Drop Malformed 3MF Paint Data Instead of Reading Past the Bitstream

Painted facets are decoded from a bitstream a nibble at a time with no bound
check, so a truncated or corrupt paint string in a 3MF (for example split
codes with no children behind them) read past the end and crashed on load and
slice. A one- or two-side split naming side 3 also indexed past the triangle's
vertices.

Every nibble read now goes through a bounds-checked reader. Loading validates
each triangle's tree and drops a malformed one with a warning, so the stored
data, used extruder states and later decoding all agree. deserialize() also
unwinds and clears any triangle whose tree is incomplete or malformed, and
has_facets() stops at a truncated triangle. Valid streams decode unchanged.

src/libslic3r/Format/bbs_3mf.cpp

@@ -1629,7 +1629,7 @@ void PlateData::parse_filament_info(GCodeProcessorResult *result)
         }
         while (it != m_plater_data.end())
         {
-            if (it->first > m_plater_data.size())
+            if (it->first <= 0 || static_cast<size_t>(it->first) > m_plater_data.size())
             {
                 add_error("invalid plate index");
                 return false;
@@ -2312,7 +2312,7 @@ void PlateData::parse_filament_info(GCodeProcessorResult *result)
         }
         while (it != m_plater_data.end())
         {
-            if (it->first > m_plater_data.size())
+            if (it->first <= 0 || static_cast<size_t>(it->first) > m_plater_data.size())
             {
                 add_error("invalid plate index");
                 return false;

src/libslic3r/Model.cpp

@@ -3702,7 +3702,11 @@ void FacetsAnnotation::set_triangle_from_string(int triangle_id, const std::stri
             m_data.bitstream.insert(m_data.bitstream.end(), bool(dec & (1 << i)));
     }
 
-    m_data.update_used_states(bitstream_start_idx);
+    if (!m_data.update_used_states(bitstream_start_idx)) {
+        BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << ": dropping malformed paint data of triangle " << triangle_id;
+        m_data.bitstream.resize(bitstream_start_idx);
+        m_data.triangles_to_split.pop_back();
+    }
 }
 
 bool FacetsAnnotation::equals(const FacetsAnnotation &other) const

src/libslic3r/TriangleSelector.cpp

@@ -1778,6 +1778,13 @@ TriangleSelector::TriangleSplittingData TriangleSelector::serialize() const {
     return out.data;
 }
 
+// A split code keeps the split side (one split) or the kept side (two splits) in its upper two
+// bits, where 3 is not a side. The value is ignored for a three-side split.
+static bool split_code_valid(int code)
+{
+    return (code & 0b11) == 3 || (code >> 2) != 3;
+}
+
 void TriangleSelector::deserialize(const TriangleSplittingData &data,
                                    bool                         needs_reset,
                                    EnforcerBlockerType          max_ebt,
@@ -1812,11 +1819,12 @@ void TriangleSelector::deserialize(const TriangleSplittingData &data,
 
     for (auto [triangle_id, ibit] : data.triangles_to_split) {
         assert(triangle_id < int(m_triangles.size()));
-        assert(ibit < int(data.bitstream.size()));
-        auto next_nibble = [&data, &ibit = ibit]() {
+        // Set when the bitstream runs out or holds an impossible split before this triangle's tree is complete.
+        bool corrupt = false;
+        auto next_nibble = [&data, &ibit = ibit, &corrupt]() {
             int n = 0;
-            for (int i = 0; i < 4; ++ i)
-                n |= data.bitstream[ibit ++] << i;
+            if (! data.read_nibble(ibit, n))
+                corrupt = true;
             return n;
         };
         // Decode a leaf state stored behind the "11" prefix: one nibble of (state-3) for states
@@ -1835,6 +1843,10 @@ void TriangleSelector::deserialize(const TriangleSplittingData &data,
             bool is_split = num_of_children != 0;
             // Only valid if not is_split.
             auto state = is_split ? EnforcerBlockerType::NONE : ((code & 0b1100) == 0b1100 ? decode_leaf_state() : EnforcerBlockerType(code >> 2));
+            if (is_split && ! split_code_valid(code))
+                corrupt = true;
+            if (corrupt)
+                break;
 
             // BBS
             if (state == to_delete_filament)
@@ -1849,7 +1861,7 @@ void TriangleSelector::deserialize(const TriangleSplittingData &data,
             }
 
             // Only valid if is_split.
-            int special_side = code >> 2;
+            int special_side = num_of_split_sides == 3 ? 0 : code >> 2;
 
             // Take care of the first iteration separately, so handling of the others is simpler.
             if (parents.empty()) {
@@ -1904,47 +1916,55 @@ void TriangleSelector::deserialize(const TriangleSplittingData &data,
             if (parents.empty())
                 break;
         }
+
+        if (corrupt) {
+            // Every split above allocated all of its children, so the partial tree unwinds cleanly.
+            BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << ": malformed paint data, dropping paint of triangle " << triangle_id;
+            undivide_triangle(triangle_id);
+            m_triangles[triangle_id].set_state(EnforcerBlockerType::NONE);
+        }
     }
 }
 
-void TriangleSelector::TriangleSplittingData::update_used_states(const size_t bitstream_start_idx) {
-    assert(bitstream_start_idx < this->bitstream.size());
-    assert(!this->bitstream.empty() && this->bitstream.size() != bitstream_start_idx);
-    assert((this->bitstream.size() - bitstream_start_idx) % 4 == 0);
+bool TriangleSelector::TriangleSplittingData::update_used_states(const size_t bitstream_start_idx) {
+    int      ibit   = static_cast<int>(bitstream_start_idx);
+    uint64_t states = 0;
+    do {
+        // Walk one triangle's tree depth-first, counting the nodes still to be read; a split node adds its children.
+        for (int pending_nodes = 1; pending_nodes > 0; --pending_nodes) {
+            int code;
+            if (!this->read_nibble(ibit, code))
+                return false;
 
-    if (this->bitstream.empty() || this->bitstream.size() == bitstream_start_idx)
-        return;
+            if (const int num_of_split_sides = code & 0b11; num_of_split_sides != 0) {
+                if (!split_code_valid(code))
+                    return false;
+                pending_nodes += num_of_split_sides + 1;
+                continue;
+            }
 
-    size_t nibble_idx = bitstream_start_idx;
-
-    auto read_next_nibble = [&data_bitstream = std::as_const(this->bitstream), &nibble_idx]() -> uint8_t {
-        assert(nibble_idx + 3 < data_bitstream.size());
-        uint8_t code = 0;
-        for (size_t bit_idx = 0; bit_idx < 4; ++bit_idx)
-            code |= data_bitstream[nibble_idx++] << bit_idx;
-        return code;
-    };
-
-    while (nibble_idx < this->bitstream.size()) {
-        const uint8_t code = read_next_nibble();
-
-        if (const bool is_split = (code & 0b11) != 0; is_split)
-            continue;
-
-        uint8_t facet_state;
-        if ((code & 0b1100) == 0b1100) {
-            // Leaf behind the "11" prefix: one nibble of (state-3), or 0b1111 + (state-18).
-            const uint8_t nibble = read_next_nibble();
-            facet_state = nibble == 0b1111 ? uint8_t(read_next_nibble() + 18) : uint8_t(nibble + 3);
-        } else {
-            facet_state = code >> 2;
+            int facet_state = code >> 2;
+            if (facet_state == 0b11) {
+                // Leaf behind the "11" prefix: one nibble of (state-3), or 0b1111 + (state-18).
+                int nibble;
+                if (!this->read_nibble(ibit, nibble))
+                    return false;
+                facet_state = nibble + 3;
+                if (nibble == 0b1111) {
+                    if (!this->read_nibble(ibit, nibble))
+                        return false;
+                    facet_state = nibble + 18;
+                }
+            }
+            states |= uint64_t(1) << facet_state;
         }
-        assert(facet_state < this->used_states.size());
-        if (facet_state >= this->used_states.size())
-            continue;
+    } while (static_cast<size_t>(ibit) < this->bitstream.size());
 
-        this->used_states[facet_state] = true;
-    }
+    // The leaf encoding tops out at state 33, so every state fits the 64-bit mask.
+    for (size_t state_idx = 0; state_idx < std::min<size_t>(this->used_states.size(), 64); ++state_idx)
+        if (states & (uint64_t(1) << state_idx))
+            this->used_states[state_idx] = true;
+    return true;
 }
 
