Update perimeter traversal to pass each extrusion's closed/open state into `apply_fuzzy_skin`. This lets fuzzy skin logic distinguish contours from closed loops when processing perimeters.
Co-authored-by: Rodrigo Faselli <162915171+RF47@users.noreply.github.com>
Call update_dynamic_filament_list() alongside update_mixed_filament_list() in two places: after editing a mixed filament slot and when the filament count doesn't change (e.g., adding a mixed/virtual slot). This ensures per-feature filament lists reflect the updated blended colour and type without requiring a full filament count change.
* Skip straight-run splits in corner smoothing
Teach `CornerSmoother` to treat vertices that only continue a straight segment as part of the same leg instead of rounding them as corners. The smoother now keeps a three-point window so it can emit a corner only once both adjoining legs are known, which avoids unnecessary corner processing while preserving real turns such as hairpins.
* Add regression test for split-leg smoothing
Adds a FillCornerSmoothing regression test covering polylines with an extra collinear vertex in a straight run. The test ensures corner smoothing treats split and unsplit geometry identically, preventing inconsistent rounding radii in triangular/grid infill paths.
Adds a new "Length" row to the sequential marker position popup in GCodeViewer and updates row capacity accordingly.
For arc commands (G2/G3) that are split into multiple vertices, it now sums segment distances across vertices with the same gcode_id so the displayed value reflects the full move length instead of a single chord.
Introduced a shared `colinear_vertex_tolerance()` helper in `ExtrusionLine.hpp` and updated both simplify paths (`ExtrusionLine.cpp` and `WallToolPaths.cpp`) to use it instead of duplicated hardcoded `0.005` scaled thresholds. This keeps the near-colinear early-out tied to `SCALED_EPSILON` (rounding-noise scale) and avoids unintended curve decimation from larger tolerances, while documenting the geometric impact in code.
* Normalize the junction direction vector over XYZE
calc_vmax_junction_deviation() treats the dot product of two jd_unit_vec as a
cosine, but the vectors were scaled by 1 / block.distance, which is the XYZ
length. On an extruding move the E component then pushes the 4D norm above 1 and
the dot product below -1, so the corner reads as straighter than it is and is
planned too fast -- the more so the higher the flow. Measured on a 6 degree
corner at scv 5: 86.9mm/s with no extrusion, 94.4mm/s at 0.029mm/mm, 150.0mm/s
at 0.1mm/mm.
Neither firmware does that. Marlin normalizes over XYZE for any extruding move
(planner.cpp: `if (... || esteps > 0) normalize_junction_vector(unit_vec)`) and
Klipper leaves E out of the cosine entirely, dotting only axes_r[0..2]
(toolhead.py::Move.calc_junction). Normalizing satisfies both: with E normalized
in, the cosine differs from the XYZ-only one by ~1e-5 at printing flow rates.
This is a deliberate divergence from PrusaSlicer, which still scales by
1 / distance -- it carries an older Marlin's behaviour.
Travel moves are unaffected, their vector was already unit length.
Reported by Copilot in review of #15304.
* Test that extrusion rate does not change corner planning
The junction deviation tests were all travel-only, which is exactly why the E
component of the junction vector went unchecked. Cover it: the same corner has
to be planned the same whether nothing, an ordinary 0.42 x 0.2 line, or a fat
large-nozzle line is extruded through it, on both Klipper and Marlin 2.
Reported by Copilot in review of #15304.
* Plan corners with junction deviation where the firmware uses it
The time estimator only ever had the classic per-axis jerk model, which limits a
corner by the largest single-axis component of the velocity change. That is
anisotropic: the same corner is allowed sqrt(2) more speed on a diagonal than on
an axis, which paints a four-lobed ripple around every circular wall in the
actual speed and actual flow views, worst on small parts whose walls are made of
short segments.
Klipper has no classic jerk at all and Marlin 2 has none while M205 J is in use;
both plan corners with junction deviation, which sees only the corner angle. Add
that model and use it for those machines:
- Klipper: derived from the square corner velocity, as the firmware does
(jd = scv^2 * (sqrt(2) - 1) / max_accel), reading the scv from
machine_max_jerk_x, where process_SET_VELOCITY_LIMIT() already stores
SQUARE_CORNER_VELOCITY.
- Marlin 2: machine_max_junction_deviation, which was already loaded into the
machine limits but never reached the planner.
- Every other flavor keeps the classic jerk path unchanged.
The model has no per-axis jerk floor, so this also drops the hard slow spot the
estimator drew at the start of every loop from machine_max_jerk_e.
