Preserve disabled filament overrides (nil) through cloud sync

fix: crash in Measure tool when a plain edge is the first selection (#14538 )
* fix: crash in Measure tool when a plain edge is the first selection The SPHERE_2 gripper raycaster called get_feature_offset() on .first.feature instead of .second.feature (copy-pasted from the SPHERE_1 block). Plain planar-border edges store no extra point, so the Edge branch dereferenced an empty optional behind a release-stripped assert, aborting on Flatpak and undefined behavior elsewhere. Point the SPHERE_2 raycaster at .second.feature and fall the Edge branch back to the edge midpoint. Fixes #14018
2026-07-04 01:20:57 +00:00 · 2026-07-03 08:46:52 +02:00 · 2026-07-03 11:29:28 +08:00 · 2026-07-03 00:14:32 +08:00 · 2026-07-03 00:08:15 +08:00 · 2026-07-02 23:51:55 +08:00
156 changed files with 11495 additions and 6883 deletions
--- a/.github/workflows/auto-close-duplicates.yml
+++ b/.github/workflows/auto-close-duplicates.yml
@@ -15,7 +15,7 @@ jobs:

    steps:
      - name: Checkout repository
-        uses: actions/checkout@v6
+        uses: actions/checkout@v7

      - name: Setup Bun
        uses: oven-sh/setup-bun@v2
--- a/.github/workflows/backfill-duplicate-comments.yml
+++ b/.github/workflows/backfill-duplicate-comments.yml
@@ -29,7 +29,7 @@ jobs:

    steps:
      - name: Checkout repository
-        uses: actions/checkout@v6
+        uses: actions/checkout@v7
      
      - name: Setup Bun
        uses: oven-sh/setup-bun@v2
--- a/.github/workflows/build_all.yml
+++ b/.github/workflows/build_all.yml
@@ -131,7 +131,7 @@ jobs:
    if: ${{ !cancelled() && success() }}
    steps:
      - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v7
        with:
          sparse-checkout: |
            .github
@@ -204,7 +204,7 @@ jobs:
    - name: "Remove unneeded stuff to free disk space"
      run:
        rm -rf /usr/local/lib/android/* /usr/share/dotnet/* /opt/ghc1/* "/usr/local/share/boost1/*" /opt/hostedtoolcache1/*
-    - uses: actions/checkout@v6
+    - uses: actions/checkout@v7
    - name: Get the version and date
      run: |
        ver_pure=$(grep 'set(SoftFever_VERSION' version.inc | cut -d '"' -f2)
@@ -223,14 +223,14 @@ jobs:
    # Manage flatpak-builder cache externally so PRs restore but never upload
    - name: Restore flatpak-builder cache
      if: github.event_name == 'pull_request'
-      uses: actions/cache/restore@v5
+      uses: actions/cache/restore@v6
      with:
        path: .flatpak-builder
        key: flatpak-builder-${{ matrix.variant.arch }}-${{ github.event.pull_request.base.sha }}
        restore-keys: flatpak-builder-${{ matrix.variant.arch }}-
    - name: Save/restore flatpak-builder cache
      if: github.event_name != 'pull_request'
-      uses: actions/cache@v5
+      uses: actions/cache@v6
      with:
        path: .flatpak-builder
        key: flatpak-builder-${{ matrix.variant.arch }}-${{ github.sha }}
--- a/.github/workflows/build_check_cache.yml
+++ b/.github/workflows/build_check_cache.yml
@@ -26,7 +26,7 @@ jobs:
      valid-cache: ${{ steps.cache_deps.outputs.cache-hit }}
    steps:
      - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v7
        with:
          lfs: 'false'
        
@@ -46,7 +46,7 @@ jobs:
            
      - name: load cache
        id: cache_deps
-        uses: actions/cache@v5
+        uses: actions/cache@v6
        with:
          path: ${{ steps.set_outputs.outputs.cache-path }}
          key: ${{ steps.set_outputs.outputs.cache-key }}
--- a/.github/workflows/build_deps.yml
+++ b/.github/workflows/build_deps.yml
@@ -34,12 +34,12 @@ jobs:

      # Setup the environment
      - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v7
        with:
          lfs: 'false'

      - name: load cached deps
-        uses: actions/cache@v5
+        uses: actions/cache@v6
        with:
          path: ${{ inputs.cache-path }}
          key: ${{ inputs.cache-key }}
--- a/.github/workflows/build_orca.yml
+++ b/.github/workflows/build_orca.yml
@@ -37,13 +37,13 @@ jobs:

    steps:
      - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v7
        with:
          lfs: 'false'

      - name: load cached deps
        if: ${{ !(runner.os == 'macOS' && inputs.macos-combine-only) }}
-        uses: actions/cache@v5
+        uses: actions/cache@v6
        with:
          path: ${{ inputs.cache-path }}
          key: ${{ inputs.cache-key }}
--- a/.github/workflows/check_locale.yml
+++ b/.github/workflows/check_locale.yml
@@ -14,7 +14,7 @@ jobs:
    runs-on: ubuntu-latest
    steps:  
      - name: Checkout repository
-        uses: actions/checkout@v6
+        uses: actions/checkout@v7

      - name: Install gettext 
        run: |
--- a/.github/workflows/check_profiles.yml
+++ b/.github/workflows/check_profiles.yml
@@ -24,7 +24,7 @@ jobs:
    runs-on: ubuntu-24.04
    steps:
      - name: Checkout repository
-        uses: actions/checkout@v6
+        uses: actions/checkout@v7

      - name: Run extra JSON check
        id: extra_json_check
@@ -41,7 +41,7 @@ jobs:
          curl -L -o OrcaSlicer_profile_validator https://github.com/OrcaSlicer/OrcaSlicer/releases/download/nightly-builds/OrcaSlicer_profile_validator_Linux_Ubuntu2404_nightly
          chmod +x ./OrcaSlicer_profile_validator

-      # Validate all system profiles.
+      # validate profiles
      - name: validate system profiles
        id: validate_system
        continue-on-error: true
@@ -57,17 +57,121 @@ jobs:
          set +e
          ./OrcaSlicer_profile_validator -p ${{ github.workspace }}/resources/profiles -l 2 -v BBL -f 2>&1 | tee ${{ runner.temp }}/validate_filament_subtypes.log
          exit ${PIPESTATUS[0]}
+      # Flag inherits/compatible_printers/compatible_prints references that point at a deleted or
+      # renamed preset. Opt-in per vendor for now (via -r); enabled for BBL and Qidi until other
+      # vendors' profiles are cleaned up. Runs before the custom-preset injection below.
+      - name: validate preset references for BBL and Qidi profiles
+        id: validate_preset_references
+        continue-on-error: true
+        run: |
+          set +e
+          rc=0
+          for v in BBL Qidi; do
+            ./OrcaSlicer_profile_validator -p ${{ github.workspace }}/resources/profiles -l 2 -v "$v" -r 2>&1 | tee -a ${{ runner.temp }}/validate_preset_references.log
+            [ ${PIPESTATUS[0]} -ne 0 ] && rc=1
+          done
+          exit $rc

