SoftFever 780b2f1ebe fix(engine): publish the nozzle group result for sequential prints ...

The Print-level LayeredNozzleGroupResult had a single producer, the
by-layer branch of ToolOrdering, which is gated to non-sequential prints.
The by-object branch in Print::process computed a grouping only in auto
map modes and never stored it, so a sequential slice exported with a null
group result: the per-nozzle placeholder tables came up empty and any
start g-code indexing nozzle_diameter_at_nozzle_id[] aborted with
"Indexing an empty vector variable". A prior by-layer slice masked the
bug by leaving its (never cleared) result on the Print.

Now the by-object branch runs get_recommended_filament_maps in every
static map mode (in manual modes the result mirrors the user's
assignment, deviations throw as in by-layer) and publishes it
print-wide. The config write-back stays gated to auto modes: in manual
modes it would only re-store the pre-slice values.

Regression test: a two-object by-object print must publish a non-null
group result and resolve nozzle_diameter_at_nozzle_id[] in start g-code
(both fail without the fix). Suites green (libslic3r 48929/162,
fff_print 633/60); 18-fixture byte gate identical; the by-object repro
project goes from the export error to valid g-code, determinism x2.

2026-07-12 00:46:15 +08:00

..

Algorithm

External bridge fix (#12568)

2026-06-03 10:19:04 -03:00

Arachne

fix: prevent out-of-bounds crash in Arachne beading interpolation (#14656)

2026-07-08 20:58:39 +08:00

CSGMesh

Export negative parts.

2024-10-05 21:53:16 +03:00

Execution

…

Feature

FuzzySkin hole + Fix: Painted artifacts and with Sacrificial layer issues (#12479)

2026-05-08 19:22:49 +08:00

Fill

Anisotropic surfaces + Separated Infills (remake) (#11682)

2026-07-08 15:40:19 -03:00

Format

feat(engine): wire the per-filament volume-map producer pipeline

2026-07-11 04:38:31 +08:00

GCode

fix(engine): publish the nozzle group result for sequential prints

2026-07-12 00:46:15 +08:00

Geometry

Localizations refactor (#14254)

2026-06-18 09:13:51 -03:00

Optimize

…

Shape

Revert "Fix Compile Warnings (#5963)"

2024-08-12 00:00:20 +08:00

SLA

Update eigen to v5.0.1 and libigl to v2.6.0. (#11311)

2026-05-12 15:09:13 +08:00

Support

Merge branch 'main' into pr/Noisyfox/13712

2026-06-22 10:56:11 +08:00

AABBMesh.cpp

Update eigen to v5.0.1 and libigl to v2.6.0. (#11311)

2026-05-12 15:09:13 +08:00

AABBMesh.hpp

Support larger printer sizes by using 64-bit.

2024-05-10 23:47:08 +08:00

AABBTreeIndirect.hpp

Update eigen to v5.0.1 and libigl to v2.6.0. (#11311)

2026-05-12 15:09:13 +08:00

AABBTreeLines.hpp

Various ZAA fixes.

2026-03-24 09:18:38 -07:00

AnyPtr.hpp

…

AppConfig.cpp

feat: Filament Track Switch (H2-series O2L-FTS) support

2026-07-09 18:57:05 +08:00

AppConfig.hpp

ENABLE_SMOOTH_NORMALS (#14080)

2026-06-19 09:42:12 +08:00

ArcFitter.cpp

Revert changes to 'ArcFitter'

2026-03-13 02:12:10 -07:00

ArcFitter.hpp

Revert changes to 'ArcFitter'

2026-03-13 02:12:10 -07:00

Arrange.cpp

ENH: improve auto arranging of multiple single color objects

2025-09-10 10:05:07 +08:00

Arrange.hpp

Fix arrange when print-by-object and have object off-plate (#8038)

2025-01-22 10:03:21 +08:00

AStar.hpp

Feature/bs1.8beta (#2844)

