Fix precise wall for Arachne wall generator (#2966)

Update WIKI for it

.github/workflows/build_orca.yml

@@ -4,6 +4,7 @@ on:
     push:
       branches: 
        - main
+       - release/*
       paths:
        - 'src/**'
        - '**/CMakeLists.txt'
@@ -15,6 +16,7 @@ on:
     pull_request:
       branches: 
        - main 
+       - release/*
       paths:
        - 'src/**'
        - '**/CMakeLists.txt'
@@ -224,6 +226,13 @@ jobs:
         with:
           name: OrcaSlicer_Windows_V${{ env.ver }}
           path: ${{ github.workspace }}/build/OrcaSlicer*.exe
+
+      - name: Upload artifacts Win PDB
+        if: matrix.os == 'windows-latest'
+        uses: actions/upload-artifact@v3
+        with:
+          name: OrcaSlicer_Windows_V${{ env.ver }}_pdb
+          path: ${{ github.workspace }}/build/src/Release/*.pdb
 # Ubuntu
 
       - name: Install dependencies

.github/workflows/orca_bot.yml

@@ -0,0 +1,26 @@
+name: Orca bot
+on:
+  schedule:
+    - cron: "0 0 * * *"
+
+jobs:
+  close-issues:
+    runs-on: ubuntu-latest
+    permissions:
+      issues: write
+      pull-requests: write
+    steps:
+      - uses: actions/stale@v5
+        with:
+          days-before-issue-stale: 90
+          days-before-issue-close: 14
+          operations-per-run: 1000
+          stale-issue-label: "stale"
+          ascending: true
+          stale-issue-message: "GitHub bot: this issue is stale because it has been open for 90 days with no activity."
+          close-issue-message: "GitHub bot: This issue was closed because it has been inactive for 14 days since being marked as stale."
+          days-before-pr-stale: -1
+          days-before-pr-close: -1
+          remove-issue-stale-when-updated: true
+          remove-pr-stale-when-updated: true 
+          repo-token: ${{ secrets.GITHUB_TOKEN }}

README.md

@@ -8,7 +8,7 @@ You can download Orca Slicer here: [github releases page](https://github.com/Sof
 # Main features
 - Auto calibrations for all printers
 - Sandwich(inner-outer-inner) mode - an improved version of the `External perimeters first` mode
-- Precise wall
+- [Precise wall](https://github.com/SoftFever/OrcaSlicer/wiki/Precise-wall)
 - Polyholes conversion support [SuperSlicer Wiki: Polyholes](https://github.com/supermerill/SuperSlicer/wiki/Polyholes)
 - Klipper support
 - More granular controls

doc/Auxiliary-fan.md

@@ -1 +1,35 @@
-WIP
+OrcaSlicer use `M106 P2` command to control auxiliary cooling fan.
+
+If you are using Klipper, you can define a `M106` macro to control the both normal part cooling fan and auxiliary fan and exhuast fan.  
+Below is a reference configuration for Klipper.   
+*Note: Don't forget to change the pin name to the actual pin name you are using in the configuration*
+
+```
+# instead of using [fan], we define the default part cooling fan with [fan_generic] here
+# this is the default part cooling fan
+[fan_generic fan0]
+pin: PA7
+cycle_time: 0.01
+hardware_pwm: false
+
+# this is the auxiliary fan
+# comment out it if you don't have auxiliary fan
+[fan_generic fan2]
+pin: PA8
+cycle_time: 0.01
+hardware_pwm: false
+
+# this is the exhaust fan
+# comment out it if you don't have exhaust fan
+[fan_generic fan3]
+pin: PA9
+cycle_time: 0.01
+hardware_pwm: false
+
+[gcode_macro M106]
+gcode:
+    {% set fan = 'fan' + (params.P|int if params.P is defined else 0)|string %}
+    {% set speed = (params.S|int if params.S is defined else 255) %}
+    SET_FAN_SPEED FAN={fan} SPEED={speed}
+
+```

doc/Chamber-temperature.md

@@ -1 +1,52 @@
-WIP...
+OrcaSlicer use `M141/M191` command to control active chamber heater.  
+
+If `Activate temperature control` is checked, OrcaSlicer will insert `M191` command at the beginning of the gcode(before `Machine G-code`).  
+![image](./images/activate_chamber_heater.jpg)  
+*Note: If the machine is equipped with an auxiliary fan, OrcaSlicer will automatically activate the fan during the heating period to help circulate air in the chamber.*  
+
+
+There are two chamber temperature variables available that we can use in `Machine G-code` to control the chamber temperature, if you prefer:  
+To access the chamber temperature set in the first filament, use:  
+`M191 S{chamber_temperature[0]}`  
+To use the overall chamber temperature, which is the highest chamber temperature set across all filaments, use:    
+`M191 S{overall_chamber_temperature}`
+
+
+--------------------------Klipper--------------------------  
+If you are using Klipper, you can define these macros to control the active chamber heater.  
+Bellow is a reference configuration for Klipper.   
+*Note: Don't forget to change the pin name/values to the actual values you are using in the configuration*
+
+```
+[heater_generic chamber_heater]
+heater_pin:PB10
+max_power:1.0
+# Orca note: here the temperature sensor should be the sensor you are using for chamber temperature, not the PTC sensor
+sensor_type:NTC 100K MGB18-104F39050L32
+sensor_pin:PA1
+control = pid
+pid_Kp = 63.418 
+pid_ki = 0.960
+pid_kd = 1244.716
+min_temp:0
+max_temp:70
+
+[gcode_macro M141]
+gcode:
+    SET_HEATER_TEMPERATURE HEATER=chamber_heater TARGET={params.S|default(0)}
+
+[gcode_macro M191]
+gcode:
+    {% set s = params.S|float %}
+    {% if s == 0 %}
+        # If target temperature is 0, do nothing
+        M117 Chamber heating cancelled
+    {% else %}
+        SET_HEATER_TEMPERATURE HEATER=chamber_heater TARGET={s}
+        # Orca: uncomment the following line if you want to use heat bed to assist chamber heating
+        # M140 S100
+        TEMPERATURE_WAIT SENSOR="heater_generic chamber_heater" MINIMUM={s-1} MAXIMUM={s+1}
+        M117 Chamber at target temperature
+    {% endif %}
+
+```

doc/Precise-wall.md

@@ -0,0 +1,13 @@
+The 'Precise Wall' is a distinctive feature introduced by OrcaSlicer, aimed at improving the dimensional accuracy of prints and minimizing layer inconsistencies by slightly increasing the spacing between the outer wall and the inner wall.
+
+Below is a technical explanation of how this feature works. 
+First, it's important to understand some basic concepts like flow, extrusion width, and space. Slic3r has an excellent document that covers these topics in detail. You can refer to this article: [link to article](https://manual.slic3r.org/advanced/flow-math).
+
+Now, let's dive into the specifics. Slic3r and its forks, such as PrusaSlicer, SuperSlicer, and OrcaSlicer, assume that the extrusion path has an oval shape, which accounts for the overlaps. For example, if we set the wall width to 0.4mm and the layer height to 0.2mm, the combined thickness of two walls laid side by side is 0.714mm instead of 0.8mm due to the overlapping.
+![image](https://github.com/SoftFever/OrcaSlicer/assets/103989404/924d8df8-992c-4d55-b97d-fb85455fab5b)
+This approach enhances the strength of 3D-printed parts. However, it does have some side effects. For instance, when the inner-outer wall order is used, the outer wall can be pushed outside, leading to potential size inaccuracy and more layer inconsistency.
+
+It's important to keep in mind that this approach to handling flow is specific to Slic3r and it's forks. Other slicing software, such as Cura, assumes that the extrusion path is rectangular and, therefore, does not include overlapping. Two 0.4 mm walls will result in a 0.8 mm shell thickness in Cura
+
+OrcaSlicer adheres to Slic3r's approach to handling flow. To address the downsides mentioned earlier, OrcaSlicer introduced the 'Precise Wall' feature. When this feature is enabled in OrcaSlicer, the overlap between the outer wall and its adjacent inner wall is set to zero. This ensures that the overall strength of the printed part is unaffected, while the size accuracy and layer consistency are improved.
+

doc/Print-settings.md

@@ -4,4 +4,5 @@ Print settings:
 * [Axiliary fan](auxiliary-fan)
 * [Chamber temperature](chamber-temperature)
 * [Air filtration/Exhaust fan](air-filtration)
-* [Single Extruder Multimaterial](semm)
+* [Single Extruder Multimaterial](semm)
+* [Precise wall](Precise-wall)

doc/air-filtration.md

@@ -1 +1,35 @@
-WIP
+OrcaSlicer use `M106 P3` command to control air-filtration/exhuast fan.
+
+If you are using Klipper, you can define a `M106` macro to control the both normal part cooling fan and auxiliary fan and exhuast fan.  
+Below is a reference configuration for Klipper.   
+*Note: Don't forget to change the pin name to the actual pin name you are using in the configuration*
+
+```
+# instead of using [fan], we define the default part cooling fan with [fan_generic] here
+# this is the default part cooling fan
+[fan_generic fan0]
+pin: PA7
+cycle_time: 0.01
+hardware_pwm: false
+
+# this is the auxiliary fan
+# comment out it if you don't have auxiliary fan
+[fan_generic fan2]
+pin: PA8
+cycle_time: 0.01
+hardware_pwm: false
+
+# this is the exhaust fan
+# comment out it if you don't have exhaust fan
+[fan_generic fan3]
+pin: PA9
+cycle_time: 0.01
+hardware_pwm: false
+
+[gcode_macro M106]
+gcode:
+    {% set fan = 'fan' + (params.P|int if params.P is defined else 0)|string %}
+    {% set speed = (params.S|int if params.S is defined else 255) %}
+    SET_FAN_SPEED FAN={fan} SPEED={speed}
+
+```

localization/i18n/OrcaSlicer.pot

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-11-04 14:18+0800\n"
+"POT-Creation-Date: 2023-12-02 01:44+0800\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -489,27 +489,12 @@ msgstr ""
 msgid "Remove selection"
 msgstr ""
 
-msgid "Shift + Mouse move up or dowm"
-msgstr ""
-
-msgid "Rotate text"
-msgstr ""
-
-msgid "Text shape"
-msgstr ""
-
 msgid "Font"
 msgstr ""
 
 msgid "Thickness"
 msgstr ""
 
-msgid "Input text"
-msgstr ""
-
-msgid "Embeded"
-msgstr ""
-
 msgid "Text Gap"
 msgstr ""
 
@@ -521,12 +506,24 @@ msgid ""
 "depth"
 msgstr ""
 
+msgid "Input text"
+msgstr ""
+
 msgid "Surface"
 msgstr ""
 
 msgid "Horizontal text"
 msgstr ""
 
+msgid "Shift + Mouse move up or dowm"
+msgstr ""
+
+msgid "Rotate text"
+msgstr ""
+
+msgid "Text shape"
+msgstr ""
+
 msgid "Ctrl+"
 msgstr ""
 
@@ -608,11 +605,6 @@ msgstr ""
 msgid "WebView2 Runtime"
 msgstr ""
 
-msgid ""
-"OrcaSlicer configuration file may be corrupted and is not abled to be parsed."
-"Please delete the file and try again."
-msgstr ""
-
 #, possible-c-format, possible-boost-format
 msgid ""
 "%s\n"
@@ -638,6 +630,13 @@ msgstr ""
 msgid "Info"
 msgstr ""
 
+msgid ""
+"The OrcaSlicer configuration file may be corrupted and cannot be parsed.\n"
+"OrcaSlicer has attempted to recreate the configuration file.\n"
+"Please note, application settings will be lost, but printer profiles will "
+"not be affected."
+msgstr ""
+
 msgid "Rebuild"
 msgstr ""
 
@@ -4325,24 +4324,6 @@ msgstr ""
 msgid "The 3mf is generated by old Orca Slicer, load geometry data only."
 msgstr ""
 
-#, possible-c-format, possible-boost-format
-msgid ""
-"The 3mf's version %s is newer than %s's version %s, Found following keys "
-"unrecognized:"
-msgstr ""
-
-msgid "You'd better upgrade your software.\n"
-msgstr ""
-
-msgid "Newer 3mf version"
-msgstr ""
-
-#, possible-c-format, possible-boost-format
-msgid ""
-"The 3mf's version %s is newer than %s's version %s, Suggest to upgrade your "
-"software."
-msgstr ""
-
 msgid "Invalid values found in the 3mf:"
 msgstr ""
 
@@ -5769,6 +5750,9 @@ msgstr ""
 msgid "Change filament G-code"
 msgstr ""
 
+msgid "Change extrusion role G-code"
+msgstr ""
+
 msgid "Pause G-code"
 msgstr ""
 
@@ -7119,6 +7103,15 @@ msgid ""
 "material for bridge, to improve sag"
 msgstr ""
 
+msgid "Internal bridge flow"
+msgstr ""
+
+msgid ""
+"This value governs the thickness of the internal bridge layer. This is the "
+"first layer over sparse infill. Decrease this value slightly (for example "
+"0.9) to improve surface quality over sparse infill."
+msgstr ""
+
 msgid "Top surface flow ratio"
 msgstr ""
 
@@ -7390,6 +7383,15 @@ msgid ""
 "shorter bridged distances."
 msgstr ""
 
+msgid "Thick internal bridges"
+msgstr ""
+
+msgid ""
+"If enabled, thick internal bridges will be used. It's usually recommended to "
+"have this feature turned on. However, consider turning it off if you are "
+"using large nozzles."
+msgstr ""
+
 msgid "Max bridge length"
 msgstr ""
 
@@ -7408,6 +7410,14 @@ msgstr ""
 msgid "End G-code when finish the printing of this filament"
 msgstr ""
 
+msgid "Ensure vertical shell thickness"
+msgstr ""
+
+msgid ""
+"Add solid infill near sloping surfaces to guarantee the vertical shell "
+"thickness (top+bottom solid layers)"
+msgstr ""
+
 msgid "Top surface pattern"
 msgstr ""
 
@@ -9432,6 +9442,9 @@ msgid ""
 "tool change"
 msgstr ""
 
+msgid "This gcode is inserted when the extrusion role is changed"
+msgstr ""
+
 msgid ""
 "Line width for top surfaces. If expressed as a %, it will be computed over "
 "the nozzle diameter."
@@ -9727,6 +9740,15 @@ msgid ""
 "itself. It's expressed as a percentage over nozzle diameter"
 msgstr ""
 
+msgid "Detect narrow internal solid infill"
+msgstr ""
+
+msgid ""
+"This option will auto detect narrow internal solid infill area. If enabled, "
+"concentric pattern will be used for the area to speed printing up. "
+"Otherwise, rectilinear pattern is used defaultly."
+msgstr ""
+
 msgid "invalid value "
 msgstr ""
 

localization/i18n/cs/OrcaSlicer_cs.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-11-04 14:18+0800\n"
+"POT-Creation-Date: 2023-12-02 01:44+0800\n"
 "PO-Revision-Date: 2023-09-30 15:15+0200\n"
 "Last-Translator: René Mošner <Renemosner@seznam.cz>\n"
 "Language-Team: \n"
@@ -497,27 +497,12 @@ msgstr "Malování pozice švu"
 msgid "Remove selection"
 msgstr "Odebrat výběr"
 
-msgid "Shift + Mouse move up or dowm"
-msgstr "Shift + pohyb myši nahoru nebo dolů"
-
-msgid "Rotate text"
-msgstr "Otočit text"
-
-msgid "Text shape"
-msgstr "Tvar textu"
-
 msgid "Font"
 msgstr "Písmo"
 
 msgid "Thickness"
 msgstr "Tloušťka"
 
-msgid "Input text"
-msgstr "Vložit text"
-
-msgid "Embeded"
-msgstr "Vloženo"
-
 msgid "Text Gap"
 msgstr "Mezera v textu"
 
@@ -531,12 +516,24 @@ msgstr ""
 "Vloženo\n"
 "hloubka"
 
+msgid "Input text"
+msgstr "Vložit text"
+
 msgid "Surface"
 msgstr "Povrch"
 
 msgid "Horizontal text"
 msgstr "Vodorovný text"
 
+msgid "Shift + Mouse move up or dowm"
+msgstr "Shift + pohyb myši nahoru nebo dolů"
+
+msgid "Rotate text"
+msgstr "Otočit text"
+
+msgid "Text shape"
+msgstr "Tvar textu"
+
 msgid "Ctrl+"
 msgstr "Ctrl+"
 
@@ -628,13 +625,6 @@ msgstr ""
 msgid "WebView2 Runtime"
 msgstr "WebView2 Runtime"
 
-msgid ""
-"OrcaSlicer configuration file may be corrupted and is not abled to be parsed."
-"Please delete the file and try again."
-msgstr ""
-"Konfigurační soubor OrcaSlicer může být poškozen a nelze jej analyzovat."
-"Smažte soubor a zkuste to znovu."
-
 #, c-format, boost-format
 msgid ""
 "%s\n"
@@ -662,6 +652,18 @@ msgstr "Toto je nejnovější verze."
 msgid "Info"
 msgstr "Info"
 
+msgid ""
+"The OrcaSlicer configuration file may be corrupted and cannot be parsed.\n"
+"OrcaSlicer has attempted to recreate the configuration file.\n"
+"Please note, application settings will be lost, but printer profiles will "
+"not be affected."
+msgstr ""
+"Soubor konfigurace programu OrcaSlicer může být poškozen a nelze ho "
+"analyzovat.\n"
+"OrcaSlicer se pokusil znovu vytvořit konfigurační soubor.\n"
+"Všimněte si, že nastavení aplikace bude ztraceno, ale profily tiskárny "
+"nebudou ovlivněny."
+
 msgid "Rebuild"
 msgstr "Obnovit"
 
@@ -1787,10 +1789,10 @@ msgid "An SD card needs to be inserted before printing via LAN."
 msgstr "Před tiskem přes LAN je třeba vložit SD kartu."
 
 msgid "Sending gcode file over LAN"
-msgstr "Odesílání souboru gcode přes LAN"
+msgstr "Odesílání souboru gkód přes LAN"
 
 msgid "Sending gcode file to sdcard"
-msgstr "Odesílání souboru gcode na sdcard"
+msgstr "Odesílání souboru gkód na sd kartu"
 
 #, c-format, boost-format
 msgid "Successfully sent. Close current page in %s s"
@@ -2181,7 +2183,7 @@ msgid ""
 "(Currently supporting automatic supply of consumables with the same brand, "
 "material type, and color)"
 msgstr ""
-"Pokud v AMS existují dva identické filameny, bude povolena záloha AMS "
+"Pokud v AMS existují dva identické filamenty, bude povolena záloha AMS "
 "filamentu. \n"
 "(Aktuálně podporuje automatické doplňování spotřebního materiálu stejné "
 "značky, typu materiálu a barvy)"
@@ -2333,7 +2335,7 @@ msgid ""
 "Error message: %1%.\n"
 "Source file %2%."
 msgstr ""
-"Soubor gcode se nepodařilo uložit.\n"
+"Soubor gkód se nepodařilo uložit.\n"
 "Chybová zpráva: %1%.\n"
 "Zdrojový soubor %2%."
 
@@ -2524,7 +2526,7 @@ msgstr ""
 "typ časosběru je tradiční."
 
 msgid " But machines with I3 structure will not generate timelapse videos."
-msgstr " Ale stroje s I3 strukturou nevytvoří timelapse videa."
+msgstr " Ale stroje s I3 strukturou nevytvářejí časosběrná videa."
 
 msgid ""
 "Change these settings automatically? \n"
@@ -2645,7 +2647,7 @@ msgid "Calibrating the micro lida"
 msgstr "Kalibrace mikro lida"
 
 msgid "Calibrating extrusion flow"
-msgstr "Kalibrace extruze průtpku"
+msgstr "Kalibrace extruze průtoku"
 
 msgid "Paused due to nozzle temperature malfunction"
 msgstr "Pozastaveno kvůli poruše teploty trysky"
@@ -3449,7 +3451,7 @@ msgid "Export current sliced file"
 msgstr "Exportovat aktuální Slicovaný soubor"
 
 msgid "Export all plate sliced file"
-msgstr "Exportovat všechny soubor slicované na pdložce"
+msgstr "Exportovat všechny soubor slicované na podložce"
 
 msgid "Export G-code"
 msgstr "Exportovat G-kód"
@@ -4132,7 +4134,7 @@ msgid " upload config prase failed\n"
 msgstr " nahrávání konfigurace se nepodařilo zpracovat\n"
 
 msgid " No corresponding storage bucket\n"
-msgstr " Žádný odpovídající úložný bucket\n"
+msgstr " Žádný odpovídající úložný prostor\n"
 
 msgid " can not be opened\n"
 msgstr " nelze otevřít\n"
@@ -4366,7 +4368,7 @@ msgid ""
 "The application cannot run normally because OpenGL version is lower than "
 "2.0.\n"
 msgstr ""
-"Aplikace nemůže běžet normálně, protože máte nižší verzi OpenGLnež 2.0.\n"
+"Aplikace nemůže běžet normálně, protože máte nižší verzi OpenGL než 2.0.\n"
 
 msgid "Please upgrade your graphics card driver."
 msgstr "Prosím aktualizujte ovladač grafické karty."
@@ -4619,28 +4621,6 @@ msgstr "Nelze načíst konfiguraci."
 msgid "The 3mf is generated by old Orca Slicer, load geometry data only."
 msgstr "3mf je generován starým Orca Slicerem, načtěte pouze geometrická data."
 
-#, c-format, boost-format
-msgid ""
-"The 3mf's version %s is newer than %s's version %s, Found following keys "
-"unrecognized:"
-msgstr ""
-"Verze 3mf %s je novější než verze %s %s, byly nalezeny následující klíče "
-"nerozpoznaný:"
-
-msgid "You'd better upgrade your software.\n"
-msgstr "Měli byste aktualizovat software.\n"
-
-msgid "Newer 3mf version"
-msgstr "Novější verze 3mf"
-
-#, c-format, boost-format
-msgid ""
-"The 3mf's version %s is newer than %s's version %s, Suggest to upgrade your "
-"software."
-msgstr ""
-"Verze %s zařízení 3mf je novější než verze %s %s, navrhněte upgrade vašeho "
-"software."
-
 msgid "Invalid values found in the 3mf:"
 msgstr "V 3mf byly nalezeny neplatné hodnoty:"
 
@@ -4808,7 +4788,7 @@ msgid ""
 "The loaded file contains gcode only, Can not enter the Prepare page"
 msgstr ""
 "Režim pouze náhled:\n"
-"Načtený soubor obsahuje pouze gcode, nelze vstoupit na stránku Příprava"
+"Načtený soubor obsahuje pouze gkód, nelze vstoupit na stránku Příprava"
 
 msgid "You can keep the modified presets to the new project or discard them"
 msgstr "Upravené předvolby si můžete ponechat pro nový projekt nebo je zahodit"
@@ -4914,7 +4894,7 @@ msgid "The following characters are not allowed by a FAT file system:"
 msgstr "Následující znaky nejsou v souborovém systému FAT povoleny:"
 
 msgid "Save Sliced file as:"
-msgstr "Uložit Slicované soubor jako:"
+msgstr "Uložit Slicovaný soubor jako:"
 
 #, c-format, boost-format
 msgid ""
@@ -4932,7 +4912,7 @@ msgstr ""
 "kladné části."
 
 msgid "Is the printer ready? Is the print sheet in place, empty and clean?"
-msgstr "Je tiskarna připravená k tisku? Je podložka prázdná a čistá?"
+msgstr "Je tiskárna připravená k tisku? Je podložka prázdná a čistá?"
 
 msgid "Upload and Print"
 msgstr "Nahrát a Tisknout"
@@ -6204,6 +6184,9 @@ msgstr "Časosběrný G-kód"
 msgid "Change filament G-code"
 msgstr "G-kód Změny filamentu"
 
+msgid "Change extrusion role G-code"
+msgstr "Změnit G-kód pro úlohu extruze"
+
 msgid "Pause G-code"
 msgstr "G-kód Pauzy"
 
@@ -6226,7 +6209,7 @@ msgid "Jerk limitation"
 msgstr "Omezení Jerk-Ryv"
 
 msgid "Single extruder multimaterial setup"
-msgstr "Nastavení multimaterialu s jedním extruderem"
+msgstr "Nastavení multimateriálu s jedním extruderem"
 
 msgid "Wipe tower"
 msgstr "Čistící věž"
@@ -6558,7 +6541,7 @@ msgid "Login"
 msgstr "Přihlášení"
 
 msgid "The configuration package is changed in previous Config Guide"
-msgstr "Konfigurační balíček byl změněn v předchozím Config Guide"
+msgstr "Konfigurační balíček byl změněn v předchozím průvodci konfigurací"
 
 msgid "Configuration package changed"
 msgstr "Konfigurační balíček změněn"
@@ -7716,6 +7699,15 @@ msgstr ""
 "Snižte tuto hodnotu mírně (například 0,9), abyste snížili množství materiálu "
 "pro most a zlepšili prověšení"
 
+msgid "Internal bridge flow"
+msgstr ""
+
+msgid ""
+"This value governs the thickness of the internal bridge layer. This is the "
+"first layer over sparse infill. Decrease this value slightly (for example "
+"0.9) to improve surface quality over sparse infill."
+msgstr ""
+
 msgid "Top surface flow ratio"
 msgstr "Poměr průtoku horní vrstvy"
 
@@ -8038,6 +8030,15 @@ msgstr ""
 "Pokud je zakázáno, mosty vypadají lépe, ale jsou spolehlivé jen pro kratší "
 "přemostění."
 
+msgid "Thick internal bridges"
+msgstr ""
+
+msgid ""
+"If enabled, thick internal bridges will be used. It's usually recommended to "
+"have this feature turned on. However, consider turning it off if you are "
+"using large nozzles."
+msgstr ""
+
 msgid "Max bridge length"
 msgstr "Maximální délka mostu"
 
@@ -8059,6 +8060,16 @@ msgstr "Konec G-kód po dokončení celého tisku"
 msgid "End G-code when finish the printing of this filament"
 msgstr "Konec G-kód po dokončení tisku tohoto filamentu"
 
+msgid "Ensure vertical shell thickness"
+msgstr "Zajistit tloušťku svislých stěn"
+
+msgid ""
+"Add solid infill near sloping surfaces to guarantee the vertical shell "
+"thickness (top+bottom solid layers)"
+msgstr ""
+"Přidá plnou výplň u šikmých ploch pro garanci tloušťky svislých stěn "
+"(vrchních a spodních plných vrstev)"
+
 msgid "Top surface pattern"
 msgstr "Vzor horního povrchu"
 
@@ -8211,7 +8222,7 @@ msgid ""
 msgstr ""
 "Materiál může mít objemovou změnu po přepnutí mezi roztaveným a krystalickým "
 "stavem. Toto nastavení proporcionálně změní veškerý vytlačovací tok tohoto "
-"filamentu v gcode. Doporučený rozsah hodnot je mezi 0,95 a 1,05. Možná "
+"filamentu v gkódu. Doporučený rozsah hodnot je mezi 0,95 a 1,05. Možná "
 "můžete tuto hodnotu vyladit, abyste získali pěkně rovný povrch, když dochází "
 "k mírnému přetečení nebo podtečení"
 
@@ -8313,8 +8324,8 @@ msgid ""
 "Filament diameter is used to calculate extrusion in gcode, so it's important "
 "and should be accurate"
 msgstr ""
-"Průměr filamentu se používá k výpočtu vytlačování v gcode, takže je důležitý "
-"a měl by být přesný"
+"Průměr filamentu se používá k výpočtu extruze v gkódu, takže je důležitý a "
+"měl by být přesný"
 
 msgid "Shrinkage"
 msgstr "Smrštění"
@@ -8327,7 +8338,7 @@ msgid ""
 "Be sure to allow enough space between objects, as this compensation is done "
 "after the checks."
 msgstr ""
-"Zadejte procento smrštění, které filament získá po ochlazení (94%      pokud "
+"Zadejte procento smrštění, které filament získá po ochlazení (94% i pokud "
 "naměříte 94mm místo 100mm). Část bude pro kompenzaci zmenšena v xy. Bere se "
 "v úvahu pouze filamentu použit pro obvod.\n"
 "Ujistěte se aby byl mezi objekty dostatek prostoru, protože tato kompenzace "
@@ -8421,7 +8432,7 @@ msgid ""
 msgstr ""
 "Doba, po kterou firmware tiskárny (nebo jednotka Multi Material 2.0) zavádí "
 "nový filament během jeho výměny (při provádění kódu T). Tento čas je přidán "
-"k celkové době tisku pomocí G-code odhadovače tiskového času."
+"k celkové době tisku pomocí G-kódu odhadovače tiskového času."
 
 msgid "Ramming parameters"
 msgstr "Parametry rapidní extruze"
@@ -8440,7 +8451,7 @@ msgid ""
 msgstr ""
 "Doba, po kterou firmware tiskárny (nebo jednotka Multi Material 2.0) vysouvá "
 "filament během jeho výměny (při provádění kódu T). Tento čas je přidán k "
-"celkové době tisku pomocí G-code odhadovače tiskového času."
+"celkové době tisku pomocí G-kódu odhadovače tiskového času."
 
 msgid "Enable ramming for multitool setups"
 msgstr "Povolení rapidní extruze tiskárny s více nástroji"
@@ -9027,7 +9038,7 @@ msgid "G-code flavor"
 msgstr "Druh G-kódu"
 
 msgid "What kind of gcode the printer is compatible with"
-msgstr "S jakým typem gcode je tiskárna kompatibilní"
+msgstr "S jakým typem gkódu je tiskárna kompatibilní"
 
 msgid "Klipper"
 msgstr "Klipper"
@@ -9145,8 +9156,8 @@ msgid ""
 "layer height. Too high value results in overextrusion on the surface"
 msgstr ""
 "Množství materiálu, které se má vytlačit během žehlení. V poměru k průtoku "
-"normální výšky vrstvy. Příliš vysoká hodnota vede k nadměrnému vytlačování "
-"na povrchu"
+"normální výšky vrstvy. Příliš vysoká hodnota vede k nadměrné extruzi na "
+"povrchu"
 
 msgid "Ironing line spacing"
 msgstr "Řádkování žehlení"
@@ -9171,7 +9182,7 @@ msgstr ""
 "použije výchozí metodu."
 
