AMS Sync, Filament Mapping, Storage Tab (#16156)

## Summary

Adds the remaining OrcaPrinterAgent work on top of feature/OrcaSonar:
connector capability gating, AMS filament mapping, and the printer
Storage tab. Contains no changes to the other printer agents (Moonraker,
Qidi, Snapmaker, BBL, Creality) — that refactor belongs to its own
branch.

## Changes

Capability gating (IPrinterAgent, OrcaPrinterAgent)

• Parse supported_features, capabilities.protocol.features, and
supported_commands from get_capabilities, including replies without a
flags block.
• Add supports_command, supports_feature, and uses_filament_mapping
queries with defaults that preserve existing agent behavior.
• Gate macro-backed AMS commands on fms plus the advertised command, and
slot metadata writes on filament_slots. Unknown capability means not
supported.

## AMS filament mapping

• Serialize ams_mapping2 into print.gcode_file.filament_mapping, keyed
by array position, dropping {255,255}; omit when empty so unmapped
prints stay byte-identical.
• Refuse a mapped print visibly until the correlation flag and
filament_mapping capability are satisfied, and refuse partially mapped
prints with an unmapped used filament. The GUI predicate shares the
serializer's definition.
• Resolve printer-set trays to the matching Generic preset by material
type and color; skip forced external-spool selection on printers without
an AMS.
• start_local_print_with_record returns non-success so PrintJob falls
back to start_print.

## AMS device UI on non-Bambu agents

• Resolve the printer model from the agent model id or selected profile
so the AMS Materials Setting dropdown and Confirm button work;
third-party trays keep editable temps.
• Render explicitly-empty trays as "Empty" via a wire-derived is_empty,
keeping the slot editable.
• Hide flow-dynamics K/N controls for non-Bambu agents, leaving Bambu
behavior unchanged.

## Storage tab (printer G-code files)

• New IPrinterAgent file APIs — list_printer_files,
get_printer_file_thumbnail, delete_printer_file,
get_printer_file_metadata — with ORCA_NETWORK_ERR_CMD_NOT_SUPPORTED
defaults.
• NetworkAgent forwards to the bound agent; OrcaPrinterAgent implements
them against /server/files.
• New StoragePanel / OrcaFilesPanel and a Printer/ file-grid abstraction
(IFileGridModel, RemoteFileGridModel, BambuFileGridModel).

## Tests

Covers serializer keying/omission, GUI/agent gate agreement, payload
shape, capability parsing and per-command AMS gating, model resolution,
empty-tray classification, and AMS sync.

resources/profiles/OrcaFilamentLibrary.json

@@ -1,6 +1,6 @@
 {
 	"name": "OrcaFilamentLibrary",
-	"version": "02.04.00.19",
+	"version": "02.04.00.18",
 	"force_update": "0",
 	"description": "Orca Filament Library",
 	"filament_list": [

resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA @base.json

@@ -6,7 +6,7 @@
 	"filament_id": "OFvgE0Zh",
 	"instantiation": "false",
 	"fan_cooling_layer_time": [
-		"80"
+		"85"
 	],
 	"fan_min_speed": [
 		"50"

src/OrcaSlicer.cpp

@@ -141,18 +141,6 @@ using namespace nlohmann;
 #include "slic3r/GUI/Plater.hpp"
 #include "slic3r/GUI/GuiColor.hpp"
 #include <GLFW/glfw3.h>
-#include "libslic3r/AppConfig.hpp"
-#include "libslic3r/BuildVolume.hpp"
-#include "libslic3r/ExPolygon.hpp"
-#include "libslic3r/Exception.hpp"
-#include "libslic3r/GCode/GCodeProcessor.hpp"
-#include "libslic3r/GCode/ToolOrdering.hpp"
-#include "libslic3r/ObjectID.hpp"
-#include "libslic3r/PresetBundle.hpp"
-#include "libslic3r/ProjectTask.hpp"
-#include "slic3r/GUI/GUI_ObjectList.hpp"
-#include "slic3r/GUI/I18N.hpp"
-#include "slic3r/GUI/Jobs/SendJob.hpp"
 
 namespace fs = boost::filesystem;
 
@@ -3618,9 +3606,6 @@ int CLI::run(int argc, char **argv)
                 {
                     if (opt_key == "compatible_prints" || opt_key == "compatible_printers" || opt_key == "model_id" || opt_key == "dev_model_name" || opt_key == "filament_settings_id")
                         continue;
-                    // rebuilt from every filament after this loop
-                    if (filament_dev_options.find(opt_key) != filament_dev_options.end())
-                        continue;
                     ConfigOption *opt = m_print_config.option(opt_key, true);
                     if (opt == nullptr) {
                         // opt_key does not exist in this ConfigBase and it cannot be created, because it is not defined by this->def().
@@ -3684,14 +3669,6 @@ int CLI::run(int argc, char **argv)
             }
         }
 
-        // The stored values cannot be told apart per filament, so they are kept as they are unless every slot has a config.
-        std::vector<const DynamicPrintConfig *> filament_configs(filament_count, nullptr);
-        for (size_t index = 0; index < load_filaments_config.size(); index++)
-            if (load_filaments_index[index] >= 1 && load_filaments_index[index] <= filament_count)
-                filament_configs[load_filaments_index[index] - 1] = &load_filaments_config[index];
-        if (std::find(filament_configs.begin(), filament_configs.end(), nullptr) == filament_configs.end())
-            set_filament_dev_options(m_print_config, filament_configs);
-
         if (m_print_config.option<ConfigOptionStrings>("filament_extruder_variant")) {
             std::vector<int>& filament_self_indice = m_print_config.option<ConfigOptionInts>("filament_self_index", true)->values;
             int index_size = m_print_config.option<ConfigOptionStrings>("filament_extruder_variant")->size();

src/OrcaSlicer.hpp

@@ -5,6 +5,7 @@
 #include "libslic3r/BoundingBox.hpp"
 #include "libslic3r/PrintConfig.hpp"
 #include "libslic3r/Format/bbs_3mf.hpp"
+#include "libslic3r/GCode/ThumbnailData.hpp"
 #include <set>
 #include <string>
 #include <vector>
@@ -13,10 +14,6 @@
 #include "libslic3r/Model.hpp"
 #include "libslic3r/Format/AssembleList.hpp"
 
