Treat an image with no colour spread as flat, not as a ramp

The axis-coverage signal defaulted to 1, meaning "spans its range", which is
what a ramp measures. An image of a single colour has no axis to measure, so it
kept that default and stopped counting as flat - the most flat image there is.
It broke the slic3rutils test that feeds mix_targets() a uniform 8x8.

Zero is the right default: an unmeasurable axis leaves the flat-share test
deciding on its own, exactly as before this signal existed. That also covers an
image with too few pixels to fit an axis through.

.claude/skills/orca-translations/SKILL.md

@@ -1,6 +1,6 @@
 ---
 name: orca-translations
-description: Use when updating, filling, reviewing or fixing OrcaSlicer translations in localization/i18n — running scripts/run_gettext --full, translating empty or new msgids in the .po catalogs, AI translation passes and their "# AI Translated" / "# Needs human review" comments, plural forms, msgctxt homonyms, and keeping catalogs consistent with the localization glossary (OrcaSlicer_WIKI developer_reference/glossary), including adding new glossary terms. Also use for msgfmt or run_gettext failures, placeholder or line-break mismatches, and reviewing a translation PR against the glossary.
+description: Use when updating, filling, reviewing or fixing OrcaSlicer translations in localization/i18n — running scripts/run_gettext --full, translating empty or new msgids in the .po catalogs, AI translation passes and their "# AI Translated" / "# Needs human review" comments, plural forms, msgctxt homonyms, and keeping catalogs consistent with the localization glossary (OrcaSlicer_WIKI localization_glossary.tsv), including adding new glossary terms. Also use for msgfmt or run_gettext failures, placeholder or line-break mismatches, and reviewing a translation PR against the glossary.
 ---
 
 # OrcaSlicer translations
@@ -9,7 +9,7 @@ The UI strings live in gettext catalogs: `localization/i18n/OrcaSlicer.pot` is t
 `localization/i18n/<lang>/OrcaSlicer_<lang>.po` holds each language. The `en` catalog is empty on
 purpose, so skip it. Recurring terms are fixed by the
 [localization glossary](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/developer_reference/localization_glossary.md),
-whose source is the per-language files in `developer_reference/glossary/` (`terms.tsv`, `languages.txt` and one `<lang>.tsv`) in the **OrcaSlicer_WIKI** repository.
+whose source is `developer_reference/localization_glossary.tsv` in the **OrcaSlicer_WIKI** repository.
 A translation pass therefore touches two repositories: the catalogs here, and the glossary there.
 
 All catalog editing goes through [`scripts/po_tool.py`](scripts/po_tool.py) (standard library only).
@@ -153,7 +153,7 @@ Report:
 - anything left empty, and why;
 - the glossary rows added or filled.
 
-The catalogs (and `OrcaSlicer.pot`) and the glossary (`developer_reference/glossary/*.tsv` and `localization_glossary.md`) are
+The catalogs (and `OrcaSlicer.pot`) and the glossary (`localization_glossary.tsv` and `.md`) are
 separate changes in separate repositories. The wiki change should land with, or before, the catalog
 change. Commit or open PRs only when asked.
 
@@ -210,7 +210,7 @@ with the translators, followed by the catalogs.
 When this skill and the checkouts disagree, the checkouts win:
 - `scripts/run_gettext.sh` / `.bat` for extraction and merging;
 - `localization/i18n/list.txt` for the scanned sources;
-- the wiki's `localization_guide.md` and `localization_glossary.md` and `glossary/*.tsv` for the rules and terms;
+- the wiki's `localization_guide.md` and `localization_glossary.md` / `.tsv` for the rules and terms;
 - `AGENTS.md` (Localization & translations) for the repository's conventions.
 
 ## Editing this skill

.claude/skills/orca-translations/scripts/po_tool.py

@@ -28,14 +28,13 @@ import sys
 import tempfile
 import time
 import unicodedata
-import urllib.error
 import urllib.request
 from pathlib import Path
 
 REPO = Path(__file__).resolve().parents[4]
 I18N = REPO / "localization" / "i18n"
 SKIP_LANGS = {"en"}  # the English catalog is intentionally empty
-GLOSSARY_DIR = Path("developer_reference") / "glossary"  # terms.tsv, languages.txt and one <lang>.tsv per language
+GLOSSARY_TSV = Path("developer_reference") / "localization_glossary.tsv"
 GLOSSARY_MD = Path("developer_reference") / "localization_glossary.md"
 MISSING = {"", "—"}
 RAW_URL = "https://raw.githubusercontent.com/OrcaSlicer/OrcaSlicer_WIKI/main/"
@@ -253,40 +252,30 @@ def all_langs():
 
 def find_wiki(arg):
     for cand in [arg, os.environ.get("ORCA_WIKI_DIR"), REPO.parent / "OrcaSlicer_WIKI", REPO.parent / "OrcaSlicer.wiki"]:
-        if cand and (Path(cand) / GLOSSARY_DIR / "terms.tsv").exists():
+        if cand and (Path(cand) / GLOSSARY_TSV).exists():
             return Path(cand)
     return None
 
 
-def _download(rel, required=True):
-    cache = Path(tempfile.gettempdir()) / "orca_glossary" / rel
+def _download(rel):
+    cache = Path(tempfile.gettempdir()) / ("orca_glossary_" + rel.name)
     if not cache.exists() or time.time() - cache.stat().st_mtime > 3600:
-        try:
-            with urllib.request.urlopen(RAW_URL + rel.as_posix(), timeout=30) as r:
-                data = r.read()
-        except urllib.error.HTTPError:
-            if required:
-                raise
-            return None
-        cache.parent.mkdir(parents=True, exist_ok=True)
-        cache.write_bytes(data)
+        with urllib.request.urlopen(RAW_URL + rel.as_posix(), timeout=30) as r:
+            cache.write_bytes(r.read())
     return cache
 
 
 class Glossary:
-    """The glossary: rows of [English, Description, <one translation per language loaded>]."""
-
-    def __init__(self, wiki_arg=None, quiet=False, langs=None):
+    def __init__(self, wiki_arg=None, quiet=False):
         self.wiki = find_wiki(wiki_arg)
-        self.langs = langs  # only these languages' files are read (and downloaded); None means all
         if self.wiki:
-            self.dir, self.md = self.wiki / GLOSSARY_DIR, self.wiki / GLOSSARY_MD
+            self.tsv, self.md = self.wiki / GLOSSARY_TSV, self.wiki / GLOSSARY_MD
             if not quiet:
                 self.report_clone_state()
         else:
             if not quiet:
                 print("note: no OrcaSlicer_WIKI clone found; using the published glossary read-only", file=sys.stderr)
-            self.dir, self.md = _download(GLOSSARY_DIR / "terms.tsv").parent, _download(GLOSSARY_MD)
+            self.tsv, self.md = _download(GLOSSARY_TSV), _download(GLOSSARY_MD)
         self.load()
 
     def report_clone_state(self):
@@ -301,23 +290,11 @@ class Glossary:
         if behind and behind != "0":
             print(f"note: the wiki clone is {behind} commits behind origin/main (as of its last fetch)", file=sys.stderr)
 
-    def _read(self, name, required=True):
-        path = self.dir / name if self.wiki else _download(GLOSSARY_DIR / name, required)
-        return path.read_text(encoding="utf-8-sig").splitlines() if path and path.exists() else None
-
     def load(self):
-        terms = [l.split("	") for l in self._read("terms.tsv")[1:] if l.strip()]
-        langs = [l.strip() for l in self._read("languages.txt") if l.strip()]
-        langs = [l for l in langs if self.langs is None or l in self.langs]
-        self.header = ["English", "Description"] + langs
-        self.rows = [[r[0], r[1] if len(r) > 1 else ""] + [""] * len(langs) for r in terms]
-        index = {r[0]: r for r in self.rows}
-        for col, lang in enumerate(langs, start=2):
-            for line in (self._read(f"{lang}.tsv", required=False) or [])[1:]:
-                cells = line.split("	")
-                # "—" marks a language with no established rendering yet
-                if len(cells) > 2 and cells[0] in index and cells[2].strip() not in MISSING:
-                    index[cells[0]][col] = cells[2].strip()
+        rows = [l.split("\t") for l in self.tsv.read_text(encoding="utf-8-sig").splitlines() if l.strip()]
+        self.header = rows[0]
+        # "—" marks a language with no established rendering yet
+        self.rows = [[c if c.strip() not in MISSING else "" for c in r] + [""] * (len(rows[0]) - len(r)) for r in rows[1:]]
         self.matchers = []
         for row in self.rows:
             base = re.sub(r"\s*\([^)]*\)\s*$", "", row[0]).strip()
@@ -517,7 +494,7 @@ def similar_entries(c, e, pool, cutoff=0.72):
 
 def cmd_pending(a):
     c = Catalog(catalog_path(a.lang))
-    g = Glossary(a.wiki, langs=[a.lang])
+    g = Glossary(a.wiki)
     todo = [e for e in c.active() if needs_translation(e, c.nplurals, a.include_fuzzy)]
     batch = todo[a.offset:a.offset + a.limit] if a.limit else todo[a.offset:]
     pool = [(x.msgid, x.msgstrs()[0], x.obsolete) for x in c.entries
@@ -556,7 +533,7 @@ def cmd_pending(a):
 
 def cmd_apply(a):
     c = Catalog(catalog_path(a.lang))
-    g = None if a.no_glossary else Glossary(a.wiki, quiet=True, langs=[a.lang])
+    g = None if a.no_glossary else Glossary(a.wiki, quiet=True)
     data = json.loads(Path(a.input).read_text(encoding="utf-8"))
     items = data["entries"] if isinstance(data, dict) else data
     idx = c.index()
@@ -611,7 +588,7 @@ def find_msgfmt():
 
 
 def cmd_check(a):
-    g = None if a.no_glossary else Glossary(a.wiki, quiet=True, langs=a.lang or None)
+    g = None if a.no_glossary else Glossary(a.wiki, quiet=True)
     msgfmt = find_msgfmt()
     status = 0
     for lang in a.lang or all_langs():
@@ -669,7 +646,7 @@ def cmd_lookup(a):
 
 
 def cmd_glossary(a):
-    g = Glossary(a.wiki, langs=[a.lang])
+    g = Glossary(a.wiki)
     col = g.column(a.lang)
     if col is None:
         print(f"'{a.lang}' has no glossary column yet; add one with glossary-set --set {a.lang}=...")
@@ -756,17 +733,6 @@ def cmd_candidates(a):
         print(f"{cnt:7} {langs:6}  {text}{'  [label]' if k in labels else ''}  e.g. {ex[:70]}{'…' if len(ex) > 70 else ''}")
 