 msgid "This gcode part is inserted at every layer change after lift z"
-msgstr "Tato část gcode je vložena při každé změně vrstvy po zvednutí z"
+msgstr "Tato část gkódu je vložena při každé změně vrstvy po zvednutí z"
 
 msgid "Supports silent mode"
 msgstr "Podporuje tichý režim"
@@ -9188,7 +9199,7 @@ msgid ""
 "pause G-code in gcode viewer"
 msgstr ""
 "Tento G-kód bude použit jako kód pro pozastavený tisk. Uživatel může vložit "
-"pauzu G-kód do prohlížeče gcode"
+"pauzu G-kód do prohlížeče gkódu"
 
 msgid "This G-code will be used as a custom code"
 msgstr "Tento G-kód bude použit jako vlastní kód"
@@ -9317,7 +9328,7 @@ msgstr ""
 "maximální výšky vrstvy při povolení adaptivní výšky vrstvy"
 
 msgid "Extrusion rate smoothing"
-msgstr "Zjemňování extruze"
+msgstr "Vyhlazení rychlosti extruze"
 
 msgid ""
 "This parameter smooths out sudden extrusion rate changes that happen when "
@@ -9347,32 +9358,31 @@ msgid ""
 "\n"
 "Note: this parameter disables arc fitting."
 msgstr ""
-"Tento parametr zjemňuje náhlé změny extruzního toku, ke kterým dochází při "
-"přechodu tiskárny z tisku s vysokým průtokem (vysokou rychlostí/větší "
-"šířkou) extruze na tisk s nižším průtokem (nižší rychlostí/menší šířkou) "
-"extruze a obráceně.\n"
+"Tato hodnota vyhlazuje náhlé změny extruzní rychlosti, které nastávají, když "
+"tiskárna přechází z extruze s vysokým průtokem (vysoká rychlost/větší šířka) "
+"na extruzi s nižším průtokem (nižší rychlost/menší šířka) a naopak.\n"
 "\n"
-"Definuje maximální rychlost, jakou se může objemový průtok extrudovaný v mm3/"
-"s měnit v čase. Vyšší hodnoty znamenají, že jsou povoleny vyšší změny "
-"extruzní rychlosti, což vede k rychlejším přechodům rychlosti.\n"
+"Definuje maximální rychlost, kterou může objemový průtok extrudovaného "
+"materiálu v mm3/s měnit v čase. Vyšší hodnoty znamenají, že jsou povoleny "
+"větší změny extruzní rychlosti, což vede k rychlejším přechodům rychlosti.\n"
 "\n"
-"Hodnota 0 tuto funkci vypíná. \n"
+"Hodnota 0 funkci zakáže. \n"
 "\n"
-"Pro tiskárny s vysokou rychlostí a vysokým průtokem přímého pohonu (např. "
-"Bambu lab nebo Voron) tato hodnota obvykle není potřebná. Avšak v některých "
-"případech, kdy se rychlosti prvků velmi liší, může poskytnout marginální "
-"přínos. Například při agresivním zpomalení kvůli přesahům. V těchto "
+"Pro tiskárny s přímým pohonem a vysokou rychlostí a průtokem (např. Bambu "
+"lab nebo Voron) tato hodnota obvykle není potřebná. Nicméně v některých "
+"případech, kde se rychlosti funkcí výrazně liší, může poskytnout marginální "
+"přínos. Například při agresivních zpomaleních způsobených přesahy. V těchto "
 "případech se doporučuje vysoká hodnota kolem 300-350 mm3/s2, protože to "
-"umožní právě dostatečné zjemnění pro pomoc předstihu tlaku (PA) k dosažení "
-"plynulejšího přechodu průtoku.\n"
+"umožňuje dostatečné vyhlazení pro pomoc při dosažení plynulejšího přechodu "
+"tlaku při extruzi.\n"
 "\n"
-"Pro pomalejší tiskárny bez předstihu tlaku (PA) by měla být hodnota "
-"nastavena mnohem nižší. Pro extrudery s přímým pohonem je dobrým výchozím "
-"bodem hodnota 10-15 mm3/s2 a pro styl Bowden 5-10 mm3/s2. \n"
+"Pro pomalejší tiskárny bez tlakového předstihu by měla být hodnota nastavena "
+"mnohem nižší. Pro přímé pohony je hodnota 10-15 mm3/s2 dobrým výchozím "
+"bodem, a pro styl Bowden 5-10 mm3/s2. \n"
 "\n"
-"Tato funkce je známá jako Pressure Equalizer v Prusa slicer.\n"
+"Tato funkce je známa jako Pressure Equalizer v programu Prusa Slicer.\n"
 "\n"
-"Poznámka: Tento parametr vypíná arc fitting."
+"Poznámka: Tato hodnota zakazuje obloukové přizpůsobení."
 
 msgid "mm³/s²"
 msgstr "mm³/s²"
@@ -9659,7 +9669,7 @@ msgid ""
 "resolution and more time to slice"
 msgstr ""
 "Cesta G-kódu se generuje po zjednodušení obrysu modelu, aby se předešlo "
-"příliš velkému počtu bodů a Linek gcode v souboru gcode. Menší hodnota "
+"příliš velkému počtu bodů a Linek gkódu v souboru gkód. Menší hodnota "
 "znamená vyšší rozlišení a více času na slicování"
 
 msgid "Travel distance threshold"
@@ -9670,7 +9680,7 @@ msgid ""
 "threshold"
 msgstr ""
 "Spusťte retrakci pouze tehdy, když je dráha jízdy delší než tato hraniční "
-"hohnota"
+"hodnota"
 
 msgid "Retract amount before wipe"
 msgstr "Délka retrakce před očištěním"
@@ -9827,7 +9837,7 @@ msgid "Random"
 msgstr "Náhodný"
 
 msgid "Staggered inner seams"
-msgstr "Posunuté vnitřní švy"
+msgstr "Odstupňované vnitřní švy"
 
 msgid ""
 "This option causes the inner seams to be shifted backwards based on their "
@@ -9858,9 +9868,9 @@ msgid ""
 "if a wipe action is executed immediately following an outer wall extrusion, "
 "the speed of the outer wall extrusion will be utilized for the wipe action."
 msgstr ""
-"Rychlost čištění je určena rychlostí aktuální role vytlačování, např. pokud "
-"je činnost čištění provedena bezprostředně po vytlačování vnější stěny, "
-"rychlost vytlačování vnější stěny bude využita pro činnost čištění."
+"Rychlost čištění je určena rychlostí aktuální role extruze, např. pokud je "
+"činnost čištění provedena bezprostředně po extruzi vnější stěny, rychlost "
+"extruze vnější stěny bude využita pro činnost čištění."
 
 msgid "Wipe on loops"
 msgstr "Čistit na smyčce"
@@ -9869,8 +9879,8 @@ msgid ""
 "To minimize the visibility of the seam in a closed loop extrusion, a small "
 "inward movement is executed before the extruder leaves the loop."
 msgstr ""
-"Aby byla minimalizována viditelnost švu při vytlačování s uzavřenou smyčkou, "
-"je proveden malý pohyb dovnitř předtím, než vytlačovací stroj opustí smyčku."
+"Aby byla minimalizována viditelnost švu při extruzi s uzavřenou smyčkou, je "
+"proveden malý pohyb dovnitř předtím, než vytlačovací stroj opustí smyčku."
 
 msgid "Wipe speed"
 msgstr "Rychlost čištění"
@@ -9915,7 +9925,7 @@ msgid ""
 "The printing speed in exported gcode will be slowed down, when the estimated "
 "layer time is shorter than this value, to get better cooling for these layers"
 msgstr ""
-"Rychlost tisku v exportovaném kódu gcode se zpomalí, když je odhadovaná doba "
+"Rychlost tisku v exportovaném kódu gkód se zpomalí, když je odhadovaná doba "
 "vrstvy kratší než tato hodnota, aby se dosáhlo lepšího chlazení pro tyto "
 "vrstvy"
 
@@ -10079,7 +10089,7 @@ msgid ""
 "print bed, set this to -0.3 (or fix your endstop)."
 msgstr ""
 "Tato hodnota bude přidána (nebo odečtena) ze všech souřadnic Z ve výstupním "
-"G-code. Používá se ke kompenzování špatné pozice endstopu Z. Například pokud "
+"G-kódu. Používá se ke kompenzování špatné pozice endstopu Z. Například pokud "
 "endstop 0 skutečně ponechá trysku 0,3 mm daleko od tiskové podložky, "
 "nastavte hodnotu -0,3 (nebo dolaďte svůj koncový doraz)."
 
@@ -10273,7 +10283,7 @@ msgstr ""
 "ušetří materiál a sníží poškození objektu.\n"
 "Pro stromovou podpěru, tenký a organický styl bude agresivněji slučovat "
 "větve a ušetří mnoho materiálu (výchozí organický), zatímco hybridní styl "
-"vytvoří podobnou strukturu jako běžná podpěra pod velkými plochými převiy."
+"vytvoří podobnou strukturu jako běžná podpěra pod velkými plochými převisy."
 
 msgid "Snug"
 msgstr "Přiléhavý"
@@ -10380,7 +10390,7 @@ msgstr ""
 "automaticky vypočítány"
 
 msgid "Tree support brim width"
-msgstr "Šířka Limce podpěr stromů"
+msgstr "Šířka Límce podpěr stromů"
 
 msgid "Distance from tree branch to the outermost brim line"
 msgstr "Vzdálenost od větve stromu k nejvzdálenější linii Límce"
@@ -10396,7 +10406,7 @@ msgid "Tree support branch diameter"
 msgstr "Průměr větve podpěr stromů"
 
 msgid "This setting determines the initial diameter of support nodes."
-msgstr "Toto nastavení určuje počáteční průměr uzlů poděry."
+msgstr "Toto nastavení určuje počáteční průměr uzlů podpěr."
 
 #. TRN PrintSettings: #lmFIXME
 msgid "Branch Diameter Angle"
@@ -10491,9 +10501,12 @@ msgid ""
 "This gcode is inserted when change filament, including T command to trigger "
 "tool change"
 msgstr ""
-"Tento gcode se vloží při výměně filamentu, včetně příkazu T ke spuštění "
+"Tento gkód se vloží při výměně filamentu, včetně příkazu T ke spuštění "
 "výměny nástroje"
 
+msgid "This gcode is inserted when the extrusion role is changed"
+msgstr "Tento G-kód je vložen při změně role extruze"
+
 msgid ""
 "Line width for top surfaces. If expressed as a %, it will be computed over "
 "the nozzle diameter."
@@ -10545,9 +10558,9 @@ msgid ""
 "Move nozzle along the last extrusion path when retracting to clean leaked "
 "material on nozzle. This can minimize blob when print new part after travel"
 msgstr ""
-"Při zasouvání přesuňte trysku podél poslední dráhy vytlačování, abyste "
-"vyčistili uniklý materiál na trysce. To může minimalizovat skvrny při tisku "
-"nového dílu po cestě"
+"Při retrakci přesuňte trysku podél poslední dráhy extruze, abyste vyčistili "
+"uniklý materiál na trysce. To může minimalizovat skvrny při tisku nového "
+"dílu po cestě"
 
 msgid "Wipe Distance"
 msgstr "Vzdálenost čištění"
@@ -10762,10 +10775,10 @@ msgid ""
 "Wipe tower is only compatible with relative mode. It is always enabled on "
 "BambuLab printers. Default is checked"
 msgstr ""
-"Při použití volby \"label_objects\" se doporučuje relativní vytlačování. "
-"Některé extrudery fungují lépe, když je tato možnost odškrtnuta (režim "
-"absolutního vytlačování). Čistící věž je kompatibilní pouze s relativním "
-"režimem. Na tiskárnách BambuLab je vždy povolen. Výchozí je zaškrtnuto"
+"Při použití volby \"label_objects\" se doporučuje relativní extruzi. Některé "
+"extrudery fungují lépe, když je tato možnost odškrtnuta (režim absolutní "
+"extruze). Čistící věž je kompatibilní pouze s relativním režimem. Na "
+"tiskárnách BambuLab je vždy povolen. Výchozí je zaškrtnuto"
 
 msgid ""
 "Classic wall generator produces walls with constant extrusion width and for "
@@ -10795,7 +10808,7 @@ msgstr ""
 "Vyjadřuje se jako procento průměru trysky"
 
 msgid "Wall transitioning filter margin"
-msgstr "Okraj filtru přechodu stěny"
+msgstr "Filtr přechodového rozpětí stěny"
 
 msgid ""
 "Prevent transitioning back and forth between one extra wall and one less. "
@@ -10830,7 +10843,7 @@ msgstr ""
 "mezery nebo přečnívat"
 
 msgid "Wall distribution count"
-msgstr "Počet rozložení stěn"
+msgstr "Počet ovlivněných stěn"
 
 msgid ""
 "The number of walls, counted from the center, over which the variation needs "
@@ -10879,6 +10892,18 @@ msgstr ""
 "stejně tlustá jako prvek samotný. Vyjadřuje se jako procento nad průměr "
 "trysky"
 
+msgid "Detect narrow internal solid infill"
+msgstr "Detekovat úzkou vnitřní plnou výplň"
+
+msgid ""
+"This option will auto detect narrow internal solid infill area. If enabled, "
+"concentric pattern will be used for the area to speed printing up. "
+"Otherwise, rectilinear pattern is used defaultly."
+msgstr ""
+"Tato možnost automaticky rozpozná úzkou vnitřní plnou výplňovou oblast. Je-"
+"li povolena, bude pro oblast použit soustředný vzor, aby se urychlil tisk. V "
+"opačném případě se ve výchozím nastavení použije přímočarý vzor."
+
 msgid "invalid value "
 msgstr "neplatná hodnota "
 
@@ -10935,7 +10960,7 @@ msgid "Update the configs values of 3mf to latest."
 msgstr "Aktualizujte konfigurační hodnoty 3mf na nejnovější."
 
 msgid "Load default filaments"
-msgstr "Načíst výchozí filameny"
+msgstr "Načíst výchozí filamenty"
 
 msgid "Load first filament as default for those not loaded"
 msgstr "Načíst první filament jako výchozí pro ty, které nebyly načteny"
@@ -11377,7 +11402,7 @@ msgid ""
 "3. If the max volumetric speed or print temperature is changed in the "
 "filament setting."
 msgstr ""
-"Nyní jsme přidali automatickou kalibraci pro různé filameny, která je plně "
+"Nyní jsme přidali automatickou kalibraci pro různé filamenty, která je plně "
 "automatizovaná a výsledek bude uložen do tiskárny pro budoucí použití. "
 "Kalibraci musíte provést pouze v následujících omezených případech:\n"
 "1. Pokud použijete nový filament jiné značky/modelu nebo je filament vlhký;\n"
@@ -11725,7 +11750,7 @@ msgid "Success to get history result"
 msgstr "Úspěšně načtený historický výsledek kalibrace dynamiky průtoku"
 
 msgid "Refreshing the historical Flow Dynamics Calibration records"
-msgstr "Aktualizace historických záznamů kalibrace dynamiky průtpku probíhá"
+msgstr "Aktualizace historických záznamů kalibrace dynamiky průtoku probíhá"
 
 msgid "Action"
 msgstr "Akce"
@@ -11746,7 +11771,7 @@ msgid "Service name"
 msgstr "Název služby"
 
 msgid "OctoPrint version"
-msgstr "Service name"
+msgstr "Verze OctoPrintu"
 
 msgid "Searching for devices"
 msgstr "Vyhledávání zařízení"
@@ -12346,6 +12371,38 @@ msgstr ""
 "při tisku filamentu s nižší teplotou a vyšší teplotě uzavřeného prostoru. "
 "Další informace naleznete ve Wiki."
 
+#, c-format, boost-format
+#~ msgid ""
+#~ "The 3mf's version %s is newer than %s's version %s, Found following keys "
+#~ "unrecognized:"
+#~ msgstr ""
+#~ "Verze 3mf %s je novější než verze %s %s, byly nalezeny následující klíče "
+#~ "nerozpoznaný:"
+
+#~ msgid "You'd better upgrade your software.\n"
+#~ msgstr "Měli byste aktualizovat software.\n"
+
+#~ msgid "Newer 3mf version"
+#~ msgstr "Novější verze 3mf"
+
+#, c-format, boost-format
+#~ msgid ""
+#~ "The 3mf's version %s is newer than %s's version %s, Suggest to upgrade "
+#~ "your software."
+#~ msgstr ""
+#~ "Verze %s zařízení 3mf je novější než verze %s %s, navrhněte upgrade "
+#~ "vašeho software."
+
+#~ msgid "Embeded"
+#~ msgstr "Vloženo"
+
+#~ msgid ""
+#~ "OrcaSlicer configuration file may be corrupted and is not abled to be "
+#~ "parsed.Please delete the file and try again."
+#~ msgstr ""
+#~ "Konfigurační soubor OrcaSlicer může být poškozen a nelze jej analyzovat."
+#~ "Smažte soubor a zkuste to znovu."
+
 #~ msgid "Online Models"
 #~ msgstr "Online modely"
 
@@ -12396,16 +12453,6 @@ msgstr ""
 #~ "Teplota podložky překračuje teplotu vitrifikace filamentu. Prosím. Před "
 #~ "tiskem otevřete přední dvířka tiskárny, aby nedošlo k ucpání trysky."
 
-#~ msgid "Ensure vertical shell thickness"
-#~ msgstr "Zajistit tloušťku svislých stěn"
-
-#~ msgid ""
-#~ "Add solid infill near sloping surfaces to guarantee the vertical shell "
-#~ "thickness (top+bottom solid layers)"
-#~ msgstr ""
-#~ "Přidá plnou výplň u šikmých ploch pro garanci tloušťky svislých stěn "
-#~ "(vrchních a spodních plných vrstev)"
-
 #~ msgid "Temperature of vitrificaiton"
 #~ msgstr "Teplota vitrifikace"
 
@@ -12436,18 +12483,6 @@ msgstr ""
 #~ "touto rychlostí během tisku kromě prvních několika vrstev, které nejsou "
 #~ "definovány žádnými chladicími vrstvami"
 
-#~ msgid "Detect narrow internal solid infill"
-#~ msgstr "Detekovat úzkou vnitřní plnou výplň"
-
-#~ msgid ""
-#~ "This option will auto detect narrow internal solid infill area. If "
-#~ "enabled, concentric pattern will be used for the area to speed printing "
-#~ "up. Otherwise, rectilinear pattern is used defaultly."
-#~ msgstr ""
-#~ "Tato možnost automaticky rozpozná úzkou vnitřní plnou výplňovou oblast. "
-#~ "Je-li povolena, bude pro oblast použit soustředný vzor, aby se urychlil "
-#~ "tisk. V opačném případě se ve výchozím nastavení použije přímočarý vzor."
-
 #~ msgid ""
 #~ "Filter out gaps smaller than the threshold specified. This setting won't "
 #~ "affect top/bottom layers"

localization/i18n/de/OrcaSlicer_de.po

@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-11-04 14:18+0800\n"
+"POT-Creation-Date: 2023-12-02 01:44+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: Heiko Liebscher <hliebschergmail.com>\n"
 "Language-Team: \n"
@@ -148,7 +148,7 @@ msgid "Bucket fill"
 msgstr "Flächenfüllung"
 
 msgid "Height range"
-msgstr "Höhenreichweite"
+msgstr "Höhenbereich"
 
 msgid "Ctrl + Shift + Enter"
 msgstr "Strg + Umschalt + Eingabetaste"
@@ -163,7 +163,7 @@ msgid "Triangle"
 msgstr "Dreieck"
 
 msgid "Height Range"
-msgstr "Höhenreichweite"
+msgstr "Höhenbereich"
 
 msgid "Vertical"
 msgstr "Vertikal"
@@ -494,27 +494,12 @@ msgstr "Naht aufmalen"
 msgid "Remove selection"
 msgstr "Auswahl entfernen"
 
-msgid "Shift + Mouse move up or dowm"
-msgstr "Umschalttaste + Mausbewegung nach oben oder unten"
-
-msgid "Rotate text"
-msgstr "Text drehen"
-
-msgid "Text shape"
-msgstr "Text zufügen"
-
 msgid "Font"
 msgstr "Schiftart"
 
 msgid "Thickness"
 msgstr "Dicke"
 
-msgid "Input text"
-msgstr "Text eingeben"
-
-msgid "Embeded"
-msgstr "Eingebettet"
-
 msgid "Text Gap"
 msgstr "Textabstand"
 
@@ -528,12 +513,24 @@ msgstr ""
 "Eingebettete\n"
 "Tiefe"
 
+msgid "Input text"
+msgstr "Text eingeben"
+
 msgid "Surface"
 msgstr "Oberfläche"
 
 msgid "Horizontal text"
 msgstr "Horizontaler Text"
 
+msgid "Shift + Mouse move up or dowm"
+msgstr "Umschalttaste + Mausbewegung nach oben oder unten"
+
+msgid "Rotate text"
+msgstr "Text drehen"
+
+msgid "Text shape"
+msgstr "Text zufügen"
+
 msgid "Ctrl+"
 msgstr "Strg +"
 
@@ -627,14 +624,6 @@ msgstr ""
 msgid "WebView2 Runtime"
 msgstr "WebView2-Runtime"
 
-msgid ""
-"OrcaSlicer configuration file may be corrupted and is not abled to be parsed."
-"Please delete the file and try again."
-msgstr ""
-"Die OrcaSlicer-Konfigurationsdatei ist möglicherweise beschädigt und kann "
-"nicht geladen werden. Bitte löschen Sie die Datei und versuchen Sie es "
-"erneut."
-
 #, c-format, boost-format
 msgid ""
 "%s\n"
@@ -664,6 +653,18 @@ msgstr "Dies ist die neueste Version."
 msgid "Info"
 msgstr "Info"
 
+msgid ""
+"The OrcaSlicer configuration file may be corrupted and cannot be parsed.\n"
+"OrcaSlicer has attempted to recreate the configuration file.\n"
+"Please note, application settings will be lost, but printer profiles will "
+"not be affected."
+msgstr ""
+"Die OrcaSlicer-Konfigurationsdatei ist möglicherweise beschädigt und kann "
+"nicht analysiert werden.\n"
+"OrcaSlicer hat versucht, die Konfigurationsdatei neu zu erstellen.\n"
+"Bitte beachten Sie, dass die Anwendungseinstellungen verloren gehen, die "
+"Druckerprofile jedoch nicht betroffen sind."
+
 msgid "Rebuild"
 msgstr "Wiederaufbau"
 
@@ -4710,28 +4711,6 @@ msgstr ""
 "Die 3mf wurde mit einer alten Version von OrcaSlicer generiert, lade nur die "
 "Geometriedaten."
 
-#, c-format, boost-format
-msgid ""
-"The 3mf's version %s is newer than %s's version %s, Found following keys "
-"unrecognized:"
-msgstr ""
-"Die Version %s von 3mf ist neuer als die Version %s von %s, folgende "
-"Schlüssel wurden nicht erkannt:"
-
-msgid "You'd better upgrade your software.\n"
-msgstr "Sie sollten Ihre Software aktualisieren.\n"
-
-msgid "Newer 3mf version"
-msgstr "Neuere 3mf-Version"
-
-#, c-format, boost-format
-msgid ""
-"The 3mf's version %s is newer than %s's version %s, Suggest to upgrade your "
-"software."
-msgstr ""
-"Die Version %s der 3mf ist neuer als die Version %s %s. Bitte Ihre Software "
-"aktualisieren."
-
 msgid "Invalid values found in the 3mf:"
 msgstr "Ungültige Werte in der 3MF-Datei gefunden:"
 
@@ -6352,6 +6331,9 @@ msgstr "Zeitraffer G-Code"
 msgid "Change filament G-code"
 msgstr "Filamentwechsel G-Code"
 
+msgid "Change extrusion role G-code"
+msgstr "Ändere den G-Code der Extrusionsart"
+
 msgid "Pause G-code"
 msgstr "Pausen G-Code"
 
@@ -7909,6 +7891,15 @@ msgstr ""
 "Verringern Sie diesen Wert geringfügig (z. B. 0,9), um die Materialmenge für "
 "die Brücke zu verringern und den Durchhang zu minimieren"
 
+msgid "Internal bridge flow"
+msgstr ""
+
+msgid ""
+"This value governs the thickness of the internal bridge layer. This is the "
+"first layer over sparse infill. Decrease this value slightly (for example "
+"0.9) to improve surface quality over sparse infill."
+msgstr ""
+
 msgid "Top surface flow ratio"
 msgstr "Durchflussverhältnis obere Fläche"
 
@@ -8246,6 +8237,15 @@ msgstr ""
 "Wenn deaktiviert, sehen Brücken besser aus, sind aber nur für kürzere "
 "Entfernungen zuverlässig."
 
+msgid "Thick internal bridges"
+msgstr ""
+
+msgid ""
+"If enabled, thick internal bridges will be used. It's usually recommended to "
+"have this feature turned on. However, consider turning it off if you are "
+"using large nozzles."
+msgstr ""
+
 msgid "Max bridge length"
 msgstr "Max Überbrückungslänge"
 
@@ -8267,6 +8267,16 @@ msgstr "End G-Code nach dem fertigstellen des Drucks hinzufügen."
 msgid "End G-code when finish the printing of this filament"
 msgstr "End-G-Code hinzufügen, wenn der Druck dieses Filaments beenden ist."
 
+msgid "Ensure vertical shell thickness"
+msgstr "Sicherstellung der vertikalen Wanddicke"
+
+msgid ""
+"Add solid infill near sloping surfaces to guarantee the vertical shell "
+"thickness (top+bottom solid layers)"
+msgstr ""
+"In der Nähe von schrägen Flächen massive Füllungen hinzufügen, um die "
+"vertikale Wanddicke zu gewährleisten (obere + untere massive Schichten)."
+
 msgid "Top surface pattern"
 msgstr "Muster der Oberfläche"
 
@@ -10794,6 +10804,9 @@ msgstr ""
 "Dieser G-Code wird beim Filamentwechsel eingefügt, einschließlich des T-"
 "Befehls zum Auslösen des Werkzeugwechsels"
 
+msgid "This gcode is inserted when the extrusion role is changed"
+msgstr "Dieser G-Code wird beim Wechsel der Extrusionsart eingefügt"
+
 msgid ""
 "Line width for top surfaces. If expressed as a %, it will be computed over "
 "the nozzle diameter."
@@ -11194,6 +11207,19 @@ msgstr ""
 "Dicke des Features, wird die Wand so dick wie das Feature selbst. Wird als "
 "Prozentsatz des Düsendurchmessers angegeben."
 
+msgid "Detect narrow internal solid infill"
+msgstr "Erkennen einer schmalen internen soliden Füllung"
+
+msgid ""
+"This option will auto detect narrow internal solid infill area. If enabled, "
+"concentric pattern will be used for the area to speed printing up. "
+"Otherwise, rectilinear pattern is used defaultly."
+msgstr ""
+"Mit dieser Option wird ein schmaler innerer Füllbereich automatisch erkannt. "
+"Wenn diese Option aktiviert ist, wird ein konzentrisches Muster für den "
+"Bereich verwendet, um den Druck zu beschleunigen. Andernfalls wird "
+"standardmäßig ein geradliniges Muster verwendet."
+
 msgid "invalid value "
 msgstr "Ungültiger Wert"
 
@@ -12700,6 +12726,39 @@ msgstr ""
 "höherer Gehäusetemperatur verringern. Weitere Informationen dazu finden Sie "
 "in der Wiki."
 
+#, c-format, boost-format
+#~ msgid ""
+#~ "The 3mf's version %s is newer than %s's version %s, Found following keys "
+#~ "unrecognized:"
+#~ msgstr ""
+#~ "Die Version %s von 3mf ist neuer als die Version %s von %s, folgende "
+#~ "Schlüssel wurden nicht erkannt:"
+
+#~ msgid "You'd better upgrade your software.\n"
+#~ msgstr "Sie sollten Ihre Software aktualisieren.\n"
+
+#~ msgid "Newer 3mf version"
+#~ msgstr "Neuere 3mf-Version"
+
+#, c-format, boost-format
+#~ msgid ""
+#~ "The 3mf's version %s is newer than %s's version %s, Suggest to upgrade "
+#~ "your software."
+#~ msgstr ""
+#~ "Die Version %s der 3mf ist neuer als die Version %s %s. Bitte Ihre "
+#~ "Software aktualisieren."
+
+#~ msgid "Embeded"
+#~ msgstr "Eingebettet"
+
+#~ msgid ""
+#~ "OrcaSlicer configuration file may be corrupted and is not abled to be "
+#~ "parsed.Please delete the file and try again."
+#~ msgstr ""
+#~ "Die OrcaSlicer-Konfigurationsdatei ist möglicherweise beschädigt und kann "
+#~ "nicht geladen werden. Bitte löschen Sie die Datei und versuchen Sie es "
+#~ "erneut."
+
 #~ msgid "Online Models"
 #~ msgstr "Online-Modelle"
 
@@ -12757,16 +12816,6 @@ msgstr ""
 #~ msgid "Activate for better air filtration"
 #~ msgstr "Aktivieren Sie die Luftfilterung für eine bessere Luftfiltration"
 
-#~ msgid "Ensure vertical shell thickness"
-#~ msgstr "Sicherstellung der vertikalen Wanddicke"
-
-#~ msgid ""
-#~ "Add solid infill near sloping surfaces to guarantee the vertical shell "
-#~ "thickness (top+bottom solid layers)"
-#~ msgstr ""
-#~ "In der Nähe von schrägen Flächen massive Füllungen hinzufügen, um die "
-#~ "vertikale Wanddicke zu gewährleisten (obere + untere massive Schichten)."
-
 #~ msgid "Temperature of vitrificaiton"
 #~ msgstr "Verglasungstemperatur"
 
@@ -12802,19 +12851,6 @@ msgstr ""
 #~ "läuft während des Drucks mit dieser Geschwindigkeit, mit Ausnahme der "
 #~ "ersten Schichten, für die keine Kühlung vorgesehen ist."
 
