|
||||
@@ -143,6 +143,22 @@
|
||||
"name": "0.08mm Extra Fine @BBL A1",
|
||||
"sub_path": "process/0.08mm Extra Fine @BBL A1.json"
|
||||
},
|
||||
{
|
||||
"name": "0.08mm High Quality @BBL X1C",
|
||||
"sub_path": "process/0.08mm High Quality @BBL X1C.json"
|
||||
},
|
||||
{
|
||||
"name": "0.08mm High Quality @BBL P1P",
|
||||
"sub_path": "process/0.08mm High Quality @BBL P1P.json"
|
||||
},
|
||||
{
|
||||
"name": "0.08mm High Quality @BBL A1M",
|
||||
"sub_path": "process/0.08mm High Quality @BBL A1M.json"
|
||||
},
|
||||
{
|
||||
"name": "0.08mm High Quality @BBL A1",
|
||||
"sub_path": "process/0.08mm High Quality @BBL A1.json"
|
||||
},
|
||||
{
|
||||
"name": "0.10mm Standard @BBL X1C 0.2 nozzle",
|
||||
"sub_path": "process/0.10mm Standard @BBL X1C 0.2 nozzle.json"
|
||||
@@ -155,6 +171,22 @@
|
||||
"name": "0.10mm Standard @BBL A1 0.2 nozzle",
|
||||
"sub_path": "process/0.10mm Standard @BBL A1 0.2 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "0.10mm High Quality @BBL X1C 0.2 nozzle",
|
||||
"sub_path": "process/0.10mm High Quality @BBL X1C 0.2 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "0.10mm High Quality @BBL P1P 0.2 nozzle",
|
||||
"sub_path": "process/0.10mm High Quality @BBL P1P 0.2 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "0.10mm High Quality @BBL A1M 0.2 nozzle",
|
||||
"sub_path": "process/0.10mm High Quality @BBL A1M 0.2 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "0.10mm High Quality @BBL A1 0.2 nozzle",
|
||||
"sub_path": "process/0.10mm High Quality @BBL A1 0.2 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "0.40mm Standard @BBL X1C 0.8 nozzle",
|
||||
"sub_path": "process/0.40mm Standard @BBL X1C 0.8 nozzle.json"
|
||||
@@ -219,6 +251,22 @@
|
||||
"name": "0.12mm Fine @BBL A1",
|
||||
"sub_path": "process/0.12mm Fine @BBL A1.json"
|
||||
},
|
||||
{
|
||||
"name": "0.12mm High Quality @BBL X1C",
|
||||
"sub_path": "process/0.12mm High Quality @BBL X1C.json"
|
||||
},
|
||||
{
|
||||
"name": "0.12mm High Quality @BBL P1P",
|
||||
"sub_path": "process/0.12mm High Quality @BBL P1P.json"
|
||||
},
|
||||
{
|
||||
"name": "0.12mm High Quality @BBL A1M",
|
||||
"sub_path": "process/0.12mm High Quality @BBL A1M.json"
|
||||
},
|
||||
{
|
||||
"name": "0.12mm High Quality @BBL A1",
|
||||
"sub_path": "process/0.12mm High Quality @BBL A1.json"
|
||||
},
|
||||
{
|
||||
"name": "0.16mm Optimal @BBL X1C",
|
||||
"sub_path": "process/0.16mm Optimal @BBL X1C.json"
|
||||
@@ -235,6 +283,22 @@
|
||||
"name": "0.16mm Optimal @BBL A1",
|
||||
"sub_path": "process/0.16mm Optimal @BBL A1.json"
|
||||
},
|
||||
{
|
||||
"name": "0.16mm High Quality @BBL X1C",
|
||||
"sub_path": "process/0.16mm High Quality @BBL X1C.json"
|
||||
},
|
||||
{
|
||||
"name": "0.16mm High Quality @BBL P1P",
|
||||
"sub_path": "process/0.16mm High Quality @BBL P1P.json"
|
||||
},
|
||||
{
|
||||
"name": "0.16mm High Quality @BBL A1M",
|
||||
"sub_path": "process/0.16mm High Quality @BBL A1M.json"
|
||||
},
|
||||
{
|
||||
"name": "0.16mm High Quality @BBL A1",
|
||||
"sub_path": "process/0.16mm High Quality @BBL A1.json"
|
||||
},
|
||||
{
|
||||
"name": "0.20mm Standard @BBL X1C",
|
||||
"sub_path": "process/0.20mm Standard @BBL X1C.json"
|
||||
@@ -307,6 +371,22 @@
|
||||
"name": "0.06mm Fine @BBL A1 0.2 nozzle",
|
||||
"sub_path": "process/0.06mm Fine @BBL A1 0.2 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "0.06mm High Quality @BBL X1C 0.2 nozzle",
|
||||
"sub_path": "process/0.06mm High Quality @BBL X1C 0.2 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "0.06mm High Quality @BBL P1P 0.2 nozzle",
|
||||
"sub_path": "process/0.06mm High Quality @BBL P1P 0.2 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "0.06mm High Quality @BBL A1M 0.2 nozzle",
|
||||
"sub_path": "process/0.06mm High Quality @BBL A1M 0.2 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "0.06mm High Quality @BBL A1 0.2 nozzle",
|
||||
"sub_path": "process/0.06mm High Quality @BBL A1 0.2 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "0.08mm Standard @BBL X1C 0.2 nozzle",
|
||||
"sub_path": "process/0.08mm Standard @BBL X1C 0.2 nozzle.json"
|
||||
@@ -323,6 +403,22 @@
|
||||
"name": "0.08mm Optimal @BBL A1 0.2 nozzle",
|
||||
"sub_path": "process/0.08mm Optimal @BBL A1 0.2 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "0.08mm High Quality @BBL A1 0.2 nozzle",
|
||||
"sub_path": "process/0.08mm High Quality @BBL A1 0.2 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "0.08mm High Quality @BBL A1M 0.2 nozzle",
|
||||
"sub_path": "process/0.08mm High Quality @BBL A1M 0.2 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "0.08mm High Quality @BBL P1P 0.2 nozzle",
|
||||
"sub_path": "process/0.08mm High Quality @BBL P1P 0.2 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "0.08mm High Quality @BBL X1C 0.2 nozzle",
|
||||
"sub_path": "process/0.08mm High Quality @BBL X1C 0.2 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "0.12mm Standard @BBL X1C 0.2 nozzle",
|
||||
"sub_path": "process/0.12mm Standard @BBL X1C 0.2 nozzle.json"
|
||||
@@ -681,6 +777,10 @@
|
||||
"name": "PolyLite PETG @base",
|
||||
"sub_path": "filament/PolyLite PETG @base.json"
|
||||
},
|
||||
{
|
||||
"name": "Bambu PETG Translucent @base",
|
||||
"sub_path": "filament/Bambu PETG Translucent @base.json"
|
||||
},
|
||||
{
|
||||
"name": "Bambu ABS @base",
|
||||
"sub_path": "filament/Bambu ABS @base.json"
|
||||
@@ -1553,6 +1653,30 @@
|
||||
"name": "PolyLite PETG @BBL A1 0.2 nozzle",
|
||||
"sub_path": "filament/PolyLite PETG @BBL A1 0.2 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Bambu PETG Translucent @BBL X1C",
|
||||
"sub_path": "filament/Bambu PETG Translucent @BBL X1C.json"
|
||||
},
|
||||
{
|
||||
"name": "Bambu PETG Translucent @BBL X1C 0.8 nozzle",
|
||||
"sub_path": "filament/Bambu PETG Translucent @BBL X1C 0.8 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Bambu PETG Translucent @BBL A1M",
|
||||
"sub_path": "filament/Bambu PETG Translucent @BBL A1M.json"
|
||||
},
|
||||
{
|
||||
"name": "Bambu PETG Translucent @BBL A1M 0.8 nozzle",
|
||||
"sub_path": "filament/Bambu PETG Translucent @BBL A1M 0.8 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Bambu PETG Translucent @BBL A1 0.8 nozzle",
|
||||
"sub_path": "filament/Bambu PETG Translucent @BBL A1 0.8 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Bambu PETG Translucent @BBL A1",
|
||||
"sub_path": "filament/Bambu PETG Translucent @BBL A1.json"
|
||||
},
|
||||
{
|
||||
"name": "Bambu ABS @BBL X1C",
|
||||
"sub_path": "filament/Bambu ABS @BBL X1C.json"
|
||||
|
||||
@@ -51,7 +51,7 @@
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
"230"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"90"
|
||||
@@ -59,6 +59,9 @@
|
||||
"overhang_fan_threshold": [
|
||||
"10%"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
|
||||
@@ -0,0 +1,27 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Bambu PETG Translucent @BBL A1 0.8 nozzle",
|
||||
"inherits": "Bambu PETG Translucent @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSG01_04",
|
||||
"instantiation": "true",
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.2"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.8 nozzle",
|
||||
"Bambu Lab A1 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,17 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Bambu PETG Translucent @BBL A1",
|
||||
"inherits": "Bambu PETG Translucent @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSG01_05",
|
||||
"instantiation": "true",
|
||||
"filament_retraction_length": [
|
||||
"0.3"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,27 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Bambu PETG Translucent @BBL A1M 0.8 nozzle",
|
||||
"inherits": "Bambu PETG Translucent @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSG01_03",
|
||||
"instantiation": "true",
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.2"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.6 nozzle",
|
||||
"Bambu Lab A1 mini 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,17 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Bambu PETG Translucent @BBL A1M",
|
||||
"inherits": "Bambu PETG Translucent @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSG01_02",
|
||||
"instantiation": "true",
|
||||
"filament_retraction_length": [
|
||||
"0.3"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,35 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Bambu PETG Translucent @BBL X1C 0.8 nozzle",
|
||||
"inherits": "Bambu PETG Translucent @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSG01_01",
|
||||
"instantiation": "true",
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.2"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.6 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.8 nozzle",
|
||||
"Bambu Lab X1 0.6 nozzle",
|
||||
"Bambu Lab X1 0.8 nozzle",
|
||||
"Bambu Lab P1P 0.6 nozzle",
|
||||
"Bambu Lab P1P 0.8 nozzle",
|
||||
"Bambu Lab P1S 0.6 nozzle",
|
||||
"Bambu Lab P1S 0.8 nozzle",
|
||||
"Bambu Lab X1E 0.6 nozzle",
|
||||
"Bambu Lab X1E 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,21 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Bambu PETG Translucent @BBL X1C",
|
||||
"inherits": "Bambu PETG Translucent @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSG01_00",
|
||||
"instantiation": "true",
|
||||
"filament_retraction_length": [
|
||||
"0.3"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"Bambu Lab X1 0.4 nozzle",
|
||||
"Bambu Lab P1P 0.4 nozzle",
|
||||
"Bambu Lab P1S 0.4 nozzle",
|
||||
"Bambu Lab X1E 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,80 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Bambu PETG Translucent @base",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"from": "system",
