Fix texture projection UV orientation

An image laid onto a model came out upside down under the ordinary box
(tri-planar) projection, and on three of a cube's six faces it was also
mirrored left to right, which reads as a 180 degree rotation.

DecodedHeightTexture::sample() defines v = 0 as the height map's first
pixel row, i.e. its top. Every projection built v from world +Z, so v
grew upward and the image landed bottom row up. The one path that was
already right is the projective "project from view" matrix, which
measures window y downward.

Both halves of the box basis were wrong:

- v is now negated on all three world planes, so the top of an image
  sits at the top of the model.
- u now carries a sign for the side of the plane the face is on, chosen
  so that u x v == -normal. Without it the two faces sharing a plane get
  one u and one of them is mirrored. The sign flips exactly where that
  plane's blend weight (the fourth power of a normal component) reaches
  zero, so the blended tri-planar sum stays continuous and the hard axis
  switch the old code removed does not come back.

The same v convention was missing from the other mapping modes:
cylindrical (which also had a left handed frame, right x up rather than
up x right, so its wrap ran mirrored), spherical, the affine branch of
view projection, and the flat chart fallback of the LSCM unwrap, which
now reuses the box basis so a cube face unwraps to the orientation
tri-planar would have given it.

The basis table is exported as box_projection_axes() and the gizmo's
adjust_tangent_basis() calls it instead of restating it, so the
placement ring and offset handle cannot drift from the bake. All four
preview shaders get the matching change, including projection_axes(),
whose tangent and bitangent have to flip with the coordinate or the
relief shading inverts.

Re-baking an existing project now places its texture upright, so it will
differ from how it looked before. Geometry already baked into a 3mf is
untouched, so nothing changes until the user re-bakes.

Verified by measuring the sampled texture row and column against world
position for every mapping mode on all six faces of a cube, and by a
full bake of a quadrant coded image, which lands each quadrant within
1e-3 mm of its expected depth.

.github/workflows/build_all.yml

@@ -7,6 +7,7 @@ on:
      - release/*
     paths:
      - 'deps/**'
+     - 'deps_src/**'
      - 'src/**'
      - '**/CMakeLists.txt'
      - 'version.inc'
@@ -14,8 +15,10 @@ on:
      - 'resources/**'
      - ".github/workflows/build_*.yml"
      - ".github/workflows/unit_tests*.yml"
+     - 'build_linux.sh'
      - 'build_win.bat'
      - 'scripts/test_build_win.ps1'
+     - 'build_release_macos.sh'
      - 'scripts/build_preset_cache.*'
      - 'scripts/flatpak/**'
      - 'scripts/msix/**'
@@ -54,7 +57,9 @@ on:
         default: false
 
 concurrency:
-  group: ${{ github.workflow }}-${{ github.event_name }}-${{ github.event.pull_request.number || github.ref }}
+  # cancel_closed_pr_builds.yml joins this group by name, so update that file
+  # with any change here.
+  group: build-all-${{ github.event_name }}-${{ github.event.pull_request.number || github.ref }}
   # Pushes don't cancel a running build, because only a finished branch build
   # saves caches every pull request can restore.
   cancel-in-progress: ${{ github.event_name == 'pull_request' }}

.github/workflows/build_check_cache.yml

@@ -1,73 +1,198 @@
-name: Check Cache
-
-on:
-  workflow_call:
-    inputs:
-      os:
-        required: true
-        type: string
-      arch:
-        required: false
-        type: string
-      compiler:
-        required: false
-        type: string
-        default: msvc
-      build-deps-only:
-        required: false
-        type: boolean
-      force-build:
-        required: false
-        type: boolean
-  
-jobs:
-  check_cache: # determines if there is a cache and outputs variables used in caching process
-    name: Check Cache
-    runs-on: ${{ inputs.os }}
-    outputs:
-      cache-key: ${{ steps.set_outputs.outputs.cache-key }}
-      cache-path: ${{ steps.set_outputs.outputs.cache-path }}
-      valid-cache: ${{ steps.cache_deps.outputs.cache-hit }}
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v7
-        with:
-          lfs: 'false'
-        
-      - name: set outputs
-        id: set_outputs
-        env:
-          # Anything that changes how the tree is built belongs in the key, or a job
-          # restores one it cannot use. Linux amd64 passes no arch deliberately, so
-          # 'linux-clang' keeps the cache it already has.
-          cache-os: ${{ runner.os == 'macOS' && format('{0}-{1}', inputs.os, inputs.arch) || (runner.os == 'Windows' && format('windows-{0}-{1}', inputs.arch, inputs.compiler) || format('linux-clang{0}', inputs.arch && format('-{0}', inputs.arch) || '')) }}
-          # The Windows ARM64 deps build in build-arm64, all others under build;
-          # build_deps.yml and build_orca.yml pass the Windows directory to build_win.bat.
-          dep-folder-name: ${{ runner.os == 'macOS' && format('/{0}', inputs.arch) || (runner.os == 'Windows' && inputs.arch == 'arm64') && '-arm64/OrcaSlicer_dep' || '/OrcaSlicer_dep' }}
-          output-cmd: ${{ runner.os == 'Windows' && '$env:GITHUB_OUTPUT' || '"$GITHUB_OUTPUT"'}}
-        run: |
-          echo cache-key=${{ env.cache-os }}-cache-orcaslicer_deps-build-${{ hashFiles('deps/**') }} >> ${{ env.output-cmd }}
-          echo cache-path=${{ github.workspace }}/deps/build${{ env.dep-folder-name }} >> ${{ env.output-cmd }}
-            
-      - name: load cache
-        id: cache_deps
-        uses: actions/cache@v6
-        with:
-          path: ${{ steps.set_outputs.outputs.cache-path }}
-          key: ${{ steps.set_outputs.outputs.cache-key }}
-          lookup-only: true
-        
-  build_deps: # call next step
-    name: Build Deps
-    needs: [check_cache]
-    uses: ./.github/workflows/build_deps.yml
-    with:
-      cache-key: ${{ needs.check_cache.outputs.cache-key }}
-      cache-path: ${{ needs.check_cache.outputs.cache-path }}
-      valid-cache: ${{ needs.check_cache.outputs.valid-cache == 'true' }}
-      os: ${{ inputs.os }}
-      arch: ${{ inputs.arch }}
-      compiler: ${{ inputs.compiler }}
-      build-deps-only: ${{ inputs.build-deps-only }}
-      force-build: ${{ inputs.force-build }}
-    secrets: inherit
+name: Check Cache
+
+on:
+  workflow_call:
+    inputs:
+      os:
+        required: true
+        type: string
+      arch:
+        required: false
+        type: string
+      compiler:
+        required: false
+        type: string
+        default: msvc
+      build-deps-only:
+        required: false
+        type: boolean
+      force-build:
+        required: false
+        type: boolean
+  
+# Read by scripts/ci_deps_cache.sh.
+env:
+  REPO: ${{ github.repository }}
+  WORKFLOW_REF: ${{ github.workflow_ref }}
+  BASE_REF: ${{ github.base_ref }}
+
+jobs:
+  check_cache: # determines if there is a cache and outputs variables used in caching process
+    name: Check Cache
+    # Hosted macOS runners are scarce, so their lookup runs on Linux.
+    runs-on: ${{ startsWith(inputs.os, 'macos-') && 'ubuntu-24.04' || inputs.os }}
+    outputs:
+      cache-key: ${{ steps.set_outputs.outputs.cache-key }}
+      cache-path: ${{ steps.set_outputs.outputs.cache-path }}
+      valid-cache: ${{ steps.cache_deps.outputs.cache-hit }}
+      macos-path: ${{ steps.macos_path.outputs.path }}
+      key-inputs: ${{ steps.wait_check.outputs.key-inputs }}
+      wait-for: ${{ steps.wait_check.outputs.wait-for }}
+      wait-since: ${{ steps.wait_check.outputs.wait-since }}
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v7
+        with:
+          lfs: 'false'
+          # The wait check compares the merge commit with its first parent.
+          fetch-depth: ${{ startsWith(inputs.os, 'macos-') && 2 || 1 }}
+          # Fetches only deps/, which the key hashes, and the wait script.
+          sparse-checkout: |
+            /deps/
+            /scripts/ci_deps_cache.sh
+          sparse-checkout-cone-mode: false
+        
+      - name: set outputs
+        id: set_outputs
+        env:
+          # Anything that changes how the tree is built belongs in the key, or a job
+          # restores one it cannot use. Linux amd64 passes no arch deliberately, so
+          # 'linux-clang' keeps the cache it already has.
+          cache-os: ${{ (runner.os == 'macOS' || startsWith(inputs.os, 'macos-')) && format('{0}-{1}', inputs.os, inputs.arch) || (runner.os == 'Windows' && format('windows-{0}-{1}', inputs.arch, inputs.compiler) || format('linux-clang{0}', inputs.arch && format('-{0}', inputs.arch) || '')) }}
+          # The Windows ARM64 deps build in build-arm64, all others under build;
+          # build_deps.yml and build_orca.yml pass the Windows directory to build_win.bat.
+          dep-folder-name: ${{ (runner.os == 'macOS' || startsWith(inputs.os, 'macos-')) && format('/{0}', inputs.arch) || (runner.os == 'Windows' && inputs.arch == 'arm64') && '-arm64/OrcaSlicer_dep' || '/OrcaSlicer_dep' }}
+          output-cmd: ${{ runner.os == 'Windows' && '$env:GITHUB_OUTPUT' || '"$GITHUB_OUTPUT"'}}
+        run: |
+          echo cache-key=${{ env.cache-os }}-cache-orcaslicer_deps-build-${{ hashFiles('deps/**') }} >> ${{ env.output-cmd }}
+          # Relative to the workspace, which differs from the build's when this job runs on Linux.
+          echo cache-path=deps/build${{ env.dep-folder-name }} >> ${{ env.output-cmd }}
+            
+      # actions/cache matches the path too, so a Linux lookup for macOS uses the
+      # workspace of a hosted macOS job.
+      - name: macOS cache path
+        id: macos_path
+        if: ${{ startsWith(inputs.os, 'macos-') }}
+        run: echo "path=/Users/runner/work/${GITHUB_REPOSITORY#*/}/${GITHUB_REPOSITORY#*/}/${{ steps.set_outputs.outputs.cache-path }}" >> "$GITHUB_OUTPUT"
+
+      - name: load cache
+        id: cache_deps
+        uses: actions/cache@v6
+        with:
+          path: ${{ steps.macos_path.outputs.path || format('{0}/{1}', github.workspace, steps.set_outputs.outputs.cache-path) }}
+          key: ${{ steps.set_outputs.outputs.cache-key }}
+          lookup-only: true
+        
+      # A pull request that misses the cache can wait for a base branch build of the same deps.
+      - name: check for a base branch build to wait for
+        id: wait_check
+        if: ${{ startsWith(inputs.os, 'macos-') && github.event_name == 'pull_request' && steps.cache_deps.outputs.cache-hit != 'true' }}
+        env:
+          GH_TOKEN: ${{ github.token }}
+        run: bash scripts/ci_deps_cache.sh check
+
+  wait_for_deps:
+    name: Wait for base branch deps
+    needs: [check_cache]
+    if: ${{ needs.check_cache.outputs.wait-for != '' }}
+    runs-on: ubuntu-24.04
+    env:
+      WAIT_MINUTES: 120
+    # Must exceed WAIT_MINUTES.
+    timeout-minutes: 130
+    # Waiting runs queue here, and only the first one holds a runner.
+    concurrency:
+      group: deps-wait-${{ github.base_ref }}-${{ needs.check_cache.outputs.cache-key }}
+      queue: max
+    outputs:
+      hit: ${{ steps.lookup.outputs.cache-hit }}
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v7
+        with:
+          sparse-checkout: scripts/ci_deps_cache.sh
+          sparse-checkout-cone-mode: false
+
+      - name: wait for the deps cache
+        env:
+          GH_TOKEN: ${{ github.token }}
+          KEY: ${{ needs.check_cache.outputs.cache-key }}
+          KEY_INPUTS: ${{ needs.check_cache.outputs.key-inputs }}
+          WAIT_FOR: ${{ needs.check_cache.outputs.wait-for }}
+          WAIT_SINCE: ${{ needs.check_cache.outputs.wait-since }}
+          ARCH: ${{ inputs.arch }}
+        run: bash scripts/ci_deps_cache.sh wait
+
+      - name: load cache
+        id: lookup
+        uses: actions/cache@v6
+        with:
+          path: ${{ needs.check_cache.outputs.macos-path }}
+          key: ${{ needs.check_cache.outputs.cache-key }}
+          lookup-only: true
+
+  # Hosted macOS runners are scarce, so a pull request's macOS build waits until
+  # one is free that push and nightly builds do not need. See the script.
+  macos_admission:
+    name: Wait for a macOS runner
+    needs: [check_cache, wait_for_deps]
+    if: ${{ !cancelled() && needs.check_cache.result == 'success' && startsWith(inputs.os, 'macos-') && github.event_name == 'pull_request' && !contains(github.event.pull_request.labels.*.name, 'macos-priority') }}
+    runs-on: ubuntu-24.04
+    env:
+      WAIT_MINUTES: 240
+      PRIORITY: false
+    # Must exceed WAIT_MINUTES.
+    timeout-minutes: 250
+    # One line for every arch of every pull request, and only its first job polls.
+    concurrency:
+      group: macos-admission
+      queue: max
+    steps: &macos_admission_steps
+      - name: Checkout
+        uses: actions/checkout@v7
+        with:
+          sparse-checkout: scripts/ci_macos_admission.py
+          sparse-checkout-cone-mode: false
+
+      - name: wait for a macOS runner
+        env:
+          GH_TOKEN: ${{ github.token }}
+          MACOS_RUNNER_LIMIT: ${{ vars.MACOS_RUNNER_LIMIT }}
+        # -u, or the log shows nothing until the wait ends.
+        run: python3 -u scripts/ci_macos_admission.py
+
+  # The macos-priority label, when the run starts, puts a pull request in its own
+  # line, which the normal one yields to. The names are fixed, because a skipped
+  # job is listed under its unevaluated name, and the script matches both.
+  macos_admission_priority:
+    name: Wait for a macOS runner (priority)
+    needs: [check_cache, wait_for_deps]
+    if: ${{ !cancelled() && needs.check_cache.result == 'success' && startsWith(inputs.os, 'macos-') && github.event_name == 'pull_request' && contains(github.event.pull_request.labels.*.name, 'macos-priority') }}
+    runs-on: ubuntu-24.04
+    env:
+      WAIT_MINUTES: 240
+      PRIORITY: true
+    # Must exceed WAIT_MINUTES.
+    timeout-minutes: 250
+    concurrency:
+      group: macos-admission-priority
+      queue: max
+    steps: *macos_admission_steps
+
+  build_deps: # call next step
+    name: Build Deps
+    needs: [check_cache, wait_for_deps, macos_admission, macos_admission_priority]
+    # A failed wait counts as no cache, so the deps are built here. A failed
+    # admission still builds rather than skip macOS.
+    if: ${{ !cancelled() && needs.check_cache.result == 'success' }}
+    uses: ./.github/workflows/build_deps.yml
+    with:
+      cache-key: ${{ needs.check_cache.outputs.cache-key }}
+      cache-path: ${{ needs.check_cache.outputs.cache-path }}
+      valid-cache: ${{ needs.check_cache.outputs.valid-cache == 'true' || needs.wait_for_deps.outputs.hit == 'true' }}
+      os: ${{ inputs.os }}
+      arch: ${{ inputs.arch }}
+      compiler: ${{ inputs.compiler }}
+      build-deps-only: ${{ inputs.build-deps-only }}
+      force-build: ${{ inputs.force-build }}
+    secrets: inherit

.github/workflows/build_deps.yml

@@ -45,7 +45,7 @@ jobs:
       - name: load cached deps
         uses: actions/cache@v6
         with:
-          path: ${{ inputs.cache-path }}
+          path: ${{ github.workspace }}/${{ inputs.cache-path }}
           key: ${{ inputs.cache-key }}
 
       - uses: lukka/get-cmake@latest
@@ -122,7 +122,7 @@ jobs:
               choco install strawberryperl
             }
             # cache-path is the install directory inside the deps build directory.
-            $deps = (Split-Path "${{ inputs.cache-path }}").Replace('\', '/')
+            $deps = (Split-Path "${{ github.workspace }}/${{ inputs.cache-path }}").Replace('\', '/')
             # -l compiles with Visual Studio's clang-cl and -x builds with Ninja; --msvc --msbuild is cl under the Visual Studio generator.
             $flags = if ("${{ inputs.compiler }}" -eq "clang") { "-l", "-x" } else { "--msvc", "--msbuild" }
             .\build_win.bat -d --arch ${{ inputs.arch }} --deps-dir $deps @flags

.github/workflows/build_orca.yml

@@ -44,7 +44,7 @@ jobs:
         if: ${{ !(runner.os == 'macOS' && inputs.macos-combine-only) }}
         uses: actions/cache@v6
         with:
-          path: ${{ inputs.cache-path }}
+          path: ${{ github.workspace }}/${{ inputs.cache-path }}
           key: ${{ inputs.cache-key }}
           fail-on-cache-miss: true
 
@@ -467,7 +467,7 @@ jobs:
         # --tests builds the unit tests too; the unit_tests_windows_* jobs run them.
         run: |
           # cache-path is the install directory inside the deps build directory.
-          $deps = (Split-Path "${{ inputs.cache-path }}").Replace('\', '/')
+          $deps = (Split-Path "${{ github.workspace }}/${{ inputs.cache-path }}").Replace('\', '/')
           # -l compiles with Visual Studio's clang-cl and -x builds with Ninja; --msvc --msbuild is cl under the Visual Studio generator.
           $flags = if ("${{ inputs.compiler }}" -eq "clang") { "-l", "-x" } else { "--msvc", "--msbuild" }
           .\build_win.bat -s --tests -i --arch ${{ inputs.arch }} --build-dir $env:BUILD_DIR --deps-dir $deps @flags

.github/workflows/cancel_closed_pr_builds.yml

@@ -0,0 +1,21 @@
+name: Cancel builds of closed pull requests
+
+on:
+  # pull_request_target needs no approval for first-time contributors and must never
+  # check out pull request code.
+  pull_request_target:
+    types:
+      - closed
+
+permissions: {}
+
+jobs:
+  cancel:
+    # Matches the concurrency group in build_all.yml, so joining it cancels the pull
+    # request's unfinished Build all run.
+    concurrency:
+      group: build-all-pull_request-${{ github.event.pull_request.number }}
+      cancel-in-progress: true
+    runs-on: ubuntu-latest
+    steps:
+      - run: echo "Joined concurrency group build-all-pull_request-${{ github.event.pull_request.number }}."

localization/i18n/zh_CN/OrcaSlicer_zh_CN.po

@@ -7478,7 +7478,7 @@ msgid "Update"
 msgstr "更新"
 
 msgid "Assistant(HMS)"
-msgstr "助理（HMS）"
+msgstr "助手(HMS)"
 
