update WIKI

fix Prusa MK3S and Mini profile issues
Fixed #2768
2026-05-18 02:52:10 +00:00 · 2023-11-17 20:00:12 +08:00 · 2023-11-17 20:00:05 +08:00 · 2023-11-17 19:40:03 +08:00 · 2023-11-17 14:28:48 +08:00 · 2023-11-17 08:01:52 +08:00
389 changed files with 12904 additions and 10162 deletions
--- a/.github/workflows/build_orca.yml
+++ b/.github/workflows/build_orca.yml
@@ -224,6 +224,13 @@ jobs:
        with:
          name: OrcaSlicer_Windows_V${{ env.ver }}
          path: ${{ github.workspace }}/build/OrcaSlicer*.exe
+
+      - name: Upload artifacts Win PDB
+        if: matrix.os == 'windows-latest'
+        uses: actions/upload-artifact@v3
+        with:
+          name: OrcaSlicer_Windows_V${{ env.ver }}_pdb
+          path: ${{ github.workspace }}/build/src/Release/*.pdb
 # Ubuntu

      - name: Install dependencies
--- a/.github/workflows/orca_bot.yml
+++ b/.github/workflows/orca_bot.yml
@@ -0,0 +1,26 @@
+name: Orca bot
+on:
+  schedule:
+    - cron: "0 0 * * *"
+
+jobs:
+  close-issues:
+    runs-on: ubuntu-latest
+    permissions:
+      issues: write
+      pull-requests: write
+    steps:
+      - uses: actions/stale@v5
+        with:
+          days-before-issue-stale: 90
+          days-before-issue-close: 14
+          operations-per-run: 1000
+          stale-issue-label: "stale"
+          ascending: true
+          stale-issue-message: "GitHub bot: this issue is stale because it has been open for 90 days with no activity."
+          close-issue-message: "GitHub bot: This issue was closed because it has been inactive for 14 days since being marked as stale."
+          days-before-pr-stale: -1
+          days-before-pr-close: -1
+          remove-issue-stale-when-updated: true
+          remove-pr-stale-when-updated: true 
+          repo-token: ${{ secrets.GITHUB_TOKEN }}
--- a/doc/Auxiliary-fan.md
+++ b/doc/Auxiliary-fan.md
@@ -1 +1,35 @@
-WIP
+OrcaSlicer use `M106 P2` command to control auxiliary cooling fan.
+
+If you are using Klipper, you can define a `M106` macro to control the both normal part cooling fan and auxiliary fan and exhuast fan.  
+Below is a reference configuration for Klipper.   
+*Note: Don't forget to change the pin name to the actual pin name you are using in the configuration*
+
+```
+# instead of using [fan], we define the default part cooling fan with [fan_generic] here
+# this is the default part cooling fan
+[fan_generic fan0]
+pin: PA7
+cycle_time: 0.01
+hardware_pwm: false
+
+# this is the auxiliary fan
+# comment out it if you don't have auxiliary fan
+[fan_generic fan2]
+pin: PA8
+cycle_time: 0.01
+hardware_pwm: false
+
+# this is the exhaust fan
+# comment out it if you don't have exhaust fan
+[fan_generic fan3]
+pin: PA9
+cycle_time: 0.01
+hardware_pwm: false
+
+[gcode_macro M106]
+gcode:
+    {% set fan = 'fan' + (params.P|int if params.P is defined else 0)|string %}
+    {% set speed = (params.S|int if params.S is defined else 255) %}
+    SET_FAN_SPEED FAN={fan} SPEED={speed}
+
+```
--- a/doc/Chamber-temperature.md
+++ b/doc/Chamber-temperature.md
@@ -1 +1,52 @@
-WIP...
+OrcaSlicer use `M141/M191` command to control active chamber heater.  
+
+If `Activate temperature control` is checked, OrcaSlicer will insert `M191` command at the beginning of the gcode(before `Machine G-code`).  
+![image](./images/activate_chamber_heater.jpg)  
+*Note: If the machine is equipped with an auxiliary fan, OrcaSlicer will automatically activate the fan during the heating period to help circulate air in the chamber.*  
+
+
+There are two chamber temperature variables available that we can use in `Machine G-code` to control the chamber temperature, if you prefer:  
+To access the chamber temperature set in the first filament, use:  
+`M191 S{chamber_temperature[0]}`  
+To use the overall chamber temperature, which is the highest chamber temperature set across all filaments, use:    
+`M191 S{overall_chamber_temperature}`
+
+
+--------------------------Klipper--------------------------  
+If you are using Klipper, you can define these macros to control the active chamber heater.  
+Bellow is a reference configuration for Klipper.   
+*Note: Don't forget to change the pin name/values to the actual values you are using in the configuration*
+
+```
+[heater_generic chamber_heater]
+heater_pin:PB10
+max_power:1.0
+# Orca note: here the temperature sensor should be the sensor you are using for chamber temperature, not the PTC sensor
+sensor_type:NTC 100K MGB18-104F39050L32
+sensor_pin:PA1
+control = pid
+pid_Kp = 63.418 
+pid_ki = 0.960
+pid_kd = 1244.716
+min_temp:0
+max_temp:70
+
+[gcode_macro M141]
+gcode:
+    SET_HEATER_TEMPERATURE HEATER=chamber_heater TARGET={params.S|default(0)}
+
+[gcode_macro M191]
+gcode:
+    {% set s = params.S|float %}
+    {% if s == 0 %}
+        # If target temperature is 0, do nothing
+        M117 Chamber heating cancelled
+    {% else %}
+        SET_HEATER_TEMPERATURE HEATER=chamber_heater TARGET={s}
+        # Orca: uncomment the following line if you want to use heat bed to assist chamber heating
+        # M140 S100
+        TEMPERATURE_WAIT SENSOR="heater_generic chamber_heater" MINIMUM={s-1} MAXIMUM={s+1}
+        M117 Chamber at target temperature
+    {% endif %}
+
+```
--- a/doc/air-filtration.md
+++ b/doc/air-filtration.md
@@ -1 +1,35 @@
-WIP
+OrcaSlicer use `M106 P3` command to control air-filtration/exhuast fan.
+
+If you are using Klipper, you can define a `M106` macro to control the both normal part cooling fan and auxiliary fan and exhuast fan.  
+Below is a reference configuration for Klipper.   
+*Note: Don't forget to change the pin name to the actual pin name you are using in the configuration*
+
+```
+# instead of using [fan], we define the default part cooling fan with [fan_generic] here
+# this is the default part cooling fan
+[fan_generic fan0]
+pin: PA7
+cycle_time: 0.01
+hardware_pwm: false
+
+# this is the auxiliary fan
+# comment out it if you don't have auxiliary fan
+[fan_generic fan2]
+pin: PA8
+cycle_time: 0.01
+hardware_pwm: false
+
+# this is the exhaust fan
+# comment out it if you don't have exhaust fan
+[fan_generic fan3]
+pin: PA9
+cycle_time: 0.01
+hardware_pwm: false
+
+[gcode_macro M106]
+gcode:
+    {% set fan = 'fan' + (params.P|int if params.P is defined else 0)|string %}
+    {% set speed = (params.S|int if params.S is defined else 255) %}
+    SET_FAN_SPEED FAN={fan} SPEED={speed}
+
+```
--- a/doc/images/activate_chamber_heater.jpg
+++ b/doc/images/activate_chamber_heater.jpg
--- a/localization/i18n/OrcaSlicer.pot
+++ b/localization/i18n/OrcaSlicer.pot
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-11-04 14:18+0800\n"
+"POT-Creation-Date: 2023-11-10 14:54+0800\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -489,27 +489,12 @@ msgstr ""
 msgid "Remove selection"
 msgstr ""

-msgid "Shift + Mouse move up or dowm"
-msgstr ""
-
-msgid "Rotate text"
-msgstr ""
-
-msgid "Text shape"
-msgstr ""
-
 msgid "Font"
 msgstr ""

 msgid "Thickness"
 msgstr ""

-msgid "Input text"
-msgstr ""
-
-msgid "Embeded"
-msgstr ""
-
 msgid "Text Gap"
 msgstr ""

@@ -521,12 +506,24 @@ msgid ""
 "depth"
 msgstr ""

+msgid "Input text"
+msgstr ""
+
 msgid "Surface"
 msgstr ""

 msgid "Horizontal text"
 msgstr ""

+msgid "Shift + Mouse move up or dowm"
+msgstr ""
+
+msgid "Rotate text"
+msgstr ""
+
+msgid "Text shape"
+msgstr ""
+
 msgid "Ctrl+"
 msgstr ""

@@ -608,11 +605,6 @@ msgstr ""
 msgid "WebView2 Runtime"
 msgstr ""

-msgid ""
-"OrcaSlicer configuration file may be corrupted and is not abled to be parsed."
-"Please delete the file and try again."
-msgstr ""
-
 #, possible-c-format, possible-boost-format
 msgid ""
 "%s\n"
@@ -638,6 +630,13 @@ msgstr ""
 msgid "Info"
 msgstr ""

+msgid ""
+"The OrcaSlicer configuration file may be corrupted and cannot be parsed.\n"
+"OrcaSlicer has attempted to recreate the configuration file.\n"
+"Please note, application settings will be lost, but printer profiles will "
+"not be affected."
+msgstr ""
+
 msgid "Rebuild"
 msgstr ""

@@ -5769,6 +5768,9 @@ msgstr ""
 msgid "Change filament G-code"
 msgstr ""

+msgid "Change extrusion role G-code"
+msgstr ""
+
 msgid "Pause G-code"
 msgstr ""

@@ -7408,6 +7410,14 @@ msgstr ""
 msgid "End G-code when finish the printing of this filament"
 msgstr ""

+msgid "Ensure vertical shell thickness"
+msgstr ""
+
+msgid ""
+"Add solid infill near sloping surfaces to guarantee the vertical shell "
+"thickness (top+bottom solid layers)"
+msgstr ""
+
 msgid "Top surface pattern"
 msgstr ""

@@ -9432,6 +9442,9 @@ msgid ""
 "tool change"
 msgstr ""

+msgid "This gcode is inserted when the extrusion role is changed"
+msgstr ""
+
 msgid ""
 "Line width for top surfaces. If expressed as a %, it will be computed over "
 "the nozzle diameter."
@@ -9727,6 +9740,15 @@ msgid ""
 "itself. It's expressed as a percentage over nozzle diameter"
 msgstr ""

+msgid "Detect narrow internal solid infill"
+msgstr ""
+
+msgid ""
+"This option will auto detect narrow internal solid infill area. If enabled, "
+"concentric pattern will be used for the area to speed printing up. "
+"Otherwise, rectilinear pattern is used defaultly."
+msgstr ""
+
 msgid "invalid value "
 msgstr ""

--- a/localization/i18n/cs/OrcaSlicer_cs.po
+++ b/localization/i18n/cs/OrcaSlicer_cs.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-11-04 14:18+0800\n"
+"POT-Creation-Date: 2023-11-10 14:54+0800\n"
 "PO-Revision-Date: 2023-09-30 15:15+0200\n"
 "Last-Translator: René Mošner <Renemosner@seznam.cz>\n"
 "Language-Team: \n"
@@ -497,27 +497,12 @@ msgstr "Malování pozice švu"
 msgid "Remove selection"
 msgstr "Odebrat výběr"

-msgid "Shift + Mouse move up or dowm"
-msgstr "Shift + pohyb myši nahoru nebo dolů"
-
-msgid "Rotate text"
-msgstr "Otočit text"
-
-msgid "Text shape"
-msgstr "Tvar textu"
-
 msgid "Font"
 msgstr "Písmo"

 msgid "Thickness"
 msgstr "Tloušťka"

-msgid "Input text"
-msgstr "Vložit text"
-
-msgid "Embeded"
-msgstr "Vloženo"
-
 msgid "Text Gap"
 msgstr "Mezera v textu"

@@ -531,12 +516,24 @@ msgstr ""
 "Vloženo\n"
 "hloubka"

+msgid "Input text"
+msgstr "Vložit text"
+
 msgid "Surface"
 msgstr "Povrch"

 msgid "Horizontal text"
 msgstr "Vodorovný text"

+msgid "Shift + Mouse move up or dowm"
+msgstr "Shift + pohyb myši nahoru nebo dolů"
+
+msgid "Rotate text"
+msgstr "Otočit text"
+
+msgid "Text shape"
+msgstr "Tvar textu"
+
 msgid "Ctrl+"
 msgstr "Ctrl+"

@@ -628,13 +625,6 @@ msgstr ""
 msgid "WebView2 Runtime"
 msgstr "WebView2 Runtime"

-msgid ""
-"OrcaSlicer configuration file may be corrupted and is not abled to be parsed."
-"Please delete the file and try again."
-msgstr ""
-"Konfigurační soubor OrcaSlicer může být poškozen a nelze jej analyzovat."
-"Smažte soubor a zkuste to znovu."
-
 #, c-format, boost-format
 msgid ""
 "%s\n"
@@ -662,6 +652,17 @@ msgstr "Toto je nejnovější verze."
 msgid "Info"
 msgstr "Info"

+msgid ""
+"The OrcaSlicer configuration file may be corrupted and cannot be parsed.\n"
+"OrcaSlicer has attempted to recreate the configuration file.\n"
+"Please note, application settings will be lost, but printer profiles will "
+"not be affected."
+msgstr ""
+"Soubor konfigurace programu OrcaSlicer může být poškozen a nelze ho analyzovat.\n"
+"OrcaSlicer se pokusil znovu vytvořit konfigurační soubor.\n"
+"Všimněte si, že nastavení aplikace bude ztraceno, ale profily tiskárny "
+"nebudou ovlivněny."
+
 msgid "Rebuild"
 msgstr "Obnovit"

@@ -1787,10 +1788,10 @@ msgid "An SD card needs to be inserted before printing via LAN."
 msgstr "Před tiskem přes LAN je třeba vložit SD kartu."

 msgid "Sending gcode file over LAN"
-msgstr "Odesílání souboru gcode přes LAN"
+msgstr "Odesílání souboru gkód přes LAN"

 msgid "Sending gcode file to sdcard"
-msgstr "Odesílání souboru gcode na sdcard"
+msgstr "Odesílání souboru gkód na sd kartu"

 #, c-format, boost-format
 msgid "Successfully sent. Close current page in %s s"
@@ -2181,7 +2182,7 @@ msgid ""
 "(Currently supporting automatic supply of consumables with the same brand, "
 "material type, and color)"
 msgstr ""
-"Pokud v AMS existují dva identické filameny, bude povolena záloha AMS "
+"Pokud v AMS existují dva identické filamenty, bude povolena záloha AMS "
 "filamentu. \n"
 "(Aktuálně podporuje automatické doplňování spotřebního materiálu stejné "
 "značky, typu materiálu a barvy)"
@@ -2333,7 +2334,7 @@ msgid ""
 "Error message: %1%.\n"
 "Source file %2%."
 msgstr ""
-"Soubor gcode se nepodařilo uložit.\n"
+"Soubor gkód se nepodařilo uložit.\n"
 "Chybová zpráva: %1%.\n"
 "Zdrojový soubor %2%."

@@ -2524,7 +2525,7 @@ msgstr ""
 "typ časosběru je tradiční."

 msgid " But machines with I3 structure will not generate timelapse videos."
-msgstr " Ale stroje s I3 strukturou nevytvoří timelapse videa."
+msgstr " Ale stroje s I3 strukturou nevytvářejí časosběrná videa."

 msgid ""
 "Change these settings automatically? \n"
@@ -2645,7 +2646,7 @@ msgid "Calibrating the micro lida"
 msgstr "Kalibrace mikro lida"

 msgid "Calibrating extrusion flow"
-msgstr "Kalibrace extruze průtpku"
+msgstr "Kalibrace extruze průtoku"

 msgid "Paused due to nozzle temperature malfunction"
 msgstr "Pozastaveno kvůli poruše teploty trysky"
@@ -3449,7 +3450,7 @@ msgid "Export current sliced file"
 msgstr "Exportovat aktuální Slicovaný soubor"

 msgid "Export all plate sliced file"
-msgstr "Exportovat všechny soubor slicované na pdložce"
+msgstr "Exportovat všechny soubor slicované na podložce"

 msgid "Export G-code"
 msgstr "Exportovat G-kód"
@@ -4132,7 +4133,7 @@ msgid " upload config prase failed\n"
 msgstr " nahrávání konfigurace se nepodařilo zpracovat\n"

 msgid " No corresponding storage bucket\n"
-msgstr " Žádný odpovídající úložný bucket\n"
+msgstr " Žádný odpovídající úložný prostor\n"

 msgid " can not be opened\n"
 msgstr " nelze otevřít\n"
@@ -4366,7 +4367,7 @@ msgid ""
 "The application cannot run normally because OpenGL version is lower than "
 "2.0.\n"
 msgstr ""
-"Aplikace nemůže běžet normálně, protože máte nižší verzi OpenGLnež 2.0.\n"
+"Aplikace nemůže běžet normálně, protože máte nižší verzi OpenGL než 2.0.\n"

 msgid "Please upgrade your graphics card driver."
 msgstr "Prosím aktualizujte ovladač grafické karty."
@@ -4808,7 +4809,7 @@ msgid ""
 "The loaded file contains gcode only, Can not enter the Prepare page"
 msgstr ""
 "Režim pouze náhled:\n"
-"Načtený soubor obsahuje pouze gcode, nelze vstoupit na stránku Příprava"
+"Načtený soubor obsahuje pouze gkód, nelze vstoupit na stránku Příprava"

 msgid "You can keep the modified presets to the new project or discard them"
 msgstr "Upravené předvolby si můžete ponechat pro nový projekt nebo je zahodit"
@@ -4914,7 +4915,7 @@ msgid "The following characters are not allowed by a FAT file system:"
 msgstr "Následující znaky nejsou v souborovém systému FAT povoleny:"

 msgid "Save Sliced file as:"
-msgstr "Uložit Slicované soubor jako:"
+msgstr "Uložit Slicovaný soubor jako:"

 #, c-format, boost-format
 msgid ""
@@ -4932,7 +4933,7 @@ msgstr ""
 "kladné části."

 msgid "Is the printer ready? Is the print sheet in place, empty and clean?"
-msgstr "Je tiskarna připravená k tisku? Je podložka prázdná a čistá?"
+msgstr "Je tiskárna připravená k tisku? Je podložka prázdná a čistá?"

 msgid "Upload and Print"
 msgstr "Nahrát a Tisknout"
@@ -6204,6 +6205,9 @@ msgstr "Časosběrný G-kód"
 msgid "Change filament G-code"
 msgstr "G-kód Změny filamentu"

+msgid "Change extrusion role G-code"
+msgstr "Změnit G-kód pro úlohu extruze"
+
 msgid "Pause G-code"
 msgstr "G-kód Pauzy"

@@ -6226,7 +6230,7 @@ msgid "Jerk limitation"
 msgstr "Omezení Jerk-Ryv"

 msgid "Single extruder multimaterial setup"
-msgstr "Nastavení multimaterialu s jedním extruderem"
+msgstr "Nastavení multimateriálu s jedním extruderem"

 msgid "Wipe tower"
 msgstr "Čistící věž"
@@ -6558,7 +6562,7 @@ msgid "Login"
 msgstr "Přihlášení"

 msgid "The configuration package is changed in previous Config Guide"
-msgstr "Konfigurační balíček byl změněn v předchozím Config Guide"
+msgstr "Konfigurační balíček byl změněn v předchozím průvodci konfigurací"

 msgid "Configuration package changed"
 msgstr "Konfigurační balíček změněn"
@@ -8059,6 +8063,16 @@ msgstr "Konec G-kód po dokončení celého tisku"
 msgid "End G-code when finish the printing of this filament"
 msgstr "Konec G-kód po dokončení tisku tohoto filamentu"

+msgid "Ensure vertical shell thickness"
+msgstr "Zajistit tloušťku svislých stěn"
+
+msgid ""
+"Add solid infill near sloping surfaces to guarantee the vertical shell "
+"thickness (top+bottom solid layers)"
+msgstr ""
+"Přidá plnou výplň u šikmých ploch pro garanci tloušťky svislých stěn "
+"(vrchních a spodních plných vrstev)"
+
 msgid "Top surface pattern"
 msgstr "Vzor horního povrchu"

@@ -8211,7 +8225,7 @@ msgid ""
 msgstr ""
 "Materiál může mít objemovou změnu po přepnutí mezi roztaveným a krystalickým "
 "stavem. Toto nastavení proporcionálně změní veškerý vytlačovací tok tohoto "
-"filamentu v gcode. Doporučený rozsah hodnot je mezi 0,95 a 1,05. Možná "
+"filamentu v gkódu. Doporučený rozsah hodnot je mezi 0,95 a 1,05. Možná "
 "můžete tuto hodnotu vyladit, abyste získali pěkně rovný povrch, když dochází "
 "k mírnému přetečení nebo podtečení"

@@ -8313,7 +8327,7 @@ msgid ""
 "Filament diameter is used to calculate extrusion in gcode, so it's important "
 "and should be accurate"
 msgstr ""
-"Průměr filamentu se používá k výpočtu vytlačování v gcode, takže je důležitý "
+"Průměr filamentu se používá k výpočtu extruze v gkódu, takže je důležitý "
 "a měl by být přesný"

 msgid "Shrinkage"
@@ -8327,7 +8341,7 @@ msgid ""
 "Be sure to allow enough space between objects, as this compensation is done "
 "after the checks."
 msgstr ""
-"Zadejte procento smrštění, které filament získá po ochlazení (94%      pokud "
+"Zadejte procento smrštění, které filament získá po ochlazení (94% i pokud "
 "naměříte 94mm místo 100mm). Část bude pro kompenzaci zmenšena v xy. Bere se "
 "v úvahu pouze filamentu použit pro obvod.\n"
 "Ujistěte se aby byl mezi objekty dostatek prostoru, protože tato kompenzace "
@@ -8421,7 +8435,7 @@ msgid ""
 msgstr ""
 "Doba, po kterou firmware tiskárny (nebo jednotka Multi Material 2.0) zavádí "
 "nový filament během jeho výměny (při provádění kódu T). Tento čas je přidán "
-"k celkové době tisku pomocí G-code odhadovače tiskového času."
+"k celkové době tisku pomocí G-kódu odhadovače tiskového času."

