Draw the Preview's Toolpath Segments From an Index Buffer

The preview's frame cost is dominated by one call: a single instanced draw of
every visible toolpath segment. On a tall multi-filament print the wipe tower
supplies most of those segments, which is why the preview of a large tower is
slow and why shrinking the layer range speeds it up again.

That draw is not fill bound. Shrinking the model to about a fortieth of its
screen area moved the frame from 419 ms to 401 ms, so the cost is per segment,
not per pixel, and it is paid in the vertex shader: five texelFetch calls plus
several cross/normalize per invocation.

Each segment is a box of eight corners, but it was submitted with
glDrawArraysInstanced over a 24 entry array, so every corner was transformed
once per triangle that touches it and the shader ran 24 times per segment. The
same 24 entries are now an element buffer over the eight distinct corners, which
lets the post-transform cache reuse them and drops the shader to 8 runs per
segment. The triangles, their winding and the vertex_id each corner receives are
unchanged.

Measured over 100 frames on the 636-layer, 351k-vertex three-filament fixture,
the segment draw goes from 381 ms to 322 ms per frame. That is a software
rasterizer, where triangle setup dominates and understates the win; the drop in
shader invocations is the transferable part.

Verified by loading the same project in this build and in a build of the parent
commit and comparing the canvas across three states - the default view, a
rotated camera, and a reduced layer range: pixel identical in all three. The
rotated case matters because the shader picks its corner offsets from the camera
direction. The only pixels that differ anywhere on screen are in the G-code text
panel, which prints a per-process object id that varies between any two runs.

.claude/skills/orca-profiles/SKILL.md

@@ -58,6 +58,9 @@ Paths below are relative to this skill. Commands run from the repository root.
 9. **Run the full profile checks before reporting completion.** A vendor-scoped pass is only a
    development loop. Review also covers version bumps, assets, non-default processes and hardware
    tuning that CI cannot establish.
+10. **One all-printer preset per product; color is a runtime property, never a preset.** Never ship
+    presets that differ only by color — CI accepts them, so this is a review call. See
+    [color is a runtime property](references/filament-profiles.md#color-is-a-runtime-property).
 
 ## Creating or modifying a profile
 
@@ -107,6 +110,7 @@ Paths below are relative to this skill. Commands run from the repository root.
 | A setting has no effect | Key spelling/type, `handle_legacy`, or a config key placed on a `machine_model` |
 | A preset exists but is not selectable | Index registration, `instantiation`, installation and compatibility |
 | A filament is missing, duplicated, or matches the wrong spool | [Compatibility and alias shadowing](references/filament-profiles.md#compatible_printers); [ids](references/ids.md) |
+| Presets differ only by color, or an all-printer library preset lacks `@System` | [Color is a runtime property](references/filament-profiles.md#color-is-a-runtime-property) |
 | A bed temperature is ignored | [Plate-specific temperature keys](references/filament-profiles.md#bed-temperature-is-twelve-keys-not-one) |
 | A change is absent from the running app | Version bump and [installed profile location](references/validation.md#testing-in-the-app) |
 | A check fails | [Error → remedy](references/validation.md#error--remedy) |

.claude/skills/orca-profiles/references/filament-profiles.md

@@ -52,6 +52,15 @@ a brand means adding a folder here; the folder name is a directory label only
   collection, so there is no duplicate-name error.
 - You may inherit from an instantiated preset as well as from a base; it is common.
 
+## Color is a runtime property
+
+`filament_id` identifies a product, not a color; filament sync/AMS reads the color from the spool at
+runtime. A product ships one all-printer preset and the color is chosen at runtime — never a sibling
+preset that differs only by color. A material family (PLA vs PLA Matte vs PLA Silk) is a new product; a
+color is not. A printer tune keeps the product alias and does not multiply per color either.
+
+CI does not catch this — per-color presets pass `check` — so it is a review call.
+
 ## The two most common contributions
 
 **A printer vendor tuning a generic.** Keep the `Generic X` base name so the alias shadows the library

.claude/skills/orca-profiles/references/naming.md

@@ -35,9 +35,10 @@ toolhead, a multi-material build) may drop the suffix — still an exact referen
 ## `process`
 
 `<layer height>mm <quality> @<target>` — [process-profiles.md](process-profiles.md#naming) has the
-quality ladder and the `fdm_process_*` base names. The `@<target>` is a human label, not a reference: it
-usually does not equal a real variant, and compatibility comes from the resolved `compatible_printers`
-list or condition.
+quality ladder and the `fdm_process_*` base names. The quality label stays before `@` and the printer
+target after it: a printer model in the quality slot leaves the tier undescribed. The `@<target>` is a
+human label, not a reference: it usually does not equal a real variant, and compatibility comes from the
+resolved `compatible_printers` list or condition.
 
 ## `filament`
 
@@ -46,12 +47,41 @@ to the first `@`; the target half is a label except for reserved forms:
 
 - `@base` — a non-instantiated product root. `@base` is convention; a base is really identified by
   `instantiation: "false"` and no `setting_id` ([the three-part shape](filament-profiles.md#the-three-part-shape)).
-- `@System` — the OrcaFilamentLibrary selectable shim. The literal `Generic <mat> @System` is
-  load-bearing for 3MF/project recovery, beyond the alias rule ([alias shadowing](filament-profiles.md#alias-shadowing)).
+- `@System` — the OrcaFilamentLibrary selectable shim, and the convention for an all-printer product
+  (`<Product> @System`, empty `compatible_printers`); not enforced, so a deviation is worth a review
+  comment. The literal `Generic <mat> @System` is load-bearing for 3MF/project recovery, beyond the
+  alias rule ([alias shadowing](filament-profiles.md#alias-shadowing)).
 - `@<Vendor>`, `@<Vendor> <Model>`, `@<Vendor> <Model> <nozzle> nozzle` — printer tunes, BBL's shape.
   Other vendors differ (a bare model, a printer serial, Creality's `@<Model>-all`). Specificity is judged
   from `compatible_printers`, not the name
   ([one variant, one profile](filament-profiles.md#overlapping-coverage-one-variant-one-profile-per-product)).
+- Color is not part of the product name: `<Product> <Color>` presets are not authored; the color is
+  chosen at runtime
+  ([color is a runtime property](filament-profiles.md#color-is-a-runtime-property)).
+
+## Checking names
+
+Check every newly added profile's `name` against its type and role: model, selectable preset or base.
+Apply the same checks to an intentional name change. The human-readable naming shapes are not enforced
+by `check`: inspect the added or renamed profiles in the diff, using neighbouring names as context and
+following the bundle's established style where the type-specific conventions allow variation.
+
+For bases (`instantiation: "false"`), use the type-specific conventions:
+
+| Type | Base names |
+| --- | --- |
+| `machine` | `fdm_machine_common`, `fdm_<vendor>_common`, or an established machine-family base name |
+| `process` | `fdm_process_*`, including shared roots and per-layer-height / per-nozzle bases such as `fdm_process_single_0.20` |
+| `filament` | `fdm_filament_*` material roots or `<Product> @base` product roots |
+
+Shared base names across bundles are intentional, including product roots such as `Fiberon PA6-CF @base`.
+Investigate a newly authored base that retains an unrelated selectable preset's name from a copy.
+
+**Name uniqueness is checked by CI.** `check_preset_name_uniqueness` checks type + name within each
+bundle. `check_machine_model_name_uniqueness` checks model names across the entire tree, even with
+`--vendor`: `Preset::get_printer_type` matches `printer_model` against all vendors' models and returns
+the first match, so a duplicate makes lookup depend on vendor order. Both run as part of
+`python3 scripts/orca_profile_tool.py check`.
 
 ## Not the same as the filename
 

.claude/skills/orca-profiles/references/review-checklist.md

@@ -15,7 +15,9 @@ The table highlights gaps that need human review. What CI *does* run:
 | Whether the intended default survived compatibility selection | The sweep can select a different compatible preset |
 | A dangling `compatible_printers` inside an `instantiation: "false"` base | A base never becomes a `Preset`, so the reference check never sees it (a bad `inherits` in a base *is* caught) |
 | A `renamed_from` whose old name is still a live preset | The redirect is inert while a live preset carries that name |
+| A preset differentiated only by color, or an all-printer library preset without `@System` | Per-color presets split one product across ids and the selector fills with near-duplicates; CI stays green |
 | Per-extruder vector length on a multi-nozzle printer | Silently padded (with the **first** value) or truncated |
+| A name that ignores its type's convention — a model in a `process` quality slot, or an unrelated target label left in a copied preset | The selector misrepresents the preset's quality or intended printer |
 
 ## 1. Was the vendor `version` bumped?
 
@@ -168,6 +170,15 @@ vendor, and a filename that disagrees with the preset's `name` (common; the load
 Check for Windows-invalid characters, reserved device names, trailing path-component spaces/dots,
 and case mismatches in `sub_path` or asset paths. See [cross-platform paths](validation.md#cross-platform-paths).
 
+## 16. Do the preset names follow the conventions?
+
+Check **every newly added profile and intentional name change**, including models and bases,
+against [the naming conventions](naming.md#checking-names). Preserve shipped names during
+ordinary tuning; renaming a shipped selectable preset requires the migration in item 4.
+
+*Why:* CI checks name uniqueness, but does not enforce the naming conventions. Catch naming
+mistakes before the names ship and existing projects depend on them.
+
 ---
 
 ## Reporting the review

CMakeLists.txt

@@ -1122,7 +1122,6 @@ function(orcaslicer_copy_dlls target config postfix output_dlls)
         ${_out_dir}/swresample-5.dll
         ${_out_dir}/swscale-8.dll
         ${_out_dir}/avutil-59.dll
-        PARENT_SCOPE
     )
     list(APPEND _dll_list ${_occt_staged})
     set(${output_dlls} ${_dll_list} PARENT_SCOPE)