      - name: validate custom presets
        id: validate_custom
        continue-on-error: true
        working-directory: ${{ github.workspace }}
        run: |
-          set +e
-          curl -LJO https://github.com/OrcaSlicer/OrcaSlicer/releases/download/nightly-builds/orca_custom_preset_tests.zip
-          unzip -q ./orca_custom_preset_tests.zip -d ${{ github.workspace }}/resources/profiles
-          ./OrcaSlicer_profile_validator -p ${{ github.workspace }}/resources/profiles -l 2 2>&1 | tee ${{ runner.temp }}/validate_custom.log
-          exit ${PIPESTATUS[0]}
+          fixtures_dir="${{ runner.temp }}/profile-fixtures"
+          output_dir="${{ runner.temp }}/custom-preset-validation"
+          combined_log="${{ runner.temp }}/validate_custom.log"
+          summary="${output_dir}/summary.md"
+          release_url="https://github.com/OrcaSlicer/OrcaSlicer-profile-validator/releases/download/fixture-archive"
+
+          rm -rf "${fixtures_dir}" "${output_dir}"
+          mkdir -p "${fixtures_dir}" "${output_dir}"
+
+          curl -fsSL -o "${fixtures_dir}/manifest.json" "${release_url}/manifest.json"
+
+          MANIFEST_PATH="${fixtures_dir}/manifest.json" python3 <<'PY' > "${fixtures_dir}/fixtures.tsv"
+          import json
+          import os
+
+          with open(os.environ["MANIFEST_PATH"], encoding="utf-8") as fh:
+              manifest = json.load(fh)
+
+          if isinstance(manifest, dict):
+              entries = manifest.get("fixtures", [])
+          else:
+              entries = manifest
+
+          for entry in entries:
+              version = entry.get("version", "")
+              asset = entry.get("asset", "")
+              sha256 = entry.get("asset_sha256", "")
+              if not version or not asset:
+                  continue
+              print(f"{version}\t{asset}\t{sha256}")
+          PY
+
+          if [ ! -s "${fixtures_dir}/fixtures.tsv" ]; then
+            echo "No custom preset fixtures found in ${release_url}/manifest.json" | tee "${combined_log}"
+            exit 1
+          fi
+
+          {
+            echo "## Custom Preset Fixture Validation"
+            echo ""
+            echo "| Version | Status | Log |"
+            echo "| --- | --- | --- |"
+          } > "${summary}"
+
+          status=0
+          failed_logs=()
+
+          while IFS=$'\t' read -r version asset expected_sha256; do
+            fixture_zip="${fixtures_dir}/${asset}"
+            asset_url_name="$(python3 -c 'import sys, urllib.parse; print(urllib.parse.quote(sys.argv[1], safe=""))' "${asset}")"
+            profile_tree="${output_dir}/profiles-${version}"
+            log_path="${output_dir}/${version}.log"
+
+            curl -fsSL -o "${fixture_zip}" "${release_url}/${asset_url_name}"
+
+            if [ -n "${expected_sha256}" ] && [ "${expected_sha256}" != "<sha256>" ]; then
+              echo "${expected_sha256}  ${fixture_zip}" | sha256sum -c -
+            fi
+
+            rm -rf "${profile_tree}"
+            mkdir -p "${profile_tree}"
+            cp -a "${{ github.workspace }}/resources/profiles/." "${profile_tree}/"
+            rm -rf "${profile_tree}/user"
+            unzip -q "${fixture_zip}" -d "${profile_tree}"
+
+            set +e
+            ./OrcaSlicer_profile_validator -p "${profile_tree}" -l 2 > "${log_path}" 2>&1
+            result=$?
+            set -e
+
+            if [ "${result}" -eq 0 ]; then
+              echo "| ${version} | PASS | ${version}.log |" >> "${summary}"
+            else
+              echo "| ${version} | FAIL | ${version}.log |" >> "${summary}"
+              failed_logs+=("${log_path}")
+              status=1
+            fi
+          done < "${fixtures_dir}/fixtures.tsv"
+
+          {
+            cat "${summary}"
+            if [ "${#failed_logs[@]}" -gt 0 ]; then
+              echo ""
+              echo "## Failed Fixture Logs"
+              for log_path in "${failed_logs[@]}"; do
+                echo ""
+                echo "### $(basename "${log_path}" .log)"
+                echo '```'
+                head -c 12000 "${log_path}" || echo "No output captured"
+                echo '```'
+              done
+            fi
+          } | tee "${combined_log}"
+
+          exit "${status}"

      - name: Prepare PR number for comment workflow
        if: ${{ always() && github.event_name == 'pull_request' }}
@@ -76,7 +180,7 @@ jobs:
          echo "${{ github.event.pull_request.number }}" > ${{ runner.temp }}/profile-check-results/pr_number.txt

      - name: Prepare comment artifact
-        if: ${{ always() && github.event_name == 'pull_request' && (steps.extra_json_check.outcome == 'failure' || steps.validate_system.outcome == 'failure' || steps.validate_filament_subtypes.outcome == 'failure' || steps.validate_custom.outcome == 'failure') }}
+        if: ${{ always() && github.event_name == 'pull_request' && (steps.extra_json_check.outcome == 'failure' || steps.validate_system.outcome == 'failure' || steps.validate_filament_subtypes.outcome == 'failure' || steps.validate_preset_references.outcome == 'failure' || steps.validate_custom.outcome == 'failure') }}
        run: |
          {
            # Marker matched by check_profiles_comment.yml to delete prior comments.
@@ -111,6 +215,15 @@ jobs:
              echo ""
            fi

+            if [ "${{ steps.validate_preset_references.outcome }}" = "failure" ]; then
+              echo "### BBL/Qidi Preset Reference Validation Failed"
+              echo ""
+              echo '```'
+              head -c 30000 ${{ runner.temp }}/validate_preset_references.log || echo "No output captured"
+              echo '```'
+              echo ""
+            fi
+
            if [ "${{ steps.validate_custom.outcome }}" = "failure" ]; then
              echo "### Custom Preset Validation Failed"
              echo ""
@@ -133,7 +246,7 @@ jobs:
          retention-days: 1

      - name: Fail if any check failed
-        if: ${{ always() && (steps.extra_json_check.outcome == 'failure' || steps.validate_system.outcome == 'failure' || steps.validate_filament_subtypes.outcome == 'failure' || steps.validate_custom.outcome == 'failure') }}
+        if: ${{ always() && (steps.extra_json_check.outcome == 'failure' || steps.validate_system.outcome == 'failure' || steps.validate_filament_subtypes.outcome == 'failure' || steps.validate_preset_references.outcome == 'failure' || steps.validate_custom.outcome == 'failure') }}
        run: |
          echo "One or more profile checks failed. See above for details."
          exit 1
--- a/.github/workflows/dedupe-issues.yml
+++ b/.github/workflows/dedupe-issues.yml
@@ -20,7 +20,7 @@ jobs:

    steps:
      - name: Checkout repository
-        uses: actions/checkout@v6
+        uses: actions/checkout@v7

      - name: Run Claude Code slash command
        uses: anthropics/claude-code-base-action@beta
--- a/.github/workflows/doxygen-docs.yml
+++ b/.github/workflows/doxygen-docs.yml
@@ -26,7 +26,7 @@ jobs:
          remove-existing-swap-files: true

      - name: Checkout repository
-        uses: actions/checkout@v6
+        uses: actions/checkout@v7

      - name: Install Doxygen and Graphviz
        run: |
--- a/.github/workflows/shellcheck.yml
+++ b/.github/workflows/shellcheck.yml
@@ -21,7 +21,7 @@ jobs:
    steps:
      - name: Cache shellcheck download
        id: cache-shellcheck-v0_11
-        uses: actions/cache@v5
+        uses: actions/cache@v6
        with:
          path: ~/shellcheck
          key: ${{ runner.os }}-shellcheck-v0_11
@@ -36,7 +36,7 @@ jobs:
          tar -xvf ~/sc.tar.xz -C ~
          mv ~/shellcheck-"${INPUT_VERSION}"/shellcheck ~/shellcheck

-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v7
        with:
          fetch-depth: 1

--- a/.github/workflows/update-translation.yml
+++ b/.github/workflows/update-translation.yml
@@ -10,7 +10,7 @@ jobs:
    runs-on: ubuntu-latest
    steps:  
      - name: Checkout repository
-        uses: actions/checkout@v6
+        uses: actions/checkout@v7

