Fix debug build cmake errors (#14593 )

* Fix debug build after qhull upgrade We upgraded qhull from 8.0.1 to 8.0.2 in 504a5d3b70, which contains a commit qhull/qhull@16159c648c `use same CMake target name for Debug and non-Debug`, so this target name check is no longer required * Fix issue like `IMPORTED_LOCATION not set for imported target "opencv_world" configuration "RelWithDebInfo".` when build Debug config
Keep User Preset Values on Extruder Variants They Don't List (#16046 )
2026-10-02 13:20:59 +00:00 · 2026-10-02 09:46:24 -03:00 · 2026-10-02 20:13:06 +08:00 · 2026-10-02 19:37:29 +08:00 · 2026-10-02 08:24:39 -03:00 · 2026-10-02 19:04:55 +08:00
200 changed files with 8068 additions and 390 deletions
@@ -206,7 +206,8 @@ known class with a pitfall entry and a fixing commit.
 - **macOS:** capture-lost is never sent (a leaked capture freezes all clicks); transient popups hover-
  dismiss across a gap — anchor flush and re-verify the cursor; native modals (file/dir dialogs, native
  message boxes) and generic progress dialogs re-activate the main window, so re-raise a secondary window
-  afterwards with a deferred, liveness-guarded `Raise()`; a live menu accelerator consumes the key before
+  afterwards with a deferred, liveness-guarded `Raise()` — but never `Raise()` a `wxPopupWindow`, which makes
+  it the key window; a live menu accelerator consumes the key before
  any wx key event; Control+click arrives as a right-click.
 - **Windows:** `IsDark()` and `wxSYS_COLOUR_*` follow the system app mode, not Orca's theme — use
  `dark_mode()`; menu bitmaps follow `check_dark_mode()`; windows are not double-buffered by default in
@@ -57,8 +57,9 @@ Contents: [Rules](#rules) · [1. Choosing the window kind](#1-choosing-the-windo
 17. Don't shrink a dropdown below two rows to fit the screen. (§7)
 18. Content that needs typing focus or hosts a `wxWebView` uses a frameless `wxDialog` that hides on
    deactivation, not a transient popup. (§10)
-19. Display-only overlays (HUDs, toasts) use a plain `wxPopupWindow`: it never takes focus and never
-    auto-dismisses. (§4, §10)
+19. Display-only overlays (HUDs, toasts) use a plain `wxPopupWindow`: `Show()` never gives it focus and it
+    never auto-dismisses. Never `Raise()` any `wxPopupWindow`: `Raise()` is for top-level windows only, and on
+    macOS it makes the popup the key window. (§4, §5, §10)
 20. On MSW, don't `SetFocus()` another window on hover while `wxCurrentPopupWindow` is non-null. (§8)
 21. Menu items use `wxID_ANY` and read `item->GetId()`. `wxNewId()` is deprecated. (§13)
 22. Set a menu item's bitmap before `Append`. Don't expect icons on check or radio items. Never call
@@ -356,6 +357,13 @@ compensates for (§6).
  with `ShowWithoutActivating` → `setHidesOnDeactivate:YES` + `orderFront` (`src/osx/carbon/popupwin.cpp:56-75`,
  `nonownedwnd.mm:938-945`). When the app deactivates, Cocoa hides the panel and shows it again on reactivation.
  wx never calls `OnDismiss`, and `IsShown()` stays true. This applies to plain `wxPopupWindow` overlays too.
+- `Raise()` activates the popup. It is `makeKeyAndOrderFront` (`src/osx/nonownedwnd_osx.cpp:289-295`,
+  `nonownedwnd.mm:897-899`), and `wxNSPanel` answers `canBecomeKeyWindow` with YES (`nonownedwnd.mm:271`), so
+  the popup becomes the key window. Keys go to it, and the frame loses key status: `windowDidResignKey` →
+  `HandleActivated(0, false)` → `wxEVT_ACTIVATE(false)` on the frame (`nonownedwnd.mm:567-576`,
+  `nonownedwnd_osx.cpp:303-310`). Hiding the key popup gives key back to the frame, which then gets
+  `wxEVT_ACTIVATE(true)` (observed; AppKit behaviour, not in the wx tree). A popup at `NSPopUpMenuWindowLevel`
+  is already above its frame, so `Raise()` buys nothing.
 - Capture: `Show(true)` makes `m_child` capture the mouse ("Assume that the mouse is outside the popup to begin
  with", `popupcmn.cpp:421-426`). `OnIdle` releases the capture while the cursor is inside and re-captures it
  outside, but only when the mouse position has changed since the last idle pass. `s_posLast` is a
@@ -739,8 +747,26 @@ created with `wxBORDER_NONE | wxFRAME_NO_TASKBAR | wxFRAME_FLOAT_ON_PARENT | wxF
 - **Rule:** For overlays that must never take keyboard focus (above a GL surface), use a plain
  `wxPopupWindow(top, wxBORDER_NONE)`, not a `wxFrame`.
  **Why:** A frame took the X input focus and swallowed every shortcut until the user clicked the canvas. A popup
-  window cannot take focus. On macOS these overlays hide while the app is inactive (§5).
+  window does not take focus when shown. On macOS these overlays hide while the app is inactive (§5).
  Cite: `CAD/DesignCanvas.cpp` (`m_hud`, `m_status_hud`).
+- **Rule:** Never `Raise()` a `wxPopupWindow`. To bring an overlay up, `Show()` it if it is hidden, then
+  `Move()` it.
+  **Why:** `Raise()` is documented for top-level windows only (`interface/wx/window.h:3028-3029`), and a popup
+  derives from `wxNonOwnedWindow`, not `wxTopLevelWindow` (`include/wx/popupwin.h:33`). On macOS it makes the
+  popup the key window (§5): the popup takes the keys meant for the window below it, and the frame receives
+  `wxEVT_ACTIVATE(false)`. A frame activate handler that hides the overlay on deactivation and re-places it on
+  activation then loops: each `Raise()` deactivates the frame, the hide reactivates it, and the re-place raises
+  again, recursing until the main thread's stack overflows. A popup's `Show()` is `ShowWithoutActivating`
+  and is safe.
+  ```cpp
+  // Wrong
+  if (!overlay->IsShown()) overlay->Show();
+  overlay->Move(pos);
+  overlay->Raise();
+  // Right
+  if (!overlay->IsShown()) overlay->Show();
+  overlay->Move(pos);
+  ```

 ## 11. wxComboCtrl / wxComboPopup

@@ -428,7 +428,8 @@ this function does *not* show it", top-level windows only (`interface/wx/window.
 since 3.3 (`docs/changes.txt:144-146`). **[source]** MSW = `::SetForegroundWindow`, subject to the
 foreground lock — Windows may only flash the taskbar button (`src/msw/toplevel.cpp:650-655`); GTK =
 `gtk_window_present` only if shown (`src/gtk/toplevel.cpp:1301-1310`; during a deferred X11 first show it
-already counts as shown); macOS = `makeKeyAndOrderFront` only if shown (`src/osx/nonownedwnd_osx.cpp:289-295`, `src/osx/cocoa/nonownedwnd.mm:896-899`).
+already counts as shown); macOS = `makeKeyAndOrderFront` only if shown (`src/osx/nonownedwnd_osx.cpp:289-295`, `src/osx/cocoa/nonownedwnd.mm:897-899`),
+which also makes a `wxPopupWindow` the key window — never `Raise()` a popup (`references/popups-menus.md` §5, §10).

 **Enable.** `Enable(false)` on a parent disables children logically: `IsEnabled()` reflects ancestors,
 `IsThisEnabled()` the window's own flag (`interface/wx/window.h:3060-3070, 3116-3138`). **[source]** On MSW/macOS wx
@@ -49,28 +49,11 @@ jobs:
          key: ${{ inputs.cache-key }}

      - uses: lukka/get-cmake@latest
-        # The windows-11-arm runner needs CMake <= 3.31 (handled in the next step).
-        if: ${{ !(runner.os == 'Windows' && inputs.arch == 'arm64') }}
        with:
          cmakeVersion: "~4.3.0"  # use most recent 4.3.x version
          useLocalCache: true         # <--= Use the local cache (default is 'false').
          useCloudCache: true

-      - name: Install CMake 3.31.x (Windows ARM64)
-        # windows-11-arm ships CMake 4.x, which removed pre-3.5 policy
-        # compatibility AND has incomplete ASM_ARMASM linker modules
-        # (breaks Boost.Context on ARM64). Pin to the last 3.x release.
-        if: runner.os == 'Windows' && inputs.arch == 'arm64'
-        shell: pwsh
-        run: |
-          $ver = "3.31.6"
-          $url = "https://github.com/Kitware/CMake/releases/download/v$ver/cmake-$ver-windows-arm64.zip"
-          Invoke-WebRequest -Uri $url -OutFile "$env:RUNNER_TEMP\cmake.zip"
-          Expand-Archive -Path "$env:RUNNER_TEMP\cmake.zip" -DestinationPath "$env:RUNNER_TEMP\cmake" -Force
-          $cmakeBin = "$env:RUNNER_TEMP\cmake\cmake-$ver-windows-arm64\bin"
-          if (-not (Test-Path "$cmakeBin\cmake.exe")) { throw "cmake.exe not found at $cmakeBin" }
-          Add-Content -Path $env:GITHUB_PATH -Value $cmakeBin
-
      - name: setup dev on Windows
        if: runner.os == 'Windows'
        uses: microsoft/setup-msbuild@v3
@@ -54,28 +54,11 @@ jobs:
          fail-on-cache-miss: true

      - uses: lukka/get-cmake@latest
-        # The windows-11-arm runner needs CMake <= 3.31 (handled in the next step).
-        if: ${{ !(runner.os == 'Windows' && inputs.arch == 'arm64') }}
        with:
          cmakeVersion: "~4.3.0"  # use most recent 4.3.x version
          useLocalCache: true         # <--= Use the local cache (default is 'false').
          useCloudCache: true

-      - name: Install CMake 3.31.x (Windows ARM64)
-        # windows-11-arm ships CMake 4.x, which removed pre-3.5 policy
-        # compatibility AND has incomplete ASM_ARMASM linker modules
-        # (breaks Boost.Context on ARM64). Pin to the last 3.x release.