 #, c-format, boost-format
 msgid "Network plug-in v%s"

resources/profiles/FELIX Printers.json

@@ -0,0 +1,790 @@
+{
+	"name": "FELIX Printers",
+	"version": "1.0.0",
+	"force_update": "0",
+	"description": "Configuration file for printers by FELIX Printers",
+	"machine_model_list": [
+		{
+			"name": "FELIX Food Double",
+			"sub_path": "machine/FELIX Food Double.json"
+		},
+		{
+			"name": "FELIX Food Single",
+			"sub_path": "machine/FELIX Food Single.json"
+		},
+		{
+			"name": "FELIX Food Switch",
+			"sub_path": "machine/FELIX Food Switch.json"
+		},
+		{
+			"name": "FELIX Pro 3",
+			"sub_path": "machine/FELIX Pro 3.json"
+		},
+		{
+			"name": "FELIX Pro L 3.0",
+			"sub_path": "machine/FELIX Pro L 3.0.json"
+		},
+		{
+			"name": "FELIX Pro XL 3.0",
+			"sub_path": "machine/FELIX Pro XL 3.0.json"
+		},
+		{
+			"name": "FELIX Tec 4",
+			"sub_path": "machine/FELIX Tec 4.json"
+		}
+	],
+	"machine_list": [
+		{
+			"name": "fdm_all_machines_common",
+			"sub_path": "machine/fdm_all_machines_common.json"
+		},
+		{
+			"name": "fdm_felix_food_common",
+			"sub_path": "machine/fdm_felix_food_common.json"
+		},
+		{
+			"name": "fdm_felix_food_double_common",
+			"sub_path": "machine/fdm_felix_food_double_common.json"
+		},
+		{
+			"name": "fdm_felix_food_switch_common",
+			"sub_path": "machine/fdm_felix_food_switch_common.json"
+		},
+		{
+			"name": "fdm_felix_plastic_common",
+			"sub_path": "machine/fdm_felix_plastic_common.json"
+		},
+		{
+			"name": "fdm_felix_pro_3_common",
+			"sub_path": "machine/fdm_felix_pro_3_common.json"
+		},
+		{
+			"name": "fdm_felix_pro_l_3_common",
+			"sub_path": "machine/fdm_felix_pro_l_3.json"
+		},
+		{
+			"name": "fdm_felix_pro_xl_3_common",
+			"sub_path": "machine/fdm_felix_pro_xl_3_common.json"
+		},
+		{
+			"name": "fdm_felix_tec_common",
+			"sub_path": "machine/fdm_felix_tec_common.json"
+		},
+		{
+			"name": "FELIX Food Single 0.50mm nozzle",
+			"sub_path": "machine/FELIX Food Single 0.50mm nozzle.json"
+		},
+		{
+			"name": "FELIX Food Single 1.00mm nozzle",
+			"sub_path": "machine/FELIX Food Single 1.00mm nozzle.json"
+		},
+		{
+			"name": "FELIX Food Single 2.00mm nozzle",
+			"sub_path": "machine/FELIX Food Single 2.00mm nozzle.json"
+		},
+		{
+			"name": "FELIX Food Single 3.00mm nozzle",
+			"sub_path": "machine/FELIX Food Single 3.00mm nozzle.json"
+		},
+		{
+			"name": "FELIX Food Single 4.00mm nozzle",
+			"sub_path": "machine/FELIX Food Single 4.00mm nozzle.json"
+		},
+		{
+			"name": "FELIX Food Double 0.50mm nozzle",
+			"sub_path": "machine/FELIX Food Double 0.50mm nozzle.json"
+		},
+		{
+			"name": "FELIX Food Double 1.00mm nozzle",
+			"sub_path": "machine/FELIX Food Double 1.00mm nozzle.json"
+		},
+		{
+			"name": "FELIX Food Double 2.00mm nozzle",
+			"sub_path": "machine/FELIX Food Double 2.00mm nozzle.json"
+		},
+		{
+			"name": "FELIX Food Double 3.00mm nozzle",
+			"sub_path": "machine/FELIX Food Double 3.00mm nozzle.json"
+		},
+		{
+			"name": "FELIX Food Double 4.00mm nozzle",
+			"sub_path": "machine/FELIX Food Double 4.00mm nozzle.json"
+		},
+		{
+			"name": "FELIX Food Switch 0.50mm nozzle",
+			"sub_path": "machine/FELIX Food Switch 0.50mm nozzle.json"
+		},
+		{
+			"name": "FELIX Food Switch 1.00mm nozzle",
+			"sub_path": "machine/FELIX Food Switch 1.00mm nozzle.json"
+		},
+		{
+			"name": "FELIX Food Switch 2.00mm nozzle",
+			"sub_path": "machine/FELIX Food Switch 2.00mm nozzle.json"
+		},
+		{
+			"name": "FELIX Food Switch 3.00mm nozzle",
+			"sub_path": "machine/FELIX Food Switch 3.00mm nozzle.json"
+		},
+		{
+			"name": "FELIX Food Switch 4.00mm nozzle",
+			"sub_path": "machine/FELIX Food Switch 4.00mm nozzle.json"
+		},
+		{
+			"name": "FELIX Pro 3 0.25mm nozzle",
+			"sub_path": "machine/FELIX Pro 3 0.25mm nozzle.json"
+		},
+		{
+			"name": "FELIX Pro 3 0.35mm nozzle",
+			"sub_path": "machine/FELIX Pro 3 0.35mm nozzle.json"
+		},
+		{
+			"name": "FELIX Pro 3 0.50mm nozzle",
+			"sub_path": "machine/FELIX Pro 3 0.50mm nozzle.json"
+		},
+		{
+			"name": "FELIX Pro 3 0.70mm nozzle",
+			"sub_path": "machine/FELIX Pro 3 0.70mm nozzle.json"
+		},
+		{
+			"name": "FELIX Pro L 3.0 0.25mm nozzle",
+			"sub_path": "machine/FELIX Pro L 3.0 0.25mm nozzle.json"
+		},
+		{
+			"name": "FELIX Pro L 3.0 0.35mm nozzle",
+			"sub_path": "machine/FELIX Pro L 3.0 0.35mm nozzle.json"
+		},
+		{
+			"name": "FELIX Pro L 3.0 0.50mm nozzle",
+			"sub_path": "machine/FELIX Pro L 3.0 0.50mm nozzle.json"
+		},
+		{
+			"name": "FELIX Pro L 3.0 0.70mm nozzle",
+			"sub_path": "machine/FELIX Pro L 3.0 0.70mm nozzle.json"
+		},
+		{
+			"name": "FELIX Pro XL 3.0 0.25mm nozzle",
+			"sub_path": "machine/FELIX Pro XL 3.0 0.25mm nozzle.json"
+		},
+		{
+			"name": "FELIX Pro XL 3.0 0.35mm nozzle",
+			"sub_path": "machine/FELIX Pro XL 3.0 0.35mm nozzle.json"
+		},
+		{
+			"name": "FELIX Pro XL 3.0 0.50mm nozzle",
+			"sub_path": "machine/FELIX Pro XL 3.0 0.50mm nozzle.json"
+		},
+		{
+			"name": "FELIX Pro XL 3.0 0.70mm nozzle",
+			"sub_path": "machine/FELIX Pro XL 3.0 0.70mm nozzle.json"
+		},
+		{
+			"name": "FELIX Tec 4 0.25mm nozzle",
+			"sub_path": "machine/FELIX Tec 4 0.25mm nozzle.json"
+		},
+		{
+			"name": "FELIX Tec 4 0.35mm nozzle",
+			"sub_path": "machine/FELIX Tec 4 0.35mm nozzle.json"
+		},
+		{
+			"name": "FELIX Tec 4 0.50mm nozzle",
+			"sub_path": "machine/FELIX Tec 4 0.50mm nozzle.json"
+		},
+		{
+			"name": "FELIX Tec 4 0.70mm nozzle",
+			"sub_path": "machine/FELIX Tec 4 0.70mm nozzle.json"
+		}
+	],
+	"process_list": [
+		{
+			"name": "fdm_process_common",
+			"sub_path": "process/fdm_process_common.json"
+		},
+		{
+			"name": "fdm_process_felix_food_common",
+			"sub_path": "process/fdm_process_felix_food_common.json"
+		},
+		{
+			"name": "fdm_process_felix_plastic_common",
+			"sub_path": "process/fdm_process_felix_plastic_common.json"
+		},
+		{
+			"name": "FELIX Food Coarse @ 0.50mm",
+			"sub_path": "process/FELIX Food Coarse @ 0.50mm.json"
+		},
+		{
+			"name": "FELIX Food Coarse @ 1.00mm",
+			"sub_path": "process/FELIX Food Coarse @ 1.00mm.json"
+		},
+		{
+			"name": "FELIX Food Coarse @ 2.00mm",
+			"sub_path": "process/FELIX Food Coarse @ 2.00mm.json"
+		},
+		{
+			"name": "FELIX Food Coarse @ 3.00mm",
+			"sub_path": "process/FELIX Food Coarse @ 3.00mm.json"
+		},
+		{
+			"name": "FELIX Food Coarse @ 4.00mm",
+			"sub_path": "process/FELIX Food Coarse @ 4.00mm.json"
+		},
+		{
+			"name": "FELIX Food Fine @ 0.50mm",
+			"sub_path": "process/FELIX Food Fine @ 0.50mm.json"
+		},
+		{
+			"name": "FELIX Food Fine @ 1.00mm",
+			"sub_path": "process/FELIX Food Fine @ 1.00mm.json"
+		},
+		{
+			"name": "FELIX Food Fine @ 2.00mm",
+			"sub_path": "process/FELIX Food Fine @ 2.00mm.json"
+		},
+		{
+			"name": "FELIX Food Fine @ 3.00mm",
+			"sub_path": "process/FELIX Food Fine @ 3.00mm.json"
+		},
+		{
+			"name": "FELIX Food Fine @ 4.00mm",
+			"sub_path": "process/FELIX Food Fine @ 4.00mm.json"
+		},
+		{
+			"name": "FELIX Food Normal @ 0.50mm",
+			"sub_path": "process/FELIX Food Normal @ 0.50mm.json"
+		},
+		{
+			"name": "FELIX Food Normal @ 1.00mm",
+			"sub_path": "process/FELIX Food Normal @ 1.00mm.json"
+		},
+		{
+			"name": "FELIX Food Normal @ 2.00mm",
+			"sub_path": "process/FELIX Food Normal @ 2.00mm.json"
+		},
+		{
+			"name": "FELIX Food Normal @ 3.00mm",
+			"sub_path": "process/FELIX Food Normal @ 3.00mm.json"
+		},
+		{
+			"name": "FELIX Food Normal @ 4.00mm",
+			"sub_path": "process/FELIX Food Normal @ 4.00mm.json"
+		},
+		{
+			"name": "FELIX Plastic Coarse @ 0.35mm",
+			"sub_path": "process/FELIX Plastic Coarse @ 0.35mm.json"
+		},
+		{
+			"name": "FELIX Plastic Coarse @ 0.50mm",
+			"sub_path": "process/FELIX Plastic Coarse @ 0.50mm.json"
+		},
+		{
+			"name": "FELIX Plastic Coarse @ 0.70mm",
+			"sub_path": "process/FELIX Plastic Coarse @ 0.70mm.json"
+		},
+		{
+			"name": "FELIX Plastic Fine @ 0.25mm",
+			"sub_path": "process/FELIX Plastic Fine @ 0.25mm.json"
+		},
+		{
+			"name": "FELIX Plastic Fine @ 0.35mm",
+			"sub_path": "process/FELIX Plastic Fine @ 0.35mm.json"
+		},
+		{
+			"name": "FELIX Plastic Fine @ 0.50mm",
+			"sub_path": "process/FELIX Plastic Fine @ 0.50mm.json"
+		},
+		{
+			"name": "FELIX Plastic Fine @ 0.70mm",
+			"sub_path": "process/FELIX Plastic Fine @ 0.70mm.json"
+		},
+		{
+			"name": "FELIX Plastic Normal @ 0.25mm",
+			"sub_path": "process/FELIX Plastic Normal @ 0.25mm.json"
+		},
+		{
+			"name": "FELIX Plastic Normal @ 0.35mm",
+			"sub_path": "process/FELIX Plastic Normal @ 0.35mm.json"
+		},
+		{
+			"name": "FELIX Plastic Normal @ 0.50mm",
+			"sub_path": "process/FELIX Plastic Normal @ 0.50mm.json"
+		},
+		{
+			"name": "FELIX Plastic Normal @ 0.70mm",
+			"sub_path": "process/FELIX Plastic Normal @ 0.70mm.json"
+		},
+		{
+			"name": "FELIX Plastic Slightly Coarse @ 0.35mm",
+			"sub_path": "process/FELIX Plastic Slightly Coarse @ 0.35mm.json"
+		},
+		{
+			"name": "FELIX Plastic Slightly Coarse @ 0.50mm",
+			"sub_path": "process/FELIX Plastic Slightly Coarse @ 0.50mm.json"
+		},
+		{
+			"name": "FELIX Plastic Slightly Coarse @ 0.70mm",
+			"sub_path": "process/FELIX Plastic Slightly Coarse @ 0.70mm.json"
+		},
+		{
+			"name": "FELIX Plastic Super Coarse @ 0.70mm",
+			"sub_path": "process/FELIX Plastic Super Coarse @ 0.70mm.json"
+		},
+		{
+			"name": "FELIX Plastic Super Fine @ 0.25mm",
+			"sub_path": "process/FELIX Plastic Super Fine @ 0.25mm.json"
+		},
+		{
+			"name": "FELIX Plastic Super Fine @ 0.35mm",
+			"sub_path": "process/FELIX Plastic Super Fine @ 0.35mm.json"
+		},
+		{
+			"name": "FELIX Plastic Very Coarse @ 0.50mm",
+			"sub_path": "process/FELIX Plastic Very Coarse @ 0.50mm.json"
+		},
+		{
+			"name": "FELIX Plastic Very Coarse @ 0.70mm",
+			"sub_path": "process/FELIX Plastic Very Coarse @ 0.70mm.json"
+		},
+		{
+			"name": "FELIX Plastic Very Fine @ 0.25mm",
+			"sub_path": "process/FELIX Plastic Very Fine @ 0.25mm.json"
+		},
+		{
+			"name": "FELIX Plastic Very Fine @ 0.35mm",
+			"sub_path": "process/FELIX Plastic Very Fine @ 0.35mm.json"
+		},
+		{
+			"name": "FELIX Plastic Very Fine @ 0.50mm",
+			"sub_path": "process/FELIX Plastic Very Fine @ 0.50mm.json"
+		}
+	],
+	"filament_list": [
+		{
+			"name": "fdm_filament_common",
+			"sub_path": "filament/fdm_filament_common.json"
+		},
+		{
+			"name": "fdm_filament_food",
+			"sub_path": "filament/fdm_filament_food.json"
+		},
+		{
+			"name": "fdm_filament_abs",
+			"sub_path": "filament/fdm_filament_abs.json"
+		},
+		{
+			"name": "fdm_filament_asa",
+			"sub_path": "filament/fdm_filament_asa.json"
+		},
+		{
+			"name": "fdm_filament_flex",
+			"sub_path": "filament/fdm_filament_flex.json"
+		},
+		{
+			"name": "fdm_filament_pa",
+			"sub_path": "filament/fdm_filament_pa.json"
+		},
+		{
+			"name": "fdm_filament_pa11cf",
+			"sub_path": "filament/fdm_filament_pa11cf.json"
+		},
+		{
+			"name": "fdm_filament_pc",
+			"sub_path": "filament/fdm_filament_pc.json"
+		},
+		{
+			"name": "fdm_filament_pccf",
+			"sub_path": "filament/fdm_filament_pccf.json"
+		},
+		{
+			"name": "fdm_filament_pet",
+			"sub_path": "filament/fdm_filament_pet.json"
+		},
+		{
+			"name": "fdm_filament_pla",
+			"sub_path": "filament/fdm_filament_pla.json"
+		},
+		{
+			"name": "fdm_filament_pva",
+			"sub_path": "filament/fdm_filament_pva.json"
+		},
+		{
+			"name": "fdm_filament_pvb",
+			"sub_path": "filament/fdm_filament_pvb.json"
+		},
+		{
+			"name": "fdm_filament_tpu",
+			"sub_path": "filament/fdm_filament_tpu.json"
+		},
+		{
+			"name": "Food Medium Plastic Syringe @0.50mm",
+			"sub_path": "filament/FELIXFood/Food Medium Plastic Syringe @0.50mm.json"
+		},
+		{
+			"name": "Food Medium Plastic Syringe @1.00mm",
+			"sub_path": "filament/FELIXFood/Food Medium Plastic Syringe @1.00mm.json"
+		},
+		{
+			"name": "Food Medium Plastic Syringe @2.00mm",
+			"sub_path": "filament/FELIXFood/Food Medium Plastic Syringe @2.00mm.json"
+		},
+		{
+			"name": "Food Medium Plastic Syringe @3.00mm",
+			"sub_path": "filament/FELIXFood/Food Medium Plastic Syringe @3.00mm.json"
+		},
+		{
+			"name": "Food Medium Plastic Syringe @4.00mm",
+			"sub_path": "filament/FELIXFood/Food Medium Plastic Syringe @4.00mm.json"
+		},
+		{
+			"name": "Food Medium Stainless Steel Syringe @0.50mm",
+			"sub_path": "filament/FELIXFood/Food Medium Stainless Steel Syringe @0.50mm.json"
+		},
+		{
+			"name": "Food Medium Stainless Steel Syringe @1.00mm",
+			"sub_path": "filament/FELIXFood/Food Medium Stainless Steel Syringe @1.00mm.json"
+		},
+		{
+			"name": "Food Medium Stainless Steel Syringe @2.00mm",
+			"sub_path": "filament/FELIXFood/Food Medium Stainless Steel Syringe @2.00mm.json"
+		},
+		{
+			"name": "Food Medium Stainless Steel Syringe @3.00mm",
+			"sub_path": "filament/FELIXFood/Food Medium Stainless Steel Syringe @3.00mm.json"
+		},
+		{
+			"name": "Food Medium Stainless Steel Syringe @4.00mm",
+			"sub_path": "filament/FELIXFood/Food Medium Stainless Steel Syringe @4.00mm.json"
+		},
+		{
+			"name": "Food Thick Stainless Steel Syringe @0.50mm",
+			"sub_path": "filament/FELIXFood/Food Thick Stainless Steel Syringe @0.50mm.json"
+		},
+		{
+			"name": "Food Thick Stainless Steel Syringe @1.00mm",
+			"sub_path": "filament/FELIXFood/Food Thick Stainless Steel Syringe @1.00mm.json"
+		},
+		{
+			"name": "Food Thick Stainless Steel Syringe @2.00mm",
+			"sub_path": "filament/FELIXFood/Food Thick Stainless Steel Syringe @2.00mm.json"
+		},
+		{
+			"name": "Food Thick Stainless Steel Syringe @3.00mm",
+			"sub_path": "filament/FELIXFood/Food Thick Stainless Steel Syringe @3.00mm.json"
+		},
+		{
+			"name": "Food Thick Stainless Steel Syringe @4.00mm",
+			"sub_path": "filament/FELIXFood/Food Thick Stainless Steel Syringe @4.00mm.json"
+		},
+		{
+			"name": "Food Thin Plastic Syringe @0.50mm",
+			"sub_path": "filament/FELIXFood/Food Thin Plastic Syringe @0.50mm.json"
+		},
+		{
+			"name": "Food Thin Plastic Syringe @1.00mm",
+			"sub_path": "filament/FELIXFood/Food Thin Plastic Syringe @1.00mm.json"
+		},
+		{
+			"name": "Food Thin Plastic Syringe @2.00mm",
+			"sub_path": "filament/FELIXFood/Food Thin Plastic Syringe @2.00mm.json"
+		},
+		{
+			"name": "Food Thin Plastic Syringe @3.00mm",
+			"sub_path": "filament/FELIXFood/Food Thin Plastic Syringe @3.00mm.json"
+		},
+		{
+			"name": "Food Thin Plastic Syringe @4.00mm",
+			"sub_path": "filament/FELIXFood/Food Thin Plastic Syringe @4.00mm.json"
+		},
+		{
+			"name": "Food Thin Stainless Steel Syringe @0.50mm",
+			"sub_path": "filament/FELIXFood/Food Thin Stainless Steel Syringe @0.50mm.json"
+		},
+		{
+			"name": "Food Thin Stainless Steel Syringe @1.00mm",
+			"sub_path": "filament/FELIXFood/Food Thin Stainless Steel Syringe @1.00mm.json"
+		},
+		{
+			"name": "Food Thin Stainless Steel Syringe @2.00mm",
+			"sub_path": "filament/FELIXFood/Food Thin Stainless Steel Syringe @2.00mm.json"
+		},
+		{
+			"name": "Food Thin Stainless Steel Syringe @3.00mm",
+			"sub_path": "filament/FELIXFood/Food Thin Stainless Steel Syringe @3.00mm.json"
+		},
+		{
+			"name": "Food Thin Stainless Steel Syringe @4.00mm",
+			"sub_path": "filament/FELIXFood/Food Thin Stainless Steel Syringe @4.00mm.json"
+		},
+		{
+			"name": "Food Very Thick Stainless Steel Syringe @1.00mm",
+			"sub_path": "filament/FELIXFood/Food Very Thick Stainless Steel Syringe @1.00mm.json"
+		},
+		{
+			"name": "Food Very Thick Stainless Steel Syringe @2.00mm",
+			"sub_path": "filament/FELIXFood/Food Very Thick Stainless Steel Syringe @2.00mm.json"
+		},
+		{
+			"name": "Food Very Thick Stainless Steel Syringe @3.00mm",
+			"sub_path": "filament/FELIXFood/Food Very Thick Stainless Steel Syringe @3.00mm.json"
+		},
+		{
+			"name": "Food Very Thick Stainless Steel Syringe @4.00mm",
+			"sub_path": "filament/FELIXFood/Food Very Thick Stainless Steel Syringe @4.00mm.json"
+		},
+		{
+			"name": "Food Very Thin Plastic Syringe @0.50mm",
+			"sub_path": "filament/FELIXFood/Food Very Thin Plastic Syringe @0.50mm.json"
+		},
+		{
+			"name": "Food Very Thin Plastic Syringe @1.00mm",
+			"sub_path": "filament/FELIXFood/Food Very Thin Plastic Syringe @1.00mm.json"
+		},
+		{
+			"name": "Food Very Thin Plastic Syringe @2.00mm",
+			"sub_path": "filament/FELIXFood/Food Very Thin Plastic Syringe @2.00mm.json"
+		},
+		{
+			"name": "Food Very Thin Plastic Syringe @3.00mm",
+			"sub_path": "filament/FELIXFood/Food Very Thin Plastic Syringe @3.00mm.json"
+		},
+		{
+			"name": "Food Very Thin Plastic Syringe @4.00mm",
+			"sub_path": "filament/FELIXFood/Food Very Thin Plastic Syringe @4.00mm.json"
+		},
+		{
+			"name": "Food Very Thin Stainless Steel  Syringe  @1.00mm",
+			"sub_path": "filament/FELIXFood/Food Very Thin Stainless Steel  Syringe  @1.00mm.json"
+		},
+		{
+			"name": "Food Very Thin Stainless Steel  Syringe  @2.00mm",
+			"sub_path": "filament/FELIXFood/Food Very Thin Stainless Steel  Syringe  @2.00mm.json"
+		},
+		{
+			"name": "Food Very Thin Stainless Steel  Syringe  @3.00mm",
+			"sub_path": "filament/FELIXFood/Food Very Thin Stainless Steel  Syringe  @3.00mm.json"
+		},
+		{
+			"name": "Food Very Thin Stainless Steel  Syringe  @4.00mm",
+			"sub_path": "filament/FELIXFood/Food Very Thin Stainless Steel  Syringe  @4.00mm.json"
+		},
+		{
+			"name": "Food Very Thin Stainless Steel Syringe @0.50mm",
+			"sub_path": "filament/FELIXFood/Food Very Thin Stainless Steel Syringe @0.50mm.json"
+		},
+		{
+			"name": "FORMFUTURA TitanX ABS Brass @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA TitanX ABS Brass @ 0.35mm.json"
+		},
+		{
+			"name": "FORMFUTURA TitanX ABS Brass @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA TitanX ABS Brass @ 0.50mm.json"
+		},
+		{
+			"name": "FORMFUTURA TitanX ABS Hardened Steel @ 0.25mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA TitanX ABS Hardened Steel @ 0.25mm.json"
+		},
+		{
+			"name": "FORMFUTURA TitanX ABS Hardened Steel @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA TitanX ABS Hardened Steel @ 0.35mm.json"
+		},
+		{
+			"name": "FORMFUTURA TitanX ABS Hardened Steel @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA TitanX ABS Hardened Steel @ 0.50mm.json"
+		},
+		{
+			"name": "FORMFUTURA TitanX ABS Hardened Steel @ 0.70mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA TitanX ABS Hardened Steel @ 0.70mm.json"
+		},
+		{
+			"name": "Ultrafuse ABS Fusion+ Brass @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/Ultrafuse ABS Fusion+ Brass @ 0.35mm.json"
+		},
+		{
+			"name": "Ultrafuse ABS Fusion+ Brass @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/Ultrafuse ABS Fusion+ Brass @ 0.50mm.json"
+		},
+		{
+			"name": "Ultrafuse ABS Fusion+ Hardened Steel @ 0.25mm",
+			"sub_path": "filament/FELIXPlastic/Ultrafuse ABS Fusion+ Hardened Steel @ 0.25mm.json"
+		},
+		{
+			"name": "Ultrafuse ABS Fusion+ Hardened Steel @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/Ultrafuse ABS Fusion+ Hardened Steel @ 0.35mm.json"
+		},
+		{
+			"name": "Ultrafuse ABS Fusion+ Hardened Steel @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/Ultrafuse ABS Fusion+ Hardened Steel @ 0.50mm.json"
+		},
+		{
+			"name": "Ultrafuse ABS Fusion+ Hardened Steel @ 0.70mm",
+			"sub_path": "filament/FELIXPlastic/Ultrafuse ABS Fusion+ Hardened Steel @ 0.70mm.json"
+		},
+		{
+			"name": "FORMFUTURA AppoloX ASA Brass @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA AppoloX ASA Brass @ 0.35mm.json"
+		},
+		{
+			"name": "FORMFUTURA AppoloX ASA Brass @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA AppoloX ASA Brass @ 0.50mm.json"
+		},
+		{
+			"name": "FORMFUTURA AppoloX ASA Hardened Steel @ 0.25mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA AppoloX ASA Hardened Steel @ 0.25mm.json"
+		},
+		{
+			"name": "FORMFUTURA AppoloX ASA Hardened Steel @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA AppoloX ASA Hardened Steel @ 0.35mm.json"
+		},
+		{
+			"name": "FORMFUTURA AppoloX ASA Hardened Steel @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA AppoloX ASA Hardened Steel @ 0.50mm.json"
+		},
+		{
+			"name": "FORMFUTURA AppoloX ASA Hardened Steel @ 0.70mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA AppoloX ASA Hardened Steel @ 0.70mm.json"
+		},
+		{
+			"name": "FELIX FLEX  Brass @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/FELIX FLEX  Brass @ 0.35mm.json"
+		},
+		{
+			"name": "FELIX FLEX  Brass @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/FELIX FLEX  Brass @ 0.50mm.json"
+		},
+		{
+			"name": "FELIX FLEX Hardened Steel @ 0.25mm",
+			"sub_path": "filament/FELIXPlastic/FELIX FLEX Hardened Steel @ 0.25mm.json"
+		},
+		{
+			"name": "FELIX FLEX Hardened Steel @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/FELIX FLEX Hardened Steel @ 0.35mm.json"
+		},
+		{
+			"name": "FELIX FLEX Hardened Steel @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/FELIX FLEX Hardened Steel @ 0.50mm.json"
+		},
+		{
+			"name": "FELIX FLEX Hardened Steel @ 0.70mm",
+			"sub_path": "filament/FELIXPlastic/FELIX FLEX Hardened Steel @ 0.70mm.json"
+		},
+		{
+			"name": "FELIX PETG Brass @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/FELIX PETG Brass @ 0.35mm.json"
+		},
+		{
+			"name": "FELIX PETG Brass @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/FELIX PETG Brass @ 0.50mm.json"
+		},
+		{
+			"name": "FELIX PETG Hardened Steel @ 0.25mm",
+			"sub_path": "filament/FELIXPlastic/FELIX PETG Hardened Steel @ 0.25mm.json"
+		},
+		{
+			"name": "FELIX PETG Hardened Steel @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/FELIX PETG Hardened Steel @ 0.35mm.json"
+		},
+		{
+			"name": "FELIX PETG Hardened Steel @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/FELIX PETG Hardened Steel @ 0.50mm.json"
+		},
+		{
+			"name": "FELIX PETG Hardened Steel @ 0.70mm",
+			"sub_path": "filament/FELIXPlastic/FELIX PETG Hardened Steel @ 0.70mm.json"
+		},
+		{
+			"name": "FELIX Premium PLA Brass @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/FELIX Premium PLA Brass @ 0.35mm.json"
+		},
+		{
+			"name": "FELIX Premium PLA Brass @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/FELIX Premium PLA Brass @ 0.50mm.json"
+		},
+		{
+			"name": "FELIX Premium PLA Hardened Steel @ 0.25mm",
+			"sub_path": "filament/FELIXPlastic/FELIX Premium PLA Hardened Steel @ 0.25mm.json"
+		},
+		{
+			"name": "FELIX Premium PLA Hardened Steel @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/FELIX Premium PLA Hardened Steel @ 0.35mm.json"
+		},
+		{
+			"name": "FELIX Premium PLA Hardened Steel @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/FELIX Premium PLA Hardened Steel @ 0.50mm.json"
+		},
+		{
+			"name": "FELIX Premium PLA Hardened Steel @ 0.70mm",
+			"sub_path": "filament/FELIXPlastic/FELIX Premium PLA Hardened Steel @ 0.70mm.json"
+		},
+		{
+			"name": "FELIX Wood  Brass @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/FELIX Wood  Brass @ 0.35mm.json"
+		},
+		{
+			"name": "FELIX Wood Brass @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/FELIX Wood Brass @ 0.50mm.json"
+		},
+		{
+			"name": "FELIX Wood Hardened Steel @ 0.25mm",
+			"sub_path": "filament/FELIXPlastic/FELIX Wood Hardened Steel @ 0.25mm.json"
+		},
+		{
+			"name": "FELIX Wood Hardened Steel @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/FELIX Wood Hardened Steel @ 0.35mm.json"
+		},
+		{
+			"name": "FELIX Wood Hardened Steel @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/FELIX Wood Hardened Steel @ 0.50mm.json"
+		},
+		{
+			"name": "FELIX Wood Hardened Steel @ 0.70mm",
+			"sub_path": "filament/FELIXPlastic/FELIX Wood Hardened Steel @ 0.70mm.json"
+		},
+		{
+			"name": "FORMFUTURA ePLA Brass @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA ePLA Brass @ 0.35mm.json"
+		},
+		{
+			"name": "FORMFUTURA ePLA Brass @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA ePLA Brass @ 0.50mm.json"
+		},
+		{
+			"name": "FORMFUTURA ePLA Hardened Steel @ 0.25mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA ePLA Hardened Steel @ 0.25mm.json"
+		},
+		{
+			"name": "FORMFUTURA ePLA Hardened Steel @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA ePLA Hardened Steel @ 0.35mm.json"
+		},
+		{
+			"name": "FORMFUTURA ePLA Hardened Steel @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA ePLA Hardened Steel @ 0.50mm.json"
+		},
+		{
+			"name": "FORMFUTURA ePLA Hardened Steel @ 0.70mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA ePLA Hardened Steel @ 0.70mm.json"
+		},
+		{
+			"name": "FORMFUTURA Aquasolve PVA Brass @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA Aquasolve PVA Brass @ 0.35mm.json"
+		},
+		{
+			"name": "FORMFUTURA Aquasolve PVA Brass @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA Aquasolve PVA Brass @ 0.50mm.json"
+		},
+		{
+			"name": "FORMFUTURA Aquasolve PVA Hardened Steel @ 0.25mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA Aquasolve PVA Hardened Steel @ 0.25mm.json"
+		},
+		{
+			"name": "FORMFUTURA Aquasolve PVA Hardened Steel @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA Aquasolve PVA Hardened Steel @ 0.35mm.json"
+		},
+		{
+			"name": "FORMFUTURA Aquasolve PVA Hardened Steel @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA Aquasolve PVA Hardened Steel @ 0.50mm.json"
+		},
+		{
+			"name": "FORMFUTURA Aquasolve PVA Hardened Steel @ 0.70mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA Aquasolve PVA Hardened Steel @ 0.70mm.json"
+		}
+	]
+}