-#~ msgid "Detect narrow internal solid infill"
-#~ msgstr "Erkennen einer schmalen internen soliden Füllung"
-
-#~ msgid ""
-#~ "This option will auto detect narrow internal solid infill area. If "
-#~ "enabled, concentric pattern will be used for the area to speed printing "
-#~ "up. Otherwise, rectilinear pattern is used defaultly."
-#~ msgstr ""
-#~ "Mit dieser Option wird ein schmaler innerer Füllbereich automatisch "
-#~ "erkannt. Wenn diese Option aktiviert ist, wird ein konzentrisches Muster "
-#~ "für den Bereich verwendet, um den Druck zu beschleunigen. Andernfalls "
-#~ "wird standardmäßig ein geradliniges Muster verwendet."
-
 #~ msgid ""
 #~ "Filter out gaps smaller than the threshold specified. This setting won't "
 #~ "affect top/bottom layers"

localization/i18n/en/OrcaSlicer_en.po

@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-11-04 14:18+0800\n"
+"POT-Creation-Date: 2023-12-02 01:44+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -11,7 +11,7 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=2; plural=(n==1) ? 0 : 1;\n"
-"X-Generator: Poedit 3.3.2\n"
+"X-Generator: Poedit 3.4.1\n"
 
 msgid "Supports Painting"
 msgstr "Support Painting"
@@ -491,27 +491,12 @@ msgstr "Seam painting"
 msgid "Remove selection"
 msgstr "Remove selection"
 
-msgid "Shift + Mouse move up or dowm"
-msgstr "Shift + Mouse move up or dowm"
-
-msgid "Rotate text"
-msgstr "Rotate text"
-
-msgid "Text shape"
-msgstr "Text shape"
-
 msgid "Font"
 msgstr "Font"
 
 msgid "Thickness"
 msgstr "Thickness"
 
-msgid "Input text"
-msgstr "Input text"
-
-msgid "Embeded"
-msgstr "Embedded"
-
 msgid "Text Gap"
 msgstr "Text Gap"
 
@@ -523,12 +508,24 @@ msgid ""
 "depth"
 msgstr "Embedded depth"
 
+msgid "Input text"
+msgstr "Input text"
+
 msgid "Surface"
 msgstr "Surface"
 
 msgid "Horizontal text"
 msgstr "Horizontal text"
 
+msgid "Shift + Mouse move up or dowm"
+msgstr "Shift + Mouse move up or dowm"
+
+msgid "Rotate text"
+msgstr "Rotate text"
+
+msgid "Text shape"
+msgstr "Text shape"
+
 msgid "Ctrl+"
 msgstr "Ctrl+"
 
@@ -612,11 +609,6 @@ msgstr ""
 msgid "WebView2 Runtime"
 msgstr ""
 
-msgid ""
-"OrcaSlicer configuration file may be corrupted and is not abled to be parsed."
-"Please delete the file and try again."
-msgstr ""
-
 #, c-format, boost-format
 msgid ""
 "%s\n"
@@ -644,6 +636,13 @@ msgstr "This is the newest version."
 msgid "Info"
 msgstr "Info"
 
+msgid ""
+"The OrcaSlicer configuration file may be corrupted and cannot be parsed.\n"
+"OrcaSlicer has attempted to recreate the configuration file.\n"
+"Please note, application settings will be lost, but printer profiles will "
+"not be affected."
+msgstr ""
+
 msgid "Rebuild"
 msgstr "Rebuild"
 
@@ -4081,7 +4080,7 @@ msgid "Upload failed\n"
 msgstr ""
 
 msgid "obtaining instance_id failed\n"
-msgstr ""
+msgstr "Obtaining instance_id failed\n"
 
 msgid ""
 "Your comment result cannot be uploaded due to some reasons. As follows:\n"
@@ -4520,28 +4519,6 @@ msgstr "The Config cannot be loaded."
 msgid "The 3mf is generated by old Orca Slicer, load geometry data only."
 msgstr ""
 
-#, c-format, boost-format
-msgid ""
-"The 3mf's version %s is newer than %s's version %s, Found following keys "
-"unrecognized:"
-msgstr ""
-"The 3mf's version %s is newer than %s's version %s, Found following keys "
-"unrecognized:"
-
-msgid "You'd better upgrade your software.\n"
-msgstr "You should update your software.\n"
-
-msgid "Newer 3mf version"
-msgstr "Newer 3mf version"
-
-#, c-format, boost-format
-msgid ""
-"The 3mf's version %s is newer than %s's version %s, Suggest to upgrade your "
-"software."
-msgstr ""
-"The 3mf's version %s is newer than %s's version %s, Suggest to upgrade your "
-"software."
-
 msgid "Invalid values found in the 3mf:"
 msgstr "Invalid values found in the 3mf:"
 
@@ -4661,7 +4638,7 @@ msgid "Please select a file"
 msgstr "Please select a file"
 
 msgid "Do you want to replace it"
-msgstr ""
+msgstr "Do you want to replace it?"
 
 msgid "Message"
 msgstr ""
@@ -6088,6 +6065,9 @@ msgstr ""
 msgid "Change filament G-code"
 msgstr "Change filament G-code"
 
+msgid "Change extrusion role G-code"
+msgstr ""
+
 msgid "Pause G-code"
 msgstr "Pause G-code"
 
@@ -7566,6 +7546,15 @@ msgstr ""
 "Decrease this value slightly (for example 0.9) to reduce the amount of "
 "material extruded for bridges to avoid sagging."
 
+msgid "Internal bridge flow"
+msgstr ""
+
+msgid ""
+"This value governs the thickness of the internal bridge layer. This is the "
+"first layer over sparse infill. Decrease this value slightly (for example "
+"0.9) to improve surface quality over sparse infill."
+msgstr ""
+
 msgid "Top surface flow ratio"
 msgstr ""
 
@@ -7861,6 +7850,15 @@ msgstr ""
 "may look worse. If disabled, bridges look better but are reliable only for "
 "shorter distances."
 
+msgid "Thick internal bridges"
+msgstr ""
+
+msgid ""
+"If enabled, thick internal bridges will be used. It's usually recommended to "
+"have this feature turned on. However, consider turning it off if you are "
+"using large nozzles."
+msgstr ""
+
 msgid "Max bridge length"
 msgstr "Max bridge length"
 
@@ -7882,6 +7880,16 @@ msgstr "Add end G-Code when finishing the entire print."
 msgid "End G-code when finish the printing of this filament"
 msgstr "Add end G-code when finishing the printing of this filament."
 
+msgid "Ensure vertical shell thickness"
+msgstr "Ensure vertical shell thickness"
+
+msgid ""
+"Add solid infill near sloping surfaces to guarantee the vertical shell "
+"thickness (top+bottom solid layers)"
+msgstr ""
+"Add solid infill near sloping surfaces to guarantee the vertical shell "
+"thickness (top+bottom solid layers)."
+
 msgid "Top surface pattern"
 msgstr "Top surface pattern"
 
@@ -9704,21 +9712,21 @@ msgid ""
 "normal(manual) or tree(manual) is selected, only support enforcers are "
 "generated"
 msgstr ""
-"normal(auto) and tree(auto) are used to generate support automatically. If "
+"Normal(auto) and Tree(auto) are used to generate support automatically. If "
 "normal(manual) or tree(manual) is selected, only support enforcers are "
 "generated"
 
 msgid "normal(auto)"
-msgstr "normal(auto)"
+msgstr "Normal(auto)"
 
 msgid "tree(auto)"
-msgstr "tree(auto)"
+msgstr "Tree(auto)"
 
 msgid "normal(manual)"
-msgstr "normal(manual)"
+msgstr "Normal(manual)"
 
 msgid "tree(manual)"
-msgstr "tree(manual)"
+msgstr "Tree(manual)"
 
 msgid "Support/object xy distance"
 msgstr "Support/object xy distance"
@@ -10072,6 +10080,9 @@ msgstr ""
 "This G-code is inserted when filament is changed, including T commands to "
 "trigger tool change."
 
+msgid "This gcode is inserted when the extrusion role is changed"
+msgstr ""
+
 msgid ""
 "Line width for top surfaces. If expressed as a %, it will be computed over "
 "the nozzle diameter."
@@ -10432,6 +10443,18 @@ msgstr ""
 "thickness of the feature, the wall will become as thick as the feature "
 "itself. It's expressed as a percentage over nozzle diameter"
 
+msgid "Detect narrow internal solid infill"
+msgstr "Detect narrow internal solid infill"
+
+msgid ""
+"This option will auto detect narrow internal solid infill area. If enabled, "
+"concentric pattern will be used for the area to speed printing up. "
+"Otherwise, rectilinear pattern is used defaultly."
+msgstr ""
+"This option will auto-detect narrow internal solid infill areas. If enabled, "
+"the concentric pattern will be used for the area to speed up printing. "
+"Otherwise, the rectilinear pattern will be used by default."
+
 msgid "invalid value "
 msgstr "invalid value "
 
@@ -11691,6 +11714,31 @@ msgid ""
 "temperature. More info about this in the Wiki."
 msgstr ""
 
+#, c-format, boost-format
+#~ msgid ""
+#~ "The 3mf's version %s is newer than %s's version %s, Found following keys "
+#~ "unrecognized:"
+#~ msgstr ""
+#~ "The 3mf's version %s is newer than %s's version %s, Found following keys "
+#~ "unrecognized:"
+
+#~ msgid "You'd better upgrade your software.\n"
+#~ msgstr "You should update your software.\n"
+
+#~ msgid "Newer 3mf version"
+#~ msgstr "Newer 3mf version"
+
+#, c-format, boost-format
+#~ msgid ""
+#~ "The 3mf's version %s is newer than %s's version %s, Suggest to upgrade "
+#~ "your software."
+#~ msgstr ""
+#~ "The 3mf's version %s is newer than %s's version %s, Suggest to upgrade "
+#~ "your software."
+
+#~ msgid "Embeded"
+#~ msgstr "Embedded"
+
 #~ msgid "Online Models"
 #~ msgstr "Online Models"
 
@@ -11707,16 +11755,6 @@ msgstr ""
 #~ "The bed temperature exceeds filament's vitrification temperature. Please "
 #~ "open the front door of printer before printing to avoid nozzle clogs."
 
-#~ msgid "Ensure vertical shell thickness"
-#~ msgstr "Ensure vertical shell thickness"
-
-#~ msgid ""
-#~ "Add solid infill near sloping surfaces to guarantee the vertical shell "
-#~ "thickness (top+bottom solid layers)"
-#~ msgstr ""
-#~ "Add solid infill near sloping surfaces to guarantee the vertical shell "
-#~ "thickness (top+bottom solid layers)."
-
 #~ msgid "Temperature of vitrificaiton"
 #~ msgstr "Temperature of vitrification"
 
@@ -11739,18 +11777,6 @@ msgstr ""
 #~ "run at this speed during printing except for during the first several "
 #~ "layers which may be set to have no part cooling."
 
-#~ msgid "Detect narrow internal solid infill"
-#~ msgstr "Detect narrow internal solid infill"
-
-#~ msgid ""
-#~ "This option will auto detect narrow internal solid infill area. If "
-#~ "enabled, concentric pattern will be used for the area to speed printing "
-#~ "up. Otherwise, rectilinear pattern is used defaultly."
-#~ msgstr ""
-#~ "This option will auto-detect narrow internal solid infill areas. If "
-#~ "enabled, the concentric pattern will be used for the area to speed up "
-#~ "printing. Otherwise, the rectilinear pattern will be used by default."
-
 #~ msgid "Empty layers around bottom are replaced by nearest normal layers."
 #~ msgstr "Empty layers around bottom are replaced by nearest normal layers."
 

localization/i18n/es/OrcaSlicer_es.po

@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-11-04 14:18+0800\n"
+"POT-Creation-Date: 2023-12-02 01:44+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: Carlos Fco. Caruncho Serrano <puzzlero@gmail.com>\n"
 "Language-Team: \n"
@@ -254,7 +254,7 @@ msgid "%"
 msgstr "%"
 
 msgid "uniform scale"
-msgstr "escala uniforme"
+msgstr "Escala uniforme"
 
 msgid "Left click"
 msgstr "Click izquierdo"
@@ -494,27 +494,12 @@ msgstr "Pintar costura"
 msgid "Remove selection"
 msgstr "Borrar selección"
 
-msgid "Shift + Mouse move up or dowm"
-msgstr "Shift + Mover ratón arriba u abajo"
-
-msgid "Rotate text"
-msgstr "Rotar texto"
-
-msgid "Text shape"
-msgstr "Forma de texto"
-
 msgid "Font"
 msgstr "Fuente"
 
 msgid "Thickness"
 msgstr "Grosor"
 
-msgid "Input text"
-msgstr "Texto de entrada"
-
-msgid "Embeded"
-msgstr "Integrado"
-
 msgid "Text Gap"
 msgstr "Espacio de texto"
 
@@ -528,12 +513,24 @@ msgstr ""
 "Profundidad\n"
 "Integrada"
 
+msgid "Input text"
+msgstr "Texto de entrada"
+
 msgid "Surface"
 msgstr "Superficie"
 
 msgid "Horizontal text"
 msgstr "Texto horizontal"
 
+msgid "Shift + Mouse move up or dowm"
+msgstr "Shift + Mover ratón arriba u abajo"
+
+msgid "Rotate text"
+msgstr "Rotar texto"
+
+msgid "Text shape"
+msgstr "Forma de texto"
+
 msgid "Ctrl+"
 msgstr "Ctrl+"
 
@@ -634,22 +631,13 @@ msgstr ""
 msgid "WebView2 Runtime"
 msgstr "Tiempo de ejecución de WebView2"
 
-msgid ""
-"OrcaSlicer configuration file may be corrupted and is not abled to be parsed."
-"Please delete the file and try again."
-msgstr ""
-"El archivo de configuración de OrcaSlicer puede estar dañado y no puede ser "
-"procesado. Por favor borre el archivo e inténtelo otra vez."
-
-# msgid "OrcaSlicer configuration file may be corrupted and is not abled to be parsed.Please delete the file and try again."
-# msgstr "Es posible que el archivo de configuración de OrcaSlicer esté dañado y no pueda ser procesado. Por favor, borre el archivo e inténtelo de nuevo."
 #, c-format, boost-format
 msgid ""
 "%s\n"
 "Do you want to continue?"
 msgstr ""
 "%s\n"
-"¿Quiere continuar?"
+"¿Quieres continuar?"
 
 msgid "Remember my choice"
 msgstr "Recordar mi selección"
@@ -671,6 +659,18 @@ msgstr "Esta es la versión más reciente."
 msgid "Info"
 msgstr "Información"
 
+msgid ""
+"The OrcaSlicer configuration file may be corrupted and cannot be parsed.\n"
+"OrcaSlicer has attempted to recreate the configuration file.\n"
+"Please note, application settings will be lost, but printer profiles will "
+"not be affected."
+msgstr ""
+"El archivo de configuración de OrcaSlicer puede estar dañado y no puede ser "
+"analizado.\n"
+"OrcaSlicer ha intentado recrear el archivo de configuración.\n"
+"Tenga en cuenta que se perderán los ajustes de la aplicación, pero los "
+"perfiles de impresora no se verán afectados."
+
 msgid "Rebuild"
 msgstr "Reconstruir"
 
@@ -842,10 +842,10 @@ msgid "Add modifier"
 msgstr "Añadir modificador"
 
 msgid "Add support blocker"
-msgstr "Añadir bloqueo soportes"
+msgstr "Añadir bloqueo de soportes"
 
 msgid "Add support enforcer"
-msgstr "Añadir forzado de soportes"
+msgstr "Añadir refuerzo de soportes"
 
 msgid "Select settings"
 msgstr "Seleccione los ajustes"
@@ -905,10 +905,10 @@ msgid "Set as individual objects"
 msgstr "Ajustar como objetos individuales"
 
 msgid "Fill bed with copies"
-msgstr "Fill bed with copies"
+msgstr "Llenar la cama de copias"
 
 msgid "Fill the remaining area of bed with copies of the selected object"
-msgstr "Fill the remaining area of bed with copies of the selected object"
+msgstr "Llena el resto del área de la cama con copias del objeto seleccionado"
 
 msgid "Printable"
 msgstr "Imprimible"
@@ -966,7 +966,7 @@ msgid "Flush into objects' support"
 msgstr "Purgar en los soportes de objetos"
 
 msgid "Edit in Parameter Table"
-msgstr "Editar en la Tabla de Parámetro"
+msgstr "Editar en la Tabla de Parámetros"
 
 msgid "Convert from inch"
 msgstr "Convertir desde pulgadas"
@@ -4670,28 +4670,6 @@ msgstr ""
 "El 3mf está generado por un Orca Slicer antiguo, cargar solo datos de "
 "geometría."
 
-#, c-format, boost-format
-msgid ""
-"The 3mf's version %s is newer than %s's version %s, Found following keys "
-"unrecognized:"
-msgstr ""
-"La versión de 3mf %s es más nueva que la versión de %s %s, encontradas las "
-"siguientes llaves no reconocidas:"
-
-msgid "You'd better upgrade your software.\n"
-msgstr "Será mejor que actualices tu software.\n"
-
-msgid "Newer 3mf version"
-msgstr "Nueva versión 3mf"
-
-#, c-format, boost-format
-msgid ""
-"The 3mf's version %s is newer than %s's version %s, Suggest to upgrade your "
-"software."
-msgstr ""
-"La versión de 3mf %s es más nueva que la versión de %s %s, se sugiere "
-"actualizar su sofware."
-
 msgid "Invalid values found in the 3mf:"
 msgstr "Valores inválidos encontrados en el 3mf:"
 
@@ -4816,7 +4794,7 @@ msgid "Please select a file"
 msgstr "Por favor, seleccione un archivo"
 
 msgid "Do you want to replace it"
-msgstr "¿Quiere reemplazarlo?"
+msgstr "¿Desea reemplazarlo?"
 
 msgid "Message"
 msgstr "Mensaje"
@@ -5146,13 +5124,13 @@ msgid "Units"
 msgstr "Unidades"
 
 msgid "Home"
-msgstr ""
+msgstr "Página de Inicio"
 
 msgid "Default Page"
-msgstr ""
+msgstr "Página por defecto"
 
 msgid "Set the page opened on startup."
-msgstr ""
+msgstr "Establece la página que se abre al inicio."
 
 msgid "Zoom to mouse position"
 msgstr "Hacer zoom en la posición del ratón"
@@ -5169,14 +5147,14 @@ msgstr "Usar cámara libre"
 
 msgid "If enabled, use free camera. If not enabled, use constrained camera."
 msgstr ""
-"Si está activada, usa la cámara libre. Si no está activada, usa la cámara "
-"restringida"
+"Si está activada, utiliza la cámara libre. Si no está activada, utiliza la "
+"cámara restringida."
 
 msgid "Show splash screen"
-msgstr ""
+msgstr "Mostrar pantalla de inicio"
 
 msgid "Show the splash screen during startup."
-msgstr ""
+msgstr "Muestra la página de bienvenida al iniciar."
 
 msgid "Show \"Tip of the day\" notification after start"
 msgstr "Mostrar la notificación \"Consejo del Día\" después de empezar"
@@ -6300,6 +6278,9 @@ msgstr "Timelapse G-code"
 msgid "Change filament G-code"
 msgstr "G-Code para el cambio de filamento"
 
+msgid "Change extrusion role G-code"
+msgstr "Cambiar el rol de extrusión Código G"
+
 msgid "Pause G-code"
 msgstr "G-Code de pausa"
 
@@ -7846,6 +7827,15 @@ msgstr ""
 "Disminuya este valor ligeramente (por ejemplo 0,9) para reducir la cantidad "
 "de material para el puente, para mejorar el hundimiento"
 
+msgid "Internal bridge flow"
+msgstr ""
+
+msgid ""
+"This value governs the thickness of the internal bridge layer. This is the "
+"first layer over sparse infill. Decrease this value slightly (for example "
+"0.9) to improve surface quality over sparse infill."
+msgstr ""
+
 msgid "Top surface flow ratio"
 msgstr "Ratio de caudal en superficie superior"
 
@@ -8184,6 +8174,15 @@ msgstr ""
 "más largas, pero pueden tener peor aspecto. Si están desactivados, los "
 "puentes se ven mejor pero son fiables sólo para distancias más cortas."
 
+msgid "Thick internal bridges"
+msgstr ""
+
+msgid ""
+"If enabled, thick internal bridges will be used. It's usually recommended to "
+"have this feature turned on. However, consider turning it off if you are "
+"using large nozzles."
+msgstr ""
+
 msgid "Max bridge length"
 msgstr "Distancia máxima de puentes"
 
@@ -8205,6 +8204,16 @@ msgstr "Finalizar el G-Code cuando termine la impresión completa"
 msgid "End G-code when finish the printing of this filament"
 msgstr "Terminar el G-Code cuando se termine de imprimir este filamento"
 
+msgid "Ensure vertical shell thickness"
+msgstr "Detección de paredes delgadas"
+
+msgid ""
+"Add solid infill near sloping surfaces to guarantee the vertical shell "
+"thickness (top+bottom solid layers)"
+msgstr ""
+"Añadir relleno sólido al lado de capas inclinadas para garantizar el grosor "
+"de carcasa vertical (capas sólidas superior+inferior)"
+
 msgid "Top surface pattern"
 msgstr "Patrón de relleno superior"
 
@@ -9178,14 +9187,14 @@ msgstr ""
 "Ajústelo a 0 para desactivarlo."
 
 msgid "Time cost"
+msgstr "Coste dinerario por hora"
+
+msgid "The printer cost per hour"
 msgstr ""
 "La cantidad de dinero que cuesta la impresión que vamos a realizar por hora. "
 "Podemos calcular el coste dependiendo de la potencia de la impresora, el "
 "coste del filamento, etc."
 
-msgid "The printer cost per hour"
-msgstr "Coste por hora de la impresión"
-
 msgid "money/h"
 msgstr "dinero/hora"
 
@@ -10732,8 +10741,11 @@ msgid ""
 "This gcode is inserted when change filament, including T command to trigger "
 "tool change"
 msgstr ""
-"Este G-Code se inserta cuando se cambia de filamento, incluyendo el comando "
-"T para activar el cambio de herramienta"
+"Este gcode se inserta al cambiar de filamento, incluyendo el comando T para "
+"activar el cambio de herramienta"
+
+msgid "This gcode is inserted when the extrusion role is changed"
+msgstr "Este gcode se inserta cuando se cambia el rol de extrusión"
 
 msgid ""
 "Line width for top surfaces. If expressed as a %, it will be computed over "
@@ -11135,6 +11147,19 @@ msgstr ""
 "propia característica. Se expresa en porcentaje sobre el diámetro de la "
 "boquilla"
 
+msgid "Detect narrow internal solid infill"
+msgstr "Detección de pequeños rellenos sólidos"
+
+msgid ""
+"This option will auto detect narrow internal solid infill area. If enabled, "
+"concentric pattern will be used for the area to speed printing up. "
+"Otherwise, rectilinear pattern is used defaultly."
+msgstr ""
+"Esta opción detectará automáticamente el área de relleno sólido interno "
+"estrecho. Si se activa, se utilizará un patrón concéntrico para el área para "
+"acelerar la impresión. De lo contrario, se utilizará por defecto un patrón "
+"rectilíneo."
+
 msgid "invalid value "
 msgstr "valor inválido "
 
@@ -12635,6 +12660,42 @@ msgstr ""
 "extrusor/hotend al imprimir filamento de baja temperatura con una "
 "temperatura de carcasa más alta. Más información sobre esto en la Wiki."
 
+#, c-format, boost-format
+#~ msgid ""
+#~ "The 3mf's version %s is newer than %s's version %s, Found following keys "
+#~ "unrecognized:"
+#~ msgstr ""
+#~ "La versión de 3mf %s es más nueva que la versión de %s %s, encontradas "
+#~ "las siguientes llaves no reconocidas:"
+
+#~ msgid "You'd better upgrade your software.\n"
+#~ msgstr "Será mejor que actualices tu software.\n"
+
+#~ msgid "Newer 3mf version"
+#~ msgstr "Nueva versión 3mf"
+
+#, c-format, boost-format
+#~ msgid ""
+#~ "The 3mf's version %s is newer than %s's version %s, Suggest to upgrade "
+#~ "your software."
+#~ msgstr ""
+#~ "La versión de 3mf %s es más nueva que la versión de %s %s, se sugiere "
+#~ "actualizar su sofware."
+
+#~ msgid "The minimum printing speed when slow down for cooling"
+#~ msgstr ""
+#~ "La velocidad mínima de impresión cuando se ralentiza para el refrigeración"
+
+#~ msgid "Embeded"
+#~ msgstr "Integrado"
+
+#~ msgid ""
+#~ "OrcaSlicer configuration file may be corrupted and is not abled to be "
+#~ "parsed.Please delete the file and try again."
+#~ msgstr ""
+#~ "El archivo de configuración de OrcaSlicer puede estar dañado y no puede "
+#~ "ser procesado. Por favor borre el archivo e inténtelo otra vez."
+
 #~ msgid "Online Models"
 #~ msgstr "Modelos En Línea"
 
@@ -12691,10 +12752,6 @@ msgstr ""
 #~ msgstr ""
 #~ "Paso 1: confirme que Bambu Studio y su impresora estén en la misma LAN."
 
-#~ msgid "The minimum printing speed when slow down for cooling"
-#~ msgstr ""
-#~ "La velocidad mínima de impresión cuando se ralentiza para el refrigeración"
-
 #~ msgid "Empty layers around bottom are replaced by nearest normal layers."
 #~ msgstr ""
 #~ "Las capas vacías del fondo se sustituyen por las capas normales más "
@@ -12725,16 +12782,6 @@ msgstr ""
 #~ "filamento. Por favor, abra la puerta frontal de la impresora antes de "
 #~ "imprimir para evitar atascos en la boquilla."
 
-#~ msgid "Ensure vertical shell thickness"
-#~ msgstr "Detección de paredes delgadas"
-
-#~ msgid ""
-#~ "Add solid infill near sloping surfaces to guarantee the vertical shell "
-#~ "thickness (top+bottom solid layers)"
-#~ msgstr ""
-#~ "Añadir relleno sólido al lado de capas inclinadas para garantizar el "
-#~ "grosor de carcasa vertical (capas sólidas superior+inferior)"
-
 #~ msgid "Temperature of vitrificaiton"
 #~ msgstr "Temperatura de vitrificación"
 
@@ -12759,19 +12806,6 @@ msgstr ""
 #~ "funcionará a esta velocidad durante la impresión, excepto en las primeras "
 #~ "capas, que se define por la ausencia de capas de refrigeración"
 
-#~ msgid "Detect narrow internal solid infill"
-#~ msgstr "Detección de pequeños rellenos sólidos"
-
-#~ msgid ""
-#~ "This option will auto detect narrow internal solid infill area. If "
-#~ "enabled, concentric pattern will be used for the area to speed printing "
-#~ "up. Otherwise, rectilinear pattern is used defaultly."
-#~ msgstr ""
-#~ "Esta opción detectará automáticamente el área de relleno sólido interno "
-#~ "estrecho. Si se activa, se utilizará un patrón concéntrico para el área "
-#~ "para acelerar la impresión. De lo contrario, se utilizará por defecto un "
-#~ "patrón rectilíneo."
-
 #~ msgid "Cali"
 #~ msgstr "Cali"
 

localization/i18n/fr/OrcaSlicer_fr.po

@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-11-04 14:18+0800\n"
+"POT-Creation-Date: 2023-12-02 01:44+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: Guislain Cyril\n"
@@ -498,27 +498,12 @@ msgstr "Peindre la couture"
 msgid "Remove selection"
 msgstr "Supprimer la sélection"
 
-msgid "Shift + Mouse move up or dowm"
-msgstr "Shift + Déplacement de la souris vers le haut ou le bas"
-
-msgid "Rotate text"
-msgstr "Rotation du texte"
-
-msgid "Text shape"
-msgstr "Forme du texte"
-
 msgid "Font"
 msgstr "Police"
 
 msgid "Thickness"
 msgstr "Épaisseur"
 
-msgid "Input text"
-msgstr "Texte"
-
-msgid "Embeded"
-msgstr "Intégré"
-
 msgid "Text Gap"
 msgstr "Espacement du texte"
 
@@ -532,12 +517,24 @@ msgstr ""
 "Profondeur\n"
 "intégrée"
 
+msgid "Input text"
+msgstr "Texte"
+
 msgid "Surface"
 msgstr "Surface"
 
 msgid "Horizontal text"
 msgstr "Texte horizontal"
 
+msgid "Shift + Mouse move up or dowm"
+msgstr "Shift + Déplacement de la souris vers le haut ou le bas"
+
+msgid "Rotate text"
+msgstr "Rotation du texte"
+
+msgid "Text shape"
+msgstr "Forme du texte"
+
 msgid "Ctrl+"
 msgstr "Ctrl+"
 
@@ -633,13 +630,6 @@ msgstr ""
 msgid "WebView2 Runtime"
 msgstr ""
 
-msgid ""
-"OrcaSlicer configuration file may be corrupted and is not abled to be parsed."
-"Please delete the file and try again."
-msgstr ""
-"Le fichier de configuration de Orca Slicer est peut-être corrompu et ne peut "
-"pas être analysé. Veuillez supprimer le fichier et réessayer."
-
 #, c-format, boost-format
 msgid ""
 "%s\n"
@@ -667,6 +657,13 @@ msgstr "Il s'agit de la version la plus récente."
 msgid "Info"
 msgstr "Info"
 
+msgid ""
+"The OrcaSlicer configuration file may be corrupted and cannot be parsed.\n"
+"OrcaSlicer has attempted to recreate the configuration file.\n"
+"Please note, application settings will be lost, but printer profiles will "
+"not be affected."
+msgstr ""
+
 msgid "Rebuild"
 msgstr "Reconstruire"
 
@@ -4659,28 +4656,6 @@ msgstr ""
 "Le fichier 3mf a été généré par une ancienne version de Orca Slicer, "
 "chargement des données de géométrie uniquement."
 
-#, c-format, boost-format
-msgid ""
-"The 3mf's version %s is newer than %s's version %s, Found following keys "
-"unrecognized:"
-msgstr ""
-"La version %s de 3mf est plus récente que la version %s de %s, clés "
-"suivantes non reconnues :"
-
-msgid "You'd better upgrade your software.\n"
-msgstr "Il est préférable de mettre à jour votre logiciel.\n"
-
-msgid "Newer 3mf version"
-msgstr "Nouvelle version 3mf"
-
-#, c-format, boost-format
-msgid ""
-"The 3mf's version %s is newer than %s's version %s, Suggest to upgrade your "
-"software."
-msgstr ""
-"La version %s de 3mf est plus récente que la version %s de %s, nous vous "
-"suggérons de mettre à jour votre logiciel."
-
 msgid "Invalid values found in the 3mf:"
 msgstr "Valeurs non valides trouvées dans le 3mf :"
 
@@ -6312,6 +6287,9 @@ msgstr "G-code de Time lapse"
 msgid "Change filament G-code"
 msgstr "G-code de changement de filament"
 
+msgid "Change extrusion role G-code"
+msgstr ""
+
 msgid "Pause G-code"
 msgstr "G-code de mise en pause"
 
@@ -7853,6 +7831,15 @@ msgstr ""
 "Diminuez légèrement cette valeur (par exemple 0.9) pour réduire la quantité "
 "de matériaux pour le pont, pour améliorer l'affaissement"
 
+msgid "Internal bridge flow"
+msgstr ""
+
+msgid ""
+"This value governs the thickness of the internal bridge layer. This is the "
+"first layer over sparse infill. Decrease this value slightly (for example "
+"0.9) to improve surface quality over sparse infill."
+msgstr ""
+
 msgid "Top surface flow ratio"
 msgstr "Débit des surfaces supérieures"
 
@@ -8166,6 +8153,15 @@ msgstr ""
 "les ponts ont une meilleure apparence mais ne sont fiables que pour des "
 "distances plus courtes."
 
