fix regression after merge

Merge branch 'main' into feat/plugin-pages
fix: crash on windows
2026-08-07 18:17:44 +00:00 · 2026-08-06 07:56:37 +08:00 · 2026-08-06 06:16:28 +08:00 · 2026-08-06 06:08:02 +08:00 · 2026-08-05 16:25:34 -03:00 · 2026-08-05 21:45:48 +08:00
333 changed files with 12397 additions and 2019 deletions
--- a/resources/profiles/Creality/process/0.08mm
+++ b/resources/profiles/Creality/process/0.08mm
@@ -39,7 +39,7 @@
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.15",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enable_prime_tower": "1",
 	"enable_support": "0",
--- a/resources/profiles/Creality/process/0.08mm
+++ b/resources/profiles/Creality/process/0.08mm
@@ -39,7 +39,7 @@
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.15",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enable_prime_tower": "1",
 	"enable_support": "0",
--- a/resources/profiles/Creality/process/0.08mm
+++ b/resources/profiles/Creality/process/0.08mm
@@ -39,7 +39,7 @@
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.15",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enable_prime_tower": "1",
 	"enable_support": "0",
--- a/resources/profiles/Creality/process/0.08mm
+++ b/resources/profiles/Creality/process/0.08mm
@@ -39,7 +39,7 @@
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.15",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enable_prime_tower": "1",
 	"enable_support": "0",
--- a/resources/profiles/Creality/process/0.08mm
+++ b/resources/profiles/Creality/process/0.08mm
@@ -39,7 +39,7 @@
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.15",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enable_prime_tower": "1",
 	"enable_support": "0",
--- a/resources/profiles/Creality/process/0.08mm
+++ b/resources/profiles/Creality/process/0.08mm
@@ -39,7 +39,7 @@
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.15",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enable_prime_tower": "1",
 	"enable_support": "0",
--- a/resources/profiles/Creality/process/0.16mm
+++ b/resources/profiles/Creality/process/0.16mm
@@ -39,7 +39,7 @@
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.15",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enable_prime_tower": "1",
 	"enable_support": "0",
--- a/resources/profiles/Creality/process/0.16mm
+++ b/resources/profiles/Creality/process/0.16mm
@@ -39,7 +39,7 @@
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.15",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enable_prime_tower": "1",
 	"enable_support": "0",
--- a/resources/profiles/Creality/process/0.16mm
+++ b/resources/profiles/Creality/process/0.16mm
@@ -38,7 +38,7 @@
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.15",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enable_prime_tower": "1",
 	"enable_support": "0",
--- a/resources/profiles/Creality/process/0.16mm
+++ b/resources/profiles/Creality/process/0.16mm
@@ -38,7 +38,7 @@
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.15",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enable_prime_tower": "1",
 	"enable_support": "0",
--- a/resources/profiles/Creality/process/0.16mm
+++ b/resources/profiles/Creality/process/0.16mm
@@ -39,7 +39,7 @@
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.15",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enable_prime_tower": "1",
 	"enable_support": "0",
--- a/resources/profiles/Creality/process/0.16mm
+++ b/resources/profiles/Creality/process/0.16mm
@@ -39,7 +39,7 @@
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.15",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enable_prime_tower": "1",
 	"enable_support": "0",
--- a/resources/profiles/Creality/process/0.16mm
+++ b/resources/profiles/Creality/process/0.16mm
@@ -39,7 +39,7 @@
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.15",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enable_prime_tower": "1",
 	"enable_support": "0",
--- a/resources/profiles/Creality/process/0.16mm
+++ b/resources/profiles/Creality/process/0.16mm
@@ -39,7 +39,7 @@
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.15",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enable_prime_tower": "1",
 	"enable_support": "0",
--- a/resources/profiles/Creality/process/0.20mm
+++ b/resources/profiles/Creality/process/0.20mm
@@ -128,7 +128,7 @@
 	"detect_narrow_internal_solid_infill": "1",
 	"dont_filter_internal_bridges": "disabled",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enforce_support_layers": "0",
 	"ensure_vertical_shell_thickness": "ensure_all",
--- a/resources/profiles/Creality/process/0.20mm
+++ b/resources/profiles/Creality/process/0.20mm
@@ -39,7 +39,7 @@
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.15",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enable_prime_tower": "1",
 	"enable_support": "0",
--- a/resources/profiles/Creality/process/0.20mm
+++ b/resources/profiles/Creality/process/0.20mm
@@ -124,7 +124,7 @@
 	"detect_narrow_internal_solid_infill": "1",
