fix: request permission on main thread

The device drying options hold several values per filament, as many as
the filament preset gives, and a project stores them as the filaments'
values one after another. The CLI filament merge wrote them like an
option with one value per filament, putting each preset's first value at
the filament's own index, so a project with three filaments whose preset
gives "1", "0" was exported with 1;1;1;0;1;0 where the GUI writes
1;0;1;0;1;0.

The merge now leaves these options out of the per-filament pass and
rebuilds them afterwards from every filament's values in slot order.
Without a fixed number of values per filament one slot cannot be
replaced in place, so the stored values are kept when any slot has no
config to rebuild from.

AGENTS.md

@@ -4,15 +4,17 @@ OrcaSlicer — open-source C++17 3D slicer. wxWidgets GUI, CMake build system.
 
 ## Build Commands
 
+Build the Release configuration unless asked otherwise.
+
 ```bash
 # macOS
-cmake --build build/arm64 --config RelWithDebInfo --target all --
+cmake --build build/arm64 --config Release --target all --
 
 # Linux
-cmake --build build --config RelWithDebInfo --target all --
+cmake --build build --config Release --target all --
 
-# Windows (replace %build_type% with Debug/Release/RelWithDebInfo)
-cmake --build . --config %build_type% --target ALL_BUILD -- -m
+# Windows
+cmake --build . --config Release --target ALL_BUILD -- -m
 ```
 
 ## Testing

scripts/disable_validation.entitlements

@@ -4,5 +4,10 @@
 <dict>
     <key>com.apple.security.cs.disable-library-validation</key>
     <true/>
+    <!-- The Bambu network plug-in's code protector rewrites one of its own signed code pages
+         after loading. Under the hardened runtime macOS kills the process when that page is
+         paged back in; this lets it run, as Bambu Studio's signature does. -->
+    <key>com.apple.security.cs.allow-unsigned-executable-memory</key>
+    <true/>
 </dict>
 </plist>

src/OrcaSlicer.cpp

@@ -3618,6 +3618,9 @@ int CLI::run(int argc, char **argv)
                 {
                     if (opt_key == "compatible_prints" || opt_key == "compatible_printers" || opt_key == "model_id" || opt_key == "dev_model_name" || opt_key == "filament_settings_id")
                         continue;
+                    // rebuilt from every filament after this loop
+                    if (filament_dev_options.find(opt_key) != filament_dev_options.end())
+                        continue;
                     ConfigOption *opt = m_print_config.option(opt_key, true);
                     if (opt == nullptr) {
                         // opt_key does not exist in this ConfigBase and it cannot be created, because it is not defined by this->def().
@@ -3681,6 +3684,14 @@ int CLI::run(int argc, char **argv)
             }
         }
 
+        // The stored values cannot be told apart per filament, so they are kept as they are unless every slot has a config.
+        std::vector<const DynamicPrintConfig *> filament_configs(filament_count, nullptr);
+        for (size_t index = 0; index < load_filaments_config.size(); index++)
+            if (load_filaments_index[index] >= 1 && load_filaments_index[index] <= filament_count)
+                filament_configs[load_filaments_index[index] - 1] = &load_filaments_config[index];
+        if (std::find(filament_configs.begin(), filament_configs.end(), nullptr) == filament_configs.end())
+            set_filament_dev_options(m_print_config, filament_configs);
+
         if (m_print_config.option<ConfigOptionStrings>("filament_extruder_variant")) {
             std::vector<int>& filament_self_indice = m_print_config.option<ConfigOptionInts>("filament_self_index", true)->values;
             int index_size = m_print_config.option<ConfigOptionStrings>("filament_extruder_variant")->size();

src/dev-utils/platform/osx/entitlements.plist

@@ -5,5 +5,10 @@
   <!-- for dynamic loading of libraries without signature validation. Used for 3dconnection drivers.-->
   <key>com.apple.security.cs.disable-library-validation</key>  
   <true/>
+  <!-- The Bambu network plug-in's code protector rewrites one of its own signed code pages
+       after loading. Under the hardened runtime macOS kills the process when that page is
+       paged back in; this lets it run, as Bambu Studio's signature does. -->
+  <key>com.apple.security.cs.allow-unsigned-executable-memory</key>
+  <true/>
 </dict>
 </plist>

src/libslic3r/PrintConfig.cpp

@@ -10822,6 +10822,22 @@ void normalize_filament_values_to_variants(DynamicPrintConfig &config)
     }
 }
 
+void set_filament_dev_options(DynamicPrintConfig &config, const std::vector<const DynamicPrintConfig *> &filament_configs)
+{
+    for (const std::string &key : filament_dev_options) {
+        if (std::none_of(filament_configs.begin(), filament_configs.end(), [&key](const DynamicPrintConfig *filament) { return filament->has(key); }))
+            continue;
+        const ConfigOption *default_value = print_config_def.get(key)->default_value.get();
+        auto *dst = static_cast<ConfigOptionVectorBase *>(config.option(key, true));
+        dst->clear();
+        for (const DynamicPrintConfig *filament : filament_configs) {
+            const auto *src = static_cast<const ConfigOptionVectorBase *>(filament->has(key) ? filament->option(key) : default_value);
+            if (!src->empty())
+                dst->append(src);
+        }
+    }
+}
+
 
 //used for object/region config
 //use the smallest of multiple to single
@@ -11520,12 +11536,18 @@ void DynamicPrintConfig::update_non_diff_values_to_base_config(DynamicPrintConfi
     int cur_variant_count = cur_extruder_variants.size();
     int target_variant_count = target_extruder_variants.size();
 
+    // A base variant this config does not list (the base gained it after the config was saved, or the
+    // config lists none) takes this config's first variant of the same extruder, as a user preset's
+    // values do in update_diff_values_to_child_config. Left unmatched, the base's value would silently
+    // replace the user's.
     variant_index.resize(target_variant_count, -1);
     if (cur_variant_count == 0) {
         // Defensive: target_variant_count may be 0 if the preset doesn't carry extruder_variant_name.
         // In that case keep variant_index empty and let the downstream size checks produce a useful error.
         if (!variant_index.empty())
-            variant_index[0] = 0;
+            // This config's one value belongs to the extruder of the base's first variant.
+            variant_index = map_variant_indices(target_extruder_variants, target_extruder_ids, {},
+                                                target_extruder_ids.empty() ? std::vector<int>() : std::vector<int>{target_extruder_ids[0]});
     }
     else if ((cur_extruder_ids.size() > 0) && cur_variant_count != cur_extruder_ids.size()){
         //should not happen
@@ -11538,18 +11560,7 @@ void DynamicPrintConfig::update_non_diff_values_to_base_config(DynamicPrintConfi
              %extruder_variant_name %target_variant_count %extruder_id_name %target_extruder_ids.size();
     }
     else {
-        for (int i = 0; i < target_variant_count; i++)
-        {
-            for (int j = 0; j < cur_variant_count; j++)
-            {
-                if ((target_extruder_variants[i] == cur_extruder_variants[j])
-                    &&(target_extruder_ids.empty() || (target_extruder_ids[i] == cur_extruder_ids[j])))
-                {
-                    variant_index[i] = j;
-                    break;
-                }
-            }
-        }
+        variant_index = map_variant_indices(target_extruder_variants, target_extruder_ids, cur_extruder_variants, cur_extruder_ids);
     }
 
     for (auto& opt : keys) {
@@ -11574,6 +11585,13 @@ void DynamicPrintConfig::update_non_diff_values_to_base_config(DynamicPrintConfi
                     if (cur_variant_count > target_variant_count)
                         continue;
 
+                    // The variant lists are the base's layout itself, which every other value is
+                    // carried onto: a variant this config lacks keeps its own name and id.
+                    if (opt == extruder_id_name || opt == extruder_variant_name) {
+                        opt_src->set(opt_target);
+                        continue;
+                    }
+
                     int stride = 1;
                     if (key_set2.find(opt) != key_set2.end())
                         stride = 2;

src/libslic3r/PrintConfig.hpp

@@ -928,6 +928,11 @@ void normalize_filament_values_to_variants(DynamicPrintConfig &config);
 
 extern std::set<std::string> filament_dev_options;
 
+// Orca: a filament_dev_options option holds several values per filament, and how many is up to the
+// filament preset, so one filament's values cannot be replaced in place. This rebuilds each option from
+// filament_configs, one config per filament in slot order, as the filaments' values one after another.
+void set_filament_dev_options(DynamicPrintConfig &config, const std::vector<const DynamicPrintConfig *> &filament_configs);
+
 extern void update_static_print_config_from_dynamic(ConfigBase& config, const DynamicPrintConfig& dest_config, std::vector<int> variant_index, std::set<std::string>& key_set1, int stride = 1);
 extern void compute_filament_override_value(const std::string& opt_key, const ConfigOption *opt_old_machine, const ConfigOption *opt_new_machine, const ConfigOption *opt_new_filament, const DynamicPrintConfig& new_full_config,
     t_config_option_keys& diff_keys, DynamicPrintConfig& filament_overrides, std::vector<int>& f_map_indices);

src/slic3r/GUI/AMSMaterialsSetting.cpp

@@ -974,8 +974,8 @@ bool AMSMaterialsSetting::Show(bool show)
 
 static void _collect_filament_info(const wxString& shown_name,
                                    const Preset& filament,
-                                   unordered_map<wxString, wxString>& query_filament_vendors,
-                                   unordered_map<wxString, wxString>& query_filament_types)
+                                   std::unordered_map<wxString, wxString>& query_filament_vendors,
+                                   std::unordered_map<wxString, wxString>& query_filament_types)
 {
     query_filament_vendors[shown_name] = filament.config.get_filament_vendor();
     query_filament_types[shown_name] = filament.config.get_filament_type();

src/slic3r/GUI/Auxiliary.cpp

@@ -856,14 +856,14 @@ void AuxiliaryPanel::Split(const std::string &src, const std::string &separator,
     dest.clear();
     index = str.find_first_of(separator, start);
     do {
-        if (index != string::npos) {
+        if (index != std::string::npos) {
             substring = str.substr(start, index - start);
             dest.push_back(substring);
             start = index + separator.size();
             index = str.find(separator, start);
-            if (start == string::npos) break;
+            if (start == std::string::npos) break;
         }
-    } while (index != string::npos);
+    } while (index != std::string::npos);
 
     // the last part
     substring = str.substr(start);

src/slic3r/GUI/CalibrationWizardPresetPage.cpp

@@ -1307,7 +1307,7 @@ void CalibrationPresetPage::stripWhiteSpace(std::string& str)
 {
     if (str == "") { return; }
 
-    string::iterator cur_it;
+    std::string::iterator cur_it;
     cur_it = str.begin();
 
     while (cur_it != str.end()) {
@@ -2597,7 +2597,7 @@ void CalibrationPresetPage::update_multi_extruder_filament_combobox(const std::s
     int ams_id_int = 0;
     try {
         if (!ams_id.empty())
-            ams_id_int = stoi(ams_id.c_str());
+            ams_id_int = std::stoi(ams_id.c_str());
 