 
-def _edit_tsv(path, edit):
-    """Apply edit(lines) to a glossary TSV, keeping its BOM and line endings."""
-    data = path.read_bytes()
-    bom = data.startswith(b"\xef\xbb\xbf")
-    text = data.decode("utf-8-sig")
-    nl = "\r\n" if "\r\n" in text else "\n"
-    lines = text.splitlines()
-    edit(lines)
-    path.write_bytes((b"\xef\xbb\xbf" if bom else b"") + (nl.join(lines) + nl).encode("utf-8"))
-
-
 def cmd_glossary_set(a):
     wiki = find_wiki(a.wiki)
     if not wiki:
@@ -775,21 +741,8 @@ def cmd_glossary_set(a):
               f"  {a.term}: " + ", ".join(a.set) + "\n"
               "Clone https://github.com/OrcaSlicer/OrcaSlicer_WIKI next to this repository, or pass --wiki.", file=sys.stderr)
         return 2
-    gdir = wiki / GLOSSARY_DIR
-    gen = wiki / "generate_glossary.py"
-    if not gen.exists():
-        sys.exit(f"{gen} not found")
-    run_gen = lambda *args: subprocess.run([sys.executable, str(gen), *args], cwd=wiki, capture_output=True, text=True)
-    langs = [l.strip() for l in (gdir / "languages.txt").read_text(encoding="utf-8-sig").splitlines() if l.strip()]
-    values = {}
-    for s in a.set:
-        lang, _, val = s.partition("=")
-        if lang not in langs:
-            sys.exit(f"no glossary language '{lang}' (add it to {GLOSSARY_DIR.as_posix()}/languages.txt)")
-        if "\t" in val or "\n" in val:
-            sys.exit("values cannot contain tabs or line breaks")
-        values[lang] = val.strip()
-    lock = gdir / ".lock"
+    tsv = wiki / GLOSSARY_TSV
+    lock = tsv.with_suffix(".lock")
     for _ in range(100):
         try:
             fd = os.open(lock, os.O_CREAT | os.O_EXCL)
@@ -799,51 +752,50 @@ def cmd_glossary_set(a):
     else:
         sys.exit(f"could not lock {lock}; remove it if no other run is active")
     try:
-        terms = (gdir / "terms.tsv").read_text(encoding="utf-8-sig").splitlines()
-        new = not any(l.split("\t")[0] == a.term for l in terms[1:])
-        if new and not a.description:
-            sys.exit("a new term needs --description (one sentence saying what it is)")
-        # an established translation is only replaced on request
-        conflicts = []
-        for lang, v in values.items():
-            for line in (gdir / f"{lang}.tsv").read_text(encoding="utf-8-sig").splitlines()[1:]:
-                cells = line.split("\t")
-                if cells[0] == a.term and len(cells) > 2 and cells[2].strip() not in MISSING and cells[2] != v:
-                    conflicts.append(f"{lang}: '{cells[2]}' -> '{v}'")
+        data = tsv.read_bytes()
+        bom = data.startswith(b"\xef\xbb\xbf")
+        text = data.decode("utf-8-sig")
+        nl = "\r\n" if "\r\n" in text else "\n"
+        lines = text.splitlines()
+        header = lines[0].split("\t")
+        values = {}
+        for s in a.set:
+            lang, _, val = s.partition("=")
+            if lang not in header:
+                sys.exit(f"no glossary column '{lang}'")
+            if "\t" in val or "\n" in val:
+                sys.exit("values cannot contain tabs or line breaks")
+            values[header.index(lang)] = val.strip()
+        row_i = next((i for i, l in enumerate(lines[1:], 1) if l.split("\t")[0] == a.term), None)
+        new = row_i is None
+        if new:
+            if not a.description:
+                sys.exit("a new term needs --description (one sentence saying what it is)")
+            row = [a.term, a.description] + [""] * (len(header) - 2)
+            lines.append("")
+            row_i = len(lines) - 1
+        else:
+            row = lines[row_i].split("\t")
+            row += [""] * (len(header) - len(row))
+            if a.description:
+                row[1] = a.description
+        conflicts = [f"{header[i]}: '{row[i]}' -> '{v}'" for i, v in values.items() if row[i].strip() not in MISSING and row[i] != v]
         if conflicts and not a.replace:
             sys.exit("established translations differ (pass --replace, and update the catalogs to match):\n  " + "\n  ".join(conflicts))
-
-        def edit_terms(lines):
-            for i, l in enumerate(lines):
-                if i and l.split("\t")[0] == a.term:
-                    if a.description:
-                        lines[i] = f"{a.term}\t{a.description}"
-                    return
-            lines.append(f"{a.term}\t{a.description}")
-        if new or a.description:
-            _edit_tsv(gdir / "terms.tsv", edit_terms)
-            r = run_gen("--sync")  # copies the term and description into every language file
-            if r.returncode:
-                sys.exit((r.stdout + r.stderr).strip())
-
-        def setter(lang, v):
-            def edit(lines):
-                for i, l in enumerate(lines):
-                    cells = l.split("\t")
-                    if i and cells[0] == a.term:
-                        lines[i] = "\t".join(cells[:2] + [v])
-                        return
-                sys.exit(f"{lang}.tsv has no row for '{a.term}'")
-            return edit
-        for lang, v in values.items():
-            _edit_tsv(gdir / f"{lang}.tsv", setter(lang, v))
+        for i, v in values.items():
+            row[i] = v
+        lines[row_i] = "\t".join(row)
+        tsv.write_bytes((b"\xef\xbb\xbf" if bom else b"") + (nl.join(lines) + nl).encode("utf-8"))
     finally:
         os.close(fd)
         os.unlink(lock)
     print(f"glossary: {'added' if new else 'updated'} '{a.term}'")
-    r = run_gen("--update")
-    print((r.stdout + r.stderr).strip())
-    return r.returncode
+    gen = wiki / "generate_glossary.py"
+    if gen.exists():
+        r = subprocess.run([sys.executable, str(gen), "--update"], cwd=wiki, capture_output=True, text=True)
+        print((r.stdout + r.stderr).strip())
+        return r.returncode
+    return 0
 
 
 def main():

