Draw the Preview's Toolpath Segments From an Index Buffer

The preview's frame cost is dominated by one call: a single instanced draw of every visible toolpath segment. On a tall multi-filament print the wipe tower supplies most of those segments, which is why the preview of a large tower is slow and why shrinking the layer range speeds it up again. That draw is not fill bound. Shrinking the model to about a fortieth of its screen area moved the frame from 419 ms to 401 ms, so the cost is per segment, not per pixel, and it is paid in the vertex shader: five texelFetch calls plus several cross/normalize per invocation. Each segment is a box of eight corners, but it was submitted with glDrawArraysInstanced over a 24 entry array, so every corner was transformed once per triangle that touches it and the shader ran 24 times per segment. The same 24 entries are now an element buffer over the eight distinct corners, which lets the post-transform cache reuse them and drops the shader to 8 runs per segment. The triangles, their winding and the vertex_id each corner receives are unchanged. Measured over 100 frames on the 636-layer, 351k-vertex three-filament fixture, the segment draw goes from 381 ms to 322 ms per frame. That is a software rasterizer, where triangle setup dominates and understates the win; the drop in shader invocations is the transferable part. Verified by loading the same project in this build and in a build of the parent commit and comparing the canvas across three states - the default view, a rotated camera, and a reduced layer range: pixel identical in all three. The rotated case matters because the shader picks its corner offsets from the camera direction. The only pixels that differ anywhere on screen are in the G-code text panel, which prints a per-process object id that varies between any two runs.
Answer the Preview's Per-Frame Time Query From a Cached Sum
2026-09-23 08:53:05 +00:00 · 2026-09-23 00:40:22 +08:00 · 2026-09-23 00:40:04 +08:00
968 changed files with 7169 additions and 17940 deletions
@@ -413,14 +413,6 @@ jobs:
        GH_TOKEN: ${{ github.token }}
      run: |
        api="$GITHUB_API_URL/repos/$GITHUB_REPOSITORY/actions/caches"
-        # The save step reports success even when its tar failed, so keep
-        # the older entries unless the new one is listed.
-        if ! curl -sSf -H "Authorization: Bearer $GH_TOKEN" \
-            "$api?ref=$GITHUB_REF&key=$CCACHE_ENTRY" \
-            | jq -e --arg entry "$CCACHE_ENTRY" 'any(.actions_caches[]; .key == $entry)' > /dev/null; then
-          echo "$CCACHE_ENTRY was not saved; keeping the older entries."
-          exit 0
-        fi
        curl -sSf -H "Authorization: Bearer $GH_TOKEN" \
          "$api?ref=$GITHUB_REF&key=ccache-$CCACHE_LEG-&per_page=100" \
          | jq -r --arg prefix "ccache-$CCACHE_LEG-" --argjson run "$GITHUB_RUN_ID" \
@@ -798,13 +798,6 @@ jobs:
        env:
          GH_TOKEN: ${{ github.token }}
        run: |
-          # The save step reports success even when its tar failed, so keep
-          # the older entries unless the new one is listed.
-          if ! gh cache list --ref "$GITHUB_REF" --key "$CCACHE_ENTRY" --json key \
-              | jq -e --arg entry "$CCACHE_ENTRY" 'any(.[]; .key == $entry)' > /dev/null; then
-            echo "$CCACHE_ENTRY was not saved; keeping the older entries."
-            exit 0
-          fi
          gh cache list --ref "$GITHUB_REF" --key "ccache-$CCACHE_LEG-" --limit 100 --json id,key \
            | jq -r --arg prefix "ccache-$CCACHE_LEG-" --argjson run "$GITHUB_RUN_ID" \
                '.[] | select((.key | ltrimstr($prefix) | split("-")[0] | tonumber?) < $run) | .id' \
@@ -5,9 +5,8 @@
 #             re-sliced on its own to see whether it changes the G-code
 #   harness - the GUI-vs-CLI parity harness (metrics only, never fails)
 # Both test the latest successful build_all.yml Linux AppImage from main, with
-# sources checked out at the commit that build was made from; a manual run can
-# name another branch, or pin one build by its run id. Nothing here gates a
-# build or a PR.
+# sources checked out at the commit that build was made from. Nothing here
+# gates a build or a PR.
 name: Parity Nightly

 on:
@@ -21,13 +20,9 @@ on:
        required: false
        default: "main"
      build_branch:
-        description: "branch whose newest successful build_all artifact to test (a PR build is the PR merged into its base; sources are checked out at the PR head)"
+        description: "branch whose latest successful build_all artifact to test"
        required: false
        default: "main"
-      build_run_id:
-        description: "build_all run id to test instead of build_branch's newest (same PR caveat)"
-        required: false
-        default: ""
      fixtures:
        description: "harness fixture ids, space-separated (empty = all)"
        required: false
@@ -55,53 +50,14 @@ jobs:
        env:
          GH_TOKEN: ${{ github.token }}
          GH_REPO: ${{ github.repository }}
-          BRANCH: ${{ inputs.build_branch || 'main' }}
-          RUN_ID: ${{ inputs.build_run_id }}
-          SCHEDULED: ${{ github.event_name == 'schedule' }}
        run: |
          set -euo pipefail
-          if [ -n "$RUN_ID" ]; then
-            [[ $RUN_ID =~ ^[0-9]+$ ]] || { echo "build_run_id must be a numeric run id, got '$RUN_ID'" >&2; exit 1; }
-            # a pinned build is read directly, not through a search; it must come
-            # from this repository, because the later jobs check out its commit here
-            found=$(gh api "repos/$GH_REPO/actions/runs/$RUN_ID" --jq \
-              'select(.path == ".github/workflows/build_all.yml" and .conclusion == "success"
-                      and .head_repository.full_name == env.GH_REPO)
-               | "\(.id) \(.head_sha) \(.created_at)"')
-            [ -n "$found" ] || { echo "run $RUN_ID is not a successful build_all run of $GH_REPO" >&2; exit 1; }
-          else
-            # GitHub serves filtered run listings (branch=, status=, head_sha=, ...)
-            # from a search index that has returned weeks-old results, while the
-            # unfiltered listing stays current, so list unfiltered and filter here.
-            # The repository check keeps out fork PRs whose branch has the same
-            # name. A feature branch is normally built only for its PR, and a PR
-            # build compiles the PR merged into its base rather than head_sha, so
-            # a build of the branch itself (push or dispatch) is preferred when
-            # the same page has one.
-            pick='([.workflow_runs[] | select(.head_branch == env.BRANCH and .conclusion == "success"
-                    and .head_repository.full_name == env.GH_REPO)]
-                   | map(select(.event != "pull_request"))[0] // .[0])
-                  | select(.) | "\(.id) \(.head_sha) \(.created_at)"'
-            # a page of 100 runs spans about a day and a half; a manual run may
-            # target a branch that last built weeks ago
-            pages=3
-            if [ "$SCHEDULED" != true ]; then pages=20; fi
-            found=""
-            for page in $(seq "$pages"); do
-              found=$(gh api "repos/$GH_REPO/actions/workflows/build_all.yml/runs?per_page=100&page=$page" --jq "$pick")
-              if [ -n "$found" ]; then break; fi
-            done
-            [ -n "$found" ] || { echo "no successful $BRANCH build among the last $((pages * 100)) build_all runs; pass build_run_id to test an older one" >&2; exit 1; }
-          fi
-          read -r run_id head_sha created <<< "$found"
-          # the nightly fails rather than report on a stale build
-          if [ "$SCHEDULED" = true ] && [ $(( $(date +%s) - $(date -d "$created" +%s) )) -gt 172800 ]; then
-            echo "newest $BRANCH build $run_id is from $created, over 48 hours old" >&2
-            exit 1
-          fi
-          printf 'run_id=%s\nhead_sha=%s\n' "$run_id" "$head_sha" >> "$GITHUB_OUTPUT"
+          gh run list --workflow build_all.yml \
+            --branch "${{ inputs.build_branch || 'main' }}" \
+            --status success --limit 1 --json databaseId,headSha \
+            --jq '"run_id=\(.[0].databaseId)\nhead_sha=\(.[0].headSha)"' \
+            >> "$GITHUB_OUTPUT"
          cat "$GITHUB_OUTPUT"
-          echo "Testing build [$run_id](https://github.com/$GH_REPO/actions/runs/$run_id) of \`$head_sha\`, built $created" >> "$GITHUB_STEP_SUMMARY"

  effect:
    name: Override sweep effect stage (shard ${{ matrix.shard }})
@@ -826,37 +826,6 @@ find_package(OpenSSL REQUIRED)
 find_package(CURL REQUIRED)
 find_package(Freetype REQUIRED)