 	"dont_filter_internal_bridges": "disabled",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enforce_support_layers": "0",
 	"ensure_vertical_shell_thickness": "ensure_all",
--- a/resources/profiles/Creality/process/0.20mm
+++ b/resources/profiles/Creality/process/0.20mm
@@ -38,7 +38,7 @@
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.15",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enable_prime_tower": "1",
 	"enable_support": "0",
--- a/resources/profiles/Creality/process/0.20mm
+++ b/resources/profiles/Creality/process/0.20mm
@@ -128,7 +128,7 @@
 	"detect_narrow_internal_solid_infill": "1",
 	"dont_filter_internal_bridges": "disabled",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enforce_support_layers": "0",
 	"ensure_vertical_shell_thickness": "ensure_all",
--- a/resources/profiles/Creality/process/0.20mm
+++ b/resources/profiles/Creality/process/0.20mm
@@ -39,7 +39,7 @@
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.15",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enable_prime_tower": "1",
 	"enable_support": "0",
--- a/resources/profiles/Creality/process/0.20mm
+++ b/resources/profiles/Creality/process/0.20mm
@@ -128,7 +128,7 @@
 	"detect_narrow_internal_solid_infill": "1",
 	"dont_filter_internal_bridges": "disabled",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enforce_support_layers": "0",
 	"ensure_vertical_shell_thickness": "ensure_all",
--- a/resources/profiles/Creality/process/0.20mm
+++ b/resources/profiles/Creality/process/0.20mm
@@ -39,7 +39,7 @@
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.15",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enable_prime_tower": "1",
 	"enable_support": "0",
--- a/resources/profiles/Creality/process/0.24mm
+++ b/resources/profiles/Creality/process/0.24mm
@@ -39,7 +39,7 @@
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.15",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enable_prime_tower": "1",
 	"enable_support": "0",
--- a/resources/profiles/Creality/process/0.24mm
+++ b/resources/profiles/Creality/process/0.24mm
@@ -39,7 +39,7 @@
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.15",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enable_prime_tower": "1",
 	"enable_support": "0",
--- a/resources/profiles/Creality/process/0.24mm
+++ b/resources/profiles/Creality/process/0.24mm
@@ -38,7 +38,7 @@
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.15",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enable_prime_tower": "1",
 	"enable_support": "0",
--- a/resources/profiles/Creality/process/0.24mm
+++ b/resources/profiles/Creality/process/0.24mm
@@ -38,7 +38,7 @@
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.15",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enable_prime_tower": "1",
 	"enable_support": "0",
--- a/resources/profiles/Creality/process/0.24mm
+++ b/resources/profiles/Creality/process/0.24mm
@@ -39,7 +39,7 @@
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.15",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enable_prime_tower": "1",
 	"enable_support": "0",
--- a/resources/profiles/Creality/process/0.24mm
+++ b/resources/profiles/Creality/process/0.24mm
@@ -39,7 +39,7 @@
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.15",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enable_prime_tower": "1",
 	"enable_support": "0",
--- a/resources/profiles/Creality/process/0.24mm
+++ b/resources/profiles/Creality/process/0.24mm
@@ -39,7 +39,7 @@
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.15",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enable_prime_tower": "1",
 	"enable_support": "0",
--- a/resources/profiles/Creality/process/0.24mm
+++ b/resources/profiles/Creality/process/0.24mm
@@ -39,7 +39,7 @@
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.15",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enable_prime_tower": "1",
 	"enable_support": "0",
--- a/resources/profiles/Creality/process/0.30mm
+++ b/resources/profiles/Creality/process/0.30mm
@@ -126,7 +126,7 @@
 	"detect_narrow_internal_solid_infill": "1",
 	"dont_filter_internal_bridges": "disabled",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enforce_support_layers": "0",
 	"ensure_vertical_shell_thickness": "ensure_all",
--- a/resources/profiles/Creality/process/0.30mm
+++ b/resources/profiles/Creality/process/0.30mm
@@ -38,7 +38,7 @@
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.15",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enable_prime_tower": "0",
 	"enable_support": "0",
--- a/resources/profiles/Creality/process/0.30mm
+++ b/resources/profiles/Creality/process/0.30mm
@@ -126,7 +126,7 @@
 	"detect_narrow_internal_solid_infill": "1",
 	"dont_filter_internal_bridges": "disabled",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enforce_support_layers": "0",
 	"ensure_vertical_shell_thickness": "ensure_all",
--- a/resources/profiles/Creality/process/0.30mm
+++ b/resources/profiles/Creality/process/0.30mm
