collect_layers_to_print() drops the belt layers that print nothing (an
object's empty lead-in), but m_layer_count still counted every object
and support layer, so "total layers count", the total_layer_count
placeholder and the M73 progress disagreed with the layer changes in the
file. Count with the same predicate, shared through
belt_object_layer_prints_something(). The by-object overload of
collect_layers_to_print() now drops those layers as well, so both print
sequences write the same layer changes.
Dropping the empty entries per object has one more effect on multi-
filament belt prints: a layer no longer selects a filament that it then
prints nothing with. On belt_project.3mf (two filaments, belt purge
tower) the T commands go from 472 to 106 while the extruded length per
filament is unchanged; each of the removed tool changes was followed by
no extrusion.
The empty-layers test now runs for both print sequences and also checks
"total layers count" against the layer changes.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
In by-object printing the cooling buffer is reset for every object, but
m_belt_in_band, which tracks whether the extrusion is inside the band
along the belt where the part fan stays off, kept the previous object's
value. If the previous object ended inside the band the next one never
emitted its band start marker. Reset it with the cooling buffer.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
process_layer()'s sub-layer pass (several filaments in one layer without
a purge tower) calls set_origin() per instance like the main instance
loop, but not on_set_origin(), which on a belt printer runs the origin
through the belt transform. Add the call so both passes place the
instance the same way.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The writer hands set_first_layer_point_test() a point with the plate
origin (its own XY offset) already removed, but the test subtracted the
whole of m_origin, which carries the plate origin as well as the
instance shift. On a plate other than the first the point was moved by
the plate origin a second time and the band test looked at the wrong
spot. Subtract only the part of m_origin that is not the writer's
offset.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
dda58b07cd stripped debug instrumentation from TreeSupport3D.cpp with a
script, and that script also deleted the loop in organic_draw_branches()
that trims every branch slice against the collision volume, the bed and,
on a belt, the belt plane. This is the generator every printer uses, not
a belt code path, and it is the one place where raistlin7447's export
fixtures differed from main with belt printing off. Restore the loop as
it was on main, with the belt-floor clip.
The new test prints a cube carrying a 60 mm plate with organic supports
on a flat-bed printer and checks on every support layer that no support
extrusion comes within 0.2 mm of the part's slice. It guards that
invariant; on this fixture the loop's own effect is a sub-millimetre
reshaping of one branch (verified by slicing the fixture with and
without the loop), below the asserted gap, so the test does not by
itself fail without the loop.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Classic tree supports (tree hybrid / slim / strong) on a belt slid down
the belt plane ahead of the part instead of landing on it.
`TreeSupportData` added the belt surface to every layer's outlines, so
the belt fed the collision and avoidance maps, and a node that descends
onto an obstacle is pushed out of it; on a tilted surface that walks the
branch down the belt. This takes the belt out of the outlines. The belt
is where a branch ends, and that is already handled: `drop_nodes()`
stops a node once its whole circle is in the belt
(`belt_node_landed()`), and `draw_circles()` clips every layer's circles
to the belt plane, so the branch tapers to a tip on it. Organic got the
same treatment in #16236 (the belt is no longer a support blocker
there).
One file, +7/−12. Non-belt printers are untouched: the removed block
only ran when the belt floor context was active.
## Before / after
Cube with a fin whose underside is parallel to the layers, 20 mm ahead
of the cube, tree hybrid, Left view:
| | support footprint along the belt | filament for support |
|---|---|---|
| before | belt Z 43–139 (sweeps 72 mm ahead of the part) | 2403 mm |
| after | belt Z 60–139, columns parallel to the up direction | 1606 mm
|
Organic on the same model: belt Z 74–139 (unchanged). Before/after
screenshots follow in a comment.
## Tests
- *Belt supports reach the belt under a leading overhang* passes for
normal, organic and tree_hybrid; all `[belt]` tests pass;
`fff_print_tests` 355 and `libslic3r_tests` 1116 pass on the branch.
- `scripts/clang_tidy_diff.py --base upstream/belt-printer`: no
findings.
- Fork CI (Build all) on this change: unit tests green on Linux x86_64,
Linux aarch64 and macOS arm64
(https://github.com/HarrierPigeon/OrcaSlicer/actions/runs/37601644023;
its Windows and slice-check failures are the ones #16262 fixes).