      - name: Setup Python
        uses: actions/setup-python@v6
--- a/localization/i18n/lt/OrcaSlicer_lt.po
+++ b/localization/i18n/lt/OrcaSlicer_lt.po
--- a/resources/profiles/Afinia.json
+++ b/resources/profiles/Afinia.json
@@ -1,6 +1,6 @@
 {
 	"name": "Afinia",
-	"version": "02.04.00.02",
+	"version": "02.04.00.01",
 	"force_update": "0",
 	"description": "Afinia configurations",
 	"machine_model_list": [
@@ -124,6 +124,14 @@
 			"name": "fdm_filament_tpu",
 			"sub_path": "filament/fdm_filament_tpu.json"
 		},
+		{
+			"name": "Afinia ABS",
+			"sub_path": "filament/Afinia ABS.json"
+		},
+		{
+			"name": "Afinia ABS+",
+			"sub_path": "filament/Afinia ABS+.json"
+		},
 		{
 			"name": "Afinia ABS+@HS",
 			"sub_path": "filament/Afinia ABS+@HS.json"
@@ -132,18 +140,34 @@
 			"name": "Afinia ABS@HS",
 			"sub_path": "filament/Afinia ABS@HS.json"
 		},
+		{
+			"name": "Afinia Value ABS",
+			"sub_path": "filament/Afinia Value ABS.json"
+		},
 		{
 			"name": "Afinia Value ABS@HS",
 			"sub_path": "filament/Afinia Value ABS@HS.json"
 		},
+		{
+			"name": "Afinia PLA",
+			"sub_path": "filament/Afinia PLA.json"
+		},
 		{
 			"name": "Afinia PLA@HS",
 			"sub_path": "filament/Afinia PLA@HS.json"
 		},
+		{
+			"name": "Afinia Value PLA",
+			"sub_path": "filament/Afinia Value PLA.json"
+		},
 		{
 			"name": "Afinia Value PLA@HS",
 			"sub_path": "filament/Afinia Value PLA@HS.json"
 		},
+		{
+			"name": "Afinia TPU",
+			"sub_path": "filament/Afinia TPU.json"
+		},
 		{
 			"name": "Afinia TPU@HS",
 			"sub_path": "filament/Afinia TPU@HS.json"
--- a/resources/profiles/Afinia/filament/Afinia
+++ b/resources/profiles/Afinia/filament/Afinia
@@ -0,0 +1,37 @@
+{
+	"type": "filament",
+	"filament_id": "GFB00",
+	"setting_id": "i5tf9foHnTVNmA2r",
+	"name": "Afinia ABS+",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_filament_abs",
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_cost": [
+		"24.99"
+	],
+	"filament_vendor": [
+		"Afinia"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"filament_max_volumetric_speed": [
+		"16"
+	],
+	"nozzle_temperature": [
+		"275"
+	],
+	"nozzle_temperature_initial_layer": [
+		"275"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"compatible_printers": [
+		"Afinia H400 Pro 0.4 nozzle",
+		"Afinia H400 Pro 0.6 nozzle"
+	]
+}
--- a/resources/profiles/Afinia/filament/Afinia
+++ b/resources/profiles/Afinia/filament/Afinia
@@ -0,0 +1,31 @@
+{
+	"type": "filament",
+	"filament_id": "GFB00",
+	"setting_id": "LhDHvMepbh8ecfQT",
+	"name": "Afinia ABS",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_filament_abs",
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_cost": [
+		"24.99"
+	],
+	"filament_vendor": [
+		"Afinia"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"filament_max_volumetric_speed": [
+		"16"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"compatible_printers": [
+		"Afinia H400 Pro 0.4 nozzle",
+		"Afinia H400 Pro 0.6 nozzle"
+	]
+}
--- a/resources/profiles/Afinia/filament/Afinia
+++ b/resources/profiles/Afinia/filament/Afinia
@@ -0,0 +1,34 @@
+{
+	"type": "filament",
+	"filament_id": "GFA00",
+	"setting_id": "1qEFsay7kjYIUkpG",
+	"name": "Afinia PLA",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_filament_pla",
+	"filament_cost": [
+		"24.99"
+	],
+	"filament_density": [
+		"1.26"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"21"
+	],
+	"filament_vendor": [
+		"Afinia"
+	],
+	"filament_long_retractions_when_cut": [
+		"1"
+	],
+	"filament_retraction_distances_when_cut": [
+		"18"
+	],
+	"compatible_printers": [
+		"Afinia H400 Pro 0.4 nozzle",
+		"Afinia H400 Pro 0.6 nozzle"
+	]
+}
--- a/resources/profiles/Afinia/filament/Afinia
+++ b/resources/profiles/Afinia/filament/Afinia
@@ -0,0 +1,28 @@
+{
+	"type": "filament",
+	"name": "Afinia TPU",
+	"inherits": "fdm_filament_tpu",
+	"from": "system",
+	"setting_id": "E7WBTARZ971LaDMj",
+	"filament_id": "GFU01",
+	"instantiation": "true",
+	"filament_vendor": [
+		"Afinia"
+	],
+	"filament_density": [
+		"1.22"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"filament_cost": [
+		"41.99"
+	],
+	"nozzle_temperature": [
+		"230"
+	],
+	"compatible_printers": [
+		"Afinia H400 Pro 0.4 nozzle",
+		"Afinia H400 Pro 0.6 nozzle"
+	]
+}
--- a/resources/profiles/Afinia/filament/Afinia
+++ b/resources/profiles/Afinia/filament/Afinia
@@ -0,0 +1,37 @@
+{
+	"type": "filament",
+	"filament_id": "GFB00",
+	"setting_id": "jEYVpOPBjFtQ0DXn",
+	"name": "Afinia Value ABS",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_filament_abs",
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_cost": [
+		"24.99"
+	],
+	"filament_vendor": [
+		"Afinia"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"filament_max_volumetric_speed": [
+		"16"
+	],
+	"nozzle_temperature": [
+		"245"
+	],
+	"nozzle_temperature_initial_layer": [
+		"245"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"compatible_printers": [
+		"Afinia H400 Pro 0.4 nozzle",
+		"Afinia H400 Pro 0.6 nozzle"
+	]
+}
--- a/resources/profiles/Afinia/filament/Afinia
+++ b/resources/profiles/Afinia/filament/Afinia
@@ -0,0 +1,40 @@
+{
+	"type": "filament",
+	"filament_id": "GFA00",
+	"setting_id": "oNBk0IxmW7C99WI3",
+	"name": "Afinia Value PLA",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_filament_pla",
+	"filament_cost": [
+		"24.99"
+	],
+	"filament_density": [
+		"1.26"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"21"
+	],
+	"filament_vendor": [
+		"Afinia"
+	],
+	"filament_long_retractions_when_cut": [
+		"1"
+	],
+	"filament_retraction_distances_when_cut": [
+		"18"
+	],
+	"nozzle_temperature": [
+		"190"
+	],
+	"nozzle_temperature_initial_layer": [
+		"190"
+	],
+	"compatible_printers": [
+		"Afinia H400 Pro 0.4 nozzle",
+		"Afinia H400 Pro 0.6 nozzle"
+	]
+}
--- a/resources/profiles/Anker/process/0.20mm
+++ b/resources/profiles/Anker/process/0.20mm
@@ -1,6 +1,7 @@
 {
 	"type": "process",
 	"name": "0.20mm Optimal 0.6 nozzle @Anker",
+	"renamed_from": "0.20mm Optimal 0.6 nozzle @Anker.json",
 	"inherits": "fdm_process_anker_common_0_6",
 	"from": "system",
 	"setting_id": "re5qmcOFJ1OJP3Ip",
--- a/resources/profiles/BBL/filament/Bambu
+++ b/resources/profiles/BBL/filament/Bambu
@@ -1,6 +1,7 @@
 {
 	"type": "filament",
 	"name": "Bambu PLA Tough @BBL X1C",
+	"renamed_from": "Bambu PLA Impact @BBL X1C",
 	"inherits": "Bambu PLA Tough @base",
 	"from": "system",
 	"setting_id": "GFSA09_02",
--- a/resources/profiles/BBL/filament/Polymaker/Panchroma
+++ b/resources/profiles/BBL/filament/Polymaker/Panchroma
@@ -1,6 +1,7 @@
 {
 	"type": "filament",
 	"name": "Panchroma PLA Satin @BBL A1",
+	"renamed_from": "Panchroma PLA Stain @BBL A1",
 	"inherits": "Panchroma PLA Satin @base",
 	"from": "system",
 	"setting_id": "GFSPM005_00",
--- a/resources/profiles/BBL/filament/Polymaker/Panchroma
+++ b/resources/profiles/BBL/filament/Polymaker/Panchroma
@@ -1,6 +1,7 @@
 {
 	"type": "filament",
 	"name": "Panchroma PLA Satin @BBL A1M",
+	"renamed_from": "Panchroma PLA Stain @BBL A1M",
 	"inherits": "Panchroma PLA Satin @base",
