Flatpak: drop the WebKit NVIDIA export; the binary owns the workaround

/proc/driver/nvidia/version is readable inside the Flatpak sandbox, so the binary's NVIDIA branch already sets WEBKIT_DMABUF_RENDERER_FORCE_SHM with the correct runtime gate and the entrypoint's own export is redundant. Verified with: flatpak run --command=cat com.orcaslicer.OrcaSlicer /proc/driver/nvidia/version which prints the NVRM version (driver 615.71.09) from inside the sandbox.
Flatpak: force WebKit's shared-memory transport instead of disabling DMABUF
2026-10-12 18:31:18 +00:00 · 2026-10-12 15:49:58 +08:00 · 2026-10-12 15:06:30 +08:00 · 2026-10-12 13:07:02 +08:00 · 2026-10-12 13:02:10 +08:00 · 2026-10-12 11:46:31 +08:00
26 changed files with 197 additions and 929 deletions
@@ -569,12 +569,16 @@ on the **first** call. So:
 #endif
 ```

-**Before GTK starts**, only the environment exists. `CLI::run` (`src/OrcaSlicer.cpp`) branches on
-`GDK_BACKEND` (an `x11` prefix means the X11 opt-in). On the default path it forces `GDK_BACKEND=x11`
-when wx lacks EGL and `WAYLAND_DISPLAY` is set. It sets `WEBKIT_DISABLE_COMPOSITING_MODE=1`
-(non-replacing) only when both `DISPLAY` and `WAYLAND_DISPLAY` are set, and calls `XInitThreads()`
+**Before GTK starts**, only the environment exists. `CLI::run` (`src/OrcaSlicer.cpp`) sets the NVIDIA
+DMABUF workaround and then branches on `GDK_BACKEND` (an `x11` prefix means the X11 opt-in). On both
+paths, when `/proc/driver/nvidia/version` exists and the linked WebKitGTK honours the switch (>= 2.44,
+`WebView::SupportsForceSharedMemory()`), it sets `WEBKIT_DMABUF_RENDERER_FORCE_SHM=1` and
+`WEBKIT_FORCE_DMABUF_RENDERER=1` (non-replacing): the proprietary driver cannot back WebKit's hardware
+DMABUF renderer. On the default path it forces `GDK_BACKEND=x11` when wx lacks EGL and `WAYLAND_DISPLAY`
+is set. It sets `WEBKIT_DISABLE_COMPOSITING_MODE=1` (non-replacing) only when both `DISPLAY` and
+`WAYLAND_DISPLAY` are set and the linked WebKitGTK is older than 2.42, and calls `XInitThreads()`
 only when `DISPLAY` is set. With neither variable set, the GUI refuses to start ("Neither DISPLAY nor
-WAYLAND_DISPLAY set"). The details and the WebKit rule (c12912e0df) are in
+WAYLAND_DISPLAY set"). The details and the WebKit rules (c12912e0df) are in
 `references/webview-gl-aui-media.md` §WebKitGTK on Linux sessions.

 **wx's own detectors**, for reference:
@@ -61,7 +61,8 @@ available; GTK2/WebKit1 is an opt-out configuration the GUI does not support.
 11. A web host that re-themes in place handles `EVT_WEBVIEW_RECREATED` without `Skip()`; one that
    needs a reload lets it through. §[Orca wrapper](#orca-webview-wrapper-widgetswebview)
 12. Keep `WebViewWebKit`'s destructor removing the `"wx"` handler. §[Orca wrapper](#orca-webview-wrapper-widgetswebview)
-13. Do not widen `WEBKIT_DISABLE_COMPOSITING_MODE` beyond Orca's default-path XWayland case, and never
+13. Do not widen `WEBKIT_DISABLE_COMPOSITING_MODE` beyond Orca's default-path XWayland case for
+    WebKitGTK older than 2.42, and never
    make a page's progress depend only on a C++→JS callback. §[WebKitGTK on Linux](#webkitgtk-on-linux-sessions)
 14. GL attribute lists: legacy `int[]` lists end with `0` and spell out `WX_GL_RGBA` and
    `WX_GL_DOUBLEBUFFER`; `wxGLAttributes`/`wxGLContextAttrs` end with `EndList()`; MSAA is requested
@@ -567,33 +568,66 @@ vue-resize workaround script and sets a persistent SQLite cookie store on the vi
 ## WebKitGTK on Linux sessions

 **Mechanism.** `CLI::run` (`src/OrcaSlicer.cpp`, under `#ifdef __WXGTK__`, before GTK initialises)
-branches on `GDK_BACKEND`:
+sets the NVIDIA DMABUF workaround and then branches on `GDK_BACKEND`:
+- **Both paths**, before the split: when `/proc/driver/nvidia/version` exists and the linked WebKitGTK
+  honours the switch (>= 2.44, `WebView::SupportsForceSharedMemory()`), it sets
+  `WEBKIT_DMABUF_RENDERER_FORCE_SHM=1` and `WEBKIT_FORCE_DMABUF_RENDERER=1` non-replacing. The
+  proprietary driver cannot back WebKit's hardware DMABUF renderer, so the shared-memory transport keeps
+  accelerated compositing instead of dropping it; `WEBKIT_FORCE_DMABUF_RENDERER` clears the
+  Debian/Ubuntu/openSUSE `isNVIDIA()` early return, which otherwise returns before the FORCE_SHM check.
 - **Default path** (`GDK_BACKEND` unset or not starting with `x11`): if wx lacks EGL (`!wxHAS_EGL`) and
  `WAYLAND_DISPLAY` is set, it forces `GDK_BACKEND=x11`; it sets `WEBKIT_DISABLE_COMPOSITING_MODE=1`
-  non-replacing **only** when both `DISPLAY` and `WAYLAND_DISPLAY` are non-empty (a Wayland session with
+  non-replacing **only** when the linked WebKitGTK predates 2.42 (`WebView::NeedsCompositingWorkaround()`)
+  **and** both `DISPLAY` and `WAYLAND_DISPLAY` are non-empty (a Wayland session with
  XWayland available — the session, not the backend GTK will pick); `XInitThreads()` runs only when
  `DISPLAY` is set.
 - **`GDK_BACKEND=x11…` opt-in path**: sets `DRI_PRIME=1` (and the NVIDIA PRIME variables when
  `/proc/driver/nvidia/version` exists), calls `XInitThreads()`, and deliberately does **not** disable
-  compositing (the comment: the WebKit2GTK XWayland bug appears fixed in WebKit2GTK ≥ 2.42, and leaving
-  compositing on keeps hardware acceleration for Device / Setup Wizard / login pages).
+  compositing, which keeps hardware acceleration for Device / Setup Wizard / login pages.

 Runtime backend detection elsewhere uses Orca's `is_running_on_wayland()` / `is_running_on_x11()`
 (see `references/platforms.md`), not these environment variables.

 **Pitfall.**
+- **Rule:** On NVIDIA reach for `WEBKIT_DMABUF_RENDERER_FORCE_SHM` before
+  `WEBKIT_DISABLE_COMPOSITING_MODE`. **Why:** the proprietary driver cannot back WebKit's hardware
+  DMABUF renderer, leaving web views blank or slow; FORCE_SHM keeps accelerated compositing and only
+  skips the hardware path, while disabling compositing drops it. Threaded scrolling is a separate,
+  release-dependent default (off in 2.44/2.45, on from 2.46). `WEBKIT_DISABLE_DMABUF_RENDERER` is not a
+  substitute — it is read first, leaves the transport set empty (no compositing from 2.44 on, where the
+  X11/Wayland fallback renderers were removed) and has a reported crash path. On Debian/Ubuntu and
+  openSUSE the `isNVIDIA()` patch returns before the FORCE_SHM check, so `WEBKIT_FORCE_DMABUF_RENDERER=1`
+  must clear it first; that variable exists only in those patches. WebKit reads all of these once per
+  process, before the first WebView.
+  The test is `/proc/driver/nvidia/version`, so a hybrid laptop that renders on its iGPU also takes the
+  shared-memory path, which is a per-frame GPU readback rather than zero-copy; exporting
+  `WEBKIT_DMABUF_RENDERER_FORCE_SHM=0` in the environment restores the hardware path.
+  ```cpp
+  // Wrong: kills compositing and threaded scrolling (and can crash on modern WebKit)
+  ::setenv("WEBKIT_DISABLE_DMABUF_RENDERER", "1", false);
+  // Right: keep compositing, skip only the hardware DMABUF path
+  if (::access("/proc/driver/nvidia/version", F_OK) == 0 && WebView::SupportsForceSharedMemory()) {
+      ::setenv("WEBKIT_DMABUF_RENDERER_FORCE_SHM", "1", /*replace*/ false);
+      ::setenv("WEBKIT_FORCE_DMABUF_RENDERER", "1", /*replace*/ false);
+  }
+  ```
+  Cite: WebKit 2.52.6 `Source/WebKit/UIProcess/gtk/AcceleratedBackingStore.cpp`
+  (`rendererBufferTransportMode()`), Debian `disable-nvidia-dmabuf.patch`, WebKit bug 262607.
 - **Rule:** Set `WEBKIT_DISABLE_COMPOSITING_MODE` only on the default path in Wayland sessions,
  non-replacing (`setenv(..., false)`, so a value the user already exported wins), before GTK
-  initialises; never unconditionally. Keep JS-side fallbacks so a page never
+  initialises; never unconditionally, and only for the WebKitGTK releases that need it (older than
+  2.42, `WebView::NeedsCompositingWorkaround()`). Keep JS-side fallbacks so a page never
  waits forever for a C++→JS call.
-  **Why:** WebKit2GTK accelerated compositing could fail silently under XWayland, leaving web views
-  blank (Setup Wizard stuck on "Loading..."); disabling it everywhere needlessly drops hardware
-  acceleration; without the JS timeout the user is stuck when the signal is lost.
+  **Why:** WebKit2GTK accelerated compositing could fail silently under XWayland before 2.42, leaving
+  web views blank (Setup Wizard stuck on "Loading..."); the variable also turns off threaded scrolling,
+  so applying it on a newer WebKit needlessly drops both GPU compositing and async scrolling (the
+  Device tab loses its smoothness); without the JS timeout the user is stuck when the signal is lost.
  ```cpp
  // Wrong: unconditional, kills HW acceleration everywhere
  ::setenv("WEBKIT_DISABLE_COMPOSITING_MODE", "1", false);
-  // Right (default path only): non-replacing, before GTK init, Wayland session with XWayland
-  if (display && *display && wayland && *wayland)
+  // Right (default path only): non-replacing, before GTK init, WebKitGTK < 2.42,
+  // Wayland session with XWayland
+  if (WebView::NeedsCompositingWorkaround() && display && *display && wayland && *wayland)
      ::setenv("WEBKIT_DISABLE_COMPOSITING_MODE", "1", /*replace*/ false);
  ```
  Cite: c12912e0df (`src/OrcaSlicer.cpp`; `resources/web/guide/0/load.js` `OnInit`
@@ -1,65 +0,0 @@
-name: clang-tidy fix
-
-# Makes the missing-include fix that /bot fix-tidy (pr-tidy-bot.yml) posts on a
-# pull request: scripts/run_clang_tidy.sh --fix on the merge commit the
-# clang-tidy check runs on, uploaded as the clang-tidy-fix artifact.
-#
-# Every push to a PR starts this workflow, and its job skips on that first
-# attempt. The bot re-runs it on request. A re-run keeps the pull_request
-# context, so the PR's code runs with a read-only token, no secrets and the
-# PR's own cache, never main's, whoever asked for it.
-on:
-  pull_request:
-    branches:
-      - main
-      - release/*
-
-permissions:
-  contents: read
-
-jobs:
-  fix:
-    if: github.run_attempt > 1
-    # A hosted runner, so nothing the PR's code leaves behind outlives the job.
-    runs-on: ubuntu-24.04
-    timeout-minutes: 60
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v7
-        with:
-          lfs: 'false'
-          # The PR merge commit plus its first parent, the base it is diffed against.