resources/profiles/FELIX Printers/FELIX Build plate image.svg

@@ -0,0 +1,28 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<svg id="a" xmlns="http://www.w3.org/2000/svg" width="180.62mm" height="180.62mm" viewBox="0 0 512 512" xmlns:c2pa="http://c2pa.org/manifest">
+  <rect x="0" y="0" width="512" height="512" fill="none"/>
+  <g fill="#ffffff" transform="translate(5,460) scale(0.2)">
+    <g>
+      <path d="M139.4.8l-.2,62c-34.3,0-63.4,21.8-73.2,51.9C26.4,141,.2,187.8.2,241.3H0l.2-101.3C.2,63.1,62.4.8,139.4.8Z"/>
+      <path d="M139.1,92.5l-.8,62.5c-42.6,0-77.1,38.6-77.1,86.3l1-103.9c0-7.9,1.3-15.5,3.6-22.7,21.2-14.1,46.3-22.3,73.2-22.3Z"/>
+      <path d="M65.9,114.7c-2.3,7.2-3.6,14.8-3.6,22.7l-1,103.9H.2c0-53.5,26.3-100.3,65.7-126.6Z"/>
+    </g>
+    <polygon points="202.8 .4 202.8 92.9 226.2 92.9 226.2 56 259.8 56 259.8 36.1 226.2 36.1 226.2 19.4 265.7 19.4 265.7 0 202.8 .4"/>
+    <polygon points="282.3 -.3 282.3 93 346.1 93 346.1 72.4 306.8 72.4 306.8 55.6 341.7 55.6 341.7 36.4 306.5 36.4 306.5 19.6 346.2 19.6 346.2 -.3 282.3 -.3"/>
+    <polygon points="365.9 92.8 429.5 92.8 429.5 70.9 389.6 70.9 389.6 .2 365 .2 365.9 92.8"/>
+    <polygon points="448 0 471.9 0 471.9 92.5 447.5 92.5 448 0"/>
+    <path d="M485.1,92.5s34.7-44.3,33.4-46.5S485.7,0,485.7,0h29l18.4,24.8L550.1,0h26.6l-29.9,45.4,33.1,46.8h-28.8l-19.3-27.4-18.9,28.1-27.9-.4Z"/>
+    <g>
+      <path d="M210.9,154.1c-1.9,0-3.7-.2-5.3-.7-1.6-.4-3-1-4.2-1.6v-3.9c1.1.6,2.4,1.1,3.9,1.6,1.5.5,3.2.7,5.1.7,3.1,0,5.5-.6,7.2-1.7,1.7-1.2,2.5-2.8,2.5-5s-.8-3.9-2.5-5c-1.7-1.2-4.2-1.7-7.4-1.7h-3.9v-3.7h4c2.6,0,4.5-.5,5.9-1.5,1.4-1,2-2.4,2-4.2s-.3-2.3-1-3.1c-.6-.8-1.6-1.5-2.8-1.9-1.3-.4-2.8-.7-4.6-.7s-3,.2-4.3.6c-1.3.4-2.4.8-3.3,1.3v-3.9c1.1-.5,2.3-.9,3.6-1.3,1.3-.4,2.8-.5,4.5-.5s4,.3,5.5.8c1.5.5,2.7,1.3,3.6,2.2.9.9,1.6,1.9,2,3.1.4,1.1.6,2.3.6,3.4s-.2,2.4-.7,3.3c-.5.9-1,1.7-1.6,2.2-.6.6-1.4,1.1-2.3,1.6,1.3.7,2.3,1.4,3.2,2.1s1.6,1.7,2.2,2.8c.6,1.1,1,2.5,1,4.2s-.2,2.5-.7,3.8c-.5,1.2-1.2,2.4-2.2,3.4s-2.4,1.8-4,2.4c-1.7.6-3.7.9-6.1.9Z"/>
+      <path d="M232.1,153.7v-35.4h11.1c5.5,0,9.7,1.5,12.4,4.4,2.8,3,4.2,7.4,4.2,13.2s-1.4,10.3-4.2,13.2c-2.8,3-6.9,4.5-12.4,4.5h-11.1ZM235.9,150h7c4.5,0,7.8-1.1,9.9-3.4,2-2.3,3.1-5.8,3.1-10.7s-1-8.4-3.1-10.7c-2-2.3-5.3-3.4-9.9-3.4h-7v28.2Z"/>
+      <path d="M291.9,154.4c-.8,0-1.7-.1-2.6-.3-1-.2-1.9-.5-2.8-.8-.9-.3-1.7-.7-2.4-1l1.3-1.3v14.2h-3.8v-33.2c0-1.1.3-2,1-2.7.7-.7,1.6-1.2,2.7-1.6,1.1-.4,2.3-.6,3.5-.8,1.2-.2,2.4-.2,3.5-.2,2.1,0,4.1.4,6,1.3,1.9.9,3.4,2.4,4.6,4.5s1.7,5,1.7,8.6-.5,5.1-1.5,7.1c-1,2-2.4,3.5-4.3,4.6-1.9,1.1-4.2,1.6-6.9,1.6ZM291.9,150.9c1.9,0,3.5-.4,4.8-1.2,1.3-.8,2.2-2,2.8-3.5.6-1.5,1-3.2,1-5.1s-.2-3.7-.6-5.4c-.4-1.7-1.2-3-2.4-4-1.2-1-3-1.5-5.2-1.5s-3.4.2-4.8.6c-1.4.4-2,1-2,1.8v16.4c1.1.6,2.2,1.1,3.3,1.4s2.2.5,3.3.5Z"/>
+      <path d="M311.1,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1c-.8,0-1.6.2-2.4.3-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
+      <path d="M330.5,122.5v-4.2h4.2v4.2h-4.2ZM330.8,153.7v-26.4h3.8v26.4h-3.8Z"/>
+      <path d="M342.7,129.3c.8-.4,1.7-.8,2.6-1.1.9-.3,1.8-.6,2.8-.8.9-.2,1.9-.4,2.9-.5,1-.1,2-.2,2.9-.2,2.6,0,4.6.4,6.1,1.1,1.5.8,2.6,1.9,3.3,3.3.7,1.4,1,3.2,1,5.2v17.2h-3.8v-17.2c0-.6,0-1.3-.2-2-.2-.7-.5-1.4-.9-2-.5-.7-1.2-1.2-2.1-1.6s-2.2-.6-3.8-.6-2.2,0-3.4.3-2.4.4-3.6.8v22.4h-3.8v-24.3Z"/>
+      <path d="M380.7,154.1c-1.9,0-3.4-.6-4.7-1.7-1.3-1.1-1.9-2.9-1.9-5.1v-16.5h-4.6v-3.5h4.6v-7.5h3.8v7.5h6.8v3.5h-6.8v15.3c0,1.5.2,2.6.7,3.3s1.4,1.1,2.8,1.1,1.3,0,1.9-.2,1.1-.3,1.5-.5v3.6c-.5.2-1.1.3-1.9.5s-1.5.2-2.1.2Z"/>
+      <path d="M402,154.4c-2.5,0-4.7-.5-6.5-1.6-1.8-1-3.3-2.6-4.2-4.7-1-2.1-1.5-4.7-1.5-7.8,0-4.6,1-8,3.1-10.3,2.1-2.3,4.9-3.4,8.5-3.4s5.1.6,6.8,1.9c1.7,1.3,2.9,3,3.7,5.1.7,2.2,1.1,4.6,1.1,7.3h-21.3l.3-3.5h18.5l-1.5.5c-.1-2.6-.8-4.6-2-5.9-1.2-1.3-3.1-2-5.6-2s-3.2.3-4.3,1c-1.1.6-2,1.7-2.6,3.3s-.8,3.8-.8,6.6.8,5.7,2.3,7.3c1.5,1.7,3.6,2.5,6.3,2.5s2.5,0,3.6-.3,2.1-.5,3-.8c.9-.4,1.7-.7,2.4-1.2v3.9c-1.3.6-2.7,1.1-4.2,1.4-1.5.3-3.2.5-5.1.5Z"/>
+      <path d="M419.5,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1-1.6.2-2.4.3c-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
+      <path d="M446.4,154.4c-1.9,0-3.5-.2-4.8-.6s-2.6-.9-4-1.6v-4c1.1.6,2.1,1.1,2.9,1.5s1.7.7,2.6.9c.9.2,1.9.3,3,.3,1.8,0,3.2-.4,4.3-1.2,1.1-.8,1.7-1.8,1.7-3s-.3-1.7-.8-2.3-1.2-1-2.1-1.3c-.8-.4-1.7-.7-2.7-1.1-1-.3-2.1-.6-3.1-.9-1-.3-2-.8-2.9-1.3-.9-.5-1.6-1.3-2.1-2.1-.5-.9-.8-2-.8-3.4s.3-2.5.8-3.4c.5-1,1.3-1.7,2.1-2.4.9-.6,1.9-1.1,3-1.4,1.1-.3,2.2-.4,3.3-.4,1.6,0,2.9.2,4.1.6,1.1.4,2.3.9,3.5,1.4v3.8c-1.3-.7-2.5-1.3-3.6-1.7-1.1-.4-2.3-.7-3.8-.7s-2.7.3-3.9.9c-1.1.6-1.7,1.5-1.7,2.7s.3,1.8.9,2.4,1.4,1,2.3,1.4c1,.3,2,.7,3.1,1,.9.3,1.8.6,2.8.9,1,.3,1.8.8,2.7,1.3.8.5,1.5,1.3,2,2.1.5.9.8,2,.8,3.4s-.5,3.4-1.4,4.6-2.2,2.1-3.6,2.7c-1.5.6-3,.8-4.5.8Z"/>
+    </g>
+  </g>
+</svg>