 msgid "Ramming parameters"
 msgstr "Parametry rapidní extruze"
@@ -8440,7 +8454,7 @@ msgid ""
 msgstr ""
 "Doba, po kterou firmware tiskárny (nebo jednotka Multi Material 2.0) vysouvá "
 "filament během jeho výměny (při provádění kódu T). Tento čas je přidán k "
-"celkové době tisku pomocí G-code odhadovače tiskového času."
+"celkové době tisku pomocí G-kódu odhadovače tiskového času."

 msgid "Enable ramming for multitool setups"
 msgstr "Povolení rapidní extruze tiskárny s více nástroji"
@@ -9027,7 +9041,7 @@ msgid "G-code flavor"
 msgstr "Druh G-kódu"

 msgid "What kind of gcode the printer is compatible with"
-msgstr "S jakým typem gcode je tiskárna kompatibilní"
+msgstr "S jakým typem gkódu je tiskárna kompatibilní"

 msgid "Klipper"
 msgstr "Klipper"
@@ -9145,7 +9159,7 @@ msgid ""
 "layer height. Too high value results in overextrusion on the surface"
 msgstr ""
 "Množství materiálu, které se má vytlačit během žehlení. V poměru k průtoku "
-"normální výšky vrstvy. Příliš vysoká hodnota vede k nadměrnému vytlačování "
+"normální výšky vrstvy. Příliš vysoká hodnota vede k nadměrné extruzi "
 "na povrchu"

 msgid "Ironing line spacing"
@@ -9171,7 +9185,7 @@ msgstr ""
 "použije výchozí metodu."

 msgid "This gcode part is inserted at every layer change after lift z"
-msgstr "Tato část gcode je vložena při každé změně vrstvy po zvednutí z"
+msgstr "Tato část gkódu je vložena při každé změně vrstvy po zvednutí z"

 msgid "Supports silent mode"
 msgstr "Podporuje tichý režim"
@@ -9188,7 +9202,7 @@ msgid ""
 "pause G-code in gcode viewer"
 msgstr ""
 "Tento G-kód bude použit jako kód pro pozastavený tisk. Uživatel může vložit "
-"pauzu G-kód do prohlížeče gcode"
+"pauzu G-kód do prohlížeče gkódu"

 msgid "This G-code will be used as a custom code"
 msgstr "Tento G-kód bude použit jako vlastní kód"
@@ -9317,7 +9331,7 @@ msgstr ""
 "maximální výšky vrstvy při povolení adaptivní výšky vrstvy"

 msgid "Extrusion rate smoothing"
-msgstr "Zjemňování extruze"
+msgstr "Vyhlazení rychlosti extruze"

 msgid ""
 "This parameter smooths out sudden extrusion rate changes that happen when "
@@ -9347,32 +9361,30 @@ msgid ""
 "\n"
 "Note: this parameter disables arc fitting."
 msgstr ""
-"Tento parametr zjemňuje náhlé změny extruzního toku, ke kterým dochází při "
-"přechodu tiskárny z tisku s vysokým průtokem (vysokou rychlostí/větší "
-"šířkou) extruze na tisk s nižším průtokem (nižší rychlostí/menší šířkou) "
-"extruze a obráceně.\n"
+"Tato hodnota vyhlazuje náhlé změny extruzní rychlosti, které nastávají, když "
+"tiskárna přechází z extruze s vysokým průtokem (vysoká rychlost/větší šířka) "
+"na extruzi s nižším průtokem (nižší rychlost/menší šířka) a naopak.\n"
 "\n"
-"Definuje maximální rychlost, jakou se může objemový průtok extrudovaný v mm3/"
-"s měnit v čase. Vyšší hodnoty znamenají, že jsou povoleny vyšší změny "
+"Definuje maximální rychlost, kterou může objemový průtok extrudovaného materiálu "
+"v mm3/s měnit v čase. Vyšší hodnoty znamenají, že jsou povoleny větší změny "
 "extruzní rychlosti, což vede k rychlejším přechodům rychlosti.\n"
 "\n"
-"Hodnota 0 tuto funkci vypíná. \n"
+"Hodnota 0 funkci zakáže. \n"
 "\n"
-"Pro tiskárny s vysokou rychlostí a vysokým průtokem přímého pohonu (např. "
-"Bambu lab nebo Voron) tato hodnota obvykle není potřebná. Avšak v některých "
-"případech, kdy se rychlosti prvků velmi liší, může poskytnout marginální "
-"přínos. Například při agresivním zpomalení kvůli přesahům. V těchto "
-"případech se doporučuje vysoká hodnota kolem 300-350 mm3/s2, protože to "
-"umožní právě dostatečné zjemnění pro pomoc předstihu tlaku (PA) k dosažení "
-"plynulejšího přechodu průtoku.\n"
+"Pro tiskárny s přímým pohonem a vysokou rychlostí a průtokem (např. Bambu lab "
+"nebo Voron) tato hodnota obvykle není potřebná. Nicméně v některých případech, "
+"kde se rychlosti funkcí výrazně liší, může poskytnout marginální přínos. "
+"Například při agresivních zpomaleních způsobených přesahy. V těchto případech "
+"se doporučuje vysoká hodnota kolem 300-350 mm3/s2, protože to umožňuje dostatečné "
+"vyhlazení pro pomoc při dosažení plynulejšího přechodu tlaku při extruzi.\n"
 "\n"
-"Pro pomalejší tiskárny bez předstihu tlaku (PA) by měla být hodnota "
-"nastavena mnohem nižší. Pro extrudery s přímým pohonem je dobrým výchozím "
-"bodem hodnota 10-15 mm3/s2 a pro styl Bowden 5-10 mm3/s2. \n"
+"Pro pomalejší tiskárny bez tlakového předstihu by měla být hodnota nastavena "
+"mnohem nižší. Pro přímé pohony je hodnota 10-15 mm3/s2 dobrým výchozím bodem, "
+"a pro styl Bowden 5-10 mm3/s2. \n"
 "\n"
-"Tato funkce je známá jako Pressure Equalizer v Prusa slicer.\n"
+"Tato funkce je známa jako Pressure Equalizer v programu Prusa Slicer.\n"
 "\n"
-"Poznámka: Tento parametr vypíná arc fitting."
+"Poznámka: Tato hodnota zakazuje obloukové přizpůsobení."

 msgid "mm³/s²"
 msgstr "mm³/s²"
@@ -9659,7 +9671,7 @@ msgid ""
 "resolution and more time to slice"
 msgstr ""
 "Cesta G-kódu se generuje po zjednodušení obrysu modelu, aby se předešlo "
-"příliš velkému počtu bodů a Linek gcode v souboru gcode. Menší hodnota "
+"příliš velkému počtu bodů a Linek gkódu v souboru gkód. Menší hodnota "
 "znamená vyšší rozlišení a více času na slicování"

 msgid "Travel distance threshold"
@@ -9670,7 +9682,7 @@ msgid ""
 "threshold"
 msgstr ""
 "Spusťte retrakci pouze tehdy, když je dráha jízdy delší než tato hraniční "
-"hohnota"
+"hodnota"

 msgid "Retract amount before wipe"
 msgstr "Délka retrakce před očištěním"
@@ -9827,7 +9839,7 @@ msgid "Random"
 msgstr "Náhodný"

 msgid "Staggered inner seams"
-msgstr "Posunuté vnitřní švy"
+msgstr "Odstupňované vnitřní švy"

 msgid ""
 "This option causes the inner seams to be shifted backwards based on their "
@@ -9858,9 +9870,9 @@ msgid ""
 "if a wipe action is executed immediately following an outer wall extrusion, "
 "the speed of the outer wall extrusion will be utilized for the wipe action."
 msgstr ""
-"Rychlost čištění je určena rychlostí aktuální role vytlačování, např. pokud "
-"je činnost čištění provedena bezprostředně po vytlačování vnější stěny, "
-"rychlost vytlačování vnější stěny bude využita pro činnost čištění."
+"Rychlost čištění je určena rychlostí aktuální role extruze, např. pokud "
+"je činnost čištění provedena bezprostředně po extruzi vnější stěny, "
+"rychlost extruze vnější stěny bude využita pro činnost čištění."

 msgid "Wipe on loops"
 msgstr "Čistit na smyčce"
@@ -9869,7 +9881,7 @@ msgid ""
 "To minimize the visibility of the seam in a closed loop extrusion, a small "
 "inward movement is executed before the extruder leaves the loop."
 msgstr ""
-"Aby byla minimalizována viditelnost švu při vytlačování s uzavřenou smyčkou, "
+"Aby byla minimalizována viditelnost švu při extruzi s uzavřenou smyčkou, "
 "je proveden malý pohyb dovnitř předtím, než vytlačovací stroj opustí smyčku."

 msgid "Wipe speed"
@@ -9915,7 +9927,7 @@ msgid ""
 "The printing speed in exported gcode will be slowed down, when the estimated "
 "layer time is shorter than this value, to get better cooling for these layers"
 msgstr ""
-"Rychlost tisku v exportovaném kódu gcode se zpomalí, když je odhadovaná doba "
+"Rychlost tisku v exportovaném kódu gkód se zpomalí, když je odhadovaná doba "
 "vrstvy kratší než tato hodnota, aby se dosáhlo lepšího chlazení pro tyto "
 "vrstvy"

@@ -10079,7 +10091,7 @@ msgid ""
 "print bed, set this to -0.3 (or fix your endstop)."
 msgstr ""
 "Tato hodnota bude přidána (nebo odečtena) ze všech souřadnic Z ve výstupním "
-"G-code. Používá se ke kompenzování špatné pozice endstopu Z. Například pokud "
+"G-kódu. Používá se ke kompenzování špatné pozice endstopu Z. Například pokud "
 "endstop 0 skutečně ponechá trysku 0,3 mm daleko od tiskové podložky, "
 "nastavte hodnotu -0,3 (nebo dolaďte svůj koncový doraz)."

@@ -10273,7 +10285,7 @@ msgstr ""
 "ušetří materiál a sníží poškození objektu.\n"
 "Pro stromovou podpěru, tenký a organický styl bude agresivněji slučovat "
 "větve a ušetří mnoho materiálu (výchozí organický), zatímco hybridní styl "
-"vytvoří podobnou strukturu jako běžná podpěra pod velkými plochými převiy."
+"vytvoří podobnou strukturu jako běžná podpěra pod velkými plochými převisy."

 msgid "Snug"
 msgstr "Přiléhavý"
@@ -10380,7 +10392,7 @@ msgstr ""
 "automaticky vypočítány"

 msgid "Tree support brim width"
-msgstr "Šířka Limce podpěr stromů"
+msgstr "Šířka Límce podpěr stromů"

 msgid "Distance from tree branch to the outermost brim line"
 msgstr "Vzdálenost od větve stromu k nejvzdálenější linii Límce"
@@ -10396,7 +10408,7 @@ msgid "Tree support branch diameter"
 msgstr "Průměr větve podpěr stromů"

 msgid "This setting determines the initial diameter of support nodes."
-msgstr "Toto nastavení určuje počáteční průměr uzlů poděry."
+msgstr "Toto nastavení určuje počáteční průměr uzlů podpěr."

 #. TRN PrintSettings: #lmFIXME
 msgid "Branch Diameter Angle"
@@ -10491,9 +10503,12 @@ msgid ""
 "This gcode is inserted when change filament, including T command to trigger "
 "tool change"
 msgstr ""
-"Tento gcode se vloží při výměně filamentu, včetně příkazu T ke spuštění "
+"Tento gkód se vloží při výměně filamentu, včetně příkazu T ke spuštění "
 "výměny nástroje"

+msgid "This gcode is inserted when the extrusion role is changed"
+msgstr "Tento G-kód je vložen při změně role extruze"
+
 msgid ""
 "Line width for top surfaces. If expressed as a %, it will be computed over "
 "the nozzle diameter."
@@ -10545,7 +10560,7 @@ msgid ""
 "Move nozzle along the last extrusion path when retracting to clean leaked "
 "material on nozzle. This can minimize blob when print new part after travel"
 msgstr ""
-"Při zasouvání přesuňte trysku podél poslední dráhy vytlačování, abyste "
+"Při retrakci přesuňte trysku podél poslední dráhy extruze, abyste "
 "vyčistili uniklý materiál na trysce. To může minimalizovat skvrny při tisku "
 "nového dílu po cestě"

@@ -10762,9 +10777,9 @@ msgid ""
 "Wipe tower is only compatible with relative mode. It is always enabled on "
 "BambuLab printers. Default is checked"
 msgstr ""
-"Při použití volby \"label_objects\" se doporučuje relativní vytlačování. "
+"Při použití volby \"label_objects\" se doporučuje relativní extruzi. "
 "Některé extrudery fungují lépe, když je tato možnost odškrtnuta (režim "
-"absolutního vytlačování). Čistící věž je kompatibilní pouze s relativním "
+"absolutní extruze). Čistící věž je kompatibilní pouze s relativním "
 "režimem. Na tiskárnách BambuLab je vždy povolen. Výchozí je zaškrtnuto"

 msgid ""
@@ -10795,7 +10810,7 @@ msgstr ""
 "Vyjadřuje se jako procento průměru trysky"

 msgid "Wall transitioning filter margin"
-msgstr "Okraj filtru přechodu stěny"
+msgstr "Filtr přechodového rozpětí stěny"

 msgid ""
 "Prevent transitioning back and forth between one extra wall and one less. "
@@ -10830,7 +10845,7 @@ msgstr ""
 "mezery nebo přečnívat"

 msgid "Wall distribution count"
-msgstr "Počet rozložení stěn"
+msgstr "Počet ovlivněných stěn"

 msgid ""
 "The number of walls, counted from the center, over which the variation needs "
@@ -10879,6 +10894,18 @@ msgstr ""
 "stejně tlustá jako prvek samotný. Vyjadřuje se jako procento nad průměr "
 "trysky"

+msgid "Detect narrow internal solid infill"
+msgstr "Detekovat úzkou vnitřní plnou výplň"
+
+msgid ""
+"This option will auto detect narrow internal solid infill area. If enabled, "
+"concentric pattern will be used for the area to speed printing up. "
+"Otherwise, rectilinear pattern is used defaultly."
+msgstr ""
+"Tato možnost automaticky rozpozná úzkou vnitřní plnou výplňovou oblast. Je-"
+"li povolena, bude pro oblast použit soustředný vzor, aby se urychlil tisk. V "
+"opačném případě se ve výchozím nastavení použije přímočarý vzor."
+
 msgid "invalid value "
 msgstr "neplatná hodnota "

@@ -10935,7 +10962,7 @@ msgid "Update the configs values of 3mf to latest."
 msgstr "Aktualizujte konfigurační hodnoty 3mf na nejnovější."

 msgid "Load default filaments"
-msgstr "Načíst výchozí filameny"
+msgstr "Načíst výchozí filamenty"

 msgid "Load first filament as default for those not loaded"
 msgstr "Načíst první filament jako výchozí pro ty, které nebyly načteny"
@@ -11377,7 +11404,7 @@ msgid ""
 "3. If the max volumetric speed or print temperature is changed in the "
 "filament setting."
 msgstr ""
-"Nyní jsme přidali automatickou kalibraci pro různé filameny, která je plně "
+"Nyní jsme přidali automatickou kalibraci pro různé filamenty, která je plně "
 "automatizovaná a výsledek bude uložen do tiskárny pro budoucí použití. "
 "Kalibraci musíte provést pouze v následujících omezených případech:\n"
 "1. Pokud použijete nový filament jiné značky/modelu nebo je filament vlhký;\n"
@@ -11725,7 +11752,7 @@ msgid "Success to get history result"
 msgstr "Úspěšně načtený historický výsledek kalibrace dynamiky průtoku"

 msgid "Refreshing the historical Flow Dynamics Calibration records"
-msgstr "Aktualizace historických záznamů kalibrace dynamiky průtpku probíhá"
+msgstr "Aktualizace historických záznamů kalibrace dynamiky průtoku probíhá"

 msgid "Action"
 msgstr "Akce"
@@ -11746,7 +11773,7 @@ msgid "Service name"
 msgstr "Název služby"

 msgid "OctoPrint version"
-msgstr "Service name"
+msgstr "Verze OctoPrintu"

 msgid "Searching for devices"
 msgstr "Vyhledávání zařízení"
@@ -12346,6 +12373,16 @@ msgstr ""
 "při tisku filamentu s nižší teplotou a vyšší teplotě uzavřeného prostoru. "
 "Další informace naleznete ve Wiki."

+#~ msgid "Embeded"
+#~ msgstr "Vloženo"
+
+#~ msgid ""
+#~ "OrcaSlicer configuration file may be corrupted and is not abled to be "
+#~ "parsed.Please delete the file and try again."
+#~ msgstr ""
+#~ "Konfigurační soubor OrcaSlicer může být poškozen a nelze jej analyzovat."
+#~ "Smažte soubor a zkuste to znovu."
+
 #~ msgid "Online Models"
 #~ msgstr "Online modely"

@@ -12396,16 +12433,6 @@ msgstr ""
 #~ "Teplota podložky překračuje teplotu vitrifikace filamentu. Prosím. Před "
 #~ "tiskem otevřete přední dvířka tiskárny, aby nedošlo k ucpání trysky."

-#~ msgid "Ensure vertical shell thickness"
-#~ msgstr "Zajistit tloušťku svislých stěn"
-
-#~ msgid ""
-#~ "Add solid infill near sloping surfaces to guarantee the vertical shell "
-#~ "thickness (top+bottom solid layers)"
-#~ msgstr ""
-#~ "Přidá plnou výplň u šikmých ploch pro garanci tloušťky svislých stěn "
-#~ "(vrchních a spodních plných vrstev)"
-
 #~ msgid "Temperature of vitrificaiton"
 #~ msgstr "Teplota vitrifikace"

@@ -12436,18 +12463,6 @@ msgstr ""
 #~ "touto rychlostí během tisku kromě prvních několika vrstev, které nejsou "
 #~ "definovány žádnými chladicími vrstvami"

-#~ msgid "Detect narrow internal solid infill"
-#~ msgstr "Detekovat úzkou vnitřní plnou výplň"
-
-#~ msgid ""
-#~ "This option will auto detect narrow internal solid infill area. If "
-#~ "enabled, concentric pattern will be used for the area to speed printing "
-#~ "up. Otherwise, rectilinear pattern is used defaultly."
-#~ msgstr ""
-#~ "Tato možnost automaticky rozpozná úzkou vnitřní plnou výplňovou oblast. "
-#~ "Je-li povolena, bude pro oblast použit soustředný vzor, aby se urychlil "
-#~ "tisk. V opačném případě se ve výchozím nastavení použije přímočarý vzor."
-
 #~ msgid ""
 #~ "Filter out gaps smaller than the threshold specified. This setting won't "
 #~ "affect top/bottom layers"
--- a/localization/i18n/de/OrcaSlicer_de.po
+++ b/localization/i18n/de/OrcaSlicer_de.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-11-04 14:18+0800\n"
+"POT-Creation-Date: 2023-11-10 11:25+0100\n"
 "PO-Revision-Date: \n"
 "Last-Translator: Heiko Liebscher <hliebschergmail.com>\n"
 "Language-Team: \n"
@@ -148,7 +148,7 @@ msgid "Bucket fill"
 msgstr "Flächenfüllung"

 msgid "Height range"
-msgstr "Höhenreichweite"
+msgstr "Höhenbereich"

 msgid "Ctrl + Shift + Enter"
 msgstr "Strg + Umschalt + Eingabetaste"
@@ -163,7 +163,7 @@ msgid "Triangle"
 msgstr "Dreieck"

 msgid "Height Range"
-msgstr "Höhenreichweite"
+msgstr "Höhenbereich"

 msgid "Vertical"
 msgstr "Vertikal"
@@ -494,27 +494,12 @@ msgstr "Naht aufmalen"
 msgid "Remove selection"
 msgstr "Auswahl entfernen"

-msgid "Shift + Mouse move up or dowm"
-msgstr "Umschalttaste + Mausbewegung nach oben oder unten"
-
-msgid "Rotate text"
-msgstr "Text drehen"
-
-msgid "Text shape"
-msgstr "Text zufügen"
-
 msgid "Font"
 msgstr "Schiftart"

 msgid "Thickness"
 msgstr "Dicke"

-msgid "Input text"
-msgstr "Text eingeben"
-
-msgid "Embeded"
-msgstr "Eingebettet"
-
 msgid "Text Gap"
 msgstr "Textabstand"

@@ -528,12 +513,24 @@ msgstr ""
 "Eingebettete\n"
 "Tiefe"

+msgid "Input text"
+msgstr "Text eingeben"
+
 msgid "Surface"
 msgstr "Oberfläche"

 msgid "Horizontal text"
 msgstr "Horizontaler Text"

+msgid "Shift + Mouse move up or dowm"
+msgstr "Umschalttaste + Mausbewegung nach oben oder unten"
+
+msgid "Rotate text"
+msgstr "Text drehen"
+
+msgid "Text shape"
+msgstr "Text zufügen"
+
 msgid "Ctrl+"
 msgstr "Strg +"

@@ -627,14 +624,6 @@ msgstr ""
 msgid "WebView2 Runtime"
 msgstr "WebView2-Runtime"

-msgid ""
-"OrcaSlicer configuration file may be corrupted and is not abled to be parsed."
-"Please delete the file and try again."
-msgstr ""
-"Die OrcaSlicer-Konfigurationsdatei ist möglicherweise beschädigt und kann "
-"nicht geladen werden. Bitte löschen Sie die Datei und versuchen Sie es "
-"erneut."
-
 #, c-format, boost-format
 msgid ""
 "%s\n"
@@ -664,6 +653,18 @@ msgstr "Dies ist die neueste Version."
 msgid "Info"
 msgstr "Info"

+msgid ""
+"The OrcaSlicer configuration file may be corrupted and cannot be parsed.\n"
+"OrcaSlicer has attempted to recreate the configuration file.\n"
+"Please note, application settings will be lost, but printer profiles will "
+"not be affected."
+msgstr ""
+"Die OrcaSlicer-Konfigurationsdatei ist möglicherweise beschädigt und kann "
+"nicht analysiert werden.\n"
+"OrcaSlicer hat versucht, die Konfigurationsdatei neu zu erstellen.\n"
+"Bitte beachten Sie, dass die Anwendungseinstellungen verloren gehen, die "
+"Druckerprofile jedoch nicht betroffen sind."
+
 msgid "Rebuild"
 msgstr "Wiederaufbau"

@@ -3222,7 +3223,7 @@ msgstr "Volumen:"
 msgid "Size:"
 msgstr "Größe:"

-#, c-format, boost-format
+#, boost-format
 msgid ""
 "Conflicts of gcode paths have been found at layer %d, z = %.2lf mm. Please "
 "separate the conflicted objects farther (%s <-> %s)."
@@ -6063,13 +6064,13 @@ msgstr ""
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add Primitive"
-"\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add "
+"Primitive\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "Wenn Sie einen Zeitraffer ohne Werkzeugkopf aufnehmen, wird empfohlen, einen "
 "\"Timelapse Wischturm\" hinzuzufügen, indem Sie mit der rechten Maustaste "
-"auf die leere Position der Bauplatte klicken und \"Primitiv hinzufügen\"->"
-"\"Timelapse Wischturm\" wählen."
+"auf die leere Position der Bauplatte klicken und \"Primitiv hinzufügen\"-"
+">\"Timelapse Wischturm\" wählen."

 msgid "Line width"
 msgstr "Breite der Linie"
@@ -6352,6 +6353,9 @@ msgstr "Zeitraffer G-Code"
 msgid "Change filament G-code"
 msgstr "Filamentwechsel G-Code"

+msgid "Change extrusion role G-code"
+msgstr "Ändere den G-Code der Extrusionsart"
+
 msgid "Pause G-code"
 msgstr "Pausen G-Code"

@@ -8267,6 +8271,16 @@ msgstr "End G-Code nach dem fertigstellen des Drucks hinzufügen."
 msgid "End G-code when finish the printing of this filament"
 msgstr "End-G-Code hinzufügen, wenn der Druck dieses Filaments beenden ist."

