Print/Delete support for .gcode.3mf files

Follow-up to the feature/OrcaSonar review. Scopes the new behavior to the
OrcaSonar agent, fixes several AMS-sync and lifecycle bugs, and makes the
MQTT tests run in CI. Non-OrcaSonar agents keep their existing behavior.

## Changes

Discovery
- Gate the background SSDP scan to a configured OrcaSonar machine instead of
  running for every non-BBL profile; drive discovery on demand from the
  machine-select popup and back off idle rounds from 5s to 60s.
- Add NSLocalNetworkUsageDescription and NSBonjourServices to both macOS
  Info.plist templates.

AMS sync
- Resolve id-less printer-set trays by material type in get_ams_cobox_infos
  and the sidebar badge loop, matching sync_ams_list, so combo arrays and
  badges stay aligned.
- Keep a printer-set tray that resolved by type out of the "unknown or
  incompatible filaments" dialog.

AMS device UI
- Gate the "Empty" tray classification, and the editable temperature fields,
  to the OrcaSonar agent; Bambu keeps "?" and read-only presets.
- Validate AMS material temps on confirm: reject out-of-range values and
  min > max before the command is sent.

Storage tab
- Bind the show/hide handler on the panel's ancestors (StoragePanel and
  MonitorPanel) and unbind on destruction, so the Bambu file system stops
  when the tab is left.

Transport
- Load /etc/ssl/cert.pem on macOS in add_platform_root_certificates, after
  set_default_verify_paths.
- Release lifecycle_mutex before start()'s connect wait so stop() can cancel
  the attempt and signal completion instead of stalling the UI thread.

Localization
- Add OrcaFilesPanel.cpp to list.txt and regenerate the catalogs.

## Tests
- Un-hide the loopback MockBroker integration tests (ephemeral port, no
  network) so ctest registers and runs them.
- Mock broker tracks SUBSCRIBE/UNSUBSCRIBE and delivers push_report only to a
  subscribed topic; the reconnect test asserts the re-SUBSCRIBE.
- Add bbl empty-tray cases, an AMS combo-alignment case, and unknowns
  assertions to the AMS sync tests.

cmake/modules/MacOSXBundleInfo.plist.in

@@ -131,6 +131,13 @@
 	<true/>
 	<key>NSHumanReadableCopyright</key>
 	<string>${MACOSX_BUNDLE_COPYRIGHT}</string>
+	<key>NSLocalNetworkUsageDescription</key>
+	<string>OrcaSlicer uses your local network to discover and connect to printers.</string>
+	<key>NSBonjourServices</key>
+	<array>
+		<string>_octoprint._tcp</string>
+		<string>_http._tcp</string>
+	</array>
 	<key>NSAppTransportSecurity</key>  
 	<dict>
 		<!-- Disable App Transport Security. Resolves https://github.com/OrcaSlicer/OrcaSlicer/issues/791 -->

docs/CAD/design/SKETCHER_TOOL_ARCHITECTURE.md

@@ -262,9 +262,9 @@ and a band is not a "gesture" in the `CadLevel::Gesture` sense because nothing h
 |---|---|---|---|---|---|
 | `Move` | — | `update_hover` / `update_solid_hover` (**non-consuming**, returns false) | — | passthrough | hover only asks for a repaint, `:10022-10025` |
 | `LeftDown` | orbit may begin | latch press, **return false** | — | consume-or-orbit is the canvas's call | `:10058-10063`; consuming here killed orbit once already |
-| `LeftDrag` > 8 px | — | start + drive band, **consume**, when Shift is held or the left button has no camera action | — | otherwise the left button's drag action (Preferences > Control) | the band is Prepare's Shift+left-drag rectangle selection |
+| `LeftDrag` > 8 px | — | start + drive band, **consume** | — | no longer orbits in this canvas | middle-drag orbits, right-drag pans (`:10013-10016`) |
 | `LeftUp` | — | commit pick **or** resolve band | — | — | `:10035-10041` |
-| `MiddleDrag` / `RightDrag` | — | must not see it | — | the button's drag action (Preferences > Control) | camera gestures never reach the FSM; a right press reaches the tool only once its release shows it was a click |
+| `MiddleDrag` / `RightDrag` | — | must not see it | — | orbit / pan | camera gestures never reach the FSM |
 | `RightClick` | — | — | offer menu | — | `snaporca-xmh6` open: a right-click that only clears the sketch selection eats the offer |
 | `Esc` | — | — | `escape()` ladder | — | one route whatever holds focus (`:4228-4231`) |
 | `Del` / `Backspace` | — | `delete_selected_or_last_sketch_entity()` | char hook | — | `:4260` |

docs/HLSD/design-tab.md

@@ -135,7 +135,7 @@ contract between them is stated in code rather than spread across handlers.
 | --- | --- | --- |
 | `Transient` | a value field or a popup menu | closes it; the tool stays armed |
 | `Gesture` | an uncommitted delta — an entity being drawn, a body being dragged | reverts it; committed work is untouched |
-| `Tool` | a feature card, Sketch waiting for its plane, an armed sketch tool, a constrain session | exits it; drawn entities survive |
+| `Tool` | a feature card, an armed sketch tool, a constrain session | exits it; drawn entities survive |
 | `Idle` | nothing transient | clears the selection, a Feature tree or Bodies row included; leaves a sketch session only if it is empty |
 
 `cad_escape_level()` is a `constexpr` free function over a POD of four booleans rather than a
@@ -149,66 +149,26 @@ explicit selection, the sketch ribbon's Cancel, which asks first, or `Ctrl+Z`. A
 *session* is deliberately not a `Tool` level; it is the environment the `Idle` level lives in,
 which makes the destructive path unrepresentable rather than merely unlikely.
 
-A body Move is the one `Gesture` that outlives the press: its gizmo stays up between drags until
-Confirm keeps the placement or `Esc` or Cancel puts the body back. Until then the selection is
-held — a click off the gizmo only steers the camera — and undo is refused, since the placement
-is not in the history. Anything that starts another edit (a feature card, a sketch, placing
-imported art or text, another body's Move, a rebuild) keeps the placement, as switching gizmos
-keeps a move in Prepare. The panel ends the Move in one place (`DesignPanel::end_body_move`), so
-the gizmo, the Move / Rotate card and the ✓/✗ cannot outlive one another.
-
 Right-click is read at button-up against one budget, 3 px of drift, applied to the whole press
 rather than to its end points: a press that wandered past the budget at any moment is
 navigation, even if it comes back to where it started, which is what stops a slow, careful
 orbit from ending in a menu. There is no time budget — a gesture that means something different
 when it is slow is exactly what the interaction charter rules out. The raycast uses the press
-position, not the release. The sketch tool sees a right press only once the release has shown it
-was a click: the press itself goes to the camera, which may pan or orbit with that button, and the
-canvas replays it to the tool on a stationary release. A tool that uses the click (to terminate a
-chain, say) keeps the menu closed. Past either budget the event is navigation, and navigation
-does not transition the state machine.
+position, not the release. An armed sketch tool that already consumed the right
+button (to terminate a chain, say) declines to also open a menu, through a read-and-clear flag.
+Past either budget the event is navigation, and navigation does not transition the state
+machine.
 
 Navigation itself is Prepare's: the camera reads the drag actions set in Preferences > Control
-for each button, and in the Touchpad camera style a move with Alt held orbits and one with Shift
-held pans, whatever tool is armed. The left button is shared with picking and drawing, so a tool
-handle or a press that draws takes it first, as a gizmo does in Prepare; a whole body is swept
-with a rectangle on plain left-drag only while no camera action is assigned to the left button,
-and with Shift+left-drag otherwise — Prepare's own rectangle selection.
+for each button. The left button is shared with picking, so a whole body is swept with a
+rectangle on plain left-drag only while no camera action is assigned to it, and with
+Shift+left-drag otherwise — Prepare's own rectangle selection.
 
-Entering a sketch changes two things at once so the mode is legible: a banner above the
+Entering a sketch changes three things at once so the mode is legible: a banner above the
 canvas (a sibling of the canvas, not a child over it — on GTK a child window over a
-`wxGLCanvas` is a native window and does not reliably stack over GL), and `N` to look normal to
-the plane. The printer bed stays: there is no sketch grid, so the plate grid is the only ground
-reference a sketch has. Code that changes either belongs with a change to this section.
-
-Sketch mode is never entered without a plane under it, so the banner, the sketch keys and the
-sketch offer always have a session to act on. Sketch on a picked flat face or reference plane opens
-the session on it at once. With nothing picked it stays in Feature mode and waits for one — an
-armed `Tool`, left with `Esc` or ✗, and ended by anything that starts another edit — and the
-reference plane or flat face clicked next opens the session. A picked plane is a selection like a
-face: the sketch on it uses it up, and `Esc` or a click on nothing lets go of it, so a plane that
-can no longer be seen never decides where the next sketch goes.
-
-The reference planes — XY, XZ and YZ through the modeling origin, with their half-axes — are
-drawn on demand, because three translucent squares over every model are noise once they are not
-the thing being picked. Sketch brings them up while it waits for a plane, which is exactly when
-they are picked, and the session the pick opens takes them away; a live session draws none. The
-Feature tree's Origin row keeps them up outside a sketch. Its state is a view preference in
-AppConfig rather than part of the recipe, so it costs the project format nothing. The Plane tool
-keeps its own rule: the planes and the datums as Offset bases, and nothing for the other methods,
-where a click on a plane would rewrite the datum's references. The `P` and `A` keys are a
-separate, unpickable view helper and do not follow the Origin row.
-
-The Bed row, under the Origin row, is the printer bed's switch in the same way: it draws or hides
-the bed and its plate grid in every mode. It is a view preference in AppConfig too, and the bed is
-shown until it is turned off.
-
-The two rows are view switches, not history, and the tree says so: they sit unframed on the Feature
-tree's card, above the features' own framed list, and stay put while the features scroll. A click
-never selects either row, since a selected Origin or Bed would have nothing to edit, move or
-delete; the eye and the right-click menu are the only targets, and a row's label dims while its
-thing is hidden, as a hidden body's does. Because the block never takes the focus, `Ctrl+Shift+O`
-and `Ctrl+Shift+B` flip the Origin and the Bed from the keyboard.
+`wxGLCanvas` is a native window and does not reliably stack over GL), the printer bed muted so
+a plate grid is never read as a sketch grid, and `N` to look normal to the plane. Code that
+changes any of the three belongs with a change to this section.
 
 ## Rendering the bodies
 
@@ -229,15 +189,6 @@ degenerate edges are left out (`GeometryEngine::display_edges`), and the polylin
 once per shape, keyed by its `TShape`, because a recompute that leaves a body unchanged is the
 common case.
 
-While a feature card is open, its preview ghost is the whole model the candidate would produce,
-drawn translucent over the bodies, so every face the feature leaves alone is in both at the same
-depth. The ghost is drawn with a depth bias that pushes it back (`GLVolume::depth_bias`), so on a shared face
-the body always wins instead of the two copies z-fighting, and the ghost shows only where the
-result reaches past the bodies. Material a feature removes lies inside the old solid and would not
-show at all, so the tools whose result mostly coincides with the body — Fillet/Chamfer, Draft,
-Hole and the Mate hover — hide the bodies once the preview is valid and draw the result alone,
-opaque.
-
 ## Showing what is selected
 
 A selection is drawn on the faces it names, never as a tint over the body: a translucent
@@ -263,17 +214,7 @@ replay costs up to a recompute, so the panel finds the faces once per row and to
 generation, off the UI thread, and only while no feature card is open. One selection is live at
 a time: a viewport pick clears the feature row and a feature row clears the viewport pick, as the
 Feature tree and Bodies list do between themselves. `Esc`, a click on empty space and an
-empty rubber band all let go of it, whichever list or pick made it — except while a body Move is
-open, which holds the selection until it ends (see the interaction contract).
-
-Zoom to selection, on a Feature tree or Bodies row and in its right-click menu, frames one thing
-along the current view direction, as the canvas's Fit button frames the selection. On a body it
-frames the body whole, hidden or not, from its display mesh: the viewport never selects a hidden
-body, so the selection cannot stand in for it. On a sketch it frames the sketch's own geometry,
-drawn, consumed or suppressed; on any other feature, the faces the feature made, found as the row
-highlight finds them and from the same cache. From the offer it frames whatever the selection is,
-a body again included. A feature that is not a sketch and makes no faces, such as a datum plane
-or a suppressed Extrude, has no Zoom to selection.
+empty rubber band all let go of it, whichever list or pick made it.
 
 ## Following the app
 
@@ -290,21 +231,9 @@ The tab is a page of Orca's main window and answers to the same settings as Prep
 - **Sidebar icons.** Every clickable icon in the sidebar shows a hover chip. The card-header and
   constraint-row buttons are Orca's self-painted `Button`, because a native button cannot take a
   hover background on macOS. The Feature tree and Bodies lists are a custom-drawn
-  `DesignRowList` rather than a `wxTreeCtrl`, so each row carries its own actions — Zoom to
-  selection, Edit, Show/hide and Delete on a feature, Zoom to selection, Move, Show/hide and
-  Delete on a body, and only Show/hide on the Origin and Bed rows, a separate non-selectable list
-  above the features — and the eye shows whether that row is hidden. A feature with nothing to
-  frame keeps a blank cell where Zoom to selection would be, so every icon stays in its column.
-- **Plates.** This is the one thing the tab does not follow. The canvas has a bed of its own at
-  the printer bed's home position, whichever plate Prepare has current, and a new document's
-  modeling origin is that bed's centre. A bed that followed the current plate would slide out
-  from under a design: the origin is fixed once per document, baked into every sketch plane and
-  saved in the recipe, while the current plate can change between visits. Commit to Plate does
-  not need it either, since the committed object is placed on an empty spot of the current
-  plate. What the canvas does read from the plate is moved onto its bed: the exclude areas, the
-  plate box the camera orbits about when nothing is picked (`GLCanvas3D::_current_plate_box`),
-  and the first view, which starts from Prepare's camera turned to the tab's iso view: the CAD
-  isometric from the front-right corner that Home returns to, not Prepare's front-left one.
+  `DesignRowList` rather than a `wxTreeCtrl`, so each row carries its own actions — Edit,
+  Show/hide and Delete on a feature, Move, Show/hide and Delete on a body — and the eye shows
+  whether that row is hidden.
 - **Viewport text.** The status line and the active tool's values are drawn by the canvas in
   its ImGui pass, so they go with the canvas: a top-level window over GL does not follow its
   frame and was left floating over other applications.
@@ -327,12 +256,12 @@ permanent row index, verbs that do not apply shown disabled **in place with thei
 rather than removed. The invariant is that a verb's row index is identical in every selection
 where it appears and that adding a verb never moves an existing one — the hand learns the
 position, so the menu is never re-sorted, compacted or adaptively ordered. Above the families
-sits one *flat* row, holding Rename, Color and Zoom to selection — what a selection is opened for
-most: its verbs are items of their own at the top of the menu rather than a family's submenu. It
-is appended after the eight, so it moved no existing index, and it reads the same from the
-viewport and from a row of the Bodies list.
+sits one *flat* row, holding Rename and Color — what a selection is opened for most: its verbs are
+items of their own at the top of the menu rather than a family's submenu. It is appended after
+the eight, so it moved no existing index, and it reads the same from the viewport and from a row
+of the Bodies list.
 
-An invariant across 93 verbs and 20 selection kinds does not survive by review, so the map
+An invariant across 92 verbs and 20 selection kinds does not survive by review, so the map
 exists once, as data: `scripts/CAD/tool_atlas.json` carries every verb with its row, key, icon,
 accepted selections, preconditions and refusal string, and `scripts/CAD/gen_offer_table.py`
 emits `src/slic3r/GUI/CAD/DesignOffer.hpp` from it. The header is checked in and never

docs/HLSD/prusa-indx-profiles.md

@@ -36,13 +36,8 @@ override is not available in these profiles. The source's `EXCLUDE_E_START` and
 `EXCLUDE_E_END` internal markers become comments rather than printer commands.
 
 Pressure-advance restoration and automatic pressure-advance emission use the
-selected filament preset's settings. The INDX filament presets include
-`fdm_filament_template_indx`, whose start G-code sets the filament's pressure
-advance with `M572` and then starts the firmware's automatic calibration with
-`M573 R`, the commands PrusaSlicer emits after a tool change; the station purge
-disables pressure advance before it. The template also carries Prusa's
-multi-tool ramming and a 10 mm³ minimal purge. These profiles do not impose
-machine-owned filament overrides. Dock-fan control retains the source's material and layer
+selected filament preset's settings. These profiles do not impose machine-owned
+filament overrides. Dock-fan control retains the source's material and layer
 conditions; shutdown parks the tool and turns off the used heaters and dock fan.
 
 ## Configuration boundaries

localization/i18n/OrcaSlicer.pot

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-10-05 10:49-0300\n"
+"POT-Creation-Date: 2026-10-06 13:42+0800\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -4046,6 +4046,9 @@ msgstr ""
 msgid "You need to select the material type and color first."
 msgstr ""
 
+msgid "The minimum temperature cannot be greater than the maximum temperature."
+msgstr ""
+
 #, possible-c-format, possible-boost-format
 msgid "Please input a valid value (K in %.1f~%.1f)"
 msgstr ""
@@ -5782,7 +5785,7 @@ msgstr ""
 msgid "Size:"
 msgstr ""
 
-#, possible-c-format, possible-boost-format
+#, possible-boost-format
 msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)."
 msgstr ""
 
@@ -6621,6 +6624,22 @@ msgstr ""
 msgid "File '%s' was lost! Please download it again."
 msgstr ""
 
+msgid "gcodes"
+msgstr ""
+
+msgid "Failed to delete the file from printer."
+msgstr ""
+
+#, possible-c-format, possible-boost-format
+msgid "Do you want to print the file '%s' from printer?"
+msgstr ""
+
+msgid "Print file"
+msgstr ""
+
+msgid "Failed to start the print job."
+msgstr ""
+
 #, possible-c-format, possible-boost-format
 msgid ""
 "File: %s\n"
@@ -9464,14 +9483,6 @@ msgstr ""
 msgid "Show incompatible/unsupported presets in the printer and filament dropdown lists. These presets cannot be selected."
 msgstr ""
 
-msgid "(Experimental) Use printer agents instead of print hosts"
-msgstr ""
-
-msgid ""
-"Route print jobs for non-Bambu printers through printer plug-in agents instead of the classic print-host upload flow.\n"
-"When disabled, OrcaSlicer uses the legacy print-host behavior."
-msgstr ""
-
 msgid "Experimental Features"
 msgstr ""
 
@@ -9483,6 +9494,14 @@ msgid ""
 "Highly experimental! Slow and may create artifact."
 msgstr ""
 
+msgid "Use printer agents instead of print hosts"
+msgstr ""
+
+msgid ""
+"Route print jobs for non-Bambu printers through printer plug-in agents instead of the classic print-host upload flow.\n"
+"When disabled, OrcaSlicer uses the legacy print-host behavior."
+msgstr ""
+
 msgid "Allow Abnormal Storage"
 msgstr ""
 
@@ -10188,6 +10207,12 @@ msgstr ""
 msgid "Clean Up"
 msgstr ""
 
+msgid "AMS filament mapping is not available for this printer. Clear the AMS mapping before printing."
+msgstr ""
+
+msgid "A filament used by this print has no AMS mapping. Assign it before printing."
+msgstr ""
+
 msgid "Preparing print job"
 msgstr ""
 
@@ -14779,6 +14804,12 @@ msgstr ""
 msgid "If the model has two parts that are symmetric about the Y axis, and you want these parts to have symmetric textures, please click this option on one of the parts."
 msgstr ""
 
+msgid "Fill pattern tops"
+msgstr ""
+
+msgid "Choose this option if you want to completely fill in the tops of the infill pattern"
+msgstr ""
+
 msgid "Infill combination - Max layer height"
 msgstr ""
 
@@ -26300,6 +26331,9 @@ msgstr ""
 msgid "An error occurred loading %s"
 msgstr ""
 
+msgid "/"
+msgstr ""
+
 #, possible-boost-format
 msgid "Load %1% to %2%"
 msgstr ""

localization/i18n/ca/OrcaSlicer_ca.po

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-10-05 10:49-0300\n"
+"POT-Creation-Date: 2026-10-06 13:42+0800\n"
 "PO-Revision-Date: 2025-03-15 10:55+0100\n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -4426,6 +4426,9 @@ msgstr "Estàs segur que vols esborrar la informació del filament?"
 msgid "You need to select the material type and color first."
 msgstr "Primer heu de seleccionar el tipus de material i el color."
 
+msgid "The minimum temperature cannot be greater than the maximum temperature."
+msgstr ""
+
 #, c-format, boost-format
 msgid "Please input a valid value (K in %.1f~%.1f)"
 msgstr "Introduïu un valor vàlid (K a %.1f~%.1f)"
@@ -6300,7 +6303,7 @@ msgid "Size:"
 msgstr "Mida:"
 
 # AI Translated
-#, c-format, boost-format
+#, boost-format
 msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)."
 msgstr "S'han trobat conflictes de rutes de G-code a la capa %d, Z = %.2lfmm. Si us plau, separeu els objectes conflictius més lluny ( %s <-> %s )."
 
@@ -7180,6 +7183,22 @@ msgstr "El fitxer .gcode.3mf no conté dades de G-code. Lamineu-lo amb Orca Slic
 msgid "File '%s' was lost! Please download it again."
 msgstr "L'arxiu '%s' s'ha perdut! Si us plau, descarregueu-lo de nou."
 
+msgid "gcodes"
+msgstr ""
+
+msgid "Failed to delete the file from printer."
+msgstr ""
+
+#, c-format, boost-format
+msgid "Do you want to print the file '%s' from printer?"
+msgstr ""
+
+msgid "Print file"
+msgstr ""
+
+msgid "Failed to start the print job."
+msgstr ""
+
 #, c-format, boost-format
 msgid ""
 "File: %s\n"
@@ -10420,18 +10439,6 @@ msgstr "Mostrar els perfils no compatibles"
 msgid "Show incompatible/unsupported presets in the printer and filament dropdown lists. These presets cannot be selected."
 msgstr "Mostra els perfils incompatibles o no compatibles a les llistes desplegables d'impressora i de filament. Aquests perfils no es poden seleccionar."
 
-# AI Translated
-msgid "(Experimental) Use printer agents instead of print hosts"
-msgstr "(Experimental) Utilitza agents d'impressora en lloc d'amfitrions d'impressió"
-
-# AI Translated
-msgid ""
-"Route print jobs for non-Bambu printers through printer plug-in agents instead of the classic print-host upload flow.\n"
-"When disabled, OrcaSlicer uses the legacy print-host behavior."
-msgstr ""
-"Envia els treballs d'impressió de les impressores que no són Bambu a través dels agents de connector d'impressora en lloc del flux clàssic de pujada a l'amfitrió d'impressió.\n"
-"Quan està desactivat, OrcaSlicer utilitza el comportament antic de l'amfitrió d'impressió."
-
 # AI Translated
 msgid "Experimental Features"
 msgstr "Funcions experimentals"
@@ -10448,6 +10455,17 @@ msgstr ""
 "Intenta conservar les característiques pintades (color/costura/suport/pell difusa, etc.) després de canviar la malla de l'objecte (com ara tallar, recarregar des del disc, simplificar, reparar, etc.).\n"
 "Molt experimental! És lent i pot generar defectes."
 
+msgid "Use printer agents instead of print hosts"
+msgstr ""
+
+# AI Translated
+msgid ""
+"Route print jobs for non-Bambu printers through printer plug-in agents instead of the classic print-host upload flow.\n"
+"When disabled, OrcaSlicer uses the legacy print-host behavior."
+msgstr ""
+"Envia els treballs d'impressió de les impressores que no són Bambu a través dels agents de connector d'impressora en lloc del flux clàssic de pujada a l'amfitrió d'impressió.\n"
+"Quan està desactivat, OrcaSlicer utilitza el comportament antic de l'amfitrió d'impressió."
+
 msgid "Allow Abnormal Storage"
 msgstr "Permet emmagatzematge anormal"
 
@@ -11263,6 +11281,12 @@ msgstr "Cancel·lar el timelapse i imprimir"
 msgid "Clean Up"
 msgstr "Netejar"
 
+msgid "AMS filament mapping is not available for this printer. Clear the AMS mapping before printing."
+msgstr ""
+
+msgid "A filament used by this print has no AMS mapping. Assign it before printing."
+msgstr ""
+
 msgid "Preparing print job"
 msgstr "Preparant el treball d'impressió"
 
@@ -16564,6 +16588,12 @@ msgstr "Farciment simètric eix Y"
 msgid "If the model has two parts that are symmetric about the Y axis, and you want these parts to have symmetric textures, please click this option on one of the parts."
 msgstr "Si el model té dues parts simètriques respecte a l'eix Y i voleu que aquestes parts tinguin textures simètriques, feu clic en aquesta opció en una de les parts."
 
+msgid "Fill pattern tops"
+msgstr ""
+
+msgid "Choose this option if you want to completely fill in the tops of the infill pattern"
+msgstr ""
+
 msgid "Infill combination - Max layer height"
 msgstr "Combinació de farciment: alçada màxima de la capa"
 
@@ -30507,6 +30537,9 @@ msgstr "Activar les eines de desenvolupament"
 msgid "An error occurred loading %s"
 msgstr "S'ha produït un error en carregar %s"
 
+msgid "/"
+msgstr "/"
+
 # AI Translated
 #, boost-format
 msgid "Load %1% to %2%"
@@ -32210,9 +32243,6 @@ msgstr ""
 #~ msgid "An error occurred loading "
 #~ msgstr "S'ha produït un error en carregar "
 
-#~ msgid "/"
-#~ msgstr "/"
-
 # AI Translated
 #, c-format, boost-format
 #~ msgid "Load %s to "
@@ -32418,6 +32448,10 @@ msgstr ""
 #~ msgid "Support/Color Painting: adjust section position"
 #~ msgstr "Suport/Pintat de color: configuració de la posició de la secció"
 
+# AI Translated
+#~ msgid "(Experimental) Use printer agents instead of print hosts"
+#~ msgstr "(Experimental) Utilitza agents d'impressora en lloc d'amfitrions d'impressió"
+
 # AI Translated
 #~ msgid "Tab"
 #~ msgstr "Pestanya"

localization/i18n/cs/OrcaSlicer_cs.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-10-05 10:49-0300\n"
+"POT-Creation-Date: 2026-10-06 13:42+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: Jakub Hencl\n"
 "Language-Team: \n"
@@ -4384,6 +4384,9 @@ msgstr "Opravdu chcete vymazat informace o filamentu?"
 msgid "You need to select the material type and color first."
 msgstr "Nejprve musíte vybrat typ materiálu a barvu."
 
+msgid "The minimum temperature cannot be greater than the maximum temperature."
+msgstr ""
+
 #, c-format, boost-format
 msgid "Please input a valid value (K in %.1f~%.1f)"
 msgstr "Zadejte platnou hodnotu (K v rozsahu %.1f~%.1f)"
@@ -6269,7 +6272,7 @@ msgid "Size:"
 msgstr "Velikost:"
 
 # AI Translated
-#, c-format, boost-format
+#, boost-format
 msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)."
 msgstr "Byly nalezeny konflikty drah G-code ve vrstvě %d, Z = %.2lf mm. Oddělte prosím konfliktní objekty více od sebe (%s <-> %s)."
 
@@ -7159,6 +7162,22 @@ msgstr "Soubor .gcode.3mf neobsahuje žádná G-code data. Prosím, rozřežte m
 msgid "File '%s' was lost! Please download it again."
 msgstr "Soubor '%s' byl ztracen! Stáhněte jej prosím znovu."
 