resources/profiles/FELIX Printers/FELIX Food Series build plate texture.svg

@@ -0,0 +1,28 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<svg id="a" xmlns="http://www.w3.org/2000/svg" width="180.62mm" height="180.62mm" viewBox="0 0 250 195" xmlns:c2pa="http://c2pa.org/manifest">
+  <rect x="0" y="0" width="250" height="195" fill="none"/>
+  <g fill="#ffffff" transform="translate(2,169) scale(0.1)">
+    <g>
+      <path d="M139.4.8l-.2,62c-34.3,0-63.4,21.8-73.2,51.9C26.4,141,.2,187.8.2,241.3H0l.2-101.3C.2,63.1,62.4.8,139.4.8Z"/>
+      <path d="M139.1,92.5l-.8,62.5c-42.6,0-77.1,38.6-77.1,86.3l1-103.9c0-7.9,1.3-15.5,3.6-22.7,21.2-14.1,46.3-22.3,73.2-22.3Z"/>
+      <path d="M65.9,114.7c-2.3,7.2-3.6,14.8-3.6,22.7l-1,103.9H.2c0-53.5,26.3-100.3,65.7-126.6Z"/>
+    </g>
+    <polygon points="202.8 .4 202.8 92.9 226.2 92.9 226.2 56 259.8 56 259.8 36.1 226.2 36.1 226.2 19.4 265.7 19.4 265.7 0 202.8 .4"/>
+    <polygon points="282.3 -.3 282.3 93 346.1 93 346.1 72.4 306.8 72.4 306.8 55.6 341.7 55.6 341.7 36.4 306.5 36.4 306.5 19.6 346.2 19.6 346.2 -.3 282.3 -.3"/>
+    <polygon points="365.9 92.8 429.5 92.8 429.5 70.9 389.6 70.9 389.6 .2 365 .2 365.9 92.8"/>
+    <polygon points="448 0 471.9 0 471.9 92.5 447.5 92.5 448 0"/>
+    <path d="M485.1,92.5s34.7-44.3,33.4-46.5S485.7,0,485.7,0h29l18.4,24.8L550.1,0h26.6l-29.9,45.4,33.1,46.8h-28.8l-19.3-27.4-18.9,28.1-27.9-.4Z"/>
+    <g>
+      <path d="M210.9,154.1c-1.9,0-3.7-.2-5.3-.7-1.6-.4-3-1-4.2-1.6v-3.9c1.1.6,2.4,1.1,3.9,1.6,1.5.5,3.2.7,5.1.7,3.1,0,5.5-.6,7.2-1.7,1.7-1.2,2.5-2.8,2.5-5s-.8-3.9-2.5-5c-1.7-1.2-4.2-1.7-7.4-1.7h-3.9v-3.7h4c2.6,0,4.5-.5,5.9-1.5,1.4-1,2-2.4,2-4.2s-.3-2.3-1-3.1c-.6-.8-1.6-1.5-2.8-1.9-1.3-.4-2.8-.7-4.6-.7s-3,.2-4.3.6c-1.3.4-2.4.8-3.3,1.3v-3.9c1.1-.5,2.3-.9,3.6-1.3,1.3-.4,2.8-.5,4.5-.5s4,.3,5.5.8c1.5.5,2.7,1.3,3.6,2.2.9.9,1.6,1.9,2,3.1.4,1.1.6,2.3.6,3.4s-.2,2.4-.7,3.3c-.5.9-1,1.7-1.6,2.2-.6.6-1.4,1.1-2.3,1.6,1.3.7,2.3,1.4,3.2,2.1s1.6,1.7,2.2,2.8c.6,1.1,1,2.5,1,4.2s-.2,2.5-.7,3.8c-.5,1.2-1.2,2.4-2.2,3.4s-2.4,1.8-4,2.4c-1.7.6-3.7.9-6.1.9Z"/>
+      <path d="M232.1,153.7v-35.4h11.1c5.5,0,9.7,1.5,12.4,4.4,2.8,3,4.2,7.4,4.2,13.2s-1.4,10.3-4.2,13.2c-2.8,3-6.9,4.5-12.4,4.5h-11.1ZM235.9,150h7c4.5,0,7.8-1.1,9.9-3.4,2-2.3,3.1-5.8,3.1-10.7s-1-8.4-3.1-10.7c-2-2.3-5.3-3.4-9.9-3.4h-7v28.2Z"/>
+      <path d="M291.9,154.4c-.8,0-1.7-.1-2.6-.3-1-.2-1.9-.5-2.8-.8-.9-.3-1.7-.7-2.4-1l1.3-1.3v14.2h-3.8v-33.2c0-1.1.3-2,1-2.7.7-.7,1.6-1.2,2.7-1.6,1.1-.4,2.3-.6,3.5-.8,1.2-.2,2.4-.2,3.5-.2,2.1,0,4.1.4,6,1.3,1.9.9,3.4,2.4,4.6,4.5s1.7,5,1.7,8.6-.5,5.1-1.5,7.1c-1,2-2.4,3.5-4.3,4.6-1.9,1.1-4.2,1.6-6.9,1.6ZM291.9,150.9c1.9,0,3.5-.4,4.8-1.2,1.3-.8,2.2-2,2.8-3.5.6-1.5,1-3.2,1-5.1s-.2-3.7-.6-5.4c-.4-1.7-1.2-3-2.4-4-1.2-1-3-1.5-5.2-1.5s-3.4.2-4.8.6c-1.4.4-2,1-2,1.8v16.4c1.1.6,2.2,1.1,3.3,1.4s2.2.5,3.3.5Z"/>
+      <path d="M311.1,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1c-.8,0-1.6.2-2.4.3-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
+      <path d="M330.5,122.5v-4.2h4.2v4.2h-4.2ZM330.8,153.7v-26.4h3.8v26.4h-3.8Z"/>
+      <path d="M342.7,129.3c.8-.4,1.7-.8,2.6-1.1.9-.3,1.8-.6,2.8-.8.9-.2,1.9-.4,2.9-.5,1-.1,2-.2,2.9-.2,2.6,0,4.6.4,6.1,1.1,1.5.8,2.6,1.9,3.3,3.3.7,1.4,1,3.2,1,5.2v17.2h-3.8v-17.2c0-.6,0-1.3-.2-2-.2-.7-.5-1.4-.9-2-.5-.7-1.2-1.2-2.1-1.6s-2.2-.6-3.8-.6-2.2,0-3.4.3-2.4.4-3.6.8v22.4h-3.8v-24.3Z"/>
+      <path d="M380.7,154.1c-1.9,0-3.4-.6-4.7-1.7-1.3-1.1-1.9-2.9-1.9-5.1v-16.5h-4.6v-3.5h4.6v-7.5h3.8v7.5h6.8v3.5h-6.8v15.3c0,1.5.2,2.6.7,3.3s1.4,1.1,2.8,1.1,1.3,0,1.9-.2,1.1-.3,1.5-.5v3.6c-.5.2-1.1.3-1.9.5s-1.5.2-2.1.2Z"/>
+      <path d="M402,154.4c-2.5,0-4.7-.5-6.5-1.6-1.8-1-3.3-2.6-4.2-4.7-1-2.1-1.5-4.7-1.5-7.8,0-4.6,1-8,3.1-10.3,2.1-2.3,4.9-3.4,8.5-3.4s5.1.6,6.8,1.9c1.7,1.3,2.9,3,3.7,5.1.7,2.2,1.1,4.6,1.1,7.3h-21.3l.3-3.5h18.5l-1.5.5c-.1-2.6-.8-4.6-2-5.9-1.2-1.3-3.1-2-5.6-2s-3.2.3-4.3,1c-1.1.6-2,1.7-2.6,3.3s-.8,3.8-.8,6.6.8,5.7,2.3,7.3c1.5,1.7,3.6,2.5,6.3,2.5s2.5,0,3.6-.3,2.1-.5,3-.8c.9-.4,1.7-.7,2.4-1.2v3.9c-1.3.6-2.7,1.1-4.2,1.4-1.5.3-3.2.5-5.1.5Z"/>
+      <path d="M419.5,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1-1.6.2-2.4.3c-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
+      <path d="M446.4,154.4c-1.9,0-3.5-.2-4.8-.6s-2.6-.9-4-1.6v-4c1.1.6,2.1,1.1,2.9,1.5s1.7.7,2.6.9c.9.2,1.9.3,3,.3,1.8,0,3.2-.4,4.3-1.2,1.1-.8,1.7-1.8,1.7-3s-.3-1.7-.8-2.3-1.2-1-2.1-1.3c-.8-.4-1.7-.7-2.7-1.1-1-.3-2.1-.6-3.1-.9-1-.3-2-.8-2.9-1.3-.9-.5-1.6-1.3-2.1-2.1-.5-.9-.8-2-.8-3.4s.3-2.5.8-3.4c.5-1,1.3-1.7,2.1-2.4.9-.6,1.9-1.1,3-1.4,1.1-.3,2.2-.4,3.3-.4,1.6,0,2.9.2,4.1.6,1.1.4,2.3.9,3.5,1.4v3.8c-1.3-.7-2.5-1.3-3.6-1.7-1.1-.4-2.3-.7-3.8-.7s-2.7.3-3.9.9c-1.1.6-1.7,1.5-1.7,2.7s.3,1.8.9,2.4,1.4,1,2.3,1.4c1,.3,2,.7,3.1,1,.9.3,1.8.6,2.8.9,1,.3,1.8.8,2.7,1.3.8.5,1.5,1.3,2,2.1.5.9.8,2,.8,3.4s-.5,3.4-1.4,4.6-2.2,2.1-3.6,2.7c-1.5.6-3,.8-4.5.8Z"/>
+    </g>
+  </g>
+</svg>

resources/profiles/FELIX Printers/FELIX Pro L Series build plate texture.svg

@@ -0,0 +1,28 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<svg id="a" xmlns="http://www.w3.org/2000/svg" width="180.62mm" height="180.62mm" viewBox="0 0 300 400" xmlns:c2pa="http://c2pa.org/manifest">
+  <rect x="0" y="0" width="300" height="400" fill="none"/>
+  <g fill="#ffffff" transform="translate(3,365) scale(0.13)">
+    <g>
+      <path d="M139.4.8l-.2,62c-34.3,0-63.4,21.8-73.2,51.9C26.4,141,.2,187.8.2,241.3H0l.2-101.3C.2,63.1,62.4.8,139.4.8Z"/>
+      <path d="M139.1,92.5l-.8,62.5c-42.6,0-77.1,38.6-77.1,86.3l1-103.9c0-7.9,1.3-15.5,3.6-22.7,21.2-14.1,46.3-22.3,73.2-22.3Z"/>
+      <path d="M65.9,114.7c-2.3,7.2-3.6,14.8-3.6,22.7l-1,103.9H.2c0-53.5,26.3-100.3,65.7-126.6Z"/>
+    </g>
+    <polygon points="202.8 .4 202.8 92.9 226.2 92.9 226.2 56 259.8 56 259.8 36.1 226.2 36.1 226.2 19.4 265.7 19.4 265.7 0 202.8 .4"/>
+    <polygon points="282.3 -.3 282.3 93 346.1 93 346.1 72.4 306.8 72.4 306.8 55.6 341.7 55.6 341.7 36.4 306.5 36.4 306.5 19.6 346.2 19.6 346.2 -.3 282.3 -.3"/>
+    <polygon points="365.9 92.8 429.5 92.8 429.5 70.9 389.6 70.9 389.6 .2 365 .2 365.9 92.8"/>
+    <polygon points="448 0 471.9 0 471.9 92.5 447.5 92.5 448 0"/>
+    <path d="M485.1,92.5s34.7-44.3,33.4-46.5S485.7,0,485.7,0h29l18.4,24.8L550.1,0h26.6l-29.9,45.4,33.1,46.8h-28.8l-19.3-27.4-18.9,28.1-27.9-.4Z"/>
+    <g>
+      <path d="M210.9,154.1c-1.9,0-3.7-.2-5.3-.7-1.6-.4-3-1-4.2-1.6v-3.9c1.1.6,2.4,1.1,3.9,1.6,1.5.5,3.2.7,5.1.7,3.1,0,5.5-.6,7.2-1.7,1.7-1.2,2.5-2.8,2.5-5s-.8-3.9-2.5-5c-1.7-1.2-4.2-1.7-7.4-1.7h-3.9v-3.7h4c2.6,0,4.5-.5,5.9-1.5,1.4-1,2-2.4,2-4.2s-.3-2.3-1-3.1c-.6-.8-1.6-1.5-2.8-1.9-1.3-.4-2.8-.7-4.6-.7s-3,.2-4.3.6c-1.3.4-2.4.8-3.3,1.3v-3.9c1.1-.5,2.3-.9,3.6-1.3,1.3-.4,2.8-.5,4.5-.5s4,.3,5.5.8c1.5.5,2.7,1.3,3.6,2.2.9.9,1.6,1.9,2,3.1.4,1.1.6,2.3.6,3.4s-.2,2.4-.7,3.3c-.5.9-1,1.7-1.6,2.2-.6.6-1.4,1.1-2.3,1.6,1.3.7,2.3,1.4,3.2,2.1s1.6,1.7,2.2,2.8c.6,1.1,1,2.5,1,4.2s-.2,2.5-.7,3.8c-.5,1.2-1.2,2.4-2.2,3.4s-2.4,1.8-4,2.4c-1.7.6-3.7.9-6.1.9Z"/>
+      <path d="M232.1,153.7v-35.4h11.1c5.5,0,9.7,1.5,12.4,4.4,2.8,3,4.2,7.4,4.2,13.2s-1.4,10.3-4.2,13.2c-2.8,3-6.9,4.5-12.4,4.5h-11.1ZM235.9,150h7c4.5,0,7.8-1.1,9.9-3.4,2-2.3,3.1-5.8,3.1-10.7s-1-8.4-3.1-10.7c-2-2.3-5.3-3.4-9.9-3.4h-7v28.2Z"/>
+      <path d="M291.9,154.4c-.8,0-1.7-.1-2.6-.3-1-.2-1.9-.5-2.8-.8-.9-.3-1.7-.7-2.4-1l1.3-1.3v14.2h-3.8v-33.2c0-1.1.3-2,1-2.7.7-.7,1.6-1.2,2.7-1.6,1.1-.4,2.3-.6,3.5-.8,1.2-.2,2.4-.2,3.5-.2,2.1,0,4.1.4,6,1.3,1.9.9,3.4,2.4,4.6,4.5s1.7,5,1.7,8.6-.5,5.1-1.5,7.1c-1,2-2.4,3.5-4.3,4.6-1.9,1.1-4.2,1.6-6.9,1.6ZM291.9,150.9c1.9,0,3.5-.4,4.8-1.2,1.3-.8,2.2-2,2.8-3.5.6-1.5,1-3.2,1-5.1s-.2-3.7-.6-5.4c-.4-1.7-1.2-3-2.4-4-1.2-1-3-1.5-5.2-1.5s-3.4.2-4.8.6c-1.4.4-2,1-2,1.8v16.4c1.1.6,2.2,1.1,3.3,1.4s2.2.5,3.3.5Z"/>
+      <path d="M311.1,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1c-.8,0-1.6.2-2.4.3-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
+      <path d="M330.5,122.5v-4.2h4.2v4.2h-4.2ZM330.8,153.7v-26.4h3.8v26.4h-3.8Z"/>
+      <path d="M342.7,129.3c.8-.4,1.7-.8,2.6-1.1.9-.3,1.8-.6,2.8-.8.9-.2,1.9-.4,2.9-.5,1-.1,2-.2,2.9-.2,2.6,0,4.6.4,6.1,1.1,1.5.8,2.6,1.9,3.3,3.3.7,1.4,1,3.2,1,5.2v17.2h-3.8v-17.2c0-.6,0-1.3-.2-2-.2-.7-.5-1.4-.9-2-.5-.7-1.2-1.2-2.1-1.6s-2.2-.6-3.8-.6-2.2,0-3.4.3-2.4.4-3.6.8v22.4h-3.8v-24.3Z"/>
+      <path d="M380.7,154.1c-1.9,0-3.4-.6-4.7-1.7-1.3-1.1-1.9-2.9-1.9-5.1v-16.5h-4.6v-3.5h4.6v-7.5h3.8v7.5h6.8v3.5h-6.8v15.3c0,1.5.2,2.6.7,3.3s1.4,1.1,2.8,1.1,1.3,0,1.9-.2,1.1-.3,1.5-.5v3.6c-.5.2-1.1.3-1.9.5s-1.5.2-2.1.2Z"/>
+      <path d="M402,154.4c-2.5,0-4.7-.5-6.5-1.6-1.8-1-3.3-2.6-4.2-4.7-1-2.1-1.5-4.7-1.5-7.8,0-4.6,1-8,3.1-10.3,2.1-2.3,4.9-3.4,8.5-3.4s5.1.6,6.8,1.9c1.7,1.3,2.9,3,3.7,5.1.7,2.2,1.1,4.6,1.1,7.3h-21.3l.3-3.5h18.5l-1.5.5c-.1-2.6-.8-4.6-2-5.9-1.2-1.3-3.1-2-5.6-2s-3.2.3-4.3,1c-1.1.6-2,1.7-2.6,3.3s-.8,3.8-.8,6.6.8,5.7,2.3,7.3c1.5,1.7,3.6,2.5,6.3,2.5s2.5,0,3.6-.3,2.1-.5,3-.8c.9-.4,1.7-.7,2.4-1.2v3.9c-1.3.6-2.7,1.1-4.2,1.4-1.5.3-3.2.5-5.1.5Z"/>
+      <path d="M419.5,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1-1.6.2-2.4.3c-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
+      <path d="M446.4,154.4c-1.9,0-3.5-.2-4.8-.6s-2.6-.9-4-1.6v-4c1.1.6,2.1,1.1,2.9,1.5s1.7.7,2.6.9c.9.2,1.9.3,3,.3,1.8,0,3.2-.4,4.3-1.2,1.1-.8,1.7-1.8,1.7-3s-.3-1.7-.8-2.3-1.2-1-2.1-1.3c-.8-.4-1.7-.7-2.7-1.1-1-.3-2.1-.6-3.1-.9-1-.3-2-.8-2.9-1.3-.9-.5-1.6-1.3-2.1-2.1-.5-.9-.8-2-.8-3.4s.3-2.5.8-3.4c.5-1,1.3-1.7,2.1-2.4.9-.6,1.9-1.1,3-1.4,1.1-.3,2.2-.4,3.3-.4,1.6,0,2.9.2,4.1.6,1.1.4,2.3.9,3.5,1.4v3.8c-1.3-.7-2.5-1.3-3.6-1.7-1.1-.4-2.3-.7-3.8-.7s-2.7.3-3.9.9c-1.1.6-1.7,1.5-1.7,2.7s.3,1.8.9,2.4,1.4,1,2.3,1.4c1,.3,2,.7,3.1,1,.9.3,1.8.6,2.8.9,1,.3,1.8.8,2.7,1.3.8.5,1.5,1.3,2,2.1.5.9.8,2,.8,3.4s-.5,3.4-1.4,4.6-2.2,2.1-3.6,2.7c-1.5.6-3,.8-4.5.8Z"/>
+    </g>
+  </g>
+</svg>