     } catch (...) {}
 
@@ -2685,7 +2685,7 @@ void CalibrationPresetPage::update_filament_combobox(std::string ams_id)
     int ams_id_int = 0;
     try {
         if (!ams_id.empty())
-            ams_id_int = stoi(ams_id.c_str());
+            ams_id_int = std::stoi(ams_id.c_str());
 
     } catch (...) {}
 

src/slic3r/GUI/CreatePresetsDialog.cpp

@@ -347,7 +347,7 @@ static std::string get_curr_timestmp()
     // return timestampString;
 }
 
-static void get_filament_compatible_printer(Preset* preset, vector<std::string>& printers)
+static void get_filament_compatible_printer(Preset* preset, std::vector<std::string>& printers)
 {
     auto compatible_printers = dynamic_cast<ConfigOptionStrings *>(preset->config.option("compatible_printers"));
     if (compatible_printers == nullptr) return;
@@ -1581,7 +1581,7 @@ void CreateFilamentPresetDialog::sort_printer_by_nozzle(std::vector<std::pair<st
 {
     std::unordered_map<std::string, float> nozzle_diameter = nozzle_diameter_map;
     std::sort(printer_name_to_filament_preset.begin(), printer_name_to_filament_preset.end(),
-              [&nozzle_diameter](const std::pair<string, T> &a, const std::pair<string, T> &b) {
+              [&nozzle_diameter](const std::pair<std::string, T> &a, const std::pair<std::string, T> &b) {
                   size_t nozzle_index_a = a.first.find(" nozzle");
                   size_t nozzle_index_b = b.first.find(" nozzle");
                   if (nozzle_index_a == std::string::npos || nozzle_index_b == std::string::npos) return a.first < b.first;
@@ -3143,7 +3143,7 @@ void CreatePrinterPresetDialog::set_current_visible_printer()
 
 wxArrayString CreatePrinterPresetDialog::printer_preset_sort_with_nozzle_diameter(const VendorProfile &vendor_profile, float nozzle_diameter)
 {
-    std::vector<pair<float, std::string>> preset_sort;
+    std::vector<std::pair<float, std::string>> preset_sort;
 
     auto get_nozzle_size_for_printer_model = [this](const std::string & model_name) -> size_t {
         auto iter = m_printer_name_to_preset.find(model_name);
@@ -4964,7 +4964,7 @@ wxBoxSizer *CreatePresetForPrinterDialog::create_selected_filament_preset_sizer(
 
     m_selected_printer->Bind(wxEVT_COMBOBOX, [this](wxCommandEvent &e) {
         wxString printer_name = m_selected_printer->GetStringSelection();
-        std::unordered_map<string, std::vector<std::shared_ptr<Preset>>>::iterator filament_iter = m_printer_compatible_filament_presets.find(into_u8(printer_name));
+        std::unordered_map<std::string, std::vector<std::shared_ptr<Preset>>>::iterator filament_iter = m_printer_compatible_filament_presets.find(into_u8(printer_name));
         if (m_printer_compatible_filament_presets.end() != filament_iter) {
             filament_choice_to_filament_preset.clear();
             wxArrayString filament_choices;

src/slic3r/GUI/DeviceCore/DevFilaSystem.cpp

@@ -160,7 +160,7 @@ DevAms::~DevAms()
     m_trays.clear();
 }
 
-static unordered_map<int, wxString> s_ams_display_formats = {
+static std::unordered_map<int, wxString> s_ams_display_formats = {
     {DevAms::AMS,      "AMS-%d"},
     {DevAms::AMS_LITE, "AMS Lite-%d"},
     {DevAms::N3F,      "AMS 2 PRO-%d"},

src/slic3r/GUI/DeviceCore/DevMappingNozzle.cpp

@@ -250,7 +250,7 @@ int DevNozzleMappingCtrl::CtrlGetAutoNozzleMappingV1(Slic3r::GUI::Plater* plater
 
 void DevNozzleMappingCtrl::ParseAutoNozzleMapping(const json& print_jj)
 {
-    if (print_jj.contains("command") && print_jj["command"].get<string>() == "get_auto_nozzle_mapping") {
+    if (print_jj.contains("command") && print_jj["command"].get<std::string>() == "get_auto_nozzle_mapping") {
         if (print_jj.contains("sequence_id") && print_jj["sequence_id"] == m_sequence_id) {
             Clear();
             DevJsonValParser::ParseVal(print_jj, "result", m_result);

src/slic3r/GUI/DeviceCore/DevNozzleSystem.cpp

@@ -426,7 +426,7 @@ void DevNozzleSystem::ClearNozzles()
 
 // ---- parsing ----------------------------------------------------------------------------------------
 
-static unordered_map<string, NozzleFlowType> _str2_nozzle_flow_type = {
+static std::unordered_map<std::string, NozzleFlowType> _str2_nozzle_flow_type = {
     {"S", NozzleFlowType::S_FLOW},
     {"H", NozzleFlowType::H_FLOW},
     {"A", NozzleFlowType::S_FLOW},
@@ -436,7 +436,7 @@ static unordered_map<string, NozzleFlowType> _str2_nozzle_flow_type = {
     {"B", NozzleFlowType::E_FLOW}, // E3D High Flow -> nvtE3DHighFlow
 };
 
-static unordered_map<string, NozzleType> _str2_nozzle_type = {
+static std::unordered_map<std::string, NozzleType> _str2_nozzle_type = {
     {"00", NozzleType::ntStainlessSteel},
     {"01", NozzleType::ntHardenedSteel},
     {"05", NozzleType::ntTungstenCarbide}

src/slic3r/GUI/DeviceErrorDialog.cpp

@@ -368,7 +368,7 @@ wxString DeviceErrorDialog::parse_error_level(int error_code)
     }
 }
 
-static const std::unordered_set<string> s_jump_liveview_error_codes = { "0300-8003", "0300-8002", "0300-800A"};
+static const std::unordered_set<std::string> s_jump_liveview_error_codes = { "0300-8003", "0300-8002", "0300-800A"};
 wxString DeviceErrorDialog::show_error_code(int error_code)
 {
     if (m_error_code == error_code) { return wxEmptyString;}

src/slic3r/GUI/DeviceManager.cpp

@@ -110,6 +110,7 @@ using json = nlohmann::json;
 class wxWindow;
 
 namespace fs = boost::filesystem;
+using namespace std::chrono_literals;
 
 #define CALI_DEBUG
 #define MINUTE_30 1800000    //ms
@@ -3103,7 +3104,7 @@ int MachineObject::parse_json(std::string tunnel, std::string payload, bool key_
                         DevFirmwareVersionInfo ver_info;
                         ver_info.name = (*it)["name"].get<std::string>();
                         if ((*it).contains("product_name"))
-                            ver_info.product_name = wxString::FromUTF8((*it)["product_name"].get<string>());
+                            ver_info.product_name = wxString::FromUTF8((*it)["product_name"].get<std::string>());
                         if ((*it).contains("sw_ver"))
                             ver_info.sw_ver = (*it)["sw_ver"].get<std::string>();
                         if ((*it).contains("sw_new_ver"))

src/slic3r/GUI/EditGCodeDialog.cpp

@@ -294,8 +294,8 @@ wxDataViewItem EditGCodeDialog::add_presets_placeholders()
 
 
     // Orca: create subgroups from the pages of the tabs
-    auto init_from_tab = [this, full_config](wxDataViewItem parent, Tab* tab, const set<string>& preset_keys){
-        set extra_keys(preset_keys);
+    auto init_from_tab = [this, full_config](wxDataViewItem parent, Tab* tab, const std::set<std::string>& preset_keys){
+        std::set extra_keys(preset_keys);
         for (const auto& page : tab->m_pages) {
             // ORCA: Pull icons from tabs for subgroups, icons are hidden on tabs
             std::string icon_name = "empty"; // use empty icon if not defined
@@ -549,7 +549,7 @@ void ParamsNode::RefreshSearch(const wxString& search_text)
 
     if (GetEnabledChildren().empty())
         if (auto pos = text.find(search_text); IsParamNode() && pos != wxString::npos) {
-            m_highlight_index = make_unique<pair<int, int>>(pos, search_text.Len());
+            m_highlight_index = make_unique<std::pair<int, int>>(pos, search_text.Len());
             Enable();
         } else {
             Disable();

src/slic3r/GUI/Field.cpp

@@ -702,11 +702,11 @@ void Field::get_value_by_opt_type(wxString& str, const bool check_value/* = true
                 set_value(str, true);
             }
         } else if (m_opt.opt_key == "sparse_infill_rotate_template" || m_opt.opt_key == "solid_infill_rotate_template") {
-            string ustr(str.utf8_string());
+            std::string ustr(str.utf8_string());
             if (!ConfigOptionFloats::validate_string(ustr)) {
-                string      v;
+                std::string v;
                 std::smatch match;
-                string      ps = (m_opt.opt_key == "sparse_infill_rotate_template") ?
+                std::string ps = (m_opt.opt_key == "sparse_infill_rotate_template") ?
                                      u8"[BT][!]?|[#][\\d]+[!]?|[+\\-]?[\\d.]+[%]?[*]?[\\d]*[/NnZz$LlUuQq~^|#]?[+\\-]?[\\d.]*[%#\'\"cm]?[m]?[BT]?[!*]?" :
                                      u8"[#][\\d]+[!]?|[+\\-]?[\\d.]+[%]?[*]?[\\d]*[/NnZz$LlUuQq~^|#]?[+\\-]?[\\d.]*[%#\'\"cm]?[m]?[!*]?";
 
@@ -729,7 +729,7 @@ void Field::get_value_by_opt_type(wxString& str, const bool check_value/* = true
             }
             break;
         } else if (m_opt.opt_key == "extra_solid_infills") {
-            string ustr(str.utf8_string());
+            std::string ustr(str.utf8_string());
             // New rule: accept either interval form (N or N#K) or explicit list (e.g. 1,7,9), with optional quotes.
             const std::regex rx_interval(u8R"(^\s*['"]?\s*\d+\s*(?:#\s*\d*)?\s*['"]?\s*$)");
             // List entries may be plain numbers or number with optional #K count, e.g., 5, 9#2, 18

src/slic3r/GUI/GCodeViewer.cpp

@@ -94,6 +94,8 @@
 #include "slic3r/GUI/Gizmos/GizmoObjectManipulation.hpp"
 #include "slic3r/GUI/PartPlate.hpp"
 
+using namespace std::string_view_literals;
+
 namespace Slic3r { class PrintBase; }
 
