fix: sync per-filament arrays so MM segmentation can't read out of bounds

Free G-code result and preview memory on reset (#16065 )
GCodeProcessorResult declares a copy assignment, which suppresses the implicit move assignment, so `*result = std::move(processor.extract_result())` binds to the copy and duplicates the whole moves array: 96 bytes per move, measured at 147.7 MiB in one allocation for a 597k facet model at 0.08 mm, with the source staying alive until the export returns. Add the move assignment. It assigns exactly the same 39 members in the same order as the copy, including the ones the copy deliberately leaves alone, so a target that carries its own filament maps and nozzle type keeps them. A move constructor is intentionally not added: the type holds a std::mutex, so it is neither copy nor move constructible today and a partial one would leave ten members uninitialised. reset() now releases the two print sized vectors rather than clearing them. Its callers are the paths that discard a result, so the memory went back only at the next slice. ViewerImpl::reset() does the same for the two vectors sized by the print, which is what keeps a discarded preview resident, and counts m_vertices_colors in the reported CPU memory, where it was missing.
2026-10-13 19:01:21 +00:00 · 2026-10-13 20:38:43 +08:00 · 2026-10-13 18:06:46 +08:00 · 2026-10-13 18:05:51 +08:00 · 2026-10-13 16:49:06 +08:00 · 2026-10-13 16:37:00 +08:00
342 changed files with 16998 additions and 4703 deletions
@@ -341,12 +341,12 @@ jobs:
          
          # Notarize main DMG
          xcrun notarytool submit "OrcaSlicer_Mac_universal_${{ env.ver }}.dmg" --apple-id "${{ secrets.APPLE_DEV_ACCOUNT }}" --team-id "${{ secrets.TEAM_ID }}" --password "${{ secrets.APP_PWD }}" --wait
-          xcrun stapler staple OrcaSlicer_Mac_universal_${{ env.ver }}.dmg
+          retry xcrun stapler staple OrcaSlicer_Mac_universal_${{ env.ver }}.dmg

          # Notarize profile validator DMG if it exists
          if [ -f "OrcaSlicer_profile_validator_Mac_universal_${{ env.ver }}.dmg" ]; then
            xcrun notarytool submit "OrcaSlicer_profile_validator_Mac_universal_${{ env.ver }}.dmg" --apple-id "${{ secrets.APPLE_DEV_ACCOUNT }}" --team-id "${{ secrets.TEAM_ID }}" --password "${{ secrets.APP_PWD }}" --wait
-            xcrun stapler staple OrcaSlicer_profile_validator_Mac_universal_${{ env.ver }}.dmg
+            retry xcrun stapler staple OrcaSlicer_profile_validator_Mac_universal_${{ env.ver }}.dmg
          fi

      - name: Create DMG without notary
@@ -460,10 +460,6 @@ jobs:
      - name: Build slicer Win
        if: runner.os == 'Windows'
        working-directory: ${{ github.workspace }}
-        # Orca: Removed Netfabb STL fixing service support in favor of CGAL.
-        # env:
-        #   WindowsSdkDir: 'C:\Program Files (x86)\Windows Kits\10\'
-        #   WindowsSDKVersion: '10.0.26100.0\'
        # --tests builds the unit tests too; the unit_tests_windows_* jobs run them.
        run: |
          # cache-path is the install directory inside the deps build directory.
@@ -16,6 +16,15 @@ on:

 permissions:
  contents: read
+  # Listing caches and builds while waiting for a deps cache.
+  actions: read
+
+# Read by scripts/ci_deps_cache.sh.
+env:
+  REPO: ${{ github.repository }}
+  WORKFLOW: build_all.yml
+  BASE_REF: ${{ github.base_ref }}
+  JOB: build_linux (${{ vars.SELF_HOSTED && 'orca-lnx-server' || 'ubuntu-24.04' }})

 concurrency:
  group: ${{ github.workflow }}-${{ github.event.pull_request.number }}
@@ -35,7 +44,7 @@ jobs:
          # The PR merge commit plus its first parent, the base it is diffed against.
          fetch-depth: 2

-      - name: Look for changed C++ files
+      - name: Look for changed files
        id: changes
        run: |
          if git -c core.quotePath=false diff --name-only HEAD^1 -- src tests | grep -qE '\.(cpp|cc|cxx|hpp|h|hxx)$'; then
@@ -43,18 +52,75 @@ jobs:
          else
            echo "No C++ changes under src/ or tests/."
          fi
+          if ! git diff --quiet HEAD^1 -- deps; then
+            echo "deps=true" >> "$GITHUB_OUTPUT"
+          fi
+          echo "deps-key=linux-clang-cache-orcaslicer_deps-build-${{ hashFiles('deps/**') }}" >> "$GITHUB_OUTPUT"

-      # Parsing needs the dependency headers, not a build of this PR's deps/, so
-      # a PR that changes deps/ falls back to the newest cache main has.
+      # Parsing needs the dependency headers, not a build of this PR's deps/.
+      # Without an exact match the job waits for the build that saves it: this
+      # PR's own when it changes deps/, otherwise a running push build of the
+      # base branch with the same deps. With neither, a PR that keeps deps/
+      # falls back to the newest cache.
      - name: Restore cached deps
+        id: deps_cache
        if: steps.changes.outputs.cpp == 'true'
        uses: actions/cache/restore@v6
        with:
          path: ${{ github.workspace }}/deps/build/OrcaSlicer_dep
-          key: linux-clang-cache-orcaslicer_deps-build-${{ hashFiles('deps/**') }}
+          key: ${{ steps.changes.outputs.deps-key }}
+
+      - name: Look for a build to wait for
+        id: wait_check
+        if: steps.changes.outputs.cpp == 'true' && steps.deps_cache.outputs.cache-hit != 'true'
+        env:
+          GH_TOKEN: ${{ github.token }}
+          HEAD_SHA: ${{ github.event.pull_request.head.sha }}
+        run: bash scripts/ci_deps_cache.sh ${{ steps.changes.outputs.deps == 'true' && 'own' || 'check' }}
+
+      # Linux Build Deps takes about 35 minutes on GitHub-hosted runners. The
+      # wait ends early when the deps job fails.
+      - name: Wait for the deps cache
+        if: steps.wait_check.outputs.wait-for != ''
+        timeout-minutes: 100
+        env:
+          GH_TOKEN: ${{ github.token }}
+          KEY: ${{ steps.changes.outputs.deps-key }}
+          CACHE_REF: ${{ steps.changes.outputs.deps == 'true' && github.ref || format('refs/heads/{0}', github.base_ref) }}
+          KEY_INPUTS: ${{ steps.wait_check.outputs.key-inputs }}
+          WAIT_FOR: ${{ steps.wait_check.outputs.wait-for }}
+          WAIT_SINCE: ${{ steps.wait_check.outputs.wait-since }}
+          WAIT_MINUTES: 90
+        run: bash scripts/ci_deps_cache.sh wait
+
+      - name: Restore the deps cache after waiting
+        id: waited_cache
+        if: steps.wait_check.outputs.wait-for != ''
+        uses: actions/cache/restore@v6
+        with:
+          path: ${{ github.workspace }}/deps/build/OrcaSlicer_dep
+          key: ${{ steps.changes.outputs.deps-key }}
+
+      - name: Fail without this PR's deps cache
+        if: steps.changes.outputs.deps == 'true' && steps.wait_check.outcome == 'success' && steps.waited_cache.outputs.cache-hit != 'true'
+        run: |
+          echo "::error::No deps cache ${{ steps.changes.outputs.deps-key }}. Check this PR's Linux Build Deps job, then rerun clang-tidy."
+          exit 1
+
+      - name: Restore the newest cached deps
+        id: newest_cache
+        if: steps.changes.outputs.deps != 'true' && steps.wait_check.outcome == 'success' && steps.waited_cache.outputs.cache-hit != 'true'
+        uses: actions/cache/restore@v6
+        with:
+          path: ${{ github.workspace }}/deps/build/OrcaSlicer_dep
+          key: ${{ steps.changes.outputs.deps-key }}
          restore-keys: linux-clang-cache-orcaslicer_deps-build-
          fail-on-cache-miss: true

+      - name: Warn about older deps
+        if: steps.newest_cache.outcome == 'success' && steps.newest_cache.outputs.cache-hit != 'true'
+        run: echo "::warning title=Older deps::No cache matches this PR's deps/, so clang-tidy parsed against ${{ steps.newest_cache.outputs.cache-matched-key }}. If it reports errors in code that uses a dependency, rerun clang-tidy once the base branch's Build all has saved the new deps."
+
      - name: Apt-Install Dependencies
        if: steps.changes.outputs.cpp == 'true' && !vars.SELF_HOSTED
        uses: ./.github/actions/apt-install-deps
@@ -497,47 +497,6 @@ endif()
 # Once we get rid of Perl and libslic3r is linked statically, we can get rid of -fPIC
 set(CMAKE_POSITION_INDEPENDENT_CODE ON)

-# WIN10SDK_PATH is used to point CMake to the WIN10 SDK installation directory.
-# We pick it from environment if it is not defined in another way
-# ORCA: Removed Netfabb STL fixing service support in favor of CGAL.
-# if(WIN32)
-#     if(NOT DEFINED WIN10SDK_PATH)
-#         if(DEFINED ENV{WIN10SDK_PATH})
-#                 set(WIN10SDK_PATH "$ENV{WIN10SDK_PATH}")
-#         endif()
-#     endif()
-#     if(DEFINED WIN10SDK_PATH)
-#         #BBS: modify win10sdk_path
-#         if (EXISTS "${WIN10SDK_PATH}/winrt/windows.graphics.printing3d.h")
-#             set(WIN10SDK_INCLUDE_PATH "${WIN10SDK_PATH}")
-#         else()
-#             message("WIN10SDK_PATH is invalid: ${WIN10SDK_PATH}")
-#             message("${WIN10SDK_PATH}/winrt/windows.graphics.printing3d.h was not found")
-#             message("STL fixing by the Netfabb service will not be compiled")
-#             unset(WIN10SDK_PATH)
-#         endif()
-#     else()
-#         # Try to use the default Windows 10 SDK path.
-#         if (DEFINED ENV{WindowsSdkDir} AND DEFINED ENV{WindowsSDKVersion})
-#             set(WIN10SDK_INCLUDE_PATH "$ENV{WindowsSdkDir}/Include/$ENV{WindowsSDKVersion}")
-#         else ()
-#             set(WIN10SDK_INCLUDE_PATH "C:/Program Files (x86)/Windows Kits/10/Include/10.0.26100.0")
-#         endif ()
-#         if (NOT EXISTS "${WIN10SDK_INCLUDE_PATH}/winrt/windows.graphics.printing3d.h")
-#             message("${WIN10SDK_INCLUDE_PATH}/winrt/windows.graphics.printing3d.h was not found")
-#             message("STL fixing by the Netfabb service will not be compiled")
-#             unset(WIN10SDK_INCLUDE_PATH)
-#         endif()
-#     endif()
-#     if(WIN10SDK_INCLUDE_PATH)
-#         message("Building with Win10 Netfabb STL fixing service support")
-#         add_definitions(-DHAS_WIN10SDK)
-#         include_directories(SYSTEM "${WIN10SDK_INCLUDE_PATH}")
-#     else()
-#         message("Building without Win10 Netfabb STL fixing service support")
-#     endif()
-# endif()
-
 if (APPLE)
    message("OS X SDK Path: ${CMAKE_OSX_SYSROOT}")
    if (CMAKE_OSX_DEPLOYMENT_TARGET)
@@ -1,10 +1,18 @@
 # ccache does not parse the -clang: arguments CMake uses for clang-cl's gcc-style
 # depfile, so a cache hit writes the object and no depfile, and Ninja then records
 # no headers for that object. ccache reproduces /showIncludes output on a hit.
+#
+# Clang also records the modification time of every input in a precompiled header
+# and rejects the header once one differs. ccache caches the compile that creates
+# the header, so a tree that regenerates cmake_pch.cxx gets back a header stamped
+# with the old file's time, and every compile that uses it fails. The build system
+# already rebuilds the header when an input changes. This covers the dependencies,
+# such as wxWidgets; PrecompiledHeader.cmake does the same for OrcaSlicer's targets.
 foreach (_lang C CXX)
    if (CMAKE_${_lang}_COMPILER_ID STREQUAL "Clang" AND
        CMAKE_${_lang}_COMPILER_FRONTEND_VARIANT STREQUAL "MSVC")
        set(CMAKE_DEPFILE_FLAGS_${_lang} "/showIncludes")
        set(CMAKE_${_lang}_DEPFILE_FORMAT msvc)
+        list(APPEND CMAKE_${_lang}_COMPILE_OPTIONS_CREATE_PCH -Xclang -fno-pch-timestamp)
    endif ()
 endforeach ()
@@ -0,0 +1,135 @@
+# Mesh repair — High Level Design
+
+## Purpose and scope
+
+Mesh repair turns a broken triangle mesh into closed, outward oriented shells that bound a solid, so that the
+mesh slices predictably and the other mesh tools (booleans, cut, painting) get valid input. It runs on demand:
+the *Fix Model* command of the context menu of an object or part and of the warning icon in the object list, *Fix
+All* and *Fix All Plates* in the context menu of a plate, the prompt the Cut tool shows when a cut leaves open edges,
+the *Repair and import* choice of texture import, and the `--repair` option of the command line. It is built on CGAL
+and is the only repair the application has, on every platform.
+
+`repair_mesh()` in `src/libslic3r/MeshRepair.cpp` does the work on one `TriangleMesh`, and `ModelVolume::repair()`
+applies it to a part: it replaces the mesh only when the repair changed it, and remaps or drops the painting of a
+replaced mesh. The GUI side, `fix_model_with_cgal_gui()` in `src/slic3r/Utils/FixModelByCgal.cpp`, runs it on a
+worker thread for each volume of an object, or for one volume, behind a progress dialog. `repair_mesh()` reports its
+progress between stages through a callback, which cancels the repair by throwing.
+
+## What the repaired mesh is
+
+The repair keeps what the slicer would print from the input. The slicer fills a layer where the winding number of
+the input surface is not zero (`MeshSlicingParams::SlicingMode::Regular` uses Clipper's nonzero fill rule), so:
+
+- Shells crossing each other print as their union. The repair keeps them as separate shells, as the parts of an
+  object are kept, and makes each of them an outward oriented solid.
+- A shell inside a solid that is oriented like it adds nothing, and the repair removes it.
+- A shell inside a solid that is oriented inward is a cavity, and stays one.
+- A whole mesh turned inside out prints as a solid, and the repair turns it outward.
+
+On top of that, it closes holes and cracks, gives inconsistently oriented triangles the orientation of their
+neighbours, drops degenerate, duplicate and stray flat geometry, and removes small self-intersections inside a shell,
+such as slivers and folds. Where none of this applies, it reports the mesh as unmodified and the caller keeps the
+original mesh, its painting and its object id.
+
+A volume is repaired in place and is never split into several parts: splitting by connectivity would turn a cavity
+into a separate solid part and fill it. Each solid of the result is a shell of its own, so *Split to parts* still
+separates them. Open pieces of the input whose borders meet exactly, which are pieces of one surface rather than
+solids, come out as the one shell they form.
+
+## Pipeline
+
+The input is treated as a triangle soup. Every stage after the first only runs on what the previous ones could
+not settle, so a valid mesh passes through quickly.
+
+### Valid parts first
+
+Parts of the input that are connected by vertex indices and are already closed, consistently oriented 2-manifolds
+skip the soup stages and go straight to the shell stages. Merging their points with coincident points of other
+parts would only make non-manifold junctions out of solids that touch, for example parts of an assembly exported
+together or voxels written as separate cubes.
+
+### Soup clean-up
+
+The rest of the soup has its coincident points merged. Triangles with repeated corners are dropped. Coincident
+triangles of opposite orientation are a wall between two solids touching face to face, so they cancel in pairs;
+of the remaining copies of a triangle one is kept. A connected region that would vanish entirely through
+cancelling is a two-sided export instead (every face written in both orientations), and keeps one copy of each
+triangle.
+
+Open edges then get their vertices welded within a tolerance of 1e-4 of the bounding box diagonal, which closes the
+cracks some exporters leave between triangles that should share corners. A vertex is never welded further than a
+quarter of its shortest edge, so welding cannot collapse fine detail. A soup that stays mostly open after welding has
+cracks wider than that tolerance, and is welded again with ten and then a hundred times the tolerance.
+
+### Work units
+
+The soup is cut into units repaired independently and in parallel: its connected parts, except that open parts whose
+bounding boxes touch share a unit, so that cracks and T-junctions between separately exported patches still close.
+
+### Building the mesh
+
+A unit whose edges are each shared by at most two triangles, running in opposite directions, and whose vertices each
+have a single fan of triangles, becomes a `Surface_mesh` directly. Any other unit is oriented first. Triangles are
+flipped so that neighbours across an edge shared by two of them agree, each part keeping the orientation the
+majority of its area had, which keeps inward oriented cavities inward. Edges where that is impossible or that more
+than two triangles share are cut, and each fan of triangles around a vertex gets its own copy of the vertex. If that
+still leaves an invalid mesh, CGAL's `orient_polygon_soup()` orients the unit instead, and the parts it flipped
+against their majority are reversed back. The linear pass exists because `orient_polygon_soup()` is several times
+slower on large soups that need only a few fixes.
+
+### Closing
+
+Compatible borders are stitched, parts that can be stitched once reversed are merged, and borders still open are
+snapped onto each other within the weld tolerance, which closes T-junctions. Exactly degenerate faces are removed.
+
+Holes are filled last. Planar border loops that face each other in one plane, one inside the other, bound a single
+region, such as a missing annulus at the end of a tube or a cap with features standing on it. Such a group is
+triangulated at once with a 2D constrained Delaunay triangulation that fills only the faces at odd nesting depth,
+so the openings inside the region stay open. The patch is used only if it closes every loop with the orientation
+of the triangles around it. Every other loop is filled on its own with `triangulate_hole()`, which uses a 2D
+constrained Delaunay triangulation when the loop is planar. Otherwise it searches the best triangulation among all
+triangles over the loop for loops of up to 100 edges, and among the triangles of a 3D Delaunay triangulation for
+longer ones, as the full search is cubic in the length of the loop. Beyond 200 edges the full search is not even
+used as a fallback, and a fan around the loop's centroid closes a loop nothing else could.
+
+The closed unit is split into its shells. The largest stays in place and the others are copied out, as converting
+the whole mesh again costs seconds on large models.
+
+### Shells
+
+The shells of all units, together with the valid parts set aside at the start, are handled independently and in
+parallel. Shells enclosing no volume, which hole filling makes out of stray flat patches, are dropped.
+
+Self-intersections inside a shell are removed locally with `experimental::remove_self_intersections()`, which
+remeshes the region around them. It is used only for local defects: a shell whose intersections involve more than
+5 % of its faces is left as it is, and a result that changes the enclosed volume by more than 0.1 % is undone. On
+heavily overlapping ornamental models the remeshing otherwise cuts parts down to slivers, while on genuine defects
+it changes the volume by thousandths of a percent. Overlaps left in place slice correctly. Remeshing can cut
+small pieces off a shell, so a shell it changed is split again and its pieces enclosing no volume are dropped.
+
+Shells crossing others are found through their bounding boxes and an AABB tree per shell, and are made outward
+oriented solids. For every other shell the winding number just outside it is summed from the orientation of the
+shells containing it, tested from a point on its largest face. The shell bounds the solid only if the winding
+number is zero on exactly one of its sides; it is then oriented so that the solid is inside, or dropped otherwise.
+
+Crossing shells are not united. Slicing unites them anyway, uniting them exactly costs tens of seconds on models
+made of many overlapping pieces, and it would fuse parts that *Split to parts* should keep apart.
+
+## Robustness
+
+The repair avoids `experimental::autorefine_and_remove_self_intersections()` and corefinement, which can crash on
+messy input, and uses only steps whose failures it can detect. A step that fails keeps its input. CGAL precondition
+failures surface as `repair_mesh()` returning false with the message as the error. The output is written in float,
+as every mesh in the application is.
