The band was a second pass over the finished layer that fought the fan commands
the layer pass had already written (overhang, bridge and resume requests). The
generator now marks where each segment enters and leaves the band and the layer
pass treats the band as the strongest fan request, so there is one place that
decides the fan.
The purge plan moves objects onto a common layer grid after the brim bands are
built, so the two cannot share a print. The prime tower setting alone still does
not block a brim. The missing-prism warning now counts the filaments the objects
use, as the GUI does.
* Keep User Preset Values on Extruder Variants They Don't List
A user preset stores the variant list its parent had when it was saved.
When the parent later gains variants, update_diff_values_to_child_config
matched variants by name only and left the new ones at the parent's
value, so the user's settings were silently replaced there, and a
re-save wrote the system values into the user's file.
An unmatched parent variant now takes the child's first variant of the
same extruder, the rule slicing already uses in get_config_index_base.
A child without a variant list covers the parent's first extruder. The
name match also no longer indexes the child's extruder ids when it has
none.
* Share One Variant Column Rule Between Slicing, User Presets and Projects
Three places chose which variant column a value comes from, each with
its own copy of "the same variant and owner, else the owner's first
column": get_config_index_base when slicing, the user preset merge in
update_diff_values_to_child_config, and normalize_filament_values_to_variants
for projects and the CLI.
find_variant_column now holds that rule and map_variant_columns applies
it to a variant list, so a change to how missing variants are filled
reaches all three. Each caller keeps its own copy step. There is no
behaviour change: G-code is identical before and after. The one
relaxation is that get_config_index_base no longer reads past a short
id list when its two lists differ in length, which its assert already
rules out.
* Rename variant column helpers to variant index
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Make Painted Multi-Material Slicing Deterministic
Painted (multi-material) models sliced to slightly different G-code on
every run: ±1 µm wall coordinates and reordered islands. Hashing each stage
of the segmentation across runs showed the projected painted lines and the
per-layer Voronoi segmentation were stable; the raw top/bottom projections
from slice_mesh_slabs() were not. Three causes, all thread-order dependent:
- slice_slabs_make_lines() appends each slab's intersection lines from a
parallel facet loop and never restored a canonical order, so the loop
start vertices and polygon order from make_slab_loops() depended on
scheduling. Sort every slab's lines with the same key slice_make_lines()
already uses.
- segmentation_top_and_bottom_layers() wrote a layer's shell projections
into neighbouring layers' vectors from the parallel loop, relying on a
parity double-buffer that assumes TBB ranges are exactly one group wide
and aligned, which blocked_range does not guarantee; two threads could
append to the same vector. Each source layer now records its projections
in its own slot and they are gathered per target layer in source order.
- The painted-line sort in post_process_painted_lines() was not a total
order: projections of one span from facets of different colours tied on
every key and the first one won the span. Colour and end points now break
the tie.
Three multi-threaded runs of each painted fixture now give one G-code;
unpainted output is unchanged.
* Test That Slab Slicing Does Not Depend on the Thread Schedule
Projects a dense, tilted sphere with slice_mesh_slabs() on one thread and
then three times multi-threaded, and requires the polygons to match exactly,
vertex order included. Fails without the canonical line sort, passes with it.
A tilted layer runs from the belt to the top of the part, so a wall loop
that starts above the belt still passes along it. Tagging only the path's
first point left such loops out of the band entirely; the band is now
evaluated at each segment, with the tag capped where the fan stops
depending on it.
* Add Missing Includes Across src/slic3r/GUI
Every GUI source and header now directly includes the headers declaring what it uses, rather than relying on the precompiled header or transitive includes. Generated with clang-tidy misc-include-cleaner, plus one hand edit making CalibrationPanel.hpp self-contained.
* Drop the OS-Specific Includes Added Outside Their Platform Guards
GLib, GTK, D-Bus and POSIX headers are only used inside platform #if blocks, which already include them. Added unconditionally at the top of the file they broke the Windows build.
* Add the clang-tidy Configuration That Generated These Includes
Only misc-include-cleaner's missing-include check, with the headers it must never suggest: per-platform, internal and OS-specific ones that would break other platforms or are not meant to be included directly.
* Match Windows Paths in the clang-tidy Ignore List
Header paths use backslashes on Windows, so every / in a pattern is now [/\\]. The Windows SDK headers are ignored alongside the other OS-specific ones, and the list is one pattern per line. Suggested by @raistlin7447 from a Windows clang-cl run.
