Extract Layer::choose_ironing_extruder for unit-testable ironing routing (#13467)

* Extract Layer::choose_ironing_extruder for unit-testable ironing routing

The ironing extruder selection in make_ironing() was a 5-line nested
conditional inlined at the top of the loop, with no isolated test
coverage. Pull the gating into a static helper so the routing decision
is unit-testable without spinning up the slicing pipeline.

Pure refactor: the helper preserves the original logic bit-for-bit
(NoIroning -> -1; AllSolid always enabled; TopSurfaces and TopmostOnly
require some top shells or, in spiral mode, more than one bottom shell;
TopmostOnly additionally requires being on the topmost layer; enabled
ironing routes to solid_infill_filament).

Add tests/fff_print/test_choose_ironing_extruder.cpp covering:
- AllSolid regardless of layer position
- TopSurfaces with top_shell_layers > 0
- TopSurfaces with top_shell_layers=0 + spiral mode + bottom_shell_layers>1
- TopmostOnly + topmost layer
- NoIroning short-circuit
- TopSurfaces with top_shell_layers=0 (and not spiral) -> disabled
- TopSurfaces, spiral, but bottom_shell_layers=1 -> disabled
- TopmostOnly on a non-topmost layer -> disabled

* Move ironing routing test into the Fill subsystem file

Rename the test to tests/libslic3r/test_fill.cpp and tag it [Fill] to
match the subsystem it covers, use flat behavioral test cases with
GENERATE for the parameterized ones, and drop the history narration from
the code comments.

* tests: move ironing routing tests into fff_print/test_fill.cpp

Keeps the Fill tests in one file, alongside the existing ironing
rotation-template test.

src/libslic3r/Fill/Fill.cpp

@@ -1595,6 +1595,25 @@ Polylines Layer::generate_sparse_infill_polylines_for_anchoring(FillAdaptive::Oc
     return sparse_infill_polylines;
 }
 
+// Returns the filament id (1-based) the region is ironed with, or -1 when the
+// region is not ironed. AllSolid always irons. TopSurfaces and TopmostOnly need
+// either some top shells or, in spiral mode, more than one bottom shell, and
+// TopmostOnly additionally needs the layer to be the topmost one.
+int Layer::choose_ironing_extruder(const PrintRegionConfig &cfg,
+                                   bool spiral_mode,
+                                   bool is_topmost_layer)
+{
+    if (cfg.ironing_type == IroningType::NoIroning)
+        return -1;
+    const bool gate = (cfg.ironing_type == IroningType::AllSolid)
+        || ((cfg.top_shell_layers > 0 || (spiral_mode && cfg.bottom_shell_layers > 1))
+            && (cfg.ironing_type == IroningType::TopSurfaces
+                || (cfg.ironing_type == IroningType::TopmostOnly && is_topmost_layer)));
+    if (!gate)
+        return -1;
+    return cfg.top_surface_filament_id;
+}
+
 // Create ironing extrusions over top surfaces.
 void Layer::make_ironing()
 {
@@ -1664,19 +1683,10 @@ void Layer::make_ironing()
 		if (! layerm->slices.empty()) {
 			IroningParams ironing_params;
 			const PrintRegionConfig &config = layerm->region().config();
-			if (config.ironing_type != IroningType::NoIroning &&
-			    (config.ironing_type == IroningType::AllSolid ||
-				    ((config.top_shell_layers > 0 || (this->object()->print()->config().spiral_mode && config.bottom_shell_layers > 1)) &&
-					    (config.ironing_type == IroningType::TopSurfaces ||
-					        (config.ironing_type == IroningType::TopmostOnly && layerm->layer()->upper_layer == nullptr))))) {
-				if (config.outer_wall_filament_id == config.top_surface_filament_id || config.wall_loops == 0) {
-					// Iron the whole face.
-					ironing_params.extruder = config.top_surface_filament_id;
-				} else {
-					// Iron just the infill.
-					ironing_params.extruder = config.top_surface_filament_id;
-				}
-			}
+			ironing_params.extruder = Layer::choose_ironing_extruder(
+				config,
+				/*spiral_mode=*/this->object()->print()->config().spiral_mode,
+				/*is_topmost_layer=*/layerm->layer()->upper_layer == nullptr);
 			if (ironing_params.extruder != -1) {
 				//TODO just_infill is currently not used.
 				ironing_params.just_infill 	= false;

src/libslic3r/Layer.hpp

@@ -16,6 +16,7 @@ using LayerPtrs = std::vector<Layer*>;
 class LayerRegion;
 using LayerRegionPtrs = std::vector<LayerRegion*>;
 class PrintRegion;
+class PrintRegionConfig;
 class PrintObject;
 class Print;
 
