Demo

* fix: crash in Measure tool when a plain edge is the first selection

The SPHERE_2 gripper raycaster called get_feature_offset() on
.first.feature instead of .second.feature (copy-pasted from the SPHERE_1
block). Plain planar-border edges store no extra point, so the Edge
branch dereferenced an empty optional behind a release-stripped assert,
aborting on Flatpak and undefined behavior elsewhere.

Point the SPHERE_2 raycaster at .second.feature and fall the Edge branch
back to the edge midpoint.

Fixes #14018

.github/workflows/auto-close-duplicates.yml

@@ -15,7 +15,7 @@ jobs:
 
     steps:
       - name: Checkout repository
-        uses: actions/checkout@v6
+        uses: actions/checkout@v7
 
       - name: Setup Bun
         uses: oven-sh/setup-bun@v2

.github/workflows/backfill-duplicate-comments.yml

@@ -29,7 +29,7 @@ jobs:
 
     steps:
       - name: Checkout repository
-        uses: actions/checkout@v6
+        uses: actions/checkout@v7
       
       - name: Setup Bun
         uses: oven-sh/setup-bun@v2

.github/workflows/build_all.yml

@@ -131,7 +131,7 @@ jobs:
     if: ${{ !cancelled() && success() }}
     steps:
       - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v7
         with:
           sparse-checkout: |
             .github
@@ -204,7 +204,7 @@ jobs:
     - name: "Remove unneeded stuff to free disk space"
       run:
         rm -rf /usr/local/lib/android/* /usr/share/dotnet/* /opt/ghc1/* "/usr/local/share/boost1/*" /opt/hostedtoolcache1/*
-    - uses: actions/checkout@v6
+    - uses: actions/checkout@v7
     - name: Get the version and date
       run: |
         ver_pure=$(grep 'set(SoftFever_VERSION' version.inc | cut -d '"' -f2)
@@ -223,14 +223,14 @@ jobs:
     # Manage flatpak-builder cache externally so PRs restore but never upload
     - name: Restore flatpak-builder cache
       if: github.event_name == 'pull_request'
-      uses: actions/cache/restore@v5
+      uses: actions/cache/restore@v6
       with:
         path: .flatpak-builder
         key: flatpak-builder-${{ matrix.variant.arch }}-${{ github.event.pull_request.base.sha }}
         restore-keys: flatpak-builder-${{ matrix.variant.arch }}-
     - name: Save/restore flatpak-builder cache
       if: github.event_name != 'pull_request'
-      uses: actions/cache@v5
+      uses: actions/cache@v6
       with:
         path: .flatpak-builder
         key: flatpak-builder-${{ matrix.variant.arch }}-${{ github.sha }}

.github/workflows/build_check_cache.yml

@@ -26,7 +26,7 @@ jobs:
       valid-cache: ${{ steps.cache_deps.outputs.cache-hit }}
     steps:
       - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v7
         with:
           lfs: 'false'
         
@@ -46,7 +46,7 @@ jobs:
             
       - name: load cache
         id: cache_deps
-        uses: actions/cache@v5
+        uses: actions/cache@v6
         with:
           path: ${{ steps.set_outputs.outputs.cache-path }}
           key: ${{ steps.set_outputs.outputs.cache-key }}

.github/workflows/build_deps.yml

@@ -34,12 +34,12 @@ jobs:
 
       # Setup the environment
       - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v7
         with:
           lfs: 'false'
 
       - name: load cached deps
-        uses: actions/cache@v5
+        uses: actions/cache@v6
         with:
           path: ${{ inputs.cache-path }}
           key: ${{ inputs.cache-key }}

.github/workflows/build_orca.yml

@@ -37,13 +37,13 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v7
         with:
           lfs: 'false'
 
       - name: load cached deps
         if: ${{ !(runner.os == 'macOS' && inputs.macos-combine-only) }}
-        uses: actions/cache@v5
+        uses: actions/cache@v6
         with:
           path: ${{ inputs.cache-path }}
           key: ${{ inputs.cache-key }}
@@ -144,15 +144,6 @@ jobs:
         run: |
           ./build_release_macos.sh -s -n -x ${{ !vars.SELF_HOSTED && '-1' || '' }} -a ${{ inputs.arch }} -t 10.15
 
-      - name: Generate system presets cache (macOS)
-        if: runner.os == 'macOS' && !inputs.macos-combine-only
-        working-directory: ${{ github.workspace }}
-        shell: bash
-        run: |
-          tool=$(find build/${{ inputs.arch }} -name generate_system_cache -type f | head -1)
-          profiles=$(find build/${{ inputs.arch }} -path "*/Resources/profiles" -type d | head -1)
-          "$tool" --path "$profiles" --log_level 2
-
       - name: Pack macOS app bundle ${{ inputs.arch }}
         if: runner.os == 'macOS' && !inputs.macos-combine-only
         working-directory: ${{ github.workspace }}
@@ -349,23 +340,6 @@ jobs:
           if ($arch -eq "arm64") { .\build_release_vs.bat slicer arm64 } else { .\build_release_vs.bat slicer }
         shell: pwsh
 
-      - name: Generate system presets cache (Windows)
-        if: runner.os == 'Windows'
-        shell: pwsh
-        run: |
-          $buildDir = $env:BUILD_DIR
-          $tool = Get-ChildItem -Recurse -Path $buildDir -Filter "generate_system_cache.exe" | Select-Object -First 1
-          if (-not $tool) { Write-Error "generate_system_cache.exe not found in $buildDir"; exit 1 }
-          $profiles = Get-ChildItem -Recurse -Path $buildDir -Directory -Filter profiles |
-            Where-Object { $_.FullName -match 'resources' } | Select-Object -First 1
-          if (-not $profiles) { Write-Error "profiles directory not found in $buildDir"; exit 1 }
-          # Add the slicer's runtime DLL directory to PATH so generate_system_cache.exe
-          # can resolve its dependencies (TKernel.dll etc.) without a full install step.
-          $dll_dir = Get-ChildItem -Recurse -Path $buildDir -Filter "TKernel.dll" |
-            Select-Object -First 1 | Select-Object -ExpandProperty DirectoryName
-          if ($dll_dir) { $env:PATH = "$dll_dir;$env:PATH" }
-          & $tool.FullName --path $profiles.FullName --log_level 2
-
       # NSIS is x86-only; it runs (and the installer it emits runs) under ARM64's
       # x86 emulation, packaging the native arm64 payload from build-arm64.
       - name: Create installer Win
@@ -503,22 +477,6 @@ jobs:
           retention-days: 5
           if-no-files-found: error
 
-      - name: Generate system presets cache (Linux)
-        if: runner.os == 'Linux'
-        shell: bash
-        run: |
-          tool=$(find build -name generate_system_cache -type f | head -1)
-          if [ -z "$tool" ]; then echo "ERROR: generate_system_cache not found in build tree" >&2; exit 1; fi
-          "$tool" --path build/package/resources/profiles --log_level 2
-          # Re-pack the AppImage so the per-vendor caches are included
-          appimage=$(find build -maxdepth 1 -name "OrcaSlicer_Linux_AppImage*.AppImage" | head -1)
-          chmod +x "$appimage"
-          "$appimage" --appimage-extract
-          cp build/package/resources/profiles/*.cache squashfs-root/resources/profiles/
-          appimagetool=$(find build -name "appimagetool.AppImage" | head -1)
-          ARCH=$(uname -m) "$appimagetool" --appimage-extract-and-run squashfs-root "$appimage"
-          rm -rf squashfs-root
-
       - name: Run external slicer regression tests
         if: runner.os == 'Linux' && inputs.arch != 'aarch64'
         timeout-minutes: 20

.github/workflows/check_locale.yml

@@ -14,7 +14,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:  
       - name: Checkout repository
-        uses: actions/checkout@v6
+        uses: actions/checkout@v7
 
       - name: Install gettext 
         run: |

.github/workflows/check_profiles.yml

@@ -24,7 +24,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout repository
-        uses: actions/checkout@v6
+        uses: actions/checkout@v7
 
       - name: Run extra JSON check
         id: extra_json_check
@@ -57,17 +57,121 @@ jobs:
           set +e
           ./OrcaSlicer_profile_validator -p ${{ github.workspace }}/resources/profiles -l 2 -v BBL -f 2>&1 | tee ${{ runner.temp }}/validate_filament_subtypes.log
           exit ${PIPESTATUS[0]}
+      # Flag inherits/compatible_printers/compatible_prints references that point at a deleted or
+      # renamed preset. Opt-in per vendor for now (via -r); enabled for BBL and Qidi until other
+      # vendors' profiles are cleaned up. Runs before the custom-preset injection below.
+      - name: validate preset references for BBL and Qidi profiles
+        id: validate_preset_references
+        continue-on-error: true
+        run: |
+          set +e
+          rc=0
+          for v in BBL Qidi; do
+            ./OrcaSlicer_profile_validator -p ${{ github.workspace }}/resources/profiles -l 2 -v "$v" -r 2>&1 | tee -a ${{ runner.temp }}/validate_preset_references.log
+            [ ${PIPESTATUS[0]} -ne 0 ] && rc=1
+          done
+          exit $rc
 