-namespace Slic3r { class Preset; }
-namespace Slic3r { struct PlateBBoxData; }
-namespace Slic3r { struct ThumbnailData; }
-
 namespace Slic3r {
 
 namespace IO {

src/dev-utils/OrcaSlicer_profile_validator.cpp

@@ -57,8 +57,6 @@
 #include <iostream>
 #include <set>
 #include <string>
-#include "libslic3r/AppConfig.hpp"
-#include "libslic3r/Format/STEP.hpp"
 
 namespace fs = boost::filesystem;
 

src/dev-utils/profile_include_dump.cpp

@@ -26,7 +26,6 @@
 #include <stdexcept>
 #include <string>
 #include <vector>
-#include "libslic3r/PrintConfig.hpp"
 
 using namespace Slic3r;
 namespace fs = boost::filesystem;

src/libslic3r/Algorithm/RegionExpansion.cpp

@@ -20,7 +20,6 @@
 #include <numeric>
 #include <vector>
 #include <utility>
-#include "libslic3r/BoundingBox.hpp"
 
 namespace Slic3r {
 namespace Algorithm {

src/libslic3r/Arachne/SkeletalTrapezoidation.cpp

@@ -28,8 +28,6 @@
 #include "libslic3r/Arachne/SkeletalTrapezoidationJoint.hpp"
 #include "libslic3r/Arachne/utils/ExtrusionJunction.hpp"
 #include "libslic3r/Arachne/utils/ExtrusionLine.hpp"
-#include "libslic3r/Arachne/SkeletalTrapezoidationGraph.hpp"
-#include "libslic3r/Arachne/utils/PolygonsSegmentIndex.hpp"
 
 #ifndef NDEBUG
     #include "libslic3r/EdgeGrid.hpp"

src/libslic3r/Arachne/SkeletalTrapezoidation.hpp

@@ -11,6 +11,7 @@
 #include <list>
 #include <vector>
 
+#include "utils/HalfEdgeGraph.hpp"
 #include "utils/PolygonsSegmentIndex.hpp"
 #include "utils/ExtrusionJunction.hpp"
 #include "utils/ExtrusionLine.hpp"

src/libslic3r/Arachne/WallToolPaths.hpp

@@ -11,6 +11,7 @@
 #include <vector>
 #include <utility>
 
+#include "BeadingStrategy/BeadingStrategyFactory.hpp"
 #include "libslic3r/libslic3r.h"
 #include "libslic3r/Point.hpp"
 #include "utils/ExtrusionLine.hpp"

src/libslic3r/Arachne/utils/ExtrusionLine.cpp

@@ -14,6 +14,7 @@
 #include "libslic3r/libslic3r.h"
 #include "libslic3r/Point.hpp"
 #include "libslic3r/Arachne/utils/ExtrusionJunction.hpp"
+#include "libslic3r/BoundingBox.hpp"
 #include "libslic3r/ExtrusionEntity.hpp"
 #include "libslic3r/Line.hpp"
 #include "libslic3r/Polygon.hpp"

src/libslic3r/Arachne/utils/ExtrusionLine.hpp

@@ -19,7 +19,9 @@
 #include "ExtrusionJunction.hpp"
 #include "../../Polyline.hpp"
 #include "../../Polygon.hpp"
+#include "../../BoundingBox.hpp"
 #include "../../ExtrusionEntity.hpp"
+#include "../../Flow.hpp"
 #include "libslic3r/libslic3r.h"
 #include "libslic3r/Point.hpp"
 

src/libslic3r/Arachne/utils/PolylineStitcher.hpp

@@ -15,6 +15,7 @@
 
 #include "SparsePointGrid.hpp"
 #include "PolygonsPointIndex.hpp"
+#include "../../Polygon.hpp"
 #include "libslic3r/Point.hpp"
 #include "libslic3r/libslic3r.h"
 

src/libslic3r/Arrange.cpp

@@ -29,6 +29,7 @@
 #include <libnest2d/utils/rotcalipers.hpp>
 
 #include <numeric>
+#include <ClipperUtils.hpp>
 
 #include <boost/geometry/index/rtree.hpp>
 #include <utility>
@@ -44,7 +45,6 @@
 #include <boost/log/trivial.hpp>
 #include <boost/multiprecision/integer.hpp>
 #include <boost/rational.hpp>
-#include "MultiMaterialSegmentation.hpp"
 
 namespace libnest2d {
 #if !defined(_MSC_VER) && defined(__SIZEOF_INT128__) && !defined(__APPLE__)

src/libslic3r/Brim.cpp

@@ -32,11 +32,6 @@
 #include <boost/log/trivial.hpp>
 #include <utility>
 #include <vector>
-#include "Config.hpp"
-#include "ExtrusionEntityCollection.hpp"
-#include "MultiMaterialSegmentation.hpp"
-#include "SurfaceCollection.hpp"
-#include "TriangleMesh.hpp"
 
 #ifndef NDEBUG
     // #define BRIM_DEBUG_TO_SVG

src/libslic3r/CAD/CadDocument.cpp

@@ -90,10 +90,6 @@
 #include <string>
 #include <vector>
 #include <utility>
-#include "libslic3r/Color.hpp"
-#include "libslic3r/TriangleMesh.hpp"
-
-class Geom2d_TrimmedCurve;
 
 namespace Slic3r {
 

src/libslic3r/CAD/SketchEngine.cpp

@@ -62,8 +62,6 @@
 #include <vector>
 #include <utility>
 
-class Geom_TrimmedCurve;
-
 namespace Slic3r {
 
 // Single source of truth for the weld tolerance the viewport and the kernel share.

src/libslic3r/CAD/SketchSolver.cpp

@@ -11,7 +11,6 @@
 #include <unordered_map>
 #include <vector>
 #include <utility>
-#include "libslic3r/Point.hpp"
 
 namespace Slic3r {
 

src/libslic3r/CAD/SketchSolver.hpp

@@ -6,12 +6,9 @@
 // hand-rolled SketchConstraints: full constraint set, real DoF counting, and
 // over-constrained (bad-constraint) detection. Solves on a fixed 2D XY workplane.
 