+msgid "Thick internal bridges"
+msgstr ""
+
+msgid ""
+"If enabled, thick internal bridges will be used. It's usually recommended to "
+"have this feature turned on. However, consider turning it off if you are "
+"using large nozzles."
+msgstr ""
+
 msgid "Max bridge length"
 msgstr "Longueur maximale des ponts"
 
@@ -8187,6 +8183,16 @@ msgstr "G-code lorsque l'ensemble de l'impression est terminée"
 msgid "End G-code when finish the printing of this filament"
 msgstr "G-code lorsque l'impression de ce filament est terminée"
 
+msgid "Ensure vertical shell thickness"
+msgstr "Veiller à l'épaisseur verticale de la coque"
+
+msgid ""
+"Add solid infill near sloping surfaces to guarantee the vertical shell "
+"thickness (top+bottom solid layers)"
+msgstr ""
+"Ajouter un remplissage solide près des surfaces en pente pour garantir "
+"l'épaisseur verticale de la coque (couches solides supérieures + inférieures)"
+
 msgid "Top surface pattern"
 msgstr "Motif des surfaces supérieures"
 
@@ -10554,6 +10560,9 @@ msgstr ""
 "Ce gcode est inséré lors du changement de filament, y compris la commande T "
 "pour déclencher le changement d'outil"
 
+msgid "This gcode is inserted when the extrusion role is changed"
+msgstr ""
+
 msgid ""
 "Line width for top surfaces. If expressed as a %, it will be computed over "
 "the nozzle diameter."
@@ -10932,6 +10941,18 @@ msgstr ""
 "aussi épaisse que celle du modèle. Elle est exprimée en pourcentage sur le "
 "diamètre de la buse"
 
+msgid "Detect narrow internal solid infill"
+msgstr "Détecter un remplissage solide étroit"
+
+msgid ""
+"This option will auto detect narrow internal solid infill area. If enabled, "
+"concentric pattern will be used for the area to speed printing up. "
+"Otherwise, rectilinear pattern is used defaultly."
+msgstr ""
+"Cette option détectera automatiquement les zones de remplissage solides "
+"étroits. Si activé, un motif concentrique sera utilisé pour les zones afin "
+"d'accélérer l'impression. Sinon, le motif rectiligne est utilisé par défaut."
+
 msgid "invalid value "
 msgstr "valeur invalide "
 
@@ -12303,6 +12324,38 @@ msgid ""
 "temperature. More info about this in the Wiki."
 msgstr ""
 
+#, c-format, boost-format
+#~ msgid ""
+#~ "The 3mf's version %s is newer than %s's version %s, Found following keys "
+#~ "unrecognized:"
+#~ msgstr ""
+#~ "La version %s de 3mf est plus récente que la version %s de %s, clés "
+#~ "suivantes non reconnues :"
+
+#~ msgid "You'd better upgrade your software.\n"
+#~ msgstr "Il est préférable de mettre à jour votre logiciel.\n"
+
+#~ msgid "Newer 3mf version"
+#~ msgstr "Nouvelle version 3mf"
+
+#, c-format, boost-format
+#~ msgid ""
+#~ "The 3mf's version %s is newer than %s's version %s, Suggest to upgrade "
+#~ "your software."
+#~ msgstr ""
+#~ "La version %s de 3mf est plus récente que la version %s de %s, nous vous "
+#~ "suggérons de mettre à jour votre logiciel."
+
+#~ msgid "Embeded"
+#~ msgstr "Intégré"
+
+#~ msgid ""
+#~ "OrcaSlicer configuration file may be corrupted and is not abled to be "
+#~ "parsed.Please delete the file and try again."
+#~ msgstr ""
+#~ "Le fichier de configuration de Orca Slicer est peut-être corrompu et ne "
+#~ "peut pas être analysé. Veuillez supprimer le fichier et réessayer."
+
 #~ msgid "Online Models"
 #~ msgstr "Modèles en ligne"
 
@@ -12337,17 +12390,6 @@ msgstr ""
 #~ "filament. Veuillez ouvrir la porte avant de l'imprimante avant d'imprimer "
 #~ "pour éviter que la buse ne se bouche."
 
-#~ msgid "Ensure vertical shell thickness"
-#~ msgstr "Veiller à l'épaisseur verticale de la coque"
-
-#~ msgid ""
-#~ "Add solid infill near sloping surfaces to guarantee the vertical shell "
-#~ "thickness (top+bottom solid layers)"
-#~ msgstr ""
-#~ "Ajouter un remplissage solide près des surfaces en pente pour garantir "
-#~ "l'épaisseur verticale de la coque (couches solides supérieures + "
-#~ "inférieures)"
-
 #~ msgid "Temperature of vitrificaiton"
 #~ msgstr "Température de vitrification"
 
@@ -12372,19 +12414,6 @@ msgstr ""
 #~ "auxiliaire fonctionnera à cette vitesse pendant l'impression, à "
 #~ "l'exception des premières couches définies sans refroidissement"
 
-#~ msgid "Detect narrow internal solid infill"
-#~ msgstr "Détecter un remplissage solide étroit"
-
-#~ msgid ""
-#~ "This option will auto detect narrow internal solid infill area. If "
-#~ "enabled, concentric pattern will be used for the area to speed printing "
-#~ "up. Otherwise, rectilinear pattern is used defaultly."
-#~ msgstr ""
-#~ "Cette option détectera automatiquement les zones de remplissage solides "
-#~ "étroits. Si activé, un motif concentrique sera utilisé pour les zones "
-#~ "afin d'accélérer l'impression. Sinon, le motif rectiligne est utilisé par "
-#~ "défaut."
-
 #~ msgid ""
 #~ "Bed temperature for layers except the initial one. Value 0 means the "
 #~ "filament does not support to print on the High Temp"

localization/i18n/hu/OrcaSlicer_hu.po

@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-11-04 14:18+0800\n"
+"POT-Creation-Date: 2023-12-02 01:44+0800\n"
 "Language: hu\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -490,27 +490,12 @@ msgstr "Varratfestés"
 msgid "Remove selection"
 msgstr "Kijelölés törlése"
 
-msgid "Shift + Mouse move up or dowm"
-msgstr "Shift + Mouse move up or dowm"
-
-msgid "Rotate text"
-msgstr "Rotate text"
-
-msgid "Text shape"
-msgstr "Szöveg alakja"
-
 msgid "Font"
 msgstr "Betűtípus"
 
 msgid "Thickness"
 msgstr "Vastagság"
 
-msgid "Input text"
-msgstr "Szöveg"
-
-msgid "Embeded"
-msgstr "Embedded"
-
 msgid "Text Gap"
 msgstr "Text Gap"
 
@@ -522,12 +507,24 @@ msgid ""
 "depth"
 msgstr "Embedded depth"
 
+msgid "Input text"
+msgstr "Szöveg"
+
 msgid "Surface"
 msgstr "Surface"
 
 msgid "Horizontal text"
 msgstr "Horizontal text"
 
+msgid "Shift + Mouse move up or dowm"
+msgstr "Shift + Mouse move up or dowm"
+
+msgid "Rotate text"
+msgstr "Rotate text"
+
+msgid "Text shape"
+msgstr "Szöveg alakja"
+
 msgid "Ctrl+"
 msgstr "Ctrl+"
 
@@ -613,11 +610,6 @@ msgstr ""
 msgid "WebView2 Runtime"
 msgstr ""
 
-msgid ""
-"OrcaSlicer configuration file may be corrupted and is not abled to be parsed."
-"Please delete the file and try again."
-msgstr ""
-
 #, c-format, boost-format
 msgid ""
 "%s\n"
@@ -645,6 +637,13 @@ msgstr "Ez a legújabb verzió."
 msgid "Info"
 msgstr "Infó"
 
+msgid ""
+"The OrcaSlicer configuration file may be corrupted and cannot be parsed.\n"
+"OrcaSlicer has attempted to recreate the configuration file.\n"
+"Please note, application settings will be lost, but printer profiles will "
+"not be affected."
+msgstr ""
+
 msgid "Rebuild"
 msgstr "Újraindítás"
 
@@ -4547,28 +4546,6 @@ msgstr "A konfiguráció nem tölthető be."
 msgid "The 3mf is generated by old Orca Slicer, load geometry data only."
 msgstr ""
 
-#, c-format, boost-format
-msgid ""
-"The 3mf's version %s is newer than %s's version %s, Found following keys "
-"unrecognized:"
-msgstr ""
-"A 3mf fájl %s verziója újabb, mint a(z) %s verziója %s, a következő "
-"ismeretlen kulcsokat találtuk:"
-
-msgid "You'd better upgrade your software.\n"
-msgstr "Jobb lenne, ha frissítenéd a szoftvert.\n"
-
-msgid "Newer 3mf version"
-msgstr "Újabb 3mf verzió"
-
-#, c-format, boost-format
-msgid ""
-"The 3mf's version %s is newer than %s's version %s, Suggest to upgrade your "
-"software."
-msgstr ""
-"A 3mf fájl %s verziója újabb, mint a(z) %s verziója %s, javasolt a szoftver "
-"frissítése."
-
 msgid "Invalid values found in the 3mf:"
 msgstr "Invalid values found in the 3mf:"
 
@@ -6134,6 +6111,9 @@ msgstr ""
 msgid "Change filament G-code"
 msgstr "Filament csere G-kód"
 
+msgid "Change extrusion role G-code"
+msgstr ""
+
 msgid "Pause G-code"
 msgstr "Szünet G-kód"
 
@@ -7637,6 +7617,15 @@ msgstr ""
 "Csökkentsd kicsit ezt az értéket (például 0,9-re), hogy ezzel csökkentsd az "
 "áthidaláshoz használt anyag mennyiségét, és a megereszkedést"
 
+msgid "Internal bridge flow"
+msgstr ""
+
+msgid ""
+"This value governs the thickness of the internal bridge layer. This is the "
+"first layer over sparse infill. Decrease this value slightly (for example "
+"0.9) to improve surface quality over sparse infill."
+msgstr ""
+
 msgid "Top surface flow ratio"
 msgstr ""
 
@@ -7931,6 +7920,15 @@ msgstr ""
 "Ha ki van kapcsolva, az áthidalások jobban néznek ki, de csak a rövidebb "
 "áthidalt távolságokon megbízhatóak."
 
+msgid "Thick internal bridges"
+msgstr ""
+
+msgid ""
+"If enabled, thick internal bridges will be used. It's usually recommended to "
+"have this feature turned on. However, consider turning it off if you are "
+"using large nozzles."
+msgstr ""
+
 msgid "Max bridge length"
 msgstr "Maximum áthidalás hossza"
 
@@ -7953,6 +7951,16 @@ msgstr "Befejező G-kód az egész nyomtatás befejezésekor"
 msgid "End G-code when finish the printing of this filament"
 msgstr "Befejező G-kód a filament nyomtatásának befejezésekor"
 
+msgid "Ensure vertical shell thickness"
+msgstr "Függőleges héjvastagság biztosítása"
+
+msgid ""
+"Add solid infill near sloping surfaces to guarantee the vertical shell "
+"thickness (top+bottom solid layers)"
+msgstr ""
+"A függőleges héjvastagság biztosítása érdekében szilárd kitöltést alkalmaz a "
+"lejtős felületek közelében."
+
 msgid "Top surface pattern"
 msgstr "Felső felület mintázata"
 
@@ -10162,6 +10170,9 @@ msgstr ""
 "Ez a G-kód kerül beillesztésre, amikor a filament csere történik, beleértve "
 "a szerszámváltást indító T parancsokat is."
 
+msgid "This gcode is inserted when the extrusion role is changed"
+msgstr ""
+
 msgid ""
 "Line width for top surfaces. If expressed as a %, it will be computed over "
 "the nozzle diameter."
@@ -10524,6 +10535,19 @@ msgstr ""
 "mint a nyomtatandó elem vastagsága, akkor a fal olyan vastag lesz, mint maga "
 "a nyomtatott elem. A fúvóka átmérőjének százalékában van kifejezve"
 
+msgid "Detect narrow internal solid infill"
+msgstr "Keskeny belső szilárd kitöltés felismerése"
+
+msgid ""
+"This option will auto detect narrow internal solid infill area. If enabled, "
+"concentric pattern will be used for the area to speed printing up. "
+"Otherwise, rectilinear pattern is used defaultly."
+msgstr ""
+"Ez a beállítás automatikusan felismeri a keskeny belső tömör kitöltési "
+"területeket. Ha engedélyezve van, a nyomtatás felgyorsítása érdekében ezen a "
+"területen a koncentrikus mintát fogja használni. Ellenkező esetben "
+"alapértelmezés szerint az egyenes vonalú mintát használja."
+
 msgid "invalid value "
 msgstr "invalid value "
 
@@ -11856,6 +11880,31 @@ msgid ""
 "temperature. More info about this in the Wiki."
 msgstr ""
 
+#, c-format, boost-format
+#~ msgid ""
+#~ "The 3mf's version %s is newer than %s's version %s, Found following keys "
+#~ "unrecognized:"
+#~ msgstr ""
+#~ "A 3mf fájl %s verziója újabb, mint a(z) %s verziója %s, a következő "
+#~ "ismeretlen kulcsokat találtuk:"
+
+#~ msgid "You'd better upgrade your software.\n"
+#~ msgstr "Jobb lenne, ha frissítenéd a szoftvert.\n"
+
+#~ msgid "Newer 3mf version"
+#~ msgstr "Újabb 3mf verzió"
+
+#, c-format, boost-format
+#~ msgid ""
+#~ "The 3mf's version %s is newer than %s's version %s, Suggest to upgrade "
+#~ "your software."
+#~ msgstr ""
+#~ "A 3mf fájl %s verziója újabb, mint a(z) %s verziója %s, javasolt a "
+#~ "szoftver frissítése."
+
+#~ msgid "Embeded"
+#~ msgstr "Embedded"
+
 #~ msgid "Online Models"
 #~ msgstr "Online Models"
 
@@ -11873,16 +11922,6 @@ msgstr ""
 #~ "Kérjük, hogy a nyomtatás során tartsd nyitva a nyomtatót, vagy csökkentsd "
 #~ "az asztalhőmérsékletet."
 
-#~ msgid "Ensure vertical shell thickness"
-#~ msgstr "Függőleges héjvastagság biztosítása"
-
-#~ msgid ""
-#~ "Add solid infill near sloping surfaces to guarantee the vertical shell "
-#~ "thickness (top+bottom solid layers)"
-#~ msgstr ""
-#~ "A függőleges héjvastagság biztosítása érdekében szilárd kitöltést "
-#~ "alkalmaz a lejtős felületek közelében."
-
 #~ msgid "Temperature of vitrificaiton"
 #~ msgstr "Üvegesedési hőmérséklet"
 
@@ -11907,19 +11946,6 @@ msgstr ""
 #~ "ezen a fordulatszámon fog működni a nyomtatás során, kivéve az első "
 #~ "néhány réteget, amelynél kikapcsolt hűtés van megadva"
 
-#~ msgid "Detect narrow internal solid infill"
-#~ msgstr "Keskeny belső szilárd kitöltés felismerése"
-
-#~ msgid ""
-#~ "This option will auto detect narrow internal solid infill area. If "
-#~ "enabled, concentric pattern will be used for the area to speed printing "
-#~ "up. Otherwise, rectilinear pattern is used defaultly."
-#~ msgstr ""
-#~ "Ez a beállítás automatikusan felismeri a keskeny belső tömör kitöltési "
-#~ "területeket. Ha engedélyezve van, a nyomtatás felgyorsítása érdekében "
-#~ "ezen a területen a koncentrikus mintát fogja használni. Ellenkező esetben "
-#~ "alapértelmezés szerint az egyenes vonalú mintát használja."
-
 #~ msgid "Empty layers around bottom are replaced by nearest normal layers."
 #~ msgstr "Az alsó üres rétegeket a legközelebbi normál rétegek váltják fel."
 

localization/i18n/ja/OrcaSlicer_ja.po

@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-11-04 14:18+0800\n"
+"POT-Creation-Date: 2023-12-02 01:44+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -489,27 +489,12 @@ msgstr "継ぎ目ペイント"
 msgid "Remove selection"
 msgstr "選択を削除"
 
-msgid "Shift + Mouse move up or dowm"
-msgstr "Shift + Mouse move up or dowm"
-
-msgid "Rotate text"
-msgstr "Rotate text"
-
-msgid "Text shape"
-msgstr "文字形状"
-
 msgid "Font"
 msgstr "フォント"
 
 msgid "Thickness"
 msgstr "太さ"
 
-msgid "Input text"
-msgstr "テキスト"
-
-msgid "Embeded"
-msgstr "Embedded"
-
 msgid "Text Gap"
 msgstr "Text Gap"
 
@@ -521,12 +506,24 @@ msgid ""
 "depth"
 msgstr "Embedded depth"
 
+msgid "Input text"
+msgstr "テキスト"
+
 msgid "Surface"
 msgstr "Surface"
 
 msgid "Horizontal text"
 msgstr "Horizontal text"
 
+msgid "Shift + Mouse move up or dowm"
+msgstr "Shift + Mouse move up or dowm"
+
+msgid "Rotate text"
+msgstr "Rotate text"
+
+msgid "Text shape"
+msgstr "文字形状"
+
 msgid "Ctrl+"
 msgstr "Ctrl+"
 
@@ -608,11 +605,6 @@ msgstr ""
 msgid "WebView2 Runtime"
 msgstr ""
 
-msgid ""
-"OrcaSlicer configuration file may be corrupted and is not abled to be parsed."
-"Please delete the file and try again."
-msgstr ""
-
 #, c-format, boost-format
 msgid ""
 "%s\n"
@@ -640,6 +632,13 @@ msgstr "最新バージョンです。"
 msgid "Info"
 msgstr "情報"
 
+msgid ""
+"The OrcaSlicer configuration file may be corrupted and cannot be parsed.\n"
+"OrcaSlicer has attempted to recreate the configuration file.\n"
+"Please note, application settings will be lost, but printer profiles will "
+"not be affected."
+msgstr ""
+
 msgid "Rebuild"
 msgstr "再構築"
 
@@ -4444,27 +4443,6 @@ msgstr ""
 "3mfは古いバージョンのOrca Slicerで作成されています、ジオメトリーデータのみ読"
 "込みます。"
 
-#, c-format, boost-format
-msgid ""
-"The 3mf's version %s is newer than %s's version %s, Found following keys "
-"unrecognized:"
-msgstr ""
-"3mfのバージョン %s は %sのバージョン %sより新しい為、下記のキーを認識できませ"
-"ん"
-
-msgid "You'd better upgrade your software.\n"
-msgstr "ソフトウェアをアップデートする必要があります。\n"
-
-msgid "Newer 3mf version"
-msgstr "新3mfバージョン"
-
-#, c-format, boost-format
-msgid ""
-"The 3mf's version %s is newer than %s's version %s, Suggest to upgrade your "
-"software."
-msgstr ""
-"3mfのバージョン%sは%sの%sより新しい為、ソフトウェアを更新してください。"
-
 msgid "Invalid values found in the 3mf:"
 msgstr "Invalid values found in the 3mf:"
 
@@ -5975,6 +5953,9 @@ msgstr ""
 msgid "Change filament G-code"
 msgstr "フィラメント変更G-code"
 
+msgid "Change extrusion role G-code"
+msgstr ""
+
 msgid "Pause G-code"
 msgstr "G-codeを一時停止"
 
@@ -7397,6 +7378,15 @@ msgstr ""
 "この値を少し (例えば 0.9) 小さくし、ブリッジ用に押出し量を減らし、たるみを防"
 "ぎます。"
 
+msgid "Internal bridge flow"
+msgstr ""
+
+msgid ""
+"This value governs the thickness of the internal bridge layer. This is the "
+"first layer over sparse infill. Decrease this value slightly (for example "
+"0.9) to improve surface quality over sparse infill."
+msgstr ""
+
 msgid "Top surface flow ratio"
 msgstr ""
 
@@ -7681,6 +7671,15 @@ msgstr ""
 "有効になる場合、より長いブリッジを造形できますが、仕上がりが劣る可能性があり"
 "ます。"
 
+msgid "Thick internal bridges"
+msgstr ""
+
+msgid ""
+"If enabled, thick internal bridges will be used. It's usually recommended to "
+"have this feature turned on. However, consider turning it off if you are "
+"using large nozzles."
+msgstr ""
+
 msgid "Max bridge length"
 msgstr "最大ブリッジ長さ"
 
@@ -7702,6 +7701,14 @@ msgstr "造形完了時のG-codeを追加"
 msgid "End G-code when finish the printing of this filament"
 msgstr "このフィラメントを使用終わった時のG-codeを追加"
 
+msgid "Ensure vertical shell thickness"
+msgstr "壁の厚さを確保"
+
+msgid ""
+"Add solid infill near sloping surfaces to guarantee the vertical shell "
+"thickness (top+bottom solid layers)"
+msgstr "傾斜面にソリッドインフィルを追加"
+
 msgid "Top surface pattern"
 msgstr "トップ面パターン"
 
@@ -9815,6 +9822,9 @@ msgid ""
 "tool change"
 msgstr "フィラメントを切り替える直後に実行するG-codeです。"
 
+msgid "This gcode is inserted when the extrusion role is changed"
+msgstr ""
+
 msgid ""
 "Line width for top surfaces. If expressed as a %, it will be computed over "
 "the nozzle diameter."
@@ -10153,6 +10163,18 @@ msgstr ""
 "thickness of the feature, the wall will become as thick as the feature "
 "itself. It's expressed as a percentage over nozzle diameter"
 
+msgid "Detect narrow internal solid infill"
+msgstr "薄いソリッド インフィル検出"
+
+msgid ""
+"This option will auto detect narrow internal solid infill area. If enabled, "
+"concentric pattern will be used for the area to speed printing up. "
+"Otherwise, rectilinear pattern is used defaultly."
+msgstr ""
+"ソリッド インフィル領域に狭い部分があるか検出します。その設定を有効にする場"
+"合、狭い領域は同心パターンを使用し、それ以外の領域は、直線パターンを使用しま"
+"す。"
+
 msgid "invalid value "
 msgstr "invalid value "
 
@@ -11461,6 +11483,30 @@ msgid ""
 "temperature. More info about this in the Wiki."
 msgstr ""
 
+#, c-format, boost-format
+#~ msgid ""
+#~ "The 3mf's version %s is newer than %s's version %s, Found following keys "
+#~ "unrecognized:"
+#~ msgstr ""
+#~ "3mfのバージョン %s は %sのバージョン %sより新しい為、下記のキーを認識でき"
+#~ "ません"
+
+#~ msgid "You'd better upgrade your software.\n"
+#~ msgstr "ソフトウェアをアップデートする必要があります。\n"
+
+#~ msgid "Newer 3mf version"
+#~ msgstr "新3mfバージョン"
+
+#, c-format, boost-format
+#~ msgid ""
+#~ "The 3mf's version %s is newer than %s's version %s, Suggest to upgrade "
+#~ "your software."
+#~ msgstr ""
+#~ "3mfのバージョン%sは%sの%sより新しい為、ソフトウェアを更新してください。"
+
+#~ msgid "Embeded"
+#~ msgstr "Embedded"
+
 #~ msgid "Online Models"
 #~ msgstr "Online Models"
 
@@ -11477,14 +11523,6 @@ msgstr ""
 #~ "ベッド温度がフィラメントの軟化温度より高いです、ノズル詰まりが発生する可能"
 #~ "性があります。ベッド温度を下げるか、プリンタのドアを開けてください。"
 
-#~ msgid "Ensure vertical shell thickness"
-#~ msgstr "壁の厚さを確保"
-
-#~ msgid ""
-#~ "Add solid infill near sloping surfaces to guarantee the vertical shell "
-#~ "thickness (top+bottom solid layers)"
-#~ msgstr "傾斜面にソリッドインフィルを追加"
-
 #~ msgid "Temperature of vitrificaiton"
 #~ msgstr "軟化温度"
 
@@ -11504,18 +11542,6 @@ msgstr ""
 #~ "cooling layers"
 #~ msgstr "補助パーツ冷却ファンの回転速度です。"
 
-#~ msgid "Detect narrow internal solid infill"
-#~ msgstr "薄いソリッド インフィル検出"
-
-#~ msgid ""
-#~ "This option will auto detect narrow internal solid infill area. If "
-#~ "enabled, concentric pattern will be used for the area to speed printing "
-#~ "up. Otherwise, rectilinear pattern is used defaultly."
-#~ msgstr ""
-#~ "ソリッド インフィル領域に狭い部分があるか検出します。その設定を有効にする"
-#~ "場合、狭い領域は同心パターンを使用し、それ以外の領域は、直線パターンを使用"
-#~ "します。"
-
 #~ msgid "Empty layers around bottom are replaced by nearest normal layers."
 #~ msgstr "底面との隙間があります、レイヤーを入れ替えました"
 

localization/i18n/ko/OrcaSlicer_ko.po

@@ -7,9 +7,10 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-11-04 14:18+0800\n"
-"PO-Revision-Date: 2023-10-26 16:47+0900\n"
-"Last-Translator: Hotsolidinfill\n"
+"POT-Creation-Date: 2023-12-02 01:44+0800\n"
+"PO-Revision-Date: 2023-11-14 11:26+0900\n"
+"Last-Translator: Hotsolidinfill <138652683+Hotsolidinfill@users.noreply."
+"github.com>, crwusiz <crwusiz@naver.com>\n"
 "Language-Team: \n"
 "Language: ko_KR\n"
 "MIME-Version: 1.0\n"
@@ -495,27 +496,12 @@ msgstr "솔기 칠하기"
 msgid "Remove selection"
 msgstr "선택 삭제"
 
-msgid "Shift + Mouse move up or dowm"
-msgstr "Shift + 마우스 위 or 아래"
-
-msgid "Rotate text"
-msgstr "텍스트 회전"
-
-msgid "Text shape"
-msgstr "텍스트 모양"
-
 msgid "Font"
 msgstr "글꼴"
 
 msgid "Thickness"
 msgstr "두께"
 
-msgid "Input text"
-msgstr "텍스트 입력"
-
-msgid "Embeded"
-msgstr "매입"
-
 msgid "Text Gap"
 msgstr "글자 간격"
 
@@ -529,12 +515,24 @@ msgstr ""
 "내장\n"
 "깊이"
 
+msgid "Input text"
+msgstr "텍스트 입력"
+
 msgid "Surface"
 msgstr "표면"
 
 msgid "Horizontal text"
 msgstr "가로 텍스트"
 
+msgid "Shift + Mouse move up or dowm"
+msgstr "Shift + 마우스 위 or 아래"
+
+msgid "Rotate text"
+msgstr "텍스트 회전"
+
+msgid "Text shape"
+msgstr "텍스트 모양"
+
 msgid "Ctrl+"
 msgstr "Ctrl+"
 
@@ -623,13 +621,6 @@ msgstr ""
 msgid "WebView2 Runtime"
 msgstr "WebView2 런타임"
 
-msgid ""
-"OrcaSlicer configuration file may be corrupted and is not abled to be parsed."
-"Please delete the file and try again."
-msgstr ""
-"OrcaSlicer 구성 파일이 손상되어 구문 분석할 수 없습니다. 파일을 삭제하고 다"
-"시 시도하십시오."
-
 #, c-format, boost-format
 msgid ""
 "%s\n"
@@ -657,6 +648,16 @@ msgstr "최신 버전입니다."
 msgid "Info"
 msgstr "정보"
 
+msgid ""
+"The OrcaSlicer configuration file may be corrupted and cannot be parsed.\n"
+"OrcaSlicer has attempted to recreate the configuration file.\n"
+"Please note, application settings will be lost, but printer profiles will "
+"not be affected."
+msgstr ""
+"OrcaSlicer 구성 파일이 손상되어 구문을 분석할 수 없습니다.\n"
+"OrcaSlicer가 구성 파일을 다시 생성하려고 시도했습니다.\n"
+"응용 프로그램 설정은 손실되지만 프린터 프로필은 영향을 받지 않습니다."
+
 msgid "Rebuild"
 msgstr "재빌드"
 
@@ -4544,28 +4545,6 @@ msgstr "구성을 로드할 수 없습니다."
 msgid "The 3mf is generated by old Orca Slicer, load geometry data only."
 msgstr "이 3mf는 이전 Orca Slicer에서 생성되었으며, 형상 데이터만 로드합니다."
 
-#, c-format, boost-format
-msgid ""
-"The 3mf's version %s is newer than %s's version %s, Found following keys "
-"unrecognized:"
-msgstr ""
-"3mf의 버전 %s이(가) %s의 버전 %s보다 최신입니다. 인식할 수 없는 다음 키를 찾"
-"았습니다:"
-
-msgid "You'd better upgrade your software.\n"
-msgstr "소프트웨어를 업그레이드하는 것이 좋습니다.\n"
-
-msgid "Newer 3mf version"
-msgstr "최신 3mf 버전"
-
-#, c-format, boost-format
-msgid ""
-"The 3mf's version %s is newer than %s's version %s, Suggest to upgrade your "
-"software."
-msgstr ""
-"3mf의 %s 버전이 %s의 %s 버전보다 최신입니다. 소프트웨어를 업그레이드 하십시"
-"오."
-
 msgid "Invalid values found in the 3mf:"
 msgstr "3mf에서 잘못된 값이 발견됨:"
 
@@ -5001,13 +4980,13 @@ msgid "Units"
 msgstr "단위"
 
 msgid "Home"
-msgstr ""
+msgstr "홈"
 
 msgid "Default Page"
-msgstr ""
+msgstr "기본 페이지"
 
 msgid "Set the page opened on startup."
-msgstr ""
+msgstr "시작 시 열리는 페이지를 설정합니다."
 
 msgid "Zoom to mouse position"
 msgstr "마우스 위치로 확대"
@@ -5026,10 +5005,10 @@ msgstr ""
 "카메라 앵글을 사용합니다."
 
 msgid "Show splash screen"
-msgstr ""
+msgstr "스플래시 화면 표시"
 
 msgid "Show the splash screen during startup."
-msgstr ""
+msgstr "시작하는 동안 스플래시 화면을 표시합니다."
 
 msgid "Show \"Tip of the day\" notification after start"
 msgstr "시작 후 \"오늘의 팁\" 알림 표시"
@@ -6096,6 +6075,9 @@ msgstr "타임랩스 G코드"
 msgid "Change filament G-code"
 msgstr "필라멘트 교체 G코드"
 
+msgid "Change extrusion role G-code"
+msgstr "압출 역할 G코드 변경"
+
 msgid "Pause G-code"
 msgstr "일시정지 G코드"
 
@@ -7579,6 +7561,15 @@ msgid ""
 "material for bridge, to improve sag"
 msgstr "이 값을 약간(예: 0.9) 줄여 다리의 압출량을 줄여 처짐을 개선합니다"
 
+msgid "Internal bridge flow"
+msgstr ""
+
+msgid ""
+"This value governs the thickness of the internal bridge layer. This is the "
+"first layer over sparse infill. Decrease this value slightly (for example "
+"0.9) to improve surface quality over sparse infill."
+msgstr ""
+
 msgid "Top surface flow ratio"
 msgstr "상단 표면 유량 비율"
 
@@ -7698,7 +7689,7 @@ msgid "Enable this option to slow printing down for different overhang degree"
 msgstr "돌출부 정도에 따라 출력 속도를 낮추려면 이 옵션을 활성화합니다"
 
 msgid "Slow down for curled perimeters"
-msgstr "꺾여 있는 둘레에는 속도를 줄이세요"
+msgstr "꺾여 있는 둘레에서 감속"
 
 msgid ""
 "Enable this option to slow printing down in areas where potential curled "
@@ -7896,6 +7887,15 @@ msgstr ""
 "습니다. 비활성화하면 다리가 더 좋아 보이지만 짧은 브리지 거리에 대해서만 안정"
 "적입니다."
 