-if (SLIC3R_GUI)
-    # LibDataChannel's installed export references its bundled dependencies,
-    # but does not install their CMake targets. Recreate those targets from
-    # the same dependency prefix before loading the LibDataChannel config.
-    if (NOT TARGET Usrsctp::usrsctp)
-        find_library(_ORCA_USRSCTP_LIBRARY NAMES usrsctp
-            PATHS "${CMAKE_PREFIX_PATH}/lib" NO_DEFAULT_PATH)
-        if (_ORCA_USRSCTP_LIBRARY)
-            add_library(Usrsctp::usrsctp UNKNOWN IMPORTED GLOBAL)
-            set_target_properties(Usrsctp::usrsctp PROPERTIES
-                IMPORTED_LOCATION "${_ORCA_USRSCTP_LIBRARY}"
-                IMPORTED_LINK_INTERFACE_LANGUAGES C
-                INTERFACE_LINK_LIBRARIES "Threads::Threads")
-        endif()
-    endif()
-
-    if (NOT TARGET LibJuice::LibJuice)
-        find_library(_ORCA_LIBJUICE_LIBRARY NAMES juice
-            PATHS "${CMAKE_PREFIX_PATH}/lib" NO_DEFAULT_PATH)
-        if (_ORCA_LIBJUICE_LIBRARY)
-            add_library(LibJuice::LibJuice UNKNOWN IMPORTED GLOBAL)
-            set_target_properties(LibJuice::LibJuice PROPERTIES
-                IMPORTED_LOCATION "${_ORCA_LIBJUICE_LIBRARY}"
-                IMPORTED_LINK_INTERFACE_LANGUAGES C
-                INTERFACE_LINK_LIBRARIES "Threads::Threads")
-        endif()
-    endif()
-
-    find_package(LibDataChannel CONFIG REQUIRED)
-endif()
-

 add_library(libcurl INTERFACE)
 target_link_libraries(libcurl INTERFACE CURL::libcurl)
@@ -1137,7 +1106,6 @@ function(orcaslicer_copy_dlls target config postfix output_dlls)
    endif ()
    file(COPY ${_occt_dlls}
            ${CMAKE_PREFIX_PATH}/bin/freetype.dll
-            ${CMAKE_PREFIX_PATH}/bin/avformat-61.dll
            ${CMAKE_PREFIX_PATH}/bin/avcodec-61.dll
            ${CMAKE_PREFIX_PATH}/bin/swresample-5.dll
            ${CMAKE_PREFIX_PATH}/bin/swscale-8.dll
@@ -1150,7 +1118,6 @@ function(orcaslicer_copy_dlls target config postfix output_dlls)
        ${_out_dir}/WebView2Loader.dll

        ${_out_dir}/freetype.dll
-        ${_out_dir}/avformat-61.dll
        ${_out_dir}/avcodec-61.dll
        ${_out_dir}/swresample-5.dll
        ${_out_dir}/swscale-8.dll
@@ -1174,10 +1141,7 @@ function(orcaslicer_copy_sos target config postfix output_sos)
        set(_out_dir "${CMAKE_CURRENT_BINARY_DIR}")
    endif ()

-    file(COPY ${CMAKE_PREFIX_PATH}/lib/libavformat.so
-            ${CMAKE_PREFIX_PATH}/lib/libavformat.so.61
-            ${CMAKE_PREFIX_PATH}/lib/libavformat.so.61.1.100
-            ${CMAKE_PREFIX_PATH}/lib/libavcodec.so
+    file(COPY ${CMAKE_PREFIX_PATH}/lib/libavcodec.so
            ${CMAKE_PREFIX_PATH}/lib/libavcodec.so.61
            ${CMAKE_PREFIX_PATH}/lib/libavcodec.so.61.3.100
            ${CMAKE_PREFIX_PATH}/lib/libavutil.so
@@ -1192,9 +1156,6 @@ function(orcaslicer_copy_sos target config postfix output_sos)
         DESTINATION ${_out_dir})

    set(${output_sos}
-        ${_out_dir}/libavformat.so
-        ${_out_dir}/libavformat.so.61
-        ${_out_dir}/libavformat.so.61.1.100
        ${_out_dir}/libavcodec.so
        ${_out_dir}/libavcodec.so.61
        ${_out_dir}/libavcodec.so.61.3.100
@@ -1324,8 +1285,6 @@ endif ()

 if (CMAKE_SYSTEM_NAME STREQUAL "Linux")
    set(LIBRARY_FILES
-    ${LIBDIR_BIN}/libavformat.so.61
-    ${LIBDIR_BIN}/libavformat.so.61.1.100
    ${LIBDIR_BIN}/libavcodec.so.61
    ${LIBDIR_BIN}/libavcodec.so.61.3.100
    ${LIBDIR_BIN}/libavutil.so.59
@@ -156,7 +156,7 @@ if (NOT _is_multi AND NOT CMAKE_BUILD_TYPE)
 endif ()

 function(orcaslicer_add_cmake_project projectname)
-    cmake_parse_arguments(P_ARGS "FORWARD_CONFIG" "INSTALL_DIR;BUILD_COMMAND;INSTALL_COMMAND;SOURCE_DIR" "CMAKE_ARGS" ${ARGN})
+    cmake_parse_arguments(P_ARGS "FORWARD_CONFIG" "INSTALL_DIR;BUILD_COMMAND;INSTALL_COMMAND" "CMAKE_ARGS" ${ARGN})

    # MSVC is true for clang-cl as well, so the sub-build toolchain has to key on the
    # generator. A non-Visual-Studio superbuild passes its own generator down, and with
@@ -202,18 +202,12 @@ function(orcaslicer_add_cmake_project projectname)
      set(_build_j "-j${NPROC}")
    endif ()

-    set(_source_dir_arg "")
-    if (P_ARGS_SOURCE_DIR)
-        set(_source_dir_arg SOURCE_DIR ${P_ARGS_SOURCE_DIR})
-    endif ()
-
 if (NOT IS_CROSS_COMPILE OR NOT APPLE)
    ExternalProject_Add(
        dep_${projectname}
        EXCLUDE_FROM_ALL    ON
        INSTALL_DIR         ${DESTDIR}
        DOWNLOAD_DIR        ${DEP_DOWNLOAD_DIR}/${projectname}
-        ${_source_dir_arg}
        ${_gen}
        CMAKE_ARGS
            -DCMAKE_POLICY_VERSION_MINIMUM=3.5
@@ -246,14 +240,12 @@ if (NOT IS_CROSS_COMPILE OR NOT APPLE)
        # note for future devs: shared libs may actually create a size reduction
        # but orcaslicer_deps tends to get really funny regarding linking after that (notably boost)
        # so, as much as I would like to use that, it's not happening
-        if (NOT P_ARGS_SOURCE_DIR)
-            ExternalProject_Add_Step(dep_${projectname} free_download_space
-                    DEPENDEES download # do after download
-                    COMMENT "Freeing Space: Removing source archive"
-                    WORKING_DIRECTORY ${DEP_DOWNLOAD_DIR}
-                    COMMAND ${CMAKE_COMMAND} -E rm -rf ${projectname}
-            )
-        endif ()
+        ExternalProject_Add_Step(dep_${projectname} free_download_space
+                DEPENDEES download # do after download
+                COMMENT "Freeing Space: Removing source archive"
+                WORKING_DIRECTORY ${DEP_DOWNLOAD_DIR}
+                COMMAND ${CMAKE_COMMAND} -E rm -r ${projectname}
+        )
        ExternalProject_Add_Step(dep_${projectname} free_build_space
                DEPENDEES install # do after install
                COMMENT "Freeing Space: Removing source and build files"
@@ -267,7 +259,6 @@ else()
        EXCLUDE_FROM_ALL    ON
        INSTALL_DIR         ${DESTDIR}
        DOWNLOAD_DIR        ${DEP_DOWNLOAD_DIR}/${projectname}
-        ${_source_dir_arg}
        ${_gen}
        CMAKE_ARGS
            -DCMAKE_POLICY_VERSION_MINIMUM=3.5
@@ -395,6 +386,10 @@ include(libnoise/libnoise.cmake)

 include(Draco/Draco.cmake)

+include(FFMPEG/FFMPEG.cmake)
+include(Assimp/Assimp.cmake)
+
+
 # I *think* 1.1 is used for *just* md5 hashing?
 # 3.1 has everything in the right place, but the md5 funcs used are deprecated
 # a grep across the repo shows it is used for other things
@@ -405,12 +400,6 @@ if(NOT OPENSSL_FOUND)
    set(OPENSSL_PKG dep_OpenSSL)
 endif()

-include(FFMPEG/FFMPEG.cmake)
-include(Assimp/Assimp.cmake)
-
-include(DataChannel/DataChannel.cmake)
-set(DATACHANNEL_PKG dep_DataChannel)
-
 # we don't want to load a "wrong" openssl when loading curl
 # so, just don't even bother
 # ...i think this is how it works? change if wrong
@@ -484,7 +473,6 @@ set(_dep_list
    dep_wxInspector
    dep_FFMPEG
    dep_Assimp
-    ${DATACHANNEL_PKG}
    )

 if (MSVC)
@@ -1,37 +0,0 @@
-# libdatachannel is the native ICE/DTLS/SCTP implementation used by the
-# GUI WebRTC camera controller. Keep the source revision fixed: the signaling
-# protocol is evolving independently of this transport dependency.
-#
-# It vendors plog, usrsctp and libjuice as git submodules, which a plain
-# GitHub tag tarball does not include. The flatpak sandbox has no network
-# access during the build, so there the manifest itself clones the repo
-# (submodules and all) into the dependency download directory before the
-# sandbox closes. ExternalProject_Add is pointed at that existing checkout
-# instead of being given its own network-dependent download method.
-if (FLATPAK)
-    set(_datachannel_source
-        SOURCE_DIR ${DEP_DOWNLOAD_DIR}/DataChannel
-    )
-else()
-    set(_datachannel_source
-        GIT_REPOSITORY https://github.com/paullouisageneau/libdatachannel.git
-        GIT_TAG v0.24.5
-        GIT_SHALLOW ON
-        GIT_SUBMODULES_RECURSE ON
-    )
-endif()
-
-orcaslicer_add_cmake_project(DataChannel
-    DEPENDS ${OPENSSL_PKG}
-    CMAKE_ARGS
-        -DNO_EXAMPLES=ON
-        -DNO_TESTS=ON
-        -DNO_WEBSOCKET=ON
-        -DNO_MEDIA=ON
-        -DUSE_NICE=OFF
-        -DUSE_SYSTEM_JUICE=OFF
-        -DUSE_SYSTEM_USRSCTP=OFF
-        -DOPENSSL_ROOT_DIR:PATH=${DESTDIR}
-        -DOPENSSL_USE_STATIC_LIBS=ON
-    ${_datachannel_source}
-)
@@ -1,26 +1,14 @@
 set(_conf_cmd ./configure)