+msgid "gcodes"
+msgstr ""
+
+msgid "Failed to delete the file from printer."
+msgstr ""
+
+#, c-format, boost-format
+msgid "Do you want to print the file '%s' from printer?"
+msgstr ""
+
+msgid "Print file"
+msgstr ""
+
+msgid "Failed to start the print job."
+msgstr ""
+
 #, c-format, boost-format
 msgid ""
 "File: %s\n"
@@ -10382,18 +10401,6 @@ msgstr "Zobrazit nepodporované předvolby"
 msgid "Show incompatible/unsupported presets in the printer and filament dropdown lists. These presets cannot be selected."
 msgstr "Zobrazovat nekompatibilní/nepodporované předvolby v rozevíracích seznamech tiskáren a filamentů. Tyto předvolby nelze vybrat."
 
-# AI Translated
-msgid "(Experimental) Use printer agents instead of print hosts"
-msgstr "(Experimentální) Používat agenty tiskárny místo tiskových hostů"
-
-# AI Translated
-msgid ""
-"Route print jobs for non-Bambu printers through printer plug-in agents instead of the classic print-host upload flow.\n"
-"When disabled, OrcaSlicer uses the legacy print-host behavior."
-msgstr ""
-"Směruje tiskové úlohy pro tiskárny jiné než Bambu přes agenty pluginů tiskárny místo klasického nahrávání na tiskový host.\n"
-"Pokud je vypnuto, OrcaSlicer používá původní chování tiskového hosta."
-
 # AI Translated
 msgid "Experimental Features"
 msgstr "Experimentální funkce"
@@ -10410,6 +10417,17 @@ msgstr ""
 "Pokusí se zachovat malované prvky (barva/šev/podpory/fuzzy atd.) po změně sítě objektu (například řez / znovunačtení z disku / zjednodušení / oprava atd.)\n"
 "Vysoce experimentální! Pomalé a může vytvářet artefakty."
 
+msgid "Use printer agents instead of print hosts"
+msgstr ""
+
+# AI Translated
+msgid ""
+"Route print jobs for non-Bambu printers through printer plug-in agents instead of the classic print-host upload flow.\n"
+"When disabled, OrcaSlicer uses the legacy print-host behavior."
+msgstr ""
+"Směruje tiskové úlohy pro tiskárny jiné než Bambu přes agenty pluginů tiskárny místo klasického nahrávání na tiskový host.\n"
+"Pokud je vypnuto, OrcaSlicer používá původní chování tiskového hosta."
+
 msgid "Allow Abnormal Storage"
 msgstr "Povolit neobvyklé úložiště"
 
@@ -11227,6 +11245,12 @@ msgstr "Zrušit časosběr a tisknout"
 msgid "Clean Up"
 msgstr "Vyčistit"
 
+msgid "AMS filament mapping is not available for this printer. Clear the AMS mapping before printing."
+msgstr ""
+
+msgid "A filament used by this print has no AMS mapping. Assign it before printing."
+msgstr ""
+
 msgid "Preparing print job"
 msgstr "Příprava tiskové úlohy"
 
@@ -16534,6 +16558,12 @@ msgstr "Symetrická výplň podle osy Y"
 msgid "If the model has two parts that are symmetric about the Y axis, and you want these parts to have symmetric textures, please click this option on one of the parts."
 msgstr "Pokud má model dvě části symetrické podle osy Y a chcete, aby měly symetrické textury, klikněte na tuto možnost u jedné z těchto částí."
 
+msgid "Fill pattern tops"
+msgstr ""
+
+msgid "Choose this option if you want to completely fill in the tops of the infill pattern"
+msgstr ""
+
 msgid "Infill combination - Max layer height"
 msgstr "Kombinace výplně – maximální výška vrstvy"
 
@@ -30517,6 +30547,10 @@ msgstr "Povolit vývojářské nástroje"
 msgid "An error occurred loading %s"
 msgstr "Při načítání %s došlo k chybě"
 
+# AI Translated
+msgid "/"
+msgstr "/"
+
 # AI Translated
 #, boost-format
 msgid "Load %1% to %2%"
@@ -32226,10 +32260,6 @@ msgstr ""
 #~ msgid "An error occurred loading "
 #~ msgstr "Při načítání došlo k chybě: "
 
-# AI Translated
-#~ msgid "/"
-#~ msgstr "/"
-
 # AI Translated
 #, c-format, boost-format
 #~ msgid "Load %s to "
@@ -32436,6 +32466,10 @@ msgstr ""
 #~ msgid "Support/Color Painting: adjust section position"
 #~ msgstr "Podpora/barva malování: nastavení pozice úseku"
 
+# AI Translated
+#~ msgid "(Experimental) Use printer agents instead of print hosts"
+#~ msgstr "(Experimentální) Používat agenty tiskárny místo tiskových hostů"
+
 # AI Translated
 #~ msgid "Tab"
 #~ msgstr "Tab"

localization/i18n/de/OrcaSlicer_de.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-10-05 10:49-0300\n"
+"POT-Creation-Date: 2026-10-06 13:42+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: Heiko Liebscher <hliebschergmail.com>\n"
 "Language-Team: \n"
@@ -4297,6 +4297,9 @@ msgstr "Sind Sie sicher, dass Sie die Filamentinformationen löschen möchten?"
 msgid "You need to select the material type and color first."
 msgstr "Sie müssen zuerst den Materialtyp und die Farbe auswählen."
 
+msgid "The minimum temperature cannot be greater than the maximum temperature."
+msgstr ""
+
 #, c-format, boost-format
 msgid "Please input a valid value (K in %.1f~%.1f)"
 msgstr "Bitte geben Sie einen gültigen Wert ein (K in %.1f~%.1f)"
@@ -6159,7 +6162,7 @@ msgstr "Volumen:"
 msgid "Size:"
 msgstr "Größe:"
 
-#, c-format, boost-format
+#, boost-format
 msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)."
 msgstr "Konflikte von G-Code-Pfaden wurden bei Layer %d, Z = %.2lf mm gefunden.Bitte trennen Sie die konfliktbehafteten Objekte weiter voneinander (%s <-> %s)."
 
@@ -7027,6 +7030,22 @@ msgstr "Die .gcode.3mf-Datei enthält keine G-Code-Daten. Bitte slicen Sie sie m
 msgid "File '%s' was lost! Please download it again."
 msgstr "Die Datei '%s' ist verloren gegangen! Bitte laden Sie diese erneut herunter."
 
+msgid "gcodes"
+msgstr ""
+
+msgid "Failed to delete the file from printer."
+msgstr ""
+
+#, c-format, boost-format
+msgid "Do you want to print the file '%s' from printer?"
+msgstr ""
+
+msgid "Print file"
+msgstr ""
+
+msgid "Failed to start the print job."
+msgstr ""
+
 #, c-format, boost-format
 msgid ""
 "File: %s\n"
@@ -10211,18 +10230,6 @@ msgstr "Nicht unterstützte Profile anzeigen"
 msgid "Show incompatible/unsupported presets in the printer and filament dropdown lists. These presets cannot be selected."
 msgstr "Zeigt inkompatible/nicht unterstützte Profile in den Dropdown-Listen für Drucker und Filament an. Diese Profile können nicht ausgewählt werden."
 
-# AI Translated
-msgid "(Experimental) Use printer agents instead of print hosts"
-msgstr "(Experimentell) Drucker-Agenten anstelle von Druck-Hosts verwenden"
-
-# AI Translated
-msgid ""
-"Route print jobs for non-Bambu printers through printer plug-in agents instead of the classic print-host upload flow.\n"
-"When disabled, OrcaSlicer uses the legacy print-host behavior."
-msgstr ""
-"Leitet Druckaufträge für Nicht-Bambu-Drucker über Drucker-Plugin-Agenten statt über den klassischen Druck-Host-Upload.\n"
-"Wenn deaktiviert, verwendet OrcaSlicer das bisherige Druck-Host-Verhalten."
-
 msgid "Experimental Features"
 msgstr "Experimentelle Funktionen"
 
@@ -10236,6 +10243,17 @@ msgstr ""
 "Versuchen Sie, bemalte Funktionen (Farbe/Naht/Stütze/unscharf usw.) nach Änderung des Objekt-Meshs (z. B. schneiden/neu laden von der Festplatte/vereinfachen/reparieren usw.) beizubehalten\n"
 "Sehr experimentell! Langsam und kann Artefakte erzeugen."
 
+msgid "Use printer agents instead of print hosts"
+msgstr ""
+
+# AI Translated
+msgid ""
+"Route print jobs for non-Bambu printers through printer plug-in agents instead of the classic print-host upload flow.\n"
+"When disabled, OrcaSlicer uses the legacy print-host behavior."
+msgstr ""
+"Leitet Druckaufträge für Nicht-Bambu-Drucker über Drucker-Plugin-Agenten statt über den klassischen Druck-Host-Upload.\n"
+"Wenn deaktiviert, verwendet OrcaSlicer das bisherige Druck-Host-Verhalten."
+
 msgid "Allow Abnormal Storage"
 msgstr "Fehlerhaften Speicher zulassen"
 
@@ -11046,6 +11064,12 @@ msgstr "Zeitraffer abbrechen & Drucken"
 msgid "Clean Up"
 msgstr "Bereinigen"
 
+msgid "AMS filament mapping is not available for this printer. Clear the AMS mapping before printing."
+msgstr ""
+
+msgid "A filament used by this print has no AMS mapping. Assign it before printing."
+msgstr ""
+
 msgid "Preparing print job"
 msgstr "Druckauftrag vorbereiten"
 
@@ -16211,6 +16235,12 @@ msgstr "Symmetrische Füllung Y-Achse"
 msgid "If the model has two parts that are symmetric about the Y axis, and you want these parts to have symmetric textures, please click this option on one of the parts."
 msgstr "Wenn das Modell zwei Teile hat, die symmetrisch zur Y-Achse sind, und Sie möchten, dass diese Teile symmetrische Texturen haben, klicken Sie bitte auf diese Option auf einem der Teile."
 
+msgid "Fill pattern tops"
+msgstr ""
+
+msgid "Choose this option if you want to completely fill in the tops of the infill pattern"
+msgstr ""
+
 msgid "Infill combination - Max layer height"
 msgstr "Kombinieren der Füllung - Maximale Schichthöhe"
 
@@ -29903,6 +29933,9 @@ msgstr "Entwicklertools aktivieren"
 msgid "An error occurred loading %s"
 msgstr "Fehler beim Laden von %s"
 
+msgid "/"
+msgstr "/"
+
 # AI Translated
 #, boost-format
 msgid "Load %1% to %2%"
@@ -31604,9 +31637,6 @@ msgstr ""
 #~ msgid "An error occurred loading "
 #~ msgstr "Fehler beim Laden von "
 
-#~ msgid "/"
-#~ msgstr "/"
-
 # AI Translated
 #, c-format, boost-format
 #~ msgid "Load %s to "
@@ -31812,6 +31842,10 @@ msgstr ""
 #~ msgid "Support/Color Painting: adjust section position"
 #~ msgstr "Stützen/Farbmalen: Position des Abschnitts anpassen"
 
+# AI Translated
+#~ msgid "(Experimental) Use printer agents instead of print hosts"
+#~ msgstr "(Experimentell) Drucker-Agenten anstelle von Druck-Hosts verwenden"
+
 # AI Translated
 #~ msgid "Tab"
 #~ msgstr "Tab"

localization/i18n/en/OrcaSlicer_en.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-10-05 10:49-0300\n"
+"POT-Creation-Date: 2026-10-06 13:42+0800\n"
 "PO-Revision-Date: 2026-06-17 15:44-0300\n"
 "Last-Translator: Alexandre Folle de Menezes\n"
 "Language-Team: \n"
@@ -4042,6 +4042,9 @@ msgstr ""
 msgid "You need to select the material type and color first."
 msgstr ""
 
+msgid "The minimum temperature cannot be greater than the maximum temperature."
+msgstr ""
+
 #, c-format, boost-format
 msgid "Please input a valid value (K in %.1f~%.1f)"
 msgstr ""
@@ -5778,7 +5781,7 @@ msgstr ""
 msgid "Size:"
 msgstr ""
 
-#, c-format, boost-format
+#, boost-format
 msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)."
 msgstr ""
 
@@ -6617,6 +6620,22 @@ msgstr ""
 msgid "File '%s' was lost! Please download it again."
 msgstr ""
 
+msgid "gcodes"
+msgstr ""
+
+msgid "Failed to delete the file from printer."
+msgstr ""
+
+#, c-format, boost-format
+msgid "Do you want to print the file '%s' from printer?"
+msgstr ""
+
+msgid "Print file"
+msgstr ""
+
+msgid "Failed to start the print job."
+msgstr ""
+
 #, c-format, boost-format
 msgid ""
 "File: %s\n"
@@ -9460,14 +9479,6 @@ msgstr ""
 msgid "Show incompatible/unsupported presets in the printer and filament dropdown lists. These presets cannot be selected."
 msgstr ""
 
-msgid "(Experimental) Use printer agents instead of print hosts"
-msgstr ""
-
-msgid ""
-"Route print jobs for non-Bambu printers through printer plug-in agents instead of the classic print-host upload flow.\n"
-"When disabled, OrcaSlicer uses the legacy print-host behavior."
-msgstr ""
-
 msgid "Experimental Features"
 msgstr ""
 
@@ -9479,6 +9490,14 @@ msgid ""
 "Highly experimental! Slow and may create artifact."
 msgstr ""
 
+msgid "Use printer agents instead of print hosts"
+msgstr ""
+
+msgid ""
+"Route print jobs for non-Bambu printers through printer plug-in agents instead of the classic print-host upload flow.\n"
+"When disabled, OrcaSlicer uses the legacy print-host behavior."
+msgstr ""
+
 msgid "Allow Abnormal Storage"
 msgstr ""
 
@@ -10184,6 +10203,12 @@ msgstr ""
 msgid "Clean Up"
 msgstr ""
 
+msgid "AMS filament mapping is not available for this printer. Clear the AMS mapping before printing."
+msgstr ""
+
+msgid "A filament used by this print has no AMS mapping. Assign it before printing."
+msgstr ""
+
 msgid "Preparing print job"
 msgstr ""
 
@@ -14775,6 +14800,12 @@ msgstr ""
 msgid "If the model has two parts that are symmetric about the Y axis, and you want these parts to have symmetric textures, please click this option on one of the parts."
 msgstr ""
 
+msgid "Fill pattern tops"
+msgstr ""
+
+msgid "Choose this option if you want to completely fill in the tops of the infill pattern"
+msgstr ""
+
 msgid "Infill combination - Max layer height"
 msgstr ""
 
@@ -26296,6 +26327,9 @@ msgstr ""
 msgid "An error occurred loading %s"
 msgstr ""
 
+msgid "/"
+msgstr ""
+
 #, boost-format
 msgid "Load %1% to %2%"
 msgstr ""

localization/i18n/es/OrcaSlicer_es.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-10-05 10:49-0300\n"
+"POT-Creation-Date: 2026-10-06 13:42+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: Ian A. Bassi <>\n"
 "Language-Team: \n"
@@ -4175,6 +4175,9 @@ msgstr "¿Estás seguro que quieres limpiar la información de filamento?"
 msgid "You need to select the material type and color first."
 msgstr "Necesitas seleccionar el tipo y el color del material primero."
 
+msgid "The minimum temperature cannot be greater than the maximum temperature."
+msgstr ""
+
 #, c-format, boost-format
 msgid "Please input a valid value (K in %.1f~%.1f)"
 msgstr "Por favor, introduzca un valor válido (K in %.1f~%.1f)"
@@ -6012,7 +6015,7 @@ msgstr "Volumen:"
 msgid "Size:"
 msgstr "Tamaño:"
 
-#, c-format, boost-format
+#, boost-format
 msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)."
 msgstr "Se han encontrado conflictos de rutas G-Code en la capa %d, Z = %.2lfmm. Por favor, separe más los objetos en conflicto (%s <-> %s)."
 
@@ -6879,6 +6882,22 @@ msgstr "El archivo .gcode .3mf no contiene datos de G-Code. Por favor, lamine co
 msgid "File '%s' was lost! Please download it again."
 msgstr "¡El archivo '%s' se perdió!\" Por favor, vuelva a descargárlo."
 
+msgid "gcodes"
+msgstr ""
+
+msgid "Failed to delete the file from printer."
+msgstr ""
+
+#, c-format, boost-format
+msgid "Do you want to print the file '%s' from printer?"
+msgstr ""
+
+msgid "Print file"
+msgstr ""
+
+msgid "Failed to start the print job."
+msgstr ""
+
 #, c-format, boost-format
 msgid ""
 "File: %s\n"
@@ -9972,18 +9991,6 @@ msgstr "Mostrar ajustes preestablecidos no compatibles"
 msgid "Show incompatible/unsupported presets in the printer and filament dropdown lists. These presets cannot be selected."
 msgstr "Mostrar los ajustes preestablecidos incompatibles o no compatibles en los menús desplegables de impresoras y filamentos. Estos ajustes preestablecidos no se pueden seleccionar."
 
-# AI Translated
-msgid "(Experimental) Use printer agents instead of print hosts"
-msgstr "(Experimental) Usar agentes de impresora en lugar de hosts de impresión"
-
-# AI Translated
-msgid ""
-"Route print jobs for non-Bambu printers through printer plug-in agents instead of the classic print-host upload flow.\n"
-"When disabled, OrcaSlicer uses the legacy print-host behavior."
-msgstr ""
-"Envía los trabajos de impresión de impresoras que no son Bambu a través de los agentes de plugin de impresora en lugar del flujo clásico de subida al host de impresión.\n"
-"Cuando está desactivado, OrcaSlicer utiliza el comportamiento heredado del host de impresión."
-
 msgid "Experimental Features"
 msgstr "Funciones experimentales"
 
@@ -9997,6 +10004,17 @@ msgstr ""
 "Intenta conservar las característica pintadas (color, costuras, soportes, piel rugosa, etc.) tras modificar la malla del objeto (por ejemplo, al cortar, volver a cargar desde el disco, simplificar, corregir, etc.).\n"
 "¡Muy experimental! Es lento y puede generar artefactos."
 
+msgid "Use printer agents instead of print hosts"
+msgstr ""
+
+# AI Translated
+msgid ""
+"Route print jobs for non-Bambu printers through printer plug-in agents instead of the classic print-host upload flow.\n"
+"When disabled, OrcaSlicer uses the legacy print-host behavior."
+msgstr ""
+"Envía los trabajos de impresión de impresoras que no son Bambu a través de los agentes de plugin de impresora en lugar del flujo clásico de subida al host de impresión.\n"
+"Cuando está desactivado, OrcaSlicer utiliza el comportamiento heredado del host de impresión."
+
 msgid "Allow Abnormal Storage"
 msgstr "Permitir almacenamiento anómalo"
 
@@ -10778,6 +10796,12 @@ msgstr "Cancelar timelapse e imprimir"
 msgid "Clean Up"
 msgstr "Limpiar"
 
+msgid "AMS filament mapping is not available for this printer. Clear the AMS mapping before printing."
+msgstr ""
+
+msgid "A filament used by this print has no AMS mapping. Assign it before printing."
+msgstr ""
+
 msgid "Preparing print job"
 msgstr "Preparando el trabajo de impresión"
 
@@ -15863,6 +15887,12 @@ msgstr "Relleno simétrico respecto al eje Y"
 msgid "If the model has two parts that are symmetric about the Y axis, and you want these parts to have symmetric textures, please click this option on one of the parts."
 msgstr "Si el modelo tiene dos piezas simétricas respecto al eje Y y desea que tengan texturas simétricas, active esta opción en una de las piezas."
 
+msgid "Fill pattern tops"
+msgstr ""
+
+msgid "Choose this option if you want to completely fill in the tops of the infill pattern"
+msgstr ""
+
 msgid "Infill combination - Max layer height"
 msgstr "Combinación de relleno - Altura máxima de la capa"
 
@@ -29459,6 +29489,9 @@ msgstr "Activar herramientas de desarrollo"
 msgid "An error occurred loading %s"
 msgstr "Se produjo un error al cargar %s"
 
+msgid "/"
+msgstr "/"
+
 # AI Translated
 #, boost-format
 msgid "Load %1% to %2%"
@@ -30138,6 +30171,10 @@ msgstr ""
 "Evita la deformación\n"
 "¿Sabías que al imprimir materiales propensos a la deformación como el ABS, aumentar adecuadamente la temperatura de la cama térmica puede reducir la probabilidad de deformaciones?"
 
+# AI Translated
+#~ msgid "(Experimental) Use printer agents instead of print hosts"
+#~ msgstr "(Experimental) Usar agentes de impresora en lugar de hosts de impresión"
+
 #~ msgid "X"
 #~ msgstr "X"
 
@@ -31160,9 +31197,6 @@ msgstr ""
 #~ msgid "An error occurred loading "
 #~ msgstr "Se produjo un error al cargar "
 
-#~ msgid "/"
-#~ msgstr "/"
-
 # AI Translated
 #, c-format, boost-format
 #~ msgid "Load %s to "

localization/i18n/eu/OrcaSlicer_eu.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-10-05 10:49-0300\n"
+"POT-Creation-Date: 2026-10-06 13:42+0800\n"
 "PO-Revision-Date: 2026-07-20 13:33+0200\n"
 "Last-Translator: Manu Goiogana <mgoiogana@gmail.com>\n"
 "Language-Team: \n"
@@ -4218,6 +4218,9 @@ msgstr "Ziur zaude filamentuaren informazioa garbitu nahi duzula?"
 msgid "You need to select the material type and color first."
 msgstr "Lehenik eta behin, material-mota eta kolorea hautatu behar dituzu."
 
+msgid "The minimum temperature cannot be greater than the maximum temperature."
+msgstr ""
+
 #, c-format, boost-format
 msgid "Please input a valid value (K in %.1f~%.1f)"
 msgstr "Mesedez, sartu baliozko balio bat (K in %.1f~%.1f)"
@@ -6066,7 +6069,7 @@ msgstr "Bolumena:"
 msgid "Size:"
 msgstr "Tamaina:"
 
-#, c-format, boost-format
+#, boost-format
 msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)."
 msgstr "G-code ibilbideen gatazkak aurkitu dira %d geruzan, Z = %.2lf mm. Urrundu gehiago gatazkan dauden objektuak (%s <-> %s)."
 
@@ -6930,6 +6933,22 @@ msgstr ".gcode.3mf fitxategiak ez du G-code daturik. Mesedez, xerratu OrcaSlicer
 msgid "File '%s' was lost! Please download it again."
 msgstr "'%s' fitxategia galdu da! Deskargatu berriro."
 
+msgid "gcodes"
+msgstr ""
+
+msgid "Failed to delete the file from printer."
+msgstr ""
+
+#, c-format, boost-format
+msgid "Do you want to print the file '%s' from printer?"
+msgstr ""
+
+msgid "Print file"
+msgstr ""
+
+msgid "Failed to start the print job."
+msgstr ""
+
 #, c-format, boost-format
 msgid ""
 "File: %s\n"
@@ -10061,18 +10080,6 @@ msgstr "Erakutsi onartzen ez diren aurrezarpenak"
 msgid "Show incompatible/unsupported presets in the printer and filament dropdown lists. These presets cannot be selected."
 msgstr "Erakutsi bateraezinak edo onartu gabeak diren aurrezarpenak inprimagailuaren eta filamentuaren goitibeherako zerrendetan. Aurrezarpen hauek ezin dira hautatu."
 
-# AI Translated
-msgid "(Experimental) Use printer agents instead of print hosts"
-msgstr "(Esperimentala) Erabili inprimagailu-agenteak inprimatze-hostenen ordez"
-
-# AI Translated
-msgid ""
-"Route print jobs for non-Bambu printers through printer plug-in agents instead of the classic print-host upload flow.\n"
-"When disabled, OrcaSlicer uses the legacy print-host behavior."
-msgstr ""
-"Bideratu Bambu ez diren inprimagailuen inprimatze-lanak inprimagailuaren plugin-agenteen bidez, inprimatze-hostera igotzeko fluxu klasikoaren ordez.\n"
-"Desgaituta dagoenean, OrcaSlicer-ek inprimatze-hostaren aurreko portaera erabiltzen du."
-
 msgid "Experimental Features"
 msgstr "Ezaugarri esperimentalak"
 
@@ -10086,6 +10093,17 @@ msgstr ""
 "Saiatu pintatutako eginbideak (kolorea/jostura/euskarria/gainazal zimurra eta abar) mantentzen objektuaren sarea aldatu ondoren (adibidez, ebaki/diskotik birkargatu/sinplifikatu/konpondu eta abar).\n"
 "Oso esperimentala! Motela da eta artefaktuak sor ditzake."
 
+msgid "Use printer agents instead of print hosts"
+msgstr ""
+
+# AI Translated
+msgid ""
+"Route print jobs for non-Bambu printers through printer plug-in agents instead of the classic print-host upload flow.\n"
+"When disabled, OrcaSlicer uses the legacy print-host behavior."
+msgstr ""
+"Bideratu Bambu ez diren inprimagailuen inprimatze-lanak inprimagailuaren plugin-agenteen bidez, inprimatze-hostera igotzeko fluxu klasikoaren ordez.\n"
+"Desgaituta dagoenean, OrcaSlicer-ek inprimatze-hostaren aurreko portaera erabiltzen du."
+
 msgid "Allow Abnormal Storage"
 msgstr "Baimendu biltegiratze anormala"
 
@@ -10884,6 +10902,12 @@ msgstr "Utzi timelapsea eta inprimatu"
 msgid "Clean Up"
 msgstr "Garbitu"
 
+msgid "AMS filament mapping is not available for this printer. Clear the AMS mapping before printing."
+msgstr ""
+
+msgid "A filament used by this print has no AMS mapping. Assign it before printing."
+msgstr ""
+
 msgid "Preparing print job"
 msgstr "Inprimatze-lana prestatzen"
 
@@ -16022,6 +16046,12 @@ msgstr "Betegarri simetrikoaren Y ardatza"
 msgid "If the model has two parts that are symmetric about the Y axis, and you want these parts to have symmetric textures, please click this option on one of the parts."
 msgstr "Modeloak Y ardatzarekiko simetrikoak diren bi zati baditu eta zati horiek testura simetrikoak izatea nahi baduzu, aktibatu aukera hau zatietako batean."
 
+msgid "Fill pattern tops"
+msgstr ""
+
+msgid "Choose this option if you want to completely fill in the tops of the infill pattern"
+msgstr ""
+
 msgid "Infill combination - Max layer height"
 msgstr "Betegarri-konbinazioa - Gehieneko geruza-altuera"
 
@@ -29650,6 +29680,9 @@ msgstr "Gaitu garapen-tresnak"
 msgid "An error occurred loading %s"
 msgstr "Errore bat gertatu da %s kargatzean"
 
+msgid "/"
+msgstr "/"
+
 # AI Translated
 #, boost-format
 msgid "Load %1% to %2%"
@@ -30329,6 +30362,10 @@ msgstr ""
 "Saihestu okertzea\n"
 "Ba al zenekien ABS bezalako okertzeko joera duten materialak inprimatzean ohe beroaren tenperatura egoki igotzeak okertzeko probabilitatea murriztu dezakeela?"
 
+# AI Translated
+#~ msgid "(Experimental) Use printer agents instead of print hosts"
+#~ msgstr "(Esperimentala) Erabili inprimagailu-agenteak inprimatze-hostenen ordez"
+
 #~ msgid "X"
 #~ msgstr "X"
 
@@ -31355,9 +31392,6 @@ msgstr ""
 #~ msgid "An error occurred loading "
 #~ msgstr "Errore bat gertatu da hau kargatzean: "
 
-#~ msgid "/"
-#~ msgstr "/"
-
 # AI Translated
 #, c-format, boost-format
 #~ msgid "Load %s to "

localization/i18n/fr/OrcaSlicer_fr.po

@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-10-05 10:49-0300\n"
+"POT-Creation-Date: 2026-10-06 13:42+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: Guislain Cyril, Thomas Lété\n"
@@ -4247,6 +4247,9 @@ msgstr "Voulez-vous vraiment effacer les informations du filament ?"
 msgid "You need to select the material type and color first."
 msgstr "Vous devez d'abord sélectionner le type de matériau et sa couleur."
 
