mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-10-12 10:21:17 +00:00
Compare commits
11
Commits
| Author | SHA1 | Date | |
|---|---|---|---|
 Lam Wei Lun
|
2b736dd268 | ||
|
Lam Wei Lun
|
5dba611eac | ||
|
Lam Wei Lun
|
2feb5f0f9d | ||
|
Lam Wei Lun
|
9c164ca597 | ||
|
Lam Wei Lun
|
00bccf9b2d | ||
|
Šimon
|
70f518d87a | ||
|
Kiss Lorand
|
f4bde2da0a | ||
|
Kris Austin
|
d5a11eb076 | ||
|
Kris Austin
|
461275d9bb | ||
|
HanifKohandraistlin7447
|
95d3e8eafc | ||
|
Kiss Lorand
|
52eeb0f228 |
@@ -569,12 +569,16 @@ on the **first** call. So:
|
||||
#endif
|
||||
```
|
||||
|
||||
**Before GTK starts**, only the environment exists. `CLI::run` (`src/OrcaSlicer.cpp`) branches on
|
||||
`GDK_BACKEND` (an `x11` prefix means the X11 opt-in). On the default path it forces `GDK_BACKEND=x11`
|
||||
when wx lacks EGL and `WAYLAND_DISPLAY` is set. It sets `WEBKIT_DISABLE_COMPOSITING_MODE=1`
|
||||
(non-replacing) only when both `DISPLAY` and `WAYLAND_DISPLAY` are set, and calls `XInitThreads()`
|
||||
**Before GTK starts**, only the environment exists. `CLI::run` (`src/OrcaSlicer.cpp`) sets the NVIDIA
|
||||
DMABUF workaround and then branches on `GDK_BACKEND` (an `x11` prefix means the X11 opt-in). On both
|
||||
paths, when `/proc/driver/nvidia/version` exists and the linked WebKitGTK honours the switch (>= 2.44,
|
||||
`WebView::SupportsForceSharedMemory()`), it sets `WEBKIT_DMABUF_RENDERER_FORCE_SHM=1` and
|
||||
`WEBKIT_FORCE_DMABUF_RENDERER=1` (non-replacing): the proprietary driver cannot back WebKit's hardware
|
||||
DMABUF renderer. On the default path it forces `GDK_BACKEND=x11` when wx lacks EGL and `WAYLAND_DISPLAY`
|
||||
is set. It sets `WEBKIT_DISABLE_COMPOSITING_MODE=1` (non-replacing) only when both `DISPLAY` and
|
||||
`WAYLAND_DISPLAY` are set and the linked WebKitGTK is older than 2.42, and calls `XInitThreads()`
|
||||
only when `DISPLAY` is set. With neither variable set, the GUI refuses to start ("Neither DISPLAY nor
|
||||
WAYLAND_DISPLAY set"). The details and the WebKit rule (c12912e0df) are in
|
||||
WAYLAND_DISPLAY set"). The details and the WebKit rules (c12912e0df) are in
|
||||
`references/webview-gl-aui-media.md` §WebKitGTK on Linux sessions.
|
||||
|
||||
**wx's own detectors**, for reference:
|
||||
|
||||
@@ -61,7 +61,8 @@ available; GTK2/WebKit1 is an opt-out configuration the GUI does not support.
|
||||
11. A web host that re-themes in place handles `EVT_WEBVIEW_RECREATED` without `Skip()`; one that
|
||||
needs a reload lets it through. §[Orca wrapper](#orca-webview-wrapper-widgetswebview)
|
||||
12. Keep `WebViewWebKit`'s destructor removing the `"wx"` handler. §[Orca wrapper](#orca-webview-wrapper-widgetswebview)
|
||||
13. Do not widen `WEBKIT_DISABLE_COMPOSITING_MODE` beyond Orca's default-path XWayland case, and never
|
||||
13. Do not widen `WEBKIT_DISABLE_COMPOSITING_MODE` beyond Orca's default-path XWayland case for
|
||||
WebKitGTK older than 2.42, and never
|
||||
make a page's progress depend only on a C++→JS callback. §[WebKitGTK on Linux](#webkitgtk-on-linux-sessions)
|
||||
14. GL attribute lists: legacy `int[]` lists end with `0` and spell out `WX_GL_RGBA` and
|
||||
`WX_GL_DOUBLEBUFFER`; `wxGLAttributes`/`wxGLContextAttrs` end with `EndList()`; MSAA is requested
|
||||
@@ -567,33 +568,66 @@ vue-resize workaround script and sets a persistent SQLite cookie store on the vi
|
||||
## WebKitGTK on Linux sessions
|
||||
|
||||
**Mechanism.** `CLI::run` (`src/OrcaSlicer.cpp`, under `#ifdef __WXGTK__`, before GTK initialises)
|
||||
branches on `GDK_BACKEND`:
|
||||
sets the NVIDIA DMABUF workaround and then branches on `GDK_BACKEND`:
|
||||
- **Both paths**, before the split: when `/proc/driver/nvidia/version` exists and the linked WebKitGTK
|
||||
honours the switch (>= 2.44, `WebView::SupportsForceSharedMemory()`), it sets
|
||||
`WEBKIT_DMABUF_RENDERER_FORCE_SHM=1` and `WEBKIT_FORCE_DMABUF_RENDERER=1` non-replacing. The
|
||||
proprietary driver cannot back WebKit's hardware DMABUF renderer, so the shared-memory transport keeps
|
||||
accelerated compositing instead of dropping it; `WEBKIT_FORCE_DMABUF_RENDERER` clears the
|
||||
Debian/Ubuntu/openSUSE `isNVIDIA()` early return, which otherwise returns before the FORCE_SHM check.
|
||||
- **Default path** (`GDK_BACKEND` unset or not starting with `x11`): if wx lacks EGL (`!wxHAS_EGL`) and
|
||||
`WAYLAND_DISPLAY` is set, it forces `GDK_BACKEND=x11`; it sets `WEBKIT_DISABLE_COMPOSITING_MODE=1`
|
||||
non-replacing **only** when both `DISPLAY` and `WAYLAND_DISPLAY` are non-empty (a Wayland session with
|
||||
non-replacing **only** when the linked WebKitGTK predates 2.42 (`WebView::NeedsCompositingWorkaround()`)
|
||||
**and** both `DISPLAY` and `WAYLAND_DISPLAY` are non-empty (a Wayland session with
|
||||
XWayland available — the session, not the backend GTK will pick); `XInitThreads()` runs only when
|
||||
`DISPLAY` is set.
|
||||
- **`GDK_BACKEND=x11…` opt-in path**: sets `DRI_PRIME=1` (and the NVIDIA PRIME variables when
|
||||
`/proc/driver/nvidia/version` exists), calls `XInitThreads()`, and deliberately does **not** disable
|
||||
compositing (the comment: the WebKit2GTK XWayland bug appears fixed in WebKit2GTK ≥ 2.42, and leaving
|
||||
compositing on keeps hardware acceleration for Device / Setup Wizard / login pages).
|
||||
compositing, which keeps hardware acceleration for Device / Setup Wizard / login pages.
|
||||
|
||||
Runtime backend detection elsewhere uses Orca's `is_running_on_wayland()` / `is_running_on_x11()`
|
||||
(see `references/platforms.md`), not these environment variables.
|
||||
|
||||
**Pitfall.**
|
||||
- **Rule:** On NVIDIA reach for `WEBKIT_DMABUF_RENDERER_FORCE_SHM` before
|
||||
`WEBKIT_DISABLE_COMPOSITING_MODE`. **Why:** the proprietary driver cannot back WebKit's hardware
|
||||
DMABUF renderer, leaving web views blank or slow; FORCE_SHM keeps accelerated compositing and only
|
||||
skips the hardware path, while disabling compositing drops it. Threaded scrolling is a separate,
|
||||
release-dependent default (off in 2.44/2.45, on from 2.46). `WEBKIT_DISABLE_DMABUF_RENDERER` is not a
|
||||
substitute — it is read first, leaves the transport set empty (no compositing from 2.44 on, where the
|
||||
X11/Wayland fallback renderers were removed) and has a reported crash path. On Debian/Ubuntu and
|
||||
openSUSE the `isNVIDIA()` patch returns before the FORCE_SHM check, so `WEBKIT_FORCE_DMABUF_RENDERER=1`
|
||||
must clear it first; that variable exists only in those patches. WebKit reads all of these once per
|
||||
process, before the first WebView.
|
||||
The test is `/proc/driver/nvidia/version`, so a hybrid laptop that renders on its iGPU also takes the
|
||||
shared-memory path, which is a per-frame GPU readback rather than zero-copy; exporting
|
||||
`WEBKIT_DMABUF_RENDERER_FORCE_SHM=0` in the environment restores the hardware path.
|
||||
```cpp
|
||||
// Wrong: kills compositing and threaded scrolling (and can crash on modern WebKit)
|
||||
::setenv("WEBKIT_DISABLE_DMABUF_RENDERER", "1", false);
|
||||
// Right: keep compositing, skip only the hardware DMABUF path
|
||||
if (::access("/proc/driver/nvidia/version", F_OK) == 0 && WebView::SupportsForceSharedMemory()) {
|
||||
::setenv("WEBKIT_DMABUF_RENDERER_FORCE_SHM", "1", /*replace*/ false);
|
||||
::setenv("WEBKIT_FORCE_DMABUF_RENDERER", "1", /*replace*/ false);
|
||||
}
|
||||
```
|
||||
Cite: WebKit 2.52.6 `Source/WebKit/UIProcess/gtk/AcceleratedBackingStore.cpp`
|
||||
(`rendererBufferTransportMode()`), Debian `disable-nvidia-dmabuf.patch`, WebKit bug 262607.
|
||||
- **Rule:** Set `WEBKIT_DISABLE_COMPOSITING_MODE` only on the default path in Wayland sessions,
|
||||
non-replacing (`setenv(..., false)`, so a value the user already exported wins), before GTK
|
||||
initialises; never unconditionally. Keep JS-side fallbacks so a page never
|
||||
initialises; never unconditionally, and only for the WebKitGTK releases that need it (older than
|
||||
2.42, `WebView::NeedsCompositingWorkaround()`). Keep JS-side fallbacks so a page never
|
||||
waits forever for a C++→JS call.
|
||||
**Why:** WebKit2GTK accelerated compositing could fail silently under XWayland, leaving web views
|
||||
blank (Setup Wizard stuck on "Loading..."); disabling it everywhere needlessly drops hardware
|
||||
acceleration; without the JS timeout the user is stuck when the signal is lost.
|
||||
**Why:** WebKit2GTK accelerated compositing could fail silently under XWayland before 2.42, leaving
|
||||
web views blank (Setup Wizard stuck on "Loading..."); the variable also turns off threaded scrolling,
|
||||
so applying it on a newer WebKit needlessly drops both GPU compositing and async scrolling (the
|
||||
Device tab loses its smoothness); without the JS timeout the user is stuck when the signal is lost.
|
||||
```cpp
|
||||
// Wrong: unconditional, kills HW acceleration everywhere
|
||||
::setenv("WEBKIT_DISABLE_COMPOSITING_MODE", "1", false);
|
||||
// Right (default path only): non-replacing, before GTK init, Wayland session with XWayland
|
||||
if (display && *display && wayland && *wayland)
|
||||
// Right (default path only): non-replacing, before GTK init, WebKitGTK < 2.42,
|
||||
// Wayland session with XWayland
|
||||
if (WebView::NeedsCompositingWorkaround() && display && *display && wayland && *wayland)
|
||||
::setenv("WEBKIT_DISABLE_COMPOSITING_MODE", "1", /*replace*/ false);
|
||||
```
|
||||
Cite: c12912e0df (`src/OrcaSlicer.cpp`; `resources/web/guide/0/load.js` `OnInit`
|
||||
|
||||
@@ -7,6 +7,7 @@ on:
|
||||
- release/*
|
||||
paths:
|
||||
- 'deps/**'
|
||||
- 'deps_src/**'
|
||||
- 'src/**'
|
||||
- '**/CMakeLists.txt'
|
||||
- 'version.inc'
|
||||
@@ -14,8 +15,10 @@ on:
|
||||
- 'resources/**'
|
||||
- ".github/workflows/build_*.yml"
|
||||
- ".github/workflows/unit_tests*.yml"
|
||||
- 'build_linux.sh'
|
||||
- 'build_win.bat'
|
||||
- 'scripts/test_build_win.ps1'
|
||||
- 'build_release_macos.sh'
|
||||
- 'scripts/build_preset_cache.*'
|
||||
- 'scripts/flatpak/**'
|
||||
- 'scripts/msix/**'
|
||||
@@ -54,7 +57,9 @@ on:
|
||||
default: false
|
||||
|
||||
concurrency:
|
||||
group: ${{ github.workflow }}-${{ github.event_name }}-${{ github.event.pull_request.number || github.ref }}
|
||||
# cancel_closed_pr_builds.yml joins this group by name, so update that file
|
||||
# with any change here.
|
||||
group: build-all-${{ github.event_name }}-${{ github.event.pull_request.number || github.ref }}
|
||||
# Pushes don't cancel a running build, because only a finished branch build
|
||||
# saves caches every pull request can restore.
|
||||
cancel-in-progress: ${{ github.event_name == 'pull_request' }}
|
||||
|
||||
@@ -1,73 +1,198 @@
|
||||
name: Check Cache
|
||||
|
||||
on:
|
||||
workflow_call:
|
||||
inputs:
|
||||
os:
|
||||
required: true
|
||||
type: string
|
||||
arch:
|
||||
required: false
|
||||
type: string
|
||||
compiler:
|
||||
required: false
|
||||
type: string
|
||||
default: msvc
|
||||
build-deps-only:
|
||||
required: false
|
||||
type: boolean
|
||||
force-build:
|
||||
required: false
|
||||
type: boolean
|
||||
|
||||
jobs:
|
||||
check_cache: # determines if there is a cache and outputs variables used in caching process
|
||||
name: Check Cache
|
||||
runs-on: ${{ inputs.os }}
|
||||
outputs:
|
||||
cache-key: ${{ steps.set_outputs.outputs.cache-key }}
|
||||
cache-path: ${{ steps.set_outputs.outputs.cache-path }}
|
||||
valid-cache: ${{ steps.cache_deps.outputs.cache-hit }}
|
||||
steps:
|
||||
- name: Checkout
|
||||
uses: actions/checkout@v7
|
||||
with:
|
||||
lfs: 'false'
|
||||
|
||||
- name: set outputs
|
||||
id: set_outputs
|
||||
env:
|
||||
# Anything that changes how the tree is built belongs in the key, or a job
|
||||
# restores one it cannot use. Linux amd64 passes no arch deliberately, so
|
||||
# 'linux-clang' keeps the cache it already has.
|
||||
cache-os: ${{ runner.os == 'macOS' && format('{0}-{1}', inputs.os, inputs.arch) || (runner.os == 'Windows' && format('windows-{0}-{1}', inputs.arch, inputs.compiler) || format('linux-clang{0}', inputs.arch && format('-{0}', inputs.arch) || '')) }}
|
||||
# The Windows ARM64 deps build in build-arm64, all others under build;
|
||||
# build_deps.yml and build_orca.yml pass the Windows directory to build_win.bat.
|
||||
dep-folder-name: ${{ runner.os == 'macOS' && format('/{0}', inputs.arch) || (runner.os == 'Windows' && inputs.arch == 'arm64') && '-arm64/OrcaSlicer_dep' || '/OrcaSlicer_dep' }}
|
||||
output-cmd: ${{ runner.os == 'Windows' && '$env:GITHUB_OUTPUT' || '"$GITHUB_OUTPUT"'}}
|
||||
run: |
|
||||
echo cache-key=${{ env.cache-os }}-cache-orcaslicer_deps-build-${{ hashFiles('deps/**') }} >> ${{ env.output-cmd }}
|
||||
echo cache-path=${{ github.workspace }}/deps/build${{ env.dep-folder-name }} >> ${{ env.output-cmd }}
|
||||
|
||||
- name: load cache
|
||||
id: cache_deps
|
||||
uses: actions/cache@v6
|
||||
with:
|
||||
path: ${{ steps.set_outputs.outputs.cache-path }}
|
||||
key: ${{ steps.set_outputs.outputs.cache-key }}
|
||||
lookup-only: true
|
||||
|
||||
build_deps: # call next step
|
||||
name: Build Deps
|
||||
needs: [check_cache]
|
||||
uses: ./.github/workflows/build_deps.yml
|
||||
with:
|
||||
cache-key: ${{ needs.check_cache.outputs.cache-key }}
|
||||
cache-path: ${{ needs.check_cache.outputs.cache-path }}
|
||||
valid-cache: ${{ needs.check_cache.outputs.valid-cache == 'true' }}
|
||||
os: ${{ inputs.os }}
|
||||
arch: ${{ inputs.arch }}
|
||||
compiler: ${{ inputs.compiler }}
|
||||
build-deps-only: ${{ inputs.build-deps-only }}
|
||||
force-build: ${{ inputs.force-build }}
|
||||
secrets: inherit
|
||||
name: Check Cache
|
||||
|
||||
on:
|
||||
workflow_call:
|
||||
inputs:
|
||||
os:
|
||||
required: true
|
||||
type: string
|
||||
arch:
|
||||
required: false
|
||||
type: string
|
||||
compiler:
|
||||
required: false
|
||||
type: string
|
||||
default: msvc
|
||||
build-deps-only:
|
||||
required: false
|
||||
type: boolean
|
||||
force-build:
|
||||
required: false
|
||||
type: boolean
|
||||
|
||||
# Read by scripts/ci_deps_cache.sh.
|
||||
env:
|
||||
REPO: ${{ github.repository }}
|
||||
WORKFLOW_REF: ${{ github.workflow_ref }}
|
||||
BASE_REF: ${{ github.base_ref }}
|
||||
|
||||
jobs:
|
||||
check_cache: # determines if there is a cache and outputs variables used in caching process
|
||||
name: Check Cache
|
||||
# Hosted macOS runners are scarce, so their lookup runs on Linux.
|
||||
runs-on: ${{ startsWith(inputs.os, 'macos-') && 'ubuntu-24.04' || inputs.os }}
|
||||
outputs:
|
||||
cache-key: ${{ steps.set_outputs.outputs.cache-key }}
|
||||
cache-path: ${{ steps.set_outputs.outputs.cache-path }}
|
||||
valid-cache: ${{ steps.cache_deps.outputs.cache-hit }}
|
||||
macos-path: ${{ steps.macos_path.outputs.path }}
|
||||
key-inputs: ${{ steps.wait_check.outputs.key-inputs }}
|
||||
wait-for: ${{ steps.wait_check.outputs.wait-for }}
|
||||
wait-since: ${{ steps.wait_check.outputs.wait-since }}
|
||||
steps:
|
||||
- name: Checkout
|
||||
uses: actions/checkout@v7
|
||||
with:
|
||||
lfs: 'false'
|
||||
# The wait check compares the merge commit with its first parent.
|
||||
fetch-depth: ${{ startsWith(inputs.os, 'macos-') && 2 || 1 }}
|
||||
# Fetches only deps/, which the key hashes, and the wait script.
|
||||
sparse-checkout: |
|
||||
/deps/
|
||||
/scripts/ci_deps_cache.sh
|
||||
sparse-checkout-cone-mode: false
|
||||
|
||||
- name: set outputs
|
||||
id: set_outputs
|
||||
env:
|
||||
# Anything that changes how the tree is built belongs in the key, or a job
|
||||
# restores one it cannot use. Linux amd64 passes no arch deliberately, so
|
||||
# 'linux-clang' keeps the cache it already has.
|
||||
cache-os: ${{ (runner.os == 'macOS' || startsWith(inputs.os, 'macos-')) && format('{0}-{1}', inputs.os, inputs.arch) || (runner.os == 'Windows' && format('windows-{0}-{1}', inputs.arch, inputs.compiler) || format('linux-clang{0}', inputs.arch && format('-{0}', inputs.arch) || '')) }}
