Seven commits: painted multi-material segmentation made deterministic, missing
includes added across src/slic3r/GUI, U1 high-flow nozzle variants, Windows
ARM64 build and HTTPS fixes, and a rule added to the wxWidgets agent skill.
Three conflicts, all include lists: upstream's include pass and ours each added
to the same lists in GCodeViewer.hpp, PartPlate.hpp and PartPlate.cpp. Resolved
as the union of both. Three includes both sides had added at different places,
which git kept twice, are kept once: Color.hpp and <set> in PartPlate.cpp,
<sstream> in Plater.cpp.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The IMEX fixtures set seven nozzles but kept multifilament_config's single
filaments x filaments flush block. get_flush_volumes_matrix splits that block
across the nozzles, leaving each with 7 values, and
ToolOrdering::reorder_extruders_for_minimum_flush_volume then reads them as a
7 x 7 matrix, past the end of the buffer. One of the affected tests segfaulted
on Windows x64; ASan reproduces the overflow in that test on Linux, where it
passed only by luck.
The fixtures now repeat the block once per nozzle, as the GUI does, and size
flush_multiplier to match, since append_full_config takes the nozzle count from
it. The helper is shared in test_helpers.
Co-authored-by: HanifKoh <76276251+HanifKoh@users.noreply.github.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix: include bundled UV binary for arm64
* fix: update unit test CI
* Install unit-test numpy only with the bundled uv
* Simplify the unit-test script's uv lookup
---------
Co-authored-by: SoftFever <103989404+SoftFever@users.noreply.github.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
The ARM64 jobs pinned CMake 3.31 because CMake 4 dropped pre-3.5 policy
compatibility and its ARMASM support broke Boost.Context. Both are
handled now. deps/CMakeLists.txt sets CMAKE_POLICY_VERSION_MINIMUM on
CMake 4, and Boost.Context uses the winfib implementation on ARM64, so
nothing assembles with armasm.
CMake 3.31 also predates VS 2026. Its InstallRequiredSystemLibraries
treats the v145 toolset as v143, searches only the VS 2017-2022 install
directories and finds no runtime, so the ARM64 installer ships without
msvcp140.dll and vcruntime140.dll. CMake 4.2 and newer find the VC145
redistributable.
get-cmake also installs Ninja, so the ARM64 jobs now use its latest
release instead of the one already on the runner, as x64 does.
The install now fails when InstallRequiredSystemLibraries returns no
msvcp140.dll or vcruntime140.dll, after a configure warning naming the
CMake and MSVC versions. A CMake that predates the Visual Studio in use,
on a developer machine or after the next runner image update, then
stops the installer build instead of shipping one that cannot start.
The build_win.bat prerequisite installer drops its matching 3.31.8 pin.
This is the bulk of the profile changes for U1 that led to the cooling
catiant connection.
The ugly end gcode is used by the printer's UI to complain if normal
nozzle is installed but the file was sliced for highflow.
[How to Download Pull Requests Artifacts for
Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
* Make Painted Multi-Material Slicing Deterministic
Painted (multi-material) models sliced to slightly different G-code on
every run: ±1 µm wall coordinates and reordered islands. Hashing each stage
of the segmentation across runs showed the projected painted lines and the
per-layer Voronoi segmentation were stable; the raw top/bottom projections
from slice_mesh_slabs() were not. Three causes, all thread-order dependent:
- slice_slabs_make_lines() appends each slab's intersection lines from a
parallel facet loop and never restored a canonical order, so the loop
start vertices and polygon order from make_slab_loops() depended on
scheduling. Sort every slab's lines with the same key slice_make_lines()
already uses.
- segmentation_top_and_bottom_layers() wrote a layer's shell projections
into neighbouring layers' vectors from the parallel loop, relying on a
parity double-buffer that assumes TBB ranges are exactly one group wide
and aligned, which blocked_range does not guarantee; two threads could
append to the same vector. Each source layer now records its projections
in its own slot and they are gathered per target layer in source order.
- The painted-line sort in post_process_painted_lines() was not a total
order: projections of one span from facets of different colours tied on
every key and the first one won the span. Colour and end points now break
the tie.
Three multi-threaded runs of each painted fixture now give one G-code;
unpainted output is unchanged.
* Test That Slab Slicing Does Not Depend on the Thread Schedule
Projects a dense, tilted sphere with slice_mesh_slabs() on one thread and
then three times multi-threaded, and requires the polygons to match exactly,
vertex order included. Fails without the canonical line sort, passes with it.
* Add Missing Includes Across src/slic3r/GUI
Every GUI source and header now directly includes the headers declaring what it uses, rather than relying on the precompiled header or transitive includes. Generated with clang-tidy misc-include-cleaner, plus one hand edit making CalibrationPanel.hpp self-contained.
* Drop the OS-Specific Includes Added Outside Their Platform Guards
GLib, GTK, D-Bus and POSIX headers are only used inside platform #if blocks, which already include them. Added unconditionally at the top of the file they broke the Windows build.
* Add the clang-tidy Configuration That Generated These Includes
Only misc-include-cleaner's missing-include check, with the headers it must never suggest: per-platform, internal and OS-specific ones that would break other platforms or are not meant to be included directly.
* Match Windows Paths in the clang-tidy Ignore List
Header paths use backslashes on Windows, so every / in a pattern is now [/\\]. The Windows SDK headers are ignored alongside the other OS-specific ones, and the list is one pattern per line. Suggested by @raistlin7447 from a Windows clang-cl run.
filament_minimal_purge_on_wipe_tower became variant-keyed upstream, which
invalidated the comment claiming none of full_config's keys were.
