Draw the Preview's Toolpath Segments From an Index Buffer

The preview's frame cost is dominated by one call: a single instanced draw of every visible toolpath segment. On a tall multi-filament print the wipe tower supplies most of those segments, which is why the preview of a large tower is slow and why shrinking the layer range speeds it up again. That draw is not fill bound. Shrinking the model to about a fortieth of its screen area moved the frame from 419 ms to 401 ms, so the cost is per segment, not per pixel, and it is paid in the vertex shader: five texelFetch calls plus several cross/normalize per invocation. Each segment is a box of eight corners, but it was submitted with glDrawArraysInstanced over a 24 entry array, so every corner was transformed once per triangle that touches it and the shader ran 24 times per segment. The same 24 entries are now an element buffer over the eight distinct corners, which lets the post-transform cache reuse them and drops the shader to 8 runs per segment. The triangles, their winding and the vertex_id each corner receives are unchanged. Measured over 100 frames on the 636-layer, 351k-vertex three-filament fixture, the segment draw goes from 381 ms to 322 ms per frame. That is a software rasterizer, where triangle setup dominates and understates the win; the drop in shader invocations is the transferable part. Verified by loading the same project in this build and in a build of the parent commit and comparing the canvas across three states - the default view, a rotated camera, and a reduced layer range: pixel identical in all three. The rotated case matters because the shader picks its corner offsets from the camera direction. The only pixels that differ anywhere on screen are in the G-code text panel, which prints a per-process object id that varies between any two runs.
Answer the Preview's Per-Frame Time Query From a Cached Sum
2026-09-25 01:40:57 +00:00 · 2026-09-23 00:40:22 +08:00 · 2026-09-23 00:40:04 +08:00
1019 changed files with 7156 additions and 19218 deletions
@@ -413,14 +413,6 @@ jobs:
        GH_TOKEN: ${{ github.token }}
      run: |
        api="$GITHUB_API_URL/repos/$GITHUB_REPOSITORY/actions/caches"
-        # The save step reports success even when its tar failed, so keep
-        # the older entries unless the new one is listed.
-        if ! curl -sSf -H "Authorization: Bearer $GH_TOKEN" \
-            "$api?ref=$GITHUB_REF&key=$CCACHE_ENTRY" \
-            | jq -e --arg entry "$CCACHE_ENTRY" 'any(.actions_caches[]; .key == $entry)' > /dev/null; then
-          echo "$CCACHE_ENTRY was not saved; keeping the older entries."
-          exit 0
-        fi
        curl -sSf -H "Authorization: Bearer $GH_TOKEN" \
          "$api?ref=$GITHUB_REF&key=ccache-$CCACHE_LEG-&per_page=100" \
          | jq -r --arg prefix "ccache-$CCACHE_LEG-" --argjson run "$GITHUB_RUN_ID" \
@@ -798,13 +798,6 @@ jobs:
        env:
          GH_TOKEN: ${{ github.token }}
        run: |
-          # The save step reports success even when its tar failed, so keep
-          # the older entries unless the new one is listed.
-          if ! gh cache list --ref "$GITHUB_REF" --key "$CCACHE_ENTRY" --json key \
-              | jq -e --arg entry "$CCACHE_ENTRY" 'any(.[]; .key == $entry)' > /dev/null; then
-            echo "$CCACHE_ENTRY was not saved; keeping the older entries."
-            exit 0
-          fi
          gh cache list --ref "$GITHUB_REF" --key "ccache-$CCACHE_LEG-" --limit 100 --json id,key \
            | jq -r --arg prefix "ccache-$CCACHE_LEG-" --argjson run "$GITHUB_RUN_ID" \
                '.[] | select((.key | ltrimstr($prefix) | split("-")[0] | tonumber?) < $run) | .id' \
@@ -5,9 +5,8 @@
 #             re-sliced on its own to see whether it changes the G-code
 #   harness - the GUI-vs-CLI parity harness (metrics only, never fails)
 # Both test the latest successful build_all.yml Linux AppImage from main, with
-# sources checked out at the commit that build was made from; a manual run can
-# name another branch, or pin one build by its run id. Nothing here gates a
-# build or a PR.
+# sources checked out at the commit that build was made from. Nothing here
+# gates a build or a PR.
 name: Parity Nightly

 on:
@@ -21,13 +20,9 @@ on:
        required: false
        default: "main"
      build_branch:
-        description: "branch whose newest successful build_all artifact to test (a PR build is the PR merged into its base; sources are checked out at the PR head)"
+        description: "branch whose latest successful build_all artifact to test"
        required: false
        default: "main"
-      build_run_id:
-        description: "build_all run id to test instead of build_branch's newest (same PR caveat)"
-        required: false
-        default: ""
      fixtures:
        description: "harness fixture ids, space-separated (empty = all)"
        required: false
@@ -55,53 +50,14 @@ jobs:
        env:
          GH_TOKEN: ${{ github.token }}
          GH_REPO: ${{ github.repository }}
-          BRANCH: ${{ inputs.build_branch || 'main' }}
-          RUN_ID: ${{ inputs.build_run_id }}
-          SCHEDULED: ${{ github.event_name == 'schedule' }}
        run: |
          set -euo pipefail
-          if [ -n "$RUN_ID" ]; then
-            [[ $RUN_ID =~ ^[0-9]+$ ]] || { echo "build_run_id must be a numeric run id, got '$RUN_ID'" >&2; exit 1; }
-            # a pinned build is read directly, not through a search; it must come
-            # from this repository, because the later jobs check out its commit here
-            found=$(gh api "repos/$GH_REPO/actions/runs/$RUN_ID" --jq \
-              'select(.path == ".github/workflows/build_all.yml" and .conclusion == "success"
-                      and .head_repository.full_name == env.GH_REPO)
-               | "\(.id) \(.head_sha) \(.created_at)"')
-            [ -n "$found" ] || { echo "run $RUN_ID is not a successful build_all run of $GH_REPO" >&2; exit 1; }
-          else
-            # GitHub serves filtered run listings (branch=, status=, head_sha=, ...)
-            # from a search index that has returned weeks-old results, while the
-            # unfiltered listing stays current, so list unfiltered and filter here.
-            # The repository check keeps out fork PRs whose branch has the same
-            # name. A feature branch is normally built only for its PR, and a PR
-            # build compiles the PR merged into its base rather than head_sha, so
-            # a build of the branch itself (push or dispatch) is preferred when
-            # the same page has one.