.claude/skills/orca-wxwidgets/references/platforms.md

@@ -569,19 +569,12 @@ on the **first** call. So:
 #endif
 ```
 
-**Before GTK starts**, only the environment exists. `CLI::run` (`src/OrcaSlicer.cpp`) sets the NVIDIA
-DMABUF workaround and then branches on `GDK_BACKEND` (an `x11` prefix means the X11 opt-in). On both
-paths, when `/proc/driver/nvidia/version` exists and the linked WebKitGTK honours the switch (>= 2.44,
-`WebView::SupportsForceSharedMemory()`), it sets `WEBKIT_DMABUF_RENDERER_FORCE_SHM=1` and
-`WEBKIT_FORCE_DMABUF_RENDERER=1` (non-replacing): the proprietary driver cannot back WebKit's hardware
-DMABUF renderer. On a hypervisor guest (`/proc/cpuinfo` `hypervisor` flag) and WebKitGTK >= 2.44 it sets
-`WEBKIT_DMABUF_RENDERER_FORCE_SHM=1` alone, since virtual GPUs cannot back the hardware path either. On the default path it forces `GDK_BACKEND=x11` when wx lacks EGL and `WAYLAND_DISPLAY`
-is set, and sets `WEBKIT_DISABLE_COMPOSITING_MODE=1` (non-replacing) inside that branch when the linked
-WebKitGTK is older than 2.42: a forced X11 backend in a Wayland session is the only default-path case
-that runs through XWayland, which `DISPLAY` and `WAYLAND_DISPLAY` alone do not tell you (a native
-Wayland app inherits both). It calls `XInitThreads()`
+**Before GTK starts**, only the environment exists. `CLI::run` (`src/OrcaSlicer.cpp`) branches on
+`GDK_BACKEND` (an `x11` prefix means the X11 opt-in). On the default path it forces `GDK_BACKEND=x11`
+when wx lacks EGL and `WAYLAND_DISPLAY` is set. It sets `WEBKIT_DISABLE_COMPOSITING_MODE=1`
+(non-replacing) only when both `DISPLAY` and `WAYLAND_DISPLAY` are set, and calls `XInitThreads()`
 only when `DISPLAY` is set. With neither variable set, the GUI refuses to start ("Neither DISPLAY nor
-WAYLAND_DISPLAY set"). The details and the WebKit rules (c12912e0df) are in
+WAYLAND_DISPLAY set"). The details and the WebKit rule (c12912e0df) are in
 `references/webview-gl-aui-media.md` §WebKitGTK on Linux sessions.
 
 **wx's own detectors**, for reference:

.claude/skills/orca-wxwidgets/references/webview-gl-aui-media.md

@@ -61,8 +61,7 @@ available; GTK2/WebKit1 is an opt-out configuration the GUI does not support.
 11. A web host that re-themes in place handles `EVT_WEBVIEW_RECREATED` without `Skip()`; one that
     needs a reload lets it through. §[Orca wrapper](#orca-webview-wrapper-widgetswebview)
 12. Keep `WebViewWebKit`'s destructor removing the `"wx"` handler. §[Orca wrapper](#orca-webview-wrapper-widgetswebview)
-13. Do not widen `WEBKIT_DISABLE_COMPOSITING_MODE` beyond the no-EGL default path where Orca forces
-    `GDK_BACKEND=x11`, for WebKitGTK older than 2.42, and never
+13. Do not widen `WEBKIT_DISABLE_COMPOSITING_MODE` beyond Orca's default-path XWayland case, and never
     make a page's progress depend only on a C++→JS callback. §[WebKitGTK on Linux](#webkitgtk-on-linux-sessions)
 14. GL attribute lists: legacy `int[]` lists end with `0` and spell out `WX_GL_RGBA` and
     `WX_GL_DOUBLEBUFFER`; `wxGLAttributes`/`wxGLContextAttrs` end with `EndList()`; MSAA is requested
@@ -568,74 +567,33 @@ vue-resize workaround script and sets a persistent SQLite cookie store on the vi
 ## WebKitGTK on Linux sessions
 
 **Mechanism.** `CLI::run` (`src/OrcaSlicer.cpp`, under `#ifdef __WXGTK__`, before GTK initialises)
-sets the DMABUF workarounds and then branches on `GDK_BACKEND`:
-- **Both paths**, before the split: when `/proc/driver/nvidia/version` exists and the linked WebKitGTK
-  honours the switch (>= 2.44, `WebView::SupportsForceSharedMemory()`), it sets
-  `WEBKIT_DMABUF_RENDERER_FORCE_SHM=1` and `WEBKIT_FORCE_DMABUF_RENDERER=1` non-replacing. The
-  proprietary driver cannot back WebKit's hardware DMABUF renderer, so the shared-memory transport keeps
-  accelerated compositing instead of dropping it; `WEBKIT_FORCE_DMABUF_RENDERER` clears the
-  Debian/Ubuntu/openSUSE `isNVIDIA()` early return, which otherwise returns before the FORCE_SHM check.
-- **Hypervisor guests**, same position: when `is_hypervisor_guest()` (the `hypervisor` flag in
-  `/proc/cpuinfo`) and WebKitGTK >= 2.44, it sets `WEBKIT_DMABUF_RENDERER_FORCE_SHM=1` non-replacing.
-  Virtual GPUs (VirtualBox VMSVGA, VMware, QEMU) cannot back the hardware DMABUF path either, and
-  FORCE_SHM alone was confirmed to fix web views in VirtualBox; the `WEBKIT_FORCE_DMABUF_RENDERER` pair
-  is not needed without the Debian `isNVIDIA()` patch. The flag is x86-only, so ARM guests are not covered.
+branches on `GDK_BACKEND`:
 - **Default path** (`GDK_BACKEND` unset or not starting with `x11`): if wx lacks EGL (`!wxHAS_EGL`) and
-  `WAYLAND_DISPLAY` is set, it forces `GDK_BACKEND=x11`, and in that same branch it sets
-  `WEBKIT_DISABLE_COMPOSITING_MODE=1` non-replacing when the linked WebKitGTK predates 2.42
-  (`WebView::NeedsCompositingWorkaround()`). That forced X11 backend in a Wayland session is the only
-  default-path case that really runs through XWayland; `DISPLAY` and `WAYLAND_DISPLAY` alone do not
-  identify it, because a native Wayland app inherits both. `XInitThreads()` runs only when `DISPLAY` is
-  set.
+  `WAYLAND_DISPLAY` is set, it forces `GDK_BACKEND=x11`; it sets `WEBKIT_DISABLE_COMPOSITING_MODE=1`
+  non-replacing **only** when both `DISPLAY` and `WAYLAND_DISPLAY` are non-empty (a Wayland session with
+  XWayland available — the session, not the backend GTK will pick); `XInitThreads()` runs only when
+  `DISPLAY` is set.
 - **`GDK_BACKEND=x11…` opt-in path**: sets `DRI_PRIME=1` (and the NVIDIA PRIME variables when
   `/proc/driver/nvidia/version` exists), calls `XInitThreads()`, and deliberately does **not** disable
-  compositing, which keeps hardware acceleration for Device / Setup Wizard / login pages.
+  compositing (the comment: the WebKit2GTK XWayland bug appears fixed in WebKit2GTK ≥ 2.42, and leaving
+  compositing on keeps hardware acceleration for Device / Setup Wizard / login pages).
 
 Runtime backend detection elsewhere uses Orca's `is_running_on_wayland()` / `is_running_on_x11()`
 (see `references/platforms.md`), not these environment variables.
 
 **Pitfall.**
-- **Rule:** On NVIDIA and hypervisor guests reach for `WEBKIT_DMABUF_RENDERER_FORCE_SHM` before
-  `WEBKIT_DISABLE_COMPOSITING_MODE`. **Why:** the proprietary driver and virtual GPUs cannot back WebKit's
-  hardware DMABUF renderer, leaving web views blank or slow; FORCE_SHM keeps accelerated compositing and only
-  skips the hardware path, while disabling compositing drops it. Threaded scrolling is a separate,
-  release-dependent default (off in 2.44/2.45, on from 2.46). `WEBKIT_DISABLE_DMABUF_RENDERER` is not a
-  substitute — it is read first, leaves the transport set empty (no compositing from 2.44 on, where the
-  X11/Wayland fallback renderers were removed) and has a reported crash path. On Debian/Ubuntu and
-  openSUSE the `isNVIDIA()` patch returns before the FORCE_SHM check, so `WEBKIT_FORCE_DMABUF_RENDERER=1`
-  must clear it first; that variable exists only in those patches. WebKit reads all of these once per
-  process, before the first WebView.
-  The test is `/proc/driver/nvidia/version`, so a hybrid laptop that renders on its iGPU also takes the
-  shared-memory path, which is a per-frame GPU readback rather than zero-copy; exporting
-  `WEBKIT_DMABUF_RENDERER_FORCE_SHM=0` in the environment restores the hardware path.
-  ```cpp
-  // Wrong: kills compositing and threaded scrolling (and can crash on modern WebKit)
-  ::setenv("WEBKIT_DISABLE_DMABUF_RENDERER", "1", false);
-  // Right: keep compositing, skip only the hardware DMABUF path
-  if (::access("/proc/driver/nvidia/version", F_OK) == 0 && WebView::SupportsForceSharedMemory()) {
-      ::setenv("WEBKIT_DMABUF_RENDERER_FORCE_SHM", "1", /*replace*/ false);
-      ::setenv("WEBKIT_FORCE_DMABUF_RENDERER", "1", /*replace*/ false);
-  }
-  ```
-  Cite: WebKit 2.52.6 `Source/WebKit/UIProcess/gtk/AcceleratedBackingStore.cpp`
-  (`rendererBufferTransportMode()`), Debian `disable-nvidia-dmabuf.patch`, WebKit bug 262607.
-- **Rule:** Set `WEBKIT_DISABLE_COMPOSITING_MODE` only on the default path, in the branch where wx
-  lacks EGL and Orca forces `GDK_BACKEND=x11`, non-replacing (`setenv(..., false)`, so a value the user
-  already exported wins), before GTK
-  initialises; never unconditionally, and only for the WebKitGTK releases that need it (older than
-  2.42, `WebView::NeedsCompositingWorkaround()`). Keep JS-side fallbacks so a page never
+- **Rule:** Set `WEBKIT_DISABLE_COMPOSITING_MODE` only on the default path in Wayland sessions,
+  non-replacing (`setenv(..., false)`, so a value the user already exported wins), before GTK
+  initialises; never unconditionally. Keep JS-side fallbacks so a page never
   waits forever for a C++→JS call.
-  **Why:** WebKit2GTK accelerated compositing could fail silently under XWayland before 2.42, leaving
-  web views blank (Setup Wizard stuck on "Loading..."); the variable also turns off threaded scrolling,
-  so applying it on a newer WebKit needlessly drops both GPU compositing and async scrolling (the
-  Device tab loses its smoothness); without the JS timeout the user is stuck when the signal is lost.
+  **Why:** WebKit2GTK accelerated compositing could fail silently under XWayland, leaving web views
+  blank (Setup Wizard stuck on "Loading..."); disabling it everywhere needlessly drops hardware
+  acceleration; without the JS timeout the user is stuck when the signal is lost.
   ```cpp
   // Wrong: unconditional, kills HW acceleration everywhere
   ::setenv("WEBKIT_DISABLE_COMPOSITING_MODE", "1", false);
-  // Right (default path only): non-replacing, before GTK init, WebKitGTK < 2.42,
-  // and only in the branch that forces GDK_BACKEND=x11 (wx without EGL), the
-  // case that runs through XWayland
-  if (WebView::NeedsCompositingWorkaround() && wayland && *wayland)
+  // Right (default path only): non-replacing, before GTK init, Wayland session with XWayland
+  if (display && *display && wayland && *wayland)
       ::setenv("WEBKIT_DISABLE_COMPOSITING_MODE", "1", /*replace*/ false);
   ```
   Cite: c12912e0df (`src/OrcaSlicer.cpp`; `resources/web/guide/0/load.js` `OnInit`

.github/workflows/build_all.yml

@@ -19,8 +19,6 @@ on:
      - 'build_linux.sh'
      - 'build_win.bat'
      - 'scripts/test_build_win.ps1'
-     - 'scripts/check_exception_throw_info.ps1'
-     - 'scripts/test_check_exception_throw_info.ps1'
      - 'build_release_macos.sh'
      - 'scripts/build_preset_cache.*'
      - 'scripts/flatpak/**'
@@ -43,8 +41,6 @@ on:
      - 'build_linux.sh'
      - 'build_win.bat'
      - 'scripts/test_build_win.ps1'
-     - 'scripts/check_exception_throw_info.ps1'
-     - 'scripts/test_check_exception_throw_info.ps1'
      - 'build_release_macos.sh'
      - 'scripts/build_preset_cache.*'
      - 'scripts/flatpak/**'
@@ -88,10 +84,6 @@ jobs:
         shell: powershell
         run: .\scripts\test_build_win.ps1
 
-      - name: Run the exception throw info check tests
-        shell: powershell
-        run: .\scripts\test_check_exception_throw_info.ps1
-
   build_linux:
     strategy:
       fail-fast: false

.github/workflows/build_orca.yml

@@ -65,6 +65,15 @@ jobs:
         shell: bash
         run: |
           leg="${{ runner.os }}-${{ inputs.arch || 'amd64' }}${{ runner.os == 'Windows' && format('-{0}', inputs.compiler) || '' }}"
+          # clang-cl refuses a precompiled header from another cl.exe build and ccache
+          # does not hash that build, so each one gets its own cache. The build number
+          # is read from cl.exe itself; the toolset directory keeps its name across patches.
+          if [ "${{ runner.os }}" = Windows ]; then
+            vswhere='/c/Program Files (x86)/Microsoft Visual Studio/Installer/vswhere.exe'
+            toolset=$(tr -d '\r\n' < "$("$vswhere" -latest -products '*' -find 'VC\Auxiliary\Build\Microsoft.VCToolsVersion.default.txt' | tr -d '\r')")
+            cl=$("$vswhere" -latest -products '*' -find 'VC\Tools\MSVC\'"$toolset"'\**\cl.exe' | tr -d '\r' | head -1)
+            leg="$leg-vc$("$cl" 2>&1 | grep -o -E 'Version [0-9.]+' | cut -d' ' -f2)"
+          fi
           echo "CCACHE_LEG=$leg" >> "$GITHUB_ENV"
           echo "CCACHE_ENTRY=ccache-$leg-${{ github.run_id }}-${{ github.run_attempt }}" >> "$GITHUB_ENV"
 
@@ -543,13 +552,6 @@ jobs:
           name: OrcaSlicer_profile_validator_Windows_${{ env.ver }}
           path: ${{ github.workspace }}/build/src/Release/OrcaSlicer_profile_validator.exe
 
-      - name: Check exception throw info Win
-        if: runner.os == 'Windows' && inputs.compiler == 'clang'
-        working-directory: ${{ github.workspace }}
-        # After the uploads, so a failure still leaves the build and its PDB to inspect, and before any deploy.
-        shell: pwsh
-        run: scripts\check_exception_throw_info.ps1 -BuildDir $env:BUILD_DIR
-
       - name: Deploy Windows release portable
         if: github.repository == 'OrcaSlicer/OrcaSlicer' && github.ref == 'refs/heads/main' && runner.os == 'Windows' && !vars.SELF_HOSTED
         uses: ./.github/actions/deploy-nightly

.github/workflows/check_profiles.yml

@@ -232,31 +232,6 @@ jobs:
           mkdir -p ${{ runner.temp }}/profile-check-results
           echo "${{ github.event.pull_request.number }}" > ${{ runner.temp }}/profile-check-results/pr_number.txt
 
-      # Builds a readable diff of the custom G-code the PR changes, which GitHub shows as
-      # one long line per setting, for check_profiles_comment.yml to post.
-      - name: Diff custom G-code
-        if: ${{ always() && github.event_name == 'pull_request' }}
-        continue-on-error: true
-        env:
-          PR_HEAD_SHA: ${{ github.event.pull_request.head.sha }}
-        run: |
-          git fetch --no-tags --depth=2 origin "$(git rev-parse HEAD)"
-          results=${{ runner.temp }}/profile-check-results
-          diff=${{ runner.temp }}/gcode_diff.md
-          # HEAD is the PR's merge commit, so HEAD^1 is the base it merges onto.
-          python3 ./scripts/orca_profile_tool.py gcode-diff --base HEAD^1 --head HEAD > "$diff"
-          if [ -s "$diff" ]; then
-            {
-              echo "<!-- profile-gcode-diff-comment -->"
-              cat "$diff"
-              echo ""
-              # The comment workflow finds this line as the only one starting with <sub>.
-              echo "<sub>For commit ${PR_HEAD_SHA} of this PR.</sub>"
-            } > "$results/gcode_diff.md"
-          fi
-          # Tells the comment workflow that a missing gcode_diff.md means no G-code changed.
