mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-10-12 18:31:18 +00:00
Compare commits
19
Commits
| Author | SHA1 | Date | |
|---|---|---|---|
 Ian Chua
|
e2911ac6e6 | ||
|
Ian Chua
|
a8f35ed484 | ||
|
HanifKoh
|
0cec10748e | ||
|
HanifKoh
|
c55f9c2251 | ||
|
SoftFever
|
d2675f15d1 | ||
|
HanifKoh
|
5371c85362 | ||
|
SoftFever
|
a243941b72 | ||
|
SoftFever
|
6a1a5d51e9 | ||
|
HanifKoh
|
e625845b34 | ||
|
SoftFever
|
01b340dee1 | ||
|
HanifKoh
|
4c2a63e11e | ||
|
HanifKoh
|
f8cf34c55b | ||
|
SoftFever
|
d007134001 | ||
|
SoftFever
|
00d11a7ba0 | ||
|
Šimon
|
70f518d87a | ||
|
Boris SamorodovandClaude Opus 5.5
|
546b9c621d | ||
|
SoftFever
|
a13089d357 | ||
|
KrishManan
|
fb6c93963d | ||
|
KrishManan
|
7688f7a16c |
@@ -62,23 +62,6 @@ Clipper2 behaves differently by default, the wrapper adjusts it.
|
||||
clip do not leave slivers.
|
||||
- Open polylines are clipped with the non-zero rule and keep their direction.
|
||||
|
||||
### Tiled booleans
|
||||
|
||||
The sweep slows down with the number of edges crossing a scan line, so a layer
|
||||
cut into thousands of pieces makes every whole-layer boolean expensive.
|
||||
`diff_ex_by_piece()` and `intersection_ex_by_piece()` take a subject of
|
||||
non-overlapping `ExPolygons`, group them into tiles with
|
||||
`ClipperUtils::tile_expolygons()`, and run each tile in parallel against only
|
||||
the clip polygons near it, cut to the tile's box. Below 128 pieces there is a
|
||||
single tile, and they are the plain `diff_ex()` / `intersection_ex()`.
|
||||
|
||||
The result covers the same area as the plain call. Without the safety offset
|
||||
the rings are the same. With it, each tile unites only the clip polygons near
|
||||
it, so a clip edge that the whole-layer union splits where it crosses a distant
|
||||
clip polygon stays whole, and a crossing with the subject can round 1 unit
|
||||
differently. The tiles' results are concatenated in tile order, so the order of
|
||||
the output `ExPolygons` differs from the plain call.
|
||||
|
||||
### Offsets
|
||||
|
||||
- Before offsetting, input vertices closer than
|
||||
|
||||
@@ -7478,7 +7478,7 @@ msgid "Update"
|
||||
msgstr "更新"
|
||||
|
||||
msgid "Assistant(HMS)"
|
||||
msgstr "助理（HMS）"
|
||||
msgstr "助手(HMS)"
|
||||
|
||||
#, c-format, boost-format
|
||||
msgid "Network plug-in v%s"
|
||||
|
||||
@@ -0,0 +1,3 @@
|
||||
<svg width="28" height="27" viewBox="0 0 28 27" fill="none" xmlns="http://www.w3.org/2000/svg">
|
||||
<path transform="matrix(0.9 0 0 0.9 1.4 1.35)" d="M11.9888 2.01601C12.8984 0.494662 15.1024 0.494662 16.012 2.01601L18.8677 6.79237C19.1958 7.34113 19.7339 7.73201 20.3572 7.87447L25.7821 9.11446C27.5101 9.50943 28.1913 11.6056 27.0254 12.9408L23.3652 17.1327C22.9449 17.6143 22.7394 18.2469 22.7964 18.8836L23.2936 24.4263C23.4519 26.1918 21.6687 27.4873 20.0386 26.7911L14.9209 24.6056C14.3329 24.3545 13.6679 24.3545 13.0799 24.6056L7.96209 26.7911C6.33196 27.4873 4.54887 26.1918 4.70722 24.4263L5.20434 18.8836C5.26145 18.2469 5.05595 17.6143 4.63544 17.1327L0.97533 12.9408C-0.19048 11.6056 0.490599 9.50943 2.21859 9.11446L7.64364 7.87447C8.2669 7.73201 8.80494 7.34113 9.13302 6.79237L11.9888 2.01601Z" stroke="#949494" stroke-width="2.4" stroke-linejoin="round"/>
|
||||
</svg>
|
||||
|
After Width: | Height: | Size: 876 B |
@@ -0,0 +1,790 @@
|
||||
{
|
||||
"name": "FELIX Printers",
|
||||
"version": "1.0.0",
|
||||
"force_update": "0",
|
||||
"description": "Configuration file for printers by FELIX Printers",
|
||||
"machine_model_list": [
|
||||
{
|
||||
"name": "FELIX Food Double",
|
||||
"sub_path": "machine/FELIX Food Double.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Food Single",
|
||||
"sub_path": "machine/FELIX Food Single.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Food Switch",
|
||||
"sub_path": "machine/FELIX Food Switch.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Pro 3",
|
||||
"sub_path": "machine/FELIX Pro 3.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Pro L 3.0",
|
||||
"sub_path": "machine/FELIX Pro L 3.0.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Pro XL 3.0",
|
||||
"sub_path": "machine/FELIX Pro XL 3.0.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Tec 4",
|
||||
"sub_path": "machine/FELIX Tec 4.json"
|
||||
}
|
||||
],
|
||||
"machine_list": [
|
||||
{
|
||||
"name": "fdm_all_machines_common",
|
||||
"sub_path": "machine/fdm_all_machines_common.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_felix_food_common",
|
||||
"sub_path": "machine/fdm_felix_food_common.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_felix_food_double_common",
|
||||
"sub_path": "machine/fdm_felix_food_double_common.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_felix_food_switch_common",
|
||||
"sub_path": "machine/fdm_felix_food_switch_common.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_felix_plastic_common",
|
||||
"sub_path": "machine/fdm_felix_plastic_common.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_felix_pro_3_common",
|
||||
"sub_path": "machine/fdm_felix_pro_3_common.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_felix_pro_l_3_common",
|
||||
"sub_path": "machine/fdm_felix_pro_l_3.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_felix_pro_xl_3_common",
|
||||
"sub_path": "machine/fdm_felix_pro_xl_3_common.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_felix_tec_common",
|
||||
"sub_path": "machine/fdm_felix_tec_common.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Food Single 0.50mm nozzle",
|
||||
"sub_path": "machine/FELIX Food Single 0.50mm nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Food Single 1.00mm nozzle",
|
||||
"sub_path": "machine/FELIX Food Single 1.00mm nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Food Single 2.00mm nozzle",
|
||||
"sub_path": "machine/FELIX Food Single 2.00mm nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Food Single 3.00mm nozzle",
|
||||
"sub_path": "machine/FELIX Food Single 3.00mm nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Food Single 4.00mm nozzle",
|
||||
"sub_path": "machine/FELIX Food Single 4.00mm nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Food Double 0.50mm nozzle",
|
||||
"sub_path": "machine/FELIX Food Double 0.50mm nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Food Double 1.00mm nozzle",
|
||||
"sub_path": "machine/FELIX Food Double 1.00mm nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Food Double 2.00mm nozzle",
|
||||
"sub_path": "machine/FELIX Food Double 2.00mm nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Food Double 3.00mm nozzle",
|
||||
"sub_path": "machine/FELIX Food Double 3.00mm nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Food Double 4.00mm nozzle",
|
||||
"sub_path": "machine/FELIX Food Double 4.00mm nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Food Switch 0.50mm nozzle",
|
||||
"sub_path": "machine/FELIX Food Switch 0.50mm nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Food Switch 1.00mm nozzle",
|
||||
"sub_path": "machine/FELIX Food Switch 1.00mm nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Food Switch 2.00mm nozzle",
|
||||
"sub_path": "machine/FELIX Food Switch 2.00mm nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Food Switch 3.00mm nozzle",
|
||||
"sub_path": "machine/FELIX Food Switch 3.00mm nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Food Switch 4.00mm nozzle",
|
||||
"sub_path": "machine/FELIX Food Switch 4.00mm nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Pro 3 0.25mm nozzle",
|
||||
"sub_path": "machine/FELIX Pro 3 0.25mm nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Pro 3 0.35mm nozzle",
|
||||
"sub_path": "machine/FELIX Pro 3 0.35mm nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Pro 3 0.50mm nozzle",
|
||||
"sub_path": "machine/FELIX Pro 3 0.50mm nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Pro 3 0.70mm nozzle",
|
||||
"sub_path": "machine/FELIX Pro 3 0.70mm nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Pro L 3.0 0.25mm nozzle",
|
||||
"sub_path": "machine/FELIX Pro L 3.0 0.25mm nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Pro L 3.0 0.35mm nozzle",
|
||||
"sub_path": "machine/FELIX Pro L 3.0 0.35mm nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Pro L 3.0 0.50mm nozzle",
|
||||
"sub_path": "machine/FELIX Pro L 3.0 0.50mm nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Pro L 3.0 0.70mm nozzle",
|
||||
"sub_path": "machine/FELIX Pro L 3.0 0.70mm nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Pro XL 3.0 0.25mm nozzle",
|
||||
"sub_path": "machine/FELIX Pro XL 3.0 0.25mm nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Pro XL 3.0 0.35mm nozzle",
|
||||
"sub_path": "machine/FELIX Pro XL 3.0 0.35mm nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Pro XL 3.0 0.50mm nozzle",
|
||||
"sub_path": "machine/FELIX Pro XL 3.0 0.50mm nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Pro XL 3.0 0.70mm nozzle",
|
||||
"sub_path": "machine/FELIX Pro XL 3.0 0.70mm nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Tec 4 0.25mm nozzle",
|
||||
"sub_path": "machine/FELIX Tec 4 0.25mm nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Tec 4 0.35mm nozzle",
|
||||
"sub_path": "machine/FELIX Tec 4 0.35mm nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Tec 4 0.50mm nozzle",
|
||||
"sub_path": "machine/FELIX Tec 4 0.50mm nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Tec 4 0.70mm nozzle",
|
||||
"sub_path": "machine/FELIX Tec 4 0.70mm nozzle.json"
|
||||
}
|
||||
],
|
||||
"process_list": [
|
||||
{
|
||||
"name": "fdm_process_common",
|
||||
"sub_path": "process/fdm_process_common.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_process_felix_food_common",
|
||||
"sub_path": "process/fdm_process_felix_food_common.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_process_felix_plastic_common",
|
||||
"sub_path": "process/fdm_process_felix_plastic_common.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Food Coarse @ 0.50mm",
|
||||
"sub_path": "process/FELIX Food Coarse @ 0.50mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Food Coarse @ 1.00mm",
|
||||
"sub_path": "process/FELIX Food Coarse @ 1.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Food Coarse @ 2.00mm",
|
||||
"sub_path": "process/FELIX Food Coarse @ 2.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Food Coarse @ 3.00mm",
|
||||
"sub_path": "process/FELIX Food Coarse @ 3.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Food Coarse @ 4.00mm",
|
||||
"sub_path": "process/FELIX Food Coarse @ 4.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Food Fine @ 0.50mm",
|
||||
"sub_path": "process/FELIX Food Fine @ 0.50mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Food Fine @ 1.00mm",
|
||||
"sub_path": "process/FELIX Food Fine @ 1.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Food Fine @ 2.00mm",
|
||||
"sub_path": "process/FELIX Food Fine @ 2.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Food Fine @ 3.00mm",
|
||||
"sub_path": "process/FELIX Food Fine @ 3.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Food Fine @ 4.00mm",
|
||||
"sub_path": "process/FELIX Food Fine @ 4.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Food Normal @ 0.50mm",
|
||||
"sub_path": "process/FELIX Food Normal @ 0.50mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Food Normal @ 1.00mm",
|
||||
"sub_path": "process/FELIX Food Normal @ 1.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Food Normal @ 2.00mm",
|
||||
"sub_path": "process/FELIX Food Normal @ 2.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Food Normal @ 3.00mm",
|
||||
"sub_path": "process/FELIX Food Normal @ 3.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Food Normal @ 4.00mm",
|
||||
"sub_path": "process/FELIX Food Normal @ 4.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Plastic Coarse @ 0.35mm",
|
||||
"sub_path": "process/FELIX Plastic Coarse @ 0.35mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Plastic Coarse @ 0.50mm",
|
||||
"sub_path": "process/FELIX Plastic Coarse @ 0.50mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Plastic Coarse @ 0.70mm",
|
||||
"sub_path": "process/FELIX Plastic Coarse @ 0.70mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Plastic Fine @ 0.25mm",
|
||||
"sub_path": "process/FELIX Plastic Fine @ 0.25mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Plastic Fine @ 0.35mm",
|
||||
"sub_path": "process/FELIX Plastic Fine @ 0.35mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Plastic Fine @ 0.50mm",
|
||||
"sub_path": "process/FELIX Plastic Fine @ 0.50mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Plastic Fine @ 0.70mm",
|
||||
"sub_path": "process/FELIX Plastic Fine @ 0.70mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Plastic Normal @ 0.25mm",
|
||||
"sub_path": "process/FELIX Plastic Normal @ 0.25mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Plastic Normal @ 0.35mm",
|
||||
"sub_path": "process/FELIX Plastic Normal @ 0.35mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Plastic Normal @ 0.50mm",
|
||||
"sub_path": "process/FELIX Plastic Normal @ 0.50mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Plastic Normal @ 0.70mm",
|
||||
"sub_path": "process/FELIX Plastic Normal @ 0.70mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Plastic Slightly Coarse @ 0.35mm",
|
||||
"sub_path": "process/FELIX Plastic Slightly Coarse @ 0.35mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Plastic Slightly Coarse @ 0.50mm",
|
||||
"sub_path": "process/FELIX Plastic Slightly Coarse @ 0.50mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Plastic Slightly Coarse @ 0.70mm",
|
||||
"sub_path": "process/FELIX Plastic Slightly Coarse @ 0.70mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Plastic Super Coarse @ 0.70mm",
|
||||
"sub_path": "process/FELIX Plastic Super Coarse @ 0.70mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Plastic Super Fine @ 0.25mm",
|
||||
"sub_path": "process/FELIX Plastic Super Fine @ 0.25mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Plastic Super Fine @ 0.35mm",
|
||||
"sub_path": "process/FELIX Plastic Super Fine @ 0.35mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Plastic Very Coarse @ 0.50mm",
|
||||
"sub_path": "process/FELIX Plastic Very Coarse @ 0.50mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Plastic Very Coarse @ 0.70mm",
|
||||
"sub_path": "process/FELIX Plastic Very Coarse @ 0.70mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Plastic Very Fine @ 0.25mm",
|
||||
"sub_path": "process/FELIX Plastic Very Fine @ 0.25mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Plastic Very Fine @ 0.35mm",
|
||||
"sub_path": "process/FELIX Plastic Very Fine @ 0.35mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Plastic Very Fine @ 0.50mm",
|
||||
"sub_path": "process/FELIX Plastic Very Fine @ 0.50mm.json"
|
||||
}
|
||||
],
|
||||
"filament_list": [
|
||||
{
|
||||
"name": "fdm_filament_common",
|
||||
"sub_path": "filament/fdm_filament_common.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_filament_food",
|
||||
"sub_path": "filament/fdm_filament_food.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_filament_abs",
|
||||
"sub_path": "filament/fdm_filament_abs.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_filament_asa",
|
||||
"sub_path": "filament/fdm_filament_asa.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_filament_flex",
|
||||
"sub_path": "filament/fdm_filament_flex.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_filament_pa",
|
||||
"sub_path": "filament/fdm_filament_pa.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_filament_pa11cf",
|
||||
"sub_path": "filament/fdm_filament_pa11cf.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_filament_pc",
|
||||
"sub_path": "filament/fdm_filament_pc.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_filament_pccf",
|
||||
"sub_path": "filament/fdm_filament_pccf.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_filament_pet",
|
||||
"sub_path": "filament/fdm_filament_pet.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_filament_pla",
|
||||
"sub_path": "filament/fdm_filament_pla.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_filament_pva",
|
||||
"sub_path": "filament/fdm_filament_pva.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_filament_pvb",
|
||||
"sub_path": "filament/fdm_filament_pvb.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_filament_tpu",
|
||||
"sub_path": "filament/fdm_filament_tpu.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Medium Plastic Syringe @0.50mm",
|
||||