+
+The result does not depend on thread scheduling. `libslic3r_cgal` is built with `CGAL_LINKED_WITH_TBB`. Units and
+shells are processed in parallel, but each on its own data, and their results are gathered in a fixed order;
+sorts compare complete keys, and the detected self-intersections are put in order before they are used. Snapping
+stays sequential, as its parallel version gives different results from run to run. Holes are filled with the full
+search wherever it is affordable, because the search among Delaunay triangles can choose between equally good fills
+differently from run to run, so only non-planar holes of more than 100 edges may still vary. On some inputs
+`experimental::remove_self_intersections()` itself places a few vertices differently from run to run.
+
+## Verification
+
+`tests/libslic3r/test_mesh_repair.cpp` covers each kind of defect above on small meshes with known volumes.
@@ -62,23 +62,6 @@ Clipper2 behaves differently by default, the wrapper adjusts it.
  clip do not leave slivers.
 - Open polylines are clipped with the non-zero rule and keep their direction.

-### Tiled booleans
-
-The sweep slows down with the number of edges crossing a scan line, so a layer
-cut into thousands of pieces makes every whole-layer boolean expensive.
-`diff_ex_by_piece()` and `intersection_ex_by_piece()` take a subject of
-non-overlapping `ExPolygons`, group them into tiles with
-`ClipperUtils::tile_expolygons()`, and run each tile in parallel against only
-the clip polygons near it, cut to the tile's box. Below 128 pieces there is a
-single tile, and they are the plain `diff_ex()` / `intersection_ex()`.
-
-The result covers the same area as the plain call. Without the safety offset
-the rings are the same. With it, each tile unites only the clip polygons near
-it, so a clip edge that the whole-layer union splits where it crosses a distant
-clip polygon stays whole, and a crossing with the subject can round 1 unit
-differently. The tiles' results are concatenated in tile order, so the order of
-the output `ExPolygons` differs from the plain call.
-
 ### Offsets

 - Before offsetting, input vertices closer than
@@ -7478,7 +7478,7 @@ msgid "Update"
 msgstr "更新"

 msgid "Assistant(HMS)"
-msgstr "助理（HMS）"
+msgstr "助手(HMS)"

 #, c-format, boost-format
 msgid "Network plug-in v%s"
@@ -0,0 +1,3 @@
+<svg width="28" height="27" viewBox="0 0 28 27" fill="none" xmlns="http://www.w3.org/2000/svg">
+<path transform="matrix(0.9 0 0 0.9 1.4 1.35)" d="M11.9888 2.01601C12.8984 0.494662 15.1024 0.494662 16.012 2.01601L18.8677 6.79237C19.1958 7.34113 19.7339 7.73201 20.3572 7.87447L25.7821 9.11446C27.5101 9.50943 28.1913 11.6056 27.0254 12.9408L23.3652 17.1327C22.9449 17.6143 22.7394 18.2469 22.7964 18.8836L23.2936 24.4263C23.4519 26.1918 21.6687 27.4873 20.0386 26.7911L14.9209 24.6056C14.3329 24.3545 13.6679 24.3545 13.0799 24.6056L7.96209 26.7911C6.33196 27.4873 4.54887 26.1918 4.70722 24.4263L5.20434 18.8836C5.26145 18.2469 5.05595 17.6143 4.63544 17.1327L0.97533 12.9408C-0.19048 11.6056 0.490599 9.50943 2.21859 9.11446L7.64364 7.87447C8.2669 7.73201 8.80494 7.34113 9.13302 6.79237L11.9888 2.01601Z" stroke="#949494" stroke-width="2.4" stroke-linejoin="round"/>
+</svg>
@@ -1,7 +1,7 @@
 {
 	"name": "Bambulab",
 	"url": "http://www.bambulab.com/Parameters/vendor/BBL.json",
-	"version": "02.08.00.14",
+	"version": "02.08.00.15",
 	"force_update": "0",
 	"description": "the initial version of BBL configurations",
 	"machine_model_list": [
@@ -0,0 +1,790 @@
+{
+	"name": "FELIX Printers",
+	"version": "1.0.0",
+	"force_update": "0",
+	"description": "Configuration file for printers by FELIX Printers",
+	"machine_model_list": [
+		{
+			"name": "FELIX Food Double",
+			"sub_path": "machine/FELIX Food Double.json"
+		},
+		{
+			"name": "FELIX Food Single",
+			"sub_path": "machine/FELIX Food Single.json"
+		},
+		{
+			"name": "FELIX Food Switch",
+			"sub_path": "machine/FELIX Food Switch.json"
+		},
+		{
+			"name": "FELIX Pro 3",
+			"sub_path": "machine/FELIX Pro 3.json"
+		},
+		{
+			"name": "FELIX Pro L 3.0",
+			"sub_path": "machine/FELIX Pro L 3.0.json"
+		},
+		{
+			"name": "FELIX Pro XL 3.0",
+			"sub_path": "machine/FELIX Pro XL 3.0.json"
+		},
+		{
+			"name": "FELIX Tec 4",
+			"sub_path": "machine/FELIX Tec 4.json"
+		}
+	],
+	"machine_list": [
+		{
+			"name": "fdm_all_machines_common",
+			"sub_path": "machine/fdm_all_machines_common.json"
+		},
+		{
+			"name": "fdm_felix_food_common",
+			"sub_path": "machine/fdm_felix_food_common.json"
+		},
+		{
+			"name": "fdm_felix_food_double_common",
+			"sub_path": "machine/fdm_felix_food_double_common.json"
+		},
+		{
+			"name": "fdm_felix_food_switch_common",
+			"sub_path": "machine/fdm_felix_food_switch_common.json"
+		},
+		{
+			"name": "fdm_felix_plastic_common",
+			"sub_path": "machine/fdm_felix_plastic_common.json"
+		},
+		{
+			"name": "fdm_felix_pro_3_common",
+			"sub_path": "machine/fdm_felix_pro_3_common.json"
+		},
+		{
+			"name": "fdm_felix_pro_l_3_common",
+			"sub_path": "machine/fdm_felix_pro_l_3.json"
+		},
+		{
+			"name": "fdm_felix_pro_xl_3_common",
+			"sub_path": "machine/fdm_felix_pro_xl_3_common.json"
+		},
+		{
+			"name": "fdm_felix_tec_common",
+			"sub_path": "machine/fdm_felix_tec_common.json"
+		},
+		{
+			"name": "FELIX Food Single 0.50mm nozzle",
+			"sub_path": "machine/FELIX Food Single 0.50mm nozzle.json"
+		},
+		{
+			"name": "FELIX Food Single 1.00mm nozzle",
+			"sub_path": "machine/FELIX Food Single 1.00mm nozzle.json"
+		},
+		{
+			"name": "FELIX Food Single 2.00mm nozzle",
+			"sub_path": "machine/FELIX Food Single 2.00mm nozzle.json"
+		},
+		{
+			"name": "FELIX Food Single 3.00mm nozzle",
+			"sub_path": "machine/FELIX Food Single 3.00mm nozzle.json"
+		},
+		{
+			"name": "FELIX Food Single 4.00mm nozzle",
+			"sub_path": "machine/FELIX Food Single 4.00mm nozzle.json"
+		},
+		{
+			"name": "FELIX Food Double 0.50mm nozzle",
+			"sub_path": "machine/FELIX Food Double 0.50mm nozzle.json"
+		},
+		{
+			"name": "FELIX Food Double 1.00mm nozzle",
+			"sub_path": "machine/FELIX Food Double 1.00mm nozzle.json"
+		},
+		{
+			"name": "FELIX Food Double 2.00mm nozzle",
+			"sub_path": "machine/FELIX Food Double 2.00mm nozzle.json"
+		},
+		{
+			"name": "FELIX Food Double 3.00mm nozzle",
+			"sub_path": "machine/FELIX Food Double 3.00mm nozzle.json"
+		},
+		{
+			"name": "FELIX Food Double 4.00mm nozzle",
+			"sub_path": "machine/FELIX Food Double 4.00mm nozzle.json"
+		},
+		{
+			"name": "FELIX Food Switch 0.50mm nozzle",
+			"sub_path": "machine/FELIX Food Switch 0.50mm nozzle.json"
+		},
+		{
+			"name": "FELIX Food Switch 1.00mm nozzle",
+			"sub_path": "machine/FELIX Food Switch 1.00mm nozzle.json"
+		},
+		{
+			"name": "FELIX Food Switch 2.00mm nozzle",
+			"sub_path": "machine/FELIX Food Switch 2.00mm nozzle.json"
+		},
+		{
+			"name": "FELIX Food Switch 3.00mm nozzle",
+			"sub_path": "machine/FELIX Food Switch 3.00mm nozzle.json"
+		},
+		{
+			"name": "FELIX Food Switch 4.00mm nozzle",
+			"sub_path": "machine/FELIX Food Switch 4.00mm nozzle.json"
+		},
+		{
+			"name": "FELIX Pro 3 0.25mm nozzle",
+			"sub_path": "machine/FELIX Pro 3 0.25mm nozzle.json"
+		},
+		{
+			"name": "FELIX Pro 3 0.35mm nozzle",
+			"sub_path": "machine/FELIX Pro 3 0.35mm nozzle.json"
+		},
+		{
+			"name": "FELIX Pro 3 0.50mm nozzle",
+			"sub_path": "machine/FELIX Pro 3 0.50mm nozzle.json"
+		},
+		{
+			"name": "FELIX Pro 3 0.70mm nozzle",
+			"sub_path": "machine/FELIX Pro 3 0.70mm nozzle.json"
+		},
+		{
+			"name": "FELIX Pro L 3.0 0.25mm nozzle",
+			"sub_path": "machine/FELIX Pro L 3.0 0.25mm nozzle.json"
+		},
+		{
+			"name": "FELIX Pro L 3.0 0.35mm nozzle",
+			"sub_path": "machine/FELIX Pro L 3.0 0.35mm nozzle.json"
+		},
+		{
+			"name": "FELIX Pro L 3.0 0.50mm nozzle",
+			"sub_path": "machine/FELIX Pro L 3.0 0.50mm nozzle.json"
+		},
+		{
+			"name": "FELIX Pro L 3.0 0.70mm nozzle",
+			"sub_path": "machine/FELIX Pro L 3.0 0.70mm nozzle.json"
+		},
+		{
+			"name": "FELIX Pro XL 3.0 0.25mm nozzle",
+			"sub_path": "machine/FELIX Pro XL 3.0 0.25mm nozzle.json"
+		},
+		{
+			"name": "FELIX Pro XL 3.0 0.35mm nozzle",
+			"sub_path": "machine/FELIX Pro XL 3.0 0.35mm nozzle.json"
+		},
+		{
+			"name": "FELIX Pro XL 3.0 0.50mm nozzle",
+			"sub_path": "machine/FELIX Pro XL 3.0 0.50mm nozzle.json"
+		},
+		{
+			"name": "FELIX Pro XL 3.0 0.70mm nozzle",
+			"sub_path": "machine/FELIX Pro XL 3.0 0.70mm nozzle.json"
+		},
+		{
+			"name": "FELIX Tec 4 0.25mm nozzle",
+			"sub_path": "machine/FELIX Tec 4 0.25mm nozzle.json"
+		},
+		{
+			"name": "FELIX Tec 4 0.35mm nozzle",
+			"sub_path": "machine/FELIX Tec 4 0.35mm nozzle.json"
+		},
+		{
+			"name": "FELIX Tec 4 0.50mm nozzle",
+			"sub_path": "machine/FELIX Tec 4 0.50mm nozzle.json"
+		},
+		{
+			"name": "FELIX Tec 4 0.70mm nozzle",
+			"sub_path": "machine/FELIX Tec 4 0.70mm nozzle.json"
+		}
+	],
+	"process_list": [
+		{
+			"name": "fdm_process_common",
+			"sub_path": "process/fdm_process_common.json"
+		},
+		{
+			"name": "fdm_process_felix_food_common",
+			"sub_path": "process/fdm_process_felix_food_common.json"
+		},
+		{
+			"name": "fdm_process_felix_plastic_common",
+			"sub_path": "process/fdm_process_felix_plastic_common.json"
+		},
+		{
+			"name": "FELIX Food Coarse @ 0.50mm",
+			"sub_path": "process/FELIX Food Coarse @ 0.50mm.json"
+		},
+		{
+			"name": "FELIX Food Coarse @ 1.00mm",
+			"sub_path": "process/FELIX Food Coarse @ 1.00mm.json"
+		},
+		{
+			"name": "FELIX Food Coarse @ 2.00mm",
+			"sub_path": "process/FELIX Food Coarse @ 2.00mm.json"
+		},
+		{
+			"name": "FELIX Food Coarse @ 3.00mm",
+			"sub_path": "process/FELIX Food Coarse @ 3.00mm.json"
+		},
+		{
+			"name": "FELIX Food Coarse @ 4.00mm",
+			"sub_path": "process/FELIX Food Coarse @ 4.00mm.json"
+		},
+		{
+			"name": "FELIX Food Fine @ 0.50mm",
+			"sub_path": "process/FELIX Food Fine @ 0.50mm.json"
+		},
+		{
+			"name": "FELIX Food Fine @ 1.00mm",
+			"sub_path": "process/FELIX Food Fine @ 1.00mm.json"
+		},
+		{
+			"name": "FELIX Food Fine @ 2.00mm",
+			"sub_path": "process/FELIX Food Fine @ 2.00mm.json"
+		},
+		{
+			"name": "FELIX Food Fine @ 3.00mm",
+			"sub_path": "process/FELIX Food Fine @ 3.00mm.json"
+		},
+		{
+			"name": "FELIX Food Fine @ 4.00mm",
+			"sub_path": "process/FELIX Food Fine @ 4.00mm.json"
+		},
+		{
+			"name": "FELIX Food Normal @ 0.50mm",
+			"sub_path": "process/FELIX Food Normal @ 0.50mm.json"
+		},
+		{
+			"name": "FELIX Food Normal @ 1.00mm",
+			"sub_path": "process/FELIX Food Normal @ 1.00mm.json"
+		},
+		{
+			"name": "FELIX Food Normal @ 2.00mm",
+			"sub_path": "process/FELIX Food Normal @ 2.00mm.json"
+		},
+		{
+			"name": "FELIX Food Normal @ 3.00mm",
+			"sub_path": "process/FELIX Food Normal @ 3.00mm.json"
+		},
+		{
+			"name": "FELIX Food Normal @ 4.00mm",
+			"sub_path": "process/FELIX Food Normal @ 4.00mm.json"
+		},
+		{
+			"name": "FELIX Plastic Coarse @ 0.35mm",
+			"sub_path": "process/FELIX Plastic Coarse @ 0.35mm.json"
+		},
+		{
+			"name": "FELIX Plastic Coarse @ 0.50mm",
+			"sub_path": "process/FELIX Plastic Coarse @ 0.50mm.json"
+		},
+		{
+			"name": "FELIX Plastic Coarse @ 0.70mm",
+			"sub_path": "process/FELIX Plastic Coarse @ 0.70mm.json"
+		},
+		{
+			"name": "FELIX Plastic Fine @ 0.25mm",
+			"sub_path": "process/FELIX Plastic Fine @ 0.25mm.json"
+		},
+		{
+			"name": "FELIX Plastic Fine @ 0.35mm",
+			"sub_path": "process/FELIX Plastic Fine @ 0.35mm.json"
+		},
+		{
+			"name": "FELIX Plastic Fine @ 0.50mm",
+			"sub_path": "process/FELIX Plastic Fine @ 0.50mm.json"
+		},
+		{
+			"name": "FELIX Plastic Fine @ 0.70mm",
+			"sub_path": "process/FELIX Plastic Fine @ 0.70mm.json"
+		},
+		{
+			"name": "FELIX Plastic Normal @ 0.25mm",
+			"sub_path": "process/FELIX Plastic Normal @ 0.25mm.json"
+		},
+		{
+			"name": "FELIX Plastic Normal @ 0.35mm",
+			"sub_path": "process/FELIX Plastic Normal @ 0.35mm.json"
+		},
+		{
+			"name": "FELIX Plastic Normal @ 0.50mm",
+			"sub_path": "process/FELIX Plastic Normal @ 0.50mm.json"
+		},
+		{
+			"name": "FELIX Plastic Normal @ 0.70mm",
+			"sub_path": "process/FELIX Plastic Normal @ 0.70mm.json"
+		},
+		{
+			"name": "FELIX Plastic Slightly Coarse @ 0.35mm",
+			"sub_path": "process/FELIX Plastic Slightly Coarse @ 0.35mm.json"
+		},
+		{
+			"name": "FELIX Plastic Slightly Coarse @ 0.50mm",
+			"sub_path": "process/FELIX Plastic Slightly Coarse @ 0.50mm.json"
+		},
+		{
+			"name": "FELIX Plastic Slightly Coarse @ 0.70mm",
+			"sub_path": "process/FELIX Plastic Slightly Coarse @ 0.70mm.json"
+		},
+		{
+			"name": "FELIX Plastic Super Coarse @ 0.70mm",
+			"sub_path": "process/FELIX Plastic Super Coarse @ 0.70mm.json"
+		},
+		{
+			"name": "FELIX Plastic Super Fine @ 0.25mm",
+			"sub_path": "process/FELIX Plastic Super Fine @ 0.25mm.json"
+		},
+		{
+			"name": "FELIX Plastic Super Fine @ 0.35mm",
+			"sub_path": "process/FELIX Plastic Super Fine @ 0.35mm.json"
+		},
+		{
+			"name": "FELIX Plastic Very Coarse @ 0.50mm",
+			"sub_path": "process/FELIX Plastic Very Coarse @ 0.50mm.json"
+		},
+		{
+			"name": "FELIX Plastic Very Coarse @ 0.70mm",
+			"sub_path": "process/FELIX Plastic Very Coarse @ 0.70mm.json"
+		},
+		{
+			"name": "FELIX Plastic Very Fine @ 0.25mm",
+			"sub_path": "process/FELIX Plastic Very Fine @ 0.25mm.json"
+		},
+		{
+			"name": "FELIX Plastic Very Fine @ 0.35mm",
+			"sub_path": "process/FELIX Plastic Very Fine @ 0.35mm.json"
+		},
+		{
+			"name": "FELIX Plastic Very Fine @ 0.50mm",
+			"sub_path": "process/FELIX Plastic Very Fine @ 0.50mm.json"
+		}
+	],
+	"filament_list": [
+		{
+			"name": "fdm_filament_common",
+			"sub_path": "filament/fdm_filament_common.json"
+		},
+		{
+			"name": "fdm_filament_food",
+			"sub_path": "filament/fdm_filament_food.json"
+		},
+		{
+			"name": "fdm_filament_abs",
+			"sub_path": "filament/fdm_filament_abs.json"
+		},
+		{
+			"name": "fdm_filament_asa",
+			"sub_path": "filament/fdm_filament_asa.json"
+		},
+		{
+			"name": "fdm_filament_flex",
+			"sub_path": "filament/fdm_filament_flex.json"
+		},
+		{
+			"name": "fdm_filament_pa",
+			"sub_path": "filament/fdm_filament_pa.json"
+		},
+		{
+			"name": "fdm_filament_pa11cf",
+			"sub_path": "filament/fdm_filament_pa11cf.json"
+		},
+		{
+			"name": "fdm_filament_pc",
+			"sub_path": "filament/fdm_filament_pc.json"
+		},
+		{
+			"name": "fdm_filament_pccf",
+			"sub_path": "filament/fdm_filament_pccf.json"
+		},
+		{
+			"name": "fdm_filament_pet",
+			"sub_path": "filament/fdm_filament_pet.json"
+		},
+		{
+			"name": "fdm_filament_pla",
+			"sub_path": "filament/fdm_filament_pla.json"
+		},
+		{
+			"name": "fdm_filament_pva",
+			"sub_path": "filament/fdm_filament_pva.json"
+		},
+		{
+			"name": "fdm_filament_pvb",
+			"sub_path": "filament/fdm_filament_pvb.json"
+		},
+		{
+			"name": "fdm_filament_tpu",
+			"sub_path": "filament/fdm_filament_tpu.json"
+		},
+		{
+			"name": "Food Medium Plastic Syringe @0.50mm",
+			"sub_path": "filament/FELIXFood/Food Medium Plastic Syringe @0.50mm.json"
+		},
+		{
+			"name": "Food Medium Plastic Syringe @1.00mm",
+			"sub_path": "filament/FELIXFood/Food Medium Plastic Syringe @1.00mm.json"
+		},
+		{
+			"name": "Food Medium Plastic Syringe @2.00mm",
+			"sub_path": "filament/FELIXFood/Food Medium Plastic Syringe @2.00mm.json"
+		},
+		{
+			"name": "Food Medium Plastic Syringe @3.00mm",
+			"sub_path": "filament/FELIXFood/Food Medium Plastic Syringe @3.00mm.json"
+		},
+		{
+			"name": "Food Medium Plastic Syringe @4.00mm",
+			"sub_path": "filament/FELIXFood/Food Medium Plastic Syringe @4.00mm.json"
+		},
+		{
+			"name": "Food Medium Stainless Steel Syringe @0.50mm",
+			"sub_path": "filament/FELIXFood/Food Medium Stainless Steel Syringe @0.50mm.json"
+		},
+		{
+			"name": "Food Medium Stainless Steel Syringe @1.00mm",
+			"sub_path": "filament/FELIXFood/Food Medium Stainless Steel Syringe @1.00mm.json"
+		},
+		{
+			"name": "Food Medium Stainless Steel Syringe @2.00mm",
+			"sub_path": "filament/FELIXFood/Food Medium Stainless Steel Syringe @2.00mm.json"
+		},
+		{
+			"name": "Food Medium Stainless Steel Syringe @3.00mm",
+			"sub_path": "filament/FELIXFood/Food Medium Stainless Steel Syringe @3.00mm.json"
+		},
+		{
+			"name": "Food Medium Stainless Steel Syringe @4.00mm",
+			"sub_path": "filament/FELIXFood/Food Medium Stainless Steel Syringe @4.00mm.json"
+		},
+		{
+			"name": "Food Thick Stainless Steel Syringe @0.50mm",