-          touch "$results/gcode_diff_done.txt"
-
       - name: Prepare comment artifact
         if: ${{ always() && github.event_name == 'pull_request' && (steps.profile_tool.outcome == 'failure' || steps.legacy_compat.outcome == 'failure' || steps.validate_system.outcome == 'failure' || steps.validate_slice.outcome == 'failure' || steps.validate_filament_subtypes.outcome == 'failure' || steps.validate_custom.outcome == 'failure') }}
         run: |

.github/workflows/check_profiles_comment.yml

@@ -38,7 +38,6 @@ jobs:
         env:
           GH_TOKEN: ${{ github.token }}
           GH_REPO: ${{ github.repository }}
-          HEAD_SHA: ${{ github.event.workflow_run.head_sha }}
         run: |
           if [ ! -f pr_number.txt ]; then
             echo "No pr_number.txt in artifact, skipping."
@@ -50,72 +49,18 @@ jobs:
             echo "Invalid PR number: $PR_NUMBER"
             exit 1
           fi
-          # PR code wrote the artifact, so only a run for the named PR's current head may post.
-          if [ -z "$HEAD_SHA" ]; then
-            echo "The triggering run names no head commit."
-            exit 1
-          fi
-          if ! PR_HEAD=$(gh api "repos/${GH_REPO}/pulls/${PR_NUMBER}" --jq .head.sha); then
-            echo "Cannot look up PR #${PR_NUMBER}."
-            exit 1
-          fi
-          if [ "$HEAD_SHA" != "$PR_HEAD" ]; then
-            echo "${HEAD_SHA} is not the head of PR #${PR_NUMBER}; skipping."
-            exit 0
-          fi
-
-          # Lists every bot comment on the PR, one JSON object per line.
-          COMMENTS=$(gh api --paginate "repos/${GH_REPO}/issues/${PR_NUMBER}/comments" \
-            --jq '.[] | select(.user.login == "github-actions[bot]") | {id, body} | @json')
 
           # Delete prior comments matching the marker (from check_profiles.yml) or the legacy heading.
-          OLD_IDS=$(printf '%s\n' "$COMMENTS" | jq -r 'select((.body | startswith("<!-- profile-validation-comment -->")) or (.body | startswith("## :x: Profile Validation Errors"))) | .id')
+          OLD_IDS=$(gh api --paginate "repos/${GH_REPO}/issues/${PR_NUMBER}/comments" \
+            --jq '.[] | select(.user.login == "github-actions[bot]") | select((.body | startswith("<!-- profile-validation-comment -->")) or (.body | startswith("## :x: Profile Validation Errors"))) | .id')
           for comment_id in $OLD_IDS; do
             echo "Deleting outdated profile-validation comment ${comment_id}"
             gh api -X DELETE "repos/${GH_REPO}/issues/comments/${comment_id}" || true
           done
 
           # Post a new comment only when validation failed (pr_comment.md present).
-          # A failed post fails the job only after the G-code diff is handled.
-          failed=0
           if [ -f pr_comment.md ]; then
-            gh pr comment "$PR_NUMBER" --body-file pr_comment.md || failed=1
+            gh pr comment "$PR_NUMBER" --body-file pr_comment.md
           else
             echo "Validation succeeded; cleaned up prior comments without posting."
           fi
-
-          # Makes the G-code diff comment match gcode_diff.md, or deletes it if there is none.
-          update_gcode_diff_comment() {
-            if [ ! -f gcode_diff_done.txt ]; then
-              echo "The G-code diff step did not finish; leaving any G-code diff comment as it is."
-              return 0
-            fi
-            GCODE_IDS=$(printf '%s\n' "$COMMENTS" | jq -r 'select(.body | startswith("<!-- profile-gcode-diff-comment -->")) | .id')
-            if [ -f gcode_diff.md ] && [ "$(wc -c < gcode_diff.md)" -gt 65536 ]; then
-              echo "gcode_diff.md is over GitHub's comment limit; not posting it."
-              rm gcode_diff.md
-            fi
-            if [ -f gcode_diff.md ] && [ "$(echo "$GCODE_IDS" | wc -w)" -eq 1 ]; then
-              OLD_BODY=$(printf '%s\n' "$COMMENTS" | jq -r --argjson id "$GCODE_IDS" 'select(.id == $id) | .body' | tr -d '\r')
-              NEW_BODY=$(tr -d '\r' < gcode_diff.md)
-              if [ "$OLD_BODY" = "$NEW_BODY" ]; then
-                echo "G-code diff unchanged; keeping comment ${GCODE_IDS}."
-                return 0
-              fi
-              # Edits in place when only the <sub> line differs, since edits notify nobody.
-              if [ "$(grep -v '^<sub>' <<< "$OLD_BODY")" = "$(grep -v '^<sub>' <<< "$NEW_BODY")" ]; then
-                echo "G-code diff unchanged at a new commit; updating comment ${GCODE_IDS}."
-                gh api -X PATCH "repos/${GH_REPO}/issues/comments/${GCODE_IDS}" -F body=@gcode_diff.md > /dev/null
-                return 0
-              fi
-            fi
-            for comment_id in $GCODE_IDS; do
-              echo "Deleting outdated G-code diff comment ${comment_id}"
-              gh api -X DELETE "repos/${GH_REPO}/issues/comments/${comment_id}" || true
-            done
-            if [ -f gcode_diff.md ]; then
-              gh pr comment "$PR_NUMBER" --body-file gcode_diff.md
-            fi
-          }
-          update_gcode_diff_comment
-          exit "$failed"

AGENTS.md

@@ -91,7 +91,7 @@ See `.claude/skills/orca-translations/references/source-audit.md` for the full c
 ### Terminology
 
 - Use the [Localization glossary](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/developer_reference/localization_glossary.md) as the source of truth for recurring terms, so the same English term is always rendered the same way within a language, and terms that must stay in English (brand/product names, acronyms, materials, file formats, G-code tokens, macros/variables/identifiers) are not translated.
-- If a term's established translation changes, update both the affected `.po` files and the glossary (`developer_reference/glossary/<lang>.tsv` in the wiki, then regenerate) so they stay in sync.
+- If a term's established translation changes, update both the affected `.po` files and the glossary (`localization_glossary.tsv`, then regenerate) so they stay in sync.
 - Translate the *meaning*, not the words. Check what the string actually controls before translating it — English reuses one word for different things. `Flow ratio` (multiplier), `Flow Rate` (throughput) and `Flow Dynamics` (pressure compensation) are three different terms; `extruder` may mean the toolhead, the feeder motor, or the nozzle depending on the string.
 - Reuse one template per recurring message shape (`Failed to connect to …`, `Are you sure you want to …?`), even where the English wording varies.
 

CMakeLists.txt

@@ -288,19 +288,6 @@ if (APPLE)
     # Type"); Ninja/-Wall does not, and under -Werror it fails Xcode builds on code CI accepts.
     set(CMAKE_XCODE_ATTRIBUTE_GCC_WARN_64_TO_32_BIT_CONVERSION "NO")
 
-    # The Xcode generator ignores CMAKE_<LANG>_COMPILER_LAUNCHER, so hand the launcher to
-    # Xcode's own Compiler Launcher setting, which wraps every clang compile (C, C++,
-    # Objective-C++ and the precompiled header) with one program: the C++ launcher wins when
-    # both are set. The setting takes a single program path, not a CMake launcher list.
-    # Xcode versions without it ignore it and build uncached.
-    if (CMAKE_GENERATOR STREQUAL "Xcode")
-        if (CMAKE_CXX_COMPILER_LAUNCHER)
-            set(CMAKE_XCODE_ATTRIBUTE_C_COMPILER_LAUNCHER "${CMAKE_CXX_COMPILER_LAUNCHER}")
-        elseif (CMAKE_C_COMPILER_LAUNCHER)
-            set(CMAKE_XCODE_ATTRIBUTE_C_COMPILER_LAUNCHER "${CMAKE_C_COMPILER_LAUNCHER}")
-        endif ()
-    endif ()
-
     message(STATUS "Orca: IS_CROSS_COMPILE: ${IS_CROSS_COMPILE}")
 elseif (CMAKE_SYSTEM_NAME STREQUAL "Linux")
     set(CMAKE_INSTALL_RPATH "$ORIGIN")
@@ -321,14 +308,6 @@ if (IS_CROSS_COMPILE)
     set(BUILD_TESTS OFF CACHE BOOL "" FORCE)
 endif ()
 
-# With a precompiled header, clang-cl can omit an exception type's copy constructor from its throw info,
-# so copies of the exception share and double-free their data: https://github.com/llvm/llvm-project/issues/53486
-if (MSVC AND CMAKE_CXX_COMPILER_ID STREQUAL "Clang")
-    message(STATUS "clang-cl: building without the precompiled header (llvm/llvm-project#53486)")
-    set_property(CACHE SLIC3R_PCH PROPERTY HELPSTRING "Use precompiled headers (ignored with clang-cl, llvm/llvm-project#53486)")
-    set(SLIC3R_PCH OFF)
-endif ()
-
 # Print out the SLIC3R_* cache options
 get_cmake_property(_cache_vars CACHE_VARIABLES)
 list (SORT _cache_vars)

build_linux.sh

@@ -22,7 +22,7 @@ function usage() {
     echo "   -g: run the requested build steps inside a Docker/Podman Ubuntu 24.04 container similar to the GitHub Actions Linux runner"
     echo "   -h: prints this help text"
     echo "   -i: build the Orca Slicer AppImage (optional)"
-    echo "   -p: disable precompiled headers (on by default): more ccache hits after header changes, slower misses"
+    echo "   -p: boost ccache hit rate by disabling precompiled headers (default: ON)"
     echo "   -r: skip RAM and disk checks (low RAM compiling)"
     echo "   -s: build the Orca Slicer (optional)"
     echo "   -t: build tests (optional), requires -s flag"
@@ -473,8 +473,8 @@ fi
 # cmake 4.x compatibility workaround
 export CMAKE_POLICY_VERSION_MINIMUM=3.5
 
-DISTRIBUTION=$(awk -F= '/^ID=/ {print $2}' /etc/os-release | tr -d "'\"")
-DISTRIBUTION_LIKE=$(awk -F= '/^ID_LIKE=/ {print $2}' /etc/os-release | tr -d "'\"")
+DISTRIBUTION=$(awk -F= '/^ID=/ {print $2}' /etc/os-release | tr -d '"')
+DISTRIBUTION_LIKE=$(awk -F= '/^ID_LIKE=/ {print $2}' /etc/os-release | tr -d '"')
 # Check for direct distribution match to Ubuntu/Debian
 if [ "${DISTRIBUTION}" == "ubuntu" ] || [ "${DISTRIBUTION}" == "linuxmint" ] ; then
     DISTRIBUTION="debian"
@@ -549,20 +549,6 @@ fi
 if [ -n "${CMAKE_CCACHE}" ] ; then
     echo "${CMAKE_CCACHE} found, enabling compiler caching..."
     export CMAKE_CCACHE_ARGS=(-DCMAKE_C_COMPILER_LAUNCHER="${CMAKE_CCACHE}" -DCMAKE_CXX_COMPILER_LAUNCHER="${CMAKE_CCACHE}")
-    # The same ccache settings as the CI build. Without this sloppiness ccache refuses every
-    # compile that uses the precompiled header, which is most of OrcaSlicer, and skips headers
-    # a checkout has just written. It is added to the sloppiness already configured, and
-    # CCACHE_SLOPPINESS or CCACHE_(NO)DEPEND set in the environment win.
-    if [[ "$(basename "${CMAKE_CCACHE}")" == ccache ]] ; then
-        if [[ -z "${CCACHE_SLOPPINESS+x}" ]] ; then
-            CCACHE_SLOPPINESS=$("${CMAKE_CCACHE}" --get-config sloppiness 2>/dev/null || true)
-            export CCACHE_SLOPPINESS="${CCACHE_SLOPPINESS:+${CCACHE_SLOPPINESS},}pch_defines,time_macros,include_file_mtime,include_file_ctime"
-        fi
-        # Hash the includes the compiler reports instead of preprocessing every miss.
-        if [[ -z "${CCACHE_DEPEND+x}${CCACHE_NODEPEND+x}" ]] ; then
-            export CCACHE_DEPEND=1
-        fi
-    fi
 else
     echo "Note: ccache or sccache are not found. Install either of them for faster rebuilds."
 fi

build_release_macos.sh

@@ -47,7 +47,7 @@ while getopts ":dpa:snt:xbc:i:j:Tuh" opt; do
     u )
         export BUILD_TARGET="universal"
         ;;
-    h ) echo "Usage: ./build_release_macos.sh [-d] [-- CMAKE_ARGS...]"
+    h ) echo "Usage: ./build_release_macos.sh [-d]"
         echo "   -d: Build deps only"
         echo "   -a: Set ARCHITECTURE (arm64 or x86_64 or universal)"
         echo "   -s: Build slicer only"
@@ -60,33 +60,13 @@ while getopts ":dpa:snt:xbc:i:j:Tuh" opt; do
         echo "   -i: Add a prefix to ignore during CMake dependency discovery (repeatable), defaults to /opt/local:/usr/local:/opt/homebrew"
         echo "   -j: Set the number of parallel build jobs (CMAKE_BUILD_PARALLEL_LEVEL)"
         echo "   -T: Build and run tests (set ORCA_TESTS_BUILD_ONLY=1 to build without running)"
-        echo "   -- CMAKE_ARGS...: pass everything after '--' to the cmake configure step of the deps (-d) and slicer (-s) builds,"
-        echo "       e.g. -DDESTDIR=<dir> for the deps, -DCMAKE_PREFIX_PATH=<dir>/usr/local -DSLIC3R_PCH=OFF for the slicer, --fresh."
-        echo "       They come last on the cmake command line. Use absolute paths: cmake runs in the build directory."
         exit 0
         ;;
-    : )
-        echo "Option -${OPTARG} requires an argument, aborting."
-        exit 1
-        ;;
     * )
-        echo "Unknown option -${OPTARG}, aborting. CMake arguments must follow '--'."
-        exit 1
         ;;
   esac
 done
 
-# getopts stops at '--'; whatever follows is handed to cmake unchanged.
-if [[ ${OPTIND} -le $# ]] ; then
-    separator_index=$((OPTIND-1))
-    if [[ "${!separator_index}" != "--" ]] ; then
-        echo "Unexpected argument '${!OPTIND}': cmake arguments must follow '--', aborting."
-        exit 1
-    fi
-fi
-shift $((OPTIND-1))
-EXTRA_CMAKE_ARGS=("$@")
-
 # Set defaults
 
 if [ -z "$ARCH" ]; then
@@ -131,54 +111,6 @@ else
   export CMAKE_POLICY_COMPAT=""
 fi
 
-# Compiler cache, as in build_linux.sh. The program comes from CMAKE_CCACHE, else from a
-# launcher already set in the environment (the CI build sets ccache there), else sccache or
-# ccache from PATH; one program serves both languages. Each run applies its own choice to the
-# build directories, replacing a launcher an earlier run or a hand-run configure recorded.
-CMAKE_CCACHE_ARGS=()
-CCACHE_VAR=""
-for var in CMAKE_CCACHE CMAKE_CXX_COMPILER_LAUNCHER CMAKE_C_COMPILER_LAUNCHER; do
-    if [ -n "${!var:-}" ]; then
-        CCACHE_VAR=$var
-        break
-    fi
-done
-if [ -n "$CCACHE_VAR" ]; then
-    CCACHE_PROGRAM=${!CCACHE_VAR}
-    echo "Checking ${CCACHE_VAR} environment variable for compiler cache program..."
-    CMAKE_CCACHE=$(command -v "${CCACHE_PROGRAM}") || {
-        echo "${CCACHE_VAR} environment variable is set to '${CCACHE_PROGRAM}' but it was not found in PATH."
-        CMAKE_CCACHE=""
-    }
-elif command -v sccache >/dev/null 2>&1 ; then
-    CMAKE_CCACHE=$(command -v sccache)
-elif command -v ccache >/dev/null 2>&1 ; then
-    CMAKE_CCACHE=$(command -v ccache)
-fi
-if [ -n "${CMAKE_CCACHE}" ] ; then
-    echo "${CMAKE_CCACHE} found, enabling compiler caching..."
-    CMAKE_CCACHE_ARGS=(-DCMAKE_C_COMPILER_LAUNCHER="${CMAKE_CCACHE}" -DCMAKE_CXX_COMPILER_LAUNCHER="${CMAKE_CCACHE}")
-    # The same ccache settings as the CI build. Without this sloppiness ccache refuses every
-    # compile that uses the precompiled header, which is most of OrcaSlicer, and skips headers
-    # a checkout has just written. It is added to the sloppiness already configured, and