+msgid "Thick internal bridges"
+msgstr ""
+
+msgid ""
+"If enabled, thick internal bridges will be used. It's usually recommended to "
+"have this feature turned on. However, consider turning it off if you are "
+"using large nozzles."
+msgstr ""
+
 msgid "Max bridge length"
 msgstr "최대 다리 거리"
 
@@ -7916,6 +7916,16 @@ msgstr "전체 출력이 끝날때의 End G-code"
 msgid "End G-code when finish the printing of this filament"
 msgstr "이 필라멘트의 출력이 끝날때의 End G-code"
 
+msgid "Ensure vertical shell thickness"
+msgstr "수직 쉘 두께 확보"
+
+msgid ""
+"Add solid infill near sloping surfaces to guarantee the vertical shell "
+"thickness (top+bottom solid layers)"
+msgstr ""
+"경사진 표면 근처에 꽉찬 내부 채움을 추가하여 수직 쉘 두께를 보장합니다(상단"
+"+하단 꽉찬 레이어)"
+
 msgid "Top surface pattern"
 msgstr "상단 표면 패턴"
 
@@ -9245,6 +9255,8 @@ msgid ""
 "cooling is enabled, when printing overhangs and when feature speeds are not "
 "specified explicitly."
 msgstr ""
+"보다 나은 레이어 냉각을 위해 속도를 늦출 때, 돌출부 출력 속도가 명시적으로 지"
+"정되지 않은 경우 필라멘트의 최소 출력 속도가 활성화됩니다."
 
 msgid "Nozzle diameter"
 msgstr "노즐 직경"
@@ -10277,6 +10289,9 @@ msgstr ""
 "이 G코드는 도구 변경을 유발하는 T 명령을 포함하여 필라멘트를 변경할 때 삽입됩"
 "니다"
 
+msgid "This gcode is inserted when the extrusion role is changed"
+msgstr "이 G코드는 압출 역할이 변경될 때 삽입됩니다."
+
 msgid ""
 "Line width for top surfaces. If expressed as a %, it will be computed over "
 "the nozzle diameter."
@@ -10646,6 +10661,18 @@ msgstr ""
 "비가 형상의 두께보다 얇은 경우 벽은 형상 자체만큼 두꺼워집니다. 노즐 직경에 "
 "대한 백분율로 표시됩니다"
 
+msgid "Detect narrow internal solid infill"
+msgstr "좁은 내부 꽉찬 내부 채움 감지"
+
+msgid ""
+"This option will auto detect narrow internal solid infill area. If enabled, "
+"concentric pattern will be used for the area to speed printing up. "
+"Otherwise, rectilinear pattern is used defaultly."
+msgstr ""
+"이 옵션은 좁은 내부 꽉찬 내부 채움 영역을 자동으로 감지합니다. 활성화하면 출"
+"력 속도를 높이기 위해 해당 영역에 동심 패턴이 사용됩니다. 그렇지 않으면 직선 "
+"패턴이 기본적으로 사용됩니다."
+
 msgid "invalid value "
 msgstr "잘못된 값 "
 
@@ -12088,6 +12115,38 @@ msgstr ""
 "기/핫엔드가 막힐 가능성을 줄일 수 있습니다. 이에 대한 자세한 내용은 Wiki에서 "
 "확인하세요."
 
+#, c-format, boost-format
+#~ msgid ""
+#~ "The 3mf's version %s is newer than %s's version %s, Found following keys "
+#~ "unrecognized:"
+#~ msgstr ""
+#~ "3mf의 버전 %s이(가) %s의 버전 %s보다 최신입니다. 인식할 수 없는 다음 키를 "
+#~ "찾았습니다:"
+
+#~ msgid "You'd better upgrade your software.\n"
+#~ msgstr "소프트웨어를 업그레이드하는 것이 좋습니다.\n"
+
+#~ msgid "Newer 3mf version"
+#~ msgstr "최신 3mf 버전"
+
+#, c-format, boost-format
+#~ msgid ""
+#~ "The 3mf's version %s is newer than %s's version %s, Suggest to upgrade "
+#~ "your software."
+#~ msgstr ""
+#~ "3mf의 %s 버전이 %s의 %s 버전보다 최신입니다. 소프트웨어를 업그레이드 하십"
+#~ "시오."
+
+#~ msgid "Embeded"
+#~ msgstr "매입"
+
+#~ msgid ""
+#~ "OrcaSlicer configuration file may be corrupted and is not abled to be "
+#~ "parsed.Please delete the file and try again."
+#~ msgstr ""
+#~ "OrcaSlicer 구성 파일이 손상되어 구문 분석할 수 없습니다. 파일을 삭제하고 "
+#~ "다시 시도하십시오."
+
 #~ msgid "Online Models"
 #~ msgstr "온라인 모델"
 
@@ -12140,16 +12199,6 @@ msgstr ""
 #~ msgid "Activate for better air filtration"
 #~ msgstr "더 나은 공기 여과를 위해 활성화하세요"
 
-#~ msgid "Ensure vertical shell thickness"
-#~ msgstr "수직 쉘 두께 확보"
-
-#~ msgid ""
-#~ "Add solid infill near sloping surfaces to guarantee the vertical shell "
-#~ "thickness (top+bottom solid layers)"
-#~ msgstr ""
-#~ "경사진 표면 근처에 꽉찬 내부 채움을 추가하여 수직 쉘 두께를 보장합니다(상"
-#~ "단+하단 꽉찬 레이어)"
-
 #~ msgid "Temperature of vitrificaiton"
 #~ msgstr "유리 전이 온도"
 
@@ -12178,18 +12227,6 @@ msgstr ""
 #~ "보조 출력 냉각 팬의 속도입니다. 냉각 중지 레이어로 정의된 처음 몇 개의 레"
 #~ "이어를 제외하고 출력 중에 보조 팬이 이 속도로 작동됩니다"
 
-#~ msgid "Detect narrow internal solid infill"
-#~ msgstr "좁은 내부 꽉찬 내부 채움 감지"
-
-#~ msgid ""
-#~ "This option will auto detect narrow internal solid infill area. If "
-#~ "enabled, concentric pattern will be used for the area to speed printing "
-#~ "up. Otherwise, rectilinear pattern is used defaultly."
-#~ msgstr ""
-#~ "이 옵션은 좁은 내부 꽉찬 내부 채움 영역을 자동으로 감지합니다. 활성화하면 "
-#~ "출력 속도를 높이기 위해 해당 영역에 동심 패턴이 사용됩니다. 그렇지 않으면 "
-#~ "직선 패턴이 기본적으로 사용됩니다."
-
 #~ msgid ""
 #~ "Filter out gaps smaller than the threshold specified. This setting won't "
 #~ "affect top/bottom layers"

localization/i18n/nl/OrcaSlicer_nl.po

@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-11-04 14:18+0800\n"
+"POT-Creation-Date: 2023-12-02 01:44+0800\n"
 "Language: nl\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -492,28 +492,12 @@ msgstr "Naad schilderen"
 msgid "Remove selection"
 msgstr "Selectie verwijderen"
 
-msgid "Shift + Mouse move up or dowm"
-msgstr "Shift + Muis op of neer"
-
-msgid "Rotate text"
-msgstr "Draai tekst"
-
-msgid "Text shape"
-msgstr "Tekstvorm"
-
 msgid "Font"
 msgstr "Lettertype"
 
 msgid "Thickness"
 msgstr "Dikte"
 
-msgid "Input text"
-msgstr "Tekst invoeren"
-
-# Source and destination string both English but don't match!
-msgid "Embeded"
-msgstr "Embedded"
-
 msgid "Text Gap"
 msgstr "Tekstruimte"
 
@@ -525,12 +509,24 @@ msgid ""
 "depth"
 msgstr "Embedded depth"
 
+msgid "Input text"
+msgstr "Tekst invoeren"
+
 msgid "Surface"
 msgstr "Oppervlak"
 
 msgid "Horizontal text"
 msgstr "Horizontale tekst"
 
+msgid "Shift + Mouse move up or dowm"
+msgstr "Shift + Muis op of neer"
+
+msgid "Rotate text"
+msgstr "Draai tekst"
+
+msgid "Text shape"
+msgstr "Tekstvorm"
+
 msgid "Ctrl+"
 msgstr "Ctrl+"
 
@@ -623,13 +619,6 @@ msgstr ""
 msgid "WebView2 Runtime"
 msgstr "WebView2 Runtime"
 
-msgid ""
-"OrcaSlicer configuration file may be corrupted and is not abled to be parsed."
-"Please delete the file and try again."
-msgstr ""
-"OrcaSlicer configuratiebestand is mogelijks corrupt, en kan niet verwerkt "
-"worden.Verwijder het configuratiebestand en probeer het opnieuw."
-
 #, c-format, boost-format
 msgid ""
 "%s\n"
@@ -658,6 +647,13 @@ msgstr "Dit is de nieuwste versie."
 msgid "Info"
 msgstr "Informatie"
 
+msgid ""
+"The OrcaSlicer configuration file may be corrupted and cannot be parsed.\n"
+"OrcaSlicer has attempted to recreate the configuration file.\n"
+"Please note, application settings will be lost, but printer profiles will "
+"not be affected."
+msgstr ""
+
 msgid "Rebuild"
 msgstr "Herbouwen"
 
@@ -4592,28 +4588,6 @@ msgstr "De configuratie kan niet worden geladen."
 msgid "The 3mf is generated by old Orca Slicer, load geometry data only."
 msgstr ""
 
-#, c-format, boost-format
-msgid ""
-"The 3mf's version %s is newer than %s's version %s, Found following keys "
-"unrecognized:"
-msgstr ""
-"Versie %s van de 3mf is nieuwer dan versie %s van %s. De volgende sleutels "
-"worden niet herkend:"
-
-msgid "You'd better upgrade your software.\n"
-msgstr "U dient de software te upgraden.\n"
-
-msgid "Newer 3mf version"
-msgstr "Nieuwere versie 3mf"
-
-#, c-format, boost-format
-msgid ""
-"The 3mf's version %s is newer than %s's version %s, Suggest to upgrade your "
-"software."
-msgstr ""
-"Versie %s van de 3mf is nieuwer dan versie %s van %s. Wij stellen voor om uw "
-"software te upgraden."
-
 msgid "Invalid values found in the 3mf:"
 msgstr "Invalid values found in the 3mf:"
 
@@ -6207,6 +6181,9 @@ msgstr ""
 msgid "Change filament G-code"
 msgstr "Filament G-code aanpassen"
 
+msgid "Change extrusion role G-code"
+msgstr ""
+
 msgid "Pause G-code"
 msgstr "Pauzeer G-code"
 
@@ -7725,6 +7702,15 @@ msgstr ""
 "Verlaag deze waarde iets (bijvoorbeeld 0,9) om de hoeveelheid materiaal voor "
 "bruggen te verminderen, dit om doorzakken te voorkomen."
 
+msgid "Internal bridge flow"
+msgstr ""
+
+msgid ""
+"This value governs the thickness of the internal bridge layer. This is the "
+"first layer over sparse infill. Decrease this value slightly (for example "
+"0.9) to improve surface quality over sparse infill."
+msgstr ""
+
 msgid "Top surface flow ratio"
 msgstr ""
 
@@ -8023,6 +8009,15 @@ msgstr ""
 "uitgeschakeld, zien bruggen er beter uit, maar zijn ze alleen betrouwbaar "
 "voor kortere afstanden."
 
+msgid "Thick internal bridges"
+msgstr ""
+
+msgid ""
+"If enabled, thick internal bridges will be used. It's usually recommended to "
+"have this feature turned on. However, consider turning it off if you are "
+"using large nozzles."
+msgstr ""
+
 msgid "Max bridge length"
 msgstr "Maximale bruglengte"
 
@@ -8045,6 +8040,16 @@ msgid "End G-code when finish the printing of this filament"
 msgstr ""
 "Voeg een eind G-code toe bij het afronden van het printen van dit filament."
 
+msgid "Ensure vertical shell thickness"
+msgstr "Zorg voor een verticale schaaldikte"
+
+msgid ""
+"Add solid infill near sloping surfaces to guarantee the vertical shell "
+"thickness (top+bottom solid layers)"
+msgstr ""
+"Voeg dichte vulling toe in de buurt van hellende oppervlakken om de "
+"verticale schaaldikte te garanderen (boven+onder vaste lagen)."
+
 msgid "Top surface pattern"
 msgstr "Patroon bovenvlak"
 
@@ -10276,6 +10281,9 @@ msgstr ""
 "Deze G-code wordt ingevoegd wanneer filament wordt vervangen, inclusief T-"
 "commando's om gereedschapswissel te activeren."
 
+msgid "This gcode is inserted when the extrusion role is changed"
+msgstr ""
+
 msgid ""
 "Line width for top surfaces. If expressed as a %, it will be computed over "
 "the nozzle diameter."
@@ -10645,6 +10653,19 @@ msgstr ""
 "van het element, wordt de muur net zo dik als het object zelf. Dit wordt "
 "uitgedrukt als een percentage ten opzichte van de diameter van de nozzle"
 
+msgid "Detect narrow internal solid infill"
+msgstr "Detecteer dichte interne solide vulling (infill)"
+
+msgid ""
+"This option will auto detect narrow internal solid infill area. If enabled, "
+"concentric pattern will be used for the area to speed printing up. "
+"Otherwise, rectilinear pattern is used defaultly."
+msgstr ""
+"Deze optie detecteert automatisch smalle interne solide opvul (infill) "
+"gebieden. Indien ingeschakeld, wordt het concentrische patroon gebruikt voor "
+"het gebied om het afdrukken te versnellen. Anders wordt standaard het "
+"rechtlijnige patroon gebruikt."
+
 msgid "invalid value "
 msgstr "invalid value "
 
@@ -11977,6 +11998,39 @@ msgid ""
 "temperature. More info about this in the Wiki."
 msgstr ""
 
+#, c-format, boost-format
+#~ msgid ""
+#~ "The 3mf's version %s is newer than %s's version %s, Found following keys "
+#~ "unrecognized:"
+#~ msgstr ""
+#~ "Versie %s van de 3mf is nieuwer dan versie %s van %s. De volgende "
+#~ "sleutels worden niet herkend:"
+
+#~ msgid "You'd better upgrade your software.\n"
+#~ msgstr "U dient de software te upgraden.\n"
+
+#~ msgid "Newer 3mf version"
+#~ msgstr "Nieuwere versie 3mf"
+
+#, c-format, boost-format
+#~ msgid ""
+#~ "The 3mf's version %s is newer than %s's version %s, Suggest to upgrade "
+#~ "your software."
+#~ msgstr ""
+#~ "Versie %s van de 3mf is nieuwer dan versie %s van %s. Wij stellen voor om "
+#~ "uw software te upgraden."
+
+# Source and destination string both English but don't match!
+#~ msgid "Embeded"
+#~ msgstr "Embedded"
+
+#~ msgid ""
+#~ "OrcaSlicer configuration file may be corrupted and is not abled to be "
+#~ "parsed.Please delete the file and try again."
+#~ msgstr ""
+#~ "OrcaSlicer configuratiebestand is mogelijks corrupt, en kan niet verwerkt "
+#~ "worden.Verwijder het configuratiebestand en probeer het opnieuw."
+
 #~ msgid "Online Models"
 #~ msgstr "Online Models"
 
@@ -11994,16 +12048,6 @@ msgstr ""
 #~ "filament. Open de voorkdeur van de printer voor het printen om "
 #~ "verstopping van de nozzles te voorkomen."
 
-#~ msgid "Ensure vertical shell thickness"
-#~ msgstr "Zorg voor een verticale schaaldikte"
-
-#~ msgid ""
-#~ "Add solid infill near sloping surfaces to guarantee the vertical shell "
-#~ "thickness (top+bottom solid layers)"
-#~ msgstr ""
-#~ "Voeg dichte vulling toe in de buurt van hellende oppervlakken om de "
-#~ "verticale schaaldikte te garanderen (boven+onder vaste lagen)."
-
 #~ msgid "Temperature of vitrificaiton"
 #~ msgstr "Temperatuur van verglazing"
 
@@ -12028,19 +12072,6 @@ msgstr ""
 #~ "op deze snelheid tijdens het afdrukken, behalve de eerste paar lagen, die "
 #~ "worden gedefinieerd door geen koellagen"
 
-#~ msgid "Detect narrow internal solid infill"
-#~ msgstr "Detecteer dichte interne solide vulling (infill)"
-
-#~ msgid ""
-#~ "This option will auto detect narrow internal solid infill area. If "
-#~ "enabled, concentric pattern will be used for the area to speed printing "
-#~ "up. Otherwise, rectilinear pattern is used defaultly."
-#~ msgstr ""
-#~ "Deze optie detecteert automatisch smalle interne solide opvul (infill) "
-#~ "gebieden. Indien ingeschakeld, wordt het concentrische patroon gebruikt "
-#~ "voor het gebied om het afdrukken te versnellen. Anders wordt standaard "
-#~ "het rechtlijnige patroon gebruikt."
-
 #~ msgid "Empty layers around bottom are replaced by nearest normal layers."
 #~ msgstr ""
 #~ "Lege lagen in de buurt van de bodem worden vervangen door de "

localization/i18n/ru/OrcaSlicer_ru.po

@@ -5,10 +5,10 @@
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: OrcaSlicer V1.8.0 beta1\n"
+"Project-Id-Version: OrcaSlicer V1.8.0 Official Release\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-11-04 14:18+0800\n"
-"PO-Revision-Date: 2023-10-31 14:13+0700\n"
+"POT-Creation-Date: 2023-12-02 01:44+0800\n"
+"PO-Revision-Date: 2023-11-20 01:07+0700\n"
 "Last-Translator: Andylg <andylg@yandex.ru>\n"
 "Language-Team: \n"
 "Language: ru_RU\n"
@@ -168,7 +168,9 @@ msgid "Triangle"
 msgstr "Треугольник"
 
 msgid "Height Range"
-msgstr "Диапазон высоты слоёв"
+msgstr ""
+"Диапазон \n"
+"высоты слоёв"
 
 # +++++++++++++++++++++
 msgid "Vertical"
@@ -498,27 +500,12 @@ msgstr "Рисование шва"
 msgid "Remove selection"
 msgstr "Удаление выделенного"
 
-msgid "Shift + Mouse move up or dowm"
-msgstr "Shift + Мышь вверх или вниз"
-
-msgid "Rotate text"
-msgstr "Поворот текста"
-
-msgid "Text shape"
-msgstr "Форма текста"
-
 msgid "Font"
 msgstr "Шрифт"
 
 msgid "Thickness"
 msgstr "Толщина"
 
-msgid "Input text"
-msgstr "Введите текст"
-
-msgid "Embeded"
-msgstr "Проникновение"
-
 msgid "Text Gap"
 msgstr ""
 "Межбуквенный \n"
@@ -534,12 +521,24 @@ msgstr ""
 "Глубина\n"
 "проникновения"
 
+msgid "Input text"
+msgstr "Введите текст"
+
 msgid "Surface"
 msgstr "На поверхности"
 
 msgid "Horizontal text"
 msgstr "Горизонтальный текст"
 
+msgid "Shift + Mouse move up or dowm"
+msgstr "Shift + Мышь вверх или вниз"
+
+msgid "Rotate text"
+msgstr "Поворот текста"
+
+msgid "Text shape"
+msgstr "Форма текста"
+
 msgid "Ctrl+"
 msgstr "Ctrl+"
 
@@ -630,13 +629,6 @@ msgstr ""
 msgid "WebView2 Runtime"
 msgstr "WebView2 Runtime"
 
-msgid ""
-"OrcaSlicer configuration file may be corrupted and is not abled to be parsed."
-"Please delete the file and try again."
-msgstr ""
-"Возможно, файл конфигурации OrcaSlicer повреждён и не может быть обработан. "
-"Пожалуйста, удалите файл и повторите попытку."
-
 #, c-format, boost-format
 msgid ""
 "%s\n"
@@ -665,6 +657,17 @@ msgstr "У вас стоит самая последняя версия."
 msgid "Info"
 msgstr "Информация"
 
+msgid ""
+"The OrcaSlicer configuration file may be corrupted and cannot be parsed.\n"
+"OrcaSlicer has attempted to recreate the configuration file.\n"
+"Please note, application settings will be lost, but printer profiles will "
+"not be affected."
+msgstr ""
+"Возможно, файл конфигурации OrcaSlicer повреждён и не может быть обработан.\n"
+"OrcaSlicer попытался воссоздать файл конфигурации.\n"
+"Обратите внимание, что настройки приложения будут потеряны, но профили "
+"принтера не будут затронуты."
+
 msgid "Rebuild"
 msgstr "Пересоздание"
 
@@ -1341,7 +1344,7 @@ msgstr "Ремонт был отменён"
 
 # ???
 msgid "Additional process preset"
-msgstr "Дополнительная конфигурация процесса"
+msgstr "Доп. настройки профиля процесса"
 
 msgid "Remove parameter"
 msgstr "Удалить параметр"
@@ -1607,7 +1610,7 @@ msgstr "Очистка от старого материала"
 msgid "Feed Filament"
 msgstr "Подача прутка"
 
-# ??? Подтвердить
+# ??? Подтвердить, Подтвердите
 msgid "Confirm extruded"
 msgstr "Подтверждение экструзии"
 
@@ -1979,7 +1982,7 @@ msgid "max"
 msgstr "макс."
 
 msgid "min"
-msgstr "мин"
+msgstr "мин."
 
 #, boost-format
 msgid "The input value should be greater than %1% and less than %2%"
@@ -2014,12 +2017,12 @@ msgid "You need to select the material type and color first."
 msgstr "Сначала необходимо выбрать тип материала и цвет."
 
 msgid "Please input a valid value (K in 0~0.5)"
-msgstr "Пожалуйста, введите допустимое значение (K в диапазоне 0~0,5)"
+msgstr "Пожалуйста, введите допустимое значение (K в диапазоне 0~0.5)"
 
 msgid "Please input a valid value (K in 0~0.5, N in 0.6~2.0)"
 msgstr ""
-"Пожалуйста, введите допустимое значение (K в диапазоне 0~0,5, N в диапазоне "
-"0,6~2,0)"
+"Пожалуйста, введите допустимое значение (K в диапазоне 0~0.5, N в диапазоне "
+"0.6~2.0)"
 
 msgid "Other Color"
 msgstr "Другой цвет"
@@ -2108,11 +2111,11 @@ msgstr "Шаг"
 msgid "AMS Slots"
 msgstr "Слоты АСПП"
 
+# ??? Замечание: разрешён выбор только слотов АСПП с одинаковым типом материала.
 msgid ""
 "Note: Only the AMS slots loaded with the same material type can be selected."
 msgstr ""
-"Примечание: можно выбрать только слоты АСПП, загруженные одним и тем же "
-"типом материала."
+"Замечание: можно выбирать только слоты АСПП с одинаковым типом материала."
 
 msgid "Enable AMS"
 msgstr "Включить АСПП"
@@ -2213,10 +2216,10 @@ msgid ""
 "(Currently supporting automatic supply of consumables with the same brand, "
 "material type, and color)"
 msgstr ""
-"Если в АСПП имеются два одинаковых материала, то будет включено "
-"резервирование материала АСПП. \n"
-"(В настоящее время поддерживается автоматическая поставка расходных "
-"материалов того же производителя, типа материала и цвета)."
+"При наличии в АСПП двух одинаковых материалов включается функция "
+"резервирования материала (автодозаправка). \n"
+"(В настоящее время поддерживается автоматическая дозаправка материала только "
+"одного производителя, типа и цвета)"
 
 msgid "AMS Settings"
 msgstr "Настройки АСПП"
@@ -2706,7 +2709,7 @@ msgstr "Пауза при неисправности температуры ст
 msgid "Filament unloading"
 msgstr "Выгрузка прутка"
 
-# ??? Пауза при пропуске шагов
+# ???
 msgid "Skip step pause"
 msgstr "Пропуск команды паузы"
 
@@ -2726,14 +2729,13 @@ msgstr ""
 msgid "Paused due to chamber temperature control error"
 msgstr "Печать приостановлена из-за ошибки контроля температуры в камере"
 
-# ??? или Снижение температуры
 msgid "Cooling chamber"
 msgstr "Охлаждение камеры"
 
 msgid "Paused by the Gcode inserted by user"
 msgstr "Печать приостановлена G-кодом, вставленным пользователем"
 
-# Демонстрация шума двигателяы
+# Демонстрация шума двигателя
 msgid "Motor noise showoff"
 msgstr "Результат калибровки шума двигателя"
 
@@ -2840,7 +2842,7 @@ msgstr ""
 "АСПП, поэтому используйте их с осторожностью."
 
 msgid "default"
-msgstr "По умолчанию"
+msgstr "По ум."
 
 msgid "parameter name"
 msgstr "Имя параметра"
@@ -2942,8 +2944,9 @@ msgstr "Очищено"
 msgid "Total"
 msgstr "Общее"
 
+# ++++++++++++++++++++++++++++ beta2
 msgid "Total Estimation"
-msgstr ""
+msgstr "Общая оценка"
 
 msgid "Total time"
 msgstr "Общее время печати"
@@ -3147,7 +3150,7 @@ msgid "Avoid extrusion calibration region"
 msgstr "Избегать зону калибровки экструзии"
 
 msgid "Align to Y axis"
-msgstr "Выровнять по оси Y"
+msgstr "Выравнивать по оси Y"
 
 msgid "Add"
 msgstr "Добавить"
@@ -3496,7 +3499,7 @@ msgid "Export all objects as STL"
 msgstr "Экспортировать все модели в STL"
 
 msgid "Export Generic 3MF"
-msgstr "Экспортировать в общий 3MF"
+msgstr "Экспорт в общий 3MF"
 
 msgid "Export 3mf file without using some 3mf-extensions"
 msgstr "Экспорт в 3mf без использования 3mf-расширений"
@@ -3505,16 +3508,16 @@ msgid "Export current sliced file"
 msgstr "Экспортировать текущий нарезанный файл"
 
 msgid "Export all plate sliced file"
-msgstr "Экспортировать все нарезанные столы в файл"
+msgstr "Экспорт всех нарезанных столов в файл"
 
 msgid "Export G-code"
-msgstr "Экспортировать в G-код"
+msgstr "Экспорт в G-код"
 
 msgid "Export current plate as G-code"
 msgstr "Экспортировать текущие модели со стола в G-код"
 
 msgid "Export &Configs"
-msgstr "Экспортировать конфигурации"
+msgstr "Экспорт конфигурации"
 
 msgid "Export current configuration to files"
 msgstr "Экспортировать текущую конфигурацию в файл"
@@ -3592,7 +3595,7 @@ msgid "Show &Overhang"
 msgstr "Показать &нависания"
 
 msgid "Show object overhang highlight in 3D scene"
-msgstr "Подсвечивать нависания у модели в 3D сцене"
+msgstr "Подсвечивать нависания у модели в 3D-сцене"
 
 msgid "Preferences"
 msgstr "Параметры"
@@ -4478,7 +4481,6 @@ msgstr "Проверка первого слоя"
 msgid "Auto-recovery from step loss"
 msgstr "Автовосстановление после потери шагов"
 
-# оповещения, подсказки???
 msgid "Allow Prompt Sound"
 msgstr "Разрешить звуковые уведомления"
 
@@ -4684,28 +4686,6 @@ msgstr ""
 "Этот 3mf создан в старой версии Orca Slicer, поэтому загрузятся только "
 "данные геометрии."
 
-#, c-format, boost-format
-msgid ""
-"The 3mf's version %s is newer than %s's version %s, Found following keys "
-"unrecognized:"
-msgstr ""
-"Версия этого формата 3mf (%s) новее текущей версии %s (%s). \n"
-"Обнаружены следующие нераспознанные ключи:"
-
-msgid "You'd better upgrade your software.\n"
-msgstr "Рекомендуем вам обновить программу.\n"
-
-msgid "Newer 3mf version"
-msgstr "Новая версия 3mf"
-
-#, c-format, boost-format
-msgid ""
-"The 3mf's version %s is newer than %s's version %s, Suggest to upgrade your "
-"software."
-msgstr ""
-"Версия этого формата 3mf (%s) новее текущей версии %s (%s). \n"
-"Рекомендуется обновить программу."
-
 msgid "Invalid values found in the 3mf:"
 msgstr "В файле 3mf найдены недопустимые значения:"
 
@@ -4946,7 +4926,7 @@ msgid "G-code loading"
 msgstr "Загрузка G-кода"
 
 msgid "G-code files can not be loaded with models together!"
-msgstr "Одновременная загрузка файла G-кода и модели не возможна!"
+msgstr "Одновременная загрузка файла G-кода и модели невозможна!"
 
 msgid "Can not add models when in preview mode!"
 msgstr "В режиме предпросмотра добавление моделей недоступно!"
@@ -5139,7 +5119,7 @@ msgid "Login Region"
 msgstr "Регион входа"
 
 msgid "Stealth Mode"
-msgstr "Режим конфиденциальности (отключение телеметрии Bambulab)."
+msgstr "Режим конфиденциальности (отключение телеметрии Bambulab)"
 
 msgid "Metric"
 msgstr "Метрическая СИ"
@@ -5153,13 +5133,15 @@ msgstr ""
 "измерения"
 
 msgid "Home"
-msgstr ""
+msgstr "Домашняя страница"
 
 msgid "Default Page"
 msgstr ""
+"Страница \n"
+"по умолчанию"
 
 msgid "Set the page opened on startup."
-msgstr ""
+msgstr "Задание страницы, открываемой при запуске приложения."
 
 msgid "Zoom to mouse position"
 msgstr "Приближать к положению курсор"
@@ -5180,10 +5162,10 @@ msgstr ""
 "используется вращение камера с ограничениями."
 
 msgid "Show splash screen"
-msgstr ""
+msgstr "Показывать окно приветствия"
 
 msgid "Show the splash screen during startup."
-msgstr ""
+msgstr "Показывать окно приветствия при запуске приложения."
 
 msgid "Show \"Tip of the day\" notification after start"
 msgstr "Показывать уведомление с полезным советом при запуске приложения"
@@ -5249,7 +5231,7 @@ msgstr "Максимальное количество недавних прое
 
 msgid "Maximum count of recent projects"
 msgstr ""
-"Максимальное количество проектов отображаемое в списке недавних проектов."
+"Максимальное количество проектов, отображаемое в списке недавних проектов."
 
 msgid "Clear my choice on the unsaved projects."
 msgstr "Очистить мой выбор от несохранённых проектов."
@@ -5590,13 +5572,13 @@ msgid "Busy"
 msgstr "Занят"
 
 msgid "Bambu Cool Plate"
-msgstr "Не нагреваемая пластина Bamabu"
+msgstr "Не нагреваемая пластина Bambu"
 
 msgid "PLA Plate"
 msgstr "PLA пластина"
 
 msgid "Bambu Engineering Plate"
-msgstr "Инженерная пластина Bamabu"
+msgstr "Инженерная пластина Bambu"
 
 msgid "Bambu Smooth PEI Plate"
 msgstr "Гладкая PEI пластина Bambu"
@@ -5605,7 +5587,7 @@ msgid "High temperature Plate"
 msgstr "Высокотемпературная пластина"
 
 msgid "Bambu Textured PEI Plate"
-msgstr "Текстурированная PEI пластина Bambu "
+msgstr "Текстурированная PEI пластина Bambu"
 
 msgid "Send print job to"
 msgstr "Отправка задания на печать"
@@ -5624,7 +5606,7 @@ msgstr ""
 "динамики потока"
 
 msgid "Click here if you can't connect to the printer"
-msgstr "Нажмите здесь, если вы не можете подключиться к принтеру"
+msgstr "Не удаётся подключиться к принтеру?"
 
 msgid "send completed"
 msgstr "отправка завершена"
@@ -5641,7 +5623,8 @@ msgstr ""
 
 msgid "No login account, only printers in LAN mode are displayed"
 msgstr ""
-"Без входа в учётную запись, отображаются только принтеры в локальной сети."
+"Без входа в учётную запись, отображаются только \n"
+"принтеры в локальной сети."
 
 msgid "Connecting to server"
 msgstr "Подключение к серверу"
@@ -6313,6 +6296,9 @@ msgstr "G-код таймлапса"
 msgid "Change filament G-code"
 msgstr "G-код выполняемый при смене прутка"
 
+msgid "Change extrusion role G-code"
+msgstr "G-код выполняемый при смене роли экструзии"
+
 msgid "Pause G-code"
 msgstr "G-код паузы печати"
 
@@ -6375,12 +6361,12 @@ msgstr[2] "Следующие профили также будут удален
 
 #, boost-format
 msgid "Are you sure to %1% the selected preset?"
-msgstr "Вы уверены, что хотите %1% выбранный профиль?"
+msgstr "%1% выбранный профиль?"
 