-          fetch-depth: 2
-          persist-credentials: false
-
-      # Parsing needs the dependency headers, not a build of this PR's deps/, so
-      # a PR that changes deps/ falls back to the newest cache main has.
-      - name: Restore cached deps
-        uses: actions/cache/restore@v6
-        with:
-          path: ${{ github.workspace }}/deps/build/OrcaSlicer_dep
-          key: linux-clang-cache-orcaslicer_deps-build-${{ hashFiles('deps/**') }}
-          restore-keys: linux-clang-cache-orcaslicer_deps-build-
-          fail-on-cache-miss: true
-
-      - name: Apt-Install Dependencies
-        uses: ./.github/actions/apt-install-deps
-
-      # The status says whether findings remain that --fix cannot fix.
-      - name: Fix the changed lines
-        run: |
-          mkdir -p "$RUNNER_TEMP/clang-tidy-fix"
-          status=0
-          scripts/run_clang_tidy.sh --base HEAD^1 --yes --fix || status=$?
-          echo "$status" > "$RUNNER_TEMP/clang-tidy-fix/status"
-          git -c core.quotePath=false diff --no-color --no-ext-diff --src-prefix=a/ --dst-prefix=b/ \
-            > "$RUNNER_TEMP/clang-tidy-fix/fix.patch"
-
-      - name: Upload the fix
-        uses: actions/upload-artifact@v7
-        with:
-          name: clang-tidy-fix
-          path: ${{ runner.temp }}/clang-tidy-fix/
-          retention-days: 7
-          # A later re-run of the same run replaces the earlier fix.
-          overwrite: true
@@ -1,476 +0,0 @@
-name: PR clang-tidy Bot
-
-# Helps a pull request past the clang-tidy check.
-#
-# When the check fails on a PR's changes, a comment asks the author to fix it,
-# either with scripts/run_clang_tidy.sh --fix or by commenting:
-#   /bot fix-tidy
-#
-# That command, from the PR's author or an account with write access, re-runs
-# the PR's clang-tidy fix run (clang_tidy_fix.yml), which makes the fix in the
-# PR's own context. When it finishes, the fix is posted as one review: each
-# include whose place falls on a line the PR's diff shows is a suggestion GitHub
-# can commit in one click, and the review's body holds the whole patch with a
-# git apply command. Findings --fix cannot fix, such as a using in a header,
-# are left for the check to report.
-#
-# No code from the PR runs here. Nothing is pushed, and the patch is only
-# posted when every line it adds is an #include in a C++ file the PR changes.
-#
-# workflow_run matches the workflows by their name: keep "clang-tidy" and
-# "clang-tidy fix" in step with clang_tidy.yml and clang_tidy_fix.yml, and
-# TIDY_STEP below with the clang-tidy step's name in clang_tidy.yml.
-
-on:
-  issue_comment:
-    types:
-      - created
-  workflow_run:
-    workflows:
-      - clang-tidy
-      - clang-tidy fix
-    types:
-      - completed
-
-permissions: {}
-
-jobs:
-  request:
-    # Skips the job unless a PR comment mentions the command.
-    if: >-
-      github.repository == 'OrcaSlicer/OrcaSlicer'
-      && github.event_name == 'issue_comment'
-      && github.event.issue.pull_request != null
-      && contains(github.event.comment.body, '/bot fix-tidy')
-    permissions:
-      actions: write         # re-run the fix run
-      pull-requests: write   # react to and answer the comment, which is the PR's
-      issues: write          # feedback comment + reactions
-    runs-on: ubuntu-latest
-    timeout-minutes: 5
-    steps:
-      - name: Re-run the PR's clang-tidy fix
-        uses: actions/github-script@v9
-        with:
-          script: |
-            const MARKER = '<!-- pr-tidy-bot -->';
-            const FIX_WORKFLOW = 'clang_tidy_fix.yml';
-
-            const { owner, repo } = context.repo;
-            const issue = context.payload.issue;
-            const comment = context.payload.comment;
-
-            // Ignores a comment whose sender is not its author.
-            if (context.payload.sender.login !== comment.user.login || comment.user.type !== 'User') {
-              core.info('Ignoring a comment not written by its sender, or by a bot.');
-              return;
-            }
-
-            const commandLine = (comment.body || '')
-              .split('\n')
-              .map((line) => line.trim())
-              .find((line) => /^\/bot\s+fix-tidy\b/i.test(line));
-            if (!commandLine) {
-              core.info('No /bot fix-tidy command found.');
-              return;
-            }
-
-            const commenter = comment.user.login;
-            // Answers only the PR's author and maintainers, so the command cannot be used to spam.
-            if (commenter !== issue.user.login) {
-              const { data: access } = await github.rest.repos.getCollaboratorPermissionLevel({ owner, repo, username: commenter });
-              if (!['admin', 'write'].includes(access.permission)) {
-                core.info(`Ignoring /bot fix-tidy from @${commenter}: not the PR's author and no write access.`);
-                return;
-              }
-            }
-
-            const react = (content) =>
-              github.rest.reactions.createForIssueComment({ owner, repo, comment_id: comment.id, content });
-            async function refuse(reason) {
-              await react('-1');
-              await github.rest.issues.createComment({ owner, repo, issue_number: issue.number, body: `${MARKER}\n@${commenter} ${reason}` });
-            }
-
-            await react('eyes');
-
-            if (!/^\/bot\s+fix-tidy$/i.test(commandLine)) {
-              return refuse('`/bot fix-tidy` takes no arguments.');
-            }
-
-            const { data: pr } = await github.rest.pulls.get({ owner, repo, pull_number: issue.number });
-            if (pr.state !== 'open') {
-              return refuse('the PR is not open.');
-            }
-
-            const sha = pr.head.sha.slice(0, 10);
-            const { data: { workflow_runs: runs } } = await github.rest.actions.listWorkflowRuns({
-              owner, repo, workflow_id: FIX_WORKFLOW, event: 'pull_request', head_sha: pr.head.sha, per_page: 1
-            });
-            const run = runs[0];
-            // A PR last pushed before clang_tidy_fix.yml existed has no run to re-run.
-            if (!run) {
-              return refuse(`there is no clang-tidy fix run for ${sha}, the PR's latest commit. If you just pushed it, ` +
-                'try again in a minute. Otherwise, push a commit or merge the base branch to start one, then comment `/bot fix-tidy` again.');
-            }
-            if (run.status !== 'completed') {
-              // The first attempt is the one every push starts, and it makes no fix.
-              return refuse(run.run_attempt > 1
-                ? `a clang-tidy fix for ${sha} is already [running](${run.html_url}). I'll post it when it finishes.`
-                : `the PR's checks on ${sha} are still starting. Comment \`/bot fix-tidy\` again in a minute.`);
-            }
-            // GitHub refuses to re-run a run created over 30 days ago.
-            try {
-              await github.rest.actions.reRunWorkflow({ owner, repo, run_id: run.id });
-            } catch (error) {
-              core.warning(`Re-running ${run.html_url} failed: ${error.message}`);
-              return refuse(`GitHub won't re-run the [clang-tidy fix run](${run.html_url}) for ${sha} (${error.message}). ` +
-                'Push a commit or merge the base branch to start a new one, then comment `/bot fix-tidy` again.');
-            }
-            core.info(`Re-ran ${run.html_url}`);
-
-  suggest:
-    # The fix run's re-runs only. Its first attempt makes no fix.
-    if: >-
-      github.repository == 'OrcaSlicer/OrcaSlicer'
-      && github.event_name == 'workflow_run'
-      && github.event.workflow_run.name == 'clang-tidy fix'
-      && github.event.workflow_run.event == 'pull_request'
-      && github.event.workflow_run.run_attempt > 1
-    concurrency:
-      group: ${{ github.workflow }}-suggest-${{ github.event.workflow_run.head_repository.full_name }}-${{ github.event.workflow_run.head_branch }}
-      cancel-in-progress: false
-    permissions:
-      actions: read          # download the fix
-      contents: read         # check out the PR head
-      pull-requests: write   # the review
-      issues: write          # feedback comment + reactions
-    runs-on: ubuntu-latest
-    timeout-minutes: 10
-    steps:
-      - name: Find the PR and who asked
-        id: find
-        uses: actions/github-script@v9
-        with:
-          script: |
-            const MARKER = '<!-- pr-tidy-bot -->';
-            const CPP = /^(src|tests)\/.+\.(cpp|cc|cxx|hpp|h|hxx)$/;
-
-            const { owner, repo } = context.repo;
-            const run = context.payload.workflow_run;
-
-            // workflow_run lists no PR for a fork's branch, so the PR is found by its branch.
-            const { data: prs } = await github.rest.pulls.list({
-              owner, repo, state: 'open', head: `${run.head_repository.owner.login}:${run.head_branch}`
-            });
-            const pr = prs[0];
-            if (!pr) {
-              core.info('No open PR for this run.');
-              return;
-            }
-
-            // The latest /bot fix-tidy comment is the one this run answers.
-            const comments = await github.paginate(github.rest.issues.listComments, { owner, repo, issue_number: pr.number, per_page: 100 });
-            const request = comments.reverse().find((c) => c.user.type === 'User' && /^\s*\/bot\s+fix-tidy\s*$/im.test(c.body || ''));
-            const mention = request ? `@${request.user.login} ` : '';
-            async function refuse(reason) {
-              if (request) {
-                await github.rest.reactions.createForIssueComment({ owner, repo, comment_id: request.id, content: '-1' });
-              }
-              await github.rest.issues.createComment({ owner, repo, issue_number: pr.number, body: `${MARKER}\n${mention}${reason}` });
-            }
-
-            if (pr.head.sha !== run.head_sha) {
-              return refuse('the PR changed while I was making its clang-tidy fix. Comment `/bot fix-tidy` again.');
-            }
-            if (run.conclusion !== 'success') {
-              return refuse(`I couldn't make the clang-tidy fix. See the [run log](${run.html_url}).`);
-            }
-
-            // The right-side lines of each changed C++ file's diff: the lines a
-            // review comment can be placed on. A file too large for GitHub to
-            // show its diff has none, and gets no suggestions.
-            const files = await github.paginate(github.rest.pulls.listFiles, { owner, repo, pull_number: pr.number, per_page: 100 });
-            const ranges = {};
-            for (const file of files) {
-              if (file.status === 'removed' || !CPP.test(file.filename)) {
-                continue;
-              }
-              ranges[file.filename] = [...(file.patch || '').matchAll(/^@@ -\d+(?:,\d+)? \+(\d+)(?:,(\d+))? @@/gm)]
-                .map((m) => [Number(m[1]), Number(m[1]) + Number(m[2] ?? 1) - 1])
-                .filter(([first, last]) => last >= first);
-            }
-
-            core.setOutput('pr', pr.number);
-            core.setOutput('head-sha', pr.head.sha);
-            core.setOutput('head-repo', run.head_repository.full_name);
-            core.setOutput('ranges', JSON.stringify(ranges));
-            core.setOutput('mention', mention);
-            core.setOutput('request-id', request ? request.id : '');
-
-      - name: Download the fix
-        if: steps.find.outputs.pr != ''
-        uses: actions/download-artifact@v8
-        with:
-          name: clang-tidy-fix
-          run-id: ${{ github.event.workflow_run.id }}
-          github-token: ${{ github.token }}
-          path: ${{ runner.temp }}/clang-tidy-fix
-
-      # The PR's own files, only to apply the patch to. Nothing in them is run.
-      - name: Checkout the PR head
-        if: steps.find.outputs.pr != ''
-        uses: actions/checkout@v7
-        with:
-          repository: ${{ steps.find.outputs.head-repo }}
-          ref: ${{ steps.find.outputs.head-sha }}
-          path: head
-          fetch-depth: 1
-          lfs: 'false'
-          persist-credentials: false
-          sparse-checkout: |
-            src
-            tests
-
-      # The fix was made on the PR's merge commit, so it is applied to the head
-      # and diffed again, giving line numbers in the PR's own files.
