Fixes missing Plugins category for installed plugins

Co-authored-by: Rodrigo Faselli <162915171+RF47@users.noreply.github.com>

CMakeLists.txt

@@ -826,37 +826,6 @@ find_package(OpenSSL REQUIRED)
 find_package(CURL REQUIRED)
 find_package(Freetype REQUIRED)
 
-if (SLIC3R_GUI)
-    # LibDataChannel's installed export references its bundled dependencies,
-    # but does not install their CMake targets. Recreate those targets from
-    # the same dependency prefix before loading the LibDataChannel config.
-    if (NOT TARGET Usrsctp::usrsctp)
-        find_library(_ORCA_USRSCTP_LIBRARY NAMES usrsctp
-            PATHS "${CMAKE_PREFIX_PATH}/lib" NO_DEFAULT_PATH)
-        if (_ORCA_USRSCTP_LIBRARY)
-            add_library(Usrsctp::usrsctp UNKNOWN IMPORTED GLOBAL)
-            set_target_properties(Usrsctp::usrsctp PROPERTIES
-                IMPORTED_LOCATION "${_ORCA_USRSCTP_LIBRARY}"
-                IMPORTED_LINK_INTERFACE_LANGUAGES C
-                INTERFACE_LINK_LIBRARIES "Threads::Threads")
-        endif()
-    endif()
-
-    if (NOT TARGET LibJuice::LibJuice)
-        find_library(_ORCA_LIBJUICE_LIBRARY NAMES juice
-            PATHS "${CMAKE_PREFIX_PATH}/lib" NO_DEFAULT_PATH)
-        if (_ORCA_LIBJUICE_LIBRARY)
-            add_library(LibJuice::LibJuice UNKNOWN IMPORTED GLOBAL)
-            set_target_properties(LibJuice::LibJuice PROPERTIES
-                IMPORTED_LOCATION "${_ORCA_LIBJUICE_LIBRARY}"
-                IMPORTED_LINK_INTERFACE_LANGUAGES C
-                INTERFACE_LINK_LIBRARIES "Threads::Threads")
-        endif()
-    endif()
-
-    find_package(LibDataChannel CONFIG REQUIRED)
-endif()
-
 
 add_library(libcurl INTERFACE)
 target_link_libraries(libcurl INTERFACE CURL::libcurl)
@@ -1137,7 +1106,6 @@ function(orcaslicer_copy_dlls target config postfix output_dlls)
     endif ()
     file(COPY ${_occt_dlls}
             ${CMAKE_PREFIX_PATH}/bin/freetype.dll
-            ${CMAKE_PREFIX_PATH}/bin/avformat-61.dll
             ${CMAKE_PREFIX_PATH}/bin/avcodec-61.dll
             ${CMAKE_PREFIX_PATH}/bin/swresample-5.dll
             ${CMAKE_PREFIX_PATH}/bin/swscale-8.dll
@@ -1150,7 +1118,6 @@ function(orcaslicer_copy_dlls target config postfix output_dlls)
         ${_out_dir}/WebView2Loader.dll
 
         ${_out_dir}/freetype.dll
-        ${_out_dir}/avformat-61.dll
         ${_out_dir}/avcodec-61.dll
         ${_out_dir}/swresample-5.dll
         ${_out_dir}/swscale-8.dll
@@ -1174,10 +1141,7 @@ function(orcaslicer_copy_sos target config postfix output_sos)
         set(_out_dir "${CMAKE_CURRENT_BINARY_DIR}")
     endif ()
 
-    file(COPY ${CMAKE_PREFIX_PATH}/lib/libavformat.so
-            ${CMAKE_PREFIX_PATH}/lib/libavformat.so.61
-            ${CMAKE_PREFIX_PATH}/lib/libavformat.so.61.1.100
-            ${CMAKE_PREFIX_PATH}/lib/libavcodec.so
+    file(COPY ${CMAKE_PREFIX_PATH}/lib/libavcodec.so
             ${CMAKE_PREFIX_PATH}/lib/libavcodec.so.61
             ${CMAKE_PREFIX_PATH}/lib/libavcodec.so.61.3.100
             ${CMAKE_PREFIX_PATH}/lib/libavutil.so
@@ -1192,9 +1156,6 @@ function(orcaslicer_copy_sos target config postfix output_sos)
          DESTINATION ${_out_dir})
 
     set(${output_sos}
-        ${_out_dir}/libavformat.so
-        ${_out_dir}/libavformat.so.61
-        ${_out_dir}/libavformat.so.61.1.100
         ${_out_dir}/libavcodec.so
         ${_out_dir}/libavcodec.so.61
         ${_out_dir}/libavcodec.so.61.3.100
@@ -1324,8 +1285,6 @@ endif ()
 
 if (CMAKE_SYSTEM_NAME STREQUAL "Linux")
     set(LIBRARY_FILES
-    ${LIBDIR_BIN}/libavformat.so.61
-    ${LIBDIR_BIN}/libavformat.so.61.1.100
     ${LIBDIR_BIN}/libavcodec.so.61
     ${LIBDIR_BIN}/libavcodec.so.61.3.100
     ${LIBDIR_BIN}/libavutil.so.59

deps/CMakeLists.txt

@@ -156,7 +156,7 @@ if (NOT _is_multi AND NOT CMAKE_BUILD_TYPE)
 endif ()
 
 function(orcaslicer_add_cmake_project projectname)
-    cmake_parse_arguments(P_ARGS "FORWARD_CONFIG" "INSTALL_DIR;BUILD_COMMAND;INSTALL_COMMAND;SOURCE_DIR" "CMAKE_ARGS" ${ARGN})
+    cmake_parse_arguments(P_ARGS "FORWARD_CONFIG" "INSTALL_DIR;BUILD_COMMAND;INSTALL_COMMAND" "CMAKE_ARGS" ${ARGN})
 
     # MSVC is true for clang-cl as well, so the sub-build toolchain has to key on the
     # generator. A non-Visual-Studio superbuild passes its own generator down, and with
@@ -202,18 +202,12 @@ function(orcaslicer_add_cmake_project projectname)
       set(_build_j "-j${NPROC}")
     endif ()
 
-    set(_source_dir_arg "")
-    if (P_ARGS_SOURCE_DIR)
-        set(_source_dir_arg SOURCE_DIR ${P_ARGS_SOURCE_DIR})
-    endif ()
-
 if (NOT IS_CROSS_COMPILE OR NOT APPLE)
     ExternalProject_Add(
         dep_${projectname}
         EXCLUDE_FROM_ALL    ON
         INSTALL_DIR         ${DESTDIR}
         DOWNLOAD_DIR        ${DEP_DOWNLOAD_DIR}/${projectname}
-        ${_source_dir_arg}
         ${_gen}
         CMAKE_ARGS
             -DCMAKE_POLICY_VERSION_MINIMUM=3.5
@@ -246,14 +240,12 @@ if (NOT IS_CROSS_COMPILE OR NOT APPLE)
         # note for future devs: shared libs may actually create a size reduction
         # but orcaslicer_deps tends to get really funny regarding linking after that (notably boost)
         # so, as much as I would like to use that, it's not happening
-        if (NOT P_ARGS_SOURCE_DIR)
-            ExternalProject_Add_Step(dep_${projectname} free_download_space
-                    DEPENDEES download # do after download
-                    COMMENT "Freeing Space: Removing source archive"
-                    WORKING_DIRECTORY ${DEP_DOWNLOAD_DIR}
-                    COMMAND ${CMAKE_COMMAND} -E rm -rf ${projectname}
-            )
-        endif ()
+        ExternalProject_Add_Step(dep_${projectname} free_download_space
+                DEPENDEES download # do after download
+                COMMENT "Freeing Space: Removing source archive"
+                WORKING_DIRECTORY ${DEP_DOWNLOAD_DIR}
+                COMMAND ${CMAKE_COMMAND} -E rm -r ${projectname}
+        )
         ExternalProject_Add_Step(dep_${projectname} free_build_space
                 DEPENDEES install # do after install
                 COMMENT "Freeing Space: Removing source and build files"
@@ -267,7 +259,6 @@ else()
         EXCLUDE_FROM_ALL    ON
         INSTALL_DIR         ${DESTDIR}
         DOWNLOAD_DIR        ${DEP_DOWNLOAD_DIR}/${projectname}
-        ${_source_dir_arg}
         ${_gen}
         CMAKE_ARGS
             -DCMAKE_POLICY_VERSION_MINIMUM=3.5
@@ -395,6 +386,10 @@ include(libnoise/libnoise.cmake)
 
 include(Draco/Draco.cmake)
 
+include(FFMPEG/FFMPEG.cmake)
+include(Assimp/Assimp.cmake)
+
+
 # I *think* 1.1 is used for *just* md5 hashing?
 # 3.1 has everything in the right place, but the md5 funcs used are deprecated
 # a grep across the repo shows it is used for other things
@@ -405,12 +400,6 @@ if(NOT OPENSSL_FOUND)
     set(OPENSSL_PKG dep_OpenSSL)
 endif()
 
-include(FFMPEG/FFMPEG.cmake)
-include(Assimp/Assimp.cmake)
-
-include(DataChannel/DataChannel.cmake)
-set(DATACHANNEL_PKG dep_DataChannel)
-
 # we don't want to load a "wrong" openssl when loading curl
 # so, just don't even bother
 # ...i think this is how it works? change if wrong
@@ -484,7 +473,6 @@ set(_dep_list
     dep_wxInspector
     dep_FFMPEG
     dep_Assimp
-    ${DATACHANNEL_PKG}
     )
 
 if (MSVC)

deps/DataChannel/DataChannel.cmake

@@ -1,37 +0,0 @@
-# libdatachannel is the native ICE/DTLS/SCTP implementation used by the
-# GUI WebRTC camera controller. Keep the source revision fixed: the signaling
-# protocol is evolving independently of this transport dependency.
-#
-# It vendors plog, usrsctp and libjuice as git submodules, which a plain
-# GitHub tag tarball does not include. The flatpak sandbox has no network
-# access during the build, so there the manifest itself clones the repo
-# (submodules and all) into the dependency download directory before the
-# sandbox closes. ExternalProject_Add is pointed at that existing checkout
-# instead of being given its own network-dependent download method.
-if (FLATPAK)
-    set(_datachannel_source
-        SOURCE_DIR ${DEP_DOWNLOAD_DIR}/DataChannel
-    )
-else()
-    set(_datachannel_source
-        GIT_REPOSITORY https://github.com/paullouisageneau/libdatachannel.git
-        GIT_TAG v0.24.5
-        GIT_SHALLOW ON
-        GIT_SUBMODULES_RECURSE ON
-    )
-endif()
-
-orcaslicer_add_cmake_project(DataChannel
-    DEPENDS ${OPENSSL_PKG}
-    CMAKE_ARGS
-        -DNO_EXAMPLES=ON
-        -DNO_TESTS=ON
-        -DNO_WEBSOCKET=ON
-        -DNO_MEDIA=ON
-        -DUSE_NICE=OFF
-        -DUSE_SYSTEM_JUICE=OFF
-        -DUSE_SYSTEM_USRSCTP=OFF
-        -DOPENSSL_ROOT_DIR:PATH=${DESTDIR}
-        -DOPENSSL_USE_STATIC_LIBS=ON
-    ${_datachannel_source}
-)

deps/FFMPEG/FFMPEG.cmake

@@ -1,26 +1,14 @@
 set(_conf_cmd ./configure)
 
-set(_ffmpeg_depends)
-set(_ffmpeg_configure_command ${_conf_cmd})
-if (TARGET dep_OpenSSL)
-    set(_ffmpeg_depends DEPENDS dep_OpenSSL)
-    set(_ffmpeg_configure_command
-        ${CMAKE_COMMAND} -E env
-        "PKG_CONFIG_PATH=${DESTDIR}/lib/pkgconfig:$ENV{PKG_CONFIG_PATH}"
-        ${_conf_cmd}
-    )
-endif()
-
 if (MSVC)
     set(_source_dir "${CMAKE_BINARY_DIR}/dep_FFMPEG-prefix/src/dep_FFMPEG")
 
-    set(PREBUILD_URL_arm64 "https://github.com/Noisyfox/FFmpeg-Builds-Orca/releases/download/autobuild-2026-09-18-16-50/ffmpeg-n7.0.3-33-g887d4b4919-winarm64-orca-shared-7.0.zip")
-    set(PREBUILD_HASH_arm64 "da480cbb39680056de824c57ec4dc3bd577b479ebbc310ff1f9dc55cf014b4c1")
-    set(PREBUILD_URL_x64 "https://github.com/Noisyfox/FFmpeg-Builds-Orca/releases/download/autobuild-2026-09-18-16-50/ffmpeg-n7.0.3-33-g887d4b4919-win64-orca-shared-7.0.zip")
-    set(PREBUILD_HASH_x64 "85da19daf198f5548259d8aabb349db84997a3f6e6886d8d7764114add9c6dae")
+    set(PREBUILD_URL_arm64 "https://github.com/Noisyfox/FFmpeg-Builds-Orca/releases/download/autobuild-2026-07-17-14-28/ffmpeg-n7.0.3-31-g9b6ffd74b5-winarm64-orca-shared-7.0.zip")
+    set(PREBUILD_HASH_arm64 "12f4140279f2f8469885e1b5b2e8be9d788882914c21523cacd56989f3548054")
+    set(PREBUILD_URL_x64 "https://github.com/Noisyfox/FFmpeg-Builds-Orca/releases/download/autobuild-2026-07-17-14-28/ffmpeg-n7.0.3-31-g9b6ffd74b5-win64-orca-shared-7.0.zip")
+    set(PREBUILD_HASH_x64 "e65916020ddb9ef84b2666dfbcbfc9b1d67f69d15b4a66db53754637bf2d498c")
 
     ExternalProject_Add(dep_FFMPEG
-        ${_ffmpeg_depends}
         URL ${PREBUILD_URL_${DEPS_ARCH}}
         URL_HASH SHA256=${PREBUILD_HASH_${DEPS_ARCH}}
         DOWNLOAD_DIR ${DEP_DOWNLOAD_DIR}/FFMPEG
@@ -33,8 +21,6 @@ if (MSVC)
     )
 
 else ()
-    set(_openssl_cmd --enable-openssl)
-
     if (APPLE)
         set(_minos_cmd
             "--extra-cflags=-mmacosx-version-min=${DEP_OSX_TARGET}"
@@ -66,11 +52,10 @@ else ()
     endif()
 