"sub_path": "filament/FELIXFood/Food Medium Plastic Syringe @0.50mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Medium Plastic Syringe @1.00mm",
|
||||
"sub_path": "filament/FELIXFood/Food Medium Plastic Syringe @1.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Medium Plastic Syringe @2.00mm",
|
||||
"sub_path": "filament/FELIXFood/Food Medium Plastic Syringe @2.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Medium Plastic Syringe @3.00mm",
|
||||
"sub_path": "filament/FELIXFood/Food Medium Plastic Syringe @3.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Medium Plastic Syringe @4.00mm",
|
||||
"sub_path": "filament/FELIXFood/Food Medium Plastic Syringe @4.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Medium Stainless Steel Syringe @0.50mm",
|
||||
"sub_path": "filament/FELIXFood/Food Medium Stainless Steel Syringe @0.50mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Medium Stainless Steel Syringe @1.00mm",
|
||||
"sub_path": "filament/FELIXFood/Food Medium Stainless Steel Syringe @1.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Medium Stainless Steel Syringe @2.00mm",
|
||||
"sub_path": "filament/FELIXFood/Food Medium Stainless Steel Syringe @2.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Medium Stainless Steel Syringe @3.00mm",
|
||||
"sub_path": "filament/FELIXFood/Food Medium Stainless Steel Syringe @3.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Medium Stainless Steel Syringe @4.00mm",
|
||||
"sub_path": "filament/FELIXFood/Food Medium Stainless Steel Syringe @4.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Thick Stainless Steel Syringe @0.50mm",
|
||||
"sub_path": "filament/FELIXFood/Food Thick Stainless Steel Syringe @0.50mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Thick Stainless Steel Syringe @1.00mm",
|
||||
"sub_path": "filament/FELIXFood/Food Thick Stainless Steel Syringe @1.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Thick Stainless Steel Syringe @2.00mm",
|
||||
"sub_path": "filament/FELIXFood/Food Thick Stainless Steel Syringe @2.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Thick Stainless Steel Syringe @3.00mm",
|
||||
"sub_path": "filament/FELIXFood/Food Thick Stainless Steel Syringe @3.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Thick Stainless Steel Syringe @4.00mm",
|
||||
"sub_path": "filament/FELIXFood/Food Thick Stainless Steel Syringe @4.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Thin Plastic Syringe @0.50mm",
|
||||
"sub_path": "filament/FELIXFood/Food Thin Plastic Syringe @0.50mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Thin Plastic Syringe @1.00mm",
|
||||
"sub_path": "filament/FELIXFood/Food Thin Plastic Syringe @1.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Thin Plastic Syringe @2.00mm",
|
||||
"sub_path": "filament/FELIXFood/Food Thin Plastic Syringe @2.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Thin Plastic Syringe @3.00mm",
|
||||
"sub_path": "filament/FELIXFood/Food Thin Plastic Syringe @3.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Thin Plastic Syringe @4.00mm",
|
||||
"sub_path": "filament/FELIXFood/Food Thin Plastic Syringe @4.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Thin Stainless Steel Syringe @0.50mm",
|
||||
"sub_path": "filament/FELIXFood/Food Thin Stainless Steel Syringe @0.50mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Thin Stainless Steel Syringe @1.00mm",
|
||||
"sub_path": "filament/FELIXFood/Food Thin Stainless Steel Syringe @1.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Thin Stainless Steel Syringe @2.00mm",
|
||||
"sub_path": "filament/FELIXFood/Food Thin Stainless Steel Syringe @2.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Thin Stainless Steel Syringe @3.00mm",
|
||||
"sub_path": "filament/FELIXFood/Food Thin Stainless Steel Syringe @3.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Thin Stainless Steel Syringe @4.00mm",
|
||||
"sub_path": "filament/FELIXFood/Food Thin Stainless Steel Syringe @4.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Very Thick Stainless Steel Syringe @1.00mm",
|
||||
"sub_path": "filament/FELIXFood/Food Very Thick Stainless Steel Syringe @1.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Very Thick Stainless Steel Syringe @2.00mm",
|
||||
"sub_path": "filament/FELIXFood/Food Very Thick Stainless Steel Syringe @2.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Very Thick Stainless Steel Syringe @3.00mm",
|
||||
"sub_path": "filament/FELIXFood/Food Very Thick Stainless Steel Syringe @3.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Very Thick Stainless Steel Syringe @4.00mm",
|
||||
"sub_path": "filament/FELIXFood/Food Very Thick Stainless Steel Syringe @4.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Very Thin Plastic Syringe @0.50mm",
|
||||
"sub_path": "filament/FELIXFood/Food Very Thin Plastic Syringe @0.50mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Very Thin Plastic Syringe @1.00mm",
|
||||
"sub_path": "filament/FELIXFood/Food Very Thin Plastic Syringe @1.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Very Thin Plastic Syringe @2.00mm",
|
||||
"sub_path": "filament/FELIXFood/Food Very Thin Plastic Syringe @2.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Very Thin Plastic Syringe @3.00mm",
|
||||
"sub_path": "filament/FELIXFood/Food Very Thin Plastic Syringe @3.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Very Thin Plastic Syringe @4.00mm",
|
||||
"sub_path": "filament/FELIXFood/Food Very Thin Plastic Syringe @4.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Very Thin Stainless Steel Syringe @1.00mm",
|
||||
"sub_path": "filament/FELIXFood/Food Very Thin Stainless Steel Syringe @1.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Very Thin Stainless Steel Syringe @2.00mm",
|
||||
"sub_path": "filament/FELIXFood/Food Very Thin Stainless Steel Syringe @2.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Very Thin Stainless Steel Syringe @3.00mm",
|
||||
"sub_path": "filament/FELIXFood/Food Very Thin Stainless Steel Syringe @3.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Very Thin Stainless Steel Syringe @4.00mm",
|
||||
"sub_path": "filament/FELIXFood/Food Very Thin Stainless Steel Syringe @4.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Very Thin Stainless Steel Syringe @0.50mm",
|
||||
"sub_path": "filament/FELIXFood/Food Very Thin Stainless Steel Syringe @0.50mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FORMFUTURA TitanX ABS Brass @ 0.35mm",
|
||||
"sub_path": "filament/FELIXPlastic/FORMFUTURA TitanX ABS Brass @ 0.35mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FORMFUTURA TitanX ABS Brass @ 0.50mm",
|
||||
"sub_path": "filament/FELIXPlastic/FORMFUTURA TitanX ABS Brass @ 0.50mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FORMFUTURA TitanX ABS Hardened Steel @ 0.25mm",
|
||||
"sub_path": "filament/FELIXPlastic/FORMFUTURA TitanX ABS Hardened Steel @ 0.25mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FORMFUTURA TitanX ABS Hardened Steel @ 0.35mm",
|
||||
"sub_path": "filament/FELIXPlastic/FORMFUTURA TitanX ABS Hardened Steel @ 0.35mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FORMFUTURA TitanX ABS Hardened Steel @ 0.50mm",
|
||||
"sub_path": "filament/FELIXPlastic/FORMFUTURA TitanX ABS Hardened Steel @ 0.50mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FORMFUTURA TitanX ABS Hardened Steel @ 0.70mm",
|
||||
"sub_path": "filament/FELIXPlastic/FORMFUTURA TitanX ABS Hardened Steel @ 0.70mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Ultrafuse ABS Fusion+ Brass @ 0.35mm",
|
||||
"sub_path": "filament/FELIXPlastic/Ultrafuse ABS Fusion+ Brass @ 0.35mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Ultrafuse ABS Fusion+ Brass @ 0.50mm",
|
||||
"sub_path": "filament/FELIXPlastic/Ultrafuse ABS Fusion+ Brass @ 0.50mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Ultrafuse ABS Fusion+ Hardened Steel @ 0.25mm",
|
||||
"sub_path": "filament/FELIXPlastic/Ultrafuse ABS Fusion+ Hardened Steel @ 0.25mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Ultrafuse ABS Fusion+ Hardened Steel @ 0.35mm",
|
||||
"sub_path": "filament/FELIXPlastic/Ultrafuse ABS Fusion+ Hardened Steel @ 0.35mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Ultrafuse ABS Fusion+ Hardened Steel @ 0.50mm",
|
||||
"sub_path": "filament/FELIXPlastic/Ultrafuse ABS Fusion+ Hardened Steel @ 0.50mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Ultrafuse ABS Fusion+ Hardened Steel @ 0.70mm",
|
||||
"sub_path": "filament/FELIXPlastic/Ultrafuse ABS Fusion+ Hardened Steel @ 0.70mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FORMFUTURA AppoloX ASA Brass @ 0.35mm",
|
||||
"sub_path": "filament/FELIXPlastic/FORMFUTURA AppoloX ASA Brass @ 0.35mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FORMFUTURA AppoloX ASA Brass @ 0.50mm",
|
||||
"sub_path": "filament/FELIXPlastic/FORMFUTURA AppoloX ASA Brass @ 0.50mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FORMFUTURA AppoloX ASA Hardened Steel @ 0.25mm",
|
||||
"sub_path": "filament/FELIXPlastic/FORMFUTURA AppoloX ASA Hardened Steel @ 0.25mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FORMFUTURA AppoloX ASA Hardened Steel @ 0.35mm",
|
||||
"sub_path": "filament/FELIXPlastic/FORMFUTURA AppoloX ASA Hardened Steel @ 0.35mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FORMFUTURA AppoloX ASA Hardened Steel @ 0.50mm",
|
||||
"sub_path": "filament/FELIXPlastic/FORMFUTURA AppoloX ASA Hardened Steel @ 0.50mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FORMFUTURA AppoloX ASA Hardened Steel @ 0.70mm",
|
||||
"sub_path": "filament/FELIXPlastic/FORMFUTURA AppoloX ASA Hardened Steel @ 0.70mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX FLEX Brass @ 0.35mm",
|
||||
"sub_path": "filament/FELIXPlastic/FELIX FLEX Brass @ 0.35mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX FLEX Brass @ 0.50mm",
|
||||
"sub_path": "filament/FELIXPlastic/FELIX FLEX Brass @ 0.50mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX FLEX Hardened Steel @ 0.25mm",
|
||||
"sub_path": "filament/FELIXPlastic/FELIX FLEX Hardened Steel @ 0.25mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX FLEX Hardened Steel @ 0.35mm",
|
||||
"sub_path": "filament/FELIXPlastic/FELIX FLEX Hardened Steel @ 0.35mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX FLEX Hardened Steel @ 0.50mm",
|
||||
"sub_path": "filament/FELIXPlastic/FELIX FLEX Hardened Steel @ 0.50mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX FLEX Hardened Steel @ 0.70mm",
|
||||
"sub_path": "filament/FELIXPlastic/FELIX FLEX Hardened Steel @ 0.70mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX PETG Brass @ 0.35mm",
|
||||
"sub_path": "filament/FELIXPlastic/FELIX PETG Brass @ 0.35mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX PETG Brass @ 0.50mm",
|
||||
"sub_path": "filament/FELIXPlastic/FELIX PETG Brass @ 0.50mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX PETG Hardened Steel @ 0.25mm",
|
||||
"sub_path": "filament/FELIXPlastic/FELIX PETG Hardened Steel @ 0.25mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX PETG Hardened Steel @ 0.35mm",
|
||||
"sub_path": "filament/FELIXPlastic/FELIX PETG Hardened Steel @ 0.35mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX PETG Hardened Steel @ 0.50mm",
|
||||
"sub_path": "filament/FELIXPlastic/FELIX PETG Hardened Steel @ 0.50mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX PETG Hardened Steel @ 0.70mm",
|
||||
"sub_path": "filament/FELIXPlastic/FELIX PETG Hardened Steel @ 0.70mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Premium PLA Brass @ 0.35mm",
|
||||
"sub_path": "filament/FELIXPlastic/FELIX Premium PLA Brass @ 0.35mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Premium PLA Brass @ 0.50mm",
|
||||
"sub_path": "filament/FELIXPlastic/FELIX Premium PLA Brass @ 0.50mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Premium PLA Hardened Steel @ 0.25mm",
|
||||
"sub_path": "filament/FELIXPlastic/FELIX Premium PLA Hardened Steel @ 0.25mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Premium PLA Hardened Steel @ 0.35mm",
|
||||
"sub_path": "filament/FELIXPlastic/FELIX Premium PLA Hardened Steel @ 0.35mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Premium PLA Hardened Steel @ 0.50mm",
|
||||
"sub_path": "filament/FELIXPlastic/FELIX Premium PLA Hardened Steel @ 0.50mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Premium PLA Hardened Steel @ 0.70mm",
|
||||
"sub_path": "filament/FELIXPlastic/FELIX Premium PLA Hardened Steel @ 0.70mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Wood Brass @ 0.35mm",
|
||||
"sub_path": "filament/FELIXPlastic/FELIX Wood Brass @ 0.35mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Wood Brass @ 0.50mm",
|
||||
"sub_path": "filament/FELIXPlastic/FELIX Wood Brass @ 0.50mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Wood Hardened Steel @ 0.25mm",
|
||||
"sub_path": "filament/FELIXPlastic/FELIX Wood Hardened Steel @ 0.25mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Wood Hardened Steel @ 0.35mm",
|
||||
"sub_path": "filament/FELIXPlastic/FELIX Wood Hardened Steel @ 0.35mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Wood Hardened Steel @ 0.50mm",
|
||||
"sub_path": "filament/FELIXPlastic/FELIX Wood Hardened Steel @ 0.50mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Wood Hardened Steel @ 0.70mm",
|
||||
"sub_path": "filament/FELIXPlastic/FELIX Wood Hardened Steel @ 0.70mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FORMFUTURA ePLA Brass @ 0.35mm",
|
||||
"sub_path": "filament/FELIXPlastic/FORMFUTURA ePLA Brass @ 0.35mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FORMFUTURA ePLA Brass @ 0.50mm",
|
||||
"sub_path": "filament/FELIXPlastic/FORMFUTURA ePLA Brass @ 0.50mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FORMFUTURA ePLA Hardened Steel @ 0.25mm",
|
||||
"sub_path": "filament/FELIXPlastic/FORMFUTURA ePLA Hardened Steel @ 0.25mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FORMFUTURA ePLA Hardened Steel @ 0.35mm",
|
||||
"sub_path": "filament/FELIXPlastic/FORMFUTURA ePLA Hardened Steel @ 0.35mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FORMFUTURA ePLA Hardened Steel @ 0.50mm",
|
||||
"sub_path": "filament/FELIXPlastic/FORMFUTURA ePLA Hardened Steel @ 0.50mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FORMFUTURA ePLA Hardened Steel @ 0.70mm",
|
||||
"sub_path": "filament/FELIXPlastic/FORMFUTURA ePLA Hardened Steel @ 0.70mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FORMFUTURA Aquasolve PVA Brass @ 0.35mm",
|
||||
"sub_path": "filament/FELIXPlastic/FORMFUTURA Aquasolve PVA Brass @ 0.35mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FORMFUTURA Aquasolve PVA Brass @ 0.50mm",
|
||||
"sub_path": "filament/FELIXPlastic/FORMFUTURA Aquasolve PVA Brass @ 0.50mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FORMFUTURA Aquasolve PVA Hardened Steel @ 0.25mm",
|
||||
"sub_path": "filament/FELIXPlastic/FORMFUTURA Aquasolve PVA Hardened Steel @ 0.25mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FORMFUTURA Aquasolve PVA Hardened Steel @ 0.35mm",
|
||||
"sub_path": "filament/FELIXPlastic/FORMFUTURA Aquasolve PVA Hardened Steel @ 0.35mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FORMFUTURA Aquasolve PVA Hardened Steel @ 0.50mm",
|
||||
"sub_path": "filament/FELIXPlastic/FORMFUTURA Aquasolve PVA Hardened Steel @ 0.50mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FORMFUTURA Aquasolve PVA Hardened Steel @ 0.70mm",
|
||||
"sub_path": "filament/FELIXPlastic/FORMFUTURA Aquasolve PVA Hardened Steel @ 0.70mm.json"
|
||||
}
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,28 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<svg id="a" xmlns="http://www.w3.org/2000/svg" width="180.62mm" height="180.62mm" viewBox="0 0 512 512" xmlns:c2pa="http://c2pa.org/manifest">
|
||||
<rect x="0" y="0" width="512" height="512" fill="none"/>
|
||||
<g fill="#ffffff" transform="translate(5,460) scale(0.2)">
|
||||
<g>
|
||||
<path d="M139.4.8l-.2,62c-34.3,0-63.4,21.8-73.2,51.9C26.4,141,.2,187.8.2,241.3H0l.2-101.3C.2,63.1,62.4.8,139.4.8Z"/>
|
||||
<path d="M139.1,92.5l-.8,62.5c-42.6,0-77.1,38.6-77.1,86.3l1-103.9c0-7.9,1.3-15.5,3.6-22.7,21.2-14.1,46.3-22.3,73.2-22.3Z"/>
|
||||
<path d="M65.9,114.7c-2.3,7.2-3.6,14.8-3.6,22.7l-1,103.9H.2c0-53.5,26.3-100.3,65.7-126.6Z"/>
|
||||
</g>
|
||||
<polygon points="202.8 .4 202.8 92.9 226.2 92.9 226.2 56 259.8 56 259.8 36.1 226.2 36.1 226.2 19.4 265.7 19.4 265.7 0 202.8 .4"/>
|
||||
<polygon points="282.3 -.3 282.3 93 346.1 93 346.1 72.4 306.8 72.4 306.8 55.6 341.7 55.6 341.7 36.4 306.5 36.4 306.5 19.6 346.2 19.6 346.2 -.3 282.3 -.3"/>
