Keep the Process and Printer of an inherits_group of the Wrong Length

A project whose inherits_group did not have one entry per filament plus
the process and printer entries was loaded as if it had none. The CLI
then looked for system presets under the names of the user presets,
found none and refused to slice a project that slices on main.

The group is now read as before: the process first, the printer last
and the filaments in between, up to the filament count. A filament
without an entry counts as a system preset. A group with fewer than two
entries is still ignored. The warning stays.

src/OrcaSlicer.cpp

@@ -642,162 +642,6 @@ static void load_default_gcodes_to_config(DynamicPrintConfig& config, Preset::Ty
     }
 }
 
-static int load_assemble_plate_list(std::string config_file, std::vector<assemble_plate_info_t> &assemble_plate_info_list)
-{
-    int ret = 0;
-    boost::filesystem::path directory_path(config_file);
-
-    BOOST_LOG_TRIVIAL(info) << boost::format("%1% enter, file %2%")%__FUNCTION__ % config_file;
-    if (!fs::exists(directory_path)) {
-        BOOST_LOG_TRIVIAL(error) << boost::format("directory %1% not exist.")%config_file;
-        return CLI_FILE_NOTFOUND;
-    }
-
-    try {
-        json root_json;
-        boost::nowide::ifstream ifs(config_file);
-        ifs >> root_json;
-        ifs.close();
-
-        int plate_count = root_json[JSON_ASSEMPLE_PLATES].size();
-        if ((plate_count <= 0) || (plate_count > MAX_PLATE_COUNT)) {
-            BOOST_LOG_TRIVIAL(error) << __FUNCTION__<< boost::format(": invalid plate count %1%")%plate_count;
-            return CLI_CONFIG_FILE_ERROR;
-        }
-        assemble_plate_info_list.resize(plate_count);
-
-        for (int plate_index = 0; plate_index < plate_count; plate_index++)
-        {
-            assemble_plate_info_t &assemble_plate = assemble_plate_info_list[plate_index];
-            const json& plate_json = root_json[JSON_ASSEMPLE_PLATES][plate_index];
-            assemble_plate.plate_name = plate_json[JSON_ASSEMPLE_PLATE_NAME];
-            assemble_plate.need_arrange = plate_json[JSON_ASSEMPLE_PLATE_NEED_ARRANGE];
-
-            if (plate_json.contains(JSON_ASSEMPLE_PLATE_PARAMS)) {
-                assemble_plate.plate_params = plate_json[JSON_ASSEMPLE_PLATE_PARAMS].get<std::map<std::string, std::string>>();
-                BOOST_LOG_TRIVIAL(debug) << boost::format("Plate %1%, has %2% plate params") % (plate_index + 1)  % assemble_plate.plate_params.size();
-            }
-
-            int object_count = plate_json[JSON_ASSEMPLE_OBJECTS].size();
-            if (object_count <= 0) {
-                BOOST_LOG_TRIVIAL(error) << __FUNCTION__<< boost::format(": invalid object count %1% in plate %2%")%object_count %(plate_index+1);
-                return CLI_CONFIG_FILE_ERROR;
-            }
-
-            assemble_plate.assemble_obj_list.resize(object_count);
-            for (int object_index = 0; object_index < object_count; object_index++)
-            {
-                assemble_object_info_t& assemble_object = assemble_plate.assemble_obj_list[object_index];
-                const json& object_json = plate_json[JSON_ASSEMPLE_OBJECTS][object_index];
-
-                assemble_object.path = object_json[JSON_ASSEMPLE_OBJECT_PATH];
-                assemble_object.count = object_json[JSON_ASSEMPLE_OBJECT_COUNT];
-
-                if (assemble_object.count <= 0) {
-                    BOOST_LOG_TRIVIAL(error) << __FUNCTION__ << boost::format(": invalid object clone count %1% in plate %2% Object %3%") % assemble_object.count % (plate_index + 1) % assemble_object.path;
-                    return CLI_CONFIG_FILE_ERROR;
-                }
-
-                assemble_object.filaments = object_json.at(JSON_ASSEMPLE_OBJECT_FILAMENTS).get<std::vector<int>>();
-                if ((assemble_object.filaments.size() > 0) && (assemble_object.filaments.size() != assemble_object.count) && (assemble_object.filaments.size() != 1))
-                {
-                    BOOST_LOG_TRIVIAL(error) << __FUNCTION__ << boost::format(": object %1%'s filaments count %2% not equal to clone count %3%, also not equal to 1") % assemble_object.path % assemble_object.filaments.size() % assemble_object.count;
-                    return CLI_CONFIG_FILE_ERROR;
-                }
-
-                if (object_json.contains(JSON_ASSEMPLE_OBJECT_ASSEMBLE_INDEX)) {
-                    assemble_object.assemble_index = object_json[JSON_ASSEMPLE_OBJECT_ASSEMBLE_INDEX].get<std::vector<int>>();
-                    if ((assemble_object.assemble_index.size() > 0) && (assemble_object.assemble_index.size() != assemble_object.count) && (assemble_object.assemble_index.size() != 1))
-                    {
-                        BOOST_LOG_TRIVIAL(error) << __FUNCTION__ << boost::format(": object %1%'s assemble_index count %2% not equal to clone count %3%, also not equal to 1") % assemble_object.path % assemble_object.assemble_index.size() % assemble_object.count;
-                        return CLI_CONFIG_FILE_ERROR;
-                    }
-                }
-
-                if (object_json.contains(JSON_ASSEMPLE_OBJECT_POS_X)) {
-                    assemble_object.pos_x = object_json[JSON_ASSEMPLE_OBJECT_POS_X].get<std::vector<float>>();
-                    if ((assemble_object.pos_x.size() > 0) && (assemble_object.pos_x.size() != assemble_object.count) && (assemble_object.pos_x.size() != 1))
-                    {
-                        BOOST_LOG_TRIVIAL(error) << __FUNCTION__ << boost::format(": object %1%'s pos_x count %2% not equal to clone count %3%, also not equal to 1") % assemble_object.path % assemble_object.pos_x.size() % assemble_object.count;
-                        return CLI_CONFIG_FILE_ERROR;
-                    }
-                }
-                if (object_json.contains(JSON_ASSEMPLE_OBJECT_POS_Y)) {
-                    assemble_object.pos_y = object_json[JSON_ASSEMPLE_OBJECT_POS_Y].get<std::vector<float>>();
-                    if ((assemble_object.pos_y.size() > 0) && (assemble_object.pos_y.size() != assemble_object.count) && (assemble_object.pos_y.size() != 1))
-                    {
-                        BOOST_LOG_TRIVIAL(error) << __FUNCTION__ << boost::format(": object %1%'s pos_y count %2% not equal to clone count %3%, also not equal to 1") % assemble_object.path % assemble_object.pos_y.size() % assemble_object.count;
-                        return CLI_CONFIG_FILE_ERROR;
-                    }
-                }
-                if (object_json.contains(JSON_ASSEMPLE_OBJECT_POS_Z)) {
-                    assemble_object.pos_z = object_json[JSON_ASSEMPLE_OBJECT_POS_Z].get<std::vector<float>>();
-                    if ((assemble_object.pos_z.size() > 0) && (assemble_object.pos_z.size() != assemble_object.count) && (assemble_object.pos_z.size() != 1))
-                    {
-                        BOOST_LOG_TRIVIAL(error) << __FUNCTION__ << boost::format(": object %1%'s pos_z count %2% not equal to clone count %3%, also not equal to 1") % assemble_object.path % assemble_object.pos_z.size() % assemble_object.count;
-                        return CLI_CONFIG_FILE_ERROR;
-                    }
-                }
-                if (object_json.contains(JSON_ASSEMPLE_OBJECT_PRINT_PARAMS)) {
-                    assemble_object.print_params = object_json[JSON_ASSEMPLE_OBJECT_PRINT_PARAMS].get<std::map<std::string, std::string>>();
-                    BOOST_LOG_TRIVIAL(debug) << boost::format("Plate %1%, object %2% has %3% print params") % (plate_index + 1) %assemble_object.path % assemble_object.print_params.size();
-                }
-                if (object_json.contains(JSON_ASSEMPLE_OBJECT_HEIGHT_RANGES)) {
-                    json height_range_json = object_json[JSON_ASSEMPLE_OBJECT_HEIGHT_RANGES];
-                    int range_count = height_range_json.size();
-
-                    BOOST_LOG_TRIVIAL(debug) << boost::format("Plate %1%, object %2% has %3% height ranges") % (plate_index + 1) %assemble_object.path % range_count;
-
-                    assemble_object.height_ranges.resize(range_count);
-                    for (int range_index = 0; range_index < range_count; range_index++)
-                    {
-                        height_range_info_t& height_range = assemble_object.height_ranges[range_index];
-                        height_range.min_z = height_range_json[range_index][JSON_ASSEMPLE_OBJECT_MIN_Z];
-                        height_range.max_z = height_range_json[range_index][JSON_ASSEMPLE_OBJECT_MAX_Z];
-                        height_range.range_params = height_range_json[range_index][JSON_ASSEMPLE_OBJECT_RANGE_PARAMS].get<std::map<std::string, std::string>>();
-                    }
-                }
-            }
-            if (plate_json.contains(JSON_ASSEMPLE_ASSEMBLE_PARAMS)) {
-                json assemble_params_json = plate_json[JSON_ASSEMPLE_ASSEMBLE_PARAMS];
-                int assemble_count = assemble_params_json.size();
-                for (int i = 0; i < assemble_count; i++)
-                {
-                    assembled_param_info_t assembled_param;
-                    int assemble_index = assemble_params_json[i][JSON_ASSEMPLE_OBJECT_ASSEMBLE_INDEX];
-                    if (assemble_params_json[i].contains(JSON_ASSEMPLE_OBJECT_PRINT_PARAMS)) {
-                        assembled_param.print_params = assemble_params_json[i][JSON_ASSEMPLE_OBJECT_PRINT_PARAMS].get<std::map<std::string, std::string>>();
-                        BOOST_LOG_TRIVIAL(debug) << boost::format("Plate %1%, assemble object %2% has %3% print params") % (plate_index + 1) %i % assembled_param.print_params.size();
-                    }
-                    if (assemble_params_json[i].contains(JSON_ASSEMPLE_OBJECT_HEIGHT_RANGES)) {
-                        json height_range_json = assemble_params_json[i][JSON_ASSEMPLE_OBJECT_HEIGHT_RANGES];
-                        int range_count = height_range_json.size();
-
-                        BOOST_LOG_TRIVIAL(debug) << boost::format("Plate %1%, assemble object %2% has %3% height ranges") % (plate_index + 1) %i % range_count;
-
-                        assembled_param.height_ranges.resize(range_count);
-                        for (int range_index = 0; range_index < range_count; range_index++)
-                        {
-                            height_range_info_t& height_range = assembled_param.height_ranges[range_index];
-                            height_range.min_z = height_range_json[range_index][JSON_ASSEMPLE_OBJECT_MIN_Z];
-                            height_range.max_z = height_range_json[range_index][JSON_ASSEMPLE_OBJECT_MAX_Z];
-                            height_range.range_params = height_range_json[range_index][JSON_ASSEMPLE_OBJECT_RANGE_PARAMS].get<std::map<std::string, std::string>>();
-                        }
-                    }
-                    assemble_plate.assembled_param_list.emplace(assemble_index, std::move(assembled_param));
-                }
-                BOOST_LOG_TRIVIAL(debug) << boost::format("Plate %1%, has %2% plate params") % (plate_index + 1)  % assemble_plate.plate_params.size();
-            }
-        }
-    }
-    catch(std::exception &err) {
-        BOOST_LOG_TRIVIAL(error) << __FUNCTION__<< ": parse file "<<config_file<<" got a generic exception, reason = " << err.what();
-        ret = CLI_CONFIG_FILE_ERROR;
-    }
-
-    return ret;
-}
-
 void merge_or_add_object(assemble_plate_info_t& assemble_plate_info, Model &model, int assemble_index, std::map<int, ModelObject*> &merged_objects, ModelObject *ori_object)
 {
     if (assemble_index > 0) {
@@ -1863,6 +1707,14 @@ int CLI::run(int argc, char **argv)
 
                     BOOST_LOG_TRIVIAL(info) << boost::format("current_printer_name %1%, current_process_name %2%")%current_printer_name %current_process_name;
                     ConfigOptionStrings* option_strings = config.option<ConfigOptionStrings>("inherits_group");
+                    // One entry for the process, one per filament and one for the printer. A group of another
+                    // length still has the process first and the printer last; one too short for that is ignored.
+                    if (option_strings && option_strings->values.size() != current_filaments_name.size() + 2) {
+                        boost::nowide::cerr << "Warning: inherits_group has " << option_strings->values.size() << " entries, expected "
+                                            << current_filaments_name.size() + 2 << " for " << current_filaments_name.size() << " filaments" << std::endl;
+                        if (option_strings->values.size() < 2)
+                            option_strings = nullptr;
+                    }
                     if (option_strings) {
                         current_inherits_group = option_strings->values;
                         size_t size = current_inherits_group.size();
@@ -1884,14 +1736,11 @@ int CLI::run(int argc, char **argv)
                             BOOST_LOG_TRIVIAL(info) << boost::format("inherits of process valid, current_process_system_name is %1%") %current_process_system_name;
                         }
 