 // Lightweight variant of deserialization, which only tests whether a face of test_state exists.
@@ -1956,11 +1976,12 @@ bool TriangleSelector::has_facets(const TriangleSplittingData &data, const Enfor
 
     for (const TriangleBitStreamMapping &triangle_id_and_ibit : data.triangles_to_split) {
         int ibit = triangle_id_and_ibit.bitstream_start_idx;
-        assert(ibit < int(data.bitstream.size()));
-        auto next_nibble = [&data, &ibit = ibit]() {
+        // Stop reading a triangle whose stream is truncated.
+        bool truncated = false;
+        auto next_nibble = [&data, &ibit = ibit, &truncated]() {
             int n = 0;
-            for (int i = 0; i < 4; ++ i)
-                n |= data.bitstream[ibit ++] << i;
+            if (! data.read_nibble(ibit, n))
+                truncated = true;
             return n;
         };
         // < 0 -> negative of a number of children
@@ -1978,6 +1999,8 @@ bool TriangleSelector::has_facets(const TriangleSplittingData &data, const Enfor
         };
 
         int state = num_children_or_state();
+        if (truncated)
+            continue;
         if (state < 0) {
             // Root is split.
             parents_children.clear();
@@ -1985,6 +2008,8 @@ bool TriangleSelector::has_facets(const TriangleSplittingData &data, const Enfor
             do {
                 if (-- parents_children.back() >= 0) {
                     int state = num_children_or_state();
+                    if (truncated)
+                        break;
                     if (state < 0)
                         // Child is split.
                         parents_children.emplace_back(- state);

src/libslic3r/TriangleSelector.hpp

@@ -297,8 +297,20 @@ public:
             std::fill(used_states.begin(), used_states.end(), false);
         }
 
-        // Update used states based on the bitstream. It just iterated over the bitstream from the bitstream_start_idx till the end.
-        void update_used_states(size_t bitstream_start_idx);
+        // Update used states from the triangle trees stored between bitstream_start_idx and the end of the bitstream.
+        // Returns false and leaves used states untouched if a tree is truncated or malformed.
+        bool update_used_states(size_t bitstream_start_idx);
+
+        // Read the 4-bit code at bit index ibit (LSB first) and advance ibit past it.
+        // Returns false without advancing when fewer than 4 bits remain.
+        bool read_nibble(int &ibit, int &nibble) const {
+            if (ibit < 0 || static_cast<size_t>(ibit) + 4 > bitstream.size())
+                return false;
+            nibble = 0;
+            for (int i = 0; i < 4; ++i)
+                nibble |= static_cast<int>(bitstream[ibit++]) << i;
+            return true;
+        }
 
     private:
         friend class cereal::access;

src/slic3r/GUI/AmsMappingPopup.cpp

@@ -819,7 +819,7 @@ AmsMapingPopup::AmsMapingPopup(wxWindow *parent, bool use_in_sync_dialog) :
 
      m_scrolled_window = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxVSCROLL | wxHSCROLL);
      m_scrolled_window->SetBackgroundColour(*wxWHITE);
-     m_scrolled_window->SetScrollRate(0, FromDIP(10));
+     m_scrolled_window->SetScrollRate(0, FromDIP(20));
 
      wxBoxSizer *title_sizer_h= new wxBoxSizer(wxHORIZONTAL);
      wxBoxSizer *title_sizer_v = new wxBoxSizer(wxVERTICAL);
@@ -1000,13 +1000,13 @@ AmsMapingPopup::AmsMapingPopup(wxWindow *parent, bool use_in_sync_dialog) :
                   show_pos.x = screen_size.GetLeft();
                   m_scrolled_window->SetMaxSize(wxSize(screen_size.GetWidth(), popup_height));
                   m_scrolled_window->SetMinSize(wxSize(screen_size.GetWidth(), popup_height));
-                  m_scrolled_window->SetScrollRate(FromDIP(10), FromDIP(10));
+                  m_scrolled_window->SetScrollRate(FromDIP(10), FromDIP(20));
               }
               else
               {
                   m_scrolled_window->SetMaxSize(wxSize(popup_width, popup_height));
                   m_scrolled_window->SetMinSize(wxSize(popup_width, popup_height));
-                  m_scrolled_window->SetScrollRate(0, FromDIP(10));
+                  m_scrolled_window->SetScrollRate(0, FromDIP(20));
               }
 
               //Vertical Direction Processing
@@ -2117,7 +2117,7 @@ void AmsReplaceMaterialDialog::create()
     identical_filament->SetForegroundColour(StateColor::darkModeColorFor(wxColour("#009688"))); // Orca: accent teal (not brand green)
 
     m_scrollview_groups = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxHSCROLL | wxVSCROLL);
-    m_scrollview_groups->SetScrollRate(5, 5);
+    m_scrollview_groups->SetScrollRate(5, FromDIP(20));
     //m_scrollview_groups->SetMinSize(wxSize(400, 400));
     //m_scrollview_groups->SetMaxSize(wxSize(400, 400));
     m_scrollview_sizer = new wxBoxSizer(wxVERTICAL);

src/slic3r/GUI/Auxiliary.cpp

@@ -606,7 +606,7 @@ AuFolderPanel::AuFolderPanel(wxWindow *parent, AuxiliaryFolderType type, wxWindo
     wxBoxSizer *sizer_main = new wxBoxSizer(wxVERTICAL);
 
     m_scrolledWindow = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxHSCROLL | wxVSCROLL);
-    m_scrolledWindow->SetScrollRate(5, 5);
+    m_scrolledWindow->SetScrollRate(5, FromDIP(20));
     wxBoxSizer *sizer_body = new wxBoxSizer(wxVERTICAL);
     wxBoxSizer *sizer_top  = new wxBoxSizer(wxHORIZONTAL);
 

src/slic3r/GUI/BindDialog.cpp

@@ -558,7 +558,7 @@ PingCodeBindDialog::~PingCodeBindDialog() {
      //show bind failed info
      m_sw_bind_failed_info = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, wxSize(FromDIP(450), FromDIP(300)), wxVSCROLL);
      m_sw_bind_failed_info->SetBackgroundColour(*wxWHITE);
-     m_sw_bind_failed_info->SetScrollRate(5, 5);
+     m_sw_bind_failed_info->SetScrollRate(5, FromDIP(20));
      m_sw_bind_failed_info->SetMinSize(wxSize(FromDIP(450), FromDIP(90)));
      m_sw_bind_failed_info->SetMaxSize(wxSize(FromDIP(450), FromDIP(90)));
 

src/slic3r/GUI/CAD/DesignPanel.cpp

@@ -3521,7 +3521,7 @@ DesignPanel::DesignPanel(wxWindow* parent)
     cards->Show(m_box_mate,        false, true);
 
     m_form->FitInside();
-    m_form->SetScrollRate(0, 10);   // vertical only, like Prepare's sidebar: never scroll labels out
+    m_form->SetScrollRate(0, FromDIP(20));   // vertical only, like Prepare's sidebar: never scroll labels out
     m_form->SetMinSize(wxSize(264, -1));
 
     // Right column: a small view toolbar over the live 3D viewport that mirrors

src/slic3r/GUI/CaliHistoryDialog.cpp

@@ -115,7 +115,7 @@ HistoryWindow::HistoryWindow(wxWindow* parent, const std::vector<PACalibResult>&
     auto main_sizer = new wxBoxSizer(wxVERTICAL);
 
     auto scroll_window = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxHSCROLL | wxVSCROLL);
-    scroll_window->SetScrollRate(5, 5);
+    scroll_window->SetScrollRate(5, FromDIP(20));
     scroll_window->SetBackgroundColour(*wxWHITE);
     scroll_window->SetMinSize(HISTORY_WINDOW_SIZE);
     scroll_window->SetSize(HISTORY_WINDOW_SIZE);

src/slic3r/GUI/CalibrationPanel.cpp

@@ -207,7 +207,7 @@ SelectMObjectPopup::SelectMObjectPopup(wxWindow* parent)
     m_scrolledWindow = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, SELECT_MACHINE_LIST_SIZE, wxHSCROLL | wxVSCROLL);
     m_scrolledWindow->SetBackgroundColour(*wxWHITE);
     m_scrolledWindow->SetMinSize(SELECT_MACHINE_LIST_SIZE);
-    m_scrolledWindow->SetScrollRate(0, 5);
+    m_scrolledWindow->SetScrollRate(0, SELECT_MACHINE_ITEM_SIZE.y);
     auto m_sizxer_scrolledWindow = new wxBoxSizer(wxVERTICAL);
     m_scrolledWindow->SetSizer(m_sizxer_scrolledWindow);
     m_scrolledWindow->Layout();

src/slic3r/GUI/CalibrationWizard.cpp

@@ -81,7 +81,7 @@ CalibrationWizard::CalibrationWizard(wxWindow* parent, CalibMode mode, wxWindowI
     wxBoxSizer* main_sizer = new wxBoxSizer(wxVERTICAL);
 
