mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-10-19 21:51:06 +00:00
8f1103f064
* add new repositories and new push * fix bug about setting_id * fix bug and complete the test * Fix Goofoo profiles so the bundle loads and passes profile checks Repair the OrcaFilamentLibrary index entry that broke JSON parsing, regenerate the hand-written filament ids as Orca ids, and bump the library version. Point each printer's default filament and print profiles at presets that exist, normalize the two presets that needed it, rebuild both indexes, correct the ABS-GF/PA-GF/PA6-CF filament types, align the GP1/Velo+ preset names with the library's @ spacing, and fix the casing and resolution of the model cover images. * Drop the copied Custom Klipper printer from the Goofoo bundle Goofoo shipped Custom's MyKlipper machine model verbatim, so the Add Printer list offered "Generic Klipper Printer" twice and the printer type resolved its model_id by vendor order. The Goofoo machines now inherit the shared fdm_klipper_common directly, carrying over the per-variant layer heights the removed base supplied, matching how the other Klipper vendors wire theirs. Each machine's resolved settings are unchanged. * Align the Goofoo preset names with the profile conventions The machine models and variants already followed the <Model> / <Model> <nozzle> nozzle shape, but the processes put the model in the quality slot and used the bare vendor as the @ target (0.20mm GP1 @Goofoo). They are now named like every other vendor's: <lh>mm <Quality> @<Vendor> <Model> (0.20mm Standard @Goofoo GP1), with the machines' default_print_profile and the index updated to match. The four leaves also inherit the shared fdm_process_klipper_common directly instead of the copied Custom "0.20mm Standard @MyKlipper" base, which is removed; GP1 and TurboM gained the layer_height 0.2 that base supplied, so every preset's resolved settings are unchanged. Removed the orphaned Generic Klipper Printer cover and the unused Turbo-M texture, and renamed TurboM's bed texture to the -texture.svg form the other two models use. * new Goofoo machine and clean profile * Restore library filaments dropped by merges from main * Give the Goofoo Velo+ Tool and 0.2 nozzle fitting processes --------- Co-authored-by: SoftFever <103989404+SoftFever@users.noreply.github.com> Co-authored-by: SoftFever <softfeverever@gmail.com>
106 lines
3.1 KiB
JSON
106 lines
3.1 KiB
JSON
{
|
|
"type": "machine",
|
|
"name": "Goofoo Velo+ 0.6 nozzle",
|
|
"inherits": "fdm_klipper_common",
|
|
"from": "system",
|
|
"setting_id": "Pauu7JRq7u2OD6kv",
|
|
"instantiation": "true",
|
|
"nozzle_diameter": [
|
|
"0.6"
|
|
],
|
|
"nozzle_type": "hardened_steel",
|
|
"printer_model": "Goofoo Velo+",
|
|
"printer_variant": "0.6",
|
|
"default_filament_profile": [
|
|
"Goofoo ABS @System"
|
|
],
|
|
"default_print_profile": "0.30mm Standard @Goofoo Velo+",
|
|
"printable_area": [
|
|
"0x0",
|
|
"600x0",
|
|
"600x500",
|
|
"0x500"
|
|
],
|
|
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
|
"printable_height": "600",
|
|
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0",
|
|
"change_filament_gcode": "PAUSE",
|
|
"deretraction_speed": [
|
|
"0"
|
|
],
|
|
"extruder_clearance_height_to_lid": "350",
|
|
"extruder_clearance_height_to_rod": "60",
|
|
"extruder_clearance_radius": "50",
|
|
"machine_max_acceleration_e": [
|
|
"20000",
|
|
"5000"
|
|
],
|
|
"machine_max_acceleration_retracting": [
|
|
"15000",
|
|
"5000"
|
|
],
|
|
"machine_max_acceleration_z": [
|
|
"100",
|
|
"200"
|
|
],
|
|
"machine_max_jerk_e": [
|
|
"1",
|
|
"2.5"
|
|
],
|
|
"machine_max_jerk_x": [
|
|
"5",
|
|
"9"
|
|
],
|
|
"machine_max_jerk_y": [
|
|
"5",
|
|
"9"
|
|
],
|
|
"machine_max_speed_e": [
|
|
"50",
|
|
"25"
|
|
],
|
|
"machine_max_speed_x": [
|
|
"730",
|
|
"200"
|
|
],
|
|
"machine_max_speed_y": [
|
|
"730",
|
|
"200"
|
|
],
|
|
"machine_max_speed_z": [
|
|
"15",
|
|
"12"
|
|
],
|
|
"machine_start_gcode": "G90 ; 绝对坐标模式\nM83 ; 挤出机相对模式\nM140 S[first_layer_bed_temperature] ; 设置热床温度\nM104 S140 ; 临时喷嘴温度=切片首层设定（防止归零渗料）\nG4 S10 ; 预热等待10秒\nG28 ; 归零所有轴\nG1 Z50 F240 ; Z轴抬升\nG1 X2 Y10 F3000 ; 移动至起始位置\nM104 S[nozzle_temperature_initial_layer] ; 正式设置喷嘴温度（与切片设置一致）\nM190 S[bed_temperature_initial_layer_single] ; 等待热床温度稳定\nM109 S[nozzle_temperature_initial_layer] ; 等待喷嘴温度稳定\nG1 Z0.28 F240 ; 喷嘴下降至打印高度\nG92 E0 ; 挤出机归零\nG1 Y140 E10 F1500 ; 画第一条 priming 线\nG1 X2.3 F5000 ; X轴微调\nG92 E0 ; 挤出机归零\nG1 Y10 E10 F1200 ; 画第二条 priming 线\nG92 E0 ; 最终挤出机归零",
|
|
|
|
"retract_before_wipe": [
|
|
"100%"
|
|
],
|
|
"retract_length_toolchange": [
|
|
"10"
|
|
],
|
|
"retraction_length": [
|
|
"0.5"
|
|
],
|
|
"retraction_minimum_travel": [
|
|
"2"
|
|
],
|
|
"retraction_speed": [
|
|
"50"
|
|
],
|
|
"thumbnails": "300x300/PNG",
|
|
"z_hop": [
|
|
"0"
|
|
],
|
|
"machine_max_acceleration_travel": [
|
|
"10000",
|
|
"10000"
|
|
],
|
|
"max_layer_height": [
|
|
"0.4"
|
|
],
|
|
"min_layer_height": [
|
|
"0.12"
|
|
],
|
|
"upward_compatible_machine": []
|
|
} |