+#include "libslic3r/CAD/SketchEngine.hpp"
 #include <vector>
 
-namespace Slic3r { enum class SketchPointRole; }
-namespace Slic3r { struct SketchEntity; }
-namespace Slic3r { struct SketchEntityConstraintDef; }
-
 namespace Slic3r {
 
 struct SketchSolveResult {

src/libslic3r/Circle.cpp

@@ -5,8 +5,10 @@
 #include <cstddef>
 #include <utility>
 #include <math.h>
+#include "Geometry.hpp"
 #include "Point.hpp"
 #include "Line.hpp"
+#include "Polygon.hpp"
 #include "libslic3r.h"
 
 

src/libslic3r/Circle.hpp

@@ -2,11 +2,10 @@
 #define slic3r_Circle_hpp_
 
 #include "Point.hpp"
+#include "Line.hpp"
 #include "libslic3r.h"
 #include <cmath>
 
-namespace Slic3r { class Line; }
-
 namespace Slic3r {
 
 constexpr double ZERO_TOLERANCE = 0.000005;

src/libslic3r/ClipperUtils.cpp

@@ -12,6 +12,7 @@
 #include "ClipperUtils.hpp"
 #include "BoundingBox.hpp"
 #include "ExPolygon.hpp"
+#include "Geometry.hpp"
 #include "Point.hpp"
 #include "Polygon.hpp"
 #include "Polyline.hpp"
@@ -23,7 +24,6 @@
 #include <clipper2/clipper.h>
 #include <utility>
 #include <vector>
-#include "ExtrusionEntity.hpp"
 
 // #define CLIPPER_UTILS_DEBUG
 

src/libslic3r/ClipperZUtils.cpp

@@ -3,7 +3,6 @@
 
 #include <clipper2/clipper2_z.hpp>
 #include <cstddef>
-#include "Point.hpp"
 
 namespace Slic3r {
 namespace ClipperZUtils {

src/libslic3r/ClipperZUtils.hpp

@@ -13,7 +13,6 @@
 #include <libslic3r/ClipperUtils.hpp>
 #include <libslic3r/Point.hpp>
 #include <libslic3r/ExPolygon.hpp>
-#include "Polygon.hpp"
 
 namespace Slic3r {
 

src/libslic3r/ContourZ.cpp

@@ -14,9 +14,6 @@
 #include <math.h>
 #include <string>
 #include <utility>
-#include "Config.hpp"
-#include "Polyline.hpp"
-#include "PrintConfig.hpp"
 
 namespace Slic3r {
 

src/libslic3r/CustomGCode.cpp

@@ -1,4 +1,7 @@
 #include "CustomGCode.hpp"
+#include "Config.hpp"
+#include "GCode.hpp"
+#include "GCodeWriter.hpp"
 #include <vector>
 #include <utility>
 #include <cstddef>

src/libslic3r/CutSurface.hpp

@@ -6,9 +6,7 @@
 #include <vector>
 #include <admesh/stl.h> // indexed_triangle_set
 #include "ExPolygon.hpp"
-
-namespace Slic3r::Emboss { class IProject3d; }
-namespace Slic3r::Emboss { class IProjection; }
+#include "Emboss.hpp" // IProjection
 
 namespace Slic3r{
 

src/libslic3r/CutUtils.cpp

@@ -19,7 +19,6 @@
 #include <optional>
 #include <math.h>
 #include <cmath>
-#include "BoundingBox.hpp"
 
 namespace Slic3r {
 

src/libslic3r/ElephantFootCompensation.cpp

@@ -8,6 +8,7 @@
 #include "ElephantFootCompensation.hpp"
 #include "Flow.hpp"
 #include "Geometry.hpp"
+#include "SVG.hpp"
 #include "Utils.hpp"
 
 #include <algorithm>
@@ -18,7 +19,6 @@
 #include <utility>
 #include <math.h>
 #include <limits>
-#include "ExtrusionEntity.hpp"
 
 // #define CONTOUR_DISTANCE_DEBUG_SVG
 

src/libslic3r/ElephantFootCompensation.hpp

@@ -1,6 +1,7 @@
 #ifndef slic3r_ElephantFootCompensation_hpp_
 #define slic3r_ElephantFootCompensation_hpp_
 
+#include "libslic3r.h"
 #include "ExPolygon.hpp"
 #include <vector>
 

src/libslic3r/ExPolygon.cpp

@@ -1,5 +1,6 @@
 #include "BoundingBox.hpp"
 #include "ExPolygon.hpp"
+#include "Exception.hpp"
 #include "Geometry/MedialAxis.hpp"
 #include "Point.hpp"
 #include "MultiPoint.hpp"
@@ -7,6 +8,7 @@
 #include "Line.hpp"
 #include "ClipperUtils.hpp"
 #include "Polyline.hpp"
+#include "SVG.hpp"
 #include "libslic3r.h"
 #include <algorithm>
 #include <cassert>

src/libslic3r/ExPolygonsIndex.cpp

@@ -5,7 +5,6 @@
 #include <vector>
 #include <utility>
 #include <algorithm>
-#include "Polygon.hpp"
 using namespace Slic3r;
 
 // IMPROVE: use one dimensional vector for polygons offset with searching by std::lower_bound

src/libslic3r/Extruder.cpp

@@ -6,7 +6,6 @@
 #include <cassert>
 #include <algorithm>
 #include <cmath>
-#include "Config.hpp"
 
 namespace Slic3r {
 

src/libslic3r/Extruder.hpp

@@ -2,6 +2,7 @@
 #define slic3r_Extruder_hpp_
 
 #include "libslic3r.h"
+#include "Point.hpp"
 #include <vector>
 
 namespace Slic3r {

src/libslic3r/ExtrusionEntity.cpp

@@ -2,6 +2,7 @@
 #include "ExtrusionEntityCollection.hpp"
 #include "ExPolygon.hpp"
 #include "ClipperUtils.hpp"
+#include "Extruder.hpp"
 #include "Flow.hpp"
 #include <algorithm>
 #include <cassert>
@@ -20,7 +21,6 @@
 #include <string_view>
 #include "Utils.hpp"
 #include "libslic3r.h"
-#include "ArcFitter.hpp"
 
 #define L(s) (s)
 

src/libslic3r/ExtrusionSimulator.cpp

@@ -25,7 +25,6 @@
 #include "ExtrusionEntity.hpp"
 #include "libslic3r.h"
 #include "ExtrusionSimulator.hpp"
-#include "Polyline.hpp"
 