+			"sub_path": "filament/FELIXFood/Food Thick Stainless Steel Syringe @0.50mm.json"
+		},
+		{
+			"name": "Food Thick Stainless Steel Syringe @1.00mm",
+			"sub_path": "filament/FELIXFood/Food Thick Stainless Steel Syringe @1.00mm.json"
+		},
+		{
+			"name": "Food Thick Stainless Steel Syringe @2.00mm",
+			"sub_path": "filament/FELIXFood/Food Thick Stainless Steel Syringe @2.00mm.json"
+		},
+		{
+			"name": "Food Thick Stainless Steel Syringe @3.00mm",
+			"sub_path": "filament/FELIXFood/Food Thick Stainless Steel Syringe @3.00mm.json"
+		},
+		{
+			"name": "Food Thick Stainless Steel Syringe @4.00mm",
+			"sub_path": "filament/FELIXFood/Food Thick Stainless Steel Syringe @4.00mm.json"
+		},
+		{
+			"name": "Food Thin Plastic Syringe @0.50mm",
+			"sub_path": "filament/FELIXFood/Food Thin Plastic Syringe @0.50mm.json"
+		},
+		{
+			"name": "Food Thin Plastic Syringe @1.00mm",
+			"sub_path": "filament/FELIXFood/Food Thin Plastic Syringe @1.00mm.json"
+		},
+		{
+			"name": "Food Thin Plastic Syringe @2.00mm",
+			"sub_path": "filament/FELIXFood/Food Thin Plastic Syringe @2.00mm.json"
+		},
+		{
+			"name": "Food Thin Plastic Syringe @3.00mm",
+			"sub_path": "filament/FELIXFood/Food Thin Plastic Syringe @3.00mm.json"
+		},
+		{
+			"name": "Food Thin Plastic Syringe @4.00mm",
+			"sub_path": "filament/FELIXFood/Food Thin Plastic Syringe @4.00mm.json"
+		},
+		{
+			"name": "Food Thin Stainless Steel Syringe @0.50mm",
+			"sub_path": "filament/FELIXFood/Food Thin Stainless Steel Syringe @0.50mm.json"
+		},
+		{
+			"name": "Food Thin Stainless Steel Syringe @1.00mm",
+			"sub_path": "filament/FELIXFood/Food Thin Stainless Steel Syringe @1.00mm.json"
+		},
+		{
+			"name": "Food Thin Stainless Steel Syringe @2.00mm",
+			"sub_path": "filament/FELIXFood/Food Thin Stainless Steel Syringe @2.00mm.json"
+		},
+		{
+			"name": "Food Thin Stainless Steel Syringe @3.00mm",
+			"sub_path": "filament/FELIXFood/Food Thin Stainless Steel Syringe @3.00mm.json"
+		},
+		{
+			"name": "Food Thin Stainless Steel Syringe @4.00mm",
+			"sub_path": "filament/FELIXFood/Food Thin Stainless Steel Syringe @4.00mm.json"
+		},
+		{
+			"name": "Food Very Thick Stainless Steel Syringe @1.00mm",
+			"sub_path": "filament/FELIXFood/Food Very Thick Stainless Steel Syringe @1.00mm.json"
+		},
+		{
+			"name": "Food Very Thick Stainless Steel Syringe @2.00mm",
+			"sub_path": "filament/FELIXFood/Food Very Thick Stainless Steel Syringe @2.00mm.json"
+		},
+		{
+			"name": "Food Very Thick Stainless Steel Syringe @3.00mm",
+			"sub_path": "filament/FELIXFood/Food Very Thick Stainless Steel Syringe @3.00mm.json"
+		},
+		{
+			"name": "Food Very Thick Stainless Steel Syringe @4.00mm",
+			"sub_path": "filament/FELIXFood/Food Very Thick Stainless Steel Syringe @4.00mm.json"
+		},
+		{
+			"name": "Food Very Thin Plastic Syringe @0.50mm",
+			"sub_path": "filament/FELIXFood/Food Very Thin Plastic Syringe @0.50mm.json"
+		},
+		{
+			"name": "Food Very Thin Plastic Syringe @1.00mm",
+			"sub_path": "filament/FELIXFood/Food Very Thin Plastic Syringe @1.00mm.json"
+		},
+		{
+			"name": "Food Very Thin Plastic Syringe @2.00mm",
+			"sub_path": "filament/FELIXFood/Food Very Thin Plastic Syringe @2.00mm.json"
+		},
+		{
+			"name": "Food Very Thin Plastic Syringe @3.00mm",
+			"sub_path": "filament/FELIXFood/Food Very Thin Plastic Syringe @3.00mm.json"
+		},
+		{
+			"name": "Food Very Thin Plastic Syringe @4.00mm",
+			"sub_path": "filament/FELIXFood/Food Very Thin Plastic Syringe @4.00mm.json"
+		},
+		{
+			"name": "Food Very Thin Stainless Steel  Syringe  @1.00mm",
+			"sub_path": "filament/FELIXFood/Food Very Thin Stainless Steel  Syringe  @1.00mm.json"
+		},
+		{
+			"name": "Food Very Thin Stainless Steel  Syringe  @2.00mm",
+			"sub_path": "filament/FELIXFood/Food Very Thin Stainless Steel  Syringe  @2.00mm.json"
+		},
+		{
+			"name": "Food Very Thin Stainless Steel  Syringe  @3.00mm",
+			"sub_path": "filament/FELIXFood/Food Very Thin Stainless Steel  Syringe  @3.00mm.json"
+		},
+		{
+			"name": "Food Very Thin Stainless Steel  Syringe  @4.00mm",
+			"sub_path": "filament/FELIXFood/Food Very Thin Stainless Steel  Syringe  @4.00mm.json"
+		},
+		{
+			"name": "Food Very Thin Stainless Steel Syringe @0.50mm",
+			"sub_path": "filament/FELIXFood/Food Very Thin Stainless Steel Syringe @0.50mm.json"
+		},
+		{
+			"name": "FORMFUTURA TitanX ABS Brass @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA TitanX ABS Brass @ 0.35mm.json"
+		},
+		{
+			"name": "FORMFUTURA TitanX ABS Brass @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA TitanX ABS Brass @ 0.50mm.json"
+		},
+		{
+			"name": "FORMFUTURA TitanX ABS Hardened Steel @ 0.25mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA TitanX ABS Hardened Steel @ 0.25mm.json"
+		},
+		{
+			"name": "FORMFUTURA TitanX ABS Hardened Steel @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA TitanX ABS Hardened Steel @ 0.35mm.json"
+		},
+		{
+			"name": "FORMFUTURA TitanX ABS Hardened Steel @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA TitanX ABS Hardened Steel @ 0.50mm.json"
+		},
+		{
+			"name": "FORMFUTURA TitanX ABS Hardened Steel @ 0.70mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA TitanX ABS Hardened Steel @ 0.70mm.json"
+		},
+		{
+			"name": "Ultrafuse ABS Fusion+ Brass @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/Ultrafuse ABS Fusion+ Brass @ 0.35mm.json"
+		},
+		{
+			"name": "Ultrafuse ABS Fusion+ Brass @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/Ultrafuse ABS Fusion+ Brass @ 0.50mm.json"
+		},
+		{
+			"name": "Ultrafuse ABS Fusion+ Hardened Steel @ 0.25mm",
+			"sub_path": "filament/FELIXPlastic/Ultrafuse ABS Fusion+ Hardened Steel @ 0.25mm.json"
+		},
+		{
+			"name": "Ultrafuse ABS Fusion+ Hardened Steel @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/Ultrafuse ABS Fusion+ Hardened Steel @ 0.35mm.json"
+		},
+		{
+			"name": "Ultrafuse ABS Fusion+ Hardened Steel @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/Ultrafuse ABS Fusion+ Hardened Steel @ 0.50mm.json"
+		},
+		{
+			"name": "Ultrafuse ABS Fusion+ Hardened Steel @ 0.70mm",
+			"sub_path": "filament/FELIXPlastic/Ultrafuse ABS Fusion+ Hardened Steel @ 0.70mm.json"
+		},
+		{
+			"name": "FORMFUTURA AppoloX ASA Brass @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA AppoloX ASA Brass @ 0.35mm.json"
+		},
+		{
+			"name": "FORMFUTURA AppoloX ASA Brass @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA AppoloX ASA Brass @ 0.50mm.json"
+		},
+		{
+			"name": "FORMFUTURA AppoloX ASA Hardened Steel @ 0.25mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA AppoloX ASA Hardened Steel @ 0.25mm.json"
+		},
+		{
+			"name": "FORMFUTURA AppoloX ASA Hardened Steel @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA AppoloX ASA Hardened Steel @ 0.35mm.json"
+		},
+		{
+			"name": "FORMFUTURA AppoloX ASA Hardened Steel @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA AppoloX ASA Hardened Steel @ 0.50mm.json"
+		},
+		{
+			"name": "FORMFUTURA AppoloX ASA Hardened Steel @ 0.70mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA AppoloX ASA Hardened Steel @ 0.70mm.json"
+		},
+		{
+			"name": "FELIX FLEX  Brass @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/FELIX FLEX  Brass @ 0.35mm.json"
+		},
+		{
+			"name": "FELIX FLEX  Brass @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/FELIX FLEX  Brass @ 0.50mm.json"
+		},
+		{
+			"name": "FELIX FLEX Hardened Steel @ 0.25mm",
+			"sub_path": "filament/FELIXPlastic/FELIX FLEX Hardened Steel @ 0.25mm.json"
+		},
+		{
+			"name": "FELIX FLEX Hardened Steel @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/FELIX FLEX Hardened Steel @ 0.35mm.json"
+		},
+		{
+			"name": "FELIX FLEX Hardened Steel @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/FELIX FLEX Hardened Steel @ 0.50mm.json"
+		},
+		{
+			"name": "FELIX FLEX Hardened Steel @ 0.70mm",
+			"sub_path": "filament/FELIXPlastic/FELIX FLEX Hardened Steel @ 0.70mm.json"
+		},
+		{
+			"name": "FELIX PETG Brass @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/FELIX PETG Brass @ 0.35mm.json"
+		},
+		{
+			"name": "FELIX PETG Brass @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/FELIX PETG Brass @ 0.50mm.json"
+		},
+		{
+			"name": "FELIX PETG Hardened Steel @ 0.25mm",
+			"sub_path": "filament/FELIXPlastic/FELIX PETG Hardened Steel @ 0.25mm.json"
+		},
+		{
+			"name": "FELIX PETG Hardened Steel @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/FELIX PETG Hardened Steel @ 0.35mm.json"
+		},
+		{
+			"name": "FELIX PETG Hardened Steel @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/FELIX PETG Hardened Steel @ 0.50mm.json"
+		},
+		{
+			"name": "FELIX PETG Hardened Steel @ 0.70mm",
+			"sub_path": "filament/FELIXPlastic/FELIX PETG Hardened Steel @ 0.70mm.json"
+		},
+		{
+			"name": "FELIX Premium PLA Brass @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/FELIX Premium PLA Brass @ 0.35mm.json"
+		},
+		{
+			"name": "FELIX Premium PLA Brass @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/FELIX Premium PLA Brass @ 0.50mm.json"
+		},
+		{
+			"name": "FELIX Premium PLA Hardened Steel @ 0.25mm",
+			"sub_path": "filament/FELIXPlastic/FELIX Premium PLA Hardened Steel @ 0.25mm.json"
+		},
+		{
+			"name": "FELIX Premium PLA Hardened Steel @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/FELIX Premium PLA Hardened Steel @ 0.35mm.json"
+		},
+		{
+			"name": "FELIX Premium PLA Hardened Steel @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/FELIX Premium PLA Hardened Steel @ 0.50mm.json"
+		},
+		{
+			"name": "FELIX Premium PLA Hardened Steel @ 0.70mm",
+			"sub_path": "filament/FELIXPlastic/FELIX Premium PLA Hardened Steel @ 0.70mm.json"
+		},
+		{
+			"name": "FELIX Wood  Brass @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/FELIX Wood  Brass @ 0.35mm.json"
+		},
+		{
+			"name": "FELIX Wood Brass @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/FELIX Wood Brass @ 0.50mm.json"
+		},
+		{
+			"name": "FELIX Wood Hardened Steel @ 0.25mm",
+			"sub_path": "filament/FELIXPlastic/FELIX Wood Hardened Steel @ 0.25mm.json"
+		},
+		{
+			"name": "FELIX Wood Hardened Steel @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/FELIX Wood Hardened Steel @ 0.35mm.json"
+		},
+		{
+			"name": "FELIX Wood Hardened Steel @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/FELIX Wood Hardened Steel @ 0.50mm.json"
+		},
+		{
+			"name": "FELIX Wood Hardened Steel @ 0.70mm",
+			"sub_path": "filament/FELIXPlastic/FELIX Wood Hardened Steel @ 0.70mm.json"
+		},
+		{
+			"name": "FORMFUTURA ePLA Brass @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA ePLA Brass @ 0.35mm.json"
+		},
+		{
+			"name": "FORMFUTURA ePLA Brass @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA ePLA Brass @ 0.50mm.json"
+		},
+		{
+			"name": "FORMFUTURA ePLA Hardened Steel @ 0.25mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA ePLA Hardened Steel @ 0.25mm.json"
+		},
+		{
+			"name": "FORMFUTURA ePLA Hardened Steel @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA ePLA Hardened Steel @ 0.35mm.json"
+		},
+		{
+			"name": "FORMFUTURA ePLA Hardened Steel @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA ePLA Hardened Steel @ 0.50mm.json"
+		},
+		{
+			"name": "FORMFUTURA ePLA Hardened Steel @ 0.70mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA ePLA Hardened Steel @ 0.70mm.json"
+		},
+		{
+			"name": "FORMFUTURA Aquasolve PVA Brass @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA Aquasolve PVA Brass @ 0.35mm.json"
+		},
+		{
+			"name": "FORMFUTURA Aquasolve PVA Brass @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA Aquasolve PVA Brass @ 0.50mm.json"
+		},
+		{
+			"name": "FORMFUTURA Aquasolve PVA Hardened Steel @ 0.25mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA Aquasolve PVA Hardened Steel @ 0.25mm.json"
+		},
+		{
+			"name": "FORMFUTURA Aquasolve PVA Hardened Steel @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA Aquasolve PVA Hardened Steel @ 0.35mm.json"
+		},
+		{
+			"name": "FORMFUTURA Aquasolve PVA Hardened Steel @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA Aquasolve PVA Hardened Steel @ 0.50mm.json"
+		},
+		{
+			"name": "FORMFUTURA Aquasolve PVA Hardened Steel @ 0.70mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA Aquasolve PVA Hardened Steel @ 0.70mm.json"
+		}
+	]
+}
@@ -0,0 +1,28 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<svg id="a" xmlns="http://www.w3.org/2000/svg" width="180.62mm" height="180.62mm" viewBox="0 0 512 512" xmlns:c2pa="http://c2pa.org/manifest">
+  <rect x="0" y="0" width="512" height="512" fill="none"/>
+  <g fill="#ffffff" transform="translate(5,460) scale(0.2)">
+    <g>
+      <path d="M139.4.8l-.2,62c-34.3,0-63.4,21.8-73.2,51.9C26.4,141,.2,187.8.2,241.3H0l.2-101.3C.2,63.1,62.4.8,139.4.8Z"/>
+      <path d="M139.1,92.5l-.8,62.5c-42.6,0-77.1,38.6-77.1,86.3l1-103.9c0-7.9,1.3-15.5,3.6-22.7,21.2-14.1,46.3-22.3,73.2-22.3Z"/>
+      <path d="M65.9,114.7c-2.3,7.2-3.6,14.8-3.6,22.7l-1,103.9H.2c0-53.5,26.3-100.3,65.7-126.6Z"/>
+    </g>
+    <polygon points="202.8 .4 202.8 92.9 226.2 92.9 226.2 56 259.8 56 259.8 36.1 226.2 36.1 226.2 19.4 265.7 19.4 265.7 0 202.8 .4"/>
+    <polygon points="282.3 -.3 282.3 93 346.1 93 346.1 72.4 306.8 72.4 306.8 55.6 341.7 55.6 341.7 36.4 306.5 36.4 306.5 19.6 346.2 19.6 346.2 -.3 282.3 -.3"/>
+    <polygon points="365.9 92.8 429.5 92.8 429.5 70.9 389.6 70.9 389.6 .2 365 .2 365.9 92.8"/>
+    <polygon points="448 0 471.9 0 471.9 92.5 447.5 92.5 448 0"/>
+    <path d="M485.1,92.5s34.7-44.3,33.4-46.5S485.7,0,485.7,0h29l18.4,24.8L550.1,0h26.6l-29.9,45.4,33.1,46.8h-28.8l-19.3-27.4-18.9,28.1-27.9-.4Z"/>
+    <g>
+      <path d="M210.9,154.1c-1.9,0-3.7-.2-5.3-.7-1.6-.4-3-1-4.2-1.6v-3.9c1.1.6,2.4,1.1,3.9,1.6,1.5.5,3.2.7,5.1.7,3.1,0,5.5-.6,7.2-1.7,1.7-1.2,2.5-2.8,2.5-5s-.8-3.9-2.5-5c-1.7-1.2-4.2-1.7-7.4-1.7h-3.9v-3.7h4c2.6,0,4.5-.5,5.9-1.5,1.4-1,2-2.4,2-4.2s-.3-2.3-1-3.1c-.6-.8-1.6-1.5-2.8-1.9-1.3-.4-2.8-.7-4.6-.7s-3,.2-4.3.6c-1.3.4-2.4.8-3.3,1.3v-3.9c1.1-.5,2.3-.9,3.6-1.3,1.3-.4,2.8-.5,4.5-.5s4,.3,5.5.8c1.5.5,2.7,1.3,3.6,2.2.9.9,1.6,1.9,2,3.1.4,1.1.6,2.3.6,3.4s-.2,2.4-.7,3.3c-.5.9-1,1.7-1.6,2.2-.6.6-1.4,1.1-2.3,1.6,1.3.7,2.3,1.4,3.2,2.1s1.6,1.7,2.2,2.8c.6,1.1,1,2.5,1,4.2s-.2,2.5-.7,3.8c-.5,1.2-1.2,2.4-2.2,3.4s-2.4,1.8-4,2.4c-1.7.6-3.7.9-6.1.9Z"/>
+      <path d="M232.1,153.7v-35.4h11.1c5.5,0,9.7,1.5,12.4,4.4,2.8,3,4.2,7.4,4.2,13.2s-1.4,10.3-4.2,13.2c-2.8,3-6.9,4.5-12.4,4.5h-11.1ZM235.9,150h7c4.5,0,7.8-1.1,9.9-3.4,2-2.3,3.1-5.8,3.1-10.7s-1-8.4-3.1-10.7c-2-2.3-5.3-3.4-9.9-3.4h-7v28.2Z"/>
+      <path d="M291.9,154.4c-.8,0-1.7-.1-2.6-.3-1-.2-1.9-.5-2.8-.8-.9-.3-1.7-.7-2.4-1l1.3-1.3v14.2h-3.8v-33.2c0-1.1.3-2,1-2.7.7-.7,1.6-1.2,2.7-1.6,1.1-.4,2.3-.6,3.5-.8,1.2-.2,2.4-.2,3.5-.2,2.1,0,4.1.4,6,1.3,1.9.9,3.4,2.4,4.6,4.5s1.7,5,1.7,8.6-.5,5.1-1.5,7.1c-1,2-2.4,3.5-4.3,4.6-1.9,1.1-4.2,1.6-6.9,1.6ZM291.9,150.9c1.9,0,3.5-.4,4.8-1.2,1.3-.8,2.2-2,2.8-3.5.6-1.5,1-3.2,1-5.1s-.2-3.7-.6-5.4c-.4-1.7-1.2-3-2.4-4-1.2-1-3-1.5-5.2-1.5s-3.4.2-4.8.6c-1.4.4-2,1-2,1.8v16.4c1.1.6,2.2,1.1,3.3,1.4s2.2.5,3.3.5Z"/>
+      <path d="M311.1,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1c-.8,0-1.6.2-2.4.3-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
+      <path d="M330.5,122.5v-4.2h4.2v4.2h-4.2ZM330.8,153.7v-26.4h3.8v26.4h-3.8Z"/>
+      <path d="M342.7,129.3c.8-.4,1.7-.8,2.6-1.1.9-.3,1.8-.6,2.8-.8.9-.2,1.9-.4,2.9-.5,1-.1,2-.2,2.9-.2,2.6,0,4.6.4,6.1,1.1,1.5.8,2.6,1.9,3.3,3.3.7,1.4,1,3.2,1,5.2v17.2h-3.8v-17.2c0-.6,0-1.3-.2-2-.2-.7-.5-1.4-.9-2-.5-.7-1.2-1.2-2.1-1.6s-2.2-.6-3.8-.6-2.2,0-3.4.3-2.4.4-3.6.8v22.4h-3.8v-24.3Z"/>
+      <path d="M380.7,154.1c-1.9,0-3.4-.6-4.7-1.7-1.3-1.1-1.9-2.9-1.9-5.1v-16.5h-4.6v-3.5h4.6v-7.5h3.8v7.5h6.8v3.5h-6.8v15.3c0,1.5.2,2.6.7,3.3s1.4,1.1,2.8,1.1,1.3,0,1.9-.2,1.1-.3,1.5-.5v3.6c-.5.2-1.1.3-1.9.5s-1.5.2-2.1.2Z"/>
+      <path d="M402,154.4c-2.5,0-4.7-.5-6.5-1.6-1.8-1-3.3-2.6-4.2-4.7-1-2.1-1.5-4.7-1.5-7.8,0-4.6,1-8,3.1-10.3,2.1-2.3,4.9-3.4,8.5-3.4s5.1.6,6.8,1.9c1.7,1.3,2.9,3,3.7,5.1.7,2.2,1.1,4.6,1.1,7.3h-21.3l.3-3.5h18.5l-1.5.5c-.1-2.6-.8-4.6-2-5.9-1.2-1.3-3.1-2-5.6-2s-3.2.3-4.3,1c-1.1.6-2,1.7-2.6,3.3s-.8,3.8-.8,6.6.8,5.7,2.3,7.3c1.5,1.7,3.6,2.5,6.3,2.5s2.5,0,3.6-.3,2.1-.5,3-.8c.9-.4,1.7-.7,2.4-1.2v3.9c-1.3.6-2.7,1.1-4.2,1.4-1.5.3-3.2.5-5.1.5Z"/>
+      <path d="M419.5,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1-1.6.2-2.4.3c-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