- Scripted GUI pass on belt-printer + this change: tree hybrid, organic
and normal supports at Y≈120 all reach the belt (lowest 0.17–0.19 mm);
with the part within its height of Y = 0 all three generators now behave
the same (support before the belt start, plate-boundary error shown),
where tree hybrid used to be the odd one out (clipped, hanging 9.5 mm
above the belt).
- Written with Claude Code; reviewed and run by me.
TreeSupportData added the belt surface to every layer's outlines, so the
belt fed the classic tree's collision and avoidance maps. A node that
descends onto an obstacle is pushed out of it, and on a belt that walked
the branch down the tilted surface, ahead of the part, before it could
end: tree hybrid/slim/strong supports swept far along the belt where
organic supports dropped straight down. Take the belt out of the
outlines. The belt is where a branch ends, and that is already handled:
drop_nodes() stops a node once its whole circle is in the belt
(belt_node_landed()) and draw_circles() clips every layer's circles to
the belt plane, so the branch tapers to a tip on it.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The slice check (-s) prints one 10 mm cube per printer with a height
range on filament 2 and expects the filament change to fire. Since
#16236 a belt object's slicing Z starts at the belt below its leading
end, well below the part's first printed layer, so the range 4-10 falls
into the empty lead-in and filament 2 is never used: every belt printer
reported "the filament change never fired" and the Slice check job on
belt-printer went red. A height range in slicing Z does not map onto a
part on a belt in any case. Slice belt printers with two cubes one
behind the other along the belt, the second on filament 2, which gives
the one plain T1 the check looks for. Other printers are unchanged.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
## Speeds up OrcaSlicer incremental rebuild on Linux
Profiled `build_linux_image.sh`: 96 s, of which 51 s in the dependency
audit.
**`appimage_is_elf_file()`** ran `file` and `grep` per candidate. An
AppDir holds ~9.6k of them, 4.8k being the bundled Python runtime and
none of them ELF: ~19k processes, 14 s. Reads the four-byte magic
instead. Checked against the old result on 4000 files, no disagreement.
**The dependency walk** popped its queue with `"${queue[@]:1}"`, which
rebuilds the whole array each time. At ~4.8k entries that was 22 s of
copying an array around. Uses a read index.
Audit still passes. `shellcheck` v0.11.0, the version CI uses, is clean.
## Notes
The 96 s -> 12.7 s. Measured on a 32-core / 48 GB machine, but the audit
is a serial bash loop, so cores and RAM is not the bottleneck. On slower
hardware the saving should be larger
## Images
<img width="1987" height="782" alt="Screenshot_20261007_092516"
src="https://github.com/user-attachments/assets/96fcb917-38e5-49e7-8cbe-b37be1a2f23a"
/>
<img width="1807" height="742" alt="Screenshot_20261007_092621"
src="https://github.com/user-attachments/assets/4a65ffae-4d59-41f0-a1c7-ee5b49f3c4be"
/>
Since the slicing frame of a belt object starts at the belt below its
leading end, its first layers are empty. On a single part they carry
the brim bands; with several parts along the belt the later parts'
empty layers fall between the earlier parts' printing layers and were
written to the G-code as layer changes with no moves at all. The
preview numbers its layers (libvgcode::Layers) from the vertices it is
given and expects consecutive ids, so at the first such gap it stopped
creating layers and folded everything after it into the last one: the
top slider layer held nearly the whole print, the slider jumped every
other layer through the single-colour stretch before a second part on
another filament, and with the belt purge tower the whole print greyed
out while dragging.
Drop the belt layers that print nothing (no object, support or brim
content) in GCode::collect_layers_to_print, and renumber the layers
consecutively over the moves that exist when converting a result for
libvgcode, so a file with empty layers from any source still previews
correctly. The layer slider labels a belt layer with its print Z (the
slicer's layer Z, which increases along the belt) instead of libvgcode's
toolpath height, which on a tilted layer is wherever its last extrusion
ended; the slider assumes that list increases and showed "0 / max" on
alternate layers. The processor reads that print Z from the ";Z:" tag
non-BBL printers write (it only knew "; Z_HEIGHT:"), on belt printers
only, so nothing changes elsewhere. Regression test: two cubes 60 mm apart along the
belt produce no layer without an extrusion and the header's layer count
matches.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The device drying options hold several values per filament, as many as
the filament preset gives, and a project stores them as the filaments'
values one after another. The CLI filament merge wrote them like an
option with one value per filament, putting each preset's first value at
the filament's own index, so a project with three filaments whose preset
gives "1", "0" was exported with 1;1;1;0;1;0 where the GUI writes
1;0;1;0;1;0.