|
||||
# The Windows ARM64 deps build in build-arm64, all others under build;
|
||||
# build_deps.yml and build_orca.yml pass the Windows directory to build_win.bat.
|
||||
dep-folder-name: ${{ (runner.os == 'macOS' || startsWith(inputs.os, 'macos-')) && format('/{0}', inputs.arch) || (runner.os == 'Windows' && inputs.arch == 'arm64') && '-arm64/OrcaSlicer_dep' || '/OrcaSlicer_dep' }}
|
||||
output-cmd: ${{ runner.os == 'Windows' && '$env:GITHUB_OUTPUT' || '"$GITHUB_OUTPUT"'}}
|
||||
run: |
|
||||
echo cache-key=${{ env.cache-os }}-cache-orcaslicer_deps-build-${{ hashFiles('deps/**') }} >> ${{ env.output-cmd }}
|
||||
# Relative to the workspace, which differs from the build's when this job runs on Linux.
|
||||
echo cache-path=deps/build${{ env.dep-folder-name }} >> ${{ env.output-cmd }}
|
||||
|
||||
# actions/cache matches the path too, so a Linux lookup for macOS uses the
|
||||
# workspace of a hosted macOS job.
|
||||
- name: macOS cache path
|
||||
id: macos_path
|
||||
if: ${{ startsWith(inputs.os, 'macos-') }}
|
||||
run: echo "path=/Users/runner/work/${GITHUB_REPOSITORY#*/}/${GITHUB_REPOSITORY#*/}/${{ steps.set_outputs.outputs.cache-path }}" >> "$GITHUB_OUTPUT"
|
||||
|
||||
- name: load cache
|
||||
id: cache_deps
|
||||
uses: actions/cache@v6
|
||||
with:
|
||||
path: ${{ steps.macos_path.outputs.path || format('{0}/{1}', github.workspace, steps.set_outputs.outputs.cache-path) }}
|
||||
key: ${{ steps.set_outputs.outputs.cache-key }}
|
||||
lookup-only: true
|
||||
|
||||
# A pull request that misses the cache can wait for a base branch build of the same deps.
|
||||
- name: check for a base branch build to wait for
|
||||
id: wait_check
|
||||
if: ${{ startsWith(inputs.os, 'macos-') && github.event_name == 'pull_request' && steps.cache_deps.outputs.cache-hit != 'true' }}
|
||||
env:
|
||||
GH_TOKEN: ${{ github.token }}
|
||||
run: bash scripts/ci_deps_cache.sh check
|
||||
|
||||
wait_for_deps:
|
||||
name: Wait for base branch deps
|
||||
needs: [check_cache]
|
||||
if: ${{ needs.check_cache.outputs.wait-for != '' }}
|
||||
runs-on: ubuntu-24.04
|
||||
env:
|
||||
WAIT_MINUTES: 120
|
||||
# Must exceed WAIT_MINUTES.
|
||||
timeout-minutes: 130
|
||||
# Waiting runs queue here, and only the first one holds a runner.
|
||||
concurrency:
|
||||
group: deps-wait-${{ github.base_ref }}-${{ needs.check_cache.outputs.cache-key }}
|
||||
queue: max
|
||||
outputs:
|
||||
hit: ${{ steps.lookup.outputs.cache-hit }}
|
||||
steps:
|
||||
- name: Checkout
|
||||
uses: actions/checkout@v7
|
||||
with:
|
||||
sparse-checkout: scripts/ci_deps_cache.sh
|
||||
sparse-checkout-cone-mode: false
|
||||
|
||||
- name: wait for the deps cache
|
||||
env:
|
||||
GH_TOKEN: ${{ github.token }}
|
||||
KEY: ${{ needs.check_cache.outputs.cache-key }}
|
||||
KEY_INPUTS: ${{ needs.check_cache.outputs.key-inputs }}
|
||||
WAIT_FOR: ${{ needs.check_cache.outputs.wait-for }}
|
||||
WAIT_SINCE: ${{ needs.check_cache.outputs.wait-since }}
|
||||
ARCH: ${{ inputs.arch }}
|
||||
run: bash scripts/ci_deps_cache.sh wait
|
||||
|
||||
- name: load cache
|
||||
id: lookup
|
||||
uses: actions/cache@v6
|
||||
with:
|
||||
path: ${{ needs.check_cache.outputs.macos-path }}
|
||||
key: ${{ needs.check_cache.outputs.cache-key }}
|
||||
lookup-only: true
|
||||
|
||||
# Hosted macOS runners are scarce, so a pull request's macOS build waits until
|
||||
# one is free that push and nightly builds do not need. See the script.
|
||||
macos_admission:
|
||||
name: Wait for a macOS runner
|
||||
needs: [check_cache, wait_for_deps]
|
||||
if: ${{ !cancelled() && needs.check_cache.result == 'success' && startsWith(inputs.os, 'macos-') && github.event_name == 'pull_request' && !contains(github.event.pull_request.labels.*.name, 'macos-priority') }}
|
||||
runs-on: ubuntu-24.04
|
||||
env:
|
||||
WAIT_MINUTES: 240
|
||||
PRIORITY: false
|
||||
# Must exceed WAIT_MINUTES.
|
||||
timeout-minutes: 250
|
||||
# One line for every arch of every pull request, and only its first job polls.
|
||||
concurrency:
|
||||
group: macos-admission
|
||||
queue: max
|
||||
steps: &macos_admission_steps
|
||||
- name: Checkout
|
||||
uses: actions/checkout@v7
|
||||
with:
|
||||
sparse-checkout: scripts/ci_macos_admission.py
|
||||
sparse-checkout-cone-mode: false
|
||||
|
||||
- name: wait for a macOS runner
|
||||
env:
|
||||
GH_TOKEN: ${{ github.token }}
|
||||
MACOS_RUNNER_LIMIT: ${{ vars.MACOS_RUNNER_LIMIT }}
|
||||
# -u, or the log shows nothing until the wait ends.
|
||||
run: python3 -u scripts/ci_macos_admission.py
|
||||
|
||||
# The macos-priority label, when the run starts, puts a pull request in its own
|
||||
# line, which the normal one yields to. The names are fixed, because a skipped
|
||||
# job is listed under its unevaluated name, and the script matches both.
|
||||
macos_admission_priority:
|
||||
name: Wait for a macOS runner (priority)
|
||||
needs: [check_cache, wait_for_deps]
|
||||
if: ${{ !cancelled() && needs.check_cache.result == 'success' && startsWith(inputs.os, 'macos-') && github.event_name == 'pull_request' && contains(github.event.pull_request.labels.*.name, 'macos-priority') }}
|
||||
runs-on: ubuntu-24.04
|
||||
env:
|
||||
WAIT_MINUTES: 240
|
||||
PRIORITY: true
|
||||
# Must exceed WAIT_MINUTES.
|
||||
timeout-minutes: 250
|
||||
concurrency:
|
||||
group: macos-admission-priority
|
||||
queue: max
|
||||
steps: *macos_admission_steps
|
||||
|
||||
build_deps: # call next step
|
||||
name: Build Deps
|
||||
needs: [check_cache, wait_for_deps, macos_admission, macos_admission_priority]
|
||||
# A failed wait counts as no cache, so the deps are built here. A failed
|
||||
# admission still builds rather than skip macOS.
|
||||
if: ${{ !cancelled() && needs.check_cache.result == 'success' }}
|
||||
uses: ./.github/workflows/build_deps.yml
|
||||
with:
|
||||
cache-key: ${{ needs.check_cache.outputs.cache-key }}
|
||||
cache-path: ${{ needs.check_cache.outputs.cache-path }}
|
||||
valid-cache: ${{ needs.check_cache.outputs.valid-cache == 'true' || needs.wait_for_deps.outputs.hit == 'true' }}
|
||||
os: ${{ inputs.os }}
|
||||
arch: ${{ inputs.arch }}
|
||||
compiler: ${{ inputs.compiler }}
|
||||
build-deps-only: ${{ inputs.build-deps-only }}
|
||||
force-build: ${{ inputs.force-build }}
|
||||
secrets: inherit
|
||||
|
||||
@@ -45,7 +45,7 @@ jobs:
|
||||
- name: load cached deps
|
||||
uses: actions/cache@v6
|
||||
with:
|
||||
path: ${{ inputs.cache-path }}
|
||||
path: ${{ github.workspace }}/${{ inputs.cache-path }}
|
||||
key: ${{ inputs.cache-key }}
|
||||
|
||||
- uses: lukka/get-cmake@latest
|
||||
@@ -122,7 +122,7 @@ jobs:
|
||||
choco install strawberryperl
|
||||
}
|
||||
# cache-path is the install directory inside the deps build directory.
|
||||
$deps = (Split-Path "${{ inputs.cache-path }}").Replace('\', '/')
|
||||
$deps = (Split-Path "${{ github.workspace }}/${{ inputs.cache-path }}").Replace('\', '/')
|
||||
# -l compiles with Visual Studio's clang-cl and -x builds with Ninja; --msvc --msbuild is cl under the Visual Studio generator.
|
||||
$flags = if ("${{ inputs.compiler }}" -eq "clang") { "-l", "-x" } else { "--msvc", "--msbuild" }
|
||||
.\build_win.bat -d --arch ${{ inputs.arch }} --deps-dir $deps @flags
|
||||
|
||||
@@ -44,7 +44,7 @@ jobs:
|
||||
if: ${{ !(runner.os == 'macOS' && inputs.macos-combine-only) }}
|
||||
uses: actions/cache@v6
|
||||
with:
|
||||
path: ${{ inputs.cache-path }}
|
||||
path: ${{ github.workspace }}/${{ inputs.cache-path }}
|
||||
key: ${{ inputs.cache-key }}
|
||||
fail-on-cache-miss: true
|
||||
|
||||
@@ -467,7 +467,7 @@ jobs:
|
||||
# --tests builds the unit tests too; the unit_tests_windows_* jobs run them.
|
||||
run: |
|
||||
# cache-path is the install directory inside the deps build directory.
|
||||
$deps = (Split-Path "${{ inputs.cache-path }}").Replace('\', '/')
|
||||
$deps = (Split-Path "${{ github.workspace }}/${{ inputs.cache-path }}").Replace('\', '/')
|
||||
# -l compiles with Visual Studio's clang-cl and -x builds with Ninja; --msvc --msbuild is cl under the Visual Studio generator.
|
||||
$flags = if ("${{ inputs.compiler }}" -eq "clang") { "-l", "-x" } else { "--msvc", "--msbuild" }
|
||||
.\build_win.bat -s --tests -i --arch ${{ inputs.arch }} --build-dir $env:BUILD_DIR --deps-dir $deps @flags
|
||||
|
||||
@@ -0,0 +1,21 @@
|
||||
name: Cancel builds of closed pull requests
|
||||
|
||||
on:
|
||||
# pull_request_target needs no approval for first-time contributors and must never
|
||||
# check out pull request code.
|
||||
pull_request_target:
|
||||
types:
|
||||
- closed
|
||||
|
||||
permissions: {}
|
||||
|
||||
jobs:
|
||||
cancel:
|
||||
# Matches the concurrency group in build_all.yml, so joining it cancels the pull
|
||||
# request's unfinished Build all run.
|
||||
concurrency:
|
||||
group: build-all-pull_request-${{ github.event.pull_request.number }}
|
||||
cancel-in-progress: true
|
||||
runs-on: ubuntu-latest
|
||||
steps:
|
||||
- run: echo "Joined concurrency group build-all-pull_request-${{ github.event.pull_request.number }}."
|
||||
@@ -16,8 +16,6 @@ on:
|
||||
|
||||
permissions:
|
||||
contents: read
|
||||
# Listing caches while waiting for this PR's deps cache.
|
||||
actions: read
|
||||
|
||||
concurrency:
|
||||
group: ${{ github.workflow }}-${{ github.event.pull_request.number }}
|
||||
@@ -37,7 +35,7 @@ jobs:
|
||||
# The PR merge commit plus its first parent, the base it is diffed against.
|
||||
fetch-depth: 2
|
||||
|
||||
- name: Look for changed files
|
||||
- name: Look for changed C++ files
|
||||
id: changes
|
||||
run: |
|
||||
if git -c core.quotePath=false diff --name-only HEAD^1 -- src tests | grep -qE '\.(cpp|cc|cxx|hpp|h|hxx)$'; then
|
||||
@@ -45,68 +43,18 @@ jobs:
|
||||
else
|
||||
echo "No C++ changes under src/ or tests/."
|
||||
fi
|
||||
if ! git diff --quiet HEAD^1 -- deps; then
|
||||
echo "deps=true" >> "$GITHUB_OUTPUT"
|
||||
fi
|
||||
echo "deps-key=linux-clang-cache-orcaslicer_deps-build-${{ hashFiles('deps/**') }}" >> "$GITHUB_OUTPUT"
|
||||
|
||||
# Parsing needs the dependency headers, not a build of this PR's deps/.
|
||||
# Without an exact match the job falls back to the newest cache main has,
|
||||
# unless the PR changes deps/: its code may need the new headers, so the
|
||||
# job waits for the cache this PR's Linux Build Deps job saves.
|
||||
# Parsing needs the dependency headers, not a build of this PR's deps/, so
|
||||
# a PR that changes deps/ falls back to the newest cache main has.
|
||||
- name: Restore cached deps
|
||||
id: deps_cache
|
||||
if: steps.changes.outputs.cpp == 'true'
|
||||
uses: actions/cache/restore@v6
|
||||
with:
|
||||
path: ${{ github.workspace }}/deps/build/OrcaSlicer_dep
|
||||
key: ${{ steps.changes.outputs.deps-key }}
|
||||
|
||||
- name: Restore the newest cached deps
|
||||
if: steps.changes.outputs.cpp == 'true' && steps.deps_cache.outputs.cache-hit != 'true' && steps.changes.outputs.deps != 'true'
|
||||
uses: actions/cache/restore@v6
|
||||
with:
|
||||
path: ${{ github.workspace }}/deps/build/OrcaSlicer_dep
|
||||
key: ${{ steps.changes.outputs.deps-key }}
|
||||
key: linux-clang-cache-orcaslicer_deps-build-${{ hashFiles('deps/**') }}
|
||||
restore-keys: linux-clang-cache-orcaslicer_deps-build-
|
||||
fail-on-cache-miss: true
|
||||
|
||||
# Linux Build Deps takes about 35 minutes on GitHub-hosted runners. A
|
||||
# failing lookup is retried a few times, then fails the job instead of
|
||||
# waiting out the deadline.
|
||||
- name: Wait for this PR's deps cache
|
||||
if: steps.changes.outputs.cpp == 'true' && steps.deps_cache.outputs.cache-hit != 'true' && steps.changes.outputs.deps == 'true'
|
||||
timeout-minutes: 100
|
||||
env:
|
||||
GH_TOKEN: ${{ github.token }}
|
||||
KEY: ${{ steps.changes.outputs.deps-key }}
|
||||
run: |
|
||||
deadline=$((SECONDS + 90 * 60))
|
||||
failures=0
|
||||
while true; do
|
||||
if found=$(gh cache list --repo "$GITHUB_REPOSITORY" --ref "$GITHUB_REF" --key "$KEY" --json key --jq ".[] | select(.key == \"$KEY\") | .key"); then
|
||||
[ -n "$found" ] && break
|
||||
failures=0
|
||||
elif [ $((++failures)) -ge 3 ]; then
|
||||
echo "::error::Listing caches failed 3 times in a row."
|
||||
exit 1
|
||||
fi
|
||||
if [ "$SECONDS" -ge "$deadline" ]; then
|
||||
echo "::error::No deps cache $KEY after 90 minutes. Check the Linux Build Deps job, then rerun clang-tidy."
|
||||
exit 1
|
||||
fi
|
||||
echo "Waiting for $KEY..."