TEXTURE_DISPLACEMENT.md

@@ -1,581 +0,0 @@
-# Texture Displacement - Technical Notes
-
-Branch: `feature/texture_displacement`. Reference for the feature as it stands: what it does, how the
-algorithms work, and where the code lives.
-
-## What it does
-
-A paint-style gizmo (`GLGizmoTextureDisplacement`) that lets you:
-- Paint one or more "layers" onto a model's surface, each a height-map texture with its own
-  depth/tiling/rotation/offset/invert/tile-mode/projection-mode/blend-mode.
-- Pick a texture from a shipped library (`resources/textures/displacement/`) or import your own
-  (saved into `<data_dir>/textures/displacement/`, kept separate so app updates can't clobber it).
-- Combine overlapping layers with image-editor-style blend modes (Add/Subtract/Multiply/Divide).
-- Preview the true displaced result live, before baking (background job, not on the UI thread).
-- Preview via a fast GPU shader instead (no real geometry movement) for a lighter-weight alternative.
-- Bake into real mesh geometry on demand, restricted to the painted area only.
-- Remesh and subdivide so a low-poly model has enough vertices to show fine detail.
-- Unwrap a painted patch with a real CGAL LSCM parameterization and view it in a dedicated,
-  dockable 2D "UV Editor" pane.
-
-## Standard vs Pro mode
-
-A two-position slider in the panel header, right of the Dock/Undock button.
-
-**Pro** shows every mesh-preparation control; Remesh, Subdivide and Bake are run separately by the user,
-in whatever order they like.
-
-**Standard** hides all of it and folds one fixed recipe into the Bake button, because a height map only
-ever *moves vertices that already exist* - painting onto an imported 12-triangle box and pressing Bake
-would otherwise do nothing visible. Standard's Bake is:
-
-1. `plan_remesh()` + `replace_mesh_keep_all_paint()` - isotropic remesh to 1 mm, sharp edges above 40
-   degrees protected. Gives the subdivider an even starting density whatever the input looked like.
-2. `plan_adaptive_subdivision()` + `apply_adaptive_subdivision()` - feature-adaptive refinement, max
-   edge 20 mm, detail 0.02 mm, min edge 0.02 mm.
-3. `bake()` - the ordinary background displacement job.
-
-Both preparation stages are *planned* before the undo snapshot and *applied* after it, so a stage with
-nothing to do is skipped without leaving an empty undo step. The standalone Pro buttons share the same
-plan/apply split.
-
-**All three stages sit under one undo step.** `Plater::take_snapshot()` records the state *before* the
-change, so a single snapshot taken at the top of `bake_standard()` means one Undo returns the mesh to
-exactly what was imported. `TextureDisplacementBakeInput::take_snapshot` lets the caller say who owns
-the undo step - true for the Pro-mode button, false for the pipeline, whose background job commits long
-after that snapshot's scope has closed.
-
-The presets live in one place (`STD_*` constants) and `apply_standard_mode_presets()` pins the hidden
-controls to them every frame while Standard is active, so the live preview cannot disagree with what
-Bake will do. Switching to Standard also closes the subdivision preview, whose controls have just gone.
-
-One control survives into Standard: **"Added triangles (k)"**, the subdivision budget. It is deliberately
-*not* pinned - pinning would fight the user's own slider every frame - because unlike the rest of the
-recipe its right value depends on the part rather than on the method (a big model, or a fine texture,
-simply needs more triangles). Default 1500. The widget is one lambda shared by both layouts.
-
-Standard remeshes *after* painting, so the remesh has to preserve paint: `ModelVolume::restore_painting()`
-only remaps the four standard channels, so `replace_mesh_keep_all_paint()` additionally runs
-`TriangleSelector::remap_painting()` over the eight texture-displacement masks. The Pro Remesh button
-goes through the same helper. If the remap comes back empty the pipeline stops with a message rather
-than baking a flat mesh.
-
-## Architecture
-
-### Data model (per `ModelVolume`)
-
-Each of up to `TEXTURE_DISPLACEMENT_MAX_LAYERS` (8) layers gets its **own independent
-`FacetsAnnotation`** paint mask - the same `TriangleSelector`/`FacetsAnnotation` machinery every other
-paint gizmo (FdmSupports, Seam, MMU, FuzzySkin) already uses, just one full instance per layer slot
-instead of one per volume. This is what makes layered/blended painting work for free: the same triangle
-can be `ENFORCER` in layer 2's mask and layer 5's mask simultaneously, and at bake/preview time each
-layer displaces the surface left by the previous one (image-editor-layer semantics).
-
-Whole-stack settings (border handling, post-process smoothing) live beside the layers in
-`texture_displacement_options` (`TextureDisplacementOptions`), since they belong to no single layer.
-
-### Bake algorithm (`libslic3r/TextureDisplacement.cpp`)
-
-`build_texture_displacement(base_mesh, layers, facets_data, options)` is **accumulate-then-displace,
-and topology-preserving**: the returned mesh has exactly the input's vertices and triangles, in the
-same order - only the positions of displaced vertices differ.
-
-1. `its_compactify_vertices()` on a copy of the input. In practice a no-op (it only drops
-   *unreferenced* vertices, and preserves the order and indices of the rest). It is there to
-   guarantee the index alignment step 3 depends on.
-2. Area-weighted vertex normals of the **undisplaced** mesh, computed once. Every layer both projects
-   and displaces along these, so a vertex covered by several layers moves along one single well-defined
-   direction. Where the paint does *not* cover every triangle around a vertex, the normal is recomputed
-   from the painted triangles alone (the union over all layers, so it stays one direction per vertex):
-   on the rim of a fully painted top face the whole-mesh normal is the 45-degree bisector it shares with
-   the side wall, and displacing along that flares the rim outwards instead of raising it. Interior
-   vertices are unaffected - all their triangles are painted, so the two normals coincide. Paint
-   coverage per original triangle comes straight off `TriangleSplittingData::triangles_to_split`.
-3. For each layer in slot order: deserialize its stored paint mask into a `TriangleSelector` against
-   the **base mesh** (never against a previous layer's output), then
-   `selector.get_facets_strict(ENFORCER)` → the painted patch. Two facts are exploited:
-   - `get_facets_strict()` returns the mesh's **entire** referenced vertex array regardless of which
-     state was asked for - only `.indices` is filtered by state. So `get_facets_strict(ENFORCER)`
-     and `get_facets_strict(NONE)` share identical vertex indexing, which is what lets boundary
-     detection be a plain index check instead of a position-hash lookup.
-   - The selector's vertex array *starts with* the mesh's own vertices (extra ones created where a
-     brush stroke split a triangle are appended after them), and `get_facets_strict()` emits the
-     referenced ones in order. Combined with step 1, **selector vertex index `i` is our vertex `i`**.
-     Split vertices live past the end of our array and are simply skipped - they sit on the paint
-     boundary anyway (splitting only happens at partial coverage).
-4. A vertex used by at least one **unpainted** triangle is a border vertex. Whether it moves is
-   `TextureDisplacementOptions::displace_border`, and it does by default. Nothing can tear: the bake is
-   topology-preserving, so a border vertex is *one* vertex shared by both regions and moving it simply
-   tilts the unpainted triangles that use it. Pinning it instead clamps the outermost ring of relief to
-   zero, which on a fully painted face collapses the pattern into a ring of steep ramps at the edge; it
-   is kept as an option for when the relief must not spill past the paint at all. Either way the border
-   drives the `edge_smoothing` falloff.
-5. Per interior vertex: sample the height texture (`sample_layer_height()`, see Projection methods)
-   and fold `height * depth_mm * (invert ? -1 : 1)` into that vertex's running total via the layer's
-   `TextureBlendMode` (see Blend modes). A `visited` set makes each layer fold in exactly **once**
-   per vertex, no matter how many of the patch's triangles share it - otherwise a Multiply/Subtract
-   layer would apply two or three times over depending on local triangle fan-out.
-6. Move each touched vertex along its (step 2) normal by its accumulated total.
-7. Optionally (`TextureDisplacementOptions::smooth_*`) relax the result - see Post-process smoothing.
-
-### Post-process smoothing
-
-`smooth_mesh_vertices(mesh, movable, strength, iterations)` - Laplacian relaxation, run after all layers
-have been folded in, restricted to the vertices flagged in `movable`. Each pass moves a movable vertex a
-`strength` fraction of the way to the average of its one-ring, read from a **snapshot** of the previous
-pass so the result does not depend on vertex order (a Gauss-Seidel sweep would smooth several times as
-hard at the end of the array as at the start). Neighbours come from a CSR-style adjacency built once per
-call. Topology-preserving, like the bake.
-
-Its job is to round off the hard steps a bitmap height map leaves behind - a different knob from
-`TextureDisplacementLayer::smoothing`, which blurs the *height map* before it is ever sampled.
-
-Two ways in, sharing one set of settings on the volume:
-- The **"Smooth result"** checkbox + "Smoothing (%)" / "Passes" ride along with Preview and Bake.
-  `movable` is exactly the set of vertices the displacement moved, so the untouched part of the model
-  keeps its exact geometry and the ring just outside the displaced set anchors the relaxation (the
-  relief cannot creep outward).
-- **"Smooth baked mesh now"** (`GLGizmoTextureDisplacement::smooth_model()`) applies the same settings to
-  the volume's *committed* geometry, for relief that is already baked in. `movable` there is the painted
-  triangles' vertices. Because smoothing never touches the triangle list, this is the one geometry
-  operation in the gizmo that keeps **every** paint channel verbatim - it saves and restores the eight
-  texture-displacement masks around `set_mesh()` rather than remapping or dropping them.
-
-**"Ignore outer ring"** (`smooth_skip_border`, on by default) drops the patch's own outermost ring of
-vertices from `movable`. That ring's neighbours *outside* the paint never move, so relaxing it drags the
-rim of the relief down toward the flat surface and the pattern comes out half-melted where it meets the
-edge. Held out, the border keeps the full depth the texture asked for and only the interior relaxes.
-Turning it off softens the outer edge deliberately (a blunter version of the per-layer edge-smoothing
-falloff). This is the *smoothing* rim, independent of whether that rim is displaced at all
-(`displace_border`, step 4 above); both default to keeping the border sharp.
-
-### Blend modes
-
-`TextureBlendMode` {Add, Subtract, Multiply, Divide}, per layer, applied per vertex against the
-total accumulated by the layers **below** it (lower slots). The quantity blended is a signed
-displacement in **mm**, not a pixel value.
-
-Add/Subtract are self-explanatory. Multiply/Divide are *scaling* operations and so need a unit
-convention: they treat the layer's own value as a **factor relative to 1 mm**. That makes `depth_mm`
-a gain, and - the property that makes a Multiply layer usable as a mask - a layer with depth 1 mm
-sampling a white (1.0) texel multiplies by exactly 1, i.e. leaves the layers below unchanged.
-Divide floors its divisor's magnitude at 0.05: a black texel samples to *exactly* zero, so the divisor
-really does hit zero in ordinary use, and an unbounded `1/0` would fling vertices thousands of mm away
-and poison the mesh's bounding box (and every plate/print-volume check downstream). The floor doubles as
-a cap on how far Divide can amplify the relief beneath it: at most 20×.
-
-The **lowest painted layer ignores its blend mode**: it has nothing beneath it, and Multiply/Divide
-against an implicit zero base would annihilate (or blow up) it. Enforced in
-`build_texture_displacement()` (the first layer to reach a given vertex always folds in additively) and
-surfaced in the UI, which labels that layer "Base layer" instead of offering a control that does nothing.
-
-### Projection methods
-
-Five choices per layer (`TextureProjectionMethod`), all funneling through `apply_uv_transform()`
-(scale by `1/tiling_scale`, rotate by `rotation_deg`, add `offset`). They are dispatched by
-`sample_layer_height()`, which returns a **height**, not a UV - because Triplanar takes three
-texture samples per vertex and so has no single UV that represents it.
-
-- **Triplanar** (default) - samples the texture on all three world planes (`(y,z)`, `(x,z)`, `(x,y)`)
-  and blends the three by the vertex's own normal raised to `TRIPLANAR_BLEND_SHARPNESS` (4). Hard-picking
-  the single axis most aligned with the normal instead is discontinuous wherever that dominant axis
-  flips: on a +X face the planar coordinate is `(y, z)`, on a −Y face it is `(x, z)`, so at the shared
-  edge `u` jumps. A weighted blend is continuous across the transition by construction, since the weight
-  of the axis being left behind falls smoothly to zero. This removes the hard *seam*; some cross-fade
-  blurring in the band right at a 90° edge is inherent to triplanar mapping. A genuinely seam-free wrap
-  around a box needs a real unwrap - that is what the LSCM mode is for.
-- **Cylindrical** - wraps around an axis through the patch centroid, axis auto-picked as the world
-  axis *least* aligned with the average normal (perpendicular to the outward radial normal, as a
-  cylinder's own axis would be). `u = angle * local_radius` (arc length in mm), `v = distance along
-  axis`. An approximation, not an exact fit for arbitrary geometry, and the axis/centre are not
-  user-overridable.
-- **Spherical** - longitude/latitude around the centroid, scaled by local radius. Same caveat.
-- **LSCM** - real UV unwrap via `MeshBoolean::cgal::parameterize_lscm()` (CGAL's
-  `Surface_mesh_parameterization` package, LSCM algorithm). Computed **once per patch** (not
-  per-vertex like the others - it's a single global least-squares solve), then each vertex looks up
-  its precomputed UV. Requires the patch to be a single topological disk (one connected component,
-  one boundary loop) - `compute_lscm_uvs()` returns empty and the layer falls back to Triplanar if not
-  (e.g. multiple disconnected painted islands, or a fully closed patch). CGAL's parameterizer needs a
-  mesh with no isolated/unreferenced vertices, but `get_facets_strict()` returns the *whole* mesh's
-  vertex array - so `compact_patch_with_map()` builds a clean sub-mesh plus an index map back to the
-  original vertex numbering, purely local to this file.
-- **ViewProjected** ("From view") - a flat projection along a fixed direction captured from the 3D
-  camera, like a slide projector. `capture_view_projection()` takes the camera's right/up axes,
-  transforms them into the volume's *local* frame (so the projection rides along if the part is later
-  moved), and stores them as `TextureDisplacementLayer::view_project_right/up` (unit vectors, so the
-  projected coordinate stays in mm and `tiling_scale` keeps meaning mm). `sample_layer_height()`
-  projects `Vec2f(dot(pos, right), dot(pos, up))`. Single-valued per point, so - like LSCM but unlike
-  blended Triplanar - the fast preview and UV-check overlay precompute it per vertex
-  (`compute_layer_vertex_uvs()`) and drive the shader's `use_vertex_uv` path. Faces angled away from
-  the projector smear; that is inherent to view projection.
-
-  Two companions to this mode:
-  - **Projection frame overlay** (`TextureProjectorFrame`, see below) - a semi-transparent window
-    dragged over the 3D view whose border becomes the projection's edge. Applying it stores an exact
-    **projective** map in `view_project_matrix`, which supersedes the affine `right`/`up` axes above
-    for that layer (`view_project_projective`).
-  - **"Project only on visible"** (`select_visible_faces()`) - repaints the layer with exactly the
-    facets the camera can see, so the projected area matches the viewpoint the projector was captured
-    from. Two tests: a facing test (normal vs. view direction, per triangle - under perspective the
-    view direction varies across the model, so it is taken from the eye to each centroid), then
-    `MeshRaycaster::get_unobscured_idxs()` on the survivors to drop facets hidden behind other
-    geometry, so a concave part's far inner wall is correctly excluded. One ray query per front-facing
-    facet, hence click-driven (on the checkbox and on each "Capture current view"), never per frame.
-    It **replaces** the layer's paint rather than adding to it - "project onto what I can see" would
-    otherwise accumulate every angle the user had ever looked from.
-
-### Manual seams and island cutting
-
-`TextureDisplacementLayer::lscm_seam_edges` - undirected mesh-vertex-index edge pairs the unwrap is
-forced to cut along, on top of the dihedral-angle seams. `segment_into_charts()` takes a set of these
-(translated from mesh → compacted-patch numbering inside `compute_patch_unwrap()`) and refuses to
-union two triangles across a marked edge whatever their angle. Both the unwrap cache key and the
-gizmo's `UVEditorState` include the seam list, so marking a seam (which leaves the paint mask
-untouched) still forces a re-solve. Like the paint masks, seams are mesh-index-space and so dropped on
-any topology change.
-
-Two ways to write to it:
-- **Mark seam (manual)** - a "Mark seams" click mode (`m_seam_edit_mode`) that suppresses painting. A
-  click raycasts the volume (`m_c->raycaster()->raycasters()[idx]->unproject_on_mesh()`, `idx` = the
-  volume's slot among model-part volumes), finds the facet's edge nearest the hit point, and toggles it.
-  Marked edges render as a red overlay (`render_seam_overlay()`), pulled toward the camera so they read
-  on top. This is the Blender mark-seam workflow.
-- **Cut island (auto)** - `cut_island()` takes the selected chart's triangles (back-mapped from the
-  unwrap via `source_vertex`), finds their 3D bounding box, and marks every edge that straddles the
-  mid-plane perpendicular to the longest axis. The re-unwrap then splits the chart across its narrow
-  waist. Exposed as the UV pane's **Cut** button.
-
-### UV-check overlays (checker / distortion)
-
-`resources/shaders/{110,140}/texture_displacement_uvcheck.{vs,fs}`, one shader with a `mode` uniform,
-drawn over the painted patch (`rebuild_uvcheck_mesh()`/`render_uvcheck_mesh()`, P3N3T2: `normal.x` =
-distortion, `tex_coord` = uv), pulled forward with a polygon offset. **Checker** samples a procedural
-checkerboard at the layer's uv (per-vertex for LSCM/ViewProjected, in-shader triplanar otherwise) -
-squares that stay square mean low distortion. **Distortion** colours each triangle blue→green→red by
-`log2(uv_area / surface_area)` centred on the patch's *median* stretch (so a globally-scaled unwrap
-reads as uniformly ideal and only relative stretch shows), averaged to vertices. A separate **Show mesh
-wireframe** toggle draws the whole volume's triangle edges, rebuilt only when the vertex count changes
-(not per stroke).
-
-### Tiling
-
-`DecodedHeightTexture::sample(uv, tile_enabled, tile_method)`. Two tile methods when enabled
-(Repeat, MirroredRepeat). **When `tile_enabled` is false, sampling outside `[0,1)` returns `0`
-directly** rather than clamping the *coordinate* into range, which would smear the border row/column of
-pixels outward to infinity in every direction (streaky lines radiating out from the painted patch).
-
-### Subdivision — two modes
-
-**Uniform (`subdivide_mesh_uniform()`)** — whole-mesh, 1-to-4 split. Recursive edge-midpoint split with
-a shared per-pass midpoint cache (keyed by sorted vertex-index pair) so triangles sharing an edge get
-the *same* new vertex - capped at `max_iterations` (default 6). Whole-mesh so it never leaves a
-T-junction, at the cost of densifying everywhere. Wired as a "Subdivide steps" slider (**0–5**, 0 =
-no subdivision), Apply snaps back to 0. Drops texture-displacement paint (no remap) via the standard
-`save_painting()`/`set_mesh()`/`restore_painting()` dance; the other four channels are remapped.
-
-**Adaptive (`subdivide_mesh_adaptive()`)** — refine **only the painted area**, by **Rivara longest-edge
-bisection**, which is *conformal by construction*. Only **terminal** edges are ever bisected - an edge
-that is the longest edge of *every* triangle sharing it - which splits both those triangles along one
-shared midpoint at once, so a hanging node is never created. The edge to split for a triangle that wants
-refining is found by **longest-edge propagation (LEPP)**: walk to the longest edge of ever-longer-edged
-neighbours until a terminal one is reached, and bisect that. Edge length strictly increases along the
-path (ties broken by mesh-vertex key, which both sides of an edge compute identically), so the walk
-cannot cycle, and Rivara's result is that repeating it refines the original triangle in a bounded number
-of bisections. The transition triangles it pulls in just outside the painted patch are the graded band
-that makes the size change conformal.
-
-The win: a small decal on a big model no longer quadruples the *whole* model's triangle count.
-
-**Run to completion, worst-first, against a triangle budget.** The refinement loop is not a fixed number
-of sweeps: it holds every triangle that is over its criteria in a max-heap keyed by *how many times over*
-it is, pops the worst, walks its LEPP, bisects, and re-scores. Edge adjacency (`nb[e]`, the triangle
-across each edge) is built **once** and maintained incrementally through each bisection, so the cost
-scales with the refined region rather than with the whole model. `max_triangles` is the only bound;
-stopping on it leaves a perfectly valid, still-conformal mesh that spent its budget on the largest
-errors. A fixed sweep count instead spends itself grading the *coarse surroundings* - whose edges are
-the longest, so they win every terminal-edge contest - and never reaches the painted patch.
-
-**It carries the paint forward**, which is what makes it usable (uniform subdivide drops paint). Because
-the refinement is *driven by* the paint, the remap is trivial: `subdivide_mesh_adaptive()` fills an
-`out_source[new_tri] = input_tri` map (children inherit their parent), and the gizmo rebuilds each
-layer's mask on the new mesh - a new triangle is painted iff its source was fully painted in that
-layer. `collect_paint_region()` derives both:
-- the union refine-region: **exactly** the original triangles the brush touched, read straight off
-  `TriangleSplittingData::triangles_to_split` (`serialize()` records an entry per original triangle that
-  is either split - i.e. partially painted, the patch boundary - or carries a non-default state). No
-  dilation: marking every triangle that shares a *vertex* with the patch drags in a whole fan of huge
-  unpainted neighbours and refines *those* down to the resolution floor, since the height field the
-  detail test samples is not restricted to the painted area. The conformal closure already grades the
-  size change outward on its own.
-- the per-layer fully-painted-triangle sets (a `get_facets_strict(ENFORCER)` sub-triangle with all three
-  *original* vertex indices == a whole, fully-painted original triangle; a partial stroke's sub-triangles
-  always carry a split vertex).
-
-The other four channels ride the normal `restore_painting()` remap.
-
-Both modes share the gizmo's Preview/Apply/Done flow; the **"Only painted area (adaptive)"** checkbox
-picks the mode, and the adaptive preview follows the paint live (`rebuild_preview()` refreshes the
-wireframe while the subdivide preview is open in adaptive mode). The panel shows the previewed triangle
-count.
-
-**Feature-adaptive (follow texture detail).** A sub-mode of adaptive (the **"Follow texture detail"**
-checkbox) that puts triangles where the *displaced surface actually bends*, not evenly. A flat region or
-a linear **ramp** needs no extra vertices (linear interpolation is exact for a ramp); what needs them is
-**curvature** - the *second* derivative, not the gradient. So the extra predicate is a **chord-error**
-test: sample the combined displacement at the triangle's three edge midpoints *and its centroid*
-(sampling the interior is what catches a bump sitting inside a triangle, the blind spot of an edge-only
-test) and take the largest departure from the flat triangle's barycentric interpolation. Refine while
-that exceeds `chord_tolerance_mm` ("Detail (mm)"). Zero chord error on a ramp ⇒ untouched; high on a
-bump/ridge/noise ⇒ refined until captured. Same conformal machinery, so still crack-free. The
-per-triangle error is cached and recomputed only for the children of a split.
-
-Four knobs bracket it, and all four matter:
-- **"Max edge (mm)"** (`target_edge_length_mm`) is a **baseline that applies in feature mode too**.
-  Without it the chord test aliases: a big triangle over a fine pattern can sample four points that all
-  land at similar heights, report no error, and stall before refinement ever starts. The baseline
-  guarantees a sampling density fine enough for the curvature test to see the texture at all.
-- **"Detail (mm)"** is the chord tolerance above.
-- **"Min edge (mm)"** is a hard floor under both, and is what guarantees termination across a sharp
-  texture *step*, where the error never falls however fine the mesh gets.
-- **"Added triangles (k)"** is the budget, passed as `max_triangles` (the model's own triangle count plus
-  the slider, so the control still means something on an already-dense model).
-
-The height field is `make_combined_displacement_sampler()` - it mirrors `build_texture_displacement()`'s
-per-layer setup (decode, patch centroid, cylinder axis, blend order, "lowest layer folds additively")
-but evaluated per point. Two deliberate simplifications, both erring toward *more* detail (safe -
-over-refinement is never a crack): every sampleable layer is sampled at every point (no per-point paint
-test), and edge-smoothing falloff is ignored. The first is *why* the refine region must not be dilated -
-outside the paint the sampler still reports full relief. **LSCM layers are skipped** (no per-point UV); a
-purely LSCM stack yields a null sampler and the code falls back to the length baseline alone. Per-vertex
-heights are sampled lazily, so a small patch on a huge model never pays for the rest of it.
-
-### Fast preview (GPU-only, no CPU meshing)
-
-`resources/shaders/{110,140}/texture_displacement_bump.{vs,fs}`, registered as
-`"texture_displacement_bump"`. Shades the *displaced* surface without moving geometry - active-layer
-only, selected from the View row, and the default when the gizmo opens (`m_use_bump_preview = true`).
-Vertex format is `GLModel::Geometry::EVertexLayout::P3N3T2`: `normal.x` carries the per-vertex paint
-weight (0/1), `normal.y` flags the UV island currently being dragged, and `tex_coord` carries a
-precomputed texture UV, so it can use `GLModel` normally instead of a hand-rolled VBO/VAO manager.
-
-The mesh is **flat** (vertices not shared between triangles): every corner of a painted triangle gets
-weight 1, every corner of an unpainted one weight 0. A coarse mesh needs that - one painted face of a raw
-cube has no strictly-interior vertex, so per-vertex weighting would either bleed onto the neighbours or
-vanish outright. Duplicating vertices costs no shading quality here because the shader takes its surface
-normal from screen-space derivatives of position, not from a per-vertex normal.
-
-**Both preview meshes work in the patch's vertex space, not the mesh's.** Those agree only until a
-*brush* stroke splits a triangle: `get_facets_strict()` then appends the split vertices, so the patch
-array is longer. `rebuild_bump_preview_mesh()` and `rebuild_uvcheck_mesh()` therefore index
-`patch.vertices` throughout. The weight buffer is rebuilt at the same cadence as the true-displacement
-preview (stroke-end/slider-release) but from the **live** `TriangleSelector` state, not the flushed model
-facets, so it does not lag by a full model round-trip.
-
-The perturbed normal is the analytic one for a height field `H = ±depth_mm · h(uv)` displaced along
-`N` over any orthonormal surface tangent pair `T`/`B`:
-
-    N' = normalize(N − (dH/da)·T − (dH/db)·B),   a = dot(p,T), b = dot(p,B)
-
-The two slopes have to be genuine **mm-per-mm** derivatives for the preview's apparent depth to match
-the bake's.
-
-**Two projection paths (`use_vertex_uv` uniform):**
-- **Triplanar (`use_vertex_uv = 0`)** - `uv` and the `T`/`B` axes are both derived in-shader from
-  the dominant normal component, mirroring `project_planar()`/`apply_uv_transform()`, and the slope is
-  formed analytically. `T`/`B` are the projection's axis-aligned pair, exact only when the face is
-  axis-aligned; the shader drops the along-normal component to keep the gradient in the surface. Here
-  one `uv` unit is exactly `tiling_scale` mm, so the `1/tiling_scale` gradient factor is right.
-- **Precomputed UV (`use_vertex_uv = 1`, used for LSCM and ViewProjected)** - `uv` comes per-vertex from
-  the CPU (`compute_layer_vertex_uvs()`, so island placement + tiling/rotation/offset are already folded
-  in), and the perturbed normal is built with **Mikkelsen's method** ("Bump Mapping Unparametrized
-  Surfaces on the GPU"): the surface gradient taken directly from the screen-space derivatives of the
-  *sampled height* and position. **This makes no uv→mm scale assumption**, which is essential, because an
-  LSCM map is **conformal, not isometric**: it is globally area-scaled but the *local* mm-per-uv varies
-  across the chart, so a single global `1/tiling_scale` factor gets the apparent depth wrong. `dFdx(h)`
-  captures the true on-screen rate of change however the chart is stretched. This path is also what makes
-  the fast preview follow the UV editor: move an island and its uv - hence its shading - moves with it
-  (the mesh rebuilds on drag-end, `on_island_edited(finished)` → `rebuild_preview()` →
-  `rebuild_bump_preview_mesh()`). The branch is uniform and the paint weight gates by multiply, so the
-  texture derivatives stay well defined. A triangle straddling a seam has a discontinuous uv → the
-  `det≈0` guard skips it (a localised preview-only artifact, never in the bake).
-
-**Parallax (triplanar path).** Perturbing the shading normal alone welds the pattern to the base surface:
-it does not slide as the camera orbits, and does not get deeper as `depth_mm` grows. The triplanar path
-therefore shades at the point the *displaced* surface would show at this pixel, found by **ray marching**
-(parallax occlusion mapping). A point at ray parameter `s`, i.e. `P + V·s` (`P` the base point, `V` the
-unit direction to the eye), sits at height `s·dot(V,n)` above the undisplaced surface. The displaced
-surface lives in a shell between the extreme values of `amp·(h − midlevel)` - taken from both ends of
-`h ∈ [0,1]`, so it holds for an inverted layer and a raised midlevel too, where the surface sits *below*
-the undisplaced one. The march starts at the top of that shell, where the ray is outside the surface by
-construction, and steps inward until the ray height drops below the sampled height. That crossing *is*
-the visible point.
-
-Solving `Q = P + V·(H(Q)/dot(V,n))` by fixed-point iteration instead is geometrically exact but the
-divisor goes to zero edge-on; the sample then lands a large fraction of a tile away and the iteration
-oscillates, which reads as a second, flat copy of the pattern ghosted over the real one. Clamping the
-step to one tile does not help - a tile-sized shift lands on the neighbouring tile, the same pattern
-again. Offset limiting (stepping along the tangential part of `V`) is stable but understates parallax
-enough that the relief still flattens as soon as the camera tilts. Marching has neither problem.
-
-The hit is interpolated between the last two samples, which keeps `PARALLAX_STEPS` (24) affordable, and
-the whole march is skipped when sweeping the shell would move the sample point less than half a texel -
-the head-on case, so the common view pays almost nothing. The 140 variant samples with
-`textureLod(…, 0.0)` inside the loop, since implicit derivatives are undefined in non-uniform control
-flow. Two uniforms exist for this: `midlevel` (parallax needs the real height, not just its derivative)
-and `eye_model_pos` (the camera in the volume's local frame).
-
-Parallax cannot change the model's silhouette or cast shadows; the View row's Normal mode is one click
-away for that. The LSCM path stays plain Mikkelsen bump - it has no closed-form uv, so there is no cheap
-way to re-project a marched position. One further approximation: the GPU sampler's wrap mode stands in
-for `tile_enabled`/`tile_method`, so with tiling *off* the GPU repeats where the CPU returns 0 outside
-`[0,1)`.
-
-### On-canvas "Adjust Texture" gizmo
-
-A per-active-layer toggle ("Adjust placement") that disables painting and shows a flat pan panel (free
-2D drag on both axes) plus two arrows along the patch's own U/V axes (constrained single-axis drag).
-Anchored to the painted patch's centroid/average-normal (`compute_layer_paint_anchor()`). Hit-testing is
-screen-space distance/point-to-segment, not real 3D ray intersection against the handle geometry - simple
-and good enough at this handle size.
-
-### Projection frame overlay (ViewProjected)
-
-`src/slic3r/GUI/TextureProjectorFrame.hpp/.cpp` - a semi-transparent, resizable `wxFrame` the user
-drags **over the 3D view**, like a slide projector's gate. Whatever the model shows through it is what
-the texture is projected onto, and the window's border becomes the hard edge of the displacement.
-Press **Apply projection frame** and the gizmo reads the window's rectangle and commits it.
-
-The window is deliberately **dumb**: it owns no placement state and reports nothing continuously. Its
-position and size *are* the placement, read on demand at Apply - which is also when the expensive
-visible-facet raycast runs. So dragging it is free and nothing recomputes until asked.
-
-Plain 2D (`wxPaintDC`), not a `wxGLCanvas`: a second GL canvas would have to share the app's one real
-`wxGLContext`. It only ever draws a bitmap and a border.
-
-**The projective mapping (`apply_projection_frame()`)**. The frame defines a **screen-space** rectangle,
-but the bake samples from a **local-space** position, so the two have to be reconciled.
-`view_project_right/up` can only express an *affine* projection - exact under an orthographic camera, but
-wrong under perspective, where the near end of a part projects larger than the far end and no pair of
-axes reproduces that. So the layer instead stores a full projective map (`view_project_matrix`, row-major
-3×4, `uv = (row0·p̃/row2·p̃, row1·p̃/row2·p̃)`), built like this:
-
-- `K = projection · view · (instance · volume)`, i.e. local → clip, the same product the renderer uses.
-  Note `Camera::get_projection_matrix()` is typed `Transform3d` (nominally affine) but its perspective
-  form explicitly writes a `(0, 0, −1, 0)` bottom row into the underlying 4×4, so `clip.w = −z_eye` is
-  genuinely carried. The build therefore multiplies **`.matrix()` products** (plain `Matrix4d`), never
-  `Transform3d` products, which would not compose that row correctly.
-- Window coordinates follow `igl::project`'s convention (as `CameraUtils::project` does), with y
-  measured downward. Writing `uv = (win − rect_origin) / rect_size` makes u and v affine in
-  `ndc = clip.xyz / clip.w`; multiplying through by `clip.w` leaves a plain linear combination of `K`'s
-  rows, which is exactly the 3×4 matrix - the perspective divide survives intact.
-- `w > 0` is checked rather than divided blindly. A point behind the projector has `w < 0` and divides
-  to a plausible-looking but **mirrored** uv - the classic way a projected decal reappears on the back
-  of a model. `project_uv_projective()` returns false there and the caller treats it as no height.
-
-The map already includes placement, so `apply_uv_transform()` is **not** applied on top of it - the
-window's own position and size are the placement, and the tiling/rotation/offset sliders would shove
-the result off the frame the user just aligned. A "Clear" button drops back to the affine path where
-those controls mean something again.
-
-Apply also sets `tile_enabled = false`, so `DecodedHeightTexture::sample()` returns 0 outside `[0,1)`
-and the border is a hard edge rather than the first seam of an endless repeat, and repaints the layer
-via `select_visible_faces(&matrix)` - the frame's uv square clips the selection, which both matches the
-paint to the border and keeps the ray queries proportional to the framed area instead of the model.
-
-Owned by the gizmo and **destroyed** (not just hidden) in `on_shutdown()`. Closing it only hides it, so
-reopening keeps it where it was left.
-
-### UV Editor pane
-
-`UVEditorCanvas` (`src/slic3r/GUI/UVEditorCanvas.hpp/.cpp`) - a standalone `wxGLCanvas` rendering the
-flattened LSCM islands (per-island wireframe + outline + fill) over the height texture (background
-quad tiled across the whole unwrap), with mouse pan/zoom. It is wrapped in a **`UVEditorPanel`**
-(same file) that adds a button row (Frame / Snap / Avg scale / Cut / Join / Unjoin) and a status line
-along the bottom naming the current gesture and the shortcuts in play. The *panel* is what is
-registered as a `wxAuiPaneInfo` pane on `Plater`'s `m_aui_mgr`; `Plater::show_uv_editor(bool)`
-shows/hides it (deferred via `CallAfter`, since the gizmo calls it mid-3D-frame), and
-`get_uv_editor_canvas()` returns the inner canvas the gizmo talks to.
-
-Deliberately **shares the app's one real `wxGLContext`** (`wxGetApp().init_glcontext(*this)`, the
-same call `View3D`/`Preview`/`AssembleView` make) rather than creating an independent context like
-`SkipPartCanvas` does elsewhere in this codebase - this is what lets it reuse the already-registered
-`"flat"`/`"flat_texture"` shaders and `GLModel` as-is, instead of needing its own shader
-compilation/VBO management.
-
-**Geometry is uploaded once, in the unwrap's own (raw, mm) coordinates**, one `GLModel` set per island;
-each island is then drawn through its own 2x3 affine (`island_transform_matrix()` composed with the
-layer's tiling/rotation/offset) passed as the `flat` shader's `view_model_matrix`. A drag updates one
-matrix per island and touches no vertex buffer - `on_island_edited(!finished)` calls only
-`set_island_transforms()`, and the full `set_islands()` rebuild happens solely when the unwrap itself
-changes (`unwrap_changed` in `update_uv_editor()`).
-
-**Gestures** (canvas-owned, reported to the gizmo as incremental deltas via `IslandEditFn`): left-drag
-= move, right-drag or **R** = rotate (hold **Shift** to snap to 15° steps - quantised on the
-*cumulative* rotation, not each delta, so it doesn't judder, and accumulated incrementally so it
-survives crossing ±180°), **S** = scale (R/S modal, click/Enter to confirm, Esc to cancel), wheel =
-zoom about the cursor, middle-drag = pan, **Home**/**F** = frame all. Scale writes
-`TextureIsland::scale`; "Avg scale" (`average_island_scales()`) sets every island to the mean, so
-one island scaled by hand can be matched back to its neighbours' texel density. **Snap** (canvas-owned
-`m_snap_enabled`, toggled from the toolbar) sticks a dragged island's nearest boundary vertex onto a
-neighbouring island's at drag-*end* only - a magnet that re-applies mid-drag is very hard to pull out
-of. Toolbar commands the canvas can't service itself (Avg scale, Cut, Join, Unjoin) are forwarded to the
-gizmo via `CommandFn`; view-only ones (Frame, Snap) it handles directly.
-
-## File map
-
-**libslic3r (core, no GUI dependency):**
-- `src/libslic3r/TextureDisplacement.hpp/.cpp` - data model, bake algorithm, projection methods,
-  tiling, subdivision (uniform + adaptive longest-edge bisection), post-process smoothing
-  (`smooth_mesh_vertices()`), and `TextureDisplacementOptions` (the whole-stack settings). See doc
-  comments throughout, they're kept accurate and up to date.
-- `src/libslic3r/MeshBoolean.hpp/.cpp` - `parameterize_lscm()` and `remesh_isotropic()` in the `cgal`
-  sub-namespace, reusing the existing `CGALMesh`/`_EpicMesh`/conversion-helper infrastructure already
-  there for mesh boolean ops. CGAL includes: `Polygon_mesh_processing/border.h`,
-  `Polygon_mesh_processing/connected_components.h`, `Surface_mesh_parameterization/{Error_code,
-  LSCM_parameterizer_3, parameterize}.h`. No new dependency - CGAL 5.6.3 is already vendored and the
-  `Surface_mesh_parameterization` package headers were already present.
-- `src/libslic3r/Model.hpp/.cpp` - the 8 named `FacetsAnnotation` fields + accessor,
-  `texture_displacement_layers`, `texture_displacement_options`, and all the mirrored touch points
-  (see Data model above).
-
-**GUI:**
-- `src/slic3r/GUI/Gizmos/GLGizmoTextureDisplacement.hpp/.cpp` - the gizmo and its whole panel.
-- `src/slic3r/GUI/TextureLibrary.hpp/.cpp` - scans the shipped + user texture folders, imports an
-  arbitrary image into the user folder (converting it to the 8-bit grayscale PNG libslic3r decodes),
-  and loads a library file's bytes for a layer. The image→grayscale-PNG conversion lives here, on the
-  GUI side, because libslic3r has no image toolkit; both the import path and the "pick a shipped
-  texture" path go through the same one function.
-- `resources/textures/displacement/*.png` - the 10 shipped height maps (Bricks, Grid, Hexagons,
-  Knurl, Noise, Quilt, Studs, Waves, Weave, Wood Grain). All 512×512 8-bit grayscale and **seamless**
-  (each is periodic over the full image in both axes, so tiling shows no seam). Generated
-  procedurally; the whole `resources/` tree is installed recursively by CMake, so a new folder under
-  it ships with no build-system change.
-- `src/slic3r/GUI/Jobs/TextureDisplacementBakeJob.hpp/.cpp` - background bake commit.
-- `src/slic3r/GUI/Jobs/TextureDisplacementPreviewJob.hpp/.cpp` - background preview compute
-  (mirrors the bake job's shape but commits nothing to the Model).
-- `src/slic3r/GUI/TextureProjectorFrame.hpp/.cpp` - the semi-transparent projection-frame overlay for
-  ViewProjected layers (plain 2D `wxPaintDC`, no GL context - see its section above).
-- `src/slic3r/GUI/UVEditorCanvas.hpp/.cpp` - the 2D UV unwrap viewer widget.
-- `src/slic3r/GUI/Plater.hpp/.cpp` - `uv_editor_canvas` member, AUI pane registration,
-  `get_uv_editor_canvas()`/`show_uv_editor()`.
-- `src/slic3r/GUI/GLShadersManager.cpp` - registers `"texture_displacement_bump"`.
-- `resources/shaders/{110,140}/texture_displacement_bump.{vs,fs}` - the fast-preview shader.
-- `src/slic3r/GUI/Gizmos/GLGizmoPainterBase.hpp` - `PainterGizmoType::TEXTURE_DISPLACEMENT`.
-- `src/slic3r/GUI/Gizmos/GLGizmosManager.hpp/.cpp` - `EType::TextureDisplacement` registration.
-
-## Tests
-
-`tests/libslic3r/test_texture_displacement.cpp`. Covers `decode_height_texture` round-trip, empty-layer
-no-op, full-cube uniform displacement, a second layer over the same area contributing, all four blend
-modes (table-driven), the lowest layer ignoring its blend mode, border displace/pin, post-process
-smoothing and its mask guarantees, and adaptive subdivision: conformality (`every_edge_used_twice` on a
-partially-refined cube - an exact crack detector for a closed mesh), the target edge length actually
-being reached, the triangle budget capping the result without opening a crack, curvature-driven
-refinement (a Gaussian bump refines at its centre, a linear ramp adds nothing), and the max-edge
-baseline.
-
-`BUILD_TESTS` is `OFF` in the checked-in build cache; flip it on to run them:
-
-    cmake -S . -B build -DBUILD_TESTS=ON
-    cmake --build build --config Release --target libslic3r_tests -- -m
-    ./build/tests/libslic3r/Release/libslic3r_tests.exe "[TextureDisplacement]" --order rand