@@ -126,7 +126,7 @@
 	"detect_narrow_internal_solid_infill": "1",
 	"dont_filter_internal_bridges": "disabled",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enforce_support_layers": "0",
 	"ensure_vertical_shell_thickness": "ensure_all",
--- a/resources/profiles/Creality/process/0.40mm
+++ b/resources/profiles/Creality/process/0.40mm
@@ -126,7 +126,7 @@
 	"detect_narrow_internal_solid_infill": "1",
 	"dont_filter_internal_bridges": "disabled",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enforce_support_layers": "0",
 	"ensure_vertical_shell_thickness": "ensure_all",
--- a/resources/profiles/Creality/process/0.40mm
+++ b/resources/profiles/Creality/process/0.40mm
@@ -126,7 +126,7 @@
 	"detect_narrow_internal_solid_infill": "1",
 	"dont_filter_internal_bridges": "disabled",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enforce_support_layers": "0",
 	"ensure_vertical_shell_thickness": "ensure_all",
--- a/resources/profiles/Creality/process/0.40mm
+++ b/resources/profiles/Creality/process/0.40mm
@@ -126,7 +126,7 @@
 	"detect_narrow_internal_solid_infill": "1",
 	"dont_filter_internal_bridges": "disabled",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enforce_support_layers": "0",
 	"ensure_vertical_shell_thickness": "ensure_all",
--- a/resources/profiles/Custom.json
+++ b/resources/profiles/Custom.json
@@ -1,6 +1,6 @@
 {
 	"name": "Custom Printer",
-	"version": "02.04.00.01",
+	"version": "02.04.00.02",
 	"force_update": "0",
 	"description": "My configurations",
 	"machine_model_list": [
--- a/resources/profiles/Custom/filament/Generic
+++ b/resources/profiles/Custom/filament/Generic
@@ -24,12 +24,6 @@
 	"filament_loading_speed_start": [
 		"50"
 	],
-	"filament_multitool_ramming": [
-		"1"
-	],
-	"filament_multitool_ramming_flow": [
-		"40"
-	],
 	"filament_stamping_distance": [
 		"45"
 	],
--- a/resources/profiles/Custom/filament/Generic
+++ b/resources/profiles/Custom/filament/Generic
@@ -24,12 +24,6 @@
 	"filament_loading_speed_start": [
 		"50"
 	],
-	"filament_multitool_ramming": [
-		"1"
-	],
-	"filament_multitool_ramming_flow": [
-		"40"
-	],
 	"filament_stamping_distance": [
 		"45"
 	],
--- a/resources/profiles/Custom/filament/Generic
+++ b/resources/profiles/Custom/filament/Generic
@@ -24,12 +24,6 @@
 	"filament_loading_speed_start": [
 		"50"
 	],
-	"filament_multitool_ramming": [
-		"1"
-	],
-	"filament_multitool_ramming_flow": [
-		"40"
-	],
 	"filament_stamping_distance": [
 		"45"
 	],
--- a/resources/profiles/Custom/filament/Generic
+++ b/resources/profiles/Custom/filament/Generic
@@ -24,12 +24,6 @@
 	"filament_loading_speed_start": [
 		"50"
 	],
-	"filament_multitool_ramming": [
-		"1"
-	],
-	"filament_multitool_ramming_flow": [
-		"40"
-	],
 	"filament_stamping_distance": [
 		"45"
 	],
--- a/resources/profiles/Custom/filament/Generic
+++ b/resources/profiles/Custom/filament/Generic
@@ -25,12 +25,6 @@
 	"filament_loading_speed_start": [
 		"50"
 	],
-	"filament_multitool_ramming": [
-		"1"
-	],
-	"filament_multitool_ramming_flow": [
-		"40"
-	],
 	"filament_stamping_distance": [
 		"45"
 	],
--- a/resources/profiles/Custom/filament/Generic
+++ b/resources/profiles/Custom/filament/Generic
@@ -25,12 +25,6 @@
 	"filament_loading_speed_start": [
 		"50"
 	],
-	"filament_multitool_ramming": [
-		"1"
-	],
-	"filament_multitool_ramming_flow": [
-		"40"
-	],
 	"filament_stamping_distance": [
 		"45"
 	],
--- a/resources/profiles/Custom/filament/Generic
+++ b/resources/profiles/Custom/filament/Generic
@@ -25,12 +25,6 @@
 	"filament_loading_speed_start": [
 		"50"
 	],
-	"filament_multitool_ramming": [
-		"1"
-	],
-	"filament_multitool_ramming_flow": [
-		"40"
-	],
 	"filament_stamping_distance": [
 		"45"
 	],
--- a/resources/profiles/Custom/filament/Generic
+++ b/resources/profiles/Custom/filament/Generic
@@ -25,12 +25,6 @@
 	"filament_loading_speed_start": [
 		"50"
 	],
-	"filament_multitool_ramming": [
-		"1"
-	],
-	"filament_multitool_ramming_flow": [
-		"40"
-	],
 	"filament_stamping_distance": [
 		"45"
 	],
--- a/resources/profiles/Custom/filament/Generic
+++ b/resources/profiles/Custom/filament/Generic
@@ -25,12 +25,6 @@
 	"filament_loading_speed_start": [
 		"50"
 	],
-	"filament_multitool_ramming": [
-		"1"
-	],
-	"filament_multitool_ramming_flow": [
-		"40"
-	],
 	"filament_stamping_distance": [
 		"45"
 	],
--- a/resources/profiles/Custom/machine/fdm_klipper_common.json
+++ b/resources/profiles/Custom/machine/fdm_klipper_common.json
@@ -116,7 +116,7 @@
 	"deretraction_speed": [
 		"30"
 	],
-	"z_hop_types": "Normal Lift",
+	"z_hop_types": "Slope Lift",
 	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"change_filament_gcode": "",
--- a/resources/profiles/Custom/machine/fdm_repetier_common.json
+++ b/resources/profiles/Custom/machine/fdm_repetier_common.json
@@ -118,7 +118,7 @@
 	"deretraction_speed": [
 		"30"
 	],
-	"z_hop_types": "Normal Lift",
+	"z_hop_types": "Slope Lift",
 	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"change_filament_gcode": "",