 #ifndef M_PI
 #define M_PI 3.1415926535897932384626433832795

src/libslic3r/ExtrusionSimulator.hpp

@@ -2,6 +2,7 @@
 #define slic3r_ExtrusionSimulator_hpp_
 
 #include "Point.hpp"
+#include "libslic3r.h"
 #include "ExtrusionEntity.hpp"
 #include "BoundingBox.hpp"
 

src/libslic3r/FaceDetector.cpp

@@ -2,6 +2,7 @@
 #include "BoundingBox.hpp"
 #include "TriangleMesh.hpp"
 #include "SLA/IndexedMesh.hpp"
+#include "Model.hpp"
 #include <cstdint>
 #include <cstddef>
 #include <unordered_set>

src/libslic3r/Feature/FuzzySkin/FuzzySkin.hpp

@@ -5,12 +5,10 @@
 #include "libslic3r/libslic3r.h"
 #include "libslic3r/Polygon.hpp"
 #include "libslic3r/Arachne/utils/ExtrusionJunction.hpp"
+#include "libslic3r/Arachne/utils/ExtrusionLine.hpp"
+#include "libslic3r/PerimeterGenerator.hpp"
 #include <cstddef>
 
-namespace Slic3r { class PerimeterGenerator; }
-namespace Slic3r { struct FuzzySkinConfig; }
-namespace Slic3r::Arachne { struct ExtrusionLine; }
-
 namespace Slic3r::Feature::FuzzySkin {
 
 void fuzzy_polyline(Points& poly, bool closed, coordf_t slice_z, const FuzzySkinConfig& cfg);

src/libslic3r/Feature/Interlocking/InterlockingGenerator.cpp

@@ -18,10 +18,6 @@
 #include <algorithm>
 #include <unordered_set>
 #include <vector>
-#include "libslic3r/Config.hpp"
-#include "libslic3r/Print.hpp"
-#include "libslic3r/PrintConfig.hpp"
-#include "libslic3r/SurfaceCollection.hpp"
 
 namespace std {
 template<> struct hash<Slic3r::GridPoint3>

src/libslic3r/Feature/Interlocking/InterlockingGenerator.hpp

@@ -6,15 +6,14 @@
 
 #include "libslic3r/libslic3r.h"
 #include "libslic3r/Point.hpp"
+#include "libslic3r/ExPolygon.hpp"
+#include "libslic3r/Print.hpp"
 #include "VoxelUtils.hpp"
 #include <functional>
 #include <cstddef>
 #include <utility>
 #include <unordered_set>
 #include <vector>
-#include "libslic3r/MultiMaterialSegmentation.hpp"
-
-namespace Slic3r { class PrintObject; }
 
 namespace Slic3r {
 

src/libslic3r/Feature/Interlocking/VoxelUtils.cpp

@@ -10,13 +10,13 @@
 #include "libslic3r/PrintConfig.hpp"
 #include "libslic3r/Polyline.hpp"
 #include "libslic3r/Geometry.hpp"
+#include "libslic3r/Fill/FillRectilinear.hpp"
 #include "libslic3r/Surface.hpp"
 #include <functional>
 #include <limits>
 #include <cassert>
 #include <memory>
 #include <utility>
-#include "libslic3r/BoundingBox.hpp"
 
 namespace Slic3r
 {

src/libslic3r/Fill/Fill.cpp

@@ -41,13 +41,6 @@
 #include "libslic3r/Polygon.hpp"
 #include "libslic3r/Polyline.hpp"
 #include "libslic3r.h"
-#include "libslic3r/ExtrusionEntityCollection.hpp"
-#include "libslic3r/MultiMaterialSegmentation.hpp"
-#include "libslic3r/Slicing.hpp"
-#include "libslic3r/SurfaceCollection.hpp"
-
-namespace Slic3r::FillAdaptive { struct Octree; }
-namespace Slic3r::FillLightning { class Generator; }
 
 namespace Slic3r {
 

src/libslic3r/Fill/Fill3DHoneycomb.cpp

@@ -16,7 +16,6 @@
 #include "libslic3r/Polyline.hpp"
 #include <utility>
 #include "Fill3DHoneycomb.hpp"
-#include "libslic3r/Polygon.hpp"
 
 namespace Slic3r {
 

src/libslic3r/Fill/Fill3DHoneycomb.hpp

@@ -11,8 +11,6 @@
 #include "libslic3r/Point.hpp"
 #include "libslic3r/Polyline.hpp"
 
-namespace Slic3r { class Point; }
-
 namespace Slic3r {
 
 class Fill3DHoneycomb : public Fill

src/libslic3r/Fill/FillAdaptive.cpp

@@ -49,9 +49,6 @@
 #include <boost/geometry/geometries/point.hpp>
 #include <boost/geometry/geometries/segment.hpp>
 #include <boost/geometry/index/rtree.hpp>
-#include "libslic3r/Config.hpp"
-#include "libslic3r/Polygon.hpp"
-#include "libslic3r/SurfaceCollection.hpp"
 
 
 namespace Slic3r {

src/libslic3r/Fill/FillBase.cpp

@@ -48,7 +48,6 @@
 #include "libslic3r/Line.hpp"
 #include "libslic3r/Polygon.hpp"
 #include "libslic3r/Utils.hpp"
-#include "libslic3r/Flow.hpp"
 // #define INFILL_DEBUG_OUTPUT
 
 namespace Slic3r {

src/libslic3r/Fill/FillBase.hpp

@@ -24,11 +24,10 @@
 #include "../PrintConfig.hpp"
 #include "../Flow.hpp"
 #include "../ExtrusionEntity.hpp"
+#include "../ExtrusionEntityCollection.hpp"
+#include "../ShortestPath.hpp"
 #include "libslic3r/Polyline.hpp"
 #include "libslic3r/Polygon.hpp"
-#include "libslic3r/Point.hpp"
-
-namespace Slic3r { class ExtrusionEntityCollection; }
 
 namespace Slic3r {
 

src/libslic3r/Fill/FillConcentric.cpp

@@ -20,7 +20,6 @@
 #include <libslic3r/ShortestPath.hpp>
 #include <utility>
 #include <vector>
-#include "libslic3r/ExtrusionEntity.hpp"
 
 namespace Slic3r {
 

src/libslic3r/Fill/FillConcentric.hpp

@@ -4,10 +4,9 @@
 #include "libslic3r/ExPolygon.hpp"
 #include "FillBase.hpp"
 #include <utility>
+#include "libslic3r/Point.hpp"
 #include "libslic3r/Polyline.hpp"
 