-      - name: Check the fix and place its suggestions
-        id: place
-        if: steps.find.outputs.pr != ''
-        env:
-          RANGES: ${{ steps.find.outputs.ranges }}
-        run: |
-          python3 -I - "$RUNNER_TEMP/clang-tidy-fix/fix.patch" head "$RUNNER_TEMP" <<'EOF'
-          import json, os, re, subprocess, sys
-
-          patch_path, head, out = sys.argv[1:]
-          ranges = json.loads(os.environ["RANGES"])
-
-          def output(**values):
-              with open(os.environ["GITHUB_OUTPUT"], "a", encoding="utf-8") as f:
-                  for key, value in values.items():
-                      f.write(f"{key}={value}\n")
-
-          patch = open(patch_path, encoding="utf-8").read()
-          if not patch.strip():
-              output(result="empty")
-              sys.exit()
-
-          # Every line the patch adds must be an #include or blank, in a C++ file the
-          # PR changes, and it may not remove, create, rename or change the mode of
-          # anything.
-          include = re.compile(r'\s*#\s*include\s*(<[\w./+-]+>|"[\w./+-]+")\s*')
-          header = re.compile(r"(index [0-9a-f]+\.\.[0-9a-f]+( \d+)?|@@ -\d+(,\d+)? \+\d+(,\d+)? @@.*)")
-          problems = []
-          path = None
-          for line in patch.splitlines():
-              if line.startswith("diff --git "):
-                  match = re.fullmatch(r"diff --git a/(.+) b/\1", line)
-                  path = match.group(1) if match else None
-                  if path not in ranges:
-                      problems.append(f"{line}: not a C++ file the PR changes")
-              # git appends a tab to the --- and +++ lines of a path that contains a space.
-              elif line.removesuffix("\t") in (f"--- a/{path}", f"+++ b/{path}") or header.fullmatch(line):
-                  pass
-              elif line.startswith(" ") or line == "\\ No newline at end of file":
-                  pass
-              elif line.startswith("+") and (include.fullmatch(line[1:]) or not line[1:].strip()):
-                  pass
-              else:
-                  problems.append(f"{path}: {line}")
-          if problems:
-              for problem in problems:
-                  print(f"::error::Refused patch line {problem}")
-              output(result="rejected")
-              sys.exit()
-
-          if subprocess.run(["git", "-C", head, "apply", "--index", os.path.abspath(patch_path)]).returncode != 0:
-              output(result="apply-failed")
-              sys.exit()
-
-          git = ["git", "-C", head, "-c", "core.quotePath=false", "diff", "--cached", "--no-color", "--no-ext-diff",
-                 "--src-prefix=a/", "--dst-prefix=b/"]
-          with open(os.path.join(out, "head.patch"), "w", encoding="utf-8") as f:
-              f.write(subprocess.run(git, check=True, capture_output=True, encoding="utf-8").stdout)
-
-          # Each run of added lines becomes one suggestion on the line it goes after
-          # (before, at the top of a file): that line, replaced by itself and the
-          # includes. It can only sit on a line the PR's diff shows.
-          hunks = []
-          path = None
-          for line in subprocess.run(git + ["-U0"], check=True, capture_output=True, encoding="utf-8").stdout.splitlines():
-              if line.startswith("diff --git "):
-                  path = re.fullmatch(r"diff --git a/(.+) b/\1", line).group(1)
-              elif line.startswith("@@ "):
-                  hunks.append((path, int(re.match(r"@@ -(\d+)", line).group(1)), []))
-              elif hunks and line.startswith("+") and not line.startswith("+++ "):
-                  hunks[-1][2].append(line[1:])
-
-          suggestions = []
-          total = suggested = 0
-          for path, after, added in hunks:
-              count = sum(bool(include.fullmatch(line)) for line in added)
-              total += count
-              original = subprocess.run(["git", "-C", head, "show", f"HEAD:{path}"], check=True, capture_output=True,
-                                        encoding="utf-8").stdout.splitlines()
-              line = max(after, 1)
-              if line > len(original) or not any(first <= line <= last for first, last in ranges[path]):
-                  continue
-              body = "\n".join([original[line - 1], *added] if after else [*added, original[0]])
-              # A fence longer than any run of backticks in the line it repeats.
-              fence = "`" * max([3] + [len(run) + 1 for run in re.findall(r"`+", body)])
-              suggestions.append({"path": path, "line": line, "side": "RIGHT",
-                                  "body": f"{fence}suggestion\n{body}\n{fence}"})
-              suggested += count
-          with open(os.path.join(out, "suggestions.json"), "w", encoding="utf-8") as f:
-              json.dump(suggestions, f)
-          output(result="ok", includes=total, suggested=suggested)
-          EOF
-
-      - name: Post the fix
-        if: always() && steps.find.outputs.pr != ''
-        uses: actions/github-script@v9
-        env:
-          PR: ${{ steps.find.outputs.pr }}
-          MENTION: ${{ steps.find.outputs.mention }}
-          REQUEST_ID: ${{ steps.find.outputs.request-id }}
-          HEAD_SHA: ${{ steps.find.outputs.head-sha }}
-          RESULT: ${{ steps.place.outputs.result }}
-          INCLUDES: ${{ steps.place.outputs.includes }}
-          SUGGESTED: ${{ steps.place.outputs.suggested }}
-        with:
-          script: |
-            const fs = require('fs');
-            const path = require('path');
-            const MARKER = '<!-- pr-tidy-bot -->';
-            // GitHub's limit on a review body is 65536 characters.
-            const MAX_PATCH = 60000;
-
-            const { owner, repo } = context.repo;
-            const { PR, MENTION, REQUEST_ID, HEAD_SHA, RESULT, INCLUDES, SUGGESTED, RUNNER_TEMP } = process.env;
-            const issue_number = Number(PR);
-            const sha = HEAD_SHA.slice(0, 10);
-            const fixUrl = context.payload.workflow_run.html_url;
-            const runUrl = `${context.serverUrl}/${owner}/${repo}/actions/runs/${context.runId}`;
-
-            const react = (content) => REQUEST_ID
-              ? github.rest.reactions.createForIssueComment({ owner, repo, comment_id: Number(REQUEST_ID), content })
-              : Promise.resolve();
-            async function reply(body, content) {
-              await react(content);
-              await github.rest.issues.createComment({ owner, repo, issue_number, body: `${MARKER}\n${MENTION}${body}` });
-            }
-
-            const read = (...parts) => fs.readFileSync(path.join(RUNNER_TEMP, ...parts), 'utf8');
-            const passes = RESULT && read('clang-tidy-fix', 'status').trim() === '0';
-
-            if (RESULT === 'empty') {
-              return passes
-                ? reply(`clang-tidy passes on ${sha}. There is nothing to fix.`, '+1')
-                : reply(`clang-tidy has no automatic fix for what it reports on ${sha}. The findings, in the [fix run's log](${fixUrl}), need a manual edit.`, '-1');
-            }
-            if (RESULT === 'rejected') {
-              return reply(`the clang-tidy fix changes more than includes, so I didn't post it. See the [run log](${runUrl}).`, '-1');
-            }
-            if (RESULT === 'apply-failed') {
-              return reply(`the clang-tidy fix doesn't apply to ${sha}. Merge the base branch into the PR, then comment \`/bot fix-tidy\` again.`, '-1');
-            }
-            if (RESULT !== 'ok') {
-              return reply(`something went wrong. See the [run log](${runUrl}).`, '-1');
-            }
-
-            const patch = read('head.patch');
-            const suggestions = JSON.parse(read('suggestions.json'));
-
-            const one = INCLUDES === '1';
-            const includes = one ? '1 missing include' : `${INCLUDES} missing includes`;
-            const inline = SUGGESTED === '0'
-              ? (one ? 'It goes on a line this PR does not change, so I can\'t suggest it inline.'
-                     : 'They go on lines this PR does not change, so I can\'t suggest them inline.')
-              : SUGGESTED === INCLUDES
-                ? (one ? 'It is suggested inline below.' : 'Each is suggested inline below.')
-                : `${SUGGESTED} of them are suggested inline below; the rest go on lines this PR does not change.`;
-            const remaining = passes
-              ? `With ${one ? 'it' : 'them'}, clang-tidy passes.`
-              : `Some findings remain that need a manual edit; see the [fix run's log](${fixUrl}).`;
-            // A fence longer than any run of backticks in the patch's context lines.
-            const fence = '`'.repeat(Math.max(3, ...[...patch.matchAll(/`+/g)].map((m) => m[0].length + 1)));
-            const apply = patch.length > MAX_PATCH
-              ? `The full patch is too large to show here. Download \`fix.patch\` from the [fix run](${fixUrl}) and run \`git apply fix.patch\`.`
-              : `To apply ${one ? 'it' : 'all of them'}, run this in your checkout of the PR branch:\n\n${fence}sh\ngit apply <<'EOF'\n${patch}EOF\n${fence}`;
-            const body = (withSuggestions) => `${MARKER}\n${MENTION}clang-tidy's fix for ${sha} adds ${includes}. ` +
-              `${withSuggestions ? `${inline} ` : ''}${remaining}\n\n${apply}`;
-
-            const review = { owner, repo, pull_number: issue_number, commit_id: HEAD_SHA, event: 'COMMENT' };
-            try {
-              await github.rest.pulls.createReview({ ...review, body: body(true), comments: suggestions });
-            } catch (error) {
-              // A suggestion GitHub will not place still leaves the patch.
-              core.warning(`Posting the suggestions failed (${error.message}); posting the patch alone.`);
-              await github.rest.pulls.createReview({ ...review, body: body(false) });
-            }
-            await react('+1');
-
-  nudge:
-    if: >-
-      github.repository == 'OrcaSlicer/OrcaSlicer'
-      && github.event_name == 'workflow_run'
-      && github.event.workflow_run.name == 'clang-tidy'
-      && github.event.workflow_run.event == 'pull_request'
-    concurrency:
-      group: ${{ github.workflow }}-nudge-${{ github.event.workflow_run.head_repository.full_name }}-${{ github.event.workflow_run.head_branch }}
-      cancel-in-progress: false
-    permissions:
-      actions: read          # the check's steps
-      pull-requests: write   # comment on the PR
-      issues: write          # the comment
-    runs-on: ubuntu-latest
-    timeout-minutes: 5
-    steps:
-      - name: Ask for a fix when the check fails
-        uses: actions/github-script@v9
-        with:
-          script: |
-            const MARKER = '<!-- pr-tidy-bot-nudge -->';
-            // The clang-tidy step's name in clang_tidy.yml. A failure in any other
-            // step is the CI's, not the PR's.
-            const TIDY_STEP = 'Run clang-tidy on the changed lines';
-
-            const { owner, repo } = context.repo;
-            const run = context.payload.workflow_run;
-
-            // workflow_run lists no PR for a fork's branch, so the PR is found by its branch.
-            const { data: prs } = await github.rest.pulls.list({
-              owner, repo, state: 'open', head: `${run.head_repository.owner.login}:${run.head_branch}`
-            });
-            const pr = prs.find((p) => p.head.sha === run.head_sha);
-            if (!pr) {
-              core.info('No open PR at this run\'s commit; a newer run will answer.');
-              return;
-            }
-
-            const { data: { jobs } } = await github.rest.actions.listJobsForWorkflowRun({ owner, repo, run_id: run.id });
-            const failed = jobs.some((job) => (job.steps || []).some((step) => step.name === TIDY_STEP && step.conclusion === 'failure'));
-
-            const comments = await github.paginate(github.rest.issues.listComments, { owner, repo, issue_number: pr.number, per_page: 100 });
-            const previous = comments.find((c) => c.user.type === 'Bot' && (c.body || '').startsWith(MARKER));
-
-            if (!failed) {
-              // Removes the request once the check passes.