 
@@ -3184,7 +3186,7 @@ void GCodeViewer::render_legend_color_arr_recommen(float window_padding)
     float ams_item_height = 0;
     float filament_group_item_align_width = 0;
     {
-        float three_words_width    = imgui.calc_text_size(std::string_view("ABC")).x;
+        float three_words_width    = imgui.calc_text_size("ABC"sv).x;
         const int line_capacity = 4;
 
         for (const auto& extruder_filaments : {m_left_extruder_filament,m_right_extruder_filament })

src/slic3r/GUI/GLCanvas3D.cpp

@@ -177,6 +177,8 @@ extern wxPopupWindow* wxCurrentPopupWindow;
 #endif
 #endif
 
+using namespace std::string_view_literals;
+
 static constexpr const float TRACKBALLSIZE = 0.8f;
 
 static Slic3r::ColorRGBA DEFAULT_BG_LIGHT_COLOR      = { 0.906f, 0.906f, 0.906f, 1.0f };

src/slic3r/GUI/GUI_App.cpp

@@ -9040,7 +9040,7 @@ std::map<std::string, std::string> GUI_App::get_delete_cache_presets_lock()
 
 void GUI_App::process_delete_presets()
 {
-    std::map<string, string> delete_cache_presets = get_delete_cache_presets_lock();
+    std::map<std::string, std::string> delete_cache_presets = get_delete_cache_presets_lock();
     for (auto it = delete_cache_presets.begin(); it != delete_cache_presets.end();) {
         if (it->first.empty()) continue;
         std::string del_setting_id = it->first;
@@ -10068,7 +10068,7 @@ bool is_soluble_filament(int extruder_id)
     return support_option->get_at(0);
 };
 
-bool has_filaments(const std::vector<string>& model_filaments) {
+bool has_filaments(const std::vector<std::string>& model_filaments) {
     auto &filament_presets = Slic3r::GUI::wxGetApp().preset_bundle->filament_presets;
     if (!Slic3r::GUI::wxGetApp().plater()) return false;
     auto model_objects = Slic3r::GUI::wxGetApp().plater()->model().objects;
@@ -10103,7 +10103,7 @@ bool is_support_filament(int extruder_id, bool strict_check)
     Slic3r::ConfigOptionBools *support_option = dynamic_cast<Slic3r::ConfigOptionBools *>(filament->config.option("filament_is_support"));
 
     if(!strict_check &&(filament_type == "PETG" || filament_type == "PLA")) {
-        std::vector<string> model_filaments;
+        std::vector<std::string> model_filaments;
         if (filament_type == "PETG")
             model_filaments.emplace_back("PLA");
         else {

src/slic3r/GUI/GUI_ObjectList.cpp

@@ -1108,7 +1108,7 @@ void ObjectList::update_name_column_width() const
         }
     }
 
-    GetColumn(colName)->SetWidth(max(0, client_size.x - (others_width)*em));
+    GetColumn(colName)->SetWidth(std::max(0, client_size.x - (others_width)*em));
 }
 
 void ObjectList::set_filament_column_hidden(const bool hide) const
@@ -3970,7 +3970,7 @@ wxDataViewItem ObjectList::add_settings_item(wxDataViewItem parent_item, const D
         if (config->opt_float("layer_height") == object_cfg->opt_float("layer_height")) {
             SettingsFactory::Bundle new_cat_options;
             for (auto cat_opt : cat_options) {
-                std::vector<string> temp;
+                std::vector<std::string> temp;
                 for (auto value : cat_opt.second) {
                     if (value != "layer_height")
                         temp.push_back(value);

src/slic3r/GUI/Gizmos/GizmoObjectManipulation.cpp

@@ -44,6 +44,8 @@
 #define MAX_NUM 9999.99
 #define MAX_SIZE std::string_view{"9999.99"}
 
+using namespace std::string_view_literals;
+
 namespace Slic3r
 {
 namespace GUI

src/slic3r/GUI/HMS.cpp

@@ -33,7 +33,7 @@ static const char* HMS_LOCAL_IMG_PATH = "hms/local_image";
 
 // the local HMS info
 // Orca: dev-id-type set trimmed to the devices Orca ships local HMS images for
-static unordered_set<string> package_dev_id_types {"094", "239", "093", "22E"};
+static std::unordered_set<std::string> package_dev_id_types {"094", "239", "093", "22E"};
 
 // Orca: HMS should be disabled when stealth mode is on or networking is not installed
 static bool should_disable_hms()
@@ -345,17 +345,17 @@ wxString HMSQuery::query_hms_msg(const std::string& dev_id, const std::string& l
     return _query_hms_msg(dev_id.substr(0, 3), long_error_code, lang_code);
 }
 
-string HMSQuery::get_dev_id_type(const MachineObject* obj) const
+std::string HMSQuery::get_dev_id_type(const MachineObject* obj) const
 {
     if (obj)
     {
         return obj->get_dev_id().substr(0, 3);
     }
 
-    return string();
+    return std::string();
 }
 
-wxString HMSQuery::_query_hms_msg(const string& dev_id_type, const string& long_error_code, const string& lang_code)
+wxString HMSQuery::_query_hms_msg(const std::string& dev_id_type, const std::string& long_error_code, const std::string& lang_code)
 {
     if (long_error_code.empty())
     {
@@ -426,9 +426,9 @@ wxString HMSQuery::_query_hms_msg(const string& dev_id_type, const string& long_
     return wxEmptyString;
 }
 
-bool HMSQuery::_is_internal_error(const string &dev_id_type,
-                                  const string &error_code,
-                                  const string &lang_code)
+bool HMSQuery::_is_internal_error(const std::string &dev_id_type,
+                                  const std::string &error_code,
+                                  const std::string &lang_code)
 {
     init_hms_info(dev_id_type);
     auto iter = m_hms_info_jsons.find(dev_id_type);

src/slic3r/GUI/Jobs/PrintJob.cpp

@@ -335,7 +335,7 @@ void PrintJob::process(Ctl &ctl)
         auto origin_profile_id = model_info->metadata_items.find(BBL_DESIGNER_PROFILE_ID_TAG);
         if (origin_profile_id != model_info->metadata_items.end()) {
             try {
-                params.origin_profile_id    = stoi(origin_profile_id->second.c_str());
+                params.origin_profile_id    = std::stoi(origin_profile_id->second.c_str());
             }
             catch(...) {}
         }

src/slic3r/GUI/NotificationManager.cpp

@@ -536,12 +536,12 @@ void NotificationManager::PopNotification::count_lines()
 		return;
 
 	// handle with marks
-    if (pos_start == string::npos && pos_end == string::npos) {
+    if (pos_start == std::string::npos && pos_end == std::string::npos) {
         pos_start = text.find(error_start);
-        if (pos_start != string::npos) {
+        if (pos_start != std::string::npos) {
             text.erase(pos_start, error_start.length());
             pos_end = text.find(error_end);
-            if (pos_end != string::npos) {
+            if (pos_end != std::string::npos) {
                 text.erase(pos_end, error_end.length());
             }
         }
@@ -675,7 +675,7 @@ void NotificationManager::PopNotification::bbl_render_block_notif_text(ImGuiWrap
 			if (m_text1.size() > m_endlines[i])
 				last_end += (m_text1[m_endlines[i]] == '\n' || m_text1[m_endlines[i]] == ' ' ? 1 : 0);
 
-			if (pos_start != string::npos && pos_end != string::npos && m_endlines[i] - line.length() >= pos_start && m_endlines[i] <= pos_end) {
+			if (pos_start != std::string::npos && pos_end != std::string::npos && m_endlines[i] - line.length() >= pos_start && m_endlines[i] <= pos_end) {
 				push_style_color(ImGuiCol_Text, m_ErrorColor, m_state == EState::FadingOut, m_current_fade_opacity);
 				imgui.text(line.c_str());
 				ImGui::PopStyleColor();
@@ -737,7 +737,7 @@ void NotificationManager::PopNotification::render_text(ImGuiWrapper& imgui, cons
 			if (m_text1.size() > m_endlines[i])
 				last_end += (m_text1[m_endlines[i]] == '\n' || m_text1[m_endlines[i]] == ' ' ? 1 : 0);
 
-            if (pos_start != string::npos && pos_end != string::npos&& m_endlines[i] - line.length() >= pos_start && m_endlines[i] <= pos_end) {
+            if (pos_start != std::string::npos && pos_end != std::string::npos&& m_endlines[i] - line.length() >= pos_start && m_endlines[i] <= pos_end) {
                 push_style_color(ImGuiCol_Text, m_ErrorColor, m_state == EState::FadingOut, m_current_fade_opacity);
                 imgui.text(line.c_str());
                 ImGui::PopStyleColor();

src/slic3r/GUI/PartSkipDialog.cpp

@@ -86,7 +86,7 @@ PartSkipDialog::PartSkipDialog(wxWindow *parent) : DPIDialog(parent, wxID_ANY, _
 {
     std::time_t       t = std::time(0);
     std::stringstream buf;
-    buf << put_time(std::localtime(&t), "%a_%b_%d_%H_%M_%S/");
+    buf << std::put_time(std::localtime(&t), "%a_%b_%d_%H_%M_%S/");
     m_timestamp = buf.str();
 
     SetBackgroundColour(*wxWHITE);
@@ -402,7 +402,7 @@ std::string PartSkipDialog::create_tmp_path()
     return tmp_path;
 }
 
-bool PartSkipDialog::is_local_file_existed(const std::vector<string> &local_paths)
+bool PartSkipDialog::is_local_file_existed(const std::vector<std::string> &local_paths)
 {
     for (auto path : local_paths) {
         if (!std::filesystem::exists(path)) { return false; }
@@ -703,8 +703,8 @@ void PartSkipDialog::InitDialogUI()
     m_parts_state.clear();
     m_parts_name.clear();
 
-    string pick_img   = m_local_paths[0];
-    string slice_info = m_local_paths[2];
+    std::string pick_img   = m_local_paths[0];
+    std::string slice_info = m_local_paths[2];
 
     m_switch_drag_btn->SetIcon("canvas_drag");
     m_switch_drag_btn->SetBackgroundColor(*wxWHITE);

src/slic3r/GUI/PartSkipDialog.hpp

@@ -139,11 +139,11 @@ private:
     boost::shared_ptr<PrinterFileSystem> m_file_sys;
     std::string                          m_timestamp;
     std::string                          m_tmp_path;
-    std::vector<string>                  m_local_paths;
-    std::vector<string>                  m_target_paths;
+    std::vector<std::string>             m_local_paths;
+    std::vector<std::string>             m_target_paths;
     std::string                          create_tmp_path();
 
-    bool is_local_file_existed(const std::vector<string> &local_paths);
+    bool is_local_file_existed(const std::vector<std::string> &local_paths);
 
     void DownloadPartsFile();
     void OnFileSystemEvent(wxCommandEvent &event);

src/slic3r/GUI/Plater.cpp

@@ -357,7 +357,7 @@ wxDEFINE_EVENT(EVT_NOTICE_FULL_SCREEN_CHANGED, IntEvent);
 #define PRINTER_PANEL_RADIUS (6) // ORCA
 #define BTN_SYNC_SIZE (wxSize(FromDIP(96), FromDIP(98)))
 