 	"from": "system",
 	"setting_id": "GFSPM005_02",
--- a/resources/profiles/BBL/filament/Polymaker/Panchroma
+++ b/resources/profiles/BBL/filament/Polymaker/Panchroma
@@ -1,6 +1,7 @@
 {
 	"type": "filament",
 	"name": "Panchroma PLA Satin @BBL P1P",
+	"renamed_from": "Panchroma PLA Stain @BBL P1P",
 	"inherits": "Panchroma PLA Satin @base",
 	"from": "system",
 	"setting_id": "GFSPM005_04",
--- a/resources/profiles/BBL/filament/Polymaker/Panchroma
+++ b/resources/profiles/BBL/filament/Polymaker/Panchroma
@@ -1,6 +1,7 @@
 {
 	"type": "filament",
 	"name": "Panchroma PLA Satin @BBL X1",
+	"renamed_from": "Panchroma PLA Stain @BBL X1",
 	"inherits": "Panchroma PLA Satin @base",
 	"from": "system",
 	"setting_id": "GFSPM005_06",
--- a/resources/profiles/BBL/process/0.20mm
+++ b/resources/profiles/BBL/process/0.20mm
@@ -1,6 +1,7 @@
 {
 	"type": "process",
 	"name": "0.20mm Standard @BBL X1C",
+	"renamed_from": "0.20mm Bambu Support W @BBL X1C",
 	"inherits": "fdm_process_single_0.20",
 	"from": "system",
 	"setting_id": "GP004",
--- a/resources/profiles/Blocks.json
+++ b/resources/profiles/Blocks.json
@@ -1,6 +1,6 @@
 {
 	"name": "Blocks",
-	"version": "02.04.00.02",
+	"version": "02.04.00.01",
 	"force_update": "0",
 	"description": "Blocks configurations",
 	"machine_model_list": [
--- a/resources/profiles/Blocks/filament/Blocks
+++ b/resources/profiles/Blocks/filament/Blocks
@@ -85,8 +85,10 @@
 		"BLOCKS RD50 V2 0.4 nozzle",
 		"BLOCKS RD50 V2 0.6 nozzle",
 		"BLOCKS RD50 V2 0.8 nozzle",
+		"BLOCKS RD50 V2",
 		"BLOCKS RF50 0.4 nozzle",
 		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle"
+		"BLOCKS RF50 0.8 nozzle",
+		"BLOCKS RF50"
 	]
 }
--- a/resources/profiles/Blocks/filament/Blocks
+++ b/resources/profiles/Blocks/filament/Blocks
@@ -85,8 +85,10 @@
 		"BLOCKS RD50 V2 0.4 nozzle",
 		"BLOCKS RD50 V2 0.6 nozzle",
 		"BLOCKS RD50 V2 0.8 nozzle",
+		"BLOCKS RD50 V2",
 		"BLOCKS RF50 0.4 nozzle",
 		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle"
+		"BLOCKS RF50 0.8 nozzle",
+		"BLOCKS RF50"
 	]
 }
--- a/resources/profiles/Blocks/filament/Blocks
+++ b/resources/profiles/Blocks/filament/Blocks
@@ -85,8 +85,10 @@
 		"BLOCKS RD50 V2 0.4 nozzle",
 		"BLOCKS RD50 V2 0.6 nozzle",
 		"BLOCKS RD50 V2 0.8 nozzle",
+		"BLOCKS RD50 V2",
 		"BLOCKS RF50 0.4 nozzle",
 		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle"
+		"BLOCKS RF50 0.8 nozzle",
+		"BLOCKS RF50"
 	]
 }
--- a/resources/profiles/Blocks/filament/Blocks
+++ b/resources/profiles/Blocks/filament/Blocks
@@ -91,8 +91,10 @@
 		"BLOCKS RD50 V2 0.4 nozzle",
 		"BLOCKS RD50 V2 0.6 nozzle",
 		"BLOCKS RD50 V2 0.8 nozzle",
+		"BLOCKS RD50 V2",
 		"BLOCKS RF50 0.4 nozzle",
 		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle"
+		"BLOCKS RF50 0.8 nozzle",
+		"BLOCKS RF50"
 	]
 }
--- a/resources/profiles/Blocks/filament/Blocks
+++ b/resources/profiles/Blocks/filament/Blocks
@@ -16,8 +16,10 @@
 		"BLOCKS RD50 V2 0.4 nozzle",
 		"BLOCKS RD50 V2 0.6 nozzle",
 		"BLOCKS RD50 V2 0.8 nozzle",
+		"BLOCKS RD50 V2",
 		"BLOCKS RF50 0.4 nozzle",
 		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle"
+		"BLOCKS RF50 0.8 nozzle",
+		"BLOCKS RF50"
 	]
 }
--- a/resources/profiles/Blocks/filament/Blocks
+++ b/resources/profiles/Blocks/filament/Blocks
@@ -16,8 +16,10 @@
 		"BLOCKS RD50 V2 0.4 nozzle",
 		"BLOCKS RD50 V2 0.6 nozzle",
 		"BLOCKS RD50 V2 0.8 nozzle",
+		"BLOCKS RD50 V2",
 		"BLOCKS RF50 0.4 nozzle",
 		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle"
+		"BLOCKS RF50 0.8 nozzle",
+		"BLOCKS RF50"
 	]
 }
--- a/resources/profiles/Blocks/filament/Blocks
+++ b/resources/profiles/Blocks/filament/Blocks
@@ -87,11 +87,14 @@
 		"BLOCKS Pro S100 0.8 nozzle",
 		"BLOCKS Pro S100 1.0 nozzle",
 		"BLOCKS Pro S100 1.2 nozzle",
+		"BLOCKS Pro S100",
 		"BLOCKS RD50 V2 0.4 nozzle",
 		"BLOCKS RD50 V2 0.6 nozzle",
 		"BLOCKS RD50 V2 0.8 nozzle",
+		"BLOCKS RD50 V2",
 		"BLOCKS RF50 0.4 nozzle",
 		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle"
+		"BLOCKS RF50 0.8 nozzle",
+		"BLOCKS RF50"
 	]
 }
--- a/resources/profiles/Blocks/filament/Blocks
+++ b/resources/profiles/Blocks/filament/Blocks
@@ -22,8 +22,10 @@
 		"BLOCKS RD50 V2 0.4 nozzle",
 		"BLOCKS RD50 V2 0.6 nozzle",
 		"BLOCKS RD50 V2 0.8 nozzle",
+		"BLOCKS RD50 V2",
 		"BLOCKS RF50 0.4 nozzle",
 		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle"
+		"BLOCKS RF50 0.8 nozzle",
+		"BLOCKS RF50"
 	]
 }
--- a/resources/profiles/Blocks/filament/Blocks
+++ b/resources/profiles/Blocks/filament/Blocks
@@ -45,11 +45,14 @@
 		"BLOCKS Pro S100 0.8 nozzle",
 		"BLOCKS Pro S100 1.0 nozzle",
 		"BLOCKS Pro S100 1.2 nozzle",
+		"BLOCKS Pro S100",
 		"BLOCKS RD50 V2 0.4 nozzle",
 		"BLOCKS RD50 V2 0.6 nozzle",
 		"BLOCKS RD50 V2 0.8 nozzle",
+		"BLOCKS RD50 V2",
 		"BLOCKS RF50 0.4 nozzle",
 		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle"
+		"BLOCKS RF50 0.8 nozzle",
+		"BLOCKS RF50"
 	]
 }
--- a/resources/profiles/Blocks/filament/Blocks
+++ b/resources/profiles/Blocks/filament/Blocks
@@ -16,8 +16,10 @@
 		"BLOCKS RD50 V2 0.4 nozzle",
 		"BLOCKS RD50 V2 0.6 nozzle",
 		"BLOCKS RD50 V2 0.8 nozzle",
+		"BLOCKS RD50 V2",
 		"BLOCKS RF50 0.4 nozzle",
 		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle"
+		"BLOCKS RF50 0.8 nozzle",
+		"BLOCKS RF50"
 	]
 }
--- a/resources/profiles/Blocks/filament/Blocks
+++ b/resources/profiles/Blocks/filament/Blocks
@@ -60,11 +60,14 @@
 		"BLOCKS Pro S100 0.8 nozzle",
 		"BLOCKS Pro S100 1.0 nozzle",
 		"BLOCKS Pro S100 1.2 nozzle",
+		"BLOCKS Pro S100",
 		"BLOCKS RD50 V2 0.4 nozzle",
 		"BLOCKS RD50 V2 0.6 nozzle",
 		"BLOCKS RD50 V2 0.8 nozzle",
+		"BLOCKS RD50 V2",
 		"BLOCKS RF50 0.4 nozzle",
 		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle"
+		"BLOCKS RF50 0.8 nozzle",
+		"BLOCKS RF50"
 	]
 }
--- a/resources/profiles/Blocks/process/0.12mm
+++ b/resources/profiles/Blocks/process/0.12mm
@@ -10,6 +10,7 @@
 	"top_shell_layers": "6",
 	"top_solid_infill_flow_ratio": "0.96",
 	"compatible_printers": [
+		"BLOCKS RD50 V2",
 		"BLOCKS RD50 V2 0.4 nozzle"
 	]
 }
--- a/resources/profiles/Blocks/process/0.12mm
+++ b/resources/profiles/Blocks/process/0.12mm
@@ -10,6 +10,7 @@
 	"bottom_shell_layers": "6",
 	"top_shell_layers": "6",
 	"compatible_printers": [
+		"BLOCKS RF50",
 		"BLOCKS RF50 0.4 nozzle"
 	],
 	"sparse_infill_speed": "300",
--- a/resources/profiles/Blocks/process/0.16mm
+++ b/resources/profiles/Blocks/process/0.16mm
@@ -10,6 +10,7 @@
 	"top_shell_layers": "5",
 	"top_solid_infill_flow_ratio": "0.96",
 	"compatible_printers": [
+		"BLOCKS RD50 V2",
 		"BLOCKS RD50 V2 0.4 nozzle"
 	]
 }
--- a/resources/profiles/Blocks/process/0.16mm
+++ b/resources/profiles/Blocks/process/0.16mm
@@ -10,6 +10,7 @@
 	"bottom_shell_layers": "5",
 	"top_shell_layers": "5",
 	"compatible_printers": [
+		"BLOCKS RF50",
 		"BLOCKS RF50 0.4 nozzle"
 	],
 	"sparse_infill_speed": "300",
--- a/resources/profiles/Blocks/process/0.20mm
+++ b/resources/profiles/Blocks/process/0.20mm
@@ -10,6 +10,7 @@
 	"top_shell_layers": "4",