+msgid "Ensure vertical shell thickness"
+msgstr "Sicherstellung der vertikalen Wanddicke"
+
+msgid ""
+"Add solid infill near sloping surfaces to guarantee the vertical shell "
+"thickness (top+bottom solid layers)"
+msgstr ""
+"In der Nähe von schrägen Flächen massive Füllungen hinzufügen, um die "
+"vertikale Wanddicke zu gewährleisten (obere + untere massive Schichten)."
+
 msgid "Top surface pattern"
 msgstr "Muster der Oberfläche"

@@ -9017,13 +9031,13 @@ msgstr "Volle Lüfterdrehzahl ab Schicht"

 msgid ""
 "Fan speed will be ramped up linearly from zero at layer "
-"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
-"\". \"full_fan_speed_layer\" will be ignored if lower than "
-"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
-"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
+"\"close_fan_the_first_x_layers\" to maximum at layer "
+"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
+"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
+"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
 msgstr ""
-"Die Lüftergeschwindigkeit wird linear von Null bei der Schicht"
-"\"close_fan_the_first_x_layers\" auf das Maximum bei der Schicht "
+"Die Lüftergeschwindigkeit wird linear von Null bei der "
+"Schicht\"close_fan_the_first_x_layers\" auf das Maximum bei der Schicht "
 "\"full_fan_speed_layer\" erhöht. \"full_fan_speed_layer\" wird ignoriert, "
 "wenn es niedriger ist als \"close_fan_the_first_x_layers\",in diesem Fall "
 "läuft der Lüfter bei Schicht \"close_fan_the_first_x_layers\"+ 1 mit maximal "
@@ -10794,6 +10808,9 @@ msgstr ""
 "Dieser G-Code wird beim Filamentwechsel eingefügt, einschließlich des T-"
 "Befehls zum Auslösen des Werkzeugwechsels"

+msgid "This gcode is inserted when the extrusion role is changed"
+msgstr "Dieser G-Code wird beim Wechsel der Extrusionsart eingefügt"
+
 msgid ""
 "Line width for top surfaces. If expressed as a %, it will be computed over "
 "the nozzle diameter."
@@ -11194,6 +11211,19 @@ msgstr ""
 "Dicke des Features, wird die Wand so dick wie das Feature selbst. Wird als "
 "Prozentsatz des Düsendurchmessers angegeben."

+msgid "Detect narrow internal solid infill"
+msgstr "Erkennen einer schmalen internen soliden Füllung"
+
+msgid ""
+"This option will auto detect narrow internal solid infill area. If enabled, "
+"concentric pattern will be used for the area to speed printing up. "
+"Otherwise, rectilinear pattern is used defaultly."
+msgstr ""
+"Mit dieser Option wird ein schmaler innerer Füllbereich automatisch erkannt. "
+"Wenn diese Option aktiviert ist, wird ein konzentrisches Muster für den "
+"Bereich verwendet, um den Druck zu beschleunigen. Andernfalls wird "
+"standardmäßig ein geradliniges Muster verwendet."
+
 msgid "invalid value "
 msgstr "Ungültiger Wert"

@@ -12700,6 +12730,17 @@ msgstr ""
 "höherer Gehäusetemperatur verringern. Weitere Informationen dazu finden Sie "
 "in der Wiki."

+#~ msgid "Embeded"
+#~ msgstr "Eingebettet"
+
+#~ msgid ""
+#~ "OrcaSlicer configuration file may be corrupted and is not abled to be "
+#~ "parsed.Please delete the file and try again."
+#~ msgstr ""
+#~ "Die OrcaSlicer-Konfigurationsdatei ist möglicherweise beschädigt und kann "
+#~ "nicht geladen werden. Bitte löschen Sie die Datei und versuchen Sie es "
+#~ "erneut."
+
 #~ msgid "Online Models"
 #~ msgstr "Online-Modelle"

@@ -12757,16 +12798,6 @@ msgstr ""
 #~ msgid "Activate for better air filtration"
 #~ msgstr "Aktivieren Sie die Luftfilterung für eine bessere Luftfiltration"

-#~ msgid "Ensure vertical shell thickness"
-#~ msgstr "Sicherstellung der vertikalen Wanddicke"
-
-#~ msgid ""
-#~ "Add solid infill near sloping surfaces to guarantee the vertical shell "
-#~ "thickness (top+bottom solid layers)"
-#~ msgstr ""
-#~ "In der Nähe von schrägen Flächen massive Füllungen hinzufügen, um die "
-#~ "vertikale Wanddicke zu gewährleisten (obere + untere massive Schichten)."
-
 #~ msgid "Temperature of vitrificaiton"
 #~ msgstr "Verglasungstemperatur"

@@ -12802,19 +12833,6 @@ msgstr ""
 #~ "läuft während des Drucks mit dieser Geschwindigkeit, mit Ausnahme der "
 #~ "ersten Schichten, für die keine Kühlung vorgesehen ist."

-#~ msgid "Detect narrow internal solid infill"
-#~ msgstr "Erkennen einer schmalen internen soliden Füllung"
-
-#~ msgid ""
-#~ "This option will auto detect narrow internal solid infill area. If "
-#~ "enabled, concentric pattern will be used for the area to speed printing "
-#~ "up. Otherwise, rectilinear pattern is used defaultly."
-#~ msgstr ""
-#~ "Mit dieser Option wird ein schmaler innerer Füllbereich automatisch "
-#~ "erkannt. Wenn diese Option aktiviert ist, wird ein konzentrisches Muster "
-#~ "für den Bereich verwendet, um den Druck zu beschleunigen. Andernfalls "
-#~ "wird standardmäßig ein geradliniges Muster verwendet."
-
 #~ msgid ""
 #~ "Filter out gaps smaller than the threshold specified. This setting won't "
 #~ "affect top/bottom layers"
--- a/localization/i18n/en/OrcaSlicer_en.po
+++ b/localization/i18n/en/OrcaSlicer_en.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-11-04 14:18+0800\n"
+"POT-Creation-Date: 2023-11-10 14:54+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -11,7 +11,7 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=2; plural=(n==1) ? 0 : 1;\n"
-"X-Generator: Poedit 3.3.2\n"
+"X-Generator: Poedit 3.4.1\n"

 msgid "Supports Painting"
 msgstr "Support Painting"
@@ -491,27 +491,12 @@ msgstr "Seam painting"
 msgid "Remove selection"
 msgstr "Remove selection"

-msgid "Shift + Mouse move up or dowm"
-msgstr "Shift + Mouse move up or dowm"
-
-msgid "Rotate text"
-msgstr "Rotate text"
-
-msgid "Text shape"
-msgstr "Text shape"
-
 msgid "Font"
 msgstr "Font"

 msgid "Thickness"
 msgstr "Thickness"

-msgid "Input text"
-msgstr "Input text"
-
-msgid "Embeded"
-msgstr "Embedded"
-
 msgid "Text Gap"
 msgstr "Text Gap"

@@ -523,12 +508,24 @@ msgid ""
 "depth"
 msgstr "Embedded depth"

+msgid "Input text"
+msgstr "Input text"
+
 msgid "Surface"
 msgstr "Surface"

 msgid "Horizontal text"
 msgstr "Horizontal text"

+msgid "Shift + Mouse move up or dowm"
+msgstr "Shift + Mouse move up or dowm"
+
+msgid "Rotate text"
+msgstr "Rotate text"
+
+msgid "Text shape"
+msgstr "Text shape"
+
 msgid "Ctrl+"
 msgstr "Ctrl+"

@@ -612,11 +609,6 @@ msgstr ""
 msgid "WebView2 Runtime"
 msgstr ""

-msgid ""
-"OrcaSlicer configuration file may be corrupted and is not abled to be parsed."
-"Please delete the file and try again."
-msgstr ""
-
 #, c-format, boost-format
 msgid ""
 "%s\n"
@@ -644,6 +636,13 @@ msgstr "This is the newest version."
 msgid "Info"
 msgstr "Info"

+msgid ""
+"The OrcaSlicer configuration file may be corrupted and cannot be parsed.\n"
+"OrcaSlicer has attempted to recreate the configuration file.\n"
+"Please note, application settings will be lost, but printer profiles will "
+"not be affected."
+msgstr ""
+
 msgid "Rebuild"
 msgstr "Rebuild"

@@ -4081,7 +4080,7 @@ msgid "Upload failed\n"
 msgstr ""

 msgid "obtaining instance_id failed\n"
-msgstr ""
+msgstr "Obtaining instance_id failed\n"

 msgid ""
 "Your comment result cannot be uploaded due to some reasons. As follows:\n"
@@ -4661,7 +4660,7 @@ msgid "Please select a file"
 msgstr "Please select a file"

 msgid "Do you want to replace it"
-msgstr ""
+msgstr "Do you want to replace it?"

 msgid "Message"
 msgstr ""
@@ -5810,13 +5809,13 @@ msgstr ""
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add Primitive"
-"\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add "
+"Primitive\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add Primitive"
-"\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add "
+"Primitive\"->\"Timelapse Wipe Tower\"."

 msgid "Line width"
 msgstr "Line width"
@@ -6088,6 +6087,9 @@ msgstr ""
 msgid "Change filament G-code"
 msgstr "Change filament G-code"

+msgid "Change extrusion role G-code"
+msgstr ""
+
 msgid "Pause G-code"
 msgstr "Pause G-code"

@@ -7882,6 +7884,16 @@ msgstr "Add end G-Code when finishing the entire print."
 msgid "End G-code when finish the printing of this filament"
 msgstr "Add end G-code when finishing the printing of this filament."

+msgid "Ensure vertical shell thickness"
+msgstr "Ensure vertical shell thickness"
+
+msgid ""
+"Add solid infill near sloping surfaces to guarantee the vertical shell "
+"thickness (top+bottom solid layers)"
+msgstr ""
+"Add solid infill near sloping surfaces to guarantee the vertical shell "
+"thickness (top+bottom solid layers)."
+
 msgid "Top surface pattern"
 msgstr "Top surface pattern"

@@ -8531,10 +8543,10 @@ msgstr "Full fan speed at layer"

 msgid ""
 "Fan speed will be ramped up linearly from zero at layer "
-"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
-"\". \"full_fan_speed_layer\" will be ignored if lower than "
-"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
-"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
+"\"close_fan_the_first_x_layers\" to maximum at layer "
+"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
+"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
+"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
 msgstr ""

 msgid "Support interface fan speed"
@@ -9704,21 +9716,21 @@ msgid ""
 "normal(manual) or tree(manual) is selected, only support enforcers are "
 "generated"
 msgstr ""
-"normal(auto) and tree(auto) are used to generate support automatically. If "
+"Normal(auto) and Tree(auto) are used to generate support automatically. If "
 "normal(manual) or tree(manual) is selected, only support enforcers are "
 "generated"

 msgid "normal(auto)"
-msgstr "normal(auto)"
+msgstr "Normal(auto)"

 msgid "tree(auto)"
-msgstr "tree(auto)"
+msgstr "Tree(auto)"

 msgid "normal(manual)"
-msgstr "normal(manual)"
+msgstr "Normal(manual)"

 msgid "tree(manual)"
-msgstr "tree(manual)"
+msgstr "Tree(manual)"

 msgid "Support/object xy distance"
 msgstr "Support/object xy distance"
@@ -10072,6 +10084,9 @@ msgstr ""
 "This G-code is inserted when filament is changed, including T commands to "
 "trigger tool change."

+msgid "This gcode is inserted when the extrusion role is changed"
+msgstr ""
+
 msgid ""
 "Line width for top surfaces. If expressed as a %, it will be computed over "
 "the nozzle diameter."
@@ -10432,6 +10447,18 @@ msgstr ""
 "thickness of the feature, the wall will become as thick as the feature "
 "itself. It's expressed as a percentage over nozzle diameter"

+msgid "Detect narrow internal solid infill"
+msgstr "Detect narrow internal solid infill"
+
+msgid ""
+"This option will auto detect narrow internal solid infill area. If enabled, "
+"concentric pattern will be used for the area to speed printing up. "
+"Otherwise, rectilinear pattern is used defaultly."
+msgstr ""
+"This option will auto-detect narrow internal solid infill areas. If enabled, "
+"the concentric pattern will be used for the area to speed up printing. "
+"Otherwise, the rectilinear pattern will be used by default."
+
 msgid "invalid value "
 msgstr "invalid value "

@@ -11691,6 +11718,9 @@ msgid ""
 "temperature. More info about this in the Wiki."
 msgstr ""

+#~ msgid "Embeded"
+#~ msgstr "Embedded"
+
 #~ msgid "Online Models"
 #~ msgstr "Online Models"

@@ -11707,16 +11737,6 @@ msgstr ""
 #~ "The bed temperature exceeds filament's vitrification temperature. Please "
 #~ "open the front door of printer before printing to avoid nozzle clogs."

-#~ msgid "Ensure vertical shell thickness"
-#~ msgstr "Ensure vertical shell thickness"
-
-#~ msgid ""
-#~ "Add solid infill near sloping surfaces to guarantee the vertical shell "
-#~ "thickness (top+bottom solid layers)"
-#~ msgstr ""
-#~ "Add solid infill near sloping surfaces to guarantee the vertical shell "
-#~ "thickness (top+bottom solid layers)."
-
 #~ msgid "Temperature of vitrificaiton"
 #~ msgstr "Temperature of vitrification"

@@ -11739,18 +11759,6 @@ msgstr ""
 #~ "run at this speed during printing except for during the first several "
 #~ "layers which may be set to have no part cooling."

-#~ msgid "Detect narrow internal solid infill"
-#~ msgstr "Detect narrow internal solid infill"
-
-#~ msgid ""
-#~ "This option will auto detect narrow internal solid infill area. If "
-#~ "enabled, concentric pattern will be used for the area to speed printing "
-#~ "up. Otherwise, rectilinear pattern is used defaultly."
-#~ msgstr ""
-#~ "This option will auto-detect narrow internal solid infill areas. If "
-#~ "enabled, the concentric pattern will be used for the area to speed up "
-#~ "printing. Otherwise, the rectilinear pattern will be used by default."
-
 #~ msgid "Empty layers around bottom are replaced by nearest normal layers."
 #~ msgstr "Empty layers around bottom are replaced by nearest normal layers."

--- a/localization/i18n/es/OrcaSlicer_es.po
+++ b/localization/i18n/es/OrcaSlicer_es.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-11-04 14:18+0800\n"
+"POT-Creation-Date: 2023-11-10 14:54+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: Carlos Fco. Caruncho Serrano <puzzlero@gmail.com>\n"
 "Language-Team: \n"
@@ -254,7 +254,7 @@ msgid "%"
 msgstr "%"

 msgid "uniform scale"
-msgstr "escala uniforme"
+msgstr "Escala uniforme"

 msgid "Left click"
 msgstr "Click izquierdo"
@@ -494,27 +494,12 @@ msgstr "Pintar costura"
 msgid "Remove selection"
 msgstr "Borrar selección"

-msgid "Shift + Mouse move up or dowm"
-msgstr "Shift + Mover ratón arriba u abajo"
-
-msgid "Rotate text"
-msgstr "Rotar texto"
-
-msgid "Text shape"
-msgstr "Forma de texto"
-
 msgid "Font"
 msgstr "Fuente"

 msgid "Thickness"
 msgstr "Grosor"

-msgid "Input text"
-msgstr "Texto de entrada"
-
-msgid "Embeded"
-msgstr "Integrado"
-
 msgid "Text Gap"
 msgstr "Espacio de texto"

@@ -528,12 +513,24 @@ msgstr ""
 "Profundidad\n"
 "Integrada"

+msgid "Input text"
+msgstr "Texto de entrada"
+
 msgid "Surface"
 msgstr "Superficie"

 msgid "Horizontal text"
 msgstr "Texto horizontal"

+msgid "Shift + Mouse move up or dowm"
+msgstr "Shift + Mover ratón arriba u abajo"
+
+msgid "Rotate text"
+msgstr "Rotar texto"
+
+msgid "Text shape"
+msgstr "Forma de texto"
+
 msgid "Ctrl+"
 msgstr "Ctrl+"

@@ -634,22 +631,13 @@ msgstr ""
 msgid "WebView2 Runtime"
 msgstr "Tiempo de ejecución de WebView2"

-msgid ""
-"OrcaSlicer configuration file may be corrupted and is not abled to be parsed."
-"Please delete the file and try again."
-msgstr ""
-"El archivo de configuración de OrcaSlicer puede estar dañado y no puede ser "
-"procesado. Por favor borre el archivo e inténtelo otra vez."
-
-# msgid "OrcaSlicer configuration file may be corrupted and is not abled to be parsed.Please delete the file and try again."
-# msgstr "Es posible que el archivo de configuración de OrcaSlicer esté dañado y no pueda ser procesado. Por favor, borre el archivo e inténtelo de nuevo."
 #, c-format, boost-format
 msgid ""
 "%s\n"
 "Do you want to continue?"
 msgstr ""
 "%s\n"
-"¿Quiere continuar?"
+"¿Quieres continuar?"

 msgid "Remember my choice"
 msgstr "Recordar mi selección"
@@ -671,6 +659,18 @@ msgstr "Esta es la versión más reciente."
 msgid "Info"
 msgstr "Información"

+msgid ""
+"The OrcaSlicer configuration file may be corrupted and cannot be parsed.\n"
+"OrcaSlicer has attempted to recreate the configuration file.\n"
+"Please note, application settings will be lost, but printer profiles will "
+"not be affected."
+msgstr ""
+"El archivo de configuración de OrcaSlicer puede estar dañado y no puede ser "
+"analizado.\n"
+"OrcaSlicer ha intentado recrear el archivo de configuración.\n"
+"Tenga en cuenta que se perderán los ajustes de la aplicación, pero los "
+"perfiles de impresora no se verán afectados."
+
 msgid "Rebuild"
 msgstr "Reconstruir"

@@ -842,10 +842,10 @@ msgid "Add modifier"
 msgstr "Añadir modificador"

 msgid "Add support blocker"
-msgstr "Añadir bloqueo soportes"
+msgstr "Añadir bloqueo de soportes"

 msgid "Add support enforcer"
-msgstr "Añadir forzado de soportes"
+msgstr "Añadir refuerzo de soportes"

 msgid "Select settings"
 msgstr "Seleccione los ajustes"
@@ -905,10 +905,10 @@ msgid "Set as individual objects"
 msgstr "Ajustar como objetos individuales"

 msgid "Fill bed with copies"
-msgstr "Fill bed with copies"
+msgstr "Llenar la cama de copias"

 msgid "Fill the remaining area of bed with copies of the selected object"
-msgstr "Fill the remaining area of bed with copies of the selected object"
+msgstr "Llena el resto del área de la cama con copias del objeto seleccionado"

 msgid "Printable"
 msgstr "Imprimible"
@@ -966,7 +966,7 @@ msgid "Flush into objects' support"
 msgstr "Purgar en los soportes de objetos"

 msgid "Edit in Parameter Table"
-msgstr "Editar en la Tabla de Parámetro"
+msgstr "Editar en la Tabla de Parámetros"

 msgid "Convert from inch"
 msgstr "Convertir desde pulgadas"
@@ -4816,7 +4816,7 @@ msgid "Please select a file"
 msgstr "Por favor, seleccione un archivo"

 msgid "Do you want to replace it"
-msgstr "¿Quiere reemplazarlo?"
+msgstr "¿Desea reemplazarlo?"

 msgid "Message"
 msgstr "Mensaje"
@@ -5146,13 +5146,13 @@ msgid "Units"
 msgstr "Unidades"

 msgid "Home"
-msgstr ""
+msgstr "Página de Inicio"

 msgid "Default Page"
-msgstr ""
+msgstr "Página por defecto"

 msgid "Set the page opened on startup."
-msgstr ""
+msgstr "Establece la página que se abre al inicio."

 msgid "Zoom to mouse position"
 msgstr "Hacer zoom en la posición del ratón"
@@ -5169,14 +5169,14 @@ msgstr "Usar cámara libre"

 msgid "If enabled, use free camera. If not enabled, use constrained camera."
 msgstr ""
-"Si está activada, usa la cámara libre. Si no está activada, usa la cámara "
-"restringida"
+"Si está activada, utiliza la cámara libre. Si no está activada, utiliza la "
+"cámara restringida."

 msgid "Show splash screen"
-msgstr ""
+msgstr "Mostrar pantalla de inicio"

 msgid "Show the splash screen during startup."
-msgstr ""
+msgstr "Muestra la página de bienvenida al iniciar."

 msgid "Show \"Tip of the day\" notification after start"
 msgstr "Mostrar la notificación \"Consejo del Día\" después de empezar"
@@ -6010,8 +6010,8 @@ msgstr ""
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add Primitive"
-"\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add "
+"Primitive\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "Cuando grabamos timelapse sin cabezal de impresión, es recomendable añadir "
 "un \"Torre de Purga de Intervalo\" \n"
@@ -6300,6 +6300,9 @@ msgstr "Timelapse G-code"
 msgid "Change filament G-code"
 msgstr "G-Code para el cambio de filamento"

+msgid "Change extrusion role G-code"
+msgstr "Cambiar el rol de extrusión Código G"
+
 msgid "Pause G-code"
 msgstr "G-Code de pausa"

@@ -8205,6 +8208,16 @@ msgstr "Finalizar el G-Code cuando termine la impresión completa"
 msgid "End G-code when finish the printing of this filament"
 msgstr "Terminar el G-Code cuando se termine de imprimir este filamento"

+msgid "Ensure vertical shell thickness"
+msgstr "Detección de paredes delgadas"
+
+msgid ""
+"Add solid infill near sloping surfaces to guarantee the vertical shell "
+"thickness (top+bottom solid layers)"
+msgstr ""
+"Añadir relleno sólido al lado de capas inclinadas para garantizar el grosor "
+"de carcasa vertical (capas sólidas superior+inferior)"
+
 msgid "Top surface pattern"
 msgstr "Patrón de relleno superior"

@@ -8954,10 +8967,10 @@ msgstr "Velocidad máxima del ventilador en la capa"

 msgid ""
 "Fan speed will be ramped up linearly from zero at layer "
-"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
-"\". \"full_fan_speed_layer\" will be ignored if lower than "
-"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
-"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
+"\"close_fan_the_first_x_layers\" to maximum at layer "
+"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
+"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
+"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
 msgstr ""
 "La velocidad de ventilador se incrementará linealmente de cero a "
 "\"close_fan_the_first_x_layers\" al máximo de capa \"full_fan_speed_layer\". "
@@ -9178,14 +9191,14 @@ msgstr ""
 "Ajústelo a 0 para desactivarlo."

 msgid "Time cost"
+msgstr "Coste dinerario por hora"
+
+msgid "The printer cost per hour"
 msgstr ""
 "La cantidad de dinero que cuesta la impresión que vamos a realizar por hora. "
 "Podemos calcular el coste dependiendo de la potencia de la impresora, el "
 "coste del filamento, etc."