--- a/resources/profiles/Custom/machine/fdm_rrf_common.json
+++ b/resources/profiles/Custom/machine/fdm_rrf_common.json
@@ -116,7 +116,7 @@
 	"deretraction_speed": [
 		"30"
 	],
-	"z_hop_types": "Normal Lift",
+	"z_hop_types": "Slope Lift",
 	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"change_filament_gcode": "",
--- a/resources/profiles/Custom/machine/fdm_toolchanger_common.json
+++ b/resources/profiles/Custom/machine/fdm_toolchanger_common.json
@@ -172,11 +172,11 @@
 		"0.4"
 	],
 	"z_hop_types": [
-		"Normal Lift",
-		"Normal Lift",
-		"Normal Lift",
-		"Normal Lift",
-		"Normal Lift"
+		"Slope Lift",
+		"Slope Lift",
+		"Slope Lift",
+		"Slope Lift",
+		"Slope Lift"
 	],
 	"purge_in_prime_tower": "0",
 	"machine_pause_gcode": "M601",
--- a/resources/profiles/OrcaFilamentLibrary.json
+++ b/resources/profiles/OrcaFilamentLibrary.json
@@ -1,6 +1,6 @@
 {
 	"name": "OrcaFilamentLibrary",
-	"version": "02.04.00.03",
+	"version": "02.04.00.04",
 	"force_update": "0",
 	"description": "Orca Filament Library",
 	"filament_list": [
--- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu
@@ -36,6 +36,9 @@
 	"filament_max_volumetric_speed": [
 		"8"
 	],
+	"filament_multitool_ramming_flow": [
+		"8"
+	],
 	"filament_type": [
 		"PET-CF"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu
@@ -39,6 +39,9 @@
 	"filament_max_volumetric_speed": [
 		"8"
 	],
+	"filament_multitool_ramming_flow": [
+		"8"
+	],
 	"filament_vendor": [
 		"Bambu Lab"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu
@@ -39,6 +39,9 @@
 	"filament_max_volumetric_speed": [
 		"6"
 	],
+	"filament_multitool_ramming_flow": [
+		"6"
+	],
 	"filament_vendor": [
 		"Bambu Lab"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu
@@ -21,6 +21,9 @@
 	"filament_max_volumetric_speed": [
 		"6"
 	],
+	"filament_multitool_ramming_flow": [
+		"6"
+	],
 	"filament_type": [
 		"PLA-AERO"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu
@@ -27,6 +27,9 @@
 	"filament_max_volumetric_speed": [
 		"6"
 	],
+	"filament_multitool_ramming_flow": [
+		"6"
+	],
 	"filament_scarf_seam_type": [
 		"none"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu
@@ -21,6 +21,9 @@
 	"filament_max_volumetric_speed": [
 		"6"
 	],
+	"filament_multitool_ramming_flow": [
+		"6"
+	],
 	"filament_vendor": [
 		"Bambu Lab"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX
+++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX
@@ -36,6 +36,9 @@
 	"filament_max_volumetric_speed": [
 		"1"
 	],
+	"filament_multitool_ramming_flow": [
+		"1"
+	],
 	"filament_retraction_minimum_travel": [
 		"3"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/Elas/Elas
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Elas/Elas
@@ -72,15 +72,6 @@
 	"fan_min_speed": [
 		"10"
 	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
 	"filament_cost": [
 		"599"
 	],
@@ -99,30 +90,12 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
 	"filament_long_retractions_when_cut": [
 		"nil"
 	],
 	"filament_max_volumetric_speed": [
 		"15"
 	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"0"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"10"
-	],
-	"filament_multitool_ramming_volume": [
-		"10"
-	],
 	"filament_notes": [
 		""
 	],
@@ -165,21 +138,6 @@
 	"filament_soluble": [
 		"0"
 	],
-	"filament_stamping_distance": [
-		"0"
-	],
-	"filament_stamping_loading_speed": [
-		"0"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
 	"filament_vendor": [
 		"Elas"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/Elas/Elas
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Elas/Elas
@@ -42,15 +42,6 @@
 	"fan_min_speed": [
 		"20"
 	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
 	"filament_cost": [
 		"445"
 	],
@@ -69,30 +60,12 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
 	"filament_long_retractions_when_cut": [
 		"1"
 	],
 	"filament_max_volumetric_speed": [
 		"18"
 	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"0"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"10"
-	],
-	"filament_multitool_ramming_volume": [
-		"10"
-	],
 	"filament_notes": [
 		""
 	],
@@ -135,21 +108,6 @@
 	"filament_soluble": [
 		"0"
 	],
-	"filament_stamping_distance": [
-		"0"
-	],
-	"filament_stamping_loading_speed": [
-		"0"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
 	"filament_wipe": [
 		"nil"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/Elas/Elas
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Elas/Elas
@@ -71,15 +71,6 @@
 	"fan_min_speed": [
 		"60"
 	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
 	"filament_cost": [
 		"449.5"
 	],
@@ -98,30 +89,12 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
 	"filament_long_retractions_when_cut": [
 		"nil"
 	],
 	"filament_max_volumetric_speed": [
 		"25"
 	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"0"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"10"
-	],
-	"filament_multitool_ramming_volume": [
-		"10"
-	],
 	"filament_notes": [
 		""
 	],