2023-12-01 10:42:45 +00:00

BlacklistedLibraryCheck.cpp

Revert "Fix Compile Warnings (#5963)"

2024-08-12 00:00:20 +08:00

BlacklistedLibraryCheck.hpp

…

BoundingBox.cpp

Allow specifying rotation patterns for Sparse and Solid infill (#9924)

2025-06-22 23:10:35 +08:00

BoundingBox.hpp

feat: Add Z Anti-Aliasing (ZAA) contouring support

2026-02-09 20:42:26 +01:00

BridgeDetector.cpp

Port "No Unsupported Perimeters" feature from SS (#3189)

2024-01-28 10:12:55 +00:00

BridgeDetector.hpp

Removed the copyright and credits in the header of each file. This information is outdated and hard to update. Orca Slicer maintains the autoher info in git history so this is not necessary.

2024-06-15 14:56:44 +08:00

Brim.cpp

Fix painted mouse-ear brims snapping to wrong location (#14606)

2026-07-06 09:28:41 +08:00

Brim.hpp

Refactor skirt/brim + bugfixes related to them (#14333)

2026-06-24 15:48:31 +08:00

BrimEarsPoint.hpp

Fix:Retain the brim ears during model merging

2025-09-21 13:47:51 +08:00

BuildVolume.cpp

Fallback to per-move validation when bbox outside (#13179)

2026-04-20 19:18:03 -03:00

BuildVolume.hpp

Merge remote-tracking branch 'upstream/main' into libvgcode

2025-11-15 11:11:20 -05:00

calib.cpp

fix: PA pattern calibration crash with first layer line width 0 (#14447)

2026-06-29 09:22:23 +08:00

calib.hpp

feat(libslic3r): multi-nozzle slicing engine for H2C/A2L

2026-07-09 01:16:25 +08:00

Channel.hpp

…

Circle.cpp

feat: Add Z Anti-Aliasing (ZAA) contouring support

2026-02-09 20:42:26 +01:00

Circle.hpp

feat: Add Z Anti-Aliasing (ZAA) contouring support

2026-02-09 20:42:26 +01:00

Clipper2Utils.cpp

Top Surface Expansion (#14296)

2026-07-08 14:20:40 -03:00

Clipper2Utils.hpp

Top Surface Expansion (#14296)

2026-07-08 14:20:40 -03:00

Clipper2ZUtils.hpp

Re-include BBS's Clipperutils2 (#11415)

2025-11-22 15:39:12 +08:00

clipper.cpp

…

clipper.hpp

…

ClipperUtils.cpp

Localizations refactor (#14254)

2026-06-18 09:13:51 -03:00

ClipperUtils.hpp

feat: Add Z Anti-Aliasing (ZAA) contouring support

2026-02-09 20:42:26 +01:00

ClipperZUtils.hpp

Fix building errors when precompiled header support is disabled (#6879)

2024-09-23 19:26:18 +08:00

clonable_ptr.hpp

…

CMakeLists.txt

feat(libslic3r): multi-nozzle slicing engine for H2C/A2L

2026-07-09 01:16:25 +08:00

Color.cpp

fixes compiler warnings (#9619)

2025-06-14 21:05:25 +08:00

Color.hpp

Color & shape improvements for Axes (#9495)

2025-05-08 16:00:48 +08:00

CommonDefs.hpp

ENH: support E3D print parts display

2025-10-28 15:30:00 +08:00

Config.cpp

Initial attempt to make speed configs multi-variant

2026-05-21 09:04:27 +08:00

Config.hpp

Merge remote-tracking branch 'origin/main' into feature/h2c_support_clean

2026-07-11 23:10:54 +08:00

ContourZ.cpp

ZAA: Fix Z-contouring raycast reference plane and Eigen UB (#13510)

2026-05-08 13:22:00 -03:00

CustomGCode.cpp

…

CustomGCode.hpp

ENH: add load_model_objects_and_custom_gcodes

2023-09-22 16:21:26 +08:00

CutSurface.cpp

💥Fix crash svg use surface (#13262)

2026-04-23 00:21:19 +08:00

CutSurface.hpp

Removed the copyright and credits in the header of each file. This information is outdated and hard to update. Orca Slicer maintains the autoher info in git history so this is not necessary.