-    # CCACHE_SLOPPINESS or CCACHE_(NO)DEPEND set in the environment win.
-    if [[ "$(basename "${CMAKE_CCACHE}")" == ccache ]] ; then
-        if [[ -z "${CCACHE_SLOPPINESS+x}" ]] ; then
-            CCACHE_SLOPPINESS=$("${CMAKE_CCACHE}" --get-config sloppiness 2>/dev/null || true)
-            export CCACHE_SLOPPINESS="${CCACHE_SLOPPINESS:+${CCACHE_SLOPPINESS},}pch_defines,time_macros,include_file_mtime,include_file_ctime"
-        fi
-        # Hash the includes the compiler reports instead of preprocessing every miss.
-        if [[ -z "${CCACHE_DEPEND+x}${CCACHE_NODEPEND+x}" ]] ; then
-            export CCACHE_DEPEND=1
-        fi
-    fi
-else
-    echo "Note: ccache or sccache are not found. Install either of them for faster rebuilds."
-    # Clear a launcher recorded by an earlier configure. The entries must be set empty rather
-    # than removed: CMake fills a missing launcher entry from the environment.
-    CMAKE_CCACHE_ARGS=(-DCMAKE_C_COMPILER_LAUNCHER:STRING= -DCMAKE_CXX_COMPILER_LAUNCHER:STRING=)
-fi
-
 echo "Build params:"
 echo " - ARCH: $ARCH"
 echo " - BUILD_CONFIG: $BUILD_CONFIG"
@@ -230,9 +162,7 @@ function build_deps() {
                         -DCMAKE_OSX_ARCHITECTURES:STRING="${_ARCH}" \
                         -DCMAKE_OSX_DEPLOYMENT_TARGET="${OSX_DEPLOYMENT_TARGET}" \
                         -DCMAKE_IGNORE_PREFIX_PATH="${CMAKE_IGNORE_PREFIX_PATH}" \
-                        "${CMAKE_CCACHE_ARGS[@]}" \
-                        ${CMAKE_POLICY_COMPAT} \
-                        "${EXTRA_CMAKE_ARGS[@]}"
+                        ${CMAKE_POLICY_COMPAT}
                 fi
                 cmake --build . --config "$BUILD_CONFIG" --target deps
             )
@@ -334,9 +264,7 @@ function build_slicer() {
                     -DCMAKE_OSX_ARCHITECTURES="${_ARCH}" \
                     -DCMAKE_OSX_DEPLOYMENT_TARGET="${OSX_DEPLOYMENT_TARGET}" \
                     -DCMAKE_IGNORE_PREFIX_PATH="${CMAKE_IGNORE_PREFIX_PATH}" \
-                    "${CMAKE_CCACHE_ARGS[@]}" \
-                    ${CMAKE_POLICY_COMPAT} \
-                    "${EXTRA_CMAKE_ARGS[@]}"
+                    ${CMAKE_POLICY_COMPAT}
             fi
             cmake --build . --config "$BUILD_CONFIG" --target "$SLICER_BUILD_TARGET"
         )

build_win.bat

@@ -53,7 +53,7 @@ call :add_section "Build configuration"
 call :add_arg config string "" config "release, debug, relwithdebinfo or minsizerel (default: release)"
 call :add_arg target_arch string "" arch "x64 or arm64 (default: the host architecture)"
 call :add_arg slicer_asan bool a asan "Build the slicer with ASAN enabled"
-call :add_arg no_pch bool "" no-pch "Build without the precompiled header, implied by -l and --cache"
+call :add_arg no_pch bool "" no-pch "Build without the precompiled header, implied by --cache"
 
 call :add_section "Toolchain"
 call :add_arg use_clang_cl bool l clang-cl "Use clang-cl as the compiler"
@@ -388,9 +388,6 @@ if "%use_ninja%" == "ON" if "%use_msbuild%" == "ON" (
     exit /b 1
 )
 
-REM CMakeLists turns the precompiled header off for clang-cl (llvm/llvm-project#53486).
-if "%use_clang_cl%" == "ON" set "no_pch=ON"
-
 set "generator=!vs_gen_%vs_version%!"
 if "%use_ninja%" == "ON" (
     set "generator=Ninja Multi-Config"
@@ -546,7 +543,7 @@ REM real path rather than one glued onto the repository root.
 for %%p in ("!build_dir!") do set "build_full=%%~fp"
 echo Configuration: %build_type%, %arch%
 if not "%clang_exe%" == "" echo Compiler: %clang_exe%
-if "%build_slicer%" == "ON" if "%no_pch%" == "ON" echo Precompiled header: off
+if "%no_pch%" == "ON" echo Precompiled header: off
 if not "%cache_args%" == "" echo Compiler cache: %cache_exe%
 
 set "SIG_FLAG="
@@ -719,8 +716,8 @@ if "%build_slicer%" == "ON" (
         set "slicer_args=!slicer_args! -DSLIC3R_ASAN=ON"
     )
 
-    REM Under cl, a later -DSLIC3R_PCH=ON in ORCA_SLICER_CMAKE_ARGS still wins,
-    REM because CMake takes the last definition on the command line.
+    REM A later -DSLIC3R_PCH=ON in ORCA_SLICER_CMAKE_ARGS still wins, because
+    REM CMake takes the last definition on the command line.
     if "%no_pch%" == "ON" (
         set "slicer_args=!slicer_args! -DSLIC3R_PCH=OFF"
     )

deps/JPEG/JPEG.cmake

@@ -1,7 +1,22 @@
+if(CMAKE_SYSTEM_NAME STREQUAL "Linux")
+    if (JPEG_VERSION STREQUAL "6")
+        message("Using Jpeg Lib 62")
+        set(jpeg_flag "")
+    elseif (JPEG_VERSION STREQUAL "7")
+        message("Using Jpeg Lib 70")
+        set(jpeg_flag "-DWITH_JPEG7=ON")
+    else ()
+        message("Using Jpeg Lib 80")
+        set(jpeg_flag "-DWITH_JPEG8=ON")
+    endif ()
+endif()
+
 orcaslicer_add_cmake_project(JPEG
-    URL https://github.com/libjpeg-turbo/libjpeg-turbo/archive/refs/tags/3.2.0.zip
-    URL_HASH SHA256=1b4c2cb6cba1ca5e53b9e85eeeab02154cab4b70894c96e97a9c747a26d19d63
+    URL https://github.com/libjpeg-turbo/libjpeg-turbo/archive/refs/tags/3.0.1.zip
+    URL_HASH SHA256=d6d99e693366bc03897677650e8b2dfa76b5d6c54e2c9e70c03f0af821b0a52f
+    DEPENDS ${ZLIB_PKG}
     CMAKE_ARGS
         -DENABLE_SHARED=OFF
         -DENABLE_STATIC=ON
+        ${jpeg_flag}
 )

deps/OpenCV/OpenCV.cmake

@@ -26,7 +26,6 @@ orcaslicer_add_cmake_project(OpenCV
     URL https://github.com/opencv/opencv/archive/refs/tags/4.6.0.tar.gz
     URL_HASH SHA256=1ec1cba65f9f20fe5a41fda1586e01c70ea0c9a6d7b67c9e13edf0cfe2239277
     PATCH_COMMAND git apply ${OpenCV_DIRECTORY_FLAG} --verbose --ignore-space-change --whitespace=fix ${CMAKE_CURRENT_LIST_DIR}/0001-vs.patch  ${CMAKE_CURRENT_LIST_DIR}/0002-clang19-macos.patch
-    DEPENDS ${JPEG_PKG}
     CMAKE_ARGS
     -DBUILD_SHARED_LIBS=0
        -DBUILD_PERE_TESTS=OFF
@@ -35,8 +34,7 @@ orcaslicer_add_cmake_project(OpenCV
        -DBUILD_EXAMPLES=OFF
        -DBUILD_JASPER=OFF
        -DBUILD_JAVA=OFF
-       # Share Orca's libjpeg to avoid conflicting codec symbols in the application.
-       -DBUILD_JPEG=OFF
+       -DBUILD_JPEG=ON
        -DBUILD_APPS_LIST=version
        -DBUILD_opencv_apps=OFF
        -DBUILD_opencv_java=OFF
@@ -69,8 +67,7 @@ orcaslicer_add_cmake_project(OpenCV
        -DWITH_OPENJPEG=OFF
        -DWITH_QUIRC=OFF
        -DWITH_VTK=OFF
-       # Textured GLB/OBJ imports decode embedded and external JPEGs with cv::imdecode.
-       -DWITH_JPEG=ON
+       -DWITH_JPEG=OFF
        -DWITH_WEBP=OFF
        -DWITH_TIFF=OFF
        -DBUILD_TIFF=OFF

deps/OpenSSL/OpenSSL.cmake

@@ -16,8 +16,6 @@ else()
 	endif()
 endif()
 
-set(_openssl_dir ${DESTDIR})
-
 if(WIN32)
     set(_openssl_msvc_env CC=cl CXX=cl RC=rc CL=/FS)
     # OpenSSL's perl Configure honors the CC environment variable, but the
@@ -45,14 +43,6 @@ if(WIN32)
 else()
     if(APPLE)
         set(_conf_cmd export MACOSX_DEPLOYMENT_TARGET=${CMAKE_OSX_DEPLOYMENT_TARGET} && ./Configure -mmacosx-version-min=${CMAKE_OSX_DEPLOYMENT_TARGET})
-        # OPENSSLDIR is only where OpenSSL looks at runtime for cert.pem, certs/
-        # and openssl.cnf; install_sw installs nothing there. Point it at the
-        # system CA bundle, the one libcurl already uses here, so the bundled
-        # Python's ssl module can verify HTTPS. Elsewhere it stays the prefix:
-        # Windows Python reads the system certificate store, and on Linux, where
-        # the bundle's location differs by distro, CurlGlobalInit points
-        # SSL_CERT_FILE at it at startup.
-        set(_openssl_dir /etc/ssl)
     else()
         # A static library that is embedded into a shared object must not export
         # its symbols. On Linux the running process also loads the system OpenSSL
@@ -91,7 +81,7 @@ ExternalProject_Add(dep_OpenSSL
     # URL_HASH SHA256=8c776993154652d0bb393f506d850b811517c8bd8d24b1008aef57fbe55d3f31
     DOWNLOAD_DIR ${DEP_DOWNLOAD_DIR}/OpenSSL
 	CONFIGURE_COMMAND ${_conf_cmd} ${_cross_arch}
-        "--openssldir=${_openssl_dir}"
+        "--openssldir=${DESTDIR}"
         "--prefix=${DESTDIR}"
         # OpenSSL's linux-x86_64 target sets multilib=64, so it installs to
         # <prefix>/lib64 while every other dep uses <prefix>/lib. CPython's
@@ -125,12 +115,12 @@ ExternalProject_Add_Step(dep_OpenSSL install_cmake_files
     WORKING_DIRECTORY "${CMAKE_CURRENT_LIST_DIR}"
 )
 
-if (NOT WIN32)
-    # OpenSSL's object rules do not depend on the configured flags or paths, so
-    # reconfiguring it (a new compiler flag, a different --openssldir) relinks
-    # the archives from stale objects instead of recompiling them, and the
-    # change silently has no effect. Drop the objects whenever this recipe
-    # changes so the next build actually recompiles them.
+if (NOT WIN32 AND NOT APPLE)
+    # OpenSSL's object rules do not depend on CFLAGS, so reconfiguring it (for
+    # example to add -fvisibility=hidden) relinks the archives from stale
+    # objects instead of recompiling them, and the change silently has no
+    # effect. Drop the objects whenever this recipe changes so the next build
+    # actually recompiles them.
     ExternalProject_Get_Property(dep_OpenSSL SOURCE_DIR)
     ExternalProject_Add_Step(dep_OpenSSL clean_objects
         DEPENDEES configure

deps/python3/python3.cmake

@@ -365,11 +365,10 @@ if(TARGET dep_ZLIB)
     add_dependencies(dep_python3 dep_ZLIB)
 endif()
 
-if (NOT WIN32)
-    # _ssl and _hashlib embed the static OpenSSL built in deps/ (Windows uses
-    # CPython's prebuilt OpenSSL instead). Their Makefile rules depend only on
-    # their own sources, not on the OpenSSL archives, so a rebuilt OpenSSL does
-    # not make them relink and they keep the previous one. On an incremental tree,
+if (NOT WIN32 AND NOT APPLE)
+    # CPython's Makefile rules for _ssl and _hashlib depend only on their own
+    # sources, not on the OpenSSL archives, so a rebuilt OpenSSL does not make
+    # them relink and they keep the previous symbols. On an incremental tree,
     # drop the built modules and relink them against the current OpenSSL; a
     # fresh build is left alone (its PGO target builds them). "make" alone is a
     # no-op once PGO has run, so sharedmods is invoked explicitly.

deps/wxWidgets/wxWidgets.cmake

@@ -21,14 +21,6 @@ else ()
     set(_wx_edge "-DwxUSE_WEBVIEW_EDGE=OFF")
 endif ()
 
-# With a precompiled header, clang-cl can omit an exception type's copy constructor from its throw info,
-# so copies of the exception share and double-free their data: https://github.com/llvm/llvm-project/issues/53486
-if (MSVC AND CMAKE_C_COMPILER_ID STREQUAL "Clang")
-    set(_wx_precomp OFF)
-else ()
-    set(_wx_precomp ON)
-endif ()
-
 set(_wx_patch_command "")
 if (APPLE)
     set(_wx_patch_command
@@ -47,7 +39,7 @@ orcaslicer_add_cmake_project(
     PATCH_COMMAND ${_wx_patch_command}
     DEPENDS ${PNG_PKG} ${ZLIB_PKG} ${EXPAT_PKG} ${JPEG_PKG}
     CMAKE_ARGS
-        -DwxBUILD_PRECOMP=${_wx_precomp}
+        -DwxBUILD_PRECOMP=ON
         ${_wx_toolkit}
         "-DCMAKE_DEBUG_POSTFIX:STRING=${_wx_debug_postfix}"
         -DwxBUILD_DEBUG_LEVEL=0

docs/HLSD/adaptive-tpms-infill.md

@@ -1,8 +1,8 @@
-# Adaptive infill — High Level Design
+# Adaptive TPMS infill — High Level Design
 
 ## Purpose and scope
 
-`adaptive_infill_mode` grades the sparse infill of the Gyroid, TPMS-D and TPMS-FK
+`tpms_adaptive` grades the sparse infill of the Gyroid, TPMS-D and TPMS-FK
 patterns inside the object: the cells grow continuously from the surface
 towards the center of the object. `distance_warp`, `smooth_blend` and
 `stepped_shells` follow the distance to the nearest surface, including the top
@@ -10,8 +10,8 @@ and bottom, like concentric shells; `lobes` follows the whole 3D shape towards
 the center of each lobe of the object; `normal_z`, `normal_y` and `normal_x`
 follow each section of the object normal to that axis, so the grading does not
 change along the axis, as suits a profile extruded along it.
-`sparse_infill_density` is the density at the surface, `adaptive_infill_interior_density`
-the density at the center, and `adaptive_infill_gradient` picks how the density
+`sparse_infill_density` is the density at the surface, `tpms_interior_density`
+the density at the center, and `tpms_adaptive_gradient` picks how the density
 goes from one to the other. Only internal sparse infill is graded; the Gyroid
 Z-buckling optimization does not apply to it.
 
@@ -22,9 +22,9 @@ split into shells or blended between densities.
 
 ## Radial field
 
-`AdaptiveInfillField` gives every point of an object the center of its lobe and a
+`TpmsRadialField` gives every point of an object the center of its lobe and a
 radial coordinate: 0 at the center, 1 at the surface along the ray from the
-center. `PrintObject::prepare_adaptive_infill_fields()` builds it in
+center. `PrintObject::prepare_tpms_radial_fields()` builds it in
 `bridge_over_infill()`, next to the adaptive cubic octree, because the anchoring
 infill generated there has to match the printed infill. A field is built for
 every mode a region uses, and is shared by the regions using that mode: the
@@ -202,7 +202,7 @@ built for them.
 
 ## Constraints
 
-- With `adaptive_infill_mode` disabled, or for other patterns, the fill parameters are reset
+- With `tpms_adaptive` disabled, or for other patterns, the fill parameters are reset
   to their defaults, so they neither change the infill nor split fill batches.
 - `Layer::get_sparse_infill_max_void_area()` uses the sparser of the two
   densities, as the voids at the center are that large.

docs/HLSD/color-picker.md

@@ -1,131 +0,0 @@
-# Color picker
-
-The color picker is a local HTML dialog hosted by `ColorPickerDialog`, a
-`WebViewHostDialog` subclass. Its header and implementation own the ordered
-selection contract and shared filament conversion. Bridge validation, favorites
-persistence, placement and gettext strings remain private to the implementation.
-Its colors use the existing `ColorRGBA` utility.
-It uses a native title bar and fixed window border, allowing dragging but no
-manual resizing or maximization. Native title-bar colors use the application's
-shared dialog dark-theme update on creation and theme changes.
-Like SpeedDial, the host disables browser zoom accelerators, restores native
-WebView focus on activation and readiness, and synchronizes layout and the macOS
-viewport before repainting the backend. Activation never dismisses this modal
-dialog; focus restoration preserves an active editor and its partial input.
-The initialized page reports
-its intrinsic content height; native code validates the current page identifier
-and bounded numeric height, converts CSS pixels to device-independent window