|
||||
"filament_id": "GFG01",
|
||||
"instantiation": "false",
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"30"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.25"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"6"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Bambu Lab"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"245"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"230"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"90"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"10%"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
]
|
||||
}
|
||||
@@ -14,6 +14,9 @@
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Bambu Lab"
|
||||
],
|
||||
|
||||
@@ -47,6 +47,9 @@
|
||||
"overhang_fan_threshold": [
|
||||
"10%"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
|
||||
@@ -6,7 +6,7 @@
|
||||
"setting_id": "GFSL99_00",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
"1.6"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.2 nozzle",
|
||||
|
||||
@@ -15,7 +15,7 @@
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
"1.6"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"65"
|
||||
|
||||
@@ -15,7 +15,7 @@
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
"1.6"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
|
||||
@@ -15,7 +15,7 @@
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"1"
|
||||
"1.8"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"65"
|
||||
|
||||
@@ -6,7 +6,7 @@
|
||||
"setting_id": "GFSL05_06",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"1"
|
||||
"1.8"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P1P 0.2 nozzle"
|
||||
|
||||
@@ -6,7 +6,7 @@
|
||||
"setting_id": "GFSL05_04",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"1"
|
||||
"1.8"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P1P 0.2 nozzle"
|
||||
|
||||
@@ -6,7 +6,7 @@
|
||||
"setting_id": "GFSL05_01",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"1"
|
||||
"1.8"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 0.2 nozzle",
|
||||
|
||||
@@ -15,7 +15,7 @@
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"1"
|
||||
"1.6"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
|
||||
@@ -6,13 +6,7 @@
|
||||
"setting_id": "GFSL04_06",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"1"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
"1.6"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.2 nozzle"
|
||||
|
||||
@@ -6,7 +6,7 @@
|
||||
"setting_id": "GFSL04_04",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"1"
|
||||
"1.6"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P1P 0.2 nozzle"
|
||||
|
||||
@@ -6,7 +6,7 @@
|
||||
"setting_id": "GFSL04_02",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"1"
|
||||
"1.6"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.2 nozzle",
|
||||
|
||||
@@ -12,7 +12,7 @@
|
||||
"50"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
"1.6"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"65"
|
||||
|
||||
@@ -12,7 +12,7 @@
|
||||
"50"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"1"
|
||||
"1.6"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"65"
|
||||
|
||||
@@ -12,7 +12,7 @@
|
||||
"50"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"1"
|
||||
"1.8"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"65"
|
||||
|
||||
@@ -12,7 +12,7 @@
|
||||
"50"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"1"
|
||||
"1.8"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"65"
|
||||
|
||||
@@ -44,6 +44,9 @@
|
||||
"overhang_fan_threshold": [
|
||||
"10%"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
|
||||
@@ -15,7 +15,7 @@
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"1"
|
||||
"1.6"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"65"
|
||||
|
||||
@@ -15,7 +15,7 @@
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"1"
|
||||
"1.6"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
|
||||
@@ -6,7 +6,7 @@
|
||||
"setting_id": "GFSL25",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"1"
|
||||
"1.6"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.2 nozzle",
|
||||
|
||||
@@ -15,7 +15,7 @@
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"1"
|
||||
"1.8"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"65"
|
||||
|
||||
@@ -15,7 +15,7 @@
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"1"
|
||||
"1.8"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
|
||||
@@ -6,7 +6,7 @@
|
||||
"setting_id": "GFSL24",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"1"
|
||||
"1.8"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.2 nozzle",
|
||||
|
||||
@@ -15,7 +15,7 @@
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"1"
|
||||
"1.8"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"65"
|
||||
|
||||
@@ -15,7 +15,7 @@
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"1"
|
||||
"1.8"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
|
||||
@@ -6,7 +6,7 @@
|
||||
"setting_id": "GFSL03_01",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"1"
|
||||
"1.8"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.2 nozzle",
|
||||
|
||||
@@ -60,10 +60,9 @@
|
||||
"255"
|
||||
],
|
||||
"scan_first_layer": "0",
|
||||
"upward_compatible_machine": [],
|
||||
"machine_start_gcode": ";===== machine: A1 =========================\n;===== date: 20231211 =====================\nG392 S0\n;M400\n;M73 P1.717\n\n;===== start to heat heatbead&hotend==========\nM1002 gcode_claim_action : 2\nM1002 set_filament_type:{filament_type[initial_no_support_extruder]}\nM104 S140\nM140 S[bed_temperature_initial_layer_single]\n\n;=====start printer sound ===================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A43 B10 L100 C46 D10 M70 E39 F10 N80\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N80\nM1006 A0 B10 L100 C43 D10 M60 E39 F10 N80\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N80\nM1006 A0 B10 L100 C41 D10 M80 E41 F10 N80\nM1006 A0 B10 L100 C44 D10 M80 E44 F10 N80\nM1006 A0 B10 L100 C49 D10 M80 E49 F10 N80\nM1006 A0 B10 L100 C0 D10 M80 E0 F10 N80\nM1006 A44 B10 L100 C48 D10 M60 E39 F10 N80\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N80\nM1006 A0 B10 L100 C44 D10 M80 E39 F10 N80\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N80\nM1006 A43 B10 L100 C46 D10 M60 E39 F10 N80\nM1006 W\nM18\n;=====start printer sound ===================\n\n;=====avoid end stop =================\nG91\nG380 S2 Z40 F1200\nG380 S2 Z-15 F1200\nG90\n\n;===== reset machine status =================\n;M290 X39 Y39 Z8\nM204 S6000\n\nM630 S0 P0\nG91\nM17 Z0.3 ; lower the z-motor current\n\nG90\nM17 X0.65 Y1.2 Z0.6 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\n;M211 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\n\n;====== cog noise reduction=================\nM982.2 S1 ; turn on cog noise reduction\n\nM1002 gcode_claim_action : 13\n\nG28 X\nG91\nG1 Z5 F1200\nG90\nG0 X128 Y0 F30000\nG91\nG1 Z-5 F1200\n\nM109 S10 H140\n\nM17 E0.3\nM83\nG1 E10 F1200\nG1 E-0.5 F30\nM17 D\n\nG28 Z P0 T140; home z with low precision,permit 300deg temperature\nM104 S{nozzle_temperature_initial_layer[initial_extruder]}\n\n;M400\n;M73 P1.717\n\n;===== prepare print temperature and material ==========\nM1002 gcode_claim_action : 24\n\nM400\n;G392 S1\nM211 X0 Y0 Z0 ;turn off soft endstop\nM975 S1 ; turn on\n\nG90\nG1 X-28.5 F30000\nG1 X-48.2 F3000\n\nM620 M ;enable remap\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M1002 gcode_claim_action : 4\n M400\n M1002 set_filament_type:UNKNOWN\n M109 S[nozzle_temperature_initial_layer]\n M104 S250\n M400\n T[initial_no_support_extruder]\n G1 X-48.2 F3000\n M400\n\n M620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n M109 S250 ;set nozzle to common flush temp\n M106 P1 S0\n G92 E0\n G1 E50 F200\n M400\n M1002 set_filament_type:{filament_type[initial_no_support_extruder]}\nM621 S[initial_no_support_extruder]A\n\nM109 S{nozzle_temperature_range_high[initial_no_support_extruder]} H300\nG92 E0\nG1 E50 F200 ; lower extrusion speed to avoid clog\nM400\nM106 P1 S178\nG92 E0\nG1 E5 F200\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG92 E0\nG1 E-0.5 F300\n\nG1 X-28.5 F30000\nG1 X-48.2 F3000\nG1 X-28.5 F30000 ;wipe and shake\nG1 X-48.2 F3000\nG1 X-28.5 F30000 ;wipe and shake\nG1 X-48.2 F3000\n\n;G392 S0\n\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n;M400\n;M73 P1.717\n\n;===== auto extrude cali start =========================\nM975 S1\n;G392 S1\n\nG90\nM83\nT1000\nG1 X-48.2 Y0 Z10 F10000\nM400\nM1002 set_filament_type:UNKNOWN\n\nM412 S1 ; ===turn on filament runout detection===\nM400 P10\nM620.3 W1; === turn on filament tangle detection===\nM400 S2\n\nM1002 set_filament_type:{filament_type[initial_no_support_extruder]}\n\n;M1002 set_flag extrude_cali_flag=1\nM1002 judge_flag extrude_cali_flag\n\nM622 J1\n M1002 gcode_claim_action : 8\n\n M109 S{nozzle_temperature[initial_extruder]}\n G1 E10 F{outer_wall_volumetric_speed/2.4*60}\n M983 F{outer_wall_volumetric_speed/2.4} A0.3 ; cali dynamic extrusion compensation\n\n M106 P1 S255\n M400 S5\n G1 X-28.5 F18000\n G1 X-48.2 F3000\n G1 X-28.5 F18000 ;wipe and shake\n G1 X-48.2 F3000\n G1 X-28.5 F12000 ;wipe and shake\n G1 X-48.2 F3000\n M400\n M106 P1 S0\n\n M1002 judge_last_extrude_cali_success\n M622 J0\n M983 F{outer_wall_volumetric_speed/2.4} A0.3 ; cali dynamic extrusion compensation\n M106 P1 S255\n M400 S5\n G1 X-28.5 F18000\n G1 X-48.2 F3000\n G1 X-28.5 F18000 ;wipe and shake\n G1 X-48.2 F3000\n G1 X-28.5 F12000 ;wipe and shake\n M400\n M106 P1 S0\n M623\nM623 ; end of \"draw extrinsic para cali paint\"\n\n;G392 S0\n;===== auto extrude cali end ========================\n\n;M400\n;M73 P1.717\n\nM104 S170 ; prepare to wipe nozzle\nM106 S255 ; tLine truncated
