Keep the Segment-Based Voronoi Reproducers

The gapfill, weirdness and NaN reproducers go through Orca's repairing VoronoiDiagram once they use it instead of raw boost, so they are converted rather than deleted. Only the two point-input reproducers, which the wrapper neither checks nor repairs, are removed.

.claude/skills/orca-wxwidgets/references/platforms.md

@@ -569,12 +569,19 @@ on the **first** call. So:
 #endif
 ```
 
-**Before GTK starts**, only the environment exists. `CLI::run` (`src/OrcaSlicer.cpp`) branches on
-`GDK_BACKEND` (an `x11` prefix means the X11 opt-in). On the default path it forces `GDK_BACKEND=x11`
-when wx lacks EGL and `WAYLAND_DISPLAY` is set. It sets `WEBKIT_DISABLE_COMPOSITING_MODE=1`
-(non-replacing) only when both `DISPLAY` and `WAYLAND_DISPLAY` are set, and calls `XInitThreads()`
+**Before GTK starts**, only the environment exists. `CLI::run` (`src/OrcaSlicer.cpp`) sets the NVIDIA
+DMABUF workaround and then branches on `GDK_BACKEND` (an `x11` prefix means the X11 opt-in). On both
+paths, when `/proc/driver/nvidia/version` exists and the linked WebKitGTK honours the switch (>= 2.44,
+`WebView::SupportsForceSharedMemory()`), it sets `WEBKIT_DMABUF_RENDERER_FORCE_SHM=1` and
+`WEBKIT_FORCE_DMABUF_RENDERER=1` (non-replacing): the proprietary driver cannot back WebKit's hardware
+DMABUF renderer. On a hypervisor guest (`/proc/cpuinfo` `hypervisor` flag) and WebKitGTK >= 2.44 it sets
+`WEBKIT_DMABUF_RENDERER_FORCE_SHM=1` alone, since virtual GPUs cannot back the hardware path either. On the default path it forces `GDK_BACKEND=x11` when wx lacks EGL and `WAYLAND_DISPLAY`
+is set, and sets `WEBKIT_DISABLE_COMPOSITING_MODE=1` (non-replacing) inside that branch when the linked
+WebKitGTK is older than 2.42: a forced X11 backend in a Wayland session is the only default-path case
+that runs through XWayland, which `DISPLAY` and `WAYLAND_DISPLAY` alone do not tell you (a native
+Wayland app inherits both). It calls `XInitThreads()`
 only when `DISPLAY` is set. With neither variable set, the GUI refuses to start ("Neither DISPLAY nor
-WAYLAND_DISPLAY set"). The details and the WebKit rule (c12912e0df) are in
+WAYLAND_DISPLAY set"). The details and the WebKit rules (c12912e0df) are in
 `references/webview-gl-aui-media.md` §WebKitGTK on Linux sessions.
 
 **wx's own detectors**, for reference:

.claude/skills/orca-wxwidgets/references/webview-gl-aui-media.md

@@ -61,7 +61,8 @@ available; GTK2/WebKit1 is an opt-out configuration the GUI does not support.
 11. A web host that re-themes in place handles `EVT_WEBVIEW_RECREATED` without `Skip()`; one that
     needs a reload lets it through. §[Orca wrapper](#orca-webview-wrapper-widgetswebview)
 12. Keep `WebViewWebKit`'s destructor removing the `"wx"` handler. §[Orca wrapper](#orca-webview-wrapper-widgetswebview)
-13. Do not widen `WEBKIT_DISABLE_COMPOSITING_MODE` beyond Orca's default-path XWayland case, and never
+13. Do not widen `WEBKIT_DISABLE_COMPOSITING_MODE` beyond the no-EGL default path where Orca forces
+    `GDK_BACKEND=x11`, for WebKitGTK older than 2.42, and never
     make a page's progress depend only on a C++→JS callback. §[WebKitGTK on Linux](#webkitgtk-on-linux-sessions)
 14. GL attribute lists: legacy `int[]` lists end with `0` and spell out `WX_GL_RGBA` and
     `WX_GL_DOUBLEBUFFER`; `wxGLAttributes`/`wxGLContextAttrs` end with `EndList()`; MSAA is requested
@@ -567,33 +568,74 @@ vue-resize workaround script and sets a persistent SQLite cookie store on the vi
 ## WebKitGTK on Linux sessions
 
 **Mechanism.** `CLI::run` (`src/OrcaSlicer.cpp`, under `#ifdef __WXGTK__`, before GTK initialises)
-branches on `GDK_BACKEND`:
+sets the DMABUF workarounds and then branches on `GDK_BACKEND`:
+- **Both paths**, before the split: when `/proc/driver/nvidia/version` exists and the linked WebKitGTK
+  honours the switch (>= 2.44, `WebView::SupportsForceSharedMemory()`), it sets
+  `WEBKIT_DMABUF_RENDERER_FORCE_SHM=1` and `WEBKIT_FORCE_DMABUF_RENDERER=1` non-replacing. The
+  proprietary driver cannot back WebKit's hardware DMABUF renderer, so the shared-memory transport keeps
+  accelerated compositing instead of dropping it; `WEBKIT_FORCE_DMABUF_RENDERER` clears the
+  Debian/Ubuntu/openSUSE `isNVIDIA()` early return, which otherwise returns before the FORCE_SHM check.
+- **Hypervisor guests**, same position: when `is_hypervisor_guest()` (the `hypervisor` flag in
+  `/proc/cpuinfo`) and WebKitGTK >= 2.44, it sets `WEBKIT_DMABUF_RENDERER_FORCE_SHM=1` non-replacing.
+  Virtual GPUs (VirtualBox VMSVGA, VMware, QEMU) cannot back the hardware DMABUF path either, and
+  FORCE_SHM alone was confirmed to fix web views in VirtualBox; the `WEBKIT_FORCE_DMABUF_RENDERER` pair
+  is not needed without the Debian `isNVIDIA()` patch. The flag is x86-only, so ARM guests are not covered.
 - **Default path** (`GDK_BACKEND` unset or not starting with `x11`): if wx lacks EGL (`!wxHAS_EGL`) and
-  `WAYLAND_DISPLAY` is set, it forces `GDK_BACKEND=x11`; it sets `WEBKIT_DISABLE_COMPOSITING_MODE=1`
-  non-replacing **only** when both `DISPLAY` and `WAYLAND_DISPLAY` are non-empty (a Wayland session with
-  XWayland available — the session, not the backend GTK will pick); `XInitThreads()` runs only when
-  `DISPLAY` is set.
+  `WAYLAND_DISPLAY` is set, it forces `GDK_BACKEND=x11`, and in that same branch it sets
+  `WEBKIT_DISABLE_COMPOSITING_MODE=1` non-replacing when the linked WebKitGTK predates 2.42
+  (`WebView::NeedsCompositingWorkaround()`). That forced X11 backend in a Wayland session is the only
+  default-path case that really runs through XWayland; `DISPLAY` and `WAYLAND_DISPLAY` alone do not
+  identify it, because a native Wayland app inherits both. `XInitThreads()` runs only when `DISPLAY` is
+  set.
 - **`GDK_BACKEND=x11…` opt-in path**: sets `DRI_PRIME=1` (and the NVIDIA PRIME variables when
   `/proc/driver/nvidia/version` exists), calls `XInitThreads()`, and deliberately does **not** disable
-  compositing (the comment: the WebKit2GTK XWayland bug appears fixed in WebKit2GTK ≥ 2.42, and leaving
-  compositing on keeps hardware acceleration for Device / Setup Wizard / login pages).
+  compositing, which keeps hardware acceleration for Device / Setup Wizard / login pages.
 
 Runtime backend detection elsewhere uses Orca's `is_running_on_wayland()` / `is_running_on_x11()`
 (see `references/platforms.md`), not these environment variables.
 
 **Pitfall.**
-- **Rule:** Set `WEBKIT_DISABLE_COMPOSITING_MODE` only on the default path in Wayland sessions,
-  non-replacing (`setenv(..., false)`, so a value the user already exported wins), before GTK
-  initialises; never unconditionally. Keep JS-side fallbacks so a page never
+- **Rule:** On NVIDIA and hypervisor guests reach for `WEBKIT_DMABUF_RENDERER_FORCE_SHM` before
+  `WEBKIT_DISABLE_COMPOSITING_MODE`. **Why:** the proprietary driver and virtual GPUs cannot back WebKit's
+  hardware DMABUF renderer, leaving web views blank or slow; FORCE_SHM keeps accelerated compositing and only
+  skips the hardware path, while disabling compositing drops it. Threaded scrolling is a separate,
+  release-dependent default (off in 2.44/2.45, on from 2.46). `WEBKIT_DISABLE_DMABUF_RENDERER` is not a
+  substitute — it is read first, leaves the transport set empty (no compositing from 2.44 on, where the
+  X11/Wayland fallback renderers were removed) and has a reported crash path. On Debian/Ubuntu and
+  openSUSE the `isNVIDIA()` patch returns before the FORCE_SHM check, so `WEBKIT_FORCE_DMABUF_RENDERER=1`
+  must clear it first; that variable exists only in those patches. WebKit reads all of these once per
+  process, before the first WebView.
+  The test is `/proc/driver/nvidia/version`, so a hybrid laptop that renders on its iGPU also takes the
+  shared-memory path, which is a per-frame GPU readback rather than zero-copy; exporting
+  `WEBKIT_DMABUF_RENDERER_FORCE_SHM=0` in the environment restores the hardware path.
+  ```cpp
+  // Wrong: kills compositing and threaded scrolling (and can crash on modern WebKit)
+  ::setenv("WEBKIT_DISABLE_DMABUF_RENDERER", "1", false);
+  // Right: keep compositing, skip only the hardware DMABUF path
+  if (::access("/proc/driver/nvidia/version", F_OK) == 0 && WebView::SupportsForceSharedMemory()) {
+      ::setenv("WEBKIT_DMABUF_RENDERER_FORCE_SHM", "1", /*replace*/ false);
+      ::setenv("WEBKIT_FORCE_DMABUF_RENDERER", "1", /*replace*/ false);
+  }
+  ```
+  Cite: WebKit 2.52.6 `Source/WebKit/UIProcess/gtk/AcceleratedBackingStore.cpp`
+  (`rendererBufferTransportMode()`), Debian `disable-nvidia-dmabuf.patch`, WebKit bug 262607.
+- **Rule:** Set `WEBKIT_DISABLE_COMPOSITING_MODE` only on the default path, in the branch where wx
+  lacks EGL and Orca forces `GDK_BACKEND=x11`, non-replacing (`setenv(..., false)`, so a value the user
+  already exported wins), before GTK
+  initialises; never unconditionally, and only for the WebKitGTK releases that need it (older than
+  2.42, `WebView::NeedsCompositingWorkaround()`). Keep JS-side fallbacks so a page never
   waits forever for a C++→JS call.
-  **Why:** WebKit2GTK accelerated compositing could fail silently under XWayland, leaving web views
-  blank (Setup Wizard stuck on "Loading..."); disabling it everywhere needlessly drops hardware
-  acceleration; without the JS timeout the user is stuck when the signal is lost.
+  **Why:** WebKit2GTK accelerated compositing could fail silently under XWayland before 2.42, leaving
+  web views blank (Setup Wizard stuck on "Loading..."); the variable also turns off threaded scrolling,
+  so applying it on a newer WebKit needlessly drops both GPU compositing and async scrolling (the
+  Device tab loses its smoothness); without the JS timeout the user is stuck when the signal is lost.
   ```cpp
   // Wrong: unconditional, kills HW acceleration everywhere
   ::setenv("WEBKIT_DISABLE_COMPOSITING_MODE", "1", false);
-  // Right (default path only): non-replacing, before GTK init, Wayland session with XWayland
-  if (display && *display && wayland && *wayland)
+  // Right (default path only): non-replacing, before GTK init, WebKitGTK < 2.42,
+  // and only in the branch that forces GDK_BACKEND=x11 (wx without EGL), the
+  // case that runs through XWayland
+  if (WebView::NeedsCompositingWorkaround() && wayland && *wayland)
       ::setenv("WEBKIT_DISABLE_COMPOSITING_MODE", "1", /*replace*/ false);
   ```
   Cite: c12912e0df (`src/OrcaSlicer.cpp`; `resources/web/guide/0/load.js` `OnInit`

.github/workflows/check_profiles.yml

@@ -232,6 +232,31 @@ jobs:
           mkdir -p ${{ runner.temp }}/profile-check-results
           echo "${{ github.event.pull_request.number }}" > ${{ runner.temp }}/profile-check-results/pr_number.txt
 
+      # Builds a readable diff of the custom G-code the PR changes, which GitHub shows as
+      # one long line per setting, for check_profiles_comment.yml to post.
+      - name: Diff custom G-code
+        if: ${{ always() && github.event_name == 'pull_request' }}
+        continue-on-error: true
+        env:
+          PR_HEAD_SHA: ${{ github.event.pull_request.head.sha }}
+        run: |
+          git fetch --no-tags --depth=2 origin "$(git rev-parse HEAD)"
+          results=${{ runner.temp }}/profile-check-results
+          diff=${{ runner.temp }}/gcode_diff.md
+          # HEAD is the PR's merge commit, so HEAD^1 is the base it merges onto.
+          python3 ./scripts/orca_profile_tool.py gcode-diff --base HEAD^1 --head HEAD > "$diff"
+          if [ -s "$diff" ]; then
+            {
+              echo "<!-- profile-gcode-diff-comment -->"
+              cat "$diff"
+              echo ""
+              # The comment workflow finds this line as the only one starting with <sub>.
+              echo "<sub>For commit ${PR_HEAD_SHA} of this PR.</sub>"
+            } > "$results/gcode_diff.md"
+          fi
+          # Tells the comment workflow that a missing gcode_diff.md means no G-code changed.
+          touch "$results/gcode_diff_done.txt"
+
       - name: Prepare comment artifact
         if: ${{ always() && github.event_name == 'pull_request' && (steps.profile_tool.outcome == 'failure' || steps.legacy_compat.outcome == 'failure' || steps.validate_system.outcome == 'failure' || steps.validate_slice.outcome == 'failure' || steps.validate_filament_subtypes.outcome == 'failure' || steps.validate_custom.outcome == 'failure') }}
         run: |

.github/workflows/check_profiles_comment.yml

@@ -38,6 +38,7 @@ jobs:
         env:
           GH_TOKEN: ${{ github.token }}
           GH_REPO: ${{ github.repository }}
+          HEAD_SHA: ${{ github.event.workflow_run.head_sha }}
         run: |
           if [ ! -f pr_number.txt ]; then
             echo "No pr_number.txt in artifact, skipping."
@@ -49,18 +50,72 @@ jobs:
             echo "Invalid PR number: $PR_NUMBER"
             exit 1
           fi
+          # PR code wrote the artifact, so only a run for the named PR's current head may post.
+          if [ -z "$HEAD_SHA" ]; then
+            echo "The triggering run names no head commit."
+            exit 1
+          fi
+          if ! PR_HEAD=$(gh api "repos/${GH_REPO}/pulls/${PR_NUMBER}" --jq .head.sha); then
+            echo "Cannot look up PR #${PR_NUMBER}."
+            exit 1
+          fi
+          if [ "$HEAD_SHA" != "$PR_HEAD" ]; then
+            echo "${HEAD_SHA} is not the head of PR #${PR_NUMBER}; skipping."
+            exit 0
+          fi
+
+          # Lists every bot comment on the PR, one JSON object per line.
+          COMMENTS=$(gh api --paginate "repos/${GH_REPO}/issues/${PR_NUMBER}/comments" \
+            --jq '.[] | select(.user.login == "github-actions[bot]") | {id, body} | @json')
 
           # Delete prior comments matching the marker (from check_profiles.yml) or the legacy heading.
-          OLD_IDS=$(gh api --paginate "repos/${GH_REPO}/issues/${PR_NUMBER}/comments" \
-            --jq '.[] | select(.user.login == "github-actions[bot]") | select((.body | startswith("<!-- profile-validation-comment -->")) or (.body | startswith("## :x: Profile Validation Errors"))) | .id')
+          OLD_IDS=$(printf '%s\n' "$COMMENTS" | jq -r 'select((.body | startswith("<!-- profile-validation-comment -->")) or (.body | startswith("## :x: Profile Validation Errors"))) | .id')
           for comment_id in $OLD_IDS; do
             echo "Deleting outdated profile-validation comment ${comment_id}"
             gh api -X DELETE "repos/${GH_REPO}/issues/comments/${comment_id}" || true
           done
 
           # Post a new comment only when validation failed (pr_comment.md present).
+          # A failed post fails the job only after the G-code diff is handled.
+          failed=0
           if [ -f pr_comment.md ]; then
-            gh pr comment "$PR_NUMBER" --body-file pr_comment.md
+            gh pr comment "$PR_NUMBER" --body-file pr_comment.md || failed=1
           else
             echo "Validation succeeded; cleaned up prior comments without posting."
           fi
+
+          # Makes the G-code diff comment match gcode_diff.md, or deletes it if there is none.
+          update_gcode_diff_comment() {
+            if [ ! -f gcode_diff_done.txt ]; then
+              echo "The G-code diff step did not finish; leaving any G-code diff comment as it is."
+              return 0
+            fi
+            GCODE_IDS=$(printf '%s\n' "$COMMENTS" | jq -r 'select(.body | startswith("<!-- profile-gcode-diff-comment -->")) | .id')
+            if [ -f gcode_diff.md ] && [ "$(wc -c < gcode_diff.md)" -gt 65536 ]; then
+              echo "gcode_diff.md is over GitHub's comment limit; not posting it."
+              rm gcode_diff.md
+            fi
+            if [ -f gcode_diff.md ] && [ "$(echo "$GCODE_IDS" | wc -w)" -eq 1 ]; then
+              OLD_BODY=$(printf '%s\n' "$COMMENTS" | jq -r --argjson id "$GCODE_IDS" 'select(.id == $id) | .body' | tr -d '\r')
+              NEW_BODY=$(tr -d '\r' < gcode_diff.md)
+              if [ "$OLD_BODY" = "$NEW_BODY" ]; then
+                echo "G-code diff unchanged; keeping comment ${GCODE_IDS}."
+                return 0
+              fi
+              # Edits in place when only the <sub> line differs, since edits notify nobody.
+              if [ "$(grep -v '^<sub>' <<< "$OLD_BODY")" = "$(grep -v '^<sub>' <<< "$NEW_BODY")" ]; then
+                echo "G-code diff unchanged at a new commit; updating comment ${GCODE_IDS}."
+                gh api -X PATCH "repos/${GH_REPO}/issues/comments/${GCODE_IDS}" -F body=@gcode_diff.md > /dev/null
+                return 0
+              fi
+            fi
+            for comment_id in $GCODE_IDS; do
+              echo "Deleting outdated G-code diff comment ${comment_id}"
+              gh api -X DELETE "repos/${GH_REPO}/issues/comments/${comment_id}" || true
+            done
+            if [ -f gcode_diff.md ]; then
+              gh pr comment "$PR_NUMBER" --body-file gcode_diff.md
+            fi
+          }
+          update_gcode_diff_comment
+          exit "$failed"

CMakeLists.txt

@@ -288,6 +288,19 @@ if (APPLE)
     # Type"); Ninja/-Wall does not, and under -Werror it fails Xcode builds on code CI accepts.
     set(CMAKE_XCODE_ATTRIBUTE_GCC_WARN_64_TO_32_BIT_CONVERSION "NO")
 
+    # The Xcode generator ignores CMAKE_<LANG>_COMPILER_LAUNCHER, so hand the launcher to
+    # Xcode's own Compiler Launcher setting, which wraps every clang compile (C, C++,
+    # Objective-C++ and the precompiled header) with one program: the C++ launcher wins when
+    # both are set. The setting takes a single program path, not a CMake launcher list.
+    # Xcode versions without it ignore it and build uncached.
+    if (CMAKE_GENERATOR STREQUAL "Xcode")
+        if (CMAKE_CXX_COMPILER_LAUNCHER)
+            set(CMAKE_XCODE_ATTRIBUTE_C_COMPILER_LAUNCHER "${CMAKE_CXX_COMPILER_LAUNCHER}")
+        elseif (CMAKE_C_COMPILER_LAUNCHER)
+            set(CMAKE_XCODE_ATTRIBUTE_C_COMPILER_LAUNCHER "${CMAKE_C_COMPILER_LAUNCHER}")
+        endif ()
+    endif ()
+
     message(STATUS "Orca: IS_CROSS_COMPILE: ${IS_CROSS_COMPILE}")
 elseif (CMAKE_SYSTEM_NAME STREQUAL "Linux")
     set(CMAKE_INSTALL_RPATH "$ORIGIN")

build_linux.sh

@@ -22,7 +22,7 @@ function usage() {
     echo "   -g: run the requested build steps inside a Docker/Podman Ubuntu 24.04 container similar to the GitHub Actions Linux runner"
     echo "   -h: prints this help text"
     echo "   -i: build the Orca Slicer AppImage (optional)"
-    echo "   -p: boost ccache hit rate by disabling precompiled headers (default: ON)"
+    echo "   -p: disable precompiled headers (on by default): more ccache hits after header changes, slower misses"
     echo "   -r: skip RAM and disk checks (low RAM compiling)"
     echo "   -s: build the Orca Slicer (optional)"
     echo "   -t: build tests (optional), requires -s flag"
@@ -549,6 +549,20 @@ fi
 if [ -n "${CMAKE_CCACHE}" ] ; then
     echo "${CMAKE_CCACHE} found, enabling compiler caching..."
     export CMAKE_CCACHE_ARGS=(-DCMAKE_C_COMPILER_LAUNCHER="${CMAKE_CCACHE}" -DCMAKE_CXX_COMPILER_LAUNCHER="${CMAKE_CCACHE}")
+    # The same ccache settings as the CI build. Without this sloppiness ccache refuses every
+    # compile that uses the precompiled header, which is most of OrcaSlicer, and skips headers
+    # a checkout has just written. It is added to the sloppiness already configured, and
+    # CCACHE_SLOPPINESS or CCACHE_(NO)DEPEND set in the environment win.
+    if [[ "$(basename "${CMAKE_CCACHE}")" == ccache ]] ; then
+        if [[ -z "${CCACHE_SLOPPINESS+x}" ]] ; then
+            CCACHE_SLOPPINESS=$("${CMAKE_CCACHE}" --get-config sloppiness 2>/dev/null || true)
+            export CCACHE_SLOPPINESS="${CCACHE_SLOPPINESS:+${CCACHE_SLOPPINESS},}pch_defines,time_macros,include_file_mtime,include_file_ctime"
+        fi
+        # Hash the includes the compiler reports instead of preprocessing every miss.
+        if [[ -z "${CCACHE_DEPEND+x}${CCACHE_NODEPEND+x}" ]] ; then
+            export CCACHE_DEPEND=1
+        fi
+    fi
 else
     echo "Note: ccache or sccache are not found. Install either of them for faster rebuilds."
 fi

build_release_macos.sh

@@ -111,6 +111,54 @@ else
   export CMAKE_POLICY_COMPAT=""
 fi
 
+# Compiler cache, as in build_linux.sh. The program comes from CMAKE_CCACHE, else from a
+# launcher already set in the environment (the CI build sets ccache there), else sccache or
+# ccache from PATH; one program serves both languages. Each run applies its own choice to the
+# build directories, replacing a launcher an earlier run or a hand-run configure recorded.
+CMAKE_CCACHE_ARGS=()
+CCACHE_VAR=""
+for var in CMAKE_CCACHE CMAKE_CXX_COMPILER_LAUNCHER CMAKE_C_COMPILER_LAUNCHER; do
+    if [ -n "${!var:-}" ]; then
+        CCACHE_VAR=$var
+        break
+    fi
+done
+if [ -n "$CCACHE_VAR" ]; then
+    CCACHE_PROGRAM=${!CCACHE_VAR}
+    echo "Checking ${CCACHE_VAR} environment variable for compiler cache program..."
+    CMAKE_CCACHE=$(command -v "${CCACHE_PROGRAM}") || {
+        echo "${CCACHE_VAR} environment variable is set to '${CCACHE_PROGRAM}' but it was not found in PATH."
+        CMAKE_CCACHE=""
+    }
+elif command -v sccache >/dev/null 2>&1 ; then
+    CMAKE_CCACHE=$(command -v sccache)
+elif command -v ccache >/dev/null 2>&1 ; then
+    CMAKE_CCACHE=$(command -v ccache)
+fi
+if [ -n "${CMAKE_CCACHE}" ] ; then
+    echo "${CMAKE_CCACHE} found, enabling compiler caching..."
+    CMAKE_CCACHE_ARGS=(-DCMAKE_C_COMPILER_LAUNCHER="${CMAKE_CCACHE}" -DCMAKE_CXX_COMPILER_LAUNCHER="${CMAKE_CCACHE}")
+    # The same ccache settings as the CI build. Without this sloppiness ccache refuses every
+    # compile that uses the precompiled header, which is most of OrcaSlicer, and skips headers
+    # a checkout has just written. It is added to the sloppiness already configured, and
+    # CCACHE_SLOPPINESS or CCACHE_(NO)DEPEND set in the environment win.
+    if [[ "$(basename "${CMAKE_CCACHE}")" == ccache ]] ; then
+        if [[ -z "${CCACHE_SLOPPINESS+x}" ]] ; then
+            CCACHE_SLOPPINESS=$("${CMAKE_CCACHE}" --get-config sloppiness 2>/dev/null || true)
+            export CCACHE_SLOPPINESS="${CCACHE_SLOPPINESS:+${CCACHE_SLOPPINESS},}pch_defines,time_macros,include_file_mtime,include_file_ctime"
+        fi
+        # Hash the includes the compiler reports instead of preprocessing every miss.
+        if [[ -z "${CCACHE_DEPEND+x}${CCACHE_NODEPEND+x}" ]] ; then
+            export CCACHE_DEPEND=1
+        fi
+    fi
+else
+    echo "Note: ccache or sccache are not found. Install either of them for faster rebuilds."
+    # Clear a launcher recorded by an earlier configure. The entries must be set empty rather
+    # than removed: CMake fills a missing launcher entry from the environment.
+    CMAKE_CCACHE_ARGS=(-DCMAKE_C_COMPILER_LAUNCHER:STRING= -DCMAKE_CXX_COMPILER_LAUNCHER:STRING=)
+fi
+
 echo "Build params:"
 echo " - ARCH: $ARCH"
 echo " - BUILD_CONFIG: $BUILD_CONFIG"
@@ -162,6 +210,7 @@ function build_deps() {
                         -DCMAKE_OSX_ARCHITECTURES:STRING="${_ARCH}" \
                         -DCMAKE_OSX_DEPLOYMENT_TARGET="${OSX_DEPLOYMENT_TARGET}" \
                         -DCMAKE_IGNORE_PREFIX_PATH="${CMAKE_IGNORE_PREFIX_PATH}" \
+                        "${CMAKE_CCACHE_ARGS[@]}" \
                         ${CMAKE_POLICY_COMPAT}
                 fi
                 cmake --build . --config "$BUILD_CONFIG" --target deps
@@ -264,6 +313,7 @@ function build_slicer() {
                     -DCMAKE_OSX_ARCHITECTURES="${_ARCH}" \
                     -DCMAKE_OSX_DEPLOYMENT_TARGET="${OSX_DEPLOYMENT_TARGET}" \
                     -DCMAKE_IGNORE_PREFIX_PATH="${CMAKE_IGNORE_PREFIX_PATH}" \
+                    "${CMAKE_CCACHE_ARGS[@]}" \
                     ${CMAKE_POLICY_COMPAT}
             fi
             cmake --build . --config "$BUILD_CONFIG" --target "$SLICER_BUILD_TARGET"

deps/JPEG/JPEG.cmake

@@ -1,22 +1,7 @@
-if(CMAKE_SYSTEM_NAME STREQUAL "Linux")
-    if (JPEG_VERSION STREQUAL "6")
-        message("Using Jpeg Lib 62")
-        set(jpeg_flag "")
-    elseif (JPEG_VERSION STREQUAL "7")
-        message("Using Jpeg Lib 70")
-        set(jpeg_flag "-DWITH_JPEG7=ON")
-    else ()
-        message("Using Jpeg Lib 80")
-        set(jpeg_flag "-DWITH_JPEG8=ON")
-    endif ()
-endif()
-
 orcaslicer_add_cmake_project(JPEG
-    URL https://github.com/libjpeg-turbo/libjpeg-turbo/archive/refs/tags/3.0.1.zip
-    URL_HASH SHA256=d6d99e693366bc03897677650e8b2dfa76b5d6c54e2c9e70c03f0af821b0a52f
-    DEPENDS ${ZLIB_PKG}
+    URL https://github.com/libjpeg-turbo/libjpeg-turbo/archive/refs/tags/3.2.0.zip
+    URL_HASH SHA256=1b4c2cb6cba1ca5e53b9e85eeeab02154cab4b70894c96e97a9c747a26d19d63
     CMAKE_ARGS
         -DENABLE_SHARED=OFF
         -DENABLE_STATIC=ON
-        ${jpeg_flag}
 )

docs/HLSD/keyboard-shortcuts.md

@@ -53,6 +53,13 @@ Space counts as typing. The speed dial's default is the one bare Space, and
 `MainFrame` leaves it to a focused control that uses Space itself (text fields, buttons,
 combo boxes), so it opens the dial from the canvases and the tab strip only.
 
+`MainFrame::handle_global_shortcut` skips a chord that `KeyChord::edits_text()` reports
+while a text field has the focus (a wx text entry, spin control, web view or ImGui
+InputText), and skips every chord while an ImGui modal is open, as a wx modal dialog
+would. `ImGuiWrapper::owns_key()` reads the active InputText and the popup stack
+directly, since `WantCaptureKeyboard` lags a frame, and is called only when the focus is on
+a visible canvas from `OpenGLManager::create_wxglcanvas()`.
+
 ## Which event a chord matches
 
 Letters, digits and special keys match on `wxEVT_KEY_DOWN`. Its key codes do not depend

localization/i18n/OrcaSlicer.pot

@@ -10657,6 +10657,9 @@ msgstr ""
 msgid "Send Failed"
 msgstr ""
 
+msgid "No available printers"
+msgstr ""
+
 msgid "The name length exceeds the limit."