-size, and fits within the display's work area. Identical sizes are ignored. The
-page observes content rather than viewport height, so resizing does not create
-a feedback loop; oversized content remains scrollable.
-The panel snapshots the triggering color or More Colors button's screen rectangle.
-It aligns below the button, flips above when needed, and clamps to that button's
-display work area on initial display. Later content and DPI changes update only
-the client size, preserving the position chosen by dragging the title bar.
-wxGTK clears the dialog's default
-parent-centering constraint and reapplies its native position after showing,
-bypassing wxGTK's requested-position cache. Absolute top-level placement remains
-subject to the window manager; Wayland compositors control it. The official filament palette's
-existing placement is independent of this custom panel.
-A solid selection contains one color; a gradient contains exactly two ordered
-endpoints. The bridge represents these as `{"type":"solid|gradient",
-"colors":["#RRGGBBAA", ...]}`. RGB input is also accepted and becomes opaque.
-Native validation rejects malformed hex and incorrect cardinality.
-
-The project filament color action and the official filament picker's More Colors
-action enable two-endpoint gradients and independent endpoint alpha. The preset
-combo box reads project colors in their stored vector order locally and applies
-changes through `sync_colour_config`,
-retaining the existing RGB/RGBA profile/project formats and dirty marking.
-Sidebar gradient and segmented multicolor swatches draw colors in the supplied
-order without sorting them.
-Opaque colors use `#RRGGBB`; nonopaque colors use `#RRGGBBAA`, including fully
-transparent alpha `00`. Initial selections, alpha-only edits and cancellation
-retain stored alpha. Ordered
-custom results bypass the official palette's `FilamentColor` set. Choosing an
-official swatch retains its existing palette behavior.
-The Linux sidebar's Change extruder color menu uses this same custom editor and
-the filament swatch anchor, including alpha, ordered gradients and configuration syncing.
-
-Striped colors and gradients with more than two endpoints cannot be represented
-by this editor. A notice explains that the current selection is retained; the
-editor starts from the first color, and unchanged confirmation is a no-op.
-Cancellation is also a no-op. If the WebView backend cannot initialize, a local
-unavailable panel offers Cancel and Escape, without opening a system color picker.
-
-Generic color option fields use an ordinary color button on every platform and
-open the same panel with gradients and alpha disabled. The panel is anchored to
-the field button. Empty or invalid field values remain undefined (the empty
-string), distinct from opaque black. Right-click resets to undefined. Cancel does
-not notify the field; confirmation and reset notify only when its RGB string
-changes. Programmatic assignments remain silent, and reading a field never
-writes legacy favorites.
-
-AMS material settings retain their fixed/AMS swatches and first-level popup. Only
-its custom-color action opens the solid, opaque editor, anchored to that custom
-control. The transient popup releases its grab while the modal is open and returns
-to the same selection on cancellation. Confirmation uses the existing default-color
-and packed RGBA event path. Device permission/status checks remain at the first-level
-entry.
-
-Texture import's color-mapping Add Material action opens a solid, opaque editor
-anchored to the mapping row. The existing filament limit is checked before opening.
-The first-level material popup closes as an action; its callback is copied before
-dismissal, so popup destruction does not invalidate the modal's completion path.
-Confirmation invokes the existing virtual-filament callback once; cancellation
-adds no material.
-
-Native gettext strings are installed at document start. Static page labels and
-palette names use stable English keys; RAL codes, channel symbols, and numeric
-labels remain data. The palette color values do not depend on the UI language.
-The application locale also sets the document language. Numeric editor validation
-uses the application's gettext messages, rather than browser language defaults;
-missing translations fall back to the stable English keys.
-
-The pure color/state regressions run with
-`node --test resources/web/dialog/ColorPickerDialog/colorpicker.test.js`.
-Optional real-browser regressions live beside them in
-`colorpicker.browser.test.js`. They use an existing Playwright installation
-(`ORCA_PLAYWRIGHT_MODULE` can name its module path) and an installed browser
-(`ORCA_BROWSER_EXECUTABLE` can name its executable), without adding a production
-dependency. They cover bridge initialization, capability combinations, invalid
-editor recovery, ordered endpoint alpha, favorites, gettext keys, and live theme
-changes. These browser checks complement native contract/persistence tests; they
-do not establish the full native modal confirmation and favorites journey.
-
-Gradient and alpha capabilities are independent and default off. Unsupported
-gradients are rejected; disabled alpha normalizes the selected result to opaque.
-Favorites retain both capabilities independently of the current caller. The page
-stores alpha as a byte and only converts to percentage when displaying or editing
-opacity, so switching endpoints does not change alpha precision.
-
-The page starts disabled. Each document supplies a page identifier in its ready
-message, receives native initialization, and acknowledges it before native code
-accepts confirmation or favorite updates. Repeated initialization does not reset
-edits, and messages from an obsolete document are ignored. Native WebView message
-handling is deferred and guarded by a lifetime token. Only a validated confirmation
-sets the optional result. Cancel, Escape and native window close leave it empty.
-
-Favorites belong to application configuration, separately from the selected result,
-in the editor configuration returned by `AppConfig::config_path()` under `data_dir()`.
-The `color_picker` section has string `version` equal to `1` and a `favorites`
-string containing a JSON array of typed selections. Native helpers normalize and
-deduplicate this array in order and limit it to 24 entries. Updates replace the
-entire section and immediately call `AppConfig::save()`, so accepted favorite
-changes survive cancellation. Empty arrays are saved explicitly. Core `AppConfig`
-only stores the raw section; color validation belongs to the GUI boundary.
-
-When the section is absent, valid solid colors from `custom_color_list` are imported
-once, without changing that legacy section. The legacy native picker saves decimal
-`r,g,b,a` byte strings; hexadecimal RGB and RGBA strings are also supported. Migration
-strictly validates all four decimal channels and preserves alpha. Gradient strings
-and malformed values are ignored. The new version and an empty array are
-saved even when there is nothing to import. A present section with an unknown or
-missing version is left untouched and disables favorite writes. Malformed version
-1 data is displayed as empty and remains on disk until the user explicitly saves
-a valid replacement. Other configuration sections and project/profile color
-formats are independent of this storage.
-
-Interface colors consume the host's `data-orca-theme` and `--orca-*` contract through
-shared styles. The picker opts into scoped global control roles. Application theme
-changes update UI surfaces without reloading the page or changing color data.

docs/HLSD/filament_id.md

@@ -350,11 +350,8 @@ identity default and translates nothing. `NetworkAgent` forwards both to the liv
 comparison sites below reach them through `wxGetApp().getAgent()` and leave an id untranslated
 while no agent is live. Whole documents are Bambu's business alone:
 `BBLPrinterAgent::to_orca_payload` and `from_orca_payload` rewrite every string under
-`tray_info_idx`, `filament_id`, `filamentId`, `cate` or `fila_id` at any depth; text that does not
-parse, or carries none of those keys, comes back unchanged. The last two are the H2C nozzle rack's:
-`cate` in the auto nozzle mapping request, `fila_id` in the rack status. A new Bambu message that
-carries a filament id under another key needs that key added to `filament_id_keys`, or the id
-crosses the boundary untranslated. The map is loaded once, lazily; a missing or malformed
+`tray_info_idx`, `filament_id` or `filamentId` at any depth; text that does not parse, or carries
+none of those keys, comes back unchanged. The map is loaded once, lazily; a missing or malformed
 file degrades to identity with a log line rather than failing.
 
 | Boundary | Where it translates |

docs/HLSD/keyboard-shortcuts.md

@@ -53,13 +53,6 @@ Space counts as typing. The speed dial's default is the one bare Space, and
 `MainFrame` leaves it to a focused control that uses Space itself (text fields, buttons,
 combo boxes), so it opens the dial from the canvases and the tab strip only.
 
-`MainFrame::handle_global_shortcut` skips a chord that `KeyChord::edits_text()` reports
-while a text field has the focus (a wx text entry, spin control, web view or ImGui
-InputText), and skips every chord while an ImGui modal is open, as a wx modal dialog
-would. `ImGuiWrapper::owns_key()` reads the active InputText and the popup stack
-directly, since `WantCaptureKeyboard` lags a frame, and is called only when the focus is on
-a visible canvas from `OpenGLManager::create_wxglcanvas()`.
-
 ## Which event a chord matches
 
 Letters, digits and special keys match on `wxEVT_KEY_DOWN`. Its key codes do not depend

docs/HLSD/travel-optimization.md

@@ -1,198 +0,0 @@
-# Travel optimization — High Level Design
-
-## Purpose and scope
-
-Inside an island, the infill paths of each region are chained into one print
-order by a greedy pass that joins the closest free path ends first. That pass
-leaves its longest joins for last, and they often cross the whole island. Two
-things shorten the travel between infill paths:
-
-- the fill generators join their lines into as few paths as they can, since
-  every separate path needs a travel to it;
-- the G-code export refines the greedy chain with a local search that shortens
-  the straight-line travel between the paths.
-
-The refinement covers every chain that `chain_and_reorder_extrusion_entities()`
-builds from a start point: the infill and ironing of `GCode::extrude_infill()`
-and the support of `GCode::extrude_support()`, as well as the order of objects
-and islands under `print_order` Default. It changes only the order and the
-direction of the paths, not the paths or the walls. Neither part has a setting.
-
-## The chain
-
-`ObjectByExtruder::Island::Region::append()` flattens every sortable fill
-collection into its paths, so the paths of all the fills of a region in one
-island are chained together. A collection that must keep its order (`no_sort`:
-monotonic, concentric, a forced fill order, the flow calibration) stays a single
-entry that cannot be reversed. Paths that must keep their direction cannot be
-reversed either: Grid's, since it alternates their direction between layers for
-strength, and those of a fill with a forced order. A loop starts and ends at the
-same point, so reversing it changes nothing.
-
-`extrude_infill()` chains each region from the current nozzle position with
-`chain_and_reorder_extrusion_entities()`, and chains the paths inside a nested
-sortable collection the same way; `extrude_support()` chains the support paths
-of a layer so too, unless they keep their order. The overload without a start
-point, used to chain collections while slicing, keeps the greedy chain. The
-order the fill generators give their paths does not reach the G-code for a
-sortable fill, which is chained again.
-
-## Connecting the lines
-
-Most patterns cut their lines at the infill boundary, and `Fill::connect_infill()`
-joins pairs of line ends that are neighbors on a boundary contour by the arc of
-wall between them, shortest arcs first, as long as neither end is joined yet and
-the join closes no loop. An arc is joined when it is shorter than
-`infill_anchor_max`, or than two anchors and a line width if that is longer:
-two ends further apart each get an anchor toward the other, and where those
-would meet, the join prints about as much wall as one path instead of two.
-
-Regular patterns leave many arcs of the same length, and the order among them
-decides the pairing. In an arbitrary order the pairs along one wall can fall out
-of step, such as lines 1–2 and 3–4, then 6–7 and 8–9, which leaves the end of
-line 5 loose, and every loose end starts or ends a separate path. So the arcs
-are also sorted in steps of half the line spacing and, within a step, along each
-contour forwards and backwards, which pairs the ends of a wall in one phase.
-Each order is replayed on the flags and a union-find of the lines, without
-building any path, and the one that joins the most lines is used; a tie keeps
-the shortest-first order.
-
-The replay includes the last pass, which joins any two open ends that are
-neighbors on a contour. With multiline infill the main pass leaves the copies of
-one line to that pass, so that each copy reaches a wall of its own. Two
-neighboring groups cut at both walls can then be joined at either wall by arcs
-of the same length: at one, their open ends stay next to their own copies, which
-the last pass joins, so each line prints out and back; at the other, the copies
-end up in separate paths printed apart.
-
-A line end left unpaired gets an anchor, a piece of the wall at most
-`infill_anchor` long. It runs toward the nearest open end of another path,
-looking up to 64 ends along the contour, since the next path usually starts
-there; without one it takes the side with more free wall. With multiline infill
-an anchor toward a copy of the same line stops short of the copy rather than
-printing over it. A copy is a neighboring end less than the group width
-(`multiline` spacings) across the line, at any wall angle, while the next group
-lies a whole line spacing away. Meeting the wall at an angle θ, the copy covers
-half a width over sin θ of the wall on each side of its end, so the anchor stops
-that far and half its own width before it, or is left out; the end still counts
-as anchored, so the last pass pairs the other ends as before.
-
