Carry existing colour across a bake instead of reindexing it

Baking, painting colour, then baking again left colour debris on surfaces
nothing had painted and destroyed what the earlier bake had laid down.

TextureDisplacementBakeJob::finalize() deserialized the volume's pre-bake
mmu_segmentation_facets into a TriangleSelector built on the post-bake mesh,
on the assumption that the bake is topology-preserving. That holds for the
classic path, which moves vertices and leaves the topology alone, but not for
the one-run pipeline, which rebuilds the mesh. TriangleSelector::deserialize()
only checks that the stored triangle ids are in range, and a bake almost
always grows the triangle count, so every stale id passed that check and
landed on an unrelated face.

Measured on a 26 mm slab baked twice at 0.19 mm with a 750 k budget: 7580
triangles ended up carrying paint neither bake produced, as far as 31 mm from
any colour that was actually laid down, while the first pass's colour was lost
where the second bake left the surface alone.

TriangleSelector::remap_painting() already transfers paint between meshes by
position, and ModelVolume::restore_painting() uses it for the same reason, so
the bake job now uses it too. It runs in process(), on the worker thread: it
builds an AABB tree over both meshes and took around a second on the case
above, which would have frozen the UI in finalize(). The bake's own colour is
still applied last, so it wins where it painted and the rest is kept, which is
what makes successive bakes accumulate rather than overwrite. If the volume is
painted while the bake is running, a timestamp check falls back to the live
mask so that stroke is not dropped.

The out_triangle comment in TextureColorRequest claimed the bake is
topology-preserving, which is what justified the original indexing; it now
says which mesh the colours belong to.

The regression test bakes twice, checks both results are closed, and checks
the first bake's colour survives the second at the positions where it was
laid down and nowhere else.

.github/workflows/build_all.yml

@@ -7,6 +7,7 @@ on:
      - release/*
     paths:
      - 'deps/**'
+     - 'deps_src/**'
      - 'src/**'
      - '**/CMakeLists.txt'
      - 'version.inc'
@@ -14,8 +15,10 @@ on:
      - 'resources/**'
      - ".github/workflows/build_*.yml"
      - ".github/workflows/unit_tests*.yml"
+     - 'build_linux.sh'
      - 'build_win.bat'
      - 'scripts/test_build_win.ps1'
+     - 'build_release_macos.sh'
      - 'scripts/build_preset_cache.*'
      - 'scripts/flatpak/**'
      - 'scripts/msix/**'
@@ -54,7 +57,9 @@ on:
         default: false
 
 concurrency:
-  group: ${{ github.workflow }}-${{ github.event_name }}-${{ github.event.pull_request.number || github.ref }}
+  # cancel_closed_pr_builds.yml joins this group by name, so update that file
+  # with any change here.
+  group: build-all-${{ github.event_name }}-${{ github.event.pull_request.number || github.ref }}
   # Pushes don't cancel a running build, because only a finished branch build
   # saves caches every pull request can restore.
   cancel-in-progress: ${{ github.event_name == 'pull_request' }}

.github/workflows/cancel_closed_pr_builds.yml

@@ -0,0 +1,21 @@
+name: Cancel builds of closed pull requests
+
+on:
+  # pull_request_target needs no approval for first-time contributors and must never
+  # check out pull request code.
+  pull_request_target:
+    types:
+      - closed
+
+permissions: {}
+
+jobs:
+  cancel:
+    # Matches the concurrency group in build_all.yml, so joining it cancels the pull
+    # request's unfinished Build all run.
+    concurrency:
+      group: build-all-pull_request-${{ github.event.pull_request.number }}
+      cancel-in-progress: true
+    runs-on: ubuntu-latest
+    steps:
+      - run: echo "Joined concurrency group build-all-pull_request-${{ github.event.pull_request.number }}."

localization/i18n/zh_CN/OrcaSlicer_zh_CN.po

@@ -7478,7 +7478,7 @@ msgid "Update"
 msgstr "更新"
 
 msgid "Assistant(HMS)"
-msgstr "助理（HMS）"
+msgstr "助手(HMS)"
 
 #, c-format, boost-format
 msgid "Network plug-in v%s"