     ExternalProject_Add(dep_FFMPEG
-        ${_ffmpeg_depends}
         URL https://github.com/FFmpeg/FFmpeg/archive/refs/tags/n7.0.3.tar.gz
         URL_HASH SHA256=DEEDCABE339165214A3637DF4C86A507AEF0D793CF8774FF68735F4737E8DDBC
         DOWNLOAD_DIR ${DEP_DOWNLOAD_DIR}/FFMPEG
-        CONFIGURE_COMMAND ${_ffmpeg_configure_command}
+        CONFIGURE_COMMAND ${_conf_cmd}
             ${_cross_cmd}
             ${_pic_cmd}
             ${_arch_cmd}
@@ -78,21 +63,20 @@ else ()
             "--prefix=${DESTDIR}"
             ${_link_cmd}
             ${_minos_cmd}
-            ${_openssl_cmd}
             --disable-doc
             --enable-small
             --disable-outdevs
             --disable-filters
             --enable-filter=*null*,afade,*fifo,*format,*resample,aeval,allrgb,allyuv,atempo,pan,*bars,color,*key,crop,draw*,eq*,framerate,*_qsv,*_vaapi,*v4l2*,hw*,scale,volume,test*
             --disable-protocols
-            --enable-protocol=file,fd,pipe,http,https,rtp,tcp,udp
+            --enable-protocol=file,fd,pipe,rtp,udp
             --disable-muxers
             --enable-muxer=rtp
             --disable-encoders
             --disable-decoders
             --enable-decoder=*aac*,h264*,mp3*,mjpeg,rv*
             --disable-demuxers
-            --enable-demuxer=h264,mp3,mov,mpjpeg,rtsp,sdp
+            --enable-demuxer=h264,mp3,mov
             --disable-zlib
             --disable-avdevice
         BUILD_IN_SOURCE ON

docs/HLSD/deferred-page-construction.md

@@ -0,0 +1,220 @@
+# Deferred Page Construction: High Level Design
+
+## Why it exists
+
+The main window is a notebook of tabs. When the first frame appears, one tab is on
+screen and the others are not; some of them are opened later in the session, some
+never, and some only exist for certain printers. Building a tab before the first frame
+adds its cost to every startup, whether or not the tab is used.
+
+This subsystem builds a tab's panel the first time the tab is shown. It also builds the
+remaining tabs while the user is idle after startup, in units of tens of milliseconds,
+so a click that lands in the middle of one waits for that unit and no longer. Startup
+pays only for what the first frame shows, and the other tabs are usually built before
+anyone opens them.
+
+## The parts
+
+`src/slic3r/GUI/Lazy.hpp`, `LazyPage.hpp`, `StagedBuild.hpp` and `IdleScheduler.hpp/.cpp`
+(with its wx-free `PrebuildQueue.hpp`) are independent. A holder can hold anything a
+factory makes, a page is a holder with a placeholder widget, a staged object can live
+outside a holder, and the scheduler knows none of them; it runs tasks, which `MainFrame`
+makes from the holders.
+
+### Lazy<T>: the holder
+
+Holds an object that a factory makes on first use, under a name for the log and a place
+in the idle queue, both given by the owner. The header has no wx dependency; the busy
+cursor for an on-demand build lives in `Lazy.cpp` and is skipped when there is no app,
+so the holder is unit-tested.
+
+- `get()` is null until the object is completely built; `built()` says the same.
+- `ensure()` builds whatever is left now, under a busy cursor, and returns the object, or
+  null in the two cases below. A click on an unbuilt tab or a first open of a dialog goes
+  through this, and it logs the units and time it took.
+- `build_step()` runs one unit of construction and returns true while more remain. The
+  first unit is the factory call, and each later unit is one `StagedBuild` step if the
+  type has them.
+- `when_built(fn)` runs `fn(object)` now if it exists, otherwise once it is built.
+- `pending()` says whether the idle prebuild has work here: not built, and the factory
+  has not returned null. A null factory result is logged and the holder stays unbuilt.
+- A unit that pumps the event loop cannot re-enter the holder; a nested `build_step()`
+  does nothing and a nested `ensure()` returns null.
+- After a unit throws, the holder and the scheduler still run the next one.
+
+The holder does not own the object; its wx parent does, as for any window. A type with
+one instance in the app derives from `LazyInstance<T>`, which points at that instance's
+holder (the holder registers itself, and a recreated `MainFrame`'s holder replaces the
+old frame's) and gives the type the static entry points the rest of the app uses,
+`T::if_built()`, `T::ensure()` and `T::when_built(fn)`. They return null, or do
+nothing, while no holder exists, so a caller needs no `mainframe` check.
+
+`built()` is an atomic flag, since a job worker reads it through the statics
+(`MainFrame::get_calibration_curr_tab()`); it is set after the object is complete.
+
+`LazyBase` is the holder's type-free interface (`name()`, `built()`, `pending()`,
+`build_step()`, `prebuild_order()`) and is what the scheduler side sees.
+
+### LazyPage<Panel>: the placeholder
+
+A `wxPanel` placed in the parent in place of the real panel, and a `Lazy<Panel>` whose
+factory makes the panel inside it (by default `new Panel(parent)`). The notebook needs a
+page object for the tab to exist and for `show_device()` to insert and remove tabs by
+pointer, and the placeholder is that object. `MainFrame` creates every page once, named
+after its `TAB_ID_*`, and keeps it for the frame's life; `show_device()` only moves
+pages in and out of the book.
+
+- `Show()` is forwarded to the panel, so a panel's own `Show()` override stays its
+  activation hook (refresh timers, machine sync) and `SelectPageByName()` works
+  unchanged. A show builds the panel unless the frame itself is still hidden, because
+  the book selects its first page as it is inserted; `MainFrame::Show()` shows the
+  current page again when the frame becomes visible, which builds it.
+- `in_book()` says whether the parent notebook currently lists the page, and
+  `pending()` is that and not built, so a tab `show_device()` has taken out of the book
+  is not prebuilt.
+- A panel built while its page is hidden stays hidden, and a completed panel gets the
+  dark-mode pass the frame ran before it existed.
+
+The Compare presets dialog is a holder without a page. `MainFrame` keeps a
+`Lazy<DiffPresetDialog>` whose factory constructs the dialog and binds its events, the
+dialog derives from `LazyInstance`, and its callers use
+`DiffPresetDialog::ensure()->show()` and `DiffPresetDialog::if_built()` like a tab's
+callers do. Saving a preset refreshes the dialog only while it is shown, since `show()`
+reloads the presets.
+
+### StagedBuild: construction in units
+
+A mixin for a panel whose constructor is too big to be one unit. The constructor builds
+the skeleton (sizers, and the parts other code may touch) and queues the rest with
+`add_build_step()`. `build_step()` runs one step, and `add_build_steps_of(child)`
+forwards a child's steps so a nested panel is spread the same way; the parent is built
+only once the child is, including steps the child queues later. Steps run in order, on
+the main thread. A `Lazy<T>` recognises a staged type at compile time and runs its steps
+one per unit.
+
+Nothing may touch what a step builds before the last step has run. In practice:
+
+- nothing paints the panel before it is complete, since a panel built at idle is hidden
+  with its page and one built on demand finishes inside `ensure()` before the event loop
+  runs again;
+- members created in steps are initialised to null in the header, so a partially built
+  panel can be destroyed;
+- timers and event handlers that use step content check `built()` first
+  (`MonitorPanel::update_all()`, `CalibrationPanel::update_all()`), and a child's steps
+  are queued before anything in the constructor can fire such a handler;
+- a destructor that disconnects from step content checks `built()` first;
+- a constructor or step does not take focus while the panel is off screen
+  (`IsShownOnScreen()` before `SetFocus()`), since it may run while the user is typing
+  elsewhere;
+- where a step's widgets must keep their place in a sizer that later steps also fill, the
+  constructor adds an empty slot sizer in that position and the step fills the slot
+  (`StatusBasePanel`).
+
+### IdleScheduler: when to build
+
+A task is any `LazyBase`: a name for the log, `pending()`, `build_step()` and
+`prebuild_order()`. `PrebuildQueue` holds the tasks by order (equal order in the order
+added) and runs a slice, the units of the first pending task until it completes, the
+budget is spent on the clock it is given, or the interrupt predicate says input arrived.
+It has no wx dependency and is unit-tested with a fake clock. A task whose work is gone
+is passed over and stays in the queue, so a tab that `show_device()` removes and later
+re-inserts is pending again.
+
+`IdleScheduler` drives the queue with the real clock, the app's input timestamp and the
+Windows queue check, and logs each unit and slice. Each slice is a timer message: a
+period of 250 ms while waiting for the user to go quiet, and a one-shot of zero after a
+slice that left work, so the event loop dispatches whatever it has queued (paint,
+timers, input) before the next slice runs. Chaining slices with `CallAfter` would not do
+this: wx drains pending events fully before the next native message, on every platform.
+On GTK the one-shot is 5 ms, because a due GLib timeout runs ahead of the redraw and
+idle sources that paint and deliver posted events.
+A slice runs only once the user has been idle for the quiet time, and the timer stops
+itself once no task is pending. The tick period, quiet time and slice length are
+constants in `IdleScheduler.cpp`. A unit cannot be interrupted once started, so the
+largest unit bounds click latency on Windows; on the other platforms a click also waits
+for the rest of the slice. A unit that pumps the event loop lets the timer fire inside
+its own slice, and that tick does nothing.
+
+The tasks are made by their owners. `MainFrame::prebuild_pages_when_idle()` registers
+every `LazyPage` the frame created, in or out of the book (`pending()` is false for a
+page out of the book), the Compare presets holder, and the Prepare sidebar's settings
+page from `ParamsPanel::settings_page_prebuild()`, whose first unit selects the default
+tab if none is selected yet and whose later units build one option group each.
+`show_device()` only restarts the timer. `MainFrame` owns the scheduler because it owns
+everything the tasks build, and clearing the queue with the frame is what keeps a task
+from outliving its object.
+
+Idle time comes from `GUI_App::FilterEvent`, which timestamps mouse and keyboard events
+(`wxEVT_CATEGORY_USER_INPUT` minus command events, which all claim that category), and
+`GUI_App::input_idle_ms()` reports it. On Windows a slice additionally refuses to start
+when the message queue holds keyboard, button, touch or pen input. Mouse moves are
+excluded because Windows synthesises one whenever a window appears under the cursor,
+which every unit does. Other platforms use the timestamp alone.
+
+Once every registered page is built the timer is stopped and the subsystem costs
+nothing.
+
+## Rules
+
+**What builds before the first frame.** The Prepare tab's plater, because `post_init()`
+needs its GL canvas on screen to initialise OpenGL in every startup state, and the start
+page the user configured. Home is built by the first `MainFrame::Show()`, Prepare's
+settings page by selecting the tab. `post_init()` passes through the Prepare tab for GL
+init under `Freeze()` with `MainFrame::select_prepare_for_gl_init()`, which changes the
+selection without the page-changed event, so nothing else is built for that pass.
+
+**Reaching a lazy object.** A caller uses the type's own statics. `T::if_built()` may
+return null and is for telling the object something it can live without (a rescale, a
+colour change, a status update). `T::ensure()` builds the object and is for navigating
+to it or for a caller that is about to show it. A caller that tells the object something
+it would not fetch for itself on construction uses `T::when_built()`, which keeps the
+message until the object exists. A panel that pulls its state when constructed (the Home
+page requests the recent list on load, the Device tab reads the device manager on show)
+is reached with `if_built()`; one that cannot pull gets `when_built()`.
+
+**Unit size.** A unit cannot be interrupted, so it should stay within the slice length on
+a fast machine. A constructor above that is staged. A single widget above it is the
+floor unless the widget itself is split.
+
+**Order.** Cheapest and most likely to be opened first, given where `MainFrame` creates
+each holder. The settings page is 0 (the Prepare tab's own content), Home 10, Device 20
+(a Bambu user's usual second stop), Calibration 30, Multi-device 40, the web Device
+view 50, Project 60 (a second WebView2 instance) and the Compare presets dialog 100;
+steps of ten so a new tab takes a value between its neighbours without renumbering
+them. `MainFrame::prebuild_pages_when_idle()` registers the tasks once, from
+`post_init()`.
+
+**Never prebuilt.** A holder with a negative order, for a tab that few sessions open
+and that costs more to build unasked than it saves (the Design tab), and plugin-provided
+tabs, which are Python-side and not lazy pages.
+
+## Adopting it
+
+A lazy tab needs:
+
+1. The panel derived from `LazyInstance<Panel>`, since a tab's panel has one instance.
+2. A `LazyPage<Panel>*` member in `MainFrame`, created once in `init_tabpanel()` with
+   its `TAB_ID_*` as the name, its place by the order rule (and a factory if
+   `new Panel(parent)` is not enough), added to `m_lazy_pages`, and used wherever the
+   tab is added to or looked up in the notebook.
+3. Every use of the panel outside `MainFrame` going through one of the panel's statics,
+   chosen by the rule above. When converting an existing member, `grep` for it; the
+   compiler finds the rest.
+4. A constructor that copes with the frame already existing and the user being busy
+   elsewhere, since `wxGetApp().mainframe` is set, the frame may be shown, and the user
+   may be typing when a lazy panel is built: no `SetFocus()` while off screen, and
+   whatever the constructor did through a `MainFrame` accessor before (a mode update, a
+   deferred URL) done in the constructor itself.
+
+To stage a heavy constructor, inherit `StagedBuild`, keep the skeleton in the constructor,
+move the rest into `add_build_step()` lambdas in the original order, and follow the
+staged-panel rules above. Measure the units. A step that is still one big widget has to
+be split inside that widget or accepted as the floor.
+
+Verification is by log. `MainFrame::prebuild_pages_when_idle` lists the queue it
+registered, `IdleScheduler::tick` reports each completed task by name at info level and
+each slice and unit at debug level, and `Lazy::ensure` reports an object a user built
+on demand with the units and time it took. A run from the configured start
+page shows every registered page complete, in order, with no unit longer than intended.
+A click on a tab mid-prebuild shows the finished panel with an `ensure` line for what was
+left, and the slices resume for the remaining tasks once the user is idle again.