-            pick='([.workflow_runs[] | select(.head_branch == env.BRANCH and .conclusion == "success"
-                    and .head_repository.full_name == env.GH_REPO)]
-                   | map(select(.event != "pull_request"))[0] // .[0])
-                  | select(.) | "\(.id) \(.head_sha) \(.created_at)"'
-            # a page of 100 runs spans about a day and a half; a manual run may
-            # target a branch that last built weeks ago
-            pages=3
-            if [ "$SCHEDULED" != true ]; then pages=20; fi
-            found=""
-            for page in $(seq "$pages"); do
-              found=$(gh api "repos/$GH_REPO/actions/workflows/build_all.yml/runs?per_page=100&page=$page" --jq "$pick")
-              if [ -n "$found" ]; then break; fi
-            done
-            [ -n "$found" ] || { echo "no successful $BRANCH build among the last $((pages * 100)) build_all runs; pass build_run_id to test an older one" >&2; exit 1; }
-          fi
-          read -r run_id head_sha created <<< "$found"
-          # the nightly fails rather than report on a stale build
-          if [ "$SCHEDULED" = true ] && [ $(( $(date +%s) - $(date -d "$created" +%s) )) -gt 172800 ]; then
-            echo "newest $BRANCH build $run_id is from $created, over 48 hours old" >&2
-            exit 1
-          fi
-          printf 'run_id=%s\nhead_sha=%s\n' "$run_id" "$head_sha" >> "$GITHUB_OUTPUT"
+          gh run list --workflow build_all.yml \
+            --branch "${{ inputs.build_branch || 'main' }}" \
+            --status success --limit 1 --json databaseId,headSha \
+            --jq '"run_id=\(.[0].databaseId)\nhead_sha=\(.[0].headSha)"' \
+            >> "$GITHUB_OUTPUT"
          cat "$GITHUB_OUTPUT"
-          echo "Testing build [$run_id](https://github.com/$GH_REPO/actions/runs/$run_id) of \`$head_sha\`, built $created" >> "$GITHUB_STEP_SUMMARY"

  effect:
    name: Override sweep effect stage (shard ${{ matrix.shard }})
@@ -1,220 +0,0 @@
-# Deferred Page Construction: High Level Design
-
-## Why it exists
-
-The main window is a notebook of tabs. When the first frame appears, one tab is on
-screen and the others are not; some of them are opened later in the session, some
-never, and some only exist for certain printers. Building a tab before the first frame
-adds its cost to every startup, whether or not the tab is used.
-
-This subsystem builds a tab's panel the first time the tab is shown. It also builds the
-remaining tabs while the user is idle after startup, in units of tens of milliseconds,
-so a click that lands in the middle of one waits for that unit and no longer. Startup
-pays only for what the first frame shows, and the other tabs are usually built before
-anyone opens them.
-
-## The parts
-
-`src/slic3r/GUI/Lazy.hpp`, `LazyPage.hpp`, `StagedBuild.hpp` and `IdleScheduler.hpp/.cpp`
-(with its wx-free `PrebuildQueue.hpp`) are independent. A holder can hold anything a
-factory makes, a page is a holder with a placeholder widget, a staged object can live
-outside a holder, and the scheduler knows none of them; it runs tasks, which `MainFrame`
-makes from the holders.
-
-### Lazy<T>: the holder
-
-Holds an object that a factory makes on first use, under a name for the log and a place
-in the idle queue, both given by the owner. The header has no wx dependency; the busy
-cursor for an on-demand build lives in `Lazy.cpp` and is skipped when there is no app,
-so the holder is unit-tested.
-
- `get()` is null until the object is completely built; `built()` says the same.
- `ensure()` builds whatever is left now, under a busy cursor, and returns the object, or
-  null in the two cases below. A click on an unbuilt tab or a first open of a dialog goes
-  through this, and it logs the units and time it took.
- `build_step()` runs one unit of construction and returns true while more remain. The
-  first unit is the factory call, and each later unit is one `StagedBuild` step if the
-  type has them.
- `when_built(fn)` runs `fn(object)` now if it exists, otherwise once it is built.
- `pending()` says whether the idle prebuild has work here: not built, and the factory
-  has not returned null. A null factory result is logged and the holder stays unbuilt.
- A unit that pumps the event loop cannot re-enter the holder; a nested `build_step()`
-  does nothing and a nested `ensure()` returns null.
- After a unit throws, the holder and the scheduler still run the next one.
-
-The holder does not own the object; its wx parent does, as for any window. A type with
-one instance in the app derives from `LazyInstance<T>`, which points at that instance's
-holder (the holder registers itself, and a recreated `MainFrame`'s holder replaces the
-old frame's) and gives the type the static entry points the rest of the app uses,
-`T::if_built()`, `T::ensure()` and `T::when_built(fn)`. They return null, or do
-nothing, while no holder exists, so a caller needs no `mainframe` check.
-
-`built()` is an atomic flag, since a job worker reads it through the statics
-(`MainFrame::get_calibration_curr_tab()`); it is set after the object is complete.
-
-`LazyBase` is the holder's type-free interface (`name()`, `built()`, `pending()`,
-`build_step()`, `prebuild_order()`) and is what the scheduler side sees.
-
-### LazyPage<Panel>: the placeholder
-
-A `wxPanel` placed in the parent in place of the real panel, and a `Lazy<Panel>` whose
-factory makes the panel inside it (by default `new Panel(parent)`). The notebook needs a
-page object for the tab to exist and for `show_device()` to insert and remove tabs by
-pointer, and the placeholder is that object. `MainFrame` creates every page once, named
-after its `TAB_ID_*`, and keeps it for the frame's life; `show_device()` only moves
-pages in and out of the book.
-
- `Show()` is forwarded to the panel, so a panel's own `Show()` override stays its
-  activation hook (refresh timers, machine sync) and `SelectPageByName()` works
-  unchanged. A show builds the panel unless the frame itself is still hidden, because
-  the book selects its first page as it is inserted; `MainFrame::Show()` shows the
-  current page again when the frame becomes visible, which builds it.
- `in_book()` says whether the parent notebook currently lists the page, and
-  `pending()` is that and not built, so a tab `show_device()` has taken out of the book
-  is not prebuilt.
- A panel built while its page is hidden stays hidden, and a completed panel gets the
-  dark-mode pass the frame ran before it existed.
-
-The Compare presets dialog is a holder without a page. `MainFrame` keeps a
-`Lazy<DiffPresetDialog>` whose factory constructs the dialog and binds its events, the
-dialog derives from `LazyInstance`, and its callers use
-`DiffPresetDialog::ensure()->show()` and `DiffPresetDialog::if_built()` like a tab's
-callers do. Saving a preset refreshes the dialog only while it is shown, since `show()`
-reloads the presets.
-
-### StagedBuild: construction in units
-
-A mixin for a panel whose constructor is too big to be one unit. The constructor builds
-the skeleton (sizers, and the parts other code may touch) and queues the rest with
-`add_build_step()`. `build_step()` runs one step, and `add_build_steps_of(child)`
-forwards a child's steps so a nested panel is spread the same way; the parent is built
-only once the child is, including steps the child queues later. Steps run in order, on
-the main thread. A `Lazy<T>` recognises a staged type at compile time and runs its steps
-one per unit.
-
-Nothing may touch what a step builds before the last step has run. In practice:
-
- nothing paints the panel before it is complete, since a panel built at idle is hidden
-  with its page and one built on demand finishes inside `ensure()` before the event loop
-  runs again;
- members created in steps are initialised to null in the header, so a partially built
-  panel can be destroyed;
- timers and event handlers that use step content check `built()` first
-  (`MonitorPanel::update_all()`, `CalibrationPanel::update_all()`), and a child's steps
-  are queued before anything in the constructor can fire such a handler;
- a destructor that disconnects from step content checks `built()` first;
- a constructor or step does not take focus while the panel is off screen
-  (`IsShownOnScreen()` before `SetFocus()`), since it may run while the user is typing
-  elsewhere;
- where a step's widgets must keep their place in a sizer that later steps also fill, the
-  constructor adds an empty slot sizer in that position and the step fills the slot
-  (`StatusBasePanel`).
-
-### IdleScheduler: when to build
-
-A task is any `LazyBase`: a name for the log, `pending()`, `build_step()` and
-`prebuild_order()`. `PrebuildQueue` holds the tasks by order (equal order in the order
-added) and runs a slice, the units of the first pending task until it completes, the
-budget is spent on the clock it is given, or the interrupt predicate says input arrived.
-It has no wx dependency and is unit-tested with a fake clock. A task whose work is gone
-is passed over and stays in the queue, so a tab that `show_device()` removes and later
-re-inserts is pending again.