-Last, `Fill::fill_surface_extrusion()` joins the sparse infill lines whose ends
-are at most two line spacings apart with a straight piece. With the anchors off
-(`infill_anchor_max` 0) nothing above runs and this is the only joining; with
-them on, it takes what the steps above leave next to each other, such as two
-anchors that stop just short of each other or a short piece cut off by a corner.
-A gap that short leaves no room to print anything in between, and as a travel it
-is the one hop a reordering can trade for a longer travel that retracts.
-Multiline copies leave the most such ends: one spacing apart across the line,
-their ends where it meets a wall at an angle θ are one spacing over sin θ apart
-along it, so two spacings reach walls met at 30° and steeper.
-
-Ends that meet are joined first, then the gaps between the leading ends of their
-lines, along each line's overall direction, then the rest, shortest first within
-each, without closing a loop or crossing a line or another join. Taking the
-leading ends first joins every pair of copies at the same side, which leaves
-their open ends next to each other; by length alone, neighboring pairs were
-joined at different walls and the travel between them crossed the island. Lines
-that cannot reverse, such as Grid's, only join the end of one to the start of the
-next, and fills that keep their order are left alone.
-
-## The search
-
-A chain of up to eight paths is found exactly, by dynamic programming over the
-subsets of paths: a state is the paths visited so far, the last one and its
-direction, about four thousand states for eight paths. The shared greedy
-chaining, `chain_segments_greedy_constrained_reversals_()`, does the same for two
-to four segments, which also orders up to four islands of a layer and the loops
-of a perimeter collection exactly. Either way the first path is no longer
-always the one nearest the start; with a free end, a path near the start can be
-worth leaving for last.
-
-Objects (`print_order` Default) and the tour of islands across objects are
-visited in the same order on every layer, so `chain_points_with_postprocessing()`
-orders them as a closed tour rather than an open chain. Up to ten points the
-shortest tour is found exactly by the same dynamic programming with the first
-point fixed; with a start point the tour then begins at the point nearest it.
-Larger sets take the greedy chain and alternate 2-opt, or-opt and crossing
-removal; or-opt moves runs of up to three points next to one of the eight points
-nearest an end of the run, found on the same grid as the chain's candidates.
-
-For longer chains, the search refines the greedy chain. On an island cut into many short pieces,
-such as infill without anchors, that chain can sweep away from the nozzle and
-come back for the rest with one long jump, which no local move below removes.
-So a nearest-next chain, going from the nozzle to the nearest free path end each
-time, is built too; when it is already shorter than the refined greedy chain, it
-is refined and used instead. Elsewhere it costs one grid query per path.
-
-`improve_chain_by_local_search()` sees the chain as a sequence of segments with
-an entry and an exit point each. Its cost is the straight distance from the
-nozzle to the first entry plus the distance from every exit to the next entry;
-the end of the chain is free. It applies three kinds of moves:
-
-- 2-opt reverses a run of segments, which flips each of them and replaces the
-  two links at the ends of the run.
-- Or-opt moves a run of up to three segments between two others, flipped or
-  not.
-- A run of any length that starts or ends next to the nozzle moves to the front.
-  Local search can settle on a chain that starts with a block of paths far from
-  the nozzle while the paths next to it sit in the middle, and moving that block
-  takes more than three segments at once.
-
-A move that would flip a segment that cannot be reversed is skipped, so such
-segments are only reordered.
-
-A move is tried only if every link it creates joins an end point to one of the
-32 end points nearest to it, which covers every move on a chain of up to 17
-segments, as most islands are; with 8 candidates the search missed most of the
-gain on grid-like patterns such as Triangles. The candidates come from a uniform
-grid of about two end points per cell, searched in rings of cells around the
-query. `KDTreeIndirect` visits its subtrees in a fixed order rather than the
-nearer one first, so a query for 32 points walks most of the tree, and on long
-chains finding the candidates would cost more than the search itself.
-
-The candidates of an end point are tried nearest first, and only while they are
-closer to it than the link the move would replace there. A 2-opt move that pays
-off creates a link shorter than the one it replaces at one of its two ends, so
-this misses no 2-opt move. An or-opt move is tried only while its new link is
-shorter than what taking the run out saves, which skips a few or-opt moves that
-would still pay off but cuts the search on long chains to a fraction.
-
-The search works through a queue of segments and applies the first move that
-shortens the chain around the segment it examines. After a move, only the
-segments next to a changed link are queued again. A new link can also make room
-for a run elsewhere that no segment next to it would try, so when the queue
-empties after any move, every segment is queued once more, and the search ends
-when such a sweep finds no move.
-
-Every move shortens the chain by more than `SCALED_EPSILON`, so the result is
-never longer than the greedy or the nearest-next chain and the search ends; a
-cap of 50 moves per segment only bounds its time. The search has no randomness
-and visits the segments in a fixed order, so the same input always gives the
-same G-code.
-
-## Cost
-
-Finding the candidates of an end point visits a few cells, and the nearest-next
-chain makes one such query per path, which only grows where the paths around the
-nozzle are used up and the chain jumps. Examining a segment tries at most a few
-hundred candidate links, usually only the nearest few, plus a scan of the chain
-for the move to the front when it is the first segment, and a move rewrites only
-the range of the chain it changes, so the search stays close to linear in the
-number of segments. Most islands hold a few to a few dozen paths; the cost shows
-on infill cut into thousands of pieces per island, such as dense infill with the
-anchors off. The straight joins only look at the line segments near a candidate
-join for crossings.
-
-## Limitations
-
-The search minimizes straight-line distance. It does not know which travels
-leave the infill area and retract under `reduce_infill_retraction`, nor the
-detours of `reduce_crossing_wall`, and a travel's time is not proportional to
-its length: a short travel is bound by acceleration, so its time grows about
-with the square root of its length. A chain that is shorter in total but trades
-very short travels for longer ones, or for ones past `retraction_minimum_travel`,
-can occasionally take a little longer to print.
-
-The end of the chain is free: it is not steered toward the next island or the
-start of the next layer. The regions of an island are chained one after the
-other, in region order, each from where the previous one ended.

localization/i18n/list.txt

@@ -325,7 +325,6 @@ src/slic3r/GUI/BaseTransparentDPIFrame.cpp
 src/slic3r/GUI/CloneDialog.cpp
 src/slic3r/GUI/ColorDecomposeDialog.cpp
 src/slic3r/GUI/ColorDecomposeSupport.cpp
-src/slic3r/GUI/ColorPickerDialog.cpp
 src/slic3r/GUI/ConfigWizard.cpp
 src/slic3r/GUI/DeviceCore/DevCalib.cpp
 src/slic3r/GUI/DeviceCore/DevUpgrade.cpp

resources/images/toolbar_tooltip.svg

@@ -1 +1 @@
-<?xml version="1.0" encoding="UTF-8"?><svg id="a" xmlns="http://www.w3.org/2000/svg" viewBox="0 0 15 15"><rect x="1.5" y="3.5" width="12" height="8" rx="1" ry="1" style="fill:none; stroke:#fefefe; stroke-linecap:round; stroke-linejoin:round;"/><path d="M3,5h1v1h-1Z M5,5h1v1h-1Z M7,5h1v1h-1Z M9,5h1v1h-1Z M11,5h1v1h-1Z M4,7h1v1h-1Z M6,7h1v1h-1Z M8,7h1v1h-1Z M10,7h1v1h-1Z M5,9h5v1h-5Z" style="fill:#fefefe;"/></svg>
+<?xml version="1.0" encoding="UTF-8"?><svg id="a" xmlns="http://www.w3.org/2000/svg" viewBox="0 0 15 15"><rect x="7" y="12" width="1" height="1" style="fill:#fefefe;"/><path d="M4.5,5.5c0-1.71,1.43-3.09,3.16-3,1.62.08,2.84,1.54,2.84,3.17h0c0,.61-.25,1.2-.69,1.62l-2.31,2.24v.97" style="fill:none; stroke:#fefefe; stroke-linecap:round; stroke-linejoin:round;"/></svg>

resources/profiles/OrcaFilamentLibrary.json

@@ -592,10 +592,6 @@
 			"name": "SUNLU PETG @base",
 			"sub_path": "filament/SUNLU/SUNLU PETG @base.json"
 		},
-		{
-			"name": "School House Spools PETG @base",
-			"sub_path": "filament/SchoolHouseSpools/School House Spools PETG @base.json"
-		},
 		{
 			"name": "eSUN PETG @base",
 			"sub_path": "filament/eSUN/eSUN PETG @base.json"
@@ -1100,10 +1096,6 @@
 			"name": "SUNLU Wood PLA @base",
 			"sub_path": "filament/SUNLU/SUNLU Wood PLA @base.json"
 		},
-		{
-			"name": "School House Spools PLA @base",
-			"sub_path": "filament/SchoolHouseSpools/School House Spools PLA @base.json"
-		},
 		{
 			"name": "Valment PLA @base",
 			"sub_path": "filament/Valment/Valment PLA @base.json"
@@ -2268,10 +2260,6 @@
 			"name": "SUNLU PETG @System",
 			"sub_path": "filament/SUNLU/SUNLU PETG @System.json"
 		},
-		{
-			"name": "School House Spools PETG @System",
-			"sub_path": "filament/SchoolHouseSpools/School House Spools PETG @System.json"
-		},
 		{
 			"name": "eSUN PETG @System",
 			"sub_path": "filament/eSUN/eSUN PETG @System.json"
@@ -3824,10 +3812,6 @@
 			"name": "SUNLU Wood PLA @System",
 			"sub_path": "filament/SUNLU/SUNLU Wood PLA @System.json"
 		},
-		{
-			"name": "School House Spools PLA @System",
-			"sub_path": "filament/SchoolHouseSpools/School House Spools PLA @System.json"
-		},
 		{
 			"name": "Valment PLA @System",
 			"sub_path": "filament/Valment/Valment PLA @System.json"

resources/profiles/OrcaFilamentLibrary/filament/SchoolHouseSpools/School House Spools PETG @System.json

@@ -1,18 +0,0 @@
-{
-	"type": "filament",
-	"name": "School House Spools PETG @System",
-	"inherits": "School House Spools PETG @base",
-	"from": "system",
-	"setting_id": "RSu2orfhR8ktT36h",
-	"instantiation": "true",
-	"filament_max_volumetric_speed": [
-		"13"
-	],
-	"filament_long_retractions_when_cut": [
-		"1"
-	],
-	"filament_retraction_distances_when_cut": [
-		"18"
-	],
-	"compatible_printers": []
-}

resources/profiles/OrcaFilamentLibrary/filament/SchoolHouseSpools/School House Spools PETG @base.json

@@ -1,80 +0,0 @@
-{
-	"type": "filament",
-	"name": "School House Spools PETG @base",
-	"inherits": "fdm_filament_pet",
-	"from": "system",
-	"filament_id": "OFnaCGQ9",
-	"instantiation": "false",
-	"cool_plate_temp": [
-		"0"
-	],
-	"cool_plate_temp_initial_layer": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"70"
-	],
-	"eng_plate_temp_initial_layer": [
-		"70"
-	],
-	"fan_cooling_layer_time": [
-		"30"
-	],
-	"fan_max_speed": [
-		"40"
-	],
-	"fan_min_speed": [
-		"10"
-	],
-	"filament_cost": [
-		"16.00"
-	],
-	"filament_density": [
-		"1.25"
-	],
-	"filament_flow_ratio": [
-		"0.95"
-	],
-	"filament_max_volumetric_speed": [
-		"8"
-	],
-	"filament_multitool_ramming_flow": [
-		"8"
-	],
-	"filament_vendor": [
-		"School House Spools"
-	],
-	"hot_plate_temp": [
-		"70"
-	],
-	"hot_plate_temp_initial_layer": [
-		"70"
-	],
-	"nozzle_temperature": [
-		"252"
-	],
-	"nozzle_temperature_initial_layer": [
-		"252"
-	],
-	"nozzle_temperature_range_high": [
-		"270"
-	],
-	"nozzle_temperature_range_low": [
-		"230"
-	],
-	"overhang_fan_speed": [
-		"90"
-	],
-	"overhang_fan_threshold": [
-		"10%"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"textured_plate_temp": [
-		"70"
-	],
-	"textured_plate_temp_initial_layer": [
-		"70"
-	]
-}

resources/profiles/OrcaFilamentLibrary/filament/SchoolHouseSpools/School House Spools PLA @System.json

@@ -1,18 +0,0 @@
-{
-	"type": "filament",
-	"name": "School House Spools PLA @System",
-	"inherits": "School House Spools PLA @base",
-	"from": "system",
-	"setting_id": "3rHJk6SVAvFzyHI0",
-	"instantiation": "true",
-	"filament_max_volumetric_speed": [
-		"21"
-	],
-	"filament_long_retractions_when_cut": [
-		"1"
-	],
-	"filament_retraction_distances_when_cut": [
-		"18"
-	],
-	"compatible_printers": []
-}

resources/profiles/OrcaFilamentLibrary/filament/SchoolHouseSpools/School House Spools PLA @base.json

@@ -1,35 +0,0 @@
-{
-	"type": "filament",
-	"name": "School House Spools PLA @base",
-	"inherits": "fdm_filament_pla",
-	"from": "system",
-	"filament_id": "OFHzwmT9",
-	"instantiation": "false",
-	"filament_cost": [
-		"17.00"
-	],
-	"filament_density": [
-		"1.26"
-	],
-	"filament_flow_ratio": [
-		"0.98"
-	],
-	"filament_max_volumetric_speed": [
-		"12"
-	],
-	"filament_vendor": [
-		"School House Spools"
-	],
-	"filament_scarf_seam_type": [
-		"none"
-	],
-	"filament_scarf_height": [
-		"10%"
-	],
-	"filament_scarf_gap": [
-		"0%"
-	],
-	"filament_scarf_length": [
-		"10"
-	]
-}

resources/profiles/Ratrig.json

@@ -1,6 +1,6 @@
 {
 	"name": "RatRig",
-	"version": "02.04.00.07",
+	"version": "02.04.00.06",
 	"force_update": "0",
 	"description": "RatRig configurations",
 	"machine_model_list": [

resources/profiles/Ratrig/machine/RatRig V-Core 4 300 0.4 nozzle.json

@@ -106,7 +106,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 300 0.5 nozzle.json

@@ -106,7 +106,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 300 0.6 nozzle.json

@@ -106,7 +106,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 300 0.8 nozzle.json

@@ -107,7 +107,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 400 0.4 nozzle.json

@@ -106,7 +106,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 400 0.5 nozzle.json

@@ -106,7 +106,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 400 0.6 nozzle.json

@@ -106,7 +106,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 400 0.8 nozzle.json

@@ -107,7 +107,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 500 0.4 nozzle.json

@@ -106,7 +106,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 500 0.5 nozzle.json

@@ -106,7 +106,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 500 0.6 nozzle.json

@@ -106,7 +106,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 500 0.8 nozzle.json

@@ -107,7 +107,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 300 0.4 nozzle.json