resources/profiles/FELIX Printers.json

@@ -0,0 +1,790 @@
+{
+	"name": "FELIX Printers",
+	"version": "1.0.0",
+	"force_update": "0",
+	"description": "Configuration file for printers by FELIX Printers",
+	"machine_model_list": [
+		{
+			"name": "FELIX Food Double",
+			"sub_path": "machine/FELIX Food Double.json"
+		},
+		{
+			"name": "FELIX Food Single",
+			"sub_path": "machine/FELIX Food Single.json"
+		},
+		{
+			"name": "FELIX Food Switch",
+			"sub_path": "machine/FELIX Food Switch.json"
+		},
+		{
+			"name": "FELIX Pro 3",
+			"sub_path": "machine/FELIX Pro 3.json"
+		},
+		{
+			"name": "FELIX Pro L 3.0",
+			"sub_path": "machine/FELIX Pro L 3.0.json"
+		},
+		{
+			"name": "FELIX Pro XL 3.0",
+			"sub_path": "machine/FELIX Pro XL 3.0.json"
+		},
+		{
+			"name": "FELIX Tec 4",
+			"sub_path": "machine/FELIX Tec 4.json"
+		}
+	],
+	"machine_list": [
+		{
+			"name": "fdm_all_machines_common",
+			"sub_path": "machine/fdm_all_machines_common.json"
+		},
+		{
+			"name": "fdm_felix_food_common",
+			"sub_path": "machine/fdm_felix_food_common.json"
+		},
+		{
+			"name": "fdm_felix_food_double_common",
+			"sub_path": "machine/fdm_felix_food_double_common.json"
+		},
+		{
+			"name": "fdm_felix_food_switch_common",
+			"sub_path": "machine/fdm_felix_food_switch_common.json"
+		},
+		{
+			"name": "fdm_felix_plastic_common",
+			"sub_path": "machine/fdm_felix_plastic_common.json"
+		},
+		{
+			"name": "fdm_felix_pro_3_common",
+			"sub_path": "machine/fdm_felix_pro_3_common.json"
+		},
+		{
+			"name": "fdm_felix_pro_l_3_common",
+			"sub_path": "machine/fdm_felix_pro_l_3.json"
+		},
+		{
+			"name": "fdm_felix_pro_xl_3_common",
+			"sub_path": "machine/fdm_felix_pro_xl_3_common.json"
+		},
+		{
+			"name": "fdm_felix_tec_common",
+			"sub_path": "machine/fdm_felix_tec_common.json"
+		},
+		{
+			"name": "FELIX Food Single 0.50mm nozzle",
+			"sub_path": "machine/FELIX Food Single 0.50mm nozzle.json"
+		},
+		{
+			"name": "FELIX Food Single 1.00mm nozzle",
+			"sub_path": "machine/FELIX Food Single 1.00mm nozzle.json"
+		},
+		{
+			"name": "FELIX Food Single 2.00mm nozzle",
+			"sub_path": "machine/FELIX Food Single 2.00mm nozzle.json"
+		},
+		{
+			"name": "FELIX Food Single 3.00mm nozzle",
+			"sub_path": "machine/FELIX Food Single 3.00mm nozzle.json"
+		},
+		{
+			"name": "FELIX Food Single 4.00mm nozzle",
+			"sub_path": "machine/FELIX Food Single 4.00mm nozzle.json"
+		},
+		{
+			"name": "FELIX Food Double 0.50mm nozzle",
+			"sub_path": "machine/FELIX Food Double 0.50mm nozzle.json"
+		},
+		{
+			"name": "FELIX Food Double 1.00mm nozzle",
+			"sub_path": "machine/FELIX Food Double 1.00mm nozzle.json"
+		},
+		{
+			"name": "FELIX Food Double 2.00mm nozzle",
+			"sub_path": "machine/FELIX Food Double 2.00mm nozzle.json"
+		},
+		{
+			"name": "FELIX Food Double 3.00mm nozzle",
+			"sub_path": "machine/FELIX Food Double 3.00mm nozzle.json"
+		},
+		{
+			"name": "FELIX Food Double 4.00mm nozzle",
+			"sub_path": "machine/FELIX Food Double 4.00mm nozzle.json"
+		},
+		{
+			"name": "FELIX Food Switch 0.50mm nozzle",
+			"sub_path": "machine/FELIX Food Switch 0.50mm nozzle.json"
+		},
+		{
+			"name": "FELIX Food Switch 1.00mm nozzle",
+			"sub_path": "machine/FELIX Food Switch 1.00mm nozzle.json"
+		},
+		{
+			"name": "FELIX Food Switch 2.00mm nozzle",
+			"sub_path": "machine/FELIX Food Switch 2.00mm nozzle.json"
+		},
+		{
+			"name": "FELIX Food Switch 3.00mm nozzle",
+			"sub_path": "machine/FELIX Food Switch 3.00mm nozzle.json"
+		},
+		{
+			"name": "FELIX Food Switch 4.00mm nozzle",
+			"sub_path": "machine/FELIX Food Switch 4.00mm nozzle.json"
+		},
+		{
+			"name": "FELIX Pro 3 0.25mm nozzle",
+			"sub_path": "machine/FELIX Pro 3 0.25mm nozzle.json"
+		},
+		{
+			"name": "FELIX Pro 3 0.35mm nozzle",
+			"sub_path": "machine/FELIX Pro 3 0.35mm nozzle.json"
+		},
+		{
+			"name": "FELIX Pro 3 0.50mm nozzle",
+			"sub_path": "machine/FELIX Pro 3 0.50mm nozzle.json"
+		},
+		{
+			"name": "FELIX Pro 3 0.70mm nozzle",
+			"sub_path": "machine/FELIX Pro 3 0.70mm nozzle.json"
+		},
+		{
+			"name": "FELIX Pro L 3.0 0.25mm nozzle",
+			"sub_path": "machine/FELIX Pro L 3.0 0.25mm nozzle.json"
+		},
+		{
+			"name": "FELIX Pro L 3.0 0.35mm nozzle",
+			"sub_path": "machine/FELIX Pro L 3.0 0.35mm nozzle.json"
+		},
+		{
+			"name": "FELIX Pro L 3.0 0.50mm nozzle",
+			"sub_path": "machine/FELIX Pro L 3.0 0.50mm nozzle.json"
+		},
+		{
+			"name": "FELIX Pro L 3.0 0.70mm nozzle",
+			"sub_path": "machine/FELIX Pro L 3.0 0.70mm nozzle.json"
+		},
+		{
+			"name": "FELIX Pro XL 3.0 0.25mm nozzle",
+			"sub_path": "machine/FELIX Pro XL 3.0 0.25mm nozzle.json"
+		},
+		{
+			"name": "FELIX Pro XL 3.0 0.35mm nozzle",
+			"sub_path": "machine/FELIX Pro XL 3.0 0.35mm nozzle.json"
+		},
+		{
+			"name": "FELIX Pro XL 3.0 0.50mm nozzle",
+			"sub_path": "machine/FELIX Pro XL 3.0 0.50mm nozzle.json"
+		},
+		{
+			"name": "FELIX Pro XL 3.0 0.70mm nozzle",
+			"sub_path": "machine/FELIX Pro XL 3.0 0.70mm nozzle.json"
+		},
+		{
+			"name": "FELIX Tec 4 0.25mm nozzle",
+			"sub_path": "machine/FELIX Tec 4 0.25mm nozzle.json"
+		},
+		{
+			"name": "FELIX Tec 4 0.35mm nozzle",
+			"sub_path": "machine/FELIX Tec 4 0.35mm nozzle.json"
+		},
+		{
+			"name": "FELIX Tec 4 0.50mm nozzle",
+			"sub_path": "machine/FELIX Tec 4 0.50mm nozzle.json"
+		},
+		{
+			"name": "FELIX Tec 4 0.70mm nozzle",
+			"sub_path": "machine/FELIX Tec 4 0.70mm nozzle.json"
+		}
+	],
+	"process_list": [
+		{
+			"name": "fdm_process_common",
+			"sub_path": "process/fdm_process_common.json"
+		},
+		{
+			"name": "fdm_process_felix_food_common",
+			"sub_path": "process/fdm_process_felix_food_common.json"
+		},
+		{
+			"name": "fdm_process_felix_plastic_common",
+			"sub_path": "process/fdm_process_felix_plastic_common.json"
+		},
+		{
+			"name": "FELIX Food Coarse @ 0.50mm",
+			"sub_path": "process/FELIX Food Coarse @ 0.50mm.json"
+		},
+		{
+			"name": "FELIX Food Coarse @ 1.00mm",
+			"sub_path": "process/FELIX Food Coarse @ 1.00mm.json"
+		},
+		{
+			"name": "FELIX Food Coarse @ 2.00mm",
+			"sub_path": "process/FELIX Food Coarse @ 2.00mm.json"
+		},
+		{
+			"name": "FELIX Food Coarse @ 3.00mm",
+			"sub_path": "process/FELIX Food Coarse @ 3.00mm.json"
+		},
+		{
+			"name": "FELIX Food Coarse @ 4.00mm",
+			"sub_path": "process/FELIX Food Coarse @ 4.00mm.json"
+		},
+		{
+			"name": "FELIX Food Fine @ 0.50mm",
+			"sub_path": "process/FELIX Food Fine @ 0.50mm.json"
+		},
+		{
+			"name": "FELIX Food Fine @ 1.00mm",
+			"sub_path": "process/FELIX Food Fine @ 1.00mm.json"
+		},
+		{
+			"name": "FELIX Food Fine @ 2.00mm",
+			"sub_path": "process/FELIX Food Fine @ 2.00mm.json"
+		},
+		{
+			"name": "FELIX Food Fine @ 3.00mm",
+			"sub_path": "process/FELIX Food Fine @ 3.00mm.json"
+		},
+		{
+			"name": "FELIX Food Fine @ 4.00mm",
+			"sub_path": "process/FELIX Food Fine @ 4.00mm.json"
+		},
+		{
+			"name": "FELIX Food Normal @ 0.50mm",
+			"sub_path": "process/FELIX Food Normal @ 0.50mm.json"
+		},
+		{
+			"name": "FELIX Food Normal @ 1.00mm",
+			"sub_path": "process/FELIX Food Normal @ 1.00mm.json"
+		},
+		{
+			"name": "FELIX Food Normal @ 2.00mm",
+			"sub_path": "process/FELIX Food Normal @ 2.00mm.json"
+		},
+		{
+			"name": "FELIX Food Normal @ 3.00mm",
+			"sub_path": "process/FELIX Food Normal @ 3.00mm.json"
+		},
+		{
+			"name": "FELIX Food Normal @ 4.00mm",
+			"sub_path": "process/FELIX Food Normal @ 4.00mm.json"
+		},
+		{
+			"name": "FELIX Plastic Coarse @ 0.35mm",
+			"sub_path": "process/FELIX Plastic Coarse @ 0.35mm.json"
+		},
+		{
+			"name": "FELIX Plastic Coarse @ 0.50mm",
+			"sub_path": "process/FELIX Plastic Coarse @ 0.50mm.json"
+		},
+		{
+			"name": "FELIX Plastic Coarse @ 0.70mm",
+			"sub_path": "process/FELIX Plastic Coarse @ 0.70mm.json"
+		},
+		{
+			"name": "FELIX Plastic Fine @ 0.25mm",
+			"sub_path": "process/FELIX Plastic Fine @ 0.25mm.json"
+		},
+		{
+			"name": "FELIX Plastic Fine @ 0.35mm",
+			"sub_path": "process/FELIX Plastic Fine @ 0.35mm.json"
+		},
+		{
+			"name": "FELIX Plastic Fine @ 0.50mm",
+			"sub_path": "process/FELIX Plastic Fine @ 0.50mm.json"
+		},
+		{
+			"name": "FELIX Plastic Fine @ 0.70mm",
+			"sub_path": "process/FELIX Plastic Fine @ 0.70mm.json"
+		},
+		{
+			"name": "FELIX Plastic Normal @ 0.25mm",
+			"sub_path": "process/FELIX Plastic Normal @ 0.25mm.json"
+		},
+		{
+			"name": "FELIX Plastic Normal @ 0.35mm",
+			"sub_path": "process/FELIX Plastic Normal @ 0.35mm.json"
+		},
+		{
+			"name": "FELIX Plastic Normal @ 0.50mm",
+			"sub_path": "process/FELIX Plastic Normal @ 0.50mm.json"
+		},
+		{
+			"name": "FELIX Plastic Normal @ 0.70mm",
+			"sub_path": "process/FELIX Plastic Normal @ 0.70mm.json"
+		},
+		{
+			"name": "FELIX Plastic Slightly Coarse @ 0.35mm",
+			"sub_path": "process/FELIX Plastic Slightly Coarse @ 0.35mm.json"
+		},
+		{
+			"name": "FELIX Plastic Slightly Coarse @ 0.50mm",
+			"sub_path": "process/FELIX Plastic Slightly Coarse @ 0.50mm.json"
+		},
+		{
+			"name": "FELIX Plastic Slightly Coarse @ 0.70mm",
+			"sub_path": "process/FELIX Plastic Slightly Coarse @ 0.70mm.json"
+		},
+		{
+			"name": "FELIX Plastic Super Coarse @ 0.70mm",
+			"sub_path": "process/FELIX Plastic Super Coarse @ 0.70mm.json"
+		},
+		{
+			"name": "FELIX Plastic Super Fine @ 0.25mm",
+			"sub_path": "process/FELIX Plastic Super Fine @ 0.25mm.json"
+		},
+		{
+			"name": "FELIX Plastic Super Fine @ 0.35mm",
+			"sub_path": "process/FELIX Plastic Super Fine @ 0.35mm.json"
+		},
+		{
+			"name": "FELIX Plastic Very Coarse @ 0.50mm",
+			"sub_path": "process/FELIX Plastic Very Coarse @ 0.50mm.json"
+		},
+		{
+			"name": "FELIX Plastic Very Coarse @ 0.70mm",
+			"sub_path": "process/FELIX Plastic Very Coarse @ 0.70mm.json"
+		},
+		{
+			"name": "FELIX Plastic Very Fine @ 0.25mm",
+			"sub_path": "process/FELIX Plastic Very Fine @ 0.25mm.json"
+		},
+		{
+			"name": "FELIX Plastic Very Fine @ 0.35mm",
+			"sub_path": "process/FELIX Plastic Very Fine @ 0.35mm.json"
+		},
+		{
+			"name": "FELIX Plastic Very Fine @ 0.50mm",
+			"sub_path": "process/FELIX Plastic Very Fine @ 0.50mm.json"
+		}
+	],
+	"filament_list": [
+		{
+			"name": "fdm_filament_common",
+			"sub_path": "filament/fdm_filament_common.json"
+		},
+		{
+			"name": "fdm_filament_food",
+			"sub_path": "filament/fdm_filament_food.json"
+		},
+		{
+			"name": "fdm_filament_abs",
+			"sub_path": "filament/fdm_filament_abs.json"
+		},
+		{
+			"name": "fdm_filament_asa",
+			"sub_path": "filament/fdm_filament_asa.json"
+		},
+		{
+			"name": "fdm_filament_flex",
+			"sub_path": "filament/fdm_filament_flex.json"
+		},
+		{
+			"name": "fdm_filament_pa",
+			"sub_path": "filament/fdm_filament_pa.json"
+		},
+		{
+			"name": "fdm_filament_pa11cf",
+			"sub_path": "filament/fdm_filament_pa11cf.json"
+		},
+		{
+			"name": "fdm_filament_pc",
+			"sub_path": "filament/fdm_filament_pc.json"
+		},
+		{
+			"name": "fdm_filament_pccf",
+			"sub_path": "filament/fdm_filament_pccf.json"
+		},
+		{
+			"name": "fdm_filament_pet",
+			"sub_path": "filament/fdm_filament_pet.json"
+		},
+		{
+			"name": "fdm_filament_pla",
+			"sub_path": "filament/fdm_filament_pla.json"
+		},
+		{
+			"name": "fdm_filament_pva",
+			"sub_path": "filament/fdm_filament_pva.json"
+		},
+		{
+			"name": "fdm_filament_pvb",
+			"sub_path": "filament/fdm_filament_pvb.json"
+		},
+		{
+			"name": "fdm_filament_tpu",
+			"sub_path": "filament/fdm_filament_tpu.json"
+		},
+		{
+			"name": "Food Medium Plastic Syringe @0.50mm",
+			"sub_path": "filament/FELIXFood/Food Medium Plastic Syringe @0.50mm.json"
+		},
+		{
+			"name": "Food Medium Plastic Syringe @1.00mm",
+			"sub_path": "filament/FELIXFood/Food Medium Plastic Syringe @1.00mm.json"
+		},
+		{
+			"name": "Food Medium Plastic Syringe @2.00mm",
+			"sub_path": "filament/FELIXFood/Food Medium Plastic Syringe @2.00mm.json"
+		},
+		{
+			"name": "Food Medium Plastic Syringe @3.00mm",
+			"sub_path": "filament/FELIXFood/Food Medium Plastic Syringe @3.00mm.json"
+		},
+		{
+			"name": "Food Medium Plastic Syringe @4.00mm",
+			"sub_path": "filament/FELIXFood/Food Medium Plastic Syringe @4.00mm.json"
+		},
+		{
+			"name": "Food Medium Stainless Steel Syringe @0.50mm",
+			"sub_path": "filament/FELIXFood/Food Medium Stainless Steel Syringe @0.50mm.json"
+		},
+		{
+			"name": "Food Medium Stainless Steel Syringe @1.00mm",
+			"sub_path": "filament/FELIXFood/Food Medium Stainless Steel Syringe @1.00mm.json"
+		},
+		{
+			"name": "Food Medium Stainless Steel Syringe @2.00mm",
+			"sub_path": "filament/FELIXFood/Food Medium Stainless Steel Syringe @2.00mm.json"
+		},
+		{
+			"name": "Food Medium Stainless Steel Syringe @3.00mm",
+			"sub_path": "filament/FELIXFood/Food Medium Stainless Steel Syringe @3.00mm.json"
+		},
+		{
+			"name": "Food Medium Stainless Steel Syringe @4.00mm",
+			"sub_path": "filament/FELIXFood/Food Medium Stainless Steel Syringe @4.00mm.json"
+		},
+		{
+			"name": "Food Thick Stainless Steel Syringe @0.50mm",
+			"sub_path": "filament/FELIXFood/Food Thick Stainless Steel Syringe @0.50mm.json"
+		},
+		{
+			"name": "Food Thick Stainless Steel Syringe @1.00mm",
+			"sub_path": "filament/FELIXFood/Food Thick Stainless Steel Syringe @1.00mm.json"
+		},
+		{
+			"name": "Food Thick Stainless Steel Syringe @2.00mm",
+			"sub_path": "filament/FELIXFood/Food Thick Stainless Steel Syringe @2.00mm.json"
+		},
+		{
+			"name": "Food Thick Stainless Steel Syringe @3.00mm",
+			"sub_path": "filament/FELIXFood/Food Thick Stainless Steel Syringe @3.00mm.json"
+		},
+		{
+			"name": "Food Thick Stainless Steel Syringe @4.00mm",
+			"sub_path": "filament/FELIXFood/Food Thick Stainless Steel Syringe @4.00mm.json"
+		},
+		{
+			"name": "Food Thin Plastic Syringe @0.50mm",
+			"sub_path": "filament/FELIXFood/Food Thin Plastic Syringe @0.50mm.json"
+		},
+		{
+			"name": "Food Thin Plastic Syringe @1.00mm",
+			"sub_path": "filament/FELIXFood/Food Thin Plastic Syringe @1.00mm.json"
+		},
+		{
+			"name": "Food Thin Plastic Syringe @2.00mm",
+			"sub_path": "filament/FELIXFood/Food Thin Plastic Syringe @2.00mm.json"
+		},
+		{
+			"name": "Food Thin Plastic Syringe @3.00mm",
+			"sub_path": "filament/FELIXFood/Food Thin Plastic Syringe @3.00mm.json"
+		},
+		{
+			"name": "Food Thin Plastic Syringe @4.00mm",
+			"sub_path": "filament/FELIXFood/Food Thin Plastic Syringe @4.00mm.json"
+		},
+		{
+			"name": "Food Thin Stainless Steel Syringe @0.50mm",
+			"sub_path": "filament/FELIXFood/Food Thin Stainless Steel Syringe @0.50mm.json"
+		},
+		{
+			"name": "Food Thin Stainless Steel Syringe @1.00mm",
+			"sub_path": "filament/FELIXFood/Food Thin Stainless Steel Syringe @1.00mm.json"
+		},
+		{
+			"name": "Food Thin Stainless Steel Syringe @2.00mm",
+			"sub_path": "filament/FELIXFood/Food Thin Stainless Steel Syringe @2.00mm.json"
+		},
+		{
+			"name": "Food Thin Stainless Steel Syringe @3.00mm",
+			"sub_path": "filament/FELIXFood/Food Thin Stainless Steel Syringe @3.00mm.json"
+		},
+		{
+			"name": "Food Thin Stainless Steel Syringe @4.00mm",
+			"sub_path": "filament/FELIXFood/Food Thin Stainless Steel Syringe @4.00mm.json"
+		},
+		{
+			"name": "Food Very Thick Stainless Steel Syringe @1.00mm",
+			"sub_path": "filament/FELIXFood/Food Very Thick Stainless Steel Syringe @1.00mm.json"
+		},
+		{
+			"name": "Food Very Thick Stainless Steel Syringe @2.00mm",
+			"sub_path": "filament/FELIXFood/Food Very Thick Stainless Steel Syringe @2.00mm.json"
+		},
+		{
+			"name": "Food Very Thick Stainless Steel Syringe @3.00mm",
+			"sub_path": "filament/FELIXFood/Food Very Thick Stainless Steel Syringe @3.00mm.json"
+		},
+		{
+			"name": "Food Very Thick Stainless Steel Syringe @4.00mm",
+			"sub_path": "filament/FELIXFood/Food Very Thick Stainless Steel Syringe @4.00mm.json"
+		},
+		{
+			"name": "Food Very Thin Plastic Syringe @0.50mm",
+			"sub_path": "filament/FELIXFood/Food Very Thin Plastic Syringe @0.50mm.json"
+		},
+		{
+			"name": "Food Very Thin Plastic Syringe @1.00mm",
+			"sub_path": "filament/FELIXFood/Food Very Thin Plastic Syringe @1.00mm.json"
+		},
+		{
+			"name": "Food Very Thin Plastic Syringe @2.00mm",
+			"sub_path": "filament/FELIXFood/Food Very Thin Plastic Syringe @2.00mm.json"
+		},
+		{
+			"name": "Food Very Thin Plastic Syringe @3.00mm",
+			"sub_path": "filament/FELIXFood/Food Very Thin Plastic Syringe @3.00mm.json"
+		},
+		{
+			"name": "Food Very Thin Plastic Syringe @4.00mm",
+			"sub_path": "filament/FELIXFood/Food Very Thin Plastic Syringe @4.00mm.json"
+		},
+		{
+			"name": "Food Very Thin Stainless Steel  Syringe  @1.00mm",
+			"sub_path": "filament/FELIXFood/Food Very Thin Stainless Steel  Syringe  @1.00mm.json"
+		},
+		{
+			"name": "Food Very Thin Stainless Steel  Syringe  @2.00mm",
+			"sub_path": "filament/FELIXFood/Food Very Thin Stainless Steel  Syringe  @2.00mm.json"
+		},
+		{
+			"name": "Food Very Thin Stainless Steel  Syringe  @3.00mm",
+			"sub_path": "filament/FELIXFood/Food Very Thin Stainless Steel  Syringe  @3.00mm.json"
+		},
+		{
+			"name": "Food Very Thin Stainless Steel  Syringe  @4.00mm",
+			"sub_path": "filament/FELIXFood/Food Very Thin Stainless Steel  Syringe  @4.00mm.json"
+		},
+		{
+			"name": "Food Very Thin Stainless Steel Syringe @0.50mm",
+			"sub_path": "filament/FELIXFood/Food Very Thin Stainless Steel Syringe @0.50mm.json"
+		},
+		{
+			"name": "FORMFUTURA TitanX ABS Brass @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA TitanX ABS Brass @ 0.35mm.json"
+		},
+		{
+			"name": "FORMFUTURA TitanX ABS Brass @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA TitanX ABS Brass @ 0.50mm.json"
+		},
+		{
+			"name": "FORMFUTURA TitanX ABS Hardened Steel @ 0.25mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA TitanX ABS Hardened Steel @ 0.25mm.json"
+		},
+		{
+			"name": "FORMFUTURA TitanX ABS Hardened Steel @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA TitanX ABS Hardened Steel @ 0.35mm.json"
+		},
+		{
+			"name": "FORMFUTURA TitanX ABS Hardened Steel @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA TitanX ABS Hardened Steel @ 0.50mm.json"
+		},
+		{
+			"name": "FORMFUTURA TitanX ABS Hardened Steel @ 0.70mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA TitanX ABS Hardened Steel @ 0.70mm.json"
+		},
+		{
+			"name": "Ultrafuse ABS Fusion+ Brass @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/Ultrafuse ABS Fusion+ Brass @ 0.35mm.json"
+		},
+		{
+			"name": "Ultrafuse ABS Fusion+ Brass @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/Ultrafuse ABS Fusion+ Brass @ 0.50mm.json"
+		},
+		{
+			"name": "Ultrafuse ABS Fusion+ Hardened Steel @ 0.25mm",
+			"sub_path": "filament/FELIXPlastic/Ultrafuse ABS Fusion+ Hardened Steel @ 0.25mm.json"
+		},
+		{
+			"name": "Ultrafuse ABS Fusion+ Hardened Steel @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/Ultrafuse ABS Fusion+ Hardened Steel @ 0.35mm.json"
+		},
+		{
+			"name": "Ultrafuse ABS Fusion+ Hardened Steel @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/Ultrafuse ABS Fusion+ Hardened Steel @ 0.50mm.json"
+		},
+		{
+			"name": "Ultrafuse ABS Fusion+ Hardened Steel @ 0.70mm",
+			"sub_path": "filament/FELIXPlastic/Ultrafuse ABS Fusion+ Hardened Steel @ 0.70mm.json"
+		},
+		{
+			"name": "FORMFUTURA AppoloX ASA Brass @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA AppoloX ASA Brass @ 0.35mm.json"
+		},
+		{
+			"name": "FORMFUTURA AppoloX ASA Brass @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA AppoloX ASA Brass @ 0.50mm.json"
+		},
+		{
+			"name": "FORMFUTURA AppoloX ASA Hardened Steel @ 0.25mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA AppoloX ASA Hardened Steel @ 0.25mm.json"
+		},
+		{
+			"name": "FORMFUTURA AppoloX ASA Hardened Steel @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA AppoloX ASA Hardened Steel @ 0.35mm.json"
+		},
+		{
+			"name": "FORMFUTURA AppoloX ASA Hardened Steel @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA AppoloX ASA Hardened Steel @ 0.50mm.json"
+		},
+		{
+			"name": "FORMFUTURA AppoloX ASA Hardened Steel @ 0.70mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA AppoloX ASA Hardened Steel @ 0.70mm.json"
+		},
+		{
+			"name": "FELIX FLEX  Brass @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/FELIX FLEX  Brass @ 0.35mm.json"
+		},
+		{
+			"name": "FELIX FLEX  Brass @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/FELIX FLEX  Brass @ 0.50mm.json"
+		},
+		{
+			"name": "FELIX FLEX Hardened Steel @ 0.25mm",
+			"sub_path": "filament/FELIXPlastic/FELIX FLEX Hardened Steel @ 0.25mm.json"
+		},
+		{
+			"name": "FELIX FLEX Hardened Steel @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/FELIX FLEX Hardened Steel @ 0.35mm.json"
+		},
+		{
+			"name": "FELIX FLEX Hardened Steel @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/FELIX FLEX Hardened Steel @ 0.50mm.json"
+		},
+		{
+			"name": "FELIX FLEX Hardened Steel @ 0.70mm",
+			"sub_path": "filament/FELIXPlastic/FELIX FLEX Hardened Steel @ 0.70mm.json"
+		},
+		{
+			"name": "FELIX PETG Brass @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/FELIX PETG Brass @ 0.35mm.json"
+		},
+		{
+			"name": "FELIX PETG Brass @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/FELIX PETG Brass @ 0.50mm.json"
+		},
+		{
+			"name": "FELIX PETG Hardened Steel @ 0.25mm",
+			"sub_path": "filament/FELIXPlastic/FELIX PETG Hardened Steel @ 0.25mm.json"
+		},
+		{
+			"name": "FELIX PETG Hardened Steel @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/FELIX PETG Hardened Steel @ 0.35mm.json"
+		},
+		{
+			"name": "FELIX PETG Hardened Steel @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/FELIX PETG Hardened Steel @ 0.50mm.json"
+		},
+		{
+			"name": "FELIX PETG Hardened Steel @ 0.70mm",
+			"sub_path": "filament/FELIXPlastic/FELIX PETG Hardened Steel @ 0.70mm.json"
+		},
+		{
+			"name": "FELIX Premium PLA Brass @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/FELIX Premium PLA Brass @ 0.35mm.json"
+		},
+		{
+			"name": "FELIX Premium PLA Brass @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/FELIX Premium PLA Brass @ 0.50mm.json"
+		},
+		{
+			"name": "FELIX Premium PLA Hardened Steel @ 0.25mm",
+			"sub_path": "filament/FELIXPlastic/FELIX Premium PLA Hardened Steel @ 0.25mm.json"
+		},
+		{
+			"name": "FELIX Premium PLA Hardened Steel @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/FELIX Premium PLA Hardened Steel @ 0.35mm.json"
+		},
+		{
+			"name": "FELIX Premium PLA Hardened Steel @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/FELIX Premium PLA Hardened Steel @ 0.50mm.json"
+		},
+		{
+			"name": "FELIX Premium PLA Hardened Steel @ 0.70mm",
+			"sub_path": "filament/FELIXPlastic/FELIX Premium PLA Hardened Steel @ 0.70mm.json"
+		},
+		{
+			"name": "FELIX Wood  Brass @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/FELIX Wood  Brass @ 0.35mm.json"
+		},
+		{
+			"name": "FELIX Wood Brass @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/FELIX Wood Brass @ 0.50mm.json"
+		},
+		{
+			"name": "FELIX Wood Hardened Steel @ 0.25mm",
+			"sub_path": "filament/FELIXPlastic/FELIX Wood Hardened Steel @ 0.25mm.json"
+		},
+		{
+			"name": "FELIX Wood Hardened Steel @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/FELIX Wood Hardened Steel @ 0.35mm.json"
+		},
+		{
+			"name": "FELIX Wood Hardened Steel @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/FELIX Wood Hardened Steel @ 0.50mm.json"
+		},
+		{
+			"name": "FELIX Wood Hardened Steel @ 0.70mm",
+			"sub_path": "filament/FELIXPlastic/FELIX Wood Hardened Steel @ 0.70mm.json"
+		},
+		{
+			"name": "FORMFUTURA ePLA Brass @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA ePLA Brass @ 0.35mm.json"
+		},
+		{
+			"name": "FORMFUTURA ePLA Brass @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA ePLA Brass @ 0.50mm.json"
+		},
+		{
+			"name": "FORMFUTURA ePLA Hardened Steel @ 0.25mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA ePLA Hardened Steel @ 0.25mm.json"
+		},
+		{
+			"name": "FORMFUTURA ePLA Hardened Steel @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA ePLA Hardened Steel @ 0.35mm.json"
+		},
+		{
+			"name": "FORMFUTURA ePLA Hardened Steel @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA ePLA Hardened Steel @ 0.50mm.json"
+		},
+		{
+			"name": "FORMFUTURA ePLA Hardened Steel @ 0.70mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA ePLA Hardened Steel @ 0.70mm.json"
+		},
+		{
+			"name": "FORMFUTURA Aquasolve PVA Brass @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA Aquasolve PVA Brass @ 0.35mm.json"
+		},
+		{
+			"name": "FORMFUTURA Aquasolve PVA Brass @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA Aquasolve PVA Brass @ 0.50mm.json"
+		},
+		{
+			"name": "FORMFUTURA Aquasolve PVA Hardened Steel @ 0.25mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA Aquasolve PVA Hardened Steel @ 0.25mm.json"
+		},
+		{
+			"name": "FORMFUTURA Aquasolve PVA Hardened Steel @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA Aquasolve PVA Hardened Steel @ 0.35mm.json"
+		},
+		{
+			"name": "FORMFUTURA Aquasolve PVA Hardened Steel @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA Aquasolve PVA Hardened Steel @ 0.50mm.json"
+		},
+		{
+			"name": "FORMFUTURA Aquasolve PVA Hardened Steel @ 0.70mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA Aquasolve PVA Hardened Steel @ 0.70mm.json"
+		}
+	]
+}