-
-`IdleScheduler` drives the queue with the real clock, the app's input timestamp and the
-Windows queue check, and logs each unit and slice. Each slice is a timer message: a
-period of 250 ms while waiting for the user to go quiet, and a one-shot of zero after a
-slice that left work, so the event loop dispatches whatever it has queued (paint,
-timers, input) before the next slice runs. Chaining slices with `CallAfter` would not do
-this: wx drains pending events fully before the next native message, on every platform.
-On GTK the one-shot is 5 ms, because a due GLib timeout runs ahead of the redraw and
-idle sources that paint and deliver posted events.
-A slice runs only once the user has been idle for the quiet time, and the timer stops
-itself once no task is pending. The tick period, quiet time and slice length are
-constants in `IdleScheduler.cpp`. A unit cannot be interrupted once started, so the
-largest unit bounds click latency on Windows; on the other platforms a click also waits
-for the rest of the slice. A unit that pumps the event loop lets the timer fire inside
-its own slice, and that tick does nothing.
-
-The tasks are made by their owners. `MainFrame::prebuild_pages_when_idle()` registers
-every `LazyPage` the frame created, in or out of the book (`pending()` is false for a
-page out of the book), the Compare presets holder, and the Prepare sidebar's settings
-page from `ParamsPanel::settings_page_prebuild()`, whose first unit selects the default
-tab if none is selected yet and whose later units build one option group each.
-`show_device()` only restarts the timer. `MainFrame` owns the scheduler because it owns
-everything the tasks build, and clearing the queue with the frame is what keeps a task
-from outliving its object.
-
-Idle time comes from `GUI_App::FilterEvent`, which timestamps mouse and keyboard events
-(`wxEVT_CATEGORY_USER_INPUT` minus command events, which all claim that category), and
-`GUI_App::input_idle_ms()` reports it. On Windows a slice additionally refuses to start
-when the message queue holds keyboard, button, touch or pen input. Mouse moves are
-excluded because Windows synthesises one whenever a window appears under the cursor,
-which every unit does. Other platforms use the timestamp alone.
-
-Once every registered page is built the timer is stopped and the subsystem costs
-nothing.
-
-## Rules
-
-**What builds before the first frame.** The Prepare tab's plater, because `post_init()`
-needs its GL canvas on screen to initialise OpenGL in every startup state, and the start
-page the user configured. Home is built by the first `MainFrame::Show()`, Prepare's
-settings page by selecting the tab. `post_init()` passes through the Prepare tab for GL
-init under `Freeze()` with `MainFrame::select_prepare_for_gl_init()`, which changes the
-selection without the page-changed event, so nothing else is built for that pass.
-
-**Reaching a lazy object.** A caller uses the type's own statics. `T::if_built()` may
-return null and is for telling the object something it can live without (a rescale, a
-colour change, a status update). `T::ensure()` builds the object and is for navigating
-to it or for a caller that is about to show it. A caller that tells the object something
-it would not fetch for itself on construction uses `T::when_built()`, which keeps the
-message until the object exists. A panel that pulls its state when constructed (the Home
-page requests the recent list on load, the Device tab reads the device manager on show)
-is reached with `if_built()`; one that cannot pull gets `when_built()`.
-
-**Unit size.** A unit cannot be interrupted, so it should stay within the slice length on
-a fast machine. A constructor above that is staged. A single widget above it is the
-floor unless the widget itself is split.
-
-**Order.** Cheapest and most likely to be opened first, given where `MainFrame` creates
-each holder. The settings page is 0 (the Prepare tab's own content), Home 10, Device 20
-(a Bambu user's usual second stop), Calibration 30, Multi-device 40, the web Device
-view 50, Project 60 (a second WebView2 instance) and the Compare presets dialog 100;
-steps of ten so a new tab takes a value between its neighbours without renumbering
-them. `MainFrame::prebuild_pages_when_idle()` registers the tasks once, from
-`post_init()`.
-
-**Never prebuilt.** A holder with a negative order, for a tab that few sessions open
-and that costs more to build unasked than it saves (the Design tab), and plugin-provided
-tabs, which are Python-side and not lazy pages.
-
-## Adopting it
-
-A lazy tab needs:
-
-1. The panel derived from `LazyInstance<Panel>`, since a tab's panel has one instance.
-2. A `LazyPage<Panel>*` member in `MainFrame`, created once in `init_tabpanel()` with
-   its `TAB_ID_*` as the name, its place by the order rule (and a factory if
-   `new Panel(parent)` is not enough), added to `m_lazy_pages`, and used wherever the
-   tab is added to or looked up in the notebook.
-3. Every use of the panel outside `MainFrame` going through one of the panel's statics,
-   chosen by the rule above. When converting an existing member, `grep` for it; the
-   compiler finds the rest.
-4. A constructor that copes with the frame already existing and the user being busy
-   elsewhere, since `wxGetApp().mainframe` is set, the frame may be shown, and the user
-   may be typing when a lazy panel is built: no `SetFocus()` while off screen, and
-   whatever the constructor did through a `MainFrame` accessor before (a mode update, a
-   deferred URL) done in the constructor itself.
-
-To stage a heavy constructor, inherit `StagedBuild`, keep the skeleton in the constructor,
-move the rest into `add_build_step()` lambdas in the original order, and follow the
-staged-panel rules above. Measure the units. A step that is still one big widget has to
-be split inside that widget or accepted as the floor.
-
-Verification is by log. `MainFrame::prebuild_pages_when_idle` lists the queue it
-registered, `IdleScheduler::tick` reports each completed task by name at info level and
-each slice and unit at debug level, and `Lazy::ensure` reports an object a user built
-on demand with the units and time it took. A run from the configured start
-page shows every registered page complete, in order, with no unit longer than intended.
-A click on a tab mid-prebuild shows the finished panel with an `ensure` line for what was
-left, and the slices resume for the remaining tasks once the user is idle again.