WipeTower2::extract_wipe_volumes indexes it by raw filament slot. Not reachable
with shipped presets; noted rather than worked around.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
ComboBox::SetLabel is overridden and writes the text control when the text
control is shown, which it is on an editable combo. Clearing the label after a
pick therefore erased the name. Removed; the label is never written on this
control.
Suggestions are also rebuilt when the list opens. Built in add_row they filtered
against only the rows that already existed, so a row was offered names the rows
below it had taken.
Drops the 1px inset on the Primary label, which matched a frame the name field
no longer has.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
138 commits. The count is large because texture displacement merged with its
whole branch history behind it, going back to July, alongside config and preset
file locking across instances, a foundation for configurable printer agent
connections, and a day of smaller fixes and CI work.
Two conflicts, both the same shape: each side had appended to a sorted list and
git could not choose an order. libslic3r's CMakeLists gained InstanceLock
alongside our IMEXHelpers and IMEXZones, and the preset bundle loading test
gained an include for ParallelResolve alongside ours for IMEXHelpers. Both sides
kept, alphabetical. No logic conflicted.
Verified: 740 targets build clean under -Werror, and the Release suite passes
1740 of 1740, up from 1665 -- the 75 new cases arrived with the merge and all
pass. That mattered more than usual here, since preset loading and config
locking are both areas the IMEX preset code touches.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The name field becomes an editable ComboBox, the same pattern the sidebar uses
for parameters like sparse infill anchor length: predefined entries in a
drop-down, with the text still typeable. The mode table is authored for whatever
hardware the user has, so a closed list would be wrong -- nothing in the slicer
reads a mode's name except as the key a plate stores -- but the conventional
names are worth offering rather than leaving everyone to retype them.
What is offered follows the tool grid rather than a fixed list. Four carriages
get iq-copy and iq-mirror; multicolor needs a Span partner beside the primary
and a second gantry to copy the pair onto, so mc-copy and mc-mirror appear only
on a grid that can hold one. imex_resolve_routing() already refuses a multicolor
mode with no Span on the primary's gantry, and suggesting a name it would then
reject is worse than not suggesting it. Names a row already uses are dropped, so
the list only ever offers what is still free.
Two things about ComboBox matter when it is editable, which nothing else in the
tree does -- the other 78 call sites all pass wxCB_READONLY:
GetValue() returns the drop-down selection whenever there is one, so a name
typed after picking a suggestion would be silently discarded. Every read goes
through GetTextCtrl() instead. Field.cpp reconciles the same way for its own
open enums.
The constructor hands its value to TextInput as the LABEL -- the small
right-aligned slot a unit like "mm" occupies -- because a read-only combo hides
the text control and shows the label in its place. Left there, the name rendered
as a greyed echo beside the hint while the field itself sat empty. The combo is
built empty and the value written to the text control, and the selection handler
clears the label again afterwards, since SetSelection() writes there too.
The mode column widens to 176 to leave room for the drop-down arrow, with the
header spacer deriving from the same constant.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Lock Config and Preset Files Across Instances and Write Them Atomically
Every running instance shares one OrcaSlicer.conf and one user preset
tree, and nothing kept their writers apart. Two instances saving at the
same moment, or the cloud preset sync thread writing while the GUI thread
saved, could interleave, and a reader in another instance could open a
preset JSON or .info file between truncate and close and get a partial
file, dropping that preset for the session with a parse error.
Add InstanceLock, a scoped guard that serialises the threads of one
process through a recursive mutex and other processes through an advisory
OS file lock: flock on POSIX, held on the guard's own descriptor so no
other close in the process can drop it, and LockFileEx on Windows. The
outermost guard opens the lock file and closes it on release, so nothing
stays open between saves and a data dir can be removed once nothing is
saving into it; the file itself is kept, since deleting it would let a
third instance lock a fresh file while the second still holds the old
one. It is best effort: when the lock file cannot be opened or locked, or
another instance still holds it after a second, the guard logs once and
lets the write proceed, then leaves the file alone for ten seconds, so a
hung instance never blocks every other one and a holder stuck in a
debugger does not cost a stall per save. The guard sits at the leaf
readers and writers: set_sync_info_and_save() calls save_info() under the
preset collection mutex, so a batch lock around save_user_presets() would
invert the order against the sync thread. The user preset scan reads its
files on worker threads without the guard, since the mutex would
serialise them, and takes it per file in the serial commit step, so a
save never waits for the whole scan. Each read keeps the bytes of the
preset and its .info as they were before parsing; commit compares them
with the disk under the guard and reads a file that changed again, so it
never deletes or writes back over another instance's newer save, nor
installs a .json and .info from two different saves; a preset another
instance removed in the meantime is not installed. Without the guard, in
a cool-down, the scan still loads the presets but leaves their files
alone: an unreadable file stays for the next scan, and a derived
compatible printer is not written back. Read-only scans, which is what
the CLI does, take no lock and create no lock file.
AppConfig holds OrcaSlicer.conf.lock in load() and save(); load is
included because the Windows path restores from the .bak copy. Every
user preset writer and reader holds user.lock: Preset::save(), which
writes no .info when the preset itself could not be written, since an
.info without its preset reads as a cloud deletion request, save_info(),
reload() and remove_files(), each preset the scan commits, the
bundle metadata reads and write, the .info removal after a cloud-confirmed
delete, the orphaned-.info scan on the sync thread, the bundle folder
removal on unsubscribe and the physical printer writers and delete
paths. A bundle import extracts under cache/ into a folder per process
and per import, where no scan reads.