+      <path d="M446.4,154.4c-1.9,0-3.5-.2-4.8-.6s-2.6-.9-4-1.6v-4c1.1.6,2.1,1.1,2.9,1.5s1.7.7,2.6.9c.9.2,1.9.3,3,.3,1.8,0,3.2-.4,4.3-1.2,1.1-.8,1.7-1.8,1.7-3s-.3-1.7-.8-2.3-1.2-1-2.1-1.3c-.8-.4-1.7-.7-2.7-1.1-1-.3-2.1-.6-3.1-.9-1-.3-2-.8-2.9-1.3-.9-.5-1.6-1.3-2.1-2.1-.5-.9-.8-2-.8-3.4s.3-2.5.8-3.4c.5-1,1.3-1.7,2.1-2.4.9-.6,1.9-1.1,3-1.4,1.1-.3,2.2-.4,3.3-.4,1.6,0,2.9.2,4.1.6,1.1.4,2.3.9,3.5,1.4v3.8c-1.3-.7-2.5-1.3-3.6-1.7-1.1-.4-2.3-.7-3.8-.7s-2.7.3-3.9.9c-1.1.6-1.7,1.5-1.7,2.7s.3,1.8.9,2.4,1.4,1,2.3,1.4c1,.3,2,.7,3.1,1,.9.3,1.8.6,2.8.9,1,.3,1.8.8,2.7,1.3.8.5,1.5,1.3,2,2.1.5.9.8,2,.8,3.4s-.5,3.4-1.4,4.6-2.2,2.1-3.6,2.7c-1.5.6-3,.8-4.5.8Z"/>
+    </g>
+  </g>
+</svg>
@@ -0,0 +1,28 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<svg id="a" xmlns="http://www.w3.org/2000/svg" width="180.62mm" height="180.62mm" viewBox="0 0 250 195" xmlns:c2pa="http://c2pa.org/manifest">
+  <rect x="0" y="0" width="250" height="195" fill="none"/>
+  <g fill="#ffffff" transform="translate(2,169) scale(0.1)">
+    <g>
+      <path d="M139.4.8l-.2,62c-34.3,0-63.4,21.8-73.2,51.9C26.4,141,.2,187.8.2,241.3H0l.2-101.3C.2,63.1,62.4.8,139.4.8Z"/>
+      <path d="M139.1,92.5l-.8,62.5c-42.6,0-77.1,38.6-77.1,86.3l1-103.9c0-7.9,1.3-15.5,3.6-22.7,21.2-14.1,46.3-22.3,73.2-22.3Z"/>
+      <path d="M65.9,114.7c-2.3,7.2-3.6,14.8-3.6,22.7l-1,103.9H.2c0-53.5,26.3-100.3,65.7-126.6Z"/>
+    </g>
+    <polygon points="202.8 .4 202.8 92.9 226.2 92.9 226.2 56 259.8 56 259.8 36.1 226.2 36.1 226.2 19.4 265.7 19.4 265.7 0 202.8 .4"/>
+    <polygon points="282.3 -.3 282.3 93 346.1 93 346.1 72.4 306.8 72.4 306.8 55.6 341.7 55.6 341.7 36.4 306.5 36.4 306.5 19.6 346.2 19.6 346.2 -.3 282.3 -.3"/>
+    <polygon points="365.9 92.8 429.5 92.8 429.5 70.9 389.6 70.9 389.6 .2 365 .2 365.9 92.8"/>
+    <polygon points="448 0 471.9 0 471.9 92.5 447.5 92.5 448 0"/>
+    <path d="M485.1,92.5s34.7-44.3,33.4-46.5S485.7,0,485.7,0h29l18.4,24.8L550.1,0h26.6l-29.9,45.4,33.1,46.8h-28.8l-19.3-27.4-18.9,28.1-27.9-.4Z"/>
+    <g>
+      <path d="M210.9,154.1c-1.9,0-3.7-.2-5.3-.7-1.6-.4-3-1-4.2-1.6v-3.9c1.1.6,2.4,1.1,3.9,1.6,1.5.5,3.2.7,5.1.7,3.1,0,5.5-.6,7.2-1.7,1.7-1.2,2.5-2.8,2.5-5s-.8-3.9-2.5-5c-1.7-1.2-4.2-1.7-7.4-1.7h-3.9v-3.7h4c2.6,0,4.5-.5,5.9-1.5,1.4-1,2-2.4,2-4.2s-.3-2.3-1-3.1c-.6-.8-1.6-1.5-2.8-1.9-1.3-.4-2.8-.7-4.6-.7s-3,.2-4.3.6c-1.3.4-2.4.8-3.3,1.3v-3.9c1.1-.5,2.3-.9,3.6-1.3,1.3-.4,2.8-.5,4.5-.5s4,.3,5.5.8c1.5.5,2.7,1.3,3.6,2.2.9.9,1.6,1.9,2,3.1.4,1.1.6,2.3.6,3.4s-.2,2.4-.7,3.3c-.5.9-1,1.7-1.6,2.2-.6.6-1.4,1.1-2.3,1.6,1.3.7,2.3,1.4,3.2,2.1s1.6,1.7,2.2,2.8c.6,1.1,1,2.5,1,4.2s-.2,2.5-.7,3.8c-.5,1.2-1.2,2.4-2.2,3.4s-2.4,1.8-4,2.4c-1.7.6-3.7.9-6.1.9Z"/>
+      <path d="M232.1,153.7v-35.4h11.1c5.5,0,9.7,1.5,12.4,4.4,2.8,3,4.2,7.4,4.2,13.2s-1.4,10.3-4.2,13.2c-2.8,3-6.9,4.5-12.4,4.5h-11.1ZM235.9,150h7c4.5,0,7.8-1.1,9.9-3.4,2-2.3,3.1-5.8,3.1-10.7s-1-8.4-3.1-10.7c-2-2.3-5.3-3.4-9.9-3.4h-7v28.2Z"/>
+      <path d="M291.9,154.4c-.8,0-1.7-.1-2.6-.3-1-.2-1.9-.5-2.8-.8-.9-.3-1.7-.7-2.4-1l1.3-1.3v14.2h-3.8v-33.2c0-1.1.3-2,1-2.7.7-.7,1.6-1.2,2.7-1.6,1.1-.4,2.3-.6,3.5-.8,1.2-.2,2.4-.2,3.5-.2,2.1,0,4.1.4,6,1.3,1.9.9,3.4,2.4,4.6,4.5s1.7,5,1.7,8.6-.5,5.1-1.5,7.1c-1,2-2.4,3.5-4.3,4.6-1.9,1.1-4.2,1.6-6.9,1.6ZM291.9,150.9c1.9,0,3.5-.4,4.8-1.2,1.3-.8,2.2-2,2.8-3.5.6-1.5,1-3.2,1-5.1s-.2-3.7-.6-5.4c-.4-1.7-1.2-3-2.4-4-1.2-1-3-1.5-5.2-1.5s-3.4.2-4.8.6c-1.4.4-2,1-2,1.8v16.4c1.1.6,2.2,1.1,3.3,1.4s2.2.5,3.3.5Z"/>
+      <path d="M311.1,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1c-.8,0-1.6.2-2.4.3-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
+      <path d="M330.5,122.5v-4.2h4.2v4.2h-4.2ZM330.8,153.7v-26.4h3.8v26.4h-3.8Z"/>
+      <path d="M342.7,129.3c.8-.4,1.7-.8,2.6-1.1.9-.3,1.8-.6,2.8-.8.9-.2,1.9-.4,2.9-.5,1-.1,2-.2,2.9-.2,2.6,0,4.6.4,6.1,1.1,1.5.8,2.6,1.9,3.3,3.3.7,1.4,1,3.2,1,5.2v17.2h-3.8v-17.2c0-.6,0-1.3-.2-2-.2-.7-.5-1.4-.9-2-.5-.7-1.2-1.2-2.1-1.6s-2.2-.6-3.8-.6-2.2,0-3.4.3-2.4.4-3.6.8v22.4h-3.8v-24.3Z"/>
+      <path d="M380.7,154.1c-1.9,0-3.4-.6-4.7-1.7-1.3-1.1-1.9-2.9-1.9-5.1v-16.5h-4.6v-3.5h4.6v-7.5h3.8v7.5h6.8v3.5h-6.8v15.3c0,1.5.2,2.6.7,3.3s1.4,1.1,2.8,1.1,1.3,0,1.9-.2,1.1-.3,1.5-.5v3.6c-.5.2-1.1.3-1.9.5s-1.5.2-2.1.2Z"/>
+      <path d="M402,154.4c-2.5,0-4.7-.5-6.5-1.6-1.8-1-3.3-2.6-4.2-4.7-1-2.1-1.5-4.7-1.5-7.8,0-4.6,1-8,3.1-10.3,2.1-2.3,4.9-3.4,8.5-3.4s5.1.6,6.8,1.9c1.7,1.3,2.9,3,3.7,5.1.7,2.2,1.1,4.6,1.1,7.3h-21.3l.3-3.5h18.5l-1.5.5c-.1-2.6-.8-4.6-2-5.9-1.2-1.3-3.1-2-5.6-2s-3.2.3-4.3,1c-1.1.6-2,1.7-2.6,3.3s-.8,3.8-.8,6.6.8,5.7,2.3,7.3c1.5,1.7,3.6,2.5,6.3,2.5s2.5,0,3.6-.3,2.1-.5,3-.8c.9-.4,1.7-.7,2.4-1.2v3.9c-1.3.6-2.7,1.1-4.2,1.4-1.5.3-3.2.5-5.1.5Z"/>
+      <path d="M419.5,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1-1.6.2-2.4.3c-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
+      <path d="M446.4,154.4c-1.9,0-3.5-.2-4.8-.6s-2.6-.9-4-1.6v-4c1.1.6,2.1,1.1,2.9,1.5s1.7.7,2.6.9c.9.2,1.9.3,3,.3,1.8,0,3.2-.4,4.3-1.2,1.1-.8,1.7-1.8,1.7-3s-.3-1.7-.8-2.3-1.2-1-2.1-1.3c-.8-.4-1.7-.7-2.7-1.1-1-.3-2.1-.6-3.1-.9-1-.3-2-.8-2.9-1.3-.9-.5-1.6-1.3-2.1-2.1-.5-.9-.8-2-.8-3.4s.3-2.5.8-3.4c.5-1,1.3-1.7,2.1-2.4.9-.6,1.9-1.1,3-1.4,1.1-.3,2.2-.4,3.3-.4,1.6,0,2.9.2,4.1.6,1.1.4,2.3.9,3.5,1.4v3.8c-1.3-.7-2.5-1.3-3.6-1.7-1.1-.4-2.3-.7-3.8-.7s-2.7.3-3.9.9c-1.1.6-1.7,1.5-1.7,2.7s.3,1.8.9,2.4,1.4,1,2.3,1.4c1,.3,2,.7,3.1,1,.9.3,1.8.6,2.8.9,1,.3,1.8.8,2.7,1.3.8.5,1.5,1.3,2,2.1.5.9.8,2,.8,3.4s-.5,3.4-1.4,4.6-2.2,2.1-3.6,2.7c-1.5.6-3,.8-4.5.8Z"/>
+    </g>
+  </g>
+</svg>
@@ -0,0 +1,28 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<svg id="a" xmlns="http://www.w3.org/2000/svg" width="180.62mm" height="180.62mm" viewBox="0 0 300 400" xmlns:c2pa="http://c2pa.org/manifest">
+  <rect x="0" y="0" width="300" height="400" fill="none"/>
+  <g fill="#ffffff" transform="translate(3,365) scale(0.13)">
+    <g>
+      <path d="M139.4.8l-.2,62c-34.3,0-63.4,21.8-73.2,51.9C26.4,141,.2,187.8.2,241.3H0l.2-101.3C.2,63.1,62.4.8,139.4.8Z"/>
+      <path d="M139.1,92.5l-.8,62.5c-42.6,0-77.1,38.6-77.1,86.3l1-103.9c0-7.9,1.3-15.5,3.6-22.7,21.2-14.1,46.3-22.3,73.2-22.3Z"/>
+      <path d="M65.9,114.7c-2.3,7.2-3.6,14.8-3.6,22.7l-1,103.9H.2c0-53.5,26.3-100.3,65.7-126.6Z"/>
+    </g>
+    <polygon points="202.8 .4 202.8 92.9 226.2 92.9 226.2 56 259.8 56 259.8 36.1 226.2 36.1 226.2 19.4 265.7 19.4 265.7 0 202.8 .4"/>
+    <polygon points="282.3 -.3 282.3 93 346.1 93 346.1 72.4 306.8 72.4 306.8 55.6 341.7 55.6 341.7 36.4 306.5 36.4 306.5 19.6 346.2 19.6 346.2 -.3 282.3 -.3"/>
+    <polygon points="365.9 92.8 429.5 92.8 429.5 70.9 389.6 70.9 389.6 .2 365 .2 365.9 92.8"/>
+    <polygon points="448 0 471.9 0 471.9 92.5 447.5 92.5 448 0"/>
+    <path d="M485.1,92.5s34.7-44.3,33.4-46.5S485.7,0,485.7,0h29l18.4,24.8L550.1,0h26.6l-29.9,45.4,33.1,46.8h-28.8l-19.3-27.4-18.9,28.1-27.9-.4Z"/>
+    <g>
+      <path d="M210.9,154.1c-1.9,0-3.7-.2-5.3-.7-1.6-.4-3-1-4.2-1.6v-3.9c1.1.6,2.4,1.1,3.9,1.6,1.5.5,3.2.7,5.1.7,3.1,0,5.5-.6,7.2-1.7,1.7-1.2,2.5-2.8,2.5-5s-.8-3.9-2.5-5c-1.7-1.2-4.2-1.7-7.4-1.7h-3.9v-3.7h4c2.6,0,4.5-.5,5.9-1.5,1.4-1,2-2.4,2-4.2s-.3-2.3-1-3.1c-.6-.8-1.6-1.5-2.8-1.9-1.3-.4-2.8-.7-4.6-.7s-3,.2-4.3.6c-1.3.4-2.4.8-3.3,1.3v-3.9c1.1-.5,2.3-.9,3.6-1.3,1.3-.4,2.8-.5,4.5-.5s4,.3,5.5.8c1.5.5,2.7,1.3,3.6,2.2.9.9,1.6,1.9,2,3.1.4,1.1.6,2.3.6,3.4s-.2,2.4-.7,3.3c-.5.9-1,1.7-1.6,2.2-.6.6-1.4,1.1-2.3,1.6,1.3.7,2.3,1.4,3.2,2.1s1.6,1.7,2.2,2.8c.6,1.1,1,2.5,1,4.2s-.2,2.5-.7,3.8c-.5,1.2-1.2,2.4-2.2,3.4s-2.4,1.8-4,2.4c-1.7.6-3.7.9-6.1.9Z"/>
+      <path d="M232.1,153.7v-35.4h11.1c5.5,0,9.7,1.5,12.4,4.4,2.8,3,4.2,7.4,4.2,13.2s-1.4,10.3-4.2,13.2c-2.8,3-6.9,4.5-12.4,4.5h-11.1ZM235.9,150h7c4.5,0,7.8-1.1,9.9-3.4,2-2.3,3.1-5.8,3.1-10.7s-1-8.4-3.1-10.7c-2-2.3-5.3-3.4-9.9-3.4h-7v28.2Z"/>
+      <path d="M291.9,154.4c-.8,0-1.7-.1-2.6-.3-1-.2-1.9-.5-2.8-.8-.9-.3-1.7-.7-2.4-1l1.3-1.3v14.2h-3.8v-33.2c0-1.1.3-2,1-2.7.7-.7,1.6-1.2,2.7-1.6,1.1-.4,2.3-.6,3.5-.8,1.2-.2,2.4-.2,3.5-.2,2.1,0,4.1.4,6,1.3,1.9.9,3.4,2.4,4.6,4.5s1.7,5,1.7,8.6-.5,5.1-1.5,7.1c-1,2-2.4,3.5-4.3,4.6-1.9,1.1-4.2,1.6-6.9,1.6ZM291.9,150.9c1.9,0,3.5-.4,4.8-1.2,1.3-.8,2.2-2,2.8-3.5.6-1.5,1-3.2,1-5.1s-.2-3.7-.6-5.4c-.4-1.7-1.2-3-2.4-4-1.2-1-3-1.5-5.2-1.5s-3.4.2-4.8.6c-1.4.4-2,1-2,1.8v16.4c1.1.6,2.2,1.1,3.3,1.4s2.2.5,3.3.5Z"/>
+      <path d="M311.1,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1c-.8,0-1.6.2-2.4.3-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
+      <path d="M330.5,122.5v-4.2h4.2v4.2h-4.2ZM330.8,153.7v-26.4h3.8v26.4h-3.8Z"/>
+      <path d="M342.7,129.3c.8-.4,1.7-.8,2.6-1.1.9-.3,1.8-.6,2.8-.8.9-.2,1.9-.4,2.9-.5,1-.1,2-.2,2.9-.2,2.6,0,4.6.4,6.1,1.1,1.5.8,2.6,1.9,3.3,3.3.7,1.4,1,3.2,1,5.2v17.2h-3.8v-17.2c0-.6,0-1.3-.2-2-.2-.7-.5-1.4-.9-2-.5-.7-1.2-1.2-2.1-1.6s-2.2-.6-3.8-.6-2.2,0-3.4.3-2.4.4-3.6.8v22.4h-3.8v-24.3Z"/>
+      <path d="M380.7,154.1c-1.9,0-3.4-.6-4.7-1.7-1.3-1.1-1.9-2.9-1.9-5.1v-16.5h-4.6v-3.5h4.6v-7.5h3.8v7.5h6.8v3.5h-6.8v15.3c0,1.5.2,2.6.7,3.3s1.4,1.1,2.8,1.1,1.3,0,1.9-.2,1.1-.3,1.5-.5v3.6c-.5.2-1.1.3-1.9.5s-1.5.2-2.1.2Z"/>
+      <path d="M402,154.4c-2.5,0-4.7-.5-6.5-1.6-1.8-1-3.3-2.6-4.2-4.7-1-2.1-1.5-4.7-1.5-7.8,0-4.6,1-8,3.1-10.3,2.1-2.3,4.9-3.4,8.5-3.4s5.1.6,6.8,1.9c1.7,1.3,2.9,3,3.7,5.1.7,2.2,1.1,4.6,1.1,7.3h-21.3l.3-3.5h18.5l-1.5.5c-.1-2.6-.8-4.6-2-5.9-1.2-1.3-3.1-2-5.6-2s-3.2.3-4.3,1c-1.1.6-2,1.7-2.6,3.3s-.8,3.8-.8,6.6.8,5.7,2.3,7.3c1.5,1.7,3.6,2.5,6.3,2.5s2.5,0,3.6-.3,2.1-.5,3-.8c.9-.4,1.7-.7,2.4-1.2v3.9c-1.3.6-2.7,1.1-4.2,1.4-1.5.3-3.2.5-5.1.5Z"/>
+      <path d="M419.5,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1-1.6.2-2.4.3c-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
+      <path d="M446.4,154.4c-1.9,0-3.5-.2-4.8-.6s-2.6-.9-4-1.6v-4c1.1.6,2.1,1.1,2.9,1.5s1.7.7,2.6.9c.9.2,1.9.3,3,.3,1.8,0,3.2-.4,4.3-1.2,1.1-.8,1.7-1.8,1.7-3s-.3-1.7-.8-2.3-1.2-1-2.1-1.3c-.8-.4-1.7-.7-2.7-1.1-1-.3-2.1-.6-3.1-.9-1-.3-2-.8-2.9-1.3-.9-.5-1.6-1.3-2.1-2.1-.5-.9-.8-2-.8-3.4s.3-2.5.8-3.4c.5-1,1.3-1.7,2.1-2.4.9-.6,1.9-1.1,3-1.4,1.1-.3,2.2-.4,3.3-.4,1.6,0,2.9.2,4.1.6,1.1.4,2.3.9,3.5,1.4v3.8c-1.3-.7-2.5-1.3-3.6-1.7-1.1-.4-2.3-.7-3.8-.7s-2.7.3-3.9.9c-1.1.6-1.7,1.5-1.7,2.7s.3,1.8.9,2.4,1.4,1,2.3,1.4c1,.3,2,.7,3.1,1,.9.3,1.8.6,2.8.9,1,.3,1.8.8,2.7,1.3.8.5,1.5,1.3,2,2.1.5.9.8,2,.8,3.4s-.5,3.4-1.4,4.6-2.2,2.1-3.6,2.7c-1.5.6-3,.8-4.5.8Z"/>
+    </g>
+  </g>
+</svg>
@@ -0,0 +1,28 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<svg id="a" xmlns="http://www.w3.org/2000/svg" width="180.62mm" height="180.62mm" viewBox="0 0 235 244" xmlns:c2pa="http://c2pa.org/manifest">
+  <rect x="0" y="0" width="235" height="244" fill="none"/>
+  <g fill="#ffffff" transform="translate(2,215) scale(0.1)">
+    <g>
+      <path d="M139.4.8l-.2,62c-34.3,0-63.4,21.8-73.2,51.9C26.4,141,.2,187.8.2,241.3H0l.2-101.3C.2,63.1,62.4.8,139.4.8Z"/>
+      <path d="M139.1,92.5l-.8,62.5c-42.6,0-77.1,38.6-77.1,86.3l1-103.9c0-7.9,1.3-15.5,3.6-22.7,21.2-14.1,46.3-22.3,73.2-22.3Z"/>
+      <path d="M65.9,114.7c-2.3,7.2-3.6,14.8-3.6,22.7l-1,103.9H.2c0-53.5,26.3-100.3,65.7-126.6Z"/>
+    </g>
+    <polygon points="202.8 .4 202.8 92.9 226.2 92.9 226.2 56 259.8 56 259.8 36.1 226.2 36.1 226.2 19.4 265.7 19.4 265.7 0 202.8 .4"/>
+    <polygon points="282.3 -.3 282.3 93 346.1 93 346.1 72.4 306.8 72.4 306.8 55.6 341.7 55.6 341.7 36.4 306.5 36.4 306.5 19.6 346.2 19.6 346.2 -.3 282.3 -.3"/>
+    <polygon points="365.9 92.8 429.5 92.8 429.5 70.9 389.6 70.9 389.6 .2 365 .2 365.9 92.8"/>
+    <polygon points="448 0 471.9 0 471.9 92.5 447.5 92.5 448 0"/>
+    <path d="M485.1,92.5s34.7-44.3,33.4-46.5S485.7,0,485.7,0h29l18.4,24.8L550.1,0h26.6l-29.9,45.4,33.1,46.8h-28.8l-19.3-27.4-18.9,28.1-27.9-.4Z"/>
+    <g>
+      <path d="M210.9,154.1c-1.9,0-3.7-.2-5.3-.7-1.6-.4-3-1-4.2-1.6v-3.9c1.1.6,2.4,1.1,3.9,1.6,1.5.5,3.2.7,5.1.7,3.1,0,5.5-.6,7.2-1.7,1.7-1.2,2.5-2.8,2.5-5s-.8-3.9-2.5-5c-1.7-1.2-4.2-1.7-7.4-1.7h-3.9v-3.7h4c2.6,0,4.5-.5,5.9-1.5,1.4-1,2-2.4,2-4.2s-.3-2.3-1-3.1c-.6-.8-1.6-1.5-2.8-1.9-1.3-.4-2.8-.7-4.6-.7s-3,.2-4.3.6c-1.3.4-2.4.8-3.3,1.3v-3.9c1.1-.5,2.3-.9,3.6-1.3,1.3-.4,2.8-.5,4.5-.5s4,.3,5.5.8c1.5.5,2.7,1.3,3.6,2.2.9.9,1.6,1.9,2,3.1.4,1.1.6,2.3.6,3.4s-.2,2.4-.7,3.3c-.5.9-1,1.7-1.6,2.2-.6.6-1.4,1.1-2.3,1.6,1.3.7,2.3,1.4,3.2,2.1s1.6,1.7,2.2,2.8c.6,1.1,1,2.5,1,4.2s-.2,2.5-.7,3.8c-.5,1.2-1.2,2.4-2.2,3.4s-2.4,1.8-4,2.4c-1.7.6-3.7.9-6.1.9Z"/>
+      <path d="M232.1,153.7v-35.4h11.1c5.5,0,9.7,1.5,12.4,4.4,2.8,3,4.2,7.4,4.2,13.2s-1.4,10.3-4.2,13.2c-2.8,3-6.9,4.5-12.4,4.5h-11.1ZM235.9,150h7c4.5,0,7.8-1.1,9.9-3.4,2-2.3,3.1-5.8,3.1-10.7s-1-8.4-3.1-10.7c-2-2.3-5.3-3.4-9.9-3.4h-7v28.2Z"/>
+      <path d="M291.9,154.4c-.8,0-1.7-.1-2.6-.3-1-.2-1.9-.5-2.8-.8-.9-.3-1.7-.7-2.4-1l1.3-1.3v14.2h-3.8v-33.2c0-1.1.3-2,1-2.7.7-.7,1.6-1.2,2.7-1.6,1.1-.4,2.3-.6,3.5-.8,1.2-.2,2.4-.2,3.5-.2,2.1,0,4.1.4,6,1.3,1.9.9,3.4,2.4,4.6,4.5s1.7,5,1.7,8.6-.5,5.1-1.5,7.1c-1,2-2.4,3.5-4.3,4.6-1.9,1.1-4.2,1.6-6.9,1.6ZM291.9,150.9c1.9,0,3.5-.4,4.8-1.2,1.3-.8,2.2-2,2.8-3.5.6-1.5,1-3.2,1-5.1s-.2-3.7-.6-5.4c-.4-1.7-1.2-3-2.4-4-1.2-1-3-1.5-5.2-1.5s-3.4.2-4.8.6c-1.4.4-2,1-2,1.8v16.4c1.1.6,2.2,1.1,3.3,1.4s2.2.5,3.3.5Z"/>
+      <path d="M311.1,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1c-.8,0-1.6.2-2.4.3-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
+      <path d="M330.5,122.5v-4.2h4.2v4.2h-4.2ZM330.8,153.7v-26.4h3.8v26.4h-3.8Z"/>
+      <path d="M342.7,129.3c.8-.4,1.7-.8,2.6-1.1.9-.3,1.8-.6,2.8-.8.9-.2,1.9-.4,2.9-.5,1-.1,2-.2,2.9-.2,2.6,0,4.6.4,6.1,1.1,1.5.8,2.6,1.9,3.3,3.3.7,1.4,1,3.2,1,5.2v17.2h-3.8v-17.2c0-.6,0-1.3-.2-2-.2-.7-.5-1.4-.9-2-.5-.7-1.2-1.2-2.1-1.6s-2.2-.6-3.8-.6-2.2,0-3.4.3-2.4.4-3.6.8v22.4h-3.8v-24.3Z"/>
+      <path d="M380.7,154.1c-1.9,0-3.4-.6-4.7-1.7-1.3-1.1-1.9-2.9-1.9-5.1v-16.5h-4.6v-3.5h4.6v-7.5h3.8v7.5h6.8v3.5h-6.8v15.3c0,1.5.2,2.6.7,3.3s1.4,1.1,2.8,1.1,1.3,0,1.9-.2,1.1-.3,1.5-.5v3.6c-.5.2-1.1.3-1.9.5s-1.5.2-2.1.2Z"/>
+      <path d="M402,154.4c-2.5,0-4.7-.5-6.5-1.6-1.8-1-3.3-2.6-4.2-4.7-1-2.1-1.5-4.7-1.5-7.8,0-4.6,1-8,3.1-10.3,2.1-2.3,4.9-3.4,8.5-3.4s5.1.6,6.8,1.9c1.7,1.3,2.9,3,3.7,5.1.7,2.2,1.1,4.6,1.1,7.3h-21.3l.3-3.5h18.5l-1.5.5c-.1-2.6-.8-4.6-2-5.9-1.2-1.3-3.1-2-5.6-2s-3.2.3-4.3,1c-1.1.6-2,1.7-2.6,3.3s-.8,3.8-.8,6.6.8,5.7,2.3,7.3c1.5,1.7,3.6,2.5,6.3,2.5s2.5,0,3.6-.3,2.1-.5,3-.8c.9-.4,1.7-.7,2.4-1.2v3.9c-1.3.6-2.7,1.1-4.2,1.4-1.5.3-3.2.5-5.1.5Z"/>
+      <path d="M419.5,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1-1.6.2-2.4.3c-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
+      <path d="M446.4,154.4c-1.9,0-3.5-.2-4.8-.6s-2.6-.9-4-1.6v-4c1.1.6,2.1,1.1,2.9,1.5s1.7.7,2.6.9c.9.2,1.9.3,3,.3,1.8,0,3.2-.4,4.3-1.2,1.1-.8,1.7-1.8,1.7-3s-.3-1.7-.8-2.3-1.2-1-2.1-1.3c-.8-.4-1.7-.7-2.7-1.1-1-.3-2.1-.6-3.1-.9-1-.3-2-.8-2.9-1.3-.9-.5-1.6-1.3-2.1-2.1-.5-.9-.8-2-.8-3.4s.3-2.5.8-3.4c.5-1,1.3-1.7,2.1-2.4.9-.6,1.9-1.1,3-1.4,1.1-.3,2.2-.4,3.3-.4,1.6,0,2.9.2,4.1.6,1.1.4,2.3.9,3.5,1.4v3.8c-1.3-.7-2.5-1.3-3.6-1.7-1.1-.4-2.3-.7-3.8-.7s-2.7.3-3.9.9c-1.1.6-1.7,1.5-1.7,2.7s.3,1.8.9,2.4,1.4,1,2.3,1.4c1,.3,2,.7,3.1,1,.9.3,1.8.6,2.8.9,1,.3,1.8.8,2.7,1.3.8.5,1.5,1.3,2,2.1.5.9.8,2,.8,3.4s-.5,3.4-1.4,4.6-2.2,2.1-3.6,2.7c-1.5.6-3,.8-4.5.8Z"/>
+    </g>
+  </g>
+</svg>
@@ -0,0 +1,28 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<svg id="a" xmlns="http://www.w3.org/2000/svg" width="180.62mm" height="180.62mm" viewBox="0 0 600 400" xmlns:c2pa="http://c2pa.org/manifest">
+  <rect x="0" y="0" width="600" height="400" fill="none"/>
+  <g fill="#ffffff" transform="translate(4,357) scale(0.16)">
+    <g>
+      <path d="M139.4.8l-.2,62c-34.3,0-63.4,21.8-73.2,51.9C26.4,141,.2,187.8.2,241.3H0l.2-101.3C.2,63.1,62.4.8,139.4.8Z"/>
+      <path d="M139.1,92.5l-.8,62.5c-42.6,0-77.1,38.6-77.1,86.3l1-103.9c0-7.9,1.3-15.5,3.6-22.7,21.2-14.1,46.3-22.3,73.2-22.3Z"/>
+      <path d="M65.9,114.7c-2.3,7.2-3.6,14.8-3.6,22.7l-1,103.9H.2c0-53.5,26.3-100.3,65.7-126.6Z"/>
+    </g>
+    <polygon points="202.8 .4 202.8 92.9 226.2 92.9 226.2 56 259.8 56 259.8 36.1 226.2 36.1 226.2 19.4 265.7 19.4 265.7 0 202.8 .4"/>
+    <polygon points="282.3 -.3 282.3 93 346.1 93 346.1 72.4 306.8 72.4 306.8 55.6 341.7 55.6 341.7 36.4 306.5 36.4 306.5 19.6 346.2 19.6 346.2 -.3 282.3 -.3"/>
+    <polygon points="365.9 92.8 429.5 92.8 429.5 70.9 389.6 70.9 389.6 .2 365 .2 365.9 92.8"/>
+    <polygon points="448 0 471.9 0 471.9 92.5 447.5 92.5 448 0"/>
+    <path d="M485.1,92.5s34.7-44.3,33.4-46.5S485.7,0,485.7,0h29l18.4,24.8L550.1,0h26.6l-29.9,45.4,33.1,46.8h-28.8l-19.3-27.4-18.9,28.1-27.9-.4Z"/>
+    <g>