-                        current_filaments_system_name.resize(size - 2);
-                        for (int index = 1; index < (size - 1); index++) {
-                            if (current_inherits_group[index].empty()) {
-                                current_filaments_system_name[index-1] = current_filaments_name[index-1];
-                            }
-                            else {
+                        // A filament without an entry of its own counts as a system preset.
+                        current_filaments_system_name = current_filaments_name;
+                        for (size_t index = 1; index < size - 1 && index <= current_filaments_name.size(); index++) {
+                            if (!current_inherits_group[index].empty())
                                 current_filaments_system_name[index-1] = current_inherits_group[index];
-                            }
                         }
                     }
                     else {
@@ -2023,7 +1872,12 @@ int CLI::run(int argc, char **argv)
         //parse the json and assemble object here
         Model model;
 
-        int ret = load_assemble_plate_list(load_assemble_list, assemble_plate_info_list);
+        AssembleListResult list_result = load_assemble_plate_list(load_assemble_list, assemble_plate_info_list, MAX_PLATE_COUNT);
+        int ret = CLI_SUCCESS;
+        if (list_result == AssembleListResult::FileNotFound)
+            ret = CLI_FILE_NOTFOUND;
+        else if (list_result == AssembleListResult::ConfigError)
+            ret = CLI_CONFIG_FILE_ERROR;
         if (ret) {
             record_exit_reson(outfile_dir, ret, 0, cli_errors[ret], sliced_info);
             flush_and_exit(ret);
@@ -4733,6 +4587,11 @@ int CLI::run(int argc, char **argv)
                 record_exit_reson(outfile_dir, CLI_INVALID_PARAMS, 0, cli_errors[CLI_INVALID_PARAMS], sliced_info);
                 flush_and_exit(CLI_INVALID_PARAMS);
             }
+            if (m_models.empty()) {
+                boost::nowide::cerr << "Invalid params: --assemble needs at least one input model." << std::endl;
+                record_exit_reson(outfile_dir, CLI_INVALID_PARAMS, 0, cli_errors[CLI_INVALID_PARAMS], sliced_info);
+                flush_and_exit(CLI_INVALID_PARAMS);
+            }
             Model m;
             ModelObject* new_object = m.add_object();
             new_object->name = _u8L("Assembly");
@@ -5673,7 +5532,7 @@ int CLI::run(int argc, char **argv)
                         float w = dynamic_cast<const ConfigOptionFloat *>(m_print_config.option("prime_tower_width"))->value;
                         float a = dynamic_cast<const ConfigOptionFloat *>(m_print_config.option("wipe_tower_rotation_angle"))->value;
                         float v = dynamic_cast<const ConfigOptionFloat *>(m_print_config.option("prime_volume"))->value;
-                        unsigned int filaments_cnt = plate_data_src[plate_to_slice-1]->slice_filaments_info.size();
+                        unsigned int filaments_cnt = (plate_data_src.size() >= static_cast<size_t>(plate_to_slice)) ? plate_data_src[plate_to_slice-1]->slice_filaments_info.size() : 0;
                         if ((filaments_cnt == 0) || need_skip)
                         {
                             // slice filaments info invalid

src/OrcaSlicer.hpp

@@ -5,6 +5,7 @@
 
 #include "libslic3r/Config.hpp"
 #include "libslic3r/Model.hpp"
+#include "libslic3r/Format/AssembleList.hpp"
 
 namespace Slic3r {
 
@@ -19,64 +20,6 @@ namespace IO {
     };
 }
 
-#define JSON_ASSEMPLE_PLATES                   "plates"
-#define JSON_ASSEMPLE_PLATE_PARAMS             "plate_params"
-#define JSON_ASSEMPLE_PLATE_NAME               "plate_name"
-#define JSON_ASSEMPLE_PLATE_NEED_ARRANGE       "need_arrange"
-#define JSON_ASSEMPLE_OBJECTS                  "objects"
-#define JSON_ASSEMPLE_OBJECT_PATH              "path"
-#define JSON_ASSEMPLE_OBJECT_COUNT             "count"
-#define JSON_ASSEMPLE_OBJECT_FILAMENTS         "filaments"
-#define JSON_ASSEMPLE_OBJECT_POS_X             "pos_x"
-#define JSON_ASSEMPLE_OBJECT_POS_Y             "pos_y"
-#define JSON_ASSEMPLE_OBJECT_POS_Z             "pos_z"
-#define JSON_ASSEMPLE_OBJECT_ASSEMBLE_INDEX    "assemble_index"
-#define JSON_ASSEMPLE_OBJECT_PRINT_PARAMS      "print_params"
-#define JSON_ASSEMPLE_ASSEMBLE_PARAMS         "assembled_params"
-
-
-#define JSON_ASSEMPLE_OBJECT_MIN_Z              "min_z"
-#define JSON_ASSEMPLE_OBJECT_MAX_Z              "max_z"
-#define JSON_ASSEMPLE_OBJECT_HEIGHT_RANGES      "height_ranges"
-#define JSON_ASSEMPLE_OBJECT_RANGE_PARAMS       "range_params"
-
-typedef struct _height_range_info {
-    float         min_z;
-    float         max_z;
-
-    std::map<std::string, std::string> range_params;
-}height_range_info_t;
-
-typedef struct _assembled_param_info {
-    std::map<std::string, std::string> print_params;
-    std::vector<height_range_info_t> height_ranges;
-}assembled_param_info_t;
-
-typedef struct _assemble_object_info {
-    std::string         path;
-    int                 count;
-
-    std::vector<int>    filaments;
-    std::vector<int>    assemble_index;
-    std::vector<float>  pos_x;
-    std::vector<float>  pos_y;
-    std::vector<float>  pos_z;
-    std::map<std::string, std::string> print_params;
-    std::vector<height_range_info_t> height_ranges;
-}assemble_object_info_t;
-
-typedef struct _assemble_plate_info {
-    std::string         plate_name;
-    bool                need_arrange {false};
-    int                 filaments_count {0};
-
-    std::map<std::string, std::string> plate_params;
-    std::vector<assemble_object_info_t> assemble_obj_list;
-    std::vector<ModelObject *> loaded_obj_list;
-    std::map<int, assembled_param_info_t> assembled_param_list;
-}assemble_plate_info_t;
-
-
 typedef struct _printer_plate_info {
     std::string         printer_name;
     int                 printable_width{0};

src/libslic3r/CMakeLists.txt

@@ -205,6 +205,8 @@ set(lisbslic3r_sources
     Format/3mf.hpp
     Format/AMF.cpp
     Format/AMF.hpp
+    Format/AssembleList.cpp
+    Format/AssembleList.hpp
     Format/DRC.cpp
     Format/DRC.hpp
     Format/bbs_3mf.cpp