|
||||
sleep 60
|
||||
done
|
||||
|
||||
- name: Restore this PR's deps cache
|
||||
if: steps.changes.outputs.cpp == 'true' && steps.deps_cache.outputs.cache-hit != 'true' && steps.changes.outputs.deps == 'true'
|
||||
uses: actions/cache/restore@v6
|
||||
with:
|
||||
path: ${{ github.workspace }}/deps/build/OrcaSlicer_dep
|
||||
key: ${{ steps.changes.outputs.deps-key }}
|
||||
fail-on-cache-miss: true
|
||||
|
||||
- name: Apt-Install Dependencies
|
||||
if: steps.changes.outputs.cpp == 'true' && !vars.SELF_HOSTED
|
||||
uses: ./.github/actions/apt-install-deps
|
||||
|
||||
@@ -0,0 +1,790 @@
|
||||
{
|
||||
"name": "FELIX Printers",
|
||||
"version": "1.0.0",
|
||||
"force_update": "0",
|
||||
"description": "Configuration file for printers by FELIX Printers",
|
||||
"machine_model_list": [
|
||||
{
|
||||
"name": "FELIX Food Double",
|
||||
"sub_path": "machine/FELIX Food Double.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Food Single",
|
||||
"sub_path": "machine/FELIX Food Single.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Food Switch",
|
||||
"sub_path": "machine/FELIX Food Switch.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Pro 3",
|
||||
"sub_path": "machine/FELIX Pro 3.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Pro L 3.0",
|
||||
"sub_path": "machine/FELIX Pro L 3.0.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Pro XL 3.0",
|
||||
"sub_path": "machine/FELIX Pro XL 3.0.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Tec 4",
|
||||
"sub_path": "machine/FELIX Tec 4.json"
|
||||
}
|
||||
],
|
||||
"machine_list": [
|
||||
{
|
||||
"name": "fdm_all_machines_common",
|
||||
"sub_path": "machine/fdm_all_machines_common.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_felix_food_common",
|
||||
"sub_path": "machine/fdm_felix_food_common.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_felix_food_double_common",
|
||||
"sub_path": "machine/fdm_felix_food_double_common.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_felix_food_switch_common",
|
||||
"sub_path": "machine/fdm_felix_food_switch_common.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_felix_plastic_common",
|
||||
"sub_path": "machine/fdm_felix_plastic_common.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_felix_pro_3_common",
|
||||
"sub_path": "machine/fdm_felix_pro_3_common.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_felix_pro_l_3_common",
|
||||
"sub_path": "machine/fdm_felix_pro_l_3.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_felix_pro_xl_3_common",
|
||||
"sub_path": "machine/fdm_felix_pro_xl_3_common.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_felix_tec_common",
|
||||
"sub_path": "machine/fdm_felix_tec_common.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Food Single 0.50mm nozzle",
|
||||
"sub_path": "machine/FELIX Food Single 0.50mm nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Food Single 1.00mm nozzle",
|
||||
"sub_path": "machine/FELIX Food Single 1.00mm nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Food Single 2.00mm nozzle",
|
||||
"sub_path": "machine/FELIX Food Single 2.00mm nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Food Single 3.00mm nozzle",
|
||||
"sub_path": "machine/FELIX Food Single 3.00mm nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Food Single 4.00mm nozzle",
|
||||
"sub_path": "machine/FELIX Food Single 4.00mm nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Food Double 0.50mm nozzle",
|
||||
"sub_path": "machine/FELIX Food Double 0.50mm nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Food Double 1.00mm nozzle",
|
||||
"sub_path": "machine/FELIX Food Double 1.00mm nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Food Double 2.00mm nozzle",
|
||||
"sub_path": "machine/FELIX Food Double 2.00mm nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Food Double 3.00mm nozzle",
|
||||
"sub_path": "machine/FELIX Food Double 3.00mm nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Food Double 4.00mm nozzle",
|
||||
"sub_path": "machine/FELIX Food Double 4.00mm nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Food Switch 0.50mm nozzle",
|
||||
"sub_path": "machine/FELIX Food Switch 0.50mm nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Food Switch 1.00mm nozzle",
|
||||
"sub_path": "machine/FELIX Food Switch 1.00mm nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Food Switch 2.00mm nozzle",
|
||||
"sub_path": "machine/FELIX Food Switch 2.00mm nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Food Switch 3.00mm nozzle",
|
||||
"sub_path": "machine/FELIX Food Switch 3.00mm nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Food Switch 4.00mm nozzle",
|
||||
"sub_path": "machine/FELIX Food Switch 4.00mm nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Pro 3 0.25mm nozzle",
|
||||
"sub_path": "machine/FELIX Pro 3 0.25mm nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Pro 3 0.35mm nozzle",
|
||||
"sub_path": "machine/FELIX Pro 3 0.35mm nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Pro 3 0.50mm nozzle",
|
||||
"sub_path": "machine/FELIX Pro 3 0.50mm nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Pro 3 0.70mm nozzle",
|
||||
"sub_path": "machine/FELIX Pro 3 0.70mm nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Pro L 3.0 0.25mm nozzle",
|
||||
"sub_path": "machine/FELIX Pro L 3.0 0.25mm nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Pro L 3.0 0.35mm nozzle",
|
||||
"sub_path": "machine/FELIX Pro L 3.0 0.35mm nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Pro L 3.0 0.50mm nozzle",
|
||||
"sub_path": "machine/FELIX Pro L 3.0 0.50mm nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Pro L 3.0 0.70mm nozzle",
|
||||
"sub_path": "machine/FELIX Pro L 3.0 0.70mm nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Pro XL 3.0 0.25mm nozzle",
|
||||
"sub_path": "machine/FELIX Pro XL 3.0 0.25mm nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Pro XL 3.0 0.35mm nozzle",
|
||||
"sub_path": "machine/FELIX Pro XL 3.0 0.35mm nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Pro XL 3.0 0.50mm nozzle",
|
||||
"sub_path": "machine/FELIX Pro XL 3.0 0.50mm nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Pro XL 3.0 0.70mm nozzle",
|
||||
"sub_path": "machine/FELIX Pro XL 3.0 0.70mm nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Tec 4 0.25mm nozzle",
|
||||
"sub_path": "machine/FELIX Tec 4 0.25mm nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Tec 4 0.35mm nozzle",
|
||||
"sub_path": "machine/FELIX Tec 4 0.35mm nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Tec 4 0.50mm nozzle",
|
||||
"sub_path": "machine/FELIX Tec 4 0.50mm nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Tec 4 0.70mm nozzle",
|
||||
"sub_path": "machine/FELIX Tec 4 0.70mm nozzle.json"
|
||||
}
|
||||
],
|
||||
"process_list": [
|
||||
{
|
||||
"name": "fdm_process_common",
|
||||
"sub_path": "process/fdm_process_common.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_process_felix_food_common",
|
||||
"sub_path": "process/fdm_process_felix_food_common.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_process_felix_plastic_common",
|
||||
"sub_path": "process/fdm_process_felix_plastic_common.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Food Coarse @ 0.50mm",
|
||||
"sub_path": "process/FELIX Food Coarse @ 0.50mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Food Coarse @ 1.00mm",
|
||||
"sub_path": "process/FELIX Food Coarse @ 1.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Food Coarse @ 2.00mm",
|
||||
"sub_path": "process/FELIX Food Coarse @ 2.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Food Coarse @ 3.00mm",
|
||||
"sub_path": "process/FELIX Food Coarse @ 3.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Food Coarse @ 4.00mm",
|
||||
"sub_path": "process/FELIX Food Coarse @ 4.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Food Fine @ 0.50mm",
|
||||
"sub_path": "process/FELIX Food Fine @ 0.50mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Food Fine @ 1.00mm",
|
||||
"sub_path": "process/FELIX Food Fine @ 1.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Food Fine @ 2.00mm",
|
||||
"sub_path": "process/FELIX Food Fine @ 2.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Food Fine @ 3.00mm",
|
||||
"sub_path": "process/FELIX Food Fine @ 3.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Food Fine @ 4.00mm",
|
||||
"sub_path": "process/FELIX Food Fine @ 4.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Food Normal @ 0.50mm",
|
||||
"sub_path": "process/FELIX Food Normal @ 0.50mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Food Normal @ 1.00mm",
|
||||
"sub_path": "process/FELIX Food Normal @ 1.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Food Normal @ 2.00mm",
|
||||
"sub_path": "process/FELIX Food Normal @ 2.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Food Normal @ 3.00mm",
|
||||
"sub_path": "process/FELIX Food Normal @ 3.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Food Normal @ 4.00mm",
|
||||
"sub_path": "process/FELIX Food Normal @ 4.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Plastic Coarse @ 0.35mm",
|
||||
"sub_path": "process/FELIX Plastic Coarse @ 0.35mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Plastic Coarse @ 0.50mm",
|
||||
"sub_path": "process/FELIX Plastic Coarse @ 0.50mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Plastic Coarse @ 0.70mm",
|
||||
"sub_path": "process/FELIX Plastic Coarse @ 0.70mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Plastic Fine @ 0.25mm",
|
||||
"sub_path": "process/FELIX Plastic Fine @ 0.25mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Plastic Fine @ 0.35mm",
|
||||
"sub_path": "process/FELIX Plastic Fine @ 0.35mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Plastic Fine @ 0.50mm",
|
||||
"sub_path": "process/FELIX Plastic Fine @ 0.50mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Plastic Fine @ 0.70mm",
|
||||
"sub_path": "process/FELIX Plastic Fine @ 0.70mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Plastic Normal @ 0.25mm",
|
||||
"sub_path": "process/FELIX Plastic Normal @ 0.25mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Plastic Normal @ 0.35mm",
|
||||
"sub_path": "process/FELIX Plastic Normal @ 0.35mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Plastic Normal @ 0.50mm",
|
||||
"sub_path": "process/FELIX Plastic Normal @ 0.50mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Plastic Normal @ 0.70mm",
|
||||
"sub_path": "process/FELIX Plastic Normal @ 0.70mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Plastic Slightly Coarse @ 0.35mm",
|
||||
"sub_path": "process/FELIX Plastic Slightly Coarse @ 0.35mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Plastic Slightly Coarse @ 0.50mm",
|
||||
"sub_path": "process/FELIX Plastic Slightly Coarse @ 0.50mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Plastic Slightly Coarse @ 0.70mm",
|
||||
"sub_path": "process/FELIX Plastic Slightly Coarse @ 0.70mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Plastic Super Coarse @ 0.70mm",
|
||||
"sub_path": "process/FELIX Plastic Super Coarse @ 0.70mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Plastic Super Fine @ 0.25mm",
|
||||
"sub_path": "process/FELIX Plastic Super Fine @ 0.25mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Plastic Super Fine @ 0.35mm",
|
||||
"sub_path": "process/FELIX Plastic Super Fine @ 0.35mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Plastic Very Coarse @ 0.50mm",
|
||||
"sub_path": "process/FELIX Plastic Very Coarse @ 0.50mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Plastic Very Coarse @ 0.70mm",
|
||||
"sub_path": "process/FELIX Plastic Very Coarse @ 0.70mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Plastic Very Fine @ 0.25mm",
|
||||
"sub_path": "process/FELIX Plastic Very Fine @ 0.25mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Plastic Very Fine @ 0.35mm",
|
||||
"sub_path": "process/FELIX Plastic Very Fine @ 0.35mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Plastic Very Fine @ 0.50mm",
|
||||
"sub_path": "process/FELIX Plastic Very Fine @ 0.50mm.json"
|
||||
}
|
||||
],
|
||||
"filament_list": [
|
||||
{
|
||||
"name": "fdm_filament_common",
|
||||
"sub_path": "filament/fdm_filament_common.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_filament_food",
|
||||
"sub_path": "filament/fdm_filament_food.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_filament_abs",
|
||||
"sub_path": "filament/fdm_filament_abs.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_filament_asa",
|
||||
"sub_path": "filament/fdm_filament_asa.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_filament_flex",
|
||||
"sub_path": "filament/fdm_filament_flex.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_filament_pa",
|
||||
"sub_path": "filament/fdm_filament_pa.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_filament_pa11cf",
|
||||
"sub_path": "filament/fdm_filament_pa11cf.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_filament_pc",
|
||||
"sub_path": "filament/fdm_filament_pc.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_filament_pccf",
|
||||
"sub_path": "filament/fdm_filament_pccf.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_filament_pet",
|
||||
"sub_path": "filament/fdm_filament_pet.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_filament_pla",
|
||||
"sub_path": "filament/fdm_filament_pla.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_filament_pva",
|
||||
"sub_path": "filament/fdm_filament_pva.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_filament_pvb",
|
||||
"sub_path": "filament/fdm_filament_pvb.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_filament_tpu",
|
||||
"sub_path": "filament/fdm_filament_tpu.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Medium Plastic Syringe @0.50mm",
|
||||
"sub_path": "filament/FELIXFood/Food Medium Plastic Syringe @0.50mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Medium Plastic Syringe @1.00mm",
|
||||
"sub_path": "filament/FELIXFood/Food Medium Plastic Syringe @1.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Medium Plastic Syringe @2.00mm",
|
||||
"sub_path": "filament/FELIXFood/Food Medium Plastic Syringe @2.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Medium Plastic Syringe @3.00mm",
|
||||
"sub_path": "filament/FELIXFood/Food Medium Plastic Syringe @3.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Medium Plastic Syringe @4.00mm",
|
||||
"sub_path": "filament/FELIXFood/Food Medium Plastic Syringe @4.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Medium Stainless Steel Syringe @0.50mm",
|
||||
"sub_path": "filament/FELIXFood/Food Medium Stainless Steel Syringe @0.50mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Medium Stainless Steel Syringe @1.00mm",
|
||||
"sub_path": "filament/FELIXFood/Food Medium Stainless Steel Syringe @1.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Medium Stainless Steel Syringe @2.00mm",
|
||||
"sub_path": "filament/FELIXFood/Food Medium Stainless Steel Syringe @2.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Medium Stainless Steel Syringe @3.00mm",
|
||||
"sub_path": "filament/FELIXFood/Food Medium Stainless Steel Syringe @3.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Medium Stainless Steel Syringe @4.00mm",
|
||||
"sub_path": "filament/FELIXFood/Food Medium Stainless Steel Syringe @4.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Thick Stainless Steel Syringe @0.50mm",
|
||||
"sub_path": "filament/FELIXFood/Food Thick Stainless Steel Syringe @0.50mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Thick Stainless Steel Syringe @1.00mm",
|
||||
"sub_path": "filament/FELIXFood/Food Thick Stainless Steel Syringe @1.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Thick Stainless Steel Syringe @2.00mm",
|
||||
"sub_path": "filament/FELIXFood/Food Thick Stainless Steel Syringe @2.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Thick Stainless Steel Syringe @3.00mm",
|
||||
"sub_path": "filament/FELIXFood/Food Thick Stainless Steel Syringe @3.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Thick Stainless Steel Syringe @4.00mm",
|
||||
"sub_path": "filament/FELIXFood/Food Thick Stainless Steel Syringe @4.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Thin Plastic Syringe @0.50mm",
|
||||
"sub_path": "filament/FELIXFood/Food Thin Plastic Syringe @0.50mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Thin Plastic Syringe @1.00mm",
|
||||
"sub_path": "filament/FELIXFood/Food Thin Plastic Syringe @1.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Thin Plastic Syringe @2.00mm",
|
||||
"sub_path": "filament/FELIXFood/Food Thin Plastic Syringe @2.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Thin Plastic Syringe @3.00mm",
|
||||
"sub_path": "filament/FELIXFood/Food Thin Plastic Syringe @3.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Thin Plastic Syringe @4.00mm",
|
||||
"sub_path": "filament/FELIXFood/Food Thin Plastic Syringe @4.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Thin Stainless Steel Syringe @0.50mm",
|
||||
"sub_path": "filament/FELIXFood/Food Thin Stainless Steel Syringe @0.50mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Thin Stainless Steel Syringe @1.00mm",
|
||||
"sub_path": "filament/FELIXFood/Food Thin Stainless Steel Syringe @1.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Thin Stainless Steel Syringe @2.00mm",
|
||||
"sub_path": "filament/FELIXFood/Food Thin Stainless Steel Syringe @2.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Thin Stainless Steel Syringe @3.00mm",
|
||||
"sub_path": "filament/FELIXFood/Food Thin Stainless Steel Syringe @3.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Thin Stainless Steel Syringe @4.00mm",
|
||||
"sub_path": "filament/FELIXFood/Food Thin Stainless Steel Syringe @4.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Very Thick Stainless Steel Syringe @1.00mm",
|
||||
"sub_path": "filament/FELIXFood/Food Very Thick Stainless Steel Syringe @1.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Very Thick Stainless Steel Syringe @2.00mm",
|
||||
"sub_path": "filament/FELIXFood/Food Very Thick Stainless Steel Syringe @2.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Very Thick Stainless Steel Syringe @3.00mm",
|
||||
"sub_path": "filament/FELIXFood/Food Very Thick Stainless Steel Syringe @3.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Very Thick Stainless Steel Syringe @4.00mm",
|
||||
"sub_path": "filament/FELIXFood/Food Very Thick Stainless Steel Syringe @4.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Very Thin Plastic Syringe @0.50mm",
|
||||
"sub_path": "filament/FELIXFood/Food Very Thin Plastic Syringe @0.50mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Very Thin Plastic Syringe @1.00mm",
|
||||
"sub_path": "filament/FELIXFood/Food Very Thin Plastic Syringe @1.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Very Thin Plastic Syringe @2.00mm",
|
||||
"sub_path": "filament/FELIXFood/Food Very Thin Plastic Syringe @2.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Very Thin Plastic Syringe @3.00mm",
|
||||
"sub_path": "filament/FELIXFood/Food Very Thin Plastic Syringe @3.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Very Thin Plastic Syringe @4.00mm",
|
||||
"sub_path": "filament/FELIXFood/Food Very Thin Plastic Syringe @4.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Very Thin Stainless Steel Syringe @1.00mm",
|
||||
"sub_path": "filament/FELIXFood/Food Very Thin Stainless Steel Syringe @1.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Very Thin Stainless Steel Syringe @2.00mm",
|
||||
"sub_path": "filament/FELIXFood/Food Very Thin Stainless Steel Syringe @2.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Very Thin Stainless Steel Syringe @3.00mm",
|
||||
"sub_path": "filament/FELIXFood/Food Very Thin Stainless Steel Syringe @3.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Very Thin Stainless Steel Syringe @4.00mm",
|
||||
"sub_path": "filament/FELIXFood/Food Very Thin Stainless Steel Syringe @4.00mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Food Very Thin Stainless Steel Syringe @0.50mm",
|
||||
"sub_path": "filament/FELIXFood/Food Very Thin Stainless Steel Syringe @0.50mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FORMFUTURA TitanX ABS Brass @ 0.35mm",
|
||||
"sub_path": "filament/FELIXPlastic/FORMFUTURA TitanX ABS Brass @ 0.35mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FORMFUTURA TitanX ABS Brass @ 0.50mm",
|
||||
"sub_path": "filament/FELIXPlastic/FORMFUTURA TitanX ABS Brass @ 0.50mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FORMFUTURA TitanX ABS Hardened Steel @ 0.25mm",
|
||||