     m_scrolledWindow = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxHSCROLL | wxVSCROLL);
-    m_scrolledWindow->SetScrollRate(5, 5);
+    m_scrolledWindow->SetScrollRate(5, FromDIP(20));
     m_scrolledWindow->SetBackgroundColour(*wxWHITE);
 
     wxBoxSizer* padding_sizer = new wxBoxSizer(wxHORIZONTAL);

src/slic3r/GUI/CalibrationWizardPage.cpp

@@ -834,7 +834,7 @@ void CaliPageSendingPanel::create(wxWindow* parent)
 
     m_sw_print_failed_info = new wxScrolledWindow(parent, wxID_ANY, wxDefaultPosition, wxSize(FromDIP(380), FromDIP(125)), wxVSCROLL);
     m_sw_print_failed_info->SetBackgroundColour(*wxWHITE);
-    m_sw_print_failed_info->SetScrollRate(0, 5);
+    m_sw_print_failed_info->SetScrollRate(0, FromDIP(20));
     m_sw_print_failed_info->SetMinSize(wxSize(FromDIP(380), FromDIP(125)));
     m_sw_print_failed_info->SetMaxSize(wxSize(FromDIP(380), FromDIP(125)));
 

src/slic3r/GUI/ConfigWizard.cpp

@@ -2710,7 +2710,7 @@ ConfigWizard::ConfigWizard(wxWindow *parent)
     SetSizerAndFit(vsizer);
 
     // We can now enable scrolling on hscroll
-    p->hscroll->SetScrollRate(30, 30);
+    p->hscroll->SetScrollRate(30, FromDIP(20));
 
     on_window_geometry(this, [this]() {
         p->init_dialog_size();

src/slic3r/GUI/CreatePresetsDialog.cpp

@@ -699,7 +699,7 @@ CreateFilamentPresetDialog::CreateFilamentPresetDialog(wxWindow *parent)
     m_scrolled_preset_panel = new wxScrolledWindow(this, wxID_ANY);
     m_scrolled_preset_panel->SetMaxSize(wxSize(-1, FromDIP(350)));
     m_scrolled_preset_panel->SetBackgroundColour(*wxWHITE);
-    m_scrolled_preset_panel->SetScrollRate(5, 5);
+    m_scrolled_preset_panel->SetScrollRate(5, FromDIP(20));
     m_scrolled_sizer = new wxBoxSizer(wxVERTICAL);
     m_scrolled_sizer->Add(create_item(FilamentOptionType::PRESET_FOR_PRINTER), 0, wxEXPAND | wxLEFT | wxRIGHT | wxBOTTOM, FromDIP(5));
     m_scrolled_sizer->Add(0, 0, 0, wxTOP, FromDIP(5));
@@ -1593,7 +1593,7 @@ CreatePrinterPresetDialog::CreatePrinterPresetDialog(wxWindow *parent)
 
     m_page1 = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, wxDefaultSize);
     m_page1->SetBackgroundColour(*wxWHITE);
-    m_page1->SetScrollRate(5, 5);
+    m_page1->SetScrollRate(5, FromDIP(20));
     m_page2 = new wxPanel(this, wxID_ANY, wxDefaultPosition, wxDefaultSize);    m_page2->SetBackgroundColour(*wxWHITE);
 
     create_printer_page1(m_page1);
@@ -2652,7 +2652,7 @@ wxBoxSizer *CreatePrinterPresetDialog::create_presets_template_item(wxWindow *pa
     wxBoxSizer *vertical_sizer = new wxBoxSizer(wxVERTICAL);
 
     m_scrolled_preset_window = new wxScrolledWindow(parent);
-    m_scrolled_preset_window->SetScrollRate(5, 5);
+    m_scrolled_preset_window->SetScrollRate(5, FromDIP(20));
     m_scrolled_preset_window->SetBackgroundColour(*wxWHITE);
     //m_scrolled_preset_window->SetMinSize(wxSize(FromDIP(1500), FromDIP(-1)));
     m_scrolled_preset_window->SetMaxSize(wxSize(FromDIP(1500), FromDIP(-1)));
@@ -4297,7 +4297,7 @@ wxBoxSizer *ExportConfigsDialog::create_select_printer(wxWindow *parent)
     optionSizer->SetMinSize(OPTION_SIZE);
     horizontal_sizer->Add(optionSizer, 0, wxEXPAND | wxALL, FromDIP(10));
     m_scrolled_preset_window = new wxScrolledWindow(parent);
-    m_scrolled_preset_window->SetScrollRate(5, 5);
+    m_scrolled_preset_window->SetScrollRate(5, FromDIP(20));
     m_scrolled_preset_window->SetBackgroundColour(*wxWHITE);
     m_scrolled_preset_window->SetMaxSize(wxSize(FromDIP(660), FromDIP(400)));
     m_scrolled_preset_window->SetSize(wxSize(FromDIP(660), FromDIP(400)));
@@ -4736,7 +4736,7 @@ wxBoxSizer *EditFilamentPresetDialog::create_preset_tree_sizer()
 {
     wxBoxSizer *filament_preset_tree_sizer = new wxBoxSizer(wxHORIZONTAL);
     m_preset_tree_window = new wxScrolledWindow(this);
-    m_preset_tree_window->SetScrollRate(5, 5);
+    m_preset_tree_window->SetScrollRate(5, FromDIP(20));
     m_preset_tree_window->SetBackgroundColour(PRINTER_LIST_COLOUR);
     m_preset_tree_window->SetMinSize(wxSize(-1, FromDIP(400)));
     m_preset_tree_window->SetMaxSize(wxSize(-1, FromDIP(300)));

src/slic3r/GUI/DeviceErrorDialog.cpp

@@ -39,7 +39,7 @@ DeviceErrorDialog::DeviceErrorDialog(MachineObject* obj, wxWindow* parent, wxWin
     m_line_top->SetBackgroundColour(wxColour(166, 169, 170));
 
     m_scroll_area = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxVSCROLL);
-    m_scroll_area->SetScrollRate(0, 5);
+    m_scroll_area->SetScrollRate(0, FromDIP(20));
     m_scroll_area->SetBackgroundColour(*wxWHITE);
     m_scroll_area->SetMinSize(wxSize(FromDIP(320), FromDIP(250)));
 

src/slic3r/GUI/GLModel.cpp

@@ -456,8 +456,9 @@ void GLModel::init_from(const indexed_triangle_set& its)
     data.reserve_vertices(3 * its.indices.size());
     data.reserve_indices(3 * its.indices.size());
 
-    // Read user preference: smooth normals enabled
-    const bool smooth_normals_enabled = wxGetApp().app_config != nullptr && wxGetApp().app_config->get_bool(SETTING_OPENGL_PHONG_SMOOTH_NORMALS);
+    // CLI thumbnail generation can initialize models without a wx application.
+    const bool smooth_normals_enabled = wxApp::GetInstance() != nullptr && wxGetApp().app_config != nullptr &&
+                                        wxGetApp().app_config->get_bool(SETTING_OPENGL_PHONG_SMOOTH_NORMALS);
 
     if (smooth_normals_enabled) {
         // Use per-corner smooth normals (via IGL)

src/slic3r/GUI/GUI_ObjectTable.cpp

@@ -2764,12 +2764,12 @@ ObjectTablePanel::ObjectTablePanel( wxWindow* parent, wxWindowID id, const wxPoi
     //m_object_grid->AssignTable(m_object_grid_table);
 
     m_side_window = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, wxSize(FromDIP(440),FromDIP(480)), wxVSCROLL);
-    m_side_window->SetScrollRate( 0, 5 );
+    m_side_window->SetScrollRate(0, FromDIP(20));
     m_page_sizer = new wxBoxSizer(wxVERTICAL);
     //m_page_top_sizer = new wxBoxSizer(wxHORIZONTAL);
     m_side_window->SetBackgroundColour(wxColour(0xff, 0xff, 0xff));
     m_side_window->SetSizer(m_page_sizer);
-    m_side_window->SetScrollbars(1, 20, 1, 2);
+    m_side_window->SetScrollbars(1, FromDIP(20), 1, 2);
     //m_side_window->ShowScrollbars(wxSHOW_SB_NEVER, wxSHOW_SB_NEVER);
 