2024-06-15 14:56:44 +08:00

CutUtils.cpp

Feature: Multiple dovetail cuts (#12318)

2026-05-18 12:57:48 +08:00

CutUtils.hpp

Feature: Multiple dovetail cuts (#12318)

2026-05-18 12:57:48 +08:00

EdgeGrid.cpp

ENH: comment the asserts

2025-10-28 15:29:47 +08:00

EdgeGrid.hpp

💥Fix Crash with painted Line in some corrupted models (#12806)

2026-04-07 22:22:43 +08:00

ElephantFootCompensation.cpp

…

ElephantFootCompensation.hpp

…

Emboss.cpp

Avoid using auto as type of Eigen expressions. (#8577)

2025-02-26 23:07:23 +08:00

Emboss.hpp

Fix: Globally fixing the "milimeters" typo in the code (#13295)

2026-04-19 20:28:13 -03:00

EmbossShape.hpp

Various Emboss improvements from PS (#4039)

2024-02-13 23:56:48 +08:00

enum_bitmask.hpp

Porting of Pressure Equalizer feature from Prusa Slicer 2.6.x (#2161)

2023-09-27 21:44:45 +08:00

Exception.hpp

…

ExPolygon.cpp

Allow specifying rotation patterns for Sparse and Solid infill (#9924)

2025-06-22 23:10:35 +08:00

ExPolygon.hpp

Various ZAA fixes.

2026-03-24 09:18:38 -07:00

ExPolygonCollection.cpp

…

ExPolygonCollection.hpp

…

ExPolygonSerialize.hpp

Port Emboss & SVG gizmo from PrusaSlicer (#2819)

2023-12-09 22:46:18 +08:00

ExPolygonsIndex.cpp

Port Emboss & SVG gizmo from PrusaSlicer (#2819)

2023-12-09 22:46:18 +08:00

ExPolygonsIndex.hpp

Port Emboss & SVG gizmo from PrusaSlicer (#2819)

2023-12-09 22:46:18 +08:00

Extruder.cpp

Fix issues with non-bbl multi-head printers

2025-10-19 22:54:48 +08:00

Extruder.hpp

feat(libslic3r): multi-nozzle slicing engine for H2C/A2L

2026-07-09 01:16:25 +08:00

ExtrusionEntity.cpp

Various ZAA fixes.

2026-03-24 09:18:38 -07:00

ExtrusionEntity.hpp

Feature: Small perimeters speed for supports (#13459)

2026-07-03 17:27:57 -03:00

ExtrusionEntityCollection.cpp

Revert "Fix Compile Warnings (#5963)"

2024-08-12 00:00:20 +08:00

ExtrusionEntityCollection.hpp

Add Point3 return type getters for first and last point to ExtrusionEntity (#13855)

2026-05-27 22:07:15 +08:00

ExtrusionSimulator.cpp

feat: Add Z Anti-Aliasing (ZAA) contouring support

2026-02-09 20:42:26 +01:00

ExtrusionSimulator.hpp

…

FaceDetector.cpp

Feature/merge 1.8.4 (#3827)

2024-01-26 20:18:10 +08:00

FaceDetector.hpp

…

FilamentGroup.cpp

feat(libslic3r): multi-nozzle slicing engine for H2C/A2L

2026-07-09 01:16:25 +08:00

FilamentGroup.hpp

feat(libslic3r): multi-nozzle slicing engine for H2C/A2L

2026-07-09 01:16:25 +08:00

FilamentGroupUtils.cpp

feat(gcode): resolve per-filament variant slots per layer

2026-07-11 15:00:33 +08:00

FilamentGroupUtils.hpp

feat(libslic3r): multi-nozzle slicing engine for H2C/A2L

2026-07-09 01:16:25 +08:00

FileParserError.hpp

…

Flow.cpp

Localizations refactor (#14254)

