{ "type": "machine", "name": "UltiMaker S5 0.4 nozzle", "inherits": "fdm_machine_common", "from": "system", "setting_id": "hmkJtw7J1KXbiYfj", "instantiation": "true", "printer_model": "UltiMaker S5", "default_print_profile": "0.18mm Standard @UltiMaker S5", "nozzle_diameter": [ "0.4", "0.4" ], "printable_area": [ "0x0", "330x0", "330x240", "0x240" ], "printable_height": "300", "extruder_clearance_height_to_rod": "60", "extruder_clearance_radius": "61", "nozzle_type": [ "brass", "brass" ], "auxiliary_fan": "0", "use_relative_e_distances": "0", "machine_max_acceleration_extruding": [ "3500", "3500", "3500", "3500" ], "machine_max_acceleration_retracting": [ "3500", "3500", "3500", "3500" ], "machine_max_acceleration_travel": [ "3500", "3500", "3500", "3500" ], "machine_max_acceleration_x": [ "3500", "3500", "3500", "3500" ], "machine_max_acceleration_y": [ "3500", "3500", "3500", "3500" ], "machine_max_acceleration_z": [ "500", "500", "500", "500" ], "machine_max_speed_e": [ "120", "120", "120", "120" ], "machine_max_speed_x": [ "500", "500", "500", "500" ], "machine_max_speed_y": [ "500", "500", "500", "500" ], "machine_max_speed_z": [ "12", "12", "12", "12" ], "machine_max_jerk_e": [ "2.5", "2.5", "2.5", "2.5" ], "machine_max_jerk_x": [ "20", "20", "20", "20" ], "machine_max_jerk_y": [ "20", "20", "20", "20" ], "machine_max_jerk_z": [ "0.4", "0.4", "0.4", "0.4" ], "max_layer_height": [ "0.4", "0.4" ], "min_layer_height": [ "0.06", "0.06" ], "printer_settings_id": "Qidi", "retraction_minimum_travel": [ "5", "5" ], "retract_before_wipe": [ "70%", "70%" ], "retraction_length": [ "4.5", "4.5" ], "retract_length_toolchange": [ "11", "11" ], "retraction_speed": [ "45", "45" ], "deretraction_speed": [ "0", "0" ], "wipe_distance": [ "0.2", "0.2" ], "single_extruder_multi_material": "0", "change_filament_gcode": "; Set temps to avoid oozing\nM104 T{previous_extruder} S{old_filament_temp - 5}\nM104 T{next_extruder} S{new_filament_temp}\n; Change to next extruder\nT{next_extruder}", "machine_pause_gcode": "M0", "default_filament_profile": [ "Generic PLA @System" ], "z_hop": [ "1", "1" ], "z_hop_types": [ "Normal Lift", "Normal Lift" ], "extruder_type": [ "Direct Drive", "Direct Drive" ], "extruder_offset": [ "0x0", "0x22" ], "extra_loading_move": "0", "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\n", "fan_speedup_time": "0.5", "machine_start_gcode": "; NOTE: Do NOT remove the following header. It is necessary for the UM printer to not crash.