Demo

* fix: crash in Measure tool when a plain edge is the first selection

The SPHERE_2 gripper raycaster called get_feature_offset() on
.first.feature instead of .second.feature (copy-pasted from the SPHERE_1
block). Plain planar-border edges store no extra point, so the Edge
branch dereferenced an empty optional behind a release-stripped assert,
aborting on Flatpak and undefined behavior elsewhere.

Point the SPHERE_2 raycaster at .second.feature and fall the Edge branch
back to the edge midpoint.

Fixes #14018

.github/workflows/auto-close-duplicates.yml

@@ -15,7 +15,7 @@ jobs:
 
     steps:
       - name: Checkout repository
-        uses: actions/checkout@v6
+        uses: actions/checkout@v7
 
       - name: Setup Bun
         uses: oven-sh/setup-bun@v2

.github/workflows/backfill-duplicate-comments.yml

@@ -29,7 +29,7 @@ jobs:
 
     steps:
       - name: Checkout repository
-        uses: actions/checkout@v6
+        uses: actions/checkout@v7
       
       - name: Setup Bun
         uses: oven-sh/setup-bun@v2

.github/workflows/build_all.yml

@@ -131,7 +131,7 @@ jobs:
     if: ${{ !cancelled() && success() }}
     steps:
       - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v7
         with:
           sparse-checkout: |
             .github
@@ -204,7 +204,7 @@ jobs:
     - name: "Remove unneeded stuff to free disk space"
       run:
         rm -rf /usr/local/lib/android/* /usr/share/dotnet/* /opt/ghc1/* "/usr/local/share/boost1/*" /opt/hostedtoolcache1/*
-    - uses: actions/checkout@v6
+    - uses: actions/checkout@v7
     - name: Get the version and date
       run: |
         ver_pure=$(grep 'set(SoftFever_VERSION' version.inc | cut -d '"' -f2)
@@ -223,14 +223,14 @@ jobs:
     # Manage flatpak-builder cache externally so PRs restore but never upload
     - name: Restore flatpak-builder cache
       if: github.event_name == 'pull_request'
-      uses: actions/cache/restore@v5
+      uses: actions/cache/restore@v6
       with:
         path: .flatpak-builder
         key: flatpak-builder-${{ matrix.variant.arch }}-${{ github.event.pull_request.base.sha }}
         restore-keys: flatpak-builder-${{ matrix.variant.arch }}-
     - name: Save/restore flatpak-builder cache
       if: github.event_name != 'pull_request'
-      uses: actions/cache@v5
+      uses: actions/cache@v6
       with:
         path: .flatpak-builder
         key: flatpak-builder-${{ matrix.variant.arch }}-${{ github.sha }}

.github/workflows/build_check_cache.yml

@@ -26,7 +26,7 @@ jobs:
       valid-cache: ${{ steps.cache_deps.outputs.cache-hit }}
     steps:
       - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v7
         with:
           lfs: 'false'
         
@@ -46,7 +46,7 @@ jobs:
             
       - name: load cache
         id: cache_deps
-        uses: actions/cache@v5
+        uses: actions/cache@v6
         with:
           path: ${{ steps.set_outputs.outputs.cache-path }}
           key: ${{ steps.set_outputs.outputs.cache-key }}

.github/workflows/build_deps.yml

@@ -34,12 +34,12 @@ jobs:
 
       # Setup the environment
       - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v7
         with:
           lfs: 'false'
 
       - name: load cached deps
-        uses: actions/cache@v5
+        uses: actions/cache@v6
         with:
           path: ${{ inputs.cache-path }}
           key: ${{ inputs.cache-key }}

.github/workflows/build_orca.yml

@@ -37,13 +37,13 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v7
         with:
           lfs: 'false'
 
       - name: load cached deps
         if: ${{ !(runner.os == 'macOS' && inputs.macos-combine-only) }}
-        uses: actions/cache@v5
+        uses: actions/cache@v6
         with:
           path: ${{ inputs.cache-path }}
           key: ${{ inputs.cache-key }}

.github/workflows/check_locale.yml

@@ -14,7 +14,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:  
       - name: Checkout repository
-        uses: actions/checkout@v6
+        uses: actions/checkout@v7
 
       - name: Install gettext 
         run: |

.github/workflows/check_profiles.yml

@@ -24,7 +24,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout repository
-        uses: actions/checkout@v6
+        uses: actions/checkout@v7
 
       - name: Run extra JSON check
         id: extra_json_check
@@ -41,7 +41,7 @@ jobs:
           curl -L -o OrcaSlicer_profile_validator https://github.com/OrcaSlicer/OrcaSlicer/releases/download/nightly-builds/OrcaSlicer_profile_validator_Linux_Ubuntu2404_nightly
           chmod +x ./OrcaSlicer_profile_validator
 
-      # Validate all system profiles.
+      # validate profiles
       - name: validate system profiles
         id: validate_system
         continue-on-error: true
@@ -57,6 +57,20 @@ jobs:
           set +e
           ./OrcaSlicer_profile_validator -p ${{ github.workspace }}/resources/profiles -l 2 -v BBL -f 2>&1 | tee ${{ runner.temp }}/validate_filament_subtypes.log
           exit ${PIPESTATUS[0]}
+      # Flag inherits/compatible_printers/compatible_prints references that point at a deleted or
+      # renamed preset. Opt-in per vendor for now (via -r); enabled for BBL and Qidi until other
+      # vendors' profiles are cleaned up. Runs before the custom-preset injection below.
+      - name: validate preset references for BBL and Qidi profiles
+        id: validate_preset_references
+        continue-on-error: true
+        run: |
+          set +e
+          rc=0
+          for v in BBL Qidi; do
+            ./OrcaSlicer_profile_validator -p ${{ github.workspace }}/resources/profiles -l 2 -v "$v" -r 2>&1 | tee -a ${{ runner.temp }}/validate_preset_references.log
+            [ ${PIPESTATUS[0]} -ne 0 ] && rc=1
+          done
+          exit $rc
 
       - name: validate custom presets
         id: validate_custom
@@ -166,7 +180,7 @@ jobs:
           echo "${{ github.event.pull_request.number }}" > ${{ runner.temp }}/profile-check-results/pr_number.txt
 
       - name: Prepare comment artifact
-        if: ${{ always() && github.event_name == 'pull_request' && (steps.extra_json_check.outcome == 'failure' || steps.validate_system.outcome == 'failure' || steps.validate_filament_subtypes.outcome == 'failure' || steps.validate_custom.outcome == 'failure') }}
+        if: ${{ always() && github.event_name == 'pull_request' && (steps.extra_json_check.outcome == 'failure' || steps.validate_system.outcome == 'failure' || steps.validate_filament_subtypes.outcome == 'failure' || steps.validate_preset_references.outcome == 'failure' || steps.validate_custom.outcome == 'failure') }}
         run: |
           {
             # Marker matched by check_profiles_comment.yml to delete prior comments.
@@ -201,6 +215,15 @@ jobs:
               echo ""
             fi
 
+            if [ "${{ steps.validate_preset_references.outcome }}" = "failure" ]; then
+              echo "### BBL/Qidi Preset Reference Validation Failed"
+              echo ""
+              echo '```'
+              head -c 30000 ${{ runner.temp }}/validate_preset_references.log || echo "No output captured"
+              echo '```'
+              echo ""
+            fi
+
             if [ "${{ steps.validate_custom.outcome }}" = "failure" ]; then
               echo "### Custom Preset Validation Failed"
               echo ""
@@ -223,7 +246,7 @@ jobs:
           retention-days: 1
 
       - name: Fail if any check failed
-        if: ${{ always() && (steps.extra_json_check.outcome == 'failure' || steps.validate_system.outcome == 'failure' || steps.validate_filament_subtypes.outcome == 'failure' || steps.validate_custom.outcome == 'failure') }}
+        if: ${{ always() && (steps.extra_json_check.outcome == 'failure' || steps.validate_system.outcome == 'failure' || steps.validate_filament_subtypes.outcome == 'failure' || steps.validate_preset_references.outcome == 'failure' || steps.validate_custom.outcome == 'failure') }}
         run: |
           echo "One or more profile checks failed. See above for details."
           exit 1

.github/workflows/dedupe-issues.yml

@@ -20,7 +20,7 @@ jobs:
 
     steps:
       - name: Checkout repository
-        uses: actions/checkout@v6
+        uses: actions/checkout@v7
 
       - name: Run Claude Code slash command
         uses: anthropics/claude-code-base-action@beta

.github/workflows/doxygen-docs.yml

@@ -26,7 +26,7 @@ jobs:
           remove-existing-swap-files: true
 
       - name: Checkout repository
-        uses: actions/checkout@v6
+        uses: actions/checkout@v7
 
       - name: Install Doxygen and Graphviz
         run: |

.github/workflows/publish_release.yml

@@ -17,7 +17,7 @@ on:
         required: true
         type: string
       tag:
-        description: 'Tag of the draft release to upload to (e.g. v2.4.0)'
+        description: 'Tag of the draft release to upload to (e.g. v2.4.0-beta)'
         required: true
         type: string
 

.github/workflows/shellcheck.yml

@@ -21,7 +21,7 @@ jobs:
     steps:
       - name: Cache shellcheck download
         id: cache-shellcheck-v0_11
-        uses: actions/cache@v5
+        uses: actions/cache@v6
         with:
           path: ~/shellcheck
           key: ${{ runner.os }}-shellcheck-v0_11
@@ -36,7 +36,7 @@ jobs:
           tar -xvf ~/sc.tar.xz -C ~
           mv ~/shellcheck-"${INPUT_VERSION}"/shellcheck ~/shellcheck
 
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v7
         with:
           fetch-depth: 1
 

.github/workflows/update-translation.yml

@@ -10,7 +10,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:  
       - name: Checkout repository
-        uses: actions/checkout@v6
+        uses: actions/checkout@v7
 
       - name: Setup Python
         uses: actions/setup-python@v6

README.md

@@ -1,237 +1 @@
-<div align="center">
-
-<picture>
-  <img alt="OrcaSlicer logo" src="resources/images/OrcaSlicer.png" width="15%" height="15%">
-</picture>
-
-<a href="https://trendshift.io/repositories/15552" target="_blank"><img src="https://trendshift.io/api/badge/repositories/15552" alt="OrcaSlicer%2FOrcaSlicer | Trendshift" style="width: 250px; height: 55px;" width="250" height="55"/></a>
-
-[![GitHub Repo stars](https://img.shields.io/github/stars/OrcaSlicer/OrcaSlicer)](https://github.com/OrcaSlicer/OrcaSlicer/stargazers) [![Build all](https://github.com/OrcaSlicer/OrcaSlicer/actions/workflows/build_all.yml/badge.svg?branch=main)](https://github.com/OrcaSlicer/OrcaSlicer/actions/workflows/build_all.yml)
-
-OrcaSlicer: an open source Next-Gen Slicing Software for Precision 3D Prints.  
-Optimize your prints with ultra-fast slicing, intelligent support generation, and seamless printer compatibility—engineered for perfection.
-<h3>
-
-# Official links and community
-
-#### Official Website:
-
-<a href="https://www.orcaslicer.com/" style="font-size:2em;">OrcaSlicer.com</a>
-
-#### Github Repository:
-
-<a href="https://github.com/OrcaSlicer/OrcaSlicer"><img src="https://img.shields.io/badge/OrcaSlicer-181717?style=flat&logo=github&logoColor=white" width="200" alt="GitHub Logo"/> </a>
-
-#### Follow us:
-
-<a href="https://twitter.com/real_OrcaSlicer"><img src="https://img.shields.io/badge/real__OrcaSlicer-000000?style=flat&logo=x&logoColor=white" width="200" alt="X Logo"/> </a>  
-<a href="https://www.youtube.com/@OfficialOrcaSlicer"><img src="https://img.shields.io/badge/OfficialOrcaSlicer-FF0000?style=flat&logo=youtube&logoColor=white" width="200" alt="YouTube Logo"/> </a>
-
-#### Join our Discord community:
-
-<a href="https://discord.gg/P4VE9UY9gJ"><img src="https://img.shields.io/badge/-Discord-5865F2?style=flat&logo=discord&logoColor=fff" width="200" alt="discord logo"/> </a>
-
-<table border="2" style="border-color: #ffa500; background-color:rgb(232, 220, 180); color: #856404;">
-<tr>
-<td>
-<strong>⚠️ CAUTION:</strong><br>
-Several clickbait and malicious websites, such as <b>orca-slicer[.]com</b> and <b>orcaslicer[.]net</b>, are pretending to be the official OrcaSlicer site. These sites may redirect you to dangerous downloads or contain misleading information.<br>
-<b>Our only official website is <a href="https://www.orcaslicer.com/">www.orcaslicer.com</a>.</b><br><br>
-If you come across any of these in search results, please <b>report them</b> as unsafe or phishing to help keep the community secure with:<br>
- - <a href="https://safebrowsing.google.com/safebrowsing/report_phish/">Google Safe Browsing</a><br>
- - <a href="https://www.microsoft.com/en-us/wdsi/support/report-unsafe-site">Microsoft Security Intelligence</a><br>
- - <a href="https://ipthreat.net/tools/reportphishing">IPThreat</a>
-</td>
-</tr>
-</table>
-
-</div>
-
-# Main features
-
-- **[Advanced Calibration Tools](https://www.orcaslicer.com/wiki/calibration_guide)**  
-  Comprehensive suite: temperature towers, flow rate, retraction & more for optimal performance.
-- **[Precise Wall](https://www.orcaslicer.com/wiki/quality_settings_precision#precise-wall) and [Seam Control](https://www.orcaslicer.com/wiki/quality_settings_seam)**  
-  Adjust outer wall spacing and apply scarf seams to enhance print accuracy.
-- **[Sandwich Mode](https://www.orcaslicer.com/wiki/quality_settings_wall_and_surfaces#innerouterinner) and [Polyholes](https://www.orcaslicer.com/wiki/quality_settings_precision#polyholes) Support**  
-  Use varied infill [patterns](https://www.orcaslicer.com/wiki/strength_settings_patterns) and accurate hole shapes for improved clarity.
-- **[Overhang](https://www.orcaslicer.com/wiki/quality_settings_overhangs) and [Support Optimization](https://www.orcaslicer.com/wiki#support-settings)**  
-  Modify geometry for printable overhangs with precise support placement.
-- **[Granular Controls and Customization](https://www.orcaslicer.com/wiki#process-settings)**  
-  Fine-tune print speed, layer height, pressure, and temperature with precision.
-- **Network Printer Support**  
-  Seamless integration with Klipper, PrusaLink, and OctoPrint for remote control.
-- **[Mouse Ear Brims](https://www.orcaslicer.com/wiki/others_settings_brim) & [Adaptive Bed Mesh](https://www.orcaslicer.com/wiki/printer_basic_information_adaptive_bed_mesh)**  
-  Automatic brims and adaptive mesh calibration ensure consistent adhesion.
-- **User-Friendly Interface**  
-  Intuitive drag-and-drop design with pre-made profiles for popular printers.
-- **[Open-Source](https://github.com/OrcaSlicer/OrcaSlicer) & [Community Driven](https://discord.gg/P4VE9UY9gJ)**  
-  Regular updates fueled by continuous community contributions.
-- **Wide Printer Compatibility**  
-  Supports a broad range of printers: Bambu Lab, Prusa, Creality, Voron, and more.
-- Additional features can be found in the [change notes](https://github.com/OrcaSlicer/OrcaSlicer/releases/).
-
-# Wiki
-
-The [wiki](https://www.orcaslicer.com/wiki) aims to provide a detailed explanation of the slicer settings, including how to maximize their use and how to calibrate and set up your printer.
-
-- **[Access the wiki here](https://www.orcaslicer.com/wiki)**
-- **[Contribute to the wiki](https://www.orcaslicer.com/wiki/how_to_wiki)**
-
-# Download
-
-## Stable Release
-
-📥 **[Download the Latest Stable Release](https://github.com/OrcaSlicer/OrcaSlicer/releases/latest)**  
-Visit our GitHub Releases page for the latest stable version of OrcaSlicer, recommended for most users.
-
-## Nightly Builds
-
-🌙 **[Download the Latest Nightly Build](https://github.com/OrcaSlicer/OrcaSlicer/releases/tag/nightly-builds)**  
-Explore the latest developments in OrcaSlicer with our nightly builds. Feedback on these versions is highly appreciated.
-
-# How to install
-
-## Windows
-
-Download the **Windows Installer exe**  for your preferred version from the [releases page](https://github.com/OrcaSlicer/OrcaSlicer/releases).
-
-- *For convenience there is also a portable build available.*
-    <details>
-    <summary>Troubleshooting</summary>
-
-  - *If you have troubles to run the build, you might need to install following runtimes:*
-  - [MicrosoftEdgeWebView2RuntimeInstallerX64](https://github.com/OrcaSlicer/OrcaSlicer/releases/download/v1.0.10-sf2/MicrosoftEdgeWebView2RuntimeInstallerX64.exe)
-    - [Details of this runtime](https://aka.ms/webview2)
-    - [Alternative Download Link Hosted by Microsoft](https://go.microsoft.com/fwlink/p/?LinkId=2124703)
-  - [vcredist2019_x64](https://github.com/OrcaSlicer/OrcaSlicer/releases/download/v1.0.10-sf2/vcredist2019_x64.exe)
-    - [Alternative Download Link Hosted by Microsoft](https://aka.ms/vs/17/release/vc_redist.x64.exe)
-    - This file may already be available on your computer if you've installed visual studio.  Check the following location: `%VCINSTALLDIR%Redist\MSVC\v142`
-    </details>
-
-Windows Package Manager
-
-```shell
-winget install --id=SoftFever.OrcaSlicer -e
-```
-
-## Mac
-
-1. Download the DMG for your computer: `arm64` version for Apple Silicon and `x86_64` for Intel CPU.
-2. Drag OrcaSlicer.app to Application folder.
-3. *If you want to run a build from a PR, you also need to follow the instructions below:*
-
-    <details>
-    <summary>Quarantine</summary>
-
-    - Option 1 (You only need to do this once. After that the app can be opened normally.):
-      - Step 1: Hold _cmd_ and right click the app, from the context menu choose **Open**.
-      - Step 2: A warning window will pop up, click _Open_
-
-    - Option 2:
-      Execute this command in terminal:
-
-      ```shell
-      xattr -dr com.apple.quarantine /Applications/OrcaSlicer.app
-      ```
-
-    - Option 3:
-        - Step 1: open the app, a warning window will pop up  
-            ![mac_cant_open](./SoftFever_doc/mac_cant_open.png)
-        - Step 2: in `System Settings` -> `Privacy & Security`, click `Open Anyway`:  
-            ![mac_security_setting](./SoftFever_doc/mac_security_setting.png)
-    </details>
-
-## Linux
-
-### Flathub (Recommended)
-
-OrcaSlicer is available through FlatHub:
-
-<a href='https://flathub.org/apps/com.orcaslicer.OrcaSlicer'><img width='240' alt='Download on Flathub' src='https://dl.flathub.org/assets/badges/flathub-badge-en.png'/></a>
-
-Install from the command line:
-
-```shell
-flatpak install flathub com.orcaslicer.OrcaSlicer
-flatpak run com.orcaslicer.OrcaSlicer
-```
-
-It can also be installed through graphical software managers (KDE Discover, GNOME Software, etc.) when Flathub is enabled. Search for **OrcaSlicer** in your software center.
-
-### AppImage
-
-AppImages are published for both **x86_64** and **aarch64** (ARM64). Pick the file matching your CPU — the ARM64 build has `aarch64` in its name (e.g. `OrcaSlicer_Linux_AppImage_Ubuntu2404_aarch64_*.AppImage`).
-
- 1. Download App image from the [releases page](https://github.com/OrcaSlicer/OrcaSlicer/releases).
- 2. Double click the downloaded file to run it.
-
- 3. If you run into trouble executing it, try this command in the terminal:
-    `chmod +x /path_to_appimage/OrcaSlicer_Linux.AppImage`
-
-# How to Compile
-
-All updated build instructions for Windows, macOS, and Linux are now available on the official [OrcaSlicer Wiki - How to build](https://www.orcaslicer.com/wiki/how_to_build) page.
-
-Please refer to the wiki to ensure you're following the latest and most accurate steps for your platform.
-
-# Klipper Note
-
-If you're running Klipper, it's recommended to add the following configuration to your `printer.cfg` file.
-
-```gcode
-# Enable object exclusion
-[exclude_object]
-
-# Enable arcs support
-[gcode_arcs]
-resolution: 0.1
-```
-
-# Supports
-
-**OrcaSlicer** is an open-source project and I'm deeply grateful to all my sponsors and backers.  
-Their generous support enables me to purchase filaments and other essential 3D printing materials for the project.  
-Thank you! :)
-
-## Sponsors
-
-<table>
-<tr>
-<td>
-<a href="https://qidi3d.com/" style="display:inline-block; border-radius:8px; background:#fff;">
-  <img src="SoftFever_doc\sponsor_logos\QIDI.png" alt="QIDI" width="100" height="100">
-</a>
-</td>
-<td>
-<a href="https://bigtree-tech.com/" style="display:inline-block; border-radius:8px; background:#222;">
-    <img src="SoftFever_doc\sponsor_logos\BigTreeTech.png" alt="BIGTREE TECH" width="100" height="100">
-</a>
-</td>
-</tr>
-</table>
-
-## Backers:
-
-**Ko-fi supporters** ☕: [Backers list](https://github.com/user-attachments/files/16147016/Supporters_638561417699952499.csv)
-
-## Support me
-
-<a href="https://github.com/sponsors/SoftFever"><img src="https://img.shields.io/badge/GitHub%20Sponsors-30363D?style=flat&logo=GitHub-Sponsors&logoColor=EA4AAA" height="50"></a>  
-<a href="https://ko-fi.com/G2G5IP3CP"><img src="https://img.shields.io/badge/Support_me_on_Ko--fi-FF5E5B?style=flat&logo=ko-fi&logoColor=white" height="50"></a>  
-<a href="https://paypal.me/softfever3d"><img src="https://img.shields.io/badge/PayPal-003087?style=flat&logo=paypal&logoColor=fff" height="50"></a>
-
-## Some Background
-
-Open-source slicing has always been built on a tradition of collaboration and attribution. [Slic3r](https://github.com/Slic3r/Slic3r), created by Alessandro Ranellucci and the RepRap community, laid the foundation. [PrusaSlicer](https://github.com/prusa3d/PrusaSlicer) by Prusa Research built on Slic3r and acknowledged that heritage. [Bambu Studio](https://github.com/bambulab/BambuStudio) in turn forked from PrusaSlicer, and [SuperSlicer](https://github.com/supermerill/SuperSlicer) by @supermerill extended PrusaSlicer with community-driven enhancements. Each project carried the work of its predecessors forward, crediting those who came before.
-
-OrcaSlicer began in that same spirit, drawing from BambuStudio, PrusaSlicer, and ideas inspired by CuraSlicer and SuperSlicer. But it has since grown far beyond its origins. Through relentless innovation — introducing advanced calibration tools, precise wall and seam control, tree supports, adaptive slicing, and hundreds of other features — OrcaSlicer has become the most widely used and actively developed open-source slicer in the 3D printing community. Many of its innovations have been adopted by other slicers, making it a driving force for the entire industry.
-
-The OrcaSlicer logo was designed by community member [Justin Levine](https://github.com/jal-co).
-
-# License
-
-- **OrcaSlicer** is licensed under the GNU Affero General Public License, version 3.
-- The **GNU Affero General Public License**, version 3 ensures that if you use any part of this software in any way (even behind a web server), your software must be released under the same license.
-- OrcaSlicer includes a **pressure advance calibration pattern test** adapted from Andrew Ellis' generator, which is licensed under GNU General Public License, version 3. Ellis' generator is itself adapted from a generator developed by Sineos for Marlin, which is licensed under GNU General Public License, version 3.
-- The **Bambu networking plugin** is based on non-free libraries from BambuLab. It is optional to the OrcaSlicer and provides extended functionalities for Bambulab printer users.
+Remove this branch and PR later

deps/Boost/Boost.cmake

@@ -25,6 +25,7 @@ if (MSVC AND DEP_DEBUG)
 endif ()
 
 orcaslicer_add_cmake_project(Boost
+    ${_options}
     URL "https://github.com/boostorg/boost/releases/download/boost-1.84.0/boost-1.84.0.tar.gz"
     URL_HASH SHA256=4d27e9efed0f6f152dc28db6430b9d3dfb40c0345da7342eaa5a987dde57bd95
     LIST_SEPARATOR |

deps/CMakeLists.txt

@@ -155,17 +155,25 @@ if (NOT _is_multi AND NOT CMAKE_BUILD_TYPE)
 endif ()
 
 function(orcaslicer_add_cmake_project projectname)
-    cmake_parse_arguments(P_ARGS "" "INSTALL_DIR;BUILD_COMMAND;INSTALL_COMMAND" "CMAKE_ARGS" ${ARGN})
+    cmake_parse_arguments(P_ARGS "FORWARD_CONFIG" "INSTALL_DIR;BUILD_COMMAND;INSTALL_COMMAND" "CMAKE_ARGS" ${ARGN})
 
     set(_configs_line -DCMAKE_BUILD_TYPE:STRING=${CMAKE_BUILD_TYPE})
     if (_is_multi OR MSVC)
-        if (ORCA_INCLUDE_DEBUG_INFO AND NOT DEP_DEBUG)
+        if (P_ARGS_FORWARD_CONFIG)
+            set(_configs_line -DCMAKE_BUILD_TYPE:STRING=${CMAKE_BUILD_TYPE})
+        elseif (ORCA_INCLUDE_DEBUG_INFO AND NOT DEP_DEBUG)
             set(_configs_line "-DCMAKE_C_FLAGS_RELEASE:STRING=${CMAKE_C_FLAGS_RELWITHDEBINFO} -DCMAKE_CXX_FLAGS_RELEASE:STRING=${CMAKE_CXX_FLAGS_RELWITHDEBINFO}")
         else ()
             set(_configs_line "")
         endif ()
     endif ()
 