@@ -3,7 +3,7 @@
 	"name": "AliZ PA-CF @P1-X1",
 	"inherits": "AliZ PA-CF @base",
 	"from": "system",
-	"setting_id": "cN0uesF0mZf3KSkj",
+	"setting_id": "AliZ003_00",
 	"instantiation": "true",
 	"enable_pressure_advance": [
 		"1"
@@ -3,7 +3,7 @@
 	"name": "AliZ PETG @P1-X1",
 	"inherits": "AliZ PETG @base",
 	"from": "system",
-	"setting_id": "cZp23cC4ong9q6dn",
+	"setting_id": "AliZ001_00",
 	"instantiation": "true",
 	"enable_pressure_advance": [
 		"1"
@@ -3,7 +3,7 @@
 	"name": "AliZ PETG-CF @P1-X1",
 	"inherits": "AliZ PETG-CF @base",
 	"from": "system",
-	"setting_id": "HWW5mejsB0SfEfWw",
+	"setting_id": "AZ01-1_00",
 	"instantiation": "true",
 	"enable_pressure_advance": [
 		"1"
@@ -3,7 +3,7 @@
 	"name": "AliZ PETG-Metal @P1-X1",
 	"inherits": "AliZ PETG-Metal @base",
 	"from": "system",
-	"setting_id": "JqD0blE4fxaNfXqB",
+	"setting_id": "AZ01-2_00",
 	"instantiation": "true",
 	"enable_pressure_advance": [
 		"1"
@@ -3,7 +3,7 @@
 	"name": "AliZ PLA @P1-X1",
 	"inherits": "AliZ PLA @base",
 	"from": "system",
-	"setting_id": "fRELapY8YiP4qrBW",
+	"setting_id": "AliZ002_00",
 	"instantiation": "true",
 	"enable_pressure_advance": [
 		"1"
@@ -3,7 +3,7 @@
 	"name": "BETA ABS @BBL A1",
 	"inherits": "BETA ABS @base",
 	"from": "system",
-	"setting_id": "dUGRrmxU89pRaJ2Z",
+	"setting_id": "BABB00_07",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"20"
@@ -3,7 +3,7 @@
 	"name": "BETA ABS @BBL H2D",
 	"inherits": "BETA ABS @base",
 	"from": "system",
-	"setting_id": "oxZKTEMd8TpyoH39",
+	"setting_id": "BABB00_11",
 	"instantiation": "true",
 	"chamber_temperatures": [
 		"65"
@@ -3,7 +3,7 @@
 	"name": "BETA ABS @BBL P1P",
 	"inherits": "BETA ABS @base",
 	"from": "system",
-	"setting_id": "MPYyfCKMsJZy8GaY",
+	"setting_id": "BABB00_03",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"20"
@@ -3,7 +3,7 @@
 	"name": "BETA ABS @BBL X1C",
 	"inherits": "BETA ABS @base",
 	"from": "system",
-	"setting_id": "vMA7EhgNDT4MwMRr",
+	"setting_id": "BABB00",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"60"
@@ -0,0 +1,21 @@
+{
+	"type": "filament",
+	"name": "BETA ABS @base",
+	"inherits": "fdm_filament_abs",
+	"from": "system",
+	"filament_id": "OFjUXn67",
+	"instantiation": "false",
+	"description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
+	"filament_cost": [
+		"24.99"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_vendor": [
+		"BETA"
+	],
+	"impact_strength_z": [
+		"7.4"
+	]
+}
@@ -3,7 +3,7 @@
 	"name": "BETA ASA @BBL A1 0.4 nozzle",
 	"inherits": "BETA ASA @base",
 	"from": "system",
-	"setting_id": "LevRG7t9mTlEseaB",
+	"setting_id": "BASB00_09",
 	"instantiation": "true",
 	"chamber_temperatures": [
 		"60"
@@ -3,7 +3,7 @@
 	"name": "BETA ASA @BBL H2D 0.4 nozzle",
 	"inherits": "BETA ASA @base",
 	"from": "system",
-	"setting_id": "3NBkWTXmqi8eRUhi",
+	"setting_id": "BASB00_13",
 	"instantiation": "true",
 	"chamber_temperatures": [
 		"65"
@@ -3,7 +3,7 @@
 	"name": "BETA ASA @BBL X1C 0.4 nozzle",
 	"inherits": "BETA ASA @base",
 	"from": "system",
-	"setting_id": "0nWTEZkH7NKXgCib",
+	"setting_id": "BASB00_02",
 	"instantiation": "true",
 	"chamber_temperatures": [
 		"60"
@@ -53,53 +53,5 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"100"
-	],
-	"activate_air_filtration": [
-		"1"
-	],
-	"close_additional_fan_first_x_layers": [
-		"3"
-	],
-	"retraction_distances_when_ec": [
-		"0"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"temperature_vitrification": [
-		"100"
-	],
-	"filament_start_gcode": [
-		"; Filament gcode\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n\n"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0"
-	],
-	"filament_adhesiveness_category": [
-		"200"
-	],
-	"filament_dev_ams_drying_time": [
-		"12",
-		"8.0",
-		"12",
-		"8.0"
-	],
-	"filament_dev_ams_drying_heat_distortion_temperature": [
-		"100"
-	],
-	"filament_dev_drying_cooling_temperature": [
-		"85"
-	],
-	"filament_dev_ams_drying_temperature": [
-		"65",
-		"80",
-		"65",
-		"80"
-	],
-	"filament_dev_drying_softening_temperature": [
-		"85"
 	]
 }
@@ -3,7 +3,7 @@
 	"name": "BETA HIPS @BBL H2D",
 	"inherits": "BETA HIPS @base",
 	"from": "system",
-	"setting_id": "9nN2uWxlYH1c507A",
+	"setting_id": "BHIB00_06",
 	"instantiation": "true",
 	"filament_deretraction_speed": [
 		"nil",
@@ -3,7 +3,7 @@
 	"name": "BETA HIPS @BBL X1C",
 	"inherits": "BETA HIPS @base",
 	"from": "system",
-	"setting_id": "mTcT8sCciWyX5enc",
+	"setting_id": "BHIB00_00",
 	"instantiation": "true",
 	"filament_max_volumetric_speed": [
 		"8",
@@ -0,0 +1,14 @@
+{
+	"type": "filament",
+	"name": "BETA HIPS @base",
+	"inherits": "fdm_filament_hips",
+	"from": "system",
+	"filament_id": "OFlmxlDG",
+	"instantiation": "false",
+	"filament_is_support": [
+		"1"
+	],
+	"filament_vendor": [
+		"BETA"
+	]
+}
@@ -3,7 +3,7 @@
 	"name": "BETA PAHT-CF @BBL H2D",
 	"inherits": "BETA PAHT-CF @base",
 	"from": "system",
-	"setting_id": "YbYCVQd5IR0sQR8S",
+	"setting_id": "BPAB00_01",
 	"instantiation": "true",
 	"chamber_temperatures": [
 		"60"
@@ -3,7 +3,7 @@
 	"name": "BETA PAHT-CF @BBL P1P",
 	"inherits": "BETA PAHT-CF @base",
 	"from": "system",
-	"setting_id": "5O5fzmFrT3O1k1H0",
+	"setting_id": "BPAB00_10",
 	"instantiation": "true",
 	"filament_flow_ratio": [
 		"0.96",
@@ -3,7 +3,7 @@
 	"name": "BETA PAHT-CF @BBL X1C",
 	"inherits": "BETA PAHT-CF @base",
 	"from": "system",
-	"setting_id": "gB5HLYTDCooFy2W5",
+	"setting_id": "BPAB00",
 	"instantiation": "true",
 	"chamber_temperatures": [
 		"60"
@@ -0,0 +1,48 @@
+{
+	"type": "filament",
+	"name": "BETA PAHT-CF @base",
+	"inherits": "fdm_filament_pa",
+	"from": "system",
+	"filament_id": "OF6qw3Wb",
+	"instantiation": "false",
+	"description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
+	"fan_cooling_layer_time": [
+		"5"
+	],
+	"fan_max_speed": [
+		"30"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"filament_cost": [
+		"94.99"
+	],
+	"filament_density": [
+		"1.06"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_type": [
+		"PA-CF"
+	],
+	"filament_vendor": [
+		"BETA"
+	],
+	"full_fan_speed_layer": [
+		"2"
+	],
+	"impact_strength_z": [
+		"13.3"
+	],
+	"overhang_fan_speed": [
+		"40"
+	],
+	"overhang_fan_threshold": [
+		"0%"
+	],
+	"temperature_vitrification": [
+		"180"
+	]
+}
@@ -3,7 +3,7 @@
 	"name": "BETA PEBA 90A @BBL A1",
 	"inherits": "BETA PEBA 90A @base",
 	"from": "system",
-	"setting_id": "A57Sbar56Ah1NiU7",
+	"setting_id": "BPBB00_04",
 	"instantiation": "true",
 	"filament_density": [
 		"1.22"
@@ -3,7 +3,7 @@
 	"name": "BETA PEBA 90A @BBL A1M",
 	"inherits": "BETA PEBA 90A @base",
 	"from": "system",
-	"setting_id": "OoLkWS147R0AasZc",
+	"setting_id": "BPBB00_05",
 	"instantiation": "true",
 	"filament_density": [
 		"1.22"
@@ -3,7 +3,7 @@