-msgid "The printer cost per hour"
-msgstr "Coste por hora de la impresión"
-
 msgid "money/h"
 msgstr "dinero/hora"

@@ -10732,8 +10745,11 @@ msgid ""
 "This gcode is inserted when change filament, including T command to trigger "
 "tool change"
 msgstr ""
-"Este G-Code se inserta cuando se cambia de filamento, incluyendo el comando "
-"T para activar el cambio de herramienta"
+"Este gcode se inserta al cambiar de filamento, incluyendo el comando T para "
+"activar el cambio de herramienta"
+
+msgid "This gcode is inserted when the extrusion role is changed"
+msgstr "Este gcode se inserta cuando se cambia el rol de extrusión"

 msgid ""
 "Line width for top surfaces. If expressed as a %, it will be computed over "
@@ -11135,6 +11151,19 @@ msgstr ""
 "propia característica. Se expresa en porcentaje sobre el diámetro de la "
 "boquilla"

+msgid "Detect narrow internal solid infill"
+msgstr "Detección de pequeños rellenos sólidos"
+
+msgid ""
+"This option will auto detect narrow internal solid infill area. If enabled, "
+"concentric pattern will be used for the area to speed printing up. "
+"Otherwise, rectilinear pattern is used defaultly."
+msgstr ""
+"Esta opción detectará automáticamente el área de relleno sólido interno "
+"estrecho. Si se activa, se utilizará un patrón concéntrico para el área para "
+"acelerar la impresión. De lo contrario, se utilizará por defecto un patrón "
+"rectilíneo."
+
 msgid "invalid value "
 msgstr "valor inválido "

@@ -11678,12 +11707,12 @@ msgstr ""
 "wiki.\n"
 "\n"
 "Normalmente la calibración es innecesaria. Cuando se inicia una impresión de "
-"un solo color/material, con la opción \"Calibración de la dinámica de caudal"
-"\" marcada en el menú de inicio de impresión, la impresora seguirá el método "
-"antiguo, calibrar el filamento antes de la impresión; Cuando se inicia una "
-"impresión de varios colores/materiales, la impresora utilizará el parámetro "
-"de compensación por defecto para el filamento durante cada cambio de "
-"filamento que tendrá un buen resultado en la mayoría de los casos.\n"
+"un solo color/material, con la opción \"Calibración de la dinámica de "
+"caudal\" marcada en el menú de inicio de impresión, la impresora seguirá el "
+"método antiguo, calibrar el filamento antes de la impresión; Cuando se "
+"inicia una impresión de varios colores/materiales, la impresora utilizará el "
+"parámetro de compensación por defecto para el filamento durante cada cambio "
+"de filamento que tendrá un buen resultado en la mayoría de los casos.\n"
 "\n"
 "Tenga en cuenta que hay algunos casos en los que el resultado de la "
 "calibración no es fiable: el uso de una placa de textura para hacer la "
@@ -12635,6 +12664,20 @@ msgstr ""
 "extrusor/hotend al imprimir filamento de baja temperatura con una "
 "temperatura de carcasa más alta. Más información sobre esto en la Wiki."

+#~ msgid "The minimum printing speed when slow down for cooling"
+#~ msgstr ""
+#~ "La velocidad mínima de impresión cuando se ralentiza para el refrigeración"
+
+#~ msgid "Embeded"
+#~ msgstr "Integrado"
+
+#~ msgid ""
+#~ "OrcaSlicer configuration file may be corrupted and is not abled to be "
+#~ "parsed.Please delete the file and try again."
+#~ msgstr ""
+#~ "El archivo de configuración de OrcaSlicer puede estar dañado y no puede "
+#~ "ser procesado. Por favor borre el archivo e inténtelo otra vez."
+
 #~ msgid "Online Models"
 #~ msgstr "Modelos En Línea"

@@ -12691,10 +12734,6 @@ msgstr ""
 #~ msgstr ""
 #~ "Paso 1: confirme que Bambu Studio y su impresora estén en la misma LAN."

-#~ msgid "The minimum printing speed when slow down for cooling"
-#~ msgstr ""
-#~ "La velocidad mínima de impresión cuando se ralentiza para el refrigeración"
-
 #~ msgid "Empty layers around bottom are replaced by nearest normal layers."
 #~ msgstr ""
 #~ "Las capas vacías del fondo se sustituyen por las capas normales más "
@@ -12725,16 +12764,6 @@ msgstr ""
 #~ "filamento. Por favor, abra la puerta frontal de la impresora antes de "
 #~ "imprimir para evitar atascos en la boquilla."

-#~ msgid "Ensure vertical shell thickness"
-#~ msgstr "Detección de paredes delgadas"
-
-#~ msgid ""
-#~ "Add solid infill near sloping surfaces to guarantee the vertical shell "
-#~ "thickness (top+bottom solid layers)"
-#~ msgstr ""
-#~ "Añadir relleno sólido al lado de capas inclinadas para garantizar el "
-#~ "grosor de carcasa vertical (capas sólidas superior+inferior)"
-
 #~ msgid "Temperature of vitrificaiton"
 #~ msgstr "Temperatura de vitrificación"

@@ -12759,19 +12788,6 @@ msgstr ""
 #~ "funcionará a esta velocidad durante la impresión, excepto en las primeras "
 #~ "capas, que se define por la ausencia de capas de refrigeración"

-#~ msgid "Detect narrow internal solid infill"
-#~ msgstr "Detección de pequeños rellenos sólidos"
-
-#~ msgid ""
-#~ "This option will auto detect narrow internal solid infill area. If "
-#~ "enabled, concentric pattern will be used for the area to speed printing "
-#~ "up. Otherwise, rectilinear pattern is used defaultly."
-#~ msgstr ""
-#~ "Esta opción detectará automáticamente el área de relleno sólido interno "
-#~ "estrecho. Si se activa, se utilizará un patrón concéntrico para el área "
-#~ "para acelerar la impresión. De lo contrario, se utilizará por defecto un "
-#~ "patrón rectilíneo."
-
 #~ msgid "Cali"
 #~ msgstr "Cali"

--- a/localization/i18n/fr/OrcaSlicer_fr.po
+++ b/localization/i18n/fr/OrcaSlicer_fr.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-11-04 14:18+0800\n"
+"POT-Creation-Date: 2023-11-10 14:54+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: Guislain Cyril\n"
@@ -498,27 +498,12 @@ msgstr "Peindre la couture"
 msgid "Remove selection"
 msgstr "Supprimer la sélection"

-msgid "Shift + Mouse move up or dowm"
-msgstr "Shift + Déplacement de la souris vers le haut ou le bas"
-
-msgid "Rotate text"
-msgstr "Rotation du texte"
-
-msgid "Text shape"
-msgstr "Forme du texte"
-
 msgid "Font"
 msgstr "Police"

 msgid "Thickness"
 msgstr "Épaisseur"

-msgid "Input text"
-msgstr "Texte"
-
-msgid "Embeded"
-msgstr "Intégré"
-
 msgid "Text Gap"
 msgstr "Espacement du texte"

@@ -532,12 +517,24 @@ msgstr ""
 "Profondeur\n"
 "intégrée"

+msgid "Input text"
+msgstr "Texte"
+
 msgid "Surface"
 msgstr "Surface"

 msgid "Horizontal text"
 msgstr "Texte horizontal"

+msgid "Shift + Mouse move up or dowm"
+msgstr "Shift + Déplacement de la souris vers le haut ou le bas"
+
+msgid "Rotate text"
+msgstr "Rotation du texte"
+
+msgid "Text shape"
+msgstr "Forme du texte"
+
 msgid "Ctrl+"
 msgstr "Ctrl+"

@@ -633,13 +630,6 @@ msgstr ""
 msgid "WebView2 Runtime"
 msgstr ""

-msgid ""
-"OrcaSlicer configuration file may be corrupted and is not abled to be parsed."
-"Please delete the file and try again."
-msgstr ""
-"Le fichier de configuration de Orca Slicer est peut-être corrompu et ne peut "
-"pas être analysé. Veuillez supprimer le fichier et réessayer."
-
 #, c-format, boost-format
 msgid ""
 "%s\n"
@@ -667,6 +657,13 @@ msgstr "Il s'agit de la version la plus récente."
 msgid "Info"
 msgstr "Info"

+msgid ""
+"The OrcaSlicer configuration file may be corrupted and cannot be parsed.\n"
+"OrcaSlicer has attempted to recreate the configuration file.\n"
+"Please note, application settings will be lost, but printer profiles will "
+"not be affected."
+msgstr ""
+
 msgid "Rebuild"
 msgstr "Reconstruire"

@@ -6312,6 +6309,9 @@ msgstr "G-code de Time lapse"
 msgid "Change filament G-code"
 msgstr "G-code de changement de filament"

+msgid "Change extrusion role G-code"
+msgstr ""
+
 msgid "Pause G-code"
 msgstr "G-code de mise en pause"

@@ -8187,6 +8187,16 @@ msgstr "G-code lorsque l'ensemble de l'impression est terminée"
 msgid "End G-code when finish the printing of this filament"
 msgstr "G-code lorsque l'impression de ce filament est terminée"

+msgid "Ensure vertical shell thickness"
+msgstr "Veiller à l'épaisseur verticale de la coque"
+
+msgid ""
+"Add solid infill near sloping surfaces to guarantee the vertical shell "
+"thickness (top+bottom solid layers)"
+msgstr ""
+"Ajouter un remplissage solide près des surfaces en pente pour garantir "
+"l'épaisseur verticale de la coque (couches solides supérieures + inférieures)"
+
 msgid "Top surface pattern"
 msgstr "Motif des surfaces supérieures"

@@ -10554,6 +10564,9 @@ msgstr ""
 "Ce gcode est inséré lors du changement de filament, y compris la commande T "
 "pour déclencher le changement d'outil"

+msgid "This gcode is inserted when the extrusion role is changed"
+msgstr ""
+
 msgid ""
 "Line width for top surfaces. If expressed as a %, it will be computed over "
 "the nozzle diameter."
@@ -10932,6 +10945,18 @@ msgstr ""
 "aussi épaisse que celle du modèle. Elle est exprimée en pourcentage sur le "
 "diamètre de la buse"

+msgid "Detect narrow internal solid infill"
+msgstr "Détecter un remplissage solide étroit"
+
+msgid ""
+"This option will auto detect narrow internal solid infill area. If enabled, "
+"concentric pattern will be used for the area to speed printing up. "
+"Otherwise, rectilinear pattern is used defaultly."
+msgstr ""
+"Cette option détectera automatiquement les zones de remplissage solides "
+"étroits. Si activé, un motif concentrique sera utilisé pour les zones afin "
+"d'accélérer l'impression. Sinon, le motif rectiligne est utilisé par défaut."
+
 msgid "invalid value "
 msgstr "valeur invalide "

@@ -12303,6 +12328,16 @@ msgid ""
 "temperature. More info about this in the Wiki."
 msgstr ""

+#~ msgid "Embeded"
+#~ msgstr "Intégré"
+
+#~ msgid ""
+#~ "OrcaSlicer configuration file may be corrupted and is not abled to be "
+#~ "parsed.Please delete the file and try again."
+#~ msgstr ""
+#~ "Le fichier de configuration de Orca Slicer est peut-être corrompu et ne "
+#~ "peut pas être analysé. Veuillez supprimer le fichier et réessayer."
+
 #~ msgid "Online Models"
 #~ msgstr "Modèles en ligne"

@@ -12337,17 +12372,6 @@ msgstr ""
 #~ "filament. Veuillez ouvrir la porte avant de l'imprimante avant d'imprimer "
 #~ "pour éviter que la buse ne se bouche."

-#~ msgid "Ensure vertical shell thickness"
-#~ msgstr "Veiller à l'épaisseur verticale de la coque"
-
-#~ msgid ""
-#~ "Add solid infill near sloping surfaces to guarantee the vertical shell "
-#~ "thickness (top+bottom solid layers)"
-#~ msgstr ""
-#~ "Ajouter un remplissage solide près des surfaces en pente pour garantir "
-#~ "l'épaisseur verticale de la coque (couches solides supérieures + "
-#~ "inférieures)"
-
 #~ msgid "Temperature of vitrificaiton"
 #~ msgstr "Température de vitrification"

@@ -12372,19 +12396,6 @@ msgstr ""
 #~ "auxiliaire fonctionnera à cette vitesse pendant l'impression, à "
 #~ "l'exception des premières couches définies sans refroidissement"

-#~ msgid "Detect narrow internal solid infill"
-#~ msgstr "Détecter un remplissage solide étroit"
-
-#~ msgid ""
-#~ "This option will auto detect narrow internal solid infill area. If "
-#~ "enabled, concentric pattern will be used for the area to speed printing "
-#~ "up. Otherwise, rectilinear pattern is used defaultly."
-#~ msgstr ""
-#~ "Cette option détectera automatiquement les zones de remplissage solides "
-#~ "étroits. Si activé, un motif concentrique sera utilisé pour les zones "
-#~ "afin d'accélérer l'impression. Sinon, le motif rectiligne est utilisé par "
-#~ "défaut."
-
 #~ msgid ""
 #~ "Bed temperature for layers except the initial one. Value 0 means the "
 #~ "filament does not support to print on the High Temp"
--- a/localization/i18n/hu/OrcaSlicer_hu.po
+++ b/localization/i18n/hu/OrcaSlicer_hu.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-11-04 14:18+0800\n"
+"POT-Creation-Date: 2023-11-10 14:54+0800\n"
 "Language: hu\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -490,27 +490,12 @@ msgstr "Varratfestés"
 msgid "Remove selection"
 msgstr "Kijelölés törlése"

-msgid "Shift + Mouse move up or dowm"
-msgstr "Shift + Mouse move up or dowm"
-
-msgid "Rotate text"
-msgstr "Rotate text"
-
-msgid "Text shape"
-msgstr "Szöveg alakja"
-
 msgid "Font"
 msgstr "Betűtípus"

 msgid "Thickness"
 msgstr "Vastagság"

-msgid "Input text"
-msgstr "Szöveg"
-
-msgid "Embeded"
-msgstr "Embedded"
-
 msgid "Text Gap"
 msgstr "Text Gap"

@@ -522,12 +507,24 @@ msgid ""
 "depth"
 msgstr "Embedded depth"

+msgid "Input text"
+msgstr "Szöveg"
+
 msgid "Surface"
 msgstr "Surface"

 msgid "Horizontal text"
 msgstr "Horizontal text"

+msgid "Shift + Mouse move up or dowm"
+msgstr "Shift + Mouse move up or dowm"
+
+msgid "Rotate text"
+msgstr "Rotate text"
+
+msgid "Text shape"
+msgstr "Szöveg alakja"
+
 msgid "Ctrl+"
 msgstr "Ctrl+"

@@ -613,11 +610,6 @@ msgstr ""
 msgid "WebView2 Runtime"
 msgstr ""

-msgid ""
-"OrcaSlicer configuration file may be corrupted and is not abled to be parsed."
-"Please delete the file and try again."
-msgstr ""
-
 #, c-format, boost-format
 msgid ""
 "%s\n"
@@ -645,6 +637,13 @@ msgstr "Ez a legújabb verzió."
 msgid "Info"
 msgstr "Infó"

+msgid ""
+"The OrcaSlicer configuration file may be corrupted and cannot be parsed.\n"
+"OrcaSlicer has attempted to recreate the configuration file.\n"
+"Please note, application settings will be lost, but printer profiles will "
+"not be affected."
+msgstr ""
+
 msgid "Rebuild"
 msgstr "Újraindítás"

@@ -6134,6 +6133,9 @@ msgstr ""
 msgid "Change filament G-code"
 msgstr "Filament csere G-kód"

+msgid "Change extrusion role G-code"
+msgstr ""
+
 msgid "Pause G-code"
 msgstr "Szünet G-kód"

@@ -7953,6 +7955,16 @@ msgstr "Befejező G-kód az egész nyomtatás befejezésekor"
 msgid "End G-code when finish the printing of this filament"
 msgstr "Befejező G-kód a filament nyomtatásának befejezésekor"

+msgid "Ensure vertical shell thickness"
+msgstr "Függőleges héjvastagság biztosítása"
+
+msgid ""
+"Add solid infill near sloping surfaces to guarantee the vertical shell "
+"thickness (top+bottom solid layers)"
+msgstr ""
+"A függőleges héjvastagság biztosítása érdekében szilárd kitöltést alkalmaz a "
+"lejtős felületek közelében."
+
 msgid "Top surface pattern"
 msgstr "Felső felület mintázata"

@@ -10162,6 +10174,9 @@ msgstr ""
 "Ez a G-kód kerül beillesztésre, amikor a filament csere történik, beleértve "
 "a szerszámváltást indító T parancsokat is."

+msgid "This gcode is inserted when the extrusion role is changed"
+msgstr ""
+
 msgid ""
 "Line width for top surfaces. If expressed as a %, it will be computed over "
 "the nozzle diameter."
@@ -10524,6 +10539,19 @@ msgstr ""
 "mint a nyomtatandó elem vastagsága, akkor a fal olyan vastag lesz, mint maga "
 "a nyomtatott elem. A fúvóka átmérőjének százalékában van kifejezve"

+msgid "Detect narrow internal solid infill"
+msgstr "Keskeny belső szilárd kitöltés felismerése"
+
+msgid ""
+"This option will auto detect narrow internal solid infill area. If enabled, "
+"concentric pattern will be used for the area to speed printing up. "
+"Otherwise, rectilinear pattern is used defaultly."
+msgstr ""
+"Ez a beállítás automatikusan felismeri a keskeny belső tömör kitöltési "
+"területeket. Ha engedélyezve van, a nyomtatás felgyorsítása érdekében ezen a "
+"területen a koncentrikus mintát fogja használni. Ellenkező esetben "
+"alapértelmezés szerint az egyenes vonalú mintát használja."
+
 msgid "invalid value "
 msgstr "invalid value "

@@ -11856,6 +11884,9 @@ msgid ""
 "temperature. More info about this in the Wiki."
 msgstr ""

+#~ msgid "Embeded"
+#~ msgstr "Embedded"
+
 #~ msgid "Online Models"
 #~ msgstr "Online Models"

@@ -11873,16 +11904,6 @@ msgstr ""
 #~ "Kérjük, hogy a nyomtatás során tartsd nyitva a nyomtatót, vagy csökkentsd "
 #~ "az asztalhőmérsékletet."

-#~ msgid "Ensure vertical shell thickness"
-#~ msgstr "Függőleges héjvastagság biztosítása"
-
-#~ msgid ""
-#~ "Add solid infill near sloping surfaces to guarantee the vertical shell "
-#~ "thickness (top+bottom solid layers)"
-#~ msgstr ""
-#~ "A függőleges héjvastagság biztosítása érdekében szilárd kitöltést "
-#~ "alkalmaz a lejtős felületek közelében."
-
 #~ msgid "Temperature of vitrificaiton"
 #~ msgstr "Üvegesedési hőmérséklet"

@@ -11907,19 +11928,6 @@ msgstr ""
 #~ "ezen a fordulatszámon fog működni a nyomtatás során, kivéve az első "
 #~ "néhány réteget, amelynél kikapcsolt hűtés van megadva"

-#~ msgid "Detect narrow internal solid infill"
-#~ msgstr "Keskeny belső szilárd kitöltés felismerése"
-
-#~ msgid ""
-#~ "This option will auto detect narrow internal solid infill area. If "
-#~ "enabled, concentric pattern will be used for the area to speed printing "
-#~ "up. Otherwise, rectilinear pattern is used defaultly."
-#~ msgstr ""
-#~ "Ez a beállítás automatikusan felismeri a keskeny belső tömör kitöltési "
-#~ "területeket. Ha engedélyezve van, a nyomtatás felgyorsítása érdekében "
-#~ "ezen a területen a koncentrikus mintát fogja használni. Ellenkező esetben "
-#~ "alapértelmezés szerint az egyenes vonalú mintát használja."
-
 #~ msgid "Empty layers around bottom are replaced by nearest normal layers."
 #~ msgstr "Az alsó üres rétegeket a legközelebbi normál rétegek váltják fel."