Toolpaths are unaffected: on a full export the only lines that change are M73.
The junction deviation maths, including Marlin's JD_HANDLE_SMALL_SEGMENTS arc
approximation, is ported from PrusaSlicer's src/libslic3r/GCode/GCodeProcessor.cpp.
The Klipper mapping is not in PrusaSlicer, which ignores SET_VELOCITY_LIMIT.
* Add tests for junction deviation corner planning
Cover the three properties the change rests on:
- a right angle on Klipper is planned at exactly the square corner velocity,
the identity that makes the scv to junction deviation mapping correct, and a
shallow corner is planned far faster than per-axis jerk allows;
- junction deviation gives the same speed whatever the corner's orientation,
while classic jerk keeps its sqrt(2) spread, which is the four-lobed ripple;
- machines that do not plan with junction deviation are provably untouched,
including a Marlin 2 printer that has it disabled.
* Support 'Default' filament option (index 0)
Treat filament index 0 as the new "Default" (use active object/part filament) instead of using 1. Update config defaults and tooltips for wall/sparse/solid infill filament options (min/default -> 0, tooltip explains "Default"). Adjust normalization and propagation logic to respect explicit feature overrides and only apply base extruder when feature values are zero; only copy sparse->solid infill when sparse > 0. Introduce FeatureFilamentOverrideMask and clamp_feature_filament_to_valid to resolve and clamp feature filaments. Update UI lists and selection behavior to expose a "Default" entry and handle zero-based indices in PartPlate and Plater.
* enable_filament_for_features option
Co-Authored-By: LixNix <105106115+lixnix@users.noreply.github.com>
* \n
* Allow wipe_tower_filament to equal nozzle count
Relax the assertion in Print::extruders to permit wipe_tower_filament == config().nozzle_diameter.size(). The configuration value is 1-based and the code subtracts 1 when pushing the extruder index, so equality should be valid and selecting the last nozzle should not trigger an assertion.
* Revert "Allow wipe_tower_filament to equal nozzle count"
This reverts commit 2c976574327a8bcdc74a1b296bf1aaff7752a94e.
* Revert "enable_filament_for_features option"
This reverts commit 01c13baeddb8e26793f752deab788ee4d086975b.
* Migrate legacy feature filament defaults
Add migration logic to convert legacy feature filament selections from 1 to 0 for older 3mf files. Introduces a local migrate_legacy_feature_filament_defaults lambda in src/OrcaSlicer.cpp and src/slic3r/GUI/Plater.cpp that scans keys (wall_filament, sparse_infill_filament, solid_infill_filament, support_filament, support_interface_filament) on configs/objects/volumes, updates values, counts conversions and logs the result. Also adds a Semver check for "2.4.0-dev" in OrcaSlicer to trigger the migration for files older than that version. This preserves expected default filament selections when loading older project files.
* Update OrcaSlicer.cpp
* Extract migration helper to ConfigMigrations
Centralize legacy feature-filament default migration by moving the duplicated lambda into ConfigMigrations::migrate_legacy_feature_filament_defaults (src/libslic3r/Config.cpp) and declaring it in Config.hpp. Update OrcaSlicer.cpp and slic3r/GUI/Plater.cpp to call the new function instead of inline lambdas. The helper converts specific feature filament keys (wall_filament, sparse_infill_filament, solid_infill_filament, support_filament, support_interface_filament) from int 1 to 0 and returns the count of conversions to avoid duplicated migration logic.
* Remove DynamicFilamentList1Based and consolidate lists
Delete the specialized DynamicFilamentList1Based struct and its global instance. Update Choice registrations to use the single dynamic_filament_list for wall, sparse_infill and solid_infill filaments, and remove the extra update call for the removed instance. This consolidates filament choice handling and removes duplicated logic in Plater.cpp.
* move it
* fix objects
* Update Config.hpp
* Update profiles
* feat(viewer): Display travel distance and move count in G-code summary
This commit introduces a new feature that enhances the G-code viewer by displaying the total travel distance and the total number of travel moves in the 'Line Type' summary.
This provides users with more detailed statistics about their prints, helping them to better understand the printer's behavior and identify opportunities to optimize travel moves for faster print times.
This commit also fixes a critical bug in the G-code processor where the travel distance was being calculated incorrectly. The distance variable was not being updated for non-extruding travel moves, leading to inaccurate statistics. The calculation has been corrected to ensure it is performed for all relevant move types, resulting in accurate travel distance reporting.