       - name: validate custom presets
         id: validate_custom
         continue-on-error: true
         working-directory: ${{ github.workspace }}
         run: |
-          set +e
-          curl -LJO https://github.com/OrcaSlicer/OrcaSlicer/releases/download/nightly-builds/orca_custom_preset_tests.zip
-          unzip -q ./orca_custom_preset_tests.zip -d ${{ github.workspace }}/resources/profiles
-          ./OrcaSlicer_profile_validator -p ${{ github.workspace }}/resources/profiles -l 2 2>&1 | tee ${{ runner.temp }}/validate_custom.log
-          exit ${PIPESTATUS[0]}
+          fixtures_dir="${{ runner.temp }}/profile-fixtures"
+          output_dir="${{ runner.temp }}/custom-preset-validation"
+          combined_log="${{ runner.temp }}/validate_custom.log"
+          summary="${output_dir}/summary.md"
+          release_url="https://github.com/OrcaSlicer/OrcaSlicer-profile-validator/releases/download/fixture-archive"
+
+          rm -rf "${fixtures_dir}" "${output_dir}"
+          mkdir -p "${fixtures_dir}" "${output_dir}"
+
+          curl -fsSL -o "${fixtures_dir}/manifest.json" "${release_url}/manifest.json"
+
+          MANIFEST_PATH="${fixtures_dir}/manifest.json" python3 <<'PY' > "${fixtures_dir}/fixtures.tsv"
+          import json
+          import os
+
+          with open(os.environ["MANIFEST_PATH"], encoding="utf-8") as fh:
+              manifest = json.load(fh)
+
+          if isinstance(manifest, dict):
+              entries = manifest.get("fixtures", [])
+          else:
+              entries = manifest
+
+          for entry in entries:
+              version = entry.get("version", "")
+              asset = entry.get("asset", "")
+              sha256 = entry.get("asset_sha256", "")
+              if not version or not asset:
+                  continue
+              print(f"{version}\t{asset}\t{sha256}")
+          PY
+
+          if [ ! -s "${fixtures_dir}/fixtures.tsv" ]; then
+            echo "No custom preset fixtures found in ${release_url}/manifest.json" | tee "${combined_log}"
+            exit 1
+          fi
+
+          {
+            echo "## Custom Preset Fixture Validation"
+            echo ""
+            echo "| Version | Status | Log |"
+            echo "| --- | --- | --- |"
+          } > "${summary}"
+
+          status=0
+          failed_logs=()
+
+          while IFS=$'\t' read -r version asset expected_sha256; do
+            fixture_zip="${fixtures_dir}/${asset}"
+            asset_url_name="$(python3 -c 'import sys, urllib.parse; print(urllib.parse.quote(sys.argv[1], safe=""))' "${asset}")"
+            profile_tree="${output_dir}/profiles-${version}"
+            log_path="${output_dir}/${version}.log"
+
+            curl -fsSL -o "${fixture_zip}" "${release_url}/${asset_url_name}"
+
+            if [ -n "${expected_sha256}" ] && [ "${expected_sha256}" != "<sha256>" ]; then
+              echo "${expected_sha256}  ${fixture_zip}" | sha256sum -c -
+            fi
+
+            rm -rf "${profile_tree}"
+            mkdir -p "${profile_tree}"
+            cp -a "${{ github.workspace }}/resources/profiles/." "${profile_tree}/"
+            rm -rf "${profile_tree}/user"
+            unzip -q "${fixture_zip}" -d "${profile_tree}"
+
+            set +e
+            ./OrcaSlicer_profile_validator -p "${profile_tree}" -l 2 > "${log_path}" 2>&1
+            result=$?
+            set -e
+
+            if [ "${result}" -eq 0 ]; then
+              echo "| ${version} | PASS | ${version}.log |" >> "${summary}"
+            else
+              echo "| ${version} | FAIL | ${version}.log |" >> "${summary}"
+              failed_logs+=("${log_path}")
+              status=1
+            fi
+          done < "${fixtures_dir}/fixtures.tsv"
+
+          {
+            cat "${summary}"
+            if [ "${#failed_logs[@]}" -gt 0 ]; then
+              echo ""
+              echo "## Failed Fixture Logs"
+              for log_path in "${failed_logs[@]}"; do
+                echo ""
+                echo "### $(basename "${log_path}" .log)"
+                echo '```'
+                head -c 12000 "${log_path}" || echo "No output captured"
+                echo '```'
+              done
+            fi
+          } | tee "${combined_log}"
+
+          exit "${status}"
 
       - name: Prepare PR number for comment workflow
         if: ${{ always() && github.event_name == 'pull_request' }}
@@ -76,7 +180,7 @@ jobs:
           echo "${{ github.event.pull_request.number }}" > ${{ runner.temp }}/profile-check-results/pr_number.txt
 
       - name: Prepare comment artifact
-        if: ${{ always() && github.event_name == 'pull_request' && (steps.extra_json_check.outcome == 'failure' || steps.validate_system.outcome == 'failure' || steps.validate_filament_subtypes.outcome == 'failure' || steps.validate_custom.outcome == 'failure') }}
+        if: ${{ always() && github.event_name == 'pull_request' && (steps.extra_json_check.outcome == 'failure' || steps.validate_system.outcome == 'failure' || steps.validate_filament_subtypes.outcome == 'failure' || steps.validate_preset_references.outcome == 'failure' || steps.validate_custom.outcome == 'failure') }}
         run: |
           {
             # Marker matched by check_profiles_comment.yml to delete prior comments.
@@ -111,6 +215,15 @@ jobs:
               echo ""
             fi
 
+            if [ "${{ steps.validate_preset_references.outcome }}" = "failure" ]; then
+              echo "### BBL/Qidi Preset Reference Validation Failed"
+              echo ""
+              echo '```'
+              head -c 30000 ${{ runner.temp }}/validate_preset_references.log || echo "No output captured"
+              echo '```'
+              echo ""
+            fi
+
             if [ "${{ steps.validate_custom.outcome }}" = "failure" ]; then
               echo "### Custom Preset Validation Failed"
               echo ""
@@ -133,7 +246,7 @@ jobs:
           retention-days: 1
 
       - name: Fail if any check failed
-        if: ${{ always() && (steps.extra_json_check.outcome == 'failure' || steps.validate_system.outcome == 'failure' || steps.validate_filament_subtypes.outcome == 'failure' || steps.validate_custom.outcome == 'failure') }}
+        if: ${{ always() && (steps.extra_json_check.outcome == 'failure' || steps.validate_system.outcome == 'failure' || steps.validate_filament_subtypes.outcome == 'failure' || steps.validate_preset_references.outcome == 'failure' || steps.validate_custom.outcome == 'failure') }}
         run: |
           echo "One or more profile checks failed. See above for details."
           exit 1

.github/workflows/dedupe-issues.yml

@@ -20,7 +20,7 @@ jobs:
 
     steps:
       - name: Checkout repository
-        uses: actions/checkout@v6
+        uses: actions/checkout@v7
 
       - name: Run Claude Code slash command
         uses: anthropics/claude-code-base-action@beta

.github/workflows/doxygen-docs.yml

@@ -26,7 +26,7 @@ jobs:
           remove-existing-swap-files: true
 
       - name: Checkout repository
-        uses: actions/checkout@v6
+        uses: actions/checkout@v7
 
       - name: Install Doxygen and Graphviz
         run: |

.github/workflows/shellcheck.yml

@@ -21,7 +21,7 @@ jobs:
     steps:
       - name: Cache shellcheck download
         id: cache-shellcheck-v0_11
-        uses: actions/cache@v5
+        uses: actions/cache@v6
         with:
           path: ~/shellcheck
           key: ${{ runner.os }}-shellcheck-v0_11
@@ -36,7 +36,7 @@ jobs:
           tar -xvf ~/sc.tar.xz -C ~
           mv ~/shellcheck-"${INPUT_VERSION}"/shellcheck ~/shellcheck
 
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v7
         with:
           fetch-depth: 1
 

.github/workflows/update-translation.yml

@@ -10,7 +10,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:  
       - name: Checkout repository
-        uses: actions/checkout@v6
+        uses: actions/checkout@v7
 