Preset JSON, .info, bundle metadata, physical printer and config files,
and the caches and state files that already used a temporary by hand,
now go through write_file_atomically(), which writes <file>.<pid>.<n>.tmp
beside the target and renames it over, so a reader that never waits sees
a complete old or new file. A symlink is followed; a target that is not
a regular file is written in place; and when no temporary can be created
beside an existing target, or the rename itself is refused, by a Windows
reader holding the file open or a mount that cannot replace in one step,
the helper writes in place as before, since losing the save is worse
than a torn read. On POSIX the rename replaces the
target atomically where the old code removed it first and left a window
with no file at all; only a mount that refuses a one-step replace gets
the old remove-then-rename. A crash between temporary and rename leaves
the temporary behind, which no scan reads. Preset::save() returns
whether it wrote the preset, so the scan counts a compatible printer it
could not write back as an error. A failed config write keeps
the config dirty, and the idle handler waits ten seconds before retrying
while an explicit save always tries.
* Run the Cross-Process Lock Test on Every Platform
The test that checks the guard yields to a lock held elsewhere forked a
child to hold it, so it was left out on Windows. The OS lock belongs to
the handle on Windows and to the open file description elsewhere, so a
second handle in the same process is refused like another instance
would be. The test now holds the lock that way and runs everywhere.
extrude_infill() and extrude_support() reversed the layer's extrusion
entities in place while chaining them, so each export started from the
previous one's reversed toolpaths, and each copy of an object from the
copy before it. The export-time region lists now hold const pointers,
and chaining reverses a clone instead.
The display-name tests call set_user_session(), which persists the session.
The agent they built was in keychain mode, so every run saved a fake
OrcaSlicer/Auth session into the system keychain of whoever ran the tests,
replacing their real Orca Cloud login on any desktop with a working keychain.
Move them next to the other agent tests and build the agent the same way:
encrypted-file mode with a throwaway config directory.
An ironing line spacing of 0 reached the fillers from a 3MF, the CLI or
the per-filament override, which has no GUI guard. Concentric ironing
then never finished slicing, because a zero inset never shrinks the
region, and rectilinear ironing was silently dropped. Tiny positive
values produced an unprintable number of lines.
Top surface and support ironing now clamp the spacing to the 0.05 mm
floor the process GUI guard already enforces, so these configurations
iron at that spacing. Spacings at or above the floor, including every
shipped profile, are unchanged. The concentric filler also returns early
on a non-positive step so no other caller can hang it, and the filament
settings page now resets a too-small override the same way the process
page does.
# Description
With Xcode 27, building deps on macOS 26 fails at the Python install
step with a segfault, and a libpython built with Xcode 27 crashes on
macOS 12–26 the first time anything calls `os.pipe()`, which every
plugin `subprocess` call does. The macOS 27 SDK declares `pipe2()` and
`dup3()` as macOS 27-only, and CPython 3.12 calls them without a runtime
check once configure finds them, so on older systems they resolve to
NULL. This keeps CPython on the `pipe()`/`dup2()` fallbacks it already
uses with older SDKs; upstream fixed it in 3.13+
([python/cpython#153711](https://github.com/python/cpython/issues/153711))
but not in 3.12.
No change for builds with Xcode 26 or older, or on Linux and Windows.
# Screenshots/Recordings/Graphs
<!--
> Please attach relevant screenshots to showcase the UI changes.
> Please attach images that can help explain the changes.
-->
## Tests
Rebuilt deps with Xcode 27 on macOS 26.6: the Python install step now
completes, the installed libpython no longer imports `pipe2`/`dup3`, and
CPython's `test_os`, `test_subprocess` and `test_posix` pass, apart from
one test that needs `_testcapi`, which `--disable-test-modules` leaves
out. Running CPython's configure against the macOS 26.5 and 27.0 SDKs
gives a byte-identical `pyconfig.h` for 26.5 with and without this
change, and for 27.0 with it. The x86_64 cross-build path was configured
on arm64 to confirm both of its configure runs pick up the change.
<!--
> A guide for users on how to download the artifacts from this PR.
-->
[How to Download Pull Requests Artifacts for
Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
The plugin test fixtures start the interpreter before the test points
data_dir at its temporary directory, so PythonInterpreter creates
{data_dir}/python/packages and {data_dir}/log with an empty data_dir: a
python/ and log/ folder in whatever directory the tests run from. When that
is the test binary's folder, the next run's embedded-interpreter tests took
the stray python/ as their home and failed to start Python.
Give each fixture that initializes the plugin manager its own temporary
data directory, set up before initialize(), and only use the python/ folder
next to the test binary as the interpreter's home when it holds a standard
library.
With stealth mode off the home page asks for the login status every 2 s,
and while nobody is logged in that ends in clear_user_secret(), which
opened the system keychain and deleted the OrcaSlicer/Auth entry on the
UI thread every tick. A working keychain cost a D-Bus round trip per tick;
a keychain that never answers blocked the UI for 25 s per tick. It also
deleted a login another running instance had just saved, and ignored
use_encrypted_token_file, so opting out of the keychain did not help.
Remember whether this process read a secret from the store or wrote one,
and only then touch the store when a logged-out poll asks for a logout.
A logged-out instance never touches the keychain, and in encrypted-file
mode the poll no longer opens the keychain at all. A secret this process
cannot read, such as a token file encrypted for another OS user sharing
the data directory, is left alone by the poll. An explicit logout still
wipes both backends, so a token stranded by switching the token storage
option cannot sign the account back in later.