-static string get_diameter_string(float diameter)
+static std::string get_diameter_string(float diameter)
 {
     std::ostringstream stream; // ORCA ensure 0.25 returned as 0.25. previous code returned as 0.2 because of std::setprecision(1)
     stream << std::fixed << std::setprecision(2) << diameter;  // Use 2 decimals to capture 0.25 / 0.15 reliably
@@ -6323,7 +6323,7 @@ void Sidebar::sync_ams_list(bool is_from_big_sync_btn)
     }
 
     // BBS:Record consumables information before synchronization
-    std::vector<string> color_before_sync;
+    std::vector<std::string> color_before_sync;
     std::vector<bool>   is_support_before;
     DynamicPrintConfig& project_config = wxGetApp().preset_bundle->project_config;
     ConfigOptionStrings* color_opt = project_config.option<ConfigOptionStrings>("filament_colour");
@@ -12762,7 +12762,7 @@ void Plater::priv::on_select_preset(wxCommandEvent &evt)
     Vec3d old_plate_pos = old_plate->get_center_origin();
 
     // BBS: Save the model in the current platelist
-    std::vector<vector<int> > plate_object;
+    std::vector<std::vector<int> > plate_object;
     for (size_t i = 0; i < old_plate_list.get_plate_count(); ++i) {
         PartPlate* plate = old_plate_list.get_plate(i);
         std::vector<int> obj_idxs;
@@ -17975,7 +17975,7 @@ bool Plater::load_files(const wxArrayString& filenames)
 
     // Orca: Iters through given paths and imports files from zip then remove zip from paths
     // returns true if zip files were found
-    auto handle_zips = [this](vector<fs::path>& paths) { // NOLINT(*-no-recursion) - Recursion is intended and should be managed properly
+    auto handle_zips = [this](std::vector<fs::path>& paths) { // NOLINT(*-no-recursion) - Recursion is intended and should be managed properly
         bool res = false;
         for (auto it = paths.begin(); it != paths.end();) {
             if (boost::algorithm::iends_with(it->string(), ".zip")) {

src/slic3r/GUI/Preferences.cpp

@@ -378,7 +378,7 @@ wxBoxSizer *PreferencesDialog::create_item_combobox(wxString title, wxString too
 
     auto current_setting = app_config->get(param);
     if (!current_setting.empty()) {
-        auto compare  = [current_setting](string possible_setting) { return current_setting == possible_setting; };
+        auto compare  = [current_setting](std::string possible_setting) { return current_setting == possible_setting; };
         auto iterator = find_if(config_name_index.begin(), config_name_index.end(), compare);
         if (iterator != config_name_index.end())
             current_index = static_cast<unsigned int>(iterator - config_name_index.begin());
@@ -1714,7 +1714,7 @@ void PreferencesDialog::create_items()
     g_sizer->Add(create_item_title(_L("Project")), 1, wxEXPAND);
 
     std::vector<wxString> projectLoadSettingsBehaviourOptions = {_L("Load All"), _L("Ask When Relevant"), _L("Always Ask"), _L("Load Geometry Only")};
-    std::vector<string>   projectLoadSettingsConfigOptions    = { OPTION_PROJECT_LOAD_BEHAVIOUR_LOAD_ALL, OPTION_PROJECT_LOAD_BEHAVIOUR_ASK_WHEN_RELEVANT, OPTION_PROJECT_LOAD_BEHAVIOUR_ALWAYS_ASK, OPTION_PROJECT_LOAD_BEHAVIOUR_LOAD_GEOMETRY };
+    std::vector<std::string> projectLoadSettingsConfigOptions    = { OPTION_PROJECT_LOAD_BEHAVIOUR_LOAD_ALL, OPTION_PROJECT_LOAD_BEHAVIOUR_ASK_WHEN_RELEVANT, OPTION_PROJECT_LOAD_BEHAVIOUR_ALWAYS_ASK, OPTION_PROJECT_LOAD_BEHAVIOUR_LOAD_GEOMETRY };
     auto item_project_load     = create_item_combobox(_L("Load behavior"), _L("Should printer/filament/process settings be loaded when opening a 3MF file?"), SETTING_PROJECT_LOAD_BEHAVIOUR, projectLoadSettingsBehaviourOptions, projectLoadSettingsConfigOptions);
     g_sizer->Add(item_project_load);
 

src/slic3r/GUI/Project.cpp

@@ -239,7 +239,7 @@ void ProjectPanel::on_reload(wxCommandEvent& evt)
         }
 
         bool has_content = false;
-        for (const string& v : {
+        for (const std::string& v : {
                  update_type,
                  license,
                  model_name,

src/slic3r/GUI/SelectMachine.cpp

@@ -182,7 +182,7 @@ std::string get_nozzle_volume_type_cloud_string(NozzleVolumeType nozzle_volume_t
 static int s_nozzle_mapping_last_request_time = 0;
 
 std::vector<wxString> SelectMachineDialog::MACHINE_BED_TYPE_STRING;
-std::vector<string> SelectMachineDialog::MachineBedTypeString;
+std::vector<std::string> SelectMachineDialog::MachineBedTypeString;
 void                SelectMachineDialog::init_machine_bed_types()
 {
     if (MACHINE_BED_TYPE_STRING.size() == 0) {
@@ -2748,8 +2748,8 @@ void SelectMachineDialog::on_ok_btn(wxCommandEvent &event)
     std::vector<ConfirmBeforeSendInfo> confirm_text;
 
     // check more than one using in same external spool
-    std::unordered_set<string> main_external_spool_filas;
-    std::unordered_set<string> deputy_external_spool_filas;
+    std::unordered_set<std::string> main_external_spool_filas;
+    std::unordered_set<std::string> deputy_external_spool_filas;
     for (const auto& mapping_info : m_ams_mapping_result) {
         if (mapping_info.ams_id == VIRTUAL_AMS_MAIN_ID_STR){
             main_external_spool_filas.insert(mapping_info.filament_id);
@@ -5239,7 +5239,7 @@ void SelectMachineDialog::update_show_status(MachineObject* obj_)
 
     /*Check high temperture slicing*/
     if (m_print_type == PrintFromType::FROM_NORMAL) {
-        std::set<string>  high_temp_filaments;
+        std::set<std::string> high_temp_filaments;
         std::unordered_set<int> known_fila_soften_extruders;
         std::unordered_set<int> unknown_fila_soften_extruders;
         auto preset_full_config = wxGetApp().preset_bundle->full_config();

src/slic3r/GUI/SelectMachine.hpp

@@ -337,7 +337,7 @@ private:
     wxColour                            m_colour_bold_color{wxColour(38, 46, 48)};
     StateColor                          m_btn_bg_enable;
 
-    std::unordered_map<string, PrintOption*> m_checkbox_list;
+    std::unordered_map<std::string, PrintOption*> m_checkbox_list;
     std::list<PrintOption*>                  m_checkbox_list_order;
 
     std::shared_ptr<int>                m_token = std::make_shared<int>(0);

src/slic3r/GUI/SendToPrinter.cpp

@@ -126,7 +126,7 @@ void SendToPrinterDialog::stripWhiteSpace(std::string& str)
 {
     if (str == "") { return; }
 
-    string::iterator cur_it;
+    std::string::iterator cur_it;
     cur_it = str.begin();
 
     while (cur_it != str.end()) {

src/slic3r/GUI/StatusPanel.hpp

@@ -171,7 +171,7 @@ public:
     std::string current_nozzle_loc = "";
     wxColour m_colour;
 
-    string m_file_name;
+    std::string m_file_name;
     bool   m_ams_loading{false};
     void   doRender(wxDC &dc);
     ExtruderImage(wxWindow *parent, wxWindowID id, int nozzle_num, const wxPoint &pos = wxDefaultPosition, const wxSize &size = wxDefaultSize);
@@ -244,7 +244,7 @@ protected:
     {
         wxString          local_image_url; //local image path
         std::string       img_url_paths; // oss url path
-        vector<wxPanel *> image_broad;
+        std::vector<wxPanel *> image_broad;
         bool              is_selected;
         bool              is_uploaded; // load
         wxBoxSizer *      image_tb_broad = nullptr;

src/slic3r/GUI/SyncAmsInfoDialog.cpp

@@ -1576,7 +1576,7 @@ bool SyncAmsInfoDialog::is_nozzle_type_match(DevExtderSystem data, wxString &err
         }
     }
 
-    vector<int> map_extruders = {1, 0};
+    std::vector<int> map_extruders = {1, 0};
 
     // The default two extruders are left, right, but the order of the extruders on the machine is right, left.
     std::vector<std::string> flow_type_of_machine;
@@ -1676,7 +1676,7 @@ void SyncAmsInfoDialog::stripWhiteSpace(std::string &str)
 {
     if (str == "") { return; }
 
-    string::iterator cur_it;
+    std::string::iterator cur_it;
     cur_it = str.begin();
 
     while (cur_it != str.end()) {

src/slic3r/GUI/Tab.cpp

@@ -2257,7 +2257,7 @@ void Tab::on_value_change(const std::string& opt_key, const boost::any& value)
             wxGetApp().plater()->update();
     }
 
-    string opt_key_without_idx = opt_key.substr(0, opt_key.find('#'));
+    std::string opt_key_without_idx = opt_key.substr(0, opt_key.find('#'));
 
     if (opt_key_without_idx == "long_retractions_when_cut") {
         unsigned char activate = boost::any_cast<unsigned char>(value);

src/slic3r/GUI/WebGuideDialog.cpp

@@ -1682,13 +1682,13 @@ int GuideFrame::SaveProfileData()
     return 0;
 }
 
-void StringReplace(string &strBase, string strSrc, string strDes)
+void StringReplace(std::string &strBase, std::string strSrc, std::string strDes)
 {
-    string::size_type pos    = 0;
-    string::size_type srcLen = strSrc.size();
-    string::size_type desLen = strDes.size();
+    std::string::size_type pos    = 0;
+    std::string::size_type srcLen = strSrc.size();
+    std::string::size_type desLen = strDes.size();
     pos                      = strBase.find(strSrc, pos);
-    while ((pos != string::npos)) {
+    while ((pos != std::string::npos)) {
         strBase.replace(pos, srcLen, strDes);
         pos = strBase.find(strSrc, (pos + desLen));
     }

src/slic3r/GUI/Widgets/AMSControl.cpp

@@ -1052,7 +1052,7 @@ void AMSControl::UpdateAms(const std::string   &series_name,
     /*update humidity popup*/
     if (m_percent_humidity_dry_popup->IsShown())
     {
-        string target_id = m_percent_humidity_dry_popup->get_owner_ams_id();
+        std::string target_id = m_percent_humidity_dry_popup->get_owner_ams_id();
         for (const auto& the_info : ams_info)
         {
             if (target_id == the_info.ams_id)

src/slic3r/GUI/Widgets/AMSControl.hpp

@@ -63,7 +63,7 @@ protected:
 
     std::string                      m_dev_id;
     std::vector<std::vector<std::string>> m_item_ids{ {}, {} };
-    std::vector<std::pair<string, string>> pair_id;
+    std::vector<std::pair<std::string, std::string>> pair_id;
 
     int         m_total_ext_count = 1;
     AMSextruder *m_extruder{nullptr};
@@ -181,7 +181,7 @@ public:
     std::tuple<bool, bool> isFilaSwitchReady();
     void show_switcher_status(bool show);
 