|
||||
<polygon points="365.9 92.8 429.5 92.8 429.5 70.9 389.6 70.9 389.6 .2 365 .2 365.9 92.8"/>
|
||||
<polygon points="448 0 471.9 0 471.9 92.5 447.5 92.5 448 0"/>
|
||||
<path d="M485.1,92.5s34.7-44.3,33.4-46.5S485.7,0,485.7,0h29l18.4,24.8L550.1,0h26.6l-29.9,45.4,33.1,46.8h-28.8l-19.3-27.4-18.9,28.1-27.9-.4Z"/>
|
||||
<g>
|
||||
<path d="M210.9,154.1c-1.9,0-3.7-.2-5.3-.7-1.6-.4-3-1-4.2-1.6v-3.9c1.1.6,2.4,1.1,3.9,1.6,1.5.5,3.2.7,5.1.7,3.1,0,5.5-.6,7.2-1.7,1.7-1.2,2.5-2.8,2.5-5s-.8-3.9-2.5-5c-1.7-1.2-4.2-1.7-7.4-1.7h-3.9v-3.7h4c2.6,0,4.5-.5,5.9-1.5,1.4-1,2-2.4,2-4.2s-.3-2.3-1-3.1c-.6-.8-1.6-1.5-2.8-1.9-1.3-.4-2.8-.7-4.6-.7s-3,.2-4.3.6c-1.3.4-2.4.8-3.3,1.3v-3.9c1.1-.5,2.3-.9,3.6-1.3,1.3-.4,2.8-.5,4.5-.5s4,.3,5.5.8c1.5.5,2.7,1.3,3.6,2.2.9.9,1.6,1.9,2,3.1.4,1.1.6,2.3.6,3.4s-.2,2.4-.7,3.3c-.5.9-1,1.7-1.6,2.2-.6.6-1.4,1.1-2.3,1.6,1.3.7,2.3,1.4,3.2,2.1s1.6,1.7,2.2,2.8c.6,1.1,1,2.5,1,4.2s-.2,2.5-.7,3.8c-.5,1.2-1.2,2.4-2.2,3.4s-2.4,1.8-4,2.4c-1.7.6-3.7.9-6.1.9Z"/>
|
||||
<path d="M232.1,153.7v-35.4h11.1c5.5,0,9.7,1.5,12.4,4.4,2.8,3,4.2,7.4,4.2,13.2s-1.4,10.3-4.2,13.2c-2.8,3-6.9,4.5-12.4,4.5h-11.1ZM235.9,150h7c4.5,0,7.8-1.1,9.9-3.4,2-2.3,3.1-5.8,3.1-10.7s-1-8.4-3.1-10.7c-2-2.3-5.3-3.4-9.9-3.4h-7v28.2Z"/>
|
||||
<path d="M291.9,154.4c-.8,0-1.7-.1-2.6-.3-1-.2-1.9-.5-2.8-.8-.9-.3-1.7-.7-2.4-1l1.3-1.3v14.2h-3.8v-33.2c0-1.1.3-2,1-2.7.7-.7,1.6-1.2,2.7-1.6,1.1-.4,2.3-.6,3.5-.8,1.2-.2,2.4-.2,3.5-.2,2.1,0,4.1.4,6,1.3,1.9.9,3.4,2.4,4.6,4.5s1.7,5,1.7,8.6-.5,5.1-1.5,7.1c-1,2-2.4,3.5-4.3,4.6-1.9,1.1-4.2,1.6-6.9,1.6ZM291.9,150.9c1.9,0,3.5-.4,4.8-1.2,1.3-.8,2.2-2,2.8-3.5.6-1.5,1-3.2,1-5.1s-.2-3.7-.6-5.4c-.4-1.7-1.2-3-2.4-4-1.2-1-3-1.5-5.2-1.5s-3.4.2-4.8.6c-1.4.4-2,1-2,1.8v16.4c1.1.6,2.2,1.1,3.3,1.4s2.2.5,3.3.5Z"/>
|
||||
<path d="M311.1,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1c-.8,0-1.6.2-2.4.3-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
|
||||
<path d="M330.5,122.5v-4.2h4.2v4.2h-4.2ZM330.8,153.7v-26.4h3.8v26.4h-3.8Z"/>
|
||||
<path d="M342.7,129.3c.8-.4,1.7-.8,2.6-1.1.9-.3,1.8-.6,2.8-.8.9-.2,1.9-.4,2.9-.5,1-.1,2-.2,2.9-.2,2.6,0,4.6.4,6.1,1.1,1.5.8,2.6,1.9,3.3,3.3.7,1.4,1,3.2,1,5.2v17.2h-3.8v-17.2c0-.6,0-1.3-.2-2-.2-.7-.5-1.4-.9-2-.5-.7-1.2-1.2-2.1-1.6s-2.2-.6-3.8-.6-2.2,0-3.4.3-2.4.4-3.6.8v22.4h-3.8v-24.3Z"/>
|
||||
<path d="M380.7,154.1c-1.9,0-3.4-.6-4.7-1.7-1.3-1.1-1.9-2.9-1.9-5.1v-16.5h-4.6v-3.5h4.6v-7.5h3.8v7.5h6.8v3.5h-6.8v15.3c0,1.5.2,2.6.7,3.3s1.4,1.1,2.8,1.1,1.3,0,1.9-.2,1.1-.3,1.5-.5v3.6c-.5.2-1.1.3-1.9.5s-1.5.2-2.1.2Z"/>
|
||||
<path d="M402,154.4c-2.5,0-4.7-.5-6.5-1.6-1.8-1-3.3-2.6-4.2-4.7-1-2.1-1.5-4.7-1.5-7.8,0-4.6,1-8,3.1-10.3,2.1-2.3,4.9-3.4,8.5-3.4s5.1.6,6.8,1.9c1.7,1.3,2.9,3,3.7,5.1.7,2.2,1.1,4.6,1.1,7.3h-21.3l.3-3.5h18.5l-1.5.5c-.1-2.6-.8-4.6-2-5.9-1.2-1.3-3.1-2-5.6-2s-3.2.3-4.3,1c-1.1.6-2,1.7-2.6,3.3s-.8,3.8-.8,6.6.8,5.7,2.3,7.3c1.5,1.7,3.6,2.5,6.3,2.5s2.5,0,3.6-.3,2.1-.5,3-.8c.9-.4,1.7-.7,2.4-1.2v3.9c-1.3.6-2.7,1.1-4.2,1.4-1.5.3-3.2.5-5.1.5Z"/>
|
||||
<path d="M419.5,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1-1.6.2-2.4.3c-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
|
||||
<path d="M446.4,154.4c-1.9,0-3.5-.2-4.8-.6s-2.6-.9-4-1.6v-4c1.1.6,2.1,1.1,2.9,1.5s1.7.7,2.6.9c.9.2,1.9.3,3,.3,1.8,0,3.2-.4,4.3-1.2,1.1-.8,1.7-1.8,1.7-3s-.3-1.7-.8-2.3-1.2-1-2.1-1.3c-.8-.4-1.7-.7-2.7-1.1-1-.3-2.1-.6-3.1-.9-1-.3-2-.8-2.9-1.3-.9-.5-1.6-1.3-2.1-2.1-.5-.9-.8-2-.8-3.4s.3-2.5.8-3.4c.5-1,1.3-1.7,2.1-2.4.9-.6,1.9-1.1,3-1.4,1.1-.3,2.2-.4,3.3-.4,1.6,0,2.9.2,4.1.6,1.1.4,2.3.9,3.5,1.4v3.8c-1.3-.7-2.5-1.3-3.6-1.7-1.1-.4-2.3-.7-3.8-.7s-2.7.3-3.9.9c-1.1.6-1.7,1.5-1.7,2.7s.3,1.8.9,2.4,1.4,1,2.3,1.4c1,.3,2,.7,3.1,1,.9.3,1.8.6,2.8.9,1,.3,1.8.8,2.7,1.3.8.5,1.5,1.3,2,2.1.5.9.8,2,.8,3.4s-.5,3.4-1.4,4.6-2.2,2.1-3.6,2.7c-1.5.6-3,.8-4.5.8Z"/>
|
||||
</g>
|
||||
</g>
|
||||
</svg>
|
||||
|
After Width: | Height: | Size: 4.7 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 808 KiB |
Binary file not shown.
@@ -0,0 +1,28 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<svg id="a" xmlns="http://www.w3.org/2000/svg" width="180.62mm" height="180.62mm" viewBox="0 0 250 195" xmlns:c2pa="http://c2pa.org/manifest">
|
||||
<rect x="0" y="0" width="250" height="195" fill="none"/>
|
||||
<g fill="#ffffff" transform="translate(2,169) scale(0.1)">
|
||||
<g>
|
||||
<path d="M139.4.8l-.2,62c-34.3,0-63.4,21.8-73.2,51.9C26.4,141,.2,187.8.2,241.3H0l.2-101.3C.2,63.1,62.4.8,139.4.8Z"/>
|
||||
<path d="M139.1,92.5l-.8,62.5c-42.6,0-77.1,38.6-77.1,86.3l1-103.9c0-7.9,1.3-15.5,3.6-22.7,21.2-14.1,46.3-22.3,73.2-22.3Z"/>
|
||||
<path d="M65.9,114.7c-2.3,7.2-3.6,14.8-3.6,22.7l-1,103.9H.2c0-53.5,26.3-100.3,65.7-126.6Z"/>
|
||||
</g>
|
||||
<polygon points="202.8 .4 202.8 92.9 226.2 92.9 226.2 56 259.8 56 259.8 36.1 226.2 36.1 226.2 19.4 265.7 19.4 265.7 0 202.8 .4"/>
|
||||
<polygon points="282.3 -.3 282.3 93 346.1 93 346.1 72.4 306.8 72.4 306.8 55.6 341.7 55.6 341.7 36.4 306.5 36.4 306.5 19.6 346.2 19.6 346.2 -.3 282.3 -.3"/>
|
||||
<polygon points="365.9 92.8 429.5 92.8 429.5 70.9 389.6 70.9 389.6 .2 365 .2 365.9 92.8"/>
|
||||
<polygon points="448 0 471.9 0 471.9 92.5 447.5 92.5 448 0"/>
|
||||
<path d="M485.1,92.5s34.7-44.3,33.4-46.5S485.7,0,485.7,0h29l18.4,24.8L550.1,0h26.6l-29.9,45.4,33.1,46.8h-28.8l-19.3-27.4-18.9,28.1-27.9-.4Z"/>
|
||||
<g>
|
||||
<path d="M210.9,154.1c-1.9,0-3.7-.2-5.3-.7-1.6-.4-3-1-4.2-1.6v-3.9c1.1.6,2.4,1.1,3.9,1.6,1.5.5,3.2.7,5.1.7,3.1,0,5.5-.6,7.2-1.7,1.7-1.2,2.5-2.8,2.5-5s-.8-3.9-2.5-5c-1.7-1.2-4.2-1.7-7.4-1.7h-3.9v-3.7h4c2.6,0,4.5-.5,5.9-1.5,1.4-1,2-2.4,2-4.2s-.3-2.3-1-3.1c-.6-.8-1.6-1.5-2.8-1.9-1.3-.4-2.8-.7-4.6-.7s-3,.2-4.3.6c-1.3.4-2.4.8-3.3,1.3v-3.9c1.1-.5,2.3-.9,3.6-1.3,1.3-.4,2.8-.5,4.5-.5s4,.3,5.5.8c1.5.5,2.7,1.3,3.6,2.2.9.9,1.6,1.9,2,3.1.4,1.1.6,2.3.6,3.4s-.2,2.4-.7,3.3c-.5.9-1,1.7-1.6,2.2-.6.6-1.4,1.1-2.3,1.6,1.3.7,2.3,1.4,3.2,2.1s1.6,1.7,2.2,2.8c.6,1.1,1,2.5,1,4.2s-.2,2.5-.7,3.8c-.5,1.2-1.2,2.4-2.2,3.4s-2.4,1.8-4,2.4c-1.7.6-3.7.9-6.1.9Z"/>
|
||||
<path d="M232.1,153.7v-35.4h11.1c5.5,0,9.7,1.5,12.4,4.4,2.8,3,4.2,7.4,4.2,13.2s-1.4,10.3-4.2,13.2c-2.8,3-6.9,4.5-12.4,4.5h-11.1ZM235.9,150h7c4.5,0,7.8-1.1,9.9-3.4,2-2.3,3.1-5.8,3.1-10.7s-1-8.4-3.1-10.7c-2-2.3-5.3-3.4-9.9-3.4h-7v28.2Z"/>
|
||||
<path d="M291.9,154.4c-.8,0-1.7-.1-2.6-.3-1-.2-1.9-.5-2.8-.8-.9-.3-1.7-.7-2.4-1l1.3-1.3v14.2h-3.8v-33.2c0-1.1.3-2,1-2.7.7-.7,1.6-1.2,2.7-1.6,1.1-.4,2.3-.6,3.5-.8,1.2-.2,2.4-.2,3.5-.2,2.1,0,4.1.4,6,1.3,1.9.9,3.4,2.4,4.6,4.5s1.7,5,1.7,8.6-.5,5.1-1.5,7.1c-1,2-2.4,3.5-4.3,4.6-1.9,1.1-4.2,1.6-6.9,1.6ZM291.9,150.9c1.9,0,3.5-.4,4.8-1.2,1.3-.8,2.2-2,2.8-3.5.6-1.5,1-3.2,1-5.1s-.2-3.7-.6-5.4c-.4-1.7-1.2-3-2.4-4-1.2-1-3-1.5-5.2-1.5s-3.4.2-4.8.6c-1.4.4-2,1-2,1.8v16.4c1.1.6,2.2,1.1,3.3,1.4s2.2.5,3.3.5Z"/>
|
||||
<path d="M311.1,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1c-.8,0-1.6.2-2.4.3-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
|
||||
<path d="M330.5,122.5v-4.2h4.2v4.2h-4.2ZM330.8,153.7v-26.4h3.8v26.4h-3.8Z"/>
|
||||
<path d="M342.7,129.3c.8-.4,1.7-.8,2.6-1.1.9-.3,1.8-.6,2.8-.8.9-.2,1.9-.4,2.9-.5,1-.1,2-.2,2.9-.2,2.6,0,4.6.4,6.1,1.1,1.5.8,2.6,1.9,3.3,3.3.7,1.4,1,3.2,1,5.2v17.2h-3.8v-17.2c0-.6,0-1.3-.2-2-.2-.7-.5-1.4-.9-2-.5-.7-1.2-1.2-2.1-1.6s-2.2-.6-3.8-.6-2.2,0-3.4.3-2.4.4-3.6.8v22.4h-3.8v-24.3Z"/>
|
||||
<path d="M380.7,154.1c-1.9,0-3.4-.6-4.7-1.7-1.3-1.1-1.9-2.9-1.9-5.1v-16.5h-4.6v-3.5h4.6v-7.5h3.8v7.5h6.8v3.5h-6.8v15.3c0,1.5.2,2.6.7,3.3s1.4,1.1,2.8,1.1,1.3,0,1.9-.2,1.1-.3,1.5-.5v3.6c-.5.2-1.1.3-1.9.5s-1.5.2-2.1.2Z"/>
|
||||
<path d="M402,154.4c-2.5,0-4.7-.5-6.5-1.6-1.8-1-3.3-2.6-4.2-4.7-1-2.1-1.5-4.7-1.5-7.8,0-4.6,1-8,3.1-10.3,2.1-2.3,4.9-3.4,8.5-3.4s5.1.6,6.8,1.9c1.7,1.3,2.9,3,3.7,5.1.7,2.2,1.1,4.6,1.1,7.3h-21.3l.3-3.5h18.5l-1.5.5c-.1-2.6-.8-4.6-2-5.9-1.2-1.3-3.1-2-5.6-2s-3.2.3-4.3,1c-1.1.6-2,1.7-2.6,3.3s-.8,3.8-.8,6.6.8,5.7,2.3,7.3c1.5,1.7,3.6,2.5,6.3,2.5s2.5,0,3.6-.3,2.1-.5,3-.8c.9-.4,1.7-.7,2.4-1.2v3.9c-1.3.6-2.7,1.1-4.2,1.4-1.5.3-3.2.5-5.1.5Z"/>
|
||||
<path d="M419.5,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1-1.6.2-2.4.3c-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
|
||||
<path d="M446.4,154.4c-1.9,0-3.5-.2-4.8-.6s-2.6-.9-4-1.6v-4c1.1.6,2.1,1.1,2.9,1.5s1.7.7,2.6.9c.9.2,1.9.3,3,.3,1.8,0,3.2-.4,4.3-1.2,1.1-.8,1.7-1.8,1.7-3s-.3-1.7-.8-2.3-1.2-1-2.1-1.3c-.8-.4-1.7-.7-2.7-1.1-1-.3-2.1-.6-3.1-.9-1-.3-2-.8-2.9-1.3-.9-.5-1.6-1.3-2.1-2.1-.5-.9-.8-2-.8-3.4s.3-2.5.8-3.4c.5-1,1.3-1.7,2.1-2.4.9-.6,1.9-1.1,3-1.4,1.1-.3,2.2-.4,3.3-.4,1.6,0,2.9.2,4.1.6,1.1.4,2.3.9,3.5,1.4v3.8c-1.3-.7-2.5-1.3-3.6-1.7-1.1-.4-2.3-.7-3.8-.7s-2.7.3-3.9.9c-1.1.6-1.7,1.5-1.7,2.7s.3,1.8.9,2.4,1.4,1,2.3,1.4c1,.3,2,.7,3.1,1,.9.3,1.8.6,2.8.9,1,.3,1.8.8,2.7,1.3.8.5,1.5,1.3,2,2.1.5.9.8,2,.8,3.4s-.5,3.4-1.4,4.6-2.2,2.1-3.6,2.7c-1.5.6-3,.8-4.5.8Z"/>
|
||||
</g>
|
||||
</g>
|
||||
</svg>
|
||||
|
After Width: | Height: | Size: 4.7 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 716 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 793 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 183 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 69 KiB |
@@ -0,0 +1,28 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<svg id="a" xmlns="http://www.w3.org/2000/svg" width="180.62mm" height="180.62mm" viewBox="0 0 300 400" xmlns:c2pa="http://c2pa.org/manifest">
|
||||
<rect x="0" y="0" width="300" height="400" fill="none"/>
|
||||
<g fill="#ffffff" transform="translate(3,365) scale(0.13)">
|
||||
<g>
|
||||
<path d="M139.4.8l-.2,62c-34.3,0-63.4,21.8-73.2,51.9C26.4,141,.2,187.8.2,241.3H0l.2-101.3C.2,63.1,62.4.8,139.4.8Z"/>
|
||||
<path d="M139.1,92.5l-.8,62.5c-42.6,0-77.1,38.6-77.1,86.3l1-103.9c0-7.9,1.3-15.5,3.6-22.7,21.2-14.1,46.3-22.3,73.2-22.3Z"/>
|
||||
<path d="M65.9,114.7c-2.3,7.2-3.6,14.8-3.6,22.7l-1,103.9H.2c0-53.5,26.3-100.3,65.7-126.6Z"/>
|
||||
</g>
|
||||
<polygon points="202.8 .4 202.8 92.9 226.2 92.9 226.2 56 259.8 56 259.8 36.1 226.2 36.1 226.2 19.4 265.7 19.4 265.7 0 202.8 .4"/>
|
||||
<polygon points="282.3 -.3 282.3 93 346.1 93 346.1 72.4 306.8 72.4 306.8 55.6 341.7 55.6 341.7 36.4 306.5 36.4 306.5 19.6 346.2 19.6 346.2 -.3 282.3 -.3"/>
|
||||
<polygon points="365.9 92.8 429.5 92.8 429.5 70.9 389.6 70.9 389.6 .2 365 .2 365.9 92.8"/>
|
||||
<polygon points="448 0 471.9 0 471.9 92.5 447.5 92.5 448 0"/>
|
||||
<path d="M485.1,92.5s34.7-44.3,33.4-46.5S485.7,0,485.7,0h29l18.4,24.8L550.1,0h26.6l-29.9,45.4,33.1,46.8h-28.8l-19.3-27.4-18.9,28.1-27.9-.4Z"/>
|
||||
<g>
|
||||
<path d="M210.9,154.1c-1.9,0-3.7-.2-5.3-.7-1.6-.4-3-1-4.2-1.6v-3.9c1.1.6,2.4,1.1,3.9,1.6,1.5.5,3.2.7,5.1.7,3.1,0,5.5-.6,7.2-1.7,1.7-1.2,2.5-2.8,2.5-5s-.8-3.9-2.5-5c-1.7-1.2-4.2-1.7-7.4-1.7h-3.9v-3.7h4c2.6,0,4.5-.5,5.9-1.5,1.4-1,2-2.4,2-4.2s-.3-2.3-1-3.1c-.6-.8-1.6-1.5-2.8-1.9-1.3-.4-2.8-.7-4.6-.7s-3,.2-4.3.6c-1.3.4-2.4.8-3.3,1.3v-3.9c1.1-.5,2.3-.9,3.6-1.3,1.3-.4,2.8-.5,4.5-.5s4,.3,5.5.8c1.5.5,2.7,1.3,3.6,2.2.9.9,1.6,1.9,2,3.1.4,1.1.6,2.3.6,3.4s-.2,2.4-.7,3.3c-.5.9-1,1.7-1.6,2.2-.6.6-1.4,1.1-2.3,1.6,1.3.7,2.3,1.4,3.2,2.1s1.6,1.7,2.2,2.8c.6,1.1,1,2.5,1,4.2s-.2,2.5-.7,3.8c-.5,1.2-1.2,2.4-2.2,3.4s-2.4,1.8-4,2.4c-1.7.6-3.7.9-6.1.9Z"/>
|
||||
<path d="M232.1,153.7v-35.4h11.1c5.5,0,9.7,1.5,12.4,4.4,2.8,3,4.2,7.4,4.2,13.2s-1.4,10.3-4.2,13.2c-2.8,3-6.9,4.5-12.4,4.5h-11.1ZM235.9,150h7c4.5,0,7.8-1.1,9.9-3.4,2-2.3,3.1-5.8,3.1-10.7s-1-8.4-3.1-10.7c-2-2.3-5.3-3.4-9.9-3.4h-7v28.2Z"/>
|
||||
<path d="M291.9,154.4c-.8,0-1.7-.1-2.6-.3-1-.2-1.9-.5-2.8-.8-.9-.3-1.7-.7-2.4-1l1.3-1.3v14.2h-3.8v-33.2c0-1.1.3-2,1-2.7.7-.7,1.6-1.2,2.7-1.6,1.1-.4,2.3-.6,3.5-.8,1.2-.2,2.4-.2,3.5-.2,2.1,0,4.1.4,6,1.3,1.9.9,3.4,2.4,4.6,4.5s1.7,5,1.7,8.6-.5,5.1-1.5,7.1c-1,2-2.4,3.5-4.3,4.6-1.9,1.1-4.2,1.6-6.9,1.6ZM291.9,150.9c1.9,0,3.5-.4,4.8-1.2,1.3-.8,2.2-2,2.8-3.5.6-1.5,1-3.2,1-5.1s-.2-3.7-.6-5.4c-.4-1.7-1.2-3-2.4-4-1.2-1-3-1.5-5.2-1.5s-3.4.2-4.8.6c-1.4.4-2,1-2,1.8v16.4c1.1.6,2.2,1.1,3.3,1.4s2.2.5,3.3.5Z"/>
|
||||
<path d="M311.1,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1c-.8,0-1.6.2-2.4.3-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
|
||||
<path d="M330.5,122.5v-4.2h4.2v4.2h-4.2ZM330.8,153.7v-26.4h3.8v26.4h-3.8Z"/>
|
||||
<path d="M342.7,129.3c.8-.4,1.7-.8,2.6-1.1.9-.3,1.8-.6,2.8-.8.9-.2,1.9-.4,2.9-.5,1-.1,2-.2,2.9-.2,2.6,0,4.6.4,6.1,1.1,1.5.8,2.6,1.9,3.3,3.3.7,1.4,1,3.2,1,5.2v17.2h-3.8v-17.2c0-.6,0-1.3-.2-2-.2-.7-.5-1.4-.9-2-.5-.7-1.2-1.2-2.1-1.6s-2.2-.6-3.8-.6-2.2,0-3.4.3-2.4.4-3.6.8v22.4h-3.8v-24.3Z"/>
|
||||
<path d="M380.7,154.1c-1.9,0-3.4-.6-4.7-1.7-1.3-1.1-1.9-2.9-1.9-5.1v-16.5h-4.6v-3.5h4.6v-7.5h3.8v7.5h6.8v3.5h-6.8v15.3c0,1.5.2,2.6.7,3.3s1.4,1.1,2.8,1.1,1.3,0,1.9-.2,1.1-.3,1.5-.5v3.6c-.5.2-1.1.3-1.9.5s-1.5.2-2.1.2Z"/>
|
||||
<path d="M402,154.4c-2.5,0-4.7-.5-6.5-1.6-1.8-1-3.3-2.6-4.2-4.7-1-2.1-1.5-4.7-1.5-7.8,0-4.6,1-8,3.1-10.3,2.1-2.3,4.9-3.4,8.5-3.4s5.1.6,6.8,1.9c1.7,1.3,2.9,3,3.7,5.1.7,2.2,1.1,4.6,1.1,7.3h-21.3l.3-3.5h18.5l-1.5.5c-.1-2.6-.8-4.6-2-5.9-1.2-1.3-3.1-2-5.6-2s-3.2.3-4.3,1c-1.1.6-2,1.7-2.6,3.3s-.8,3.8-.8,6.6.8,5.7,2.3,7.3c1.5,1.7,3.6,2.5,6.3,2.5s2.5,0,3.6-.3,2.1-.5,3-.8c.9-.4,1.7-.7,2.4-1.2v3.9c-1.3.6-2.7,1.1-4.2,1.4-1.5.3-3.2.5-5.1.5Z"/>
|
||||
<path d="M419.5,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1-1.6.2-2.4.3c-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
|
||||
<path d="M446.4,154.4c-1.9,0-3.5-.2-4.8-.6s-2.6-.9-4-1.6v-4c1.1.6,2.1,1.1,2.9,1.5s1.7.7,2.6.9c.9.2,1.9.3,3,.3,1.8,0,3.2-.4,4.3-1.2,1.1-.8,1.7-1.8,1.7-3s-.3-1.7-.8-2.3-1.2-1-2.1-1.3c-.8-.4-1.7-.7-2.7-1.1-1-.3-2.1-.6-3.1-.9-1-.3-2-.8-2.9-1.3-.9-.5-1.6-1.3-2.1-2.1-.5-.9-.8-2-.8-3.4s.3-2.5.8-3.4c.5-1,1.3-1.7,2.1-2.4.9-.6,1.9-1.1,3-1.4,1.1-.3,2.2-.4,3.3-.4,1.6,0,2.9.2,4.1.6,1.1.4,2.3.9,3.5,1.4v3.8c-1.3-.7-2.5-1.3-3.6-1.7-1.1-.4-2.3-.7-3.8-.7s-2.7.3-3.9.9c-1.1.6-1.7,1.5-1.7,2.7s.3,1.8.9,2.4,1.4,1,2.3,1.4c1,.3,2,.7,3.1,1,.9.3,1.8.6,2.8.9,1,.3,1.8.8,2.7,1.3.8.5,1.5,1.3,2,2.1.5.9.8,2,.8,3.4s-.5,3.4-1.4,4.6-2.2,2.1-3.6,2.7c-1.5.6-3,.8-4.5.8Z"/>
|
||||
</g>
|
||||
</g>
|
||||
</svg>
|
||||
|
After Width: | Height: | Size: 4.7 KiB |
@@ -0,0 +1,28 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<svg id="a" xmlns="http://www.w3.org/2000/svg" width="180.62mm" height="180.62mm" viewBox="0 0 235 244" xmlns:c2pa="http://c2pa.org/manifest">
|
||||
<rect x="0" y="0" width="235" height="244" fill="none"/>
|
||||
<g fill="#ffffff" transform="translate(2,215) scale(0.1)">
|
||||
<g>
|
||||
<path d="M139.4.8l-.2,62c-34.3,0-63.4,21.8-73.2,51.9C26.4,141,.2,187.8.2,241.3H0l.2-101.3C.2,63.1,62.4.8,139.4.8Z"/>
|
||||
<path d="M139.1,92.5l-.8,62.5c-42.6,0-77.1,38.6-77.1,86.3l1-103.9c0-7.9,1.3-15.5,3.6-22.7,21.2-14.1,46.3-22.3,73.2-22.3Z"/>
|
||||
<path d="M65.9,114.7c-2.3,7.2-3.6,14.8-3.6,22.7l-1,103.9H.2c0-53.5,26.3-100.3,65.7-126.6Z"/>
|
||||
</g>
|
||||
<polygon points="202.8 .4 202.8 92.9 226.2 92.9 226.2 56 259.8 56 259.8 36.1 226.2 36.1 226.2 19.4 265.7 19.4 265.7 0 202.8 .4"/>
|
||||
<polygon points="282.3 -.3 282.3 93 346.1 93 346.1 72.4 306.8 72.4 306.8 55.6 341.7 55.6 341.7 36.4 306.5 36.4 306.5 19.6 346.2 19.6 346.2 -.3 282.3 -.3"/>
|
||||
<polygon points="365.9 92.8 429.5 92.8 429.5 70.9 389.6 70.9 389.6 .2 365 .2 365.9 92.8"/>
|
||||
<polygon points="448 0 471.9 0 471.9 92.5 447.5 92.5 448 0"/>
|
||||
<path d="M485.1,92.5s34.7-44.3,33.4-46.5S485.7,0,485.7,0h29l18.4,24.8L550.1,0h26.6l-29.9,45.4,33.1,46.8h-28.8l-19.3-27.4-18.9,28.1-27.9-.4Z"/>
|
||||
<g>
|
||||
<path d="M210.9,154.1c-1.9,0-3.7-.2-5.3-.7-1.6-.4-3-1-4.2-1.6v-3.9c1.1.6,2.4,1.1,3.9,1.6,1.5.5,3.2.7,5.1.7,3.1,0,5.5-.6,7.2-1.7,1.7-1.2,2.5-2.8,2.5-5s-.8-3.9-2.5-5c-1.7-1.2-4.2-1.7-7.4-1.7h-3.9v-3.7h4c2.6,0,4.5-.5,5.9-1.5,1.4-1,2-2.4,2-4.2s-.3-2.3-1-3.1c-.6-.8-1.6-1.5-2.8-1.9-1.3-.4-2.8-.7-4.6-.7s-3,.2-4.3.6c-1.3.4-2.4.8-3.3,1.3v-3.9c1.1-.5,2.3-.9,3.6-1.3,1.3-.4,2.8-.5,4.5-.5s4,.3,5.5.8c1.5.5,2.7,1.3,3.6,2.2.9.9,1.6,1.9,2,3.1.4,1.1.6,2.3.6,3.4s-.2,2.4-.7,3.3c-.5.9-1,1.7-1.6,2.2-.6.6-1.4,1.1-2.3,1.6,1.3.7,2.3,1.4,3.2,2.1s1.6,1.7,2.2,2.8c.6,1.1,1,2.5,1,4.2s-.2,2.5-.7,3.8c-.5,1.2-1.2,2.4-2.2,3.4s-2.4,1.8-4,2.4c-1.7.6-3.7.9-6.1.9Z"/>
|
||||
<path d="M232.1,153.7v-35.4h11.1c5.5,0,9.7,1.5,12.4,4.4,2.8,3,4.2,7.4,4.2,13.2s-1.4,10.3-4.2,13.2c-2.8,3-6.9,4.5-12.4,4.5h-11.1ZM235.9,150h7c4.5,0,7.8-1.1,9.9-3.4,2-2.3,3.1-5.8,3.1-10.7s-1-8.4-3.1-10.7c-2-2.3-5.3-3.4-9.9-3.4h-7v28.2Z"/>
|
||||
<path d="M291.9,154.4c-.8,0-1.7-.1-2.6-.3-1-.2-1.9-.5-2.8-.8-.9-.3-1.7-.7-2.4-1l1.3-1.3v14.2h-3.8v-33.2c0-1.1.3-2,1-2.7.7-.7,1.6-1.2,2.7-1.6,1.1-.4,2.3-.6,3.5-.8,1.2-.2,2.4-.2,3.5-.2,2.1,0,4.1.4,6,1.3,1.9.9,3.4,2.4,4.6,4.5s1.7,5,1.7,8.6-.5,5.1-1.5,7.1c-1,2-2.4,3.5-4.3,4.6-1.9,1.1-4.2,1.6-6.9,1.6ZM291.9,150.9c1.9,0,3.5-.4,4.8-1.2,1.3-.8,2.2-2,2.8-3.5.6-1.5,1-3.2,1-5.1s-.2-3.7-.6-5.4c-.4-1.7-1.2-3-2.4-4-1.2-1-3-1.5-5.2-1.5s-3.4.2-4.8.6c-1.4.4-2,1-2,1.8v16.4c1.1.6,2.2,1.1,3.3,1.4s2.2.5,3.3.5Z"/>
|
||||
<path d="M311.1,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1c-.8,0-1.6.2-2.4.3-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
|