"sub_path": "filament/FELIXPlastic/FORMFUTURA TitanX ABS Hardened Steel @ 0.25mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FORMFUTURA TitanX ABS Hardened Steel @ 0.35mm",
|
||||
"sub_path": "filament/FELIXPlastic/FORMFUTURA TitanX ABS Hardened Steel @ 0.35mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FORMFUTURA TitanX ABS Hardened Steel @ 0.50mm",
|
||||
"sub_path": "filament/FELIXPlastic/FORMFUTURA TitanX ABS Hardened Steel @ 0.50mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FORMFUTURA TitanX ABS Hardened Steel @ 0.70mm",
|
||||
"sub_path": "filament/FELIXPlastic/FORMFUTURA TitanX ABS Hardened Steel @ 0.70mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Ultrafuse ABS Fusion+ Brass @ 0.35mm",
|
||||
"sub_path": "filament/FELIXPlastic/Ultrafuse ABS Fusion+ Brass @ 0.35mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Ultrafuse ABS Fusion+ Brass @ 0.50mm",
|
||||
"sub_path": "filament/FELIXPlastic/Ultrafuse ABS Fusion+ Brass @ 0.50mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Ultrafuse ABS Fusion+ Hardened Steel @ 0.25mm",
|
||||
"sub_path": "filament/FELIXPlastic/Ultrafuse ABS Fusion+ Hardened Steel @ 0.25mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Ultrafuse ABS Fusion+ Hardened Steel @ 0.35mm",
|
||||
"sub_path": "filament/FELIXPlastic/Ultrafuse ABS Fusion+ Hardened Steel @ 0.35mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Ultrafuse ABS Fusion+ Hardened Steel @ 0.50mm",
|
||||
"sub_path": "filament/FELIXPlastic/Ultrafuse ABS Fusion+ Hardened Steel @ 0.50mm.json"
|
||||
},
|
||||
{
|
||||
"name": "Ultrafuse ABS Fusion+ Hardened Steel @ 0.70mm",
|
||||
"sub_path": "filament/FELIXPlastic/Ultrafuse ABS Fusion+ Hardened Steel @ 0.70mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FORMFUTURA AppoloX ASA Brass @ 0.35mm",
|
||||
"sub_path": "filament/FELIXPlastic/FORMFUTURA AppoloX ASA Brass @ 0.35mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FORMFUTURA AppoloX ASA Brass @ 0.50mm",
|
||||
"sub_path": "filament/FELIXPlastic/FORMFUTURA AppoloX ASA Brass @ 0.50mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FORMFUTURA AppoloX ASA Hardened Steel @ 0.25mm",
|
||||
"sub_path": "filament/FELIXPlastic/FORMFUTURA AppoloX ASA Hardened Steel @ 0.25mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FORMFUTURA AppoloX ASA Hardened Steel @ 0.35mm",
|
||||
"sub_path": "filament/FELIXPlastic/FORMFUTURA AppoloX ASA Hardened Steel @ 0.35mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FORMFUTURA AppoloX ASA Hardened Steel @ 0.50mm",
|
||||
"sub_path": "filament/FELIXPlastic/FORMFUTURA AppoloX ASA Hardened Steel @ 0.50mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FORMFUTURA AppoloX ASA Hardened Steel @ 0.70mm",
|
||||
"sub_path": "filament/FELIXPlastic/FORMFUTURA AppoloX ASA Hardened Steel @ 0.70mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX FLEX Brass @ 0.35mm",
|
||||
"sub_path": "filament/FELIXPlastic/FELIX FLEX Brass @ 0.35mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX FLEX Brass @ 0.50mm",
|
||||
"sub_path": "filament/FELIXPlastic/FELIX FLEX Brass @ 0.50mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX FLEX Hardened Steel @ 0.25mm",
|
||||
"sub_path": "filament/FELIXPlastic/FELIX FLEX Hardened Steel @ 0.25mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX FLEX Hardened Steel @ 0.35mm",
|
||||
"sub_path": "filament/FELIXPlastic/FELIX FLEX Hardened Steel @ 0.35mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX FLEX Hardened Steel @ 0.50mm",
|
||||
"sub_path": "filament/FELIXPlastic/FELIX FLEX Hardened Steel @ 0.50mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX FLEX Hardened Steel @ 0.70mm",
|
||||
"sub_path": "filament/FELIXPlastic/FELIX FLEX Hardened Steel @ 0.70mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX PETG Brass @ 0.35mm",
|
||||
"sub_path": "filament/FELIXPlastic/FELIX PETG Brass @ 0.35mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX PETG Brass @ 0.50mm",
|
||||
"sub_path": "filament/FELIXPlastic/FELIX PETG Brass @ 0.50mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX PETG Hardened Steel @ 0.25mm",
|
||||
"sub_path": "filament/FELIXPlastic/FELIX PETG Hardened Steel @ 0.25mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX PETG Hardened Steel @ 0.35mm",
|
||||
"sub_path": "filament/FELIXPlastic/FELIX PETG Hardened Steel @ 0.35mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX PETG Hardened Steel @ 0.50mm",
|
||||
"sub_path": "filament/FELIXPlastic/FELIX PETG Hardened Steel @ 0.50mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX PETG Hardened Steel @ 0.70mm",
|
||||
"sub_path": "filament/FELIXPlastic/FELIX PETG Hardened Steel @ 0.70mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Premium PLA Brass @ 0.35mm",
|
||||
"sub_path": "filament/FELIXPlastic/FELIX Premium PLA Brass @ 0.35mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Premium PLA Brass @ 0.50mm",
|
||||
"sub_path": "filament/FELIXPlastic/FELIX Premium PLA Brass @ 0.50mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Premium PLA Hardened Steel @ 0.25mm",
|
||||
"sub_path": "filament/FELIXPlastic/FELIX Premium PLA Hardened Steel @ 0.25mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Premium PLA Hardened Steel @ 0.35mm",
|
||||
"sub_path": "filament/FELIXPlastic/FELIX Premium PLA Hardened Steel @ 0.35mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Premium PLA Hardened Steel @ 0.50mm",
|
||||
"sub_path": "filament/FELIXPlastic/FELIX Premium PLA Hardened Steel @ 0.50mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Premium PLA Hardened Steel @ 0.70mm",
|
||||
"sub_path": "filament/FELIXPlastic/FELIX Premium PLA Hardened Steel @ 0.70mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Wood Brass @ 0.35mm",
|
||||
"sub_path": "filament/FELIXPlastic/FELIX Wood Brass @ 0.35mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Wood Brass @ 0.50mm",
|
||||
"sub_path": "filament/FELIXPlastic/FELIX Wood Brass @ 0.50mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Wood Hardened Steel @ 0.25mm",
|
||||
"sub_path": "filament/FELIXPlastic/FELIX Wood Hardened Steel @ 0.25mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Wood Hardened Steel @ 0.35mm",
|
||||
"sub_path": "filament/FELIXPlastic/FELIX Wood Hardened Steel @ 0.35mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Wood Hardened Steel @ 0.50mm",
|
||||
"sub_path": "filament/FELIXPlastic/FELIX Wood Hardened Steel @ 0.50mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FELIX Wood Hardened Steel @ 0.70mm",
|
||||
"sub_path": "filament/FELIXPlastic/FELIX Wood Hardened Steel @ 0.70mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FORMFUTURA ePLA Brass @ 0.35mm",
|
||||
"sub_path": "filament/FELIXPlastic/FORMFUTURA ePLA Brass @ 0.35mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FORMFUTURA ePLA Brass @ 0.50mm",
|
||||
"sub_path": "filament/FELIXPlastic/FORMFUTURA ePLA Brass @ 0.50mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FORMFUTURA ePLA Hardened Steel @ 0.25mm",
|
||||
"sub_path": "filament/FELIXPlastic/FORMFUTURA ePLA Hardened Steel @ 0.25mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FORMFUTURA ePLA Hardened Steel @ 0.35mm",
|
||||
"sub_path": "filament/FELIXPlastic/FORMFUTURA ePLA Hardened Steel @ 0.35mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FORMFUTURA ePLA Hardened Steel @ 0.50mm",
|
||||
"sub_path": "filament/FELIXPlastic/FORMFUTURA ePLA Hardened Steel @ 0.50mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FORMFUTURA ePLA Hardened Steel @ 0.70mm",
|
||||
"sub_path": "filament/FELIXPlastic/FORMFUTURA ePLA Hardened Steel @ 0.70mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FORMFUTURA Aquasolve PVA Brass @ 0.35mm",
|
||||
"sub_path": "filament/FELIXPlastic/FORMFUTURA Aquasolve PVA Brass @ 0.35mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FORMFUTURA Aquasolve PVA Brass @ 0.50mm",
|
||||
"sub_path": "filament/FELIXPlastic/FORMFUTURA Aquasolve PVA Brass @ 0.50mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FORMFUTURA Aquasolve PVA Hardened Steel @ 0.25mm",
|
||||
"sub_path": "filament/FELIXPlastic/FORMFUTURA Aquasolve PVA Hardened Steel @ 0.25mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FORMFUTURA Aquasolve PVA Hardened Steel @ 0.35mm",
|
||||
"sub_path": "filament/FELIXPlastic/FORMFUTURA Aquasolve PVA Hardened Steel @ 0.35mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FORMFUTURA Aquasolve PVA Hardened Steel @ 0.50mm",
|
||||
"sub_path": "filament/FELIXPlastic/FORMFUTURA Aquasolve PVA Hardened Steel @ 0.50mm.json"
|
||||
},
|
||||
{
|
||||
"name": "FORMFUTURA Aquasolve PVA Hardened Steel @ 0.70mm",
|
||||
"sub_path": "filament/FELIXPlastic/FORMFUTURA Aquasolve PVA Hardened Steel @ 0.70mm.json"
|
||||
}
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,28 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<svg id="a" xmlns="http://www.w3.org/2000/svg" width="180.62mm" height="180.62mm" viewBox="0 0 512 512" xmlns:c2pa="http://c2pa.org/manifest">
|
||||
<rect x="0" y="0" width="512" height="512" fill="none"/>
|
||||
<g fill="#ffffff" transform="translate(5,460) scale(0.2)">
|
||||
<g>
|
||||
<path d="M139.4.8l-.2,62c-34.3,0-63.4,21.8-73.2,51.9C26.4,141,.2,187.8.2,241.3H0l.2-101.3C.2,63.1,62.4.8,139.4.8Z"/>
|
||||
<path d="M139.1,92.5l-.8,62.5c-42.6,0-77.1,38.6-77.1,86.3l1-103.9c0-7.9,1.3-15.5,3.6-22.7,21.2-14.1,46.3-22.3,73.2-22.3Z"/>
|
||||
<path d="M65.9,114.7c-2.3,7.2-3.6,14.8-3.6,22.7l-1,103.9H.2c0-53.5,26.3-100.3,65.7-126.6Z"/>
|
||||
</g>
|
||||
<polygon points="202.8 .4 202.8 92.9 226.2 92.9 226.2 56 259.8 56 259.8 36.1 226.2 36.1 226.2 19.4 265.7 19.4 265.7 0 202.8 .4"/>
|
||||
<polygon points="282.3 -.3 282.3 93 346.1 93 346.1 72.4 306.8 72.4 306.8 55.6 341.7 55.6 341.7 36.4 306.5 36.4 306.5 19.6 346.2 19.6 346.2 -.3 282.3 -.3"/>
|
||||
<polygon points="365.9 92.8 429.5 92.8 429.5 70.9 389.6 70.9 389.6 .2 365 .2 365.9 92.8"/>
|
||||
<polygon points="448 0 471.9 0 471.9 92.5 447.5 92.5 448 0"/>
|
||||
<path d="M485.1,92.5s34.7-44.3,33.4-46.5S485.7,0,485.7,0h29l18.4,24.8L550.1,0h26.6l-29.9,45.4,33.1,46.8h-28.8l-19.3-27.4-18.9,28.1-27.9-.4Z"/>
|
||||
<g>
|
||||
<path d="M210.9,154.1c-1.9,0-3.7-.2-5.3-.7-1.6-.4-3-1-4.2-1.6v-3.9c1.1.6,2.4,1.1,3.9,1.6,1.5.5,3.2.7,5.1.7,3.1,0,5.5-.6,7.2-1.7,1.7-1.2,2.5-2.8,2.5-5s-.8-3.9-2.5-5c-1.7-1.2-4.2-1.7-7.4-1.7h-3.9v-3.7h4c2.6,0,4.5-.5,5.9-1.5,1.4-1,2-2.4,2-4.2s-.3-2.3-1-3.1c-.6-.8-1.6-1.5-2.8-1.9-1.3-.4-2.8-.7-4.6-.7s-3,.2-4.3.6c-1.3.4-2.4.8-3.3,1.3v-3.9c1.1-.5,2.3-.9,3.6-1.3,1.3-.4,2.8-.5,4.5-.5s4,.3,5.5.8c1.5.5,2.7,1.3,3.6,2.2.9.9,1.6,1.9,2,3.1.4,1.1.6,2.3.6,3.4s-.2,2.4-.7,3.3c-.5.9-1,1.7-1.6,2.2-.6.6-1.4,1.1-2.3,1.6,1.3.7,2.3,1.4,3.2,2.1s1.6,1.7,2.2,2.8c.6,1.1,1,2.5,1,4.2s-.2,2.5-.7,3.8c-.5,1.2-1.2,2.4-2.2,3.4s-2.4,1.8-4,2.4c-1.7.6-3.7.9-6.1.9Z"/>
|
||||
<path d="M232.1,153.7v-35.4h11.1c5.5,0,9.7,1.5,12.4,4.4,2.8,3,4.2,7.4,4.2,13.2s-1.4,10.3-4.2,13.2c-2.8,3-6.9,4.5-12.4,4.5h-11.1ZM235.9,150h7c4.5,0,7.8-1.1,9.9-3.4,2-2.3,3.1-5.8,3.1-10.7s-1-8.4-3.1-10.7c-2-2.3-5.3-3.4-9.9-3.4h-7v28.2Z"/>
|
||||
<path d="M291.9,154.4c-.8,0-1.7-.1-2.6-.3-1-.2-1.9-.5-2.8-.8-.9-.3-1.7-.7-2.4-1l1.3-1.3v14.2h-3.8v-33.2c0-1.1.3-2,1-2.7.7-.7,1.6-1.2,2.7-1.6,1.1-.4,2.3-.6,3.5-.8,1.2-.2,2.4-.2,3.5-.2,2.1,0,4.1.4,6,1.3,1.9.9,3.4,2.4,4.6,4.5s1.7,5,1.7,8.6-.5,5.1-1.5,7.1c-1,2-2.4,3.5-4.3,4.6-1.9,1.1-4.2,1.6-6.9,1.6ZM291.9,150.9c1.9,0,3.5-.4,4.8-1.2,1.3-.8,2.2-2,2.8-3.5.6-1.5,1-3.2,1-5.1s-.2-3.7-.6-5.4c-.4-1.7-1.2-3-2.4-4-1.2-1-3-1.5-5.2-1.5s-3.4.2-4.8.6c-1.4.4-2,1-2,1.8v16.4c1.1.6,2.2,1.1,3.3,1.4s2.2.5,3.3.5Z"/>
|
||||
<path d="M311.1,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1c-.8,0-1.6.2-2.4.3-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
|
||||
<path d="M330.5,122.5v-4.2h4.2v4.2h-4.2ZM330.8,153.7v-26.4h3.8v26.4h-3.8Z"/>
|
||||
<path d="M342.7,129.3c.8-.4,1.7-.8,2.6-1.1.9-.3,1.8-.6,2.8-.8.9-.2,1.9-.4,2.9-.5,1-.1,2-.2,2.9-.2,2.6,0,4.6.4,6.1,1.1,1.5.8,2.6,1.9,3.3,3.3.7,1.4,1,3.2,1,5.2v17.2h-3.8v-17.2c0-.6,0-1.3-.2-2-.2-.7-.5-1.4-.9-2-.5-.7-1.2-1.2-2.1-1.6s-2.2-.6-3.8-.6-2.2,0-3.4.3-2.4.4-3.6.8v22.4h-3.8v-24.3Z"/>
|
||||
<path d="M380.7,154.1c-1.9,0-3.4-.6-4.7-1.7-1.3-1.1-1.9-2.9-1.9-5.1v-16.5h-4.6v-3.5h4.6v-7.5h3.8v7.5h6.8v3.5h-6.8v15.3c0,1.5.2,2.6.7,3.3s1.4,1.1,2.8,1.1,1.3,0,1.9-.2,1.1-.3,1.5-.5v3.6c-.5.2-1.1.3-1.9.5s-1.5.2-2.1.2Z"/>
|
||||
<path d="M402,154.4c-2.5,0-4.7-.5-6.5-1.6-1.8-1-3.3-2.6-4.2-4.7-1-2.1-1.5-4.7-1.5-7.8,0-4.6,1-8,3.1-10.3,2.1-2.3,4.9-3.4,8.5-3.4s5.1.6,6.8,1.9c1.7,1.3,2.9,3,3.7,5.1.7,2.2,1.1,4.6,1.1,7.3h-21.3l.3-3.5h18.5l-1.5.5c-.1-2.6-.8-4.6-2-5.9-1.2-1.3-3.1-2-5.6-2s-3.2.3-4.3,1c-1.1.6-2,1.7-2.6,3.3s-.8,3.8-.8,6.6.8,5.7,2.3,7.3c1.5,1.7,3.6,2.5,6.3,2.5s2.5,0,3.6-.3,2.1-.5,3-.8c.9-.4,1.7-.7,2.4-1.2v3.9c-1.3.6-2.7,1.1-4.2,1.4-1.5.3-3.2.5-5.1.5Z"/>
|
||||
<path d="M419.5,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1-1.6.2-2.4.3c-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
|
||||
<path d="M446.4,154.4c-1.9,0-3.5-.2-4.8-.6s-2.6-.9-4-1.6v-4c1.1.6,2.1,1.1,2.9,1.5s1.7.7,2.6.9c.9.2,1.9.3,3,.3,1.8,0,3.2-.4,4.3-1.2,1.1-.8,1.7-1.8,1.7-3s-.3-1.7-.8-2.3-1.2-1-2.1-1.3c-.8-.4-1.7-.7-2.7-1.1-1-.3-2.1-.6-3.1-.9-1-.3-2-.8-2.9-1.3-.9-.5-1.6-1.3-2.1-2.1-.5-.9-.8-2-.8-3.4s.3-2.5.8-3.4c.5-1,1.3-1.7,2.1-2.4.9-.6,1.9-1.1,3-1.4,1.1-.3,2.2-.4,3.3-.4,1.6,0,2.9.2,4.1.6,1.1.4,2.3.9,3.5,1.4v3.8c-1.3-.7-2.5-1.3-3.6-1.7-1.1-.4-2.3-.7-3.8-.7s-2.7.3-3.9.9c-1.1.6-1.7,1.5-1.7,2.7s.3,1.8.9,2.4,1.4,1,2.3,1.4c1,.3,2,.7,3.1,1,.9.3,1.8.6,2.8.9,1,.3,1.8.8,2.7,1.3.8.5,1.5,1.3,2,2.1.5.9.8,2,.8,3.4s-.5,3.4-1.4,4.6-2.2,2.1-3.6,2.7c-1.5.6-3,.8-4.5.8Z"/>
|
||||
</g>
|
||||
</g>
|
||||
</svg>
|
||||
|
After Width: | Height: | Size: 4.7 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 808 KiB |
Binary file not shown.
@@ -0,0 +1,28 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<svg id="a" xmlns="http://www.w3.org/2000/svg" width="180.62mm" height="180.62mm" viewBox="0 0 250 195" xmlns:c2pa="http://c2pa.org/manifest">
|
||||
<rect x="0" y="0" width="250" height="195" fill="none"/>
|
||||
<g fill="#ffffff" transform="translate(2,169) scale(0.1)">
|
||||
<g>
|
||||
<path d="M139.4.8l-.2,62c-34.3,0-63.4,21.8-73.2,51.9C26.4,141,.2,187.8.2,241.3H0l.2-101.3C.2,63.1,62.4.8,139.4.8Z"/>
|
||||
<path d="M139.1,92.5l-.8,62.5c-42.6,0-77.1,38.6-77.1,86.3l1-103.9c0-7.9,1.3-15.5,3.6-22.7,21.2-14.1,46.3-22.3,73.2-22.3Z"/>
|
||||
<path d="M65.9,114.7c-2.3,7.2-3.6,14.8-3.6,22.7l-1,103.9H.2c0-53.5,26.3-100.3,65.7-126.6Z"/>
|
||||
</g>
|
||||
<polygon points="202.8 .4 202.8 92.9 226.2 92.9 226.2 56 259.8 56 259.8 36.1 226.2 36.1 226.2 19.4 265.7 19.4 265.7 0 202.8 .4"/>
|
||||
<polygon points="282.3 -.3 282.3 93 346.1 93 346.1 72.4 306.8 72.4 306.8 55.6 341.7 55.6 341.7 36.4 306.5 36.4 306.5 19.6 346.2 19.6 346.2 -.3 282.3 -.3"/>
|
||||
<polygon points="365.9 92.8 429.5 92.8 429.5 70.9 389.6 70.9 389.6 .2 365 .2 365.9 92.8"/>
|
||||
<polygon points="448 0 471.9 0 471.9 92.5 447.5 92.5 448 0"/>
|
||||
<path d="M485.1,92.5s34.7-44.3,33.4-46.5S485.7,0,485.7,0h29l18.4,24.8L550.1,0h26.6l-29.9,45.4,33.1,46.8h-28.8l-19.3-27.4-18.9,28.1-27.9-.4Z"/>
|
||||
<g>
|
||||
<path d="M210.9,154.1c-1.9,0-3.7-.2-5.3-.7-1.6-.4-3-1-4.2-1.6v-3.9c1.1.6,2.4,1.1,3.9,1.6,1.5.5,3.2.7,5.1.7,3.1,0,5.5-.6,7.2-1.7,1.7-1.2,2.5-2.8,2.5-5s-.8-3.9-2.5-5c-1.7-1.2-4.2-1.7-7.4-1.7h-3.9v-3.7h4c2.6,0,4.5-.5,5.9-1.5,1.4-1,2-2.4,2-4.2s-.3-2.3-1-3.1c-.6-.8-1.6-1.5-2.8-1.9-1.3-.4-2.8-.7-4.6-.7s-3,.2-4.3.6c-1.3.4-2.4.8-3.3,1.3v-3.9c1.1-.5,2.3-.9,3.6-1.3,1.3-.4,2.8-.5,4.5-.5s4,.3,5.5.8c1.5.5,2.7,1.3,3.6,2.2.9.9,1.6,1.9,2,3.1.4,1.1.6,2.3.6,3.4s-.2,2.4-.7,3.3c-.5.9-1,1.7-1.6,2.2-.6.6-1.4,1.1-2.3,1.6,1.3.7,2.3,1.4,3.2,2.1s1.6,1.7,2.2,2.8c.6,1.1,1,2.5,1,4.2s-.2,2.5-.7,3.8c-.5,1.2-1.2,2.4-2.2,3.4s-2.4,1.8-4,2.4c-1.7.6-3.7.9-6.1.9Z"/>
|
||||
<path d="M232.1,153.7v-35.4h11.1c5.5,0,9.7,1.5,12.4,4.4,2.8,3,4.2,7.4,4.2,13.2s-1.4,10.3-4.2,13.2c-2.8,3-6.9,4.5-12.4,4.5h-11.1ZM235.9,150h7c4.5,0,7.8-1.1,9.9-3.4,2-2.3,3.1-5.8,3.1-10.7s-1-8.4-3.1-10.7c-2-2.3-5.3-3.4-9.9-3.4h-7v28.2Z"/>
|
||||
<path d="M291.9,154.4c-.8,0-1.7-.1-2.6-.3-1-.2-1.9-.5-2.8-.8-.9-.3-1.7-.7-2.4-1l1.3-1.3v14.2h-3.8v-33.2c0-1.1.3-2,1-2.7.7-.7,1.6-1.2,2.7-1.6,1.1-.4,2.3-.6,3.5-.8,1.2-.2,2.4-.2,3.5-.2,2.1,0,4.1.4,6,1.3,1.9.9,3.4,2.4,4.6,4.5s1.7,5,1.7,8.6-.5,5.1-1.5,7.1c-1,2-2.4,3.5-4.3,4.6-1.9,1.1-4.2,1.6-6.9,1.6ZM291.9,150.9c1.9,0,3.5-.4,4.8-1.2,1.3-.8,2.2-2,2.8-3.5.6-1.5,1-3.2,1-5.1s-.2-3.7-.6-5.4c-.4-1.7-1.2-3-2.4-4-1.2-1-3-1.5-5.2-1.5s-3.4.2-4.8.6c-1.4.4-2,1-2,1.8v16.4c1.1.6,2.2,1.1,3.3,1.4s2.2.5,3.3.5Z"/>
|
||||
<path d="M311.1,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1c-.8,0-1.6.2-2.4.3-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
|
||||
<path d="M330.5,122.5v-4.2h4.2v4.2h-4.2ZM330.8,153.7v-26.4h3.8v26.4h-3.8Z"/>
|
||||
<path d="M342.7,129.3c.8-.4,1.7-.8,2.6-1.1.9-.3,1.8-.6,2.8-.8.9-.2,1.9-.4,2.9-.5,1-.1,2-.2,2.9-.2,2.6,0,4.6.4,6.1,1.1,1.5.8,2.6,1.9,3.3,3.3.7,1.4,1,3.2,1,5.2v17.2h-3.8v-17.2c0-.6,0-1.3-.2-2-.2-.7-.5-1.4-.9-2-.5-.7-1.2-1.2-2.1-1.6s-2.2-.6-3.8-.6-2.2,0-3.4.3-2.4.4-3.6.8v22.4h-3.8v-24.3Z"/>
|
||||
<path d="M380.7,154.1c-1.9,0-3.4-.6-4.7-1.7-1.3-1.1-1.9-2.9-1.9-5.1v-16.5h-4.6v-3.5h4.6v-7.5h3.8v7.5h6.8v3.5h-6.8v15.3c0,1.5.2,2.6.7,3.3s1.4,1.1,2.8,1.1,1.3,0,1.9-.2,1.1-.3,1.5-.5v3.6c-.5.2-1.1.3-1.9.5s-1.5.2-2.1.2Z"/>
|
||||
<path d="M402,154.4c-2.5,0-4.7-.5-6.5-1.6-1.8-1-3.3-2.6-4.2-4.7-1-2.1-1.5-4.7-1.5-7.8,0-4.6,1-8,3.1-10.3,2.1-2.3,4.9-3.4,8.5-3.4s5.1.6,6.8,1.9c1.7,1.3,2.9,3,3.7,5.1.7,2.2,1.1,4.6,1.1,7.3h-21.3l.3-3.5h18.5l-1.5.5c-.1-2.6-.8-4.6-2-5.9-1.2-1.3-3.1-2-5.6-2s-3.2.3-4.3,1c-1.1.6-2,1.7-2.6,3.3s-.8,3.8-.8,6.6.8,5.7,2.3,7.3c1.5,1.7,3.6,2.5,6.3,2.5s2.5,0,3.6-.3,2.1-.5,3-.8c.9-.4,1.7-.7,2.4-1.2v3.9c-1.3.6-2.7,1.1-4.2,1.4-1.5.3-3.2.5-5.1.5Z"/>
|
||||
<path d="M419.5,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1-1.6.2-2.4.3c-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
|
||||
<path d="M446.4,154.4c-1.9,0-3.5-.2-4.8-.6s-2.6-.9-4-1.6v-4c1.1.6,2.1,1.1,2.9,1.5s1.7.7,2.6.9c.9.2,1.9.3,3,.3,1.8,0,3.2-.4,4.3-1.2,1.1-.8,1.7-1.8,1.7-3s-.3-1.7-.8-2.3-1.2-1-2.1-1.3c-.8-.4-1.7-.7-2.7-1.1-1-.3-2.1-.6-3.1-.9-1-.3-2-.8-2.9-1.3-.9-.5-1.6-1.3-2.1-2.1-.5-.9-.8-2-.8-3.4s.3-2.5.8-3.4c.5-1,1.3-1.7,2.1-2.4.9-.6,1.9-1.1,3-1.4,1.1-.3,2.2-.4,3.3-.4,1.6,0,2.9.2,4.1.6,1.1.4,2.3.9,3.5,1.4v3.8c-1.3-.7-2.5-1.3-3.6-1.7-1.1-.4-2.3-.7-3.8-.7s-2.7.3-3.9.9c-1.1.6-1.7,1.5-1.7,2.7s.3,1.8.9,2.4,1.4,1,2.3,1.4c1,.3,2,.7,3.1,1,.9.3,1.8.6,2.8.9,1,.3,1.8.8,2.7,1.3.8.5,1.5,1.3,2,2.1.5.9.8,2,.8,3.4s-.5,3.4-1.4,4.6-2.2,2.1-3.6,2.7c-1.5.6-3,.8-4.5.8Z"/>
|
||||
</g>
|
||||
</g>
|
||||
</svg>
|
||||
|
After Width: | Height: | Size: 4.7 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 716 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 793 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 183 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 69 KiB |
@@ -0,0 +1,28 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<svg id="a" xmlns="http://www.w3.org/2000/svg" width="180.62mm" height="180.62mm" viewBox="0 0 300 400" xmlns:c2pa="http://c2pa.org/manifest">
|
||||
<rect x="0" y="0" width="300" height="400" fill="none"/>
|
||||
<g fill="#ffffff" transform="translate(3,365) scale(0.13)">
|
||||
<g>
|
||||
<path d="M139.4.8l-.2,62c-34.3,0-63.4,21.8-73.2,51.9C26.4,141,.2,187.8.2,241.3H0l.2-101.3C.2,63.1,62.4.8,139.4.8Z"/>
|
||||
<path d="M139.1,92.5l-.8,62.5c-42.6,0-77.1,38.6-77.1,86.3l1-103.9c0-7.9,1.3-15.5,3.6-22.7,21.2-14.1,46.3-22.3,73.2-22.3Z"/>
|
||||
<path d="M65.9,114.7c-2.3,7.2-3.6,14.8-3.6,22.7l-1,103.9H.2c0-53.5,26.3-100.3,65.7-126.6Z"/>
|
||||
</g>
|
||||
<polygon points="202.8 .4 202.8 92.9 226.2 92.9 226.2 56 259.8 56 259.8 36.1 226.2 36.1 226.2 19.4 265.7 19.4 265.7 0 202.8 .4"/>
|
||||
<polygon points="282.3 -.3 282.3 93 346.1 93 346.1 72.4 306.8 72.4 306.8 55.6 341.7 55.6 341.7 36.4 306.5 36.4 306.5 19.6 346.2 19.6 346.2 -.3 282.3 -.3"/>
|
||||
<polygon points="365.9 92.8 429.5 92.8 429.5 70.9 389.6 70.9 389.6 .2 365 .2 365.9 92.8"/>
|
||||
<polygon points="448 0 471.9 0 471.9 92.5 447.5 92.5 448 0"/>
|
||||
<path d="M485.1,92.5s34.7-44.3,33.4-46.5S485.7,0,485.7,0h29l18.4,24.8L550.1,0h26.6l-29.9,45.4,33.1,46.8h-28.8l-19.3-27.4-18.9,28.1-27.9-.4Z"/>
|
||||
<g>
|
||||
<path d="M210.9,154.1c-1.9,0-3.7-.2-5.3-.7-1.6-.4-3-1-4.2-1.6v-3.9c1.1.6,2.4,1.1,3.9,1.6,1.5.5,3.2.7,5.1.7,3.1,0,5.5-.6,7.2-1.7,1.7-1.2,2.5-2.8,2.5-5s-.8-3.9-2.5-5c-1.7-1.2-4.2-1.7-7.4-1.7h-3.9v-3.7h4c2.6,0,4.5-.5,5.9-1.5,1.4-1,2-2.4,2-4.2s-.3-2.3-1-3.1c-.6-.8-1.6-1.5-2.8-1.9-1.3-.4-2.8-.7-4.6-.7s-3,.2-4.3.6c-1.3.4-2.4.8-3.3,1.3v-3.9c1.1-.5,2.3-.9,3.6-1.3,1.3-.4,2.8-.5,4.5-.5s4,.3,5.5.8c1.5.5,2.7,1.3,3.6,2.2.9.9,1.6,1.9,2,3.1.4,1.1.6,2.3.6,3.4s-.2,2.4-.7,3.3c-.5.9-1,1.7-1.6,2.2-.6.6-1.4,1.1-2.3,1.6,1.3.7,2.3,1.4,3.2,2.1s1.6,1.7,2.2,2.8c.6,1.1,1,2.5,1,4.2s-.2,2.5-.7,3.8c-.5,1.2-1.2,2.4-2.2,3.4s-2.4,1.8-4,2.4c-1.7.6-3.7.9-6.1.9Z"/>
|
||||
<path d="M232.1,153.7v-35.4h11.1c5.5,0,9.7,1.5,12.4,4.4,2.8,3,4.2,7.4,4.2,13.2s-1.4,10.3-4.2,13.2c-2.8,3-6.9,4.5-12.4,4.5h-11.1ZM235.9,150h7c4.5,0,7.8-1.1,9.9-3.4,2-2.3,3.1-5.8,3.1-10.7s-1-8.4-3.1-10.7c-2-2.3-5.3-3.4-9.9-3.4h-7v28.2Z"/>