+    if (P_ARGS_FORWARD_CONFIG)
+        set(_target_config "$<CONFIG>")
+    else()
+        set(_target_config "Release")
+    endif()
+
     if (MSVC)
       set(_gen CMAKE_GENERATOR "${DEP_MSVC_GEN}" CMAKE_GENERATOR_PLATFORM "${DEP_PLATFORM}")
     else()
@@ -208,8 +216,8 @@ if (NOT IS_CROSS_COMPILE OR NOT APPLE)
             ${DEP_CMAKE_OPTS}
             ${P_ARGS_CMAKE_ARGS}
        ${P_ARGS_UNPARSED_ARGUMENTS}
-       BUILD_COMMAND ${CMAKE_COMMAND} --build . --config Release -- ${_build_j}
-       INSTALL_COMMAND ${CMAKE_COMMAND} --build . --target install --config Release
+       BUILD_COMMAND ${CMAKE_COMMAND} --build . --config ${_target_config} -- ${_build_j}
+       INSTALL_COMMAND ${CMAKE_COMMAND} --build . --target install --config ${_target_config}
     )
 
     if (FLATPAK)
@@ -251,8 +259,8 @@ else()
             ${DEP_CMAKE_OPTS}
             ${P_ARGS_CMAKE_ARGS}
        ${P_ARGS_UNPARSED_ARGUMENTS}
-       BUILD_COMMAND ${CMAKE_COMMAND} --build . --config Release -- ${_build_j}
-       INSTALL_COMMAND ${CMAKE_COMMAND} --build . --target install --config Release
+       BUILD_COMMAND ${CMAKE_COMMAND} --build . --config ${_target_config} -- ${_build_j}
+       INSTALL_COMMAND ${CMAKE_COMMAND} --build . --target install --config ${_target_config}
     )
 
 endif()

deps/Draco/Draco.cmake

@@ -1,4 +1,10 @@
+set(_options "")
+if (MSVC AND DEP_DEBUG)
+    set(_options "FORWARD_CONFIG")
+endif ()
+
 orcaslicer_add_cmake_project(Draco
+    ${_options}
     URL https://github.com/google/draco/archive/refs/tags/1.5.7.zip
     URL_HASH SHA256=27b72ba2d5ff3d0a9814ad40d4cb88f8dc89a35491c0866d952473f8f9416b77
 )

deps/OpenCV/OpenCV.cmake

@@ -2,8 +2,12 @@
 # leaves ~200 unresolved ippicv* externals at link time on Windows ARM64.
 if (MSVC AND NOT "${DEPS_ARCH}" STREQUAL "arm64")
     set(_use_IPP "-DWITH_IPP=ON")
+    if (DEP_DEBUG)
+        set(_options "FORWARD_CONFIG")
+    endif ()
 else ()
     set(_use_IPP "-DWITH_IPP=OFF")
+    set(_options "")
 endif ()
 
 if (IN_GIT_REPO)
@@ -11,6 +15,7 @@ if (IN_GIT_REPO)
 endif ()
 
 orcaslicer_add_cmake_project(OpenCV
+    ${_options}
     URL https://github.com/opencv/opencv/archive/refs/tags/4.6.0.tar.gz
     URL_HASH SHA256=1ec1cba65f9f20fe5a41fda1586e01c70ea0c9a6d7b67c9e13edf0cfe2239277
     PATCH_COMMAND git apply ${OpenCV_DIRECTORY_FLAG} --verbose --ignore-space-change --whitespace=fix ${CMAKE_CURRENT_LIST_DIR}/0001-vs.patch  ${CMAKE_CURRENT_LIST_DIR}/0002-clang19-macos.patch

deps_src/libnest2d/include/libnest2d/placers/nfpplacer.hpp

@@ -1123,18 +1123,17 @@ private:
 
         std::vector<RawShape> objs,excludes;
         for (const Item &item : items_) {
-            if (item.isFixed()) continue;
-            objs.push_back(item.transformedShape());
+            if (item.isFixed())
+                excludes.push_back(item.transformedShape());
+            else
+                objs.push_back(item.transformedShape());
         }
         if (objs.empty())
             return;
+        // Without fixed items this inner-fit NFP can exceed clipper's range and crash MSVC.
+        if (!excludes.empty())
         { // find a best position inside NFP of fixed items (excluded regions), so the center of pile is cloest to bed center
             RawShape objs_convex_hull = sl::convexHull(objs);
-            for (const Item &item : items_) {
-                if (item.isFixed()) {
-        		    excludes.push_back(item.transformedShape());
-                }
-            }
 
             auto   nfps = calcnfp(objs_convex_hull, excludes, bbin, Lvl<MaxNfpLevel::value>());
             if (nfps.empty()) {

resources/data/hints.ini

@@ -146,16 +146,16 @@ text = Fine-tuning for flow rate\nDid you know that flow rate can be fine-tuned
 text = Split your prints into plates\nDid you know that you can split a model that has a lot of parts into individual plates ready to print? This will simplify the process of keeping track of all the parts.
 
 [hint:Speed up your print with Adaptive Layer Height]
-text = Speed up your print with Adaptive Layer Height\nDid you know that you can print a model even faster, by using the Adaptive Layer Height option? Check it out!
+text = Speed up your print with Adaptive Layer Height\nDid you know that you can print a model even faster by using the Adaptive Layer Height option? Check it out!
 
 [hint:Support painting]
 text = Support painting\nDid you know that you can paint the location of your supports? This feature makes it easy to place the support material only on the sections of the model that actually need it.
 
 [hint:Different types of supports]
-text = Different types of supports\nDid you know that you can choose from multiple types of supports? Tree supports work great for organic models, while saving filament and improving print speed. Check them out!
+text = Different types of supports\nDid you know that you can choose from multiple types of supports? Tree supports work great for organic models while saving filament and improving print speed. Check them out!
 
 [hint:Printing Silk Filament]
-text = Printing Silk Filament\nDid you know that Silk filament needs special consideration to print it successfully? Higher temperature and lower speed are always recommended for the best results.
+text = Printing Silk Filament\nDid you know that Silk filament needs special consideration to print successfully? A higher temperature and lower speed are always recommended for the best results.
 
 [hint:Brim for better adhesion]
 text = Brim for better adhesion\nDid you know that when printed models have a small contact interface with the printing surface, it's recommended to use a brim?
@@ -167,13 +167,13 @@ text = Set parameters for multiple objects\nDid you know that you can set slicin
 text = Stack objects\nDid you know that you can stack objects as a whole one?
 
 [hint:Flush into support/objects/infill]
-text = Flush into support/objects/infill\nDid you know that you can reduce wasted filament by flushing it into support/objects/infill during filament change?
+text = Flush into support/objects/infill\nDid you know that you can reduce wasted filament by flushing it into support/objects/infill during filament changes?
 
 [hint:Improve strength]
 text = Improve strength\nDid you know that you can use more wall loops and higher sparse infill density to improve the strength of the model?
 
 [hint:When do you need to print with the printer door opened]
-text = When do you need to print with the printer door opened?\nDid you know that opening the printer door can reduce the probability of extruder/hotend clogging when printing lower temperature filament with a higher enclosure temperature? More info about this in the Wiki.
+text = When do you need to print with the printer door opened?\nDid you know that opening the printer door can reduce the probability of extruder/hotend clogging when printing lower temperature filament with a higher enclosure temperature? There is more info about this in the Wiki.
 
 [hint:Avoid warping]
 text = Avoid warping\nDid you know that when printing materials that are prone to warping such as ABS, appropriately increasing the heatbed temperature can reduce the probability of warping?

resources/images/extruder_sync.svg

@@ -0,0 +1,3 @@
+<svg width="20" height="20" viewBox="0 0 20 20" fill="none" xmlns="http://www.w3.org/2000/svg">
+<path fill-rule="evenodd" clip-rule="evenodd" d="M13.2992 1.42627C10.7774 1.42627 8.73315 3.47056 8.73315 5.99231C8.73315 8.51406 10.7774 10.5583 13.2992 10.5583C13.3609 10.5583 13.4223 10.5571 13.4834 10.5547C15.9197 10.4581 17.8652 8.45238 17.8652 5.99231C17.8652 3.47056 15.8209 1.42627 13.2992 1.42627ZM15.6185 11.0536C17.5346 10.1741 18.8652 8.23861 18.8652 5.99231C18.8652 2.91827 16.3732 0.42627 13.2992 0.42627C11.5793 0.42627 10.0417 1.2063 9.02067 2.43188H2.31853C1.93193 2.43188 1.61853 2.74528 1.61853 3.13188V12.4712C1.61853 12.6313 1.6723 12.7789 1.76278 12.8968C1.76671 13.0046 1.79621 13.1144 1.85576 13.2185L3.48408 16.0649C3.60875 16.2829 3.8406 16.4173 4.09168 16.4173H6.75859L7.97903 19.1586C8.22556 19.7123 9.01148 19.7123 9.25801 19.1586L10.4784 16.4173H13.1454C13.3965 16.4173 13.6283 16.2829 13.753 16.0649L15.3813 13.2185C15.4409 13.1144 15.4704 13.0046 15.4743 12.8968C15.5648 12.7789 15.6185 12.6313 15.6185 12.4712V11.0536ZM13.4429 11.5565C13.8469 11.5463 14.2403 11.493 14.6185 11.4011V12.1709H2.61853V3.43188H8.35573C7.95792 4.19837 7.73315 5.06909 7.73315 5.99231C7.73315 9.06635 10.2252 11.5583 13.2992 11.5583C13.3472 11.5583 13.3951 11.5577 13.4429 11.5565ZM2.98076 13.1712H14.2563L12.9714 15.4173H9.85194L9.84578 15.4173H7.39126L7.3851 15.4173H4.26569L2.98076 13.1712ZM9.38381 16.4173L8.61852 18.1363L7.85322 16.4173H9.38381ZM12.2021 3.36422C12.3973 3.55948 12.3973 3.87606 12.2021 4.07133L11.743 4.53041H16.0625C16.3386 4.53041 16.5625 4.75426 16.5625 5.03041C16.5625 5.30655 16.3386 5.53041 16.0625 5.53041H10.7773C10.2428 5.53041 9.97507 4.88412 10.353 4.50614L11.495 3.36422C11.6902 3.16896 12.0068 3.16896 12.2021 3.36422ZM14.3963 7.91305C14.2011 8.10831 14.2011 8.42489 14.3963 8.62015C14.5916 8.81542 14.9082 8.81542 15.1034 8.62015L16.2453 7.47823C16.6233 7.10026 16.3556 6.45397 15.8211 6.45397L10.5359 6.45397C10.2597 6.45397 10.0359 6.67783 10.0359 6.95397C10.0359 7.23011 10.2597 7.45397 10.5359 7.45397L14.8554 7.45397L14.3963 7.91305Z" fill="#262E30"/>
+</svg>

resources/profiles/Afinia.json

@@ -1,6 +1,6 @@
 {
 	"name": "Afinia",
-	"version": "02.04.00.02",
+	"version": "02.04.00.01",
 	"force_update": "0",
 	"description": "Afinia configurations",
 	"machine_model_list": [
@@ -124,6 +124,14 @@
 			"name": "fdm_filament_tpu",
 			"sub_path": "filament/fdm_filament_tpu.json"
 		},
+		{
+			"name": "Afinia ABS",
+			"sub_path": "filament/Afinia ABS.json"
+		},
+		{
+			"name": "Afinia ABS+",
+			"sub_path": "filament/Afinia ABS+.json"
+		},
 		{
 			"name": "Afinia ABS+@HS",
 			"sub_path": "filament/Afinia ABS+@HS.json"
@@ -132,18 +140,34 @@
 			"name": "Afinia ABS@HS",
 			"sub_path": "filament/Afinia ABS@HS.json"
 		},
+		{
+			"name": "Afinia Value ABS",
+			"sub_path": "filament/Afinia Value ABS.json"
+		},
 		{
 			"name": "Afinia Value ABS@HS",
 			"sub_path": "filament/Afinia Value ABS@HS.json"
 		},
+		{
+			"name": "Afinia PLA",
+			"sub_path": "filament/Afinia PLA.json"
+		},
 		{
 			"name": "Afinia PLA@HS",
 			"sub_path": "filament/Afinia PLA@HS.json"
 		},
+		{
+			"name": "Afinia Value PLA",
+			"sub_path": "filament/Afinia Value PLA.json"
+		},
 		{
 			"name": "Afinia Value PLA@HS",
 			"sub_path": "filament/Afinia Value PLA@HS.json"
 		},
+		{
+			"name": "Afinia TPU",
+			"sub_path": "filament/Afinia TPU.json"
+		},
 		{
 			"name": "Afinia TPU@HS",
 			"sub_path": "filament/Afinia TPU@HS.json"

resources/profiles/Afinia/filament/Afinia ABS+.json

@@ -0,0 +1,37 @@
+{
+	"type": "filament",
+	"filament_id": "GFB00",
+	"setting_id": "i5tf9foHnTVNmA2r",
+	"name": "Afinia ABS+",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_filament_abs",
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_cost": [
+		"24.99"
+	],
+	"filament_vendor": [
+		"Afinia"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"filament_max_volumetric_speed": [
+		"16"
+	],
+	"nozzle_temperature": [
+		"275"
+	],
+	"nozzle_temperature_initial_layer": [
+		"275"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"compatible_printers": [
+		"Afinia H400 Pro 0.4 nozzle",
+		"Afinia H400 Pro 0.6 nozzle"
+	]
+}

resources/profiles/Afinia/filament/Afinia ABS.json

@@ -0,0 +1,31 @@
+{
+	"type": "filament",
+	"filament_id": "GFB00",
+	"setting_id": "LhDHvMepbh8ecfQT",
+	"name": "Afinia ABS",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_filament_abs",
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_cost": [
+		"24.99"
+	],
+	"filament_vendor": [
+		"Afinia"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"filament_max_volumetric_speed": [
+		"16"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"compatible_printers": [
+		"Afinia H400 Pro 0.4 nozzle",
+		"Afinia H400 Pro 0.6 nozzle"
+	]
+}

resources/profiles/Afinia/filament/Afinia PLA.json

@@ -0,0 +1,34 @@
+{
+	"type": "filament",
+	"filament_id": "GFA00",
+	"setting_id": "1qEFsay7kjYIUkpG",
+	"name": "Afinia PLA",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_filament_pla",
+	"filament_cost": [
+		"24.99"
+	],
+	"filament_density": [
+		"1.26"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"21"
+	],
+	"filament_vendor": [
+		"Afinia"
+	],
+	"filament_long_retractions_when_cut": [
+		"1"
+	],
+	"filament_retraction_distances_when_cut": [
+		"18"
+	],
+	"compatible_printers": [
+		"Afinia H400 Pro 0.4 nozzle",
+		"Afinia H400 Pro 0.6 nozzle"
+	]
+}

resources/profiles/Afinia/filament/Afinia TPU.json

@@ -0,0 +1,28 @@
+{
+	"type": "filament",
+	"name": "Afinia TPU",
+	"inherits": "fdm_filament_tpu",
+	"from": "system",
+	"setting_id": "E7WBTARZ971LaDMj",
+	"filament_id": "GFU01",
+	"instantiation": "true",
+	"filament_vendor": [
+		"Afinia"
+	],
+	"filament_density": [
+		"1.22"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"filament_cost": [
+		"41.99"
+	],
+	"nozzle_temperature": [
+		"230"
+	],
+	"compatible_printers": [
+		"Afinia H400 Pro 0.4 nozzle",
+		"Afinia H400 Pro 0.6 nozzle"
+	]
+}

resources/profiles/Afinia/filament/Afinia Value ABS.json

@@ -0,0 +1,37 @@
+{
+	"type": "filament",
+	"filament_id": "GFB00",
+	"setting_id": "jEYVpOPBjFtQ0DXn",
+	"name": "Afinia Value ABS",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_filament_abs",
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_cost": [
+		"24.99"
+	],
+	"filament_vendor": [
+		"Afinia"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"filament_max_volumetric_speed": [
+		"16"
+	],
+	"nozzle_temperature": [
+		"245"
+	],
+	"nozzle_temperature_initial_layer": [
+		"245"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"compatible_printers": [
+		"Afinia H400 Pro 0.4 nozzle",
+		"Afinia H400 Pro 0.6 nozzle"
+	]
+}

resources/profiles/Afinia/filament/Afinia Value PLA.json

@@ -0,0 +1,40 @@
+{
+	"type": "filament",
+	"filament_id": "GFA00",
+	"setting_id": "oNBk0IxmW7C99WI3",
+	"name": "Afinia Value PLA",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_filament_pla",
+	"filament_cost": [
+		"24.99"
+	],
+	"filament_density": [
+		"1.26"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"21"
+	],
+	"filament_vendor": [
+		"Afinia"
+	],
+	"filament_long_retractions_when_cut": [
+		"1"
+	],
+	"filament_retraction_distances_when_cut": [
+		"18"
+	],
+	"nozzle_temperature": [
+		"190"
+	],
+	"nozzle_temperature_initial_layer": [
+		"190"
+	],
+	"compatible_printers": [
+		"Afinia H400 Pro 0.4 nozzle",
+		"Afinia H400 Pro 0.6 nozzle"
+	]
+}

resources/profiles/BBL.json

@@ -1,7 +1,7 @@
 {
 	"name": "Bambulab",
 	"url": "http://www.bambulab.com/Parameters/vendor/BBL.json",
-	"version": "02.01.00.19",
+	"version": "02.01.00.18",
 	"force_update": "0",
 	"description": "BBL configurations",
 	"machine_model_list": [
@@ -2177,10 +2177,6 @@
 			"name": "Generic ABS @BBL X2D 0.4 nozzle",
 			"sub_path": "filament/Generic ABS @BBL X2D 0.4 nozzle.json"
 		},
-		{
-			"name": "addnorth ABS rABS",
-			"sub_path": "filament/addnorth/addnorth ABS rABS.json"
-		},
 		{
 			"name": "PolyLite ABS @BBL A1",
 			"sub_path": "filament/Polymaker/PolyLite ABS @BBL A1.json"
@@ -3009,22 +3005,6 @@
 			"name": "Generic PA @BBL X2D 0.4 nozzle",
 			"sub_path": "filament/Generic PA @BBL X2D 0.4 nozzle.json"
 		},
-		{
-			"name": "addnorth PA Adura",
-			"sub_path": "filament/addnorth/addnorth PA Adura.json"
-		},
-		{
-			"name": "addnorth PA Adura FDA",
-			"sub_path": "filament/addnorth/addnorth PA Adura FDA.json"
-		},
-		{
-			"name": "addnorth PA6 Addlantis",
-			"sub_path": "filament/addnorth/addnorth PA6 Addlantis.json"
-		},
-		{
-			"name": "addnorth PVDF Adamant S1",
-			"sub_path": "filament/addnorth/addnorth PVDF Adamant S1.json"
-		},
 		{
 			"name": "Generic PA-CF",
 			"sub_path": "filament/Generic PA-CF.json"
@@ -3049,10 +3029,6 @@
 			"name": "Generic PA-CF @BBL X2D 0.4 nozzle",
 			"sub_path": "filament/Generic PA-CF @BBL X2D 0.4 nozzle.json"
 		},
-		{
-			"name": "addnorth PA-CF Adura X",
-			"sub_path": "filament/addnorth/addnorth PA-CF Adura X.json"
-		},
 		{
 			"name": "Bambu PC @BBL A1",
 			"sub_path": "filament/Bambu PC @BBL A1.json"
@@ -3353,10 +3329,6 @@
 			"name": "Generic PC @BBL X2D 0.4 nozzle",
 			"sub_path": "filament/Generic PC @BBL X2D 0.4 nozzle.json"
 		},
-		{
-			"name": "addnorth PC BLend HT LCF",
-			"sub_path": "filament/addnorth/addnorth PC BLend HT LCF.json"
-		},
 		{
 			"name": "Generic PCTG @BBL A1",
 			"sub_path": "filament/Generic PCTG @BBL A1.json"
@@ -4213,30 +4185,6 @@
 			"name": "Generic PETG @BBL X2D 0.4 nozzle",
 			"sub_path": "filament/Generic PETG @BBL X2D 0.4 nozzle.json"
 		},
-		{
-			"name": "addnorth PETG Base",
-			"sub_path": "filament/addnorth/addnorth PETG Base.json"
-		},
-		{
-			"name": "addnorth PETG ESD",
-			"sub_path": "filament/addnorth/addnorth PETG ESD.json"
-		},
-		{
-			"name": "addnorth PETG Economy",
-			"sub_path": "filament/addnorth/addnorth PETG Economy.json"
-		},
-		{
-			"name": "addnorth PETG Flame v0",
-			"sub_path": "filament/addnorth/addnorth PETG Flame v0.json"
-		},
-		{
-			"name": "addnorth PETG PRO Matte",
-			"sub_path": "filament/addnorth/addnorth PETG PRO Matte.json"
-		},
-		{
-			"name": "addnorth PETG rPETG Matte",
-			"sub_path": "filament/addnorth/addnorth PETG rPETG Matte.json"
-		},
 		{
 			"name": "Generic PETG HF @BBL A1",
 			"sub_path": "filament/Generic PETG HF @BBL A1.json"
@@ -4357,10 +4305,6 @@
 			"name": "Generic PETG-CF @BBL X2D 0.4 nozzle",
 			"sub_path": "filament/Generic PETG-CF @BBL X2D 0.4 nozzle.json"
 		},
-		{
-			"name": "addnorth PETG-CF Rigid X",
-			"sub_path": "filament/addnorth/addnorth PETG-CF Rigid X.json"
-		},
 		{
 			"name": "PolyLite PETG @BBL A1",
 			"sub_path": "filament/Polymaker/PolyLite PETG @BBL A1.json"
@@ -6645,34 +6589,6 @@
 			"name": "Generic PLA @BBL X2D 0.4 nozzle",
 			"sub_path": "filament/Generic PLA @BBL X2D 0.4 nozzle.json"
 		},
-		{
-			"name": "addnorth PLA E-PLA",
-			"sub_path": "filament/addnorth/addnorth PLA E-PLA.json"
-		},
-		{
-			"name": "addnorth PLA Economy",
-			"sub_path": "filament/addnorth/addnorth PLA Economy.json"
-		},
-		{
-			"name": "addnorth PLA HT-PLA PRO Matte",
-			"sub_path": "filament/addnorth/addnorth PLA HT-PLA PRO Matte.json"
-		},
-		{
-			"name": "addnorth PLA Textura",
-			"sub_path": "filament/addnorth/addnorth PLA Textura.json"
-		},
-		{
-			"name": "addnorth PLA Wood",
-			"sub_path": "filament/addnorth/addnorth PLA Wood.json"
-		},
-		{
-			"name": "addnorth PLA X-PLA",
-			"sub_path": "filament/addnorth/addnorth PLA X-PLA.json"
-		},
-		{
-			"name": "addnorth PLA rPLA RE-ADD",
-			"sub_path": "filament/addnorth/addnorth PLA rPLA RE-ADD.json"
-		},
 		{
 			"name": "Generic PLA High Speed @BBL A1",
 			"sub_path": "filament/Generic PLA High Speed @BBL A1.json"
@@ -6733,10 +6649,6 @@
 			"name": "Generic PLA High Speed @BBL X2D 0.4 nozzle",
 			"sub_path": "filament/Generic PLA High Speed @BBL X2D 0.4 nozzle.json"
 		},
-		{
-			"name": "addnorth PLA X-PLA High Speed",
-			"sub_path": "filament/addnorth/addnorth PLA X-PLA High Speed.json"
-		},
 		{
 			"name": "Generic PLA Silk",
 			"sub_path": "filament/Generic PLA Silk.json"
@@ -6777,10 +6689,6 @@
 			"name": "Generic PLA Silk @BBL X2D 0.4 nozzle",
 			"sub_path": "filament/Generic PLA Silk @BBL X2D 0.4 nozzle.json"
 		},
-		{
-			"name": "addnorth PLA Premium Silk",
-			"sub_path": "filament/addnorth/addnorth PLA Premium Silk.json"
-		},
 		{
 			"name": "Generic PLA-CF",
 			"sub_path": "filament/Generic PLA-CF.json"
@@ -6821,10 +6729,6 @@
 			"name": "Generic PLA-CF @BBL X2D 0.4 nozzle",
 			"sub_path": "filament/Generic PLA-CF @BBL X2D 0.4 nozzle.json"
 		},
-		{
-			"name": "addnorth PLA-CF Carbon Fiber",
-			"sub_path": "filament/addnorth/addnorth PLA-CF Carbon Fiber.json"
-		},
 		{
 			"name": "Numakers PLA+ @BBL A1",
 			"sub_path": "filament/Numakers/Numakers PLA+ @BBL A1.json"
@@ -7077,6 +6981,10 @@
 			"name": "Panchroma PLA @BBL X1C 0.2 nozzle",
 			"sub_path": "filament/Polymaker/Panchroma PLA @BBL X1C 0.2 nozzle.json"
 		},
+		{
+			"name": "Panchroma PLA Silk @BBL X1C 0.2 nozzle",
+			"sub_path": "filament/Polymaker/Panchroma PLA Silk @BBL X1C 0.2 nozzle.json"
+		},
 		{
 			"name": "Panchroma PLA Celestial @BBL A1",
 			"sub_path": "filament/Polymaker/Panchroma PLA Celestial @BBL A1.json"
@@ -7473,10 +7381,6 @@
 			"name": "Panchroma PLA Silk @BBL X1C",
 			"sub_path": "filament/Polymaker/Panchroma PLA Silk @BBL X1C.json"
 		},
-		{
-			"name": "Panchroma PLA Silk @BBL X1C 0.2 nozzle",
-			"sub_path": "filament/Polymaker/Panchroma PLA Silk @BBL X1C 0.2 nozzle.json"
-		},
 		{
 			"name": "Panchroma PLA Starlight @BBL A1",
 			"sub_path": "filament/Polymaker/Panchroma PLA Starlight @BBL A1.json"
@@ -8985,18 +8889,6 @@
 			"name": "Generic TPU @BBL X2D 0.4 nozzle",
 			"sub_path": "filament/Generic TPU @BBL X2D 0.4 nozzle.json"
 		},
-		{
-			"name": "addnorth TPU EasyFlex",
-			"sub_path": "filament/addnorth/addnorth TPU EasyFlex.json"
-		},
-		{
-			"name": "addnorth TPU Pro Matte 85A",
-			"sub_path": "filament/addnorth/addnorth TPU Pro Matte 85A.json"
-		},
-		{
-			"name": "addnorth TPU Pro Matte 95A",
-			"sub_path": "filament/addnorth/addnorth TPU Pro Matte 95A.json"
-		},
 		{
 			"name": "Generic TPU for AMS @BBL A1",
 			"sub_path": "filament/Generic TPU for AMS @BBL A1.json"