-              if (previous && run.conclusion === 'success') {
-                await github.rest.issues.deleteComment({ owner, repo, comment_id: previous.id });
-              }
-              return;
-            }
-
-            const body = `${MARKER}\n@${pr.user.login} the clang-tidy check found problems in this PR's changes ` +
-              `at ${run.head_sha.slice(0, 10)} ([log](${run.html_url})). Missing includes can be fixed either way:\n\n` +
-              '- run `scripts/run_clang_tidy.sh --fix` (`scripts\\run_clang_tidy.ps1 -Fix` on Windows) and push the result, or\n' +
-              '- comment `/bot fix-tidy`, and I\'ll suggest the fix here for you to apply.\n\n' +
-              'Other findings, such as a `using` in a header, need a manual edit.';
-            // Edits the earlier request instead of posting another, so each push does not notify again.
-            if (previous) {
-              await github.rest.issues.updateComment({ owner, repo, comment_id: previous.id, body });
-            } else {
-              await github.rest.issues.createComment({ owner, repo, issue_number: pr.number, body });
-            }
@@ -7478,7 +7478,7 @@ msgid "Update"
 msgstr "更新"

 msgid "Assistant(HMS)"
-msgstr "助手(HMS)"
+msgstr "助理（HMS）"

 #, c-format, boost-format
 msgid "Network plug-in v%s"
@@ -1,3 +0,0 @@
-<svg width="28" height="27" viewBox="0 0 28 27" fill="none" xmlns="http://www.w3.org/2000/svg">
-<path transform="matrix(0.9 0 0 0.9 1.4 1.35)" d="M11.9888 2.01601C12.8984 0.494662 15.1024 0.494662 16.012 2.01601L18.8677 6.79237C19.1958 7.34113 19.7339 7.73201 20.3572 7.87447L25.7821 9.11446C27.5101 9.50943 28.1913 11.6056 27.0254 12.9408L23.3652 17.1327C22.9449 17.6143 22.7394 18.2469 22.7964 18.8836L23.2936 24.4263C23.4519 26.1918 21.6687 27.4873 20.0386 26.7911L14.9209 24.6056C14.3329 24.3545 13.6679 24.3545 13.0799 24.6056L7.96209 26.7911C6.33196 27.4873 4.54887 26.1918 4.70722 24.4263L5.20434 18.8836C5.26145 18.2469 5.05595 17.6143 4.63544 17.1327L0.97533 12.9408C-0.19048 11.6056 0.490599 9.50943 2.21859 9.11446L7.64364 7.87447C8.2669 7.73201 8.80494 7.34113 9.13302 6.79237L11.9888 2.01601Z" stroke="#949494" stroke-width="2.4" stroke-linejoin="round"/>
-</svg>
@@ -1,6 +1,6 @@
 {
 	"name": "Qidi",
-	"version": "02.04.00.17",
+	"version": "02.04.00.16",
 	"force_update": "0",
 	"description": "Qidi configurations",
 	"machine_model_list": [
@@ -83,7 +83,7 @@
 	"extruder_clearance_height_to_lid": "120",
 	"layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nLOG_Z\nG92 E0\n",
 	"machine_end_gcode": "M141 S0\nM104 S0\nM140 S0\nG1 E-3 F1800\nG0 Z{min(max_print_height, max_layer_z + 3)} F600\nG0 X0 Y0 F12000\n{if max_layer_z < max_print_height / 2}G1 Z{max_print_height / 2 + 10} F600{else}G1 Z{min(max_print_height, max_layer_z + 3)}{endif}",
-	"machine_start_gcode": "PRINT_START BED=[bed_temperature_initial_layer_single] HOTEND=[nozzle_temperature_initial_layer] CHAMBER=[chamber_temperature]\nM83\nM140 S[bed_temperature_initial_layer_single]\nM104 S[nozzle_temperature_initial_layer]\nG4 P3000\nG0 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0)} Y{max((min(print_bed_max[1] - 5, first_layer_print_min[1] + 80) - 85), 0)} Z5 F6000\nG0 Z[initial_layer_print_height] F600\nG1 E3 F1800\nG1 X{(min(print_bed_max[0], first_layer_print_min[0] + 80))} E{85 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1] - 5, first_layer_print_min[1] + 80) - 85), 0) + 2} E{2 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85), 0)} E{85 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1] - 5, first_layer_print_min[1] + 80) - 85), 0) + 85} E{83 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85), 0) + 2} E{2 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1] - 5, first_layer_print_min[1] + 80) - 85), 0) + 3} E{82 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85), 0) + 3} Z0\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85), 0) + 6}\nG1 Z1 F600\n",
+	"machine_start_gcode": "PRINT_START BED=[hot_plate_temp_initial_layer] HOTEND=[nozzle_temperature_initial_layer] CHAMBER=[chamber_temperature]\nM83\nM140 S[hot_plate_temp_initial_layer]\nM104 S[nozzle_temperature_initial_layer]\nG4 P3000\nG0 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0)} Y{max((min(print_bed_max[1] - 5, first_layer_print_min[1] + 80) - 85), 0)} Z5 F6000\nG0 Z[initial_layer_print_height] F600\nG1 E3 F1800\nG1 X{(min(print_bed_max[0], first_layer_print_min[0] + 80))} E{85 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1] - 5, first_layer_print_min[1] + 80) - 85), 0) + 2} E{2 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85), 0)} E{85 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1] - 5, first_layer_print_min[1] + 80) - 85), 0) + 85} E{83 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85), 0) + 2} E{2 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1] - 5, first_layer_print_min[1] + 80) - 85), 0) + 3} E{82 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85), 0) + 3} Z0\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85), 0) + 6}\nG1 Z1 F600\n",
 	"thumbnails_format": "PNG",
 	"default_filament_profile": [
 		"Generic PLA @Qidi Q1 Pro 0.4 nozzle"
@@ -100,7 +100,7 @@
 	"default_filament_profile": [
 		"Generic PLA @Qidi"
 	],
-	"machine_start_gcode": "G28\nM140 S[bed_temperature_initial_layer_single]\nM190 S[bed_temperature_initial_layer_single]\nM109 S[nozzle_temperature_initial_layer]\nG92 E-19\nG0 Y5 Z0.3 F3600\nG1 X5 E0 F2400\n",
+	"machine_start_gcode": "G28\nM140 S[hot_plate_temp_initial_layer]\nM190 S[hot_plate_temp_initial_layer]\nM109 S[nozzle_temperature_initial_layer]\nG92 E-19\nG0 Y5 Z0.3 F3600\nG1 X5 E0 F2400\n",
 	"machine_end_gcode": "M104 S0\nM140 S0\n;Retract the filament\nG92 E0\nG1 E-3 F300\nG28\nM84\n",
 	"scan_first_layer": "0"
 }
@@ -24,7 +24,7 @@
 		"210x210/COLPIC",
 		"110x110/PNG"
 	],
-	"machine_start_gcode": "PRINT_START\nG28\nM141 S0\nG0 Z50 F600\nM190 S[bed_temperature_initial_layer_single]\nG28 Z\nG29; mesh bed leveling ,comment this code to close it\nG0 X0 Y0 Z50 F6000\nM141 S{overall_chamber_temperature}\nM109 S[nozzle_temperature_initial_layer]\nM106 P3 S255\nM83\nG4 P3000\nG0 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0)} Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0)} Z5 F6000\nG0 Z[initial_layer_print_height] F600\nG1 E3 F1800\nG1 X{(min(print_bed_max[0], first_layer_print_min[0] + 80))} E{85 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 2} E{2 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0)} E{85 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 85} E{83 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0) + 2} E{2 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 3} E{82 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0) + 12} E{-10 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 E{10 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\n",
+	"machine_start_gcode": "PRINT_START\nG28\nM141 S0\nG0 Z50 F600\nM190 S[hot_plate_temp_initial_layer]\nG28 Z\nG29; mesh bed leveling ,comment this code to close it\nG0 X0 Y0 Z50 F6000\nM141 S{overall_chamber_temperature}\nM109 S[nozzle_temperature_initial_layer]\nM106 P3 S255\nM83\nG4 P3000\nG0 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0)} Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0)} Z5 F6000\nG0 Z[initial_layer_print_height] F600\nG1 E3 F1800\nG1 X{(min(print_bed_max[0], first_layer_print_min[0] + 80))} E{85 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 2} E{2 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0)} E{85 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 85} E{83 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0) + 2} E{2 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 3} E{82 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0) + 12} E{-10 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 E{10 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\n",
 	"machine_end_gcode": "M141 S0\nM104 S0\nM140 S0\nG1 E-3 F1800\nG0 Z{min(max_print_height, max_layer_z + 3)} F600\nG0 X0 Y0 F12000\n{if max_layer_z < max_print_height / 2}G1 Z{max_print_height / 2 + 10} F600{else}G1 Z{min(max_print_height, max_layer_z + 3)}{endif}",
 	"scan_first_layer": "0"
 }
@@ -1,7 +1,7 @@
 #!/usr/bin/env sh

-# Work-around https://gitlab.gnome.org/GNOME/gnome-build-meta/-/issues/754
-grep -q org.freedesktop.Platform.GL.nvidia /.flatpak-info && export WEBKIT_DISABLE_DMABUF_RENDERER=1
+# WebKit's NVIDIA DMABUF workaround (gnome-build-meta#754) is applied by the
+# binary itself, gated on the runtime WebKitGTK version (src/OrcaSlicer.cpp).

 # Work-around https://github.com/bambulab/BambuStudio/issues/3440
 # Use LC_NUMERIC instead of LC_ALL to prevent decimal separator issues
@@ -161,6 +161,7 @@ using json = nlohmann::json;
 #include <X11/Xlib.h>
 #endif
 #include <unistd.h>
+#include "slic3r/GUI/Widgets/WebView.hpp"
 #endif

 #ifdef SLIC3R_GUI
@@ -1153,8 +1154,9 @@ int CLI::run(int argc, char **argv)
    // opt-in path. The ~2020-era WebKit2GTK XWayland compositor bug it
    // worked around appears fixed in WebKit2GTK >= 2.42; leaving it
    // unset preserves WebKit hardware acceleration on Device / Setup
-    // Wizard / login / store. The default path still applies it on
-    // XWayland sessions as a conservative fallback for older WebKit.
+    // Wizard / login / store. The default path applies it only on
+    // XWayland sessions and only when the linked WebKitGTK predates the
+    // fix (< 2.42), as a conservative fallback for older WebKit.
    // ------------------------------------------------------------------
    {
        const char* gdk_backend = ::getenv("GDK_BACKEND");
@@ -1162,6 +1164,14 @@ int CLI::run(int argc, char **argv)
        // honours the first backend in the comma-separated list).
        const bool x11_opt_in = gdk_backend && boost::starts_with(gdk_backend, "x11");

+        // NVIDIA's proprietary driver cannot back WebKitGTK's DMABUF renderer.
+        // Force the shared-memory transport, which keeps compositing and threaded
+        // scrolling; the second variable clears Debian/Ubuntu/openSUSE's isNVIDIA().
+        if (::access("/proc/driver/nvidia/version", F_OK) == 0 && WebView::SupportsForceSharedMemory()) {
+            ::setenv("WEBKIT_DMABUF_RENDERER_FORCE_SHM", "1", /* replace */ false);
+            ::setenv("WEBKIT_FORCE_DMABUF_RENDERER", "1", /* replace */ false);
+        }
+
        if (x11_opt_in) {
            // ===== X11 / XWayland (opted in via GDK_BACKEND=x11) =====
            BOOST_LOG_TRIVIAL(info) << "GDK_BACKEND=x11 detected; applying v2.3.2 X11/XWayland workarounds.";
@@ -1205,15 +1215,15 @@ int CLI::run(int argc, char **argv)
            }
            #endif

-            // WebKit2GTK compositing can fail under XWayland on older
-            // WebKit releases. Disable it only when both DISPLAY and
-            // WAYLAND_DISPLAY are set (i.e. an XWayland session is in
-            // use). On pure X11 or native Wayland, compositing is left
-            // enabled so WebKit retains HW acceleration.