@@ -200,6 +201,11 @@ public:
                                                                            FillAdaptive::Octree *support_fill_octree,
                                                                            FillLightning::Generator* lightning_generator) const;
     void 					make_ironing();
+    // Returns the filament id (1-based) the region is ironed with, or -1 when the
+    // region is not ironed.
+    static int              choose_ironing_extruder(const PrintRegionConfig &cfg,
+                                                    bool spiral_mode,
+                                                    bool is_topmost_layer);
     void                    make_contour_z(const sla::IndexedMesh &mesh);
 
     void                    export_region_slices_to_svg(const char *path) const;

src/slic3r/GUI/PublishSettingsDialog.cpp

@@ -1037,9 +1037,6 @@ size_t PublishSettingsDialog::section_group_for(Section kind)
         section.mixed_tabs = new TabCtrl(section.page, wxID_ANY, wxDefaultPosition, wxDefaultSize, s_tab_style);
         section.mixed_tabs->SetFont(Label::Body_14);
         section.mixed_tabs->SetBackgroundColour(GetBackgroundColour());
-        // The mixed tabs carry full swatch compositions: give them a touch more room than the
-        // filament tabs so neighbouring compositions stay distinguishable (must precede AppendItem).
-        section.mixed_tabs->SetItemSpace(FromDIP(3));
         page_sizer->Add(section.mixed_tabs, 0, wxEXPAND | wxTOP, FromDIP(2));
         section.mixed_tabs->Hide();
     }

src/slic3r/GUI/Widgets/Button.cpp

@@ -311,8 +311,11 @@ void Button::render(wxDC& dc)
         }
     }
     auto szContent = textSize;
+    // Whether the measured content reserved the text/icon gap. macOS measures an empty label
+    // as 0-high, so the gap is skipped there; the dot must not advance past it in that case.
+    const bool gap_reserved = szContent.y > 0;
     if (icon.bmp().IsOk()) {
-        if (szContent.y > 0) {
+        if (gap_reserved) {
             //BBS norrow size between text and icon
             if (vertical)
                 szContent.y += spacing;
@@ -357,10 +360,10 @@ void Button::render(wxDC& dc)
         dc.DrawBitmap(icon.bmp(), pt);
         //BBS norrow size between text and icon
         if (vertical) {
-            pt.y += szIcon.y + spacing;
+            pt.y += szIcon.y + (gap_reserved ? spacing : 0);
             pt.x = rcContent.x;
         } else {
-            pt.x += szIcon.x + spacing;
+            pt.x += szIcon.x + (gap_reserved ? spacing : 0);
             pt.y = rcContent.y;
         }
     }

src/slic3r/GUI/Widgets/TabCtrl.cpp

@@ -99,7 +99,7 @@ int TabCtrl::AppendItem(const wxString& item, int image, int selImage, void* cli
     btns.push_back(btn);
     if (btns.size() > 1)
         sizer->GetItem(sizer->GetItemCount() - 1)->SetMinSize({0, 0});
-    sizer->Add(btn, 0, wxALIGN_CENTER_VERTICAL | wxLEFT | wxRIGHT, item_space);
+    sizer->Add(btn, 0, wxALIGN_CENTER_VERTICAL);
     sizer->AddStretchSpacer(1);
     relayout();
     return btns.size() - 1;
@@ -256,12 +256,12 @@ void TabCtrl::relayout()
     int item   = sel + 1;
     int first  = 0;
     for (int i = 0; i < item; ++i)
-        offset += btns[i]->GetMinSize().x + item_space * 2;
+        offset += btns[i]->GetMinSize().x;
     if (item < btns.size())
-        offset += btns[item]->GetMinSize().x + item_space * 2;
+        offset += btns[item]->GetMinSize().x;
     int width = GetSize().x;
     for (int i = 0; i < btns.size(); ++i) {
-        auto size = btns[i]->GetMinSize().x + item_space * 2;
+        auto size = btns[i]->GetMinSize().x;
         if (i < sel && offset > width) {
             sizer->Show(i * 2 + 1, false);
             sizer->Show(i * 2 + 2, false);
@@ -284,26 +284,17 @@ void TabCtrl::relayout()
     if (item >= btns.size())
         --item;
     // Keep spacing 2 ~ 10 TAB_BUTTON_SPACE
-    int b = GetSize().x - offset - 10 - (item + 1 - first) * item_space * 8;
+    int b = GetSize().x - offset - 10 - (item + 1 - first) * 16;
     sizer->GetItem(item * 2 + 2)->SetMinSize({b > 0 ? b : 0, 0});
     Layout();
 }
 
-void TabCtrl::SetItemSpace(int space)
-{
-    if (space < 0 || space == item_space)
-        return;
-    item_space = space;
-    relayout();
-    Refresh();
-}
-
 int TabCtrl::GetFullSize() const
 {
-    // Mirrors relayout(): a 10px leading spacer plus every button's min width and spacing.
+    // Mirrors relayout(): a 10px leading spacer plus every button's min width.
     int width = 10;
     for (const Button* btn : btns)
-        width += btn->GetMinSize().x + item_space * 2;
+        width += btn->GetMinSize().x;
     return width;
 }
 

src/slic3r/GUI/Widgets/TabCtrl.hpp

@@ -14,7 +14,6 @@ class TabCtrl : public StaticBox
 
     int sel = -1;
     wxFont bold;
-    int item_space = 2; // space around each button, both sides (SetItemSpace)
 
 public:
     TabCtrl(wxWindow* parent, wxWindowID id, const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxDefaultSize, long style = 0);
@@ -64,10 +63,6 @@ public:
     int GetNextVisible(int item) const;
     bool IsVisible(unsigned int item) const;
 