resources/profiles/BBL/filament/addnorth/addnorth ABS rABS.json

@@ -1,339 +0,0 @@
-{
-	"type": "filament",
-	"name": "addnorth ABS rABS",
-	"inherits": "Generic ABS @base",
-	"from": "system",
-	"setting_id": "GF_ANRA_00",
-	"filament_id": "GF_ANRA",
-	"instantiation": "true",
-	"activate_air_filtration": [
-		"1"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"chamber_temperatures": [
-		"50"
-	],
-	"circle_compensation_speed": [
-		"200"
-	],
-	"close_fan_the_first_x_layers": [
-		"3"
-	],
-	"compatible_printers": [
-		"Bambu Lab A1 mini 0.4 nozzle",
-		"Bambu Lab A1 mini 0.6 nozzle",
-		"Bambu Lab A1 mini 0.8 nozzle",
-		"Bambu Lab A1 0.4 nozzle",
-		"Bambu Lab A1 0.6 nozzle",
-		"Bambu Lab A1 0.8 nozzle",
-		"Bambu Lab P1P 0.4 nozzle",
-		"Bambu Lab P1P 0.6 nozzle",
-		"Bambu Lab P1P 0.8 nozzle",
-		"Bambu Lab P1S 0.4 nozzle",
-		"Bambu Lab P1S 0.6 nozzle",
-		"Bambu Lab P1S 0.8 nozzle",
-		"Bambu Lab X1 0.4 nozzle",
-		"Bambu Lab X1 0.6 nozzle",
-		"Bambu Lab X1 0.8 nozzle",
-		"Bambu Lab X1 Carbon 0.4 nozzle",
-		"Bambu Lab X1 Carbon 0.6 nozzle",
-		"Bambu Lab X1 Carbon 0.8 nozzle",
-		"Bambu Lab X1E 0.4 nozzle",
-		"Bambu Lab X1E 0.6 nozzle",
-		"Bambu Lab X1E 0.8 nozzle",
-		"Bambu Lab H2D 0.4 nozzle",
-		"Bambu Lab H2D 0.6 nozzle",
-		"Bambu Lab H2D 0.8 nozzle",
-		"Bambu Lab H2D Pro 0.4 nozzle",
-		"Bambu Lab H2D Pro 0.6 nozzle",
-		"Bambu Lab H2D Pro 0.8 nozzle",
-		"Bambu Lab H2S 0.4 nozzle",
-		"Bambu Lab H2S 0.6 nozzle",
-		"Bambu Lab H2S 0.8 nozzle",
-		"Bambu Lab P2S 0.4 nozzle",
-		"Bambu Lab P2S 0.6 nozzle",
-		"Bambu Lab P2S 0.8 nozzle",
-		"Bambu Lab X2D 0.2 nozzle",
-		"Bambu Lab X2D 0.4 nozzle",
-		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"cool_plate_temp": [
-		"0"
-	],
-	"cool_plate_temp_initial_layer": [
-		"0"
-	],
-	"counter_coef_1": [
-		"0"
-	],
-	"counter_coef_2": [
-		"0.008"
-	],
-	"counter_coef_3": [
-		"-0.041"
-	],
-	"counter_limit_max": [
-		"0.033"
-	],
-	"counter_limit_min": [
-		"-0.035"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"diameter_limit": [
-		"50"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"105"
-	],
-	"eng_plate_temp_initial_layer": [
-		"105"
-	],
-	"fan_cooling_layer_time": [
-		"30"
-	],
-	"fan_max_speed": [
-		"25"
-	],
-	"fan_min_speed": [
-		"0"
-	],
-	"filament_adhesiveness_category": [
-		"200"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cost": [
-		"43"
-	],
-	"filament_density": [
-		"1.03"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"12",
-		"12"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_notes": "File Version:2.6 - V.Pack:18_05_2026",
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_scarf_gap": [
-		"0%"
-	],
-	"filament_scarf_height": [
-		"10%"
-	],
-	"filament_scarf_length": [
-		"10"
-	],
-	"filament_scarf_seam_type": [
-		"none"
-	],
-	"filament_settings_id": [
-		"addnorth ABS rABS"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-	],
-	"filament_type": [
-		"ABS"
-	],
-	"filament_vendor": [
-		"addnorth"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hole_coef_1": [
-		"0"
-	],
-	"hole_coef_2": [
-		"-0.008"
-	],
-	"hole_coef_3": [
-		"0.23415"
-	],
-	"hole_limit_max": [
-		"0.22"
-	],
-	"hole_limit_min": [
-		"0.088"
-	],
-	"hot_plate_temp": [
-		"105"
-	],
-	"hot_plate_temp_initial_layer": [
-		"105"
-	],
-	"impact_strength_z": [
-		"10"
-	],
-	"nozzle_temperature": [
-		"255",
-		"255"
-	],
-	"nozzle_temperature_initial_layer": [
-		"250",
-		"250"
-	],
-	"nozzle_temperature_range_high": [
-		"260"
-	],
-	"nozzle_temperature_range_low": [
-		"230"
-	],
-	"overhang_fan_speed": [
-		"50"
-	],
-	"overhang_fan_threshold": [
-		"25%"
-	],
-	"overhang_threshold_participating_cooling": [
-		"95%"
-	],
-	"pre_start_fan_time": [
-		"2"
-	],
-	"pressure_advance": [
-		"0.02"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"0"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"0"
-	],
-	"temperature_vitrification": [
-		"100"
-	],
-	"textured_plate_temp": [
-		"105"
-	],
-	"textured_plate_temp_initial_layer": [
-		"105"
-	],
-	"version": "2.0.0.77"
-}

resources/profiles/BBL/filament/addnorth/addnorth PA Adura FDA.json

@@ -1,339 +0,0 @@
-{
-	"type": "filament",
-	"name": "addnorth PA Adura FDA",
-	"inherits": "Generic PA @base",
-	"from": "system",
-	"setting_id": "GF_ANAF_00",
-	"filament_id": "GF_ANAF",
-	"instantiation": "true",
-	"activate_air_filtration": [
-		"1"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"chamber_temperatures": [
-		"50"
-	],
-	"circle_compensation_speed": [
-		"200"
-	],
-	"close_fan_the_first_x_layers": [
-		"3"
-	],
-	"compatible_printers": [
-		"Bambu Lab A1 mini 0.4 nozzle",
-		"Bambu Lab A1 mini 0.6 nozzle",
-		"Bambu Lab A1 mini 0.8 nozzle",
-		"Bambu Lab A1 0.4 nozzle",
-		"Bambu Lab A1 0.6 nozzle",
-		"Bambu Lab A1 0.8 nozzle",
-		"Bambu Lab P1P 0.4 nozzle",
-		"Bambu Lab P1P 0.6 nozzle",
-		"Bambu Lab P1P 0.8 nozzle",
-		"Bambu Lab P1S 0.4 nozzle",
-		"Bambu Lab P1S 0.6 nozzle",
-		"Bambu Lab P1S 0.8 nozzle",
-		"Bambu Lab X1 0.4 nozzle",
-		"Bambu Lab X1 0.6 nozzle",
-		"Bambu Lab X1 0.8 nozzle",
-		"Bambu Lab X1 Carbon 0.4 nozzle",
-		"Bambu Lab X1 Carbon 0.6 nozzle",
-		"Bambu Lab X1 Carbon 0.8 nozzle",
-		"Bambu Lab X1E 0.4 nozzle",
-		"Bambu Lab X1E 0.6 nozzle",
-		"Bambu Lab X1E 0.8 nozzle",
-		"Bambu Lab H2D 0.4 nozzle",
-		"Bambu Lab H2D 0.6 nozzle",
-		"Bambu Lab H2D 0.8 nozzle",
-		"Bambu Lab H2D Pro 0.4 nozzle",
-		"Bambu Lab H2D Pro 0.6 nozzle",
-		"Bambu Lab H2D Pro 0.8 nozzle",
-		"Bambu Lab H2S 0.4 nozzle",
-		"Bambu Lab H2S 0.6 nozzle",
-		"Bambu Lab H2S 0.8 nozzle",
-		"Bambu Lab P2S 0.4 nozzle",
-		"Bambu Lab P2S 0.6 nozzle",
-		"Bambu Lab P2S 0.8 nozzle",
-		"Bambu Lab X2D 0.2 nozzle",
-		"Bambu Lab X2D 0.4 nozzle",
-		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"cool_plate_temp": [
-		"0"
-	],
-	"cool_plate_temp_initial_layer": [
-		"0"
-	],
-	"counter_coef_1": [
-		"0"
-	],
-	"counter_coef_2": [
-		"0.008"
-	],
-	"counter_coef_3": [
-		"-0.041"
-	],
-	"counter_limit_max": [
-		"0.033"
-	],
-	"counter_limit_min": [
-		"-0.035"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"diameter_limit": [
-		"50"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"100"
-	],
-	"eng_plate_temp_initial_layer": [
-		"100"
-	],
-	"fan_cooling_layer_time": [
-		"5"
-	],
-	"fan_max_speed": [
-		"30"
-	],
-	"fan_min_speed": [
-		"10"
-	],
-	"filament_adhesiveness_category": [
-		"300"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cost": [
-		"50"
-	],
-	"filament_density": [
-		"1.1"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard"
-	],
-	"filament_flow_ratio": [
-		"0.99",
-		"0.99"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"8",
-		"11"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_notes": "File Version:2.6 - V.Pack:18_05_2026",
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"1",
-		"1"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_scarf_gap": [
-		"0%"
-	],
-	"filament_scarf_height": [
-		"10%"
-	],
-	"filament_scarf_length": [
-		"10"
-	],
-	"filament_scarf_seam_type": [
-		"none"
-	],
-	"filament_settings_id": [
-		"addnorth PA Adura FDA"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-	],
-	"filament_type": [
-		"PA"
-	],
-	"filament_vendor": [
-		"addnorth"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"0.4",
-		"0.4"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"2"
-	],
-	"hole_coef_1": [
-		"0"
-	],
-	"hole_coef_2": [
-		"-0.008"
-	],
-	"hole_coef_3": [
-		"0.23415"
-	],
-	"hole_limit_max": [
-		"0.22"
-	],
-	"hole_limit_min": [
-		"0.088"
-	],
-	"hot_plate_temp": [
-		"100"
-	],
-	"hot_plate_temp_initial_layer": [
-		"100"
-	],
-	"impact_strength_z": [
-		"10"
-	],
-	"nozzle_temperature": [
-		"265",
-		"265"
-	],
-	"nozzle_temperature_initial_layer": [
-		"265",
-		"265"
-	],
-	"nozzle_temperature_range_high": [
-		"270"
-	],
-	"nozzle_temperature_range_low": [
-		"245"
-	],
-	"overhang_fan_speed": [
-		"70"
-	],
-	"overhang_fan_threshold": [
-		"10%"
-	],
-	"overhang_threshold_participating_cooling": [
-		"95%"
-	],
-	"pre_start_fan_time": [
-		"2"
-	],
-	"pressure_advance": [
-		"0.02"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"40"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"10"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"0"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"0"
-	],
-	"temperature_vitrification": [
-		"110"
-	],
-	"textured_plate_temp": [
-		"100"
-	],
-	"textured_plate_temp_initial_layer": [
-		"100"
-	],
-	"version": "2.0.0.77"
-}

resources/profiles/BBL/filament/addnorth/addnorth PA Adura.json

@@ -1,339 +0,0 @@
-{
-	"type": "filament",
-	"name": "addnorth PA Adura",
-	"inherits": "Generic PA @base",
-	"from": "system",
-	"setting_id": "GF_ANAD_00",
-	"filament_id": "GF_ANAD",
-	"instantiation": "true",
-	"activate_air_filtration": [
-		"1"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"chamber_temperatures": [
-		"50"
-	],
-	"circle_compensation_speed": [
-		"200"
-	],
-	"close_fan_the_first_x_layers": [
-		"3"
-	],
-	"compatible_printers": [
-		"Bambu Lab A1 mini 0.4 nozzle",
-		"Bambu Lab A1 mini 0.6 nozzle",
-		"Bambu Lab A1 mini 0.8 nozzle",
-		"Bambu Lab A1 0.4 nozzle",
-		"Bambu Lab A1 0.6 nozzle",
-		"Bambu Lab A1 0.8 nozzle",
-		"Bambu Lab P1P 0.4 nozzle",
-		"Bambu Lab P1P 0.6 nozzle",
-		"Bambu Lab P1P 0.8 nozzle",
-		"Bambu Lab P1S 0.4 nozzle",
-		"Bambu Lab P1S 0.6 nozzle",
-		"Bambu Lab P1S 0.8 nozzle",
-		"Bambu Lab X1 0.4 nozzle",
-		"Bambu Lab X1 0.6 nozzle",
-		"Bambu Lab X1 0.8 nozzle",
-		"Bambu Lab X1 Carbon 0.4 nozzle",
-		"Bambu Lab X1 Carbon 0.6 nozzle",
-		"Bambu Lab X1 Carbon 0.8 nozzle",
-		"Bambu Lab X1E 0.4 nozzle",
-		"Bambu Lab X1E 0.6 nozzle",
-		"Bambu Lab X1E 0.8 nozzle",
-		"Bambu Lab H2D 0.4 nozzle",
-		"Bambu Lab H2D 0.6 nozzle",
-		"Bambu Lab H2D 0.8 nozzle",
-		"Bambu Lab H2D Pro 0.4 nozzle",
-		"Bambu Lab H2D Pro 0.6 nozzle",
-		"Bambu Lab H2D Pro 0.8 nozzle",
-		"Bambu Lab H2S 0.4 nozzle",
-		"Bambu Lab H2S 0.6 nozzle",
-		"Bambu Lab H2S 0.8 nozzle",
-		"Bambu Lab P2S 0.4 nozzle",
-		"Bambu Lab P2S 0.6 nozzle",
-		"Bambu Lab P2S 0.8 nozzle",
-		"Bambu Lab X2D 0.2 nozzle",
-		"Bambu Lab X2D 0.4 nozzle",
-		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"cool_plate_temp": [
-		"0"
-	],
-	"cool_plate_temp_initial_layer": [
-		"0"
-	],
-	"counter_coef_1": [
-		"0"
-	],
-	"counter_coef_2": [
-		"0.008"
-	],
-	"counter_coef_3": [
-		"-0.041"
-	],
-	"counter_limit_max": [
-		"0.033"
-	],
-	"counter_limit_min": [
-		"-0.035"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"diameter_limit": [
-		"50"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"100"
-	],
-	"eng_plate_temp_initial_layer": [
-		"100"
-	],
-	"fan_cooling_layer_time": [
-		"5"
-	],
-	"fan_max_speed": [
-		"30"
-	],
-	"fan_min_speed": [
-		"10"
-	],
-	"filament_adhesiveness_category": [
-		"300"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cost": [
-		"50"
-	],
-	"filament_density": [
-		"1.1"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard"
-	],
-	"filament_flow_ratio": [
-		"0.99",
-		"0.99"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"8",
-		"11"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_notes": "File Version:2.6 - V.Pack:18_05_2026",
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"1",
-		"1"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_scarf_gap": [
-		"0%"
-	],
-	"filament_scarf_height": [
-		"10%"
-	],
-	"filament_scarf_length": [
-		"10"
-	],
-	"filament_scarf_seam_type": [
-		"none"
-	],
-	"filament_settings_id": [
-		"addnorth PA Adura"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-	],
-	"filament_type": [
-		"PA"
-	],
-	"filament_vendor": [
-		"addnorth"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"0.4",
-		"0.4"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"2"
-	],
-	"hole_coef_1": [
-		"0"
-	],
-	"hole_coef_2": [
-		"-0.008"
-	],
-	"hole_coef_3": [
-		"0.23415"
-	],
-	"hole_limit_max": [
-		"0.22"
-	],
-	"hole_limit_min": [
-		"0.088"
-	],
-	"hot_plate_temp": [
-		"100"
-	],
-	"hot_plate_temp_initial_layer": [
-		"100"
-	],
-	"impact_strength_z": [
-		"10"
-	],
-	"nozzle_temperature": [
-		"265",
-		"265"
-	],
-	"nozzle_temperature_initial_layer": [
-		"265",
-		"265"
-	],
-	"nozzle_temperature_range_high": [
-		"270"
-	],
-	"nozzle_temperature_range_low": [
-		"245"
-	],
-	"overhang_fan_speed": [
-		"70"
-	],
-	"overhang_fan_threshold": [
-		"10%"
-	],
-	"overhang_threshold_participating_cooling": [
-		"95%"
-	],
-	"pre_start_fan_time": [
-		"2"
-	],
-	"pressure_advance": [
-		"0.02"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"40"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"10"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"0"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"0"
-	],
-	"temperature_vitrification": [
-		"110"
-	],
-	"textured_plate_temp": [
-		"100"
-	],
-	"textured_plate_temp_initial_layer": [
-		"100"
-	],
-	"version": "2.0.0.77"
-}

resources/profiles/BBL/filament/addnorth/addnorth PA-CF Adura X.json

@@ -1,339 +0,0 @@
-{
-	"type": "filament",
-	"name": "addnorth PA-CF Adura X",
-	"inherits": "Generic PA-CF @base",
-	"from": "system",
-	"setting_id": "GF_ANAX_00",
-	"filament_id": "GF_ANAX",
-	"instantiation": "true",
-	"activate_air_filtration": [
-		"1"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"chamber_temperatures": [
-		"50"
-	],
-	"circle_compensation_speed": [
-		"200"
-	],
-	"close_fan_the_first_x_layers": [
-		"3"
-	],
-	"compatible_printers": [
-		"Bambu Lab A1 mini 0.4 nozzle",
-		"Bambu Lab A1 mini 0.6 nozzle",
-		"Bambu Lab A1 mini 0.8 nozzle",
-		"Bambu Lab A1 0.4 nozzle",
-		"Bambu Lab A1 0.6 nozzle",
-		"Bambu Lab A1 0.8 nozzle",
-		"Bambu Lab P1P 0.4 nozzle",
-		"Bambu Lab P1P 0.6 nozzle",
-		"Bambu Lab P1P 0.8 nozzle",
-		"Bambu Lab P1S 0.4 nozzle",
-		"Bambu Lab P1S 0.6 nozzle",
-		"Bambu Lab P1S 0.8 nozzle",
-		"Bambu Lab X1 0.4 nozzle",
-		"Bambu Lab X1 0.6 nozzle",
-		"Bambu Lab X1 0.8 nozzle",
-		"Bambu Lab X1 Carbon 0.4 nozzle",
-		"Bambu Lab X1 Carbon 0.6 nozzle",
-		"Bambu Lab X1 Carbon 0.8 nozzle",
-		"Bambu Lab X1E 0.4 nozzle",
-		"Bambu Lab X1E 0.6 nozzle",
-		"Bambu Lab X1E 0.8 nozzle",
-		"Bambu Lab H2D 0.4 nozzle",
-		"Bambu Lab H2D 0.6 nozzle",
-		"Bambu Lab H2D 0.8 nozzle",
-		"Bambu Lab H2D Pro 0.4 nozzle",
-		"Bambu Lab H2D Pro 0.6 nozzle",
-		"Bambu Lab H2D Pro 0.8 nozzle",
-		"Bambu Lab H2S 0.4 nozzle",
-		"Bambu Lab H2S 0.6 nozzle",
-		"Bambu Lab H2S 0.8 nozzle",
-		"Bambu Lab P2S 0.4 nozzle",
-		"Bambu Lab P2S 0.6 nozzle",
-		"Bambu Lab P2S 0.8 nozzle",
-		"Bambu Lab X2D 0.2 nozzle",
-		"Bambu Lab X2D 0.4 nozzle",
-		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"cool_plate_temp": [
-		"0"
-	],
-	"cool_plate_temp_initial_layer": [
-		"0"
-	],
-	"counter_coef_1": [
-		"0"
-	],
-	"counter_coef_2": [
-		"0.008"
-	],
-	"counter_coef_3": [
-		"-0.041"
-	],
-	"counter_limit_max": [
-		"0.033"
-	],
-	"counter_limit_min": [
-		"-0.035"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"diameter_limit": [
-		"50"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"100"
-	],
-	"eng_plate_temp_initial_layer": [
-		"100"
-	],
-	"fan_cooling_layer_time": [
-		"5"
-	],
-	"fan_max_speed": [
-		"30"
-	],
-	"fan_min_speed": [
-		"10"
-	],
-	"filament_adhesiveness_category": [
-		"300"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cost": [
-		"109"
-	],
-	"filament_density": [
-		"1.2"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard"
-	],
-	"filament_flow_ratio": [
-		"0.99",
-		"0.99"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"8",
-		"15"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_notes": "File Version:2.6 - V.Pack:18_05_2026",
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_scarf_gap": [
-		"0%"
-	],
-	"filament_scarf_height": [
-		"10%"
-	],
-	"filament_scarf_length": [
-		"10"
-	],
-	"filament_scarf_seam_type": [
-		"none"
-	],
-	"filament_settings_id": [
-		"addnorth PA-CF Adura X"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-	],
-	"filament_type": [
-		"PA-CF"
-	],
-	"filament_vendor": [
-		"addnorth"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"2"
-	],
-	"hole_coef_1": [
-		"0"
-	],
-	"hole_coef_2": [
-		"-0.008"
-	],
-	"hole_coef_3": [
-		"0.23415"
-	],
-	"hole_limit_max": [
-		"0.22"
-	],
-	"hole_limit_min": [
-		"0.088"
-	],
-	"hot_plate_temp": [
-		"100"
-	],
-	"hot_plate_temp_initial_layer": [
-		"100"
-	],
-	"impact_strength_z": [
-		"10"
-	],
-	"nozzle_temperature": [
-		"280",
-		"280"
-	],
-	"nozzle_temperature_initial_layer": [
-		"275",
-		"275"
-	],
-	"nozzle_temperature_range_high": [
-		"280"
-	],
-	"nozzle_temperature_range_low": [
-		"260"
-	],
-	"overhang_fan_speed": [
-		"90"
-	],
-	"overhang_fan_threshold": [
-		"10%"
-	],
-	"overhang_threshold_participating_cooling": [
-		"95%"
-	],
-	"pre_start_fan_time": [
-		"2"
-	],
-	"pressure_advance": [
-		"0.02"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"40"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"2"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"0"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"0"
-	],
-	"temperature_vitrification": [
-		"120"
-	],
-	"textured_plate_temp": [
-		"100"
-	],
-	"textured_plate_temp_initial_layer": [
-		"100"
-	],
-	"version": "2.0.0.77"
-}

resources/profiles/BBL/filament/addnorth/addnorth PA6 Addlantis.json

@@ -1,339 +0,0 @@
-{
-	"type": "filament",
-	"name": "addnorth PA6 Addlantis",
-	"inherits": "Generic PA @base",
-	"from": "system",
-	"setting_id": "GF_ANLA_00",
-	"filament_id": "GF_ANLA",
-	"instantiation": "true",
-	"activate_air_filtration": [
-		"1"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"chamber_temperatures": [
-		"60"
-	],
-	"circle_compensation_speed": [
-		"200"
-	],
-	"close_fan_the_first_x_layers": [
-		"3"
-	],
-	"compatible_printers": [
-		"Bambu Lab A1 mini 0.4 nozzle",
-		"Bambu Lab A1 mini 0.6 nozzle",
-		"Bambu Lab A1 mini 0.8 nozzle",
-		"Bambu Lab A1 0.4 nozzle",
-		"Bambu Lab A1 0.6 nozzle",
-		"Bambu Lab A1 0.8 nozzle",
-		"Bambu Lab P1P 0.4 nozzle",
-		"Bambu Lab P1P 0.6 nozzle",
-		"Bambu Lab P1P 0.8 nozzle",
-		"Bambu Lab P1S 0.4 nozzle",
-		"Bambu Lab P1S 0.6 nozzle",
-		"Bambu Lab P1S 0.8 nozzle",
-		"Bambu Lab X1 0.4 nozzle",
-		"Bambu Lab X1 0.6 nozzle",
-		"Bambu Lab X1 0.8 nozzle",
-		"Bambu Lab X1 Carbon 0.4 nozzle",
-		"Bambu Lab X1 Carbon 0.6 nozzle",
-		"Bambu Lab X1 Carbon 0.8 nozzle",
-		"Bambu Lab X1E 0.4 nozzle",
-		"Bambu Lab X1E 0.6 nozzle",
-		"Bambu Lab X1E 0.8 nozzle",
-		"Bambu Lab H2D 0.4 nozzle",
-		"Bambu Lab H2D 0.6 nozzle",
-		"Bambu Lab H2D 0.8 nozzle",
-		"Bambu Lab H2D Pro 0.4 nozzle",
-		"Bambu Lab H2D Pro 0.6 nozzle",
-		"Bambu Lab H2D Pro 0.8 nozzle",
-		"Bambu Lab H2S 0.4 nozzle",
-		"Bambu Lab H2S 0.6 nozzle",
-		"Bambu Lab H2S 0.8 nozzle",
-		"Bambu Lab P2S 0.4 nozzle",
-		"Bambu Lab P2S 0.6 nozzle",
-		"Bambu Lab P2S 0.8 nozzle",
-		"Bambu Lab X2D 0.2 nozzle",
-		"Bambu Lab X2D 0.4 nozzle",
-		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"cool_plate_temp": [
-		"0"
-	],
-	"cool_plate_temp_initial_layer": [
-		"0"
-	],
-	"counter_coef_1": [
-		"0"
-	],
-	"counter_coef_2": [
-		"0.008"
-	],
-	"counter_coef_3": [
-		"-0.041"
-	],
-	"counter_limit_max": [
-		"0.033"
-	],
-	"counter_limit_min": [
-		"-0.035"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"diameter_limit": [
-		"50"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"100"
-	],
-	"eng_plate_temp_initial_layer": [
-		"100"
-	],
-	"fan_cooling_layer_time": [
-		"5"
-	],
-	"fan_max_speed": [
-		"30"
-	],
-	"fan_min_speed": [
-		"10"
-	],
-	"filament_adhesiveness_category": [
-		"300"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cost": [
-		"82"
-	],
-	"filament_density": [
-		"1.18"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard"
-	],
-	"filament_flow_ratio": [
-		"0.99",
-		"0.99"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"8",
-		"11"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_notes": "File Version:2.62 - V.Pack:18_05_2026",
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"0.6",
-		"0.6"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_scarf_gap": [
-		"0%"
-	],
-	"filament_scarf_height": [
-		"10%"
-	],
-	"filament_scarf_length": [
-		"10"
-	],
-	"filament_scarf_seam_type": [
-		"none"
-	],
-	"filament_settings_id": [
-		"addnorth PA6 Addlantis"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-	],
-	"filament_type": [
-		"PA6"
-	],
-	"filament_vendor": [
-		"addnorth"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"0.4",
-		"0.4"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"2"
-	],
-	"hole_coef_1": [
-		"0"
-	],
-	"hole_coef_2": [
-		"-0.008"
-	],
-	"hole_coef_3": [
-		"0.23415"
-	],
-	"hole_limit_max": [
-		"0.22"
-	],
-	"hole_limit_min": [
-		"0.088"
-	],
-	"hot_plate_temp": [
-		"100"
-	],
-	"hot_plate_temp_initial_layer": [
-		"100"
-	],
-	"impact_strength_z": [
-		"10"
-	],
-	"nozzle_temperature": [
-		"275",
-		"275"
-	],
-	"nozzle_temperature_initial_layer": [
-		"275",
-		"275"
-	],
-	"nozzle_temperature_range_high": [
-		"285"
-	],
-	"nozzle_temperature_range_low": [
-		"265"
-	],
-	"overhang_fan_speed": [
-		"40"
-	],
-	"overhang_fan_threshold": [
-		"0%"
-	],
-	"overhang_threshold_participating_cooling": [
-		"95%"
-	],
-	"pre_start_fan_time": [
-		"2"
-	],
-	"pressure_advance": [
-		"0.02"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"40"
-	],
-	"slow_down_for_layer_cooling": [
-		"0"
-	],
-	"slow_down_layer_time": [
-		"15"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"0"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"0"
-	],
-	"temperature_vitrification": [
-		"110"
-	],
-	"textured_plate_temp": [
-		"100"
-	],
-	"textured_plate_temp_initial_layer": [
-		"100"
-	],
-	"version": "2.0.0.77"
-}