-set(_ffmpeg_depends)
-set(_ffmpeg_configure_command ${_conf_cmd})
-if (TARGET dep_OpenSSL)
-    set(_ffmpeg_depends DEPENDS dep_OpenSSL)
-    set(_ffmpeg_configure_command
-        ${CMAKE_COMMAND} -E env
-        "PKG_CONFIG_PATH=${DESTDIR}/lib/pkgconfig:$ENV{PKG_CONFIG_PATH}"
-        ${_conf_cmd}
-    )
-endif()
-
 if (MSVC)
    set(_source_dir "${CMAKE_BINARY_DIR}/dep_FFMPEG-prefix/src/dep_FFMPEG")

-    set(PREBUILD_URL_arm64 "https://github.com/Noisyfox/FFmpeg-Builds-Orca/releases/download/autobuild-2026-09-18-16-50/ffmpeg-n7.0.3-33-g887d4b4919-winarm64-orca-shared-7.0.zip")
-    set(PREBUILD_HASH_arm64 "da480cbb39680056de824c57ec4dc3bd577b479ebbc310ff1f9dc55cf014b4c1")
-    set(PREBUILD_URL_x64 "https://github.com/Noisyfox/FFmpeg-Builds-Orca/releases/download/autobuild-2026-09-18-16-50/ffmpeg-n7.0.3-33-g887d4b4919-win64-orca-shared-7.0.zip")
-    set(PREBUILD_HASH_x64 "85da19daf198f5548259d8aabb349db84997a3f6e6886d8d7764114add9c6dae")
+    set(PREBUILD_URL_arm64 "https://github.com/Noisyfox/FFmpeg-Builds-Orca/releases/download/autobuild-2026-07-17-14-28/ffmpeg-n7.0.3-31-g9b6ffd74b5-winarm64-orca-shared-7.0.zip")
+    set(PREBUILD_HASH_arm64 "12f4140279f2f8469885e1b5b2e8be9d788882914c21523cacd56989f3548054")
+    set(PREBUILD_URL_x64 "https://github.com/Noisyfox/FFmpeg-Builds-Orca/releases/download/autobuild-2026-07-17-14-28/ffmpeg-n7.0.3-31-g9b6ffd74b5-win64-orca-shared-7.0.zip")
+    set(PREBUILD_HASH_x64 "e65916020ddb9ef84b2666dfbcbfc9b1d67f69d15b4a66db53754637bf2d498c")

    ExternalProject_Add(dep_FFMPEG
-        ${_ffmpeg_depends}
        URL ${PREBUILD_URL_${DEPS_ARCH}}
        URL_HASH SHA256=${PREBUILD_HASH_${DEPS_ARCH}}
        DOWNLOAD_DIR ${DEP_DOWNLOAD_DIR}/FFMPEG
@@ -33,8 +21,6 @@ if (MSVC)
    )

 else ()
-    set(_openssl_cmd --enable-openssl)
-
    if (APPLE)
        set(_minos_cmd
            "--extra-cflags=-mmacosx-version-min=${DEP_OSX_TARGET}"
@@ -66,11 +52,10 @@ else ()
    endif()