+      <path d="M210.9,154.1c-1.9,0-3.7-.2-5.3-.7-1.6-.4-3-1-4.2-1.6v-3.9c1.1.6,2.4,1.1,3.9,1.6,1.5.5,3.2.7,5.1.7,3.1,0,5.5-.6,7.2-1.7,1.7-1.2,2.5-2.8,2.5-5s-.8-3.9-2.5-5c-1.7-1.2-4.2-1.7-7.4-1.7h-3.9v-3.7h4c2.6,0,4.5-.5,5.9-1.5,1.4-1,2-2.4,2-4.2s-.3-2.3-1-3.1c-.6-.8-1.6-1.5-2.8-1.9-1.3-.4-2.8-.7-4.6-.7s-3,.2-4.3.6c-1.3.4-2.4.8-3.3,1.3v-3.9c1.1-.5,2.3-.9,3.6-1.3,1.3-.4,2.8-.5,4.5-.5s4,.3,5.5.8c1.5.5,2.7,1.3,3.6,2.2.9.9,1.6,1.9,2,3.1.4,1.1.6,2.3.6,3.4s-.2,2.4-.7,3.3c-.5.9-1,1.7-1.6,2.2-.6.6-1.4,1.1-2.3,1.6,1.3.7,2.3,1.4,3.2,2.1s1.6,1.7,2.2,2.8c.6,1.1,1,2.5,1,4.2s-.2,2.5-.7,3.8c-.5,1.2-1.2,2.4-2.2,3.4s-2.4,1.8-4,2.4c-1.7.6-3.7.9-6.1.9Z"/>
+      <path d="M232.1,153.7v-35.4h11.1c5.5,0,9.7,1.5,12.4,4.4,2.8,3,4.2,7.4,4.2,13.2s-1.4,10.3-4.2,13.2c-2.8,3-6.9,4.5-12.4,4.5h-11.1ZM235.9,150h7c4.5,0,7.8-1.1,9.9-3.4,2-2.3,3.1-5.8,3.1-10.7s-1-8.4-3.1-10.7c-2-2.3-5.3-3.4-9.9-3.4h-7v28.2Z"/>
+      <path d="M291.9,154.4c-.8,0-1.7-.1-2.6-.3-1-.2-1.9-.5-2.8-.8-.9-.3-1.7-.7-2.4-1l1.3-1.3v14.2h-3.8v-33.2c0-1.1.3-2,1-2.7.7-.7,1.6-1.2,2.7-1.6,1.1-.4,2.3-.6,3.5-.8,1.2-.2,2.4-.2,3.5-.2,2.1,0,4.1.4,6,1.3,1.9.9,3.4,2.4,4.6,4.5s1.7,5,1.7,8.6-.5,5.1-1.5,7.1c-1,2-2.4,3.5-4.3,4.6-1.9,1.1-4.2,1.6-6.9,1.6ZM291.9,150.9c1.9,0,3.5-.4,4.8-1.2,1.3-.8,2.2-2,2.8-3.5.6-1.5,1-3.2,1-5.1s-.2-3.7-.6-5.4c-.4-1.7-1.2-3-2.4-4-1.2-1-3-1.5-5.2-1.5s-3.4.2-4.8.6c-1.4.4-2,1-2,1.8v16.4c1.1.6,2.2,1.1,3.3,1.4s2.2.5,3.3.5Z"/>
+      <path d="M311.1,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1c-.8,0-1.6.2-2.4.3-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
+      <path d="M330.5,122.5v-4.2h4.2v4.2h-4.2ZM330.8,153.7v-26.4h3.8v26.4h-3.8Z"/>
+      <path d="M342.7,129.3c.8-.4,1.7-.8,2.6-1.1.9-.3,1.8-.6,2.8-.8.9-.2,1.9-.4,2.9-.5,1-.1,2-.2,2.9-.2,2.6,0,4.6.4,6.1,1.1,1.5.8,2.6,1.9,3.3,3.3.7,1.4,1,3.2,1,5.2v17.2h-3.8v-17.2c0-.6,0-1.3-.2-2-.2-.7-.5-1.4-.9-2-.5-.7-1.2-1.2-2.1-1.6s-2.2-.6-3.8-.6-2.2,0-3.4.3-2.4.4-3.6.8v22.4h-3.8v-24.3Z"/>
+      <path d="M380.7,154.1c-1.9,0-3.4-.6-4.7-1.7-1.3-1.1-1.9-2.9-1.9-5.1v-16.5h-4.6v-3.5h4.6v-7.5h3.8v7.5h6.8v3.5h-6.8v15.3c0,1.5.2,2.6.7,3.3s1.4,1.1,2.8,1.1,1.3,0,1.9-.2,1.1-.3,1.5-.5v3.6c-.5.2-1.1.3-1.9.5s-1.5.2-2.1.2Z"/>
+      <path d="M402,154.4c-2.5,0-4.7-.5-6.5-1.6-1.8-1-3.3-2.6-4.2-4.7-1-2.1-1.5-4.7-1.5-7.8,0-4.6,1-8,3.1-10.3,2.1-2.3,4.9-3.4,8.5-3.4s5.1.6,6.8,1.9c1.7,1.3,2.9,3,3.7,5.1.7,2.2,1.1,4.6,1.1,7.3h-21.3l.3-3.5h18.5l-1.5.5c-.1-2.6-.8-4.6-2-5.9-1.2-1.3-3.1-2-5.6-2s-3.2.3-4.3,1c-1.1.6-2,1.7-2.6,3.3s-.8,3.8-.8,6.6.8,5.7,2.3,7.3c1.5,1.7,3.6,2.5,6.3,2.5s2.5,0,3.6-.3,2.1-.5,3-.8c.9-.4,1.7-.7,2.4-1.2v3.9c-1.3.6-2.7,1.1-4.2,1.4-1.5.3-3.2.5-5.1.5Z"/>
+      <path d="M419.5,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1-1.6.2-2.4.3c-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
+      <path d="M446.4,154.4c-1.9,0-3.5-.2-4.8-.6s-2.6-.9-4-1.6v-4c1.1.6,2.1,1.1,2.9,1.5s1.7.7,2.6.9c.9.2,1.9.3,3,.3,1.8,0,3.2-.4,4.3-1.2,1.1-.8,1.7-1.8,1.7-3s-.3-1.7-.8-2.3-1.2-1-2.1-1.3c-.8-.4-1.7-.7-2.7-1.1-1-.3-2.1-.6-3.1-.9-1-.3-2-.8-2.9-1.3-.9-.5-1.6-1.3-2.1-2.1-.5-.9-.8-2-.8-3.4s.3-2.5.8-3.4c.5-1,1.3-1.7,2.1-2.4.9-.6,1.9-1.1,3-1.4,1.1-.3,2.2-.4,3.3-.4,1.6,0,2.9.2,4.1.6,1.1.4,2.3.9,3.5,1.4v3.8c-1.3-.7-2.5-1.3-3.6-1.7-1.1-.4-2.3-.7-3.8-.7s-2.7.3-3.9.9c-1.1.6-1.7,1.5-1.7,2.7s.3,1.8.9,2.4,1.4,1,2.3,1.4c1,.3,2,.7,3.1,1,.9.3,1.8.6,2.8.9,1,.3,1.8.8,2.7,1.3.8.5,1.5,1.3,2,2.1.5.9.8,2,.8,3.4s-.5,3.4-1.4,4.6-2.2,2.1-3.6,2.7c-1.5.6-3,.8-4.5.8Z"/>
+    </g>
+  </g>
+</svg>
@@ -0,0 +1,28 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<svg id="a" xmlns="http://www.w3.org/2000/svg" width="180.62mm" height="180.62mm" viewBox="0 0 205 255" xmlns:c2pa="http://c2pa.org/manifest">
+  <rect x="0" y="0" width="205" height="255" fill="none"/>
+  <g fill="#ffffff" transform="translate(3,228) scale(0.1)">
+    <g>
+      <path d="M139.4.8l-.2,62c-34.3,0-63.4,21.8-73.2,51.9C26.4,141,.2,187.8.2,241.3H0l.2-101.3C.2,63.1,62.4.8,139.4.8Z"/>
+      <path d="M139.1,92.5l-.8,62.5c-42.6,0-77.1,38.6-77.1,86.3l1-103.9c0-7.9,1.3-15.5,3.6-22.7,21.2-14.1,46.3-22.3,73.2-22.3Z"/>
+      <path d="M65.9,114.7c-2.3,7.2-3.6,14.8-3.6,22.7l-1,103.9H.2c0-53.5,26.3-100.3,65.7-126.6Z"/>
+    </g>
+    <polygon points="202.8 .4 202.8 92.9 226.2 92.9 226.2 56 259.8 56 259.8 36.1 226.2 36.1 226.2 19.4 265.7 19.4 265.7 0 202.8 .4"/>
+    <polygon points="282.3 -.3 282.3 93 346.1 93 346.1 72.4 306.8 72.4 306.8 55.6 341.7 55.6 341.7 36.4 306.5 36.4 306.5 19.6 346.2 19.6 346.2 -.3 282.3 -.3"/>
+    <polygon points="365.9 92.8 429.5 92.8 429.5 70.9 389.6 70.9 389.6 .2 365 .2 365.9 92.8"/>
+    <polygon points="448 0 471.9 0 471.9 92.5 447.5 92.5 448 0"/>
+    <path d="M485.1,92.5s34.7-44.3,33.4-46.5S485.7,0,485.7,0h29l18.4,24.8L550.1,0h26.6l-29.9,45.4,33.1,46.8h-28.8l-19.3-27.4-18.9,28.1-27.9-.4Z"/>
+    <g>
+      <path d="M210.9,154.1c-1.9,0-3.7-.2-5.3-.7-1.6-.4-3-1-4.2-1.6v-3.9c1.1.6,2.4,1.1,3.9,1.6,1.5.5,3.2.7,5.1.7,3.1,0,5.5-.6,7.2-1.7,1.7-1.2,2.5-2.8,2.5-5s-.8-3.9-2.5-5c-1.7-1.2-4.2-1.7-7.4-1.7h-3.9v-3.7h4c2.6,0,4.5-.5,5.9-1.5,1.4-1,2-2.4,2-4.2s-.3-2.3-1-3.1c-.6-.8-1.6-1.5-2.8-1.9-1.3-.4-2.8-.7-4.6-.7s-3,.2-4.3.6c-1.3.4-2.4.8-3.3,1.3v-3.9c1.1-.5,2.3-.9,3.6-1.3,1.3-.4,2.8-.5,4.5-.5s4,.3,5.5.8c1.5.5,2.7,1.3,3.6,2.2.9.9,1.6,1.9,2,3.1.4,1.1.6,2.3.6,3.4s-.2,2.4-.7,3.3c-.5.9-1,1.7-1.6,2.2-.6.6-1.4,1.1-2.3,1.6,1.3.7,2.3,1.4,3.2,2.1s1.6,1.7,2.2,2.8c.6,1.1,1,2.5,1,4.2s-.2,2.5-.7,3.8c-.5,1.2-1.2,2.4-2.2,3.4s-2.4,1.8-4,2.4c-1.7.6-3.7.9-6.1.9Z"/>
+      <path d="M232.1,153.7v-35.4h11.1c5.5,0,9.7,1.5,12.4,4.4,2.8,3,4.2,7.4,4.2,13.2s-1.4,10.3-4.2,13.2c-2.8,3-6.9,4.5-12.4,4.5h-11.1ZM235.9,150h7c4.5,0,7.8-1.1,9.9-3.4,2-2.3,3.1-5.8,3.1-10.7s-1-8.4-3.1-10.7c-2-2.3-5.3-3.4-9.9-3.4h-7v28.2Z"/>
+      <path d="M291.9,154.4c-.8,0-1.7-.1-2.6-.3-1-.2-1.9-.5-2.8-.8-.9-.3-1.7-.7-2.4-1l1.3-1.3v14.2h-3.8v-33.2c0-1.1.3-2,1-2.7.7-.7,1.6-1.2,2.7-1.6,1.1-.4,2.3-.6,3.5-.8,1.2-.2,2.4-.2,3.5-.2,2.1,0,4.1.4,6,1.3,1.9.9,3.4,2.4,4.6,4.5s1.7,5,1.7,8.6-.5,5.1-1.5,7.1c-1,2-2.4,3.5-4.3,4.6-1.9,1.1-4.2,1.6-6.9,1.6ZM291.9,150.9c1.9,0,3.5-.4,4.8-1.2,1.3-.8,2.2-2,2.8-3.5.6-1.5,1-3.2,1-5.1s-.2-3.7-.6-5.4c-.4-1.7-1.2-3-2.4-4-1.2-1-3-1.5-5.2-1.5s-3.4.2-4.8.6c-1.4.4-2,1-2,1.8v16.4c1.1.6,2.2,1.1,3.3,1.4s2.2.5,3.3.5Z"/>
+      <path d="M311.1,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1c-.8,0-1.6.2-2.4.3-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
+      <path d="M330.5,122.5v-4.2h4.2v4.2h-4.2ZM330.8,153.7v-26.4h3.8v26.4h-3.8Z"/>
+      <path d="M342.7,129.3c.8-.4,1.7-.8,2.6-1.1.9-.3,1.8-.6,2.8-.8.9-.2,1.9-.4,2.9-.5,1-.1,2-.2,2.9-.2,2.6,0,4.6.4,6.1,1.1,1.5.8,2.6,1.9,3.3,3.3.7,1.4,1,3.2,1,5.2v17.2h-3.8v-17.2c0-.6,0-1.3-.2-2-.2-.7-.5-1.4-.9-2-.5-.7-1.2-1.2-2.1-1.6s-2.2-.6-3.8-.6-2.2,0-3.4.3-2.4.4-3.6.8v22.4h-3.8v-24.3Z"/>
+      <path d="M380.7,154.1c-1.9,0-3.4-.6-4.7-1.7-1.3-1.1-1.9-2.9-1.9-5.1v-16.5h-4.6v-3.5h4.6v-7.5h3.8v7.5h6.8v3.5h-6.8v15.3c0,1.5.2,2.6.7,3.3s1.4,1.1,2.8,1.1,1.3,0,1.9-.2,1.1-.3,1.5-.5v3.6c-.5.2-1.1.3-1.9.5s-1.5.2-2.1.2Z"/>
+      <path d="M402,154.4c-2.5,0-4.7-.5-6.5-1.6-1.8-1-3.3-2.6-4.2-4.7-1-2.1-1.5-4.7-1.5-7.8,0-4.6,1-8,3.1-10.3,2.1-2.3,4.9-3.4,8.5-3.4s5.1.6,6.8,1.9c1.7,1.3,2.9,3,3.7,5.1.7,2.2,1.1,4.6,1.1,7.3h-21.3l.3-3.5h18.5l-1.5.5c-.1-2.6-.8-4.6-2-5.9-1.2-1.3-3.1-2-5.6-2s-3.2.3-4.3,1c-1.1.6-2,1.7-2.6,3.3s-.8,3.8-.8,6.6.8,5.7,2.3,7.3c1.5,1.7,3.6,2.5,6.3,2.5s2.5,0,3.6-.3,2.1-.5,3-.8c.9-.4,1.7-.7,2.4-1.2v3.9c-1.3.6-2.7,1.1-4.2,1.4-1.5.3-3.2.5-5.1.5Z"/>
+      <path d="M419.5,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1-1.6.2-2.4.3c-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
+      <path d="M446.4,154.4c-1.9,0-3.5-.2-4.8-.6s-2.6-.9-4-1.6v-4c1.1.6,2.1,1.1,2.9,1.5s1.7.7,2.6.9c.9.2,1.9.3,3,.3,1.8,0,3.2-.4,4.3-1.2,1.1-.8,1.7-1.8,1.7-3s-.3-1.7-.8-2.3-1.2-1-2.1-1.3c-.8-.4-1.7-.7-2.7-1.1-1-.3-2.1-.6-3.1-.9-1-.3-2-.8-2.9-1.3-.9-.5-1.6-1.3-2.1-2.1-.5-.9-.8-2-.8-3.4s.3-2.5.8-3.4c.5-1,1.3-1.7,2.1-2.4.9-.6,1.9-1.1,3-1.4,1.1-.3,2.2-.4,3.3-.4,1.6,0,2.9.2,4.1.6,1.1.4,2.3.9,3.5,1.4v3.8c-1.3-.7-2.5-1.3-3.6-1.7-1.1-.4-2.3-.7-3.8-.7s-2.7.3-3.9.9c-1.1.6-1.7,1.5-1.7,2.7s.3,1.8.9,2.4,1.4,1,2.3,1.4c1,.3,2,.7,3.1,1,.9.3,1.8.6,2.8.9,1,.3,1.8.8,2.7,1.3.8.5,1.5,1.3,2,2.1.5.9.8,2,.8,3.4s-.5,3.4-1.4,4.6-2.2,2.1-3.6,2.7c-1.5.6-3,.8-4.5.8Z"/>
+    </g>
+  </g>
+</svg>
@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Medium Plastic Syringe @0.50mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "IQnumbi0N4BnvMfO",
+	"filament_id": "OFAzgHcF",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 0.50mm nozzle",
+		"FELIX Food Double 0.50mm nozzle",
+		"FELIX Food Switch 0.50mm nozzle"
+	],
+	"filament_diameter": [
+		"31.22"
+	],
+	"filament_flow_ratio": [
+		"1.05"
+	],
+	"filament_retraction_length": [
+		"3.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"6.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"0.75"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"7.2"
+	]
+}
@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Medium Plastic Syringe @1.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "p8CG6dHMUxNl7iPL",
+	"filament_id": "OFAzgHcF",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 1.00mm nozzle",
+		"FELIX Food Double 1.00mm nozzle",
+		"FELIX Food Switch 1.00mm nozzle"
+	],
+	"filament_diameter": [
+		"31.22"
+	],
+	"filament_flow_ratio": [
+		"1.05"
+	],
+	"filament_retraction_length": [
+		"3.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"6.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"1.5"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"27.0"
+	]
+}
@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Medium Plastic Syringe @2.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "s5uPS7I3E57tiRRC",
+	"filament_id": "OFAzgHcF",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 2.00mm nozzle",
+		"FELIX Food Double 2.00mm nozzle",
+		"FELIX Food Switch 2.00mm nozzle"
+	],
+	"filament_diameter": [
+		"31.22"
+	],
+	"filament_flow_ratio": [
+		"1.05"
+	],
+	"filament_retraction_length": [
+		"3.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"6.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"3.0"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"108.0"
+	]
+}
@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Medium Plastic Syringe @3.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "zlZtghh6ytU7N09m",
+	"filament_id": "OFAzgHcF",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 3.00mm nozzle",
+		"FELIX Food Double 3.00mm nozzle",
+		"FELIX Food Switch 3.00mm nozzle"
+	],
+	"filament_diameter": [
+		"31.22"
+	],
+	"filament_flow_ratio": [
+		"1.05"
+	],
+	"filament_retraction_length": [
+		"3.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"6.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"4.5"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"216.0"
+	]
+}
@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Medium Plastic Syringe @4.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "fvTZEcREMbs3JW1D",
+	"filament_id": "OFAzgHcF",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 4.00mm nozzle",
+		"FELIX Food Double 4.00mm nozzle",
+		"FELIX Food Switch 4.00mm nozzle"
+	],
+	"filament_diameter": [
+		"31.22"
+	],
+	"filament_flow_ratio": [
+		"1.05"
+	],
+	"filament_retraction_length": [
+		"3.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"6.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"6.0"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"432.0"
+	]
+}
@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Medium Stainless Steel Syringe @0.50mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "2XyqnzMqyuRCqpPq",
+	"filament_id": "OFqZSD1S",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 0.50mm nozzle",
+		"FELIX Food Double 0.50mm nozzle",
+		"FELIX Food Switch 0.50mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.05"
+	],
+	"filament_retraction_length": [
+		"1.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"10.0"
+	],
+	"filament_deretraction_speed": [
+		"10.0"
+	],
+	"filament_retract_length_toolchange": [
+		"2.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"0.75"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"7.2"
+	]
+}
@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Medium Stainless Steel Syringe @1.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "yNxVUGOb1kUbXLiw",
+	"filament_id": "OFqZSD1S",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 1.00mm nozzle",
+		"FELIX Food Double 1.00mm nozzle",
+		"FELIX Food Switch 1.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.05"
+	],
+	"filament_retraction_length": [
+		"1.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"10.0"
+	],
+	"filament_deretraction_speed": [
+		"10.0"
+	],
+	"filament_retract_length_toolchange": [
+		"2.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"1.5"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"27.0"
+	]
+}
@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Medium Stainless Steel Syringe @2.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "4MhgYDnGFKLfurhc",
+	"filament_id": "OFqZSD1S",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 2.00mm nozzle",
+		"FELIX Food Double 2.00mm nozzle",
+		"FELIX Food Switch 2.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.05"
+	],
+	"filament_retraction_length": [
+		"1.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"10.0"
+	],
+	"filament_deretraction_speed": [
+		"10.0"
+	],
+	"filament_retract_length_toolchange": [
+		"2.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"3.0"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"108.0"
+	]
+}
@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Medium Stainless Steel Syringe @3.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "mEH3Rgzzwjq9iptd",
+	"filament_id": "OFqZSD1S",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 3.00mm nozzle",
+		"FELIX Food Double 3.00mm nozzle",
+		"FELIX Food Switch 3.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.05"
+	],
+	"filament_retraction_length": [
+		"1.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"10.0"
+	],
+	"filament_deretraction_speed": [
+		"10.0"
+	],
+	"filament_retract_length_toolchange": [
+		"2.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"4.5"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"216.0"
+	]
+}
@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Medium Stainless Steel Syringe @4.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "rJsNSIb8w9kOwhwE",
+	"filament_id": "OFqZSD1S",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 4.00mm nozzle",
+		"FELIX Food Double 4.00mm nozzle",
+		"FELIX Food Switch 4.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.05"
+	],
+	"filament_retraction_length": [
+		"1.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"10.0"
+	],
+	"filament_deretraction_speed": [
+		"10.0"
+	],
+	"filament_retract_length_toolchange": [
+		"2.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"6.0"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"432.0"
+	]
+}
@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Thick Stainless Steel Syringe @0.50mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "dJzDnkh8Kyn3phhF",
+	"filament_id": "OFjXHG0Z",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 0.50mm nozzle",
+		"FELIX Food Double 0.50mm nozzle",
+		"FELIX Food Switch 0.50mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.02"
+	],
+	"filament_retraction_length": [
+		"2.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"4.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"0.75"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"4.8"
+	]
+}
@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Thick Stainless Steel Syringe @1.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "QQi61sD4rX2jELMa",
+	"filament_id": "OFjXHG0Z",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 1.00mm nozzle",
+		"FELIX Food Double 1.00mm nozzle",
+		"FELIX Food Switch 1.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.02"
+	],
+	"filament_retraction_length": [
+		"2.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"4.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"1.5"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"18.0"
+	]
+}
@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Thick Stainless Steel Syringe @2.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "KUmfC5HZL2hXPfey",
+	"filament_id": "OFjXHG0Z",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 2.00mm nozzle",
+		"FELIX Food Double 2.00mm nozzle",
+		"FELIX Food Switch 2.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.02"
+	],
+	"filament_retraction_length": [
+		"2.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"4.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"3.0"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"72.0"
+	]
+}