|
||||
"machine_end_gcode": ";===== date: 20230922 =====================\n;turn off nozzle clog detect\nG392 S0\n\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\nG1 X0 Y{first_layer_center_no_wipe_tower[1]} F18000 ; move to safe pos\nG1 X-13.0 F3000 ; move to safe pos\n{if !spiral_mode && print_sequence != \"by object\"}\nM1002 judge_flag timelapse_record_flag\nM622 J1\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM991 S0 P-1 ;end timelapse at safe pos\nM623\n{endif}\n\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n\n;G1 X27 F15000 ; wipe\n\n; pull back filament to AMS\nM620 S255\nG1 X267 F15000\nT255\nG1 X-28.5 F18000\nG1 X-48.5 F3000\nG1 X-28.5 F18000\nG1 X-48.5 F3000\nM621 S255\n\nM104 S0 ; turn off hotend\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (max_layer_z + 100.0) < 256}\n G1 Z{max_layer_z + 100.0} F600\n G1 Z{max_layer_z +98.0}\n{else}\n G1 Z256 F600\n G1 Z256\n{endif}\nM400 P100\nM17 R ; restore z current\n\nG90\nG1 X-48 Y180 F3600\n\nM220 S100 ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n\n;=====printer finish sound=========\nM17\nM400 S1\nM1006 S1\nM1006 A0 B20 L100 C37 D20 M40 E42 F20 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C46 D10 M80 E46 F10 N80\nM1006 A44 B20 L100 C39 D20 M60 E48 F20 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C39 D10 M60 E39 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C39 D10 M60 E39 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C48 D10 M60 E44 F10 N80\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N80\nM1006 A44 B20 L100 C49 D20 M80 E41 F20 N80\nM1006 A0 B20 L100 C0 D20 M60 E0 F20 N80\nM1006 A0 B20 L100 C37 D20 M30 E37 F20 N60\nM1006 W\n;=====printer finish sound=========\n\n;M17 X0.8 Y0.8 Z0.5 ; lower motor current to 45% power\nM400\nM18\n",
|
||||
"machine_start_gcode": ";===== machine: A1 =========================\n;===== date: 20240104 =====================\nG392 S0\n;M400\n;M73 P1.717\n\n;===== start to heat heatbead&hotend==========\nM1002 gcode_claim_action : 2\nM1002 set_filament_type:{filament_type[initial_no_support_extruder]}\nM104 S140\nM140 S[bed_temperature_initial_layer_single]\n\n;=====start printer sound ===================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A43 B10 L100 C46 D10 M70 E39 F10 N80\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N80\nM1006 A0 B10 L100 C43 D10 M60 E39 F10 N80\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N80\nM1006 A0 B10 L100 C41 D10 M80 E41 F10 N80\nM1006 A0 B10 L100 C44 D10 M80 E44 F10 N80\nM1006 A0 B10 L100 C49 D10 M80 E49 F10 N80\nM1006 A0 B10 L100 C0 D10 M80 E0 F10 N80\nM1006 A44 B10 L100 C48 D10 M60 E39 F10 N80\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N80\nM1006 A0 B10 L100 C44 D10 M80 E39 F10 N80\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N80\nM1006 A43 B10 L100 C46 D10 M60 E39 F10 N80\nM1006 W\nM18\n;=====start printer sound ===================\n\n;=====avoid end stop =================\nG91\nG380 S2 Z40 F1200\nG380 S2 Z-15 F1200\nG90\n\n;===== reset machine status =================\n;M290 X39 Y39 Z8\nM204 S6000\n\nM630 S0 P0\nG91\nM17 Z0.3 ; lower the z-motor current\n\nG90\nM17 X0.65 Y1.2 Z0.6 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\n;M211 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\n\n;====== cog noise reduction=================\nM982.2 S1 ; turn on cog noise reduction\n\nM1002 gcode_claim_action : 13\n\nG28 X\nG91\nG1 Z5 F1200\nG90\nG0 X128 F30000\nG0 Y254 F3000\nG91\nG1 Z-5 F1200\n\nM109 S10 H140\n\nM17 E0.3\nM83\nG1 E10 F1200\nG1 E-0.5 F30\nM17 D\n\nG28 Z P0 T140; home z with low precision,permit 300deg temperature\nM104 S{nozzle_temperature_initial_layer[initial_extruder]}\n\nM1002 judge_flag build_plate_detect_flag\nM622 S1\n G39.4\n G90\n G1 Z5 F1200\nM623\n\n;M400\n;M73 P1.717\n\n;===== prepare print temperature and material ==========\nM1002 gcode_claim_action : 24\n\nM400\n;G392 S1\nM211 X0 Y0 Z0 ;turn off soft endstop\nM975 S1 ; turn on\n\nG90\nG1 X-28.5 F30000\nG1 X-48.2 F3000\n\nM620 M ;enable remap\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M1002 gcode_claim_action : 4\n M400\n M1002 set_filament_type:UNKNOWN\n M109 S[nozzle_temperature_initial_layer]\n M104 S250\n M400\n T[initial_no_support_extruder]\n G1 X-48.2 F3000\n M400\n\n M620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n M109 S250 ;set nozzle to common flush temp\n M106 P1 S0\n G92 E0\n G1 E50 F200\n M400\n M1002 set_filament_type:{filament_type[initial_no_support_extruder]}\nM621 S[initial_no_support_extruder]A\n\nM109 S{nozzle_temperature_range_high[initial_no_support_extruder]} H300\nG92 E0\nG1 E50 F200 ; lower extrusion speed to avoid clog\nM400\nM106 P1 S178\nG92 E0\nG1 E5 F200\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG92 E0\nG1 E-0.5 F300\n\nG1 X-28.5 F30000\nG1 X-48.2 F3000\nG1 X-28.5 F30000 ;wipe and shake\nG1 X-48.2 F3000\nG1 X-28.5 F30000 ;wipe and shake\nG1 X-48.2 F3000\n\n;G392 S0\n\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n;M400\n;M73 P1.717\n\n;===== auto extrude cali start =========================\nM975 S1\n;G392 S1\n\nG90\nM83\nT1000\nG1 X-48.2 Y0 Z10 F10000\nM400\nM1002 set_filament_type:UNKNOWN\n\nM412 S1 ; ===turn on filament runout detection===\nM400 P10\nM620.3 W1; === turn on filament tangle detection===\nM400 S2\n\nM1002 set_filament_type:{filament_type[initial_no_support_extruder]}\n\n;M1002 set_flag extrude_cali_flag=1\nM1002 judge_flag extrude_cali_flag\n\nM622 J1\n M1002 gcode_claim_action : 8\n\n M109 S{nozzle_temperature[initial_extruder]}\n G1 E10 F{outer_wall_volumetric_speed/2.4*60}\n M983 F{outer_wall_volumetric_speed/2.4} A0.3 H[nozzle_diameter]; cali dynamic extrusion compensation\n\n M106 P1 S255\n M400 S5\n G1 X-28.5 F18000\n G1 X-48.2 F3000\n G1 X-28.5 F18000 ;wipe and shake\n G1 X-48.2 F3000\n G1 X-28.5 F12000 ;wipe and shake\n G1 X-48.2 F3000\n M400\n M106 P1 S0\n\n M1002 judge_last_extrude_cali_success\n M622 J0\n M983 F{outer_wall_volumetric_speed/2.4} A0.3 H[nozzle_diameter]; cali dynamic extrusion compensation\n M106 P1 S255\n M400 S5\n G1 X-28.5 F18000\n G1 X-48.2 F3000\n G1 X-28.5 F18000 ;wipe and shake\n G1 X-48.2 F3000\n G1 X-28.5 F12000 ;wipe and shake\n M400\n M106 P1 S0\n M623\n \n G1 X-48.2 F3000\n M400\n M984 A0.1 ELine truncated
|
||||
"machine_end_gcode": ";===== date: 20231229 =====================\nG392 S0 ;turn off nozzle clog detect\n\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\nG1 X0 Y{first_layer_center_no_wipe_tower[1]} F18000 ; move to safe pos\nG1 X-13.0 F3000 ; move to safe pos\n{if !spiral_mode && print_sequence != \"by object\"}\nM1002 judge_flag timelapse_record_flag\nM622 J1\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM991 S0 P-1 ;end timelapse at safe pos\nM623\n{endif}\n\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n\n;G1 X27 F15000 ; wipe\n\n; pull back filament to AMS\nM620 S255\nG1 X267 F15000\nT255\nG1 X-28.5 F18000\nG1 X-48.2 F3000\nG1 X-28.5 F18000\nG1 X-48.2 F3000\nM621 S255\n\nM104 S0 ; turn off hotend\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (max_layer_z + 100.0) < 256}\n G1 Z{max_layer_z + 100.0} F600\n G1 Z{max_layer_z +98.0}\n{else}\n G1 Z256 F600\n G1 Z256\n{endif}\nM400 P100\nM17 R ; restore z current\n\nG90\nG1 X-48 Y180 F3600\n\nM220 S100 ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n\n;=====printer finish sound=========\nM17\nM400 S1\nM1006 S1\nM1006 A0 B20 L100 C37 D20 M40 E42 F20 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C46 D10 M80 E46 F10 N80\nM1006 A44 B20 L100 C39 D20 M60 E48 F20 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C39 D10 M60 E39 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C39 D10 M60 E39 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C48 D10 M60 E44 F10 N80\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N80\nM1006 A44 B20 L100 C49 D20 M80 E41 F20 N80\nM1006 A0 B20 L100 C0 D20 M60 E0 F20 N80\nM1006 A0 B20 L100 C37 D20 M30 E37 F20 N60\nM1006 W\n;=====printer finish sound=========\n\n;M17 X0.8 Y0.8 Z0.5 ; lower motor current to 45% power\nM400\nM18 X Y Z\n\n",
|
||||
"layer_change_gcode": "; layer num/total_layer_count: {layer_num+1}/[total_layer_count]\n; update layer progress\nM73 L{layer_num+1}\nM991 S0 P{layer_num} ;notify layer change",
|
||||
"time_lapse_gcode": ";===================== date: 20231107 =====================\n{if !spiral_mode && print_sequence != \"by object\"}\n; don't support timelapse gcode in spiral_mode and by object sequence for I3 structure printer\nM622.1 S1 ; for prev firware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\nG92 E0\nG17\nG2 Z{layer_z + 0.4} I0.86 J0.86 P1 F20000 ; spiral lift a little\nG1 Z{max_layer_z + 0.4}\nG1 X0 Y{first_layer_center_no_wipe_tower[1]} F18000 ; move to safe pos\nG1 X-48.2 F3000 ; move to safe pos\nM400 P300\nM971 S11 C11 O0\nG92 E0\nG1 X0 F18000\nM623\n\n; enable nozzle clog detect at 3rd layer\n{if layer_num == 2}\n M400\n G90\n M83\n M204 S5000\n G0 Z2 F4000\n G0 X-4.2 Y240 F20000\n M400 P200\n G39 S1\n G0 Z2 F4000\n G0 X128 Y128 F30000\n{endif}\n{endif}",
|
||||