2026-06-18 09:13:51 -03:00

Flow.hpp

Allow specifying rotation patterns for Sparse and Solid infill (#9924)

2025-06-22 23:10:35 +08:00

FlushVolCalc.cpp

Relax flushing volume thresholds for printers needing higher purge. (#11778)

2026-01-05 22:41:04 +00:00

FlushVolCalc.hpp

FIX: display the minimum flush data

2025-09-29 20:38:38 +08:00

FlushVolPredictor.cpp

FIX: display the minimum flush data

2025-09-29 20:38:38 +08:00

FlushVolPredictor.hpp

FIX: display the minimum flush data

2025-09-29 20:38:38 +08:00

format.hpp

…

GCode.cpp

fix(engine): publish the nozzle group result for sequential prints

2026-07-12 00:46:15 +08:00

GCode.hpp

feat(gcode): resolve per-filament variant slots per layer

2026-07-11 15:00:33 +08:00

GCodeReader.cpp

Import PrusaSlicer G2/G3 arc discretization code

2025-09-24 22:49:14 -04:00

GCodeReader.hpp

Merge remote-tracking branch 'upstream/main' into libvgcode

2025-11-15 11:11:20 -05:00

GCodeSender.cpp

…

GCodeSender.hpp

…

GCodeWriter.cpp

feat(libslic3r): multi-nozzle slicing engine for H2C/A2L

2026-07-09 01:16:25 +08:00

GCodeWriter.hpp

feat(libslic3r): multi-nozzle slicing engine for H2C/A2L

2026-07-09 01:16:25 +08:00

Geometry.cpp

Port coordinate system selection for Move, Scale and Rotate gizmo (#9099)

2025-04-04 23:07:00 +08:00

Geometry.hpp

Fix issue that Geometry::deg2rad() do calculation in the same type as the parameter, which means if the parameter is int then you lose all the precision

2026-05-07 22:32:56 +08:00

I18N.hpp

…

Int128.hpp

feat: native Windows ARM64 build support (Snapdragon X Elite) (supersedes #14059) (#14381)

2026-06-25 22:10:49 +08:00

IntersectionPoints.cpp

Removed the copyright and credits in the header of each file. This information is outdated and hard to update. Orca Slicer maintains the autoher info in git history so this is not necessary.

2024-06-15 14:56:44 +08:00

IntersectionPoints.hpp

Removed the copyright and credits in the header of each file. This information is outdated and hard to update. Orca Slicer maintains the autoher info in git history so this is not necessary.

2024-06-15 14:56:44 +08:00

JumpPointSearch.cpp

Upgrade clipper & improve multi-thread performance (#7177)

2025-06-18 17:50:44 +08:00

JumpPointSearch.hpp

Feature/bs1.8beta (#2844)

2023-12-01 10:42:45 +00:00

KDTreeIndirect.hpp

…

Layer.cpp

Feature: Small perimeters speed for supports (#13459)

2026-07-03 17:27:57 -03:00

Layer.hpp

Make inner_wall_speed multi-variant

2026-05-21 09:04:27 +08:00

LayerRegion.cpp

Bridge Line Width + Improve bridge density (#11255)

2026-06-03 10:16:59 -03:00

libslic3r_version.h.in

Revert extraneous changes.

2026-03-11 17:20:12 -07:00

libslic3r.cpp

switch res for large printer

2024-05-12 23:35:41 +08:00

libslic3r.h

Fix a bug where the maximum line width limit is inconsistent across different checks.

2025-07-30 21:22:40 +08:00

Line.cpp

Fix:path conflictcheck

2025-10-28 15:29:55 +08:00

Line.hpp

Various ZAA fixes.