||||
<path d="M330.5,122.5v-4.2h4.2v4.2h-4.2ZM330.8,153.7v-26.4h3.8v26.4h-3.8Z"/>
|
||||
<path d="M342.7,129.3c.8-.4,1.7-.8,2.6-1.1.9-.3,1.8-.6,2.8-.8.9-.2,1.9-.4,2.9-.5,1-.1,2-.2,2.9-.2,2.6,0,4.6.4,6.1,1.1,1.5.8,2.6,1.9,3.3,3.3.7,1.4,1,3.2,1,5.2v17.2h-3.8v-17.2c0-.6,0-1.3-.2-2-.2-.7-.5-1.4-.9-2-.5-.7-1.2-1.2-2.1-1.6s-2.2-.6-3.8-.6-2.2,0-3.4.3-2.4.4-3.6.8v22.4h-3.8v-24.3Z"/>
|
||||
<path d="M380.7,154.1c-1.9,0-3.4-.6-4.7-1.7-1.3-1.1-1.9-2.9-1.9-5.1v-16.5h-4.6v-3.5h4.6v-7.5h3.8v7.5h6.8v3.5h-6.8v15.3c0,1.5.2,2.6.7,3.3s1.4,1.1,2.8,1.1,1.3,0,1.9-.2,1.1-.3,1.5-.5v3.6c-.5.2-1.1.3-1.9.5s-1.5.2-2.1.2Z"/>
|
||||
<path d="M402,154.4c-2.5,0-4.7-.5-6.5-1.6-1.8-1-3.3-2.6-4.2-4.7-1-2.1-1.5-4.7-1.5-7.8,0-4.6,1-8,3.1-10.3,2.1-2.3,4.9-3.4,8.5-3.4s5.1.6,6.8,1.9c1.7,1.3,2.9,3,3.7,5.1.7,2.2,1.1,4.6,1.1,7.3h-21.3l.3-3.5h18.5l-1.5.5c-.1-2.6-.8-4.6-2-5.9-1.2-1.3-3.1-2-5.6-2s-3.2.3-4.3,1c-1.1.6-2,1.7-2.6,3.3s-.8,3.8-.8,6.6.8,5.7,2.3,7.3c1.5,1.7,3.6,2.5,6.3,2.5s2.5,0,3.6-.3,2.1-.5,3-.8c.9-.4,1.7-.7,2.4-1.2v3.9c-1.3.6-2.7,1.1-4.2,1.4-1.5.3-3.2.5-5.1.5Z"/>
|
||||
<path d="M419.5,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1-1.6.2-2.4.3c-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
|
||||
<path d="M446.4,154.4c-1.9,0-3.5-.2-4.8-.6s-2.6-.9-4-1.6v-4c1.1.6,2.1,1.1,2.9,1.5s1.7.7,2.6.9c.9.2,1.9.3,3,.3,1.8,0,3.2-.4,4.3-1.2,1.1-.8,1.7-1.8,1.7-3s-.3-1.7-.8-2.3-1.2-1-2.1-1.3c-.8-.4-1.7-.7-2.7-1.1-1-.3-2.1-.6-3.1-.9-1-.3-2-.8-2.9-1.3-.9-.5-1.6-1.3-2.1-2.1-.5-.9-.8-2-.8-3.4s.3-2.5.8-3.4c.5-1,1.3-1.7,2.1-2.4.9-.6,1.9-1.1,3-1.4,1.1-.3,2.2-.4,3.3-.4,1.6,0,2.9.2,4.1.6,1.1.4,2.3.9,3.5,1.4v3.8c-1.3-.7-2.5-1.3-3.6-1.7-1.1-.4-2.3-.7-3.8-.7s-2.7.3-3.9.9c-1.1.6-1.7,1.5-1.7,2.7s.3,1.8.9,2.4,1.4,1,2.3,1.4c1,.3,2,.7,3.1,1,.9.3,1.8.6,2.8.9,1,.3,1.8.8,2.7,1.3.8.5,1.5,1.3,2,2.1.5.9.8,2,.8,3.4s-.5,3.4-1.4,4.6-2.2,2.1-3.6,2.7c-1.5.6-3,.8-4.5.8Z"/>
|
||||
</g>
|
||||
</g>
|
||||
</svg>
|
||||
|
After Width: | Height: | Size: 4.7 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 1023 KiB |
@@ -0,0 +1,28 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<svg id="a" xmlns="http://www.w3.org/2000/svg" width="180.62mm" height="180.62mm" viewBox="0 0 600 400" xmlns:c2pa="http://c2pa.org/manifest">
|
||||
<rect x="0" y="0" width="600" height="400" fill="none"/>
|
||||
<g fill="#ffffff" transform="translate(4,357) scale(0.16)">
|
||||
<g>
|
||||
<path d="M139.4.8l-.2,62c-34.3,0-63.4,21.8-73.2,51.9C26.4,141,.2,187.8.2,241.3H0l.2-101.3C.2,63.1,62.4.8,139.4.8Z"/>
|
||||
<path d="M139.1,92.5l-.8,62.5c-42.6,0-77.1,38.6-77.1,86.3l1-103.9c0-7.9,1.3-15.5,3.6-22.7,21.2-14.1,46.3-22.3,73.2-22.3Z"/>
|
||||
<path d="M65.9,114.7c-2.3,7.2-3.6,14.8-3.6,22.7l-1,103.9H.2c0-53.5,26.3-100.3,65.7-126.6Z"/>
|
||||
</g>
|
||||
<polygon points="202.8 .4 202.8 92.9 226.2 92.9 226.2 56 259.8 56 259.8 36.1 226.2 36.1 226.2 19.4 265.7 19.4 265.7 0 202.8 .4"/>
|
||||
<polygon points="282.3 -.3 282.3 93 346.1 93 346.1 72.4 306.8 72.4 306.8 55.6 341.7 55.6 341.7 36.4 306.5 36.4 306.5 19.6 346.2 19.6 346.2 -.3 282.3 -.3"/>
|
||||
<polygon points="365.9 92.8 429.5 92.8 429.5 70.9 389.6 70.9 389.6 .2 365 .2 365.9 92.8"/>
|
||||
<polygon points="448 0 471.9 0 471.9 92.5 447.5 92.5 448 0"/>
|
||||
<path d="M485.1,92.5s34.7-44.3,33.4-46.5S485.7,0,485.7,0h29l18.4,24.8L550.1,0h26.6l-29.9,45.4,33.1,46.8h-28.8l-19.3-27.4-18.9,28.1-27.9-.4Z"/>
|
||||
<g>
|
||||
<path d="M210.9,154.1c-1.9,0-3.7-.2-5.3-.7-1.6-.4-3-1-4.2-1.6v-3.9c1.1.6,2.4,1.1,3.9,1.6,1.5.5,3.2.7,5.1.7,3.1,0,5.5-.6,7.2-1.7,1.7-1.2,2.5-2.8,2.5-5s-.8-3.9-2.5-5c-1.7-1.2-4.2-1.7-7.4-1.7h-3.9v-3.7h4c2.6,0,4.5-.5,5.9-1.5,1.4-1,2-2.4,2-4.2s-.3-2.3-1-3.1c-.6-.8-1.6-1.5-2.8-1.9-1.3-.4-2.8-.7-4.6-.7s-3,.2-4.3.6c-1.3.4-2.4.8-3.3,1.3v-3.9c1.1-.5,2.3-.9,3.6-1.3,1.3-.4,2.8-.5,4.5-.5s4,.3,5.5.8c1.5.5,2.7,1.3,3.6,2.2.9.9,1.6,1.9,2,3.1.4,1.1.6,2.3.6,3.4s-.2,2.4-.7,3.3c-.5.9-1,1.7-1.6,2.2-.6.6-1.4,1.1-2.3,1.6,1.3.7,2.3,1.4,3.2,2.1s1.6,1.7,2.2,2.8c.6,1.1,1,2.5,1,4.2s-.2,2.5-.7,3.8c-.5,1.2-1.2,2.4-2.2,3.4s-2.4,1.8-4,2.4c-1.7.6-3.7.9-6.1.9Z"/>
|
||||
<path d="M232.1,153.7v-35.4h11.1c5.5,0,9.7,1.5,12.4,4.4,2.8,3,4.2,7.4,4.2,13.2s-1.4,10.3-4.2,13.2c-2.8,3-6.9,4.5-12.4,4.5h-11.1ZM235.9,150h7c4.5,0,7.8-1.1,9.9-3.4,2-2.3,3.1-5.8,3.1-10.7s-1-8.4-3.1-10.7c-2-2.3-5.3-3.4-9.9-3.4h-7v28.2Z"/>
|
||||
<path d="M291.9,154.4c-.8,0-1.7-.1-2.6-.3-1-.2-1.9-.5-2.8-.8-.9-.3-1.7-.7-2.4-1l1.3-1.3v14.2h-3.8v-33.2c0-1.1.3-2,1-2.7.7-.7,1.6-1.2,2.7-1.6,1.1-.4,2.3-.6,3.5-.8,1.2-.2,2.4-.2,3.5-.2,2.1,0,4.1.4,6,1.3,1.9.9,3.4,2.4,4.6,4.5s1.7,5,1.7,8.6-.5,5.1-1.5,7.1c-1,2-2.4,3.5-4.3,4.6-1.9,1.1-4.2,1.6-6.9,1.6ZM291.9,150.9c1.9,0,3.5-.4,4.8-1.2,1.3-.8,2.2-2,2.8-3.5.6-1.5,1-3.2,1-5.1s-.2-3.7-.6-5.4c-.4-1.7-1.2-3-2.4-4-1.2-1-3-1.5-5.2-1.5s-3.4.2-4.8.6c-1.4.4-2,1-2,1.8v16.4c1.1.6,2.2,1.1,3.3,1.4s2.2.5,3.3.5Z"/>
|
||||
<path d="M311.1,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1c-.8,0-1.6.2-2.4.3-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
|
||||
<path d="M330.5,122.5v-4.2h4.2v4.2h-4.2ZM330.8,153.7v-26.4h3.8v26.4h-3.8Z"/>
|
||||
<path d="M342.7,129.3c.8-.4,1.7-.8,2.6-1.1.9-.3,1.8-.6,2.8-.8.9-.2,1.9-.4,2.9-.5,1-.1,2-.2,2.9-.2,2.6,0,4.6.4,6.1,1.1,1.5.8,2.6,1.9,3.3,3.3.7,1.4,1,3.2,1,5.2v17.2h-3.8v-17.2c0-.6,0-1.3-.2-2-.2-.7-.5-1.4-.9-2-.5-.7-1.2-1.2-2.1-1.6s-2.2-.6-3.8-.6-2.2,0-3.4.3-2.4.4-3.6.8v22.4h-3.8v-24.3Z"/>
|
||||
<path d="M380.7,154.1c-1.9,0-3.4-.6-4.7-1.7-1.3-1.1-1.9-2.9-1.9-5.1v-16.5h-4.6v-3.5h4.6v-7.5h3.8v7.5h6.8v3.5h-6.8v15.3c0,1.5.2,2.6.7,3.3s1.4,1.1,2.8,1.1,1.3,0,1.9-.2,1.1-.3,1.5-.5v3.6c-.5.2-1.1.3-1.9.5s-1.5.2-2.1.2Z"/>
|
||||
<path d="M402,154.4c-2.5,0-4.7-.5-6.5-1.6-1.8-1-3.3-2.6-4.2-4.7-1-2.1-1.5-4.7-1.5-7.8,0-4.6,1-8,3.1-10.3,2.1-2.3,4.9-3.4,8.5-3.4s5.1.6,6.8,1.9c1.7,1.3,2.9,3,3.7,5.1.7,2.2,1.1,4.6,1.1,7.3h-21.3l.3-3.5h18.5l-1.5.5c-.1-2.6-.8-4.6-2-5.9-1.2-1.3-3.1-2-5.6-2s-3.2.3-4.3,1c-1.1.6-2,1.7-2.6,3.3s-.8,3.8-.8,6.6.8,5.7,2.3,7.3c1.5,1.7,3.6,2.5,6.3,2.5s2.5,0,3.6-.3,2.1-.5,3-.8c.9-.4,1.7-.7,2.4-1.2v3.9c-1.3.6-2.7,1.1-4.2,1.4-1.5.3-3.2.5-5.1.5Z"/>
|
||||
<path d="M419.5,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1-1.6.2-2.4.3c-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
|
||||
<path d="M446.4,154.4c-1.9,0-3.5-.2-4.8-.6s-2.6-.9-4-1.6v-4c1.1.6,2.1,1.1,2.9,1.5s1.7.7,2.6.9c.9.2,1.9.3,3,.3,1.8,0,3.2-.4,4.3-1.2,1.1-.8,1.7-1.8,1.7-3s-.3-1.7-.8-2.3-1.2-1-2.1-1.3c-.8-.4-1.7-.7-2.7-1.1-1-.3-2.1-.6-3.1-.9-1-.3-2-.8-2.9-1.3-.9-.5-1.6-1.3-2.1-2.1-.5-.9-.8-2-.8-3.4s.3-2.5.8-3.4c.5-1,1.3-1.7,2.1-2.4.9-.6,1.9-1.1,3-1.4,1.1-.3,2.2-.4,3.3-.4,1.6,0,2.9.2,4.1.6,1.1.4,2.3.9,3.5,1.4v3.8c-1.3-.7-2.5-1.3-3.6-1.7-1.1-.4-2.3-.7-3.8-.7s-2.7.3-3.9.9c-1.1.6-1.7,1.5-1.7,2.7s.3,1.8.9,2.4,1.4,1,2.3,1.4c1,.3,2,.7,3.1,1,.9.3,1.8.6,2.8.9,1,.3,1.8.8,2.7,1.3.8.5,1.5,1.3,2,2.1.5.9.8,2,.8,3.4s-.5,3.4-1.4,4.6-2.2,2.1-3.6,2.7c-1.5.6-3,.8-4.5.8Z"/>
|
||||
</g>
|
||||
</g>
|
||||
</svg>
|
||||
|
After Width: | Height: | Size: 4.7 KiB |
@@ -0,0 +1,28 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<svg id="a" xmlns="http://www.w3.org/2000/svg" width="180.62mm" height="180.62mm" viewBox="0 0 205 255" xmlns:c2pa="http://c2pa.org/manifest">
|
||||
<rect x="0" y="0" width="205" height="255" fill="none"/>
|
||||
<g fill="#ffffff" transform="translate(3,228) scale(0.1)">
|
||||
<g>
|
||||
<path d="M139.4.8l-.2,62c-34.3,0-63.4,21.8-73.2,51.9C26.4,141,.2,187.8.2,241.3H0l.2-101.3C.2,63.1,62.4.8,139.4.8Z"/>
|
||||
<path d="M139.1,92.5l-.8,62.5c-42.6,0-77.1,38.6-77.1,86.3l1-103.9c0-7.9,1.3-15.5,3.6-22.7,21.2-14.1,46.3-22.3,73.2-22.3Z"/>
|
||||
<path d="M65.9,114.7c-2.3,7.2-3.6,14.8-3.6,22.7l-1,103.9H.2c0-53.5,26.3-100.3,65.7-126.6Z"/>
|
||||
</g>
|
||||
<polygon points="202.8 .4 202.8 92.9 226.2 92.9 226.2 56 259.8 56 259.8 36.1 226.2 36.1 226.2 19.4 265.7 19.4 265.7 0 202.8 .4"/>
|
||||
<polygon points="282.3 -.3 282.3 93 346.1 93 346.1 72.4 306.8 72.4 306.8 55.6 341.7 55.6 341.7 36.4 306.5 36.4 306.5 19.6 346.2 19.6 346.2 -.3 282.3 -.3"/>
|
||||
<polygon points="365.9 92.8 429.5 92.8 429.5 70.9 389.6 70.9 389.6 .2 365 .2 365.9 92.8"/>
|
||||
<polygon points="448 0 471.9 0 471.9 92.5 447.5 92.5 448 0"/>
|
||||
<path d="M485.1,92.5s34.7-44.3,33.4-46.5S485.7,0,485.7,0h29l18.4,24.8L550.1,0h26.6l-29.9,45.4,33.1,46.8h-28.8l-19.3-27.4-18.9,28.1-27.9-.4Z"/>
|
||||
<g>
|
||||
<path d="M210.9,154.1c-1.9,0-3.7-.2-5.3-.7-1.6-.4-3-1-4.2-1.6v-3.9c1.1.6,2.4,1.1,3.9,1.6,1.5.5,3.2.7,5.1.7,3.1,0,5.5-.6,7.2-1.7,1.7-1.2,2.5-2.8,2.5-5s-.8-3.9-2.5-5c-1.7-1.2-4.2-1.7-7.4-1.7h-3.9v-3.7h4c2.6,0,4.5-.5,5.9-1.5,1.4-1,2-2.4,2-4.2s-.3-2.3-1-3.1c-.6-.8-1.6-1.5-2.8-1.9-1.3-.4-2.8-.7-4.6-.7s-3,.2-4.3.6c-1.3.4-2.4.8-3.3,1.3v-3.9c1.1-.5,2.3-.9,3.6-1.3,1.3-.4,2.8-.5,4.5-.5s4,.3,5.5.8c1.5.5,2.7,1.3,3.6,2.2.9.9,1.6,1.9,2,3.1.4,1.1.6,2.3.6,3.4s-.2,2.4-.7,3.3c-.5.9-1,1.7-1.6,2.2-.6.6-1.4,1.1-2.3,1.6,1.3.7,2.3,1.4,3.2,2.1s1.6,1.7,2.2,2.8c.6,1.1,1,2.5,1,4.2s-.2,2.5-.7,3.8c-.5,1.2-1.2,2.4-2.2,3.4s-2.4,1.8-4,2.4c-1.7.6-3.7.9-6.1.9Z"/>
|
||||
<path d="M232.1,153.7v-35.4h11.1c5.5,0,9.7,1.5,12.4,4.4,2.8,3,4.2,7.4,4.2,13.2s-1.4,10.3-4.2,13.2c-2.8,3-6.9,4.5-12.4,4.5h-11.1ZM235.9,150h7c4.5,0,7.8-1.1,9.9-3.4,2-2.3,3.1-5.8,3.1-10.7s-1-8.4-3.1-10.7c-2-2.3-5.3-3.4-9.9-3.4h-7v28.2Z"/>
|
||||
<path d="M291.9,154.4c-.8,0-1.7-.1-2.6-.3-1-.2-1.9-.5-2.8-.8-.9-.3-1.7-.7-2.4-1l1.3-1.3v14.2h-3.8v-33.2c0-1.1.3-2,1-2.7.7-.7,1.6-1.2,2.7-1.6,1.1-.4,2.3-.6,3.5-.8,1.2-.2,2.4-.2,3.5-.2,2.1,0,4.1.4,6,1.3,1.9.9,3.4,2.4,4.6,4.5s1.7,5,1.7,8.6-.5,5.1-1.5,7.1c-1,2-2.4,3.5-4.3,4.6-1.9,1.1-4.2,1.6-6.9,1.6ZM291.9,150.9c1.9,0,3.5-.4,4.8-1.2,1.3-.8,2.2-2,2.8-3.5.6-1.5,1-3.2,1-5.1s-.2-3.7-.6-5.4c-.4-1.7-1.2-3-2.4-4-1.2-1-3-1.5-5.2-1.5s-3.4.2-4.8.6c-1.4.4-2,1-2,1.8v16.4c1.1.6,2.2,1.1,3.3,1.4s2.2.5,3.3.5Z"/>
|
||||
<path d="M311.1,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1c-.8,0-1.6.2-2.4.3-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
|
||||
<path d="M330.5,122.5v-4.2h4.2v4.2h-4.2ZM330.8,153.7v-26.4h3.8v26.4h-3.8Z"/>
|
||||
<path d="M342.7,129.3c.8-.4,1.7-.8,2.6-1.1.9-.3,1.8-.6,2.8-.8.9-.2,1.9-.4,2.9-.5,1-.1,2-.2,2.9-.2,2.6,0,4.6.4,6.1,1.1,1.5.8,2.6,1.9,3.3,3.3.7,1.4,1,3.2,1,5.2v17.2h-3.8v-17.2c0-.6,0-1.3-.2-2-.2-.7-.5-1.4-.9-2-.5-.7-1.2-1.2-2.1-1.6s-2.2-.6-3.8-.6-2.2,0-3.4.3-2.4.4-3.6.8v22.4h-3.8v-24.3Z"/>
|
||||
<path d="M380.7,154.1c-1.9,0-3.4-.6-4.7-1.7-1.3-1.1-1.9-2.9-1.9-5.1v-16.5h-4.6v-3.5h4.6v-7.5h3.8v7.5h6.8v3.5h-6.8v15.3c0,1.5.2,2.6.7,3.3s1.4,1.1,2.8,1.1,1.3,0,1.9-.2,1.1-.3,1.5-.5v3.6c-.5.2-1.1.3-1.9.5s-1.5.2-2.1.2Z"/>
|
||||
<path d="M402,154.4c-2.5,0-4.7-.5-6.5-1.6-1.8-1-3.3-2.6-4.2-4.7-1-2.1-1.5-4.7-1.5-7.8,0-4.6,1-8,3.1-10.3,2.1-2.3,4.9-3.4,8.5-3.4s5.1.6,6.8,1.9c1.7,1.3,2.9,3,3.7,5.1.7,2.2,1.1,4.6,1.1,7.3h-21.3l.3-3.5h18.5l-1.5.5c-.1-2.6-.8-4.6-2-5.9-1.2-1.3-3.1-2-5.6-2s-3.2.3-4.3,1c-1.1.6-2,1.7-2.6,3.3s-.8,3.8-.8,6.6.8,5.7,2.3,7.3c1.5,1.7,3.6,2.5,6.3,2.5s2.5,0,3.6-.3,2.1-.5,3-.8c.9-.4,1.7-.7,2.4-1.2v3.9c-1.3.6-2.7,1.1-4.2,1.4-1.5.3-3.2.5-5.1.5Z"/>
|
||||
<path d="M419.5,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1-1.6.2-2.4.3c-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
|
||||
<path d="M446.4,154.4c-1.9,0-3.5-.2-4.8-.6s-2.6-.9-4-1.6v-4c1.1.6,2.1,1.1,2.9,1.5s1.7.7,2.6.9c.9.2,1.9.3,3,.3,1.8,0,3.2-.4,4.3-1.2,1.1-.8,1.7-1.8,1.7-3s-.3-1.7-.8-2.3-1.2-1-2.1-1.3c-.8-.4-1.7-.7-2.7-1.1-1-.3-2.1-.6-3.1-.9-1-.3-2-.8-2.9-1.3-.9-.5-1.6-1.3-2.1-2.1-.5-.9-.8-2-.8-3.4s.3-2.5.8-3.4c.5-1,1.3-1.7,2.1-2.4.9-.6,1.9-1.1,3-1.4,1.1-.3,2.2-.4,3.3-.4,1.6,0,2.9.2,4.1.6,1.1.4,2.3.9,3.5,1.4v3.8c-1.3-.7-2.5-1.3-3.6-1.7-1.1-.4-2.3-.7-3.8-.7s-2.7.3-3.9.9c-1.1.6-1.7,1.5-1.7,2.7s.3,1.8.9,2.4,1.4,1,2.3,1.4c1,.3,2,.7,3.1,1,.9.3,1.8.6,2.8.9,1,.3,1.8.8,2.7,1.3.8.5,1.5,1.3,2,2.1.5.9.8,2,.8,3.4s-.5,3.4-1.4,4.6-2.2,2.1-3.6,2.7c-1.5.6-3,.8-4.5.8Z"/>
|
||||
</g>
|
||||
</g>
|
||||
</svg>
|
||||
|
After Width: | Height: | Size: 4.7 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 611 KiB |
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Medium Plastic Syringe @0.50mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "IQnumbi0N4BnvMfO",
|
||||
"filament_id": "OFAzgHcF",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 0.50mm nozzle",
|
||||
"FELIX Food Double 0.50mm nozzle",
|
||||
"FELIX Food Switch 0.50mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"31.22"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.05"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"3.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"6.0"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"0.75"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"7.2"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Medium Plastic Syringe @1.00mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "p8CG6dHMUxNl7iPL",
|
||||
"filament_id": "OFAzgHcF",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 1.00mm nozzle",
|
||||
"FELIX Food Double 1.00mm nozzle",
|
||||
"FELIX Food Switch 1.00mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"31.22"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.05"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"3.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"6.0"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"1.5"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"27.0"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Medium Plastic Syringe @2.00mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "s5uPS7I3E57tiRRC",
|
||||
"filament_id": "OFAzgHcF",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 2.00mm nozzle",
|
||||
"FELIX Food Double 2.00mm nozzle",
|
||||
"FELIX Food Switch 2.00mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"31.22"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.05"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"3.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"6.0"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"3.0"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"108.0"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Medium Plastic Syringe @3.00mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "zlZtghh6ytU7N09m",
|
||||
"filament_id": "OFAzgHcF",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 3.00mm nozzle",
|
||||
"FELIX Food Double 3.00mm nozzle",
|
||||
"FELIX Food Switch 3.00mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"31.22"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.05"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"3.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"6.0"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"4.5"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"216.0"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Medium Plastic Syringe @4.00mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "fvTZEcREMbs3JW1D",
|
||||
"filament_id": "OFAzgHcF",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 4.00mm nozzle",
|
||||
"FELIX Food Double 4.00mm nozzle",
|
||||
"FELIX Food Switch 4.00mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"31.22"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.05"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"3.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"6.0"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"6.0"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"432.0"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Medium Stainless Steel Syringe @0.50mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "2XyqnzMqyuRCqpPq",
|
||||
"filament_id": "OFqZSD1S",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 0.50mm nozzle",
|
||||
"FELIX Food Double 0.50mm nozzle",
|
||||
"FELIX Food Switch 0.50mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"25.4"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.05"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"10.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"10.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"2.0"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"0.75"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"7.2"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Medium Stainless Steel Syringe @1.00mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "yNxVUGOb1kUbXLiw",
|
||||
"filament_id": "OFqZSD1S",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 1.00mm nozzle",
|
||||
"FELIX Food Double 1.00mm nozzle",
|
||||
"FELIX Food Switch 1.00mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"25.4"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.05"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"10.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"10.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"2.0"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"1.5"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"27.0"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Medium Stainless Steel Syringe @2.00mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "4MhgYDnGFKLfurhc",