resources/profiles/FELIX Printers/FELIX Build plate image.svg

@@ -0,0 +1,28 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<svg id="a" xmlns="http://www.w3.org/2000/svg" width="180.62mm" height="180.62mm" viewBox="0 0 512 512" xmlns:c2pa="http://c2pa.org/manifest">
+  <rect x="0" y="0" width="512" height="512" fill="none"/>
+  <g fill="#ffffff" transform="translate(5,460) scale(0.2)">
+    <g>
+      <path d="M139.4.8l-.2,62c-34.3,0-63.4,21.8-73.2,51.9C26.4,141,.2,187.8.2,241.3H0l.2-101.3C.2,63.1,62.4.8,139.4.8Z"/>
+      <path d="M139.1,92.5l-.8,62.5c-42.6,0-77.1,38.6-77.1,86.3l1-103.9c0-7.9,1.3-15.5,3.6-22.7,21.2-14.1,46.3-22.3,73.2-22.3Z"/>
+      <path d="M65.9,114.7c-2.3,7.2-3.6,14.8-3.6,22.7l-1,103.9H.2c0-53.5,26.3-100.3,65.7-126.6Z"/>
+    </g>
+    <polygon points="202.8 .4 202.8 92.9 226.2 92.9 226.2 56 259.8 56 259.8 36.1 226.2 36.1 226.2 19.4 265.7 19.4 265.7 0 202.8 .4"/>
+    <polygon points="282.3 -.3 282.3 93 346.1 93 346.1 72.4 306.8 72.4 306.8 55.6 341.7 55.6 341.7 36.4 306.5 36.4 306.5 19.6 346.2 19.6 346.2 -.3 282.3 -.3"/>
+    <polygon points="365.9 92.8 429.5 92.8 429.5 70.9 389.6 70.9 389.6 .2 365 .2 365.9 92.8"/>
+    <polygon points="448 0 471.9 0 471.9 92.5 447.5 92.5 448 0"/>
+    <path d="M485.1,92.5s34.7-44.3,33.4-46.5S485.7,0,485.7,0h29l18.4,24.8L550.1,0h26.6l-29.9,45.4,33.1,46.8h-28.8l-19.3-27.4-18.9,28.1-27.9-.4Z"/>
+    <g>
+      <path d="M210.9,154.1c-1.9,0-3.7-.2-5.3-.7-1.6-.4-3-1-4.2-1.6v-3.9c1.1.6,2.4,1.1,3.9,1.6,1.5.5,3.2.7,5.1.7,3.1,0,5.5-.6,7.2-1.7,1.7-1.2,2.5-2.8,2.5-5s-.8-3.9-2.5-5c-1.7-1.2-4.2-1.7-7.4-1.7h-3.9v-3.7h4c2.6,0,4.5-.5,5.9-1.5,1.4-1,2-2.4,2-4.2s-.3-2.3-1-3.1c-.6-.8-1.6-1.5-2.8-1.9-1.3-.4-2.8-.7-4.6-.7s-3,.2-4.3.6c-1.3.4-2.4.8-3.3,1.3v-3.9c1.1-.5,2.3-.9,3.6-1.3,1.3-.4,2.8-.5,4.5-.5s4,.3,5.5.8c1.5.5,2.7,1.3,3.6,2.2.9.9,1.6,1.9,2,3.1.4,1.1.6,2.3.6,3.4s-.2,2.4-.7,3.3c-.5.9-1,1.7-1.6,2.2-.6.6-1.4,1.1-2.3,1.6,1.3.7,2.3,1.4,3.2,2.1s1.6,1.7,2.2,2.8c.6,1.1,1,2.5,1,4.2s-.2,2.5-.7,3.8c-.5,1.2-1.2,2.4-2.2,3.4s-2.4,1.8-4,2.4c-1.7.6-3.7.9-6.1.9Z"/>
+      <path d="M232.1,153.7v-35.4h11.1c5.5,0,9.7,1.5,12.4,4.4,2.8,3,4.2,7.4,4.2,13.2s-1.4,10.3-4.2,13.2c-2.8,3-6.9,4.5-12.4,4.5h-11.1ZM235.9,150h7c4.5,0,7.8-1.1,9.9-3.4,2-2.3,3.1-5.8,3.1-10.7s-1-8.4-3.1-10.7c-2-2.3-5.3-3.4-9.9-3.4h-7v28.2Z"/>
+      <path d="M291.9,154.4c-.8,0-1.7-.1-2.6-.3-1-.2-1.9-.5-2.8-.8-.9-.3-1.7-.7-2.4-1l1.3-1.3v14.2h-3.8v-33.2c0-1.1.3-2,1-2.7.7-.7,1.6-1.2,2.7-1.6,1.1-.4,2.3-.6,3.5-.8,1.2-.2,2.4-.2,3.5-.2,2.1,0,4.1.4,6,1.3,1.9.9,3.4,2.4,4.6,4.5s1.7,5,1.7,8.6-.5,5.1-1.5,7.1c-1,2-2.4,3.5-4.3,4.6-1.9,1.1-4.2,1.6-6.9,1.6ZM291.9,150.9c1.9,0,3.5-.4,4.8-1.2,1.3-.8,2.2-2,2.8-3.5.6-1.5,1-3.2,1-5.1s-.2-3.7-.6-5.4c-.4-1.7-1.2-3-2.4-4-1.2-1-3-1.5-5.2-1.5s-3.4.2-4.8.6c-1.4.4-2,1-2,1.8v16.4c1.1.6,2.2,1.1,3.3,1.4s2.2.5,3.3.5Z"/>
+      <path d="M311.1,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1c-.8,0-1.6.2-2.4.3-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
+      <path d="M330.5,122.5v-4.2h4.2v4.2h-4.2ZM330.8,153.7v-26.4h3.8v26.4h-3.8Z"/>
+      <path d="M342.7,129.3c.8-.4,1.7-.8,2.6-1.1.9-.3,1.8-.6,2.8-.8.9-.2,1.9-.4,2.9-.5,1-.1,2-.2,2.9-.2,2.6,0,4.6.4,6.1,1.1,1.5.8,2.6,1.9,3.3,3.3.7,1.4,1,3.2,1,5.2v17.2h-3.8v-17.2c0-.6,0-1.3-.2-2-.2-.7-.5-1.4-.9-2-.5-.7-1.2-1.2-2.1-1.6s-2.2-.6-3.8-.6-2.2,0-3.4.3-2.4.4-3.6.8v22.4h-3.8v-24.3Z"/>
+      <path d="M380.7,154.1c-1.9,0-3.4-.6-4.7-1.7-1.3-1.1-1.9-2.9-1.9-5.1v-16.5h-4.6v-3.5h4.6v-7.5h3.8v7.5h6.8v3.5h-6.8v15.3c0,1.5.2,2.6.7,3.3s1.4,1.1,2.8,1.1,1.3,0,1.9-.2,1.1-.3,1.5-.5v3.6c-.5.2-1.1.3-1.9.5s-1.5.2-2.1.2Z"/>
+      <path d="M402,154.4c-2.5,0-4.7-.5-6.5-1.6-1.8-1-3.3-2.6-4.2-4.7-1-2.1-1.5-4.7-1.5-7.8,0-4.6,1-8,3.1-10.3,2.1-2.3,4.9-3.4,8.5-3.4s5.1.6,6.8,1.9c1.7,1.3,2.9,3,3.7,5.1.7,2.2,1.1,4.6,1.1,7.3h-21.3l.3-3.5h18.5l-1.5.5c-.1-2.6-.8-4.6-2-5.9-1.2-1.3-3.1-2-5.6-2s-3.2.3-4.3,1c-1.1.6-2,1.7-2.6,3.3s-.8,3.8-.8,6.6.8,5.7,2.3,7.3c1.5,1.7,3.6,2.5,6.3,2.5s2.5,0,3.6-.3,2.1-.5,3-.8c.9-.4,1.7-.7,2.4-1.2v3.9c-1.3.6-2.7,1.1-4.2,1.4-1.5.3-3.2.5-5.1.5Z"/>
+      <path d="M419.5,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1-1.6.2-2.4.3c-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
+      <path d="M446.4,154.4c-1.9,0-3.5-.2-4.8-.6s-2.6-.9-4-1.6v-4c1.1.6,2.1,1.1,2.9,1.5s1.7.7,2.6.9c.9.2,1.9.3,3,.3,1.8,0,3.2-.4,4.3-1.2,1.1-.8,1.7-1.8,1.7-3s-.3-1.7-.8-2.3-1.2-1-2.1-1.3c-.8-.4-1.7-.7-2.7-1.1-1-.3-2.1-.6-3.1-.9-1-.3-2-.8-2.9-1.3-.9-.5-1.6-1.3-2.1-2.1-.5-.9-.8-2-.8-3.4s.3-2.5.8-3.4c.5-1,1.3-1.7,2.1-2.4.9-.6,1.9-1.1,3-1.4,1.1-.3,2.2-.4,3.3-.4,1.6,0,2.9.2,4.1.6,1.1.4,2.3.9,3.5,1.4v3.8c-1.3-.7-2.5-1.3-3.6-1.7-1.1-.4-2.3-.7-3.8-.7s-2.7.3-3.9.9c-1.1.6-1.7,1.5-1.7,2.7s.3,1.8.9,2.4,1.4,1,2.3,1.4c1,.3,2,.7,3.1,1,.9.3,1.8.6,2.8.9,1,.3,1.8.8,2.7,1.3.8.5,1.5,1.3,2,2.1.5.9.8,2,.8,3.4s-.5,3.4-1.4,4.6-2.2,2.1-3.6,2.7c-1.5.6-3,.8-4.5.8Z"/>
+    </g>
+  </g>
+</svg>

resources/profiles/FELIX Printers/FELIX Food Series build plate texture.svg

@@ -0,0 +1,28 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<svg id="a" xmlns="http://www.w3.org/2000/svg" width="180.62mm" height="180.62mm" viewBox="0 0 250 195" xmlns:c2pa="http://c2pa.org/manifest">
+  <rect x="0" y="0" width="250" height="195" fill="none"/>
+  <g fill="#ffffff" transform="translate(2,169) scale(0.1)">
+    <g>
+      <path d="M139.4.8l-.2,62c-34.3,0-63.4,21.8-73.2,51.9C26.4,141,.2,187.8.2,241.3H0l.2-101.3C.2,63.1,62.4.8,139.4.8Z"/>
+      <path d="M139.1,92.5l-.8,62.5c-42.6,0-77.1,38.6-77.1,86.3l1-103.9c0-7.9,1.3-15.5,3.6-22.7,21.2-14.1,46.3-22.3,73.2-22.3Z"/>
+      <path d="M65.9,114.7c-2.3,7.2-3.6,14.8-3.6,22.7l-1,103.9H.2c0-53.5,26.3-100.3,65.7-126.6Z"/>
+    </g>
+    <polygon points="202.8 .4 202.8 92.9 226.2 92.9 226.2 56 259.8 56 259.8 36.1 226.2 36.1 226.2 19.4 265.7 19.4 265.7 0 202.8 .4"/>
+    <polygon points="282.3 -.3 282.3 93 346.1 93 346.1 72.4 306.8 72.4 306.8 55.6 341.7 55.6 341.7 36.4 306.5 36.4 306.5 19.6 346.2 19.6 346.2 -.3 282.3 -.3"/>
+    <polygon points="365.9 92.8 429.5 92.8 429.5 70.9 389.6 70.9 389.6 .2 365 .2 365.9 92.8"/>
+    <polygon points="448 0 471.9 0 471.9 92.5 447.5 92.5 448 0"/>
+    <path d="M485.1,92.5s34.7-44.3,33.4-46.5S485.7,0,485.7,0h29l18.4,24.8L550.1,0h26.6l-29.9,45.4,33.1,46.8h-28.8l-19.3-27.4-18.9,28.1-27.9-.4Z"/>
+    <g>
+      <path d="M210.9,154.1c-1.9,0-3.7-.2-5.3-.7-1.6-.4-3-1-4.2-1.6v-3.9c1.1.6,2.4,1.1,3.9,1.6,1.5.5,3.2.7,5.1.7,3.1,0,5.5-.6,7.2-1.7,1.7-1.2,2.5-2.8,2.5-5s-.8-3.9-2.5-5c-1.7-1.2-4.2-1.7-7.4-1.7h-3.9v-3.7h4c2.6,0,4.5-.5,5.9-1.5,1.4-1,2-2.4,2-4.2s-.3-2.3-1-3.1c-.6-.8-1.6-1.5-2.8-1.9-1.3-.4-2.8-.7-4.6-.7s-3,.2-4.3.6c-1.3.4-2.4.8-3.3,1.3v-3.9c1.1-.5,2.3-.9,3.6-1.3,1.3-.4,2.8-.5,4.5-.5s4,.3,5.5.8c1.5.5,2.7,1.3,3.6,2.2.9.9,1.6,1.9,2,3.1.4,1.1.6,2.3.6,3.4s-.2,2.4-.7,3.3c-.5.9-1,1.7-1.6,2.2-.6.6-1.4,1.1-2.3,1.6,1.3.7,2.3,1.4,3.2,2.1s1.6,1.7,2.2,2.8c.6,1.1,1,2.5,1,4.2s-.2,2.5-.7,3.8c-.5,1.2-1.2,2.4-2.2,3.4s-2.4,1.8-4,2.4c-1.7.6-3.7.9-6.1.9Z"/>
+      <path d="M232.1,153.7v-35.4h11.1c5.5,0,9.7,1.5,12.4,4.4,2.8,3,4.2,7.4,4.2,13.2s-1.4,10.3-4.2,13.2c-2.8,3-6.9,4.5-12.4,4.5h-11.1ZM235.9,150h7c4.5,0,7.8-1.1,9.9-3.4,2-2.3,3.1-5.8,3.1-10.7s-1-8.4-3.1-10.7c-2-2.3-5.3-3.4-9.9-3.4h-7v28.2Z"/>
+      <path d="M291.9,154.4c-.8,0-1.7-.1-2.6-.3-1-.2-1.9-.5-2.8-.8-.9-.3-1.7-.7-2.4-1l1.3-1.3v14.2h-3.8v-33.2c0-1.1.3-2,1-2.7.7-.7,1.6-1.2,2.7-1.6,1.1-.4,2.3-.6,3.5-.8,1.2-.2,2.4-.2,3.5-.2,2.1,0,4.1.4,6,1.3,1.9.9,3.4,2.4,4.6,4.5s1.7,5,1.7,8.6-.5,5.1-1.5,7.1c-1,2-2.4,3.5-4.3,4.6-1.9,1.1-4.2,1.6-6.9,1.6ZM291.9,150.9c1.9,0,3.5-.4,4.8-1.2,1.3-.8,2.2-2,2.8-3.5.6-1.5,1-3.2,1-5.1s-.2-3.7-.6-5.4c-.4-1.7-1.2-3-2.4-4-1.2-1-3-1.5-5.2-1.5s-3.4.2-4.8.6c-1.4.4-2,1-2,1.8v16.4c1.1.6,2.2,1.1,3.3,1.4s2.2.5,3.3.5Z"/>
+      <path d="M311.1,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1c-.8,0-1.6.2-2.4.3-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
+      <path d="M330.5,122.5v-4.2h4.2v4.2h-4.2ZM330.8,153.7v-26.4h3.8v26.4h-3.8Z"/>
+      <path d="M342.7,129.3c.8-.4,1.7-.8,2.6-1.1.9-.3,1.8-.6,2.8-.8.9-.2,1.9-.4,2.9-.5,1-.1,2-.2,2.9-.2,2.6,0,4.6.4,6.1,1.1,1.5.8,2.6,1.9,3.3,3.3.7,1.4,1,3.2,1,5.2v17.2h-3.8v-17.2c0-.6,0-1.3-.2-2-.2-.7-.5-1.4-.9-2-.5-.7-1.2-1.2-2.1-1.6s-2.2-.6-3.8-.6-2.2,0-3.4.3-2.4.4-3.6.8v22.4h-3.8v-24.3Z"/>
+      <path d="M380.7,154.1c-1.9,0-3.4-.6-4.7-1.7-1.3-1.1-1.9-2.9-1.9-5.1v-16.5h-4.6v-3.5h4.6v-7.5h3.8v7.5h6.8v3.5h-6.8v15.3c0,1.5.2,2.6.7,3.3s1.4,1.1,2.8,1.1,1.3,0,1.9-.2,1.1-.3,1.5-.5v3.6c-.5.2-1.1.3-1.9.5s-1.5.2-2.1.2Z"/>
+      <path d="M402,154.4c-2.5,0-4.7-.5-6.5-1.6-1.8-1-3.3-2.6-4.2-4.7-1-2.1-1.5-4.7-1.5-7.8,0-4.6,1-8,3.1-10.3,2.1-2.3,4.9-3.4,8.5-3.4s5.1.6,6.8,1.9c1.7,1.3,2.9,3,3.7,5.1.7,2.2,1.1,4.6,1.1,7.3h-21.3l.3-3.5h18.5l-1.5.5c-.1-2.6-.8-4.6-2-5.9-1.2-1.3-3.1-2-5.6-2s-3.2.3-4.3,1c-1.1.6-2,1.7-2.6,3.3s-.8,3.8-.8,6.6.8,5.7,2.3,7.3c1.5,1.7,3.6,2.5,6.3,2.5s2.5,0,3.6-.3,2.1-.5,3-.8c.9-.4,1.7-.7,2.4-1.2v3.9c-1.3.6-2.7,1.1-4.2,1.4-1.5.3-3.2.5-5.1.5Z"/>
+      <path d="M419.5,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1-1.6.2-2.4.3c-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
+      <path d="M446.4,154.4c-1.9,0-3.5-.2-4.8-.6s-2.6-.9-4-1.6v-4c1.1.6,2.1,1.1,2.9,1.5s1.7.7,2.6.9c.9.2,1.9.3,3,.3,1.8,0,3.2-.4,4.3-1.2,1.1-.8,1.7-1.8,1.7-3s-.3-1.7-.8-2.3-1.2-1-2.1-1.3c-.8-.4-1.7-.7-2.7-1.1-1-.3-2.1-.6-3.1-.9-1-.3-2-.8-2.9-1.3-.9-.5-1.6-1.3-2.1-2.1-.5-.9-.8-2-.8-3.4s.3-2.5.8-3.4c.5-1,1.3-1.7,2.1-2.4.9-.6,1.9-1.1,3-1.4,1.1-.3,2.2-.4,3.3-.4,1.6,0,2.9.2,4.1.6,1.1.4,2.3.9,3.5,1.4v3.8c-1.3-.7-2.5-1.3-3.6-1.7-1.1-.4-2.3-.7-3.8-.7s-2.7.3-3.9.9c-1.1.6-1.7,1.5-1.7,2.7s.3,1.8.9,2.4,1.4,1,2.3,1.4c1,.3,2,.7,3.1,1,.9.3,1.8.6,2.8.9,1,.3,1.8.8,2.7,1.3.8.5,1.5,1.3,2,2.1.5.9.8,2,.8,3.4s-.5,3.4-1.4,4.6-2.2,2.1-3.6,2.7c-1.5.6-3,.8-4.5.8Z"/>
+    </g>
+  </g>
+</svg>

