OrcaSlicer/resources/profiles/UltiMaker/machine/UltiMaker S5 0.4 nozzle.json

{
	"type": "machine",
	"name": "UltiMaker S5 0.4 nozzle",
	"inherits": "fdm_machine_common",
	"from": "system",
	"setting_id": "hmkJtw7J1KXbiYfj",
	"instantiation": "true",
	"printer_model": "UltiMaker S5",
	"default_print_profile": "0.18mm Standard @UltiMaker S5",
	"nozzle_diameter": [
		"0.4",
		"0.4"
	],
	"printable_area": [
		"0x0",
		"330x0",
		"330x240",
		"0x240"
	],
	"printable_height": "300",
	"extruder_clearance_height_to_rod": "60",
	"extruder_clearance_radius": "61",
	"nozzle_type": [
		"brass",
		"brass"
	],
	"auxiliary_fan": "0",
	"use_relative_e_distances": "0",
	"machine_max_acceleration_extruding": [
		"3500",
		"3500",
		"3500",
		"3500"
	],
	"machine_max_acceleration_retracting": [
		"3500",
		"3500",
		"3500",
		"3500"
	],
	"machine_max_acceleration_travel": [
		"3500",
		"3500",
		"3500",
		"3500"
	],
	"machine_max_acceleration_x": [
		"3500",
		"3500",
		"3500",
		"3500"
	],
	"machine_max_acceleration_y": [
		"3500",
		"3500",
		"3500",
		"3500"
	],
	"machine_max_acceleration_z": [
		"500",
		"500",
		"500",
		"500"
	],
	"machine_max_speed_e": [
		"120",
		"120",
		"120",
		"120"
	],
	"machine_max_speed_x": [
		"500",
		"500",
		"500",
		"500"
	],
	"machine_max_speed_y": [
		"500",
		"500",
		"500",
		"500"
	],
	"machine_max_speed_z": [
		"12",
		"12",
		"12",
		"12"
	],
	"machine_max_jerk_e": [
		"2.5",
		"2.5",
		"2.5",
		"2.5"
	],
	"machine_max_jerk_x": [
		"20",
		"20",
		"20",
		"20"
	],
	"machine_max_jerk_y": [
		"20",
		"20",
		"20",
		"20"
	],
	"machine_max_jerk_z": [
		"0.4",
		"0.4",
		"0.4",
		"0.4"
	],
	"max_layer_height": [
		"0.4",
		"0.4"
	],
	"min_layer_height": [
		"0.06",
		"0.06"
	],
	"printer_settings_id": "Qidi",
	"retraction_minimum_travel": [
		"5",
		"5"
	],
	"retract_before_wipe": [
		"70%",
		"70%"
	],
	"retraction_length": [
		"4.5",
		"4.5"
	],
	"retract_length_toolchange": [
		"11",
		"11"
	],
	"retraction_speed": [
		"45",
		"45"
	],
	"deretraction_speed": [
		"0",
		"0"
	],
	"wipe_distance": [
		"0.2",
		"0.2"
	],
	"single_extruder_multi_material": "0",
	"change_filament_gcode": "; Set temps to avoid oozing\nM104 T{previous_extruder} S{old_filament_temp - 5}\nM104 T{next_extruder} S{new_filament_temp}\n; Change to next extruder\nT{next_extruder}",
	"machine_pause_gcode": "M0",
	"default_filament_profile": [
		"Generic PLA @System"
	],
	"z_hop": [
		"1",
		"1"
	],
	"z_hop_types": [
		"Normal Lift",
		"Normal Lift"
	],
	"extruder_type": [
		"Direct Drive",
		"Direct Drive"
	],
	"extruder_offset": [
		"0x0",
		"0x22"
	],
	"extra_loading_move": "0",
	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\n",
	"fan_speedup_time": "0.5",