|
||||
"filament_id": "OFqZSD1S",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 2.00mm nozzle",
|
||||
"FELIX Food Double 2.00mm nozzle",
|
||||
"FELIX Food Switch 2.00mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"25.4"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.05"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"10.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"10.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"2.0"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"3.0"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"108.0"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Medium Stainless Steel Syringe @3.00mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "mEH3Rgzzwjq9iptd",
|
||||
"filament_id": "OFqZSD1S",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 3.00mm nozzle",
|
||||
"FELIX Food Double 3.00mm nozzle",
|
||||
"FELIX Food Switch 3.00mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"25.4"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.05"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"10.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"10.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"2.0"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"4.5"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"216.0"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Medium Stainless Steel Syringe @4.00mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "rJsNSIb8w9kOwhwE",
|
||||
"filament_id": "OFqZSD1S",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 4.00mm nozzle",
|
||||
"FELIX Food Double 4.00mm nozzle",
|
||||
"FELIX Food Switch 4.00mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"25.4"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.05"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"10.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"10.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"2.0"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"6.0"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"432.0"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Thick Stainless Steel Syringe @0.50mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "dJzDnkh8Kyn3phhF",
|
||||
"filament_id": "OFjXHG0Z",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 0.50mm nozzle",
|
||||
"FELIX Food Double 0.50mm nozzle",
|
||||
"FELIX Food Switch 0.50mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"25.4"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.02"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"2.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"4.0"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"0.75"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"4.8"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Thick Stainless Steel Syringe @1.00mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "QQi61sD4rX2jELMa",
|
||||
"filament_id": "OFjXHG0Z",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 1.00mm nozzle",
|
||||
"FELIX Food Double 1.00mm nozzle",
|
||||
"FELIX Food Switch 1.00mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"25.4"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.02"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"2.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"4.0"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"1.5"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"18.0"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Thick Stainless Steel Syringe @2.00mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "KUmfC5HZL2hXPfey",
|
||||
"filament_id": "OFjXHG0Z",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 2.00mm nozzle",
|
||||
"FELIX Food Double 2.00mm nozzle",
|
||||
"FELIX Food Switch 2.00mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"25.4"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.02"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"2.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"4.0"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"3.0"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"72.0"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Thick Stainless Steel Syringe @3.00mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "0BbaSUre1bztrKB0",
|
||||
"filament_id": "OFjXHG0Z",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 3.00mm nozzle",
|
||||
"FELIX Food Double 3.00mm nozzle",
|
||||
"FELIX Food Switch 3.00mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"25.4"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.02"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"2.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"4.0"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"4.5"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"144.0"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Thick Stainless Steel Syringe @4.00mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "b179BTbFqjhnsHPT",
|
||||
"filament_id": "OFjXHG0Z",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 4.00mm nozzle",
|
||||
"FELIX Food Double 4.00mm nozzle",
|
||||
"FELIX Food Switch 4.00mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"25.4"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.02"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"2.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"4.0"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"6.0"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"288.0"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Thin Plastic Syringe @0.50mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "dBTTG8HJRYb7GHqy",
|
||||
"filament_id": "OF0kP94Y",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 0.50mm nozzle",
|
||||
"FELIX Food Double 0.50mm nozzle",
|
||||
"FELIX Food Switch 0.50mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"31.22"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.1"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.75"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"1.5"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"0.75"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"10.8"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Thin Plastic Syringe @1.00mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "FITfR7iepAteWuno",
|
||||
"filament_id": "OF0kP94Y",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 1.00mm nozzle",
|
||||
"FELIX Food Double 1.00mm nozzle",
|
||||
"FELIX Food Switch 1.00mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"31.22"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.1"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.75"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"1.5"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"1.5"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"40.5"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Thin Plastic Syringe @2.00mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "i2DZouQfWUnIm4R5",
|
||||
"filament_id": "OF0kP94Y",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 2.00mm nozzle",
|
||||
"FELIX Food Double 2.00mm nozzle",
|
||||
"FELIX Food Switch 2.00mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"31.22"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.1"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.75"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"1.5"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"3.0"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"162.0"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Thin Plastic Syringe @3.00mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "EzV8T0DVT0NRPa7P",
|
||||
"filament_id": "OF0kP94Y",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 3.00mm nozzle",
|
||||
"FELIX Food Double 3.00mm nozzle",
|
||||
"FELIX Food Switch 3.00mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"31.22"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.1"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.75"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"1.5"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"4.5"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"324.0"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Thin Plastic Syringe @4.00mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "Q6msqrC9TM0un5qw",
|
||||
"filament_id": "OF0kP94Y",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 4.00mm nozzle",
|
||||
"FELIX Food Double 4.00mm nozzle",
|
||||
"FELIX Food Switch 4.00mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"31.22"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.1"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.75"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"1.5"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"6.0"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"648.0"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Thin Stainless Steel Syringe @0.50mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "I9W6tiEnRSMrkyzl",
|
||||
"filament_id": "OF40XIE8",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 0.50mm nozzle",
|
||||
"FELIX Food Double 0.50mm nozzle",
|
||||
"FELIX Food Switch 0.50mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"25.4"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.1"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.2"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"10.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"10.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"0.4"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"0.75"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"10.8"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Thin Stainless Steel Syringe @1.00mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "PJpJ8TTlDajNrRJo",
|
||||
"filament_id": "OF40XIE8",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 1.00mm nozzle",
|
||||
"FELIX Food Double 1.00mm nozzle",
|
||||
"FELIX Food Switch 1.00mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"25.4"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.1"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.2"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"10.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"10.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"0.4"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"1.5"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"40.5"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Thin Stainless Steel Syringe @2.00mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "s3GOL7BWdRbaV4GM",
|
||||
"filament_id": "OF40XIE8",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 2.00mm nozzle",
|
||||
"FELIX Food Double 2.00mm nozzle",
|
||||
"FELIX Food Switch 2.00mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"25.4"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.1"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.2"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"10.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"10.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"0.4"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"3.0"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"162.0"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Thin Stainless Steel Syringe @3.00mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "WKPEMCVctL0c5FFi",
|
||||
"filament_id": "OF40XIE8",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 3.00mm nozzle",
|
||||
"FELIX Food Double 3.00mm nozzle",
|
||||
"FELIX Food Switch 3.00mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"25.4"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.1"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.2"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"10.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"10.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"0.4"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"4.5"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"324.0"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Thin Stainless Steel Syringe @4.00mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "I5UEkm93zhn9hdMF",
|
||||
"filament_id": "OF40XIE8",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 4.00mm nozzle",
|
||||
"FELIX Food Double 4.00mm nozzle",
|
||||
"FELIX Food Switch 4.00mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"25.4"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.1"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.2"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"10.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"10.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"0.4"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"6.0"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"648.0"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Very Thick Stainless Steel Syringe @1.00mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "OIZKSwXaRY7WZecX",
|
||||
"filament_id": "OF0xT5HR",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 1.00mm nozzle",
|
||||
"FELIX Food Double 1.00mm nozzle",
|
||||
"FELIX Food Switch 1.00mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"25.4"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"2.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"4.0"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"0.75"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"13.5"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Very Thick Stainless Steel Syringe @2.00mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "al27KBjL9MAi3ri9",
|
||||
"filament_id": "OF0xT5HR",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 2.00mm nozzle",
|
||||
"FELIX Food Double 2.00mm nozzle",
|
||||
"FELIX Food Switch 2.00mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"25.4"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"2.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"4.0"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"1.5"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"53.0"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Very Thick Stainless Steel Syringe @3.00mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "42ADzpr7vGuh3AKC",
|
||||
"filament_id": "OF0xT5HR",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 3.00mm nozzle",
|
||||
"FELIX Food Double 3.00mm nozzle",
|
||||
"FELIX Food Switch 3.00mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"25.4"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"2.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"4.0"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"3.0"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"108.0"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Very Thick Stainless Steel Syringe @4.00mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "FpQC7Cf5qnW1E2QO",
|
||||
"filament_id": "OF0xT5HR",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 4.00mm nozzle",
|
||||
"FELIX Food Double 4.00mm nozzle",
|
||||
"FELIX Food Switch 4.00mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"25.4"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"2.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"4.0"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"4.5"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"216.0"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Very Thin Plastic Syringe @0.50mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "9OMbRBrVCyDD6A2k",
|
||||
"filament_id": "OF1XcHqz",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 0.50mm nozzle",
|
||||
"FELIX Food Double 0.50mm nozzle",
|
||||
"FELIX Food Switch 0.50mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"31.22"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.5"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.03"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"0.75"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"14.4"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Very Thin Plastic Syringe @1.00mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "ukd2jpvA1sHePEfs",
|
||||
"filament_id": "OF1XcHqz",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 1.00mm nozzle",
|
||||
"FELIX Food Double 1.00mm nozzle",
|
||||
"FELIX Food Switch 1.00mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"31.22"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.5"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.03"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"1.5"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"54.0"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Very Thin Plastic Syringe @2.00mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "jXkY0MPClCiaCJGC",