+            // WebKit2GTK accelerated compositing could fail under XWayland
+            // on WebKit releases before 2.42. Disable it only then, and only
+            // when both DISPLAY and WAYLAND_DISPLAY are set (an XWayland
+            // session). Disabling it also turns off threaded scrolling, so on
+            // newer WebKit it only costs performance.
            {
                const char* display_env_wk = ::getenv("DISPLAY");
                const char* wayland_env_wk = ::getenv("WAYLAND_DISPLAY");
-                if (display_env_wk && *display_env_wk && wayland_env_wk && *wayland_env_wk) {
+                if (WebView::NeedsCompositingWorkaround() && display_env_wk && *display_env_wk && wayland_env_wk && *wayland_env_wk) {
                    ::setenv("WEBKIT_DISABLE_COMPOSITING_MODE", "1", /* replace */ false);
                }
            }
@@ -429,7 +429,8 @@ if [ "\$XDG_SESSION_TYPE" = "wayland" ] && [ "\$ZINK_DISABLE_OVERRIDE" != "1" ];
                export __EGL_VENDOR_LIBRARY_FILENAMES=/usr/share/glvnd/egl_vendor.d/50_mesa.json
                export MESA_LOADER_DRIVER_OVERRIDE=zink
                export GALLIUM_DRIVER=zink
-                export WEBKIT_DISABLE_DMABUF_RENDERER=1
+                # WebKit's NVIDIA DMABUF workaround is applied by the binary itself,
+                # gated on the runtime WebKitGTK version (src/OrcaSlicer.cpp).
            fi
        fi
    fi
@@ -1729,8 +1729,8 @@ void PlateData::parse_filament_info(GCodeProcessorResult *result)
            //plate->pattern_file = it->second->pattern_file;
            plate->no_light_thumbnail_file = it->second->no_light_thumbnail_file;
            plate->top_file = it->second->top_file;
-            plate->pick_file = it->second->pick_file;
-            plate->pattern_bbox_file = it->second->pattern_bbox_file;
+            plate->pick_file = it->second->pick_file.empty();
+            plate->pattern_bbox_file = it->second->pattern_bbox_file.empty();
            plate->config = it->second->config;

            if (!plate->thumbnail_file.empty())
@@ -3295,7 +3295,7 @@ void GCode::_do_export(Print& print, GCodeOutputStream &file, ThumbnailsGenerato
    m_is_role_based_fan_on.fill(false);
    m_role_based_fan_marker_layer.fill(-1);

-    m_fan_mover.reset();
+    m_fan_mover.release();
    m_ordering_cache.clear();

    // Belt printer: initialize belt-specific writer via virtual hook.
@@ -16,7 +16,6 @@
 #include <wx/checklst.h>
 #include "slic3r/GUI/GUI_Utils.hpp"
 #include "slic3r/GUI/Widgets/Button.hpp"
-#include "slic3r/GUI/Widgets/DropDown.hpp"
 #include "slic3r/GUI/Widgets/Label.hpp"
 #include <utility>
 #include "slic3r/GUI/wxExtensions.hpp"
@@ -173,26 +172,7 @@ void AMSMaterialsSetting::create()

    Bind(wxEVT_PAINT, &AMSMaterialsSetting::paintEvent, this);
    Bind(EVT_SELECTED_COLOR, &AMSMaterialsSetting::on_picker_color, this);
-    m_comboBox_filament->Connect(wxEVT_COMMAND_COMBOBOX_SELECTED, wxCommandEventHandler(AMSMaterialsSetting::on_select_filament), NULL, this);
-    m_comboBox_filament->Bind(EVT_DROPDOWN_ITEM_ACTION, &AMSMaterialsSetting::on_toggle_favorite_filament, this);
-
-    // Favorites toggled in the open list are regrouped just before it opens again, so rows never move
-    // under the cursor. These handlers run ahead of ComboBox's own, which then measure and show the
-    // rebuilt rows; wxEVT_COMBOBOX_DROPDOWN would be too late, as ComboBox sends it after showing the list.
-    auto regroup_favorites = [this]() {
-        if (!m_favorites_regroup || m_comboBox_filament->is_drop_down())
-            return;
-        const FilamentInfos* info        = selected_filament_info();
-        const std::string    filament_id = info ? info->filament_id : std::string();
-        rebuild_filament_dropdown_items(filament_id);
-    };
-    m_comboBox_filament->Bind(wxEVT_LEFT_DOWN, [regroup_favorites](wxMouseEvent& e) { regroup_favorites(); e.Skip(); });
-    m_comboBox_filament->Bind(wxEVT_LEFT_DCLICK, [regroup_favorites](wxMouseEvent& e) { regroup_favorites(); e.Skip(); });
-    m_comboBox_filament->Bind(wxEVT_KEY_DOWN, [regroup_favorites](wxKeyEvent& e) {
-        if (e.GetKeyCode() == WXK_RETURN || e.GetKeyCode() == WXK_SPACE) // the keys that open the list
-            regroup_favorites();
-        e.Skip();
-    });
+     m_comboBox_filament->Connect(wxEVT_COMMAND_COMBOBOX_SELECTED, wxCommandEventHandler(AMSMaterialsSetting::on_select_filament), NULL, this);

    m_comboBox_cali_result->Connect(wxEVT_COMMAND_COMBOBOX_SELECTED, wxCommandEventHandler(AMSMaterialsSetting::on_select_cali_result), NULL, this);
 }
@@ -211,9 +191,11 @@ void AMSMaterialsSetting::create_panel_normal(wxWindow* parent)

    m_sizer_filament->Add(0, 0, 0, wxEXPAND, 0);

+#ifdef __APPLE__
+    m_comboBox_filament = new wxComboBox(parent, wxID_ANY, wxEmptyString, wxDefaultPosition, AMS_MATERIALS_SETTING_COMBOX_WIDTH, 0, nullptr, wxCB_READONLY);
+#else
    m_comboBox_filament = new ::ComboBox(parent, wxID_ANY, wxEmptyString, wxDefaultPosition, AMS_MATERIALS_SETTING_COMBOX_WIDTH, 0, nullptr, wxCB_READONLY);
-    m_star_filled = ScalableBitmap(this, "score_star_light", 16);
-    m_star_empty  = ScalableBitmap(this, "score_star_outline", 16);
+#endif

    m_sizer_filament->Add(m_comboBox_filament, 1, wxALIGN_CENTER, 0);

@@ -438,7 +420,6 @@ void AMSMaterialsSetting::paintEvent(wxPaintEvent &evt)
 AMSMaterialsSetting::~AMSMaterialsSetting()
 {
    m_comboBox_filament->Disconnect(wxEVT_COMMAND_COMBOBOX_SELECTED, wxCommandEventHandler(AMSMaterialsSetting::on_select_filament), NULL, this);
-    m_comboBox_filament->Unbind(EVT_DROPDOWN_ITEM_ACTION, &AMSMaterialsSetting::on_toggle_favorite_filament, this);
    m_comboBox_cali_result->Disconnect(wxEVT_COMMAND_COMBOBOX_SELECTED, wxCommandEventHandler(AMSMaterialsSetting::on_select_cali_result), NULL, this);
 }

@@ -550,9 +531,10 @@ void AMSMaterialsSetting::on_select_reset(wxCommandEvent& event) {
    std::string   selected_ams_id;
    PresetBundle *preset_bundle = wxGetApp().preset_bundle;
    if (preset_bundle) {
-        const FilamentInfos* selected_info = selected_filament_info();
        for (auto it = preset_bundle->filaments.begin(); it != preset_bundle->filaments.end(); it++) {
-            if (selected_info && it->filament_id.compare(selected_info->filament_id) == 0) {
+            auto        filament_item = map_filament_items[m_comboBox_filament->GetValue().ToStdString()];
+            std::string filament_id   = filament_item.filament_id;
+            if (it->filament_id.compare(filament_id) == 0) {
                selected_ams_id = it->filament_id;
                break;
            }
@@ -700,13 +682,12 @@ void AMSMaterialsSetting::on_select_ok(wxCommandEvent &event)
    ams_setting_id = "";

    // the combobox item
-    const FilamentInfos* selected_info = selected_filament_info();
-    const std::string    filament_id   = selected_info ? selected_info->filament_id : std::string();
+    auto filament_item = map_filament_items[m_comboBox_filament->GetValue().ToStdString()];

    // check filament info (rack-gated per-nozzle blacklist evaluation)
    PresetBundle* preset_bundle = wxGetApp().preset_bundle;
    const auto& fila_check_res = sCheckFilamentInfo(preset_bundle, obj, ams_id, slot_id,
-                                                    filament_id, ams_filament_id, ams_setting_id);
+                                                    filament_item.filament_id, ams_filament_id, ams_setting_id);

    if (const auto& prohibit_items = fila_check_res.get_items_by_action("prohibition"); !prohibit_items.empty()) {
        wxString info_msg;
@@ -1005,133 +986,6 @@ static void _collect_filament_info(const wxString& shown_name,
    query_filament_types[shown_name] = filament.config.get_filament_type();
 }

-static const char* AMS_FAVORITE_FILAMENT_IDS_KEY = "ams_favorite_filament_ids";
-
-const AMSMaterialsSetting::FilamentInfos* AMSMaterialsSetting::selected_filament_info() const
-{
-    const int selection = m_comboBox_filament->GetSelection();
-    if (selection < 0 || selection >= int(m_filament_list_items.size()) || !m_filament_list_items[selection].is_filament)
-        return nullptr;
-    return &m_filament_list_items[selection].filament;
-}
-
-std::set<std::string> AMSMaterialsSetting::load_favorite_filament_ids() const
-{
-    std::set<std::string> favorite_ids;
-    std::vector<std::string> values;
-    const std::string serialized = wxGetApp().app_config->get(AMS_FAVORITE_FILAMENT_IDS_KEY);
-    if (!serialized.empty() && Slic3r::unescape_strings_cstyle(serialized, values)) {
-        favorite_ids.insert(values.begin(), values.end());
-    }
-    return favorite_ids;
-}
-
-void AMSMaterialsSetting::save_favorite_filament_ids(const std::set<std::string>& favorite_ids)
-{
-    std::vector<std::string> values(favorite_ids.begin(), favorite_ids.end());
-    wxGetApp().app_config->set(AMS_FAVORITE_FILAMENT_IDS_KEY, Slic3r::escape_strings_cstyle(values));
-    wxGetApp().app_config->save();
-}
-
-void AMSMaterialsSetting::rebuild_filament_dropdown_items(const std::string& selected_filament_id)
-{
-    std::vector<DropDown::Item> items;
-    m_filament_list_items.clear();
-
-    auto append_header = [&items, this](const wxString& label) {
-        DropDown::Item item;
-        item.text = label;
-        item.style = DD_ITEM_STYLE_SPLIT_ITEM | DD_ITEM_STYLE_DISABLED;
-        items.push_back(item);
-        m_filament_list_items.push_back(FilamentListItem{});
-    };
-
-    auto append_filament = [&items, this](const wxString& name) {
-        auto info_it = map_filament_items.find(name);
-        if (info_it == map_filament_items.end())
-            return;
-
-        DropDown::Item item;
-        item.text = name;
-        items.push_back(item);
-        m_filament_list_items.push_back(FilamentListItem{info_it->second, true});
-    };
-
-    // Favorites are listed again at the top under their own header. Without any, the list is the
-    // plain filament list.