 msgstr ""
 

resources/images/toolbar_tooltip.svg

@@ -1 +1 @@
-<?xml version="1.0" encoding="UTF-8"?><svg id="a" xmlns="http://www.w3.org/2000/svg" viewBox="0 0 15 15"><rect x="7" y="12" width="1" height="1" style="fill:#fefefe;"/><path d="M4.5,5.5c0-1.71,1.43-3.09,3.16-3,1.62.08,2.84,1.54,2.84,3.17h0c0,.61-.25,1.2-.69,1.62l-2.31,2.24v.97" style="fill:none; stroke:#fefefe; stroke-linecap:round; stroke-linejoin:round;"/></svg>
+<?xml version="1.0" encoding="UTF-8"?><svg id="a" xmlns="http://www.w3.org/2000/svg" viewBox="0 0 15 15"><rect x="1.5" y="3.5" width="12" height="8" rx="1" ry="1" style="fill:none; stroke:#fefefe; stroke-linecap:round; stroke-linejoin:round;"/><path d="M3,5h1v1h-1Z M5,5h1v1h-1Z M7,5h1v1h-1Z M9,5h1v1h-1Z M11,5h1v1h-1Z M4,7h1v1h-1Z M6,7h1v1h-1Z M8,7h1v1h-1Z M10,7h1v1h-1Z M5,9h5v1h-5Z" style="fill:#fefefe;"/></svg>

resources/profiles/Snapmaker.json

@@ -1,6 +1,6 @@
 {
 	"name": "Snapmaker",
-	"version": "02.04.00.17",
+	"version": "02.04.00.18",
 	"force_update": "0",
 	"description": "Snapmaker configurations",
 	"machine_model_list": [

resources/profiles/Snapmaker/filament/Snapmaker ABS @U1 base.json

@@ -49,5 +49,8 @@
 	],
 	"pressure_advance": [
 		"0.02"
+	],
+	"temperature_vitrification": [
+		"100"
 	]
 }

resources/profiles/Snapmaker/filament/Snapmaker ASA @U1 base.json

@@ -46,5 +46,8 @@
 	],
 	"fan_min_speed": [
 		"0"
+	],
+	"temperature_vitrification": [
+		"100"
 	]
 }

resources/profiles/Snapmaker/filament/Snapmaker PETG @U1 base.json

@@ -45,7 +45,7 @@
 		"250"
 	],
 	"temperature_vitrification": [
-		"178"
+		"70"
 	],
 	"fan_max_speed": [
 		"20"

resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 base.json

@@ -4,5 +4,8 @@
 	"inherits": "fdm_filament_petg",
 	"from": "system",
 	"filament_id": "OFW8lqnb",
-	"instantiation": "false"
+	"instantiation": "false",
+	"temperature_vitrification": [
+		"70"
+	]
 }

resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1 base.json

@@ -60,7 +60,7 @@
 		"250"
 	],
 	"temperature_vitrification": [
-		"178"
+		"70"
 	],
 	"fan_max_speed": [
 		"20"

resources/profiles/Snapmaker/filament/Snapmaker PLA @U1 base.json

@@ -34,5 +34,8 @@
 	],
 	"nozzle_temperature": [
 		"220"
+	],
+	"temperature_vitrification": [
+		"45"
 	]
 }

resources/profiles/Snapmaker/filament/Snapmaker PLA Eco @U1 base.json

@@ -34,5 +34,8 @@
 	],
 	"filament_cooling_final_speed": [
 		"60"
+	],
+	"temperature_vitrification": [
+		"45"
 	]
 }

resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 base.json

@@ -34,5 +34,8 @@
 	],
 	"nozzle_temperature": [
 		"220"
+	],
+	"temperature_vitrification": [
+		"45"
 	]
 }

resources/profiles/Snapmaker/filament/Snapmaker PLA Metal @U1 base.json

@@ -40,5 +40,8 @@
 	],
 	"nozzle_temperature": [
 		"220"
+	],
+	"temperature_vitrification": [
+		"45"
 	]
 }

resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 base.json

@@ -31,5 +31,8 @@
 	],
 	"slow_down_layer_time": [
 		"8"
+	],
+	"temperature_vitrification": [
+		"45"
 	]
 }

resources/profiles/Snapmaker/filament/Snapmaker TPE @U1.json

@@ -50,5 +50,8 @@
 	"additional_cooling_fan_speed": [
 		"70",
 		"70"
+	],
+	"temperature_vitrification": [
+		"30"
 	]
 }

resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1 base.json

@@ -137,7 +137,7 @@
 		"240"
 	],
 	"temperature_vitrification": [
-		"60"
+		"30"
 	],
 	"nozzle_temperature_range_low": [
 		"200"

resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1.json

@@ -302,7 +302,7 @@
 		"-1"
 	],
 	"temperature_vitrification": [
-		"60"
+		"30"
 	],
 	"textured_cool_plate_temp": [
 		"40"

resources/profiles/Snapmaker/filament/Snapmaker TPU @U1.json

@@ -29,5 +29,8 @@
 	"additional_cooling_fan_speed": [
 		"70",
 		"70"
+	],
+	"temperature_vitrification": [
+		"30"
 	]
 }

resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1.json

@@ -49,5 +49,8 @@
 	"additional_cooling_fan_speed": [
 		"70",
 		"70"
+	],
+	"temperature_vitrification": [
+		"30"
 	]
 }

resources/profiles/Snapmaker/machine/Snapmaker U1 (0.2 nozzle).json

@@ -97,7 +97,7 @@
 		"20",
 		"12"
 	],
-	"machine_start_gcode": "SET_PRINT_AUTO_BED_LEVELING ENABLE=1\nSET_TIME_LAPSE_CAMERA ENABLE=1\n;===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\n{if curr_bed_type==\"High Temp Plate\"}                                                                                                                                                                                                               \nG28 Z Z_OFFSET -0.07                                                                                                                                                                                                                                    \n{else}                                                                                                                                                                                                               \nG28 Z                                                                                                                                                                                                                                                                                                                                                                                                                                                                          \n{endif} \n\n\n;===== 热床调平 =================\n{if curr_bed_type==\"High Temp Plate\"}                                                                                                                                                                                                               \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0 Z_OFFSET=-0.07\n{else}                                                                                                                                                                                                               \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0\n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0",
+	"machine_start_gcode": "SET_PRINT_AUTO_BED_LEVELING ENABLE=1\nSET_TIME_LAPSE_CAMERA ENABLE=1\n;===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\n;===== top cover purifier =====\n{if min_vitrification_temperature <= 50}\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=42 ALARM_TEMP=48 FAN_SPEED=0.6 DELAY_OFF=0 ; strong cooling\n{elsif min_vitrification_temperature <= 70}\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=45 ALARM_TEMP=51 FAN_SPEED=0.6 DELAY_OFF=0 ; weak cooling\n{else}\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=600 ; keep warm\n{endif}\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\n\n;==== 预挤出耗材 =====\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder]}\nT{initial_extruder}\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder]}\nSM_PRINT_PREEXTRUDE_FILAMENT INDEX={initial_extruder}\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nM107\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nM107\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nM106 S255\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\nM107\n{if curr_bed_type==\"High Temp Plate\"}                                                                                                                                                                                                               \nG28 Z Z_OFFSET -0.07                                                                                                                                                                                                                                    \n{else}                                                                                                                                                                                                               \nG28 Z                                                                                                                                                                                                                                                                                                                                                                                                                                                                          \n{endif} \n\n\n;===== 热床调平 =================\nM107\n{if curr_bed_type==\"High Temp Plate\"}                                                                                                                                                                                                               \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0 Z_OFFSET=-0.07\n{else}                                                                                                                                                                                                               \n; AlwLine truncated
 	"machine_tool_change_time": "5",
 	"max_layer_height": [
 		"0.14",

resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 nozzle).json

@@ -97,7 +97,7 @@
 		"20",
 		"12"
 	],
-	"machine_start_gcode": "SET_PRINT_AUTO_BED_LEVELING ENABLE=1\nSET_TIME_LAPSE_CAMERA ENABLE=1\n;===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\n{if curr_bed_type==\"High Temp Plate\"}                                                                                                                                                                                                               \nG28 Z Z_OFFSET -0.07                                                                                                                                                                                                                                    \n{else}                                                                                                                                                                                                               \nG28 Z                                                                                                                                                                                                                                                                                                                                                                                                                                                                          \n{endif} \n\n\n;===== 热床调平 =================\n{if curr_bed_type==\"High Temp Plate\"}                                                                                                                                                                                                               \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0 Z_OFFSET=-0.07\n{else}                                                                                                                                                                                                               \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0\n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0",
+	"machine_start_gcode": "SET_PRINT_AUTO_BED_LEVELING ENABLE=1\nSET_TIME_LAPSE_CAMERA ENABLE=1\n;===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\n;===== top cover purifier =====\n{if min_vitrification_temperature <= 50}\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=42 ALARM_TEMP=48 FAN_SPEED=0.6 DELAY_OFF=0 ; strong cooling\n{elsif min_vitrification_temperature <= 70}\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=45 ALARM_TEMP=51 FAN_SPEED=0.6 DELAY_OFF=0 ; weak cooling\n{else}\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=600 ; keep warm\n{endif}\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\n\n;==== 预挤出耗材 =====\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder]}\nT{initial_extruder}\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder]}\nSM_PRINT_PREEXTRUDE_FILAMENT INDEX={initial_extruder}\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nM107\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nM107\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nM106 S255\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\nM107\n{if curr_bed_type==\"High Temp Plate\"}                                                                                                                                                                                                               \nG28 Z Z_OFFSET -0.07                                                                                                                                                                                                                                    \n{else}                                                                                                                                                                                                               \nG28 Z                                                                                                                                                                                                                                                                                                                                                                                                                                                                          \n{endif} \n\n\n;===== 热床调平 =================\nM107\n{if curr_bed_type==\"High Temp Plate\"}                                                                                                                                                                                                               \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0 Z_OFFSET=-0.07\n{else}                                                                                                                                                                                                               \n; AlwLine truncated
 	"machine_tool_change_time": "5",
 	"max_layer_height": [
 		"0.32",

resources/profiles/Snapmaker/machine/Snapmaker U1 (0.6 nozzle).json

@@ -97,7 +97,7 @@
 		"20",
 		"12"
 	],
-	"machine_start_gcode": "SET_PRINT_AUTO_BED_LEVELING ENABLE=1\nSET_TIME_LAPSE_CAMERA ENABLE=1\n;===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\n{if curr_bed_type==\"High Temp Plate\"}                                                                                                                                                                                                               \nG28 Z Z_OFFSET -0.07                                                                                                                                                                                                                                    \n{else}                                                                                                                                                                                                               \nG28 Z                                                                                                                                                                                                                                                                                                                                                                                                                                                                          \n{endif} \n\n\n;===== 热床调平 =================\n{if curr_bed_type==\"High Temp Plate\"}                                                                                                                                                                                                               \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0 Z_OFFSET=-0.07\n{else}                                                                                                                                                                                                               \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0\n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0",
+	"machine_start_gcode": "SET_PRINT_AUTO_BED_LEVELING ENABLE=1\nSET_TIME_LAPSE_CAMERA ENABLE=1\n;===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\n;===== top cover purifier =====\n{if min_vitrification_temperature <= 50}\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=42 ALARM_TEMP=48 FAN_SPEED=0.6 DELAY_OFF=0 ; strong cooling\n{elsif min_vitrification_temperature <= 70}\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=45 ALARM_TEMP=51 FAN_SPEED=0.6 DELAY_OFF=0 ; weak cooling\n{else}\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=600 ; keep warm\n{endif}\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\n\n;==== 预挤出耗材 =====\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder]}\nT{initial_extruder}\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder]}\nSM_PRINT_PREEXTRUDE_FILAMENT INDEX={initial_extruder}\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nM107\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nM107\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nM106 S255\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\nM107\n{if curr_bed_type==\"High Temp Plate\"}                                                                                                                                                                                                               \nG28 Z Z_OFFSET -0.07                                                                                                                                                                                                                                    \n{else}                                                                                                                                                                                                               \nG28 Z                                                                                                                                                                                                                                                                                                                                                                                                                                                                          \n{endif} \n\n\n;===== 热床调平 =================\nM107\n{if curr_bed_type==\"High Temp Plate\"}                                                                                                                                                                                                               \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0 Z_OFFSET=-0.07\n{else}                                                                                                                                                                                                               \n; AlwLine truncated
 	"machine_tool_change_time": "5",
 	"max_layer_height": [
 		"0.42",

resources/profiles/Snapmaker/machine/Snapmaker U1 (0.8 nozzle).json

@@ -97,7 +97,7 @@
 		"20",
 		"12"
 	],
-	"machine_start_gcode": "SET_PRINT_AUTO_BED_LEVELING ENABLE=1\nSET_TIME_LAPSE_CAMERA ENABLE=1\n;===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\n{if curr_bed_type==\"High Temp Plate\"}                                                                                                                                                                                                               \nG28 Z Z_OFFSET -0.07                                                                                                                                                                                                                                    \n{else}                                                                                                                                                                                                               \nG28 Z                                                                                                                                                                                                                                                                                                                                                                                                                                                                          \n{endif} \n\n\n;===== 热床调平 =================\n{if curr_bed_type==\"High Temp Plate\"}                                                                                                                                                                                                               \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0 Z_OFFSET=-0.07\n{else}                                                                                                                                                                                                               \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0\n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0",
+	"machine_start_gcode": "SET_PRINT_AUTO_BED_LEVELING ENABLE=1\nSET_TIME_LAPSE_CAMERA ENABLE=1\n;===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\n;===== top cover purifier =====\n{if min_vitrification_temperature <= 50}\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=42 ALARM_TEMP=48 FAN_SPEED=0.6 DELAY_OFF=0 ; strong cooling\n{elsif min_vitrification_temperature <= 70}\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=45 ALARM_TEMP=51 FAN_SPEED=0.6 DELAY_OFF=0 ; weak cooling\n{else}\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=600 ; keep warm\n{endif}\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\n\n;==== 预挤出耗材 =====\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder]}\nT{initial_extruder}\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder]}\nSM_PRINT_PREEXTRUDE_FILAMENT INDEX={initial_extruder}\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nM107\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nM107\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nM106 S255\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\nM107\n{if curr_bed_type==\"High Temp Plate\"}                                                                                                                                                                                                               \nG28 Z Z_OFFSET -0.07                                                                                                                                                                                                                                    \n{else}                                                                                                                                                                                                               \nG28 Z                                                                                                                                                                                                                                                                                                                                                                                                                                                                          \n{endif} \n\n\n;===== 热床调平 =================\nM107\n{if curr_bed_type==\"High Temp Plate\"}                                                                                                                                                                                                               \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0 Z_OFFSET=-0.07\n{else}                                                                                                                                                                                                               \n; AlwLine truncated
 	"machine_tool_change_time": "5",
 	"max_layer_height": [
 		"0.56",

resources/web/dialog/PluginsDialog/index.html

@@ -18,7 +18,7 @@
   <script src="../js/plugin-config-ui.js"></script>
   <script src="./index.js"></script>
   <script src="./plugin-sort.js"></script>
-  <script src="../js/fuzzy-search.js"></script>
+  <script src="../../js/fuzzy-search.js"></script>
   <script src="./plugin-search.js"></script>
 </head>
 <body onLoad="OnInit()">

resources/web/homepage/js/home.js

@@ -156,12 +156,16 @@ function SetCloudMode( bOn )
 
 	m_CloudMode=bOn;
 	$("body").toggleClass("cloud-mode", bOn);
+
+	if( bOn )
+	{
+		$(".BtnItem").removeClass("BtnItemSelected");
+		$(".BtnShortcut").addClass("BtnItemSelected");
+	}
 }
 
 function GotoCloud()
 {
-	$(".BtnItem").removeClass("BtnItemSelected");
-	$(".BtnShortcut").addClass("BtnItemSelected");
 	SetCloudMode(true);
 	SendSimpleCommand("homepage_open_cloud");
 }

scripts/flatpak/com.orcaslicer.OrcaSlicer.yml

@@ -336,10 +336,10 @@ modules:
         sha256: 3d22d46c566b1761a0e15ea397589b3a5f36ac09b7c785382e6470156c04247f
         dest: external-packages/PNG
 
-      # libjpeg-turbo 3.0.1
+      # libjpeg-turbo 3.2.0
       - type: file
-        url: https://github.com/libjpeg-turbo/libjpeg-turbo/archive/refs/tags/3.0.1.zip
-        sha256: d6d99e693366bc03897677650e8b2dfa76b5d6c54e2c9e70c03f0af821b0a52f
+        url: https://github.com/libjpeg-turbo/libjpeg-turbo/archive/refs/tags/3.2.0.zip
+        sha256: 1b4c2cb6cba1ca5e53b9e85eeeab02154cab4b70894c96e97a9c747a26d19d63
         dest: external-packages/JPEG
 
       # Freetype 2.12.1

scripts/flatpak/entrypoint

@@ -1,7 +1,7 @@
 #!/usr/bin/env sh
 
-# Work-around https://gitlab.gnome.org/GNOME/gnome-build-meta/-/issues/754
-grep -q org.freedesktop.Platform.GL.nvidia /.flatpak-info && export WEBKIT_DISABLE_DMABUF_RENDERER=1
+# WebKit's NVIDIA DMABUF workaround (gnome-build-meta#754) is applied by the
+# binary itself, gated on the runtime WebKitGTK version (src/OrcaSlicer.cpp).
 
 # Work-around https://github.com/bambulab/BambuStudio/issues/3440
 # Use LC_NUMERIC instead of LC_ALL to prevent decimal separator issues

scripts/orca_profile_tool.py

@@ -12,6 +12,7 @@ commands:
   trim             delete profile files no <vendor>.json list references
   update-index     regenerate the *_list sections of <vendor>.json
   legacy-compat    write the printers user presets can be migrated back to
+  gcode-diff       print a readable markdown diff of changed custom G-code
 
 options shared by several commands:
   --vendor VENDOR      act on one vendor bundle only; repeatable, empty means all
@@ -94,11 +95,14 @@ parent in the OFL map. filament_vendor / filament_type resolve the same way.
 """
 
 import argparse
+import difflib
 import functools
+import html
 import json
 import os
 import posixpath
 import re
+import subprocess
 import sys
 import uuid
 from collections import Counter, defaultdict
@@ -192,6 +196,7 @@ VECTOR_KEYS = {
 
 PRINT_CONFIG_CPP = os.path.normpath(
     os.path.join(SCRIPTS_DIR, "..", "src", "libslic3r", "PrintConfig.cpp"))
+TAB_CPP = os.path.normpath(os.path.join(SCRIPTS_DIR, "..", "src", "slic3r", "GUI", "Tab.cpp"))
 
 
 @functools.lru_cache(maxsize=None)
@@ -313,11 +318,11 @@ REMEDY_HINTS = {
 }
 
 
-def print_error(msg):
-    print(f"\033[91m[ERROR]\033[0m {msg}")  # Red
+def print_error(msg, file=None):
+    print(f"\033[91m[ERROR]\033[0m {msg}", file=file)  # Red
 
-def print_warning(msg):
-    print(f"\033[93m[WARNING]\033[0m {msg}")  # Yellow
+def print_warning(msg, file=None):
+    print(f"\033[93m[WARNING]\033[0m {msg}", file=file)  # Yellow
 
 def print_info(msg):
     print(f"\033[94m[INFO]\033[0m {msg}")  # Blue
@@ -3209,6 +3214,223 @@ def run_legacy_compat(base_dir, profiles_dir, output, check):
     return 0
 
 
+# ---------------------------------------------------------------------------
+# gcode-diff
+# ---------------------------------------------------------------------------
+
+# UTF-8 bytes, kept well under GitHub's 65,536-character comment limit.
+GCODE_DIFF_BUDGET = 60000
+# The file names a section's summary shows before "and N more".
+GCODE_DIFF_SUMMARY_FILES = 3
+
+GCODE_DIFF_HEADER = (
+    "## Custom G-code changes\n"
+    "\n"
+    "GitHub shows custom G-code in a profile as one long line, so below is a line by line "
+    "diff of each changed G-code or other text setting.\n")
+
+
+@functools.lru_cache(maxsize=None)
+def _text_option_keys():
+    """The string options PrintConfig.cpp defines as G-code or other multi-line text
+    (every *_gcode option, and every one it marks multiline, such as notes), plus the
+    ones Tab.cpp edits as code, such as filename_format."""
+    with open(PRINT_CONFIG_CPP, encoding="utf-8") as f:
+        source = f.read()
+    keys = set()
+    for body in re.split(r"\bdef\s*=\s*this->add(?:_nullable)?\(", source)[1:]:
+        match = re.match(r'"(\w+)",\s*coStrings?\b', body)
+        if match and (match.group(1).endswith("_gcode")
+                      or re.search(r"def->multiline\s*=\s*true", body)):
+            keys.add(match.group(1))
+    if "machine_start_gcode" not in keys:
+        raise RuntimeError(f"{PRINT_CONFIG_CPP} no longer defines machine_start_gcode")
+    # Tab.cpp only adds keys, so a missing file is not an error.
+    try:
+        with open(TAB_CPP, encoding="utf-8") as f:
+            gui = f.read()
+    except OSError:
+        gui = ""
+    keys.update(re.findall(r'get_option\("(\w+)"\);(?:(?!get_option\().)*?\bis_code\s*=\s*true',
+                           gui, re.DOTALL))
+    return frozenset(keys)
+
+
+def _git(cwd, *args, stdin=None):
+    return subprocess.run(["git", "-C", cwd, *args], input=stdin, check=True,
+                          capture_output=True).stdout
+
+
+def _blobs_at(profiles_dir, specs):
+    """{(ref, path): bytes, or None if not a file there} for (ref, path relative to
+    profiles_dir) pairs, all read by one git cat-file process."""
+    prefix = _git(profiles_dir, "rev-parse", "--show-prefix").decode("utf-8").strip()
+    out = _git(profiles_dir, "cat-file", "--batch",
+               stdin="".join(f"{ref}:{prefix}{rel}\n" for ref, rel in specs).encode("utf-8"))
+    blobs, pos = {}, 0
+    for spec in specs:
+        end = out.index(b"\n", pos)
+        header = out[pos:end]
+        pos = end + 1
+        # "<name> missing" and "<name> ambiguous" have no content; "<oid> <type> <size>" does.
+        if header.endswith((b" missing", b" ambiguous")):
+            blobs[spec] = None
+            continue
+        _oid, kind, size = header.split()
+        blobs[spec] = out[pos:pos + int(size)] if kind == b"blob" else None
+        pos += int(size) + 1
+    return blobs
+
+
+def _parse_profile(raw, rel, where):
+    """The JSON in raw, or None with a warning when it is absent or not JSON."""
+    if raw is None:
+        print_warning(f"{rel}: skipped, not found at {where}", file=sys.stderr)
+        return None
+    try:
+        return json.loads(raw.decode("utf-8-sig"))
+    except ValueError as e:
+        print_warning(f"{rel}: skipped, cannot read it at {where}: {e}", file=sys.stderr)
+        return None
+
+
+def _changed_profiles(profiles_dir, base, head):
+    """(old path, new path) of each JSON file under profiles_dir that differs between
+    base and head (the working tree, untracked files included, when None); the absent
+    side of an added or deleted file is None, and so is a side that is not JSON. Renames
+    are paired."""
+    out = _git(profiles_dir, "diff", "--name-status", "-z", "-M", "--relative", base,
+               *([head] if head else []), "--", ".")
+    fields = out.decode("utf-8").split("\0")
+    pairs, i = [], 0
+    while i + 1 < len(fields):
+        status = fields[i]
+        old = new = fields[i + 1]
+        if status[0] in "RC":
+            new = fields[i + 2]
+            i += 3
+        else:
+            i += 2
+        old = None if status[0] == "A" or not old.endswith(".json") else old
+        new = None if status[0] == "D" or not new.endswith(".json") else new
+        if old or new:
+            pairs.append((old, new))
+    if head is None:
+        out = _git(profiles_dir, "ls-files", "-z", "--others", "--exclude-standard", "--", ".")
+        pairs += [(None, rel) for rel in out.decode("utf-8").split("\0")
+                  if rel.endswith(".json") and rel.split("/")[0] != USER_DIR]
+    return pairs
+
+
+def _text_lines(value):
+    return [line.rstrip() for line in value.split("\n")] if value else []
+
+
+def _text_changes(old, new):
+    """(setting, unified diff) for every G-code or other text value that differs
+    between two profiles; a vector option with several values gives one per value."""
+    changes = []
+    for key in list(new) + [k for k in old if k not in new]:
+        a, b = _as_list(old.get(key, [])), _as_list(new.get(key, []))
+        if a == b or not all(isinstance(v, str) for v in a + b):
+            continue
+        if key not in _text_option_keys() and not any("\n" in v for v in a + b):
+            continue
+        width = max(len(a), len(b))
+        for i in range(width):
+            diff = list(difflib.unified_diff(
+                _text_lines(a[i] if i < len(a) else ""), _text_lines(b[i] if i < len(b) else ""),
+                lineterm=""))[2:]  # drops the ---/+++ file header
+            if diff:
+                changes.append((key if width == 1 else f"{key}[{i}]", "\n".join(diff)))
+    return changes
+
+
+def _gcode_diff_section(files, setting, diff):
+    # A fence longer than any backtick run in the G-code cannot be closed by it.
+    fence = "`" * max([3] + [len(run) + 1 for run in re.findall(r"`+", diff)])
+    # In <code>, the "@BBL" of a filament file name does not mention a GitHub user.
+    def code(text):
+        return f"<code>{html.escape(text, quote=False)}</code>"
+    names, listing = ", ".join(map(code, files)), ""
+    if len(files) > GCODE_DIFF_SUMMARY_FILES + 1:  # never "and 1 more"
+        listing = f"<p>{names}</p>\n\n"  # an HTML block, so markdown in names stays literal
+        names = (", ".join(map(code, files[:GCODE_DIFF_SUMMARY_FILES]))
+                 + f" and {len(files) - GCODE_DIFF_SUMMARY_FILES} more")
+    return (f"\n<details>\n<summary><b>{names} - {code(setting)} (click to expand)</b>"
+            f"</summary>\n\n{listing}{fence}diff\n{diff}\n{fence}\n\n</details>\n")
+
+
+def gcode_diff(profiles_dir, base, head=None, vendors=None):
+    """Markdown with one collapsed diff per changed G-code setting between base and
+    head, or "" when none changed. Files whose diff of a setting is identical share
+    one section. Cut to whole sections under GCODE_DIFF_BUDGET."""
+    pairs = [(old, new) for old, new in _changed_profiles(profiles_dir, base, head)
+             if not vendors or any(p and p.split("/")[0] in vendors for p in (old, new))]
+    specs = ([(base, old) for old, _ in pairs if old]
+             + [(head, new) for _, new in pairs if new and head])
+    blobs = _blobs_at(profiles_dir, specs) if specs else {}
+
+    def load(ref, rel):
+        if rel is None:
+            return {}
+        if ref:
+            return _parse_profile(blobs[(ref, rel)], rel, ref)
+        try:
+            return _parse_profile(Path(profiles_dir, rel).read_bytes(), rel, "the working tree")
+        except OSError as e:
+            print_warning(f"{rel}: skipped, cannot read it: {e}", file=sys.stderr)
+            return None
+
+    groups = {}  # (setting, diff) -> files, in the order git lists them
+    for old_rel, new_rel in pairs:
+        old, new = load(base, old_rel), load(head, new_rel)
+        if not isinstance(old, dict) or not isinstance(new, dict):
+            continue
+        for setting, diff in _text_changes(old, new):
+            groups.setdefault((setting, diff), []).append(new_rel or old_rel)
+    if not groups:
+        return ""
+
+    sections = [_gcode_diff_section(files, setting, diff)
+                for (setting, diff), files in groups.items()]
+    budget = GCODE_DIFF_BUDGET - len(GCODE_DIFF_HEADER.encode("utf-8"))
+    shown = 0
+    for section in sections:
+        budget -= len(section.encode("utf-8"))
+        if budget < 0:
+            break
+        shown += 1
+    note, hidden = "", len(sections) - shown
+    if hidden:
+        note = (f"\n{hidden} of {len(sections)} sections {'is' if hidden == 1 else 'are'} not "
+                "shown because the comment would be too long for GitHub. See the Files "
+                "changed tab for the rest.\n")
+    return GCODE_DIFF_HEADER + "".join(sections[:shown]) + note
+
+
+def _default_gcode_diff_base(profiles_dir, head):
+    for main in ("upstream/main", "origin/main"):
+        try:
+            return _git(profiles_dir, "merge-base", head or "HEAD", main).decode().strip()
+        except subprocess.CalledProcessError:
+            continue
+    raise RuntimeError("no --base given, and neither upstream/main nor origin/main exists")
+
+
+def run_gcode_diff(profiles_dir, vendors, base, head):
+    try:
+        markdown = gcode_diff(profiles_dir, base or _default_gcode_diff_base(profiles_dir, head),
+                              head, vendors)
+    # UnicodeDecodeError means git listed a file name that is not UTF-8.
+    except (OSError, RuntimeError, UnicodeDecodeError, subprocess.CalledProcessError) as e:
+        stderr = getattr(e, "stderr", None)
+        print_error(stderr.decode(errors="replace").strip() if stderr else str(e), file=sys.stderr)
+        return 1
+    sys.stdout.write(markdown)
+    return 0
+
+
 # ---------------------------------------------------------------------------
 # CLI
 # ---------------------------------------------------------------------------
@@ -3233,6 +3455,9 @@ examples:
   orca_profile_tool.py legacy-compat --base /tmp/v2.4.2/resources/profiles
       rewrite resources/info/legacy_compatible_printers.json against 2.4.2's
       profiles (git archive v2.4.2 resources/profiles | tar -x -C /tmp/v2.4.2)
+  orca_profile_tool.py gcode-diff > gcode.md
+      the changed custom G-code of the working tree since it left upstream/main,
+      as markdown with one collapsed diff per setting
 
 after adding, renaming or deleting profile files, run in this order:
   normalize -> update-index -> generate-id -> check
@@ -3387,6 +3612,25 @@ def build_parser():
     legacy_cmd.add_argument("--check", action="store_true",
                             help="fail if the map differs from what --base implies; write nothing")
 
+    gcode_cmd = add(
+        "gcode-diff", [vendor_opt, profiles_opt],
+        "print a readable markdown diff of changed custom G-code",
+        "Print, as markdown, a unified diff of every G-code or other multi-line\n"
+        "setting that differs between --base and --head in each changed profile\n"
+        "file, one collapsed section per setting. Files whose diff of a setting is\n"
+        "identical share a section. Trailing spaces are removed from every line, and\n"
+        "the output is cut to whole sections to fit a GitHub comment. Prints nothing\n"
+        "when no such setting changed. CI posts it on profile PRs.\n"
+        "\n"
+        "The settings are the *_gcode and multiline string options PrintConfig.cpp\n"
+        "defines, the options Tab.cpp edits as code (such as filename_format), and any\n"
+        "string value that spans several lines.")
+    gcode_cmd.add_argument("--base", metavar="REF",
+                           help="compare against this git ref (default: the merge base "
+                                "with upstream/main, else origin/main)")
+    gcode_cmd.add_argument("--head", metavar="REF",
+                           help="compare this git ref (default: the working tree)")
+
     return parser
 
 
@@ -3423,6 +3667,9 @@ def main(argv=None):
     if args.command == "legacy-compat":
         return run_legacy_compat(args.base, profiles_dir, args.output, args.check)
 
+    if args.command == "gcode-diff":
+        return run_gcode_diff(profiles_dir, vendors, args.base, args.head)
+
     if args.command == "fix-variant":
         _changed, errors = fix_variant_arrays(profiles_dir, vendors, dry_run=args.dry_run,
                                                strict=args.strict)

scripts/tests/test_profile_tool.py

@@ -1,7 +1,7 @@
 #!/usr/bin/env python3
 """Tests for the tree-maintenance half of scripts/orca_profile_tool.py: the
-normalize, trim, update-index, fix-variant and check commands, and the subcommand
-dispatch that reaches them (stdlib unittest, no external deps).
+normalize, trim, update-index, fix-variant, check and gcode-diff commands, and the
+subcommand dispatch that reaches them (stdlib unittest, no external deps).
 
 The id halves are covered by test_filament_id.py and test_setting_id.py.
 
@@ -14,9 +14,12 @@ import json
 import os
 import re
 import shutil
+import stat
+import subprocess
 import sys
 import tempfile
 import unittest
+from unittest import mock
 
 sys.path.insert(0, os.path.abspath(os.path.join(os.path.dirname(__file__), "..")))
 
@@ -41,7 +44,24 @@ class Tree:
         os.makedirs(self.profiles)
 
     def cleanup(self):
-        shutil.rmtree(self.dir, ignore_errors=True)
+        root = os.path.abspath(self.dir)
+
+        def writable_retry(func, path, _exc):
+            # Windows refuses to delete read-only files such as git's objects, and POSIX
+            # refuses to delete the entries of a read-only directory.
+            if not os.path.lexists(path):  # already removed, as on a second cleanup
+                return
+            parent = os.path.dirname(os.path.abspath(path))
+            try:
+                if os.path.commonpath([parent, root]) == root:  # never the temp dir itself
+                    os.chmod(parent, stat.S_IRWXU)
+                if not os.path.islink(path):  # chmod would follow it out of the tree
+                    os.chmod(path, stat.S_IRWXU)
+                func(path)
+            except (OSError, ValueError):  # commonpath raises ValueError across drives
+                pass
+        hook = "onexc" if sys.version_info >= (3, 12) else "onerror"
+        shutil.rmtree(self.dir, **{hook: writable_retry})
 
     def index_path(self, vendor):
         return os.path.join(self.profiles, vendor + ".json")
@@ -1409,6 +1429,292 @@ class TestDispatch(TreeCase):
         self.assertEqual(self.t.read("V", "filament/A.json")["type"], "filament")
 
 
+# ---------------------------------------------------------------------------
+# gcode-diff
+# ---------------------------------------------------------------------------
+
+@unittest.skipUnless(shutil.which("git"), "git not installed")
+class TestGcodeDiff(TreeCase):
+    START = "G28\nM104 S200\nG1 Z5"
+
+    def git(self, *args):
+        subprocess.run(["git", "-C", self.t.dir, "-c", "user.name=t", "-c", "user.email=t@t",
+                        "-c", "commit.gpgsign=false", *args], check=True, capture_output=True)
+
+    def printer(self, name, **extra):
+        self.t.write("V", f"machine/{name}.json", {"type": "machine", "name": name, **extra})
+
+    def commit(self):
+        self.git("add", "-A")
+        self.git("commit", "-q", "--allow-empty", "-m", "x")
+
+    @classmethod
+    def setUpClass(cls):
+        # git's list of the variables that tie a process to a repository, asked with no
+        # GIT_* set since a stray GIT_DIR fails the query.
+        clean = {k: v for k, v in os.environ.items() if not k.startswith("GIT_")}
+        cls.repo_env_vars = set(subprocess.run(
+            ["git", "rev-parse", "--local-env-vars"], env=clean, check=True,
+            capture_output=True, text=True).stdout.split())
+
+    def setUp(self):
+        super().setUp()
+        # A git hook's GIT_DIR or GIT_INDEX_FILE would point every git call here, the
+        # tool's included, at the real repository instead of the temp tree.
+        env = {k: v for k, v in os.environ.items() if k not in self.repo_env_vars}
+        patcher = mock.patch.dict(os.environ, env, clear=True)
+        patcher.start()
+        self.addCleanup(patcher.stop)
+        self.git("init", "-q")
+        for name in ("A", "B", "C"):
+            self.printer(name, machine_start_gcode=self.START, nozzle_diameter=["0.4"])
+        self.printer("Gone", machine_end_gcode="M84")
+        self.commit()
+
+    def diff(self):
+        rc, out = self.run_command("gcode-diff", "--base", "HEAD")
+        self.assertEqual(rc, 0, out)
+        return out
+
+    def test_identical_edits_share_one_section(self):
+        for name in ("A", "B"):
+            self.printer(name, machine_start_gcode="G28\nM104 S210  \nG1 Z5")
+        self.printer("C", machine_start_gcode="G28\nM104 S220\nG1 Z5")
+        out = self.diff()
+        self.assertEqual(out.count("<details>"), 2)
+        self.assertIn("<code>V/machine/A.json</code>, <code>V/machine/B.json</code> - "
+                      "<code>machine_start_gcode</code>", out)
+        self.assertIn("<code>V/machine/C.json</code> - <code>machine_start_gcode</code>", out)
+        # Trailing spaces are removed.
+        self.assertIn("\n-M104 S200\n+M104 S210\n", out)
+        self.assertIn("\n\n```diff\n@@ ", out)
+        self.assertIn("\n```\n\n</details>", out)
+
+    def test_nothing_is_printed_without_a_text_change(self):
+        self.printer("A", machine_start_gcode=self.START, nozzle_diameter=["0.6"])
+        self.assertEqual(self.diff(), "")
+
+    def test_added_and_deleted_files_show_the_whole_value(self):
+        # An untracked file counts as added; the validator's user dir is not a profile.
+        self.printer("New", machine_start_gcode="G28\nG29")
+        self.t.write("user", "default/machine/U.json", {"machine_start_gcode": "G28"})
+        os.remove(self.t.path("V", "machine/Gone.json"))
+        out = self.diff()
+        self.assertIn("@@ -0,0 +1,2 @@\n+G28\n+G29\n", out)
+        self.assertIn("<code>V/machine/Gone.json</code> - <code>machine_end_gcode</code>", out)
+        self.assertIn("@@ -1 +0,0 @@\n-M84\n", out)
+        self.assertNotIn("U.json", out)
+
+    def test_a_multi_line_value_counts_whatever_its_key(self):
+        self.printer("A", machine_start_gcode=self.START, custom_note="one\ntwo")
+        self.assertIn("<code>V/machine/A.json</code> - <code>custom_note</code>", self.diff())
+
+    def test_a_file_name_cannot_mention_a_user(self):
+        self.t.write("V", "filament/PLA @BBL A1.json", {"filament_start_gcode": ["M106"]})
+        self.assertIn("<code>V/filament/PLA @BBL A1.json</code>", self.diff())
+
+    def test_head_compares_two_commits(self):
+        self.printer("A", machine_start_gcode="G28")
+        self.commit()
+        rc, out = self.run_command("gcode-diff", "--base", "HEAD~1", "--head", "HEAD")
+        self.assertEqual(rc, 0, out)
+        self.assertIn("<code>V/machine/A.json</code> - <code>machine_start_gcode</code>", out)
+
+    def test_a_renamed_file_diffs_against_its_old_self(self):
+        os.rename(self.t.path("V", "machine/A.json"), self.t.path("V", "machine/A2.json"))
+        self.printer("A2", machine_start_gcode="G28\nM104 S210\nG1 Z5", nozzle_diameter=["0.4"])
+        self.commit()
+        rc, out = self.run_command("gcode-diff", "--base", "HEAD~1", "--head", "HEAD")
+        self.assertEqual(rc, 0, out)
+        self.assertIn("<code>V/machine/A2.json</code> - <code>machine_start_gcode</code>", out)
+        self.assertIn("\n G28\n-M104 S200\n+M104 S210\n G1 Z5\n", out)
+
+    def test_a_file_renamed_off_json_loses_its_values(self):
+        os.rename(self.t.path("V", "machine/Gone.json"), self.t.path("V", "machine/Gone.json.bak"))
+        self.commit()
+        rc, out = self.run_command("gcode-diff", "--base", "HEAD~1", "--head", "HEAD")
+        self.assertEqual(rc, 0, out)
+        self.assertIn("<code>V/machine/Gone.json</code> - <code>machine_end_gcode</code>", out)
+        self.assertIn("@@ -1 +0,0 @@\n-M84\n", out)
+
+    def test_a_file_renamed_onto_json_is_new(self):
+        with open(self.t.path("V", "machine/Draft.txt"), "w", encoding="utf-8") as f:
+            json.dump({"type": "machine", "machine_start_gcode": self.START}, f)
+        self.commit()
+        os.rename(self.t.path("V", "machine/Draft.txt"), self.t.path("V", "machine/Draft.json"))
+        self.commit()
+        rc, out = self.run_command("gcode-diff", "--base", "HEAD~1", "--head", "HEAD")
+        self.assertEqual(rc, 0, out)
+        self.assertIn("@@ -0,0 +1,3 @@\n+G28\n+M104 S200\n+G1 Z5\n", out)
+
+    def test_a_batch_read_survives_paths_that_are_not_files(self):
+        blobs = apt._blobs_at(self.t.profiles, [("HEAD", "V/machine"), ("HEAD", "V/no such.json"),
+                                                ("HEAD", "V/machine/Gone.json")])
+        self.assertIsNone(blobs[("HEAD", "V/machine")])
+        self.assertIsNone(blobs[("HEAD", "V/no such.json")])
+        self.assertEqual(json.loads(blobs[("HEAD", "V/machine/Gone.json")])["machine_end_gcode"],
+                         "M84")
+
+    def test_each_value_of_a_vector_option_is_its_own_setting(self):
+        self.t.write("V", "filament/F.json", {"filament_start_gcode": ["M106", "M107"]})
+        self.commit()
+        self.t.write("V", "filament/F.json", {"filament_start_gcode": ["M106", "M106 S0"]})
+        out = self.diff()
+        self.assertEqual(out.count("<details>"), 1)
+        self.assertIn("<code>filament_start_gcode[1]</code>", out)
+
+    def test_vendor_limits_the_files(self):
+        self.printer("A", machine_start_gcode="G28")
+        self.t.write("W", "machine/X.json", {"machine_start_gcode": "G28"})
+        rc, out = self.run_command("gcode-diff", "--base", "HEAD", "--vendor", "V")
+        self.assertEqual(rc, 0, out)
+        self.assertIn("V/machine/A.json", out)
+        self.assertNotIn("W/machine/X.json", out)
+
+    def test_vendor_includes_files_moved_out_of_it(self):
+        self.t.add_vendor("W")
+        os.rename(self.t.path("V", "machine/A.json"), self.t.path("W", "machine/A.json"))
+        data = self.t.read("W", "machine/A.json")
+        self.t.write("W", "machine/A.json", {**data, "machine_start_gcode": "G28\nM104 S210\nG1 Z5"})
+        self.commit()
+        rc, out = self.run_command("gcode-diff", "--base", "HEAD~1", "--head", "HEAD",
+                                   "--vendor", "V")
+        self.assertEqual(rc, 0, out)
+        self.assertIn("<code>W/machine/A.json</code> - <code>machine_start_gcode</code>", out)
+
+    def same_edit(self, names):
+        """The diff after one start G-code edit to each of names; returns (summary, output)."""