docs/HLSD/printer-agent.md

@@ -1,279 +0,0 @@
-# Printer agents
-
-Printer agents isolate printer-specific communication from the rest of OrcaSlicer. The GUI and
-`DeviceManager` operate on a shared set of printer operations and device state; a selected printer
-agent implements those operations for a particular printer ecosystem. The agent boundary allows
-Bambu, Moonraker-based printers, built-in integrations, and Python-provided integrations to use the
-same application workflow without making the GUI understand every printer protocol.
-
-The current boundary is an adapter boundary around the existing application contract. In particular,
-some request fields and message payloads still use the Bambu-shaped representation that existing
-`MachineObject` and `DeviceManager` code consumes. The printer agent is responsible for translating
-that representation into the protocol spoken by its printer. This is an intentional compatibility
-constraint of the current design; the interface is not yet a neutral printer protocol.
-
-The v1 dialect migration path is deliberately narrow. `DeviceManager` currently speaks the Bambu JSON
-dialect because that is the payload shape already used throughout the command and state workflow. The
-v1 `OrcaPrinterAgent` also accepts that Bambu dialect. Its transport path places the small translation
-needed for the target printer at `deliver_to_sink`, keeping the compatibility code at the edge rather
-than spreading it through `DeviceManager` or the agent interface.
-
-The eventual direction is for `DeviceManager` to produce an Orca JSON dialect. The Bambu agent will then
-own the translation from Orca JSON to Bambu's protocol, while `OrcaPrinterAgent` can forward the Orca
-payload directly to its sink. The v1 translation at `deliver_to_sink` can then be removed without
-changing `DeviceManager`, the command callers, or the rest of the agent workflow.
-
-## Components
-
-The system has four relevant layers:
-
-```text
-GUI / DeviceManager / MachineObject
-              |
-        NetworkAgent
-          /       \
- IPrinterAgent   ICloudServiceAgent
-      |                 |
- printer protocol   authentication and cloud services
-```
-
-### `DeviceManager` and `MachineObject`
-
-`DeviceManager` owns the application-facing printer workflow. It maintains `MachineObject` instances,
-updates their state, filters devices for the active printer agent, and initiates operations such as
-homing, temperature changes, printing, subscriptions, and camera playback.
-
-`MachineObject` remains the shared state model used by the GUI. It does not contain the implementation
-of a printer protocol. When a device is discovered or returned by a cloud query, the device is tagged
-with the active `printer_agent_id`. Device lists and selected-machine operations use that tag to avoid
-sending an operation through an agent that does not own the device.
-
-### `NetworkAgent`
-
-`NetworkAgent` is the façade used by the GUI and `DeviceManager`. It owns:
-
-- the currently selected `IPrinterAgent`;
-- the registered cloud-service instances, indexed by provider;
-- callbacks shared by the active printer agent and the application;
-- the forwarding methods for printer commands and cloud operations.
-
-There is one active printer agent for the currently selected printer preset. Switching the preset
-increments the machine-list generation, disconnects the old printer agent, removes its callbacks, and
-installs the newly selected agent. The façade then forwards printer operations to that agent.
-
-Cloud operations are selected separately using a provider key. `NetworkAgent` forwards a cloud request
-to the matching `ICloudServiceAgent`, and forwards cloud camera operations with a device ID. The
-printer agent receives a cloud-agent pointer through `set_cloud_agent()` when it is created, allowing
-printer communication to obtain cloud tokens without depending on a concrete cloud implementation.
-
-### `IPrinterAgent`
-
-`IPrinterAgent` is the printer-facing contract. It covers:
-
-- cloud-relay and direct-LAN message delivery;
-- LAN connection, discovery, binding, and certificates;
-- printer subscriptions and callbacks;
-- print operations;
-- filament synchronization;
-- camera capability and local camera URL reporting;
-- printer command methods.
-
-Concrete built-in implementations include the Bambu wrapper, the native Orca/Moonraker path, and
-other printer-agent implementations registered by the application. A printer agent may use either
-the cloud agent, a direct LAN connection, or both.
-
-### `ICloudServiceAgent`
-
-`ICloudServiceAgent` owns authentication and services provided by a cloud backend. It covers login
-state, tokens, user and printer lists, settings synchronization, model services, cloud messages, and
-cloud camera operations.
-
-Cloud camera operations are device-scoped:
-
-- `get_camera_url(dev_id, callback)` obtains a stream URL for one device;
-- `create_camera_signaling_channel(dev_id)` creates signaling for one device where the provider
-  supports it.
-
-This is separate from the local camera URL exposed by `IPrinterAgent`, which is currently scoped to
-the active printer agent because a normal LAN agent represents one physical printer connection.
-
-## Agent registration and selection
-
-`NetworkAgentFactory` maintains the printer-agent registry. Each registry entry contains an agent ID,
-a display name, and a factory function. Built-in agents register during application initialization.
-Python printer-agent capabilities register dynamically and contribute an agent ID and factory entry.
-
-The selected printer preset contains the printer-agent choice. If no explicit choice is stored, the
-application preserves the existing default behavior: Bambu presets select the Bambu agent and other
-presets select the native Orca agent. When a preset is changed, `GUI_App` resolves the effective agent
-ID, obtains the corresponding cloud agent, creates the printer agent through the registry, and installs
-it in `NetworkAgent`.
-
-The registry rejects conflicting agent IDs. This matters for Python plugins because an agent ID is the
-stable identity used by presets and device ownership; two enabled plugin capabilities must not claim
-the same ID.
-
-## Message and command flow
-
-There are two low-level message paths:
-
-- `send_message()` publishes a command through the printer's cloud relay;
-- `send_message_to_printer()` sends a command directly to the printer over the LAN path.
-
-Both paths accept a JSON string, quality-of-service and flag values, and return the existing network
-status code domain. The agent owns the conversion from that JSON contract to its native transport.
-
-The typed `command_*` methods are the application-facing convenience layer. The five generic defaults
-currently implemented by `IPrinterAgent` construct the existing JSON dialect and route through the
-same message path:
-
-| Method | Default operation |
-| --- | --- |
-| `command_xyz_abs()` | Send `G90` for absolute positioning |
-| `command_auto_leveling()` | Send `G29` for bed leveling |
-| `command_go_home()` | Use the supported homing operation or send `G28` |
-| `command_set_bed()` | Use the supported bed control or send `M140` |
-| `command_set_nozzle()` | Send `M104` for nozzle temperature |
-
-These are compatibility defaults for common printer workflows, not a guarantee that every firmware
-implements every command identically. An agent can override a method when its protocol needs another
-operation. For example, a Klipper configuration may use `BED_MESH_CALIBRATE` instead of `G29`.
-
-The remaining common command methods default to `ORCA_NETWORK_ERR_CMD_NOT_SUPPORTED` because their
-existing behavior is vendor-specific or has no portable implementation:
-
-- AMS RFID refresh;
-- AMS calibration;
-- AMS tray selection;
-- camera start;
-- axis control.
-
-The methods remain on the common interface so an agent that supports them can override them explicitly.
-`sequence_id` remains part of the command contract because `DeviceManager` creates and tracks it as
-the command ID.
-
-## Filament and AMS synchronization
-
-The `OrcaPrinterAgent` bridges OrcaSonar's filament/AMS state. Its capability reply
-carries two independent signals: `protocol.features.fms` means a material system resolves,
-and `protocol.features.filament_slots` means the connector owns a filament-slot model that
-persists without any material hardware. Either one enables filament synchronization, so a
-printer with slots but no AMS still exposes the slot workflow. The agent also caches
-`protocol.ams_ops`, the canonical material write operations the resolved drivers implement,
-and uses it to gate AMS writes; `print.ams_filament_setting` is exempt because it persists
-connector state and is advertised by `filament_slots` alone. A write whose operation is not
-declared is refused with `CAP_NOT_AVAILABLE` before it reaches the wire.
-
-Printer state arrives as the pushed `ams`/`vir_slot` projection inside `push_status`; the
-Orca agent does not poll the Moonraker `lane_data` namespace, which exists for
-Moonraker-channel consumers. Slot presence is the user's declaration, not sensed material:
-`tray_exist_bits` and the presence of a `vir_slot` entry mark a slot as present even with an
-empty `tray_type`, which is the `is_exists` state the filament UI reads. A full status frame
-(`msg=0`, or a LAN frame with no `msg`) is authoritative for removals, so a virtual tray id
-absent from a populated `vir_slot` is dropped; a delta frame (`msg=1`) only updates the
-entries it names and leaves omitted entries held.
-
-Writes follow the same edge-translation rule as the rest of the agent. The shared
-`MachineObject` command builders emit Bambu-shaped `print.ams_*` payloads, and the agent's
-single send funnel decodes them into OrcaSonar's canonical bodies — `selector` with a flat
-lane or `ams_id`/`slot_id` coordinates for `ams_change_filament`, coordinates for
-`ams_filament_setting` — before publishing. The server resolves and rejects with its own
-`errno` backstop; the agent only withholds operations the device did not declare.
-
-A filament frame can arrive before the capability reply that decides synchronization mode,
-for example when the topology bootstraps after connect or Klipper restarts. While a device's
-capabilities are still unknown, the agent re-requests `get_capabilities` and a full status on
-a filament frame, throttled per device, and stops once an answer arrives. Dedicated
-capability state is cleared when a cloud device is deselected, while an independently active
-LAN session for the same device id keeps its declaration.
-
-## Device ownership and stale responses
-
-Printer-agent ownership is represented by `printer_agent_id` on device records and `MachineObject`
-instances. The active agent ID is attached when a device is discovered, returned by a cloud list, or
-reused after a preset switch. Local-machine configuration also persists the agent ID so a saved LAN
-device is not silently reused by an unrelated agent.
-
-Cloud printer-list responses carry three pieces of request context added by `NetworkAgent`:
-
-```text
-provider   cloud provider used for the request
-agent_id   active printer agent when the request was made
-generation machine-list generation when the request was made
-```
-
-`DeviceManager` accepts the response only when those values still match the current provider, active
-agent, and generation. This prevents a slow response from the previous preset or provider from
-repopulating the current device list.
-
-The provider mapping is currently selected by `GUI_App`: the Bambu agent maps to the Bambu cloud
-provider and other agents map to the Orca cloud provider. The generation check protects that existing
-selection from races; it does not make cloud-provider ownership intrinsic to an agent. Cloud-printer
-ownership and the broader Orca cloud services are therefore still separate architectural concerns.
-
-## Python printer agents
-
-`PrinterAgentPluginCapability` implements `IPrinterAgent` directly. The live capability object is
-registered with `NetworkAgentFactory` and handed out as the printer agent when its agent ID is selected.
-The plugin receives the selected `ICloudServiceAgent` through `set_cloud_agent()` just like a built-in
-printer agent.
-
-Python plugins must implement the core communication and lifecycle methods required by the interface,
-including agent metadata, printer connection, discovery callbacks, and the two message-send methods.
-Methods that are meaningful only to a particular printer are optional overrides where the C++ base
-class provides a default.
-
-All ten `command_*` methods are available in the Python binding and in the trampoline. Their override
-status is intentionally optional:
-
-- the five generic commands use the C++ default when Python does not override them;
-- the five vendor-specific commands return `NOT_SUPPORTED` unless Python supplies an implementation;
-- a Python implementation can replace either behavior for its own protocol.
-
-The Python camera binding exposes HTTP, HTTPS, RTSP, and HTTP-snapshot modes. WebRTC remains a
-built-in C++ camera mode, but is not exposed as a Python mode because the current Python capability
-does not provide the corresponding cloud signaling-channel contract.
-
-## Camera playback boundary
-
-The camera stream mode describes how a stream is obtained; it does not by itself define ownership of
-the wxWidgets view that renders it. `MediaPlayCtrl` selects and tears down the active backend, while
-the wx parent owns the child window or renderer. This is important because a web view, native media
-control, and frame-based/WebRTC renderer have different wx window-lifetime requirements.
-
-Cloud URL and signaling requests are routed through `NetworkAgent` to the cloud provider selected for
-the device. Local URL requests are routed to the active printer agent. The distinction keeps cloud
-account services device-scoped while preserving the current one-LAN-agent/one-printer model.
-
-## Compatibility constraints
-
-The printer-agent boundary intentionally preserves several existing application contracts:
-
-- Bambu-shaped JSON is still the shared command representation;
-- existing network status codes are reused, with Orca-specific unsupported/capability errors added
-  in the Orca-reserved range;
-- `MachineObject` remains the shared device-state model;
-- preset and local-machine data retain compatibility with the existing agent-selection behavior;
-- Python plugins use the existing capability and pybind11 registration system.
-
-The agent abstraction is therefore responsible for containing vendor differences, not for pretending
-that all vendor protocols are identical. The planned Orca JSON dialect is the protocol-neutral command
-model for the `DeviceManager`/agent boundary. Once it is introduced, Bambu-specific translation remains
-inside the Bambu agent and the Orca agent's v1 sink adapter can be removed as a self-contained cleanup.
-
-## Main implementation locations
-
-- [`IPrinterAgent`](../../src/slic3r/Utils/IPrinterAgent.hpp) — printer-agent contract and generic command defaults
-- [`ICloudServiceAgent`](../../src/slic3r/Utils/ICloudServiceAgent.hpp) — cloud service and per-device
-  cloud camera contract
-- [`NetworkAgent`](../../src/slic3r/Utils/NetworkAgent.hpp) — façade and dispatch between active agents
-- [`NetworkAgentFactory`](../../src/slic3r/Utils/NetworkAgentFactory.hpp) — built-in and Python agent registry
-- [`OrcaPrinterAgent`](../../src/slic3r/Utils/OrcaPrinterAgent.hpp) — OrcaSonar transport, capability
-  discovery, and Bambu-to-canonical command translation
-- [`AmsPayload`](../../src/slic3r/Utils/AmsPayload.hpp) — shared filament payload rendering and the
-  per-device AMS capability cache
-- [`DeviceManager`](../../src/slic3r/GUI/DeviceCore/DevManager.cpp) — device ownership, filtering, and
-  stale-response checks
-- [`PrinterAgentPluginCapability`](../../src/slic3r/plugin/pluginTypes/printerAgent/PrinterAgentPluginCapability.cpp)
-  — Python bindings
-- [`MediaPlayCtrl`](../../src/slic3r/GUI/MediaPlayCtrl.cpp) — camera backend selection and playback lifecycle

resources/profiles/Sovol.json

@@ -1,7 +1,7 @@
 {
 	"name": "Sovol",
 	"url": "",
-	"version": "02.04.00.04",
+	"version": "02.04.00.07",
 	"force_update": "0",
 	"description": "Sovol configurations",
 	"machine_model_list": [
@@ -167,10 +167,6 @@
 			"name": "0.20mm Standard @Sovol SV08 MAX 0.4 nozzle",
 			"sub_path": "process/0.20mm Standard @Sovol SV08 MAX 0.4 nozzle.json"
 		},
-		{
-			"name": "0.20mm Standard @Sovol Zero 0.4 nozzle",
-			"sub_path": "process/0.20mm Standard @Sovol Zero 0.4 nozzle.json"
-		},
 		{
 			"name": "0.28mm Fast @Sovol SV06 ACE",
 			"sub_path": "process/0.28mm Fast @Sovol SV06 ACE 0.4 nozzle.json"
@@ -198,6 +194,74 @@
 		{
 			"name": "0.40mm Standard @Sovol SV08 MAX 0.8 nozzle",
 			"sub_path": "process/0.40mm Standard @Sovol SV08 MAX 0.8 nozzle.json"
+		},
+		{
+			"name": "fdm_process_zero",
+			"sub_path": "process/fdm_process_zero.json"
+		},
+		{
+			"name": "0.06mm Quality @Sovol Zero 0.2 nozzle",
+			"sub_path": "process/0.06mm Quality @Sovol Zero 0.2 nozzle.json"
+		},
+		{
+			"name": "0.10mm Standard @Sovol Zero 0.2 nozzle",
+			"sub_path": "process/0.10mm Standard @Sovol Zero 0.2 nozzle.json"
+		},
+		{
+			"name": "0.12mm Quality @Sovol Zero 0.4 nozzle",
+			"sub_path": "process/0.12mm Quality @Sovol Zero 0.4 nozzle.json"
+		},
+		{
+			"name": "0.14mm Fast @Sovol Zero 0.2 nozzle",
+			"sub_path": "process/0.14mm Fast @Sovol Zero 0.2 nozzle.json"
+		},
+		{
+			"name": "0.15mm Quality @Sovol Zero 0.6 nozzle",
+			"sub_path": "process/0.15mm Quality @Sovol Zero 0.6 nozzle.json"
+		},
+		{
+			"name": "0.20mm Quality @Sovol Zero 0.8 nozzle",
+			"sub_path": "process/0.20mm Quality @Sovol Zero 0.8 nozzle.json"
+		},
+		{
+			"name": "0.20mm Standard @Sovol Zero 0.4 nozzle",
+			"sub_path": "process/0.20mm Standard @Sovol Zero 0.4 nozzle.json"
+		},
+		{
+			"name": "0.25mm Quality @Sovol Zero 1.0 nozzle",
+			"sub_path": "process/0.25mm Quality @Sovol Zero 1.0 nozzle.json"
+		},
+		{
+			"name": "0.25mm SPEEDBENCHY @Sovol Zero 0.4 nozzle",
+			"sub_path": "process/0.25mm SPEEDBENCHY @Sovol Zero 0.4 nozzle.json"
+		},
+		{
+			"name": "0.28mm Fast @Sovol Zero 0.4 nozzle",
+			"sub_path": "process/0.28mm Fast @Sovol Zero 0.4 nozzle.json"
+		},
+		{
+			"name": "0.30mm Standard @Sovol Zero 0.6 nozzle",
+			"sub_path": "process/0.30mm Standard @Sovol Zero 0.6 nozzle.json"
+		},
+		{
+			"name": "0.40mm Standard @Sovol Zero 0.8 nozzle",
+			"sub_path": "process/0.40mm Standard @Sovol Zero 0.8 nozzle.json"
+		},
+		{
+			"name": "0.42mm Fast @Sovol Zero 0.6 nozzle",
+			"sub_path": "process/0.42mm Fast @Sovol Zero 0.6 nozzle.json"
+		},
+		{
+			"name": "0.50mm Standard @Sovol Zero 1.0 nozzle",
+			"sub_path": "process/0.50mm Standard @Sovol Zero 1.0 nozzle.json"
+		},
+		{
+			"name": "0.56mm Fast @Sovol Zero 0.8 nozzle",
+			"sub_path": "process/0.56mm Fast @Sovol Zero 0.8 nozzle.json"
+		},
+		{
+			"name": "0.70mm Fast @Sovol Zero 1.0 nozzle",
+			"sub_path": "process/0.70mm Fast @Sovol Zero 1.0 nozzle.json"
 		}
 	],
 	"filament_list": [
@@ -249,6 +313,10 @@
 			"name": "Generic PETG @Sovol Zero",
 			"sub_path": "filament/Generic PETG @Sovol Zero.json"
 		},
+		{
+			"name": "Generic PETG @Sovol Zero Hardened Steel nozzle",
+			"sub_path": "filament/Generic PETG @Sovol Zero Hardened Steel nozzle.json"
+		},
 		{
 			"name": "Generic PLA @Sovol SV06 ACE",
 			"sub_path": "filament/Generic PLA @Sovol SV06 ACE.json"
@@ -277,6 +345,14 @@
 			"name": "Generic PLA @Sovol Zero",
 			"sub_path": "filament/Generic PLA @Sovol Zero.json"
 		},
+		{
+			"name": "Generic PLA @Sovol Zero Hardened Steel nozzle",
+			"sub_path": "filament/Generic PLA @Sovol Zero Hardened Steel nozzle.json"
+		},
+		{
+			"name": "Generic PLA SPEEDBENCHY @Sovol Zero",
+			"sub_path": "filament/Generic PLA SPEEDBENCHY @Sovol Zero.json"
+		},
 		{
 			"name": "Generic PLA Silk @Sovol SV08 MAX",
 			"sub_path": "filament/Generic PLA Silk @Sovol SV08 MAX.json"
@@ -285,6 +361,10 @@
 			"name": "Generic PLA Silk @Sovol Zero",
 			"sub_path": "filament/Generic PLA Silk @Sovol Zero.json"
 		},
+		{
+			"name": "Generic PLA Silk @Sovol Zero Hardened Steel nozzle",
+			"sub_path": "filament/Generic PLA Silk @Sovol Zero Hardened Steel nozzle.json"
+		},
 		{
 			"name": "Generic TPU @Sovol SV06 ACE",
 			"sub_path": "filament/Generic TPU @Sovol SV06 ACE.json"
@@ -312,18 +392,6 @@
 		{
 			"name": "SUNLU PETG @Sovol SV08 MAX",
 			"sub_path": "filament/SUNLU PETG @Sovol SV08 MAX.json"
-		},
-		{
-			"name": "Sovol Zero PETG HS Nozzle",
-			"sub_path": "filament/Sovol Zero PETG HS Nozzle.json"
-		},
-		{
-			"name": "Sovol Zero PLA Basic HS Nozzle",
-			"sub_path": "filament/Sovol Zero PLA Basic HS Nozzle.json"
-		},
-		{
-			"name": "Sovol Zero PLA Silk HS Nozzle",
-			"sub_path": "filament/Sovol Zero PLA Silk HS Nozzle.json"
 		}
 	],
 	"machine_list": [
@@ -415,9 +483,45 @@
 			"name": "Sovol SV08 MAX 0.8 nozzle",
 			"sub_path": "machine/Sovol SV08 MAX 0.8 nozzle.json"
 		},
+		{
+			"name": "Sovol Zero 0.2 nozzle",
+			"sub_path": "machine/Sovol Zero 0.2 nozzle.json"
+		},
 		{
 			"name": "Sovol Zero 0.4 nozzle",
 			"sub_path": "machine/Sovol Zero 0.4 nozzle.json"
+		},
+		{
+			"name": "Sovol Zero 0.6 nozzle",
+			"sub_path": "machine/Sovol Zero 0.6 nozzle.json"
+		},
+		{
+			"name": "Sovol Zero 0.8 nozzle",
+			"sub_path": "machine/Sovol Zero 0.8 nozzle.json"
+		},
+		{
+			"name": "Sovol Zero 1.0 nozzle",
+			"sub_path": "machine/Sovol Zero 1.0 nozzle.json"
+		},
+		{
+			"name": "Sovol Zero 0.2 Hardened Steel nozzle",
+			"sub_path": "machine/Sovol Zero 0.2 Hardened Steel nozzle.json"
+		},
+		{
+			"name": "Sovol Zero 0.4 Hardened Steel nozzle",
+			"sub_path": "machine/Sovol Zero 0.4 Hardened Steel nozzle.json"
+		},
+		{
+			"name": "Sovol Zero 0.6 Hardened Steel nozzle",
+			"sub_path": "machine/Sovol Zero 0.6 Hardened Steel nozzle.json"
+		},
+		{
+			"name": "Sovol Zero 0.8 Hardened Steel nozzle",
+			"sub_path": "machine/Sovol Zero 0.8 Hardened Steel nozzle.json"
+		},
+		{
+			"name": "Sovol Zero 1.0 Hardened Steel nozzle",
+			"sub_path": "machine/Sovol Zero 1.0 Hardened Steel nozzle.json"
 		}
 	]
 }