resources/profiles/BBL/filament/addnorth/addnorth PC BLend HT LCF.json

@@ -1,339 +0,0 @@
-{
-	"type": "filament",
-	"name": "addnorth PC BLend HT LCF",
-	"inherits": "Generic PC @base",
-	"from": "system",
-	"setting_id": "GF_ANPBX_00",
-	"filament_id": "GF_ANPBX",
-	"instantiation": "true",
-	"activate_air_filtration": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"chamber_temperatures": [
-		"50"
-	],
-	"circle_compensation_speed": [
-		"200"
-	],
-	"close_fan_the_first_x_layers": [
-		"3"
-	],
-	"compatible_printers": [
-		"Bambu Lab A1 mini 0.4 nozzle",
-		"Bambu Lab A1 mini 0.6 nozzle",
-		"Bambu Lab A1 mini 0.8 nozzle",
-		"Bambu Lab A1 0.4 nozzle",
-		"Bambu Lab A1 0.6 nozzle",
-		"Bambu Lab A1 0.8 nozzle",
-		"Bambu Lab P1P 0.4 nozzle",
-		"Bambu Lab P1P 0.6 nozzle",
-		"Bambu Lab P1P 0.8 nozzle",
-		"Bambu Lab P1S 0.4 nozzle",
-		"Bambu Lab P1S 0.6 nozzle",
-		"Bambu Lab P1S 0.8 nozzle",
-		"Bambu Lab X1 0.4 nozzle",
-		"Bambu Lab X1 0.6 nozzle",
-		"Bambu Lab X1 0.8 nozzle",
-		"Bambu Lab X1 Carbon 0.4 nozzle",
-		"Bambu Lab X1 Carbon 0.6 nozzle",
-		"Bambu Lab X1 Carbon 0.8 nozzle",
-		"Bambu Lab X1E 0.4 nozzle",
-		"Bambu Lab X1E 0.6 nozzle",
-		"Bambu Lab X1E 0.8 nozzle",
-		"Bambu Lab H2D 0.4 nozzle",
-		"Bambu Lab H2D 0.6 nozzle",
-		"Bambu Lab H2D 0.8 nozzle",
-		"Bambu Lab H2D Pro 0.4 nozzle",
-		"Bambu Lab H2D Pro 0.6 nozzle",
-		"Bambu Lab H2D Pro 0.8 nozzle",
-		"Bambu Lab H2S 0.4 nozzle",
-		"Bambu Lab H2S 0.6 nozzle",
-		"Bambu Lab H2S 0.8 nozzle",
-		"Bambu Lab P2S 0.4 nozzle",
-		"Bambu Lab P2S 0.6 nozzle",
-		"Bambu Lab P2S 0.8 nozzle",
-		"Bambu Lab X2D 0.2 nozzle",
-		"Bambu Lab X2D 0.4 nozzle",
-		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"cool_plate_temp": [
-		"0"
-	],
-	"cool_plate_temp_initial_layer": [
-		"0"
-	],
-	"counter_coef_1": [
-		"0"
-	],
-	"counter_coef_2": [
-		"0.008"
-	],
-	"counter_coef_3": [
-		"-0.041"
-	],
-	"counter_limit_max": [
-		"0.033"
-	],
-	"counter_limit_min": [
-		"-0.035"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"diameter_limit": [
-		"50"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"70"
-	],
-	"eng_plate_temp_initial_layer": [
-		"70"
-	],
-	"fan_cooling_layer_time": [
-		"30"
-	],
-	"fan_max_speed": [
-		"40"
-	],
-	"fan_min_speed": [
-		"40"
-	],
-	"filament_adhesiveness_category": [
-		"300"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cost": [
-		"109"
-	],
-	"filament_density": [
-		"1.3"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"15",
-		"15"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_notes": "File Version:2.6 - V.Pack:18_05_2026",
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_scarf_gap": [
-		"0%"
-	],
-	"filament_scarf_height": [
-		"10%"
-	],
-	"filament_scarf_length": [
-		"10"
-	],
-	"filament_scarf_seam_type": [
-		"none"
-	],
-	"filament_settings_id": [
-		"addnorth PC BLend HT LCF"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-	],
-	"filament_type": [
-		"PC"
-	],
-	"filament_vendor": [
-		"addnorth"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hole_coef_1": [
-		"0"
-	],
-	"hole_coef_2": [
-		"-0.008"
-	],
-	"hole_coef_3": [
-		"0.23415"
-	],
-	"hole_limit_max": [
-		"0.22"
-	],
-	"hole_limit_min": [
-		"0.088"
-	],
-	"hot_plate_temp": [
-		"80"
-	],
-	"hot_plate_temp_initial_layer": [
-		"80"
-	],
-	"impact_strength_z": [
-		"10"
-	],
-	"nozzle_temperature": [
-		"285",
-		"285"
-	],
-	"nozzle_temperature_initial_layer": [
-		"275",
-		"275"
-	],
-	"nozzle_temperature_range_high": [
-		"290"
-	],
-	"nozzle_temperature_range_low": [
-		"265"
-	],
-	"overhang_fan_speed": [
-		"90"
-	],
-	"overhang_fan_threshold": [
-		"10%"
-	],
-	"overhang_threshold_participating_cooling": [
-		"95%"
-	],
-	"pre_start_fan_time": [
-		"2"
-	],
-	"pressure_advance": [
-		"0.02"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"40"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"2"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"70"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"70"
-	],
-	"temperature_vitrification": [
-		"185"
-	],
-	"textured_plate_temp": [
-		"100"
-	],
-	"textured_plate_temp_initial_layer": [
-		"100"
-	],
-	"version": "2.0.0.77"
-}

resources/profiles/BBL/filament/addnorth/addnorth PETG Base.json

@@ -1,339 +0,0 @@
-{
-	"type": "filament",
-	"name": "addnorth PETG Base",
-	"inherits": "Generic PETG @base",
-	"from": "system",
-	"setting_id": "GF_ANPE_00",
-	"filament_id": "GF_ANPE",
-	"instantiation": "true",
-	"activate_air_filtration": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"chamber_temperatures": [
-		"0"
-	],
-	"circle_compensation_speed": [
-		"200"
-	],
-	"close_fan_the_first_x_layers": [
-		"3"
-	],
-	"compatible_printers": [
-		"Bambu Lab A1 mini 0.4 nozzle",
-		"Bambu Lab A1 mini 0.6 nozzle",
-		"Bambu Lab A1 mini 0.8 nozzle",
-		"Bambu Lab A1 0.4 nozzle",
-		"Bambu Lab A1 0.6 nozzle",
-		"Bambu Lab A1 0.8 nozzle",
-		"Bambu Lab P1P 0.4 nozzle",
-		"Bambu Lab P1P 0.6 nozzle",
-		"Bambu Lab P1P 0.8 nozzle",
-		"Bambu Lab P1S 0.4 nozzle",
-		"Bambu Lab P1S 0.6 nozzle",
-		"Bambu Lab P1S 0.8 nozzle",
-		"Bambu Lab X1 0.4 nozzle",
-		"Bambu Lab X1 0.6 nozzle",
-		"Bambu Lab X1 0.8 nozzle",
-		"Bambu Lab X1 Carbon 0.4 nozzle",
-		"Bambu Lab X1 Carbon 0.6 nozzle",
-		"Bambu Lab X1 Carbon 0.8 nozzle",
-		"Bambu Lab X1E 0.4 nozzle",
-		"Bambu Lab X1E 0.6 nozzle",
-		"Bambu Lab X1E 0.8 nozzle",
-		"Bambu Lab H2D 0.4 nozzle",
-		"Bambu Lab H2D 0.6 nozzle",
-		"Bambu Lab H2D 0.8 nozzle",
-		"Bambu Lab H2D Pro 0.4 nozzle",
-		"Bambu Lab H2D Pro 0.6 nozzle",
-		"Bambu Lab H2D Pro 0.8 nozzle",
-		"Bambu Lab H2S 0.4 nozzle",
-		"Bambu Lab H2S 0.6 nozzle",
-		"Bambu Lab H2S 0.8 nozzle",
-		"Bambu Lab P2S 0.4 nozzle",
-		"Bambu Lab P2S 0.6 nozzle",
-		"Bambu Lab P2S 0.8 nozzle",
-		"Bambu Lab X2D 0.2 nozzle",
-		"Bambu Lab X2D 0.4 nozzle",
-		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"cool_plate_temp": [
-		"0"
-	],
-	"cool_plate_temp_initial_layer": [
-		"0"
-	],
-	"counter_coef_1": [
-		"0"
-	],
-	"counter_coef_2": [
-		"0.008"
-	],
-	"counter_coef_3": [
-		"-0.041"
-	],
-	"counter_limit_max": [
-		"0.033"
-	],
-	"counter_limit_min": [
-		"-0.035"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"diameter_limit": [
-		"50"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"70"
-	],
-	"eng_plate_temp_initial_layer": [
-		"70"
-	],
-	"fan_cooling_layer_time": [
-		"30"
-	],
-	"fan_max_speed": [
-		"90"
-	],
-	"fan_min_speed": [
-		"40"
-	],
-	"filament_adhesiveness_category": [
-		"300"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cost": [
-		"35.6"
-	],
-	"filament_density": [
-		"1.27"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"10",
-		"10"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_notes": "File Version:2.6 - V.Pack:18_05_2026",
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_scarf_gap": [
-		"0%"
-	],
-	"filament_scarf_height": [
-		"10%"
-	],
-	"filament_scarf_length": [
-		"10"
-	],
-	"filament_scarf_seam_type": [
-		"none"
-	],
-	"filament_settings_id": [
-		"addnorth PETG Base"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-	],
-	"filament_type": [
-		"PETG"
-	],
-	"filament_vendor": [
-		"addnorth"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hole_coef_1": [
-		"0"
-	],
-	"hole_coef_2": [
-		"-0.008"
-	],
-	"hole_coef_3": [
-		"0.23415"
-	],
-	"hole_limit_max": [
-		"0.22"
-	],
-	"hole_limit_min": [
-		"0.088"
-	],
-	"hot_plate_temp": [
-		"80"
-	],
-	"hot_plate_temp_initial_layer": [
-		"80"
-	],
-	"impact_strength_z": [
-		"10"
-	],
-	"nozzle_temperature": [
-		"260",
-		"260"
-	],
-	"nozzle_temperature_initial_layer": [
-		"255",
-		"255"
-	],
-	"nozzle_temperature_range_high": [
-		"275"
-	],
-	"nozzle_temperature_range_low": [
-		"240"
-	],
-	"overhang_fan_speed": [
-		"90"
-	],
-	"overhang_fan_threshold": [
-		"10%"
-	],
-	"overhang_threshold_participating_cooling": [
-		"95%"
-	],
-	"pre_start_fan_time": [
-		"2"
-	],
-	"pressure_advance": [
-		"0.02"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"70"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"70"
-	],
-	"temperature_vitrification": [
-		"50"
-	],
-	"textured_plate_temp": [
-		"75"
-	],
-	"textured_plate_temp_initial_layer": [
-		"75"
-	],
-	"version": "2.0.0.77"
-}

resources/profiles/BBL/filament/addnorth/addnorth PETG ESD.json

@@ -1,339 +0,0 @@
-{
-	"type": "filament",
-	"name": "addnorth PETG ESD",
-	"inherits": "Generic PETG @base",
-	"from": "system",
-	"setting_id": "GF_ANEG_00",
-	"filament_id": "GF_ANEG",
-	"instantiation": "true",
-	"activate_air_filtration": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"chamber_temperatures": [
-		"0"
-	],
-	"circle_compensation_speed": [
-		"200"
-	],
-	"close_fan_the_first_x_layers": [
-		"3"
-	],
-	"compatible_printers": [
-		"Bambu Lab A1 mini 0.4 nozzle",
-		"Bambu Lab A1 mini 0.6 nozzle",
-		"Bambu Lab A1 mini 0.8 nozzle",
-		"Bambu Lab A1 0.4 nozzle",
-		"Bambu Lab A1 0.6 nozzle",
-		"Bambu Lab A1 0.8 nozzle",
-		"Bambu Lab P1P 0.4 nozzle",
-		"Bambu Lab P1P 0.6 nozzle",
-		"Bambu Lab P1P 0.8 nozzle",
-		"Bambu Lab P1S 0.4 nozzle",
-		"Bambu Lab P1S 0.6 nozzle",
-		"Bambu Lab P1S 0.8 nozzle",
-		"Bambu Lab X1 0.4 nozzle",
-		"Bambu Lab X1 0.6 nozzle",
-		"Bambu Lab X1 0.8 nozzle",
-		"Bambu Lab X1 Carbon 0.4 nozzle",
-		"Bambu Lab X1 Carbon 0.6 nozzle",
-		"Bambu Lab X1 Carbon 0.8 nozzle",
-		"Bambu Lab X1E 0.4 nozzle",
-		"Bambu Lab X1E 0.6 nozzle",
-		"Bambu Lab X1E 0.8 nozzle",
-		"Bambu Lab H2D 0.4 nozzle",
-		"Bambu Lab H2D 0.6 nozzle",
-		"Bambu Lab H2D 0.8 nozzle",
-		"Bambu Lab H2D Pro 0.4 nozzle",
-		"Bambu Lab H2D Pro 0.6 nozzle",
-		"Bambu Lab H2D Pro 0.8 nozzle",
-		"Bambu Lab H2S 0.4 nozzle",
-		"Bambu Lab H2S 0.6 nozzle",
-		"Bambu Lab H2S 0.8 nozzle",
-		"Bambu Lab P2S 0.4 nozzle",
-		"Bambu Lab P2S 0.6 nozzle",
-		"Bambu Lab P2S 0.8 nozzle",
-		"Bambu Lab X2D 0.2 nozzle",
-		"Bambu Lab X2D 0.4 nozzle",
-		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"cool_plate_temp": [
-		"0"
-	],
-	"cool_plate_temp_initial_layer": [
-		"0"
-	],
-	"counter_coef_1": [
-		"0"
-	],
-	"counter_coef_2": [
-		"0.008"
-	],
-	"counter_coef_3": [
-		"-0.041"
-	],
-	"counter_limit_max": [
-		"0.033"
-	],
-	"counter_limit_min": [
-		"-0.035"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"diameter_limit": [
-		"50"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"70"
-	],
-	"eng_plate_temp_initial_layer": [
-		"70"
-	],
-	"fan_cooling_layer_time": [
-		"30"
-	],
-	"fan_max_speed": [
-		"90"
-	],
-	"fan_min_speed": [
-		"40"
-	],
-	"filament_adhesiveness_category": [
-		"300"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cost": [
-		"76"
-	],
-	"filament_density": [
-		"1.3"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard"
-	],
-	"filament_flow_ratio": [
-		"0.97",
-		"0.97"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"20",
-		"20"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_notes": "File Version:2.6 high reliability - V.Pack:18_05_2026",
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_scarf_gap": [
-		"0%"
-	],
-	"filament_scarf_height": [
-		"10%"
-	],
-	"filament_scarf_length": [
-		"10"
-	],
-	"filament_scarf_seam_type": [
-		"none"
-	],
-	"filament_settings_id": [
-		"addnorth PETG ESD"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-	],
-	"filament_type": [
-		"PETG"
-	],
-	"filament_vendor": [
-		"addnorth"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hole_coef_1": [
-		"0"
-	],
-	"hole_coef_2": [
-		"-0.008"
-	],
-	"hole_coef_3": [
-		"0.23415"
-	],
-	"hole_limit_max": [
-		"0.22"
-	],
-	"hole_limit_min": [
-		"0.088"
-	],
-	"hot_plate_temp": [
-		"80"
-	],
-	"hot_plate_temp_initial_layer": [
-		"80"
-	],
-	"impact_strength_z": [
-		"10"
-	],
-	"nozzle_temperature": [
-		"290",
-		"290"
-	],
-	"nozzle_temperature_initial_layer": [
-		"290",
-		"290"
-	],
-	"nozzle_temperature_range_high": [
-		"270"
-	],
-	"nozzle_temperature_range_low": [
-		"255"
-	],
-	"overhang_fan_speed": [
-		"90"
-	],
-	"overhang_fan_threshold": [
-		"10%"
-	],
-	"overhang_threshold_participating_cooling": [
-		"95%"
-	],
-	"pre_start_fan_time": [
-		"2"
-	],
-	"pressure_advance": [
-		"0.02"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"70"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"70"
-	],
-	"temperature_vitrification": [
-		"50"
-	],
-	"textured_plate_temp": [
-		"70"
-	],
-	"textured_plate_temp_initial_layer": [
-		"70"
-	],
-	"version": "2.0.0.77"
-}

resources/profiles/BBL/filament/addnorth/addnorth PETG Economy.json

@@ -1,339 +0,0 @@
-{
-	"type": "filament",
-	"name": "addnorth PETG Economy",
-	"inherits": "Generic PETG @base",
-	"from": "system",
-	"setting_id": "GF_ANGE_00",
-	"filament_id": "GF_ANGE",
-	"instantiation": "true",
-	"activate_air_filtration": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"chamber_temperatures": [
-		"0"
-	],
-	"circle_compensation_speed": [
-		"200"
-	],
-	"close_fan_the_first_x_layers": [
-		"3"
-	],
-	"compatible_printers": [
-		"Bambu Lab A1 mini 0.4 nozzle",
-		"Bambu Lab A1 mini 0.6 nozzle",
-		"Bambu Lab A1 mini 0.8 nozzle",
-		"Bambu Lab A1 0.4 nozzle",
-		"Bambu Lab A1 0.6 nozzle",
-		"Bambu Lab A1 0.8 nozzle",
-		"Bambu Lab P1P 0.4 nozzle",
-		"Bambu Lab P1P 0.6 nozzle",
-		"Bambu Lab P1P 0.8 nozzle",
-		"Bambu Lab P1S 0.4 nozzle",
-		"Bambu Lab P1S 0.6 nozzle",
-		"Bambu Lab P1S 0.8 nozzle",
-		"Bambu Lab X1 0.4 nozzle",
-		"Bambu Lab X1 0.6 nozzle",
-		"Bambu Lab X1 0.8 nozzle",
-		"Bambu Lab X1 Carbon 0.4 nozzle",
-		"Bambu Lab X1 Carbon 0.6 nozzle",
-		"Bambu Lab X1 Carbon 0.8 nozzle",
-		"Bambu Lab X1E 0.4 nozzle",
-		"Bambu Lab X1E 0.6 nozzle",
-		"Bambu Lab X1E 0.8 nozzle",
-		"Bambu Lab H2D 0.4 nozzle",
-		"Bambu Lab H2D 0.6 nozzle",
-		"Bambu Lab H2D 0.8 nozzle",
-		"Bambu Lab H2D Pro 0.4 nozzle",
-		"Bambu Lab H2D Pro 0.6 nozzle",
-		"Bambu Lab H2D Pro 0.8 nozzle",
-		"Bambu Lab H2S 0.4 nozzle",
-		"Bambu Lab H2S 0.6 nozzle",
-		"Bambu Lab H2S 0.8 nozzle",
-		"Bambu Lab P2S 0.4 nozzle",
-		"Bambu Lab P2S 0.6 nozzle",
-		"Bambu Lab P2S 0.8 nozzle",
-		"Bambu Lab X2D 0.2 nozzle",
-		"Bambu Lab X2D 0.4 nozzle",
-		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"cool_plate_temp": [
-		"0"
-	],
-	"cool_plate_temp_initial_layer": [
-		"0"
-	],
-	"counter_coef_1": [
-		"0"
-	],
-	"counter_coef_2": [
-		"0.008"
-	],
-	"counter_coef_3": [
-		"-0.041"
-	],
-	"counter_limit_max": [
-		"0.033"
-	],
-	"counter_limit_min": [
-		"-0.035"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"diameter_limit": [
-		"50"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"70"
-	],
-	"eng_plate_temp_initial_layer": [
-		"70"
-	],
-	"fan_cooling_layer_time": [
-		"30"
-	],
-	"fan_max_speed": [
-		"90"
-	],
-	"fan_min_speed": [
-		"40"
-	],
-	"filament_adhesiveness_category": [
-		"300"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cost": [
-		"27"
-	],
-	"filament_density": [
-		"1.25"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"10",
-		"10"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_notes": "File Version:2.6 - V.Pack:18_05_2026",
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_scarf_gap": [
-		"0%"
-	],
-	"filament_scarf_height": [
-		"10%"
-	],
-	"filament_scarf_length": [
-		"10"
-	],
-	"filament_scarf_seam_type": [
-		"none"
-	],
-	"filament_settings_id": [
-		"addnorth PETG Economy"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-	],
-	"filament_type": [
-		"PETG"
-	],
-	"filament_vendor": [
-		"addnorth"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hole_coef_1": [
-		"0"
-	],
-	"hole_coef_2": [
-		"-0.008"
-	],
-	"hole_coef_3": [
-		"0.23415"
-	],
-	"hole_limit_max": [
-		"0.22"
-	],
-	"hole_limit_min": [
-		"0.088"
-	],
-	"hot_plate_temp": [
-		"80"
-	],
-	"hot_plate_temp_initial_layer": [
-		"80"
-	],
-	"impact_strength_z": [
-		"10"
-	],
-	"nozzle_temperature": [
-		"260",
-		"260"
-	],
-	"nozzle_temperature_initial_layer": [
-		"255",
-		"255"
-	],
-	"nozzle_temperature_range_high": [
-		"275"
-	],
-	"nozzle_temperature_range_low": [
-		"240"
-	],
-	"overhang_fan_speed": [
-		"90"
-	],
-	"overhang_fan_threshold": [
-		"10%"
-	],
-	"overhang_threshold_participating_cooling": [
-		"95%"
-	],
-	"pre_start_fan_time": [
-		"2"
-	],
-	"pressure_advance": [
-		"0.02"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"70"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"70"
-	],
-	"temperature_vitrification": [
-		"50"
-	],
-	"textured_plate_temp": [
-		"75"
-	],
-	"textured_plate_temp_initial_layer": [
-		"75"
-	],
-	"version": "2.0.0.77"
-}