+        for name in names:
+            self.printer(name, machine_start_gcode=self.START, nozzle_diameter=["0.4"])
+        self.commit()
+        for name in names:
+            self.printer(name, machine_start_gcode="G28")
+        out = self.diff()
+        return re.search(r"<summary>(.*)</summary>", out).group(1), out
+
+    def test_a_long_file_list_moves_into_the_section(self):
+        summary, out = self.same_edit("ABCDE")
+        self.assertIn("<code>V/machine/C.json</code> and 2 more - ", summary)
+        self.assertNotIn("D.json", summary)
+        self.assertIn("<code>V/machine/D.json</code>, <code>V/machine/E.json</code></p>\n\n```diff",
+                      out)
+
+    def test_four_files_are_all_named_in_the_summary(self):
+        summary, _out = self.same_edit("ABCD")
+        self.assertIn("<code>V/machine/D.json</code> - ", summary)
+        self.assertNotIn("more", summary)
+
+    def test_an_error_goes_to_stderr_only(self):
+        err = io.StringIO()
+        with contextlib.redirect_stderr(err):
+            rc, out = self.run_command("gcode-diff", "--base", "no-such-ref")
+        self.assertEqual(rc, 1)
+        self.assertEqual(out, "")
+        self.assertIn("no-such-ref", err.getvalue())
+
+    def test_a_file_name_that_is_not_utf8_is_an_error(self):
+        bad = UnicodeDecodeError("utf-8", b"\xe9.json", 0, 1, "invalid continuation byte")
+        err = io.StringIO()
+        with mock.patch.object(apt, "_changed_profiles", side_effect=bad), \
+                contextlib.redirect_stderr(err):
+            rc, out = self.run_command("gcode-diff", "--base", "HEAD")
+        self.assertEqual((rc, out), (1, ""))
+        self.assertIn("invalid continuation byte", err.getvalue())
+
+    def test_output_is_cut_to_whole_sections(self):
+        for name in ("A", "B", "C"):
+            self.printer(name, machine_start_gcode=name * 300)
+        size = len(apt.gcode_diff(self.t.profiles, "HEAD").encode("utf-8"))
+        with mock.patch.object(apt, "GCODE_DIFF_BUDGET", size - 1):
+            out = self.diff()
+        self.assertEqual(out.count("<details>"), 2)
+        self.assertEqual(out.count("</details>"), 2)
+        self.assertIn("\n1 of 3 sections is not shown", out)
+        with mock.patch.object(apt, "GCODE_DIFF_BUDGET", 1):
+            self.assertIn("\n3 of 3 sections are not shown", self.diff())
+
+    def test_cleanup_removes_the_repo(self):
+        # setUp's commit leaves read-only git objects, and a read-only directory blocks
+        # deletion on POSIX.
+        os.chmod(self.t.path("V", "machine"), stat.S_IRUSR | stat.S_IXUSR)
+        self.t.cleanup()
+        self.assertFalse(os.path.exists(self.t.dir))
+        with mock.patch.object(os, "chmod") as chmod:
+            self.t.cleanup()  # a second cleanup, as addCleanup runs, must not touch the temp dir
+        chmod.assert_not_called()
+
+    def test_only_repository_variables_are_stripped(self):
+        self.assertTrue({"GIT_DIR", "GIT_WORK_TREE", "GIT_INDEX_FILE"} <= self.repo_env_vars)
+        self.assertFalse({"GIT_SSH", "GIT_EXEC_PATH", "GIT_EDITOR"} & self.repo_env_vars)
+
+    def test_cleanup_leaves_symlink_targets_alone(self):
+        outside = tempfile.mkdtemp(prefix="profile_tool_outside_")
+        self.addCleanup(shutil.rmtree, outside, True)
+        target = os.path.join(outside, "f")
+        open(target, "w").close()
+        os.chmod(target, stat.S_IRUSR)
+        self.addCleanup(os.chmod, target, stat.S_IRWXU)  # runs before the rmtree above
+        machine = self.t.path("V", "machine")
+        try:
+            os.symlink(target, os.path.join(machine, "link"))
+        except (OSError, NotImplementedError):
+            self.skipTest("cannot create symlinks here")
+        os.chmod(machine, stat.S_IRUSR | stat.S_IXUSR)  # so removing the link fails at first
+        self.t.cleanup()
+        self.assertFalse(os.path.exists(self.t.dir))
+        self.assertEqual(stat.S_IMODE(os.stat(target).st_mode) & stat.S_IWUSR, 0)
+
+    def test_a_git_hook_environment_is_ignored(self):
+        scripts = os.path.join(REPO_ROOT, "scripts")
+        result = subprocess.run(
+            [sys.executable, "-m", "unittest",
+             "tests.test_profile_tool.TestGcodeDiff.test_head_compares_two_commits"],
+            cwd=scripts, capture_output=True, text=True,
+            env={**os.environ, "GIT_DIR": os.path.join(self.t.dir, "nowhere")})
+        self.assertEqual(result.returncode, 0, result.stderr)
+
+    def test_the_options_are_read_from_the_engine(self):
+        keys = apt._text_option_keys()
+        self.assertTrue({"machine_start_gcode", "filament_start_gcode", "printing_by_object_gcode",
+                         "notes", "post_process"} <= keys)
+        self.assertNotIn("emit_machine_limits_to_gcode", keys)  # a coBool
+
+    START_DEF = 'def = this->add("machine_start_gcode", coString);\n'
+
+    def keys_from(self, print_config, tab=None):
+        """_text_option_keys read from these sources; no tab means no Tab.cpp."""
+        paths = [os.path.join(self.t.dir, "PrintConfig.cpp"), os.path.join(self.t.dir, "Tab.cpp")]
+        for path, text in zip(paths, (print_config, tab)):
+            if text is not None:
+                with open(path, "w", encoding="utf-8") as f:
+                    f.write(text)
+        apt._text_option_keys.cache_clear()
+        self.addCleanup(apt._text_option_keys.cache_clear)
+        with mock.patch.object(apt, "PRINT_CONFIG_CPP", paths[0]), \
+                mock.patch.object(apt, "TAB_CPP", paths[1]):
+            return apt._text_option_keys()
+
+    def test_multiline_is_read_whatever_its_spacing(self):
+        keys = self.keys_from(self.START_DEF + 'def = this->add("printer_notes", coString);\n'
+                                               '    def->multiline  = true;\n')
+        self.assertIn("printer_notes", keys)
+
+    def test_the_code_options_of_tab_cpp_are_read(self):
+        keys = self.keys_from(self.START_DEF, 'option = optgroup->get_option("filename_format");\n'
+                                              'option.opt.is_code = true;\n'
+                                              'option = optgroup->get_option("layer_height");\n')
+        self.assertIn("filename_format", keys)
+        self.assertNotIn("layer_height", keys)
+
+    def test_a_missing_tab_cpp_is_not_an_error(self):
+        self.assertIn("machine_start_gcode", self.keys_from(self.START_DEF))
+
+    def test_markdown_in_a_file_name_stays_literal(self):
+        section = apt._gcode_diff_section(["V/a *b*.json", "V/c.json", "V/d.json", "V/e.json",
+                                           "V/f.json"], "machine_start_gcode", "@@ -1 +1 @@")
+        self.assertIn("\n<p><code>V/a *b*.json</code>, ", section)
+
+
 # ---------------------------------------------------------------------------
 # the real tree
 # ---------------------------------------------------------------------------

src/OrcaSlicer.cpp

@@ -163,6 +163,7 @@ using json = nlohmann::json;
 #include <X11/Xlib.h>
 #endif
 #include <unistd.h>
+#include "slic3r/GUI/Widgets/WebView.hpp"
 #endif
 
 #ifdef SLIC3R_GUI
@@ -1125,6 +1126,19 @@ static void load_downward_settings_list_from_config(std::string config_file, std
     }
 }
 
+#ifdef __WXGTK__
+// Virtual GPUs (VirtualBox, VMware, QEMU) cannot back WebKit's hardware DMABUF renderer.
+static bool is_hypervisor_guest()
+{
+    std::ifstream cpuinfo("/proc/cpuinfo");
+    std::string line;
+    while (std::getline(cpuinfo, line))
+        if (boost::starts_with(line, "flags"))
+            return line.find(" hypervisor") != std::string::npos;
+    return false;
+}
+#endif
+
 int CLI::run(int argc, char **argv)
 {
     // Mark the main thread for the debugger and for runtime checks.
@@ -1156,8 +1170,10 @@ int CLI::run(int argc, char **argv)
     // opt-in path. The ~2020-era WebKit2GTK XWayland compositor bug it
     // worked around appears fixed in WebKit2GTK >= 2.42; leaving it
     // unset preserves WebKit hardware acceleration on Device / Setup
-    // Wizard / login / store. The default path still applies it on
-    // XWayland sessions as a conservative fallback for older WebKit.
+    // Wizard / login / store. The default path applies it only where it
+    // forces GDK_BACKEND=x11 below (a build without EGL, so the app really
+    // runs through XWayland), and only when the linked WebKitGTK predates
+    // the fix (< 2.42), as a conservative fallback for older WebKit.
     // ------------------------------------------------------------------
     {
         const char* gdk_backend = ::getenv("GDK_BACKEND");
@@ -1165,6 +1181,17 @@ int CLI::run(int argc, char **argv)
         // honours the first backend in the comma-separated list).
         const bool x11_opt_in = gdk_backend && boost::starts_with(gdk_backend, "x11");
 
+        // NVIDIA's proprietary driver cannot back WebKitGTK's DMABUF renderer.
+        // Force the shared-memory transport, which keeps compositing and threaded
+        // scrolling; the second variable clears Debian/Ubuntu/openSUSE's isNVIDIA().
+        if (::access("/proc/driver/nvidia/version", F_OK) == 0 && WebView::SupportsForceSharedMemory()) {
+            ::setenv("WEBKIT_DMABUF_RENDERER_FORCE_SHM", "1", /* replace */ false);
+            ::setenv("WEBKIT_FORCE_DMABUF_RENDERER", "1", /* replace */ false);
+        }
+
+        if (is_hypervisor_guest() && WebView::SupportsForceSharedMemory())
+            ::setenv("WEBKIT_DMABUF_RENDERER_FORCE_SHM", "1", /* replace */ false);
+
         if (x11_opt_in) {
             // ===== X11 / XWayland (opted in via GDK_BACKEND=x11) =====
             BOOST_LOG_TRIVIAL(info) << "GDK_BACKEND=x11 detected; applying v2.3.2 X11/XWayland workarounds.";
@@ -1204,23 +1231,18 @@ int CLI::run(int argc, char **argv)
                 if (wayland_env && *wayland_env) {
                     BOOST_LOG_TRIVIAL(warning) << "Wayland detected but wxWidgets has no EGL support (wxHAS_EGL is OFF). Forcing X11 backend.";
                     ::setenv("GDK_BACKEND", "x11", true);
+
+                    // GTK will use X11 in a Wayland session here, which is the
+                    // one default-path case that really runs through XWayland.
+                    // WebKit2GTK accelerated compositing could fail silently
+                    // there on releases before 2.42, so force it off. Disabling
+                    // it also turns off threaded scrolling, hence the gate.
+                    if (WebView::NeedsCompositingWorkaround())
+                        ::setenv("WEBKIT_DISABLE_COMPOSITING_MODE", "1", /* replace */ false);
                 }
             }
             #endif
 
-            // WebKit2GTK compositing can fail under XWayland on older
-            // WebKit releases. Disable it only when both DISPLAY and
-            // WAYLAND_DISPLAY are set (i.e. an XWayland session is in
-            // use). On pure X11 or native Wayland, compositing is left
-            // enabled so WebKit retains HW acceleration.
-            {
-                const char* display_env_wk = ::getenv("DISPLAY");
-                const char* wayland_env_wk = ::getenv("WAYLAND_DISPLAY");
-                if (display_env_wk && *display_env_wk && wayland_env_wk && *wayland_env_wk) {
-                    ::setenv("WEBKIT_DISABLE_COMPOSITING_MODE", "1", /* replace */ false);
-                }
-            }
-
             // XInitThreads is needed before GStreamer may use Xlib. On
             // native Wayland without DISPLAY, GStreamer uses waylandsink
             // (no Xlib involved), so the call is skipped.

src/dev-utils/platform/unix/build_linux_image.sh.in

@@ -429,7 +429,8 @@ if [ "\$XDG_SESSION_TYPE" = "wayland" ] && [ "\$ZINK_DISABLE_OVERRIDE" != "1" ];
                 export __EGL_VENDOR_LIBRARY_FILENAMES=/usr/share/glvnd/egl_vendor.d/50_mesa.json
                 export MESA_LOADER_DRIVER_OVERRIDE=zink
                 export GALLIUM_DRIVER=zink
-                export WEBKIT_DISABLE_DMABUF_RENDERER=1
+                # WebKit's NVIDIA DMABUF workaround is applied by the binary itself,
+                # gated on the runtime WebKitGTK version (src/OrcaSlicer.cpp).
             fi
         fi
     fi

src/libslic3r/Arachne/WallToolPaths.cpp

@@ -812,7 +812,8 @@ bool WallToolPaths::removeEmptyToolPaths(std::vector<VariableWidthLines> &toolpa
      * Get the order constraints of the insets when printing walls per region / hole.
      * Each returned pair consists of adjacent wall lines where the left has an inset_idx one lower than the right.
      *
-     * Odd walls should always go after their enclosing wall polygons.
+     * Odd walls follow the same order as even ones, so that the centre line of a narrow wall is an inner wall
+     * like any other when printing inner to outer.
      *
      * \param outer_to_inner Whether the wall polygons with a lower inset_idx should go before those with a higher one.
  */
@@ -886,12 +887,7 @@ WallToolPaths::ExtrusionLineSet WallToolPaths::getRegionOrder(const std::vector<
                 continue; // not directly adjacent
             if (!shorter_then(loc_here - lineloc_nearby.j.p, (lineloc_here.j.w + lineloc_nearby.j.w) / 2 * diagonal_extension))
                 continue; // points are too far away from each other
-            if (here->is_odd || nearby->is_odd) {
-                if (here->is_odd && !nearby->is_odd && nearby->inset_idx < here->inset_idx)
-                    order_requirements.emplace(std::make_pair(nearby, here));
-                if (nearby->is_odd && !here->is_odd && here->inset_idx < nearby->inset_idx)
-                    order_requirements.emplace(std::make_pair(here, nearby));
-            } else if ((nearby->inset_idx < here->inset_idx) == outer_to_inner) {
+            if ((nearby->inset_idx < here->inset_idx) == outer_to_inner) {
                 order_requirements.emplace(std::make_pair(nearby, here));
             } else {
                 assert((nearby->inset_idx > here->inset_idx) == outer_to_inner);

src/libslic3r/GCode.cpp

@@ -432,27 +432,36 @@ static std::vector<Vec2d> get_path_of_change_filament(const Print& print)
 
     std::string OozePrevention::pre_toolchange(GCode& gcodegen)
     {
-        std::string gcode;
-
         unsigned int extruder_id = gcodegen.writer().filament()->id();
-        const auto& filament_idle_temp = gcodegen.config().idle_temperature;
-        if (filament_idle_temp.get_at(extruder_id) == 0) {
-            // There is no idle temperature defined in filament settings.
-            // Use the delta value from print config.
-            if (gcodegen.config().standby_temperature_delta.value != 0) {
-                // we assume that heating is always slower than cooling, so no need to block
-                gcode += gcodegen.writer().set_temperature
-                (this->_get_temp(gcodegen) + gcodegen.config().standby_temperature_delta.value, false, extruder_id);
-                gcode.pop_back();
-                gcode += " ;cooldown\n"; // this is a marker for GCodeProcessor, so it can supress the commands when needed
-            }
-        } else {
-            // Use the value from filament settings. That one is absolute, not delta.
-            gcode += gcodegen.writer().set_temperature(filament_idle_temp.get_at(extruder_id), false, extruder_id);
-            gcode.pop_back();
-            gcode += " ;cooldown\n"; // this is a marker for GCodeProcessor, so it can supress the commands when needed
+
+        // Check if this tool will ever be used again in this print.
+        bool is_last_use = false;
+        if (gcodegen.m_print != nullptr && !gcodegen.m_print->tool_ordering().empty()) {
+            coordf_t current_z        = gcodegen.layer() ? gcodegen.layer()->print_z : gcodegen.writer().get_position().z();
+            const auto& tool_ordering = gcodegen.m_print->tool_ordering();
+            const auto& cfg           = gcodegen.config();
+            const int heater          = imex_physical_heater_for(cfg.is_imex.value, cfg.physical_extruder_map, int(extruder_id));
+            is_last_use               = tool_ordering.is_last_extrusion_layer(current_z, extruder_id);
+            for (unsigned int f : tool_ordering.all_extruders())
+                if (is_last_use && imex_physical_heater_for(cfg.is_imex.value, cfg.physical_extruder_map, int(f)) == heater)
+                    is_last_use = tool_ordering.is_last_extrusion_layer(current_z, f);
         }
 
+        int temp = 0;
+        if (!is_last_use) {
+            const auto& filament_idle_temp = gcodegen.config().idle_temperature;
+            if (filament_idle_temp.get_at(extruder_id) == 0) {
+                if (gcodegen.config().standby_temperature_delta.value == 0)
+                    return std::string();
+                temp = this->_get_temp(gcodegen) + gcodegen.config().standby_temperature_delta.value;
+            } else {
+                temp = filament_idle_temp.get_at(extruder_id);
+            }
+        }
+
+        std::string gcode = gcodegen.writer().set_temperature(temp, false, extruder_id);
+        gcode.pop_back();
+        gcode += " ;cooldown\n"; // this is a marker for GCodeProcessor, so it can supress the commands when needed
         return gcode;
     }
 
@@ -3976,6 +3985,16 @@ void GCode::_do_export(Print& print, GCodeOutputStream &file, ThumbnailsGenerato
     this->placeholder_parser().set("print_time_minute", new ConfigOptionString(GCodeProcessor::reserved_tag(GCodeProcessor::ETags::Print_Time_Minute_Placeholder)));
     this->placeholder_parser().set("print_time_sec", new ConfigOptionString(GCodeProcessor::reserved_tag(GCodeProcessor::ETags::Print_Time_Sec_Placeholder)));
     this->placeholder_parser().set("used_filament_length", new ConfigOptionString(GCodeProcessor::reserved_tag(GCodeProcessor::ETags::Used_Filament_Length_Placeholder)));
+    // The final print statistics are known only after the whole G-code is generated, so they are filled in during post-processing too.
+    // The running extruded_* totals are left alone; profiles use them as numbers.
+    this->placeholder_parser().set("used_filament", new ConfigOptionString(GCodeProcessor::reserved_tag(GCodeProcessor::ETags::Used_Filament_Length_Placeholder)));
+    this->placeholder_parser().set("print_time", new ConfigOptionString(GCodeProcessor::reserved_tag(GCodeProcessor::ETags::Normal_Print_Time_Placeholder)));
+    this->placeholder_parser().set("normal_print_time", new ConfigOptionString(GCodeProcessor::reserved_tag(GCodeProcessor::ETags::Normal_Print_Time_Placeholder)));
+    this->placeholder_parser().set("silent_print_time", new ConfigOptionString(GCodeProcessor::reserved_tag(GCodeProcessor::ETags::Silent_Print_Time_Placeholder)));
+    this->placeholder_parser().set("total_weight", new ConfigOptionString(GCodeProcessor::reserved_tag(GCodeProcessor::ETags::Total_Weight_Placeholder)));
+    this->placeholder_parser().set("total_cost", new ConfigOptionString(GCodeProcessor::reserved_tag(GCodeProcessor::ETags::Total_Cost_Placeholder)));
+    this->placeholder_parser().set("total_wipe_tower_cost", new ConfigOptionString(GCodeProcessor::reserved_tag(GCodeProcessor::ETags::Total_Wipe_Tower_Cost_Placeholder)));
+    this->placeholder_parser().set("total_wipe_tower_filament", new ConfigOptionString(GCodeProcessor::reserved_tag(GCodeProcessor::ETags::Total_Wipe_Tower_Filament_Placeholder)));
 
     // Sync variant-mapped params into placeholder_parser before processing start gcode
     update_placeholder_parser_with_variant_params();

src/libslic3r/GCode.hpp

@@ -1004,6 +1004,7 @@ protected:
         size_t                                                  num_objects,
         size_t                                                  num_islands);
 
+    friend class OozePrevention;
     friend class Wipe;
     friend class WipeTowerIntegration;
     friend class PressureEqualizer;

src/libslic3r/GCode/GCodeProcessor.cpp

@@ -120,7 +120,13 @@ const std::vector<std::string> GCodeProcessor::Reserved_Tags = {
     "@PRINT_TIME_HOUR@",
     "@PRINT_TIME_MINUTE@",
     "@PRINT_TIME_SEC@",
-    "@USED_FILAMENT_LENGTH@"
+    "@USED_FILAMENT_LENGTH@",
+    "@NORMAL_PRINT_TIME@",
+    "@SILENT_PRINT_TIME@",
+    "@TOTAL_WEIGHT@",
+    "@TOTAL_COST@",
+    "@TOTAL_WIPE_TOWER_COST@",
+    "@TOTAL_WIPE_TOWER_FILAMENT@"
 };
 
 const std::vector<std::string> GCodeProcessor::Reserved_Tags_compatible = {
@@ -147,7 +153,13 @@ const std::vector<std::string> GCodeProcessor::Reserved_Tags_compatible = {
     "@PRINT_TIME_HOUR@",
     "@PRINT_TIME_MINUTE@",
     "@PRINT_TIME_SEC@",
-    "@USED_FILAMENT_LENGTH@"
+    "@USED_FILAMENT_LENGTH@",
+    "@NORMAL_PRINT_TIME@",
+    "@SILENT_PRINT_TIME@",
+    "@TOTAL_WEIGHT@",
+    "@TOTAL_COST@",
+    "@TOTAL_WIPE_TOWER_COST@",
+    "@TOTAL_WIPE_TOWER_FILAMENT@"
 };
 
 
@@ -1264,19 +1276,22 @@ void GCodeProcessor::run_post_process()
         return ret;
     };
 
-    // Process inline placeholders (print_time_total_sec, print_time_day, print_time_hour, print_time_minute, print_time_sec and used_filament_length)
+    // Process inline placeholders (print_time_*, used_filament_length and the print statistics known only after export)
     auto process_inline_placeholders = [&](std::string& gcode_line) {
         bool processed = false;
         // Every inline placeholder contains '@', so a line without one has nothing to replace.
         if (gcode_line.find('@') == std::string::npos)
             return processed;
 
-        const std::string& print_time_total_placeholder = reserved_tag(ETags::Print_Time_Total_Sec_Placeholder);
-        const std::string& print_time_day_placeholder = reserved_tag(ETags::Print_Time_Day_Placeholder);
-        const std::string& print_time_hour_placeholder = reserved_tag(ETags::Print_Time_Hour_Placeholder);
-        const std::string& print_time_minute_placeholder = reserved_tag(ETags::Print_Time_Minute_Placeholder);
-        const std::string& print_time_sec_placeholder = reserved_tag(ETags::Print_Time_Sec_Placeholder);
-        const std::string& used_filament_placeholder = reserved_tag(ETags::Used_Filament_Length_Placeholder);
+        auto replace_tag = [&gcode_line, &processed](ETags tag, const std::string& value) {
+            const std::string& placeholder = reserved_tag(tag);
+            size_t pos = gcode_line.find(placeholder);
+            while (pos != std::string::npos) {
+                gcode_line.replace(pos, placeholder.length(), value);
+                processed = true;
+                pos = gcode_line.find(placeholder, pos + value.length());
+            }
+        };
 
         double print_time_total_sec = m_time_processor.machines[static_cast<size_t>(PrintEstimatedStatistics::ETimeMode::Normal)].time;
         if (print_time_total_sec < 0.0)
@@ -1289,70 +1304,31 @@ void GCodeProcessor::run_post_process()
         int print_time_minute = (day_remainder_seconds % 3600) / 60;
         int print_time_sec = day_remainder_seconds % 60;
 
-        // Replace print_time_total_sec
-        size_t pos = gcode_line.find(print_time_total_placeholder);
-        while (pos != std::string::npos) {
-            char buf[64];
-            sprintf(buf, "%.2f", print_time_total_sec);
-            gcode_line.replace(pos, print_time_total_placeholder.length(), buf);
-            processed = true;
-            pos = gcode_line.find(print_time_total_placeholder, pos + strlen(buf));
+        double total_filament_mm = 0.0;
+        for (const auto& mm : filament_mm) {
+            total_filament_mm += mm;
         }
 
-        // Replace print_time_day
-        pos = gcode_line.find(print_time_day_placeholder);
-        while (pos != std::string::npos) {
-            char buf[64];
-            sprintf(buf, "%d", print_time_day);
-            gcode_line.replace(pos, print_time_day_placeholder.length(), buf);
-            processed = true;
-            pos = gcode_line.find(print_time_day_placeholder, pos + strlen(buf));
-        }
-
-        // Replace print_time_hour
-        pos = gcode_line.find(print_time_hour_placeholder);
-        while (pos != std::string::npos) {
-            char buf[64];
-            sprintf(buf, "%d", print_time_hour);
-            gcode_line.replace(pos, print_time_hour_placeholder.length(), buf);
-            processed = true;
-            pos = gcode_line.find(print_time_hour_placeholder, pos + strlen(buf));
-        }
-
-        // Replace print_time_minute
-        pos = gcode_line.find(print_time_minute_placeholder);
-        while (pos != std::string::npos) {
-            char buf[64];
-            sprintf(buf, "%d", print_time_minute);
-            gcode_line.replace(pos, print_time_minute_placeholder.length(), buf);
-            processed = true;
-            pos = gcode_line.find(print_time_minute_placeholder, pos + strlen(buf));
-        }
-
-        // Replace print_time_sec
-        pos = gcode_line.find(print_time_sec_placeholder);
-        while (pos != std::string::npos) {
-            char buf[64];
-            sprintf(buf, "%d", print_time_sec);
-            gcode_line.replace(pos, print_time_sec_placeholder.length(), buf);
-            processed = true;
-            pos = gcode_line.find(print_time_sec_placeholder, pos + strlen(buf));
-        }
-
-        // Replace used_filament_length
-        pos = gcode_line.find(used_filament_placeholder);
-        while (pos != std::string::npos) {
-            double total_filament_mm = 0.0;
-            for (const auto& mm : filament_mm) {
-                total_filament_mm += mm;
-            }
-            double used_filament_length = total_filament_mm / 1000.0; // Convert mm to m
-            char buf[64];
-            sprintf(buf, "%.2f", used_filament_length);
-            gcode_line.replace(pos, used_filament_placeholder.length(), buf);
-            processed = true;
-            pos = gcode_line.find(used_filament_placeholder, pos + strlen(buf));
-        }
+        replace_tag(ETags::Print_Time_Total_Sec_Placeholder, Slic3r::float_to_string_decimal_point(print_time_total_sec, 2));
+        replace_tag(ETags::Print_Time_Day_Placeholder, std::to_string(print_time_day));
+        replace_tag(ETags::Print_Time_Hour_Placeholder, std::to_string(print_time_hour));
+        replace_tag(ETags::Print_Time_Minute_Placeholder, std::to_string(print_time_minute));
+        replace_tag(ETags::Print_Time_Sec_Placeholder, std::to_string(print_time_sec));
+        replace_tag(ETags::Used_Filament_Length_Placeholder,
+                    Slic3r::float_to_string_decimal_point(total_filament_mm / 1000.0, 2)); // Convert mm to m
+        // Same values as the print statistics that filename_format gets (PrintStatistics::config(), filled in by
+        // update_print_estimated_stats() in GCode.cpp), which runs only after this post-processing.
+        replace_tag(ETags::Normal_Print_Time_Placeholder, get_time_dhm(PrintEstimatedStatistics::ETimeMode::Normal));
+        replace_tag(ETags::Silent_Print_Time_Placeholder, is_stealth_time_estimator_enabled() ?
+                                                              get_time_dhm(PrintEstimatedStatistics::ETimeMode::Stealth) :
+                                                              short_time("N/A"));
+        const double total_cost = filament_total_cost + m_print->config().time_cost.value * print_time_total_sec / 3600.0;
+        replace_tag(ETags::Total_Weight_Placeholder, Slic3r::float_to_string_decimal_point(filament_total_g, 2));
+        replace_tag(ETags::Total_Cost_Placeholder, Slic3r::float_to_string_decimal_point(total_cost, 2));
+        replace_tag(ETags::Total_Wipe_Tower_Cost_Placeholder,
+                    Slic3r::float_to_string_decimal_point(m_print->print_statistics().total_wipe_tower_cost, 2));
+        replace_tag(ETags::Total_Wipe_Tower_Filament_Placeholder,
+                    Slic3r::float_to_string_decimal_point(m_print->print_statistics().total_wipe_tower_filament, 2));
 
         return processed;
     };

src/libslic3r/GCode/GCodeProcessor.hpp

@@ -601,6 +601,12 @@ inline constexpr float DEFAULT_FILAMENT_DENSITY = 1.245f;
             Print_Time_Minute_Placeholder,
             Print_Time_Sec_Placeholder,
             Used_Filament_Length_Placeholder,
+            Normal_Print_Time_Placeholder,
+            Silent_Print_Time_Placeholder,
+            Total_Weight_Placeholder,
+            Total_Cost_Placeholder,
+            Total_Wipe_Tower_Cost_Placeholder,
+            Total_Wipe_Tower_Filament_Placeholder,
         };
 
         static const std::string& reserved_tag(ETags tag) { return s_IsBBLPrinter ? Reserved_Tags[static_cast<unsigned char>(tag)] : Reserved_Tags_compatible[static_cast<unsigned char>(tag)]; }

src/libslic3r/GCode/ToolOrdering.cpp

@@ -1276,6 +1276,13 @@ void ToolOrdering::collect_extruder_statistics(bool prime_multi_material)
         sort_remove_duplicates(m_all_printing_extruders);
     }
 
+    m_last_layer_per_extruder.clear();
+    for (const LayerTools& lt : m_layer_tools) {
+        for (unsigned int ext : lt.extruders) {
+            m_last_layer_per_extruder[ext] = lt.print_z;
+        }
+    }
+
     if (prime_multi_material && ! m_all_printing_extruders.empty()) {
         // Reorder m_all_printing_extruders in the sequence they will be primed, the last one will be m_first_printing_extruder.
         // Then set m_first_printing_extruder to the 1st extruder primed.
@@ -3664,5 +3671,11 @@ int WipingExtrusions::get_support_interface_extruder_overrides(const PrintObject
     return -1;
 }
 
-
+bool ToolOrdering::is_last_extrusion_layer(coordf_t print_z, unsigned int extruder_id) const
+{
+    auto it = m_last_layer_per_extruder.find(extruder_id);
+    if (it == m_last_layer_per_extruder.end())
+        return true;
+    return print_z >= it->second - EPSILON;
+}
 } // namespace Slic3r

src/libslic3r/GCode/ToolOrdering.hpp

@@ -370,6 +370,7 @@ public:
                                                   std::vector<int> & initial_filaments);
 
     bool                has_non_support_filament(const PrintConfig &config);
+    bool                is_last_extrusion_layer(coordf_t print_z, unsigned int extruder_id) const;
 
 private:
     void				initialize_layers(std::vector<coordf_t> &zs);
@@ -413,6 +414,8 @@ private:
     // which keeps every legacy per-object code path bit-identical (loops over an empty map are
     // no-ops; downstream emission falls through to the per-object branch).
     std::map<unsigned int, std::map<LayerTools::MixedSubLayerGroup::VolumeKey, std::vector<size_t>>> m_gradient_volume_layers;
+    // Map: extruder_id -> print_z (z coordinate) of the last layer it is used on
+    std::map<unsigned int, coordf_t> m_last_layer_per_extruder;
     const PrintObject*         m_print_object_ptr = nullptr;
     Print*                     m_print;
     bool                       m_sorted = false;

src/libslic3r/PNGReadWrite.cpp

@@ -211,6 +211,35 @@ bool decode_colored_png(const ReadBuf &in_buf, ImageColorscale &out_img)
     return decode_colored_png(stream, out_img);
 }
 
+bool is_decodable_8bit_png(const ReadBuf &pngbuf)
+{
+    static const constexpr int PNG_SIG_BYTES = 8;
+
+    struct ReadBufStream stream{pngbuf};
+    std::vector<png_byte> sig(PNG_SIG_BYTES, 0);
+    stream.read(sig.data(), PNG_SIG_BYTES);
+    if (!png_check_sig(sig.data(), PNG_SIG_BYTES))
+        return false;
+
+    PNGDescr dsc;
+    dsc.png = png_create_read_struct(PNG_LIBPNG_VER_STRING, nullptr, nullptr, nullptr);
+    if (!dsc.png)
+        return false;
+    dsc.info = png_create_info_struct(dsc.png);
+    if (!dsc.info)
+        return false;
+
+    if (!png_read_header_guarded(dsc.png, dsc.info, &stream, PNG_SIG_BYTES))
+        return false;
+
+    const size_t color_type = png_get_color_type(dsc.png, dsc.info);
+    const size_t bit_depth  = png_get_bit_depth(dsc.png, dsc.info);
+    const bool   grey       = color_type == PNG_COLOR_TYPE_GRAY;
+    const bool   colour     = color_type == PNG_COLOR_TYPE_RGB || color_type == PNG_COLOR_TYPE_RGB_ALPHA;
+    return png_get_image_width(dsc.png, dsc.info) > 0 && png_get_image_height(dsc.png, dsc.info) > 0 &&
+           bit_depth == 8 && (grey || colour);
+}
+
 
 // Down to earth function to store a packed RGB image to file. Mostly useful for debugging purposes.