resources/profiles/FELIX Printers/FELIX Pro Series build plate texture.svg

@@ -0,0 +1,28 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<svg id="a" xmlns="http://www.w3.org/2000/svg" width="180.62mm" height="180.62mm" viewBox="0 0 235 244" xmlns:c2pa="http://c2pa.org/manifest">
+  <rect x="0" y="0" width="235" height="244" fill="none"/>
+  <g fill="#ffffff" transform="translate(2,215) scale(0.1)">
+    <g>
+      <path d="M139.4.8l-.2,62c-34.3,0-63.4,21.8-73.2,51.9C26.4,141,.2,187.8.2,241.3H0l.2-101.3C.2,63.1,62.4.8,139.4.8Z"/>
+      <path d="M139.1,92.5l-.8,62.5c-42.6,0-77.1,38.6-77.1,86.3l1-103.9c0-7.9,1.3-15.5,3.6-22.7,21.2-14.1,46.3-22.3,73.2-22.3Z"/>
+      <path d="M65.9,114.7c-2.3,7.2-3.6,14.8-3.6,22.7l-1,103.9H.2c0-53.5,26.3-100.3,65.7-126.6Z"/>
+    </g>
+    <polygon points="202.8 .4 202.8 92.9 226.2 92.9 226.2 56 259.8 56 259.8 36.1 226.2 36.1 226.2 19.4 265.7 19.4 265.7 0 202.8 .4"/>
+    <polygon points="282.3 -.3 282.3 93 346.1 93 346.1 72.4 306.8 72.4 306.8 55.6 341.7 55.6 341.7 36.4 306.5 36.4 306.5 19.6 346.2 19.6 346.2 -.3 282.3 -.3"/>
+    <polygon points="365.9 92.8 429.5 92.8 429.5 70.9 389.6 70.9 389.6 .2 365 .2 365.9 92.8"/>
+    <polygon points="448 0 471.9 0 471.9 92.5 447.5 92.5 448 0"/>
+    <path d="M485.1,92.5s34.7-44.3,33.4-46.5S485.7,0,485.7,0h29l18.4,24.8L550.1,0h26.6l-29.9,45.4,33.1,46.8h-28.8l-19.3-27.4-18.9,28.1-27.9-.4Z"/>
+    <g>
+      <path d="M210.9,154.1c-1.9,0-3.7-.2-5.3-.7-1.6-.4-3-1-4.2-1.6v-3.9c1.1.6,2.4,1.1,3.9,1.6,1.5.5,3.2.7,5.1.7,3.1,0,5.5-.6,7.2-1.7,1.7-1.2,2.5-2.8,2.5-5s-.8-3.9-2.5-5c-1.7-1.2-4.2-1.7-7.4-1.7h-3.9v-3.7h4c2.6,0,4.5-.5,5.9-1.5,1.4-1,2-2.4,2-4.2s-.3-2.3-1-3.1c-.6-.8-1.6-1.5-2.8-1.9-1.3-.4-2.8-.7-4.6-.7s-3,.2-4.3.6c-1.3.4-2.4.8-3.3,1.3v-3.9c1.1-.5,2.3-.9,3.6-1.3,1.3-.4,2.8-.5,4.5-.5s4,.3,5.5.8c1.5.5,2.7,1.3,3.6,2.2.9.9,1.6,1.9,2,3.1.4,1.1.6,2.3.6,3.4s-.2,2.4-.7,3.3c-.5.9-1,1.7-1.6,2.2-.6.6-1.4,1.1-2.3,1.6,1.3.7,2.3,1.4,3.2,2.1s1.6,1.7,2.2,2.8c.6,1.1,1,2.5,1,4.2s-.2,2.5-.7,3.8c-.5,1.2-1.2,2.4-2.2,3.4s-2.4,1.8-4,2.4c-1.7.6-3.7.9-6.1.9Z"/>
+      <path d="M232.1,153.7v-35.4h11.1c5.5,0,9.7,1.5,12.4,4.4,2.8,3,4.2,7.4,4.2,13.2s-1.4,10.3-4.2,13.2c-2.8,3-6.9,4.5-12.4,4.5h-11.1ZM235.9,150h7c4.5,0,7.8-1.1,9.9-3.4,2-2.3,3.1-5.8,3.1-10.7s-1-8.4-3.1-10.7c-2-2.3-5.3-3.4-9.9-3.4h-7v28.2Z"/>
+      <path d="M291.9,154.4c-.8,0-1.7-.1-2.6-.3-1-.2-1.9-.5-2.8-.8-.9-.3-1.7-.7-2.4-1l1.3-1.3v14.2h-3.8v-33.2c0-1.1.3-2,1-2.7.7-.7,1.6-1.2,2.7-1.6,1.1-.4,2.3-.6,3.5-.8,1.2-.2,2.4-.2,3.5-.2,2.1,0,4.1.4,6,1.3,1.9.9,3.4,2.4,4.6,4.5s1.7,5,1.7,8.6-.5,5.1-1.5,7.1c-1,2-2.4,3.5-4.3,4.6-1.9,1.1-4.2,1.6-6.9,1.6ZM291.9,150.9c1.9,0,3.5-.4,4.8-1.2,1.3-.8,2.2-2,2.8-3.5.6-1.5,1-3.2,1-5.1s-.2-3.7-.6-5.4c-.4-1.7-1.2-3-2.4-4-1.2-1-3-1.5-5.2-1.5s-3.4.2-4.8.6c-1.4.4-2,1-2,1.8v16.4c1.1.6,2.2,1.1,3.3,1.4s2.2.5,3.3.5Z"/>
+      <path d="M311.1,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1c-.8,0-1.6.2-2.4.3-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
+      <path d="M330.5,122.5v-4.2h4.2v4.2h-4.2ZM330.8,153.7v-26.4h3.8v26.4h-3.8Z"/>
+      <path d="M342.7,129.3c.8-.4,1.7-.8,2.6-1.1.9-.3,1.8-.6,2.8-.8.9-.2,1.9-.4,2.9-.5,1-.1,2-.2,2.9-.2,2.6,0,4.6.4,6.1,1.1,1.5.8,2.6,1.9,3.3,3.3.7,1.4,1,3.2,1,5.2v17.2h-3.8v-17.2c0-.6,0-1.3-.2-2-.2-.7-.5-1.4-.9-2-.5-.7-1.2-1.2-2.1-1.6s-2.2-.6-3.8-.6-2.2,0-3.4.3-2.4.4-3.6.8v22.4h-3.8v-24.3Z"/>
+      <path d="M380.7,154.1c-1.9,0-3.4-.6-4.7-1.7-1.3-1.1-1.9-2.9-1.9-5.1v-16.5h-4.6v-3.5h4.6v-7.5h3.8v7.5h6.8v3.5h-6.8v15.3c0,1.5.2,2.6.7,3.3s1.4,1.1,2.8,1.1,1.3,0,1.9-.2,1.1-.3,1.5-.5v3.6c-.5.2-1.1.3-1.9.5s-1.5.2-2.1.2Z"/>
+      <path d="M402,154.4c-2.5,0-4.7-.5-6.5-1.6-1.8-1-3.3-2.6-4.2-4.7-1-2.1-1.5-4.7-1.5-7.8,0-4.6,1-8,3.1-10.3,2.1-2.3,4.9-3.4,8.5-3.4s5.1.6,6.8,1.9c1.7,1.3,2.9,3,3.7,5.1.7,2.2,1.1,4.6,1.1,7.3h-21.3l.3-3.5h18.5l-1.5.5c-.1-2.6-.8-4.6-2-5.9-1.2-1.3-3.1-2-5.6-2s-3.2.3-4.3,1c-1.1.6-2,1.7-2.6,3.3s-.8,3.8-.8,6.6.8,5.7,2.3,7.3c1.5,1.7,3.6,2.5,6.3,2.5s2.5,0,3.6-.3,2.1-.5,3-.8c.9-.4,1.7-.7,2.4-1.2v3.9c-1.3.6-2.7,1.1-4.2,1.4-1.5.3-3.2.5-5.1.5Z"/>
+      <path d="M419.5,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1-1.6.2-2.4.3c-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
+      <path d="M446.4,154.4c-1.9,0-3.5-.2-4.8-.6s-2.6-.9-4-1.6v-4c1.1.6,2.1,1.1,2.9,1.5s1.7.7,2.6.9c.9.2,1.9.3,3,.3,1.8,0,3.2-.4,4.3-1.2,1.1-.8,1.7-1.8,1.7-3s-.3-1.7-.8-2.3-1.2-1-2.1-1.3c-.8-.4-1.7-.7-2.7-1.1-1-.3-2.1-.6-3.1-.9-1-.3-2-.8-2.9-1.3-.9-.5-1.6-1.3-2.1-2.1-.5-.9-.8-2-.8-3.4s.3-2.5.8-3.4c.5-1,1.3-1.7,2.1-2.4.9-.6,1.9-1.1,3-1.4,1.1-.3,2.2-.4,3.3-.4,1.6,0,2.9.2,4.1.6,1.1.4,2.3.9,3.5,1.4v3.8c-1.3-.7-2.5-1.3-3.6-1.7-1.1-.4-2.3-.7-3.8-.7s-2.7.3-3.9.9c-1.1.6-1.7,1.5-1.7,2.7s.3,1.8.9,2.4,1.4,1,2.3,1.4c1,.3,2,.7,3.1,1,.9.3,1.8.6,2.8.9,1,.3,1.8.8,2.7,1.3.8.5,1.5,1.3,2,2.1.5.9.8,2,.8,3.4s-.5,3.4-1.4,4.6-2.2,2.1-3.6,2.7c-1.5.6-3,.8-4.5.8Z"/>
+    </g>
+  </g>
+</svg>

resources/profiles/FELIX Printers/FELIX Pro XL Series build plate.svg

@@ -0,0 +1,28 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<svg id="a" xmlns="http://www.w3.org/2000/svg" width="180.62mm" height="180.62mm" viewBox="0 0 600 400" xmlns:c2pa="http://c2pa.org/manifest">
+  <rect x="0" y="0" width="600" height="400" fill="none"/>
+  <g fill="#ffffff" transform="translate(4,357) scale(0.16)">
+    <g>
+      <path d="M139.4.8l-.2,62c-34.3,0-63.4,21.8-73.2,51.9C26.4,141,.2,187.8.2,241.3H0l.2-101.3C.2,63.1,62.4.8,139.4.8Z"/>
+      <path d="M139.1,92.5l-.8,62.5c-42.6,0-77.1,38.6-77.1,86.3l1-103.9c0-7.9,1.3-15.5,3.6-22.7,21.2-14.1,46.3-22.3,73.2-22.3Z"/>
+      <path d="M65.9,114.7c-2.3,7.2-3.6,14.8-3.6,22.7l-1,103.9H.2c0-53.5,26.3-100.3,65.7-126.6Z"/>
+    </g>
+    <polygon points="202.8 .4 202.8 92.9 226.2 92.9 226.2 56 259.8 56 259.8 36.1 226.2 36.1 226.2 19.4 265.7 19.4 265.7 0 202.8 .4"/>
+    <polygon points="282.3 -.3 282.3 93 346.1 93 346.1 72.4 306.8 72.4 306.8 55.6 341.7 55.6 341.7 36.4 306.5 36.4 306.5 19.6 346.2 19.6 346.2 -.3 282.3 -.3"/>
+    <polygon points="365.9 92.8 429.5 92.8 429.5 70.9 389.6 70.9 389.6 .2 365 .2 365.9 92.8"/>
+    <polygon points="448 0 471.9 0 471.9 92.5 447.5 92.5 448 0"/>
+    <path d="M485.1,92.5s34.7-44.3,33.4-46.5S485.7,0,485.7,0h29l18.4,24.8L550.1,0h26.6l-29.9,45.4,33.1,46.8h-28.8l-19.3-27.4-18.9,28.1-27.9-.4Z"/>
+    <g>
+      <path d="M210.9,154.1c-1.9,0-3.7-.2-5.3-.7-1.6-.4-3-1-4.2-1.6v-3.9c1.1.6,2.4,1.1,3.9,1.6,1.5.5,3.2.7,5.1.7,3.1,0,5.5-.6,7.2-1.7,1.7-1.2,2.5-2.8,2.5-5s-.8-3.9-2.5-5c-1.7-1.2-4.2-1.7-7.4-1.7h-3.9v-3.7h4c2.6,0,4.5-.5,5.9-1.5,1.4-1,2-2.4,2-4.2s-.3-2.3-1-3.1c-.6-.8-1.6-1.5-2.8-1.9-1.3-.4-2.8-.7-4.6-.7s-3,.2-4.3.6c-1.3.4-2.4.8-3.3,1.3v-3.9c1.1-.5,2.3-.9,3.6-1.3,1.3-.4,2.8-.5,4.5-.5s4,.3,5.5.8c1.5.5,2.7,1.3,3.6,2.2.9.9,1.6,1.9,2,3.1.4,1.1.6,2.3.6,3.4s-.2,2.4-.7,3.3c-.5.9-1,1.7-1.6,2.2-.6.6-1.4,1.1-2.3,1.6,1.3.7,2.3,1.4,3.2,2.1s1.6,1.7,2.2,2.8c.6,1.1,1,2.5,1,4.2s-.2,2.5-.7,3.8c-.5,1.2-1.2,2.4-2.2,3.4s-2.4,1.8-4,2.4c-1.7.6-3.7.9-6.1.9Z"/>
+      <path d="M232.1,153.7v-35.4h11.1c5.5,0,9.7,1.5,12.4,4.4,2.8,3,4.2,7.4,4.2,13.2s-1.4,10.3-4.2,13.2c-2.8,3-6.9,4.5-12.4,4.5h-11.1ZM235.9,150h7c4.5,0,7.8-1.1,9.9-3.4,2-2.3,3.1-5.8,3.1-10.7s-1-8.4-3.1-10.7c-2-2.3-5.3-3.4-9.9-3.4h-7v28.2Z"/>
+      <path d="M291.9,154.4c-.8,0-1.7-.1-2.6-.3-1-.2-1.9-.5-2.8-.8-.9-.3-1.7-.7-2.4-1l1.3-1.3v14.2h-3.8v-33.2c0-1.1.3-2,1-2.7.7-.7,1.6-1.2,2.7-1.6,1.1-.4,2.3-.6,3.5-.8,1.2-.2,2.4-.2,3.5-.2,2.1,0,4.1.4,6,1.3,1.9.9,3.4,2.4,4.6,4.5s1.7,5,1.7,8.6-.5,5.1-1.5,7.1c-1,2-2.4,3.5-4.3,4.6-1.9,1.1-4.2,1.6-6.9,1.6ZM291.9,150.9c1.9,0,3.5-.4,4.8-1.2,1.3-.8,2.2-2,2.8-3.5.6-1.5,1-3.2,1-5.1s-.2-3.7-.6-5.4c-.4-1.7-1.2-3-2.4-4-1.2-1-3-1.5-5.2-1.5s-3.4.2-4.8.6c-1.4.4-2,1-2,1.8v16.4c1.1.6,2.2,1.1,3.3,1.4s2.2.5,3.3.5Z"/>
+      <path d="M311.1,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1c-.8,0-1.6.2-2.4.3-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
+      <path d="M330.5,122.5v-4.2h4.2v4.2h-4.2ZM330.8,153.7v-26.4h3.8v26.4h-3.8Z"/>
+      <path d="M342.7,129.3c.8-.4,1.7-.8,2.6-1.1.9-.3,1.8-.6,2.8-.8.9-.2,1.9-.4,2.9-.5,1-.1,2-.2,2.9-.2,2.6,0,4.6.4,6.1,1.1,1.5.8,2.6,1.9,3.3,3.3.7,1.4,1,3.2,1,5.2v17.2h-3.8v-17.2c0-.6,0-1.3-.2-2-.2-.7-.5-1.4-.9-2-.5-.7-1.2-1.2-2.1-1.6s-2.2-.6-3.8-.6-2.2,0-3.4.3-2.4.4-3.6.8v22.4h-3.8v-24.3Z"/>
+      <path d="M380.7,154.1c-1.9,0-3.4-.6-4.7-1.7-1.3-1.1-1.9-2.9-1.9-5.1v-16.5h-4.6v-3.5h4.6v-7.5h3.8v7.5h6.8v3.5h-6.8v15.3c0,1.5.2,2.6.7,3.3s1.4,1.1,2.8,1.1,1.3,0,1.9-.2,1.1-.3,1.5-.5v3.6c-.5.2-1.1.3-1.9.5s-1.5.2-2.1.2Z"/>
+      <path d="M402,154.4c-2.5,0-4.7-.5-6.5-1.6-1.8-1-3.3-2.6-4.2-4.7-1-2.1-1.5-4.7-1.5-7.8,0-4.6,1-8,3.1-10.3,2.1-2.3,4.9-3.4,8.5-3.4s5.1.6,6.8,1.9c1.7,1.3,2.9,3,3.7,5.1.7,2.2,1.1,4.6,1.1,7.3h-21.3l.3-3.5h18.5l-1.5.5c-.1-2.6-.8-4.6-2-5.9-1.2-1.3-3.1-2-5.6-2s-3.2.3-4.3,1c-1.1.6-2,1.7-2.6,3.3s-.8,3.8-.8,6.6.8,5.7,2.3,7.3c1.5,1.7,3.6,2.5,6.3,2.5s2.5,0,3.6-.3,2.1-.5,3-.8c.9-.4,1.7-.7,2.4-1.2v3.9c-1.3.6-2.7,1.1-4.2,1.4-1.5.3-3.2.5-5.1.5Z"/>
+      <path d="M419.5,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1-1.6.2-2.4.3c-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
+      <path d="M446.4,154.4c-1.9,0-3.5-.2-4.8-.6s-2.6-.9-4-1.6v-4c1.1.6,2.1,1.1,2.9,1.5s1.7.7,2.6.9c.9.2,1.9.3,3,.3,1.8,0,3.2-.4,4.3-1.2,1.1-.8,1.7-1.8,1.7-3s-.3-1.7-.8-2.3-1.2-1-2.1-1.3c-.8-.4-1.7-.7-2.7-1.1-1-.3-2.1-.6-3.1-.9-1-.3-2-.8-2.9-1.3-.9-.5-1.6-1.3-2.1-2.1-.5-.9-.8-2-.8-3.4s.3-2.5.8-3.4c.5-1,1.3-1.7,2.1-2.4.9-.6,1.9-1.1,3-1.4,1.1-.3,2.2-.4,3.3-.4,1.6,0,2.9.2,4.1.6,1.1.4,2.3.9,3.5,1.4v3.8c-1.3-.7-2.5-1.3-3.6-1.7-1.1-.4-2.3-.7-3.8-.7s-2.7.3-3.9.9c-1.1.6-1.7,1.5-1.7,2.7s.3,1.8.9,2.4,1.4,1,2.3,1.4c1,.3,2,.7,3.1,1,.9.3,1.8.6,2.8.9,1,.3,1.8.8,2.7,1.3.8.5,1.5,1.3,2,2.1.5.9.8,2,.8,3.4s-.5,3.4-1.4,4.6-2.2,2.1-3.6,2.7c-1.5.6-3,.8-4.5.8Z"/>
+    </g>
+  </g>
+</svg>