src/libslic3r/Format/AssembleList.cpp

@@ -0,0 +1,204 @@
+#include "AssembleList.hpp"
+
+#include <algorithm>
+
+#include <boost/filesystem.hpp>
+#include <boost/format.hpp>
+#include <boost/log/trivial.hpp>
+#include <boost/nowide/fstream.hpp>
+
+#include "nlohmann/json.hpp"
+
+#define JSON_ASSEMPLE_PLATES                   "plates"
+#define JSON_ASSEMPLE_PLATE_PARAMS             "plate_params"
+#define JSON_ASSEMPLE_PLATE_NAME               "plate_name"
+#define JSON_ASSEMPLE_PLATE_NEED_ARRANGE       "need_arrange"
+#define JSON_ASSEMPLE_OBJECTS                  "objects"
+#define JSON_ASSEMPLE_OBJECT_PATH              "path"
+#define JSON_ASSEMPLE_OBJECT_COUNT             "count"
+#define JSON_ASSEMPLE_OBJECT_FILAMENTS         "filaments"
+#define JSON_ASSEMPLE_OBJECT_POS_X             "pos_x"
+#define JSON_ASSEMPLE_OBJECT_POS_Y             "pos_y"
+#define JSON_ASSEMPLE_OBJECT_POS_Z             "pos_z"
+#define JSON_ASSEMPLE_OBJECT_ASSEMBLE_INDEX    "assemble_index"
+#define JSON_ASSEMPLE_OBJECT_PRINT_PARAMS      "print_params"
+#define JSON_ASSEMPLE_ASSEMBLE_PARAMS         "assembled_params"
+
+
+#define JSON_ASSEMPLE_OBJECT_MIN_Z              "min_z"
+#define JSON_ASSEMPLE_OBJECT_MAX_Z              "max_z"
+#define JSON_ASSEMPLE_OBJECT_HEIGHT_RANGES      "height_ranges"
+#define JSON_ASSEMPLE_OBJECT_RANGE_PARAMS       "range_params"
+
+namespace Slic3r {
+
+using json = nlohmann::json;
+
+AssembleListResult load_assemble_plate_list(const std::string &config_file, std::vector<assemble_plate_info_t> &assemble_plate_info_list, int max_plate_count)
+{
+    AssembleListResult ret = AssembleListResult::Success;
+    boost::filesystem::path directory_path(config_file);
+
+    BOOST_LOG_TRIVIAL(info) << boost::format("%1% enter, file %2%")%__FUNCTION__ % config_file;
+    if (!boost::filesystem::exists(directory_path)) {
+        BOOST_LOG_TRIVIAL(error) << boost::format("directory %1% not exist.")%config_file;
+        return AssembleListResult::FileNotFound;
+    }
+
+    try {
+        json root_json;
+        boost::nowide::ifstream ifs(config_file);
+        ifs >> root_json;
+        ifs.close();
+
+        int plate_count = root_json[JSON_ASSEMPLE_PLATES].size();
+        if ((plate_count <= 0) || (plate_count > max_plate_count)) {
+            BOOST_LOG_TRIVIAL(error) << __FUNCTION__<< boost::format(": invalid plate count %1%")%plate_count;
+            return AssembleListResult::ConfigError;
+        }
+        assemble_plate_info_list.resize(plate_count);
+
+        for (int plate_index = 0; plate_index < plate_count; plate_index++)
+        {
+            assemble_plate_info_t &assemble_plate = assemble_plate_info_list[plate_index];
+            const json& plate_json = root_json[JSON_ASSEMPLE_PLATES][plate_index];
+            assemble_plate.plate_name = plate_json[JSON_ASSEMPLE_PLATE_NAME];
+            assemble_plate.need_arrange = plate_json[JSON_ASSEMPLE_PLATE_NEED_ARRANGE];
+
+            if (plate_json.contains(JSON_ASSEMPLE_PLATE_PARAMS)) {
+                assemble_plate.plate_params = plate_json[JSON_ASSEMPLE_PLATE_PARAMS].get<std::map<std::string, std::string>>();
+                BOOST_LOG_TRIVIAL(debug) << boost::format("Plate %1%, has %2% plate params") % (plate_index + 1)  % assemble_plate.plate_params.size();
+            }
+
+            int object_count = plate_json[JSON_ASSEMPLE_OBJECTS].size();
+            if (object_count <= 0) {
+                BOOST_LOG_TRIVIAL(error) << __FUNCTION__<< boost::format(": invalid object count %1% in plate %2%")%object_count %(plate_index+1);
+                return AssembleListResult::ConfigError;
+            }
+
+            assemble_plate.assemble_obj_list.resize(object_count);
+            for (int object_index = 0; object_index < object_count; object_index++)
+            {
+                assemble_object_info_t& assemble_object = assemble_plate.assemble_obj_list[object_index];
+                const json& object_json = plate_json[JSON_ASSEMPLE_OBJECTS][object_index];
+
+                assemble_object.path = object_json[JSON_ASSEMPLE_OBJECT_PATH];
+                assemble_object.count = object_json[JSON_ASSEMPLE_OBJECT_COUNT];
+
+                if (assemble_object.count <= 0) {
+                    BOOST_LOG_TRIVIAL(error) << __FUNCTION__ << boost::format(": invalid object clone count %1% in plate %2% Object %3%") % assemble_object.count % (plate_index + 1) % assemble_object.path;
+                    return AssembleListResult::ConfigError;
+                }
+
+                assemble_object.filaments = object_json.at(JSON_ASSEMPLE_OBJECT_FILAMENTS).get<std::vector<int>>();
+                if (assemble_object.filaments.empty())
+                {
+                    BOOST_LOG_TRIVIAL(error) << __FUNCTION__ << boost::format(": object %1%'s filaments list is empty") % assemble_object.path;
+                    return AssembleListResult::ConfigError;
+                }
+                if ((assemble_object.filaments.size() != assemble_object.count) && (assemble_object.filaments.size() != 1))
+                {
+                    BOOST_LOG_TRIVIAL(error) << __FUNCTION__ << boost::format(": object %1%'s filaments count %2% not equal to clone count %3%, also not equal to 1") % assemble_object.path % assemble_object.filaments.size() % assemble_object.count;
+                    return AssembleListResult::ConfigError;
+                }
+                // 0 keeps the default filament, as it does for --load-filament-ids.
+                if (std::any_of(assemble_object.filaments.begin(), assemble_object.filaments.end(), [](int id) { return id < 0; }))
+                {
+                    BOOST_LOG_TRIVIAL(error) << __FUNCTION__ << boost::format(": object %1% has a negative filament id") % assemble_object.path;
+                    return AssembleListResult::ConfigError;
+                }
+
+                if (object_json.contains(JSON_ASSEMPLE_OBJECT_ASSEMBLE_INDEX)) {
+                    assemble_object.assemble_index = object_json[JSON_ASSEMPLE_OBJECT_ASSEMBLE_INDEX].get<std::vector<int>>();
+                    if ((assemble_object.assemble_index.size() > 0) && (assemble_object.assemble_index.size() != assemble_object.count) && (assemble_object.assemble_index.size() != 1))
+                    {
+                        BOOST_LOG_TRIVIAL(error) << __FUNCTION__ << boost::format(": object %1%'s assemble_index count %2% not equal to clone count %3%, also not equal to 1") % assemble_object.path % assemble_object.assemble_index.size() % assemble_object.count;
+                        return AssembleListResult::ConfigError;
+                    }
+                }
+
+                if (object_json.contains(JSON_ASSEMPLE_OBJECT_POS_X)) {
+                    assemble_object.pos_x = object_json[JSON_ASSEMPLE_OBJECT_POS_X].get<std::vector<float>>();
+                    if ((assemble_object.pos_x.size() > 0) && (assemble_object.pos_x.size() != assemble_object.count) && (assemble_object.pos_x.size() != 1))
+                    {
+                        BOOST_LOG_TRIVIAL(error) << __FUNCTION__ << boost::format(": object %1%'s pos_x count %2% not equal to clone count %3%, also not equal to 1") % assemble_object.path % assemble_object.pos_x.size() % assemble_object.count;
+                        return AssembleListResult::ConfigError;
+                    }
+                }
+                if (object_json.contains(JSON_ASSEMPLE_OBJECT_POS_Y)) {
+                    assemble_object.pos_y = object_json[JSON_ASSEMPLE_OBJECT_POS_Y].get<std::vector<float>>();
+                    if ((assemble_object.pos_y.size() > 0) && (assemble_object.pos_y.size() != assemble_object.count) && (assemble_object.pos_y.size() != 1))
+                    {
+                        BOOST_LOG_TRIVIAL(error) << __FUNCTION__ << boost::format(": object %1%'s pos_y count %2% not equal to clone count %3%, also not equal to 1") % assemble_object.path % assemble_object.pos_y.size() % assemble_object.count;
+                        return AssembleListResult::ConfigError;
+                    }
+                }
+                if (object_json.contains(JSON_ASSEMPLE_OBJECT_POS_Z)) {
+                    assemble_object.pos_z = object_json[JSON_ASSEMPLE_OBJECT_POS_Z].get<std::vector<float>>();
+                    if ((assemble_object.pos_z.size() > 0) && (assemble_object.pos_z.size() != assemble_object.count) && (assemble_object.pos_z.size() != 1))
+                    {
+                        BOOST_LOG_TRIVIAL(error) << __FUNCTION__ << boost::format(": object %1%'s pos_z count %2% not equal to clone count %3%, also not equal to 1") % assemble_object.path % assemble_object.pos_z.size() % assemble_object.count;
+                        return AssembleListResult::ConfigError;
+                    }
+                }
+                if (object_json.contains(JSON_ASSEMPLE_OBJECT_PRINT_PARAMS)) {
+                    assemble_object.print_params = object_json[JSON_ASSEMPLE_OBJECT_PRINT_PARAMS].get<std::map<std::string, std::string>>();
+                    BOOST_LOG_TRIVIAL(debug) << boost::format("Plate %1%, object %2% has %3% print params") % (plate_index + 1) %assemble_object.path % assemble_object.print_params.size();
+                }
+                if (object_json.contains(JSON_ASSEMPLE_OBJECT_HEIGHT_RANGES)) {
+                    json height_range_json = object_json[JSON_ASSEMPLE_OBJECT_HEIGHT_RANGES];
+                    int range_count = height_range_json.size();
+
+                    BOOST_LOG_TRIVIAL(debug) << boost::format("Plate %1%, object %2% has %3% height ranges") % (plate_index + 1) %assemble_object.path % range_count;
+
+                    assemble_object.height_ranges.resize(range_count);
+                    for (int range_index = 0; range_index < range_count; range_index++)
+                    {
+                        height_range_info_t& height_range = assemble_object.height_ranges[range_index];
+                        height_range.min_z = height_range_json[range_index][JSON_ASSEMPLE_OBJECT_MIN_Z];
+                        height_range.max_z = height_range_json[range_index][JSON_ASSEMPLE_OBJECT_MAX_Z];
+                        height_range.range_params = height_range_json[range_index][JSON_ASSEMPLE_OBJECT_RANGE_PARAMS].get<std::map<std::string, std::string>>();
+                    }
+                }
+            }
+            if (plate_json.contains(JSON_ASSEMPLE_ASSEMBLE_PARAMS)) {
+                json assemble_params_json = plate_json[JSON_ASSEMPLE_ASSEMBLE_PARAMS];
+                int assemble_count = assemble_params_json.size();
+                for (int i = 0; i < assemble_count; i++)
+                {
+                    assembled_param_info_t assembled_param;
+                    int assemble_index = assemble_params_json[i][JSON_ASSEMPLE_OBJECT_ASSEMBLE_INDEX];
+                    if (assemble_params_json[i].contains(JSON_ASSEMPLE_OBJECT_PRINT_PARAMS)) {
+                        assembled_param.print_params = assemble_params_json[i][JSON_ASSEMPLE_OBJECT_PRINT_PARAMS].get<std::map<std::string, std::string>>();
+                        BOOST_LOG_TRIVIAL(debug) << boost::format("Plate %1%, assemble object %2% has %3% print params") % (plate_index + 1) %i % assembled_param.print_params.size();
+                    }
+                    if (assemble_params_json[i].contains(JSON_ASSEMPLE_OBJECT_HEIGHT_RANGES)) {
+                        json height_range_json = assemble_params_json[i][JSON_ASSEMPLE_OBJECT_HEIGHT_RANGES];
+                        int range_count = height_range_json.size();
+
+                        BOOST_LOG_TRIVIAL(debug) << boost::format("Plate %1%, assemble object %2% has %3% height ranges") % (plate_index + 1) %i % range_count;
+
+                        assembled_param.height_ranges.resize(range_count);
+                        for (int range_index = 0; range_index < range_count; range_index++)
+                        {
+                            height_range_info_t& height_range = assembled_param.height_ranges[range_index];
+                            height_range.min_z = height_range_json[range_index][JSON_ASSEMPLE_OBJECT_MIN_Z];
+                            height_range.max_z = height_range_json[range_index][JSON_ASSEMPLE_OBJECT_MAX_Z];
+                            height_range.range_params = height_range_json[range_index][JSON_ASSEMPLE_OBJECT_RANGE_PARAMS].get<std::map<std::string, std::string>>();
+                        }
+                    }
+                    assemble_plate.assembled_param_list.emplace(assemble_index, std::move(assembled_param));
+                }
+                BOOST_LOG_TRIVIAL(debug) << boost::format("Plate %1%, has %2% plate params") % (plate_index + 1)  % assemble_plate.plate_params.size();
+            }
+        }
+    }
+    catch(std::exception &err) {
+        BOOST_LOG_TRIVIAL(error) << __FUNCTION__<< ": parse file "<<config_file<<" got a generic exception, reason = " << err.what();
+        ret = AssembleListResult::ConfigError;
+    }
+
+    return ret;
+}
+
+} // namespace Slic3r

src/libslic3r/Format/AssembleList.hpp

@@ -0,0 +1,60 @@
+#ifndef slic3r_Format_AssembleList_hpp_
+#define slic3r_Format_AssembleList_hpp_
+
+#include <map>
+#include <string>
+#include <vector>
+
+namespace Slic3r {
+
+class ModelObject;
+
+typedef struct _height_range_info {
+    float         min_z;
+    float         max_z;
+
+    std::map<std::string, std::string> range_params;
+}height_range_info_t;
+
+typedef struct _assembled_param_info {
+    std::map<std::string, std::string> print_params;
+    std::vector<height_range_info_t> height_ranges;
+}assembled_param_info_t;
+
+typedef struct _assemble_object_info {
+    std::string         path;
+    int                 count;
+
+    std::vector<int>    filaments;
+    std::vector<int>    assemble_index;
+    std::vector<float>  pos_x;
+    std::vector<float>  pos_y;
+    std::vector<float>  pos_z;
+    std::map<std::string, std::string> print_params;
+    std::vector<height_range_info_t> height_ranges;
+}assemble_object_info_t;
+
+typedef struct _assemble_plate_info {
+    std::string         plate_name;
+    bool                need_arrange {false};
+    int                 filaments_count {0};
+
+    std::map<std::string, std::string> plate_params;
+    std::vector<assemble_object_info_t> assemble_obj_list;
+    std::vector<ModelObject *> loaded_obj_list;
+    std::map<int, assembled_param_info_t> assembled_param_list;
+}assemble_plate_info_t;
+
+enum class AssembleListResult {
+    Success,
+    FileNotFound,
+    // Malformed JSON, a missing required field, or a value that fails validation.
+    ConfigError
+};
+
+// Read the JSON assemble list used by the CLI's --load-assemble-list into one entry per plate.
+AssembleListResult load_assemble_plate_list(const std::string &config_file, std::vector<assemble_plate_info_t> &assemble_plate_info_list, int max_plate_count);
+
+} // namespace Slic3r
+
+#endif /* slic3r_Format_AssembleList_hpp_ */

src/slic3r/GUI/AmsMappingPopup.cpp

@@ -819,7 +819,7 @@ AmsMapingPopup::AmsMapingPopup(wxWindow *parent, bool use_in_sync_dialog) :
 
      m_scrolled_window = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxVSCROLL | wxHSCROLL);
      m_scrolled_window->SetBackgroundColour(*wxWHITE);
-     m_scrolled_window->SetScrollRate(0, FromDIP(10));
+     m_scrolled_window->SetScrollRate(0, FromDIP(20));
 
      wxBoxSizer *title_sizer_h= new wxBoxSizer(wxHORIZONTAL);
      wxBoxSizer *title_sizer_v = new wxBoxSizer(wxVERTICAL);
@@ -1000,13 +1000,13 @@ AmsMapingPopup::AmsMapingPopup(wxWindow *parent, bool use_in_sync_dialog) :
                   show_pos.x = screen_size.GetLeft();
                   m_scrolled_window->SetMaxSize(wxSize(screen_size.GetWidth(), popup_height));
                   m_scrolled_window->SetMinSize(wxSize(screen_size.GetWidth(), popup_height));
-                  m_scrolled_window->SetScrollRate(FromDIP(10), FromDIP(10));
+                  m_scrolled_window->SetScrollRate(FromDIP(10), FromDIP(20));
               }
               else
               {
                   m_scrolled_window->SetMaxSize(wxSize(popup_width, popup_height));
                   m_scrolled_window->SetMinSize(wxSize(popup_width, popup_height));
-                  m_scrolled_window->SetScrollRate(0, FromDIP(10));
+                  m_scrolled_window->SetScrollRate(0, FromDIP(20));
               }
 
