mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-09-27 19:01:02 +00:00
timschneider
1ac3b466da
Print feedback on CHX 350 with a 0.8 nozzle at 0.44 mm layer height showed curling at the retraction points with the derived value of 25 s. There is no cooling headroom left to trade: fdm_filament_pla pins fan_min_speed = fan_max_speed = 100, and additional_cooling_fan_speed is inert because no Meltingplot machine enables auxiliary_fan. Minimum layer time is the only remaining lever; 35 s prints cleanly at that geometry. The cross-section rule only fixes the ratios between nozzle sizes, so this is a calibration of the PLA anchor itself: both PLA ladders are scaled by 1.5 (Extrudr 9/20/38/56/83 s, Meltingplot PLA 8/17/30/45/66 s for 0.4/0.6/0.8/1.0/1.2). The Extrudr base fan_cooling_layer_time goes 60 -> 100 so the 1.2-nozzle value stays below it. Other materials are left unchanged - only the PLA anchor has a real counter-example so far.
80 lines
1.2 KiB
JSON
80 lines
1.2 KiB
JSON
{
|
|
"type": "filament",
|
|
"name": "Extrudr PLA NX2 Matt",
|
|
"inherits": "Generic PLA Matte @System",
|
|
"from": "system",
|
|
"setting_id": "qmPRaTcPlmtk6zB2",
|
|
"filament_id": "EXTNX2M",
|
|
"instantiation": "true",
|
|
"filament_vendor": [
|
|
"Extrudr"
|
|
],
|
|
"nozzle_temperature_range_low": [
|
|
"200"
|
|
],
|
|
"nozzle_temperature_range_high": [
|
|
"230"
|
|
],
|
|
"filament_max_volumetric_speed": [
|
|
"30"
|
|
],
|
|
"filament_adaptive_volumetric_speed": [
|
|
"1"
|
|
],
|
|
"filament_density": [
|
|
"1.3"
|
|
],
|
|
"filament_cost": [
|
|
"13"
|
|
],
|
|
"temperature_vitrification": [
|
|
"50"
|
|
],
|
|
"full_fan_speed_layer": [
|
|
"1"
|
|
],
|
|
"overhang_fan_threshold": [
|
|
"25%"
|
|
],
|
|
"fan_cooling_layer_time": [
|
|
"100"
|
|
],
|
|
"slow_down_layer_time": [
|
|
"83"
|
|
],
|
|
"cool_plate_temp": [
|
|
"60"
|
|
],
|
|
"eng_plate_temp": [
|
|
"60"
|
|
],
|
|
"hot_plate_temp": [
|
|
"60"
|
|
],
|
|
"textured_plate_temp": [
|
|
"60"
|
|
],
|
|
"cool_plate_temp_initial_layer": [
|
|
"60"
|
|
],
|
|
"eng_plate_temp_initial_layer": [
|
|
"60"
|
|
],
|
|
"hot_plate_temp_initial_layer": [
|
|
"60"
|
|
],
|
|
"textured_plate_temp_initial_layer": [
|
|
"60"
|
|
],
|
|
"filament_diameter": [
|
|
"2.85"
|
|
],
|
|
"compatible_printers": [
|
|
"Meltingplot MBL 133 1.2 nozzle",
|
|
"Meltingplot MBL 136 1.2 nozzle",
|
|
"Meltingplot MBL 308 1.2 nozzle",
|
|
"Meltingplot MBL 480 1.2 nozzle",
|
|
"Meltingplot CHX 350 1.2 nozzle"
|
|
]
|
|
}
|