With a first layer of about 0.28 mm or more at 45 degrees (or a shallower
belt) the brim band is wider than one bead and its lines go on the nominal
lattice. A lattice line could land where the belt is almost at the band's
print_z; its flow was clamped to half a layer while the nozzle sat nearly on
the belt. Such a line now moves uphill to the 0.75 fraction the single-line
case uses, and a line that lands on the previous one is skipped.
Ported from the Unlayered fork (patch 0007 of its belt port series, found
there by fuzzing first layer heights). The fork's companion fix, restricting
the brim filament to those the writer was handed (0008), is not needed here:
ToolOrdering registers the brim filament on every band's layer, so the writer
always has it. A test pins that with every object a flush target.
EXCLUDE_OBJECT_DEFINE keeps plate coordinates on a belt printer: the frame
after the slicing rotation is undone and before the G-code axis remap and
machine-frame shear, which is where the object stands on the belt.
Raised in Hanif Koh's review of #14394.
The purge tower is a model object the GUI creates and sizes, and libslic3r
only purges into one that exists. A multi-filament belt project sliced from
the CLI without it changed filament with nowhere to purge, silently.
Raised in Hanif Koh's review of #14394.
The cooling buffer's band pass rebuilt positions from the layer's G-code
and tested them against the first-layer plane. The G-code is in machine
coordinates and the plane is in slicing coordinates, so on the shipped
profiles the nearest move was over 100 mm from a 0.2 mm band and the pass
never changed the fan. GCode::_extrude() already knows each path's height
above the belt, so it now tags the band changes and the buffer applies and
strips the tags.
The pass also took the S of every M106 as the part fan, whatever its P
index, and stored that 0..255 value where a percentage was expected (an
auxiliary fan line came back as M106 S651); it now uses FanMover's parser,
which ignores other fans, and converts to percent. It no longer overwrites
the layer's intended speed, only the fan's actual state.
Raised in Hanif Koh's review of #14394.
belt_brim_instances_compatible() runs while the slicing parameters can be
stale, like the rest of the brim predicates, which read the print config.
Raised in Hanif Koh's review of #14394.
Apron bands looked up their filament and nozzle config slot with a running
counter, while object layers use Layer::id(), so band N read the map of
object layer N. They precede layer 0 and now use its assignment.
Raised in Hanif Koh's review of #14394.
The mesh transform is a rotation and an axis permutation, so its
determinant is always 1; rebuilding the forward transform on every
extrusion to divide the flow by it changed nothing.
Raised in Hanif Koh's review of #14394.
enable_prime_tower stays on for any multi-filament project, but a belt
printer never prints the classic tower and the belt purge prism is an
ordinary object that never takes a brim, so every brim on a multi-filament
belt print was refused for nothing.
Raised in Hanif Koh's review of #14394.
validate() skipped the build-volume height check whenever the machine-frame
transform was active, which is every shipped belt profile, so a 400 mm
object passed on a 300 mm printable_height. The transform only changes how
the height is written to G-code; the clearance check from f682ab5cd3
applies regardless.
Raised in Hanif Koh's review of #14394.
Drops the [BELT-DEBUG], [BELTRACE], [BELT-CALIB] and [BELT-PREVIEW] log
lines, the SLIC3R_BELT_DIAGNOSTIC_LOG blocks, and the counters and
temporaries that existed only to feed them. Six of the purge tower lines
logged at warning level, which is Orca's default, on every plan. Raised in
Hanif Koh's review of #14394.
preslice_remap_*, preslice_remap_global and gcode_remap_* describe the
printer's kinematics and are set once by its profile. A wrong value sends
the gantry outside the machine (a user preset with the pre-slice remap in
place of the G-code remap emitted gantry moves to Y=646 mm), so they are no
longer offered in Expert mode.
PartPlate's containment tests treat the plate as open along Y on a belt printer with
belt_printer_infinite_y, so a long part is no longer flagged outside the plate in Prepare
while the slicer and the G-code checks accept it. The check reads the printer preset
through the app object, which does not exist headlessly, so it is guarded on the plater.
The prism's generator already sets no_brim; PrintObject::has_belt_brim() now also ignores
any brim setting on the prism (belt_purge_tower_object), so a brim on the parts beside it
never blocks purging.