               //Vertical Direction Processing
@@ -2117,7 +2117,7 @@ void AmsReplaceMaterialDialog::create()
     identical_filament->SetForegroundColour(StateColor::darkModeColorFor(wxColour("#009688"))); // Orca: accent teal (not brand green)
 
     m_scrollview_groups = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxHSCROLL | wxVSCROLL);
-    m_scrollview_groups->SetScrollRate(5, 5);
+    m_scrollview_groups->SetScrollRate(5, FromDIP(20));
     //m_scrollview_groups->SetMinSize(wxSize(400, 400));
     //m_scrollview_groups->SetMaxSize(wxSize(400, 400));
     m_scrollview_sizer = new wxBoxSizer(wxVERTICAL);

src/slic3r/GUI/Auxiliary.cpp

@@ -606,7 +606,7 @@ AuFolderPanel::AuFolderPanel(wxWindow *parent, AuxiliaryFolderType type, wxWindo
     wxBoxSizer *sizer_main = new wxBoxSizer(wxVERTICAL);
 
     m_scrolledWindow = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxHSCROLL | wxVSCROLL);
-    m_scrolledWindow->SetScrollRate(5, 5);
+    m_scrolledWindow->SetScrollRate(5, FromDIP(20));
     wxBoxSizer *sizer_body = new wxBoxSizer(wxVERTICAL);
     wxBoxSizer *sizer_top  = new wxBoxSizer(wxHORIZONTAL);
 

src/slic3r/GUI/BindDialog.cpp

@@ -558,7 +558,7 @@ PingCodeBindDialog::~PingCodeBindDialog() {
      //show bind failed info
      m_sw_bind_failed_info = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, wxSize(FromDIP(450), FromDIP(300)), wxVSCROLL);
      m_sw_bind_failed_info->SetBackgroundColour(*wxWHITE);
-     m_sw_bind_failed_info->SetScrollRate(5, 5);
+     m_sw_bind_failed_info->SetScrollRate(5, FromDIP(20));
      m_sw_bind_failed_info->SetMinSize(wxSize(FromDIP(450), FromDIP(90)));
      m_sw_bind_failed_info->SetMaxSize(wxSize(FromDIP(450), FromDIP(90)));
 

src/slic3r/GUI/CAD/DesignPanel.cpp

@@ -3521,7 +3521,7 @@ DesignPanel::DesignPanel(wxWindow* parent)
     cards->Show(m_box_mate,        false, true);
 
     m_form->FitInside();
-    m_form->SetScrollRate(0, 10);   // vertical only, like Prepare's sidebar: never scroll labels out
+    m_form->SetScrollRate(0, FromDIP(20));   // vertical only, like Prepare's sidebar: never scroll labels out
     m_form->SetMinSize(wxSize(264, -1));
 
     // Right column: a small view toolbar over the live 3D viewport that mirrors

src/slic3r/GUI/CaliHistoryDialog.cpp

@@ -115,7 +115,7 @@ HistoryWindow::HistoryWindow(wxWindow* parent, const std::vector<PACalibResult>&
     auto main_sizer = new wxBoxSizer(wxVERTICAL);
 
     auto scroll_window = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxHSCROLL | wxVSCROLL);
-    scroll_window->SetScrollRate(5, 5);
+    scroll_window->SetScrollRate(5, FromDIP(20));
     scroll_window->SetBackgroundColour(*wxWHITE);
     scroll_window->SetMinSize(HISTORY_WINDOW_SIZE);
     scroll_window->SetSize(HISTORY_WINDOW_SIZE);

src/slic3r/GUI/CalibrationPanel.cpp

@@ -207,7 +207,7 @@ SelectMObjectPopup::SelectMObjectPopup(wxWindow* parent)
     m_scrolledWindow = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, SELECT_MACHINE_LIST_SIZE, wxHSCROLL | wxVSCROLL);
     m_scrolledWindow->SetBackgroundColour(*wxWHITE);
     m_scrolledWindow->SetMinSize(SELECT_MACHINE_LIST_SIZE);
-    m_scrolledWindow->SetScrollRate(0, 5);
+    m_scrolledWindow->SetScrollRate(0, SELECT_MACHINE_ITEM_SIZE.y);
     auto m_sizxer_scrolledWindow = new wxBoxSizer(wxVERTICAL);
     m_scrolledWindow->SetSizer(m_sizxer_scrolledWindow);
     m_scrolledWindow->Layout();

src/slic3r/GUI/CalibrationWizard.cpp

@@ -81,7 +81,7 @@ CalibrationWizard::CalibrationWizard(wxWindow* parent, CalibMode mode, wxWindowI
     wxBoxSizer* main_sizer = new wxBoxSizer(wxVERTICAL);
 
     m_scrolledWindow = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxHSCROLL | wxVSCROLL);
-    m_scrolledWindow->SetScrollRate(5, 5);
+    m_scrolledWindow->SetScrollRate(5, FromDIP(20));
     m_scrolledWindow->SetBackgroundColour(*wxWHITE);
 
     wxBoxSizer* padding_sizer = new wxBoxSizer(wxHORIZONTAL);

src/slic3r/GUI/CalibrationWizardPage.cpp

@@ -834,7 +834,7 @@ void CaliPageSendingPanel::create(wxWindow* parent)
 
     m_sw_print_failed_info = new wxScrolledWindow(parent, wxID_ANY, wxDefaultPosition, wxSize(FromDIP(380), FromDIP(125)), wxVSCROLL);
     m_sw_print_failed_info->SetBackgroundColour(*wxWHITE);
-    m_sw_print_failed_info->SetScrollRate(0, 5);
+    m_sw_print_failed_info->SetScrollRate(0, FromDIP(20));
     m_sw_print_failed_info->SetMinSize(wxSize(FromDIP(380), FromDIP(125)));
     m_sw_print_failed_info->SetMaxSize(wxSize(FromDIP(380), FromDIP(125)));
 

src/slic3r/GUI/ConfigWizard.cpp

@@ -2710,7 +2710,7 @@ ConfigWizard::ConfigWizard(wxWindow *parent)
     SetSizerAndFit(vsizer);
 
     // We can now enable scrolling on hscroll
-    p->hscroll->SetScrollRate(30, 30);
+    p->hscroll->SetScrollRate(30, FromDIP(20));
 
     on_window_geometry(this, [this]() {
         p->init_dialog_size();

src/slic3r/GUI/CreatePresetsDialog.cpp

@@ -699,7 +699,7 @@ CreateFilamentPresetDialog::CreateFilamentPresetDialog(wxWindow *parent)
     m_scrolled_preset_panel = new wxScrolledWindow(this, wxID_ANY);
     m_scrolled_preset_panel->SetMaxSize(wxSize(-1, FromDIP(350)));
     m_scrolled_preset_panel->SetBackgroundColour(*wxWHITE);
-    m_scrolled_preset_panel->SetScrollRate(5, 5);
+    m_scrolled_preset_panel->SetScrollRate(5, FromDIP(20));
     m_scrolled_sizer = new wxBoxSizer(wxVERTICAL);
     m_scrolled_sizer->Add(create_item(FilamentOptionType::PRESET_FOR_PRINTER), 0, wxEXPAND | wxLEFT | wxRIGHT | wxBOTTOM, FromDIP(5));
     m_scrolled_sizer->Add(0, 0, 0, wxTOP, FromDIP(5));
@@ -1593,7 +1593,7 @@ CreatePrinterPresetDialog::CreatePrinterPresetDialog(wxWindow *parent)
 
     m_page1 = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, wxDefaultSize);
     m_page1->SetBackgroundColour(*wxWHITE);
-    m_page1->SetScrollRate(5, 5);
+    m_page1->SetScrollRate(5, FromDIP(20));
     m_page2 = new wxPanel(this, wxID_ANY, wxDefaultPosition, wxDefaultSize);    m_page2->SetBackgroundColour(*wxWHITE);
 
     create_printer_page1(m_page1);
@@ -2652,7 +2652,7 @@ wxBoxSizer *CreatePrinterPresetDialog::create_presets_template_item(wxWindow *pa
     wxBoxSizer *vertical_sizer = new wxBoxSizer(wxVERTICAL);
 
     m_scrolled_preset_window = new wxScrolledWindow(parent);
-    m_scrolled_preset_window->SetScrollRate(5, 5);
+    m_scrolled_preset_window->SetScrollRate(5, FromDIP(20));
     m_scrolled_preset_window->SetBackgroundColour(*wxWHITE);
     //m_scrolled_preset_window->SetMinSize(wxSize(FromDIP(1500), FromDIP(-1)));
     m_scrolled_preset_window->SetMaxSize(wxSize(FromDIP(1500), FromDIP(-1)));
@@ -4297,7 +4297,7 @@ wxBoxSizer *ExportConfigsDialog::create_select_printer(wxWindow *parent)
     optionSizer->SetMinSize(OPTION_SIZE);
     horizontal_sizer->Add(optionSizer, 0, wxEXPAND | wxALL, FromDIP(10));
     m_scrolled_preset_window = new wxScrolledWindow(parent);
-    m_scrolled_preset_window->SetScrollRate(5, 5);
+    m_scrolled_preset_window->SetScrollRate(5, FromDIP(20));
     m_scrolled_preset_window->SetBackgroundColour(*wxWHITE);
     m_scrolled_preset_window->SetMaxSize(wxSize(FromDIP(660), FromDIP(400)));
     m_scrolled_preset_window->SetSize(wxSize(FromDIP(660), FromDIP(400)));
@@ -4736,7 +4736,7 @@ wxBoxSizer *EditFilamentPresetDialog::create_preset_tree_sizer()
 {
     wxBoxSizer *filament_preset_tree_sizer = new wxBoxSizer(wxHORIZONTAL);
     m_preset_tree_window = new wxScrolledWindow(this);
-    m_preset_tree_window->SetScrollRate(5, 5);
+    m_preset_tree_window->SetScrollRate(5, FromDIP(20));
     m_preset_tree_window->SetBackgroundColour(PRINTER_LIST_COLOUR);
     m_preset_tree_window->SetMinSize(wxSize(-1, FromDIP(400)));
     m_preset_tree_window->SetMaxSize(wxSize(-1, FromDIP(300)));

src/slic3r/GUI/DeviceErrorDialog.cpp

@@ -39,7 +39,7 @@ DeviceErrorDialog::DeviceErrorDialog(MachineObject* obj, wxWindow* parent, wxWin
     m_line_top->SetBackgroundColour(wxColour(166, 169, 170));
 
     m_scroll_area = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxVSCROLL);
-    m_scroll_area->SetScrollRate(0, 5);
+    m_scroll_area->SetScrollRate(0, FromDIP(20));
     m_scroll_area->SetBackgroundColour(*wxWHITE);
     m_scroll_area->SetMinSize(wxSize(FromDIP(320), FromDIP(250)));
 

src/slic3r/GUI/GLModel.cpp

@@ -456,8 +456,9 @@ void GLModel::init_from(const indexed_triangle_set& its)
     data.reserve_vertices(3 * its.indices.size());
     data.reserve_indices(3 * its.indices.size());
 
-    // Read user preference: smooth normals enabled
-    const bool smooth_normals_enabled = wxGetApp().app_config != nullptr && wxGetApp().app_config->get_bool(SETTING_OPENGL_PHONG_SMOOTH_NORMALS);
+    // CLI thumbnail generation can initialize models without a wx application.
+    const bool smooth_normals_enabled = wxApp::GetInstance() != nullptr && wxGetApp().app_config != nullptr &&
+                                        wxGetApp().app_config->get_bool(SETTING_OPENGL_PHONG_SMOOTH_NORMALS);
 
     if (smooth_normals_enabled) {
         // Use per-corner smooth normals (via IGL)

src/slic3r/GUI/GUI_ObjectTable.cpp

@@ -2764,12 +2764,12 @@ ObjectTablePanel::ObjectTablePanel( wxWindow* parent, wxWindowID id, const wxPoi
     //m_object_grid->AssignTable(m_object_grid_table);
 
     m_side_window = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, wxSize(FromDIP(440),FromDIP(480)), wxVSCROLL);
-    m_side_window->SetScrollRate( 0, 5 );
+    m_side_window->SetScrollRate(0, FromDIP(20));
     m_page_sizer = new wxBoxSizer(wxVERTICAL);
     //m_page_top_sizer = new wxBoxSizer(wxHORIZONTAL);
     m_side_window->SetBackgroundColour(wxColour(0xff, 0xff, 0xff));
     m_side_window->SetSizer(m_page_sizer);
-    m_side_window->SetScrollbars(1, 20, 1, 2);
+    m_side_window->SetScrollbars(1, FromDIP(20), 1, 2);
     //m_side_window->ShowScrollbars(wxSHOW_SB_NEVER, wxSHOW_SB_NEVER);
 