resources/profiles/Sovol/filament/Generic ABS @Sovol Zero.json

@@ -1,10 +1,11 @@
 {
 	"type": "filament",
 	"name": "Generic ABS @Sovol Zero",
-	"inherits": "Generic ABS @System",
 	"renamed_from": "Sovol Zero ABS",
+	"inherits": "fdm_filament_abs",
 	"from": "system",
 	"setting_id": "g6sSyyIFYJUzlXsp",
+	"filament_id": "OFY9muEs",
 	"instantiation": "true",
 	"filament_flow_ratio": [
 		"0.98"
@@ -73,6 +74,39 @@
 		"0"
 	],
 	"compatible_printers": [
-		"Sovol Zero 0.4 nozzle"
+		"Sovol Zero 0.2 nozzle",
+		"Sovol Zero 0.4 nozzle",
+		"Sovol Zero 0.6 nozzle",
+		"Sovol Zero 0.8 nozzle",
+		"Sovol Zero 1.0 nozzle",
+		"Sovol Zero 0.2 Hardened Steel nozzle",
+		"Sovol Zero 0.4 Hardened Steel nozzle",
+		"Sovol Zero 0.6 Hardened Steel nozzle",
+		"Sovol Zero 0.8 Hardened Steel nozzle",
+		"Sovol Zero 1.0 Hardened Steel nozzle"
+	],
+	"cool_plate_temp": [
+		"80"
+	],
+	"eng_plate_temp": [
+		"80"
+	],
+	"textured_plate_temp": [
+		"80"
+	],
+	"cool_plate_temp_initial_layer": [
+		"80"
+	],
+	"eng_plate_temp_initial_layer": [
+		"80"
+	],
+	"textured_plate_temp_initial_layer": [
+		"80"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_density": [
+		"1.10"
 	]
 }

resources/profiles/Sovol/filament/Generic PC @Sovol Zero.json

@@ -1,11 +1,12 @@
 {
 	"type": "filament",
+	"filament_id": "OFLakOUI",
+	"setting_id": "yRKCiPMN6fxibcyg",
 	"name": "Generic PC @Sovol Zero",
-	"inherits": "Generic PC @System",
 	"renamed_from": "Sovol Zero PC",
 	"from": "system",
-	"setting_id": "yRKCiPMN6fxibcyg",
 	"instantiation": "true",
+	"inherits": "fdm_filament_pc",
 	"filament_flow_ratio": [
 		"0.98"
 	],
@@ -13,7 +14,16 @@
 		"21"
 	],
 	"compatible_printers": [
-		"Sovol Zero 0.4 nozzle"
+		"Sovol Zero 0.2 nozzle",
+		"Sovol Zero 0.4 nozzle",
+		"Sovol Zero 0.6 nozzle",
+		"Sovol Zero 0.8 nozzle",
+		"Sovol Zero 1.0 nozzle",
+		"Sovol Zero 0.2 Hardened Steel nozzle",
+		"Sovol Zero 0.4 Hardened Steel nozzle",
+		"Sovol Zero 0.6 Hardened Steel nozzle",
+		"Sovol Zero 0.8 Hardened Steel nozzle",
+		"Sovol Zero 1.0 Hardened Steel nozzle"
 	],
 	"nozzle_temperature_initial_layer": [
 		"290"
@@ -51,7 +61,9 @@
 	"slow_down_min_speed": [
 		"10"
 	],
-	"dont_slow_down_outer_wall": "0",
+	"dont_slow_down_outer_wall": [
+		"0"
+	],
 	"overhang_fan_speed": [
 		"20"
 	],
@@ -61,8 +73,19 @@
 	"temperature_vitrification": [
 		"60"
 	],
-	"additional_cooling_fan_speed": "0",
-	"activate_air_filtration": "1",
-	"during_print_exhaust_fan_speed": "50",
-	"complete_print_exhaust_fan_speed": "50"
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"activate_air_filtration": [
+		"1"
+	],
+	"during_print_exhaust_fan_speed": [
+		"50"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"50"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	]
 }

resources/profiles/Sovol/filament/Generic PETG @Sovol Zero Hardened Steel nozzle.json

@@ -0,0 +1,116 @@
+{
+	"type": "filament",
+	"filament_id": "OFYPdQJh",
+	"setting_id": "d9QbCESNz3ZLU6eu",
+	"name": "Generic PETG @Sovol Zero Hardened Steel nozzle",
+	"renamed_from": "Sovol Zero PETG HS Nozzle",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_filament_pet",
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"pressure_advance": [
+		"0.048"
+	],
+	"filament_max_volumetric_speed": [
+		"15"
+	],
+	"nozzle_temperature_initial_layer": [
+		"265"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"nozzle_temperature_range_low": [
+		"230"
+	],
+	"nozzle_temperature_range_high": [
+		"280"
+	],
+	"hot_plate_temp": [
+		"85"
+	],
+	"hot_plate_temp_initial_layer": [
+		"85"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"fan_max_speed": [
+		"40"
+	],
+	"fan_cooling_layer_time": [
+		"50"
+	],
+	"full_fan_speed_layer": [
+		"3"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"overhang_fan_speed": [
+		"70"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"filament_retraction_length": [
+		"0.5"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"activate_air_filtration": [
+		"1"
+	],
+	"during_print_exhaust_fan_speed": [
+		"50"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"50"
+	],
+	"compatible_printers": [
+		"Sovol Zero 0.2 Hardened Steel nozzle",
+		"Sovol Zero 0.4 Hardened Steel nozzle",
+		"Sovol Zero 0.6 Hardened Steel nozzle",
+		"Sovol Zero 0.8 Hardened Steel nozzle",
+		"Sovol Zero 1.0 Hardened Steel nozzle"
+	],
+	"cool_plate_temp": [
+		"85"
+	],
+	"eng_plate_temp": [
+		"85"
+	],
+	"textured_plate_temp": [
+		"85"
+	],
+	"cool_plate_temp_initial_layer": [
+		"85"
+	],
+	"eng_plate_temp_initial_layer": [
+		"85"
+	],
+	"textured_plate_temp_initial_layer": [
+		"85"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/Sovol/filament/Generic PETG @Sovol Zero.json

@@ -1,16 +1,21 @@
 {
 	"type": "filament",
+	"filament_id": "OFYPdQJh",
+	"setting_id": "i4OW2eAtXOKdtVNj",
 	"name": "Generic PETG @Sovol Zero",
-	"inherits": "Generic PETG @System",
 	"renamed_from": "Sovol Zero PETG",
 	"from": "system",
-	"setting_id": "i4OW2eAtXOKdtVNj",
 	"instantiation": "true",
+	"inherits": "fdm_filament_pet",
 	"filament_flow_ratio": [
 		"1.0348"
 	],
-	"enable_pressure_advance": "1",
-	"pressure_advance": "0.046",
+	"enable_pressure_advance": [
+		"1"
+	],
+	"pressure_advance": [
+		"0.046"
+	],
 	"filament_max_volumetric_speed": [
 		"15"
 	],
@@ -68,10 +73,44 @@
 	"filament_z_hop": [
 		"0.4"
 	],
-	"activate_air_filtration": "1",
-	"during_print_exhaust_fan_speed": "50",
-	"complete_print_exhaust_fan_speed": "50",
+	"activate_air_filtration": [
+		"1"
+	],
+	"during_print_exhaust_fan_speed": [
+		"50"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"50"
+	],
 	"compatible_printers": [
-		"Sovol Zero 0.4 nozzle"
+		"Sovol Zero 0.2 nozzle",
+		"Sovol Zero 0.4 nozzle",
+		"Sovol Zero 0.6 nozzle",
+		"Sovol Zero 0.8 nozzle",
+		"Sovol Zero 1.0 nozzle"
+	],
+	"cool_plate_temp": [
+		"85"
+	],
+	"eng_plate_temp": [
+		"85"
+	],
+	"textured_plate_temp": [
+		"85"
+	],
+	"cool_plate_temp_initial_layer": [
+		"85"
+	],
+	"eng_plate_temp_initial_layer": [
+		"85"
+	],
+	"textured_plate_temp_initial_layer": [
+		"85"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
 	]
 }

resources/profiles/Sovol/filament/Generic PLA @Sovol Zero Hardened Steel nozzle.json

@@ -0,0 +1,110 @@
+{
+	"type": "filament",
+	"filament_id": "OFDSrzZ8",
+	"setting_id": "nZgETe4CTpicEjQX",
+	"name": "Generic PLA @Sovol Zero Hardened Steel nozzle",
+	"renamed_from": "Sovol Zero PLA Basic HS Nozzle",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_filament_pla",
+	"filament_flow_ratio": [
+		"1.0348"
+	],
+	"filament_max_volumetric_speed": [
+		"21"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"pressure_advance": [
+		"0.03"
+	],
+	"compatible_printers": [
+		"Sovol Zero 0.2 Hardened Steel nozzle",
+		"Sovol Zero 0.4 Hardened Steel nozzle",
+		"Sovol Zero 0.6 Hardened Steel nozzle",
+		"Sovol Zero 0.8 Hardened Steel nozzle",
+		"Sovol Zero 1.0 Hardened Steel nozzle"
+	],
+	"nozzle_temperature_initial_layer": [
+		"245"
+	],
+	"nozzle_temperature": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"nozzle_temperature_range_high": [
+		"250"
+	],
+	"hot_plate_temp": [
+		"65"
+	],
+	"hot_plate_temp_initial_layer": [
+		"65"
+	],
+	"fan_min_speed": [
+		"70"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_cooling_layer_time": [
+		"80"
+	],
+	"full_fan_speed_layer": [
+		"3"
+	],
+	"slow_down_layer_time": [
+		"5"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"dont_slow_down_outer_wall": [
+		"0"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"additional_cooling_fan_speed": [
+		"75%"
+	],
+	"activate_air_filtration": [
+		"1"
+	],
+	"during_print_exhaust_fan_speed": [
+		"80%"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80%"
+	],
+	"cool_plate_temp": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/Sovol/filament/Generic PLA @Sovol Zero.json

@@ -1,21 +1,24 @@
 {
 	"type": "filament",
+	"filament_id": "OFDSrzZ8",
+	"setting_id": "NNDerIjh7qtuh1I3",
 	"name": "Generic PLA @Sovol Zero",
-	"inherits": "Generic PLA @System",
 	"renamed_from": "Sovol Zero PLA Basic",
 	"from": "system",
-	"setting_id": "NNDerIjh7qtuh1I3",
 	"instantiation": "true",
+	"inherits": "fdm_filament_pla",
 	"filament_flow_ratio": [
 		"0.98"
 	],
 	"filament_max_volumetric_speed": [
-		"21"
+		"25"
 	],
-	"enable_pressure_advance": "1",
-	"pressure_advance": "0.032",
 	"compatible_printers": [
-		"Sovol Zero 0.4 nozzle"
+		"Sovol Zero 0.2 nozzle",
+		"Sovol Zero 0.4 nozzle",
+		"Sovol Zero 0.6 nozzle",
+		"Sovol Zero 0.8 nozzle",
+		"Sovol Zero 1.0 nozzle"
 	],
 	"nozzle_temperature_initial_layer": [
 		"230"
@@ -24,28 +27,28 @@
 		"210"
 	],
 	"nozzle_temperature_range_low": [
-		"190"
+		"180"
 	],
 	"nozzle_temperature_range_high": [
-		"250"
+		"240"
 	],
 	"hot_plate_temp": [
-		"65"
+		"60"
 	],
 	"hot_plate_temp_initial_layer": [
-		"65"
+		"60"
 	],
 	"fan_min_speed": [
-		"70"
+		"100"
 	],
 	"fan_max_speed": [
 		"100"
 	],
 	"fan_cooling_layer_time": [
-		"80"
+		"60"
 	],
 	"full_fan_speed_layer": [
-		"3"
+		"2"
 	],
 	"slow_down_layer_time": [
 		"5"
@@ -53,18 +56,43 @@
 	"slow_down_min_speed": [
 		"10"
 	],
-	"dont_slow_down_outer_wall": "0",
 	"overhang_fan_speed": [
 		"100"
 	],
 	"overhang_fan_threshold": [
-		"50%"
+		"10%"
 	],
 	"temperature_vitrification": [
+		"50"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_retraction_length": [
+		"0.4"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"cool_plate_temp": [
 		"60"
 	],
-	"additional_cooling_fan_speed": "75%",
-	"activate_air_filtration": "1",
-	"during_print_exhaust_fan_speed": "80%",
-	"complete_print_exhaust_fan_speed": "80%"
+	"eng_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
 }

resources/profiles/Sovol/filament/Generic PLA SPEEDBENCHY @Sovol Zero.json

@@ -0,0 +1,118 @@
+{
+	"type": "filament",
+	"filament_id": "OFIUkWYN",
+	"setting_id": "MC2InZ7iKDjIGike",
+	"name": "Generic PLA SPEEDBENCHY @Sovol Zero",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_filament_pla",
+	"filament_flow_ratio": [
+		"1"
+	],
+	"filament_max_volumetric_speed": [
+		"50"
+	],
+	"compatible_printers": [
+		"Sovol Zero 0.4 nozzle",
+		"Sovol Zero 0.4 Hardened Steel nozzle"
+	],
+	"nozzle_temperature_initial_layer": [
+		"245"
+	],
+	"nozzle_temperature": [
+		"225"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"nozzle_temperature_range_high": [
+		"250"
+	],
+	"hot_plate_temp": [
+		"65"
+	],
+	"hot_plate_temp_initial_layer": [
+		"65"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"pressure_advance": [
+		"0.032"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"full_fan_speed_layer": [
+		"3"
+	],
+	"slow_down_layer_time": [
+		"1.7"
+	],
+	"slow_down_min_speed": [
+		"40"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"75%"
+	],
+	"additional_cooling_fan_speed": [
+		"100"
+	],
+	"filament_z_hop": [
+		"0"
+	],
+	"filament_retraction_length": [
+		"0.35"
+	],
+	"filament_retraction_speed": [
+		"90"
+	],
+	"filament_deretraction_speed": [
+		"90"
+	],
+	"filament_retract_before_wipe": [
+		"0%"
+	],
+	"filament_wipe_distance": [
+		"2"
+	],
+	"filament_retract_when_changing_layer": [
+		"0"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"cool_plate_temp": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	],
+	"temperature_vitrification": [
+		"100"
+	]
+}

resources/profiles/Sovol/filament/Generic PLA Silk @Sovol Zero Hardened Steel nozzle.json

@@ -0,0 +1,110 @@
+{
+	"type": "filament",
+	"filament_id": "OFesA6rF",
+	"setting_id": "LA8X1RsMdV2xNT1o",
+	"name": "Generic PLA Silk @Sovol Zero Hardened Steel nozzle",
+	"renamed_from": "Sovol Zero PLA Silk HS Nozzle",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_filament_pla",
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"15"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"pressure_advance": [
+		"0.027"
+	],
+	"compatible_printers": [
+		"Sovol Zero 0.2 Hardened Steel nozzle",
+		"Sovol Zero 0.4 Hardened Steel nozzle",
+		"Sovol Zero 0.6 Hardened Steel nozzle",
+		"Sovol Zero 0.8 Hardened Steel nozzle",
+		"Sovol Zero 1.0 Hardened Steel nozzle"
+	],
+	"nozzle_temperature_initial_layer": [
+		"245"
+	],
+	"nozzle_temperature": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"nozzle_temperature_range_high": [
+		"250"
+	],
+	"hot_plate_temp": [
+		"65"
+	],
+	"hot_plate_temp_initial_layer": [
+		"65"
+	],
+	"fan_min_speed": [
+		"70"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_cooling_layer_time": [
+		"80"
+	],
+	"full_fan_speed_layer": [
+		"3"
+	],
+	"slow_down_layer_time": [
+		"5"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"dont_slow_down_outer_wall": [
+		"0"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"additional_cooling_fan_speed": [
+		"75%"
+	],
+	"activate_air_filtration": [
+		"1"
+	],
+	"during_print_exhaust_fan_speed": [
+		"80%"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80%"
+	],
+	"cool_plate_temp": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/Sovol/filament/Generic PLA Silk @Sovol Zero.json