-        if: runner.os == 'Windows' && inputs.arch == 'arm64'
-        shell: pwsh
-        run: |
-          $ver = "3.31.6"
-          $url = "https://github.com/Kitware/CMake/releases/download/v$ver/cmake-$ver-windows-arm64.zip"
-          Invoke-WebRequest -Uri $url -OutFile "$env:RUNNER_TEMP\cmake.zip"
-          Expand-Archive -Path "$env:RUNNER_TEMP\cmake.zip" -DestinationPath "$env:RUNNER_TEMP\cmake" -Force
-          $cmakeBin = "$env:RUNNER_TEMP\cmake\cmake-$ver-windows-arm64\bin"
-          if (-not (Test-Path "$cmakeBin\cmake.exe")) { throw "cmake.exe not found at $cmakeBin" }
-          Add-Content -Path $env:GITHUB_PATH -Value $cmakeBin
-
      # Compiler cache. Pushes save it, so main keeps it warm; pull requests
      # restore it and discard what they compiled. Objects are keyed on the
      # preprocessed source, the compiler and the flags, so a leg only ever
@@ -44,14 +44,6 @@ jobs:
        uses: actions/download-artifact@v8
        with:
          name: ${{ inputs.artifact }}
-      # run_unit_tests.sh installs the plugin tests' numpy with the uv the build stages
-      # beside them; the Windows arm64 build bundles none, so put one on PATH there.
-      - name: Install uv
-        if: runner.os == 'Windows' && runner.arch == 'ARM64'
-        uses: astral-sh/setup-uv@v10.2.0
-        with:
-          version: "0.11.21"  # ORCA_UV_VERSION in CMakeLists.txt
-          enable-cache: false
      - uses: lukka/get-cmake@latest
        with:
          cmakeVersion: "~4.3.0"  # use most recent 4.3.x version
@@ -135,6 +135,7 @@ set(ORCA_UV_SHA256_aarch64-apple-darwin      "1f921d491ba5ffeea774eb04d6681ecee3
 set(ORCA_UV_SHA256_x86_64-apple-darwin       "f3c8e5708a84b920c18b691214d54d2b0da6b984789caae95d47c95120cb7765")
 set(ORCA_UV_SHA256_aarch64-unknown-linux-gnu "88e800834007cc5efd4675f166eb2a51e7e3ad19876d85fa8805a6fb5c922397")
 set(ORCA_UV_SHA256_x86_64-unknown-linux-gnu  "8c88519b0ef0af9801fcdee419bbb12116bd9e6b18e162ae093c932d8b264050")
+set(ORCA_UV_SHA256_aarch64-pc-windows-msvc   "74e443f8004022dde57a1bd0d10c097830f9ea8feb4ec927db52cd5d805c2f48")
 set(ORCA_UV_SHA256_x86_64-pc-windows-msvc    "ace861f360c6de2babedc1607d0f454b6b09a820dbc8182dc15af927e4df9589")

 # Version-scoped cache dir so a version bump invalidates the cached binary.
@@ -173,7 +174,10 @@ if(NOT ORCA_BUNDLED_UV_EXECUTABLE)
                set(ORCA_UV_ARCH "x86_64-unknown-linux-gnu")
            endif()
        elseif(_orca_uv_proc MATCHES "aarch64|arm64|ARM64")
-            if(APPLE)
+            if(WIN32)
+                set(ORCA_UV_ARCH "aarch64-pc-windows-msvc")
+                set(ORCA_UV_EXT "zip")
+            elseif(APPLE)
                set(ORCA_UV_ARCH "aarch64-apple-darwin")
            else()
                set(ORCA_UV_ARCH "aarch64-unknown-linux-gnu")
@@ -819,7 +823,9 @@ if(SLIC3R_STATIC)
    set(TBB_STATIC 1)
 endif()
 set(TBB_DEBUG 1)
-set(CMAKE_MAP_IMPORTED_CONFIG_RELWITHDEBINFO RelWithDebInfo Release "")
+if ("${CMAKE_BUILD_TYPE}" STREQUAL "RelWithDebInfo" OR MSVC)
+    set(CMAKE_MAP_IMPORTED_CONFIG_RELWITHDEBINFO RelWithDebInfo Release "")
+endif()
 find_package(TBB REQUIRED)
 # include_directories(SYSTEM ${TBB_INCLUDE_DIRS})
 # add_definitions(${TBB_DEFINITIONS})
@@ -1301,6 +1307,14 @@ if (WIN32)
    endif()
    set(CMAKE_INSTALL_SYSTEM_RUNTIME_LIBS_SKIP TRUE)
    include(InstallRequiredSystemLibraries)
+    # A missing MSVC runtime is an error because an installer without it cannot start on a clean machine.
+    set(_orca_runtime_names ${CMAKE_INSTALL_SYSTEM_RUNTIME_LIBS})
+    list(TRANSFORM _orca_runtime_names REPLACE "^.*/" "")
+    if (MSVC AND (NOT "msvcp140.dll" IN_LIST _orca_runtime_names OR NOT "vcruntime140.dll" IN_LIST _orca_runtime_names))
+        set(_orca_runtime_error "CMake ${CMAKE_VERSION} did not find msvcp140.dll and vcruntime140.dll for MSVC ${MSVC_VERSION}. Update CMake to a release that supports this Visual Studio.")
+        message(WARNING "${_orca_runtime_error}")
+        install(CODE "message(FATAL_ERROR \"${_orca_runtime_error}\")")
+    endif ()
    install (PROGRAMS ${CMAKE_INSTALL_SYSTEM_RUNTIME_LIBS} DESTINATION ".")
 elseif (SLIC3R_FHS)
    # CMAKE_INSTALL_FULL_DATAROOTDIR: read-only architecture-independent data root (share)
@@ -282,11 +282,7 @@ if "%install_deps%" == "ON" (
        call :note_failed "Visual Studio" !errorlevel!
    )

-    REM CMake 4 dropped pre-3.5 policy support and ships incomplete ASM_ARMASM
-    REM linker modules, which breaks Boost.Context on ARM64. CI pins the same way.
-    set "cmake_version_flag="
-    if /I "%arch%" == "ARM64" set "cmake_version_flag=--version 3.31.8"
-    call :print_and_run winget install !winget_args! --id=Kitware.CMake !cmake_version_flag!
+    call :print_and_run winget install !winget_args! --id=Kitware.CMake
    call :note_failed CMake !errorlevel!
    call :print_and_run winget install !winget_args! --id=StrawberryPerl.StrawberryPerl
    call :note_failed Perl !errorlevel!
@@ -29,6 +29,15 @@ if(WIN32)
    # driven through nmake from a Ninja configure step.
    set(_conf_cmd ${CMAKE_COMMAND} -E env ${_openssl_msvc_env} perl Configure )
    set(_cross_comp_prefix_line "")
+    if("${DEPS_ARCH}" STREQUAL "arm64")
+        # OpenSSL's VC configs pass /Gs0, which puts a __chkstk probe in every
+        # function. MSVC 14.51 and 14.52 (VS 2026) for ARM64 emit that call
+        # before the prologue saves LR, so the function returns into itself;
+        # in tls_parse_all_extensions that breaks every TLS handshake. 14.44
+        # (VS 2022) is unaffected. Restore cl's default threshold: Configure
+        # appends /Gs4096 after /Gs0, and the later option wins.
+        set(_openssl_extra_cflags /Gs4096)
+    endif()
    set(_make_cmd ${CMAKE_COMMAND} -E env ${_openssl_msvc_env} nmake)
    set(_install_cmd ${CMAKE_COMMAND} -E env ${_openssl_msvc_env} nmake install_sw )
 else()
@@ -71,6 +80,7 @@ ExternalProject_Add(dep_OpenSSL
        # prefix stays single-layout.
        "--libdir=lib"
        ${_cross_comp_prefix_line}
+        ${_openssl_extra_cflags}
        no-shared
        no-asm
        no-ssl3-method
@@ -19,11 +19,7 @@ if(Qhull_FOUND)
 message(STATUS "Using qhull from system.")