       - name: Setup Python
         uses: actions/setup-python@v6

README.md

@@ -1,237 +1 @@
-<div align="center">
-
-<picture>
-  <img alt="OrcaSlicer logo" src="resources/images/OrcaSlicer.png" width="15%" height="15%">
-</picture>
-
-<a href="https://trendshift.io/repositories/15552" target="_blank"><img src="https://trendshift.io/api/badge/repositories/15552" alt="OrcaSlicer%2FOrcaSlicer | Trendshift" style="width: 250px; height: 55px;" width="250" height="55"/></a>
-
-[![GitHub Repo stars](https://img.shields.io/github/stars/OrcaSlicer/OrcaSlicer)](https://github.com/OrcaSlicer/OrcaSlicer/stargazers) [![Build all](https://github.com/OrcaSlicer/OrcaSlicer/actions/workflows/build_all.yml/badge.svg?branch=main)](https://github.com/OrcaSlicer/OrcaSlicer/actions/workflows/build_all.yml)
-
-OrcaSlicer: an open source Next-Gen Slicing Software for Precision 3D Prints.  
-Optimize your prints with ultra-fast slicing, intelligent support generation, and seamless printer compatibility—engineered for perfection.
-<h3>
-
-# Official links and community
-
-#### Official Website:
-
-<a href="https://www.orcaslicer.com/" style="font-size:2em;">OrcaSlicer.com</a>
-
-#### Github Repository:
-
-<a href="https://github.com/OrcaSlicer/OrcaSlicer"><img src="https://img.shields.io/badge/OrcaSlicer-181717?style=flat&logo=github&logoColor=white" width="200" alt="GitHub Logo"/> </a>
-
-#### Follow us:
-
-<a href="https://twitter.com/real_OrcaSlicer"><img src="https://img.shields.io/badge/real__OrcaSlicer-000000?style=flat&logo=x&logoColor=white" width="200" alt="X Logo"/> </a>  
-<a href="https://www.youtube.com/@OfficialOrcaSlicer"><img src="https://img.shields.io/badge/OfficialOrcaSlicer-FF0000?style=flat&logo=youtube&logoColor=white" width="200" alt="YouTube Logo"/> </a>
-
-#### Join our Discord community:
-
-<a href="https://discord.gg/P4VE9UY9gJ"><img src="https://img.shields.io/badge/-Discord-5865F2?style=flat&logo=discord&logoColor=fff" width="200" alt="discord logo"/> </a>
-
-<table border="2" style="border-color: #ffa500; background-color:rgb(232, 220, 180); color: #856404;">
-<tr>
-<td>
-<strong>⚠️ CAUTION:</strong><br>
-Several clickbait and malicious websites, such as <b>orca-slicer[.]com</b> and <b>orcaslicer[.]net</b>, are pretending to be the official OrcaSlicer site. These sites may redirect you to dangerous downloads or contain misleading information.<br>
-<b>Our only official website is <a href="https://www.orcaslicer.com/">www.orcaslicer.com</a>.</b><br><br>
-If you come across any of these in search results, please <b>report them</b> as unsafe or phishing to help keep the community secure with:<br>
- - <a href="https://safebrowsing.google.com/safebrowsing/report_phish/">Google Safe Browsing</a><br>
- - <a href="https://www.microsoft.com/en-us/wdsi/support/report-unsafe-site">Microsoft Security Intelligence</a><br>
- - <a href="https://ipthreat.net/tools/reportphishing">IPThreat</a>
-</td>
-</tr>
-</table>
-
-</div>
-
-# Main features
-
-- **[Advanced Calibration Tools](https://www.orcaslicer.com/wiki/calibration_guide)**  
-  Comprehensive suite: temperature towers, flow rate, retraction & more for optimal performance.
-- **[Precise Wall](https://www.orcaslicer.com/wiki/quality_settings_precision#precise-wall) and [Seam Control](https://www.orcaslicer.com/wiki/quality_settings_seam)**  
-  Adjust outer wall spacing and apply scarf seams to enhance print accuracy.
-- **[Sandwich Mode](https://www.orcaslicer.com/wiki/quality_settings_wall_and_surfaces#innerouterinner) and [Polyholes](https://www.orcaslicer.com/wiki/quality_settings_precision#polyholes) Support**  
-  Use varied infill [patterns](https://www.orcaslicer.com/wiki/strength_settings_patterns) and accurate hole shapes for improved clarity.
-- **[Overhang](https://www.orcaslicer.com/wiki/quality_settings_overhangs) and [Support Optimization](https://www.orcaslicer.com/wiki#support-settings)**  
-  Modify geometry for printable overhangs with precise support placement.
-- **[Granular Controls and Customization](https://www.orcaslicer.com/wiki#process-settings)**  
-  Fine-tune print speed, layer height, pressure, and temperature with precision.
-- **Network Printer Support**  
-  Seamless integration with Klipper, PrusaLink, and OctoPrint for remote control.
-- **[Mouse Ear Brims](https://www.orcaslicer.com/wiki/others_settings_brim) & [Adaptive Bed Mesh](https://www.orcaslicer.com/wiki/printer_basic_information_adaptive_bed_mesh)**  
-  Automatic brims and adaptive mesh calibration ensure consistent adhesion.
-- **User-Friendly Interface**  
-  Intuitive drag-and-drop design with pre-made profiles for popular printers.
-- **[Open-Source](https://github.com/OrcaSlicer/OrcaSlicer) & [Community Driven](https://discord.gg/P4VE9UY9gJ)**  
-  Regular updates fueled by continuous community contributions.
-- **Wide Printer Compatibility**  
-  Supports a broad range of printers: Bambu Lab, Prusa, Creality, Voron, and more.
-- Additional features can be found in the [change notes](https://github.com/OrcaSlicer/OrcaSlicer/releases/).
-
-# Wiki
-
-The [wiki](https://www.orcaslicer.com/wiki) aims to provide a detailed explanation of the slicer settings, including how to maximize their use and how to calibrate and set up your printer.
-
-- **[Access the wiki here](https://www.orcaslicer.com/wiki)**
-- **[Contribute to the wiki](https://www.orcaslicer.com/wiki/how_to_wiki)**
-
-# Download
-
-## Stable Release
-
-📥 **[Download the Latest Stable Release](https://github.com/OrcaSlicer/OrcaSlicer/releases/latest)**  
-Visit our GitHub Releases page for the latest stable version of OrcaSlicer, recommended for most users.
-
-## Nightly Builds
-
-🌙 **[Download the Latest Nightly Build](https://github.com/OrcaSlicer/OrcaSlicer/releases/tag/nightly-builds)**  
-Explore the latest developments in OrcaSlicer with our nightly builds. Feedback on these versions is highly appreciated.
-
-# How to install
-
-## Windows
-
-Download the **Windows Installer exe**  for your preferred version from the [releases page](https://github.com/OrcaSlicer/OrcaSlicer/releases).
-
-- *For convenience there is also a portable build available.*
-    <details>
-    <summary>Troubleshooting</summary>
-
-  - *If you have troubles to run the build, you might need to install following runtimes:*
-  - [MicrosoftEdgeWebView2RuntimeInstallerX64](https://github.com/OrcaSlicer/OrcaSlicer/releases/download/v1.0.10-sf2/MicrosoftEdgeWebView2RuntimeInstallerX64.exe)
-    - [Details of this runtime](https://aka.ms/webview2)
-    - [Alternative Download Link Hosted by Microsoft](https://go.microsoft.com/fwlink/p/?LinkId=2124703)
-  - [vcredist2019_x64](https://github.com/OrcaSlicer/OrcaSlicer/releases/download/v1.0.10-sf2/vcredist2019_x64.exe)
-    - [Alternative Download Link Hosted by Microsoft](https://aka.ms/vs/17/release/vc_redist.x64.exe)
-    - This file may already be available on your computer if you've installed visual studio.  Check the following location: `%VCINSTALLDIR%Redist\MSVC\v142`
-    </details>
-
-Windows Package Manager
-
-```shell
-winget install --id=SoftFever.OrcaSlicer -e
-```
-
-## Mac
-
-1. Download the DMG for your computer: `arm64` version for Apple Silicon and `x86_64` for Intel CPU.
-2. Drag OrcaSlicer.app to Application folder.
-3. *If you want to run a build from a PR, you also need to follow the instructions below:*
-
-    <details>
-    <summary>Quarantine</summary>
-
-    - Option 1 (You only need to do this once. After that the app can be opened normally.):
-      - Step 1: Hold _cmd_ and right click the app, from the context menu choose **Open**.
-      - Step 2: A warning window will pop up, click _Open_
-
-    - Option 2:
-      Execute this command in terminal:
-
-      ```shell
-      xattr -dr com.apple.quarantine /Applications/OrcaSlicer.app
-      ```
-
-    - Option 3:
-        - Step 1: open the app, a warning window will pop up  
-            ![mac_cant_open](./SoftFever_doc/mac_cant_open.png)
-        - Step 2: in `System Settings` -> `Privacy & Security`, click `Open Anyway`:  
-            ![mac_security_setting](./SoftFever_doc/mac_security_setting.png)
-    </details>
-
-## Linux
-
-### Flathub (Recommended)
-
-OrcaSlicer is available through FlatHub:
-
-<a href='https://flathub.org/apps/com.orcaslicer.OrcaSlicer'><img width='240' alt='Download on Flathub' src='https://dl.flathub.org/assets/badges/flathub-badge-en.png'/></a>
-
-Install from the command line:
-
-```shell
-flatpak install flathub com.orcaslicer.OrcaSlicer
-flatpak run com.orcaslicer.OrcaSlicer
-```
-
-It can also be installed through graphical software managers (KDE Discover, GNOME Software, etc.) when Flathub is enabled. Search for **OrcaSlicer** in your software center.
-
-### AppImage
-
-AppImages are published for both **x86_64** and **aarch64** (ARM64). Pick the file matching your CPU — the ARM64 build has `aarch64` in its name (e.g. `OrcaSlicer_Linux_AppImage_Ubuntu2404_aarch64_*.AppImage`).
-
- 1. Download App image from the [releases page](https://github.com/OrcaSlicer/OrcaSlicer/releases).
- 2. Double click the downloaded file to run it.
-
- 3. If you run into trouble executing it, try this command in the terminal:
-    `chmod +x /path_to_appimage/OrcaSlicer_Linux.AppImage`
-
-# How to Compile
-
-All updated build instructions for Windows, macOS, and Linux are now available on the official [OrcaSlicer Wiki - How to build](https://www.orcaslicer.com/wiki/how_to_build) page.
-
-Please refer to the wiki to ensure you're following the latest and most accurate steps for your platform.
-
-# Klipper Note
-
-If you're running Klipper, it's recommended to add the following configuration to your `printer.cfg` file.
-
-```gcode
-# Enable object exclusion
-[exclude_object]
-
-# Enable arcs support
-[gcode_arcs]
-resolution: 0.1
-```
-
-# Supports
-
-**OrcaSlicer** is an open-source project and I'm deeply grateful to all my sponsors and backers.  
-Their generous support enables me to purchase filaments and other essential 3D printing materials for the project.  
-Thank you! :)
-
-## Sponsors
-
-<table>
-<tr>
-<td>
-<a href="https://qidi3d.com/" style="display:inline-block; border-radius:8px; background:#fff;">
-  <img src="SoftFever_doc\sponsor_logos\QIDI.png" alt="QIDI" width="100" height="100">
-</a>
-</td>
-<td>
-<a href="https://bigtree-tech.com/" style="display:inline-block; border-radius:8px; background:#222;">
-    <img src="SoftFever_doc\sponsor_logos\BigTreeTech.png" alt="BIGTREE TECH" width="100" height="100">
-</a>
-</td>
-</tr>
-</table>
-
-## Backers:
-
-**Ko-fi supporters** ☕: [Backers list](https://github.com/user-attachments/files/16147016/Supporters_638561417699952499.csv)
-
-## Support me
-
-<a href="https://github.com/sponsors/SoftFever"><img src="https://img.shields.io/badge/GitHub%20Sponsors-30363D?style=flat&logo=GitHub-Sponsors&logoColor=EA4AAA" height="50"></a>  
-<a href="https://ko-fi.com/G2G5IP3CP"><img src="https://img.shields.io/badge/Support_me_on_Ko--fi-FF5E5B?style=flat&logo=ko-fi&logoColor=white" height="50"></a>  
-<a href="https://paypal.me/softfever3d"><img src="https://img.shields.io/badge/PayPal-003087?style=flat&logo=paypal&logoColor=fff" height="50"></a>
-
-## Some Background
-
-Open-source slicing has always been built on a tradition of collaboration and attribution. [Slic3r](https://github.com/Slic3r/Slic3r), created by Alessandro Ranellucci and the RepRap community, laid the foundation. [PrusaSlicer](https://github.com/prusa3d/PrusaSlicer) by Prusa Research built on Slic3r and acknowledged that heritage. [Bambu Studio](https://github.com/bambulab/BambuStudio) in turn forked from PrusaSlicer, and [SuperSlicer](https://github.com/supermerill/SuperSlicer) by @supermerill extended PrusaSlicer with community-driven enhancements. Each project carried the work of its predecessors forward, crediting those who came before.
-
-OrcaSlicer began in that same spirit, drawing from BambuStudio, PrusaSlicer, and ideas inspired by CuraSlicer and SuperSlicer. But it has since grown far beyond its origins. Through relentless innovation — introducing advanced calibration tools, precise wall and seam control, tree supports, adaptive slicing, and hundreds of other features — OrcaSlicer has become the most widely used and actively developed open-source slicer in the 3D printing community. Many of its innovations have been adopted by other slicers, making it a driving force for the entire industry.
-
-The OrcaSlicer logo was designed by community member [Justin Levine](https://github.com/jal-co).
-
-# License
-
-- **OrcaSlicer** is licensed under the GNU Affero General Public License, version 3.
-- The **GNU Affero General Public License**, version 3 ensures that if you use any part of this software in any way (even behind a web server), your software must be released under the same license.
-- OrcaSlicer includes a **pressure advance calibration pattern test** adapted from Andrew Ellis' generator, which is licensed under GNU General Public License, version 3. Ellis' generator is itself adapted from a generator developed by Sineos for Marlin, which is licensed under GNU General Public License, version 3.
-- The **Bambu networking plugin** is based on non-free libraries from BambuLab. It is optional to the OrcaSlicer and provides extended functionalities for Bambulab printer users.
+Remove this branch and PR later