"change_filament_gcode": ";===== machine: A1 =========================\n;===== date: 20231012 =======================\nG392 S0\nM620 S[next_extruder]A\nM204 S9000\n{if toolchange_count > 1}\nG17\nG2 Z{max_layer_z + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\n{endif}\nG1 Z{max_layer_z + 3.0} F1200\n\nM400\nM106 P1 S0\nM106 P2 S0\n{if old_filament_temp > 142 && next_extruder < 255}\nM104 S[old_filament_temp]\n{endif}\n\nG1 X267 F18000\n;{if toolchange_count == 2}\n; get travel path for change filament\n;M620.1 X[travel_point_1_x] Y[travel_point_1_y] F21000 P0\n;M620.1 X[travel_point_2_x] Y[travel_point_2_y] F21000 P1\n;M620.1 X[travel_point_3_x] Y[travel_point_3_y] F21000 P2\n;{endif}\nM620.1 E F[old_filament_e_feedrate] T{nozzle_temperature_range_high[previous_extruder]}\nT[next_extruder]\nM620.1 E F[new_filament_e_feedrate] T{nozzle_temperature_range_high[next_extruder]}\n\nG1 Y128 F9000\n\n{if next_extruder < 255}\nM400\n\nG92 E0\n{if flush_length_1 > 1}\n; FLUSH_START\n; always use highest temperature to flush\nM400\nM1002 set_filament_type:UNKNOWN\nM109 S[nozzle_temperature_range_high]\nM106 P1 S60\n{if flush_length_1 > 23.7}\nG1 E23.7 F{old_filament_e_feedrate} ; do not need pulsatile flushing for start part\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{old_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\n{else}\nG1 E{flush_length_1} F{old_filament_e_feedrate}\n{endif}\n; FLUSH_END\nG1 E-[old_retract_length_toolchange] F1800\nG1 E[old_retract_length_toolchange] F300\nM400\nM1002 set_filament_type:{filament_type[next_extruder]}\n{endif}\n\n{if flush_length_1 > 45 && flush_length_2 > 1}\n; WIPE\nM400\nM106 P1 S178\nM400 S3\nG1 X-38.5 F18000\nG1 X-48.5 F3000\nG1 X-38.5 F18000\nG1 X-48.5 F3000\nG1 X-38.5 F18000\nG1 X-48.5 F3000\nM400\nM106 P1 S0\n{endif}\n\n{if flush_length_2 > 1}\nM106 P1 S60\n; FLUSH_START\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_2 > 45 && flush_length_3 > 1}\n; WIPE\nM400\nM106 P1 S178\nM400 S3\nG1 X-38.5 F18000\nG1 X-48.5 F3000\nG1 X-38.5 F18000\nG1 X-48.5 F3000\nG1 X-38.5 F18000\nG1 X-48.5 F3000\nM400\nM106 P1 S0\n{endif}\n\n{if flush_length_3 > 1}\nM106 P1 S60\n; FLUSH_START\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_3 > 45 && flush_length_4 > 1}\n; WIPE\nM400\nM106 P1 S178\nM400 S3\nG1 X-38.5 F18000\nG1 X-48.5 F3000\nG1 X-38.5 F18000\nG1 X-48.5 F3000\nG1 X-38.5 F18000\nG1 X-48.5 F3000\nM400\nM106 P1 S0\n{endif}\n\n{if flush_length_4 > 1}\nM106 P1 S60\n; FLUSH_START\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\n; FLUSH_END\n{endif}\n\nM400\nM106 P1 S60\nM109 S[new_filament_temp]\nG1 E6 F{new_filament_e_feedrate} ;Compensate for filament spillage during waiting temperature\nM400\nG92 E0\nG1 E-[new_retract_length_toolchange] F1800\nM400\nM106 P1 S178\nM400 S3\nG1 X-38.5 F18000\nG1 X-48.5 F3000\nG1 X-38.5 F18000\nG1 X-48.5 F3000\nG1 X-38.5 F18000\nG1 X-48.5 F3000\nG1 X-38.5 F18000\nM400\nG1 Z{max_layer_z + 3.0} F3000\nM106 P1 S0\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\nM621 S[next_extruder]A\nG392 S1\n"
|
||||
"change_filament_gcode": ";===== machine: A1 =========================\n;===== date: 20231225 =======================\nM1007 S0 ; turn off mass estimation\nG392 S0\nM620 S[next_extruder]A\nM204 S9000\n{if toolchange_count > 1}\nG17\nG2 Z{max_layer_z + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\n{endif}\nG1 Z{max_layer_z + 3.0} F1200\n\nM400\nM106 P1 S0\nM106 P2 S0\n{if old_filament_temp > 142 && next_extruder < 255}\nM104 S[old_filament_temp]\n{endif}\n\nG1 X267 F18000\nM620.1 E F[old_filament_e_feedrate] T{nozzle_temperature_range_high[previous_extruder]}\nM620.10 A0 F[old_filament_e_feedrate]\nT[next_extruder]\nM620.1 E F[new_filament_e_feedrate] T{nozzle_temperature_range_high[next_extruder]}\nM620.10 A1 F[new_filament_e_feedrate] L[flush_length] H[nozzle_diameter] T[nozzle_temperature_range_high]\n\nG1 Y128 F9000\n\n{if next_extruder < 255}\nM400\n\nG92 E0\nM628 S0\n\n{if flush_length_1 > 1}\n; FLUSH_START\n; always use highest temperature to flush\nM400\nM1002 set_filament_type:UNKNOWN\nM109 S[nozzle_temperature_range_high]\nM106 P1 S60\n{if flush_length_1 > 23.7}\nG1 E23.7 F{old_filament_e_feedrate} ; do not need pulsatile flushing for start part\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{old_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\n{else}\nG1 E{flush_length_1} F{old_filament_e_feedrate}\n{endif}\n; FLUSH_END\nG1 E-[old_retract_length_toolchange] F1800\nG1 E[old_retract_length_toolchange] F300\nM400\nM1002 set_filament_type:{filament_type[next_extruder]}\n{endif}\n\n{if flush_length_1 > 45 && flush_length_2 > 1}\n; WIPE\nM400\nM106 P1 S178\nM400 S3\nG1 X-38.2 F18000\nG1 X-48.2 F3000\nG1 X-38.2 F18000\nG1 X-48.2 F3000\nG1 X-38.2 F18000\nG1 X-48.2 F3000\nM400\nM106 P1 S0\n{endif}\n\n{if flush_length_2 > 1}\nM106 P1 S60\n; FLUSH_START\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_2 > 45 && flush_length_3 > 1}\n; WIPE\nM400\nM106 P1 S178\nM400 S3\nG1 X-38.2 F18000\nG1 X-48.2 F3000\nG1 X-38.2 F18000\nG1 X-48.2 F3000\nG1 X-38.2 F18000\nG1 X-48.2 F3000\nM400\nM106 P1 S0\n{endif}\n\n{if flush_length_3 > 1}\nM106 P1 S60\n; FLUSH_START\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_3 > 45 && flush_length_4 > 1}\n; WIPE\nM400\nM106 P1 S178\nM400 S3\nG1 X-38.2 F18000\nG1 X-48.2 F3000\nG1 X-38.2 F18000\nG1 X-48.2 F3000\nG1 X-38.2 F18000\nG1 X-48.2 F3000\nM400\nM106 P1 S0\n{endif}\n\n{if flush_length_4 > 1}\nM106 P1 S60\n; FLUSH_START\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\n; FLUSH_END\n{endif}\n\nM629\n\nM400\nM106 P1 S60\nM109 S[new_filament_temp]\nG1 E6 F{new_filament_e_feedrate} ;Compensate for filament spillage during waiting temperature\nM400\nG92 E0\nG1 E-[new_retract_length_toolchange] F1800\nM400\nM106 P1 S178\nM400 S3\nG1 X-38.2 F18000\nG1 X-48.2 F3000\nG1 X-38.2 F18000\nG1 X-48.2 F3000\nG1 X-38.2 F18000\nG1 X-48.2 F3000\nG1 X-38.2 F18000\nM400\nG1 Z{max_layer_z + 3.0} F3000\nM106 P1 S0\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\nM621 S[next_extruder]A\nG392 S0\n\nM1007 S1\n"
|
||||
}
|
||||
@@ -10,7 +10,7 @@
|
||||
],
|
||||
"printer_model": "Bambu Lab A1 mini",
|
||||
"printer_variant": "0.4",
|
||||
"auxiliary_fan": "1",
|
||||
"auxiliary_fan": "0",
|
||||
"bed_exclude_area": [],
|
||||
"best_object_pos": "0.7x0.5",
|
||||
"default_filament_profile": [
|
||||
@@ -66,9 +66,9 @@
|
||||
"Bambu Lab X1E 0.4 nozzle",
|
||||
"Bambu Lab A1 0.4 nozzle"
|
||||
],
|
||||
"machine_start_gcode": ";===== machine: A1 mini =========================\n;===== date: 20231201 =====================\n\n;===== start to heat heatbead&hotend==========\nM1002 gcode_claim_action : 2\nM1002 set_filament_type:{filament_type[initial_no_support_extruder]}\nM104 S170\nM140 S[bed_temperature_initial_layer_single]\nG392 S0 ;turn off clog detect\n;=====start printer sound ===================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B0 L100 C37 D10 M100 E37 F10 N100\nM1006 A0 B0 L100 C41 D10 M100 E41 F10 N100\nM1006 A0 B0 L100 C44 D10 M100 E44 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A43 B10 L100 C39 D10 M100 E46 F10 N100\nM1006 A0 B0 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B0 L100 C39 D10 M100 E43 F10 N100\nM1006 A0 B0 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B0 L100 C41 D10 M100 E41 F10 N100\nM1006 A0 B0 L100 C44 D10 M100 E44 F10 N100\nM1006 A0 B0 L100 C49 D10 M100 E49 F10 N100\nM1006 A0 B0 L100 C0 D10 M100 E0 F10 N100\nM1006 A44 B10 L100 C39 D10 M100 E48 F10 N100\nM1006 A0 B0 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B0 L100 C39 D10 M100 E44 F10 N100\nM1006 A0 B0 L100 C0 D10 M100 E0 F10 N100\nM1006 A43 B10 L100 C39 D10 M100 E46 F10 N100\nM1006 W\nM18\n;=====avoid end stop =================\nG91\nG380 S2 Z30 F1200\nG380 S2 Z-20 F1200\nG1 Z5 F1200\nG90\n\n;===== reset machine status =================\nM290 X39 Y39 Z8\nM204 S6000\n\nM630 S0 P0\nG91\nM17 Z0.3 ; lower the z-motor current\n\nG90\nM17 X0.7 Y0.9 Z0.5 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM83\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\n;====== cog noise reduction=================\nM982.2 S1 ; turn on cog noise reduction\n\n;===== prepare print temperature and material ==========\nM400\nM18\nM109 S100 H170\nM104 S170\nM400\nM17\nM400\nG28 X\n\nM211 X0 Y0 Z0 ;turn off soft endstop ; turn off soft endstop to prevent protential logic problem\n\nM975 S1 ; turn on\n\nG1 X0.0 F30000\nG1 X-13.5 F3000\n\nM620 M ;enable remap\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n G392 S0 ;turn on clog detect\n M1002 gcode_claim_action : 4\n M400\n M1002 set_filament_type:UNKNOWN\n M109 S[nozzle_temperature_initial_layer]\n M104 S250\n M400\n T[initial_no_support_extruder]\n G1 X-13.5 F3000\n M400\n M620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n M109 S250 ;set nozzle to common flush temp\n M106 P1 S0\n G92 E0\n G1 E50 F200\n M400\n M1002 set_filament_type:{filament_type[initial_no_support_extruder]}\n M104 S{nozzle_temperature_range_high[initial_no_support_extruder]}\n G92 E0\n G1 E50 F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60}\n M400\n M106 P1 S178\n G92 E0\n G1 E5 F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60}\n M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\n M104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-40}\n G92 E0\n G1 E-0.5 F300\n\n G1 X0 F30000\n G1 X-13.5 F3000\n G1 X0 F30000 ;wipe and shake\n G1 X-13.5 F3000\n G1 X0 F12000 ;wipe and shake\n G1 X0 F30000\n G1 X-13.5 F3000\n M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-40}\n G392 S0 ;turn off clog detect\nM621 S[initial_no_support_extruder]A\n\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== mech mode fast check============================\nM1002 gcode_claim_action : 3\nG0 X25 Y175 F20000 ; find a soft place to home\n;M104 S0\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nM104 S170\n\n; build plate detect\nG39.4\nM400\n\nG1 Z5 F3000\nG1 X90 Y-1 F30000\nM400 P200\nM970.3 Q1 A7 K0 O2\nM974 Q1 S2 P0\n\nG1 X90 Y0 Z5 F30000\nM400 P200\nM970 Q0 A10 B50 C90 H15 K0 M20 O3\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X-1 Y10\nG28 X ; re-home XY\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\n\nM104 S170 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\nM211 S; push soft endstop status\nM211 X0 Y0 Z0 ;turn off Z axis endstop\n\nM83\nG1 E-1 F500\nG90\nM83\n\nM109 S170\nM104 S140\nG0 X90 Y-4 F30000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X91 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X92 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X93 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X94 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X95 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X96 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X97 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X98 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X99 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X99 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X99 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X99 F10000\nG380Line truncated