The merge now leaves these options out of the per-filament pass and
rebuilds them afterwards from every filament's values in slot order.
Without a fixed number of values per filament one slot cannot be
replaced in place, so the stored values are kept when any slot has no
config to rebuild from.
The Bambu network plug-in's code protector rewrites one page of its own signed __TEXT after loading. The hardened runtime tolerates that until the page is evicted; the next read of it then kills OrcaSlicer with CODESIGNING Invalid Page. Bambu Studio signs with allow-unsigned-executable-memory for this reason; with it added, the same build survives critical memory pressure that killed it in 30 s without.
A project's listed settings are carried onto its base preset by update_non_diff_values_to_base_config, which matched variants by exact name and id. A variant the base gained after the project was saved got the base's value, while the same value in a user preset now falls back to the preset's first variant of that extruder. So an old project opened with its printer preset already modified, and saving it wrote the base's values into the 3MF.
The function now maps variants with map_variant_indices, as update_diff_values_to_child_config does: a base variant the project does not list takes the project's first variant of the same extruder. The variant lists themselves stay the base's, so a fallback never writes one variant's name over another's.
The 02.08.02 series appended queue_plate_id to PrintParams and nothing
after it changed the ABI OrcaSlicer calls, so adding the field brings
the current layout up to 02.08.04. Make 02.08.04 the latest series and
drop 02.08.01 from the whitelist: its PrintParams no longer matches, and
its malformed bind table is refused by dyld on macOS 27, so it cannot
load there. A stored 02.08.01 falls back to the latest series through
the existing unsupported-version path.
Profiling build_linux_image.sh: 96 s, of which 51 s in the dependency audit.
appimage_is_elf_file() ran file(1) and grep per candidate. An AppDir holds ~9.6k
of them, 4.8k being the bundled Python runtime, none of them ELF: ~19k processes
for 14 s. Read the four-byte magic instead; checked against the old result on
4000 files, no disagreement.
The dependency walk popped its queue with "${queue[@]:1}", which rebuilds the
whole array each time. At ~4.8k entries that was 22 s of copying. Use a read
index.
96 s -> 12.7 s. The audit still passes.
The directive sat at global scope in a header that DeviceManager.hpp
includes, so most of the GUI compiled with all of std in the global
namespace. 42 files had come to rely on it, mostly for string, vector
and unordered_map, four of them for the ""sv and ""ms literals.
Those sites are qualified. GCodeViewer.cpp spelled the type as
std::vector<::string>, which only resolved through the directive. The
files that use the ""sv and ""ms literals get a file-scope
"using namespace std::string_view_literals;" or
"using namespace std::chrono_literals;", as other sources already do.
The "Show raw G-code (belt only)" toggle, retired in #16236, returns as
an item of the Preview canvas view menu (with its B shortcut), and only
there: no legend checkbox. Unlit, the preview shows the designed,
upright view; lit, the raw machine-frame G-code, which is what to look
at when checking the machine frame transforms. The toggle is view
only; exported G-code is the same either way.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
# Description
The default Orca Cloud API URL omits its scheme, so libcurl interprets
it as HTTP and follows the server redirect to HTTPS. Recent libcurl
versions intentionally do not forward the `Authorization` header across
protocol/port-changing redirects, causing Orca Cloud profile sync to
receive HTTP 401 `missing_authorization` responses and eventually log
the user out.
Use the HTTPS API URL directly. Besides restoring sync with current
libcurl versions, this improves security by preventing the bearer access
token from being sent in the initial unencrypted HTTP request.
# Screenshots/Recordings/Graphs
N/A — no UI changes.
## Tests
- `git diff --check`
- Confirmed with current libcurl that the scheme-less URL redirects and
loses the authorization header, while the direct HTTPS URL retains it
- ClipperUtils.hpp imported jtMiter, jtRound and jtSquare into the
global namespace for every includer. No code names them there.
- BBLStatusBar.hpp, BBLStatusBarBind.hpp, BBLStatusBarPrint.hpp,
BBLStatusBarSend.hpp and ProgressStatusBar.hpp re-exported their class
into Slic3r::GUI. Nothing refers to the class through that namespace.
- Jobs/SendJob.hpp, Jobs/BindJob.hpp, Jobs/UpgradeNetworkJob.hpp and
AuxiliaryDataViewModel.hpp declared "namespace fs = boost::filesystem;"
at global scope without using it.