|
||||
"filament_id": "OF1XcHqz",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 2.00mm nozzle",
|
||||
"FELIX Food Double 2.00mm nozzle",
|
||||
"FELIX Food Switch 2.00mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"31.22"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.5"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.03"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"3.0"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"218.0"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Very Thin Plastic Syringe @3.00mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "jSTp7ePK9UKaNX3S",
|
||||
"filament_id": "OF1XcHqz",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 3.00mm nozzle",
|
||||
"FELIX Food Double 3.00mm nozzle",
|
||||
"FELIX Food Switch 3.00mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"31.22"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.5"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.03"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"4.5"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"432.0"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Very Thin Plastic Syringe @4.00mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "q3tLnporrSrlZl6S",
|
||||
"filament_id": "OF1XcHqz",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 4.00mm nozzle",
|
||||
"FELIX Food Double 4.00mm nozzle",
|
||||
"FELIX Food Switch 4.00mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"31.22"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.5"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.03"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"6.0"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"864.0"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Very Thin Stainless Steel Syringe @1.00mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "ZGtJ5dq6QEFrRzER",
|
||||
"filament_id": "OFJDz9xO",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 1.00mm nozzle",
|
||||
"FELIX Food Double 1.00mm nozzle",
|
||||
"FELIX Food Switch 1.00mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"25.4"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.96"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.1"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.03"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"0.2"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.03"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"1.5"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"54.0"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Very Thin Stainless Steel Syringe @2.00mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "il7EvApOb39ReoAt",
|
||||
"filament_id": "OFJDz9xO",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 2.00mm nozzle",
|
||||
"FELIX Food Double 2.00mm nozzle",
|
||||
"FELIX Food Switch 2.00mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"25.4"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.96"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.1"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.03"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"0.2"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.03"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"3.0"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"216.0"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Very Thin Stainless Steel Syringe @3.00mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "yTSl3aV0S2HD6zPy",
|
||||
"filament_id": "OFJDz9xO",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 3.00mm nozzle",
|
||||
"FELIX Food Double 3.00mm nozzle",
|
||||
"FELIX Food Switch 3.00mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"25.4"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.96"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.1"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.03"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"0.2"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.03"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"4.5"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"432.0"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Very Thin Stainless Steel Syringe @4.00mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "JfnwH4HjP0CQKuyr",
|
||||
"filament_id": "OFJDz9xO",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 4.00mm nozzle",
|
||||
"FELIX Food Double 4.00mm nozzle",
|
||||
"FELIX Food Switch 4.00mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"25.4"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.96"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.1"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.03"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"0.2"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.03"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"6.0"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"864.0"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Very Thin Stainless Steel Syringe @0.50mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "mIgwxwB2N67qAhxk",
|
||||
"filament_id": "OFASY29j",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 0.50mm nozzle",
|
||||
"FELIX Food Double 0.50mm nozzle",
|
||||
"FELIX Food Switch 0.50mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"25.4"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.96"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.1"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.03"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"0.2"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.03"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"0.75"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"14.4"
|
||||
]
|
||||
}
|
||||
+81
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "FELIX FLEX Brass @ 0.35mm",
|
||||
"inherits": "fdm_filament_flex",
|
||||
"from": "system",
|
||||
"setting_id": "UXX0sEaoqZvdXwi6",
|
||||
"filament_id": "OFF6vK3j",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Pro 3 0.35mm nozzle",
|
||||
"FELIX Pro L 3.0 0.35mm nozzle",
|
||||
"FELIX Pro XL 3.0 0.35mm nozzle",
|
||||
"FELIX Tec 4 0.35mm nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"215.0"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"215.0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"40.0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"40.0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"40.0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"40.0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"40.0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"40.0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"40.0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"40.0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"28.0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"120"
|
||||
],
|
||||
"filament_retract_length": [
|
||||
"2.2"
|
||||
],
|
||||
"filament_retract_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.05"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.38"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
]
|
||||
}
|
||||
+81
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "FELIX FLEX Brass @ 0.50mm",
|
||||
"inherits": "fdm_filament_flex",
|
||||
"from": "system",
|
||||
"setting_id": "B4AmHHxdvhsjN34a",
|
||||
"filament_id": "OFF6vK3j",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Pro 3 0.50mm nozzle",
|
||||
"FELIX Pro L 3.0 0.50mm nozzle",
|
||||
"FELIX Pro XL 3.0 0.50mm nozzle",
|
||||
"FELIX Tec 4 0.50mm nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"215.0"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"215.0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"40.0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"40.0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"40.0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"40.0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"40.0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"40.0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"40.0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"40.0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"28.0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"120"
|
||||
],
|
||||
"filament_retract_length": [
|
||||
"2.2"
|
||||
],
|
||||
"filament_retract_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.05"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.38"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
]
|
||||
}
|
||||
+81
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "FELIX FLEX Hardened Steel @ 0.25mm",
|
||||
"inherits": "fdm_filament_flex",
|
||||
"from": "system",
|
||||
"setting_id": "7z6rkaF5DBbiccZP",
|
||||
"filament_id": "OFSOY4F3",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Pro 3 0.25mm nozzle",
|
||||
"FELIX Pro L 3.0 0.25mm nozzle",
|
||||
"FELIX Pro XL 3.0 0.25mm nozzle",
|
||||
"FELIX Tec 4 0.25mm nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"225.0"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"225.0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"40.0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"40.0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"40.0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"40.0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"40.0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"40.0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"40.0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"40.0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"28.0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"120"
|
||||
],
|
||||
"filament_retract_length": [
|
||||
"2.2"
|
||||
],
|
||||
"filament_retract_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.05"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.38"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
]
|
||||
}
|
||||
+81
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "FELIX FLEX Hardened Steel @ 0.35mm",
|
||||
"inherits": "fdm_filament_flex",
|
||||
"from": "system",
|
||||
"setting_id": "DJRiMo6Aq0BvhFC9",
|
||||
"filament_id": "OFSOY4F3",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Pro 3 0.35mm nozzle",
|
||||
"FELIX Pro L 3.0 0.35mm nozzle",
|
||||
"FELIX Pro XL 3.0 0.35mm nozzle",
|
||||
"FELIX Tec 4 0.35mm nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"225.0"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"225.0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"40.0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"40.0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"40.0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"40.0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"40.0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"40.0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"40.0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"40.0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"28.0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"120"
|
||||
],
|
||||
"filament_retract_length": [
|
||||
"2.2"
|
||||
],
|
||||
"filament_retract_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.05"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.38"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
]
|
||||
}
|
||||
+81
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "FELIX FLEX Hardened Steel @ 0.50mm",
|
||||
"inherits": "fdm_filament_flex",
|
||||
"from": "system",
|
||||
"setting_id": "xgFrl1QpyQFFqBYz",
|
||||
"filament_id": "OFSOY4F3",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Pro 3 0.50mm nozzle",
|
||||
"FELIX Pro L 3.0 0.50mm nozzle",
|
||||
"FELIX Pro XL 3.0 0.50mm nozzle",
|
||||
"FELIX Tec 4 0.50mm nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"225.0"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"225.0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"40.0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"40.0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"40.0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"40.0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"40.0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"40.0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"40.0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"40.0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"28.0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"120"
|
||||
],
|
||||
"filament_retract_length": [
|
||||
"2.2"
|
||||
],
|
||||
"filament_retract_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.05"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.38"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
]
|
||||
}
|
||||
+81
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "FELIX FLEX Hardened Steel @ 0.70mm",
|
||||
"inherits": "fdm_filament_flex",
|
||||
"from": "system",
|
||||
"setting_id": "eZf8u1vzaQbsjyqO",
|
||||
"filament_id": "OFSOY4F3",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Pro 3 0.70mm nozzle",
|
||||
"FELIX Pro L 3.0 0.70mm nozzle",
|
||||
"FELIX Pro XL 3.0 0.70mm nozzle",
|
||||
"FELIX Tec 4 0.70mm nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"225.0"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"225.0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"40.0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"40.0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"40.0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"40.0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"40.0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"40.0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"40.0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"40.0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"28.0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"120"
|
||||
],
|
||||
"filament_retract_length": [
|
||||
"2.2"
|
||||
],
|
||||
"filament_retract_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.05"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.38"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
]
|
||||
}
|
||||
+81
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "FELIX PETG Brass @ 0.35mm",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"from": "system",
|
||||
"setting_id": "KZzk6aIxMvt1JlOR",
|
||||
"filament_id": "OF17qLwN",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Pro 3 0.35mm nozzle",
|
||||
"FELIX Pro L 3.0 0.35mm nozzle",
|
||||
"FELIX Pro XL 3.0 0.35mm nozzle",
|
||||
"FELIX Tec 4 0.35mm nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220.0"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220.0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"75.0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"75.0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"75.0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"75.0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"75.0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"75.0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"75.0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"75.0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"28.0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"120"
|
||||
],
|
||||
"filament_retract_length": [
|
||||
"1.2"
|
||||
],
|
||||
"filament_retract_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.05"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.27"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
]
|
||||
}
|
||||
+81
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "FELIX PETG Brass @ 0.50mm",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"from": "system",
|
||||
"setting_id": "RWPOGeCx1EEYeV8R",
|
||||
"filament_id": "OF17qLwN",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Pro 3 0.50mm nozzle",
|
||||
"FELIX Pro L 3.0 0.50mm nozzle",
|
||||
"FELIX Pro XL 3.0 0.50mm nozzle",
|
||||
"FELIX Tec 4 0.50mm nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220.0"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220.0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"75.0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"75.0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"75.0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"75.0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"75.0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"75.0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"75.0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"75.0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"28.0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"120"