2026-03-24 09:18:38 -07:00

LocalesUtils.cpp

…

LocalesUtils.hpp

…

MacUtils.hpp

ENH:Text not centered on mac15

2025-09-18 17:08:18 +08:00

MacUtils.mm

ENH:Text not centered on mac15

2025-09-18 17:08:18 +08:00

MarchingSquares.hpp

Optimize and simplify MarchingSquares.hpp. (#10747)

2025-10-19 19:27:55 +08:00

MaterialType.cpp

Add CoPE material type (#11867)

2026-01-14 19:51:13 +08:00

MaterialType.hpp

Material Type standarization + Technical Filament Types (#10553)

2025-10-19 21:57:34 +08:00

Measure.cpp

Avoid using auto as type of Eigen expressions. (#8577)

2025-02-26 23:07:23 +08:00

Measure.hpp

Measure: Port of BBS' improved version of measure gizmo

2024-11-06 20:19:52 +08:00

MeasureUtils.hpp

Measure: Port of BBS' improved version of measure gizmo

2024-11-06 20:19:52 +08:00

MeshBoolean.cpp

CGAL Fix Model: New for Linux and Mac (#12155)

2026-04-24 16:28:28 +08:00

MeshBoolean.hpp

CGAL Fix Model: New for Linux and Mac (#12155)

2026-04-24 16:28:28 +08:00

MeshSplitImpl.hpp

Support larger printer sizes by using 64-bit.

2024-05-10 23:47:08 +08:00

MinAreaBoundingBox.cpp

…

MinAreaBoundingBox.hpp

…

MinimumSpanningTree.cpp

…

MinimumSpanningTree.hpp

…

miniz_extension.cpp

Fix garbled Chinese filenames when importing ZIP files. (#14633)

2026-07-08 20:24:55 +08:00

miniz_extension.hpp

Fix garbled Chinese filenames when importing ZIP files. (#14633)

2026-07-08 20:24:55 +08:00

Model.cpp

Anisotropic surfaces + Separated Infills (remake) (#11682)

2026-07-08 15:40:19 -03:00

Model.hpp

Anisotropic surfaces + Separated Infills (remake) (#11682)

2026-07-08 15:40:19 -03:00

ModelArrange.cpp

Revive the disabled fff_print test suite (#14196)

2026-06-14 17:42:53 +08:00

ModelArrange.hpp

Fix tests (#10906)

2025-12-08 22:42:11 +08:00

MTUtils.hpp

…

MultiMaterialSegmentation.cpp

Merge branch 'main' into pr/Noisyfox/13712

2026-06-22 10:56:11 +08:00

MultiMaterialSegmentation.hpp

Add fuzzy skin painting (#9979)

2025-07-18 16:01:25 +08:00

MultiNozzleUtils.cpp

feat(libslic3r): multi-nozzle slicing engine for H2C/A2L

2026-07-09 01:16:25 +08:00

MultiNozzleUtils.hpp

feat(libslic3r): multi-nozzle slicing engine for H2C/A2L

2026-07-09 01:16:25 +08:00

MultiPoint.cpp

Fix scarf seams

2026-03-13 01:56:51 -07:00

MultiPoint.hpp

Fix scarf seams

2026-03-13 01:56:51 -07:00

MutablePolygon.cpp

Localizations refactor (#14254)

2026-06-18 09:13:51 -03:00

MutablePolygon.hpp

…

MutablePriorityQueue.hpp

Feature/bs1.8beta (#2844)

2023-12-01 10:42:45 +00:00

NormalUtils.cpp

Support larger printer sizes by using 64-bit.

2024-05-10 23:47:08 +08:00

NormalUtils.hpp

Support larger printer sizes by using 64-bit.