resources/profiles/FELIX Printers/FELIX Pro L Series build plate texture.svg

@@ -0,0 +1,28 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<svg id="a" xmlns="http://www.w3.org/2000/svg" width="180.62mm" height="180.62mm" viewBox="0 0 300 400" xmlns:c2pa="http://c2pa.org/manifest">
+  <rect x="0" y="0" width="300" height="400" fill="none"/>
+  <g fill="#ffffff" transform="translate(3,365) scale(0.13)">
+    <g>
+      <path d="M139.4.8l-.2,62c-34.3,0-63.4,21.8-73.2,51.9C26.4,141,.2,187.8.2,241.3H0l.2-101.3C.2,63.1,62.4.8,139.4.8Z"/>
+      <path d="M139.1,92.5l-.8,62.5c-42.6,0-77.1,38.6-77.1,86.3l1-103.9c0-7.9,1.3-15.5,3.6-22.7,21.2-14.1,46.3-22.3,73.2-22.3Z"/>
+      <path d="M65.9,114.7c-2.3,7.2-3.6,14.8-3.6,22.7l-1,103.9H.2c0-53.5,26.3-100.3,65.7-126.6Z"/>
+    </g>
+    <polygon points="202.8 .4 202.8 92.9 226.2 92.9 226.2 56 259.8 56 259.8 36.1 226.2 36.1 226.2 19.4 265.7 19.4 265.7 0 202.8 .4"/>
+    <polygon points="282.3 -.3 282.3 93 346.1 93 346.1 72.4 306.8 72.4 306.8 55.6 341.7 55.6 341.7 36.4 306.5 36.4 306.5 19.6 346.2 19.6 346.2 -.3 282.3 -.3"/>
+    <polygon points="365.9 92.8 429.5 92.8 429.5 70.9 389.6 70.9 389.6 .2 365 .2 365.9 92.8"/>
+    <polygon points="448 0 471.9 0 471.9 92.5 447.5 92.5 448 0"/>
+    <path d="M485.1,92.5s34.7-44.3,33.4-46.5S485.7,0,485.7,0h29l18.4,24.8L550.1,0h26.6l-29.9,45.4,33.1,46.8h-28.8l-19.3-27.4-18.9,28.1-27.9-.4Z"/>
+    <g>
+      <path d="M210.9,154.1c-1.9,0-3.7-.2-5.3-.7-1.6-.4-3-1-4.2-1.6v-3.9c1.1.6,2.4,1.1,3.9,1.6,1.5.5,3.2.7,5.1.7,3.1,0,5.5-.6,7.2-1.7,1.7-1.2,2.5-2.8,2.5-5s-.8-3.9-2.5-5c-1.7-1.2-4.2-1.7-7.4-1.7h-3.9v-3.7h4c2.6,0,4.5-.5,5.9-1.5,1.4-1,2-2.4,2-4.2s-.3-2.3-1-3.1c-.6-.8-1.6-1.5-2.8-1.9-1.3-.4-2.8-.7-4.6-.7s-3,.2-4.3.6c-1.3.4-2.4.8-3.3,1.3v-3.9c1.1-.5,2.3-.9,3.6-1.3,1.3-.4,2.8-.5,4.5-.5s4,.3,5.5.8c1.5.5,2.7,1.3,3.6,2.2.9.9,1.6,1.9,2,3.1.4,1.1.6,2.3.6,3.4s-.2,2.4-.7,3.3c-.5.9-1,1.7-1.6,2.2-.6.6-1.4,1.1-2.3,1.6,1.3.7,2.3,1.4,3.2,2.1s1.6,1.7,2.2,2.8c.6,1.1,1,2.5,1,4.2s-.2,2.5-.7,3.8c-.5,1.2-1.2,2.4-2.2,3.4s-2.4,1.8-4,2.4c-1.7.6-3.7.9-6.1.9Z"/>
+      <path d="M232.1,153.7v-35.4h11.1c5.5,0,9.7,1.5,12.4,4.4,2.8,3,4.2,7.4,4.2,13.2s-1.4,10.3-4.2,13.2c-2.8,3-6.9,4.5-12.4,4.5h-11.1ZM235.9,150h7c4.5,0,7.8-1.1,9.9-3.4,2-2.3,3.1-5.8,3.1-10.7s-1-8.4-3.1-10.7c-2-2.3-5.3-3.4-9.9-3.4h-7v28.2Z"/>
+      <path d="M291.9,154.4c-.8,0-1.7-.1-2.6-.3-1-.2-1.9-.5-2.8-.8-.9-.3-1.7-.7-2.4-1l1.3-1.3v14.2h-3.8v-33.2c0-1.1.3-2,1-2.7.7-.7,1.6-1.2,2.7-1.6,1.1-.4,2.3-.6,3.5-.8,1.2-.2,2.4-.2,3.5-.2,2.1,0,4.1.4,6,1.3,1.9.9,3.4,2.4,4.6,4.5s1.7,5,1.7,8.6-.5,5.1-1.5,7.1c-1,2-2.4,3.5-4.3,4.6-1.9,1.1-4.2,1.6-6.9,1.6ZM291.9,150.9c1.9,0,3.5-.4,4.8-1.2,1.3-.8,2.2-2,2.8-3.5.6-1.5,1-3.2,1-5.1s-.2-3.7-.6-5.4c-.4-1.7-1.2-3-2.4-4-1.2-1-3-1.5-5.2-1.5s-3.4.2-4.8.6c-1.4.4-2,1-2,1.8v16.4c1.1.6,2.2,1.1,3.3,1.4s2.2.5,3.3.5Z"/>
+      <path d="M311.1,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1c-.8,0-1.6.2-2.4.3-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
+      <path d="M330.5,122.5v-4.2h4.2v4.2h-4.2ZM330.8,153.7v-26.4h3.8v26.4h-3.8Z"/>
+      <path d="M342.7,129.3c.8-.4,1.7-.8,2.6-1.1.9-.3,1.8-.6,2.8-.8.9-.2,1.9-.4,2.9-.5,1-.1,2-.2,2.9-.2,2.6,0,4.6.4,6.1,1.1,1.5.8,2.6,1.9,3.3,3.3.7,1.4,1,3.2,1,5.2v17.2h-3.8v-17.2c0-.6,0-1.3-.2-2-.2-.7-.5-1.4-.9-2-.5-.7-1.2-1.2-2.1-1.6s-2.2-.6-3.8-.6-2.2,0-3.4.3-2.4.4-3.6.8v22.4h-3.8v-24.3Z"/>
+      <path d="M380.7,154.1c-1.9,0-3.4-.6-4.7-1.7-1.3-1.1-1.9-2.9-1.9-5.1v-16.5h-4.6v-3.5h4.6v-7.5h3.8v7.5h6.8v3.5h-6.8v15.3c0,1.5.2,2.6.7,3.3s1.4,1.1,2.8,1.1,1.3,0,1.9-.2,1.1-.3,1.5-.5v3.6c-.5.2-1.1.3-1.9.5s-1.5.2-2.1.2Z"/>
+      <path d="M402,154.4c-2.5,0-4.7-.5-6.5-1.6-1.8-1-3.3-2.6-4.2-4.7-1-2.1-1.5-4.7-1.5-7.8,0-4.6,1-8,3.1-10.3,2.1-2.3,4.9-3.4,8.5-3.4s5.1.6,6.8,1.9c1.7,1.3,2.9,3,3.7,5.1.7,2.2,1.1,4.6,1.1,7.3h-21.3l.3-3.5h18.5l-1.5.5c-.1-2.6-.8-4.6-2-5.9-1.2-1.3-3.1-2-5.6-2s-3.2.3-4.3,1c-1.1.6-2,1.7-2.6,3.3s-.8,3.8-.8,6.6.8,5.7,2.3,7.3c1.5,1.7,3.6,2.5,6.3,2.5s2.5,0,3.6-.3,2.1-.5,3-.8c.9-.4,1.7-.7,2.4-1.2v3.9c-1.3.6-2.7,1.1-4.2,1.4-1.5.3-3.2.5-5.1.5Z"/>
+      <path d="M419.5,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1-1.6.2-2.4.3c-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
+      <path d="M446.4,154.4c-1.9,0-3.5-.2-4.8-.6s-2.6-.9-4-1.6v-4c1.1.6,2.1,1.1,2.9,1.5s1.7.7,2.6.9c.9.2,1.9.3,3,.3,1.8,0,3.2-.4,4.3-1.2,1.1-.8,1.7-1.8,1.7-3s-.3-1.7-.8-2.3-1.2-1-2.1-1.3c-.8-.4-1.7-.7-2.7-1.1-1-.3-2.1-.6-3.1-.9-1-.3-2-.8-2.9-1.3-.9-.5-1.6-1.3-2.1-2.1-.5-.9-.8-2-.8-3.4s.3-2.5.8-3.4c.5-1,1.3-1.7,2.1-2.4.9-.6,1.9-1.1,3-1.4,1.1-.3,2.2-.4,3.3-.4,1.6,0,2.9.2,4.1.6,1.1.4,2.3.9,3.5,1.4v3.8c-1.3-.7-2.5-1.3-3.6-1.7-1.1-.4-2.3-.7-3.8-.7s-2.7.3-3.9.9c-1.1.6-1.7,1.5-1.7,2.7s.3,1.8.9,2.4,1.4,1,2.3,1.4c1,.3,2,.7,3.1,1,.9.3,1.8.6,2.8.9,1,.3,1.8.8,2.7,1.3.8.5,1.5,1.3,2,2.1.5.9.8,2,.8,3.4s-.5,3.4-1.4,4.6-2.2,2.1-3.6,2.7c-1.5.6-3,.8-4.5.8Z"/>
+    </g>
+  </g>
+</svg>

resources/profiles/FELIX Printers/FELIX Pro Series build plate texture.svg

@@ -0,0 +1,28 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<svg id="a" xmlns="http://www.w3.org/2000/svg" width="180.62mm" height="180.62mm" viewBox="0 0 235 244" xmlns:c2pa="http://c2pa.org/manifest">
+  <rect x="0" y="0" width="235" height="244" fill="none"/>
+  <g fill="#ffffff" transform="translate(2,215) scale(0.1)">
+    <g>
+      <path d="M139.4.8l-.2,62c-34.3,0-63.4,21.8-73.2,51.9C26.4,141,.2,187.8.2,241.3H0l.2-101.3C.2,63.1,62.4.8,139.4.8Z"/>
+      <path d="M139.1,92.5l-.8,62.5c-42.6,0-77.1,38.6-77.1,86.3l1-103.9c0-7.9,1.3-15.5,3.6-22.7,21.2-14.1,46.3-22.3,73.2-22.3Z"/>
+      <path d="M65.9,114.7c-2.3,7.2-3.6,14.8-3.6,22.7l-1,103.9H.2c0-53.5,26.3-100.3,65.7-126.6Z"/>
+    </g>
+    <polygon points="202.8 .4 202.8 92.9 226.2 92.9 226.2 56 259.8 56 259.8 36.1 226.2 36.1 226.2 19.4 265.7 19.4 265.7 0 202.8 .4"/>
+    <polygon points="282.3 -.3 282.3 93 346.1 93 346.1 72.4 306.8 72.4 306.8 55.6 341.7 55.6 341.7 36.4 306.5 36.4 306.5 19.6 346.2 19.6 346.2 -.3 282.3 -.3"/>
+    <polygon points="365.9 92.8 429.5 92.8 429.5 70.9 389.6 70.9 389.6 .2 365 .2 365.9 92.8"/>
+    <polygon points="448 0 471.9 0 471.9 92.5 447.5 92.5 448 0"/>
+    <path d="M485.1,92.5s34.7-44.3,33.4-46.5S485.7,0,485.7,0h29l18.4,24.8L550.1,0h26.6l-29.9,45.4,33.1,46.8h-28.8l-19.3-27.4-18.9,28.1-27.9-.4Z"/>
+    <g>
+      <path d="M210.9,154.1c-1.9,0-3.7-.2-5.3-.7-1.6-.4-3-1-4.2-1.6v-3.9c1.1.6,2.4,1.1,3.9,1.6,1.5.5,3.2.7,5.1.7,3.1,0,5.5-.6,7.2-1.7,1.7-1.2,2.5-2.8,2.5-5s-.8-3.9-2.5-5c-1.7-1.2-4.2-1.7-7.4-1.7h-3.9v-3.7h4c2.6,0,4.5-.5,5.9-1.5,1.4-1,2-2.4,2-4.2s-.3-2.3-1-3.1c-.6-.8-1.6-1.5-2.8-1.9-1.3-.4-2.8-.7-4.6-.7s-3,.2-4.3.6c-1.3.4-2.4.8-3.3,1.3v-3.9c1.1-.5,2.3-.9,3.6-1.3,1.3-.4,2.8-.5,4.5-.5s4,.3,5.5.8c1.5.5,2.7,1.3,3.6,2.2.9.9,1.6,1.9,2,3.1.4,1.1.6,2.3.6,3.4s-.2,2.4-.7,3.3c-.5.9-1,1.7-1.6,2.2-.6.6-1.4,1.1-2.3,1.6,1.3.7,2.3,1.4,3.2,2.1s1.6,1.7,2.2,2.8c.6,1.1,1,2.5,1,4.2s-.2,2.5-.7,3.8c-.5,1.2-1.2,2.4-2.2,3.4s-2.4,1.8-4,2.4c-1.7.6-3.7.9-6.1.9Z"/>
+      <path d="M232.1,153.7v-35.4h11.1c5.5,0,9.7,1.5,12.4,4.4,2.8,3,4.2,7.4,4.2,13.2s-1.4,10.3-4.2,13.2c-2.8,3-6.9,4.5-12.4,4.5h-11.1ZM235.9,150h7c4.5,0,7.8-1.1,9.9-3.4,2-2.3,3.1-5.8,3.1-10.7s-1-8.4-3.1-10.7c-2-2.3-5.3-3.4-9.9-3.4h-7v28.2Z"/>
+      <path d="M291.9,154.4c-.8,0-1.7-.1-2.6-.3-1-.2-1.9-.5-2.8-.8-.9-.3-1.7-.7-2.4-1l1.3-1.3v14.2h-3.8v-33.2c0-1.1.3-2,1-2.7.7-.7,1.6-1.2,2.7-1.6,1.1-.4,2.3-.6,3.5-.8,1.2-.2,2.4-.2,3.5-.2,2.1,0,4.1.4,6,1.3,1.9.9,3.4,2.4,4.6,4.5s1.7,5,1.7,8.6-.5,5.1-1.5,7.1c-1,2-2.4,3.5-4.3,4.6-1.9,1.1-4.2,1.6-6.9,1.6ZM291.9,150.9c1.9,0,3.5-.4,4.8-1.2,1.3-.8,2.2-2,2.8-3.5.6-1.5,1-3.2,1-5.1s-.2-3.7-.6-5.4c-.4-1.7-1.2-3-2.4-4-1.2-1-3-1.5-5.2-1.5s-3.4.2-4.8.6c-1.4.4-2,1-2,1.8v16.4c1.1.6,2.2,1.1,3.3,1.4s2.2.5,3.3.5Z"/>
+      <path d="M311.1,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1c-.8,0-1.6.2-2.4.3-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
+      <path d="M330.5,122.5v-4.2h4.2v4.2h-4.2ZM330.8,153.7v-26.4h3.8v26.4h-3.8Z"/>
+      <path d="M342.7,129.3c.8-.4,1.7-.8,2.6-1.1.9-.3,1.8-.6,2.8-.8.9-.2,1.9-.4,2.9-.5,1-.1,2-.2,2.9-.2,2.6,0,4.6.4,6.1,1.1,1.5.8,2.6,1.9,3.3,3.3.7,1.4,1,3.2,1,5.2v17.2h-3.8v-17.2c0-.6,0-1.3-.2-2-.2-.7-.5-1.4-.9-2-.5-.7-1.2-1.2-2.1-1.6s-2.2-.6-3.8-.6-2.2,0-3.4.3-2.4.4-3.6.8v22.4h-3.8v-24.3Z"/>
+      <path d="M380.7,154.1c-1.9,0-3.4-.6-4.7-1.7-1.3-1.1-1.9-2.9-1.9-5.1v-16.5h-4.6v-3.5h4.6v-7.5h3.8v7.5h6.8v3.5h-6.8v15.3c0,1.5.2,2.6.7,3.3s1.4,1.1,2.8,1.1,1.3,0,1.9-.2,1.1-.3,1.5-.5v3.6c-.5.2-1.1.3-1.9.5s-1.5.2-2.1.2Z"/>
+      <path d="M402,154.4c-2.5,0-4.7-.5-6.5-1.6-1.8-1-3.3-2.6-4.2-4.7-1-2.1-1.5-4.7-1.5-7.8,0-4.6,1-8,3.1-10.3,2.1-2.3,4.9-3.4,8.5-3.4s5.1.6,6.8,1.9c1.7,1.3,2.9,3,3.7,5.1.7,2.2,1.1,4.6,1.1,7.3h-21.3l.3-3.5h18.5l-1.5.5c-.1-2.6-.8-4.6-2-5.9-1.2-1.3-3.1-2-5.6-2s-3.2.3-4.3,1c-1.1.6-2,1.7-2.6,3.3s-.8,3.8-.8,6.6.8,5.7,2.3,7.3c1.5,1.7,3.6,2.5,6.3,2.5s2.5,0,3.6-.3,2.1-.5,3-.8c.9-.4,1.7-.7,2.4-1.2v3.9c-1.3.6-2.7,1.1-4.2,1.4-1.5.3-3.2.5-5.1.5Z"/>
+      <path d="M419.5,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1-1.6.2-2.4.3c-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
+      <path d="M446.4,154.4c-1.9,0-3.5-.2-4.8-.6s-2.6-.9-4-1.6v-4c1.1.6,2.1,1.1,2.9,1.5s1.7.7,2.6.9c.9.2,1.9.3,3,.3,1.8,0,3.2-.4,4.3-1.2,1.1-.8,1.7-1.8,1.7-3s-.3-1.7-.8-2.3-1.2-1-2.1-1.3c-.8-.4-1.7-.7-2.7-1.1-1-.3-2.1-.6-3.1-.9-1-.3-2-.8-2.9-1.3-.9-.5-1.6-1.3-2.1-2.1-.5-.9-.8-2-.8-3.4s.3-2.5.8-3.4c.5-1,1.3-1.7,2.1-2.4.9-.6,1.9-1.1,3-1.4,1.1-.3,2.2-.4,3.3-.4,1.6,0,2.9.2,4.1.6,1.1.4,2.3.9,3.5,1.4v3.8c-1.3-.7-2.5-1.3-3.6-1.7-1.1-.4-2.3-.7-3.8-.7s-2.7.3-3.9.9c-1.1.6-1.7,1.5-1.7,2.7s.3,1.8.9,2.4,1.4,1,2.3,1.4c1,.3,2,.7,3.1,1,.9.3,1.8.6,2.8.9,1,.3,1.8.8,2.7,1.3.8.5,1.5,1.3,2,2.1.5.9.8,2,.8,3.4s-.5,3.4-1.4,4.6-2.2,2.1-3.6,2.7c-1.5.6-3,.8-4.5.8Z"/>
+    </g>
+  </g>
+</svg>