-    const std::set<std::string> favorite_ids = load_favorite_filament_ids();
-    std::vector<wxString>       favorites;
-    for (const wxString& name : m_sorted_filament_items) {
-        auto info_it = map_filament_items.find(name);
-        if (info_it != map_filament_items.end() && favorite_ids.count(info_it->second.filament_id) > 0)
-            favorites.push_back(name);
-    }
-    if (!favorites.empty()) {
-        append_header(_L("Favorite filaments"));
-        for (const wxString& name : favorites)
-            append_filament(name);
-        append_header(_L("All filaments"));
-    }
-    for (const wxString& name : m_sorted_filament_items)
-        append_filament(name);
-
-    int selection_idx = -1;
-    if (!selected_filament_id.empty()) {
-        for (int i = 0; i < int(m_filament_list_items.size()); ++i) {
-            if (m_filament_list_items[i].is_filament && m_filament_list_items[i].filament.filament_id == selected_filament_id) {
-                selection_idx = i;
-                break;
-            }
-        }
-    }
-
-    // Clear() first: SetItems() keeps the old selection, and SetSelection() ignores an index equal to it,
-    // which would leave the previous filament's name on the combo.
-    m_comboBox_filament->Clear();
-    m_comboBox_filament->SetItems(items);
-    update_favorite_stars();
-    m_comboBox_filament->SetSelection(selection_idx);
-    m_favorites_regroup = false;
-}
-
-void AMSMaterialsSetting::update_favorite_stars()
-{
-    const std::set<std::string> favorite_ids = load_favorite_filament_ids();
-    for (size_t i = 0; i < m_filament_list_items.size(); ++i) {
-        const FilamentListItem& row = m_filament_list_items[i];
-        if (row.is_filament) {
-            const bool favorite = favorite_ids.count(row.filament.filament_id) > 0;
-            m_comboBox_filament->SetItemActionBitmap(i, favorite ? m_star_filled.bmp() : m_star_empty.bmp());
-        }
-    }
-}
-
-void AMSMaterialsSetting::toggle_favorite_filament(const std::string& filament_id)
-{
-    if (filament_id.empty())
-        return;
-
-    std::set<std::string> favorite_ids = load_favorite_filament_ids();
-    auto iter = favorite_ids.find(filament_id);
-    if (iter == favorite_ids.end())
-        favorite_ids.insert(filament_id);
-    else
-        favorite_ids.erase(iter);
-
-    save_favorite_filament_ids(favorite_ids);
-}
-
-void AMSMaterialsSetting::on_toggle_favorite_filament(wxCommandEvent& evt)
-{
-    const int index = evt.GetInt();
-    if (index < 0 || index >= int(m_filament_list_items.size()) || !m_filament_list_items[index].is_filament)
-        return;
-
-    toggle_favorite_filament(m_filament_list_items[index].filament.filament_id);
-    update_favorite_stars();
-    m_favorites_regroup = true;
-}
-
 void AMSMaterialsSetting::Popup(wxString filament, wxString sn, wxString temp_min, wxString temp_max, wxString k, wxString n)
 {
    if (!obj) return;
@@ -1145,12 +999,13 @@ void AMSMaterialsSetting::Popup(wxString filament, wxString sn, wxString temp_mi
    m_input_k_val->GetTextCtrl()->SetValue(k);
    m_input_n_val->GetTextCtrl()->SetValue(n);

+    wxArrayString filament_items;
    wxString bambu_filament_name;
+    wxString hint_filament_name; // the hint type to be selected
    std::unordered_map<wxString, wxString> query_filament_vendors;// some information for sort
    std::unordered_map<wxString, wxString> query_filament_types;  //

    std::set<std::string> filament_id_set;
-    m_sorted_filament_items.clear();
    // The alias keyed map has to start empty: it is a member, so a stale alias left by an earlier
    // popup (a different printer, a different nozzle) would resolve to that printer's filament_id.
    map_filament_items.clear();
@@ -1180,7 +1035,7 @@ void AMSMaterialsSetting::Popup(wxString filament, wxString sn, wxString temp_mi
            if (alias.empty())
                continue;

-            m_sorted_filament_items.push_back(alias);
+            filament_items.push_back(alias);
            _collect_filament_info(alias, *filament_it, query_filament_vendors, query_filament_types);

            FilamentInfos filament_infos;
@@ -1189,6 +1044,7 @@ void AMSMaterialsSetting::Popup(wxString filament, wxString sn, wxString temp_mi
            map_filament_items[alias]  = filament_infos;

            if (filament_it->filament_id == ams_filament_id) {
+                hint_filament_name = from_u8(alias);
                bambu_filament_name = from_u8(alias);


@@ -1359,11 +1215,24 @@ void AMSMaterialsSetting::Popup(wxString filament, wxString sn, wxString temp_mi
            return name_compare != 0 ? name_compare < 0 : left < right;
        };

-        std::sort(m_sorted_filament_items.begin(), m_sorted_filament_items.end(), _filament_sorter);
+        std::sort(filament_items.begin(), filament_items.end(), _filament_sorter);
    }

-    rebuild_filament_dropdown_items(ams_filament_id);
-    int selection_idx = m_comboBox_filament->GetSelection();
+    // traverse the hint selection idx
+    int selection_idx = -1;
+    {
+        for(int i = 0; i < filament_items.size(); i++)
+        {
+            if (hint_filament_name == filament_items[i])
+            {
+                selection_idx = i;
+                break;
+            }
+        }
+    }
+
+    m_comboBox_filament->Set(filament_items);
+    m_comboBox_filament->SetSelection(selection_idx);
    post_select_event(selection_idx);

    if (selection_idx < 0) {
@@ -1420,7 +1289,6 @@ void AMSMaterialsSetting::on_select_filament(wxCommandEvent &evt)
    int* from_printer = static_cast<int*>(m_comboBox_filament->GetClientData());

    m_filament_type = "";
-    const FilamentInfos* selected_info = selected_filament_info();
    PresetBundle* preset_bundle = wxGetApp().preset_bundle;
    if (preset_bundle) {
        std::ostringstream stream;
@@ -1441,8 +1309,9 @@ void AMSMaterialsSetting::on_select_filament(wxCommandEvent &evt)
        std::string nozzle_diameter_str = stream.str();
        // Resolve the selection against the same list Popup() built the dropdown from, so the two
        // halves of the dialog cannot disagree about which filaments this machine can use.
-        if (selected_info) {
-            const std::string& filament_id = selected_info->filament_id;
+        const std::string selected = m_comboBox_filament->GetValue().ToStdString();
+        if (!selected.empty()) {
+            const std::string filament_id = map_filament_items[selected].filament_id;
            for (Preset *it : preset_bundle->get_filament_presets_for_machine(
                     DevPrinterConfigUtil::get_printer_display_name(obj->printer_type), nozzle_diameter_str, obj->is_support_user_preset)) {
                if (it->filament_id != filament_id)
@@ -1495,7 +1364,7 @@ void AMSMaterialsSetting::on_select_filament(wxCommandEvent &evt)
    //reset cali
    int cali_select_idx = -1;

-    if ( !this->obj || m_filament_selection < 0 || !selected_info) {
+    if ( !this->obj || m_filament_selection < 0) {
        m_input_k_val->Enable(false);
        m_input_n_val->Enable(false);
        m_button_confirm->Disable(); // ORCA No need to change style
@@ -1514,9 +1383,21 @@ void AMSMaterialsSetting::on_select_filament(wxCommandEvent &evt)
    ams_filament_id = "";
    ams_setting_id = "";

-    if (selected_info) {
-        ams_filament_id = selected_info->filament_id;
-        ams_setting_id  = selected_info->setting_id;
+    if (preset_bundle) {
+        for (auto it = preset_bundle->filaments.begin(); it != preset_bundle->filaments.end(); it++) {
+            auto itor = map_filament_items.find(m_comboBox_filament->GetValue().ToStdString());
+            if ( itor != map_filament_items.end()) {
+                ams_filament_id = itor->second.filament_id;
+                ams_setting_id  = itor->second.setting_id;
+                break;
+            }
+
+            if (it->alias.compare(m_comboBox_filament->GetValue().ToStdString()) == 0) {
+                ams_filament_id = it->filament_id;
+                ams_setting_id = it->setting_id;
+                break;
+            }
+        }
    }

    wxArrayString items;
@@ -1648,11 +1529,6 @@ void AMSMaterialsSetting::on_dpi_changed(const wxRect &suggested_rect)
    m_button_reset->Rescale(); // ORCA
    m_button_confirm->Rescale(); // ORCA
    m_button_close->Rescale(); // ORCA
-    // An open list would keep the measurements of the old stars, so close it before replacing them.
-    m_comboBox_filament->CloseDropdown();
-    m_star_filled.msw_rescale();
-    m_star_empty.msw_rescale();
-    update_favorite_stars();
    this->Refresh();
 }

@@ -31,7 +31,6 @@
 #include "slic3r/GUI/Widgets/StateColor.hpp"
 #include <wx/panel.h>
 #include <map>
-#include <set>

 #define AMS_MATERIALS_SETTING_DEF_COLOUR wxColour(255, 255, 255)
 #define AMS_MATERIALS_SETTING_GREY900 wxColour(38, 46, 48)
@@ -157,7 +156,6 @@ protected:
    void create_panel_kn(wxWindow* parent);
    void on_dpi_changed(const wxRect &suggested_rect) override;
    void on_select_filament(wxCommandEvent& evt);
-    void on_toggle_favorite_filament(wxCommandEvent& evt);
    void on_select_cali_result(wxCommandEvent &evt);
    void on_select_ok(wxCommandEvent &event);
    void on_select_reset(wxCommandEvent &event);
@@ -165,11 +163,6 @@ protected:
    void on_clr_picker(wxMouseEvent &event);
    bool is_virtual_tray();
    void update_widgets();
-    void rebuild_filament_dropdown_items(const std::string& selected_filament_id);
-    void update_favorite_stars();
-    std::set<std::string> load_favorite_filament_ids() const;
-    void save_favorite_filament_ids(const std::set<std::string>& favorite_ids);
-    void toggle_favorite_filament(const std::string& filament_id);

    void update_filament_editing(bool is_printing);
    // Orca: the variant index of the filament's per-variant options on the nozzle this tray feeds
@@ -209,7 +202,12 @@ protected:

    int m_pa_cali_select_id = 0;

+// Orca: native wxComboBox on macOS (the custom ComboBox mis-renders the filament dropdown there)
+#ifdef __APPLE__
+    wxComboBox *m_comboBox_filament;
+#else
    ComboBox *m_comboBox_filament;
+#endif
    ComboBox * m_comboBox_cali_result;
    TextInput*       m_readonly_filament;

@@ -217,20 +215,7 @@ protected:
        std::string filament_id;
        std::string setting_id;
    };
-    struct FilamentListItem {
-        FilamentInfos filament;
-        bool          is_filament{false};
-    };
-    const FilamentInfos* selected_filament_info() const;
-
-    // Keyed by the same wxString the dropdown shows, so a row's name never has to be converted back.
-    std::map<wxString, FilamentInfos>    map_filament_items;
-    std::vector<wxString>                m_sorted_filament_items;
-    std::vector<FilamentListItem>        m_filament_list_items;
-    ScalableBitmap                       m_star_filled;
-    ScalableBitmap                       m_star_empty;
-    // Favorites changed while the list was open; their rows are regrouped before it opens again.
-    bool                                 m_favorites_regroup{false};
+    std::map<std::string, FilamentInfos> map_filament_items;
 };

 wxDECLARE_EVENT(EVT_SELECTED_COLOR, wxCommandEvent);
@@ -3232,16 +3232,9 @@ bool GUI_App::on_init_inner()
 #ifdef _MSW_DARK_MODE

 #ifndef __WINDOWS__
-    // The label colours and the dark mode flag were set above from the saved mode. When the system theme
-    // differs from it, refresh them, or dialogs that map their colours stay in the old mode for this session.
