juli/OrcaSlicer
1
1
Fork 0
mirror of https://github.com/OrcaSlicer/OrcaSlicer.git synced 2026-07-02 08:31:13 +00:00
Code Issues Packages Projects Releases Wiki Activity

Add unit test for per-extruder motion limit

Browse Source
This commit is contained in:
Noisyfox
2026-06-25 12:44:43 +08:00
parent b7240ab1c6
commit eae002da13
1 changed files with 132 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

132
tests/fff_print/test_printgcode.cpp
View File

@@ -498,3 +498,135 @@ TEST_CASE("Machine envelope emits max limit among used extruders", "[PrintGCode]
}
}
}
// Verify that the EXTRUDER_LIMIT macro (GCodeWriter.cpp) correctly:
// 1) Uses the active extruder's specific limit when filament() is known.
// 2) Falls back to the maximum of all extruder limits when filament() is nullptr.
//
// These two behaviours were introduced in:
// - "Use per-extruder motion limit" (1ab34a7454)
// - "Use max limit when current extruder is unknown" (b7240ab1c6)
TEST_CASE("EXTRUDER_LIMIT per-extruder clamping and max fallback", "[PrintGCode][MachineEnvelope]")
{
// --- Build config with 2 extruders that have different machine limits ---
// Extruder 0: low limits
// Extruder 1: high limits
DynamicPrintConfig config = DynamicPrintConfig::full_print_config();
config.set_key_value("emit_machine_limits_to_gcode", new ConfigOptionBool(true));
config.set_key_value("gcode_flavor", new ConfigOptionEnum<GCodeFlavor>(gcfMarlinFirmware));
config.set_key_value("gcode_comments", new ConfigOptionBool(true));
config.set_key_value("machine_start_gcode", new ConfigOptionString(""));
config.set_key_value("layer_height", new ConfigOptionFloat(0.2));
config.set_key_value("initial_layer_print_height", new ConfigOptionFloat(0.2));
config.set_key_value("initial_layer_line_width", new ConfigOptionFloatOrPercent(0, false));
config.set_key_value("z_hop", new ConfigOptionFloats({0}));
config.set_key_value("print_sequence", new ConfigOptionEnum<PrintSequence>(PrintSequence::ByObject));
// 2 extruders, 2 filaments
config.set_key_value("nozzle_diameter", new ConfigOptionFloats({0.4, 0.4}));
config.set_key_value("printer_extruder_id", new ConfigOptionInts({1, 2}));
config.set_key_value("printer_extruder_variant", new ConfigOptionStrings({"Direct Drive Standard", "Direct Drive Standard"}));
config.set_key_value("filament_diameter", new ConfigOptionFloats({1.75, 1.75}));
config.set_key_value("filament_colour", new ConfigOptionStrings({"#FF0000", "#00FF00"}));
config.set_key_value("filament_type", new ConfigOptionStrings({"PLA", "PLA"}));
config.option<ConfigOptionEnum<FilamentMapMode>>("filament_map_mode", true)->value = fmmManual;
config.set_key_value("filament_map", new ConfigOptionInts({1, 2}));
config.set_key_value("default_filament_colour", new ConfigOptionStrings({"#FF0000", "#00FF00"}));
config.set_key_value("nozzle_temperature", new ConfigOptionInts({210, 210}));
config.set_key_value("nozzle_temperature_range_low", new ConfigOptionInts({190, 190}));
config.set_key_value("nozzle_temperature_range_high", new ConfigOptionInts({240, 240}));
config.set_key_value("flush_multiplier", new ConfigOptionFloats({1}));
config.set_key_value("flush_volumes_matrix", new ConfigOptionFloats({0, 0, 0, 0}));
// --- Machine limits (stride-2: e0_n, e0_s, e1_n, e1_s) ---
// Extruder 0 has LOW limits, Extruder 1 has HIGH limits.
config.set_key_value("machine_max_acceleration_x", new ConfigOptionFloats({500, 0, 1000, 0}));
config.set_key_value("machine_max_acceleration_y", new ConfigOptionFloats({500, 0, 1000, 0}));
config.set_key_value("machine_max_acceleration_z", new ConfigOptionFloats({100, 0, 200, 0}));
config.set_key_value("machine_max_acceleration_e", new ConfigOptionFloats({5000, 0, 5000, 0}));
config.set_key_value("machine_max_acceleration_extruding", new ConfigOptionFloats({500, 0, 2000, 0}));