2024-05-10 23:47:08 +08:00

NSVGUtils.cpp

Removed the copyright and credits in the header of each file. This information is outdated and hard to update. Orca Slicer maintains the autoher info in git history so this is not necessary.

2024-06-15 14:56:44 +08:00

NSVGUtils.hpp

Removed the copyright and credits in the header of each file. This information is outdated and hard to update. Orca Slicer maintains the autoher info in git history so this is not necessary.

2024-06-15 14:56:44 +08:00

ObjColorUtils.cpp

ENH:Obj import supports up to 32 colors

2025-09-18 16:10:27 +08:00

ObjColorUtils.hpp

ENH:Obj import supports up to 32 colors

2025-09-18 16:10:27 +08:00

ObjectID.cpp

…

ObjectID.hpp

Feature/merge 1.8.4 (#3827)

2024-01-26 20:18:10 +08:00

OpenVDBUtils.cpp

…

OpenVDBUtils.hpp

Support larger printer sizes by using 64-bit.

2024-05-10 23:47:08 +08:00

Orient.cpp

feat(orient): auto-orient the largest overhang toward the cooling fan

2026-07-10 16:21:48 +08:00

Orient.hpp

feat(orient): auto-orient the largest overhang toward the cooling fan

2026-07-10 16:21:48 +08:00

ParameterUtils.cpp

FIX: add clumping detect area parameter

2025-10-02 17:07:17 +08:00

ParameterUtils.hpp

FIX: add clumping detect area parameter

2025-10-02 17:07:17 +08:00

pchheader.cpp

…

pchheader.hpp

Merge branch 'main' into dev/step-import-dialog

2025-04-05 17:47:59 +08:00

PerimeterGenerator.cpp

Top Surface Expansion (#14296)

2026-07-08 14:20:40 -03:00

PerimeterGenerator.hpp

ENH: Relative bridge direction + Align bridge/Ironing angles with model (#12055)

2026-06-03 10:12:26 -03:00

PlaceholderParser.cpp

feat: add regex_replace() string transform to placeholder templates (#14650)

2026-07-08 08:58:51 +08:00

PlaceholderParser.hpp

add user name placeholder (#10109)

2025-07-18 15:43:46 +08:00

Platform.cpp

…

Platform.hpp

…

PNGReadWrite.cpp

A *lot* of import fixes for flatpak (#3909)

2024-01-31 11:23:29 +00:00

PNGReadWrite.hpp

A *lot* of import fixes for flatpak (#3909)

2024-01-31 11:23:29 +00:00

Point.cpp

Fix scarf seams

2026-03-13 01:56:51 -07:00

Point.hpp

Various ZAA fixes.

2026-03-24 09:18:38 -07:00

Polygon.cpp

Fix crash ZAA (#13450)

2026-05-04 15:52:34 +08:00

Polygon.hpp

Upgrade clipper & improve multi-thread performance (#7177)

2025-06-18 17:50:44 +08:00

PolygonTrimmer.cpp

…

PolygonTrimmer.hpp

Upgrade clipper & improve multi-thread performance (#7177)

2025-06-18 17:50:44 +08:00

Polyline.cpp

Fix scarf seams

2026-03-13 01:56:51 -07:00

Polyline.hpp

Fix scarf seams

2026-03-13 01:56:51 -07:00

Preset.cpp

feat(printer): add cooling filter support flag and expose its toggle

2026-07-10 16:38:46 +08:00

Preset.hpp

feat(libslic3r): multi-nozzle slicing engine for H2C/A2L

2026-07-09 01:16:25 +08:00

PresetBundle.cpp

feat(gui): per-filament nozzle volume selection and persistence

2026-07-11 16:37:50 +08:00

PresetBundle.hpp

feat(engine): wire the per-filament volume-map producer pipeline

2026-07-11 04:38:31 +08:00

PrincipalComponents2D.cpp

…

PrincipalComponents2D.hpp

…

Print.cpp

fix(engine): publish the nozzle group result for sequential prints

2026-07-12 00:46:15 +08:00

Print.hpp

Merge remote-tracking branch 'origin/main' into feature/h2c_support_clean

2026-07-11 23:10:54 +08:00

PrintApply.cpp

Merge remote-tracking branch 'origin/main' into feature/h2c_support_clean

2026-07-11 23:10:54 +08:00

PrintBase.cpp

feat: add {first_object_name} filename placeholder (#14497)