# Description
Include variant-aware validation, temperature and pressure controls,
named nozzle selection, and filament sidebar refresh.
## Support nozzle-specific filament cooling and tuning
Filament presets can require different cooling and tuning for Standard
and High Flow nozzle variants. This change makes part and auxiliary
cooling, pressure advance, temperature limits, and multitool ramming
settings follow the selected variant, with matching UI controls and
profile validation.
The Snapmaker U1 profiles in #15755 / Snorca illustrate why this
matters:
| Profile | Standard cooling | High Flow cooling |
|---|---|---|
| Snapmaker ABS | Part fan: 15–15% | Part fan: 10–60% |
| Snapmaker PETG HF, 0.4 mm | Part fan: 20–40% | Part fan: 30–60% |
| Snapmaker PETG-CF | Part fan: 0–20%; auxiliary: 0% | Part fan: 5–40%;
auxiliary: 20% |
| Snapmaker PLA Matte | Auxiliary: 80% | Auxiliary: 100% |
These differences need to survive variant selection, editing, and
slicing. Shared single values continue to apply across variants, and
short filament arrays fall back to element zero, matching the loader.
### Additional changes
- Preserve named nozzle selections when refreshing the diameter
selector.
- Enable or disable the pressure-advance input for the selected variant.
- Initialize profile-validation slicing with the printer’s declared
nozzle volume type.
- Refresh filament controls after preset loading.
Profile changes remain separate in `u1-hf`.
### Validation
- All 13 focused variant-tool tests passed.
- Broader checks encountered an existing Windows path-separator
assertion failure, reproduced with upstream code.
- C++ build and GUI validation have not been run.
[How to Download Pull Requests Artifacts for
Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
## Summary
Adds a new paint-style **Texture Displacement** gizmo that stamps
grayscale
height-map textures onto a model's surface and turns them into real
relief -
engraved or embossed detail - either as a live preview or baked into
actual mesh
geometry.
You paint where a texture applies, stack up to **8 blended texture
layers**
(image-editor semantics: Add / Subtract / Multiply / Divide), choose how
each is
projected onto the surface (Triplanar / Cylindrical / Spherical / LSCM
unwrap /
From-view), and - for the LSCM projection - lay the charts out by hand
in a new
dockable 2D **UV Editor** pane. Coarse models can be **Subdivided** or
**Remeshed** first so there are enough vertices to carry fine detail,
and the
result is committed with **Bake**, restricted to the painted area only.
The tool only ever affects the **painted** region; everything left
unpainted
keeps its original surface, and bake blends the relief seamlessly into
it with no
remeshing or hole-filling at the seam.
---
## User-facing features
- **Paint the affected area** with Brush (circle/sphere), single-Face,
or
Connected-area flood fill; or **Select whole model** - reusing the
existing
`TriangleSelector` / `FacetsAnnotation` painting machinery, one full
mask per
layer slot.
- **Up to 8 texture layers**, each with its own paint mask, texture, and
parameters, combined in slot order like image layers.
- **Per-layer controls:** Depth, Tile size, Rotation, Midlevel
(bidirectional
emboss/engrave), Smoothing, Edge smoothing, Invert, Blend mode, Tile
(Repeat / Mirrored-repeat / decal), and Projection.
- **Projection methods:** Triplanar (blended, seam-free across sharp
edges),
Cylindrical, Spherical, **Unwrap (LSCM)** - a real CGAL conformal
parameterization - and **From view** (slide-projector decals).
- **UV Editor pane** for LSCM layers: move / rotate / scale / snap / cut
/ join
islands, average texel density, Checker and Distortion overlays, manual
mark-
seam workflow, live model update while dragging.
- **View modes:** Normal (true displaced geometry = what Bake produces),
Fast
(GPU bump-shaded approximation of the active layer), Checker, Distortion
heatmap, and an independent Wireframe toggle.
- **Mesh prep:** Subdivide (1–5* uniform 1->4 split) with cyan-wireframe
preview,
and CGAL isotropic **Remesh** to a target edge length.
- **Texture library:** 10 shipped seamless 512×512 grayscale height
maps, plus
import of any PNG/JPG/BMP (converted to an 8-bit grayscale map and
copied into
the user data dir so app updates can't clobber it).
- **Bake** runs in the background (off the UI thread); the preview is
free to
explore and only Bake changes the real mesh.
---
## How it works (implementation)
- **Bake is accumulate-then-displace and topology-preserving.** The
output mesh
has exactly the input's vertices and triangles in the same order; only
displaced vertex positions differ. Each layer is evaluated against the
**base
mesh** and folded per-vertex into a shared accumulator via its blend
mode, then
every touched vertex moves once along its precomputed undisplaced
normal. This
replaced an earlier sequential re-mesh-per-layer design that was the
root cause
of the "second layer never applies" bug and made blend modes impossible.
- **Boundary vertices are pinned.** Any vertex shared with an unpainted
triangle
is never displaced, which is what keeps bakes seamless with zero
remeshing.
- **LSCM unwrap** uses a new `MeshBoolean::cgal::parameterize_lscm()`
built on
CGAL's already-vendored `Surface_mesh_parameterization` package - **no
new
external dependency**.
- **Fast GPU preview** perturbs the shading normal from the height
gradient
(analytic mm-per-mm slope for triplanar; Mikkelsen's
screen-space-derivative
method for the conformal LSCM path), so apparent depth matches the bake.
- **Background jobs:** preview compute and bake both run off the UI
thread on the
shared job worker (queued, not `replace_job`, so a preview never cancels
an
in-flight bake); a generation counter discards stale results.