     //m_side_window->EnableScrolling(false, true);

src/slic3r/GUI/HMSPanel.cpp

@@ -171,7 +171,7 @@ HMSPanel::HMSPanel(wxWindow *parent, wxWindowID id, const wxPoint &pos, const wx
 
     m_scrolledWindow = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxVSCROLL);
     m_scrolledWindow->SetBackgroundColour(*wxWHITE);
-    m_scrolledWindow->SetScrollRate(5, 5);
+    m_scrolledWindow->SetScrollRate(5, FromDIP(20));
 
     m_top_sizer = new wxBoxSizer(wxVERTICAL);
 

src/slic3r/GUI/KBShortcutsDialog.cpp

@@ -211,7 +211,7 @@ wxPanel* KBShortcutsDialog::create_page(wxWindow* parent, const Page& page)
     wxGetApp().UpdateDarkUI(scrollable_panel);
     const wxColour page_colour = StateColor::darkModeColorFor(*wxWHITE);
     scrollable_panel->SetBackgroundColour(page_colour);
-    scrollable_panel->SetScrollRate(0, 20);
+    scrollable_panel->SetScrollRate(0, FromDIP(20));
     const int page_width = FromDIP(PAGE_WIDTH);
     scrollable_panel->SetInitialSize(wxSize(page_width, FromDIP(450)));
 

src/slic3r/GUI/MixedFilamentDialog.cpp

@@ -1125,7 +1125,7 @@ wxBoxSizer* MixedFilamentDialog::create_recommendation_grid()
     outer->Add(title_sizer, 0, wxEXPAND | wxBOTTOM, FromDIP(4));
 
     m_recommendation_scroll = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, wxSize(-1, FromDIP(116)));
-    m_recommendation_scroll->SetScrollRate(0, 5);
+    m_recommendation_scroll->SetScrollRate(0, FromDIP(20));
     m_recommendation_scroll->SetBackgroundColour(StateColor::darkModeColorFor(wxColour("#F8F8F8")));
 
     m_recommendation_grid = new wxWrapSizer(wxHORIZONTAL, wxREMOVE_LEADING_SPACES);

src/slic3r/GUI/MsgDialog.cpp

@@ -194,9 +194,10 @@ Button* MsgDialog::add_button(wxWindowID btn_id, bool set_focus /*= false*/, con
     bd->button = btn;
     //bd->type   = type;
 
-    mb->id        = wxString::Format("%d", m_buttons.size());
+    // m_buttons.size() is a size_t, which does not match the %d conversion
+    mb->id        = wxString(std::to_string(m_buttons.size()));
     mb->buttondata = bd;
-    m_buttons[ wxString::Format("%d", m_buttons.size())] = mb;
+    m_buttons[ wxString(std::to_string(m_buttons.size()))] = mb;
     return btn;
 };
 
@@ -398,7 +399,7 @@ static void add_msg_content(wxWindow   *parent,
             }
             wxScrolledWindow *scrolledWindow = new wxScrolledWindow(parent, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxVSCROLL);
             scrolledWindow->SetBackgroundColour(*wxWHITE);
-            scrolledWindow->SetScrollRate(0, 20);
+            scrolledWindow->SetScrollRate(0, scrolledWindow->FromDIP(20));
             scrolledWindow->EnableScrolling(false, true);
             wxBoxSizer *sizer_scrolled = new wxBoxSizer(wxHORIZONTAL);
             Label *wrapped_text = new Label(scrolledWindow, font, msg, LB_AUTO_WRAP, wxSize(info_width, -1));

src/slic3r/GUI/MultiMachineManagerPage.cpp

@@ -398,7 +398,7 @@ MultiMachineManagerPage::MultiMachineManagerPage(wxWindow* parent)
 
     m_machine_list = new wxScrolledWindow(m_main_panel, wxID_ANY, wxDefaultPosition, wxDefaultSize);
     m_machine_list->SetBackgroundColour(*wxWHITE);
-    m_machine_list->SetScrollRate(0, 5);
+    m_machine_list->SetScrollRate(0, FromDIP(DEVICE_ITEM_MAX_HEIGHT));
     m_machine_list->SetMinSize(wxSize(FromDIP(DEVICE_ITEM_MAX_WIDTH), 10 * FromDIP(DEVICE_ITEM_MAX_HEIGHT)));
     m_machine_list->SetMaxSize(wxSize(FromDIP(DEVICE_ITEM_MAX_WIDTH), 10 * FromDIP(DEVICE_ITEM_MAX_HEIGHT)));
 

src/slic3r/GUI/MultiMachinePage.cpp

@@ -323,7 +323,7 @@ MultiMachinePickPage::MultiMachinePickPage(Plater* plater /*= nullptr*/)
     scroll_macine_list->SetMinSize(wxSize(FromDIP(400), FromDIP(10 * 30)));
     scroll_macine_list->SetMaxSize(wxSize(FromDIP(400), FromDIP(10 * 30)));
     scroll_macine_list->SetBackgroundColour(*wxWHITE);
-    scroll_macine_list->SetScrollRate(0, 5);
+    scroll_macine_list->SetScrollRate(0, FromDIP(DEVICE_ITEM_MAX_HEIGHT));
 
     sizer_machine_list = new wxBoxSizer(wxVERTICAL);
     scroll_macine_list->SetSizer(sizer_machine_list);

src/slic3r/GUI/MultiTaskManagerPage.cpp

@@ -675,7 +675,7 @@ LocalTaskManagerPage::LocalTaskManagerPage(wxWindow* parent)
 
     m_task_list = new wxScrolledWindow(m_main_panel, wxID_ANY, wxDefaultPosition, wxDefaultSize);
     m_task_list->SetBackgroundColour(*wxWHITE);
-    m_task_list->SetScrollRate(0, 5);
+    m_task_list->SetScrollRate(0, FromDIP(DEVICE_ITEM_MAX_HEIGHT));
     m_task_list->SetMinSize(wxSize(FromDIP(CLOUD_TASK_ITEM_MAX_WIDTH), FromDIP(DEVICE_ITEM_MAX_HEIGHT)));
     m_task_list->SetMaxSize(wxSize(FromDIP(CLOUD_TASK_ITEM_MAX_WIDTH), 10 * FromDIP(DEVICE_ITEM_MAX_HEIGHT)));
 
@@ -1056,7 +1056,7 @@ CloudTaskManagerPage::CloudTaskManagerPage(wxWindow* parent)
 
     m_task_list = new wxScrolledWindow(m_main_panel, wxID_ANY, wxDefaultPosition, wxDefaultSize);
     m_task_list->SetBackgroundColour(*wxWHITE);
-    m_task_list->SetScrollRate(0, 5);
+    m_task_list->SetScrollRate(0, FromDIP(DEVICE_ITEM_MAX_HEIGHT));
     m_task_list->SetMinSize(wxSize(FromDIP(CLOUD_TASK_ITEM_MAX_WIDTH), FromDIP(DEVICE_ITEM_MAX_HEIGHT)));
     m_task_list->SetMaxSize(wxSize(FromDIP(CLOUD_TASK_ITEM_MAX_WIDTH), 10 * FromDIP(DEVICE_ITEM_MAX_HEIGHT)));
 

src/slic3r/GUI/ObjColorDialog.cpp

@@ -355,7 +355,7 @@ ObjColorPanel::ObjColorPanel(wxWindow *parent, Slic3r::ObjDialogInOut &in_out, c
         //new color table
         m_scrolledWindow = new wxScrolledWindow(m_page_simple, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxVSCROLL);
         m_scrolledWindow->SetBackgroundColour(*wxWHITE);
-        m_scrolledWindow->SetScrollRate(0, 20);
+        m_scrolledWindow->SetScrollRate(0, FromDIP(20));
         m_scrolledWindow->EnableScrolling(false, true);
         m_scrolledWindow->ShowScrollbars(wxScrollbarVisibility::wxSHOW_SB_NEVER, wxScrollbarVisibility::wxSHOW_SB_DEFAULT);
         draw_new_table();

src/slic3r/GUI/ParamsPanel.cpp

@@ -391,7 +391,7 @@ ParamsPanel::ParamsPanel( wxWindow* parent, wxWindowID id, const wxPoint& pos, c
     m_page_sizer = new wxBoxSizer(wxVERTICAL);
 
     m_page_view->SetSizer(m_page_sizer);
-    m_page_view->SetScrollbars(1, 20, 1, 2);
+    m_page_view->SetScrollbars(1, FromDIP(20), 1, 2);
     //m_page_view->SetScrollRate( 5, 5 );
 
     if (m_mode_region)

src/slic3r/GUI/PartSkipDialog.cpp

@@ -148,7 +148,7 @@ PartSkipDialog::PartSkipDialog(wxWindow *parent) : DPIDialog(parent, wxID_ANY, _
     m_line->SetBackgroundColour(wxColor(238, 238, 238));
 
     m_list_view = new wxScrolledWindow(m_book_third_panel, wxID_ANY, wxDefaultPosition, wxSize(267, -1), wxHSCROLL | wxVSCROLL);
-    m_list_view->SetScrollRate(5, 5);
+    m_list_view->SetScrollRate(5, FromDIP(30));
     m_list_view->SetMinSize(wxSize(FromDIP(267), FromDIP(378)));
     m_list_view->SetMaxSize(wxSize(FromDIP(267), FromDIP(378)));
     m_list_view->SetBackgroundColour(*wxWHITE);

src/slic3r/GUI/Plater.cpp

@@ -3049,8 +3049,7 @@ Sidebar::Sidebar(Plater *parent)
 
     // add filament content
     p->m_panel_filament_content = new wxScrolledWindow(p->m_filament_area_wrapper, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxTAB_TRAVERSAL );
-    p->m_panel_filament_content->SetScrollbars(0, 100, 1, 2);
-    p->m_panel_filament_content->SetScrollRate(0, 5);
+    p->m_panel_filament_content->SetScrollRate(0, FromDIP(20));
     //p->m_panel_filament_content->SetMaxSize(wxSize{-1, FromDIP(174)});
     p->m_panel_filament_content->SetBackgroundColour(wxColour(255, 255, 255));
 
@@ -3142,8 +3141,7 @@ Sidebar::Sidebar(Plater *parent)
     // 3) Mixed filament rows, in their own scroll area so a long mixed list does not
     //    push the physical filament list off screen.
     p->m_mixed_scroll_area = new wxScrolledWindow(p->m_filament_area_wrapper, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxTAB_TRAVERSAL);
-    p->m_mixed_scroll_area->SetScrollbars(0, 100, 1, 2);
-    p->m_mixed_scroll_area->SetScrollRate(0, 5);
+    p->m_mixed_scroll_area->SetScrollRate(0, FromDIP(20));
     p->m_mixed_scroll_area->SetBackgroundColour(StateColor::darkModeColorFor(*wxWHITE));
     {
         auto* mix_scroll_sizer = new wxBoxSizer(wxVERTICAL);

src/slic3r/GUI/Preferences.cpp

@@ -1475,7 +1475,7 @@ void PreferencesDialog::create()
     app_config = get_app_config();
 
     m_parent = new MyscrolledWindow(this, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxVSCROLL);
-    m_parent->SetScrollRate(5, 5);
+    m_parent->SetScrollRate(0, FromDIP(20));
     m_parent->SetBackgroundColour(*wxWHITE);
 
     m_sizer_body = new wxBoxSizer(wxVERTICAL);

src/slic3r/GUI/PrintOptionsDialog.cpp

@@ -32,7 +32,7 @@ PrintOptionsDialog::PrintOptionsDialog(wxWindow* parent)
 
 
     m_scrollwindow = new wxScrolledWindow(this, wxID_ANY);
-    m_scrollwindow->SetScrollRate(0, FromDIP(10));
+    m_scrollwindow->SetScrollRate(0, FromDIP(20));
     m_scrollwindow->SetBackgroundColour(*wxWHITE);
     m_scrollwindow->SetMinSize(wxSize(FromDIP(480), wxDefaultCoord));
     m_scrollwindow->SetMaxSize(wxSize(FromDIP(480), wxDefaultCoord));

src/slic3r/GUI/PublishSettingsDialog.cpp

@@ -1225,7 +1225,7 @@ size_t PublishSettingsDialog::category_index_for(
     }
 
     category.scroll = new wxScrolledWindow(category.page, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxVSCROLL);
-    category.scroll->SetScrollRate(0, 10);
+    category.scroll->SetScrollRate(0, FromDIP(20));
     category.scroll->SetBackgroundColour(GetBackgroundColour());
     category.list_sizer = new wxBoxSizer(wxVERTICAL);
     category.scroll->SetSizer(category.list_sizer);

src/slic3r/GUI/ReleaseNote.cpp

@@ -76,7 +76,7 @@ ReleaseNoteDialog::ReleaseNoteDialog(Plater *plater /*= nullptr*/)
     m_sizer_right->Add(0, 0, 1, wxTOP, FromDIP(15));
 
     m_vebview_release_note = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, wxSize(FromDIP(560), FromDIP(430)), wxVSCROLL);
-    m_vebview_release_note->SetScrollRate(5, 5);
+    m_vebview_release_note->SetScrollRate(5, FromDIP(20));
     m_vebview_release_note->SetBackgroundColour(wxColour(0xF8, 0xF8, 0xF8));
     m_vebview_release_note->SetMaxSize(wxSize(FromDIP(560), FromDIP(430)));
 