build_linux.sh

@@ -567,8 +567,6 @@ if [[ -n "${BUILD_ORCA}" ]] || [[ -n "${BUILD_TESTS}" ]] ; then
 	print_and_run cmake --build $BUILD_DIR --config "${BUILD_CONFIG}" --target OrcaSlicer
 	echo "Building OrcaSlicer_profile_validator .."
 	print_and_run cmake --build $BUILD_DIR --config "${BUILD_CONFIG}" --target OrcaSlicer_profile_validator
-	echo "Building generate_system_cache ..."
-	print_and_run cmake --build $BUILD_DIR --config "${BUILD_CONFIG}" --target generate_system_cache
 	./scripts/run_gettext.sh
     fi
     if [[ -n "${BUILD_TESTS}" ]] ; then

resources/profiles/Anker/process/0.20mm Optimal 0.6 nozzle @Anker.json

@@ -1,6 +1,7 @@
 {
 	"type": "process",
 	"name": "0.20mm Optimal 0.6 nozzle @Anker",
+	"renamed_from": "0.20mm Optimal 0.6 nozzle @Anker.json",
 	"inherits": "fdm_process_anker_common_0_6",
 	"from": "system",
 	"setting_id": "re5qmcOFJ1OJP3Ip",

resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1C.json

@@ -1,6 +1,7 @@
 {
 	"type": "filament",
 	"name": "Bambu PLA Tough @BBL X1C",
+	"renamed_from": "Bambu PLA Impact @BBL X1C",
 	"inherits": "Bambu PLA Tough @base",
 	"from": "system",
 	"setting_id": "GFSA09_02",

resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL A1.json

@@ -1,6 +1,7 @@
 {
 	"type": "filament",
 	"name": "Panchroma PLA Satin @BBL A1",
+	"renamed_from": "Panchroma PLA Stain @BBL A1",
 	"inherits": "Panchroma PLA Satin @base",
 	"from": "system",
 	"setting_id": "GFSPM005_00",

resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL A1M.json

@@ -1,6 +1,7 @@
 {
 	"type": "filament",
 	"name": "Panchroma PLA Satin @BBL A1M",
+	"renamed_from": "Panchroma PLA Stain @BBL A1M",
 	"inherits": "Panchroma PLA Satin @base",
 	"from": "system",
 	"setting_id": "GFSPM005_02",

resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL P1P.json

@@ -1,6 +1,7 @@
 {
 	"type": "filament",
 	"name": "Panchroma PLA Satin @BBL P1P",
+	"renamed_from": "Panchroma PLA Stain @BBL P1P",
 	"inherits": "Panchroma PLA Satin @base",
 	"from": "system",
 	"setting_id": "GFSPM005_04",

resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL X1.json

@@ -1,6 +1,7 @@
 {
 	"type": "filament",
 	"name": "Panchroma PLA Satin @BBL X1",
+	"renamed_from": "Panchroma PLA Stain @BBL X1",
 	"inherits": "Panchroma PLA Satin @base",
 	"from": "system",
 	"setting_id": "GFSPM005_06",

resources/profiles/BBL/process/0.20mm Standard @BBL X1C.json

@@ -1,6 +1,7 @@
 {
 	"type": "process",
 	"name": "0.20mm Standard @BBL X1C",
+	"renamed_from": "0.20mm Bambu Support W @BBL X1C",
 	"inherits": "fdm_process_single_0.20",
 	"from": "system",
 	"setting_id": "GP004",

resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.4.json

@@ -1,6 +1,7 @@
 {
 	"type": "process",
 	"name": "0.12mm Fine @Creality Ender3V3SE 0.4",
+	"renamed_from": "0.12mm Fine @Creality Ender3V3SE",
 	"inherits": "fdm_process_creality_common",
 	"from": "system",
 	"setting_id": "W68mSPdmat2rCXuD",