--- a/localization/i18n/it/OrcaSlicer_it.po
+++ b/localization/i18n/it/OrcaSlicer_it.po
--- a/localization/i18n/ja/OrcaSlicer_ja.po
+++ b/localization/i18n/ja/OrcaSlicer_ja.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-11-04 14:18+0800\n"
+"POT-Creation-Date: 2023-11-10 14:54+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -489,27 +489,12 @@ msgstr "継ぎ目ペイント"
 msgid "Remove selection"
 msgstr "選択を削除"

-msgid "Shift + Mouse move up or dowm"
-msgstr "Shift + Mouse move up or dowm"
-
-msgid "Rotate text"
-msgstr "Rotate text"
-
-msgid "Text shape"
-msgstr "文字形状"
-
 msgid "Font"
 msgstr "フォント"

 msgid "Thickness"
 msgstr "太さ"

-msgid "Input text"
-msgstr "テキスト"
-
-msgid "Embeded"
-msgstr "Embedded"
-
 msgid "Text Gap"
 msgstr "Text Gap"

@@ -521,12 +506,24 @@ msgid ""
 "depth"
 msgstr "Embedded depth"

+msgid "Input text"
+msgstr "テキスト"
+
 msgid "Surface"
 msgstr "Surface"

 msgid "Horizontal text"
 msgstr "Horizontal text"

+msgid "Shift + Mouse move up or dowm"
+msgstr "Shift + Mouse move up or dowm"
+
+msgid "Rotate text"
+msgstr "Rotate text"
+
+msgid "Text shape"
+msgstr "文字形状"
+
 msgid "Ctrl+"
 msgstr "Ctrl+"

@@ -608,11 +605,6 @@ msgstr ""
 msgid "WebView2 Runtime"
 msgstr ""

-msgid ""
-"OrcaSlicer configuration file may be corrupted and is not abled to be parsed."
-"Please delete the file and try again."
-msgstr ""
-
 #, c-format, boost-format
 msgid ""
 "%s\n"
@@ -640,6 +632,13 @@ msgstr "最新バージョンです。"
 msgid "Info"
 msgstr "情報"

+msgid ""
+"The OrcaSlicer configuration file may be corrupted and cannot be parsed.\n"
+"OrcaSlicer has attempted to recreate the configuration file.\n"
+"Please note, application settings will be lost, but printer profiles will "
+"not be affected."
+msgstr ""
+
 msgid "Rebuild"
 msgstr "再構築"

@@ -5975,6 +5974,9 @@ msgstr ""
 msgid "Change filament G-code"
 msgstr "フィラメント変更G-code"

+msgid "Change extrusion role G-code"
+msgstr ""
+
 msgid "Pause G-code"
 msgstr "G-codeを一時停止"

@@ -7702,6 +7704,14 @@ msgstr "造形完了時のG-codeを追加"
 msgid "End G-code when finish the printing of this filament"
 msgstr "このフィラメントを使用終わった時のG-codeを追加"

+msgid "Ensure vertical shell thickness"
+msgstr "壁の厚さを確保"
+
+msgid ""
+"Add solid infill near sloping surfaces to guarantee the vertical shell "
+"thickness (top+bottom solid layers)"
+msgstr "傾斜面にソリッドインフィルを追加"
+
 msgid "Top surface pattern"
 msgstr "トップ面パターン"

@@ -9815,6 +9825,9 @@ msgid ""
 "tool change"
 msgstr "フィラメントを切り替える直後に実行するG-codeです。"

+msgid "This gcode is inserted when the extrusion role is changed"
+msgstr ""
+
 msgid ""
 "Line width for top surfaces. If expressed as a %, it will be computed over "
 "the nozzle diameter."
@@ -10153,6 +10166,18 @@ msgstr ""
 "thickness of the feature, the wall will become as thick as the feature "
 "itself. It's expressed as a percentage over nozzle diameter"

+msgid "Detect narrow internal solid infill"
+msgstr "薄いソリッド インフィル検出"
+
+msgid ""
+"This option will auto detect narrow internal solid infill area. If enabled, "
+"concentric pattern will be used for the area to speed printing up. "
+"Otherwise, rectilinear pattern is used defaultly."
+msgstr ""
+"ソリッド インフィル領域に狭い部分があるか検出します。その設定を有効にする場"
+"合、狭い領域は同心パターンを使用し、それ以外の領域は、直線パターンを使用しま"
+"す。"
+
 msgid "invalid value "
 msgstr "invalid value "

@@ -11461,6 +11486,9 @@ msgid ""
 "temperature. More info about this in the Wiki."
 msgstr ""

+#~ msgid "Embeded"
+#~ msgstr "Embedded"
+
 #~ msgid "Online Models"
 #~ msgstr "Online Models"

@@ -11477,14 +11505,6 @@ msgstr ""
 #~ "ベッド温度がフィラメントの軟化温度より高いです、ノズル詰まりが発生する可能"
 #~ "性があります。ベッド温度を下げるか、プリンタのドアを開けてください。"

-#~ msgid "Ensure vertical shell thickness"
-#~ msgstr "壁の厚さを確保"
-
-#~ msgid ""
-#~ "Add solid infill near sloping surfaces to guarantee the vertical shell "
-#~ "thickness (top+bottom solid layers)"
-#~ msgstr "傾斜面にソリッドインフィルを追加"
-
 #~ msgid "Temperature of vitrificaiton"
 #~ msgstr "軟化温度"

@@ -11504,18 +11524,6 @@ msgstr ""
 #~ "cooling layers"
 #~ msgstr "補助パーツ冷却ファンの回転速度です。"

-#~ msgid "Detect narrow internal solid infill"
-#~ msgstr "薄いソリッド インフィル検出"
-
-#~ msgid ""
-#~ "This option will auto detect narrow internal solid infill area. If "
-#~ "enabled, concentric pattern will be used for the area to speed printing "
-#~ "up. Otherwise, rectilinear pattern is used defaultly."
-#~ msgstr ""
-#~ "ソリッド インフィル領域に狭い部分があるか検出します。その設定を有効にする"
-#~ "場合、狭い領域は同心パターンを使用し、それ以外の領域は、直線パターンを使用"
-#~ "します。"
-
 #~ msgid "Empty layers around bottom are replaced by nearest normal layers."
 #~ msgstr "底面との隙間があります、レイヤーを入れ替えました"

--- a/localization/i18n/ko/OrcaSlicer_ko.po
+++ b/localization/i18n/ko/OrcaSlicer_ko.po
@@ -7,9 +7,10 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-11-04 14:18+0800\n"
-"PO-Revision-Date: 2023-10-26 16:47+0900\n"
-"Last-Translator: Hotsolidinfill\n"
+"POT-Creation-Date: 2023-11-10 14:54+0800\n"
+"PO-Revision-Date: 2023-11-14 11:26+0900\n"
+"Last-Translator: Hotsolidinfill <138652683+Hotsolidinfill@users.noreply."
+"github.com>, crwusiz <crwusiz@naver.com>\n"
 "Language-Team: \n"
 "Language: ko_KR\n"
 "MIME-Version: 1.0\n"
@@ -495,27 +496,12 @@ msgstr "솔기 칠하기"
 msgid "Remove selection"
 msgstr "선택 삭제"

-msgid "Shift + Mouse move up or dowm"
-msgstr "Shift + 마우스 위 or 아래"
-
-msgid "Rotate text"
-msgstr "텍스트 회전"
-
-msgid "Text shape"
-msgstr "텍스트 모양"
-
 msgid "Font"
 msgstr "글꼴"

 msgid "Thickness"
 msgstr "두께"

-msgid "Input text"
-msgstr "텍스트 입력"
-
-msgid "Embeded"
-msgstr "매입"
-
 msgid "Text Gap"
 msgstr "글자 간격"

@@ -529,12 +515,24 @@ msgstr ""
 "내장\n"
 "깊이"

+msgid "Input text"
+msgstr "텍스트 입력"
+
 msgid "Surface"
 msgstr "표면"

 msgid "Horizontal text"
 msgstr "가로 텍스트"

+msgid "Shift + Mouse move up or dowm"
+msgstr "Shift + 마우스 위 or 아래"
+
+msgid "Rotate text"
+msgstr "텍스트 회전"
+
+msgid "Text shape"
+msgstr "텍스트 모양"
+
 msgid "Ctrl+"
 msgstr "Ctrl+"

@@ -623,13 +621,6 @@ msgstr ""
 msgid "WebView2 Runtime"
 msgstr "WebView2 런타임"

-msgid ""
-"OrcaSlicer configuration file may be corrupted and is not abled to be parsed."
-"Please delete the file and try again."
-msgstr ""
-"OrcaSlicer 구성 파일이 손상되어 구문 분석할 수 없습니다. 파일을 삭제하고 다"
-"시 시도하십시오."
-
 #, c-format, boost-format
 msgid ""
 "%s\n"
@@ -657,6 +648,16 @@ msgstr "최신 버전입니다."
 msgid "Info"
 msgstr "정보"

+msgid ""
+"The OrcaSlicer configuration file may be corrupted and cannot be parsed.\n"
+"OrcaSlicer has attempted to recreate the configuration file.\n"
+"Please note, application settings will be lost, but printer profiles will "
+"not be affected."
+msgstr ""
+"OrcaSlicer 구성 파일이 손상되어 구문을 분석할 수 없습니다.\n"
+"OrcaSlicer가 구성 파일을 다시 생성하려고 시도했습니다.\n"
+"응용 프로그램 설정은 손실되지만 프린터 프로필은 영향을 받지 않습니다."
+
 msgid "Rebuild"
 msgstr "재빌드"

@@ -5001,13 +5002,13 @@ msgid "Units"
 msgstr "단위"

 msgid "Home"
-msgstr ""
+msgstr "홈"

 msgid "Default Page"
-msgstr ""
+msgstr "기본 페이지"

 msgid "Set the page opened on startup."
-msgstr ""
+msgstr "시작 시 열리는 페이지를 설정합니다."

 msgid "Zoom to mouse position"
 msgstr "마우스 위치로 확대"
@@ -5026,10 +5027,10 @@ msgstr ""
 "카메라 앵글을 사용합니다."

 msgid "Show splash screen"
-msgstr ""
+msgstr "스플래시 화면 표시"

 msgid "Show the splash screen during startup."
-msgstr ""
+msgstr "시작하는 동안 스플래시 화면을 표시합니다."

 msgid "Show \"Tip of the day\" notification after start"
 msgstr "시작 후 \"오늘의 팁\" 알림 표시"
@@ -5822,8 +5823,8 @@ msgstr ""
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add Primitive"
-"\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add "
+"Primitive\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "툴헤드 없이 시간 경과를 기록할 경우 \"타임랩스 닦기 타워\"를 추가하는 것이 좋"
 "습니다\n"
@@ -6096,6 +6097,9 @@ msgstr "타임랩스 G코드"
 msgid "Change filament G-code"
 msgstr "필라멘트 교체 G코드"

+msgid "Change extrusion role G-code"
+msgstr "압출 역할 G코드 변경"
+
 msgid "Pause G-code"
 msgstr "일시정지 G코드"

@@ -7698,7 +7702,7 @@ msgid "Enable this option to slow printing down for different overhang degree"
 msgstr "돌출부 정도에 따라 출력 속도를 낮추려면 이 옵션을 활성화합니다"

 msgid "Slow down for curled perimeters"
-msgstr "꺾여 있는 둘레에는 속도를 줄이세요"
+msgstr "꺾여 있는 둘레에서 감속"

 msgid ""
 "Enable this option to slow printing down in areas where potential curled "
@@ -7916,6 +7920,16 @@ msgstr "전체 출력이 끝날때의 End G-code"
 msgid "End G-code when finish the printing of this filament"
 msgstr "이 필라멘트의 출력이 끝날때의 End G-code"

+msgid "Ensure vertical shell thickness"
+msgstr "수직 쉘 두께 확보"
+
+msgid ""
+"Add solid infill near sloping surfaces to guarantee the vertical shell "
+"thickness (top+bottom solid layers)"
+msgstr ""
+"경사진 표면 근처에 꽉찬 내부 채움을 추가하여 수직 쉘 두께를 보장합니다(상단"
+"+하단 꽉찬 레이어)"
+
 msgid "Top surface pattern"
 msgstr "상단 표면 패턴"

@@ -8605,10 +8619,10 @@ msgstr "팬 최대 속도 레이어"

 msgid ""
 "Fan speed will be ramped up linearly from zero at layer "
-"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
-"\". \"full_fan_speed_layer\" will be ignored if lower than "
-"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
-"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
+"\"close_fan_the_first_x_layers\" to maximum at layer "
+"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
+"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
+"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
 msgstr ""
 "팬 속도는 \"close_fan_the_first_x_layers\" 의 0에서 \"full_fan_speed_layer\" "
 "의 최고 속도까지 선형적으로 증가합니다. \"full_fan_speed_layer\"가 "
@@ -9245,6 +9259,8 @@ msgid ""
 "cooling is enabled, when printing overhangs and when feature speeds are not "
 "specified explicitly."
 msgstr ""
+"보다 나은 레이어 냉각을 위해 속도를 늦출 때, 돌출부 출력 속도가 명시적으로 지"
+"정되지 않은 경우 필라멘트의 최소 출력 속도가 활성화됩니다."

 msgid "Nozzle diameter"
 msgstr "노즐 직경"
@@ -10277,6 +10293,9 @@ msgstr ""
 "이 G코드는 도구 변경을 유발하는 T 명령을 포함하여 필라멘트를 변경할 때 삽입됩"
 "니다"

+msgid "This gcode is inserted when the extrusion role is changed"
+msgstr "이 G코드는 압출 역할이 변경될 때 삽입됩니다."
+
 msgid ""
 "Line width for top surfaces. If expressed as a %, it will be computed over "
 "the nozzle diameter."
@@ -10646,6 +10665,18 @@ msgstr ""
 "비가 형상의 두께보다 얇은 경우 벽은 형상 자체만큼 두꺼워집니다. 노즐 직경에 "
 "대한 백분율로 표시됩니다"

+msgid "Detect narrow internal solid infill"
+msgstr "좁은 내부 꽉찬 내부 채움 감지"
+
+msgid ""
+"This option will auto detect narrow internal solid infill area. If enabled, "
+"concentric pattern will be used for the area to speed printing up. "
+"Otherwise, rectilinear pattern is used defaultly."
+msgstr ""
+"이 옵션은 좁은 내부 꽉찬 내부 채움 영역을 자동으로 감지합니다. 활성화하면 출"
+"력 속도를 높이기 위해 해당 영역에 동심 패턴이 사용됩니다. 그렇지 않으면 직선 "
+"패턴이 기본적으로 사용됩니다."
+
 msgid "invalid value "
 msgstr "잘못된 값 "

@@ -12088,6 +12119,16 @@ msgstr ""
 "기/핫엔드가 막힐 가능성을 줄일 수 있습니다. 이에 대한 자세한 내용은 Wiki에서 "
 "확인하세요."

+#~ msgid "Embeded"
+#~ msgstr "매입"
+
+#~ msgid ""
+#~ "OrcaSlicer configuration file may be corrupted and is not abled to be "
+#~ "parsed.Please delete the file and try again."
+#~ msgstr ""
+#~ "OrcaSlicer 구성 파일이 손상되어 구문 분석할 수 없습니다. 파일을 삭제하고 "
+#~ "다시 시도하십시오."
+
 #~ msgid "Online Models"
 #~ msgstr "온라인 모델"

@@ -12140,16 +12181,6 @@ msgstr ""
 #~ msgid "Activate for better air filtration"
 #~ msgstr "더 나은 공기 여과를 위해 활성화하세요"

-#~ msgid "Ensure vertical shell thickness"
-#~ msgstr "수직 쉘 두께 확보"
-
-#~ msgid ""
-#~ "Add solid infill near sloping surfaces to guarantee the vertical shell "
-#~ "thickness (top+bottom solid layers)"
-#~ msgstr ""
-#~ "경사진 표면 근처에 꽉찬 내부 채움을 추가하여 수직 쉘 두께를 보장합니다(상"
-#~ "단+하단 꽉찬 레이어)"
-
 #~ msgid "Temperature of vitrificaiton"
 #~ msgstr "유리 전이 온도"

@@ -12178,18 +12209,6 @@ msgstr ""
 #~ "보조 출력 냉각 팬의 속도입니다. 냉각 중지 레이어로 정의된 처음 몇 개의 레"
 #~ "이어를 제외하고 출력 중에 보조 팬이 이 속도로 작동됩니다"

-#~ msgid "Detect narrow internal solid infill"
-#~ msgstr "좁은 내부 꽉찬 내부 채움 감지"
-
-#~ msgid ""
-#~ "This option will auto detect narrow internal solid infill area. If "
-#~ "enabled, concentric pattern will be used for the area to speed printing "
-#~ "up. Otherwise, rectilinear pattern is used defaultly."
-#~ msgstr ""
-#~ "이 옵션은 좁은 내부 꽉찬 내부 채움 영역을 자동으로 감지합니다. 활성화하면 "
-#~ "출력 속도를 높이기 위해 해당 영역에 동심 패턴이 사용됩니다. 그렇지 않으면 "
-#~ "직선 패턴이 기본적으로 사용됩니다."
-
 #~ msgid ""
 #~ "Filter out gaps smaller than the threshold specified. This setting won't "
 #~ "affect top/bottom layers"
--- a/localization/i18n/nl/OrcaSlicer_nl.po
+++ b/localization/i18n/nl/OrcaSlicer_nl.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-11-04 14:18+0800\n"
+"POT-Creation-Date: 2023-11-10 14:54+0800\n"
 "Language: nl\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -492,28 +492,12 @@ msgstr "Naad schilderen"
 msgid "Remove selection"
 msgstr "Selectie verwijderen"

-msgid "Shift + Mouse move up or dowm"
-msgstr "Shift + Muis op of neer"
-
-msgid "Rotate text"
-msgstr "Draai tekst"
-
-msgid "Text shape"
-msgstr "Tekstvorm"
-
 msgid "Font"
 msgstr "Lettertype"

 msgid "Thickness"
 msgstr "Dikte"

-msgid "Input text"
-msgstr "Tekst invoeren"
-
-# Source and destination string both English but don't match!
-msgid "Embeded"
-msgstr "Embedded"
-
 msgid "Text Gap"
 msgstr "Tekstruimte"

@@ -525,12 +509,24 @@ msgid ""
 "depth"
 msgstr "Embedded depth"

+msgid "Input text"
+msgstr "Tekst invoeren"
+
 msgid "Surface"
 msgstr "Oppervlak"

 msgid "Horizontal text"
 msgstr "Horizontale tekst"

+msgid "Shift + Mouse move up or dowm"
+msgstr "Shift + Muis op of neer"
+
+msgid "Rotate text"
+msgstr "Draai tekst"
+
+msgid "Text shape"
+msgstr "Tekstvorm"
+
 msgid "Ctrl+"
 msgstr "Ctrl+"

@@ -623,13 +619,6 @@ msgstr ""
 msgid "WebView2 Runtime"
 msgstr "WebView2 Runtime"

-msgid ""
-"OrcaSlicer configuration file may be corrupted and is not abled to be parsed."
-"Please delete the file and try again."
-msgstr ""
-"OrcaSlicer configuratiebestand is mogelijks corrupt, en kan niet verwerkt "
-"worden.Verwijder het configuratiebestand en probeer het opnieuw."
-
 #, c-format, boost-format
 msgid ""
 "%s\n"
@@ -658,6 +647,13 @@ msgstr "Dit is de nieuwste versie."
 msgid "Info"
 msgstr "Informatie"

+msgid ""
+"The OrcaSlicer configuration file may be corrupted and cannot be parsed.\n"
+"OrcaSlicer has attempted to recreate the configuration file.\n"
+"Please note, application settings will be lost, but printer profiles will "
+"not be affected."
+msgstr ""
+
 msgid "Rebuild"
 msgstr "Herbouwen"

@@ -6207,6 +6203,9 @@ msgstr ""
 msgid "Change filament G-code"
 msgstr "Filament G-code aanpassen"

+msgid "Change extrusion role G-code"
+msgstr ""
+
 msgid "Pause G-code"
 msgstr "Pauzeer G-code"

@@ -8045,6 +8044,16 @@ msgid "End G-code when finish the printing of this filament"
 msgstr ""
 "Voeg een eind G-code toe bij het afronden van het printen van dit filament."

+msgid "Ensure vertical shell thickness"
+msgstr "Zorg voor een verticale schaaldikte"
+
+msgid ""
+"Add solid infill near sloping surfaces to guarantee the vertical shell "
+"thickness (top+bottom solid layers)"
+msgstr ""
+"Voeg dichte vulling toe in de buurt van hellende oppervlakken om de "
+"verticale schaaldikte te garanderen (boven+onder vaste lagen)."
+
 msgid "Top surface pattern"
 msgstr "Patroon bovenvlak"

@@ -10276,6 +10285,9 @@ msgstr ""
 "Deze G-code wordt ingevoegd wanneer filament wordt vervangen, inclusief T-"
 "commando's om gereedschapswissel te activeren."

+msgid "This gcode is inserted when the extrusion role is changed"
+msgstr ""
+
 msgid ""
 "Line width for top surfaces. If expressed as a %, it will be computed over "
 "the nozzle diameter."
@@ -10645,6 +10657,19 @@ msgstr ""
 "van het element, wordt de muur net zo dik als het object zelf. Dit wordt "
 "uitgedrukt als een percentage ten opzichte van de diameter van de nozzle"

+msgid "Detect narrow internal solid infill"
+msgstr "Detecteer dichte interne solide vulling (infill)"
+
+msgid ""
+"This option will auto detect narrow internal solid infill area. If enabled, "
+"concentric pattern will be used for the area to speed printing up. "
+"Otherwise, rectilinear pattern is used defaultly."
+msgstr ""
+"Deze optie detecteert automatisch smalle interne solide opvul (infill) "
+"gebieden. Indien ingeschakeld, wordt het concentrische patroon gebruikt voor "
+"het gebied om het afdrukken te versnellen. Anders wordt standaard het "
+"rechtlijnige patroon gebruikt."
+
 msgid "invalid value "
 msgstr "invalid value "

@@ -11977,6 +12002,17 @@ msgid ""
 "temperature. More info about this in the Wiki."
 msgstr ""

+# Source and destination string both English but don't match!
+#~ msgid "Embeded"
+#~ msgstr "Embedded"
+
+#~ msgid ""
+#~ "OrcaSlicer configuration file may be corrupted and is not abled to be "
+#~ "parsed.Please delete the file and try again."
+#~ msgstr ""
+#~ "OrcaSlicer configuratiebestand is mogelijks corrupt, en kan niet verwerkt "
+#~ "worden.Verwijder het configuratiebestand en probeer het opnieuw."
+
 #~ msgid "Online Models"
 #~ msgstr "Online Models"

@@ -11994,16 +12030,6 @@ msgstr ""
 #~ "filament. Open de voorkdeur van de printer voor het printen om "
 #~ "verstopping van de nozzles te voorkomen."