@@ -142,7 +142,7 @@ UpdatePluginDialog::UpdatePluginDialog(wxWindow* parent /*= nullptr*/)
     operation_tips->SetMaxSize(wxSize(FromDIP(260), -1));
 
     m_vebview_release_note = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxVSCROLL);
-    m_vebview_release_note->SetScrollRate(5, 5);
+    m_vebview_release_note->SetScrollRate(5, FromDIP(20));
     m_vebview_release_note->SetBackgroundColour(wxColour(0xF8, 0xF8, 0xF8));
     m_vebview_release_note->SetMinSize(wxSize(FromDIP(260), FromDIP(150)));
     m_vebview_release_note->SetMaxSize(wxSize(FromDIP(260), FromDIP(150)));
@@ -277,7 +277,7 @@ UpdateVersionDialog::UpdateVersionDialog(wxWindow *parent)
     m_simplebook_release_note->SetBackgroundColour(wxColour(0xF8, 0xF8, 0xF8));
 
     m_scrollwindows_release_note = new wxScrolledWindow(m_simplebook_release_note, wxID_ANY, wxDefaultPosition, wxSize(FromDIP(560), FromDIP(430)), wxVSCROLL);
-    m_scrollwindows_release_note->SetScrollRate(5, 5);
+    m_scrollwindows_release_note->SetScrollRate(5, FromDIP(20));
     m_scrollwindows_release_note->SetBackgroundColour(wxColour(0xF8, 0xF8, 0xF8));
 
     //webview
@@ -538,7 +538,7 @@ SecondaryCheckDialog::SecondaryCheckDialog(wxWindow* parent, wxWindowID id, cons
     m_sizer_right->Add(0, 0, 1, wxTOP, FromDIP(15));
 
     m_vebview_release_note = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxVSCROLL);
-    m_vebview_release_note->SetScrollRate(0, 5);
+    m_vebview_release_note->SetScrollRate(0, FromDIP(20));
     m_vebview_release_note->SetBackgroundColour(*wxWHITE);
     m_vebview_release_note->SetMinSize(wxSize(FromDIP(400), FromDIP(380)));
     m_sizer_right->Add(m_vebview_release_note, 0, wxEXPAND | wxRIGHT | wxLEFT, FromDIP(15));
@@ -823,7 +823,7 @@ PrintErrorDialog::PrintErrorDialog(wxWindow* parent, wxWindowID id, const wxStri
     m_sizer_right->Add(0, 0, 1, wxTOP, FromDIP(5));
 
     m_vebview_release_note = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxVSCROLL);
-    m_vebview_release_note->SetScrollRate(0, 5);
+    m_vebview_release_note->SetScrollRate(0, FromDIP(20));
     m_vebview_release_note->SetBackgroundColour(*wxWHITE);
     m_vebview_release_note->SetMinSize(wxSize(FromDIP(320), FromDIP(250)));
     m_sizer_right->Add(m_vebview_release_note, 0, wxEXPAND | wxRIGHT | wxLEFT, FromDIP(15));
@@ -1122,7 +1122,7 @@ ConfirmBeforeSendDialog::ConfirmBeforeSendDialog(wxWindow* parent, wxWindowID id
     m_sizer_right->Add(0, 0, 1, wxTOP, FromDIP(15));
 
     m_vebview_release_note = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxVSCROLL);
-    m_vebview_release_note->SetScrollRate(0, 5);
+    m_vebview_release_note->SetScrollRate(0, FromDIP(20));
     m_vebview_release_note->SetBackgroundColour(*wxWHITE);
     m_vebview_release_note->SetMinSize(wxSize(FromDIP(400), FromDIP(380)));
     m_sizer_right->Add(m_vebview_release_note, 0, wxEXPAND | wxRIGHT | wxLEFT, FromDIP(15));

src/slic3r/GUI/SafetyOptionsDialog.cpp

@@ -31,7 +31,7 @@ SafetyOptionsDialog::SafetyOptionsDialog(wxWindow* parent)
     SetSize(FromDIP(480),FromDIP(320));
 
     m_scrollwindow = new wxScrolledWindow(this, wxID_ANY);
-    m_scrollwindow->SetScrollRate(0, FromDIP(10));
+    m_scrollwindow->SetScrollRate(0, FromDIP(20));
     m_scrollwindow->SetBackgroundColour(*wxWHITE);
     m_scrollwindow->SetMinSize(wxSize(FromDIP(480), wxDefaultCoord));
     m_scrollwindow->SetMaxSize(wxSize(FromDIP(480), wxDefaultCoord));
@@ -272,4 +272,4 @@ void SafetyOptionsDialog::show_idel_heating_toast(const wxString &text)
     m_idel_heating_toast_timer.StartOnce(3000);
 }
 
-}} // namespace Slic3r::GUI
+}} // namespace Slic3r::GUI

src/slic3r/GUI/SelectMachine.cpp

@@ -148,7 +148,7 @@ SelectMachineDialog::SelectMachineDialog(Plater *plater)
 
     wxBoxSizer* m_scroll_sizer = new wxBoxSizer(wxVERTICAL);
     m_scroll_area              = new wxScrolledWindow(this);
-    m_scroll_area->SetScrollRate(0, 20);
+    m_scroll_area->SetScrollRate(0, FromDIP(20));
     m_scroll_area->SetBackgroundColour(m_colour_def_color);
     m_scroll_area->SetMinSize(wxSize(FromDIP(700), FromDIP(600)));
     m_scroll_area->SetMaxSize(wxSize(FromDIP(700), FromDIP(600)));
@@ -707,7 +707,7 @@ SelectMachineDialog::SelectMachineDialog(Plater *plater)
     //show bind failed info
     m_sw_print_failed_info = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, wxSize(SELECT_MACHINE_DIALOG_SIMBOOK_SIZE2.x, FromDIP(125)), wxVSCROLL);
     m_sw_print_failed_info->SetBackgroundColour(*wxWHITE);
-    m_sw_print_failed_info->SetScrollRate(0, 5);
+    m_sw_print_failed_info->SetScrollRate(0, FromDIP(20));
     m_sw_print_failed_info->SetMinSize(wxSize(SELECT_MACHINE_DIALOG_SIMBOOK_SIZE2.x, FromDIP(125)));
     m_sw_print_failed_info->SetMaxSize(wxSize(SELECT_MACHINE_DIALOG_SIMBOOK_SIZE2.x, FromDIP(125)));
 

src/slic3r/GUI/SelectMachinePop.cpp

@@ -327,7 +327,7 @@ SelectMachinePopup::SelectMachinePopup(wxWindow *parent)
     m_scrolledWindow = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, SELECT_MACHINE_LIST_SIZE, wxHSCROLL | wxVSCROLL);
     m_scrolledWindow->SetBackgroundColour(*wxWHITE);
     m_scrolledWindow->SetMinSize(SELECT_MACHINE_LIST_SIZE);
-    m_scrolledWindow->SetScrollRate(0, 5);
+    m_scrolledWindow->SetScrollRate(0, SELECT_MACHINE_ITEM_SIZE.y);
     auto m_sizxer_scrolledWindow = new wxBoxSizer(wxVERTICAL);
     m_scrolledWindow->SetSizer(m_sizxer_scrolledWindow);
     m_scrolledWindow->Layout();

src/slic3r/GUI/SendMultiMachinePage.cpp

@@ -278,7 +278,7 @@ SendMultiMachinePage::SendMultiMachinePage(Plater* plater)
 
     m_main_scroll = new ScrolledWindow(this, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxVSCROLL);
     m_main_scroll->SetBackgroundColour(*wxWHITE);
-    m_main_scroll->SetScrollRate(5, 5);
+    m_main_scroll->SetScrollRate(5, FromDIP(20));
 
     m_sizer_body = new wxBoxSizer(wxVERTICAL);
     m_main_page = create_page();
@@ -1353,7 +1353,7 @@ wxPanel* SendMultiMachinePage::create_page()
 
     scroll_macine_list = new wxScrolledWindow(main_page, wxID_ANY, wxDefaultPosition, wxSize(FromDIP(800), FromDIP(300)), wxHSCROLL | wxVSCROLL);
     scroll_macine_list->SetBackgroundColour(*wxWHITE);
-    scroll_macine_list->SetScrollRate(5, 5);
+    scroll_macine_list->SetScrollRate(5, FromDIP(SEND_ITEM_MAX_HEIGHT));
     scroll_macine_list->SetMinSize(wxSize(FromDIP(DEVICE_ITEM_MAX_WIDTH), 10 * FromDIP(SEND_ITEM_MAX_HEIGHT)));
     scroll_macine_list->SetMaxSize(wxSize(FromDIP(DEVICE_ITEM_MAX_WIDTH), 10 * FromDIP(SEND_ITEM_MAX_HEIGHT)));
 

src/slic3r/GUI/SendToPrinter.cpp

@@ -384,7 +384,7 @@ SendToPrinterDialog::SendToPrinterDialog(Plater *plater)
     //show bind failed info
     m_sw_print_failed_info = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, wxSize(FromDIP(380), FromDIP(125)), wxVSCROLL);
     m_sw_print_failed_info->SetBackgroundColour(*wxWHITE);
-    m_sw_print_failed_info->SetScrollRate(0, 5);
+    m_sw_print_failed_info->SetScrollRate(0, FromDIP(20));
     m_sw_print_failed_info->SetMinSize(wxSize(FromDIP(380), FromDIP(125)));
     m_sw_print_failed_info->SetMaxSize(wxSize(FromDIP(380), FromDIP(125)));
 

src/slic3r/GUI/StatusPanel.cpp

@@ -1302,7 +1302,7 @@ void PrintingTaskPanel::set_star_count(int star_count)
 StatusBasePanel::StatusBasePanel(wxWindow *parent, wxWindowID id, const wxPoint &pos, const wxSize &size, long style, const wxString &name)
     : wxScrolledWindow(parent, id, pos, size, wxHSCROLL | wxVSCROLL)
 {
-    this->SetScrollRate(25, 25);
+    SetScrollRate(25, FromDIP(20));
     Slic3r::DeviceManager* dev = Slic3r::GUI::wxGetApp().getDeviceManager();
     if (!dev) return;
     obj = dev->get_selected_machine();

src/slic3r/GUI/SyncAmsInfoDialog.cpp

@@ -700,7 +700,7 @@ SyncAmsInfoDialog::SyncAmsInfoDialog(wxWindow *parent, SyncInfo &info) :
     //wxBoxSizer *m_scroll_sizer = new wxBoxSizer(wxVERTICAL);
     m_scrolledWindow = new wxScrolledWindow(m_show_page, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxVSCROLL);
     m_scrolledWindow->SetBackgroundColour(*wxWHITE);
-    m_scrolledWindow->SetScrollRate(0, 20);
+    m_scrolledWindow->SetScrollRate(0, FromDIP(20));
     m_scrolledWindow->SetMinSize(wxSize(-1, SyncAmsInfoDialogHeightMAX));
     m_scrolledWindow->SetMaxSize(wxSize(-1, SyncAmsInfoDialogHeightMAX));
     m_scrolledWindow->EnableScrolling(false,true);

src/slic3r/GUI/TextureImportDialog.cpp

@@ -534,7 +534,7 @@ public:
 
         m_content = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxVSCROLL);
         m_content->SetBackgroundColour(pop_bg);
-        m_content->SetScrollRate(0, FromDIP(5));
+        m_content->SetScrollRate(0, FromDIP(20));
         auto* outer = new wxBoxSizer(wxVERTICAL);
 
         const int pop_w   = std::max(FromDIP(213), popup_width);
@@ -2274,7 +2274,7 @@ void TextureImportDialog::build_mapping_panel(wxWindow* parent, wxSizer* sizer)
 
     m_mapping_scroll = new wxScrolledWindow(parent, wxID_ANY, wxDefaultPosition,
                                              wxSize(-1, FromDIP(300)));
-    m_mapping_scroll->SetScrollRate(0, FromDIP(10));
+    m_mapping_scroll->SetScrollRate(0, FromDIP(20));
     m_mapping_scroll->SetBackgroundColour(StateColor::darkModeColorFor(*wxWHITE));
     m_mapping_scroll->Bind(wxEVT_MOUSEWHEEL, &TextureImportDialog::dismiss_filament_popup_on_wheel, this);
 