    ExternalProject_Add(dep_FFMPEG
-        ${_ffmpeg_depends}
        URL https://github.com/FFmpeg/FFmpeg/archive/refs/tags/n7.0.3.tar.gz
        URL_HASH SHA256=DEEDCABE339165214A3637DF4C86A507AEF0D793CF8774FF68735F4737E8DDBC
        DOWNLOAD_DIR ${DEP_DOWNLOAD_DIR}/FFMPEG
-        CONFIGURE_COMMAND ${_ffmpeg_configure_command}
+        CONFIGURE_COMMAND ${_conf_cmd}
            ${_cross_cmd}
            ${_pic_cmd}
            ${_arch_cmd}
@@ -78,21 +63,20 @@ else ()
            "--prefix=${DESTDIR}"
            ${_link_cmd}
            ${_minos_cmd}
-            ${_openssl_cmd}
            --disable-doc
            --enable-small
            --disable-outdevs
            --disable-filters
            --enable-filter=*null*,afade,*fifo,*format,*resample,aeval,allrgb,allyuv,atempo,pan,*bars,color,*key,crop,draw*,eq*,framerate,*_qsv,*_vaapi,*v4l2*,hw*,scale,volume,test*
            --disable-protocols
-            --enable-protocol=file,fd,pipe,http,https,rtp,tcp,udp
+            --enable-protocol=file,fd,pipe,rtp,udp
            --disable-muxers
            --enable-muxer=rtp
            --disable-encoders
            --disable-decoders
            --enable-decoder=*aac*,h264*,mp3*,mjpeg,rv*
            --disable-demuxers
-            --enable-demuxer=h264,mp3,mov,mpjpeg,rtsp,sdp
+            --enable-demuxer=h264,mp3,mov
            --disable-zlib
            --disable-avdevice
        BUILD_IN_SOURCE ON
@@ -1,240 +0,0 @@
-# Printer agents
-
-Printer agents isolate printer-specific communication from the rest of OrcaSlicer. The GUI and
-`DeviceManager` operate on a shared set of printer operations and device state; a selected printer
-agent implements those operations for a particular printer ecosystem. The agent boundary allows
-Bambu, Moonraker-based printers, built-in integrations, and Python-provided integrations to use the
-same application workflow without making the GUI understand every printer protocol.
-
-The current boundary is an adapter boundary around the existing application contract. In particular,
-some request fields and message payloads still use the Bambu-shaped representation that existing
-`MachineObject` and `DeviceManager` code consumes. The printer agent is responsible for translating
-that representation into the protocol spoken by its printer. This is an intentional compatibility
-constraint of the current design; the interface is not yet a neutral printer protocol.
-
-The v1 dialect migration path is deliberately narrow. `DeviceManager` currently speaks the Bambu JSON
-dialect because that is the payload shape already used throughout the command and state workflow. The
-v1 `OrcaPrinterAgent` also accepts that Bambu dialect. Its transport path places the small translation
-needed for the target printer at `deliver_to_sink`, keeping the compatibility code at the edge rather
-than spreading it through `DeviceManager` or the agent interface.
-
-The eventual direction is for `DeviceManager` to produce an Orca JSON dialect. The Bambu agent will then
-own the translation from Orca JSON to Bambu's protocol, while `OrcaPrinterAgent` can forward the Orca
-payload directly to its sink. The v1 translation at `deliver_to_sink` can then be removed without
-changing `DeviceManager`, the command callers, or the rest of the agent workflow.
-
-## Components
-
-The system has four relevant layers:
-
-```text
-GUI / DeviceManager / MachineObject
-              |
-        NetworkAgent
-          /       \
- IPrinterAgent   ICloudServiceAgent
-      |                 |
- printer protocol   authentication and cloud services
-```
-
-### `DeviceManager` and `MachineObject`
-
-`DeviceManager` owns the application-facing printer workflow. It maintains `MachineObject` instances,
-updates their state, filters devices for the active printer agent, and initiates operations such as
-homing, temperature changes, printing, subscriptions, and camera playback.
-
-`MachineObject` remains the shared state model used by the GUI. It does not contain the implementation
-of a printer protocol. When a device is discovered or returned by a cloud query, the device is tagged
-with the active `printer_agent_id`. Device lists and selected-machine operations use that tag to avoid
-sending an operation through an agent that does not own the device.
-
-### `NetworkAgent`
-
-`NetworkAgent` is the façade used by the GUI and `DeviceManager`. It owns:
-
- the currently selected `IPrinterAgent`;
- the registered cloud-service instances, indexed by provider;
- callbacks shared by the active printer agent and the application;
- the forwarding methods for printer commands and cloud operations.
-
-There is one active printer agent for the currently selected printer preset. Switching the preset
-increments the machine-list generation, disconnects the old printer agent, removes its callbacks, and
-installs the newly selected agent. The façade then forwards printer operations to that agent.
-
-Cloud operations are selected separately using a provider key. `NetworkAgent` forwards a cloud request
-to the matching `ICloudServiceAgent`, and forwards cloud camera operations with a device ID. The
-printer agent receives a cloud-agent pointer through `set_cloud_agent()` when it is created, allowing
-printer communication to obtain cloud tokens without depending on a concrete cloud implementation.
-
-### `IPrinterAgent`
-
-`IPrinterAgent` is the printer-facing contract. It covers:
-
- cloud-relay and direct-LAN message delivery;
- LAN connection, discovery, binding, and certificates;
- printer subscriptions and callbacks;
- print operations;
- filament synchronization;
- camera capability and local camera URL reporting;
- printer command methods.
-
-Concrete built-in implementations include the Bambu wrapper, the native Orca/Moonraker path, and
-other printer-agent implementations registered by the application. A printer agent may use either
-the cloud agent, a direct LAN connection, or both.
-
-### `ICloudServiceAgent`
-
-`ICloudServiceAgent` owns authentication and services provided by a cloud backend. It covers login
-state, tokens, user and printer lists, settings synchronization, model services, cloud messages, and
-cloud camera operations.
-
-Cloud camera operations are device-scoped:
-
- `get_camera_url(dev_id, callback)` obtains a stream URL for one device;
- `create_camera_signaling_channel(dev_id)` creates signaling for one device where the provider
-  supports it.
-
-This is separate from the local camera URL exposed by `IPrinterAgent`, which is currently scoped to
-the active printer agent because a normal LAN agent represents one physical printer connection.
-
-## Agent registration and selection
-
-`NetworkAgentFactory` maintains the printer-agent registry. Each registry entry contains an agent ID,
-a display name, and a factory function. Built-in agents register during application initialization.
-Python printer-agent capabilities register dynamically and contribute an agent ID and factory entry.
-
-The selected printer preset contains the printer-agent choice. If no explicit choice is stored, the
-application preserves the existing default behavior: Bambu presets select the Bambu agent and other
-presets select the native Orca agent. When a preset is changed, `GUI_App` resolves the effective agent
-ID, obtains the corresponding cloud agent, creates the printer agent through the registry, and installs
-it in `NetworkAgent`.
-
-The registry rejects conflicting agent IDs. This matters for Python plugins because an agent ID is the
-stable identity used by presets and device ownership; two enabled plugin capabilities must not claim
-the same ID.
-
-## Message and command flow
-
-There are two low-level message paths:
-
- `send_message()` publishes a command through the printer's cloud relay;
- `send_message_to_printer()` sends a command directly to the printer over the LAN path.
-
-Both paths accept a JSON string, quality-of-service and flag values, and return the existing network
-status code domain. The agent owns the conversion from that JSON contract to its native transport.
-
-The typed `command_*` methods are the application-facing convenience layer. The five generic defaults
-currently implemented by `IPrinterAgent` construct the existing JSON dialect and route through the
-same message path:
-
-| Method | Default operation |
-| --- | --- |
-| `command_xyz_abs()` | Send `G90` for absolute positioning |
-| `command_auto_leveling()` | Send `G29` for bed leveling |
-| `command_go_home()` | Use the supported homing operation or send `G28` |
-| `command_set_bed()` | Use the supported bed control or send `M140` |
-| `command_set_nozzle()` | Send `M104` for nozzle temperature |
-
-These are compatibility defaults for common printer workflows, not a guarantee that every firmware
-implements every command identically. An agent can override a method when its protocol needs another
-operation. For example, a Klipper configuration may use `BED_MESH_CALIBRATE` instead of `G29`.
-
-The remaining common command methods default to `ORCA_NETWORK_ERR_CMD_NOT_SUPPORTED` because their
-existing behavior is vendor-specific or has no portable implementation:
-
- AMS RFID refresh;
- AMS calibration;
- AMS tray selection;
- camera start;
- axis control.
-
-The methods remain on the common interface so an agent that supports them can override them explicitly.