TEXTURE_DISPLACEMENT_GUIDE.md

@@ -1,326 +0,0 @@
-# Texture Displacement — Feature & Controls Guide
-
-Texture Displacement is a paint-style gizmo that stamps height-map textures onto a model's surface
-and turns them into real relief — engraved or embossed detail — either as a live preview or baked
-into actual mesh geometry. You paint where the texture applies, stack multiple textures as blended
-layers, choose how each is projected onto the surface, and (for the unwrap projection) lay the result
-out by hand in a dedicated 2D **UV Editor** pane.
-
-This document describes every feature and control. For the internal architecture and algorithms, see
-`TEXTURE_DISPLACEMENT.md`.
-
----
-
-## Table of contents
-
-1. [Quick start](#quick-start)
-2. [Entering the tool](#entering-the-tool)
-3. [Selection modes](#selection-modes)
-4. [View modes](#view-modes)
-5. [Auto update](#auto-update)
-6. [Texture layers](#texture-layers)
-7. [Per-layer settings](#per-layer-settings)
-8. [Projection methods](#projection-methods)
-9. [The UV Editor](#the-uv-editor)
-10. [Seams](#seams)
-11. [Adjust placement (on-model)](#adjust-placement-on-model)
-12. [Preparing the mesh: Subdivide & Remesh](#preparing-the-mesh-subdivide--remesh)
-13. [Baking & resetting](#baking--resetting)
-14. [Controls reference](#controls-reference)
-15. [Tips & limitations](#tips--limitations)
-
----
-
-## Quick start
-
-1. Select an object and open the **Texture displacement** gizmo from the left toolbar.
-2. A texture layer is added automatically. Pick a texture from the layer's picker, or import your own.
-3. **Paint** the area you want the texture to affect (or press **Select whole model**).
-4. The relief appears live on the model. Tune **Depth**, **Tile size**, **Rotation**, etc.
-5. If the model is low-poly, use **Subdivide** or **Remesh** so there are enough vertices for detail.
-6. Press **Bake** to convert the preview into real geometry, or leave it as a live preview.
-
-> The tool only ever affects the **painted** area. Everything you don't paint keeps its original
-> surface, and bake blends the relief seamlessly into it.
-
----
-
-## Entering the tool
-
-The gizmo lives on the left gizmo toolbar (icon: `toolbar_texture_displacement.svg`). Its settings
-panel opens beside the toolbar. You can **Dock panel / Undock panel** (top of the panel) to pin it or
-float it freely over the 3D view, and **Close** at the bottom exits the gizmo.
-
-When you first open the tool on a never-textured object it starts with **one texture layer already
-added**, so you can paint straight away.
-
----
-
-## Selection modes
-
-Choose *how* you paint. All three write into the **active layer's** mask.
-
-| Mode | What it does |
-|------|--------------|
-| **Brush** | Free-hand painting with a round brush. Shows a **Brush size** slider and a **Circle / Sphere** choice (circle = surface disc, sphere = 3D ball that also paints around curves). |
-| **Face** | Click a single triangle to paint it. |
-| **Connected area** | Click to flood-fill a region; the **Angle threshold** slider limits how far the fill spreads across changes in surface angle. |
-
-- **Select whole model** — marks the entire model as painted for the active layer, instead of
-  brushing it by hand.
-
----
-
-## View modes
-
-A row of icon buttons labelled **View** controls how the painted area is shown. The first four are a
-radio group; **Wireframe** is an independent toggle. Hover any icon for its tooltip.
-
-| View | Meaning |
-|------|---------|
-| **Normal** | The true displaced geometry — exactly what **Bake** produces. Rebuilt in the background. |
-| **Fast** | A GPU bump-shaded approximation of the *active layer only*. No real geometry movement — quick to update, not exact. Best while tuning or dragging islands. |
-| **Checker** | A test grid painted over the unwrap so you can see stretching (squares stay square where the map isn't distorted). |
-| **Distortion** | A blue→green→red heatmap of how much each area is compressed or stretched in UV space. Needs the **Unwrap (LSCM)** projection. |
-| **Wireframe** | Overlays the mesh edges (white). Independent of the view above; in **Normal** view it sits on the displaced surface. |
-
----
-
-## Auto update
-
-**Auto update** (on by default) rebuilds the true displaced geometry as soon as *anything* changes —
-painting, swapping textures, moving sliders. Turn it off on very heavy models to only rebuild when you
-release a slider (painting still updates on stroke end).
-
----
-
-## Texture layers
-
-You can stack up to **8** texture layers. Each has its own independent paint mask, its own texture,
-and its own parameters, and they combine in slot order like layers in an image editor.
-
-- **Add a layer** — the **＋ icon** to the right of the *Texture layers* heading (reuses the tool icon
-  for now).
-- **Remove** — the button on each layer's header row.
-- **Active layer** — click a layer's header (or anywhere in its block) to make it active. The active
-  layer is the one you paint into and the one whose block is tinted. Only one layer is active at a time.
-- **Erase all** — clears the active layer's paint.
-
-Each layer shows a texture **picker** (large preview + name). Open it to choose from the shipped
-library or import your own image (any png/jpg/bmp; it's converted to an 8-bit grayscale height map and
-copied into your user texture folder so app updates can't overwrite it).
-
----
-
-## Per-layer settings
-
-| Control | Range / options | What it does |
-|---------|-----------------|--------------|
-| **Depth (mm)** | 0.01–10 (log) | Maximum displacement along the surface normal. |
-| **Tile size (mm)** | 0.2–200 (log) | Physical size of one texture tile on the surface. |
-| **Rotation** | 0–360° | Rotates the texture on the surface. |
-| **Midlevel** | 0–10 | The grey level that means "don't move". At 0 the texture only pushes outward; raise it and darker texels cut *inward* (one map both embosses and engraves). 0.5 makes mid-grey neutral. |
-| **Smoothing** | 0–1 | Blurs the height texture before it displaces — rounds hard edges and removes speckle without needing a softer source image. |
-| **Edge smoothing** | checkbox + **Edge amount** 0–1 | Fades the relief to flat toward the *edge of the painted area*, so it blends into the surrounding surface. A small amount softens only a thin band at the very edge; the maximum flattens the whole painted face. |
-| **Invert** | checkbox | Flips the height map (peaks become valleys). |
-| **Blend** | Add / Subtract / Multiply / Divide | How this layer combines with the layers **below** it where they overlap. Add/Subtract pile relief on or carve it away; Multiply/Divide scale the relief underneath (a mask). The lowest painted layer is the **Base** and always behaves additively. |
-| **Tile** | checkbox + **Repeat / Mirrored repeat** | When off, the texture is placed once (a decal) instead of repeating. Mirrored repeat flips every other tile to hide seams. |
-| **Projection** | see below | How the texture is mapped onto the painted surface. |
-
-> **Midlevel warning:** cutting inward can fold the surface through itself in sharp concave corners or
-> thin walls. Keep Depth small relative to the feature you're cutting into; the panel warns when a deep
-> inward setting is risky.
-
----
-
-## Projection methods
-
-How the 2D texture is wrapped onto the 3D painted area.
-
-| Method | Best for | Notes |
-|--------|----------|-------|
-| **Triplanar (blended)** | Patches wrapping around edges | Projects from all three axes at once and blends, so there's no seam across a sharp edge. |
-| **Cylindrical** | Round, tube-like selections | Wraps the texture around the patch's own centre/axis. |
-| **Spherical** | Ball-like selections | Longitude/latitude wrap around the patch centre. |
-| **Unwrap (LSCM)** | Flat, controlled layout | A real conformal unwrap. Cuts the area into pieces at sharp edges (see **Seam angle**), flattens each, and lets you lay them out by hand in the **UV Editor**. Unlocks Checker/Distortion, seams, and island editing. |
-| **From view** | Decals / slide-projector look | Projects straight onto the surface from the current camera direction. Use **Capture current view** to re-lay it from wherever you're looking. |
-
-### LSCM-only controls
-
-These appear when a layer uses **Unwrap (LSCM)**:
-
-- **Seam angle** (5–90°) — edges sharper than this are cut so each piece lies flat. Lower cuts more
-  (less stretching, more seams); raise to keep more in one piece. A box's 90° corners are cut by
-  default. *Ignored once you've marked any seam by hand* (your seams then define the pieces).
-- **Connect islands** (on by default) — lays the unwrap out as a **connected net**: pieces that share
-  an edge are unfolded next to each other (a cube becomes a joined net instead of six loose squares).
-  They stay separate islands, so you can still move any of them by hand. Turn off for the classic
-  packed-grid layout.
-- **Open UV editor** — shows the flattened unwrap in a side pane (see below). Opens *only* when you
-  turn this on — it never pops up on its own.
-- **Mark seams** / **Path** / **Clear seams** — see [Seams](#seams).
-- An **Unwrap: N islands, F faces, V verts** read-out tells you what the unwrap actually produced.
-
----
-
-## The UV Editor
-
-A dockable 2D pane (enable **Open UV editor** on an LSCM layer) showing the flattened unwrap over the
-height texture. Islands are the flattened pieces; you can rearrange them freely — nothing re-packs them
-behind your back. Moving an island updates the model **live** (in Fast view it tracks the cursor
-smoothly, via a shader uniform — no rebuild until you release).
-
-### Navigation
-
-| Action | Control |
-|--------|---------|
-| Pan | Middle-drag |
-| Zoom | Mouse wheel (zooms about the cursor) |
-| Frame everything | **Home** or **F**, or the **Frame** toolbar button |
-
-### Editing an island
-
-| Action | Control |
-|--------|---------|
-| Select | Left-click an island |
-| Move | Left-drag |
-| Rotate | Right-drag, or press **R** then move the mouse (click/Enter to confirm, Esc to cancel) |
-| Rotate snapped | Hold **Shift** while rotating — snaps to **global** 15° marks (0/15/30…). A protractor dial with tick marks and the current angle is shown. |
-| Scale | Press **S** then move the mouse (click/Enter to confirm, Esc to cancel) |
-| Undo / Redo | **Ctrl+Z** / **Ctrl+Shift+Z** or **Ctrl+Y** |
-
-The **selected** island gets a bold light-green outline and a brighter wireframe; unselected islands
-are a translucent light-green wash. The texture underneath repeats exactly as it will when baked.
-A **status line** along the bottom always names the current gesture and the shortcuts in play.
-
-### Toolbar
-
-| Button | Action |
-|--------|--------|
-| **Frame** | Frame all islands (same as Home). |
-| **Snap** | Toggle magnetic snapping — a dragged island sticks its boundary to a neighbour's when they come close. |
-| **Avg scale** | Give every island the same texel density (Blender's "Average Islands Scale"). |
-| **Cut** | Split the selected island across its long axis (useful for very long islands). |
-| **Join** | Unfold the selected island onto its nearest neighbour along their shared edge — keeps both as separate islands with their own borders. |
-| **Unjoin** | Send the selected island back to its own packed position. |
-
-> **Checker / Distortion in the UV editor:** selecting those View modes also colours the UV pane — a
-> checker background, or a per-island distortion heatmap — so you can judge stretch in 2D as well as
-> on the model.
-
----
-
-## Seams
-
-Seams are edges the unwrap is forced to cut along, on top of whatever the Seam angle cuts — the
-Blender "mark seam" workflow. They let you control exactly where the unwrap splits.
-
-Enable **Mark seams** on an active LSCM layer, then:
-
-- **Click an edge** on the model to mark it (it turns **red**); click a red edge again to unmark it.
-  The edge under the cursor is highlighted **yellow** so you can see what a click will toggle.
-- **Path mode** (the **Path** checkbox) — for dense meshes where clicking each edge is tedious: click a
-  start point, then an end point, and the whole **shortest path** between them is seamed at once. It
-  chains (each click extends from the last point); the start vertex is shown in **green**.
-- **Ctrl+drag** rotates/pans the camera while in seam mode.
-- **Clear seams** removes them all.
-
-Once any seam is marked, the automatic Seam-angle cutting is disabled so *your* seams define the
-islands — pieces you leave un-seamed merge together.
-
----
-
-## Adjust placement (on-model)
-
-**Adjust placement** (on an active layer) lets you position the texture by dragging a handle on the
-model instead of nudging the Rotation/offset numbers. The handle is a flat panel in the patch's
-tangent plane (drag anywhere on it to move freely) plus U/V arrows for single-axis nudges. It's
-anchored to the painted patch, so paint something first.
-
----
-
-## Preparing the mesh: Subdivide & Remesh
-
-Displacement can only move vertices that exist, so a coarse model needs more of them first.
-
-### Subdivide
-
-Splits every triangle into four, **1–5 times** (each step roughly quadruples the triangle count).
-
-- **Subdivide steps** (1–5) — how many times to split.
-- **Preview subdivision** — shows the result as a **cyan wireframe** without changing the model.
-- **Apply** — commits the subdivision to the geometry.
-- **Done** — ends the preview and leaves the model as it is.
-
-### Remesh
-
-Rebuilds the whole model with triangles close to a target edge length — evens out a mesh with wildly
-varying triangle sizes (CGAL isotropic remeshing).
-
-- **Target edge (mm)** — desired triangle edge length (seeded to the model's current average).
-- **Remesh** — splits the big triangles and merges the small ones to that size.
-
-> Both Subdivide-Apply and Remesh **replace the geometry** and clear any *not-yet-baked* paint on it
-> (already-baked relief is kept). If you had the mesh **Wireframe** on before, it stays on afterward.
-
----
-
-## Baking & resetting
-
-- **Bake** — converts the current preview into real, permanent mesh geometry, restricted to the
-  painted area. Runs in the background; the button shows *Baking…* while it works.
-- **Erase all** — clears the active layer's paint.
-
-Baking is the exact same algorithm as the **Normal** preview, so what you see is what you get.
-
----
-
-## Controls reference
-
-### Mouse — 3D view (while painting)
-
-| Input | Action |
-|-------|--------|
-| Left-drag | Paint the active layer |
-| Ctrl + drag | Rotate / pan the camera (works in seam mode too) |
-| Wheel | Zoom |
-
-### Mouse & keys — UV Editor
-
-| Input | Action |
-|-------|--------|
-| Left-click | Select island |
-| Left-drag | Move island |
-| Right-drag | Rotate island |
-| **R** / **S** | Modal rotate / scale (mouse drives it, click or Enter confirms, Esc cancels) |
-| **Shift** (while rotating) | Snap to global 15° marks |
-| Middle-drag | Pan |
-| Wheel | Zoom about cursor |
-| **Home** / **F** | Frame all islands |
-| **Ctrl+Z** / **Ctrl+Shift+Z** / **Ctrl+Y** | Undo / redo |
-
-### Seam mode
-
-| Input | Action |
-|-------|--------|
-| Click edge | Mark / unmark a seam (yellow = hover, red = marked) |
-| Click (Path mode) | Set start, then seam the shortest path to the next click |
-| Ctrl + drag | Rotate / pan camera |
-
----
-
-## Tips & limitations
-
-- **Paint first, then bake.** The preview is free to explore; only Bake changes the real mesh.
-- **Not enough detail?** Subdivide or Remesh before painting fine textures.
-- **Inward cuts** (high Midlevel + big Depth) can self-intersect on thin walls or sharp concave
-  corners — keep Depth modest there.
-- **Fast vs Normal:** Fast preview shades a bump and shows only the active layer; use it for quick
-  tuning and smooth UV dragging, but trust **Normal**/**Bake** for the exact result.
-- **Topology changes drop unbaked paint.** Subdivide-Apply, Remesh, and Simplify replace the mesh, and
-  texture-displacement paint isn't remapped across that change (already-baked relief is unaffected).
-- **Island placements** are tied to the current unwrap. Re-painting or changing the Seam angle can
-  re-segment the charts and renumber them, so a re-unwrap re-lays the connected net and discards
-  hand placements made before it.
-- **Connect islands** is on by default; turn it off (per layer) for the classic packed-grid layout, or
-  if an unfold looks wrong on an unusual mesh.

localization/i18n/OrcaSlicer.pot

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 12:39+0800\n"
+"POT-Creation-Date: 2026-09-22 17:02+0800\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -6161,9 +6161,6 @@ msgstr ""
 msgid "Preferences"
 msgstr ""
 
-msgid "Open speed dial"
-msgstr ""
-
 msgctxt "Menu"
 msgid "Edit"
 msgstr ""
@@ -6171,6 +6168,9 @@ msgstr ""
 msgid "View"
 msgstr ""
 
+msgid "Open Speed Dial"
+msgstr ""
+
 msgid "Preset Bundle"
 msgstr ""
 

localization/i18n/ca/OrcaSlicer_ca.po

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 12:39+0800\n"
+"POT-Creation-Date: 2026-09-22 17:02+0800\n"
 "PO-Revision-Date: 2025-03-15 10:55+0100\n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -6637,9 +6637,6 @@ msgstr "Mostrar el contorn al voltant de l'objecte seleccionat a l'escena 3D"
 msgid "Preferences"
 msgstr "Preferències"
 
-msgid "Open speed dial"
-msgstr ""
-
 # AI Translated
 msgctxt "Menu"
 msgid "Edit"
@@ -6648,6 +6645,9 @@ msgstr "Edita"
 msgid "View"
 msgstr "Vista"
 
+msgid "Open Speed Dial"
+msgstr ""
+
 # AI Translated
 msgid "Preset Bundle"
 msgstr "Paquet de perfils"

localization/i18n/cs/OrcaSlicer_cs.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 12:39+0800\n"
+"POT-Creation-Date: 2026-09-22 17:02+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: Jakub Hencl\n"
 "Language-Team: \n"
@@ -6602,9 +6602,6 @@ msgstr "Zobrazit obrys kolem vybraného objektu ve 3D scéně."
 msgid "Preferences"
 msgstr "Předvolby"
 
-msgid "Open speed dial"
-msgstr ""
-
 # AI Translated
 msgctxt "Menu"
 msgid "Edit"
@@ -6613,6 +6610,9 @@ msgstr "Upravit"
 msgid "View"
 msgstr "Zobrazit"
 
+msgid "Open Speed Dial"
+msgstr ""
+
 msgid "Preset Bundle"
 msgstr "Balík předvoleb"
 

localization/i18n/de/OrcaSlicer_de.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 12:39+0800\n"
+"POT-Creation-Date: 2026-09-22 17:02+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: Heiko Liebscher <hliebschergmail.com>\n"
 "Language-Team: \n"
@@ -6490,9 +6490,6 @@ msgstr "Kontur um das ausgewählte Objekt in der 3D-Szene anzeigen."
 msgid "Preferences"
 msgstr "Einstellungen"
 
-msgid "Open speed dial"
-msgstr ""
-
 # AI Translated
 msgctxt "Menu"
 msgid "Edit"
@@ -6501,6 +6498,9 @@ msgstr "Bearbeiten"
 msgid "View"
 msgstr "Ansicht"
 
+msgid "Open Speed Dial"
+msgstr ""
+
 msgid "Preset Bundle"
 msgstr "Vorlagen-Bundle"
 

localization/i18n/en/OrcaSlicer_en.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 12:39+0800\n"
+"POT-Creation-Date: 2026-09-22 17:02+0800\n"
 "PO-Revision-Date: 2026-06-17 15:44-0300\n"
 "Last-Translator: Alexandre Folle de Menezes\n"
 "Language-Team: \n"
@@ -6157,9 +6157,6 @@ msgstr ""
 msgid "Preferences"
 msgstr ""
 
-msgid "Open speed dial"
-msgstr ""
-
 msgctxt "Menu"
 msgid "Edit"
 msgstr ""
@@ -6167,6 +6164,9 @@ msgstr ""
 msgid "View"
 msgstr ""
 
+msgid "Open Speed Dial"
+msgstr ""
+
 msgid "Preset Bundle"
 msgstr ""
 

localization/i18n/es/OrcaSlicer_es.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 12:39+0800\n"
+"POT-Creation-Date: 2026-09-22 17:02+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: Ian A. Bassi <>\n"
 "Language-Team: \n"
@@ -6346,9 +6346,6 @@ msgstr "Mostrar el contorno alrededor del objeto seleccionado en la escena 3D."
 msgid "Preferences"
 msgstr "Preferencias"
 
-msgid "Open speed dial"
-msgstr ""
-
 msgctxt "Menu"
 msgid "Edit"
 msgstr "Edición"
@@ -6356,6 +6353,9 @@ msgstr "Edición"
 msgid "View"
 msgstr "Vista"
 
+msgid "Open Speed Dial"
+msgstr ""
+
 msgid "Preset Bundle"
 msgstr "Paquete de perfiles"
 

localization/i18n/eu/OrcaSlicer_eu.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 12:39+0800\n"
+"POT-Creation-Date: 2026-09-22 17:02+0800\n"
 "PO-Revision-Date: 2026-07-20 13:33+0200\n"
 "Last-Translator: Manu Goiogana <mgoiogana@gmail.com>\n"
 "Language-Team: \n"
@@ -6392,9 +6392,6 @@ msgstr "Erakutsi hautatutako objektuaren inguruko ingerada 3D eszenan."
 msgid "Preferences"
 msgstr "Hobespenak"
 
-msgid "Open speed dial"
-msgstr ""
-
 # AI Translated
 msgctxt "Menu"
 msgid "Edit"
@@ -6403,6 +6400,9 @@ msgstr "Editatu"
 msgid "View"
 msgstr "Bista"
 
+msgid "Open Speed Dial"
+msgstr ""
+
 msgid "Preset Bundle"
 msgstr "Aurrezarpen-paketea"
 

localization/i18n/fr/OrcaSlicer_fr.po

@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 12:39+0800\n"
+"POT-Creation-Date: 2026-09-22 17:02+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: Guislain Cyril, Thomas Lété\n"
@@ -6439,9 +6439,6 @@ msgstr "Afficher le tracé contour de l’objet sélectionné dans la scène 3D.
 msgid "Preferences"
 msgstr "Préférences"
 
-msgid "Open speed dial"
-msgstr ""
-
 # AI Translated
 msgctxt "Menu"
 msgid "Edit"
@@ -6450,6 +6447,9 @@ msgstr "Édition"
 msgid "View"
 msgstr "Affichage"
 
+msgid "Open Speed Dial"
+msgstr ""
+
 msgid "Preset Bundle"
 msgstr "Paquet de préréglages"
 

localization/i18n/hu/OrcaSlicer_hu.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 12:39+0800\n"
+"POT-Creation-Date: 2026-09-22 17:02+0800\n"
 "Language: hu\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -6541,9 +6541,6 @@ msgstr "Körvonal megjelenítése a kijelölt objektum körül a 3D nézetben."
 msgid "Preferences"
 msgstr "Beállítások"
 
-msgid "Open speed dial"
-msgstr ""
-
 # AI Translated
 msgctxt "Menu"
 msgid "Edit"
@@ -6552,6 +6549,9 @@ msgstr "Szerkesztés"
 msgid "View"
 msgstr "Nézet"
 
+msgid "Open Speed Dial"
+msgstr ""
+
 msgid "Preset Bundle"
 msgstr "Beállításcsomag"
 

localization/i18n/it/OrcaSlicer_it.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 12:39+0800\n"
+"POT-Creation-Date: 2026-09-22 17:02+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -6543,9 +6543,6 @@ msgstr "Mostra il contorno attorno all'oggetto selezionato nella scena 3D."
 msgid "Preferences"
 msgstr "Preferenze"
 
-msgid "Open speed dial"
-msgstr ""
-
 # AI Translated
 msgctxt "Menu"
 msgid "Edit"
@@ -6554,6 +6551,9 @@ msgstr "Modifica"
 msgid "View"
 msgstr "Vista"
 
+msgid "Open Speed Dial"
+msgstr ""
+
 msgid "Preset Bundle"
 msgstr "Pacchetto profili"
 

localization/i18n/ja/OrcaSlicer_ja.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 12:39+0800\n"
+"POT-Creation-Date: 2026-09-22 17:02+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -6553,9 +6553,6 @@ msgstr "3Dシーンで選択したオブジェクトの周りにアウトライ
 msgid "Preferences"
 msgstr "設定"
 
-msgid "Open speed dial"
-msgstr ""
-
 # AI Translated
 msgctxt "Menu"
 msgid "Edit"
@@ -6564,6 +6561,9 @@ msgstr "編集"
 msgid "View"
 msgstr "表示"
 
+msgid "Open Speed Dial"
+msgstr ""
+
 # AI Translated
 msgid "Preset Bundle"
 msgstr "プリセットバンドル"

localization/i18n/ko/OrcaSlicer_ko.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 12:39+0800\n"
+"POT-Creation-Date: 2026-09-22 17:02+0800\n"
 "PO-Revision-Date: 2025-06-02 17:12+0900\n"
 "Last-Translator: crwusiz <crwusiz@gmail.com>\n"
 "Language-Team: \n"
@@ -6566,9 +6566,6 @@ msgstr "3D 장면에서 선택한 객체 주변에 윤곽선 표시"
 msgid "Preferences"
 msgstr "기본 설정"
 
-msgid "Open speed dial"
-msgstr ""
-
 # AI Translated
 msgctxt "Menu"
 msgid "Edit"
@@ -6577,6 +6574,9 @@ msgstr "편집"
 msgid "View"
 msgstr "시점"
 
+msgid "Open Speed Dial"
+msgstr ""
+
 # AI Translated
 msgid "Preset Bundle"
 msgstr "사전 설정 번들"

localization/i18n/lt/OrcaSlicer_lt.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 12:39+0800\n"
+"POT-Creation-Date: 2026-09-22 17:02+0800\n"
 "PO-Revision-Date: 2026-07-02 14:13+0300\n"
 "Last-Translator: Gintaras Kučinskas <sharanchius@gmail.com>\n"
 "Language-Team: \n"
@@ -6528,9 +6528,6 @@ msgstr "Rodyti kontūrą aplink pasirinktą objektą 3D scenoje."
 msgid "Preferences"
 msgstr "Parinktys"
 
-msgid "Open speed dial"
-msgstr ""
-
 # AI Translated
 msgctxt "Menu"
 msgid "Edit"
@@ -6539,6 +6536,9 @@ msgstr "Redaguoti"
 msgid "View"
 msgstr "Vaizdas"
 
+msgid "Open Speed Dial"
+msgstr ""
+
 msgid "Preset Bundle"
 msgstr "Profilių rinkinys"
 

localization/i18n/nl/OrcaSlicer_nl.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 12:39+0800\n"
+"POT-Creation-Date: 2026-09-22 17:02+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -7122,9 +7122,6 @@ msgstr "Toon een omtrek rond het geselecteerde object in de 3D-scène."
 msgid "Preferences"
 msgstr "Voorkeuren"
 
-msgid "Open speed dial"
-msgstr ""
-
 # AI Translated
 msgctxt "Menu"
 msgid "Edit"
@@ -7133,6 +7130,9 @@ msgstr "Bewerken"
 msgid "View"
 msgstr "Weergave"
 
+msgid "Open Speed Dial"
+msgstr ""
+
 # AI Translated
 msgid "Preset Bundle"
 msgstr "Voorinstellingenbundel"

localization/i18n/pl/OrcaSlicer_pl.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: OrcaSlicer 2.3.0-rc\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 12:39+0800\n"
+"POT-Creation-Date: 2026-09-22 17:02+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: Krzysztof Morga <<tlumaczeniebs@gmail.com>>\n"
 "Language-Team: \n"
@@ -6689,9 +6689,6 @@ msgstr "Przełącza wyświetlanie konturu wokół zaznaczonego obiektu w scenie
 msgid "Preferences"
 msgstr "Preferencje"
 
-msgid "Open speed dial"
-msgstr ""
-
 # AI Translated
 msgctxt "Menu"
 msgid "Edit"
@@ -6700,6 +6697,9 @@ msgstr "Edycja"
 msgid "View"
 msgstr "Widok"
 
+msgid "Open Speed Dial"
+msgstr ""
+
 # AI Translated
 msgid "Preset Bundle"
 msgstr "Pakiet profili"

localization/i18n/pt_BR/OrcaSlicer_pt_BR.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 12:39+0800\n"
+"POT-Creation-Date: 2026-09-22 17:02+0800\n"
 "PO-Revision-Date: 2026-07-26 11:14-0300\n"
 "Last-Translator: Alexandre Folle de Menezes\n"
 "Language-Team: Portuguese, Brazilian\n"
@@ -6363,9 +6363,6 @@ msgstr "Mostrar contorno ao redor do objeto selecionado na cena 3D."
 msgid "Preferences"
 msgstr "Preferências"
 
-msgid "Open speed dial"
-msgstr ""
-
 msgctxt "Menu"
 msgid "Edit"
 msgstr "Editar"
@@ -6373,6 +6370,9 @@ msgstr "Editar"
 msgid "View"
 msgstr "Visualizar"
 
+msgid "Open Speed Dial"
+msgstr ""
+
 msgid "Preset Bundle"
 msgstr "Pacote de Predefinições"
 

localization/i18n/ru/OrcaSlicer_ru.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: OrcaSlicer V2.5.0\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 12:39+0800\n"
+"POT-Creation-Date: 2026-09-22 17:02+0800\n"
 "PO-Revision-Date: 2026-02-25 13:38+0300\n"
 "Last-Translator: Felix14_v2\n"
 "Language-Team: Felix14_v2 (ДС/ТГ: @felix14_v2, почта: aleks111001@list.ru), Andylg <andylg@yandex.ru>\n"
@@ -6597,9 +6597,6 @@ msgstr "Отображение контура вокруг выбранных м
 msgid "Preferences"
 msgstr "Настройки"
 
-msgid "Open speed dial"
-msgstr ""
-
 msgctxt "Menu"
 msgid "Edit"
 msgstr "Правка"
@@ -6607,6 +6604,9 @@ msgstr "Правка"
 msgid "View"
 msgstr "Вид"
 
+msgid "Open Speed Dial"
+msgstr ""
+
 msgid "Preset Bundle"
 msgstr "Пакет профилей"
 

localization/i18n/sv/OrcaSlicer_sv.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 12:39+0800\n"
+"POT-Creation-Date: 2026-09-22 17:02+0800\n"
 "Language: sv\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -7205,9 +7205,6 @@ msgstr "Visa en kontur runt det markerade objektet i 3D-scenen."
 msgid "Preferences"
 msgstr "Inställningar"
 
-msgid "Open speed dial"
-msgstr ""
-
 # AI Translated
 msgctxt "Menu"
 msgid "Edit"
@@ -7216,6 +7213,9 @@ msgstr "Redigera"
 msgid "View"
 msgstr "Vy"
 
+msgid "Open Speed Dial"
+msgstr ""
+
 # AI Translated
 msgid "Preset Bundle"
 msgstr "Förinställningspaket"

localization/i18n/th/OrcaSlicer_th.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 12:39+0800\n"
+"POT-Creation-Date: 2026-09-22 17:02+0800\n"
 "PO-Revision-Date: 2026-06-19 13:40+0700\n"
 "Last-Translator: Icezaza\n"
 "Language-Team: Thai\n"
@@ -6520,9 +6520,6 @@ msgstr "แสดงเค้าร่างรอบๆ วัตถุที
 msgid "Preferences"
 msgstr "การตั้งค่า"
 
-msgid "Open speed dial"
-msgstr ""
-
 # AI Translated
 msgctxt "Menu"
 msgid "Edit"
@@ -6531,6 +6528,9 @@ msgstr "แก้ไข"
 msgid "View"
 msgstr "มุมมอง"
 
+msgid "Open Speed Dial"
+msgstr ""
+
 msgid "Preset Bundle"
 msgstr "ชุดที่ตั้งไว้ล่วงหน้า"
 

localization/i18n/tr/OrcaSlicer_tr.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 12:39+0800\n"
+"POT-Creation-Date: 2026-09-22 17:02+0800\n"
 "PO-Revision-Date: 2026-08-21 23:18+0300\n"
 "Last-Translator: GlauTech\n"
 "Language-Team: \n"
@@ -6588,9 +6588,6 @@ msgstr "3D sahnede seçilen nesnenin etrafındaki ana hatları göster."
 msgid "Preferences"
 msgstr "Tercihler"
 
-msgid "Open speed dial"
-msgstr ""
-
 # AI Translated
 msgctxt "Menu"
 msgid "Edit"
@@ -6599,6 +6596,9 @@ msgstr "Düzen"
 msgid "View"
 msgstr "Görünüm"
 
+msgid "Open Speed Dial"
+msgstr ""
+
 msgid "Preset Bundle"
 msgstr "Ön ayar paketi"
 

localization/i18n/uk/OrcaSlicer_uk.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: orcaslicerua\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 12:39+0800\n"
+"POT-Creation-Date: 2026-09-22 17:02+0800\n"
 "PO-Revision-Date: 2026-07-17 16:25+0300\n"
 "Last-Translator: Andrij Mizyk <andm1zyk@proton.me>\n"
 "Language-Team: Ukrainian\n"
@@ -6557,9 +6557,6 @@ msgstr "Показувати контур навколо виділеного о
 msgid "Preferences"
 msgstr "Налаштування"
 
-msgid "Open speed dial"
-msgstr ""
-
 # AI Translated
 msgctxt "Menu"
 msgid "Edit"
@@ -6568,6 +6565,9 @@ msgstr "Редагування"
 msgid "View"
 msgstr "Вигляд"
 
+msgid "Open Speed Dial"
+msgstr ""
+
 msgid "Preset Bundle"
 msgstr "Набір пресетів"
 

localization/i18n/vi/OrcaSlicer_vi.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 12:39+0800\n"
+"POT-Creation-Date: 2026-09-22 17:02+0800\n"
 "PO-Revision-Date: 2025-10-02 17:43+0700\n"
 "Last-Translator: \n"
 "Language-Team: hainguyen.ts13@gmail.com\n"
@@ -6907,9 +6907,6 @@ msgstr "Hiện đường viền xung quanh vật thể đã chọn trong cảnh
 msgid "Preferences"
 msgstr "Tùy chọn"
 
-msgid "Open speed dial"
-msgstr ""
-
 # AI Translated
 msgctxt "Menu"
 msgid "Edit"
@@ -6918,6 +6915,9 @@ msgstr "Chỉnh sửa"
 msgid "View"
 msgstr "Xem"
 
+msgid "Open Speed Dial"
+msgstr ""
+
 # AI Translated
 msgid "Preset Bundle"
 msgstr "Gói cài đặt sẵn"

localization/i18n/zh_CN/OrcaSlicer_zh_CN.po

@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Slic3rPE\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 12:39+0800\n"
+"POT-Creation-Date: 2026-09-22 17:02+0800\n"
 "PO-Revision-Date: 2026-06-11 12:37-0300\n"
 "Last-Translator: Handle <mail@bysb.net>\n"
 "Language-Team: \n"
@@ -6375,9 +6375,6 @@ msgstr "在3D场景中显示选中对象的轮廓"
 msgid "Preferences"
 msgstr "偏好设置"
 