Each of these headers put a using or namespace alias at global or
namespace scope, which every includer inherited:
- BBLTopbar.hpp: "using namespace Slic3r::GUI;" at global scope, reached
through MainFrame.hpp. Seven source files used GUI names unqualified
outside the namespace because of it, one of them as "::RadioBox".
- IMSlider.hpp and TickCode.hpp: "using namespace CustomGCode;" inside
Slic3r.
- ProjectTask.hpp, Jobs/PrintJob.hpp and ConfigWizard_private.hpp:
"namespace fs = boost::filesystem;". PresetBundle.cpp and GUI_App.cpp
had no alias of their own.
- VoronoiUtils.hpp: "using VD = Slic3r::Geometry::VoronoiDiagram;" at
global scope.
The headers now spell the names out. Source files that used them get
the qualifier, or a using of their own where there are many uses.
151 using-directives, using-declarations, type aliases and namespace
aliases in source and test files that nothing refers to: the name is
never used, it duplicates a using already in scope, or the code sits
inside the namespace it names. Each one was removed on its own and the
file still compiled, both as it is and with every header-level using
taken away, so none of them was only redundant because a header leaks
the same name.
With the using gone, 28 #include lines and one forward declaration had
no other reference left in their file (boost/optional.hpp without any
optional, property_tree headers without any ptree) and go with it.
No header is touched.
* Stop Leaking json Through Headers and Drop Includes Kept Only for the Name
AppConfig.hpp, DeviceManager.hpp and UserManager.hpp carried a global
"using namespace nlohmann;", json_diff.hpp a global "using json =
nlohmann::json;" and PrinterFileSystem.h a global "using nlohmann::json;".
Every file that included one of them, directly or not, could write a
bare json, and 63 did without declaring it.
The last two also made the include checker treat json_diff.hpp and
PrinterFileSystem.h as the headers that provide json, so they were
included from files that use nothing else from them: 57 of the 59
includers of json_diff.hpp never name json_diff.
The five statements are removed. Headers that use the type now spell
nlohmann::json, source files declare their own "using json =
nlohmann::json;", and the includes that only supplied the name are
dropped or replaced by <nlohmann/json.hpp>.
Eight files reached json_diff.hpp only through an include that is now
gone and with it lost that header's "using namespace std;". The std
names they used unqualified are qualified.
* Declare json in OrcaSlicer.cpp on Every Platform
OrcaSlicer.cpp had its "using namespace nlohmann;" and the json include
inside the Linux-only include block, so on Windows and macOS it took
json from AppConfig.hpp's global directive, which is gone. The include
and a "using json = nlohmann::json;" now sit outside the block.
Follow-up to #16195 and the review discussion on #14394 (yw4z's note
about the third column on the *Belt tilt* row). Removes the belt options
that are redundant or unused before the branch ships, so they never need
compatibility handling after a release, and fixes supports under a
leading overhang. Every removed key is on `handle_legacy()`'s ignore
list, so existing profiles and 3MFs load silently.
## Removed
- **`belt_slice_rotation_global`**, **`preslice_remap_global`**,
**`belt_preslice_global`** (*Global mesh transforms*) and
**`gcode_back_transform`** — the global mode and the back-transform are
what belt printing is; they are presumed on wherever the flags were
consulted (`PrintObjectSlice`, `BeltBackTransform`, `BeltGCode`,
`Print::process`, `PrintApply`, `GCodeViewer`). The *Belt tilt* row is
axis + angle only; the three `fdm_belt_common.json` drop the keys.
- **`preslice_remap_x/y/z`** — no profile used the pre-slice axis remap;
the belt tilt axis plus the G-code axis remap cover the machines that
exist, and its implementation only agreed with itself for a plain swap.
The forward transform is the rotation.
- **`belt_support_z_offset_mode`** and **`belt_support_floor_mode`** —
the first was never read by a generator; the second's only shipped value
(*Generator only*) is now the behaviour.
- **`first_layer_plane`**, **`first_layer_plane_offset`**,
**`first_layer_plane_thickness`** and `FirstLayerPlane.{cpp,hpp}` — the
first-layer band is measured from the belt surface and is one first
layer height thick.
- `belt_brim_instances_compatible()` and its validation warning:
instances along the belt get their brim.