resources/profiles/FELIX Printers/FELIX Pro XL Series build plate.svg

@@ -0,0 +1,28 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<svg id="a" xmlns="http://www.w3.org/2000/svg" width="180.62mm" height="180.62mm" viewBox="0 0 600 400" xmlns:c2pa="http://c2pa.org/manifest">
+  <rect x="0" y="0" width="600" height="400" fill="none"/>
+  <g fill="#ffffff" transform="translate(4,357) scale(0.16)">
+    <g>
+      <path d="M139.4.8l-.2,62c-34.3,0-63.4,21.8-73.2,51.9C26.4,141,.2,187.8.2,241.3H0l.2-101.3C.2,63.1,62.4.8,139.4.8Z"/>
+      <path d="M139.1,92.5l-.8,62.5c-42.6,0-77.1,38.6-77.1,86.3l1-103.9c0-7.9,1.3-15.5,3.6-22.7,21.2-14.1,46.3-22.3,73.2-22.3Z"/>
+      <path d="M65.9,114.7c-2.3,7.2-3.6,14.8-3.6,22.7l-1,103.9H.2c0-53.5,26.3-100.3,65.7-126.6Z"/>
+    </g>
+    <polygon points="202.8 .4 202.8 92.9 226.2 92.9 226.2 56 259.8 56 259.8 36.1 226.2 36.1 226.2 19.4 265.7 19.4 265.7 0 202.8 .4"/>
+    <polygon points="282.3 -.3 282.3 93 346.1 93 346.1 72.4 306.8 72.4 306.8 55.6 341.7 55.6 341.7 36.4 306.5 36.4 306.5 19.6 346.2 19.6 346.2 -.3 282.3 -.3"/>
+    <polygon points="365.9 92.8 429.5 92.8 429.5 70.9 389.6 70.9 389.6 .2 365 .2 365.9 92.8"/>
+    <polygon points="448 0 471.9 0 471.9 92.5 447.5 92.5 448 0"/>
+    <path d="M485.1,92.5s34.7-44.3,33.4-46.5S485.7,0,485.7,0h29l18.4,24.8L550.1,0h26.6l-29.9,45.4,33.1,46.8h-28.8l-19.3-27.4-18.9,28.1-27.9-.4Z"/>
+    <g>
+      <path d="M210.9,154.1c-1.9,0-3.7-.2-5.3-.7-1.6-.4-3-1-4.2-1.6v-3.9c1.1.6,2.4,1.1,3.9,1.6,1.5.5,3.2.7,5.1.7,3.1,0,5.5-.6,7.2-1.7,1.7-1.2,2.5-2.8,2.5-5s-.8-3.9-2.5-5c-1.7-1.2-4.2-1.7-7.4-1.7h-3.9v-3.7h4c2.6,0,4.5-.5,5.9-1.5,1.4-1,2-2.4,2-4.2s-.3-2.3-1-3.1c-.6-.8-1.6-1.5-2.8-1.9-1.3-.4-2.8-.7-4.6-.7s-3,.2-4.3.6c-1.3.4-2.4.8-3.3,1.3v-3.9c1.1-.5,2.3-.9,3.6-1.3,1.3-.4,2.8-.5,4.5-.5s4,.3,5.5.8c1.5.5,2.7,1.3,3.6,2.2.9.9,1.6,1.9,2,3.1.4,1.1.6,2.3.6,3.4s-.2,2.4-.7,3.3c-.5.9-1,1.7-1.6,2.2-.6.6-1.4,1.1-2.3,1.6,1.3.7,2.3,1.4,3.2,2.1s1.6,1.7,2.2,2.8c.6,1.1,1,2.5,1,4.2s-.2,2.5-.7,3.8c-.5,1.2-1.2,2.4-2.2,3.4s-2.4,1.8-4,2.4c-1.7.6-3.7.9-6.1.9Z"/>
+      <path d="M232.1,153.7v-35.4h11.1c5.5,0,9.7,1.5,12.4,4.4,2.8,3,4.2,7.4,4.2,13.2s-1.4,10.3-4.2,13.2c-2.8,3-6.9,4.5-12.4,4.5h-11.1ZM235.9,150h7c4.5,0,7.8-1.1,9.9-3.4,2-2.3,3.1-5.8,3.1-10.7s-1-8.4-3.1-10.7c-2-2.3-5.3-3.4-9.9-3.4h-7v28.2Z"/>
+      <path d="M291.9,154.4c-.8,0-1.7-.1-2.6-.3-1-.2-1.9-.5-2.8-.8-.9-.3-1.7-.7-2.4-1l1.3-1.3v14.2h-3.8v-33.2c0-1.1.3-2,1-2.7.7-.7,1.6-1.2,2.7-1.6,1.1-.4,2.3-.6,3.5-.8,1.2-.2,2.4-.2,3.5-.2,2.1,0,4.1.4,6,1.3,1.9.9,3.4,2.4,4.6,4.5s1.7,5,1.7,8.6-.5,5.1-1.5,7.1c-1,2-2.4,3.5-4.3,4.6-1.9,1.1-4.2,1.6-6.9,1.6ZM291.9,150.9c1.9,0,3.5-.4,4.8-1.2,1.3-.8,2.2-2,2.8-3.5.6-1.5,1-3.2,1-5.1s-.2-3.7-.6-5.4c-.4-1.7-1.2-3-2.4-4-1.2-1-3-1.5-5.2-1.5s-3.4.2-4.8.6c-1.4.4-2,1-2,1.8v16.4c1.1.6,2.2,1.1,3.3,1.4s2.2.5,3.3.5Z"/>
+      <path d="M311.1,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1c-.8,0-1.6.2-2.4.3-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
+      <path d="M330.5,122.5v-4.2h4.2v4.2h-4.2ZM330.8,153.7v-26.4h3.8v26.4h-3.8Z"/>
+      <path d="M342.7,129.3c.8-.4,1.7-.8,2.6-1.1.9-.3,1.8-.6,2.8-.8.9-.2,1.9-.4,2.9-.5,1-.1,2-.2,2.9-.2,2.6,0,4.6.4,6.1,1.1,1.5.8,2.6,1.9,3.3,3.3.7,1.4,1,3.2,1,5.2v17.2h-3.8v-17.2c0-.6,0-1.3-.2-2-.2-.7-.5-1.4-.9-2-.5-.7-1.2-1.2-2.1-1.6s-2.2-.6-3.8-.6-2.2,0-3.4.3-2.4.4-3.6.8v22.4h-3.8v-24.3Z"/>
+      <path d="M380.7,154.1c-1.9,0-3.4-.6-4.7-1.7-1.3-1.1-1.9-2.9-1.9-5.1v-16.5h-4.6v-3.5h4.6v-7.5h3.8v7.5h6.8v3.5h-6.8v15.3c0,1.5.2,2.6.7,3.3s1.4,1.1,2.8,1.1,1.3,0,1.9-.2,1.1-.3,1.5-.5v3.6c-.5.2-1.1.3-1.9.5s-1.5.2-2.1.2Z"/>
+      <path d="M402,154.4c-2.5,0-4.7-.5-6.5-1.6-1.8-1-3.3-2.6-4.2-4.7-1-2.1-1.5-4.7-1.5-7.8,0-4.6,1-8,3.1-10.3,2.1-2.3,4.9-3.4,8.5-3.4s5.1.6,6.8,1.9c1.7,1.3,2.9,3,3.7,5.1.7,2.2,1.1,4.6,1.1,7.3h-21.3l.3-3.5h18.5l-1.5.5c-.1-2.6-.8-4.6-2-5.9-1.2-1.3-3.1-2-5.6-2s-3.2.3-4.3,1c-1.1.6-2,1.7-2.6,3.3s-.8,3.8-.8,6.6.8,5.7,2.3,7.3c1.5,1.7,3.6,2.5,6.3,2.5s2.5,0,3.6-.3,2.1-.5,3-.8c.9-.4,1.7-.7,2.4-1.2v3.9c-1.3.6-2.7,1.1-4.2,1.4-1.5.3-3.2.5-5.1.5Z"/>
+      <path d="M419.5,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1-1.6.2-2.4.3c-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
+      <path d="M446.4,154.4c-1.9,0-3.5-.2-4.8-.6s-2.6-.9-4-1.6v-4c1.1.6,2.1,1.1,2.9,1.5s1.7.7,2.6.9c.9.2,1.9.3,3,.3,1.8,0,3.2-.4,4.3-1.2,1.1-.8,1.7-1.8,1.7-3s-.3-1.7-.8-2.3-1.2-1-2.1-1.3c-.8-.4-1.7-.7-2.7-1.1-1-.3-2.1-.6-3.1-.9-1-.3-2-.8-2.9-1.3-.9-.5-1.6-1.3-2.1-2.1-.5-.9-.8-2-.8-3.4s.3-2.5.8-3.4c.5-1,1.3-1.7,2.1-2.4.9-.6,1.9-1.1,3-1.4,1.1-.3,2.2-.4,3.3-.4,1.6,0,2.9.2,4.1.6,1.1.4,2.3.9,3.5,1.4v3.8c-1.3-.7-2.5-1.3-3.6-1.7-1.1-.4-2.3-.7-3.8-.7s-2.7.3-3.9.9c-1.1.6-1.7,1.5-1.7,2.7s.3,1.8.9,2.4,1.4,1,2.3,1.4c1,.3,2,.7,3.1,1,.9.3,1.8.6,2.8.9,1,.3,1.8.8,2.7,1.3.8.5,1.5,1.3,2,2.1.5.9.8,2,.8,3.4s-.5,3.4-1.4,4.6-2.2,2.1-3.6,2.7c-1.5.6-3,.8-4.5.8Z"/>
+    </g>
+  </g>
+</svg>

resources/profiles/FELIX Printers/FELIX Tec 4 Series build plate.svg

@@ -0,0 +1,28 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<svg id="a" xmlns="http://www.w3.org/2000/svg" width="180.62mm" height="180.62mm" viewBox="0 0 205 255" xmlns:c2pa="http://c2pa.org/manifest">
+  <rect x="0" y="0" width="205" height="255" fill="none"/>
+  <g fill="#ffffff" transform="translate(3,228) scale(0.1)">
+    <g>
+      <path d="M139.4.8l-.2,62c-34.3,0-63.4,21.8-73.2,51.9C26.4,141,.2,187.8.2,241.3H0l.2-101.3C.2,63.1,62.4.8,139.4.8Z"/>
+      <path d="M139.1,92.5l-.8,62.5c-42.6,0-77.1,38.6-77.1,86.3l1-103.9c0-7.9,1.3-15.5,3.6-22.7,21.2-14.1,46.3-22.3,73.2-22.3Z"/>
+      <path d="M65.9,114.7c-2.3,7.2-3.6,14.8-3.6,22.7l-1,103.9H.2c0-53.5,26.3-100.3,65.7-126.6Z"/>
+    </g>
+    <polygon points="202.8 .4 202.8 92.9 226.2 92.9 226.2 56 259.8 56 259.8 36.1 226.2 36.1 226.2 19.4 265.7 19.4 265.7 0 202.8 .4"/>
+    <polygon points="282.3 -.3 282.3 93 346.1 93 346.1 72.4 306.8 72.4 306.8 55.6 341.7 55.6 341.7 36.4 306.5 36.4 306.5 19.6 346.2 19.6 346.2 -.3 282.3 -.3"/>
+    <polygon points="365.9 92.8 429.5 92.8 429.5 70.9 389.6 70.9 389.6 .2 365 .2 365.9 92.8"/>
+    <polygon points="448 0 471.9 0 471.9 92.5 447.5 92.5 448 0"/>
+    <path d="M485.1,92.5s34.7-44.3,33.4-46.5S485.7,0,485.7,0h29l18.4,24.8L550.1,0h26.6l-29.9,45.4,33.1,46.8h-28.8l-19.3-27.4-18.9,28.1-27.9-.4Z"/>
+    <g>
+      <path d="M210.9,154.1c-1.9,0-3.7-.2-5.3-.7-1.6-.4-3-1-4.2-1.6v-3.9c1.1.6,2.4,1.1,3.9,1.6,1.5.5,3.2.7,5.1.7,3.1,0,5.5-.6,7.2-1.7,1.7-1.2,2.5-2.8,2.5-5s-.8-3.9-2.5-5c-1.7-1.2-4.2-1.7-7.4-1.7h-3.9v-3.7h4c2.6,0,4.5-.5,5.9-1.5,1.4-1,2-2.4,2-4.2s-.3-2.3-1-3.1c-.6-.8-1.6-1.5-2.8-1.9-1.3-.4-2.8-.7-4.6-.7s-3,.2-4.3.6c-1.3.4-2.4.8-3.3,1.3v-3.9c1.1-.5,2.3-.9,3.6-1.3,1.3-.4,2.8-.5,4.5-.5s4,.3,5.5.8c1.5.5,2.7,1.3,3.6,2.2.9.9,1.6,1.9,2,3.1.4,1.1.6,2.3.6,3.4s-.2,2.4-.7,3.3c-.5.9-1,1.7-1.6,2.2-.6.6-1.4,1.1-2.3,1.6,1.3.7,2.3,1.4,3.2,2.1s1.6,1.7,2.2,2.8c.6,1.1,1,2.5,1,4.2s-.2,2.5-.7,3.8c-.5,1.2-1.2,2.4-2.2,3.4s-2.4,1.8-4,2.4c-1.7.6-3.7.9-6.1.9Z"/>
+      <path d="M232.1,153.7v-35.4h11.1c5.5,0,9.7,1.5,12.4,4.4,2.8,3,4.2,7.4,4.2,13.2s-1.4,10.3-4.2,13.2c-2.8,3-6.9,4.5-12.4,4.5h-11.1ZM235.9,150h7c4.5,0,7.8-1.1,9.9-3.4,2-2.3,3.1-5.8,3.1-10.7s-1-8.4-3.1-10.7c-2-2.3-5.3-3.4-9.9-3.4h-7v28.2Z"/>
+      <path d="M291.9,154.4c-.8,0-1.7-.1-2.6-.3-1-.2-1.9-.5-2.8-.8-.9-.3-1.7-.7-2.4-1l1.3-1.3v14.2h-3.8v-33.2c0-1.1.3-2,1-2.7.7-.7,1.6-1.2,2.7-1.6,1.1-.4,2.3-.6,3.5-.8,1.2-.2,2.4-.2,3.5-.2,2.1,0,4.1.4,6,1.3,1.9.9,3.4,2.4,4.6,4.5s1.7,5,1.7,8.6-.5,5.1-1.5,7.1c-1,2-2.4,3.5-4.3,4.6-1.9,1.1-4.2,1.6-6.9,1.6ZM291.9,150.9c1.9,0,3.5-.4,4.8-1.2,1.3-.8,2.2-2,2.8-3.5.6-1.5,1-3.2,1-5.1s-.2-3.7-.6-5.4c-.4-1.7-1.2-3-2.4-4-1.2-1-3-1.5-5.2-1.5s-3.4.2-4.8.6c-1.4.4-2,1-2,1.8v16.4c1.1.6,2.2,1.1,3.3,1.4s2.2.5,3.3.5Z"/>
+      <path d="M311.1,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1c-.8,0-1.6.2-2.4.3-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
+      <path d="M330.5,122.5v-4.2h4.2v4.2h-4.2ZM330.8,153.7v-26.4h3.8v26.4h-3.8Z"/>
+      <path d="M342.7,129.3c.8-.4,1.7-.8,2.6-1.1.9-.3,1.8-.6,2.8-.8.9-.2,1.9-.4,2.9-.5,1-.1,2-.2,2.9-.2,2.6,0,4.6.4,6.1,1.1,1.5.8,2.6,1.9,3.3,3.3.7,1.4,1,3.2,1,5.2v17.2h-3.8v-17.2c0-.6,0-1.3-.2-2-.2-.7-.5-1.4-.9-2-.5-.7-1.2-1.2-2.1-1.6s-2.2-.6-3.8-.6-2.2,0-3.4.3-2.4.4-3.6.8v22.4h-3.8v-24.3Z"/>
+      <path d="M380.7,154.1c-1.9,0-3.4-.6-4.7-1.7-1.3-1.1-1.9-2.9-1.9-5.1v-16.5h-4.6v-3.5h4.6v-7.5h3.8v7.5h6.8v3.5h-6.8v15.3c0,1.5.2,2.6.7,3.3s1.4,1.1,2.8,1.1,1.3,0,1.9-.2,1.1-.3,1.5-.5v3.6c-.5.2-1.1.3-1.9.5s-1.5.2-2.1.2Z"/>
+      <path d="M402,154.4c-2.5,0-4.7-.5-6.5-1.6-1.8-1-3.3-2.6-4.2-4.7-1-2.1-1.5-4.7-1.5-7.8,0-4.6,1-8,3.1-10.3,2.1-2.3,4.9-3.4,8.5-3.4s5.1.6,6.8,1.9c1.7,1.3,2.9,3,3.7,5.1.7,2.2,1.1,4.6,1.1,7.3h-21.3l.3-3.5h18.5l-1.5.5c-.1-2.6-.8-4.6-2-5.9-1.2-1.3-3.1-2-5.6-2s-3.2.3-4.3,1c-1.1.6-2,1.7-2.6,3.3s-.8,3.8-.8,6.6.8,5.7,2.3,7.3c1.5,1.7,3.6,2.5,6.3,2.5s2.5,0,3.6-.3,2.1-.5,3-.8c.9-.4,1.7-.7,2.4-1.2v3.9c-1.3.6-2.7,1.1-4.2,1.4-1.5.3-3.2.5-5.1.5Z"/>
+      <path d="M419.5,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1-1.6.2-2.4.3c-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
+      <path d="M446.4,154.4c-1.9,0-3.5-.2-4.8-.6s-2.6-.9-4-1.6v-4c1.1.6,2.1,1.1,2.9,1.5s1.7.7,2.6.9c.9.2,1.9.3,3,.3,1.8,0,3.2-.4,4.3-1.2,1.1-.8,1.7-1.8,1.7-3s-.3-1.7-.8-2.3-1.2-1-2.1-1.3c-.8-.4-1.7-.7-2.7-1.1-1-.3-2.1-.6-3.1-.9-1-.3-2-.8-2.9-1.3-.9-.5-1.6-1.3-2.1-2.1-.5-.9-.8-2-.8-3.4s.3-2.5.8-3.4c.5-1,1.3-1.7,2.1-2.4.9-.6,1.9-1.1,3-1.4,1.1-.3,2.2-.4,3.3-.4,1.6,0,2.9.2,4.1.6,1.1.4,2.3.9,3.5,1.4v3.8c-1.3-.7-2.5-1.3-3.6-1.7-1.1-.4-2.3-.7-3.8-.7s-2.7.3-3.9.9c-1.1.6-1.7,1.5-1.7,2.7s.3,1.8.9,2.4,1.4,1,2.3,1.4c1,.3,2,.7,3.1,1,.9.3,1.8.6,2.8.9,1,.3,1.8.8,2.7,1.3.8.5,1.5,1.3,2,2.1.5.9.8,2,.8,3.4s-.5,3.4-1.4,4.6-2.2,2.1-3.6,2.7c-1.5.6-3,.8-4.5.8Z"/>
+    </g>
+  </g>
+</svg>