 	"top_solid_infill_flow_ratio": "0.96",
 	"compatible_printers": [
+		"BLOCKS RD50 V2",
 		"BLOCKS RD50 V2 0.6 nozzle"
 	]
 }
--- a/resources/profiles/Blocks/process/0.20mm
+++ b/resources/profiles/Blocks/process/0.20mm
@@ -10,6 +10,7 @@
 	"bottom_shell_layers": "4",
 	"top_shell_layers": "4",
 	"compatible_printers": [
+		"BLOCKS RF50",
 		"BLOCKS RF50 0.6 nozzle"
 	],
 	"sparse_infill_speed": "300",
--- a/resources/profiles/Blocks/process/0.20mm
+++ b/resources/profiles/Blocks/process/0.20mm
@@ -9,6 +9,7 @@
 	"bottom_shell_layers": "4",
 	"top_shell_layers": "5",
 	"compatible_printers": [
+		"BLOCKS Pro S100",
 		"BLOCKS Pro S100 0.4 nozzle"
 	]
 }
--- a/resources/profiles/Blocks/process/0.20mm
+++ b/resources/profiles/Blocks/process/0.20mm
@@ -10,6 +10,7 @@
 	"top_shell_layers": "5",
 	"top_solid_infill_flow_ratio": "0.96",
 	"compatible_printers": [
+		"BLOCKS RD50 V2",
 		"BLOCKS RD50 V2 0.4 nozzle"
 	]
 }
--- a/resources/profiles/Blocks/process/0.20mm
+++ b/resources/profiles/Blocks/process/0.20mm
@@ -14,6 +14,7 @@
 	"bottom_shell_layers": "4",
 	"top_shell_layers": "5",
 	"compatible_printers": [
+		"BLOCKS RF50",
 		"BLOCKS RF50 0.4 nozzle"
 	],
 	"sparse_infill_speed": "300",
--- a/resources/profiles/Blocks/process/0.24mm
+++ b/resources/profiles/Blocks/process/0.24mm
@@ -9,6 +9,7 @@
 	"bottom_shell_layers": "4",
 	"top_shell_layers": "5",
 	"compatible_printers": [
+		"BLOCKS Pro S100",
 		"BLOCKS Pro S100 0.4 nozzle"
 	]
 }
--- a/resources/profiles/Blocks/process/0.24mm
+++ b/resources/profiles/Blocks/process/0.24mm
@@ -10,6 +10,7 @@
 	"top_shell_layers": "5",
 	"top_solid_infill_flow_ratio": "0.96",
 	"compatible_printers": [
+		"BLOCKS RD50 V2",
 		"BLOCKS RD50 V2 0.4 nozzle"
 	]
 }
--- a/resources/profiles/Blocks/process/0.24mm
+++ b/resources/profiles/Blocks/process/0.24mm
@@ -10,6 +10,7 @@
 	"bottom_shell_layers": "4",
 	"top_shell_layers": "5",
 	"compatible_printers": [
+		"BLOCKS RF50",
 		"BLOCKS RF50 0.4 nozzle"
 	],
 	"sparse_infill_speed": "300",
--- a/resources/profiles/Blocks/process/0.26mm
+++ b/resources/profiles/Blocks/process/0.26mm
@@ -10,6 +10,7 @@
 	"top_shell_layers": "4",
 	"top_solid_infill_flow_ratio": "0.96",
 	"compatible_printers": [
+		"BLOCKS RD50 V2",
 		"BLOCKS RD50 V2 0.6 nozzle"
 	]
 }
--- a/resources/profiles/Blocks/process/0.26mm
+++ b/resources/profiles/Blocks/process/0.26mm
@@ -10,6 +10,7 @@
 	"bottom_shell_layers": "4",
 	"top_shell_layers": "4",
 	"compatible_printers": [
+		"BLOCKS RF50",
 		"BLOCKS RF50 0.6 nozzle"
 	],
 	"sparse_infill_speed": "300",
--- a/resources/profiles/Blocks/process/0.28mm
+++ b/resources/profiles/Blocks/process/0.28mm
@@ -10,6 +10,7 @@
 	"top_shell_layers": "4",
 	"top_solid_infill_flow_ratio": "0.96",
 	"compatible_printers": [
+		"BLOCKS RD50 V2",
 		"BLOCKS RD50 V2 0.4 nozzle"
 	]
 }
--- a/resources/profiles/Blocks/process/0.28mm
+++ b/resources/profiles/Blocks/process/0.28mm
@@ -10,6 +10,7 @@
 	"bottom_shell_layers": "4",
 	"top_shell_layers": "4",
 	"compatible_printers": [
+		"BLOCKS RF50",
 		"BLOCKS RF50 0.4 nozzle"
 	],
 	"sparse_infill_speed": "300",
--- a/resources/profiles/Blocks/process/0.30mm
+++ b/resources/profiles/Blocks/process/0.30mm
@@ -9,6 +9,7 @@
 	"top_shell_layers": "4",
 	"layer_height": "0.30",
 	"compatible_printers": [
+		"BLOCKS Pro S100",
 		"BLOCKS Pro S100 0.4 nozzle"
 	]
 }
--- a/resources/profiles/Blocks/process/0.30mm
+++ b/resources/profiles/Blocks/process/0.30mm
@@ -9,6 +9,7 @@
 	"top_shell_layers": "3",
 	"layer_height": "0.3",
 	"compatible_printers": [
+		"BLOCKS Pro S100",
 		"BLOCKS Pro S100 0.8 nozzle"
 	]
 }
--- a/resources/profiles/Blocks/process/0.30mm
+++ b/resources/profiles/Blocks/process/0.30mm
@@ -10,6 +10,7 @@
 	"top_shell_layers": "4",
 	"top_solid_infill_flow_ratio": "0.96",
 	"compatible_printers": [
+		"BLOCKS RD50 V2",
 		"BLOCKS RD50 V2 0.8 nozzle"
 	]
 }
--- a/resources/profiles/Blocks/process/0.30mm
+++ b/resources/profiles/Blocks/process/0.30mm
@@ -10,6 +10,7 @@
 	"bottom_shell_layers": "4",
 	"top_shell_layers": "4",
 	"compatible_printers": [
+		"BLOCKS RF50",
 		"BLOCKS RF50 0.8 nozzle"
 	],
 	"sparse_infill_speed": "300",
--- a/resources/profiles/Blocks/process/0.30mm
+++ b/resources/profiles/Blocks/process/0.30mm
@@ -9,6 +9,7 @@
 	"top_shell_layers": "4",
 	"layer_height": "0.30",
 	"compatible_printers": [
+		"BLOCKS Pro S100",
 		"BLOCKS Pro S100 1.0 nozzle"
 	]
 }
--- a/resources/profiles/Blocks/process/0.30mm
+++ b/resources/profiles/Blocks/process/0.30mm
@@ -9,6 +9,7 @@
 	"top_shell_layers": "3",
 	"layer_height": "0.30",
 	"compatible_printers": [
+		"BLOCKS Pro S100",
 		"BLOCKS Pro S100 0.6 nozzle"
 	]
 }
--- a/resources/profiles/Blocks/process/0.32mm
+++ b/resources/profiles/Blocks/process/0.32mm
@@ -10,6 +10,7 @@
 	"top_shell_layers": "4",
 	"top_solid_infill_flow_ratio": "0.96",
 	"compatible_printers": [
+		"BLOCKS RD50 V2",
 		"BLOCKS RD50 V2 0.6 nozzle"
 	]
 }
--- a/resources/profiles/Blocks/process/0.32mm
+++ b/resources/profiles/Blocks/process/0.32mm
@@ -10,6 +10,7 @@
 	"bottom_shell_layers": "4",
 	"top_shell_layers": "4",
 	"compatible_printers": [
+		"BLOCKS RF50",
 		"BLOCKS RF50 0.6 nozzle"
 	],
 	"sparse_infill_speed": "300",
--- a/resources/profiles/Blocks/process/0.38mm
+++ b/resources/profiles/Blocks/process/0.38mm
@@ -10,6 +10,7 @@
 	"top_shell_layers": "4",
 	"top_solid_infill_flow_ratio": "0.96",
 	"compatible_printers": [
+		"BLOCKS RD50 V2",
 		"BLOCKS RD50 V2 0.6 nozzle"
 	]
 }
--- a/resources/profiles/Blocks/process/0.38mm
+++ b/resources/profiles/Blocks/process/0.38mm
@@ -10,6 +10,7 @@
 	"bottom_shell_layers": "3",
 	"top_shell_layers": "4",
 	"compatible_printers": [
+		"BLOCKS RF50",
 		"BLOCKS RF50 0.6 nozzle"
 	],
 	"sparse_infill_speed": "300",
--- a/resources/profiles/Blocks/process/0.38mm
+++ b/resources/profiles/Blocks/process/0.38mm
@@ -10,6 +10,7 @@
 	"top_shell_layers": "4",
 	"top_solid_infill_flow_ratio": "0.96",
 	"compatible_printers": [
+		"BLOCKS RD50 V2",
 		"BLOCKS RD50 V2 0.8 nozzle"
 	]
 }
--- a/resources/profiles/Blocks/process/0.38mm
+++ b/resources/profiles/Blocks/process/0.38mm
@@ -10,6 +10,7 @@
 	"bottom_shell_layers": "4",
 	"top_shell_layers": "4",
 	"compatible_printers": [
+		"BLOCKS RF50",
 		"BLOCKS RF50 0.8 nozzle"
 	],
 	"sparse_infill_speed": "300",
--- a/resources/profiles/Blocks/process/0.40mm
+++ b/resources/profiles/Blocks/process/0.40mm
@@ -9,6 +9,7 @@
 	"top_shell_layers": "2",
 	"layer_height": "0.40",
 	"compatible_printers": [
+		"BLOCKS Pro S100",
 		"BLOCKS Pro S100 0.6 nozzle"
 	]
 }
--- a/resources/profiles/Blocks/process/0.40mm
+++ b/resources/profiles/Blocks/process/0.40mm
@@ -9,6 +9,7 @@
 	"top_shell_layers": "4",
 	"layer_height": "0.40",
 	"compatible_printers": [
+		"BLOCKS Pro S100",
 		"BLOCKS Pro S100 0.8 nozzle"
 	]
 }
--- a/resources/profiles/Blocks/process/0.46mm
+++ b/resources/profiles/Blocks/process/0.46mm
@@ -10,6 +10,7 @@
 	"top_shell_layers": "4",
 	"top_solid_infill_flow_ratio": "0.96",
 	"compatible_printers": [
+		"BLOCKS RD50 V2",
 		"BLOCKS RD50 V2 0.8 nozzle"
 	]
 }