- **UV Editor** shares the app's single real `wxGLContext` and reuses
the
registered `flat`/`flat_texture` shaders; island drags update one affine
matrix
per island rather than re-uploading geometry.
---
## Backward compatibility & constraints
- **Feature is fully gated behind the new gizmo** - it adds no new
default
behavior and does not touch existing slicing, profiles, or defaults.
Models
that never open the tool are unaffected.
- **Cross-platform** - pure `libslic3r` / `libslic3r_gui` /
`libslic3r_cgal`
code; no new dependency and no `deps/` rebuild. (Built and tested on
Windows;
no platform-specific APIs introduced.)
- **`.3mf` compatibility:** **baked** relief round-trips fine, since it
becomes
ordinary mesh geometry via the existing serialization path. **Unbaked**
paint
masks and layer definitions are **not yet serialized** - see
Limitations. No
existing project data is affected.
---
## Testing
Unit tests in `tests/libslic3r/test_texture_displacement.cpp` - **run
and
passing** (7 cases, 116 assertions). Coverage:
- `decode_height_texture` round-trip
- Empty-layer no-op
- Full-cube uniform displacement
- Boundary-vertex pinning on a hand-built fan mesh
- Regression: a **second layer over the same area actually contributes**
(the
bug the bake rewrite fixed)
- Table-driven check of all four blend modes
- The lowest painted layer ignoring its blend mode
`BUILD_TESTS` is `OFF` in the checked-in cache; enable to run:
```bash
cmake -S . -B build -DBUILD_TESTS=ON
cmake --build build --config Release --target libslic3r_tests -- -m
./build/tests/libslic3r/Release/libslic3r_tests.exe "[TextureDisplacement]" --order rand
```
---
Building deps with Xcode 27 on macOS 26 failed at the Python install step,
and a libpython built with Xcode 27 segfaulted on macOS 12-26 whenever a
plugin started a subprocess.
Community work from Rob Niccum, adding 0.04mm Ultra Fine and 0.08mm Extra Fine
for the 0.4 nozzle, a toolchange prime on the three IQEX machines, and
recompressed cover art and build plate model that are byte-identical in content.
Bundle version bumped to 02.04.00.13 here rather than in his branch, so the two
of us were not editing the same line while his review was open. Without the bump
the updater refuses the bundle outright, and nothing in CI catches that.
Verified rather than assumed, since his own validator predates the parallel
printing code and the fine tiers changed shape during review: the full profile
check passes all five stages tree-wide, and both new tiers slice clean on all
four 0.4 machines, 8 of 8. His last revision dropped a bottom_shell_thickness
override that was making those tiers thinner against our common process rather
than thicker against his; the emitted G-code now carries the inherited 1.0,
which is what that fix was for.
Co-Authored-By: Rob Niccum <klober81@users.noreply.github.com>
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Eleven commits, including a typed-config G-code export speedup, a printer agent
refactor that generalizes the infrastructure beyond Bambu, gyroid optimization,
and three CLI crash fixes.
One conflict, in PrintConfig.cpp. Upstream introduced a new_def macro and began
migrating the placeholder table onto it, adding curr_bed_type that way in the
same block where this branch had added imex_mode, imex_mode_index and
imex_mode_gcode in the older def = this->add(...) form. Both sides are kept and
ours are converted to the macro, which expands to the same three statements and
wraps label and tooltip in L() exactly as before, so nothing changes about what
is registered or what is translatable.
Note for anyone building this branch: the agent refactor adds a dependency,
LibDataChannel, so the deps tree needs dep_DataChannel built before the app will
configure. A distribution package of the same name will be found first if one is
installed, and the resulting error names a missing RelWithDebInfo location
rather than the wrong package, so point LibDataChannel_DIR at the dependency
prefix if that happens.
Verified: 789 targets build clean under -Werror, and the Release suite passes
1665 of 1665, up from 1630 before the merge -- the 35 new cases arrived with it
and all pass.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Addresses the interface notes on the IDEX/IQEX modes editor.
Add Mode moves from below the rows to the top of the panel, beside a "?" button
that now carries the overview text as its tooltip. At the bottom the button
shifted down the page every time a mode was added, so where it sat depended on
how many modes already existed. It is an Orca Button in the Confirm style, width
matched to the mode column it creates a row in, and the panel opens on the
legend rather than on a paragraph.
Remove moves out of the right-hand column, where it sat one icon away from
Edit -- a destructive control beside the one pressed most -- to under the name
field it deletes, and its icon becomes a boxed minus rather than an X, which
read as "close". Reset joins Edit in the right-hand column, which is now
top-aligned so the icons hold position regardless of row height. Tool tiles are
square at 24px, and the header spacer tracks that width so the column titles
stay over their columns when the grid changes shape.
The two text fields were landing on GTK's near-black default border, invisible
against the panel: measured 45,45,49 against a 43,43,43 background, where the
settings fields above use 74,74,81. wxTextCtrl cannot color its own border, so
each sits in a one pixel frame taking the color TextInput derives for the
theme, and carries wxBORDER_NONE so Windows and macOS do not draw a native edge
inside it. The G-code boxes also take the monospace face EditGCodeDialog uses.
Bed zone fills drop to roughly half opacity in the Standard theme. They cover
whole quadrants for a whole session, so at swatch saturation they dominate the
scene. The collision strip is dimmed less, since it marks where a head hits
something. The deuteranopia, tritanopia and high contrast themes keep their
alphas: those are chosen for discriminability, which is the opposite trade.