|
||||
<path d="M291.9,154.4c-.8,0-1.7-.1-2.6-.3-1-.2-1.9-.5-2.8-.8-.9-.3-1.7-.7-2.4-1l1.3-1.3v14.2h-3.8v-33.2c0-1.1.3-2,1-2.7.7-.7,1.6-1.2,2.7-1.6,1.1-.4,2.3-.6,3.5-.8,1.2-.2,2.4-.2,3.5-.2,2.1,0,4.1.4,6,1.3,1.9.9,3.4,2.4,4.6,4.5s1.7,5,1.7,8.6-.5,5.1-1.5,7.1c-1,2-2.4,3.5-4.3,4.6-1.9,1.1-4.2,1.6-6.9,1.6ZM291.9,150.9c1.9,0,3.5-.4,4.8-1.2,1.3-.8,2.2-2,2.8-3.5.6-1.5,1-3.2,1-5.1s-.2-3.7-.6-5.4c-.4-1.7-1.2-3-2.4-4-1.2-1-3-1.5-5.2-1.5s-3.4.2-4.8.6c-1.4.4-2,1-2,1.8v16.4c1.1.6,2.2,1.1,3.3,1.4s2.2.5,3.3.5Z"/>
|
||||
<path d="M311.1,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1c-.8,0-1.6.2-2.4.3-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
|
||||
<path d="M330.5,122.5v-4.2h4.2v4.2h-4.2ZM330.8,153.7v-26.4h3.8v26.4h-3.8Z"/>
|
||||
<path d="M342.7,129.3c.8-.4,1.7-.8,2.6-1.1.9-.3,1.8-.6,2.8-.8.9-.2,1.9-.4,2.9-.5,1-.1,2-.2,2.9-.2,2.6,0,4.6.4,6.1,1.1,1.5.8,2.6,1.9,3.3,3.3.7,1.4,1,3.2,1,5.2v17.2h-3.8v-17.2c0-.6,0-1.3-.2-2-.2-.7-.5-1.4-.9-2-.5-.7-1.2-1.2-2.1-1.6s-2.2-.6-3.8-.6-2.2,0-3.4.3-2.4.4-3.6.8v22.4h-3.8v-24.3Z"/>
|
||||
<path d="M380.7,154.1c-1.9,0-3.4-.6-4.7-1.7-1.3-1.1-1.9-2.9-1.9-5.1v-16.5h-4.6v-3.5h4.6v-7.5h3.8v7.5h6.8v3.5h-6.8v15.3c0,1.5.2,2.6.7,3.3s1.4,1.1,2.8,1.1,1.3,0,1.9-.2,1.1-.3,1.5-.5v3.6c-.5.2-1.1.3-1.9.5s-1.5.2-2.1.2Z"/>
|
||||
<path d="M402,154.4c-2.5,0-4.7-.5-6.5-1.6-1.8-1-3.3-2.6-4.2-4.7-1-2.1-1.5-4.7-1.5-7.8,0-4.6,1-8,3.1-10.3,2.1-2.3,4.9-3.4,8.5-3.4s5.1.6,6.8,1.9c1.7,1.3,2.9,3,3.7,5.1.7,2.2,1.1,4.6,1.1,7.3h-21.3l.3-3.5h18.5l-1.5.5c-.1-2.6-.8-4.6-2-5.9-1.2-1.3-3.1-2-5.6-2s-3.2.3-4.3,1c-1.1.6-2,1.7-2.6,3.3s-.8,3.8-.8,6.6.8,5.7,2.3,7.3c1.5,1.7,3.6,2.5,6.3,2.5s2.5,0,3.6-.3,2.1-.5,3-.8c.9-.4,1.7-.7,2.4-1.2v3.9c-1.3.6-2.7,1.1-4.2,1.4-1.5.3-3.2.5-5.1.5Z"/>
|
||||
<path d="M419.5,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1-1.6.2-2.4.3c-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
|
||||
<path d="M446.4,154.4c-1.9,0-3.5-.2-4.8-.6s-2.6-.9-4-1.6v-4c1.1.6,2.1,1.1,2.9,1.5s1.7.7,2.6.9c.9.2,1.9.3,3,.3,1.8,0,3.2-.4,4.3-1.2,1.1-.8,1.7-1.8,1.7-3s-.3-1.7-.8-2.3-1.2-1-2.1-1.3c-.8-.4-1.7-.7-2.7-1.1-1-.3-2.1-.6-3.1-.9-1-.3-2-.8-2.9-1.3-.9-.5-1.6-1.3-2.1-2.1-.5-.9-.8-2-.8-3.4s.3-2.5.8-3.4c.5-1,1.3-1.7,2.1-2.4.9-.6,1.9-1.1,3-1.4,1.1-.3,2.2-.4,3.3-.4,1.6,0,2.9.2,4.1.6,1.1.4,2.3.9,3.5,1.4v3.8c-1.3-.7-2.5-1.3-3.6-1.7-1.1-.4-2.3-.7-3.8-.7s-2.7.3-3.9.9c-1.1.6-1.7,1.5-1.7,2.7s.3,1.8.9,2.4,1.4,1,2.3,1.4c1,.3,2,.7,3.1,1,.9.3,1.8.6,2.8.9,1,.3,1.8.8,2.7,1.3.8.5,1.5,1.3,2,2.1.5.9.8,2,.8,3.4s-.5,3.4-1.4,4.6-2.2,2.1-3.6,2.7c-1.5.6-3,.8-4.5.8Z"/>
|
||||
</g>
|
||||
</g>
|
||||
</svg>
|
||||
|
After Width: | Height: | Size: 4.7 KiB |
@@ -0,0 +1,28 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<svg id="a" xmlns="http://www.w3.org/2000/svg" width="180.62mm" height="180.62mm" viewBox="0 0 235 244" xmlns:c2pa="http://c2pa.org/manifest">
|
||||
<rect x="0" y="0" width="235" height="244" fill="none"/>
|
||||
<g fill="#ffffff" transform="translate(2,215) scale(0.1)">
|
||||
<g>
|
||||
<path d="M139.4.8l-.2,62c-34.3,0-63.4,21.8-73.2,51.9C26.4,141,.2,187.8.2,241.3H0l.2-101.3C.2,63.1,62.4.8,139.4.8Z"/>
|
||||
<path d="M139.1,92.5l-.8,62.5c-42.6,0-77.1,38.6-77.1,86.3l1-103.9c0-7.9,1.3-15.5,3.6-22.7,21.2-14.1,46.3-22.3,73.2-22.3Z"/>
|
||||
<path d="M65.9,114.7c-2.3,7.2-3.6,14.8-3.6,22.7l-1,103.9H.2c0-53.5,26.3-100.3,65.7-126.6Z"/>
|
||||
</g>
|
||||
<polygon points="202.8 .4 202.8 92.9 226.2 92.9 226.2 56 259.8 56 259.8 36.1 226.2 36.1 226.2 19.4 265.7 19.4 265.7 0 202.8 .4"/>
|
||||
<polygon points="282.3 -.3 282.3 93 346.1 93 346.1 72.4 306.8 72.4 306.8 55.6 341.7 55.6 341.7 36.4 306.5 36.4 306.5 19.6 346.2 19.6 346.2 -.3 282.3 -.3"/>
|
||||
<polygon points="365.9 92.8 429.5 92.8 429.5 70.9 389.6 70.9 389.6 .2 365 .2 365.9 92.8"/>
|
||||
<polygon points="448 0 471.9 0 471.9 92.5 447.5 92.5 448 0"/>
|
||||
<path d="M485.1,92.5s34.7-44.3,33.4-46.5S485.7,0,485.7,0h29l18.4,24.8L550.1,0h26.6l-29.9,45.4,33.1,46.8h-28.8l-19.3-27.4-18.9,28.1-27.9-.4Z"/>
|
||||
<g>
|
||||
<path d="M210.9,154.1c-1.9,0-3.7-.2-5.3-.7-1.6-.4-3-1-4.2-1.6v-3.9c1.1.6,2.4,1.1,3.9,1.6,1.5.5,3.2.7,5.1.7,3.1,0,5.5-.6,7.2-1.7,1.7-1.2,2.5-2.8,2.5-5s-.8-3.9-2.5-5c-1.7-1.2-4.2-1.7-7.4-1.7h-3.9v-3.7h4c2.6,0,4.5-.5,5.9-1.5,1.4-1,2-2.4,2-4.2s-.3-2.3-1-3.1c-.6-.8-1.6-1.5-2.8-1.9-1.3-.4-2.8-.7-4.6-.7s-3,.2-4.3.6c-1.3.4-2.4.8-3.3,1.3v-3.9c1.1-.5,2.3-.9,3.6-1.3,1.3-.4,2.8-.5,4.5-.5s4,.3,5.5.8c1.5.5,2.7,1.3,3.6,2.2.9.9,1.6,1.9,2,3.1.4,1.1.6,2.3.6,3.4s-.2,2.4-.7,3.3c-.5.9-1,1.7-1.6,2.2-.6.6-1.4,1.1-2.3,1.6,1.3.7,2.3,1.4,3.2,2.1s1.6,1.7,2.2,2.8c.6,1.1,1,2.5,1,4.2s-.2,2.5-.7,3.8c-.5,1.2-1.2,2.4-2.2,3.4s-2.4,1.8-4,2.4c-1.7.6-3.7.9-6.1.9Z"/>
|
||||
<path d="M232.1,153.7v-35.4h11.1c5.5,0,9.7,1.5,12.4,4.4,2.8,3,4.2,7.4,4.2,13.2s-1.4,10.3-4.2,13.2c-2.8,3-6.9,4.5-12.4,4.5h-11.1ZM235.9,150h7c4.5,0,7.8-1.1,9.9-3.4,2-2.3,3.1-5.8,3.1-10.7s-1-8.4-3.1-10.7c-2-2.3-5.3-3.4-9.9-3.4h-7v28.2Z"/>
|
||||
<path d="M291.9,154.4c-.8,0-1.7-.1-2.6-.3-1-.2-1.9-.5-2.8-.8-.9-.3-1.7-.7-2.4-1l1.3-1.3v14.2h-3.8v-33.2c0-1.1.3-2,1-2.7.7-.7,1.6-1.2,2.7-1.6,1.1-.4,2.3-.6,3.5-.8,1.2-.2,2.4-.2,3.5-.2,2.1,0,4.1.4,6,1.3,1.9.9,3.4,2.4,4.6,4.5s1.7,5,1.7,8.6-.5,5.1-1.5,7.1c-1,2-2.4,3.5-4.3,4.6-1.9,1.1-4.2,1.6-6.9,1.6ZM291.9,150.9c1.9,0,3.5-.4,4.8-1.2,1.3-.8,2.2-2,2.8-3.5.6-1.5,1-3.2,1-5.1s-.2-3.7-.6-5.4c-.4-1.7-1.2-3-2.4-4-1.2-1-3-1.5-5.2-1.5s-3.4.2-4.8.6c-1.4.4-2,1-2,1.8v16.4c1.1.6,2.2,1.1,3.3,1.4s2.2.5,3.3.5Z"/>
|
||||
<path d="M311.1,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1c-.8,0-1.6.2-2.4.3-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
|
||||
<path d="M330.5,122.5v-4.2h4.2v4.2h-4.2ZM330.8,153.7v-26.4h3.8v26.4h-3.8Z"/>
|
||||
<path d="M342.7,129.3c.8-.4,1.7-.8,2.6-1.1.9-.3,1.8-.6,2.8-.8.9-.2,1.9-.4,2.9-.5,1-.1,2-.2,2.9-.2,2.6,0,4.6.4,6.1,1.1,1.5.8,2.6,1.9,3.3,3.3.7,1.4,1,3.2,1,5.2v17.2h-3.8v-17.2c0-.6,0-1.3-.2-2-.2-.7-.5-1.4-.9-2-.5-.7-1.2-1.2-2.1-1.6s-2.2-.6-3.8-.6-2.2,0-3.4.3-2.4.4-3.6.8v22.4h-3.8v-24.3Z"/>
|
||||
<path d="M380.7,154.1c-1.9,0-3.4-.6-4.7-1.7-1.3-1.1-1.9-2.9-1.9-5.1v-16.5h-4.6v-3.5h4.6v-7.5h3.8v7.5h6.8v3.5h-6.8v15.3c0,1.5.2,2.6.7,3.3s1.4,1.1,2.8,1.1,1.3,0,1.9-.2,1.1-.3,1.5-.5v3.6c-.5.2-1.1.3-1.9.5s-1.5.2-2.1.2Z"/>
|
||||
<path d="M402,154.4c-2.5,0-4.7-.5-6.5-1.6-1.8-1-3.3-2.6-4.2-4.7-1-2.1-1.5-4.7-1.5-7.8,0-4.6,1-8,3.1-10.3,2.1-2.3,4.9-3.4,8.5-3.4s5.1.6,6.8,1.9c1.7,1.3,2.9,3,3.7,5.1.7,2.2,1.1,4.6,1.1,7.3h-21.3l.3-3.5h18.5l-1.5.5c-.1-2.6-.8-4.6-2-5.9-1.2-1.3-3.1-2-5.6-2s-3.2.3-4.3,1c-1.1.6-2,1.7-2.6,3.3s-.8,3.8-.8,6.6.8,5.7,2.3,7.3c1.5,1.7,3.6,2.5,6.3,2.5s2.5,0,3.6-.3,2.1-.5,3-.8c.9-.4,1.7-.7,2.4-1.2v3.9c-1.3.6-2.7,1.1-4.2,1.4-1.5.3-3.2.5-5.1.5Z"/>
|
||||
<path d="M419.5,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1-1.6.2-2.4.3c-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
|
||||
<path d="M446.4,154.4c-1.9,0-3.5-.2-4.8-.6s-2.6-.9-4-1.6v-4c1.1.6,2.1,1.1,2.9,1.5s1.7.7,2.6.9c.9.2,1.9.3,3,.3,1.8,0,3.2-.4,4.3-1.2,1.1-.8,1.7-1.8,1.7-3s-.3-1.7-.8-2.3-1.2-1-2.1-1.3c-.8-.4-1.7-.7-2.7-1.1-1-.3-2.1-.6-3.1-.9-1-.3-2-.8-2.9-1.3-.9-.5-1.6-1.3-2.1-2.1-.5-.9-.8-2-.8-3.4s.3-2.5.8-3.4c.5-1,1.3-1.7,2.1-2.4.9-.6,1.9-1.1,3-1.4,1.1-.3,2.2-.4,3.3-.4,1.6,0,2.9.2,4.1.6,1.1.4,2.3.9,3.5,1.4v3.8c-1.3-.7-2.5-1.3-3.6-1.7-1.1-.4-2.3-.7-3.8-.7s-2.7.3-3.9.9c-1.1.6-1.7,1.5-1.7,2.7s.3,1.8.9,2.4,1.4,1,2.3,1.4c1,.3,2,.7,3.1,1,.9.3,1.8.6,2.8.9,1,.3,1.8.8,2.7,1.3.8.5,1.5,1.3,2,2.1.5.9.8,2,.8,3.4s-.5,3.4-1.4,4.6-2.2,2.1-3.6,2.7c-1.5.6-3,.8-4.5.8Z"/>
|
||||
</g>
|
||||
</g>
|
||||
</svg>
|
||||
|
After Width: | Height: | Size: 4.7 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 1023 KiB |
@@ -0,0 +1,28 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<svg id="a" xmlns="http://www.w3.org/2000/svg" width="180.62mm" height="180.62mm" viewBox="0 0 600 400" xmlns:c2pa="http://c2pa.org/manifest">
|
||||
<rect x="0" y="0" width="600" height="400" fill="none"/>
|
||||
<g fill="#ffffff" transform="translate(4,357) scale(0.16)">
|
||||
<g>
|
||||
<path d="M139.4.8l-.2,62c-34.3,0-63.4,21.8-73.2,51.9C26.4,141,.2,187.8.2,241.3H0l.2-101.3C.2,63.1,62.4.8,139.4.8Z"/>
|
||||
<path d="M139.1,92.5l-.8,62.5c-42.6,0-77.1,38.6-77.1,86.3l1-103.9c0-7.9,1.3-15.5,3.6-22.7,21.2-14.1,46.3-22.3,73.2-22.3Z"/>
|
||||
<path d="M65.9,114.7c-2.3,7.2-3.6,14.8-3.6,22.7l-1,103.9H.2c0-53.5,26.3-100.3,65.7-126.6Z"/>
|
||||
</g>
|
||||
<polygon points="202.8 .4 202.8 92.9 226.2 92.9 226.2 56 259.8 56 259.8 36.1 226.2 36.1 226.2 19.4 265.7 19.4 265.7 0 202.8 .4"/>
|
||||
<polygon points="282.3 -.3 282.3 93 346.1 93 346.1 72.4 306.8 72.4 306.8 55.6 341.7 55.6 341.7 36.4 306.5 36.4 306.5 19.6 346.2 19.6 346.2 -.3 282.3 -.3"/>
|
||||
<polygon points="365.9 92.8 429.5 92.8 429.5 70.9 389.6 70.9 389.6 .2 365 .2 365.9 92.8"/>
|
||||
<polygon points="448 0 471.9 0 471.9 92.5 447.5 92.5 448 0"/>
|
||||
<path d="M485.1,92.5s34.7-44.3,33.4-46.5S485.7,0,485.7,0h29l18.4,24.8L550.1,0h26.6l-29.9,45.4,33.1,46.8h-28.8l-19.3-27.4-18.9,28.1-27.9-.4Z"/>
|
||||
<g>
|
||||
<path d="M210.9,154.1c-1.9,0-3.7-.2-5.3-.7-1.6-.4-3-1-4.2-1.6v-3.9c1.1.6,2.4,1.1,3.9,1.6,1.5.5,3.2.7,5.1.7,3.1,0,5.5-.6,7.2-1.7,1.7-1.2,2.5-2.8,2.5-5s-.8-3.9-2.5-5c-1.7-1.2-4.2-1.7-7.4-1.7h-3.9v-3.7h4c2.6,0,4.5-.5,5.9-1.5,1.4-1,2-2.4,2-4.2s-.3-2.3-1-3.1c-.6-.8-1.6-1.5-2.8-1.9-1.3-.4-2.8-.7-4.6-.7s-3,.2-4.3.6c-1.3.4-2.4.8-3.3,1.3v-3.9c1.1-.5,2.3-.9,3.6-1.3,1.3-.4,2.8-.5,4.5-.5s4,.3,5.5.8c1.5.5,2.7,1.3,3.6,2.2.9.9,1.6,1.9,2,3.1.4,1.1.6,2.3.6,3.4s-.2,2.4-.7,3.3c-.5.9-1,1.7-1.6,2.2-.6.6-1.4,1.1-2.3,1.6,1.3.7,2.3,1.4,3.2,2.1s1.6,1.7,2.2,2.8c.6,1.1,1,2.5,1,4.2s-.2,2.5-.7,3.8c-.5,1.2-1.2,2.4-2.2,3.4s-2.4,1.8-4,2.4c-1.7.6-3.7.9-6.1.9Z"/>
|
||||
<path d="M232.1,153.7v-35.4h11.1c5.5,0,9.7,1.5,12.4,4.4,2.8,3,4.2,7.4,4.2,13.2s-1.4,10.3-4.2,13.2c-2.8,3-6.9,4.5-12.4,4.5h-11.1ZM235.9,150h7c4.5,0,7.8-1.1,9.9-3.4,2-2.3,3.1-5.8,3.1-10.7s-1-8.4-3.1-10.7c-2-2.3-5.3-3.4-9.9-3.4h-7v28.2Z"/>
|
||||
<path d="M291.9,154.4c-.8,0-1.7-.1-2.6-.3-1-.2-1.9-.5-2.8-.8-.9-.3-1.7-.7-2.4-1l1.3-1.3v14.2h-3.8v-33.2c0-1.1.3-2,1-2.7.7-.7,1.6-1.2,2.7-1.6,1.1-.4,2.3-.6,3.5-.8,1.2-.2,2.4-.2,3.5-.2,2.1,0,4.1.4,6,1.3,1.9.9,3.4,2.4,4.6,4.5s1.7,5,1.7,8.6-.5,5.1-1.5,7.1c-1,2-2.4,3.5-4.3,4.6-1.9,1.1-4.2,1.6-6.9,1.6ZM291.9,150.9c1.9,0,3.5-.4,4.8-1.2,1.3-.8,2.2-2,2.8-3.5.6-1.5,1-3.2,1-5.1s-.2-3.7-.6-5.4c-.4-1.7-1.2-3-2.4-4-1.2-1-3-1.5-5.2-1.5s-3.4.2-4.8.6c-1.4.4-2,1-2,1.8v16.4c1.1.6,2.2,1.1,3.3,1.4s2.2.5,3.3.5Z"/>
|
||||
<path d="M311.1,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1c-.8,0-1.6.2-2.4.3-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
|
||||
<path d="M330.5,122.5v-4.2h4.2v4.2h-4.2ZM330.8,153.7v-26.4h3.8v26.4h-3.8Z"/>
|
||||
<path d="M342.7,129.3c.8-.4,1.7-.8,2.6-1.1.9-.3,1.8-.6,2.8-.8.9-.2,1.9-.4,2.9-.5,1-.1,2-.2,2.9-.2,2.6,0,4.6.4,6.1,1.1,1.5.8,2.6,1.9,3.3,3.3.7,1.4,1,3.2,1,5.2v17.2h-3.8v-17.2c0-.6,0-1.3-.2-2-.2-.7-.5-1.4-.9-2-.5-.7-1.2-1.2-2.1-1.6s-2.2-.6-3.8-.6-2.2,0-3.4.3-2.4.4-3.6.8v22.4h-3.8v-24.3Z"/>
|
||||
<path d="M380.7,154.1c-1.9,0-3.4-.6-4.7-1.7-1.3-1.1-1.9-2.9-1.9-5.1v-16.5h-4.6v-3.5h4.6v-7.5h3.8v7.5h6.8v3.5h-6.8v15.3c0,1.5.2,2.6.7,3.3s1.4,1.1,2.8,1.1,1.3,0,1.9-.2,1.1-.3,1.5-.5v3.6c-.5.2-1.1.3-1.9.5s-1.5.2-2.1.2Z"/>
|
||||
<path d="M402,154.4c-2.5,0-4.7-.5-6.5-1.6-1.8-1-3.3-2.6-4.2-4.7-1-2.1-1.5-4.7-1.5-7.8,0-4.6,1-8,3.1-10.3,2.1-2.3,4.9-3.4,8.5-3.4s5.1.6,6.8,1.9c1.7,1.3,2.9,3,3.7,5.1.7,2.2,1.1,4.6,1.1,7.3h-21.3l.3-3.5h18.5l-1.5.5c-.1-2.6-.8-4.6-2-5.9-1.2-1.3-3.1-2-5.6-2s-3.2.3-4.3,1c-1.1.6-2,1.7-2.6,3.3s-.8,3.8-.8,6.6.8,5.7,2.3,7.3c1.5,1.7,3.6,2.5,6.3,2.5s2.5,0,3.6-.3,2.1-.5,3-.8c.9-.4,1.7-.7,2.4-1.2v3.9c-1.3.6-2.7,1.1-4.2,1.4-1.5.3-3.2.5-5.1.5Z"/>
|
||||
<path d="M419.5,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1-1.6.2-2.4.3c-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
|
||||
<path d="M446.4,154.4c-1.9,0-3.5-.2-4.8-.6s-2.6-.9-4-1.6v-4c1.1.6,2.1,1.1,2.9,1.5s1.7.7,2.6.9c.9.2,1.9.3,3,.3,1.8,0,3.2-.4,4.3-1.2,1.1-.8,1.7-1.8,1.7-3s-.3-1.7-.8-2.3-1.2-1-2.1-1.3c-.8-.4-1.7-.7-2.7-1.1-1-.3-2.1-.6-3.1-.9-1-.3-2-.8-2.9-1.3-.9-.5-1.6-1.3-2.1-2.1-.5-.9-.8-2-.8-3.4s.3-2.5.8-3.4c.5-1,1.3-1.7,2.1-2.4.9-.6,1.9-1.1,3-1.4,1.1-.3,2.2-.4,3.3-.4,1.6,0,2.9.2,4.1.6,1.1.4,2.3.9,3.5,1.4v3.8c-1.3-.7-2.5-1.3-3.6-1.7-1.1-.4-2.3-.7-3.8-.7s-2.7.3-3.9.9c-1.1.6-1.7,1.5-1.7,2.7s.3,1.8.9,2.4,1.4,1,2.3,1.4c1,.3,2,.7,3.1,1,.9.3,1.8.6,2.8.9,1,.3,1.8.8,2.7,1.3.8.5,1.5,1.3,2,2.1.5.9.8,2,.8,3.4s-.5,3.4-1.4,4.6-2.2,2.1-3.6,2.7c-1.5.6-3,.8-4.5.8Z"/>
|
||||
</g>
|
||||
</g>
|
||||
</svg>
|
||||
|
After Width: | Height: | Size: 4.7 KiB |
@@ -0,0 +1,28 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<svg id="a" xmlns="http://www.w3.org/2000/svg" width="180.62mm" height="180.62mm" viewBox="0 0 205 255" xmlns:c2pa="http://c2pa.org/manifest">
|
||||
<rect x="0" y="0" width="205" height="255" fill="none"/>
|
||||
<g fill="#ffffff" transform="translate(3,228) scale(0.1)">
|
||||
<g>
|
||||
<path d="M139.4.8l-.2,62c-34.3,0-63.4,21.8-73.2,51.9C26.4,141,.2,187.8.2,241.3H0l.2-101.3C.2,63.1,62.4.8,139.4.8Z"/>
|
||||
<path d="M139.1,92.5l-.8,62.5c-42.6,0-77.1,38.6-77.1,86.3l1-103.9c0-7.9,1.3-15.5,3.6-22.7,21.2-14.1,46.3-22.3,73.2-22.3Z"/>
|
||||
<path d="M65.9,114.7c-2.3,7.2-3.6,14.8-3.6,22.7l-1,103.9H.2c0-53.5,26.3-100.3,65.7-126.6Z"/>
|
||||
</g>
|
||||
<polygon points="202.8 .4 202.8 92.9 226.2 92.9 226.2 56 259.8 56 259.8 36.1 226.2 36.1 226.2 19.4 265.7 19.4 265.7 0 202.8 .4"/>
|
||||
<polygon points="282.3 -.3 282.3 93 346.1 93 346.1 72.4 306.8 72.4 306.8 55.6 341.7 55.6 341.7 36.4 306.5 36.4 306.5 19.6 346.2 19.6 346.2 -.3 282.3 -.3"/>
|
||||
<polygon points="365.9 92.8 429.5 92.8 429.5 70.9 389.6 70.9 389.6 .2 365 .2 365.9 92.8"/>
|
||||
<polygon points="448 0 471.9 0 471.9 92.5 447.5 92.5 448 0"/>
|
||||
<path d="M485.1,92.5s34.7-44.3,33.4-46.5S485.7,0,485.7,0h29l18.4,24.8L550.1,0h26.6l-29.9,45.4,33.1,46.8h-28.8l-19.3-27.4-18.9,28.1-27.9-.4Z"/>
|
||||
<g>
|
||||
<path d="M210.9,154.1c-1.9,0-3.7-.2-5.3-.7-1.6-.4-3-1-4.2-1.6v-3.9c1.1.6,2.4,1.1,3.9,1.6,1.5.5,3.2.7,5.1.7,3.1,0,5.5-.6,7.2-1.7,1.7-1.2,2.5-2.8,2.5-5s-.8-3.9-2.5-5c-1.7-1.2-4.2-1.7-7.4-1.7h-3.9v-3.7h4c2.6,0,4.5-.5,5.9-1.5,1.4-1,2-2.4,2-4.2s-.3-2.3-1-3.1c-.6-.8-1.6-1.5-2.8-1.9-1.3-.4-2.8-.7-4.6-.7s-3,.2-4.3.6c-1.3.4-2.4.8-3.3,1.3v-3.9c1.1-.5,2.3-.9,3.6-1.3,1.3-.4,2.8-.5,4.5-.5s4,.3,5.5.8c1.5.5,2.7,1.3,3.6,2.2.9.9,1.6,1.9,2,3.1.4,1.1.6,2.3.6,3.4s-.2,2.4-.7,3.3c-.5.9-1,1.7-1.6,2.2-.6.6-1.4,1.1-2.3,1.6,1.3.7,2.3,1.4,3.2,2.1s1.6,1.7,2.2,2.8c.6,1.1,1,2.5,1,4.2s-.2,2.5-.7,3.8c-.5,1.2-1.2,2.4-2.2,3.4s-2.4,1.8-4,2.4c-1.7.6-3.7.9-6.1.9Z"/>
|
||||
<path d="M232.1,153.7v-35.4h11.1c5.5,0,9.7,1.5,12.4,4.4,2.8,3,4.2,7.4,4.2,13.2s-1.4,10.3-4.2,13.2c-2.8,3-6.9,4.5-12.4,4.5h-11.1ZM235.9,150h7c4.5,0,7.8-1.1,9.9-3.4,2-2.3,3.1-5.8,3.1-10.7s-1-8.4-3.1-10.7c-2-2.3-5.3-3.4-9.9-3.4h-7v28.2Z"/>
|
||||
<path d="M291.9,154.4c-.8,0-1.7-.1-2.6-.3-1-.2-1.9-.5-2.8-.8-.9-.3-1.7-.7-2.4-1l1.3-1.3v14.2h-3.8v-33.2c0-1.1.3-2,1-2.7.7-.7,1.6-1.2,2.7-1.6,1.1-.4,2.3-.6,3.5-.8,1.2-.2,2.4-.2,3.5-.2,2.1,0,4.1.4,6,1.3,1.9.9,3.4,2.4,4.6,4.5s1.7,5,1.7,8.6-.5,5.1-1.5,7.1c-1,2-2.4,3.5-4.3,4.6-1.9,1.1-4.2,1.6-6.9,1.6ZM291.9,150.9c1.9,0,3.5-.4,4.8-1.2,1.3-.8,2.2-2,2.8-3.5.6-1.5,1-3.2,1-5.1s-.2-3.7-.6-5.4c-.4-1.7-1.2-3-2.4-4-1.2-1-3-1.5-5.2-1.5s-3.4.2-4.8.6c-1.4.4-2,1-2,1.8v16.4c1.1.6,2.2,1.1,3.3,1.4s2.2.5,3.3.5Z"/>
|
||||
<path d="M311.1,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1c-.8,0-1.6.2-2.4.3-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
|
||||
<path d="M330.5,122.5v-4.2h4.2v4.2h-4.2ZM330.8,153.7v-26.4h3.8v26.4h-3.8Z"/>
|
||||
<path d="M342.7,129.3c.8-.4,1.7-.8,2.6-1.1.9-.3,1.8-.6,2.8-.8.9-.2,1.9-.4,2.9-.5,1-.1,2-.2,2.9-.2,2.6,0,4.6.4,6.1,1.1,1.5.8,2.6,1.9,3.3,3.3.7,1.4,1,3.2,1,5.2v17.2h-3.8v-17.2c0-.6,0-1.3-.2-2-.2-.7-.5-1.4-.9-2-.5-.7-1.2-1.2-2.1-1.6s-2.2-.6-3.8-.6-2.2,0-3.4.3-2.4.4-3.6.8v22.4h-3.8v-24.3Z"/>
|
||||
<path d="M380.7,154.1c-1.9,0-3.4-.6-4.7-1.7-1.3-1.1-1.9-2.9-1.9-5.1v-16.5h-4.6v-3.5h4.6v-7.5h3.8v7.5h6.8v3.5h-6.8v15.3c0,1.5.2,2.6.7,3.3s1.4,1.1,2.8,1.1,1.3,0,1.9-.2,1.1-.3,1.5-.5v3.6c-.5.2-1.1.3-1.9.5s-1.5.2-2.1.2Z"/>
|
||||
<path d="M402,154.4c-2.5,0-4.7-.5-6.5-1.6-1.8-1-3.3-2.6-4.2-4.7-1-2.1-1.5-4.7-1.5-7.8,0-4.6,1-8,3.1-10.3,2.1-2.3,4.9-3.4,8.5-3.4s5.1.6,6.8,1.9c1.7,1.3,2.9,3,3.7,5.1.7,2.2,1.1,4.6,1.1,7.3h-21.3l.3-3.5h18.5l-1.5.5c-.1-2.6-.8-4.6-2-5.9-1.2-1.3-3.1-2-5.6-2s-3.2.3-4.3,1c-1.1.6-2,1.7-2.6,3.3s-.8,3.8-.8,6.6.8,5.7,2.3,7.3c1.5,1.7,3.6,2.5,6.3,2.5s2.5,0,3.6-.3,2.1-.5,3-.8c.9-.4,1.7-.7,2.4-1.2v3.9c-1.3.6-2.7,1.1-4.2,1.4-1.5.3-3.2.5-5.1.5Z"/>
|
||||
<path d="M419.5,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1-1.6.2-2.4.3c-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
|
||||
<path d="M446.4,154.4c-1.9,0-3.5-.2-4.8-.6s-2.6-.9-4-1.6v-4c1.1.6,2.1,1.1,2.9,1.5s1.7.7,2.6.9c.9.2,1.9.3,3,.3,1.8,0,3.2-.4,4.3-1.2,1.1-.8,1.7-1.8,1.7-3s-.3-1.7-.8-2.3-1.2-1-2.1-1.3c-.8-.4-1.7-.7-2.7-1.1-1-.3-2.1-.6-3.1-.9-1-.3-2-.8-2.9-1.3-.9-.5-1.6-1.3-2.1-2.1-.5-.9-.8-2-.8-3.4s.3-2.5.8-3.4c.5-1,1.3-1.7,2.1-2.4.9-.6,1.9-1.1,3-1.4,1.1-.3,2.2-.4,3.3-.4,1.6,0,2.9.2,4.1.6,1.1.4,2.3.9,3.5,1.4v3.8c-1.3-.7-2.5-1.3-3.6-1.7-1.1-.4-2.3-.7-3.8-.7s-2.7.3-3.9.9c-1.1.6-1.7,1.5-1.7,2.7s.3,1.8.9,2.4,1.4,1,2.3,1.4c1,.3,2,.7,3.1,1,.9.3,1.8.6,2.8.9,1,.3,1.8.8,2.7,1.3.8.5,1.5,1.3,2,2.1.5.9.8,2,.8,3.4s-.5,3.4-1.4,4.6-2.2,2.1-3.6,2.7c-1.5.6-3,.8-4.5.8Z"/>
|
||||
</g>
|
||||
</g>
|
||||
</svg>
|
||||
|
After Width: | Height: | Size: 4.7 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 611 KiB |
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Medium Plastic Syringe @0.50mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "IQnumbi0N4BnvMfO",
|
||||
"filament_id": "OFAzgHcF",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 0.50mm nozzle",
|
||||
"FELIX Food Double 0.50mm nozzle",
|
||||
"FELIX Food Switch 0.50mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"31.22"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.05"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"3.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"6.0"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"0.75"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"7.2"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Medium Plastic Syringe @1.00mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "p8CG6dHMUxNl7iPL",
|
||||
"filament_id": "OFAzgHcF",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 1.00mm nozzle",
|
||||
"FELIX Food Double 1.00mm nozzle",
|
||||
"FELIX Food Switch 1.00mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"31.22"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.05"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"3.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"6.0"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"1.5"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"27.0"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Medium Plastic Syringe @2.00mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "s5uPS7I3E57tiRRC",
|
||||
"filament_id": "OFAzgHcF",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 2.00mm nozzle",
|
||||
"FELIX Food Double 2.00mm nozzle",
|
||||
"FELIX Food Switch 2.00mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"31.22"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.05"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"3.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"6.0"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"3.0"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"108.0"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Medium Plastic Syringe @3.00mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "zlZtghh6ytU7N09m",
|
||||
"filament_id": "OFAzgHcF",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 3.00mm nozzle",
|
||||
"FELIX Food Double 3.00mm nozzle",
|
||||
"FELIX Food Switch 3.00mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"31.22"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.05"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"3.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"6.0"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"4.5"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"216.0"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Medium Plastic Syringe @4.00mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "fvTZEcREMbs3JW1D",
|
||||
"filament_id": "OFAzgHcF",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 4.00mm nozzle",
|
||||
"FELIX Food Double 4.00mm nozzle",
|
||||
"FELIX Food Switch 4.00mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"31.22"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.05"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"3.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"6.0"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"6.0"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"432.0"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Medium Stainless Steel Syringe @0.50mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "2XyqnzMqyuRCqpPq",
|
||||
"filament_id": "OFqZSD1S",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 0.50mm nozzle",
|
||||