@@ -1,27 +1,30 @@
 {
 	"type": "filament",
+	"filament_id": "OFesA6rF",
+	"setting_id": "Se2yKerHRStYtWf5",
 	"name": "Generic PLA Silk @Sovol Zero",
-	"inherits": "Generic PLA Silk @System",
 	"renamed_from": "Sovol Zero PLA Silk",
 	"from": "system",
-	"setting_id": "Se2yKerHRStYtWf5",
 	"instantiation": "true",
-	"filament_multitool_ramming_flow": [
-		"20"
-	],
-	"filament_retraction_length": [
-		"nil"
-	],
+	"inherits": "fdm_filament_pla",
 	"filament_flow_ratio": [
 		"0.98"
 	],
 	"filament_max_volumetric_speed": [
 		"15"
 	],
-	"enable_pressure_advance": "1",
-	"pressure_advance": "0.029",
+	"enable_pressure_advance": [
+		"1"
+	],
+	"pressure_advance": [
+		"0.029"
+	],
 	"compatible_printers": [
-		"Sovol Zero 0.4 nozzle"
+		"Sovol Zero 0.2 nozzle",
+		"Sovol Zero 0.4 nozzle",
+		"Sovol Zero 0.6 nozzle",
+		"Sovol Zero 0.8 nozzle",
+		"Sovol Zero 1.0 nozzle"
 	],
 	"nozzle_temperature_initial_layer": [
 		"245"
@@ -59,7 +62,9 @@
 	"slow_down_min_speed": [
 		"10"
 	],
-	"dont_slow_down_outer_wall": "0",
+	"dont_slow_down_outer_wall": [
+		"0"
+	],
 	"overhang_fan_speed": [
 		"100"
 	],
@@ -69,8 +74,43 @@
 	"temperature_vitrification": [
 		"60"
 	],
-	"additional_cooling_fan_speed": "75%",
-	"activate_air_filtration": "1",
-	"during_print_exhaust_fan_speed": "80%",
-	"complete_print_exhaust_fan_speed": "80%"
+	"additional_cooling_fan_speed": [
+		"75%"
+	],
+	"activate_air_filtration": [
+		"1"
+	],
+	"during_print_exhaust_fan_speed": [
+		"80%"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80%"
+	],
+	"filament_multitool_ramming_flow": [
+		"20"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"cool_plate_temp": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
 }

resources/profiles/Sovol/filament/Generic TPU @Sovol Zero.json

@@ -1,11 +1,12 @@
 {
 	"type": "filament",
+	"filament_id": "OFgbpcy9",
+	"setting_id": "MlY6WQ41FE8zDPSV",
 	"name": "Generic TPU @Sovol Zero",
-	"inherits": "Generic TPU @System",
 	"renamed_from": "Sovol Zero TPU",
 	"from": "system",
-	"setting_id": "MlY6WQ41FE8zDPSV",
 	"instantiation": "true",
+	"inherits": "fdm_filament_tpu",
 	"filament_flow_ratio": [
 		"0.98"
 	],
@@ -60,11 +61,55 @@
 	"filament_z_hop": [
 		"0.4"
 	],
-	"additional_cooling_fan_speed": "50",
-	"activate_air_filtration": "1",
-	"during_print_exhaust_fan_speed": "100",
-	"complete_print_exhaust_fan_speed": "50",
+	"additional_cooling_fan_speed": [
+		"50"
+	],
+	"activate_air_filtration": [
+		"1"
+	],
+	"during_print_exhaust_fan_speed": [
+		"100"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"50"
+	],
 	"compatible_printers": [
-		"Sovol Zero 0.4 nozzle"
+		"Sovol Zero 0.2 nozzle",
+		"Sovol Zero 0.4 nozzle",
+		"Sovol Zero 0.6 nozzle",
+		"Sovol Zero 0.8 nozzle",
+		"Sovol Zero 1.0 nozzle",
+		"Sovol Zero 0.2 Hardened Steel nozzle",
+		"Sovol Zero 0.4 Hardened Steel nozzle",
+		"Sovol Zero 0.6 Hardened Steel nozzle",
+		"Sovol Zero 0.8 Hardened Steel nozzle",
+		"Sovol Zero 1.0 Hardened Steel nozzle"
+	],
+	"cool_plate_temp": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"cool_plate_temp_initial_layer": [
+		"55"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
 	]
 }

resources/profiles/Sovol/filament/Sovol Zero PETG HS Nozzle.json

@@ -1,77 +0,0 @@
-{
-	"type": "filament",
-	"name": "Sovol Zero PETG HS Nozzle",
-	"inherits": "Generic PETG @System",
-	"from": "system",
-	"setting_id": "AfxHmpdOkMDJa2fk",
-	"filament_id": "OFymnal9",
-	"instantiation": "true",
-	"filament_flow_ratio": [
-		"0.98"
-	],
-	"enable_pressure_advance": "1",
-	"pressure_advance": "0.048",
-	"filament_max_volumetric_speed": [
-		"15"
-	],
-	"nozzle_temperature_initial_layer": [
-		"265"
-	],
-	"nozzle_temperature": [
-		"250"
-	],
-	"nozzle_temperature_range_low": [
-		"230"
-	],
-	"nozzle_temperature_range_high": [
-		"280"
-	],
-	"hot_plate_temp": [
-		"85"
-	],
-	"hot_plate_temp_initial_layer": [
-		"85"
-	],
-	"fan_min_speed": [
-		"10"
-	],
-	"fan_max_speed": [
-		"40"
-	],
-	"fan_cooling_layer_time": [
-		"50"
-	],
-	"full_fan_speed_layer": [
-		"3"
-	],
-	"slow_down_layer_time": [
-		"10"
-	],
-	"slow_down_min_speed": [
-		"10"
-	],
-	"overhang_fan_speed": [
-		"70"
-	],
-	"overhang_fan_threshold": [
-		"10%"
-	],
-	"temperature_vitrification": [
-		"60"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"filament_retraction_length": [
-		"0.5"
-	],
-	"filament_z_hop": [
-		"0.4"
-	],
-	"activate_air_filtration": "1",
-	"during_print_exhaust_fan_speed": "50",
-	"complete_print_exhaust_fan_speed": "50",
-	"compatible_printers": [
-		"Sovol Zero 0.4 nozzle"
-	]
-}

resources/profiles/Sovol/filament/Sovol Zero PLA Basic HS Nozzle.json

@@ -1,70 +0,0 @@
-{
-	"type": "filament",
-	"name": "Sovol Zero PLA Basic HS Nozzle",
-	"inherits": "Generic PLA @System",
-	"from": "system",
-	"setting_id": "i9wDnSEIrOBPbOZl",
-	"filament_id": "OFzB4uOs",
-	"instantiation": "true",
-	"filament_flow_ratio": [
-		"1.0348"
-	],
-	"filament_max_volumetric_speed": [
-		"21"
-	],
-	"enable_pressure_advance": "1",
-	"pressure_advance": "0.03",
-	"compatible_printers": [
-		"Sovol Zero 0.4 nozzle"
-	],
-	"nozzle_temperature_initial_layer": [
-		"245"
-	],
-	"nozzle_temperature": [
-		"230"
-	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
-	"nozzle_temperature_range_high": [
-		"250"
-	],
-	"hot_plate_temp": [
-		"65"
-	],
-	"hot_plate_temp_initial_layer": [
-		"65"
-	],
-	"fan_min_speed": [
-		"70"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_cooling_layer_time": [
-		"80"
-	],
-	"full_fan_speed_layer": [
-		"3"
-	],
-	"slow_down_layer_time": [
-		"5"
-	],
-	"slow_down_min_speed": [
-		"10"
-	],
-	"dont_slow_down_outer_wall": "0",
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"temperature_vitrification": [
-		"60"
-	],
-	"additional_cooling_fan_speed": "75%",
-	"activate_air_filtration": "1",
-	"during_print_exhaust_fan_speed": "80%",
-	"complete_print_exhaust_fan_speed": "80%"
-}

resources/profiles/Sovol/filament/Sovol Zero PLA Silk HS Nozzle.json

@@ -1,70 +0,0 @@
-{
-	"type": "filament",
-	"name": "Sovol Zero PLA Silk HS Nozzle",
-	"inherits": "Generic PLA @System",
-	"from": "system",
-	"setting_id": "XxEJBNFLRltR2Xwn",
-	"filament_id": "OFAO9A7J",
-	"instantiation": "true",
-	"filament_flow_ratio": [
-		"0.98"
-	],
-	"filament_max_volumetric_speed": [
-		"15"
-	],
-	"enable_pressure_advance": "1",
-	"pressure_advance": "0.027",
-	"compatible_printers": [
-		"Sovol Zero 0.4 nozzle"
-	],
-	"nozzle_temperature_initial_layer": [
-		"245"
-	],
-	"nozzle_temperature": [
-		"230"
-	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
-	"nozzle_temperature_range_high": [
-		"250"
-	],
-	"hot_plate_temp": [
-		"65"
-	],
-	"hot_plate_temp_initial_layer": [
-		"65"
-	],
-	"fan_min_speed": [
-		"70"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_cooling_layer_time": [
-		"80"
-	],
-	"full_fan_speed_layer": [
-		"3"
-	],
-	"slow_down_layer_time": [
-		"5"
-	],
-	"slow_down_min_speed": [
-		"10"
-	],
-	"dont_slow_down_outer_wall": "0",
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"temperature_vitrification": [
-		"60"
-	],
-	"additional_cooling_fan_speed": "75%",
-	"activate_air_filtration": "1",
-	"during_print_exhaust_fan_speed": "80%",
-	"complete_print_exhaust_fan_speed": "80%"
-}

resources/profiles/Sovol/machine/Sovol Zero 0.2 Hardened Steel nozzle.json

@@ -0,0 +1,19 @@
+{
+	"type": "machine",
+	"name": "Sovol Zero 0.2 Hardened Steel nozzle",
+	"inherits": "Sovol Zero 0.2 nozzle",
+	"from": "system",
+	"setting_id": "OkvEInEyzUUJzw9K",
+	"instantiation": "true",
+	"printer_model": "Sovol Zero",
+	"printer_variant": "0.2HS",
+	"nozzle_diameter": [
+		"0.2"
+	],
+	"default_filament_profile": [
+		"Generic PLA @Sovol Zero Hardened Steel nozzle"
+	],
+	"nozzle_type": [
+		"hardened_steel"
+	]
+}

resources/profiles/Sovol/machine/Sovol Zero 0.4 Hardened Steel nozzle.json

@@ -0,0 +1,19 @@
+{
+	"type": "machine",
+	"name": "Sovol Zero 0.4 Hardened Steel nozzle",
+	"inherits": "Sovol Zero 0.4 nozzle",
+	"from": "system",
+	"setting_id": "RqwHKS8MYRdoeJPi",
+	"instantiation": "true",
+	"printer_model": "Sovol Zero",
+	"printer_variant": "0.4HS",
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"default_filament_profile": [
+		"Generic PLA @Sovol Zero Hardened Steel nozzle"
+	],
+	"nozzle_type": [
+		"hardened_steel"
+	]
+}

resources/profiles/Sovol/machine/Sovol Zero 0.6 Hardened Steel nozzle.json

@@ -0,0 +1,19 @@
+{
+	"type": "machine",
+	"name": "Sovol Zero 0.6 Hardened Steel nozzle",
+	"inherits": "Sovol Zero 0.6 nozzle",
+	"from": "system",
+	"setting_id": "s3N3FJkWrzOylFm8",
+	"instantiation": "true",
+	"printer_model": "Sovol Zero",
+	"printer_variant": "0.6HS",
+	"nozzle_diameter": [
+		"0.6"
+	],
+	"default_filament_profile": [
+		"Generic PLA @Sovol Zero Hardened Steel nozzle"
+	],
+	"nozzle_type": [
+		"hardened_steel"
+	]
+}

resources/profiles/Sovol/machine/Sovol Zero 0.8 Hardened Steel nozzle.json

@@ -0,0 +1,19 @@
+{
+	"type": "machine",
+	"name": "Sovol Zero 0.8 Hardened Steel nozzle",
+	"inherits": "Sovol Zero 0.8 nozzle",
+	"from": "system",
+	"setting_id": "houacf8sQ3bLozqD",
+	"instantiation": "true",
+	"printer_model": "Sovol Zero",
+	"printer_variant": "0.8HS",
+	"nozzle_diameter": [
+		"0.8"
+	],
+	"default_filament_profile": [
+		"Generic PLA @Sovol Zero Hardened Steel nozzle"
+	],
+	"nozzle_type": [
+		"hardened_steel"
+	]
+}

resources/profiles/Sovol/machine/Sovol Zero 1.0 Hardened Steel nozzle.json

@@ -0,0 +1,19 @@
+{
+	"type": "machine",
+	"name": "Sovol Zero 1.0 Hardened Steel nozzle",
+	"inherits": "Sovol Zero 1.0 nozzle",
+	"from": "system",
+	"setting_id": "sqlEiL0in8LSjmmn",
+	"instantiation": "true",
+	"printer_model": "Sovol Zero",
+	"printer_variant": "1.0HS",
+	"nozzle_diameter": [
+		"1.0"
+	],
+	"default_filament_profile": [
+		"Generic PLA @Sovol Zero Hardened Steel nozzle"
+	],
+	"nozzle_type": [
+		"hardened_steel"
+	]
+}

resources/profiles/Sovol/machine/Sovol Zero.json

@@ -2,11 +2,11 @@
 	"type": "machine_model",
 	"name": "Sovol Zero",
 	"model_id": "Sovol-Zero",
-	"nozzle_diameter": "0.4",
+	"nozzle_diameter": "0.2;0.4;0.6;0.8;1.0;0.2HS;0.4HS;0.6HS;0.8HS;1.0HS",
 	"machine_tech": "FFF",
 	"family": "Sovol",
 	"bed_model": "sovol_zero_buildplate_model.stl",
 	"bed_texture": "sovol_zero_buildplate_texture.svg",
 	"hotend_model": "",
-	"default_materials": "Generic PLA @Sovol Zero;Sovol Zero PLA Basic HS Nozzle;Generic PLA Silk @Sovol Zero;Sovol Zero PLA Silk HS Nozzle;Generic ABS @Sovol Zero;Generic PETG @Sovol Zero;Sovol Zero PETG HS Nozzle;Generic TPU @Sovol Zero;Generic PC @Sovol Zero"
+	"default_materials": "Generic PLA @Sovol Zero;Generic PLA SPEEDBENCHY @Sovol Zero;Generic PLA @Sovol Zero Hardened Steel nozzle;Generic PLA Silk @Sovol Zero;Generic PLA Silk @Sovol Zero Hardened Steel nozzle;Generic ABS @Sovol Zero;Generic PETG @Sovol Zero;Generic PETG @Sovol Zero Hardened Steel nozzle;Generic TPU @Sovol Zero;Generic PC @Sovol Zero"
 }

resources/profiles/Sovol/process/0.06mm Quality @Sovol Zero 0.2 nozzle.json

@@ -0,0 +1,36 @@
+{
+	"type": "process",
+	"name": "0.06mm Quality @Sovol Zero 0.2 nozzle",
+	"inherits": "fdm_process_zero",
+	"from": "system",
+	"setting_id": "fWP7jaL7sJmmZ6QN",
+	"instantiation": "true",
+	"layer_height": "0.06",
+	"bottom_shell_layers": "8",
+	"bottom_shell_thickness": "0.8",
+	"bridge_speed": "30",
+	"outer_wall_acceleration": "10000",
+	"top_surface_acceleration": "5000",
+	"outer_wall_line_width": "0.21",
+	"line_width": "0.21",
+	"sparse_infill_density": "15%",
+	"inner_wall_acceleration": "12000",
+	"initial_layer_print_height": "0.06",
+	"initial_layer_line_width": "0.3",
+	"infill_wall_overlap": "18",
+	"inner_wall_line_width": "0.22",
+	"wall_loops": "3",
+	"internal_solid_infill_line_width": "0.21",
+	"sparse_infill_line_width": "0.21",
+	"support_top_z_distance": "0.10",
+	"support_line_width": "0.21",
+	"tree_support_tip_diameter": "0.21",
+	"support_speed": "100",
+	"top_surface_line_width": "0.21",
+	"top_shell_layers": "8",
+	"top_shell_thickness": "1",
+	"compatible_printers": [
+		"Sovol Zero 0.2 nozzle",
+		"Sovol Zero 0.2 Hardened Steel nozzle"
+	]
+}