     //m_side_window->EnableScrolling(false, true);

src/slic3r/GUI/HMSPanel.cpp

@@ -171,7 +171,7 @@ HMSPanel::HMSPanel(wxWindow *parent, wxWindowID id, const wxPoint &pos, const wx
 
     m_scrolledWindow = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxVSCROLL);
     m_scrolledWindow->SetBackgroundColour(*wxWHITE);
-    m_scrolledWindow->SetScrollRate(5, 5);
+    m_scrolledWindow->SetScrollRate(5, FromDIP(20));
 
     m_top_sizer = new wxBoxSizer(wxVERTICAL);
 

src/slic3r/GUI/KBShortcutsDialog.cpp

@@ -211,7 +211,7 @@ wxPanel* KBShortcutsDialog::create_page(wxWindow* parent, const Page& page)
     wxGetApp().UpdateDarkUI(scrollable_panel);
     const wxColour page_colour = StateColor::darkModeColorFor(*wxWHITE);
     scrollable_panel->SetBackgroundColour(page_colour);
-    scrollable_panel->SetScrollRate(0, 20);
+    scrollable_panel->SetScrollRate(0, FromDIP(20));
     const int page_width = FromDIP(PAGE_WIDTH);
     scrollable_panel->SetInitialSize(wxSize(page_width, FromDIP(450)));
 

src/slic3r/GUI/MixedFilamentDialog.cpp

@@ -1125,7 +1125,7 @@ wxBoxSizer* MixedFilamentDialog::create_recommendation_grid()
     outer->Add(title_sizer, 0, wxEXPAND | wxBOTTOM, FromDIP(4));
 
     m_recommendation_scroll = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, wxSize(-1, FromDIP(116)));
-    m_recommendation_scroll->SetScrollRate(0, 5);
+    m_recommendation_scroll->SetScrollRate(0, FromDIP(20));
     m_recommendation_scroll->SetBackgroundColour(StateColor::darkModeColorFor(wxColour("#F8F8F8")));
 
     m_recommendation_grid = new wxWrapSizer(wxHORIZONTAL, wxREMOVE_LEADING_SPACES);

src/slic3r/GUI/MsgDialog.cpp

@@ -194,9 +194,10 @@ Button* MsgDialog::add_button(wxWindowID btn_id, bool set_focus /*= false*/, con
     bd->button = btn;
     //bd->type   = type;
 
-    mb->id        = wxString::Format("%d", m_buttons.size());
+    // m_buttons.size() is a size_t, which does not match the %d conversion
+    mb->id        = wxString(std::to_string(m_buttons.size()));
     mb->buttondata = bd;
-    m_buttons[ wxString::Format("%d", m_buttons.size())] = mb;
+    m_buttons[ wxString(std::to_string(m_buttons.size()))] = mb;
     return btn;
 };
 
@@ -398,7 +399,7 @@ static void add_msg_content(wxWindow   *parent,
             }
             wxScrolledWindow *scrolledWindow = new wxScrolledWindow(parent, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxVSCROLL);
             scrolledWindow->SetBackgroundColour(*wxWHITE);
-            scrolledWindow->SetScrollRate(0, 20);
+            scrolledWindow->SetScrollRate(0, scrolledWindow->FromDIP(20));
             scrolledWindow->EnableScrolling(false, true);
             wxBoxSizer *sizer_scrolled = new wxBoxSizer(wxHORIZONTAL);
             Label *wrapped_text = new Label(scrolledWindow, font, msg, LB_AUTO_WRAP, wxSize(info_width, -1));

src/slic3r/GUI/MultiMachineManagerPage.cpp

@@ -398,7 +398,7 @@ MultiMachineManagerPage::MultiMachineManagerPage(wxWindow* parent)
 
     m_machine_list = new wxScrolledWindow(m_main_panel, wxID_ANY, wxDefaultPosition, wxDefaultSize);
     m_machine_list->SetBackgroundColour(*wxWHITE);
-    m_machine_list->SetScrollRate(0, 5);
+    m_machine_list->SetScrollRate(0, FromDIP(DEVICE_ITEM_MAX_HEIGHT));
     m_machine_list->SetMinSize(wxSize(FromDIP(DEVICE_ITEM_MAX_WIDTH), 10 * FromDIP(DEVICE_ITEM_MAX_HEIGHT)));
     m_machine_list->SetMaxSize(wxSize(FromDIP(DEVICE_ITEM_MAX_WIDTH), 10 * FromDIP(DEVICE_ITEM_MAX_HEIGHT)));
 

src/slic3r/GUI/MultiMachinePage.cpp

@@ -323,7 +323,7 @@ MultiMachinePickPage::MultiMachinePickPage(Plater* plater /*= nullptr*/)
     scroll_macine_list->SetMinSize(wxSize(FromDIP(400), FromDIP(10 * 30)));
     scroll_macine_list->SetMaxSize(wxSize(FromDIP(400), FromDIP(10 * 30)));
     scroll_macine_list->SetBackgroundColour(*wxWHITE);
-    scroll_macine_list->SetScrollRate(0, 5);
+    scroll_macine_list->SetScrollRate(0, FromDIP(DEVICE_ITEM_MAX_HEIGHT));
 
     sizer_machine_list = new wxBoxSizer(wxVERTICAL);
     scroll_macine_list->SetSizer(sizer_machine_list);

src/slic3r/GUI/MultiTaskManagerPage.cpp

@@ -675,7 +675,7 @@ LocalTaskManagerPage::LocalTaskManagerPage(wxWindow* parent)
 
     m_task_list = new wxScrolledWindow(m_main_panel, wxID_ANY, wxDefaultPosition, wxDefaultSize);
     m_task_list->SetBackgroundColour(*wxWHITE);
-    m_task_list->SetScrollRate(0, 5);
+    m_task_list->SetScrollRate(0, FromDIP(DEVICE_ITEM_MAX_HEIGHT));
     m_task_list->SetMinSize(wxSize(FromDIP(CLOUD_TASK_ITEM_MAX_WIDTH), FromDIP(DEVICE_ITEM_MAX_HEIGHT)));
     m_task_list->SetMaxSize(wxSize(FromDIP(CLOUD_TASK_ITEM_MAX_WIDTH), 10 * FromDIP(DEVICE_ITEM_MAX_HEIGHT)));
 
@@ -1056,7 +1056,7 @@ CloudTaskManagerPage::CloudTaskManagerPage(wxWindow* parent)
 
     m_task_list = new wxScrolledWindow(m_main_panel, wxID_ANY, wxDefaultPosition, wxDefaultSize);
     m_task_list->SetBackgroundColour(*wxWHITE);
-    m_task_list->SetScrollRate(0, 5);
+    m_task_list->SetScrollRate(0, FromDIP(DEVICE_ITEM_MAX_HEIGHT));
     m_task_list->SetMinSize(wxSize(FromDIP(CLOUD_TASK_ITEM_MAX_WIDTH), FromDIP(DEVICE_ITEM_MAX_HEIGHT)));
     m_task_list->SetMaxSize(wxSize(FromDIP(CLOUD_TASK_ITEM_MAX_WIDTH), 10 * FromDIP(DEVICE_ITEM_MAX_HEIGHT)));
 

src/slic3r/GUI/ObjColorDialog.cpp

@@ -355,7 +355,7 @@ ObjColorPanel::ObjColorPanel(wxWindow *parent, Slic3r::ObjDialogInOut &in_out, c
         //new color table
         m_scrolledWindow = new wxScrolledWindow(m_page_simple, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxVSCROLL);
         m_scrolledWindow->SetBackgroundColour(*wxWHITE);
-        m_scrolledWindow->SetScrollRate(0, 20);
+        m_scrolledWindow->SetScrollRate(0, FromDIP(20));
         m_scrolledWindow->EnableScrolling(false, true);
         m_scrolledWindow->ShowScrollbars(wxScrollbarVisibility::wxSHOW_SB_NEVER, wxScrollbarVisibility::wxSHOW_SB_DEFAULT);
         draw_new_table();

src/slic3r/GUI/ParamsPanel.cpp

@@ -391,7 +391,7 @@ ParamsPanel::ParamsPanel( wxWindow* parent, wxWindowID id, const wxPoint& pos, c
     m_page_sizer = new wxBoxSizer(wxVERTICAL);
 
     m_page_view->SetSizer(m_page_sizer);
-    m_page_view->SetScrollbars(1, 20, 1, 2);
+    m_page_view->SetScrollbars(1, FromDIP(20), 1, 2);
     //m_page_view->SetScrollRate( 5, 5 );
 
     if (m_mode_region)

src/slic3r/GUI/PartSkipDialog.cpp

@@ -148,7 +148,7 @@ PartSkipDialog::PartSkipDialog(wxWindow *parent) : DPIDialog(parent, wxID_ANY, _
     m_line->SetBackgroundColour(wxColor(238, 238, 238));
 
     m_list_view = new wxScrolledWindow(m_book_third_panel, wxID_ANY, wxDefaultPosition, wxSize(267, -1), wxHSCROLL | wxVSCROLL);
-    m_list_view->SetScrollRate(5, 5);
+    m_list_view->SetScrollRate(5, FromDIP(30));
     m_list_view->SetMinSize(wxSize(FromDIP(267), FromDIP(378)));
     m_list_view->SetMaxSize(wxSize(FromDIP(267), FromDIP(378)));
     m_list_view->SetBackgroundColour(*wxWHITE);

src/slic3r/GUI/Plater.cpp

@@ -3049,8 +3049,7 @@ Sidebar::Sidebar(Plater *parent)
 