|
||||
],
|
||||
"filament_retract_length": [
|
||||
"1.2"
|
||||
],
|
||||
"filament_retract_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.05"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.27"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
]
|
||||
}
|
||||
+81
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "FELIX PETG Hardened Steel @ 0.25mm",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"from": "system",
|
||||
"setting_id": "5RK6gGxFKyADXi4x",
|
||||
"filament_id": "OFQo5ZHk",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Pro 3 0.25mm nozzle",
|
||||
"FELIX Pro L 3.0 0.25mm nozzle",
|
||||
"FELIX Pro XL 3.0 0.25mm nozzle",
|
||||
"FELIX Tec 4 0.25mm nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"235.0"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"235.0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"75.0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"75.0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"75.0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"75.0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"75.0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"75.0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"75.0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"75.0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"28.0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"120"
|
||||
],
|
||||
"filament_retract_length": [
|
||||
"1.2"
|
||||
],
|
||||
"filament_retract_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.05"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.27"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
]
|
||||
}
|
||||
+81
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "FELIX PETG Hardened Steel @ 0.35mm",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"from": "system",
|
||||
"setting_id": "rz08j2cn8mlnvAxh",
|
||||
"filament_id": "OFQo5ZHk",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Pro 3 0.35mm nozzle",
|
||||
"FELIX Pro L 3.0 0.35mm nozzle",
|
||||
"FELIX Pro XL 3.0 0.35mm nozzle",
|
||||
"FELIX Tec 4 0.35mm nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"235.0"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"235.0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"75.0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"75.0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"75.0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"75.0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"75.0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"75.0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"75.0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"75.0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"28.0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"120"
|
||||
],
|
||||
"filament_retract_length": [
|
||||
"1.2"
|
||||
],
|
||||
"filament_retract_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.05"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.27"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
]
|
||||
}
|
||||
+81
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "FELIX PETG Hardened Steel @ 0.50mm",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"from": "system",
|
||||
"setting_id": "1xOwhrqAqJVO48d0",
|
||||
"filament_id": "OFQo5ZHk",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Pro 3 0.50mm nozzle",
|
||||
"FELIX Pro L 3.0 0.50mm nozzle",
|
||||
"FELIX Pro XL 3.0 0.50mm nozzle",
|
||||
"FELIX Tec 4 0.50mm nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"235.0"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"235.0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"75.0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"75.0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"75.0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"75.0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"75.0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"75.0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"75.0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"75.0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"28.0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"120"
|
||||
],
|
||||
"filament_retract_length": [
|
||||
"1.2"
|
||||
],
|
||||
"filament_retract_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.05"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.27"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
]
|
||||
}
|
||||
+81
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "FELIX PETG Hardened Steel @ 0.70mm",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"from": "system",
|
||||
"setting_id": "I2QXz0yDQN6ULNeF",
|
||||
"filament_id": "OFQo5ZHk",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Pro 3 0.70mm nozzle",
|
||||
"FELIX Pro L 3.0 0.70mm nozzle",
|
||||
"FELIX Pro XL 3.0 0.70mm nozzle",
|
||||
"FELIX Tec 4 0.70mm nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"235.0"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"235.0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"75.0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"75.0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"75.0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"75.0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"75.0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"75.0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"75.0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"75.0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"28.0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"120"
|
||||
],
|
||||
"filament_retract_length": [
|
||||
"1.2"
|
||||
],
|
||||
"filament_retract_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.05"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.27"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
]
|
||||
}
|
||||
+81
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "FELIX Premium PLA Brass @ 0.35mm",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "6Ax3SY7RI04PcFFJ",
|
||||
"filament_id": "OF8sLgrm",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Pro 3 0.35mm nozzle",
|
||||
"FELIX Pro L 3.0 0.35mm nozzle",
|
||||
"FELIX Pro XL 3.0 0.35mm nozzle",
|
||||
"FELIX Tec 4 0.35mm nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"190.0"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"190.0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"28.0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"120"
|
||||
],
|
||||
"filament_retract_length": [
|
||||
"1.4"
|
||||
],
|
||||
"filament_retract_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.05"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100.0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.22"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
]
|
||||
}
|
||||
+81
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "FELIX Premium PLA Brass @ 0.50mm",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "TzRWTEZl14IWlhrc",
|
||||
"filament_id": "OF8sLgrm",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Pro 3 0.50mm nozzle",
|
||||
"FELIX Pro L 3.0 0.50mm nozzle",
|
||||
"FELIX Pro XL 3.0 0.50mm nozzle",
|
||||
"FELIX Tec 4 0.50mm nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"190.0"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"190.0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"28.0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"120"
|
||||
],
|
||||
"filament_retract_length": [
|
||||
"1.4"
|
||||
],
|
||||
"filament_retract_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.05"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100.0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.22"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
]
|
||||
}
|
||||
+81
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "FELIX Premium PLA Hardened Steel @ 0.25mm",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "RtjX1Noxcsnv5cHv",
|
||||
"filament_id": "OFi00jWL",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Pro 3 0.25mm nozzle",
|
||||
"FELIX Pro L 3.0 0.25mm nozzle",
|
||||
"FELIX Pro XL 3.0 0.25mm nozzle",
|
||||
"FELIX Tec 4 0.25mm nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"205.0"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"205.0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"28.0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"120"
|
||||
],
|
||||
"filament_retract_length": [
|
||||
"1.4"
|
||||
],
|
||||
"filament_retract_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.05"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100.0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.22"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
]
|
||||
}
|
||||
+81
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "FELIX Premium PLA Hardened Steel @ 0.35mm",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "aQI8mIoLrX3liAlM",
|
||||
"filament_id": "OFi00jWL",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Pro 3 0.35mm nozzle",
|
||||
"FELIX Pro L 3.0 0.35mm nozzle",
|
||||
"FELIX Pro XL 3.0 0.35mm nozzle",
|
||||
"FELIX Tec 4 0.35mm nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"205.0"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"205.0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"28.0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"120"
|
||||
],
|
||||
"filament_retract_length": [
|
||||
"1.4"
|
||||
],
|
||||
"filament_retract_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.05"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100.0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.22"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
]
|
||||
}
|
||||
+81
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "FELIX Premium PLA Hardened Steel @ 0.50mm",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "pdnfmqbhfYXV8MAj",
|
||||
"filament_id": "OFi00jWL",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Pro 3 0.50mm nozzle",
|
||||
"FELIX Pro L 3.0 0.50mm nozzle",
|
||||
"FELIX Pro XL 3.0 0.50mm nozzle",
|
||||
"FELIX Tec 4 0.50mm nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"205.0"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"205.0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"28.0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"120"
|
||||
],
|
||||
"filament_retract_length": [
|
||||
"1.4"
|
||||
],
|
||||
"filament_retract_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.05"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100.0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.22"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
]
|
||||
}
|
||||
+81
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "FELIX Premium PLA Hardened Steel @ 0.70mm",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "BDxehnk3kKVRlysR",
|
||||
"filament_id": "OFi00jWL",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Pro 3 0.70mm nozzle",
|
||||
"FELIX Pro L 3.0 0.70mm nozzle",
|
||||
"FELIX Pro XL 3.0 0.70mm nozzle",
|
||||
"FELIX Tec 4 0.70mm nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"205.0"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"205.0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"28.0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"120"
|
||||
],
|
||||
"filament_retract_length": [
|
||||
"1.4"
|
||||
],
|
||||
"filament_retract_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.05"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100.0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.22"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
]
|
||||
}
|
||||
+81
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "FELIX Wood Brass @ 0.35mm",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "nRikN9oc1mOeA6dO",
|
||||
"filament_id": "OF7CzDzq",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Pro 3 0.35mm nozzle",
|
||||
"FELIX Pro L 3.0 0.35mm nozzle",
|
||||
"FELIX Pro XL 3.0 0.35mm nozzle",
|
||||
"FELIX Tec 4 0.35mm nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"185.0"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"185.0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"28.0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"120"
|
||||
],
|
||||
"filament_retract_length": [
|
||||
"2.5"
|
||||
],
|
||||
"filament_retract_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.15"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100.0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
]
|
||||
}
|
||||
+81
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "FELIX Wood Brass @ 0.50mm",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "SF4eGuHqUCtfEAGy",
|
||||
"filament_id": "OFKwdz3w",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Pro 3 0.50mm nozzle",
|
||||
"FELIX Pro L 3.0 0.50mm nozzle",
|
||||
"FELIX Pro XL 3.0 0.50mm nozzle",
|
||||
"FELIX Tec 4 0.50mm nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"185.0"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"185.0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"28.0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"120"
|
||||
],
|
||||
"filament_retract_length": [
|
||||
"2.5"
|
||||
],
|
||||
"filament_retract_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.15"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100.0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
]
|
||||
}
|
||||
+81
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "FELIX Wood Hardened Steel @ 0.25mm",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "AkZV2IjFVNLytIaY",
|
||||
"filament_id": "OFsMMDMp",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Pro 3 0.25mm nozzle",
|
||||
"FELIX Pro L 3.0 0.25mm nozzle",
|
||||
"FELIX Pro XL 3.0 0.25mm nozzle",
|
||||
"FELIX Tec 4 0.25mm nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"200.0"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"200.0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"28.0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"120"
|
||||
],
|
||||
"filament_retract_length": [
|
||||
"2.5"
|
||||
],
|
||||
"filament_retract_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.15"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100.0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
]
|
||||
}
|
||||
+81
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "FELIX Wood Hardened Steel @ 0.35mm",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "MEGMFP2nv59vZSpf",
|
||||
"filament_id": "OFsMMDMp",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Pro 3 0.35mm nozzle",
|
||||
"FELIX Pro L 3.0 0.35mm nozzle",
|
||||
"FELIX Pro XL 3.0 0.35mm nozzle",
|
||||
"FELIX Tec 4 0.35mm nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"200.0"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"200.0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"28.0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"120"
|
||||
],
|
||||
"filament_retract_length": [
|
||||
"2.5"
|
||||
],
|
||||
"filament_retract_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.15"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100.0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
]
|
||||
}
|
||||
+81
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "FELIX Wood Hardened Steel @ 0.50mm",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "ObSufa3ZQ8tUmJUB",
|
||||
"filament_id": "OFsMMDMp",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Pro 3 0.50mm nozzle",
|
||||
"FELIX Pro L 3.0 0.50mm nozzle",
|
||||
"FELIX Pro XL 3.0 0.50mm nozzle",
|
||||
"FELIX Tec 4 0.50mm nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"200.0"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"200.0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"28.0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"120"
|
||||
],
|
||||
"filament_retract_length": [
|
||||
"2.5"
|
||||
],
|
||||
"filament_retract_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.15"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100.0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
]
|
||||
}
|
||||
+81
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "FELIX Wood Hardened Steel @ 0.70mm",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "LCRYcNn6HN4lviM2",
|
||||
"filament_id": "OFsMMDMp",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Pro 3 0.70mm nozzle",
|
||||
"FELIX Pro L 3.0 0.70mm nozzle",
|
||||