@@ -164,21 +137,6 @@
 	"filament_soluble": [
 		"0"
 	],
-	"filament_stamping_distance": [
-		"0"
-	],
-	"filament_stamping_loading_speed": [
-		"0"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
 	"filament_vendor": [
 		"Elas"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/Elas/Elas
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Elas/Elas
@@ -71,15 +71,6 @@
 	"fan_min_speed": [
 		"100"
 	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
 	"filament_cost": [
 		"500"
 	],
@@ -98,30 +89,12 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
 	"filament_long_retractions_when_cut": [
 		"nil"
 	],
 	"filament_max_volumetric_speed": [
 		"18"
 	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"0"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"10"
-	],
-	"filament_multitool_ramming_volume": [
-		"10"
-	],
 	"filament_notes": [
 		""
 	],
@@ -164,21 +137,6 @@
 	"filament_soluble": [
 		"0"
 	],
-	"filament_stamping_distance": [
-		"0"
-	],
-	"filament_stamping_loading_speed": [
-		"0"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
 	"filament_vendor": [
 		"Elas"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo
@@ -24,6 +24,9 @@
 	"filament_max_volumetric_speed": [
 		"6"
 	],
+	"filament_multitool_ramming_flow": [
+		"6"
+	],
 	"nozzle_temperature": [
 		"290"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo
@@ -35,6 +35,9 @@
 	"filament_max_volumetric_speed": [
 		"8"
 	],
+	"filament_multitool_ramming_flow": [
+		"8"
+	],
 	"filament_vendor": [
 		"Elegoo"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo
@@ -12,6 +12,9 @@
 	"filament_max_volumetric_speed": [
 		"10"
 	],
+	"filament_multitool_ramming_flow": [
+		"10"
+	],
 	"nozzle_temperature": [
 		"220"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/Eolas
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Eolas
@@ -44,5 +44,8 @@
 	],
 	"filament_max_volumetric_speed": [
 		"10"
+	],
+	"filament_multitool_ramming_flow": [
+		"10"
 	]
 }
--- a/resources/profiles/OrcaFilamentLibrary/filament/Eolas
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Eolas
@@ -44,5 +44,8 @@
 	],
 	"filament_max_volumetric_speed": [
 		"8"
+	],
+	"filament_multitool_ramming_flow": [
+		"8"
 	]
 }
--- a/resources/profiles/OrcaFilamentLibrary/filament/Generic
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Generic
@@ -10,5 +10,8 @@
 	"filament_type": [
 		"PA-CF"
 	],
+	"filament_multitool_ramming_flow": [
+		"8"
+	],
 	"compatible_printers": []
 }
--- a/resources/profiles/OrcaFilamentLibrary/filament/Generic
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Generic
@@ -8,5 +8,8 @@
 	"filament_max_volumetric_speed": [
 		"20"
 	],
+	"filament_multitool_ramming_flow": [
+		"20"
+	],
 	"compatible_printers": []
 }
--- a/resources/profiles/OrcaFilamentLibrary/filament/Generic
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Generic
@@ -17,6 +17,9 @@
 	"filament_max_volumetric_speed": [
 		"11.5"
 	],
+	"filament_multitool_ramming_flow": [
+		"13"
+	],
 	"overhang_fan_speed": [
 		"100"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/Generic
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Generic
@@ -12,6 +12,9 @@
 	"filament_max_volumetric_speed": [
 		"18"
 	],
+	"filament_multitool_ramming_flow": [
+		"25"
+	],
 	"slow_down_layer_time": [
 		"4"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/Generic
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Generic
@@ -8,6 +8,9 @@
 	"filament_max_volumetric_speed": [
 		"11"
 	],
+	"filament_multitool_ramming_flow": [
+		"11"
+	],
 	"filament_retraction_length": [
 		"0.8"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/Generic
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Generic
@@ -15,6 +15,9 @@
 	"filament_max_volumetric_speed": [
 		"6"
 	],
+	"filament_multitool_ramming_flow": [
+		"6"
+	],
 	"filament_type": [
 		"PP-CF"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/Generic
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Generic
@@ -15,6 +15,9 @@
 	"filament_max_volumetric_speed": [
 		"6"
 	],
+	"filament_multitool_ramming_flow": [
+		"6"
+	],
 	"filament_type": [
 		"PP-GF"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/Overture/Overture
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/Overture
@@ -17,6 +17,9 @@
 	"filament_max_volumetric_speed": [
 		"8"
 	],
+	"filament_multitool_ramming_flow": [
+		"8"
+	],
 	"filament_vendor": [
 		"Overture"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/Valment/Valment
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Valment/Valment
@@ -23,6 +23,9 @@
 	"filament_max_volumetric_speed": [
 		"7.5"
 	],
+	"filament_multitool_ramming_flow": [
+		"7.5"
+	],
 	"filament_vendor": [
 		"Valment"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_abs.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_abs.json
@@ -43,6 +43,12 @@
 	"filament_max_volumetric_speed": [
 		"12"
 	],
+	"filament_multitool_ramming_flow": [
+		"15"
+	],
+	"filament_multitool_ramming_volume": [