resources/profiles/BBL/filament/addnorth/addnorth PETG Flame v0.json

@@ -1,339 +0,0 @@
-{
-	"type": "filament",
-	"name": "addnorth PETG Flame v0",
-	"inherits": "Generic PETG @base",
-	"from": "system",
-	"setting_id": "GF_ANPF_00",
-	"filament_id": "GF_ANPF",
-	"instantiation": "true",
-	"activate_air_filtration": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"chamber_temperatures": [
-		"0"
-	],
-	"circle_compensation_speed": [
-		"200"
-	],
-	"close_fan_the_first_x_layers": [
-		"3"
-	],
-	"compatible_printers": [
-		"Bambu Lab A1 mini 0.4 nozzle",
-		"Bambu Lab A1 mini 0.6 nozzle",
-		"Bambu Lab A1 mini 0.8 nozzle",
-		"Bambu Lab A1 0.4 nozzle",
-		"Bambu Lab A1 0.6 nozzle",
-		"Bambu Lab A1 0.8 nozzle",
-		"Bambu Lab P1P 0.4 nozzle",
-		"Bambu Lab P1P 0.6 nozzle",
-		"Bambu Lab P1P 0.8 nozzle",
-		"Bambu Lab P1S 0.4 nozzle",
-		"Bambu Lab P1S 0.6 nozzle",
-		"Bambu Lab P1S 0.8 nozzle",
-		"Bambu Lab X1 0.4 nozzle",
-		"Bambu Lab X1 0.6 nozzle",
-		"Bambu Lab X1 0.8 nozzle",
-		"Bambu Lab X1 Carbon 0.4 nozzle",
-		"Bambu Lab X1 Carbon 0.6 nozzle",
-		"Bambu Lab X1 Carbon 0.8 nozzle",
-		"Bambu Lab X1E 0.4 nozzle",
-		"Bambu Lab X1E 0.6 nozzle",
-		"Bambu Lab X1E 0.8 nozzle",
-		"Bambu Lab H2D 0.4 nozzle",
-		"Bambu Lab H2D 0.6 nozzle",
-		"Bambu Lab H2D 0.8 nozzle",
-		"Bambu Lab H2D Pro 0.4 nozzle",
-		"Bambu Lab H2D Pro 0.6 nozzle",
-		"Bambu Lab H2D Pro 0.8 nozzle",
-		"Bambu Lab H2S 0.4 nozzle",
-		"Bambu Lab H2S 0.6 nozzle",
-		"Bambu Lab H2S 0.8 nozzle",
-		"Bambu Lab P2S 0.4 nozzle",
-		"Bambu Lab P2S 0.6 nozzle",
-		"Bambu Lab P2S 0.8 nozzle",
-		"Bambu Lab X2D 0.2 nozzle",
-		"Bambu Lab X2D 0.4 nozzle",
-		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"cool_plate_temp": [
-		"0"
-	],
-	"cool_plate_temp_initial_layer": [
-		"0"
-	],
-	"counter_coef_1": [
-		"0"
-	],
-	"counter_coef_2": [
-		"0.008"
-	],
-	"counter_coef_3": [
-		"-0.041"
-	],
-	"counter_limit_max": [
-		"0.033"
-	],
-	"counter_limit_min": [
-		"-0.035"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"diameter_limit": [
-		"50"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"70"
-	],
-	"eng_plate_temp_initial_layer": [
-		"70"
-	],
-	"fan_cooling_layer_time": [
-		"30"
-	],
-	"fan_max_speed": [
-		"90"
-	],
-	"fan_min_speed": [
-		"40"
-	],
-	"filament_adhesiveness_category": [
-		"300"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cost": [
-		"71"
-	],
-	"filament_density": [
-		"1.27"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard"
-	],
-	"filament_flow_ratio": [
-		"0.97",
-		"0.97"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"20",
-		"20"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_notes": "File Version:2.4 high reliability - V.Pack:18_05_2026",
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_scarf_gap": [
-		"0%"
-	],
-	"filament_scarf_height": [
-		"10%"
-	],
-	"filament_scarf_length": [
-		"10"
-	],
-	"filament_scarf_seam_type": [
-		"none"
-	],
-	"filament_settings_id": [
-		"addnorth PETG Flame V0"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-	],
-	"filament_type": [
-		"PETG"
-	],
-	"filament_vendor": [
-		"addnorth"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hole_coef_1": [
-		"0"
-	],
-	"hole_coef_2": [
-		"-0.008"
-	],
-	"hole_coef_3": [
-		"0.23415"
-	],
-	"hole_limit_max": [
-		"0.22"
-	],
-	"hole_limit_min": [
-		"0.088"
-	],
-	"hot_plate_temp": [
-		"80"
-	],
-	"hot_plate_temp_initial_layer": [
-		"80"
-	],
-	"impact_strength_z": [
-		"10"
-	],
-	"nozzle_temperature": [
-		"290",
-		"290"
-	],
-	"nozzle_temperature_initial_layer": [
-		"290",
-		"290"
-	],
-	"nozzle_temperature_range_high": [
-		"270"
-	],
-	"nozzle_temperature_range_low": [
-		"255"
-	],
-	"overhang_fan_speed": [
-		"90"
-	],
-	"overhang_fan_threshold": [
-		"10%"
-	],
-	"overhang_threshold_participating_cooling": [
-		"95%"
-	],
-	"pre_start_fan_time": [
-		"2"
-	],
-	"pressure_advance": [
-		"0.02"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"70"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"70"
-	],
-	"temperature_vitrification": [
-		"50"
-	],
-	"textured_plate_temp": [
-		"70"
-	],
-	"textured_plate_temp_initial_layer": [
-		"70"
-	],
-	"version": "2.0.0.77"
-}

resources/profiles/BBL/filament/addnorth/addnorth PETG PRO Matte.json

@@ -1,339 +0,0 @@
-{
-	"type": "filament",
-	"name": "addnorth PETG PRO Matte",
-	"inherits": "Generic PETG @base",
-	"from": "system",
-	"setting_id": "GF_ANPM_00",
-	"filament_id": "GF_ANPM",
-	"instantiation": "true",
-	"activate_air_filtration": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"chamber_temperatures": [
-		"0"
-	],
-	"circle_compensation_speed": [
-		"200"
-	],
-	"close_fan_the_first_x_layers": [
-		"3"
-	],
-	"compatible_printers": [
-		"Bambu Lab A1 mini 0.4 nozzle",
-		"Bambu Lab A1 mini 0.6 nozzle",
-		"Bambu Lab A1 mini 0.8 nozzle",
-		"Bambu Lab A1 0.4 nozzle",
-		"Bambu Lab A1 0.6 nozzle",
-		"Bambu Lab A1 0.8 nozzle",
-		"Bambu Lab P1P 0.4 nozzle",
-		"Bambu Lab P1P 0.6 nozzle",
-		"Bambu Lab P1P 0.8 nozzle",
-		"Bambu Lab P1S 0.4 nozzle",
-		"Bambu Lab P1S 0.6 nozzle",
-		"Bambu Lab P1S 0.8 nozzle",
-		"Bambu Lab X1 0.4 nozzle",
-		"Bambu Lab X1 0.6 nozzle",
-		"Bambu Lab X1 0.8 nozzle",
-		"Bambu Lab X1 Carbon 0.4 nozzle",
-		"Bambu Lab X1 Carbon 0.6 nozzle",
-		"Bambu Lab X1 Carbon 0.8 nozzle",
-		"Bambu Lab X1E 0.4 nozzle",
-		"Bambu Lab X1E 0.6 nozzle",
-		"Bambu Lab X1E 0.8 nozzle",
-		"Bambu Lab H2D 0.4 nozzle",
-		"Bambu Lab H2D 0.6 nozzle",
-		"Bambu Lab H2D 0.8 nozzle",
-		"Bambu Lab H2D Pro 0.4 nozzle",
-		"Bambu Lab H2D Pro 0.6 nozzle",
-		"Bambu Lab H2D Pro 0.8 nozzle",
-		"Bambu Lab H2S 0.4 nozzle",
-		"Bambu Lab H2S 0.6 nozzle",
-		"Bambu Lab H2S 0.8 nozzle",
-		"Bambu Lab P2S 0.4 nozzle",
-		"Bambu Lab P2S 0.6 nozzle",
-		"Bambu Lab P2S 0.8 nozzle",
-		"Bambu Lab X2D 0.2 nozzle",
-		"Bambu Lab X2D 0.4 nozzle",
-		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"cool_plate_temp": [
-		"0"
-	],
-	"cool_plate_temp_initial_layer": [
-		"0"
-	],
-	"counter_coef_1": [
-		"0"
-	],
-	"counter_coef_2": [
-		"0.008"
-	],
-	"counter_coef_3": [
-		"-0.041"
-	],
-	"counter_limit_max": [
-		"0.033"
-	],
-	"counter_limit_min": [
-		"-0.035"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"diameter_limit": [
-		"50"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"70"
-	],
-	"eng_plate_temp_initial_layer": [
-		"70"
-	],
-	"fan_cooling_layer_time": [
-		"30"
-	],
-	"fan_max_speed": [
-		"90"
-	],
-	"fan_min_speed": [
-		"40"
-	],
-	"filament_adhesiveness_category": [
-		"300"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cost": [
-		"54.5"
-	],
-	"filament_density": [
-		"1.27"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"8",
-		"8"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_notes": "File Version:2.6 - V.Pack:18_05_2026",
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_scarf_gap": [
-		"0%"
-	],
-	"filament_scarf_height": [
-		"10%"
-	],
-	"filament_scarf_length": [
-		"10"
-	],
-	"filament_scarf_seam_type": [
-		"none"
-	],
-	"filament_settings_id": [
-		"addnorth PETG PRO Matte"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-	],
-	"filament_type": [
-		"PETG"
-	],
-	"filament_vendor": [
-		"addnorth"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hole_coef_1": [
-		"0"
-	],
-	"hole_coef_2": [
-		"-0.008"
-	],
-	"hole_coef_3": [
-		"0.23415"
-	],
-	"hole_limit_max": [
-		"0.22"
-	],
-	"hole_limit_min": [
-		"0.088"
-	],
-	"hot_plate_temp": [
-		"80"
-	],
-	"hot_plate_temp_initial_layer": [
-		"80"
-	],
-	"impact_strength_z": [
-		"10"
-	],
-	"nozzle_temperature": [
-		"260",
-		"260"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"nozzle_temperature_range_high": [
-		"275"
-	],
-	"nozzle_temperature_range_low": [
-		"235"
-	],
-	"overhang_fan_speed": [
-		"90"
-	],
-	"overhang_fan_threshold": [
-		"10%"
-	],
-	"overhang_threshold_participating_cooling": [
-		"95%"
-	],
-	"pre_start_fan_time": [
-		"1"
-	],
-	"pressure_advance": [
-		"0.02"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"70"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"70"
-	],
-	"temperature_vitrification": [
-		"50"
-	],
-	"textured_plate_temp": [
-		"80"
-	],
-	"textured_plate_temp_initial_layer": [
-		"80"
-	],
-	"version": "2.0.0.77"
-}

resources/profiles/BBL/filament/addnorth/addnorth PETG rPETG Matte.json

@@ -1,339 +0,0 @@
-{
-	"type": "filament",
-	"name": "addnorth PETG rPETG Matte",
-	"inherits": "Generic PETG @base",
-	"from": "system",
-	"setting_id": "GF_ANRM_00",
-	"filament_id": "GF_ANRM",
-	"instantiation": "true",
-	"activate_air_filtration": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"chamber_temperatures": [
-		"0"
-	],
-	"circle_compensation_speed": [
-		"200"
-	],
-	"close_fan_the_first_x_layers": [
-		"3"
-	],
-	"compatible_printers": [
-		"Bambu Lab A1 mini 0.4 nozzle",
-		"Bambu Lab A1 mini 0.6 nozzle",
-		"Bambu Lab A1 mini 0.8 nozzle",
-		"Bambu Lab A1 0.4 nozzle",
-		"Bambu Lab A1 0.6 nozzle",
-		"Bambu Lab A1 0.8 nozzle",
-		"Bambu Lab P1P 0.4 nozzle",
-		"Bambu Lab P1P 0.6 nozzle",
-		"Bambu Lab P1P 0.8 nozzle",
-		"Bambu Lab P1S 0.4 nozzle",
-		"Bambu Lab P1S 0.6 nozzle",
-		"Bambu Lab P1S 0.8 nozzle",
-		"Bambu Lab X1 0.4 nozzle",
-		"Bambu Lab X1 0.6 nozzle",
-		"Bambu Lab X1 0.8 nozzle",
-		"Bambu Lab X1 Carbon 0.4 nozzle",
-		"Bambu Lab X1 Carbon 0.6 nozzle",
-		"Bambu Lab X1 Carbon 0.8 nozzle",
-		"Bambu Lab X1E 0.4 nozzle",
-		"Bambu Lab X1E 0.6 nozzle",
-		"Bambu Lab X1E 0.8 nozzle",
-		"Bambu Lab H2D 0.4 nozzle",
-		"Bambu Lab H2D 0.6 nozzle",
-		"Bambu Lab H2D 0.8 nozzle",
-		"Bambu Lab H2D Pro 0.4 nozzle",
-		"Bambu Lab H2D Pro 0.6 nozzle",
-		"Bambu Lab H2D Pro 0.8 nozzle",
-		"Bambu Lab H2S 0.4 nozzle",
-		"Bambu Lab H2S 0.6 nozzle",
-		"Bambu Lab H2S 0.8 nozzle",
-		"Bambu Lab P2S 0.4 nozzle",
-		"Bambu Lab P2S 0.6 nozzle",
-		"Bambu Lab P2S 0.8 nozzle",
-		"Bambu Lab X2D 0.2 nozzle",
-		"Bambu Lab X2D 0.4 nozzle",
-		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"cool_plate_temp": [
-		"0"
-	],
-	"cool_plate_temp_initial_layer": [
-		"0"
-	],
-	"counter_coef_1": [
-		"0"
-	],
-	"counter_coef_2": [
-		"0.008"
-	],
-	"counter_coef_3": [
-		"-0.041"
-	],
-	"counter_limit_max": [
-		"0.033"
-	],
-	"counter_limit_min": [
-		"-0.035"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"diameter_limit": [
-		"50"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"70"
-	],
-	"eng_plate_temp_initial_layer": [
-		"70"
-	],
-	"fan_cooling_layer_time": [
-		"30"
-	],
-	"fan_max_speed": [
-		"90"
-	],
-	"fan_min_speed": [
-		"40"
-	],
-	"filament_adhesiveness_category": [
-		"300"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cost": [
-		"36"
-	],
-	"filament_density": [
-		"1.27"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"10",
-		"10"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_notes": "File Version:2.6 - V.Pack:18_05_2026",
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_scarf_gap": [
-		"0%"
-	],
-	"filament_scarf_height": [
-		"10%"
-	],
-	"filament_scarf_length": [
-		"10"
-	],
-	"filament_scarf_seam_type": [
-		"none"
-	],
-	"filament_settings_id": [
-		"addnorth PETG rPETG Matte"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-	],
-	"filament_type": [
-		"PETG"
-	],
-	"filament_vendor": [
-		"addnorth"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hole_coef_1": [
-		"0"
-	],
-	"hole_coef_2": [
-		"-0.008"
-	],
-	"hole_coef_3": [
-		"0.23415"
-	],
-	"hole_limit_max": [
-		"0.22"
-	],
-	"hole_limit_min": [
-		"0.088"
-	],
-	"hot_plate_temp": [
-		"80"
-	],
-	"hot_plate_temp_initial_layer": [
-		"80"
-	],
-	"impact_strength_z": [
-		"10"
-	],
-	"nozzle_temperature": [
-		"260",
-		"260"
-	],
-	"nozzle_temperature_initial_layer": [
-		"255",
-		"255"
-	],
-	"nozzle_temperature_range_high": [
-		"260"
-	],
-	"nozzle_temperature_range_low": [
-		"225"
-	],
-	"overhang_fan_speed": [
-		"90"
-	],
-	"overhang_fan_threshold": [
-		"10%"
-	],
-	"overhang_threshold_participating_cooling": [
-		"95%"
-	],
-	"pre_start_fan_time": [
-		"2"
-	],
-	"pressure_advance": [
-		"0.02"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"70"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"70"
-	],
-	"temperature_vitrification": [
-		"50"
-	],
-	"textured_plate_temp": [
-		"75"
-	],
-	"textured_plate_temp_initial_layer": [
-		"75"
-	],
-	"version": "2.0.0.77"
-}

resources/profiles/BBL/filament/addnorth/addnorth PETG-CF Rigid X.json

@@ -1,339 +0,0 @@
-{
-	"type": "filament",
-	"name": "addnorth PETG-CF Rigid X",
-	"inherits": "Generic PETG-CF @base",
-	"from": "system",
-	"setting_id": "GF_ANRX_00",
-	"filament_id": "GF_ANRX",
-	"instantiation": "true",
-	"activate_air_filtration": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"100"
-	],
-	"chamber_temperatures": [
-		"0"
-	],
-	"circle_compensation_speed": [
-		"200"
-	],
-	"close_fan_the_first_x_layers": [
-		"3"
-	],
-	"compatible_printers": [
-		"Bambu Lab A1 mini 0.4 nozzle",
-		"Bambu Lab A1 mini 0.6 nozzle",
-		"Bambu Lab A1 mini 0.8 nozzle",
-		"Bambu Lab A1 0.4 nozzle",
-		"Bambu Lab A1 0.6 nozzle",
-		"Bambu Lab A1 0.8 nozzle",
-		"Bambu Lab P1P 0.4 nozzle",
-		"Bambu Lab P1P 0.6 nozzle",
-		"Bambu Lab P1P 0.8 nozzle",
-		"Bambu Lab P1S 0.4 nozzle",
-		"Bambu Lab P1S 0.6 nozzle",
-		"Bambu Lab P1S 0.8 nozzle",
-		"Bambu Lab X1 0.4 nozzle",
-		"Bambu Lab X1 0.6 nozzle",
-		"Bambu Lab X1 0.8 nozzle",
-		"Bambu Lab X1 Carbon 0.4 nozzle",
-		"Bambu Lab X1 Carbon 0.6 nozzle",
-		"Bambu Lab X1 Carbon 0.8 nozzle",
-		"Bambu Lab X1E 0.4 nozzle",
-		"Bambu Lab X1E 0.6 nozzle",
-		"Bambu Lab X1E 0.8 nozzle",
-		"Bambu Lab H2D 0.4 nozzle",
-		"Bambu Lab H2D 0.6 nozzle",
-		"Bambu Lab H2D 0.8 nozzle",
-		"Bambu Lab H2D Pro 0.4 nozzle",
-		"Bambu Lab H2D Pro 0.6 nozzle",
-		"Bambu Lab H2D Pro 0.8 nozzle",
-		"Bambu Lab H2S 0.4 nozzle",
-		"Bambu Lab H2S 0.6 nozzle",
-		"Bambu Lab H2S 0.8 nozzle",
-		"Bambu Lab P2S 0.4 nozzle",
-		"Bambu Lab P2S 0.6 nozzle",
-		"Bambu Lab P2S 0.8 nozzle",
-		"Bambu Lab X2D 0.2 nozzle",
-		"Bambu Lab X2D 0.4 nozzle",
-		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"cool_plate_temp": [
-		"0"
-	],
-	"cool_plate_temp_initial_layer": [
-		"0"
-	],
-	"counter_coef_1": [
-		"0"
-	],
-	"counter_coef_2": [
-		"0.008"
-	],
-	"counter_coef_3": [
-		"-0.041"
-	],
-	"counter_limit_max": [
-		"0.033"
-	],
-	"counter_limit_min": [
-		"-0.035"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"diameter_limit": [
-		"50"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"70"
-	],
-	"eng_plate_temp_initial_layer": [
-		"70"
-	],
-	"fan_cooling_layer_time": [
-		"30"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"5"
-	],
-	"filament_adhesiveness_category": [
-		"300"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cost": [
-		"82"
-	],
-	"filament_density": [
-		"1.3"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"8",
-		"11"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_notes": "File Version:2.6 - V.Pack:18_05_2026 – Special thanks to Mats.Z (3DP24, Jonkoping University / Campus Varnamo) for profile improvements during internship autumn 2025.",
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_scarf_gap": [
-		"0%"
-	],
-	"filament_scarf_height": [
-		"10%"
-	],
-	"filament_scarf_length": [
-		"10"
-	],
-	"filament_scarf_seam_type": [
-		"none"
-	],
-	"filament_settings_id": [
-		"addnorth PETG-CF Rigid X"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-	],
-	"filament_type": [
-		"PETG-CF"
-	],
-	"filament_vendor": [
-		"addnorth"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"0.4",
-		"0.4"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hole_coef_1": [
-		"0"
-	],
-	"hole_coef_2": [
-		"-0.008"
-	],
-	"hole_coef_3": [
-		"0.23415"
-	],
-	"hole_limit_max": [
-		"0.22"
-	],
-	"hole_limit_min": [
-		"0.088"
-	],
-	"hot_plate_temp": [
-		"80"
-	],
-	"hot_plate_temp_initial_layer": [
-		"80"
-	],
-	"impact_strength_z": [
-		"10"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_range_high": [
-		"275"
-	],
-	"nozzle_temperature_range_low": [
-		"245"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"10%"
-	],
-	"overhang_threshold_participating_cooling": [
-		"95%"
-	],
-	"pre_start_fan_time": [
-		"0"
-	],
-	"pressure_advance": [
-		"0.02"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"40"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"6"
-	],
-	"slow_down_min_speed": [
-		"40"
-	],
-	"supertack_plate_temp": [
-		"70"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"70"
-	],
-	"temperature_vitrification": [
-		"50"
-	],
-	"textured_plate_temp": [
-		"80"
-	],
-	"textured_plate_temp_initial_layer": [
-		"80"
-	],
-	"version": "2.0.0.77"
-}

resources/profiles/BBL/filament/addnorth/addnorth PLA E-PLA.json

@@ -1,339 +0,0 @@
-{
-	"type": "filament",
-	"name": "addnorth PLA E-PLA",
-	"inherits": "Generic PLA @base",
-	"from": "system",
-	"setting_id": "GF_ANEP_00",
-	"filament_id": "GF_ANEP",
-	"instantiation": "true",
-	"activate_air_filtration": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"70"
-	],
-	"chamber_temperatures": [
-		"0"
-	],
-	"circle_compensation_speed": [
-		"200"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers": [
-		"Bambu Lab A1 mini 0.4 nozzle",
-		"Bambu Lab A1 mini 0.6 nozzle",
-		"Bambu Lab A1 mini 0.8 nozzle",
-		"Bambu Lab A1 0.4 nozzle",
-		"Bambu Lab A1 0.6 nozzle",
-		"Bambu Lab A1 0.8 nozzle",
-		"Bambu Lab P1P 0.4 nozzle",
-		"Bambu Lab P1P 0.6 nozzle",
-		"Bambu Lab P1P 0.8 nozzle",
-		"Bambu Lab P1S 0.4 nozzle",
-		"Bambu Lab P1S 0.6 nozzle",
-		"Bambu Lab P1S 0.8 nozzle",
-		"Bambu Lab X1 0.4 nozzle",
-		"Bambu Lab X1 0.6 nozzle",
-		"Bambu Lab X1 0.8 nozzle",
-		"Bambu Lab X1 Carbon 0.4 nozzle",
-		"Bambu Lab X1 Carbon 0.6 nozzle",
-		"Bambu Lab X1 Carbon 0.8 nozzle",
-		"Bambu Lab X1E 0.4 nozzle",
-		"Bambu Lab X1E 0.6 nozzle",
-		"Bambu Lab X1E 0.8 nozzle",
-		"Bambu Lab H2D 0.4 nozzle",
-		"Bambu Lab H2D 0.6 nozzle",
-		"Bambu Lab H2D 0.8 nozzle",
-		"Bambu Lab H2D Pro 0.4 nozzle",
-		"Bambu Lab H2D Pro 0.6 nozzle",
-		"Bambu Lab H2D Pro 0.8 nozzle",
-		"Bambu Lab H2S 0.4 nozzle",
-		"Bambu Lab H2S 0.6 nozzle",
-		"Bambu Lab H2S 0.8 nozzle",
-		"Bambu Lab P2S 0.4 nozzle",
-		"Bambu Lab P2S 0.6 nozzle",
-		"Bambu Lab P2S 0.8 nozzle",
-		"Bambu Lab X2D 0.2 nozzle",
-		"Bambu Lab X2D 0.4 nozzle",
-		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"cool_plate_temp": [
-		"55"
-	],
-	"cool_plate_temp_initial_layer": [
-		"5"
-	],
-	"counter_coef_1": [
-		"0"
-	],
-	"counter_coef_2": [
-		"0.008"
-	],
-	"counter_coef_3": [
-		"-0.041"
-	],
-	"counter_limit_max": [
-		"0.033"
-	],
-	"counter_limit_min": [
-		"-0.035"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"diameter_limit": [
-		"50"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"filament_adhesiveness_category": [
-		"100"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_density": [
-		"1.24"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard"
-	],
-	"filament_flow_ratio": [
-		"0.98",
-		"0.98"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"12",
-		"12"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_notes": "File Version:2.7 - V.Pack:18_05_2026",
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_scarf_gap": [
-		"15%"
-	],
-	"filament_scarf_height": [
-		"10%"
-	],
-	"filament_scarf_length": [
-		"10"
-	],
-	"filament_scarf_seam_type": [
-		"none"
-	],
-	"filament_settings_id": [
-		"addnorth PLA E-PLA"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode {if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200 {elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150 {elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50 {endif} {if activate_air_filtration[current_extruder] && support_air_filtration} M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} {endif}"
-	],
-	"filament_type": [
-		"PLA"
-	],
-	"filament_vendor": [
-		"addnorth"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hole_coef_1": [
-		"0"
-	],
-	"hole_coef_2": [
-		"-0.008"
-	],
-	"hole_coef_3": [
-		"0.23415"
-	],
-	"hole_limit_max": [
-		"0.22"
-	],
-	"hole_limit_min": [
-		"0.088"
-	],
-	"hot_plate_temp": [
-		"55"
-	],
-	"hot_plate_temp_initial_layer": [
-		"55"
-	],
-	"impact_strength_z": [
-		"10"
-	],
-	"nozzle_temperature": [
-		"240",
-		"240"
-	],
-	"nozzle_temperature_initial_layer": [
-		"235",
-		"235"
-	],
-	"nozzle_temperature_range_high": [
-		"240"
-	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"overhang_threshold_participating_cooling": [
-		"95%"
-	],
-	"pre_start_fan_time": [
-		"2"
-	],
-	"pressure_advance": [
-		"0.02"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"45"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"45"
-	],
-	"temperature_vitrification": [
-		"50"
-	],
-	"textured_plate_temp": [
-		"65"
-	],
-	"textured_plate_temp_initial_layer": [
-		"65"
-	],
-	"version": "2.0.0.77"
-}