@@ -106,7 +106,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 300 0.5 nozzle.json

@@ -106,7 +106,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 300 0.6 nozzle.json

@@ -106,7 +106,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 300 0.8 nozzle.json

@@ -106,7 +106,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 400 0.4 nozzle.json

@@ -106,7 +106,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 400 0.5 nozzle.json

@@ -106,7 +106,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 400 0.6 nozzle.json

@@ -106,7 +106,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 400 0.8 nozzle.json

@@ -106,7 +106,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 500 0.4 nozzle.json

@@ -106,7 +106,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 500 0.5 nozzle.json

@@ -106,7 +106,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 500 0.6 nozzle.json

@@ -106,7 +106,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 500 0.8 nozzle.json

@@ -106,7 +106,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/fdm_klipper_common.json

@@ -131,7 +131,7 @@
 	"bed_exclude_area": [
 		"0x0"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single]",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
 	"machine_end_gcode": "END_PRINT",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",

resources/profiles/Snapmaker.json

@@ -1,6 +1,6 @@
 {
 	"name": "Snapmaker",
-	"version": "02.04.00.18",
+	"version": "02.04.00.17",
 	"force_update": "0",
 	"description": "Snapmaker configurations",
 	"machine_model_list": [

resources/profiles/Snapmaker/filament/Snapmaker ABS @U1 base.json

@@ -49,8 +49,5 @@
 	],
 	"pressure_advance": [
 		"0.02"
-	],
-	"temperature_vitrification": [
-		"100"
 	]
 }

resources/profiles/Snapmaker/filament/Snapmaker ASA @U1 base.json

@@ -46,8 +46,5 @@
 	],
 	"fan_min_speed": [
 		"0"
-	],
-	"temperature_vitrification": [
-		"100"
 	]
 }

resources/profiles/Snapmaker/filament/Snapmaker PETG @U1 base.json

@@ -45,7 +45,7 @@
 		"250"
 	],
 	"temperature_vitrification": [
-		"70"
+		"178"
 	],
 	"fan_max_speed": [
 		"20"

resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 base.json

@@ -4,8 +4,5 @@
 	"inherits": "fdm_filament_petg",
 	"from": "system",
 	"filament_id": "OFW8lqnb",
-	"instantiation": "false",
-	"temperature_vitrification": [
-		"70"
-	]
+	"instantiation": "false"
 }

resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1 base.json

@@ -60,7 +60,7 @@
 		"250"
 	],
 	"temperature_vitrification": [
-		"70"
+		"178"
 	],
 	"fan_max_speed": [
 		"20"

resources/profiles/Snapmaker/filament/Snapmaker PLA @U1 base.json

@@ -34,8 +34,5 @@
 	],
 	"nozzle_temperature": [
 		"220"
-	],
-	"temperature_vitrification": [
-		"45"
 	]
 }

resources/profiles/Snapmaker/filament/Snapmaker PLA Eco @U1 base.json

@@ -34,8 +34,5 @@
 	],
 	"filament_cooling_final_speed": [
 		"60"
-	],
-	"temperature_vitrification": [
-		"45"
 	]
 }

resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 base.json

@@ -34,8 +34,5 @@
 	],
 	"nozzle_temperature": [
 		"220"
-	],
-	"temperature_vitrification": [
-		"45"
 	]
 }

resources/profiles/Snapmaker/filament/Snapmaker PLA Metal @U1 base.json

@@ -40,8 +40,5 @@
 	],
 	"nozzle_temperature": [
 		"220"
-	],
-	"temperature_vitrification": [
-		"45"
 	]
 }

resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 base.json

@@ -31,8 +31,5 @@
 	],
 	"slow_down_layer_time": [
 		"8"
-	],
-	"temperature_vitrification": [
-		"45"
 	]
 }

resources/profiles/Snapmaker/filament/Snapmaker TPE @U1.json

@@ -50,8 +50,5 @@
 	"additional_cooling_fan_speed": [
 		"70",
 		"70"
-	],
-	"temperature_vitrification": [
-		"30"
 	]
 }

resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1 base.json

@@ -137,7 +137,7 @@
 		"240"
 	],
 	"temperature_vitrification": [
-		"30"
+		"60"
 	],
 	"nozzle_temperature_range_low": [
 		"200"

resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1.json

@@ -302,7 +302,7 @@
 		"-1"
 	],
 	"temperature_vitrification": [
-		"30"
+		"60"
 	],
 	"textured_cool_plate_temp": [
 		"40"

resources/profiles/Snapmaker/filament/Snapmaker TPU @U1.json

@@ -29,8 +29,5 @@
 	"additional_cooling_fan_speed": [
 		"70",
 		"70"
-	],
-	"temperature_vitrification": [
-		"30"
 	]
 }

resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1.json

@@ -49,8 +49,5 @@
 	"additional_cooling_fan_speed": [
 		"70",
 		"70"
-	],
-	"temperature_vitrification": [
-		"30"
 	]
 }

resources/profiles/Snapmaker/machine/Snapmaker U1 (0.2 nozzle).json

@@ -97,7 +97,7 @@
 		"20",
 		"12"
 	],
-	"machine_start_gcode": "SET_PRINT_AUTO_BED_LEVELING ENABLE=1\nSET_TIME_LAPSE_CAMERA ENABLE=1\n;===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\n;===== top cover purifier =====\n{if min_vitrification_temperature <= 50}\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=42 ALARM_TEMP=48 FAN_SPEED=0.6 DELAY_OFF=0 ; strong cooling\n{elsif min_vitrification_temperature <= 70}\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=45 ALARM_TEMP=51 FAN_SPEED=0.6 DELAY_OFF=0 ; weak cooling\n{else}\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=600 ; keep warm\n{endif}\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\n\n;==== 预挤出耗材 =====\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder]}\nT{initial_extruder}\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder]}\nSM_PRINT_PREEXTRUDE_FILAMENT INDEX={initial_extruder}\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nM107\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nM107\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nM106 S255\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\nM107\n{if curr_bed_type==\"High Temp Plate\"}                                                                                                                                                                                                               \nG28 Z Z_OFFSET -0.07                                                                                                                                                                                                                                    \n{else}                                                                                                                                                                                                               \nG28 Z                                                                                                                                                                                                                                                                                                                                                                                                                                                                          \n{endif} \n\n\n;===== 热床调平 =================\nM107\n{if curr_bed_type==\"High Temp Plate\"}                                                                                                                                                                                                               \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0 Z_OFFSET=-0.07\n{else}                                                                                                                                                                                                               \n; AlwLine truncated
+	"machine_start_gcode": "SET_PRINT_AUTO_BED_LEVELING ENABLE=1\nSET_TIME_LAPSE_CAMERA ENABLE=1\n;===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\n{if curr_bed_type==\"High Temp Plate\"}                                                                                                                                                                                                               \nG28 Z Z_OFFSET -0.07                                                                                                                                                                                                                                    \n{else}                                                                                                                                                                                                               \nG28 Z                                                                                                                                                                                                                                                                                                                                                                                                                                                                          \n{endif} \n\n\n;===== 热床调平 =================\n{if curr_bed_type==\"High Temp Plate\"}                                                                                                                                                                                                               \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0 Z_OFFSET=-0.07\n{else}                                                                                                                                                                                                               \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0\n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0",
 	"machine_tool_change_time": "5",
 	"max_layer_height": [
 		"0.14",

resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 nozzle).json

@@ -97,7 +97,7 @@
 		"20",
 		"12"
 	],
-	"machine_start_gcode": "SET_PRINT_AUTO_BED_LEVELING ENABLE=1\nSET_TIME_LAPSE_CAMERA ENABLE=1\n;===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\n;===== top cover purifier =====\n{if min_vitrification_temperature <= 50}\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=42 ALARM_TEMP=48 FAN_SPEED=0.6 DELAY_OFF=0 ; strong cooling\n{elsif min_vitrification_temperature <= 70}\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=45 ALARM_TEMP=51 FAN_SPEED=0.6 DELAY_OFF=0 ; weak cooling\n{else}\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=600 ; keep warm\n{endif}\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\n\n;==== 预挤出耗材 =====\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder]}\nT{initial_extruder}\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder]}\nSM_PRINT_PREEXTRUDE_FILAMENT INDEX={initial_extruder}\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nM107\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nM107\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nM106 S255\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\nM107\n{if curr_bed_type==\"High Temp Plate\"}                                                                                                                                                                                                               \nG28 Z Z_OFFSET -0.07                                                                                                                                                                                                                                    \n{else}                                                                                                                                                                                                               \nG28 Z                                                                                                                                                                                                                                                                                                                                                                                                                                                                          \n{endif} \n\n\n;===== 热床调平 =================\nM107\n{if curr_bed_type==\"High Temp Plate\"}                                                                                                                                                                                                               \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0 Z_OFFSET=-0.07\n{else}                                                                                                                                                                                                               \n; AlwLine truncated
+	"machine_start_gcode": "SET_PRINT_AUTO_BED_LEVELING ENABLE=1\nSET_TIME_LAPSE_CAMERA ENABLE=1\n;===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\n{if curr_bed_type==\"High Temp Plate\"}                                                                                                                                                                                                               \nG28 Z Z_OFFSET -0.07                                                                                                                                                                                                                                    \n{else}                                                                                                                                                                                                               \nG28 Z                                                                                                                                                                                                                                                                                                                                                                                                                                                                          \n{endif} \n\n\n;===== 热床调平 =================\n{if curr_bed_type==\"High Temp Plate\"}                                                                                                                                                                                                               \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0 Z_OFFSET=-0.07\n{else}                                                                                                                                                                                                               \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0\n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0",
 	"machine_tool_change_time": "5",
 	"max_layer_height": [
 		"0.32",