Added adaptive probing comments to machine start gcode for all nozzle sizes. Adjusted process profiles for various layer heights and nozzle sizes, including changes to bridge speeds, acceleration, wall generator and support line widths according to Creality profiles s to optimize print quality and reliability.
K2 Plus filament profiles have additional move for filament start g-code on some filaments. This causes unnecessary moves and make filament profiles non-working on K2 series printers.
As these moves are already mirrored on printer profile and not used in rest of the K2 series they should be removed.
* Update 0.20mm Standard @Flashforge AD5M Pro 0.4 Nozzle.json
Change filename_format to include material and print time
* Update filename format in Flashforge profile
* Update 0.40mm Standard @Flashforge AD5M Pro 0.8 Nozzle.json
* Update filename format in Flashforge profile
* Update filename format in Flashforge profile
* Update filename format in Flashforge profile
* Update filename format in Flashforge profile
* Update filename format in Flashforge profile
* Update filename format in Flashforge profile
* Update filename format in Flashforge profile
* Update filename format in Flashforge profile
* Update filename format in Flashforge profile
* Update filename format in Flashforge profile
* Update filename format in Flashforge profile
* Update filename format in Flashforge profile
* Update filename format in Flashforge profile
* Update filename format in Flashforge profile
* Update filename format in Flashforge profile
* Update filename format in Flashforge profile
* Update filename format in Flashforge profile
* Update filename format in Flashforge profile
* Update filename format in Flashforge profile
* Update filename format in Flashforge profile
* Update filename format in Flashforge profile
* Update filename format in Flashforge profile
* Update filename format in Flashforge profile
* Update filename format in Flashforge profile
* Update filename format in Flashforge profile
* Update 0.18mm Optimal @Sovol SV08.json
This file needs compatible_printers parameter set to a proper, non-empty value. Otherwise it will show up in every Sovol printer profile.
* The 0.30mm layer height configuration for the 0.4 nozzle of the QIDI model has been removed
* Merge branch 'main' into main
* Merge branch 'SoftFever:main' into main
* Revert "The 0.30mm layer height configuration for the 0.4 nozzle of the QIDI model has been removed"
This reverts commit 8d296720b8.
* Update Qidi Q2 0.4 nozzle.json
修改Q2打印高度
* Merge branch 'SoftFever:main' into main
* Merge branch 'SoftFever:main' into main
* change machine_gcode
* Merge branch 'main' of https://github.com/HYzd766/OrcaSlicer
* Merge branch 'SoftFever:main' into main
* Multi-color code compatible with QIDI models
* Merge branch 'main' into main
* toggle axis visibility on canvas (#9666)
* toggle axis visibility on canvas
* set show_axes config on toggle
* fix: Add pause and filament change to machine gcodes for Sovol SV08 MAX (#11214)
* Add fixed Ironing Angle setting for uniform surface finish (#11195)
* Initial working fixed ironing angle implemented with new Fixed ironing angle setting
* update documentation
* Combine Fill.is_using_template_angle and Fill.alternate_fill_direction into Fill.fixed_angle
* Rename SurfaceFillParams.is_using_template_angle to SurfaceFillParam.fixed_angle.
* Initial working fixed ironing angle implemented with new Fixed ironing angle setting
* update documentation
* Combine Fill.is_using_template_angle and Fill.alternate_fill_direction into Fill.fixed_angle
* Rename SurfaceFillParams.is_using_template_angle to SurfaceFillParam.fixed_angle.
* Actually build tests on Linux and allow RelWithDebInfo
They weren't being built.
Also cleaned up --config flags which enables RelWithDebInfo on Linux,
now that Ninja Multi-Config is used, it's quite trivial.
* Remove obsolete Slic3r Perl tests
The directory doesn't exist, they're already gone.
* Add GH job for running unit tests
* Move unit test execution to script and upload test results
* Don't run scheduled builds on forks
* Only deploy from SoftFever/OrcaSlicer
Will stop failures on forks
* Use artifact instead of cache
* Tweak archive and checkout paths
Keep getting error:
```
/home/runner/work/_temp/902d0a0a-6d23-4fe0-a643-8b5cc4efd25b.sh: line 1: scripts/run_unit_tests.sh: Permission denied
```
That seems to be because I didn't use actions/checkout, the working
directory is never setup correctly? So using checkout to get scripts
directory. Unsure if archive will preserve the `build/tests/` prefix;
will find out soon.
* Use tar to package directory and write results to correct directory
Tar preserves filenames and directory structure
* Use tar -xvf not -xzf
Muscle memory failed me
* Add testing wiki page
* Save test logs on failure and choose correct directory for junit
* Consolidate apt install steps, use for unit tests too, disable non-Linux builds
Temporarily disable non-Linux builds to save time while developing
this.
Cache the apt packages to save some time searching apt and downloading
them again (though I realize this is also downloading, but hopefully
by something closer and faster).
Remove all the redundant packages listed in the workflow and debian
distribution lists.
* Remove apt install steps from workflow
`./build-linux.sh -u` is supposed to install all needed packages, so
it should build without needing anything besides that. If I'm wrong
this commit will be dropped.
* Need composite action checked out locally
* Re-enable non-Linux builds now that it's working
* Skip a deploy and a notarize in forks
They only succeed in the main repo.
* Fix multi-build for non-Release builds: share CONFIG
* Correct build errors in unit tests
Indeterminate method signatures resolved. Updated script to build all
the tests.
* Fix -g vs -e for RelWithDebInfo
* Change CONFIG->BUILD_CONFIG
Missed one in prior commits
* Reduce wasteful redundant build artifact copies
1. Don't copy the artifacts and leave them; make a hard link first;
only make a copy only while creating AppImage.
2. Don't tar up the `package` directory; nothing uses this tar AFAICT
* Fix directory name
* Change jigsaw auth test URLs to httpbin.org
No idea why the basic auth doesn't work, but it doesn't work for
`curl` CLI either. This does.
* Remove force-build
It got reverted at
e3f049829b
for unknown reasons.
* Add timeout for unit tests in GitHub Actions workflow (#11146)
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Add option to allow upload to SD-Cards marked as abnormal, also add better error description
+ Adds the options under the Network Settings to allow upload to abnormal SD-Card.
+ If not enabled user will now see why the upload is stuck at 10% depending on the sd_card_state (Readonly/Abnormal)
* Merging with current branch, and updateing "sd-card" to "storage"
* Generate localization and also change remaining sd_card_abnormal states to _storage_abnormal
* Fix issues from merge, and other bugfixes.
* Regenerate localization files.
* Improve Missing Storage Message, Add skip for abnormal storage in printer select dialog
* Add "Replace all from STL" command
this operates on the currently selected plate or on the selection
* Add more translations for "Replace all from STL"
* build fix
* "Replace all with STL" also works with multiple selected plates
* fix build
* replace all from stl: better error handling and a nicer status message box
---------
Co-authored-by: Nils Hasler <hasler@thecaptury.com>
Fix: Fixing the logic of the adaptive layer height for supports
Removing `tree_support_adaptive_layer_height` because its logic duplicates `independent_support_layer_height`