 if(SLIC3R_STATIC)
    slic3r_remap_configs("Qhull::qhullcpp;Qhull::qhullstatic_r" RelWithDebInfo Release)
-    if ("${CMAKE_BUILD_TYPE}" STREQUAL "Debug")
-        target_link_libraries(qhull INTERFACE Qhull::qhullcpp_d Qhull::qhullstatic_rd)
-    else()
-        target_link_libraries(qhull INTERFACE Qhull::qhullcpp Qhull::qhullstatic_r)
-    endif()
+    target_link_libraries(qhull INTERFACE Qhull::qhullcpp Qhull::qhullstatic_r)
 else()
    slic3r_remap_configs("Qhull::qhullcpp;Qhull::qhull_r" RelWithDebInfo Release)
    target_link_libraries(qhull INTERFACE Qhull::qhullcpp Qhull::qhull_r)
@@ -1,6 +1,6 @@
 {
 	"name": "Snapmaker",
-	"version": "02.04.00.16",
+	"version": "02.04.00.17",
 	"force_update": "0",
 	"description": "Snapmaker configurations",
 	"machine_model_list": [
@@ -1448,6 +1448,10 @@
 			"name": "Snapmaker PETG HF @U1 0.2 nozzle",
 			"sub_path": "filament/Snapmaker PETG HF @U1 0.2 nozzle.json"
 		},
+		{
+			"name": "Snapmaker PETG HF @U1 0.4 nozzle",
+			"sub_path": "filament/Snapmaker PETG HF @U1 0.4 nozzle.json"
+		},
 		{
 			"name": "Snapmaker PETG HF @U1 0.6 nozzle",
 			"sub_path": "filament/Snapmaker PETG HF @U1 0.6 nozzle.json"
@@ -1920,6 +1924,122 @@
 			"name": "Snapmaker Breakaway Support For PLA @U1 0.8 nozzle",
 			"sub_path": "filament/Snapmaker Breakaway Support For PLA @U1 0.8 nozzle.json"
 		},
+		{
+			"name": "Generic PETG @U1 0.2 nozzle",
+			"sub_path": "filament/Generic PETG @U1 0.2 nozzle.json"
+		},
+		{
+			"name": "Generic PETG @U1 0.4 nozzle",
+			"sub_path": "filament/Generic PETG @U1 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic PETG @U1 0.6 nozzle",
+			"sub_path": "filament/Generic PETG @U1 0.6 nozzle.json"
+		},
+		{
+			"name": "Generic PETG @U1 0.8 nozzle",
+			"sub_path": "filament/Generic PETG @U1 0.8 nozzle.json"
+		},
+		{
+			"name": "Generic PETG HF @U1 0.2 nozzle",
+			"sub_path": "filament/Generic PETG HF @U1 0.2 nozzle.json"
+		},
+		{
+			"name": "Generic PETG HF @U1 0.4 nozzle",
+			"sub_path": "filament/Generic PETG HF @U1 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic PETG HF @U1 0.6 nozzle",
+			"sub_path": "filament/Generic PETG HF @U1 0.6 nozzle.json"
+		},
+		{
+			"name": "Generic PETG HF @U1 0.8 nozzle",
+			"sub_path": "filament/Generic PETG HF @U1 0.8 nozzle.json"
+		},
+		{
+			"name": "Generic PETG-CF @U1 0.4 nozzle",
+			"sub_path": "filament/Generic PETG-CF @U1 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic PETG-CF @U1 0.6 nozzle",
+			"sub_path": "filament/Generic PETG-CF @U1 0.6 nozzle.json"
+		},
+		{
+			"name": "Generic PETG-CF @U1 0.8 nozzle",
+			"sub_path": "filament/Generic PETG-CF @U1 0.8 nozzle.json"
+		},
+		{
+			"name": "Generic PLA @U1 0.2 nozzle",
+			"sub_path": "filament/Generic PLA @U1 0.2 nozzle.json"
+		},
+		{
+			"name": "Generic PLA @U1 0.4 nozzle",
+			"sub_path": "filament/Generic PLA @U1 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic PLA @U1 0.6 nozzle",
+			"sub_path": "filament/Generic PLA @U1 0.6 nozzle.json"
+		},
+		{
+			"name": "Generic PLA @U1 0.8 nozzle",
+			"sub_path": "filament/Generic PLA @U1 0.8 nozzle.json"
+		},
+		{
+			"name": "Generic PLA High Speed @U1 0.2 nozzle",
+			"sub_path": "filament/Generic PLA High Speed @U1 0.2 nozzle.json"
+		},
+		{
+			"name": "Generic PLA High Speed @U1 0.4 nozzle",
+			"sub_path": "filament/Generic PLA High Speed @U1 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic PLA High Speed @U1 0.6 nozzle",
+			"sub_path": "filament/Generic PLA High Speed @U1 0.6 nozzle.json"
+		},
+		{
+			"name": "Generic PLA High Speed @U1 0.8 nozzle",
+			"sub_path": "filament/Generic PLA High Speed @U1 0.8 nozzle.json"
+		},
+		{
+			"name": "Generic PLA Silk @U1 0.2 nozzle",
+			"sub_path": "filament/Generic PLA Silk @U1 0.2 nozzle.json"
+		},
+		{
+			"name": "Generic PLA Silk @U1 0.4 nozzle",
+			"sub_path": "filament/Generic PLA Silk @U1 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic PLA Silk @U1 0.6 nozzle",
+			"sub_path": "filament/Generic PLA Silk @U1 0.6 nozzle.json"
+		},
+		{
+			"name": "Generic PLA Silk @U1 0.8 nozzle",
+			"sub_path": "filament/Generic PLA Silk @U1 0.8 nozzle.json"
+		},
+		{
+			"name": "Generic PLA-CF @U1 0.4 nozzle",
+			"sub_path": "filament/Generic PLA-CF @U1 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic PLA-CF @U1 0.6 nozzle",
+			"sub_path": "filament/Generic PLA-CF @U1 0.6 nozzle.json"
+		},
+		{
+			"name": "Generic PLA-CF @U1 0.8 nozzle",
+			"sub_path": "filament/Generic PLA-CF @U1 0.8 nozzle.json"
+		},
+		{
+			"name": "Generic TPU @U1 0.4 nozzle",
+			"sub_path": "filament/Generic TPU @U1 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic TPU @U1 0.6 nozzle",
+			"sub_path": "filament/Generic TPU @U1 0.6 nozzle.json"
+		},
+		{
+			"name": "Generic TPU @U1 0.8 nozzle",
+			"sub_path": "filament/Generic TPU @U1 0.8 nozzle.json"
+		},
 		{
 			"name": "PolyTerra J1 PLA",
 			"sub_path": "filament/Polymaker/PolyTerra J1 PLA.json"
@@ -0,0 +1,27 @@
+{
+	"type": "filament",
+	"name": "Generic PETG @U1 0.2 nozzle",
+	"inherits": "Generic PETG @System",
+	"from": "system",
+	"setting_id": "Iw7T4qqDf1fbSAa1",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.2 nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_max_volumetric_speed": [
+		"10",
+		"1"
+	],
+	"fan_min_speed": [
+		"0",
+		"0"
+	],
+	"fan_max_speed": [
+		"40",
+		"40"
+	]
+}
@@ -0,0 +1,27 @@
+{
+	"type": "filament",
+	"name": "Generic PETG @U1 0.4 nozzle",
+	"inherits": "Generic PETG @System",
+	"from": "system",
+	"setting_id": "VHRa4TXU7HPz7Fld",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_max_volumetric_speed": [
+		"10",
+		"12"
+	],
+	"fan_min_speed": [
+		"0",
+		"0"
+	],
+	"fan_max_speed": [
+		"40",
+		"40"
+	]
+}
@@ -0,0 +1,27 @@
+{
+	"type": "filament",
+	"name": "Generic PETG @U1 0.6 nozzle",
+	"inherits": "Generic PETG @System",
+	"from": "system",
+	"setting_id": "Ubr8v7BTxiQMntVk",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_max_volumetric_speed": [
+		"10",
+		"12"
+	],
+	"fan_min_speed": [
+		"0",
+		"0"
+	],
+	"fan_max_speed": [
+		"40",
+		"40"
+	]
+}
@@ -0,0 +1,27 @@
+{
+	"type": "filament",
+	"name": "Generic PETG @U1 0.8 nozzle",
+	"inherits": "Generic PETG @System",
+	"from": "system",
+	"setting_id": "ro0mXCLzC5rY95oX",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_max_volumetric_speed": [
+		"10",
+		"12"
+	],
+	"fan_min_speed": [
+		"0",
+		"0"
+	],
+	"fan_max_speed": [
+		"40",
+		"40"
+	]
+}
@@ -0,0 +1,27 @@
+{
+	"type": "filament",
+	"name": "Generic PETG HF @U1 0.2 nozzle",
+	"inherits": "Generic PETG HF @System",
+	"from": "system",
+	"setting_id": "7yjLWAdcQe4ndo1z",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.2 nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_max_volumetric_speed": [
+		"20",
+		"1"
+	],
+	"fan_min_speed": [
+		"0",
+		"0"
+	],
+	"fan_max_speed": [
+		"40",
+		"40"
+	]
+}
@@ -0,0 +1,27 @@
+{
+	"type": "filament",
+	"name": "Generic PETG HF @U1 0.4 nozzle",
+	"inherits": "Generic PETG HF @System",
+	"from": "system",
+	"setting_id": "XWWLYZWkD9ZNRPeO",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_max_volumetric_speed": [
+		"20",
+		"16"
+	],
+	"fan_min_speed": [
+		"0",
+		"0"
+	],
+	"fan_max_speed": [
+		"40",
+		"40"
+	]
+}
@@ -0,0 +1,27 @@
+{
+	"type": "filament",
+	"name": "Generic PETG HF @U1 0.6 nozzle",
+	"inherits": "Generic PETG HF @System",
+	"from": "system",
+	"setting_id": "1dj4JdFabSql3cEg",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_max_volumetric_speed": [
+		"20",
+		"16"
+	],
+	"fan_min_speed": [
+		"0",
+		"0"
+	],
+	"fan_max_speed": [
+		"40",
+		"40"
+	]
+}
@@ -0,0 +1,27 @@
+{
+	"type": "filament",
+	"name": "Generic PETG HF @U1 0.8 nozzle",
+	"inherits": "Generic PETG HF @System",
+	"from": "system",
+	"setting_id": "1LYZ0KG5kQtaOOKt",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_max_volumetric_speed": [
+		"20",
+		"16"
+	],
+	"fan_min_speed": [
+		"0",
+		"0"
+	],
+	"fan_max_speed": [
+		"40",
+		"40"
+	]
+}
@@ -0,0 +1,27 @@
+{
+	"type": "filament",
+	"name": "Generic PETG-CF @U1 0.4 nozzle",
+	"inherits": "Generic PETG-CF @System",
+	"from": "system",
+	"setting_id": "wIKcBM1qLgzLEUJP",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_max_volumetric_speed": [
+		"11.5",
+		"11"
+	],
+	"fan_min_speed": [
+		"5",
+		"5"
+	],
+	"fan_max_speed": [
+		"40",
+		"40"
+	]
+}
@@ -0,0 +1,23 @@
+{
+	"type": "filament",
+	"name": "Generic PETG-CF @U1 0.6 nozzle",
+	"inherits": "Generic PETG-CF @System",
+	"from": "system",
+	"setting_id": "FvrnBiPbjSvIF3kN",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"fan_min_speed": [
+		"5",
+		"5"
+	],
+	"fan_max_speed": [
+		"40",
+		"40"
+	]
+}
@@ -0,0 +1,23 @@
+{
+	"type": "filament",
+	"name": "Generic PETG-CF @U1 0.8 nozzle",
+	"inherits": "Generic PETG-CF @System",
+	"from": "system",