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.4.json

@@ -1,6 +1,7 @@
 {
 	"type": "process",
 	"name": "0.16mm Optimal @Creality Ender3V3SE 0.4",
+	"renamed_from": "0.16mm Optimal @Creality Ender3V3SE",
 	"inherits": "fdm_process_creality_common",
 	"from": "system",
 	"setting_id": "jvnrh3jh6Btbs1Ja",

resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.4.json

@@ -1,6 +1,7 @@
 {
 	"type": "process",
 	"name": "0.20mm Standard @Creality Ender3V3SE 0.4",
+	"renamed_from": "0.20mm Standard @Creality Ender3V3SE",
 	"inherits": "fdm_process_creality_common",
 	"from": "system",
 	"setting_id": "YLkw9eyyK7cm97ek",

resources/profiles/Creality/process/0.20mm Standard @Creality K1 SE 0.4.json

@@ -1,6 +1,7 @@
 {
 	"type": "process",
 	"name": "0.20mm Standard @Creality K1 SE",
+	"renamed_from": "0.20mm Fast @Creality K1 SE 0.4",
 	"inherits": "fdm_process_creality_common",
 	"from": "system",
 	"setting_id": "eR9pRC1qPENNx8U9",
@@ -264,4 +265,4 @@
 	"wipe_tower_extra_spacing": "100%",
 	"wipe_tower_rotation_angle": "0",
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70"
-}
+}

resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.4.json

@@ -1,6 +1,7 @@
 {
 	"type": "process",
 	"name": "0.24mm Draft @Creality Ender3V3SE 0.4",
+	"renamed_from": "0.24mm Draft @Creality Ender3V3SE",
 	"inherits": "fdm_process_creality_common",
 	"from": "system",
 	"setting_id": "Hg10EUNCLMEYYBN1",

resources/profiles/Creality/process/0.48mm Draft @Creality K1C 0.8 nozzle.json

@@ -1,6 +1,7 @@
 {
 	"type": "process",
 	"name": "0.48mm Draft @Creality K1C",
+	"renamed_from": "0.48mm Draft @Creality K1C (0.8 nozzle)",
 	"inherits": "fdm_process_common_klipper",
 	"from": "system",
 	"setting_id": "qaiff3f8gSQ1GVj1",

resources/profiles/Elegoo/filament/Generic/Generic PETG PRO @Elegoo.json

@@ -2,6 +2,7 @@
 	"type": "filament",
 	"setting_id": "pKzSR8XeyyUDbrNW",
 	"name": "Generic PETG PRO @Elegoo",
+	"renamed_from": "Elegoo Generic PETG PRO",
 	"from": "system",
 	"instantiation": "true",
 	"inherits": "Generic PETG @base",

resources/profiles/Ginger Additive/filament/Ginger Generic PETG.json

@@ -1,6 +1,7 @@
 {
 	"type": "filament",
 	"name": "Ginger Generic PETG",
+	"renamed_from": "Ginger Generic rPETG",
 	"inherits": "fdm_filament_common",
 	"from": "system",
 	"setting_id": "ue95N2e65rdp5K6c",

resources/profiles/Ginger Additive/filament/Ginger Generic PLA.json

@@ -1,6 +1,7 @@
 {
 	"type": "filament",
 	"name": "Ginger Generic PLA",
+	"renamed_from": "Ginger Generic rPLA",
 	"inherits": "fdm_filament_common",
 	"from": "system",
 	"setting_id": "Z1scjKDBFoDaTa2C",

resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PETG PRO @System.json

@@ -18,5 +18,5 @@
 		"5"
 	],
 	"compatible_printers": [],
-	"renamed_from": "Elegoo PETG PRO"
+	"renamed_from": "Elegoo PETG PRO;Elegoo PETG Pro @System"
 }

resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo Rapid PETG @System.json

@@ -33,5 +33,5 @@
 		"250"
 	],
 	"compatible_printers": [],
-	"renamed_from": "Elegoo Rapid PETG;Elegoo Rapid PETG+"
+	"renamed_from": "Elegoo Rapid PETG;Elegoo Rapid PETG+;Elegoo RAPID PETG;Elegoo RAPID PETG+"
 }

resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo Rapid PLA+ @System.json

@@ -45,5 +45,5 @@
 		"; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
 	],
 	"compatible_printers": [],
-	"renamed_from": "Elegoo Rapid PLA+"
+	"renamed_from": "Elegoo Rapid PLA+;Elegoo RAPID PLA+"
 }

resources/profiles/Peopoly/filament/Peopoly Generic PLA.json

@@ -1,6 +1,7 @@
 {
 	"type": "filament",
 	"name": "Peopoly Generic PLA",
+	"renamed_from": "Peopoly Generic PLA 0.8 nozzle",
 	"inherits": "fdm_filament_pla",
 	"from": "system",
 	"setting_id": "KNsVV4dvEWAAkzDE",

resources/profiles/Qidi.json

@@ -1,6 +1,6 @@
 {
 	"name": "Qidi",
-	"version": "02.04.00.05",
+	"version": "02.04.00.06",
 	"force_update": "0",
 	"description": "Qidi configurations",
 	"machine_model_list": [

resources/profiles/Qidi/filament/Bambu ABS @0.2 nozzle.json

@@ -19,9 +19,6 @@
 		"2"
 	],
 	"compatible_printers": [
-		"Qidi X-Plus 0.2 nozzle",
-		"Qidi X-Max 0.2 nozzle",
-		"Qidi X-CF Pro 0.2 nozzle",
 		"Qidi X-Smart 3 0.2 nozzle",
 		"Qidi X-Plus 3 0.2 nozzle",
 		"Qidi X-Max 3 0.2 nozzle"

resources/profiles/Qidi/filament/Bambu ABS @0.6 nozzle.json

@@ -13,9 +13,6 @@
 		"0.014"
 	],
 	"compatible_printers": [
-		"Qidi X-Plus 0.6 nozzle",
-		"Qidi X-Max 0.6 nozzle",
-		"Qidi X-CF Pro 0.6 nozzle",
 		"Qidi X-Smart 3 0.6 nozzle",
 		"Qidi X-Plus 3 0.6 nozzle",
 		"Qidi X-Max 3 0.6 nozzle"

resources/profiles/Qidi/filament/Bambu ABS @0.8 nozzle.json

@@ -25,9 +25,6 @@
 		"10"
 	],
 	"compatible_printers": [
-		"Qidi X-Plus 0.8 nozzle",
-		"Qidi X-Max 0.8 nozzle",
-		"Qidi X-CF Pro 0.8 nozzle",
 		"Qidi X-Smart 3 0.8 nozzle",
 		"Qidi X-Plus 3 0.8 nozzle",
 		"Qidi X-Max 3 0.8 nozzle"

resources/profiles/Qidi/filament/Bambu PETG @0.2 nozzle.json

@@ -46,9 +46,6 @@
 		"1"
 	],
 	"compatible_printers": [
-		"Qidi X-Plus 0.2 nozzle",
-		"Qidi X-Max 0.2 nozzle",
-		"Qidi X-CF Pro 0.2 nozzle",
 		"Qidi X-Smart 3 0.2 nozzle",
 		"Qidi X-Plus 3 0.2 nozzle",
 		"Qidi X-Max 3 0.2 nozzle",

resources/profiles/Qidi/filament/Bambu PETG @0.6 nozzle.json

@@ -46,9 +46,6 @@
 		"10"
 	],
 	"compatible_printers": [
-		"Qidi X-Plus 0.6 nozzle",
-		"Qidi X-Max 0.6 nozzle",
-		"Qidi X-CF Pro 0.6 nozzle",
 		"Qidi X-Smart 3 0.6 nozzle",
 		"Qidi X-Plus 3 0.6 nozzle",
 		"Qidi X-Max 3 0.6 nozzle"

resources/profiles/Qidi/filament/Bambu PETG @0.8 nozzle.json

@@ -46,9 +46,6 @@
 		"10"
 	],
 	"compatible_printers": [
-		"Qidi X-Plus 0.8 nozzle",
-		"Qidi X-Max 0.8 nozzle",
-		"Qidi X-CF Pro 0.8 nozzle",
 		"Qidi X-Smart 3 0.8 nozzle",
 		"Qidi X-Plus 3 0.8 nozzle",
 		"Qidi X-Max 3 0.8 nozzle"

resources/profiles/Qidi/filament/Bambu PLA @0.2 nozzle.json

@@ -19,9 +19,6 @@
 		"2"
 	],
 	"compatible_printers": [
-		"Qidi X-Plus 0.2 nozzle",
-		"Qidi X-Max 0.2 nozzle",
-		"Qidi X-CF Pro 0.2 nozzle",
 		"Qidi X-Smart 3 0.2 nozzle",
 		"Qidi X-Plus 3 0.2 nozzle",
 		"Qidi X-Max 3 0.2 nozzle"

resources/profiles/Qidi/filament/Bambu PLA @0.6 nozzle.json

@@ -22,9 +22,6 @@
 		"20"
 	],
 	"compatible_printers": [
-		"Qidi X-Plus 0.6 nozzle",
-		"Qidi X-Max 0.6 nozzle",
-		"Qidi X-CF Pro 0.6 nozzle",
 		"Qidi X-Smart 3 0.6 nozzle",
 		"Qidi X-Plus 3 0.6 nozzle",
 		"Qidi X-Max 3 0.6 nozzle"