+msgid "The minimum temperature cannot be greater than the maximum temperature."
+msgstr ""
+
 #, c-format, boost-format
 msgid "Please input a valid value (K in %.1f~%.1f)"
 msgstr "Veuillez saisir une valeur valide (K entre %.1f~%.1f)"
@@ -6101,7 +6104,7 @@ msgstr "Volume :"
 msgid "Size:"
 msgstr "Taille :"
 
-#, c-format, boost-format
+#, boost-format
 msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)."
 msgstr "Des conflits de chemins G-code ont été trouvés au niveau de la couche %d, z = %.2lfmm. Veuillez séparer davantage les objets en conflit (%s <-> %s)."
 
@@ -6969,6 +6972,22 @@ msgstr "Le fichier G-code .3mf ne contient pas de données G-code. Veuillez le d
 msgid "File '%s' was lost! Please download it again."
 msgstr "Le fichier « %s » a été perdu ! Veuillez le télécharger à nouveau."
 
+msgid "gcodes"
+msgstr ""
+
+msgid "Failed to delete the file from printer."
+msgstr ""
+
+#, c-format, boost-format
+msgid "Do you want to print the file '%s' from printer?"
+msgstr ""
+
+msgid "Print file"
+msgstr ""
+
+msgid "Failed to start the print job."
+msgstr ""
+
 #, c-format, boost-format
 msgid ""
 "File: %s\n"
@@ -10081,18 +10100,6 @@ msgstr "Afficher les préréglages non pris en charge"
 msgid "Show incompatible/unsupported presets in the printer and filament dropdown lists. These presets cannot be selected."
 msgstr "Affiche les préréglages incompatibles ou non pris en charge dans les listes déroulantes d’imprimantes et de filaments. Ces préréglages ne peuvent pas être sélectionnés."
 
-# AI Translated
-msgid "(Experimental) Use printer agents instead of print hosts"
-msgstr "(Expérimental) Utiliser les agents d’imprimante au lieu des hôtes d’impression"
-
-# AI Translated
-msgid ""
-"Route print jobs for non-Bambu printers through printer plug-in agents instead of the classic print-host upload flow.\n"
-"When disabled, OrcaSlicer uses the legacy print-host behavior."
-msgstr ""
-"Achemine les tâches d’impression des imprimantes non Bambu via les agents de plugin d’imprimante au lieu du flux classique d’envoi vers l’hôte d’impression.\n"
-"Lorsque cette option est désactivée, OrcaSlicer utilise l’ancien comportement de l’hôte d’impression."
-
 msgid "Experimental Features"
 msgstr "Fonctionnalités expérimentales"
 
@@ -10106,6 +10113,17 @@ msgstr ""
 "Tente de conserver les éléments peints (couleur/couture/support/surface irrégulière, etc.) après une modification du maillage de l’objet (découpe/rechargement depuis le disque/simplification/réparation, etc.)\n"
 "Hautement expérimental ! Lent et susceptible de créer des artefacts."
 
+msgid "Use printer agents instead of print hosts"
+msgstr ""
+
+# AI Translated
+msgid ""
+"Route print jobs for non-Bambu printers through printer plug-in agents instead of the classic print-host upload flow.\n"
+"When disabled, OrcaSlicer uses the legacy print-host behavior."
+msgstr ""
+"Achemine les tâches d’impression des imprimantes non Bambu via les agents de plugin d’imprimante au lieu du flux classique d’envoi vers l’hôte d’impression.\n"
+"Lorsque cette option est désactivée, OrcaSlicer utilise l’ancien comportement de l’hôte d’impression."
+
 msgid "Allow Abnormal Storage"
 msgstr "Autoriser le stockage anormal"
 
@@ -10900,6 +10918,12 @@ msgstr "Annuler le timelapse et imprimer"
 msgid "Clean Up"
 msgstr "Nettoyer"
 
+msgid "AMS filament mapping is not available for this printer. Clear the AMS mapping before printing."
+msgstr ""
+
+msgid "A filament used by this print has no AMS mapping. Assign it before printing."
+msgstr ""
+
 msgid "Preparing print job"
 msgstr "Préparation du travail d'impression"
 
@@ -16045,6 +16069,12 @@ msgstr "Axe Y de remplissage symétrique"
 msgid "If the model has two parts that are symmetric about the Y axis, and you want these parts to have symmetric textures, please click this option on one of the parts."
 msgstr "Si le modèle a deux parties symétriques par rapport à l'axe Y et que vous souhaitez que ces parties aient des textures symétriques, veuillez cliquer sur cette option sur l'une des parties."
 
+msgid "Fill pattern tops"
+msgstr ""
+
+msgid "Choose this option if you want to completely fill in the tops of the infill pattern"
+msgstr ""
+
 msgid "Infill combination - Max layer height"
 msgstr "Combinaison de remplissage - Hauteur maximale de la couche"
 
@@ -29392,6 +29422,9 @@ msgstr "Activer les outils de développement"
 msgid "An error occurred loading %s"
 msgstr "Une erreur s’est produite lors du chargement de %s"
 
+msgid "/"
+msgstr "/"
+
 # AI Translated
 #, boost-format
 msgid "Load %1% to %2%"
@@ -30071,6 +30104,10 @@ msgstr ""
 "Éviter la déformation\n"
 "Saviez-vous que lors de l’impression de matériaux susceptibles de se déformer, tels que l’ABS, une augmentation appropriée de la température du plateau chauffant peut réduire la probabilité de déformation?"
 
+# AI Translated
+#~ msgid "(Experimental) Use printer agents instead of print hosts"
+#~ msgstr "(Expérimental) Utiliser les agents d’imprimante au lieu des hôtes d’impression"
+
 #~ msgid "X"
 #~ msgstr "X"
 
@@ -31090,9 +31127,6 @@ msgstr ""
 #~ msgid "An error occurred loading "
 #~ msgstr "Une erreur s’est produite lors du chargement de "
 
-#~ msgid "/"
-#~ msgstr "/"
-
 # AI Translated
 #, c-format, boost-format
 #~ msgid "Load %s to "

localization/i18n/hu/OrcaSlicer_hu.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-10-05 10:49-0300\n"
+"POT-Creation-Date: 2026-10-06 13:42+0800\n"
 "Language: hu\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -4357,6 +4357,9 @@ msgstr "Biztosan törölni szeretnéd a filament adatait?"
 msgid "You need to select the material type and color first."
 msgstr "Először ki kell választanod az anyagtípust és a színt."
 
+msgid "The minimum temperature cannot be greater than the maximum temperature."
+msgstr ""
+
 #, c-format, boost-format
 msgid "Please input a valid value (K in %.1f~%.1f)"
 msgstr "Adj meg érvényes értéket (K tartomány: %.1f~%.1f)"
@@ -6236,7 +6239,7 @@ msgid "Size:"
 msgstr "Méret:"
 
 # AI Translated
-#, c-format, boost-format
+#, boost-format
 msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)."
 msgstr "G-code útvonalütközés található a(z) %d. rétegen, Z = %.2lfmm. Helyezd távolabb egymástól az ütköző objektumokat (%s <-> %s)."
 
@@ -7122,6 +7125,22 @@ msgstr "A .gcode.3mf fájl nem tartalmaz G-code adatot. Szeleteld újra Orca Sli
 msgid "File '%s' was lost! Please download it again."
 msgstr "A(z) '%s' fájl elveszett! Kérlek, töltsd le újra."
 
+msgid "gcodes"
+msgstr ""
+
+msgid "Failed to delete the file from printer."
+msgstr ""
+
+#, c-format, boost-format
+msgid "Do you want to print the file '%s' from printer?"
+msgstr ""
+
+msgid "Print file"
+msgstr ""
+
+msgid "Failed to start the print job."
+msgstr ""
+
 #, c-format, boost-format
 msgid ""
 "File: %s\n"
@@ -10332,18 +10351,6 @@ msgstr "Nem támogatott beállítások megjelenítése"
 msgid "Show incompatible/unsupported presets in the printer and filament dropdown lists. These presets cannot be selected."
 msgstr "Megjeleníti a nem kompatibilis vagy nem támogatott beállításokat a nyomtató- és filamentlegördülő listákban. Ezek a beállítások nem választhatók ki."
 
-# AI Translated
-msgid "(Experimental) Use printer agents instead of print hosts"
-msgstr "(Kísérleti) Nyomtatóügynökök használata nyomtatókiszolgálók helyett"
-
-# AI Translated
-msgid ""
-"Route print jobs for non-Bambu printers through printer plug-in agents instead of the classic print-host upload flow.\n"
-"When disabled, OrcaSlicer uses the legacy print-host behavior."
-msgstr ""
-"A nem Bambu nyomtatók nyomtatási feladatait a nyomtató bővítményügynökein keresztül továbbítja a klasszikus nyomtatókiszolgálóra való feltöltés helyett.\n"
-"Ha ki van kapcsolva, az OrcaSlicer a régi nyomtatókiszolgáló-viselkedést használja."
-
 # AI Translated
 msgid "Experimental Features"
 msgstr "Kísérleti funkciók"
@@ -10359,6 +10366,17 @@ msgstr ""
 "Megpróbálja tartani a festett jellemzőket (szín/varrat/támasz/fuzzy stb.) az objektumháló megváltoztatása után (például kivágás/újratöltés lemezről/egyszerűsítés/javítás stb.)\n"
 "Kísérletei szint! Lassú és hibákat hozhat létre."
 
+msgid "Use printer agents instead of print hosts"
+msgstr ""
+
+# AI Translated
+msgid ""
+"Route print jobs for non-Bambu printers through printer plug-in agents instead of the classic print-host upload flow.\n"
+"When disabled, OrcaSlicer uses the legacy print-host behavior."
+msgstr ""
+"A nem Bambu nyomtatók nyomtatási feladatait a nyomtató bővítményügynökein keresztül továbbítja a klasszikus nyomtatókiszolgálóra való feltöltés helyett.\n"
+"Ha ki van kapcsolva, az OrcaSlicer a régi nyomtatókiszolgáló-viselkedést használja."
+
 msgid "Allow Abnormal Storage"
 msgstr "Rendellenes tároló engedélyezése"
 
@@ -11177,6 +11195,12 @@ msgstr "Timelapse megszakítása és nyomtatás"
 msgid "Clean Up"
 msgstr "Tisztítás"
 
+msgid "AMS filament mapping is not available for this printer. Clear the AMS mapping before printing."
+msgstr ""
+
+msgid "A filament used by this print has no AMS mapping. Assign it before printing."
+msgstr ""
+
 msgid "Preparing print job"
 msgstr "Nyomtatási feladat előkészítése"
 
@@ -16465,6 +16489,12 @@ msgstr "Szimmetrikus kitöltés Y tengely"
 msgid "If the model has two parts that are symmetric about the Y axis, and you want these parts to have symmetric textures, please click this option on one of the parts."
 msgstr "Ha a modell két, az Y tengelyre szimmetrikus részből áll, és azt szeretnéd, hogy ezek a részek szimmetrikus textúrát kapjanak, kattints erre az opcióra az egyik részen."
 
+msgid "Fill pattern tops"
+msgstr ""
+
+msgid "Choose this option if you want to completely fill in the tops of the infill pattern"
+msgstr ""
+
 msgid "Infill combination - Max layer height"
 msgstr "Kitöltés összevonása - maximális rétegmagasság"
 
@@ -30380,6 +30410,10 @@ msgstr "Fejlesztői eszközök engedélyezése"
 msgid "An error occurred loading %s"
 msgstr "Hiba történt a(z) %s betöltésekor"
 
+# AI Translated
+msgid "/"
+msgstr "/"
+
 # AI Translated
 #, boost-format
 msgid "Load %1% to %2%"
@@ -32083,10 +32117,6 @@ msgstr ""
 #~ msgid "An error occurred loading "
 #~ msgstr "Hiba történt a betöltés során: "
 
-# AI Translated
-#~ msgid "/"
-#~ msgstr "/"
-
 # AI Translated
 #, c-format, boost-format
 #~ msgid "Load %s to "
@@ -32293,6 +32323,10 @@ msgstr ""
 #~ msgid "Support/Color Painting: adjust section position"
 #~ msgstr "Támasz/Színfestés: metszet pozíciójának beállítása"
 
+# AI Translated
+#~ msgid "(Experimental) Use printer agents instead of print hosts"
+#~ msgstr "(Kísérleti) Nyomtatóügynökök használata nyomtatókiszolgálók helyett"
+
 # AI Translated
 #~ msgid "Tab"
 #~ msgstr "Tab"

localization/i18n/it/OrcaSlicer_it.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-10-05 10:49-0300\n"
+"POT-Creation-Date: 2026-10-06 13:42+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -4350,6 +4350,9 @@ msgstr "Sei sicuro di voler cancellare le informazioni del filamento?"
 msgid "You need to select the material type and color first."
 msgstr "Devi prima selezionare il tipo e il colore del materiale."
 
+msgid "The minimum temperature cannot be greater than the maximum temperature."
+msgstr ""
+
 #, c-format, boost-format
 msgid "Please input a valid value (K in %.1f~%.1f)"
 msgstr "Si prega di immettere un valore valido (K in %.1f~%.1f)"
@@ -6209,7 +6212,7 @@ msgstr "Volume:"
 msgid "Size:"
 msgstr "Dimensione:"
 
-#, c-format, boost-format
+#, boost-format
 msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)."
 msgstr "Sono stati trovati conflitti di percorsi nel G-code sullo strato %d, Z = %.2lfmm. Si prega di separare gli oggetti in conflitto (%s <-> %s)."
 
@@ -7086,6 +7089,22 @@ msgstr "Il file .gcode.3mf non contiene dati G-code. Elaboralo con OrcaSlicer ed
 msgid "File '%s' was lost! Please download it again."
 msgstr "Il file '%s' è stato perso! Si prega di scaricarlo di nuovo."
 
+msgid "gcodes"
+msgstr ""
+
+msgid "Failed to delete the file from printer."
+msgstr ""
+
+#, c-format, boost-format
+msgid "Do you want to print the file '%s' from printer?"
+msgstr ""
+
+msgid "Print file"
+msgstr ""
+
+msgid "Failed to start the print job."
+msgstr ""
+
 #, c-format, boost-format
 msgid ""
 "File: %s\n"
@@ -10295,18 +10314,6 @@ msgstr "Mostra i profili non supportati"
 msgid "Show incompatible/unsupported presets in the printer and filament dropdown lists. These presets cannot be selected."
 msgstr "Mostra i profili incompatibili/non supportati negli elenchi a discesa di stampante e filamento. Questi profili non possono essere selezionati."
 
-# AI Translated
-msgid "(Experimental) Use printer agents instead of print hosts"
-msgstr "(Sperimentale) Usa gli agenti stampante invece degli host di stampa"
-
-# AI Translated
-msgid ""
-"Route print jobs for non-Bambu printers through printer plug-in agents instead of the classic print-host upload flow.\n"
-"When disabled, OrcaSlicer uses the legacy print-host behavior."
-msgstr ""
-"Instrada i lavori di stampa delle stampanti non Bambu attraverso gli agenti plugin della stampante invece del classico flusso di caricamento sull'host di stampa.\n"
-"Quando è disattivato, OrcaSlicer usa il comportamento legacy dell'host di stampa."
-
 # AI Translated
 msgid "Experimental Features"
 msgstr "Funzionalità sperimentali"
@@ -10323,6 +10330,17 @@ msgstr ""
 "Tenta di mantenere le zone dipinte (colore/cucitura/supporto/ruvida ecc.) dopo la modifica della mesh dell'oggetto (come taglio/ricarica dal disco/semplifica/correggi ecc.)\n"
 "Altamente sperimentale! Lento e può creare artefatti."
 
+msgid "Use printer agents instead of print hosts"
+msgstr ""
+
+# AI Translated
+msgid ""
+"Route print jobs for non-Bambu printers through printer plug-in agents instead of the classic print-host upload flow.\n"
+"When disabled, OrcaSlicer uses the legacy print-host behavior."
+msgstr ""
+"Instrada i lavori di stampa delle stampanti non Bambu attraverso gli agenti plugin della stampante invece del classico flusso di caricamento sull'host di stampa.\n"
+"Quando è disattivato, OrcaSlicer usa il comportamento legacy dell'host di stampa."
+
 msgid "Allow Abnormal Storage"
 msgstr "Consenti memoria anomala"
 
@@ -11136,6 +11154,12 @@ msgstr "Annulla timelapse e stampa"
 msgid "Clean Up"
 msgstr "Pulisci"
 
+msgid "AMS filament mapping is not available for this printer. Clear the AMS mapping before printing."
+msgstr ""
+
+msgid "A filament used by this print has no AMS mapping. Assign it before printing."
+msgstr ""
+
 msgid "Preparing print job"
 msgstr "Preparazione della stampa"
 
@@ -16374,6 +16398,12 @@ msgstr "Riempimento simmetrico asse Y"
 msgid "If the model has two parts that are symmetric about the Y axis, and you want these parts to have symmetric textures, please click this option on one of the parts."
 msgstr "Se il modello ha due parti simmetriche rispetto all'asse Y e si desidera che queste parti abbiano texture simmetriche, fare clic su questa opzione su una delle parti."
 
+msgid "Fill pattern tops"
+msgstr ""
+
+msgid "Choose this option if you want to completely fill in the tops of the infill pattern"
+msgstr ""
+
 msgid "Infill combination - Max layer height"
 msgstr "Combinazione riempimento - Altezza massima strato"
 
@@ -30244,6 +30274,9 @@ msgstr "Abilita strumenti per sviluppatori"
 msgid "An error occurred loading %s"
 msgstr "Si è verificato un errore durante il caricamento di %s"
 
+msgid "/"
+msgstr "/"
+
 # AI Translated
 #, boost-format
 msgid "Load %1% to %2%"
@@ -31947,9 +31980,6 @@ msgstr ""
 #~ msgid "An error occurred loading "
 #~ msgstr "Si è verificato un errore durante il caricamento di "
 
-#~ msgid "/"
-#~ msgstr "/"
-
 # AI Translated
 #, c-format, boost-format
 #~ msgid "Load %s to "
@@ -32155,6 +32185,10 @@ msgstr ""
 #~ msgid "Support/Color Painting: adjust section position"
 #~ msgstr "Supporto/Pittura a colori: regola la posizione della sezione"
 
+# AI Translated
+#~ msgid "(Experimental) Use printer agents instead of print hosts"
+#~ msgstr "(Sperimentale) Usa gli agenti stampante invece degli host di stampa"
+
 # AI Translated
 #~ msgid "Tab"
 #~ msgstr "Tab"

localization/i18n/ja/OrcaSlicer_ja.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-10-05 10:49-0300\n"
+"POT-Creation-Date: 2026-10-06 13:42+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -4352,6 +4352,9 @@ msgstr "フィラメント情報をクリアしてもよろしいですか？"
 msgid "You need to select the material type and color first."
 msgstr "まず材料タイプと色を選択してください。"
 
+msgid "The minimum temperature cannot be greater than the maximum temperature."
+msgstr ""
+
 #, c-format, boost-format
 msgid "Please input a valid value (K in %.1f~%.1f)"
 msgstr "有効な値を入力してください（Kは%.1f～%.1f）"
@@ -6233,7 +6236,7 @@ msgstr "ボリューム"
 msgid "Size:"
 msgstr "サイズ:"
 
-#, c-format, boost-format
+#, boost-format
 msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)."
 msgstr "レイヤー%d、Z = %.2lfmmでG-codeパスの衝突が検出されました。衝突するオブジェクトをもっと離してください（%s <-> %s）。"
 
@@ -7102,6 +7105,22 @@ msgstr ".gcode.3mfファイルにG-codeデータが含まれていません。Or
 msgid "File '%s' was lost! Please download it again."
 msgstr "ファイル %s が見つかりませんでした、もう一度ダウンロードしてください。"
 
+msgid "gcodes"
+msgstr ""
+
+msgid "Failed to delete the file from printer."
+msgstr ""
+
+#, c-format, boost-format
+msgid "Do you want to print the file '%s' from printer?"
+msgstr ""
+
+msgid "Print file"
+msgstr ""
+
+msgid "Failed to start the print job."
+msgstr ""
+
 #, c-format, boost-format
 msgid ""
 "File: %s\n"
@@ -10329,18 +10348,6 @@ msgstr "非対応のプリセットを表示"
 msgid "Show incompatible/unsupported presets in the printer and filament dropdown lists. These presets cannot be selected."
 msgstr "プリンターとフィラメントのドロップダウンリストに、互換性のない/非対応のプリセットを表示します。これらのプリセットは選択できません。"
 
-# AI Translated
-msgid "(Experimental) Use printer agents instead of print hosts"
-msgstr "(実験的) プリントホストの代わりにプリンターエージェントを使用"
-
-# AI Translated
-msgid ""
-"Route print jobs for non-Bambu printers through printer plug-in agents instead of the classic print-host upload flow.\n"
-"When disabled, OrcaSlicer uses the legacy print-host behavior."
-msgstr ""
-"Bambu 以外のプリンターの印刷ジョブを、従来のプリントホストへのアップロードではなく、プリンターのプラグインエージェント経由で送信します。\n"
-"無効の場合、OrcaSlicer は従来のプリントホストの動作を使用します。"
-
 # AI Translated
 msgid "Experimental Features"
 msgstr "実験的機能"
@@ -10357,6 +10364,17 @@ msgstr ""
 "オブジェクトのメッシュを変更した後 (カット/ディスクから再読み込み/簡略化/修正など) も、ペイントした情報 (カラー/継ぎ目/サポート/ファジーなど) の保持を試みます。\n"
 "非常に実験的な機能です。処理が遅く、アーティファクトが発生する場合があります。"
 
+msgid "Use printer agents instead of print hosts"
+msgstr ""
+
+# AI Translated
+msgid ""
+"Route print jobs for non-Bambu printers through printer plug-in agents instead of the classic print-host upload flow.\n"
+"When disabled, OrcaSlicer uses the legacy print-host behavior."
+msgstr ""
+"Bambu 以外のプリンターの印刷ジョブを、従来のプリントホストへのアップロードではなく、プリンターのプラグインエージェント経由で送信します。\n"
+"無効の場合、OrcaSlicer は従来のプリントホストの動作を使用します。"
+
 msgid "Allow Abnormal Storage"
 msgstr "異常なストレージを許可"
 
@@ -11169,6 +11187,12 @@ msgstr "タイムラプスを中止して印刷"
 msgid "Clean Up"
 msgstr "整理する"
 
+msgid "AMS filament mapping is not available for this printer. Clear the AMS mapping before printing."
+msgstr ""
+
+msgid "A filament used by this print has no AMS mapping. Assign it before printing."
+msgstr ""
+
 msgid "Preparing print job"
 msgstr "造形タスクを準備"
 
@@ -16580,6 +16604,12 @@ msgstr "Y軸対称インフィル"
 msgid "If the model has two parts that are symmetric about the Y axis, and you want these parts to have symmetric textures, please click this option on one of the parts."
 msgstr "モデルにY軸に対して対称な2つのパーツがあり、それらのテクスチャを対称にしたい場合は、一方のパーツでこのオプションをクリックしてください。"
 
+msgid "Fill pattern tops"
+msgstr ""
+
+msgid "Choose this option if you want to completely fill in the tops of the infill pattern"
+msgstr ""
+
 # AI Translated
 msgid "Infill combination - Max layer height"
 msgstr "インフィル結合 - 最大積層ピッチ"
@@ -30766,6 +30796,9 @@ msgstr "開発者ツールを有効化"
 msgid "An error occurred loading %s"
 msgstr "%s の読み込み中にエラーが発生しました"
 
+msgid "/"
+msgstr "/"
+
 # AI Translated
 #, boost-format
 msgid "Load %1% to %2%"
@@ -32506,9 +32539,6 @@ msgstr ""
 #~ msgid "An error occurred loading "
 #~ msgstr "読み込み中にエラーが発生しました: "
 
-#~ msgid "/"
-#~ msgstr "/"
-
 # AI Translated
 #, c-format, boost-format
 #~ msgid "Load %s to "
@@ -32715,6 +32745,10 @@ msgstr ""
 #~ msgid "Support/Color Painting: adjust section position"
 #~ msgstr "サポート/色塗り: 断面の位置"
 
+# AI Translated
+#~ msgid "(Experimental) Use printer agents instead of print hosts"
+#~ msgstr "(実験的) プリントホストの代わりにプリンターエージェントを使用"
+
 # AI Translated
 #~ msgid "Tab"
 #~ msgstr "Tab"

localization/i18n/ko/OrcaSlicer_ko.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-10-05 10:49-0300\n"
+"POT-Creation-Date: 2026-10-06 13:42+0800\n"
 "PO-Revision-Date: 2025-06-02 17:12+0900\n"
 "Last-Translator: crwusiz <crwusiz@gmail.com>\n"
 "Language-Team: \n"
@@ -4377,6 +4377,9 @@ msgstr "정말 필라멘트 정보를 삭제하시겠습니까?"
 msgid "You need to select the material type and color first."
 msgstr "재료 유형과 색상을 먼저 선택해야 합니다."
 
+msgid "The minimum temperature cannot be greater than the maximum temperature."
+msgstr ""
+
 #, c-format, boost-format
 msgid "Please input a valid value (K in %.1f~%.1f)"
 msgstr "유효한 값을 입력하세요 (%.1f~%.1f 사이의 K)"
@@ -6266,7 +6269,7 @@ msgid "Size:"
 msgstr "크기:"
 
 # AI Translated
-#, c-format, boost-format
+#, boost-format
 msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)."
 msgstr "레이어 %d, Z = %.2lf mm에서 G-code 경로 충돌이 발견되었습니다. 충돌하는 객체를 더 멀리 분리하세요 (%s <-> %s)."
 
@@ -7146,6 +7149,22 @@ msgstr ".gcode.3mf 파일에는 G-code 데이터가 없습니다. OrcaSlicer에
 msgid "File '%s' was lost! Please download it again."
 msgstr "'%s' 파일이 손실되었습니다! 다시 다운로드하세요."
 
+msgid "gcodes"
+msgstr ""
+
+msgid "Failed to delete the file from printer."
+msgstr ""
+
+#, c-format, boost-format
+msgid "Do you want to print the file '%s' from printer?"
+msgstr ""
+
+msgid "Print file"
+msgstr ""
+
+msgid "Failed to start the print job."
+msgstr ""
+
 #, c-format, boost-format
 msgid ""
 "File: %s\n"
@@ -10462,18 +10481,6 @@ msgstr "지원되지 않는 사전 설정 표시"
 msgid "Show incompatible/unsupported presets in the printer and filament dropdown lists. These presets cannot be selected."
 msgstr "프린터 및 필라멘트 드롭다운 목록에 호환되지 않거나 지원되지 않는 사전 설정을 표시합니다. 이러한 사전 설정은 선택할 수 없습니다."
 
-# AI Translated
-msgid "(Experimental) Use printer agents instead of print hosts"
-msgstr "(실험적) 출력 호스트 대신 프린터 에이전트 사용"
-
-# AI Translated
-msgid ""
-"Route print jobs for non-Bambu printers through printer plug-in agents instead of the classic print-host upload flow.\n"
-"When disabled, OrcaSlicer uses the legacy print-host behavior."
-msgstr ""
-"Bambu 이외의 프린터 출력 작업을 기존 출력 호스트 업로드 방식 대신 프린터 플러그인 에이전트를 통해 전달합니다.\n"
-"비활성화하면 OrcaSlicer는 기존 출력 호스트 동작을 사용합니다."
-
 # AI Translated
 msgid "Experimental Features"
 msgstr "실험적 기능"
@@ -10490,6 +10497,17 @@ msgstr ""
 "객체 메시를 변경한 후(자르기/디스크에서 다시 불러오기/단순화/수정 등)에도 칠한 기능(색상/재봉선/서포트/퍼지 등)을 유지하려고 시도합니다.\n"
 "매우 실험적인 기능입니다! 속도가 느리고 아티팩트가 생길 수 있습니다."
 