@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Thick Stainless Steel Syringe @3.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "0BbaSUre1bztrKB0",
+	"filament_id": "OFjXHG0Z",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 3.00mm nozzle",
+		"FELIX Food Double 3.00mm nozzle",
+		"FELIX Food Switch 3.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.02"
+	],
+	"filament_retraction_length": [
+		"2.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"4.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"4.5"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"144.0"
+	]
+}
@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Thick Stainless Steel Syringe @4.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "b179BTbFqjhnsHPT",
+	"filament_id": "OFjXHG0Z",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 4.00mm nozzle",
+		"FELIX Food Double 4.00mm nozzle",
+		"FELIX Food Switch 4.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.02"
+	],
+	"filament_retraction_length": [
+		"2.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"4.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"6.0"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"288.0"
+	]
+}
@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Thin Plastic Syringe @0.50mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "dBTTG8HJRYb7GHqy",
+	"filament_id": "OF0kP94Y",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 0.50mm nozzle",
+		"FELIX Food Double 0.50mm nozzle",
+		"FELIX Food Switch 0.50mm nozzle"
+	],
+	"filament_diameter": [
+		"31.22"
+	],
+	"filament_flow_ratio": [
+		"1.1"
+	],
+	"filament_retraction_length": [
+		"0.75"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"1.5"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"0.75"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"10.8"
+	]
+}
@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Thin Plastic Syringe @1.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "FITfR7iepAteWuno",
+	"filament_id": "OF0kP94Y",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 1.00mm nozzle",
+		"FELIX Food Double 1.00mm nozzle",
+		"FELIX Food Switch 1.00mm nozzle"
+	],
+	"filament_diameter": [
+		"31.22"
+	],
+	"filament_flow_ratio": [
+		"1.1"
+	],
+	"filament_retraction_length": [
+		"0.75"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"1.5"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"1.5"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"40.5"
+	]
+}
@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Thin Plastic Syringe @2.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "i2DZouQfWUnIm4R5",
+	"filament_id": "OF0kP94Y",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 2.00mm nozzle",
+		"FELIX Food Double 2.00mm nozzle",
+		"FELIX Food Switch 2.00mm nozzle"
+	],
+	"filament_diameter": [
+		"31.22"
+	],
+	"filament_flow_ratio": [
+		"1.1"
+	],
+	"filament_retraction_length": [
+		"0.75"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"1.5"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"3.0"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"162.0"
+	]
+}
@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Thin Plastic Syringe @3.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "EzV8T0DVT0NRPa7P",
+	"filament_id": "OF0kP94Y",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 3.00mm nozzle",
+		"FELIX Food Double 3.00mm nozzle",
+		"FELIX Food Switch 3.00mm nozzle"
+	],
+	"filament_diameter": [
+		"31.22"
+	],
+	"filament_flow_ratio": [
+		"1.1"
+	],
+	"filament_retraction_length": [
+		"0.75"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"1.5"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"4.5"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"324.0"
+	]
+}
@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Thin Plastic Syringe @4.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "Q6msqrC9TM0un5qw",
+	"filament_id": "OF0kP94Y",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 4.00mm nozzle",
+		"FELIX Food Double 4.00mm nozzle",
+		"FELIX Food Switch 4.00mm nozzle"
+	],
+	"filament_diameter": [
+		"31.22"
+	],
+	"filament_flow_ratio": [
+		"1.1"
+	],
+	"filament_retraction_length": [
+		"0.75"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"1.5"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"6.0"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"648.0"
+	]
+}
@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Thin Stainless Steel Syringe @0.50mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "I9W6tiEnRSMrkyzl",
+	"filament_id": "OF40XIE8",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 0.50mm nozzle",
+		"FELIX Food Double 0.50mm nozzle",
+		"FELIX Food Switch 0.50mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.1"
+	],
+	"filament_retraction_length": [
+		"0.2"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"10.0"
+	],
+	"filament_deretraction_speed": [
+		"10.0"
+	],
+	"filament_retract_length_toolchange": [
+		"0.4"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"0.75"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"10.8"
+	]
+}
@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Thin Stainless Steel Syringe @1.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "PJpJ8TTlDajNrRJo",
+	"filament_id": "OF40XIE8",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 1.00mm nozzle",
+		"FELIX Food Double 1.00mm nozzle",
+		"FELIX Food Switch 1.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.1"
+	],
+	"filament_retraction_length": [
+		"0.2"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"10.0"
+	],
+	"filament_deretraction_speed": [
+		"10.0"
+	],
+	"filament_retract_length_toolchange": [
+		"0.4"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"1.5"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"40.5"
+	]
+}
@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Thin Stainless Steel Syringe @2.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "s3GOL7BWdRbaV4GM",
+	"filament_id": "OF40XIE8",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 2.00mm nozzle",
+		"FELIX Food Double 2.00mm nozzle",
+		"FELIX Food Switch 2.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.1"
+	],
+	"filament_retraction_length": [
+		"0.2"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"10.0"
+	],
+	"filament_deretraction_speed": [
+		"10.0"
+	],
+	"filament_retract_length_toolchange": [
+		"0.4"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"3.0"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"162.0"
+	]
+}
@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Thin Stainless Steel Syringe @3.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "WKPEMCVctL0c5FFi",
+	"filament_id": "OF40XIE8",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 3.00mm nozzle",
+		"FELIX Food Double 3.00mm nozzle",
+		"FELIX Food Switch 3.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.1"
+	],
+	"filament_retraction_length": [
+		"0.2"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"10.0"
+	],
+	"filament_deretraction_speed": [
+		"10.0"
+	],
+	"filament_retract_length_toolchange": [
+		"0.4"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"4.5"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"324.0"
+	]
+}
@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Thin Stainless Steel Syringe @4.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "I5UEkm93zhn9hdMF",
+	"filament_id": "OF40XIE8",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 4.00mm nozzle",
+		"FELIX Food Double 4.00mm nozzle",
+		"FELIX Food Switch 4.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.1"
+	],
+	"filament_retraction_length": [
+		"0.2"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"10.0"
+	],
+	"filament_deretraction_speed": [
+		"10.0"
+	],
+	"filament_retract_length_toolchange": [
+		"0.4"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"6.0"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"648.0"
+	]
+}
@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Very Thick Stainless Steel Syringe @1.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "OIZKSwXaRY7WZecX",
+	"filament_id": "OF0xT5HR",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 1.00mm nozzle",
+		"FELIX Food Double 1.00mm nozzle",
+		"FELIX Food Switch 1.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_retraction_length": [
+		"2.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"4.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"0.75"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"13.5"
+	]
+}
@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Very Thick Stainless Steel Syringe @2.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "al27KBjL9MAi3ri9",
+	"filament_id": "OF0xT5HR",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 2.00mm nozzle",
+		"FELIX Food Double 2.00mm nozzle",
+		"FELIX Food Switch 2.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_retraction_length": [
+		"2.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"4.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"1.5"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"53.0"
+	]
+}
@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Very Thick Stainless Steel Syringe @3.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "42ADzpr7vGuh3AKC",
+	"filament_id": "OF0xT5HR",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 3.00mm nozzle",
+		"FELIX Food Double 3.00mm nozzle",
+		"FELIX Food Switch 3.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_retraction_length": [
+		"2.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"4.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"3.0"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"108.0"
+	]
+}
@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Very Thick Stainless Steel Syringe @4.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "FpQC7Cf5qnW1E2QO",
+	"filament_id": "OF0xT5HR",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 4.00mm nozzle",
+		"FELIX Food Double 4.00mm nozzle",
+		"FELIX Food Switch 4.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_retraction_length": [
+		"2.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"4.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"4.5"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"216.0"
+	]
+}
@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Very Thin Plastic Syringe @0.50mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "9OMbRBrVCyDD6A2k",
+	"filament_id": "OF1XcHqz",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 0.50mm nozzle",
+		"FELIX Food Double 0.50mm nozzle",
+		"FELIX Food Switch 0.50mm nozzle"
+	],
+	"filament_diameter": [
+		"31.22"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_retraction_length": [
+		"0.5"
+	],
+	"filament_retract_restart_extra": [
+		"0.03"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"1.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"0.75"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"14.4"
+	]
+}
@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Very Thin Plastic Syringe @1.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "ukd2jpvA1sHePEfs",
+	"filament_id": "OF1XcHqz",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 1.00mm nozzle",
+		"FELIX Food Double 1.00mm nozzle",
+		"FELIX Food Switch 1.00mm nozzle"
+	],
+	"filament_diameter": [
+		"31.22"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_retraction_length": [
+		"0.5"
+	],
+	"filament_retract_restart_extra": [
+		"0.03"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"1.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"1.5"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"54.0"
+	]
+}
@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Very Thin Plastic Syringe @2.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "jXkY0MPClCiaCJGC",
+	"filament_id": "OF1XcHqz",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 2.00mm nozzle",
+		"FELIX Food Double 2.00mm nozzle",
+		"FELIX Food Switch 2.00mm nozzle"
+	],
+	"filament_diameter": [
+		"31.22"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_retraction_length": [
+		"0.5"
+	],
+	"filament_retract_restart_extra": [
+		"0.03"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"1.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"3.0"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"218.0"
+	]
+}
@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Very Thin Plastic Syringe @3.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "jSTp7ePK9UKaNX3S",
+	"filament_id": "OF1XcHqz",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 3.00mm nozzle",
+		"FELIX Food Double 3.00mm nozzle",
+		"FELIX Food Switch 3.00mm nozzle"
+	],
+	"filament_diameter": [
+		"31.22"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_retraction_length": [
+		"0.5"
+	],
+	"filament_retract_restart_extra": [
+		"0.03"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"1.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"4.5"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"432.0"
+	]
+}
@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Very Thin Plastic Syringe @4.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "q3tLnporrSrlZl6S",
+	"filament_id": "OF1XcHqz",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 4.00mm nozzle",
+		"FELIX Food Double 4.00mm nozzle",
+		"FELIX Food Switch 4.00mm nozzle"
+	],
+	"filament_diameter": [
+		"31.22"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_retraction_length": [
+		"0.5"
+	],
+	"filament_retract_restart_extra": [
+		"0.03"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"1.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"6.0"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"864.0"
+	]
+}
@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Very Thin Stainless Steel  Syringe  @1.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "ZGtJ5dq6QEFrRzER",
+	"filament_id": "OFJDz9xO",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 1.00mm nozzle",
+		"FELIX Food Double 1.00mm nozzle",
+		"FELIX Food Switch 1.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_retraction_length": [
+		"0.1"
+	],
+	"filament_retract_restart_extra": [
+		"0.03"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"0.2"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.03"
+	],
+	"filament_wipe_distance": [
+		"1.5"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"54.0"
+	]
+}
@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Very Thin Stainless Steel  Syringe  @2.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "il7EvApOb39ReoAt",
+	"filament_id": "OFJDz9xO",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 2.00mm nozzle",
+		"FELIX Food Double 2.00mm nozzle",
+		"FELIX Food Switch 2.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_retraction_length": [
+		"0.1"
+	],
+	"filament_retract_restart_extra": [
+		"0.03"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"0.2"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.03"
+	],
+	"filament_wipe_distance": [
+		"3.0"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"216.0"
+	]
+}
@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Very Thin Stainless Steel  Syringe  @3.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "yTSl3aV0S2HD6zPy",
+	"filament_id": "OFJDz9xO",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 3.00mm nozzle",
+		"FELIX Food Double 3.00mm nozzle",
+		"FELIX Food Switch 3.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_retraction_length": [
+		"0.1"
+	],
+	"filament_retract_restart_extra": [
+		"0.03"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"0.2"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.03"
+	],
+	"filament_wipe_distance": [
+		"4.5"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"432.0"
+	]
+}
@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Very Thin Stainless Steel  Syringe  @4.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "JfnwH4HjP0CQKuyr",
+	"filament_id": "OFJDz9xO",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 4.00mm nozzle",
+		"FELIX Food Double 4.00mm nozzle",
+		"FELIX Food Switch 4.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_retraction_length": [
+		"0.1"
+	],
+	"filament_retract_restart_extra": [
+		"0.03"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"0.2"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.03"
+	],
+	"filament_wipe_distance": [
+		"6.0"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"864.0"