 #. TRN  Remove/Delete
 #, boost-format
 msgid "%1% Preset"
-msgstr "Профиль %1%"
+msgstr "%1% профиль"
 
 msgid "All"
 msgstr "Все"
@@ -6699,7 +6685,7 @@ msgstr ""
 "устройств 3Dconnexion"
 
 msgid "Show keyboard shortcuts list"
-msgstr "Показать список клавиш доступа к командам"
+msgstr "Показать список сочетаний клавиш"
 
 msgid "Global shortcuts"
 msgstr "Глобальные горячие клавиши"
@@ -7862,6 +7848,15 @@ msgstr ""
 "печати некоторых моделей уменьшение параметра может сократить провисание "
 "пластика при печати мостов."
 
+msgid "Internal bridge flow"
+msgstr ""
+
+msgid ""
+"This value governs the thickness of the internal bridge layer. This is the "
+"first layer over sparse infill. Decrease this value slightly (for example "
+"0.9) to improve surface quality over sparse infill."
+msgstr ""
+
 msgid "Top surface flow ratio"
 msgstr "Коэффициент потока на верхней поверхности"
 
@@ -8196,6 +8191,15 @@ msgstr ""
 "отключено, мосты выглядят лучше, но они надежны только на коротких "
 "расстояниях."
 
+msgid "Thick internal bridges"
+msgstr ""
+
+msgid ""
+"If enabled, thick internal bridges will be used. It's usually recommended to "
+"have this feature turned on. However, consider turning it off if you are "
+"using large nozzles."
+msgstr ""
+
 msgid "Max bridge length"
 msgstr "Максимальная длина моста"
 
@@ -8217,6 +8221,16 @@ msgstr "Завершающий G-код при окончании всей пе
 msgid "End G-code when finish the printing of this filament"
 msgstr "Завершающий G-код при окончании печати этой пластиковой нитью."
 
+msgid "Ensure vertical shell thickness"
+msgstr "Обеспечивать верт. толщину оболочки"
+
+msgid ""
+"Add solid infill near sloping surfaces to guarantee the vertical shell "
+"thickness (top+bottom solid layers)"
+msgstr ""
+"Добавление сплошного заполнения вблизи наклонных поверхностей для "
+"обеспечения вертикальной толщины оболочки (верхний+нижний сплошные слои)."
+
 msgid "Top surface pattern"
 msgstr "Шаблон заполнения верхней поверхности"
 
@@ -8870,17 +8884,17 @@ msgstr "Вкл. ограничение ускорения зигзагов"
 msgid "Klipper's max_accel_to_decel will be adjusted automatically"
 msgstr ""
 "Значение Klipper-а max_accel_to_decel (ограничение ускорения зигзагов) будет "
-"скорректировано автоматически"
+"скорректировано автоматически."
 
 msgid "accel_to_decel"
-msgstr "ограничение ускорение зигзагов"
+msgstr "Ограничение ускорение зигзагов"
 
 #, c-format, boost-format
 msgid ""
 "Klipper's max_accel_to_decel will be adjusted to this %% of acceleration"
 msgstr ""
 "Значение Klipper-а max_accel_to_decel (ограничение ускорения зигзагов) будет "
-"скорректировано на данное ускорение: %%\""
+"скорректировано на заданный процент ускорения."
 
 #, c-format, boost-format
 msgid "%%"
@@ -9061,7 +9075,7 @@ msgstr ""
 "(Nx)."
 
 msgid "Scan first layer"
-msgstr "Сканировать первый слой"
+msgstr "Проверка первого слоя"
 
 msgid ""
 "Enable this to enable the camera on printer to check the quality of first "
@@ -9969,13 +9983,13 @@ msgid "All Surfaces"
 msgstr "Все верхние поверхности"
 
 msgid "Top Only"
-msgstr "Только на верней"
+msgstr "Только на верхней"
 
 msgid "Bottom Only"
 msgstr "Только на нижней"
 
 msgid "Top and Bottom"
-msgstr "На верней и нижней"
+msgstr "На верхней и нижней"
 
 msgid "Extra length on restart"
 msgstr "Доп. длина подачи перед возобновлением печати"
@@ -10013,14 +10027,15 @@ msgstr ""
 "использоваться та же скорость что и при извлечении."
 
 msgid "Use firmware retraction"
-msgstr "Использовать откат из прошивки"
+msgstr "Исп. откат из прошивки"
 
 msgid ""
 "This experimental setting uses G10 and G11 commands to have the firmware "
 "handle the retraction. This is only supported in recent Marlin."
 msgstr ""
-"Эта экспериментальная опция использует команды G10 и G11, чтобы прошивка "
-"обрабатывала откаты. Поддерживается только в последних версиях Marlin."
+"Эта экспериментальная опция использует команды G10 и G11, чтобы сама "
+"прошивка обрабатывала откаты. Поддерживается только в последних версиях "
+"Marlin."
 
 msgid "Show auto-calibration marks"
 msgstr "Отображать на столе линии автокалибровки"
@@ -10165,9 +10180,9 @@ msgid ""
 "generated model has no seam"
 msgstr ""
 "Печать спиральных и пустотелых, а также тонкостенных моделей. Модель "
-"печатается в одну стенку без верней поверхности, заполнения и поддержки. При "
-"этом сопло движется вдоль периметра непрерывно постепенно поднимаясь, так "
-"получаются ровные красивые вазы без видимых швов."
+"печатается в одну стенку без верхней поверхности, заполнения и поддержки. "
+"При этом сопло движется вдоль периметра непрерывно постепенно поднимаясь, "
+"так получаются ровные красивые вазы без видимых швов."
 
 msgid ""
 "If smooth or traditional mode is selected, a timelapse video will be "
@@ -10396,7 +10411,7 @@ msgid ""
 "Filament to print support base and raft. \"Default\" means no specific "
 "filament for support and current filament is used"
 msgstr ""
-"Пластиковая нить для печати базовой поддержки и плота. Значение «По "
+"Пластиковая нить для печати базовой поддержки и подложки. Значение «По "
 "умолчанию» означает, что для поддержки используется текущая пластиковая нить."
 
 msgid ""
@@ -10747,6 +10762,10 @@ msgstr ""
 "Этот G-код вставляется при смене материала, включая команду T для запуска "
 "смены инструмента."
 
+# ???
+msgid "This gcode is inserted when the extrusion role is changed"
+msgstr "Этот G-код вставляется при смене роли экструзии."
+
 msgid ""
 "Line width for top surfaces. If expressed as a %, it will be computed over "
 "the nozzle diameter."
@@ -11020,7 +11039,7 @@ msgstr ""
 "размера, QOI для прошивки с малым объемом памяти."
 
 msgid "Use relative E distances"
-msgstr "Исп. относительные координаты для экструдера (E)"
+msgstr "Исп. относительные координаты для экструдера"
 
 msgid ""
 "Relative extrusion is recommended when using \"label_objects\" option.Some "
@@ -11031,7 +11050,7 @@ msgstr ""
 "Относительная экструзия рекомендуется при использовании опции «Название "
 "моделей».\n"
 "\n"
-"Черновая башня совместима только с относительной экструзии. На принтерах "
+"Черновая башня совместима только с относительной экструзией. На принтерах "
 "BambuLab она всегда включена (флажок стоит).\n"
 "Некоторые экструдеры работают лучше при отключении этой опции (абсолютный "
 "режим экструзии)."
@@ -11155,6 +11174,19 @@ msgstr ""
 "элемента. Если задано в процентах, то значение вычисляться относительно "
 "диаметра сопла."
 
+msgid "Detect narrow internal solid infill"
+msgstr "Обнаруживать узкую область сплошного заполнения"
+
+msgid ""
+"This option will auto detect narrow internal solid infill area. If enabled, "
+"concentric pattern will be used for the area to speed printing up. "
+"Otherwise, rectilinear pattern is used defaultly."
+msgstr ""
+"Этот параметр автоматически определяет узкую внутреннюю область сплошного "
+"заполнения. Если включено, для ускорения печати будет использоваться "
+"концентрический шаблон. В противном случае по умолчанию используется "
+"прямолинейный шаблон."
+
 msgid "invalid value "
 msgstr "недопустимое значение "
 
@@ -12110,9 +12142,7 @@ msgid "Upload to Printer Host with the following filename:"
 msgstr "Загрузить на хост принтера со следующим именем:"
 
 msgid "Use forward slashes ( / ) as a directory separator if needed."
-msgstr ""
-"При необходимости используйте косую черту ( / ) в качестве разделителя "
-"каталогов."
+msgstr "В качестве разделителя каталогов используйте косую черту ( / ).  "
 
 msgid "Upload to storage"
 msgstr "Загрузить в хранилище"
@@ -12348,8 +12378,7 @@ msgstr ""
 "его в хранилище сертификатов/Keychain."
 
 msgid "Connection to printers connected via the print host failed."
-msgstr ""
-"Не удалось подключиться к принтерам, подключенным через через хост печати."
+msgstr "Не удалось подключиться к принтерам, подключенным через хост печати."
 
 msgid "The start, end or step is not valid value."
 msgstr "Недопустимое значение: начальное, конечное или шаг."
@@ -12544,7 +12573,7 @@ msgid ""
 "Did you know that you can print a model even faster, by using the Adaptive "
 "Layer Height option? Check it out!"
 msgstr ""
-"Ускорение печати с помощью функции «Переменная высота слоёв»\n"
+"Ускорение печати с функцией «Переменная высота слоёв»\n"
 "Знаете ли вы, что можно печатать ещё быстрее, используя функцию «Переменная "
 "высота слоёв». Попробуйте!"
 
@@ -12647,6 +12676,9 @@ msgstr ""
 "камере, открытие дверцы принтера снижает вероятность засорения экструдера/"
 "хотэнда. Более подробную информацию читайте на вики-сайте."
 
+#~ msgid "Embeded"
+#~ msgstr "Проникновение"
+
 #~ msgid "AMS %s"
 #~ msgstr "АСПП №%s"
 
@@ -12707,10 +12739,10 @@ msgstr ""
 #~ "(Currently supporting automatic supply of consumables with the same "
 #~ "brand, material type, and color)"
 #~ msgstr ""
-#~ "В настоящее время идентичные резервные материалы отсутствуют, и "
-#~ "автоматическое пополнение их в настоящее время невозможно. \n"
-#~ "(В настоящее время поддерживается автоматическая поставка расходных "
-#~ "материалов того же производителя, типа материала и цвета)."
+#~ "В настоящее время одинаковые материалы отсутствуют, поэтому функция "
+#~ "резервирования материала (автодозаправка) недоступна. \n"
+#~ "(В настоящее время поддерживается автоматическая дозаправка материала "
+#~ "только одного производителя, типа и цвета)"
 
 #, c-format, boost-format
 #~ msgid ""
@@ -12826,6 +12858,27 @@ msgstr ""
 #~ "Этот 3mf создан не в Bambu Lab, поэтому загрузятся только данные "
 #~ "геометрии."
 
+#~ msgid ""
+#~ "The 3mf's version %s is newer than %s's version %s, Found following keys "
+#~ "unrecognized:"
+#~ msgstr ""
+#~ "Версия этого формата 3mf (%s) новее текущей версии %s (%s). \n"
+#~ "Обнаружены следующие нераспознанные ключи:"
+
+#~ msgid "You'd better upgrade your software.\n"
+#~ msgstr "Рекомендуем вам обновить программу.\n"
+
+#~ msgid "Newer 3mf version"
+#~ msgstr "Новая версия 3mf"
+
+#, c-format, boost-format
+#~ msgid ""
+#~ "The 3mf's version %s is newer than %s's version %s, Suggest to upgrade "
+#~ "your software."
+#~ msgstr ""
+#~ "Версия этого формата 3mf (%s) новее текущей версии %s (%s). \n"
+#~ "Рекомендуется обновить программу."
+
 #~ msgid "Online Models"
 #~ msgstr "Онлайн-модели"
 
@@ -12838,12 +12891,6 @@ msgstr ""
 #~ "Истекло время ожидания отправки задания. Проверьте сетевое подключение и "
 #~ "повторите попытку."
 
-#~ msgid "Bamabu Engineering Plate"
-#~ msgstr "Инженерная пластина Bamabu"
-
-#~ msgid "Bamabu High Temperature Plate"
-#~ msgstr "Высокотемпературная пластина Bamabu"
-
 #~ msgid "Can't connect to the printer"
 #~ msgstr "Не удаётся подключиться к принтеру"
 
@@ -12883,13 +12930,6 @@ msgstr ""
 #~ "Шаг 1. Пожалуйста, убедитесь, что Bambu Studio и ваш принтер находятся в "
 #~ "одной локальной сети."
 
-#~ msgid ""
-#~ "Add solid infill near sloping surfaces to guarantee the vertical shell "
-#~ "thickness (top+bottom solid layers)"
-#~ msgstr ""
-#~ "Добавление сплошного заполнения вблизи наклонных поверхностей для "
-#~ "обеспечения вертикальной толщины оболочки (верхний+нижний сплошные слои)."
-
 #~ msgid "Internal bridge support thickness"
 #~ msgstr "Толщина поддержки внутреннего моста"
 
@@ -12927,7 +12967,7 @@ msgstr ""
 #~ "Klipper's max_accel_to_decel will be adjusted to this % of acceleration"
 #~ msgstr ""
 #~ "Значение Klipper-а max_accel_to_decel (ограничение ускорения зигзагов) "
-#~ "будет скорректировано на данное ускорение: %"
+#~ "будет скорректировано на заданный процент ускорения."
 
 #~ msgid ""
 #~ "Filter out gaps smaller than the threshold specified. This setting won't "
@@ -12992,19 +13032,6 @@ msgstr ""
 #~ "низкая температура последующих слоёв может привести к отрыву модели от "
 #~ "стола."
 
-#~ msgid "Detect narrow internal solid infill"
-#~ msgstr "Обнаруживать узкую область сплошного заполнения"
-
-#~ msgid ""
-#~ "This option will auto detect narrow internal solid infill area. If "
-#~ "enabled, concentric pattern will be used for the area to speed printing "
-#~ "up. Otherwise, rectilinear pattern is used defaultly."
-#~ msgstr ""
-#~ "Этот параметр автоматически определяет узкую внутреннюю область сплошного "
-#~ "заполнения. Если включено, для ускорения печати будет использоваться "
-#~ "концентрический шаблон. В противном случае по умолчанию используется "
-#~ "прямолинейный шаблон."
-
 #~ msgid "Orient the model"
 #~ msgstr "Ориентация модели"
 
@@ -13256,7 +13283,6 @@ msgstr ""
 #~ "количество точек, в которых древовидная поддержка касается модели. Это "
 #~ "улучшит печать нависаний, но при этом усложнит удаление поддержки."
 
-# Нижняя граница сработки???
 #~ msgid "Z hop lower boundary"
 #~ msgstr "Приподнимать ось Z только ниже"
 
@@ -13268,7 +13294,6 @@ msgstr ""
 #~ "(до) заданной здесь высоты (высота считается от стола). Таким образом вы "
 #~ "можете запретить подъём оси Z выше установленной высоты."
 
-# Верхняя граница сработки???
 #~ msgid "Z hop upper boundary"
 #~ msgstr "Приподнимать ось Z только выше"
 
@@ -13280,3 +13305,9 @@ msgstr ""
 #~ "(после) заданной здесь высоты (высота считается от стола). Таким образом "
 #~ "вы можете отключить подъём оси Z при печати на первых слоях (в начале "
 #~ "печати)."
+
+#~ msgid "invalid value"
+#~ msgstr "недопустимое значение"
+
+#~ msgid "MB uploaded"
+#~ msgstr "МБ загружено"

localization/i18n/sv/OrcaSlicer_sv.po

@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-11-04 14:18+0800\n"
+"POT-Creation-Date: 2023-12-02 01:44+0800\n"
 "Language: sv\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -489,27 +489,12 @@ msgstr "Målning av sömmar"
 msgid "Remove selection"
 msgstr "Ta bort val"
 
-msgid "Shift + Mouse move up or dowm"
-msgstr "Shift + Mus flytta uppåt eller nedåt"
-
-msgid "Rotate text"
-msgstr "Rotera text"
-
-msgid "Text shape"
-msgstr "Text form"
-
 msgid "Font"
 msgstr "Typsnitt"
 
 msgid "Thickness"
 msgstr "Tjocklek"
 
-msgid "Input text"
-msgstr "Skriv in text"
-
-msgid "Embeded"
-msgstr "Inbäddad"
-
 msgid "Text Gap"
 msgstr "Text mellanrum"
 
@@ -521,12 +506,24 @@ msgid ""
 "depth"
 msgstr "Inbäddat djup"
 
+msgid "Input text"
+msgstr "Skriv in text"
+
 msgid "Surface"
 msgstr "Yta"
 
 msgid "Horizontal text"
 msgstr "Vågrät text"
 
+msgid "Shift + Mouse move up or dowm"
+msgstr "Shift + Mus flytta uppåt eller nedåt"
+
+msgid "Rotate text"
+msgstr "Rotera text"
+
+msgid "Text shape"
+msgstr "Text form"
+
 msgid "Ctrl+"
 msgstr "Ctrl +"
 
@@ -609,11 +606,6 @@ msgstr ""
 msgid "WebView2 Runtime"
 msgstr ""
 
-msgid ""
-"OrcaSlicer configuration file may be corrupted and is not abled to be parsed."
-"Please delete the file and try again."
-msgstr ""
-
 #, c-format, boost-format
 msgid ""
 "%s\n"
@@ -641,6 +633,13 @@ msgstr "Det är den senaste versionen."
 msgid "Info"
 msgstr "Info"
 
+msgid ""
+"The OrcaSlicer configuration file may be corrupted and cannot be parsed.\n"
+"OrcaSlicer has attempted to recreate the configuration file.\n"
+"Please note, application settings will be lost, but printer profiles will "
+"not be affected."
+msgstr ""
+
 msgid "Rebuild"
 msgstr "Återskapa"
 
@@ -4532,28 +4531,6 @@ msgstr "Konfigurationen kan inte laddas."
 msgid "The 3mf is generated by old Orca Slicer, load geometry data only."
 msgstr ""
 
-#, c-format, boost-format
-msgid ""
-"The 3mf's version %s is newer than %s's version %s, Found following keys "
-"unrecognized:"
-msgstr ""
-"3mf:s version %s är nyare än %s version %s, Följande nycklar har hittats som "
-"inte känns igen:"
-
-msgid "You'd better upgrade your software.\n"
-msgstr "Uppdatera mjukvaran.\n"
-
-msgid "Newer 3mf version"
-msgstr "Nyare 3mf version"
-
-#, c-format, boost-format
-msgid ""
-"The 3mf's version %s is newer than %s's version %s, Suggest to upgrade your "
-"software."
-msgstr ""
-"3mf:s version %s är nyare än %s version %s, Föreslår att du uppdaterar din "
-"programvara."
-
 msgid "Invalid values found in the 3mf:"
 msgstr "Ogiltiga värden hittades i 3mf:"
 
@@ -6110,6 +6087,9 @@ msgstr ""
 msgid "Change filament G-code"
 msgstr "Byta filament G-kod"
 
+msgid "Change extrusion role G-code"
+msgstr ""
+
 msgid "Pause G-code"
 msgstr "Paus G-kod"
 
@@ -7582,6 +7562,15 @@ msgstr ""
 "Minska detta värde något (tex 0.9) för att minska material åtgång för "
 "bridges/bryggor, detta för att förbättra kvaliteten"
 
+msgid "Internal bridge flow"
+msgstr ""
+
+msgid ""
+"This value governs the thickness of the internal bridge layer. This is the "
+"first layer over sparse infill. Decrease this value slightly (for example "
+"0.9) to improve surface quality over sparse infill."
+msgstr ""
+
 msgid "Top surface flow ratio"
 msgstr ""
 
@@ -7874,6 +7863,15 @@ msgstr ""
 "sträckor men kan se sämre ut. Om de är inaktiverade ser bridges bättre ut "
 "men är tillförlitliga endast för kortare avstånd."
 
+msgid "Thick internal bridges"
+msgstr ""
+
+msgid ""
+"If enabled, thick internal bridges will be used. It's usually recommended to "
+"have this feature turned on. However, consider turning it off if you are "
+"using large nozzles."
+msgstr ""
+
 msgid "Max bridge length"
 msgstr "Max bridge/brygg längd"
 
@@ -7895,6 +7893,16 @@ msgstr "Lägg till slut G-kod när utskriften har avslutas"
 msgid "End G-code when finish the printing of this filament"
 msgstr "Lägg till slut G-kod när utskriften har avslutas med detta filament"
 
+msgid "Ensure vertical shell thickness"
+msgstr "Säkerställ vertikal skaltjocklek"
+
+msgid ""
+"Add solid infill near sloping surfaces to guarantee the vertical shell "
+"thickness (top+bottom solid layers)"
+msgstr ""
+"Lägg till massiv fyllning nära sluttande ytor för att garantera den "
+"vertikala skal tjockleken (topp+bottenfasta lager)."
+
 msgid "Top surface pattern"
 msgstr "Topp ytans mönster"
 
@@ -10087,6 +10095,9 @@ msgstr ""
 "G-koden sätts in vid filament byte, inklusive T kommando som aktiverar "
 "verktygs byte"
 
+msgid "This gcode is inserted when the extrusion role is changed"
+msgstr ""
+
 msgid ""
 "Line width for top surfaces. If expressed as a %, it will be computed over "
 "the nozzle diameter."
@@ -10447,6 +10458,19 @@ msgstr ""
 "elementet blir väggen lika tjock som själva elementet. Den uttrycks i "
 "procent av nozzel diametern."
 
+msgid "Detect narrow internal solid infill"
+msgstr "Upptäck tight inre solid ifyllnad"
+
+msgid ""
+"This option will auto detect narrow internal solid infill area. If enabled, "
+"concentric pattern will be used for the area to speed printing up. "
+"Otherwise, rectilinear pattern is used defaultly."
+msgstr ""
+"Detta val kommer att auto upptäcka tight inre solid ifyllnads område. Om "
+"aktiverat kommer det koncentriska mönstret att användas för området för att "
+"påskynda utskriften. Annars kommer mönstret med räta linjer att användas som "
+"standard."
+
 msgid "invalid value "
 msgstr "ogiltigt värde "
 
@@ -11781,6 +11805,31 @@ msgid ""
 "temperature. More info about this in the Wiki."
 msgstr ""
 
+#, c-format, boost-format
+#~ msgid ""
+#~ "The 3mf's version %s is newer than %s's version %s, Found following keys "
+#~ "unrecognized:"
+#~ msgstr ""
+#~ "3mf:s version %s är nyare än %s version %s, Följande nycklar har hittats "
+#~ "som inte känns igen:"
+
+#~ msgid "You'd better upgrade your software.\n"
+#~ msgstr "Uppdatera mjukvaran.\n"
+
+#~ msgid "Newer 3mf version"
+#~ msgstr "Nyare 3mf version"
+
+#, c-format, boost-format
+#~ msgid ""
+#~ "The 3mf's version %s is newer than %s's version %s, Suggest to upgrade "
+#~ "your software."
+#~ msgstr ""
+#~ "3mf:s version %s är nyare än %s version %s, Föreslår att du uppdaterar "
+#~ "din programvara."
+
+#~ msgid "Embeded"
+#~ msgstr "Inbäddad"
+
 #~ msgid "Online Models"
 #~ msgstr "Online modeller"
 
@@ -11798,16 +11847,6 @@ msgstr ""
 #~ "Öppna skrivarens främre dörr innan du skriver ut för att undvika att "
 #~ "nozzeln täpps till."
 
-#~ msgid "Ensure vertical shell thickness"
-#~ msgstr "Säkerställ vertikal skaltjocklek"
-
-#~ msgid ""
-#~ "Add solid infill near sloping surfaces to guarantee the vertical shell "
-#~ "thickness (top+bottom solid layers)"
-#~ msgstr ""
-#~ "Lägg till massiv fyllning nära sluttande ytor för att garantera den "
-#~ "vertikala skal tjockleken (topp+bottenfasta lager)."
-
 #~ msgid "Temperature of vitrificaiton"
 #~ msgstr "Kristalliserings temperatur"
 
@@ -11830,19 +11869,6 @@ msgstr ""
 #~ "denna hastighet under utskrift förutom de lager som definieras som inga "
 #~ "kyl lager"
 
-#~ msgid "Detect narrow internal solid infill"
-#~ msgstr "Upptäck tight inre solid ifyllnad"
-
-#~ msgid ""
-#~ "This option will auto detect narrow internal solid infill area. If "
-#~ "enabled, concentric pattern will be used for the area to speed printing "
-#~ "up. Otherwise, rectilinear pattern is used defaultly."
-#~ msgstr ""
-#~ "Detta val kommer att auto upptäcka tight inre solid ifyllnads område. Om "
-#~ "aktiverat kommer det koncentriska mönstret att användas för området för "
-#~ "att påskynda utskriften. Annars kommer mönstret med räta linjer att "
-#~ "användas som standard."
-
 #~ msgid "Empty layers around bottom are replaced by nearest normal layers."
 #~ msgstr "Tomma lager runt botten ersätts med närmast normala lager."
 

localization/i18n/uk/OrcaSlicer_uk.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-11-04 14:18+0800\n"
+"POT-Creation-Date: 2023-12-02 01:44+0800\n"
 "PO-Revision-Date: 2023-08-10 20:25-0400\n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -495,27 +495,12 @@ msgstr "Малювання шва"
 msgid "Remove selection"
 msgstr "Видалити виділення"
 
-msgid "Shift + Mouse move up or dowm"
-msgstr "Shift + переміщення миші вгору або вниз"
-
-msgid "Rotate text"
-msgstr "Повернути текст"
-
-msgid "Text shape"
-msgstr "Форма тексту"
-
 msgid "Font"
 msgstr "Шрифт"
 
 msgid "Thickness"
 msgstr "Товщина"
 
-msgid "Input text"
-msgstr "Введення тексту"
-
-msgid "Embeded"
-msgstr "Вбудовано"
-
 msgid "Text Gap"
 msgstr "Пробіл у тексті"
 
@@ -527,12 +512,24 @@ msgid ""
 "depth"
 msgstr "Вбудована глибина"
 
+msgid "Input text"
+msgstr "Введення тексту"
+
 msgid "Surface"
 msgstr "Поверхня"
 
 msgid "Horizontal text"
 msgstr "Горизонтальний текст"
 
+msgid "Shift + Mouse move up or dowm"
+msgstr "Shift + переміщення миші вгору або вниз"
+
+msgid "Rotate text"
+msgstr "Повернути текст"
+
+msgid "Text shape"
+msgstr "Форма тексту"
+
 msgid "Ctrl+"
 msgstr "Ctrl+"
 
@@ -621,13 +618,6 @@ msgstr ""
 msgid "WebView2 Runtime"
 msgstr ""
 
-msgid ""
-"OrcaSlicer configuration file may be corrupted and is not abled to be parsed."
-"Please delete the file and try again."
-msgstr ""
-"Файл конфігурації OrcaSlicer може бути пошкоджений і не підлягає розбору. "
-"Видаліть файл і спробуйте ще раз."
-
 #, c-format, boost-format
 msgid ""
 "%s\n"
@@ -653,6 +643,13 @@ msgstr "Це найновіша версія."
 msgid "Info"
 msgstr "Інформація"
 
+msgid ""
+"The OrcaSlicer configuration file may be corrupted and cannot be parsed.\n"
+"OrcaSlicer has attempted to recreate the configuration file.\n"
+"Please note, application settings will be lost, but printer profiles will "
+"not be affected."
+msgstr ""
+
 msgid "Rebuild"
 msgstr "Відновити"
 
@@ -4589,26 +4586,6 @@ msgid "The 3mf is generated by old Orca Slicer, load geometry data only."
 msgstr ""
 "3mf генерується старим слайсером Orca, завантажувати лише дані геометрії."
 
-#, c-format, boost-format
-msgid ""
-"The 3mf's version %s is newer than %s's version %s, Found following keys "
-"unrecognized:"
-msgstr "Версія 3mf %s новіша, ніж версія %s %s, знайдено наступні ключі:"
-
-msgid "You'd better upgrade your software.\n"
-msgstr "Вам краще оновити програмне забезпечення.\n"
-
-msgid "Newer 3mf version"
-msgstr "Нова версія 3mf"
-
-#, c-format, boost-format
-msgid ""
-"The 3mf's version %s is newer than %s's version %s, Suggest to upgrade your "
-"software."
-msgstr ""
-"Версія 3mf %s новіша, ніж версія %s %s, запропонуйте оновити програмне "
-"забезпечення."
-
 msgid "Invalid values found in the 3mf:"
 msgstr "У 3mf знайдено неприпустимі значення:"
 
@@ -6153,6 +6130,9 @@ msgstr ""
 msgid "Change filament G-code"
 msgstr "G-code Зміни філаменту"
 
+msgid "Change extrusion role G-code"
+msgstr ""
+
 msgid "Pause G-code"
 msgstr "G-code Паузи"
 
@@ -7642,6 +7622,15 @@ msgstr ""
 "Трохи зменшіть це значення (наприклад, 0.9), щоб зменшити кількість "
 "матеріалу для мосту, щоб покращити провисання"
 
+msgid "Internal bridge flow"
+msgstr ""
+
+msgid ""
+"This value governs the thickness of the internal bridge layer. This is the "
+"first layer over sparse infill. Decrease this value slightly (for example "
+"0.9) to improve surface quality over sparse infill."
+msgstr ""
+
 msgid "Top surface flow ratio"
 msgstr "Коефіцієнт потоку верхньої поверхні"
 
@@ -7943,6 +7932,15 @@ msgstr ""
 "великівідстань, але можуть виглядати гірше. Якщо відключити, мости "
 "виглядають краще,Але надійні лише для більш коротких мостових відстаней."
 