     // add filament content
     p->m_panel_filament_content = new wxScrolledWindow(p->m_filament_area_wrapper, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxTAB_TRAVERSAL );
-    p->m_panel_filament_content->SetScrollbars(0, 100, 1, 2);
-    p->m_panel_filament_content->SetScrollRate(0, 5);
+    p->m_panel_filament_content->SetScrollRate(0, FromDIP(20));
     //p->m_panel_filament_content->SetMaxSize(wxSize{-1, FromDIP(174)});
     p->m_panel_filament_content->SetBackgroundColour(wxColour(255, 255, 255));
 
@@ -3142,8 +3141,7 @@ Sidebar::Sidebar(Plater *parent)
     // 3) Mixed filament rows, in their own scroll area so a long mixed list does not
     //    push the physical filament list off screen.
     p->m_mixed_scroll_area = new wxScrolledWindow(p->m_filament_area_wrapper, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxTAB_TRAVERSAL);
-    p->m_mixed_scroll_area->SetScrollbars(0, 100, 1, 2);
-    p->m_mixed_scroll_area->SetScrollRate(0, 5);
+    p->m_mixed_scroll_area->SetScrollRate(0, FromDIP(20));
     p->m_mixed_scroll_area->SetBackgroundColour(StateColor::darkModeColorFor(*wxWHITE));
     {
         auto* mix_scroll_sizer = new wxBoxSizer(wxVERTICAL);

src/slic3r/GUI/Preferences.cpp

@@ -1475,7 +1475,7 @@ void PreferencesDialog::create()
     app_config = get_app_config();
 
     m_parent = new MyscrolledWindow(this, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxVSCROLL);
-    m_parent->SetScrollRate(5, 5);
+    m_parent->SetScrollRate(0, FromDIP(20));
     m_parent->SetBackgroundColour(*wxWHITE);
 
     m_sizer_body = new wxBoxSizer(wxVERTICAL);

src/slic3r/GUI/PrintOptionsDialog.cpp

@@ -32,7 +32,7 @@ PrintOptionsDialog::PrintOptionsDialog(wxWindow* parent)
 
 
     m_scrollwindow = new wxScrolledWindow(this, wxID_ANY);
-    m_scrollwindow->SetScrollRate(0, FromDIP(10));
+    m_scrollwindow->SetScrollRate(0, FromDIP(20));
     m_scrollwindow->SetBackgroundColour(*wxWHITE);
     m_scrollwindow->SetMinSize(wxSize(FromDIP(480), wxDefaultCoord));
     m_scrollwindow->SetMaxSize(wxSize(FromDIP(480), wxDefaultCoord));

src/slic3r/GUI/PublishSettingsDialog.cpp

@@ -1225,7 +1225,7 @@ size_t PublishSettingsDialog::category_index_for(
     }
 
     category.scroll = new wxScrolledWindow(category.page, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxVSCROLL);
-    category.scroll->SetScrollRate(0, 10);
+    category.scroll->SetScrollRate(0, FromDIP(20));
     category.scroll->SetBackgroundColour(GetBackgroundColour());
     category.list_sizer = new wxBoxSizer(wxVERTICAL);
     category.scroll->SetSizer(category.list_sizer);

src/slic3r/GUI/ReleaseNote.cpp

@@ -76,7 +76,7 @@ ReleaseNoteDialog::ReleaseNoteDialog(Plater *plater /*= nullptr*/)
     m_sizer_right->Add(0, 0, 1, wxTOP, FromDIP(15));
 
     m_vebview_release_note = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, wxSize(FromDIP(560), FromDIP(430)), wxVSCROLL);
-    m_vebview_release_note->SetScrollRate(5, 5);
+    m_vebview_release_note->SetScrollRate(5, FromDIP(20));
     m_vebview_release_note->SetBackgroundColour(wxColour(0xF8, 0xF8, 0xF8));
     m_vebview_release_note->SetMaxSize(wxSize(FromDIP(560), FromDIP(430)));
 
@@ -142,7 +142,7 @@ UpdatePluginDialog::UpdatePluginDialog(wxWindow* parent /*= nullptr*/)
     operation_tips->SetMaxSize(wxSize(FromDIP(260), -1));
 
     m_vebview_release_note = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxVSCROLL);
-    m_vebview_release_note->SetScrollRate(5, 5);
+    m_vebview_release_note->SetScrollRate(5, FromDIP(20));
     m_vebview_release_note->SetBackgroundColour(wxColour(0xF8, 0xF8, 0xF8));
     m_vebview_release_note->SetMinSize(wxSize(FromDIP(260), FromDIP(150)));
     m_vebview_release_note->SetMaxSize(wxSize(FromDIP(260), FromDIP(150)));
@@ -277,7 +277,7 @@ UpdateVersionDialog::UpdateVersionDialog(wxWindow *parent)
     m_simplebook_release_note->SetBackgroundColour(wxColour(0xF8, 0xF8, 0xF8));
 
     m_scrollwindows_release_note = new wxScrolledWindow(m_simplebook_release_note, wxID_ANY, wxDefaultPosition, wxSize(FromDIP(560), FromDIP(430)), wxVSCROLL);
-    m_scrollwindows_release_note->SetScrollRate(5, 5);
+    m_scrollwindows_release_note->SetScrollRate(5, FromDIP(20));
     m_scrollwindows_release_note->SetBackgroundColour(wxColour(0xF8, 0xF8, 0xF8));
 
     //webview
@@ -538,7 +538,7 @@ SecondaryCheckDialog::SecondaryCheckDialog(wxWindow* parent, wxWindowID id, cons
     m_sizer_right->Add(0, 0, 1, wxTOP, FromDIP(15));
 
     m_vebview_release_note = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxVSCROLL);
-    m_vebview_release_note->SetScrollRate(0, 5);
+    m_vebview_release_note->SetScrollRate(0, FromDIP(20));
     m_vebview_release_note->SetBackgroundColour(*wxWHITE);
     m_vebview_release_note->SetMinSize(wxSize(FromDIP(400), FromDIP(380)));
     m_sizer_right->Add(m_vebview_release_note, 0, wxEXPAND | wxRIGHT | wxLEFT, FromDIP(15));
@@ -823,7 +823,7 @@ PrintErrorDialog::PrintErrorDialog(wxWindow* parent, wxWindowID id, const wxStri
     m_sizer_right->Add(0, 0, 1, wxTOP, FromDIP(5));
 
     m_vebview_release_note = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxVSCROLL);
-    m_vebview_release_note->SetScrollRate(0, 5);
+    m_vebview_release_note->SetScrollRate(0, FromDIP(20));
     m_vebview_release_note->SetBackgroundColour(*wxWHITE);
     m_vebview_release_note->SetMinSize(wxSize(FromDIP(320), FromDIP(250)));
     m_sizer_right->Add(m_vebview_release_note, 0, wxEXPAND | wxRIGHT | wxLEFT, FromDIP(15));
@@ -1122,7 +1122,7 @@ ConfirmBeforeSendDialog::ConfirmBeforeSendDialog(wxWindow* parent, wxWindowID id
     m_sizer_right->Add(0, 0, 1, wxTOP, FromDIP(15));
 
     m_vebview_release_note = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxVSCROLL);
-    m_vebview_release_note->SetScrollRate(0, 5);
+    m_vebview_release_note->SetScrollRate(0, FromDIP(20));
     m_vebview_release_note->SetBackgroundColour(*wxWHITE);
     m_vebview_release_note->SetMinSize(wxSize(FromDIP(400), FromDIP(380)));
     m_sizer_right->Add(m_vebview_release_note, 0, wxEXPAND | wxRIGHT | wxLEFT, FromDIP(15));

src/slic3r/GUI/SafetyOptionsDialog.cpp

@@ -31,7 +31,7 @@ SafetyOptionsDialog::SafetyOptionsDialog(wxWindow* parent)
     SetSize(FromDIP(480),FromDIP(320));
 
     m_scrollwindow = new wxScrolledWindow(this, wxID_ANY);
-    m_scrollwindow->SetScrollRate(0, FromDIP(10));
+    m_scrollwindow->SetScrollRate(0, FromDIP(20));
     m_scrollwindow->SetBackgroundColour(*wxWHITE);
     m_scrollwindow->SetMinSize(wxSize(FromDIP(480), wxDefaultCoord));
     m_scrollwindow->SetMaxSize(wxSize(FromDIP(480), wxDefaultCoord));
@@ -272,4 +272,4 @@ void SafetyOptionsDialog::show_idel_heating_toast(const wxString &text)
     m_idel_heating_toast_timer.StartOnce(3000);
 }
 