+	"setting_id": "SCfvzDgUWkFHmbtP",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"fan_min_speed": [
+		"5",
+		"5"
+	],
+	"fan_max_speed": [
+		"40",
+		"40"
+	]
+}
@@ -0,0 +1,31 @@
+{
+	"type": "filament",
+	"name": "Generic PLA @U1 0.2 nozzle",
+	"inherits": "Generic PLA @System",
+	"from": "system",
+	"setting_id": "8pb3tert1D4w0SKP",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.2 nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_max_volumetric_speed": [
+		"12",
+		"1.6"
+	],
+	"fan_min_speed": [
+		"100",
+		"100"
+	],
+	"fan_max_speed": [
+		"100",
+		"100"
+	],
+	"additional_cooling_fan_speed": [
+		"70",
+		"70"
+	]
+}
@@ -0,0 +1,31 @@
+{
+	"type": "filament",
+	"name": "Generic PLA @U1 0.4 nozzle",
+	"inherits": "Generic PLA @System",
+	"from": "system",
+	"setting_id": "Uilm8oVmZzyxE3ba",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_max_volumetric_speed": [
+		"12",
+		"12"
+	],
+	"fan_min_speed": [
+		"100",
+		"100"
+	],
+	"fan_max_speed": [
+		"100",
+		"100"
+	],
+	"additional_cooling_fan_speed": [
+		"70",
+		"70"
+	]
+}
@@ -0,0 +1,31 @@
+{
+	"type": "filament",
+	"name": "Generic PLA @U1 0.6 nozzle",
+	"inherits": "Generic PLA @System",
+	"from": "system",
+	"setting_id": "aj4G9OSdgtQPqpkI",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_max_volumetric_speed": [
+		"12",
+		"12"
+	],
+	"fan_min_speed": [
+		"100",
+		"100"
+	],
+	"fan_max_speed": [
+		"100",
+		"100"
+	],
+	"additional_cooling_fan_speed": [
+		"70",
+		"70"
+	]
+}
@@ -0,0 +1,31 @@
+{
+	"type": "filament",
+	"name": "Generic PLA @U1 0.8 nozzle",
+	"inherits": "Generic PLA @System",
+	"from": "system",
+	"setting_id": "zom29gBgIZmvjFmh",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_max_volumetric_speed": [
+		"12",
+		"12"
+	],
+	"fan_min_speed": [
+		"100",
+		"100"
+	],
+	"fan_max_speed": [
+		"100",
+		"100"
+	],
+	"additional_cooling_fan_speed": [
+		"70",
+		"70"
+	]
+}
@@ -0,0 +1,31 @@
+{
+	"type": "filament",
+	"name": "Generic PLA High Speed @U1 0.2 nozzle",
+	"inherits": "Generic PLA High Speed @System",
+	"from": "system",
+	"setting_id": "rT8e5f81vwUpwPuq",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.2 nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_max_volumetric_speed": [
+		"18",
+		"2"
+	],
+	"fan_min_speed": [
+		"100",
+		"100"
+	],
+	"fan_max_speed": [
+		"100",
+		"100"
+	],
+	"additional_cooling_fan_speed": [
+		"70",
+		"70"
+	]
+}
@@ -0,0 +1,31 @@
+{
+	"type": "filament",
+	"name": "Generic PLA High Speed @U1 0.4 nozzle",
+	"inherits": "Generic PLA High Speed @System",
+	"from": "system",
+	"setting_id": "ZUetX0WveqW8fy6f",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_max_volumetric_speed": [
+		"18",
+		"18"
+	],
+	"fan_min_speed": [
+		"100",
+		"100"
+	],
+	"fan_max_speed": [
+		"100",
+		"100"
+	],
+	"additional_cooling_fan_speed": [
+		"70",
+		"70"
+	]
+}
@@ -0,0 +1,31 @@
+{
+	"type": "filament",
+	"name": "Generic PLA High Speed @U1 0.6 nozzle",
+	"inherits": "Generic PLA High Speed @System",
+	"from": "system",
+	"setting_id": "y2WY6qLA3xKZM1Mm",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_max_volumetric_speed": [
+		"18",
+		"18"
+	],
+	"fan_min_speed": [
+		"100",
+		"100"
+	],
+	"fan_max_speed": [
+		"100",
+		"100"
+	],
+	"additional_cooling_fan_speed": [
+		"70",
+		"70"
+	]
+}
@@ -0,0 +1,31 @@
+{
+	"type": "filament",
+	"name": "Generic PLA High Speed @U1 0.8 nozzle",
+	"inherits": "Generic PLA High Speed @System",
+	"from": "system",
+	"setting_id": "VwXJrdwxvzjlIGal",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_max_volumetric_speed": [
+		"18",
+		"18"
+	],
+	"fan_min_speed": [
+		"100",
+		"100"
+	],
+	"fan_max_speed": [
+		"100",
+		"100"
+	],
+	"additional_cooling_fan_speed": [
+		"70",
+		"70"
+	]
+}
@@ -0,0 +1,31 @@
+{
+	"type": "filament",
+	"name": "Generic PLA Silk @U1 0.2 nozzle",
+	"inherits": "Generic PLA Silk @System",
+	"from": "system",
+	"setting_id": "381SJIDBre8HxHy2",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.2 nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_max_volumetric_speed": [
+		"7.5",
+		"2"
+	],
+	"fan_min_speed": [
+		"100",
+		"100"
+	],
+	"fan_max_speed": [
+		"100",
+		"100"
+	],
+	"additional_cooling_fan_speed": [
+		"70",
+		"70"
+	]
+}
@@ -0,0 +1,27 @@
+{
+	"type": "filament",
+	"name": "Generic PLA Silk @U1 0.4 nozzle",
+	"inherits": "Generic PLA Silk @System",
+	"from": "system",
+	"setting_id": "Fd1g9OdeM3pUx8f5",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"fan_min_speed": [
+		"100",
+		"100"
+	],
+	"fan_max_speed": [
+		"100",
+		"100"
+	],
+	"additional_cooling_fan_speed": [
+		"70",
+		"70"
+	]
+}
@@ -0,0 +1,27 @@
+{
+	"type": "filament",
+	"name": "Generic PLA Silk @U1 0.6 nozzle",
+	"inherits": "Generic PLA Silk @System",
+	"from": "system",
+	"setting_id": "8rhmpBFmMj9vVZwG",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"fan_min_speed": [
+		"100",
+		"100"
+	],
+	"fan_max_speed": [
+		"100",
+		"100"
+	],
+	"additional_cooling_fan_speed": [
+		"70",
+		"70"
+	]
+}
@@ -0,0 +1,27 @@
+{
+	"type": "filament",
+	"name": "Generic PLA Silk @U1 0.8 nozzle",
+	"inherits": "Generic PLA Silk @System",
+	"from": "system",
+	"setting_id": "Fo7U7GYHZh1aZPLs",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"fan_min_speed": [
+		"100",
+		"100"
+	],
+	"fan_max_speed": [
+		"100",
+		"100"
+	],
+	"additional_cooling_fan_speed": [
+		"70",
+		"70"
+	]
+}
@@ -0,0 +1,31 @@
+{
+	"type": "filament",
+	"name": "Generic PLA-CF @U1 0.4 nozzle",
+	"inherits": "Generic PLA-CF @System",
+	"from": "system",
+	"setting_id": "6AWubtDE4PqrKVNJ",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_max_volumetric_speed": [
+		"12",
+		"12"
+	],
+	"fan_min_speed": [
+		"100",
+		"100"
+	],
+	"fan_max_speed": [
+		"100",
+		"100"
+	],
+	"additional_cooling_fan_speed": [
+		"70",
+		"70"
+	]
+}
@@ -0,0 +1,31 @@
+{
+	"type": "filament",
+	"name": "Generic PLA-CF @U1 0.6 nozzle",
+	"inherits": "Generic PLA-CF @System",
+	"from": "system",
+	"setting_id": "AvM44HgMCkOCnmzY",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_max_volumetric_speed": [
+		"12",
+		"12"
+	],
+	"fan_min_speed": [
+		"100",
+		"100"
+	],
+	"fan_max_speed": [
+		"100",
+		"100"
+	],
+	"additional_cooling_fan_speed": [
+		"70",
+		"70"
+	]
+}
@@ -0,0 +1,31 @@
+{
+	"type": "filament",
+	"name": "Generic PLA-CF @U1 0.8 nozzle",
+	"inherits": "Generic PLA-CF @System",
+	"from": "system",
+	"setting_id": "tvYAUvQEbbdBCIg2",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_max_volumetric_speed": [
+		"12",
+		"12"
+	],
+	"fan_min_speed": [
+		"100",
+		"100"
+	],
+	"fan_max_speed": [
+		"100",
+		"100"
+	],
+	"additional_cooling_fan_speed": [
+		"70",
+		"70"
+	]
+}
@@ -0,0 +1,27 @@
+{
+	"type": "filament",
+	"name": "Generic TPU @U1 0.4 nozzle",
+	"inherits": "Generic TPU @System",
+	"from": "system",
+	"setting_id": "9d0jRdMgkPMahYL7",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"fan_min_speed": [
+		"70",
+		"70"
+	],
+	"fan_max_speed": [
+		"70",
+		"70"
+	],
+	"additional_cooling_fan_speed": [
+		"70",
+		"70"
+	]
+}
@@ -0,0 +1,27 @@
+{
+	"type": "filament",
+	"name": "Generic TPU @U1 0.6 nozzle",
+	"inherits": "Generic TPU @System",
+	"from": "system",
+	"setting_id": "LLjEPSU4l09N3Zb8",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"fan_min_speed": [
+		"70",
+		"70"
+	],
+	"fan_max_speed": [
+		"70",
+		"70"
+	],
+	"additional_cooling_fan_speed": [
+		"70",
+		"70"
+	]
+}
@@ -0,0 +1,27 @@
+{
+	"type": "filament",
+	"name": "Generic TPU @U1 0.8 nozzle",
+	"inherits": "Generic TPU @System",
+	"from": "system",
+	"setting_id": "Wfhd3jLEjSKzCeHE",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"fan_min_speed": [
+		"70",
+		"70"
+	],
+	"fan_max_speed": [
+		"70",
+		"70"
+	],
+	"additional_cooling_fan_speed": [
+		"70",
+		"70"
+	]
+}
@@ -10,15 +10,18 @@
 		"Snapmaker U1 (0.4 nozzle)"
 	],
 	"enable_pressure_advance": [
+		"0",
 		"0"
 	],
 	"filament_max_volumetric_speed": [
+		"15",
 		"15"
 	],
 	"filament_vendor": [
 		"Polymaker"
 	],
 	"nozzle_temperature_range_high": [
+		"230",
 		"230"
 	],
 	"temperature_vitrification": [
@@ -29,5 +32,21 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"65"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"fan_min_speed": [
+		"100",
+		"100"
+	],
+	"fan_max_speed": [
+		"100",
+		"100"
+	],
+	"additional_cooling_fan_speed": [
+		"70",
+		"70"
 	]
 }
@@ -16,12 +16,15 @@
 		"Polymaker"
 	],
 	"nozzle_temperature": [
+		"230",
 		"230"
 	],
 	"nozzle_temperature_initial_layer": [
+		"230",
 		"230"
 	],
 	"nozzle_temperature_range_high": [
+		"230",
 		"230"
 	],
 	"textured_plate_temp": [
@@ -29,5 +32,21 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"65"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"fan_min_speed": [
+		"100",
+		"100"
+	],
+	"fan_max_speed": [
+		"100",
+		"100"
+	],
+	"additional_cooling_fan_speed": [