resources/profiles/FELIX Printers/filament/FELIXFood/Food Medium Plastic Syringe @0.50mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Medium Plastic Syringe @0.50mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "IQnumbi0N4BnvMfO",
+	"filament_id": "OFAzgHcF",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 0.50mm nozzle",
+		"FELIX Food Double 0.50mm nozzle",
+		"FELIX Food Switch 0.50mm nozzle"
+	],
+	"filament_diameter": [
+		"31.22"
+	],
+	"filament_flow_ratio": [
+		"1.05"
+	],
+	"filament_retraction_length": [
+		"3.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"6.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"0.75"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"7.2"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Medium Plastic Syringe @1.00mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Medium Plastic Syringe @1.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "p8CG6dHMUxNl7iPL",
+	"filament_id": "OFAzgHcF",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 1.00mm nozzle",
+		"FELIX Food Double 1.00mm nozzle",
+		"FELIX Food Switch 1.00mm nozzle"
+	],
+	"filament_diameter": [
+		"31.22"
+	],
+	"filament_flow_ratio": [
+		"1.05"
+	],
+	"filament_retraction_length": [
+		"3.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"6.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"1.5"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"27.0"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Medium Plastic Syringe @2.00mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Medium Plastic Syringe @2.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "s5uPS7I3E57tiRRC",
+	"filament_id": "OFAzgHcF",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 2.00mm nozzle",
+		"FELIX Food Double 2.00mm nozzle",
+		"FELIX Food Switch 2.00mm nozzle"
+	],
+	"filament_diameter": [
+		"31.22"
+	],
+	"filament_flow_ratio": [
+		"1.05"
+	],
+	"filament_retraction_length": [
+		"3.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"6.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"3.0"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"108.0"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Medium Plastic Syringe @3.00mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Medium Plastic Syringe @3.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "zlZtghh6ytU7N09m",
+	"filament_id": "OFAzgHcF",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 3.00mm nozzle",
+		"FELIX Food Double 3.00mm nozzle",
+		"FELIX Food Switch 3.00mm nozzle"
+	],
+	"filament_diameter": [
+		"31.22"
+	],
+	"filament_flow_ratio": [
+		"1.05"
+	],
+	"filament_retraction_length": [
+		"3.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"6.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"4.5"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"216.0"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Medium Plastic Syringe @4.00mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Medium Plastic Syringe @4.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "fvTZEcREMbs3JW1D",
+	"filament_id": "OFAzgHcF",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 4.00mm nozzle",
+		"FELIX Food Double 4.00mm nozzle",
+		"FELIX Food Switch 4.00mm nozzle"
+	],
+	"filament_diameter": [
+		"31.22"
+	],
+	"filament_flow_ratio": [
+		"1.05"
+	],
+	"filament_retraction_length": [
+		"3.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"6.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"6.0"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"432.0"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Medium Stainless Steel Syringe @0.50mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Medium Stainless Steel Syringe @0.50mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "2XyqnzMqyuRCqpPq",
+	"filament_id": "OFqZSD1S",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 0.50mm nozzle",
+		"FELIX Food Double 0.50mm nozzle",
+		"FELIX Food Switch 0.50mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.05"
+	],
+	"filament_retraction_length": [
+		"1.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"10.0"
+	],
+	"filament_deretraction_speed": [
+		"10.0"
+	],
+	"filament_retract_length_toolchange": [
+		"2.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"0.75"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"7.2"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Medium Stainless Steel Syringe @1.00mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Medium Stainless Steel Syringe @1.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "yNxVUGOb1kUbXLiw",
+	"filament_id": "OFqZSD1S",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 1.00mm nozzle",
+		"FELIX Food Double 1.00mm nozzle",
+		"FELIX Food Switch 1.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.05"
+	],
+	"filament_retraction_length": [
+		"1.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"10.0"
+	],
+	"filament_deretraction_speed": [
+		"10.0"
+	],
+	"filament_retract_length_toolchange": [
+		"2.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"1.5"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"27.0"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Medium Stainless Steel Syringe @2.00mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Medium Stainless Steel Syringe @2.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "4MhgYDnGFKLfurhc",
+	"filament_id": "OFqZSD1S",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 2.00mm nozzle",
+		"FELIX Food Double 2.00mm nozzle",
+		"FELIX Food Switch 2.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.05"
+	],
+	"filament_retraction_length": [
+		"1.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"10.0"
+	],
+	"filament_deretraction_speed": [
+		"10.0"
+	],
+	"filament_retract_length_toolchange": [
+		"2.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"3.0"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"108.0"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Medium Stainless Steel Syringe @3.00mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Medium Stainless Steel Syringe @3.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "mEH3Rgzzwjq9iptd",
+	"filament_id": "OFqZSD1S",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 3.00mm nozzle",
+		"FELIX Food Double 3.00mm nozzle",
+		"FELIX Food Switch 3.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.05"
+	],
+	"filament_retraction_length": [
+		"1.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"10.0"
+	],
+	"filament_deretraction_speed": [
+		"10.0"
+	],
+	"filament_retract_length_toolchange": [
+		"2.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"4.5"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"216.0"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Medium Stainless Steel Syringe @4.00mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Medium Stainless Steel Syringe @4.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "rJsNSIb8w9kOwhwE",
+	"filament_id": "OFqZSD1S",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 4.00mm nozzle",
+		"FELIX Food Double 4.00mm nozzle",
+		"FELIX Food Switch 4.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.05"
+	],
+	"filament_retraction_length": [
+		"1.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"10.0"
+	],
+	"filament_deretraction_speed": [
+		"10.0"
+	],
+	"filament_retract_length_toolchange": [
+		"2.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"6.0"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"432.0"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Thick Stainless Steel Syringe @0.50mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Thick Stainless Steel Syringe @0.50mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "dJzDnkh8Kyn3phhF",
+	"filament_id": "OFjXHG0Z",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 0.50mm nozzle",
+		"FELIX Food Double 0.50mm nozzle",
+		"FELIX Food Switch 0.50mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.02"
+	],
+	"filament_retraction_length": [
+		"2.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"4.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"0.75"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"4.8"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Thick Stainless Steel Syringe @1.00mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Thick Stainless Steel Syringe @1.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "QQi61sD4rX2jELMa",
+	"filament_id": "OFjXHG0Z",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 1.00mm nozzle",
+		"FELIX Food Double 1.00mm nozzle",
+		"FELIX Food Switch 1.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.02"
+	],
+	"filament_retraction_length": [
+		"2.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"4.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"1.5"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"18.0"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Thick Stainless Steel Syringe @2.00mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Thick Stainless Steel Syringe @2.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "KUmfC5HZL2hXPfey",
+	"filament_id": "OFjXHG0Z",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 2.00mm nozzle",
+		"FELIX Food Double 2.00mm nozzle",
+		"FELIX Food Switch 2.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.02"
+	],
+	"filament_retraction_length": [
+		"2.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"4.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"3.0"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"72.0"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Thick Stainless Steel Syringe @3.00mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Thick Stainless Steel Syringe @3.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "0BbaSUre1bztrKB0",
+	"filament_id": "OFjXHG0Z",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 3.00mm nozzle",
+		"FELIX Food Double 3.00mm nozzle",
+		"FELIX Food Switch 3.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.02"
+	],
+	"filament_retraction_length": [
+		"2.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"4.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"4.5"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"144.0"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Thick Stainless Steel Syringe @4.00mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Thick Stainless Steel Syringe @4.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "b179BTbFqjhnsHPT",
+	"filament_id": "OFjXHG0Z",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 4.00mm nozzle",
+		"FELIX Food Double 4.00mm nozzle",
+		"FELIX Food Switch 4.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.02"
+	],
+	"filament_retraction_length": [
+		"2.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"4.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"6.0"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"288.0"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Thin Plastic Syringe @0.50mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Thin Plastic Syringe @0.50mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "dBTTG8HJRYb7GHqy",
+	"filament_id": "OF0kP94Y",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 0.50mm nozzle",
+		"FELIX Food Double 0.50mm nozzle",
+		"FELIX Food Switch 0.50mm nozzle"
+	],
+	"filament_diameter": [
+		"31.22"
+	],
+	"filament_flow_ratio": [
+		"1.1"
+	],
+	"filament_retraction_length": [
+		"0.75"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"1.5"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"0.75"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"10.8"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Thin Plastic Syringe @1.00mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Thin Plastic Syringe @1.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "FITfR7iepAteWuno",
+	"filament_id": "OF0kP94Y",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 1.00mm nozzle",
+		"FELIX Food Double 1.00mm nozzle",
+		"FELIX Food Switch 1.00mm nozzle"
+	],
+	"filament_diameter": [
+		"31.22"
+	],
+	"filament_flow_ratio": [
+		"1.1"
+	],
+	"filament_retraction_length": [
+		"0.75"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"1.5"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"1.5"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"40.5"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Thin Plastic Syringe @2.00mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Thin Plastic Syringe @2.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "i2DZouQfWUnIm4R5",
+	"filament_id": "OF0kP94Y",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 2.00mm nozzle",
+		"FELIX Food Double 2.00mm nozzle",
+		"FELIX Food Switch 2.00mm nozzle"
+	],
+	"filament_diameter": [
+		"31.22"
+	],
+	"filament_flow_ratio": [
+		"1.1"
+	],
+	"filament_retraction_length": [
+		"0.75"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"1.5"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"3.0"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"162.0"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Thin Plastic Syringe @3.00mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Thin Plastic Syringe @3.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "EzV8T0DVT0NRPa7P",
+	"filament_id": "OF0kP94Y",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 3.00mm nozzle",
+		"FELIX Food Double 3.00mm nozzle",
+		"FELIX Food Switch 3.00mm nozzle"
+	],
+	"filament_diameter": [
+		"31.22"
+	],
+	"filament_flow_ratio": [
+		"1.1"
+	],
+	"filament_retraction_length": [
+		"0.75"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"1.5"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"4.5"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"324.0"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Thin Plastic Syringe @4.00mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Thin Plastic Syringe @4.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "Q6msqrC9TM0un5qw",
+	"filament_id": "OF0kP94Y",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 4.00mm nozzle",
+		"FELIX Food Double 4.00mm nozzle",
+		"FELIX Food Switch 4.00mm nozzle"
+	],
+	"filament_diameter": [
+		"31.22"
+	],
+	"filament_flow_ratio": [
+		"1.1"
+	],
+	"filament_retraction_length": [
+		"0.75"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"1.5"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"6.0"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"648.0"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Thin Stainless Steel Syringe @0.50mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Thin Stainless Steel Syringe @0.50mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "I9W6tiEnRSMrkyzl",
+	"filament_id": "OF40XIE8",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 0.50mm nozzle",
+		"FELIX Food Double 0.50mm nozzle",
+		"FELIX Food Switch 0.50mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.1"
+	],
+	"filament_retraction_length": [
+		"0.2"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"10.0"
+	],
+	"filament_deretraction_speed": [
+		"10.0"
+	],
+	"filament_retract_length_toolchange": [
+		"0.4"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"0.75"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"10.8"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Thin Stainless Steel Syringe @1.00mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Thin Stainless Steel Syringe @1.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "PJpJ8TTlDajNrRJo",
+	"filament_id": "OF40XIE8",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 1.00mm nozzle",
+		"FELIX Food Double 1.00mm nozzle",
+		"FELIX Food Switch 1.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.1"
+	],
+	"filament_retraction_length": [
+		"0.2"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"10.0"
+	],
+	"filament_deretraction_speed": [
+		"10.0"
+	],
+	"filament_retract_length_toolchange": [
+		"0.4"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"1.5"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"40.5"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Thin Stainless Steel Syringe @2.00mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Thin Stainless Steel Syringe @2.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "s3GOL7BWdRbaV4GM",
+	"filament_id": "OF40XIE8",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 2.00mm nozzle",
+		"FELIX Food Double 2.00mm nozzle",
+		"FELIX Food Switch 2.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.1"
+	],
+	"filament_retraction_length": [
+		"0.2"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"10.0"
+	],
+	"filament_deretraction_speed": [
+		"10.0"
+	],
+	"filament_retract_length_toolchange": [
+		"0.4"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"3.0"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"162.0"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Thin Stainless Steel Syringe @3.00mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Thin Stainless Steel Syringe @3.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "WKPEMCVctL0c5FFi",
+	"filament_id": "OF40XIE8",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 3.00mm nozzle",
+		"FELIX Food Double 3.00mm nozzle",
+		"FELIX Food Switch 3.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.1"
+	],
+	"filament_retraction_length": [
+		"0.2"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"10.0"
+	],
+	"filament_deretraction_speed": [
+		"10.0"
+	],
+	"filament_retract_length_toolchange": [
+		"0.4"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"4.5"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"324.0"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Thin Stainless Steel Syringe @4.00mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Thin Stainless Steel Syringe @4.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "I5UEkm93zhn9hdMF",
+	"filament_id": "OF40XIE8",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 4.00mm nozzle",
+		"FELIX Food Double 4.00mm nozzle",
+		"FELIX Food Switch 4.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.1"
+	],
+	"filament_retraction_length": [
+		"0.2"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"10.0"
+	],
+	"filament_deretraction_speed": [
+		"10.0"
+	],
+	"filament_retract_length_toolchange": [
+		"0.4"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"6.0"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"648.0"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Very Thick Stainless Steel Syringe @1.00mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Very Thick Stainless Steel Syringe @1.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "OIZKSwXaRY7WZecX",
+	"filament_id": "OF0xT5HR",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 1.00mm nozzle",
+		"FELIX Food Double 1.00mm nozzle",
+		"FELIX Food Switch 1.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_retraction_length": [
+		"2.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"4.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"0.75"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"13.5"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Very Thick Stainless Steel Syringe @2.00mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Very Thick Stainless Steel Syringe @2.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "al27KBjL9MAi3ri9",
+	"filament_id": "OF0xT5HR",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 2.00mm nozzle",
+		"FELIX Food Double 2.00mm nozzle",
+		"FELIX Food Switch 2.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_retraction_length": [
+		"2.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"4.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"1.5"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"53.0"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Very Thick Stainless Steel Syringe @3.00mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Very Thick Stainless Steel Syringe @3.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "42ADzpr7vGuh3AKC",
+	"filament_id": "OF0xT5HR",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 3.00mm nozzle",
+		"FELIX Food Double 3.00mm nozzle",
+		"FELIX Food Switch 3.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_retraction_length": [
+		"2.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"4.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"3.0"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"108.0"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Very Thick Stainless Steel Syringe @4.00mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Very Thick Stainless Steel Syringe @4.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "FpQC7Cf5qnW1E2QO",
+	"filament_id": "OF0xT5HR",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 4.00mm nozzle",
+		"FELIX Food Double 4.00mm nozzle",
+		"FELIX Food Switch 4.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_retraction_length": [
+		"2.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"4.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"4.5"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"216.0"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Very Thin Plastic Syringe @0.50mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Very Thin Plastic Syringe @0.50mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "9OMbRBrVCyDD6A2k",
+	"filament_id": "OF1XcHqz",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 0.50mm nozzle",
+		"FELIX Food Double 0.50mm nozzle",
+		"FELIX Food Switch 0.50mm nozzle"
+	],
+	"filament_diameter": [
+		"31.22"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_retraction_length": [
+		"0.5"
+	],
+	"filament_retract_restart_extra": [
+		"0.03"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"1.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"0.75"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"14.4"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Very Thin Plastic Syringe @1.00mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Very Thin Plastic Syringe @1.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "ukd2jpvA1sHePEfs",
+	"filament_id": "OF1XcHqz",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 1.00mm nozzle",
+		"FELIX Food Double 1.00mm nozzle",
+		"FELIX Food Switch 1.00mm nozzle"
+	],
+	"filament_diameter": [
+		"31.22"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_retraction_length": [
+		"0.5"
+	],
+	"filament_retract_restart_extra": [
+		"0.03"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"1.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"1.5"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"54.0"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Very Thin Plastic Syringe @2.00mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Very Thin Plastic Syringe @2.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "jXkY0MPClCiaCJGC",
+	"filament_id": "OF1XcHqz",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 2.00mm nozzle",
+		"FELIX Food Double 2.00mm nozzle",
+		"FELIX Food Switch 2.00mm nozzle"
+	],
+	"filament_diameter": [
+		"31.22"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_retraction_length": [
+		"0.5"
+	],
+	"filament_retract_restart_extra": [
+		"0.03"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"1.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"3.0"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"218.0"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Very Thin Plastic Syringe @3.00mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Very Thin Plastic Syringe @3.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "jSTp7ePK9UKaNX3S",
+	"filament_id": "OF1XcHqz",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 3.00mm nozzle",
+		"FELIX Food Double 3.00mm nozzle",
+		"FELIX Food Switch 3.00mm nozzle"
+	],
+	"filament_diameter": [
+		"31.22"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_retraction_length": [
+		"0.5"
+	],
+	"filament_retract_restart_extra": [