-`sequence_id` remains part of the command contract because `DeviceManager` creates and tracks it as
-the command ID.
-
-## Device ownership and stale responses
-
-Printer-agent ownership is represented by `printer_agent_id` on device records and `MachineObject`
-instances. The active agent ID is attached when a device is discovered, returned by a cloud list, or
-reused after a preset switch. Local-machine configuration also persists the agent ID so a saved LAN
-device is not silently reused by an unrelated agent.
-
-Cloud printer-list responses carry three pieces of request context added by `NetworkAgent`:
-
-```text
-provider   cloud provider used for the request
-agent_id   active printer agent when the request was made
-generation machine-list generation when the request was made
-```
-
-`DeviceManager` accepts the response only when those values still match the current provider, active
-agent, and generation. This prevents a slow response from the previous preset or provider from
-repopulating the current device list.
-
-The provider mapping is currently selected by `GUI_App`: the Bambu agent maps to the Bambu cloud
-provider and other agents map to the Orca cloud provider. The generation check protects that existing
-selection from races; it does not make cloud-provider ownership intrinsic to an agent. Cloud-printer
-ownership and the broader Orca cloud services are therefore still separate architectural concerns.
-
-## Python printer agents
-
-`PrinterAgentPluginCapability` implements `IPrinterAgent` directly. The live capability object is
-registered with `NetworkAgentFactory` and handed out as the printer agent when its agent ID is selected.
-The plugin receives the selected `ICloudServiceAgent` through `set_cloud_agent()` just like a built-in
-printer agent.
-
-Python plugins must implement the core communication and lifecycle methods required by the interface,
-including agent metadata, printer connection, discovery callbacks, and the two message-send methods.
-Methods that are meaningful only to a particular printer are optional overrides where the C++ base
-class provides a default.
-
-All ten `command_*` methods are available in the Python binding and in the trampoline. Their override
-status is intentionally optional:
-
- the five generic commands use the C++ default when Python does not override them;
- the five vendor-specific commands return `NOT_SUPPORTED` unless Python supplies an implementation;
- a Python implementation can replace either behavior for its own protocol.
-
-The Python camera binding exposes HTTP, HTTPS, RTSP, and HTTP-snapshot modes. WebRTC remains a
-built-in C++ camera mode, but is not exposed as a Python mode because the current Python capability
-does not provide the corresponding cloud signaling-channel contract.
-
-## Camera playback boundary
-
-The camera stream mode describes how a stream is obtained; it does not by itself define ownership of
-the wxWidgets view that renders it. `MediaPlayCtrl` selects and tears down the active backend, while
-the wx parent owns the child window or renderer. This is important because a web view, native media
-control, and frame-based/WebRTC renderer have different wx window-lifetime requirements.
-
-Cloud URL and signaling requests are routed through `NetworkAgent` to the cloud provider selected for
-the device. Local URL requests are routed to the active printer agent. The distinction keeps cloud
-account services device-scoped while preserving the current one-LAN-agent/one-printer model.
-
-## Compatibility constraints
-
-The printer-agent boundary intentionally preserves several existing application contracts:
-
- Bambu-shaped JSON is still the shared command representation;
- existing network status codes are reused, with Orca-specific unsupported/capability errors added
-  in the Orca-reserved range;
- `MachineObject` remains the shared device-state model;
- preset and local-machine data retain compatibility with the existing agent-selection behavior;
- Python plugins use the existing capability and pybind11 registration system.
-
-The agent abstraction is therefore responsible for containing vendor differences, not for pretending
-that all vendor protocols are identical. The planned Orca JSON dialect is the protocol-neutral command
-model for the `DeviceManager`/agent boundary. Once it is introduced, Bambu-specific translation remains
-inside the Bambu agent and the Orca agent's v1 sink adapter can be removed as a self-contained cleanup.
-
-## Main implementation locations
-
- [`IPrinterAgent`](../../src/slic3r/Utils/IPrinterAgent.hpp) — printer-agent contract and generic command defaults
- [`ICloudServiceAgent`](../../src/slic3r/Utils/ICloudServiceAgent.hpp) — cloud service and per-device
-  cloud camera contract
- [`NetworkAgent`](../../src/slic3r/Utils/NetworkAgent.hpp) — façade and dispatch between active agents
- [`NetworkAgentFactory`](../../src/slic3r/Utils/NetworkAgentFactory.hpp) — built-in and Python agent registry
- [`DeviceManager`](../../src/slic3r/GUI/DeviceCore/DevManager.cpp) — device ownership, filtering, and
-  stale-response checks
- [`PrinterAgentPluginCapability`](../../src/slic3r/plugin/pluginTypes/printerAgent/PrinterAgentPluginCapability.cpp)
-  — Python bindings
- [`MediaPlayCtrl`](../../src/slic3r/GUI/MediaPlayCtrl.cpp) — camera backend selection and playback lifecycle
@@ -3,7 +3,7 @@
 	"name": "AliZ PA-CF @P1-X1",
 	"inherits": "AliZ PA-CF @base",
 	"from": "system",
-	"setting_id": "cN0uesF0mZf3KSkj",
+	"setting_id": "AliZ003_00",
 	"instantiation": "true",
 	"enable_pressure_advance": [
 		"1"
@@ -3,7 +3,7 @@
 	"name": "AliZ PETG @P1-X1",
 	"inherits": "AliZ PETG @base",
 	"from": "system",
-	"setting_id": "cZp23cC4ong9q6dn",
+	"setting_id": "AliZ001_00",
 	"instantiation": "true",
 	"enable_pressure_advance": [
 		"1"
@@ -3,7 +3,7 @@
 	"name": "AliZ PETG-CF @P1-X1",
 	"inherits": "AliZ PETG-CF @base",
 	"from": "system",
-	"setting_id": "HWW5mejsB0SfEfWw",
+	"setting_id": "AZ01-1_00",
 	"instantiation": "true",
 	"enable_pressure_advance": [
 		"1"
@@ -3,7 +3,7 @@
 	"name": "AliZ PETG-Metal @P1-X1",
 	"inherits": "AliZ PETG-Metal @base",
 	"from": "system",
-	"setting_id": "JqD0blE4fxaNfXqB",
+	"setting_id": "AZ01-2_00",
 	"instantiation": "true",
 	"enable_pressure_advance": [
 		"1"
@@ -3,7 +3,7 @@
 	"name": "AliZ PLA @P1-X1",
 	"inherits": "AliZ PLA @base",
 	"from": "system",
-	"setting_id": "fRELapY8YiP4qrBW",
+	"setting_id": "AliZ002_00",
 	"instantiation": "true",
 	"enable_pressure_advance": [
 		"1"
@@ -3,7 +3,7 @@
 	"name": "BETA ABS @BBL A1",
 	"inherits": "BETA ABS @base",
 	"from": "system",
-	"setting_id": "dUGRrmxU89pRaJ2Z",
+	"setting_id": "BABB00_07",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"20"
@@ -3,7 +3,7 @@
 	"name": "BETA ABS @BBL H2D",
 	"inherits": "BETA ABS @base",
 	"from": "system",
-	"setting_id": "oxZKTEMd8TpyoH39",
+	"setting_id": "BABB00_11",
 	"instantiation": "true",
 	"chamber_temperatures": [
 		"65"
@@ -3,7 +3,7 @@
 	"name": "BETA ABS @BBL P1P",
 	"inherits": "BETA ABS @base",
 	"from": "system",
-	"setting_id": "MPYyfCKMsJZy8GaY",
+	"setting_id": "BABB00_03",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"20"
@@ -3,7 +3,7 @@
 	"name": "BETA ABS @BBL X1C",
 	"inherits": "BETA ABS @base",
 	"from": "system",
-	"setting_id": "vMA7EhgNDT4MwMRr",
+	"setting_id": "BABB00",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"60"
@@ -0,0 +1,21 @@
+{
+	"type": "filament",
+	"name": "BETA ABS @base",
+	"inherits": "fdm_filament_abs",
+	"from": "system",
+	"filament_id": "OFjUXn67",
+	"instantiation": "false",
+	"description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
+	"filament_cost": [
+		"24.99"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_vendor": [
+		"BETA"
+	],
+	"impact_strength_z": [
+		"7.4"
+	]
+}
@@ -3,7 +3,7 @@
 	"name": "BETA ASA @BBL A1 0.4 nozzle",
 	"inherits": "BETA ASA @base",
 	"from": "system",
-	"setting_id": "LevRG7t9mTlEseaB",
+	"setting_id": "BASB00_09",
 	"instantiation": "true",
 	"chamber_temperatures": [
 		"60"
@@ -3,7 +3,7 @@
 	"name": "BETA ASA @BBL H2D 0.4 nozzle",
 	"inherits": "BETA ASA @base",
 	"from": "system",
-	"setting_id": "3NBkWTXmqi8eRUhi",
+	"setting_id": "BASB00_13",
 	"instantiation": "true",
 	"chamber_temperatures": [
 		"65"
@@ -3,7 +3,7 @@
 	"name": "BETA ASA @BBL X1C 0.4 nozzle",
 	"inherits": "BETA ASA @base",
 	"from": "system",
-	"setting_id": "0nWTEZkH7NKXgCib",
+	"setting_id": "BASB00_02",
 	"instantiation": "true",
 	"chamber_temperatures": [
 		"60"
@@ -53,53 +53,5 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"100"
-	],
-	"activate_air_filtration": [
-		"1"
-	],
-	"close_additional_fan_first_x_layers": [
-		"3"
-	],
-	"retraction_distances_when_ec": [
-		"0"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"temperature_vitrification": [
-		"100"
-	],
-	"filament_start_gcode": [
-		"; Filament gcode\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n\n"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0"
-	],
-	"filament_adhesiveness_category": [
-		"200"
-	],
-	"filament_dev_ams_drying_time": [
-		"12",
-		"8.0",
-		"12",
-		"8.0"
-	],
-	"filament_dev_ams_drying_heat_distortion_temperature": [
-		"100"
-	],
-	"filament_dev_drying_cooling_temperature": [
-		"85"
-	],
-	"filament_dev_ams_drying_temperature": [
-		"65",
-		"80",