+	]
+}
@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Very Thin Stainless Steel Syringe @0.50mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "mIgwxwB2N67qAhxk",
+	"filament_id": "OFASY29j",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 0.50mm nozzle",
+		"FELIX Food Double 0.50mm nozzle",
+		"FELIX Food Switch 0.50mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_retraction_length": [
+		"0.1"
+	],
+	"filament_retract_restart_extra": [
+		"0.03"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"0.2"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.03"
+	],
+	"filament_wipe_distance": [
+		"0.75"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"14.4"
+	]
+}
@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX FLEX  Brass @ 0.35mm",
+	"inherits": "fdm_filament_flex",
+	"from": "system",
+	"setting_id": "UXX0sEaoqZvdXwi6",
+	"filament_id": "OFF6vK3j",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.35mm nozzle",
+		"FELIX Pro L 3.0 0.35mm nozzle",
+		"FELIX Pro XL 3.0 0.35mm nozzle",
+		"FELIX Tec 4 0.35mm nozzle"
+	],
+	"nozzle_temperature": [
+		"215.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"215.0"
+	],
+	"hot_plate_temp": [
+		"40.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"cool_plate_temp": [
+		"40.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"eng_plate_temp": [
+		"40.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"textured_plate_temp": [
+		"40.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"2.2"
+	],
+	"filament_retract_speed": [
+		"50.0"
+	],
+	"filament_retraction_speed": [
+		"50.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.05"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"60.0"
+	],
+	"fan_max_speed": [
+		"60.0"
+	],
+	"filament_density": [
+		"1.38"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}
@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX FLEX  Brass @ 0.50mm",
+	"inherits": "fdm_filament_flex",
+	"from": "system",
+	"setting_id": "B4AmHHxdvhsjN34a",
+	"filament_id": "OFF6vK3j",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.50mm nozzle",
+		"FELIX Pro L 3.0 0.50mm nozzle",
+		"FELIX Pro XL 3.0 0.50mm nozzle",
+		"FELIX Tec 4 0.50mm nozzle"
+	],
+	"nozzle_temperature": [
+		"215.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"215.0"
+	],
+	"hot_plate_temp": [
+		"40.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"cool_plate_temp": [
+		"40.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"eng_plate_temp": [
+		"40.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"textured_plate_temp": [
+		"40.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"2.2"
+	],
+	"filament_retract_speed": [
+		"50.0"
+	],
+	"filament_retraction_speed": [
+		"50.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.05"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"60.0"
+	],
+	"fan_max_speed": [
+		"60.0"
+	],
+	"filament_density": [
+		"1.38"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}
@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX FLEX Hardened Steel @ 0.25mm",
+	"inherits": "fdm_filament_flex",
+	"from": "system",
+	"setting_id": "7z6rkaF5DBbiccZP",
+	"filament_id": "OFSOY4F3",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.25mm nozzle",
+		"FELIX Pro L 3.0 0.25mm nozzle",
+		"FELIX Pro XL 3.0 0.25mm nozzle",
+		"FELIX Tec 4 0.25mm nozzle"
+	],
+	"nozzle_temperature": [
+		"225.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"225.0"
+	],
+	"hot_plate_temp": [
+		"40.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"cool_plate_temp": [
+		"40.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"eng_plate_temp": [
+		"40.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"textured_plate_temp": [
+		"40.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"2.2"
+	],
+	"filament_retract_speed": [
+		"50.0"
+	],
+	"filament_retraction_speed": [
+		"50.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.05"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"60.0"
+	],
+	"fan_max_speed": [
+		"60.0"
+	],
+	"filament_density": [
+		"1.38"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}
@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX FLEX Hardened Steel @ 0.35mm",
+	"inherits": "fdm_filament_flex",
+	"from": "system",
+	"setting_id": "DJRiMo6Aq0BvhFC9",
+	"filament_id": "OFSOY4F3",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.35mm nozzle",
+		"FELIX Pro L 3.0 0.35mm nozzle",
+		"FELIX Pro XL 3.0 0.35mm nozzle",
+		"FELIX Tec 4 0.35mm nozzle"
+	],
+	"nozzle_temperature": [
+		"225.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"225.0"
+	],
+	"hot_plate_temp": [
+		"40.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"cool_plate_temp": [
+		"40.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"eng_plate_temp": [
+		"40.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"textured_plate_temp": [
+		"40.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"2.2"
+	],
+	"filament_retract_speed": [
+		"50.0"
+	],
+	"filament_retraction_speed": [
+		"50.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.05"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"60.0"
+	],
+	"fan_max_speed": [
+		"60.0"
+	],
+	"filament_density": [
+		"1.38"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}
@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX FLEX Hardened Steel @ 0.50mm",
+	"inherits": "fdm_filament_flex",
+	"from": "system",
+	"setting_id": "xgFrl1QpyQFFqBYz",
+	"filament_id": "OFSOY4F3",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.50mm nozzle",
+		"FELIX Pro L 3.0 0.50mm nozzle",
+		"FELIX Pro XL 3.0 0.50mm nozzle",
+		"FELIX Tec 4 0.50mm nozzle"
+	],
+	"nozzle_temperature": [
+		"225.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"225.0"
+	],
+	"hot_plate_temp": [
+		"40.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"cool_plate_temp": [
+		"40.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"eng_plate_temp": [
+		"40.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"textured_plate_temp": [
+		"40.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"2.2"
+	],
+	"filament_retract_speed": [
+		"50.0"
+	],
+	"filament_retraction_speed": [
+		"50.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.05"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"60.0"
+	],
+	"fan_max_speed": [
+		"60.0"
+	],
+	"filament_density": [
+		"1.38"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}
@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX FLEX Hardened Steel @ 0.70mm",
+	"inherits": "fdm_filament_flex",
+	"from": "system",
+	"setting_id": "eZf8u1vzaQbsjyqO",
+	"filament_id": "OFSOY4F3",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.70mm nozzle",
+		"FELIX Pro L 3.0 0.70mm nozzle",
+		"FELIX Pro XL 3.0 0.70mm nozzle",
+		"FELIX Tec 4 0.70mm nozzle"
+	],
+	"nozzle_temperature": [
+		"225.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"225.0"
+	],
+	"hot_plate_temp": [
+		"40.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"cool_plate_temp": [
+		"40.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"eng_plate_temp": [
+		"40.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"textured_plate_temp": [
+		"40.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"2.2"
+	],
+	"filament_retract_speed": [
+		"50.0"
+	],
+	"filament_retraction_speed": [
+		"50.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.05"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"60.0"
+	],
+	"fan_max_speed": [
+		"60.0"
+	],
+	"filament_density": [
+		"1.38"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}
@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX PETG Brass @ 0.35mm",
+	"inherits": "fdm_filament_pet",
+	"from": "system",
+	"setting_id": "KZzk6aIxMvt1JlOR",
+	"filament_id": "OF17qLwN",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.35mm nozzle",
+		"FELIX Pro L 3.0 0.35mm nozzle",
+		"FELIX Pro XL 3.0 0.35mm nozzle",
+		"FELIX Tec 4 0.35mm nozzle"
+	],
+	"nozzle_temperature": [
+		"220.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220.0"
+	],
+	"hot_plate_temp": [
+		"75.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"cool_plate_temp": [
+		"75.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"eng_plate_temp": [
+		"75.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"textured_plate_temp": [
+		"75.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"1.2"
+	],
+	"filament_retract_speed": [
+		"60.0"
+	],
+	"filament_retraction_speed": [
+		"60.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.05"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"60.0"
+	],
+	"fan_max_speed": [
+		"60.0"
+	],
+	"filament_density": [
+		"1.27"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}
@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX PETG Brass @ 0.50mm",
+	"inherits": "fdm_filament_pet",
+	"from": "system",
+	"setting_id": "RWPOGeCx1EEYeV8R",
+	"filament_id": "OF17qLwN",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.50mm nozzle",
+		"FELIX Pro L 3.0 0.50mm nozzle",
+		"FELIX Pro XL 3.0 0.50mm nozzle",
+		"FELIX Tec 4 0.50mm nozzle"
+	],
+	"nozzle_temperature": [
+		"220.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220.0"
+	],
+	"hot_plate_temp": [
+		"75.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"cool_plate_temp": [
+		"75.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"eng_plate_temp": [
+		"75.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"textured_plate_temp": [
+		"75.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"1.2"
+	],
+	"filament_retract_speed": [
+		"60.0"
+	],
+	"filament_retraction_speed": [
+		"60.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.05"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"60.0"
+	],
+	"fan_max_speed": [
+		"60.0"
+	],
+	"filament_density": [
+		"1.27"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}
@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX PETG Hardened Steel @ 0.25mm",
+	"inherits": "fdm_filament_pet",
+	"from": "system",
+	"setting_id": "5RK6gGxFKyADXi4x",
+	"filament_id": "OFQo5ZHk",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.25mm nozzle",
+		"FELIX Pro L 3.0 0.25mm nozzle",
+		"FELIX Pro XL 3.0 0.25mm nozzle",
+		"FELIX Tec 4 0.25mm nozzle"
+	],
+	"nozzle_temperature": [
+		"235.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"235.0"
+	],
+	"hot_plate_temp": [
+		"75.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"cool_plate_temp": [
+		"75.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"eng_plate_temp": [
+		"75.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"textured_plate_temp": [
+		"75.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"1.2"
+	],
+	"filament_retract_speed": [
+		"60.0"
+	],
+	"filament_retraction_speed": [
+		"60.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.05"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"60.0"
+	],
+	"fan_max_speed": [
+		"60.0"
+	],
+	"filament_density": [
+		"1.27"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}
@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX PETG Hardened Steel @ 0.35mm",
+	"inherits": "fdm_filament_pet",
+	"from": "system",
+	"setting_id": "rz08j2cn8mlnvAxh",
+	"filament_id": "OFQo5ZHk",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.35mm nozzle",
+		"FELIX Pro L 3.0 0.35mm nozzle",
+		"FELIX Pro XL 3.0 0.35mm nozzle",
+		"FELIX Tec 4 0.35mm nozzle"
+	],
+	"nozzle_temperature": [
+		"235.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"235.0"
+	],
+	"hot_plate_temp": [
+		"75.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"cool_plate_temp": [
+		"75.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"eng_plate_temp": [
+		"75.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"textured_plate_temp": [
+		"75.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"1.2"
+	],
+	"filament_retract_speed": [
+		"60.0"
+	],
+	"filament_retraction_speed": [
+		"60.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.05"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"60.0"
+	],
+	"fan_max_speed": [
+		"60.0"
+	],
+	"filament_density": [
+		"1.27"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}
@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX PETG Hardened Steel @ 0.50mm",
+	"inherits": "fdm_filament_pet",
+	"from": "system",
+	"setting_id": "1xOwhrqAqJVO48d0",
+	"filament_id": "OFQo5ZHk",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.50mm nozzle",
+		"FELIX Pro L 3.0 0.50mm nozzle",
+		"FELIX Pro XL 3.0 0.50mm nozzle",
+		"FELIX Tec 4 0.50mm nozzle"
+	],
+	"nozzle_temperature": [
+		"235.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"235.0"
+	],
+	"hot_plate_temp": [
+		"75.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"cool_plate_temp": [
+		"75.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"eng_plate_temp": [
+		"75.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"textured_plate_temp": [
+		"75.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"1.2"
+	],
+	"filament_retract_speed": [
+		"60.0"
+	],
+	"filament_retraction_speed": [
+		"60.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.05"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"60.0"
+	],
+	"fan_max_speed": [
+		"60.0"
+	],
+	"filament_density": [
+		"1.27"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}
@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX PETG Hardened Steel @ 0.70mm",
+	"inherits": "fdm_filament_pet",
+	"from": "system",
+	"setting_id": "I2QXz0yDQN6ULNeF",
+	"filament_id": "OFQo5ZHk",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.70mm nozzle",
+		"FELIX Pro L 3.0 0.70mm nozzle",
+		"FELIX Pro XL 3.0 0.70mm nozzle",
+		"FELIX Tec 4 0.70mm nozzle"
+	],
+	"nozzle_temperature": [
+		"235.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"235.0"
+	],
+	"hot_plate_temp": [
+		"75.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"cool_plate_temp": [
+		"75.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"eng_plate_temp": [
+		"75.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"textured_plate_temp": [
+		"75.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"1.2"
+	],
+	"filament_retract_speed": [
+		"60.0"
+	],
+	"filament_retraction_speed": [
+		"60.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.05"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"60.0"
+	],
+	"fan_max_speed": [
+		"60.0"
+	],
+	"filament_density": [
+		"1.27"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}
@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX Premium PLA Brass @ 0.35mm",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "6Ax3SY7RI04PcFFJ",
+	"filament_id": "OF8sLgrm",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.35mm nozzle",
+		"FELIX Pro L 3.0 0.35mm nozzle",
+		"FELIX Pro XL 3.0 0.35mm nozzle",
+		"FELIX Tec 4 0.35mm nozzle"
+	],
+	"nozzle_temperature": [
+		"190.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"190.0"
+	],
+	"hot_plate_temp": [
+		"55.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"cool_plate_temp": [
+		"55.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"eng_plate_temp": [
+		"55.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"textured_plate_temp": [
+		"55.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"1.4"
+	],
+	"filament_retract_speed": [
+		"50.0"
+	],
+	"filament_retraction_speed": [
+		"50.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.05"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"100.0"
+	],
+	"fan_max_speed": [
+		"100.0"
+	],
+	"filament_density": [
+		"1.22"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}
@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX Premium PLA Brass @ 0.50mm",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "TzRWTEZl14IWlhrc",
+	"filament_id": "OF8sLgrm",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.50mm nozzle",
+		"FELIX Pro L 3.0 0.50mm nozzle",
+		"FELIX Pro XL 3.0 0.50mm nozzle",
+		"FELIX Tec 4 0.50mm nozzle"
+	],
+	"nozzle_temperature": [
+		"190.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"190.0"
+	],
+	"hot_plate_temp": [
+		"55.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"cool_plate_temp": [
+		"55.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"eng_plate_temp": [
+		"55.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"textured_plate_temp": [
+		"55.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"1.4"
+	],
+	"filament_retract_speed": [