"FELIX Food Double 0.50mm nozzle",
|
||||
"FELIX Food Switch 0.50mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"25.4"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.05"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"10.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"10.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"2.0"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"0.75"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"7.2"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Medium Stainless Steel Syringe @1.00mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "yNxVUGOb1kUbXLiw",
|
||||
"filament_id": "OFqZSD1S",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 1.00mm nozzle",
|
||||
"FELIX Food Double 1.00mm nozzle",
|
||||
"FELIX Food Switch 1.00mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"25.4"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.05"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"10.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"10.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"2.0"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"1.5"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"27.0"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Medium Stainless Steel Syringe @2.00mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "4MhgYDnGFKLfurhc",
|
||||
"filament_id": "OFqZSD1S",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 2.00mm nozzle",
|
||||
"FELIX Food Double 2.00mm nozzle",
|
||||
"FELIX Food Switch 2.00mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"25.4"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.05"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"10.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"10.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"2.0"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"3.0"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"108.0"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Medium Stainless Steel Syringe @3.00mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "mEH3Rgzzwjq9iptd",
|
||||
"filament_id": "OFqZSD1S",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 3.00mm nozzle",
|
||||
"FELIX Food Double 3.00mm nozzle",
|
||||
"FELIX Food Switch 3.00mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"25.4"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.05"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"10.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"10.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"2.0"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"4.5"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"216.0"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Medium Stainless Steel Syringe @4.00mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "rJsNSIb8w9kOwhwE",
|
||||
"filament_id": "OFqZSD1S",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 4.00mm nozzle",
|
||||
"FELIX Food Double 4.00mm nozzle",
|
||||
"FELIX Food Switch 4.00mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"25.4"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.05"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"10.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"10.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"2.0"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"6.0"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"432.0"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Thick Stainless Steel Syringe @0.50mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "dJzDnkh8Kyn3phhF",
|
||||
"filament_id": "OFjXHG0Z",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 0.50mm nozzle",
|
||||
"FELIX Food Double 0.50mm nozzle",
|
||||
"FELIX Food Switch 0.50mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"25.4"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.02"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"2.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"4.0"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"0.75"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"4.8"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Thick Stainless Steel Syringe @1.00mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "QQi61sD4rX2jELMa",
|
||||
"filament_id": "OFjXHG0Z",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 1.00mm nozzle",
|
||||
"FELIX Food Double 1.00mm nozzle",
|
||||
"FELIX Food Switch 1.00mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"25.4"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.02"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"2.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"4.0"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"1.5"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"18.0"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Thick Stainless Steel Syringe @2.00mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "KUmfC5HZL2hXPfey",
|
||||
"filament_id": "OFjXHG0Z",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 2.00mm nozzle",
|
||||
"FELIX Food Double 2.00mm nozzle",
|
||||
"FELIX Food Switch 2.00mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"25.4"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.02"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"2.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"4.0"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"3.0"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"72.0"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Thick Stainless Steel Syringe @3.00mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "0BbaSUre1bztrKB0",
|
||||
"filament_id": "OFjXHG0Z",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 3.00mm nozzle",
|
||||
"FELIX Food Double 3.00mm nozzle",
|
||||
"FELIX Food Switch 3.00mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"25.4"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.02"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"2.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"4.0"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"4.5"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"144.0"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Thick Stainless Steel Syringe @4.00mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "b179BTbFqjhnsHPT",
|
||||
"filament_id": "OFjXHG0Z",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 4.00mm nozzle",
|
||||
"FELIX Food Double 4.00mm nozzle",
|
||||
"FELIX Food Switch 4.00mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"25.4"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.02"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"2.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"4.0"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"6.0"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"288.0"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Thin Plastic Syringe @0.50mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "dBTTG8HJRYb7GHqy",
|
||||
"filament_id": "OF0kP94Y",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 0.50mm nozzle",
|
||||
"FELIX Food Double 0.50mm nozzle",
|
||||
"FELIX Food Switch 0.50mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"31.22"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.1"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.75"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"1.5"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"0.75"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"10.8"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Thin Plastic Syringe @1.00mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "FITfR7iepAteWuno",
|
||||
"filament_id": "OF0kP94Y",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 1.00mm nozzle",
|
||||
"FELIX Food Double 1.00mm nozzle",
|
||||
"FELIX Food Switch 1.00mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"31.22"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.1"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.75"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"1.5"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"1.5"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"40.5"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Thin Plastic Syringe @2.00mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "i2DZouQfWUnIm4R5",
|
||||
"filament_id": "OF0kP94Y",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 2.00mm nozzle",
|
||||
"FELIX Food Double 2.00mm nozzle",
|
||||
"FELIX Food Switch 2.00mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"31.22"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.1"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.75"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"1.5"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"3.0"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"162.0"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Thin Plastic Syringe @3.00mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "EzV8T0DVT0NRPa7P",
|
||||
"filament_id": "OF0kP94Y",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 3.00mm nozzle",
|
||||
"FELIX Food Double 3.00mm nozzle",
|
||||
"FELIX Food Switch 3.00mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"31.22"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.1"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.75"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"1.5"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"4.5"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"324.0"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Thin Plastic Syringe @4.00mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "Q6msqrC9TM0un5qw",
|
||||
"filament_id": "OF0kP94Y",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 4.00mm nozzle",
|
||||
"FELIX Food Double 4.00mm nozzle",
|
||||
"FELIX Food Switch 4.00mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"31.22"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.1"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.75"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"1.5"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"6.0"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"648.0"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Thin Stainless Steel Syringe @0.50mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "I9W6tiEnRSMrkyzl",
|
||||
"filament_id": "OF40XIE8",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 0.50mm nozzle",
|
||||
"FELIX Food Double 0.50mm nozzle",
|
||||
"FELIX Food Switch 0.50mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"25.4"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.1"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.2"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"10.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"10.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"0.4"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"0.75"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"10.8"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Thin Stainless Steel Syringe @1.00mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "PJpJ8TTlDajNrRJo",
|
||||
"filament_id": "OF40XIE8",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 1.00mm nozzle",
|
||||
"FELIX Food Double 1.00mm nozzle",
|
||||
"FELIX Food Switch 1.00mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"25.4"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.1"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.2"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"10.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"10.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"0.4"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"1.5"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"40.5"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Thin Stainless Steel Syringe @2.00mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "s3GOL7BWdRbaV4GM",
|
||||
"filament_id": "OF40XIE8",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 2.00mm nozzle",
|
||||
"FELIX Food Double 2.00mm nozzle",
|
||||
"FELIX Food Switch 2.00mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"25.4"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.1"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.2"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"10.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"10.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"0.4"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"3.0"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"162.0"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Thin Stainless Steel Syringe @3.00mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "WKPEMCVctL0c5FFi",
|
||||
"filament_id": "OF40XIE8",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 3.00mm nozzle",
|
||||
"FELIX Food Double 3.00mm nozzle",
|
||||
"FELIX Food Switch 3.00mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"25.4"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.1"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.2"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"10.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"10.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"0.4"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"4.5"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"324.0"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Thin Stainless Steel Syringe @4.00mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "I5UEkm93zhn9hdMF",
|
||||
"filament_id": "OF40XIE8",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 4.00mm nozzle",
|
||||
"FELIX Food Double 4.00mm nozzle",
|
||||
"FELIX Food Switch 4.00mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"25.4"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.1"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.2"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"10.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"10.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"0.4"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"6.0"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"648.0"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Very Thick Stainless Steel Syringe @1.00mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "OIZKSwXaRY7WZecX",
|
||||
"filament_id": "OF0xT5HR",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 1.00mm nozzle",
|
||||
"FELIX Food Double 1.00mm nozzle",
|
||||
"FELIX Food Switch 1.00mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"25.4"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"2.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"4.0"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"0.75"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"13.5"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Very Thick Stainless Steel Syringe @2.00mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "al27KBjL9MAi3ri9",
|
||||
"filament_id": "OF0xT5HR",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 2.00mm nozzle",
|
||||
"FELIX Food Double 2.00mm nozzle",
|
||||
"FELIX Food Switch 2.00mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"25.4"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"2.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"4.0"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"1.5"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"53.0"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Very Thick Stainless Steel Syringe @3.00mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "42ADzpr7vGuh3AKC",
|
||||
"filament_id": "OF0xT5HR",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 3.00mm nozzle",
|
||||
"FELIX Food Double 3.00mm nozzle",
|
||||
"FELIX Food Switch 3.00mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"25.4"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"2.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"4.0"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"3.0"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"108.0"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Very Thick Stainless Steel Syringe @4.00mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "FpQC7Cf5qnW1E2QO",
|
||||
"filament_id": "OF0xT5HR",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 4.00mm nozzle",
|
||||
"FELIX Food Double 4.00mm nozzle",
|
||||
"FELIX Food Switch 4.00mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"25.4"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"2.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"4.0"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"4.5"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"216.0"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Very Thin Plastic Syringe @0.50mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "9OMbRBrVCyDD6A2k",
|
||||
"filament_id": "OF1XcHqz",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 0.50mm nozzle",
|
||||
"FELIX Food Double 0.50mm nozzle",
|
||||
"FELIX Food Switch 0.50mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"31.22"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.5"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.03"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"0.75"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"14.4"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Very Thin Plastic Syringe @1.00mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "ukd2jpvA1sHePEfs",
|
||||
"filament_id": "OF1XcHqz",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 1.00mm nozzle",
|
||||
"FELIX Food Double 1.00mm nozzle",
|
||||
"FELIX Food Switch 1.00mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"31.22"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.5"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.03"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"1.5"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"54.0"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Very Thin Plastic Syringe @2.00mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "jXkY0MPClCiaCJGC",
|
||||
"filament_id": "OF1XcHqz",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 2.00mm nozzle",
|
||||
"FELIX Food Double 2.00mm nozzle",
|
||||
"FELIX Food Switch 2.00mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"31.22"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.5"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.03"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"3.0"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"218.0"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Very Thin Plastic Syringe @3.00mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "jSTp7ePK9UKaNX3S",
|
||||
"filament_id": "OF1XcHqz",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 3.00mm nozzle",
|
||||
"FELIX Food Double 3.00mm nozzle",
|
||||
"FELIX Food Switch 3.00mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"31.22"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.5"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.03"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"4.5"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"432.0"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Very Thin Plastic Syringe @4.00mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "q3tLnporrSrlZl6S",
|
||||
"filament_id": "OF1XcHqz",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 4.00mm nozzle",
|
||||
"FELIX Food Double 4.00mm nozzle",
|
||||
"FELIX Food Switch 4.00mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"31.22"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.5"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.03"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"6.0"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"864.0"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Very Thin Stainless Steel Syringe @1.00mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "ZGtJ5dq6QEFrRzER",
|
||||
"filament_id": "OFJDz9xO",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 1.00mm nozzle",
|
||||
"FELIX Food Double 1.00mm nozzle",
|
||||
"FELIX Food Switch 1.00mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"25.4"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.96"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.1"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.03"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"0.2"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.03"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"1.5"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"54.0"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Very Thin Stainless Steel Syringe @2.00mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "il7EvApOb39ReoAt",
|
||||