resources/profiles/BBL/filament/addnorth/addnorth PLA Economy.json

@@ -1,339 +0,0 @@
-{
-	"type": "filament",
-	"name": "addnorth PLA Economy",
-	"inherits": "Generic PLA @base",
-	"from": "system",
-	"setting_id": "GF_ANPL_00",
-	"filament_id": "GF_ANPL",
-	"instantiation": "true",
-	"activate_air_filtration": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"70"
-	],
-	"chamber_temperatures": [
-		"0"
-	],
-	"circle_compensation_speed": [
-		"200"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers": [
-		"Bambu Lab A1 mini 0.4 nozzle",
-		"Bambu Lab A1 mini 0.6 nozzle",
-		"Bambu Lab A1 mini 0.8 nozzle",
-		"Bambu Lab A1 0.4 nozzle",
-		"Bambu Lab A1 0.6 nozzle",
-		"Bambu Lab A1 0.8 nozzle",
-		"Bambu Lab P1P 0.4 nozzle",
-		"Bambu Lab P1P 0.6 nozzle",
-		"Bambu Lab P1P 0.8 nozzle",
-		"Bambu Lab P1S 0.4 nozzle",
-		"Bambu Lab P1S 0.6 nozzle",
-		"Bambu Lab P1S 0.8 nozzle",
-		"Bambu Lab X1 0.4 nozzle",
-		"Bambu Lab X1 0.6 nozzle",
-		"Bambu Lab X1 0.8 nozzle",
-		"Bambu Lab X1 Carbon 0.4 nozzle",
-		"Bambu Lab X1 Carbon 0.6 nozzle",
-		"Bambu Lab X1 Carbon 0.8 nozzle",
-		"Bambu Lab X1E 0.4 nozzle",
-		"Bambu Lab X1E 0.6 nozzle",
-		"Bambu Lab X1E 0.8 nozzle",
-		"Bambu Lab H2D 0.4 nozzle",
-		"Bambu Lab H2D 0.6 nozzle",
-		"Bambu Lab H2D 0.8 nozzle",
-		"Bambu Lab H2D Pro 0.4 nozzle",
-		"Bambu Lab H2D Pro 0.6 nozzle",
-		"Bambu Lab H2D Pro 0.8 nozzle",
-		"Bambu Lab H2S 0.4 nozzle",
-		"Bambu Lab H2S 0.6 nozzle",
-		"Bambu Lab H2S 0.8 nozzle",
-		"Bambu Lab P2S 0.4 nozzle",
-		"Bambu Lab P2S 0.6 nozzle",
-		"Bambu Lab P2S 0.8 nozzle",
-		"Bambu Lab X2D 0.2 nozzle",
-		"Bambu Lab X2D 0.4 nozzle",
-		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"cool_plate_temp": [
-		"55"
-	],
-	"cool_plate_temp_initial_layer": [
-		"55"
-	],
-	"counter_coef_1": [
-		"0"
-	],
-	"counter_coef_2": [
-		"0.008"
-	],
-	"counter_coef_3": [
-		"-0.041"
-	],
-	"counter_limit_max": [
-		"0.033"
-	],
-	"counter_limit_min": [
-		"-0.035"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"diameter_limit": [
-		"50"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"filament_adhesiveness_category": [
-		"100"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cost": [
-		"23"
-	],
-	"filament_density": [
-		"1.24"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard"
-	],
-	"filament_flow_ratio": [
-		"0.98",
-		"0.98"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"12",
-		"12"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_notes": "File Version:2.6 - V.Pack:18_05_2026",
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_scarf_gap": [
-		"15%"
-	],
-	"filament_scarf_height": [
-		"10%"
-	],
-	"filament_scarf_length": [
-		"10"
-	],
-	"filament_scarf_seam_type": [
-		"none"
-	],
-	"filament_settings_id": [
-		"addnorth PLA Economy"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode {if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200 {elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150 {elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50 {endif} {if activate_air_filtration[current_extruder] && support_air_filtration} M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} {endif}"
-	],
-	"filament_type": [
-		"PLA"
-	],
-	"filament_vendor": [
-		"addnorth"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hole_coef_1": [
-		"0"
-	],
-	"hole_coef_2": [
-		"-0.008"
-	],
-	"hole_coef_3": [
-		"0.23415"
-	],
-	"hole_limit_max": [
-		"0.22"
-	],
-	"hole_limit_min": [
-		"0.088"
-	],
-	"hot_plate_temp": [
-		"60"
-	],
-	"hot_plate_temp_initial_layer": [
-		"60"
-	],
-	"impact_strength_z": [
-		"10"
-	],
-	"nozzle_temperature": [
-		"240",
-		"240"
-	],
-	"nozzle_temperature_initial_layer": [
-		"235",
-		"235"
-	],
-	"nozzle_temperature_range_high": [
-		"240"
-	],
-	"nozzle_temperature_range_low": [
-		"200"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"25%"
-	],
-	"overhang_threshold_participating_cooling": [
-		"95%"
-	],
-	"pre_start_fan_time": [
-		"2"
-	],
-	"pressure_advance": [
-		"0.02"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"45"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"45"
-	],
-	"temperature_vitrification": [
-		"50"
-	],
-	"textured_plate_temp": [
-		"65"
-	],
-	"textured_plate_temp_initial_layer": [
-		"65"
-	],
-	"version": "2.0.0.77"
-}

resources/profiles/BBL/filament/addnorth/addnorth PLA HT-PLA PRO Matte.json

@@ -1,339 +0,0 @@
-{
-	"type": "filament",
-	"name": "addnorth PLA HT-PLA PRO Matte",
-	"inherits": "Generic PLA @base",
-	"from": "system",
-	"setting_id": "GF_ANHTP_00",
-	"filament_id": "GF_ANHTP",
-	"instantiation": "true",
-	"activate_air_filtration": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"70"
-	],
-	"chamber_temperatures": [
-		"0"
-	],
-	"circle_compensation_speed": [
-		"200"
-	],
-	"close_fan_the_first_x_layers": [
-		"2"
-	],
-	"compatible_printers": [
-		"Bambu Lab A1 mini 0.4 nozzle",
-		"Bambu Lab A1 mini 0.6 nozzle",
-		"Bambu Lab A1 mini 0.8 nozzle",
-		"Bambu Lab A1 0.4 nozzle",
-		"Bambu Lab A1 0.6 nozzle",
-		"Bambu Lab A1 0.8 nozzle",
-		"Bambu Lab P1P 0.4 nozzle",
-		"Bambu Lab P1P 0.6 nozzle",
-		"Bambu Lab P1P 0.8 nozzle",
-		"Bambu Lab P1S 0.4 nozzle",
-		"Bambu Lab P1S 0.6 nozzle",
-		"Bambu Lab P1S 0.8 nozzle",
-		"Bambu Lab X1 0.4 nozzle",
-		"Bambu Lab X1 0.6 nozzle",
-		"Bambu Lab X1 0.8 nozzle",
-		"Bambu Lab X1 Carbon 0.4 nozzle",
-		"Bambu Lab X1 Carbon 0.6 nozzle",
-		"Bambu Lab X1 Carbon 0.8 nozzle",
-		"Bambu Lab X1E 0.4 nozzle",
-		"Bambu Lab X1E 0.6 nozzle",
-		"Bambu Lab X1E 0.8 nozzle",
-		"Bambu Lab H2D 0.4 nozzle",
-		"Bambu Lab H2D 0.6 nozzle",
-		"Bambu Lab H2D 0.8 nozzle",
-		"Bambu Lab H2D Pro 0.4 nozzle",
-		"Bambu Lab H2D Pro 0.6 nozzle",
-		"Bambu Lab H2D Pro 0.8 nozzle",
-		"Bambu Lab H2S 0.4 nozzle",
-		"Bambu Lab H2S 0.6 nozzle",
-		"Bambu Lab H2S 0.8 nozzle",
-		"Bambu Lab P2S 0.4 nozzle",
-		"Bambu Lab P2S 0.6 nozzle",
-		"Bambu Lab P2S 0.8 nozzle",
-		"Bambu Lab X2D 0.2 nozzle",
-		"Bambu Lab X2D 0.4 nozzle",
-		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"cool_plate_temp": [
-		"55"
-	],
-	"cool_plate_temp_initial_layer": [
-		"55"
-	],
-	"counter_coef_1": [
-		"0"
-	],
-	"counter_coef_2": [
-		"0.008"
-	],
-	"counter_coef_3": [
-		"-0.041"
-	],
-	"counter_limit_max": [
-		"0.033"
-	],
-	"counter_limit_min": [
-		"-0.035"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"diameter_limit": [
-		"50"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"filament_adhesiveness_category": [
-		"100"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cost": [
-		"55"
-	],
-	"filament_density": [
-		"1.4"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard"
-	],
-	"filament_flow_ratio": [
-		"0.98",
-		"0.98"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"8",
-		"11"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_notes": "File Version:2.6 - V.Pack:18_05_2026",
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_scarf_gap": [
-		"15%"
-	],
-	"filament_scarf_height": [
-		"10%"
-	],
-	"filament_scarf_length": [
-		"10"
-	],
-	"filament_scarf_seam_type": [
-		"none"
-	],
-	"filament_settings_id": [
-		"addnorth PLA HT-PLA PRO Matte"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode {if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200 {elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150 {elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50 {endif} {if activate_air_filtration[current_extruder] && support_air_filtration} M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} {endif}"
-	],
-	"filament_type": [
-		"PLA"
-	],
-	"filament_vendor": [
-		"addnorth"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hole_coef_1": [
-		"0"
-	],
-	"hole_coef_2": [
-		"-0.008"
-	],
-	"hole_coef_3": [
-		"0.23415"
-	],
-	"hole_limit_max": [
-		"0.22"
-	],
-	"hole_limit_min": [
-		"0.088"
-	],
-	"hot_plate_temp": [
-		"70"
-	],
-	"hot_plate_temp_initial_layer": [
-		"70"
-	],
-	"impact_strength_z": [
-		"10"
-	],
-	"nozzle_temperature": [
-		"240",
-		"240"
-	],
-	"nozzle_temperature_initial_layer": [
-		"235",
-		"235"
-	],
-	"nozzle_temperature_range_high": [
-		"245"
-	],
-	"nozzle_temperature_range_low": [
-		"210"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"overhang_threshold_participating_cooling": [
-		"95%"
-	],
-	"pre_start_fan_time": [
-		"2"
-	],
-	"pressure_advance": [
-		"0.02"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"45"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"45"
-	],
-	"temperature_vitrification": [
-		"50"
-	],
-	"textured_plate_temp": [
-		"75"
-	],
-	"textured_plate_temp_initial_layer": [
-		"75"
-	],
-	"version": "2.0.0.77"
-}

resources/profiles/BBL/filament/addnorth/addnorth PLA Premium Silk.json

@@ -1,339 +0,0 @@
-{
-	"type": "filament",
-	"name": "addnorth PLA Premium Silk",
-	"inherits": "Generic PLA Silk @base",
-	"from": "system",
-	"setting_id": "GF_ANPS_00",
-	"filament_id": "GF_ANPS",
-	"instantiation": "true",
-	"activate_air_filtration": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"50"
-	],
-	"chamber_temperatures": [
-		"0"
-	],
-	"circle_compensation_speed": [
-		"200"
-	],
-	"close_fan_the_first_x_layers": [
-		"2"
-	],
-	"compatible_printers": [
-		"Bambu Lab A1 mini 0.4 nozzle",
-		"Bambu Lab A1 mini 0.6 nozzle",
-		"Bambu Lab A1 mini 0.8 nozzle",
-		"Bambu Lab A1 0.4 nozzle",
-		"Bambu Lab A1 0.6 nozzle",
-		"Bambu Lab A1 0.8 nozzle",
-		"Bambu Lab P1P 0.4 nozzle",
-		"Bambu Lab P1P 0.6 nozzle",
-		"Bambu Lab P1P 0.8 nozzle",
-		"Bambu Lab P1S 0.4 nozzle",
-		"Bambu Lab P1S 0.6 nozzle",
-		"Bambu Lab P1S 0.8 nozzle",
-		"Bambu Lab X1 0.4 nozzle",
-		"Bambu Lab X1 0.6 nozzle",
-		"Bambu Lab X1 0.8 nozzle",
-		"Bambu Lab X1 Carbon 0.4 nozzle",
-		"Bambu Lab X1 Carbon 0.6 nozzle",
-		"Bambu Lab X1 Carbon 0.8 nozzle",
-		"Bambu Lab X1E 0.4 nozzle",
-		"Bambu Lab X1E 0.6 nozzle",
-		"Bambu Lab X1E 0.8 nozzle",
-		"Bambu Lab H2D 0.4 nozzle",
-		"Bambu Lab H2D 0.6 nozzle",
-		"Bambu Lab H2D 0.8 nozzle",
-		"Bambu Lab H2D Pro 0.4 nozzle",
-		"Bambu Lab H2D Pro 0.6 nozzle",
-		"Bambu Lab H2D Pro 0.8 nozzle",
-		"Bambu Lab H2S 0.4 nozzle",
-		"Bambu Lab H2S 0.6 nozzle",
-		"Bambu Lab H2S 0.8 nozzle",
-		"Bambu Lab P2S 0.4 nozzle",
-		"Bambu Lab P2S 0.6 nozzle",
-		"Bambu Lab P2S 0.8 nozzle",
-		"Bambu Lab X2D 0.2 nozzle",
-		"Bambu Lab X2D 0.4 nozzle",
-		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"cool_plate_temp": [
-		"55"
-	],
-	"cool_plate_temp_initial_layer": [
-		"55"
-	],
-	"counter_coef_1": [
-		"0"
-	],
-	"counter_coef_2": [
-		"0.008"
-	],
-	"counter_coef_3": [
-		"-0.041"
-	],
-	"counter_limit_max": [
-		"0.033"
-	],
-	"counter_limit_min": [
-		"-0.035"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"diameter_limit": [
-		"50"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"80"
-	],
-	"fan_max_speed": [
-		"90"
-	],
-	"fan_min_speed": [
-		"70"
-	],
-	"filament_adhesiveness_category": [
-		"100"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cost": [
-		"42.5"
-	],
-	"filament_density": [
-		"1.26"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard"
-	],
-	"filament_flow_ratio": [
-		"1",
-		"1"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"8",
-		"10"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_notes": "File Version:2.7 - V.Pack:18_05_2026",
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"0.6",
-		"0.6"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_scarf_gap": [
-		"15%"
-	],
-	"filament_scarf_height": [
-		"10%"
-	],
-	"filament_scarf_length": [
-		"10"
-	],
-	"filament_scarf_seam_type": [
-		"none"
-	],
-	"filament_settings_id": [
-		"addnorth PLA Premium Silk"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode {if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200 {elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150 {elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50 {endif} {if activate_air_filtration[current_extruder] && support_air_filtration} M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} {endif}"
-	],
-	"filament_type": [
-		"PLA"
-	],
-	"filament_vendor": [
-		"addnorth"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hole_coef_1": [
-		"0"
-	],
-	"hole_coef_2": [
-		"-0.008"
-	],
-	"hole_coef_3": [
-		"0.23415"
-	],
-	"hole_limit_max": [
-		"0.22"
-	],
-	"hole_limit_min": [
-		"0.088"
-	],
-	"hot_plate_temp": [
-		"60"
-	],
-	"hot_plate_temp_initial_layer": [
-		"60"
-	],
-	"impact_strength_z": [
-		"10"
-	],
-	"nozzle_temperature": [
-		"250",
-		"250"
-	],
-	"nozzle_temperature_initial_layer": [
-		"245",
-		"245"
-	],
-	"nozzle_temperature_range_high": [
-		"255"
-	],
-	"nozzle_temperature_range_low": [
-		"235"
-	],
-	"overhang_fan_speed": [
-		"80"
-	],
-	"overhang_fan_threshold": [
-		"25%"
-	],
-	"overhang_threshold_participating_cooling": [
-		"95%"
-	],
-	"pre_start_fan_time": [
-		"2"
-	],
-	"pressure_advance": [
-		"0.02"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"45"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"45"
-	],
-	"temperature_vitrification": [
-		"50"
-	],
-	"textured_plate_temp": [
-		"65"
-	],
-	"textured_plate_temp_initial_layer": [
-		"65"
-	],
-	"version": "2.0.0.77"
-}

resources/profiles/BBL/filament/addnorth/addnorth PLA Textura.json

@@ -1,339 +0,0 @@
-{
-	"type": "filament",
-	"name": "addnorth PLA Textura",
-	"inherits": "Generic PLA @base",
-	"from": "system",
-	"setting_id": "GF_ANTE_00",
-	"filament_id": "GF_ANTE",
-	"instantiation": "true",
-	"activate_air_filtration": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"70"
-	],
-	"chamber_temperatures": [
-		"0"
-	],
-	"circle_compensation_speed": [
-		"200"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers": [
-		"Bambu Lab A1 mini 0.4 nozzle",
-		"Bambu Lab A1 mini 0.6 nozzle",
-		"Bambu Lab A1 mini 0.8 nozzle",
-		"Bambu Lab A1 0.4 nozzle",
-		"Bambu Lab A1 0.6 nozzle",
-		"Bambu Lab A1 0.8 nozzle",
-		"Bambu Lab P1P 0.4 nozzle",
-		"Bambu Lab P1P 0.6 nozzle",
-		"Bambu Lab P1P 0.8 nozzle",
-		"Bambu Lab P1S 0.4 nozzle",
-		"Bambu Lab P1S 0.6 nozzle",
-		"Bambu Lab P1S 0.8 nozzle",
-		"Bambu Lab X1 0.4 nozzle",
-		"Bambu Lab X1 0.6 nozzle",
-		"Bambu Lab X1 0.8 nozzle",
-		"Bambu Lab X1 Carbon 0.4 nozzle",
-		"Bambu Lab X1 Carbon 0.6 nozzle",
-		"Bambu Lab X1 Carbon 0.8 nozzle",
-		"Bambu Lab X1E 0.4 nozzle",
-		"Bambu Lab X1E 0.6 nozzle",
-		"Bambu Lab X1E 0.8 nozzle",
-		"Bambu Lab H2D 0.4 nozzle",
-		"Bambu Lab H2D 0.6 nozzle",
-		"Bambu Lab H2D 0.8 nozzle",
-		"Bambu Lab H2D Pro 0.4 nozzle",
-		"Bambu Lab H2D Pro 0.6 nozzle",
-		"Bambu Lab H2D Pro 0.8 nozzle",
-		"Bambu Lab H2S 0.4 nozzle",
-		"Bambu Lab H2S 0.6 nozzle",
-		"Bambu Lab H2S 0.8 nozzle",
-		"Bambu Lab P2S 0.4 nozzle",
-		"Bambu Lab P2S 0.6 nozzle",
-		"Bambu Lab P2S 0.8 nozzle",
-		"Bambu Lab X2D 0.2 nozzle",
-		"Bambu Lab X2D 0.4 nozzle",
-		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"cool_plate_temp": [
-		"55"
-	],
-	"cool_plate_temp_initial_layer": [
-		"55"
-	],
-	"counter_coef_1": [
-		"0"
-	],
-	"counter_coef_2": [
-		"0.008"
-	],
-	"counter_coef_3": [
-		"-0.041"
-	],
-	"counter_limit_max": [
-		"0.033"
-	],
-	"counter_limit_min": [
-		"-0.035"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"diameter_limit": [
-		"50"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"80"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"filament_adhesiveness_category": [
-		"100"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cost": [
-		"55"
-	],
-	"filament_density": [
-		"1.27"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard"
-	],
-	"filament_flow_ratio": [
-		"0.98",
-		"0.98"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"10",
-		"14"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_notes": "File Version:2.7 - V.Pack:18_05_2026",
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"0.6",
-		"0.6"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_scarf_gap": [
-		"15%"
-	],
-	"filament_scarf_height": [
-		"10%"
-	],
-	"filament_scarf_length": [
-		"10"
-	],
-	"filament_scarf_seam_type": [
-		"none"
-	],
-	"filament_settings_id": [
-		"addnorth PLA Textura"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode {if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200 {elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150 {elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50 {endif} {if activate_air_filtration[current_extruder] && support_air_filtration} M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} {endif}"
-	],
-	"filament_type": [
-		"PLA"
-	],
-	"filament_vendor": [
-		"addnorth"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hole_coef_1": [
-		"0"
-	],
-	"hole_coef_2": [
-		"-0.008"
-	],
-	"hole_coef_3": [
-		"0.23415"
-	],
-	"hole_limit_max": [
-		"0.22"
-	],
-	"hole_limit_min": [
-		"0.088"
-	],
-	"hot_plate_temp": [
-		"60"
-	],
-	"hot_plate_temp_initial_layer": [
-		"60"
-	],
-	"impact_strength_z": [
-		"10"
-	],
-	"nozzle_temperature": [
-		"235",
-		"235"
-	],
-	"nozzle_temperature_initial_layer": [
-		"235",
-		"235"
-	],
-	"nozzle_temperature_range_high": [
-		"240"
-	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"25%"
-	],
-	"overhang_threshold_participating_cooling": [
-		"95%"
-	],
-	"pre_start_fan_time": [
-		"2"
-	],
-	"pressure_advance": [
-		"0.02"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"45"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"45"
-	],
-	"temperature_vitrification": [
-		"50"
-	],
-	"textured_plate_temp": [
-		"65"
-	],
-	"textured_plate_temp_initial_layer": [
-		"65"
-	],
-	"version": "2.0.0.77"
-}

resources/profiles/BBL/filament/addnorth/addnorth PLA Wood.json

@@ -1,339 +0,0 @@
-{
-	"type": "filament",
-	"name": "addnorth PLA Wood",
-	"inherits": "Generic PLA @base",
-	"from": "system",
-	"setting_id": "GF_ANPLW_00",
-	"filament_id": "GF_ANPLW",
-	"instantiation": "true",
-	"activate_air_filtration": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"70"
-	],
-	"chamber_temperatures": [
-		"0"
-	],
-	"circle_compensation_speed": [
-		"200"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers": [
-		"Bambu Lab A1 mini 0.4 nozzle",
-		"Bambu Lab A1 mini 0.6 nozzle",
-		"Bambu Lab A1 mini 0.8 nozzle",
-		"Bambu Lab A1 0.4 nozzle",
-		"Bambu Lab A1 0.6 nozzle",
-		"Bambu Lab A1 0.8 nozzle",
-		"Bambu Lab P1P 0.4 nozzle",
-		"Bambu Lab P1P 0.6 nozzle",
-		"Bambu Lab P1P 0.8 nozzle",
-		"Bambu Lab P1S 0.4 nozzle",
-		"Bambu Lab P1S 0.6 nozzle",
-		"Bambu Lab P1S 0.8 nozzle",
-		"Bambu Lab X1 0.4 nozzle",
-		"Bambu Lab X1 0.6 nozzle",
-		"Bambu Lab X1 0.8 nozzle",
-		"Bambu Lab X1 Carbon 0.4 nozzle",
-		"Bambu Lab X1 Carbon 0.6 nozzle",
-		"Bambu Lab X1 Carbon 0.8 nozzle",
-		"Bambu Lab X1E 0.4 nozzle",
-		"Bambu Lab X1E 0.6 nozzle",
-		"Bambu Lab X1E 0.8 nozzle",
-		"Bambu Lab H2D 0.4 nozzle",
-		"Bambu Lab H2D 0.6 nozzle",
-		"Bambu Lab H2D 0.8 nozzle",
-		"Bambu Lab H2D Pro 0.4 nozzle",
-		"Bambu Lab H2D Pro 0.6 nozzle",
-		"Bambu Lab H2D Pro 0.8 nozzle",
-		"Bambu Lab H2S 0.4 nozzle",
-		"Bambu Lab H2S 0.6 nozzle",
-		"Bambu Lab H2S 0.8 nozzle",
-		"Bambu Lab P2S 0.4 nozzle",
-		"Bambu Lab P2S 0.6 nozzle",
-		"Bambu Lab P2S 0.8 nozzle",
-		"Bambu Lab X2D 0.2 nozzle",
-		"Bambu Lab X2D 0.4 nozzle",
-		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"cool_plate_temp": [
-		"35"
-	],
-	"cool_plate_temp_initial_layer": [
-		"35"
-	],
-	"counter_coef_1": [
-		"0"
-	],
-	"counter_coef_2": [
-		"0.008"
-	],
-	"counter_coef_3": [
-		"-0.041"
-	],
-	"counter_limit_max": [
-		"0.033"
-	],
-	"counter_limit_min": [
-		"-0.035"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"diameter_limit": [
-		"50"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"filament_adhesiveness_category": [
-		"100"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cost": [
-		"54.5"
-	],
-	"filament_density": [
-		"1.24"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard"
-	],
-	"filament_flow_ratio": [
-		"0.98",
-		"0.98"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"8",
-		"8"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_notes": "File Version:2.7 - V.Pack:18_05_2026",
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"0.6",
-		"0.6"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_scarf_gap": [
-		"15%"
-	],
-	"filament_scarf_height": [
-		"10%"
-	],
-	"filament_scarf_length": [
-		"10"
-	],
-	"filament_scarf_seam_type": [
-		"none"
-	],
-	"filament_settings_id": [
-		"addnorth PLA Wood"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode {if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200 {elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150 {elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50 {endif} {if activate_air_filtration[current_extruder] && support_air_filtration} M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} {endif}"
-	],
-	"filament_type": [
-		"PLA"
-	],
-	"filament_vendor": [
-		"addnorth"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hole_coef_1": [
-		"0"
-	],
-	"hole_coef_2": [
-		"-0.008"
-	],
-	"hole_coef_3": [
-		"0.23415"
-	],
-	"hole_limit_max": [
-		"0.22"
-	],
-	"hole_limit_min": [
-		"0.088"
-	],
-	"hot_plate_temp": [
-		"60"
-	],
-	"hot_plate_temp_initial_layer": [
-		"60"
-	],
-	"impact_strength_z": [
-		"10"
-	],
-	"nozzle_temperature": [
-		"230",
-		"230"
-	],
-	"nozzle_temperature_initial_layer": [
-		"230",
-		"230"
-	],
-	"nozzle_temperature_range_high": [
-		"230"
-	],
-	"nozzle_temperature_range_low": [
-		"200"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"overhang_threshold_participating_cooling": [
-		"95%"
-	],
-	"pre_start_fan_time": [
-		"0"
-	],
-	"pressure_advance": [
-		"0.02"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"45"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"45"
-	],
-	"temperature_vitrification": [
-		"50"
-	],
-	"textured_plate_temp": [
-		"60"
-	],
-	"textured_plate_temp_initial_layer": [
-		"60"
-	],
-	"version": "2.0.0.77"
-}