-#~ msgid "Ensure vertical shell thickness"
-#~ msgstr "Zorg voor een verticale schaaldikte"
-
-#~ msgid ""
-#~ "Add solid infill near sloping surfaces to guarantee the vertical shell "
-#~ "thickness (top+bottom solid layers)"
-#~ msgstr ""
-#~ "Voeg dichte vulling toe in de buurt van hellende oppervlakken om de "
-#~ "verticale schaaldikte te garanderen (boven+onder vaste lagen)."
-
 #~ msgid "Temperature of vitrificaiton"
 #~ msgstr "Temperatuur van verglazing"

@@ -12028,19 +12054,6 @@ msgstr ""
 #~ "op deze snelheid tijdens het afdrukken, behalve de eerste paar lagen, die "
 #~ "worden gedefinieerd door geen koellagen"

-#~ msgid "Detect narrow internal solid infill"
-#~ msgstr "Detecteer dichte interne solide vulling (infill)"
-
-#~ msgid ""
-#~ "This option will auto detect narrow internal solid infill area. If "
-#~ "enabled, concentric pattern will be used for the area to speed printing "
-#~ "up. Otherwise, rectilinear pattern is used defaultly."
-#~ msgstr ""
-#~ "Deze optie detecteert automatisch smalle interne solide opvul (infill) "
-#~ "gebieden. Indien ingeschakeld, wordt het concentrische patroon gebruikt "
-#~ "voor het gebied om het afdrukken te versnellen. Anders wordt standaard "
-#~ "het rechtlijnige patroon gebruikt."
-
 #~ msgid "Empty layers around bottom are replaced by nearest normal layers."
 #~ msgstr ""
 #~ "Lege lagen in de buurt van de bodem worden vervangen door de "
--- a/localization/i18n/ru/OrcaSlicer_ru.po
+++ b/localization/i18n/ru/OrcaSlicer_ru.po
--- a/localization/i18n/sv/OrcaSlicer_sv.po
+++ b/localization/i18n/sv/OrcaSlicer_sv.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-11-04 14:18+0800\n"
+"POT-Creation-Date: 2023-11-10 14:54+0800\n"
 "Language: sv\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -489,27 +489,12 @@ msgstr "Målning av sömmar"
 msgid "Remove selection"
 msgstr "Ta bort val"

-msgid "Shift + Mouse move up or dowm"
-msgstr "Shift + Mus flytta uppåt eller nedåt"
-
-msgid "Rotate text"
-msgstr "Rotera text"
-
-msgid "Text shape"
-msgstr "Text form"
-
 msgid "Font"
 msgstr "Typsnitt"

 msgid "Thickness"
 msgstr "Tjocklek"

-msgid "Input text"
-msgstr "Skriv in text"
-
-msgid "Embeded"
-msgstr "Inbäddad"
-
 msgid "Text Gap"
 msgstr "Text mellanrum"

@@ -521,12 +506,24 @@ msgid ""
 "depth"
 msgstr "Inbäddat djup"

+msgid "Input text"
+msgstr "Skriv in text"
+
 msgid "Surface"
 msgstr "Yta"

 msgid "Horizontal text"
 msgstr "Vågrät text"

+msgid "Shift + Mouse move up or dowm"
+msgstr "Shift + Mus flytta uppåt eller nedåt"
+
+msgid "Rotate text"
+msgstr "Rotera text"
+
+msgid "Text shape"
+msgstr "Text form"
+
 msgid "Ctrl+"
 msgstr "Ctrl +"

@@ -609,11 +606,6 @@ msgstr ""
 msgid "WebView2 Runtime"
 msgstr ""

-msgid ""
-"OrcaSlicer configuration file may be corrupted and is not abled to be parsed."
-"Please delete the file and try again."
-msgstr ""
-
 #, c-format, boost-format
 msgid ""
 "%s\n"
@@ -641,6 +633,13 @@ msgstr "Det är den senaste versionen."
 msgid "Info"
 msgstr "Info"

+msgid ""
+"The OrcaSlicer configuration file may be corrupted and cannot be parsed.\n"
+"OrcaSlicer has attempted to recreate the configuration file.\n"
+"Please note, application settings will be lost, but printer profiles will "
+"not be affected."
+msgstr ""
+
 msgid "Rebuild"
 msgstr "Återskapa"

@@ -6110,6 +6109,9 @@ msgstr ""
 msgid "Change filament G-code"
 msgstr "Byta filament G-kod"

+msgid "Change extrusion role G-code"
+msgstr ""
+
 msgid "Pause G-code"
 msgstr "Paus G-kod"

@@ -7895,6 +7897,16 @@ msgstr "Lägg till slut G-kod när utskriften har avslutas"
 msgid "End G-code when finish the printing of this filament"
 msgstr "Lägg till slut G-kod när utskriften har avslutas med detta filament"

+msgid "Ensure vertical shell thickness"
+msgstr "Säkerställ vertikal skaltjocklek"
+
+msgid ""
+"Add solid infill near sloping surfaces to guarantee the vertical shell "
+"thickness (top+bottom solid layers)"
+msgstr ""
+"Lägg till massiv fyllning nära sluttande ytor för att garantera den "
+"vertikala skal tjockleken (topp+bottenfasta lager)."
+
 msgid "Top surface pattern"
 msgstr "Topp ytans mönster"

@@ -10087,6 +10099,9 @@ msgstr ""
 "G-koden sätts in vid filament byte, inklusive T kommando som aktiverar "
 "verktygs byte"

+msgid "This gcode is inserted when the extrusion role is changed"
+msgstr ""
+
 msgid ""
 "Line width for top surfaces. If expressed as a %, it will be computed over "
 "the nozzle diameter."
@@ -10447,6 +10462,19 @@ msgstr ""
 "elementet blir väggen lika tjock som själva elementet. Den uttrycks i "
 "procent av nozzel diametern."

+msgid "Detect narrow internal solid infill"
+msgstr "Upptäck tight inre solid ifyllnad"
+
+msgid ""
+"This option will auto detect narrow internal solid infill area. If enabled, "
+"concentric pattern will be used for the area to speed printing up. "
+"Otherwise, rectilinear pattern is used defaultly."
+msgstr ""
+"Detta val kommer att auto upptäcka tight inre solid ifyllnads område. Om "
+"aktiverat kommer det koncentriska mönstret att användas för området för att "
+"påskynda utskriften. Annars kommer mönstret med räta linjer att användas som "
+"standard."
+
 msgid "invalid value "
 msgstr "ogiltigt värde "

@@ -11781,6 +11809,9 @@ msgid ""
 "temperature. More info about this in the Wiki."
 msgstr ""

+#~ msgid "Embeded"
+#~ msgstr "Inbäddad"
+
 #~ msgid "Online Models"
 #~ msgstr "Online modeller"

@@ -11798,16 +11829,6 @@ msgstr ""
 #~ "Öppna skrivarens främre dörr innan du skriver ut för att undvika att "
 #~ "nozzeln täpps till."

-#~ msgid "Ensure vertical shell thickness"
-#~ msgstr "Säkerställ vertikal skaltjocklek"
-
-#~ msgid ""
-#~ "Add solid infill near sloping surfaces to guarantee the vertical shell "
-#~ "thickness (top+bottom solid layers)"
-#~ msgstr ""
-#~ "Lägg till massiv fyllning nära sluttande ytor för att garantera den "
-#~ "vertikala skal tjockleken (topp+bottenfasta lager)."
-
 #~ msgid "Temperature of vitrificaiton"
 #~ msgstr "Kristalliserings temperatur"

@@ -11830,19 +11851,6 @@ msgstr ""
 #~ "denna hastighet under utskrift förutom de lager som definieras som inga "
 #~ "kyl lager"

-#~ msgid "Detect narrow internal solid infill"
-#~ msgstr "Upptäck tight inre solid ifyllnad"
-
-#~ msgid ""
-#~ "This option will auto detect narrow internal solid infill area. If "
-#~ "enabled, concentric pattern will be used for the area to speed printing "
-#~ "up. Otherwise, rectilinear pattern is used defaultly."
-#~ msgstr ""
-#~ "Detta val kommer att auto upptäcka tight inre solid ifyllnads område. Om "
-#~ "aktiverat kommer det koncentriska mönstret att användas för området för "
-#~ "att påskynda utskriften. Annars kommer mönstret med räta linjer att "
-#~ "användas som standard."
-
 #~ msgid "Empty layers around bottom are replaced by nearest normal layers."
 #~ msgstr "Tomma lager runt botten ersätts med närmast normala lager."

--- a/localization/i18n/tr/OrcaSlicer_tr.po
+++ b/localization/i18n/tr/OrcaSlicer_tr.po
--- a/localization/i18n/uk/OrcaSlicer_uk.po
+++ b/localization/i18n/uk/OrcaSlicer_uk.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-11-04 14:18+0800\n"
+"POT-Creation-Date: 2023-11-10 14:54+0800\n"
 "PO-Revision-Date: 2023-08-10 20:25-0400\n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -495,27 +495,12 @@ msgstr "Малювання шва"
 msgid "Remove selection"
 msgstr "Видалити виділення"

-msgid "Shift + Mouse move up or dowm"
-msgstr "Shift + переміщення миші вгору або вниз"
-
-msgid "Rotate text"
-msgstr "Повернути текст"
-
-msgid "Text shape"
-msgstr "Форма тексту"
-
 msgid "Font"
 msgstr "Шрифт"

 msgid "Thickness"
 msgstr "Товщина"

-msgid "Input text"
-msgstr "Введення тексту"
-
-msgid "Embeded"
-msgstr "Вбудовано"
-
 msgid "Text Gap"
 msgstr "Пробіл у тексті"

@@ -527,12 +512,24 @@ msgid ""
 "depth"
 msgstr "Вбудована глибина"

+msgid "Input text"
+msgstr "Введення тексту"
+
 msgid "Surface"
 msgstr "Поверхня"

 msgid "Horizontal text"
 msgstr "Горизонтальний текст"

+msgid "Shift + Mouse move up or dowm"
+msgstr "Shift + переміщення миші вгору або вниз"
+
+msgid "Rotate text"
+msgstr "Повернути текст"
+
+msgid "Text shape"
+msgstr "Форма тексту"
+
 msgid "Ctrl+"
 msgstr "Ctrl+"

@@ -621,13 +618,6 @@ msgstr ""
 msgid "WebView2 Runtime"
 msgstr ""

-msgid ""
-"OrcaSlicer configuration file may be corrupted and is not abled to be parsed."
-"Please delete the file and try again."
-msgstr ""
-"Файл конфігурації OrcaSlicer може бути пошкоджений і не підлягає розбору. "
-"Видаліть файл і спробуйте ще раз."
-
 #, c-format, boost-format
 msgid ""
 "%s\n"
@@ -653,6 +643,13 @@ msgstr "Це найновіша версія."
 msgid "Info"
 msgstr "Інформація"

+msgid ""
+"The OrcaSlicer configuration file may be corrupted and cannot be parsed.\n"
+"OrcaSlicer has attempted to recreate the configuration file.\n"
+"Please note, application settings will be lost, but printer profiles will "
+"not be affected."
+msgstr ""
+
 msgid "Rebuild"
 msgstr "Відновити"

@@ -6153,6 +6150,9 @@ msgstr ""
 msgid "Change filament G-code"
 msgstr "G-code Зміни філаменту"

+msgid "Change extrusion role G-code"
+msgstr ""
+
 msgid "Pause G-code"
 msgstr "G-code Паузи"

@@ -7964,6 +7964,16 @@ msgstr "Завершальний G-code, коли закінчити весь д
 msgid "End G-code when finish the printing of this filament"
 msgstr "Завершальний G-code, коли закінчите друк цієї нитки"

+msgid "Ensure vertical shell thickness"
+msgstr "Забезпечення вертикальної товщини оболонки"
+
+msgid ""
+"Add solid infill near sloping surfaces to guarantee the vertical shell "
+"thickness (top+bottom solid layers)"
+msgstr ""
+"Додавання заповнення твердого тіла поблизу похилих поверхонь для Гарантії "
+"товщини вертикальної оболонки (верхній + нижній шари твердого тіла)"
+
 msgid "Top surface pattern"
 msgstr "Малюнок верхньої поверхні"

@@ -10269,6 +10279,9 @@ msgstr ""
 "Цей gcode вставляється при зміні філаменту, включаючи команду T для запуску "
 "зміни інструменту"

+msgid "This gcode is inserted when the extrusion role is changed"
+msgstr ""
+
 msgid ""
 "Line width for top surfaces. If expressed as a %, it will be computed over "
 "the nozzle diameter."
@@ -10621,6 +10634,19 @@ msgstr ""
 "елемента, то товщина периметра дорівнюватиме товщині самого елемента. Він "
 "виражається у відсотках від діаметра сопла"

+msgid "Detect narrow internal solid infill"
+msgstr "Виявлення вузького внутрішнього заповнення твердим тілом"
+
+msgid ""
+"This option will auto detect narrow internal solid infill area. If enabled, "
+"concentric pattern will be used for the area to speed printing up. "
+"Otherwise, rectilinear pattern is used defaultly."
+msgstr ""
+"Ця опція автоматично визначає вузьку внутрішню область заповненнятвердого "
+"тіла. Якщо цей параметр увімкнено, для прискорення друку області "
+"використовуватиметься концентричний візерунок. Інакше за умовчанням "
+"Використовується прямолінійний малюнок."
+
 msgid "invalid value "
 msgstr "неправильне значення "

@@ -11970,6 +11996,16 @@ msgid ""
 "temperature. More info about this in the Wiki."
 msgstr ""

+#~ msgid "Embeded"
+#~ msgstr "Вбудовано"
+
+#~ msgid ""
+#~ "OrcaSlicer configuration file may be corrupted and is not abled to be "
+#~ "parsed.Please delete the file and try again."
+#~ msgstr ""
+#~ "Файл конфігурації OrcaSlicer може бути пошкоджений і не підлягає розбору. "
+#~ "Видаліть файл і спробуйте ще раз."
+
 #~ msgid "The minimum printing speed when slow down for cooling"
 #~ msgstr "Мінімальна швидкість друку при уповільненні для охолодження"

@@ -11981,16 +12017,6 @@ msgstr ""
 #~ "відчиняйте передні дверцята принтера перед печаткою, щоб уникнути "
 #~ "засмічення сопла."

-#~ msgid "Ensure vertical shell thickness"
-#~ msgstr "Забезпечення вертикальної товщини оболонки"
-
-#~ msgid ""
-#~ "Add solid infill near sloping surfaces to guarantee the vertical shell "
-#~ "thickness (top+bottom solid layers)"
-#~ msgstr ""
-#~ "Додавання заповнення твердого тіла поблизу похилих поверхонь для Гарантії "
-#~ "товщини вертикальної оболонки (верхній + нижній шари твердого тіла)"
-
 #~ msgid "Temperature of vitrificaiton"
 #~ msgstr "Температура склування"

@@ -12015,19 +12041,6 @@ msgstr ""
 #~ "ДопоміжнийВентилятор буде працювати з такою швидкістю під час друку, за "
 #~ "винятком перших кількох шарів, які не визначаються шарами охолодження"

-#~ msgid "Detect narrow internal solid infill"
-#~ msgstr "Виявлення вузького внутрішнього заповнення твердим тілом"
-
-#~ msgid ""
-#~ "This option will auto detect narrow internal solid infill area. If "
-#~ "enabled, concentric pattern will be used for the area to speed printing "
-#~ "up. Otherwise, rectilinear pattern is used defaultly."
-#~ msgstr ""
-#~ "Ця опція автоматично визначає вузьку внутрішню область заповненнятвердого "
-#~ "тіла. Якщо цей параметр увімкнено, для прискорення друку області "
-#~ "використовуватиметься концентричний візерунок. Інакше за умовчанням "
-#~ "Використовується прямолінійний малюнок."
-
 #~ msgid "Empty layers around bottom are replaced by nearest normal layers."
 #~ msgstr ""
 #~ "Порожні шари навколо дна замінюються найближчими нормальними шарами."
--- a/localization/i18n/zh_CN/OrcaSlicer_zh_CN.po
+++ b/localization/i18n/zh_CN/OrcaSlicer_zh_CN.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Slic3rPE\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-11-04 14:18+0800\n"
+"POT-Creation-Date: 2023-11-10 14:54+0800\n"
 "PO-Revision-Date: 2023-04-01 13:21+0800\n"
 "Last-Translator: SoftFever <softfeverever@gmail.com>\n"
 "Language-Team: \n"
@@ -491,27 +491,12 @@ msgstr "Z缝绘制"
 msgid "Remove selection"
 msgstr "移除绘制"

-msgid "Shift + Mouse move up or dowm"
-msgstr "Shift + 鼠标上移或下移"
-
-msgid "Rotate text"
-msgstr "旋转文字"
-
-msgid "Text shape"
-msgstr "文本形状"
-
 msgid "Font"
 msgstr "字体"

 msgid "Thickness"
 msgstr "厚度"

-msgid "Input text"
-msgstr "输入文本"
-
-msgid "Embeded"
-msgstr "嵌入的"
-
 msgid "Text Gap"
 msgstr "文字间距"

@@ -523,12 +508,24 @@ msgid ""
 "depth"
 msgstr "内嵌深度"

+msgid "Input text"
+msgstr "输入文本"
+
 msgid "Surface"
 msgstr "附着曲面"

 msgid "Horizontal text"
 msgstr "水平文字"

+msgid "Shift + Mouse move up or dowm"
+msgstr "Shift + 鼠标上移或下移"
+
+msgid "Rotate text"
+msgstr "旋转文字"
+
+msgid "Text shape"
+msgstr "文本形状"
+
 msgid "Ctrl+"
 msgstr ""

@@ -614,12 +611,6 @@ msgstr ""
 msgid "WebView2 Runtime"
 msgstr "WebView2 运行库"

-msgid ""
-"OrcaSlicer configuration file may be corrupted and is not abled to be parsed."
-"Please delete the file and try again."
-msgstr ""
-"OrcaSlicer 配置文件可能已损坏而无法解析。请删除此文件并重新启动OrcaSlicer。"
-
 #, c-format, boost-format
 msgid ""
 "%s\n"
@@ -645,6 +636,13 @@ msgstr "已经是最新版本。"
 msgid "Info"
 msgstr "信息"

+msgid ""
+"The OrcaSlicer configuration file may be corrupted and cannot be parsed.\n"
+"OrcaSlicer has attempted to recreate the configuration file.\n"
+"Please note, application settings will be lost, but printer profiles will "
+"not be affected."
+msgstr ""
+
 msgid "Rebuild"
 msgstr "重新构建"

@@ -5925,6 +5923,9 @@ msgstr "延时摄影G-code"
 msgid "Change filament G-code"
 msgstr "耗材丝更换G-code"

+msgid "Change extrusion role G-code"
+msgstr ""
+
 msgid "Pause G-code"
 msgstr "暂停 G-code"

@@ -7636,6 +7637,14 @@ msgstr "所有打印结束时的结尾G-code"
 msgid "End G-code when finish the printing of this filament"
 msgstr "结束使用该耗材打印时的结尾G-code"

+msgid "Ensure vertical shell thickness"
+msgstr "确保垂直外壳厚度"
+
+msgid ""
+"Add solid infill near sloping surfaces to guarantee the vertical shell "
+"thickness (top+bottom solid layers)"
+msgstr "在斜面表面附近添加实心填充，以保证垂直外壳厚度（顶部+底部实心层）"
+
 msgid "Top surface pattern"
 msgstr "顶面图案"

@@ -9796,6 +9805,9 @@ msgid ""
 "tool change"
 msgstr "换料时插入的G-code，包括T命令。"

+msgid "This gcode is inserted when the extrusion role is changed"
+msgstr ""
+
 msgid ""
 "Line width for top surfaces. If expressed as a %, it will be computed over "
 "the nozzle diameter."
@@ -10141,6 +10153,17 @@ msgstr ""
 "用于替换模型细小特征（根据最小特征尺寸）的墙线宽。如果墙最小线宽小于最小特征"
 "的厚度，则墙将变得和特征本身一样厚。参数值表示为相对喷嘴直径的百分比"

+msgid "Detect narrow internal solid infill"
+msgstr "识别狭窄内部实心填充"
+
+msgid ""
+"This option will auto detect narrow internal solid infill area. If enabled, "
+"concentric pattern will be used for the area to speed printing up. "
+"Otherwise, rectilinear pattern is used defaultly."
+msgstr ""
+"此选项用于自动识别内部狭窄的实心填充。开启后，将对狭窄实心区域使用同心填充加"
+"快打印速度。否则使用默认的直线填充。"
+
 msgid "invalid value "
 msgstr "非法的值 "

@@ -11522,6 +11545,16 @@ msgid ""
 "temperature. More info about this in the Wiki."
 msgstr ""

+#~ msgid "Embeded"
+#~ msgstr "嵌入的"
+
+#~ msgid ""
+#~ "OrcaSlicer configuration file may be corrupted and is not abled to be "
+#~ "parsed.Please delete the file and try again."
+#~ msgstr ""
+#~ "OrcaSlicer 配置文件可能已损坏而无法解析。请删除此文件并重新启动"
+#~ "OrcaSlicer。"
+
 #~ msgid "Online Models"
 #~ msgstr "在线模型"

@@ -11567,14 +11600,6 @@ msgstr ""
 #~ msgid "Activate for better air filtration"
 #~ msgstr "激活以获得更好的空气过滤"

-#~ msgid "Ensure vertical shell thickness"
-#~ msgstr "确保垂直外壳厚度"
-
-#~ msgid ""
-#~ "Add solid infill near sloping surfaces to guarantee the vertical shell "
-#~ "thickness (top+bottom solid layers)"
-#~ msgstr "在斜面表面附近添加实心填充，以保证垂直外壳厚度（顶部+底部实心层）"
-
 #~ msgid "Temperature of vitrificaiton"
 #~ msgstr "软化温度"