+msgid "Use printer agents instead of print hosts"
+msgstr ""
+
+# AI Translated
+msgid ""
+"Route print jobs for non-Bambu printers through printer plug-in agents instead of the classic print-host upload flow.\n"
+"When disabled, OrcaSlicer uses the legacy print-host behavior."
+msgstr ""
+"Bambu 이외의 프린터 출력 작업을 기존 출력 호스트 업로드 방식 대신 프린터 플러그인 에이전트를 통해 전달합니다.\n"
+"비활성화하면 OrcaSlicer는 기존 출력 호스트 동작을 사용합니다."
+
 # AI Translated
 msgid "Allow Abnormal Storage"
 msgstr "비정상 저장 장치 허용"
@@ -11310,6 +11328,12 @@ msgstr "타임랩스 취소 후 출력"
 msgid "Clean Up"
 msgstr "정리"
 
+msgid "AMS filament mapping is not available for this printer. Clear the AMS mapping before printing."
+msgstr ""
+
+msgid "A filament used by this print has no AMS mapping. Assign it before printing."
+msgstr ""
+
 msgid "Preparing print job"
 msgstr "출력 작업 준비 중"
 
@@ -16738,6 +16762,12 @@ msgstr "Y축 대칭 채우기"
 msgid "If the model has two parts that are symmetric about the Y axis, and you want these parts to have symmetric textures, please click this option on one of the parts."
 msgstr "모델에 Y축을 기준으로 대칭인 두 부품이 있고 이 부품들이 대칭 질감을 갖게 하려면, 두 부품 중 하나에서 이 옵션을 선택하십시오."
 
+msgid "Fill pattern tops"
+msgstr ""
+
+msgid "Choose this option if you want to completely fill in the tops of the infill pattern"
+msgstr ""
+
 msgid "Infill combination - Max layer height"
 msgstr "채우기 조합 - 최대 레이어 높이"
 
@@ -30783,6 +30813,9 @@ msgstr "개발자 도구 사용"
 msgid "An error occurred loading %s"
 msgstr "%s 로드 중 오류가 발생했습니다"
 
+msgid "/"
+msgstr "/"
+
 # AI Translated
 #, boost-format
 msgid "Load %1% to %2%"
@@ -32495,9 +32528,6 @@ msgstr ""
 #~ msgid "An error occurred loading "
 #~ msgstr "로드 중 오류가 발생했습니다: "
 
-#~ msgid "/"
-#~ msgstr "/"
-
 # AI Translated
 #, c-format, boost-format
 #~ msgid "Load %s to "
@@ -32704,6 +32734,10 @@ msgstr ""
 #~ msgid "Support/Color Painting: adjust section position"
 #~ msgstr "서포트/색상 칠하기: 단면 위치 조정"
 
+# AI Translated
+#~ msgid "(Experimental) Use printer agents instead of print hosts"
+#~ msgstr "(실험적) 출력 호스트 대신 프린터 에이전트 사용"
+
 # AI Translated
 #~ msgid "Tab"
 #~ msgstr "탭"

localization/i18n/list.txt

@@ -147,6 +147,7 @@ src/slic3r/GUI/HMSPanel.cpp
 src/slic3r/GUI/MainFrame.cpp
 src/slic3r/GUI/MediaPlayCtrl.cpp
 src/slic3r/GUI/MediaFilePanel.cpp
+src/slic3r/GUI/OrcaFilesPanel.cpp
 src/slic3r/GUI/ImageGrid.cpp
 src/slic3r/GUI/Widgets/ImageSwitchButton.cpp
 src/slic3r/GUI/Printer/PrinterFileSystem.cpp

localization/i18n/lt/OrcaSlicer_lt.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-10-05 10:49-0300\n"
+"POT-Creation-Date: 2026-10-06 13:42+0800\n"
 "PO-Revision-Date: 2026-07-02 14:13+0300\n"
 "Last-Translator: Gintaras Kučinskas <sharanchius@gmail.com>\n"
 "Language-Team: \n"
@@ -4343,6 +4343,9 @@ msgstr "Ar jūs tikrai norite išvalyti gijos informaciją?"
 msgid "You need to select the material type and color first."
 msgstr "Pradžioje jums reikia pasirinkti medžiagos tipą ir spalvą."
 
+msgid "The minimum temperature cannot be greater than the maximum temperature."
+msgstr ""
+
 #, c-format, boost-format
 msgid "Please input a valid value (K in %.1f~%.1f)"
 msgstr "Įveskite tinkamą reikšmę (K %.1f~%.1f)"
@@ -6222,7 +6225,7 @@ msgid "Size:"
 msgstr "Dydis:"
 
 # AI Translated
-#, c-format, boost-format
+#, boost-format
 msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)."
 msgstr "Rasta G-code trajektorijų konfliktų %d sluoksnyje, Z = %.2lfmm. Prašome labiau atskirti konfliktuojančius objektus (%s <-> %s)."
 
@@ -7107,6 +7110,22 @@ msgstr "Failas „.gcode.3mf“ neturi G-code duomenų. Supjaustykite jį su „
 msgid "File '%s' was lost! Please download it again."
 msgstr "Failas „%s“ nerastas! Atsisiųskite jį iš naujo."
 
+msgid "gcodes"
+msgstr ""
+
+msgid "Failed to delete the file from printer."
+msgstr ""
+
+#, c-format, boost-format
+msgid "Do you want to print the file '%s' from printer?"
+msgstr ""
+
+msgid "Print file"
+msgstr ""
+
+msgid "Failed to start the print job."
+msgstr ""
+
 #, c-format, boost-format
 msgid ""
 "File: %s\n"
@@ -10297,18 +10316,6 @@ msgstr "Rodyti nepalaikomus profilius"
 msgid "Show incompatible/unsupported presets in the printer and filament dropdown lists. These presets cannot be selected."
 msgstr "Rodyti nesuderinamus / nepalaikomus profilius spausdintuvų ir gijų išskleidžiamuosiuose sąrašuose. Šių profilių pasirinkti negalima."
 
-# AI Translated
-msgid "(Experimental) Use printer agents instead of print hosts"
-msgstr "(Eksperimentinė) Naudoti spausdintuvo agentus vietoj spausdinimo serverių"
-
-# AI Translated
-msgid ""
-"Route print jobs for non-Bambu printers through printer plug-in agents instead of the classic print-host upload flow.\n"
-"When disabled, OrcaSlicer uses the legacy print-host behavior."
-msgstr ""
-"Nukreipia ne Bambu spausdintuvų spausdinimo užduotis per spausdintuvo papildinių agentus, o ne per klasikinį įkėlimo į spausdinimo serverį srautą.\n"
-"Kai išjungta, OrcaSlicer naudoja senąjį spausdinimo serverio veikimą."
-
 msgid "Experimental Features"
 msgstr "Eksperimentinis"
 
@@ -10322,6 +10329,17 @@ msgstr ""
 "Bando išsaugoti nudažytas ypatybes (spalvą, siūlę, atramas, šiauštą paviršių ir kt.) pakeitus objekto tinklelio modelį (pvz., po pjovimo, įkėlimo iš naujo, supaprastinimo, taisymo ir kt.)\n"
 "Labai eksperimentinė funkcija! Veikia lėtai ir gali sukurti artefaktų."
 
+msgid "Use printer agents instead of print hosts"
+msgstr ""
+
+# AI Translated
+msgid ""
+"Route print jobs for non-Bambu printers through printer plug-in agents instead of the classic print-host upload flow.\n"
+"When disabled, OrcaSlicer uses the legacy print-host behavior."
+msgstr ""
+"Nukreipia ne Bambu spausdintuvų spausdinimo užduotis per spausdintuvo papildinių agentus, o ne per klasikinį įkėlimo į spausdinimo serverį srautą.\n"
+"Kai išjungta, OrcaSlicer naudoja senąjį spausdinimo serverio veikimą."
+
 msgid "Allow Abnormal Storage"
 msgstr "Leisti sutrikusią (neįprastą) laikmeną"
 
@@ -11132,6 +11150,12 @@ msgstr "Atšaukti intervalinį fotografavimą ir spausdinti"
 msgid "Clean Up"
 msgstr "Išvalyti"
 
+msgid "AMS filament mapping is not available for this printer. Clear the AMS mapping before printing."
+msgstr ""
+
+msgid "A filament used by this print has no AMS mapping. Assign it before printing."
+msgstr ""
+
 msgid "Preparing print job"
 msgstr "Spausdinimo užduoties rengimas"
 
@@ -16362,6 +16386,12 @@ msgstr "Simetriškas užpildas pagal Y ašį"
 msgid "If the model has two parts that are symmetric about the Y axis, and you want these parts to have symmetric textures, please click this option on one of the parts."
 msgstr "Jei modelis turi dvi dalis, kurios yra simetriškos Y ašies atžvilgiu, ir norite, kad šios dalys turėtų simetriškas tekstūras, spustelėkite šią parinktį vienoje iš dalių."
 
+msgid "Fill pattern tops"
+msgstr ""
+
+msgid "Choose this option if you want to completely fill in the tops of the infill pattern"
+msgstr ""
+
 msgid "Infill combination - Max layer height"
 msgstr "Užpildo derinimas – maksimalus sluoksnio aukštis"
 
@@ -30116,6 +30146,10 @@ msgstr "Įjungti kūrėjo įrankius"
 msgid "An error occurred loading %s"
 msgstr "Įvyko klaida įkeliant %s"
 
+# AI Translated
+msgid "/"
+msgstr "/"
+
 # AI Translated
 #, boost-format
 msgid "Load %1% to %2%"
@@ -30796,6 +30830,10 @@ msgstr ""
 "Venkite deformacijų (warping)\n"
 "Ar žinojote, kad spausdinant medžiagas, kurios yra linkusios trauktis ir riestis (pvz., ABS), tinkamas kaitinamojo pagrindo temperatūros padidinimas gali sumažinti deformacijų (warping) tikimybę?"
 
+# AI Translated
+#~ msgid "(Experimental) Use printer agents instead of print hosts"
+#~ msgstr "(Eksperimentinė) Naudoti spausdintuvo agentus vietoj spausdinimo serverių"
+
 #~ msgid "X"
 #~ msgstr "X"
 
@@ -31824,10 +31862,6 @@ msgstr ""
 #~ msgid "An error occurred loading "
 #~ msgstr "Įvyko klaida įkeliant "
 
-# AI Translated
-#~ msgid "/"
-#~ msgstr "/"
-
 # AI Translated
 #, c-format, boost-format
 #~ msgid "Load %s to "

localization/i18n/nl/OrcaSlicer_nl.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-10-05 10:49-0300\n"
+"POT-Creation-Date: 2026-10-06 13:42+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -4719,6 +4719,9 @@ msgstr "Weet u zeker dat u de filamentinformatie wilt wissen?"
 msgid "You need to select the material type and color first."
 msgstr "U moet eerst het materiaaltype en de kleur selecteren."
 
+msgid "The minimum temperature cannot be greater than the maximum temperature."
+msgstr ""
+
 # AI Translated
 #, c-format, boost-format
 msgid "Please input a valid value (K in %.1f~%.1f)"
@@ -6746,7 +6749,7 @@ msgid "Size:"
 msgstr "Maat:"
 
 # AI Translated
-#, c-format, boost-format
+#, boost-format
 msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)."
 msgstr "Er zijn conflicten tussen G-code-paden gevonden op laag %d, Z = %.2lfmm. Plaats de conflicterende objecten verder uit elkaar (%s <-> %s)."
 
@@ -7686,6 +7689,22 @@ msgstr "Het .gcode.3mf-bestand bevat geen G-code-gegevens. Slice het met Orca Sl
 msgid "File '%s' was lost! Please download it again."
 msgstr "Bestand '%s' is verloren gegaan! Download het opnieuw."
 
+msgid "gcodes"
+msgstr ""
+
+msgid "Failed to delete the file from printer."
+msgstr ""
+
+#, c-format, boost-format
+msgid "Do you want to print the file '%s' from printer?"
+msgstr ""
+
+msgid "Print file"
+msgstr ""
+
+msgid "Failed to start the print job."
+msgstr ""
+
 #, c-format, boost-format
 msgid ""
 "File: %s\n"
@@ -11154,18 +11173,6 @@ msgstr "Niet-ondersteunde voorinstellingen tonen"
 msgid "Show incompatible/unsupported presets in the printer and filament dropdown lists. These presets cannot be selected."
 msgstr "Toon incompatibele/niet-ondersteunde voorinstellingen in de keuzelijsten voor printer en filament. Deze voorinstellingen kunnen niet worden geselecteerd."
 
-# AI Translated
-msgid "(Experimental) Use printer agents instead of print hosts"
-msgstr "(Experimenteel) Printeragents gebruiken in plaats van printhosts"
-
-# AI Translated
-msgid ""
-"Route print jobs for non-Bambu printers through printer plug-in agents instead of the classic print-host upload flow.\n"
-"When disabled, OrcaSlicer uses the legacy print-host behavior."
-msgstr ""
-"Stuurt printtaken voor niet-Bambu-printers via printer-plug-inagents in plaats van via de klassieke uploadstroom naar de printhost.\n"
-"Wanneer dit is uitgeschakeld, gebruikt OrcaSlicer het oude printhostgedrag."
-
 # AI Translated
 msgid "Experimental Features"
 msgstr "Experimentele functies"
@@ -11182,6 +11189,17 @@ msgstr ""
 "Probeer geschilderde kenmerken (kleur/naad/ondersteuning/vaag enz.) te behouden na het wijzigen van de mesh van het object (zoals snijden/opnieuw laden vanaf schijf/vereenvoudigen/repareren enz.)\n"
 "Zeer experimenteel! Traag en kan artefacten veroorzaken."
 
+msgid "Use printer agents instead of print hosts"
+msgstr ""
+
+# AI Translated
+msgid ""
+"Route print jobs for non-Bambu printers through printer plug-in agents instead of the classic print-host upload flow.\n"
+"When disabled, OrcaSlicer uses the legacy print-host behavior."
+msgstr ""
+"Stuurt printtaken voor niet-Bambu-printers via printer-plug-inagents in plaats van via de klassieke uploadstroom naar de printhost.\n"
+"Wanneer dit is uitgeschakeld, gebruikt OrcaSlicer het oude printhostgedrag."
+
 # AI Translated
 msgid "Allow Abnormal Storage"
 msgstr "Afwijkend opslagmedium toestaan"
@@ -12026,6 +12044,12 @@ msgstr "Timelapse annuleren en printen"
 msgid "Clean Up"
 msgstr "Opruimen"
 
+msgid "AMS filament mapping is not available for this printer. Clear the AMS mapping before printing."
+msgstr ""
+
+msgid "A filament used by this print has no AMS mapping. Assign it before printing."
+msgstr ""
+
 msgid "Preparing print job"
 msgstr "Print opdracht voorbereiden"
 
@@ -17772,6 +17796,12 @@ msgstr "Symmetrische vulling om de Y-as"
 msgid "If the model has two parts that are symmetric about the Y axis, and you want these parts to have symmetric textures, please click this option on one of the parts."
 msgstr "Als het model twee delen heeft die symmetrisch zijn ten opzichte van de Y-as en u wilt dat deze delen symmetrische texturen hebben, klik dan op deze optie bij een van de delen."
 
+msgid "Fill pattern tops"
+msgstr ""
+
+msgid "Choose this option if you want to completely fill in the tops of the infill pattern"
+msgstr ""
+
 # AI Translated
 msgid "Infill combination - Max layer height"
 msgstr "Vullingcombinatie - Maximale laaghoogte"
@@ -32314,6 +32344,9 @@ msgstr "Ontwikkelaarstools inschakelen"
 msgid "An error occurred loading %s"
 msgstr "Er is een fout opgetreden bij het laden van %s"
 
+msgid "/"
+msgstr "/"
+
 # AI Translated
 #, boost-format
 msgid "Load %1% to %2%"
@@ -34080,9 +34113,6 @@ msgstr ""
 #~ msgid "An error occurred loading "
 #~ msgstr "Er is een fout opgetreden bij het laden van "
 
-#~ msgid "/"
-#~ msgstr "/"
-
 # AI Translated
 #, c-format, boost-format
 #~ msgid "Load %s to "
@@ -34292,6 +34322,10 @@ msgstr ""
 #~ msgid "Support/Color Painting: adjust section position"
 #~ msgstr "Support/kleur intekenen: pas de sectie positie aan"
 
+# AI Translated
+#~ msgid "(Experimental) Use printer agents instead of print hosts"
+#~ msgstr "(Experimenteel) Printeragents gebruiken in plaats van printhosts"
+
 # AI Translated
 #~ msgid "Tab"
 #~ msgstr "Tab"

localization/i18n/pl/OrcaSlicer_pl.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: OrcaSlicer 2.3.0-rc\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-10-05 10:49-0300\n"
+"POT-Creation-Date: 2026-10-06 13:42+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: Krzysztof Morga <<tlumaczeniebs@gmail.com>>\n"
 "Language-Team: \n"
@@ -4438,6 +4438,9 @@ msgstr "Czy na pewno usunąć informacje o filamentach?"
 msgid "You need to select the material type and color first."
 msgstr "Najpierw należy wybrać rodzaj i kolor filamentu."
 
+msgid "The minimum temperature cannot be greater than the maximum temperature."
+msgstr ""
+
 #, c-format, boost-format
 msgid "Please input a valid value (K in %.1f~%.1f)"
 msgstr "Proszę podać prawidłową wartość (K w zakresie %.1f~%.1f)"
@@ -6341,7 +6344,7 @@ msgstr "Objętość:"
 msgid "Size:"
 msgstr "Rozmiar:"
 
-#, c-format, boost-format
+#, boost-format
 msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)."
 msgstr "Wykryto konflikty ścieżek G-code na warstwie %d, Z = %.2lfmm. Proszę oddalić od siebie obiekty będące w konflikcie (%s <-> %s)."
 
@@ -7238,6 +7241,22 @@ msgstr "Plik .gcode.3mf nie zawiera danych G-code. Proszę poddać go obróbce w
 msgid "File '%s' was lost! Please download it again."
 msgstr "Plik „%s” został utracony! Proszę pobrać go ponownie."
 
+msgid "gcodes"
+msgstr ""
+
+msgid "Failed to delete the file from printer."
+msgstr ""
+
+#, c-format, boost-format
+msgid "Do you want to print the file '%s' from printer?"
+msgstr ""
+
+msgid "Print file"
+msgstr ""
+
+msgid "Failed to start the print job."
+msgstr ""
+
 #, c-format, boost-format
 msgid ""
 "File: %s\n"
@@ -10560,18 +10579,6 @@ msgstr "Pokaż nieobsługiwane profile"
 msgid "Show incompatible/unsupported presets in the printer and filament dropdown lists. These presets cannot be selected."
 msgstr "Pokazuj niekompatybilne/nieobsługiwane profile na listach rozwijanych drukarek i filamentów. Tych profili nie można wybrać."
 
-# AI Translated
-msgid "(Experimental) Use printer agents instead of print hosts"
-msgstr "(Eksperymentalne) Używaj agentów drukarki zamiast serwerów druku"
-
-# AI Translated
-msgid ""
-"Route print jobs for non-Bambu printers through printer plug-in agents instead of the classic print-host upload flow.\n"
-"When disabled, OrcaSlicer uses the legacy print-host behavior."
-msgstr ""
-"Kieruje zadania druku dla drukarek innych niż Bambu przez agentów wtyczek drukarki zamiast klasycznego przesyłania do serwera druku.\n"
-"Gdy opcja jest wyłączona, OrcaSlicer korzysta z dotychczasowego działania serwera druku."
-
 # AI Translated
 msgid "Experimental Features"
 msgstr "Funkcje eksperymentalne"
@@ -10588,6 +10595,17 @@ msgstr ""
 "Próbuje zachować malowane cechy (kolor/szew/podpory/skórę fuzzy itp.) po zmianie siatki obiektu (np. cięcie/wczytanie ponownie z dysku/uproszczenie/naprawa itp.)\n"
 "Wysoce eksperymentalne! Powolne i może tworzyć artefakty."
 
+msgid "Use printer agents instead of print hosts"
+msgstr ""
+
+# AI Translated
+msgid ""
+"Route print jobs for non-Bambu printers through printer plug-in agents instead of the classic print-host upload flow.\n"
+"When disabled, OrcaSlicer uses the legacy print-host behavior."
+msgstr ""
+"Kieruje zadania druku dla drukarek innych niż Bambu przez agentów wtyczek drukarki zamiast klasycznego przesyłania do serwera druku.\n"
+"Gdy opcja jest wyłączona, OrcaSlicer korzysta z dotychczasowego działania serwera druku."
+
 # AI Translated
 msgid "Allow Abnormal Storage"
 msgstr "Zezwalaj na nieprawidłową pamięć"
@@ -11411,6 +11429,12 @@ msgstr "Anuluj timelapse i drukuj"
 msgid "Clean Up"
 msgstr "Wyczyść"
 
+msgid "AMS filament mapping is not available for this printer. Clear the AMS mapping before printing."
+msgstr ""
+
+msgid "A filament used by this print has no AMS mapping. Assign it before printing."
+msgstr ""
+
 msgid "Preparing print job"
 msgstr "Przygotowywanie zadania do druku"
 
@@ -16799,6 +16823,12 @@ msgstr "Symetryczne wypełnienie względem osi Y"
 msgid "If the model has two parts that are symmetric about the Y axis, and you want these parts to have symmetric textures, please click this option on one of the parts."
 msgstr "Jeśli model ma dwie części symetryczne względem osi Y i chcesz, aby miały symetryczne tekstury, zaznacz tę opcję dla jednej z części."
 
+msgid "Fill pattern tops"
+msgstr ""
+
+msgid "Choose this option if you want to completely fill in the tops of the infill pattern"
+msgstr ""
+
 msgid "Infill combination - Max layer height"
 msgstr "Kombinacja wypełnienia - Maks. wysokość warstwy"
 
@@ -30768,6 +30798,9 @@ msgstr "Włącz narzędzia deweloperskie"
 msgid "An error occurred loading %s"
 msgstr "Wystąpił błąd podczas ładowania %s"
 
+msgid "/"
+msgstr "/"
+
 # AI Translated
 #, boost-format
 msgid "Load %1% to %2%"
@@ -31447,6 +31480,10 @@ msgstr ""
 "Unikaj odkształceń\n"
 "Czy wiesz, że podczas drukowania filamentami podatnymi na odkształcenia, takimi jak ABS, odpowiednie zwiększenie temperatury podgrzewanej płyty może zmniejszyć prawdopodobieństwo odkształceń?"
 
+# AI Translated
+#~ msgid "(Experimental) Use printer agents instead of print hosts"
+#~ msgstr "(Eksperymentalne) Używaj agentów drukarki zamiast serwerów druku"
+
 #~ msgid "X"
 #~ msgstr "X"
 
@@ -32445,9 +32482,6 @@ msgstr ""
 #~ msgid "An error occurred loading "
 #~ msgstr "Wystąpił błąd podczas ładowania"
 
-#~ msgid "/"
-#~ msgstr "/"
-
 # AI Translated
 #, c-format, boost-format
 #~ msgid "Load %s to "

localization/i18n/pt_BR/OrcaSlicer_pt_BR.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-10-05 10:49-0300\n"
+"POT-Creation-Date: 2026-10-06 13:42+0800\n"
 "PO-Revision-Date: 2026-07-26 11:14-0300\n"
 "Last-Translator: Alexandre Folle de Menezes\n"
 "Language-Team: Portuguese, Brazilian\n"
@@ -4184,6 +4184,9 @@ msgstr "Tem certeza de que deseja limpar as informações do filamento?"
 msgid "You need to select the material type and color first."
 msgstr "Você precisa selecionar o tipo e a cor do material primeiro."
 
+msgid "The minimum temperature cannot be greater than the maximum temperature."
+msgstr ""
+
 #, c-format, boost-format
 msgid "Please input a valid value (K in %.1f~%.1f)"
 msgstr "Por favor insira um valor válido (K entre %.1f~%.1f)"
@@ -6015,7 +6018,7 @@ msgstr "Volume:"
 msgid "Size:"
 msgstr "Tamanho:"
 
-#, c-format, boost-format
+#, boost-format
 msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)."
 msgstr "Foram encontrados conflitos de caminhos de G-code na camada %d, Z = %.2lfmm. Por favor, separe mais os objetos em conflito (%s <-> %s)."
 
@@ -6878,6 +6881,22 @@ msgstr "O arquivo .gcode.3mf não contém dados de G-code. Por favor, fatie com
 msgid "File '%s' was lost! Please download it again."
 msgstr "O arquivo '%s' foi perdido! Por favor, baixe-o novamente."
 
+msgid "gcodes"
+msgstr ""
+
+msgid "Failed to delete the file from printer."
+msgstr ""
+
+#, c-format, boost-format
+msgid "Do you want to print the file '%s' from printer?"
+msgstr ""
+
+msgid "Print file"
+msgstr ""
+
+msgid "Failed to start the print job."
+msgstr ""
+
 #, c-format, boost-format
 msgid ""
 "File: %s\n"
@@ -9940,16 +9959,6 @@ msgstr "Mostrar predefinições não suportadas"
 msgid "Show incompatible/unsupported presets in the printer and filament dropdown lists. These presets cannot be selected."
 msgstr "Exibir predefinições incompatíveis e não suportadas nas listas de impressora e filamento. Essas predefinições não podem ser selecionadas."
 
-msgid "(Experimental) Use printer agents instead of print hosts"
-msgstr "(Experimental) Usar agentes de impressora em vez de hosts de impressão"
-
-msgid ""
-"Route print jobs for non-Bambu printers through printer plug-in agents instead of the classic print-host upload flow.\n"
-"When disabled, OrcaSlicer uses the legacy print-host behavior."
-msgstr ""
-"Encaminha os trabalhos de impressão de impressoras que não são Bambu pelos agentes de plugin de impressora em vez do fluxo clássico de envio ao host de impressão.\n"
-"Quando desativado, o OrcaSlicer usa o comportamento antigo do host de impressão."
-
 msgid "Experimental Features"
 msgstr "Recursos Experimentais"
 
@@ -9963,6 +9972,16 @@ msgstr ""
 "Tenta manter recursos pintados (cor/costura/suporte/textura difusa etc.) após alterar a malha do objeto (como cortar/recarregar do disco/simplificar/corrigir etc.)\n"
 "Altamente experimental! Lento e pode criar artefatos."
 
+msgid "Use printer agents instead of print hosts"
+msgstr ""
+
+msgid ""
+"Route print jobs for non-Bambu printers through printer plug-in agents instead of the classic print-host upload flow.\n"
+"When disabled, OrcaSlicer uses the legacy print-host behavior."
+msgstr ""
+"Encaminha os trabalhos de impressão de impressoras que não são Bambu pelos agentes de plugin de impressora em vez do fluxo clássico de envio ao host de impressão.\n"
+"Quando desativado, o OrcaSlicer usa o comportamento antigo do host de impressão."
+
 msgid "Allow Abnormal Storage"
 msgstr "Permitir Armazenamento Anormal"
 
@@ -10719,6 +10738,12 @@ msgstr "Cancelar Timelapse e Imprimir"
 msgid "Clean Up"
 msgstr "Limpar"
 
+msgid "AMS filament mapping is not available for this printer. Clear the AMS mapping before printing."
+msgstr ""
+
+msgid "A filament used by this print has no AMS mapping. Assign it before printing."
+msgstr ""
+
 msgid "Preparing print job"
 msgstr "Preparando trabalho de impressão"
 
@@ -15794,6 +15819,12 @@ msgstr "Preenchimento simétrico no eixo Y"
 msgid "If the model has two parts that are symmetric about the Y axis, and you want these parts to have symmetric textures, please click this option on one of the parts."
 msgstr "Se o modelo tiver duas partes simétricas em relação ao eixo Y e você quiser que essas partes tenham texturas simétricas, clique nesta opção em uma das partes."
 