+		"10"
+	],
 	"filament_type": [
 		"ABS"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_asa.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_asa.json
@@ -43,6 +43,12 @@
 	"filament_max_volumetric_speed": [
 		"12"
 	],
+	"filament_multitool_ramming_flow": [
+		"12"
+	],
+	"filament_multitool_ramming_volume": [
+		"10"
+	],
 	"filament_type": [
 		"ASA"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_bvoh.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_bvoh.json
@@ -41,6 +41,15 @@
 	"filament_max_volumetric_speed": [
 		"8"
 	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"6"
+	],
+	"filament_multitool_ramming_volume": [
+		"0.1"
+	],
 	"filament_type": [
 		"BVOH"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_common.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_common.json
@@ -66,6 +66,12 @@
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
 	],
+	"filament_multitool_ramming": [
+		"1"
+	],
+	"filament_multitool_ramming_volume": [
+		"5"
+	],
 	"filament_retract_before_wipe": [
 		"nil"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_cope.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_cope.json
@@ -41,6 +41,9 @@
 	"filament_max_volumetric_speed": [
 		"16"
 	],
+	"filament_multitool_ramming_flow": [
+		"16"
+	],
 	"filament_scarf_seam_type": [
 		"none"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_eva.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_eva.json
@@ -8,6 +8,9 @@
 	"filament_type": [
 		"EVA"
 	],
+	"filament_multitool_ramming_flow": [
+		"12"
+	],
 	"supertack_plate_temp": [
 		"0"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_hips.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_hips.json
@@ -41,6 +41,9 @@
 	"filament_max_volumetric_speed": [
 		"8"
 	],
+	"filament_multitool_ramming_flow": [
+		"8"
+	],
 	"filament_type": [
 		"HIPS"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pa.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pa.json
@@ -44,6 +44,9 @@
 	"filament_max_volumetric_speed": [
 		"8"
 	],
+	"filament_multitool_ramming_flow": [
+		"12"
+	],
 	"filament_type": [
 		"PA"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_paht.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_paht.json
@@ -7,6 +7,9 @@
 	"filament_max_volumetric_speed": [
 		"12"
 	],
+	"filament_multitool_ramming_flow": [
+		"12"
+	],
 	"filament_type": [
 		"PAHT"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pc.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pc.json
@@ -86,6 +86,9 @@
 	"filament_max_volumetric_speed": [
 		"12"
 	],
+	"filament_multitool_ramming_flow": [
+		"16"
+	],
 	"filament_flow_ratio": [
 		"0.94"
 	]
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pctg.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pctg.json
@@ -26,6 +26,9 @@
 	"filament_max_volumetric_speed": [
 		"12"
 	],
+	"filament_multitool_ramming_flow": [
+		"10"
+	],
 	"filament_type": [
 		"PCTG"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pe.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pe.json
@@ -38,6 +38,9 @@
 	"filament_max_volumetric_speed": [
 		"12"
 	],
+	"filament_multitool_ramming_flow": [
+		"12"
+	],
 	"filament_type": [
 		"PE"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pet.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pet.json
@@ -26,6 +26,9 @@
 	"filament_max_volumetric_speed": [
 		"10"
 	],
+	"filament_multitool_ramming_flow": [
+		"15"
+	],
 	"filament_type": [
 		"PETG"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pha.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pha.json
@@ -38,6 +38,9 @@
 	"filament_max_volumetric_speed": [
 		"6"
 	],
+	"filament_multitool_ramming_flow": [
+		"6"
+	],
 	"filament_type": [
 		"PHA"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pla.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pla.json
@@ -38,6 +38,9 @@
 	"filament_max_volumetric_speed": [
 		"12"
 	],
+	"filament_multitool_ramming_flow": [
+		"20"
+	],
 	"filament_scarf_seam_type": [
 		"none"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pla_silk.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pla_silk.json
@@ -9,6 +9,9 @@
 	"filament_flow_ratio": [
 		"0.98"
 	],
+	"filament_multitool_ramming_flow": [
+		"10"
+	],
 	"slow_down_layer_time": [
 		"8"
 	]
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pp.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pp.json
@@ -38,6 +38,9 @@
 	"filament_max_volumetric_speed": [
 		"12"
 	],
+	"filament_multitool_ramming_flow": [
+		"12"
+	],
 	"filament_type": [
 		"PP"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_ppa.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_ppa.json
@@ -47,6 +47,9 @@
 	"filament_max_volumetric_speed": [
 		"8"
 	],
+	"filament_multitool_ramming_flow": [
+		"8"
+	],
 	"filament_type": [
 		"PPA-CF"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pps.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pps.json
@@ -43,6 +43,9 @@