"filament_id": "OFJDz9xO",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 2.00mm nozzle",
|
||||
"FELIX Food Double 2.00mm nozzle",
|
||||
"FELIX Food Switch 2.00mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"25.4"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.96"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.1"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.03"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"0.2"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.03"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"3.0"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"216.0"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Very Thin Stainless Steel Syringe @3.00mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "yTSl3aV0S2HD6zPy",
|
||||
"filament_id": "OFJDz9xO",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 3.00mm nozzle",
|
||||
"FELIX Food Double 3.00mm nozzle",
|
||||
"FELIX Food Switch 3.00mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"25.4"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.96"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.1"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.03"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"0.2"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.03"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"4.5"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"432.0"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Very Thin Stainless Steel Syringe @4.00mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "JfnwH4HjP0CQKuyr",
|
||||
"filament_id": "OFJDz9xO",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 4.00mm nozzle",
|
||||
"FELIX Food Double 4.00mm nozzle",
|
||||
"FELIX Food Switch 4.00mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"25.4"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.96"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.1"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.03"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"0.2"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.03"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"6.0"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"864.0"
|
||||
]
|
||||
}
|
||||
+47
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Food Very Thin Stainless Steel Syringe @0.50mm",
|
||||
"inherits": "fdm_filament_food",
|
||||
"from": "system",
|
||||
"setting_id": "mIgwxwB2N67qAhxk",
|
||||
"filament_id": "OFASY29j",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Food Single 0.50mm nozzle",
|
||||
"FELIX Food Double 0.50mm nozzle",
|
||||
"FELIX Food Switch 0.50mm nozzle"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"25.4"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.96"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.1"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.03"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"5.0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"0.2"
|
||||
],
|
||||
"filament_retract_restart_extra_toolchange": [
|
||||
"0.03"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"0.75"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"14.4"
|
||||
]
|
||||
}
|
||||
+81
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "FELIX FLEX Brass @ 0.35mm",
|
||||
"inherits": "fdm_filament_flex",
|
||||
"from": "system",
|
||||
"setting_id": "UXX0sEaoqZvdXwi6",
|
||||
"filament_id": "OFF6vK3j",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Pro 3 0.35mm nozzle",
|
||||
"FELIX Pro L 3.0 0.35mm nozzle",
|
||||
"FELIX Pro XL 3.0 0.35mm nozzle",
|
||||
"FELIX Tec 4 0.35mm nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"215.0"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"215.0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"40.0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"40.0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"40.0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"40.0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"40.0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"40.0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"40.0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"40.0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"28.0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"120"
|
||||
],
|
||||
"filament_retract_length": [
|
||||
"2.2"
|
||||
],
|
||||
"filament_retract_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.05"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.38"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
]
|
||||
}
|
||||
+81
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "FELIX FLEX Brass @ 0.50mm",
|
||||
"inherits": "fdm_filament_flex",
|
||||
"from": "system",
|
||||
"setting_id": "B4AmHHxdvhsjN34a",
|
||||
"filament_id": "OFF6vK3j",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Pro 3 0.50mm nozzle",
|
||||
"FELIX Pro L 3.0 0.50mm nozzle",
|
||||
"FELIX Pro XL 3.0 0.50mm nozzle",
|
||||
"FELIX Tec 4 0.50mm nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"215.0"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"215.0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"40.0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"40.0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"40.0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"40.0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"40.0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"40.0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"40.0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"40.0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"28.0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"120"
|
||||
],
|
||||
"filament_retract_length": [
|
||||
"2.2"
|
||||
],
|
||||
"filament_retract_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.05"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.38"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
]
|
||||
}
|
||||
+81
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "FELIX FLEX Hardened Steel @ 0.25mm",
|
||||
"inherits": "fdm_filament_flex",
|
||||
"from": "system",
|
||||
"setting_id": "7z6rkaF5DBbiccZP",
|
||||
"filament_id": "OFSOY4F3",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Pro 3 0.25mm nozzle",
|
||||
"FELIX Pro L 3.0 0.25mm nozzle",
|
||||
"FELIX Pro XL 3.0 0.25mm nozzle",
|
||||
"FELIX Tec 4 0.25mm nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"225.0"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"225.0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"40.0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"40.0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"40.0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"40.0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"40.0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"40.0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"40.0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"40.0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"28.0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"120"
|
||||
],
|
||||
"filament_retract_length": [
|
||||
"2.2"
|
||||
],
|
||||
"filament_retract_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.05"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.38"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
]
|
||||
}
|
||||
+81
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "FELIX FLEX Hardened Steel @ 0.35mm",
|
||||
"inherits": "fdm_filament_flex",
|
||||
"from": "system",
|
||||
"setting_id": "DJRiMo6Aq0BvhFC9",
|
||||
"filament_id": "OFSOY4F3",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Pro 3 0.35mm nozzle",
|
||||
"FELIX Pro L 3.0 0.35mm nozzle",
|
||||
"FELIX Pro XL 3.0 0.35mm nozzle",
|
||||
"FELIX Tec 4 0.35mm nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"225.0"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"225.0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"40.0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"40.0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"40.0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"40.0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"40.0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"40.0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"40.0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"40.0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"28.0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"120"
|
||||
],
|
||||
"filament_retract_length": [
|
||||
"2.2"
|
||||
],
|
||||
"filament_retract_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.05"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.38"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
]
|
||||
}
|
||||
+81
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "FELIX FLEX Hardened Steel @ 0.50mm",
|
||||
"inherits": "fdm_filament_flex",
|
||||
"from": "system",
|
||||
"setting_id": "xgFrl1QpyQFFqBYz",
|
||||
"filament_id": "OFSOY4F3",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Pro 3 0.50mm nozzle",
|
||||
"FELIX Pro L 3.0 0.50mm nozzle",
|
||||
"FELIX Pro XL 3.0 0.50mm nozzle",
|
||||
"FELIX Tec 4 0.50mm nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"225.0"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"225.0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"40.0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"40.0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"40.0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"40.0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"40.0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"40.0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"40.0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"40.0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"28.0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"120"
|
||||
],
|
||||
"filament_retract_length": [
|
||||
"2.2"
|
||||
],
|
||||
"filament_retract_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.05"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.38"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
]
|
||||
}
|
||||
+81
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "FELIX FLEX Hardened Steel @ 0.70mm",
|
||||
"inherits": "fdm_filament_flex",
|
||||
"from": "system",
|
||||
"setting_id": "eZf8u1vzaQbsjyqO",
|
||||
"filament_id": "OFSOY4F3",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Pro 3 0.70mm nozzle",
|
||||
"FELIX Pro L 3.0 0.70mm nozzle",
|
||||
"FELIX Pro XL 3.0 0.70mm nozzle",
|
||||
"FELIX Tec 4 0.70mm nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"225.0"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"225.0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"40.0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"40.0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"40.0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"40.0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"40.0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"40.0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"40.0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"40.0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"28.0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"120"
|
||||
],
|
||||
"filament_retract_length": [
|
||||
"2.2"
|
||||
],
|
||||
"filament_retract_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.05"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.38"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
]
|
||||
}
|
||||
+81
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "FELIX PETG Brass @ 0.35mm",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"from": "system",
|
||||
"setting_id": "KZzk6aIxMvt1JlOR",
|
||||
"filament_id": "OF17qLwN",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Pro 3 0.35mm nozzle",
|
||||
"FELIX Pro L 3.0 0.35mm nozzle",
|
||||
"FELIX Pro XL 3.0 0.35mm nozzle",
|
||||
"FELIX Tec 4 0.35mm nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220.0"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220.0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"75.0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"75.0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"75.0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"75.0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"75.0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"75.0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"75.0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"75.0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"28.0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"120"
|
||||
],
|
||||
"filament_retract_length": [
|
||||
"1.2"
|
||||
],
|
||||
"filament_retract_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.05"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.27"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
]
|
||||
}
|
||||
+81
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "FELIX PETG Brass @ 0.50mm",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"from": "system",
|
||||
"setting_id": "RWPOGeCx1EEYeV8R",
|
||||
"filament_id": "OF17qLwN",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Pro 3 0.50mm nozzle",
|
||||
"FELIX Pro L 3.0 0.50mm nozzle",
|
||||
"FELIX Pro XL 3.0 0.50mm nozzle",
|
||||
"FELIX Tec 4 0.50mm nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220.0"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220.0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"75.0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"75.0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"75.0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"75.0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"75.0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"75.0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"75.0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"75.0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"28.0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"120"
|
||||
],
|
||||
"filament_retract_length": [
|
||||
"1.2"
|
||||
],
|
||||
"filament_retract_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.05"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.27"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
]
|
||||
}
|
||||
+81
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "FELIX PETG Hardened Steel @ 0.25mm",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"from": "system",
|
||||
"setting_id": "5RK6gGxFKyADXi4x",
|
||||
"filament_id": "OFQo5ZHk",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Pro 3 0.25mm nozzle",
|
||||
"FELIX Pro L 3.0 0.25mm nozzle",
|
||||
"FELIX Pro XL 3.0 0.25mm nozzle",
|
||||
"FELIX Tec 4 0.25mm nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"235.0"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"235.0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"75.0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"75.0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"75.0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"75.0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"75.0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"75.0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"75.0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"75.0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"28.0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"120"
|
||||
],
|
||||
"filament_retract_length": [
|
||||
"1.2"
|
||||
],
|
||||
"filament_retract_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.05"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.27"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
]
|
||||
}
|
||||
+81
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "FELIX PETG Hardened Steel @ 0.35mm",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"from": "system",
|
||||
"setting_id": "rz08j2cn8mlnvAxh",
|
||||
"filament_id": "OFQo5ZHk",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Pro 3 0.35mm nozzle",
|
||||
"FELIX Pro L 3.0 0.35mm nozzle",
|
||||
"FELIX Pro XL 3.0 0.35mm nozzle",
|
||||
"FELIX Tec 4 0.35mm nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"235.0"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"235.0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"75.0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"75.0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"75.0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"75.0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"75.0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"75.0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"75.0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"75.0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"28.0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"120"
|
||||
],
|
||||
"filament_retract_length": [
|
||||
"1.2"
|
||||
],
|
||||
"filament_retract_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.05"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.27"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
]
|
||||
}
|
||||
+81
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "FELIX PETG Hardened Steel @ 0.50mm",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"from": "system",
|
||||
"setting_id": "1xOwhrqAqJVO48d0",
|
||||
"filament_id": "OFQo5ZHk",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Pro 3 0.50mm nozzle",
|
||||
"FELIX Pro L 3.0 0.50mm nozzle",
|
||||
"FELIX Pro XL 3.0 0.50mm nozzle",
|
||||
"FELIX Tec 4 0.50mm nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"235.0"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"235.0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"75.0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"75.0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"75.0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"75.0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"75.0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"75.0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"75.0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"75.0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"28.0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"120"
|
||||
],
|
||||
"filament_retract_length": [
|
||||
"1.2"
|
||||
],
|
||||
"filament_retract_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.05"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.27"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
]
|
||||
}
|
||||
+81
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "FELIX PETG Hardened Steel @ 0.70mm",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"from": "system",
|
||||
"setting_id": "I2QXz0yDQN6ULNeF",
|
||||
"filament_id": "OFQo5ZHk",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Pro 3 0.70mm nozzle",
|
||||
"FELIX Pro L 3.0 0.70mm nozzle",
|
||||
"FELIX Pro XL 3.0 0.70mm nozzle",
|
||||
"FELIX Tec 4 0.70mm nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"235.0"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"235.0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"75.0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"75.0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"75.0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"75.0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"75.0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"75.0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"75.0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"75.0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"28.0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"120"
|
||||
],
|
||||
"filament_retract_length": [
|
||||
"1.2"
|
||||
],
|
||||
"filament_retract_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.05"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.27"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
]
|
||||
}
|
||||
+81
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "FELIX Premium PLA Brass @ 0.35mm",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "6Ax3SY7RI04PcFFJ",
|
||||
"filament_id": "OF8sLgrm",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Pro 3 0.35mm nozzle",
|
||||
"FELIX Pro L 3.0 0.35mm nozzle",
|
||||
"FELIX Pro XL 3.0 0.35mm nozzle",
|
||||
"FELIX Tec 4 0.35mm nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"190.0"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"190.0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"28.0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"120"
|
||||
],
|
||||
"filament_retract_length": [
|
||||
"1.4"
|
||||
],
|
||||
"filament_retract_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.05"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100.0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.22"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