|
||||
"machine_end_gcode": ";===== date: 20231201 =====================\n;turn off nozzle clog detect\nG392 S0\n\n{if timelapse_type == 2}\nM991 S0 P-1 ;end timelapse immediately\n{endif}\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\nG1 X0 F12000 ; move to safe pos \n{if timelapse_type == 1}\nM991 S0 P-1 ;end timelapse at safe pos\n{endif}\n\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n\n;G1 X27 F15000 ; wipe\n\n; pull back filament to AMS\nM620 S255\nG1 X181 F12000\nT255\nG1 X0 F18000\nG1 X-13.0 F3000\nG1 X0 F18000 ; wipe\nM621 S255\n\nM104 S0 ; turn off hotend\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (max_layer_z + 100.0) < 180}\n G1 Z{max_layer_z + 100.0} F600\n G1 Z{max_layer_z +98.0}\n{else}\n G1 Z180 F600\n G1 Z180\n{endif}\nM400 P100\nM17 R ; restore z current\n\nG90\nG1 X-13 Y180 F3600\n\nG91\nG1 Z-1 F600\nG90\nM83\n\nM220 S100 ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n\n;=====printer finish sound=========\nM17\nM400 S1\nM1006 S1\nM1006 A0 B20 L100 C37 D20 M100 E42 F20 N100\nM1006 A0 B10 L100 C44 D10 M100 E44 F10 N100\nM1006 A0 B10 L100 C46 D10 M100 E46 F10 N100\nM1006 A44 B20 L100 C39 D20 M100 E48 F20 N100\nM1006 A0 B10 L100 C44 D10 M100 E44 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B10 L100 C39 D10 M100 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B10 L100 C44 D10 M100 E44 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B10 L100 C39 D10 M100 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E48 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A44 B20 L100 C41 D20 M100 E49 F20 N100\nM1006 A0 B20 L100 C0 D20 M100 E0 F20 N100\nM1006 A0 B20 L100 C37 D20 M100 E37 F20 N100\nM1006 W\n;=====printer finish sound=========\nM400 S1\nM18\n",
|
||||
"machine_start_gcode": ";===== machine: A1 mini =========================\n;===== date: 20231226 =====================\n\n;===== start to heat heatbead&hotend==========\nM1002 gcode_claim_action : 2\nM1002 set_filament_type:{filament_type[initial_no_support_extruder]}\nM104 S170\nM140 S[bed_temperature_initial_layer_single]\nG392 S0 ;turn off clog detect\n;=====start printer sound ===================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B0 L100 C37 D10 M100 E37 F10 N100\nM1006 A0 B0 L100 C41 D10 M100 E41 F10 N100\nM1006 A0 B0 L100 C44 D10 M100 E44 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A43 B10 L100 C39 D10 M100 E46 F10 N100\nM1006 A0 B0 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B0 L100 C39 D10 M100 E43 F10 N100\nM1006 A0 B0 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B0 L100 C41 D10 M100 E41 F10 N100\nM1006 A0 B0 L100 C44 D10 M100 E44 F10 N100\nM1006 A0 B0 L100 C49 D10 M100 E49 F10 N100\nM1006 A0 B0 L100 C0 D10 M100 E0 F10 N100\nM1006 A44 B10 L100 C39 D10 M100 E48 F10 N100\nM1006 A0 B0 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B0 L100 C39 D10 M100 E44 F10 N100\nM1006 A0 B0 L100 C0 D10 M100 E0 F10 N100\nM1006 A43 B10 L100 C39 D10 M100 E46 F10 N100\nM1006 W\nM18\n;=====avoid end stop =================\nG91\nG380 S2 Z30 F1200\nG380 S2 Z-20 F1200\nG1 Z5 F1200\nG90\n\n;===== reset machine status =================\nM290 X39 Y39 Z8\nM204 S6000\n\nM630 S0 P0\nG91\nM17 Z0.3 ; lower the z-motor current\n\nG90\nM17 X0.7 Y0.9 Z0.5 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM83\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\n;====== cog noise reduction=================\nM982.2 S1 ; turn on cog noise reduction\n\n;===== prepare print temperature and material ==========\nM400\nM18\nM109 S100 H170\nM104 S170\nM400\nM17\nM400\nG28 X\n\nM211 X0 Y0 Z0 ;turn off soft endstop ; turn off soft endstop to prevent protential logic problem\n\nM975 S1 ; turn on\n\nG1 X0.0 F30000\nG1 X-13.5 F3000\n\nM620 M ;enable remap\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n G392 S0 ;turn on clog detect\n M1002 gcode_claim_action : 4\n M400\n M1002 set_filament_type:UNKNOWN\n M109 S[nozzle_temperature_initial_layer]\n M104 S250\n M400\n T[initial_no_support_extruder]\n G1 X-13.5 F3000\n M400\n M620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n M109 S250 ;set nozzle to common flush temp\n M106 P1 S0\n G92 E0\n G1 E50 F200\n M400\n M1002 set_filament_type:{filament_type[initial_no_support_extruder]}\n M104 S{nozzle_temperature_range_high[initial_no_support_extruder]}\n G92 E0\n G1 E50 F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60}\n M400\n M106 P1 S178\n G92 E0\n G1 E5 F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60}\n M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\n M104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-40}\n G92 E0\n G1 E-0.5 F300\n\n G1 X0 F30000\n G1 X-13.5 F3000\n G1 X0 F30000 ;wipe and shake\n G1 X-13.5 F3000\n G1 X0 F12000 ;wipe and shake\n G1 X0 F30000\n G1 X-13.5 F3000\n M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-40}\n G392 S0 ;turn off clog detect\nM621 S[initial_no_support_extruder]A\n\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== mech mode fast check============================\nM1002 gcode_claim_action : 3\nG0 X25 Y175 F20000 ; find a soft place to home\n;M104 S0\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nM104 S170\n\n; build plate detect\nM1002 judge_flag build_plate_detect_flag\nM622 S1\n G39.4\n M400\nM623\n\nG1 Z5 F3000\nG1 X90 Y-1 F30000\nM400 P200\nM970.3 Q1 A7 K0 O2\nM974 Q1 S2 P0\n\nG1 X90 Y0 Z5 F30000\nM400 P200\nM970 Q0 A10 B50 C90 H15 K0 M20 O3\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X-1 Y10\nG28 X ; re-home XY\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\n\nM104 S170 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\nM211 S; push soft endstop status\nM211 X0 Y0 Z0 ;turn off Z axis endstop\n\nM83\nG1 E-1 F500\nG90\nM83\n\nM109 S170\nM104 S140\nG0 X90 Y-4 F30000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X91 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X92 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X93 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X94 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X95 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X96 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X97 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X98 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X99 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X99 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X9Line truncated
|
||||
"machine_end_gcode": ";===== date: 20231229 =====================\n;turn off nozzle clog detect\nG392 S0\n\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\nG1 X0 Y{first_layer_center_no_wipe_tower[1]} F18000 ; move to safe pos\nG1 X-13.0 F3000 ; move to safe pos\n{if !spiral_mode && print_sequence != \"by object\"}\nM1002 judge_flag timelapse_record_flag\nM622 J1\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM991 S0 P-1 ;end timelapse at safe pos\nM623\n{endif}\n\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n\n;G1 X27 F15000 ; wipe\n\n; pull back filament to AMS\nM620 S255\nG1 X181 F12000\nT255\nG1 X0 F18000\nG1 X-13.0 F3000\nG1 X0 F18000 ; wipe\nM621 S255\n\nM104 S0 ; turn off hotend\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (max_layer_z + 100.0) < 180}\n G1 Z{max_layer_z + 100.0} F600\n G1 Z{max_layer_z +98.0}\n{else}\n G1 Z180 F600\n G1 Z180\n{endif}\nM400 P100\nM17 R ; restore z current\n\nG90\nG1 X-13 Y180 F3600\n\nG91\nG1 Z-1 F600\nG90\nM83\n\nM220 S100 ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n\n;=====printer finish sound=========\nM17\nM400 S1\nM1006 S1\nM1006 A0 B20 L100 C37 D20 M100 E42 F20 N100\nM1006 A0 B10 L100 C44 D10 M100 E44 F10 N100\nM1006 A0 B10 L100 C46 D10 M100 E46 F10 N100\nM1006 A44 B20 L100 C39 D20 M100 E48 F20 N100\nM1006 A0 B10 L100 C44 D10 M100 E44 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B10 L100 C39 D10 M100 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B10 L100 C44 D10 M100 E44 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B10 L100 C39 D10 M100 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E48 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A44 B20 L100 C41 D20 M100 E49 F20 N100\nM1006 A0 B20 L100 C0 D20 M100 E0 F20 N100\nM1006 A0 B20 L100 C37 D20 M100 E37 F20 N100\nM1006 W\n;=====printer finish sound=========\nM400 S1\nM18 X Y Z\n",
|
||||
"layer_change_gcode": "; layer num/total_layer_count: {layer_num+1}/[total_layer_count]\n; update layer progress\nM73 L{layer_num+1}\nM991 S0 P{layer_num} ;notify layer change\n",
|
||||