--- a/resources/profiles/Blocks/process/0.46mm
+++ b/resources/profiles/Blocks/process/0.46mm
@@ -10,6 +10,7 @@
 	"bottom_shell_layers": "3",
 	"top_shell_layers": "4",
 	"compatible_printers": [
+		"BLOCKS RF50",
 		"BLOCKS RF50 0.8 nozzle"
 	],
 	"sparse_infill_speed": "300",
--- a/resources/profiles/Blocks/process/0.50mm
+++ b/resources/profiles/Blocks/process/0.50mm
@@ -9,6 +9,7 @@
 	"top_shell_layers": "4",
 	"layer_height": "0.50",
 	"compatible_printers": [
+		"BLOCKS Pro S100",
 		"BLOCKS Pro S100 0.8 nozzle"
 	]
 }
--- a/resources/profiles/Blocks/process/0.50mm
+++ b/resources/profiles/Blocks/process/0.50mm
@@ -9,6 +9,7 @@
 	"top_shell_layers": "3",
 	"layer_height": "0.50",
 	"compatible_printers": [
+		"BLOCKS Pro S100",
 		"BLOCKS Pro S100 1.2 nozzle"
 	]
 }
--- a/resources/profiles/Blocks/process/0.50mm
+++ b/resources/profiles/Blocks/process/0.50mm
@@ -9,6 +9,7 @@
 	"top_shell_layers": "3",
 	"layer_height": "0.50",
 	"compatible_printers": [
+		"BLOCKS Pro S100",
 		"BLOCKS Pro S100 1.0 nozzle"
 	]
 }
--- a/resources/profiles/Blocks/process/0.54mm
+++ b/resources/profiles/Blocks/process/0.54mm
@@ -10,6 +10,7 @@
 	"top_shell_layers": "4",
 	"top_solid_infill_flow_ratio": "0.96",
 	"compatible_printers": [
+		"BLOCKS RD50 V2",
 		"BLOCKS RD50 V2 0.8 nozzle"
 	]
 }
--- a/resources/profiles/Blocks/process/0.54mm
+++ b/resources/profiles/Blocks/process/0.54mm
@@ -10,6 +10,7 @@
 	"bottom_shell_layers": "3",
 	"top_shell_layers": "4",
 	"compatible_printers": [
+		"BLOCKS RF50",
 		"BLOCKS RF50 0.8 nozzle"
 	],
 	"sparse_infill_speed": "300",
--- a/resources/profiles/Blocks/process/0.60mm
+++ b/resources/profiles/Blocks/process/0.60mm
@@ -9,6 +9,7 @@
 	"top_shell_layers": "3",
 	"layer_height": "0.60",
 	"compatible_printers": [
+		"BLOCKS Pro S100",
 		"BLOCKS Pro S100 1.0 nozzle"
 	]
 }
--- a/resources/profiles/Blocks/process/0.60mm
+++ b/resources/profiles/Blocks/process/0.60mm
@@ -9,6 +9,7 @@
 	"top_shell_layers": "3",
 	"layer_height": "0.60",
 	"compatible_printers": [
+		"BLOCKS Pro S100",
 		"BLOCKS Pro S100 1.2 nozzle"
 	]
 }
--- a/resources/profiles/Blocks/process/0.70mm
+++ b/resources/profiles/Blocks/process/0.70mm
@@ -9,6 +9,7 @@
 	"top_shell_layers": "3",
 	"layer_height": "0.70",
 	"compatible_printers": [
+		"BLOCKS Pro S100",
 		"BLOCKS Pro S100 1.2 nozzle"
 	]
 }
--- a/resources/profiles/Blocks/process/0.70mm
+++ b/resources/profiles/Blocks/process/0.70mm
@@ -9,6 +9,7 @@
 	"top_shell_layers": "3",
 	"layer_height": "0.70",
 	"compatible_printers": [
+		"BLOCKS Pro S100",
 		"BLOCKS Pro S100 1.0 nozzle"
 	]
 }
--- a/resources/profiles/Blocks/process/0.80mm
+++ b/resources/profiles/Blocks/process/0.80mm
@@ -9,6 +9,7 @@
 	"top_shell_layers": "2",
 	"layer_height": "0.80",
 	"compatible_printers": [
+		"BLOCKS Pro S100",
 		"BLOCKS Pro S100 1.2 nozzle"
 	]
 }
--- a/resources/profiles/Blocks/process/fdm_process_common
+++ b/resources/profiles/Blocks/process/fdm_process_common
@@ -9,8 +9,11 @@
 	"bridge_flow": "0.95",
 	"brim_width": "5",
 	"compatible_printers": [
+		"BLOCKS Pro S100",
 		"BLOCKS Pro S100 0.6 nozzle",
+		"BLOCKS RD50 V2",
 		"BLOCKS RD50 V2 0.6 nozzle",
+		"BLOCKS RF50",
 		"BLOCKS RF50 0.6 nozzle"
 	],
 	"print_sequence": "by layer",
--- a/resources/profiles/Blocks/process/fdm_process_common
+++ b/resources/profiles/Blocks/process/fdm_process_common
@@ -5,8 +5,11 @@
 	"from": "system",
 	"instantiation": "false",
 	"compatible_printers": [
+		"BLOCKS Pro S100",
 		"BLOCKS Pro S100 0.8 nozzle",
+		"BLOCKS RD50 V2",
 		"BLOCKS RD50 V2 0.8 nozzle",
+		"BLOCKS RF50",
 		"BLOCKS RF50 0.8 nozzle"
 	],
 	"sparse_infill_line_width": "0.82",
--- a/resources/profiles/Chuanying.json
+++ b/resources/profiles/Chuanying.json
@@ -1,7 +1,7 @@
 {
 	"name": "Chuanying",
 	"url": "",
-	"version": "02.04.00.02",
+	"version": "02.04.00.01",
 	"force_update": "0",
 	"description": "Chuanying configurations",
 	"machine_model_list": [
--- a/resources/profiles/Chuanying/filament/Chuanying
+++ b/resources/profiles/Chuanying/filament/Chuanying
@@ -19,7 +19,13 @@
 	"compatible_printers": [
 		"Chuanying X1 0.4 Nozzle",
 		"Chuanying X1 0.6 Nozzle",
-		"Chuanying X1 0.8 Nozzle"
+		"Chuanying X1 0.8 Nozzle",
+		"Chuanying Adventurer 5M 0.4 Nozzle",
+		"Chuanying Adventurer 5M 0.6 Nozzle",
+		"Chuanying Adventurer 5M 0.8 Nozzle",
+		"Chuanying Adventurer 5M Pro 0.4 Nozzle",
+		"Chuanying Adventurer 5M Pro 0.6 Nozzle",
+		"Chuanying Adventurer 5M Pro 0.8 Nozzle"
 	],
 	"compatible_printers_condition": "",
 	"compatible_prints": [],
--- a/resources/profiles/Comgrow.json
+++ b/resources/profiles/Comgrow.json
@@ -1,6 +1,6 @@
 {
 	"name": "Comgrow",
-	"version": "02.04.00.03",
+	"version": "02.04.00.02",
 	"force_update": "0",
 	"description": "Comgrow configurations",
 	"machine_model_list": [
@@ -50,6 +50,10 @@
 			"name": "0.20mm Standard @Comgrow T500 0.6",
 			"sub_path": "process/0.20mm Standard @Comgrow T500 0.6.json"
 		},
+		{
+			"name": "0.20mm Standard @Comgrow T500 1.0",
+			"sub_path": "process/0.20mm Standard @Comgrow T500 1.0.json"
+		},
 		{
 			"name": "0.24mm Draft @Comgrow T500 0.4",
 			"sub_path": "process/0.24mm Draft @Comgrow T500 0.4.json"
--- a/resources/profiles/Comgrow/process/0.20mm
+++ b/resources/profiles/Comgrow/process/0.20mm
@@ -0,0 +1,103 @@
+{
+	"type": "process",
+	"name": "0.20mm Standard @Comgrow T500 1.0",
+	"inherits": "fdm_process_comgrow_common",
+	"from": "system",
+	"setting_id": "2lOjEPJ5JELGadG3",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.24",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "2",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "0.85",
+	"bridge_speed": "25",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "1.0",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "1.0",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_line_width": "1.0",
+	"initial_layer_print_height": "0.28",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "1.0",
+	"infill_wall_overlap": "23%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.25",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "1.0",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "3",
+	"skirt_height": "2",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "1.0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "60",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "1.0",
+	"top_shell_layers": "2",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "25",
+	"initial_layer_infill_speed": "80",
+	"outer_wall_speed": "50",
+	"inner_wall_speed": "60",
+	"internal_solid_infill_speed": "60",
+	"top_surface_speed": "40",
+	"gap_infill_speed": "60",
+	"sparse_infill_speed": "50",
+	"travel_speed": "80",
+	"enable_prime_tower": "1",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"seam_gap": "5%",
+	"compatible_printers": [
+		"Comgrow T500 1.0 nozzle"
+	]
+}
--- a/resources/profiles/Creality.json
+++ b/resources/profiles/Creality.json
@@ -1,6 +1,6 @@
 {
 	"name": "Creality",
-	"version": "02.03.02.75",
+	"version": "02.03.02.74",
 	"force_update": "0",
 	"description": "Creality configurations",