-}} // namespace Slic3r::GUI
+}} // namespace Slic3r::GUI

src/slic3r/GUI/SelectMachine.cpp

@@ -148,7 +148,7 @@ SelectMachineDialog::SelectMachineDialog(Plater *plater)
 
     wxBoxSizer* m_scroll_sizer = new wxBoxSizer(wxVERTICAL);
     m_scroll_area              = new wxScrolledWindow(this);
-    m_scroll_area->SetScrollRate(0, 20);
+    m_scroll_area->SetScrollRate(0, FromDIP(20));
     m_scroll_area->SetBackgroundColour(m_colour_def_color);
     m_scroll_area->SetMinSize(wxSize(FromDIP(700), FromDIP(600)));
     m_scroll_area->SetMaxSize(wxSize(FromDIP(700), FromDIP(600)));
@@ -707,7 +707,7 @@ SelectMachineDialog::SelectMachineDialog(Plater *plater)
     //show bind failed info
     m_sw_print_failed_info = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, wxSize(SELECT_MACHINE_DIALOG_SIMBOOK_SIZE2.x, FromDIP(125)), wxVSCROLL);
     m_sw_print_failed_info->SetBackgroundColour(*wxWHITE);
-    m_sw_print_failed_info->SetScrollRate(0, 5);
+    m_sw_print_failed_info->SetScrollRate(0, FromDIP(20));
     m_sw_print_failed_info->SetMinSize(wxSize(SELECT_MACHINE_DIALOG_SIMBOOK_SIZE2.x, FromDIP(125)));
     m_sw_print_failed_info->SetMaxSize(wxSize(SELECT_MACHINE_DIALOG_SIMBOOK_SIZE2.x, FromDIP(125)));
 

src/slic3r/GUI/SelectMachinePop.cpp

@@ -327,7 +327,7 @@ SelectMachinePopup::SelectMachinePopup(wxWindow *parent)
     m_scrolledWindow = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, SELECT_MACHINE_LIST_SIZE, wxHSCROLL | wxVSCROLL);
     m_scrolledWindow->SetBackgroundColour(*wxWHITE);
     m_scrolledWindow->SetMinSize(SELECT_MACHINE_LIST_SIZE);
-    m_scrolledWindow->SetScrollRate(0, 5);
+    m_scrolledWindow->SetScrollRate(0, SELECT_MACHINE_ITEM_SIZE.y);
     auto m_sizxer_scrolledWindow = new wxBoxSizer(wxVERTICAL);
     m_scrolledWindow->SetSizer(m_sizxer_scrolledWindow);
     m_scrolledWindow->Layout();

src/slic3r/GUI/SendMultiMachinePage.cpp

@@ -278,7 +278,7 @@ SendMultiMachinePage::SendMultiMachinePage(Plater* plater)
 
     m_main_scroll = new ScrolledWindow(this, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxVSCROLL);
     m_main_scroll->SetBackgroundColour(*wxWHITE);
-    m_main_scroll->SetScrollRate(5, 5);
+    m_main_scroll->SetScrollRate(5, FromDIP(20));
 
     m_sizer_body = new wxBoxSizer(wxVERTICAL);
     m_main_page = create_page();
@@ -1353,7 +1353,7 @@ wxPanel* SendMultiMachinePage::create_page()
 
     scroll_macine_list = new wxScrolledWindow(main_page, wxID_ANY, wxDefaultPosition, wxSize(FromDIP(800), FromDIP(300)), wxHSCROLL | wxVSCROLL);
     scroll_macine_list->SetBackgroundColour(*wxWHITE);
-    scroll_macine_list->SetScrollRate(5, 5);
+    scroll_macine_list->SetScrollRate(5, FromDIP(SEND_ITEM_MAX_HEIGHT));
     scroll_macine_list->SetMinSize(wxSize(FromDIP(DEVICE_ITEM_MAX_WIDTH), 10 * FromDIP(SEND_ITEM_MAX_HEIGHT)));
     scroll_macine_list->SetMaxSize(wxSize(FromDIP(DEVICE_ITEM_MAX_WIDTH), 10 * FromDIP(SEND_ITEM_MAX_HEIGHT)));
 

src/slic3r/GUI/SendToPrinter.cpp

@@ -384,7 +384,7 @@ SendToPrinterDialog::SendToPrinterDialog(Plater *plater)
     //show bind failed info
     m_sw_print_failed_info = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, wxSize(FromDIP(380), FromDIP(125)), wxVSCROLL);
     m_sw_print_failed_info->SetBackgroundColour(*wxWHITE);
-    m_sw_print_failed_info->SetScrollRate(0, 5);
+    m_sw_print_failed_info->SetScrollRate(0, FromDIP(20));
     m_sw_print_failed_info->SetMinSize(wxSize(FromDIP(380), FromDIP(125)));
     m_sw_print_failed_info->SetMaxSize(wxSize(FromDIP(380), FromDIP(125)));
 

src/slic3r/GUI/StatusPanel.cpp

@@ -1302,7 +1302,7 @@ void PrintingTaskPanel::set_star_count(int star_count)
 StatusBasePanel::StatusBasePanel(wxWindow *parent, wxWindowID id, const wxPoint &pos, const wxSize &size, long style, const wxString &name)
     : wxScrolledWindow(parent, id, pos, size, wxHSCROLL | wxVSCROLL)
 {
-    this->SetScrollRate(25, 25);
+    SetScrollRate(25, FromDIP(20));
     Slic3r::DeviceManager* dev = Slic3r::GUI::wxGetApp().getDeviceManager();
     if (!dev) return;
     obj = dev->get_selected_machine();

src/slic3r/GUI/SyncAmsInfoDialog.cpp

@@ -700,7 +700,7 @@ SyncAmsInfoDialog::SyncAmsInfoDialog(wxWindow *parent, SyncInfo &info) :
     //wxBoxSizer *m_scroll_sizer = new wxBoxSizer(wxVERTICAL);
     m_scrolledWindow = new wxScrolledWindow(m_show_page, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxVSCROLL);
     m_scrolledWindow->SetBackgroundColour(*wxWHITE);
-    m_scrolledWindow->SetScrollRate(0, 20);
+    m_scrolledWindow->SetScrollRate(0, FromDIP(20));
     m_scrolledWindow->SetMinSize(wxSize(-1, SyncAmsInfoDialogHeightMAX));
     m_scrolledWindow->SetMaxSize(wxSize(-1, SyncAmsInfoDialogHeightMAX));
     m_scrolledWindow->EnableScrolling(false,true);

src/slic3r/GUI/TextureImportDialog.cpp

@@ -534,7 +534,7 @@ public:
 
         m_content = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxVSCROLL);
         m_content->SetBackgroundColour(pop_bg);
-        m_content->SetScrollRate(0, FromDIP(5));
+        m_content->SetScrollRate(0, FromDIP(20));
         auto* outer = new wxBoxSizer(wxVERTICAL);
 
         const int pop_w   = std::max(FromDIP(213), popup_width);
@@ -2274,7 +2274,7 @@ void TextureImportDialog::build_mapping_panel(wxWindow* parent, wxSizer* sizer)
 
     m_mapping_scroll = new wxScrolledWindow(parent, wxID_ANY, wxDefaultPosition,
                                              wxSize(-1, FromDIP(300)));
-    m_mapping_scroll->SetScrollRate(0, FromDIP(10));
+    m_mapping_scroll->SetScrollRate(0, FromDIP(20));
     m_mapping_scroll->SetBackgroundColour(StateColor::darkModeColorFor(*wxWHITE));
     m_mapping_scroll->Bind(wxEVT_MOUSEWHEEL, &TextureImportDialog::dismiss_filament_popup_on_wheel, this);
 