resources/profiles/Qidi/filament/Bambu PLA @0.8 nozzle.json

@@ -22,9 +22,6 @@
 		"20"
 	],
 	"compatible_printers": [
-		"Qidi X-Plus 0.8 nozzle",
-		"Qidi X-Max 0.8 nozzle",
-		"Qidi X-CF Pro 0.8 nozzle",
 		"Qidi X-Smart 3 0.8 nozzle",
 		"Qidi X-Plus 3 0.8 nozzle",
 		"Qidi X-Max 3 0.8 nozzle"

resources/profiles/Qidi/filament/HATCHBOX ABS @Qidi 0.2 nozzle.json

@@ -19,9 +19,6 @@
 		"2"
 	],
 	"compatible_printers": [
-		"Qidi X-Plus 0.2 nozzle",
-		"Qidi X-Max 0.2 nozzle",
-		"Qidi X-CF Pro 0.2 nozzle",
 		"Qidi X-Smart 3 0.2 nozzle",
 		"Qidi X-Plus 3 0.2 nozzle",
 		"Qidi X-Max 3 0.2 nozzle"

resources/profiles/Qidi/filament/HATCHBOX ABS @Qidi 0.6 nozzle.json

@@ -13,9 +13,6 @@
 		"0.014"
 	],
 	"compatible_printers": [
-		"Qidi X-Plus 0.6 nozzle",
-		"Qidi X-Max 0.6 nozzle",
-		"Qidi X-CF Pro 0.6 nozzle",
 		"Qidi X-Smart 3 0.6 nozzle",
 		"Qidi X-Plus 3 0.6 nozzle",
 		"Qidi X-Max 3 0.6 nozzle"

resources/profiles/Qidi/filament/HATCHBOX ABS @Qidi 0.8 nozzle.json

@@ -25,9 +25,6 @@
 		"10"
 	],
 	"compatible_printers": [
-		"Qidi X-Plus 0.8 nozzle",
-		"Qidi X-Max 0.8 nozzle",
-		"Qidi X-CF Pro 0.8 nozzle",
 		"Qidi X-Smart 3 0.8 nozzle",
 		"Qidi X-Plus 3 0.8 nozzle",
 		"Qidi X-Max 3 0.8 nozzle"

resources/profiles/Qidi/filament/HATCHBOX PETG @Qidi 0.2 nozzle.json

@@ -46,9 +46,6 @@
 		"1"
 	],
 	"compatible_printers": [
-		"Qidi X-Plus 0.2 nozzle",
-		"Qidi X-Max 0.2 nozzle",
-		"Qidi X-CF Pro 0.2 nozzle",
 		"Qidi X-Smart 3 0.2 nozzle",
 		"Qidi X-Plus 3 0.2 nozzle",
 		"Qidi X-Max 3 0.2 nozzle",

resources/profiles/Qidi/filament/HATCHBOX PETG @Qidi 0.6 nozzle.json

@@ -46,9 +46,6 @@
 		"10"
 	],
 	"compatible_printers": [
-		"Qidi X-Plus 0.6 nozzle",
-		"Qidi X-Max 0.6 nozzle",
-		"Qidi X-CF Pro 0.6 nozzle",
 		"Qidi X-Smart 3 0.6 nozzle",
 		"Qidi X-Plus 3 0.6 nozzle",
 		"Qidi X-Max 3 0.6 nozzle"

resources/profiles/Qidi/filament/HATCHBOX PETG @Qidi 0.8 nozzle.json

@@ -46,9 +46,6 @@
 		"10"
 	],
 	"compatible_printers": [
-		"Qidi X-Plus 0.8 nozzle",
-		"Qidi X-Max 0.8 nozzle",
-		"Qidi X-CF Pro 0.8 nozzle",
 		"Qidi X-Smart 3 0.8 nozzle",
 		"Qidi X-Plus 3 0.8 nozzle",
 		"Qidi X-Max 3 0.8 nozzle"

resources/profiles/Qidi/filament/HATCHBOX PLA @Qidi 0.2 nozzle.json

@@ -19,9 +19,6 @@
 		"2"
 	],
 	"compatible_printers": [
-		"Qidi X-Plus 0.2 nozzle",
-		"Qidi X-Max 0.2 nozzle",
-		"Qidi X-CF Pro 0.2 nozzle",
 		"Qidi X-Smart 3 0.2 nozzle",
 		"Qidi X-Plus 3 0.2 nozzle",
 		"Qidi X-Max 3 0.2 nozzle"

resources/profiles/Qidi/filament/HATCHBOX PLA @Qidi 0.6 nozzle.json

@@ -22,9 +22,6 @@
 		"20"
 	],
 	"compatible_printers": [
-		"Qidi X-Plus 0.6 nozzle",
-		"Qidi X-Max 0.6 nozzle",
-		"Qidi X-CF Pro 0.6 nozzle",
 		"Qidi X-Smart 3 0.6 nozzle",
 		"Qidi X-Plus 3 0.6 nozzle",
 		"Qidi X-Max 3 0.6 nozzle"

resources/profiles/Qidi/filament/HATCHBOX PLA @Qidi 0.8 nozzle.json

@@ -22,9 +22,6 @@
 		"20"
 	],
 	"compatible_printers": [
-		"Qidi X-Plus 0.8 nozzle",
-		"Qidi X-Max 0.8 nozzle",
-		"Qidi X-CF Pro 0.8 nozzle",
 		"Qidi X-Smart 3 0.8 nozzle",
 		"Qidi X-Plus 3 0.8 nozzle",
 		"Qidi X-Max 3 0.8 nozzle"

resources/profiles/Qidi/filament/Overture ABS @Qidi 0.2 nozzle.json

@@ -16,9 +16,6 @@
 		"2"
 	],
 	"compatible_printers": [
-		"Qidi X-Plus 0.2 nozzle",
-		"Qidi X-Max 0.2 nozzle",
-		"Qidi X-CF Pro 0.2 nozzle",
 		"Qidi X-Smart 3 0.2 nozzle",
 		"Qidi X-Plus 3 0.2 nozzle",
 		"Qidi X-Max 3 0.2 nozzle"

resources/profiles/Qidi/filament/Overture ABS @Qidi 0.6 nozzle.json

@@ -13,9 +13,6 @@
 		"0.018"
 	],
 	"compatible_printers": [
-		"Qidi X-Plus 0.6 nozzle",
-		"Qidi X-Max 0.6 nozzle",
-		"Qidi X-CF Pro 0.6 nozzle",
 		"Qidi X-Smart 3 0.6 nozzle",
 		"Qidi X-Plus 3 0.6 nozzle",
 		"Qidi X-Max 3 0.6 nozzle"

resources/profiles/Qidi/filament/Overture ABS @Qidi 0.8 nozzle.json

@@ -16,9 +16,6 @@
 		"10"
 	],
 	"compatible_printers": [
-		"Qidi X-Plus 0.8 nozzle",
-		"Qidi X-Max 0.8 nozzle",
-		"Qidi X-CF Pro 0.8 nozzle",
 		"Qidi X-Smart 3 0.8 nozzle",
 		"Qidi X-Plus 3 0.8 nozzle",
 		"Qidi X-Max 3 0.8 nozzle"

resources/profiles/Qidi/filament/Overture PLA @Qidi 0.2 nozzle.json

@@ -16,9 +16,6 @@
 		"2"
 	],
 	"compatible_printers": [
-		"Qidi X-Plus 0.2 nozzle",
-		"Qidi X-Max 0.2 nozzle",
-		"Qidi X-CF Pro 0.2 nozzle",
 		"Qidi X-Smart 3 0.2 nozzle",
 		"Qidi X-Plus 3 0.2 nozzle",
 		"Qidi X-Max 3 0.2 nozzle"

resources/profiles/Qidi/filament/Overture PLA @Qidi 0.6 nozzle.json

@@ -13,9 +13,6 @@
 		"0.017"
 	],
 	"compatible_printers": [
-		"Qidi X-Plus 0.6 nozzle",
-		"Qidi X-Max 0.6 nozzle",
-		"Qidi X-CF Pro 0.6 nozzle",
 		"Qidi X-Smart 3 0.6 nozzle",
 		"Qidi X-Plus 3 0.6 nozzle",
 		"Qidi X-Max 3 0.6 nozzle"

resources/profiles/Qidi/filament/Overture PLA @Qidi 0.8 nozzle.json

@@ -13,9 +13,6 @@
 		"0.009"
 	],
 	"compatible_printers": [
-		"Qidi X-Plus 0.8 nozzle",
-		"Qidi X-Max 0.8 nozzle",
-		"Qidi X-CF Pro 0.8 nozzle",
 		"Qidi X-Smart 3 0.8 nozzle",
 		"Qidi X-Plus 3 0.8 nozzle",
 		"Qidi X-Max 3 0.8 nozzle"

resources/profiles/Qidi/filament/PolyLite ABS @Qidi 0.2 nozzle.json

@@ -16,9 +16,6 @@
 		"2"
 	],
 	"compatible_printers": [
-		"Qidi X-Plus 0.2 nozzle",
-		"Qidi X-Max 0.2 nozzle",
-		"Qidi X-CF Pro 0.2 nozzle",
 		"Qidi X-Smart 3 0.2 nozzle",
 		"Qidi X-Plus 3 0.2 nozzle",
 		"Qidi X-Max 3 0.2 nozzle"