-    void UpdatePassRoad(string ams_id, AMSPassRoadType type, AMSPassRoadSTEP step);
+    void UpdatePassRoad(std::string ams_id, AMSPassRoadType type, AMSPassRoadSTEP step);
     void CreateAms();
     void CreateAmsDoubleNozzle(const std::string &series_name, const std::string& printer_type);
     void CreateAmsSingleNozzle(const std::string &series_name, const std::string &printer_type);

src/slic3r/GUI/Widgets/AMSItem.cpp

@@ -634,7 +634,7 @@ void AMSextruderImage::doRender(wxDC &dc)
 }
 
 
-AMSextruderImage::AMSextruderImage(wxWindow *parent, wxWindowID id, string file_name, const wxSize& size, const wxPoint &pos)
+AMSextruderImage::AMSextruderImage(wxWindow *parent, wxWindowID id, std::string file_name, const wxSize& size, const wxPoint &pos)
 {
     wxWindow::Create(parent, id, pos, size);
     SetBackgroundColour(StateColor::darkModeColorFor(*wxWHITE));
@@ -823,7 +823,7 @@ void SwitcherImage::doRender(wxDC &dc)
     Layout();
 }
 
-SwitcherImage::SwitcherImage(wxWindow *parent, wxWindowID id, string file_name, const wxSize& size, const wxPoint &pos)
+SwitcherImage::SwitcherImage(wxWindow *parent, wxWindowID id, std::string file_name, const wxSize& size, const wxPoint &pos)
 {
     wxWindow::Create(parent, id, pos, size);
     SetBackgroundColour(StateColor::darkModeColorFor(*wxWHITE));
@@ -899,7 +899,7 @@ void AMSextruder::OnAmsLoading(bool load, int nozzle_id, wxColour col /*= AMS_CO
 }
 
 /*return true if something is updated*/
-bool AMSextruder::updateNozzleNum(int nozzle_num, const string& series_name)
+bool AMSextruder::updateNozzleNum(int nozzle_num, const std::string& series_name)
 {
     if (m_nozzle_num == nozzle_num && m_series_name == series_name) return false;
     m_series_name = series_name;

src/slic3r/GUI/Widgets/AMSItem.hpp

@@ -393,10 +393,10 @@ public:
     bool            m_show_state = {false};
     wxColour        m_colour;
     ScalableBitmap  m_ams_extruder;
-    string m_file_name;
+    std::string m_file_name;
     bool            m_ams_loading{ false };
     void            doRender(wxDC &dc);
-    AMSextruderImage(wxWindow *parent, wxWindowID id, string file_name, const wxSize& size, const wxPoint &pos = wxDefaultPosition);
+    AMSextruderImage(wxWindow *parent, wxWindowID id, std::string file_name, const wxSize& size, const wxPoint &pos = wxDefaultPosition);
     ~AMSextruderImage();
 };
 
@@ -444,10 +444,10 @@ public:
     bool            m_show_state = {false};
     wxColour        m_colour;
     ScalableBitmap  m_switcher;
-    string m_file_name;
+    std::string m_file_name;
     // bool            m_ams_loading{ false };
     void            doRender(wxDC &dc);
-    SwitcherImage(wxWindow *parent, wxWindowID id, string file_name, const wxSize& size, const wxPoint &pos = wxDefaultPosition);
+    SwitcherImage(wxWindow *parent, wxWindowID id, std::string file_name, const wxSize& size, const wxPoint &pos = wxDefaultPosition);
     ~SwitcherImage();
 };
 
@@ -456,7 +456,7 @@ class AMSextruder : public wxWindow
 {
 private:
     int    m_nozzle_num = -1;
-    string m_series_name;
+    std::string m_series_name;
 
 public:
     void TurnOn(wxColour col);
@@ -466,7 +466,7 @@ public:
     void msw_rescale();
     void has_ams(bool hams) {m_has_vams = hams; Refresh();};
     void no_ams_mode(bool mode) {m_none_ams_mode = mode; Refresh();};
-    bool updateNozzleNum(int nozzle_num, const std::string& series_name = string());
+    bool updateNozzleNum(int nozzle_num, const std::string& series_name = std::string());
 
     bool            m_none_ams_mode{true};
     bool            m_has_vams{false};

src/slic3r/Utils/BBLNetworkPlugin.cpp

@@ -596,7 +596,8 @@ PrintParams_Legacy BBLNetworkPlugin::as_legacy(PrintParams& param)
 }
 
 // Every PrintParams field except the four the 02.08.01 series added
-// (task_timelapse_use_internal, extruder_cali_manual_mode, svc_context, slicer_uid).
+// (task_timelapse_use_internal, extruder_cali_manual_mode, svc_context, slicer_uid) and the
+// queue_plate_id 02.08.02 appended.
 PrintParams_0203 BBLNetworkPlugin::as_0203(PrintParams& param)
 {
     PrintParams_0203 p;

src/slic3r/Utils/bambu_networking.hpp

@@ -336,6 +336,7 @@ struct PrintParams {
     bool            try_emmc_print;
     std::string     svc_context;
     std::string     slicer_uid;
+    std::string     queue_plate_id;
 };
 
 struct TaskQueryParams
@@ -412,7 +413,7 @@ enum class NetworkAbi {
     Unsupported, // no generation in this build can call it - never dispatch through it
     Legacy,      // 01.10.01: PrintParams_Legacy; send_message/send_message_to_printer take no flag
     V0203,       // 02.03.00: PrintParams_0203; bind takes no dev_model
-    Current,     // 02.08.01: the layouts and signatures this build declares directly
+    Current,     // 02.08.04: the layouts and signatures this build declares directly
 };
 
 struct NetworkLibraryVersion {
@@ -425,10 +426,12 @@ struct NetworkLibraryVersion {
 };
 
 // Every row names the generation that can call it, so a series can never be offered without a
-// host-side ABI for it. Series with no generation - 02.01.01, 02.00.02 and older - must stay out;
-// is_supported_network_version() is the gate that keeps them from loading.
+// host-side ABI for it. Series with no generation - 02.08.01 (whose PrintParams lacks the
+// queue_plate_id that 02.08.02 appended, and whose malformed bind table macOS 27 refuses to
+// load), 02.01.01, 02.00.02 and older - must stay out; is_supported_network_version() is the
+// gate that keeps them from loading.
 static const NetworkLibraryVersion AVAILABLE_NETWORK_VERSIONS[] = {
-    {"02.08.01", "02.08.01", nullptr, true, nullptr, NetworkAbi::Current},
+    {"02.08.04", "02.08.04", nullptr, true, nullptr, NetworkAbi::Current},
     {"02.03.00", "02.03.00", nullptr, false,
      "An older plug-in series. Features that need newer plug-in support, such as print-failure "
      "snapshots in the device error dialog, are unavailable.", NetworkAbi::V0203},

src/slic3r/Utils/json_diff.hpp

@@ -7,9 +7,6 @@
 
 #include "nlohmann/json.hpp"
 
-
-using namespace std;
-
 class json_diff
 {
 private:

src/slic3r/plugin/PluginAuditManager.cpp

@@ -115,6 +115,9 @@ static const std::unordered_map<std::string, AuditEventCategory> audit_event_cat
     {"subprocess.Popen", AuditEventCategory::ProcessCreate},
     {"_winapi.CreateProcess", AuditEventCategory::ProcessCreate},
     {"_posixsubprocess.fork_exec", AuditEventCategory::ProcessCreate},
+
+    // threading
+    {"_thread.start_new_thread", AuditEventCategory::Threading},
 };
 
 // Returns the category event_name belongs to, or AuditEventCategory::None when it isn't audited.
@@ -346,20 +349,8 @@ std::vector<std::string> PluginAuditManager::default_denied_path_keywords()
     // must never be able to reach a secret, a certificate, or a configuration file just because
     // it happens to live inside an otherwise-allowed root (e.g. the bundled TLS client cert at
     // resources_dir()/cert/..., which would become reachable the moment resources_dir() is
-    // granted as a read-only allowed root). Match as whole path components, not substrings, so
-    // imports such as numpy/__config__.py and stdlib configparser.py remain usable.
-    return {"secret", "secrets", "cert", "certs", "certificate", "certificates", "conf", "config"};
-}
-
-static bool has_denied_config_extension(std::string name)
-{
-    const size_t stream_pos = name.find(':');
-    if (stream_pos != std::string::npos)
-        name.erase(stream_pos);
-
-    const boost::filesystem::path path(name);
-    const std::string extension = path.extension().string();
-    return extension == ".conf" || extension == ".ini";
+    // granted as a read-only allowed root).
+    return {"secret", "cert", "conf"};
 }
 
 bool PluginAuditManager::is_denied_path_keyword(const boost::filesystem::path& candidate) const
@@ -384,7 +375,7 @@ bool PluginAuditManager::is_denied_path_keyword(const boost::filesystem::path& c
             continue;
         std::transform(name.begin(), name.end(), name.begin(), [](unsigned char c) { return std::tolower(c); });
         for (const auto& keyword : m_denied_path_keywords) {
-            if (name == keyword || (keyword == "conf" && has_denied_config_extension(name)))
+            if (name.find(keyword) != std::string::npos)
                 return true;
         }
     }
@@ -747,6 +738,12 @@ std::vector<std::string> audit_targets(const std::string& event_name, AuditEvent
         }
         return targets;
     }
+    case AuditEventCategory::Threading:
+        // Thread creation exposes no user-supplied target. Use a fixed sentinel so the grant
+        // persists per plugin: the permission list matches targets by exact string, and the
+        // started function's repr embeds an address that changes every run.
+        targets.emplace_back("thread");
+        return targets;
     default:
         break;
     }
@@ -773,6 +770,7 @@ std::vector<std::string>* permission_list_for(AuditEventCategory category, Plugi
     case AuditEventCategory::Http:          return &permissions.network_http;
     case AuditEventCategory::Socket:        return &permissions.network_socket;
     case AuditEventCategory::ProcessCreate: return &permissions.process;
+    case AuditEventCategory::Threading:     return &permissions.threading;
     default:                                return nullptr;
     }
 }
@@ -808,8 +806,7 @@ bool persist_permission(const std::string&        plugin_key,
 
 int report_denied(PluginAuditManager&            mgr,
                   const std::string&             event_name,
-                  const AuditDecision&           decision,
-                  const std::string&             target = {})
+                  const AuditDecision&           decision)
 {
     AuditViolation violation;
     violation.plugin_key = mgr.current_plugin();
@@ -817,13 +814,7 @@ int report_denied(PluginAuditManager&            mgr,
     violation.reason     = decision.reason;
     mgr.report_violation(violation);
 