@@ -4335,7 +4335,7 @@ void TextureImportDialog::on_dpi_changed(const wxRect&)
 
     if (m_mapping_scroll) {
         m_mapping_scroll->SetMinSize(wxSize(-1, FromDIP(300)));
-        m_mapping_scroll->SetScrollRate(0, FromDIP(10));
+        m_mapping_scroll->SetScrollRate(0, FromDIP(20));
     }
 
     if (m_btn_skip) {

src/slic3r/GUI/UnsavedChangesDialog.cpp

@@ -942,7 +942,7 @@ void UnsavedChangesDialog::build(Preset::Type type, PresetCollection *dependent_
     m_sizer_tab->Add(m_table_top, 1, 0, 0);
 
     m_scrolledWindow = new wxScrolledWindow(m_panel_tab, wxID_ANY, wxDefaultPosition, UNSAVE_CHANGE_DIALOG_SCROLL_WINDOW_SIZE,  wxNO_BORDER|wxVSCROLL);
-    m_scrolledWindow->SetScrollRate(0, 5);
+    m_scrolledWindow->SetScrollRate(0, FromDIP(20));
     m_scrolledWindow->SetBackgroundColour(GREY200);
     m_sizer_bottom = new wxBoxSizer(wxVERTICAL);
     m_sizer_bottom->Add(m_scrolledWindow, 1, wxEXPAND, 0);

src/slic3r/GUI/UpdateDialogs.cpp

@@ -130,7 +130,7 @@ MsgUpdateConfig::MsgUpdateConfig(const std::vector<Update> &updates, bool force_
     m_sizer_right->Add(0, 0, 1, wxTOP, FromDIP(15));
 
     auto m_scrollwindw_release_note = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, wxSize(FromDIP(560), FromDIP(430)),wxVSCROLL);
-    m_scrollwindw_release_note->SetScrollRate(0, 5);
+    m_scrollwindw_release_note->SetScrollRate(0, FromDIP(20));
     m_scrollwindw_release_note->SetBackgroundColour(wxColour(0xF8, 0xF8, 0xF8));
     m_scrollwindw_release_note->SetMaxSize(wxSize(FromDIP(560), FromDIP(430)));
     m_scrollwindw_release_note->SetWindowStyle(wxVSCROLL);

src/slic3r/GUI/UpgradePanel.cpp

@@ -1629,7 +1629,7 @@ UpgradePanel::UpgradePanel(wxWindow *parent, wxWindowID id, const wxPoint &pos,
     auto m_main_sizer = new wxBoxSizer(wxVERTICAL);
 
     m_scrolledWindow = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxVSCROLL);
-    m_scrolledWindow->SetScrollRate(5, 25);
+    m_scrolledWindow->SetScrollRate(5, FromDIP(20));
 
     m_machine_list_sizer = new wxBoxSizer(wxVERTICAL);
 

src/slic3r/GUI/Widgets/CheckList.cpp

@@ -62,7 +62,7 @@ CheckList::CheckList(
 
     s_sizer       = new wxBoxSizer(wxVERTICAL);
     m_scroll_area = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, wxDefaultSize, scroll_style);
-    m_scroll_area->SetScrollRate(0, 10);
+    m_scroll_area->SetScrollRate(0, FromDIP(20));
     m_scroll_area->SetSizer(s_sizer);
     m_scroll_area->SetBackgroundColour(parent->GetBackgroundColour());
     m_scroll_area->Bind(wxEVT_RIGHT_DOWN, &CheckList::ShowMenu, this);
@@ -223,4 +223,4 @@ void CheckList::ShowMenu(wxMouseEvent &evt)
     wxPoint screen_pos = src->ClientToScreen(evt.GetPosition());
     wxPoint local_pos  = ScreenToClient(screen_pos);
     PopupMenu(&m, local_pos);
-}
+}

src/slic3r/GUI/Widgets/ProgressDialog.cpp

@@ -199,7 +199,7 @@ bool ProgressDialog::Create(const wxString &title, const wxString &message, int
         m_sizer_main->Add(m_simplebook, 1, wxEXPAND | wxLEFT | wxRIGHT, FromDIP(28));
     } else {
         m_msg_scrolledWindow = new wxScrolledWindow( this, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxVSCROLL );
-        m_msg_scrolledWindow->SetScrollRate(0,5);
+        m_msg_scrolledWindow->SetScrollRate(0, FromDIP(20));
         wxBoxSizer* m_msg_sizer= new wxBoxSizer(wxVERTICAL);
 
         m_msg = new wxStaticText(m_msg_scrolledWindow, wxID_ANY, wxEmptyString, wxDefaultPosition, wxSize(PROGRESSDIALOG_SIMPLEBOOK_SIZE.x, -1), 0);

src/slic3r/GUI/wxExtensions.cpp

@@ -1222,7 +1222,7 @@ ImageTransientPopup::ImageTransientPopup( wxWindow *parent, bool scrolled, wxBit
         m_panel->SetSize(300, 300);
 
         // And also actually enable them.
-        m_panel->SetScrollRate(10, 10);
+        m_panel->SetScrollRate(10, FromDIP(20));
     }
     else
     {

tests/libslic3r/test_3mf.cpp

@@ -19,6 +19,7 @@
 #include <boost/filesystem/operations.hpp>
 #include <boost/algorithm/string/predicate.hpp>
 #include <algorithm>
+#include <functional>
 
 #include <catch2/catch_tostring.hpp>
 #include <Eigen/Core>
@@ -184,16 +185,13 @@ static bool read_cad_recipe_entry(const std::string& path, std::string& out,
     return found;
 }
 
-// Rewrites the archive at `path` with the recipe entry back under the name it had before the
-// rename, which is what every project saved by an earlier build looks like on disk. Generated
-// rather than checked in because a whole project archive is not frozen evidence the way a bare
-// recipe blob is -- it has to be whatever today's exporter writes, with only the name aged.
-// miniz cannot rename in place and open_zip_writer truncates, so the entries are held across
-// the switch.
-static void rename_cad_recipe_entry_to_legacy(const std::string& path)
+// Rewrites the archive at `path`, letting `edit` change the name or data of each entry; returns
+// whether `edit` reported a change for any of them. miniz cannot edit in place and
+// open_zip_writer truncates, so the entries are held across the switch.
+static bool rewrite_3mf_entries(const std::string& path, const std::function<bool(std::string& name, std::string& data)>& edit)
 {
     std::vector<std::pair<std::string, std::string>> entries;
-    bool renamed = false;
+    bool changed = false;
     {
         mz_zip_archive zip;
         mz_zip_zero_struct(&zip);
@@ -208,22 +206,140 @@ static void rename_cad_recipe_entry_to_legacy(const std::string& path)
             std::string data((size_t) st.m_uncomp_size, '\0');
             if (st.m_uncomp_size > 0)
                 REQUIRE(mz_zip_reader_extract_to_mem(&zip, i, data.data(), data.size(), 0));
-            if (boost::algorithm::iequals(name, CAD_RECIPE_ENTRY)) {
-                name    = LEGACY_CAD_RECIPE_ENTRY;
-                renamed = true;
-            }
+            changed |= edit(name, data);
             entries.emplace_back(std::move(name), std::move(data));
         }
         close_zip_reader(&zip);
     }
-    // Without this the scenario would degrade silently into re-testing the new name if the
-    // exporter's constant ever moved again: every load below would still pass.
-    REQUIRE(renamed);
 