resources/profiles/Qidi/filament/PolyLite ABS @Qidi 0.6 nozzle.json

@@ -13,9 +13,6 @@
 		"0.018"
 	],
 	"compatible_printers": [
-		"Qidi X-Plus 0.6 nozzle",
-		"Qidi X-Max 0.6 nozzle",
-		"Qidi X-CF Pro 0.6 nozzle",
 		"Qidi X-Smart 3 0.6 nozzle",
 		"Qidi X-Plus 3 0.6 nozzle",
 		"Qidi X-Max 3 0.6 nozzle"

resources/profiles/Qidi/filament/PolyLite ABS @Qidi 0.8 nozzle.json

@@ -16,9 +16,6 @@
 		"10"
 	],
 	"compatible_printers": [
-		"Qidi X-Plus 0.8 nozzle",
-		"Qidi X-Max 0.8 nozzle",
-		"Qidi X-CF Pro 0.8 nozzle",
 		"Qidi X-Smart 3 0.8 nozzle",
 		"Qidi X-Plus 3 0.8 nozzle",
 		"Qidi X-Max 3 0.8 nozzle"

resources/profiles/Qidi/filament/PolyLite PLA @Qidi 0.2 nozzle.json

@@ -16,9 +16,6 @@
 		"2"
 	],
 	"compatible_printers": [
-		"Qidi X-Plus 0.2 nozzle",
-		"Qidi X-Max 0.2 nozzle",
-		"Qidi X-CF Pro 0.2 nozzle",
 		"Qidi X-Smart 3 0.2 nozzle",
 		"Qidi X-Plus 3 0.2 nozzle",
 		"Qidi X-Max 3 0.2 nozzle"

resources/profiles/Qidi/filament/PolyLite PLA @Qidi 0.6 nozzle.json

@@ -13,9 +13,6 @@
 		"0.017"
 	],
 	"compatible_printers": [
-		"Qidi X-Plus 0.6 nozzle",
-		"Qidi X-Max 0.6 nozzle",
-		"Qidi X-CF Pro 0.6 nozzle",
 		"Qidi X-Smart 3 0.6 nozzle",
 		"Qidi X-Plus 3 0.6 nozzle",
 		"Qidi X-Max 3 0.6 nozzle"

resources/profiles/Qidi/filament/PolyLite PLA @Qidi 0.8 nozzle.json

@@ -13,9 +13,6 @@
 		"0.009"
 	],
 	"compatible_printers": [
-		"Qidi X-Plus 0.8 nozzle",
-		"Qidi X-Max 0.8 nozzle",
-		"Qidi X-CF Pro 0.8 nozzle",
 		"Qidi X-Smart 3 0.8 nozzle",
 		"Qidi X-Plus 3 0.8 nozzle",
 		"Qidi X-Max 3 0.8 nozzle"

resources/profiles/Qidi/filament/Q2/Bambu ABS @Q2.json

@@ -102,4 +102,4 @@
 	"textured_cool_plate_temp_initial_layer": [
 		"80"
 	]
-}
+}

resources/profiles/Qidi/filament/Q2/Bambu ABS @Q2C.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"filament_id": "GFB99",
 	"name": "Bambu ABS@Q2C-Series",
-	"from": "system",
-	"instantiation": "false",
 	"inherits": "fdm_filament_q_common",
+	"from": "system",
+	"filament_id": "GFB99",
+	"instantiation": "false",
 	"box_temperature_range_high": [
 		"45"
 	],
@@ -102,4 +102,4 @@
 	"textured_cool_plate_temp_initial_layer": [
 		"80"
 	]
-}
+}

resources/profiles/Qidi/filament/Q2/Bambu ABS @Qidi Q2C 0.2 nozzle.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"setting_id": "yHD2P97YYI869y1a",
 	"name": "Bambu ABS @Qidi Q2C 0.2 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "Bambu ABS@Q2C-Series",
+	"from": "system",
+	"setting_id": "yHD2P97YYI869y1a",
+	"instantiation": "true",
 	"chamber_temperature": [
 		"0"
 	],

resources/profiles/Qidi/filament/Q2/Bambu ABS @Qidi Q2C 0.4 nozzle.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"setting_id": "dIUVKJDEofMGqc8C",
 	"name": "Bambu ABS @Qidi Q2C 0.4 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "Bambu ABS@Q2C-Series",
+	"from": "system",
+	"setting_id": "dIUVKJDEofMGqc8C",
+	"instantiation": "true",
 	"pressure_advance": [
 		"0.03"
 	],

resources/profiles/Qidi/filament/Q2/Bambu ABS @Qidi Q2C 0.6 nozzle.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"setting_id": "0leYv1TdNe38wFpf",
 	"name": "Bambu ABS @Qidi Q2C 0.6 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "Bambu ABS@Q2C-Series",
+	"from": "system",
+	"setting_id": "0leYv1TdNe38wFpf",
+	"instantiation": "true",
 	"nozzle_temperature": [
 		"250"
 	],

resources/profiles/Qidi/filament/Q2/Bambu ABS @Qidi Q2C 0.8 nozzle.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"setting_id": "BvoaoxjqBQLvupeM",
 	"name": "Bambu ABS @Qidi Q2C 0.8 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "Bambu ABS@Q2C-Series",
+	"from": "system",
+	"setting_id": "BvoaoxjqBQLvupeM",
+	"instantiation": "true",
 	"nozzle_temperature": [
 		"250"
 	],

resources/profiles/Qidi/filament/Q2/Bambu PETG @Q2.json

@@ -99,4 +99,4 @@
 	"textured_cool_plate_temp_initial_layer": [
 		"60"
 	]
-}
+}

resources/profiles/Qidi/filament/Q2/Bambu PETG @Q2C.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"filament_id": "GFG99",
 	"name": "Bambu PETG@Q2C-Series",
-	"from": "system",
-	"instantiation": "false",
 	"inherits": "fdm_filament_q_common",
+	"from": "system",
+	"filament_id": "GFG99",
+	"instantiation": "false",
 	"box_temperature_range_high": [
 		"45"
 	],
@@ -99,4 +99,4 @@
 	"textured_cool_plate_temp_initial_layer": [
 		"60"
 	]
-}
+}

resources/profiles/Qidi/filament/Q2/Bambu PETG @Qidi Q2C 0.2 nozzle.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"setting_id": "DR6lPjo6HXfJPRev",
 	"name": "Bambu PETG @Qidi Q2C 0.2 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "Bambu PETG@Q2C-Series",
+	"from": "system",
+	"setting_id": "DR6lPjo6HXfJPRev",
+	"instantiation": "true",
 	"filament_max_volumetric_speed": [
 		"1"
 	],

resources/profiles/Qidi/filament/Q2/Bambu PETG @Qidi Q2C 0.4 nozzle.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"setting_id": "abyo9tUNfJ41WD2x",
 	"name": "Bambu PETG @Qidi Q2C 0.4 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "Bambu PETG@Q2C-Series",
+	"from": "system",
+	"setting_id": "abyo9tUNfJ41WD2x",
+	"instantiation": "true",
 	"pressure_advance": [
 		"0.056"
 	],

resources/profiles/Qidi/filament/Q2/Bambu PETG @Qidi Q2C 0.6 nozzle.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"setting_id": "cG6FXCNr8n34Asel",
 	"name": "Bambu PETG @Qidi Q2C 0.6 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "Bambu PETG@Q2C-Series",
+	"from": "system",
+	"setting_id": "cG6FXCNr8n34Asel",
+	"instantiation": "true",
 	"pressure_advance": [
 		"0.04"
 	],

resources/profiles/Qidi/filament/Q2/Bambu PETG @Qidi Q2C 0.8 nozzle.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"setting_id": "3Opgt1lYHnCWi4G6",
 	"name": "Bambu PETG @Qidi Q2C 0.8 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "Bambu PETG@Q2C-Series",
+	"from": "system",
+	"setting_id": "3Opgt1lYHnCWi4G6",
+	"instantiation": "true",
 	"pressure_advance": [
 		"0.04"
 	],

resources/profiles/Qidi/filament/Q2/Bambu PLA @Q2C.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"filament_id": "GFL99",
 	"name": "Bambu PLA@Q2C-Series",
-	"from": "system",
-	"instantiation": "false",
 	"inherits": "fdm_filament_q_common",
+	"from": "system",
+	"filament_id": "GFL99",
+	"instantiation": "false",
 	"filament_adhesiveness_category": [
 		"100"
 	],

resources/profiles/Qidi/filament/Q2/Bambu PLA @Qidi Q2C 0.2 nozzle.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"setting_id": "WIoSfzFsVr63PIJn",
 	"name": "Bambu PLA @Qidi Q2C 0.2 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "Bambu PLA@Q2C-Series",
+	"from": "system",
+	"setting_id": "WIoSfzFsVr63PIJn",
+	"instantiation": "true",
 	"filament_max_volumetric_speed": [
 		"2"
 	],