@@ -4335,7 +4335,7 @@ void TextureImportDialog::on_dpi_changed(const wxRect&)
 
     if (m_mapping_scroll) {
         m_mapping_scroll->SetMinSize(wxSize(-1, FromDIP(300)));
-        m_mapping_scroll->SetScrollRate(0, FromDIP(10));
+        m_mapping_scroll->SetScrollRate(0, FromDIP(20));
     }
 
     if (m_btn_skip) {

src/slic3r/GUI/UnsavedChangesDialog.cpp

@@ -942,7 +942,7 @@ void UnsavedChangesDialog::build(Preset::Type type, PresetCollection *dependent_
     m_sizer_tab->Add(m_table_top, 1, 0, 0);
 
     m_scrolledWindow = new wxScrolledWindow(m_panel_tab, wxID_ANY, wxDefaultPosition, UNSAVE_CHANGE_DIALOG_SCROLL_WINDOW_SIZE,  wxNO_BORDER|wxVSCROLL);
-    m_scrolledWindow->SetScrollRate(0, 5);
+    m_scrolledWindow->SetScrollRate(0, FromDIP(20));
     m_scrolledWindow->SetBackgroundColour(GREY200);
     m_sizer_bottom = new wxBoxSizer(wxVERTICAL);
     m_sizer_bottom->Add(m_scrolledWindow, 1, wxEXPAND, 0);

src/slic3r/GUI/UpdateDialogs.cpp

@@ -130,7 +130,7 @@ MsgUpdateConfig::MsgUpdateConfig(const std::vector<Update> &updates, bool force_
     m_sizer_right->Add(0, 0, 1, wxTOP, FromDIP(15));
 
     auto m_scrollwindw_release_note = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, wxSize(FromDIP(560), FromDIP(430)),wxVSCROLL);
-    m_scrollwindw_release_note->SetScrollRate(0, 5);
+    m_scrollwindw_release_note->SetScrollRate(0, FromDIP(20));
     m_scrollwindw_release_note->SetBackgroundColour(wxColour(0xF8, 0xF8, 0xF8));
     m_scrollwindw_release_note->SetMaxSize(wxSize(FromDIP(560), FromDIP(430)));
     m_scrollwindw_release_note->SetWindowStyle(wxVSCROLL);

src/slic3r/GUI/UpgradePanel.cpp

@@ -1629,7 +1629,7 @@ UpgradePanel::UpgradePanel(wxWindow *parent, wxWindowID id, const wxPoint &pos,
     auto m_main_sizer = new wxBoxSizer(wxVERTICAL);
 
     m_scrolledWindow = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxVSCROLL);
-    m_scrolledWindow->SetScrollRate(5, 25);
+    m_scrolledWindow->SetScrollRate(5, FromDIP(20));
 
     m_machine_list_sizer = new wxBoxSizer(wxVERTICAL);
 

src/slic3r/GUI/Widgets/CheckList.cpp

@@ -62,7 +62,7 @@ CheckList::CheckList(
 
     s_sizer       = new wxBoxSizer(wxVERTICAL);
     m_scroll_area = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, wxDefaultSize, scroll_style);
-    m_scroll_area->SetScrollRate(0, 10);
+    m_scroll_area->SetScrollRate(0, FromDIP(20));
     m_scroll_area->SetSizer(s_sizer);
     m_scroll_area->SetBackgroundColour(parent->GetBackgroundColour());
     m_scroll_area->Bind(wxEVT_RIGHT_DOWN, &CheckList::ShowMenu, this);
@@ -223,4 +223,4 @@ void CheckList::ShowMenu(wxMouseEvent &evt)
     wxPoint screen_pos = src->ClientToScreen(evt.GetPosition());
     wxPoint local_pos  = ScreenToClient(screen_pos);
     PopupMenu(&m, local_pos);
-}
+}

src/slic3r/GUI/Widgets/ProgressDialog.cpp

@@ -199,7 +199,7 @@ bool ProgressDialog::Create(const wxString &title, const wxString &message, int
         m_sizer_main->Add(m_simplebook, 1, wxEXPAND | wxLEFT | wxRIGHT, FromDIP(28));
     } else {
         m_msg_scrolledWindow = new wxScrolledWindow( this, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxVSCROLL );
-        m_msg_scrolledWindow->SetScrollRate(0,5);
+        m_msg_scrolledWindow->SetScrollRate(0, FromDIP(20));
         wxBoxSizer* m_msg_sizer= new wxBoxSizer(wxVERTICAL);
 
         m_msg = new wxStaticText(m_msg_scrolledWindow, wxID_ANY, wxEmptyString, wxDefaultPosition, wxSize(PROGRESSDIALOG_SIMPLEBOOK_SIZE.x, -1), 0);

src/slic3r/GUI/wxExtensions.cpp

@@ -1222,7 +1222,7 @@ ImageTransientPopup::ImageTransientPopup( wxWindow *parent, bool scrolled, wxBit
         m_panel->SetSize(300, 300);
 
         // And also actually enable them.
-        m_panel->SetScrollRate(10, 10);
+        m_panel->SetScrollRate(10, FromDIP(20));
     }
     else
     {

tests/cli/CMakeLists.txt

@@ -15,3 +15,10 @@ set_tests_properties(cli_strict_mode PROPERTIES
     LABELS "CLI;RequiresApp"
     SKIP_RETURN_CODE 77
     TIMEOUT 900)
+
+add_test(NAME cli_malformed_input
+    COMMAND bash ${CMAKE_CURRENT_SOURCE_DIR}/test_cli_malformed_input.sh $<TARGET_FILE:OrcaSlicer> ${ORCA_CLI_TEST_PYTHON})
+set_tests_properties(cli_malformed_input PROPERTIES
+    LABELS "CLI;RequiresApp"
+    SKIP_RETURN_CODE 77
+    TIMEOUT 900)

tests/cli/test_cli_malformed_input.sh

@@ -0,0 +1,207 @@
+#!/usr/bin/env bash
+# End-to-end checks that malformed CLI input fails cleanly, or loads, instead of crashing the
+# orca-slicer binary. Each case lives inline in CLI::run(), so only the binary can reach it.
+#
+# - A project whose inherits_group does not have one entry per filament plus the process and
+#   printer entries still loads.
+# - --slice N --arrange 1 on a project without plate metadata slices plate N.
+# - An assemble list object with an empty filament list, or a negative filament id, is rejected
+#   as a config error.
+# - --assemble with no input model is rejected as invalid parameters.
+#
+# usage: test_cli_malformed_input.sh <orca-slicer binary> <python3>
+set -u
+
+BIN="${1:-}"
+PY="${2:-python3}"
+# 77 is the test's SKIP_RETURN_CODE.
+[ -x "$BIN" ] || { echo "SKIP: orca-slicer binary not found: $BIN"; exit 77; }
+
+# From src/libslic3r/Utils.hpp. main() returns them, so the shell sees them modulo 256.
+CLI_SUCCESS=0
+CLI_INVALID_PARAMS=-2
+CLI_CONFIG_FILE_ERROR=-5
+
+WORK="$(mktemp -d "${TMPDIR:-/tmp}/orca-cli-malformed.XXXXXX")"
+trap 'rm -rf "$WORK"' EXIT
+mkdir -p "$WORK/datadir"
+
+# Standalone presets: without "inherits" the CLI loads them as-is, with no preset bundle.
+cat > "$WORK/machine.json" <<'EOF'
+{
+    "type": "machine",
+    "from": "User",
+    "name": "CLI malformed input test printer",
+    "printable_area": ["0x0", "200x0", "200x200", "0x200"],
+    "printable_height": "100",
+    "layer_change_gcode": "G92 E0"
+}
+EOF
+cat > "$WORK/process.json" <<'EOF'
+{
+    "type": "process",
+    "from": "User",
+    "name": "CLI malformed input test process"
+}
+EOF
+cat > "$WORK/filament.json" <<'EOF'
+{
+    "type": "filament",
+    "from": "User",
+    "name": "CLI malformed input test filament"
+}
+EOF
+
+"$PY" - "$WORK/cube.stl" <<'EOF'
+import sys
+
+v = [(x, y, z) for z in (0, 10) for y in (0, 10) for x in (0, 10)]
+with open(sys.argv[1], "w") as f:
+    f.write("solid cube\n")
+    # Faces wound counter-clockwise seen from outside: -z, +z, -y, +y, -x, +x.
+    for a, b, c, d in ((0, 2, 3, 1), (4, 5, 7, 6), (0, 1, 5, 4), (2, 6, 7, 3), (0, 4, 6, 2), (1, 3, 7, 5)):
+        for tri in ((a, b, c), (a, c, d)):
+            f.write("facet normal 0 0 0\nouter loop\n")
+            for i in tri:
+                f.write("vertex %g %g %g\n" % v[i])
+            f.write("endloop\nendfacet\n")
+    f.write("endsolid cube\n")
+EOF
+
+fails=0
+fail() { echo "FAIL: $*"; fails=$((fails + 1)); }
+
+# run <tag> [option...]: run into $WORK/<tag>, keeping the log and the shell status there.
+run() {
+    local out="$WORK/$1"; shift
+    mkdir -p "$out"
+    timeout 300 "$BIN" --datadir "$WORK/datadir" --outputdir "$out" "$@" > "$out/log" 2>&1
+    echo $? > "$out/status"
+}
+
+# run_presets <tag> [option...]: run with the standalone presets loaded.
+run_presets() {
+    local tag="$1"; shift
+    run "$tag" --load-settings "$WORK/machine.json;$WORK/process.json" --load-filaments "$WORK/filament.json" "$@"
+}
+
+# expect_status <tag> <cli code>
+expect_status() {
+    local got; got="$(cat "$WORK/$1/status")"
+    [ "$got" -eq $(( $2 & 255 )) ] || fail "$1: shell status $got, want $(( $2 & 255 )) (code $2)"
+}
+
+# expect_result <tag> <return_code>: a failing run must also carry an error_string.
+expect_result() {
+    "$PY" - "$WORK/$1/result.json" "$2" <<'EOF' || fail "$1: result.json"
+import json, sys
+
+try:
+    with open(sys.argv[1]) as f:
+        result = json.load(f)
+except (OSError, ValueError) as e:
+    sys.exit("cannot read %s: %s" % (sys.argv[1], e))
+want_rc = int(sys.argv[2])
+if result.get("return_code") != want_rc:
+    sys.exit("return_code %r, want %d" % (result.get("return_code"), want_rc))
+if want_rc != 0 and not result.get("error_string"):
+    sys.exit("no error_string")
+EOF
+}
+
+# expect_log <tag> <text>
+expect_log() {
+    grep -qF -- "$2" "$WORK/$1/log" || fail "$1: log does not mention \"$2\""
+}
+
+# expect_gcode <tag>
+expect_gcode() {
+    compgen -G "$WORK/$1/*.gcode" > /dev/null || fail "$1: no G-code was exported"
+}
+
+# rewrite_3mf <in> <out> inherits <json list> | no-plates
+rewrite_3mf() {
+    "$PY" - "$@" <<'EOF'
+import json, re, sys, zipfile
+
+src, dst, mode = sys.argv[1:4]
+with zipfile.ZipFile(src) as zin, zipfile.ZipFile(dst, "w", zipfile.ZIP_DEFLATED) as zout:
+    for info in zin.infolist():
+        data = zin.read(info.filename)
+        if mode == "inherits" and info.filename == "Metadata/project_settings.config":
+            config = json.loads(data)
+            config["inherits_group"] = json.loads(sys.argv[4])
+            data = json.dumps(config, indent=4).encode()
+        elif mode == "no-plates":
+            if re.match(r"Metadata/plate_\d+\.", info.filename):
+                continue
+            if info.filename == "Metadata/model_settings.config":
+                data = re.sub(rb"\s*<plate>.*?</plate>", b"", data, flags=re.S)
+        zout.writestr(info, data)
+EOF
+}
+
+# assemble_list <file> <filaments json>
+assemble_list() {
+    cat > "$1" <<EOF
+{"plates": [{"plate_name": "p", "need_arrange": false,
+             "objects": [{"path": "$WORK/cube.stl", "count": 1, "filaments": $2,
+                          "pos_x": [100], "pos_y": [100]}]}]}
+EOF
+}
+
+echo "== a one-filament project exported by the CLI is the base for the project cases"
+run_presets export --slice 0 --export-3mf project.3mf "$WORK/cube.stl"
+expect_status export $CLI_SUCCESS
+[ -f "$WORK/export/project.3mf" ] || { echo "FAIL: project export failed"; tail -n 40 "$WORK/export/log"; exit 1; }
+
+echo "== an inherits_group of the wrong length still loads"
+for group in '[]' '[""]' '["", "", "", "", ""]'; do
+    tag="inherits_$("$PY" -c 'import json, sys; print(len(json.loads(sys.argv[1])))' "$group")"
+    rewrite_3mf "$WORK/export/project.3mf" "$WORK/$tag.3mf" inherits "$group"
+    run "$tag" --info "$WORK/$tag.3mf"
+    expect_status "$tag" $CLI_SUCCESS
+    expect_log "$tag" "inherits_group"
+done
+
+echo "== --slice 1 --arrange 1 slices a project without plate metadata"
+rewrite_3mf "$WORK/export/project.3mf" "$WORK/no_plates.3mf" no-plates
+run_presets no_plates --slice 1 --arrange 1 "$WORK/no_plates.3mf"
+expect_status no_plates $CLI_SUCCESS
+expect_result no_plates $CLI_SUCCESS
+expect_gcode no_plates
+
+echo "== an assemble list with a valid filament id slices"
+assemble_list "$WORK/assemble_valid.json" '[1]'
+run_presets assemble_valid --slice 0 --load-assemble-list "$WORK/assemble_valid.json"
+expect_status assemble_valid $CLI_SUCCESS
+expect_gcode assemble_valid
+
+echo "== an assemble list with an empty filament list or a negative filament id is rejected"
+for filaments in '[]' '[-1]'; do
+    if [ "$filaments" = '[]' ]; then tag=assemble_empty; else tag=assemble_negative; fi
+    assemble_list "$WORK/$tag.json" "$filaments"
+    run_presets "$tag" --slice 0 --load-assemble-list "$WORK/$tag.json"
+    expect_status "$tag" $CLI_CONFIG_FILE_ERROR
+    expect_result "$tag" $CLI_CONFIG_FILE_ERROR
+done
+
+echo "== --assemble with no input model is rejected"
+for action in "--slice 0" "--export-3mf out.3mf"; do
+    tag="assemble_no_input_${action%% *}"
+    tag="${tag//-/}"
+    # shellcheck disable=SC2086
+    run_presets "$tag" --assemble $action
+    expect_status "$tag" $CLI_INVALID_PARAMS
+    expect_result "$tag" $CLI_INVALID_PARAMS
+    expect_log "$tag" "--assemble"
+done
+
+if [ "$fails" -ne 0 ]; then
+    for log in "$WORK"/*/log; do
+        echo "--- $log"
+        tail -n 40 "$log"
+    done
+    exit 1
+fi
+echo "PASS"