-    std::string message = "Plugin attempted audited operation \"" + event_name + "\" without permission";
-    if (!decision.reason.empty())
-        message += ": " + decision.reason;
-    if (!target.empty())
-        message += ": " + target;
-
-    PyErr_SetString(PyExc_PermissionError, message.c_str());
+    PyErr_SetString(PyExc_PermissionError, "Plugin attempted an audited operation without permission");
     return -1;
 }
 
@@ -851,11 +842,74 @@ wxString audit_message(AuditEventCategory category, const wxString& plugin_name,
         return wxString::Format(_L("Plugin \"%s\" is requesting to open a network connection to:\n%s"), plugin_name, target_list);
     case AuditEventCategory::ProcessCreate:
         return wxString::Format(_L("Plugin \"%s\" is requesting to run the following command(s):\n%s"), plugin_name, target_list);
+    case AuditEventCategory::Threading:
+        return wxString::Format(_L("Plugin \"%s\" is requesting permission to create a thread."), plugin_name);
     default:
         return wxString::Format(_L("Plugin \"%s\" is requesting permission for the Python audit event \"%s\"."), plugin_name, event_name);
     }
 }
 
+// Builds and shows the modal permission prompt. Must run on the GUI thread.
+bool prompt_for_targets(AuditEventCategory category, const std::string& plugin_name, const std::string& event_name,
+                        const std::vector<std::string>& unresolved)
+{
+    wxString target_list;
+    for (const auto& target : unresolved)
+        target_list += wxString::FromUTF8(target.c_str()) + "\n";
+
+    wxMessageDialog dialog(nullptr,
+                           audit_message(category, wxString::FromUTF8(plugin_name.c_str()),
+                                        wxString::FromUTF8(event_name.c_str()), target_list),
+                           _L("Plugin permission request"), wxYES_NO | wxICON_WARNING);
+    return dialog.ShowModal() == wxID_YES;
+}
+
+// Records a grant in the plugin's sidecar so it is not asked again. Reads the install state
+// freshly because the async prompt outlives the caller's stack copy of it.
+void persist_grant(const std::string& plugin_key, AuditEventCategory category, const std::vector<std::string>& targets)
+{
+    PluginInstallState state;
+    if (!PluginManager::instance().get_install_state(plugin_key, state))
+        return;
+
+    std::vector<std::string>* permission_list = permission_list_for(category, state.permissions);
+    if (!permission_list)
+        return;
+
+    for (const auto& target : targets)
+        persist_permission(plugin_key, state, *permission_list, target);
+}
+
+// Requests permission for an audited event, returning true when it is already granted or the user
+// approves an inline prompt.
+//
+// An audited event can fire on a thread the UI thread may itself be blocked waiting on: the
+// SlicingPipeline hook runs on the slicing worker thread (see PluginHooks.cpp), and
+// BackgroundSlicingProcess::stop()/stop_internal() park the UI thread until that worker stops.
+// Blocking the worker on a marshaled modal -- which is safe for the plugin-load worker that
+// request_filesystem_read_permissions runs on -- would therefore deadlock the application (the
+// invariant PluginHostUi.cpp documents for slicing-hook UI calls). Off the main thread the prompt
+// is therefore posted asynchronously and the current event denied (fail closed, like an unanswered
+// prompt); the grant is persisted once the user accepts, so a later attempt succeeds without
+// re-prompting.
+bool request_permission(AuditEventCategory category, const std::string& plugin_key, const std::string& plugin_name,
+                        const std::string& event_name, const std::vector<std::string>& unresolved)
+{
+    if (wxTheApp == nullptr || GUI::wxGetApp().is_closing())
+        return false;
+
+    if (wxIsMainThread())
+        return prompt_for_targets(category, plugin_name, event_name, unresolved);
+
+    GUI::wxGetApp().CallAfter([category, plugin_key, plugin_name, event_name, unresolved]() {
+        if (wxTheApp == nullptr || GUI::wxGetApp().is_closing())
+            return;
+        if (prompt_for_targets(category, plugin_name, event_name, unresolved))
+            persist_grant(plugin_key, category, unresolved);
+    });
+    return false;
+}
+
 int decide_audited_event(PluginAuditManager&             mgr,
                          PluginInstallState&              state,
                          const std::string&                plugin_key,
@@ -876,15 +930,7 @@ int decide_audited_event(PluginAuditManager&             mgr,
             return 0;
     }
 
-    wxString target_list;
-    for (const auto& target : unresolved)
-        target_list += wxString::FromUTF8(target.c_str()) + "\n";
-
-    wxMessageDialog dialog(nullptr,
-                           audit_message(category, wxString::FromUTF8(plugin_name.c_str()),
-                                        wxString::FromUTF8(event_name.c_str()), target_list),
-                           _L("Plugin permission request"), wxYES_NO | wxICON_WARNING);
-    if (dialog.ShowModal() != wxID_YES)
+    if (!request_permission(category, plugin_key, plugin_name, event_name, unresolved))
         return report_denied(mgr, event_name, {false, "audit permission required"});
 
     if (permission_list)
@@ -935,7 +981,7 @@ int PluginAuditManager::audit_hook(const char* event, PyObject* args, void* user
     if (fs_category) {
         for (const auto& target : targets) {
             if (mgr->is_denied_path(boost::filesystem::path(target)))
-                return PluginAuditDetail::report_denied(*mgr, event_name, {false, "denied path"}, target);
+                return PluginAuditDetail::report_denied(*mgr, event_name, {false, "denied path"});
         }
     }
 

src/slic3r/plugin/PluginAuditManager.hpp

@@ -4,6 +4,7 @@
 // Via pybind11 so this file requests the same python3xx.lib as everything else.
 #include <boost/filesystem/path.hpp>
 #include <pybind11/conduit/wrap_include_python_h.h>
+#include <memory>
 #include <mutex>
 #include <string>
 #include <unordered_map>
@@ -102,20 +103,22 @@ public:
     bool is_denied_filename(const boost::filesystem::path& candidate) const;
 
     // --- denied-path-keyword registry ---
-    // Keywords that categorically deny a path if ANY component matches one case-insensitively --
-    // e.g. a "secrets" subfolder, a "certificates" folder, a "conf"/"config" directory, or a
-    // .conf/.ini file anywhere the plugin can otherwise reach, including inside an allowed root.
-    // This is broader than the exact-name is_denied_filename registry, but it is not a substring
-    // match: importable modules such as numpy/__config__.py, configparser.py, sysconfig.py, or
-    // user folders such as "Conference" and "Concert" are unrelated names and must stay promptable.
+    // Keywords that categorically deny a path if ANY of its components (directory or file
+    // name), not just the base name, contains one case-insensitively -- e.g. a "secrets"
+    // subfolder, a "certificates" folder, or a "conf"/"config" file anywhere the plugin can
+    // otherwise reach, including inside an allowed root. This is intentionally broader and
+    // fuzzier than the exact-name is_denied_filename registry: it exists to categorically rule
+    // out whole classes of sensitive paths (secrets, certificates, config) rather than name
+    // specific known files, at the cost of over-blocking an unrelated name that happens to
+    // contain the keyword -- the fail-safe direction, same rationale as is_denied_filename.
     void add_denied_path_keyword(const std::string& keyword);
 
     // The list install_hook() seeds into the keyword registry. Exposed so tests seed the exact
     // same set without a live interpreter.
     static std::vector<std::string> default_denied_path_keywords();
 
-    // True when any component of candidate's (canonicalized) path matches a registered keyword,
-    // case-insensitively. A registered "conf" keyword also blocks .conf/.ini file components.
+    // True when any component of candidate's (canonicalized) path contains a registered
+    // keyword, case-insensitively.
     bool is_denied_path_keyword(const boost::filesystem::path& candidate) const;
 
     // is_denied_filename(candidate) || is_denied_path_keyword(candidate). Convenience for

src/slic3r/plugin/PluginFsUtils.cpp

@@ -807,6 +807,7 @@ bool read_install_state(const boost::filesystem::path& plugin_dir, PluginInstall
             read_string_list("network_http", parsed.permissions.network_http);
             read_string_list("network_socket", parsed.permissions.network_socket);
             read_string_list("process", parsed.permissions.process);
+            read_string_list("threading", parsed.permissions.threading);
         }
 
         if (state.contains("enabled") && state["enabled"].is_boolean())
@@ -850,6 +851,7 @@ bool write_install_state(const boost::filesystem::path& plugin_dir, const Plugin
         {"network_http", state.permissions.network_http},
         {"network_socket", state.permissions.network_socket},
         {"process", state.permissions.process},
+        {"threading", state.permissions.threading},
     };
 
     nlohmann::json capabilities = nlohmann::json::array();

src/slic3r/plugin/PluginFsUtils.hpp

@@ -92,6 +92,7 @@ struct PluginPermissions
     std::vector<std::string> network_http;
     std::vector<std::string> network_socket;
     std::vector<std::string> process;
+    std::vector<std::string> threading;
 };
 
 struct PluginInstallState {

tests/libslic3r/test_config.cpp

@@ -538,6 +538,110 @@ SCENARIO("update_diff_values_to_child_config keeps a child's values on variants
     }
 }
 