resources/profiles/Sovol/process/0.10mm Standard @Sovol Zero 0.2 nozzle.json

@@ -0,0 +1,36 @@
+{
+	"type": "process",
+	"name": "0.10mm Standard @Sovol Zero 0.2 nozzle",
+	"inherits": "fdm_process_zero",
+	"from": "system",
+	"setting_id": "Gql3487jsaTXyuYZ",
+	"instantiation": "true",
+	"layer_height": "0.10",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0.8",
+	"bridge_speed": "50",
+	"outer_wall_acceleration": "10000",
+	"top_surface_acceleration": "5000",
+	"outer_wall_line_width": "0.22",
+	"line_width": "0.22",
+	"sparse_infill_density": "15%",
+	"inner_wall_acceleration": "12000",
+	"initial_layer_print_height": "0.12",
+	"initial_layer_line_width": "0.3",
+	"infill_wall_overlap": "20",
+	"inner_wall_line_width": "0.22",
+	"wall_loops": "2",
+	"internal_solid_infill_line_width": "0.22",
+	"sparse_infill_line_width": "0.22",
+	"support_top_z_distance": "0.20",
+	"support_line_width": "0.22",
+	"tree_support_tip_diameter": "0.22",
+	"support_speed": "100",
+	"top_surface_line_width": "0.22",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "1",
+	"compatible_printers": [
+		"Sovol Zero 0.2 nozzle",
+		"Sovol Zero 0.2 Hardened Steel nozzle"
+	]
+}

resources/profiles/Sovol/process/0.12mm Quality @Sovol Zero 0.4 nozzle.json

@@ -0,0 +1,35 @@
+{
+	"type": "process",
+	"setting_id": "CaEopiv2Wg6pQJjH",
+	"name": "0.12mm Quality @Sovol Zero 0.4 nozzle",
+	"from": "system",
+	"inherits": "fdm_process_zero",
+	"instantiation": "true",
+	"layer_height": "0.12",
+	"bottom_shell_layers": "8",
+	"bottom_shell_thickness": "0.8",
+	"bridge_speed": "30",
+	"outer_wall_acceleration": "10000",
+	"top_surface_acceleration": "5000",
+	"outer_wall_line_width": "0.42",
+	"line_width": "0.42",
+	"sparse_infill_density": "15%",
+	"inner_wall_acceleration": "12000",
+	"initial_layer_print_height": "0.12",
+	"initial_layer_line_width": "0.6",
+	"sparse_infill_line_width": "0.42",
+	"infill_wall_overlap": "18",
+	"inner_wall_line_width": "0.44",
+	"wall_loops": "3",
+	"support_top_z_distance": "0.10",
+	"support_line_width": "0.42",
+	"tree_support_tip_diameter": "0.42",
+	"support_speed": "100",
+	"top_surface_line_width": "0.42",
+	"internal_solid_infill_line_width": "0.42",
+	"top_shell_layers": "8",
+	"compatible_printers": [
+		"Sovol Zero 0.4 nozzle",
+		"Sovol Zero 0.4 Hardened Steel nozzle"
+	]
+}

resources/profiles/Sovol/process/0.14mm Fast @Sovol Zero 0.2 nozzle.json

@@ -0,0 +1,36 @@
+{
+	"type": "process",
+	"name": "0.14mm Fast @Sovol Zero 0.2 nozzle",
+	"inherits": "fdm_process_zero",
+	"from": "system",
+	"setting_id": "I9yoyCcGGTRrDoKu",
+	"instantiation": "true",
+	"layer_height": "0.14",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bridge_speed": "60",
+	"outer_wall_acceleration": "22000",
+	"top_surface_acceleration": "22000",
+	"outer_wall_line_width": "0.24",
+	"line_width": "0.24",
+	"sparse_infill_density": "10%",
+	"inner_wall_acceleration": "28000",
+	"initial_layer_print_height": "0.14",
+	"initial_layer_line_width": "0.3",
+	"infill_wall_overlap": "20",
+	"inner_wall_line_width": "0.24",
+	"wall_loops": "2",
+	"internal_solid_infill_line_width": "0.24",
+	"sparse_infill_line_width": "0.24",
+	"support_top_z_distance": "0.30",
+	"support_line_width": "0.24",
+	"tree_support_tip_diameter": "0.24",
+	"support_speed": "120",
+	"top_surface_line_width": "0.24",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "1",
+	"compatible_printers": [
+		"Sovol Zero 0.2 nozzle",
+		"Sovol Zero 0.2 Hardened Steel nozzle"
+	]
+}

resources/profiles/Sovol/process/0.15mm Quality @Sovol Zero 0.6 nozzle.json

@@ -0,0 +1,34 @@
+{
+	"type": "process",
+	"setting_id": "IfDpa3vM99D4ytny",
+	"name": "0.15mm Quality @Sovol Zero 0.6 nozzle",
+	"from": "system",
+	"inherits": "fdm_process_zero",
+	"instantiation": "true",
+	"layer_height": "0.15",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0.8",
+	"bridge_speed": "30",
+	"outer_wall_acceleration": "10000",
+	"top_surface_acceleration": "5000",
+	"outer_wall_line_width": "0.63",
+	"line_width": "0.63",
+	"sparse_infill_density": "15%",
+	"inner_wall_acceleration": "12000",
+	"initial_layer_line_width": "0.9",
+	"sparse_infill_line_width": "0.63",
+	"infill_wall_overlap": "18",
+	"inner_wall_line_width": "0.66",
+	"wall_loops": "3",
+	"support_top_z_distance": "0.15",
+	"support_line_width": "0.63",
+	"tree_support_tip_diameter": "0.63",
+	"support_speed": "100",
+	"top_surface_line_width": "0.63",
+	"top_shell_layers": "5",
+	"internal_solid_infill_line_width": "0.63",
+	"compatible_printers": [
+		"Sovol Zero 0.6 nozzle",
+		"Sovol Zero 0.6 Hardened Steel nozzle"
+	]
+}

resources/profiles/Sovol/process/0.20mm Quality @Sovol Zero 0.8 nozzle.json

@@ -0,0 +1,42 @@
+{
+	"type": "process",
+	"name": "0.20mm Quality @Sovol Zero 0.8 nozzle",
+	"inherits": "fdm_process_zero",
+	"from": "system",
+	"setting_id": "MSxikpQZNYdoBynZ",
+	"instantiation": "true",
+	"layer_height": "0.20",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0.8",
+	"bridge_speed": "30",
+	"outer_wall_acceleration": "10000",
+	"top_surface_acceleration": "5000",
+	"outer_wall_line_width": "0.84",
+	"line_width": "0.84",
+	"sparse_infill_density": "15%",
+	"inner_wall_acceleration": "12000",
+	"initial_layer_print_height": "0.36",
+	"initial_layer_line_width": "1.2",
+	"sparse_infill_line_width": "0.84",
+	"infill_wall_overlap": "18",
+	"inner_wall_line_width": "0.88",
+	"wall_loops": "3",
+	"support_top_z_distance": "0.20",
+	"support_line_width": "0.84",
+	"tree_support_tip_diameter": "0.84",
+	"support_speed": "100",
+	"top_surface_line_width": "0.84",
+	"top_shell_layers": "4",
+	"outer_wall_speed": "350",
+	"inner_wall_speed": "400",
+	"small_perimeter_speed": "50%",
+	"internal_solid_infill_speed": "200",
+	"internal_solid_infill_line_width": "0.84",
+	"top_surface_speed": "200",
+	"gap_infill_speed": "200",
+	"sparse_infill_speed": "500",
+	"compatible_printers": [
+		"Sovol Zero 0.8 nozzle",
+		"Sovol Zero 0.8 Hardened Steel nozzle"
+	]
+}

resources/profiles/Sovol/process/0.20mm Standard @Sovol Zero 0.4 nozzle.json

@@ -1,141 +1,36 @@
 {
 	"type": "process",
-	"name": "0.20mm Standard @Sovol Zero 0.4 nozzle",
-	"inherits": "fdm_process_common",
-	"from": "system",
 	"setting_id": "ShJTVnJ492No1j2j",
+	"name": "0.20mm Standard @Sovol Zero 0.4 nozzle",
+	"from": "system",
+	"inherits": "fdm_process_zero",
 	"instantiation": "true",
-	"reduce_crossing_wall": "1",
-	"max_travel_detour_distance": "100%",
 	"layer_height": "0.20",
-	"bottom_surface_pattern": "monotonic",
-	"bottom_shell_layers": "3",
-	"bottom_shell_thickness": "0",
-	"bridge_flow": "1.2",
-	"internal_bridge_flow": "1.2",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0.8",
 	"bridge_speed": "50",
-	"internal_bridge_speed": "200",
-	"brim_type": "auto_brim",
-	"brim_width": "5",
-	"brim_object_gap": "0",
-	"compatible_printers_condition": "",
-	"print_sequence": "by layer",
-	"default_acceleration": "40000",
 	"outer_wall_acceleration": "10000",
 	"top_surface_acceleration": "5000",
-	"bridge_no_support": "0",
-	"draft_shield": "disabled",
-	"elefant_foot_compensation": "0.1",
-	"enable_arc_fitting": "0",
-	"exclude_object": "1",
-	"outer_wall_line_width": "0.4",
-	"wall_infill_order": "inner wall/outer wall/infill",
-	"line_width": "0.4",
-	"infill_direction": "45",
-	"sparse_infill_density": "10%",
-	"sparse_infill_pattern": "grid",
-	"internal_solid_infill_acceleration": "50%",
-	"initial_layer_acceleration": "1000",
-	"initial_solid_infill_acceleration": "3000",
-	"travel_acceleration": "40000",
+	"outer_wall_line_width": "0.44",
+	"line_width": "0.44",
+	"sparse_infill_density": "15%",
 	"inner_wall_acceleration": "12000",
-	"outer_wall_jerk": "5",
-	"inner_wall_jerk": "5",
-	"infill_jerk": "5",
-	"top_surface_jerk": "5",
-	"initial_layer_jerk": "5",
-	"travel_jerk": "5",
-	"initial_layer_line_width": "0.42",
-	"initial_layer_print_height": "0.25",
-	"infill_combination": "0",
-	"sparse_infill_line_width": "0.45",
-	"infill_wall_overlap": "15%",
-	"interface_shells": "0",
-	"ironing_flow": "15%",
-	"ironing_spacing": "0.25",
-	"ironing_speed": "15",
-	"ironing_type": "no ironing",
-	"reduce_infill_retraction": "1",
-	"filename_format": "{printer_model}_{input_filename_base}_{filament_type[0]}_{layer_height}_{print_time}.gcode",
-	"detect_overhang_wall": "1",
-	"overhang_1_4_speed": "0",
-	"overhang_2_4_speed": "50",
-	"overhang_3_4_speed": "30",
-	"overhang_4_4_speed": "20",
-	"inner_wall_line_width": "0.4",
+	"initial_layer_print_height": "0.24",
+	"initial_layer_line_width": "0.6",
+	"sparse_infill_line_width": "0.44",
+	"infill_wall_overlap": "20",
+	"ironing_speed": "100",
+	"inner_wall_line_width": "0.44",
 	"wall_loops": "2",
-	"print_settings_id": "",
-	"raft_layers": "0",
-	"seam_position": "aligned",
-	"skirt_distance": "0.8",
-	"skirt_height": "1",
-	"skirt_loops": "1",
-	"minimum_sparse_infill_area": "15",
-	"internal_solid_infill_line_width": "0.45",
-	"spiral_mode": "0",
-	"standby_temperature_delta": "-5",
-	"enable_support": "0",
-	"resolution": "0.012",
-	"support_type": "tree(auto)",
-	"support_style": "default",
-	"support_on_build_plate_only": "0",
-	"support_top_z_distance": "0.235",
-	"support_bottom_z_distance": "0.235",
-	"support_filament": "0",
-	"support_line_width": "0.45",
-	"support_interface_loop_pattern": "0",
-	"support_interface_filament": "0",
-	"support_interface_top_layers": "5",
-	"support_interface_bottom_layers": "-1",
-	"support_interface_spacing": "0.2",
-	"support_bottom_interface_spacing": "0.2",
-	"support_interface_speed": "100%",
-	"support_interface_pattern": "grid",
-	"support_base_pattern": "rectilinear",
-	"support_base_pattern_spacing": "3.5",
-	"support_speed": "100",
-	"support_threshold_angle": "20",
-	"support_object_xy_distance": "0.35",
-	"tree_support_branch_angle": "40",
-	"tree_support_wall_count": "0",
-	"detect_thin_wall": "1",
-	"top_surface_pattern": "monotonic",
-	"top_surface_line_width": "0.38",
+	"support_top_z_distance": "0.20",
+	"support_line_width": "0.44",
+	"tree_support_tip_diameter": "0.44",
+	"support_speed": "60",
+	"top_surface_line_width": "0.44",
 	"top_shell_layers": "4",
-	"top_shell_thickness": "1",
-	"initial_layer_speed": "55",
-	"initial_layer_infill_speed": "105",
-	"initial_layer_travel_speed": "60%",
-	"outer_wall_speed": "350",
-	"inner_wall_speed": "400",
-	"small_perimeter_speed": "50%",
-	"internal_solid_infill_speed": "200",
-	"top_surface_speed": "200",
-	"gap_infill_speed": "200",
-	"sparse_infill_speed": "500",
-	"accel_to_decel_enable": "1",
-	"accel_to_decel_factor": "25%",
-	"travel_speed": "1000",
-	"enable_prime_tower": "1",
-	"wipe_tower_no_sparse_layers": "0",
-	"prime_tower_width": "60",
-	"xy_hole_compensation": "0",
-	"xy_contour_compensation": "0",
-	"bridge_acceleration": "50%",
-	"seam_gap": "10%",
-	"precise_outer_wall": "1",
-	"wall_generator": "classic",
-	"gcode_label_objects": "1",
-	"slow_down_layers": "3",
-	"top_solid_infill_flow_ratio": "0.9",
-	"only_one_wall_top": "1",
-	"wall_loop_direction": "clockwise",
-	"top_bottom_infill_wall_overlap": "25%",
-	"filter_out_gap_fill": "0",
-	"detect_narrow_internal_solid_infill": "1",
-	"thick_bridges": "1",
-	"bridge_angle": "0",
+	"internal_solid_infill_line_width": "0.44",
 	"compatible_printers": [
-		"Sovol Zero 0.4 nozzle"
+		"Sovol Zero 0.4 nozzle",
+		"Sovol Zero 0.4 Hardened Steel nozzle"
 	]
 }

resources/profiles/Sovol/process/0.25mm Quality @Sovol Zero 1.0 nozzle.json

@@ -0,0 +1,79 @@
+{
+	"type": "process",
+	"name": "0.25mm Quality @Sovol Zero 1.0 nozzle",
+	"inherits": "fdm_process_zero",
+	"from": "system",
+	"setting_id": "JUmnFOoEMJrbWCN9",
+	"instantiation": "true",
+	"layer_height": "0.25",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0.8",
+	"bridge_speed": "30",
+	"internal_bridge_speed": "200",
+	"default_acceleration": "40000",
+	"outer_wall_acceleration": "10000",
+	"top_surface_acceleration": "5000",
+	"outer_wall_line_width": "1.05",
+	"line_width": "1.05",
+	"sparse_infill_density": "15%",
+	"inner_wall_acceleration": "12000",
+	"initial_layer_print_height": "0.45",
+	"initial_layer_line_width": "1.5",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "1.05",
+	"infill_wall_overlap": "18",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.25",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"filename_format": "{input_filename_base}_{nozzle_diameter[0]}n_{filament_type[0]}_{layer_height}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "50",
+	"overhang_3_4_speed": "30",
+	"overhang_4_4_speed": "20",
+	"inner_wall_line_width": "1.1",
+	"wall_loops": "3",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "0.8",
+	"skirt_height": "1",
+	"skirt_loops": "1",
+	"minimum_sparse_infill_area": "15",
+	"internal_solid_infill_line_width": "1.05",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "tree(auto)",
+	"support_style": "snug",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.25",
+	"support_bottom_z_distance": "0.235",
+	"support_filament": "0",
+	"support_line_width": "1.05",
+	"tree_support_tip_diameter": "1.05",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "5",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_bottom_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_interface_pattern": "grid",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "3.5",
+	"support_speed": "100",
+	"support_threshold_angle": "50",
+	"support_object_xy_distance": "0.35",
+	"tree_support_branch_angle": "40",
+	"top_surface_line_width": "1.05",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "1",
+	"compatible_printers": [
+		"Sovol Zero 1.0 nozzle",
+		"Sovol Zero 1.0 Hardened Steel nozzle"
+	]
+}