tests/libslic3r/CMakeLists.txt

@@ -7,6 +7,7 @@ add_executable(${_TEST_NAME}_tests
     test_appconfig.cpp
     test_arachne_walls.cpp
     test_arrange.cpp
+    test_assemble_list.cpp
     test_bambu_networking.cpp
     test_buildvolume.cpp
     test_calib.cpp

tests/libslic3r/test_assemble_list.cpp

@@ -0,0 +1,266 @@
+#include <catch2/catch_all.hpp>
+
+#include "libslic3r/Format/AssembleList.hpp"
+
+#include "test_utils.hpp"
+
+#include <boost/nowide/fstream.hpp>
+#include <nlohmann/json.hpp>
+
+#include <string>
+#include <vector>
+
+using namespace Slic3r;
+using Catch::Matchers::WithinAbs;
+using nlohmann::json;
+
+static constexpr int max_plates = 36;
+
+static AssembleListResult load_text(const std::string &text, std::vector<assemble_plate_info_t> &plates)
+{
+    ScopedTemporaryFile file(".json");
+    {
+        boost::nowide::ofstream out(file.string());
+        out << text;
+    }
+    return load_assemble_plate_list(file.string(), plates, max_plates);
+}
+
+static AssembleListResult load_json(const json &root)
+{
+    std::vector<assemble_plate_info_t> plates;
+    return load_text(root.dump(), plates);
+}
+
+// One plate with one object of three clones, which every optional field accepts.
+static json valid_list()
+{
+    return json::parse(R"({
+        "plates": [{
+            "plate_name": "plate",
+            "need_arrange": false,
+            "objects": [{
+                "path": "cube.stl",
+                "count": 3,
+                "filaments": [1],
+                "height_ranges": [{ "min_z": 0, "max_z": 5, "range_params": { "layer_height": "0.1" } }]
+            }],
+            "assembled_params": [{
+                "assemble_index": 1,
+                "height_ranges": [{ "min_z": 0, "max_z": 5, "range_params": { "layer_height": "0.1" } }]
+            }]
+        }]
+    })");
+}
+
+TEST_CASE("A valid assemble list parses into its plates and objects", "[AssembleList]")
+{
+    const std::string text = R"({
+        "plates": [
+            {
+                "plate_name": "first",
+                "need_arrange": true,
+                "plate_params": { "curr_bed_type": "Textured PEI Plate" },
+                "objects": [
+                    {
+                        "path": "a.stl",
+                        "count": 2,
+                        "filaments": [1, 3],
+                        "assemble_index": [1],
+                        "pos_x": [10.5, 20.5],
+                        "pos_y": [30],
+                        "pos_z": [0, 1],
+                        "print_params": { "sparse_infill_density": "30%" },
+                        "height_ranges": [{ "min_z": 1.5, "max_z": 4, "range_params": { "layer_height": "0.12" } }]
+                    },
+                    { "path": "b.stl", "count": 1, "filaments": [0] }
+                ],
+                "assembled_params": [{ "assemble_index": 1, "print_params": { "wall_loops": "4" } }]
+            },
+            {
+                "plate_name": "second",
+                "need_arrange": false,
+                "objects": [{ "path": "c.stl", "count": 1, "filaments": [2] }]
+            }
+        ]
+    })";
+    std::vector<assemble_plate_info_t> plates;
+    REQUIRE(load_text(text, plates) == AssembleListResult::Success);
+    REQUIRE(plates.size() == 2);
+
+    const assemble_plate_info_t &first = plates[0];
+    CHECK(first.plate_name == "first");
+    CHECK(first.need_arrange);
+    CHECK(first.plate_params.at("curr_bed_type") == "Textured PEI Plate");
+    REQUIRE(first.assemble_obj_list.size() == 2);
+
+    const assemble_object_info_t &a = first.assemble_obj_list[0];
+    CHECK(a.path == "a.stl");
+    CHECK(a.count == 2);
+    CHECK(a.filaments == std::vector<int>{1, 3});
+    CHECK(a.assemble_index == std::vector<int>{1});
+    REQUIRE(a.pos_x.size() == 2);
+    CHECK_THAT(a.pos_x[0], WithinAbs(10.5, 1e-6));
+    CHECK_THAT(a.pos_x[1], WithinAbs(20.5, 1e-6));
+    REQUIRE(a.pos_y.size() == 1);
+    CHECK_THAT(a.pos_y[0], WithinAbs(30., 1e-6));
+    REQUIRE(a.pos_z.size() == 2);
+    CHECK_THAT(a.pos_z[1], WithinAbs(1., 1e-6));
+    CHECK(a.print_params.at("sparse_infill_density") == "30%");
+    REQUIRE(a.height_ranges.size() == 1);
+    CHECK_THAT(a.height_ranges[0].min_z, WithinAbs(1.5, 1e-6));
+    CHECK_THAT(a.height_ranges[0].max_z, WithinAbs(4., 1e-6));
+    CHECK(a.height_ranges[0].range_params.at("layer_height") == "0.12");
+
+    const assemble_object_info_t &b = first.assemble_obj_list[1];
+    CHECK(b.path == "b.stl");
+    CHECK(b.count == 1);
+    CHECK(b.filaments == std::vector<int>{0});
+    CHECK(b.pos_x.empty());
+    CHECK(b.assemble_index.empty());
+
+    REQUIRE(first.assembled_param_list.count(1) == 1);
+    CHECK(first.assembled_param_list.at(1).print_params.at("wall_loops") == "4");
+
+    const assemble_plate_info_t &second = plates[1];
+    CHECK(second.plate_name == "second");
+    CHECK_FALSE(second.need_arrange);
+    REQUIRE(second.assemble_obj_list.size() == 1);
+    CHECK(second.assemble_obj_list[0].path == "c.stl");
+    CHECK(second.assemble_obj_list[0].filaments == std::vector<int>{2});
+}
+
+TEST_CASE("The unmodified fixture used by the rule tests is accepted", "[AssembleList]")
+{
+    CHECK(load_json(valid_list()) == AssembleListResult::Success);
+}
+
+TEST_CASE("An object with an empty filament list is rejected", "[AssembleList]")
+{
+    json root = valid_list();
+    root["plates"][0]["objects"][0]["filaments"] = json::array();
+    CHECK(load_json(root) == AssembleListResult::ConfigError);
+}
+
+TEST_CASE("An object with a negative filament id is rejected", "[AssembleList]")
+{
+    json root = valid_list();
+    root["plates"][0]["objects"][0]["filaments"] = GENERATE(json::array({-1}), json::array({1, -2, 1}));
+    CAPTURE(root["plates"][0]["objects"][0]["filaments"].dump());
+    CHECK(load_json(root) == AssembleListResult::ConfigError);
+}
+
+TEST_CASE("Filament id 0 is accepted", "[AssembleList]")
+{
+    json root = valid_list();
+    root["plates"][0]["objects"][0]["filaments"] = GENERATE(json::array({0}), json::array({0, 1, 0}));
+    CAPTURE(root["plates"][0]["objects"][0]["filaments"].dump());
+    CHECK(load_json(root) == AssembleListResult::Success);
+}
+
+TEST_CASE("Per-clone lists need one entry or one per clone", "[AssembleList]")
+{
+    // The fixture object has 3 clones.
+    const std::string key  = GENERATE("filaments", "assemble_index", "pos_x", "pos_y", "pos_z");
+    const size_t      size = GENERATE(1, 2, 3, 4);
+    CAPTURE(key, size);
+
+    json root = valid_list();
+    root["plates"][0]["objects"][0][key] = json(std::vector<int>(size, 1));
+    const AssembleListResult expected = (size == 1 || size == 3) ? AssembleListResult::Success : AssembleListResult::ConfigError;
+    CHECK(load_json(root) == expected);
+}
+
+TEST_CASE("An empty optional per-clone list is accepted", "[AssembleList]")
+{
+    const std::string key = GENERATE("assemble_index", "pos_x", "pos_y", "pos_z");
+    CAPTURE(key);
+
+    json root = valid_list();
+    root["plates"][0]["objects"][0][key] = json::array();
+    CHECK(load_json(root) == AssembleListResult::Success);
+}
+
+// Fields read through a const reference (plate_name, need_arrange, objects, path, count) are
+// looked up without a presence check, so only their wrong-type case is covered here.
+TEST_CASE("A missing required field is rejected", "[AssembleList]")
+{
+    const std::string pointer = GENERATE("/plates",
+                                         "/plates/0/objects/0/filaments",
+                                         "/plates/0/objects/0/height_ranges/0/min_z",
+                                         "/plates/0/objects/0/height_ranges/0/max_z",
+                                         "/plates/0/objects/0/height_ranges/0/range_params",
+                                         "/plates/0/assembled_params/0/assemble_index",
+                                         "/plates/0/assembled_params/0/height_ranges/0/min_z",
+                                         "/plates/0/assembled_params/0/height_ranges/0/max_z",
+                                         "/plates/0/assembled_params/0/height_ranges/0/range_params");
+    CAPTURE(pointer);
+
+    json root = valid_list();
+    const json::json_pointer ptr(pointer);
+    root[ptr.parent_pointer()].erase(ptr.back());
+    CHECK(load_json(root) == AssembleListResult::ConfigError);
+}
+
+TEST_CASE("A field of the wrong type is rejected", "[AssembleList]")
+{
+    const std::string pointer = GENERATE("/plates/0/plate_name",
+                                         "/plates/0/need_arrange",
+                                         "/plates/0/objects/0/path",
+                                         "/plates/0/objects/0/count",
+                                         "/plates/0/objects/0/filaments",
+                                         "/plates/0/objects/0/pos_x");
+    CAPTURE(pointer);
+
+    json root = valid_list();
+    root[json::json_pointer(pointer)] = json::object();
+    CHECK(load_json(root) == AssembleListResult::ConfigError);
+}
+
+TEST_CASE("A plate or clone count out of range is rejected", "[AssembleList]")
+{
+    SECTION("no plates")
+    {
+        json root = valid_list();
+        root["plates"] = json::array();
+        CHECK(load_json(root) == AssembleListResult::ConfigError);
+    }
+    SECTION("more plates than the limit")
+    {
+        json root = valid_list();
+        const json plate = root["plates"][0];
+        for (int i = 1; i < max_plates; ++i)
+            root["plates"].push_back(plate);
+        CHECK(load_json(root) == AssembleListResult::Success);
+        root["plates"].push_back(plate);
+        CHECK(load_json(root) == AssembleListResult::ConfigError);
+    }
+    SECTION("a plate with no objects")
+    {
+        json root = valid_list();
+        root["plates"][0]["objects"] = json::array();
+        CHECK(load_json(root) == AssembleListResult::ConfigError);
+    }
+    SECTION("a clone count below 1")
+    {
+        json root = valid_list();
+        root["plates"][0]["objects"][0]["count"] = GENERATE(0, -1);
+        CAPTURE(root["plates"][0]["objects"][0]["count"].dump());
+        CHECK(load_json(root) == AssembleListResult::ConfigError);
+    }
+}
+
+TEST_CASE("Malformed JSON is rejected", "[AssembleList]")
+{
+    const std::string text = GENERATE(std::string(), std::string("{\"plates\": ["), std::string("not json"));
+    CAPTURE(text);
+    std::vector<assemble_plate_info_t> plates;
+    CHECK(load_text(text, plates) == AssembleListResult::ConfigError);
+}
+
+TEST_CASE("A missing file is reported as not found", "[AssembleList]")
+{
+    ScopedTemporaryFile        file(".json");
+    std::vector<assemble_plate_info_t> plates;
+    CHECK(load_assemble_plate_list(file.string(), plates, max_plates) == AssembleListResult::FileNotFound);
+}