 	"machine_model_list": [
@@ -4034,14 +4034,6 @@
 			"name": "Creality Ender-5 Max 0.4 nozzle",
 			"sub_path": "machine/Creality Ender-5 Max 0.4 nozzle.json"
 		},
-		{
-			"name": "Creality Ender-5 Max 0.6 nozzle",
-			"sub_path": "machine/Creality Ender-5 Max 0.6 nozzle.json"
-		},
-		{
-			"name": "Creality Ender-5 Max 0.8 nozzle",
-			"sub_path": "machine/Creality Ender-5 Max 0.8 nozzle.json"
-		},
 		{
 			"name": "Creality Ender-5 Plus 0.4 nozzle",
 			"sub_path": "machine/Creality Ender-5 Plus 0.4 nozzle.json"
--- a/resources/profiles/Creality/filament/CR-PETG
+++ b/resources/profiles/Creality/filament/CR-PETG
@@ -153,7 +153,6 @@
    "material_flow_dependent_temperature": "0",
    "material_flow_temp_graph": "[[3.0,220],[5.0,240],[10.0,250]]",
    "pressure_advance": "0.05",
-    "filament_id": "06101",
    "support_material_interface_fan_speed": "-1",
    "compatible_printers": [
        "Creality Ender-5 Max 0.4 nozzle",
--- a/resources/profiles/Creality/process/0.12mm
+++ b/resources/profiles/Creality/process/0.12mm
@@ -113,6 +113,6 @@
 	"initial_layer_jerk": "7",
 	"travel_jerk": "7",
 	"compatible_printers": [
-		"Creality CR-10 SE 0.2 nozzle"
+		"Creality CR-10SE 0.2 nozzle"
 	]
 }
--- a/resources/profiles/Creality/process/0.12mm
+++ b/resources/profiles/Creality/process/0.12mm
@@ -1,6 +1,7 @@
 {
 	"type": "process",
 	"name": "0.12mm Fine @Creality Ender3V3SE 0.4",
+	"renamed_from": "0.12mm Fine @Creality Ender3V3SE",
 	"inherits": "fdm_process_creality_common",
 	"from": "system",
 	"setting_id": "W68mSPdmat2rCXuD",
--- a/resources/profiles/Creality/process/0.16mm
+++ b/resources/profiles/Creality/process/0.16mm
@@ -1,6 +1,7 @@
 {
 	"type": "process",
 	"name": "0.16mm Optimal @Creality Ender3V3SE 0.4",
+	"renamed_from": "0.16mm Optimal @Creality Ender3V3SE",
 	"inherits": "fdm_process_creality_common",
 	"from": "system",
 	"setting_id": "jvnrh3jh6Btbs1Ja",
--- a/resources/profiles/Creality/process/0.20mm
+++ b/resources/profiles/Creality/process/0.20mm
@@ -1,6 +1,7 @@
 {
 	"type": "process",
 	"name": "0.20mm Standard @Creality Ender3V3SE 0.4",
+	"renamed_from": "0.20mm Standard @Creality Ender3V3SE",
 	"inherits": "fdm_process_creality_common",
 	"from": "system",
 	"setting_id": "YLkw9eyyK7cm97ek",
--- a/resources/profiles/Creality/process/0.20mm
+++ b/resources/profiles/Creality/process/0.20mm
@@ -1,6 +1,7 @@
 {
 	"type": "process",
 	"name": "0.20mm Standard @Creality K1 SE",
+	"renamed_from": "0.20mm Fast @Creality K1 SE 0.4",
 	"inherits": "fdm_process_creality_common",
 	"from": "system",
 	"setting_id": "eR9pRC1qPENNx8U9",
@@ -264,4 +265,4 @@
 	"wipe_tower_extra_spacing": "100%",
 	"wipe_tower_rotation_angle": "0",
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70"
-}
+}
--- a/resources/profiles/Creality/process/0.24mm
+++ b/resources/profiles/Creality/process/0.24mm
@@ -1,6 +1,7 @@
 {
 	"type": "process",
 	"name": "0.24mm Draft @Creality Ender3V3SE 0.4",
+	"renamed_from": "0.24mm Draft @Creality Ender3V3SE",
 	"inherits": "fdm_process_creality_common",
 	"from": "system",
 	"setting_id": "Hg10EUNCLMEYYBN1",
--- a/resources/profiles/Creality/process/0.48mm
+++ b/resources/profiles/Creality/process/0.48mm
@@ -1,6 +1,7 @@
 {
 	"type": "process",
 	"name": "0.48mm Draft @Creality K1C",
+	"renamed_from": "0.48mm Draft @Creality K1C (0.8 nozzle)",
 	"inherits": "fdm_process_common_klipper",
 	"from": "system",
 	"setting_id": "qaiff3f8gSQ1GVj1",
--- a/resources/profiles/Elegoo/filament/Generic/Generic
+++ b/resources/profiles/Elegoo/filament/Generic/Generic
@@ -2,6 +2,7 @@
 	"type": "filament",
 	"setting_id": "pKzSR8XeyyUDbrNW",
 	"name": "Generic PETG PRO @Elegoo",
+	"renamed_from": "Elegoo Generic PETG PRO",
 	"from": "system",
 	"instantiation": "true",
 	"inherits": "Generic PETG @base",
--- a/resources/profiles/Ginger
+++ b/resources/profiles/Ginger
@@ -1,6 +1,7 @@
 {
 	"type": "filament",
 	"name": "Ginger Generic PETG",
+	"renamed_from": "Ginger Generic rPETG",
 	"inherits": "fdm_filament_common",
 	"from": "system",
 	"setting_id": "ue95N2e65rdp5K6c",
--- a/resources/profiles/Ginger
+++ b/resources/profiles/Ginger
@@ -1,6 +1,7 @@
 {
 	"type": "filament",
 	"name": "Ginger Generic PLA",
+	"renamed_from": "Ginger Generic rPLA",
 	"inherits": "fdm_filament_common",
 	"from": "system",
 	"setting_id": "Z1scjKDBFoDaTa2C",
--- a/resources/profiles/MagicMaker.json
+++ b/resources/profiles/MagicMaker.json
@@ -1,6 +1,6 @@
 {
 	"name": "MagicMaker",
-	"version": "02.04.00.02",
+	"version": "02.04.00.01",
 	"force_update": "0",
 	"description": "MagicMaker configurations",
 	"machine_model_list": [
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
ExPikaPaka	3ec4ec0620	Preserve disabled filament overrides (nil) through cloud sync	2026-07-03 08:46:52 +02:00
raistlin7447	adc8763099	fix: crash in Measure tool when a plain edge is the first selection (#14538 ) * fix: crash in Measure tool when a plain edge is the first selection The SPHERE_2 gripper raycaster called get_feature_offset() on .first.feature instead of .second.feature (copy-pasted from the SPHERE_1 block). Plain planar-border edges store no extra point, so the Edge branch dereferenced an empty optional behind a release-stripped assert, aborting on Flatpak and undefined behavior elsewhere. Point the SPHERE_2 raycaster at .second.feature and fall the Edge branch back to the edge midpoint. Fixes #14018	2026-07-03 11:29:28 +08:00
raistlin7447	036bd7bcec	feat: add {first_object_name} filename placeholder (#14497 ) {input_filename_base} is meant to be the saved project's file name. Before #13753 a bug made it fall back to the first object's name when a project was saved; #13753 fixed it to use the project name. Some users relied on the old behavior to get the part name into their output file name and had no placeholder to recover it ({model_name} is the 3mf designer metadata, blank for plain STL imports). Add {first_object_name} as a dedicated placeholder for the first printable object on the current plate, populated in update_object_placeholders() independently of {input_filename_base}. Closes #14493	2026-07-03 00:14:32 +08:00
raistlin7447	d24e7f75ef	fix: crash when rotating the prime tower (#14499 ) Selecting the prime tower and rotating it (PageUp/PageDown) crashed. Selection::notify_instance_update() indexed m_model->objects with the wipe tower's synthetic id (>= 1000), which is not a ModelObject index, so the lookup returned garbage and dereferencing it segfaulted. do_rotate/do_scale/do_mirror already skip the wipe tower in their own loops but all call this shared helper, so scale and mirror hit the same fault. Selection::drop() had the same latent bug via a direct index. Guard both with the >= 1000 check already used throughout the file. Fixes #14498	2026-07-03 00:08:15 +08:00
sharanchius	0f88b88f3b	Updated and fixed the Lithuanian translation v2.4.1 (#14532 ) Atnaujintas lietuvių kalbos vertimas v2.4.1	2026-07-02 23:51:55 +08:00