-		"65",
-		"80"
-	],
-	"filament_dev_drying_softening_temperature": [
-		"85"
 	]
 }
@@ -3,7 +3,7 @@
 	"name": "BETA HIPS @BBL H2D",
 	"inherits": "BETA HIPS @base",
 	"from": "system",
-	"setting_id": "9nN2uWxlYH1c507A",
+	"setting_id": "BHIB00_06",
 	"instantiation": "true",
 	"filament_deretraction_speed": [
 		"nil",
@@ -3,7 +3,7 @@
 	"name": "BETA HIPS @BBL X1C",
 	"inherits": "BETA HIPS @base",
 	"from": "system",
-	"setting_id": "mTcT8sCciWyX5enc",
+	"setting_id": "BHIB00_00",
 	"instantiation": "true",
 	"filament_max_volumetric_speed": [
 		"8",
@@ -0,0 +1,14 @@
+{
+	"type": "filament",
+	"name": "BETA HIPS @base",
+	"inherits": "fdm_filament_hips",
+	"from": "system",
+	"filament_id": "OFlmxlDG",
+	"instantiation": "false",
+	"filament_is_support": [
+		"1"
+	],
+	"filament_vendor": [
+		"BETA"
+	]
+}
@@ -3,7 +3,7 @@
 	"name": "BETA PAHT-CF @BBL H2D",
 	"inherits": "BETA PAHT-CF @base",
 	"from": "system",
-	"setting_id": "YbYCVQd5IR0sQR8S",
+	"setting_id": "BPAB00_01",
 	"instantiation": "true",
 	"chamber_temperatures": [
 		"60"
@@ -3,7 +3,7 @@
 	"name": "BETA PAHT-CF @BBL P1P",
 	"inherits": "BETA PAHT-CF @base",
 	"from": "system",
-	"setting_id": "5O5fzmFrT3O1k1H0",
+	"setting_id": "BPAB00_10",
 	"instantiation": "true",
 	"filament_flow_ratio": [
 		"0.96",
@@ -3,7 +3,7 @@
 	"name": "BETA PAHT-CF @BBL X1C",
 	"inherits": "BETA PAHT-CF @base",
 	"from": "system",
-	"setting_id": "gB5HLYTDCooFy2W5",
+	"setting_id": "BPAB00",
 	"instantiation": "true",
 	"chamber_temperatures": [
 		"60"
@@ -0,0 +1,48 @@
+{
+	"type": "filament",
+	"name": "BETA PAHT-CF @base",
+	"inherits": "fdm_filament_pa",
+	"from": "system",
+	"filament_id": "OF6qw3Wb",
+	"instantiation": "false",
+	"description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
+	"fan_cooling_layer_time": [
+		"5"
+	],
+	"fan_max_speed": [
+		"30"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"filament_cost": [
+		"94.99"
+	],
+	"filament_density": [
+		"1.06"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_type": [
+		"PA-CF"
+	],
+	"filament_vendor": [
+		"BETA"
+	],
+	"full_fan_speed_layer": [
+		"2"
+	],
+	"impact_strength_z": [
+		"13.3"
+	],
+	"overhang_fan_speed": [
+		"40"
+	],
+	"overhang_fan_threshold": [
+		"0%"
+	],
+	"temperature_vitrification": [
+		"180"
+	]
+}
@@ -3,7 +3,7 @@
 	"name": "BETA PEBA 90A @BBL A1",
 	"inherits": "BETA PEBA 90A @base",
 	"from": "system",
-	"setting_id": "A57Sbar56Ah1NiU7",
+	"setting_id": "BPBB00_04",
 	"instantiation": "true",
 	"filament_density": [
 		"1.22"
@@ -3,7 +3,7 @@
 	"name": "BETA PEBA 90A @BBL A1M",
 	"inherits": "BETA PEBA 90A @base",
 	"from": "system",
-	"setting_id": "OoLkWS147R0AasZc",
+	"setting_id": "BPBB00_05",
 	"instantiation": "true",
 	"filament_density": [
 		"1.22"
@@ -3,7 +3,7 @@
 	"name": "BETA PEBA 90A @BBL H2D",
 	"inherits": "BETA PEBA 90A @base",
 	"from": "system",
-	"setting_id": "91b8WTzvOky9wAVK",
+	"setting_id": "BPBB00_02",
 	"instantiation": "true",
 	"additional_cooling_fan_speed": [
 		"100"
@@ -3,7 +3,7 @@
 	"name": "BETA PEBA 90A @BBL P1P",
 	"inherits": "BETA PEBA 90A @base",
 	"from": "system",
-	"setting_id": "ydudEBLRmj1WSXqB",
+	"setting_id": "BPBB00_01",
 	"instantiation": "true",
 	"filament_max_volumetric_speed": [
 		"2.8",
@@ -3,7 +3,7 @@
 	"name": "BETA PEBA 90A @BBL X1C",
 	"inherits": "BETA PEBA 90A @base",
 	"from": "system",
-	"setting_id": "F1hTal3M92tBjv2N",
+	"setting_id": "BPBB00_00",
 	"instantiation": "true",
 	"filament_max_volumetric_speed": [
 		"2.8",
@@ -0,0 +1,33 @@
+{
+	"type": "filament",
+	"name": "BETA PEBA 90A @base",
+	"inherits": "fdm_filament_tpu",
+	"from": "system",
+	"filament_id": "OFI2MKy7",
+	"instantiation": "false",
+	"description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.",
+	"filament_cost": [
+		"59.99"
+	],
+	"filament_max_volumetric_speed": [
+		"2.8"
+	],
+	"filament_vendor": [
+		"BETA"
+	],
+	"impact_strength_z": [
+		"87.3"
+	],
+	"nozzle_temperature": [
+		"225"
+	],
+	"nozzle_temperature_initial_layer": [
+		"225"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"slow_down_layer_time": [
+		"14"
+	]
+}
@@ -3,7 +3,7 @@
 	"name": "BETA PETG @BBL A1",
 	"inherits": "BETA PETG @base",
 	"from": "system",
-	"setting_id": "EpYzxZwVHvLaseku",
+	"setting_id": "BPGB00_06",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"50"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG @BBL A1M 0.4 nozzle",
 	"inherits": "BETA PETG @base",
 	"from": "system",
-	"setting_id": "5V0hyhzFoDU8Tfwm",
+	"setting_id": "BPGB00_03",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"50"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG @BBL H2D 0.4 nozzle",
 	"inherits": "BETA PETG @base",
 	"from": "system",
-	"setting_id": "KnKvUsD4rSpQU413",
+	"setting_id": "BPGB00_09",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"30"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG @BBL X1C",
 	"inherits": "BETA PETG @base",
 	"from": "system",
-	"setting_id": "uM6wHdt0N5ftZRge",
+	"setting_id": "BPGB00_01",
 	"instantiation": "true",
 	"fan_min_speed": [
 		"20"
@@ -92,48 +92,5 @@
 	],
 	"filament_start_gcode": [
 		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-	],
-	"close_additional_fan_first_x_layers": [
-		"3"
-	],
-	"retraction_distances_when_ec": [
-		"0"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n\n"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0"
-	],
-	"filament_adhesiveness_category": [
-		"300"
-	],
-	"filament_dev_chamber_drying_bed_temperature": [
-		"80"
-	],
-	"filament_dev_ams_drying_time": [
-		"12",
-		"12",
-		"12",
-		"12"
-	],
-	"filament_dev_ams_drying_ams_limitations": [
-		"1",
-		"0"
-	],
-	"filament_dev_ams_drying_heat_distortion_temperature": [
-		"75"
-	],
-	"filament_dev_drying_cooling_temperature": [
-		"55"
-	],
-	"filament_dev_ams_drying_temperature": [
-		"65",
-		"65",
-		"55",
-		"55"
-	],
-	"filament_dev_drying_softening_temperature": [
-		"60"
 	]
 }
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Fluorescence @BBL A1",
 	"inherits": "BETA PETG Fluorescence @base",
 	"from": "system",
-	"setting_id": "ZtyTtAWsZnLGsM0O",
+	"setting_id": "BPGB02_06",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"50"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Fluorescence @BBL A1M 0.4 nozzle",
 	"inherits": "BETA PETG Fluorescence @base",
 	"from": "system",
-	"setting_id": "VUSunTT0OJa7iOSd",
+	"setting_id": "BPGB02_03",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"50"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Fluorescence @BBL H2D 0.4 nozzle",
 	"inherits": "BETA PETG Fluorescence @base",
 	"from": "system",
-	"setting_id": "JHg4y0pxAOtoJSuw",
+	"setting_id": "BPGB02_09",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"30"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Fluorescence @BBL X1C",
 	"inherits": "BETA PETG Fluorescence @base",
 	"from": "system",
-	"setting_id": "pCetfFvyLLw3vS2j",
+	"setting_id": "BPGB02_01",
 	"instantiation": "true",
 	"fan_min_speed": [
 		"20"
@@ -92,48 +92,5 @@
 	],
 	"filament_start_gcode": [
 		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-	],
-	"close_additional_fan_first_x_layers": [
-		"3"
-	],
-	"retraction_distances_when_ec": [
-		"0"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n\n"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0"
-	],
-	"filament_adhesiveness_category": [
-		"300"
-	],
-	"filament_dev_chamber_drying_bed_temperature": [
-		"80"
-	],
-	"filament_dev_ams_drying_time": [
-		"12",
-		"12",
-		"12",
-		"12"
-	],
-	"filament_dev_ams_drying_ams_limitations": [
-		"1",
-		"0"
-	],
-	"filament_dev_ams_drying_heat_distortion_temperature": [
-		"75"
-	],
-	"filament_dev_drying_cooling_temperature": [
-		"55"
-	],
-	"filament_dev_ams_drying_temperature": [
-		"65",
-		"65",
-		"55",
-		"55"
-	],
-	"filament_dev_drying_softening_temperature": [
-		"60"
 	]
 }
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Glitter @BBL A1",
 	"inherits": "BETA PETG Glitter @base",
 	"from": "system",
-	"setting_id": "cz5dC7OrXDlX1Ctj",
+	"setting_id": "BPGB03_06",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"50"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Glitter @BBL A1M 0.4 nozzle",
 	"inherits": "BETA PETG Glitter @base",
 	"from": "system",
-	"setting_id": "PozWnOfZ2l7HqTpx",
+	"setting_id": "BPGB03_03",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"50"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Glitter @BBL H2D 0.4 nozzle",
 	"inherits": "BETA PETG Glitter @base",
 	"from": "system",
-	"setting_id": "ijW4zvNAQ3DIK984",
+	"setting_id": "BPGB03_09",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"30"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Glitter @BBL X1C",
 	"inherits": "BETA PETG Glitter @base",
 	"from": "system",
-	"setting_id": "UI220qldPoLY8VZN",
+	"setting_id": "BPGB03_01",
 	"instantiation": "true",
 	"fan_min_speed": [
 		"20"
@@ -92,48 +92,5 @@
 	],
 	"filament_start_gcode": [
 		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-	],
-	"close_additional_fan_first_x_layers": [
-		"3"
-	],
-	"retraction_distances_when_ec": [
-		"0"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n\n"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0"
-	],
-	"filament_adhesiveness_category": [
-		"300"
-	],
-	"filament_dev_chamber_drying_bed_temperature": [
-		"80"
-	],