"time_lapse_gcode": ";===================== date: 20231201 =====================\n{if !spiral_mode && print_sequence != \"by object\"}\n; don't support timelapse gcode in spiral_mode and by object sequence for I3 structure printer\nM622.1 S1 ; for prev firware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\nG92 E0\nG17\nG2 Z{layer_z + 0.4} I0.86 J0.86 P1 F20000 ; spiral lift a little\nG1 Z{max_layer_z + 0.4}\nG1 X0 Y{first_layer_center_no_wipe_tower[1]} F18000 ; move to safe pos\nG1 X-13.0 F3000 ; move to safe pos\nM400 P300\nM971 S11 C11 O0\nG92 E0\nG1 X0 F18000\nG1 Y178\nM623\n\nM622.1 S1\nM1002 judge_flag g39_detection_flag\nM622 J1\n ; enable nozzle clog detect at 3rd layer\n {if layer_num == 2}\n M400\n G90\n M83\n M204 S5000\n G0 Z2 F4000\n G0 X-6 Y170 F20000\n G39 S1 X-6 Y170\n G0 Z2 F4000\n G0 X90 Y90 F30000\n {endif}\n\n\n {if !in_head_wrap_detect_zone}\n M622.1 S0\n M1002 judge_flag g39_mass_exceed_flag\n M622 J1\n {if layer_num > 2}\n G392 S0\n M400\n G90\n M83\n M204 S5000\n G0 Z{max_layer_z + 0.4} F4000\n G39.3 S1\n G0 Z{max_layer_z + 0.4} F4000\n G392 S0\n {endif}\n M623\n {endif}\nM623\n{endif}\n\n",
|
||||
"change_filament_gcode": ";===== machine: A1 mini =========================\n;===== date: 20231201 =======================\nG392 S0\nM1007 S0\nM620 S[next_extruder]A\nM204 S9000\n{if toolchange_count > 1}\nG17\nG2 Z{max_layer_z + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\n{endif}\nG1 Z{max_layer_z + 3.0} F1200\n\nM400\nM106 P1 S0\nM106 P2 S0\n{if old_filament_temp > 142 && next_extruder < 255}\nM104 S[old_filament_temp]\n{endif}\n\nG1 X180 F18000\n;{if toolchange_count == 2}\n; get travel path for change filament\n;M620.1 X[travel_point_1_x] Y[travel_point_1_y] F21000 P0\n;M620.1 X[travel_point_2_x] Y[travel_point_2_y] F21000 P1\n;M620.1 X[travel_point_3_x] Y[travel_point_3_y] F21000 P2\n;{endif}\nM620.1 E F[old_filament_e_feedrate] T{nozzle_temperature_range_high[previous_extruder]}\nT[next_extruder]\nM620.1 E F[new_filament_e_feedrate] T{nozzle_temperature_range_high[next_extruder]}\n\nG1 Y90 F9000\n\n{if next_extruder < 255}\nM400\n\nG92 E0\n{if flush_length_1 > 1}\n; FLUSH_START\n; always use highest temperature to flush\nM400\nM1002 set_filament_type:UNKNOWN\nM109 S[nozzle_temperature_range_high]\nM106 P1 S60\n{if flush_length_1 > 23.7}\nG1 E23.7 F{old_filament_e_feedrate} ; do not need pulsatile flushing for start part\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{old_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\n{else}\nG1 E{flush_length_1} F{old_filament_e_feedrate}\n{endif}\n; FLUSH_END\nG1 E-[old_retract_length_toolchange] F1800\nG1 E[old_retract_length_toolchange] F300\nM400\nM1002 set_filament_type:{filament_type[next_extruder]}\n{endif}\n\n{if flush_length_1 > 45 && flush_length_2 > 1}\n; WIPE\nM400\nM106 P1 S178\nM400 S3\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nM400\nM106 P1 S0\n{endif}\n\n{if flush_length_2 > 1}\nM106 P1 S60\n; FLUSH_START\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_2 > 45 && flush_length_3 > 1}\n; WIPE\nM400\nM106 P1 S178\nM400 S3\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nM400\nM106 P1 S0\n{endif}\n\n{if flush_length_3 > 1}\nM106 P1 S60\n; FLUSH_START\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_3 > 45 && flush_length_4 > 1}\n; WIPE\nM400\nM106 P1 S178\nM400 S3\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nM400\nM106 P1 S0\n{endif}\n\n{if flush_length_4 > 1}\nM106 P1 S60\n; FLUSH_START\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\n; FLUSH_END\n{endif}\n\nM400\nM106 P1 S60\nM109 S[new_filament_temp]\nG1 E5 F{new_filament_e_feedrate} ;Compensate for filament spillage during waiting temperature\nM400\nG92 E0\nG1 E-[new_retract_length_toolchange] F1800\nM400\nM106 P1 S178\nM400 S3\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nM400\nG1 Z{max_layer_z + 3.0} F3000\nM106 P1 S0\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\nM621 S[next_extruder]A\nG392 S0\nM1007 S1\n\nLine truncated
|
||||
"time_lapse_gcode": ";===================== date: 202312028 =====================\n{if !spiral_mode && print_sequence != \"by object\"}\n; don't support timelapse gcode in spiral_mode and by object sequence for I3 structure printer\nM622.1 S1 ; for prev firware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\nG92 E0\nG17\nG2 Z{layer_z + 0.4} I0.86 J0.86 P1 F20000 ; spiral lift a little\nG1 Z{max_layer_z + 0.4}\nG1 X0 Y{first_layer_center_no_wipe_tower[1]} F18000 ; move to safe pos\nG1 X-13.0 F3000 ; move to safe pos\nM400 P300\nM971 S11 C11 O0\nG92 E0\nG1 X0 F18000\nM623\n\nM622.1 S1\nM1002 judge_flag g39_detection_flag\nM622 J1\n ; enable nozzle clog detect at 3rd layer\n {if layer_num == 2}\n M400\n G90\n M83\n M204 S5000\n G0 Z2 F4000\n G0 X-6 Y170 F20000\n G39 S1 X-6 Y170\n G0 Z2 F4000\n G0 X90 Y90 F30000\n {endif}\n\n\n {if !in_head_wrap_detect_zone}\n M622.1 S0\n M1002 judge_flag g39_mass_exceed_flag\n M622 J1\n {if layer_num > 2}\n G392 S0\n M400\n G90\n M83\n M204 S5000\n G0 Z{max_layer_z + 0.4} F4000\n G39.3 S1\n G0 Z{max_layer_z + 0.4} F4000\n G392 S0\n {endif}\n M623\n {endif}\nM623\n{endif}\n",
|
||||
"change_filament_gcode": ";===== machine: A1 mini =========================\n;===== date: 20231225 =======================\nG392 S0\nM1007 S0\nM620 S[next_extruder]A\nM204 S9000\n{if toolchange_count > 1}\nG17\nG2 Z{max_layer_z + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\n{endif}\nG1 Z{max_layer_z + 3.0} F1200\n\nM400\nM106 P1 S0\nM106 P2 S0\n{if old_filament_temp > 142 && next_extruder < 255}\nM104 S[old_filament_temp]\n{endif}\n\nG1 X180 F18000\nM620.1 E F[old_filament_e_feedrate] T{nozzle_temperature_range_high[previous_extruder]}\nM620.10 A0 F[old_filament_e_feedrate]\nT[next_extruder]\nM620.1 E F[new_filament_e_feedrate] T{nozzle_temperature_range_high[next_extruder]}\nM620.10 A1 F[new_filament_e_feedrate] L[flush_length] H[nozzle_diameter] T[nozzle_temperature_range_high]\n\nG1 Y90 F9000\n\n{if next_extruder < 255}\nM400\n\nG92 E0\nM628 S0\n\n{if flush_length_1 > 1}\n; FLUSH_START\n; always use highest temperature to flush\nM400\nM1002 set_filament_type:UNKNOWN\nM109 S[nozzle_temperature_range_high]\nM106 P1 S60\n{if flush_length_1 > 23.7}\nG1 E23.7 F{old_filament_e_feedrate} ; do not need pulsatile flushing for start part\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{old_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\n{else}\nG1 E{flush_length_1} F{old_filament_e_feedrate}\n{endif}\n; FLUSH_END\nG1 E-[old_retract_length_toolchange] F1800\nG1 E[old_retract_length_toolchange] F300\nM400\nM1002 set_filament_type:{filament_type[next_extruder]}\n{endif}\n\n{if flush_length_1 > 45 && flush_length_2 > 1}\n; WIPE\nM400\nM106 P1 S178\nM400 S3\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nM400\nM106 P1 S0\n{endif}\n\n{if flush_length_2 > 1}\nM106 P1 S60\n; FLUSH_START\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_2 > 45 && flush_length_3 > 1}\n; WIPE\nM400\nM106 P1 S178\nM400 S3\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nM400\nM106 P1 S0\n{endif}\n\n{if flush_length_3 > 1}\nM106 P1 S60\n; FLUSH_START\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_3 > 45 && flush_length_4 > 1}\n; WIPE\nM400\nM106 P1 S178\nM400 S3\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nM400\nM106 P1 S0\n{endif}\n\n{if flush_length_4 > 1}\nM106 P1 S60\n; FLUSH_START\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\n; FLUSH_END\n{endif}\n\nM629\n\nM400\nM106 P1 S60\nM109 S[new_filament_temp]\nG1 E5 F{new_filament_e_feedrate} ;Compensate for filament spillage during waiting temperature\nM400\nG92 E0\nG1 E-[new_retract_length_toolchange] F1800\nM400\nM106 P1 S178\nM400 S3\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nM400\nG1 Z{max_layer_z + 3.0} F3000\nM106 P1 S0\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\nM621 S[next_extruder]A\nG392 S0\nM1007 S1\n"
|
||||
}
|
||||
@@ -4,6 +4,7 @@
|
||||
"nozzle_diameter": "0.4;0.2;0.6;0.8",
|
||||
"bed_model": "bbl-3dp-A1M.stl",
|
||||
"bed_texture": "bbl-3dp-logo.svg",
|
||||
"default_bed_type": "Textured PEI Plate",
|
||||
"family": "BBL-3DP",
|
||||
"machine_tech": "FFF",
|
||||
"model_id": "N1",
|
||||
|
||||
@@ -4,6 +4,7 @@
|
||||
"nozzle_diameter": "0.4;0.2;0.6;0.8",
|
||||
"bed_model": "bbl-3dp-X1.stl",
|
||||
"bed_texture": "bbl-3dp-logo.svg",
|
||||
"default_bed_type": "Textured PEI Plate",
|
||||
"family": "BBL-3DP",
|
||||
"machine_tech": "FFF",
|
||||
"model_id": "N2S",
|
||||
|
||||
@@ -4,6 +4,7 @@
|
||||
"nozzle_diameter": "0.4;0.2;0.6;0.8",
|
||||
"bed_model": "bbl-3dp-X1.stl",
|
||||
"bed_texture": "bbl-3dp-logo.svg",
|
||||
"default_bed_type": "Textured PEI Plate",
|
||||
"family": "BBL-3DP",
|
||||
"machine_tech": "FFF",
|
||||
"model_id": "C11",
|
||||
|
||||
@@ -4,6 +4,7 @@
|
||||
"nozzle_diameter": "0.4;0.2;0.6;0.8",
|
||||
"bed_model": "bbl-3dp-X1.stl",
|
||||
"bed_texture": "bbl-3dp-logo.svg",
|
||||
"default_bed_type": "Textured PEI Plate",
|
||||
"family": "BBL-3DP",
|
||||
"machine_tech": "FFF",
|
||||
"model_id": "C12",
|
||||
|
||||
@@ -10,7 +10,7 @@
|
||||
],
|
||||
"printer_model": "Bambu Lab X1",
|
||||
"printer_variant": "0.4",
|
||||
"auxiliary_fan": "1",
|
||||
"auxiliary_fan": "0",
|
||||
"bed_exclude_area": [
|
||||
"0x0",
|
||||
"18x0",
|
||||
|
||||
@@ -4,6 +4,7 @@
|
||||
"nozzle_diameter": "0.4;0.2;0.6;0.8",
|
||||
"bed_model": "bbl-3dp-X1.stl",
|
||||
"bed_texture": "bbl-3dp-logo.svg",
|
||||
"default_bed_type": "Cool Plate",
|
||||
"family": "BBL-3DP",
|
||||
"machine_tech": "FFF",
|
||||
"model_id": "BL-P001",
|
||||
|
||||
@@ -4,6 +4,7 @@
|
||||
"nozzle_diameter": "0.4;0.2;0.6;0.8",
|
||||
"bed_model": "bbl-3dp-X1.stl",
|
||||
"bed_texture": "bbl-3dp-logo.svg",
|
||||
"default_bed_type": "Cool Plate",
|
||||
"family": "BBL-3DP",
|
||||
"machine_tech": "FFF",
|
||||
"model_id": "BL-P002",
|
||||
|
||||
@@ -4,6 +4,7 @@
|
||||
"nozzle_diameter": "0.4;0.2;0.6;0.8",
|
||||
"bed_model": "bbl-3dp-X1.stl",
|
||||
"bed_texture": "bbl-3dp-logo.svg",
|
||||
"default_bed_type": "Textured PEI Plate",