resources/profiles/FELIX Printers/FELIX Tec 4 Series build plate.svg

@@ -0,0 +1,28 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<svg id="a" xmlns="http://www.w3.org/2000/svg" width="180.62mm" height="180.62mm" viewBox="0 0 205 255" xmlns:c2pa="http://c2pa.org/manifest">
+  <rect x="0" y="0" width="205" height="255" fill="none"/>
+  <g fill="#ffffff" transform="translate(3,228) scale(0.1)">
+    <g>
+      <path d="M139.4.8l-.2,62c-34.3,0-63.4,21.8-73.2,51.9C26.4,141,.2,187.8.2,241.3H0l.2-101.3C.2,63.1,62.4.8,139.4.8Z"/>
+      <path d="M139.1,92.5l-.8,62.5c-42.6,0-77.1,38.6-77.1,86.3l1-103.9c0-7.9,1.3-15.5,3.6-22.7,21.2-14.1,46.3-22.3,73.2-22.3Z"/>
+      <path d="M65.9,114.7c-2.3,7.2-3.6,14.8-3.6,22.7l-1,103.9H.2c0-53.5,26.3-100.3,65.7-126.6Z"/>
+    </g>
+    <polygon points="202.8 .4 202.8 92.9 226.2 92.9 226.2 56 259.8 56 259.8 36.1 226.2 36.1 226.2 19.4 265.7 19.4 265.7 0 202.8 .4"/>
+    <polygon points="282.3 -.3 282.3 93 346.1 93 346.1 72.4 306.8 72.4 306.8 55.6 341.7 55.6 341.7 36.4 306.5 36.4 306.5 19.6 346.2 19.6 346.2 -.3 282.3 -.3"/>
+    <polygon points="365.9 92.8 429.5 92.8 429.5 70.9 389.6 70.9 389.6 .2 365 .2 365.9 92.8"/>
+    <polygon points="448 0 471.9 0 471.9 92.5 447.5 92.5 448 0"/>
+    <path d="M485.1,92.5s34.7-44.3,33.4-46.5S485.7,0,485.7,0h29l18.4,24.8L550.1,0h26.6l-29.9,45.4,33.1,46.8h-28.8l-19.3-27.4-18.9,28.1-27.9-.4Z"/>
+    <g>
+      <path d="M210.9,154.1c-1.9,0-3.7-.2-5.3-.7-1.6-.4-3-1-4.2-1.6v-3.9c1.1.6,2.4,1.1,3.9,1.6,1.5.5,3.2.7,5.1.7,3.1,0,5.5-.6,7.2-1.7,1.7-1.2,2.5-2.8,2.5-5s-.8-3.9-2.5-5c-1.7-1.2-4.2-1.7-7.4-1.7h-3.9v-3.7h4c2.6,0,4.5-.5,5.9-1.5,1.4-1,2-2.4,2-4.2s-.3-2.3-1-3.1c-.6-.8-1.6-1.5-2.8-1.9-1.3-.4-2.8-.7-4.6-.7s-3,.2-4.3.6c-1.3.4-2.4.8-3.3,1.3v-3.9c1.1-.5,2.3-.9,3.6-1.3,1.3-.4,2.8-.5,4.5-.5s4,.3,5.5.8c1.5.5,2.7,1.3,3.6,2.2.9.9,1.6,1.9,2,3.1.4,1.1.6,2.3.6,3.4s-.2,2.4-.7,3.3c-.5.9-1,1.7-1.6,2.2-.6.6-1.4,1.1-2.3,1.6,1.3.7,2.3,1.4,3.2,2.1s1.6,1.7,2.2,2.8c.6,1.1,1,2.5,1,4.2s-.2,2.5-.7,3.8c-.5,1.2-1.2,2.4-2.2,3.4s-2.4,1.8-4,2.4c-1.7.6-3.7.9-6.1.9Z"/>
+      <path d="M232.1,153.7v-35.4h11.1c5.5,0,9.7,1.5,12.4,4.4,2.8,3,4.2,7.4,4.2,13.2s-1.4,10.3-4.2,13.2c-2.8,3-6.9,4.5-12.4,4.5h-11.1ZM235.9,150h7c4.5,0,7.8-1.1,9.9-3.4,2-2.3,3.1-5.8,3.1-10.7s-1-8.4-3.1-10.7c-2-2.3-5.3-3.4-9.9-3.4h-7v28.2Z"/>
+      <path d="M291.9,154.4c-.8,0-1.7-.1-2.6-.3-1-.2-1.9-.5-2.8-.8-.9-.3-1.7-.7-2.4-1l1.3-1.3v14.2h-3.8v-33.2c0-1.1.3-2,1-2.7.7-.7,1.6-1.2,2.7-1.6,1.1-.4,2.3-.6,3.5-.8,1.2-.2,2.4-.2,3.5-.2,2.1,0,4.1.4,6,1.3,1.9.9,3.4,2.4,4.6,4.5s1.7,5,1.7,8.6-.5,5.1-1.5,7.1c-1,2-2.4,3.5-4.3,4.6-1.9,1.1-4.2,1.6-6.9,1.6ZM291.9,150.9c1.9,0,3.5-.4,4.8-1.2,1.3-.8,2.2-2,2.8-3.5.6-1.5,1-3.2,1-5.1s-.2-3.7-.6-5.4c-.4-1.7-1.2-3-2.4-4-1.2-1-3-1.5-5.2-1.5s-3.4.2-4.8.6c-1.4.4-2,1-2,1.8v16.4c1.1.6,2.2,1.1,3.3,1.4s2.2.5,3.3.5Z"/>
+      <path d="M311.1,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1c-.8,0-1.6.2-2.4.3-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
+      <path d="M330.5,122.5v-4.2h4.2v4.2h-4.2ZM330.8,153.7v-26.4h3.8v26.4h-3.8Z"/>
+      <path d="M342.7,129.3c.8-.4,1.7-.8,2.6-1.1.9-.3,1.8-.6,2.8-.8.9-.2,1.9-.4,2.9-.5,1-.1,2-.2,2.9-.2,2.6,0,4.6.4,6.1,1.1,1.5.8,2.6,1.9,3.3,3.3.7,1.4,1,3.2,1,5.2v17.2h-3.8v-17.2c0-.6,0-1.3-.2-2-.2-.7-.5-1.4-.9-2-.5-.7-1.2-1.2-2.1-1.6s-2.2-.6-3.8-.6-2.2,0-3.4.3-2.4.4-3.6.8v22.4h-3.8v-24.3Z"/>
+      <path d="M380.7,154.1c-1.9,0-3.4-.6-4.7-1.7-1.3-1.1-1.9-2.9-1.9-5.1v-16.5h-4.6v-3.5h4.6v-7.5h3.8v7.5h6.8v3.5h-6.8v15.3c0,1.5.2,2.6.7,3.3s1.4,1.1,2.8,1.1,1.3,0,1.9-.2,1.1-.3,1.5-.5v3.6c-.5.2-1.1.3-1.9.5s-1.5.2-2.1.2Z"/>
+      <path d="M402,154.4c-2.5,0-4.7-.5-6.5-1.6-1.8-1-3.3-2.6-4.2-4.7-1-2.1-1.5-4.7-1.5-7.8,0-4.6,1-8,3.1-10.3,2.1-2.3,4.9-3.4,8.5-3.4s5.1.6,6.8,1.9c1.7,1.3,2.9,3,3.7,5.1.7,2.2,1.1,4.6,1.1,7.3h-21.3l.3-3.5h18.5l-1.5.5c-.1-2.6-.8-4.6-2-5.9-1.2-1.3-3.1-2-5.6-2s-3.2.3-4.3,1c-1.1.6-2,1.7-2.6,3.3s-.8,3.8-.8,6.6.8,5.7,2.3,7.3c1.5,1.7,3.6,2.5,6.3,2.5s2.5,0,3.6-.3,2.1-.5,3-.8c.9-.4,1.7-.7,2.4-1.2v3.9c-1.3.6-2.7,1.1-4.2,1.4-1.5.3-3.2.5-5.1.5Z"/>
+      <path d="M419.5,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1-1.6.2-2.4.3c-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
+      <path d="M446.4,154.4c-1.9,0-3.5-.2-4.8-.6s-2.6-.9-4-1.6v-4c1.1.6,2.1,1.1,2.9,1.5s1.7.7,2.6.9c.9.2,1.9.3,3,.3,1.8,0,3.2-.4,4.3-1.2,1.1-.8,1.7-1.8,1.7-3s-.3-1.7-.8-2.3-1.2-1-2.1-1.3c-.8-.4-1.7-.7-2.7-1.1-1-.3-2.1-.6-3.1-.9-1-.3-2-.8-2.9-1.3-.9-.5-1.6-1.3-2.1-2.1-.5-.9-.8-2-.8-3.4s.3-2.5.8-3.4c.5-1,1.3-1.7,2.1-2.4.9-.6,1.9-1.1,3-1.4,1.1-.3,2.2-.4,3.3-.4,1.6,0,2.9.2,4.1.6,1.1.4,2.3.9,3.5,1.4v3.8c-1.3-.7-2.5-1.3-3.6-1.7-1.1-.4-2.3-.7-3.8-.7s-2.7.3-3.9.9c-1.1.6-1.7,1.5-1.7,2.7s.3,1.8.9,2.4,1.4,1,2.3,1.4c1,.3,2,.7,3.1,1,.9.3,1.8.6,2.8.9,1,.3,1.8.8,2.7,1.3.8.5,1.5,1.3,2,2.1.5.9.8,2,.8,3.4s-.5,3.4-1.4,4.6-2.2,2.1-3.6,2.7c-1.5.6-3,.8-4.5.8Z"/>
+    </g>
+  </g>
+</svg>

resources/profiles/FELIX Printers/filament/FELIXFood/Food Medium Plastic Syringe @0.50mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Medium Plastic Syringe @0.50mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "IQnumbi0N4BnvMfO",
+	"filament_id": "OFAzgHcF",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 0.50mm nozzle",
+		"FELIX Food Double 0.50mm nozzle",
+		"FELIX Food Switch 0.50mm nozzle"
+	],
+	"filament_diameter": [
+		"31.22"
+	],
+	"filament_flow_ratio": [
+		"1.05"
+	],
+	"filament_retraction_length": [
+		"3.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"6.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"0.75"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"7.2"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Medium Plastic Syringe @1.00mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Medium Plastic Syringe @1.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "p8CG6dHMUxNl7iPL",
+	"filament_id": "OFAzgHcF",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 1.00mm nozzle",
+		"FELIX Food Double 1.00mm nozzle",
+		"FELIX Food Switch 1.00mm nozzle"
+	],
+	"filament_diameter": [
+		"31.22"
+	],
+	"filament_flow_ratio": [
+		"1.05"
+	],
+	"filament_retraction_length": [
+		"3.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"6.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"1.5"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"27.0"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Medium Plastic Syringe @2.00mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Medium Plastic Syringe @2.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "s5uPS7I3E57tiRRC",
+	"filament_id": "OFAzgHcF",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 2.00mm nozzle",
+		"FELIX Food Double 2.00mm nozzle",
+		"FELIX Food Switch 2.00mm nozzle"
+	],
+	"filament_diameter": [
+		"31.22"
+	],
+	"filament_flow_ratio": [
+		"1.05"
+	],
+	"filament_retraction_length": [
+		"3.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"6.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"3.0"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"108.0"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Medium Plastic Syringe @3.00mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Medium Plastic Syringe @3.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "zlZtghh6ytU7N09m",
+	"filament_id": "OFAzgHcF",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 3.00mm nozzle",
+		"FELIX Food Double 3.00mm nozzle",
+		"FELIX Food Switch 3.00mm nozzle"
+	],
+	"filament_diameter": [
+		"31.22"
+	],
+	"filament_flow_ratio": [
+		"1.05"
+	],
+	"filament_retraction_length": [
+		"3.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"6.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"4.5"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"216.0"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Medium Plastic Syringe @4.00mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Medium Plastic Syringe @4.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "fvTZEcREMbs3JW1D",
+	"filament_id": "OFAzgHcF",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 4.00mm nozzle",
+		"FELIX Food Double 4.00mm nozzle",
+		"FELIX Food Switch 4.00mm nozzle"
+	],
+	"filament_diameter": [
+		"31.22"
+	],
+	"filament_flow_ratio": [
+		"1.05"
+	],
+	"filament_retraction_length": [
+		"3.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"6.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"6.0"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"432.0"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Medium Stainless Steel Syringe @0.50mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Medium Stainless Steel Syringe @0.50mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "2XyqnzMqyuRCqpPq",
+	"filament_id": "OFqZSD1S",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 0.50mm nozzle",
+		"FELIX Food Double 0.50mm nozzle",
+		"FELIX Food Switch 0.50mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.05"
+	],
+	"filament_retraction_length": [
+		"1.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"10.0"
+	],
+	"filament_deretraction_speed": [
+		"10.0"
+	],
+	"filament_retract_length_toolchange": [
+		"2.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"0.75"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"7.2"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Medium Stainless Steel Syringe @1.00mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Medium Stainless Steel Syringe @1.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "yNxVUGOb1kUbXLiw",
+	"filament_id": "OFqZSD1S",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 1.00mm nozzle",
+		"FELIX Food Double 1.00mm nozzle",
+		"FELIX Food Switch 1.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.05"
+	],
+	"filament_retraction_length": [
+		"1.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"10.0"
+	],
+	"filament_deretraction_speed": [
+		"10.0"
+	],
+	"filament_retract_length_toolchange": [
+		"2.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"1.5"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"27.0"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Medium Stainless Steel Syringe @2.00mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Medium Stainless Steel Syringe @2.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "4MhgYDnGFKLfurhc",
+	"filament_id": "OFqZSD1S",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 2.00mm nozzle",
+		"FELIX Food Double 2.00mm nozzle",
+		"FELIX Food Switch 2.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.05"
+	],
+	"filament_retraction_length": [
+		"1.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"10.0"
+	],
+	"filament_deretraction_speed": [
+		"10.0"
+	],
+	"filament_retract_length_toolchange": [
+		"2.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"3.0"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"108.0"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Medium Stainless Steel Syringe @3.00mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Medium Stainless Steel Syringe @3.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "mEH3Rgzzwjq9iptd",
+	"filament_id": "OFqZSD1S",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 3.00mm nozzle",
+		"FELIX Food Double 3.00mm nozzle",
+		"FELIX Food Switch 3.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.05"
+	],
+	"filament_retraction_length": [
+		"1.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"10.0"
+	],
+	"filament_deretraction_speed": [
+		"10.0"
+	],
+	"filament_retract_length_toolchange": [
+		"2.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"4.5"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"216.0"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Medium Stainless Steel Syringe @4.00mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Medium Stainless Steel Syringe @4.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "rJsNSIb8w9kOwhwE",
+	"filament_id": "OFqZSD1S",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 4.00mm nozzle",
+		"FELIX Food Double 4.00mm nozzle",
+		"FELIX Food Switch 4.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.05"
+	],
+	"filament_retraction_length": [
+		"1.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"10.0"
+	],
+	"filament_deretraction_speed": [
+		"10.0"
+	],
+	"filament_retract_length_toolchange": [
+		"2.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"6.0"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"432.0"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Thick Stainless Steel Syringe @0.50mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Thick Stainless Steel Syringe @0.50mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "dJzDnkh8Kyn3phhF",
+	"filament_id": "OFjXHG0Z",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 0.50mm nozzle",
+		"FELIX Food Double 0.50mm nozzle",
+		"FELIX Food Switch 0.50mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.02"
+	],
+	"filament_retraction_length": [
+		"2.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"4.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"0.75"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"4.8"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Thick Stainless Steel Syringe @1.00mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Thick Stainless Steel Syringe @1.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "QQi61sD4rX2jELMa",
+	"filament_id": "OFjXHG0Z",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 1.00mm nozzle",
+		"FELIX Food Double 1.00mm nozzle",
+		"FELIX Food Switch 1.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.02"
+	],
+	"filament_retraction_length": [
+		"2.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"4.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"1.5"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"18.0"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Thick Stainless Steel Syringe @2.00mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Thick Stainless Steel Syringe @2.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "KUmfC5HZL2hXPfey",
+	"filament_id": "OFjXHG0Z",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 2.00mm nozzle",
+		"FELIX Food Double 2.00mm nozzle",
+		"FELIX Food Switch 2.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.02"
+	],
+	"filament_retraction_length": [
+		"2.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"4.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"3.0"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"72.0"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Thick Stainless Steel Syringe @3.00mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Thick Stainless Steel Syringe @3.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "0BbaSUre1bztrKB0",
+	"filament_id": "OFjXHG0Z",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 3.00mm nozzle",
+		"FELIX Food Double 3.00mm nozzle",
+		"FELIX Food Switch 3.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.02"
+	],
+	"filament_retraction_length": [
+		"2.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"4.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"4.5"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"144.0"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Thick Stainless Steel Syringe @4.00mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Thick Stainless Steel Syringe @4.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "b179BTbFqjhnsHPT",
+	"filament_id": "OFjXHG0Z",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 4.00mm nozzle",
+		"FELIX Food Double 4.00mm nozzle",
+		"FELIX Food Switch 4.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.02"
+	],
+	"filament_retraction_length": [
+		"2.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"4.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"6.0"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"288.0"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Thin Plastic Syringe @0.50mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Thin Plastic Syringe @0.50mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "dBTTG8HJRYb7GHqy",
+	"filament_id": "OF0kP94Y",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 0.50mm nozzle",
+		"FELIX Food Double 0.50mm nozzle",
+		"FELIX Food Switch 0.50mm nozzle"
+	],
+	"filament_diameter": [
+		"31.22"
+	],
+	"filament_flow_ratio": [
+		"1.1"
+	],
+	"filament_retraction_length": [
+		"0.75"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"1.5"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"0.75"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"10.8"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Thin Plastic Syringe @1.00mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Thin Plastic Syringe @1.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "FITfR7iepAteWuno",
+	"filament_id": "OF0kP94Y",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 1.00mm nozzle",
+		"FELIX Food Double 1.00mm nozzle",
+		"FELIX Food Switch 1.00mm nozzle"
+	],
+	"filament_diameter": [
+		"31.22"
+	],
+	"filament_flow_ratio": [
+		"1.1"
+	],
+	"filament_retraction_length": [
+		"0.75"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"1.5"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"1.5"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"40.5"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Thin Plastic Syringe @2.00mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Thin Plastic Syringe @2.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "i2DZouQfWUnIm4R5",
+	"filament_id": "OF0kP94Y",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 2.00mm nozzle",
+		"FELIX Food Double 2.00mm nozzle",
+		"FELIX Food Switch 2.00mm nozzle"
+	],
+	"filament_diameter": [
+		"31.22"
+	],
+	"filament_flow_ratio": [
+		"1.1"
+	],
+	"filament_retraction_length": [
+		"0.75"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"1.5"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"3.0"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"162.0"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Thin Plastic Syringe @3.00mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Thin Plastic Syringe @3.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "EzV8T0DVT0NRPa7P",
+	"filament_id": "OF0kP94Y",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 3.00mm nozzle",
+		"FELIX Food Double 3.00mm nozzle",
+		"FELIX Food Switch 3.00mm nozzle"
+	],
+	"filament_diameter": [
+		"31.22"
+	],
+	"filament_flow_ratio": [
+		"1.1"
+	],
+	"filament_retraction_length": [
+		"0.75"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"1.5"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"4.5"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"324.0"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Thin Plastic Syringe @4.00mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Thin Plastic Syringe @4.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "Q6msqrC9TM0un5qw",
+	"filament_id": "OF0kP94Y",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 4.00mm nozzle",
+		"FELIX Food Double 4.00mm nozzle",
+		"FELIX Food Switch 4.00mm nozzle"
+	],
+	"filament_diameter": [
+		"31.22"
+	],
+	"filament_flow_ratio": [
+		"1.1"
+	],
+	"filament_retraction_length": [
+		"0.75"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"1.5"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"6.0"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"648.0"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Thin Stainless Steel Syringe @0.50mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Thin Stainless Steel Syringe @0.50mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "I9W6tiEnRSMrkyzl",
+	"filament_id": "OF40XIE8",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 0.50mm nozzle",
+		"FELIX Food Double 0.50mm nozzle",
+		"FELIX Food Switch 0.50mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.1"
+	],
+	"filament_retraction_length": [
+		"0.2"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"10.0"
+	],
+	"filament_deretraction_speed": [
+		"10.0"
+	],
+	"filament_retract_length_toolchange": [
+		"0.4"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"0.75"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"10.8"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Thin Stainless Steel Syringe @1.00mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Thin Stainless Steel Syringe @1.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "PJpJ8TTlDajNrRJo",
+	"filament_id": "OF40XIE8",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 1.00mm nozzle",
+		"FELIX Food Double 1.00mm nozzle",
+		"FELIX Food Switch 1.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.1"
+	],
+	"filament_retraction_length": [
+		"0.2"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"10.0"
+	],
+	"filament_deretraction_speed": [
+		"10.0"
+	],
+	"filament_retract_length_toolchange": [
+		"0.4"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"1.5"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"40.5"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Thin Stainless Steel Syringe @2.00mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Thin Stainless Steel Syringe @2.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "s3GOL7BWdRbaV4GM",
+	"filament_id": "OF40XIE8",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 2.00mm nozzle",
+		"FELIX Food Double 2.00mm nozzle",
+		"FELIX Food Switch 2.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.1"
+	],
+	"filament_retraction_length": [
+		"0.2"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"10.0"
+	],
+	"filament_deretraction_speed": [
+		"10.0"
+	],
+	"filament_retract_length_toolchange": [
+		"0.4"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"3.0"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"162.0"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Thin Stainless Steel Syringe @3.00mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Thin Stainless Steel Syringe @3.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "WKPEMCVctL0c5FFi",
+	"filament_id": "OF40XIE8",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 3.00mm nozzle",
+		"FELIX Food Double 3.00mm nozzle",
+		"FELIX Food Switch 3.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.1"
+	],
+	"filament_retraction_length": [
+		"0.2"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"10.0"
+	],
+	"filament_deretraction_speed": [
+		"10.0"
+	],
+	"filament_retract_length_toolchange": [
+		"0.4"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"4.5"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"324.0"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Thin Stainless Steel Syringe @4.00mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Thin Stainless Steel Syringe @4.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "I5UEkm93zhn9hdMF",
+	"filament_id": "OF40XIE8",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 4.00mm nozzle",
+		"FELIX Food Double 4.00mm nozzle",
+		"FELIX Food Switch 4.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.1"
+	],
+	"filament_retraction_length": [
+		"0.2"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"10.0"
+	],
+	"filament_deretraction_speed": [
+		"10.0"
+	],
+	"filament_retract_length_toolchange": [
+		"0.4"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"6.0"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"648.0"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Very Thick Stainless Steel Syringe @1.00mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Very Thick Stainless Steel Syringe @1.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "OIZKSwXaRY7WZecX",
+	"filament_id": "OF0xT5HR",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 1.00mm nozzle",
+		"FELIX Food Double 1.00mm nozzle",
+		"FELIX Food Switch 1.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_retraction_length": [
+		"2.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"4.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"0.75"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"13.5"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Very Thick Stainless Steel Syringe @2.00mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Very Thick Stainless Steel Syringe @2.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "al27KBjL9MAi3ri9",
+	"filament_id": "OF0xT5HR",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 2.00mm nozzle",
+		"FELIX Food Double 2.00mm nozzle",
+		"FELIX Food Switch 2.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_retraction_length": [
+		"2.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"4.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"1.5"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"53.0"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Very Thick Stainless Steel Syringe @3.00mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Very Thick Stainless Steel Syringe @3.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "42ADzpr7vGuh3AKC",
+	"filament_id": "OF0xT5HR",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 3.00mm nozzle",
+		"FELIX Food Double 3.00mm nozzle",
+		"FELIX Food Switch 3.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_retraction_length": [
+		"2.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"4.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"3.0"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"108.0"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Very Thick Stainless Steel Syringe @4.00mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Very Thick Stainless Steel Syringe @4.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "FpQC7Cf5qnW1E2QO",
+	"filament_id": "OF0xT5HR",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 4.00mm nozzle",
+		"FELIX Food Double 4.00mm nozzle",
+		"FELIX Food Switch 4.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_retraction_length": [
+		"2.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"4.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"4.5"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"216.0"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Very Thin Plastic Syringe @0.50mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Very Thin Plastic Syringe @0.50mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "9OMbRBrVCyDD6A2k",
+	"filament_id": "OF1XcHqz",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 0.50mm nozzle",
+		"FELIX Food Double 0.50mm nozzle",
+		"FELIX Food Switch 0.50mm nozzle"
+	],
+	"filament_diameter": [
+		"31.22"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_retraction_length": [
+		"0.5"
+	],
+	"filament_retract_restart_extra": [
+		"0.03"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"1.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"0.75"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"14.4"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Very Thin Plastic Syringe @1.00mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Very Thin Plastic Syringe @1.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "ukd2jpvA1sHePEfs",
+	"filament_id": "OF1XcHqz",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 1.00mm nozzle",
+		"FELIX Food Double 1.00mm nozzle",
+		"FELIX Food Switch 1.00mm nozzle"
+	],
+	"filament_diameter": [
+		"31.22"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_retraction_length": [
+		"0.5"
+	],
+	"filament_retract_restart_extra": [
+		"0.03"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"1.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"1.5"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"54.0"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Very Thin Plastic Syringe @2.00mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Very Thin Plastic Syringe @2.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "jXkY0MPClCiaCJGC",
+	"filament_id": "OF1XcHqz",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 2.00mm nozzle",
+		"FELIX Food Double 2.00mm nozzle",
+		"FELIX Food Switch 2.00mm nozzle"
+	],
+	"filament_diameter": [
+		"31.22"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_retraction_length": [
+		"0.5"
+	],
+	"filament_retract_restart_extra": [
+		"0.03"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"1.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"3.0"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"218.0"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Very Thin Plastic Syringe @3.00mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Very Thin Plastic Syringe @3.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "jSTp7ePK9UKaNX3S",
+	"filament_id": "OF1XcHqz",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 3.00mm nozzle",
+		"FELIX Food Double 3.00mm nozzle",
+		"FELIX Food Switch 3.00mm nozzle"
+	],
+	"filament_diameter": [
+		"31.22"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_retraction_length": [
+		"0.5"
+	],
+	"filament_retract_restart_extra": [
+		"0.03"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"1.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"4.5"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"432.0"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Very Thin Plastic Syringe @4.00mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Very Thin Plastic Syringe @4.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "q3tLnporrSrlZl6S",
+	"filament_id": "OF1XcHqz",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 4.00mm nozzle",
+		"FELIX Food Double 4.00mm nozzle",
+		"FELIX Food Switch 4.00mm nozzle"
+	],
+	"filament_diameter": [
+		"31.22"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_retraction_length": [
+		"0.5"
+	],
+	"filament_retract_restart_extra": [
+		"0.03"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"1.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"6.0"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"864.0"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Very Thin Stainless Steel Syringe @1.00mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Very Thin Stainless Steel  Syringe  @1.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "ZGtJ5dq6QEFrRzER",
+	"filament_id": "OFJDz9xO",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 1.00mm nozzle",
+		"FELIX Food Double 1.00mm nozzle",
+		"FELIX Food Switch 1.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_retraction_length": [
+		"0.1"
+	],
+	"filament_retract_restart_extra": [
+		"0.03"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"0.2"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.03"
+	],
+	"filament_wipe_distance": [
+		"1.5"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"54.0"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Very Thin Stainless Steel Syringe @2.00mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Very Thin Stainless Steel  Syringe  @2.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "il7EvApOb39ReoAt",
+	"filament_id": "OFJDz9xO",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 2.00mm nozzle",
+		"FELIX Food Double 2.00mm nozzle",
+		"FELIX Food Switch 2.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_retraction_length": [
+		"0.1"
+	],
+	"filament_retract_restart_extra": [
+		"0.03"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"0.2"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.03"
+	],
+	"filament_wipe_distance": [
+		"3.0"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"216.0"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Very Thin Stainless Steel Syringe @3.00mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Very Thin Stainless Steel  Syringe  @3.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "yTSl3aV0S2HD6zPy",
+	"filament_id": "OFJDz9xO",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 3.00mm nozzle",
+		"FELIX Food Double 3.00mm nozzle",
+		"FELIX Food Switch 3.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_retraction_length": [
+		"0.1"
+	],
+	"filament_retract_restart_extra": [
+		"0.03"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"0.2"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.03"
+	],
+	"filament_wipe_distance": [
+		"4.5"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"432.0"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Very Thin Stainless Steel Syringe @4.00mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Very Thin Stainless Steel  Syringe  @4.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "JfnwH4HjP0CQKuyr",
+	"filament_id": "OFJDz9xO",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 4.00mm nozzle",
+		"FELIX Food Double 4.00mm nozzle",
+		"FELIX Food Switch 4.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_retraction_length": [
+		"0.1"
+	],
+	"filament_retract_restart_extra": [
+		"0.03"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"0.2"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.03"
+	],
+	"filament_wipe_distance": [
+		"6.0"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"864.0"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXFood/Food Very Thin Stainless Steel Syringe @0.50mm.json