+msgid "Fill pattern tops"
+msgstr ""
+
+msgid "Choose this option if you want to completely fill in the tops of the infill pattern"
+msgstr ""
+
 msgid "Infill combination - Max layer height"
 msgstr "Combinação de preenchimento - Altura máx da camada"
 
@@ -29339,6 +29370,10 @@ msgstr "Ativar Ferramentas de Desenvolvedor"
 msgid "An error occurred loading %s"
 msgstr "Ocorreu um erro ao carregar %s"
 
+# AI Translated
+msgid "/"
+msgstr "/"
+
 # AI Translated
 #, boost-format
 msgid "Load %1% to %2%"
@@ -30018,6 +30053,9 @@ msgstr ""
 "Evitar empenamento\n"
 "Você sabia que ao imprimir materiais propensos ao empenamento como ABS, aumentar adequadamente a temperatura da mesa aquecida pode reduzir a probabilidade de empenamento?"
 
+#~ msgid "(Experimental) Use printer agents instead of print hosts"
+#~ msgstr "(Experimental) Usar agentes de impressora em vez de hosts de impressão"
+
 #~ msgid "X"
 #~ msgstr "X"
 
@@ -31039,10 +31077,6 @@ msgstr ""
 #~ msgid "An error occurred loading "
 #~ msgstr "Ocorreu um erro ao carregar "
 
-# AI Translated
-#~ msgid "/"
-#~ msgstr "/"
-
 # AI Translated
 #, c-format, boost-format
 #~ msgid "Load %s to "

localization/i18n/ru/OrcaSlicer_ru.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: OrcaSlicer V2.5.0\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-10-05 10:49-0300\n"
+"POT-Creation-Date: 2026-10-06 13:42+0800\n"
 "PO-Revision-Date: 2026-02-25 13:38+0300\n"
 "Last-Translator: Felix14_v2\n"
 "Language-Team: Felix14_v2 (ДС/ТГ: @felix14_v2, почта: aleks111001@list.ru), Andylg <andylg@yandex.ru>\n"
@@ -4319,6 +4319,9 @@ msgstr "Вы действительно хотите удалить информ
 msgid "You need to select the material type and color first."
 msgstr "Сначала нужно выбрать тип материала и цвет."
 
+msgid "The minimum temperature cannot be greater than the maximum temperature."
+msgstr ""
+
 #, c-format, boost-format
 msgid "Please input a valid value (K in %.1f~%.1f)"
 msgstr "Пожалуйста, введите допустимое значение (K в диапазоне %.1f~%.1f)"
@@ -6233,7 +6236,7 @@ msgstr "Объём:"
 msgid "Size:"
 msgstr "Размер:"
 
-#, c-format, boost-format
+#, boost-format
 msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)."
 msgstr "В G-code на %d слое (z = %.2lf мм) обнаружен конфликт путей. Пожалуйста, разместите конфликтующие модели дальше друг от друга (%s <-> %s)."
 
@@ -7144,6 +7147,22 @@ msgstr "Файл .gcode.3mf не содержит данных G-code. Испо
 msgid "File '%s' was lost! Please download it again."
 msgstr "Файл '%s' потерян! Пожалуйста, загрузите его снова."
 
+msgid "gcodes"
+msgstr ""
+
+msgid "Failed to delete the file from printer."
+msgstr ""
+
+#, c-format, boost-format
+msgid "Do you want to print the file '%s' from printer?"
+msgstr ""
+
+msgid "Print file"
+msgstr ""
+
+msgid "Failed to start the print job."
+msgstr ""
+
 #, c-format, boost-format
 msgid ""
 "File: %s\n"
@@ -10321,18 +10340,6 @@ msgstr ""
 "\n"
 "Примечание: профили остаются недоступными для выбора."
 
-# AI Translated
-msgid "(Experimental) Use printer agents instead of print hosts"
-msgstr "(Экспериментально) Использовать агентов принтера вместо хостов печати"
-
-# AI Translated
-msgid ""
-"Route print jobs for non-Bambu printers through printer plug-in agents instead of the classic print-host upload flow.\n"
-"When disabled, OrcaSlicer uses the legacy print-host behavior."
-msgstr ""
-"Отправлять задания печати для принтеров, отличных от Bambu, через агентов плагинов принтера вместо классической загрузки на хост печати.\n"
-"Если отключено, OrcaSlicer использует прежнее поведение хоста печати."
-
 msgid "Experimental Features"
 msgstr "Экспериментальные настройки"
 
@@ -10347,6 +10354,17 @@ msgstr ""
 "\n"
 "Внимание: функция экспериментальна! Возможны падение производительности и артефакты работы."
 
+msgid "Use printer agents instead of print hosts"
+msgstr ""
+
+# AI Translated
+msgid ""
+"Route print jobs for non-Bambu printers through printer plug-in agents instead of the classic print-host upload flow.\n"
+"When disabled, OrcaSlicer uses the legacy print-host behavior."
+msgstr ""
+"Отправлять задания печати для принтеров, отличных от Bambu, через агентов плагинов принтера вместо классической загрузки на хост печати.\n"
+"Если отключено, OrcaSlicer использует прежнее поведение хоста печати."
+
 msgid "Allow Abnormal Storage"
 msgstr "Игнорировать неисправность хранилища"
 
@@ -11145,6 +11163,12 @@ msgstr "Отключить таймлапс и продолжить"
 msgid "Clean Up"
 msgstr "Очистить"
 
+msgid "AMS filament mapping is not available for this printer. Clear the AMS mapping before printing."
+msgstr ""
+
+msgid "A filament used by this print has no AMS mapping. Assign it before printing."
+msgstr ""
+
 msgid "Preparing print job"
 msgstr "Подготовка задания на печать"
 
@@ -16569,6 +16593,12 @@ msgstr "Отразить шаблон"
 msgid "If the model has two parts that are symmetric about the Y axis, and you want these parts to have symmetric textures, please click this option on one of the parts."
 msgstr "Если модель состоит из двух симметричных частей, у одной из них можно отразить шаблон заполнения, чтобы модель имела симметричную текстуру поверхности."
 
+msgid "Fill pattern tops"
+msgstr ""
+
+msgid "Choose this option if you want to completely fill in the tops of the infill pattern"
+msgstr ""
+
 msgid "Infill combination - Max layer height"
 msgstr "Предел высоты объединённого слоя"
 
@@ -30607,6 +30637,9 @@ msgstr "Включить инструменты разработчика"
 msgid "An error occurred loading %s"
 msgstr "Ошибка при загрузке %s"
 
+msgid "/"
+msgstr "/"
+
 # AI Translated
 #, boost-format
 msgid "Load %1% to %2%"
@@ -31284,6 +31317,10 @@ msgstr ""
 "Предотвращение коробления материала\n"
 "Знаете ли вы, что при печати материалами, склонными к короблению, таких как ABS, повышение температуры подогреваемого стола может снизить эту вероятность?"
 
+# AI Translated
+#~ msgid "(Experimental) Use printer agents instead of print hosts"
+#~ msgstr "(Экспериментально) Использовать агентов принтера вместо хостов печати"
+
 #~ msgid "X"
 #~ msgstr "X"
 
@@ -32318,9 +32355,6 @@ msgstr ""
 #~ msgid "An error occurred loading "
 #~ msgstr "Ошибка при загрузке "
 
-#~ msgid "/"
-#~ msgstr "/"
-
 # AI Translated
 #, c-format, boost-format
 #~ msgid "Load %s to "

localization/i18n/sv/OrcaSlicer_sv.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-10-05 10:49-0300\n"
+"POT-Creation-Date: 2026-10-06 13:42+0800\n"
 "Language: sv\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -4784,6 +4784,9 @@ msgstr "Är du säker på att du vill rensa filament informationen?"
 msgid "You need to select the material type and color first."
 msgstr "Du måste först välja materialtyp och färg."
 
+msgid "The minimum temperature cannot be greater than the maximum temperature."
+msgstr ""
+
 # AI Translated
 #, c-format, boost-format
 msgid "Please input a valid value (K in %.1f~%.1f)"
@@ -6840,7 +6843,7 @@ msgid "Size:"
 msgstr "Storlek:"
 
 # AI Translated
-#, c-format, boost-format
+#, boost-format
 msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)."
 msgstr "Konflikter mellan G-code-banor hittades på lager %d, Z = %.2lfmm. Placera de objekt som krockar längre ifrån varandra (%s <-> %s)."
 
@@ -7781,6 +7784,22 @@ msgstr "Filen .gcode.3mf innehåller inga G-code-data. Bered den med Orca Slicer
 msgid "File '%s' was lost! Please download it again."
 msgstr "Filen '%s' förlorades! Ladda ner den igen."
 
+msgid "gcodes"
+msgstr ""
+
+msgid "Failed to delete the file from printer."
+msgstr ""
+
+#, c-format, boost-format
+msgid "Do you want to print the file '%s' from printer?"
+msgstr ""
+
+msgid "Print file"
+msgstr ""
+
+msgid "Failed to start the print job."
+msgstr ""
+
 # AI Translated
 #, c-format, boost-format
 msgid ""
@@ -11297,18 +11316,6 @@ msgstr "Visa förinställningar som inte stöds"
 msgid "Show incompatible/unsupported presets in the printer and filament dropdown lists. These presets cannot be selected."
 msgstr "Visa inkompatibla förinställningar och förinställningar som inte stöds i rullgardinslistorna för skrivare och filament. Dessa förinställningar kan inte väljas."
 
-# AI Translated
-msgid "(Experimental) Use printer agents instead of print hosts"
-msgstr "(Experimentellt) Använd skrivaragenter i stället för utskriftsvärdar"
-
-# AI Translated
-msgid ""
-"Route print jobs for non-Bambu printers through printer plug-in agents instead of the classic print-host upload flow.\n"
-"When disabled, OrcaSlicer uses the legacy print-host behavior."
-msgstr ""
-"Skickar utskriftsjobb för icke-Bambu-skrivare via skrivarens insticksmodulagenter i stället för det klassiska uppladdningsflödet till utskriftsvärden.\n"
-"När detta är avaktiverat använder OrcaSlicer det äldre beteendet för utskriftsvärdar."
-
 # AI Translated
 msgid "Experimental Features"
 msgstr "Experimentella funktioner"
@@ -11325,6 +11332,17 @@ msgstr ""
 "Försök att behålla målade egenskaper (färg/söm/support/ojämn yta osv.) efter att objektets mesh ändrats (t.ex. snitt, läs in från disk igen, förenkla, reparera osv.)\n"
 "Mycket experimentellt! Långsamt och kan skapa artefakter."
 
+msgid "Use printer agents instead of print hosts"
+msgstr ""
+
+# AI Translated
+msgid ""
+"Route print jobs for non-Bambu printers through printer plug-in agents instead of the classic print-host upload flow.\n"
+"When disabled, OrcaSlicer uses the legacy print-host behavior."
+msgstr ""
+"Skickar utskriftsjobb för icke-Bambu-skrivare via skrivarens insticksmodulagenter i stället för det klassiska uppladdningsflödet till utskriftsvärden.\n"
+"När detta är avaktiverat använder OrcaSlicer det äldre beteendet för utskriftsvärdar."
+
 # AI Translated
 msgid "Allow Abnormal Storage"
 msgstr "Tillåt onormalt lagringsmedium"
@@ -12175,6 +12193,12 @@ msgstr "Avbryt timelapse och skriv ut"
 msgid "Clean Up"
 msgstr "Rensa"
 
+msgid "AMS filament mapping is not available for this printer. Clear the AMS mapping before printing."
+msgstr ""
+
+msgid "A filament used by this print has no AMS mapping. Assign it before printing."
+msgstr ""
+
 msgid "Preparing print job"
 msgstr "Förbereder utskriftsjobb"
 
@@ -18034,6 +18058,12 @@ msgstr "Symmetrisk ifyllnad kring Y-axeln"
 msgid "If the model has two parts that are symmetric about the Y axis, and you want these parts to have symmetric textures, please click this option on one of the parts."
 msgstr "Om modellen har två delar som är symmetriska kring Y-axeln och du vill att dessa delar ska ha symmetriska texturer, klickar du i det här alternativet på en av delarna."
 
+msgid "Fill pattern tops"
+msgstr ""
+
+msgid "Choose this option if you want to completely fill in the tops of the infill pattern"
+msgstr ""
+
 # AI Translated
 msgid "Infill combination - Max layer height"
 msgstr "Ifyllnadskombination – max lagerhöjd"
@@ -32648,6 +32678,9 @@ msgstr "Aktivera utvecklarverktyg"
 msgid "An error occurred loading %s"
 msgstr "Ett fel uppstod vid inläsning av %s"
 
+msgid "/"
+msgstr "/"
+
 # AI Translated
 #, boost-format
 msgid "Load %1% to %2%"
@@ -34434,9 +34467,6 @@ msgstr ""
 #~ msgid "An error occurred loading "
 #~ msgstr "Ett fel uppstod vid inläsning av "
 
-#~ msgid "/"
-#~ msgstr "/"
-
 # AI Translated
 #, c-format, boost-format
 #~ msgid "Load %s to "
@@ -34646,6 +34676,10 @@ msgstr ""
 #~ msgid "Support/Color Painting: adjust section position"
 #~ msgstr "Support/Färgläggning:justera sektions positionen"
 
+# AI Translated
+#~ msgid "(Experimental) Use printer agents instead of print hosts"
+#~ msgstr "(Experimentellt) Använd skrivaragenter i stället för utskriftsvärdar"
+
 # AI Translated
 #~ msgid "Tab"
 #~ msgstr "Tabb"

localization/i18n/th/OrcaSlicer_th.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-10-05 10:49-0300\n"
+"POT-Creation-Date: 2026-10-06 13:42+0800\n"
 "PO-Revision-Date: 2026-06-19 13:40+0700\n"
 "Last-Translator: Icezaza\n"
 "Language-Team: Thai\n"
@@ -4332,6 +4332,9 @@ msgstr "คุณแน่ใจหรือไม่ว่าต้องกา
 msgid "You need to select the material type and color first."
 msgstr "คุณต้องเลือกประเภทวัสดุและสีก่อน"
 
+msgid "The minimum temperature cannot be greater than the maximum temperature."
+msgstr ""
+
 #, c-format, boost-format
 msgid "Please input a valid value (K in %.1f~%.1f)"
 msgstr "โปรดป้อนค่าที่ถูกต้อง (K อยู่ในช่วง %.1f~%.1f)"
@@ -6192,7 +6195,7 @@ msgid "Size:"
 msgstr "ขนาด:"
 
 # AI Translated
-#, c-format, boost-format
+#, boost-format
 msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)."
 msgstr "พบความขัดแย้งของเส้นทาง G-code ที่เลเยอร์ %d, Z = %.2lfmm โปรดแยกวัตถุที่ขัดแย้งกันให้ไกลออกไป (%s <-> %s)"
 
@@ -7061,6 +7064,22 @@ msgstr "ไฟล์ .gcode.3mf ไม่มีข้อมูล G-code โป
 msgid "File '%s' was lost! Please download it again."
 msgstr "ไฟล์ '%s' สูญหาย! กรุณาดาวน์โหลดอีกครั้ง."
 
+msgid "gcodes"
+msgstr ""
+
+msgid "Failed to delete the file from printer."
+msgstr ""
+
+#, c-format, boost-format
+msgid "Do you want to print the file '%s' from printer?"
+msgstr ""
+
+msgid "Print file"
+msgstr ""
+
+msgid "Failed to start the print job."
+msgstr ""
+
 #, c-format, boost-format
 msgid ""
 "File: %s\n"
@@ -10226,18 +10245,6 @@ msgstr "แสดงค่าที่ตั้งไว้ล่วงหน้
 msgid "Show incompatible/unsupported presets in the printer and filament dropdown lists. These presets cannot be selected."
 msgstr "แสดงค่าที่ตั้งไว้ล่วงหน้าที่ไม่เข้ากันหรือไม่รองรับในรายการเลือกเครื่องพิมพ์และเส้นพลาสติก ไม่สามารถเลือกค่าที่ตั้งไว้ล่วงหน้าเหล่านี้ได้"
 
-# AI Translated
-msgid "(Experimental) Use printer agents instead of print hosts"
-msgstr "(ทดลอง) ใช้เอเจนต์เครื่องพิมพ์แทนโฮสต์การพิมพ์"
-
-# AI Translated
-msgid ""
-"Route print jobs for non-Bambu printers through printer plug-in agents instead of the classic print-host upload flow.\n"
-"When disabled, OrcaSlicer uses the legacy print-host behavior."
-msgstr ""
-"ส่งงานพิมพ์ของเครื่องพิมพ์ที่ไม่ใช่ Bambu ผ่านเอเจนต์ปลั๊กอินของเครื่องพิมพ์ แทนการอัพโหลดไปยังโฮสต์การพิมพ์แบบเดิม\n"
-"เมื่อปิดใช้ OrcaSlicer จะใช้พฤติกรรมโฮสต์การพิมพ์แบบเดิม"
-
 # AI Translated
 msgid "Experimental Features"
 msgstr "ฟีเจอร์ทดลอง"
@@ -10253,6 +10260,17 @@ msgstr ""
 "พยายามคงคุณสมบัติการทาสีไว้ (สี/รอยตะเข็บ/ส่วนรองรับ/ผิวฟัซซี ฯลฯ) หลังจากเปลี่ยนตาข่ายวัตถุ (เช่น ตัด/โหลดซ้ำจากดิสก์/ลดความซับซ้อน/แก้ไข ฯลฯ)\n"
 "น่าทดลองมาก! ช้าและอาจสร้างสิ่งประดิษฐ์"
 
+msgid "Use printer agents instead of print hosts"
+msgstr ""
+
+# AI Translated
+msgid ""
+"Route print jobs for non-Bambu printers through printer plug-in agents instead of the classic print-host upload flow.\n"
+"When disabled, OrcaSlicer uses the legacy print-host behavior."
+msgstr ""
+"ส่งงานพิมพ์ของเครื่องพิมพ์ที่ไม่ใช่ Bambu ผ่านเอเจนต์ปลั๊กอินของเครื่องพิมพ์ แทนการอัพโหลดไปยังโฮสต์การพิมพ์แบบเดิม\n"
+"เมื่อปิดใช้ OrcaSlicer จะใช้พฤติกรรมโฮสต์การพิมพ์แบบเดิม"
+
 msgid "Allow Abnormal Storage"
 msgstr "อนุญาตให้จัดเก็บผิดปกติ"
 
@@ -11063,6 +11081,12 @@ msgstr "ยกเลิกไทม์แลปส์และพิมพ์"
 msgid "Clean Up"
 msgstr "ล้าง"
 
+msgid "AMS filament mapping is not available for this printer. Clear the AMS mapping before printing."
+msgstr ""
+
+msgid "A filament used by this print has no AMS mapping. Assign it before printing."
+msgstr ""
+
 msgid "Preparing print job"
 msgstr "กำลังเตรียมงานพิมพ์"
 
@@ -16247,6 +16271,12 @@ msgstr "แกน Y ไส้ในแบบสมมาตร"
 msgid "If the model has two parts that are symmetric about the Y axis, and you want these parts to have symmetric textures, please click this option on one of the parts."
 msgstr "หากแบบจำลองมีสองส่วนที่สมมาตรเกี่ยวกับแกน Y และคุณต้องการให้ส่วนเหล่านี้มีพื้นผิวที่สมมาตร โปรดคลิกตัวเลือกนี้บนส่วนใดส่วนหนึ่ง"
 
+msgid "Fill pattern tops"
+msgstr ""
+
+msgid "Choose this option if you want to completely fill in the tops of the infill pattern"
+msgstr ""
+
 msgid "Infill combination - Max layer height"
 msgstr "ชุดค่าผสม ไส้ใน - ความสูงของชั้นสูงสุด"
 
@@ -29996,6 +30026,10 @@ msgstr "เปิดใช้งานเครื่องมือนักพ
 msgid "An error occurred loading %s"
 msgstr "เกิดข้อผิดพลาดในการโหลด %s"
 
+# AI Translated
+msgid "/"
+msgstr "/"
+
 # AI Translated
 #, boost-format
 msgid "Load %1% to %2%"
@@ -30675,6 +30709,10 @@ msgstr ""
 "หลีกเลี่ยงการบิดเบี้ยว\n"
 "คุณรู้หรือไม่ว่าเมื่อพิมพ์วัสดุที่มีแนวโน้มที่จะเกิดการบิดเบี้ยว เช่น ABS การเพิ่มอุณหภูมิฐานพิมพ์อย่างเหมาะสมสามารถลดความน่าจะเป็นของการบิดเบี้ยวได้"
 
+# AI Translated
+#~ msgid "(Experimental) Use printer agents instead of print hosts"
+#~ msgstr "(ทดลอง) ใช้เอเจนต์เครื่องพิมพ์แทนโฮสต์การพิมพ์"
+
 #~ msgid "X"
 #~ msgstr "X"
 
@@ -31699,10 +31737,6 @@ msgstr ""
 #~ msgid "An error occurred loading "
 #~ msgstr "เกิดข้อผิดพลาดในการโหลด "
 
-# AI Translated
-#~ msgid "/"
-#~ msgstr "/"
-
 # AI Translated
 #, c-format, boost-format
 #~ msgid "Load %s to "

localization/i18n/tr/OrcaSlicer_tr.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-10-05 10:49-0300\n"
+"POT-Creation-Date: 2026-10-06 13:42+0800\n"
 "PO-Revision-Date: 2026-08-21 23:18+0300\n"
 "Last-Translator: GlauTech\n"
 "Language-Team: \n"
@@ -4384,6 +4384,9 @@ msgstr "Filament bilgisini temizlemek istediğinizden emin misiniz?"
 msgid "You need to select the material type and color first."
 msgstr "Önce malzeme türünü ve rengini seçmeniz gerekir."
 
+msgid "The minimum temperature cannot be greater than the maximum temperature."
+msgstr ""
+
 #, c-format, boost-format
 msgid "Please input a valid value (K in %.1f~%.1f)"
 msgstr "Lütfen geçerli bir değer girin (K %.1f~%.1f içinde)"
@@ -6258,7 +6261,7 @@ msgstr "Hacim:"
 msgid "Size:"
 msgstr "Boyut:"
 
-#, c-format, boost-format
+#, boost-format
 msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)."
 msgstr "%d katmanında G-code yollarında çakışmalar bulundu, Z = %.2lfmm. Lütfen çakışan nesneleri daha uzağa ayırın (%s <-> %s)."
 
@@ -7134,6 +7137,22 @@ msgstr ".gcode.3mf dosyası hiçbir G-code verisi içermiyor. Lütfen dosyayı B
 msgid "File '%s' was lost! Please download it again."
 msgstr "'%s' dosyası kayboldu! Lütfen tekrar indirin."
 
+msgid "gcodes"
+msgstr ""
+
+msgid "Failed to delete the file from printer."
+msgstr ""
+
+#, c-format, boost-format
+msgid "Do you want to print the file '%s' from printer?"
+msgstr ""
+
+msgid "Print file"
+msgstr ""
+
+msgid "Failed to start the print job."
+msgstr ""
+
 #, c-format, boost-format
 msgid ""
 "File: %s\n"
@@ -10358,18 +10377,6 @@ msgstr "Desteklenmeyen ön ayarları göster"
 msgid "Show incompatible/unsupported presets in the printer and filament dropdown lists. These presets cannot be selected."
 msgstr "Yazıcı ve filament açılır listelerinde uyumsuz/desteklenmeyen ön ayarları gösterir. Bu ön ayarlar seçilemez."
 
-# AI Translated
-msgid "(Experimental) Use printer agents instead of print hosts"
-msgstr "(Deneysel) Baskı sunucuları yerine yazıcı aracılarını kullan"
-
-# AI Translated
-msgid ""
-"Route print jobs for non-Bambu printers through printer plug-in agents instead of the classic print-host upload flow.\n"
-"When disabled, OrcaSlicer uses the legacy print-host behavior."
-msgstr ""
-"Bambu olmayan yazıcıların baskı işlerini, klasik baskı sunucusuna yükleme akışı yerine yazıcı eklenti aracıları üzerinden yönlendirir.\n"
-"Devre dışı bırakıldığında OrcaSlicer eski baskı sunucusu davranışını kullanır."
-
 # AI Translated
 msgid "Experimental Features"
 msgstr "Deneysel Özellikler"
@@ -10386,6 +10393,17 @@ msgstr ""
 "Nesne mesh'i değiştikten sonra (kesme/diskten yeniden yükleme/basitleştirme/onarma vb.) boyanmış özellikleri (renk/dikiş/destek/pütür vb.) korumaya çalışır.\n"
 "Oldukça deneyseldir! Yavaştır ve bozulmalara yol açabilir."
 
+msgid "Use printer agents instead of print hosts"
+msgstr ""
+
+# AI Translated
+msgid ""
+"Route print jobs for non-Bambu printers through printer plug-in agents instead of the classic print-host upload flow.\n"
+"When disabled, OrcaSlicer uses the legacy print-host behavior."
+msgstr ""
+"Bambu olmayan yazıcıların baskı işlerini, klasik baskı sunucusuna yükleme akışı yerine yazıcı eklenti aracıları üzerinden yönlendirir.\n"
+"Devre dışı bırakıldığında OrcaSlicer eski baskı sunucusu davranışını kullanır."
+
 msgid "Allow Abnormal Storage"
 msgstr "Anormal Depolamaya İzin Ver"
 
@@ -11199,6 +11217,12 @@ msgstr "Timelapse'i İptal Et ve Yazdır"
 msgid "Clean Up"
 msgstr "Temizle"
 
+msgid "AMS filament mapping is not available for this printer. Clear the AMS mapping before printing."
+msgstr ""
+
+msgid "A filament used by this print has no AMS mapping. Assign it before printing."
+msgstr ""
+
 msgid "Preparing print job"
 msgstr "Yazdırma için hazırlanıyor"
 
@@ -16503,6 +16527,12 @@ msgstr "Simetrik dolgu Y ekseni"
 msgid "If the model has two parts that are symmetric about the Y axis, and you want these parts to have symmetric textures, please click this option on one of the parts."
 msgstr "Modelin Y ekseni etrafında simetrik iki parçası varsa ve bu parçaların simetrik dokulara sahip olmasını istiyorsanız, lütfen parçalardan birinde bu seçeneğe tıklayın."
 