+msgid "Thick internal bridges"
+msgstr ""
+
+msgid ""
+"If enabled, thick internal bridges will be used. It's usually recommended to "
+"have this feature turned on. However, consider turning it off if you are "
+"using large nozzles."
+msgstr ""
+
 msgid "Max bridge length"
 msgstr "Максимальна довжина мосту"
 
@@ -7964,6 +7962,16 @@ msgstr "Завершальний G-code, коли закінчити весь д
 msgid "End G-code when finish the printing of this filament"
 msgstr "Завершальний G-code, коли закінчите друк цієї нитки"
 
+msgid "Ensure vertical shell thickness"
+msgstr "Забезпечення вертикальної товщини оболонки"
+
+msgid ""
+"Add solid infill near sloping surfaces to guarantee the vertical shell "
+"thickness (top+bottom solid layers)"
+msgstr ""
+"Додавання заповнення твердого тіла поблизу похилих поверхонь для Гарантії "
+"товщини вертикальної оболонки (верхній + нижній шари твердого тіла)"
+
 msgid "Top surface pattern"
 msgstr "Малюнок верхньої поверхні"
 
@@ -10269,6 +10277,9 @@ msgstr ""
 "Цей gcode вставляється при зміні філаменту, включаючи команду T для запуску "
 "зміни інструменту"
 
+msgid "This gcode is inserted when the extrusion role is changed"
+msgstr ""
+
 msgid ""
 "Line width for top surfaces. If expressed as a %, it will be computed over "
 "the nozzle diameter."
@@ -10621,6 +10632,19 @@ msgstr ""
 "елемента, то товщина периметра дорівнюватиме товщині самого елемента. Він "
 "виражається у відсотках від діаметра сопла"
 
+msgid "Detect narrow internal solid infill"
+msgstr "Виявлення вузького внутрішнього заповнення твердим тілом"
+
+msgid ""
+"This option will auto detect narrow internal solid infill area. If enabled, "
+"concentric pattern will be used for the area to speed printing up. "
+"Otherwise, rectilinear pattern is used defaultly."
+msgstr ""
+"Ця опція автоматично визначає вузьку внутрішню область заповненнятвердого "
+"тіла. Якщо цей параметр увімкнено, для прискорення друку області "
+"використовуватиметься концентричний візерунок. Інакше за умовчанням "
+"Використовується прямолінійний малюнок."
+
 msgid "invalid value "
 msgstr "неправильне значення "
 
@@ -11970,6 +11994,36 @@ msgid ""
 "temperature. More info about this in the Wiki."
 msgstr ""
 
+#, c-format, boost-format
+#~ msgid ""
+#~ "The 3mf's version %s is newer than %s's version %s, Found following keys "
+#~ "unrecognized:"
+#~ msgstr "Версія 3mf %s новіша, ніж версія %s %s, знайдено наступні ключі:"
+
+#~ msgid "You'd better upgrade your software.\n"
+#~ msgstr "Вам краще оновити програмне забезпечення.\n"
+
+#~ msgid "Newer 3mf version"
+#~ msgstr "Нова версія 3mf"
+
+#, c-format, boost-format
+#~ msgid ""
+#~ "The 3mf's version %s is newer than %s's version %s, Suggest to upgrade "
+#~ "your software."
+#~ msgstr ""
+#~ "Версія 3mf %s новіша, ніж версія %s %s, запропонуйте оновити програмне "
+#~ "забезпечення."
+
+#~ msgid "Embeded"
+#~ msgstr "Вбудовано"
+
+#~ msgid ""
+#~ "OrcaSlicer configuration file may be corrupted and is not abled to be "
+#~ "parsed.Please delete the file and try again."
+#~ msgstr ""
+#~ "Файл конфігурації OrcaSlicer може бути пошкоджений і не підлягає розбору. "
+#~ "Видаліть файл і спробуйте ще раз."
+
 #~ msgid "The minimum printing speed when slow down for cooling"
 #~ msgstr "Мінімальна швидкість друку при уповільненні для охолодження"
 
@@ -11981,16 +12035,6 @@ msgstr ""
 #~ "відчиняйте передні дверцята принтера перед печаткою, щоб уникнути "
 #~ "засмічення сопла."
 
-#~ msgid "Ensure vertical shell thickness"
-#~ msgstr "Забезпечення вертикальної товщини оболонки"
-
-#~ msgid ""
-#~ "Add solid infill near sloping surfaces to guarantee the vertical shell "
-#~ "thickness (top+bottom solid layers)"
-#~ msgstr ""
-#~ "Додавання заповнення твердого тіла поблизу похилих поверхонь для Гарантії "
-#~ "товщини вертикальної оболонки (верхній + нижній шари твердого тіла)"
-
 #~ msgid "Temperature of vitrificaiton"
 #~ msgstr "Температура склування"
 
@@ -12015,19 +12059,6 @@ msgstr ""
 #~ "ДопоміжнийВентилятор буде працювати з такою швидкістю під час друку, за "
 #~ "винятком перших кількох шарів, які не визначаються шарами охолодження"
 
-#~ msgid "Detect narrow internal solid infill"
-#~ msgstr "Виявлення вузького внутрішнього заповнення твердим тілом"
-
-#~ msgid ""
-#~ "This option will auto detect narrow internal solid infill area. If "
-#~ "enabled, concentric pattern will be used for the area to speed printing "
-#~ "up. Otherwise, rectilinear pattern is used defaultly."
-#~ msgstr ""
-#~ "Ця опція автоматично визначає вузьку внутрішню область заповненнятвердого "
-#~ "тіла. Якщо цей параметр увімкнено, для прискорення друку області "
-#~ "використовуватиметься концентричний візерунок. Інакше за умовчанням "
-#~ "Використовується прямолінійний малюнок."
-
 #~ msgid "Empty layers around bottom are replaced by nearest normal layers."
 #~ msgstr ""
 #~ "Порожні шари навколо дна замінюються найближчими нормальними шарами."

localization/i18n/zh_CN/OrcaSlicer_zh_CN.po

@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Slic3rPE\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-11-04 14:18+0800\n"
+"POT-Creation-Date: 2023-12-02 01:44+0800\n"
 "PO-Revision-Date: 2023-04-01 13:21+0800\n"
 "Last-Translator: SoftFever <softfeverever@gmail.com>\n"
 "Language-Team: \n"
@@ -491,27 +491,12 @@ msgstr "Z缝绘制"
 msgid "Remove selection"
 msgstr "移除绘制"
 
-msgid "Shift + Mouse move up or dowm"
-msgstr "Shift + 鼠标上移或下移"
-
-msgid "Rotate text"
-msgstr "旋转文字"
-
-msgid "Text shape"
-msgstr "文本形状"
-
 msgid "Font"
 msgstr "字体"
 
 msgid "Thickness"
 msgstr "厚度"
 
-msgid "Input text"
-msgstr "输入文本"
-
-msgid "Embeded"
-msgstr "嵌入的"
-
 msgid "Text Gap"
 msgstr "文字间距"
 
@@ -523,12 +508,24 @@ msgid ""
 "depth"
 msgstr "内嵌深度"
 
+msgid "Input text"
+msgstr "输入文本"
+
 msgid "Surface"
 msgstr "附着曲面"
 
 msgid "Horizontal text"
 msgstr "水平文字"
 
+msgid "Shift + Mouse move up or dowm"
+msgstr "Shift + 鼠标上移或下移"
+
+msgid "Rotate text"
+msgstr "旋转文字"
+
+msgid "Text shape"
+msgstr "文本形状"
+
 msgid "Ctrl+"
 msgstr ""
 
@@ -614,12 +611,6 @@ msgstr ""
 msgid "WebView2 Runtime"
 msgstr "WebView2 运行库"
 
-msgid ""
-"OrcaSlicer configuration file may be corrupted and is not abled to be parsed."
-"Please delete the file and try again."
-msgstr ""
-"OrcaSlicer 配置文件可能已损坏而无法解析。请删除此文件并重新启动OrcaSlicer。"
-
 #, c-format, boost-format
 msgid ""
 "%s\n"
@@ -645,6 +636,13 @@ msgstr "已经是最新版本。"
 msgid "Info"
 msgstr "信息"
 
+msgid ""
+"The OrcaSlicer configuration file may be corrupted and cannot be parsed.\n"
+"OrcaSlicer has attempted to recreate the configuration file.\n"
+"Please note, application settings will be lost, but printer profiles will "
+"not be affected."
+msgstr ""
+
 msgid "Rebuild"
 msgstr "重新构建"
 
@@ -4427,24 +4425,6 @@ msgstr "配置无法加载。"
 msgid "The 3mf is generated by old Orca Slicer, load geometry data only."
 msgstr "该3mf文件来自旧版本的逆戟鲸切片，将只加载几何数据。"
 
-#, c-format, boost-format
-msgid ""
-"The 3mf's version %s is newer than %s's version %s, Found following keys "
-"unrecognized:"
-msgstr "该3mf的版本%s比%s的版本%s新，发现以下参数键值无法识别:"
-
-msgid "You'd better upgrade your software.\n"
-msgstr "建议升级您的软件版本。\n"
-
-msgid "Newer 3mf version"
-msgstr "较新的3mf版本"
-
-#, c-format, boost-format
-msgid ""
-"The 3mf's version %s is newer than %s's version %s, Suggest to upgrade your "
-"software."
-msgstr "该3mf的版本%s比%s的版本%s要新，建议升级你的软件。"
-
 msgid "Invalid values found in the 3mf:"
 msgstr "在3mf文件中发现无效值："
 
@@ -5925,6 +5905,9 @@ msgstr "延时摄影G-code"
 msgid "Change filament G-code"
 msgstr "耗材丝更换G-code"
 
+msgid "Change extrusion role G-code"
+msgstr ""
+
 msgid "Pause G-code"
 msgstr "暂停 G-code"
 
@@ -7322,6 +7305,15 @@ msgid ""
 "material for bridge, to improve sag"
 msgstr "稍微减小这个数值（比如0.9）可以减小桥接的材料量，来改善下垂。"
 
+msgid "Internal bridge flow"
+msgstr "内部桥接流量"
+
+msgid ""
+"This value governs the thickness of the internal bridge layer. This is the "
+"first layer over sparse infill. Decrease this value slightly (for example "
+"0.9) to improve surface quality over sparse infill."
+msgstr ""
+
 msgid "Top surface flow ratio"
 msgstr "顶部表面流量比例"
 
@@ -7616,6 +7608,15 @@ msgstr ""
 "如果启用，桥接会更可靠，可以桥接更长的距离，但可能看起来更糟。如果关闭，桥梁"
 "看起来更好，但只适用于较短的桥接距离。"
 
+msgid "Thick internal bridges"
+msgstr "厚内部桥"
+
+msgid ""
+"If enabled, thick internal bridges will be used. It's usually recommended to "
+"have this feature turned on. However, consider turning it off if you are "
+"using large nozzles."
+msgstr ""
+
 msgid "Max bridge length"
 msgstr "最大桥接长度"
 
@@ -7636,6 +7637,14 @@ msgstr "所有打印结束时的结尾G-code"
 msgid "End G-code when finish the printing of this filament"
 msgstr "结束使用该耗材打印时的结尾G-code"
 
+msgid "Ensure vertical shell thickness"
+msgstr "确保垂直外壳厚度"
+
+msgid ""
+"Add solid infill near sloping surfaces to guarantee the vertical shell "
+"thickness (top+bottom solid layers)"
+msgstr "在斜面表面附近添加实心填充，以保证垂直外壳厚度（顶部+底部实心层）"
+
 msgid "Top surface pattern"
 msgstr "顶面图案"
 
@@ -9796,6 +9805,9 @@ msgid ""
 "tool change"
 msgstr "换料时插入的G-code，包括T命令。"
 
+msgid "This gcode is inserted when the extrusion role is changed"
+msgstr ""
+
 msgid ""
 "Line width for top surfaces. If expressed as a %, it will be computed over "
 "the nozzle diameter."
@@ -10141,6 +10153,17 @@ msgstr ""
 "用于替换模型细小特征（根据最小特征尺寸）的墙线宽。如果墙最小线宽小于最小特征"
 "的厚度，则墙将变得和特征本身一样厚。参数值表示为相对喷嘴直径的百分比"
 
+msgid "Detect narrow internal solid infill"
+msgstr "识别狭窄内部实心填充"
+
+msgid ""
+"This option will auto detect narrow internal solid infill area. If enabled, "
+"concentric pattern will be used for the area to speed printing up. "
+"Otherwise, rectilinear pattern is used defaultly."
+msgstr ""
+"此选项用于自动识别内部狭窄的实心填充。开启后，将对狭窄实心区域使用同心填充加"
+"快打印速度。否则使用默认的直线填充。"
+
 msgid "invalid value "
 msgstr "非法的值 "
 
@@ -11522,6 +11545,34 @@ msgid ""
 "temperature. More info about this in the Wiki."
 msgstr ""
 
+#, c-format, boost-format
+#~ msgid ""
+#~ "The 3mf's version %s is newer than %s's version %s, Found following keys "
+#~ "unrecognized:"
+#~ msgstr "该3mf的版本%s比%s的版本%s新，发现以下参数键值无法识别:"
+
+#~ msgid "You'd better upgrade your software.\n"
+#~ msgstr "建议升级您的软件版本。\n"
+
+#~ msgid "Newer 3mf version"
+#~ msgstr "较新的3mf版本"
+
+#, c-format, boost-format
+#~ msgid ""
+#~ "The 3mf's version %s is newer than %s's version %s, Suggest to upgrade "
+#~ "your software."
+#~ msgstr "该3mf的版本%s比%s的版本%s要新，建议升级你的软件。"
+
+#~ msgid "Embeded"
+#~ msgstr "嵌入的"
+
+#~ msgid ""
+#~ "OrcaSlicer configuration file may be corrupted and is not abled to be "
+#~ "parsed.Please delete the file and try again."
+#~ msgstr ""
+#~ "OrcaSlicer 配置文件可能已损坏而无法解析。请删除此文件并重新启动"
+#~ "OrcaSlicer。"
+
 #~ msgid "Online Models"
 #~ msgstr "在线模型"
 
@@ -11567,14 +11618,6 @@ msgstr ""
 #~ msgid "Activate for better air filtration"
 #~ msgstr "激活以获得更好的空气过滤"
 
-#~ msgid "Ensure vertical shell thickness"
-#~ msgstr "确保垂直外壳厚度"
-
-#~ msgid ""
-#~ "Add solid infill near sloping surfaces to guarantee the vertical shell "
-#~ "thickness (top+bottom solid layers)"
-#~ msgstr "在斜面表面附近添加实心填充，以保证垂直外壳厚度（顶部+底部实心层）"
-
 #~ msgid "Temperature of vitrificaiton"
 #~ msgstr "软化温度"
 
@@ -11601,17 +11644,6 @@ msgstr ""
 #~ "辅助部件冷却风扇的转速。辅助部件冷却风扇将一直运行在该速度，除了设置的无需"
 #~ "冷却的前若干层"
 
-#~ msgid "Detect narrow internal solid infill"
-#~ msgstr "识别狭窄内部实心填充"
-
-#~ msgid ""
-#~ "This option will auto detect narrow internal solid infill area. If "
-#~ "enabled, concentric pattern will be used for the area to speed printing "
-#~ "up. Otherwise, rectilinear pattern is used defaultly."
-#~ msgstr ""
-#~ "此选项用于自动识别内部狭窄的实心填充。开启后，将对狭窄实心区域使用同心填充"
-#~ "加快打印速度。否则使用默认的直线填充。"
-
 #~ msgid ""
 #~ "Filter out gaps smaller than the threshold specified. This setting won't "
 #~ "affect top/bottom layers"

resources/profiles/Anker.json

@@ -1,6 +1,6 @@
 {
     "name": "Anker",
-    "version": "01.06.04.00",
+    "version": "01.08.00.00",
     "force_update": "0",
     "description": "Anker configurations",
     "machine_model_list": [

resources/profiles/Anker/machine/Anker M5.json

@@ -8,5 +8,8 @@
     "bed_model": "M5-CE-bed.stl",
     "bed_texture": "M5-CE-texture.svg",
     "hotend_model": "",
-    "default_materials": "Anker Generic ABS;Anker Generic PLA;Anker Generic PLA-CF;Anker Generic PETG;Anker Generic TPU;Anker Generic ASA;Anker Generic PVA"
+    "default_materials": "Anker Generic ABS;Anker Generic PLA;Anker Generic PLA-CF;Anker Generic PETG;Anker Generic TPU;Anker Generic ASA;Anker Generic PVA",
+    "retraction_length": [
+        "1.5"
+    ]
 }

resources/profiles/Anker/machine/Anker M5C.json

@@ -8,5 +8,8 @@
     "bed_model": "M5C-CE-bed.stl",
     "bed_texture": "M5-CE-texture.svg",
     "hotend_model": "",
-    "default_materials": "Anker Generic ABS;Anker Generic PLA;Anker Generic PLA-CF;Anker Generic PETG;Anker Generic TPU;Anker Generic ASA;Anker Generic PVA;Anker Generic PC;Anker Generic PA;Anker Generic PA-CF"
+    "default_materials": "Anker Generic ABS;Anker Generic PLA;Anker Generic PLA-CF;Anker Generic PETG;Anker Generic TPU;Anker Generic ASA;Anker Generic PVA;Anker Generic PC;Anker Generic PA;Anker Generic PA-CF",
+    "retraction_length": [
+        "0.8"
+    ]
 }

resources/profiles/Anker/machine/fdm_machine_common.json

@@ -3,7 +3,7 @@
     "name": "fdm_machine_common",
     "from": "system",
     "instantiation": "false",
-    "gcode_flavor": "marlin",
+    "gcode_flavor": "marlin2",
    	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n",
     "machine_start_gcode": "M4899 T3 ; Enable v3 jerk and S-curve acceleration \nM104 Sfirst_layer_temperature[0] ; Set hotend temp\nM190 S{first_layer_bed_temperature[0]} ; set and wait for bed temp to stabilize\nM109 S{first_layer_temperature[0]} ; set final nozzle temp to stabilize\nG28 ;Home",
     "machine_end_gcode": "M104 S0\nM140 S0\n;Retract the filament\nG92 E1\nG1 E-1 F300\nG28 X0 Y0\nM84",
@@ -88,9 +88,6 @@
     "retract_when_changing_layer": [
         "0"
     ],
-    "retraction_length": [
-        "1.5"
-    ],
     "retract_length_toolchange": [
         "2"
     ],

resources/profiles/Anycubic.json

@@ -1,6 +1,6 @@
 {
     "name": "Anycubic",
-    "version": "01.06.00.00",
+    "version": "01.08.00.00",
     "force_update": "0",
     "description": "Anycubic configurations",
     "machine_model_list": [

resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic 4MaxPro2.json

@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",

resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Chiron.json

@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",

resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic KobraMax.json

@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",

resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic KobraPlus.json

@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",

resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Vyper.json

@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",

resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic i3MegaS.json

@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",

resources/profiles/Anycubic/process/0.20mm Standard @Anycubic 4MaxPro2.json

@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",

resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Chiron.json

@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",

resources/profiles/Anycubic/process/0.20mm Standard @Anycubic KobraMax.json

@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",

resources/profiles/Anycubic/process/0.20mm Standard @Anycubic KobraPlus.json

@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",

resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Vyper.json

@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",

resources/profiles/Anycubic/process/0.20mm Standard @Anycubic i3MegaS.json

@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",

resources/profiles/Anycubic/process/0.30mm Draft @Anycubic 4MaxPro2.json

@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",

resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Chiron.json

@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",

resources/profiles/Anycubic/process/0.30mm Draft @Anycubic KobraMax.json

@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",

resources/profiles/Anycubic/process/0.30mm Draft @Anycubic KobraPlus.json

@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",

resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Vyper.json

@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",

resources/profiles/Anycubic/process/0.30mm Draft @Anycubic i3MegaS.json

@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",

resources/profiles/Anycubic/process/fdm_process_common.json

@@ -41,7 +41,7 @@
     "ironing_speed": "30",
     "ironing_type": "no ironing",
     "reduce_infill_retraction": "1",
-    "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
     "detect_overhang_wall": "1",
     "overhang_1_4_speed": "0",
     "overhang_2_4_speed": "50",

resources/profiles/Artillery.json

@@ -1,6 +1,6 @@
 {
     "name": "Artillery",
-    "version": "01.06.04.00",
+    "version": "01.08.00.00",
     "force_update": "0",
     "description": "Artillery configurations",
     "machine_model_list": [

resources/profiles/Artillery/process/0.15mm Optimal @Artillery Genius.json

@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",

resources/profiles/Artillery/process/0.16mm Optimal @Artillery Hornet.json

@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",

resources/profiles/Artillery/process/0.16mm Optimal @Artillery X1.json

@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",

resources/profiles/Artillery/process/0.20mm Standard @Artillery Genius.json

@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",

resources/profiles/Artillery/process/0.20mm Standard @Artillery Hornet.json

@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",

resources/profiles/Artillery/process/0.20mm Standard @Artillery X1.json

@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",

resources/profiles/Artillery/process/0.20mm Standard @Artillery X2.json

@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",

resources/profiles/Artillery/process/0.24mm Draft @Artillery Hornet.json

@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",

resources/profiles/Artillery/process/0.24mm Draft @Artillery X1.json

@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",

resources/profiles/Artillery/process/0.25mm Draft @Artillery Genius.json

@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",

resources/profiles/Artillery/process/fdm_process_common.json

@@ -41,7 +41,7 @@
     "ironing_speed": "30",
     "ironing_type": "no ironing",
     "reduce_infill_retraction": "1",
-    "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
     "detect_overhang_wall": "1",
     "overhang_1_4_speed": "0",
     "overhang_2_4_speed": "50",

resources/profiles/BBL.json

@@ -1,7 +1,7 @@
 {
     "name": "Bambulab",
     "url": "http://www.bambulab.com/Parameters/vendor/BBL.json",
-    "version": "01.07.00.29",
+    "version": "01.07.00.30",
     "force_update": "0",
     "description": "the initial version of BBL configurations",
     "machine_model_list": [

resources/profiles/BBL/filament/fdm_filament_abs.json

@@ -5,7 +5,7 @@
     "from": "system",
     "instantiation": "false",
     "activate_air_filtration": [
-        "1"
+        "0"
     ],
     "cool_plate_temp": [
         "0"

resources/profiles/BBL/filament/fdm_filament_asa.json

@@ -5,7 +5,7 @@
     "from": "system",
     "instantiation": "false",
     "activate_air_filtration": [
-        "1"
+        "0"
     ],
     "cool_plate_temp": [
         "0"

resources/profiles/BBL/process/fdm_process_bbl_common.json

@@ -29,7 +29,7 @@
     "ironing_type": "no ironing",
     "layer_height": "0.2",
     "reduce_infill_retraction": "1",
-    "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
     "detect_overhang_wall": "1",
     "overhang_1_4_speed": "0",
     "overhang_2_4_speed": "50",

resources/profiles/BIQU.json

@@ -1,6 +1,6 @@
 {
     "name": "BIQU",
-    "version": "01.06.00.00",
+    "version": "01.08.00.00",
     "force_update": "0",
     "description": "BIQU configurations",
     "machine_model_list": [

resources/profiles/BIQU/machine/BIQU B1 (0.4 nozzle).json

@@ -81,6 +81,6 @@
 "retraction_speed": [
     "70"
 ],
-"machine_start_gcode": "; BIQU B1 Start G-code\nM117 Getting the bed up to temp!\nM140 S{material_bed_temperature_layer_0}; Set Heat Bed temperature\nM190 S{material_bed_temperature_layer_0}; Wait for Heat Bed temperature\nM117 Getting the extruder up to temp!\nM104 S{material_print_temperature_layer_0}; Set Extruder temperature\nG92 E0; Reset Extruder\nM117 Homing axes\nG28; Home all axes\nM109 S{material_print_temperature_layer_0}; Wait for Extruder temperature\nG1 Z2.0 F3000; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X4.1 Y20 Z0.3 F5000.0; Move to start position\nM117 Purging\nG1 X4.1 Y200.0 Z0.3 F1500.0 E15; Draw the first line\nG1 X4.4 Y200.0 Z0.3 F5000.0; Move to side a little\nG1 X4.4 Y20 Z0.3 F1500.0 E30; Draw the second line\nG92 E0; Reset Extruder\nM117 Lets make\nG1 Z2.0 F3000; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.3 F5000.0; Move over to prevent blob squish",
-"machine_end_gcode": ";BIQU B1 Default End Gcode\nG91;Relative positioning\nG1 E-2 F2700;Retract a bit\nG1 E-2 Z0.2 F2400;Retract a bit more and raise Z\nG1 X5 Y5 F3000;Wipe out\nG1 Z10;Raise Z by 10mm\nG90;Return to absolute positioning\nG1 X0 Y{machine_depth};\nM106 S0;Turn-off fan\nM104 S0;Turn-off hotend\nM140 S0;Turn-off bed\nM84 X Y E;Disable all steppers but Z"
+"machine_start_gcode": "; BIQU B1 Start G-code\nM117 Getting the bed up to temp!\nM140 S[first_layer_bed_temperature]; Set Heat Bed temperature\nM190 S[first_layer_bed_temperature]; Wait for Heat Bed temperature\nM117 Getting the extruder up to temp!\nM104 S[first_layer_temperature]; Set Extruder temperature\nG92 E0; Reset Extruder\nM117 Homing axes\nG28; Home all axes\nM109 S[first_layer_temperature]; Wait for Extruder temperature\nG1 Z2.0 F3000; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X4.1 Y20 Z0.3 F5000.0; Move to start position\nM117 Purging\nG1 X4.1 Y200.0 Z0.3 F1500.0 E15; Draw the first line\nG1 X4.4 Y200.0 Z0.3 F5000.0; Move to side a little\nG1 X4.4 Y20 Z0.3 F1500.0 E30; Draw the second line\nG92 E0; Reset Extruder\nM117 Lets make\nG1 Z2.0 F3000; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.3 F5000.0; Move over to prevent blob squish",
+"machine_end_gcode": ";BIQU B1 Default End Gcode\nG91;Relative positioning\nG1 E-2 F2700;Retract a bit\nG1 E-2 Z0.2 F2400;Retract a bit more and raise Z\nG1 X5 Y5 F3000;Wipe out\nG1 Z10;Raise Z by 10mm\nG90;Return to absolute positioning\nG1 X0 Y{print_bed_max[1]};\nM106 S0;Turn-off fan\nM104 S0;Turn-off hotend\nM140 S0;Turn-off bed\nM84 X Y E;Disable all steppers but Z"
 }

resources/profiles/BIQU/machine/BIQU BX (0.4 nozzle).json

@@ -81,6 +81,6 @@
 "retraction_speed": [
     "40"
 ],
-"machine_start_gcode": "; BIQU BX Start G-code\n;M117 Initial homing sequence; Home so that the probe is positioned to heat\nG28\nM117 Probe heating position\nG0 X65 Y5 Z1; Move the probe to the heating position.\nM117 Getting the heaters up to temp!\nM104 S140; Set Extruder temperature, no wait\nM140 S60; Set Heat Bed temperature\nM190 S60; Wait for Heat Bed temperature\nM117 Waiting for probe to warm; Wait another 90s for the probe to absorb heat.\nG4 S90\nM117 Post warming re-home\nG28; Home all axes again after warming\nM117 Z-Dance of my people\nG34\nM117 ABL Probing\nG29\nM900 K0 L0 T0;Edit the K and L values if you have calibrated a k factor for your filament\nM900 T0 S0\nG1 Z2.0 F3000; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X4.1 Y10 Z0.3 F5000.0; Move to start position\nM117 Getting the extruder up to temp\nM140 S{material_bed_temperature_layer_0}; Set Heat Bed temperature\nM104 S{material_print_temperature_layer_0}; Set Extruder temperature\nM109 S{material_print_temperature_layer_0}; Wait for Extruder temperature\nM190 S{material_bed_temperature_layer_0}; Wait for Heat Bed temperature\nG92 E0; Reset Extruder\nM117 Purging\nG1 X4.1 Y200.0 Z0.3 F1500.0 E15; Draw the first line\nG1 X4.4 Y200.0 Z0.3 F5000.0; Move to side a little\nG1 X4.4 Y20 Z0.3 F1500.0 E30; Draw the second line\nG92 E0; Reset Extruder\nM117 Lets make\nG1 X8 Y20 Z0.3 F5000.0; Move over to prevent blob squish",
-"machine_end_gcode": "; BIQU BX Default End Gcode\nG91;Relative positioning\nG1 E-2 F2700;Retract a bit\nG1 E-2 Z0.2 F2400;Retract a bit more and raise Z\nG1 X5 Y5 F3000;Wipe out\nG1 Z10;Raise Z by 10mm\nG90;Return to absolute positioning\nG1 X0 Y{machine_depth};TaDaaaa\nM106 S0;Turn-off fan\nM104 S0;Turn-off hotend\nM140 S0;Turn-off bed\nM84 X Y E;Disable all steppers but Z"
+"machine_start_gcode": "; BIQU BX Start G-code\n;M117 Initial homing sequence; Home so that the probe is positioned to heat\nG28\nM117 Probe heating position\nG0 X65 Y5 Z1; Move the probe to the heating position.\nM117 Getting the heaters up to temp!\nM104 S140; Set Extruder temperature, no wait\nM140 S60; Set Heat Bed temperature\nM190 S60; Wait for Heat Bed temperature\nM117 Waiting for probe to warm; Wait another 90s for the probe to absorb heat.\nG4 S90\nM117 Post warming re-home\nG28; Home all axes again after warming\nM117 Z-Dance of my people\nG34\nM117 ABL Probing\nG29\nM900 K0 L0 T0;Edit the K and L values if you have calibrated a k factor for your filament\nM900 T0 S0\nG1 Z2.0 F3000; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X4.1 Y10 Z0.3 F5000.0; Move to start position\nM117 Getting the extruder up to temp\nM140 S[first_layer_bed_temperature]; Set Heat Bed temperature\nM104 S[first_layer_temperature]; Set Extruder temperature\nM109 S[first_layer_temperature]; Wait for Extruder temperature\nM190 S[first_layer_bed_temperature]; Wait for Heat Bed temperature\nG92 E0; Reset Extruder\nM117 Purging\nG1 X4.1 Y200.0 Z0.3 F1500.0 E15; Draw the first line\nG1 X4.4 Y200.0 Z0.3 F5000.0; Move to side a little\nG1 X4.4 Y20 Z0.3 F1500.0 E30; Draw the second line\nG92 E0; Reset Extruder\nM117 Lets make\nG1 X8 Y20 Z0.3 F5000.0; Move over to prevent blob squish",
+"machine_end_gcode": "; BIQU BX Default End Gcode\nG91;Relative positioning\nG1 E-2 F2700;Retract a bit\nG1 E-2 Z0.2 F2400;Retract a bit more and raise Z\nG1 X5 Y5 F3000;Wipe out\nG1 Z10;Raise Z by 10mm\nG90;Return to absolute positioning\nG1 X0 Y{print_bed_max[1]};TaDaaaa\nM106 S0;Turn-off fan\nM104 S0;Turn-off hotend\nM140 S0;Turn-off bed\nM84 X Y E;Disable all steppers but Z"
 }

resources/profiles/BIQU/process/fdm_process_biqu_common.json

@@ -43,7 +43,7 @@
     "ironing_type": "no ironing",
     "layer_height": "0.2",
     "reduce_infill_retraction": "1",
-    "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
     "detect_overhang_wall": "1",
     "overhang_1_4_speed": "0",
     "overhang_2_4_speed": "20",

resources/profiles/BIQU/process/fdm_process_hurakan_common.json

@@ -43,7 +43,7 @@
     "ironing_type": "no ironing",
     "layer_height": "0.2",
     "reduce_infill_retraction": "1",
-    "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
     "detect_overhang_wall": "1",
     "overhang_1_4_speed": "0",
     "overhang_2_4_speed": "20",

resources/profiles/Comgrow.json

@@ -1,6 +1,6 @@
 {
 	"name": "Comgrow",
-	"version": "01.07.00.00",
+	"version": "01.08.00.00",
 	"force_update": "0",
 	"description": "Comgrow configurations",
 	"machine_model_list": [