@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Very Thin Stainless Steel Syringe @0.50mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "mIgwxwB2N67qAhxk",
+	"filament_id": "OFASY29j",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 0.50mm nozzle",
+		"FELIX Food Double 0.50mm nozzle",
+		"FELIX Food Switch 0.50mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_retraction_length": [
+		"0.1"
+	],
+	"filament_retract_restart_extra": [
+		"0.03"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"0.2"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.03"
+	],
+	"filament_wipe_distance": [
+		"0.75"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"14.4"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FELIX FLEX Brass @ 0.35mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX FLEX  Brass @ 0.35mm",
+	"inherits": "fdm_filament_flex",
+	"from": "system",
+	"setting_id": "UXX0sEaoqZvdXwi6",
+	"filament_id": "OFF6vK3j",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.35mm nozzle",
+		"FELIX Pro L 3.0 0.35mm nozzle",
+		"FELIX Pro XL 3.0 0.35mm nozzle",
+		"FELIX Tec 4 0.35mm nozzle"
+	],
+	"nozzle_temperature": [
+		"215.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"215.0"
+	],
+	"hot_plate_temp": [
+		"40.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"cool_plate_temp": [
+		"40.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"eng_plate_temp": [
+		"40.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"textured_plate_temp": [
+		"40.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"2.2"
+	],
+	"filament_retract_speed": [
+		"50.0"
+	],
+	"filament_retraction_speed": [
+		"50.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.05"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"60.0"
+	],
+	"fan_max_speed": [
+		"60.0"
+	],
+	"filament_density": [
+		"1.38"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FELIX FLEX Brass @ 0.50mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX FLEX  Brass @ 0.50mm",
+	"inherits": "fdm_filament_flex",
+	"from": "system",
+	"setting_id": "B4AmHHxdvhsjN34a",
+	"filament_id": "OFF6vK3j",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.50mm nozzle",
+		"FELIX Pro L 3.0 0.50mm nozzle",
+		"FELIX Pro XL 3.0 0.50mm nozzle",
+		"FELIX Tec 4 0.50mm nozzle"
+	],
+	"nozzle_temperature": [
+		"215.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"215.0"
+	],
+	"hot_plate_temp": [
+		"40.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"cool_plate_temp": [
+		"40.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"eng_plate_temp": [
+		"40.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"textured_plate_temp": [
+		"40.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"2.2"
+	],
+	"filament_retract_speed": [
+		"50.0"
+	],
+	"filament_retraction_speed": [
+		"50.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.05"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"60.0"
+	],
+	"fan_max_speed": [
+		"60.0"
+	],
+	"filament_density": [
+		"1.38"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FELIX FLEX Hardened Steel @ 0.25mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX FLEX Hardened Steel @ 0.25mm",
+	"inherits": "fdm_filament_flex",
+	"from": "system",
+	"setting_id": "7z6rkaF5DBbiccZP",
+	"filament_id": "OFSOY4F3",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.25mm nozzle",
+		"FELIX Pro L 3.0 0.25mm nozzle",
+		"FELIX Pro XL 3.0 0.25mm nozzle",
+		"FELIX Tec 4 0.25mm nozzle"
+	],
+	"nozzle_temperature": [
+		"225.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"225.0"
+	],
+	"hot_plate_temp": [
+		"40.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"cool_plate_temp": [
+		"40.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"eng_plate_temp": [
+		"40.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"textured_plate_temp": [
+		"40.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"2.2"
+	],
+	"filament_retract_speed": [
+		"50.0"
+	],
+	"filament_retraction_speed": [
+		"50.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.05"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"60.0"
+	],
+	"fan_max_speed": [
+		"60.0"
+	],
+	"filament_density": [
+		"1.38"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FELIX FLEX Hardened Steel @ 0.35mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX FLEX Hardened Steel @ 0.35mm",
+	"inherits": "fdm_filament_flex",
+	"from": "system",
+	"setting_id": "DJRiMo6Aq0BvhFC9",
+	"filament_id": "OFSOY4F3",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.35mm nozzle",
+		"FELIX Pro L 3.0 0.35mm nozzle",
+		"FELIX Pro XL 3.0 0.35mm nozzle",
+		"FELIX Tec 4 0.35mm nozzle"
+	],
+	"nozzle_temperature": [
+		"225.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"225.0"
+	],
+	"hot_plate_temp": [
+		"40.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"cool_plate_temp": [
+		"40.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"eng_plate_temp": [
+		"40.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"textured_plate_temp": [
+		"40.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"2.2"
+	],
+	"filament_retract_speed": [
+		"50.0"
+	],
+	"filament_retraction_speed": [
+		"50.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.05"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"60.0"
+	],
+	"fan_max_speed": [
+		"60.0"
+	],
+	"filament_density": [
+		"1.38"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FELIX FLEX Hardened Steel @ 0.50mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX FLEX Hardened Steel @ 0.50mm",
+	"inherits": "fdm_filament_flex",
+	"from": "system",
+	"setting_id": "xgFrl1QpyQFFqBYz",
+	"filament_id": "OFSOY4F3",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.50mm nozzle",
+		"FELIX Pro L 3.0 0.50mm nozzle",
+		"FELIX Pro XL 3.0 0.50mm nozzle",
+		"FELIX Tec 4 0.50mm nozzle"
+	],
+	"nozzle_temperature": [
+		"225.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"225.0"
+	],
+	"hot_plate_temp": [
+		"40.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"cool_plate_temp": [
+		"40.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"eng_plate_temp": [
+		"40.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"textured_plate_temp": [
+		"40.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"2.2"
+	],
+	"filament_retract_speed": [
+		"50.0"
+	],
+	"filament_retraction_speed": [
+		"50.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.05"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"60.0"
+	],
+	"fan_max_speed": [
+		"60.0"
+	],
+	"filament_density": [
+		"1.38"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FELIX FLEX Hardened Steel @ 0.70mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX FLEX Hardened Steel @ 0.70mm",
+	"inherits": "fdm_filament_flex",
+	"from": "system",
+	"setting_id": "eZf8u1vzaQbsjyqO",
+	"filament_id": "OFSOY4F3",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.70mm nozzle",
+		"FELIX Pro L 3.0 0.70mm nozzle",
+		"FELIX Pro XL 3.0 0.70mm nozzle",
+		"FELIX Tec 4 0.70mm nozzle"
+	],
+	"nozzle_temperature": [
+		"225.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"225.0"
+	],
+	"hot_plate_temp": [
+		"40.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"cool_plate_temp": [
+		"40.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"eng_plate_temp": [
+		"40.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"textured_plate_temp": [
+		"40.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"40.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"2.2"
+	],
+	"filament_retract_speed": [
+		"50.0"
+	],
+	"filament_retraction_speed": [
+		"50.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.05"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"60.0"
+	],
+	"fan_max_speed": [
+		"60.0"
+	],
+	"filament_density": [
+		"1.38"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FELIX PETG Brass @ 0.35mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX PETG Brass @ 0.35mm",
+	"inherits": "fdm_filament_pet",
+	"from": "system",
+	"setting_id": "KZzk6aIxMvt1JlOR",
+	"filament_id": "OF17qLwN",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.35mm nozzle",
+		"FELIX Pro L 3.0 0.35mm nozzle",
+		"FELIX Pro XL 3.0 0.35mm nozzle",
+		"FELIX Tec 4 0.35mm nozzle"
+	],
+	"nozzle_temperature": [
+		"220.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220.0"
+	],
+	"hot_plate_temp": [
+		"75.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"cool_plate_temp": [
+		"75.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"eng_plate_temp": [
+		"75.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"textured_plate_temp": [
+		"75.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"1.2"
+	],
+	"filament_retract_speed": [
+		"60.0"
+	],
+	"filament_retraction_speed": [
+		"60.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.05"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"60.0"
+	],
+	"fan_max_speed": [
+		"60.0"
+	],
+	"filament_density": [
+		"1.27"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FELIX PETG Brass @ 0.50mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX PETG Brass @ 0.50mm",
+	"inherits": "fdm_filament_pet",
+	"from": "system",
+	"setting_id": "RWPOGeCx1EEYeV8R",
+	"filament_id": "OF17qLwN",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.50mm nozzle",
+		"FELIX Pro L 3.0 0.50mm nozzle",
+		"FELIX Pro XL 3.0 0.50mm nozzle",
+		"FELIX Tec 4 0.50mm nozzle"
+	],
+	"nozzle_temperature": [
+		"220.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220.0"
+	],
+	"hot_plate_temp": [
+		"75.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"cool_plate_temp": [
+		"75.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"eng_plate_temp": [
+		"75.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"textured_plate_temp": [
+		"75.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"1.2"
+	],
+	"filament_retract_speed": [
+		"60.0"
+	],
+	"filament_retraction_speed": [
+		"60.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.05"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"60.0"
+	],
+	"fan_max_speed": [
+		"60.0"
+	],
+	"filament_density": [
+		"1.27"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FELIX PETG Hardened Steel @ 0.25mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX PETG Hardened Steel @ 0.25mm",
+	"inherits": "fdm_filament_pet",
+	"from": "system",
+	"setting_id": "5RK6gGxFKyADXi4x",
+	"filament_id": "OFQo5ZHk",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.25mm nozzle",
+		"FELIX Pro L 3.0 0.25mm nozzle",
+		"FELIX Pro XL 3.0 0.25mm nozzle",
+		"FELIX Tec 4 0.25mm nozzle"
+	],
+	"nozzle_temperature": [
+		"235.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"235.0"
+	],
+	"hot_plate_temp": [
+		"75.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"cool_plate_temp": [
+		"75.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"eng_plate_temp": [
+		"75.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"textured_plate_temp": [
+		"75.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"1.2"
+	],
+	"filament_retract_speed": [
+		"60.0"
+	],
+	"filament_retraction_speed": [
+		"60.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.05"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"60.0"
+	],
+	"fan_max_speed": [
+		"60.0"
+	],
+	"filament_density": [
+		"1.27"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FELIX PETG Hardened Steel @ 0.35mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX PETG Hardened Steel @ 0.35mm",
+	"inherits": "fdm_filament_pet",
+	"from": "system",
+	"setting_id": "rz08j2cn8mlnvAxh",
+	"filament_id": "OFQo5ZHk",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.35mm nozzle",
+		"FELIX Pro L 3.0 0.35mm nozzle",
+		"FELIX Pro XL 3.0 0.35mm nozzle",
+		"FELIX Tec 4 0.35mm nozzle"
+	],
+	"nozzle_temperature": [
+		"235.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"235.0"
+	],
+	"hot_plate_temp": [
+		"75.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"cool_plate_temp": [
+		"75.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"eng_plate_temp": [
+		"75.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"textured_plate_temp": [
+		"75.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"1.2"
+	],
+	"filament_retract_speed": [
+		"60.0"
+	],
+	"filament_retraction_speed": [
+		"60.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.05"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"60.0"
+	],
+	"fan_max_speed": [
+		"60.0"
+	],
+	"filament_density": [
+		"1.27"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FELIX PETG Hardened Steel @ 0.50mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX PETG Hardened Steel @ 0.50mm",
+	"inherits": "fdm_filament_pet",
+	"from": "system",
+	"setting_id": "1xOwhrqAqJVO48d0",
+	"filament_id": "OFQo5ZHk",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.50mm nozzle",
+		"FELIX Pro L 3.0 0.50mm nozzle",
+		"FELIX Pro XL 3.0 0.50mm nozzle",
+		"FELIX Tec 4 0.50mm nozzle"
+	],
+	"nozzle_temperature": [
+		"235.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"235.0"
+	],
+	"hot_plate_temp": [
+		"75.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"cool_plate_temp": [
+		"75.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"eng_plate_temp": [
+		"75.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"textured_plate_temp": [
+		"75.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"1.2"
+	],
+	"filament_retract_speed": [
+		"60.0"
+	],
+	"filament_retraction_speed": [
+		"60.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.05"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"60.0"
+	],
+	"fan_max_speed": [
+		"60.0"
+	],
+	"filament_density": [
+		"1.27"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FELIX PETG Hardened Steel @ 0.70mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX PETG Hardened Steel @ 0.70mm",
+	"inherits": "fdm_filament_pet",
+	"from": "system",
+	"setting_id": "I2QXz0yDQN6ULNeF",
+	"filament_id": "OFQo5ZHk",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.70mm nozzle",
+		"FELIX Pro L 3.0 0.70mm nozzle",
+		"FELIX Pro XL 3.0 0.70mm nozzle",
+		"FELIX Tec 4 0.70mm nozzle"
+	],
+	"nozzle_temperature": [
+		"235.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"235.0"
+	],
+	"hot_plate_temp": [
+		"75.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"cool_plate_temp": [
+		"75.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"eng_plate_temp": [
+		"75.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"textured_plate_temp": [
+		"75.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"75.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"1.2"
+	],
+	"filament_retract_speed": [
+		"60.0"
+	],
+	"filament_retraction_speed": [
+		"60.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.05"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"60.0"
+	],
+	"fan_max_speed": [
+		"60.0"
+	],
+	"filament_density": [
+		"1.27"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FELIX Premium PLA Brass @ 0.35mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX Premium PLA Brass @ 0.35mm",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "6Ax3SY7RI04PcFFJ",
+	"filament_id": "OF8sLgrm",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.35mm nozzle",
+		"FELIX Pro L 3.0 0.35mm nozzle",
+		"FELIX Pro XL 3.0 0.35mm nozzle",
+		"FELIX Tec 4 0.35mm nozzle"
+	],
+	"nozzle_temperature": [
+		"190.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"190.0"
+	],
+	"hot_plate_temp": [
+		"55.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"cool_plate_temp": [
+		"55.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"eng_plate_temp": [
+		"55.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"textured_plate_temp": [
+		"55.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"1.4"
+	],
+	"filament_retract_speed": [
+		"50.0"
+	],
+	"filament_retraction_speed": [
+		"50.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.05"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"100.0"
+	],
+	"fan_max_speed": [
+		"100.0"
+	],
+	"filament_density": [
+		"1.22"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FELIX Premium PLA Brass @ 0.50mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX Premium PLA Brass @ 0.50mm",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "TzRWTEZl14IWlhrc",
+	"filament_id": "OF8sLgrm",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.50mm nozzle",
+		"FELIX Pro L 3.0 0.50mm nozzle",
+		"FELIX Pro XL 3.0 0.50mm nozzle",
+		"FELIX Tec 4 0.50mm nozzle"
+	],
+	"nozzle_temperature": [
+		"190.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"190.0"
+	],
+	"hot_plate_temp": [
+		"55.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"cool_plate_temp": [
+		"55.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"eng_plate_temp": [
+		"55.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"textured_plate_temp": [
+		"55.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"1.4"
+	],
+	"filament_retract_speed": [
+		"50.0"
+	],
+	"filament_retraction_speed": [
+		"50.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.05"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"100.0"
+	],
+	"fan_max_speed": [
+		"100.0"
+	],
+	"filament_density": [
+		"1.22"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FELIX Premium PLA Hardened Steel @ 0.25mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX Premium PLA Hardened Steel @ 0.25mm",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "RtjX1Noxcsnv5cHv",
+	"filament_id": "OFi00jWL",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.25mm nozzle",
+		"FELIX Pro L 3.0 0.25mm nozzle",
+		"FELIX Pro XL 3.0 0.25mm nozzle",
+		"FELIX Tec 4 0.25mm nozzle"
+	],
+	"nozzle_temperature": [
+		"205.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"205.0"
+	],
+	"hot_plate_temp": [
+		"55.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"cool_plate_temp": [
+		"55.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"eng_plate_temp": [
+		"55.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"textured_plate_temp": [
+		"55.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"1.4"
+	],
+	"filament_retract_speed": [
+		"50.0"
+	],
+	"filament_retraction_speed": [
+		"50.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.05"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"100.0"
+	],
+	"fan_max_speed": [
+		"100.0"
+	],
+	"filament_density": [
+		"1.22"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FELIX Premium PLA Hardened Steel @ 0.35mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX Premium PLA Hardened Steel @ 0.35mm",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "aQI8mIoLrX3liAlM",
+	"filament_id": "OFi00jWL",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.35mm nozzle",
+		"FELIX Pro L 3.0 0.35mm nozzle",
+		"FELIX Pro XL 3.0 0.35mm nozzle",
+		"FELIX Tec 4 0.35mm nozzle"
+	],
+	"nozzle_temperature": [
+		"205.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"205.0"
+	],
+	"hot_plate_temp": [
+		"55.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"cool_plate_temp": [
+		"55.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"eng_plate_temp": [
+		"55.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"textured_plate_temp": [
+		"55.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"1.4"
+	],
+	"filament_retract_speed": [
+		"50.0"
+	],
+	"filament_retraction_speed": [
+		"50.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.05"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"100.0"
+	],
+	"fan_max_speed": [
+		"100.0"
+	],
+	"filament_density": [
+		"1.22"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FELIX Premium PLA Hardened Steel @ 0.50mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX Premium PLA Hardened Steel @ 0.50mm",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "pdnfmqbhfYXV8MAj",
+	"filament_id": "OFi00jWL",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.50mm nozzle",
+		"FELIX Pro L 3.0 0.50mm nozzle",
+		"FELIX Pro XL 3.0 0.50mm nozzle",
+		"FELIX Tec 4 0.50mm nozzle"
+	],
+	"nozzle_temperature": [
+		"205.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"205.0"
+	],
+	"hot_plate_temp": [
+		"55.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"cool_plate_temp": [
+		"55.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"eng_plate_temp": [
+		"55.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"textured_plate_temp": [
+		"55.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"1.4"
+	],
+	"filament_retract_speed": [
+		"50.0"
+	],
+	"filament_retraction_speed": [
+		"50.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.05"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"100.0"
+	],
+	"fan_max_speed": [
+		"100.0"
+	],
+	"filament_density": [
+		"1.22"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FELIX Premium PLA Hardened Steel @ 0.70mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX Premium PLA Hardened Steel @ 0.70mm",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "BDxehnk3kKVRlysR",
+	"filament_id": "OFi00jWL",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.70mm nozzle",
+		"FELIX Pro L 3.0 0.70mm nozzle",
+		"FELIX Pro XL 3.0 0.70mm nozzle",
+		"FELIX Tec 4 0.70mm nozzle"
+	],
+	"nozzle_temperature": [
+		"205.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"205.0"
+	],
+	"hot_plate_temp": [
+		"55.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"cool_plate_temp": [
+		"55.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"eng_plate_temp": [
+		"55.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"textured_plate_temp": [
+		"55.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"1.4"
+	],
+	"filament_retract_speed": [
+		"50.0"
+	],
+	"filament_retraction_speed": [
+		"50.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.05"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"100.0"
+	],
+	"fan_max_speed": [
+		"100.0"
+	],
+	"filament_density": [
+		"1.22"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FELIX Wood Brass @ 0.35mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX Wood  Brass @ 0.35mm",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "nRikN9oc1mOeA6dO",
+	"filament_id": "OF7CzDzq",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.35mm nozzle",
+		"FELIX Pro L 3.0 0.35mm nozzle",
+		"FELIX Pro XL 3.0 0.35mm nozzle",
+		"FELIX Tec 4 0.35mm nozzle"
+	],
+	"nozzle_temperature": [
+		"185.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"185.0"
+	],
+	"hot_plate_temp": [
+		"55.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"cool_plate_temp": [
+		"55.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"eng_plate_temp": [
+		"55.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"textured_plate_temp": [
+		"55.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"2.5"
+	],
+	"filament_retract_speed": [
+		"60.0"
+	],
+	"filament_retraction_speed": [
+		"60.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.15"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"100.0"
+	],
+	"fan_max_speed": [
+		"100.0"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FELIX Wood Brass @ 0.50mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX Wood Brass @ 0.50mm",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "SF4eGuHqUCtfEAGy",
+	"filament_id": "OFKwdz3w",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.50mm nozzle",
+		"FELIX Pro L 3.0 0.50mm nozzle",
+		"FELIX Pro XL 3.0 0.50mm nozzle",
+		"FELIX Tec 4 0.50mm nozzle"
+	],
+	"nozzle_temperature": [
+		"185.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"185.0"
+	],
+	"hot_plate_temp": [
+		"55.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"cool_plate_temp": [
+		"55.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"eng_plate_temp": [
+		"55.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"textured_plate_temp": [
+		"55.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"2.5"
+	],
+	"filament_retract_speed": [
+		"60.0"
+	],
+	"filament_retraction_speed": [
+		"60.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.15"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"100.0"
+	],
+	"fan_max_speed": [
+		"100.0"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FELIX Wood Hardened Steel @ 0.25mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX Wood Hardened Steel @ 0.25mm",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "AkZV2IjFVNLytIaY",
+	"filament_id": "OFsMMDMp",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.25mm nozzle",
+		"FELIX Pro L 3.0 0.25mm nozzle",
+		"FELIX Pro XL 3.0 0.25mm nozzle",
+		"FELIX Tec 4 0.25mm nozzle"
+	],
+	"nozzle_temperature": [
+		"200.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"200.0"
+	],
+	"hot_plate_temp": [
+		"55.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"cool_plate_temp": [
+		"55.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"eng_plate_temp": [
+		"55.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"textured_plate_temp": [
+		"55.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"2.5"
+	],
+	"filament_retract_speed": [
+		"60.0"
+	],
+	"filament_retraction_speed": [
+		"60.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.15"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"100.0"
+	],
+	"fan_max_speed": [
+		"100.0"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FELIX Wood Hardened Steel @ 0.35mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX Wood Hardened Steel @ 0.35mm",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "MEGMFP2nv59vZSpf",
+	"filament_id": "OFsMMDMp",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.35mm nozzle",
+		"FELIX Pro L 3.0 0.35mm nozzle",
+		"FELIX Pro XL 3.0 0.35mm nozzle",
+		"FELIX Tec 4 0.35mm nozzle"
+	],
+	"nozzle_temperature": [
+		"200.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"200.0"
+	],
+	"hot_plate_temp": [
+		"55.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"cool_plate_temp": [
+		"55.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"eng_plate_temp": [
+		"55.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"textured_plate_temp": [
+		"55.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"2.5"
+	],
+	"filament_retract_speed": [
+		"60.0"
+	],
+	"filament_retraction_speed": [
+		"60.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.15"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"100.0"
+	],
+	"fan_max_speed": [
+		"100.0"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FELIX Wood Hardened Steel @ 0.50mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX Wood Hardened Steel @ 0.50mm",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "ObSufa3ZQ8tUmJUB",
+	"filament_id": "OFsMMDMp",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.50mm nozzle",
+		"FELIX Pro L 3.0 0.50mm nozzle",
+		"FELIX Pro XL 3.0 0.50mm nozzle",
+		"FELIX Tec 4 0.50mm nozzle"
+	],
+	"nozzle_temperature": [
+		"200.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"200.0"
+	],
+	"hot_plate_temp": [
+		"55.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"cool_plate_temp": [
+		"55.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"eng_plate_temp": [
+		"55.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"textured_plate_temp": [
+		"55.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"2.5"
+	],
+	"filament_retract_speed": [
+		"60.0"
+	],
+	"filament_retraction_speed": [
+		"60.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.15"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"100.0"
+	],
+	"fan_max_speed": [
+		"100.0"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FELIX Wood Hardened Steel @ 0.70mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FELIX Wood Hardened Steel @ 0.70mm",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "LCRYcNn6HN4lviM2",
+	"filament_id": "OFsMMDMp",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.70mm nozzle",
+		"FELIX Pro L 3.0 0.70mm nozzle",
+		"FELIX Pro XL 3.0 0.70mm nozzle",
+		"FELIX Tec 4 0.70mm nozzle"
+	],
+	"nozzle_temperature": [
+		"200.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"200.0"
+	],
+	"hot_plate_temp": [
+		"55.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"cool_plate_temp": [
+		"55.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"eng_plate_temp": [
+		"55.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"textured_plate_temp": [
+		"55.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"2.5"
+	],
+	"filament_retract_speed": [
+		"60.0"
+	],
+	"filament_retraction_speed": [
+		"60.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.15"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"100.0"
+	],
+	"fan_max_speed": [
+		"100.0"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FORMFUTURA AppoloX ASA Brass @ 0.35mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FORMFUTURA AppoloX ASA Brass @ 0.35mm",
+	"inherits": "fdm_filament_asa",
+	"from": "system",
+	"setting_id": "gRmosSxV2WFOgLAa",
+	"filament_id": "OFEUX7D3",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.35mm nozzle",
+		"FELIX Pro L 3.0 0.35mm nozzle",
+		"FELIX Pro XL 3.0 0.35mm nozzle",
+		"FELIX Tec 4 0.35mm nozzle"
+	],
+	"nozzle_temperature": [
+		"235.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"235.0"
+	],
+	"hot_plate_temp": [
+		"90.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"90.0"
+	],
+	"cool_plate_temp": [
+		"90.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"90.0"
+	],
+	"eng_plate_temp": [
+		"90.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"90.0"
+	],
+	"textured_plate_temp": [
+		"90.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"90.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"140"
+	],
+	"filament_retract_length": [
+		"1.4"
+	],
+	"filament_retract_speed": [
+		"50.0"
+	],
+	"filament_retraction_speed": [
+		"50.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"40.0"
+	],
+	"fan_max_speed": [
+		"40.0"
+	],
+	"filament_density": [
+		"1.07"
+	],
+	"filament_vendor": [
+		"FORMFUTURA"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FORMFUTURA AppoloX ASA Brass @ 0.50mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FORMFUTURA AppoloX ASA Brass @ 0.50mm",
+	"inherits": "fdm_filament_asa",
+	"from": "system",
+	"setting_id": "iXdebkq6x0RsCLSh",
+	"filament_id": "OFEUX7D3",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.50mm nozzle",
+		"FELIX Pro L 3.0 0.50mm nozzle",
+		"FELIX Pro XL 3.0 0.50mm nozzle",
+		"FELIX Tec 4 0.50mm nozzle"
+	],
+	"nozzle_temperature": [
+		"235.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"235.0"
+	],
+	"hot_plate_temp": [
+		"90.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"90.0"
+	],
+	"cool_plate_temp": [
+		"90.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"90.0"
+	],
+	"eng_plate_temp": [
+		"90.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"90.0"
+	],
+	"textured_plate_temp": [
+		"90.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"90.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"140"
+	],
+	"filament_retract_length": [
+		"1.4"
+	],
+	"filament_retract_speed": [
+		"50.0"
+	],
+	"filament_retraction_speed": [
+		"50.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"40.0"
+	],
+	"fan_max_speed": [
+		"40.0"
+	],
+	"filament_density": [
+		"1.07"
+	],
+	"filament_vendor": [
+		"FORMFUTURA"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FORMFUTURA AppoloX ASA Hardened Steel @ 0.25mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FORMFUTURA AppoloX ASA Hardened Steel @ 0.25mm",
+	"inherits": "fdm_filament_asa",
+	"from": "system",
+	"setting_id": "vDwvCcVTrlXsApST",
+	"filament_id": "OFguQdOr",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.25mm nozzle",
+		"FELIX Pro L 3.0 0.25mm nozzle",
+		"FELIX Pro XL 3.0 0.25mm nozzle",
+		"FELIX Tec 4 0.25mm nozzle"
+	],
+	"nozzle_temperature": [
+		"245.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"245.0"
+	],
+	"hot_plate_temp": [
+		"90.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"90.0"
+	],
+	"cool_plate_temp": [
+		"90.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"90.0"
+	],
+	"eng_plate_temp": [
+		"90.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"90.0"
+	],
+	"textured_plate_temp": [
+		"90.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"90.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"140"
+	],
+	"filament_retract_length": [
+		"1.4"
+	],
+	"filament_retract_speed": [
+		"50.0"
+	],
+	"filament_retraction_speed": [
+		"50.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"40.0"
+	],
+	"fan_max_speed": [
+		"40.0"
+	],
+	"filament_density": [
+		"1.07"
+	],
+	"filament_vendor": [
+		"FORMFUTURA"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FORMFUTURA AppoloX ASA Hardened Steel @ 0.35mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FORMFUTURA AppoloX ASA Hardened Steel @ 0.35mm",
+	"inherits": "fdm_filament_asa",
+	"from": "system",
+	"setting_id": "WdP7DnbgAI8O4JOR",
+	"filament_id": "OFguQdOr",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.35mm nozzle",
+		"FELIX Pro L 3.0 0.35mm nozzle",
+		"FELIX Pro XL 3.0 0.35mm nozzle",
+		"FELIX Tec 4 0.35mm nozzle"
+	],
+	"nozzle_temperature": [
+		"245.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"245.0"
+	],
+	"hot_plate_temp": [
+		"90.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"90.0"
+	],
+	"cool_plate_temp": [
+		"90.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"90.0"
+	],
+	"eng_plate_temp": [
+		"90.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"90.0"
+	],
+	"textured_plate_temp": [
+		"90.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"90.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"140"
+	],
+	"filament_retract_length": [
+		"1.4"
+	],
+	"filament_retract_speed": [
+		"50.0"
+	],
+	"filament_retraction_speed": [
+		"50.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"40.0"
+	],
+	"fan_max_speed": [
+		"40.0"
+	],
+	"filament_density": [
+		"1.07"
+	],
+	"filament_vendor": [
+		"FORMFUTURA"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FORMFUTURA AppoloX ASA Hardened Steel @ 0.50mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FORMFUTURA AppoloX ASA Hardened Steel @ 0.50mm",
+	"inherits": "fdm_filament_asa",
+	"from": "system",
+	"setting_id": "wwPIQoP8z2kiDq6c",
+	"filament_id": "OFguQdOr",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.50mm nozzle",
+		"FELIX Pro L 3.0 0.50mm nozzle",
+		"FELIX Pro XL 3.0 0.50mm nozzle",
+		"FELIX Tec 4 0.50mm nozzle"
+	],
+	"nozzle_temperature": [
+		"245.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"245.0"
+	],
+	"hot_plate_temp": [
+		"90.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"90.0"
+	],
+	"cool_plate_temp": [
+		"90.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"90.0"
+	],
+	"eng_plate_temp": [
+		"90.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"90.0"
+	],
+	"textured_plate_temp": [
+		"90.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"90.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"140"
+	],
+	"filament_retract_length": [
+		"1.4"
+	],
+	"filament_retract_speed": [
+		"50.0"
+	],
+	"filament_retraction_speed": [
+		"50.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"40.0"
+	],
+	"fan_max_speed": [
+		"40.0"
+	],
+	"filament_density": [
+		"1.07"
+	],
+	"filament_vendor": [
+		"FORMFUTURA"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FORMFUTURA AppoloX ASA Hardened Steel @ 0.70mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FORMFUTURA AppoloX ASA Hardened Steel @ 0.70mm",
+	"inherits": "fdm_filament_asa",
+	"from": "system",
+	"setting_id": "pc50UjGaC3hGbzLo",
+	"filament_id": "OFguQdOr",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.70mm nozzle",
+		"FELIX Pro L 3.0 0.70mm nozzle",
+		"FELIX Pro XL 3.0 0.70mm nozzle",
+		"FELIX Tec 4 0.70mm nozzle"
+	],
+	"nozzle_temperature": [
+		"245.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"245.0"
+	],
+	"hot_plate_temp": [
+		"90.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"90.0"
+	],
+	"cool_plate_temp": [
+		"90.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"90.0"
+	],
+	"eng_plate_temp": [
+		"90.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"90.0"
+	],
+	"textured_plate_temp": [
+		"90.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"90.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"140"
+	],
+	"filament_retract_length": [
+		"1.4"
+	],
+	"filament_retract_speed": [
+		"50.0"
+	],
+	"filament_retraction_speed": [
+		"50.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_flow_ratio": [
+		"0.94"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"40.0"
+	],
+	"fan_max_speed": [
+		"40.0"
+	],
+	"filament_density": [
+		"1.07"
+	],
+	"filament_vendor": [
+		"FORMFUTURA"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FORMFUTURA Aquasolve PVA Brass @ 0.35mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FORMFUTURA Aquasolve PVA Brass @ 0.35mm",
+	"inherits": "fdm_filament_pva",
+	"from": "system",
+	"setting_id": "BJplNxEdFo9WucQi",
+	"filament_id": "OFumEwBr",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.35mm nozzle",
+		"FELIX Pro L 3.0 0.35mm nozzle",
+		"FELIX Pro XL 3.0 0.35mm nozzle",
+		"FELIX Tec 4 0.35mm nozzle"
+	],
+	"nozzle_temperature": [
+		"195.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"195.0"
+	],
+	"hot_plate_temp": [
+		"55.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"cool_plate_temp": [
+		"55.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"eng_plate_temp": [
+		"55.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"textured_plate_temp": [
+		"55.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"2.5"
+	],
+	"filament_retract_speed": [
+		"55.0"
+	],
+	"filament_retraction_speed": [
+		"55.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.2"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"40.0"
+	],
+	"fan_max_speed": [
+		"40.0"
+	],
+	"filament_density": [
+		"1.23"
+	],
+	"filament_vendor": [
+		"FORMFUTURA"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FORMFUTURA Aquasolve PVA Brass @ 0.50mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FORMFUTURA Aquasolve PVA Brass @ 0.50mm",
+	"inherits": "fdm_filament_pva",
+	"from": "system",
+	"setting_id": "EcGwm5A12REi6etq",
+	"filament_id": "OFumEwBr",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.50mm nozzle",
+		"FELIX Pro L 3.0 0.50mm nozzle",
+		"FELIX Pro XL 3.0 0.50mm nozzle",
+		"FELIX Tec 4 0.50mm nozzle"
+	],
+	"nozzle_temperature": [
+		"195.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"195.0"
+	],
+	"hot_plate_temp": [
+		"55.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"cool_plate_temp": [
+		"55.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"eng_plate_temp": [
+		"55.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"textured_plate_temp": [
+		"55.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"2.5"
+	],
+	"filament_retract_speed": [
+		"55.0"
+	],
+	"filament_retraction_speed": [
+		"55.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.2"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"40.0"
+	],
+	"fan_max_speed": [
+		"40.0"
+	],
+	"filament_density": [
+		"1.23"
+	],
+	"filament_vendor": [
+		"FORMFUTURA"
+	]
+}