resources/profiles/Qidi/filament/Q2/Bambu PLA @Qidi Q2C 0.4 nozzle.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"setting_id": "6R2VF4VRx4OsEAIr",
 	"name": "Bambu PLA @Qidi Q2C 0.4 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "Bambu PLA@Q2C-Series",
+	"from": "system",
+	"setting_id": "6R2VF4VRx4OsEAIr",
+	"instantiation": "true",
 	"pressure_advance": [
 		"0.034"
 	],

resources/profiles/Qidi/filament/Q2/Bambu PLA @Qidi Q2C 0.6 nozzle.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"setting_id": "4nf4gNkkvFnDbzRa",
 	"name": "Bambu PLA @Qidi Q2C 0.6 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "Bambu PLA@Q2C-Series",
+	"from": "system",
+	"setting_id": "4nf4gNkkvFnDbzRa",
+	"instantiation": "true",
 	"pressure_advance": [
 		"0.016"
 	],

resources/profiles/Qidi/filament/Q2/Bambu PLA @Qidi Q2C 0.8 nozzle.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"setting_id": "CHcUut3zMsRJAIcx",
 	"name": "Bambu PLA @Qidi Q2C 0.8 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "Bambu PLA@Q2C-Series",
+	"from": "system",
+	"setting_id": "CHcUut3zMsRJAIcx",
+	"instantiation": "true",
 	"pressure_advance": [
 		"0.008"
 	],

resources/profiles/Qidi/filament/Q2/Generic ABS @Q2.json

@@ -105,4 +105,4 @@
 	"textured_cool_plate_temp_initial_layer": [
 		"80"
 	]
-}
+}

resources/profiles/Qidi/filament/Q2/Generic ABS @Q2C.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"filament_id": "QD_2_0_11",
 	"name": "Generic ABS@Q2C-Series",
-	"from": "system",
-	"instantiation": "false",
 	"inherits": "fdm_filament_q_common",
+	"from": "system",
+	"filament_id": "QD_2_0_11",
+	"instantiation": "false",
 	"box_temperature_range_high": [
 		"45"
 	],
@@ -105,4 +105,4 @@
 	"textured_cool_plate_temp_initial_layer": [
 		"80"
 	]
-}
+}

resources/profiles/Qidi/filament/Q2/Generic ABS @Qidi Q2C 0.2 nozzle.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"setting_id": "fcId8eFG20nodipB",
 	"name": "Generic ABS @Qidi Q2C 0.2 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "Generic ABS@Q2C-Series",
+	"from": "system",
+	"setting_id": "fcId8eFG20nodipB",
+	"instantiation": "true",
 	"filament_max_volumetric_speed": [
 		"2"
 	],

resources/profiles/Qidi/filament/Q2/Generic ABS @Qidi Q2C 0.4 nozzle.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"setting_id": "nCmyUKILQpR1nypd",
 	"name": "Generic ABS @Qidi Q2C 0.4 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "Generic ABS@Q2C-Series",
+	"from": "system",
+	"setting_id": "nCmyUKILQpR1nypd",
+	"instantiation": "true",
 	"pressure_advance": [
 		"0.03"
 	],

resources/profiles/Qidi/filament/Q2/Generic ABS @Qidi Q2C 0.6 nozzle.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"setting_id": "7wsHMKJwQfUfZ3za",
 	"name": "Generic ABS @Qidi Q2C 0.6 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "Generic ABS@Q2C-Series",
+	"from": "system",
+	"setting_id": "7wsHMKJwQfUfZ3za",
+	"instantiation": "true",
 	"filament_max_volumetric_speed": [
 		"24.5"
 	],

resources/profiles/Qidi/filament/Q2/Generic ABS @Qidi Q2C 0.8 nozzle.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"setting_id": "XLORH5X2VLIxTozv",
 	"name": "Generic ABS @Qidi Q2C 0.8 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "Generic ABS@Q2C-Series",
+	"from": "system",
+	"setting_id": "XLORH5X2VLIxTozv",
+	"instantiation": "true",
 	"filament_max_volumetric_speed": [
 		"24.5"
 	],

resources/profiles/Qidi/filament/Q2/Generic PC @Q2C.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"filament_id": "QD_2_0_23",
 	"name": "Generic PC@Q2C-Series",
-	"from": "system",
-	"instantiation": "false",
 	"inherits": "fdm_filament_q_common",
+	"from": "system",
+	"filament_id": "QD_2_0_23",
+	"instantiation": "false",
 	"box_temperature_range_high": [
 		"65"
 	],

resources/profiles/Qidi/filament/Q2/Generic PC @Qidi Q2C 0.2 nozzle.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"setting_id": "khy9tY2jZWHSlIYt",
 	"name": "Generic PC @Qidi Q2C 0.2 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "Generic PC@Q2C-Series",
+	"from": "system",
+	"setting_id": "khy9tY2jZWHSlIYt",
+	"instantiation": "true",
 	"filament_flow_ratio": [
 		"0.94"
 	],

resources/profiles/Qidi/filament/Q2/Generic PC @Qidi Q2C 0.4 nozzle.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"setting_id": "Wcm3rVsaUpou9xRq",
 	"name": "Generic PC @Qidi Q2C 0.4 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "Generic PC@Q2C-Series",
+	"from": "system",
+	"setting_id": "Wcm3rVsaUpou9xRq",
+	"instantiation": "true",
 	"filament_flow_ratio": [
 		"0.95"
 	],

resources/profiles/Qidi/filament/Q2/Generic PC @Qidi Q2C 0.6 nozzle.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"setting_id": "8pHle7WRU4FL2qfo",
 	"name": "Generic PC @Qidi Q2C 0.6 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "Generic PC@Q2C-Series",
+	"from": "system",
+	"setting_id": "8pHle7WRU4FL2qfo",
+	"instantiation": "true",
 	"filament_flow_ratio": [
 		"0.95"
 	],

resources/profiles/Qidi/filament/Q2/Generic PC @Qidi Q2C 0.8 nozzle.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"setting_id": "ymIxEf9ioip57TML",
 	"name": "Generic PC @Qidi Q2C 0.8 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "Generic PC@Q2C-Series",
+	"from": "system",
+	"setting_id": "ymIxEf9ioip57TML",
+	"instantiation": "true",
 	"filament_flow_ratio": [
 		"0.95"
 	],

resources/profiles/Qidi/filament/Q2/Generic PETG @Q2.json

@@ -102,4 +102,4 @@
 	"textured_cool_plate_temp_initial_layer": [
 		"60"
 	]
-}
+}

resources/profiles/Qidi/filament/Q2/Generic PETG @Q2C.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"filament_id": "QD_2_0_41",
 	"name": "Generic PETG@Q2C-Series",
-	"from": "system",
-	"instantiation": "false",
 	"inherits": "fdm_filament_q_common",
+	"from": "system",
+	"filament_id": "QD_2_0_41",
+	"instantiation": "false",
 	"box_temperature_range_high": [
 		"45"
 	],
@@ -102,4 +102,4 @@
 	"textured_cool_plate_temp_initial_layer": [
 		"60"
 	]
-}
+}

resources/profiles/Qidi/filament/Q2/Generic PETG @Qidi Q2C 0.2 nozzle.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"setting_id": "IcynzuX5ojXgX2dk",
 	"name": "Generic PETG @Qidi Q2C 0.2 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "Generic PETG@Q2C-Series",
+	"from": "system",
+	"setting_id": "IcynzuX5ojXgX2dk",
+	"instantiation": "true",
 	"filament_max_volumetric_speed": [
 		"1"
 	],

resources/profiles/Qidi/filament/Q2/Generic PETG @Qidi Q2C 0.4 nozzle.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"setting_id": "7QauCi8rhighWkri",
 	"name": "Generic PETG @Qidi Q2C 0.4 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "Generic PETG@Q2C-Series",
+	"from": "system",
+	"setting_id": "7QauCi8rhighWkri",
+	"instantiation": "true",
 	"pressure_advance": [
 		"0.056"
 	],

resources/profiles/Qidi/filament/Q2/Generic PETG @Qidi Q2C 0.6 nozzle.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"setting_id": "AM1y4FYs7fv4WTTo",
 	"name": "Generic PETG @Qidi Q2C 0.6 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "Generic PETG@Q2C-Series",
+	"from": "system",
+	"setting_id": "AM1y4FYs7fv4WTTo",
+	"instantiation": "true",
 	"pressure_advance": [
 		"0.04"
 	],

resources/profiles/Qidi/filament/Q2/Generic PETG @Qidi Q2C 0.8 nozzle.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"setting_id": "b3TpL9kGWf1wSydw",
 	"name": "Generic PETG @Qidi Q2C 0.8 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "Generic PETG@Q2C-Series",
+	"from": "system",
+	"setting_id": "b3TpL9kGWf1wSydw",
+	"instantiation": "true",
 	"pressure_advance": [
 		"0.04"
 	],