 // Based on https://www.lemoda.net/c/write-png/

src/libslic3r/PNGReadWrite.hpp

@@ -50,6 +50,9 @@ struct ReadBuf { const void *buf = nullptr; const size_t sz = 0; };
 
 bool is_png(const ReadBuf &pngbuf);
 
+// True if decode_png() or decode_colored_png() would accept these bytes, judged from the header alone.
+bool is_decodable_8bit_png(const ReadBuf &pngbuf);
+
 struct ReadBufStream: public IStream {
     const ReadBuf &rbuf_ref;
     size_t pos = 0;

src/libslic3r/PerimeterGenerator.cpp

@@ -62,7 +62,12 @@ public:
     // Depth in the hierarchy. External perimeter has depth = 0. An external perimeter could be both a contour and a hole.
     unsigned short                      depth;
     // ORCA: an external hole perimeter touching the next outer wall all around, with nothing between them.
+    // E.g. a 1mm tube wall with 0.5mm walls: 2 lines, the contour's outer wall and the hole's.
     bool                                is_thin_wall_hole = false;
+    // ORCA: an external hole perimeter with no room for an inner wall beside it, at most gap fill. Every thin wall
+    // hole is one, and so is e.g. a 1.5mm tube wall with 0.5mm walls: 3 lines, the two outer walls and gap fill
+    // between them. A 2mm tube wall has room for an inner wall a side and is not. Only set for Inner/Outer/Inner.
+    bool                                is_narrow_wall_hole = false;
     // Children contour, may be both CCW and CW oriented (outer contours or holes).
     std::vector<PerimeterGeneratorLoop> children;
 
@@ -572,7 +577,8 @@ static ExtrusionEntityCollection traverse_extrusions(const PerimeterGenerator& p
                 extrusion_coll.append(std::move(extrusion_loop));
                 // Orca: Reverse the order of paths for thin wall holes. We define thin wall hole as a hole with only one perimeter.
                 const bool thin_wall_hole = !pg_extrusion.is_contour && pg_extrusions.size() == 2;
-                if (thin_wall_hole && perimeter_generator.config->wall_sequence != WallSequence::OuterInner)
+                if (thin_wall_hole && perimeter_generator.config->wall_sequence != WallSequence::OuterInner &&
+                    !perimeter_generator.outer_walls_first_for_brim())
                     std::reverse(extrusion_coll.entities.begin(), extrusion_coll.entities.end());
             }
             else {
@@ -1690,13 +1696,24 @@ void PerimeterGenerator::process_classic()
 
                 last = std::move(offsets);
 
-                // ORCA: a thin wall hole has no room for gap fill or an inner wall anywhere beside its outer wall.
+                // ORCA: a thin wall hole has no room for gap fill or an inner wall anywhere beside its outer wall, a
+                // narrow wall hole none for an inner wall, the room the next loop is offset by below.
                 if (i == 0 && ! holes[0].empty()) {
-                    const float    room  = float(0.5 * (ext_perimeter_spacing2 + gap_fill_min_width));
-                    const Polygons reach = to_polygons(offset2_ex(last, -room, room + float(SCALED_EPSILON)));
-                    for (PerimeterGeneratorLoop &hole : holes[0])
-                        hole.is_thin_wall_hole = intersection_pl(Polylines{ hole.polygon.split_at_first_point() },
-                            ClipperUtils::clip_clipper_polygons_with_subject_bbox(reach, get_extents(hole.polygon).inflated(SCALED_EPSILON))).empty();
+                    auto reach = [&last](double room) {
+                        return to_polygons(offset2_ex(last, -float(room), float(room) + float(SCALED_EPSILON)));
+                    };
+                    auto out_of_reach = [](const Polygon &hole, const Polygons &reach) {
+                        return intersection_pl(Polylines{ hole.split_at_first_point() },
+                            ClipperUtils::clip_clipper_polygons_with_subject_bbox(reach, get_extents(hole).inflated(SCALED_EPSILON))).empty();
+                    };
+                    // Only Inner/Outer/Inner orders narrow wall holes apart.
+                    const bool     narrow_holes_ordered = this->config->wall_sequence == WallSequence::InnerOuterInner;
+                    const Polygons gap_fill_reach       = reach(0.5 * (ext_perimeter_spacing2 + gap_fill_min_width));
+                    const Polygons inner_wall_reach     = narrow_holes_ordered ? reach(ext_perimeter_spacing2 + min_spacing / 2.) : Polygons();
+                    for (PerimeterGeneratorLoop &hole : holes[0]) {
+                        hole.is_thin_wall_hole   = out_of_reach(hole.polygon, gap_fill_reach);
+                        hole.is_narrow_wall_hole = narrow_holes_ordered && out_of_reach(hole.polygon, inner_wall_reach);
+                    }
                 }
 
                 //BBS: refer to superslicer
@@ -1835,18 +1852,16 @@ void PerimeterGenerator::process_classic()
 
             // if brim will be printed, reverse the order of perimeters so that
             // we continue inwards after having finished the brim
-            // TODO: add test for perimeter order
             bool is_outer_wall_first = this->config->wall_sequence == WallSequence::OuterInner;
-            if (is_outer_wall_first ||
-                //BBS: always print outer wall first when there indeed has brim.
-                // btLeadingEdgeOnly is an outer brim too (a belt brim at the part's first contact).
-                (this->layer_id == 0 &&
-                    (this->object_config->brim_type == BrimType::btOuterOnly ||
-                     this->object_config->brim_type == BrimType::btLeadingEdgeOnly) &&
-                    this->object_config->brim_width.value > 0))
+            // Orca: a contour with only a narrow wall hole beside it has nothing to sandwich, and prints the hole first,
+            // then the contour, then the gap fill between them, as Arachne does.
+            const PerimeterGeneratorLoops &island_loops = contours.front();
+            const bool narrow_wall_hole_island = island_loops.size() == 1 && island_loops.front().children.size() == 1 &&
+                                                 island_loops.front().children.front().is_narrow_wall_hole;
+            if (is_outer_wall_first || this->outer_walls_first_for_brim())
                 entities.reverse();
             // Orca: sandwich mode. Apply after 1st layer.
-            else if ((this->config->wall_sequence == WallSequence::InnerOuterInner) && layer_id > 0){
+            else if ((this->config->wall_sequence == WallSequence::InnerOuterInner) && layer_id > 0 && !narrow_wall_hole_island){
                 entities.reverse(); // reverse all entities - order them from external to internal
                 if(entities.entities.size()>2){ // 3 walls minimum needed to do inner outer inner ordering
                     int position = 0; // index to run the re-ordering for multiple external perimeters in a single island.
@@ -2412,11 +2427,25 @@ std::vector<PerimeterGeneratorArachneExtrusion> reorderPerimetersByProximity(std
 
     // Function to reorder perimeters starting from a given reference index
     auto reorderFromReference = [&](int referenceIndex) {
-        std::unordered_set<int> firstLevelIndices;
-        firstLevelIndices.insert(referenceIndex);
-
-        // Find first level touching perimeters
-        std::vector<int> firstLevelTouchingIndices = findAllTouchingPerimeters(entities, firstLevelIndices, threshold_external, threshold_internal, 1);
+        // Find first level touching perimeters. The odd centre line of a wall too narrow for two inner walls is shared
+        // by the outer walls on both sides, so those join this island and are printed before it too, holes first.
+        std::vector<int> outerIndices{referenceIndex};
+        std::vector<int> firstLevelTouchingIndices;
+        for (size_t next = 0; next < outerIndices.size(); ++next)
+            for (int idx : findAllTouchingPerimeters(entities, {outerIndices[next]}, threshold_external, threshold_internal, 1)) {
+                if (std::find(firstLevelTouchingIndices.begin(), firstLevelTouchingIndices.end(), idx) != firstLevelTouchingIndices.end())
+                    continue;
+                firstLevelTouchingIndices.push_back(idx);
+                if (!entities[idx].extrusion->is_odd)
+                    continue;
+                for (size_t i = 0; i < entities.size(); ++i)
+                    if (entities[i].extrusion->inset_idx == 0 && includedIndices.count(int(i)) == 0 &&
+                        std::find(outerIndices.begin(), outerIndices.end(), int(i)) == outerIndices.end() &&
+                        arachne_lines_touch(*entities[i].extrusion, *entities[idx].extrusion, double(threshold_external)))
+                        outerIndices.push_back(int(i));
+            }
+        std::stable_partition(outerIndices.begin(), outerIndices.end(),
+                              [&entities](int idx) { return entities[idx].extrusion->is_closed && !entities[idx].is_contour; });
         // Bring the largest first level perimeter to the front
         // The longest first neighbour is most likely the dominant proximate perimeter
         // hence printing it immediately after the external perimeter should speed things up
@@ -2427,8 +2456,10 @@ std::vector<PerimeterGeneratorArachneExtrusion> reorderPerimetersByProximity(std
             std::iter_swap(maxIt, firstLevelTouchingIndices.end() - 1);
         }
         // Insert first level perimeters into reordered list
-        reordered.push_back(entities[referenceIndex]);
-        includedIndices.insert(referenceIndex);
+        for (int idx : outerIndices) {
+            reordered.push_back(entities[idx]);
+            includedIndices.insert(idx);
+        }
 
         for (int idx : firstLevelTouchingIndices) {
             if (includedIndices.count(idx) == 0) {
@@ -2757,7 +2788,7 @@ void PerimeterGenerator::process_arachne()
         
         if (layer_id == 0){ // disable inner outer inner algorithm after the first layer
         	is_outer_wall_first =
-            	this->config->wall_sequence == WallSequence::OuterInner;
+            	this->config->wall_sequence == WallSequence::OuterInner || this->outer_walls_first_for_brim();
         }
         if (is_outer_wall_first) {
             start_perimeter = 0;
@@ -3042,6 +3073,16 @@ ExPolygons PerimeterGenerator::printable_slices(const ExPolygons &slices) const
     return min_width > EPSILON ? opening_ex(slices, float(scale_(min_width / 2.))) : slices;
 }
 
+bool PerimeterGenerator::outer_walls_first_for_brim() const
+{
+    return layer_id == 0 && brim_puts_outer_walls_first(object_config->brim_type.value, object_config->brim_width.value);
+}
+
+bool brim_puts_outer_walls_first(BrimType brim_type, double brim_width)
+{
+    return brim_width > 0 && (brim_type == btOuterOnly || brim_type == btOuterAndInner || brim_type == btLeadingEdgeOnly);
+}
+
 std::vector<Polygons> PerimeterGenerator::generate_lower_polygons_series(float width)
 {
     float nozzle_diameter = print_config->nozzle_diameter.get_at(config->outer_wall_filament_id - 1);

src/libslic3r/PerimeterGenerator.hpp

@@ -164,6 +164,8 @@ public:
     Polygons    lower_slices_polygons() const { return m_lower_slices_polygons; }
     // ORCA: the slices less the slivers the wall generator prints nothing for, so they never count as support.
     ExPolygons  printable_slices(const ExPolygons &slices) const;
+    // ORCA: whether this layer prints its outer walls first for the brim, see brim_puts_outer_walls_first().
+    bool        outer_walls_first_for_brim() const;
 
 private:
     std::vector<Polygons>     generate_lower_polygons_series(float width);
@@ -183,6 +185,10 @@ private:
     Polygons    m_lower_slices_polygons;
 };
 
+// ORCA: a brim against the outer walls makes the first layer print them first, whatever the wall sequence, so the
+// brim runs straight on into the outer wall. Auto, ear and painted brims may leave the outer walls bare.
+bool brim_puts_outer_walls_first(BrimType brim_type, double brim_width);
+
 }
 
 #endif

src/libslic3r/Preset.cpp

@@ -2293,6 +2293,7 @@ void PresetCollection::load_project_embedded_presets(std::vector<Preset*>& proje
                 BOOST_LOG_TRIVIAL(error) << boost::format("can not find parent for config %1%!")%preset->file;
                 continue;
             }
+            extend_default_config_length(config, false, {});
             preset->config.update_diff_values_to_child_config(config, extruder_id_name, extruder_variant_name, *key_set1, *key_set2);
             //preset->config.apply(std::move(config));
             Preset::normalize(preset->config);

src/libslic3r/Preset.hpp

@@ -756,7 +756,14 @@ public:
     Preset&         get_edited_preset()         { return m_edited_preset; }
     const Preset&   get_edited_preset() const   { return m_edited_preset; }
 
-    const Preset& get_selected_preset_base() const { return *get_preset_base(m_presets[m_idx_selected]); }
+    // The root of the selected preset's inherits chain, or the selected preset itself when
+    // the chain names a preset that is not loaded (e.g. a vendor that is not installed).
+    const Preset& get_selected_preset_base() const
+    {
+        const Preset &selected = m_presets[m_idx_selected];
+        const Preset *base     = get_preset_base(selected);
+        return base ? *base : selected;
+    }
 
     // Return the last saved preset.
 //  const Preset&   get_saved_preset() const { return m_saved_preset; }

src/libslic3r/PrintObject.cpp

@@ -17,6 +17,7 @@
 #include "I18N.hpp"
 #include "Layer.hpp"
 #include "MutablePolygon.hpp"
+#include "PerimeterGenerator.hpp"
 #include "PrintBase.hpp"
 #include "PrintConfig.hpp"
 #include "SLA/IndexedMesh.hpp"
@@ -1464,15 +1465,13 @@ bool PrintObject::invalidate_state_by_config_options(
             || opt_key == "top_surface_speed") {
             // Brim is printed below supports, support invalidates brim and skirt.
             steps.emplace_back(posSupportMaterial);
-            if (opt_key == "brim_type") {
-                const auto* old_brim_type = old_config.option<ConfigOptionEnum<BrimType>>(opt_key);
-                const auto* new_brim_type = new_config.option<ConfigOptionEnum<BrimType>>(opt_key);
-                //BBS: When switch to manual brim, the object must have brim, then re-generate perimeter
-                //to make the wall order of first layer to be outer-first
-                // btLeadingEdgeOnly is printed as an outer brim (Brim.cpp, BeltBrim.cpp), so it
-                // takes part in the same first-layer wall order rule.
-                if (old_brim_type->value == btOuterOnly || new_brim_type->value == btOuterOnly ||
-                    old_brim_type->value == btLeadingEdgeOnly || new_brim_type->value == btLeadingEdgeOnly)
+            if (opt_key == "brim_type" || opt_key == "brim_width") {
+                // Regenerate the walls when the brim starts or stops putting the first layer's outer walls first.
+                auto outer_walls_first = [](const ConfigOptionResolver &config) {
+                    return brim_puts_outer_walls_first(config.option<ConfigOptionEnum<BrimType>>("brim_type")->value,
+                                                       config.option<ConfigOptionFloat>("brim_width")->value);
+                };
+                if (outer_walls_first(old_config) != outer_walls_first(new_config))
                     steps.emplace_back(posPerimeters);
             }
         } else if (

src/libslic3r/Support/SupportCommon.cpp

@@ -707,8 +707,10 @@ void tree_supports_generate_paths(
                                             false);
         }
         if (eec) {
-            std::reverse(eec->entities.begin(), eec->entities.end());
-            dst.emplace_back(eec.release());
+            if (!eec->empty()) {
+                std::reverse(eec->entities.begin(), eec->entities.end());
+                dst.emplace_back(eec.release());
+            }
         }
     }
 }
@@ -1825,12 +1827,7 @@ void generate_support_toolpaths(
                     no_sort = true;
                 } else if (support_params.support_style == SupportMaterialStyle::smsTreeOrganic &&
                            (config.support_base_pattern == smpNone || config.support_base_pattern == smpDefault)) {
-                    // Orca: A special case for the hollow Organic supports
-                    // Orca: If the tree supports are too tall, use a double wall to make it stronger
-                    SupportParameters support_params2 = support_params;
-                    if (support_layer.print_z > 100.0)
-                        support_params2.tree_branch_diameter_double_wall_area_scaled = 0.1;
-                    tree_supports_generate_paths(base_layer.extrusions, base_layer.polygons_to_extrude(), flow, support_params2);
+                    tree_supports_generate_paths(base_layer.extrusions, base_layer.polygons_to_extrude(), flow, support_params);
                     done = true;
                 }
                 if (! done)

src/libslic3r/Support/TreeSupport.cpp

@@ -2149,7 +2149,9 @@ void TreeSupport::draw_circles()
     const bool with_lightning_infill = m_support_params.base_fill_pattern == ipLightning;
     coordf_t support_extrusion_width = m_support_params.support_extrusion_width;
     const float tree_brim_width = config.tree_support_brim_width.value;
-
+    // Reinforce branches moving more than half a support-line width between layers.
+    // Square the threshold for comparison with the squared XY movement below.
+    const double max_move_sq = sqr(double(scale_(m_object_config->support_line_width / 2)));
     // Belt floor: the first object layer is not on a flat bed — it rests on the
     // tilted, moving belt. So the first-object-layer adhesion features (the tree
     // support brim, the hybrid first-layer base expansion) must be suppressed:
@@ -2201,7 +2203,7 @@ void TreeSupport::draw_circles()
                 size_t           first_base_roof_area = 0;
                 bool             floor_interface_as_base = false;
                 bool has_circle_node = false;
-                bool need_extra_wall = false;
+                ExPolygons extra_wall_areas;
                 ExPolygons collision_sharp_tails;
                 ExPolygons collision_base;
                 auto             get_collision = [&](bool sharp_tail) -> ExPolygons             &{
@@ -2279,7 +2281,6 @@ void TreeSupport::draw_circles()
                         // area = diff_clipped({ ExPolygon(circle) }, get_collision(node.is_sharp_tail && node.distance_to_top <= 0));
 
                         if (!area.empty()) has_circle_node = true;
-                        if (node.need_extra_wall) need_extra_wall = true;
 
                         // merge overhang to get a smoother interface surface
                         // Do not merge when buildplate_only is on, because some underneath nodes may have been deleted.
@@ -2294,6 +2295,10 @@ void TreeSupport::draw_circles()
                         }
                     }
 
+                    // Use the Pythagorean theorem to compare movement magnitude (dx² + dy²) without a square root.
+                    if (node.is_processed && node.movement.cast<double>().squaredNorm() > max_move_sq)
+                        append(extra_wall_areas, area);
+
                     if (obj_layer_nr>0 && node.distance_to_top < 0)
                         append(roof_gap_areas, area);
                     else if (obj_layer_nr > 0 && node.support_roof_layers_below == 1 &&
@@ -2530,7 +2535,8 @@ void TreeSupport::draw_circles()
                     //if (area(expoly) < SQ(scale_(1))) continue;
                     area_groups.emplace_back(&expoly, SupportLayer::BaseType, max_layers_above_base);
                     area_groups.back().need_infill = overlaps({ expoly }, area_poly);
-                    area_groups.back().need_extra_wall = need_extra_wall && !area_groups.back().need_infill;
+                    area_groups.back().need_extra_wall = !area_groups.back().need_infill &&
+                        !extra_wall_areas.empty() && overlaps({expoly}, extra_wall_areas);
                 }
                 for (size_t roof_idx = 0; roof_idx < ts_layer->roof_areas.size(); ++roof_idx) {
                     auto &expoly = ts_layer->roof_areas[roof_idx];
@@ -3433,11 +3439,6 @@ void TreeSupport::smooth_nodes()
         }
     }
     
-    float max_move = scale_(m_object_config->support_line_width / 2);
-    // if the branch is very tall, the tip also needs extra wall
-    float thresh_tall_branch = 100;
-    float thresh_dist_to_top = 30;
-
     for (int layer_nr = 0; layer_nr< contact_nodes.size(); layer_nr++) {
         std::vector<SupportNode *> &curr_layer_nodes = contact_nodes[layer_nr];
         if (curr_layer_nodes.empty()) continue;
@@ -3447,20 +3448,17 @@ void TreeSupport::smooth_nodes()
                 std::vector<double> radii;
                 std::vector<SupportNode *>   branch;
                 SupportNode *              p_node = node;
-                float                        total_height = 0;
                 // add a fixed head if it's not a polygon node, see STUDIO-4403
                 // Polygon node can't be added because the move distance might be huge, making the nodes in between jump and dangling
                 if (node->child && node->child->type!=ePolygon) {
                     pts.push_back(p_node->child->position);
                     radii.push_back(p_node->child->radius);
                     branch.push_back(p_node->child);
-                    total_height += p_node->child->height;
                 }
                 do {
                     pts.push_back(p_node->position);
                     radii.push_back(p_node->radius);
                     branch.push_back(p_node);
-                    total_height += p_node->height;
                     p_node = p_node->parent;
                 } while (p_node && !p_node->is_processed);
                 if (pts.size() < 3) continue;
@@ -3479,9 +3477,6 @@ void TreeSupport::smooth_nodes()
                             branch[i]->radius = radii1[i];
                             branch[i]->movement = (pts[i + 1] - pts[i - 1]) / 2;
                             branch[i]->is_processed = true;
-                            if (branch[i]->parents.size() > 1 || (branch[i]->movement.x() > max_move || branch[i]->movement.y() > max_move) ||
-                                (total_height > thresh_tall_branch && branch[i]->dist_mm_to_top < thresh_dist_to_top))
-                                branch[i]->need_extra_wall = true;
                             BOOST_LOG_TRIVIAL(info) << "smooth_nodes: layer_nr=" << layer_nr << ", i=" << i << ", pt=" << pt << ", movement=" << branch[i]->movement << ", radius=" << branch[i]->radius;
                         }
                     }
@@ -3489,13 +3484,6 @@ void TreeSupport::smooth_nodes()
                         std::swap(pts, pts1);
                         std::swap(radii, radii1);
                     }
-                    else {
-                        // interpolate need_extra_wall in the end
-                        for (size_t i = 1; i < branch.size() - 1; i++) {
-                            if (branch[i - 1]->need_extra_wall && branch[i + 1]->need_extra_wall)
-                                branch[i]->need_extra_wall = true;
-                        }
-                    }
                 }
             }
         }

src/libslic3r/Support/TreeSupport.hpp

@@ -135,7 +135,6 @@ struct SupportNode
     TreeNodeType   type            = eCircle;
     bool           is_corner       = false;
     bool           is_processed    = false;
-    bool           need_extra_wall = false;
     bool           is_sharp_tail   = false;
     bool           valid = true;
     ExPolygon      overhang; // when type==ePolygon, set this value to get original overhang area

src/libslic3r/TextureDisplacement.cpp

@@ -283,7 +283,7 @@ bool height_texture_has_color(const TextureDisplacementLayer &layer)
     return decode_height_texture(layer).has_color();
 }
 
-DecodedHeightTexture decode_height_texture(const TextureDisplacementLayer &layer)
+DecodedHeightTexture decode_height_texture(const TextureDisplacementLayer &layer, bool keep_decoded)
 {
     DecodedHeightTexture result;
     if (layer.empty())
@@ -351,13 +351,15 @@ DecodedHeightTexture decode_height_texture(const TextureDisplacementLayer &layer
                 }
         }
 
-        std::lock_guard<std::mutex> lock(g_decoded_texture_cache.mutex);
-        // Opportunistically drop entries for image_data that no longer exists anywhere, so the
-        // cache doesn't grow without bound across many add/remove-texture cycles in a long session.
-        auto &entries = g_decoded_texture_cache.entries;
-        for (auto it = entries.begin(); it != entries.end();)
-            it = it->second.first.expired() ? entries.erase(it) : std::next(it);
-        entries[key] = { std::weak_ptr<const std::vector<unsigned char>>(layer.image_data), result };
+        if (keep_decoded) {
+            std::lock_guard<std::mutex> lock(g_decoded_texture_cache.mutex);
+            // Opportunistically drop entries for image_data that no longer exists anywhere, so the
+            // cache doesn't grow without bound across many add/remove-texture cycles in a long session.
+            auto &entries = g_decoded_texture_cache.entries;
+            for (auto it = entries.begin(); it != entries.end();)
+                it = it->second.first.expired() ? entries.erase(it) : std::next(it);
+            entries[key] = { std::weak_ptr<const std::vector<unsigned char>>(layer.image_data), result };
+        }
     }
 
     // The image-adjustment panel's live edits, on top of the decode and before the smoothing. Before,

src/libslic3r/TextureDisplacement.hpp

@@ -599,8 +599,9 @@ DecodedHeightTexture downscale_height_texture(const DecodedHeightTexture &src, i
 // colour PNGs are accepted; for a colour source the height is its luminance, using the same
 // coefficients wxImage::ConvertToGreyscale() uses, so a texture imported as colour displaces exactly
 // as it did when the importer flattened it to grey on the way in. Returns an empty
-// DecodedHeightTexture if image_data is empty or is not a PNG at all.
-DecodedHeightTexture decode_height_texture(const TextureDisplacementLayer &layer);
+// DecodedHeightTexture if image_data is empty or is not a PNG at all. keep_decoded = false leaves the
+// result out of the decode cache, for one-off reads such as a picker thumbnail that must not hold full-size pixels.
+DecodedHeightTexture decode_height_texture(const TextureDisplacementLayer &layer, bool keep_decoded = true);
 
 // decode_height_texture(layer).has_color(), answered from the decode cache rather than from a copy of the
 // texture - cheap enough to ask every frame. Smoothing does not change it, so the raw decode is what is read.

src/libslic3r/Utils.hpp

@@ -842,6 +842,13 @@ void load_string_file(const boost::filesystem::path& p, std::string& str);
 
 bool check_layer_id_pattern(const std::string& pattern, int layer_id);
 
+// On Windows, return an equivalent path carrying the extended-length ("\\?\" / "\\?\UNC\")
+// prefix so the Win32 APIs accept it past MAX_PATH even when LongPathsEnabled is off. The path
+// is made absolute and lexically normalized first, because the prefix disables normalisation.
+// A path that is already extended (or a device path) is returned unchanged; on other platforms,
+// or when an absolute path cannot be formed, the input is returned unchanged.
+boost::filesystem::path extended_path(const boost::filesystem::path& path);
+
 } // namespace Slic3r
 
 #if WIN32

src/libslic3r/miniz_extension.cpp

@@ -17,6 +17,7 @@
 
 #if defined(_MSC_VER) || defined(__MINGW64__)
 #include "boost/nowide/cstdio.hpp"
+#include "boost/nowide/convert.hpp"
 #endif
 
 #include "I18N.hpp"
@@ -62,7 +63,11 @@ bool open_zip(mz_zip_archive *zip, const char *fname, bool isread)
 
     FILE *f = nullptr;
 #if defined(_MSC_VER) || defined(__MINGW64__)
-    f = boost::nowide::fopen(fname, mode);
+    // fname is UTF-8 (the nowide contract). Route it through the shared extended-path helper so an
+    // archive stored past MAX_PATH opens even with LongPathsEnabled off.
+    const std::wstring wide_path = boost::nowide::widen(fname);
+    const std::string  extended  = boost::nowide::narrow(Slic3r::extended_path(boost::filesystem::path(wide_path)).wstring());
+    f = boost::nowide::fopen(extended.c_str(), mode);
 #elif defined(__GNUC__) && defined(_LARGEFILE64_SOURCE)
     f = fopen64(fname, mode);
 #else
@@ -101,6 +106,14 @@ bool close_zip(mz_zip_archive *zip, bool isread)
     }
     return ret;
 }
+
+#ifdef WIN32
+// mz_file_write_func writing an extracted entry into an already-open FILE*.
+size_t mz_write_to_cfile(void *opaque, mz_uint64 /*file_ofs*/, const void *buffer, size_t size)
+{
+    return std::fwrite(buffer, 1, size, static_cast<FILE *>(opaque));
+}
+#endif
 }
 
 bool open_zip_reader(mz_zip_archive *zip, const std::string &fname)
@@ -116,6 +129,36 @@ bool open_zip_writer(mz_zip_archive *zip, const std::string &fname)
 bool close_zip_reader(mz_zip_archive *zip) { return close_zip(zip, true); }
 bool close_zip_writer(mz_zip_archive *zip) { return close_zip(zip, false); }
 
+bool extract_zip_entry_to_file(mz_zip_archive *zip, mz_uint file_index, const boost::filesystem::path &dest_path)
+{
+    if (!zip)
+        return false;
+#ifdef WIN32
+    // Open the destination ourselves with a Windows extended-length path: miniz's narrow
+    // extract_to_file cannot be relied on past MAX_PATH with LongPathsEnabled off, and its wide
+    // variant takes a plain (unprefixed) path and a text-mode stream. This keeps the write binary.
+    FILE *file = ::_wfopen(Slic3r::extended_path(dest_path).wstring().c_str(), L"wb");
+    if (!file) {
+        zip->m_last_error = MZ_ZIP_FILE_OPEN_FAILED;
+        return false;
+    }
+
+    const bool written = mz_zip_reader_extract_to_callback(zip, file_index, mz_write_to_cfile, file, 0) != 0;
+    const bool closed  = std::fclose(file) == 0;
+    if (!written || !closed) {
+        if (written && !closed)
+            zip->m_last_error = MZ_ZIP_FILE_CLOSE_FAILED;
+        // Drop the partial entry rather than leave a truncated file behind.
+        boost::system::error_code ec;
+        boost::filesystem::remove(Slic3r::extended_path(dest_path), ec);
+        return false;
+    }
+    return true;
+#else
+    return mz_zip_reader_extract_to_file(zip, file_index, dest_path.string().c_str(), 0) != 0;
+#endif
+}
+
 std::string decode_archive_entry_path(mz_zip_archive *zip, const mz_zip_archive_file_stat &stat)
 {
     if (stat.m_is_utf8)
@@ -156,10 +199,13 @@ bool extract_archive_confined(const std::string &zip_path_utf8, const std::strin
         }
         const std::string dest_file = dest_dir + "/" + stat.m_filename;
         try {
+            // Use the extended-length form for every filesystem call so entries under a destination
+            // past MAX_PATH are created even with LongPathsEnabled off.
+            const boost::filesystem::path dest_path(dest_file);
+            const boost::filesystem::path io_dest = extended_path(dest_path);
             if (stat.m_is_directory) {
-                const boost::filesystem::path dest_path(dest_file);
-                if (!boost::filesystem::exists(dest_path))
-                    boost::filesystem::create_directories(dest_path);
+                if (!boost::filesystem::exists(io_dest))
+                    boost::filesystem::create_directories(io_dest);
                 continue;
             }
             if (stat.m_uncomp_size == 0) {
@@ -167,10 +213,9 @@ bool extract_archive_confined(const std::string &zip_path_utf8, const std::strin
                 continue;
             }
             // Replace a symlink at the destination rather than writing through it.
-            const boost::filesystem::path dest_path(dest_file);
-            if (boost::filesystem::is_symlink(boost::filesystem::symlink_status(dest_path)))
-                boost::filesystem::remove(dest_path);
-            if (!mz_zip_reader_extract_to_file(&archive, stat.m_file_index, dest_file.c_str(), 0)) {
+            if (boost::filesystem::is_symlink(boost::filesystem::symlink_status(io_dest)))
+                boost::filesystem::remove(io_dest);
+            if (!extract_zip_entry_to_file(&archive, stat.m_file_index, dest_path)) {
                 BOOST_LOG_TRIVIAL(error) << "Unzip: extract file " << stat.m_filename << " to dest " << dest_file << " failed";
                 close_zip_reader(&archive);
                 return false;

src/libslic3r/miniz_extension.hpp

@@ -1,6 +1,7 @@
 #ifndef MINIZ_EXTENSION_HPP
 #define MINIZ_EXTENSION_HPP
 
+#include <boost/filesystem/path.hpp>
 #include <string>
 #include <miniz.h>
 
@@ -13,6 +14,10 @@ bool close_zip_writer(mz_zip_archive *zip);
 std::string decode_archive_entry_path(mz_zip_archive *zip, const mz_zip_archive_file_stat &stat);
 // Extracts every entry of the archive under dest_dir. Nothing is written if any entry would resolve outside dest_dir.
 bool extract_archive_confined(const std::string &zip_path_utf8, const std::string &dest_dir);
+// Extracts one entry into dest_path, binary-safe and overwriting. On Windows the destination is
+// opened through an extended-length path so it works past MAX_PATH even with LongPathsEnabled off;
+// a partial file is removed if the write fails. False for a directory/unsupported entry or on error.
+bool extract_zip_entry_to_file(mz_zip_archive *zip, mz_uint file_index, const boost::filesystem::path &dest_path);
 
 class MZ_Archive {
 public:

src/libslic3r/utils.cpp

@@ -2254,5 +2254,45 @@ bool check_layer_id_pattern(const std::string& pattern, int layer_id){
     return mod >= 0 && mod < count;
 }
 
+boost::filesystem::path extended_path(const boost::filesystem::path& path) {
+#ifdef WIN32
+    namespace fs = boost::filesystem;
+
+    // Already extended, or an explicit device path (which is not subject to MAX_PATH and must not
+    // be absolutized or normalized): leave it alone.
+    {
+        fs::path prefix_candidate = path;
+        const std::wstring native = prefix_candidate.make_preferred().wstring();
+        if (native.rfind(L"\\\\?\\", 0) == 0 || native.rfind(L"\\\\.\\", 0) == 0)
+            return fs::path(native);
+    }
+
+    fs::path absolute = path;
+    if (!absolute.is_absolute()) {
+        boost::system::error_code ec;
+        absolute = fs::absolute(absolute, ec);
+        if (ec)
+            return path; // can't form a valid prefixed path from a relative one
+    }
+
+    // A trailing separator is redundant to the Win32 APIs, but lexically_normal() would rewrite it
+    // as a "." element, which the "\\?\" prefix (normalisation off) takes literally. Drop it first.
+    while (absolute.has_relative_path() && absolute.filename() == ".")
+        absolute = absolute.parent_path();
+
+    // The "\\?\" prefix turns off Win32 normalisation, so do it here first.
+    absolute = absolute.lexically_normal();
+
+    // Extended paths only recognize backslash separators.
+    const std::wstring native = absolute.make_preferred().wstring();
+    if (native.empty())
+        return path;
+    if (native.rfind(L"\\\\", 0) == 0)
+        return fs::path(L"\\\\?\\UNC\\" + native.substr(2)); // \\server\share\... -> \\?\UNC\server\share\...
+    return fs::path(L"\\\\?\\" + native);                    // C:\dir\... -> \\?\C:\dir\...