@@ -11601,17 +11626,6 @@ msgstr ""
 #~ "辅助部件冷却风扇的转速。辅助部件冷却风扇将一直运行在该速度，除了设置的无需"
 #~ "冷却的前若干层"

-#~ msgid "Detect narrow internal solid infill"
-#~ msgstr "识别狭窄内部实心填充"
-
-#~ msgid ""
-#~ "This option will auto detect narrow internal solid infill area. If "
-#~ "enabled, concentric pattern will be used for the area to speed printing "
-#~ "up. Otherwise, rectilinear pattern is used defaultly."
-#~ msgstr ""
-#~ "此选项用于自动识别内部狭窄的实心填充。开启后，将对狭窄实心区域使用同心填充"
-#~ "加快打印速度。否则使用默认的直线填充。"
-
 #~ msgid ""
 #~ "Filter out gaps smaller than the threshold specified. This setting won't "
 #~ "affect top/bottom layers"
--- a/localization/i18n/zh_TW/OrcaSlicer_zh_TW.po
+++ b/localization/i18n/zh_TW/OrcaSlicer_zh_TW.po
--- a/resources/profiles/Anker.json
+++ b/resources/profiles/Anker.json
@@ -1,6 +1,6 @@
 {
    "name": "Anker",
-    "version": "01.06.04.00",
+    "version": "01.08.00.00",
    "force_update": "0",
    "description": "Anker configurations",
    "machine_model_list": [
--- a/resources/profiles/Anker/machine/Anker
+++ b/resources/profiles/Anker/machine/Anker
@@ -8,5 +8,8 @@
    "bed_model": "M5-CE-bed.stl",
    "bed_texture": "M5-CE-texture.svg",
    "hotend_model": "",
-    "default_materials": "Anker Generic ABS;Anker Generic PLA;Anker Generic PLA-CF;Anker Generic PETG;Anker Generic TPU;Anker Generic ASA;Anker Generic PVA"
+    "default_materials": "Anker Generic ABS;Anker Generic PLA;Anker Generic PLA-CF;Anker Generic PETG;Anker Generic TPU;Anker Generic ASA;Anker Generic PVA",
+    "retraction_length": [
+        "1.5"
+    ]
 }
--- a/resources/profiles/Anker/machine/Anker
+++ b/resources/profiles/Anker/machine/Anker
@@ -8,5 +8,8 @@
    "bed_model": "M5C-CE-bed.stl",
    "bed_texture": "M5-CE-texture.svg",
    "hotend_model": "",
-    "default_materials": "Anker Generic ABS;Anker Generic PLA;Anker Generic PLA-CF;Anker Generic PETG;Anker Generic TPU;Anker Generic ASA;Anker Generic PVA;Anker Generic PC;Anker Generic PA;Anker Generic PA-CF"
+    "default_materials": "Anker Generic ABS;Anker Generic PLA;Anker Generic PLA-CF;Anker Generic PETG;Anker Generic TPU;Anker Generic ASA;Anker Generic PVA;Anker Generic PC;Anker Generic PA;Anker Generic PA-CF",
+    "retraction_length": [
+        "0.8"
+    ]
 }
--- a/resources/profiles/Anker/machine/fdm_machine_common.json
+++ b/resources/profiles/Anker/machine/fdm_machine_common.json
@@ -3,7 +3,7 @@
    "name": "fdm_machine_common",
    "from": "system",
    "instantiation": "false",
-    "gcode_flavor": "marlin",
+    "gcode_flavor": "marlin2",
   	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n",
    "machine_start_gcode": "M4899 T3 ; Enable v3 jerk and S-curve acceleration \nM104 Sfirst_layer_temperature[0] ; Set hotend temp\nM190 S{first_layer_bed_temperature[0]} ; set and wait for bed temp to stabilize\nM109 S{first_layer_temperature[0]} ; set final nozzle temp to stabilize\nG28 ;Home",
    "machine_end_gcode": "M104 S0\nM140 S0\n;Retract the filament\nG92 E1\nG1 E-1 F300\nG28 X0 Y0\nM84",
@@ -88,9 +88,6 @@
    "retract_when_changing_layer": [
        "0"
    ],
-    "retraction_length": [
-        "1.5"
-    ],
    "retract_length_toolchange": [
        "2"
    ],
--- a/resources/profiles/Anycubic.json
+++ b/resources/profiles/Anycubic.json
@@ -1,6 +1,6 @@
 {
    "name": "Anycubic",
-    "version": "01.06.00.00",
+    "version": "01.08.00.00",
    "force_update": "0",
    "description": "Anycubic configurations",
    "machine_model_list": [
--- a/resources/profiles/Anycubic/process/0.15mm
+++ b/resources/profiles/Anycubic/process/0.15mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Anycubic/process/0.15mm
+++ b/resources/profiles/Anycubic/process/0.15mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Anycubic/process/0.15mm
+++ b/resources/profiles/Anycubic/process/0.15mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Anycubic/process/0.15mm
+++ b/resources/profiles/Anycubic/process/0.15mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Anycubic/process/0.15mm
+++ b/resources/profiles/Anycubic/process/0.15mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Anycubic/process/0.15mm
+++ b/resources/profiles/Anycubic/process/0.15mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Anycubic/process/0.20mm
+++ b/resources/profiles/Anycubic/process/0.20mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Anycubic/process/0.20mm
+++ b/resources/profiles/Anycubic/process/0.20mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Anycubic/process/0.20mm
+++ b/resources/profiles/Anycubic/process/0.20mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Anycubic/process/0.20mm
+++ b/resources/profiles/Anycubic/process/0.20mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Anycubic/process/0.20mm
+++ b/resources/profiles/Anycubic/process/0.20mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Anycubic/process/0.20mm
+++ b/resources/profiles/Anycubic/process/0.20mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Anycubic/process/0.30mm
+++ b/resources/profiles/Anycubic/process/0.30mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Anycubic/process/0.30mm
+++ b/resources/profiles/Anycubic/process/0.30mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Anycubic/process/0.30mm
+++ b/resources/profiles/Anycubic/process/0.30mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Anycubic/process/0.30mm
+++ b/resources/profiles/Anycubic/process/0.30mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Anycubic/process/0.30mm
+++ b/resources/profiles/Anycubic/process/0.30mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Anycubic/process/0.30mm
+++ b/resources/profiles/Anycubic/process/0.30mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Anycubic/process/fdm_process_common.json
+++ b/resources/profiles/Anycubic/process/fdm_process_common.json
@@ -41,7 +41,7 @@
    "ironing_speed": "30",
    "ironing_type": "no ironing",
    "reduce_infill_retraction": "1",
-    "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
    "detect_overhang_wall": "1",
    "overhang_1_4_speed": "0",
    "overhang_2_4_speed": "50",
--- a/resources/profiles/Artillery.json
+++ b/resources/profiles/Artillery.json
@@ -1,6 +1,6 @@
 {
    "name": "Artillery",
-    "version": "01.06.04.00",
+    "version": "01.08.00.00",
    "force_update": "0",
    "description": "Artillery configurations",
    "machine_model_list": [
--- a/resources/profiles/Artillery/process/0.15mm
+++ b/resources/profiles/Artillery/process/0.15mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Artillery/process/0.16mm
+++ b/resources/profiles/Artillery/process/0.16mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Artillery/process/0.16mm
+++ b/resources/profiles/Artillery/process/0.16mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Artillery/process/0.20mm
+++ b/resources/profiles/Artillery/process/0.20mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Artillery/process/0.20mm
+++ b/resources/profiles/Artillery/process/0.20mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Artillery/process/0.20mm
+++ b/resources/profiles/Artillery/process/0.20mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Artillery/process/0.20mm
+++ b/resources/profiles/Artillery/process/0.20mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Artillery/process/0.24mm
+++ b/resources/profiles/Artillery/process/0.24mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Artillery/process/0.24mm
+++ b/resources/profiles/Artillery/process/0.24mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Artillery/process/0.25mm
+++ b/resources/profiles/Artillery/process/0.25mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Artillery/process/fdm_process_common.json
+++ b/resources/profiles/Artillery/process/fdm_process_common.json
@@ -41,7 +41,7 @@
    "ironing_speed": "30",
    "ironing_type": "no ironing",
    "reduce_infill_retraction": "1",
-    "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
    "detect_overhang_wall": "1",
    "overhang_1_4_speed": "0",
    "overhang_2_4_speed": "50",
--- a/resources/profiles/BBL.json
+++ b/resources/profiles/BBL.json
@@ -1,7 +1,7 @@
 {
    "name": "Bambulab",
    "url": "http://www.bambulab.com/Parameters/vendor/BBL.json",
-    "version": "01.07.00.29",
+    "version": "01.07.00.30",
    "force_update": "0",
    "description": "the initial version of BBL configurations",
    "machine_model_list": [
--- a/resources/profiles/BBL/filament/fdm_filament_abs.json
+++ b/resources/profiles/BBL/filament/fdm_filament_abs.json
@@ -5,7 +5,7 @@
    "from": "system",
    "instantiation": "false",
    "activate_air_filtration": [
-        "1"
+        "0"
    ],
    "cool_plate_temp": [
        "0"
--- a/resources/profiles/BBL/filament/fdm_filament_asa.json
+++ b/resources/profiles/BBL/filament/fdm_filament_asa.json
@@ -5,7 +5,7 @@
    "from": "system",
    "instantiation": "false",
    "activate_air_filtration": [
-        "1"
+        "0"
    ],
    "cool_plate_temp": [
        "0"
--- a/resources/profiles/BBL/process/fdm_process_bbl_common.json
+++ b/resources/profiles/BBL/process/fdm_process_bbl_common.json
@@ -29,7 +29,7 @@
    "ironing_type": "no ironing",
    "layer_height": "0.2",
    "reduce_infill_retraction": "1",
-    "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
    "detect_overhang_wall": "1",
    "overhang_1_4_speed": "0",
    "overhang_2_4_speed": "50",
--- a/resources/profiles/BIQU.json
+++ b/resources/profiles/BIQU.json
@@ -1,6 +1,6 @@
 {
    "name": "BIQU",
-    "version": "01.06.00.00",
+    "version": "01.08.00.00",
    "force_update": "0",
    "description": "BIQU configurations",
    "machine_model_list": [
--- a/resources/profiles/BIQU/machine/BIQU
+++ b/resources/profiles/BIQU/machine/BIQU
@@ -81,6 +81,6 @@
 "retraction_speed": [
    "70"
 ],
-"machine_start_gcode": "; BIQU B1 Start G-code\nM117 Getting the bed up to temp!\nM140 S{material_bed_temperature_layer_0}; Set Heat Bed temperature\nM190 S{material_bed_temperature_layer_0}; Wait for Heat Bed temperature\nM117 Getting the extruder up to temp!\nM104 S{material_print_temperature_layer_0}; Set Extruder temperature\nG92 E0; Reset Extruder\nM117 Homing axes\nG28; Home all axes\nM109 S{material_print_temperature_layer_0}; Wait for Extruder temperature\nG1 Z2.0 F3000; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X4.1 Y20 Z0.3 F5000.0; Move to start position\nM117 Purging\nG1 X4.1 Y200.0 Z0.3 F1500.0 E15; Draw the first line\nG1 X4.4 Y200.0 Z0.3 F5000.0; Move to side a little\nG1 X4.4 Y20 Z0.3 F1500.0 E30; Draw the second line\nG92 E0; Reset Extruder\nM117 Lets make\nG1 Z2.0 F3000; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.3 F5000.0; Move over to prevent blob squish",
-"machine_end_gcode": ";BIQU B1 Default End Gcode\nG91;Relative positioning\nG1 E-2 F2700;Retract a bit\nG1 E-2 Z0.2 F2400;Retract a bit more and raise Z\nG1 X5 Y5 F3000;Wipe out\nG1 Z10;Raise Z by 10mm\nG90;Return to absolute positioning\nG1 X0 Y{machine_depth};\nM106 S0;Turn-off fan\nM104 S0;Turn-off hotend\nM140 S0;Turn-off bed\nM84 X Y E;Disable all steppers but Z"
+"machine_start_gcode": "; BIQU B1 Start G-code\nM117 Getting the bed up to temp!\nM140 S[first_layer_bed_temperature]; Set Heat Bed temperature\nM190 S[first_layer_bed_temperature]; Wait for Heat Bed temperature\nM117 Getting the extruder up to temp!\nM104 S[first_layer_temperature]; Set Extruder temperature\nG92 E0; Reset Extruder\nM117 Homing axes\nG28; Home all axes\nM109 S[first_layer_temperature]; Wait for Extruder temperature\nG1 Z2.0 F3000; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X4.1 Y20 Z0.3 F5000.0; Move to start position\nM117 Purging\nG1 X4.1 Y200.0 Z0.3 F1500.0 E15; Draw the first line\nG1 X4.4 Y200.0 Z0.3 F5000.0; Move to side a little\nG1 X4.4 Y20 Z0.3 F1500.0 E30; Draw the second line\nG92 E0; Reset Extruder\nM117 Lets make\nG1 Z2.0 F3000; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.3 F5000.0; Move over to prevent blob squish",
+"machine_end_gcode": ";BIQU B1 Default End Gcode\nG91;Relative positioning\nG1 E-2 F2700;Retract a bit\nG1 E-2 Z0.2 F2400;Retract a bit more and raise Z\nG1 X5 Y5 F3000;Wipe out\nG1 Z10;Raise Z by 10mm\nG90;Return to absolute positioning\nG1 X0 Y{print_bed_max[1]};\nM106 S0;Turn-off fan\nM104 S0;Turn-off hotend\nM140 S0;Turn-off bed\nM84 X Y E;Disable all steppers but Z"
 }
--- a/resources/profiles/BIQU/machine/BIQU
+++ b/resources/profiles/BIQU/machine/BIQU
@@ -81,6 +81,6 @@
 "retraction_speed": [
    "40"
 ],
-"machine_start_gcode": "; BIQU BX Start G-code\n;M117 Initial homing sequence; Home so that the probe is positioned to heat\nG28\nM117 Probe heating position\nG0 X65 Y5 Z1; Move the probe to the heating position.\nM117 Getting the heaters up to temp!\nM104 S140; Set Extruder temperature, no wait\nM140 S60; Set Heat Bed temperature\nM190 S60; Wait for Heat Bed temperature\nM117 Waiting for probe to warm; Wait another 90s for the probe to absorb heat.\nG4 S90\nM117 Post warming re-home\nG28; Home all axes again after warming\nM117 Z-Dance of my people\nG34\nM117 ABL Probing\nG29\nM900 K0 L0 T0;Edit the K and L values if you have calibrated a k factor for your filament\nM900 T0 S0\nG1 Z2.0 F3000; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X4.1 Y10 Z0.3 F5000.0; Move to start position\nM117 Getting the extruder up to temp\nM140 S{material_bed_temperature_layer_0}; Set Heat Bed temperature\nM104 S{material_print_temperature_layer_0}; Set Extruder temperature\nM109 S{material_print_temperature_layer_0}; Wait for Extruder temperature\nM190 S{material_bed_temperature_layer_0}; Wait for Heat Bed temperature\nG92 E0; Reset Extruder\nM117 Purging\nG1 X4.1 Y200.0 Z0.3 F1500.0 E15; Draw the first line\nG1 X4.4 Y200.0 Z0.3 F5000.0; Move to side a little\nG1 X4.4 Y20 Z0.3 F1500.0 E30; Draw the second line\nG92 E0; Reset Extruder\nM117 Lets make\nG1 X8 Y20 Z0.3 F5000.0; Move over to prevent blob squish",
-"machine_end_gcode": "; BIQU BX Default End Gcode\nG91;Relative positioning\nG1 E-2 F2700;Retract a bit\nG1 E-2 Z0.2 F2400;Retract a bit more and raise Z\nG1 X5 Y5 F3000;Wipe out\nG1 Z10;Raise Z by 10mm\nG90;Return to absolute positioning\nG1 X0 Y{machine_depth};TaDaaaa\nM106 S0;Turn-off fan\nM104 S0;Turn-off hotend\nM140 S0;Turn-off bed\nM84 X Y E;Disable all steppers but Z"
+"machine_start_gcode": "; BIQU BX Start G-code\n;M117 Initial homing sequence; Home so that the probe is positioned to heat\nG28\nM117 Probe heating position\nG0 X65 Y5 Z1; Move the probe to the heating position.\nM117 Getting the heaters up to temp!\nM104 S140; Set Extruder temperature, no wait\nM140 S60; Set Heat Bed temperature\nM190 S60; Wait for Heat Bed temperature\nM117 Waiting for probe to warm; Wait another 90s for the probe to absorb heat.\nG4 S90\nM117 Post warming re-home\nG28; Home all axes again after warming\nM117 Z-Dance of my people\nG34\nM117 ABL Probing\nG29\nM900 K0 L0 T0;Edit the K and L values if you have calibrated a k factor for your filament\nM900 T0 S0\nG1 Z2.0 F3000; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X4.1 Y10 Z0.3 F5000.0; Move to start position\nM117 Getting the extruder up to temp\nM140 S[first_layer_bed_temperature]; Set Heat Bed temperature\nM104 S[first_layer_temperature]; Set Extruder temperature\nM109 S[first_layer_temperature]; Wait for Extruder temperature\nM190 S[first_layer_bed_temperature]; Wait for Heat Bed temperature\nG92 E0; Reset Extruder\nM117 Purging\nG1 X4.1 Y200.0 Z0.3 F1500.0 E15; Draw the first line\nG1 X4.4 Y200.0 Z0.3 F5000.0; Move to side a little\nG1 X4.4 Y20 Z0.3 F1500.0 E30; Draw the second line\nG92 E0; Reset Extruder\nM117 Lets make\nG1 X8 Y20 Z0.3 F5000.0; Move over to prevent blob squish",
+"machine_end_gcode": "; BIQU BX Default End Gcode\nG91;Relative positioning\nG1 E-2 F2700;Retract a bit\nG1 E-2 Z0.2 F2400;Retract a bit more and raise Z\nG1 X5 Y5 F3000;Wipe out\nG1 Z10;Raise Z by 10mm\nG90;Return to absolute positioning\nG1 X0 Y{print_bed_max[1]};TaDaaaa\nM106 S0;Turn-off fan\nM104 S0;Turn-off hotend\nM140 S0;Turn-off bed\nM84 X Y E;Disable all steppers but Z"
 }
--- a/resources/profiles/BIQU/process/fdm_process_biqu_common.json
+++ b/resources/profiles/BIQU/process/fdm_process_biqu_common.json
@@ -43,7 +43,7 @@
    "ironing_type": "no ironing",
    "layer_height": "0.2",
    "reduce_infill_retraction": "1",
-    "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
    "detect_overhang_wall": "1",
    "overhang_1_4_speed": "0",
    "overhang_2_4_speed": "20",
--- a/resources/profiles/BIQU/process/fdm_process_hurakan_common.json
+++ b/resources/profiles/BIQU/process/fdm_process_hurakan_common.json
@@ -43,7 +43,7 @@
    "ironing_type": "no ironing",
    "layer_height": "0.2",
    "reduce_infill_retraction": "1",
-    "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
    "detect_overhang_wall": "1",
    "overhang_1_4_speed": "0",
    "overhang_2_4_speed": "20",
--- a/resources/profiles/Comgrow.json
+++ b/resources/profiles/Comgrow.json
@@ -1,6 +1,6 @@
 {
 	"name": "Comgrow",
-	"version": "01.07.00.00",
+	"version": "01.08.00.00",
 	"force_update": "0",
 	"description": "Comgrow configurations",
 	"machine_model_list": [
--- a/resources/profiles/Creality.json
+++ b/resources/profiles/Creality.json
@@ -1,6 +1,6 @@
 {
 	"name": "Creality",
-	"version": "01.07.00.00",
+	"version": "01.08.00.00",
 	"force_update": "0",
 	"description": "Creality configurations",
 	"machine_model_list": [
--- a/resources/profiles/Creality/machine/Creality
+++ b/resources/profiles/Creality/machine/Creality
@@ -8,5 +8,5 @@
    "bed_model": "creality_k1max_buildplate_model.stl",
    "bed_texture": "creality_k1max_buildplate_texture.png",
    "hotend_model": "",
-    "default_materials": "Creality Generic PLA @0.4 nozzle;Creality HF Generic PLA @0.4 nozzle;Creality HF Generic Speed PLA @0.4 nozzle;Creality Generic PETG @0.4 nozzle;Creality Generic TPU @0.4 nozzle;Creality Generic ABS @0.4 nozzle;Creality Generic PLA @0.6 nozzle;Creality HF Generic PLA @0.6 nozzle;Creality HF Generic Speed PLA @0.6 nozzle;Creality Generic PETG @0.6 nozzle;Creality Generic TPU @0.6 nozzle;Creality Generic ABS @0.6 nozzle;Creality Generic PLA @0.8 nozzle;Creality HF Generic PLA @0.8 nozzle;Creality HF Generic Speed PLA @0.8 nozzle;Creality Generic PETG @0.8 nozzle;Creality Generic TPU @0.8 nozzle;Creality Generic ABS @0.8 nozzle"
+    "default_materials": "Creality Generic PLA;Creality HF Generic PLA;Creality HF Generic Speed PLA;Creality Generic PETG;Creality Generic TPU;Creality Generic ABS"
 }
--- a/resources/profiles/Creality/machine/Creality
+++ b/resources/profiles/Creality/machine/Creality
@@ -8,5 +8,5 @@
    "bed_model": "creality_k1_buildplate_model.stl",
    "bed_texture": "creality_k1_buildplate_texture.png",
    "hotend_model": "",
-    "default_materials": "Creality Generic PLA @0.4 nozzle;Creality HF Generic PLA @0.4 nozzle;Creality HF Generic Speed PLA @0.4 nozzle;Creality Generic PETG @0.4 nozzle;Creality Generic TPU @0.4 nozzle;Creality Generic ABS @0.4 nozzle;Creality Generic PLA @0.6 nozzle;Creality HF Generic PLA @0.6 nozzle;Creality HF Generic Speed PLA @0.6 nozzle;Creality Generic PETG @0.6 nozzle;Creality Generic TPU @0.6 nozzle;Creality Generic ABS @0.6 nozzle;Creality Generic PLA @0.8 nozzle;Creality HF Generic PLA @0.8 nozzle;Creality HF Generic Speed PLA @0.8 nozzle;Creality Generic PETG @0.8 nozzle;Creality Generic TPU @0.8 nozzle;Creality Generic ABS @0.8 nozzle"
+    "default_materials": "Creality Generic PLA;Creality HF Generic PLA;Creality HF Generic Speed PLA;Creality Generic PETG;Creality Generic TPU;Creality Generic ABS"
 }
--- a/resources/profiles/Creality/process/0.12mm
+++ b/resources/profiles/Creality/process/0.12mm
@@ -44,7 +44,7 @@
    "ironing_type": "no ironing",
    "layer_height": "0.12",