+		"0.03"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"1.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"4.5"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"432.0"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Very Thin Plastic Syringe @4.00mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Very Thin Plastic Syringe @4.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "q3tLnporrSrlZl6S",
+	"filament_id": "OF1XcHqz",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 4.00mm nozzle",
+		"FELIX Food Double 4.00mm nozzle",
+		"FELIX Food Switch 4.00mm nozzle"
+	],
+	"filament_diameter": [
+		"31.22"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_retraction_length": [
+		"0.5"
+	],
+	"filament_retract_restart_extra": [
+		"0.03"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"1.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"6.0"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"864.0"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Very Thin Stainless Steel Syringe @1.00mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Very Thin Stainless Steel  Syringe  @1.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "ZGtJ5dq6QEFrRzER",
+	"filament_id": "OFJDz9xO",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 1.00mm nozzle",
+		"FELIX Food Double 1.00mm nozzle",
+		"FELIX Food Switch 1.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_retraction_length": [
+		"0.1"
+	],
+	"filament_retract_restart_extra": [
+		"0.03"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"0.2"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.03"
+	],
+	"filament_wipe_distance": [
+		"1.5"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"54.0"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Very Thin Stainless Steel Syringe @2.00mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Very Thin Stainless Steel  Syringe  @2.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "il7EvApOb39ReoAt",
+	"filament_id": "OFJDz9xO",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 2.00mm nozzle",
+		"FELIX Food Double 2.00mm nozzle",
+		"FELIX Food Switch 2.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_retraction_length": [
+		"0.1"
+	],
+	"filament_retract_restart_extra": [
+		"0.03"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"0.2"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.03"
+	],
+	"filament_wipe_distance": [
+		"3.0"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"216.0"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Very Thin Stainless Steel Syringe @3.00mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Very Thin Stainless Steel  Syringe  @3.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "yTSl3aV0S2HD6zPy",
+	"filament_id": "OFJDz9xO",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 3.00mm nozzle",
+		"FELIX Food Double 3.00mm nozzle",
+		"FELIX Food Switch 3.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_retraction_length": [
+		"0.1"
+	],
+	"filament_retract_restart_extra": [
+		"0.03"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"0.2"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.03"
+	],
+	"filament_wipe_distance": [
+		"4.5"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"432.0"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Very Thin Stainless Steel Syringe @4.00mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Very Thin Stainless Steel  Syringe  @4.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "JfnwH4HjP0CQKuyr",
+	"filament_id": "OFJDz9xO",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 4.00mm nozzle",
+		"FELIX Food Double 4.00mm nozzle",
+		"FELIX Food Switch 4.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_retraction_length": [
+		"0.1"
+	],
+	"filament_retract_restart_extra": [
+		"0.03"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"0.2"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.03"
+	],
+	"filament_wipe_distance": [
+		"6.0"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"864.0"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Very Thin Stainless Steel Syringe @0.50mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Very Thin Stainless Steel Syringe @0.50mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "mIgwxwB2N67qAhxk",
+	"filament_id": "OFASY29j",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 0.50mm nozzle",
+		"FELIX Food Double 0.50mm nozzle",
+		"FELIX Food Switch 0.50mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_retraction_length": [
+		"0.1"
+	],
+	"filament_retract_restart_extra": [
+		"0.03"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"0.2"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.03"
+	],
+	"filament_wipe_distance": [
+		"0.75"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"14.4"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FELIX FLEX Brass @ 0.35mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX FLEX  Brass @ 0.35mm",
+	"inherits": "fdm_filament_flex",
+	"from": "system",
+	"setting_id": "UXX0sEaoqZvdXwi6",
+	"filament_id": "OFF6vK3j",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.35mm nozzle",
+		"FELIX Pro L 3.0 0.35mm nozzle",
+		"FELIX Pro XL 3.0 0.35mm nozzle",
+		"FELIX Tec 4 0.35mm nozzle"
+	],
+	"nozzle_temperature": [
+		"215.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"215.0"
+	],
+	"hot_plate_temp": [
+		"40.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"cool_plate_temp": [
+		"40.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"eng_plate_temp": [
+		"40.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"textured_plate_temp": [
+		"40.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"2.2"
+	],
+	"filament_retract_speed": [
+		"50.0"
+	],
+	"filament_retraction_speed": [
+		"50.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.05"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"60.0"
+	],
+	"fan_max_speed": [
+		"60.0"
+	],
+	"filament_density": [
+		"1.38"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FELIX FLEX Brass @ 0.50mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX FLEX  Brass @ 0.50mm",
+	"inherits": "fdm_filament_flex",
+	"from": "system",
+	"setting_id": "B4AmHHxdvhsjN34a",
+	"filament_id": "OFF6vK3j",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.50mm nozzle",
+		"FELIX Pro L 3.0 0.50mm nozzle",
+		"FELIX Pro XL 3.0 0.50mm nozzle",
+		"FELIX Tec 4 0.50mm nozzle"
+	],
+	"nozzle_temperature": [
+		"215.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"215.0"
+	],
+	"hot_plate_temp": [
+		"40.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"cool_plate_temp": [
+		"40.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"eng_plate_temp": [
+		"40.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"textured_plate_temp": [
+		"40.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"2.2"
+	],
+	"filament_retract_speed": [
+		"50.0"
+	],
+	"filament_retraction_speed": [
+		"50.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.05"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"60.0"
+	],
+	"fan_max_speed": [
+		"60.0"
+	],
+	"filament_density": [
+		"1.38"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FELIX FLEX Hardened Steel @ 0.25mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX FLEX Hardened Steel @ 0.25mm",
+	"inherits": "fdm_filament_flex",
+	"from": "system",
+	"setting_id": "7z6rkaF5DBbiccZP",
+	"filament_id": "OFSOY4F3",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.25mm nozzle",
+		"FELIX Pro L 3.0 0.25mm nozzle",
+		"FELIX Pro XL 3.0 0.25mm nozzle",
+		"FELIX Tec 4 0.25mm nozzle"
+	],
+	"nozzle_temperature": [
+		"225.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"225.0"
+	],
+	"hot_plate_temp": [
+		"40.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"cool_plate_temp": [
+		"40.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"eng_plate_temp": [
+		"40.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"textured_plate_temp": [
+		"40.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"2.2"
+	],
+	"filament_retract_speed": [
+		"50.0"
+	],
+	"filament_retraction_speed": [
+		"50.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.05"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"60.0"
+	],
+	"fan_max_speed": [
+		"60.0"
+	],
+	"filament_density": [
+		"1.38"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FELIX FLEX Hardened Steel @ 0.35mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX FLEX Hardened Steel @ 0.35mm",
+	"inherits": "fdm_filament_flex",
+	"from": "system",
+	"setting_id": "DJRiMo6Aq0BvhFC9",
+	"filament_id": "OFSOY4F3",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.35mm nozzle",
+		"FELIX Pro L 3.0 0.35mm nozzle",
+		"FELIX Pro XL 3.0 0.35mm nozzle",
+		"FELIX Tec 4 0.35mm nozzle"
+	],
+	"nozzle_temperature": [
+		"225.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"225.0"
+	],
+	"hot_plate_temp": [
+		"40.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"cool_plate_temp": [
+		"40.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"eng_plate_temp": [
+		"40.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"textured_plate_temp": [
+		"40.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"2.2"
+	],
+	"filament_retract_speed": [
+		"50.0"
+	],
+	"filament_retraction_speed": [
+		"50.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.05"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"60.0"
+	],
+	"fan_max_speed": [
+		"60.0"
+	],
+	"filament_density": [
+		"1.38"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FELIX FLEX Hardened Steel @ 0.50mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX FLEX Hardened Steel @ 0.50mm",
+	"inherits": "fdm_filament_flex",
+	"from": "system",
+	"setting_id": "xgFrl1QpyQFFqBYz",
+	"filament_id": "OFSOY4F3",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.50mm nozzle",
+		"FELIX Pro L 3.0 0.50mm nozzle",
+		"FELIX Pro XL 3.0 0.50mm nozzle",
+		"FELIX Tec 4 0.50mm nozzle"
+	],
+	"nozzle_temperature": [
+		"225.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"225.0"
+	],
+	"hot_plate_temp": [
+		"40.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"cool_plate_temp": [
+		"40.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"eng_plate_temp": [
+		"40.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"textured_plate_temp": [
+		"40.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"2.2"
+	],
+	"filament_retract_speed": [
+		"50.0"
+	],
+	"filament_retraction_speed": [
+		"50.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.05"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"60.0"
+	],
+	"fan_max_speed": [
+		"60.0"
+	],
+	"filament_density": [
+		"1.38"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FELIX FLEX Hardened Steel @ 0.70mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX FLEX Hardened Steel @ 0.70mm",
+	"inherits": "fdm_filament_flex",
+	"from": "system",
+	"setting_id": "eZf8u1vzaQbsjyqO",
+	"filament_id": "OFSOY4F3",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.70mm nozzle",
+		"FELIX Pro L 3.0 0.70mm nozzle",
+		"FELIX Pro XL 3.0 0.70mm nozzle",
+		"FELIX Tec 4 0.70mm nozzle"
+	],
+	"nozzle_temperature": [
+		"225.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"225.0"
+	],
+	"hot_plate_temp": [
+		"40.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"cool_plate_temp": [
+		"40.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"eng_plate_temp": [
+		"40.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"textured_plate_temp": [
+		"40.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"2.2"
+	],
+	"filament_retract_speed": [
+		"50.0"
+	],
+	"filament_retraction_speed": [
+		"50.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.05"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"60.0"
+	],
+	"fan_max_speed": [
+		"60.0"
+	],
+	"filament_density": [
+		"1.38"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FELIX PETG Brass @ 0.35mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX PETG Brass @ 0.35mm",
+	"inherits": "fdm_filament_pet",
+	"from": "system",
+	"setting_id": "KZzk6aIxMvt1JlOR",
+	"filament_id": "OF17qLwN",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.35mm nozzle",
+		"FELIX Pro L 3.0 0.35mm nozzle",
+		"FELIX Pro XL 3.0 0.35mm nozzle",
+		"FELIX Tec 4 0.35mm nozzle"
+	],
+	"nozzle_temperature": [
+		"220.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220.0"
+	],
+	"hot_plate_temp": [
+		"75.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"cool_plate_temp": [
+		"75.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"eng_plate_temp": [
+		"75.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"textured_plate_temp": [
+		"75.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"1.2"
+	],
+	"filament_retract_speed": [
+		"60.0"
+	],
+	"filament_retraction_speed": [
+		"60.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.05"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"60.0"
+	],
+	"fan_max_speed": [
+		"60.0"
+	],
+	"filament_density": [
+		"1.27"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FELIX PETG Brass @ 0.50mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX PETG Brass @ 0.50mm",
+	"inherits": "fdm_filament_pet",
+	"from": "system",
+	"setting_id": "RWPOGeCx1EEYeV8R",
+	"filament_id": "OF17qLwN",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.50mm nozzle",
+		"FELIX Pro L 3.0 0.50mm nozzle",
+		"FELIX Pro XL 3.0 0.50mm nozzle",
+		"FELIX Tec 4 0.50mm nozzle"
+	],
+	"nozzle_temperature": [
+		"220.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220.0"
+	],
+	"hot_plate_temp": [
+		"75.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"cool_plate_temp": [
+		"75.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"eng_plate_temp": [
+		"75.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"textured_plate_temp": [
+		"75.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"1.2"
+	],
+	"filament_retract_speed": [
+		"60.0"
+	],
+	"filament_retraction_speed": [
+		"60.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.05"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"60.0"
+	],
+	"fan_max_speed": [
+		"60.0"
+	],
+	"filament_density": [
+		"1.27"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FELIX PETG Hardened Steel @ 0.25mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX PETG Hardened Steel @ 0.25mm",
+	"inherits": "fdm_filament_pet",
+	"from": "system",
+	"setting_id": "5RK6gGxFKyADXi4x",
+	"filament_id": "OFQo5ZHk",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.25mm nozzle",
+		"FELIX Pro L 3.0 0.25mm nozzle",
+		"FELIX Pro XL 3.0 0.25mm nozzle",
+		"FELIX Tec 4 0.25mm nozzle"
+	],
+	"nozzle_temperature": [
+		"235.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"235.0"
+	],
+	"hot_plate_temp": [
+		"75.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"cool_plate_temp": [
+		"75.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"eng_plate_temp": [
+		"75.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"textured_plate_temp": [
+		"75.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"1.2"
+	],
+	"filament_retract_speed": [
+		"60.0"
+	],
+	"filament_retraction_speed": [
+		"60.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.05"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"60.0"
+	],
+	"fan_max_speed": [
+		"60.0"
+	],
+	"filament_density": [
+		"1.27"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FELIX PETG Hardened Steel @ 0.35mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX PETG Hardened Steel @ 0.35mm",
+	"inherits": "fdm_filament_pet",
+	"from": "system",
+	"setting_id": "rz08j2cn8mlnvAxh",
+	"filament_id": "OFQo5ZHk",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.35mm nozzle",
+		"FELIX Pro L 3.0 0.35mm nozzle",
+		"FELIX Pro XL 3.0 0.35mm nozzle",
+		"FELIX Tec 4 0.35mm nozzle"
+	],
+	"nozzle_temperature": [
+		"235.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"235.0"
+	],
+	"hot_plate_temp": [
+		"75.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"cool_plate_temp": [
+		"75.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"eng_plate_temp": [
+		"75.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"textured_plate_temp": [
+		"75.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"1.2"
+	],
+	"filament_retract_speed": [
+		"60.0"
+	],
+	"filament_retraction_speed": [
+		"60.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.05"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"60.0"
+	],
+	"fan_max_speed": [
+		"60.0"
+	],
+	"filament_density": [
+		"1.27"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FELIX PETG Hardened Steel @ 0.50mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX PETG Hardened Steel @ 0.50mm",
+	"inherits": "fdm_filament_pet",
+	"from": "system",
+	"setting_id": "1xOwhrqAqJVO48d0",
+	"filament_id": "OFQo5ZHk",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.50mm nozzle",
+		"FELIX Pro L 3.0 0.50mm nozzle",
+		"FELIX Pro XL 3.0 0.50mm nozzle",
+		"FELIX Tec 4 0.50mm nozzle"
+	],
+	"nozzle_temperature": [
+		"235.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"235.0"
+	],
+	"hot_plate_temp": [
+		"75.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"cool_plate_temp": [
+		"75.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"eng_plate_temp": [
+		"75.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"textured_plate_temp": [
+		"75.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"1.2"
+	],
+	"filament_retract_speed": [
+		"60.0"
+	],
+	"filament_retraction_speed": [
+		"60.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.05"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"60.0"
+	],
+	"fan_max_speed": [
+		"60.0"
+	],
+	"filament_density": [
+		"1.27"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FELIX PETG Hardened Steel @ 0.70mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX PETG Hardened Steel @ 0.70mm",
+	"inherits": "fdm_filament_pet",
+	"from": "system",
+	"setting_id": "I2QXz0yDQN6ULNeF",
+	"filament_id": "OFQo5ZHk",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.70mm nozzle",
+		"FELIX Pro L 3.0 0.70mm nozzle",
+		"FELIX Pro XL 3.0 0.70mm nozzle",
+		"FELIX Tec 4 0.70mm nozzle"
+	],
+	"nozzle_temperature": [
+		"235.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"235.0"
+	],
+	"hot_plate_temp": [
+		"75.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"cool_plate_temp": [
+		"75.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"eng_plate_temp": [
+		"75.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"textured_plate_temp": [
+		"75.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"1.2"
+	],
+	"filament_retract_speed": [
+		"60.0"
+	],
+	"filament_retraction_speed": [
+		"60.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.05"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"60.0"
+	],
+	"fan_max_speed": [
+		"60.0"
+	],
+	"filament_density": [
+		"1.27"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FELIX Premium PLA Brass @ 0.35mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX Premium PLA Brass @ 0.35mm",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "6Ax3SY7RI04PcFFJ",
+	"filament_id": "OF8sLgrm",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.35mm nozzle",
+		"FELIX Pro L 3.0 0.35mm nozzle",
+		"FELIX Pro XL 3.0 0.35mm nozzle",
+		"FELIX Tec 4 0.35mm nozzle"
+	],
+	"nozzle_temperature": [
+		"190.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"190.0"
+	],
+	"hot_plate_temp": [
+		"55.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"cool_plate_temp": [
+		"55.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"eng_plate_temp": [
+		"55.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"textured_plate_temp": [
+		"55.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"1.4"
+	],
+	"filament_retract_speed": [
+		"50.0"
+	],
+	"filament_retraction_speed": [
+		"50.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.05"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"100.0"
+	],
+	"fan_max_speed": [
+		"100.0"
+	],
+	"filament_density": [
+		"1.22"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FELIX Premium PLA Brass @ 0.50mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX Premium PLA Brass @ 0.50mm",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "TzRWTEZl14IWlhrc",
+	"filament_id": "OF8sLgrm",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.50mm nozzle",
+		"FELIX Pro L 3.0 0.50mm nozzle",
+		"FELIX Pro XL 3.0 0.50mm nozzle",
+		"FELIX Tec 4 0.50mm nozzle"
+	],
+	"nozzle_temperature": [
+		"190.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"190.0"
+	],
+	"hot_plate_temp": [
+		"55.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"cool_plate_temp": [
+		"55.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"eng_plate_temp": [
+		"55.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"textured_plate_temp": [
+		"55.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"1.4"
+	],
+	"filament_retract_speed": [
+		"50.0"
+	],
+	"filament_retraction_speed": [
+		"50.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.05"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"100.0"
+	],
+	"fan_max_speed": [
+		"100.0"
+	],
+	"filament_density": [
+		"1.22"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FELIX Premium PLA Hardened Steel @ 0.25mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX Premium PLA Hardened Steel @ 0.25mm",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "RtjX1Noxcsnv5cHv",
+	"filament_id": "OFi00jWL",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.25mm nozzle",
+		"FELIX Pro L 3.0 0.25mm nozzle",
+		"FELIX Pro XL 3.0 0.25mm nozzle",
+		"FELIX Tec 4 0.25mm nozzle"
+	],
+	"nozzle_temperature": [
+		"205.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"205.0"
+	],
+	"hot_plate_temp": [
+		"55.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"cool_plate_temp": [
+		"55.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"eng_plate_temp": [
+		"55.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"textured_plate_temp": [
+		"55.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"1.4"
+	],
+	"filament_retract_speed": [
+		"50.0"
+	],
+	"filament_retraction_speed": [
+		"50.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.05"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"100.0"
+	],
+	"fan_max_speed": [
+		"100.0"
+	],
+	"filament_density": [
+		"1.22"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FELIX Premium PLA Hardened Steel @ 0.35mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX Premium PLA Hardened Steel @ 0.35mm",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "aQI8mIoLrX3liAlM",
+	"filament_id": "OFi00jWL",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.35mm nozzle",
+		"FELIX Pro L 3.0 0.35mm nozzle",
+		"FELIX Pro XL 3.0 0.35mm nozzle",
+		"FELIX Tec 4 0.35mm nozzle"
+	],
+	"nozzle_temperature": [
+		"205.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"205.0"
+	],
+	"hot_plate_temp": [
+		"55.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"cool_plate_temp": [
+		"55.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"eng_plate_temp": [
+		"55.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"textured_plate_temp": [
+		"55.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"1.4"
+	],
+	"filament_retract_speed": [
+		"50.0"
+	],
+	"filament_retraction_speed": [
+		"50.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.05"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"100.0"
+	],
+	"fan_max_speed": [
+		"100.0"
+	],
+	"filament_density": [
+		"1.22"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FELIX Premium PLA Hardened Steel @ 0.50mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX Premium PLA Hardened Steel @ 0.50mm",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "pdnfmqbhfYXV8MAj",
+	"filament_id": "OFi00jWL",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.50mm nozzle",
+		"FELIX Pro L 3.0 0.50mm nozzle",
+		"FELIX Pro XL 3.0 0.50mm nozzle",
+		"FELIX Tec 4 0.50mm nozzle"
+	],
+	"nozzle_temperature": [
+		"205.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"205.0"
+	],