resources/profiles/FELIX Printers/filament/FELIXPlastic/FORMFUTURA Aquasolve PVA Hardened Steel @ 0.25mm.json

@@ -0,0 +1,81 @@
+{
+	"type": "filament",
+	"name": "FORMFUTURA Aquasolve PVA Hardened Steel @ 0.25mm",
+	"inherits": "fdm_filament_pva",
+	"from": "system",
+	"setting_id": "Dd4dc8lFUOaswJKt",
+	"filament_id": "OFQ3GEWL",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Pro 3 0.25mm nozzle",
+		"FELIX Pro L 3.0 0.25mm nozzle",
+		"FELIX Pro XL 3.0 0.25mm nozzle",
+		"FELIX Tec 4 0.25mm nozzle"
+	],
+	"nozzle_temperature": [
+		"205.0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"205.0"
+	],
+	"hot_plate_temp": [
+		"55.0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"cool_plate_temp": [
+		"55.0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"eng_plate_temp": [
+		"55.0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"textured_plate_temp": [
+		"55.0"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55.0"
+	],
+	"chamber_temperature": [
+		"28.0"
+	],
+	"idle_temperature": [
+		"120"
+	],
+	"filament_retract_length": [
+		"2.5"
+	],
+	"filament_retract_speed": [
+		"55.0"
+	],
+	"filament_retraction_speed": [
+		"55.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.2"
+	],
+	"filament_flow_ratio": [
+		"1.0"
+	],
+	"filament_max_volumetric_speed": [
+		"12.0"
+	],
+	"fan_min_speed": [
+		"40.0"
+	],
+	"fan_max_speed": [
+		"40.0"
+	],
+	"filament_density": [
+		"1.23"
+	],
+	"filament_vendor": [
+		"FORMFUTURA"
+	]
+}