"FELIX Pro XL 3.0 0.70mm nozzle",
|
||||
"FELIX Tec 4 0.70mm nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"200.0"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"200.0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"28.0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"120"
|
||||
],
|
||||
"filament_retract_length": [
|
||||
"2.5"
|
||||
],
|
||||
"filament_retract_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.15"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100.0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
]
|
||||
}
|
||||
+81
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "FORMFUTURA AppoloX ASA Brass @ 0.35mm",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"setting_id": "gRmosSxV2WFOgLAa",
|
||||
"filament_id": "OFEUX7D3",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Pro 3 0.35mm nozzle",
|
||||
"FELIX Pro L 3.0 0.35mm nozzle",
|
||||
"FELIX Pro XL 3.0 0.35mm nozzle",
|
||||
"FELIX Tec 4 0.35mm nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"235.0"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"235.0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"90.0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"90.0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"90.0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"90.0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"90.0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"90.0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"90.0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"90.0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"28.0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"140"
|
||||
],
|
||||
"filament_retract_length": [
|
||||
"1.4"
|
||||
],
|
||||
"filament_retract_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.96"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"40.0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"40.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.07"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FORMFUTURA"
|
||||
]
|
||||
}
|
||||
+81
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "FORMFUTURA AppoloX ASA Brass @ 0.50mm",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"setting_id": "iXdebkq6x0RsCLSh",
|
||||
"filament_id": "OFEUX7D3",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Pro 3 0.50mm nozzle",
|
||||
"FELIX Pro L 3.0 0.50mm nozzle",
|
||||
"FELIX Pro XL 3.0 0.50mm nozzle",
|
||||
"FELIX Tec 4 0.50mm nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"235.0"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"235.0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"90.0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"90.0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"90.0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"90.0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"90.0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"90.0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"90.0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"90.0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"28.0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"140"
|
||||
],
|
||||
"filament_retract_length": [
|
||||
"1.4"
|
||||
],
|
||||
"filament_retract_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.96"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"40.0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"40.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.07"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FORMFUTURA"
|
||||
]
|
||||
}
|
||||
+81
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "FORMFUTURA AppoloX ASA Hardened Steel @ 0.25mm",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"setting_id": "vDwvCcVTrlXsApST",
|
||||
"filament_id": "OFguQdOr",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Pro 3 0.25mm nozzle",
|
||||
"FELIX Pro L 3.0 0.25mm nozzle",
|
||||
"FELIX Pro XL 3.0 0.25mm nozzle",
|
||||
"FELIX Tec 4 0.25mm nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"245.0"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"245.0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"90.0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"90.0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"90.0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"90.0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"90.0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"90.0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"90.0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"90.0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"28.0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"140"
|
||||
],
|
||||
"filament_retract_length": [
|
||||
"1.4"
|
||||
],
|
||||
"filament_retract_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.96"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"40.0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"40.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.07"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FORMFUTURA"
|
||||
]
|
||||
}
|
||||
+81
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "FORMFUTURA AppoloX ASA Hardened Steel @ 0.35mm",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"setting_id": "WdP7DnbgAI8O4JOR",
|
||||
"filament_id": "OFguQdOr",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Pro 3 0.35mm nozzle",
|
||||
"FELIX Pro L 3.0 0.35mm nozzle",
|
||||
"FELIX Pro XL 3.0 0.35mm nozzle",
|
||||
"FELIX Tec 4 0.35mm nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"245.0"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"245.0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"90.0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"90.0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"90.0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"90.0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"90.0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"90.0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"90.0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"90.0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"28.0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"140"
|
||||
],
|
||||
"filament_retract_length": [
|
||||
"1.4"
|
||||
],
|
||||
"filament_retract_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.96"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"40.0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"40.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.07"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FORMFUTURA"
|
||||
]
|
||||
}
|
||||
+81
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "FORMFUTURA AppoloX ASA Hardened Steel @ 0.50mm",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"setting_id": "wwPIQoP8z2kiDq6c",
|
||||
"filament_id": "OFguQdOr",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Pro 3 0.50mm nozzle",
|
||||
"FELIX Pro L 3.0 0.50mm nozzle",
|
||||
"FELIX Pro XL 3.0 0.50mm nozzle",
|
||||
"FELIX Tec 4 0.50mm nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"245.0"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"245.0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"90.0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"90.0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"90.0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"90.0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"90.0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"90.0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"90.0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"90.0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"28.0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"140"
|
||||
],
|
||||
"filament_retract_length": [
|
||||
"1.4"
|
||||
],
|
||||
"filament_retract_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.96"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"40.0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"40.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.07"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FORMFUTURA"
|
||||
]
|
||||
}
|
||||
+81
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "FORMFUTURA AppoloX ASA Hardened Steel @ 0.70mm",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"setting_id": "pc50UjGaC3hGbzLo",
|
||||
"filament_id": "OFguQdOr",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Pro 3 0.70mm nozzle",
|
||||
"FELIX Pro L 3.0 0.70mm nozzle",
|
||||
"FELIX Pro XL 3.0 0.70mm nozzle",
|
||||
"FELIX Tec 4 0.70mm nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"245.0"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"245.0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"90.0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"90.0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"90.0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"90.0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"90.0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"90.0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"90.0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"90.0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"28.0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"140"
|
||||
],
|
||||
"filament_retract_length": [
|
||||
"1.4"
|
||||
],
|
||||
"filament_retract_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"40.0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"40.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.07"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FORMFUTURA"
|
||||
]
|
||||
}
|
||||
+81
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "FORMFUTURA Aquasolve PVA Brass @ 0.35mm",
|
||||
"inherits": "fdm_filament_pva",
|
||||
"from": "system",
|
||||
"setting_id": "BJplNxEdFo9WucQi",
|
||||
"filament_id": "OFumEwBr",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Pro 3 0.35mm nozzle",
|
||||
"FELIX Pro L 3.0 0.35mm nozzle",
|
||||
"FELIX Pro XL 3.0 0.35mm nozzle",
|
||||
"FELIX Tec 4 0.35mm nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"195.0"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"195.0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"28.0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"120"
|
||||
],
|
||||
"filament_retract_length": [
|
||||
"2.5"
|
||||
],
|
||||
"filament_retract_speed": [
|
||||
"55.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"55.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.2"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"40.0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"40.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.23"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FORMFUTURA"
|
||||
]
|
||||
}
|
||||
+81
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "FORMFUTURA Aquasolve PVA Brass @ 0.50mm",
|
||||
"inherits": "fdm_filament_pva",
|
||||
"from": "system",
|
||||
"setting_id": "EcGwm5A12REi6etq",
|
||||
"filament_id": "OFumEwBr",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Pro 3 0.50mm nozzle",
|
||||
"FELIX Pro L 3.0 0.50mm nozzle",
|
||||
"FELIX Pro XL 3.0 0.50mm nozzle",
|
||||
"FELIX Tec 4 0.50mm nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"195.0"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"195.0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"28.0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"120"
|
||||
],
|
||||
"filament_retract_length": [
|
||||
"2.5"
|
||||
],
|
||||
"filament_retract_speed": [
|
||||
"55.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"55.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.2"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"40.0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"40.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.23"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FORMFUTURA"
|
||||
]
|
||||
}
|
||||
+81
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "FORMFUTURA Aquasolve PVA Hardened Steel @ 0.25mm",
|
||||
"inherits": "fdm_filament_pva",
|
||||
"from": "system",
|
||||
"setting_id": "Dd4dc8lFUOaswJKt",
|
||||
"filament_id": "OFQ3GEWL",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Pro 3 0.25mm nozzle",
|
||||
"FELIX Pro L 3.0 0.25mm nozzle",
|
||||
"FELIX Pro XL 3.0 0.25mm nozzle",
|
||||
"FELIX Tec 4 0.25mm nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"205.0"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"205.0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"28.0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"120"
|
||||
],
|
||||
"filament_retract_length": [
|
||||
"2.5"
|
||||
],
|
||||
"filament_retract_speed": [
|
||||
"55.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"55.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.2"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"40.0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"40.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.23"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FORMFUTURA"
|
||||
]
|
||||
}
|
||||
+81
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "FORMFUTURA Aquasolve PVA Hardened Steel @ 0.35mm",
|
||||
"inherits": "fdm_filament_pva",
|
||||
"from": "system",
|
||||
"setting_id": "3JJ4fQmtK1Ukauyz",
|
||||
"filament_id": "OFQ3GEWL",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Pro 3 0.35mm nozzle",
|
||||
"FELIX Pro L 3.0 0.35mm nozzle",
|
||||
"FELIX Pro XL 3.0 0.35mm nozzle",
|
||||
"FELIX Tec 4 0.35mm nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"205.0"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"205.0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"28.0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"120"
|
||||
],
|
||||
"filament_retract_length": [
|
||||
"2.5"
|
||||
],
|
||||
"filament_retract_speed": [
|
||||
"55.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"55.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.2"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"40.0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"40.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.23"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FORMFUTURA"
|
||||
]
|
||||
}
|
||||
+81
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "FORMFUTURA Aquasolve PVA Hardened Steel @ 0.50mm",
|
||||
"inherits": "fdm_filament_pva",
|
||||
"from": "system",
|
||||
"setting_id": "K8AI1KXSsESZvmOI",
|
||||
"filament_id": "OFQ3GEWL",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Pro 3 0.50mm nozzle",
|
||||
"FELIX Pro L 3.0 0.50mm nozzle",
|
||||
"FELIX Pro XL 3.0 0.50mm nozzle",
|
||||
"FELIX Tec 4 0.50mm nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"205.0"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"205.0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"28.0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"120"
|
||||
],
|
||||
"filament_retract_length": [
|
||||
"2.5"
|
||||
],
|
||||
"filament_retract_speed": [
|
||||
"55.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"55.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.2"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"40.0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"40.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.23"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FORMFUTURA"
|
||||
]
|
||||
}
|
||||
+81
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "FORMFUTURA Aquasolve PVA Hardened Steel @ 0.70mm",
|
||||
"inherits": "fdm_filament_pva",
|
||||
"from": "system",
|
||||
"setting_id": "zd6mqKKTLROAclKj",
|
||||
"filament_id": "OFQ3GEWL",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Pro 3 0.70mm nozzle",
|
||||
"FELIX Pro L 3.0 0.70mm nozzle",
|
||||
"FELIX Pro XL 3.0 0.70mm nozzle",
|
||||
"FELIX Tec 4 0.70mm nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"205.0"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"205.0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"28.0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"120"
|
||||
],
|
||||
"filament_retract_length": [
|
||||
"2.5"
|
||||
],
|
||||
"filament_retract_speed": [
|
||||
"55.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"55.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.2"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"40.0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"40.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.23"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FORMFUTURA"
|
||||
]
|
||||
}
|
||||
Some files were not shown because too many files have changed in this diff Show More
Reference in New Issue
Block a user