+		"70",
+		"70"
 	]
 }
@@ -13,6 +13,7 @@
 		"1.23"
 	],
 	"filament_flow_ratio": [
+		"0.96",
 		"0.96"
 	],
 	"filament_vendor": [
@@ -29,5 +30,21 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"65"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"fan_min_speed": [
+		"100",
+		"100"
+	],
+	"fan_max_speed": [
+		"100",
+		"100"
+	],
+	"additional_cooling_fan_speed": [
+		"70",
+		"70"
 	]
 }
@@ -9,9 +9,27 @@
 		"Snapmaker U1 (0.4 nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
+		"15",
 		"15"
 	],
 	"pressure_advance": [
+		"0.05",
 		"0.05"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"fan_min_speed": [
+		"10",
+		"10"
+	],
+	"fan_max_speed": [
+		"30",
+		"30"
+	],
+	"additional_cooling_fan_speed": [
+		"0",
+		"0"
 	]
 }
@@ -9,18 +9,35 @@
 		"Snapmaker U1 (0.4 nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
+		"15",
 		"15"
 	],
 	"filament_retraction_length": [
+		"1.0",
 		"1.0"
 	],
 	"filament_z_hop": [
+		"0.0",
 		"0.0"
 	],
 	"enable_pressure_advance": [
+		"1",
 		"1"
 	],
 	"pressure_advance": [
+		"0.05",
 		"0.05"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"fan_min_speed": [
+		"20",
+		"20"
+	],
+	"fan_max_speed": [
+		"50",
+		"50"
 	]
 }
@@ -9,18 +9,35 @@
 		"Snapmaker U1 (0.4 nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
+		"15",
 		"15"
 	],
 	"filament_retraction_length": [
+		"1.0",
 		"1.0"
 	],
 	"filament_z_hop": [
+		"0.0",
 		"0.0"
 	],
 	"enable_pressure_advance": [
+		"1",
 		"1"
 	],
 	"pressure_advance": [
+		"0.08",
 		"0.08"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"fan_min_speed": [
+		"0",
+		"0"
+	],
+	"fan_max_speed": [
+		"10",
+		"10"
 	]
 }
@@ -9,16 +9,32 @@
 		"Snapmaker U1 (0.4 nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
+		"15",
 		"15"
 	],
 	"filament_retraction_length": [
+		"1.0",
 		"1.0"
 	],
 	"filament_z_hop": [
+		"0.0",
 		"0.0"
 	],
 	"description": " ",
 	"enable_pressure_advance": [
+		"1",
 		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"fan_min_speed": [
+		"0",
+		"0"
+	],
+	"fan_max_speed": [
+		"10",
+		"10"
 	]
 }
@@ -9,6 +9,7 @@
 		"Snapmaker U1 (0.4 nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
+		"15",
 		"15"
 	],
 	"supertack_plate_temp": [
@@ -18,6 +19,19 @@
 		"70"
 	],
 	"pressure_advance": [
+		"0.04",
 		"0.04"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"fan_min_speed": [
+		"10",
+		"10"
+	],
+	"fan_max_speed": [
+		"20",
+		"20"
 	]
 }
@@ -9,7 +9,24 @@
 		"Snapmaker U1 (0.4 nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
+		"15",
 		"15"
 	],
-	"description": " "
+	"description": " ",
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"fan_min_speed": [
+		"0",
+		"0"
+	],
+	"fan_max_speed": [
+		"10",
+		"10"
+	],
+	"additional_cooling_fan_speed": [
+		"0",
+		"0"
+	]
 }
@@ -10,6 +10,23 @@
 		"Snapmaker U1 (0.4 nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
+		"15",
 		"15"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"fan_min_speed": [
+		"100",
+		"100"
+	],
+	"fan_max_speed": [
+		"100",
+		"100"
+	],
+	"additional_cooling_fan_speed": [
+		"70",
+		"70"
 	]
 }
@@ -10,9 +10,27 @@
 		"Snapmaker U1 (0.4 nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
+		"15",
 		"15"
 	],
 	"filament_wipe": [
+		"0",
 		"0"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"fan_min_speed": [
+		"100",
+		"100"
+	],
+	"fan_max_speed": [
+		"100",
+		"100"
+	],
+	"additional_cooling_fan_speed": [
+		"70",
+		"70"
 	]
 }
@@ -10,6 +10,23 @@
 		"Snapmaker U1 (0.4 nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
+		"15",
 		"15"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"fan_min_speed": [
+		"100",
+		"100"
+	],
+	"fan_max_speed": [
+		"100",
+		"100"
+	],
+	"additional_cooling_fan_speed": [
+		"70",
+		"70"
 	]
 }
@@ -10,6 +10,23 @@
 		"Snapmaker U1 (0.4 nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
+		"15",
 		"15"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"fan_min_speed": [
+		"100",
+		"100"
+	],
+	"fan_max_speed": [
+		"100",
+		"100"
+	],
+	"additional_cooling_fan_speed": [
+		"70",
+		"70"
 	]
 }
@@ -10,6 +10,23 @@
 		"Snapmaker U1 (0.4 nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
+		"15",
 		"15"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"fan_min_speed": [
+		"100",
+		"100"
+	],
+	"fan_max_speed": [
+		"100",
+		"100"
+	],
+	"additional_cooling_fan_speed": [
+		"70",
+		"70"
 	]
 }
@@ -10,6 +10,23 @@
 		"Snapmaker U1 (0.4 nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
+		"15",
 		"15"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"fan_min_speed": [
+		"100",
+		"100"
+	],
+	"fan_max_speed": [
+		"100",
+		"100"
+	],
+	"additional_cooling_fan_speed": [
+		"70",
+		"70"
 	]
 }
@@ -10,6 +10,23 @@
 		"Snapmaker U1 (0.4 nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
+		"15",
 		"15"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"fan_min_speed": [
+		"100",
+		"100"
+	],
+	"fan_max_speed": [
+		"100",
+		"100"
+	],
+	"additional_cooling_fan_speed": [
+		"70",
+		"70"
 	]
 }
@@ -10,6 +10,23 @@
 		"Snapmaker U1 (0.4 nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
+		"15",
 		"15"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"fan_min_speed": [
+		"100",
+		"100"
+	],
+	"fan_max_speed": [
+		"100",
+		"100"
+	],
+	"additional_cooling_fan_speed": [
+		"70",
+		"70"
 	]
 }
@@ -10,6 +10,23 @@
 		"Snapmaker U1 (0.4 nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
+		"15",
 		"15"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"fan_min_speed": [
+		"100",
+		"100"
+	],
+	"fan_max_speed": [
+		"100",
+		"100"
+	],
+	"additional_cooling_fan_speed": [
+		"70",
+		"70"
 	]
 }
@@ -10,6 +10,23 @@
 		"Snapmaker U1 (0.4 nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
+		"15",
 		"15"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"fan_min_speed": [
+		"100",
+		"100"
+	],
+	"fan_max_speed": [
+		"100",
+		"100"
+	],
+	"additional_cooling_fan_speed": [
+		"70",
+		"70"
 	]
 }
@@ -10,6 +10,23 @@
 		"Snapmaker U1 (0.4 nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
+		"15",
 		"15"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"fan_min_speed": [
+		"100",
+		"100"
+	],
+	"fan_max_speed": [
+		"100",
+		"100"
+	],
+	"additional_cooling_fan_speed": [
+		"70",
+		"70"
 	]
 }
@@ -10,6 +10,23 @@
 		"Snapmaker U1 (0.4 nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
+		"15",
 		"15"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"fan_min_speed": [
+		"100",
+		"100"
+	],
+	"fan_max_speed": [
+		"100",
+		"100"
+	],
+	"additional_cooling_fan_speed": [
+		"70",
+		"70"
 	]
 }
@@ -10,6 +10,23 @@
 		"Snapmaker U1 (0.4 nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
+		"15",
 		"15"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"fan_min_speed": [
+		"100",
+		"100"
+	],
+	"fan_max_speed": [
+		"100",
+		"100"
+	],
+	"additional_cooling_fan_speed": [
+		"70",
+		"70"
 	]
 }
@@ -10,18 +10,30 @@
 		"Snapmaker U1 (0.4 nozzle)"
 	],
 	"fan_max_speed": [
+		"100",
 		"100"
 	],
 	"fan_min_speed": [
+		"100",
 		"100"
 	],
 	"filament_flow_ratio": [
+		"0.98",
 		"0.98"
 	],
 	"filament_max_volumetric_speed": [
+		"15",
 		"15"
 	],
 	"slow_down_layer_time": [
 		"4"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"additional_cooling_fan_speed": [
+		"70",
+		"70"
 	]
 }
@@ -10,6 +10,23 @@
 		"Snapmaker U1 (0.4 nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
+		"15",
 		"15"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"fan_min_speed": [
+		"100",
+		"100"
+	],
+	"fan_max_speed": [
+		"100",
+		"100"
+	],
+	"additional_cooling_fan_speed": [
+		"70",
+		"70"
 	]
 }
@@ -10,6 +10,23 @@
 		"Snapmaker U1 (0.4 nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
+		"15",
 		"15"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"fan_min_speed": [
+		"100",
+		"100"
+	],
+	"fan_max_speed": [
+		"100",
+		"100"
+	],
+	"additional_cooling_fan_speed": [
+		"70",
+		"70"
 	]
 }
@@ -9,6 +9,23 @@
 		"Snapmaker U1 (0.4 nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
+		"15",
 		"15"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"fan_min_speed": [
+		"100",
+		"100"
+	],
+	"fan_max_speed": [
+		"100",
+		"100"
+	],
+	"additional_cooling_fan_speed": [
+		"70",
+		"70"
 	]
 }
@@ -9,6 +9,7 @@
 		"Snapmaker U1 (0.4 nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
+		"15",
 		"15"
 	],
 	"supertack_plate_temp": [
@@ -18,6 +19,19 @@
 		"70"
 	],
 	"pressure_advance": [
+		"0.05",
 		"0.05"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"fan_min_speed": [
+		"0",
+		"0"
+	],
+	"fan_max_speed": [
+		"40",
+		"40"
 	]
 }
@@ -9,6 +9,7 @@
 		"Snapmaker U1 (0.4 nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
+		"15",
 		"15"
 	],
 	"supertack_plate_temp": [
@@ -18,6 +19,19 @@
 		"70"
 	],
 	"pressure_advance": [
+		"0.05",
 		"0.05"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"fan_min_speed": [