resources/profiles/Comgrow/filament/Comgrow Generic PETG.json

@@ -11,12 +11,13 @@
 	"fan_cooling_layer_time": ["30"],
 	"overhang_fan_speed": ["90"],
 	"overhang_fan_threshold": ["25%"],
-	"fan_max_speed": ["90"],
-	"fan_min_speed": ["40"],
+	"fan_max_speed": ["25"],
+	"fan_min_speed": ["10"],
 	"slow_down_min_speed": ["10"],
 	"slow_down_layer_time": ["8"],
-	"filament_flow_ratio": ["0.95"],
-	"filament_max_volumetric_speed": ["30"],
+	"filament_flow_ratio": ["0.98"],
+	"filament_max_volumetric_speed": ["8"],
+	"nozzle_temperature_initial_layer": ["260"],
 	"filament_retraction_length": ["0.5"],
 	"filament_start_gcode": ["; filament start gcode\n"],
 	"compatible_printers": [

resources/profiles/Comgrow/machine/fdm_comgrow_common.json

@@ -18,16 +18,16 @@
     "5000"
   ],
   "machine_max_acceleration_travel": [
-    "20000",
-    "20000"
+    "3000",
+    "3000"
   ],
   "machine_max_acceleration_x": [
-    "8000",
-    "8000"
+    "3000",
+    "3000"
   ],
   "machine_max_acceleration_y": [
-    "8000",
-    "8000"
+    "3000",
+    "3000"
   ],
   "machine_max_acceleration_z": [
     "500",
@@ -38,12 +38,12 @@
     "25"
   ],
   "machine_max_speed_x": [
-    "500",
-    "200"
+    "300",
+    "300"
   ],
   "machine_max_speed_y": [
-    "500",
-    "200"
+    "300",
+    "300"
   ],
   "machine_max_speed_z": [
     "12",
@@ -79,7 +79,7 @@
   "min_layer_height": [
     "0.08"
   ],
-  "printable_height": "250",
+  "printable_height": "500",
   "extruder_clearance_radius": "65",
   "extruder_clearance_height_to_rod": "36",
   "extruder_clearance_height_to_lid": "140",
@@ -124,6 +124,12 @@
   "wipe": [
     "1"
   ],
+  "thumbnails": [
+    "32x32",
+    "300x300"
+  ],
+  "thumbnails_format": "PNG",
+  "nozzle_type": "hardened_steel",
   "default_filament_profile": [
     "Comgrow Generic PETG"
   ],
@@ -136,6 +142,5 @@
   "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
   "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
   "scan_first_layer": "0",
-  "nozzle_type": "undefine",
   "auxiliary_fan": "0"
 }

resources/profiles/Comgrow/process/0.16mm Opitmal @Comgrow T500 0.6.json

@@ -18,9 +18,6 @@
 	"brim_object_gap": "0",
 	"compatible_printers_condition": "",
 	"print_sequence": "by layer",
-	"default_acceleration": "3000",
-	"outer_wall_acceleration": "3000",
-	"top_surface_acceleration": "3000",
 	"bridge_no_support": "0",
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.1",
@@ -31,9 +28,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "grid",
-	"initial_layer_acceleration": "1000",
-	"travel_acceleration": "3000",
-	"inner_wall_acceleration": "3000",
 	"initial_layer_line_width": "0.6",
 	"initial_layer_print_height": "0.2",
 	"infill_combination": "0",

resources/profiles/Comgrow/process/0.16mm Optimal @Comgrow T500 0.4.json

@@ -18,9 +18,6 @@
 	"brim_object_gap": "0",
 	"compatible_printers_condition": "",
 	"print_sequence": "by layer",
-	"default_acceleration": "8000",
-	"outer_wall_acceleration": "8000",
-	"top_surface_acceleration": "8000",
 	"bridge_no_support": "0",
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.1",
@@ -31,9 +28,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "grid",
-	"initial_layer_acceleration": "1000",
-	"travel_acceleration": "8000",
-	"inner_wall_acceleration": "8000",
 	"initial_layer_line_width": "0.4",
 	"initial_layer_print_height": "0.2",
 	"infill_combination": "0",

resources/profiles/Comgrow/process/0.18mm Optimal @Comgrow T500.json

@@ -18,9 +18,6 @@
 	"brim_object_gap": "0",
 	"compatible_printers_condition": "",
 	"print_sequence": "by layer",
-	"default_acceleration": "0",
-	"outer_wall_acceleration": "0",
-	"top_surface_acceleration": "0",
 	"bridge_no_support": "0",
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.1",
@@ -31,9 +28,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "grid",
-	"initial_layer_acceleration": "0",
-	"travel_acceleration": "0",
-	"inner_wall_acceleration": "0",
 	"initial_layer_line_width": "0.42",
 	"initial_layer_print_height": "0.24",
 	"infill_combination": "0",

resources/profiles/Comgrow/process/0.20mm Standard @Comgrow T500 0.4.json

@@ -18,9 +18,6 @@
 	"brim_object_gap": "0",
 	"compatible_printers_condition": "",
 	"print_sequence": "by layer",
-	"default_acceleration": "8000",
-	"outer_wall_acceleration": "8000",
-	"top_surface_acceleration": "8000",
 	"bridge_no_support": "0",
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.1",
@@ -31,9 +28,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "grid",
-	"initial_layer_acceleration": "1000",
-	"travel_acceleration": "8000",
-	"inner_wall_acceleration": "8000",
 	"initial_layer_line_width": "0.4",
 	"initial_layer_print_height": "0.24",
 	"infill_combination": "0",

resources/profiles/Comgrow/process/0.20mm Standard @Comgrow T500 0.6.json

@@ -18,9 +18,6 @@
 	"brim_object_gap": "0",
 	"compatible_printers_condition": "",
 	"print_sequence": "by layer",
-	"default_acceleration": "3000",
-	"outer_wall_acceleration": "3000",
-	"top_surface_acceleration": "3000",
 	"bridge_no_support": "0",
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.1",
@@ -31,9 +28,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "grid",
-	"initial_layer_acceleration": "1000",
-	"travel_acceleration": "3000",
-	"inner_wall_acceleration": "3000",
 	"initial_layer_line_width": "0.6",
 	"initial_layer_print_height": "0.24",
 	"infill_combination": "0",

resources/profiles/Comgrow/process/0.20mm Standard @Comgrow T500 1.0.json

@@ -18,9 +18,6 @@
 	"brim_object_gap": "0",
 	"compatible_printers_condition": "",
 	"print_sequence": "by layer",
-	"default_acceleration": "3000",
-	"outer_wall_acceleration": "3000",
-	"top_surface_acceleration": "3000",
 	"bridge_no_support": "0",
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.1",
@@ -31,9 +28,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "grid",
-	"initial_layer_acceleration": "1000",
-	"travel_acceleration": "3000",
-	"inner_wall_acceleration": "3000",
 	"initial_layer_line_width": "1.0",
 	"initial_layer_print_height": "0.28",
 	"infill_combination": "0",

resources/profiles/Comgrow/process/0.20mm Standard @Comgrow T500.json

@@ -18,9 +18,6 @@
 	"brim_object_gap": "0",
 	"compatible_printers_condition": "",
 	"print_sequence": "by layer",
-	"default_acceleration": "0",
-	"outer_wall_acceleration": "0",
-	"top_surface_acceleration": "0",
 	"bridge_no_support": "0",
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.1",
@@ -31,9 +28,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "grid",
-	"initial_layer_acceleration": "0",
-	"travel_acceleration": "0",
-	"inner_wall_acceleration": "0",
 	"initial_layer_line_width": "0.42",
 	"initial_layer_print_height": "0.24",
 	"infill_combination": "0",

resources/profiles/Comgrow/process/0.24mm Draft @Comgrow T500 0.4.json

@@ -18,9 +18,6 @@
 	"brim_object_gap": "0",
 	"compatible_printers_condition": "",
 	"print_sequence": "by layer",
-	"default_acceleration": "8000",
-	"outer_wall_acceleration": "8000",
-	"top_surface_acceleration": "8000",
 	"bridge_no_support": "0",
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.1",
@@ -31,9 +28,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "grid",
-	"initial_layer_acceleration": "1000",
-	"travel_acceleration": "8000",
-	"inner_wall_acceleration": "8000",
 	"initial_layer_line_width": "0.4",
 	"initial_layer_print_height": "0.28",
 	"infill_combination": "0",

resources/profiles/Comgrow/process/0.24mm Draft @Comgrow T500 0.6.json

@@ -18,9 +18,6 @@
 	"brim_object_gap": "0",
 	"compatible_printers_condition": "",
 	"print_sequence": "by layer",
-	"default_acceleration": "3000",
-	"outer_wall_acceleration": "3000",
-	"top_surface_acceleration": "3000",
 	"bridge_no_support": "0",
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.1",
@@ -31,9 +28,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "grid",
-	"initial_layer_acceleration": "1000",
-	"travel_acceleration": "3000",
-	"inner_wall_acceleration": "3000",
 	"initial_layer_line_width": "0.6",
 	"initial_layer_print_height": "0.28",
 	"infill_combination": "0",

resources/profiles/Comgrow/process/0.24mm Optimal @Comgrow T500 0.8.json

@@ -18,9 +18,6 @@
 	"brim_object_gap": "0",
 	"compatible_printers_condition": "",
 	"print_sequence": "by layer",
-	"default_acceleration": "3000",
-	"outer_wall_acceleration": "3000",
-	"top_surface_acceleration": "3000",
 	"bridge_no_support": "0",
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.1",
@@ -31,9 +28,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "grid",
-	"initial_layer_acceleration": "1000",
-	"travel_acceleration": "3000",
-	"inner_wall_acceleration": "3000",
 	"initial_layer_line_width": "0.8",
 	"initial_layer_print_height": "0.28",
 	"infill_combination": "0",

resources/profiles/Comgrow/process/0.28mm SuperDraft @Comgrow T500 0.4.json

@@ -18,9 +18,6 @@
 	"brim_object_gap": "0",
 	"compatible_printers_condition": "",
 	"print_sequence": "by layer",
-	"default_acceleration": "8000",
-	"outer_wall_acceleration": "8000",
-	"top_surface_acceleration": "8000",
 	"bridge_no_support": "0",
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.1",
@@ -31,9 +28,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "grid",
-	"initial_layer_acceleration": "1000",
-	"travel_acceleration": "8000",
-	"inner_wall_acceleration": "8000",
 	"initial_layer_line_width": "0.4",
 	"initial_layer_print_height": "0.32",
 	"infill_combination": "0",

resources/profiles/Comgrow/process/0.28mm SuperDraft @Comgrow T500 0.6.json

@@ -18,9 +18,6 @@
 	"brim_object_gap": "0",
 	"compatible_printers_condition": "",
 	"print_sequence": "by layer",
-	"default_acceleration": "3000",
-	"outer_wall_acceleration": "3000",
-	"top_surface_acceleration": "3000",
 	"bridge_no_support": "0",
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.1",
@@ -31,9 +28,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "grid",
-	"initial_layer_acceleration": "1000",
-	"travel_acceleration": "3000",
-	"inner_wall_acceleration": "3000",
 	"initial_layer_line_width": "0.6",
 	"initial_layer_print_height": "0.32",
 	"infill_combination": "0",

resources/profiles/Comgrow/process/0.32mm Standard @Comgrow T500 0.8.json

@@ -18,9 +18,6 @@
 	"brim_object_gap": "0",
 	"compatible_printers_condition": "",
 	"print_sequence": "by layer",
-	"default_acceleration": "3000",
-	"outer_wall_acceleration": "3000",
-	"top_surface_acceleration": "3000",
 	"bridge_no_support": "0",
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.1",
@@ -31,9 +28,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "grid",
-	"initial_layer_acceleration": "1000",
-	"travel_acceleration": "3000",
-	"inner_wall_acceleration": "3000",
 	"initial_layer_line_width": "0.8",
 	"initial_layer_print_height": "0.36",
 	"infill_combination": "0",

resources/profiles/Comgrow/process/0.40mm Draft @Comgrow T500 0.8.json

@@ -18,9 +18,6 @@
 	"brim_object_gap": "0",
 	"compatible_printers_condition": "",
 	"print_sequence": "by layer",
-	"default_acceleration": "3000",
-	"outer_wall_acceleration": "3000",
-	"top_surface_acceleration": "3000",
 	"bridge_no_support": "0",
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.1",
@@ -31,9 +28,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "grid",
-	"initial_layer_acceleration": "1000",
-	"travel_acceleration": "3000",
-	"inner_wall_acceleration": "3000",
 	"initial_layer_line_width": "0.8",
 	"initial_layer_print_height": "0.44",
 	"infill_combination": "0",

resources/profiles/Comgrow/process/0.48mm Draft @Comgrow T500 0.8.json

@@ -18,9 +18,6 @@
 	"brim_object_gap": "0",
 	"compatible_printers_condition": "",
 	"print_sequence": "by layer",
-	"default_acceleration": "3000",
-	"outer_wall_acceleration": "3000",
-	"top_surface_acceleration": "3000",
 	"bridge_no_support": "0",
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.1",
@@ -31,9 +28,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "grid",
-	"initial_layer_acceleration": "1000",
-	"travel_acceleration": "3000",
-	"inner_wall_acceleration": "3000",
 	"initial_layer_line_width": "0.8",
 	"initial_layer_print_height": "0.52",
 	"infill_combination": "0",

resources/profiles/Comgrow/process/0.56mm SuperDraft @Comgrow T500 0.8.json

@@ -18,9 +18,6 @@
 	"brim_object_gap": "0",
 	"compatible_printers_condition": "",
 	"print_sequence": "by layer",
-	"default_acceleration": "3000",
-	"outer_wall_acceleration": "3000",
-	"top_surface_acceleration": "3000",
 	"bridge_no_support": "0",
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.1",
@@ -31,9 +28,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "grid",
-	"initial_layer_acceleration": "1000",
-	"travel_acceleration": "3000",
-	"inner_wall_acceleration": "3000",
 	"initial_layer_line_width": "0.8",
 	"initial_layer_print_height": "0.60",
 	"infill_combination": "0",

resources/profiles/Comgrow/process/fdm_process_comgrow_common.json

@@ -1,104 +1,229 @@
 {
-    "type": "process",
-    "name": "fdm_process_comgrow_common",
-    "from": "system",
-    "instantiation": "false",
-    "inherits": "fdm_process_common",
-    "adaptive_layer_height": "0",
-    "reduce_crossing_wall": "0",
-    "max_travel_detour_distance": "0",
-    "bottom_surface_pattern": "monotonic",
-    "bottom_shell_layers": "3",
+    "accel_to_decel_enable": "1",
+    "accel_to_decel_factor": "50%",
+    "bottom_shell_layers": "2",
     "bottom_shell_thickness": "0",
-    "bridge_flow": "0.95",
-    "bridge_speed": "25",
-    "brim_width": "5",
-    "brim_object_gap": "0.1",
-    "compatible_printers_condition": "",
-    "print_sequence": "by layer",
-    "default_acceleration": "500",
-    "top_surface_acceleration": "500",
+    "bottom_solid_infill_flow_ratio": "1",
+    "bottom_surface_pattern": "monotonic",
+    "bridge_acceleration": "50%",
+    "bridge_angle": "0",
+    "bridge_density": "100%",
+    "bridge_flow": "0.85",
     "bridge_no_support": "0",
+    "bridge_speed": "25",
+    "brim_ears_detection_length": "1",
+    "brim_ears_max_angle": "125",
+    "brim_object_gap": "0",
+    "brim_type": "auto_brim",
+    "brim_width": "0",
+    "compatible_printers_condition": "",
+    "default_acceleration": "3000",
+    "default_jerk": "0",
+    "detect_overhang_wall": "1",
+    "detect_thin_wall": "1",
     "draft_shield": "disabled",
-    "elefant_foot_compensation": "0",
+    "elefant_foot_compensation": "0.1",
+    "elefant_foot_compensation_layers": "1",
     "enable_arc_fitting": "0",
-    "outer_wall_line_width": "0.4",
-    "wall_infill_order": "inner wall/outer wall/infill",
-    "line_width": "0.4",
-    "infill_direction": "45",
-    "sparse_infill_density": "15%",
-    "sparse_infill_pattern": "grid",
-    "initial_layer_acceleration": "500",
-    "travel_acceleration": "700",
-    "inner_wall_acceleration": "500",
-    "initial_layer_line_width": "0.5",
-    "initial_layer_print_height": "0.2",
+    "enable_overhang_speed": "1",
+    "enable_prime_tower": "0",
+    "enable_support": "0",
+    "enforce_support_layers": "0",
+    "exclude_object": "0",
+    "extra_perimeters_on_overhangs": "0",
+    "filename_format": "{printer_model}_{input_filename_base}_{filament_type[0]}_{layer_height}_{print_time}.gcode",
+    "filter_out_gap_fill": "0",
+    "flush_into_infill": "0",
+    "flush_into_objects": "0",
+    "flush_into_support": "1",
+    "from": "",
+    "fuzzy_skin": "none",
+    "fuzzy_skin_point_distance": "0.8",
+    "fuzzy_skin_thickness": "0.3",
+    "gap_infill_speed": "70",
+    "gcode_add_line_number": "0",
+    "gcode_comments": "0",
+    "gcode_label_objects": "0",
+    "hole_to_polyhole": "0",
+    "hole_to_polyhole_threshold": "0.01",
+    "hole_to_polyhole_twisted": "1",
+    "independent_support_layer_height": "1",
+    "infill_anchor": "400%",
+    "infill_anchor_max": "20",
     "infill_combination": "0",
-    "sparse_infill_line_width": "0.45",
+    "infill_direction": "45",
+    "infill_jerk": "9",
     "infill_wall_overlap": "23%",
+    "inherits": "fdm_process_common",
+    "initial_layer_acceleration": "1000",
+    "initial_layer_infill_speed": "60",
+    "initial_layer_jerk": "9",
+    "initial_layer_line_width": "0.4",
+    "initial_layer_min_bead_width": "85%",
+    "initial_layer_print_height": "0.24",
+    "initial_layer_speed": "40",
+    "initial_layer_travel_speed": "100%",
+    "inner_wall_acceleration": "3000",
+    "inner_wall_jerk": "9",
+    "inner_wall_line_width": "0.4",
+    "inner_wall_speed": "160",
     "interface_shells": "0",
+    "internal_bridge_speed": "150%",
+    "internal_solid_infill_acceleration": "100%",
+    "internal_solid_infill_line_width": "0",
+    "internal_solid_infill_pattern": "monotonic",
+    "internal_solid_infill_speed": "200",
+    "ironing_angle": "-1",
     "ironing_flow": "15%",
-    "ironing_spacing": "0.1",
+    "ironing_pattern": "zig-zag",
+    "ironing_spacing": "0.25",
     "ironing_speed": "15",
     "ironing_type": "no ironing",
     "layer_height": "0.2",
-    "reduce_infill_retraction": "1",
-    "filename_format": "{printer_model}_{input_filename_base}_{filament_type[0]}_{layer_height}_{print_time}.gcode",
-    "detect_overhang_wall": "1",
+    "line_width": "0.4",
+    "make_overhang_printable": "0",
+    "make_overhang_printable_angle": "55",
+    "make_overhang_printable_hole_size": "0",
+    "max_bridge_length": "10",
+    "max_travel_detour_distance": "0",
+    "max_volumetric_extrusion_rate_slope": "0",
+    "max_volumetric_extrusion_rate_slope_segment_length": "3",
+    "min_bead_width": "85%",
+    "min_feature_size": "25%",
+    "min_width_top_surface": "300%",
+    "minimum_sparse_infill_area": "10",
+    "only_one_wall_first_layer": "0",
+    "only_one_wall_top": "0",
+    "ooze_prevention": "0",
+    "outer_wall_acceleration": "1000",
+    "outer_wall_jerk": "9",
+    "outer_wall_speed": "140",
     "overhang_1_4_speed": "0",
     "overhang_2_4_speed": "20",
     "overhang_3_4_speed": "15",
     "overhang_4_4_speed": "10",
-    "inner_wall_line_width": "0.45",
-    "wall_loops": "3",
-    "print_settings_id": "",
-    "raft_layers": "0",
-    "seam_position": "aligned",
-    "skirt_distance": "2",
-    "skirt_height": "1",
-    "skirt_loops": "1",
-    "minimum_sparse_infill_area": "15",
-    "internal_solid_infill_line_width": "0.4",
-    "spiral_mode": "0",
-    "standby_temperature_delta": "-5",
-    "enable_support": "0",
-    "resolution": "0.012",
-    "support_type": "normal(auto)",
-    "support_style": "default",
-    "support_on_build_plate_only": "0",
-    "support_top_z_distance": "0.2",
-    "support_filament": "0",
-    "support_line_width": "0.4",
-    "support_interface_loop_pattern": "0",
-    "support_interface_filament": "0",
-    "support_interface_top_layers": "2",
-    "support_interface_bottom_layers": "2",
-    "support_interface_spacing": "0.5",
-    "support_interface_speed": "80",
-    "support_base_pattern": "rectilinear",
-    "support_base_pattern_spacing": "2.5",
-    "support_speed": "150",
-    "support_threshold_angle": "30",
-    "support_object_xy_distance": "0.35",
-    "tree_support_branch_angle": "45",
-    "tree_support_wall_count": "0",
-    "detect_thin_wall": "0",
-    "top_surface_pattern": "monotonic",
-    "top_surface_line_width": "0.4",
-    "top_shell_layers": "3",
-    "top_shell_thickness": "0.8",
-    "initial_layer_speed": "15",
-    "initial_layer_infill_speed": "20",
-    "outer_wall_speed": "25",
-    "inner_wall_speed": "40",
-    "internal_solid_infill_speed": "40",
-    "top_surface_speed": "30",
-    "gap_infill_speed": "30",
-    "sparse_infill_speed": "50",
-    "travel_speed": "150",
-    "enable_prime_tower": "0",
-    "wipe_tower_no_sparse_layers": "0",
+    "overhang_reverse": "0",
+    "overhang_reverse_threshold": "50%",
+    "overhang_speed_classic": "0",
+    "post_process": [],
+    "precise_outer_wall": "0",
+    "prime_tower_brim_width": "3",
     "prime_tower_width": "60",
-    "xy_hole_compensation": "0",
-    "xy_contour_compensation": "0"
+    "prime_volume": "45",
+    "print_flow_ratio": "1",
+    "print_sequence": "by layer",
+    "raft_contact_distance": "0.1",
+    "raft_expansion": "1.5",
+    "raft_first_layer_density": "90%",
+    "raft_first_layer_expansion": "2",
+    "raft_layers": "0",
+    "reduce_crossing_wall": "0",
+    "reduce_infill_retraction": "1",
+    "resolution": "0.012",
+    "role_based_wipe_speed": "1",
+    "seam_gap": "5%",
+    "seam_position": "aligned",
+    "single_extruder_multi_material_priming": "1",
+    "skirt_distance": "3",
+    "skirt_height": "2",
+    "skirt_loops": "0",
+    "skirt_speed": "50",
+    "slice_closing_radius": "0.049",
+    "slicing_mode": "regular",
+    "slow_down_layers": "0",
+    "slowdown_for_curled_perimeters": "0",
+    "small_perimeter_speed": "50%",
+    "small_perimeter_threshold": "0",
+    "solid_infill_filament": "1",
+    "sparse_infill_acceleration": "100%",
+    "sparse_infill_density": "10%",
+    "sparse_infill_filament": "1",
+    "sparse_infill_line_width": "0.4",
+    "sparse_infill_pattern": "adaptivecubic",
+    "sparse_infill_speed": "200",
+    "spiral_mode": "0",
+    "staggered_inner_seams": "0",
+    "standby_temperature_delta": "-5",
+    "support_angle": "0",
+    "support_base_pattern": "rectilinear",
+    "support_base_pattern_spacing": "0.2",
+    "support_bottom_interface_spacing": "0.5",
+    "support_bottom_z_distance": "0.2",
+    "support_critical_regions_only": "0",
+    "support_expansion": "0",
+    "support_filament": "0",
+    "support_interface_bottom_layers": "-1",
+    "support_interface_filament": "0",
+    "support_interface_loop_pattern": "0",
+    "support_interface_pattern": "rectilinear",
+    "support_interface_spacing": "0.2",
+    "support_interface_speed": "80",
+    "support_interface_top_layers": "3",
+    "support_object_xy_distance": "0.35",
+    "support_on_build_plate_only": "0",
+    "support_remove_small_overhang": "1",
+    "support_speed": "140",
+    "support_style": "grid",
+    "support_threshold_angle": "40",
+    "support_top_z_distance": "0.15",
+    "support_type": "normal(auto)",
+    "thick_bridges": "0",
+    "timelapse_type": "0",
+    "top_shell_layers": "2",
+    "top_solid_infill_flow_ratio": "1",
+    "top_surface_acceleration": "2000",
+    "top_surface_jerk": "9",
+    "top_surface_line_width": "0.4",
+    "top_surface_pattern": "monotonic",
+    "top_surface_speed": "40",
+    "travel_acceleration": "3000",
+    "travel_jerk": "12",
+    "travel_speed": "200",
+    "travel_speed_z": "0",
+    "tree_support_adaptive_layer_height": "1",
+    "tree_support_angle_slow": "25",
+    "tree_support_auto_brim": "1",
+    "tree_support_branch_angle": "40",
+    "tree_support_branch_angle_organic": "40",
+    "tree_support_branch_diameter": "5",
+    "tree_support_branch_diameter_angle": "5",
+    "tree_support_branch_diameter_double_wall": "3",
+    "tree_support_branch_diameter_organic": "2",
+    "tree_support_branch_distance": "5",
+    "tree_support_branch_distance_organic": "1",
+    "tree_support_brim_width": "3",
+    "tree_support_tip_diameter": "0.8",
+    "tree_support_top_rate": "30%",
+    "tree_support_wall_count": "0",
+    "version": "1.7.0.0",
+    "wall_distribution_count": "1",
+    "wall_filament": "1",
+    "wall_generator": "arachne",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "wall_loops": "3",
+    "wall_transition_angle": "10",
+    "wall_transition_filter_deviation": "25%",
+    "wall_transition_length": "100%",
+    "wipe_on_loops": "0",
+    "wipe_speed": "80%",
+    "wipe_tower_bridging": "10",
+    "wipe_tower_cone_angle": "0",
+    "wipe_tower_extra_spacing": "100%",
+    "wipe_tower_extruder": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "wipe_tower_rotation_angle": "0",
+    "wiping_volumes_extruders": [
+        "70",
+        "70",
+        "70",
+        "70",
+        "70",
+        "70",
+        "70",
+        "70",
+        "70",
+        "70"
+    ],
+    "xy_contour_compensation": "0",
+    "xy_hole_compensation": "0"
 }

resources/profiles/Creality.json

@@ -1,6 +1,6 @@
 {
 	"name": "Creality",
-	"version": "01.07.00.00",
+	"version": "01.08.00.00",
 	"force_update": "0",
 	"description": "Creality configurations",
 	"machine_model_list": [

resources/profiles/Creality/machine/Creality K1 Max.json

@@ -8,5 +8,5 @@
     "bed_model": "creality_k1max_buildplate_model.stl",
     "bed_texture": "creality_k1max_buildplate_texture.png",
     "hotend_model": "",
-    "default_materials": "Creality Generic PLA @0.4 nozzle;Creality HF Generic PLA @0.4 nozzle;Creality HF Generic Speed PLA @0.4 nozzle;Creality Generic PETG @0.4 nozzle;Creality Generic TPU @0.4 nozzle;Creality Generic ABS @0.4 nozzle;Creality Generic PLA @0.6 nozzle;Creality HF Generic PLA @0.6 nozzle;Creality HF Generic Speed PLA @0.6 nozzle;Creality Generic PETG @0.6 nozzle;Creality Generic TPU @0.6 nozzle;Creality Generic ABS @0.6 nozzle;Creality Generic PLA @0.8 nozzle;Creality HF Generic PLA @0.8 nozzle;Creality HF Generic Speed PLA @0.8 nozzle;Creality Generic PETG @0.8 nozzle;Creality Generic TPU @0.8 nozzle;Creality Generic ABS @0.8 nozzle"
+    "default_materials": "Creality Generic PLA;Creality HF Generic PLA;Creality HF Generic Speed PLA;Creality Generic PETG;Creality Generic TPU;Creality Generic ABS"
 }

resources/profiles/Creality/machine/Creality K1.json

@@ -8,5 +8,5 @@
     "bed_model": "creality_k1_buildplate_model.stl",
     "bed_texture": "creality_k1_buildplate_texture.png",
     "hotend_model": "",
-    "default_materials": "Creality Generic PLA @0.4 nozzle;Creality HF Generic PLA @0.4 nozzle;Creality HF Generic Speed PLA @0.4 nozzle;Creality Generic PETG @0.4 nozzle;Creality Generic TPU @0.4 nozzle;Creality Generic ABS @0.4 nozzle;Creality Generic PLA @0.6 nozzle;Creality HF Generic PLA @0.6 nozzle;Creality HF Generic Speed PLA @0.6 nozzle;Creality Generic PETG @0.6 nozzle;Creality Generic TPU @0.6 nozzle;Creality Generic ABS @0.6 nozzle;Creality Generic PLA @0.8 nozzle;Creality HF Generic PLA @0.8 nozzle;Creality HF Generic Speed PLA @0.8 nozzle;Creality Generic PETG @0.8 nozzle;Creality Generic TPU @0.8 nozzle;Creality Generic ABS @0.8 nozzle"
+    "default_materials": "Creality Generic PLA;Creality HF Generic PLA;Creality HF Generic Speed PLA;Creality Generic PETG;Creality Generic TPU;Creality Generic ABS"
 }

resources/profiles/Creality/process/0.12mm Fine @Creality CR10Max.json

@@ -44,7 +44,7 @@
     "ironing_type": "no ironing",
     "layer_height": "0.12",
     "reduce_infill_retraction": "1",
-    "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
     "detect_overhang_wall": "1",
     "overhang_1_4_speed": "0",
     "overhang_2_4_speed": "20",

resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V2.json

@@ -44,7 +44,7 @@
     "ironing_type": "no ironing",
     "layer_height": "0.12",
     "reduce_infill_retraction": "1",
-    "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
     "detect_overhang_wall": "1",
     "overhang_1_4_speed": "0",
     "overhang_2_4_speed": "20",

resources/profiles/Creality/process/0.12mm Fine @Creality Ender5Pro (2019).json

@@ -44,7 +44,7 @@
     "ironing_type": "no ironing",
     "layer_height": "0.12",
     "reduce_infill_retraction": "1",
-    "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
     "detect_overhang_wall": "1",
     "overhang_1_4_speed": "0",
     "overhang_2_4_speed": "20",

resources/profiles/Creality/process/0.15mm Optimal @Creality CR10Max.json

@@ -44,7 +44,7 @@
     "ironing_type": "no ironing",
     "layer_height": "0.15",
     "reduce_infill_retraction": "1",
-    "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
     "detect_overhang_wall": "1",
     "overhang_1_4_speed": "0",
     "overhang_2_4_speed": "20",

resources/profiles/Creality/process/0.15mm Optimal @Creality Ender3V2.json

@@ -44,7 +44,7 @@
     "ironing_type": "no ironing",
     "layer_height": "0.15",
     "reduce_infill_retraction": "1",
-    "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
     "detect_overhang_wall": "1",
     "overhang_1_4_speed": "0",
     "overhang_2_4_speed": "20",