2026-07-03 00:14:32 +08:00

PrintBase.hpp

Fix: show all print validation warnings instead of only the last (#14112)

2026-06-18 12:45:26 +08:00

PrintConfig.cpp

Merge remote-tracking branch 'origin/main' into feature/h2c_support_clean

2026-07-11 23:10:54 +08:00

PrintConfig.hpp

Merge remote-tracking branch 'origin/main' into feature/h2c_support_clean

2026-07-11 23:10:54 +08:00

PrintConfigConstants.hpp

Fix tests (#10906)

2025-12-08 22:42:11 +08:00

PrintObject.cpp

Fix per-obj multi-variant options handling (#14700)

2026-07-11 22:21:22 +08:00

PrintObjectSlice.cpp

Fix modifiers bridge speed not respected (#13971)

2026-06-01 16:00:00 +08:00

PrintRegion.cpp

Divided filament for features (#14042)

2026-06-05 20:45:43 +08:00

ProjectTask.cpp

A *lot* of import fixes for flatpak (#3909)

2024-01-31 11:23:29 +00:00

ProjectTask.hpp

X2D Support (#13388)

2026-05-10 02:21:13 +08:00

QuadricEdgeCollapse.cpp

Support larger printer sizes by using 64-bit.

2024-05-10 23:47:08 +08:00

QuadricEdgeCollapse.hpp

…

Semver.cpp

…

Semver.hpp

Fix various memory leaks

2023-11-04 11:41:03 +08:00

ShortEdgeCollapse.cpp

Revert "Fix Compile Warnings (#5963)"

2024-08-12 00:00:20 +08:00

ShortEdgeCollapse.hpp

…

ShortestPath.cpp

Fix crashing if slicing with non organic tree support (#14074)

2026-06-07 13:31:52 +08:00

ShortestPath.hpp

feat: Add Z Anti-Aliasing (ZAA) contouring support

2026-02-09 20:42:26 +01:00

SLAPrint.cpp

Fix: show all print validation warnings instead of only the last (#14112)

2026-06-18 12:45:26 +08:00

SLAPrint.hpp

Fix: show all print validation warnings instead of only the last (#14112)

2026-06-18 12:45:26 +08:00

SLAPrintSteps.cpp

Localizations refactor (#14254)

2026-06-18 09:13:51 -03:00

SLAPrintSteps.hpp

…

SlicesToTriangleMesh.cpp

Revert "Fix Compile Warnings (#5963)"

2024-08-12 00:00:20 +08:00

SlicesToTriangleMesh.hpp

…

Slicing.cpp

Fix support interface semantics, gap handling, behavior; fix bottom interface generation for organic trees; fix non organic tree interfaces (#11812)

2026-05-10 15:12:56 +08:00

Slicing.hpp

Fix support interface semantics, gap handling, behavior; fix bottom interface generation for organic trees; fix non organic tree interfaces (#11812)

2026-05-10 15:12:56 +08:00

SlicingAdaptive.cpp

…

SlicingAdaptive.hpp

…

StreamUtils.hpp

Optimize and simplify MarchingSquares.hpp. (#10747)

2025-10-19 19:27:55 +08:00

Surface.cpp

…

Surface.hpp

Enhancement: Additional controls over bridges (#8263)

2025-02-12 22:10:57 +08:00

SurfaceCollection.cpp

Port "Extend sparse infill" from Prusa (#2134)

2023-09-29 23:39:12 +08:00

SurfaceCollection.hpp

Port "Extend sparse infill" from Prusa (#2134)

2023-09-29 23:39:12 +08:00

SurfaceMesh.hpp

Removed the copyright and credits in the header of each file. This information is outdated and hard to update. Orca Slicer maintains the autoher info in git history so this is not necessary.