|
||||
"family": "BBL-3DP",
|
||||
"machine_tech": "FFF",
|
||||
"model_id": "C13",
|
||||
|
||||
@@ -6,6 +6,7 @@
|
||||
"setting_id": "GP084",
|
||||
"instantiation": "true",
|
||||
"default_acceleration": "6000",
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"initial_layer_infill_speed": "28",
|
||||
"initial_layer_speed": "16",
|
||||
"travel_speed": "700",
|
||||
|
||||
@@ -6,6 +6,7 @@
|
||||
"setting_id": "GP063",
|
||||
"instantiation": "true",
|
||||
"default_acceleration": "5000",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"outer_wall_acceleration": "2500",
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P1P 0.2 nozzle"
|
||||
|
||||
@@ -0,0 +1,19 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.06mm High Quality @BBL A1 0.2 nozzle",
|
||||
"inherits": "fdm_process_bbl_0.06_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP118",
|
||||
"instantiation": "true",
|
||||
"default_acceleration": "4000",
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"initial_layer_infill_speed": "28",
|
||||
"initial_layer_speed": "16",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"travel_speed": "700",
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,18 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.06mm High Quality @BBL A1M 0.2 nozzle",
|
||||
"inherits": "fdm_process_bbl_0.06_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP117",
|
||||
"instantiation": "true",
|
||||
"default_acceleration": "3000",
|
||||
"initial_layer_infill_speed": "28",
|
||||
"initial_layer_speed": "16",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"travel_speed": "700",
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,16 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.06mm High Quality @BBL P1P 0.2 nozzle",
|
||||
"inherits": "fdm_process_bbl_0.06_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP116",
|
||||
"instantiation": "true",
|
||||
"default_acceleration": "4000",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P1P 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,19 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.06mm High Quality @BBL X1C 0.2 nozzle",
|
||||
"inherits": "fdm_process_bbl_0.06_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP115",
|
||||
"instantiation": "true",
|
||||
"default_acceleration": "4000",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.2 nozzle",
|
||||
"Bambu Lab X1 0.2 nozzle",
|
||||
"Bambu Lab P1S 0.2 nozzle",
|
||||
"Bambu Lab X1E 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -5,6 +5,7 @@
|
||||
"from": "system",
|
||||
"setting_id": "GP024",
|
||||
"instantiation": "true",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.2 nozzle",
|
||||
"Bambu Lab X1 0.2 nozzle",
|
||||
|
||||
@@ -6,6 +6,7 @@
|
||||
"setting_id": "GP076",
|
||||
"instantiation": "true",
|
||||
"default_acceleration": "6000",
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"travel_speed": "700",
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.4 nozzle"
|
||||
|
||||
@@ -0,0 +1,19 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.08mm High Quality @BBL A1 0.2 nozzle",
|
||||
"inherits": "fdm_process_bbl_0.08_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP119",
|
||||
"instantiation": "true",
|
||||
"default_acceleration": "4000",
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"initial_layer_infill_speed": "28",
|
||||
"initial_layer_speed": "16",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"travel_speed": "700",
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,22 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.08mm High Quality @BBL A1",
|
||||
"inherits": "fdm_process_bbl_0.08",
|
||||
"from": "system",
|
||||
"setting_id": "GP102",
|
||||
"instantiation": "true",
|
||||
"default_acceleration": "4000",
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"gap_infill_speed": "210",
|
||||
"inner_wall_speed": "120",
|
||||
"internal_solid_infill_speed": "150",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": "150",
|
||||
"top_surface_speed": "150",
|
||||
"travel_speed": "700",
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,18 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.08mm High Quality @BBL A1M 0.2 nozzle",
|
||||
"inherits": "fdm_process_bbl_0.08_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP120",
|
||||
"instantiation": "true",
|
||||
"default_acceleration": "3000",
|
||||
"initial_layer_infill_speed": "28",
|
||||
"initial_layer_speed": "16",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"travel_speed": "700",
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,22 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.08mm High Quality @BBL A1M",
|
||||
"inherits": "fdm_process_bbl_0.08",
|
||||
"from": "system",
|
||||
"setting_id": "GP101",
|
||||
"instantiation": "true",
|
||||
"default_acceleration": "3000",
|
||||
"elefant_foot_compensation": "0",
|
||||
"gap_infill_speed": "210",
|
||||
"inner_wall_speed": "120",
|
||||
"internal_solid_infill_speed": "150",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": "150",
|
||||
"top_surface_speed": "150",
|
||||
"travel_speed": "700",
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,16 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.08mm High Quality @BBL P1P 0.2 nozzle",
|
||||
"inherits": "fdm_process_bbl_0.08_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP121",
|
||||
"instantiation": "true",
|
||||
"default_acceleration": "4000",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P1P 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,21 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.08mm High Quality @BBL P1P",
|
||||
"inherits": "fdm_process_bbl_0.08",
|
||||
"from": "system",
|
||||
"setting_id": "GP100",
|
||||
"instantiation": "true",
|
||||
"default_acceleration": "4000",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"gap_infill_speed": "210",
|
||||
"inner_wall_speed": "120",
|
||||
"internal_solid_infill_speed": "150",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": "150",
|
||||
"top_surface_speed": "150",
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P1P 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,19 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.08mm High Quality @BBL X1C 0.2 nozzle",
|
||||
"inherits": "fdm_process_bbl_0.08_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP122",
|
||||
"instantiation": "true",
|
||||
"default_acceleration": "4000",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.2 nozzle",
|
||||
"Bambu Lab X1 0.2 nozzle",
|
||||
"Bambu Lab P1S 0.2 nozzle",
|
||||
"Bambu Lab X1E 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,23 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.08mm High Quality @BBL X1C",
|
||||
"inherits": "fdm_process_bbl_0.08",
|
||||
"from": "system",
|
||||
"setting_id": "GP099",
|
||||
"instantiation": "true",
|
||||
"default_acceleration": "4000",
|
||||
"gap_infill_speed": "210",
|
||||
"inner_wall_speed": "120",
|
||||
"internal_solid_infill_speed": "150",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": "150",
|
||||
"top_surface_speed": "150",
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"Bambu Lab X1 0.4 nozzle",
|
||||
"Bambu Lab P1S 0.4 nozzle",
|
||||
"Bambu Lab X1E 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -6,6 +6,7 @@
|
||||
"setting_id": "GP085",
|
||||
"instantiation": "true",
|
||||
"default_acceleration": "6000",
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"initial_layer_infill_speed": "28",
|
||||
"initial_layer_speed": "16",
|
||||
"travel_speed": "700",
|
||||
|
||||
@@ -6,6 +6,7 @@
|
||||
"setting_id": "GP064",
|
||||
"instantiation": "true",
|
||||
"default_acceleration": "5000",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"outer_wall_acceleration": "2500",
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P1P 0.2 nozzle"
|
||||
|
||||
@@ -5,6 +5,7 @@
|
||||
"from": "system",
|
||||
"setting_id": "GP025",
|
||||
"instantiation": "true",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.2 nozzle",
|
||||
"Bambu Lab X1 0.2 nozzle",
|
||||
|
||||
@@ -0,0 +1,19 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.10mm High Quality @BBL A1 0.2 nozzle",
|
||||
"inherits": "fdm_process_bbl_0.10_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP114",
|
||||
"instantiation": "true",
|
||||
"default_acceleration": "4000",
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"initial_layer_infill_speed": "28",
|
||||
"initial_layer_speed": "16",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"travel_speed": "700",
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,19 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.10mm High Quality @BBL A1M 0.2 nozzle",
|
||||
"inherits": "fdm_process_bbl_0.10_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP113",
|
||||
"instantiation": "true",
|
||||
"default_acceleration": "3000",
|
||||
"elefant_foot_compensation": "0",
|
||||
"initial_layer_infill_speed": "28",
|
||||
"initial_layer_speed": "16",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"travel_speed": "700",
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,16 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.10mm High Quality @BBL P1P 0.2 nozzle",
|
||||
"inherits": "fdm_process_bbl_0.10_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP112",
|
||||
"instantiation": "true",
|
||||
"default_acceleration": "4000",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P1P 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,19 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.10mm High Quality @BBL X1C 0.2 nozzle",
|
||||