resources/profiles/BBL/filament/addnorth/addnorth PLA X-PLA High Speed.json

@@ -1,339 +0,0 @@
-{
-	"type": "filament",
-	"name": "addnorth PLA X-PLA High Speed",
-	"inherits": "Generic PLA High Speed @base",
-	"from": "system",
-	"setting_id": "GF_ANXPH_00",
-	"filament_id": "GF_ANXPH",
-	"instantiation": "true",
-	"activate_air_filtration": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"70"
-	],
-	"chamber_temperatures": [
-		"0"
-	],
-	"circle_compensation_speed": [
-		"200"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers": [
-		"Bambu Lab A1 mini 0.4 nozzle",
-		"Bambu Lab A1 mini 0.6 nozzle",
-		"Bambu Lab A1 mini 0.8 nozzle",
-		"Bambu Lab A1 0.4 nozzle",
-		"Bambu Lab A1 0.6 nozzle",
-		"Bambu Lab A1 0.8 nozzle",
-		"Bambu Lab P1P 0.4 nozzle",
-		"Bambu Lab P1P 0.6 nozzle",
-		"Bambu Lab P1P 0.8 nozzle",
-		"Bambu Lab P1S 0.4 nozzle",
-		"Bambu Lab P1S 0.6 nozzle",
-		"Bambu Lab P1S 0.8 nozzle",
-		"Bambu Lab X1 0.4 nozzle",
-		"Bambu Lab X1 0.6 nozzle",
-		"Bambu Lab X1 0.8 nozzle",
-		"Bambu Lab X1 Carbon 0.4 nozzle",
-		"Bambu Lab X1 Carbon 0.6 nozzle",
-		"Bambu Lab X1 Carbon 0.8 nozzle",
-		"Bambu Lab X1E 0.4 nozzle",
-		"Bambu Lab X1E 0.6 nozzle",
-		"Bambu Lab X1E 0.8 nozzle",
-		"Bambu Lab H2D 0.4 nozzle",
-		"Bambu Lab H2D 0.6 nozzle",
-		"Bambu Lab H2D 0.8 nozzle",
-		"Bambu Lab H2D Pro 0.4 nozzle",
-		"Bambu Lab H2D Pro 0.6 nozzle",
-		"Bambu Lab H2D Pro 0.8 nozzle",
-		"Bambu Lab H2S 0.4 nozzle",
-		"Bambu Lab H2S 0.6 nozzle",
-		"Bambu Lab H2S 0.8 nozzle",
-		"Bambu Lab P2S 0.4 nozzle",
-		"Bambu Lab P2S 0.6 nozzle",
-		"Bambu Lab P2S 0.8 nozzle",
-		"Bambu Lab X2D 0.2 nozzle",
-		"Bambu Lab X2D 0.4 nozzle",
-		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"cool_plate_temp": [
-		"55"
-	],
-	"cool_plate_temp_initial_layer": [
-		"55"
-	],
-	"counter_coef_1": [
-		"0"
-	],
-	"counter_coef_2": [
-		"0.008"
-	],
-	"counter_coef_3": [
-		"-0.041"
-	],
-	"counter_limit_max": [
-		"0.033"
-	],
-	"counter_limit_min": [
-		"-0.035"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"diameter_limit": [
-		"50"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"filament_adhesiveness_category": [
-		"100"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_density": [
-		"1.24"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard"
-	],
-	"filament_flow_ratio": [
-		"0.98",
-		"0.98"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"12",
-		"12"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_notes": "File Version:2.7 - V.Pack:18_05_2026",
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"0.6",
-		"0.6"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_scarf_gap": [
-		"15%"
-	],
-	"filament_scarf_height": [
-		"10%"
-	],
-	"filament_scarf_length": [
-		"10"
-	],
-	"filament_scarf_seam_type": [
-		"none"
-	],
-	"filament_settings_id": [
-		"addnorth PLA X-PLA High Speed"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode {if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200 {elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150 {elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50 {endif} {if activate_air_filtration[current_extruder] && support_air_filtration} M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} {endif}"
-	],
-	"filament_type": [
-		"PLA"
-	],
-	"filament_vendor": [
-		"addnorth"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hole_coef_1": [
-		"0"
-	],
-	"hole_coef_2": [
-		"-0.008"
-	],
-	"hole_coef_3": [
-		"0.23415"
-	],
-	"hole_limit_max": [
-		"0.22"
-	],
-	"hole_limit_min": [
-		"0.088"
-	],
-	"hot_plate_temp": [
-		"55"
-	],
-	"hot_plate_temp_initial_layer": [
-		"55"
-	],
-	"impact_strength_z": [
-		"10"
-	],
-	"nozzle_temperature": [
-		"240",
-		"240"
-	],
-	"nozzle_temperature_initial_layer": [
-		"235",
-		"235"
-	],
-	"nozzle_temperature_range_high": [
-		"240"
-	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"overhang_threshold_participating_cooling": [
-		"95%"
-	],
-	"pre_start_fan_time": [
-		"2"
-	],
-	"pressure_advance": [
-		"0.02"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"45"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"45"
-	],
-	"temperature_vitrification": [
-		"50"
-	],
-	"textured_plate_temp": [
-		"65"
-	],
-	"textured_plate_temp_initial_layer": [
-		"65"
-	],
-	"version": "2.0.0.77"
-}

resources/profiles/BBL/filament/addnorth/addnorth PLA X-PLA.json

@@ -1,339 +0,0 @@
-{
-	"type": "filament",
-	"name": "addnorth PLA X-PLA",
-	"inherits": "Generic PLA @base",
-	"from": "system",
-	"setting_id": "GF_ANXP_00",
-	"filament_id": "GF_ANXP",
-	"instantiation": "true",
-	"activate_air_filtration": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"70"
-	],
-	"chamber_temperatures": [
-		"0"
-	],
-	"circle_compensation_speed": [
-		"200"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers": [
-		"Bambu Lab A1 mini 0.4 nozzle",
-		"Bambu Lab A1 mini 0.6 nozzle",
-		"Bambu Lab A1 mini 0.8 nozzle",
-		"Bambu Lab A1 0.4 nozzle",
-		"Bambu Lab A1 0.6 nozzle",
-		"Bambu Lab A1 0.8 nozzle",
-		"Bambu Lab P1P 0.4 nozzle",
-		"Bambu Lab P1P 0.6 nozzle",
-		"Bambu Lab P1P 0.8 nozzle",
-		"Bambu Lab P1S 0.4 nozzle",
-		"Bambu Lab P1S 0.6 nozzle",
-		"Bambu Lab P1S 0.8 nozzle",
-		"Bambu Lab X1 0.4 nozzle",
-		"Bambu Lab X1 0.6 nozzle",
-		"Bambu Lab X1 0.8 nozzle",
-		"Bambu Lab X1 Carbon 0.4 nozzle",
-		"Bambu Lab X1 Carbon 0.6 nozzle",
-		"Bambu Lab X1 Carbon 0.8 nozzle",
-		"Bambu Lab X1E 0.4 nozzle",
-		"Bambu Lab X1E 0.6 nozzle",
-		"Bambu Lab X1E 0.8 nozzle",
-		"Bambu Lab H2D 0.4 nozzle",
-		"Bambu Lab H2D 0.6 nozzle",
-		"Bambu Lab H2D 0.8 nozzle",
-		"Bambu Lab H2D Pro 0.4 nozzle",
-		"Bambu Lab H2D Pro 0.6 nozzle",
-		"Bambu Lab H2D Pro 0.8 nozzle",
-		"Bambu Lab H2S 0.4 nozzle",
-		"Bambu Lab H2S 0.6 nozzle",
-		"Bambu Lab H2S 0.8 nozzle",
-		"Bambu Lab P2S 0.4 nozzle",
-		"Bambu Lab P2S 0.6 nozzle",
-		"Bambu Lab P2S 0.8 nozzle",
-		"Bambu Lab X2D 0.2 nozzle",
-		"Bambu Lab X2D 0.4 nozzle",
-		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"cool_plate_temp": [
-		"55"
-	],
-	"cool_plate_temp_initial_layer": [
-		"55"
-	],
-	"counter_coef_1": [
-		"0"
-	],
-	"counter_coef_2": [
-		"0.008"
-	],
-	"counter_coef_3": [
-		"-0.041"
-	],
-	"counter_limit_max": [
-		"0.033"
-	],
-	"counter_limit_min": [
-		"-0.035"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"diameter_limit": [
-		"50"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"filament_adhesiveness_category": [
-		"100"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cost": [
-		"39"
-	],
-	"filament_density": [
-		"1.25"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard"
-	],
-	"filament_flow_ratio": [
-		"0.98",
-		"0.98"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"14",
-		"14"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_notes": "File Version:2.7 - V.Pack:18_05_2026",
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"0.6",
-		"0.6"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_scarf_gap": [
-		"15%"
-	],
-	"filament_scarf_height": [
-		"10%"
-	],
-	"filament_scarf_length": [
-		"10"
-	],
-	"filament_scarf_seam_type": [
-		"none"
-	],
-	"filament_settings_id": [
-		"addnorth PLA X-PLA"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode {if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200 {elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150 {elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50 {endif} {if activate_air_filtration[current_extruder] && support_air_filtration} M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} {endif}"
-	],
-	"filament_type": [
-		"PLA"
-	],
-	"filament_vendor": [
-		"addnorth"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hole_coef_1": [
-		"0"
-	],
-	"hole_coef_2": [
-		"-0.008"
-	],
-	"hole_coef_3": [
-		"0.23415"
-	],
-	"hole_limit_max": [
-		"0.22"
-	],
-	"hole_limit_min": [
-		"0.088"
-	],
-	"hot_plate_temp": [
-		"65"
-	],
-	"hot_plate_temp_initial_layer": [
-		"65"
-	],
-	"impact_strength_z": [
-		"10"
-	],
-	"nozzle_temperature": [
-		"235",
-		"235"
-	],
-	"nozzle_temperature_initial_layer": [
-		"230",
-		"230"
-	],
-	"nozzle_temperature_range_high": [
-		"240"
-	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"25%"
-	],
-	"overhang_threshold_participating_cooling": [
-		"95%"
-	],
-	"pre_start_fan_time": [
-		"2"
-	],
-	"pressure_advance": [
-		"0.02"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"45"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"45"
-	],
-	"temperature_vitrification": [
-		"50"
-	],
-	"textured_plate_temp": [
-		"65"
-	],
-	"textured_plate_temp_initial_layer": [
-		"65"
-	],
-	"version": "2.0.0.77"
-}

resources/profiles/BBL/filament/addnorth/addnorth PLA rPLA RE-ADD.json

@@ -1,339 +0,0 @@
-{
-	"type": "filament",
-	"name": "addnorth PLA rPLA RE-ADD",
-	"inherits": "Generic PLA @base",
-	"from": "system",
-	"setting_id": "GF_ANRPL_00",
-	"filament_id": "GF_ANRPL",
-	"instantiation": "true",
-	"activate_air_filtration": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"70"
-	],
-	"chamber_temperatures": [
-		"0"
-	],
-	"circle_compensation_speed": [
-		"200"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers": [
-		"Bambu Lab A1 mini 0.4 nozzle",
-		"Bambu Lab A1 mini 0.6 nozzle",
-		"Bambu Lab A1 mini 0.8 nozzle",
-		"Bambu Lab A1 0.4 nozzle",
-		"Bambu Lab A1 0.6 nozzle",
-		"Bambu Lab A1 0.8 nozzle",
-		"Bambu Lab P1P 0.4 nozzle",
-		"Bambu Lab P1P 0.6 nozzle",
-		"Bambu Lab P1P 0.8 nozzle",
-		"Bambu Lab P1S 0.4 nozzle",
-		"Bambu Lab P1S 0.6 nozzle",
-		"Bambu Lab P1S 0.8 nozzle",
-		"Bambu Lab X1 0.4 nozzle",
-		"Bambu Lab X1 0.6 nozzle",
-		"Bambu Lab X1 0.8 nozzle",
-		"Bambu Lab X1 Carbon 0.4 nozzle",
-		"Bambu Lab X1 Carbon 0.6 nozzle",
-		"Bambu Lab X1 Carbon 0.8 nozzle",
-		"Bambu Lab X1E 0.4 nozzle",
-		"Bambu Lab X1E 0.6 nozzle",
-		"Bambu Lab X1E 0.8 nozzle",
-		"Bambu Lab H2D 0.4 nozzle",
-		"Bambu Lab H2D 0.6 nozzle",
-		"Bambu Lab H2D 0.8 nozzle",
-		"Bambu Lab H2D Pro 0.4 nozzle",
-		"Bambu Lab H2D Pro 0.6 nozzle",
-		"Bambu Lab H2D Pro 0.8 nozzle",
-		"Bambu Lab H2S 0.4 nozzle",
-		"Bambu Lab H2S 0.6 nozzle",
-		"Bambu Lab H2S 0.8 nozzle",
-		"Bambu Lab P2S 0.4 nozzle",
-		"Bambu Lab P2S 0.6 nozzle",
-		"Bambu Lab P2S 0.8 nozzle",
-		"Bambu Lab X2D 0.2 nozzle",
-		"Bambu Lab X2D 0.4 nozzle",
-		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"cool_plate_temp": [
-		"55"
-	],
-	"cool_plate_temp_initial_layer": [
-		"5"
-	],
-	"counter_coef_1": [
-		"0"
-	],
-	"counter_coef_2": [
-		"0.008"
-	],
-	"counter_coef_3": [
-		"-0.041"
-	],
-	"counter_limit_max": [
-		"0.033"
-	],
-	"counter_limit_min": [
-		"-0.035"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"diameter_limit": [
-		"50"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"filament_adhesiveness_category": [
-		"100"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cost": [
-		"23"
-	],
-	"filament_density": [
-		"1.25"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard"
-	],
-	"filament_flow_ratio": [
-		"0.98",
-		"0.98"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"12",
-		"16"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_notes": "File Version:2.7 - V.Pack:18_05_2026",
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"0.6",
-		"0.6"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_scarf_gap": [
-		"15%"
-	],
-	"filament_scarf_height": [
-		"10%"
-	],
-	"filament_scarf_length": [
-		"10"
-	],
-	"filament_scarf_seam_type": [
-		"none"
-	],
-	"filament_settings_id": [
-		"addnorth PLA rPLA RE-ADD"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode {if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200 {elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150 {elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50 {endif} {if activate_air_filtration[current_extruder] && support_air_filtration} M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} {endif}"
-	],
-	"filament_type": [
-		"PLA"
-	],
-	"filament_vendor": [
-		"addnorth"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hole_coef_1": [
-		"0"
-	],
-	"hole_coef_2": [
-		"-0.008"
-	],
-	"hole_coef_3": [
-		"0.23415"
-	],
-	"hole_limit_max": [
-		"0.22"
-	],
-	"hole_limit_min": [
-		"0.088"
-	],
-	"hot_plate_temp": [
-		"55"
-	],
-	"hot_plate_temp_initial_layer": [
-		"55"
-	],
-	"impact_strength_z": [
-		"10"
-	],
-	"nozzle_temperature": [
-		"240",
-		"240"
-	],
-	"nozzle_temperature_initial_layer": [
-		"235",
-		"235"
-	],
-	"nozzle_temperature_range_high": [
-		"240"
-	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"overhang_threshold_participating_cooling": [
-		"95%"
-	],
-	"pre_start_fan_time": [
-		"2"
-	],
-	"pressure_advance": [
-		"0.02"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"45"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"45"
-	],
-	"temperature_vitrification": [
-		"50"
-	],
-	"textured_plate_temp": [
-		"65"
-	],
-	"textured_plate_temp_initial_layer": [
-		"65"
-	],
-	"version": "2.0.0.77"
-}

resources/profiles/BBL/filament/addnorth/addnorth PLA-CF Carbon Fiber.json

@@ -1,320 +0,0 @@
-{
-	"type": "filament",
-	"name": "addnorth PLA-CF Carbon Fiber",
-	"inherits": "Generic PLA-CF @base",
-	"from": "system",
-	"setting_id": "GF_ANPCF_00",
-	"filament_id": "GF_ANPCF",
-	"instantiation": "true",
-	"activate_air_filtration": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"chamber_temperatures": [
-		"0"
-	],
-	"circle_compensation_speed": [
-		"200"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers": [
-		"Bambu Lab A1 mini 0.4 nozzle",
-		"Bambu Lab A1 mini 0.6 nozzle",
-		"Bambu Lab A1 mini 0.8 nozzle",
-		"Bambu Lab A1 0.4 nozzle",
-		"Bambu Lab A1 0.6 nozzle",
-		"Bambu Lab A1 0.8 nozzle",
-		"Bambu Lab P1P 0.4 nozzle",
-		"Bambu Lab P1P 0.6 nozzle",
-		"Bambu Lab P1P 0.8 nozzle",
-		"Bambu Lab P1S 0.4 nozzle",
-		"Bambu Lab P1S 0.6 nozzle",
-		"Bambu Lab P1S 0.8 nozzle",
-		"Bambu Lab X1 0.4 nozzle",
-		"Bambu Lab X1 0.6 nozzle",
-		"Bambu Lab X1 0.8 nozzle",
-		"Bambu Lab X1 Carbon 0.4 nozzle",
-		"Bambu Lab X1 Carbon 0.6 nozzle",
-		"Bambu Lab X1 Carbon 0.8 nozzle",
-		"Bambu Lab X1E 0.4 nozzle",
-		"Bambu Lab X1E 0.6 nozzle",
-		"Bambu Lab X1E 0.8 nozzle",
-		"Bambu Lab H2D 0.4 nozzle",
-		"Bambu Lab H2D 0.6 nozzle",
-		"Bambu Lab H2D 0.8 nozzle",
-		"Bambu Lab H2D Pro 0.4 nozzle",
-		"Bambu Lab H2D Pro 0.6 nozzle",
-		"Bambu Lab H2D Pro 0.8 nozzle",
-		"Bambu Lab H2S 0.4 nozzle",
-		"Bambu Lab H2S 0.6 nozzle",
-		"Bambu Lab H2S 0.8 nozzle",
-		"Bambu Lab P2S 0.4 nozzle",
-		"Bambu Lab P2S 0.6 nozzle",
-		"Bambu Lab P2S 0.8 nozzle",
-		"Bambu Lab X2D 0.2 nozzle",
-		"Bambu Lab X2D 0.4 nozzle",
-		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"cool_plate_temp": [
-		"45"
-	],
-	"cool_plate_temp_initial_layer": [
-		"45"
-	],
-	"counter_coef_1": [
-		"0"
-	],
-	"counter_coef_2": [
-		"0.008"
-	],
-	"counter_coef_3": [
-		"-0.041"
-	],
-	"counter_limit_max": [
-		"0.033"
-	],
-	"counter_limit_min": [
-		"-0.035"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"diameter_limit": [
-		"50"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"filament_adhesiveness_category": [
-		"100"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cost": [
-		"37"
-	],
-	"filament_density": [
-		"1.27"
-	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n\n"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard"
-	],
-	"filament_flow_ratio": [
-		"0.98"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"14"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_notes": "File Version:2.7 - V.Pack:18_05_2026",
-	"filament_pre_cooling_temperature": [
-		"0"
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_travel_time": [
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil"
-	],
-	"filament_scarf_gap": [
-		"15%"
-	],
-	"filament_scarf_height": [
-		"10%"
-	],
-	"filament_scarf_length": [
-		"10"
-	],
-	"filament_scarf_seam_type": [
-		"none"
-	],
-	"filament_settings_id": [
-		"addnorth PLA-CF Carbon Fiber"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-	],
-	"filament_type": [
-		"PLA-CF"
-	],
-	"filament_vendor": [
-		"addnorth"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hole_coef_1": [
-		"0"
-	],
-	"hole_coef_2": [
-		"-0.008"
-	],
-	"hole_coef_3": [
-		"0.23415"
-	],
-	"hole_limit_max": [
-		"0.22"
-	],
-	"hole_limit_min": [
-		"0.088"
-	],
-	"hot_plate_temp": [
-		"55"
-	],
-	"hot_plate_temp_initial_layer": [
-		"55"
-	],
-	"impact_strength_z": [
-		"10"
-	],
-	"nozzle_temperature": [
-		"235"
-	],
-	"nozzle_temperature_initial_layer": [
-		"230"
-	],
-	"nozzle_temperature_range_high": [
-		"250"
-	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"overhang_threshold_participating_cooling": [
-		"95%"
-	],
-	"pre_start_fan_time": [
-		"0"
-	],
-	"pressure_advance": [
-		"0.02"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"40"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"7"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"50"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"50"
-	],
-	"temperature_vitrification": [
-		"50"
-	],
-	"textured_plate_temp": [
-		"55"
-	],
-	"textured_plate_temp_initial_layer": [
-		"55"
-	],
-	"version": "2.0.0.87"
-}

resources/profiles/BBL/filament/addnorth/addnorth PVDF Adamant S1.json

@@ -1,339 +0,0 @@
-{
-	"type": "filament",
-	"name": "addnorth PVDF Adamant S1",
-	"inherits": "Generic PA @base",
-	"from": "system",
-	"setting_id": "GF_ANPV_00",
-	"filament_id": "GF_ANPV",
-	"instantiation": "true",
-	"activate_air_filtration": [
-		"1"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"chamber_temperatures": [
-		"50"
-	],
-	"circle_compensation_speed": [
-		"200"
-	],
-	"close_fan_the_first_x_layers": [
-		"3"
-	],
-	"compatible_printers": [
-		"Bambu Lab A1 mini 0.4 nozzle",
-		"Bambu Lab A1 mini 0.6 nozzle",
-		"Bambu Lab A1 mini 0.8 nozzle",
-		"Bambu Lab A1 0.4 nozzle",
-		"Bambu Lab A1 0.6 nozzle",
-		"Bambu Lab A1 0.8 nozzle",
-		"Bambu Lab P1P 0.4 nozzle",
-		"Bambu Lab P1P 0.6 nozzle",
-		"Bambu Lab P1P 0.8 nozzle",
-		"Bambu Lab P1S 0.4 nozzle",
-		"Bambu Lab P1S 0.6 nozzle",
-		"Bambu Lab P1S 0.8 nozzle",
-		"Bambu Lab X1 0.4 nozzle",
-		"Bambu Lab X1 0.6 nozzle",
-		"Bambu Lab X1 0.8 nozzle",
-		"Bambu Lab X1 Carbon 0.4 nozzle",
-		"Bambu Lab X1 Carbon 0.6 nozzle",
-		"Bambu Lab X1 Carbon 0.8 nozzle",
-		"Bambu Lab X1E 0.4 nozzle",
-		"Bambu Lab X1E 0.6 nozzle",
-		"Bambu Lab X1E 0.8 nozzle",
-		"Bambu Lab H2D 0.4 nozzle",
-		"Bambu Lab H2D 0.6 nozzle",
-		"Bambu Lab H2D 0.8 nozzle",
-		"Bambu Lab H2D Pro 0.4 nozzle",
-		"Bambu Lab H2D Pro 0.6 nozzle",
-		"Bambu Lab H2D Pro 0.8 nozzle",
-		"Bambu Lab H2S 0.4 nozzle",
-		"Bambu Lab H2S 0.6 nozzle",
-		"Bambu Lab H2S 0.8 nozzle",
-		"Bambu Lab P2S 0.4 nozzle",
-		"Bambu Lab P2S 0.6 nozzle",
-		"Bambu Lab P2S 0.8 nozzle",
-		"Bambu Lab X2D 0.2 nozzle",
-		"Bambu Lab X2D 0.4 nozzle",
-		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"cool_plate_temp": [
-		"0"
-	],
-	"cool_plate_temp_initial_layer": [
-		"0"
-	],
-	"counter_coef_1": [
-		"0"
-	],
-	"counter_coef_2": [
-		"0.008"
-	],
-	"counter_coef_3": [
-		"-0.041"
-	],
-	"counter_limit_max": [
-		"0.033"
-	],
-	"counter_limit_min": [
-		"-0.035"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"diameter_limit": [
-		"50"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"100"
-	],
-	"eng_plate_temp_initial_layer": [
-		"100"
-	],
-	"fan_cooling_layer_time": [
-		"5"
-	],
-	"fan_max_speed": [
-		"80"
-	],
-	"fan_min_speed": [
-		"25"
-	],
-	"filament_adhesiveness_category": [
-		"400"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cost": [
-		"146"
-	],
-	"filament_density": [
-		"1.8"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard"
-	],
-	"filament_flow_ratio": [
-		"1",
-		"1"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"4",
-		"4"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_notes": "File Version:2.6 - V.Pack:18_05_2026",
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"1",
-		"1"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_scarf_gap": [
-		"0%"
-	],
-	"filament_scarf_height": [
-		"10%"
-	],
-	"filament_scarf_length": [
-		"10"
-	],
-	"filament_scarf_seam_type": [
-		"none"
-	],
-	"filament_settings_id": [
-		"addnorth PVDF Adamant S1"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-	],
-	"filament_type": [
-		"PA"
-	],
-	"filament_vendor": [
-		"addnorth"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"0.4",
-		"0.4"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"2"
-	],
-	"hole_coef_1": [
-		"0"
-	],
-	"hole_coef_2": [
-		"-0.008"
-	],
-	"hole_coef_3": [
-		"0.23415"
-	],
-	"hole_limit_max": [
-		"0.22"
-	],
-	"hole_limit_min": [
-		"0.088"
-	],
-	"hot_plate_temp": [
-		"100"
-	],
-	"hot_plate_temp_initial_layer": [
-		"100"
-	],
-	"impact_strength_z": [
-		"10"
-	],
-	"nozzle_temperature": [
-		"260",
-		"260"
-	],
-	"nozzle_temperature_initial_layer": [
-		"265",
-		"265"
-	],
-	"nozzle_temperature_range_high": [
-		"260"
-	],
-	"nozzle_temperature_range_low": [
-		"240"
-	],
-	"overhang_fan_speed": [
-		"80"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"overhang_threshold_participating_cooling": [
-		"95%"
-	],
-	"pre_start_fan_time": [
-		"2"
-	],
-	"pressure_advance": [
-		"0.02"
-	],
-	"reduce_fan_stop_start_freq": [
-		"0"
-	],
-	"required_nozzle_HRC": [
-		"40"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"slow_down_min_speed": [
-		"10"
-	],
-	"supertack_plate_temp": [
-		"0"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"0"
-	],
-	"temperature_vitrification": [
-		"135"
-	],
-	"textured_plate_temp": [
-		"100"
-	],
-	"textured_plate_temp_initial_layer": [
-		"100"
-	],
-	"version": "2.0.0.77"
-}