+#else
+    return path;
+#endif
+}
 
 }; // namespace Slic3r

src/libvgcode/src/Layers.cpp

@@ -75,7 +75,7 @@ std::vector<float> Layers::get_zs() const
 
 size_t Layers::get_layer_id_at(float z) const
 {
-    auto iter = std::upper_bound(m_items.begin(), m_items.end(), z, [](float z, const Item& item) { return item.z < z; });
+    auto iter = std::upper_bound(m_items.begin(), m_items.end(), z, [](float z, const Item& item) { return item.z > z; });
     return std::distance(m_items.begin(), iter);
 }
 

src/slic3r/CMakeLists.txt

@@ -222,6 +222,7 @@ set(SLIC3R_GUI_SOURCES
     GUI/Gizmos/GLGizmoUtils.hpp
     GUI/GLCanvas3D.cpp
     GUI/GLCanvas3D.hpp
+    GUI/SequentialPrintClearance.hpp
     GUI/GLModel.cpp
     GUI/GLModel.hpp
     GUI/GLSelectionRectangle.cpp
@@ -689,6 +690,8 @@ set(SLIC3R_GUI_SOURCES
     plugin/host/PluginHostUi.hpp
     plugin/host/PluginPages.cpp
     plugin/host/PluginPages.hpp
+    plugin/host/PluginResourceTextures.cpp
+    plugin/host/PluginResourceTextures.hpp
     plugin/CloudPluginService.cpp
     plugin/CloudPluginService.hpp
     plugin/PluginFsUtils.cpp
@@ -712,6 +715,9 @@ set(SLIC3R_GUI_SOURCES
     plugin/pluginTypes/pages/PagesPluginCapability.hpp
     plugin/pluginTypes/pages/PagesPluginCapability.cpp
     plugin/pluginTypes/pages/PagesPluginCapabilityTrampoline.hpp
+    plugin/pluginTypes/resourceTexture/ResourceTexturePluginCapability.hpp
+    plugin/pluginTypes/resourceTexture/ResourceTexturePluginCapability.cpp
+    plugin/pluginTypes/resourceTexture/ResourceTexturePluginCapabilityTrampoline.hpp
     plugin/pluginTypes/script/ScriptPluginCapability.hpp
     plugin/pluginTypes/script/ScriptPluginCapability.cpp
     plugin/pluginTypes/script/ScriptPluginCapabilityTrampoline.hpp

src/slic3r/GUI/AMSMaterialsSetting.cpp

@@ -85,6 +85,96 @@ static std::string float_to_string_with_precision(float value, int precision = 3
     return stream.str();
 }
 
+static std::string colour_to_ams_string(const wxColour& color)
+{
+    char col_buf[10];
+    sprintf(col_buf, "%02X%02X%02X%02X", (int)color.Red(), (int)color.Green(), (int)color.Blue(), (int)color.Alpha());
+    return col_buf;
+}
+
+static wxColour mix_colour(const wxColour& left, const wxColour& right, double ratio)
+{
+    ratio = std::max(0.0, std::min(1.0, ratio));
+    auto mix_channel = [ratio](unsigned char l, unsigned char r) {
+        return static_cast<unsigned char>(std::round(l + (r - l) * ratio));
+    };
+    return wxColour(mix_channel(left.Red(), right.Red()),
+                    mix_channel(left.Green(), right.Green()),
+                    mix_channel(left.Blue(), right.Blue()),
+                    mix_channel(left.Alpha(), right.Alpha()));
+}
+
+static std::vector<ColorPickerPopup::ColorItem> collect_ams_color_items(DevFilaSystem* fila_system)
+{
+    std::vector<ColorPickerPopup::ColorItem> items;
+    if (!fila_system) return items;
+
+    for (const auto& ams_pair : fila_system->GetAmsList()) {
+        DevAms* ams = ams_pair.second;
+        if (!ams) continue;
+
+        for (const auto& tray_pair : ams->GetTrays()) {
+            DevAmsTray* tray = tray_pair.second;
+            if (!tray || !tray->is_tray_info_ready()) continue;
+
+            ColorPickerPopup::ColorItem item;
+            for (const std::string& col : tray->cols) {
+                item.colors.emplace_back(DevAmsTray::decode_color(col));
+            }
+            if (item.colors.empty() && !tray->color.empty()) {
+                item.colors.emplace_back(DevAmsTray::decode_color(tray->color));
+            }
+            if (item.colors.empty()) continue;
+
+            item.ctype = item.colors.size() > 1 ? tray->ctype : 2;
+            items.emplace_back(std::move(item));
+        }
+    }
+
+    return items;
+}
+
+static std::vector<ColorPickerPopup::ColorItem> collect_preset_color_items(const std::string& filament_id)
+{
+    std::vector<ColorPickerPopup::ColorItem> items;
+    if (filament_id.empty()) return items;
+
+    auto* clr_query = GUI::wxGetApp().get_filament_color_code_query();
+    if (!clr_query) return items;
+
+    auto* agent = wxGetApp().getAgent();
+    const std::string catalog_id = agent ? agent->from_orca_filament_id(filament_id) : filament_id;
+    FilamentColorCodes* color_codes = clr_query->GetFilaInfoMap(wxString::FromUTF8(catalog_id));
+    if (!color_codes || !color_codes->GetFilamentColor2CodeMap()) return items;
+
+    std::set<std::string> seen;
+    for (const auto& color_pair : *color_codes->GetFilamentColor2CodeMap()) {
+        const FilamentColor& fila_color = color_pair.first;
+        FilamentColorCode* color_code = color_pair.second;
+        if (!color_code || fila_color.GetColors().empty()) continue;
+
+        ColorPickerPopup::ColorItem item;
+        item.ctype = fila_color.ColorCount() < 2 ? 2 :
+            (fila_color.m_color_type == FilamentColor::ColorType::GRADIENT_CLR ? 0 : 1);
+        item.name = color_code->GetFilaColorName();
+
+        std::string key = std::to_string(item.ctype);
+        for (const wxColour& color : fila_color.GetColors()) {
+            item.colors.emplace_back(color);
+            char rgba[9];
+            std::snprintf(rgba, sizeof(rgba), "%02X%02X%02X%02X",
+                static_cast<unsigned>(color.Red()), static_cast<unsigned>(color.Green()),
+                static_cast<unsigned>(color.Blue()), static_cast<unsigned>(color.Alpha()));
+            key += "|" + std::string(rgba);
+        }
+
+        if (item.colors.empty() || !seen.insert(key).second) continue;
+        items.emplace_back(std::move(item));
+    }
+
+    return items;
+}
+
 AMSMaterialsSetting::AMSMaterialsSetting(wxWindow *parent, wxWindowID id)
     : DPIDialog(parent, id, _L("AMS Materials Setting"), wxDefaultPosition, wxDefaultSize, wxCAPTION | wxCLOSE_BOX)
     , m_color_picker_popup(ColorPickerPopup(this))
@@ -740,8 +830,19 @@ void AMSMaterialsSetting::on_select_ok(wxCommandEvent &event)
     nozzle_temp_min.ToLong(&nozzle_temp_min_int);
     nozzle_temp_max.ToLong(&nozzle_temp_max_int);
     wxColour color = m_clr_picker->m_colour;
-    char col_buf[10];
-    sprintf(col_buf, "%02X%02X%02X%02X", (int)color.Red(), (int)color.Green(), (int)color.Blue(), (int)color.Alpha());
+    std::string tray_color = colour_to_ams_string(color);
+    std::vector<std::string> tray_colors;
+    int tray_ctype = 2;
+    // Only firmware advertising fun2[23] receives the manual multi-color fields.
+    if (obj->is_support_filament_manual_multi_color) {
+        for (const wxColour& selected_color : m_clr_picker->m_cols) {
+            tray_colors.emplace_back(colour_to_ams_string(selected_color));
+        }
+        if (tray_colors.empty()) {
+            tray_colors.emplace_back(tray_color);
+        }
+        tray_ctype = tray_colors.size() > 1 ? m_clr_picker->ctype : 2;
+    }
 
     if (ams_filament_id.empty() || nozzle_temp_min.empty() || nozzle_temp_max.empty() || m_filament_type.empty()) {
         BOOST_LOG_TRIVIAL(trace) << "Invalid Setting id";
@@ -760,13 +861,33 @@ void AMSMaterialsSetting::on_select_ok(wxCommandEvent &event)
                             << ", tray_info_idx (filament_id) = " << ams_filament_id
                             << ", setting_id = " << ams_setting_id
                             << ", tray_type = " << m_filament_type
-                            << ", tray_color = " << col_buf
+                            << ", tray_color = " << tray_color
                             << ", nozzle_temp_min = " << nozzle_temp_min_int
                             << ", nozzle_temp_max = " << nozzle_temp_max_int;
 
     // set filament
     if (m_is_third) {
-        obj->command_ams_filament_settings(ams_id, slot_id, ams_filament_id, ams_setting_id, std::string(col_buf), m_filament_type, nozzle_temp_min_int, nozzle_temp_max_int);
+        obj->command_ams_filament_settings(ams_id, slot_id, ams_filament_id, ams_setting_id, tray_color, m_filament_type, nozzle_temp_min_int, nozzle_temp_max_int,
+                                           tray_colors, tray_ctype);
+
+        // Refresh the edited tray immediately while its MQTT acknowledgement is pending.
+        DevAmsTray* tray = nullptr;
+        if (is_virtual_tray()) {
+            for (auto& virtual_tray : obj->vt_slot) {
+                if (virtual_tray.id == std::to_string(ams_id)) {
+                    tray = &virtual_tray;
+                    break;
+                }
+            }
+        } else {
+            tray = obj->GetFilaSystem()->GetAmsTray(std::to_string(ams_id), std::to_string(slot_id));
+        }
+        if (tray) {
+            tray->color = tray_color;
+            tray->cols = tray_colors;
+            tray->ctype = tray_ctype;
+            tray->set_hold_count();
+        }
     }
 
     //reset param
@@ -923,8 +1044,15 @@ void AMSMaterialsSetting::set_ctype(int ctype)
 
 void AMSMaterialsSetting::on_picker_color(wxCommandEvent& event)
 {
-    unsigned int color_num  = event.GetInt();
-    set_color(wxColour(color_num>>24&0xFF, color_num>>16&0xFF, color_num>>8&0xFF, color_num&0xFF));
+    std::vector<wxColour> colors = m_color_picker_popup.get_selected_colours();
+    if (colors.empty()) {
+        unsigned int color_num = event.GetInt();
+        colors.emplace_back(color_num >> 24 & 0xFF, color_num >> 16 & 0xFF, color_num >> 8 & 0xFF, color_num & 0xFF);
+    }
+
+    set_ctype(m_color_picker_popup.get_selected_ctype());
+    set_color(colors.front());
+    set_colors(colors);
 }
 
 void AMSMaterialsSetting::on_clr_picker(wxMouseEvent &event)
@@ -939,14 +1067,12 @@ void AMSMaterialsSetting::on_clr_picker(wxMouseEvent &event)
         }
     }
 
-    std::vector<wxColour> ams_colors;
-    obj->GetFilaSystem()->CollectAmsColors(ams_colors);
-
+    m_color_picker_popup.set_ams_colours(collect_ams_color_items(obj->GetFilaSystem().get()));
+    m_color_picker_popup.set_preset_colours(collect_preset_color_items(ams_filament_id));
+    m_color_picker_popup.set_def_colour(m_clr_picker->m_colour, m_clr_picker->m_cols, m_clr_picker->ctype);
     wxPoint img_pos = m_clr_picker->ClientToScreen(wxPoint(0, 0));
     wxPoint popup_pos(img_pos.x - m_color_picker_popup.GetSize().x - FromDIP(95), img_pos.y - FromDIP(65));
     m_color_picker_popup.Position(popup_pos, wxSize(0, 0));
-    m_color_picker_popup.set_ams_colours(ams_colors);
-    m_color_picker_popup.set_def_colour(m_clr_picker->m_colour);
     m_color_picker_popup.Popup();
 }
 
@@ -1735,7 +1861,46 @@ void ColorPicker::doRender(wxDC& dc)
     auto radius = m_show_full ? size.x / 2 - FromDIP(1) : size.x / 2;
     if (m_selected) radius -= FromDIP(1);
 
-    if (alpha == 0) {
+    if (m_show_full && m_cols.size() > 1) {
+        if (ctype == 0) {
+            const double center_x = size.x / 2.0;
+            const double center_y = size.y / 2.0;
+            const double draw_radius = radius;
+            dc.SetPen(*wxTRANSPARENT_PEN);
+            for (int x = 0; x < size.x; ++x) {
+                const double dx = x + 0.5 - center_x;
+                if (std::abs(dx) > draw_radius) continue;
+
+                const double half_height = std::sqrt(std::max(0.0, draw_radius * draw_radius - dx * dx));
+                const int top = std::max(0, static_cast<int>(std::ceil(center_y - half_height)));
+                const int bottom = std::min(size.y - 1, static_cast<int>(std::floor(center_y + half_height)));
+                const double pos = size.x > 1 ? static_cast<double>(x) / (size.x - 1) : 0.0;
+                const double scaled = pos * (m_cols.size() - 1);
+                const size_t idx = std::min(static_cast<size_t>(scaled), m_cols.size() - 2);
+                const double ratio = scaled - idx;
+
+                if (top <= bottom) {
+                    dc.SetBrush(wxBrush(mix_colour(m_cols[idx], m_cols[idx + 1], ratio)));
+                    dc.DrawRectangle(x, top, 1, bottom - top + 1);
+                }
+            }
+        }
+        else {
+            float ev_angle = 360.0 / m_cols.size();
+            const float overlap = 2.0f;
+            wxPoint center(size.x / 2, size.y / 2);
+            dc.SetPen(*wxTRANSPARENT_PEN);
+            dc.SetBrush(wxBrush(m_cols.front()));
+            dc.DrawCircle(center.x, center.y, radius);
+            for (int i = 0; i < m_cols.size(); i++) {
+                dc.SetBrush(m_cols[i]);
+                float startAngle = 270.0f + i * ev_angle;
+                float endAngle = startAngle + ev_angle;
+                dc.DrawEllipticArc(center.x - radius, center.y - radius, 2 * radius, 2 * radius, startAngle - overlap, endAngle + overlap);
+            }
+        }
+    }
+    else if (alpha == 0) {
         wxSize bmp_size = m_bitmap_transparent_def.GetBmpSize();
         int center_x = (size.x - bmp_size.x) / 2;
         int center_y = (size.y - bmp_size.y) / 2;
@@ -1777,52 +1942,6 @@ void ColorPicker::doRender(wxDC& dc)
         dc.SetPen(wxPen(wxColour("#6B6B6B")));
         dc.SetBrush(*wxTRANSPARENT_BRUSH);
         dc.DrawCircle(size.x / 2, size.y / 2, radius);
-
-        if (m_cols.size() > 1) {
-            if (ctype == 0) {
-                int left = FromDIP(0);
-                float total_width = size.x;
-                int gwidth = std::round(total_width / (m_cols.size() - 1));
-
-                for (int i = 0; i < m_cols.size() - 1; i++) {
-
-                    if ((left + gwidth) > (size.x)) {
-                        gwidth = size.x - left;
-                    }
-
-                    auto rect = wxRect(left, 0, gwidth, size.y);
-                    dc.GradientFillLinear(rect, m_cols[i], m_cols[i + 1], wxEAST);
-                    left += gwidth;
-                }
-                if (wxGetApp().dark_mode()) {
-                    dc.DrawBitmap(m_bitmap_border_dark, wxPoint(0, 0));
-                }
-                else {
-                    dc.DrawBitmap(m_bitmap_border, wxPoint(0, 0));
-                }
-            }
-            else {
-                float ev_angle = 360.0 / m_cols.size();
-                float startAngle = 270.0;
-                float endAngle = 270.0;
-                dc.SetPen(*wxTRANSPARENT_PEN);
-                for (int i = 0; i < m_cols.size(); i++) {
-                    dc.SetBrush(m_cols[i]);
-                    endAngle += ev_angle;
-                    endAngle = endAngle > 360.0 ? endAngle - 360.0 : endAngle;
-                    wxPoint center(size.x / 2, size.y / 2);
-                    dc.DrawEllipticArc(center.x - radius, center.y - radius, 2 * radius, 2 * radius, startAngle, endAngle);
-                    startAngle += ev_angle;
-                    startAngle = startAngle > 360.0 ? startAngle - 360.0 : startAngle;
-                }
-                if (wxGetApp().dark_mode()) {
-                    dc.DrawBitmap(m_bitmap_border_dark, wxPoint(0, 0));
-                }
-                else {
-                    dc.DrawBitmap(m_bitmap_border, wxPoint(0, 0));
-                }
-            }
-        }
     }
 
     if (m_is_empty) {
@@ -1891,19 +2010,21 @@ ColorPickerPopup::ColorPickerPopup(wxWindow* parent)
     m_ams_fg_sizer->SetNonFlexibleGrowMode(wxFLEX_GROWMODE_SPECIFIED);
 
     //other
-    wxFlexGridSizer* fg_sizer;
-    fg_sizer = new wxFlexGridSizer(0, 8, 0, 0);
-    fg_sizer->SetFlexibleDirection(wxBOTH);
-    fg_sizer->SetNonFlexibleGrowMode(wxFLEX_GROWMODE_SPECIFIED);
+    m_other_fg_sizer = new wxFlexGridSizer(0, 8, 0, 0);
+    m_other_fg_sizer->SetFlexibleDirection(wxBOTH);
+    m_other_fg_sizer->SetNonFlexibleGrowMode(wxFLEX_GROWMODE_SPECIFIED);
 
 
     for (wxColour col : m_def_colors) {
         auto cp = new ColorPicker(m_def_color_box, wxID_ANY, wxDefaultPosition, wxDefaultSize);
         cp->set_color(col);
+        cp->set_colors({col});
+        cp->ctype = 2;
         cp->set_selected(false);
         cp->SetBackgroundColour(StateColor::darkModeColorFor(wxColour(238,238,238)));
         m_color_pickers.push_back(cp);
-        fg_sizer->Add(cp, 0, wxALL, FromDIP(3));
+        m_default_color_pickers.push_back(cp);
+        m_other_fg_sizer->Add(cp, 0, wxALL, FromDIP(3));
         cp->Bind(wxEVT_LEFT_DOWN, [this, cp](auto& e) {
             set_def_colour(cp->m_colour);
 
@@ -1970,7 +2091,7 @@ ColorPickerPopup::ColorPickerPopup(wxWindow* parent)
     m_sizer_box->Add(m_sizer_ams, 1, wxEXPAND|wxLEFT|wxRIGHT, FromDIP(10));
     m_sizer_box->Add(m_ams_fg_sizer, 0, wxEXPAND|wxLEFT|wxRIGHT, FromDIP(10));
     m_sizer_box->Add(m_sizer_other, 1, wxEXPAND|wxLEFT|wxRIGHT, FromDIP(10));
-    m_sizer_box->Add(fg_sizer, 0, wxEXPAND|wxLEFT|wxRIGHT, FromDIP(10));
+    m_sizer_box->Add(m_other_fg_sizer, 0, wxEXPAND|wxLEFT|wxRIGHT, FromDIP(10));
     m_sizer_box->Add(m_sizer_custom, 0, wxEXPAND|wxLEFT|wxRIGHT, FromDIP(10));
     m_sizer_box->Add(m_custom_cp, 0, wxEXPAND|wxLEFT|wxRIGHT, FromDIP(16));
     m_sizer_box->Add(0, 0, 0, wxTOP, FromDIP(10));
@@ -1981,7 +2102,7 @@ ColorPickerPopup::ColorPickerPopup(wxWindow* parent)
     m_def_color_box->Fit();
 
     m_sizer_main->Add(m_def_color_box, 0, wxALL | wxEXPAND, 10);
-    SetSizer(m_sizer_main);
+    SetSizerAndFit(m_sizer_main);
     Layout();
     Fit();
 
@@ -2019,13 +2140,15 @@ void ColorPickerPopup::on_custom_clr_picker(wxMouseEvent& /*event*/)
     wxPostEvent(GetParent(), evt);
 }
 
-void ColorPickerPopup::set_ams_colours(std::vector<wxColour> ams)
+void ColorPickerPopup::set_ams_colours(const std::vector<ColorItem>& ams)
 {
+    m_ams_fg_sizer->Clear(false);
     if (m_ams_color_pickers.size() > 0) {
         for (ColorPicker* col_pick:m_ams_color_pickers) {
 
             std::vector<ColorPicker*>::iterator iter = find(m_color_pickers.begin(), m_color_pickers.end(), col_pick);
             if (iter != m_color_pickers.end()) {
+                col_pick->Hide();
                 col_pick->Destroy();
                 m_color_pickers.erase(iter);
             }
@@ -2035,17 +2158,22 @@ void ColorPickerPopup::set_ams_colours(std::vector<wxColour> ams)
     }
 
 
-    m_ams_colors = ams;
-    for (wxColour col : m_ams_colors) {
+    m_ams_color_items = ams;
+    for (const ColorItem& item : m_ams_color_items) {
+        if (item.colors.empty()) continue;
+
         auto cp = new ColorPicker(m_def_color_box, wxID_ANY, wxDefaultPosition, wxDefaultSize);
-        cp->set_color(col);
+        cp->set_color(item.colors.front());
+        cp->set_colors(item.colors);
+        cp->ctype = item.colors.size() > 1 ? item.ctype : 2;
+        cp->set_show_full(true);
         cp->set_selected(false);
         cp->SetBackgroundColour(StateColor::darkModeColorFor(wxColour(238,238,238)));
         m_color_pickers.push_back(cp);
         m_ams_color_pickers.push_back(cp);
         m_ams_fg_sizer->Add(cp, 0, wxALL, FromDIP(3));
         cp->Bind(wxEVT_LEFT_DOWN, [this, cp](auto& e) {
-            set_def_colour(cp->m_colour);
+            set_def_colour(cp->m_colour, cp->m_cols, cp->ctype);
 
             wxCommandEvent evt(EVT_SELECTED_COLOR);
             unsigned long g_col = ((cp->m_colour.Red() & 0xff) << 24) + ((cp->m_colour.Green() & 0xff) << 16) + ((cp->m_colour.Blue() & 0xff) << 8) + (cp->m_colour.Alpha() & 0xff);
@@ -2058,9 +2186,68 @@ void ColorPickerPopup::set_ams_colours(std::vector<wxColour> ams)
     Fit();
 }
 
-void ColorPickerPopup::set_def_colour(wxColour col)
+void ColorPickerPopup::set_preset_colours(const std::vector<ColorItem>& preset_colors)
+{
+    m_other_fg_sizer->Clear(false);
+    if (!m_preset_color_pickers.empty()) {
+        for (ColorPicker* col_pick : m_preset_color_pickers) {
+            auto iter = std::find(m_color_pickers.begin(), m_color_pickers.end(), col_pick);
+            if (iter != m_color_pickers.end()) {
+                col_pick->Hide();
+                col_pick->Destroy();
+                m_color_pickers.erase(iter);
+            }
+        }
+        m_preset_color_pickers.clear();
+    }
+
+    for (const ColorItem& item : preset_colors) {
+        if (item.colors.empty()) continue;
+
+        auto cp = new ColorPicker(m_def_color_box, wxID_ANY, wxDefaultPosition, wxDefaultSize);
+        cp->set_color(item.colors.front());
+        cp->set_colors(item.colors);
+        cp->ctype = item.colors.size() > 1 ? item.ctype : 2;
+        cp->set_show_full(true);
+        cp->set_selected(false);
+        cp->SetBackgroundColour(StateColor::darkModeColorFor(wxColour(238,238,238)));
+        if (!item.name.empty()) {
+            cp->SetToolTip(item.name);
+        }
+
+        m_color_pickers.push_back(cp);
+        m_preset_color_pickers.push_back(cp);
+        cp->Bind(wxEVT_LEFT_DOWN, [this, cp](auto& e) {
+            set_def_colour(cp->m_colour, cp->m_cols, cp->ctype);
+
+            wxCommandEvent evt(EVT_SELECTED_COLOR);
+            unsigned long g_col = ((cp->m_colour.Red() & 0xff) << 24) + ((cp->m_colour.Green() & 0xff) << 16) + ((cp->m_colour.Blue() & 0xff) << 8) + (cp->m_colour.Alpha() & 0xff);
+            evt.SetInt(g_col);
+            wxPostEvent(GetParent(), evt);
+        });
+    }
+
+    const bool show_default_colours = m_preset_color_pickers.empty();
+    for (ColorPicker* cp : m_default_color_pickers) {
+        cp->Show(show_default_colours);
+    }
+    for (ColorPicker* cp : (show_default_colours ? m_default_color_pickers : m_preset_color_pickers)) {
+        m_other_fg_sizer->Add(cp, 0, wxALL, FromDIP(3));
+    }
+
+    m_other_fg_sizer->Layout();
+    Layout();
+    Fit();
+}
+
+void ColorPickerPopup::set_def_colour(wxColour col, std::vector<wxColour> cols, int ctype)
 {
     m_def_col = col;
+    if (cols.empty()) {
+        cols.push_back(col);
+    }
+    m_def_cols = cols;
+    m_def_ctype = m_def_cols.size() > 1 ? ctype : 2;
 
     for (ColorPicker* cp : m_color_pickers) {
         if (cp->m_selected) {
@@ -2069,7 +2256,8 @@ void ColorPickerPopup::set_def_colour(wxColour col)
     }
 
     for (ColorPicker* cp : m_color_pickers) {
-        if (cp->m_colour == m_def_col) {
+        if (!cp->IsShown()) continue;
+        if (cp->ctype == m_def_ctype && cp->m_cols == m_def_cols) {
             cp->set_selected(true);
             break;
         }

src/slic3r/GUI/AMSMaterialsSetting.hpp

@@ -82,14 +82,22 @@ public:
 class ColorPickerPopup : public PopupWindow
 {
 public:
+    struct ColorItem
+    {
+        std::vector<wxColour> colors;
+        int                   ctype = 2;
+        wxString              name;
+    };
+
     ScalableBitmap m_ts_bitmap_custom;
     wxStaticBitmap* m_ts_stbitmap_custom;
     StaticBox* m_custom_cp;
     StaticBox* m_def_color_box;
     wxFlexGridSizer* m_ams_fg_sizer;
+    wxFlexGridSizer* m_other_fg_sizer;
     wxColour m_def_col;
     std::vector<wxColour> m_def_colors;
-    std::vector<wxColour> m_ams_colors;
+    std::vector<ColorItem> m_ams_color_items;
     std::vector<ColorPicker*> m_color_pickers;
     std::vector<ColorPicker*> m_ams_color_pickers;
 
@@ -97,13 +105,20 @@ public:
     ColorPickerPopup(wxWindow* parent);
     ~ColorPickerPopup() {};
     void on_custom_clr_picker(wxMouseEvent& event);
-    void set_ams_colours(std::vector<wxColour> ams);
-    void set_def_colour(wxColour col);
+    void set_ams_colours(const std::vector<ColorItem>& ams);
+    void set_preset_colours(const std::vector<ColorItem>& preset_colors);
+    void set_def_colour(wxColour col, std::vector<wxColour> cols = {}, int ctype = 2);
+    const std::vector<wxColour>& get_selected_colours() const { return m_def_cols; }
+    int get_selected_ctype() const { return m_def_ctype; }
     void paintEvent(wxPaintEvent& evt);
     virtual void OnDismiss() wxOVERRIDE;
     virtual bool ProcessLeftDown(wxMouseEvent& event) wxOVERRIDE;
 
-public:
+private:
+    std::vector<ColorPicker*> m_default_color_pickers;
+    std::vector<ColorPicker*> m_preset_color_pickers;
+    std::vector<wxColour> m_def_cols;
+    int m_def_ctype = 2;
 };
 
 

src/slic3r/GUI/BackgroundSlicingProcess.cpp

@@ -747,7 +747,9 @@ Print::ApplyStatus BackgroundSlicingProcess::apply(const Model& model, const Dyn
 
     // Orca: prevent resetting under gcode viewer mode
     if (invalidated != PrintBase::APPLY_STATUS_UNCHANGED) {
-        const auto plater = GUI::wxGetApp().mainframe->m_plater;
+        // Use the app’s plater accessor instead of going through mainframe, otherwise anything during startup that reaches apply() 
+        // (loading presets, config or input files, e.g. from the CLI) therefore dereferences a null `mainframe` and crashes.
+        const auto plater = GUI::wxGetApp().plater();
         if (plater && plater->only_gcode_mode()) {
             invalidated = PrintBase::APPLY_STATUS_UNCHANGED;
         }

src/slic3r/GUI/CreatePresetsDialog.cpp

@@ -3151,7 +3151,7 @@ void CreatePrinterPresetDialog::set_current_visible_printer()
     m_printer_name_to_preset.clear();
     for (const Preset &printer_preset : printer_presets) {
         if (!printer_preset.is_visible) continue;
-        if (preset_bundle->printers.get_preset_base(printer_preset)->name != printer_preset.name) continue;
+        if (preset_bundle->printers.get_preset_base(printer_preset) != &printer_preset) continue;
         if (auto printer_model = dynamic_cast<ConfigOptionString*>(const_cast<Preset&>(printer_preset).config.option("printer_model", false))) {
             if (m_printer_name_to_preset.find(printer_model->value) == m_printer_name_to_preset.end()) {
                 printer_choice.push_back(from_u8(printer_model->value));
@@ -4962,7 +4962,7 @@ void CreatePresetForPrinterDialog::get_visible_printer_and_compatible_filament_p
                     if (filament_preset.is_default || !filament_preset.is_compatible || filament_preset.is_project_embedded) continue;
                     ConfigOptionStrings *filament_types;
                     const Preset *       filament_preset_base = m_preset_bundle->filaments.get_preset_base(filament_preset);
-                    if (filament_preset_base == &filament_preset) {
+                    if (filament_preset_base == &filament_preset || filament_preset_base == nullptr) {
                         filament_types = dynamic_cast<ConfigOptionStrings *>(const_cast<Preset *>(&filament_preset)->config.option("filament_type"));
                     } else {
                         filament_types = dynamic_cast<ConfigOptionStrings *>(const_cast<Preset *>(filament_preset_base)->config.option("filament_type"));

src/slic3r/GUI/DeviceManager.cpp

@@ -1798,7 +1798,8 @@ int MachineObject::command_ams_calibrate(int ams_id)
     return command_with_dialog(m_agent->command_ams_calibrate(get_dev_id(), ams_id, MachineObject::m_sequence_id++, is_lan_mode_printer()));
 }
 
-int MachineObject::command_ams_filament_settings(int ams_id, int slot_id, std::string filament_id, std::string setting_id, std::string tray_color, std::string tray_type, int nozzle_temp_min, int nozzle_temp_max)
+int MachineObject::command_ams_filament_settings(int ams_id, int slot_id, std::string filament_id, std::string setting_id, std::string tray_color, std::string tray_type,
+                                                 int nozzle_temp_min, int nozzle_temp_max, const std::vector<std::string>& tray_colors, int tray_ctype)
 {
     int tag_tray_id = 0;
     int tag_ams_id  = ams_id;
@@ -1827,6 +1828,10 @@ int MachineObject::command_ams_filament_settings(int ams_id, int slot_id, std::s
     j["print"]["nozzle_temp_min"]   = nozzle_temp_min;
     j["print"]["nozzle_temp_max"]   = nozzle_temp_max;
     j["print"]["tray_type"]         = tray_type;
+    if (!tray_colors.empty()) {
+        j["print"]["cols"]  = tray_colors;
+        j["print"]["ctype"] = tray_ctype;
+    }
 
     return this->publish_json(j);
 }
@@ -5478,6 +5483,7 @@ void MachineObject::parse_new_info(json print)
         is_support_pa_mode = (get_flag_bits_no_border(fun2, 3) == 1);
         is_support_remote_dry = (get_flag_bits_no_border(fun2, 5) == 1);
         is_support_check_track_switch_match_slice_printer = get_flag_bits_no_border(fun2, 19) == 1;
+        is_support_filament_manual_multi_color = (get_flag_bits_no_border(fun2, 23) == 1);
 
         if (DevPrinterConfigUtil::support_print_check_firmware_for_tpu_left(printer_type)) {
             m_firmware_support_print_tpu_left = get_flag_bits_no_border(fun2, 7) == 1;

src/slic3r/GUI/DeviceManager.hpp

@@ -674,6 +674,7 @@ public:
     bool is_support_remote_dry = false;
     bool is_support_check_track_switch_match_slice_printer{false};
     bool is_support_pa_mode{false};
+    bool is_support_filament_manual_multi_color{false};
     std::optional<bool> m_firmware_support_print_tpu_left;
 
     bool installed_upgrade_kit{false};
@@ -804,7 +805,7 @@ public:
     int command_ams_switch_filament(bool switch_filament);
     int command_ams_air_print_detect(bool air_print_detect);
     int command_ams_calibrate(int ams_id);
-    int command_ams_filament_settings(int ams_id, int slot_id, std::string filament_id, std::string setting_id, std::string tray_color, std::string tray_type, int nozzle_temp_min, int nozzle_temp_max);
+    int command_ams_filament_settings(int ams_id, int slot_id, std::string filament_id, std::string setting_id, std::string tray_color, std::string tray_type, int nozzle_temp_min, int nozzle_temp_max, const std::vector<std::string>& tray_colors = {}, int tray_ctype = 2);
     int command_ams_select_tray(std::string tray_id);
     int command_ams_refresh_rfid(int ams_id, int slot_id);
     int command_ams_control(std::string action);

src/slic3r/GUI/EncodedFilament.cpp

@@ -96,7 +96,7 @@ void FilamentColorCodeQuery::LoadFromLocal()
                     const auto& fila_color_strs = json_data_item["fila_color"].get<std::vector<wxString>>();
                     for (const auto& color_str : fila_color_strs) {
                         if (color_str.size() > 3) /* Skip the value like "#0"*/{
-                            fila_color.m_colors.emplace(wxColour(color_str));
+                            fila_color.AddColor(wxColour(color_str));
                         }
                     }
                 }

src/slic3r/GUI/EncodedFilament.hpp

@@ -87,6 +87,17 @@ struct FilamentColor
 
 public:
     size_t ColorCount() const noexcept { return m_colors.size(); }
+    // Preserve catalog endpoint order for display while retaining set-based lookup identity.