 	"filament_max_volumetric_speed": [
 		"4"
 	],
+	"filament_multitool_ramming_flow": [
+		"4"
+	],
 	"filament_type": [
 		"PPS"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pva.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pva.json
@@ -40,6 +40,15 @@
 	"filament_max_volumetric_speed": [
 		"12"
 	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"6"
+	],
+	"filament_multitool_ramming_volume": [
+		"0.1"
+	],
 	"filament_soluble": [
 		"1"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_sbs.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_sbs.json
@@ -11,6 +11,9 @@
 	"filament_max_volumetric_speed": [
 		"12"
 	],
+	"filament_multitool_ramming_flow": [
+		"12"
+	],
 	"filament_type": [
 		"SBS"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_tpu.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_tpu.json
@@ -43,6 +43,15 @@
 	"filament_max_volumetric_speed": [
 		"3.2"
 	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"3.2"
+	],
+	"filament_multitool_ramming_volume": [
+		"0.1"
+	],
 	"filament_retraction_length": [
 		"0.4"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/eSUN/eSUN
+++ b/resources/profiles/OrcaFilamentLibrary/filament/eSUN/eSUN
@@ -17,6 +17,9 @@
 	"filament_max_volumetric_speed": [
 		"8"
 	],
+	"filament_multitool_ramming_flow": [
+		"8"
+	],
 	"filament_vendor": [
 		"eSUN"
 	],
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
peachismomo	169189498e	fix regression after merge	2026-08-06 07:56:37 +08:00
peachismomo	72784cfe91	Merge branch 'main' into feat/plugin-pages	2026-08-06 06:16:28 +08:00
peachismomo	ef4815b26c	fix: crash on windows	2026-08-06 06:08:02 +08:00
Alexander Haibl	b97ca3c0ac	disable arc_fitting for K1 potato mcu (#14654 )	2026-08-05 16:25:34 -03:00
Dipl.-Ing. Raoul Rubien, BSc	f73566dd2b	Fixes 1 Technical Debt and 3 Compiler Warnings [-Wclass-memaccess] (#10707 ) * fixes: memcpy(...) writing to an object of type OrientParams with no trivial copy-assignment; use copy-assignment or copy-initialization instead [-Wclass-memaccess] * review result: replaces anonymous namespace with static	2026-08-05 21:45:48 +08:00
Dipl.-Ing. Raoul Rubien, BSc	7fbfb7ba87	Fixes 14 Compiler Warnings [-Wmaybe-uninitialized] (#10778 ) * fixes: may be used uninitialized [-Wmaybe-uninitialized] * fixes: may be used uninitialized [-Wmaybe-uninitialized] * fixes: may be used uninitialized [-Wmaybe-uninitialized] * fixes: may be used uninitialized [-Wmaybe-uninitialized] * reverts {} initializer to = to keep code style consistent	2026-08-05 21:42:15 +08:00
Dipl.-Ing. Raoul Rubien, BSc	23bd320076	Fixes 2 Bugs and 13 Compiler Warnings (#10670 ) * fixes: %g directive writing between 1 and 13 bytes into a region of size between 6 and 18 [-Wformat-overflow=] * fixes: %5s directive writing between 5 and 63 bytes into a region of size 58 [-Wformat-overflow=] * fixes: catching polymorphic type by value [-Wcatch-value=] * fixes: [-Wcomment]; removes whitespaces * increases buffer size from 71B to 90B to avoid potential ovfl.	2026-08-05 21:41:04 +08:00
SoftFever	a10d9e77cf	Make the wipe tower's planner flush and dwell work on Klipper (#15133 ) # Description On Klipper the wipe tower's motion-queue synchronization silently did nothing. Klipper acts on commands the moment it parses them, and its `G4` reads only `P` in milliseconds — it ignores `S` — so the `G4 S0` the tower used to flush the queue before a temperature change never synchronized anything, and the cooling delay after a filament's cooling moves passed instantly instead of waiting. The tower now emits `M400` for the flush and `G4 P<ms>` for the dwell when the flavor is Klipper. Only `gcode_flavor = klipper` is affected; G-code for every other flavor is byte-identical, so no shipped profile or existing project file changes. # Screenshots/Recordings/Graphs <!-- > Please attach relevant screenshots to showcase the UI changes. > Please attach images that can help explain the changes. --> ## Tests <!-- > Please describe the tests that you have conducted to verify the changes made in this PR. --> <!-- > A guide for users on how to download the artifacts from this PR. --> [How to Download Pull Requests Artifacts for Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)	2026-08-05 18:21:05 +08:00
SoftFever	1d023216f2	clean up	2026-08-05 18:09:36 +08:00
SoftFever	dc2796209f	feat: printer agent UI (#15111 ) # Description Changes the device tab to render native wxWidgets UI and route the UI via printer agents. When the flag introduced in #15110 is enabled, the tab bar will show both the native wxWidgets device tab and webview tab under the name device (legacy) This is a prerequisite for implementing the printer agent workflow. <img width="3377" height="1378" alt="image" src="https://github.com/user-attachments/assets/d72b646b-e6c6-4e10-b5d4-fc989debfca8" /> <img width="3377" height="1378" alt="image" src="https://github.com/user-attachments/assets/2356c0f8-bffe-4cd5-bf4d-31f4b5c7706e" /> <!-- > A guide for users on how to download the artifacts from this PR. --> [How to Download Pull Requests Artifacts for Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)	2026-08-05 17:25:23 +08:00