Also fixes the icon size never applying. All four ScalableButton call sites
passed eight arguments, so the size bound to use_default_disabled_bitmap and
bmp_px_cnt kept its default of 16. Both are passed now.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Fan speeds, the recommended nozzle temperature range, minimal purge and
multi-tool ramming flow now take one value per extruder variant. Each
single value is repeated for every variant the filament lists, so every
preset loads exactly what it did before.
set_filament_pressure_advance's declaration said -1 omits the tool qualifier,
without qualification. That holds on Klipper, Marlin and BBL but not on
RepRapFirmware, where no-tool keeps the historical `D0`: a bare M572 applies to
whichever tool is selected and errors when none is, so omitting the qualifier
would make pressure advance depend on tool-selection state for every RRF user,
none of whom are using IMEX. The behavior is deliberate and unchanged; only the
declaration overstated it. GCodeWriter::set_pressure_advance and the index-space
notes in IMEXHelpers.hpp already described it correctly.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
In a parallel mode no tool changes occur, so two loops address each active
carriage explicitly: pressure advance before the print, and the second-layer
drop off the initial-layer temperature. Neither had coverage, and both fail
silently -- a carriage missing from one emits nothing at all, so it holds the
initial-layer temperature for the whole job, or runs on whatever pressure
advance the firmware was last given. The new case pins that the carriages
addressed are exactly the ones the mode declares active, each with the values of
the slot physical_extruder_map routes its head to.
The test needs filament_self_index, set here on imex_7x4_printer() so the whole
file has it. Production authors that key 1..n; its all-1s default collapses
every per-filament vector to filament 1's value through get_config_index_base(),
which leaves a per-slot assertion comparing a value against itself.
Also bounds the second-layer loop on filament_diameter alone. The bound belongs
in slot space, and filament_diameter is the one per-filament vector never
expanded per variant; the previous min() against nozzle_temperature mixed the
two index spaces without changing the result. The pressure advance loop already
bounds this way, so the two now read alike.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The lane map fetched over Moonraker was applied to whichever printer preset
happened to be edited when the response arrived, with no check that it was the
machine polled. Not a race, as the whole chain runs on the GUI thread with the UI
blocked, but a steady-state mismatch: two IMEX printers of different models with
the same logical extruder count both pass every existing guard, and the map is
written to the wrong preset and dirties it with no user action.
The pairing is now evaluated when the callback runs, against the selected device,
on the predicate update_sync_status() uses. Capturing an identity at connect time
would instead ask whether the edited preset had changed since then, and would
reject the user who selects a machine and only then switches to its matching
preset.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
A plate can carry its own parallel mode, or leave it on Primary and inherit the
process preset's. set_imex_mode() erases the key on Primary precisely so the
preset's value survives the config merge, and the slicer honors it: Print::validate()
and the G-code path both read the merged object config, so such a plate slices, and
emits, in the preset's mode.
Three places that describe that plate did not resolve it the same way. They read
the plate's own value and stopped, so on a plate left at Primary:
the multi-material conflict badge stayed dark on a plate validate() will refuse,
which is the one invariant the comment above it claims to keep;
the bed-temperature and filament-type warnings never ran, so the job went out in
copy or mirror with a mismatched bed and no notice;
the plate tooltip reported Primary for a plate about to print in another mode.
The geometric badge beside the first of those already resolved correctly, because
it goes through the zone layout, so one badge fired while its neighbour stayed
dark on the same plate.
The fallback had been written out by hand four times. Three are now collapsed onto
one accessor, get_effective_imex_mode(); the fourth is in libslic3r, which cannot
call a GUI method and resolves the two modes itself from arguments. The remaining
callers of the raw get_imex_mode() want the raw value and keep it: the accessor
itself, the zone layout call that passes both modes separately, the mode menu and
the left-click cycle, which act on what the plate stores, and the reset that looks
for plates whose own mode was removed.
The tooltip is the one place the two readings meet. It headlines the stored mode,
because it sits on the button whose menu and click act on that value, and names
the inherited mode after it when they differ -- so one control no longer says
three different things while still telling the user what will actually print.
Reachability, honestly: nothing in the UI writes the process preset's copy today,
so this needs a hand-edited preset, a vendor process profile or a project that
carries one. It is latent rather than live -- and it stops being latent the moment
a process-level mode selector exists. Note the key lives in the process preset, so
one value there would govern every Primary plate in every project using it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Printers without a named nozzle variant no longer switch profiles when their
current diameter is picked in the sidebar. The filament tab reads the selected
variant through one helper.
Fan speeds, multi-tool ramming, the tower interface and flush temperature
fallbacks and the custom G-code placeholders now use the extruder variant a
filament prints with on each layer, instead of reading by filament id.
* Add developer flag for printer agents
* Parse user print info on the UI thread to prevent heap corruption (#119)
get_user_print_info()'s HTTP fetch can run on a worker thread (e.g. BindJob),
but parse_user_print_info() mutates userMachineList (insert/erase/delete
MachineObject). on_machine_alive (SSDP) mutates the same maps on the UI thread
without locking, so parsing off-thread races the map and frees MachineObjects
out from under it -> heap corruption.
Keep all device-list mutation on the UI thread: parse inline when already on
the main thread, otherwise marshal via CallAfter so it stays serialized with
on_machine_alive.
* Prevent loss of user access code on LAN reselect
Keep user access code intact to maintain access rights even if
device slot is unpopulated, ensuring continuous connection
and status message reception.
* Harden send flow and separate upload failure recovery (#111)
* fix(send): harden FT send path + IP pre-flight UX
* Remove early returns
* Working Moonraker and Qidi printer agent transport (#104)
Folds the Qidi AMS box-mapping print
overrides (apply_box_mapping +
start_* wrappers) that the transport
fix builds on.