+    const std::vector<wxColour>& GetColors() const noexcept { return m_color_list; }
+    void AddColor(const wxColour& color)
+    {
+        if (m_colors.insert(color).second) m_color_list.push_back(color);
+    }
+
+private:
+    std::vector<wxColour> m_color_list;
+
+public:
 
     void EndSet(int ctype)
     {

src/slic3r/GUI/GLCanvas3D.cpp

@@ -65,6 +65,7 @@
 #include <string_view>
 #include "slic3r/GUI/Selection.hpp"
 #include "GLCanvas3D.hpp"
+#include "SequentialPrintClearance.hpp"
 #ifdef SLIC3R_CAD
 #include "slic3r/GUI/CAD/DesignSketchTool.hpp"   // Design tab: interactive 2D sketch tool
 #endif
@@ -6397,17 +6398,16 @@ void GLCanvas3D::update_sequential_clearance()
     //BBS: add the height logic
     PartPlate* plate = wxGetApp().plater()->get_partplate_list().get_curr_plate();
     Polygons polygons;
-    std::vector<std::pair<Polygon, float>> height_polygons;
     polygons.reserve(instances_count);
-    height_polygons.reserve(instances_count);
-    std::vector<struct height_info> convex_and_bounding_boxes;
-    struct height_info
-    {
-        double         instance_height;
-        BoundingBox    bounding_box;
-        Polygon        hull_polygon;
-    };
+    std::vector<SequentialClearanceInstance> convex_and_bounding_boxes;
+    convex_and_bounding_boxes.reserve(instances_count);
+    std::map<ObjectID, int> print_order;
+    for (const PrintObject* print_object : fff_print()->objects())
+        for (const PrintInstance& instance : print_object->instances())
+            print_order.emplace(instance.model_instance->id(), instance.model_instance->arrange_order);
+
     for (size_t i = 0; i < instance_transforms.size(); ++i) {
+        const size_t first_instance = convex_and_bounding_boxes.size();
         const auto& instances = instance_transforms[i];
         double rotation_z0 = instances.front()->get_rotation().z();
         int index = 0;
@@ -6427,96 +6427,20 @@ void GLCanvas3D::update_sequential_clearance()
             Polygon convex_hull(std::move(inst_pts));
             BoundingBox bouding_box = convex_hull.bounding_box();
             BoundingBox plate_bb = plate->get_bounding_box_crd();
+            const ObjectID instance_id = m_model->objects[i]->instances[index]->id();
             double instance_height = m_model->objects[i]->get_instance_max_z(index++);
             //skip the object for not current plate
             if (!plate_bb.overlap(bouding_box))
                 continue;
-            convex_and_bounding_boxes.push_back({instance_height, bouding_box, convex_hull});
+            convex_and_bounding_boxes.push_back({instance_height, bouding_box, convex_hull, instance_id});
             polygons.emplace_back(std::move(convex_hull));
         }
+        sort_sequential_clearance_instances(convex_and_bounding_boxes.begin() + first_instance, convex_and_bounding_boxes.end(), print_order);
     }
 
-    //sort the print instance
-    std::sort(convex_and_bounding_boxes.begin(), convex_and_bounding_boxes.end(),
-        [](auto &l, auto &r) {
-            auto ly1 = l.bounding_box.min.y();
-            auto ly2 = l.bounding_box.max.y();
-            auto ry1 = r.bounding_box.min.y();
-            auto ry2 = r.bounding_box.max.y();
-            auto inter_min = std::max(ly1, ry1);
-            auto inter_max = std::min(ly2, ry2);
-            auto lx = l.bounding_box.min.x();
-            auto rx = r.bounding_box.min.x();
-            if (inter_max - inter_min > 0)
-                return (lx < rx) || ((lx == rx)&&(ly1 < ry1));
-            else
-                return (ly1 < ry1);
-        });
-
-    /*bool has_interlaced_objects = false;
-    for (int k = 0; k < bounding_box_count; k++)
-    {
-        Polygon& convex = convex_and_bounding_boxes[k].hull_polygon;
-        BoundingBox& bbox = convex_and_bounding_boxes[k].bounding_box;
-        auto iy1 = bbox.min.y();
-        auto iy2 = bbox.max.y();
-
-        for (int i = k+1; i < bounding_box_count; i++)
-        {
-            Polygon&     next_convex = convex_and_bounding_boxes[i].hull_polygon;
-            BoundingBox& next_bbox   = convex_and_bounding_boxes[i].bounding_box;
-            auto py1 = next_bbox.min.y();
-            auto py2 = next_bbox.max.y();
-            auto inter_min = std::max(iy1, py1); // min y of intersection
-            auto inter_max = std::min(iy2, py2); // max y of intersection. length=max_y-min_y>0 means intersection exists
-            if (inter_max - inter_min > 0) {
-                has_interlaced_objects = true;
-                break;
-            }
-        }
-        if (has_interlaced_objects)
-            break;
-    }*/
-
-    int bounding_box_count = convex_and_bounding_boxes.size();
-    double printable_height = fff_print()->config().printable_height;
-    double hc1 = fff_print()->config().extruder_clearance_height_to_lid;
-    double hc2 = fff_print()->config().extruder_clearance_height_to_rod;
-    for (int k = 0; k < bounding_box_count; k++)
-    {
-        Polygon& convex = convex_and_bounding_boxes[k].hull_polygon;
-        BoundingBox& bbox = convex_and_bounding_boxes[k].bounding_box;
-        auto iy1 = bbox.min.y();
-        auto iy2 = bbox.max.y();
-        double height = (k == (bounding_box_count - 1))?printable_height:hc1;
-
-        /*if (has_interlaced_objects) {
-            if ((k < (bounding_box_count - 1)) && (convex_and_bounding_boxes[k].instance_height > hc2)) {
-                height_polygons.emplace_back(std::make_pair(convex, hc2));
-            }
-        }
-        else {
-            if ((k < (bounding_box_count - 1)) && (convex_and_bounding_boxes[k].instance_height > hc1)) {
-                height_polygons.emplace_back(std::make_pair(convex, hc1));
-            }
-        }*/
-
-        for (int i = k+1; i < bounding_box_count; i++)
-        {
-            Polygon&     next_convex = convex_and_bounding_boxes[i].hull_polygon;
-            BoundingBox& next_bbox   = convex_and_bounding_boxes[i].bounding_box;
-            auto py1 = next_bbox.min.y();
-            auto py2 = next_bbox.max.y();
-            auto inter_min = std::max(iy1, py1); // min y of intersection
-            auto inter_max = std::min(iy2, py2); // max y of intersection. length=max_y-min_y>0 means intersection exists
-            if (inter_max - inter_min > 0) {
-                height = hc2;
-                break;
-            }
-        }
-        if (height < convex_and_bounding_boxes[k].instance_height)
-            height_polygons.emplace_back(std::make_pair(convex, height));
-    }
+    const auto& config = fff_print()->config();
+    const auto height_polygons = sequential_clearance_height_polygons(convex_and_bounding_boxes, config.printable_height,
+        config.extruder_clearance_height_to_lid, config.extruder_clearance_height_to_rod);
 
     // sends instances 2d hulls to be rendered
     set_sequential_print_clearance_visible(true);

src/slic3r/GUI/GUI_App.cpp

@@ -252,9 +252,11 @@
 #include "slic3r/GUI/ParamsDialog.hpp"
 #include "slic3r/GUI/ParamsPanel.hpp"
 #include "slic3r/GUI/PartPlate.hpp"
+#include "slic3r/GUI/TextureLibrary.hpp"
 #include "slic3r/GUI/Widgets/Button.hpp"
 #include "slic3r/GUI/wxExtensions.hpp"
 #include "slic3r/plugin/host/PluginPages.hpp"
+#include "slic3r/plugin/host/PluginResourceTextures.hpp"
 #include <wx/defs.h>
 #include "slic3r/GUI/Widgets/WebView.hpp"
 #include <cwchar>
@@ -333,6 +335,23 @@ static std::shared_ptr<OrcaCloudServiceAgent> get_orca_cloud_agent(NetworkAgent*
     return agent ? std::dynamic_pointer_cast<OrcaCloudServiceAgent>(agent->get_cloud_agent()) : nullptr;
 }
 
+// Full {web} page URL for a same-site OrcaCloud path, or empty when it cannot be built. An already
+// open cloud pane is navigated straight to it, without re-running the session handoff.
+static wxString cloud_page_url(NetworkAgent* agent, const std::string& path)
+{
+    if (path.empty())
+        return {};
+    auto orca = get_orca_cloud_agent(agent);
+    if (!orca)
+        return {};
+    std::string base = orca->get_cloud_base_url();
+    while (!base.empty() && base.back() == '/')
+        base.pop_back();
+    if (base.empty())
+        return {};
+    return from_u8(base + path);
+}
+
 void start_ping_test()
 {
     return;
@@ -3063,6 +3082,37 @@ void GUI_App::init_plugin_gui_wiring()
             refresh_plugins_dialog();
             switch_printer_agent_after_unload(capability.plugin_key);
         });
+    plugin_mgr.subscribe_on_load_callback([](const std::string& plugin_key) {
+        if (wxTheApp == nullptr || wxGetApp().is_closing())
+            return;
+        PluginResourceTextures::instance().on_plugin_register(plugin_key);
+        Slic3r::GUI::bump_texture_library_generation();
+    });
+    plugin_mgr.subscribe_on_unload_callback([](const std::string& plugin_key) {
+        if (wxTheApp == nullptr || wxGetApp().is_closing())
+            return;
+        PluginResourceTextures::instance().on_plugin_deregister(plugin_key);
+        Slic3r::GUI::bump_texture_library_generation();
+    });
+    plugin_mgr.subscribe_on_capability_load_callback([](const PluginCapabilityId& capability) {
+        if (capability.type != PluginCapabilityType::ResourceTexture)
+            return;
+        if (wxTheApp == nullptr || wxGetApp().is_closing())
+            return;
+        PluginResourceTextures::instance().on_cap_register(capability);
+        Slic3r::GUI::bump_texture_library_generation();
+    });
+    plugin_mgr.subscribe_on_capability_unload_callback([](const PluginCapabilityId& capability) {
+        if (capability.type != PluginCapabilityType::ResourceTexture)
+            return;
+        if (wxTheApp == nullptr || wxGetApp().is_closing())
+            return;
+        PluginResourceTextures::instance().on_cap_deregister(capability);
+        Slic3r::GUI::bump_texture_library_generation();
+    });
+    // Packs already loaded before this wiring, or in tests where no callback fires.
+    PluginResourceTextures::instance().initial_sweep();
+    Slic3r::GUI::bump_texture_library_generation();
 }
 
 bool GUI_App::on_init_inner()
@@ -5434,12 +5484,7 @@ std::string GUI_App::handle_web_request(std::string cmd)
                 this->request_open_project({});
             }
             else if (command_str.compare("homepage_open_cloud") == 0) {
-                // Deferred: set_cloud_mode() may create a second native webview, which must
-                // not run inside this webview's script-message callback.
-                CallAfter([this]() {
-                    if (WebViewPanel* home = WebViewPanel::if_built())
-                        home->set_cloud_mode(true, cloud_webview_handoff());
-                });
+                this->open_orca_cloud();
             }
             else if (command_str.compare("homepage_close_cloud") == 0) {
                 CallAfter([]() {
@@ -5588,6 +5633,22 @@ std::string GUI_App::handle_web_request(std::string cmd)
     return "";
 }
 
+void GUI_App::open_orca_cloud(const std::string& next)
+{
+    // Remembered so a login while the pane is open re-seeds the same page rather than the default.
+    m_cloud_open_path = next;
+    // Deferred: set_cloud_mode() may create the second native webview, so this must not run inside
+    // the caller's frame (a webview script-message callback or an ImGui frame).
+    CallAfter([this]() {
+        if (mainframe != nullptr)
+            mainframe->select_tab(TAB_ID_HOME);
+        // The Home page is built lazily, so the tab switch may not have created it yet: ensure() builds
+        // it if needed, matching what showing the tab does, rather than dropping the open request.
+        if (WebViewPanel* home = WebViewPanel::ensure())
+            home->set_cloud_mode(true, cloud_webview_handoff(m_cloud_open_path), cloud_page_url(m_agent, m_cloud_open_path));
+    });
+}
+
 void GUI_App::handle_script_message(std::string msg, const std::string& provider)
 {
     try {
@@ -5865,7 +5926,7 @@ void GUI_App::on_update_machine_list(wxCommandEvent &evt)
      }*/
 }
 
-wxString GUI_App::cloud_webview_handoff()
+wxString GUI_App::cloud_webview_handoff(const std::string& next)
 {
     // The cloud pane loads the Start URL, not a token: the page checks the webview's own session
     // and asks for a handoff itself (guide §4). Signed out, user_id is omitted and the page will
@@ -5873,7 +5934,7 @@ wxString GUI_App::cloud_webview_handoff()
     auto orca = get_orca_cloud_agent(m_agent);
     if (!orca)
         return {};
-    return from_u8(orca->build_web_session_start_url());
+    return from_u8(orca->build_web_session_start_url(next));
 }
 
 void GUI_App::request_cloud_web_session(const std::string& state)
@@ -6016,7 +6077,7 @@ void GUI_App::on_user_login_handle(wxCommandEvent &evt)
     m_cloud_handoff_state.clear();
     if (WebViewPanel* home = WebViewPanel::if_built())
         if (home->cloud_mode_active())
-            home->set_cloud_mode(true, cloud_webview_handoff());
+            home->set_cloud_mode(true, cloud_webview_handoff(m_cloud_open_path));
 }
 
 
@@ -6863,7 +6924,7 @@ void  GUI_App::push_notification(const MachineObject* obj, wxString msg, wxStrin
     }
 }
 
-void GUI_App::reload_settings()
+bool GUI_App::reload_settings()
 {
     if (preset_bundle && m_agent) {
         // Load user's personal presets
@@ -6871,7 +6932,7 @@ void GUI_App::reload_settings()
         int result = m_agent->get_user_presets(&user_presets);
         if (result != 0) {
             BOOST_LOG_TRIVIAL(error) << __FUNCTION__ << ": get_user_presets failed with code " << result << ", skipping sync";
-            return;
+            return false;
         }
         BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << __LINE__ << " cloud user preset number is: " << user_presets.size();
         auto refresh_synced_ui = [this, user_presets = std::move(user_presets)]() mutable {
@@ -6946,13 +7007,30 @@ void GUI_App::reload_settings()
             refresh_synced_ui();
         else
             CallAfter(refresh_synced_ui);
+        return true;
     }
+    return false;
 }
 
 void GUI_App::check_legacy_user_filament_presets(bool by_user)
 {
+    // One check at a time: the startup check can come due while the manual one is open, and on macOS the menu bar
+    // stays usable while a modal dialog is up.
+    if (m_legacy_filament_check_running)
+        return;
     if (!by_user && app_config->get_bool("legacy_user_filament_presets_dont_remind"))
         return;
+    // The local copies may be older than the cloud ones another machine changed: migrating them would push changes
+    // made against stale copies and conflict with the cloud. The startup check waits for the presets to be pulled.
+    if (!by_user && m_user_preset_pull_pending) {
+        m_legacy_filament_check_due = true;
+        return;
+    }
+    // This check also answers a startup check that is still waiting.
+    m_legacy_filament_check_due = false;
+    m_legacy_filament_check_running = true;
+    ScopeGuard running_guard([this] { m_legacy_filament_check_running = false; });
+
     const std::vector<LegacyUserFilamentPreset> legacy_presets = preset_bundle->legacy_user_filament_presets();
     if (legacy_presets.empty()) {
         if (by_user)
@@ -6997,6 +7075,9 @@ void GUI_App::check_legacy_user_filament_presets(bool by_user)
         show_error(mainframe, format_wxstr(_L("Your filament presets could not be migrated. A backup of your presets was saved to:\n%1%"), backup));
         return;
     }
+    // Ask the sync loop to push on its next pass instead of its next 60 s round, which shortens the time the migrated
+    // presets stay unpushed.
+    m_sync_user_presets_now.store(true, std::memory_order_release);
     preset_bundle->update_compatible(PresetSelectCompatibleType::Never);
     mainframe->update_side_preset_ui();
     for (auto tab : tabs_list) {
@@ -7763,6 +7844,7 @@ void GUI_App::start_sync_user_preset(bool with_progress_dlg)
     BOOST_LOG_TRIVIAL(info) << "start_sync_service...";
     // BBS
     m_user_sync_token.reset(new int(0));
+    m_user_preset_pull_pending = true;
     if (with_progress_dlg) {
         // Mark a manual progress dialog as active so restart_sync_user_preset() ignores
         // repeat triggers while it is on screen (prevents stacking modal dialogs).
@@ -7836,8 +7918,16 @@ void GUI_App::start_sync_user_preset(bool with_progress_dlg)
 
             finishFn(ret == 0);
 
-            if (ret == 0 && m_agent && !t.expired())
-                reload_settings();
+            // Queued after the refresh reload_settings() queues, so it runs once the pulled presets are loaded.
+            if (ret == 0 && m_agent && !t.expired() && reload_settings())
+                CallAfter([this, t] {
+                    // A stopped or restarted sync: the next sync, if one starts, pulls the presets again.
+                    if (t.expired() || is_closing())
+                        return;
+                    m_user_preset_pull_pending = false;
+                    if (m_legacy_filament_check_due)
+                        check_legacy_user_filament_presets(false);
+                });
 
             // For orca specific syncing
             auto orca_agent = std::dynamic_pointer_cast<OrcaCloudServiceAgent>(m_agent->get_cloud_agent());
@@ -7852,8 +7942,11 @@ void GUI_App::start_sync_user_preset(bool with_progress_dlg)
             // Sync once immediately, then every 60 seconds.
             while (!t.expired()) {
                 ++tick_tock;
-                // Sync once immediately, then every 60s, or right away when a force-push asked for it.
-                if (tick_tock % 120 == 0 || m_sync_user_presets_now.exchange(false, std::memory_order_acq_rel)) {
+                // Sync once immediately, then every 60s, or right away when a force-push or a preset migration asked
+                // for it. The request is consumed on every tick, so one made before a scheduled pass is served by it
+                // instead of running a second pass straight after.
+                const bool push_now = m_sync_user_presets_now.exchange(false, std::memory_order_acq_rel);
+                if (tick_tock % 120 == 0 || push_now) {
                     tick_tock = 0;
                     if (m_agent) {
                         if (!m_agent->is_user_login()) {

src/slic3r/GUI/GUI_App.hpp

@@ -355,6 +355,9 @@ private:
     std::atomic<bool>    m_restart_sync_pending {false};
     std::atomic<bool>    m_sync_user_preset_dlg_active {false}; // a manual "Sync Presets" progress dialog is on screen (see restart_sync_user_preset)
     std::atomic<bool>    m_sync_user_presets_now {false}; // request the sync loop to push user presets on its next tick
+    bool                 m_user_preset_pull_pending {false}; // set when a sync thread starts, cleared once its pull is applied; a failed pull or a stopped sync leaves it set
+    bool                 m_legacy_filament_check_due {false}; // the startup check waits for that pull
+    bool                 m_legacy_filament_check_running {false}; // a check is in progress, its dialog may be open
     std::atomic<bool>    m_migration_retry_pending {false};
     bool             m_is_dark_mode{ false };
     bool             m_adding_script_handler { false };
@@ -365,6 +368,8 @@ private:
     // and a generation counter so a superseded mint/login result is dropped (guide §5, "only the
     // newest request counts").
     std::string      m_cloud_handoff_state;
+    // The OrcaCloud path the open requests target, remembered so a login re-seed keeps the same page.
+    std::string      m_cloud_open_path;
     uint64_t         m_cloud_handoff_gen { 0 };
     bool             m_show_error_msgdlg{false};
     wxString         m_info_dialog_content;
@@ -466,6 +471,9 @@ public:
 #if wxUSE_WEBVIEW_EDGE
     void            init_webview_runtime();
 #endif
+    // Switches to the Home tab and opens the OrcaCloud pane beside the homepage on `next`, a
+    // same-site OrcaCloud path (empty = the page's default). Work is deferred internally.
+    void            open_orca_cloud(const std::string& next = std::string());
     static unsigned get_colour_approx_luma(const wxColour& colour);
     static bool     dark_mode();
     const wxColour  get_label_default_clr_system();
@@ -572,7 +580,7 @@ public:
     // called from the pane when the page asks for a session; it opens the desktop login dialog if
     // signed out, otherwise mints a one-time token on a worker thread and loads the Complete URL
     // in the same webview.
-    wxString        cloud_webview_handoff();
+    wxString        cloud_webview_handoff(const std::string& next = std::string());
     void            request_cloud_web_session(const std::string& state);
     void            mint_cloud_web_session(const std::string& state, uint64_t gen);
     void            on_cloud_web_session_minted(const std::string& state, uint64_t gen, const std::string& token_hash);
@@ -589,7 +597,8 @@ public:
     void            check_new_version_sf(bool show_tips = false, int by_user = 0);
     // Offers to migrate user filament presets made against an older release that lost printers their parent
     // listed then. At startup it asks on every start that finds such presets, unless the user chose not to be
-    // reminded; by_user also reports when there is nothing to migrate.
+    // reminded; while the user presets sync with the cloud, it waits until they have been pulled. by_user also
+    // reports when there is nothing to migrate.
     void            check_legacy_user_filament_presets(bool by_user);
     bool            process_network_msg(std::string dev_id, std::string msg);
     void            request_new_version(int by_user);
@@ -600,7 +609,8 @@ public:
     std::string     format_IP(const std::string& ip);
     void            show_dialog(wxString msg);
     void            push_notification(const MachineObject* obj, wxString msg, wxString title = wxEmptyString, UserNotificationStyle style = UserNotificationStyle::UNS_NORMAL);
-    void            reload_settings();
+    // Returns false when the cloud presets could not be fetched, so nothing was reloaded.
+    bool            reload_settings();
     void            remove_user_presets();
 
     bool            maybe_migrate_user_presets_on_login();

src/slic3r/GUI/Gizmos/GLGizmoTextureDisplacement.cpp

@@ -40,6 +40,7 @@
 #include "slic3r/Utils/UndoRedo.hpp"
 #include "GLGizmoUtils.hpp"
 
+#include <cctype>
 #include <cstddef>
 #include <cstdint>
 #include <functional>
@@ -72,6 +73,7 @@
 #include <array>
 #include <cmath>
 #include <limits>
+#include <map>
 #include <numeric>
 #include <queue>
 #include <set>
@@ -97,6 +99,48 @@ namespace {
 // bigger jump than the whole useful region.
 constexpr float ImGuiLogSlider = float(ImGuiSliderFlags_Logarithmic);
 
+// The scrollbar of the panel's scrolling areas (the panel body and the texture library). ImGui's stock
+// scrollbar is a wide, square-cornered slab in a tinted track - against the flat panel it reads as a raw
+// widget bolted onto the edge - so it is slimmed to a rounded thumb over an invisible track. The child
+// background goes transparent with it, so the area reads as part of the panel.
+void push_slim_scrollbar_style(float width, bool dark)
+{
+    const ImVec4 grab = dark ? ImVec4(1.f, 1.f, 1.f, 0.26f) : ImVec4(0.f, 0.f, 0.f, 0.26f);
+    ImGui::PushStyleVar(ImGuiStyleVar_ScrollbarSize, width);
+    ImGui::PushStyleVar(ImGuiStyleVar_ScrollbarRounding, 0.5f * width);
+    ImGui::PushStyleColor(ImGuiCol_ScrollbarBg, ImVec4(0.f, 0.f, 0.f, 0.f));
+    ImGui::PushStyleColor(ImGuiCol_ScrollbarGrab, grab);
+    ImGui::PushStyleColor(ImGuiCol_ScrollbarGrabHovered, ImVec4(grab.x, grab.y, grab.z, 0.45f));
+    ImGui::PushStyleColor(ImGuiCol_ScrollbarGrabActive, ImVec4(grab.x, grab.y, grab.z, 0.65f));
+    ImGui::PushStyleColor(ImGuiCol_ChildBg, ImVec4(0.f, 0.f, 0.f, 0.f));
+}
+
+void pop_slim_scrollbar_style()
+{
+    ImGui::PopStyleColor(5);
+    ImGui::PopStyleVar(2);
+}
+
+// Cuts a UTF-8 string down to `max_w` pixels, ending it in "..." when it had to be cut.
+std::string ellipsize(std::string s, float max_w, float font_size = 0.f)
+{
+    const auto text_width = [&](const std::string &text) {
+        return font_size > 0.f
+                   ? ImGui::GetFont()->CalcTextSizeA(font_size, std::numeric_limits<float>::max(), 0.f, text.c_str()).x
+                   : ImGui::CalcTextSize(text.c_str()).x;
+    };
+    if (text_width(s) <= max_w)
+        return s;
+    while (!s.empty() && text_width(s + "...") > max_w) {
+        unsigned char c;
+        do { // a whole code point at a time
+            c = static_cast<unsigned char>(s.back());
+            s.pop_back();
+        } while (!s.empty() && (c & 0xC0) == 0x80);
+    }
+    return s + "...";
+}
+
 // Uploads decoded 8-bit grayscale height data as an RGBA GPU texture for display in the panel.
 // Shared by the per-layer thumbnail and the picker's library entries, which differ only in where
 // their pixels came from.
@@ -130,6 +174,10 @@ constexpr int HEIGHT_TEX_MAX_PX = 2048;
 // The full-size image is only ever adjusted once, on commit.
 constexpr int ADJUST_PREVIEW_MAX_PX = 384;
 
+// Library textures the texture picker decodes per frame. Each decode runs on the GUI thread, so the
+// rest of the visible tiles fill in over the following frames instead of in one stall.
+constexpr int PICKER_LOADS_PER_FRAME = 2;
+
 // How many rings of vertex-adjacent triangles either side of the paint's edge join the border refine
 // band (see collect_paint_region()). Two is enough to grade the size change without the band's own
 // cost growing to matter: it is a ring around a perimeter, not an area.
@@ -2919,8 +2967,9 @@ void GLGizmoTextureDisplacement::run_uv_command(int cmd, float value)
     }
     else if (cmd == int(Command::PickTexture)) {
         // The same texture library the layer card opens; the panel renders it this frame.
-        m_picker_slot         = m_active_layer_slot;
-        m_picker_open_request = true;
+        m_picker_slot            = m_active_layer_slot;
+        m_picker_open_request    = true;
+        m_picker_reveal_selected = true;
     } else if (cmd == int(Command::Unwrap)) {
         // The solve runs only on this - painting, the seam angle and seam marking never trigger it.
         m_uv_unwrap_pending      = true;
@@ -4073,7 +4122,7 @@ const GLGizmoTextureDisplacement::LibraryTexture *GLGizmoTextureDisplacement::ge
     if (entry.image_data) {
         TextureDisplacementLayer probe;
         probe.image_data = entry.image_data;
-        entry.thumbnail  = upload_height_thumbnail(decode_height_texture(probe));
+        entry.thumbnail  = upload_height_thumbnail(decode_height_texture(probe, /* keep_decoded */ false));
         if (!entry.thumbnail)
             entry.image_data.reset(); // decoded to nothing usable - treat it as a failed load
     } else {
@@ -4102,7 +4151,7 @@ void GLGizmoTextureDisplacement::set_layer_texture(TextureDisplacementLayer &lay
     // the PNG the first time the layer is previewed or baked.
     layer.image_data = tex->image_data;
     // The user's own textures are listed most recently used first.
-    if (entry.is_user)
+    if (entry.source == TextureSource::User)
         touch_user_texture(entry.path);
 
     rebuild_preview();
@@ -4129,6 +4178,40 @@ void GLGizmoTextureDisplacement::import_custom_texture(TextureDisplacementLayer
     set_layer_texture(layer, *entry);
 }
 
+void GLGizmoTextureDisplacement::ease_wheel_scroll(float &target, float &applied)
+{
+    ImGuiIO    &io         = ImGui::GetIO();
+    const float scroll_now = ImGui::GetScrollY();
+    const float scroll_max = ImGui::GetScrollMaxY();
+
+    // Anything that moved the scroll without us - dragging the grab, a keyboard/gamepad nav step, the
+    // content shrinking under a clamped offset, a SetScroll*() call - has to re-seed the target, or the
+    // easing below would immediately drag the view back to where it last animated to.
+    if (applied < 0.f || std::abs(scroll_now - applied) > 0.5f)
+        target = scroll_now;
+
+    if (io.MouseWheel != 0.f && ImGui::IsWindowHovered(ImGuiHoveredFlags_ChildWindows))
+        target -= io.MouseWheel * ImGui::GetFontSize() * 4.f;
+    // Whole pixels: ImGui floors whatever SetScrollY() is given, so a fractional target could never be
+    // reached and the "still gliding" test below would stay true forever, repainting the canvas for good.
+    target = std::floor(std::clamp(target, 0.f, scroll_max));
+
+    const float delta = target - scroll_now;
+    if (std::abs(delta) >= 1.f) {
+        // Exponential ease, formulated against the frame time so the glide takes the same wall time
+        // whether the canvas is running at 30 or 144 fps. The last sub-pixel step would be floored
+        // away, so land on the target outright once the remainder is that small.
+        const float t    = 1.f - std::exp(-20.f * std::clamp(io.DeltaTime, 1.f / 240.f, 1.f / 15.f));
+        const float step = (std::abs(delta * t) < 1.f) ? delta : delta * t;
+        const float next = std::floor(scroll_now + step);
+        ImGui::SetScrollY(next);
+        applied = next;
+        m_parent.set_as_dirty(); // nothing else would redraw mid-glide once the mouse stops
+    } else {
+        applied = scroll_now;
+    }
+}
+
 void GLGizmoTextureDisplacement::render_texture_library_popup(const ImVec2 &panel_min, const ImVec2 &panel_max)
 {
     ModelVolume              *mv    = texture_volume();
@@ -4145,17 +4228,55 @@ void GLGizmoTextureDisplacement::render_texture_library_popup(const ImVec2 &pane
             ImGui::OpenPopup(popup_id);
     }
 
-    const float tile    = std::round(m_imgui->scaled(3.2f));
-    const float spacing = std::round(m_imgui->scaled(0.4f));
-    const float grid_w  = 4.f * tile + 3.f * spacing;
-    const float gap     = m_imgui->scaled(0.5f);
+    const float       tile        = std::round(m_imgui->scaled(3.2f));
+    const float       spacing     = std::round(m_imgui->scaled(0.4f));
+    const float       grid_w      = 4.f * tile + 3.f * spacing;
+    const float       gap         = m_imgui->scaled(0.5f);
+    const float       scrollbar_w = m_imgui->scaled(0.5f);
+    const float       ring_w      = std::max(2.f, std::round(m_imgui->scaled(0.1f))); // the current texture's ring
+    const float       frame_h     = ImGui::GetFrameHeight();
+    const ImVec4      orca        = ImGuiWrapper::COL_ORCA;
+    const ImGuiStyle &style       = ImGui::GetStyle();
+
+    // A fixed size rather than a fit-to-content one. The width is the four-column grid, a gutter and the
+    // slim scrollbar beside it, plus the window padding, so the columns always fit and no horizontal
+    // scrollbar is needed; it derives from scaled values, so it tracks the DPI like the rest.
+    const float fixed_w = grid_w + spacing + scrollbar_w + 2.f * style.WindowPadding.x;
+
+    // BeginPopup() ORs in ImGuiWindowFlags_AlwaysAutoResize (deps_src/imgui/imgui.cpp:8371) and no flag
+    // turns it back off. A SetNextWindowSize() overrides it for each axis it sets (imgui.cpp:5983-5996),
+    // so an explicit size is the only way to fix the popup's size; the grid child below then scrolls.
+    //
+    // Top-aligned with the panel, which keeps it clear of the gizmo toolbar above a docked panel, and as
+    // tall as the panel or 70% of the window, whichever is taller, while keeping a gap inside the window.
+    // The height follows the window and the panel, never the content, so it does not jump as packs load or
+    // sections collapse.
+    const ImGuiViewport *viewport  = ImGui::GetMainViewport();
+    const float          vp_top    = viewport->Pos.y + gap;
+    const float          vp_bottom = viewport->Pos.y + viewport->Size.y - gap;
+    const float          height    = std::max(std::min(std::max(0.70f * viewport->Size.y, panel_max.y - panel_min.y), vp_bottom - vp_top),
+                                              2.f * frame_h);
+    const float          popup_y   = std::max(vp_top, std::min(panel_min.y, vp_bottom - height));
     // Beside the panel rather than over it, so the layer being retextured stays in view: to its left when
     // there is room (the docked panel sits against the right edge of the canvas), otherwise to its right.
-    const float popup_w = grid_w + 2.f * ImGui::GetStyle().WindowPadding.x;
-    const bool  left    = panel_min.x - gap - popup_w >= 0.f;
-    ImGui::SetNextWindowPos(ImVec2(left ? panel_min.x - gap : panel_max.x + gap, panel_min.y + m_imgui->scaled(4.f)),
-                            ImGuiCond_Appearing, ImVec2(left ? 1.f : 0.f, 0.f));
-    if (!ImGui::BeginPopup(popup_id))
+    const float width   = viewport->Size.x > 0.f ? std::min(fixed_w, viewport->Size.x) : fixed_w;
+    const bool  left    = panel_min.x - gap - width >= 0.f;
+    const float popup_x = left ? panel_min.x - gap - width : panel_max.x + gap;
+    // Cond_Always, not Appearing: a viewport resize while the popup is open must move and resize it too.
+    ImGui::SetNextWindowPos(ImVec2(popup_x, popup_y), ImGuiCond_Always);
+    ImGui::SetNextWindowSize(ImVec2(width, height), ImGuiCond_Always);
+    // Drawn as the panel's own sheet: its opaque background and rounding, no border. A popup is filled with
+    // PopupBg, which the panel's toolbar style leaves at ImGui's translucent near-black - a dark window
+    // beside a light panel, with whatever it covers showing through. Only Begin reads these, so they are
+    // popped at once and the tooltips shown from inside keep their own look.
+    ImGui::PushStyleColor(ImGuiCol_PopupBg, ImGui::GetStyleColorVec4(ImGuiCol_WindowBg));
+    ImGui::PushStyleVar(ImGuiStyleVar_PopupRounding, style.WindowRounding);
+    ImGui::PushStyleVar(ImGuiStyleVar_PopupBorderSize, 0.f);
+    // The window itself never scrolls; the grid child below does.
+    const bool open = ImGui::BeginPopup(popup_id, ImGuiWindowFlags_NoScrollbar | ImGuiWindowFlags_NoScrollWithMouse);
+    ImGui::PopStyleVar(2);
+    ImGui::PopStyleColor();
+    if (!open)
         return;
     if (layer == nullptr) {
         ImGui::CloseCurrentPopup();
@@ -4171,16 +4292,51 @@ void GLGizmoTextureDisplacement::render_texture_library_popup(const ImVec2 &pane
     m_tooltip_anchor_max         = ImVec2(m_tooltip_anchor_min.x + ImGui::GetWindowSize().x,
                                           m_tooltip_anchor_min.y + ImGui::GetWindowSize().y);
 
-    m_imgui->push_bold_font();
-    m_imgui->text(_L("Choose a texture"));
-    m_imgui->pop_bold_font();
+    // The header stays put while the grid scrolls under it: the title says what the popup is for, and the
+    // close button is there for anyone who does not know that a click outside closes it.
+    bool close_clicked = false;
+    {
+        ImDrawList  *hdl = ImGui::GetWindowDrawList();
+        const ImVec2 row = ImGui::GetCursorScreenPos();
+        ImGui::SetCursorScreenPos(ImVec2(row.x, row.y + 0.5f * (frame_h - ImGui::GetTextLineHeight())));
+        m_imgui->bold_text(_u8L("Choose a texture"));
+        const ImVec2 btn(ImGui::GetWindowPos().x + ImGui::GetWindowContentRegionMax().x - frame_h, row.y);
+        ImGui::SetCursorScreenPos(btn);
+        close_clicked       = ImGui::InvisibleButton("##close", ImVec2(frame_h, frame_h));
+        const bool   hot    = ImGui::IsItemHovered();
+        const ImVec2 c(btn.x + 0.5f * frame_h, btn.y + 0.5f * frame_h);
+        const float  k      = std::round(0.18f * frame_h);
+        const float  line_w = std::max(1.f, std::round(m_imgui->scaled(0.08f)));
+        const ImU32  x_col  = ImGui::GetColorU32(ImGuiCol_Text, hot ? 1.f : 0.6f);
+        if (hot)
+            hdl->AddCircleFilled(c, 0.5f * frame_h, ImGui::GetColorU32(ImGuiCol_Text, 0.08f));
+        hdl->AddLine(ImVec2(c.x - k, c.y - k), ImVec2(c.x + k, c.y + k), x_col, line_w);
+        hdl->AddLine(ImVec2(c.x - k, c.y + k), ImVec2(c.x + k, c.y - k), x_col, line_w);
+        ImGui::SetCursorScreenPos(ImVec2(row.x, row.y + frame_h + style.ItemSpacing.y));
+        ImGui::Separator();
+    }
 
     const std::vector<TextureLibraryEntry> &library      = texture_library();
-    ImDrawList                             *dl           = ImGui::GetWindowDrawList();
-    const ImU32                             selected_col = ImGui::GetColorU32(ImGuiWrapper::COL_ORCA);
-    std::optional<TextureLibraryEntry>      chosen;
-    std::optional<TextureLibraryEntry>      to_remove;
-    bool                                    import_clicked = false;
+    // A reinstalled pack can drop new bytes at a path already cached on this gizmo, and get_library_texture()
+    // caches a failure as well as a success, so a moved generation makes every cached entry suspect.
+    if (const uint64_t generation = texture_library_generation(); generation != m_library_generation) {
+        m_library_textures.clear();
+        m_library_generation = generation;
+    }
+
+    // The grid scrolls as the panel body does: the same slim scrollbar, and the wheel eased by
+    // ease_wheel_scroll() instead of ImGui's five-line jumps (hence NoScrollWithMouse).