 	"name": "BETA PEBA 90A @BBL H2D",
 	"inherits": "BETA PEBA 90A @base",
 	"from": "system",
-	"setting_id": "91b8WTzvOky9wAVK",
+	"setting_id": "BPBB00_02",
 	"instantiation": "true",
 	"additional_cooling_fan_speed": [
 		"100"
@@ -3,7 +3,7 @@
 	"name": "BETA PEBA 90A @BBL P1P",
 	"inherits": "BETA PEBA 90A @base",
 	"from": "system",
-	"setting_id": "ydudEBLRmj1WSXqB",
+	"setting_id": "BPBB00_01",
 	"instantiation": "true",
 	"filament_max_volumetric_speed": [
 		"2.8",
@@ -3,7 +3,7 @@
 	"name": "BETA PEBA 90A @BBL X1C",
 	"inherits": "BETA PEBA 90A @base",
 	"from": "system",
-	"setting_id": "F1hTal3M92tBjv2N",
+	"setting_id": "BPBB00_00",
 	"instantiation": "true",
 	"filament_max_volumetric_speed": [
 		"2.8",
@@ -0,0 +1,33 @@
+{
+	"type": "filament",
+	"name": "BETA PEBA 90A @base",
+	"inherits": "fdm_filament_tpu",
+	"from": "system",
+	"filament_id": "OFI2MKy7",
+	"instantiation": "false",
+	"description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.",
+	"filament_cost": [
+		"59.99"
+	],
+	"filament_max_volumetric_speed": [
+		"2.8"
+	],
+	"filament_vendor": [
+		"BETA"
+	],
+	"impact_strength_z": [
+		"87.3"
+	],
+	"nozzle_temperature": [
+		"225"
+	],
+	"nozzle_temperature_initial_layer": [
+		"225"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"slow_down_layer_time": [
+		"14"
+	]
+}
@@ -3,7 +3,7 @@
 	"name": "BETA PETG @BBL A1",
 	"inherits": "BETA PETG @base",
 	"from": "system",
-	"setting_id": "EpYzxZwVHvLaseku",
+	"setting_id": "BPGB00_06",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"50"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG @BBL A1M 0.4 nozzle",
 	"inherits": "BETA PETG @base",
 	"from": "system",
-	"setting_id": "5V0hyhzFoDU8Tfwm",
+	"setting_id": "BPGB00_03",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"50"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG @BBL H2D 0.4 nozzle",
 	"inherits": "BETA PETG @base",
 	"from": "system",
-	"setting_id": "KnKvUsD4rSpQU413",
+	"setting_id": "BPGB00_09",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"30"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG @BBL X1C",
 	"inherits": "BETA PETG @base",
 	"from": "system",
-	"setting_id": "uM6wHdt0N5ftZRge",
+	"setting_id": "BPGB00_01",
 	"instantiation": "true",
 	"fan_min_speed": [
 		"20"
@@ -92,48 +92,5 @@
 	],
 	"filament_start_gcode": [
 		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-	],
-	"close_additional_fan_first_x_layers": [
-		"3"
-	],
-	"retraction_distances_when_ec": [
-		"0"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n\n"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0"
-	],
-	"filament_adhesiveness_category": [
-		"300"
-	],
-	"filament_dev_chamber_drying_bed_temperature": [
-		"80"
-	],
-	"filament_dev_ams_drying_time": [
-		"12",
-		"12",
-		"12",
-		"12"
-	],
-	"filament_dev_ams_drying_ams_limitations": [
-		"1",
-		"0"
-	],
-	"filament_dev_ams_drying_heat_distortion_temperature": [
-		"75"
-	],
-	"filament_dev_drying_cooling_temperature": [
-		"55"
-	],
-	"filament_dev_ams_drying_temperature": [
-		"65",
-		"65",
-		"55",
-		"55"
-	],
-	"filament_dev_drying_softening_temperature": [
-		"60"
 	]
 }
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Fluorescence @BBL A1",
 	"inherits": "BETA PETG Fluorescence @base",
 	"from": "system",
-	"setting_id": "ZtyTtAWsZnLGsM0O",
+	"setting_id": "BPGB02_06",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"50"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Fluorescence @BBL A1M 0.4 nozzle",
 	"inherits": "BETA PETG Fluorescence @base",
 	"from": "system",
-	"setting_id": "VUSunTT0OJa7iOSd",
+	"setting_id": "BPGB02_03",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"50"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Fluorescence @BBL H2D 0.4 nozzle",
 	"inherits": "BETA PETG Fluorescence @base",
 	"from": "system",
-	"setting_id": "JHg4y0pxAOtoJSuw",
+	"setting_id": "BPGB02_09",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"30"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Fluorescence @BBL X1C",
 	"inherits": "BETA PETG Fluorescence @base",
 	"from": "system",
-	"setting_id": "pCetfFvyLLw3vS2j",
+	"setting_id": "BPGB02_01",
 	"instantiation": "true",
 	"fan_min_speed": [
 		"20"
@@ -92,48 +92,5 @@
 	],
 	"filament_start_gcode": [
 		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-	],
-	"close_additional_fan_first_x_layers": [
-		"3"
-	],
-	"retraction_distances_when_ec": [
-		"0"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n\n"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0"
-	],
-	"filament_adhesiveness_category": [
-		"300"
-	],
-	"filament_dev_chamber_drying_bed_temperature": [
-		"80"
-	],
-	"filament_dev_ams_drying_time": [
-		"12",
-		"12",
-		"12",
-		"12"
-	],
-	"filament_dev_ams_drying_ams_limitations": [
-		"1",
-		"0"
-	],
-	"filament_dev_ams_drying_heat_distortion_temperature": [
-		"75"
-	],
-	"filament_dev_drying_cooling_temperature": [
-		"55"
-	],
-	"filament_dev_ams_drying_temperature": [
-		"65",
-		"65",
-		"55",
-		"55"
-	],
-	"filament_dev_drying_softening_temperature": [
-		"60"
 	]
 }
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Glitter @BBL A1",
 	"inherits": "BETA PETG Glitter @base",
 	"from": "system",
-	"setting_id": "cz5dC7OrXDlX1Ctj",
+	"setting_id": "BPGB03_06",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"50"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Glitter @BBL A1M 0.4 nozzle",
 	"inherits": "BETA PETG Glitter @base",
 	"from": "system",
-	"setting_id": "PozWnOfZ2l7HqTpx",
+	"setting_id": "BPGB03_03",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"50"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Glitter @BBL H2D 0.4 nozzle",
 	"inherits": "BETA PETG Glitter @base",
 	"from": "system",
-	"setting_id": "ijW4zvNAQ3DIK984",
+	"setting_id": "BPGB03_09",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"30"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Glitter @BBL X1C",
 	"inherits": "BETA PETG Glitter @base",
 	"from": "system",
-	"setting_id": "UI220qldPoLY8VZN",
+	"setting_id": "BPGB03_01",
 	"instantiation": "true",
 	"fan_min_speed": [
 		"20"
@@ -92,48 +92,5 @@
 	],
 	"filament_start_gcode": [
 		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-	],
-	"close_additional_fan_first_x_layers": [
-		"3"
-	],
-	"retraction_distances_when_ec": [
-		"0"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n\n"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0"
-	],
-	"filament_adhesiveness_category": [
-		"300"
-	],
-	"filament_dev_chamber_drying_bed_temperature": [
-		"80"
-	],
-	"filament_dev_ams_drying_time": [
-		"12",
-		"12",
-		"12",
-		"12"
-	],
-	"filament_dev_ams_drying_ams_limitations": [
-		"1",
-		"0"
-	],