\n;START_OF_HEADER\n;HEADER_VERSION:0.1\n;FLAVOR:Griffin\n;GENERATOR.NAME:OrcaSlicer\n;GENERATOR.VERSION:5.11.0\n;GENERATOR.BUILD_DATE:2016-06-23\n;TARGET_MACHINE.NAME:[printer_model]\n{if is_extruder_used[0]};EXTRUDER_TRAIN.0.INITIAL_TEMPERATURE:{first_layer_temperature[0]}\n;EXTRUDER_TRAIN.0.MATERIAL.VOLUME_USED:{extruded_volume[0]}\n;EXTRUDER_TRAIN.0.MATERIAL.GUID:506c9f0d-e3aa-4bd4-b2d2-23e2425b1aa9\n;EXTRUDER_TRAIN.0.NOZZLE.DIAMETER:{nozzle_diameter[0]}\n;EXTRUDER_TRAIN.0.NOZZLE.NAME:AA {nozzle_diameter[0]}{endif}\n{if is_extruder_used[1]};EXTRUDER_TRAIN.1.INITIAL_TEMPERATURE:{first_layer_temperature[1]}\n;EXTRUDER_TRAIN.1.MATERIAL.VOLUME_USED:{extruded_volume[1]}\n;EXTRUDER_TRAIN.1.MATERIAL.GUID:506c9f0d-e3aa-4bd4-b2d2-23e2425b1aa9\n;EXTRUDER_TRAIN.1.NOZZLE.DIAMETER:{nozzle_diameter[1]}\n;EXTRUDER_TRAIN.1.NOZZLE.NAME:AA {nozzle_diameter[1]}{endif}\n;BUILD_PLATE.INITIAL_TEMPERATURE:[bed_temperature_initial_layer_single]\n;BUILD_VOLUME.TEMPERATURE:28\n;PRINT.TIME:2\n;PRINT.SIZE.MIN.X:{first_layer_print_min[0]}\n;PRINT.SIZE.MIN.Y:{first_layer_print_min[1]}\n;PRINT.SIZE.MIN.Z:{first_layer_height}\n;PRINT.SIZE.MAX.X:{first_layer_print_max[0]}\n;PRINT.SIZE.MAX.Y:{first_layer_print_max[1]}\n;PRINT.SIZE.MAX.Z:{int(total_layer_count * first_layer_height)}\n;END_OF_HEADER\nT[initial_extruder]\n\nM82 ;absolute extrusion mode\nG92 E0\nM190 S[bed_temperature_initial_layer_single] ; Wait for bed temp\nM104 T[initial_extruder] S[first_layer_temperature[initial_extruder]] ; Heat extruder\nM109 T[initial_extruder] S[first_layer_temperature[initial_extruder]] ; Wait for extruder temp\n\n\n; Set the settings we removed in the post-processing (orcaslicer generated header).\nM73 P0 R0 ;TODO change the R value into the total minutes of print\nM201 X[machine_max_acceleration_x] Y[machine_max_acceleration_y] Z[machine_max_acceleration_z] E[machine_max_acceleration_e] ; accel\nM203 X[machine_max_speed_x] Y[machine_max_speed_y] Z[machine_max_speed_z] E[machine_max_speed_e] ; max speed\nM204 S[machine_max_acceleration_extruding] ; starting accel\nM204 P[machine_max_acceleration_extruding] R[machine_max_acceleration_retracting] T[machine_max_acceleration_travel]\nM205 X[machine_max_jerk_x] Y[machine_max_jerk_y] Z[machine_max_jerk_z] E[machine_max_jerk_e] ; jerk limits\n\nM107; start with the fan off\n\n{if is_extruder_used[0]}T0\n; Prime blob for left extruder\nG0 F9000 X4 Y6 Z2\nG280 ; g280 is UM-specific\nG1 F2700 E-6.5 ;retract{endif}\n\n{if is_extruder_used[1]}T1\n; Prime blob for right extruder\nG0 F9000 X-4 Y6 Z2\nG280 ; g280 is UM-specific\nG1 F2700 E-6.5 ;retract\n{if initial_extruder == 0}T0{endif}{endif}\n\n\n\nM82; set extruder to absolute mode\n\n; End of the start gcode sequence.\n;LAYER_COUNT:[total_layer_count]", "machine_end_gcode": "; Move toolhead out of the way\nG28 X Y\n\nM204 S3000; reset accel\nM107; fan off\n\n; heaters off\nM104 S0\nM104 T0 S0\nM104 T1 S0\nM140 S0\n\n; disable motors\nM84\n\n\nM82 ;absolute extrusion mode\n\n;End of Gcode\n", "machine_tool_change_time": "1.5", "scan_first_layer": "0" }