]
|
||||
}
|
||||
+81
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "FELIX Premium PLA Brass @ 0.50mm",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "TzRWTEZl14IWlhrc",
|
||||
"filament_id": "OF8sLgrm",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Pro 3 0.50mm nozzle",
|
||||
"FELIX Pro L 3.0 0.50mm nozzle",
|
||||
"FELIX Pro XL 3.0 0.50mm nozzle",
|
||||
"FELIX Tec 4 0.50mm nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"190.0"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"190.0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"28.0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"120"
|
||||
],
|
||||
"filament_retract_length": [
|
||||
"1.4"
|
||||
],
|
||||
"filament_retract_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.05"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100.0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.22"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
]
|
||||
}
|
||||
+81
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "FELIX Premium PLA Hardened Steel @ 0.25mm",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "RtjX1Noxcsnv5cHv",
|
||||
"filament_id": "OFi00jWL",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Pro 3 0.25mm nozzle",
|
||||
"FELIX Pro L 3.0 0.25mm nozzle",
|
||||
"FELIX Pro XL 3.0 0.25mm nozzle",
|
||||
"FELIX Tec 4 0.25mm nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"205.0"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"205.0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"28.0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"120"
|
||||
],
|
||||
"filament_retract_length": [
|
||||
"1.4"
|
||||
],
|
||||
"filament_retract_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.05"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100.0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.22"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
]
|
||||
}
|
||||
+81
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "FELIX Premium PLA Hardened Steel @ 0.35mm",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "aQI8mIoLrX3liAlM",
|
||||
"filament_id": "OFi00jWL",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Pro 3 0.35mm nozzle",
|
||||
"FELIX Pro L 3.0 0.35mm nozzle",
|
||||
"FELIX Pro XL 3.0 0.35mm nozzle",
|
||||
"FELIX Tec 4 0.35mm nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"205.0"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"205.0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"28.0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"120"
|
||||
],
|
||||
"filament_retract_length": [
|
||||
"1.4"
|
||||
],
|
||||
"filament_retract_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.05"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100.0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.22"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
]
|
||||
}
|
||||
+81
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "FELIX Premium PLA Hardened Steel @ 0.50mm",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "pdnfmqbhfYXV8MAj",
|
||||
"filament_id": "OFi00jWL",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Pro 3 0.50mm nozzle",
|
||||
"FELIX Pro L 3.0 0.50mm nozzle",
|
||||
"FELIX Pro XL 3.0 0.50mm nozzle",
|
||||
"FELIX Tec 4 0.50mm nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"205.0"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"205.0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"28.0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"120"
|
||||
],
|
||||
"filament_retract_length": [
|
||||
"1.4"
|
||||
],
|
||||
"filament_retract_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.05"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100.0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.22"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
]
|
||||
}
|
||||
+81
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "FELIX Premium PLA Hardened Steel @ 0.70mm",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "BDxehnk3kKVRlysR",
|
||||
"filament_id": "OFi00jWL",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Pro 3 0.70mm nozzle",
|
||||
"FELIX Pro L 3.0 0.70mm nozzle",
|
||||
"FELIX Pro XL 3.0 0.70mm nozzle",
|
||||
"FELIX Tec 4 0.70mm nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"205.0"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"205.0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"28.0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"120"
|
||||
],
|
||||
"filament_retract_length": [
|
||||
"1.4"
|
||||
],
|
||||
"filament_retract_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.05"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100.0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.22"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
]
|
||||
}
|
||||
+81
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "FELIX Wood Brass @ 0.35mm",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "nRikN9oc1mOeA6dO",
|
||||
"filament_id": "OF7CzDzq",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Pro 3 0.35mm nozzle",
|
||||
"FELIX Pro L 3.0 0.35mm nozzle",
|
||||
"FELIX Pro XL 3.0 0.35mm nozzle",
|
||||
"FELIX Tec 4 0.35mm nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"185.0"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"185.0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"28.0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"120"
|
||||
],
|
||||
"filament_retract_length": [
|
||||
"2.5"
|
||||
],
|
||||
"filament_retract_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.15"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100.0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
]
|
||||
}
|
||||
+81
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "FELIX Wood Brass @ 0.50mm",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "SF4eGuHqUCtfEAGy",
|
||||
"filament_id": "OFKwdz3w",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Pro 3 0.50mm nozzle",
|
||||
"FELIX Pro L 3.0 0.50mm nozzle",
|
||||
"FELIX Pro XL 3.0 0.50mm nozzle",
|
||||
"FELIX Tec 4 0.50mm nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"185.0"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"185.0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"28.0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"120"
|
||||
],
|
||||
"filament_retract_length": [
|
||||
"2.5"
|
||||
],
|
||||
"filament_retract_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.15"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100.0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
]
|
||||
}
|
||||
+81
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "FELIX Wood Hardened Steel @ 0.25mm",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "AkZV2IjFVNLytIaY",
|
||||
"filament_id": "OFsMMDMp",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Pro 3 0.25mm nozzle",
|
||||
"FELIX Pro L 3.0 0.25mm nozzle",
|
||||
"FELIX Pro XL 3.0 0.25mm nozzle",
|
||||
"FELIX Tec 4 0.25mm nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"200.0"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"200.0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"28.0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"120"
|
||||
],
|
||||
"filament_retract_length": [
|
||||
"2.5"
|
||||
],
|
||||
"filament_retract_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.15"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100.0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
]
|
||||
}
|
||||
+81
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "FELIX Wood Hardened Steel @ 0.35mm",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "MEGMFP2nv59vZSpf",
|
||||
"filament_id": "OFsMMDMp",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Pro 3 0.35mm nozzle",
|
||||
"FELIX Pro L 3.0 0.35mm nozzle",
|
||||
"FELIX Pro XL 3.0 0.35mm nozzle",
|
||||
"FELIX Tec 4 0.35mm nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"200.0"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"200.0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"28.0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"120"
|
||||
],
|
||||
"filament_retract_length": [
|
||||
"2.5"
|
||||
],
|
||||
"filament_retract_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.15"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100.0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
]
|
||||
}
|
||||
+81
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "FELIX Wood Hardened Steel @ 0.50mm",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "ObSufa3ZQ8tUmJUB",
|
||||
"filament_id": "OFsMMDMp",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Pro 3 0.50mm nozzle",
|
||||
"FELIX Pro L 3.0 0.50mm nozzle",
|
||||
"FELIX Pro XL 3.0 0.50mm nozzle",
|
||||
"FELIX Tec 4 0.50mm nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"200.0"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"200.0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"28.0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"120"
|
||||
],
|
||||
"filament_retract_length": [
|
||||
"2.5"
|
||||
],
|
||||
"filament_retract_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.15"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100.0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
]
|
||||
}
|
||||
+81
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "FELIX Wood Hardened Steel @ 0.70mm",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "LCRYcNn6HN4lviM2",
|
||||
"filament_id": "OFsMMDMp",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Pro 3 0.70mm nozzle",
|
||||
"FELIX Pro L 3.0 0.70mm nozzle",
|
||||
"FELIX Pro XL 3.0 0.70mm nozzle",
|
||||
"FELIX Tec 4 0.70mm nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"200.0"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"200.0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"28.0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"120"
|
||||
],
|
||||
"filament_retract_length": [
|
||||
"2.5"
|
||||
],
|
||||
"filament_retract_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"60.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.15"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100.0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FELIX Printers"
|
||||
]
|
||||
}
|
||||
+81
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "FORMFUTURA AppoloX ASA Brass @ 0.35mm",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"setting_id": "gRmosSxV2WFOgLAa",
|
||||
"filament_id": "OFEUX7D3",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Pro 3 0.35mm nozzle",
|
||||
"FELIX Pro L 3.0 0.35mm nozzle",
|
||||
"FELIX Pro XL 3.0 0.35mm nozzle",
|
||||
"FELIX Tec 4 0.35mm nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"235.0"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"235.0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"90.0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"90.0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"90.0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"90.0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"90.0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"90.0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"90.0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"90.0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"28.0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"140"
|
||||
],
|
||||
"filament_retract_length": [
|
||||
"1.4"
|
||||
],
|
||||
"filament_retract_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.96"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"40.0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"40.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.07"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FORMFUTURA"
|
||||
]
|
||||
}
|
||||
+81
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "FORMFUTURA AppoloX ASA Brass @ 0.50mm",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"setting_id": "iXdebkq6x0RsCLSh",
|
||||
"filament_id": "OFEUX7D3",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Pro 3 0.50mm nozzle",
|
||||
"FELIX Pro L 3.0 0.50mm nozzle",
|
||||
"FELIX Pro XL 3.0 0.50mm nozzle",
|
||||
"FELIX Tec 4 0.50mm nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"235.0"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"235.0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"90.0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"90.0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"90.0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"90.0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"90.0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"90.0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"90.0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"90.0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"28.0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"140"
|
||||
],
|
||||
"filament_retract_length": [
|
||||
"1.4"
|
||||
],
|
||||
"filament_retract_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.96"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"40.0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"40.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.07"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FORMFUTURA"
|
||||
]
|
||||
}
|
||||
+81
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "FORMFUTURA AppoloX ASA Hardened Steel @ 0.25mm",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"setting_id": "vDwvCcVTrlXsApST",
|
||||
"filament_id": "OFguQdOr",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Pro 3 0.25mm nozzle",
|
||||
"FELIX Pro L 3.0 0.25mm nozzle",
|
||||
"FELIX Pro XL 3.0 0.25mm nozzle",
|
||||
"FELIX Tec 4 0.25mm nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"245.0"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"245.0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"90.0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"90.0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"90.0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"90.0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"90.0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"90.0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"90.0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"90.0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"28.0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"140"
|
||||
],
|
||||
"filament_retract_length": [
|
||||
"1.4"
|
||||
],
|
||||
"filament_retract_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.96"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"40.0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"40.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.07"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FORMFUTURA"
|
||||
]
|
||||
}
|
||||
+81
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "FORMFUTURA AppoloX ASA Hardened Steel @ 0.35mm",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"setting_id": "WdP7DnbgAI8O4JOR",
|
||||
"filament_id": "OFguQdOr",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Pro 3 0.35mm nozzle",
|
||||
"FELIX Pro L 3.0 0.35mm nozzle",
|
||||
"FELIX Pro XL 3.0 0.35mm nozzle",
|
||||
"FELIX Tec 4 0.35mm nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"245.0"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"245.0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"90.0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"90.0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"90.0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"90.0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"90.0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"90.0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"90.0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"90.0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"28.0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"140"
|
||||
],
|
||||
"filament_retract_length": [
|
||||
"1.4"
|
||||
],
|
||||
"filament_retract_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.96"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"40.0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"40.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.07"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FORMFUTURA"
|
||||
]
|
||||
}
|
||||
+81
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "FORMFUTURA AppoloX ASA Hardened Steel @ 0.50mm",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"setting_id": "wwPIQoP8z2kiDq6c",
|
||||
"filament_id": "OFguQdOr",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Pro 3 0.50mm nozzle",
|
||||
"FELIX Pro L 3.0 0.50mm nozzle",
|
||||
"FELIX Pro XL 3.0 0.50mm nozzle",
|
||||
"FELIX Tec 4 0.50mm nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"245.0"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"245.0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"90.0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"90.0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"90.0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"90.0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"90.0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"90.0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"90.0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"90.0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"28.0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"140"
|
||||
],
|
||||
"filament_retract_length": [
|
||||
"1.4"
|
||||
],
|
||||
"filament_retract_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.96"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"40.0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"40.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.07"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FORMFUTURA"
|
||||
]
|
||||
}
|
||||
+81
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "FORMFUTURA AppoloX ASA Hardened Steel @ 0.70mm",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"setting_id": "pc50UjGaC3hGbzLo",
|
||||
"filament_id": "OFguQdOr",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Pro 3 0.70mm nozzle",
|
||||
"FELIX Pro L 3.0 0.70mm nozzle",
|
||||
"FELIX Pro XL 3.0 0.70mm nozzle",
|
||||
"FELIX Tec 4 0.70mm nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"245.0"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"245.0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"90.0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"90.0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"90.0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"90.0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"90.0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"90.0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"90.0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"90.0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"28.0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"140"
|
||||
],
|
||||
"filament_retract_length": [
|
||||
"1.4"
|
||||
],
|
||||
"filament_retract_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"50.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"40.0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"40.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.07"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FORMFUTURA"
|
||||
]
|
||||
}
|
||||
+81
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "FORMFUTURA Aquasolve PVA Brass @ 0.35mm",
|
||||
"inherits": "fdm_filament_pva",
|
||||
"from": "system",
|
||||
"setting_id": "BJplNxEdFo9WucQi",
|
||||
"filament_id": "OFumEwBr",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"FELIX Pro 3 0.35mm nozzle",
|
||||
"FELIX Pro L 3.0 0.35mm nozzle",
|
||||
"FELIX Pro XL 3.0 0.35mm nozzle",
|
||||
"FELIX Tec 4 0.35mm nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"195.0"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"195.0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"55.0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"55.0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"28.0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"120"
|
||||
],
|
||||
"filament_retract_length": [
|
||||
"2.5"
|
||||
],
|
||||
"filament_retract_speed": [
|
||||
"55.0"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"55.0"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0.2"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"40.0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"40.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.23"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"FORMFUTURA"
|
||||
]
|
||||
}
|
||||
Some files were not shown because too many files have changed in this diff Show More
Reference in New Issue
Block a user