-msgid "Open speed dial"
-msgstr ""
-
 # AI Translated
 msgctxt "Menu"
 msgid "Edit"
@@ -6386,6 +6383,9 @@ msgstr "编辑"
 msgid "View"
 msgstr "视图"
 
+msgid "Open Speed Dial"
+msgstr ""
+
 msgid "Preset Bundle"
 msgstr "预设包"
 

localization/i18n/zh_TW/OrcaSlicer_zh_TW.po

@@ -9,7 +9,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 12:39+0800\n"
+"POT-Creation-Date: 2026-09-22 17:02+0800\n"
 "PO-Revision-Date: 2025-11-28 13:48-0600\n"
 "Last-Translator: tntchn <15895303+tntchn@users.noreply.github.com>\n"
 "Language-Team: \n"
@@ -6505,9 +6505,6 @@ msgstr "在 3D 場景中顯示選定物件的輪廓"
 msgid "Preferences"
 msgstr "偏好設定"
 
-msgid "Open speed dial"
-msgstr ""
-
 # AI Translated
 msgctxt "Menu"
 msgid "Edit"
@@ -6516,6 +6513,9 @@ msgstr "編輯"
 msgid "View"
 msgstr "視角"
 
+msgid "Open Speed Dial"
+msgstr ""
+
 msgid "Preset Bundle"
 msgstr "設定檔組"
 

resources/images/texture_displacement_add.svg

@@ -1 +0,0 @@
-<svg xmlns="http://www.w3.org/2000/svg" width="16" height="16" viewBox="0 0 16 16"><circle cx="7.5" cy="7.5" r="7" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/><line x1="7.5" y1="4" x2="7.5" y2="11" style="fill:none;stroke:#009688;stroke-linecap:round;stroke-linejoin:round"/><line x1="4" y1="7.5" x2="11" y2="7.5" style="fill:none;stroke:#009688;stroke-linecap:round;stroke-linejoin:round"/></svg>

resources/images/texture_displacement_add_negative.svg

@@ -1 +0,0 @@
-<svg xmlns="http://www.w3.org/2000/svg" width="16" height="16" viewBox="0 0 16 16"><circle cx="7.5" cy="7.5" r="7" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/><line x1="4" y1="7.5" x2="11" y2="7.5" style="fill:none;stroke:#009688;stroke-linecap:round;stroke-linejoin:round"/></svg>

resources/images/texture_displacement_adjust.svg

@@ -1 +0,0 @@
-<svg xmlns="http://www.w3.org/2000/svg" width="16" height="16" viewBox="0 0 16 16"><rect x="5.5" y="5.5" width="4" height="4" style="fill:none;stroke:#009688;stroke-linecap:round;stroke-linejoin:round"/><path d="M7.5 0.5v4M7.5 10.5v4M0.5 7.5h4M10.5 7.5h4M5.5 2.5l2-2 2 2M5.5 12.5l2 2 2-2M2.5 5.5l-2 2 2 2M12.5 5.5l2 2-2 2" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/></svg>

resources/images/texture_displacement_avg_scale.svg

@@ -1,330 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<svg
-   width="40"
-   height="40"
-   viewBox="0 0 40 40"
-   version="1.1"
-   id="svg17"
-   sodipodi:docname="texture_displacement_group.svg"
-   inkscape:version="1.4.2 (f4327f4, 2025-05-13)"
-   xml:space="preserve"
-   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
-   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
-   xmlns:xlink="http://www.w3.org/1999/xlink"
-   xmlns="http://www.w3.org/2000/svg"
-   xmlns:svg="http://www.w3.org/2000/svg"><defs
-     id="defs17"><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect31"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,0,1,0,1.2263883,0,1 @ F,0,0,1,0,1.2263883,0,1 @ F,0,0,1,0,1.2263883,0,1 @ F,0,0,1,0,1.2263883,0,1 | F,0,1,1,0,0.47508735,0,1 @ F,0,1,1,0,0.47508735,0,1 @ F,0,1,1,0,0.47508735,0,1 @ F,0,1,1,0,0.47508735,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect30"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,1,1,0,1.2615305,0,1 @ F,0,0,1,0,1.2615305,0,1 @ F,0,1,1,0,1.2615305,0,1 @ F,0,1,1,0,1.2615305,0,1 | F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect29"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,1,1,0,1.015625,0,1 @ F,0,0,1,0,0,0,1 @ F,0,1,1,0,1.015625,0,1 @ F,0,0,1,0,1.015625,0,1 | F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect27"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,1,1,0,1.059034,0,1 @ F,0,0,1,0,1.059034,0,1 @ F,0,1,1,0,1.059034,0,1 @ F,0,0,1,0,0,0,1 | F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect25"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,1,1,0,1.059034,0,1 @ F,0,0,1,0,1.059034,0,1 @ F,0,1,1,0,1.059034,0,1 @ F,0,0,1,0,0,0,1 | F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect24"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,1,1,0,1.015625,0,1 @ F,0,0,1,0,0,0,1 @ F,0,1,1,0,1.015625,0,1 @ F,0,0,1,0,1.015625,0,1 | F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect23"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,1,0,1 | F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect21"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,0,1,0,1,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0.459375,0,1 @ F,0,0,1,0,0.499968,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0.5002363,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0.4828125,0,1 @ F,0,0,1,0,0.50584,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect19"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,0,1,0,1,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0.459375,0,1 @ F,0,0,1,0,0.499968,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0.5002363,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0.4828125,0,1 @ F,0,0,1,0,0.50584,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect17"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,0,1,0,1,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0.459375,0,1 @ F,0,0,1,0,0.499968,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0.5002363,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0.4828125,0,1 @ F,0,0,1,0,0.50584,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect15"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,0,1,0,1,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0.5002363,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><linearGradient
-       id="swatch7"
-       inkscape:swatch="solid"><stop
-         style="stop-color:#77eaa3;stop-opacity:1;"
-         offset="0"
-         id="stop7" /></linearGradient><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect3"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,0,1,0,0.49883385,0,1 @ F,0,0,1,0,0.48672135,0,1 @ F,0,0,1,0,0.5261776,0,1 @ F,0,0,1,0,0.50001454,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect2"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect31-9"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,0,1,0,1.2263883,0,1 @ F,0,0,1,0,1.2263883,0,1 @ F,0,0,1,0,1.2263883,0,1 @ F,0,0,1,0,1.2263883,0,1 | F,0,1,1,0,0.47508735,0,1 @ F,0,1,1,0,0.47508735,0,1 @ F,0,1,1,0,0.47508735,0,1 @ F,0,1,1,0,0.47508735,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect31-9-1"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,0,1,0,1.2263883,0,1 @ F,0,0,1,0,1.2263883,0,1 @ F,0,0,1,0,1.2263883,0,1 @ F,0,0,1,0,1.2263883,0,1 | F,0,1,1,0,0.47508735,0,1 @ F,0,1,1,0,0.47508735,0,1 @ F,0,1,1,0,0.47508735,0,1 @ F,0,1,1,0,0.47508735,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /></defs><sodipodi:namedview
-     id="namedview17"
-     pagecolor="#ffffff"
-     bordercolor="#000000"
-     borderopacity="0.25"
-     inkscape:showpageshadow="2"
-     inkscape:pageopacity="0.0"
-     inkscape:pagecheckerboard="0"
-     inkscape:deskcolor="#d1d1d1"
-     inkscape:zoom="32"
-     inkscape:cx="25.28125"
-     inkscape:cy="18.359375"
-     inkscape:window-width="3840"
-     inkscape:window-height="2126"
-     inkscape:window-x="-11"
-     inkscape:window-y="-11"
-     inkscape:window-maximized="1"
-     inkscape:current-layer="svg17" /><path
-     d="m 33.973006,35.500013 h -0.999987 a 0.500013,0.500013 0 0 1 0,-1.000026 h 0.999987 A 0.49999998,0.49999998 0 0 0 34.473,33.999994 v -5.000013 a 0.5000126,0.5000126 0 0 1 1.000025,0 v 5.000013 a 1.5,1.5 0 0 1 -1.500019,1.500019 z"
-     style="fill:#b6b6b6;stroke-width:0.999999"
-     id="path3-6" /><path
-     d="m 35.473026,33.999994 v -0.999987 a 0.500013,0.500013 0 0 0 -1.000026,0 v 0.999987 a 0.49999998,0.49999998 0 0 1 -0.499993,0.499994 h -5.000013 a 0.5000126,0.5000126 0 0 0 0,1.000025 h 5.000013 a 1.5,1.5 0 0 0 1.500019,-1.500019 z"
-     style="fill:#b6b6b6;stroke-width:0.999999"
-     id="path3-6-7" /><path
-     d="m 5.9730079,35.500013 h 0.999987 a 0.500013,0.500013 0 0 0 0,-1.000026 h -0.999987 a 0.49999998,0.49999998 0 0 1 -0.499994,-0.499993 v -5.000013 a 0.5000126,0.5000126 0 0 0 -1.000025,0 v 5.000013 a 1.5,1.5 0 0 0 1.500019,1.500019 z"
-     style="fill:#b6b6b6;stroke-width:0.999999"
-     id="path3-6-3" /><path
-     d="m 4.4729879,33.999994 v -0.999987 a 0.500013,0.500013 0 0 1 1.000026,0 v 0.999987 a 0.49999998,0.49999998 0 0 0 0.499993,0.499994 H 10.97302 a 0.5000126,0.5000126 0 0 1 0,1.000025 H 5.9730069 a 1.5,1.5 0 0 1 -1.500019,-1.500019 z"
-     style="fill:#b6b6b6;stroke-width:0.999999"
-     id="path3-6-7-5" /><path
-     d="m 5.9730079,4.499987 h 0.999987 a 0.50001302,0.50001302 0 0 1 0,1.000026 h -0.999987 a 0.49999998,0.49999998 0 0 0 -0.499994,0.499993 v 5.000013 a 0.5000126,0.5000126 0 0 1 -1.0000251,0 V 6.000006 A 1.5,1.5 0 0 1 5.9730079,4.499987 Z"
-     style="fill:#b6b6b6;stroke-width:0.999999"
-     id="path3-6-3-9" /><path
-     d="m 4.4729878,6.000006 v 0.999987 a 0.50001302,0.50001302 0 0 0 1.0000261,0 V 6.000006 A 0.49999998,0.49999998 0 0 1 5.9730068,5.500012 H 10.97302 a 0.5000126,0.5000126 0 0 0 0,-1.000025 H 5.9730068 a 1.5,1.5 0 0 0 -1.500019,1.500019 z"
-     style="fill:#b6b6b6;stroke-width:0.999999"
-     id="path3-6-7-5-8" /><path
-     d="m 33.973006,4.499986 h -0.999987 a 0.50001302,0.50001302 0 0 0 0,1.000026 h 0.999987 A 0.49999998,0.49999998 0 0 1 34.473,6.000005 v 5.000013 a 0.5000126,0.5000126 0 0 0 1.000025,0 V 6.000005 A 1.5,1.5 0 0 0 33.973006,4.499986 Z"
-     style="fill:#b6b6b6;stroke-width:0.999999"
-     id="path3-6-3-9-8" /><path
-     d="m 35.473026,6.000005 v 0.999987 a 0.50001305,0.50001305 0 0 1 -1.000026,0 V 6.000005 A 0.49999998,0.49999998 0 0 0 33.973007,5.500011 h -5.000013 a 0.5000126,0.5000126 0 0 1 0,-1.000025 h 5.000013 a 1.5,1.5 0 0 1 1.500019,1.500019 z"
-     style="fill:#b6b6b6;stroke-width:0.999999"
-     id="path3-6-7-5-8-2" /><g
-     id="g5"><use
-       x="0"
-       y="0"
-       xlink:href="#path3-6-3-9"
-       id="use4" /><use
-       x="0"
-       y="0"
-       xlink:href="#path3-6-7-5-8"
-       id="use5" /></g><g
-     id="g31"
-     transform="translate(-1.2926181,-1.328125)"><path
-       d="m 11.472656,12.726388 v 6.047224 A 1.2263883,1.2263883 45 0 0 12.699044,20 h 6.074568 A 1.2263883,1.2263883 135 0 0 20,18.773612 V 12.726388 A 1.2263883,1.2263883 45 0 0 18.773612,11.5 h -6.074568 a 1.2263883,1.2263883 135 0 0 -1.226388,1.226388 z m 1.730947,-0.0096 h 5.065451 a 0.47508735,0.47508735 45 0 1 0.475087,0.475087 v 5.303732 a 0.47508735,0.47508735 135 0 1 -0.475087,0.475087 h -5.065451 a 0.47508735,0.47508735 45 0 1 -0.475087,-0.475087 l 0,-5.303732 a 0.47508735,0.47508735 135 0 1 0.475087,-0.475087 z"
-       style="fill:#009688;stroke-width:0.1;paint-order:stroke fill markers"
-       id="path30"
-       inkscape:path-effect="#path-effect31"
-       inkscape:original-d="M 11.472656,11.5 V 20 H 20 v -8.5 z m 1.25586,1.216797 h 6.015625 v 6.253906 h -6.015625 z" /><path
-       d="m 11.472656,12.726388 v 6.047224 A 1.2263883,1.2263883 45 0 0 12.699044,20 h 6.074568 A 1.2263883,1.2263883 135 0 0 20,18.773612 V 12.726388 A 1.2263883,1.2263883 45 0 0 18.773612,11.5 h -6.074568 a 1.2263883,1.2263883 135 0 0 -1.226388,1.226388 z m 1.730947,-0.0096 h 5.065451 a 0.47508735,0.47508735 45 0 1 0.475087,0.475087 v 5.303732 a 0.47508735,0.47508735 135 0 1 -0.475087,0.475087 h -5.065451 a 0.47508735,0.47508735 45 0 1 -0.475087,-0.475087 l 0,-5.303732 a 0.47508735,0.47508735 135 0 1 0.475087,-0.475087 z"
-       style="fill:#009688;stroke-width:0.1;paint-order:stroke fill markers"
-       id="path30-4"
-       inkscape:path-effect="#path-effect31-9"
-       inkscape:original-d="M 11.472656,11.5 V 20 H 20 v -8.5 z m 1.25586,1.216797 h 6.015625 v 6.253906 h -6.015625 z"
-       transform="translate(11.058594)" /><path
-       d="m 11.472656,12.726388 v 6.047224 A 1.2263883,1.2263883 45 0 0 12.699044,20 h 6.074568 A 1.2263883,1.2263883 135 0 0 20,18.773612 V 12.726388 A 1.2263883,1.2263883 45 0 0 18.773612,11.5 h -6.074568 a 1.2263883,1.2263883 135 0 0 -1.226388,1.226388 z m 1.730947,-0.0096 h 5.065451 a 0.47508735,0.47508735 45 0 1 0.475087,0.475087 v 5.303732 a 0.47508735,0.47508735 135 0 1 -0.475087,0.475087 h -5.065451 a 0.47508735,0.47508735 45 0 1 -0.475087,-0.475087 l 0,-5.303732 a 0.47508735,0.47508735 135 0 1 0.475087,-0.475087 z"
-       style="fill:#009688;stroke-width:0.1;paint-order:stroke fill markers"
-       id="path30-4-3"
-       inkscape:path-effect="#path-effect31-9-1"
-       inkscape:original-d="M 11.472656,11.5 V 20 H 20 v -8.5 z m 1.25586,1.216797 h 6.015625 v 6.253906 h -6.015625 z"
-       transform="translate(0,11.15625)" /></g></svg>

resources/images/texture_displacement_brush.svg

@@ -1 +0,0 @@
-<svg xmlns="http://www.w3.org/2000/svg" width="16" height="16" viewBox="0 0 16 16"><polygon points="12.5 0.5 15.5 3.5 10 9 7 6" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/><path d="M6.5 7C4.7 6.8 3.2 8 2.9 9.9c-.2 1.3-.8 2.2-2.4 3 2.8 1.5 6.6 1 7.5-1.6.5-1.5.3-3.1-1.5-4.3Z" style="fill:#009688"/></svg>

resources/images/texture_displacement_checker.svg

@@ -1 +0,0 @@
-<svg xmlns="http://www.w3.org/2000/svg" width="16" height="16" viewBox="0 0 16 16"><rect x="0.5" y="0.5" width="7" height="7" style="fill:#009688"/><rect x="7.5" y="7.5" width="7" height="7" style="fill:#009688"/><rect x="0.5" y="0.5" width="14" height="14" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/><line x1="7.5" y1="0.5" x2="7.5" y2="14.5" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/><line x1="0.5" y1="7.5" x2="14.5" y2="7.5" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/></svg>

resources/images/texture_displacement_connected_area.svg

@@ -1 +0,0 @@
-<svg xmlns="http://www.w3.org/2000/svg" width="16" height="16" viewBox="0 0 16 16"><path d="M7.5 7.5 L14.5 7.5 L11 13.5 Z" style="fill:#009688"/><path d="M7.5 7.5 L11 13.5 L4 13.5 Z" style="fill:#009688"/><path d="M7.5 7.5 L4 13.5 L0.5 7.5 Z" style="fill:#009688"/><polygon points="14.5 7.5 11 13.5 4 13.5 0.5 7.5 4 1.5 11 1.5" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/><line x1="7.5" y1="7.5" x2="14.5" y2="7.5" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/><line x1="7.5" y1="7.5" x2="11" y2="13.5" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/><line x1="7.5" y1="7.5" x2="4" y2="13.5" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/><line x1="7.5" y1="7.5" x2="0.5" y2="7.5" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/><line x1="7.5" y1="7.5" x2="4" y2="1.5" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/><line x1="7.5" y1="7.5" x2="11" y2="1.5" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/></svg>

resources/images/texture_displacement_cross.svg

@@ -1 +0,0 @@
-<svg xmlns="http://www.w3.org/2000/svg" width="16" height="16" viewBox="0 0 16 16"><line x1="2.5" y1="2.5" x2="12.5" y2="12.5" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/><line x1="12.5" y1="2.5" x2="2.5" y2="12.5" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/></svg>

resources/images/texture_displacement_cut.svg

@@ -1,359 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<svg
-   width="40"
-   height="40"
-   viewBox="0 0 40 40"
-   version="1.1"
-   id="svg17"
-   sodipodi:docname="texture_displacement_cut.svg"
-   inkscape:version="1.4.2 (f4327f4, 2025-05-13)"
-   xml:space="preserve"
-   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
-   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
-   xmlns:xlink="http://www.w3.org/1999/xlink"
-   xmlns="http://www.w3.org/2000/svg"
-   xmlns:svg="http://www.w3.org/2000/svg"><defs
-     id="defs17"><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect34"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,0,1,0,0.965625,0,1 @ F,0,0,1,0,0.965625,0,1 @ F,0,0,1,0,0.965625,0,1 @ F,0,0,1,0,0.965625,0,1 | F,0,0,1,0,0.3257813,0,1 @ F,0,1,1,0,0.3257813,0,1 @ F,0,1,1,0,0.3257813,0,1 @ F,0,1,1,0,0.3257813,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect33"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect31"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,0,1,0,1.2263883,0,1 @ F,0,0,1,0,1.2263883,0,1 @ F,0,0,1,0,1.2263883,0,1 @ F,0,0,1,0,1.2263883,0,1 | F,0,1,1,0,0.47508735,0,1 @ F,0,1,1,0,0.47508735,0,1 @ F,0,1,1,0,0.47508735,0,1 @ F,0,1,1,0,0.47508735,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect30"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,1,1,0,1.2615305,0,1 @ F,0,0,1,0,1.2615305,0,1 @ F,0,1,1,0,1.2615305,0,1 @ F,0,1,1,0,1.2615305,0,1 | F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect29"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,1,1,0,1.015625,0,1 @ F,0,0,1,0,0,0,1 @ F,0,1,1,0,1.015625,0,1 @ F,0,0,1,0,1.015625,0,1 | F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect27"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,1,1,0,1.059034,0,1 @ F,0,0,1,0,1.059034,0,1 @ F,0,1,1,0,1.059034,0,1 @ F,0,0,1,0,0,0,1 | F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect25"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,1,1,0,1.059034,0,1 @ F,0,0,1,0,1.059034,0,1 @ F,0,1,1,0,1.059034,0,1 @ F,0,0,1,0,0,0,1 | F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect24"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,1,1,0,1.015625,0,1 @ F,0,0,1,0,0,0,1 @ F,0,1,1,0,1.015625,0,1 @ F,0,0,1,0,1.015625,0,1 | F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect23"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,1,0,1 | F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect21"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,0,1,0,1,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0.459375,0,1 @ F,0,0,1,0,0.499968,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0.5002363,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0.4828125,0,1 @ F,0,0,1,0,0.50584,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect19"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,0,1,0,1,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0.459375,0,1 @ F,0,0,1,0,0.499968,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0.5002363,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0.4828125,0,1 @ F,0,0,1,0,0.50584,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect17"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,0,1,0,1,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0.459375,0,1 @ F,0,0,1,0,0.499968,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0.5002363,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0.4828125,0,1 @ F,0,0,1,0,0.50584,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect15"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,0,1,0,1,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0.5002363,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><linearGradient
-       id="swatch7"
-       inkscape:swatch="solid"><stop
-         style="stop-color:#77eaa3;stop-opacity:1;"
-         offset="0"
-         id="stop7" /></linearGradient><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect3"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,0,1,0,0.49883385,0,1 @ F,0,0,1,0,0.48672135,0,1 @ F,0,0,1,0,0.5261776,0,1 @ F,0,0,1,0,0.50001454,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect2"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect31-9"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,0,1,0,1.2263883,0,1 @ F,0,0,1,0,1.2263883,0,1 @ F,0,0,1,0,1.2263883,0,1 @ F,0,0,1,0,1.2263883,0,1 | F,0,1,1,0,0.47508735,0,1 @ F,0,1,1,0,0.47508735,0,1 @ F,0,1,1,0,0.47508735,0,1 @ F,0,1,1,0,0.47508735,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect31-9-1"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,0,1,0,1.2263883,0,1 @ F,0,0,1,0,1.2263883,0,1 @ F,0,0,1,0,1.2263883,0,1 @ F,0,0,1,0,1.2263883,0,1 | F,0,1,1,0,0.47508735,0,1 @ F,0,1,1,0,0.47508735,0,1 @ F,0,1,1,0,0.47508735,0,1 @ F,0,1,1,0,0.47508735,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /></defs><sodipodi:namedview
-     id="namedview17"
-     pagecolor="#ffffff"
-     bordercolor="#000000"
-     borderopacity="0.25"
-     inkscape:showpageshadow="2"
-     inkscape:pageopacity="0.0"
-     inkscape:pagecheckerboard="0"
-     inkscape:deskcolor="#d1d1d1"
-     inkscape:zoom="32"
-     inkscape:cx="15.375"
-     inkscape:cy="16.140625"
-     inkscape:window-width="3840"
-     inkscape:window-height="2126"
-     inkscape:window-x="-11"
-     inkscape:window-y="-11"
-     inkscape:window-maximized="1"
-     inkscape:current-layer="svg17" /><path
-     d="m 33.973006,35.500013 h -0.999987 a 0.500013,0.500013 0 0 1 0,-1.000026 h 0.999987 A 0.49999998,0.49999998 0 0 0 34.473,33.999994 v -5.000013 a 0.5000126,0.5000126 0 0 1 1.000025,0 v 5.000013 a 1.5,1.5 0 0 1 -1.500019,1.500019 z"
-     style="fill:#b6b6b6;stroke-width:0.999999"
-     id="path3-6" /><path
-     d="m 35.473026,33.999994 v -0.999987 a 0.500013,0.500013 0 0 0 -1.000026,0 v 0.999987 a 0.49999998,0.49999998 0 0 1 -0.499993,0.499994 h -5.000013 a 0.5000126,0.5000126 0 0 0 0,1.000025 h 5.000013 a 1.5,1.5 0 0 0 1.500019,-1.500019 z"
-     style="fill:#b6b6b6;stroke-width:0.999999"
-     id="path3-6-7" /><path
-     d="m 5.9730079,35.500013 h 0.999987 a 0.500013,0.500013 0 0 0 0,-1.000026 h -0.999987 a 0.49999998,0.49999998 0 0 1 -0.499994,-0.499993 v -5.000013 a 0.5000126,0.5000126 0 0 0 -1.000025,0 v 5.000013 a 1.5,1.5 0 0 0 1.500019,1.500019 z"
-     style="fill:#b6b6b6;stroke-width:0.999999"
-     id="path3-6-3" /><path
-     d="m 4.4729879,33.999994 v -0.999987 a 0.500013,0.500013 0 0 1 1.000026,0 v 0.999987 a 0.49999998,0.49999998 0 0 0 0.499993,0.499994 H 10.97302 a 0.5000126,0.5000126 0 0 1 0,1.000025 H 5.9730069 a 1.5,1.5 0 0 1 -1.500019,-1.500019 z"
-     style="fill:#b6b6b6;stroke-width:0.999999"
-     id="path3-6-7-5" /><path
-     d="m 5.9730079,4.499987 h 0.999987 a 0.50001302,0.50001302 0 0 1 0,1.000026 h -0.999987 a 0.49999998,0.49999998 0 0 0 -0.499994,0.499993 v 5.000013 a 0.5000126,0.5000126 0 0 1 -1.0000251,0 V 6.000006 A 1.5,1.5 0 0 1 5.9730079,4.499987 Z"
-     style="fill:#b6b6b6;stroke-width:0.999999"
-     id="path3-6-3-9" /><path
-     d="m 4.4729878,6.000006 v 0.999987 a 0.50001302,0.50001302 0 0 0 1.0000261,0 V 6.000006 A 0.49999998,0.49999998 0 0 1 5.9730068,5.500012 H 10.97302 a 0.5000126,0.5000126 0 0 0 0,-1.000025 H 5.9730068 a 1.5,1.5 0 0 0 -1.500019,1.500019 z"
-     style="fill:#b6b6b6;stroke-width:0.999999"
-     id="path3-6-7-5-8" /><path
-     d="m 33.973006,4.499986 h -0.999987 a 0.50001302,0.50001302 0 0 0 0,1.000026 h 0.999987 A 0.49999998,0.49999998 0 0 1 34.473,6.000005 v 5.000013 a 0.5000126,0.5000126 0 0 0 1.000025,0 V 6.000005 A 1.5,1.5 0 0 0 33.973006,4.499986 Z"
-     style="fill:#b6b6b6;stroke-width:0.999999"
-     id="path3-6-3-9-8" /><path
-     d="m 35.473026,6.000005 v 0.999987 a 0.50001305,0.50001305 0 0 1 -1.000026,0 V 6.000005 A 0.49999998,0.49999998 0 0 0 33.973007,5.500011 h -5.000013 a 0.5000126,0.5000126 0 0 1 0,-1.000025 h 5.000013 a 1.5,1.5 0 0 1 1.500019,1.500019 z"
-     style="fill:#b6b6b6;stroke-width:0.999999"
-     id="path3-6-7-5-8-2" /><g
-     id="g5"><use
-       x="0"
-       y="0"
-       xlink:href="#path3-6-3-9"
-       id="use4" /><use
-       x="0"
-       y="0"
-       xlink:href="#path3-6-7-5-8"
-       id="use5" /></g><path
-     d="m 16.082031,8.7625 v 22.475 a 0.965625,0.965625 45 0 0 0.965625,0.965625 h 5.85 A 0.965625,0.965625 135 0 0 23.863281,31.2375 V 8.7625 A 0.965625,0.965625 45 0 0 22.897656,7.796875 h -5.85 A 0.965625,0.965625 135 0 0 16.082031,8.7625 Z m 1.325781,-0.032031 h 5.184376 a 0.3257813,0.3257813 45 0 1 0.325781,0.3257813 V 30.94375 a 0.3257813,0.3257813 135 0 1 -0.325781,0.325781 H 17.407812 A 0.3257813,0.3257813 45 0 1 17.082031,30.94375 V 9.0562501 a 0.3257813,0.3257813 135 0 1 0.325781,-0.3257813 z"
-     style="fill:#009688;stroke-width:0.1;paint-order:stroke fill markers"
-     id="path33"
-     inkscape:path-effect="#path-effect34"
-     inkscape:original-d="m 16.082031,7.796875 v 24.40625 h 7.78125 V 7.796875 Z m 1,0.9335938 h 5.835938 V 31.269531 h -5.835938 z" /><path
-     style="fill:#009688;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.1;stroke-dasharray:none;stroke-opacity:1;paint-order:stroke fill markers"
-     id="rect32"
-     width="1.0000267"
-     height="22.719467"
-     x="27.527292"
-     y="-12.430544"
-     transform="rotate(47.337307)"
-     inkscape:path-effect="#path-effect33"
-     sodipodi:type="rect"
-     d="m 28.027306,-12.430544 c 0.277007,0 0.500013,0.223006 0.500013,0.500013 V 9.7889099 c 0,0.2770071 -0.223006,0.5000131 -0.500013,0.5000131 -0.277008,0 -0.500014,-0.223006 -0.500014,-0.5000131 V -11.930531 c 0,-0.277007 0.223006,-0.500013 0.500014,-0.500013 z"
-     ry="0.50001335" /></svg>