-namespace Slic3r { class Point; }
-
 namespace Slic3r {
 
 class FillConcentric : public Fill

src/libslic3r/Fill/FillConcentricInternal.cpp

@@ -19,11 +19,6 @@
 #include <libslic3r/ShortestPath.hpp>
 #include <vector>
 #include <utility>
-#include "libslic3r/BoundingBox.hpp"
-#include "libslic3r/Flow.hpp"
-#include "libslic3r/PrintConfig.hpp"
-
-namespace Slic3r { class Surface; }
 
 namespace Slic3r {
 

src/libslic3r/Fill/FillConcentricInternal.hpp

@@ -4,8 +4,6 @@
 #include "libslic3r/ExtrusionEntity.hpp"
 #include "FillBase.hpp"
 
-namespace Slic3r { class Surface; }
-
 namespace Slic3r {
 
 class FillConcentricInternal : public Fill

src/libslic3r/Fill/FillCornerSmoothing.hpp

@@ -7,6 +7,7 @@
 #include <utility>
 #include <vector>
 
+#include "../libslic3r.h"
 #include "../Point.hpp"
 #include "../Polygon.hpp"
 #include "../Polyline.hpp"

src/libslic3r/Fill/FillCrossHatch.cpp

@@ -1,4 +1,6 @@
 #include "../ClipperUtils.hpp"
+#include "../ShortestPath.hpp"
+#include "../Surface.hpp"
 #include <algorithm>
 #include <cmath>
 #include <cstddef>
@@ -11,7 +13,6 @@
 #include "libslic3r/libslic3r.h"
 #include "libslic3r/Polyline.hpp"
 #include "FillCrossHatch.hpp"
-#include "libslic3r/Polygon.hpp"
 
 namespace Slic3r {
 

src/libslic3r/Fill/FillCrossHatch.hpp

@@ -4,13 +4,13 @@
 #include <map>
 #include <utility>
 
+#include "../libslic3r.h"
 
 #include "libslic3r/ExPolygon.hpp"
 #include "FillBase.hpp"
+#include "libslic3r/Point.hpp"
 #include "libslic3r/Polyline.hpp"
 
-namespace Slic3r { class Point; }
-
 namespace Slic3r {
 
 class FillCrossHatch : public Fill

src/libslic3r/Fill/FillGyroid.cpp

@@ -1,5 +1,7 @@
 #include "../ClipperUtils.hpp"
 #include "../MarchingSquares.hpp"
+#include "../ShortestPath.hpp"
+#include "../Surface.hpp"
 #include <cmath>
 #include <algorithm>
 #include <cstddef>
@@ -16,7 +18,6 @@
 #include "libslic3r/libslic3r.h"
 #include "libslic3r/Polyline.hpp"
 #include "FillGyroid.hpp"
-#include "libslic3r/Polygon.hpp"
 
 // ---------------------------------------------------------------------------
 // Marching-squares scalar field for the optimized gyroid branch.

src/libslic3r/Fill/FillGyroid.hpp

@@ -1,14 +1,14 @@
 #ifndef slic3r_FillGyroid_hpp_
 #define slic3r_FillGyroid_hpp_
 
+#include "../libslic3r.h"
 
 #include "libslic3r/ExPolygon.hpp"
 #include "FillBase.hpp"
 #include <utility>
+#include "libslic3r/Point.hpp"
 #include "libslic3r/Polyline.hpp"
 
-namespace Slic3r { class Point; }
-
 namespace Slic3r {
 
 class FillGyroid : public Fill

src/libslic3r/Fill/FillHoneycomb.cpp

@@ -1,4 +1,6 @@
 #include "../ClipperUtils.hpp"
+#include "../ShortestPath.hpp"
+#include "../Surface.hpp"
 
 #include "libslic3r/Fill/FillBase.hpp"
 #include "libslic3r/ExPolygon.hpp"
@@ -12,7 +14,6 @@
 #include <cstddef>
 #include <algorithm>
 #include "FillHoneycomb.hpp"
-#include "libslic3r/Polygon.hpp"
 
 namespace Slic3r {
 

src/libslic3r/Fill/FillLightning.cpp

@@ -1,5 +1,6 @@
 #include "../ClipperUtils.hpp"
 #include "../Print.hpp"
+#include "../ShortestPath.hpp"
 #include "libslic3r/ExPolygon.hpp"
 #include "libslic3r/Fill/Lightning/Layer.hpp"
 #include "FillBase.hpp"

src/libslic3r/Fill/FillLightning.hpp

@@ -6,10 +6,9 @@
 #include <memory>
 #include <functional>
 #include <utility>
+#include "libslic3r/Point.hpp"
 #include "libslic3r/Polyline.hpp"
 
-namespace Slic3r { class Point; }
-
 namespace Slic3r {
 
 class PrintObject;

src/libslic3r/Fill/FillLine.cpp

@@ -1,6 +1,7 @@
 #include "../ClipperUtils.hpp"
 #include "../ExPolygon.hpp"
 #include "../ShortestPath.hpp"
+#include "../Surface.hpp"
 #include "libslic3r/Fill/FillBase.hpp"
 #include <utility>
 #include "libslic3r/Point.hpp"
@@ -14,8 +15,6 @@
 #include <cstdlib>
 
 #include "FillLine.hpp"
-#include "libslic3r/ExtrusionEntity.hpp"
-#include "libslic3r/Polygon.hpp"
 
 namespace Slic3r {
 

src/libslic3r/Fill/FillPlanePath.cpp

@@ -1,5 +1,6 @@
 #include "../ClipperUtils.hpp"
 #include "../ShortestPath.hpp"
+#include "../Surface.hpp"
 
 #include "libslic3r/BoundingBox.hpp"
 #include "libslic3r/Fill/FillBase.hpp"
@@ -17,7 +18,6 @@
 #include <cstddef>
 #include <type_traits>
 #include "FillPlanePath.hpp"
-#include "libslic3r/Config.hpp"
 
 namespace Slic3r {
 

src/libslic3r/Fill/FillRectilinear.cpp

@@ -24,6 +24,7 @@
 #include "../Geometry.hpp"
 #include "../Surface.hpp"
 #include "../ShortestPath.hpp"
+#include "../VariableWidth.hpp"
 