* Add support for runtime error status in plugins
Distinguish a loaded plugin whose
capability errored (RuntimeError,
warn-styled, stays checked) from a
load-time Error. Status now derives
via resolve_plugin_status(); enum
ordinal keeps dialog sort priority.
Unloading clears stale errors.
* Resolve duplicate agent ID conflicts
Reject a printer-agent capability
whose agent ID is already owned by
another capability or built-in:
flag the plugin error, disable the
capability, and warn the user
instead of silently ignoring it.
* fix: checkbox should depend on plugin is_loaded status
* Replace fake-enum printer agent dropdown (#121)
A dedicated PrinterAgentChoice field
reads rows straight from the live
agent registry and stores the agent
id string, replacing the fake-coEnum
index mapping. The field moves to
TabPrinter and registers with the
searcher so UnsavedChanges renders
it; the PhysicalPrinterDialog copy
and its update hook are removed
(#125). switch_printer_agent now
resolves ids via
resolve_printer_agent_id.
* Reset device selection on agent swap or unload (#124)
set_live_printer_agent centralizes
the swap: deselect the machine,
clear stale sidebar state and the
previous agent's Other Devices, then
install the new agent (or null when
its provider vanished). Plugin
load/unload callbacks refresh the
dropdown and re-run agent selection.
load_last_machine no longer falls
back to the first available machine.
* Gate agent mode behind use_printer_agents toggle
Replace per-printer auto-activation
(is_current_printer_agent_plugin)
with a global experimental AppConfig
toggle, default off: legacy
print-host behavior is unchanged
until the user opts in. The toggle
drives device-tab routing, print
button defaults, connect-button
visibility and sidebar layout, and
dedups machine-select dialog opens.
* Track BBLPrinterAgentPlugin.py
* Add printer-agent and plugin status tests
Ports the agent lifecycle, duplicate
agent-id, built-in-id clash and
status-resolution tests. The loader
runs on a detached worker thread, so
the lifecycle tests live in their own
executable. Tests install the
production unload-side registry
wiring themselves (no GUI in the
test binary) and register agents
manually so concurrent loads stay
deterministic.
* fix: pin HTTP to prevent connection refusal
Set `use_ssl` to false to ensure Moonraker
connectivity, as the service uses HTTP rather
than HTTPS, preventing connection issues. Initialize
device info early for reliable name resolution.
* Bring Moonraker device panel to feature parity
The monitor panel showed wrong or missing
data for Moonraker printers, and its
controls did nothing.
Push payload now carries layer number and
total layers. Remaining time replaces the
wrong total_duration - print_duration
formula. The chamber light toggle maps to
Klipper SET_PIN / SET_LED, and pause,
resume and stop post to
/printer/print/{action}. Task thumbnails
resolve via /server/files/thumbnails onto
a new MachineObject thumbnail url.
Filament sync switches to pull mode so the
agent is queried on demand.
Not compiled or run.
* Stop blocking print on unreported nozzle data
* fix: make Klipper macro lamp control reliable
* Surface Moonraker webcams and gate unrunnable controls
* Keep Bambu AMS dialect out of the agent waist
M620 is Bambu firmware dialect, not a
neutral command. Composing it in
MachineObject let non-Bambu agents
(Moonraker/Klipper) forward it and
report success on firmware that
cannot run it.
Agents now own the dialect: the
default refusal on IPrinterAgent
returns not-supported so the UI
can say so; BBLPrinterAgent keeps
the byte-identical composition.
* Fix multi-color filament logic
Reuse color decoding across functions to improve
code readability and maintain consistency in
multi-color filament handling.
* Move Moonraker commands off the UI thread
Pause/resume/stop, g-code sends, temps, and
light ran synchronous HTTP on the UI thread,
freezing the app up to 10s per click on slow
or unreachable printers.
Run them on a single agent-owned FIFO worker
so g-code ordering is preserved, while command
translation stays synchronous so unsupported-
command dialogs still work.
Add a pending-disabled state to the pause,
resume, and abort buttons for Moonraker-family
printers: the icon only flips once the
WebSocket reports the real state, which also
rules out double-click races.
* Show Snapmaker U1 camera in Device tab
The U1 exposes no /server/webcams/list entry;
its camera only captures after an explicit
camera.start_monitor RPC, which the Moonraker
websocket executes unauthenticated but only
answers over MQTT - so the call is fire and
forget.
Start the camera when the camera view is
shown and renew every 300 s: the printer
retires the capture task at ~362 s and
stop_monitor is accepted but ineffective,
so teardown is simply to stop renewing.
Frames land in monitor.jpg as still JPEGs
(~2 fps at interval 0), so the webview loads
a local HTML wrapper that repolls with a
cache buster.
* fix: start stream when camera URL changes
* fix: stop Qidi slot parse throwing on null
* Keep printer-agent progress in sync
Keep the shared task progress aligned with agent
reports that lack Bambu cloud task identity.
Release the lazily allocated task during reset to
avoid leaks when machine objects reconnect.
* docs: document the printer-agent subsystem
* fix: merge access codes into one
* Reconcile implementation split with PR tip
* feat: abstract remaining gcode commands in devicemanager
* refactor: abstract bambu specific protocol to printer agent
* refactor: push bbl workflows to bbl printer agent
* remove unused
* fix: default impl
* fix callback error
* fix: remove redundant cache
* specify api for getting file transfer url
* revert file transfer abstraction
* fix: ams filament mapping workflow
* feat: update qidi to use subscription based filament sync mode
* fix: resolve stubgen byte header conflict
* fix: ams sync info and periodic ams sync via subscription workflow
* fix: skip filament sync dialog if filamentSyncMode is none
* feat: parse nozzle information for qidi and moonraker printer agents
* fix: extend access code requirements t 0, 8 or more characters.