+SCENARIO("update_non_diff_values_to_base_config keeps a project's changed values on variants it does not list",
+         "[Config][Variant]") {
+    std::set<std::string> no_keys;
+    auto variants = [](std::initializer_list<std::string> names) { return new Slic3r::ConfigOptionStrings(names); };
+
+    GIVEN("A filament base with three variants") {
+        Slic3r::DynamicPrintConfig base;
+        base.set_key_value("filament_extruder_variant",
+            variants({"Direct Drive Standard", "Bowden Standard", "Direct Drive High Flow"}));
+        base.set_deserialize_strict("nozzle_temperature", "220,220,220");
+
+        WHEN("the project was saved when the base had only its first variant") {
+            Slic3r::DynamicPrintConfig project;
+            project.set_key_value("filament_extruder_variant", variants({"Direct Drive Standard"}));
+            project.set_deserialize_strict("nozzle_temperature", "199");
+
+            AND_WHEN("the project lists the value as changed") {
+                project.update_non_diff_values_to_base_config(base, project.keys(), {"nozzle_temperature"}, "", "filament_extruder_variant",
+                                                              Slic3r::filament_options_with_variant, no_keys);
+                THEN("the project's value applies to every variant") {
+                    REQUIRE(project.opt_serialize("nozzle_temperature") == "199,199,199");
+                }
+            }
+            AND_WHEN("the project does not list the value as changed") {
+                project.update_non_diff_values_to_base_config(base, project.keys(), {}, "", "filament_extruder_variant",
+                                                              Slic3r::filament_options_with_variant, no_keys);
+                THEN("the base's values replace it") {
+                    REQUIRE(project.opt_serialize("nozzle_temperature") == "220,220,220");
+                }
+            }
+        }
+        WHEN("the project lists every variant, in another order") {
+            Slic3r::DynamicPrintConfig project;
+            project.set_key_value("filament_extruder_variant",
+                variants({"Bowden Standard", "Direct Drive High Flow", "Direct Drive Standard"}));
+            project.set_deserialize_strict("nozzle_temperature", "190,205,199");
+            project.update_non_diff_values_to_base_config(base, project.keys(), {"nozzle_temperature"}, "", "filament_extruder_variant",
+                                                          Slic3r::filament_options_with_variant, no_keys);
+            THEN("each variant keeps its own value") {
+                REQUIRE(project.opt_serialize("nozzle_temperature") == "199,190,205");
+            }
+        }
+        WHEN("the project lists no variants") {
+            Slic3r::DynamicPrintConfig project;
+            project.set_deserialize_strict("nozzle_temperature", "199");
+            project.update_non_diff_values_to_base_config(base, project.keys(), {"nozzle_temperature"}, "", "filament_extruder_variant",
+                                                          Slic3r::filament_options_with_variant, no_keys);
+            THEN("the project's value applies to every variant") {
+                REQUIRE(project.opt_serialize("nozzle_temperature") == "199,199,199");
+            }
+        }
+    }
+
+    GIVEN("A two-extruder printer base with two variants per extruder") {
+        Slic3r::DynamicPrintConfig base;
+        base.set_key_value("printer_extruder_variant",
+            variants({"Direct Drive Standard", "Direct Drive High Flow", "Direct Drive Standard", "Direct Drive High Flow"}));
+        base.set_key_value("printer_extruder_id", new Slic3r::ConfigOptionInts({1, 1, 2, 2}));
+        base.set_deserialize_strict("retraction_length", "0.8,0.8,0.8,0.8");
+
+        WHEN("the project lists only the Standard variant of each extruder") {
+            Slic3r::DynamicPrintConfig project;
+            project.set_key_value("printer_extruder_variant", variants({"Direct Drive Standard", "Direct Drive Standard"}));
+            project.set_key_value("printer_extruder_id", new Slic3r::ConfigOptionInts({1, 2}));
+            project.set_deserialize_strict("retraction_length", "1.1,2.2");
+            project.update_non_diff_values_to_base_config(base, project.keys(), {"retraction_length"}, "printer_extruder_id", "printer_extruder_variant",
+                                                          Slic3r::printer_options_with_variant_1,
+                                                          Slic3r::printer_options_with_variant_2);
+            THEN("each extruder's High Flow variant takes that extruder's value") {
+                REQUIRE(project.opt_serialize("retraction_length") == "1.1,1.1,2.2,2.2");
+            }
+        }
+        WHEN("the project lists only the Standard variant of each extruder, and the variant lists as changed") {
+            Slic3r::DynamicPrintConfig project;
+            project.set_key_value("printer_extruder_variant", variants({"Direct Drive Standard", "Direct Drive Standard"}));
+            project.set_key_value("printer_extruder_id", new Slic3r::ConfigOptionInts({1, 2}));
+            project.set_deserialize_strict("machine_max_speed_x", "300,100,400,150");
+            base.set_deserialize_strict("machine_max_speed_x", "500,200,500,200,500,200,500,200");
+            project.update_non_diff_values_to_base_config(base, project.keys(),
+                                                          {"machine_max_speed_x", "printer_extruder_id", "printer_extruder_variant"},
+                                                          "printer_extruder_id", "printer_extruder_variant",
+                                                          Slic3r::printer_options_with_variant_1,
+                                                          Slic3r::printer_options_with_variant_2);
+            THEN("the variant lists are the base's") {
+                REQUIRE(project.opt_serialize("printer_extruder_variant") == base.opt_serialize("printer_extruder_variant"));
+                REQUIRE(project.opt_serialize("printer_extruder_id") == "1,1,2,2");
+            }
+            THEN("each extruder's High Flow variant takes that extruder's pair of limits") {
+                REQUIRE(project.opt_serialize("machine_max_speed_x") == "300,100,300,100,400,150,400,150");
+            }
+        }
+        WHEN("the project lists no variants") {
+            Slic3r::DynamicPrintConfig project;
+            project.set_deserialize_strict("retraction_length", "1.1");
+            project.update_non_diff_values_to_base_config(base, project.keys(), {"retraction_length"}, "printer_extruder_id", "printer_extruder_variant",
+                                                          Slic3r::printer_options_with_variant_1,
+                                                          Slic3r::printer_options_with_variant_2);
+            THEN("only the first extruder's variants take the project's value") {
+                REQUIRE(project.opt_serialize("retraction_length") == "1.1,1.1,0.8,0.8");
+            }
+        }
+    }
+}
+
 // SCENARIO("DynamicPrintConfig JSON serialization", "[Config]") {
 //     WHEN("DynamicPrintConfig is serialized and deserialized") {
 // 	auto now = std::chrono::high_resolution_clock::now();

tests/libslic3r/test_config_variant_expansion.cpp

@@ -799,3 +799,30 @@ TEST_CASE("A per-variant filament option read with a single value gives it to ev
     config.load_from_ini_string("pressure_advance = 0.021", ForwardCompatibilitySubstitutionRule::Disable);
     REQUIRE(config.option<ConfigOptionFloats>("pressure_advance")->values == std::vector<double>({0.021, 0.021, 0.021}));
 }
+
+// The device drying options hold several values per filament, as many as each filament preset gives.
+TEST_CASE("The device drying options are rebuilt as each filament's values in slot order", "[Config]")
+{
+    DynamicPrintConfig two_values, one_value, no_value;
+    two_values.option<ConfigOptionStrings>("filament_dev_ams_drying_ams_limitations", true)->values = {"1", "0"};
+    two_values.option<ConfigOptionFloats>("filament_dev_ams_drying_temperature", true)->values     = {45., 45., 55., 55.};
+    one_value.option<ConfigOptionStrings>("filament_dev_ams_drying_ams_limitations", true)->values = {"1"};
+    one_value.option<ConfigOptionFloats>("filament_dev_ams_drying_temperature", true)->values      = {65., 65., 75., 75.};
+
+    // values a project stored for three other filaments
+    DynamicPrintConfig config;
+    config.option<ConfigOptionStrings>("filament_dev_ams_drying_ams_limitations", true)->values = {"0", "0", "0"};
+    config.option<ConfigOptionFloats>("filament_dev_chamber_drying_time", true)->values         = {12., 8., 12.};
+
+    set_filament_dev_options(config, {&two_values, &one_value, &two_values});
+    REQUIRE(config.option<ConfigOptionStrings>("filament_dev_ams_drying_ams_limitations")->values ==
+            std::vector<std::string>({"1", "0", "1", "1", "0"}));
+    REQUIRE(config.option<ConfigOptionFloats>("filament_dev_ams_drying_temperature")->values ==
+            std::vector<double>({45., 45., 55., 55., 65., 65., 75., 75., 45., 45., 55., 55.}));
+    // an option no filament defines keeps the stored values
+    REQUIRE(config.option<ConfigOptionFloats>("filament_dev_chamber_drying_time")->values == std::vector<double>({12., 8., 12.}));
+
+    // a filament without the option takes the option's default
+    set_filament_dev_options(config, {&two_values, &no_value});
+    REQUIRE(config.option<ConfigOptionStrings>("filament_dev_ams_drying_ams_limitations")->values == std::vector<std::string>({"1", "0", ""}));
+}

tests/libslic3r/test_preset_bundle_loading.cpp

@@ -6228,8 +6228,9 @@ TEST_CASE("A per-variant project value maps onto its base preset's variant layou
                                                                    base_finder(&base, calls));
     CHECK(config.option<ConfigOptionStrings>("print_extruder_variant")->values ==
           std::vector<std::string>{"Direct Drive Standard", "Direct Drive High Flow"});
-    // The listed key keeps the project's Standard value and takes High Flow from the base.
-    check_double_vector(config.option<ConfigOptionFloats>("outer_wall_speed")->values, {100., 300.});
+    // The listed key keeps the project's Standard value, and High Flow, which the project does not
+    // list, takes it too, as a user preset's value does.
+    check_double_vector(config.option<ConfigOptionFloats>("outer_wall_speed")->values, {100., 100.});
     check_double_vector(config.option<ConfigOptionFloats>("inner_wall_speed")->values, {250., 350.});
 }
 

tests/slic3rutils/test_network_versions.cpp

@@ -78,31 +78,34 @@ TEST_CASE("Series and managed classification", "[NetworkVersions]")
 
 TEST_CASE_METHOD(PluginFolderFixture, "Managed builds fold into the series; customs are surfaced", "[NetworkVersions]")
 {
-    add_plugin("02.08.01.55");          // managed, same series -> folded into the 02.08.01 row
+    add_plugin("02.08.04.60");          // managed, same series -> folded into the 02.08.04 row
     add_plugin("02.09.00.10");          // managed, unknown series -> not listed
+    add_plugin("02.08.01.55");          // managed, series this build no longer has an ABI for -> not listed
     add_plugin("02.03.00.62");          // managed, older whitelisted series -> folded into 02.03.00
     add_plugin("02.01.01.52");          // managed, series with no ABI in this build -> not listed
-    add_plugin("02.08.01_custom");      // custom, whitelisted series -> listed under it
-    add_plugin("02.08.01.52-dev");      // custom (dash-suffixed), whitelisted series -> listed
+    add_plugin("02.08.04_custom");      // custom, whitelisted series -> listed under it
+    add_plugin("02.08.04.52-dev");      // custom (dash-suffixed), whitelisted series -> listed
 
     auto versions = get_all_available_versions();
 
     // The specific managed build never gets its own row - the series represents it.
-    REQUIRE(count_version(versions, "02.08.01.55") == 0);
-    REQUIRE(count_version(versions, "02.08.01")    == 1);
+    REQUIRE(count_version(versions, "02.08.04.60") == 0);
+    REQUIRE(count_version(versions, "02.08.04")    == 1);
     REQUIRE(count_version(versions, "02.09.00.10") == 0);
+    REQUIRE(count_version(versions, "02.08.01.55") == 0);
+    REQUIRE(count_version(versions, "02.08.01")    == 0);
     REQUIRE(count_version(versions, "02.03.00.62") == 0);
     REQUIRE(count_version(versions, "02.03.00")    == 1);
     REQUIRE(count_version(versions, "02.01.01.52") == 0);
     // Custom-named builds are distinct files kept under their own name.
-    REQUIRE(count_version(versions, "02.08.01_custom")  == 1);
-    REQUIRE(count_version(versions, "02.08.01.52-dev")  == 1);
+    REQUIRE(count_version(versions, "02.08.04_custom")  == 1);
+    REQUIRE(count_version(versions, "02.08.04.52-dev")  == 1);
 
     // Newest series first, its customs nested under it (suffix sort: "" < ".52-dev" < "_custom"),
     // then older series, legacy last.
-    REQUIRE(versions[0].version == "02.08.01");
-    REQUIRE(versions[1].version == "02.08.01.52-dev");
-    REQUIRE(versions[2].version == "02.08.01_custom");
+    REQUIRE(versions[0].version == "02.08.04");
+    REQUIRE(versions[1].version == "02.08.04.52-dev");
+    REQUIRE(versions[2].version == "02.08.04_custom");
     REQUIRE(versions[3].version == "02.03.00");
     REQUIRE(versions.back().version == BAMBU_NETWORK_AGENT_VERSION_LEGACY);
 