    "reduce_infill_retraction": "1",
-    "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
    "detect_overhang_wall": "1",
    "overhang_1_4_speed": "0",
    "overhang_2_4_speed": "20",
--- a/resources/profiles/Creality/process/0.12mm
+++ b/resources/profiles/Creality/process/0.12mm
@@ -44,7 +44,7 @@
    "ironing_type": "no ironing",
    "layer_height": "0.12",
    "reduce_infill_retraction": "1",
-    "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
    "detect_overhang_wall": "1",
    "overhang_1_4_speed": "0",
    "overhang_2_4_speed": "20",
--- a/resources/profiles/Creality/process/0.12mm
+++ b/resources/profiles/Creality/process/0.12mm
@@ -44,7 +44,7 @@
    "ironing_type": "no ironing",
    "layer_height": "0.12",
    "reduce_infill_retraction": "1",
-    "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
    "detect_overhang_wall": "1",
    "overhang_1_4_speed": "0",
    "overhang_2_4_speed": "20",
--- a/resources/profiles/Creality/process/0.15mm
+++ b/resources/profiles/Creality/process/0.15mm
@@ -44,7 +44,7 @@
    "ironing_type": "no ironing",
    "layer_height": "0.15",
    "reduce_infill_retraction": "1",
-    "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
    "detect_overhang_wall": "1",
    "overhang_1_4_speed": "0",
    "overhang_2_4_speed": "20",
--- a/resources/profiles/Creality/process/0.15mm
+++ b/resources/profiles/Creality/process/0.15mm
@@ -44,7 +44,7 @@
    "ironing_type": "no ironing",
    "layer_height": "0.15",
    "reduce_infill_retraction": "1",
-    "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
    "detect_overhang_wall": "1",
    "overhang_1_4_speed": "0",
    "overhang_2_4_speed": "20",
--- a/resources/profiles/Creality/process/0.15mm
+++ b/resources/profiles/Creality/process/0.15mm
@@ -44,7 +44,7 @@
    "ironing_type": "no ironing",
    "layer_height": "0.15",
    "reduce_infill_retraction": "1",
-    "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
    "detect_overhang_wall": "1",
    "overhang_1_4_speed": "0",
    "overhang_2_4_speed": "20",
--- a/resources/profiles/Creality/process/0.16mm
+++ b/resources/profiles/Creality/process/0.16mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Creality/process/0.16mm
+++ b/resources/profiles/Creality/process/0.16mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Creality/process/0.16mm
+++ b/resources/profiles/Creality/process/0.16mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Creality/process/0.16mm
+++ b/resources/profiles/Creality/process/0.16mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Creality/process/0.16mm
+++ b/resources/profiles/Creality/process/0.16mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Creality/process/0.16mm
+++ b/resources/profiles/Creality/process/0.16mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Creality/process/0.16mm
+++ b/resources/profiles/Creality/process/0.16mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Creality/process/0.16mm
+++ b/resources/profiles/Creality/process/0.16mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Creality/process/0.16mm
+++ b/resources/profiles/Creality/process/0.16mm
@@ -51,7 +51,7 @@
    "ironing_type": "no ironing",
    "layer_height": "0.16",
    "reduce_infill_retraction": "1",
-    "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
    "detect_overhang_wall": "1",
    "overhang_1_4_speed": "0",
    "overhang_2_4_speed": "50",
--- a/resources/profiles/Creality/process/0.16mm
+++ b/resources/profiles/Creality/process/0.16mm
@@ -49,7 +49,7 @@
    "ironing_type": "no ironing",
    "layer_height": "0.16",
    "reduce_infill_retraction": "1",
-    "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
    "detect_overhang_wall": "1",
    "overhang_1_4_speed": "0",
    "overhang_2_4_speed": "50",
--- a/resources/profiles/Creality/process/0.20mm
+++ b/resources/profiles/Creality/process/0.20mm
@@ -44,7 +44,7 @@
    "ironing_type": "no ironing",
    "layer_height": "0.2",
    "reduce_infill_retraction": "1",
-    "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
    "detect_overhang_wall": "1",
    "overhang_1_4_speed": "0",
    "overhang_2_4_speed": "20",
--- a/resources/profiles/Creality/process/0.20mm
+++ b/resources/profiles/Creality/process/0.20mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Creality/process/0.20mm
+++ b/resources/profiles/Creality/process/0.20mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Creality/process/0.20mm
+++ b/resources/profiles/Creality/process/0.20mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Creality/process/0.20mm
+++ b/resources/profiles/Creality/process/0.20mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Creality/process/0.20mm
+++ b/resources/profiles/Creality/process/0.20mm
@@ -44,7 +44,7 @@
    "ironing_type": "no ironing",
    "layer_height": "0.2",
    "reduce_infill_retraction": "1",
-    "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
    "detect_overhang_wall": "1",
    "overhang_1_4_speed": "0",
    "overhang_2_4_speed": "20",
--- a/resources/profiles/Creality/process/0.20mm
+++ b/resources/profiles/Creality/process/0.20mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Creality/process/0.20mm
+++ b/resources/profiles/Creality/process/0.20mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Creality/process/0.20mm
+++ b/resources/profiles/Creality/process/0.20mm
@@ -44,7 +44,7 @@
    "ironing_type": "no ironing",
    "layer_height": "0.2",
    "reduce_infill_retraction": "1",
-    "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
    "detect_overhang_wall": "1",
    "overhang_1_4_speed": "0",
    "overhang_2_4_speed": "20",
--- a/resources/profiles/Creality/process/0.20mm
+++ b/resources/profiles/Creality/process/0.20mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Creality/process/0.20mm
+++ b/resources/profiles/Creality/process/0.20mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Creality/process/0.20mm
+++ b/resources/profiles/Creality/process/0.20mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
SoftFever	f5ec607b6a	update WIKI	2023-11-17 20:00:12 +08:00
SoftFever	cb038d0469	fix Prusa MK3S and Mini profile issues Fixed #2768	2023-11-17 20:00:05 +08:00
mariuske	698440d5a4	Removed print_flow_ratio from Flashforge process (#2769 ) For some reason this value stayed in this profile file after a recent merge and it's now been removed again.	2023-11-17 19:40:03 +08:00
Noisyfox	b2642039c7	Fix creality k1/max default materials (#2609 ) (#2767 )	2023-11-17 14:28:48 +08:00
SVNMLR	4dcfd97181	[Multi Material] Fix first layers of prime tower when using "no sparse layers" (#2764 ) * MM - Add check for first layer * Change: If no sparse layer is on -> Respect the toolchange in the first-layer checkup, to use a brim and slow down printspeed if using a primetower * Fix comment	2023-11-17 08:01:52 +08:00
SoftFever	9505f93717	fix thumbnails regression	2023-11-17 07:54:59 +08:00
SoftFever	bc05653a72	orca bot: processing issues in ascending order	2023-11-16 23:25:28 +08:00
SoftFever	9af22da7d1	bump version to 1.8	2023-11-16 23:17:59 +08:00
SoftFever	09c77c45da	update profile version to 1.08.00.00	2023-11-16 23:02:10 +08:00
mariuske	6c957d40d0	Restructured Flashforge process profiles (#2718 ) * Restructured Flashforge process profiles * Fixed typo in machine profiles * Changed skirt loops to 2 Based on best practise (other profiles), I have changed the number of skirt loops from 1 to 2	2023-11-16 22:07:02 +08:00
Andy	75c019a1a9	Russian translation update (#2760 ) Russian translation update	2023-11-16 22:02:13 +08:00
SoftFever	7566df566d	fix snapmaker J1 not displaying bug fixed #2750	2023-11-16 19:42:40 +08:00
Noisyfox	2fc5a7d01e	Fix layer height modifier layout (#2708 ) (#2756 )	2023-11-16 19:15:37 +08:00
SoftFever	565732a027	remove print_flow_ratio from profiles and hide it from process setting. It should be only displayed for parts	2023-11-16 19:07:40 +08:00
FlyingbearOfficial	e8ac1575e7	Flyingbear official patch 9 (#2746 ) * Add a new brand named Flyingbear Add a new brand named Flyingbear Model name: Flyingbear Reborn3 * Update fdm_machine_common.json fix z_hop 0,2(2) * make bed model smaller and set default internal_solid_infill_pattern to monotonic --------- Co-authored-by: SoftFever <softfeverever@gmail.com>	2023-11-16 18:46:32 +08:00
Fabio Forcina	24ae038e0e	Italian translation (#2706 ) * Update OrcaSlicer_it.po * Italian translation Italian translation * fix errors --------- Co-authored-by: SoftFever <softfeverever@gmail.com>	2023-11-16 18:18:50 +08:00
Exerqtor	f61c504696	Fix for QOI thumbnails not working (#2755 ) Fix for QOI not working Should remidy the issues in https://github.com/SoftFever/OrcaSlicer/issues/2741	2023-11-16 18:13:08 +08:00
SoftFever	bbdd580bb1	fix wipe tower bug: filament end inserted twice	2023-11-16 01:00:59 +08:00
SoftFever	930e1b3bdf	limit max wipe tower speed to 90 mm/s	2023-11-16 00:59:45 +08:00
SoftFever	cf4aceec79	remove filament_max_volumetric_speed cap	2023-11-15 19:03:16 +08:00
Noisyfox	016d3a74eb	Improve Windows crash log (#2736 ) * Show RVA of each call stack so we can locate the symbol with pdb file * CI upload pdb file	2023-11-15 19:00:55 +08:00
Olcay ÖREN	3f3bd08a70	Update OrcaSlicer_tr.po (#2742 ) * Update OrcaSlicer_tr.po Missing fields in Turkish are filled in and word errors are improved. * Update OrcaSlicer_tr.po Editing the missing and incorrect parts in the Turkish language file. * Update OrcaSlicer_tr.po Editing the missing and incorrect parts in the Turkish language file. * Update OrcaSlicer_tr.po The bug on line 6082 has been fixed. * Update OrcaSlicer_tr.po character fixes	2023-11-15 18:56:21 +08:00
Hotsolidinfill	dcddf9974a	Update translation Korean (#2731 ) update translation korean	2023-11-14 17:16:00 +08:00
Noisyfox	b1a164b67f	Fix scaling of `min_width_top_surface` when using abs value (#2725 )	2023-11-14 17:15:29 +08:00
SoftFever	4754b38afa	diable activate_air_filtration by default for ABS/ASA	2023-11-13 22:31:06 +08:00
SoftFever	5213fbfa86	Support initial_tool variable for filename format	2023-11-13 22:25:32 +08:00
Hukete	c03d58318a	Update fdm_process_qidi_x3_common.json 11/13 (#2717 ) * 10-25 Add TPU-95A HF * 1030 Adding Introduction of Chamber Temperature Control Macros(M191) to Notes * 1102 Add ABS-GF10 profile， Remove a extra "s" from the "0.36mm Standard @Qidi XPlus3 0.6 nozzle.json" file * 1106 Add the PA value to some genetic filament profiles * Update fdm_filament_pla.json Change the fan rate of begin layers * Update fdm_process_qidi_x3_common.json Reduction of top surface particles * Update fdm_process_qidi_x3_common.json Add M140 S90 to M191 macro, Preventing slow chamber warming in cold winter environments	2023-11-13 22:22:21 +08:00
SoftFever	60424baac0	Fix draft_shield error for MK3S profile Fixed #2660	2023-11-12 23:31:18 +08:00
SoftFever	9731ea3277	update chamber temperature WIKI	2023-11-12 22:10:10 +08:00
SoftFever	b1c325a419	bump version to 1.8.0-rc2	2023-11-12 10:28:32 +08:00
SoftFever	50f776fe6b	fixed an issue when purge_in_prime_tower is disabled for non bbl printers	2023-11-12 09:52:07 +08:00
SoftFever	15358b211d	Fix a regression issue that retraction is not correct when wipe is off Fix #2697	2023-11-12 09:52:07 +08:00
mariuske	da4e7817a8	Enable skirt for Flashforge process profiles (#2695 ) Activate skirt for Flashforge profiles	2023-11-12 09:51:32 +08:00
Carlos Caruncho	153cba58e5	Update Spanish translation (#2696 ) * Update OrcaSlicer_es.po * Update OrcaSlicer_es.po * Update OrcaSlicer_es.po * Revert "Merge remote-tracking branch 'upstream/main' into spanish_translation" This reverts commit `694a900845`, reversing changes made to `4f53ce4f88`. * Revert "Update OrcaSlicer_es.po" This reverts commit `4f53ce4f88`. * Revert "Revert "Update OrcaSlicer_es.po"" This reverts commit `53bd15617c`. * Update OrcaSlicer_es.po * Update OrcaSlicer_es.po * Update OrcaSlicer_es.po * Revert "Update OrcaSlicer_es.po" This reverts commit `b21aad079f`. * Update OrcaSlicer_es.po * Update OrcaSlicer_es.po * Update OrcaSlicer_es.po * Update OrcaSlicer_es.po * Update OrcaSlicer_en.po * Update OrcaSlicer_es.po --------- Co-authored-by: SoftFever <softfeverever@gmail.com>	2023-11-12 09:49:05 +08:00
SoftFever	4f48afd6fe	update WIKI for exhuast/auxiliar fan and active chamber temperature features	2023-11-11 23:30:54 +08:00
Noisyfox	4e5e5a7ae8	Fix min brush size when using scroll wheel (#2534 ) (#2693 )	2023-11-11 15:15:57 +08:00
Noisyfox	714667ee1c	Add search printer model in Setup wizard (#2692 ) Add search printer model in Setup wizard (#2563) Adopted from #2464 Co-authored-by: ZdDroid <601865048@qq.com>	2023-11-11 15:13:24 +08:00
renemosner	de35ff9a6c	Update CZ (#2688 )	2023-11-11 08:58:32 +08:00
SoftFever	1e040f2fc3	bump version to 1.8.0-rc	2023-11-10 21:13:27 +08:00
Heiko Liebscher	09b84a0850	fix de language new feature (#2686 ) fix de	2023-11-10 20:52:21 +08:00
Hukete	4645943360	Update fdm_process_qidi_x3_common.json (#2683 ) * 10-25 Add TPU-95A HF * 1030 Adding Introduction of Chamber Temperature Control Macros(M191) to Notes * 1102 Add ABS-GF10 profile， Remove a extra "s" from the "0.36mm Standard @Qidi XPlus3 0.6 nozzle.json" file * 1106 Add the PA value to some genetic filament profiles * Update fdm_filament_pla.json Change the fan rate of begin layers * Update fdm_process_qidi_x3_common.json Reduction of top surface particles	2023-11-10 20:51:44 +08:00
SoftFever	c860680b21	Fixed a issue that support_bottom_z_distance was not working as expected. Fixed #2667	2023-11-10 19:46:01 +08:00
SoftFever	edb5676dd1	Fixed a bug that filament start gcode was inserted twice when wipe tower is enabled fixed #2673	2023-11-10 18:00:56 +08:00
SoftFever	109176864e	Update locale	2023-11-10 18:00:29 +08:00
SoftFever	c5a10b302a	fix Voron profiles	2023-11-10 18:00:09 +08:00
Jeff Papiez	466a17b8b4	Adding additional configurations for Voron Trident, V0, and Switchwiare (#2672 ) * Updating voron profiles * Add missing V0 configs and add default print profiles * Update nozzle_diameter for v0, switchwire, and triedent * Correcting names, nozzle diameters, and adding missing min and max layer heights	2023-11-10 10:19:48 +08:00
Ocraftyone	120a3576a0	SS port - Change extrusion role gcode (#2459 ) implement custom gcode for when the extrusion role is changed Co-authored-by: supermerill <merill@free.fr>	2023-11-09 22:30:30 +08:00
renemosner	1b53d1b72d	Update OrcaSlicer_cs.po (#2670 )	2023-11-09 22:24:49 +08:00
niklasb	2203131211	Fix: Height range Modifier translation in German #2613 (#2668 ) Update OrcaSlicer_de.po	2023-11-09 22:23:43 +08:00
Noisyfox	97502df924	Fix cli segfault (#2661 ) (#2665 )	2023-11-09 22:22:43 +08:00
Noisyfox	f16feff2a4	Fixes scars on thing walls when "avoid crossing wall" is turned on (#2659 ) * Travel very close to the inner holes, could cross external perimeter when the avoid crossing perimeters was enabled. (cherry picked from commit prusa3d/PrusaSlicer@6c51e5148c) * Modified variable offset in the avoid crossing perimeters to not cause scars on thin objects (#7699). Previously, the minimum contour width was chosen too conservative and, on some thin objects, only allowed minimal (or non) offset. This could result in travels being planned along the outer perimeter. Now, the minimum contour width is chosen much smaller at the start and tested if the variable offset wasn't failed (the outer contour broke up into more parts, more or fewer holes, etc.). If any problem is detected, the variable offset is recalculated with a larger minimum contour width. (cherry picked from commit prusa3d/PrusaSlicer@dc00f0bf98) --------- Co-authored-by: Lukáš Hejl <hejl.lukas@gmail.com>	2023-11-09 22:21:44 +08:00
Hukete	333287535b	Update fdm_filament_pla.json (#2657 ) * 10-25 Add TPU-95A HF * 1030 Adding Introduction of Chamber Temperature Control Macros(M191) to Notes * 1102 Add ABS-GF10 profile， Remove a extra "s" from the "0.36mm Standard @Qidi XPlus3 0.6 nozzle.json" file * 1106 Add the PA value to some genetic filament profiles * Update fdm_filament_pla.json Change the fan rate of begin layers	2023-11-09 22:20:14 +08:00
Noisyfox	cd8f555714	Fix some gui issues (#2653 ) * Fix text gizmo input dialog caption alignment * Fix issue that layer slider top/bottom label left edge been cut by draw region (#2603)	2023-11-09 22:19:40 +08:00
SoftFever	22abe8cc9d	Automatically recover from corrupted config file	2023-11-09 22:09:41 +08:00
SoftFever	df0a49a73d	Fix retraction issues	2023-11-09 20:54:33 +08:00
SoftFever	2d849fec6c	update locale	2023-11-07 21:37:07 +08:00
SoftFever	42f8efc0d8	Fixed a regression that checking new version didn't work Fixed #2622	2023-11-07 21:32:36 +08:00
SoftFever	e001b66192	Fixed a regression that bed type was not remembered and switched when switching bed types	2023-11-07 18:36:20 +08:00
SoftFever	132e531fb8	Misc profiles fixes fixed #2636	2023-11-07 18:34:44 +08:00
Geoffrey Ward	94e35737e6	Update the retraction defaults to account for the M5c (#2640 ) * Remove retraction_length from common M5c should never retract more then 0.8mm or it will clog * Preserve M5 retraction length Moved previous retraction length from core to M5 * Update Anker M5C retraction length to prevent clogs Anything beyond a 0.8mm retraction length will clog the printer over time.	2023-11-07 18:14:21 +08:00
Geoffrey Ward	472821922a	Update AnkerMake printers to make use of Marlin 2 gcode (#2639 )	2023-11-07 18:13:38 +08:00
ablegods	9c34a8c082	Update OrcaSlicer_zh_TW.po (#2630 ) * Update OrcaSlicer_zh_TW.po * update locale for 1.8 beta2 Following the version update of 1.8 beta2, new localizations will be added * Update OrcaSlicer_zh_TW.po * Update OrcaSlicer_zh_TW.po fixed some conflict	2023-11-07 18:13:07 +08:00
mariuske	70f28ba3c1	Adjusted Flashforge machine profiles (#2632 ) * Added correct machine pause code for FlashForge printers Added machine pause code for Flashforge printers to support pause action in firmware 2.3.6-2.1.9-20231101 * Removed redundant gcodes for Flashforge profiles Removed redundant gcodes for Flashforge profiles as they are already added by Orca Slicer	2023-11-07 13:10:16 +08:00
FlashforgeOfficial	5788fd30e7	1106 Flashforge: Update TPU, classic mode change etc. (#2627 ) Co-authored-by: SoftFever <softfeverever@gmail.com>	2023-11-07 13:09:30 +08:00
Noisyfox	c0a8f430f8	Add back the option to disable `ensure vertical shell thickness` and `detect narrow internal solid infill` (#2626 ) * Add back the option to disable `ensure vertical shell thickness` (#2602) * Add back the option to disable `detect narrow internal solid infill` (#2623)	2023-11-06 23:21:07 +08:00
SoftFever	9f599cd51f	Fixed #2537 : pa pattern issues on delta printers	2023-11-06 23:02:40 +08:00
Hukete	bea9b54689	Update profiles for Qidi printers (#2629 ) * 10-25 Add TPU-95A HF * 1030 Adding Introduction of Chamber Temperature Control Macros(M191) to Notes * 1102 Add ABS-GF10 profile， Remove a extra "s" from the "0.36mm Standard @Qidi XPlus3 0.6 nozzle.json" file * 1106 Add the PA value to some genetic filament profiles * Update fdm_process_qidi_x3_common.json The macro code cant add to the bottom of the printer.cfg	2023-11-06 21:57:24 +08:00
SoftFever	4eae93080f	Fix vector too long issues	2023-11-06 18:32:19 +08:00
SoftFever	fcc4b03054	small_perimeter_speed shouldn't be 0	2023-11-06 18:31:31 +08:00
SoftFever	c24648d470	Update orca_bot.yml	2023-11-06 14:20:04 +08:00
SoftFever	129547f2ce	Update orca_bot.yml	2023-11-06 14:19:13 +08:00
SoftFever	e018e0ade0	Update orca_bot.yml (#2625 ) increase operations-per-run to 3000	2023-11-06 13:36:16 +08:00
SoftFever	7510eb6f72	Update orca_bot.yml	2023-11-06 13:07:30 +08:00
SoftFever	efaf2f8e34	Add orca bot	2023-11-05 21:42:50 +08:00
ablegods	35f65893f8	Update OrcaSlicer_zh_TW.po (#2607 )	2023-11-05 13:32:21 +08:00