always run check_preset_references

.github/workflows/check_profiles.yml

@@ -41,7 +41,7 @@ jobs:
           curl -L -o OrcaSlicer_profile_validator https://github.com/OrcaSlicer/OrcaSlicer/releases/download/nightly-builds/OrcaSlicer_profile_validator_Linux_Ubuntu2404_nightly
           chmod +x ./OrcaSlicer_profile_validator
 
-      # validate profiles
+      # Validate all system profiles.
       - name: validate system profiles
         id: validate_system
         continue-on-error: true
@@ -57,20 +57,6 @@ jobs:
           set +e
           ./OrcaSlicer_profile_validator -p ${{ github.workspace }}/resources/profiles -l 2 -v BBL -f 2>&1 | tee ${{ runner.temp }}/validate_filament_subtypes.log
           exit ${PIPESTATUS[0]}
-      # Flag inherits/compatible_printers/compatible_prints references that point at a deleted or
-      # renamed preset. Opt-in per vendor for now (via -r); enabled for BBL and Qidi until other
-      # vendors' profiles are cleaned up. Runs before the custom-preset injection below.
-      - name: validate preset references for BBL and Qidi profiles
-        id: validate_preset_references
-        continue-on-error: true
-        run: |
-          set +e
-          rc=0
-          for v in BBL Qidi; do
-            ./OrcaSlicer_profile_validator -p ${{ github.workspace }}/resources/profiles -l 2 -v "$v" -r 2>&1 | tee -a ${{ runner.temp }}/validate_preset_references.log
-            [ ${PIPESTATUS[0]} -ne 0 ] && rc=1
-          done
-          exit $rc
 
       - name: validate custom presets
         id: validate_custom
@@ -90,7 +76,7 @@ jobs:
           echo "${{ github.event.pull_request.number }}" > ${{ runner.temp }}/profile-check-results/pr_number.txt
 
       - name: Prepare comment artifact
-        if: ${{ always() && github.event_name == 'pull_request' && (steps.extra_json_check.outcome == 'failure' || steps.validate_system.outcome == 'failure' || steps.validate_filament_subtypes.outcome == 'failure' || steps.validate_preset_references.outcome == 'failure' || steps.validate_custom.outcome == 'failure') }}
+        if: ${{ always() && github.event_name == 'pull_request' && (steps.extra_json_check.outcome == 'failure' || steps.validate_system.outcome == 'failure' || steps.validate_filament_subtypes.outcome == 'failure' || steps.validate_custom.outcome == 'failure') }}
         run: |
           {
             # Marker matched by check_profiles_comment.yml to delete prior comments.
@@ -125,15 +111,6 @@ jobs:
               echo ""
             fi
 
-            if [ "${{ steps.validate_preset_references.outcome }}" = "failure" ]; then
-              echo "### BBL/Qidi Preset Reference Validation Failed"
-              echo ""
-              echo '```'
-              head -c 30000 ${{ runner.temp }}/validate_preset_references.log || echo "No output captured"
-              echo '```'
-              echo ""
-            fi
-
             if [ "${{ steps.validate_custom.outcome }}" = "failure" ]; then
               echo "### Custom Preset Validation Failed"
               echo ""
@@ -156,7 +133,7 @@ jobs:
           retention-days: 1
 
       - name: Fail if any check failed
-        if: ${{ always() && (steps.extra_json_check.outcome == 'failure' || steps.validate_system.outcome == 'failure' || steps.validate_filament_subtypes.outcome == 'failure' || steps.validate_preset_references.outcome == 'failure' || steps.validate_custom.outcome == 'failure') }}
+        if: ${{ always() && (steps.extra_json_check.outcome == 'failure' || steps.validate_system.outcome == 'failure' || steps.validate_filament_subtypes.outcome == 'failure' || steps.validate_custom.outcome == 'failure') }}
         run: |
           echo "One or more profile checks failed. See above for details."
           exit 1

src/dev-utils/OrcaSlicer_profile_validator.cpp

@@ -96,7 +96,6 @@ int main(int argc, char* argv[])
     ("vendor,v", po::value<std::string>()->default_value(""), "Vendor name. Optional, all profiles present in the folder will be validated if not specified")
     ("generate_presets,g", po::value<bool>()->default_value(false), "Generate user presets for mock test")
     ("check_filament_subtypes,f", po::bool_switch()->default_value(false), "Also flag printers with duplicate (ambiguous) filament subtypes. Off unless this flag is present.")
-    ("check_preset_references,r", po::bool_switch()->default_value(false), "Also flag presets whose inherits/compatible_printers/compatible_prints reference a deleted or renamed preset. Off unless this flag is present.")
     ("log_level,l", po::value<int>()->default_value(2), "Log level. Optional, default is 2 (warning). Higher values produce more detailed logs.");
     // clang-format on
 
@@ -121,7 +120,6 @@ int main(int argc, char* argv[])
     int         log_level            = vm["log_level"].as<int>();
     bool        generate_user_preset = vm["generate_presets"].as<bool>();
     bool        check_filament_subtypes = vm["check_filament_subtypes"].as<bool>();
-    bool        check_preset_references = vm["check_preset_references"].as<bool>();
 
     //  check if path is valid, and return error if not
     if (!fs::exists(path) || !fs::is_directory(path)) {
@@ -168,7 +166,7 @@ int main(int argc, char* argv[])
         return 0;
     }
 
-    if (preset_bundle->has_errors(check_filament_subtypes, check_preset_references)) {
+    if (preset_bundle->has_errors(check_filament_subtypes)) {
         std::cout << "Validation failed" << std::endl;
         return 1;
     }

src/libslic3r/PresetBundle.cpp

@@ -5528,7 +5528,7 @@ void PresetBundle::set_default_suppressed(bool default_suppressed)
     printers.set_default_suppressed(default_suppressed);
 }
 
-bool PresetBundle::has_errors(bool check_duplicate_filament_subtypes, bool check_references) const
+bool PresetBundle::has_errors(bool check_duplicate_filament_subtypes) const
 {
     if (m_errors != 0 || printers.m_errors != 0 || filaments.m_errors != 0 || prints.m_errors != 0)
         return true;
@@ -5551,7 +5551,7 @@ bool PresetBundle::has_errors(bool check_duplicate_filament_subtypes, bool check
     if (check_duplicate_filament_subtypes && this->check_duplicate_filament_subtypes())
         has_errors = true;
 
-    if (check_references && this->check_preset_references())
+    if (this->check_preset_references())
         has_errors = true;
 
     return has_errors;

src/libslic3r/PresetBundle.hpp

@@ -485,9 +485,8 @@ public:
         return      { Preset::TYPE_PRINTER, Preset::TYPE_SLA_PRINT, Preset::TYPE_SLA_MATERIAL };
     }
 
-    // Orca: for validation only. The duplicate filament subtype and preset-reference checks are
-    // opt-in for now (enabled per-vendor by the profile-check CI as vendors are cleaned up).
-    bool has_errors(bool check_duplicate_filament_subtypes = false, bool check_preset_references = false) const;
+    // Orca: for validation only.
+    bool has_errors(bool check_duplicate_filament_subtypes = false) const;
 
     // Orca: for validation only. Flag any system preset whose inherits / compatible_printers /
     // compatible_prints references a deleted (unknown) or renamed (old) preset name.