-	"filament_dev_ams_drying_time": [
-		"12",
-		"12",
-		"12",
-		"12"
-	],
-	"filament_dev_ams_drying_ams_limitations": [
-		"1",
-		"0"
-	],
-	"filament_dev_ams_drying_heat_distortion_temperature": [
-		"75"
-	],
-	"filament_dev_drying_cooling_temperature": [
-		"55"
-	],
-	"filament_dev_ams_drying_temperature": [
-		"65",
-		"65",
-		"55",
-		"55"
-	],
-	"filament_dev_drying_softening_temperature": [
-		"60"
 	]
 }
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Glow @BBL A1",
 	"inherits": "BETA PETG Glow @base",
 	"from": "system",
-	"setting_id": "LudMQeiSJOLw0Aoy",
+	"setting_id": "BPGB04_06",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"50"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Glow @BBL A1M 0.4 nozzle",
 	"inherits": "BETA PETG Glow @base",
 	"from": "system",
-	"setting_id": "cl1Rl9hgrahhhSd3",
+	"setting_id": "BPGB04_03",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"50"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Glow @BBL H2D 0.4 nozzle",
 	"inherits": "BETA PETG Glow @base",
 	"from": "system",
-	"setting_id": "3s9w3mH6M4OdbrUV",
+	"setting_id": "BPGB04_09",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"30"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Glow @BBL X1C",
 	"inherits": "BETA PETG Glow @base",
 	"from": "system",
-	"setting_id": "wv5FRKdnsHaIFA7L",
+	"setting_id": "BPGB04_01",
 	"instantiation": "true",
 	"fan_min_speed": [
 		"20"
@@ -92,48 +92,5 @@
 	],
 	"filament_start_gcode": [
 		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-	],
-	"close_additional_fan_first_x_layers": [
-		"3"
-	],
-	"retraction_distances_when_ec": [
-		"0"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n\n"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0"
-	],
-	"filament_adhesiveness_category": [
-		"300"
-	],
-	"filament_dev_chamber_drying_bed_temperature": [
-		"80"
-	],
-	"filament_dev_ams_drying_time": [
-		"12",
-		"12",
-		"12",
-		"12"
-	],
-	"filament_dev_ams_drying_ams_limitations": [
-		"1",
-		"0"
-	],
-	"filament_dev_ams_drying_heat_distortion_temperature": [
-		"75"
-	],
-	"filament_dev_drying_cooling_temperature": [
-		"55"
-	],
-	"filament_dev_ams_drying_temperature": [
-		"65",
-		"65",
-		"55",
-		"55"
-	],
-	"filament_dev_drying_softening_temperature": [
-		"60"
 	]
 }
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Gradient @BBL A1",
 	"inherits": "BETA PETG Gradient @base",
 	"from": "system",
-	"setting_id": "L3hZggzEZUgUv0Qv",
+	"setting_id": "BPGB05_06",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"50"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Gradient @BBL A1M 0.4 nozzle",
 	"inherits": "BETA PETG Gradient @base",
 	"from": "system",
-	"setting_id": "zsITnsNFRG7IE6sR",
+	"setting_id": "BPGB05_03",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"50"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Gradient @BBL H2D 0.4 nozzle",
 	"inherits": "BETA PETG Gradient @base",
 	"from": "system",
-	"setting_id": "GqmCuPg6baUxeoYS",
+	"setting_id": "BPGB05_09",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"30"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Gradient @BBL X1C",
 	"inherits": "BETA PETG Gradient @base",
 	"from": "system",
-	"setting_id": "oYJjUiaCI4UBZ0ur",
+	"setting_id": "BPGB05_01",
 	"instantiation": "true",
 	"fan_min_speed": [
 		"20"
@@ -92,48 +92,5 @@
 	],
 	"filament_start_gcode": [
 		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-	],
-	"close_additional_fan_first_x_layers": [
-		"3"
-	],
-	"retraction_distances_when_ec": [
-		"0"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n\n"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0"
-	],
-	"filament_adhesiveness_category": [
-		"300"
-	],
-	"filament_dev_chamber_drying_bed_temperature": [
-		"80"
-	],
-	"filament_dev_ams_drying_time": [
-		"12",
-		"12",
-		"12",
-		"12"
-	],
-	"filament_dev_ams_drying_ams_limitations": [
-		"1",
-		"0"
-	],
-	"filament_dev_ams_drying_heat_distortion_temperature": [
-		"75"
-	],
-	"filament_dev_drying_cooling_temperature": [
-		"55"
-	],
-	"filament_dev_ams_drying_temperature": [
-		"65",
-		"65",
-		"55",
-		"55"
-	],
-	"filament_dev_drying_softening_temperature": [
-		"60"
 	]
 }
@@ -3,7 +3,7 @@
 	"name": "BETA PETG HF @BBL A1",
 	"inherits": "BETA PETG HF @base",
 	"from": "system",
-	"setting_id": "T2Ea25pM2u9BM7Oa",
+	"setting_id": "BPGB06_03",
 	"instantiation": "true",
 	"fan_cooling_layer_time": [
 		"15"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG HF @BBL A1M",
 	"inherits": "BETA PETG HF @base",
 	"from": "system",
-	"setting_id": "nO5R86dkDle1m5Pq",
+	"setting_id": "BPGB06_06",
 	"instantiation": "true",
 	"fan_cooling_layer_time": [
 		"15"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG HF @BBL H2D 0.4 nozzle",
 	"inherits": "BETA PETG HF @base",
 	"from": "system",
-	"setting_id": "YOBguayM9PiwkpfT",
+	"setting_id": "BPGB06_09",
 	"instantiation": "true",
 	"counter_coef_2": [
 		"0.007"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG HF @BBL X1C",
 	"inherits": "BETA PETG HF @base",
 	"from": "system",
-	"setting_id": "EG3h0IHVO1yyVNMs",
+	"setting_id": "BPGB06_00",
 	"instantiation": "true",
 	"fan_cooling_layer_time": [
 		"20"
@@ -85,48 +85,5 @@
 	],
 	"filament_start_gcode": [
 		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-	],
-	"close_additional_fan_first_x_layers": [
-		"3"
-	],
-	"retraction_distances_when_ec": [
-		"0"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n\n"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0"
-	],
-	"filament_adhesiveness_category": [
-		"300"
-	],
-	"filament_dev_chamber_drying_bed_temperature": [
-		"80"
-	],
-	"filament_dev_ams_drying_time": [
-		"12",
-		"12",
-		"12",
-		"12"
-	],
-	"filament_dev_ams_drying_ams_limitations": [
-		"1",
-		"0"
-	],
-	"filament_dev_ams_drying_heat_distortion_temperature": [
-		"75"
-	],
-	"filament_dev_drying_cooling_temperature": [
-		"55"
-	],
-	"filament_dev_ams_drying_temperature": [
-		"65",
-		"65",
-		"55",
-		"55"
-	],
-	"filament_dev_drying_softening_temperature": [
-		"60"
 	]
 }
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Heat Color Change @BBL A1",
 	"inherits": "BETA PETG Heat Color Change @base",
 	"from": "system",
-	"setting_id": "ZhHASdXFywqbRuBf",
+	"setting_id": "BPGB01_06",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"50"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Heat Color Change @BBL A1M 0.4 nozzle",
 	"inherits": "BETA PETG Heat Color Change @base",
 	"from": "system",
-	"setting_id": "YiFgzCJDAOW9YSjZ",
+	"setting_id": "BPGB01_03",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"50"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Heat Color Change @BBL H2D 0.4 nozzle",
 	"inherits": "BETA PETG Heat Color Change @base",
 	"from": "system",
-	"setting_id": "DpWgpTiKdm70Xt1i",
+	"setting_id": "BPGB01_09",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"30"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Heat Color Change @BBL X1C",
 	"inherits": "BETA PETG Heat Color Change @base",
 	"from": "system",
-	"setting_id": "3lJe6ftSHQDkQZ1S",
+	"setting_id": "BPGB01_01",
 	"instantiation": "true",
 	"fan_min_speed": [
 		"20"
@@ -92,48 +92,5 @@
 	],
 	"filament_start_gcode": [
 		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-	],
-	"close_additional_fan_first_x_layers": [
-		"3"
-	],
-	"retraction_distances_when_ec": [
-		"0"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n\n"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0"
-	],
-	"filament_adhesiveness_category": [
-		"300"
-	],
-	"filament_dev_chamber_drying_bed_temperature": [
-		"80"
-	],
-	"filament_dev_ams_drying_time": [
-		"12",
-		"12",
-		"12",
-		"12"
-	],
-	"filament_dev_ams_drying_ams_limitations": [
-		"1",
-		"0"
-	],
-	"filament_dev_ams_drying_heat_distortion_temperature": [
-		"75"
-	],
-	"filament_dev_drying_cooling_temperature": [
-		"55"
-	],
-	"filament_dev_ams_drying_temperature": [
-		"65",
-		"65",
-		"55",
-		"55"
-	],
-	"filament_dev_drying_softening_temperature": [
-		"60"
 	]
 }
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Marble @BBL A1",
 	"inherits": "BETA PETG Marble @base",
 	"from": "system",
-	"setting_id": "tSCDuE4dE44PyIwb",
+	"setting_id": "BPGB07_06",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"50"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Marble @BBL A1M 0.4 nozzle",
 	"inherits": "BETA PETG Marble @base",
 	"from": "system",
-	"setting_id": "n6dguOo5ZleD6Ec4",
+	"setting_id": "BPGB07_03",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"50"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Marble @BBL H2D 0.4 nozzle",
 	"inherits": "BETA PETG Marble @base",
 	"from": "system",
-	"setting_id": "RxCTxdvym4iNOB5j",
+	"setting_id": "BPGB07_09",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"30"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Marble @BBL X1C",
 	"inherits": "BETA PETG Marble @base",
 	"from": "system",
-	"setting_id": "3BgsPAgilo1MgtOV",
+	"setting_id": "BPGB07_01",
 	"instantiation": "true",
 	"fan_min_speed": [
 		"20"
@@ -92,48 +92,5 @@
 	],
 	"filament_start_gcode": [
 		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-	],
-	"close_additional_fan_first_x_layers": [
-		"3"
-	],
-	"retraction_distances_when_ec": [
-		"0"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n\n"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0"