+    push_slim_scrollbar_style(scrollbar_w, wxGetApp().dark_mode());
+    ImGui::BeginChild("##texture_grid", ImVec2(0.f, 0.f), false, ImGuiWindowFlags_NoScrollWithMouse);
+    ease_wheel_scroll(m_picker_scroll_target, m_picker_scroll_applied);
+
+    ImDrawList                        *dl = ImGui::GetWindowDrawList(); // the child's, so tiles clip to the grid
+    std::optional<TextureLibraryEntry> chosen;
+    std::optional<TextureLibraryEntry> to_remove;
+    bool                               import_clicked = false;
+    bool                               download_clicked = false;
+    int                                loads_left       = PICKER_LOADS_PER_FRAME;
+    bool                               loads_deferred   = false;
 
     // Tiles are placed on the four-column grid explicitly rather than flowed with SameLine(): a user tile
     // overlays a remove button on its corner, and that button would otherwise be "the previous item" the
@@ -4196,16 +4352,34 @@ void GLGizmoTextureDisplacement::render_texture_library_popup(const ImVec2 &pane
             ImGui::Dummy(ImVec2(grid_w, float(rows) * tile + float(rows - 1) * spacing));
         }
     };
-    // One group's tiles: shipped textures alphabetically, or the user's own most recently used first (the
-    // order texture_library() keeps), those with a remove button on hover. Returns how many it drew.
-    const auto grid = [&](const ImVec2 &origin, bool user) {
+    // One section's tiles, in the order the section holds them (shipped alphabetically, pack textures by
+    // name, the user's own most recently used first - the order texture_library() produced); a user tile
+    // carries a remove button on hover. Returns how many tiles it laid out, drawn or not.
+    const auto grid = [&](const ImVec2 &origin, const std::vector<const TextureLibraryEntry *> &entries, bool removable) {
         int n = 0;
-        for (const TextureLibraryEntry &entry : library) {
-            if (entry.is_user != user)
+        for (const TextureLibraryEntry *entry : entries) {
+            const ImVec2 rect_min = tile_pos(origin, n++);
+            const ImVec2 rect_max = ImVec2(rect_min.x + tile, rect_min.y + tile);
+            const bool   current  = entry->path == layer->path;
+            // The selected tile is centred even when it is off screen, so it is drawn and loaded next frame.
+            if (current && m_picker_reveal_selected) {
+                ImGui::SetScrollFromPosY(0.5f * (rect_min.y + rect_max.y) - ImGui::GetWindowPos().y, 0.5f);
+                m_parent.request_extra_frame();
+            }
+            if (!ImGui::IsRectVisible(rect_min, rect_max))
                 continue;
-            ImGui::SetCursorScreenPos(tile_pos(origin, n++));
-            ImGui::PushID(entry.path.c_str());
-            const LibraryTexture *tex     = get_library_texture(entry.path);
+            // Thumbnails decode on this thread, so only a few per frame; the rest fill in on later frames.
+            const bool cached = m_library_textures.count(entry->path) != 0;
+            if (!cached && loads_left == 0) {
+                loads_deferred = true;
+                dl->AddRectFilled(rect_min, rect_max, ImGui::GetColorU32(ImGuiCol_FrameBg), style.FrameRounding);
+                continue;
+            }
+            if (!cached)
+                --loads_left;
+            ImGui::SetCursorScreenPos(rect_min);
+            ImGui::PushID(entry->path.c_str());
+            const LibraryTexture *tex     = get_library_texture(entry->path);
             GLTexture            *thumb   = tex != nullptr ? tex->thumbnail.get() : nullptr;
             bool                  clicked = false;
             if (thumb != nullptr) {
@@ -4223,15 +4397,23 @@ void GLGizmoTextureDisplacement::render_texture_library_popup(const ImVec2 &pane
             } else {
                 clicked = ImGui::Button("?", ImVec2(tile, tile));
             }
-            if (user)
+            if (removable)
                 ImGui::SetItemAllowOverlap(); // the remove button drawn over its corner takes its own clicks
-            const ImVec2 a = ImGui::GetItemRectMin(), b = ImGui::GetItemRectMax();
-            if (entry.path == layer->path)
-                dl->AddRect(ImVec2(a.x - 1.f, a.y - 1.f), ImVec2(b.x + 1.f, b.y + 1.f), selected_col, 0.f, 0, 2.f);
-            if (ImGui::IsItemHovered())
-                panel_tooltip(entry.name);
+            const ImVec2 a       = ImGui::GetItemRectMin(), b = ImGui::GetItemRectMax();
+            const bool   hovered = ImGui::IsItemHovered();
+            // The layer's current texture carries an accent ring, and the tile under the pointer a thinner,
+            // fainter one. Both are drawn inside the tile, where the grid's clip rect never cuts them.
+            if (current || hovered) {
+                const float w = current ? ring_w : std::round(0.5f * ring_w);
+                dl->AddRect(ImVec2(a.x + 0.5f * w, a.y + 0.5f * w), ImVec2(b.x - 0.5f * w, b.y - 0.5f * w),
+                            ImGui::GetColorU32(current ? orca : ImVec4(orca.x, orca.y, orca.z, 0.6f)), 0.f, 0, w);
+            }
+            if (hovered)
+                panel_tooltip(entry->name);
 
-            if (user && ImGui::IsMouseHoveringRect(a, b)) {
+            // Clipped by the grid's clip rect, so a tile scrolled out of the grid or under its scrollbar
+            // does not offer its remove button. IsMouseHoveringRect() clips by default.
+            if (removable && ImGui::IsMouseHoveringRect(a, b)) {
                 const float  r = std::round(tile * 0.17f);
                 const ImVec2 c(b.x - r - 2.f, a.y + r + 2.f);
                 ImGui::SetCursorScreenPos(ImVec2(c.x - r, c.y - r));
@@ -4244,27 +4426,162 @@ void GLGizmoTextureDisplacement::render_texture_library_popup(const ImVec2 &pane
                 if (hot)
                     panel_tooltip(_u8L("Remove from My textures"));
                 if (remove_clicked)
-                    to_remove = entry;
+                    to_remove = *entry;
             }
             ImGui::PopID();
             if (clicked)
-                chosen = entry;
+                chosen = *entry;
         }
         return n;
     };
 
-    ImGui::TextDisabled("%s", _u8L("Built-in").c_str());
+    // Every section collapses; the state is remembered for the app run. Pack keys use pack_name, a
+    // capability name unique per type across loaded packages and stable across reinstalls. This function-local
+    // static survives popup closes, never touches app_config, and resets on restart.
+    static std::map<std::string, bool> s_section_collapsed; // true = collapsed; absent = expanded
+
+    const auto split_pack_title = [](const std::string &title) -> std::pair<std::string, std::string> {
+        size_t split = std::string::npos;
+        for (size_t i = 0; i + 3 < title.size(); ++i)
+            if (title[i] == ' ' && (title[i + 1] == 'b' || title[i + 1] == 'B') &&
+                (title[i + 2] == 'y' || title[i + 2] == 'Y') && title[i + 3] == ' ')
+                split = i;
+        if (split == std::string::npos)
+            return { title, {} };
+
+        std::string name = title.substr(0, split);
+        while (!name.empty() && std::isspace(static_cast<unsigned char>(name.back())))
+            name.pop_back();
+        std::string attribution = title.substr(split);
+        size_t      first         = 0;
+        while (first < attribution.size() && std::isspace(static_cast<unsigned char>(attribution[first])))
+            ++first;
+        attribution.erase(0, first);
+        if (name.empty() || attribution.empty())
+            return { title, {} };
+        return { name, attribution };
+    };
+
+    // A section heading, one row as wide as the grid: a click anywhere on it collapses or expands the
+    // section. Child headings indent their contents while keeping their counts right-aligned. Attribution
+    // lines use a smaller disabled style; the grid follows closer than the next heading does.
+    // Returns true when the section is open, so the caller knows whether to draw its contents.
+    const auto section_header = [&](const std::string &key, const std::string &title, size_t count, float indent,
+                                    const std::string &attribution, const std::string &full_title) {
+        bool        &collapsed = s_section_collapsed[key]; // default-inserts false -> expanded
+        const ImVec2 row       = ImGui::GetCursorScreenPos();
+        const bool   two_lines = !attribution.empty();
+        const float  line_h          = ImGui::GetTextLineHeight();
+        const float  small_font_size = ImGui::GetFontSize() * 0.8f;
+        const float  small_line_h    = line_h * 0.8f;
+        const float  row_h           = two_lines ? std::max(frame_h, line_h + small_line_h + spacing) : frame_h;
+        const ImVec2 row_max(row.x + grid_w, row.y + row_h);
+        if (ImGui::InvisibleButton(key.c_str(), ImVec2(grid_w, row_h)))
+            collapsed = !collapsed;
+        const bool hovered = ImGui::IsItemHovered();
+        if (hovered)
+            dl->AddRectFilled(row, row_max, ImGui::GetColorU32(ImGuiCol_Text, 0.05f), style.FrameRounding);
+
+        const float inset = std::round(0.25f * frame_h);
+        const float arrow = std::round(ImGui::GetFontSize() * 0.55f);
+        const float cx = row.x + inset + indent + 0.5f * arrow;
+        const float cy = row.y + 0.5f * row_h;
+        const float hs = 0.3f * arrow;
+        const ImU32 accent = ImGui::GetColorU32(orca);
+        if (collapsed)
+            dl->AddTriangleFilled(ImVec2(cx - 0.5f * hs, cy - hs), ImVec2(cx + 0.5f * hs, cy), ImVec2(cx - 0.5f * hs, cy + hs), accent);
+        else
+            dl->AddTriangleFilled(ImVec2(cx - hs, cy - 0.5f * hs), ImVec2(cx + hs, cy - 0.5f * hs), ImVec2(cx, cy + 0.5f * hs), accent);
+
+        const std::string n     = std::to_string(count);
+        const float       n_w   = ImGui::CalcTextSize(n.c_str()).x;
+        const float       tx    = row.x + inset + indent + arrow + spacing;
+        const float       max_text_w = std::max(0.f, row_max.x - inset - n_w - spacing - tx);
+        const std::string shown = ellipsize(title, max_text_w);
+        const std::string shown_attribution = two_lines ? ellipsize(attribution, max_text_w, small_font_size) : std::string{};
+        const float       title_y            = two_lines ? row.y + 0.5f * (row_h - line_h - small_line_h)
+                                                         : row.y + 0.5f * (frame_h - line_h);
+        const float       count_y            = row.y + 0.5f * (row_h - line_h);
+        dl->AddText(ImVec2(tx, title_y), ImGui::GetColorU32(ImGuiCol_Text), shown.c_str());
+        if (two_lines)
+            dl->AddText(ImGui::GetFont(), small_font_size, ImVec2(tx, title_y + line_h),
+                        ImGui::GetColorU32(ImGuiCol_TextDisabled), shown_attribution.c_str());
+        dl->AddText(ImVec2(row_max.x - inset - n_w, count_y), ImGui::GetColorU32(ImGuiCol_TextDisabled), n.c_str());
+        if (hovered && (shown != title || shown_attribution != attribution))
+            panel_tooltip(full_title); // a long plugin-supplied name, cut by the fixed width
+        ImGui::SetCursorScreenPos(ImVec2(row.x, row_max.y + spacing));
+        return !collapsed;
+    };
+
+    // Built-in is first, plugin packs are grouped under Texture libraries, and My
+    // textures stays last so its import tile and help line describe that group. Pack names identify both
+    // their child section and state.
+    struct Section
     {
+        std::string                              key;
+        std::string                              title;
+        std::vector<const TextureLibraryEntry *> entries;
+    };
+    std::vector<Section>          sections;
+    std::map<std::string, size_t> pack_section; // pack_name -> index in `sections`
+    sections.push_back({ "builtin:", _u8L("Built-in"), {} });
+    for (const TextureLibraryEntry &entry : library) {
+        if (entry.source == TextureSource::Shipped) {
+            sections.front().entries.push_back(&entry); // the section exists even when the library is empty
+            continue;
+        }
+        if (entry.source == TextureSource::User)
+            continue; // added below, so My textures stays last
+        if (entry.source != TextureSource::Plugin)
+            continue;
+        const auto [it, inserted] = pack_section.emplace(entry.pack_name, sections.size());
+        if (inserted)
+            sections.push_back({ "pack:" + entry.pack_name, entry.pack_name, {} });
+        sections[it->second].entries.push_back(&entry);
+    }
+    sections.push_back({ "user:", _u8L("My textures"), {} });
+    for (const TextureLibraryEntry &entry : library)
+        if (entry.source == TextureSource::User)
+            sections.back().entries.push_back(&entry);
+
+    const float child_indent = std::round(m_imgui->scaled(0.8f));
+    const Section &built_in = sections.front();
+    if (section_header(built_in.key, built_in.title, built_in.entries.size(), 0.f, {}, built_in.title)) {
         const ImVec2 origin = ImGui::GetCursorScreenPos();
-        const int    count  = grid(origin, false);
+        const int    count  = grid(origin, built_in.entries, false);
         end_grid(origin, count);
         if (count == 0)
             ImGui::TextDisabled("%s", _u8L("No textures found.").c_str());
     }
-    ImGui::TextDisabled("%s", _u8L("My textures").c_str());
-    {
+
+    size_t subscribed_count = 0;
+    for (size_t i = 1; i + 1 < sections.size(); ++i)
+        subscribed_count += sections[i].entries.size();
+
+    const std::string subscribed_title = _u8L("Texture libraries");
+    if (section_header("subscribed:", subscribed_title, subscribed_count, 0.f, {}, subscribed_title)) {
+        for (size_t i = 1; i + 1 < sections.size(); ++i) {
+            const Section &pack = sections[i];
+            const auto [name, attribution] = split_pack_title(pack.title);
+            if (!section_header(pack.key, name, pack.entries.size(), child_indent, attribution, pack.title))
+                continue;
+            const ImVec2 origin = ImGui::GetCursorScreenPos();
+            const int    count  = grid(origin, pack.entries, false);
+            end_grid(origin, count);
+        }
+
+        ImGui::Dummy(ImVec2(0.f, spacing));
+        const std::string download_label = _u8L("Explore more texture libraries");
+        if (ImGui::Button(download_label.c_str(), ImVec2(grid_w, frame_h)))
+            download_clicked = true;
+        if (ImGui::IsItemHovered())
+            panel_tooltip(_u8L("Opens OrcaCloud in the Home page to browse for plugins."));
+    }
+
+    const Section &user = sections.back();
+    if (section_header(user.key, user.title, user.entries.size(), 0.f, {}, user.title)) {
         const ImVec2 origin = ImGui::GetCursorScreenPos();
-        const int    count  = grid(origin, true);
+        const int    count  = grid(origin, user.entries, true);
         ImGui::SetCursorScreenPos(tile_pos(origin, count));
         if (ImGui::Button("+##import_texture", ImVec2(tile, tile)))
             import_clicked = true;
@@ -4273,17 +4590,27 @@ void GLGizmoTextureDisplacement::render_texture_library_popup(const ImVec2 &pane
                                "bakes from and saved to your personal texture folder, kept separate from the "
                                "textures shipped with OrcaSlicer."));
         end_grid(origin, count + 1);
+        // Belongs to this section: it describes the import tile and the remove-on-hover tiles, both of
+        // which live here, so it is hidden with them rather than left describing controls off-screen.
+        ImGui::PushTextWrapPos(ImGui::GetCursorPosX() + grid_w);
+        ImGui::TextDisabled("%s", _u8L("PNG, JPG or BMP - converted to a height map on import. Hover one of yours to remove it.").c_str());
+        ImGui::PopTextWrapPos();
     }
+    if (loads_deferred)
+        m_parent.request_extra_frame();
+    // Done whether or not the current texture was drawn: one in a collapsed section stays where it is.
+    m_picker_reveal_selected = false;
+    ImGui::EndChild();
+    pop_slim_scrollbar_style();
 
-    ImGui::PushTextWrapPos(ImGui::GetCursorPosX() + grid_w);
-    ImGui::TextDisabled("%s", _u8L("PNG, JPG or BMP - converted to a height map on import. Hover one of yours to remove it.").c_str());
-    ImGui::PopTextWrapPos();
-
-    if (chosen || import_clicked)
+    if (chosen || import_clicked || close_clicked || download_clicked)
         ImGui::CloseCurrentPopup();
     m_tooltip_anchor_min = prev_anchor_min;
     m_tooltip_anchor_max = prev_anchor_max;
     ImGui::EndPopup();
+    // The OrcaCloud plugin hub filtered to resource textures; the pane's session handoff redirects here.
+    if (download_clicked)
+        wxGetApp().open_orca_cloud("/app/plugins/plugin-hub?types=resource-textures");
 
     // Only once the loop over the library is done: importing, picking (which reorders the recently used)
     // and removing all change the library the loop was iterating.
@@ -6586,19 +6913,6 @@ void GLGizmoTextureDisplacement::on_render_input_window(float x, float y, float
         m_imgui->text(text);
         m_imgui->pop_bold_font();
     };
-    // Cuts a UTF-8 string down to `max_w` pixels, ending it in "..." when it had to be cut.
-    const auto ellipsize = [](std::string s, float max_w) {
-        if (ImGui::CalcTextSize(s.c_str()).x <= max_w)
-            return s;
-        while (!s.empty() && ImGui::CalcTextSize((s + "...").c_str()).x > max_w) {
-            unsigned char c;
-            do { // a whole code point at a time
-                c = static_cast<unsigned char>(s.back());
-                s.pop_back();
-            } while (!s.empty() && (c & 0xC0) == 0x80);
-        }
-        return s + "...";
-    };
     // Label column + a slider filling the rest of the row, value printed inside the track.
     // `right_inset` keeps a layer card's inner padding.
     const auto slider_label = [&](const wxString &label) {
@@ -6791,52 +7105,11 @@ void GLGizmoTextureDisplacement::on_render_input_window(float x, float y, float
                                                                  style.WindowPadding.y - style.ItemSpacing.y);
     const float body_h     = m_panel_body_h > 0.f ? std::min(m_panel_body_h + 1.f, max_body_h) : max_body_h;
 
-    // ImGui's stock scrollbar is a wide, square-cornered slab in a tinted track - against this flat panel
-    // it reads as a raw widget bolted onto the edge. Slim it to a rounded thumb over an invisible track.
-    const float  scrollbar_w = m_imgui->scaled(0.5f);
-    const ImVec4 grab        = dark ? ImVec4(1.f, 1.f, 1.f, 0.26f) : ImVec4(0.f, 0.f, 0.f, 0.26f);
-    ImGui::PushStyleVar(ImGuiStyleVar_ScrollbarSize, scrollbar_w);
-    ImGui::PushStyleVar(ImGuiStyleVar_ScrollbarRounding, 0.5f * scrollbar_w);
-    ImGui::PushStyleColor(ImGuiCol_ScrollbarBg, ImVec4(0.f, 0.f, 0.f, 0.f));
-    ImGui::PushStyleColor(ImGuiCol_ScrollbarGrab, grab);
-    ImGui::PushStyleColor(ImGuiCol_ScrollbarGrabHovered, ImVec4(grab.x, grab.y, grab.z, 0.45f));
-    ImGui::PushStyleColor(ImGuiCol_ScrollbarGrabActive, ImVec4(grab.x, grab.y, grab.z, 0.65f));
-    ImGui::PushStyleColor(ImGuiCol_ChildBg, ImVec4(0.f, 0.f, 0.f, 0.f));
-    // NoScrollWithMouse: the wheel is handled below so the scroll can be eased instead of teleporting
-    // five text lines per notch, which on blocks this tall lost the reader's place.
+    push_slim_scrollbar_style(m_imgui->scaled(0.5f), dark);
+    // NoScrollWithMouse: ease_wheel_scroll() eases the scroll instead of teleporting five text lines per
+    // notch, which on blocks this tall lost the reader's place.
     ImGui::BeginChild("##td_body", ImVec2(panel_w, body_h), false, ImGuiWindowFlags_NoScrollWithMouse);
-    {
-        ImGuiIO    &io         = ImGui::GetIO();
-        const float scroll_now = ImGui::GetScrollY();
-        const float scroll_max = ImGui::GetScrollMaxY();
-
-        // Anything that moved the scroll without us - dragging the grab, a keyboard/gamepad nav step, the
-        // content shrinking under a clamped offset - has to re-seed the target, or the easing below would
-        // immediately drag the view back to where it last animated to.
-        if (m_panel_scroll_applied < 0.f || std::abs(scroll_now - m_panel_scroll_applied) > 0.5f)
-            m_panel_scroll_target = scroll_now;
-
-        if (io.MouseWheel != 0.f && ImGui::IsWindowHovered(ImGuiHoveredFlags_ChildWindows))
-            m_panel_scroll_target -= io.MouseWheel * ImGui::GetFontSize() * 4.f;
-        // Whole pixels: ImGui floors whatever SetScrollY() is given, so a fractional target could never be
-        // reached and the "still gliding" test below would stay true forever, repainting the canvas for good.
-        m_panel_scroll_target = std::floor(std::clamp(m_panel_scroll_target, 0.f, scroll_max));
-
-        const float delta = m_panel_scroll_target - scroll_now;
-        if (std::abs(delta) >= 1.f) {
-            // Exponential ease, formulated against the frame time so the glide takes the same wall time
-            // whether the canvas is running at 30 or 144 fps. The last sub-pixel step would be floored
-            // away, so land on the target outright once the remainder is that small.
-            const float t    = 1.f - std::exp(-20.f * std::clamp(io.DeltaTime, 1.f / 240.f, 1.f / 15.f));
-            const float step = (std::abs(delta * t) < 1.f) ? delta : delta * t;
-            const float next = std::floor(scroll_now + step);
-            ImGui::SetScrollY(next);
-            m_panel_scroll_applied = next;
-            m_parent.set_as_dirty(); // nothing else would redraw mid-glide once the mouse stops
-        } else {
-            m_panel_scroll_applied = scroll_now;
-        }
-    }
+    ease_wheel_scroll(m_panel_scroll_target, m_panel_scroll_applied);
 
     // Everything that changes the layer list is deferred until the list is no longer being drawn:
     // removing or reordering shifts mv->texture_displacement_layers under the pointers the loop holds,
@@ -7081,8 +7354,9 @@ void GLGizmoTextureDisplacement::on_render_input_window(float x, float y, float
 
     // Opens the texture library for a layer, making it the active one too (after the loop).
     const auto open_picker = [&](int slot) {
-        m_picker_slot         = slot;
-        m_picker_open_request = true;
+        m_picker_slot            = slot;
+        m_picker_open_request    = true;
+        m_picker_reveal_selected = true;
     };
     // The six-dot drag icon, drawn into `list` over [x, x + w] x [y, y + h].
     const auto draw_drag_icon = [&](ImDrawList *list, float x, float y, float w, float h, ImU32 tint) {
@@ -8077,8 +8351,7 @@ void GLGizmoTextureDisplacement::on_render_input_window(float x, float y, float
     // height of everything above, whether or not it is scrolled.
     m_panel_body_h = ImGui::GetCursorPosY() - style.ItemSpacing.y;
     ImGui::EndChild();
-    ImGui::PopStyleColor(5);
-    ImGui::PopStyleVar(2);
+    pop_slim_scrollbar_style();
 
     // The layer-list changes deferred from the loop above.
     if (slot_to_remove >= 0)

src/slic3r/GUI/Gizmos/GLGizmoTextureDisplacement.hpp

@@ -428,6 +428,10 @@ private:
     void render_texture_library_popup(const ImVec2 &panel_min, const ImVec2 &panel_max);
     int  m_picker_slot         = -1;
     bool m_picker_open_request = false;
+    // Set when the popup opens, so the next layout scrolls the layer's current texture into view.
+    bool  m_picker_reveal_selected = false;
+    float m_picker_scroll_target   = 0.f;  // see ease_wheel_scroll()
+    float m_picker_scroll_applied  = -1.f;
     void set_layer_texture(TextureDisplacementLayer &layer, const TextureLibraryEntry &entry);
     void import_custom_texture(TextureDisplacementLayer &layer);
 
@@ -1062,6 +1066,8 @@ private:
 
     // Library textures the picker has shown at least once, keyed by file path (see LibraryTexture).
     std::map<std::string, LibraryTexture> m_library_textures;
+    // Generation of the library the above were cached against; a change clears them.
+    uint64_t                              m_library_generation = 0;
 
     // Everything the *unwrap* depends on. update_uv_editor() runs from rebuild_preview(), i.e. on
     // every stroke end and every slider release - but depth/tiling/rotation/offset/blend change
@@ -1103,12 +1109,15 @@ private:
     // The config key behind m_undocked.
     static constexpr const char *UNDOCKED_CONFIG_KEY = "texture_displacement_panel_undocked";
 
-    // Smooth scrolling for the panel body (everything between the header and the pinned Bake footer).
-    // ImGui jumps a fixed number of lines per wheel notch, which on tall layer cards reads as a hard
-    // jolt rather than a scroll. The wheel is intercepted (ImGuiWindowFlags_NoScrollWithMouse) and
-    // moves a *target* offset instead; the real scroll is eased toward it over the following frames.
+    // Smooth scrolling for a child window, called inside it: the panel body (everything between the header
+    // and the pinned Bake footer) and the texture library's grid. ImGui jumps a fixed number of lines per
+    // wheel notch, which on tall layer cards reads as a hard jolt rather than a scroll. The child sets
+    // ImGuiWindowFlags_NoScrollWithMouse, and the wheel moves `target` instead; the real scroll is eased
+    // toward it over the following frames. `applied` is what the easing wrote last frame, <0 until the
+    // first one.
+    void  ease_wheel_scroll(float &target, float &applied);
     float m_panel_scroll_target  = 0.f;
-    float m_panel_scroll_applied = -1.f; // what the easing wrote last frame; <0 until the first one
+    float m_panel_scroll_applied = -1.f;
     // Last frame's body content height and footer height. The body is a child window that has to be
     // given its height before its content is laid out, so it is sized from the previous frame: as tall
     // as its content, capped so the footer still fits above the bottom of the canvas.

src/slic3r/GUI/Gizmos/GLGizmoUtils.cpp

@@ -83,11 +83,13 @@ namespace Slic3r::GUI::GLGizmoUtils {
         bool  clicked = toolbar_circular_button(icon, "##wiki_guide_btn", scale);
         if (url && *url && clicked)
             wxLaunchDefaultBrowser(wxString::FromUTF8(url));
+        // ImGuiWrapper::tooltip keeps the text readable on the dark tooltip background whatever text colour the
+        // host window pushed; a negative wrap position keeps the URL on one line.
         if (ImGui::IsItemHovered()){
             if(url && *url)
-                ImGui::SetTooltip("%s\n%s", _u8L("Wiki Guide").c_str(), url);
+                wxGetApp().imgui()->tooltip(_u8L("Wiki Guide") + "\n" + url, -1.f);
             else
-                ImGui::SetTooltip("%s", _u8L("Wiki Guide").c_str());
+                wxGetApp().imgui()->tooltip(_u8L("Wiki Guide"), -1.f);
         }
         return clicked; // for dynamically generated links
     }
@@ -101,9 +103,9 @@ namespace Slic3r::GUI::GLGizmoUtils {
             wxLaunchDefaultBrowser(wxString::FromUTF8(url));
         if (ImGui::IsItemHovered()){
             if(url && *url)
-                ImGui::SetTooltip("%s\n%s", _u8L("Video Guide").c_str(), url);
+                wxGetApp().imgui()->tooltip(_u8L("Video Guide") + "\n" + url, -1.f);
             else
-                ImGui::SetTooltip("%s", _u8L("Video Guide").c_str());
+                wxGetApp().imgui()->tooltip(_u8L("Video Guide"), -1.f);
         }
         return clicked; // for dynamically generated links
     }

src/slic3r/GUI/Gizmos/GizmoObjectManipulation.cpp

@@ -857,11 +857,12 @@ void GizmoObjectManipulation::do_render_move_window(ImGuiWrapper *imgui_wrapper,
     if (render_combo(imgui_wrapper, "", modes, selection_idx, 0, coord_combo_width)) {
         combox_changed = true;
     }
+    ImGuiWrapper::pop_combo_style();
+    // After pop_combo_style(): its light popup background would hide the tooltip's white text.
     if (ImGui::IsItemHovered()) {
         auto tooltip_str = _L("Coordinate system used for transform actions.");
         imgui_wrapper->tooltip(tooltip_str, imgui_wrapper->calc_text_size(tooltip_str).x + 3 * space_size);
     }
-    ImGuiWrapper::pop_combo_style();
 
     // ORCA use TextColored to match axes color
     float offset_to_center = (unit_size - ImGui::CalcTextSize("O").x) / 2;
@@ -964,11 +965,12 @@ void GizmoObjectManipulation::do_render_move_window(ImGuiWrapper *imgui_wrapper,
         if (render_combo(imgui_wrapper, "", align_modes, align_mode_idx, 0, coord_combo_width))
             m_align_to_parent = align_mode_idx + 1 == align_modes.size();
         ImGui::PopID();
+        ImGuiWrapper::pop_combo_style();
+        // After pop_combo_style(): its light popup background would hide the tooltip's white text.
         if (ImGui::IsItemHovered()) {
             wxString tooltip_str = _L("Reference for alignment");
             imgui_wrapper->tooltip(tooltip_str, imgui_wrapper->calc_text_size(tooltip_str).x + 3 * space_size);
         }
-        ImGuiWrapper::pop_combo_style();
 
         const bool dark_mode    = wxGetApp().dark_mode();
         int        current_axis = -1;
@@ -1377,11 +1379,12 @@ void GizmoObjectManipulation::do_render_scale_input_window(ImGuiWrapper* imgui_w
     if (render_combo(imgui_wrapper, "", modes, selection_idx, 0, coord_combo_width)) {
         combox_changed = true;
     }
+    ImGuiWrapper::pop_combo_style();
+    // After pop_combo_style(): its light popup background would hide the tooltip's white text.
     if (ImGui::IsItemHovered()) {
         auto tooltip_str = _L("Coordinate system used for transform actions.");
         imgui_wrapper->tooltip(tooltip_str, imgui_wrapper->calc_text_size(tooltip_str).x + 3 * space_size);
     }
-    ImGuiWrapper::pop_combo_style();
 
     // ORCA use TextColored to match axes color
     float offset_to_center = (unit_size - ImGui::CalcTextSize("O").x) / 2;

src/slic3r/GUI/ImGuiWrapper.cpp

@@ -62,6 +62,7 @@
 #include "Search.hpp"
 #include "BitmapCache.hpp"
 #include "GUI_App.hpp"
+#include "KeyChord.hpp"
 
 #include <nanosvg/nanosvg.h>
 #include <nanosvg/nanosvgrast.h>
@@ -505,10 +506,12 @@ bool ImGuiWrapper::update_mouse_data(wxMouseEvent& evt)
     io.MouseDown[0] = evt.LeftIsDown();
     io.MouseDown[1] = evt.RightIsDown();
     io.MouseDown[2] = evt.MiddleIsDown();
-    float wheel_delta = static_cast<float>(evt.GetWheelDelta());
-    if (wheel_delta != 0.0f) {
+    // Only a vertical wheel event with a direction is a wheel step. A macOS trackpad reports sideways motion
+    // as separate horizontal events, and its wheel events often carry a rotation of 0: wx truncates the
+    // sub-pixel deltas to whole ones and passes on events with no delta at all. Read as vertical steps,
+    // either kind scrolls against the gesture, and scrolling up bounces back and forth.
+    if (evt.GetWheelAxis() == wxMOUSE_WHEEL_VERTICAL && evt.GetWheelRotation() != 0)
         io.MouseWheel = evt.GetWheelRotation() > 0 ? 1.f : -1.f;
-    }
     unsigned buttons = (evt.LeftIsDown() ? 1 : 0) | (evt.RightIsDown() ? 2 : 0) | (evt.MiddleIsDown() ? 4 : 0);
     m_mouse_buttons = buttons;
 
@@ -2132,6 +2135,27 @@ bool ImGuiWrapper::want_any_input() const
     return io.WantCaptureMouse || io.WantCaptureKeyboard || io.WantTextInput;
 }
 
+bool ImGuiWrapper::text_input_active() const
+{
+    const ImGuiID id = ImGui::GetActiveID();
+    return id != 0 && ImGui::GetInputTextState(id) != nullptr;
+}
+
+bool ImGuiWrapper::modal_popup_open() const
+{
+    // A modal stays on the popup stack while its canvas is hidden, so it counts only if the last finished
+    // frame drew it, which NewFrame() moves from Active to WasActive.
+    const ImGuiWindow* modal = ImGui::GetTopMostPopupModal();
+    if (modal == nullptr)
+        return false;
+    return ImGui::GetCurrentContext()->WithinFrameScope ? modal->WasActive : modal->Active;
+}
+
+bool ImGuiWrapper::owns_key(const KeyChord& chord) const
+{
+    return modal_popup_open() || (chord.edits_text() && text_input_active());
+}
+
 ImFontAtlasCustomRect* ImGuiWrapper::GetTextureCustomRect(const wchar_t& tex_id)
 {
     auto item = m_custom_glyph_rects_ids.find(tex_id);

src/slic3r/GUI/ImGuiWrapper.hpp

@@ -35,6 +35,7 @@ struct ImRect;
 namespace Slic3r {
 namespace GUI {
 
+struct KeyChord;
 
 bool get_data_from_svg(const std::string &filename, unsigned int max_size_px, ThumbnailData &thumbnail_data);
 
@@ -219,6 +220,12 @@ public:
     bool want_keyboard() const;
     bool want_text_input() const;
     bool want_any_input() const;
+    // True while an ImGui InputText is active, without the one-frame lag of want_text_input().
+    bool text_input_active() const;
+    // True while an ImGui modal popup is on screen.
+    bool modal_popup_open() const;
+    // True for every key while a modal is open, and for text-editing keys while an InputText is active.
+    bool owns_key(const KeyChord& chord) const;
 
     // Optional inputs are used for set up value inside of an optional, with default value
     // 

src/slic3r/GUI/KBShortcutsDialog.cpp

@@ -173,7 +173,7 @@ void KBShortcutsDialog::fill_pages()
     using Section              = ShortcutSection;
 
     if (wxGetApp().is_editor()) {
-        page(_L("Global"), _L("Available anywhere in the window, even while typing in a text field."), ShortcutContext::Global, {
+        page(_L("Global"), _L("Available anywhere in the window."), ShortcutContext::Global, {
             fixed(Section::SpeedDial, { alt, "1-9, 0" }, L("Run favorite 1 to 10")),
             fixed(Section::SpeedDial, { ctrl, "B" }, L("Pin or unpin the selected action")),
             // wx cycles notebook pages on Ctrl+Tab, which is Cmd+Tab on macOS and never arrives there.
@@ -438,17 +438,16 @@ ShortcutCaptureDialog::ShortcutCaptureDialog(wxWindow* parent, Shortcut shortcut
     SetBackgroundColour(*wxWHITE);
     wxBoxSizer* sizer = new wxBoxSizer(wxVERTICAL);
 
-    // A Global shortcut also runs while a text field has the focus, so its hint names the keys it can use.