## Supports under a leading overhang (the clipping at the object's local
Z = 0)
The slicing frame of a belt object started at its lowest vertex, but the
belt under the leading end of an overhang lies below that, so no
generator could reach it: normal supports stopped at the object's lowest
layer, and both tree generators carried extension hacks sized from the
pre-rotation bbox and capped at global Z = 0 (right only for the
trailing half of the belt). The frame now starts at the lowest
belt-floor point under the footprint, less a 10 mm margin along the belt
for the base of a support column, and the extensions are gone:
- **Normal supports** run in the object frame and get the global belt Z
offset shifted onto the result (as organic already did). With the offset
on the object layers, a top contact at negative Z turned the
intermediate-layer count negative and the generator allocated layers
until the kernel killed it — any overhang in the leading half of the
belt did this. The first-layer flange expansion is skipped on a belt
(the first support layer is the leading tip, not a flange).
- **Classic tree** nodes keep dropping until their whole circle is in
the belt, so a branch tapers to a tip on the belt instead of stopping a
radius above it.
- **Organic**: the belt is no longer a support blocker. A blocker is a
collision, and a branch descending onto one slides off it, down the belt
and ahead of the part; the belt is where branches end, which the
per-layer floor clipping already does.
Regression test *Belt supports reach the belt under a leading overhang*:
a cube with a fin whose underside is parallel to the layers, 20 mm ahead
of the cube and up to 41 mm of slicing Z above the belt, for normal,
organic and classic tree supports; the lowest support layer must sit on
the belt beneath its own lines.
The belt object height (the layer range) is now estimated from the box
of the mesh as placed on the bed. `raw_bounding_box()` has the
instance's Z offset removed, which was harmless for the old
rotated-extent estimate but not for one anchored at the belt floor (a
point's rotated z and the floor under it move in opposite directions
under a Z shift): with the first version of this change every part came
out as a wedge, sliced only up to its diagonal, in the GUI and CLI
alike. Caught by a GUI test pass; the leading-overhang test now also
checks that the whole part is sliced.
## Belt brim after the parallel support step
`belt_brim_obstacles()` reads every object's layers and support layers,
which another object's support step rebuilds (and now shifts) at the
same time. The brim is generated sequentially once the parallel step is
over (`PrintObject::generate_belt_brim()`). This is the race behind the
Windows arm64 segfault in *Belt brim of each object precedes its
perimeters on its own filament*.
## UI
- *Belt tilt* is two rows: the angle (Advanced) and the axis (Developer;
a profile-level kinematics choice). A shared line is shown by its first
option's mode, so they cannot share one.
- *Machine frame transforms* is five single-option rows (G-code remap X
/ Y / Z, Decouple machine-frame tilt, Machine-frame tilt angle — the
angle row only appears when decoupled) instead of two multi-column
lines; the remap fields got full labels since they stand alone now.
- The gravity indicator on the bed is a plain line along the up
direction (no cone, 60 % of the axes' length), per yw4z.
- The *Show raw G-code (belt only)* legend/canvas toggle and its `B`
shortcut are gone; the preview is the designed view.
Also carries the two-line `phong.fs` fix from #16226 (merges as a
no-op).
## Verification
- `libslic3r_tests` 1116 passed (92 648 assertions); `fff_print_tests`
351 passed (561 696 assertions).
- `scripts/clang_tidy_diff.py --base upstream/belt-printer`: no
findings.
- `scripts/orca_profile_tool.py check`: no profile references a removed
key.
- GUI target builds; a scripted GUI pass (xdotool) checked the settings
groups in every mode, slicing, export, instances, the purge tower,
calibration dialogs, the wizard, printer switching and 3MF round-trip.
The wiki pages (OrcaSlicer/OrcaSlicer_WIKI#374) get a follow-up dropping
the removed sections once this is in.
The belt object height is estimated from a bounding box swept through
the tilt rotation. raw_bounding_box() has the instance's Z offset
removed, which did not matter while the estimate was the box's rotated
Z extent (a Z shift moves every corner alike), but the frame now starts
at the lowest belt-floor point under the footprint, and a point's
rotated z and the floor under it move in opposite directions under a Z
shift: the offset box under-estimated the height by twice the object's
height above the bed, so the layers stopped at the part's diagonal and
every part came out as a wedge (GUI and CLI alike; the unit tests never
checked the top). Use the box of the mesh in the frame it is sliced in
(trafo_centered(), Z as placed on the bed), and have the leading
overhang test check that the whole part is sliced.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The slicing frame of a belt object started at its lowest vertex, but the
belt under the leading end of an overhang lies below that, by the
overhang's length times the tilt's shear. Every support generator works
in layers at z >= 0, so none of them could reach it: normal supports
stopped at the object's own lowest layer, and the two tree generators
each carried a stack of hacks to extend themselves below it (a post-hoc
copy of the lowest base area in TreeSupport, "virtual belt raft layers"
in TreeSupport3D/TreeModelVolumes), sized from the pre-rotation bbox
and capped at global z = 0, which is only right for the trailing half
of the belt.