* remove irrelevant docs
* fix: remove heavy includes from IPrinterAgent
* fix: defer filesystem and camera abstractions
* fix: remote do_fetch_filament_info from tests
* cleanup moonraker and snapmaker printer agents
* fix: access codes regression
* fix: tests
* fix: printer agent switching on preset change
* fix: remove unused variable
* fix: snapmaker U1 SelectMachineDialog blocking print
* fix: merge artifact
* fix: clear up some unrelated changes
* feat: connect to cloud printer and monitor
* feat: connect to cloud printer and monitor
* feat: generic camera stream support for http snapshot and rtsp
* fix: build & access code UI
* feat: generic camera stream support for http snapshot and rtsp
* fix: build & access code UI
* feat: connect to cloud printer and monitor
* feat: connect to cloud printer and monitor
* fix: build errors
* feat: camera via webrtc
* fix: build
* fix: cmake
* feat: remove frame assembler and change config to set protocol
* fix: orcaprinteragent refactor
* fix: LAN paths and camera stream
* feat: use ffmpeg to render http camera stream
* fix: make model_id/dev_type optional instead of blocking
* fix: connect via ip dialog
* feat: LAN impl for Orca Printer Agent
* fix: model_id resolution method for non bambu printers
* fix: ffmpeg http camera stream jittering due to incomplete frames
* fix: revert sdcard check
* feat: check printer storage status before sending
* fix: moonraker printer agent hang on printer power cut
* fix: shim layer for any compatibiliity changes
* fix: cloud printers were using the wrong MQTT endpoint
* feat: cloud download via HTTP
* temp: doc for intended change
* fix: warnings
* fix: warnings
* fix: camera auto-play on startup
* fix: split infra from impl
* fix: uninitialized ams state blocking print
* Fixes nullptr deref
* Log first before std::move
* fix: printer agent virutal optional functions
* fix: parameterize orcaslicer_copy_test_dlls() for printer_agent_plugin_tests
* Revert "fix: parameterize orcaslicer_copy_test_dlls() for printer_agent_plugin_tests"
This reverts commit 2f566e3779.
* Guard libdatachannel. Remove unused code
* fix: unit tests & unused variables
* fix(ci): deps build order for datachannel
* Resolve printer agent first before getting cloud printer agent
* fix(ci): set depends openssl
* fix: re-include apply header guarded by ifdef __APPLE__
* fix(ci): add libdatachannel to flatpak manifest
* fix: add internal_developer_mode chekc back to MediaPlayCtrl::load()
* fix: invoke js clearInterval on WebMediaController::stop
* fix: change rtc log level
* fix: inject provider, agent id and generation to get_user_print_info to ensure correct metadata
* fix: revert moonraker specific behavior
* fix: remove stale comment
* fix: use ORCA_CLOUD_PROVIDER instead of hardcoded string
* fix: remove hardcoded ICE servers
* feat: enable https camera stream mode
* fix: move non-mandatory printer agent function stubs to IPrinterAgent
* fix: dedupe compatible printer type check
* fix: stop the correct media controller
* fix: scope get_my_machine_list to printers listed under the current printer agent
* fix: move printer agent plugin tests into test_plugin_lifecycle.cpp
* fix: always build bundled DataChannel dep
* fix: disable unused DataChannel media support
* revert: filament sync work
* fix: wrap command_* with small wrapper
* fix: regression bug, connecting to bambu needs bblp username
* fix: default impl for vendor agnostic gcode commansd
* refactor: media controller playback routing and ownership
* fix: bump libdatachannel ver & update flatpak to use tar instead
* fix: stop flatpak DataChannel build from re-cloning over the sandboxed network
* fix: update windows ffmpeg prebuild
* fix: update printer agent plugin API
* fix: shift camera signaling channel to network agent
* fix: follow external-packages for flatpak libdatachannel deps & add flatpak path to use source_dir
* feat: add printer-agent.md doc to HLSD
* fix: guard DeviceManager command dispatch when no printer agent is bound
* fix: port BBL implementations from #15711
* refactor: connect_printer api and dialog
* fix(tests): make omitted printer agent operations answer like a missing agent
* fix: preserve printer agent defaults in PrinterAgentPluginCapabilityTrampoline
* test: cover printer agent default command dispatch
* fix: validate windows FFmpeg avformat library
* feat: extend optional printer model warnings to calibration & ams workflows
* fix: handle malformed printer progress values safely
* fix: clear webview document on stop
* chore: reduce diagnostic logging level to trace
* refactor: centralize printer compatibility checks
* tests: add device manager integration coverage
* tests: cover WebMediaController lifecycle with wxWebView stub
* fix: make integration tests headless
* refactor: collapse command_ams_refresh_rfid and command_ams_refresh_rfid2
* refactor: make printer connection SSL agent-specific
* fix: persist input printer host and port
* fix: use correct device id for Moonraker connections
* fix: make moonraker gcode commands asynchronous
* fix: preserve moonraker device names
* fix: add include for non BBL_RELEASE_TO_PUBLIC path in BBLPrinterAgent
---------
Co-authored-by: Andrew <159703254+andrewsoonqn@users.noreply.github.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
Co-authored-by: Lam Wei Lun <weilun.lam@gmail.com>