@@ -111,9 +114,9 @@ TEST_CASE_METHOD(PluginFolderFixture, "Managed builds fold into the series; cust
     REQUIRE_FALSE(versions[3].is_latest);
 
     // Customs sort/render nested under their series (non-empty suffix, base = the series).
-    REQUIRE(versions[1].base_version == "02.08.01");
+    REQUIRE(versions[1].base_version == "02.08.04");
     REQUIRE_FALSE(versions[1].suffix.empty());
-    REQUIRE(versions[2].base_version == "02.08.01");
+    REQUIRE(versions[2].base_version == "02.08.04");
     REQUIRE_FALSE(versions[2].suffix.empty());
 
     // "(Latest)" is the series row, never a nested custom build.
@@ -123,20 +126,20 @@ TEST_CASE_METHOD(PluginFolderFixture, "Managed builds fold into the series; cust
     REQUIRE_FALSE(versions[2].is_latest);
 
     // The stored default that drives download and update-check decisions is now the series.
-    REQUIRE(std::string(get_latest_network_version()) == "02.08.01");
+    REQUIRE(std::string(get_latest_network_version()) == "02.08.04");
 }
 
 TEST_CASE_METHOD(PluginFolderFixture, "Only the loaded series is marked installed", "[NetworkVersions]")
 {
-    add_plugin("02.08.01.55");
-    add_plugin("02.08.01_custom");
+    add_plugin("02.08.04.60");
+    add_plugin("02.08.04_custom");
 
-    // The loaded plug-in reports its full build (02.08.01.55); the series row is what gets marked.
+    // The loaded plug-in reports its full build (02.08.04.60); the series row is what gets marked.
     {
-        auto versions = get_all_available_versions("02.08.01.55");
+        auto versions = get_all_available_versions("02.08.04.60");
         int marked = 0;
         for (const auto& info : versions)
-            if (info.is_loaded) { ++marked; REQUIRE(info.version == "02.08.01"); }
+            if (info.is_loaded) { ++marked; REQUIRE(info.version == "02.08.04"); }
         REQUIRE(marked == 1);
     }
 
@@ -152,10 +155,10 @@ TEST_CASE_METHOD(PluginFolderFixture, "Only the loaded series is marked installe
 
     // A loaded custom build matches its own row, never the bare series.
     {
-        auto versions = get_all_available_versions("02.08.01_custom");
+        auto versions = get_all_available_versions("02.08.04_custom");
         int marked = 0;
         for (const auto& info : versions)
-            if (info.is_loaded) { ++marked; REQUIRE(info.version == "02.08.01_custom"); }
+            if (info.is_loaded) { ++marked; REQUIRE(info.version == "02.08.04_custom"); }
         REQUIRE(marked == 1);
     }
 
@@ -167,11 +170,11 @@ TEST_CASE_METHOD(PluginFolderFixture, "Only the loaded series is marked installe
 TEST_CASE("Only whitelisted series pass the load gate", "[NetworkVersions]")
 {
     // Each whitelisted series, its builds, and custom-named builds of that series.
-    REQUIRE(is_supported_network_version("02.08.01"));
-    REQUIRE(is_supported_network_version("02.08.01.52"));
-    REQUIRE(is_supported_network_version("02.08.01.55"));
-    REQUIRE(is_supported_network_version("02.08.01_custom"));
-    REQUIRE(is_supported_network_version("02.08.01.52-dev"));
+    REQUIRE(is_supported_network_version("02.08.04"));
+    REQUIRE(is_supported_network_version("02.08.04.52"));
+    REQUIRE(is_supported_network_version("02.08.04.60"));
+    REQUIRE(is_supported_network_version("02.08.04_custom"));
+    REQUIRE(is_supported_network_version("02.08.04.52-dev"));
     REQUIRE(is_supported_network_version("02.03.00"));
     REQUIRE(is_supported_network_version("02.03.00.62"));
     REQUIRE(is_supported_network_version("02.03.00.70"));
@@ -179,6 +182,9 @@ TEST_CASE("Only whitelisted series pass the load gate", "[NetworkVersions]")
     REQUIRE(is_supported_network_version(BAMBU_NETWORK_AGENT_VERSION_LEGACY));
 
     // Series whitelisted by previous Orca releases that no generation here can call.
+    REQUIRE_FALSE(is_supported_network_version("02.08.01"));
+    REQUIRE_FALSE(is_supported_network_version("02.08.01.55"));
+    REQUIRE_FALSE(is_supported_network_version("02.08.01_custom"));
     REQUIRE_FALSE(is_supported_network_version("02.01.01.52"));
     REQUIRE_FALSE(is_supported_network_version("02.00.02.50"));
 
@@ -198,9 +204,9 @@ TEST_CASE("Each version resolves to the ABI generation that can call it", "[Netw
 {
     // The generation is keyed on the series, so every build of a series - including the
     // custom-named ones - resolves to the same one.
-    CHECK(network_plugin_abi("02.08.01")        == NetworkAbi::Current);
-    CHECK(network_plugin_abi("02.08.01.55")     == NetworkAbi::Current);
-    CHECK(network_plugin_abi("02.08.01.52-dev") == NetworkAbi::Current);
+    CHECK(network_plugin_abi("02.08.04")        == NetworkAbi::Current);
+    CHECK(network_plugin_abi("02.08.04.60")     == NetworkAbi::Current);
+    CHECK(network_plugin_abi("02.08.04.52-dev") == NetworkAbi::Current);
     CHECK(network_plugin_abi("02.03.00")        == NetworkAbi::V0203);
     CHECK(network_plugin_abi("02.03.00.62")     == NetworkAbi::V0203);
     CHECK(network_plugin_abi("02.03.00_custom") == NetworkAbi::V0203);
@@ -208,6 +214,7 @@ TEST_CASE("Each version resolves to the ABI generation that can call it", "[Netw
 
     // Anything the load gate rejects must dispatch through nothing at all, rather than
     // defaulting to a layout it does not share.
+    CHECK(network_plugin_abi("02.08.01.55") == NetworkAbi::Unsupported);
     CHECK(network_plugin_abi("02.01.01.52") == NetworkAbi::Unsupported);
     CHECK(network_plugin_abi("02.00.02.50") == NetworkAbi::Unsupported);
     CHECK(network_plugin_abi("02.09.00.10") == NetworkAbi::Unsupported);
@@ -234,7 +241,7 @@ TEST_CASE_METHOD(PluginFolderFixture, "Legacy series never adopts discovered bui
     // With nothing else on disk, the series holds "(Latest)" even though its library is
     // not installed.
     for (const auto& info : versions) {
-        if (info.version == "02.08.01") {
+        if (info.version == "02.08.04") {
             REQUIRE(info.is_latest);
             REQUIRE_FALSE(info.is_loaded);
         }

tests/slic3rutils/test_plugin_audit.cpp

@@ -222,19 +222,18 @@ TEST_CASE("Plugin audit denies secret/certificate/config-like paths by keyword",
         CHECK(mgr.is_denied_path_keyword(fs::path("/resources/certificates/ca.pem")));
     }
 
-    SECTION("a 'conf'/'config' directory or config file component is denied")
+    SECTION("a 'conf'/'config' directory or file component is denied")
     {
         CHECK(mgr.is_denied_path_keyword(fs::path("/plugin/conf/settings.json")));
         CHECK(mgr.is_denied_path_keyword(fs::path("/plugin/config/settings.json")));
         CHECK(mgr.is_denied_path_keyword(fs::path("/plugin/plugin.conf")));
-        CHECK(mgr.is_denied_path_keyword(fs::path("/plugin/plugin.ini")));
     }
 
     SECTION("matching is case-insensitive")
     {
         CHECK(mgr.is_denied_path_keyword(fs::path("/plugin/SECRETS/token.txt")));
-        CHECK(mgr.is_denied_path_keyword(fs::path("/resources/Certificates/ca.pem")));
-        CHECK(mgr.is_denied_path_keyword(fs::path("/plugin/PLUGIN.CONF")));
+        CHECK(mgr.is_denied_path_keyword(fs::path("/resources/CertBundle/ca.pem")));
+        CHECK(mgr.is_denied_path_keyword(fs::path("/plugin/CONFIG.JSON")));
     }
 
     SECTION("matching is not limited to the base name -- any ancestor component counts")
@@ -246,14 +245,6 @@ TEST_CASE("Plugin audit denies secret/certificate/config-like paths by keyword",
     {
         CHECK_FALSE(mgr.is_denied_path_keyword(fs::path("/plugin/output/model.gcode")));
         CHECK_FALSE(mgr.is_denied_path_keyword(fs::path("/plugin/storage/state.json")));
-        CHECK_FALSE(mgr.is_denied_path_keyword(fs::path("/python/packages/cp312/numpy/__config__.py")));
-        CHECK_FALSE(mgr.is_denied_path_keyword(fs::path("/python/packages/cp312/numpy/_core/_ufunc_config.py")));
-        CHECK_FALSE(mgr.is_denied_path_keyword(fs::path("/python/Lib/configparser.py")));
-        CHECK_FALSE(mgr.is_denied_path_keyword(fs::path("/python/Lib/sysconfig.py")));
-        CHECK_FALSE(mgr.is_denied_path_keyword(fs::path("/python/Lib/logging/config.py")));
-        CHECK_FALSE(mgr.is_denied_path_keyword(fs::path("/python/packages/cp312/certifi/cacert.pem")));
-        CHECK_FALSE(mgr.is_denied_path_keyword(fs::path("/users/Conference/output.txt")));
-        CHECK_FALSE(mgr.is_denied_path_keyword(fs::path("/users/Concert/output.txt")));
     }
 
     SECTION("an empty path is not denied")

tests/slic3rutils/test_plugin_install.cpp

@@ -122,6 +122,7 @@ TEST_CASE("install-state sidecar is the source of truth for a cloud plugin's ins
     state.permissions.network_http  = {"https://api.example.com"};
     state.permissions.network_socket = {"192.168.45.6:443"};
     state.permissions.process        = {"/usr/bin/curl"};
+    state.permissions.threading      = {"thread"};
     REQUIRE(write_install_state(plugin_dir, state));
 
     // Permission data is persisted in the same sidecar as the installation metadata.
@@ -132,6 +133,7 @@ TEST_CASE("install-state sidecar is the source of truth for a cloud plugin's ins
     CHECK(persisted.permissions.network_http == state.permissions.network_http);
     CHECK(persisted.permissions.network_socket == state.permissions.network_socket);
     CHECK(persisted.permissions.process == state.permissions.process);
+    CHECK(persisted.permissions.threading == state.permissions.threading);
 
     // Reading the sidecar back onto a freshly-scanned descriptor (whose header version is still
     // 1.0.0) must surface the cloud-installed 1.2.0. This is what lets update_cloud_metadata compare