+msgid "Fill pattern tops"
+msgstr ""
+
+msgid "Choose this option if you want to completely fill in the tops of the infill pattern"
+msgstr ""
+
 msgid "Infill combination - Max layer height"
 msgstr "Dolgu kombinasyonu - Maksimum katman yüksekliği"
 
@@ -30445,6 +30475,10 @@ msgstr "Geliştirici Araçlarını Etkinleştir"
 msgid "An error occurred loading %s"
 msgstr "%s yüklenirken bir hata oluştu"
 
+# AI Translated
+msgid "/"
+msgstr "/"
+
 # AI Translated
 #, boost-format
 msgid "Load %1% to %2%"
@@ -32148,10 +32182,6 @@ msgstr ""
 #~ msgid "An error occurred loading "
 #~ msgstr "Yüklenirken bir hata oluştu: "
 
-# AI Translated
-#~ msgid "/"
-#~ msgstr "/"
-
 # AI Translated
 #, c-format, boost-format
 #~ msgid "Load %s to "
@@ -32357,6 +32387,10 @@ msgstr ""
 #~ msgid "Support/Color Painting: adjust section position"
 #~ msgstr "Destek/Renkli Boyama: bölüm konumunu ayarlayın"
 
+# AI Translated
+#~ msgid "(Experimental) Use printer agents instead of print hosts"
+#~ msgstr "(Deneysel) Baskı sunucuları yerine yazıcı aracılarını kullan"
+
 # AI Translated
 #~ msgid "Tab"
 #~ msgstr "Sekme"

localization/i18n/uk/OrcaSlicer_uk.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: orcaslicerua\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-10-05 10:49-0300\n"
+"POT-Creation-Date: 2026-10-06 13:42+0800\n"
 "PO-Revision-Date: 2026-07-17 16:25+0300\n"
 "Last-Translator: Andrij Mizyk <andm1zyk@proton.me>\n"
 "Language-Team: Ukrainian\n"
@@ -4298,6 +4298,9 @@ msgstr "Ви впевнені, що хочете видалити інформа
 msgid "You need to select the material type and color first."
 msgstr "Спочатку потрібно вибрати тип матеріалу та колір."
 
+msgid "The minimum temperature cannot be greater than the maximum temperature."
+msgstr ""
+
 #, c-format, boost-format
 msgid "Please input a valid value (K in %.1f~%.1f)"
 msgstr "Будь ласка введіть коректне значення (K в %.1f~%.1f)"
@@ -6212,7 +6215,7 @@ msgid "Size:"
 msgstr "Розмір:"
 
 # AI Translated
-#, c-format, boost-format
+#, boost-format
 msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)."
 msgstr "Виявлено конфлікти шляхів G-code на шарі %d, Z = %.2lf мм. Будь ласка, рознесіть конфліктуючі обʼєкти далі один від одного (%s <-> %s)."
 
@@ -7103,6 +7106,22 @@ msgstr "Файл .gcode.3mf не містить даних G-code. Будь ла
 msgid "File '%s' was lost! Please download it again."
 msgstr "Файл '%s' втрачений! Завантажте його знову."
 
+msgid "gcodes"
+msgstr ""
+
+msgid "Failed to delete the file from printer."
+msgstr ""
+
+#, c-format, boost-format
+msgid "Do you want to print the file '%s' from printer?"
+msgstr ""
+
+msgid "Print file"
+msgstr ""
+
+msgid "Failed to start the print job."
+msgstr ""
+
 #, c-format, boost-format
 msgid ""
 "File: %s\n"
@@ -10365,18 +10384,6 @@ msgstr "Показати непідтримувані пресети"
 msgid "Show incompatible/unsupported presets in the printer and filament dropdown lists. These presets cannot be selected."
 msgstr "Показати несумісні/непідтримувані пресети у випадаючому списку принтера і філаменту. Ці пресети не можна вибрати."
 
-# AI Translated
-msgid "(Experimental) Use printer agents instead of print hosts"
-msgstr "(Експериментально) Використовувати агентів принтера замість хостів друку"
-
-# AI Translated
-msgid ""
-"Route print jobs for non-Bambu printers through printer plug-in agents instead of the classic print-host upload flow.\n"
-"When disabled, OrcaSlicer uses the legacy print-host behavior."
-msgstr ""
-"Спрямовує завдання друку для принтерів, відмінних від Bambu, через агентів плагінів принтера замість класичного завантаження на хост друку.\n"
-"Коли вимкнено, OrcaSlicer використовує попередню поведінку хоста друку."
-
 msgid "Experimental Features"
 msgstr "Експериментальні функції"
 
@@ -10391,6 +10398,17 @@ msgstr ""
 "Намагатися зберегти намальовані елементи (колір/шов/підтримки/шорсткість тощо) після зміни сітки обʼєкта (наприклад, розрізання/перезавантаження з диска/спрощення/виправлення тощо)\n"
 "Дуже експериментально! Повільно і може створювати артефакти."
 
+msgid "Use printer agents instead of print hosts"
+msgstr ""
+
+# AI Translated
+msgid ""
+"Route print jobs for non-Bambu printers through printer plug-in agents instead of the classic print-host upload flow.\n"
+"When disabled, OrcaSlicer uses the legacy print-host behavior."
+msgstr ""
+"Спрямовує завдання друку для принтерів, відмінних від Bambu, через агентів плагінів принтера замість класичного завантаження на хост друку.\n"
+"Коли вимкнено, OrcaSlicer використовує попередню поведінку хоста друку."
+
 msgid "Allow Abnormal Storage"
 msgstr "Дозволити незвичне сховище"
 
@@ -11216,6 +11234,12 @@ msgstr "Скасувати таймлапс і друкувати"
 msgid "Clean Up"
 msgstr "Очистити"
 
+msgid "AMS filament mapping is not available for this printer. Clear the AMS mapping before printing."
+msgstr ""
+
+msgid "A filament used by this print has no AMS mapping. Assign it before printing."
+msgstr ""
+
 msgid "Preparing print job"
 msgstr "Підготовка завдання для друку"
 
@@ -16656,6 +16680,12 @@ msgstr "Симетричне заповнення по осі Y"
 msgid "If the model has two parts that are symmetric about the Y axis, and you want these parts to have symmetric textures, please click this option on one of the parts."
 msgstr "Якщо модель має дві частини, симетричні відносно осі Y, і ви хочете, щоб ці частини мали симетричні текстури, увімкніть цю опцію на одній із частин."
 
+msgid "Fill pattern tops"
+msgstr ""
+
+msgid "Choose this option if you want to completely fill in the tops of the infill pattern"
+msgstr ""
+
 msgid "Infill combination - Max layer height"
 msgstr "Комбінація заповнення - Максимальна висота шару"
 
@@ -30612,6 +30642,9 @@ msgstr "Увімкнути інструменти розробника"
 msgid "An error occurred loading %s"
 msgstr "Помилка під час завантаження %s"
 
+msgid "/"
+msgstr "/"
+
 # AI Translated
 #, boost-format
 msgid "Load %1% to %2%"
@@ -31296,6 +31329,10 @@ msgstr ""
 "Уникнення деформації\n"
 "Чи знаєте ви, що при друку матеріалами, схильними до деформації, такими як ABS, відповідне підвищення температури столу може зменшити ймовірність деформації?"
 
+# AI Translated
+#~ msgid "(Experimental) Use printer agents instead of print hosts"
+#~ msgstr "(Експериментально) Використовувати агентів принтера замість хостів друку"
+
 #~ msgid "X"
 #~ msgstr "X"
 
@@ -32342,9 +32379,6 @@ msgstr ""
 #~ msgid "An error occurred loading "
 #~ msgstr "Помилка під час завантаження "
 
-#~ msgid "/"
-#~ msgstr "/"
-
 # AI Translated
 #, c-format, boost-format
 #~ msgid "Load %s to "

localization/i18n/vi/OrcaSlicer_vi.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-10-05 10:49-0300\n"
+"POT-Creation-Date: 2026-10-06 13:42+0800\n"
 "PO-Revision-Date: 2025-10-02 17:43+0700\n"
 "Last-Translator: \n"
 "Language-Team: hainguyen.ts13@gmail.com\n"
@@ -4558,6 +4558,9 @@ msgstr "Bạn có chắc muốn xóa thông tin filament?"
 msgid "You need to select the material type and color first."
 msgstr "Bạn cần chọn loại vật liệu và màu trước."
 
+msgid "The minimum temperature cannot be greater than the maximum temperature."
+msgstr ""
+
 #, c-format, boost-format
 msgid "Please input a valid value (K in %.1f~%.1f)"
 msgstr "Vui lòng nhập giá trị hợp lệ (K trong %.1f~%.1f)"
@@ -6565,7 +6568,7 @@ msgstr "Thể tích:"
 msgid "Size:"
 msgstr "Kích thước:"
 
-#, c-format, boost-format
+#, boost-format
 msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)."
 msgstr "Đã tìm thấy xung đột đường đi G-code tại lớp %d, Z = %.2lfmm. Vui lòng tách các vật thể xung đột ra xa hơn (%s <-> %s)."
 
@@ -7469,6 +7472,22 @@ msgstr "File .gcode.3mf không chứa dữ liệu G-code. Vui lòng slice với
 msgid "File '%s' was lost! Please download it again."
 msgstr "File '%s' đã bị mất! Vui lòng tải lại."
 
+msgid "gcodes"
+msgstr ""
+
+msgid "Failed to delete the file from printer."
+msgstr ""
+
+#, c-format, boost-format
+msgid "Do you want to print the file '%s' from printer?"
+msgstr ""
+
+msgid "Print file"
+msgstr ""
+
+msgid "Failed to start the print job."
+msgstr ""
+
 #, c-format, boost-format
 msgid ""
 "File: %s\n"
@@ -10876,18 +10895,6 @@ msgstr "Hiện cài đặt sẵn không được hỗ trợ"
 msgid "Show incompatible/unsupported presets in the printer and filament dropdown lists. These presets cannot be selected."
 msgstr "Hiện các cài đặt sẵn không tương thích/không được hỗ trợ trong danh sách thả xuống máy in và filament. Không thể chọn các cài đặt sẵn này."
 
-# AI Translated
-msgid "(Experimental) Use printer agents instead of print hosts"
-msgstr "(Thử nghiệm) Dùng tác nhân máy in thay cho máy chủ in"
-
-# AI Translated
-msgid ""
-"Route print jobs for non-Bambu printers through printer plug-in agents instead of the classic print-host upload flow.\n"
-"When disabled, OrcaSlicer uses the legacy print-host behavior."
-msgstr ""
-"Định tuyến các tác vụ in của máy in không phải Bambu qua các tác nhân plugin máy in thay vì luồng tải lên máy chủ in cổ điển.\n"
-"Khi tắt, OrcaSlicer sẽ dùng hành vi máy chủ in cũ."
-
 # AI Translated
 msgid "Experimental Features"
 msgstr "Tính năng thử nghiệm"
@@ -10904,6 +10911,17 @@ msgstr ""
 "Cố gắng giữ lại các phần đã tô (màu/đường nối/support/fuzzy v.v.) sau khi thay đổi lưới của vật thể (như cắt/tải lại từ đĩa/đơn giản hóa/sửa v.v.)\n"
 "Rất thử nghiệm! Chậm và có thể tạo ra khuyết điểm."
 
+msgid "Use printer agents instead of print hosts"
+msgstr ""
+
+# AI Translated
+msgid ""
+"Route print jobs for non-Bambu printers through printer plug-in agents instead of the classic print-host upload flow.\n"
+"When disabled, OrcaSlicer uses the legacy print-host behavior."
+msgstr ""
+"Định tuyến các tác vụ in của máy in không phải Bambu qua các tác nhân plugin máy in thay vì luồng tải lên máy chủ in cổ điển.\n"
+"Khi tắt, OrcaSlicer sẽ dùng hành vi máy chủ in cũ."
+
 # AI Translated
 msgid "Allow Abnormal Storage"
 msgstr "Cho phép Bộ nhớ bất thường"
@@ -11742,6 +11760,12 @@ msgstr "Hủy timelapse & In"
 msgid "Clean Up"
 msgstr "Dọn dẹp"
 
+msgid "AMS filament mapping is not available for this printer. Clear the AMS mapping before printing."
+msgstr ""
+
+msgid "A filament used by this print has no AMS mapping. Assign it before printing."
+msgstr ""
+
 msgid "Preparing print job"
 msgstr "Đang chuẩn bị công việc in"
 
@@ -17202,6 +17226,12 @@ msgstr "Infill đối xứng trục Y"
 msgid "If the model has two parts that are symmetric about the Y axis, and you want these parts to have symmetric textures, please click this option on one of the parts."
 msgstr "Nếu model có hai phần đối xứng về trục Y, và bạn muốn các phần này có kết cấu đối xứng, vui lòng nhấp tùy chọn này trên một trong các phần."
 
+msgid "Fill pattern tops"
+msgstr ""
+
+msgid "Choose this option if you want to completely fill in the tops of the infill pattern"
+msgstr ""
+
 msgid "Infill combination - Max layer height"
 msgstr "Kết hợp infill - Chiều cao lớp tối đa"
 
@@ -31285,6 +31315,10 @@ msgstr "Bật công cụ nhà phát triển"
 msgid "An error occurred loading %s"
 msgstr "Đã xảy ra lỗi khi tải %s"
 
+# AI Translated
+msgid "/"
+msgstr "/"
+
 # AI Translated
 #, boost-format
 msgid "Load %1% to %2%"
@@ -33022,10 +33056,6 @@ msgstr ""
 #~ msgid "An error occurred loading "
 #~ msgstr "Đã xảy ra lỗi khi tải "
 
-# AI Translated
-#~ msgid "/"
-#~ msgstr "/"
-
 # AI Translated
 #, c-format, boost-format
 #~ msgid "Load %s to "
@@ -33232,6 +33262,10 @@ msgstr ""
 #~ msgid "Support/Color Painting: adjust section position"
 #~ msgstr "Tô support/màu: điều chỉnh vị trí phần"
 
+# AI Translated
+#~ msgid "(Experimental) Use printer agents instead of print hosts"
+#~ msgstr "(Thử nghiệm) Dùng tác nhân máy in thay cho máy chủ in"
+
 # AI Translated
 #~ msgid "Tab"
 #~ msgstr "Tab"

localization/i18n/zh_CN/OrcaSlicer_zh_CN.po

@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Slic3rPE\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-10-05 10:49-0300\n"
+"POT-Creation-Date: 2026-10-06 13:42+0800\n"
 "PO-Revision-Date: 2026-06-11 12:37-0300\n"
 "Last-Translator: Handle <mail@bysb.net>\n"
 "Language-Team: \n"
@@ -4185,6 +4185,9 @@ msgstr "您确定要清除耗材丝信息吗？"
 msgid "You need to select the material type and color first."
 msgstr "您需要先选择材料类型和颜色。"
 
+msgid "The minimum temperature cannot be greater than the maximum temperature."
+msgstr ""
+
 #, c-format, boost-format
 msgid "Please input a valid value (K in %.1f~%.1f)"
 msgstr "请输入有效的数值（K的范围为%.1f~%.1f）"
@@ -6042,7 +6045,7 @@ msgstr "体积："
 msgid "Size:"
 msgstr "尺寸："
 
-#, c-format, boost-format
+#, boost-format
 msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)."
 msgstr "发现G-code路径在层%d，高度为%.2lf mm处有冲突。请将有冲突的对象分离得更远(%s <-> %s)。"
 
@@ -6906,6 +6909,22 @@ msgstr ".gcode.3mf文件中不包含G-code数据。请使用Orca Slicer进行切
 msgid "File '%s' was lost! Please download it again."
 msgstr "文件%s丢失，请重新下载。"
 
+msgid "gcodes"
+msgstr ""
+
+msgid "Failed to delete the file from printer."
+msgstr ""
+
+#, c-format, boost-format
+msgid "Do you want to print the file '%s' from printer?"
+msgstr ""
+
+msgid "Print file"
+msgstr ""
+
+msgid "Failed to start the print job."
+msgstr ""
+
 #, c-format, boost-format
 msgid ""
 "File: %s\n"
@@ -10037,18 +10056,6 @@ msgstr "显示不受支持的预设"
 msgid "Show incompatible/unsupported presets in the printer and filament dropdown lists. These presets cannot be selected."
 msgstr "在打印机和耗材下拉列表中显示不兼容/不受支持的预设。这些预设无法被选择。"
 
-# AI Translated
-msgid "(Experimental) Use printer agents instead of print hosts"
-msgstr "（实验性）使用打印机代理替代打印主机"
-
-# AI Translated
-msgid ""
-"Route print jobs for non-Bambu printers through printer plug-in agents instead of the classic print-host upload flow.\n"
-"When disabled, OrcaSlicer uses the legacy print-host behavior."
-msgstr ""
-"非 Bambu 打印机的打印任务将通过打印机插件代理发送，而不是经典的打印主机上传流程。\n"
-"禁用时，OrcaSlicer 使用旧的打印主机行为。"
-
 # AI Translated
 msgid "Experimental Features"
 msgstr "实验性功能"
@@ -10064,6 +10071,17 @@ msgstr ""
 "在更改对象网格（如切割/从磁盘重新加载/简化/修复等）后，尝试保留绘制的特征（颜色/接缝/支撑/绒毛等）。\n"
 "高度实验性！速度较慢且可能产生瑕疵。"
 
+msgid "Use printer agents instead of print hosts"
+msgstr ""
+
+# AI Translated
+msgid ""
+"Route print jobs for non-Bambu printers through printer plug-in agents instead of the classic print-host upload flow.\n"
+"When disabled, OrcaSlicer uses the legacy print-host behavior."
+msgstr ""
+"非 Bambu 打印机的打印任务将通过打印机插件代理发送，而不是经典的打印主机上传流程。\n"
+"禁用时，OrcaSlicer 使用旧的打印主机行为。"
+
 msgid "Allow Abnormal Storage"
 msgstr "允许异常存储"
 
@@ -10851,6 +10869,12 @@ msgstr "取消延时摄影，继续打印"
 msgid "Clean Up"
 msgstr "清理"
 
+msgid "AMS filament mapping is not available for this printer. Clear the AMS mapping before printing."
+msgstr ""
+
+msgid "A filament used by this print has no AMS mapping. Assign it before printing."
+msgstr ""
+
 msgid "Preparing print job"
 msgstr "正在准备打印任务"
 
@@ -15985,6 +16009,12 @@ msgstr "对称填充Y轴"
 msgid "If the model has two parts that are symmetric about the Y axis, and you want these parts to have symmetric textures, please click this option on one of the parts."
 msgstr "若模型有两个在Y轴上对称的部分，并且您想对其使用对称的纹理，就请在对应的模型部分上应用此设置。"
 
+msgid "Fill pattern tops"
+msgstr ""
+
+msgid "Choose this option if you want to completely fill in the tops of the infill pattern"
+msgstr ""
+
 msgid "Infill combination - Max layer height"
 msgstr "填充组合 - 最大层高"
 
@@ -29724,6 +29754,10 @@ msgstr "启用开发者工具"
 msgid "An error occurred loading %s"
 msgstr "加载 %s 时出错"
 
+# AI Translated
+msgid "/"
+msgstr "/"
+
 # AI Translated
 #, boost-format
 msgid "Load %1% to %2%"
@@ -30403,6 +30437,10 @@ msgstr ""
 "避免翘曲\n"
 "您知道吗？打印ABS这类易翘曲材料时，适当提高热床温度可以降低翘曲的概率。"
 
+# AI Translated
+#~ msgid "(Experimental) Use printer agents instead of print hosts"
+#~ msgstr "（实验性）使用打印机代理替代打印主机"
+
 #~ msgid "X"
 #~ msgstr "X"
 
@@ -31422,10 +31460,6 @@ msgstr ""
 #~ msgid "An error occurred loading "
 #~ msgstr "加载时出错： "
 
-# AI Translated
-#~ msgid "/"
-#~ msgstr "/"
-
 # AI Translated
 #, c-format, boost-format
 #~ msgid "Load %s to "

localization/i18n/zh_TW/OrcaSlicer_zh_TW.po

@@ -9,7 +9,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-10-05 10:49-0300\n"
+"POT-Creation-Date: 2026-10-06 13:42+0800\n"
 "PO-Revision-Date: 2025-11-28 13:48-0600\n"
 "Last-Translator: tntchn <15895303+tntchn@users.noreply.github.com>\n"
 "Language-Team: \n"
@@ -4290,6 +4290,9 @@ msgstr "您確認要清除線材資訊嗎？"
 msgid "You need to select the material type and color first."
 msgstr "您需要先選擇線材類型和顏色。"
 
+msgid "The minimum temperature cannot be greater than the maximum temperature."
+msgstr ""
+
 #, c-format, boost-format
 msgid "Please input a valid value (K in %.1f~%.1f)"
 msgstr "請輸入有效的數值 (K於 %.1f~%.1f 之間)"
@@ -6172,7 +6175,7 @@ msgstr "體積："
 msgid "Size:"
 msgstr "尺寸："
 
-#, c-format, boost-format
+#, boost-format
 msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)."
 msgstr "發現 G-code 路徑在 %d 層，Z = %.2lf mm 處的衝突。請將有衝突的物件分離得更遠（%s <-> %s）。"
 
@@ -7041,6 +7044,22 @@ msgstr ".gcode.3mf 檔案不包含 G-code 資料。請使用 OrcaSlicer 切片
 msgid "File '%s' was lost! Please download it again."
 msgstr "檔案 %s 遺失，請重新下載。"
 
+msgid "gcodes"
+msgstr ""
+
+msgid "Failed to delete the file from printer."
+msgstr ""
+
+#, c-format, boost-format
+msgid "Do you want to print the file '%s' from printer?"
+msgstr ""
+
+msgid "Print file"
+msgstr ""
+
+msgid "Failed to start the print job."
+msgstr ""
+
 #, c-format, boost-format
 msgid ""
 "File: %s\n"
@@ -10212,18 +10231,6 @@ msgstr "顯示不支援的預設"
 msgid "Show incompatible/unsupported presets in the printer and filament dropdown lists. These presets cannot be selected."
 msgstr "在列印裝置和線材下拉選單中顯示不相容/不支援的預設。這些預設無法選取。"
 
-# AI Translated
-msgid "(Experimental) Use printer agents instead of print hosts"
-msgstr "（實驗性）使用列印裝置代理程式取代列印主機"
-
-# AI Translated
-msgid ""
-"Route print jobs for non-Bambu printers through printer plug-in agents instead of the classic print-host upload flow.\n"
-"When disabled, OrcaSlicer uses the legacy print-host behavior."
-msgstr ""
-"將非 Bambu 列印裝置的列印工作透過列印裝置外掛代理程式傳送，而非傳統的列印主機上傳流程。\n"
-"停用時，OrcaSlicer 會使用舊有的列印主機行為。"
-
 # AI Translated
 msgid "Experimental Features"
 msgstr "實驗性功能"
@@ -10239,6 +10246,17 @@ msgstr ""
 "嘗試在變更物件網格（例如切割/從磁碟重新載入/簡化/修復等）後，保留已繪製的特徵（顏色/Z 縫/支撐/絨毛等）。\n"
 "高度實驗性！速度緩慢且可能產生瑕疵。"
 
+msgid "Use printer agents instead of print hosts"
+msgstr ""
+
+# AI Translated
+msgid ""
+"Route print jobs for non-Bambu printers through printer plug-in agents instead of the classic print-host upload flow.\n"
+"When disabled, OrcaSlicer uses the legacy print-host behavior."
+msgstr ""
+"將非 Bambu 列印裝置的列印工作透過列印裝置外掛代理程式傳送，而非傳統的列印主機上傳流程。\n"
+"停用時，OrcaSlicer 會使用舊有的列印主機行為。"
+
 msgid "Allow Abnormal Storage"
 msgstr "允許異常儲存空間"
 
@@ -11049,6 +11067,12 @@ msgstr "取消縮時攝影並列印"
 msgid "Clean Up"
 msgstr "清理"
 
+msgid "AMS filament mapping is not available for this printer. Clear the AMS mapping before printing."
+msgstr ""
+
+msgid "A filament used by this print has no AMS mapping. Assign it before printing."
+msgstr ""
+
 msgid "Preparing print job"
 msgstr "正在準備列印作業"
 
@@ -16191,6 +16215,12 @@ msgstr "對稱填充Y軸"
 msgid "If the model has two parts that are symmetric about the Y axis, and you want these parts to have symmetric textures, please click this option on one of the parts."
 msgstr "若模型有兩個在Y軸上對稱的部分，並且您想對其使用對稱的紋理，就請在對應的模型部分上應用此設定。"
 
+msgid "Fill pattern tops"
+msgstr ""
+
+msgid "Choose this option if you want to completely fill in the tops of the infill pattern"
+msgstr ""
+
 msgid "Infill combination - Max layer height"
 msgstr "合併填充 - 最大層高"
 
@@ -29917,6 +29947,10 @@ msgstr "啟用開發者工具"
 msgid "An error occurred loading %s"
 msgstr "載入 %s 時發生錯誤"
 
+# AI Translated
+msgid "/"
+msgstr "/"
+
 # AI Translated
 #, boost-format
 msgid "Load %1% to %2%"
@@ -30617,6 +30651,10 @@ msgstr ""
 "避免翹曲\n"
 "您知道嗎？當列印容易翹曲的材料（如 ABS）時，適當提高熱床溫度可以降低翹曲的機率。"
 
+# AI Translated
+#~ msgid "(Experimental) Use printer agents instead of print hosts"
+#~ msgstr "（實驗性）使用列印裝置代理程式取代列印主機"
+
 #~ msgid "X"
 #~ msgstr "X"
 
@@ -31637,10 +31675,6 @@ msgstr ""
 #~ msgid "An error occurred loading "
 #~ msgstr "載入時發生錯誤： "
 