-	],
-	"filament_adhesiveness_category": [
-		"300"
-	],
-	"filament_dev_chamber_drying_bed_temperature": [
-		"80"
-	],
-	"filament_dev_ams_drying_time": [
-		"12",
-		"12",
-		"12",
-		"12"
-	],
-	"filament_dev_ams_drying_ams_limitations": [
-		"1",
-		"0"
-	],
-	"filament_dev_ams_drying_heat_distortion_temperature": [
-		"75"
-	],
-	"filament_dev_drying_cooling_temperature": [
-		"55"
-	],
-	"filament_dev_ams_drying_temperature": [
-		"65",
-		"65",
-		"55",
-		"55"
-	],
-	"filament_dev_drying_softening_temperature": [
-		"60"
 	]
 }
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Matte @BBL A1",
 	"inherits": "BETA PETG Matte @base",
 	"from": "system",
-	"setting_id": "zYkrzQk11C98R31F",
+	"setting_id": "BPGB08_06",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"50"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Matte @BBL A1M 0.4 nozzle",
 	"inherits": "BETA PETG Matte @base",
 	"from": "system",
-	"setting_id": "rzX5oP4037Ex5Chh",
+	"setting_id": "BPGB08_03",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"50"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Matte @BBL H2D 0.4 nozzle",
 	"inherits": "BETA PETG Matte @base",
 	"from": "system",
-	"setting_id": "sqz8Vluq7GMd3siv",
+	"setting_id": "BPGB08_09",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"30"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Matte @BBL X1C",
 	"inherits": "BETA PETG Matte @base",
 	"from": "system",
-	"setting_id": "NXgqYCqHeVCgFF3I",
+	"setting_id": "BPGB08_01",
 	"instantiation": "true",
 	"fan_min_speed": [
 		"20"
@@ -92,48 +92,5 @@
 	],
 	"filament_start_gcode": [
 		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-	],
-	"close_additional_fan_first_x_layers": [
-		"3"
-	],
-	"retraction_distances_when_ec": [
-		"0"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n\n"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0"
-	],
-	"filament_adhesiveness_category": [
-		"300"
-	],
-	"filament_dev_chamber_drying_bed_temperature": [
-		"80"
-	],
-	"filament_dev_ams_drying_time": [
-		"12",
-		"12",
-		"12",
-		"12"
-	],
-	"filament_dev_ams_drying_ams_limitations": [
-		"1",
-		"0"
-	],
-	"filament_dev_ams_drying_heat_distortion_temperature": [
-		"75"
-	],
-	"filament_dev_drying_cooling_temperature": [
-		"55"
-	],
-	"filament_dev_ams_drying_temperature": [
-		"65",
-		"65",
-		"55",
-		"55"
-	],
-	"filament_dev_drying_softening_temperature": [
-		"60"
 	]
 }
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Metallic @BBL A1",
 	"inherits": "BETA PETG Metallic @base",
 	"from": "system",
-	"setting_id": "1baUIJ3P8n6DcyRc",
+	"setting_id": "BPGB09_06",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"50"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Metallic @BBL A1M 0.4 nozzle",
 	"inherits": "BETA PETG Metallic @base",
 	"from": "system",
-	"setting_id": "LMsVDqsChBksLNqL",
+	"setting_id": "BPGB09_03",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"50"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Metallic @BBL H2D 0.4 nozzle",
 	"inherits": "BETA PETG Metallic @base",
 	"from": "system",
-	"setting_id": "giq8BW6qcwz91e4C",
+	"setting_id": "BPGB09_09",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"30"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Metallic @BBL X1C",
 	"inherits": "BETA PETG Metallic @base",
 	"from": "system",
-	"setting_id": "tZzoc2LdgWkpEiox",
+	"setting_id": "BPGB09_01",
 	"instantiation": "true",
 	"fan_min_speed": [
 		"20"
@@ -92,48 +92,5 @@
 	],
 	"filament_start_gcode": [
 		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-	],
-	"close_additional_fan_first_x_layers": [
-		"3"
-	],
-	"retraction_distances_when_ec": [
-		"0"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n\n"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0"
-	],
-	"filament_adhesiveness_category": [
-		"300"
-	],
-	"filament_dev_chamber_drying_bed_temperature": [
-		"80"
-	],
-	"filament_dev_ams_drying_time": [
-		"12",
-		"12",
-		"12",
-		"12"
-	],
-	"filament_dev_ams_drying_ams_limitations": [
-		"1",
-		"0"
-	],
-	"filament_dev_ams_drying_heat_distortion_temperature": [
-		"75"
-	],
-	"filament_dev_drying_cooling_temperature": [
-		"55"
-	],
-	"filament_dev_ams_drying_temperature": [
-		"65",
-		"65",
-		"55",
-		"55"
-	],
-	"filament_dev_drying_softening_temperature": [
-		"60"
 	]
 }
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Transparent @BBL A1",
 	"inherits": "BETA PETG Transparent @base",
 	"from": "system",
-	"setting_id": "86loYV5S4bgO2FOx",
+	"setting_id": "BPGB10_05",
 	"instantiation": "true",
 	"filament_long_retractions_when_cut": [
 		"1"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Transparent @BBL A1M",
 	"inherits": "BETA PETG Transparent @base",
 	"from": "system",
-	"setting_id": "c2xTYO07RC2G2xsv",
+	"setting_id": "BPGB10_02",
 	"instantiation": "true",
 	"filament_long_retractions_when_cut": [
 		"1"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Transparent @BBL H2D 0.4 nozzle",
 	"inherits": "BETA PETG Transparent @base",
 	"from": "system",
-	"setting_id": "GkC5T0RX0meiLVKg",
+	"setting_id": "BPGB10_06",
 	"instantiation": "true",
 	"filament_deretraction_speed": [
 		"nil",
@@ -3,7 +3,7 @@
 	"name": "BETA PETG Transparent @BBL X1C",
 	"inherits": "BETA PETG Transparent @base",
 	"from": "system",
-	"setting_id": "doyjzbrEn9akgjvG",
+	"setting_id": "BPGB10_00",
 	"instantiation": "true",
 	"filament_long_retractions_when_cut": [
 		"1",
@@ -80,48 +80,5 @@
 	],
 	"filament_start_gcode": [
 		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-	],
-	"close_additional_fan_first_x_layers": [
-		"3"
-	],
-	"retraction_distances_when_ec": [
-		"0"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n\n"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0"
-	],
-	"filament_adhesiveness_category": [
-		"300"
-	],
-	"filament_dev_chamber_drying_bed_temperature": [
-		"80"
-	],
-	"filament_dev_ams_drying_time": [
-		"12",
-		"12",
-		"12",
-		"12"
-	],
-	"filament_dev_ams_drying_ams_limitations": [
-		"1",
-		"0"
-	],
-	"filament_dev_ams_drying_heat_distortion_temperature": [
-		"75"
-	],
-	"filament_dev_drying_cooling_temperature": [
-		"55"
-	],
-	"filament_dev_ams_drying_temperature": [
-		"65",
-		"65",
-		"55",
-		"55"
-	],
-	"filament_dev_drying_softening_temperature": [
-		"60"
 	]
 }
@@ -3,7 +3,7 @@
 	"name": "BETA PETG UV Color Change @BBL A1",
 	"inherits": "BETA PETG UV Color Change @base",
 	"from": "system",
-	"setting_id": "CeepF0rRLZ5fzBwm",
+	"setting_id": "BPGB11_06",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"50"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG UV Color Change @BBL A1M 0.4 nozzle",
 	"inherits": "BETA PETG UV Color Change @base",
 	"from": "system",
-	"setting_id": "Atb1esrVdoWBK97e",
+	"setting_id": "BPGB11_03",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"50"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG UV Color Change @BBL H2D 0.4 nozzle",
 	"inherits": "BETA PETG UV Color Change @base",
 	"from": "system",
-	"setting_id": "Ic0NUfwLmR0NSh5q",
+	"setting_id": "BPGB11_09",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"30"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG UV Color Change @BBL X1C",
 	"inherits": "BETA PETG UV Color Change @base",
 	"from": "system",
-	"setting_id": "BUKCpukEUmocfz3v",
+	"setting_id": "BPGB11_01",
 	"instantiation": "true",
 	"fan_min_speed": [
 		"20"
@@ -92,48 +92,5 @@
 	],
 	"filament_start_gcode": [
 		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-	],
-	"close_additional_fan_first_x_layers": [
-		"3"
-	],
-	"retraction_distances_when_ec": [
-		"0"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n\n"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0"
-	],
-	"filament_adhesiveness_category": [
-		"300"
-	],
-	"filament_dev_chamber_drying_bed_temperature": [
-		"80"
-	],
-	"filament_dev_ams_drying_time": [
-		"12",
-		"12",
-		"12",
-		"12"
-	],
-	"filament_dev_ams_drying_ams_limitations": [
-		"1",
-		"0"
-	],
-	"filament_dev_ams_drying_heat_distortion_temperature": [
-		"75"
-	],
-	"filament_dev_drying_cooling_temperature": [
-		"55"
-	],
-	"filament_dev_ams_drying_temperature": [
-		"65",
-		"65",
-		"55",
-		"55"
-	],
-	"filament_dev_drying_softening_temperature": [
-		"60"
 	]
 }
@@ -3,7 +3,7 @@
 	"name": "BETA PETG-CF @BBL A1 0.4 nozzle",
 	"inherits": "BETA PETG-CF @base",
 	"from": "system",
-	"setting_id": "2ysJdw1MuW8VLmny",
+	"setting_id": "BPGB12_05",
 	"instantiation": "true",
 	"fan_cooling_layer_time": [
 		"30"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG-CF @BBL A1M 0.4 nozzle",
 	"inherits": "BETA PETG-CF @base",
 	"from": "system",
-	"setting_id": "eZsa6noZZUahQeBp",
+	"setting_id": "BPGB12_04",
 	"instantiation": "true",
 	"filament_max_volumetric_speed": [
 		"9"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG-CF @BBL H2D 0.4 nozzle",
 	"inherits": "BETA PETG-CF @base",
 	"from": "system",
-	"setting_id": "YRUDQs5jE1d1BGTY",
+	"setting_id": "BPGB12_08",
 	"instantiation": "true",
 	"counter_coef_2": [
 		"0.00565"
@@ -3,7 +3,7 @@
 	"name": "BETA PETG-CF @BBL P1P 0.4 nozzle",
 	"inherits": "BETA PETG-CF @base",
 	"from": "system",
-	"setting_id": "i1OjgC3I96a1Trb8",
+	"setting_id": "BPGB12_03",
 	"instantiation": "true",
 	"fan_cooling_layer_time": [
 		"30"
--- a/Show More
+++ b/Show More