"inherits": "fdm_process_bbl_0.10_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP111",
|
||||
"instantiation": "true",
|
||||
"default_acceleration": "4000",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.2 nozzle",
|
||||
"Bambu Lab X1 0.2 nozzle",
|
||||
"Bambu Lab P1S 0.2 nozzle",
|
||||
"Bambu Lab X1E 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -6,6 +6,7 @@
|
||||
"setting_id": "GP083",
|
||||
"instantiation": "true",
|
||||
"default_acceleration": "6000",
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"initial_layer_infill_speed": "28",
|
||||
"initial_layer_speed": "16",
|
||||
"travel_speed": "700",
|
||||
|
||||
@@ -6,6 +6,7 @@
|
||||
"setting_id": "GP039",
|
||||
"instantiation": "true",
|
||||
"default_acceleration": "6000",
|
||||
"elefant_foot_compensation": "0",
|
||||
"initial_layer_infill_speed": "28",
|
||||
"initial_layer_speed": "16",
|
||||
"travel_speed": "700",
|
||||
|
||||
@@ -5,6 +5,7 @@
|
||||
"from": "system",
|
||||
"setting_id": "GP007",
|
||||
"instantiation": "true",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.2 nozzle",
|
||||
"Bambu Lab X1 0.2 nozzle",
|
||||
|
||||
@@ -6,6 +6,7 @@
|
||||
"setting_id": "GP086",
|
||||
"instantiation": "true",
|
||||
"default_acceleration": "6000",
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"initial_layer_infill_speed": "28",
|
||||
"initial_layer_speed": "16",
|
||||
"travel_speed": "700",
|
||||
|
||||
@@ -6,6 +6,7 @@
|
||||
"setting_id": "GP065",
|
||||
"instantiation": "true",
|
||||
"default_acceleration": "5000",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"outer_wall_acceleration": "2500",
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P1P 0.2 nozzle"
|
||||
|
||||
@@ -6,6 +6,7 @@
|
||||
"setting_id": "GP077",
|
||||
"instantiation": "true",
|
||||
"default_acceleration": "6000",
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"travel_speed": "700",
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.4 nozzle"
|
||||
|
||||
@@ -0,0 +1,22 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm High Quality @BBL A1",
|
||||
"inherits": "fdm_process_bbl_0.12",
|
||||
"from": "system",
|
||||
"setting_id": "GP106",
|
||||
"instantiation": "true",
|
||||
"default_acceleration": "4000",
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"gap_infill_speed": "230",
|
||||
"inner_wall_speed": "150",
|
||||
"internal_solid_infill_speed": "180",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": "180",
|
||||
"top_surface_speed": "150",
|
||||
"travel_speed": "700",
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,22 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm High Quality @BBL A1M",
|
||||
"inherits": "fdm_process_bbl_0.12",
|
||||
"from": "system",
|
||||
"setting_id": "GP105",
|
||||
"instantiation": "true",
|
||||
"default_acceleration": "3000",
|
||||
"elefant_foot_compensation": "0",
|
||||
"gap_infill_speed": "230",
|
||||
"inner_wall_speed": "150",
|
||||
"internal_solid_infill_speed": "180",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": "180",
|
||||
"top_surface_speed": "150",
|
||||
"travel_speed": "700",
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,20 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm High Quality @BBL P1P",
|
||||
"inherits": "fdm_process_bbl_0.12",
|
||||
"from": "system",
|
||||
"setting_id": "GP104",
|
||||
"instantiation": "true",
|
||||
"default_acceleration": "4000",
|
||||
"gap_infill_speed": "230",
|
||||
"inner_wall_speed": "150",
|
||||
"internal_solid_infill_speed": "180",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": "180",
|
||||
"top_surface_speed": "150",
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P1P 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,23 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm High Quality @BBL X1C",
|
||||
"inherits": "fdm_process_bbl_0.12",
|
||||
"from": "system",
|
||||
"setting_id": "GP103",
|
||||
"instantiation": "true",
|
||||
"default_acceleration": "4000",
|
||||
"gap_infill_speed": "230",
|
||||
"inner_wall_speed": "150",
|
||||
"internal_solid_infill_speed": "180",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": "180",
|
||||
"top_surface_speed": "150",
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"Bambu Lab X1 0.4 nozzle",
|
||||
"Bambu Lab P1S 0.4 nozzle",
|
||||
"Bambu Lab X1E 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -5,6 +5,7 @@
|
||||
"from": "system",
|
||||
"setting_id": "GP026",
|
||||
"instantiation": "true",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.2 nozzle",
|
||||
"Bambu Lab X1 0.2 nozzle",
|
||||
|
||||
@@ -6,6 +6,7 @@
|
||||
"setting_id": "GP087",
|
||||
"instantiation": "true",
|
||||
"default_acceleration": "6000",
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"initial_layer_infill_speed": "28",
|
||||
"initial_layer_speed": "16",
|
||||
"travel_speed": "700",
|
||||
|
||||
@@ -6,6 +6,7 @@
|
||||
"setting_id": "GP066",
|
||||
"instantiation": "true",
|
||||
"default_acceleration": "5000",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"outer_wall_acceleration": "2500",
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P1P 0.2 nozzle"
|
||||
|
||||
@@ -5,6 +5,7 @@
|
||||
"from": "system",
|
||||
"setting_id": "GP027",
|
||||
"instantiation": "true",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.2 nozzle",
|
||||
"Bambu Lab X1 0.2 nozzle",
|
||||
|
||||
@@ -0,0 +1,22 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.16mm High Quality @BBL A1",
|
||||
"inherits": "fdm_process_bbl_0.16",
|
||||
"from": "system",
|
||||
"setting_id": "GP110",
|
||||
"instantiation": "true",
|
||||
"default_acceleration": "4000",
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"gap_infill_speed": "250",
|
||||
"inner_wall_speed": "150",
|
||||
"internal_solid_infill_speed": "200",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": "200",
|
||||
"top_surface_speed": "150",
|
||||
"travel_speed": "700",
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,22 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.16mm High Quality @BBL A1M",
|
||||
"inherits": "fdm_process_bbl_0.16",
|
||||
"from": "system",
|
||||
"setting_id": "GP109",
|
||||
"instantiation": "true",
|
||||
"default_acceleration": "3000",
|
||||
"elefant_foot_compensation": "0",
|
||||
"gap_infill_speed": "250",
|
||||
"inner_wall_speed": "150",
|
||||
"internal_solid_infill_speed": "200",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": "200",
|
||||
"top_surface_speed": "150",
|
||||
"travel_speed": "700",
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,20 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.16mm High Quality @BBL P1P",
|
||||
"inherits": "fdm_process_bbl_0.16",
|
||||
"from": "system",
|
||||
"setting_id": "GP108",
|
||||
"instantiation": "true",
|
||||
"default_acceleration": "4000",
|
||||
"gap_infill_speed": "250",
|
||||
"inner_wall_speed": "150",
|
||||
"internal_solid_infill_speed": "200",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": "200",
|
||||
"top_surface_speed": "150",
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P1P 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,23 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.16mm High Quality @BBL X1C",
|
||||
"inherits": "fdm_process_bbl_0.16",
|
||||
"from": "system",
|
||||
"setting_id": "GP107",
|
||||
"instantiation": "true",
|
||||
"default_acceleration": "4000",
|
||||
"gap_infill_speed": "250",
|
||||
"inner_wall_speed": "150",
|
||||
"internal_solid_infill_speed": "200",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": "200",
|
||||
"top_surface_speed": "150",
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"Bambu Lab X1 0.4 nozzle",
|
||||
"Bambu Lab P1S 0.4 nozzle",
|
||||
"Bambu Lab X1E 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -6,6 +6,7 @@
|
||||
"setting_id": "GP078",
|
||||
"instantiation": "true",
|
||||
"default_acceleration": "6000",
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"travel_speed": "700",
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.4 nozzle"
|
||||
|
||||
@@ -6,6 +6,7 @@
|
||||
"setting_id": "GP088",
|
||||
"instantiation": "true",
|
||||
"default_acceleration": "6000",
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"travel_speed": "700",
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.6 nozzle"
|
||||
|
||||
@@ -5,6 +5,7 @@
|
||||
"from": "system",
|
||||
"setting_id": "GP072",
|
||||
"instantiation": "true",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P1P 0.6 nozzle"
|
||||
]
|
||||
|
||||
@@ -5,6 +5,7 @@
|
||||
"from": "system",
|
||||
"setting_id": "GP028",
|
||||
"instantiation": "true",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.6 nozzle",
|
||||
"Bambu Lab X1 0.6 nozzle",
|
||||
|
||||
@@ -6,6 +6,7 @@
|
||||
"setting_id": "GP079",
|
||||
"instantiation": "true",
|
||||
"default_acceleration": "6000",
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"travel_speed": "700",
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.4 nozzle"
|
||||
|
||||
@@ -6,6 +6,7 @@
|
||||
"setting_id": "GP080",
|
||||
"instantiation": "true",
|
||||
"default_acceleration": "6000",
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"outer_wall_speed": "60",
|
||||
"sparse_infill_density": "25%",
|
||||
"travel_speed": "700",
|
||||
|
||||
@@ -6,6 +6,7 @@
|
||||
"setting_id": "GP081",
|
||||
"instantiation": "true",
|
||||
"default_acceleration": "6000",
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"travel_speed": "700",
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.4 nozzle"
|
||||
|
||||
Loaded 100 of 203 files, more files were not shown because too many files have changed in this diff.
Show more
Reference in new issue
Block a user