-# AI Translated
-#~ msgid "/"
-#~ msgstr "/"
-
 # AI Translated
 #, c-format, boost-format
 #~ msgid "Load %s to "

resources/images/design_bed.svg

@@ -1 +0,0 @@
-<svg xmlns="http://www.w3.org/2000/svg" width="24" height="24" viewBox="0 0 24 24" fill="none" stroke="#949494" stroke-width="0.85" stroke-linecap="round" stroke-linejoin="round"><path d="M2 9 14 9 22 15 10 15Z"/><path d="M2 9V11L10 17H22V15M10 15V17"/><path d="M6 9 14 15M10 9 18 15M6 12H18"/></svg>

resources/images/design_export.svg

@@ -1 +0,0 @@
-<svg xmlns="http://www.w3.org/2000/svg" width="24" height="24" viewBox="0 0 24 24" fill="none" stroke="#949494" stroke-width="0.85" stroke-linecap="round" stroke-linejoin="round"><path d="M3.15 19.57V4.43A1.28 1.28 0 0 1 4.43 3.15H17.05L20.85 6.95V19.57A1.28 1.28 0 0 1 19.57 20.85H4.43A1.28 1.28 0 0 1 3.15 19.57ZM8.2 3.15V5.68A1.28 1.28 0 0 0 9.48 6.95H14.52A1.28 1.28 0 0 0 15.8 5.68V3.15M17.05 20.85V15.8A1.28 1.28 0 0 0 15.8 14.53H8.2A1.28 1.28 0 0 0 6.95 15.8V20.85"/></svg>

resources/images/design_import_mesh.svg

@@ -1 +0,0 @@
-<svg xmlns="http://www.w3.org/2000/svg" width="24" height="24" viewBox="0 0 24 24"><path d="M8.08,10.74 8.08,5.4M8.08,10.74 15.55,4.87M17.15,10.2 15.55,4.87M4.88,8.6 8.62,20.87M17.15,10.2 20.89,16.07M8.08,10.74 12.78,15.54 17.15,10.2M17.15,19.8 12.78,15.54 8.62,20.87M4.88,8.6 8.08,10.74 17.15,10.2 19.82,7M8.08,10.74 8.62,20.87M17.15,10.2 17.15,19.8" fill="none" stroke="#949494" stroke-width="0.6" stroke-linecap="round" stroke-linejoin="round"/><polygon points="4.88,8.6 8.08,5.4 15.55,4.87 19.82,7 20.89,16.07 17.15,19.8 8.62,20.87 4.35,17.14" fill="none" stroke="#949494" stroke-width="0.85" stroke-linejoin="round"/><polygon points="2.84,4.68 7.32,4.68 7.32,2.84 11.29,5.86 7.32,8.88 7.32,7.04 2.84,7.04" style="fill:#009688;stroke:#009688;stroke-width:0.4;stroke-linejoin:round"/></svg>

resources/images/design_new.svg

@@ -1 +0,0 @@
-<svg xmlns="http://www.w3.org/2000/svg" width="24" height="24" viewBox="0 0 24 24" fill="none" stroke="#949494" stroke-width="0.85" stroke-linecap="round" stroke-linejoin="round"><rect x="3.15" y="3.15" width="17.7" height="17.7" rx="1.28"/><path d="M7.6 12H16.4M12 7.6V16.4"/></svg>

resources/images/design_new_sketch.svg

@@ -1 +0,0 @@
-<svg xmlns="http://www.w3.org/2000/svg" width="24" height="24" viewBox="0 0 24 24" fill="none" stroke="#949494" stroke-width="0.85" stroke-linecap="round" stroke-linejoin="round"><path d="M5.88 3.88H17.16M3.88 5.88V17.16M19.16 5.88V12.38M5.88 19.16H12.38M9.85 7.85H13.2M7.85 9.85V13.2M14.92 9.85A7.35 7.35 0 0 1 9.85 14.92"/><path d="M2.83 2.83h2.1v2.1h-2.1zM18.11 2.83h2.1v2.1h-2.1zM2.83 18.11h2.1v2.1h-2.1zM6.8 6.8h2.1v2.1h-2.1zM14.15 6.8h2.1v2.1h-2.1zM6.8 14.15h2.1v2.1h-2.1z" fill="#949494" stroke="none"/><polygon points="16.01,13.19 18.3,13.19 18.3,16.01 21.12,16.01 21.12,18.3 18.3,18.3 18.3,21.12 16.01,21.12 16.01,18.3 13.19,18.3 13.19,16.01 16.01,16.01" style="fill:#009688;stroke:#009688;stroke-width:0.4;stroke-linejoin:round"/></svg>

resources/images/design_step.svg

@@ -1 +1 @@
-<svg xmlns="http://www.w3.org/2000/svg" width="24" height="24" viewBox="0 1.5 23 23"><path d="M3.0 9.0 L16.0 9.0 L16.0 21.0 L3.0 21.0 ZM3.0 9.0 L7.0 5.0 L20.0 5.0 L16.0 9.0M20.0 5.0 L20.0 17.0 L16.0 21.0" fill="none" stroke="#949494" stroke-width="0.85" stroke-linecap="round" stroke-linejoin="round"/><path d="M6.168410256410256 13.423897435897436V13.868410256410256Q5.908923076923077 13.744307692307691 5.678769230769231 13.683384615384615Q5.448615384615385 13.622461538461538 5.23425641025641 13.622461538461538Q4.861948717948718 13.622461538461538 4.66 13.766871794871793Q4.458051282051283 13.91128205128205 4.458051282051283 14.177538461538461Q4.458051282051283 14.400923076923076 4.592307692307693 14.514871794871794Q4.726564102564103 14.628820512820512 5.101128205128205 14.69876923076923L5.3764102564102565 14.755179487179486Q5.886358974358975 14.852205128205128 6.128923076923078 15.09702564102564Q6.37148717948718 15.341846153846152 6.37148717948718 15.75251282051282Q6.37148717948718 16.242153846153844 6.043179487179488 16.49487179487179Q5.7148717948717955 16.747589743589742 5.080820512820513 16.747589743589742Q4.841641025641026 16.747589743589742 4.572000000000001 16.693435897435897Q4.302358974358975 16.639282051282052 4.013538461538462 16.53323076923077V16.063897435897434Q4.291076923076924 16.219589743589744 4.557333333333334 16.2985641025641Q4.823589743589745 16.37753846153846 5.080820512820513 16.37753846153846Q5.471179487179487 16.37753846153846 5.683282051282052 16.224102564102562Q5.895384615384616 16.070666666666664 5.895384615384616 15.786358974358974Q5.895384615384616 15.538153846153845 5.743076923076924 15.398256410256408Q5.590769230769231 15.258358974358973 5.243282051282051 15.188410256410256L4.965743589743591 15.134256410256409Q4.455794871794872 15.032717948717949 4.227897435897436 14.816102564102565Q4.000000000000001 14.599487179487179 4.000000000000001 14.213641025641024Q4.000000000000001 13.766871794871793 4.314769230769231 13.509641025641024Q4.629538461538462 13.252410256410256 5.182358974358975 13.252410256410256Q5.419282051282051 13.252410256410256 5.665230769230769 13.29528205128205Q5.911179487179488 13.338153846153846 6.168410256410256 13.423897435897436ZM6.615179487179487 13.313333333333333H9.46502564102564V13.696923076923076H8.269128205128204V16.682153846153845H7.811076923076923V13.696923076923076H6.615179487179487ZM9.905025641025642 13.313333333333333H12.035076923076925V13.696923076923076H10.360820512820514V14.69425641025641H11.965128205128206V15.077846153846153H10.360820512820514V16.2985641025641H12.075692307692309V16.682153846153845H9.905025641025642ZM13.280615384615384 13.687897435897435V14.953743589743588H13.85374358974359Q14.171897435897435 14.953743589743588 14.345641025641026 14.78902564102564Q14.519384615384615 14.624307692307692 14.519384615384615 14.319692307692307Q14.519384615384615 14.017333333333333 14.345641025641026 13.852615384615383Q14.171897435897435 13.687897435897435 13.85374358974359 13.687897435897435ZM12.824820512820512 13.313333333333333H13.85374358974359Q14.420102564102564 13.313333333333333 14.710051282051282 13.569435897435897Q15.0 13.82553846153846 15.0 14.319692307692307Q15.0 14.818358974358974 14.710051282051282 15.073333333333332Q14.420102564102564 15.32830769230769 13.85374358974359 15.32830769230769H13.280615384615384V16.682153846153845H12.824820512820512Z" fill="#949494" stroke="none"/><polygon points="2.72,5.99 7.02,5.99 7.02,4.22 10.82,7.12 7.02,10.01 7.02,8.25 2.72,8.25" style="fill:#009688;stroke:#009688;stroke-width:0.38;stroke-linejoin:round"/></svg>
+<svg xmlns="http://www.w3.org/2000/svg" width="24" height="24" viewBox="0 0 24 24"><path d="M3.0 9.0 L16.0 9.0 L16.0 21.0 L3.0 21.0 ZM3.0 9.0 L7.0 5.0 L20.0 5.0 L16.0 9.0M20.0 5.0 L20.0 17.0 L16.0 21.0" fill="none" stroke="#949494" stroke-width="0.85" stroke-linecap="round" stroke-linejoin="round"/><path d="M6.168410256410256 13.423897435897436V13.868410256410256Q5.908923076923077 13.744307692307691 5.678769230769231 13.683384615384615Q5.448615384615385 13.622461538461538 5.23425641025641 13.622461538461538Q4.861948717948718 13.622461538461538 4.66 13.766871794871793Q4.458051282051283 13.91128205128205 4.458051282051283 14.177538461538461Q4.458051282051283 14.400923076923076 4.592307692307693 14.514871794871794Q4.726564102564103 14.628820512820512 5.101128205128205 14.69876923076923L5.3764102564102565 14.755179487179486Q5.886358974358975 14.852205128205128 6.128923076923078 15.09702564102564Q6.37148717948718 15.341846153846152 6.37148717948718 15.75251282051282Q6.37148717948718 16.242153846153844 6.043179487179488 16.49487179487179Q5.7148717948717955 16.747589743589742 5.080820512820513 16.747589743589742Q4.841641025641026 16.747589743589742 4.572000000000001 16.693435897435897Q4.302358974358975 16.639282051282052 4.013538461538462 16.53323076923077V16.063897435897434Q4.291076923076924 16.219589743589744 4.557333333333334 16.2985641025641Q4.823589743589745 16.37753846153846 5.080820512820513 16.37753846153846Q5.471179487179487 16.37753846153846 5.683282051282052 16.224102564102562Q5.895384615384616 16.070666666666664 5.895384615384616 15.786358974358974Q5.895384615384616 15.538153846153845 5.743076923076924 15.398256410256408Q5.590769230769231 15.258358974358973 5.243282051282051 15.188410256410256L4.965743589743591 15.134256410256409Q4.455794871794872 15.032717948717949 4.227897435897436 14.816102564102565Q4.000000000000001 14.599487179487179 4.000000000000001 14.213641025641024Q4.000000000000001 13.766871794871793 4.314769230769231 13.509641025641024Q4.629538461538462 13.252410256410256 5.182358974358975 13.252410256410256Q5.419282051282051 13.252410256410256 5.665230769230769 13.29528205128205Q5.911179487179488 13.338153846153846 6.168410256410256 13.423897435897436ZM6.615179487179487 13.313333333333333H9.46502564102564V13.696923076923076H8.269128205128204V16.682153846153845H7.811076923076923V13.696923076923076H6.615179487179487ZM9.905025641025642 13.313333333333333H12.035076923076925V13.696923076923076H10.360820512820514V14.69425641025641H11.965128205128206V15.077846153846153H10.360820512820514V16.2985641025641H12.075692307692309V16.682153846153845H9.905025641025642ZM13.280615384615384 13.687897435897435V14.953743589743588H13.85374358974359Q14.171897435897435 14.953743589743588 14.345641025641026 14.78902564102564Q14.519384615384615 14.624307692307692 14.519384615384615 14.319692307692307Q14.519384615384615 14.017333333333333 14.345641025641026 13.852615384615383Q14.171897435897435 13.687897435897435 13.85374358974359 13.687897435897435ZM12.824820512820512 13.313333333333333H13.85374358974359Q14.420102564102564 13.313333333333333 14.710051282051282 13.569435897435897Q15.0 13.82553846153846 15.0 14.319692307692307Q15.0 14.818358974358974 14.710051282051282 15.073333333333332Q14.420102564102564 15.32830769230769 13.85374358974359 15.32830769230769H13.280615384615384V16.682153846153845H12.824820512820512Z" fill="#949494" stroke="none"/></svg>

resources/images/design_zoom.svg

@@ -1 +0,0 @@
-<svg xmlns="http://www.w3.org/2000/svg" width="24" height="24" viewBox="0 0 24 24" fill="none" stroke="#949494" stroke-width="0.85" stroke-linecap="round" stroke-linejoin="round"><circle cx="10" cy="10" r="7"/><path d="M6 10a4 4 0 0 1 4-4M15 15 21.5 21.5"/></svg>

resources/profiles/Prusa.json

@@ -1,6 +1,6 @@
 {
 	"name": "Prusa",
-	"version": "02.04.00.16",
+	"version": "02.04.00.15",
 	"force_update": "0",
 	"description": "Prusa configurations",
 	"machine_model_list": [
@@ -1573,32 +1573,48 @@
 	],
 	"filament_list": [
 		{
-			"name": "Generic PC @Prusa",
-			"sub_path": "filament/Generic PC @Prusa.json"
+			"name": "Generic ASA @Prusa CORE One",
+			"sub_path": "filament/Generic ASA @Prusa CORE One.json"
+		},
+		{
+			"name": "Generic PLA Silk @Prusa CORE One",
+			"sub_path": "filament/Generic PLA Silk @Prusa CORE One.json"
 		},
 		{
 			"name": "fdm_filament_common",
 			"sub_path": "filament/fdm_filament_common.json"
 		},
 		{
-			"name": "fdm_filament_template_indx",
-			"sub_path": "filament/fdm_filament_template_indx.json"
+			"name": "Generic ASA @Prusa CORE One 0.6",
+			"sub_path": "filament/Generic ASA @Prusa CORE One 0.6.json"
 		},
 		{
-			"name": "fdm_filament_template_nextruder_pet",
-			"sub_path": "filament/fdm_filament_template_nextruder_pet.json"
+			"name": "Generic ASA @Prusa CORE One 0.8",
+			"sub_path": "filament/Generic ASA @Prusa CORE One 0.8.json"
 		},
 		{
-			"name": "fdm_filament_template_nextruder_pet_hf",
-			"sub_path": "filament/fdm_filament_template_nextruder_pet_hf.json"
+			"name": "Generic ASA @Prusa CORE One HF 0.4",
+			"sub_path": "filament/Generic ASA @Prusa CORE One HF 0.4.json"
 		},
 		{
-			"name": "fdm_filament_template_nextruder_pla",
-			"sub_path": "filament/fdm_filament_template_nextruder_pla.json"
+			"name": "Generic ASA @Prusa CORE One HF 0.5",
+			"sub_path": "filament/Generic ASA @Prusa CORE One HF 0.5.json"
 		},
 		{
-			"name": "fdm_filament_template_nextruder_pla_hf",
-			"sub_path": "filament/fdm_filament_template_nextruder_pla_hf.json"
+			"name": "Generic ASA @Prusa CORE One HF 0.6",
+			"sub_path": "filament/Generic ASA @Prusa CORE One HF 0.6.json"
+		},
+		{
+			"name": "Generic ASA @Prusa CORE One HF 0.8",
+			"sub_path": "filament/Generic ASA @Prusa CORE One HF 0.8.json"
+		},
+		{
+			"name": "Generic PLA Silk @Prusa CORE One 0.6",
+			"sub_path": "filament/Generic PLA Silk @Prusa CORE One 0.6.json"
+		},
+		{
+			"name": "Generic PLA Silk @Prusa CORE One 0.8",
+			"sub_path": "filament/Generic PLA Silk @Prusa CORE One 0.8.json"
 		},
 		{
 			"name": "fdm_filament_abs",
@@ -1648,22 +1664,6 @@
 			"name": "fdm_filament_tpu",
 			"sub_path": "filament/fdm_filament_tpu.json"
 		},
-		{
-			"name": "Generic PLA Silk @Prusa CORE One INDX",
-			"sub_path": "filament/Generic PLA Silk @Prusa CORE One INDX.json"
-		},
-		{
-			"name": "Generic ASA @Prusa CORE One",
-			"sub_path": "filament/Generic ASA @Prusa CORE One.json"
-		},
-		{
-			"name": "Generic PC @Prusa MK4 MMU3",
-			"sub_path": "filament/Generic PC @Prusa MK4 MMU3.json"
-		},
-		{
-			"name": "Generic PLA Silk @Prusa CORE One",
-			"sub_path": "filament/Generic PLA Silk @Prusa CORE One.json"
-		},
 		{
 			"name": "Generic ABS @Prusa MK3.5",
 			"sub_path": "filament/Generic ABS @Prusa MK3.5.json"
@@ -2160,38 +2160,6 @@
 			"name": "Generic TPU HF @Prusa MK3.5",
 			"sub_path": "filament/Generic TPU HF @Prusa MK3.5.json"
 		},
-		{
-			"name": "Generic ASA @Prusa CORE One 0.6",
-			"sub_path": "filament/Generic ASA @Prusa CORE One 0.6.json"
-		},
-		{
-			"name": "Generic ASA @Prusa CORE One 0.8",
-			"sub_path": "filament/Generic ASA @Prusa CORE One 0.8.json"
-		},
-		{
-			"name": "Generic ASA @Prusa CORE One HF 0.4",
-			"sub_path": "filament/Generic ASA @Prusa CORE One HF 0.4.json"
-		},
-		{
-			"name": "Generic ASA @Prusa CORE One HF 0.5",
-			"sub_path": "filament/Generic ASA @Prusa CORE One HF 0.5.json"
-		},
-		{
-			"name": "Generic ASA @Prusa CORE One HF 0.6",
-			"sub_path": "filament/Generic ASA @Prusa CORE One HF 0.6.json"
-		},
-		{
-			"name": "Generic ASA @Prusa CORE One HF 0.8",
-			"sub_path": "filament/Generic ASA @Prusa CORE One HF 0.8.json"
-		},
-		{
-			"name": "Generic PLA Silk @Prusa CORE One 0.6",
-			"sub_path": "filament/Generic PLA Silk @Prusa CORE One 0.6.json"
-		},
-		{
-			"name": "Generic PLA Silk @Prusa CORE One 0.8",
-			"sub_path": "filament/Generic PLA Silk @Prusa CORE One 0.8.json"
-		},
 		{
 			"name": "Generic ABS @Prusa MK4S HF0.4",
 			"sub_path": "filament/Generic ABS @Prusa MK4S HF0.4.json"
@@ -2244,10 +2212,6 @@
 			"name": "Generic ABS HF @Prusa MINIIS 0.8",
 			"sub_path": "filament/Generic ABS HF @Prusa MINIIS 0.8.json"
 		},
-		{
-			"name": "Generic ASA @Prusa MK4 MMU3",
-			"sub_path": "filament/Generic ASA @Prusa MK4 MMU3.json"
-		},
 		{
 			"name": "Generic ASA @Prusa MK4S 0.6",
 			"sub_path": "filament/Generic ASA @Prusa MK4S 0.6.json"
@@ -2296,10 +2260,6 @@
 			"name": "Prusament ASA @CORE One HF 0.8",
 			"sub_path": "filament/Prusament ASA @CORE One HF 0.8.json"
 		},
-		{
-			"name": "Prusament ASA @MK4 MMU3",
-			"sub_path": "filament/Prusament ASA @MK4 MMU3.json"
-		},
 		{
 			"name": "Prusament ASA @MK4S 0.6",
 			"sub_path": "filament/Prusament ASA @MK4S 0.6.json"
@@ -2432,10 +2392,6 @@
 			"name": "Prusament PC Blend @CORE One HF 0.8",
 			"sub_path": "filament/Prusament PC Blend @CORE One HF 0.8.json"
 		},
-		{
-			"name": "Prusament PC Blend @MK4 MMU3",
-			"sub_path": "filament/Prusament PC Blend @MK4 MMU3.json"
-		},
 		{
 			"name": "Prusament PC Blend @MK4S 0.6",
 			"sub_path": "filament/Prusament PC Blend @MK4S 0.6.json"
@@ -2576,10 +2532,6 @@
 			"name": "Prusament PETG @CORE One HF 0.8",
 			"sub_path": "filament/Prusament PETG @CORE One HF 0.8.json"
 		},
-		{
-			"name": "Prusament PETG @MK4 MMU3",
-			"sub_path": "filament/Prusament PETG @MK4 MMU3.json"
-		},
 		{
 			"name": "Prusament PETG @MK4S 0.6",
 			"sub_path": "filament/Prusament PETG @MK4S 0.6.json"
@@ -2716,10 +2668,6 @@
 			"name": "Prusament PLA @CORE One HF 0.8",
 			"sub_path": "filament/Prusament PLA @CORE One HF 0.8.json"
 		},
-		{
-			"name": "Prusament PLA @MK4 MMU3",
-			"sub_path": "filament/Prusament PLA @MK4 MMU3.json"
-		},
 		{
 			"name": "Prusament PLA @MK4S 0.6",
 			"sub_path": "filament/Prusament PLA @MK4S 0.6.json"
@@ -2756,10 +2704,6 @@
 			"name": "Prusament rPLA @CORE One 0.8",
 			"sub_path": "filament/Prusament rPLA @CORE One 0.8.json"
 		},
-		{
-			"name": "Prusament rPLA @MK4 MMU3",
-			"sub_path": "filament/Prusament rPLA @MK4 MMU3.json"
-		},
 		{
 			"name": "Prusament rPLA @MK4S 0.6",
 			"sub_path": "filament/Prusament rPLA @MK4S 0.6.json"
@@ -2912,10 +2856,6 @@
 			"name": "Generic ABS @Prusa CORE One HF 0.8",
 			"sub_path": "filament/Generic ABS @Prusa CORE One HF 0.8.json"
 		},
-		{
-			"name": "Generic ABS @Prusa MK4 MMU3",
-			"sub_path": "filament/Generic ABS @Prusa MK4 MMU3.json"
-		},
 		{
 			"name": "Generic ASA @Prusa MK4S HF0.5",
 			"sub_path": "filament/Generic ASA @Prusa MK4S HF0.5.json"
@@ -2964,10 +2904,6 @@
 			"name": "Generic PETG @Prusa CORE One HF 0.8",
 			"sub_path": "filament/Generic PETG @Prusa CORE One HF 0.8.json"
 		},
-		{
-			"name": "Generic PETG @Prusa MK4 MMU3",
-			"sub_path": "filament/Generic PETG @Prusa MK4 MMU3.json"
-		},
 		{
 			"name": "Generic PLA @Prusa MK4S HF0.5",
 			"sub_path": "filament/Generic PLA @Prusa MK4S HF0.5.json"
@@ -3012,10 +2948,6 @@
 			"name": "Generic PLA @Prusa CORE One HF 0.8",
 			"sub_path": "filament/Generic PLA @Prusa CORE One HF 0.8.json"
 		},
-		{
-			"name": "Generic PLA @Prusa MK4 MMU3",
-			"sub_path": "filament/Generic PLA @Prusa MK4 MMU3.json"
-		},
 		{
 			"name": "Generic TPU @Prusa CORE One 0.6",
 			"sub_path": "filament/Generic TPU @Prusa CORE One 0.6.json"
@@ -3023,6 +2955,14 @@
 		{
 			"name": "Generic TPU @Prusa CORE One 0.8",
 			"sub_path": "filament/Generic TPU @Prusa CORE One 0.8.json"
+		},
+		{
+			"name": "Generic PC @Prusa",
+			"sub_path": "filament/Generic PC @Prusa.json"
+		},
+		{
+			"name": "Generic PLA Silk @Prusa CORE One INDX",
+			"sub_path": "filament/Generic PLA Silk @Prusa CORE One INDX.json"
 		}
 	],
 	"machine_list": [

resources/profiles/Prusa/filament/Generic ABS @Prusa CORE One HF 0.4.json

@@ -7,9 +7,6 @@
 	"setting_id": "ASYz8yASE82tQDII",
 	"filament_id": "OFY9muEs",
 	"instantiation": "true",
-	"include": [
-		"fdm_filament_template_nextruder_pet_hf"
-	],
 	"compatible_printers": [
 		"Prusa CORE One HF 0.4 nozzle"
 	],

resources/profiles/Prusa/filament/Generic ABS @Prusa CORE One HF 0.5.json

@@ -7,9 +7,6 @@
 	"setting_id": "mzZCm8XDmAR23YR6",
 	"filament_id": "OFY9muEs",
 	"instantiation": "true",
-	"include": [
-		"fdm_filament_template_nextruder_pet_hf"
-	],
 	"compatible_printers": [
 		"Prusa CORE One HF 0.5 nozzle"
 	],

resources/profiles/Prusa/filament/Generic ABS @Prusa CORE One HF 0.6.json

@@ -7,9 +7,6 @@
 	"setting_id": "gJhX2KBpk4wfXIj0",
 	"filament_id": "OFY9muEs",
 	"instantiation": "true",
-	"include": [
-		"fdm_filament_template_nextruder_pet_hf"
-	],
 	"compatible_printers": [
 		"Prusa CORE One HF 0.6 nozzle"
 	],

resources/profiles/Prusa/filament/Generic ABS @Prusa CORE One INDX.json

@@ -5,9 +5,6 @@
 	"from": "system",
 	"setting_id": "JEatvybG9xIkrPk3",
 	"instantiation": "true",
-	"include": [
-		"fdm_filament_template_indx"
-	],
 	"filament_cost": [
 		"34.65"
 	],

resources/profiles/Prusa/filament/Generic ABS @Prusa CORE One.json

@@ -6,9 +6,6 @@
 	"from": "system",
 	"setting_id": "0k31oXq1pLQsHvrj",
 	"instantiation": "true",
-	"include": [
-		"fdm_filament_template_nextruder_pet"
-	],
 	"chamber_temperature": [
 		"40"
 	],

resources/profiles/Prusa/filament/Generic ABS @Prusa MK4 MMU3.json

@@ -1,19 +0,0 @@
-{
-	"type": "filament",
-	"name": "Generic ABS @Prusa MK4 MMU3",
-	"inherits": "Generic ABS @Prusa MK4",
-	"from": "system",
-	"setting_id": "uFmixo2FX1yxNsDB",
-	"instantiation": "true",
-	"include": [
-		"fdm_filament_template_nextruder_pet"
-	],
-	"compatible_printers": [
-		"Prusa MK4 MMU3 0.4 nozzle",
-		"Prusa MK4 MMU3 0.6 nozzle",
-		"Prusa MK4 MMU3 HF0.4 nozzle"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"35"
-	]
-}

resources/profiles/Prusa/filament/Generic ASA @Prusa CORE One HF 0.4.json

@@ -7,9 +7,6 @@
 	"setting_id": "eKDfiVRE59itoppm",
 	"filament_id": "OFLPAxz3",
 	"instantiation": "true",
-	"include": [
-		"fdm_filament_template_nextruder_pet_hf"
-	],
 	"compatible_printers": [
 		"Prusa CORE One HF 0.4 nozzle"
 	],

resources/profiles/Prusa/filament/Generic ASA @Prusa CORE One HF 0.5.json

@@ -7,9 +7,6 @@
 	"setting_id": "ZjHf5Vvtf4ESNnWb",
 	"filament_id": "OFLPAxz3",
 	"instantiation": "true",
-	"include": [
-		"fdm_filament_template_nextruder_pet_hf"
-	],
 	"compatible_printers": [
 		"Prusa CORE One HF 0.5 nozzle"
 	],

resources/profiles/Prusa/filament/Generic ASA @Prusa CORE One HF 0.6.json

@@ -7,9 +7,6 @@
 	"setting_id": "aRDgUgQJWdNDJx5c",
 	"filament_id": "OFLPAxz3",
 	"instantiation": "true",
-	"include": [
-		"fdm_filament_template_nextruder_pet_hf"
-	],
 	"compatible_printers": [
 		"Prusa CORE One HF 0.6 nozzle"
 	],

resources/profiles/Prusa/filament/Generic ASA @Prusa CORE One.json

@@ -6,9 +6,6 @@
 	"from": "system",
 	"setting_id": "Q7fgojkHRZI0floy",
 	"instantiation": "true",
-	"include": [
-		"fdm_filament_template_nextruder_pet"
-	],
 	"chamber_temperature": [
 		"40"
 	],

resources/profiles/Prusa/filament/Generic ASA @Prusa MK4 MMU3.json

@@ -1,19 +0,0 @@
-{
-	"type": "filament",
-	"name": "Generic ASA @Prusa MK4 MMU3",
-	"inherits": "Generic ASA @Prusa MK4",
-	"from": "system",
-	"setting_id": "iq9bFkpmAOJ4ae4g",
-	"instantiation": "true",
-	"include": [
-		"fdm_filament_template_nextruder_pet"
-	],
-	"compatible_printers": [
-		"Prusa MK4 MMU3 0.4 nozzle",
-		"Prusa MK4 MMU3 0.6 nozzle",
-		"Prusa MK4 MMU3 HF0.4 nozzle"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"35"
-	]
-}

resources/profiles/Prusa/filament/Generic PC @Prusa MK4 MMU3.json

@@ -1,16 +0,0 @@
-{
-	"type": "filament",
-	"name": "Generic PC @Prusa MK4 MMU3",
-	"inherits": "Generic PC @Prusa",
-	"from": "system",
-	"setting_id": "qMawlK9QPI7DcF8I",
-	"instantiation": "true",
-	"include": [
-		"fdm_filament_template_nextruder_pet"
-	],
-	"compatible_printers": [
-		"Prusa MK4 MMU3 0.4 nozzle",
-		"Prusa MK4 MMU3 0.6 nozzle",
-		"Prusa MK4 MMU3 HF0.4 nozzle"
-	]
-}

resources/profiles/Prusa/filament/Generic PETG @Prusa CORE One HF 0.4.json

@@ -7,9 +7,6 @@
 	"setting_id": "7oUyjvRHLH4bJyX0",
 	"filament_id": "OFYPdQJh",
 	"instantiation": "true",
-	"include": [
-		"fdm_filament_template_nextruder_pet_hf"
-	],
 	"compatible_printers": [
 		"Prusa CORE One HF 0.4 nozzle"
 	],

resources/profiles/Prusa/filament/Generic PETG @Prusa CORE One HF 0.5.json

@@ -7,9 +7,6 @@
 	"setting_id": "6HiIOGURZWwman1l",
 	"filament_id": "OFYPdQJh",
 	"instantiation": "true",
-	"include": [
-		"fdm_filament_template_nextruder_pet_hf"
-	],
 	"compatible_printers": [
 		"Prusa CORE One HF 0.5 nozzle"
 	],