ToolOrdering::has_wipe_tower() reads the first layer's flag. On a belt the first layer may
be a brim apron band, which carries neither object nor support and never gets the flag, so
with a brim the purge plan returned early and nothing was purged. Scan the layers for a
change.
With top_shell_layers = 0 the `top` vector is never filled and erasing its begin() was
undefined (found by fuzzing on a painted object dropped below the plate).
The per-filament island tour was cached by island centroids only. A later layer with the
same centroids but fewer islands (thin walls, negative volumes) reused the stale visit
list, whose catch-all index pointed past the layer's islands, and extrude_perimeters read
freed memory (three fuzz crashes, planar and belt). The per-instance island layout is part
of the cache key and the use site never indexes past the islands.
Found by fuzzing the headless slicer:
- A BBS-style 3MF without Metadata/project_settings.config segfaulted the CLI silently on
the missing printable_height option.
- A project saved with fewer filaments (or filament groups) than --load-filaments overran
the filament variant tables (segfault in the variant match) and then hit an uncaught
ConfigurationError from set_with_restore_2 (std::terminate). The tables are regenerated
for the filaments the project did not know about, the destination vectors grown first
(only from a non-empty source), the match bounded, and a failure becomes a CLI config
error.
A 3MF vertex with a nan/inf coordinate was accepted by both parsers and crashed qhull in
ModelVolume's convex hull while the file was still loading. Both vertex handlers refuse it,
and volume generation checks again whichever parser produced the geometry. The main
parser's _stop_object_xml_parser keeps a message a handler already set.
Felix14-v2's review of OrcaSlicer#16019 found the tab behaving as a world of its own.
- Icons: the design_* glyphs were drawn in a fixed light grey, made for the dark ribbon, and the
toolbar re-tinted some of them by rebuilding the bitmap from a wxImage, which drops the HiDPI
scale factor Orca sets on Windows: at 150 % the icons came out half again too large for buttons
that were sized in raw pixels, overlapping and clipped. The glyphs now use Orca's sidebar icon
grey (#949494), which the icon cache maps per theme, nothing is re-tinted, toolbar glyphs drawn
for Prepare's light toolbar use their "_dark" twin, and every size is in DIP.
- Theme: the chrome colours were read once, at construction, and nothing in the tab answered a
theme switch, so switching left light surfaces and unreadable text in a dark tab and the other
way round. The colours are now {light, dark} token pairs; MainFrame::on_sys_color_changed
reaches DesignPanel::on_sys_color_changed, which moves every token colour onto the other
theme's, runs the app's dark pass and re-rasterises the icons. Card borders are StateColors,
resolved at paint time.
- Scale: MainFrame::on_dpi_changed reaches DesignPanel::msw_rescale, which re-rasterises every
icon (buttons, flyout rows, card headers, the tree's image list, now sized from its bitmaps)
and re-measures the Orca widgets.
- Mouse: the canvas no longer forces middle-drag to orbit and right-drag to pan; it reads the
drag actions in Preferences > Control like Prepare. Left-drag is shared with picking, so the
whole-body rubber band takes Shift+left-drag while left-drag is given to the camera.
- FPS counter: ImGui's display size is shared and only refreshed when a canvas sees its own
size change; the Design canvas now re-announces its size when the tab is entered (and the
editor canvas when it is left), as Plater does between Prepare and Preview.
- Viewport text: the status line and the tool readout were top-level popups over GL. A popup
does not follow its frame, so the empty-canvas hint floated over other applications, and the
readout was never taken down with the tab. Both are drawn by the canvas in the tool's ImGui
pass now, with the theme's overlay style.
- Dialogs: messages use MessageDialog/RichMessageDialog; Add/Edit Variable is one Orca dialog
with Name and Expression fields instead of two native text prompts; the Text dialog uses
TextInput, ComboBox and CheckBox (its height is a TextInput: SpinInput is integer-only), and
enumerates the installed fonts once per session. The ribbon's Confirm/Cancel, the reference
pick buttons and the expression buttons are Orca Buttons; the variable actions are icon
buttons like the other cards'.
- Undo: the tab's own Undo/Redo buttons are gone. The top bar's Undo/Redo drive the Design
history while the tab is shown, greyed to what an undo would do, as Ctrl+Z and Edit already
did.