config.set_key_value("machine_max_acceleration_retracting", new ConfigOptionFloats({600, 0, 2000, 0}));
config.set_key_value("machine_max_acceleration_travel", new ConfigOptionFloats({700, 0, 2500, 0}));
config.set_key_value("machine_max_speed_x", new ConfigOptionFloats({100, 0, 200, 0}));
config.set_key_value("machine_max_speed_y", new ConfigOptionFloats({110, 0, 210, 0}));
config.set_key_value("machine_max_speed_z", new ConfigOptionFloats({10, 0, 30, 0}));
config.set_key_value("machine_max_speed_e", new ConfigOptionFloats({50, 0, 80, 0}));
config.set_key_value("machine_max_jerk_x", new ConfigOptionFloats({5, 0, 15, 0}));
config.set_key_value("machine_max_jerk_y", new ConfigOptionFloats({6, 0, 16, 0}));
config.set_key_value("machine_max_jerk_z", new ConfigOptionFloats({0.4, 0, 0.8, 0}));
config.set_key_value("machine_max_jerk_e", new ConfigOptionFloats({3, 0, 8, 0}));
config.set_key_value("machine_max_junction_deviation", new ConfigOptionFloats({0.02, 0, 0.08, 0}));
// --- Print acceleration: 1500 mm/s² ---
// Exceeds extruder 0's limit (500) → should be clamped to 500.
// Does NOT exceed extruder 1's limit (2000) → passes through as 1500.
config.set_key_value("default_acceleration", new ConfigOptionFloats({1500, 1500}));
config.set_key_value("outer_wall_acceleration", new ConfigOptionFloats({1500, 1500}));
config.set_key_value("inner_wall_acceleration", new ConfigOptionFloats({1500, 1500}));
config.set_key_value("top_surface_acceleration", new ConfigOptionFloats({1500, 1500}));
config.set_key_value("initial_layer_acceleration", new ConfigOptionFloats({1500, 1500}));
config.set_key_value("travel_acceleration", new ConfigOptionFloats({1500, 1500}));
// Model: two objects assigned to different extruders
Model model;
auto* obj1 = model.add_object();
obj1->add_volume(mesh(TestMesh::cube_20x20x20));
obj1->add_instance();
auto* obj2 = model.add_object();
obj2->add_volume(mesh(TestMesh::cube_20x20x20));
obj2->add_instance();
obj2->config.set_key_value("extruder", new ConfigOptionInt(2)); // 0-based index 1
Print print;
arrange_objects(model, InfiniteBed{}, ArrangeParams{scaled(min_object_distance(config))});
for (auto* mo : model.objects) {
mo->ensure_on_bed();
print.auto_assign_extruders(mo);
}
print.apply(model, config);
print.validate();
print.set_status_silent();
print.process();
std::string gcode = Slic3r::Test::gcode(print);
SECTION("Preamble: max limit among used extruders") {
THEN("M201 uses max (extruder 1's) acceleration values") {
REQUIRE(gcode.find("M201 X1000 Y1000 Z200 E5000") != std::string::npos);
}
THEN("M204 uses max extruding/retracting/travel") {
REQUIRE(gcode.find("M204 P2000 R2000 T2500") != std::string::npos);
}
THEN("M205 uses max jerk values") {
REQUIRE(gcode.find("M205 X15.00 Y16.00 Z0.80 E8.00") != std::string::npos);
}
}
SECTION("Preamble: EXTRUDER_LIMIT falls back to max when no filament is active") {
// set_junction_deviation() is called during preamble with no active filament.
// EXTRUDER_LIMIT(m_max_junction_deviation) → filament() == nullptr → max of all (0.08).
THEN("M205 J uses max junction deviation") {
REQUIRE(gcode.find("M205 J0.080") != std::string::npos);
}
}
SECTION("Print: extruder 0 acceleration clamped to its specific limit") {
// Extruder 0 machine limit = 500. Print accel = 1500 > 500 → clamped to 500.
THEN("M204 P500 appears (extruder 0 clamped)") {
REQUIRE(gcode.find("M204 P500") != std::string::npos);
}
THEN("M204 T700 appears (extruder 0 travel clamped)") {
REQUIRE(gcode.find("M204 T700") != std::string::npos);
}
}
SECTION("Print: extruder 1 acceleration NOT clamped to extruder 0's limit") {
// Extruder 1 machine limit = 2000. Print accel = 1500 < 2000 → not clamped.
THEN("M204 P1500 appears (extruder 1 not clamped to 500)") {
REQUIRE(gcode.find("M204 P1500") != std::string::npos);
}
}
}