Start the frame at the lowest belt-floor point under the footprint
instead, less a 10 mm margin along the belt for the base of a support
column (BeltSliceStrategy::apply_preslice_transforms and
BeltTransformPipeline::compute_belt_height_and_floor agree on it). The
layers between it and the first vertex come out empty, which belt
slicing already tolerates, and the generators need no extension at all:
- normal supports: the generator anchors its layer grid at the frame
origin, so run it in the object frame and shift the global belt Z
offset onto the result afterwards, as organic supports already did.
With the offset on the object layers a top contact at negative z
turned the intermediate-layer count negative and the generator
allocated layers until the kernel killed it (any overhang in the
leading half of the belt). Drop the first-layer flange expansion on a
belt: the first support layer is the leading tip of the support, not
a flange, and inflating it put lines in the air ahead of the belt.
- classic tree: a node now keeps dropping until its whole circle is in
the belt, so the branch tapers to a tip on the belt instead of
stopping, a radius above it, when its centre crosses.
- organic: the belt is no longer a support blocker. A blocker is a
collision, and a branch descending onto one slides off it, down the
tilted belt and ahead of the part; the belt is where branches end,
which the per-layer m_belt_floor clipping already does.
The belt brim is generated after the parallel support step instead of
inside it: belt_brim_obstacles() reads every object's layers and support
layers, which another object's support step rebuilds (and, now, shifts)
at the same time. This is the race behind the Windows arm64 segfault
in "Belt brim of each object precedes its perimeters on its own
filament".
Also: the belt tilt axis moves to Developer mode as its own row (a
shared line is shown by its first option's mode), first_layer_plane
band thickness, belt_support_floor_mode, belt_preslice_global and
gcode_back_transform are retired and presumed on, the gravity arrow is
a plain line along the up direction, and the "Show raw G-code (belt
only)" preview toggle is gone.
Regression test: "Belt supports reach the belt under a leading
overhang" slices a cube with a fin whose underside is parallel to the
layers, 20 mm ahead of the cube and up to 41 mm of slicing Z above the
belt, for normal, organic and classic tree supports, and checks that
the lowest support layer sits on the belt beneath its own lines.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Removed, with the keys added to handle_legacy()'s ignore list so saved
profiles and 3MFs keep loading:
- belt_slice_rotation_global and preslice_remap_global. Both were only
consulted when belt_preslice_global ("Global mesh transforms") was off,
which no profile does; belt_preslice_global is now the single global
mode and is presumed on everywhere the old flags were ORed in
(PrintObjectSlice, BeltBackTransform, BeltGCode, Print::process,
PrintApply). The Belt tilt row is axis + angle only.
- preslice_remap_x/y/z. No profile used the pre-slice axis remap; the belt
tilt axis plus the G-code axis remap cover the machines that exist, and
its implementation only agreed with itself for a plain swap (matrix
columns vs remap_bbox rows). BeltTransformPipeline::build_preslice_remap,
remap_bbox and has_preslice_remap are gone, the forward transform is the
rotation, and the G-code header no longer carries the remap.
- belt_support_z_offset_mode. Saved and invalidated steps, but no support
generator read it.
- first_layer_plane and first_layer_plane_offset, with FirstLayerPlane.cpp.
On every shipped configuration the band is measured from the belt
surface (GCode::belt_height_above_floor) and the evaluator was only
reached for an explicit XY/YZ/XZ choice or a non-zero offset, which
nobody set. first_layer_plane_thickness stays as the band unit,
relabelled "First layer band thickness".
UI: the Machine frame transforms group is five single-option rows (G-code
remap X / Y / Z, Decouple machine-frame tilt, Machine-frame tilt angle;
the angle row is shown only when decoupled) instead of two multi-column
lines, and the remap fields carry full labels.
Also carries the phong.fs struct fix from #16226 so the worktree build
links its shaders.
libslic3r_tests and fff_print_tests pass; clang-tidy diff check clean;
orca_profile_tool.py check clean.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