resources/profiles/Sovol/process/0.25mm SPEEDBENCHY @Sovol Zero 0.4 nozzle.json

@@ -0,0 +1,85 @@
+{
+	"type": "process",
+	"setting_id": "oFrWcSxmad1b6sD4",
+	"name": "0.25mm SPEEDBENCHY @Sovol Zero 0.4 nozzle",
+	"from": "system",
+	"inherits": "fdm_process_zero",
+	"instantiation": "true",
+	"layer_height": "0.25",
+	"initial_layer_print_height": "0.25",
+	"line_width": "0.5",
+	"initial_layer_line_width": "0.5",
+	"outer_wall_line_width": "0.5",
+	"inner_wall_line_width": "0.5",
+	"top_surface_line_width": "0.55",
+	"internal_solid_infill_line_width": "0.55",
+	"sparse_infill_line_width": "0.55",
+	"support_line_width": "0.5",
+	"tree_support_tip_diameter": "0.5",
+	"wall_loops": "2",
+	"top_shell_layers": "3",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"sparse_infill_density": "10%",
+	"sparse_infill_pattern": "grid",
+	"bottom_solid_infill_flow_ratio": "1.2",
+	"top_solid_infill_flow_ratio": "1.4",
+	"bridge_flow": "1",
+	"internal_bridge_flow": "1",
+	"bridge_speed": "250",
+	"internal_bridge_speed": "250",
+	"bridge_acceleration": "100%",
+	"thick_bridges": "0",
+	"thick_internal_bridges": "0",
+	"brim_type": "outer_only",
+	"brim_width": "1",
+	"brim_object_gap": "0",
+	"filter_out_gap_fill": "13",
+	"gap_fill_target": "nowhere",
+	"min_width_top_surface": "200%",
+	"minimum_sparse_infill_area": "0",
+	"infill_direction": "0",
+	"solid_infill_direction": "0",
+	"infill_wall_overlap": "15%",
+	"reduce_crossing_wall": "0",
+	"skirt_loops": "0",
+	"only_one_wall_top": "1",
+	"slow_down_layers": "1",
+	"wall_direction": "cw",
+	"initial_layer_speed": "300",
+	"initial_layer_infill_speed": "300",
+	"initial_layer_travel_speed": "100%",
+	"outer_wall_speed": "350",
+	"inner_wall_speed": "400",
+	"small_perimeter_speed": "100%",
+	"internal_solid_infill_speed": "400",
+	"top_surface_speed": "300",
+	"gap_infill_speed": "350",
+	"sparse_infill_speed": "500",
+	"support_speed": "100",
+	"travel_speed": "1200",
+	"default_acceleration": "40000",
+	"initial_layer_acceleration": "20000",
+	"outer_wall_acceleration": "40000",
+	"inner_wall_acceleration": "40000",
+	"top_surface_acceleration": "20000",
+	"internal_solid_infill_acceleration": "100%",
+	"travel_acceleration": "40000",
+	"accel_to_decel_factor": "50%",
+	"outer_wall_jerk": "20",
+	"inner_wall_jerk": "20",
+	"infill_jerk": "20",
+	"top_surface_jerk": "20",
+	"initial_layer_jerk": "20",
+	"travel_jerk": "20",
+	"overhang_1_4_speed": "160",
+	"overhang_2_4_speed": "100",
+	"overhang_3_4_speed": "60",
+	"overhang_4_4_speed": "40",
+	"support_top_z_distance": "0.235",
+	"support_bottom_z_distance": "0.235",
+	"compatible_printers": [
+		"Sovol Zero 0.4 nozzle",
+		"Sovol Zero 0.4 Hardened Steel nozzle"
+	]
+}

resources/profiles/Sovol/process/0.28mm Fast @Sovol Zero 0.4 nozzle.json

@@ -0,0 +1,39 @@
+{
+	"type": "process",
+	"name": "0.28mm Fast @Sovol Zero 0.4 nozzle",
+	"inherits": "fdm_process_zero",
+	"from": "system",
+	"setting_id": "1VoML2LGDk4TJgLI",
+	"instantiation": "true",
+	"layer_height": "0.28",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bridge_speed": "60",
+	"outer_wall_acceleration": "22000",
+	"top_surface_acceleration": "22000",
+	"outer_wall_line_width": "0.48",
+	"line_width": "0.48",
+	"sparse_infill_density": "10%",
+	"inner_wall_acceleration": "28000",
+	"initial_layer_print_height": "0.28",
+	"initial_layer_line_width": "0.6",
+	"sparse_infill_line_width": "0.48",
+	"inner_wall_line_width": "0.48",
+	"internal_solid_infill_line_width": "0.48",
+	"support_top_z_distance": "0.30",
+	"support_line_width": "0.48",
+	"tree_support_tip_diameter": "0.48",
+	"support_speed": "120",
+	"top_surface_line_width": "0.48",
+	"outer_wall_speed": "350",
+	"inner_wall_speed": "400",
+	"small_perimeter_speed": "50%",
+	"internal_solid_infill_speed": "200",
+	"top_surface_speed": "200",
+	"gap_infill_speed": "200",
+	"sparse_infill_speed": "500",
+	"compatible_printers": [
+		"Sovol Zero 0.4 nozzle",
+		"Sovol Zero 0.4 Hardened Steel nozzle"
+	]
+}

resources/profiles/Sovol/process/0.30mm Standard @Sovol Zero 0.6 nozzle.json

@@ -0,0 +1,35 @@
+{
+	"type": "process",
+	"setting_id": "lTAs2USEP8D749K7",
+	"name": "0.30mm Standard @Sovol Zero 0.6 nozzle",
+	"from": "system",
+	"inherits": "fdm_process_zero",
+	"instantiation": "true",
+	"layer_height": "0.30",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0.8",
+	"bridge_speed": "50",
+	"outer_wall_acceleration": "10000",
+	"top_surface_acceleration": "5000",
+	"outer_wall_line_width": "0.66",
+	"line_width": "0.66",
+	"sparse_infill_density": "15%",
+	"inner_wall_acceleration": "12000",
+	"initial_layer_print_height": "0.36",
+	"initial_layer_line_width": "0.9",
+	"sparse_infill_line_width": "0.66",
+	"infill_wall_overlap": "20",
+	"inner_wall_line_width": "0.66",
+	"wall_loops": "2",
+	"support_top_z_distance": "0.30",
+	"support_line_width": "0.66",
+	"tree_support_tip_diameter": "0.66",
+	"support_speed": "100",
+	"top_surface_line_width": "0.66",
+	"top_shell_layers": "4",
+	"internal_solid_infill_line_width": "0.66",
+	"compatible_printers": [
+		"Sovol Zero 0.6 nozzle",
+		"Sovol Zero 0.6 Hardened Steel nozzle"
+	]
+}

resources/profiles/Sovol/process/0.40mm Standard @Sovol Zero 0.8 nozzle.json

@@ -0,0 +1,42 @@
+{
+	"type": "process",
+	"name": "0.40mm Standard @Sovol Zero 0.8 nozzle",
+	"inherits": "fdm_process_zero",
+	"from": "system",
+	"setting_id": "8x4CsuqroC9HOdAN",
+	"instantiation": "true",
+	"layer_height": "0.40",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0.8",
+	"bridge_speed": "50",
+	"outer_wall_acceleration": "10000",
+	"top_surface_acceleration": "5000",
+	"outer_wall_line_width": "0.88",
+	"line_width": "0.88",
+	"sparse_infill_density": "15%",
+	"inner_wall_acceleration": "12000",
+	"initial_layer_print_height": "0.48",
+	"initial_layer_line_width": "1.2",
+	"sparse_infill_line_width": "0.88",
+	"infill_wall_overlap": "20",
+	"inner_wall_line_width": "0.88",
+	"wall_loops": "2",
+	"support_top_z_distance": "0.40",
+	"support_line_width": "0.88",
+	"tree_support_tip_diameter": "0.88",
+	"support_speed": "100",
+	"top_surface_line_width": "0.88",
+	"top_shell_layers": "4",
+	"outer_wall_speed": "350",
+	"inner_wall_speed": "400",
+	"small_perimeter_speed": "50%",
+	"internal_solid_infill_speed": "200",
+	"top_surface_speed": "200",
+	"gap_infill_speed": "200",
+	"sparse_infill_speed": "500",
+	"internal_solid_infill_line_width": "0.88",
+	"compatible_printers": [
+		"Sovol Zero 0.8 nozzle",
+		"Sovol Zero 0.8 Hardened Steel nozzle"
+	]
+}

resources/profiles/Sovol/process/0.42mm Fast @Sovol Zero 0.6 nozzle.json

@@ -0,0 +1,39 @@
+{
+	"type": "process",
+	"name": "0.42mm Fast @Sovol Zero 0.6 nozzle",
+	"inherits": "fdm_process_zero",
+	"from": "system",
+	"setting_id": "illqJAnGiA2pY0hw",
+	"instantiation": "true",
+	"layer_height": "0.42",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bridge_speed": "60",
+	"outer_wall_acceleration": "22000",
+	"top_surface_acceleration": "22000",
+	"outer_wall_line_width": "0.72",
+	"line_width": "0.72",
+	"sparse_infill_density": "10%",
+	"inner_wall_acceleration": "28000",
+	"initial_layer_print_height": "0.42",
+	"initial_layer_line_width": "0.9",
+	"sparse_infill_line_width": "0.72",
+	"inner_wall_line_width": "0.72",
+	"internal_solid_infill_line_width": "0.72",
+	"support_top_z_distance": "0.45",
+	"support_line_width": "0.72",
+	"tree_support_tip_diameter": "0.72",
+	"support_speed": "120",
+	"top_surface_line_width": "0.72",
+	"outer_wall_speed": "350",
+	"inner_wall_speed": "400",
+	"small_perimeter_speed": "50%",
+	"internal_solid_infill_speed": "200",
+	"top_surface_speed": "200",
+	"gap_infill_speed": "200",
+	"sparse_infill_speed": "500",
+	"compatible_printers": [
+		"Sovol Zero 0.6 nozzle",
+		"Sovol Zero 0.6 Hardened Steel nozzle"
+	]
+}

resources/profiles/Sovol/process/0.50mm Standard @Sovol Zero 1.0 nozzle.json

@@ -0,0 +1,87 @@
+{
+	"type": "process",
+	"name": "0.50mm Standard @Sovol Zero 1.0 nozzle",
+	"inherits": "fdm_process_zero",
+	"from": "system",
+	"setting_id": "E5K55O4RkMyYCAlt",
+	"instantiation": "true",
+	"layer_height": "0.50",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0.8",
+	"bridge_speed": "45",
+	"internal_bridge_speed": "200",
+	"default_acceleration": "22000",
+	"outer_wall_acceleration": "16000",
+	"top_surface_acceleration": "16000",
+	"outer_wall_line_width": "1.1",
+	"line_width": "1.1",
+	"sparse_infill_density": "15%",
+	"inner_wall_acceleration": "22000",
+	"initial_layer_print_height": "0.60",
+	"initial_layer_line_width": "1.5",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "1.1",
+	"infill_wall_overlap": "20",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.25",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"filename_format": "{input_filename_base}_{nozzle_diameter[0]}n_{filament_type[0]}_{layer_height}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "50",
+	"overhang_3_4_speed": "30",
+	"overhang_4_4_speed": "20",
+	"inner_wall_line_width": "1.1",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "0.8",
+	"skirt_height": "1",
+	"skirt_loops": "1",
+	"minimum_sparse_infill_area": "15",
+	"internal_solid_infill_line_width": "1.1",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "tree(auto)",
+	"support_style": "snug",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.50",
+	"support_bottom_z_distance": "0.235",
+	"support_filament": "0",
+	"support_line_width": "1.1",
+	"tree_support_tip_diameter": "1.1",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "5",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.2",
+	"support_bottom_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_interface_pattern": "grid",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "3.5",
+	"support_speed": "60",
+	"support_threshold_angle": "50",
+	"support_object_xy_distance": "0.35",
+	"tree_support_branch_angle": "40",
+	"top_surface_line_width": "1.1",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "1",
+	"outer_wall_speed": "30",
+	"inner_wall_speed": "45",
+	"small_perimeter_speed": "45",
+	"internal_solid_infill_speed": "45",
+	"top_surface_speed": "35",
+	"gap_infill_speed": "35",
+	"sparse_infill_speed": "70",
+	"travel_acceleration": "38000",
+	"compatible_printers": [
+		"Sovol Zero 1.0 nozzle",
+		"Sovol Zero 1.0 Hardened Steel nozzle"
+	]
+}

resources/profiles/Sovol/process/0.56mm Fast @Sovol Zero 0.8 nozzle.json

@@ -0,0 +1,40 @@
+{
+	"type": "process",
+	"name": "0.56mm Fast @Sovol Zero 0.8 nozzle",
+	"inherits": "fdm_process_zero",
+	"from": "system",
+	"setting_id": "g9PPRM4FLMwjMUfy",
+	"instantiation": "true",
+	"layer_height": "0.56",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bridge_speed": "60",
+	"default_acceleration": "28000",
+	"outer_wall_acceleration": "22000",
+	"top_surface_acceleration": "22000",
+	"outer_wall_line_width": "0.96",
+	"line_width": "0.96",
+	"sparse_infill_density": "10%",
+	"inner_wall_acceleration": "28000",
+	"initial_layer_print_height": "0.56",
+	"initial_layer_line_width": "1.2",
+	"sparse_infill_line_width": "0.96",
+	"inner_wall_line_width": "0.96",
+	"internal_solid_infill_line_width": "0.96",
+	"support_top_z_distance": "0.60",
+	"support_line_width": "0.96",
+	"tree_support_tip_diameter": "0.96",
+	"top_surface_line_width": "0.96",
+	"top_shell_layers": "4",
+	"outer_wall_speed": "35",
+	"inner_wall_speed": "55",
+	"small_perimeter_speed": "60",
+	"internal_solid_infill_speed": "55",
+	"top_surface_speed": "40",
+	"gap_infill_speed": "40",
+	"sparse_infill_speed": "80",
+	"compatible_printers": [
+		"Sovol Zero 0.8 nozzle",
+		"Sovol Zero 0.8 Hardened Steel nozzle"
+	]
+}

resources/profiles/Sovol/process/0.70mm Fast @Sovol Zero 1.0 nozzle.json

@@ -0,0 +1,33 @@
+{
+	"type": "process",
+	"name": "0.70mm Fast @Sovol Zero 1.0 nozzle",
+	"inherits": "fdm_process_zero",
+	"from": "system",
+	"setting_id": "fW5KJBVndgQE868q",
+	"instantiation": "true",
+	"layer_height": "0.70",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bridge_speed": "60",
+	"outer_wall_acceleration": "22000",
+	"top_surface_acceleration": "22000",
+	"outer_wall_line_width": "1.2",
+	"line_width": "1.2",
+	"sparse_infill_density": "10%",
+	"inner_wall_acceleration": "28000",
+	"initial_layer_print_height": "0.70",
+	"initial_layer_line_width": "1.5",
+	"sparse_infill_line_width": "1.2",
+	"inner_wall_line_width": "1.2",
+	"internal_solid_infill_line_width": "1.2",
+	"support_top_z_distance": "0.75",
+	"support_line_width": "1.2",
+	"tree_support_tip_diameter": "1.2",
+	"support_speed": "120",
+	"top_surface_line_width": "1.2",
+	"top_shell_layers": "3",
+	"compatible_printers": [
+		"Sovol Zero 1.0 nozzle",
+		"Sovol Zero 1.0 Hardened Steel nozzle"
+	]
+}

resources/profiles/Sovol/process/fdm_process_zero.json

@@ -0,0 +1,73 @@
+{
+	"type": "process",
+	"name": "fdm_process_zero",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"instantiation": "false",
+	"reduce_crossing_wall": "1",
+	"max_travel_detour_distance": "10",
+	"bottom_surface_pattern": "monotonic",
+	"bridge_flow": "1.2",
+	"internal_bridge_flow": "1.2",
+	"brim_type": "auto_brim",
+	"brim_width": "5",
+	"brim_object_gap": "0",
+	"print_sequence": "by layer",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"enable_arc_fitting": "0",
+	"exclude_object": "1",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"infill_direction": "45",
+	"sparse_infill_pattern": "grid",
+	"internal_solid_infill_acceleration": "50%",
+	"initial_layer_acceleration": "1000",
+	"travel_acceleration": "40000",
+	"outer_wall_jerk": "5",
+	"inner_wall_jerk": "5",
+	"infill_jerk": "5",
+	"top_surface_jerk": "5",
+	"initial_layer_jerk": "5",
+	"travel_jerk": "5",
+	"tree_support_wall_count": "0",
+	"reduce_infill_retraction": "1",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonic",
+	"initial_layer_speed": "55",
+	"initial_layer_infill_speed": "105",
+	"initial_layer_travel_speed": "60%",
+	"outer_wall_speed": "350",
+	"inner_wall_speed": "400",
+	"small_perimeter_speed": "50%",
+	"internal_solid_infill_speed": "200",
+	"top_surface_speed": "200",
+	"gap_infill_speed": "200",
+	"sparse_infill_speed": "500",
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "25%",
+	"travel_speed": "1000",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"bridge_acceleration": "50%",
+	"seam_gap": "10%",
+	"precise_outer_wall": "1",
+	"wall_generator": "classic",
+	"gcode_label_objects": "1",
+	"slow_down_layers": "3",
+	"top_solid_infill_flow_ratio": "0.9",
+	"only_one_wall_top": "1",
+	"top_bottom_infill_wall_overlap": "25%",
+	"filter_out_gap_fill": "0",
+	"detect_narrow_internal_solid_infill": "1",
+	"thick_bridges": "1",
+	"bridge_angle": "0",
+	"initial_layer_line_width": "150%",
+	"default_acceleration": "40000",
+	"compatible_printers": [],
+	"internal_bridge_speed": "150",
+	"filename_format": "{input_filename_base}_{nozzle_diameter[0]}n_{filament_type[0]}_{layer_height}_{print_time}.gcode"
+}