resources/profiles/Prusa/filament/Generic PETG @Prusa CORE One HF 0.6.json

@@ -7,9 +7,6 @@
 	"setting_id": "KKiug7A9NOQPe1m7",
 	"filament_id": "OFYPdQJh",
 	"instantiation": "true",
-	"include": [
-		"fdm_filament_template_nextruder_pet_hf"
-	],
 	"compatible_printers": [
 		"Prusa CORE One HF 0.6 nozzle"
 	],

resources/profiles/Prusa/filament/Generic PETG @Prusa CORE One INDX.json

@@ -5,9 +5,6 @@
 	"from": "system",
 	"setting_id": "HbevqxqvYHuvRc3v",
 	"instantiation": "true",
-	"include": [
-		"fdm_filament_template_indx"
-	],
 	"filament_cost": [
 		"27.82"
 	],

resources/profiles/Prusa/filament/Generic PETG @Prusa CORE One.json

@@ -6,9 +6,6 @@
 	"from": "system",
 	"setting_id": "W71PW5bpf7CV16D4",
 	"instantiation": "true",
-	"include": [
-		"fdm_filament_template_nextruder_pet"
-	],
 	"chamber_temperature": [
 		"35"
 	],

resources/profiles/Prusa/filament/Generic PETG @Prusa MK4 MMU3.json

@@ -1,19 +0,0 @@
-{
-	"type": "filament",
-	"name": "Generic PETG @Prusa MK4 MMU3",
-	"inherits": "Generic PETG @Prusa MK4",
-	"from": "system",
-	"setting_id": "lBiZBFpSXZNIp5XG",
-	"instantiation": "true",
-	"include": [
-		"fdm_filament_template_nextruder_pet"
-	],
-	"compatible_printers": [
-		"Prusa MK4 MMU3 0.4 nozzle",
-		"Prusa MK4 MMU3 0.6 nozzle",
-		"Prusa MK4 MMU3 HF0.4 nozzle"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"35"
-	]
-}

resources/profiles/Prusa/filament/Generic PLA @Prusa CORE One 0.6.json

@@ -8,16 +8,12 @@
 	"filament_id": "OFDSrzZ8",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Prusa CORE One 0.6 nozzle",
-		"Prusa CORE One MMU3 0.6 nozzle"
+		"Prusa CORE One 0.6 nozzle"
 	],
 	"nozzle_temperature": [
 		"210"
 	],
 	"slow_down_layer_time": [
 		"15"
-	],
-	"filament_cooling_final_speed": [
-		"1.5"
 	]
 }

resources/profiles/Prusa/filament/Generic PLA @Prusa CORE One HF 0.4.json

@@ -7,9 +7,6 @@
 	"setting_id": "vniEPaoyABoAfLFa",
 	"filament_id": "OFDSrzZ8",
 	"instantiation": "true",
-	"include": [
-		"fdm_filament_template_nextruder_pla_hf"
-	],
 	"compatible_printers": [
 		"Prusa CORE One HF 0.4 nozzle",
 		"Prusa CORE One L HF 0.4 nozzle"

resources/profiles/Prusa/filament/Generic PLA @Prusa CORE One HF 0.5.json

@@ -7,9 +7,6 @@
 	"setting_id": "NPEs4gtBlKWupYZX",
 	"filament_id": "OFDSrzZ8",
 	"instantiation": "true",
-	"include": [
-		"fdm_filament_template_nextruder_pla_hf"
-	],
 	"compatible_printers": [
 		"Prusa CORE One HF 0.5 nozzle"
 	],

resources/profiles/Prusa/filament/Generic PLA @Prusa CORE One HF 0.6.json

@@ -7,9 +7,6 @@
 	"setting_id": "SnfULjrWGCiA7ljq",
 	"filament_id": "OFDSrzZ8",
 	"instantiation": "true",
-	"include": [
-		"fdm_filament_template_nextruder_pla_hf"
-	],
 	"compatible_printers": [
 		"Prusa CORE One HF 0.6 nozzle"
 	],
@@ -27,8 +24,5 @@
 	],
 	"slow_down_min_speed": [
 		"15"
-	],
-	"filament_cooling_final_speed": [
-		"1.5"
 	]
 }

resources/profiles/Prusa/filament/Generic PLA @Prusa CORE One INDX.json

@@ -5,9 +5,6 @@
 	"from": "system",
 	"setting_id": "4qjcaIf1vk3K1x4Z",
 	"instantiation": "true",
-	"include": [
-		"fdm_filament_template_indx"
-	],
 	"filament_cost": [
 		"25.4"
 	],

resources/profiles/Prusa/filament/Generic PLA @Prusa CORE One.json

@@ -6,9 +6,6 @@
 	"from": "system",
 	"setting_id": "r2i4c7DsYXYIMVCX",
 	"instantiation": "true",
-	"include": [
-		"fdm_filament_template_nextruder_pla"
-	],
 	"chamber_temperature": [
 		"20"
 	],
@@ -20,7 +17,8 @@
 		"Prusa CORE One L 0.4 nozzle",
 		"Prusa CORE One MMU3 0.4 nozzle",
 		"Prusa CORE One MMU3 0.25 nozzle",
-		"Prusa CORE One MMU3 0.3 nozzle"
+		"Prusa CORE One MMU3 0.3 nozzle",
+		"Prusa CORE One MMU3 0.6 nozzle"
 	],
 	"fan_cooling_layer_time": [
 		"40"

resources/profiles/Prusa/filament/Generic PLA @Prusa MK4 MMU3.json

@@ -1,16 +0,0 @@
-{
-	"type": "filament",
-	"name": "Generic PLA @Prusa MK4 MMU3",
-	"inherits": "Generic PLA @Prusa MK4",
-	"from": "system",
-	"setting_id": "kZvIh84niJ487FsY",
-	"instantiation": "true",
-	"include": [
-		"fdm_filament_template_nextruder_pla"
-	],
-	"compatible_printers": [
-		"Prusa MK4 MMU3 0.4 nozzle",
-		"Prusa MK4 MMU3 0.6 nozzle",
-		"Prusa MK4 MMU3 HF0.4 nozzle"
-	]
-}

resources/profiles/Prusa/filament/Generic PLA Silk @Prusa CORE One 0.6.json

@@ -29,8 +29,5 @@
 	],
 	"slow_down_layer_time": [
 		"15"
-	],
-	"filament_cooling_final_speed": [
-		"1.5"
 	]
 }

resources/profiles/Prusa/filament/Generic PLA Silk @Prusa CORE One INDX.json

@@ -5,9 +5,6 @@
 	"from": "system",
 	"setting_id": "eKla6su22rYaL9iz",
 	"instantiation": "true",
-	"include": [
-		"fdm_filament_template_indx"
-	],
 	"filament_flow_ratio": [
 		"1",
 		"1",

resources/profiles/Prusa/filament/Generic PLA Silk @Prusa CORE One.json

@@ -6,9 +6,6 @@
 	"from": "system",
 	"setting_id": "F9lNHyhZwZi7aD74",
 	"instantiation": "true",
-	"include": [
-		"fdm_filament_template_nextruder_pla"
-	],
 	"chamber_temperature": [
 		"20"
 	],

resources/profiles/Prusa/filament/Prusament ASA @CORE One HF 0.4.json

@@ -6,9 +6,6 @@
 	"setting_id": "tXktQXr79am1s5UL",
 	"filament_id": "OFmFwUWM",
 	"instantiation": "true",
-	"include": [
-		"fdm_filament_template_nextruder_pet_hf"
-	],
 	"compatible_printers": [
 		"Prusa CORE One HF 0.4 nozzle"
 	],

resources/profiles/Prusa/filament/Prusament ASA @CORE One HF 0.5.json

@@ -6,9 +6,6 @@
 	"setting_id": "YbyojtjXvEtI4Tt3",
 	"filament_id": "OFmFwUWM",
 	"instantiation": "true",
-	"include": [
-		"fdm_filament_template_nextruder_pet_hf"
-	],
 	"compatible_printers": [
 		"Prusa CORE One HF 0.5 nozzle"
 	],

resources/profiles/Prusa/filament/Prusament ASA @CORE One HF 0.6.json

@@ -6,9 +6,6 @@
 	"setting_id": "35H9TLr1p2Jy767g",
 	"filament_id": "OFmFwUWM",
 	"instantiation": "true",
-	"include": [
-		"fdm_filament_template_nextruder_pet_hf"
-	],
 	"compatible_printers": [
 		"Prusa CORE One HF 0.6 nozzle"
 	],

resources/profiles/Prusa/filament/Prusament ASA @CORE One.json

@@ -7,9 +7,6 @@
 	"setting_id": "UUTjJ4Y8St3c87jD",
 	"filament_id": "OFmFwUWM",
 	"instantiation": "true",
-	"include": [
-		"fdm_filament_template_nextruder_pet"
-	],
 	"chamber_temperature": [
 		"40"
 	],

resources/profiles/Prusa/filament/Prusament ASA @MK4 MMU3.json

@@ -1,19 +0,0 @@
-{
-	"type": "filament",
-	"name": "Prusament ASA @MK4 MMU3",
-	"inherits": "Prusament ASA @MK4",
-	"from": "system",
-	"setting_id": "IRJ2dtBgjCMfmpOH",
-	"instantiation": "true",
-	"include": [
-		"fdm_filament_template_nextruder_pet"
-	],
-	"compatible_printers": [
-		"Prusa MK4 MMU3 0.4 nozzle",
-		"Prusa MK4 MMU3 0.6 nozzle",
-		"Prusa MK4 MMU3 HF0.4 nozzle"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"35"
-	]
-}

resources/profiles/Prusa/filament/Prusament PA11 Carbon Fiber @CORE One.json

@@ -7,9 +7,6 @@
 	"setting_id": "sNGgucQjiFXwuFkq",
 	"filament_id": "OF4MZtnE",
 	"instantiation": "true",
-	"include": [
-		"fdm_filament_template_nextruder_pet"
-	],
 	"chamber_temperature": [
 		"40"
 	],

resources/profiles/Prusa/filament/Prusament PC Blend @CORE One HF 0.4.json

@@ -6,9 +6,6 @@
 	"setting_id": "pEsP537TBR5kozQB",
 	"filament_id": "OFvDbkFq",
 	"instantiation": "true",
-	"include": [
-		"fdm_filament_template_nextruder_pet_hf"
-	],
 	"compatible_printers": [
 		"Prusa CORE One HF 0.4 nozzle"
 	],

resources/profiles/Prusa/filament/Prusament PC Blend @CORE One HF 0.5.json

@@ -6,9 +6,6 @@
 	"setting_id": "3IfLi1ZVCKKbEBUW",
 	"filament_id": "OFvDbkFq",
 	"instantiation": "true",
-	"include": [
-		"fdm_filament_template_nextruder_pet_hf"
-	],
 	"compatible_printers": [
 		"Prusa CORE One HF 0.5 nozzle"
 	],

resources/profiles/Prusa/filament/Prusament PC Blend @CORE One HF 0.6.json

@@ -6,9 +6,6 @@
 	"setting_id": "Q8qWw2G7l2UvxGut",
 	"filament_id": "OFvDbkFq",
 	"instantiation": "true",
-	"include": [
-		"fdm_filament_template_nextruder_pet_hf"
-	],
 	"compatible_printers": [
 		"Prusa CORE One HF 0.6 nozzle"
 	],

resources/profiles/Prusa/filament/Prusament PC Blend @CORE One.json

@@ -7,9 +7,6 @@
 	"setting_id": "x1SkWhSSkVVIPwCF",
 	"filament_id": "OFvDbkFq",
 	"instantiation": "true",
-	"include": [
-		"fdm_filament_template_nextruder_pet"
-	],
 	"chamber_temperature": [
 		"40"
 	],

resources/profiles/Prusa/filament/Prusament PC Blend @MK4 MMU3.json

@@ -1,16 +0,0 @@
-{
-	"type": "filament",
-	"name": "Prusament PC Blend @MK4 MMU3",
-	"inherits": "Prusament PC Blend @MK4",
-	"from": "system",
-	"setting_id": "gmNuCspHHxgP6zH8",
-	"instantiation": "true",
-	"include": [
-		"fdm_filament_template_nextruder_pet"
-	],
-	"compatible_printers": [
-		"Prusa MK4 MMU3 0.4 nozzle",
-		"Prusa MK4 MMU3 0.6 nozzle",
-		"Prusa MK4 MMU3 HF0.4 nozzle"
-	]
-}

resources/profiles/Prusa/filament/Prusament PC Blend Carbon Fiber @CORE One.json

@@ -7,9 +7,6 @@
 	"setting_id": "B8Cm9l8i9osp5J2q",
 	"filament_id": "OFdO6vpt",
 	"instantiation": "true",
-	"include": [
-		"fdm_filament_template_nextruder_pet"
-	],
 	"chamber_temperature": [
 		"40"
 	],

resources/profiles/Prusa/filament/Prusament PETG @CORE One HF 0.4.json

@@ -6,9 +6,6 @@
 	"setting_id": "lwT1VxW5OkY36kUX",
 	"filament_id": "OFkR8E2c",
 	"instantiation": "true",
-	"include": [
-		"fdm_filament_template_nextruder_pet_hf"
-	],
 	"compatible_printers": [
 		"Prusa CORE One HF 0.4 nozzle"
 	],

resources/profiles/Prusa/filament/Prusament PETG @CORE One HF 0.5.json

@@ -6,9 +6,6 @@
 	"setting_id": "XAgW7fElXxhaKaBT",
 	"filament_id": "OFkR8E2c",
 	"instantiation": "true",
-	"include": [
-		"fdm_filament_template_nextruder_pet_hf"
-	],
 	"compatible_printers": [
 		"Prusa CORE One HF 0.5 nozzle"
 	],

resources/profiles/Prusa/filament/Prusament PETG @CORE One HF 0.6.json

@@ -6,9 +6,6 @@
 	"setting_id": "6aTGEZj2EmpTR1mu",
 	"filament_id": "OFkR8E2c",
 	"instantiation": "true",
-	"include": [
-		"fdm_filament_template_nextruder_pet_hf"
-	],
 	"compatible_printers": [
 		"Prusa CORE One HF 0.6 nozzle"
 	],

resources/profiles/Prusa/filament/Prusament PETG @CORE One.json

@@ -7,9 +7,6 @@
 	"setting_id": "LSvba9ds3XTwDMCG",
 	"filament_id": "OFkR8E2c",
 	"instantiation": "true",
-	"include": [
-		"fdm_filament_template_nextruder_pet"
-	],
 	"chamber_temperature": [
 		"35"
 	],

resources/profiles/Prusa/filament/Prusament PETG @MK4 MMU3.json

@@ -1,19 +0,0 @@
-{
-	"type": "filament",
-	"name": "Prusament PETG @MK4 MMU3",
-	"inherits": "Prusament PETG @MK4",
-	"from": "system",
-	"setting_id": "7DQ6YEKyQKYDTKtE",
-	"instantiation": "true",
-	"include": [
-		"fdm_filament_template_nextruder_pet"
-	],
-	"compatible_printers": [
-		"Prusa MK4 MMU3 0.4 nozzle",
-		"Prusa MK4 MMU3 0.6 nozzle",
-		"Prusa MK4 MMU3 HF0.4 nozzle"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"35"
-	]
-}

resources/profiles/Prusa/filament/Prusament PETG @Prusa CORE One INDX.json

@@ -6,9 +6,6 @@
 	"setting_id": "2viuOmBvXuQm2FwV",
 	"filament_id": "OFkR8E2c",
 	"instantiation": "true",
-	"include": [
-		"fdm_filament_template_indx"
-	],
 	"filament_flow_ratio": [
 		"1"
 	],

resources/profiles/Prusa/filament/Prusament PLA @CORE One HF 0.4.json

@@ -6,9 +6,6 @@
 	"setting_id": "mf4Muog4IcsgkYoA",
 	"filament_id": "OFnO4wnf",
 	"instantiation": "true",
-	"include": [
-		"fdm_filament_template_nextruder_pla_hf"
-	],
 	"compatible_printers": [
 		"Prusa CORE One HF 0.4 nozzle",
 		"Prusa CORE One L HF 0.4 nozzle"

resources/profiles/Prusa/filament/Prusament PLA @CORE One.json

@@ -7,9 +7,6 @@
 	"setting_id": "PuujUMjNKLZvZNAH",
 	"filament_id": "OFnO4wnf",
 	"instantiation": "true",
-	"include": [
-		"fdm_filament_template_nextruder_pla"
-	],
 	"chamber_temperature": [
 		"20"
 	],
@@ -107,11 +104,5 @@
 	],
 	"slow_down_min_speed": [
 		"20"
-	],
-	"filament_unloading_speed": [
-		"100"
-	],
-	"filament_unloading_speed_start": [
-		"100"
 	]
 }

resources/profiles/Prusa/filament/Prusament PLA @MK4 MMU3.json

@@ -1,22 +0,0 @@
-{
-	"type": "filament",
-	"name": "Prusament PLA @MK4 MMU3",
-	"inherits": "Prusament PLA @MK4",
-	"from": "system",
-	"setting_id": "MsDcN4npnmLRXOjm",
-	"instantiation": "true",
-	"include": [
-		"fdm_filament_template_nextruder_pla"
-	],
-	"compatible_printers": [
-		"Prusa MK4 MMU3 0.4 nozzle",
-		"Prusa MK4 MMU3 0.6 nozzle",
-		"Prusa MK4 MMU3 HF0.4 nozzle"
-	],
-	"filament_unloading_speed": [
-		"100"
-	],
-	"filament_unloading_speed_start": [
-		"100"
-	]
-}

resources/profiles/Prusa/filament/Prusament PLA @Prusa CORE One INDX.json

@@ -6,9 +6,6 @@
 	"setting_id": "B2UB9QUbbjpn12Ka",
 	"filament_id": "OFnO4wnf",
 	"instantiation": "true",
-	"include": [
-		"fdm_filament_template_indx"
-	],
 	"filament_flow_ratio": [
 		"1"
 	],

resources/profiles/Prusa/filament/Prusament PVB @CORE One.json

@@ -7,9 +7,6 @@
 	"setting_id": "085dGkrnPhatF07x",
 	"filament_id": "OFh7mvPO",
 	"instantiation": "true",
-	"include": [
-		"fdm_filament_template_nextruder_pla"
-	],
 	"chamber_temperature": [
 		"20"
 	],
@@ -108,11 +105,5 @@
 	],
 	"slow_down_min_speed": [
 		"20"
-	],
-	"filament_unloading_speed": [
-		"60"
-	],
-	"filament_unloading_speed_start": [
-		"60"
 	]
 }

resources/profiles/Prusa/filament/Prusament rPLA @CORE One 0.6.json

@@ -8,16 +8,12 @@
 	"instantiation": "true",
 	"compatible_printers": [
 		"Prusa CORE One 0.6 nozzle",
-		"Prusa CORE One HF 0.6 nozzle",
-		"Prusa CORE One MMU3 0.6 nozzle"
+		"Prusa CORE One HF 0.6 nozzle"
 	],
 	"filament_max_volumetric_speed": [
 		"14"
 	],
 	"slow_down_layer_time": [
 		"15"
-	],
-	"filament_cooling_final_speed": [
-		"1.5"
 	]
 }

resources/profiles/Prusa/filament/Prusament rPLA @CORE One.json

@@ -7,9 +7,6 @@
 	"setting_id": "Bw6H4vFnq7YExyLd",
 	"filament_id": "OFWRITFw",
 	"instantiation": "true",
-	"include": [
-		"fdm_filament_template_nextruder_pla"
-	],
 	"chamber_temperature": [
 		"20"
 	],
@@ -25,7 +22,8 @@
 		"Prusa CORE One HF 0.5 nozzle",
 		"Prusa CORE One MMU3 0.4 nozzle",
 		"Prusa CORE One MMU3 0.25 nozzle",
-		"Prusa CORE One MMU3 0.3 nozzle"
+		"Prusa CORE One MMU3 0.3 nozzle",
+		"Prusa CORE One MMU3 0.6 nozzle"
 	],
 	"fan_cooling_layer_time": [
 		"40"

resources/profiles/Prusa/filament/Prusament rPLA @MK4 MMU3.json

@@ -1,16 +0,0 @@
-{
-	"type": "filament",
-	"name": "Prusament rPLA @MK4 MMU3",
-	"inherits": "Prusament rPLA @MK4",
-	"from": "system",
-	"setting_id": "wKhvyGpgjmW6glLj",
-	"instantiation": "true",
-	"include": [
-		"fdm_filament_template_nextruder_pla"
-	],
-	"compatible_printers": [
-		"Prusa MK4 MMU3 0.4 nozzle",
-		"Prusa MK4 MMU3 0.6 nozzle",
-		"Prusa MK4 MMU3 HF0.4 nozzle"
-	]
-}

resources/profiles/Prusa/filament/fdm_filament_template_indx.json

@@ -1,21 +0,0 @@
-{
-	"type": "filament",
-	"name": "fdm_filament_template_indx",
-	"from": "system",
-	"instantiation": "false",
-	"filament_multitool_ramming": [
-		"1"
-	],
-	"filament_multitool_ramming_flow": [
-		"30"
-	],
-	"filament_multitool_ramming_volume": [
-		"18"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"10"
-	],
-	"filament_start_gcode": [
-		"M572 S{pressure_advance[filament_extruder_id]} ; Pressure advance\nM573 R"
-	]
-}

resources/profiles/Prusa/filament/fdm_filament_template_nextruder_pet.json

@@ -1,36 +0,0 @@
-{
-	"type": "filament",
-	"name": "fdm_filament_template_nextruder_pet",
-	"from": "system",
-	"instantiation": "false",
-	"filament_ramming_parameters": [
-		"250 100 42.4194 42.4194 42.4194 42.4194 42.4194| 0.05 42.4387 0.45 42.4387 0.95 42.4387 1.45 42.4387 1.95 42.4387 2.45 42.4387 2.95 42.4387 3.45 42.4387 3.95 42.4387 4.45 42.4387 4.95 42.4387"
-	],
-	"filament_loading_speed": [
-		"10"
-	],
-	"filament_loading_speed_start": [
-		"50"
-	],
-	"filament_unloading_speed": [
-		"60"
-	],
-	"filament_unloading_speed_start": [
-		"60"
-	],
-	"filament_cooling_moves": [
-		"3"
-	],
-	"filament_cooling_initial_speed": [
-		"5"
-	],
-	"filament_cooling_final_speed": [
-		"2.5"
-	],
-	"filament_stamping_distance": [
-		"45"
-	],
-	"filament_stamping_loading_speed": [
-		"26.5"
-	]
-}

resources/profiles/Prusa/filament/fdm_filament_template_nextruder_pet_hf.json

@@ -1,9 +0,0 @@
-{
-	"type": "filament",
-	"name": "fdm_filament_template_nextruder_pet_hf",
-	"from": "system",
-	"instantiation": "false",
-	"filament_ramming_parameters": [
-		"250 100 42.4194 42.4194| 0.05 42.4387 0.45 42.4387 0.95 42.4387 1.45 42.4387 1.95 42.4387 2.45 42.4387 2.95 42.4387 3.45 42.4387 3.95 42.4387 4.45 42.4387 4.95 42.4387"
-	]
-}

resources/profiles/Prusa/filament/fdm_filament_template_nextruder_pla.json

@@ -1,36 +0,0 @@
-{
-	"type": "filament",
-	"name": "fdm_filament_template_nextruder_pla",
-	"from": "system",
-	"instantiation": "false",
-	"filament_ramming_parameters": [
-		"250 100 40.1613 40.3548 40.4516 40.3548 40.2581| 0.05 40.1483 0.45 40.3419 0.95 40.3419 1.45 40.3419 1.95 40.3419 2.45 40.3419 2.95 40.3419 3.45 40.3419 3.95 40.3419 4.45 40.3419 4.95 40.3419"
-	],
-	"filament_loading_speed": [
-		"10"
-	],
-	"filament_loading_speed_start": [
-		"50"
-	],
-	"filament_unloading_speed": [
-		"40"
-	],
-	"filament_unloading_speed_start": [
-		"30"
-	],
-	"filament_cooling_moves": [
-		"2"
-	],
-	"filament_cooling_initial_speed": [
-		"10"
-	],
-	"filament_cooling_final_speed": [
-		"3.5"
-	],
-	"filament_stamping_distance": [
-		"45"
-	],
-	"filament_stamping_loading_speed": [
-		"29"
-	]
-}

resources/profiles/Prusa/filament/fdm_filament_template_nextruder_pla_hf.json

@@ -1,9 +0,0 @@
-{
-	"type": "filament",
-	"name": "fdm_filament_template_nextruder_pla_hf",
-	"from": "system",
-	"instantiation": "false",
-	"filament_ramming_parameters": [
-		"250 100 39.871 39.871| 0.05 39.9547 0.45 39.9547 0.95 39.9547 1.45 39.9547 1.95 39.9547 2.45 39.9547 2.95 39.9547 3.45 39.9547 3.95 39.9547 4.45 39.9547 4.95 39.9547"
-	]
-}

resources/profiles/Prusa/machine/Prusa CORE One MMU3.json

@@ -3,7 +3,7 @@
 	"name": "Prusa CORE One MMU3",
 	"bed_model": "coreone_bed.stl",
 	"bed_texture": "coreone.svg",
-	"default_materials": "Generic ABS @Prusa CORE One;Generic ASA @Prusa CORE One;Generic PETG @Prusa CORE One;Generic PLA @Prusa CORE One;Generic PLA Silk @Prusa CORE One;Generic TPU @Prusa CORE One;Generic PLA @Prusa CORE One 0.6",
+	"default_materials": "Generic ABS @Prusa CORE One;Generic ASA @Prusa CORE One;Generic PETG @Prusa CORE One;Generic PLA @Prusa CORE One;Generic PLA Silk @Prusa CORE One;Generic TPU @Prusa CORE One",
 	"family": "Prusa",
 	"hotend_model": "",
 	"machine_tech": "FFF",

resources/profiles/Prusa/machine/Prusa MK4 MMU3 0.4 nozzle.json

@@ -16,7 +16,7 @@
 	],
 	"printer_model": "Prusa MK4 MMU3",
 	"default_filament_profile": [
-		"Generic PLA @Prusa MK4 MMU3"
+		"Generic PLA @System"
 	],
 	"default_print_profile": "0.20mm SPEED @MK4 MMU3 0.4",
 	"printer_notes": "Don't remove the following keywords! These keywords are used in the \"compatible printer\" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_MODEL_MK4IS\nPRINTER_MODEL_MK4MMU3\nPG"

resources/profiles/Prusa/machine/Prusa MK4 MMU3 0.6 nozzle.json

@@ -17,7 +17,7 @@
 	"printer_model": "Prusa MK4 MMU3",
 	"printer_variant": "0.6",
 	"default_filament_profile": [
-		"Generic PLA @Prusa MK4 MMU3"
+		"Generic PLA @System"
 	],
 	"default_print_profile": "0.25mm SPEED @MK4 MMU3 0.6",
 	"printer_notes": "Don't remove the following keywords! These keywords are used in the \"compatible printer\" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_MODEL_MK4IS\nPRINTER_MODEL_MK4MMU3\nPG"

resources/profiles/Prusa/machine/Prusa MK4 MMU3 HF.json

@@ -8,5 +8,5 @@
 	"bed_model": "mk4_bed.stl",
 	"bed_texture": "mk4is.svg",
 	"hotend_model": "",
-	"default_materials": "Generic PLA @Prusa MK4 MMU3;Generic PETG @Prusa MK4 MMU3;Generic ABS @Prusa MK4 MMU3"
+	"default_materials": "Generic PLA @System;Generic PETG @System;Generic ABS @System"
 }