+	"hot_plate_temp": [
+		"55.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"cool_plate_temp": [
+		"55.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"eng_plate_temp": [
+		"55.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"textured_plate_temp": [
+		"55.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"1.4"
+	],
+	"filament_retract_speed": [
+		"50.0"
+	],
+	"filament_retraction_speed": [
+		"50.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.05"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"100.0"
+	],
+	"fan_max_speed": [
+		"100.0"
+	],
+	"filament_density": [
+		"1.22"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FELIX Premium PLA Hardened Steel @ 0.70mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX Premium PLA Hardened Steel @ 0.70mm",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "BDxehnk3kKVRlysR",
+	"filament_id": "OFi00jWL",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.70mm nozzle",
+		"FELIX Pro L 3.0 0.70mm nozzle",
+		"FELIX Pro XL 3.0 0.70mm nozzle",
+		"FELIX Tec 4 0.70mm nozzle"
+	],
+	"nozzle_temperature": [
+		"205.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"205.0"
+	],
+	"hot_plate_temp": [
+		"55.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"cool_plate_temp": [
+		"55.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"eng_plate_temp": [
+		"55.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"textured_plate_temp": [
+		"55.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"1.4"
+	],
+	"filament_retract_speed": [
+		"50.0"
+	],
+	"filament_retraction_speed": [
+		"50.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.05"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"100.0"
+	],
+	"fan_max_speed": [
+		"100.0"
+	],
+	"filament_density": [
+		"1.22"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FELIX Wood Brass @ 0.35mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX Wood  Brass @ 0.35mm",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "nRikN9oc1mOeA6dO",
+	"filament_id": "OF7CzDzq",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.35mm nozzle",
+		"FELIX Pro L 3.0 0.35mm nozzle",
+		"FELIX Pro XL 3.0 0.35mm nozzle",
+		"FELIX Tec 4 0.35mm nozzle"
+	],
+	"nozzle_temperature": [
+		"185.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"185.0"
+	],
+	"hot_plate_temp": [
+		"55.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"cool_plate_temp": [
+		"55.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"eng_plate_temp": [
+		"55.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"textured_plate_temp": [
+		"55.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"2.5"
+	],
+	"filament_retract_speed": [
+		"60.0"
+	],
+	"filament_retraction_speed": [
+		"60.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.15"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"100.0"
+	],
+	"fan_max_speed": [
+		"100.0"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FELIX Wood Brass @ 0.50mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX Wood Brass @ 0.50mm",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "SF4eGuHqUCtfEAGy",
+	"filament_id": "OFKwdz3w",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.50mm nozzle",
+		"FELIX Pro L 3.0 0.50mm nozzle",
+		"FELIX Pro XL 3.0 0.50mm nozzle",
+		"FELIX Tec 4 0.50mm nozzle"
+	],
+	"nozzle_temperature": [
+		"185.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"185.0"
+	],
+	"hot_plate_temp": [
+		"55.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"cool_plate_temp": [
+		"55.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"eng_plate_temp": [
+		"55.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"textured_plate_temp": [
+		"55.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"2.5"
+	],
+	"filament_retract_speed": [
+		"60.0"
+	],
+	"filament_retraction_speed": [
+		"60.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.15"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"100.0"
+	],
+	"fan_max_speed": [
+		"100.0"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FELIX Wood Hardened Steel @ 0.25mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX Wood Hardened Steel @ 0.25mm",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "AkZV2IjFVNLytIaY",
+	"filament_id": "OFsMMDMp",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.25mm nozzle",
+		"FELIX Pro L 3.0 0.25mm nozzle",
+		"FELIX Pro XL 3.0 0.25mm nozzle",
+		"FELIX Tec 4 0.25mm nozzle"
+	],
+	"nozzle_temperature": [
+		"200.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"200.0"
+	],
+	"hot_plate_temp": [
+		"55.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"cool_plate_temp": [
+		"55.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"eng_plate_temp": [
+		"55.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"textured_plate_temp": [
+		"55.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"2.5"
+	],
+	"filament_retract_speed": [
+		"60.0"
+	],
+	"filament_retraction_speed": [
+		"60.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.15"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"100.0"
+	],
+	"fan_max_speed": [
+		"100.0"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FELIX Wood Hardened Steel @ 0.35mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX Wood Hardened Steel @ 0.35mm",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "MEGMFP2nv59vZSpf",
+	"filament_id": "OFsMMDMp",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.35mm nozzle",
+		"FELIX Pro L 3.0 0.35mm nozzle",
+		"FELIX Pro XL 3.0 0.35mm nozzle",
+		"FELIX Tec 4 0.35mm nozzle"
+	],
+	"nozzle_temperature": [
+		"200.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"200.0"
+	],
+	"hot_plate_temp": [
+		"55.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"cool_plate_temp": [
+		"55.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"eng_plate_temp": [
+		"55.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"textured_plate_temp": [
+		"55.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"2.5"
+	],
+	"filament_retract_speed": [
+		"60.0"
+	],
+	"filament_retraction_speed": [
+		"60.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.15"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"100.0"
+	],
+	"fan_max_speed": [
+		"100.0"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FELIX Wood Hardened Steel @ 0.50mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX Wood Hardened Steel @ 0.50mm",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "ObSufa3ZQ8tUmJUB",
+	"filament_id": "OFsMMDMp",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.50mm nozzle",
+		"FELIX Pro L 3.0 0.50mm nozzle",
+		"FELIX Pro XL 3.0 0.50mm nozzle",
+		"FELIX Tec 4 0.50mm nozzle"
+	],
+	"nozzle_temperature": [
+		"200.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"200.0"
+	],
+	"hot_plate_temp": [
+		"55.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"cool_plate_temp": [
+		"55.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"eng_plate_temp": [
+		"55.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"textured_plate_temp": [
+		"55.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"2.5"
+	],
+	"filament_retract_speed": [
+		"60.0"
+	],
+	"filament_retraction_speed": [
+		"60.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.15"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"100.0"
+	],
+	"fan_max_speed": [
+		"100.0"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FELIX Wood Hardened Steel @ 0.70mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX Wood Hardened Steel @ 0.70mm",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "LCRYcNn6HN4lviM2",
+	"filament_id": "OFsMMDMp",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.70mm nozzle",
+		"FELIX Pro L 3.0 0.70mm nozzle",
+		"FELIX Pro XL 3.0 0.70mm nozzle",
+		"FELIX Tec 4 0.70mm nozzle"
+	],
+	"nozzle_temperature": [
+		"200.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"200.0"
+	],
+	"hot_plate_temp": [
+		"55.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"cool_plate_temp": [
+		"55.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"eng_plate_temp": [
+		"55.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"textured_plate_temp": [
+		"55.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"2.5"
+	],
+	"filament_retract_speed": [
+		"60.0"
+	],
+	"filament_retraction_speed": [
+		"60.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.15"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"100.0"
+	],
+	"fan_max_speed": [
+		"100.0"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FORMFUTURA AppoloX ASA Brass @ 0.35mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FORMFUTURA AppoloX ASA Brass @ 0.35mm",
+	"inherits": "fdm_filament_asa",
+	"from": "system",
+	"setting_id": "gRmosSxV2WFOgLAa",
+	"filament_id": "OFEUX7D3",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.35mm nozzle",
+		"FELIX Pro L 3.0 0.35mm nozzle",
+		"FELIX Pro XL 3.0 0.35mm nozzle",
+		"FELIX Tec 4 0.35mm nozzle"
+	],
+	"nozzle_temperature": [
+		"235.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"235.0"
+	],
+	"hot_plate_temp": [
+		"90.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"90.0"
+	],
+	"cool_plate_temp": [
+		"90.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"90.0"
+	],
+	"eng_plate_temp": [
+		"90.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"90.0"
+	],
+	"textured_plate_temp": [
+		"90.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"90.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"140"
+	],
+	"filament_retract_length": [
+		"1.4"
+	],
+	"filament_retract_speed": [
+		"50.0"
+	],
+	"filament_retraction_speed": [
+		"50.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"40.0"
+	],
+	"fan_max_speed": [
+		"40.0"
+	],
+	"filament_density": [
+		"1.07"
+	],
+	"filament_vendor": [
+		"FORMFUTURA"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FORMFUTURA AppoloX ASA Brass @ 0.50mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FORMFUTURA AppoloX ASA Brass @ 0.50mm",
+	"inherits": "fdm_filament_asa",
+	"from": "system",
+	"setting_id": "iXdebkq6x0RsCLSh",
+	"filament_id": "OFEUX7D3",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.50mm nozzle",
+		"FELIX Pro L 3.0 0.50mm nozzle",
+		"FELIX Pro XL 3.0 0.50mm nozzle",
+		"FELIX Tec 4 0.50mm nozzle"
+	],
+	"nozzle_temperature": [
+		"235.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"235.0"
+	],
+	"hot_plate_temp": [
+		"90.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"90.0"
+	],
+	"cool_plate_temp": [
+		"90.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"90.0"
+	],
+	"eng_plate_temp": [
+		"90.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"90.0"
+	],
+	"textured_plate_temp": [
+		"90.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"90.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"140"
+	],
+	"filament_retract_length": [
+		"1.4"
+	],
+	"filament_retract_speed": [
+		"50.0"
+	],
+	"filament_retraction_speed": [
+		"50.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"40.0"
+	],
+	"fan_max_speed": [
+		"40.0"
+	],
+	"filament_density": [
+		"1.07"
+	],
+	"filament_vendor": [
+		"FORMFUTURA"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FORMFUTURA AppoloX ASA Hardened Steel @ 0.25mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FORMFUTURA AppoloX ASA Hardened Steel @ 0.25mm",
+	"inherits": "fdm_filament_asa",
+	"from": "system",
+	"setting_id": "vDwvCcVTrlXsApST",
+	"filament_id": "OFguQdOr",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.25mm nozzle",
+		"FELIX Pro L 3.0 0.25mm nozzle",
+		"FELIX Pro XL 3.0 0.25mm nozzle",
+		"FELIX Tec 4 0.25mm nozzle"
+	],
+	"nozzle_temperature": [
+		"245.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"245.0"
+	],
+	"hot_plate_temp": [
+		"90.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"90.0"
+	],
+	"cool_plate_temp": [
+		"90.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"90.0"
+	],
+	"eng_plate_temp": [
+		"90.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"90.0"
+	],
+	"textured_plate_temp": [
+		"90.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"90.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"140"
+	],
+	"filament_retract_length": [
+		"1.4"
+	],
+	"filament_retract_speed": [
+		"50.0"
+	],
+	"filament_retraction_speed": [
+		"50.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"40.0"
+	],
+	"fan_max_speed": [
+		"40.0"
+	],
+	"filament_density": [
+		"1.07"
+	],
+	"filament_vendor": [
+		"FORMFUTURA"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FORMFUTURA AppoloX ASA Hardened Steel @ 0.35mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FORMFUTURA AppoloX ASA Hardened Steel @ 0.35mm",
+	"inherits": "fdm_filament_asa",
+	"from": "system",
+	"setting_id": "WdP7DnbgAI8O4JOR",
+	"filament_id": "OFguQdOr",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.35mm nozzle",
+		"FELIX Pro L 3.0 0.35mm nozzle",
+		"FELIX Pro XL 3.0 0.35mm nozzle",
+		"FELIX Tec 4 0.35mm nozzle"
+	],
+	"nozzle_temperature": [
+		"245.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"245.0"
+	],
+	"hot_plate_temp": [
+		"90.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"90.0"
+	],
+	"cool_plate_temp": [
+		"90.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"90.0"
+	],
+	"eng_plate_temp": [
+		"90.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"90.0"
+	],
+	"textured_plate_temp": [
+		"90.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"90.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"140"
+	],
+	"filament_retract_length": [
+		"1.4"
+	],
+	"filament_retract_speed": [
+		"50.0"
+	],
+	"filament_retraction_speed": [
+		"50.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"40.0"
+	],
+	"fan_max_speed": [
+		"40.0"
+	],
+	"filament_density": [
+		"1.07"
+	],
+	"filament_vendor": [
+		"FORMFUTURA"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FORMFUTURA AppoloX ASA Hardened Steel @ 0.50mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FORMFUTURA AppoloX ASA Hardened Steel @ 0.50mm",
+	"inherits": "fdm_filament_asa",
+	"from": "system",
+	"setting_id": "wwPIQoP8z2kiDq6c",
+	"filament_id": "OFguQdOr",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.50mm nozzle",
+		"FELIX Pro L 3.0 0.50mm nozzle",
+		"FELIX Pro XL 3.0 0.50mm nozzle",
+		"FELIX Tec 4 0.50mm nozzle"
+	],
+	"nozzle_temperature": [
+		"245.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"245.0"
+	],
+	"hot_plate_temp": [
+		"90.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"90.0"
+	],
+	"cool_plate_temp": [
+		"90.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"90.0"
+	],
+	"eng_plate_temp": [
+		"90.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"90.0"
+	],
+	"textured_plate_temp": [
+		"90.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"90.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"140"
+	],
+	"filament_retract_length": [
+		"1.4"
+	],
+	"filament_retract_speed": [
+		"50.0"
+	],
+	"filament_retraction_speed": [
+		"50.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"40.0"
+	],
+	"fan_max_speed": [
+		"40.0"
+	],
+	"filament_density": [
+		"1.07"
+	],
+	"filament_vendor": [
+		"FORMFUTURA"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FORMFUTURA AppoloX ASA Hardened Steel @ 0.70mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FORMFUTURA AppoloX ASA Hardened Steel @ 0.70mm",
+	"inherits": "fdm_filament_asa",
+	"from": "system",
+	"setting_id": "pc50UjGaC3hGbzLo",
+	"filament_id": "OFguQdOr",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.70mm nozzle",
+		"FELIX Pro L 3.0 0.70mm nozzle",
+		"FELIX Pro XL 3.0 0.70mm nozzle",
+		"FELIX Tec 4 0.70mm nozzle"
+	],
+	"nozzle_temperature": [
+		"245.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"245.0"
+	],
+	"hot_plate_temp": [
+		"90.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"90.0"
+	],
+	"cool_plate_temp": [
+		"90.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"90.0"
+	],
+	"eng_plate_temp": [
+		"90.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"90.0"
+	],
+	"textured_plate_temp": [
+		"90.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"90.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"140"
+	],
+	"filament_retract_length": [
+		"1.4"
+	],
+	"filament_retract_speed": [
+		"50.0"
+	],
+	"filament_retraction_speed": [
+		"50.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_flow_ratio": [
+		"0.94"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"40.0"
+	],
+	"fan_max_speed": [
+		"40.0"
+	],
+	"filament_density": [
+		"1.07"
+	],
+	"filament_vendor": [
+		"FORMFUTURA"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FORMFUTURA Aquasolve PVA Brass @ 0.35mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FORMFUTURA Aquasolve PVA Brass @ 0.35mm",
+	"inherits": "fdm_filament_pva",
+	"from": "system",
+	"setting_id": "BJplNxEdFo9WucQi",
+	"filament_id": "OFumEwBr",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.35mm nozzle",
+		"FELIX Pro L 3.0 0.35mm nozzle",
+		"FELIX Pro XL 3.0 0.35mm nozzle",
+		"FELIX Tec 4 0.35mm nozzle"
+	],
+	"nozzle_temperature": [
+		"195.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"195.0"
+	],
+	"hot_plate_temp": [
+		"55.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"cool_plate_temp": [
+		"55.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"eng_plate_temp": [
+		"55.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"textured_plate_temp": [
+		"55.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"2.5"
+	],
+	"filament_retract_speed": [
+		"55.0"
+	],
+	"filament_retraction_speed": [
+		"55.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.2"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"40.0"
+	],
+	"fan_max_speed": [
+		"40.0"
+	],
+	"filament_density": [
+		"1.23"
+	],
+	"filament_vendor": [
+		"FORMFUTURA"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FORMFUTURA Aquasolve PVA Brass @ 0.50mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FORMFUTURA Aquasolve PVA Brass @ 0.50mm",
+	"inherits": "fdm_filament_pva",
+	"from": "system",
+	"setting_id": "EcGwm5A12REi6etq",
+	"filament_id": "OFumEwBr",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.50mm nozzle",
+		"FELIX Pro L 3.0 0.50mm nozzle",
+		"FELIX Pro XL 3.0 0.50mm nozzle",
+		"FELIX Tec 4 0.50mm nozzle"
+	],
+	"nozzle_temperature": [
+		"195.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"195.0"
+	],
+	"hot_plate_temp": [
+		"55.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"cool_plate_temp": [
+		"55.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"eng_plate_temp": [
+		"55.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"textured_plate_temp": [
+		"55.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"2.5"
+	],
+	"filament_retract_speed": [
+		"55.0"
+	],
+	"filament_retraction_speed": [
+		"55.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.2"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"40.0"
+	],
+	"fan_max_speed": [
+		"40.0"
+	],
+	"filament_density": [
+		"1.23"
+	],
+	"filament_vendor": [
+		"FORMFUTURA"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FORMFUTURA Aquasolve PVA Hardened Steel @ 0.25mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FORMFUTURA Aquasolve PVA Hardened Steel @ 0.25mm",
+	"inherits": "fdm_filament_pva",
+	"from": "system",
+	"setting_id": "Dd4dc8lFUOaswJKt",
+	"filament_id": "OFQ3GEWL",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.25mm nozzle",
+		"FELIX Pro L 3.0 0.25mm nozzle",
+		"FELIX Pro XL 3.0 0.25mm nozzle",
+		"FELIX Tec 4 0.25mm nozzle"
+	],
+	"nozzle_temperature": [
+		"205.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"205.0"
+	],
+	"hot_plate_temp": [
+		"55.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"cool_plate_temp": [
+		"55.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"eng_plate_temp": [
+		"55.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"textured_plate_temp": [
+		"55.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"2.5"
+	],
+	"filament_retract_speed": [
+		"55.0"
+	],
+	"filament_retraction_speed": [
+		"55.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.2"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"40.0"
+	],
+	"fan_max_speed": [
+		"40.0"
+	],
+	"filament_density": [
+		"1.23"
+	],
+	"filament_vendor": [
+		"FORMFUTURA"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FORMFUTURA Aquasolve PVA Hardened Steel @ 0.35mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FORMFUTURA Aquasolve PVA Hardened Steel @ 0.35mm",
+	"inherits": "fdm_filament_pva",
+	"from": "system",
+	"setting_id": "3JJ4fQmtK1Ukauyz",
+	"filament_id": "OFQ3GEWL",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.35mm nozzle",
+		"FELIX Pro L 3.0 0.35mm nozzle",
+		"FELIX Pro XL 3.0 0.35mm nozzle",
+		"FELIX Tec 4 0.35mm nozzle"
+	],
+	"nozzle_temperature": [
+		"205.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"205.0"
+	],
+	"hot_plate_temp": [
+		"55.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"cool_plate_temp": [
+		"55.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"eng_plate_temp": [
+		"55.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"textured_plate_temp": [
+		"55.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"2.5"
+	],
+	"filament_retract_speed": [
+		"55.0"
+	],
+	"filament_retraction_speed": [
+		"55.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.2"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"40.0"
+	],
+	"fan_max_speed": [
+		"40.0"
+	],
+	"filament_density": [
+		"1.23"
+	],
+	"filament_vendor": [
+		"FORMFUTURA"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FORMFUTURA Aquasolve PVA Hardened Steel @ 0.50mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FORMFUTURA Aquasolve PVA Hardened Steel @ 0.50mm",
+	"inherits": "fdm_filament_pva",
+	"from": "system",
+	"setting_id": "K8AI1KXSsESZvmOI",
+	"filament_id": "OFQ3GEWL",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.50mm nozzle",
+		"FELIX Pro L 3.0 0.50mm nozzle",
+		"FELIX Pro XL 3.0 0.50mm nozzle",
+		"FELIX Tec 4 0.50mm nozzle"
+	],
+	"nozzle_temperature": [
+		"205.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"205.0"
+	],
+	"hot_plate_temp": [
+		"55.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"cool_plate_temp": [
+		"55.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"eng_plate_temp": [
+		"55.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"textured_plate_temp": [
+		"55.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"2.5"
+	],
+	"filament_retract_speed": [
+		"55.0"
+	],
+	"filament_retraction_speed": [
+		"55.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.2"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"40.0"
+	],
+	"fan_max_speed": [
+		"40.0"
+	],
+	"filament_density": [
+		"1.23"
+	],
+	"filament_vendor": [
+		"FORMFUTURA"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FORMFUTURA Aquasolve PVA Hardened Steel @ 0.70mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FORMFUTURA Aquasolve PVA Hardened Steel @ 0.70mm",
+	"inherits": "fdm_filament_pva",
+	"from": "system",
+	"setting_id": "zd6mqKKTLROAclKj",
+	"filament_id": "OFQ3GEWL",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.70mm nozzle",
+		"FELIX Pro L 3.0 0.70mm nozzle",
+		"FELIX Pro XL 3.0 0.70mm nozzle",
+		"FELIX Tec 4 0.70mm nozzle"
+	],
+	"nozzle_temperature": [
+		"205.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"205.0"
+	],
+	"hot_plate_temp": [
+		"55.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"cool_plate_temp": [
+		"55.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"eng_plate_temp": [
+		"55.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"textured_plate_temp": [
+		"55.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"2.5"
+	],
+	"filament_retract_speed": [
+		"55.0"
+	],
+	"filament_retraction_speed": [
+		"55.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.2"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"40.0"
+	],
+	"fan_max_speed": [
+		"40.0"
+	],
+	"filament_density": [
+		"1.23"
+	],
+	"filament_vendor": [
+		"FORMFUTURA"
+	]
+}