-    // Extra space around each tab button (in px on both sides). Defaults to the control-wide
-    // standard; call before appending items so every button picks it up.
-    void SetItemSpace(int space);
-
     int GetFullSize() const;
 
 private:

tests/fff_print/test_fill.cpp

@@ -15,6 +15,7 @@
 #include "libslic3r/Geometry.hpp"
 #include "libslic3r/Layer.hpp"
 #include "libslic3r/Print.hpp"
+#include "libslic3r/PrintConfig.hpp"
 #include "libslic3r/SVG.hpp"
 #include "libslic3r/libslic3r.h"
 
@@ -676,6 +677,73 @@ TEST_CASE("Ironing follows the solid infill rotation template", "[Fill]")
     REQUIRE(compared > int(ironing.size()) / 2);
 }
 
+
+namespace {
+
+PrintRegionConfig ironing_config(IroningType type,
+                                 int top_surface_filament_id = 1,
+                                 int top_shell_layers        = 3,
+                                 int bottom_shell_layers     = 1)
+{
+    PrintRegionConfig cfg;
+    cfg.ironing_type.value            = type;
+    cfg.top_surface_filament_id.value = top_surface_filament_id;
+    cfg.top_shell_layers.value        = top_shell_layers;
+    cfg.bottom_shell_layers.value     = bottom_shell_layers;
+    cfg.outer_wall_filament_id.value  = 1;
+    cfg.wall_loops.value              = 2;
+    return cfg;
+}
+
+} // namespace
+
+TEST_CASE("Ironing an all-solid region uses the top surface filament on every layer", "[Fill]")
+{
+    const PrintRegionConfig cfg = ironing_config(IroningType::AllSolid, /*top_surface_filament_id=*/2);
+    const bool is_topmost_layer = GENERATE(false, true);
+    CAPTURE(is_topmost_layer);
+    REQUIRE(Layer::choose_ironing_extruder(cfg, /*spiral_mode=*/false, is_topmost_layer) == 2);
+}
+
+TEST_CASE("Ironing top surfaces uses the top surface filament when the region has top shells", "[Fill]")
+{
+    const PrintRegionConfig cfg = ironing_config(IroningType::TopSurfaces,
+                                                 /*top_surface_filament_id=*/3,
+                                                 /*top_shell_layers=*/2);
+    REQUIRE(Layer::choose_ironing_extruder(cfg, /*spiral_mode=*/false, /*is_topmost_layer=*/false) == 3);
+}
+
+TEST_CASE("Ironing top surfaces without top shells needs spiral mode and more than one bottom shell", "[Fill]")
+{
+    const PrintRegionConfig one_bottom_shell = ironing_config(IroningType::TopSurfaces,
+                                                              /*top_surface_filament_id=*/1,
+                                                              /*top_shell_layers=*/0,
+                                                              /*bottom_shell_layers=*/1);
+    const PrintRegionConfig two_bottom_shells = ironing_config(IroningType::TopSurfaces,
+                                                               /*top_surface_filament_id=*/1,
+                                                               /*top_shell_layers=*/0,
+                                                               /*bottom_shell_layers=*/2);
+
+    REQUIRE(Layer::choose_ironing_extruder(two_bottom_shells, /*spiral_mode=*/true, /*is_topmost_layer=*/false) == 1);
+    REQUIRE(Layer::choose_ironing_extruder(one_bottom_shell, /*spiral_mode=*/true, /*is_topmost_layer=*/false) == -1);
+    REQUIRE(Layer::choose_ironing_extruder(two_bottom_shells, /*spiral_mode=*/false, /*is_topmost_layer=*/false) == -1);
+}
+
+TEST_CASE("Ironing the topmost surface only applies to the topmost layer", "[Fill]")
+{
+    const PrintRegionConfig cfg = ironing_config(IroningType::TopmostOnly, /*top_surface_filament_id=*/4);
+    REQUIRE(Layer::choose_ironing_extruder(cfg, /*spiral_mode=*/false, /*is_topmost_layer=*/true) == 4);
+    REQUIRE(Layer::choose_ironing_extruder(cfg, /*spiral_mode=*/false, /*is_topmost_layer=*/false) == -1);
+}
+
+TEST_CASE("A region with ironing turned off is never ironed", "[Fill]")
+{
+    const PrintRegionConfig cfg = ironing_config(IroningType::NoIroning);
+    const bool spiral_mode      = GENERATE(false, true);
+    CAPTURE(spiral_mode);
+    REQUIRE(Layer::choose_ironing_extruder(cfg, spiral_mode, /*is_topmost_layer=*/true) == -1);
+}
+
 TEST_CASE("Solid infill direction offsets every layer when no template is set", "[Fill]")
 {
     auto angles_for = [](int direction) {