resources/images/texture_displacement_distortion.svg

@@ -1 +0,0 @@
-<svg xmlns="http://www.w3.org/2000/svg" width="16" height="16" viewBox="0 0 16 16"><rect x="0.5" y="0.5" width="14" height="14" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/><line x1="0.5" y1="7.5" x2="14.5" y2="7.5" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/><line x1="2.5" y1="0.5" x2="2.5" y2="14.5" style="fill:none;stroke:#009688;stroke-linecap:round;stroke-linejoin:round"/><line x1="5" y1="0.5" x2="5" y2="14.5" style="fill:none;stroke:#009688;stroke-linecap:round;stroke-linejoin:round"/><line x1="8.5" y1="0.5" x2="8.5" y2="14.5" style="fill:none;stroke:#009688;stroke-linecap:round;stroke-linejoin:round"/></svg>

resources/images/texture_displacement_drag.svg

@@ -1 +0,0 @@
-<svg xmlns="http://www.w3.org/2000/svg" width="16" height="16" viewBox="0 0 16 16"><circle cx="5.5" cy="3.5" r="1.25" style="fill:#949494"/><circle cx="9.5" cy="3.5" r="1.25" style="fill:#949494"/><circle cx="5.5" cy="7.5" r="1.25" style="fill:#949494"/><circle cx="9.5" cy="7.5" r="1.25" style="fill:#949494"/><circle cx="5.5" cy="11.5" r="1.25" style="fill:#949494"/><circle cx="9.5" cy="11.5" r="1.25" style="fill:#949494"/></svg>

resources/images/texture_displacement_erase_all.svg

@@ -1 +0,0 @@
-<svg xmlns="http://www.w3.org/2000/svg" width="16" height="16" viewBox="0 0 16 16"><polygon points="0.5 3 6 5.5 11.5 3 6 0.5 0.5 3" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/><polyline points="0.5 3 0.5 9.5 6 12 8 11.1" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/><polyline points="11.5 3 11.5 8" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/><line x1="6" y1="5.5" x2="6" y2="12" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/><line x1="10" y1="10" x2="15" y2="15" style="fill:none;stroke:#009688;stroke-linecap:round;stroke-linejoin:round"/><line x1="15" y1="10" x2="10" y2="15" style="fill:none;stroke:#009688;stroke-linecap:round;stroke-linejoin:round"/></svg>

resources/images/texture_displacement_face.svg

@@ -1 +0,0 @@
-<svg xmlns="http://www.w3.org/2000/svg" width="16" height="16" viewBox="0 0 16 16"><polygon points="0.5 13.5 7.5 1.5 14.5 13.5" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/><polygon points="4 7.5 11 7.5 7.5 13.5" style="fill:#009688;stroke:#009688;stroke-linejoin:round"/></svg>

resources/images/texture_displacement_fast_preview.svg

@@ -1 +0,0 @@
-<svg xmlns="http://www.w3.org/2000/svg" width="16" height="16" viewBox="0 0 16 16"><rect x="0.5" y="10.5" width="14" height="4" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/><polygon points="9 0.5 4.5 5.5 7.5 5.5 6 9 10.5 4 7.5 4" style="fill:none;stroke:#009688;stroke-linecap:round;stroke-linejoin:round"/></svg>

resources/images/texture_displacement_frame.svg

@@ -1,242 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<svg
-   width="40"
-   height="40"
-   viewBox="0 0 40 40"
-   version="1.1"
-   id="svg17"
-   sodipodi:docname="texture_displacement_frame.svg"
-   inkscape:version="1.4.2 (f4327f4, 2025-05-13)"
-   xml:space="preserve"
-   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
-   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
-   xmlns:xlink="http://www.w3.org/1999/xlink"
-   xmlns="http://www.w3.org/2000/svg"
-   xmlns:svg="http://www.w3.org/2000/svg"><defs
-     id="defs17"><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect21"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,0,1,0,1,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0.459375,0,1 @ F,0,0,1,0,0.499968,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0.5002363,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0.4828125,0,1 @ F,0,0,1,0,0.50584,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect19"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,0,1,0,1,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0.459375,0,1 @ F,0,0,1,0,0.499968,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0.5002363,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0.4828125,0,1 @ F,0,0,1,0,0.50584,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect17"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,0,1,0,1,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0.459375,0,1 @ F,0,0,1,0,0.499968,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0.5002363,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0.4828125,0,1 @ F,0,0,1,0,0.50584,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect15"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,0,1,0,1,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0.5002363,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><linearGradient
-       id="swatch7"
-       inkscape:swatch="solid"><stop
-         style="stop-color:#77eaa3;stop-opacity:1;"
-         offset="0"
-         id="stop7" /></linearGradient><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect3"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,0,1,0,0.49883385,0,1 @ F,0,0,1,0,0.48672135,0,1 @ F,0,0,1,0,0.5261776,0,1 @ F,0,0,1,0,0.50001454,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect2"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /></defs><sodipodi:namedview
-     id="namedview17"
-     pagecolor="#ffffff"
-     bordercolor="#000000"
-     borderopacity="0.25"
-     inkscape:showpageshadow="2"
-     inkscape:pageopacity="0.0"
-     inkscape:pagecheckerboard="0"
-     inkscape:deskcolor="#d1d1d1"
-     inkscape:zoom="16"
-     inkscape:cx="11.6875"
-     inkscape:cy="6.28125"
-     inkscape:window-width="3840"
-     inkscape:window-height="2126"
-     inkscape:window-x="-11"
-     inkscape:window-y="-11"
-     inkscape:window-maximized="1"
-     inkscape:current-layer="svg17" /><path
-     d="m 33.973006,35.500013 h -0.999987 a 0.500013,0.500013 0 0 1 0,-1.000026 h 0.999987 A 0.49999998,0.49999998 0 0 0 34.473,33.999994 v -5.000013 a 0.5000126,0.5000126 0 0 1 1.000025,0 v 5.000013 a 1.5,1.5 0 0 1 -1.500019,1.500019 z"
-     style="fill:#b6b6b6;stroke-width:0.999999"
-     id="path3-6" /><path
-     d="m 35.473026,33.999994 v -0.999987 a 0.500013,0.500013 0 0 0 -1.000026,0 v 0.999987 a 0.49999998,0.49999998 0 0 1 -0.499993,0.499994 h -5.000013 a 0.5000126,0.5000126 0 0 0 0,1.000025 h 5.000013 a 1.5,1.5 0 0 0 1.500019,-1.500019 z"
-     style="fill:#b6b6b6;stroke-width:0.999999"
-     id="path3-6-7" /><path
-     d="m 5.9730079,35.500013 h 0.999987 a 0.500013,0.500013 0 0 0 0,-1.000026 h -0.999987 a 0.49999998,0.49999998 0 0 1 -0.499994,-0.499993 v -5.000013 a 0.5000126,0.5000126 0 0 0 -1.000025,0 v 5.000013 a 1.5,1.5 0 0 0 1.500019,1.500019 z"
-     style="fill:#b6b6b6;stroke-width:0.999999"
-     id="path3-6-3" /><path
-     d="m 4.4729879,33.999994 v -0.999987 a 0.500013,0.500013 0 0 1 1.000026,0 v 0.999987 a 0.49999998,0.49999998 0 0 0 0.499993,0.499994 H 10.97302 a 0.5000126,0.5000126 0 0 1 0,1.000025 H 5.9730069 a 1.5,1.5 0 0 1 -1.500019,-1.500019 z"
-     style="fill:#b6b6b6;stroke-width:0.999999"
-     id="path3-6-7-5" /><path
-     d="m 5.9730079,4.499987 h 0.999987 a 0.50001302,0.50001302 0 0 1 0,1.000026 h -0.999987 a 0.49999998,0.49999998 0 0 0 -0.499994,0.499993 v 5.000013 a 0.5000126,0.5000126 0 0 1 -1.0000251,0 V 6.000006 A 1.5,1.5 0 0 1 5.9730079,4.499987 Z"
-     style="fill:#b6b6b6;stroke-width:0.999999"
-     id="path3-6-3-9" /><path
-     d="m 4.4729878,6.000006 v 0.999987 a 0.50001302,0.50001302 0 0 0 1.0000261,0 V 6.000006 A 0.49999998,0.49999998 0 0 1 5.9730068,5.500012 H 10.97302 a 0.5000126,0.5000126 0 0 0 0,-1.000025 H 5.9730068 a 1.5,1.5 0 0 0 -1.500019,1.500019 z"
-     style="fill:#b6b6b6;stroke-width:0.999999"
-     id="path3-6-7-5-8" /><path
-     d="m 33.973006,4.499986 h -0.999987 a 0.50001302,0.50001302 0 0 0 0,1.000026 h 0.999987 A 0.49999998,0.49999998 0 0 1 34.473,6.000005 v 5.000013 a 0.5000126,0.5000126 0 0 0 1.000025,0 V 6.000005 A 1.5,1.5 0 0 0 33.973006,4.499986 Z"
-     style="fill:#b6b6b6;stroke-width:0.999999"
-     id="path3-6-3-9-8" /><path
-     d="m 35.473026,6.000005 v 0.999987 a 0.50001305,0.50001305 0 0 1 -1.000026,0 V 6.000005 A 0.49999998,0.49999998 0 0 0 33.973007,5.500011 h -5.000013 a 0.5000126,0.5000126 0 0 1 0,-1.000025 h 5.000013 a 1.5,1.5 0 0 1 1.500019,1.500019 z"
-     style="fill:#b6b6b6;stroke-width:0.999999"
-     id="path3-6-7-5-8-2" /><g
-     id="g5"><use
-       x="0"
-       y="0"
-       xlink:href="#path3-6-3-9"
-       id="use4" /><use
-       x="0"
-       y="0"
-       xlink:href="#path3-6-7-5-8"
-       id="use5" /></g><g
-     id="g5-0"
-     transform="translate(6.4998844,6.0000382)"
-     style="fill:#ff2323;fill-opacity:1"><use
-       x="0"
-       y="0"
-       xlink:href="#path3-6-3-9"
-       id="use4-1"
-       style="fill:#ff2323;fill-opacity:1" /><use
-       x="0"
-       y="0"
-       xlink:href="#path3-6-7-5-8"
-       id="use5-2"
-       style="fill:#4e2ca6;fill-opacity:1;fill-rule:nonzero" /></g><g
-     id="g5-0-8"
-     transform="matrix(-1,0,0,1,33.44613,6.0000382)"
-     style="fill:#ff2323;fill-opacity:1"><use
-       x="0"
-       y="0"
-       xlink:href="#path3-6-3-9"
-       id="use4-1-3"
-       style="fill:#ff2323;fill-opacity:1" /><use
-       x="0"
-       y="0"
-       xlink:href="#path3-6-7-5-8"
-       id="use5-2-5"
-       style="fill:#ff2323;fill-opacity:1" /></g><g
-     id="g5-0-8-2"
-     transform="rotate(180,16.723064,16.999981)"
-     style="fill:#ff2323;fill-opacity:1"><use
-       x="0"
-       y="0"
-       xlink:href="#path3-6-3-9"
-       id="use4-1-3-0"
-       style="fill:#ff2323;fill-opacity:1" /><use
-       x="0"
-       y="0"
-       xlink:href="#path3-6-7-5-8"
-       id="use5-2-5-1"
-       style="fill:#ff2323;fill-opacity:1" /></g><g
-     id="g5-0-8-2-4"
-     transform="matrix(1,0,0,-1,6.4998854,33.999963)"
-     style="fill:#ff2323;fill-opacity:1"><use
-       x="0"
-       y="0"
-       xlink:href="#path3-6-3-9"
-       id="use4-1-3-0-0"
-       style="fill:#ff2323;fill-opacity:1" /><use
-       x="0"
-       y="0"
-       xlink:href="#path3-6-7-5-8"
-       id="use5-2-5-1-6"
-       style="fill:#ff2323;fill-opacity:1" /></g><path
-     id="path13"
-     style="fill:#009688;stroke-width:0.1;paint-order:stroke fill markers"
-     d="m 10.972656,11.5 v 4.101562 1.407813 A 0.490625,0.490625 45 0 0 11.463281,17.5 h 0.0094 a 0.4999428,0.4999428 135 0 0 0.499943,-0.499943 V 15.601562 12.000236 A 0.5002363,0.5002363 135 0 1 12.472892,11.5 h 0.241952 0.503906 4.255468 a 0.4984375,0.4984375 135 0 0 0.498438,-0.498437 v -0.0018 A 0.4997516,0.4997516 45 0 0 17.472904,10.5 H 13.21875 12.714844 11.972656 a 1,1 135 0 0 -1,1 z"
-     inkscape:original-d="m 10.972656,10.5 v 1 4.101562 V 17.5 h 1 V 15.601562 11.5 h 0.742188 0.503906 4.753906 v -1 H 13.21875 12.714844 11.972656 Z"
-     inkscape:path-effect="#path-effect15" /><path
-     id="path16"
-     style="fill:#009688;stroke-width:0.1;paint-order:stroke fill markers"
-     d="m 10.972656,11.5 v 4.101562 1.439063 A 0.459375,0.459375 45 0 0 11.432031,17.5 h 0.04066 a 0.499968,0.499968 135 0 0 0.499968,-0.499968 l 0,-1.39847 V 12.000236 A 0.5002363,0.5002363 135 0 1 12.472892,11.5 h 0.241952 0.503906 4.271094 a 0.4828125,0.4828125 135 0 0 0.482812,-0.482812 V 11.00584 A 0.50584,0.50584 45 0 0 17.466816,10.5 H 13.21875 12.714844 11.972656 a 1,1 135 0 0 -1,1 z"
-     inkscape:original-d="m 10.972656,10.5 v 1 4.101562 V 17.5 h 1 V 15.601562 11.5 h 0.742188 0.503906 4.753906 v -1 H 13.21875 12.714844 11.972656 Z"
-     inkscape:path-effect="#path-effect17"
-     transform="matrix(-1,0,0,1,39.939926,2.52e-5)" /><path
-     id="path17"
-     style="fill:#009688;stroke-width:0.1;paint-order:stroke fill markers"
-     d="m 10.972656,11.5 v 4.101562 1.439063 A 0.459375,0.459375 45 0 0 11.432031,17.5 h 0.04066 a 0.499968,0.499968 135 0 0 0.499968,-0.499968 l 0,-1.39847 V 12.000236 A 0.5002363,0.5002363 135 0 1 12.472892,11.5 h 0.241952 0.503906 4.271094 a 0.4828125,0.4828125 135 0 0 0.482812,-0.482812 V 11.00584 A 0.50584,0.50584 45 0 0 17.466816,10.5 H 13.21875 12.714844 11.972656 a 1,1 135 0 0 -1,1 z"
-     inkscape:original-d="m 10.972656,10.5 v 1 4.101562 V 17.5 h 1 V 15.601562 11.5 h 0.742188 0.503906 4.753906 v -1 H 13.21875 12.714844 11.972656 Z"
-     inkscape:path-effect="#path-effect19"
-     transform="rotate(180,19.972885,20.000096)" /><path
-     id="path19"
-     style="fill:#009688;stroke-width:0.1;paint-order:stroke fill markers"
-     d="m 10.972656,11.5 v 4.101562 1.439063 A 0.459375,0.459375 45 0 0 11.432031,17.5 h 0.04066 a 0.499968,0.499968 135 0 0 0.499968,-0.499968 l 0,-1.39847 V 12.000236 A 0.5002363,0.5002363 135 0 1 12.472892,11.5 h 0.241952 0.503906 4.271094 a 0.4828125,0.4828125 135 0 0 0.482812,-0.482812 V 11.00584 A 0.50584,0.50584 45 0 0 17.466816,10.5 H 13.21875 12.714844 11.972656 a 1,1 135 0 0 -1,1 z"
-     inkscape:original-d="m 10.972656,10.5 v 1 4.101562 V 17.5 h 1 V 15.601562 11.5 h 0.742188 0.503906 4.753906 v -1 H 13.21875 12.714844 11.972656 Z"
-     inkscape:path-effect="#path-effect21"
-     transform="matrix(1,0,0,-1,0.0060898,39.99995)" /></svg>

resources/images/texture_displacement_join.svg

@@ -1,387 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<svg
-   width="40"
-   height="40"
-   viewBox="0 0 40 40"
-   version="1.1"
-   id="svg17"
-   sodipodi:docname="texture_displacement_join.svg"
-   inkscape:version="1.4.2 (f4327f4, 2025-05-13)"
-   xml:space="preserve"
-   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
-   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
-   xmlns:xlink="http://www.w3.org/1999/xlink"
-   xmlns="http://www.w3.org/2000/svg"
-   xmlns:svg="http://www.w3.org/2000/svg"><defs
-     id="defs17"><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect35"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 | F,0,1,1,0,0.24375,0,1 @ F,0,1,1,0,0.24375,0,1 @ F,0,1,1,0,0.24375,0,1 @ F,0,0,1,0,0.24375,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect34"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,0,1,0,0.965625,0,1 @ F,0,0,1,0,0.965625,0,1 @ F,0,0,1,0,0.965625,0,1 @ F,0,0,1,0,0.965625,0,1 | F,0,0,1,0,0.3257813,0,1 @ F,0,1,1,0,0.3257813,0,1 @ F,0,1,1,0,0.3257813,0,1 @ F,0,1,1,0,0.3257813,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect33"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect31"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,0,1,0,1.2263883,0,1 @ F,0,0,1,0,1.2263883,0,1 @ F,0,0,1,0,1.2263883,0,1 @ F,0,0,1,0,1.2263883,0,1 | F,0,1,1,0,0.47508735,0,1 @ F,0,1,1,0,0.47508735,0,1 @ F,0,1,1,0,0.47508735,0,1 @ F,0,1,1,0,0.47508735,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect30"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,1,1,0,1.2615305,0,1 @ F,0,0,1,0,1.2615305,0,1 @ F,0,1,1,0,1.2615305,0,1 @ F,0,1,1,0,1.2615305,0,1 | F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect29"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,1,1,0,1.015625,0,1 @ F,0,0,1,0,0,0,1 @ F,0,1,1,0,1.015625,0,1 @ F,0,0,1,0,1.015625,0,1 | F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect27"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,1,1,0,1.059034,0,1 @ F,0,0,1,0,1.059034,0,1 @ F,0,1,1,0,1.059034,0,1 @ F,0,0,1,0,0,0,1 | F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect25"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,1,1,0,1.059034,0,1 @ F,0,0,1,0,1.059034,0,1 @ F,0,1,1,0,1.059034,0,1 @ F,0,0,1,0,0,0,1 | F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect24"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,1,1,0,1.015625,0,1 @ F,0,0,1,0,0,0,1 @ F,0,1,1,0,1.015625,0,1 @ F,0,0,1,0,1.015625,0,1 | F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect23"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,1,0,1 | F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect21"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,0,1,0,1,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0.459375,0,1 @ F,0,0,1,0,0.499968,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0.5002363,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0.4828125,0,1 @ F,0,0,1,0,0.50584,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect19"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,0,1,0,1,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0.459375,0,1 @ F,0,0,1,0,0.499968,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0.5002363,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0.4828125,0,1 @ F,0,0,1,0,0.50584,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect17"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,0,1,0,1,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0.459375,0,1 @ F,0,0,1,0,0.499968,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0.5002363,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0.4828125,0,1 @ F,0,0,1,0,0.50584,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect15"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,0,1,0,1,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0.5002363,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><linearGradient
-       id="swatch7"
-       inkscape:swatch="solid"><stop
-         style="stop-color:#77eaa3;stop-opacity:1;"
-         offset="0"
-         id="stop7" /></linearGradient><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect3"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,0,1,0,0.49883385,0,1 @ F,0,0,1,0,0.48672135,0,1 @ F,0,0,1,0,0.5261776,0,1 @ F,0,0,1,0,0.50001454,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect2"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect31-9"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,0,1,0,1.2263883,0,1 @ F,0,0,1,0,1.2263883,0,1 @ F,0,0,1,0,1.2263883,0,1 @ F,0,0,1,0,1.2263883,0,1 | F,0,1,1,0,0.47508735,0,1 @ F,0,1,1,0,0.47508735,0,1 @ F,0,1,1,0,0.47508735,0,1 @ F,0,1,1,0,0.47508735,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect31-9-1"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,0,1,0,1.2263883,0,1 @ F,0,0,1,0,1.2263883,0,1 @ F,0,0,1,0,1.2263883,0,1 @ F,0,0,1,0,1.2263883,0,1 | F,0,1,1,0,0.47508735,0,1 @ F,0,1,1,0,0.47508735,0,1 @ F,0,1,1,0,0.47508735,0,1 @ F,0,1,1,0,0.47508735,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect35-7"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 | F,0,1,1,0,0.24375,0,1 @ F,0,1,1,0,0.24375,0,1 @ F,0,1,1,0,0.24375,0,1 @ F,0,0,1,0,0.24375,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /></defs><sodipodi:namedview
-     id="namedview17"
-     pagecolor="#ffffff"
-     bordercolor="#000000"
-     borderopacity="0.25"
-     inkscape:showpageshadow="2"
-     inkscape:pageopacity="0.0"
-     inkscape:pagecheckerboard="0"
-     inkscape:deskcolor="#d1d1d1"
-     inkscape:zoom="32"
-     inkscape:cx="18.3125"
-     inkscape:cy="22.328125"
-     inkscape:window-width="3840"
-     inkscape:window-height="2126"
-     inkscape:window-x="-11"
-     inkscape:window-y="-11"
-     inkscape:window-maximized="1"
-     inkscape:current-layer="svg17" /><path
-     d="m 33.973006,35.500013 h -0.999987 a 0.500013,0.500013 0 0 1 0,-1.000026 h 0.999987 A 0.49999998,0.49999998 0 0 0 34.473,33.999994 v -5.000013 a 0.5000126,0.5000126 0 0 1 1.000025,0 v 5.000013 a 1.5,1.5 0 0 1 -1.500019,1.500019 z"
-     style="fill:#b6b6b6;stroke-width:0.999999"
-     id="path3-6" /><path
-     d="m 35.473026,33.999994 v -0.999987 a 0.500013,0.500013 0 0 0 -1.000026,0 v 0.999987 a 0.49999998,0.49999998 0 0 1 -0.499993,0.499994 h -5.000013 a 0.5000126,0.5000126 0 0 0 0,1.000025 h 5.000013 a 1.5,1.5 0 0 0 1.500019,-1.500019 z"
-     style="fill:#b6b6b6;stroke-width:0.999999"
-     id="path3-6-7" /><path
-     d="m 5.9730079,35.500013 h 0.999987 a 0.500013,0.500013 0 0 0 0,-1.000026 h -0.999987 a 0.49999998,0.49999998 0 0 1 -0.499994,-0.499993 v -5.000013 a 0.5000126,0.5000126 0 0 0 -1.000025,0 v 5.000013 a 1.5,1.5 0 0 0 1.500019,1.500019 z"
-     style="fill:#b6b6b6;stroke-width:0.999999"
-     id="path3-6-3" /><path
-     d="m 4.4729879,33.999994 v -0.999987 a 0.500013,0.500013 0 0 1 1.000026,0 v 0.999987 a 0.49999998,0.49999998 0 0 0 0.499993,0.499994 H 10.97302 a 0.5000126,0.5000126 0 0 1 0,1.000025 H 5.9730069 a 1.5,1.5 0 0 1 -1.500019,-1.500019 z"
-     style="fill:#b6b6b6;stroke-width:0.999999"
-     id="path3-6-7-5" /><path
-     d="m 5.9730079,4.499987 h 0.999987 a 0.50001302,0.50001302 0 0 1 0,1.000026 h -0.999987 a 0.49999998,0.49999998 0 0 0 -0.499994,0.499993 v 5.000013 a 0.5000126,0.5000126 0 0 1 -1.0000251,0 V 6.000006 A 1.5,1.5 0 0 1 5.9730079,4.499987 Z"
-     style="fill:#b6b6b6;stroke-width:0.999999"
-     id="path3-6-3-9" /><path
-     d="m 4.4729878,6.000006 v 0.999987 a 0.50001302,0.50001302 0 0 0 1.0000261,0 V 6.000006 A 0.49999998,0.49999998 0 0 1 5.9730068,5.500012 H 10.97302 a 0.5000126,0.5000126 0 0 0 0,-1.000025 H 5.9730068 a 1.5,1.5 0 0 0 -1.500019,1.500019 z"
-     style="fill:#b6b6b6;stroke-width:0.999999"
-     id="path3-6-7-5-8" /><path
-     d="m 33.973006,4.499986 h -0.999987 a 0.50001302,0.50001302 0 0 0 0,1.000026 h 0.999987 A 0.49999998,0.49999998 0 0 1 34.473,6.000005 v 5.000013 a 0.5000126,0.5000126 0 0 0 1.000025,0 V 6.000005 A 1.5,1.5 0 0 0 33.973006,4.499986 Z"
-     style="fill:#b6b6b6;stroke-width:0.999999"
-     id="path3-6-3-9-8" /><path
-     d="m 35.473026,6.000005 v 0.999987 a 0.50001305,0.50001305 0 0 1 -1.000026,0 V 6.000005 A 0.49999998,0.49999998 0 0 0 33.973007,5.500011 h -5.000013 a 0.5000126,0.5000126 0 0 1 0,-1.000025 h 5.000013 a 1.5,1.5 0 0 1 1.500019,1.500019 z"
-     style="fill:#b6b6b6;stroke-width:0.999999"
-     id="path3-6-7-5-8-2" /><g
-     id="g5"><use
-       x="0"
-       y="0"
-       xlink:href="#path3-6-3-9"
-       id="use4" /><use
-       x="0"
-       y="0"
-       xlink:href="#path3-6-7-5-8"
-       id="use5" /></g><path
-     id="rect35"
-     style="fill:#009688;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.1;stroke-dasharray:none;stroke-opacity:1;paint-order:stroke fill markers"
-     d="m 11.154297,12.015625 c -0.277007,0 -0.5,0.222993 -0.5,0.5 v 9.050781 c 0,0.0019 -2.2e-5,0.0039 0,0.0059 -2.3e-5,0.002 0,0.0039 0,0.0059 3.45e-4,0.01513 0.0023,0.03016 0.0039,0.04492 0.02282,0.255546 0.234414,0.455078 0.496094,0.455078 h 9.050781 c 0.277007,0 0.5,-0.222993 0.5,-0.5 v -0.002 -9.048828 c 9e-5,-0.0039 0,-0.0078 0,-0.01172 0,-0.277007 -0.222993,-0.5 -0.5,-0.5 z m 0.74375,1 h 7.563281 a 0.24375,0.24375 45 0 1 0.24375,0.24375 v 7.575 a 0.24375,0.24375 135 0 1 -0.24375,0.24375 h -7.563281 a 0.24375,0.24375 45 0 1 -0.24375,-0.24375 v -7.575 a 0.24375,0.24375 135 0 1 0.24375,-0.24375 z"
-     inkscape:path-effect="#path-effect35"
-     inkscape:original-d="m 11.154297,12.015625 c -0.277007,0 -0.5,0.222993 -0.5,0.5 v 9.050781 c 0,0.0019 -2.2e-5,0.0039 0,0.0059 -2.3e-5,0.002 0,0.0039 0,0.0059 3.45e-4,0.01513 0.0023,0.03016 0.0039,0.04492 0.02282,0.255546 0.234414,0.455078 0.496094,0.455078 h 9.050781 c 0.277007,0 0.5,-0.222993 0.5,-0.5 v -0.002 -9.048828 c 9e-5,-0.0039 0,-0.0078 0,-0.01172 0,-0.277007 -0.222993,-0.5 -0.5,-0.5 z m 0.5,1 h 8.050781 v 8.0625 h -8.050781 z"
-     transform="translate(0.294922,2.953125)" /><path
-     id="rect35-3"
-     style="fill:#009688;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.1;stroke-dasharray:none;stroke-opacity:1;paint-order:stroke fill markers"
-     d="m 11.154297,12.015625 c -0.277007,0 -0.5,0.222993 -0.5,0.5 v 9.050781 c 0,0.0019 -2.2e-5,0.0039 0,0.0059 -2.3e-5,0.002 0,0.0039 0,0.0059 3.45e-4,0.01513 0.0023,0.03016 0.0039,0.04492 0.02282,0.255546 0.234414,0.455078 0.496094,0.455078 h 9.050781 c 0.277007,0 0.5,-0.222993 0.5,-0.5 v -0.002 -9.048828 c 9e-5,-0.0039 0,-0.0078 0,-0.01172 0,-0.277007 -0.222993,-0.5 -0.5,-0.5 z m 0.74375,1 h 7.563281 a 0.24375,0.24375 45 0 1 0.24375,0.24375 v 7.575 a 0.24375,0.24375 135 0 1 -0.24375,0.24375 h -7.563281 a 0.24375,0.24375 45 0 1 -0.24375,-0.24375 v -7.575 a 0.24375,0.24375 135 0 1 0.24375,-0.24375 z"
-     inkscape:path-effect="#path-effect35-7"
-     inkscape:original-d="m 11.154297,12.015625 c -0.277007,0 -0.5,0.222993 -0.5,0.5 v 9.050781 c 0,0.0019 -2.2e-5,0.0039 0,0.0059 -2.3e-5,0.002 0,0.0039 0,0.0059 3.45e-4,0.01513 0.0023,0.03016 0.0039,0.04492 0.02282,0.255546 0.234414,0.455078 0.496094,0.455078 h 9.050781 c 0.277007,0 0.5,-0.222993 0.5,-0.5 v -0.002 -9.048828 c 9e-5,-0.0039 0,-0.0078 0,-0.01172 0,-0.277007 -0.222993,-0.5 -0.5,-0.5 z m 0.5,1 h 8.050781 v 8.0625 h -8.050781 z"
-     transform="translate(9.345703,2.953125)" /></svg>