-	"filament_dev_ams_drying_heat_distortion_temperature": [
-		"75"
-	],
-	"filament_dev_drying_cooling_temperature": [
-		"55"
-	],
-	"filament_dev_ams_drying_temperature": [
-		"65",
-		"65",
-		"55",
-		"55"
-	],
-	"filament_dev_drying_softening_temperature": [
-		"60"
 	]
 }
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Glow @BBL A1",
 	"inherits": "BETA PETG Glow @base",
 	"from": "system",
-	"setting_id": "LudMQeiSJOLw0Aoy",
+	"setting_id": "BPGB04_06",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"50"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Glow @BBL A1M 0.4 nozzle",
 	"inherits": "BETA PETG Glow @base",
 	"from": "system",
-	"setting_id": "cl1Rl9hgrahhhSd3",
+	"setting_id": "BPGB04_03",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"50"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Glow @BBL H2D 0.4 nozzle",
 	"inherits": "BETA PETG Glow @base",
 	"from": "system",
-	"setting_id": "3s9w3mH6M4OdbrUV",
+	"setting_id": "BPGB04_09",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"30"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Glow @BBL X1C",
 	"inherits": "BETA PETG Glow @base",
 	"from": "system",
-	"setting_id": "wv5FRKdnsHaIFA7L",
+	"setting_id": "BPGB04_01",
 	"instantiation": "true",
 	"fan_min_speed": [
 		"20"
@@ -92,48 +92,5 @@
 	],
 	"filament_start_gcode": [
 		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-	],
-	"close_additional_fan_first_x_layers": [
-		"3"
-	],
-	"retraction_distances_when_ec": [
-		"0"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n\n"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0"
-	],
-	"filament_adhesiveness_category": [
-		"300"
-	],
-	"filament_dev_chamber_drying_bed_temperature": [
-		"80"
-	],
-	"filament_dev_ams_drying_time": [
-		"12",
-		"12",
-		"12",
-		"12"
-	],
-	"filament_dev_ams_drying_ams_limitations": [
-		"1",
-		"0"
-	],
-	"filament_dev_ams_drying_heat_distortion_temperature": [
-		"75"
-	],
-	"filament_dev_drying_cooling_temperature": [
-		"55"
-	],
-	"filament_dev_ams_drying_temperature": [
-		"65",
-		"65",
-		"55",
-		"55"
-	],
-	"filament_dev_drying_softening_temperature": [
-		"60"
 	]
 }
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Gradient @BBL A1",
 	"inherits": "BETA PETG Gradient @base",
 	"from": "system",
-	"setting_id": "L3hZggzEZUgUv0Qv",
+	"setting_id": "BPGB05_06",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"50"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Gradient @BBL A1M 0.4 nozzle",
 	"inherits": "BETA PETG Gradient @base",
 	"from": "system",
-	"setting_id": "zsITnsNFRG7IE6sR",
+	"setting_id": "BPGB05_03",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"50"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Gradient @BBL H2D 0.4 nozzle",
 	"inherits": "BETA PETG Gradient @base",
 	"from": "system",
-	"setting_id": "GqmCuPg6baUxeoYS",
+	"setting_id": "BPGB05_09",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"30"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Gradient @BBL X1C",
 	"inherits": "BETA PETG Gradient @base",
 	"from": "system",
-	"setting_id": "oYJjUiaCI4UBZ0ur",
+	"setting_id": "BPGB05_01",
 	"instantiation": "true",
 	"fan_min_speed": [
 		"20"
@@ -92,48 +92,5 @@
 	],
 	"filament_start_gcode": [
 		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-	],
-	"close_additional_fan_first_x_layers": [
-		"3"
-	],
-	"retraction_distances_when_ec": [
-		"0"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n\n"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0"
-	],
-	"filament_adhesiveness_category": [
-		"300"
-	],
-	"filament_dev_chamber_drying_bed_temperature": [
-		"80"
-	],
-	"filament_dev_ams_drying_time": [
-		"12",
-		"12",
-		"12",
-		"12"
-	],
-	"filament_dev_ams_drying_ams_limitations": [
-		"1",
-		"0"
-	],
-	"filament_dev_ams_drying_heat_distortion_temperature": [
-		"75"
-	],
-	"filament_dev_drying_cooling_temperature": [
-		"55"
-	],
-	"filament_dev_ams_drying_temperature": [
-		"65",
-		"65",
-		"55",
-		"55"
-	],
-	"filament_dev_drying_softening_temperature": [
-		"60"
 	]
 }
@@ -3,7 +3,7 @@
 	"name": "BETA PETG HF @BBL A1",
 	"inherits": "BETA PETG HF @base",
 	"from": "system",
-	"setting_id": "T2Ea25pM2u9BM7Oa",
+	"setting_id": "BPGB06_03",
 	"instantiation": "true",
 	"fan_cooling_layer_time": [
 		"15"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG HF @BBL A1M",
 	"inherits": "BETA PETG HF @base",
 	"from": "system",
-	"setting_id": "nO5R86dkDle1m5Pq",
+	"setting_id": "BPGB06_06",
 	"instantiation": "true",
 	"fan_cooling_layer_time": [
 		"15"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG HF @BBL H2D 0.4 nozzle",
 	"inherits": "BETA PETG HF @base",
 	"from": "system",
-	"setting_id": "YOBguayM9PiwkpfT",
+	"setting_id": "BPGB06_09",
 	"instantiation": "true",
 	"counter_coef_2": [
 		"0.007"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG HF @BBL X1C",
 	"inherits": "BETA PETG HF @base",
 	"from": "system",
-	"setting_id": "EG3h0IHVO1yyVNMs",
+	"setting_id": "BPGB06_00",
 	"instantiation": "true",
 	"fan_cooling_layer_time": [
 		"20"
@@ -85,48 +85,5 @@
 	],
 	"filament_start_gcode": [
 		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-	],
-	"close_additional_fan_first_x_layers": [
-		"3"
-	],
-	"retraction_distances_when_ec": [
-		"0"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n\n"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0"
-	],
-	"filament_adhesiveness_category": [
-		"300"
-	],
-	"filament_dev_chamber_drying_bed_temperature": [
-		"80"
-	],
-	"filament_dev_ams_drying_time": [
-		"12",
-		"12",
-		"12",
-		"12"
-	],
-	"filament_dev_ams_drying_ams_limitations": [
-		"1",
-		"0"
-	],
-	"filament_dev_ams_drying_heat_distortion_temperature": [
-		"75"
-	],
-	"filament_dev_drying_cooling_temperature": [
-		"55"
-	],
-	"filament_dev_ams_drying_temperature": [
-		"65",
-		"65",
-		"55",
-		"55"
-	],
-	"filament_dev_drying_softening_temperature": [
-		"60"
 	]
 }
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Heat Color Change @BBL A1",
 	"inherits": "BETA PETG Heat Color Change @base",
 	"from": "system",
-	"setting_id": "ZhHASdXFywqbRuBf",
+	"setting_id": "BPGB01_06",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"50"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Heat Color Change @BBL A1M 0.4 nozzle",
 	"inherits": "BETA PETG Heat Color Change @base",
 	"from": "system",
-	"setting_id": "YiFgzCJDAOW9YSjZ",
+	"setting_id": "BPGB01_03",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"50"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Heat Color Change @BBL H2D 0.4 nozzle",
 	"inherits": "BETA PETG Heat Color Change @base",
 	"from": "system",
-	"setting_id": "DpWgpTiKdm70Xt1i",
+	"setting_id": "BPGB01_09",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"30"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Heat Color Change @BBL X1C",