-    const bool saved_dark_mode = dark_mode();
    wxSystemAppearance app = wxSystemSettings::GetAppearance();
    GUI::wxGetApp().app_config->set("dark_color_mode", app.IsDark() ? "1" : "0");
    GUI::wxGetApp().app_config->save();
-    if (dark_mode() != saved_dark_mode) {
-        init_label_colours();
-        Update_dark_mode_flag();
-    }
 #endif // __APPLE__


@@ -1617,7 +1617,7 @@ void ObjectList::list_manipulation(const wxPoint& mouse_pos, bool evt_context_me
            int obj_idx, vol_idx;
            get_selected_item_indexes(obj_idx, vol_idx, item);
            if (obj_idx != -1) {
-                Plater::TakeSnapshot snapshot(plater, _u8L("Shift objects to bed"));
+                Plater::TakeSnapshot(plater, _u8L("Shift objects to bed"));
                (*m_objects)[obj_idx]->ensure_on_bed();
                cnv->reload_scene(true, true);
                update_info_items(obj_idx);
@@ -2779,13 +2779,12 @@ void ObjectList::del_info_item(const int obj_idx, InfoItemType type)
    GLCanvas3D* cnv = plater->canvas3D();

    switch (type) {
-    case InfoItemType::CustomSupports: {
+    case InfoItemType::CustomSupports:
        cnv->get_gizmos_manager().reset_all_states();
-        Plater::TakeSnapshot snapshot(plater, "Remove support painting");
+        Plater::TakeSnapshot(plater, "Remove support painting");
        for (ModelVolume* mv : (*m_objects)[obj_idx]->volumes)
            mv->supported_facets.reset();
        break;
-    }

    // BBS: remove CustomSeam

@@ -2796,21 +2795,19 @@ void ObjectList::del_info_item(const int obj_idx, InfoItemType type)
        }
        break;

-    case InfoItemType::MmSegmentation: {
+    case InfoItemType::MmSegmentation:
        cnv->get_gizmos_manager().reset_all_states();
-        Plater::TakeSnapshot snapshot(plater, "Remove color painting");
+        Plater::TakeSnapshot(plater, "Remove color painting");
        for (ModelVolume* mv : (*m_objects)[obj_idx]->volumes)
            mv->mmu_segmentation_facets.reset();
        break;
-    }

-    case InfoItemType::FuzzySkin: {
+    case InfoItemType::FuzzySkin:
        cnv->get_gizmos_manager().reset_all_states();
-        Plater::TakeSnapshot snapshot(plater, _u8L("Remove paint-on fuzzy skin"));
+        Plater::TakeSnapshot(plater, _u8L("Remove paint-on fuzzy skin"));
        for (ModelVolume* mv : (*m_objects)[obj_idx]->volumes)
            mv->fuzzy_skin_facets.reset();
        break;
-    }

    // BBS: remove Sinking
    case InfoItemType::Undef : assert(false); break;
@@ -6721,7 +6718,7 @@ void ObjectList::OnEditingStarted(wxDataViewEvent &event)
    else if (col == colSinking) {
        Plater *    plater = wxGetApp().plater();
        GLCanvas3D *cnv    = plater->canvas3D();
-        Plater::TakeSnapshot snapshot(plater, _u8L("Shift objects to bed"));
+        Plater::TakeSnapshot(plater, _u8L("Shift objects to bed"));
        int obj_idx, vol_idx;
        get_selected_item_indexes(obj_idx, vol_idx, item);
        (*m_objects)[obj_idx]->ensure_on_bed();
@@ -82,11 +82,6 @@ ComboBox::ComboBox(wxWindow *parent,
        e.SetId(GetId());
        GetEventHandler()->ProcessEvent(e);
    });
-    drop.Bind(EVT_DROPDOWN_ITEM_ACTION, [this](wxCommandEvent &e) {
-        e.SetEventObject(this);
-        e.SetId(GetId());
-        GetEventHandler()->ProcessEvent(e);
-    });
    drop.Bind(EVT_DISMISS, [this](auto &) {
        drop_down = false;
        wxCommandEvent e(wxEVT_COMBOBOX_CLOSEUP);
@@ -256,7 +251,7 @@ int ComboBox::Append(const wxString &text,
                     int style)
 {
    auto valid_bit_map = bitmap.IsOk() ? bitmap : wxNullBitmap;
-    Item item{text, wxEmptyString, valid_bit_map, valid_bit_map, wxNullBitmap, clientData, group_key, group_label};
+    Item item{text, wxEmptyString, valid_bit_map, valid_bit_map, clientData, group_key, group_label};
    item.style = style;
    items.push_back(item);
    SetClientDataType(wxClientData_Void);
@@ -302,12 +297,6 @@ void ComboBox::ForceDropdownOpen()
    }
 }

-void ComboBox::CloseDropdown()
-{
-    if (drop.IsShown())
-        drop.DismissAndNotify();
-}
-
 unsigned int ComboBox::GetCount() const { return items.size(); }

 void ComboBox::set_replace_text(wxString text, wxString image_name)
@@ -361,13 +350,6 @@ void ComboBox::SetItemBitmap(unsigned int n, wxBitmap const &bitmap)
    drop.Invalidate();
 }

-void ComboBox::SetItemActionBitmap(unsigned int n, wxBitmap const &bitmap)
-{
-    if (n >= items.size()) return;
-    items[n].action_icon = bitmap.IsOk() ? bitmap : wxNullBitmap;
-    drop.Invalidate();
-}
-
 int ComboBox::DoInsertItems(const wxArrayStringsAdapter &items,
                            unsigned int                 pos,
                            void **                      clientData,
@@ -375,7 +357,7 @@ int ComboBox::DoInsertItems(const wxArrayStringsAdapter &items,
 {
    if (pos > this->items.size()) return -1;
    for (int i = 0; i < items.GetCount(); ++i) {
-        Item item { items[i], wxEmptyString, wxNullBitmap, wxNullBitmap, wxNullBitmap, clientData ? clientData[i] : NULL };
+        Item item { items[i], wxEmptyString, wxNullBitmap, wxNullBitmap, clientData ? clientData[i] : NULL };
        this->items.insert(this->items.begin() + pos, item);
        ++pos;
    }
@@ -437,18 +419,16 @@ void ComboBox::keyDown(wxKeyEvent& event)
        case WXK_UP:
        case WXK_DOWN:
        case WXK_LEFT:
-        case WXK_RIGHT: {
-            // Step over disabled rows: the mouse cannot select them either.
-            const int step = (event.GetKeyCode() == WXK_UP || event.GetKeyCode() == WXK_LEFT) ? -1 : 1;
-            int       n    = GetSelection() + step;
-            while (n >= 0 && n < int(items.size()) && (items[n].style & DD_ITEM_STYLE_DISABLED))
-                n += step;
-            if (n < 0 || n >= int(items.size()))
+        case WXK_RIGHT:
+            if ((event.GetKeyCode() == WXK_UP || event.GetKeyCode() == WXK_LEFT) && GetSelection() > 0) {
+                SetSelection(GetSelection() - 1);
+            } else if ((event.GetKeyCode() == WXK_DOWN || event.GetKeyCode() == WXK_RIGHT) && GetSelection() + 1 < items.size()) {
+                SetSelection(GetSelection() + 1);
+            } else {
                break;
-            SetSelection(n);
+            }
            sendComboBoxEvent();
            break;
-        }
        case WXK_TAB:
            HandleAsNavigationKey(event);
            break;
@@ -96,12 +96,10 @@ public:

    wxBitmap GetItemBitmap(unsigned int n);
    void     SetItemBitmap(unsigned int n, wxBitmap const &bitmap);
-    void     SetItemActionBitmap(unsigned int n, wxBitmap const &bitmap);
    bool     is_drop_down(){return drop_down;}
    void     DeleteOneItem(unsigned int pos) { DoDeleteOneItem(pos); }

    void ForceDropdownOpen();
-    void CloseDropdown();

 protected:
    virtual int  DoInsertItems(const wxArrayStringsAdapter &items,
@@ -30,7 +30,6 @@
 #include "slic3r/GUI/wxExtensions.hpp"

 wxDEFINE_EVENT(EVT_DISMISS, wxCommandEvent);
-wxDEFINE_EVENT(EVT_DROPDOWN_ITEM_ACTION, wxCommandEvent);

 BEGIN_EVENT_TABLE(DropDown, PopupWindow)

@@ -243,19 +242,6 @@ static wxSize GetBmpSize(wxBitmap & bmp)
 #endif
 }

-// The x-range [first, second) of the column at the right of the rows that holds the items' action
-// icons, empty when no item has one. render() draws the icons in it and mouseReleased() hit-tests
-// clicks against it, so the drawn icon and its clickable area always match.
-std::pair<int, int> DropDown::actionColumn() const
-{
-    if (actionIconWidth <= 0)
-        return {0, 0};
-    int right = rowSize.x;
-    if (rowSize.y * count > GetSize().y) // position bar
-        right -= 6;
-    return {right - actionIconWidth - FromDIP(16), right};
-}
-
 static void _DrawSplitItem(const wxWindow* w, wxDC& dc, wxString split_text, wxPoint start_pt, int item_width, int item_height)
 {
    // save dc
@@ -385,10 +371,6 @@ void DropDown::render(wxDC &dc)
        rcContent.width -= szBmp.x + 5;
    }

-    const auto action_column = actionColumn();
-    if (action_column.second > action_column.first)
-        rcContent.width = action_column.first - rcContent.x;
-
    std::set<wxString> groups;
    // draw texts & icons
    int index = 0;
@@ -452,24 +434,13 @@ void DropDown::render(wxDC &dc)
        auto text = group.IsEmpty()
                        ? (item.group_key.IsEmpty() ? item.text : item.group_label)
                        : item.text;
-        if (item.action_icon.IsOk()) {
-            auto action_size = GetBmpSize(item.action_icon);
-            wxPoint action_pt(action_column.second - action_size.x - FromDIP(8),
-                              rcContent.y + (rcContent.height - action_size.y) / 2);
-            dc.DrawBitmap(item.action_icon, action_pt);
-        }
-
        if (!text_off && !text.IsEmpty()) {
            wxSize tSize = dc.GetMultiLineTextExtent(text);
            if (pt.x + tSize.x > rcContent.GetRight()) {
-                int max_text_width = rcContent.GetRight() - pt.x;
-                if (max_text_width <= 0) {
-                    text.clear();
-                } else {
-                    if (is_hover && item.tip.IsEmpty())
-                        SetToolTip(text);
-                    text = wxControl::Ellipsize(text, dc, wxELLIPSIZE_END, max_text_width);
-                }
+                if (is_hover && item.tip.IsEmpty())
+                    SetToolTip(text);
+                text = wxControl::Ellipsize(text, dc, wxELLIPSIZE_END,
+                                            rcContent.GetRight() - pt.x);
            }
            pt.y += (rcContent.height - textSize.y) / 2;
            dc.SetFont(GetFont());
@@ -558,7 +529,6 @@ void DropDown::messureSize()
    if (!need_sync) return;
    textSize = wxSize();
    iconSize = wxSize();
-    actionIconWidth = 0;
    count = 0;
    wxClientDC dc(GetParent() ? GetParent() : this);
    dc.SetFont(GetFont());
@@ -595,13 +565,8 @@ void DropDown::messureSize()
                size1.x += size2.x + (text_off ? 0 : 5);
            }
        }
-        if (item.action_icon.IsOk())
-            actionIconWidth = std::max(actionIconWidth, GetBmpSize(item.action_icon).x);
        if (size1.x > textSize.x) textSize = size1;
    }
-    // Every row leaves room for the action column, as render() and actionColumn() lay it out.