+		"50.0"
+	],
+	"filament_retraction_speed": [
+		"50.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.05"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"100.0"
+	],
+	"fan_max_speed": [
+		"100.0"
+	],
+	"filament_density": [
+		"1.22"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}
@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX Premium PLA Hardened Steel @ 0.25mm",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "RtjX1Noxcsnv5cHv",
+	"filament_id": "OFi00jWL",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.25mm nozzle",
+		"FELIX Pro L 3.0 0.25mm nozzle",
+		"FELIX Pro XL 3.0 0.25mm nozzle",
+		"FELIX Tec 4 0.25mm nozzle"
+	],
+	"nozzle_temperature": [
+		"205.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"205.0"
+	],
+	"hot_plate_temp": [
+		"55.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"cool_plate_temp": [
+		"55.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"eng_plate_temp": [
+		"55.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"textured_plate_temp": [
+		"55.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"1.4"
+	],
+	"filament_retract_speed": [
+		"50.0"
+	],
+	"filament_retraction_speed": [
+		"50.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.05"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"100.0"
+	],
+	"fan_max_speed": [
+		"100.0"
+	],
+	"filament_density": [
+		"1.22"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}
@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX Premium PLA Hardened Steel @ 0.35mm",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "aQI8mIoLrX3liAlM",
+	"filament_id": "OFi00jWL",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.35mm nozzle",
+		"FELIX Pro L 3.0 0.35mm nozzle",
+		"FELIX Pro XL 3.0 0.35mm nozzle",
+		"FELIX Tec 4 0.35mm nozzle"
+	],
+	"nozzle_temperature": [
+		"205.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"205.0"
+	],
+	"hot_plate_temp": [
+		"55.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"cool_plate_temp": [
+		"55.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"eng_plate_temp": [
+		"55.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"textured_plate_temp": [
+		"55.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"1.4"
+	],
+	"filament_retract_speed": [
+		"50.0"
+	],
+	"filament_retraction_speed": [
+		"50.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.05"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"100.0"
+	],
+	"fan_max_speed": [
+		"100.0"
+	],
+	"filament_density": [
+		"1.22"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}
@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX Premium PLA Hardened Steel @ 0.50mm",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "pdnfmqbhfYXV8MAj",
+	"filament_id": "OFi00jWL",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.50mm nozzle",
+		"FELIX Pro L 3.0 0.50mm nozzle",
+		"FELIX Pro XL 3.0 0.50mm nozzle",
+		"FELIX Tec 4 0.50mm nozzle"
+	],
+	"nozzle_temperature": [
+		"205.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"205.0"
+	],
+	"hot_plate_temp": [
+		"55.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"cool_plate_temp": [
+		"55.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"eng_plate_temp": [
+		"55.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"textured_plate_temp": [
+		"55.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"1.4"
+	],
+	"filament_retract_speed": [
+		"50.0"
+	],
+	"filament_retraction_speed": [
+		"50.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.05"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"100.0"
+	],
+	"fan_max_speed": [
+		"100.0"
+	],
+	"filament_density": [
+		"1.22"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}
@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX Premium PLA Hardened Steel @ 0.70mm",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "BDxehnk3kKVRlysR",
+	"filament_id": "OFi00jWL",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.70mm nozzle",
+		"FELIX Pro L 3.0 0.70mm nozzle",
+		"FELIX Pro XL 3.0 0.70mm nozzle",
+		"FELIX Tec 4 0.70mm nozzle"
+	],
+	"nozzle_temperature": [
+		"205.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"205.0"
+	],
+	"hot_plate_temp": [
+		"55.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"cool_plate_temp": [
+		"55.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"eng_plate_temp": [
+		"55.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"textured_plate_temp": [
+		"55.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"1.4"
+	],
+	"filament_retract_speed": [
+		"50.0"
+	],
+	"filament_retraction_speed": [
+		"50.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.05"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"100.0"
+	],
+	"fan_max_speed": [
+		"100.0"
+	],
+	"filament_density": [
+		"1.22"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}
@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX Wood  Brass @ 0.35mm",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "nRikN9oc1mOeA6dO",
+	"filament_id": "OF7CzDzq",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.35mm nozzle",
+		"FELIX Pro L 3.0 0.35mm nozzle",
+		"FELIX Pro XL 3.0 0.35mm nozzle",
+		"FELIX Tec 4 0.35mm nozzle"
+	],
+	"nozzle_temperature": [
+		"185.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"185.0"
+	],
+	"hot_plate_temp": [
+		"55.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"cool_plate_temp": [
+		"55.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"eng_plate_temp": [
+		"55.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"textured_plate_temp": [
+		"55.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"2.5"
+	],
+	"filament_retract_speed": [
+		"60.0"
+	],
+	"filament_retraction_speed": [
+		"60.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.15"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"100.0"
+	],
+	"fan_max_speed": [
+		"100.0"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}
@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX Wood Brass @ 0.50mm",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "SF4eGuHqUCtfEAGy",
+	"filament_id": "OFKwdz3w",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.50mm nozzle",
+		"FELIX Pro L 3.0 0.50mm nozzle",
+		"FELIX Pro XL 3.0 0.50mm nozzle",
+		"FELIX Tec 4 0.50mm nozzle"
+	],
+	"nozzle_temperature": [
+		"185.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"185.0"
+	],
+	"hot_plate_temp": [
+		"55.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"cool_plate_temp": [
+		"55.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"eng_plate_temp": [
+		"55.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"textured_plate_temp": [
+		"55.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"2.5"
+	],
+	"filament_retract_speed": [
+		"60.0"
+	],
+	"filament_retraction_speed": [
+		"60.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.15"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"100.0"
+	],
+	"fan_max_speed": [
+		"100.0"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}
@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX Wood Hardened Steel @ 0.25mm",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "AkZV2IjFVNLytIaY",
+	"filament_id": "OFsMMDMp",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.25mm nozzle",
+		"FELIX Pro L 3.0 0.25mm nozzle",
+		"FELIX Pro XL 3.0 0.25mm nozzle",
+		"FELIX Tec 4 0.25mm nozzle"
+	],
+	"nozzle_temperature": [
+		"200.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"200.0"
+	],
+	"hot_plate_temp": [
+		"55.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"cool_plate_temp": [
+		"55.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"eng_plate_temp": [
+		"55.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"textured_plate_temp": [
+		"55.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"2.5"
+	],
+	"filament_retract_speed": [
+		"60.0"
+	],
+	"filament_retraction_speed": [
+		"60.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.15"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"100.0"
+	],
+	"fan_max_speed": [
+		"100.0"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}
@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX Wood Hardened Steel @ 0.35mm",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "MEGMFP2nv59vZSpf",
+	"filament_id": "OFsMMDMp",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.35mm nozzle",
+		"FELIX Pro L 3.0 0.35mm nozzle",
+		"FELIX Pro XL 3.0 0.35mm nozzle",
+		"FELIX Tec 4 0.35mm nozzle"
+	],
+	"nozzle_temperature": [
+		"200.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"200.0"
+	],
+	"hot_plate_temp": [
+		"55.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"cool_plate_temp": [
+		"55.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"eng_plate_temp": [
+		"55.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"textured_plate_temp": [
+		"55.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"2.5"
+	],
+	"filament_retract_speed": [
+		"60.0"
+	],
+	"filament_retraction_speed": [
+		"60.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.15"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"100.0"
+	],
+	"fan_max_speed": [
+		"100.0"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}
@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX Wood Hardened Steel @ 0.50mm",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "ObSufa3ZQ8tUmJUB",
+	"filament_id": "OFsMMDMp",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.50mm nozzle",
+		"FELIX Pro L 3.0 0.50mm nozzle",
+		"FELIX Pro XL 3.0 0.50mm nozzle",
+		"FELIX Tec 4 0.50mm nozzle"
+	],
+	"nozzle_temperature": [
+		"200.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"200.0"
+	],
+	"hot_plate_temp": [
+		"55.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"cool_plate_temp": [
+		"55.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"eng_plate_temp": [
+		"55.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"textured_plate_temp": [
+		"55.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"2.5"
+	],
+	"filament_retract_speed": [
+		"60.0"
+	],
+	"filament_retraction_speed": [
+		"60.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.15"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"100.0"
+	],
+	"fan_max_speed": [
+		"100.0"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}
@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX Wood Hardened Steel @ 0.70mm",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "LCRYcNn6HN4lviM2",
+	"filament_id": "OFsMMDMp",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.70mm nozzle",
+		"FELIX Pro L 3.0 0.70mm nozzle",
+		"FELIX Pro XL 3.0 0.70mm nozzle",
+		"FELIX Tec 4 0.70mm nozzle"
+	],
+	"nozzle_temperature": [
+		"200.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"200.0"
+	],
+	"hot_plate_temp": [
+		"55.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"cool_plate_temp": [
+		"55.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"eng_plate_temp": [
+		"55.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"textured_plate_temp": [
+		"55.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"2.5"
+	],
+	"filament_retract_speed": [
+		"60.0"
+	],
+	"filament_retraction_speed": [
+		"60.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.15"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"100.0"
+	],
+	"fan_max_speed": [
+		"100.0"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}
@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FORMFUTURA AppoloX ASA Brass @ 0.35mm",
+	"inherits": "fdm_filament_asa",
+	"from": "system",
+	"setting_id": "gRmosSxV2WFOgLAa",
+	"filament_id": "OFEUX7D3",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.35mm nozzle",
+		"FELIX Pro L 3.0 0.35mm nozzle",
+		"FELIX Pro XL 3.0 0.35mm nozzle",
+		"FELIX Tec 4 0.35mm nozzle"
+	],
+	"nozzle_temperature": [
+		"235.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"235.0"
+	],
+	"hot_plate_temp": [
+		"90.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"90.0"
+	],
+	"cool_plate_temp": [
+		"90.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"90.0"
+	],
+	"eng_plate_temp": [
+		"90.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"90.0"
+	],
+	"textured_plate_temp": [
+		"90.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"90.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"140"
+	],
+	"filament_retract_length": [
+		"1.4"
+	],
+	"filament_retract_speed": [
+		"50.0"
+	],
+	"filament_retraction_speed": [
+		"50.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"40.0"
+	],
+	"fan_max_speed": [
+		"40.0"
+	],
+	"filament_density": [
+		"1.07"
+	],
+	"filament_vendor": [
+		"FORMFUTURA"
+	]
+}
@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FORMFUTURA AppoloX ASA Brass @ 0.50mm",
+	"inherits": "fdm_filament_asa",
+	"from": "system",
+	"setting_id": "iXdebkq6x0RsCLSh",
+	"filament_id": "OFEUX7D3",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.50mm nozzle",
+		"FELIX Pro L 3.0 0.50mm nozzle",
+		"FELIX Pro XL 3.0 0.50mm nozzle",
+		"FELIX Tec 4 0.50mm nozzle"
+	],
+	"nozzle_temperature": [
+		"235.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"235.0"
+	],
+	"hot_plate_temp": [
+		"90.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"90.0"
+	],
+	"cool_plate_temp": [
+		"90.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"90.0"
+	],
+	"eng_plate_temp": [
+		"90.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"90.0"
+	],
+	"textured_plate_temp": [
+		"90.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"90.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"140"
+	],
+	"filament_retract_length": [
+		"1.4"
+	],
+	"filament_retract_speed": [
+		"50.0"
+	],
+	"filament_retraction_speed": [
+		"50.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"40.0"
+	],
+	"fan_max_speed": [
+		"40.0"
+	],
+	"filament_density": [
+		"1.07"
+	],
+	"filament_vendor": [
+		"FORMFUTURA"
+	]
+}
@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FORMFUTURA AppoloX ASA Hardened Steel @ 0.25mm",
+	"inherits": "fdm_filament_asa",
+	"from": "system",
+	"setting_id": "vDwvCcVTrlXsApST",
+	"filament_id": "OFguQdOr",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.25mm nozzle",
+		"FELIX Pro L 3.0 0.25mm nozzle",
+		"FELIX Pro XL 3.0 0.25mm nozzle",
+		"FELIX Tec 4 0.25mm nozzle"
+	],
+	"nozzle_temperature": [
+		"245.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"245.0"
+	],
+	"hot_plate_temp": [
+		"90.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"90.0"
+	],
+	"cool_plate_temp": [
+		"90.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"90.0"
+	],
+	"eng_plate_temp": [
+		"90.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"90.0"
+	],
+	"textured_plate_temp": [
+		"90.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"90.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"140"
+	],
+	"filament_retract_length": [
+		"1.4"
+	],
+	"filament_retract_speed": [
+		"50.0"
+	],
+	"filament_retraction_speed": [
+		"50.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"40.0"
+	],
+	"fan_max_speed": [
+		"40.0"
+	],
+	"filament_density": [
+		"1.07"
+	],
+	"filament_vendor": [
+		"FORMFUTURA"
+	]
+}
@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FORMFUTURA AppoloX ASA Hardened Steel @ 0.35mm",
+	"inherits": "fdm_filament_asa",
+	"from": "system",
+	"setting_id": "WdP7DnbgAI8O4JOR",
+	"filament_id": "OFguQdOr",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.35mm nozzle",
+		"FELIX Pro L 3.0 0.35mm nozzle",
+		"FELIX Pro XL 3.0 0.35mm nozzle",
+		"FELIX Tec 4 0.35mm nozzle"
+	],
+	"nozzle_temperature": [
+		"245.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"245.0"
+	],
+	"hot_plate_temp": [
+		"90.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"90.0"
+	],
+	"cool_plate_temp": [
+		"90.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"90.0"
+	],
+	"eng_plate_temp": [
+		"90.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"90.0"
+	],
+	"textured_plate_temp": [
+		"90.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"90.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"140"
+	],
+	"filament_retract_length": [
+		"1.4"
+	],
+	"filament_retract_speed": [
+		"50.0"
+	],
+	"filament_retraction_speed": [
+		"50.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"40.0"
+	],
+	"fan_max_speed": [
+		"40.0"
+	],
+	"filament_density": [
+		"1.07"
+	],
+	"filament_vendor": [
+		"FORMFUTURA"
+	]
+}
--- a/Show More
+++ b/Show More