 	"inherits": "BETA PETG Heat Color Change @base",
 	"from": "system",
-	"setting_id": "3lJe6ftSHQDkQZ1S",
+	"setting_id": "BPGB01_01",
 	"instantiation": "true",
 	"fan_min_speed": [
 		"20"
@@ -92,48 +92,5 @@
 	],
 	"filament_start_gcode": [
 		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-	],
-	"close_additional_fan_first_x_layers": [
-		"3"
-	],
-	"retraction_distances_when_ec": [
-		"0"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n\n"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0"
-	],
-	"filament_adhesiveness_category": [
-		"300"
-	],
-	"filament_dev_chamber_drying_bed_temperature": [
-		"80"
-	],
-	"filament_dev_ams_drying_time": [
-		"12",
-		"12",
-		"12",
-		"12"
-	],
-	"filament_dev_ams_drying_ams_limitations": [
-		"1",
-		"0"
-	],
-	"filament_dev_ams_drying_heat_distortion_temperature": [
-		"75"
-	],
-	"filament_dev_drying_cooling_temperature": [
-		"55"
-	],
-	"filament_dev_ams_drying_temperature": [
-		"65",
-		"65",
-		"55",
-		"55"
-	],
-	"filament_dev_drying_softening_temperature": [
-		"60"
 	]
 }
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Marble @BBL A1",
 	"inherits": "BETA PETG Marble @base",
 	"from": "system",
-	"setting_id": "tSCDuE4dE44PyIwb",
+	"setting_id": "BPGB07_06",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"50"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Marble @BBL A1M 0.4 nozzle",
 	"inherits": "BETA PETG Marble @base",
 	"from": "system",
-	"setting_id": "n6dguOo5ZleD6Ec4",
+	"setting_id": "BPGB07_03",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"50"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Marble @BBL H2D 0.4 nozzle",
 	"inherits": "BETA PETG Marble @base",
 	"from": "system",
-	"setting_id": "RxCTxdvym4iNOB5j",
+	"setting_id": "BPGB07_09",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"30"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Marble @BBL X1C",
 	"inherits": "BETA PETG Marble @base",
 	"from": "system",
-	"setting_id": "3BgsPAgilo1MgtOV",
+	"setting_id": "BPGB07_01",
 	"instantiation": "true",
 	"fan_min_speed": [
 		"20"
@@ -92,48 +92,5 @@
 	],
 	"filament_start_gcode": [
 		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-	],
-	"close_additional_fan_first_x_layers": [
-		"3"
-	],
-	"retraction_distances_when_ec": [
-		"0"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n\n"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0"
-	],
-	"filament_adhesiveness_category": [
-		"300"
-	],
-	"filament_dev_chamber_drying_bed_temperature": [
-		"80"
-	],
-	"filament_dev_ams_drying_time": [
-		"12",
-		"12",
-		"12",
-		"12"
-	],
-	"filament_dev_ams_drying_ams_limitations": [
-		"1",
-		"0"
-	],
-	"filament_dev_ams_drying_heat_distortion_temperature": [
-		"75"
-	],
-	"filament_dev_drying_cooling_temperature": [
-		"55"
-	],
-	"filament_dev_ams_drying_temperature": [
-		"65",
-		"65",
-		"55",
-		"55"
-	],
-	"filament_dev_drying_softening_temperature": [
-		"60"
 	]
 }
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Matte @BBL A1",
 	"inherits": "BETA PETG Matte @base",
 	"from": "system",
-	"setting_id": "zYkrzQk11C98R31F",
+	"setting_id": "BPGB08_06",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"50"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Matte @BBL A1M 0.4 nozzle",
 	"inherits": "BETA PETG Matte @base",
 	"from": "system",
-	"setting_id": "rzX5oP4037Ex5Chh",
+	"setting_id": "BPGB08_03",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"50"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Matte @BBL H2D 0.4 nozzle",
 	"inherits": "BETA PETG Matte @base",
 	"from": "system",
-	"setting_id": "sqz8Vluq7GMd3siv",
+	"setting_id": "BPGB08_09",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"30"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Matte @BBL X1C",
 	"inherits": "BETA PETG Matte @base",
 	"from": "system",
-	"setting_id": "NXgqYCqHeVCgFF3I",
+	"setting_id": "BPGB08_01",
 	"instantiation": "true",
 	"fan_min_speed": [
 		"20"
@@ -92,48 +92,5 @@
 	],
 	"filament_start_gcode": [
 		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-	],
-	"close_additional_fan_first_x_layers": [
-		"3"
-	],
-	"retraction_distances_when_ec": [
-		"0"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n\n"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0"
-	],
-	"filament_adhesiveness_category": [
-		"300"
-	],
-	"filament_dev_chamber_drying_bed_temperature": [
-		"80"
-	],
-	"filament_dev_ams_drying_time": [
-		"12",
-		"12",
-		"12",
-		"12"
-	],
-	"filament_dev_ams_drying_ams_limitations": [
-		"1",
-		"0"
-	],
-	"filament_dev_ams_drying_heat_distortion_temperature": [
-		"75"
-	],
-	"filament_dev_drying_cooling_temperature": [
-		"55"
-	],
-	"filament_dev_ams_drying_temperature": [
-		"65",
-		"65",
-		"55",
-		"55"
-	],
-	"filament_dev_drying_softening_temperature": [
-		"60"
 	]
 }
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Metallic @BBL A1",
 	"inherits": "BETA PETG Metallic @base",
 	"from": "system",
-	"setting_id": "1baUIJ3P8n6DcyRc",
+	"setting_id": "BPGB09_06",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"50"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Metallic @BBL A1M 0.4 nozzle",
 	"inherits": "BETA PETG Metallic @base",
 	"from": "system",
-	"setting_id": "LMsVDqsChBksLNqL",
+	"setting_id": "BPGB09_03",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"50"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Metallic @BBL H2D 0.4 nozzle",
 	"inherits": "BETA PETG Metallic @base",
 	"from": "system",
-	"setting_id": "giq8BW6qcwz91e4C",
+	"setting_id": "BPGB09_09",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"30"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Metallic @BBL X1C",
 	"inherits": "BETA PETG Metallic @base",
 	"from": "system",
-	"setting_id": "tZzoc2LdgWkpEiox",
+	"setting_id": "BPGB09_01",
 	"instantiation": "true",
 	"fan_min_speed": [
 		"20"
@@ -92,48 +92,5 @@
 	],
 	"filament_start_gcode": [
 		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-	],
-	"close_additional_fan_first_x_layers": [
-		"3"
-	],
-	"retraction_distances_when_ec": [
-		"0"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n\n"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0"
-	],
-	"filament_adhesiveness_category": [
-		"300"
-	],
-	"filament_dev_chamber_drying_bed_temperature": [
-		"80"
-	],
-	"filament_dev_ams_drying_time": [
-		"12",
-		"12",
-		"12",
-		"12"
-	],
-	"filament_dev_ams_drying_ams_limitations": [
-		"1",
-		"0"
-	],
-	"filament_dev_ams_drying_heat_distortion_temperature": [
-		"75"
-	],
-	"filament_dev_drying_cooling_temperature": [
-		"55"
-	],
-	"filament_dev_ams_drying_temperature": [
-		"65",
-		"65",
-		"55",