- The first build of the tab logs how long each phase took ("Design tab build: ..."): it is
under a second here but was reported at about fifteen on Windows.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QK4VgguuCAk2hZLWgcjJb9
* Lock Config and Preset Files Across Instances and Write Them Atomically
Every running instance shares one OrcaSlicer.conf and one user preset
tree, and nothing kept their writers apart. Two instances saving at the
same moment, or the cloud preset sync thread writing while the GUI thread
saved, could interleave, and a reader in another instance could open a
preset JSON or .info file between truncate and close and get a partial
file, dropping that preset for the session with a parse error.
Add InstanceLock, a scoped guard that serialises the threads of one
process through a recursive mutex and other processes through an advisory
OS file lock: flock on POSIX, held on the guard's own descriptor so no
other close in the process can drop it, and LockFileEx on Windows. The
outermost guard opens the lock file and closes it on release, so nothing
stays open between saves and a data dir can be removed once nothing is
saving into it; the file itself is kept, since deleting it would let a
third instance lock a fresh file while the second still holds the old
one. It is best effort: when the lock file cannot be opened or locked, or
another instance still holds it after a second, the guard logs once and
lets the write proceed, then leaves the file alone for ten seconds, so a
hung instance never blocks every other one and a holder stuck in a
debugger does not cost a stall per save. The guard sits at the leaf
readers and writers: set_sync_info_and_save() calls save_info() under the
preset collection mutex, so a batch lock around save_user_presets() would
invert the order against the sync thread. The user preset scan reads its
files on worker threads without the guard, since the mutex would
serialise them, and takes it per file in the serial commit step, so a
save never waits for the whole scan. Each read keeps the bytes of the
preset and its .info as they were before parsing; commit compares them
with the disk under the guard and reads a file that changed again, so it
never deletes or writes back over another instance's newer save, nor
installs a .json and .info from two different saves; a preset another
instance removed in the meantime is not installed. Without the guard, in
a cool-down, the scan still loads the presets but leaves their files
alone: an unreadable file stays for the next scan, and a derived
compatible printer is not written back. Read-only scans, which is what
the CLI does, take no lock and create no lock file.
AppConfig holds OrcaSlicer.conf.lock in load() and save(); load is
included because the Windows path restores from the .bak copy. Every
user preset writer and reader holds user.lock: Preset::save(), which
writes no .info when the preset itself could not be written, since an
.info without its preset reads as a cloud deletion request, save_info(),
reload() and remove_files(), each preset the scan commits, the
bundle metadata reads and write, the .info removal after a cloud-confirmed
delete, the orphaned-.info scan on the sync thread, the bundle folder
removal on unsubscribe and the physical printer writers and delete
paths. A bundle import extracts under cache/ into a folder per process
and per import, where no scan reads.
Preset JSON, .info, bundle metadata, physical printer and config files,
and the caches and state files that already used a temporary by hand,
now go through write_file_atomically(), which writes <file>.<pid>.<n>.tmp
beside the target and renames it over, so a reader that never waits sees
a complete old or new file. A symlink is followed; a target that is not
a regular file is written in place; and when no temporary can be created
beside an existing target, or the rename itself is refused, by a Windows
reader holding the file open or a mount that cannot replace in one step,
the helper writes in place as before, since losing the save is worse
than a torn read. On POSIX the rename replaces the
target atomically where the old code removed it first and left a window
with no file at all; only a mount that refuses a one-step replace gets
the old remove-then-rename. A crash between temporary and rename leaves
the temporary behind, which no scan reads. Preset::save() returns
whether it wrote the preset, so the scan counts a compatible printer it
could not write back as an error. A failed config write keeps
the config dirty, and the idle handler waits ten seconds before retrying
while an explicit save always tries.
* Run the Cross-Process Lock Test on Every Platform
The test that checks the guard yields to a lock held elsewhere forked a
child to hold it, so it was left out on Windows. The OS lock belongs to
the handle on Windows and to the open file description elsewhere, so a
second handle in the same process is refused like another instance
would be. The test now holds the lock that way and runs everywhere.
extrude_infill() and extrude_support() reversed the layer's extrusion
entities in place while chaining them, so each export started from the
previous one's reversed toolpaths, and each copy of an object from the
copy before it. The export-time region lists now hold const pointers,
and chaining reverses a clone instead.