     Zipper out(path);
     for (const auto& e : entries)
         out.add_entry(e.first, e.second.data(), e.second.size());
     out.finalize();
+    return changed;
+}
+
+// Rewrites the archive at `path` with the recipe entry back under the name it had before the
+// rename, which is what every project saved by an earlier build looks like on disk. Generated
+// rather than checked in because a whole project archive is not frozen evidence the way a bare
+// recipe blob is -- it has to be whatever today's exporter writes, with only the name aged.
+static void rename_cad_recipe_entry_to_legacy(const std::string& path)
+{
+    const bool renamed = rewrite_3mf_entries(path, [](std::string& name, std::string&) {
+        if (!boost::algorithm::iequals(name, CAD_RECIPE_ENTRY))
+            return false;
+        name = LEGACY_CAD_RECIPE_ENTRY;
+        return true;
+    });
+    // Without this the scenario would degrade silently into re-testing the new name if the
+    // exporter's constant ever moved again: every load below would still pass.
+    REQUIRE(renamed);
+}
+
+// Replaces the first occurrence of `from` in any entry whose name ends with `suffix`.
+static bool replace_in_3mf_entry(const std::string& path, const std::string& suffix, const std::string& from, const std::string& to)
+{
+    bool replaced = false;
+    rewrite_3mf_entries(path, [&](std::string& name, std::string& data) {
+        if (replaced || !boost::algorithm::ends_with(name, suffix))
+            return false;
+        if (const size_t pos = data.find(from); pos != std::string::npos) {
+            data.replace(pos, from.size(), to);
+            replaced = true;
+        }
+        return replaced;
+    });
+    return replaced;
+}
+
+// Stores a one-plate project holding a cube whose first two facets are painted Extruder2 and
+// Extruder3, which the exporter writes as paint_color="8" and paint_color="0C".
+static void store_painted_cube(const std::string& path)
+{
+    Model        model;
+    ModelObject* object = model.add_object();
+    ModelVolume* volume = object->add_volume(make_cube(10., 10., 10.));
+    object->add_instance();
+    {
+        TriangleSelector selector(volume->mesh());
+        selector.set_facet(0, EnforcerBlockerType::Extruder2);
+        selector.set_facet(1, EnforcerBlockerType::Extruder3);
+        REQUIRE(volume->mmu_segmentation_facets.set(selector));
+    }
+    ScopedTemporaryDir backup_dir("orca_paint_src");
+    model.set_backup_path(backup_dir.string());
+
+    DynamicPrintConfig cfg;
+    PlateData          plate;
+    plate.plate_index = 0;
+    StoreParams sp;
+    sp.path     = path.c_str();
+    sp.model    = &model;
+    sp.config   = &cfg;
+    sp.strategy = SaveStrategy::Zip64 | SaveStrategy::Silence;
+    sp.plate_data_list.push_back(&plate);
+    REQUIRE(store_bbs_3mf(sp));
+}
+
+// Loads `path` through the BBS importer into `model`, releasing the plates it returns. The
+// importer stages metadata through `backup_dir`, which has to outlive the model.
+static bool load_project(const std::string& path, Model& model, const ScopedTemporaryDir& backup_dir)
+{
+    model.set_backup_path(backup_dir.string());
+    DynamicPrintConfig        config;
+    ConfigSubstitutionContext ctxt{ ForwardCompatibilitySubstitutionRule::Enable };
+    PlateDataPtrs             plates;
+    std::vector<Preset*>      project_presets;
+    bool   is_bbl_3mf = false, is_orca_3mf = false;
+    Semver file_version;
+    const bool loaded = load_bbs_3mf(path.c_str(), &config, &ctxt, &model, &plates, &project_presets, &is_bbl_3mf,
+                                     &is_orca_3mf, &file_version, nullptr, LoadStrategy::LoadModel | LoadStrategy::LoadConfig);
+    release_PlateData_list(plates);
+    return loaded;
+}
+
+TEST_CASE("A project with a plate id below 1 fails to load", "[3mf][Regression]")
+{
+    const int plate_id = GENERATE(0, -1);
+    INFO("plater_id " << plate_id);
+
+    ScopedTemporaryFile temp(".3mf");
+    store_painted_cube(temp.string());
+    {
+        ScopedTemporaryDir backup_dir("orca_plate_dst");
+        Model              model;
+        REQUIRE(load_project(temp.string(), model, backup_dir));
+    }
+
+    REQUIRE(replace_in_3mf_entry(temp.string(), "model_settings.config", "key=\"plater_id\" value=\"1\"",
+                                 "key=\"plater_id\" value=\"" + std::to_string(plate_id) + "\""));
+    ScopedTemporaryDir backup_dir("orca_plate_dst");
+    Model              model;
+    bool               loaded = true;
+    REQUIRE_NOTHROW(loaded = load_project(temp.string(), model, backup_dir));
+    REQUIRE_FALSE(loaded);
+}
+
+TEST_CASE("A project with malformed paint data loads without the damaged facet", "[3mf][Regression]")
+{
+    ScopedTemporaryFile temp(".3mf");
+    store_painted_cube(temp.string());
+    // Split codes with no children behind them: the stream runs out mid-tree.
+    REQUIRE(replace_in_3mf_entry(temp.string(), ".model", "paint_color=\"8\"", "paint_color=\"FFFFFFFFFFFFFFFF3\""));
+
+    ScopedTemporaryDir backup_dir("orca_paint_dst");
+    Model              model;
+    REQUIRE(load_project(temp.string(), model, backup_dir));
+    REQUIRE(model.objects.size() == 1);
+    const ModelVolume& volume = *model.objects.front()->volumes.front();
+    const auto&        data   = volume.mmu_segmentation_facets.get_data();
+    REQUIRE_FALSE(data.used_states[size_t(EnforcerBlockerType::Extruder2)]);
+    REQUIRE(data.used_states[size_t(EnforcerBlockerType::Extruder3)]);
+
+    TriangleSelector selector(volume.mesh());
+    REQUIRE_NOTHROW(selector.deserialize(data));
+    REQUIRE(selector.num_facets(EnforcerBlockerType::Extruder2) == 0);
+    REQUIRE(selector.num_facets(EnforcerBlockerType::Extruder3) == 1);
 }
 
 // The recipe lives only in the BBS-native backend, because that is the only one that runs:

tests/libslic3r/test_triangle_selector.cpp

@@ -3,6 +3,8 @@
 #include "libslic3r/TriangleSelector.hpp"
 #include "libslic3r/TriangleMesh.hpp"
 
+#include <algorithm>
+
 using namespace Slic3r;
 
 // A sphere gives well over ExtruderMax original facets, so every extruder state can be assigned
@@ -123,3 +125,77 @@ TEST_CASE("Extruder states match the CONST_FILAMENTS hex encoding", "[TriangleSe
     INFO("Hex " << c.hex << " -> extruder " << c.state);
     REQUIRE(TriangleSelector::has_facets(data, EnforcerBlockerType(c.state)));
 }
+
+// Pack 4-bit codes into a bitstream, least significant bit first, in the order the decoder reads them.
+static std::vector<bool> pack_nibbles(const std::vector<int> &nibbles)
+{
+    std::vector<bool> bitstream;
+    for (const int nibble : nibbles)
+        for (int bit = 0; bit < 4; ++bit)
+            bitstream.push_back((nibble >> bit) & 1);
+    return bitstream;
+}
+
+TEST_CASE("A valid paint stream with nested splits round-trips bit for bit", "[TriangleSelector]")
+{
+    const TriangleMesh mesh = test_mesh();
+
+    TriangleSelector::TriangleSplittingData data;
+    data.triangles_to_split.emplace_back(0, 0);
+    // A three-side split whose children, in stream order, are: a one-side split (side 2) into two
+    // leaves, a two-side split (side 1) into leaves of states 20, 0 and 8, then two plain leaves.
+    const std::vector<int> triangle_0 = {0b0011,
+                                         0b1001, 0b1000, 0b0100,
+                                         0b0110, 0b1100, 0b1111, 20 - 18, 0b0000, 0b1100, 8 - 3,
+                                         0b1000,
+                                         0b0100};
+    data.bitstream = pack_nibbles(triangle_0);
+    data.triangles_to_split.emplace_back(5, int(data.bitstream.size()));
+    const std::vector<bool> triangle_5 = pack_nibbles({0b1100, 3 - 3});
+    data.bitstream.insert(data.bitstream.end(), triangle_5.begin(), triangle_5.end());
+    data.reset_used_states();
+    REQUIRE(data.update_used_states(0));
+
+    TriangleSelector restored(mesh);
+    restored.deserialize(data);
+
+    REQUIRE(restored.num_facets(EnforcerBlockerType::Extruder20) == 1);
+    REQUIRE(restored.num_facets(EnforcerBlockerType::Extruder3) == 1);
+    REQUIRE(restored.serialize() == data);
+}
+
+TEST_CASE("A truncated or malformed paint stream drops only the damaged triangle", "[TriangleSelector][Regression]")
+{
+    struct Case { const char *name; std::vector<int> nibbles; };
+    const auto c = GENERATE(values<Case>({
+        {"three-side split missing two children", {0b0011, 0b1000, 0b1000}},
+        {"leaf missing its state nibble",         {0b1100}},
+        {"leaf missing its second state nibble",  {0b1100, 0b1111}},
+        {"splits nested past the end",            {0b0011, 0xF, 0xF, 0xF, 0xF, 0xF, 0xF, 0xF, 0xF,
+                                                    0xF, 0xF, 0xF, 0xF, 0xF, 0xF, 0xF, 0xF}},
+        {"one-side split of the nonexistent side 3", {0b1101, 0b1000, 0b1000}},
+    }));
+    INFO(c.name);
+
+    const TriangleMesh mesh = test_mesh();
+    TriangleSelector   intact(mesh);
+    intact.set_facet(0, EnforcerBlockerType::Extruder2);
+
+    // Triangle 0 stays intact, triangle 1 carries the damaged stream.
+    TriangleSelector::TriangleSplittingData data = intact.serialize();
+    data.triangles_to_split.emplace_back(1, int(data.bitstream.size()));
+    const std::vector<bool> damaged = pack_nibbles(c.nibbles);
+    data.bitstream.insert(data.bitstream.end(), damaged.begin(), damaged.end());
+
+    TriangleSelector restored(mesh);
+    REQUIRE_NOTHROW(restored.deserialize(data));
+    // Triangle 1 unwinds completely, so the selector holds exactly the intact paint.
+    REQUIRE(restored.serialize() == intact.serialize());
+
+    REQUIRE_NOTHROW(TriangleSelector::has_facets(data, EnforcerBlockerType::Extruder3));
+
+    TriangleSelector::TriangleSplittingData recomputed = data;
+    recomputed.reset_used_states();
+    REQUIRE_FALSE(recomputed.update_used_states(0));
+    REQUIRE(std::none_of(recomputed.used_states.begin(), recomputed.used_states.end(), [](bool used) { return used; }));
+}