resources/images/texture_displacement_map_unwrap.svg

@@ -1 +0,0 @@
-<svg xmlns="http://www.w3.org/2000/svg" width="16" height="16" viewBox="0 0 16 16"><rect x="5.5" y="5.5" width="4" height="4" style="fill:#009688"/><rect x="5.5" y="1.5" width="4" height="4" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/><rect x="1.5" y="5.5" width="4" height="4" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/><rect x="5.5" y="5.5" width="4" height="4" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/><rect x="9.5" y="5.5" width="4" height="4" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/><rect x="5.5" y="9.5" width="4" height="4" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/></svg>

resources/images/texture_displacement_map_view.svg

@@ -1 +0,0 @@
-<svg xmlns="http://www.w3.org/2000/svg" width="16" height="16" viewBox="0 0 16 16"><circle cx="2.5" cy="7.5" r="2" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/><line x1="4.3" y1="6.5" x2="11.5" y2="1.5" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/><line x1="4.3" y1="8.5" x2="11.5" y2="13.5" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/><rect x="11.5" y="1.5" width="3" height="12" style="fill:none;stroke:#009688;stroke-linecap:round;stroke-linejoin:round"/></svg>

resources/images/texture_displacement_move_down.svg

@@ -1 +0,0 @@
-<svg xmlns="http://www.w3.org/2000/svg" width="16" height="16" viewBox="0 0 16 16"><line x1="7.5" y1="1.5" x2="7.5" y2="12" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/><polyline points="3.5 8.5 7.5 12.5 11.5 8.5" style="fill:none;stroke:#009688;stroke-linecap:round;stroke-linejoin:round"/></svg>

resources/images/texture_displacement_move_up.svg

@@ -1 +0,0 @@
-<svg xmlns="http://www.w3.org/2000/svg" width="16" height="16" viewBox="0 0 16 16"><line x1="7.5" y1="3" x2="7.5" y2="13.5" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/><polyline points="3.5 6.5 7.5 2.5 11.5 6.5" style="fill:none;stroke:#009688;stroke-linecap:round;stroke-linejoin:round"/></svg>

resources/images/texture_displacement_real_preview.svg

@@ -1 +0,0 @@
-<svg xmlns="http://www.w3.org/2000/svg" width="16" height="16" viewBox="0 0 16 16"><polyline points="0.5 7.5 0.5 14.5 14.5 14.5 14.5 7.5" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/><path d="M0.5 7.5c1.2-3 2.3-3 3.5 0s2.3 3 3.5 0 2.3-3 3.5 0 2.3 3 3.5 0" style="fill:none;stroke:#009688;stroke-linecap:round;stroke-linejoin:round"/></svg>

resources/images/texture_displacement_select_all.svg

@@ -1 +0,0 @@
-<svg xmlns="http://www.w3.org/2000/svg" width="16" height="16" viewBox="0 0 16 16"><polygon points="0.5 3.5 7.5 6.5 7.5 14.5 0.5 11.5 0.5 3.5" style="fill:#009688;fill-opacity:0.55"/><polygon points="7.5 6.5 14.5 3.5 14.5 11.5 7.5 14.5 7.5 6.5" style="fill:#009688;fill-opacity:0.3"/><polygon points="0.5 3.5 7.5 6.5 14.5 3.5 7.5 0.5 0.5 3.5" style="fill:#009688"/><polygon points="0.5 3.5 7.5 6.5 14.5 3.5 7.5 0.5 0.5 3.5" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/><polyline points="0.5 3.5 0.5 11.5 7.5 14.5 14.5 11.5 14.5 3.5" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/><line x1="7.5" y1="6.5" x2="7.5" y2="14.5" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/></svg>

resources/images/texture_displacement_snap.svg

@@ -1,260 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<svg
-   width="40"
-   height="40"
-   viewBox="0 0 40 40"
-   version="1.1"
-   id="svg17"
-   sodipodi:docname="texture_displacement_snap.svg"
-   inkscape:version="1.4.2 (f4327f4, 2025-05-13)"
-   xml:space="preserve"
-   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
-   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
-   xmlns:xlink="http://www.w3.org/1999/xlink"
-   xmlns="http://www.w3.org/2000/svg"
-   xmlns:svg="http://www.w3.org/2000/svg"><defs
-     id="defs17"><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect29"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,1,1,0,1.015625,0,1 @ F,0,0,1,0,0,0,1 @ F,0,1,1,0,1.015625,0,1 @ F,0,0,1,0,1.015625,0,1 | F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect27"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,1,1,0,1.059034,0,1 @ F,0,0,1,0,1.059034,0,1 @ F,0,1,1,0,1.059034,0,1 @ F,0,0,1,0,0,0,1 | F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect25"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,1,1,0,1.059034,0,1 @ F,0,0,1,0,1.059034,0,1 @ F,0,1,1,0,1.059034,0,1 @ F,0,0,1,0,0,0,1 | F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect24"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,1,1,0,1.015625,0,1 @ F,0,0,1,0,0,0,1 @ F,0,1,1,0,1.015625,0,1 @ F,0,0,1,0,1.015625,0,1 | F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect23"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,1,0,1 | F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect21"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,0,1,0,1,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0.459375,0,1 @ F,0,0,1,0,0.499968,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0.5002363,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0.4828125,0,1 @ F,0,0,1,0,0.50584,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect19"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,0,1,0,1,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0.459375,0,1 @ F,0,0,1,0,0.499968,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0.5002363,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0.4828125,0,1 @ F,0,0,1,0,0.50584,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect17"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,0,1,0,1,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0.459375,0,1 @ F,0,0,1,0,0.499968,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0.5002363,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0.4828125,0,1 @ F,0,0,1,0,0.50584,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect15"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,0,1,0,1,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0.5002363,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><linearGradient
-       id="swatch7"
-       inkscape:swatch="solid"><stop
-         style="stop-color:#77eaa3;stop-opacity:1;"
-         offset="0"
-         id="stop7" /></linearGradient><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect3"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,0,1,0,0.49883385,0,1 @ F,0,0,1,0,0.48672135,0,1 @ F,0,0,1,0,0.5261776,0,1 @ F,0,0,1,0,0.50001454,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect2"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /></defs><sodipodi:namedview
-     id="namedview17"
-     pagecolor="#ffffff"
-     bordercolor="#000000"
-     borderopacity="0.25"
-     inkscape:showpageshadow="2"
-     inkscape:pageopacity="0.0"
-     inkscape:pagecheckerboard="0"
-     inkscape:deskcolor="#d1d1d1"
-     inkscape:zoom="45.254834"
-     inkscape:cx="14.363106"
-     inkscape:cy="12.827359"
-     inkscape:window-width="3840"
-     inkscape:window-height="2126"
-     inkscape:window-x="-11"
-     inkscape:window-y="-11"
-     inkscape:window-maximized="1"
-     inkscape:current-layer="svg17" /><path
-     d="m 33.973006,35.500013 h -0.999987 a 0.500013,0.500013 0 0 1 0,-1.000026 h 0.999987 A 0.49999998,0.49999998 0 0 0 34.473,33.999994 v -5.000013 a 0.5000126,0.5000126 0 0 1 1.000025,0 v 5.000013 a 1.5,1.5 0 0 1 -1.500019,1.500019 z"
-     style="fill:#b6b6b6;stroke-width:0.999999"
-     id="path3-6" /><path
-     d="m 35.473026,33.999994 v -0.999987 a 0.500013,0.500013 0 0 0 -1.000026,0 v 0.999987 a 0.49999998,0.49999998 0 0 1 -0.499993,0.499994 h -5.000013 a 0.5000126,0.5000126 0 0 0 0,1.000025 h 5.000013 a 1.5,1.5 0 0 0 1.500019,-1.500019 z"
-     style="fill:#b6b6b6;stroke-width:0.999999"
-     id="path3-6-7" /><path
-     d="m 5.9730079,35.500013 h 0.999987 a 0.500013,0.500013 0 0 0 0,-1.000026 h -0.999987 a 0.49999998,0.49999998 0 0 1 -0.499994,-0.499993 v -5.000013 a 0.5000126,0.5000126 0 0 0 -1.000025,0 v 5.000013 a 1.5,1.5 0 0 0 1.500019,1.500019 z"
-     style="fill:#b6b6b6;stroke-width:0.999999"
-     id="path3-6-3" /><path
-     d="m 4.4729879,33.999994 v -0.999987 a 0.500013,0.500013 0 0 1 1.000026,0 v 0.999987 a 0.49999998,0.49999998 0 0 0 0.499993,0.499994 H 10.97302 a 0.5000126,0.5000126 0 0 1 0,1.000025 H 5.9730069 a 1.5,1.5 0 0 1 -1.500019,-1.500019 z"
-     style="fill:#b6b6b6;stroke-width:0.999999"
-     id="path3-6-7-5" /><path
-     d="m 5.9730079,4.499987 h 0.999987 a 0.50001302,0.50001302 0 0 1 0,1.000026 h -0.999987 a 0.49999998,0.49999998 0 0 0 -0.499994,0.499993 v 5.000013 a 0.5000126,0.5000126 0 0 1 -1.0000251,0 V 6.000006 A 1.5,1.5 0 0 1 5.9730079,4.499987 Z"
-     style="fill:#b6b6b6;stroke-width:0.999999"
-     id="path3-6-3-9" /><path
-     d="m 4.4729878,6.000006 v 0.999987 a 0.50001302,0.50001302 0 0 0 1.0000261,0 V 6.000006 A 0.49999998,0.49999998 0 0 1 5.9730068,5.500012 H 10.97302 a 0.5000126,0.5000126 0 0 0 0,-1.000025 H 5.9730068 a 1.5,1.5 0 0 0 -1.500019,1.500019 z"
-     style="fill:#b6b6b6;stroke-width:0.999999"
-     id="path3-6-7-5-8" /><path
-     d="m 33.973006,4.499986 h -0.999987 a 0.50001302,0.50001302 0 0 0 0,1.000026 h 0.999987 A 0.49999998,0.49999998 0 0 1 34.473,6.000005 v 5.000013 a 0.5000126,0.5000126 0 0 0 1.000025,0 V 6.000005 A 1.5,1.5 0 0 0 33.973006,4.499986 Z"
-     style="fill:#b6b6b6;stroke-width:0.999999"
-     id="path3-6-3-9-8" /><path
-     d="m 35.473026,6.000005 v 0.999987 a 0.50001305,0.50001305 0 0 1 -1.000026,0 V 6.000005 A 0.49999998,0.49999998 0 0 0 33.973007,5.500011 h -5.000013 a 0.5000126,0.5000126 0 0 1 0,-1.000025 h 5.000013 a 1.5,1.5 0 0 1 1.500019,1.500019 z"
-     style="fill:#b6b6b6;stroke-width:0.999999"
-     id="path3-6-7-5-8-2" /><g
-     id="g5"><use
-       x="0"
-       y="0"
-       xlink:href="#path3-6-3-9"
-       id="use4" /><use
-       x="0"
-       y="0"
-       xlink:href="#path3-6-7-5-8"
-       id="use5" /></g><path
-     d="M 20.422985,9.2501548 V 29.968905 H 28.78236 A 1.015625,1.015625 135 0 0 29.797985,28.95328 V 9.2501548 A 1.015625,1.015625 45 0 0 28.78236,8.2345298 h -7.34375 a 1.015625,1.015625 135 0 0 -1.015625,1.015625 z m 1.015625,-0.015625 h 7.34375 V 28.968905 h -7.34375 z"
-     style="fill:#009688;stroke-width:0.1;paint-order:stroke fill markers"
-     id="path23"
-     inkscape:path-effect="#path-effect24"
-     inkscape:original-d="M 20.422985,8.2345298 V 29.968905 h 9.375 V 8.2345298 Z m 1.015625,1 h 7.34375 V 28.968905 h -7.34375 z" /><path
-     d="m 11.047985,11.324808 v 19.616307 a 1.059034,1.059034 45 0 0 1.059034,1.059034 h 7.256932 a 1.059034,1.059034 135 0 0 1.059034,-1.059034 V 10.265774 h -8.315966 a 1.059034,1.059034 135 0 0 -1.059034,1.059034 z m 1.015625,-0.05903 h 7.34375 v 19.734375 h -7.34375 z"
-     style="fill:#009688;stroke-width:0.1;paint-order:stroke fill markers"
-     id="path23-8"
-     inkscape:path-effect="#path-effect25"
-     inkscape:original-d="m 11.047985,10.265774 v 21.734375 h 9.375 V 10.265774 Z m 1.015625,1 h 7.34375 v 19.734375 h -7.34375 z" /><path
-     id="use25"
-     style="fill:#009688;stroke-width:0.1;paint-order:stroke fill markers"
-     d="M 21.439453 8.234375 A 1.015625 1.015625 0 0 0 20.423828 9.25 L 20.423828 10.265625 L 12.107422 10.265625 A 1.059034 1.059034 0 0 0 11.048828 11.324219 L 11.048828 30.941406 A 1.059034 1.059034 0 0 0 12.107422 32 L 19.363281 32 A 1.059034 1.059034 0 0 0 20.423828 30.941406 L 20.423828 29.96875 L 28.783203 29.96875 A 1.015625 1.015625 0 0 0 29.798828 28.953125 L 29.798828 9.25 A 1.015625 1.015625 0 0 0 28.783203 8.234375 L 21.439453 8.234375 z M 21.439453 9.234375 L 28.783203 9.234375 L 28.783203 28.96875 L 21.439453 28.96875 L 21.439453 9.234375 z M 12.064453 11.265625 L 19.408203 11.265625 L 19.408203 31 L 12.064453 31 L 12.064453 11.265625 z " /></svg>

resources/images/texture_displacement_tile_repeat.svg

@@ -1 +0,0 @@
-<svg xmlns="http://www.w3.org/2000/svg" width="16" height="16" viewBox="0 0 16 16"><polygon points="0.5 14.5 1.5 14.5 5.5 7.5 1.5 0.5 0.5 0.5 0.5 14.5" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/><rect x="7" width="1" height="3" style="fill:#009688"/><rect x="7" y="4" width="1" height="1" style="fill:#009688"/><rect x="7" y="6" width="1" height="3" style="fill:#009688"/><rect x="7" y="10" width="1" height="1" style="fill:#009688"/><rect x="7" y="12" width="1" height="3" style="fill:#009688"/><polygon points="9.5 14.5 10.5 14.5 14.5 7.5 10.5 0.5 9.5 0.5 9.5 14.5" style="fill:none;stroke:#009688;stroke-linecap:round;stroke-linejoin:round"/></svg>

resources/images/texture_displacement_unjoin.svg

@@ -1,387 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<svg
-   width="40"
-   height="40"
-   viewBox="0 0 40 40"
-   version="1.1"
-   id="svg17"
-   sodipodi:docname="texture_displacement_unjoin.svg"
-   inkscape:version="1.4.2 (f4327f4, 2025-05-13)"
-   xml:space="preserve"
-   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
-   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
-   xmlns:xlink="http://www.w3.org/1999/xlink"
-   xmlns="http://www.w3.org/2000/svg"
-   xmlns:svg="http://www.w3.org/2000/svg"><defs
-     id="defs17"><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect35"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 | F,0,1,1,0,0.24375,0,1 @ F,0,1,1,0,0.24375,0,1 @ F,0,1,1,0,0.24375,0,1 @ F,0,0,1,0,0.24375,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect34"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,0,1,0,0.965625,0,1 @ F,0,0,1,0,0.965625,0,1 @ F,0,0,1,0,0.965625,0,1 @ F,0,0,1,0,0.965625,0,1 | F,0,0,1,0,0.3257813,0,1 @ F,0,1,1,0,0.3257813,0,1 @ F,0,1,1,0,0.3257813,0,1 @ F,0,1,1,0,0.3257813,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect33"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect31"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,0,1,0,1.2263883,0,1 @ F,0,0,1,0,1.2263883,0,1 @ F,0,0,1,0,1.2263883,0,1 @ F,0,0,1,0,1.2263883,0,1 | F,0,1,1,0,0.47508735,0,1 @ F,0,1,1,0,0.47508735,0,1 @ F,0,1,1,0,0.47508735,0,1 @ F,0,1,1,0,0.47508735,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect30"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,1,1,0,1.2615305,0,1 @ F,0,0,1,0,1.2615305,0,1 @ F,0,1,1,0,1.2615305,0,1 @ F,0,1,1,0,1.2615305,0,1 | F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect29"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,1,1,0,1.015625,0,1 @ F,0,0,1,0,0,0,1 @ F,0,1,1,0,1.015625,0,1 @ F,0,0,1,0,1.015625,0,1 | F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect27"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,1,1,0,1.059034,0,1 @ F,0,0,1,0,1.059034,0,1 @ F,0,1,1,0,1.059034,0,1 @ F,0,0,1,0,0,0,1 | F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect25"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,1,1,0,1.059034,0,1 @ F,0,0,1,0,1.059034,0,1 @ F,0,1,1,0,1.059034,0,1 @ F,0,0,1,0,0,0,1 | F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect24"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,1,1,0,1.015625,0,1 @ F,0,0,1,0,0,0,1 @ F,0,1,1,0,1.015625,0,1 @ F,0,0,1,0,1.015625,0,1 | F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect23"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,1,0,1 | F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect21"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,0,1,0,1,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0.459375,0,1 @ F,0,0,1,0,0.499968,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0.5002363,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0.4828125,0,1 @ F,0,0,1,0,0.50584,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect19"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,0,1,0,1,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0.459375,0,1 @ F,0,0,1,0,0.499968,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0.5002363,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0.4828125,0,1 @ F,0,0,1,0,0.50584,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect17"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,0,1,0,1,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0.459375,0,1 @ F,0,0,1,0,0.499968,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0.5002363,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0.4828125,0,1 @ F,0,0,1,0,0.50584,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect15"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,0,1,0,1,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0.5002363,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><linearGradient
-       id="swatch7"
-       inkscape:swatch="solid"><stop
-         style="stop-color:#77eaa3;stop-opacity:1;"
-         offset="0"
-         id="stop7" /></linearGradient><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect3"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,0,1,0,0.49883385,0,1 @ F,0,0,1,0,0.48672135,0,1 @ F,0,0,1,0,0.5261776,0,1 @ F,0,0,1,0,0.50001454,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect2"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect31-9"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,0,1,0,1.2263883,0,1 @ F,0,0,1,0,1.2263883,0,1 @ F,0,0,1,0,1.2263883,0,1 @ F,0,0,1,0,1.2263883,0,1 | F,0,1,1,0,0.47508735,0,1 @ F,0,1,1,0,0.47508735,0,1 @ F,0,1,1,0,0.47508735,0,1 @ F,0,1,1,0,0.47508735,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect31-9-1"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,0,1,0,1.2263883,0,1 @ F,0,0,1,0,1.2263883,0,1 @ F,0,0,1,0,1.2263883,0,1 @ F,0,0,1,0,1.2263883,0,1 | F,0,1,1,0,0.47508735,0,1 @ F,0,1,1,0,0.47508735,0,1 @ F,0,1,1,0,0.47508735,0,1 @ F,0,1,1,0,0.47508735,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /><inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect35-7"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 | F,0,1,1,0,0.24375,0,1 @ F,0,1,1,0,0.24375,0,1 @ F,0,1,1,0,0.24375,0,1 @ F,0,0,1,0,0.24375,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" /></defs><sodipodi:namedview
-     id="namedview17"
-     pagecolor="#ffffff"
-     bordercolor="#000000"
-     borderopacity="0.25"
-     inkscape:showpageshadow="2"
-     inkscape:pageopacity="0.0"
-     inkscape:pagecheckerboard="0"
-     inkscape:deskcolor="#d1d1d1"
-     inkscape:zoom="32"
-     inkscape:cx="18.3125"
-     inkscape:cy="22.328125"
-     inkscape:window-width="3840"
-     inkscape:window-height="2126"
-     inkscape:window-x="-11"
-     inkscape:window-y="-11"
-     inkscape:window-maximized="1"
-     inkscape:current-layer="svg17" /><path
-     d="m 33.973006,35.500013 h -0.999987 a 0.500013,0.500013 0 0 1 0,-1.000026 h 0.999987 A 0.49999998,0.49999998 0 0 0 34.473,33.999994 v -5.000013 a 0.5000126,0.5000126 0 0 1 1.000025,0 v 5.000013 a 1.5,1.5 0 0 1 -1.500019,1.500019 z"
-     style="fill:#b6b6b6;stroke-width:0.999999"
-     id="path3-6" /><path
-     d="m 35.473026,33.999994 v -0.999987 a 0.500013,0.500013 0 0 0 -1.000026,0 v 0.999987 a 0.49999998,0.49999998 0 0 1 -0.499993,0.499994 h -5.000013 a 0.5000126,0.5000126 0 0 0 0,1.000025 h 5.000013 a 1.5,1.5 0 0 0 1.500019,-1.500019 z"
-     style="fill:#b6b6b6;stroke-width:0.999999"
-     id="path3-6-7" /><path
-     d="m 5.9730079,35.500013 h 0.999987 a 0.500013,0.500013 0 0 0 0,-1.000026 h -0.999987 a 0.49999998,0.49999998 0 0 1 -0.499994,-0.499993 v -5.000013 a 0.5000126,0.5000126 0 0 0 -1.000025,0 v 5.000013 a 1.5,1.5 0 0 0 1.500019,1.500019 z"
-     style="fill:#b6b6b6;stroke-width:0.999999"
-     id="path3-6-3" /><path
-     d="m 4.4729879,33.999994 v -0.999987 a 0.500013,0.500013 0 0 1 1.000026,0 v 0.999987 a 0.49999998,0.49999998 0 0 0 0.499993,0.499994 H 10.97302 a 0.5000126,0.5000126 0 0 1 0,1.000025 H 5.9730069 a 1.5,1.5 0 0 1 -1.500019,-1.500019 z"
-     style="fill:#b6b6b6;stroke-width:0.999999"
-     id="path3-6-7-5" /><path
-     d="m 5.9730079,4.499987 h 0.999987 a 0.50001302,0.50001302 0 0 1 0,1.000026 h -0.999987 a 0.49999998,0.49999998 0 0 0 -0.499994,0.499993 v 5.000013 a 0.5000126,0.5000126 0 0 1 -1.0000251,0 V 6.000006 A 1.5,1.5 0 0 1 5.9730079,4.499987 Z"
-     style="fill:#b6b6b6;stroke-width:0.999999"
-     id="path3-6-3-9" /><path
-     d="m 4.4729878,6.000006 v 0.999987 a 0.50001302,0.50001302 0 0 0 1.0000261,0 V 6.000006 A 0.49999998,0.49999998 0 0 1 5.9730068,5.500012 H 10.97302 a 0.5000126,0.5000126 0 0 0 0,-1.000025 H 5.9730068 a 1.5,1.5 0 0 0 -1.500019,1.500019 z"
-     style="fill:#b6b6b6;stroke-width:0.999999"
-     id="path3-6-7-5-8" /><path
-     d="m 33.973006,4.499986 h -0.999987 a 0.50001302,0.50001302 0 0 0 0,1.000026 h 0.999987 A 0.49999998,0.49999998 0 0 1 34.473,6.000005 v 5.000013 a 0.5000126,0.5000126 0 0 0 1.000025,0 V 6.000005 A 1.5,1.5 0 0 0 33.973006,4.499986 Z"
-     style="fill:#b6b6b6;stroke-width:0.999999"
-     id="path3-6-3-9-8" /><path
-     d="m 35.473026,6.000005 v 0.999987 a 0.50001305,0.50001305 0 0 1 -1.000026,0 V 6.000005 A 0.49999998,0.49999998 0 0 0 33.973007,5.500011 h -5.000013 a 0.5000126,0.5000126 0 0 1 0,-1.000025 h 5.000013 a 1.5,1.5 0 0 1 1.500019,1.500019 z"
-     style="fill:#b6b6b6;stroke-width:0.999999"
-     id="path3-6-7-5-8-2" /><g
-     id="g5"><use
-       x="0"
-       y="0"
-       xlink:href="#path3-6-3-9"
-       id="use4" /><use
-       x="0"
-       y="0"
-       xlink:href="#path3-6-7-5-8"
-       id="use5" /></g><path
-     id="rect35"
-     style="fill:#009688;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.1;stroke-dasharray:none;stroke-opacity:1;paint-order:stroke fill markers"
-     d="m 11.154297,12.015625 c -0.277007,0 -0.5,0.222993 -0.5,0.5 v 9.050781 c 0,0.0019 -2.2e-5,0.0039 0,0.0059 -2.3e-5,0.002 0,0.0039 0,0.0059 3.45e-4,0.01513 0.0023,0.03016 0.0039,0.04492 0.02282,0.255546 0.234414,0.455078 0.496094,0.455078 h 9.050781 c 0.277007,0 0.5,-0.222993 0.5,-0.5 v -0.002 -9.048828 c 9e-5,-0.0039 0,-0.0078 0,-0.01172 0,-0.277007 -0.222993,-0.5 -0.5,-0.5 z m 0.74375,1 h 7.563281 a 0.24375,0.24375 45 0 1 0.24375,0.24375 v 7.575 a 0.24375,0.24375 135 0 1 -0.24375,0.24375 h -7.563281 a 0.24375,0.24375 45 0 1 -0.24375,-0.24375 v -7.575 a 0.24375,0.24375 135 0 1 0.24375,-0.24375 z"
-     inkscape:path-effect="#path-effect35"
-     inkscape:original-d="m 11.154297,12.015625 c -0.277007,0 -0.5,0.222993 -0.5,0.5 v 9.050781 c 0,0.0019 -2.2e-5,0.0039 0,0.0059 -2.3e-5,0.002 0,0.0039 0,0.0059 3.45e-4,0.01513 0.0023,0.03016 0.0039,0.04492 0.02282,0.255546 0.234414,0.455078 0.496094,0.455078 h 9.050781 c 0.277007,0 0.5,-0.222993 0.5,-0.5 v -0.002 -9.048828 c 9e-5,-0.0039 0,-0.0078 0,-0.01172 0,-0.277007 -0.222993,-0.5 -0.5,-0.5 z m 0.5,1 h 8.050781 v 8.0625 h -8.050781 z"
-     transform="translate(-1.142612,2.9530855)" /><path
-     id="rect35-3"
-     style="fill:#009688;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.1;stroke-dasharray:none;stroke-opacity:1;paint-order:stroke fill markers"
-     d="m 11.154297,12.015625 c -0.277007,0 -0.5,0.222993 -0.5,0.5 v 9.050781 c 0,0.0019 -2.2e-5,0.0039 0,0.0059 -2.3e-5,0.002 0,0.0039 0,0.0059 3.45e-4,0.01513 0.0023,0.03016 0.0039,0.04492 0.02282,0.255546 0.234414,0.455078 0.496094,0.455078 h 9.050781 c 0.277007,0 0.5,-0.222993 0.5,-0.5 v -0.002 -9.048828 c 9e-5,-0.0039 0,-0.0078 0,-0.01172 0,-0.277007 -0.222993,-0.5 -0.5,-0.5 z m 0.74375,1 h 7.563281 a 0.24375,0.24375 45 0 1 0.24375,0.24375 v 7.575 a 0.24375,0.24375 135 0 1 -0.24375,0.24375 h -7.563281 a 0.24375,0.24375 45 0 1 -0.24375,-0.24375 v -7.575 a 0.24375,0.24375 135 0 1 0.24375,-0.24375 z"
-     inkscape:path-effect="#path-effect35-7"
-     inkscape:original-d="m 11.154297,12.015625 c -0.277007,0 -0.5,0.222993 -0.5,0.5 v 9.050781 c 0,0.0019 -2.2e-5,0.0039 0,0.0059 -2.3e-5,0.002 0,0.0039 0,0.0059 3.45e-4,0.01513 0.0023,0.03016 0.0039,0.04492 0.02282,0.255546 0.234414,0.455078 0.496094,0.455078 h 9.050781 c 0.277007,0 0.5,-0.222993 0.5,-0.5 v -0.002 -9.048828 c 9e-5,-0.0039 0,-0.0078 0,-0.01172 0,-0.277007 -0.222993,-0.5 -0.5,-0.5 z m 0.5,1 h 8.050781 v 8.0625 h -8.050781 z"
-     transform="translate(10.783203,2.9530855)" /></svg>