+    // A Global shortcut runs before the focused control gets the key, so its hint names the keys it can use.
     const bool     global = (shortcut_info(shortcut).contexts & context_bit(ShortcutContext::Global)) != 0;
     const wxString advice = global_key_advice();
-    const wxString typing = _L("Global shortcuts also apply while typing.");
     const wxString rule   = _L("A key that types a character cannot be a global shortcut.");
-    m_hint      = global ? typing + "\n" + advice : _L("Esc cancels, Enter confirms.");
+    m_hint      = global ? advice : _L("Esc cancels, Enter confirms.");
     m_rejection = rule + "\n" + advice;
 
     // Wide enough for each sentence on a line of its own where the translation allows, within limits.
     int width = FromDIP(450);
-    for (const wxString& sentence : { typing, rule, advice }) {
+    for (const wxString& sentence : { rule, advice }) {
         int extent = 0;
         GetTextExtent(sentence, &extent, nullptr, nullptr, nullptr, &wxGetApp().normal_font());
         width = std::max(width, extent);

src/slic3r/GUI/KeyChord.cpp

@@ -187,6 +187,40 @@ bool KeyChord::is_menu_accelerator() const
     return valid() && ((modifiers & (wxMOD_CONTROL | wxMOD_ALT | wxMOD_RAW_CONTROL)) != 0 || (!is_printable(key) && key != WXK_SPACE));
 }
 
+bool KeyChord::edits_text() const
+{
+    if (!valid())
+        return false;
+    if (!is_menu_accelerator())
+        return true;
+    const int mods = modifiers & ~wxMOD_SHIFT;
+    switch (key) {
+    case WXK_LEFT: case WXK_RIGHT: case WXK_UP: case WXK_DOWN:
+    case WXK_HOME: case WXK_END: case WXK_BACK: case WXK_DELETE:
+#ifdef __APPLE__
+        return mods == wxMOD_NONE || mods == wxMOD_CONTROL || mods == wxMOD_ALT; // Option moves by word
+#else
+        return mods == wxMOD_NONE || mods == wxMOD_CONTROL;
+#endif
+    case WXK_INSERT:
+        return mods == wxMOD_NONE || mods == wxMOD_CONTROL;
+    case WXK_RETURN: case WXK_TAB: case WXK_ESCAPE: case WXK_PAGEUP: case WXK_PAGEDOWN:
+        return mods == wxMOD_NONE;
+    default:
+        break;
+    }
+    if (!is_printable(key))
+        return false;
+#ifdef __APPLE__
+    if (mods == wxMOD_ALT || mods == wxMOD_RAW_CONTROL)
+        return true; // Option types a character, Control runs the Cocoa text key bindings
+#else
+    if (mods == (wxMOD_CONTROL | wxMOD_ALT))
+        return true; // AltGr types a character
+#endif
+    return mods == wxMOD_CONTROL && (key == 'A' || key == 'C' || key == 'V' || key == 'X' || key == 'Y' || key == 'Z');
+}
+
 // Only a chord the desktop acts on while still delivering it to the app belongs here.
 bool KeyChord::is_system_shortcut() const
 {

src/slic3r/GUI/KeyChord.hpp

@@ -35,6 +35,9 @@ struct KeyChord
     // True when Ctrl or Alt is held or the key is non-printable, the chords a menu can own without
     // swallowing typing in text fields.
     bool is_menu_accelerator() const;
+    // True for a chord a focused text field acts on: typing a character (AltGr and macOS Option
+    // characters included), moving the caret, selecting, deleting, or the clipboard and undo chords.
+    bool edits_text() const;
     // True for a chord the desktop acts on although the app receives it, so a binding would
     // take it from the system.
     bool is_system_shortcut() const;

src/slic3r/GUI/MainFrame.cpp

@@ -50,6 +50,7 @@
 #include <wx/panel.h>
 #include <wx/settings.h>
 #include <wx/textentry.h>
+#include <wx/spinctrl.h>
 #include <wx/notebook.h>
 #include <wx/listbook.h>
 #include <wx/simplebook.h>
@@ -107,6 +108,8 @@
 #include "../Utils/PrintHost.hpp"
 
 #include "GUI_App.hpp"
+#include "ImGuiWrapper.hpp"
+#include "OpenGLManager.hpp"
 #include "Shortcuts.hpp"
 #include "UnsavedChangesDialog.hpp"
 #include "PublishSettingsDialog.hpp"
@@ -184,18 +187,31 @@ enum class ERescaleTarget
 
 namespace {
 
+bool focus_is_text_field(wxWindow* focus)
+{
+    if (dynamic_cast<wxTextEntryBase*>(focus) || dynamic_cast<wxWebView*>(focus))
+        return true; // a web page can have its own text fields
+    if (dynamic_cast<wxSpinCtrl*>(focus) || dynamic_cast<wxSpinCtrlDouble*>(focus))
+        return true; // the native Windows spin control is not a wxTextEntry
+    return false;
+}
+
+// Only a scene canvas draws ImGui, and a hidden one can keep the wx focus after a tab switch.
+const ImGuiWrapper* focused_canvas_imgui(wxWindow* focus)
+{
+    if (!OpenGLManager::is_scene_canvas(focus) || !focus->IsShownOnScreen())
+        return nullptr;
+    return wxGetApp().imgui();
+}
+
 // Space opens the speed dial, but it is the activation key for buttons, checkboxes and other
-// controls. CHAR_HOOK runs before the focused child, so only take Space when the focused window has
-// no keyboard-activation meaning of its own. Canvases (GLCanvas3D) and panels are not controls and
-// fall through to "open"; the Notebook itself does too, so Space still opens the dial on any page.
+// controls, so only take Space when the focused window has no keyboard-activation meaning of its
+// own. Canvases (GLCanvas3D) and panels are not controls and fall through to "open"; the Notebook
+// itself does too, so Space still opens the dial on any page.
 bool focus_keeps_space(wxWindow* focus)
 {
     if (!focus)
         return false;
-    if (dynamic_cast<wxTextEntryBase*>(focus))
-        return true; // typing a space into a text field
-    if (dynamic_cast<wxWebView*>(focus))
-        return true; // web content scrolls and hosts its own text fields
     if (dynamic_cast<::Button*>(focus))
         return true; // custom button: Space clicks it (it is a wxWindow, not a wxControl)
     if (dynamic_cast<StaticBox*>(focus))
@@ -816,16 +832,12 @@ DPIFrame(NULL, wxID_ANY, "", wxDefaultPosition, wxDefaultSize, BORDERLESS_FRAME_
 
 bool MainFrame::handle_global_shortcut(const KeyChord& chord)
 {
-    // ImGui draws its text fields (the text tool's box, a sketch value field) on the GL canvas, so
-    // while one of them is typed into the focused wx window is that canvas or an in-canvas frame:
-    // neither is a wxControl, so focus_keeps_space() cannot see it and CHAR_HOOK takes the chord
-    // here first -- Space opened the Speed Dial, Ctrl+P the Preferences, and the field never saw
-    // the key. ImGui raises WantCaptureKeyboard while one of its items owns the keyboard, so leave
-    // the key to it then. A focused wxControl (text field, list, web view) is untouched: those
-    // keep their own keys, and ImGui's flag can outlive the focus moving to one of them.
+    // CHAR_HOOK runs before the focused window, so leave text-editing keys to a focused text field and
+    // the keys ImGui owns to the focused canvas.
     wxWindow* const focus = wxWindow::FindFocus();
-    ImGuiWrapper* const imgui = wxGetApp().imgui();
-    if (focus != nullptr && imgui != nullptr && imgui->want_keyboard() && dynamic_cast<wxControl*>(focus) == nullptr)
+    if (chord.edits_text() && focus_is_text_field(focus))
+        return false;
+    if (const ImGuiWrapper* imgui = focused_canvas_imgui(focus); imgui != nullptr && imgui->owns_key(chord))
         return false;
 
     const std::optional<Shortcut> shortcut = wxGetApp().shortcuts().lookup(ShortcutContext::Global, chord);
@@ -1739,6 +1751,9 @@ void MainFrame::fit_tab_labels()
     for (size_t i = count - 1; i >= 1; --i) {
         int right = ScreenToClient(m_slice_option_btn->ClientToScreen({})).x;
         int left  = sizer->GetSize().GetWidth();
+        // The overflow button sits between the tab buttons and the side tools, so it is not free space.
+        if (const wxWindow* overflow = ctrl->GetOverflowButton())
+            left += overflow->GetSize().GetWidth();
         if (right - left - FromDIP(15) > 0) return;
         ctrl->SetCompact(i, true);
         m_tabpanel->Refresh();

src/slic3r/GUI/Notebook.hpp

@@ -57,6 +57,7 @@ public:
     // ORCA: a companion widget shown right after the tab buttons (before any side_tools), e.g.
     // an overflow indicator. Pass nullptr to remove it; ownership stays with the caller.
     void SetOverflowButton(wxWindow* button);
+    wxWindow* GetOverflowButton() const { return m_overflow_button; }
 
 private:
     wxFlexGridSizer*                m_buttons_sizer;

src/slic3r/GUI/OpenGLManager.cpp

@@ -427,6 +427,8 @@ wxGLContext* OpenGLManager::init_glcontext(wxGLCanvas& canvas, const std::pair<i
     return m_context;
 }
 
+static const char* const SCENE_CANVAS_NAME = "OrcaSceneCanvas";
+
 wxGLCanvas* OpenGLManager::create_wxglcanvas(wxWindow& parent)
 {
     int antialiasing_samples = 4;
@@ -470,12 +472,17 @@ wxGLCanvas* OpenGLManager::create_wxglcanvas(wxWindow& parent)
         attribList[samples_value_idx] = 0;
     }
 
-    wxGLCanvas* canvas = new wxGLCanvas(&parent, wxID_ANY, attribList, wxDefaultPosition, wxDefaultSize, wxWANTS_CHARS);
+    wxGLCanvas* canvas = new wxGLCanvas(&parent, wxID_ANY, attribList, wxDefaultPosition, wxDefaultSize, wxWANTS_CHARS, SCENE_CANVAS_NAME);
     // The GL canvas paints its entire surface, so background erasing is unnecessary.
     canvas->SetBackgroundStyle(wxBG_STYLE_PAINT);
     return canvas;
 }
 
+bool OpenGLManager::is_scene_canvas(const wxWindow* window)
+{
+    return window != nullptr && window->GetName() == SCENE_CANVAS_NAME;
+}
+
 void OpenGLManager::detect_multisample(int* attribList)
 {
     int wxVersion = wxMAJOR_VERSION * 10000 + wxMINOR_VERSION * 100 + wxRELEASE_NUMBER;

src/slic3r/GUI/OpenGLManager.hpp

@@ -101,6 +101,8 @@ public:
     static bool are_framebuffers_supported() { return (s_framebuffers_type != EFramebufferType::Unknown); }
     static EFramebufferType get_framebuffers_type() { return s_framebuffers_type; }
     static wxGLCanvas* create_wxglcanvas(wxWindow& parent);
+    // True for a canvas made by create_wxglcanvas(), the kind a GLCanvas3D draws its scene and ImGui into.
+    static bool is_scene_canvas(const wxWindow* window);
     static const GLInfo& get_gl_info() { return s_gl_info; }
     static bool force_power_of_two_textures() { return s_force_power_of_two_textures; }
 

src/slic3r/GUI/Plater.cpp

@@ -21178,7 +21178,12 @@ void Plater::print_job_finished(wxCommandEvent &evt)
     Slic3r::DeviceManager* dev = Slic3r::GUI::wxGetApp().getDeviceManager();
     if (!dev) return;
 
-    dev->set_selected_machine(evt.GetString().ToStdString());
+    const std::string dev_id = evt.GetString().ToStdString();
+    MachineObject* selected = dev->get_selected_machine();
+    // After a LAN print, the completion event reselects the same printer.
+    // Keep the active session while asynchronous status traffic may still be in flight.
+    if (!selected || selected->get_dev_id() != dev_id || selected->connection_type() != "lan")
+        dev->set_selected_machine(dev_id);
     p->main_frame->request_select_tab(TAB_ID_MONITOR);
     // Selects the status page on a built Device tab; one built by the switch starts there.
     MonitorPanel* curr_monitor = MonitorPanel::if_built();

src/slic3r/GUI/PublishSettingsDialog.cpp

@@ -2225,8 +2225,10 @@ void PublishSettingsDialog::refresh_tab_indicators()
             if (section.variant_switch != nullptr) {
                 const wxString& title = m_categories[section.categories[i]].title;
                 const wxString  text  = on ? title + wxString(" ") + wxString(wxUniChar(0x2022)) : title;
-                if (section.variant_switch->GetOptionText(static_cast<unsigned int>(i)) != text)
+                if (section.variant_switch->GetOptionText(static_cast<unsigned int>(i)) != text) {
                     section.variant_switch->SetOptionText(static_cast<unsigned int>(i), text);
+                    section.page->Layout();
+                }
             }
             any = any || on;
         }

src/slic3r/GUI/SelectMachine.cpp

@@ -4087,7 +4087,7 @@ void SelectMachineDialog::update_user_printer()
     {
         m_printer_last_select = "";
         update_select_layout(nullptr);
-        m_printer_box->GetPrinterComboBox()->SetTextLabel("");
+        m_printer_box->GetPrinterComboBox()->SetValue(_L("No available printers"));
     }
 
     BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << "for send task, current printer id =  " << m_printer_last_select << std::endl;

src/slic3r/GUI/Selection.cpp

@@ -474,17 +474,14 @@ void Selection::add_curr_plate()
     if (!m_valid)
         return;
 
+    std::vector<unsigned int> volume_idxs = get_volume_idxs_from_plate(wxGetApp().plater()->get_partplate_list().get_curr_plate_index());
+    if (volume_idxs.empty())
+        return;
+
     wxGetApp().plater()->take_snapshot(std::string("Selection-Add Curr Plate All!"));
     m_mode = Instance;
     clear();
-
-    PartPlate* plate = wxGetApp().plater()->get_partplate_list().get_curr_plate();
-    for (int obj_idx = 0; obj_idx < m_model->objects.size(); obj_idx++) {
-        if (plate && plate->contain_instance_totally(obj_idx, 0)) {
-            std::vector<unsigned int> volume_idxs = get_volume_idxs_from_object(obj_idx);
-            do_add_volumes(volume_idxs);
-        }
-    }
+    do_add_volumes(volume_idxs);
 
     update_type();
     this->set_bounding_boxes_dirty();
@@ -511,20 +508,14 @@ void Selection::remove_curr_plate()
     if (!m_valid)
         return;
 
-    PartPlate* plate = wxGetApp().plater()->get_partplate_list().get_curr_plate();
-    if (plate->empty())
+    std::vector<unsigned int> volume_idxs = get_volume_idxs_from_plate(wxGetApp().plater()->get_partplate_list().get_curr_plate_index());
+    if (volume_idxs.empty())
         return;
 
     wxGetApp().plater()->take_snapshot(std::string("Selection-Delete Curr Plate All"));
     m_mode = Instance;
     clear();
-
-    for (int obj_idx = 0; obj_idx < m_model->objects.size(); obj_idx++) {
-        if (plate && plate->contain_instance(obj_idx, 0)) {
-            std::vector<unsigned int> volume_idxs = get_volume_idxs_from_object(obj_idx);
-            do_add_volumes(volume_idxs);
-        }
-    }
+    do_add_volumes(volume_idxs);
 
     update_type();
     this->set_bounding_boxes_dirty();
@@ -2270,6 +2261,27 @@ std::vector<unsigned int> Selection::get_volume_idxs_from_volume(unsigned int ob
     return idxs;
 }
 
+std::vector<unsigned int> Selection::get_volume_idxs_from_plate(const int plate_idx) const
+{
+    PartPlate* plate = wxGetApp().plater()->get_partplate_list().get_plate(plate_idx);
+    std::vector<unsigned int> idxs;
+    if (!plate)
+        return idxs;
+
+    for (int obj_idx = 0; obj_idx < (int)m_model->objects.size(); obj_idx++) {
+        const ModelObject* obj = m_model->objects[obj_idx];
+        for (int inst_idx = 0; inst_idx < (int)obj->instances.size(); inst_idx++) {
+            // on this plate or overlapping it in some way (fully inside, oversized or partly outside)
+            if (plate->contain_instance(obj_idx, inst_idx) || plate->intersect_instance(obj_idx, inst_idx)) {
+                std::vector<unsigned int> inst_idxs = get_volume_idxs_from_instance(obj_idx, inst_idx);
+                idxs.insert(idxs.end(), inst_idxs.begin(), inst_idxs.end());
+            }
+        }
+    }
+
+    return idxs;
+}
+
 std::vector<unsigned int> Selection::get_missing_volume_idxs_from(const std::vector<unsigned int>& volume_idxs) const
 {
     std::vector<unsigned int> idxs;

src/slic3r/GUI/Selection.hpp

@@ -409,6 +409,8 @@ public:
     std::vector<unsigned int> get_volume_idxs_from_instance(unsigned int object_idx, unsigned int instance_idx) const;
     // returns the idx of the volume corresponding to the volume with the given idxs
     std::vector<unsigned int> get_volume_idxs_from_volume(unsigned int object_idx, unsigned int instance_idx, unsigned int volume_idx) const;
+    // returns the list of idxs of the volumes of all instances on the given plate or overlapping it. (fully inside, oversized or partly outside)
+    std::vector<unsigned int> get_volume_idxs_from_plate(const int plate_idx) const;
     // returns the list of idxs of the volumes contained in the selection but not in the given list
     std::vector<unsigned int> get_missing_volume_idxs_from(const std::vector<unsigned int>& volume_idxs) const;
     // returns the list of idxs of the volumes contained in the given list but not in the selection

src/slic3r/GUI/SendToPrinter.cpp

@@ -1229,7 +1229,7 @@ void SendToPrinterDialog::update_user_printer()
     }
     else {
         m_printer_last_select = "";
-        m_comboBox_printer->SetTextLabel("");
+        m_comboBox_printer->SetValue(_L("No available printers"));
     }
 
     BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << "for send task, current printer id =  " << m_printer_last_select << std::endl;

src/slic3r/GUI/SequentialPrintClearance.hpp

@@ -0,0 +1,63 @@
+#pragma once
+
+#include "libslic3r/BoundingBox.hpp"
+#include "libslic3r/ObjectID.hpp"
+#include "libslic3r/Polygon.hpp"
+
+#include <algorithm>
+#include <cstddef>
+#include <map>
+#include <utility>
+#include <vector>
+
+namespace Slic3r::GUI {
+
+struct SequentialClearanceInstance
+{
+    double      instance_height;
+    BoundingBox bounding_box;
+    Polygon     hull_polygon;
+    ObjectID    instance_id;
+};
+
+// PrintApply may group rotated copies in a different order from ModelObject::instances.
+// Reorder one object's instances only when validation has assigned all of them an order.
+inline void sort_sequential_clearance_instances(
+    std::vector<SequentialClearanceInstance>::iterator first, std::vector<SequentialClearanceInstance>::iterator last,
+    const std::map<ObjectID, int>& print_order)
+{
+    if (!std::all_of(first, last, [&print_order](const SequentialClearanceInstance& instance) {
+            const auto order = print_order.find(instance.instance_id);
+            return order != print_order.end() && order->second > 0;
+        }))
+        return;
+
+    std::stable_sort(first, last, [&print_order](const SequentialClearanceInstance& lhs, const SequentialClearanceInstance& rhs) {
+        return print_order.at(lhs.instance_id) < print_order.at(rhs.instance_id);
+    });
+}
+
+// Input follows object-list order with validated print order within each object.
+inline std::vector<std::pair<Polygon, float>> sequential_clearance_height_polygons(
+    const std::vector<SequentialClearanceInstance>& instances, double printable_height, double height_to_lid, double height_to_rod)
+{
+    std::vector<std::pair<Polygon, float>> height_polygons;
+    height_polygons.reserve(instances.size());
+    for (size_t k = 0; k < instances.size(); ++k) {
+        const auto& instance = instances[k];
+        double height = k + 1 == instances.size() ? printable_height : height_to_lid;
+        for (size_t i = k + 1; i < instances.size(); ++i) {
+            const auto& next_bbox = instances[i].bounding_box;
+            if (std::min(instance.bounding_box.max.y(), next_bbox.max.y()) >
+                std::max(instance.bounding_box.min.y(), next_bbox.min.y())) {
+                height = height_to_rod;
+                break;
+            }
+        }
+        if (height < instance.instance_height)
+            height_polygons.emplace_back(instance.hull_polygon, float(height));
+    }
+    return height_polygons;
+}
+
+} // namespace Slic3r::GUI

src/slic3r/GUI/TextureLibrary.cpp

@@ -1,6 +1,7 @@
 #include "TextureLibrary.hpp"
 
 #include <algorithm>
+#include <atomic>
 #include <boost/filesystem/operations.hpp>
 #include <cstddef>
 #include <boost/filesystem/directory.hpp>
@@ -21,6 +22,7 @@
 #include <boost/system/error_code.hpp>
 
 #include <vector>
+#include <wx/app.h>
 #include <wx/gdicmn.h>
 #include <utility>
 #include <wx/image.h>
@@ -36,6 +38,9 @@
 #include "slic3r/GUI/GUI_App.hpp"
 #include "slic3r/GUI/I18N.hpp"
 
+#include "slic3r/plugin/PluginFsUtils.hpp"
+#include "slic3r/plugin/host/PluginResourceTextures.hpp"
+
 namespace Slic3r::GUI {
 
 namespace {
@@ -50,7 +55,7 @@ bool is_image_file(const boost::filesystem::path &path)
     return ext == ".png" || ext == ".jpg" || ext == ".jpeg" || ext == ".bmp";
 }
 
-void scan_dir(const boost::filesystem::path &dir, bool is_user, std::vector<TextureLibraryEntry> &out)
+void scan_dir(const boost::filesystem::path &dir, TextureSource source, std::vector<TextureLibraryEntry> &out)
 {
     boost::system::error_code ec;
     if (!boost::filesystem::is_directory(dir, ec))
@@ -60,12 +65,43 @@ void scan_dir(const boost::filesystem::path &dir, bool is_user, std::vector<Text
     for (boost::filesystem::directory_iterator it(dir, ec), end; it != end && !ec; it.increment(ec)) {
         if (!boost::filesystem::is_regular_file(it->path(), ec) || !is_image_file(it->path()))
             continue;
-        out.push_back({ it->path().stem().string(), it->path().string(), is_user });
+        out.push_back({ it->path().stem().string(), it->path().string(), source });
     }
     std::sort(out.begin() + first, out.end(),
               [](const TextureLibraryEntry &a, const TextureLibraryEntry &b) { return a.name < b.name; });
 }
 
+// Appends every loaded pack's textures, ordered by the pack's display name and then by file name. Each
+// entry carries the contributing pack's display name, which the picker uses to group a pack's textures
+// into one section; a pack name is unique among loaded packs of this capability type, so the name both
+// groups the section and keeps its entries contiguous. A pack whose directory fails validation is
+// skipped, so one bad pack never hides the others.
+void scan_plugin_textures(std::vector<TextureLibraryEntry> &out)
+{
+    std::vector<TextureLibraryEntry> found;
+    for (const ResourceTextureEntry &pack : PluginResourceTextures::instance().entries()) {
+        std::string                    error;
+        const std::vector<std::string> files =
+            collect_resource_texture_files(pack.texture_dir, pack.plugin_root, error);
+        if (!error.empty()) {
+            BOOST_LOG_TRIVIAL(warning) << "Texture pack '" << pack.display_name << "' was skipped: " << error;
+            continue;
+        }
+        for (const std::string &file : files) {
+            const boost::filesystem::path path(file);
+            found.push_back({ path.stem().string(), file, TextureSource::Plugin, pack.display_name });
+        }
+    }
+
+    std::stable_sort(found.begin(), found.end(), [](const TextureLibraryEntry &a, const TextureLibraryEntry &b) {
+        if (a.pack_name != b.pack_name)
+            return a.pack_name < b.pack_name;
+        return a.name < b.name;
+    });
+    for (TextureLibraryEntry &entry : found)
+        out.push_back(std::move(entry));
+}
+
 // True if the image carries any colour at all, i.e. some pixel's channels are not all equal. A
 // photo saved as RGB but actually grey should still be stored as a grayscale PNG - it is a third of
 // the bytes, and the colour feature keys off has_color(), so storing a grey image as RGB would offer
@@ -187,27 +223,20 @@ std::vector<unsigned char> read_file_bytes(const std::string &path)
     return std::vector<unsigned char>(std::istreambuf_iterator<char>(ifs), std::istreambuf_iterator<char>());
 }
 
-// True if these bytes are a PNG libslic3r can decode, i.e. can be stored on a layer as-is. Mirrors
-// exactly what decode_height_texture() accepts: 8-bit grayscale, or 8-bit colour (whose luminance is
-// the height and whose RGB is available to colour the model). Anything else is converted on load.
+// True if decode_height_texture() can read these bytes, so they can be stored on a layer as-is.
+// Anything else is converted on load.
 bool is_supported_height_map(const std::vector<unsigned char> &bytes)
 {
-    if (bytes.empty())
-        return false;
-    const png::ReadBuf rbuf{ bytes.data(), bytes.size() };
-    if (!png::is_png(rbuf))
-        return false;
-    png::ImageGreyscale gray;
-    if (png::decode_png(rbuf, gray) && gray.cols > 0 && gray.rows > 0)
-        return true;
-    png::ImageColorscale color;
-    return png::decode_colored_png(rbuf, color) && color.cols > 0 && color.rows > 0 &&
-           color.bytes_per_pixel >= 3 &&
-           color.buf.size() == color.cols * color.rows * size_t(color.bytes_per_pixel);
+    return !bytes.empty() && png::is_decodable_8bit_png(png::ReadBuf{ bytes.data(), bytes.size() });
 }
 
 std::vector<TextureLibraryEntry> g_library;
 bool                             g_library_scanned = false;
+// The generation g_library was last built from, so texture_library() can rescan after a pack change.
+uint64_t g_library_scan_generation = 0;
+
+// Bumped by plugin callbacks, read by the GUI frame. Atomic so a read never races a write.
+std::atomic<uint64_t> g_library_generation{ 0 };
 
 // Writes `bytes` into the user's own texture folder as `stem`.png, uniquified so an existing texture -
 // shipped-name collision, or a second edit of the same source - is never overwritten. Returns the new
@@ -255,6 +284,8 @@ const size_t      RECENT_MAX     = 200;
 std::vector<std::string> recent_texture_names()
 {
     std::vector<std::string> names;
+    if (wxTheApp == nullptr) // headless or shutting down: there is no app config to read
+        return names;
     if (wxGetApp().app_config == nullptr)
         return names;
     const std::string value = wxGetApp().app_config->get(RECENT_SECTION, RECENT_KEY);
@@ -269,6 +300,8 @@ std::vector<std::string> recent_texture_names()
 
 void store_recent_texture_names(std::vector<std::string> names)
 {
+    if (wxTheApp == nullptr) // headless or shutting down: there is no app config to write
+        return;
     if (wxGetApp().app_config == nullptr)
         return;
     if (names.size() > RECENT_MAX)
@@ -279,8 +312,9 @@ void store_recent_texture_names(std::vector<std::string> names)
     wxGetApp().app_config->set(RECENT_SECTION, RECENT_KEY, value);
 }
 
-// Reorders the user's entries (the tail of `library`) by recent use. Stable, so textures never used keep
-// the name order scan_dir() gave them, after every used one.
+// Reorders the user's entries by recent use. Stable, so textures never used keep the name order
+// scan_dir() gave them, after every used one. Only the user's own range is touched: shipped and pack
+// entries must keep the order their scans produced.
 void sort_user_textures(std::vector<TextureLibraryEntry> &library)
 {
     const std::vector<std::string>       names = recent_texture_names();
@@ -291,8 +325,11 @@ void sort_user_textures(std::vector<TextureLibraryEntry> &library)
         const auto it = rank.find(boost::filesystem::path(e.path).filename().string());
         return it == rank.end() ? std::numeric_limits<int>::max() : it->second;
     };
-    const auto first_user = std::find_if(library.begin(), library.end(), [](const TextureLibraryEntry &e) { return e.is_user; });
-    std::stable_sort(first_user, library.end(),
+    const auto first_user = std::find_if(library.begin(), library.end(),
+                                         [](const TextureLibraryEntry &e) { return e.source == TextureSource::User; });
+    const auto user_end   = std::find_if(first_user, library.end(),
+                                         [](const TextureLibraryEntry &e) { return e.source != TextureSource::User; });
+    std::stable_sort(first_user, user_end,
                      [&rank_of](const TextureLibraryEntry &a, const TextureLibraryEntry &b) { return rank_of(a) < rank_of(b); });
 }
 
@@ -311,6 +348,16 @@ bool in_user_texture_dir(const std::string &path)
 
 } // namespace
 
+uint64_t texture_library_generation()
+{
+    return g_library_generation.load();
+}
+
+void bump_texture_library_generation()
+{
+    g_library_generation.fetch_add(1);
+}
+
 std::string user_texture_dir()
 {
     const boost::filesystem::path dir = boost::filesystem::path(Slic3r::data_dir()) / "textures" / "displacement";
@@ -325,17 +372,20 @@ std::string user_texture_dir()
 
 const std::vector<TextureLibraryEntry> &texture_library(bool force_rescan)
 {
-    if (g_library_scanned && !force_rescan)
+    const uint64_t generation = texture_library_generation();
+    if (g_library_scanned && !force_rescan && generation == g_library_scan_generation)
         return g_library;
 
     g_library.clear();
-    scan_dir(boost::filesystem::path(Slic3r::resources_dir()) / "textures" / "displacement", false, g_library);
+    scan_dir(boost::filesystem::path(Slic3r::resources_dir()) / "textures" / "displacement", TextureSource::Shipped, g_library);
     const std::string user_dir = user_texture_dir();
     if (!user_dir.empty())
-        scan_dir(boost::filesystem::path(user_dir), true, g_library);
+        scan_dir(boost::filesystem::path(user_dir), TextureSource::User, g_library);
     sort_user_textures(g_library);
+    scan_plugin_textures(g_library);
 
-    g_library_scanned = true;
+    g_library_scan_generation = generation;
+    g_library_scanned          = true;
     return g_library;
 }
 

src/slic3r/GUI/TextureLibrary.hpp

@@ -1,6 +1,7 @@
 #ifndef slic3r_TextureLibrary_hpp_
 #define slic3r_TextureLibrary_hpp_
 
+#include <cstdint>
 #include <memory>
 #include <optional>
 #include <string>
@@ -10,26 +11,45 @@
 
 namespace Slic3r::GUI {
 
-// One selectable height-map texture in the texture-displacement gizmo's texture picker.
+// Where a library texture came from. The picker lists each source under its own heading.
+enum class TextureSource { Shipped, User, Plugin };
+
+// One selectable height-map texture in the texture-displacement gizmo's texture picker. A texture that
+// came from a plugin pack also carries the provenance the picker groups its sections by.
 struct TextureLibraryEntry
 {
-    std::string name;    // display name (the file's stem, e.g. "Wood Grain")
-    std::string path;    // absolute path on disk
-    bool        is_user; // imported by the user, as opposed to shipped with OrcaSlicer
+    std::string   name;   // display name (the file's stem, e.g. "Wood Grain")
+    std::string   path;   // absolute path on disk
+    TextureSource source; // which of the three sources it came from
+
+    std::string pack_name; // contributing pack's display name; empty for Shipped and User
 };
 
-// Every available height-map texture: the ones shipped in resources/textures/displacement first, sorted
-// by name, then the user's own from <data_dir>/textures/displacement - most recently used first (see
-// touch_user_texture()), then any never used, by name.
+// Every available height-map texture, in the order the picker lists them: the ones shipped in
+// resources/textures/displacement first, by name; then the user's own from <data_dir>/textures/displacement,
+// most recently used first (see touch_user_texture()) and the rest by name; then the loaded texture
+// packs, ordered by pack display name and then by file name.
 //
-// The two live in separate directories deliberately: an app update replaces the resources tree
-// wholesale, so anything the user imported has to sit somewhere that update can never overwrite or
-// delete. `is_user` is what the picker uses to show them under separate headings.
+// The shipped and user textures live in separate directories deliberately: an app update replaces the
+// resources tree wholesale, so anything the user imported has to sit somewhere that update can never
+// overwrite or delete. Pack textures are read-only like the shipped ones. Every texture carries its
+// `source`; a pack texture also carries `pack_name`, and the picker groups pack textures into one
+// collapsible section per pack name. A pack's name is unique among loaded packs of this capability type -
+// the loader refuses a collision with "Capability collision for type ... and name ...", see
+// PluginManager::check_registry_locked (PluginManager.cpp:211-225) - so the name on its own identifies a
+// section and keeps that pack's entries contiguous.
 //
 // Scanned once and cached. Pass force_rescan after an import, or to pick up a file the user dropped
-// into either folder by hand while the app was running.
+// into either folder by hand while the app was running. A rescan also happens on its own when the pack
+// registry changes, which is what texture_library_generation() tracks.
 const std::vector<TextureLibraryEntry> &texture_library(bool force_rescan = false);
 
+// Monotonic counter, bumped whenever the set of loaded texture packs changes. The GUI reads it to
+// decide whether texture_library() must rescan, and plugin callbacks bump it. Safe to read from any
+// thread at any time.
+uint64_t texture_library_generation();
+void     bump_texture_library_generation();
+
 // Moves one of the user's own textures to the front of the recently-used order texture_library() lists
 // them in, and stores that order in the app config so it survives a restart. No-op for anything that is
 // not in user_texture_dir().

src/slic3r/GUI/TroubleshootDialog.cpp

@@ -74,6 +74,7 @@
 #endif
 
 #ifdef __LINUX__
+#include "LinuxDisplayBackend.hpp"
 #include <wx/textfile.h>
 #include <wx/tokenzr.h>
 #include <cstdlib>
@@ -201,7 +202,11 @@ TroubleshootDialog::TroubleshootDialog()
             return std::vector<wxString>{GetOStype()};
         return std::vector<wxString>{
             GetOSinfo(),
+#ifdef __LINUX__
+            GetPackageType() + GetAppDisplayBackend(),
+#else
             GetPackageType(),
+#endif
             GetCPUinfo(),
             GetRAMinfo() + " RAM",
             GetGPUinfo(),
@@ -434,10 +439,15 @@ wxString TroubleshootDialog::GetTimestamp()
 
 wxString TroubleshootDialog::GetSysInfoAll()
 {
+    wxString package = GetPackageType();
+#ifdef __LINUX__
+    package += GetAppDisplayBackend();
+#endif
+
     wxString info;
     info += "Version   :  " + wxString(SoftFever_VERSION) + "\n"
           + "Build     :  " + wxString(build_commit_label) + "\n"
-          + "Package   :  " + GetPackageType() + "\n"
+          + "Package   :  " + package + "\n"
           + "Platform  :  " + GetOSinfo()      + "\n"
           + "Processor :  " + GetCPUinfo() + "\n"
           + "Memory    :  " + GetRAMinfo() + "RAM" + "\n"
@@ -751,6 +761,18 @@ wxString TroubleshootDialog::GetLinuxDisplayServer()
 
     return "";
 }
+
+wxString TroubleshootDialog::GetAppDisplayBackend()
+{
+    // Display backend actually used by the app (GDK), not the session type
+    wxString display;
+    switch (get_linux_display_backend()) {
+        case LinuxDisplayBackend::X11:     display = "X11";     break;
+        case LinuxDisplayBackend::Wayland: display = "Wayland"; break;
+        default: break;
+    }
+    return display.IsEmpty() ? "" : (" (" + display + ")"); // spacing included here to prevent non centered text
+}
 #endif
 
 wxString TroubleshootDialog::GetPackageType()