+		"0",
+		"0"
+	],
+	"fan_max_speed": [
+		"40",
+		"40"
 	]
 }
@@ -10,6 +10,23 @@
 		"Snapmaker U1 (0.4 nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
+		"15",
 		"15"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"fan_min_speed": [
+		"100",
+		"100"
+	],
+	"fan_max_speed": [
+		"100",
+		"100"
+	],
+	"additional_cooling_fan_speed": [
+		"70",
+		"70"
 	]
 }
@@ -9,6 +9,23 @@
 		"Snapmaker U1 (0.4 nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
+		"15",
 		"15"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"fan_min_speed": [
+		"100",
+		"100"
+	],
+	"fan_max_speed": [
+		"100",
+		"100"
+	],
+	"additional_cooling_fan_speed": [
+		"70",
+		"70"
 	]
 }
@@ -9,6 +9,23 @@
 		"Snapmaker U1 (0.4 nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
+		"15",
 		"15"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"fan_min_speed": [
+		"100",
+		"100"
+	],
+	"fan_max_speed": [
+		"100",
+		"100"
+	],
+	"additional_cooling_fan_speed": [
+		"70",
+		"70"
 	]
 }
@@ -9,6 +9,23 @@
 		"Snapmaker U1 (0.4 nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
+		"15",
 		"15"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"fan_min_speed": [
+		"100",
+		"100"
+	],
+	"fan_max_speed": [
+		"100",
+		"100"
+	],
+	"additional_cooling_fan_speed": [
+		"70",
+		"70"
 	]
 }
@@ -9,6 +9,23 @@
 		"Snapmaker U1 (0.4 nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
+		"15",
 		"15"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"fan_min_speed": [
+		"100",
+		"100"
+	],
+	"fan_max_speed": [
+		"100",
+		"100"
+	],
+	"additional_cooling_fan_speed": [
+		"70",
+		"70"
 	]
 }
@@ -10,18 +10,30 @@
 		"Snapmaker U1 (0.4 nozzle)"
 	],
 	"fan_max_speed": [
+		"100",
 		"100"
 	],
 	"fan_min_speed": [
+		"100",
 		"100"
 	],
 	"filament_flow_ratio": [
+		"0.98",
 		"0.98"
 	],
 	"filament_max_volumetric_speed": [
+		"15",
 		"15"
 	],
 	"slow_down_layer_time": [
 		"4"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"additional_cooling_fan_speed": [
+		"70",
+		"70"
 	]
 }
@@ -12,6 +12,7 @@
 		"; filament end gcode \n\n"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
+		"15",
 		"15"
 	],
 	"filament_start_gcode": [
@@ -25,6 +26,23 @@
 		"0"
 	],
 	"enable_pressure_advance": [
+		"0",
+		"0"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"fan_min_speed": [
+		"100",
+		"100"
+	],
+	"fan_max_speed": [
+		"100",
+		"100"
+	],
+	"additional_cooling_fan_speed": [
+		"0",
 		"0"
 	]
 }
@@ -9,6 +9,23 @@
 		"Snapmaker U1 (0.4 nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
+		"15",
 		"15"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"fan_min_speed": [
+		"100",
+		"100"
+	],
+	"fan_max_speed": [
+		"100",
+		"100"
+	],
+	"additional_cooling_fan_speed": [
+		"70",
+		"70"
 	]
 }
@@ -9,6 +9,23 @@
 		"Snapmaker U1 (0.4 nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
+		"15",
 		"15"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"fan_min_speed": [
+		"100",
+		"100"
+	],
+	"fan_max_speed": [
+		"100",
+		"100"
+	],
+	"additional_cooling_fan_speed": [
+		"70",
+		"70"
 	]
 }
@@ -10,6 +10,23 @@
 		"Snapmaker U1 (0.4 nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
+		"15",
 		"15"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"fan_min_speed": [
+		"100",
+		"100"
+	],
+	"fan_max_speed": [
+		"100",
+		"100"
+	],
+	"additional_cooling_fan_speed": [
+		"70",
+		"70"
 	]
 }
@@ -9,6 +9,23 @@
 		"Snapmaker U1 (0.4 nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
+		"15",
 		"15"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"fan_min_speed": [
+		"100",
+		"100"
+	],
+	"fan_max_speed": [
+		"100",
+		"100"
+	],
+	"additional_cooling_fan_speed": [
+		"70",
+		"70"
 	]
 }
@@ -9,6 +9,23 @@
 		"Snapmaker U1 (0.4 nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
+		"15",
 		"15"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"fan_min_speed": [
+		"100",
+		"100"
+	],
+	"fan_max_speed": [
+		"100",
+		"100"
+	],
+	"additional_cooling_fan_speed": [
+		"70",
+		"70"
 	]
 }
@@ -10,6 +10,23 @@
 		"Snapmaker U1 (0.4 nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
+		"15",
 		"15"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"fan_min_speed": [
+		"100",
+		"100"
+	],
+	"fan_max_speed": [
+		"100",
+		"100"
+	],
+	"additional_cooling_fan_speed": [
+		"0",
+		"0"
 	]
 }
@@ -10,6 +10,23 @@
 		"Snapmaker U1 (0.4 nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
+		"15",
 		"15"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"fan_min_speed": [
+		"100",
+		"100"
+	],
+	"fan_max_speed": [
+		"100",
+		"100"
+	],
+	"additional_cooling_fan_speed": [
+		"0",
+		"0"
 	]
 }
@@ -9,6 +9,7 @@
 		"Snapmaker U1 (0.4 nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
+		"15",
 		"15"
 	],
 	"supertack_plate_temp": [
@@ -16,5 +17,17 @@
 	],
 	"supertack_plate_temp_initial_layer": [
 		"70"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"fan_min_speed": [
+		"50",
+		"50"
+	],
+	"fan_max_speed": [
+		"10",
+		"10"
 	]
 }
@@ -9,6 +9,7 @@
 		"Snapmaker U1 (0.4 nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
+		"15",
 		"15"
 	],
 	"supertack_plate_temp": [
@@ -16,5 +17,17 @@
 	],
 	"supertack_plate_temp_initial_layer": [
 		"70"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"fan_min_speed": [
+		"50",
+		"50"
+	],
+	"fan_max_speed": [
+		"10",
+		"10"
 	]
 }
@@ -9,12 +9,27 @@
 		"Snapmaker U1 (0.4 nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
+		"15",
 		"15"
 	],
 	"filament_extruder_variant": [
-		"Direct Drive Standard"
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
 	],
 	"pressure_advance": [
+		"0.05",
 		"0.05"
+	],
+	"fan_min_speed": [
+		"100",
+		"100"
+	],
+	"fan_max_speed": [
+		"100",
+		"100"
+	],
+	"additional_cooling_fan_speed": [
+		"0",
+		"0"
 	]
 }
@@ -9,6 +9,23 @@
 		"Snapmaker U1 (0.4 nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
+		"15",
 		"15"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"fan_min_speed": [
+		"100",
+		"100"
+	],
+	"fan_max_speed": [
+		"100",
+		"100"
+	],
+	"additional_cooling_fan_speed": [
+		"0",
+		"0"
 	]
 }
@@ -9,6 +9,23 @@
 		"Snapmaker U1 (0.4 nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
+		"15",
 		"15"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"fan_min_speed": [
+		"100",
+		"100"
+	],
+	"fan_max_speed": [
+		"100",
+		"100"
+	],
+	"additional_cooling_fan_speed": [
+		"0",
+		"0"
 	]
 }
@@ -9,6 +9,59 @@
 		"Snapmaker U1 (0.4 nozzle)"
 	],
 	"filament_retract_length_toolchange": [
+		"5",
 		"5"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"Slope Lift"
+	],
+	"filament_multitool_ramming": [
+		"0",
+		"1"
+	],
+	"nozzle_temperature": [
+		"260",
+		"280"
+	],
+	"filament_max_volumetric_speed": [
+		"8",
+		"22"
+	],
+	"fan_max_speed": [
+		"15",
+		"60"
+	],
+	"additional_cooling_fan_speed": [
+		"0",
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"10",
+		"30"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"0",
+		"15"
+	],
+	"fan_min_speed": [
+		"15",
+		"10"
+	],
+	"filament_multitool_ramming_volume": [
+		"0",
+		"5"
+	],
+	"nozzle_temperature_initial_layer": [
+		"260",
+		"280"
+	],
+	"filament_retraction_length": [
+		"0.6",
+		"0.2"
 	]
 }
@@ -22,33 +22,43 @@
 		"2"
 	],
 	"filament_deretraction_speed": [
+		"55",
 		"55"
 	],
 	"filament_max_volumetric_speed": [
+		"31",
 		"31"
 	],
 	"filament_retract_when_changing_layer": [
+		"0",
 		"0"
 	],
 	"filament_retraction_length": [
+		"0.5",
 		"0.5"
 	],
 	"filament_z_hop": [
+		"0",
 		"0"
 	],
 	"filament_retraction_speed": [
+		"55",
 		"55"
 	],
 	"filament_wipe": [
+		"0",
 		"0"
 	],
 	"nozzle_temperature": [
+		"250",
 		"250"
 	],
 	"fan_max_speed": [
+		"50",
 		"50"
 	],
 	"fan_min_speed": [
+		"35",
 		"35"
 	],
 	"slow_down_min_speed": [
@@ -59,5 +69,9 @@
 	],
 	"default_filament_colour": [
 		""
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
 	]
 }
@@ -9,6 +9,59 @@
 		"Snapmaker U1 (0.4 nozzle)"
 	],
 	"filament_retract_length_toolchange": [
+		"5",
 		"5"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"Slope Lift"
+	],
+	"filament_multitool_ramming": [
+		"0",
+		"1"
+	],
+	"nozzle_temperature": [
+		"255",
+		"280"
+	],
+	"filament_max_volumetric_speed": [
+		"8",
+		"22"
+	],
+	"fan_max_speed": [
+		"15",
+		"25"
+	],
+	"additional_cooling_fan_speed": [
+		"0",
+		"0"
+	],
+	"pressure_advance": [
+		"0.04",
+		"0.02"
+	],
+	"filament_multitool_ramming_flow": [
+		"10",
+		"20"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"0",
+		"15"
+	],
+	"fan_min_speed": [
+		"0",
+		"10"
+	],
+	"filament_multitool_ramming_volume": [
+		"0",
+		"10"
+	],
+	"nozzle_temperature_initial_layer": [
+		"255",
+		"280"
 	]
 }
@@ -13,24 +13,30 @@
 		"PLA"
 	],
 	"enable_pressure_advance": [
+		"0",
 		"0"
 	],
 	"additional_cooling_fan_speed": [
+		"70",
 		"70"
 	],
 	"close_fan_the_first_x_layers": [