-		"55"
-	],
-	"filament_dev_drying_softening_temperature": [
-		"60"
 	]
 }
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Transparent @BBL A1",
 	"inherits": "BETA PETG Transparent @base",
 	"from": "system",
-	"setting_id": "86loYV5S4bgO2FOx",
+	"setting_id": "BPGB10_05",
 	"instantiation": "true",
 	"filament_long_retractions_when_cut": [
 		"1"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Transparent @BBL A1M",
 	"inherits": "BETA PETG Transparent @base",
 	"from": "system",
-	"setting_id": "c2xTYO07RC2G2xsv",
+	"setting_id": "BPGB10_02",
 	"instantiation": "true",
 	"filament_long_retractions_when_cut": [
 		"1"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Transparent @BBL H2D 0.4 nozzle",
 	"inherits": "BETA PETG Transparent @base",
 	"from": "system",
-	"setting_id": "GkC5T0RX0meiLVKg",
+	"setting_id": "BPGB10_06",
 	"instantiation": "true",
 	"filament_deretraction_speed": [
 		"nil",
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Transparent @BBL X1C",
 	"inherits": "BETA PETG Transparent @base",
 	"from": "system",
-	"setting_id": "doyjzbrEn9akgjvG",
+	"setting_id": "BPGB10_00",
 	"instantiation": "true",
 	"filament_long_retractions_when_cut": [
 		"1",
@@ -80,48 +80,5 @@
 	],
 	"filament_start_gcode": [
 		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-	],
-	"close_additional_fan_first_x_layers": [
-		"3"
-	],
-	"retraction_distances_when_ec": [
-		"0"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n\n"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0"
-	],
-	"filament_adhesiveness_category": [
-		"300"
-	],
-	"filament_dev_chamber_drying_bed_temperature": [
-		"80"
-	],
-	"filament_dev_ams_drying_time": [
-		"12",
-		"12",
-		"12",
-		"12"
-	],
-	"filament_dev_ams_drying_ams_limitations": [
-		"1",
-		"0"
-	],
-	"filament_dev_ams_drying_heat_distortion_temperature": [
-		"75"
-	],
-	"filament_dev_drying_cooling_temperature": [
-		"55"
-	],
-	"filament_dev_ams_drying_temperature": [
-		"65",
-		"65",
-		"55",
-		"55"
-	],
-	"filament_dev_drying_softening_temperature": [
-		"60"
 	]
 }
@@ -3,7 +3,7 @@
 	"name": "BETA PETG UV Color Change @BBL A1",
 	"inherits": "BETA PETG UV Color Change @base",
 	"from": "system",
-	"setting_id": "CeepF0rRLZ5fzBwm",
+	"setting_id": "BPGB11_06",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"50"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG UV Color Change @BBL A1M 0.4 nozzle",
 	"inherits": "BETA PETG UV Color Change @base",
 	"from": "system",
-	"setting_id": "Atb1esrVdoWBK97e",
+	"setting_id": "BPGB11_03",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"50"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG UV Color Change @BBL H2D 0.4 nozzle",
 	"inherits": "BETA PETG UV Color Change @base",
 	"from": "system",
-	"setting_id": "Ic0NUfwLmR0NSh5q",
+	"setting_id": "BPGB11_09",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"30"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG UV Color Change @BBL X1C",
 	"inherits": "BETA PETG UV Color Change @base",
 	"from": "system",
-	"setting_id": "BUKCpukEUmocfz3v",
+	"setting_id": "BPGB11_01",
 	"instantiation": "true",
 	"fan_min_speed": [
 		"20"
@@ -92,48 +92,5 @@
 	],
 	"filament_start_gcode": [
 		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-	],
-	"close_additional_fan_first_x_layers": [
-		"3"
-	],
-	"retraction_distances_when_ec": [
-		"0"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n\n"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0"
-	],
-	"filament_adhesiveness_category": [
-		"300"
-	],
-	"filament_dev_chamber_drying_bed_temperature": [
-		"80"
-	],
-	"filament_dev_ams_drying_time": [
-		"12",
-		"12",
-		"12",
-		"12"
-	],
-	"filament_dev_ams_drying_ams_limitations": [
-		"1",
-		"0"
-	],
-	"filament_dev_ams_drying_heat_distortion_temperature": [
-		"75"
-	],
-	"filament_dev_drying_cooling_temperature": [
-		"55"
-	],
-	"filament_dev_ams_drying_temperature": [
-		"65",
-		"65",
-		"55",
-		"55"
-	],
-	"filament_dev_drying_softening_temperature": [
-		"60"
 	]
 }
@@ -3,7 +3,7 @@
 	"name": "BETA PETG-CF @BBL A1 0.4 nozzle",
 	"inherits": "BETA PETG-CF @base",
 	"from": "system",
-	"setting_id": "2ysJdw1MuW8VLmny",
+	"setting_id": "BPGB12_05",
 	"instantiation": "true",
 	"fan_cooling_layer_time": [
 		"30"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG-CF @BBL A1M 0.4 nozzle",
 	"inherits": "BETA PETG-CF @base",
 	"from": "system",
-	"setting_id": "eZsa6noZZUahQeBp",
+	"setting_id": "BPGB12_04",
 	"instantiation": "true",
 	"filament_max_volumetric_speed": [
 		"9"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG-CF @BBL H2D 0.4 nozzle",
 	"inherits": "BETA PETG-CF @base",
 	"from": "system",
-	"setting_id": "YRUDQs5jE1d1BGTY",
+	"setting_id": "BPGB12_08",
 	"instantiation": "true",
 	"counter_coef_2": [
 		"0.00565"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG-CF @BBL P1P 0.4 nozzle",
 	"inherits": "BETA PETG-CF @base",
 	"from": "system",
-	"setting_id": "i1OjgC3I96a1Trb8",
+	"setting_id": "BPGB12_03",
 	"instantiation": "true",
 	"fan_cooling_layer_time": [
 		"30"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG-CF @BBL X1C 0.4 nozzle",
 	"inherits": "BETA PETG-CF @base",
 	"from": "system",
-	"setting_id": "0p4213iz0b9fbeKO",
+	"setting_id": "BPGB12_02",
 	"instantiation": "true",
 	"fan_cooling_layer_time": [
 		"30"
@@ -79,48 +79,5 @@
 	],
 	"filament_start_gcode": [
 		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-	],
-	"close_additional_fan_first_x_layers": [
-		"3"
-	],
-	"retraction_distances_when_ec": [
-		"0"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n\n"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0"
-	],
-	"filament_adhesiveness_category": [
-		"300"
-	],
-	"filament_dev_chamber_drying_bed_temperature": [
-		"80"
-	],
-	"filament_dev_ams_drying_time": [
-		"12",
-		"12",
-		"12",
-		"12"
-	],
-	"filament_dev_ams_drying_ams_limitations": [
-		"1",
-		"0"
-	],
-	"filament_dev_ams_drying_heat_distortion_temperature": [
-		"75"
-	],
-	"filament_dev_drying_cooling_temperature": [
-		"55"
-	],
-	"filament_dev_ams_drying_temperature": [
-		"65",
-		"65",
-		"55",
-		"55"
-	],
-	"filament_dev_drying_softening_temperature": [
-		"60"
 	]
 }
@@ -3,7 +3,7 @@
 	"name": "BETA PETG-GF @BBL A1 0.4 nozzle",
 	"inherits": "BETA PETG-GF @base",
 	"from": "system",
-	"setting_id": "mUZlODC7TvISFthv",
+	"setting_id": "BPGB13_05",
 	"instantiation": "true",
 	"fan_cooling_layer_time": [
 		"30"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG-GF @BBL A1M 0.4 nozzle",
 	"inherits": "BETA PETG-GF @base",
 	"from": "system",
-	"setting_id": "9Rh7EvY3QZm07VNe",
+	"setting_id": "BPGB13_04",
 	"instantiation": "true",
 	"filament_max_volumetric_speed": [
 		"9"
--- a/Show More
+++ b/Show More