-    if (actionIconWidth > 0)
-        textSize.x += actionIconWidth + FromDIP(16);
    if (!align_icon) iconSize.x = 0;
    wxSize szContent = textSize;
    if (szContent.x < FromDIP(120) && !use_content_width)
@@ -671,11 +636,6 @@ void DropDown::messureSize()
            e.SetId(GetId());
            GetEventHandler()->ProcessEvent(e);
        });
-        subDropDown->Bind(EVT_DROPDOWN_ITEM_ACTION, [this](wxCommandEvent &e) {
-            e.SetEventObject(this);
-            e.SetId(GetId());
-            GetEventHandler()->ProcessEvent(e);
-        });
    }
    need_sync = false;
 }
@@ -754,15 +714,6 @@ void DropDown::mouseReleased(wxMouseEvent& event)
        if (hover_item < 0)
            return;
        if (hover_item >= 0 && (subDropDown == nullptr || subDropDown->group.empty())) { // not moved
-            int index = hoverIndex();
-            if (index >= 0 && items[index].action_icon.IsOk()) {
-                const auto action_column = actionColumn();
-                if (event.GetX() >= action_column.first && event.GetX() < action_column.second) {
-                    sendDropDownActionEvent(index);
-                    paintNow();
-                    return;
-                }
-            }
            sendDropDownEvent();
            if (mainDropDown)
                mainDropDown->hover_item = -1; // To Dismiss mainDropDown
@@ -879,17 +830,6 @@ void DropDown::sendDropDownEvent()
    GetEventHandler()->ProcessEvent(event);
 }

-void DropDown::sendDropDownActionEvent(int index)
-{
-    if (index < 0 || index >= int(items.size()) || (items[index].style & DD_ITEM_STYLE_DISABLED))
-        return;
-    wxCommandEvent event(EVT_DROPDOWN_ITEM_ACTION, GetId());
-    event.SetEventObject(this);
-    event.SetInt(index);
-    event.SetString(items[index].text);
-    GetEventHandler()->ProcessEvent(event);
-}
-
 void DropDown::Dismiss()
 {
    if (subDropDown && subDropDown->IsShown())
@@ -5,7 +5,6 @@
 #include <wx/event.h>
 #include <vector>
 #include <cstddef>
-#include <utility>
 #include <wx/gdicmn.h>
 #include "slic3r/GUI/Widgets/StateColor.hpp"
 #include <boost/date_time/posix_time/ptime.hpp>
@@ -28,7 +27,6 @@ class wxWindow;
 #define DD_ITEM_STYLE_DIMMED      0x0004 // gray text, but still selectable

 wxDECLARE_EVENT(EVT_DISMISS, wxCommandEvent);
-wxDECLARE_EVENT(EVT_DROPDOWN_ITEM_ACTION, wxCommandEvent);

 class DropDown : public PopupWindow
 {
@@ -39,7 +37,6 @@ public:
        wxString text_static_tips;// display static tips for TextInput.eg.PrinterInfoBox
        wxBitmap icon;
        wxBitmap icon_textctrl;// display icon for TextInput.eg.PrinterInfoBox
-        wxBitmap action_icon;
        void *   data{nullptr};
        wxString group_key{};
        wxString group_label{};
@@ -68,7 +65,6 @@ private:

    wxSize textSize;
    wxSize iconSize;
-    int    actionIconWidth = 0;
    wxSize rowSize;

    StateHandler state_handler;
@@ -139,7 +135,6 @@ private:
    int hoverIndex();

    int selectedItem();
-    std::pair<int, int> actionColumn() const;

    friend class ComboBox;
    void messureSize();
@@ -153,7 +148,6 @@ private:
    void mouseWheelMoved(wxMouseEvent &event);

    void sendDropDownEvent();
-    void sendDropDownActionEvent(int index);


    DECLARE_EVENT_TABLE()
@@ -69,6 +69,10 @@ webkit_web_view_run_javascript_finish                (WebKitWebView
 						      GError                    **error);
 WEBKIT_API void
 webkit_javascript_result_unref              (WebKitJavascriptResult *js_result);
+WEBKIT_API guint
+webkit_get_major_version                     (void);
+WEBKIT_API guint
+webkit_get_minor_version                     (void);
 }
 #endif

@@ -401,6 +405,29 @@ bool WebView::NeedsRecreateOnShow()
    return false;
 #endif
 }
+
+bool WebView::NeedsCompositingWorkaround()
+{
+#ifdef __linux__
+    const guint major = webkit_get_major_version();
+    const guint minor = webkit_get_minor_version();
+    return major < 2 || (major == 2 && minor < 42);
+#else
+    return false;
+#endif
+}
+
+bool WebView::SupportsForceSharedMemory()
+{
+#ifdef __linux__
+    const guint major = webkit_get_major_version();
+    const guint minor = webkit_get_minor_version();
+    return major > 2 || (major == 2 && minor >= 44);
+#else
+    return false;
+#endif
+}
+
 #if wxUSE_WEBVIEW_EDGE
 bool WebView::CheckWebViewRuntime()
 {
@@ -30,6 +30,16 @@ public:
    // ignoring every navigation. A panel that gets true here recreates its view on first Show().
    static bool NeedsRecreateOnShow();

+    // True when the linked WebKitGTK predates 2.42, where accelerated compositing
+    // could fail silently on XWayland sessions, so it is forced off as a fallback.
+    // False on every other platform. Safe to call before GTK initialises.
+    static bool NeedsCompositingWorkaround();
+
+    // True when the linked WebKitGTK is new enough (>= 2.44) to honour
+    // WEBKIT_DMABUF_RENDERER_FORCE_SHM, the shared-memory transport switch.
+    // False on every other platform. Safe to call before GTK initialises.
+    static bool SupportsForceSharedMemory();
+
    static void RecreateAll();
 };

@@ -2043,40 +2043,3 @@ TEST_CASE("3MF XML entries declaring more than an int can hold fail to load", "[
        CHECK_FALSE(parser.check_3mf_from_prusa(path));
    }
 }
-
-TEST_CASE("Loading a gcode.3mf from a stream keeps the plate's pick and pattern file paths", "[3mf][Regression]")
-{
-    Model model;
-    REQUIRE(load_stl((std::string(TEST_DATA_DIR) + "/test_3mf/Prusa.stl").c_str(), &model));
-    model.add_default_instances();
-    ScopedTemporaryDir backup_dir("orca_pick");
-    model.set_backup_path(backup_dir.string());
-    DynamicPrintConfig config = DynamicPrintConfig::full_print_config();
-
-    auto plate = std::make_unique<PlateData>();
-    plate->plate_index       = 0;
-    plate->pick_file         = (backup_dir.path() / "pick.png").string();
-    plate->pattern_bbox_file = (backup_dir.path() / "plate.json").string();
-
-    ScopedTemporaryFile temp(".3mf");
-    const std::string   test_file = temp.string();
-    StoreParams store_params;
-    store_params.path   = test_file.c_str();
-    store_params.model  = &model;
-    store_params.config = &config;
-    store_params.plate_data_list.push_back(plate.get());
-    store_params.strategy = SaveStrategy::Zip64 | SaveStrategy::Silence;
-    REQUIRE(store_bbs_3mf(store_params));
-
-    boost::nowide::ifstream in(test_file, std::ios::binary);
-    Model              dst_model;
-    DynamicPrintConfig dst_config;
-    PlateDataPtrs      dst_plates;
-    Semver             file_version;
-    dst_model.set_backup_path(backup_dir.string());
-    REQUIRE(load_gcode_3mf_from_stream(in, &dst_config, &dst_model, &dst_plates, &file_version));
-    REQUIRE(dst_plates.size() == 1);
-    CHECK(dst_plates.front()->pick_file == "Metadata/pick_1.png");
-    CHECK(dst_plates.front()->pattern_bbox_file == "Metadata/plate_1.json");
-    release_PlateData_list(dst_plates);
-}
Author	SHA1	Message	Date
Lam Wei Lun	2b736dd268	Flatpak: drop the WebKit NVIDIA export; the binary owns the workaround /proc/driver/nvidia/version is readable inside the Flatpak sandbox, so the binary's NVIDIA branch already sets WEBKIT_DMABUF_RENDERER_FORCE_SHM with the correct runtime gate and the entrypoint's own export is redundant. Verified with: flatpak run --command=cat com.orcaslicer.OrcaSlicer /proc/driver/nvidia/version which prints the NVRM version (driver 615.71.09) from inside the sandbox.	2026-10-12 15:49:58 +08:00
Lam Wei Lun	5dba611eac	Flatpak: force WebKit's shared-memory transport instead of disabling DMABUF The entrypoint exported WEBKIT_DISABLE_DMABUF_RENDERER=1 for NVIDIA. WebKit reads that variable first and leaves the transport set empty, which turns accelerated compositing off, so the Device tab still lagged for NVIDIA Flatpak users, and the binary could not override it because its setenv is non-replacing. The runtime's WebKitGTK is vanilla, so there is no distro isNVIDIA() guard to clear and WEBKIT_DMABUF_RENDERER_FORCE_SHM=1 alone is the right switch: compositing stays on and only the hardware DMABUF path is skipped.	2026-10-12 15:06:30 +08:00
Lam Wei Lun	2feb5f0f9d	Linux: drop the AppImage WebKit DMABUF exports; correct the skill notes The launcher cannot gate on the runtime WebKitGTK version, so exporting WEBKIT_DMABUF_RENDERER_FORCE_SHM/WEBKIT_FORCE_DMABUF_RENDERER there would clear a distro isNVIDIA() guard on hosts older than 2.44, where FORCE_SHM is ignored, re-exposing the broken hardware path. The binary already sets both with the correct gate, so remove them and say who owns the workaround. Also correct two claims in the skill reference. An empty transport set only means "no accelerated compositing" from 2.44 on; 2.42/2.43 still fall back to the Wayland/X11 renderers, removed in the same release that added FORCE_SHM. And threaded scrolling is off by default in 2.44/2.45 (on from 2.46), so FORCE_SHM keeps compositing rather than scrolling. Document the module-level detection cost and the WEBKIT_DMABUF_RENDERER_FORCE_SHM=0 opt-out.	2026-10-12 13:07:02 +08:00
Lam Wei Lun	9c164ca597	Linux: use WebKit's shared-memory transport for the NVIDIA DMABUF renderer The Device tab web view is slow on NVIDIA proprietary drivers even with accelerated compositing left on: since the DMABUF renderer became the default in WebKitGTK 2.42, the driver cannot back it, and web views fall back to a slow path. Gating the old WEBKIT_DISABLE_COMPOSITING_MODE fallback on WebKit < 2.42 is the wrong axis, because the failure is version-independent from 2.42 on. Force the shared-memory transport with WEBKIT_DMABUF_RENDERER_FORCE_SHM=1. That keeps compositing and threaded scrolling and skips only the hardware path. Also set WEBKIT_FORCE_DMABUF_RENDERER=1, which clears the isNVIDIA() early return that Debian/Ubuntu/openSUSE patch into rendererBufferTransportMode() and which otherwise returns before the FORCE_SHM check is reached. Both are set before the X11-vs-Wayland split so the workaround also covers XWayland, and only when WebKitGTK is new enough to honour FORCE_SHM (>= 2.44, WebView::SupportsForceSharedMemory()). The AppImage launcher exported the superseded WEBKIT_DISABLE_DMABUF_RENDERER=1, which is read first, leaves the transport set empty and so disables compositing outright; replace it with the same pair. The wxWidgets skill reference is updated to match.	2026-10-12 13:02:10 +08:00
Lam Wei Lun	00bccf9b2d	Linux: only disable WebKit compositing for WebKitGTK older than 2.42 The default Wayland path set WEBKIT_DISABLE_COMPOSITING_MODE=1 whenever the session had both DISPLAY and WAYLAND_DISPLAY, i.e. any Wayland session with XWayland. That forces WebKitGTK accelerated compositing off and also disables threaded scrolling, so the Device tab web view (Mainsail/Fluidd) lagged unless the app was launched with GDK_BACKEND=x11, the only path that skipped the variable. Disabling compositing also turns off threaded scrolling. The XWayland compositing bug the fallback worked around is fixed in WebKitGTK >= 2.42, so apply it only for older WebKit. WebView::NeedsCompositingWorkaround() reads the runtime WebKitGTK version; the X11 opt-in path is unchanged. Behavior is unchanged on WebKit < 2.42, on pure X11, and on native Wayland without XWayland. The wxWidgets skill reference is updated to match.	2026-10-12 11:46:31 +08:00