 		"1"
 	],
 	"complete_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"during_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"fan_max_speed": [
+		"30",
 		"30"
 	],
 	"fan_min_speed": [
+		"20",
 		"20"
 	],
 	"filament_cost": [
@@ -40,36 +46,46 @@
 		"1.3"
 	],
 	"filament_deretraction_speed": [
+		"nil",
 		"nil"
 	],
 	"filament_flow_ratio": [
+		"1",
 		"1"
 	],
 	"filament_max_volumetric_speed": [
+		"0.5",
 		"0.5"
 	],
 	"filament_retract_length_toolchange": [
+		"10",
 		"10"
 	],
 	"filament_retraction_length": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_speed": [
+		"nil",
 		"nil"
 	],
 	"hot_plate_temp_initial_layer": [
 		"65"
 	],
 	"nozzle_temperature": [
+		"240",
 		"240"
 	],
 	"nozzle_temperature_initial_layer": [
+		"240",
 		"240"
 	],
 	"nozzle_temperature_range_low": [
+		"190",
 		"190"
 	],
 	"pressure_advance": [
+		"0.2",
 		"0.2"
 	],
 	"textured_plate_temp": [
@@ -85,15 +101,19 @@
 		"28"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
+		"15",
 		"15"
 	],
 	"filament_multitool_ramming": [
+		"1",
 		"1"
 	],
 	"filament_multitool_ramming_flow": [
+		"5",
 		"5"
 	],
 	"filament_multitool_ramming_volume": [
+		"5",
 		"5"
 	],
 	"filament_unloading_speed": [
@@ -101,5 +121,9 @@
 	],
 	"filament_unloading_speed_start": [
 		"100"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
 	]
 }
@@ -13,6 +13,7 @@
 		"PLA"
 	],
 	"enable_pressure_advance": [
+		"0",
 		"0"
 	],
 	"filament_cost": [
@@ -22,21 +23,26 @@
 		"1.3"
 	],
 	"filament_flow_ratio": [
+		"0.95",
 		"0.95"
 	],
 	"hot_plate_temp_initial_layer": [
 		"65"
 	],
 	"nozzle_temperature": [
+		"210",
 		"210"
 	],
 	"nozzle_temperature_initial_layer": [
+		"210",
 		"210"
 	],
 	"nozzle_temperature_range_low": [
+		"190",
 		"190"
 	],
 	"pressure_advance": [
+		"0.02",
 		"0.02"
 	],
 	"textured_plate_temp": [
@@ -46,36 +52,46 @@
 		"65"
 	],
 	"additional_cooling_fan_speed": [
+		"70",
 		"70"
 	],
 	"close_fan_the_first_x_layers": [
 		"1"
 	],
 	"complete_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"during_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"fan_min_speed": [
+		"100",
 		"100"
 	],
 	"filament_deretraction_speed": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_length_toolchange": [
+		"10",
 		"10"
 	],
 	"filament_retraction_length": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_minimum_travel": [
+		"1",
 		"1"
 	],
 	"filament_retraction_speed": [
+		"nil",
 		"nil"
 	],
 	"filament_wipe_distance": [
+		"2",
 		"2"
 	],
 	"filament_cooling_moves": [
@@ -85,15 +101,19 @@
 		"28"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
+		"15",
 		"15"
 	],
 	"filament_multitool_ramming": [
+		"1",
 		"1"
 	],
 	"filament_multitool_ramming_flow": [
+		"20",
 		"20"
 	],
 	"filament_multitool_ramming_volume": [
+		"5",
 		"5"
 	],
 	"filament_unloading_speed": [
@@ -101,5 +121,13 @@
 	],
 	"filament_unloading_speed_start": [
 		"100"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"fan_max_speed": [
+		"100",
+		"100"
 	]
 }
@@ -13,18 +13,22 @@
 		"PLA"
 	],
 	"enable_pressure_advance": [
+		"0",
 		"0"
 	],
 	"additional_cooling_fan_speed": [
+		"70",
 		"70"
 	],
 	"close_fan_the_first_x_layers": [
 		"1"
 	],
 	"complete_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"during_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"filament_cost": [
@@ -34,33 +38,42 @@
 		"1.3"
 	],
 	"filament_deretraction_speed": [
+		"nil",
 		"nil"
 	],
 	"filament_flow_ratio": [
+		"0.93",
 		"0.93"
 	],
 	"filament_retract_length_toolchange": [
+		"10",
 		"10"
 	],
 	"filament_retraction_length": [
+		"3",
 		"3"
 	],
 	"filament_retraction_speed": [
+		"nil",
 		"nil"
 	],
 	"hot_plate_temp_initial_layer": [
 		"65"
 	],
 	"nozzle_temperature": [
+		"210",
 		"210"
 	],
 	"nozzle_temperature_initial_layer": [
+		"210",
 		"210"
 	],
 	"nozzle_temperature_range_low": [
+		"190",
 		"190"
 	],
 	"pressure_advance": [
+		"0.015",
 		"0.015"
 	],
 	"textured_plate_temp_initial_layer": [
@@ -73,15 +86,19 @@
 		"28"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
+		"15",
 		"15"
 	],
 	"filament_multitool_ramming": [
+		"1",
 		"1"
 	],
 	"filament_multitool_ramming_flow": [
+		"20",
 		"20"
 	],
 	"filament_multitool_ramming_volume": [
+		"5",
 		"5"
 	],
 	"filament_unloading_speed": [
@@ -91,9 +108,18 @@
 		"100"
 	],
 	"fan_min_speed": [
+		"100",
 		"100"
 	],
 	"textured_plate_temp": [
 		"65"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"fan_max_speed": [
+		"100",
+		"100"
 	]
 }
@@ -13,54 +13,68 @@
 		"PLA"
 	],
 	"enable_pressure_advance": [
+		"1",
 		"1"
 	],
 	"additional_cooling_fan_speed": [
+		"70",
 		"70"
 	],
 	"close_fan_the_first_x_layers": [
 		"1"
 	],
 	"complete_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"during_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"fan_min_speed": [
+		"100",
 		"100"
 	],
 	"filament_cooling_moves": [
 		"4"
 	],
 	"filament_deretraction_speed": [
+		"nil",
 		"nil"
 	],
 	"filament_flow_ratio": [
+		"1",
 		"1"
 	],
 	"filament_loading_speed": [
 		"28"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
+		"20",
 		"20"
 	],
 	"filament_multitool_ramming": [
+		"1",
 		"1"
 	],
 	"filament_multitool_ramming_flow": [
+		"20",
 		"20"
 	],
 	"filament_multitool_ramming_volume": [
+		"5",
 		"5"
 	],
 	"filament_retract_length_toolchange": [
+		"5",
 		"5"
 	],
 	"filament_retraction_length": [
+		"1",
 		"1"
 	],
 	"filament_retraction_speed": [
+		"nil",
 		"nil"
 	],
 	"filament_unloading_speed": [
@@ -73,15 +87,19 @@
 		"65"
 	],
 	"nozzle_temperature": [
+		"210",
 		"210"
 	],
 	"nozzle_temperature_initial_layer": [
+		"210",
 		"210"
 	],
 	"nozzle_temperature_range_low": [
+		"190",
 		"190"
 	],
 	"pressure_advance": [
+		"0.03",
 		"0.03"
 	],
 	"textured_plate_temp": [
@@ -89,5 +107,17 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"65"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_max_volumetric_speed": [
+		"12",
+		"18"
+	],
+	"fan_max_speed": [
+		"100",
+		"100"
 	]
 }
@@ -7,5 +7,17 @@
 	"instantiation": "true",
 	"compatible_printers": [
 		"Snapmaker U1 (0.4 nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"fan_min_speed": [
+		"15",
+		"15"
+	],
+	"fan_max_speed": [
+		"50",
+		"50"
 	]
 }
@@ -7,5 +7,17 @@
 	"instantiation": "true",
 	"compatible_printers": [
 		"Snapmaker U1 (0.4 nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"fan_min_speed": [
+		"26",
+		"26"
+	],
+	"fan_max_speed": [
+		"50",
+		"50"
 	]
 }
@@ -7,5 +7,17 @@
 	"instantiation": "true",
 	"compatible_printers": [
 		"Snapmaker U1 (0.4 nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"fan_min_speed": [
+		"0",
+		"0"
+	],
+	"fan_max_speed": [
+		"20",
+		"20"
 	]
 }
@@ -6,24 +6,30 @@
 	"setting_id": "Ujul2YTBwfldFiFd",
 	"instantiation": "true",
 	"filament_extruder_variant": [
-		"Direct Drive Standard"
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
 	],
 	"filament_max_volumetric_speed": [
-		"1"
+		"1",
+		"2"
 	],
 	"filament_ramming_travel_time": [
+		"0",
 		"0"
 	],
 	"long_retractions_when_ec": [
+		"0",
 		"0"
 	],
 	"retraction_distances_when_ec": [
+		"0",
 		"0"
 	],
 	"compatible_printers": [
 		"Snapmaker U1 (0.2 nozzle)"
 	],
 	"additional_cooling_fan_speed": [
+		"70",
 		"70"
 	],
 	"eng_plate_temp": [
@@ -36,27 +42,34 @@
 		"20"
 	],
 	"fan_max_speed": [
+		"60",
 		"60"
 	],
 	"fan_min_speed": [
+		"30",
 		"30"
 	],
 	"filament_end_gcode": [
 		"\n\n"
 	],
 	"filament_multitool_ramming": [
+		"1",
 		"1"
 	],
 	"filament_multitool_ramming_flow": [
+		"3",
 		"3"
 	],
 	"filament_multitool_ramming_volume": [
+		"5",
 		"5"
 	],
 	"filament_retract_length_toolchange": [
+		"5",
 		"5"
 	],
 	"filament_retraction_length": [
+		"1.5",
 		"1.5"
 	],
 	"filament_start_gcode": [
@@ -72,12 +85,15 @@
 		"80"
 	],
 	"nozzle_temperature": [
+		"245",
 		"245"
 	],
 	"nozzle_temperature_initial_layer": [
-		"245"
+		"245",
+		"230"
 	],
 	"nozzle_temperature_range_low": [
+		"230",
 		"230"
 	],
 	"overhang_fan_speed": [
@@ -102,6 +118,15 @@
 		"80"
 	],
 	"filament_z_hop_types": [
+		"Slope Lift",
 		"Slope Lift"
+	],
+	"pressure_advance": [
+		"0.03",
+		"0.0525"
+	],
+	"filament_flow_ratio": [
+		"0.95",
+		"0.955"
 	]
 }
@@ -0,0 +1,91 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PETG HF @U1 0.4 nozzle",
+	"inherits": "Snapmaker PETG HF @U1 base2",
+	"from": "system",
+	"setting_id": "9NnYt52azW8zCp4a",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15",
+		"50"
+	],
+	"nozzle_temperature_range_low": [
+		"220",
+		"230"
+	],
+	"fan_max_speed": [
+		"40",
+		"60"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220",
+		"230"
+	],
+	"nozzle_temperature": [
+		"220",
+		"245"
+	],
+	"filament_multitool_ramming_volume": [
+		"0",
+		"8"
+	],
+	"filament_retraction_length": [
+		"nil",
+		"0.8"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"1"