* Subfix segments
kilo mega giga tera peta exa
* Add missing values
* Grams to Kilos and tons
* add distance
* Fix tool view
* Record and display seam distances
Track seam-related distances in print statistics and show them in the GCode viewer. Added total_seam_gap_distance and total_seam_scarf_distance to PrintEstimatedStatistics (with initialization). In GCode::extrude_loop the code now computes seam gap and scarf distances and accumulates them for external perimeters. GCodeViewer uses the summed seam distance when the Seams option is selected in the legend.
* Fix travel / wipe distances
* Update GCode.cpp
* Filament changes estimated time
---------
Co-authored-by: Steve Scargall <37674041+sscargal@users.noreply.github.com>
* Expose Antialiasing velues
Expose Antialiasing multipliers.
Default to 4 as current implementation but enables the user to disable it to improve performante or increase sampling to improve quality.
* FXAA
* Improve descriptions
* Require restart when MSAA setting changes
Detect changes to the OpenGL MSAA (multisample anti-aliasing) preference when opening Preferences and prompt the user to restart the application to apply the change. Adds a constant key for the MSAA setting, stores the previous value, checks for changes (similar to the existing FXAA handling), and shows a warning dialog explaining the restart will close the current project without saving. If the user accepts, recreate_GUI is invoked to apply the MSAA change immediately.
* Revert "Require restart when MSAA setting changes"
This reverts commit dde134d346c3849598c91d025d2faed1b51c8a22.
* Menu and FPS options
* Fix FPS limiter and remove VSYNC
* Grouped FPS settings and mode up rigth fps counter
---------
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
* Add tooltips to Transfer buttons
Set contextual tooltips for the Discard, Transfer and Save buttons when a dependent preset is present. The code computes the previous and new profile names and provides localized explanatory tooltips that clarify that switching will discard changes, transfer "New Value" settings, or save changes into the current profile. This improves UX by making the consequences of each action explicit.
* added some endlines
Co-Authored-By: yw4z <yw4z@outlook.com>
---------
Co-authored-by: yw4z <yw4z@outlook.com>
* Update fix model
* updated
* List missing files
* Orca Slicer to OrcaSlicer
* Revert "Orca Slicer to OrcaSlicer"
This reverts commit 711d796e05c4eaaa7579280f83f6ecd555fe3560.
* Only update date if a change was made
* Gcodewriter messages
* #13432 update
* Update OrcaSlicer_it.po
* Base IS Machine
* Toggle line
* Rebase
* Intento 1
* Wiki IS
* Flavorized
* Tooltips
* Calibration using the same list
* max
* Reorder JD validation
* Refactor set input shaping
* Calibrations IS
* Default values
* Axis
* Orca comments
* Rename input_shaping_enable to input_shaping_emit
Refactor all references of the input shaping configuration option from 'input_shaping_enable' to 'input_shaping_emit' across the codebase. This improves clarity by better reflecting the option's purpose of controlling whether input shaping commands are emitted in the generated G-code.
Restore DONT EMIT FOR KLIPPER
* Refactor input shaping option toggling logic
Simplifies and consolidates the logic for toggling input shaping related options in TabPrinter::toggle_options(). Uses a loop to handle enabling/disabling lines based on GCode flavor compatibility, and refines the conditions for toggling individual options.
* Improve input shaping option toggling logic in TabPrinter
* GrayOut Emit to gcode limits for klipper
* Typo
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
* Typo
* Skip Y input-shaper when type is Disable
If marlin2 and disabled it will be already disabled at X.
* IS expert
Co-Authored-By: SoftFever <softfeverever@gmail.com>
---------
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Make filament compatibility temperature-aware
Extend filament compatibility checks to consider actual nozzle temperatures and temperature ranges.
Print::check_multi_filaments_compatibility now accepts nozzle temperatures and range lows/highs; it resolves missing ranges from material defaults, computes per-filament effective temperatures, and checks pairwise compatibility (including high/low/mid mixed cases).
Updated callers in Print::check_multi_filament_valid and CalibrationWizardPresetPage to pass nozzle settings, consolidated user-facing warning strings, and fixed extruder index handling and minor logic/path improvements.
Clarify incompatible nozzle temperature warnings
* Update Print.cpp
* Remove json usage
* Reduce messages
Introduce an 'indentation_check' job step to .github/workflows/check_profiles.yml that validates profile JSON files under resources/profiles use tab-only indentation (1 tab per level). The step runs an inline Python check, emits a log (indentation_check.log) with errors and a fix tip, and exits non‑zero on violations. Workflow conditionals for preparing the PR comment artifact, uploading the artifact, and failing the job were updated to include the new step so indentation failures are reported alongside other profile validation failures.
Ian Bassi