 #include "libslic3r/BoundingBox.hpp"
 #include "libslic3r/Fill/FillBase.hpp"

src/libslic3r/Fill/FillRectilinear.hpp

@@ -12,11 +12,10 @@
 #include <cstddef>
 #include <vector>
 #include <utility>
+#include "libslic3r/Flow.hpp"
 #include "libslic3r/Point.hpp"
 #include "libslic3r/Polygon.hpp"
 
-namespace Slic3r { class Flow; }
-
 namespace Slic3r {
 
 class PrintRegionConfig;

src/libslic3r/Fill/FillSpiralInset.cpp

@@ -1,5 +1,7 @@
 #include "../ClipperUtils.hpp"
 #include "../ExPolygon.hpp"
+#include "../Surface.hpp"
+#include "../VariableWidth.hpp"
 #include "Arachne/WallToolPaths.hpp"
 #include "libslic3r/Polygon.hpp"
 #include "libslic3r/Point.hpp"
@@ -20,9 +22,6 @@
 #include <math.h>
 #include <utility>
 #include <vector>
-#include "libslic3r/Arachne/utils/ExtrusionJunction.hpp"
-#include "libslic3r/ExtrusionEntity.hpp"
-#include "libslic3r/Line.hpp"
 
 namespace Slic3r {
 

src/libslic3r/Fill/FillSpiralInset.hpp

@@ -4,10 +4,9 @@
 #include "libslic3r/ExPolygon.hpp"
 #include "FillBase.hpp"
 #include <utility>
+#include "libslic3r/Point.hpp"
 #include "libslic3r/Polyline.hpp"
 
-namespace Slic3r { class Point; }
-
 namespace Slic3r {
 
 class FillSpiralInset : public Fill

src/libslic3r/Fill/FillTpmsD.hpp

@@ -3,6 +3,7 @@
 
 #include <utility>
 
+#include "libslic3r/libslic3r.h"
 #include "FillBase.hpp"
 #include "libslic3r/ExPolygon.hpp"
 #include "libslic3r/Polyline.hpp"

src/libslic3r/Fill/FillTpmsFK.cpp

@@ -16,7 +16,6 @@
 #include <unordered_map>
 #include <unordered_set>
 #include <utility>
-#include "libslic3r/Polygon.hpp"
 
 namespace marchsq {
 using namespace Slic3r;

src/libslic3r/Fill/FillTpmsFK.hpp

@@ -3,6 +3,7 @@
 
 #include <utility>
 
+#include "libslic3r/libslic3r.h"
 #include "FillBase.hpp"
 #include "libslic3r/ExPolygon.hpp"
 #include "libslic3r/Polyline.hpp"

src/libslic3r/Fill/Lightning/Generator.cpp

@@ -30,9 +30,6 @@
 #include <cmath>
 #include <utility>
 #include <cassert>
-#include "libslic3r/Config.hpp"
-#include "libslic3r/MultiMaterialSegmentation.hpp"
-#include "libslic3r/SurfaceCollection.hpp"
 
 /* Possible future tasks/optimizations,etc.:
  * - Improve connecting heuristic to favor connecting to shorter trees

src/libslic3r/Fill/Lightning/Layer.cpp

@@ -14,6 +14,7 @@
 
 #include "../../ClipperUtils.hpp"
 #include "../../Geometry.hpp"
+#include "Utils.hpp"
 #include "libslic3r/libslic3r.h"
 
 #include <cassert>

src/libslic3r/Fill/Lightning/TreeNode.hpp

@@ -19,7 +19,6 @@
 #include "libslic3r/BoundingBox.hpp"
 #include "SVG.hpp"
 #include "libslic3r/libslic3r.h"
-#include "libslic3r/Line.hpp"
 
 //#define LIGHTNING_TREE_NODE_DEBUG_OUTPUT
 

src/libslic3r/Flow.cpp

@@ -1,6 +1,7 @@
 #include "Flow.hpp"
 #include "Exception.hpp"
 #include "Config.hpp"
+#include "I18N.hpp"
 #include "Print.hpp"
 #include "libslic3r.h"
 #include <cmath>
@@ -9,7 +10,6 @@
 #include <boost/algorithm/string/predicate.hpp>
 #include <string>
 #include <math.h>
-#include "PrintConfig.hpp"
 
 // Mark string for localization and translate.
 #define L(s) Slic3r::I18N::translate(s)

src/libslic3r/FlushVolCalc.cpp

@@ -4,6 +4,7 @@
 #include <math.h>
 #include "FlushVolPredictor.hpp"
 #include "slic3r/Utils/ColorSpaceConvert.hpp"
+#include "Utils.hpp"
 #include "FlushVolCalc.hpp"
 
 

src/libslic3r/Format/3mf.cpp

@@ -3,9 +3,11 @@
 #include "../Model.hpp"
 #include "../Utils.hpp"
 #include "../LocalesUtils.hpp"
+#include "../GCode.hpp"
 #include "../Geometry.hpp"
 #include "../GCode/ThumbnailData.hpp"
 #include "../Semver.hpp"
+#include "../Time.hpp"
 
 #include "../I18N.hpp"
 #include "libslic3r/Point.hpp"

src/libslic3r/Format/AMF.cpp

@@ -12,10 +12,17 @@
 
 #include <boost/nowide/cstdio.hpp>
 
+#include "../libslic3r.h"
 #include "../Exception.hpp"
 #include "../Model.hpp"
+#include "../GCode.hpp"
+#include "../PrintConfig.hpp"
+#include "../Utils.hpp"
+#include "../I18N.hpp"
 #include "../Geometry.hpp"
+#include "../CustomGCode.hpp"
 #include "../LocalesUtils.hpp"
+#include "libslic3r/Config.hpp"
 #include "libslic3r/Point.hpp"
 #include "libslic3r/TriangleMesh.hpp"
 

src/libslic3r/Format/OBJ.cpp

@@ -1,3 +1,4 @@
+#include "../libslic3r.h"
 #include "../Model.hpp"
 #include "../TriangleMesh.hpp"
 #include "../TexturePainting.hpp"