+	],
+	"filament_max_volumetric_speed": [
+		"16",
+		"30"
+	],
+	"filament_retract_length_toolchange": [
+		"nil",
+		"8"
+	],
+	"pressure_advance": [
+		"0.03",
+		"0.035"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"40"
+	],
+	"filament_multitool_ramming_flow": [
+		"10",
+		"30"
+	],
+	"fan_min_speed": [
+		"20",
+		"30"
+	],
+	"filament_flow_ratio": [
+		"0.95",
+		"0.955"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"Slope Lift"
+	],
+	"filament_multitool_ramming": [
+		"0",
+		"1"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"40"
+	],
+	"additional_cooling_fan_speed": [
+		"0",
+		"0"
+	]
+}
@@ -6,21 +6,26 @@
 	"setting_id": "2FfQZdp5xunngnF0",
 	"instantiation": "true",
 	"filament_extruder_variant": [
-		"Direct Drive Standard"
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
 	],
 	"filament_ramming_travel_time": [
+		"0",
 		"0"
 	],
 	"long_retractions_when_ec": [
+		"0",
 		"0"
 	],
 	"retraction_distances_when_ec": [
+		"0",
 		"0"
 	],
 	"compatible_printers": [
 		"Snapmaker U1 (0.6 nozzle)"
 	],
 	"additional_cooling_fan_speed": [
+		"70",
 		"70"
 	],
 	"eng_plate_temp": [
@@ -33,30 +38,38 @@
 		"20"
 	],
 	"fan_max_speed": [
+		"60",
 		"60"
 	],
 	"fan_min_speed": [
+		"30",
 		"30"
 	],
 	"filament_end_gcode": [
 		"\n"
 	],
 	"filament_max_volumetric_speed": [
+		"20",
 		"20"
 	],
 	"filament_multitool_ramming": [
+		"1",
 		"1"
 	],
 	"filament_multitool_ramming_flow": [
+		"20",
 		"20"
 	],
 	"filament_multitool_ramming_volume": [
+		"5",
 		"5"
 	],
 	"filament_retract_length_toolchange": [
+		"5",
 		"5"
 	],
 	"filament_retraction_length": [
+		"2.5",
 		"2.5"
 	],
 	"filament_start_gcode": [
@@ -66,12 +79,15 @@
 		"Snapmaker"
 	],
 	"filament_wipe": [
+		"1",
 		"1"
 	],
 	"filament_wipe_distance": [
+		"1",
 		"1"
 	],
 	"filament_z_hop_types": [
+		"Slope Lift",
 		"Slope Lift"
 	],
 	"hot_plate_temp": [
@@ -81,12 +97,15 @@
 		"80"
 	],
 	"nozzle_temperature": [
+		"245",
 		"245"
 	],
 	"nozzle_temperature_initial_layer": [
-		"245"
+		"245",
+		"230"
 	],
 	"nozzle_temperature_range_low": [
+		"230",
 		"230"
 	],
 	"overhang_fan_speed": [
@@ -109,5 +128,13 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"80"
+	],
+	"pressure_advance": [
+		"0.03",
+		"0.0525"
+	],
+	"filament_flow_ratio": [
+		"0.95",
+		"0.955"
 	]
 }
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
Noisyfox	6c6e8be43d	Fix debug build cmake errors (#14593 ) * Fix debug build after qhull upgrade We upgraded qhull from 8.0.1 to 8.0.2 in `504a5d3b70`, which contains a commit qhull/qhull@16159c648c `use same CMake target name for Debug and non-Debug`, so this target name check is no longer required * Fix issue like `IMPORTED_LOCATION not set for imported target "opencv_world" configuration "RelWithDebInfo".` when build Debug config	2026-10-02 09:46:24 -03:00
HanifKohandSoftFever	205de9ce63	Keep User Preset Values on Extruder Variants They Don't List (#16046 ) * Keep User Preset Values on Extruder Variants They Don't List A user preset stores the variant list its parent had when it was saved. When the parent later gains variants, update_diff_values_to_child_config matched variants by name only and left the new ones at the parent's value, so the user's settings were silently replaced there, and a re-save wrote the system values into the user's file. An unmatched parent variant now takes the child's first variant of the same extruder, the rule slicing already uses in get_config_index_base. A child without a variant list covers the parent's first extruder. The name match also no longer indexes the child's extruder ids when it has none. * Share One Variant Column Rule Between Slicing, User Presets and Projects Three places chose which variant column a value comes from, each with its own copy of "the same variant and owner, else the owner's first column": get_config_index_base when slicing, the user preset merge in update_diff_values_to_child_config, and normalize_filament_values_to_variants for projects and the CLI. find_variant_column now holds that rule and map_variant_columns applies it to a variant list, so a change to how missing variants are filled reaches all three. Each caller keeps its own copy step. There is no behaviour change: G-code is identical before and after. The one relaxation is that get_config_index_base no longer reads past a short id list when its two lists differ in length, which its assert already rules out. * Rename variant column helpers to variant index --------- Co-authored-by: SoftFever <softfeverever@gmail.com>	2026-10-02 20:13:06 +08:00
Ian Chua SoftFever SoftFever	1255af1e9c	Bundle uv in Windows ARM64 builds (#16070 ) * fix: include bundled UV binary for arm64 * fix: update unit test CI * Install unit-test numpy only with the bundled uv * Simplify the unit-test script's uv lookup --------- Co-authored-by: SoftFever <103989404+SoftFever@users.noreply.github.com> Co-authored-by: SoftFever <softfeverever@gmail.com>	2026-10-02 19:37:29 +08:00
Kris Austin	8bf7b73141	ci: build Windows ARM64 with CMake 4.3 like the other platforms (#16052 ) The ARM64 jobs pinned CMake 3.31 because CMake 4 dropped pre-3.5 policy compatibility and its ARMASM support broke Boost.Context. Both are handled now. deps/CMakeLists.txt sets CMAKE_POLICY_VERSION_MINIMUM on CMake 4, and Boost.Context uses the winfib implementation on ARM64, so nothing assembles with armasm. CMake 3.31 also predates VS 2026. Its InstallRequiredSystemLibraries treats the v145 toolset as v143, searches only the VS 2017-2022 install directories and finds no runtime, so the ARM64 installer ships without msvcp140.dll and vcruntime140.dll. CMake 4.2 and newer find the VC145 redistributable. get-cmake also installs Ninja, so the ARM64 jobs now use its latest release instead of the one already on the runner, as x64 does. The install now fails when InstallRequiredSystemLibraries returns no msvcp140.dll or vcruntime140.dll, after a configure warning naming the CMake and MSVC versions. A CMake that predates the Visual Studio in use, on a developer machine or after the next runner image update, then stops the installer build instead of shipping one that cannot start. The build_win.bat prerequisite installer drops its matching 3.31.8 pin.	2026-10-02 08:24:39 -03:00
SoftFever	e63c6d0594	Fix Windows ARM64 builds crashing on every HTTPS connection (#16073 )	2026-10-02 19:04:55 +08:00
SoftFever	79a89f817f	Add a never-Raise-a-popup rule to the orca-wxwidgets skill	2026-10-02 18:16:15 +08:00
Eric McCann	83ee4f4476	U1: add HF nozzle variants and output flow type to avoid warnings on printer (#16043 ) This is the bulk of the profile changes for U1 that led to the cooling catiant connection. The ugly end gcode is used by the printer's UI to complain if normal nozzle is installed but the file was sliced for highflow. [How to Download Pull Requests Artifacts for Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)	2026-10-02 18:06:13 +08:00
HanifKoh	390b7d8e6d	Make Painted Multi-Material Slicing Deterministic (#15899 ) * Make Painted Multi-Material Slicing Deterministic Painted (multi-material) models sliced to slightly different G-code on every run: ±1 µm wall coordinates and reordered islands. Hashing each stage of the segmentation across runs showed the projected painted lines and the per-layer Voronoi segmentation were stable; the raw top/bottom projections from slice_mesh_slabs() were not. Three causes, all thread-order dependent: - slice_slabs_make_lines() appends each slab's intersection lines from a parallel facet loop and never restored a canonical order, so the loop start vertices and polygon order from make_slab_loops() depended on scheduling. Sort every slab's lines with the same key slice_make_lines() already uses. - segmentation_top_and_bottom_layers() wrote a layer's shell projections into neighbouring layers' vectors from the parallel loop, relying on a parity double-buffer that assumes TBB ranges are exactly one group wide and aligned, which blocked_range does not guarantee; two threads could append to the same vector. Each source layer now records its projections in its own slot and they are gathered per target layer in source order. - The painted-line sort in post_process_painted_lines() was not a total order: projections of one span from facets of different colours tied on every key and the first one won the span. Colour and end points now break the tie. Three multi-threaded runs of each painted fixture now give one G-code; unpainted output is unchanged. * Test That Slab Slicing Does Not Depend on the Thread Schedule Projects a dense, tilted sphere with slice_mesh_slabs() on one thread and then three times multi-threaded, and requires the polygons to match exactly, vertex order included. Fails without the canonical line sort, passes with it.	2026-10-02 16:51:06 +08:00