2024-06-15 14:56:44 +08:00

SVG.cpp

A *lot* of import fixes for flatpak (#3909)

2024-01-31 11:23:29 +00:00

SVG.hpp

…

Technologies.hpp

ENABLE_SMOOTH_NORMALS (#14080)

2026-06-19 09:42:12 +08:00

Tesselate.cpp

…

Tesselate.hpp

…

TextConfiguration.hpp

Removed the copyright and credits in the header of each file. This information is outdated and hard to update. Orca Slicer maintains the autoher info in git history so this is not necessary.

2024-06-15 14:56:44 +08:00

Thread.cpp

…

Thread.hpp

fix(threads): bump worker thread stack to 16MB to survive CGAL emboss (#13772)

2026-05-21 16:24:54 +08:00

Time.cpp

try to fix flatpak

2026-01-29 19:19:37 +08:00

Time.hpp

init

2026-01-23 17:05:56 +08:00

Timer.cpp

Removed the copyright and credits in the header of each file. This information is outdated and hard to update. Orca Slicer maintains the autoher info in git history so this is not necessary.

2024-06-15 14:56:44 +08:00

Timer.hpp

Fix: Globally fixing the "milisecond" typo in the code (#13329)

2026-04-23 10:34:36 -03:00

TriangleMesh.cpp

Fix tests (#10906)

2025-12-08 22:42:11 +08:00

TriangleMesh.hpp

Fix tests (#10906)

2025-12-08 22:42:11 +08:00

TriangleMeshDeal.cpp

Update eigen to v5.0.1 and libigl to v2.6.0. (#11311)

2026-05-12 15:09:13 +08:00

TriangleMeshDeal.hpp

BBS Port: Mesh Subdivision (#12150)

2026-02-12 08:42:01 +08:00

TriangleMeshSlicer.cpp

Refine code

2026-05-04 20:33:13 +08:00

TriangleMeshSlicer.hpp

ENH: add vertical support enforcer

2025-02-08 11:34:40 +08:00

TriangleSelector.cpp

Fix artifact during normal paint

2026-05-10 12:35:31 +08:00

TriangleSelector.hpp

Fix artifact during normal paint

2026-05-10 12:35:31 +08:00

TriangleSetSampling.cpp

Revert "Fix Compile Warnings (#5963)"

2024-08-12 00:00:20 +08:00

TriangleSetSampling.hpp

…

TriangulateWall.cpp

Revert "Fix Compile Warnings (#5963)"

2024-08-12 00:00:20 +08:00

TriangulateWall.hpp

Support larger printer sizes by using 64-bit.

2024-05-10 23:47:08 +08:00

Triangulation.cpp

Revert "Fix Compile Warnings (#5963)"

2024-08-12 00:00:20 +08:00

Triangulation.hpp

Removed the copyright and credits in the header of each file. This information is outdated and hard to update. Orca Slicer maintains the autoher info in git history so this is not necessary.

2024-06-15 14:56:44 +08:00

TryCatchSignal.cpp

…

TryCatchSignal.hpp

…

TryCatchSignalSEH.cpp

…

TryCatchSignalSEH.hpp

…

utils.cpp

feat(libslic3r): multi-nozzle slicing engine for H2C/A2L

2026-07-09 01:16:25 +08:00

Utils.hpp

feat(libslic3r): multi-nozzle slicing engine for H2C/A2L

2026-07-09 01:16:25 +08:00

VariableWidth.cpp

feat: Add Z Anti-Aliasing (ZAA) contouring support

2026-02-09 20:42:26 +01:00

VariableWidth.hpp

…

Zipper.cpp

…

Zipper.hpp

…