resources/profiles/BBL/filament/addnorth/addnorth TPU EasyFlex.json

@@ -1,339 +0,0 @@
-{
-	"type": "filament",
-	"name": "addnorth TPU EasyFlex",
-	"inherits": "Generic TPU @base",
-	"from": "system",
-	"setting_id": "GF_ANEF_00",
-	"filament_id": "GF_ANEF",
-	"instantiation": "true",
-	"activate_air_filtration": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"70"
-	],
-	"chamber_temperatures": [
-		"0"
-	],
-	"circle_compensation_speed": [
-		"200"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers": [
-		"Bambu Lab A1 mini 0.4 nozzle",
-		"Bambu Lab A1 mini 0.6 nozzle",
-		"Bambu Lab A1 mini 0.8 nozzle",
-		"Bambu Lab A1 0.4 nozzle",
-		"Bambu Lab A1 0.6 nozzle",
-		"Bambu Lab A1 0.8 nozzle",
-		"Bambu Lab P1P 0.4 nozzle",
-		"Bambu Lab P1P 0.6 nozzle",
-		"Bambu Lab P1P 0.8 nozzle",
-		"Bambu Lab P1S 0.4 nozzle",
-		"Bambu Lab P1S 0.6 nozzle",
-		"Bambu Lab P1S 0.8 nozzle",
-		"Bambu Lab X1 0.4 nozzle",
-		"Bambu Lab X1 0.6 nozzle",
-		"Bambu Lab X1 0.8 nozzle",
-		"Bambu Lab X1 Carbon 0.4 nozzle",
-		"Bambu Lab X1 Carbon 0.6 nozzle",
-		"Bambu Lab X1 Carbon 0.8 nozzle",
-		"Bambu Lab X1E 0.4 nozzle",
-		"Bambu Lab X1E 0.6 nozzle",
-		"Bambu Lab X1E 0.8 nozzle",
-		"Bambu Lab H2D 0.4 nozzle",
-		"Bambu Lab H2D 0.6 nozzle",
-		"Bambu Lab H2D 0.8 nozzle",
-		"Bambu Lab H2D Pro 0.4 nozzle",
-		"Bambu Lab H2D Pro 0.6 nozzle",
-		"Bambu Lab H2D Pro 0.8 nozzle",
-		"Bambu Lab H2S 0.4 nozzle",
-		"Bambu Lab H2S 0.6 nozzle",
-		"Bambu Lab H2S 0.8 nozzle",
-		"Bambu Lab P2S 0.4 nozzle",
-		"Bambu Lab P2S 0.6 nozzle",
-		"Bambu Lab P2S 0.8 nozzle",
-		"Bambu Lab X2D 0.2 nozzle",
-		"Bambu Lab X2D 0.4 nozzle",
-		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"cool_plate_temp": [
-		"0"
-	],
-	"cool_plate_temp_initial_layer": [
-		"0"
-	],
-	"counter_coef_1": [
-		"0"
-	],
-	"counter_coef_2": [
-		"0.008"
-	],
-	"counter_coef_3": [
-		"-0.041"
-	],
-	"counter_limit_max": [
-		"0.033"
-	],
-	"counter_limit_min": [
-		"-0.035"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"diameter_limit": [
-		"50"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"30"
-	],
-	"eng_plate_temp_initial_layer": [
-		"30"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"filament_adhesiveness_category": [
-		"600"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cost": [
-		"82"
-	],
-	"filament_density": [
-		"1.1"
-	],
-	"filament_deretraction_speed": [
-		"40",
-		"40"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard"
-	],
-	"filament_flow_ratio": [
-		"1",
-		"1"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"3.9",
-		"5"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_notes": "File Version:2.7 - V.Pack:18_05_2026",
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"0",
-		"0"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"1",
-		"1"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_scarf_gap": [
-		"15%"
-	],
-	"filament_scarf_height": [
-		"10%"
-	],
-	"filament_scarf_length": [
-		"10"
-	],
-	"filament_scarf_seam_type": [
-		"none"
-	],
-	"filament_settings_id": [
-		"addnorth TPU EasyFlex"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode {if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200 {elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150 {elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50 {endif} {if activate_air_filtration[current_extruder] && support_air_filtration} M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} {endif}"
-	],
-	"filament_type": [
-		"TPU"
-	],
-	"filament_vendor": [
-		"addnorth"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hole_coef_1": [
-		"0"
-	],
-	"hole_coef_2": [
-		"-0.008"
-	],
-	"hole_coef_3": [
-		"0.23415"
-	],
-	"hole_limit_max": [
-		"0.22"
-	],
-	"hole_limit_min": [
-		"0.088"
-	],
-	"hot_plate_temp": [
-		"35"
-	],
-	"hot_plate_temp_initial_layer": [
-		"35"
-	],
-	"impact_strength_z": [
-		"10"
-	],
-	"nozzle_temperature": [
-		"240",
-		"240"
-	],
-	"nozzle_temperature_initial_layer": [
-		"235",
-		"235"
-	],
-	"nozzle_temperature_range_high": [
-		"250"
-	],
-	"nozzle_temperature_range_low": [
-		"230"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"overhang_threshold_participating_cooling": [
-		"95%"
-	],
-	"pre_start_fan_time": [
-		"2"
-	],
-	"pressure_advance": [
-		"0.02"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"10"
-	],
-	"slow_down_min_speed": [
-		"10"
-	],
-	"supertack_plate_temp": [
-		"0"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"0"
-	],
-	"temperature_vitrification": [
-		"50"
-	],
-	"textured_plate_temp": [
-		"35"
-	],
-	"textured_plate_temp_initial_layer": [
-		"35"
-	],
-	"version": "2.0.0.77"
-}

resources/profiles/BBL/filament/addnorth/addnorth TPU Pro Matte 85A.json

@@ -1,339 +0,0 @@
-{
-	"type": "filament",
-	"name": "addnorth TPU Pro Matte 85A",
-	"inherits": "Generic TPU @base",
-	"from": "system",
-	"setting_id": "GF_ANTA_00",
-	"filament_id": "GF_ANTA",
-	"instantiation": "true",
-	"activate_air_filtration": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"70"
-	],
-	"chamber_temperatures": [
-		"0"
-	],
-	"circle_compensation_speed": [
-		"200"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers": [
-		"Bambu Lab A1 mini 0.4 nozzle",
-		"Bambu Lab A1 mini 0.6 nozzle",
-		"Bambu Lab A1 mini 0.8 nozzle",
-		"Bambu Lab A1 0.4 nozzle",
-		"Bambu Lab A1 0.6 nozzle",
-		"Bambu Lab A1 0.8 nozzle",
-		"Bambu Lab P1P 0.4 nozzle",
-		"Bambu Lab P1P 0.6 nozzle",
-		"Bambu Lab P1P 0.8 nozzle",
-		"Bambu Lab P1S 0.4 nozzle",
-		"Bambu Lab P1S 0.6 nozzle",
-		"Bambu Lab P1S 0.8 nozzle",
-		"Bambu Lab X1 0.4 nozzle",
-		"Bambu Lab X1 0.6 nozzle",
-		"Bambu Lab X1 0.8 nozzle",
-		"Bambu Lab X1 Carbon 0.4 nozzle",
-		"Bambu Lab X1 Carbon 0.6 nozzle",
-		"Bambu Lab X1 Carbon 0.8 nozzle",
-		"Bambu Lab X1E 0.4 nozzle",
-		"Bambu Lab X1E 0.6 nozzle",
-		"Bambu Lab X1E 0.8 nozzle",
-		"Bambu Lab H2D 0.4 nozzle",
-		"Bambu Lab H2D 0.6 nozzle",
-		"Bambu Lab H2D 0.8 nozzle",
-		"Bambu Lab H2D Pro 0.4 nozzle",
-		"Bambu Lab H2D Pro 0.6 nozzle",
-		"Bambu Lab H2D Pro 0.8 nozzle",
-		"Bambu Lab H2S 0.4 nozzle",
-		"Bambu Lab H2S 0.6 nozzle",
-		"Bambu Lab H2S 0.8 nozzle",
-		"Bambu Lab P2S 0.4 nozzle",
-		"Bambu Lab P2S 0.6 nozzle",
-		"Bambu Lab P2S 0.8 nozzle",
-		"Bambu Lab X2D 0.2 nozzle",
-		"Bambu Lab X2D 0.4 nozzle",
-		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"cool_plate_temp": [
-		"30"
-	],
-	"cool_plate_temp_initial_layer": [
-		"30"
-	],
-	"counter_coef_1": [
-		"0"
-	],
-	"counter_coef_2": [
-		"0.008"
-	],
-	"counter_coef_3": [
-		"-0.041"
-	],
-	"counter_limit_max": [
-		"0.033"
-	],
-	"counter_limit_min": [
-		"-0.035"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"diameter_limit": [
-		"50"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"30"
-	],
-	"eng_plate_temp_initial_layer": [
-		"30"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"filament_adhesiveness_category": [
-		"600"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cost": [
-		"82"
-	],
-	"filament_density": [
-		"1.1"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard"
-	],
-	"filament_flow_ratio": [
-		"1",
-		"1"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"3.2",
-		"5"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_notes": "File Version:2.2 - V.Pack:18_05_2026",
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"0",
-		"0"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"1",
-		"1"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"40",
-		"40"
-	],
-	"filament_scarf_gap": [
-		"15%"
-	],
-	"filament_scarf_height": [
-		"10%"
-	],
-	"filament_scarf_length": [
-		"10"
-	],
-	"filament_scarf_seam_type": [
-		"none"
-	],
-	"filament_settings_id": [
-		"addnorth TPU Pro Matte 85A"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode {if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200 {elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150 {elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50 {endif} {if activate_air_filtration[current_extruder] && support_air_filtration} M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} {endif}"
-	],
-	"filament_type": [
-		"TPU"
-	],
-	"filament_vendor": [
-		"addnorth"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hole_coef_1": [
-		"0"
-	],
-	"hole_coef_2": [
-		"-0.008"
-	],
-	"hole_coef_3": [
-		"0.23415"
-	],
-	"hole_limit_max": [
-		"0.22"
-	],
-	"hole_limit_min": [
-		"0.088"
-	],
-	"hot_plate_temp": [
-		"35"
-	],
-	"hot_plate_temp_initial_layer": [
-		"35"
-	],
-	"impact_strength_z": [
-		"10"
-	],
-	"nozzle_temperature": [
-		"250",
-		"250"
-	],
-	"nozzle_temperature_initial_layer": [
-		"250",
-		"250"
-	],
-	"nozzle_temperature_range_high": [
-		"250"
-	],
-	"nozzle_temperature_range_low": [
-		"230"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"overhang_threshold_participating_cooling": [
-		"95%"
-	],
-	"pre_start_fan_time": [
-		"2"
-	],
-	"pressure_advance": [
-		"0.02"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_min_speed": [
-		"10"
-	],
-	"supertack_plate_temp": [
-		"0"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"0"
-	],
-	"temperature_vitrification": [
-		"50"
-	],
-	"textured_plate_temp": [
-		"35"
-	],
-	"textured_plate_temp_initial_layer": [
-		"35"
-	],
-	"version": "2.0.0.77"
-}

resources/profiles/BBL/filament/addnorth/addnorth TPU Pro Matte 95A.json

@@ -1,340 +0,0 @@
-{
-	"type": "filament",
-	"name": "addnorth TPU Pro Matte 95A",
-	"inherits": "Generic TPU @base",
-	"from": "system",
-	"setting_id": "GF_ANTM_00",
-	"filament_id": "GF_ANTM",
-	"instantiation": "true",
-	"activate_air_filtration": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"70"
-	],
-	"chamber_temperatures": [
-		"0"
-	],
-	"circle_compensation_speed": [
-		"200"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers": [
-		"Bambu Lab A1 mini 0.4 nozzle",
-		"Bambu Lab A1 mini 0.6 nozzle",
-		"Bambu Lab A1 mini 0.8 nozzle",
-		"Bambu Lab A1 0.4 nozzle",
-		"Bambu Lab A1 0.6 nozzle",
-		"Bambu Lab A1 0.8 nozzle",
-		"Bambu Lab P1P 0.4 nozzle",
-		"Bambu Lab P1P 0.6 nozzle",
-		"Bambu Lab P1P 0.8 nozzle",
-		"Bambu Lab P1S 0.4 nozzle",
-		"Bambu Lab P1S 0.6 nozzle",
-		"Bambu Lab P1S 0.8 nozzle",
-		"Bambu Lab X1 0.4 nozzle",
-		"Bambu Lab X1 0.6 nozzle",
-		"Bambu Lab X1 0.8 nozzle",
-		"Bambu Lab X1 Carbon 0.4 nozzle",
-		"Bambu Lab X1 Carbon 0.6 nozzle",
-		"Bambu Lab X1 Carbon 0.8 nozzle",
-		"Bambu Lab X1E 0.4 nozzle",
-		"Bambu Lab X1E 0.6 nozzle",
-		"Bambu Lab X1E 0.8 nozzle",
-		"Bambu Lab H2D 0.4 nozzle",
-		"Bambu Lab H2D 0.6 nozzle",
-		"Bambu Lab H2D 0.8 nozzle",
-		"Bambu Lab H2D Pro 0.4 nozzle",
-		"Bambu Lab H2D Pro 0.6 nozzle",
-		"Bambu Lab H2D Pro 0.8 nozzle",
-		"Bambu Lab H2S 0.4 nozzle",
-		"Bambu Lab H2S 0.6 nozzle",
-		"Bambu Lab H2S 0.8 nozzle",
-		"Bambu Lab P2S 0.4 nozzle",
-		"Bambu Lab P2S 0.6 nozzle",
-		"Bambu Lab P2S 0.8 nozzle",
-		"Bambu Lab X2D 0.2 nozzle",
-		"Bambu Lab X2D 0.4 nozzle",
-		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"cool_plate_temp": [
-		"0"
-	],
-	"cool_plate_temp_initial_layer": [
-		"0"
-	],
-	"counter_coef_1": [
-		"0"
-	],
-	"counter_coef_2": [
-		"0.008"
-	],
-	"counter_coef_3": [
-		"-0.041"
-	],
-	"counter_limit_max": [
-		"0.033"
-	],
-	"counter_limit_min": [
-		"-0.035"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"diameter_limit": [
-		"50"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"30"
-	],
-	"eng_plate_temp_initial_layer": [
-		"30"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"filament_adhesiveness_category": [
-		"600"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cost": [
-		"82"
-	],
-	"filament_density": [
-		"1.1"
-	],
-	"filament_deretraction_speed": [
-		"40",
-		"40"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard"
-	],
-	"filament_flow_ratio": [
-		"1",
-		"1"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"3.9",
-		"5"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_notes": "File Version:2.3 - V.Pack:18_05_2026",
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"0",
-		"0"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"1",
-		"1"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"40",
-		"40"
-	],
-	"filament_scarf_gap": [
-		"15%"
-	],
-	"filament_scarf_height": [
-		"10%"
-	],
-	"filament_scarf_length": [
-		"10"
-	],
-	"filament_scarf_seam_type": [
-		"none"
-	],
-	"filament_settings_id": [
-		"addnorth TPU Pro Matte 95A"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode {if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200 {elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150 {elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50 {endif} {if activate_air_filtration[current_extruder] && support_air_filtration} M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} {endif}"
-	],
-	"filament_type": [
-		"TPU"
-	],
-	"filament_vendor": [
-		"addnorth"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hole_coef_1": [
-		"0"
-	],
-	"hole_coef_2": [
-		"-0.008"
-	],
-	"hole_coef_3": [
-		"0.23415"
-	],
-	"hole_limit_max": [
-		"0.22"
-	],
-	"hole_limit_min": [
-		"0.088"
-	],
-	"hot_plate_temp": [
-		"35"
-	],
-	"hot_plate_temp_initial_layer": [
-		"35"
-	],
-	"impact_strength_z": [
-		"10"
-	],
-	"nozzle_temperature": [
-		"240",
-		"240"
-	],
-	"nozzle_temperature_initial_layer": [
-		"235",
-		"235"
-	],
-	"nozzle_temperature_range_high": [
-		"250"
-	],
-	"nozzle_temperature_range_low": [
-		"230"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"overhang_threshold_participating_cooling": [
-		"95%"
-	],
-	"pre_start_fan_time": [
-		"2"
-	],
-	"pressure_advance": [
-		"0.02"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"10"
-	],
-	"slow_down_min_speed": [
-		"10"
-	],
-	"supertack_plate_temp": [
-		"0"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"0"
-	],
-	"temperature_vitrification": [
-		"50"
-	],
-	"textured_plate_temp": [
-		"35"
-	],
-	"textured_plate_temp_initial_layer": [
-		"35"
-	],
-	"version": "2.0.0.77"
-}

resources/profiles/Blocks.json

@@ -1,6 +1,6 @@
 {
 	"name": "Blocks",
-	"version": "02.04.00.02",
+	"version": "02.04.00.01",
 	"force_update": "0",
 	"description": "Blocks configurations",
 	"machine_model_list": [

resources/profiles/Blocks/filament/Blocks Generic ABS.json

@@ -85,8 +85,10 @@
 		"BLOCKS RD50 V2 0.4 nozzle",
 		"BLOCKS RD50 V2 0.6 nozzle",
 		"BLOCKS RD50 V2 0.8 nozzle",
+		"BLOCKS RD50 V2",
 		"BLOCKS RF50 0.4 nozzle",
 		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle"
+		"BLOCKS RF50 0.8 nozzle",
+		"BLOCKS RF50"
 	]
 }

resources/profiles/Blocks/filament/Blocks Generic ASA-CF.json

@@ -85,8 +85,10 @@
 		"BLOCKS RD50 V2 0.4 nozzle",
 		"BLOCKS RD50 V2 0.6 nozzle",
 		"BLOCKS RD50 V2 0.8 nozzle",
+		"BLOCKS RD50 V2",
 		"BLOCKS RF50 0.4 nozzle",
 		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle"
+		"BLOCKS RF50 0.8 nozzle",
+		"BLOCKS RF50"
 	]
 }

resources/profiles/Blocks/filament/Blocks Generic ASA.json

@@ -85,8 +85,10 @@
 		"BLOCKS RD50 V2 0.4 nozzle",
 		"BLOCKS RD50 V2 0.6 nozzle",
 		"BLOCKS RD50 V2 0.8 nozzle",
+		"BLOCKS RD50 V2",
 		"BLOCKS RF50 0.4 nozzle",
 		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle"
+		"BLOCKS RF50 0.8 nozzle",
+		"BLOCKS RF50"
 	]
 }

resources/profiles/Blocks/filament/Blocks Generic PA-CF.json

@@ -91,8 +91,10 @@
 		"BLOCKS RD50 V2 0.4 nozzle",
 		"BLOCKS RD50 V2 0.6 nozzle",
 		"BLOCKS RD50 V2 0.8 nozzle",
+		"BLOCKS RD50 V2",
 		"BLOCKS RF50 0.4 nozzle",
 		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle"
+		"BLOCKS RF50 0.8 nozzle",
+		"BLOCKS RF50"
 	]
 }

resources/profiles/Blocks/filament/Blocks Generic PA.json

@@ -16,8 +16,10 @@
 		"BLOCKS RD50 V2 0.4 nozzle",
 		"BLOCKS RD50 V2 0.6 nozzle",
 		"BLOCKS RD50 V2 0.8 nozzle",
+		"BLOCKS RD50 V2",
 		"BLOCKS RF50 0.4 nozzle",
 		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle"
+		"BLOCKS RF50 0.8 nozzle",
+		"BLOCKS RF50"
 	]
 }

resources/profiles/Blocks/filament/Blocks Generic PC.json

@@ -16,8 +16,10 @@
 		"BLOCKS RD50 V2 0.4 nozzle",
 		"BLOCKS RD50 V2 0.6 nozzle",
 		"BLOCKS RD50 V2 0.8 nozzle",
+		"BLOCKS RD50 V2",
 		"BLOCKS RF50 0.4 nozzle",
 		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle"
+		"BLOCKS RF50 0.8 nozzle",
+		"BLOCKS RF50"
 	]
 }

resources/profiles/Blocks/filament/Blocks Generic PETG.json

@@ -87,11 +87,14 @@
 		"BLOCKS Pro S100 0.8 nozzle",
 		"BLOCKS Pro S100 1.0 nozzle",
 		"BLOCKS Pro S100 1.2 nozzle",
+		"BLOCKS Pro S100",
 		"BLOCKS RD50 V2 0.4 nozzle",
 		"BLOCKS RD50 V2 0.6 nozzle",
 		"BLOCKS RD50 V2 0.8 nozzle",
+		"BLOCKS RD50 V2",
 		"BLOCKS RF50 0.4 nozzle",
 		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle"
+		"BLOCKS RF50 0.8 nozzle",
+		"BLOCKS RF50"
 	]
 }

resources/profiles/Blocks/filament/Blocks Generic PLA-CF.json

@@ -22,8 +22,10 @@
 		"BLOCKS RD50 V2 0.4 nozzle",
 		"BLOCKS RD50 V2 0.6 nozzle",
 		"BLOCKS RD50 V2 0.8 nozzle",
+		"BLOCKS RD50 V2",
 		"BLOCKS RF50 0.4 nozzle",
 		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle"
+		"BLOCKS RF50 0.8 nozzle",
+		"BLOCKS RF50"
 	]
 }

resources/profiles/Blocks/filament/Blocks Generic PLA.json

@@ -45,11 +45,14 @@
 		"BLOCKS Pro S100 0.8 nozzle",
 		"BLOCKS Pro S100 1.0 nozzle",
 		"BLOCKS Pro S100 1.2 nozzle",
+		"BLOCKS Pro S100",
 		"BLOCKS RD50 V2 0.4 nozzle",
 		"BLOCKS RD50 V2 0.6 nozzle",
 		"BLOCKS RD50 V2 0.8 nozzle",
+		"BLOCKS RD50 V2",
 		"BLOCKS RF50 0.4 nozzle",
 		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle"
+		"BLOCKS RF50 0.8 nozzle",
+		"BLOCKS RF50"
 	]
 }

resources/profiles/Blocks/filament/Blocks Generic PVA.json

@@ -16,8 +16,10 @@
 		"BLOCKS RD50 V2 0.4 nozzle",
 		"BLOCKS RD50 V2 0.6 nozzle",
 		"BLOCKS RD50 V2 0.8 nozzle",
+		"BLOCKS RD50 V2",
 		"BLOCKS RF50 0.4 nozzle",
 		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle"
+		"BLOCKS RF50 0.8 nozzle",
+		"BLOCKS RF50"
 	]
 }

resources/profiles/Blocks/filament/Blocks Generic TPU.json

@@ -60,11 +60,14 @@
 		"BLOCKS Pro S100 0.8 nozzle",
 		"BLOCKS Pro S100 1.0 nozzle",
 		"BLOCKS Pro S100 1.2 nozzle",
+		"BLOCKS Pro S100",
 		"BLOCKS RD50 V2 0.4 nozzle",
 		"BLOCKS RD50 V2 0.6 nozzle",
 		"BLOCKS RD50 V2 0.8 nozzle",
+		"BLOCKS RD50 V2",
 		"BLOCKS RF50 0.4 nozzle",
 		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle"
+		"BLOCKS RF50 0.8 nozzle",
+		"BLOCKS RF50"
 	]
 }

resources/profiles/Blocks/process/0.12mm Fine 0.4 nozzle @Blocks_RD50_V2.json

@@ -10,6 +10,7 @@
 	"top_shell_layers": "6",
 	"top_solid_infill_flow_ratio": "0.96",
 	"compatible_printers": [
+		"BLOCKS RD50 V2",
 		"BLOCKS RD50 V2 0.4 nozzle"
 	]
 }

resources/profiles/Blocks/process/0.12mm Fine 0.4 nozzle @Blocks_RF50.json

@@ -10,6 +10,7 @@
 	"bottom_shell_layers": "6",
 	"top_shell_layers": "6",
 	"compatible_printers": [
+		"BLOCKS RF50",
 		"BLOCKS RF50 0.4 nozzle"
 	],
 	"sparse_infill_speed": "300",

resources/profiles/Blocks/process/0.16mm Optimal 0.4 nozzle @Blocks_RD50_V2.json

@@ -10,6 +10,7 @@
 	"top_shell_layers": "5",
 	"top_solid_infill_flow_ratio": "0.96",
 	"compatible_printers": [
+		"BLOCKS RD50 V2",
 		"BLOCKS RD50 V2 0.4 nozzle"
 	]
 }

resources/profiles/Blocks/process/0.16mm Optimal 0.4 nozzle @Blocks_RF50.json

@@ -10,6 +10,7 @@
 	"bottom_shell_layers": "5",
 	"top_shell_layers": "5",
 	"compatible_printers": [
+		"BLOCKS RF50",
 		"BLOCKS RF50 0.4 nozzle"
 	],
 	"sparse_infill_speed": "300",

resources/profiles/Blocks/process/0.20mm Optimal 0.6 nozzle @Blocks_RD50_V2.json

@@ -10,6 +10,7 @@
 	"top_shell_layers": "4",
 	"top_solid_infill_flow_ratio": "0.96",
 	"compatible_printers": [
+		"BLOCKS RD50 V2",
 		"BLOCKS RD50 V2 0.6 nozzle"
 	]
 }

resources/profiles/Blocks/process/0.20mm Optimal 0.6 nozzle @Blocks_RF50.json

@@ -10,6 +10,7 @@
 	"bottom_shell_layers": "4",
 	"top_shell_layers": "4",
 	"compatible_printers": [
+		"BLOCKS RF50",
 		"BLOCKS RF50 0.6 nozzle"
 	],
 	"sparse_infill_speed": "300",

resources/profiles/Blocks/process/0.20mm Standard 0.4 nozzle @Blocks.json

@@ -9,6 +9,7 @@
 	"bottom_shell_layers": "4",
 	"top_shell_layers": "5",
 	"compatible_printers": [
+		"BLOCKS Pro S100",
 		"BLOCKS Pro S100 0.4 nozzle"
 	]
 }

resources/profiles/Blocks/process/0.20mm Standard 0.4 nozzle @Blocks_RD50_V2.json

@@ -10,6 +10,7 @@
 	"top_shell_layers": "5",
 	"top_solid_infill_flow_ratio": "0.96",
 	"compatible_printers": [
+		"BLOCKS RD50 V2",
 		"BLOCKS RD50 V2 0.4 nozzle"
 	]
 }

resources/profiles/Blocks/process/0.20mm Standard 0.4 nozzle @Blocks_RF50.json

@@ -14,6 +14,7 @@
 	"bottom_shell_layers": "4",
 	"top_shell_layers": "5",
 	"compatible_printers": [
+		"BLOCKS RF50",
 		"BLOCKS RF50 0.4 nozzle"
 	],
 	"sparse_infill_speed": "300",