resources/images/texture_displacement_uv_avg_scale.svg

@@ -1 +0,0 @@
-<svg xmlns="http://www.w3.org/2000/svg" width="16" height="16" viewBox="0 0 16 16"><rect x="1" y="5.5" width="4" height="4" fill="none" stroke="#949494" stroke-linecap="round" stroke-linejoin="round"/><rect x="6" y="5.5" width="4" height="4" fill="none" stroke="#009688" stroke-linecap="round" stroke-linejoin="round"/><rect x="11" y="5.5" width="4" height="4" fill="none" stroke="#949494" stroke-linecap="round" stroke-linejoin="round"/><path d="M2 12.5h12" fill="none" stroke="#949494" stroke-linecap="round" stroke-linejoin="round" stroke-dasharray="1 1.6"/></svg>

resources/images/texture_displacement_uv_bg_height.svg

@@ -1 +0,0 @@
-<svg xmlns="http://www.w3.org/2000/svg" width="16" height="16" viewBox="0 0 16 16"><rect x="1.5" y="1.5" width="13" height="13" fill="none" stroke="#949494" stroke-linecap="round" stroke-linejoin="round"/><path d="M1.5 10c2-3 3.5-3 5 0s3 3 5 0c1-1.5 2-1.5 3-.5" fill="none" stroke="#009688" stroke-linecap="round" stroke-linejoin="round"/></svg>

resources/images/texture_displacement_uv_clear_edits.svg

@@ -1 +0,0 @@
-<svg xmlns="http://www.w3.org/2000/svg" width="16" height="16" viewBox="0 0 16 16"><path d="M4 6.5h6a3.5 3.5 0 0 1 0 7H6" fill="none" stroke="#949494" stroke-linecap="round" stroke-linejoin="round"/><polyline points="6.5 4 4 6.5 6.5 9" fill="none" stroke="#009688" stroke-linecap="round" stroke-linejoin="round"/></svg>

resources/images/texture_displacement_uv_cut.svg

@@ -1 +0,0 @@
-<svg xmlns="http://www.w3.org/2000/svg" width="16" height="16" viewBox="0 0 16 16"><rect x="2.5" y="2.5" width="11" height="11" fill="none" stroke="#949494" stroke-linecap="round" stroke-linejoin="round"/><line x1="1" y1="15" x2="15" y2="1" fill="none" stroke="#009688" stroke-linecap="round" stroke-linejoin="round"/></svg>

resources/images/texture_displacement_uv_frame.svg

@@ -1 +0,0 @@
-<svg xmlns="http://www.w3.org/2000/svg" width="16" height="16" viewBox="0 0 16 16"><path d="M1.5 5V1.5H5M11 1.5h3.5V5M14.5 11v3.5H11M5 14.5H1.5V11" fill="none" stroke="#949494" stroke-linecap="round" stroke-linejoin="round"/><rect x="5.5" y="5.5" width="5" height="5" fill="none" stroke="#009688" stroke-linecap="round" stroke-linejoin="round"/></svg>

resources/images/texture_displacement_uv_join.svg

@@ -1 +0,0 @@
-<svg xmlns="http://www.w3.org/2000/svg" width="16" height="16" viewBox="0 0 16 16"><rect x="1.5" y="4.5" width="6" height="7" fill="none" stroke="#949494" stroke-linecap="round" stroke-linejoin="round"/><rect x="7.5" y="4.5" width="7" height="7" fill="none" stroke="#949494" stroke-linecap="round" stroke-linejoin="round"/><line x1="7.5" y1="4.5" x2="7.5" y2="11.5" stroke="#009688" stroke-width="1.8"/></svg>

resources/images/texture_displacement_uv_path.svg

@@ -1 +0,0 @@
-<svg xmlns="http://www.w3.org/2000/svg" width="16" height="16" viewBox="0 0 16 16"><polyline points="2.5 12.5 6 8 9.5 9.5 13 3.5" fill="none" stroke="#949494" stroke-linecap="round" stroke-linejoin="round"/><circle cx="2.5" cy="12.5" r="1.7" fill="#009688"/><circle cx="13" cy="3.5" r="1.7" fill="#009688"/></svg>

resources/images/texture_displacement_uv_seam.svg

@@ -1 +0,0 @@
-<svg xmlns="http://www.w3.org/2000/svg" width="16" height="16" viewBox="0 0 16 16"><polygon points="1.5 13.5 7.5 1.5 13.5 13.5" fill="none" stroke="#949494" stroke-linecap="round" stroke-linejoin="round"/><line x1="7.5" y1="1.5" x2="7.5" y2="13.5" stroke="#009688" stroke-width="1.6" stroke-linecap="round" stroke-dasharray="2 1.7"/></svg>

resources/images/texture_displacement_uv_select_edge.svg

@@ -1 +0,0 @@
-<svg xmlns="http://www.w3.org/2000/svg" width="16" height="16" viewBox="0 0 16 16"><polygon points="1.5 13.5 3.5 2.5 13.5 1.5 12.5 12.5" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/><line x1="3.5" y1="2.5" x2="12.5" y2="12.5" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/><line x1="3.5" y1="2.5" x2="13.5" y2="1.5" style="fill:none;stroke:#009688;stroke-width:2;stroke-linecap:round"/></svg>

resources/images/texture_displacement_uv_select_island.svg

@@ -1 +0,0 @@
-<svg xmlns="http://www.w3.org/2000/svg" width="16" height="16" viewBox="0 0 16 16"><polygon points="0.5 1.5 6.5 0.5 7.5 6.5 1.5 7.5" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/><polygon points="9.5 1.5 14.5 2.5 11.5 6.5" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/><polygon points="1.5 9.5 5.5 9 6 14.5 0.5 13.5" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/><polygon points="8.5 8.5 14.5 7.5 13.5 14.5 7.5 13.5" style="fill:#009688;stroke:#009688;stroke-linejoin:round"/></svg>

resources/images/texture_displacement_uv_select_vertex.svg

@@ -1 +0,0 @@
-<svg xmlns="http://www.w3.org/2000/svg" width="16" height="16" viewBox="0 0 16 16"><polygon points="1.5 13.5 3.5 2.5 13.5 1.5 12.5 12.5" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/><line x1="3.5" y1="2.5" x2="12.5" y2="12.5" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/><circle cx="1.5" cy="13.5" r="1" style="fill:#949494"/><circle cx="12.5" cy="12.5" r="1" style="fill:#949494"/><circle cx="3.5" cy="2.5" r="1" style="fill:#949494"/><circle cx="13.5" cy="1.5" r="1.8" style="fill:#009688"/></svg>

resources/images/texture_displacement_uv_snap.svg

@@ -1 +0,0 @@
-<svg xmlns="http://www.w3.org/2000/svg" width="16" height="16" viewBox="0 0 16 16"><path d="M3 2v5.5a5 5 0 0 0 10 0V2" fill="none" stroke="#949494" stroke-linecap="round" stroke-linejoin="round"/><path d="M5.4 2v5.5a2.6 2.6 0 0 0 5.2 0V2" fill="none" stroke="#949494" stroke-linecap="round" stroke-linejoin="round"/><path d="M3 2h2.4M10.6 2H13" stroke="#009688" stroke-width="2" stroke-linecap="round"/></svg>

resources/images/texture_displacement_uv_unjoin.svg

@@ -1 +0,0 @@
-<svg xmlns="http://www.w3.org/2000/svg" width="16" height="16" viewBox="0 0 16 16"><rect x="0.5" y="4.5" width="5.5" height="7" fill="none" stroke="#949494" stroke-linecap="round" stroke-linejoin="round"/><rect x="10" y="4.5" width="5.5" height="7" fill="none" stroke="#949494" stroke-linecap="round" stroke-linejoin="round"/><line x1="8" y1="3" x2="8" y2="13" stroke="#009688" stroke-dasharray="1.6 1.6"/></svg>

resources/images/texture_displacement_wireframe.svg

@@ -1 +0,0 @@
-<svg xmlns="http://www.w3.org/2000/svg" width="16" height="16" viewBox="0 0 16 16"><rect x="0.5" y="0.5" width="14" height="14" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/><path d="M0.5 7.5h14M7.5 0.5v14M0.5 0.5l14 14M14.5 0.5l-14 14" style="fill:none;stroke:#009688;stroke-linecap:round;stroke-linejoin:round"/></svg>

resources/images/toolbar_big_brush.svg

@@ -1,60 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<svg
-   width="40"
-   height="40"
-   viewBox="0 0 40 40"
-   version="1.1"
-   id="svg17"
-   sodipodi:docname="toolbar_big_brush.svg"
-   inkscape:version="1.4.2 (f4327f4, 2025-05-13)"
-   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
-   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
-   xmlns="http://www.w3.org/2000/svg"
-   xmlns:svg="http://www.w3.org/2000/svg">
-  <defs
-     id="defs17" />
-  <sodipodi:namedview
-     id="namedview17"
-     pagecolor="#ffffff"
-     bordercolor="#000000"
-     borderopacity="0.25"
-     inkscape:showpageshadow="2"
-     inkscape:pageopacity="0.0"
-     inkscape:pagecheckerboard="0"
-     inkscape:deskcolor="#d1d1d1"
-     inkscape:zoom="5.6568543"
-     inkscape:cx="-13.081475"
-     inkscape:cy="98.994949"
-     inkscape:window-width="3840"
-     inkscape:window-height="2126"
-     inkscape:window-x="-11"
-     inkscape:window-y="-11"
-     inkscape:window-maximized="1"
-     inkscape:current-layer="svg17" />
-  <path
-     d="m 33.973006,35.500013 h -0.999987 a 0.500013,0.500013 0 0 1 0,-1.000026 h 0.999987 A 0.49999998,0.49999998 0 0 0 34.473,33.999994 v -5.000013 a 0.5000126,0.5000126 0 0 1 1.000025,0 v 5.000013 a 1.5,1.5 0 0 1 -1.500019,1.500019 z"
-     style="fill:#b6b6b6;stroke-width:0.999999"
-     id="path3-6" />
-  <path
-     d="M 19.973012,35.500013 H 5.9730109 a 1.5,1.5 0 0 1 -1.5,-1.500019 V 6.000006 a 1.5,1.5 0 0 1 1.5,-1.500019 H 33.973006 a 1.5,1.5 0 0 1 1.500019,1.500019 v 12.999987 a 0.5000126,0.5000126 0 0 1 -1.000025,0 V 6.000006 A 0.49999998,0.49999998 0 0 0 33.973006,5.500012 H 5.9730109 a 0.49999998,0.49999998 0 0 0 -0.499997,0.499994 v 27.999988 a 0.49999998,0.49999998 0 0 0 0.499997,0.499993 H 19.973012 a 0.500013,0.500013 0 0 1 0,1.000026 z"
-     style="fill:#b6b6b6;stroke-width:0.999999;fill-opacity:1"
-     id="path4-6" />
-  <path
-     id="path30"
-     style="fill:#009688;fill-opacity:1;stroke-width:0;stroke-opacity:0;paint-order:stroke fill markers"
-     d="M 30.109375 6.9648438 A 1.8710937 1.8710937 0 0 0 28.705078 7.5996094 A 1.8710937 1.8710937 0 0 0 28.591797 7.7421875 L 18.103516 20.615234 A 6.1070809 6.1070809 0 0 0 17.226562 20.552734 A 6.1070809 6.1070809 0 0 0 11.513672 24.503906 A 6.1070809 6.1070809 0 0 0 11.121094 26.658203 A 6.1070809 6.1070809 0 0 0 11.121094 26.757812 A 4.4931102 4.4931102 0 0 1 11.15625 27.3125 A 4.4931102 4.4931102 0 0 1 7.7890625 31.662109 A 4.4931102 4.4931102 0 0 1 7.5839844 31.708984 A 0.55609465 0.55242634 0 0 0 7.2558594 32.212891 A 0.55609465 0.55242634 0 0 0 7.8105469 32.765625 A 0.55609465 0.55242634 0 0 0 7.8125 32.765625 L 7.9570312 32.765625 L 17.224609 32.765625 L 17.226562 32.765625 A 6.1070809 6.1070809 0 0 0 23.333984 26.658203 A 6.1070809 6.1070809 0 0 0 22.792969 24.144531 L 31.666016 9.875 A 1.8710937 1.8710937 0 0 1 31.638672 9.9101562 A 1.8710937 1.8710937 0 0 0 31.699219 9.8242188 A 1.8710937 1.8710937 0 0 0 31.980469 8.8359375 A 1.8710937 1.8710937 0 0 0 31.724609 7.890625 A 1.8710937 1.8710937 0 0 0 30.480469 7.0019531 A 1.8710937 1.8710937 0 0 0 30.109375 6.9648438 z M 28.525391 7.8476562 A 1.8710937 1.8710937 0 0 0 28.472656 7.9335938 A 1.8710937 1.8710937 0 0 1 28.478516 7.9199219 A 1.8710937 1.8710937 0 0 1 28.525391 7.8476562 z M 30.109375 7.9570312 A 0.87817276 0.87817276 0 0 1 30.988281 8.8359375 A 0.87817276 0.87817276 0 0 1 30.90625 9.2050781 A 0.87817276 0.87817276 0 0 1 30.791016 9.390625 L 29.974609 10.703125 L 22.230469 23.15625 A 6.1070809 6.1070809 0 0 0 19.183594 20.873047 L 28.388672 9.5703125 L 29.359375 8.3808594 A 0.87817276 0.87817276 0 0 1 29.511719 8.1933594 A 0.87817276 0.87817276 0 0 1 30.109375 7.9570312 z M 28.457031 7.9628906 A 1.8710937 1.8710937 0 0 0 28.373047 8.1425781 A 1.8710937 1.8710937 0 0 1 28.457031 7.9628906 z M 28.300781 8.359375 A 1.8710937 1.8710937 0 0 0 28.263672 8.5507812 A 1.8710937 1.8710937 0 0 1 28.298828 8.3613281 A 1.8710937 1.8710937 0 0 1 28.300781 8.359375 z M 17.226562 21.65625 A 5.0022264 5.0022264 0 0 1 22.230469 26.658203 A 5.0022264 5.0022264 0 0 1 17.226562 31.662109 L 13.724609 31.662109 L 10.199219 31.662109 A 5.6057596 5.6057596 0 0 0 11.822266 29.501953 A 5.6057596 5.6057596 0 0 0 12.267578 27.3125 A 5.0022264 5.0022264 0 0 1 12.224609 26.658203 A 5.0022264 5.0022264 0 0 1 12.224609 26.621094 A 5.0022264 5.0022264 0 0 1 17.226562 21.65625 z " />
-  <rect
-     style="fill:#b6b6b6;fill-opacity:1;stroke:none;stroke-width:0;stroke-linejoin:miter;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:0;paint-order:stroke fill markers"
-     id="rect40"
-     width="15.363631"
-     height="1.000026"
-     x="18.609375"
-     y="34.499989" />
-  <rect
-     style="fill:#b6b6b6;fill-opacity:1;stroke:none;stroke-width:0;stroke-linejoin:miter;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:0;paint-order:stroke fill markers"
-     id="rect41"
-     width="1.000025"
-     height="11.921875"
-     x="34.473"
-     y="18.546875" />
-</svg>

resources/images/toolbar_face.svg

@@ -1,97 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<svg
-   width="40"
-   height="40"
-   viewBox="0 0 40 40"
-   version="1.1"
-   id="svg17"
-   sodipodi:docname="toolbar_face.svg"
-   inkscape:version="1.4.2 (f4327f4, 2025-05-13)"
-   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
-   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
-   xmlns="http://www.w3.org/2000/svg"
-   xmlns:svg="http://www.w3.org/2000/svg">
-  <defs
-     id="defs17">
-    <inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect48"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,0,1,0,1.0055868,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,1.4911902,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,1.0376412,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 | F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" />
-    <inkscape:path-effect
-       effect="fillet_chamfer"
-       id="path-effect47"
-       is_visible="true"
-       lpeversion="1"
-       nodesatellites_param="F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1 @ F,0,0,1,0,0,0,1"
-       radius="0"
-       unit="px"
-       method="auto"
-       mode="F"
-       chamfer_steps="1"
-       flexible="false"
-       use_knot_distance="true"
-       apply_no_radius="true"
-       apply_with_radius="true"
-       only_selected="false"
-       hide_knots="false" />
-  </defs>
-  <sodipodi:namedview
-     id="namedview17"
-     pagecolor="#ffffff"
-     bordercolor="#000000"
-     borderopacity="0.25"
-     inkscape:showpageshadow="2"
-     inkscape:pageopacity="0.0"
-     inkscape:pagecheckerboard="0"
-     inkscape:deskcolor="#d1d1d1"
-     inkscape:zoom="22.627417"
-     inkscape:cx="23.113553"
-     inkscape:cy="18.318485"
-     inkscape:window-width="3840"
-     inkscape:window-height="2126"
-     inkscape:window-x="-11"
-     inkscape:window-y="-11"
-     inkscape:window-maximized="1"
-     inkscape:current-layer="svg17" />
-  <path
-     d="m 33.973006,35.500013 h -0.999987 a 0.500013,0.500013 0 0 1 0,-1.000026 h 0.999987 A 0.49999998,0.49999998 0 0 0 34.473,33.999994 v -5.000013 a 0.5000126,0.5000126 0 0 1 1.000025,0 v 5.000013 a 1.5,1.5 0 0 1 -1.500019,1.500019 z"
-     style="fill:#b6b6b6;stroke-width:0.999999"
-     id="path3-6" />
-  <path
-     d="M 19.973012,35.500013 H 5.9730109 a 1.5,1.5 0 0 1 -1.5,-1.500019 V 6.000006 a 1.5,1.5 0 0 1 1.5,-1.500019 H 33.973006 a 1.5,1.5 0 0 1 1.500019,1.500019 v 12.999987 a 0.5000126,0.5000126 0 0 1 -1.000025,0 V 6.000006 A 0.49999998,0.49999998 0 0 0 33.973006,5.500012 H 5.9730109 a 0.49999998,0.49999998 0 0 0 -0.499997,0.499994 v 27.999988 a 0.49999998,0.49999998 0 0 0 0.499997,0.499993 H 19.973012 a 0.500013,0.500013 0 0 1 0,1.000026 z"
-     style="fill:#b6b6b6;stroke-width:0.999999;fill-opacity:1"
-     id="path4-6" />
-  <rect
-     style="fill:#b6b6b6;fill-opacity:1;stroke:none;stroke-width:0;stroke-linejoin:miter;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:0;paint-order:stroke fill markers"
-     id="rect40"
-     width="15.363631"
-     height="1.000026"
-     x="18.609375"
-     y="34.499989" />
-  <rect
-     style="fill:#b6b6b6;fill-opacity:1;stroke:none;stroke-width:0;stroke-linejoin:miter;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:0;paint-order:stroke fill markers"
-     id="rect41"
-     width="1.000025"
-     height="11.921875"
-     x="34.473"
-     y="18.546875" />
-  <path
-     id="path42"
-     style="fill:#009688;stroke-width:0;stroke-opacity:0;paint-order:stroke fill markers;fill-opacity:1"
-     d="M 19.58431,7.9401469 19.519531,8.0820312 9.1699219,30.736328 a 0.61329334,0.61329334 42.827026 0 0 0.828125,0.767578 l 0,0 20.7832031,-7.320312 0.0019,-6.61e-4 a 0.7874119,0.7874119 107.77086 0 0 0.382891,-1.194652 L 20.714844,8.0449219 20.578195,7.8494958 A 0.57476577,0.57476577 174.78854 0 0 19.58431,7.9401469 Z M 20.232422,9.1015625 30.1875,23.332031 10.576172,30.240234 Z"
-     inkscape:path-effect="#path-effect48"
-     inkscape:original-d="M 20.001953,7.0253906 19.519531,8.0820312 9.1699219,30.736328 8.5917969,32 9.9980469,31.503906 30.78125,24.183594 31.761719,23.837891 31.166016,22.988281 20.714844,8.0449219 Z M 20.232422,9.1015625 30.1875,23.332031 10.576172,30.240234 Z" />
-</svg>

resources/images/toolbar_texture_displacement.svg

@@ -1,240 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<svg
-   width="40"
-   height="40"
-   viewBox="0 0 40 40"
-   version="1.1"
-   id="svg17"
-   sodipodi:docname="toolbar_texture_displacement.svg"
-   inkscape:version="1.4.2 (f4327f4, 2025-05-13)"
-   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
-   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
-   xmlns="http://www.w3.org/2000/svg"
-   xmlns:svg="http://www.w3.org/2000/svg">
-  <defs
-     id="defs17" />
-  <sodipodi:namedview
-     id="namedview17"
-     pagecolor="#ffffff"
-     bordercolor="#000000"
-     borderopacity="0.25"
-     inkscape:showpageshadow="2"
-     inkscape:pageopacity="0.0"
-     inkscape:pagecheckerboard="0"
-     inkscape:deskcolor="#d1d1d1"
-     inkscape:zoom="32"
-     inkscape:cx="27.578125"
-     inkscape:cy="27.671875"
-     inkscape:window-width="3840"
-     inkscape:window-height="2126"
-     inkscape:window-x="-11"
-     inkscape:window-y="-11"
-     inkscape:window-maximized="1"
-     inkscape:current-layer="svg17" />
-  <g
-     id="g17"
-     transform="translate(0.69176086,0.249987)">
-    <path
-       d="m 27.659236,35.176022 h -4.399987 c -0.508996,0 -0.844996,0 -0.954999,-0.394015 a 0.59299998,0.59299998 0 0 1 0.36,-0.669997 2.3,2.3 0 0 0 1.2,-2.188989 3.253,3.253 0 1 1 3.800012,3.205984 z M 24.12125,34.175997 h 2.988 a 2.253,2.253 0 1 0 -2.252999,-2.252976 3.445,3.445 0 0 1 -0.735001,2.252976 z"
-       style="fill:#009688;stroke-width:0.999999"
-       id="path1-6" />
-    <path
-       d="m 30.281245,30.538996 -0.846009,-0.534993 4.364031,-6.899981 A 0.222,0.222 0 0 0 33.439456,22.84588 l -5.4,6.644032 -0.776013,-0.63103 5.400001,-6.643994 a 1.222,1.222 0 0 1 1.981984,1.422992 z"
-       style="fill:#009688;stroke-width:0.999999"
-       id="path2-0" />
-    <path
-       d="m 33.281245,35.250026 h -0.999987 a 0.500013,0.500013 0 0 1 0,-1.000026 h 0.999987 a 0.49999998,0.49999998 0 0 0 0.499994,-0.499993 v -5.000013 a 0.5000126,0.5000126 0 0 1 1.000025,0 v 5.000013 a 1.5,1.5 0 0 1 -1.500019,1.500019 z"
-       style="fill:#b6b6b6;stroke-width:0.999999"
-       id="path3-6" />
-    <path
-       d="M 19.281251,35.250026 H 5.28125 a 1.5,1.5 0 0 1 -1.5,-1.500019 V 5.750019 A 1.5,1.5 0 0 1 5.28125,4.25 h 27.999995 a 1.5,1.5 0 0 1 1.500019,1.500019 v 12.999987 a 0.5000126,0.5000126 0 0 1 -1.000025,0 V 5.750019 A 0.49999998,0.49999998 0 0 0 33.281245,5.250025 H 5.28125 A 0.49999998,0.49999998 0 0 0 4.781253,5.750019 V 33.750007 A 0.49999998,0.49999998 0 0 0 5.28125,34.25 h 14.000001 a 0.500013,0.500013 0 0 1 0,1.000026 z"
-       style="fill:#b6b6b6;stroke-width:0.999999"
-       id="path4-6" />
-    <rect
-       style="fill:#009688;fill-opacity:1;stroke-width:1.00157;stroke-dasharray:none"
-       id="rect6-1"
-       width="39.379108"
-       height="0.99609375"
-       x="-19.909107"
-       y="27.094706"
-       ry="0.49804688"
-       transform="rotate(-45)" />
-    <rect
-       style="fill:#009688;fill-opacity:1;stroke-width:1.00157;stroke-dasharray:none"
-       id="rect6-2"
-       width="27.566595"
-       height="0.99609375"
-       x="7.9031763"
-       y="-0.27849278"
-       ry="0.49487707"
-       transform="rotate(45)" />
-    <g
-       id="g7"
-       transform="matrix(3.7795276,0,0,3.7795276,-350.69182,-427.25001)">
-      <rect
-         style="fill:#009688;fill-opacity:1;stroke-width:0.264999;stroke-dasharray:none"
-         id="rect6-2-2"
-         width="2.8453603"
-         height="0.2635498"
-         x="150.08304"
-         y="13.289762"
-         ry="0.1317749"
-         transform="rotate(45)"
-         rx="0.1317749" />
-      <rect
-         style="fill:#009688;fill-opacity:1;stroke-width:0.264999;stroke-dasharray:none"
-         id="rect6-2-2-2"
-         width="1.7498204"
-         height="0.2635498"
-         x="12.763216"
-         y="-149.44461"
-         ry="0.1317749"
-         transform="rotate(135)"
-         rx="0.1317749" />
-      <rect
-         style="fill:#009688;fill-opacity:1;stroke-width:0.264999;stroke-dasharray:none"
-         id="rect6-2-2-2-2"
-         width="0.82876241"
-         height="0.27337581"
-         x="13.654455"
-         y="-148.49495"
-         ry="0.1317749"
-         transform="rotate(135)"
-         rx="0.1317749" />
-      <rect
-         style="fill:#009688;fill-opacity:1;stroke-width:0.264999;stroke-dasharray:none"
-         id="rect6-2-2-6"
-         width="2.5927844"
-         height="0.25224927"
-         x="150.38367"
-         y="12.286384"
-         ry="0.12612464"
-         transform="rotate(45)"
-         rx="0.12612464" />
-      <rect
-         style="fill:#009688;fill-opacity:1;stroke-width:0.264999;stroke-dasharray:none"
-         id="rect6-2-2-6-1"
-         width="1.9647908"
-         height="0.2635498"
-         x="151.01166"
-         y="11.21043"
-         ry="0.1317749"
-         transform="rotate(45)"
-         rx="0.1317749" />
-    </g>
-    <rect
-       style="fill:#009688;fill-opacity:1;stroke-width:1.00157;stroke-dasharray:none"
-       id="rect6-2-2-8"
-       width="10.754118"
-       height="0.99609375"
-       x="-10.211728"
-       y="-31.661213"
-       ry="0.49804688"
-       transform="rotate(135)"
-       rx="0.49804688" />
-    <rect
-       style="fill:#009688;fill-opacity:1;stroke-width:1.00157;stroke-dasharray:none"
-       id="rect6-2-2-2-9"
-       width="6.6134944"
-       height="0.99609375"
-       x="-33.794979"
-       y="12.679931"
-       ry="0.49804688"
-       transform="rotate(-135)"
-       rx="0.49804688" />
-    <rect
-       style="fill:#009688;fill-opacity:1;stroke-width:1.00157;stroke-dasharray:none"
-       id="rect6-2-2-2-2-3"
-       width="3.1323304"
-       height="1.0332314"
-       x="-30.282875"
-       y="16.213961"
-       ry="0.49804688"
-       transform="rotate(-135)"
-       rx="0.49804688" />
-    <g
-       id="g7-1"
-       transform="matrix(0,-3.7795276,3.7795276,0,-427.55829,389.70233)">
-      <rect
-         style="fill:#009688;fill-opacity:1;stroke-width:0.264999;stroke-dasharray:none"
-         id="rect6-2-2-9"
-         width="2.8453603"
-         height="0.2635498"
-         x="150.08304"
-         y="13.289762"
-         ry="0.1317749"
-         transform="rotate(45)"
-         rx="0.1317749" />
-      <rect
-         style="fill:#009688;fill-opacity:1;stroke-width:0.264999;stroke-dasharray:none"
-         id="rect6-2-2-2-8"
-         width="1.7498204"
-         height="0.2635498"
-         x="12.763216"
-         y="-149.44461"
-         ry="0.1317749"
-         transform="rotate(135)"
-         rx="0.1317749" />
-      <rect
-         style="fill:#009688;fill-opacity:1;stroke-width:0.264999;stroke-dasharray:none"
-         id="rect6-2-2-2-2-6"
-         width="0.82876241"
-         height="0.27337581"
-         x="13.654455"
-         y="-148.49495"
-         ry="0.1317749"
-         transform="rotate(135)"
-         rx="0.1317749" />
-      <rect
-         style="fill:#009688;fill-opacity:1;stroke-width:0.264999;stroke-dasharray:none"
-         id="rect6-2-2-6-5"
-         width="2.5927844"
-         height="0.25224927"
-         x="150.38367"
-         y="12.286384"
-         ry="0.12612464"
-         transform="rotate(45)"
-         rx="0.12612464" />
-      <rect
-         style="fill:#009688;fill-opacity:1;stroke-width:0.264999;stroke-dasharray:none"
-         id="rect6-2-2-6-1-0"
-         width="1.9647908"
-         height="0.2635498"
-         x="151.01166"
-         y="11.21043"
-         ry="0.1317749"
-         transform="rotate(45)"
-         rx="0.1317749" />
-    </g>
-    <rect
-       style="fill:#009688;fill-opacity:1;stroke-width:1.00157;stroke-dasharray:none"
-       id="rect6-2-2-9-4"
-       width="9.0822706"
-       height="0.99609375"
-       x="-36.379971"
-       y="-4.5927153"
-       ry="0.49804688"
-       transform="rotate(-135)"
-       rx="0.49804688" />
-    <rect
-       style="fill:#009688;fill-opacity:1;stroke-width:1.00157;stroke-dasharray:none"
-       id="rect6-2-2-6-5-5"
-       width="9.7995005"
-       height="0.95338309"
-       x="-36.915619"
-       y="-8.385005"
-       ry="0.47669154"
-       transform="rotate(-135)"
-       rx="0.47669154" />
-    <rect
-       style="fill:#009688;fill-opacity:1;stroke-width:1.00157;stroke-dasharray:none"
-       id="rect6-2-2-6-1-0-0"
-       width="7.425981"
-       height="0.99609375"
-       x="-34.54211"
-       y="-12.451604"
-       ry="0.49804688"
-       transform="rotate(-135)"
-       rx="0.49804688" />
-  </g>
-</svg>