An ironing line spacing of 0 reached the fillers from a 3MF, the CLI or
the per-filament override, which has no GUI guard. Concentric ironing
then never finished slicing, because a zero inset never shrinks the
region, and rectilinear ironing was silently dropped. Tiny positive
values produced an unprintable number of lines.
Top surface and support ironing now clamp the spacing to the 0.05 mm
floor the process GUI guard already enforces, so these configurations
iron at that spacing. Spacings at or above the floor, including every
shipped profile, are unchanged. The concentric filler also returns early
on a non-positive step so no other caller can hang it, and the filament
settings page now resets a too-small override the same way the process
page does.
With stealth mode off the home page asks for the login status every 2 s,
and while nobody is logged in that ends in clear_user_secret(), which
opened the system keychain and deleted the OrcaSlicer/Auth entry on the
UI thread every tick. A working keychain cost a D-Bus round trip per tick;
a keychain that never answers blocked the UI for 25 s per tick. It also
deleted a login another running instance had just saved, and ignored
use_encrypted_token_file, so opting out of the keychain did not help.
Remember whether this process read a secret from the store or wrote one,
and only then touch the store when a logged-out poll asks for a logout.
A logged-out instance never touches the keychain, and in encrypted-file
mode the poll no longer opens the keychain at all. A secret this process
cannot read, such as a token file encrypted for another OS user sharing
the data directory, is left alone by the poll. An explicit logout still
wipes both backends, so a token stranded by switching the token storage
option cannot sign the account back in later.
# Description
Include variant-aware validation, temperature and pressure controls,
named nozzle selection, and filament sidebar refresh.
## Support nozzle-specific filament cooling and tuning
Filament presets can require different cooling and tuning for Standard
and High Flow nozzle variants. This change makes part and auxiliary
cooling, pressure advance, temperature limits, and multitool ramming
settings follow the selected variant, with matching UI controls and
profile validation.
The Snapmaker U1 profiles in #15755 / Snorca illustrate why this
matters:
| Profile | Standard cooling | High Flow cooling |
|---|---|---|
| Snapmaker ABS | Part fan: 15–15% | Part fan: 10–60% |
| Snapmaker PETG HF, 0.4 mm | Part fan: 20–40% | Part fan: 30–60% |
| Snapmaker PETG-CF | Part fan: 0–20%; auxiliary: 0% | Part fan: 5–40%;
auxiliary: 20% |
| Snapmaker PLA Matte | Auxiliary: 80% | Auxiliary: 100% |
These differences need to survive variant selection, editing, and
slicing. Shared single values continue to apply across variants, and
short filament arrays fall back to element zero, matching the loader.
### Additional changes
- Preserve named nozzle selections when refreshing the diameter
selector.
- Enable or disable the pressure-advance input for the selected variant.
- Initialize profile-validation slicing with the printer’s declared
nozzle volume type.
- Refresh filament controls after preset loading.
Profile changes remain separate in `u1-hf`.
### Validation
- All 13 focused variant-tool tests passed.
- Broader checks encountered an existing Windows path-separator
assertion failure, reproduced with upstream code.
- C++ build and GUI validation have not been run.
[How to Download Pull Requests Artifacts for
Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
## Summary
Adds a new paint-style **Texture Displacement** gizmo that stamps
grayscale
height-map textures onto a model's surface and turns them into real
relief -
engraved or embossed detail - either as a live preview or baked into
actual mesh
geometry.
You paint where a texture applies, stack up to **8 blended texture
layers**
(image-editor semantics: Add / Subtract / Multiply / Divide), choose how
each is
projected onto the surface (Triplanar / Cylindrical / Spherical / LSCM
unwrap /
From-view), and - for the LSCM projection - lay the charts out by hand
in a new
dockable 2D **UV Editor** pane. Coarse models can be **Subdivided** or
**Remeshed** first so there are enough vertices to carry fine detail,
and the
result is committed with **Bake**, restricted to the painted area only.
The tool only ever affects the **painted** region; everything left
unpainted
keeps its original surface, and bake blends the relief seamlessly into
it with no
remeshing or hole-filling at the seam.
---
## User-facing features
- **Paint the affected area** with Brush (circle/sphere), single-Face,
or
Connected-area flood fill; or **Select whole model** - reusing the
existing
`TriangleSelector` / `FacetsAnnotation` painting machinery, one full
mask per
layer slot.
- **Up to 8 texture layers**, each with its own paint mask, texture, and
parameters, combined in slot order like image layers.