SoftFever	194ef34080	Wait in the wipe tower with a millisecond dwell on Klipper The wipe tower's "Delay after unloading" never happened on Klipper. It was emitted as G4 S<seconds>, and Klipper's G4 reads only the P parameter, in milliseconds, so the pause was silently skipped. The option now produces a dwell Klipper actually performs. Also corrects the planner flush rationale, which cited an extruder position reset that Klipper resolves at parse time and does not need synchronized, and adds end-to-end coverage that slices a two-filament print and checks the emitted wipe tower G-code on both a Klipper and a non-Klipper flavor. No change to any other firmware flavor's output, and no shipped profile sets a non-zero delay, so no shipped profile's output moves either.	2026-08-05 17:15:35 +08:00
SoftFever	4e1caa39eb	Flush the wipe tower planner queue with M400 on Klipper The wipe tower emitted G4 S0 to make the firmware finish its queued moves before commands that must not take effect early. Klipper's G4 reads only the P parameter, so that flush never happened there and a temperature change could land seconds ahead of the moves it was meant to follow. Klipper now gets M400 instead, through one helper shared by both wipe tower implementations. No change to any other firmware flavor's output, so no shipped profile or saved project is affected.	2026-08-05 17:15:35 +08:00
Ian Chua	38f5c84e7f	fix: regression error	2026-08-05 16:20:58 +08:00
Ian Chua	4d8ce0e8a7	Merge branch 'main' into feat/printer-agent-ui	2026-08-05 13:40:20 +08:00
Ian Chua	38cb1ae8d1	Add developer flag for printer agents (#15110 )	2026-08-05 13:40:05 +08:00
Ian Chua	32f82b64e7	fix: enable both device tabs	2026-08-05 13:07:32 +08:00
Ian Chua	e56d7aeb80	Merge branch 'feat/printer-agent-ui' of https://github.com/OrcaSlicer/OrcaSlicer into feat/printer-agent-ui	2026-08-05 13:07:08 +08:00
Ian Chua	4758dc6c68	Merge branch 'main' into feat/printer-agent-ui	2026-08-05 13:06:47 +08:00
Ian Chua	596cbb8b2d	Keep printer-agent error codes available to UI workflow	2026-08-05 11:39:37 +08:00
SoftFever	6312caaf13	Add filament_retract_length_toolchange/filament_retract_restart_extra_toolchange config and update tool changer printer's profiles (#15039 ) * update snapmaker profiles. largely ported for Snapmaker Orca fork * update prime volume * set precise_outer_wall to 1 * Update per-material multi-tool ramming to the filament library * Add per-filament overrides for toolchange retraction * Set toolchange retraction per filament for Snapmaker U1 * set default support type to tree * format snapmaker profiles	2026-08-05 00:13:27 +08:00
Ian Chua	79dcace1ac	Add unsupported-command feedback to the device UI	2026-08-04 21:26:50 +08:00
Andrew	8dfc7a14b9	Gate agent mode behind use_printer_agents toggle Replace per-printer auto-activation (is_current_printer_agent_plugin) with a global experimental AppConfig toggle, default off: legacy print-host behavior is unchanged until the user opts in. The toggle drives device-tab routing, print button defaults, connect-button visibility and sidebar layout, and dedups machine-select dialog opens.	2026-08-04 18:12:11 +08:00
Andrew	1534268183	Reset device selection on agent swap or unload (#124 ) set_live_printer_agent centralizes the swap: deselect the machine, clear stale sidebar state and the previous agent's Other Devices, then install the new agent (or null when its provider vanished). Plugin load/unload callbacks refresh the dropdown and re-run agent selection. load_last_machine no longer falls back to the first available machine.	2026-08-04 18:12:11 +08:00
Andrew	501af81ba9	Replace fake-enum printer agent dropdown (#121 ) A dedicated PrinterAgentChoice field reads rows straight from the live agent registry and stores the agent id string, replacing the fake-coEnum index mapping. The field moves to TabPrinter and registers with the searcher so UnsavedChanges renders it; the PhysicalPrinterDialog copy and its update hook are removed (#125). switch_printer_agent now resolves ids via resolve_printer_agent_id.	2026-08-04 18:12:10 +08:00
Ian Chua	16c44940d2	Add developer flag for printer agents	2026-08-04 18:12:10 +08:00
Ian Chua	acb0be6ed9	Merge branch 'feat/plugin-pages' of https://github.com/OrcaSlicer/OrcaSlicer into feat/plugin-pages	2026-07-30 01:55:12 +08:00
Ian Chua	14b05a4d8e	fix: regression after merge	2026-07-30 01:54:46 +08:00
Ian Chua	71c4eebfc9	Merge branch 'main' into feat/plugin-pages	2026-07-29 19:42:04 +08:00
Ian Chua	00f558aa18	Merge branch 'main' into feat/plugin-pages	2026-07-29 19:40:40 +08:00
Ian Chua	3145f28bb7	feat: support tab icons	2026-07-29 19:37:17 +08:00
Ian Chua	e00906a833	feat: plugin pages	2026-07-28 19:17:26 +08:00
Ian Chua	56c28fc102	feat: refactor notebook/tabs to be string based instead of fixed index based	2026-07-28 19:17:05 +08:00