Noisyfox	464a81d585	Support accessing coFloatsOrPercents values in gcode template (#14526 ) * Support accessing `coFloatsOrPercents` values in gcode template (OrcaSlicer/OrcaSlicer#14522) * Vector option values are separated by comma * Fix wrong cast used for checking nullability	2026-07-02 23:51:20 +08:00
dependabot[bot]	4c58d0adf8	Bump actions/checkout from 6 to 7 (#14517 ) Bumps [actions/checkout](https://github.com/actions/checkout) from 6 to 7. - [Release notes](https://github.com/actions/checkout/releases) - [Changelog](https://github.com/actions/checkout/blob/main/CHANGELOG.md) - [Commits](https://github.com/actions/checkout/compare/v6...v7) --- updated-dependencies: - dependency-name: actions/checkout dependency-version: '7' dependency-type: direct:production update-type: version-update:semver-major ... Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> Co-authored-by: SoftFever <softfeverever@gmail.com>	2026-07-02 23:50:31 +08:00
dependabot[bot]	ce6c2ec7ce	Bump actions/cache from 5 to 6 (#14516 ) Bumps [actions/cache](https://github.com/actions/cache) from 5 to 6. - [Release notes](https://github.com/actions/cache/releases) - [Changelog](https://github.com/actions/cache/blob/main/RELEASES.md) - [Commits](https://github.com/actions/cache/compare/v5...v6) --- updated-dependencies: - dependency-name: actions/cache dependency-version: '6' dependency-type: direct:production update-type: version-update:semver-major ... Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	2026-07-02 23:50:06 +08:00
Gabriel Monteiro	dbe99d0d6f	feat(log): enable console logging in RelWithDebInfo builds (#14439 ) * feat(log): enable console logging in RelWithDebInfo builds * perf(log): make console logging async to avoid blocking startup * fix(log): gate console sink to RelWithDebInfo builds --------- Co-authored-by: Gabriel <bielpaess912@gmail.com>	2026-07-02 21:49:51 +08:00
ExPikaPaka	5bccc25705	Fix "plug-in file may be in use" install failure when migrating from older versions (#14373 ) (#14528 ) Fix network plug-in install failing when the plug-in DLL is in use (#14373) Switching or reinstalling the Bambu network plug-in from a running OrcaSlicer failed with "The plug-in file may be in use". install_plugin() deleted each existing file before extracting the new one, and on Windows a currently-loaded DLL (BambuSource.dll, or the legacy networking library) cannot be removed or overwritten in place, so the whole install aborted. Rename an in-use file aside to "<name>.old" before writing the new one: the running module keeps mapping the renamed file while the new version is extracted, so the install succeeds without having to unload the plug-in first. Stale ".old" files are cleaned up at the start of on_init_network(), before the plug-in is (re)loaded, so they do not accumulate.	2026-07-02 18:58:23 +08:00
SoftFever	a6ccbced03	Feat/update preset validator (#14507 ) # Description This PR expands profile validation so we can catch backward compatibility issues with custom presets generated by older OrcaSlicer releases. It also adds missing `renamed_from` metadata for presets that were renamed or moved, so older user presets can resolve their original parent names against the current system profiles. ## Background Many users have reported missing preset issues after upgrading past 2.4.1. Investigation showed two common causes: - preset lookup and compatibility checks did not always account for `renamed_from` - some renamed base presets were missing the old preset name in their `renamed_from` metadata The existing profile workflow validates the current system profile tree and a single nightly-generated custom preset bundle. That is useful for catching current profile errors, but it does not validate user presets generated by older OrcaSlicer versions against the current system profiles. As a result, older missing-parent compatibility gaps can slip through. ## Changes - Update `check_profiles.yml` to validate historical custom preset fixtures from `OrcaSlicer/OrcaSlicer-profile-validator`. - Download the fixture manifest from the public `fixture-archive` release. - Validate each `orca_custom_presets_<version>.zip` fixture independently against the current PR's `resources/profiles`. - Generate per-version validation logs and upload them as workflow artifacts. - Fail profile validation if any historical fixture version fails. - Add missing `renamed_from` aliases for renamed/moved presets found by the historical fixture validation. ## Profile Compatibility Fixes This PR adds aliases for older parent names including: - `0.20mm Bambu Support W @BBL X1C` -> `0.20mm Standard @BBL X1C` - `Bambu PLA Impact @BBL X1C` -> `Bambu PLA Impact @System` - `Ginger Generic rPLA` -> `Ginger Generic PLA` - `Ginger Generic rPETG` -> `Ginger Generic PETG` - legacy `Panchroma PLA Stain` BBL filament names -> current `Panchroma PLA Satin` names - legacy Elegoo casing/name variants such as `Elegoo RAPID PLA+`, `Elegoo RAPID PETG`, `Elegoo RAPID PETG+`, and `Elegoo PETG Pro @System` ## Validation Flow The custom preset validation step now: 1. Downloads `manifest.json` from the `fixture-archive` release. 2. Iterates over every fixture listed in the manifest. 3. Copies the current branch's `resources/profiles` into a temporary profile tree. 4. Removes any existing `user` directory from that temporary tree. 5. Unzips exactly one historical fixture into the temporary tree. 6. Runs `OrcaSlicer_profile_validator -p <temp profile tree> -l 2`. 7. Writes a version-specific log and a consolidated summary. This keeps validation scoped per fixture version and avoids mixing generated user presets from different OrcaSlicer releases. ## Fixture Source Historical fixtures are stored as public release assets in: `OrcaSlicer/OrcaSlicer-profile-validator`, release tag `fixture-archive` Each release asset is expected to be named like: ```text orca_custom_presets_v2.4.1.zip ``` ## Testing Validated locally with: - current system profile validation - BBL filament subtype validation - historical custom preset fixture validation - extra profile JSON check in a clean profile tree The affected historical fixture set passed after adding the missing `renamed_from` aliases. The release manifest controls which fixture versions are validated. [How to Download Pull Requests Artifacts for Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)	2026-07-02 18:47:49 +08:00
SoftFever	c7b28565ef	don't upload logs	2026-07-02 18:44:45 +08:00
SoftFever	66b3e27af3	fix "Bambu PLA Impact @BBL X1C"	2026-07-02 18:20:56 +08:00
SoftFever	3bc2c51fe9	revert change in resources\profiles\OrcaFilamentLibrary\filament\Bambu\Bambu PLA Impact @System.json	2026-07-02 17:49:48 +08:00
SoftFever	187beb68c3	fix voron	2026-07-02 17:42:47 +08:00
Ian Chua	7d62ded630	fix: add renamed_from for missing names from 1.9.0 -> 2.2.0	2026-07-02 11:25:22 +08:00
Ian Chua	43a83397d4	fix: restore presets that were renamed based on errors logged by workflow	2026-07-01 18:53:36 +08:00
Ian Chua	ced980e6a8	feat: update preset validator to validate against older generated presets	2026-07-01 18:34:07 +08:00