- **Per-layer controls:** Depth, Tile size, Rotation, Midlevel
(bidirectional
emboss/engrave), Smoothing, Edge smoothing, Invert, Blend mode, Tile
(Repeat / Mirrored-repeat / decal), and Projection.
- **Projection methods:** Triplanar (blended, seam-free across sharp
edges),
Cylindrical, Spherical, **Unwrap (LSCM)** - a real CGAL conformal
parameterization - and **From view** (slide-projector decals).
- **UV Editor pane** for LSCM layers: move / rotate / scale / snap / cut
/ join
islands, average texel density, Checker and Distortion overlays, manual
mark-
seam workflow, live model update while dragging.
- **View modes:** Normal (true displaced geometry = what Bake produces),
Fast
(GPU bump-shaded approximation of the active layer), Checker, Distortion
heatmap, and an independent Wireframe toggle.
- **Mesh prep:** Subdivide (1–5* uniform 1->4 split) with cyan-wireframe
preview,
and CGAL isotropic **Remesh** to a target edge length.
- **Texture library:** 10 shipped seamless 512×512 grayscale height
maps, plus
import of any PNG/JPG/BMP (converted to an 8-bit grayscale map and
copied into
the user data dir so app updates can't clobber it).
- **Bake** runs in the background (off the UI thread); the preview is
free to
explore and only Bake changes the real mesh.
---
## How it works (implementation)
- **Bake is accumulate-then-displace and topology-preserving.** The
output mesh
has exactly the input's vertices and triangles in the same order; only
displaced vertex positions differ. Each layer is evaluated against the
**base
mesh** and folded per-vertex into a shared accumulator via its blend
mode, then
every touched vertex moves once along its precomputed undisplaced
normal. This
replaced an earlier sequential re-mesh-per-layer design that was the
root cause
of the "second layer never applies" bug and made blend modes impossible.
- **Boundary vertices are pinned.** Any vertex shared with an unpainted
triangle
is never displaced, which is what keeps bakes seamless with zero
remeshing.
- **LSCM unwrap** uses a new `MeshBoolean::cgal::parameterize_lscm()`
built on
CGAL's already-vendored `Surface_mesh_parameterization` package - **no
new
external dependency**.
- **Fast GPU preview** perturbs the shading normal from the height
gradient
(analytic mm-per-mm slope for triplanar; Mikkelsen's
screen-space-derivative
method for the conformal LSCM path), so apparent depth matches the bake.
- **Background jobs:** preview compute and bake both run off the UI
thread on the
shared job worker (queued, not `replace_job`, so a preview never cancels
an
in-flight bake); a generation counter discards stale results.
- **UV Editor** shares the app's single real `wxGLContext` and reuses
the
registered `flat`/`flat_texture` shaders; island drags update one affine
matrix
per island rather than re-uploading geometry.
---
## Backward compatibility & constraints
- **Feature is fully gated behind the new gizmo** - it adds no new
default
behavior and does not touch existing slicing, profiles, or defaults.
Models
that never open the tool are unaffected.
- **Cross-platform** - pure `libslic3r` / `libslic3r_gui` /
`libslic3r_cgal`
code; no new dependency and no `deps/` rebuild. (Built and tested on
Windows;
no platform-specific APIs introduced.)
- **`.3mf` compatibility:** **baked** relief round-trips fine, since it
becomes
ordinary mesh geometry via the existing serialization path. **Unbaked**
paint
masks and layer definitions are **not yet serialized** - see
Limitations. No
existing project data is affected.
---
## Testing
Unit tests in `tests/libslic3r/test_texture_displacement.cpp` - **run
and
passing** (7 cases, 116 assertions). Coverage:
- `decode_height_texture` round-trip
- Empty-layer no-op
- Full-cube uniform displacement
- Boundary-vertex pinning on a hand-built fan mesh
- Regression: a **second layer over the same area actually contributes**
(the
bug the bake rewrite fixed)
- Table-driven check of all four blend modes
- The lowest painted layer ignoring its blend mode
`BUILD_TESTS` is `OFF` in the checked-in cache; enable to run:
```bash
cmake -S . -B build -DBUILD_TESTS=ON
cmake --build build --config Release --target libslic3r_tests -- -m
./build/tests/libslic3r/Release/libslic3r_tests.exe "[TextureDisplacement]" --order rand
```
---
Kiss Lorand