src/libslic3r/Format/SL1.cpp

@@ -1,6 +1,7 @@
 #include "SL1.hpp"
 #include "libslic3r/ExPolygon.hpp"
 #include "libslic3r/Config.hpp"
+#include "GCode/ThumbnailData.hpp"
 #include "libslic3r/libslic3r.h"
 #include "libslic3r/Polygon.hpp"
 #include "libslic3r/Point.hpp"
@@ -34,6 +35,7 @@
 #include "libslic3r/SlicesToTriangleMesh.hpp"
 #include "libslic3r/MarchingSquares.hpp"
 #include "libslic3r/ClipperUtils.hpp"
+#include "libslic3r/MTUtils.hpp"
 #include "libslic3r/PrintConfig.hpp"
 #include "libslic3r/SLA/RasterBase.hpp"
 #include "libslic3r/miniz_extension.hpp"
@@ -48,7 +50,6 @@
 #include <string>
 #include <utility>
 #include <string_view>
-#include "libslic3r/SLA/Pad.hpp"
 
 namespace marchsq {
 

src/libslic3r/Format/STEP.cpp

@@ -1,3 +1,4 @@
+#include "../libslic3r.h"
 #include "../Model.hpp"
 #include "../TriangleMesh.hpp"
 #include "libslic3r/Exception.hpp"

src/libslic3r/Format/STL.cpp

@@ -1,3 +1,4 @@
+#include "../libslic3r.h"
 #include "../Model.hpp"
 #include "../TriangleMesh.hpp"
 

src/libslic3r/Format/bbs_3mf.cpp

@@ -9,6 +9,7 @@
 #include "../Geometry.hpp"
 #include "../GCode/ThumbnailData.hpp"
 #include "../Semver.hpp"
+#include "../Time.hpp"
 
 #include "../I18N.hpp"
 #include "libslic3r/Point.hpp"
@@ -112,7 +113,6 @@ namespace pt = boost::property_tree;
 #include "NSVGUtils.hpp"
 
 #include <fast_float/fast_float.h>
-#include "libslic3r/ProjectTask.hpp"
 
 // Slightly faster than sprintf("%.9g"), but there is an issue with the karma floating point formatter,
 // https://github.com/boostorg/spirit/pull/586

src/libslic3r/Format/svg.cpp

@@ -37,7 +37,6 @@
 #include "TopoDS.hxx"
 #include "BRepExtrema_SelfIntersection.hxx"
 #include "libslic3r/Polygon.hpp"
-#include "libslic3r/Polyline.hpp"
 
 namespace Slic3r {
 const double STEP_TRANS_CHORD_ERROR = 0.005;

src/libslic3r/GCode.cpp

@@ -120,6 +120,7 @@
 
 #include <Shiny/Shiny.h>
 
+#include "miniz_extension.hpp"
 
 using namespace std::literals::string_view_literals;
 
@@ -131,14 +132,6 @@ using namespace std::literals::string_view_literals;
 #endif
 
 #include <assert.h>
-#include "AABBTreeLines.hpp"
-#include "Extruder.hpp"
-#include "ExtrusionEntityCollection.hpp"
-#include "FilamentMixer.hpp"
-#include "Format/STEP.hpp"
-#include "Model.hpp"
-#include "MultiNozzleUtils.hpp"
-#include "Slicing.hpp"
 
 namespace fs = boost::filesystem;
 

src/libslic3r/GCode.hpp

@@ -4,8 +4,10 @@
 #include "ExtrusionEntity.hpp"
 #include "Polygon.hpp"
 #include "Config.hpp"
+#include "ExtrusionEntityCollection.hpp"
 #include "Print.hpp"
 #include "libslic3r.h"
+#include "ExPolygon.hpp"
 #include "GCodeWriter.hpp"
 #include "Layer.hpp"
 #include "Point.hpp"
@@ -20,6 +22,7 @@
 #include "GCode/WipeTower.hpp"
 #include "GCode/SeamPlacer.hpp"
 #include "GCode/GCodeProcessor.hpp"
+#include "EdgeGrid.hpp"
 #include "GCode/ThumbnailData.hpp"
 #include "libslic3r/ObjectID.hpp"
 #include "GCode/ExtrusionProcessor.hpp"
@@ -45,10 +48,6 @@
 #include <cfloat>
 #include <vector>
 #include <utility>
-#include "BoundingBox.hpp"
-#include "Polyline.hpp"
-
-namespace Slic3r { class ExtrusionEntityCollection; }
 
 namespace Slic3r {
 

src/libslic3r/GCode/AdaptivePAProcessor.cpp

@@ -19,9 +19,6 @@
 #include <cctype>
 #include <string>
 #include <utility>
-#include "libslic3r/Config.hpp"
-#include "libslic3r/GCodeWriter.hpp"
-#include "libslic3r/PrintConfig.hpp"
 
 namespace Slic3r {
 

src/libslic3r/GCode/AvoidCrossingPerimeters.cpp

@@ -6,6 +6,7 @@
 #include "../ExPolygon.hpp"
 #include "../Geometry.hpp"
 #include "../ClipperUtils.hpp"
+#include "../SVG.hpp"
 #include "libslic3r/Line.hpp"
 #include "libslic3r/libslic3r.h"
 #include "libslic3r/Point.hpp"
@@ -30,10 +31,6 @@
 #include <boost/range/adaptor/reversed.hpp>
 #include <vector>
 #include <utility>
-#include "libslic3r/Extruder.hpp"
-#include "libslic3r/GCodeWriter.hpp"
-#include "libslic3r/PrintConfig.hpp"
-#include "libslic3r/SurfaceCollection.hpp"
 
 namespace Slic3r {
 

src/libslic3r/GCode/AvoidCrossingPerimeters.hpp

@@ -1,13 +1,13 @@
 #ifndef slic3r_AvoidCrossingPerimeters_hpp_
 #define slic3r_AvoidCrossingPerimeters_hpp_
 