	"machine_start_gcode": "; NOTE: Do NOT remove the following header. It is necessary for the UM printer to not crash.\n;START_OF_HEADER\n;HEADER_VERSION:0.1\n;FLAVOR:Griffin\n;GENERATOR.NAME:OrcaSlicer\n;GENERATOR.VERSION:5.11.0\n;GENERATOR.BUILD_DATE:2016-06-23\n;TARGET_MACHINE.NAME:[printer_model]\n{if is_extruder_used[0]};EXTRUDER_TRAIN.0.INITIAL_TEMPERATURE:{first_layer_temperature[0]}\n;EXTRUDER_TRAIN.0.MATERIAL.VOLUME_USED:{extruded_volume[0]}\n;EXTRUDER_TRAIN.0.MATERIAL.GUID:506c9f0d-e3aa-4bd4-b2d2-23e2425b1aa9\n;EXTRUDER_TRAIN.0.NOZZLE.DIAMETER:{nozzle_diameter[0]}\n;EXTRUDER_TRAIN.0.NOZZLE.NAME:AA {nozzle_diameter[0]}{endif}\n{if is_extruder_used[1]};EXTRUDER_TRAIN.1.INITIAL_TEMPERATURE:{first_layer_temperature[1]}\n;EXTRUDER_TRAIN.1.MATERIAL.VOLUME_USED:{extruded_volume[1]}\n;EXTRUDER_TRAIN.1.MATERIAL.GUID:506c9f0d-e3aa-4bd4-b2d2-23e2425b1aa9\n;EXTRUDER_TRAIN.1.NOZZLE.DIAMETER:{nozzle_diameter[1]}\n;EXTRUDER_TRAIN.1.NOZZLE.NAME:AA {nozzle_diameter[1]}{endif}\n;BUILD_PLATE.INITIAL_TEMPERATURE:[bed_temperature_initial_layer_single]\n;BUILD_VOLUME.TEMPERATURE:28\n;PRINT.TIME:2\n;PRINT.SIZE.MIN.X:{first_layer_print_min[0]}\n;PRINT.SIZE.MIN.Y:{first_layer_print_min[1]}\n;PRINT.SIZE.MIN.Z:{first_layer_height}\n;PRINT.SIZE.MAX.X:{first_layer_print_max[0]}\n;PRINT.SIZE.MAX.Y:{first_layer_print_max[1]}\n;PRINT.SIZE.MAX.Z:{int(total_layer_count * first_layer_height)}\n;END_OF_HEADER\nT[initial_extruder]\n\nM82 ;absolute extrusion mode\nG92 E0\nM190 S[bed_temperature_initial_layer_single] ; Wait for bed temp\nM104 T[initial_extruder] S[first_layer_temperature[initial_extruder]] ; Heat extruder\nM109 T[initial_extruder] S[first_layer_temperature[initial_extruder]] ; Wait for extruder temp\n\n\n; Set the settings we removed in the post-processing (orcaslicer generated header).\nM73 P0 R0 ;TODO change the R value into the total minutes of print\nM201 X[machine_max_acceleration_x] Y[machine_max_acceleration_y] Z[machine_max_acceleration_z] E[machine_max_acceleration_e] ; accel\nM203 X[machine_max_speed_x] Y[machine_max_speed_y] Z[machine_max_speed_z] E[machine_max_speed_e] ; max speed\nM204 S[machine_max_acceleration_extruding] ; starting accel\nM204 P[machine_max_acceleration_extruding] R[machine_max_acceleration_retracting] T[machine_max_acceleration_travel]\nM205 X[machine_max_jerk_x] Y[machine_max_jerk_y] Z[machine_max_jerk_z] E[machine_max_jerk_e] ; jerk limits\n\nM107; start with the fan off\n\n{if is_extruder_used[0]}T0\n; Prime blob for left extruder\nG0 F9000 X4 Y6 Z2\nG280 ; g280 is UM-specific\nG1 F2700 E-6.5 ;retract{endif}\n\n{if is_extruder_used[1]}T1\n; Prime blob for right extruder\nG0 F9000 X-4 Y6 Z2\nG280 ; g280 is UM-specific\nG1 F2700 E-6.5 ;retract\n{if initial_extruder == 0}T0{endif}{endif}\n\n\n\nM82; set extruder to absolute mode\n\n; End of the start gcode sequence.\n;LAYER_COUNT:[total_layer_count]",
	"machine_end_gcode": "; Move toolhead out of the way\nG28 X Y\n\nM204 S3000; reset accel\nM107; fan off\n\n; heaters off\nM104 S0\nM104 T0 S0\nM104 T1 S0\nM140 S0\n\n; disable motors\nM84\n\n\nM82 ;absolute extrusion mode\n\n;End of Gcode\n",
	"machine_tool_change_time": "1.5",
	"scan_first_layer": "0"
}