resources/profiles/Anker/machine/fdm_marlin_common.json

@@ -6,6 +6,7 @@
 	"instantiation": "false",
 	"gcode_flavor": "marlin2",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n",
+	"file_start_gcode": ";TIME:{print_time_sec}s",
 	"machine_start_gcode": "M4899 T3 ; Enable v3 jerk and S-curve acceleration \nM104 S150 ; Set hotend temp to 150 degrees to prevent ooze\nM190 S{first_layer_bed_temperature[0]} ; set and wait for bed temp to stabilize\nM109 S{first_layer_temperature[0]} ; set final nozzle temp to stabilize\nG28 ;Home\n;LAYER_COUNT:{total_layer_count}",
 	"machine_end_gcode": "M104 S0\nM140 S0\n;Retract the filament\nG92 E1\nG1 E-1 F300\nG28 X0 Y0\nM18",
 	"change_filament_gcode": "M600",

resources/profiles/Anycubic.json

@@ -1,6 +1,6 @@
 {
 	"name": "Anycubic",
-	"version": "02.04.00.05",
+	"version": "02.04.00.07",
 	"force_update": "0",
 	"description": "Anycubic configurations",
 	"machine_model_list": [
@@ -48,6 +48,10 @@
 			"name": "Anycubic Kobra 3 Max",
 			"sub_path": "machine/Anycubic Kobra 3 Max.json"
 		},
+		{
+			"name": "Anycubic Kobra 3 V2",
+			"sub_path": "machine/Anycubic Kobra 3 V2.json"
+		},
 		{
 			"name": "Anycubic Kobra Max",
 			"sub_path": "machine/Anycubic Kobra Max.json"
@@ -102,6 +106,10 @@
 			"name": "0.08mm Standard @Anycubic Kobra 3 Max 0.4 nozzle",
 			"sub_path": "process/0.08mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json"
 		},
+		{
+			"name": "0.08mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "process/0.08mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
 		{
 			"name": "0.08mm Standard @Anycubic Kobra S1 Max 0.25 nozzle",
 			"sub_path": "process/0.08mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json"
@@ -118,6 +126,10 @@
 			"name": "0.10mm Detail @Anycubic Kobra 3 0.2 nozzle",
 			"sub_path": "process/0.10mm Detail @Anycubic Kobra 3 0.2 nozzle.json"
 		},
+		{
+			"name": "0.10mm Standard @Anycubic Kobra 3 V2 0.2 nozzle",
+			"sub_path": "process/0.10mm Standard @Anycubic Kobra 3 V2 0.2 nozzle.json"
+		},
 		{
 			"name": "0.10mm Standard @Anycubic Kobra S1 Max 0.25 nozzle",
 			"sub_path": "process/0.10mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json"
@@ -142,6 +154,10 @@
 			"name": "0.12mm Standard @Anycubic Kobra 3 Max 0.4 nozzle",
 			"sub_path": "process/0.12mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json"
 		},
+		{
+			"name": "0.12mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "process/0.12mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
 		{
 			"name": "0.12mm Standard @Anycubic Kobra S1 Max 0.25 nozzle",
 			"sub_path": "process/0.12mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json"
@@ -214,6 +230,10 @@
 			"name": "0.16mm Standard @Anycubic Kobra 3 Max 0.4 nozzle",
 			"sub_path": "process/0.16mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json"
 		},
+		{
+			"name": "0.16mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "process/0.16mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
 		{
 			"name": "0.16mm Standard @Anycubic Kobra Neo 0.4 nozzle",
 			"sub_path": "process/0.16mm Standard @Anycubic Kobra Neo 0.4 nozzle.json"
@@ -286,6 +306,10 @@
 			"name": "0.20mm Standard @Anycubic Kobra 3 Max 0.8 nozzle",
 			"sub_path": "process/0.20mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json"
 		},
+		{
+			"name": "0.20mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "process/0.20mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
 		{
 			"name": "0.20mm Standard @Anycubic Kobra Neo 0.4 nozzle",
 			"sub_path": "process/0.20mm Standard @Anycubic Kobra Neo 0.4 nozzle.json"
@@ -342,6 +366,10 @@
 			"name": "0.24mm Standard @Anycubic Kobra 3 Max 0.8 nozzle",
 			"sub_path": "process/0.24mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json"
 		},
+		{
+			"name": "0.24mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "process/0.24mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
 		{
 			"name": "0.24mm Standard @Anycubic Kobra S1 Max 0.4 nozzle",
 			"sub_path": "process/0.24mm Standard @Anycubic Kobra S1 Max 0.4 nozzle.json"
@@ -370,6 +398,10 @@
 			"name": "0.28mm Standard @Anycubic Kobra 3 Max 0.4 nozzle",
 			"sub_path": "process/0.28mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json"
 		},
+		{
+			"name": "0.28mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "process/0.28mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
 		{
 			"name": "0.28mm Standard @Anycubic Kobra Neo 0.4 nozzle",
 			"sub_path": "process/0.28mm Standard @Anycubic Kobra Neo 0.4 nozzle.json"
@@ -426,6 +458,10 @@
 			"name": "0.30mm Standard @Anycubic Kobra 3 Max 0.6 nozzle",
 			"sub_path": "process/0.30mm Standard @Anycubic Kobra 3 Max 0.6 nozzle.json"
 		},
+		{
+			"name": "0.30mm Standard @Anycubic Kobra 3 V2 0.6 nozzle",
+			"sub_path": "process/0.30mm Standard @Anycubic Kobra 3 V2 0.6 nozzle.json"
+		},
 		{
 			"name": "0.30mm Standard @Anycubic Kobra S1 Max 0.6 nozzle",
 			"sub_path": "process/0.30mm Standard @Anycubic Kobra S1 Max 0.6 nozzle.json"
@@ -454,6 +490,10 @@
 			"name": "0.40mm Standard @Anycubic Kobra 3 Max 0.8 nozzle",
 			"sub_path": "process/0.40mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json"
 		},
+		{
+			"name": "0.40mm Standard @Anycubic Kobra 3 V2 0.8 nozzle",
+			"sub_path": "process/0.40mm Standard @Anycubic Kobra 3 V2 0.8 nozzle.json"
+		},
 		{
 			"name": "0.40mm Standard @Anycubic Kobra S1 Max 0.8 nozzle",
 			"sub_path": "process/0.40mm Standard @Anycubic Kobra S1 Max 0.8 nozzle.json"
@@ -477,6 +517,34 @@
 		{
 			"name": "0.56mm Standard @Anycubic Kobra S1 Max 0.8 nozzle",
 			"sub_path": "process/0.56mm Standard @Anycubic Kobra S1 Max 0.8 nozzle.json"
+		},
+		{
+			"name": "0.12mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "process/0.12mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
+		{
+			"name": "0.16mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "process/0.16mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
+		{
+			"name": "0.20mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "process/0.20mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
+		{
+			"name": "0.24mm Standard @Anycubic Kobra 3 V2 0.6 nozzle",
+			"sub_path": "process/0.24mm Standard @Anycubic Kobra 3 V2 0.6 nozzle.json"
+		},
+		{
+			"name": "0.36mm Standard @Anycubic Kobra 3 V2 0.6 nozzle",
+			"sub_path": "process/0.36mm Standard @Anycubic Kobra 3 V2 0.6 nozzle.json"
+		},
+		{
+			"name": "0.32mm Standard @Anycubic Kobra 3 V2 0.8 nozzle",
+			"sub_path": "process/0.32mm Standard @Anycubic Kobra 3 V2 0.8 nozzle.json"
+		},
+		{
+			"name": "0.48mm Standard @Anycubic Kobra 3 V2 0.8 nozzle",
+			"sub_path": "process/0.48mm Standard @Anycubic Kobra 3 V2 0.8 nozzle.json"
 		}
 	],
 	"filament_list": [
@@ -528,6 +596,10 @@
 			"name": "Anycubic ABS @Anycubic Kobra 3 Max 0.8 nozzle",
 			"sub_path": "filament/Anycubic ABS @Anycubic Kobra 3 Max 0.8 nozzle.json"
 		},
+		{
+			"name": "Anycubic ABS @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "filament/Anycubic ABS @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
 		{
 			"name": "Anycubic ABS @Anycubic Kobra S1 0.4 nozzle",
 			"sub_path": "filament/Anycubic ABS @Anycubic Kobra S1 0.4 nozzle.json"
@@ -564,6 +636,10 @@
 			"name": "Anycubic ASA @Anycubic Kobra 3 Max 0.8 nozzle",
 			"sub_path": "filament/Anycubic ASA @Anycubic Kobra 3 Max 0.8 nozzle.json"
 		},
+		{
+			"name": "Anycubic ASA @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "filament/Anycubic ASA @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
 		{
 			"name": "Anycubic ASA @Anycubic Kobra S1 0.4 nozzle",
 			"sub_path": "filament/Anycubic ASA @Anycubic Kobra S1 0.4 nozzle.json"
@@ -704,6 +780,10 @@
 			"name": "Anycubic PETG @Anycubic Kobra 3 Max 0.8 nozzle",
 			"sub_path": "filament/Anycubic PETG @Anycubic Kobra 3 Max 0.8 nozzle.json"
 		},
+		{
+			"name": "Anycubic PETG @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "filament/Anycubic PETG @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
 		{
 			"name": "Anycubic PETG @Anycubic Kobra S1 0.4 nozzle",
 			"sub_path": "filament/Anycubic PETG @Anycubic Kobra S1 0.4 nozzle.json"
@@ -768,6 +848,22 @@
 			"name": "Anycubic PLA @Anycubic Kobra 3 Max 0.8 nozzle",
 			"sub_path": "filament/Anycubic PLA @Anycubic Kobra 3 Max 0.8 nozzle.json"
 		},
+		{
+			"name": "Anycubic PLA @Anycubic Kobra 3 V2 0.2 nozzle",
+			"sub_path": "filament/Anycubic PLA @Anycubic Kobra 3 V2 0.2 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "filament/Anycubic PLA @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA @Anycubic Kobra 3 V2 0.6 nozzle",
+			"sub_path": "filament/Anycubic PLA @Anycubic Kobra 3 V2 0.6 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA @Anycubic Kobra 3 V2 0.8 nozzle",
+			"sub_path": "filament/Anycubic PLA @Anycubic Kobra 3 V2 0.8 nozzle.json"
+		},
 		{
 			"name": "Anycubic PLA @Anycubic Kobra S1 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA @Anycubic Kobra S1 0.4 nozzle.json"
@@ -792,6 +888,22 @@
 			"name": "Anycubic PLA @Anycubic Kobra X 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA @Anycubic Kobra X 0.4 nozzle.json"
 		},
+		{
+			"name": "Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "filament/Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.6 nozzle",
+			"sub_path": "filament/Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.6 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.8 nozzle",
+			"sub_path": "filament/Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.8 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA Glow @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "filament/Anycubic PLA Glow @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
 		{
 			"name": "Anycubic PLA Glow @Anycubic Kobra X 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA Glow @Anycubic Kobra X 0.4 nozzle.json"
@@ -800,6 +912,10 @@
 			"name": "Anycubic PLA High Speed @Anycubic Kobra 3 Max 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA High Speed @Anycubic Kobra 3 Max 0.4 nozzle.json"
 		},
+		{
+			"name": "Anycubic PLA High Speed @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "filament/Anycubic PLA High Speed @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
 		{
 			"name": "Anycubic PLA High Speed @Anycubic Kobra S1 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA High Speed @Anycubic Kobra S1 0.4 nozzle.json"
@@ -824,10 +940,26 @@
 			"name": "Anycubic PLA Luminous @Anycubic Kobra 3 Max 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA Luminous @Anycubic Kobra 3 Max 0.4 nozzle.json"
 		},
+		{
+			"name": "Anycubic PLA Marble @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "filament/Anycubic PLA Marble @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA Marble @Anycubic Kobra 3 V2 0.6 nozzle",
+			"sub_path": "filament/Anycubic PLA Marble @Anycubic Kobra 3 V2 0.6 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA Marble @Anycubic Kobra 3 V2 0.8 nozzle",
+			"sub_path": "filament/Anycubic PLA Marble @Anycubic Kobra 3 V2 0.8 nozzle.json"
+		},
 		{
 			"name": "Anycubic PLA Matte @Anycubic Kobra 3 Max 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA Matte @Anycubic Kobra 3 Max 0.4 nozzle.json"
 		},
+		{
+			"name": "Anycubic PLA Matte @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "filament/Anycubic PLA Matte @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
 		{
 			"name": "Anycubic PLA Matte @Anycubic Kobra S1 Max 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA Matte @Anycubic Kobra S1 Max 0.4 nozzle.json"
@@ -844,10 +976,30 @@
 			"name": "Anycubic PLA Matte @Anycubic Kobra X 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA Matte @Anycubic Kobra X 0.4 nozzle.json"
 		},
+		{
+			"name": "Anycubic PLA Metal @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "filament/Anycubic PLA Metal @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA Metal @Anycubic Kobra 3 V2 0.6 nozzle",
+			"sub_path": "filament/Anycubic PLA Metal @Anycubic Kobra 3 V2 0.6 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA Metal @Anycubic Kobra 3 V2 0.8 nozzle",
+			"sub_path": "filament/Anycubic PLA Metal @Anycubic Kobra 3 V2 0.8 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA SE @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "filament/Anycubic PLA SE @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
 		{
 			"name": "Anycubic PLA Silk @Anycubic Kobra 3 Max 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA Silk @Anycubic Kobra 3 Max 0.4 nozzle.json"
 		},
+		{
+			"name": "Anycubic PLA Silk @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "filament/Anycubic PLA Silk @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
 		{
 			"name": "Anycubic PLA Silk @Anycubic Kobra S1 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA Silk @Anycubic Kobra S1 0.4 nozzle.json"
@@ -868,6 +1020,10 @@
 			"name": "Anycubic PLA Silk @Anycubic Kobra X 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA Silk @Anycubic Kobra X 0.4 nozzle.json"
 		},
+		{
+			"name": "Anycubic PLA Translucent @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "filament/Anycubic PLA Translucent @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
 		{
 			"name": "Anycubic PLA Translucent @Anycubic Kobra S1 Max 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA Translucent @Anycubic Kobra S1 Max 0.4 nozzle.json"
@@ -980,6 +1136,10 @@
 			"name": "Anycubic TPU @Anycubic Kobra 3 Max 0.8 nozzle",
 			"sub_path": "filament/Anycubic TPU @Anycubic Kobra 3 Max 0.8 nozzle.json"
 		},
+		{
+			"name": "Anycubic TPU @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "filament/Anycubic TPU @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
 		{
 			"name": "Anycubic TPU @Anycubic Kobra S1 0.4 nozzle",
 			"sub_path": "filament/Anycubic TPU @Anycubic Kobra S1 0.4 nozzle.json"
@@ -1016,6 +1176,22 @@
 			"name": "Anycubic PETG @Anycubic Kobra 3 0.4 nozzle",
 			"sub_path": "filament/Anycubic PETG @Anycubic Kobra 3 0.4 nozzle.json"
 		},
+		{
+			"name": "Anycubic PETG @Anycubic Kobra 3 V2 0.6 nozzle",
+			"sub_path": "filament/Anycubic PETG @Anycubic Kobra 3 V2 0.6 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA Silk @Anycubic Kobra 3 V2 0.6 nozzle",
+			"sub_path": "filament/Anycubic PLA Silk @Anycubic Kobra 3 V2 0.6 nozzle.json"
+		},
+		{
+			"name": "Anycubic PETG @Anycubic Kobra 3 V2 0.8 nozzle",
+			"sub_path": "filament/Anycubic PETG @Anycubic Kobra 3 V2 0.8 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA Silk @Anycubic Kobra 3 V2 0.8 nozzle",
+			"sub_path": "filament/Anycubic PLA Silk @Anycubic Kobra 3 V2 0.8 nozzle.json"
+		},
 		{
 			"name": "Anycubic PLA @Anycubic Kobra 2 Max 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA @Anycubic Kobra 2 Max 0.4 nozzle.json"
@@ -1174,6 +1350,22 @@
 			"name": "Anycubic Kobra 3 Max 0.8 nozzle",
 			"sub_path": "machine/Anycubic Kobra 3 Max 0.8 nozzle.json"
 		},
+		{
+			"name": "Anycubic Kobra 3 V2 0.2 nozzle",
+			"sub_path": "machine/Anycubic Kobra 3 V2 0.2 nozzle.json"
+		},
+		{
+			"name": "Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "machine/Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
+		{
+			"name": "Anycubic Kobra 3 V2 0.6 nozzle",
+			"sub_path": "machine/Anycubic Kobra 3 V2 0.6 nozzle.json"
+		},
+		{
+			"name": "Anycubic Kobra 3 V2 0.8 nozzle",
+			"sub_path": "machine/Anycubic Kobra 3 V2 0.8 nozzle.json"
+		},
 		{
 			"name": "Anycubic Kobra Max 0.4 nozzle",
 			"sub_path": "machine/Anycubic Kobra Max 0.4 nozzle.json"

resources/profiles/Anycubic/filament/Anycubic ABS @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic ABS @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_filament_abs",
+	"from": "system",
+	"setting_id": "LXkKhWH9YcYPr3IT",
+	"filament_id": "OF223rZv",
+	"instantiation": "true",
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_settings_id": [
+		"Anycubic ABS @Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"filament_type": [
+		"ABS"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"5"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"5"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"20"
+	],
+	"fan_max_speed": [
+		"15"
+	],
+	"fan_min_speed": [
+		"1"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"0"
+	],
+	"filament_density": [
+		"1.05"
+	],
+	"filament_deretraction_speed": [
+		"80"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"70%"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"1"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"2"
+	],
+	"filament_retraction_minimum_travel": [
+		"1"
+	],
+	"filament_retraction_speed": [
+		"80"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"100"
+	],
+	"hot_plate_temp": [
+		"90"
+	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"15"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"16"
+	],
+	"slow_down_min_speed": [
+		"25"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"90"
+	],
+	"textured_plate_temp_initial_layer": [
+		"90"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic ASA @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic ASA @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_filament_asa",
+	"from": "system",
+	"setting_id": "cWBQa7XzDl3czIOs",
+	"filament_id": "OF0yFLkY",
+	"instantiation": "true",
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_settings_id": [
+		"Anycubic ASA @Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"filament_type": [
+		"ASA"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"nozzle_temperature": [
+		"270"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"5"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"20"
+	],
+	"fan_max_speed": [
+		"15"
+	],
+	"fan_min_speed": [
+		"1"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"30"
+	],
+	"filament_density": [
+		"1.04"
+	],
+	"filament_deretraction_speed": [
+		"80"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"70%"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"1"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"2"
+	],
+	"filament_retraction_minimum_travel": [
+		"1"
+	],
+	"filament_retraction_speed": [
+		"80"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"100"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"nozzle_temperature_initial_layer": [
+		"270"
+	],
+	"nozzle_temperature_range_high": [
+		"280"
+	],
+	"nozzle_temperature_range_low": [
+		"240"
+	],
+	"overhang_fan_speed": [
+		"15"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"16"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"100"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic PETG @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_filament_pet",
+	"from": "system",
+	"setting_id": "suyxKj9qKLtpBhhU",
+	"filament_id": "OFo6n2pB",
+	"instantiation": "true",
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_settings_id": [
+		"Anycubic PETG @Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_max_volumetric_speed": [
+		"8"
+	],
+	"nozzle_temperature": [
+		"230"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"5"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"20"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"15"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"0"
+	],
+	"filament_density": [
+		"1.23"
+	],
+	"filament_deretraction_speed": [
+		"80"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"80%"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"1"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"2"
+	],
+	"filament_retraction_minimum_travel": [
+		"1"
+	],
+	"filament_retraction_speed": [
+		"80"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"6"
+	],
+	"hot_plate_temp": [
+		"70"
+	],
+	"hot_plate_temp_initial_layer": [
+		"70"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"25"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"70"
+	],
+	"textured_plate_temp_initial_layer": [
+		"70"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra 3 V2 0.6 nozzle.json

@@ -0,0 +1,69 @@
+{
+	"type": "filament",
+	"name": "Anycubic PETG @Anycubic Kobra 3 V2 0.6 nozzle",
+	"inherits": "Anycubic PLA @Anycubic Kobra 3 V2 0.6 nozzle",
+	"from": "system",
+	"setting_id": "0uOqeEk5YgyZH4Yy",
+	"filament_id": "OFo6n2pB",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PETG @Anycubic Kobra 3 V2 0.6 nozzle"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.6 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"8"
+	],
+	"nozzle_temperature": [
+		"230"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"filament_density": [
+		"1.23"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"75"
+	],
+	"hot_plate_temp_initial_layer": [
+		"75"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"nozzle_temperature_range_high": [
+		"260"
+	],
+	"nozzle_temperature_range_low": [
+		"210"
+	],
+	"overhang_fan_speed": [
+		"80"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"temperature_vitrification": [
+		"70"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra 3 V2 0.8 nozzle.json

@@ -0,0 +1,42 @@
+{
+	"type": "filament",
+	"name": "Anycubic PETG @Anycubic Kobra 3 V2 0.8 nozzle",
+	"inherits": "Anycubic PLA @Anycubic Kobra 3 V2 0.8 nozzle",
+	"from": "system",
+	"setting_id": "OOOjWFMFhP1fMhFf",
+	"filament_id": "OFo6n2pB",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PETG @Anycubic Kobra 3 V2 0.8 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.8 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"hot_plate_temp": [
+		"70"
+	],
+	"hot_plate_temp_initial_layer": [
+		"70"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 V2 0.2 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA @Anycubic Kobra 3 V2 0.2 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "uJRZr6orTVm79FeE",
+	"filament_id": "OFmjN2bc",
+	"instantiation": "true",
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_settings_id": [
+		"Anycubic PLA @Anycubic Kobra 3 V2 0.2 nozzle"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"1.6"
+	],
+	"nozzle_temperature": [
+		"230"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.2 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp_initial_layer": [
+		"60"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "udLvkeYZ9Av7GkDz",
+	"filament_id": "OFmjN2bc",
+	"instantiation": "true",
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_settings_id": [
+		"Anycubic PLA @Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"nozzle_temperature": [
+		"210"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"80"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"60"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp_initial_layer": [
+		"60"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 V2 0.6 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA @Anycubic Kobra 3 V2 0.6 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "W69H1Vca3f74FfYj",
+	"filament_id": "OFmjN2bc",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PLA @Anycubic Kobra 3 V2 0.6 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.6 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"65"
+	],
+	"hot_plate_temp_initial_layer": [
+		"65"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"65"
+	],
+	"textured_plate_temp_initial_layer": [
+		"65"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 V2 0.8 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA @Anycubic Kobra 3 V2 0.8 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "TR27JCwXxHeVhVHN",
+	"filament_id": "OFmjN2bc",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PLA @Anycubic Kobra 3 V2 0.8 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.8 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"nozzle_temperature": [
+		"205"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"80"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.6"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"60"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"3"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"nozzle_temperature_initial_layer": [
+		"215"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp_initial_layer": [
+		"60"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "i0FTxiH68CKHiLLT",
+	"filament_id": "OF80Qbpq",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"80"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"60"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"nozzle_temperature": [
+		"210"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp_initial_layer": [
+		"60"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.6 nozzle.json

@@ -0,0 +1,258 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.6 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "XHa1HSjh0RjAo0nz",
+	"filament_id": "OF80Qbpq",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.6 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.6 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.94"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"40"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.5"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"40"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"65"
+	],
+	"hot_plate_temp_initial_layer": [
+		"65"
+	],
+	"nozzle_temperature": [
+		"210"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_layer_time_BRASS": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"65"
+	],
+	"textured_plate_temp_initial_layer": [
+		"65"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.8 nozzle.json

@@ -0,0 +1,261 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.8 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "iRVPFxNMEfkCDnMh",
+	"filament_id": "OF80Qbpq",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.8 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.8 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"80"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"fan_max_speed_BRASS": [
+		"100"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"fan_min_speed_BRASS": [
+		"100"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"40"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.5"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"40"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"3"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"nozzle_temperature": [
+		"205"
+	],
+	"nozzle_temperature_initial_layer": [
+		"215"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp_initial_layer": [
+		"60"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA Glow @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA Glow @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "itTckVFabfsVbNBK",
+	"filament_id": "OF5PtjTp",
+	"instantiation": "true",
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_settings_id": [
+		"Anycubic PLA Glow @Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"7.2"
+	],
+	"nozzle_temperature": [
+		"210"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"40"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"0%"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"1"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"60"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"2"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Auto Lift"
+	],
+	"full_fan_speed_layer": [
+		"3"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"9"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp_initial_layer": [
+		"60"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA High Speed @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA High Speed @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "YLxoiuRDXBWLQYw4",
+	"filament_id": "OFjVOWfJ",
+	"instantiation": "true",
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_settings_id": [
+		"Anycubic PLA High Speed @Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"nozzle_temperature": [
+		"205"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"2"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"nozzle_temperature_initial_layer": [
+		"210"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.035"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"7"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp_initial_layer": [
+		"60"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA Marble @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA Marble @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "JwcCfY4XVCRJaDeS",
+	"filament_id": "OFCSyK66",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PLA Marble @Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"80"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"nozzle_temperature": [
+		"210"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp_initial_layer": [
+		"60"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA Marble @Anycubic Kobra 3 V2 0.6 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA Marble @Anycubic Kobra 3 V2 0.6 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "Sjw7irNgwCZMfWS3",
+	"filament_id": "OFCSyK66",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PLA Marble @Anycubic Kobra 3 V2 0.6 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.6 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.94"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"50"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"40"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"65"
+	],
+	"hot_plate_temp_initial_layer": [
+		"65"
+	],
+	"nozzle_temperature": [
+		"210"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"65"
+	],
+	"textured_plate_temp_initial_layer": [
+		"65"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA Marble @Anycubic Kobra 3 V2 0.8 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA Marble @Anycubic Kobra 3 V2 0.8 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "HeQwxU4T2W1V0LM3",
+	"filament_id": "OFCSyK66",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PLA Marble @Anycubic Kobra 3 V2 0.8 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.8 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"80"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"40"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.5"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"40"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"3"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"nozzle_temperature": [
+		"205"
+	],
+	"nozzle_temperature_initial_layer": [
+		"210"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.035"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp_initial_layer": [
+		"60"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA Matte @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA Matte @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "H3PIqeTzjvtFQXYv",
+	"filament_id": "OFIE3vOf",
+	"instantiation": "true",
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_settings_id": [
+		"Anycubic PLA Matte @Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"9"
+	],
+	"nozzle_temperature": [
+		"210"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"3"
+	],
+	"hot_plate_temp": [
+		"65"
+	],
+	"hot_plate_temp_initial_layer": [
+		"65"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"65"
+	],
+	"textured_plate_temp_initial_layer": [
+		"65"
+	]
+}