+#include "../libslic3r.h"
 #include "../ExPolygon.hpp"
 #include "../EdgeGrid.hpp"
 #include "libslic3r/Polyline.hpp"
 #include "libslic3r/Polygon.hpp"
 #include "libslic3r/BoundingBox.hpp"
 #include <vector>
-#include "libslic3r/MultiMaterialSegmentation.hpp"
 
 namespace Slic3r {
 

src/libslic3r/GCode/ConflictChecker.cpp

@@ -23,7 +23,6 @@
 #include <atomic>
 #include <utility>
 #include <vector>
-#include "libslic3r/Model.hpp"
 
 namespace Slic3r {
 

src/libslic3r/GCode/ConflictChecker.hpp

@@ -1,12 +1,15 @@
 #ifndef slic3r_ConflictChecker_hpp_
 #define slic3r_ConflictChecker_hpp_
 
+#include "../Utils.hpp"
+#include "../Model.hpp"
 #include "../Print.hpp"
 #include "../Layer.hpp"
 #include "libslic3r/Line.hpp"
 #include "libslic3r/ExtrusionEntity.hpp"
 #include "libslic3r/Point.hpp"
 #include "libslic3r/Polyline.hpp"
+#include "libslic3r/ExtrusionEntityCollection.hpp"
 #include "libslic3r/GCode/GCodeProcessor.hpp"
 
 #include <queue>
@@ -17,8 +20,6 @@
 #include <vector>
 #include <optional>
 
-namespace Slic3r { class ExtrusionEntityCollection; }
-
 namespace Slic3r {
 
 struct LineWithID

src/libslic3r/GCode/CoolingBuffer.cpp

@@ -30,9 +30,6 @@
 #endif
 
 #include <assert.h>
-#include "libslic3r/Config.hpp"
-#include "libslic3r/GCodeWriter.hpp"
-#include "libslic3r/PrintConfig.hpp"
 
 namespace Slic3r {
 

src/libslic3r/GCode/CoolingBuffer.hpp

@@ -1,6 +1,7 @@
 #ifndef slic3r_CoolingBuffer_hpp_
 #define slic3r_CoolingBuffer_hpp_
 
+#include "../libslic3r.h"
 #include "../Point.hpp"
 #include <cstddef>
 #include <map>

src/libslic3r/GCode/FanMover.cpp

@@ -33,8 +33,6 @@
 #include <boost/log/trivial.hpp>
 #include <string>
 #include <string_view>
-#include "libslic3r/Config.hpp"
-#include "libslic3r/GCodeWriter.hpp"
 */
 
 

src/libslic3r/GCode/FanMover.hpp

@@ -2,8 +2,11 @@
 #define slic3r_GCode_FanMover_hpp_
 
 
+#include "../libslic3r.h"
+#include "../PrintConfig.hpp"
 #include "../ExtrusionEntity.hpp"
 
+#include "../Point.hpp"
 #include "../GCodeReader.hpp"
 #include "../GCodeWriter.hpp"
 #include <cstdint>

src/libslic3r/GCode/GCodeProcessor.cpp

@@ -1,9 +1,9 @@
-#include "libslic3r/ArcFitter.hpp"
 #include "libslic3r/Config.hpp"
 #include "libslic3r/CustomGCode.hpp"
 #include "libslic3r/Exception.hpp"
 #include "libslic3r/BoundingBox.hpp"
 #include "libslic3r/CommonDefs.hpp"
+#include "libslic3r/ArcFitter.hpp"
 #include "ExtrusionEntity.hpp"
 #include "libslic3r/GCodeReader.hpp"
 #include "GCodeWriter.hpp"
@@ -73,7 +73,6 @@
 #include <chrono>
 
 #include "Geometry/ArcWelder.hpp"
-#include "libslic3r/MultiNozzleUtils.hpp"
 
 static const float DEFAULT_TOOLPATH_WIDTH = 0.4f;
 static const float DEFAULT_TOOLPATH_HEIGHT = 0.2f;

src/libslic3r/GCode/OrderingStrategies.cpp

@@ -17,7 +17,6 @@
 #include <unordered_map>
 #include <utility>
 #include <vector>
-#include "libslic3r/Print.hpp"
 
 namespace Slic3r {
 

src/libslic3r/GCode/OrderingStrategies.hpp

@@ -3,8 +3,10 @@
 #ifndef slic3r_OrderingStrategies_hpp_
 #define slic3r_OrderingStrategies_hpp_
 
+#include "../libslic3r.h"
 #include "../Point.hpp"
 #include <cstddef>
+#include "libslic3r/PrintConfig.hpp"
 
 #ifndef SLIC3R_TEST_HARNESS
 #include "../Print.hpp"
@@ -15,8 +17,6 @@
 #include <utility>
 #include <vector>
 
-namespace Slic3r { enum class PrintOrder; }
-
 namespace Slic3r {
 
 // --- Path improvement (operate on index vectors into `centers`) ---

src/libslic3r/GCode/PressureEqualizer.cpp

@@ -13,7 +13,9 @@
 #include <algorithm>
 #include <string>
 
+#include "../libslic3r.h"
 #include "../PrintConfig.hpp"
+#include "../LocalesUtils.hpp"
 #include "../GCode.hpp"
 
 #include "PressureEqualizer.hpp"
@@ -21,7 +23,6 @@
 #include "libslic3r/Exception.hpp"
 #include "fast_float/fast_float.h"
 #include "GCodeWriter.hpp"
-#include "libslic3r/Config.hpp"
 
 namespace Slic3r {
 

src/libslic3r/GCode/PressureEqualizer.hpp

@@ -1,6 +1,7 @@
 #ifndef slic3r_GCode_PressureEqualizer_hpp_
 #define slic3r_GCode_PressureEqualizer_hpp_
 
+#include "../libslic3r.h"
 #include "../ExtrusionEntity.hpp"
 #include "../PrintConfig.hpp"
 #include <string>

src/libslic3r/GCode/PrintExtents.cpp

@@ -20,8 +20,6 @@
 #include <Eigen/Geometry>
 #include <vector>
 #include <cstddef>
-#include "libslic3r/Config.hpp"
-#include "libslic3r/PrintConfig.hpp"
 
 namespace Slic3r {
 

src/libslic3r/GCode/RetractWhenCrossingPerimeters.cpp

@@ -12,8 +12,6 @@
 #include "libslic3r/Polygon.hpp"
 
 #include "RetractWhenCrossingPerimeters.hpp"
-#include "libslic3r/Point.hpp"
-#include "libslic3r/SurfaceCollection.hpp"
 
 namespace Slic3r {