resources/profiles/Wanhao.json

@@ -1,12 +1,60 @@
 {
 	"name": "Wanhao",
-	"version": "02.04.00.02",
+	"version": "02.04.00.03",
 	"force_update": "0",
 	"description": "Wanhao configurations",
 	"machine_model_list": [
 		{
 			"name": "Wanhao D12-300",
 			"sub_path": "machine/Wanhao D12-300.json"
+		},
+		{
+			"name": "Wanhao D9-300 MK1",
+			"sub_path": "machine/Wanhao D9-300 MK1.json"
+		},
+		{
+			"name": "Wanhao D9-300 MK1 BLTouch kit",
+			"sub_path": "machine/Wanhao D9-300 MK1 BLTouch kit.json"
+		},
+		{
+			"name": "Wanhao D9-300 MK2",
+			"sub_path": "machine/Wanhao D9-300 MK2.json"
+		},
+		{
+			"name": "Wanhao D9-300 MK3",
+			"sub_path": "machine/Wanhao D9-300 MK3.json"
+		},
+		{
+			"name": "Wanhao D9-400 MK1",
+			"sub_path": "machine/Wanhao D9-400 MK1.json"
+		},
+		{
+			"name": "Wanhao D9-400 MK1 BLTouch kit",
+			"sub_path": "machine/Wanhao D9-400 MK1 BLTouch kit.json"
+		},
+		{
+			"name": "Wanhao D9-400 MK2",
+			"sub_path": "machine/Wanhao D9-400 MK2.json"
+		},
+		{
+			"name": "Wanhao D9-400 MK3",
+			"sub_path": "machine/Wanhao D9-400 MK3.json"
+		},
+		{
+			"name": "Wanhao D9-500 MK1",
+			"sub_path": "machine/Wanhao D9-500 MK1.json"
+		},
+		{
+			"name": "Wanhao D9-500 MK1 BLTouch kit",
+			"sub_path": "machine/Wanhao D9-500 MK1 BLTouch kit.json"
+		},
+		{
+			"name": "Wanhao D9-500 MK2",
+			"sub_path": "machine/Wanhao D9-500 MK2.json"
+		},
+		{
+			"name": "Wanhao D9-500 MK3",
+			"sub_path": "machine/Wanhao D9-500 MK3.json"
 		}
 	],
 	"process_list": [
@@ -33,6 +81,38 @@
 		{
 			"name": "0.24mm Draft @Wanhao D12-300",
 			"sub_path": "process/0.24mm Draft @Wanhao D12-300.json"
+		},
+		{
+			"name": "fdm_process_wanhao_d9_common",
+			"sub_path": "process/fdm_process_wanhao_d9_common.json"
+		},
+		{
+			"name": "0.12mm Fine @Wanhao D9",
+			"sub_path": "process/0.12mm Fine @Wanhao D9.json"
+		},
+		{
+			"name": "0.20mm Standard @Wanhao D9",
+			"sub_path": "process/0.20mm Standard @Wanhao D9.json"
+		},
+		{
+			"name": "0.28mm Draft @Wanhao D9",
+			"sub_path": "process/0.28mm Draft @Wanhao D9.json"
+		},
+		{
+			"name": "fdm_process_wanhao_d9_mk1_common",
+			"sub_path": "process/fdm_process_wanhao_d9_mk1_common.json"
+		},
+		{
+			"name": "0.12mm Fine @Wanhao D9 MK1",
+			"sub_path": "process/0.12mm Fine @Wanhao D9 MK1.json"
+		},
+		{
+			"name": "0.20mm Standard @Wanhao D9 MK1",
+			"sub_path": "process/0.20mm Standard @Wanhao D9 MK1.json"
+		},
+		{
+			"name": "0.28mm Draft @Wanhao D9 MK1",
+			"sub_path": "process/0.28mm Draft @Wanhao D9 MK1.json"
 		}
 	],
 	"filament_list": [],
@@ -48,6 +128,62 @@
 		{
 			"name": "Wanhao D12-300 0.4 nozzle",
 			"sub_path": "machine/Wanhao D12-300 0.4 nozzle.json"
+		},
+		{
+			"name": "fdm_wanhao_d9_common",
+			"sub_path": "machine/fdm_wanhao_d9_common.json"
+		},
+		{
+			"name": "Wanhao D9-300 MK1 BLTouch kit 0.4 nozzle",
+			"sub_path": "machine/Wanhao D9-300 MK1 BLTouch kit 0.4 nozzle.json"
+		},
+		{
+			"name": "Wanhao D9-300 MK2 0.4 nozzle",
+			"sub_path": "machine/Wanhao D9-300 MK2 0.4 nozzle.json"
+		},
+		{
+			"name": "Wanhao D9-300 MK3 0.4 nozzle",
+			"sub_path": "machine/Wanhao D9-300 MK3 0.4 nozzle.json"
+		},
+		{
+			"name": "Wanhao D9-400 MK1 BLTouch kit 0.4 nozzle",
+			"sub_path": "machine/Wanhao D9-400 MK1 BLTouch kit 0.4 nozzle.json"
+		},
+		{
+			"name": "Wanhao D9-400 MK2 0.4 nozzle",
+			"sub_path": "machine/Wanhao D9-400 MK2 0.4 nozzle.json"
+		},
+		{
+			"name": "Wanhao D9-400 MK3 0.4 nozzle",
+			"sub_path": "machine/Wanhao D9-400 MK3 0.4 nozzle.json"
+		},
+		{
+			"name": "Wanhao D9-500 MK1 BLTouch kit 0.4 nozzle",
+			"sub_path": "machine/Wanhao D9-500 MK1 BLTouch kit 0.4 nozzle.json"
+		},
+		{
+			"name": "Wanhao D9-500 MK2 0.4 nozzle",
+			"sub_path": "machine/Wanhao D9-500 MK2 0.4 nozzle.json"
+		},
+		{
+			"name": "Wanhao D9-500 MK3 0.4 nozzle",
+			"sub_path": "machine/Wanhao D9-500 MK3 0.4 nozzle.json"
+		},
+		{
+			"name": "fdm_wanhao_d9_mk1_common",
+			"sub_path": "machine/fdm_wanhao_d9_mk1_common.json"
+		},
+		{
+			"name": "Wanhao D9-300 MK1 0.4 nozzle",
+			"sub_path": "machine/Wanhao D9-300 MK1 0.4 nozzle.json"
+		},
+		{
+			"name": "Wanhao D9-400 MK1 0.4 nozzle",
+			"sub_path": "machine/Wanhao D9-400 MK1 0.4 nozzle.json"
+		},
+		{
+			"name": "Wanhao D9-500 MK1 0.4 nozzle",
+			"sub_path": "machine/Wanhao D9-500 MK1 0.4 nozzle.json"
 		}
 	]
 }

resources/profiles/Wanhao/machine/Wanhao D9-300 MK1 0.4 nozzle.json

@@ -0,0 +1,20 @@
+{
+	"type": "machine",
+	"name": "Wanhao D9-300 MK1 0.4 nozzle",
+	"inherits": "fdm_wanhao_d9_mk1_common",
+	"from": "system",
+	"setting_id": "MXNRpMDaVXj2xUx0",
+	"instantiation": "true",
+	"printer_model": "Wanhao D9-300 MK1",
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"printable_area": [
+		"0x0",
+		"300x0",
+		"300x300",
+		"0x300"
+	],
+	"printable_height": "400",
+	"default_print_profile": "0.20mm Standard @Wanhao D9 MK1"
+}

resources/profiles/Wanhao/machine/Wanhao D9-300 MK1 BLTouch kit 0.4 nozzle.json

@@ -0,0 +1,20 @@
+{
+	"type": "machine",
+	"name": "Wanhao D9-300 MK1 BLTouch kit 0.4 nozzle",
+	"inherits": "fdm_wanhao_d9_common",
+	"from": "system",
+	"setting_id": "rq6cPs92KgrUyZrn",
+	"instantiation": "true",
+	"printer_model": "Wanhao D9-300 MK1 BLTouch kit",
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"printable_area": [
+		"0x0",
+		"300x0",
+		"300x300",
+		"0x300"
+	],
+	"printable_height": "400",
+	"default_print_profile": "0.20mm Standard @Wanhao D9"
+}

resources/profiles/Wanhao/machine/Wanhao D9-300 MK1 BLTouch kit.json

@@ -0,0 +1,9 @@
+{
+	"type": "machine_model",
+	"name": "Wanhao D9-300 MK1 BLTouch kit",
+	"model_id": "Wanhao-D9-300-MK1u2",
+	"nozzle_diameter": "0.4",
+	"machine_tech": "FFF",
+	"family": "Wanhao",
+	"default_materials": "Generic PLA @System;Generic PETG @System;Generic ABS @System"
+}

resources/profiles/Wanhao/machine/Wanhao D9-300 MK1.json

@@ -0,0 +1,9 @@
+{
+	"type": "machine_model",
+	"name": "Wanhao D9-300 MK1",
+	"model_id": "Wanhao-D9-300-MK1",
+	"nozzle_diameter": "0.4",
+	"machine_tech": "FFF",
+	"family": "Wanhao",
+	"default_materials": "Generic PLA @System;Generic PETG @System;Generic ABS @System"
+}

resources/profiles/Wanhao/machine/Wanhao D9-300 MK2 0.4 nozzle.json

@@ -0,0 +1,20 @@
+{
+	"type": "machine",
+	"name": "Wanhao D9-300 MK2 0.4 nozzle",
+	"inherits": "fdm_wanhao_d9_common",
+	"from": "system",
+	"setting_id": "w3Cin9es1Jfx0dmR",
+	"instantiation": "true",
+	"printer_model": "Wanhao D9-300 MK2",
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"printable_area": [
+		"0x0",
+		"300x0",
+		"300x300",
+		"0x300"
+	],
+	"printable_height": "400",
+	"default_print_profile": "0.20mm Standard @Wanhao D9"
+}

resources/profiles/Wanhao/machine/Wanhao D9-300 MK2.json

@@ -0,0 +1,9 @@
+{
+	"type": "machine_model",
+	"name": "Wanhao D9-300 MK2",
+	"model_id": "Wanhao-D9-300-MK2",
+	"nozzle_diameter": "0.4",
+	"machine_tech": "FFF",
+	"family": "Wanhao",
+	"default_materials": "Generic PLA @System;Generic PETG @System;Generic ABS @System"
+}

resources/profiles/Wanhao/machine/Wanhao D9-300 MK3 0.4 nozzle.json

@@ -0,0 +1,20 @@
+{
+	"type": "machine",
+	"name": "Wanhao D9-300 MK3 0.4 nozzle",
+	"inherits": "fdm_wanhao_d9_common",
+	"from": "system",
+	"setting_id": "acFQWZqlt4QSgBPv",
+	"instantiation": "true",
+	"printer_model": "Wanhao D9-300 MK3",
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"printable_area": [
+		"0x0",
+		"300x0",
+		"300x300",
+		"0x300"
+	],
+	"printable_height": "400",
+	"default_print_profile": "0.20mm Standard @Wanhao D9"
+}

resources/profiles/Wanhao/machine/Wanhao D9-300 MK3.json

@@ -0,0 +1,9 @@
+{
+	"type": "machine_model",
+	"name": "Wanhao D9-300 MK3",
+	"model_id": "Wanhao-D9-300-MK3",
+	"nozzle_diameter": "0.4",
+	"machine_tech": "FFF",
+	"family": "Wanhao",
+	"default_materials": "Generic PLA @System;Generic PETG @System;Generic ABS @System"
+}

resources/profiles/Wanhao/machine/Wanhao D9-400 MK1 0.4 nozzle.json

@@ -0,0 +1,20 @@
+{
+	"type": "machine",
+	"name": "Wanhao D9-400 MK1 0.4 nozzle",
+	"inherits": "fdm_wanhao_d9_mk1_common",
+	"from": "system",
+	"setting_id": "DGSNE3AbmlBBG5PY",
+	"instantiation": "true",
+	"printer_model": "Wanhao D9-400 MK1",
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"printable_area": [
+		"0x0",
+		"400x0",
+		"400x400",
+		"0x400"
+	],
+	"printable_height": "400",
+	"default_print_profile": "0.20mm Standard @Wanhao D9 MK1"
+}

resources/profiles/Wanhao/machine/Wanhao D9-400 MK1 BLTouch kit 0.4 nozzle.json

@@ -0,0 +1,20 @@
+{
+	"type": "machine",
+	"name": "Wanhao D9-400 MK1 BLTouch kit 0.4 nozzle",
+	"inherits": "fdm_wanhao_d9_common",
+	"from": "system",
+	"setting_id": "WcKY7v24ewtzPfnU",
+	"instantiation": "true",
+	"printer_model": "Wanhao D9-400 MK1 BLTouch kit",
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"printable_area": [
+		"0x0",
+		"400x0",
+		"400x400",
+		"0x400"
+	],
+	"printable_height": "400",
+	"default_print_profile": "0.20mm Standard @Wanhao D9"
+}

resources/profiles/Wanhao/machine/Wanhao D9-400 MK1 BLTouch kit.json

@@ -0,0 +1,9 @@
+{
+	"type": "machine_model",
+	"name": "Wanhao D9-400 MK1 BLTouch kit",
+	"model_id": "Wanhao-D9-400-MK1u2",
+	"nozzle_diameter": "0.4",
+	"machine_tech": "FFF",
+	"family": "Wanhao",
+	"default_materials": "Generic PLA @System;Generic PETG @System;Generic ABS @System"
+}

resources/profiles/Wanhao/machine/Wanhao D9-400 MK1.json

@@ -0,0 +1,9 @@
+{
+	"type": "machine_model",
+	"name": "Wanhao D9-400 MK1",
+	"model_id": "Wanhao-D9-400-MK1",
+	"nozzle_diameter": "0.4",
+	"machine_tech": "FFF",
+	"family": "Wanhao",
+	"default_materials": "Generic PLA @System;Generic PETG @System;Generic ABS @System"
+}

resources/profiles/Wanhao/machine/Wanhao D9-400 MK2 0.4 nozzle.json

@@ -0,0 +1,20 @@
+{
+	"type": "machine",
+	"name": "Wanhao D9-400 MK2 0.4 nozzle",
+	"inherits": "fdm_wanhao_d9_common",
+	"from": "system",
+	"setting_id": "jn1FEJFeN7S2gEbD",
+	"instantiation": "true",
+	"printer_model": "Wanhao D9-400 MK2",
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"printable_area": [
+		"0x0",
+		"400x0",
+		"400x400",
+		"0x400"
+	],
+	"printable_height": "400",
+	"default_print_profile": "0.20mm Standard @Wanhao D9"
+}

resources/profiles/Wanhao/machine/Wanhao D9-400 MK2.json

@@ -0,0 +1,9 @@
+{
+	"type": "machine_model",
+	"name": "Wanhao D9-400 MK2",
+	"model_id": "Wanhao-D9-400-MK2",
+	"nozzle_diameter": "0.4",
+	"machine_tech": "FFF",
+	"family": "Wanhao",
+	"default_materials": "Generic PLA @System;Generic PETG @System;Generic ABS @System"
+}

resources/profiles/Wanhao/machine/Wanhao D9-400 MK3 0.4 nozzle.json

@@ -0,0 +1,20 @@
+{
+	"type": "machine",
+	"name": "Wanhao D9-400 MK3 0.4 nozzle",
+	"inherits": "fdm_wanhao_d9_common",
+	"from": "system",
+	"setting_id": "2kFyH1E3tqMWtDmG",
+	"instantiation": "true",
+	"printer_model": "Wanhao D9-400 MK3",
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"printable_area": [
+		"0x0",
+		"400x0",
+		"400x400",
+		"0x400"
+	],
+	"printable_height": "400",
+	"default_print_profile": "0.20mm Standard @Wanhao D9"
+}

resources/profiles/Wanhao/machine/Wanhao D9-400 MK3.json

@@ -0,0 +1,9 @@
+{
+	"type": "machine_model",
+	"name": "Wanhao D9-400 MK3",
+	"model_id": "Wanhao-D9-400-MK3",
+	"nozzle_diameter": "0.4",
+	"machine_tech": "FFF",
+	"family": "Wanhao",
+	"default_materials": "Generic PLA @System;Generic PETG @System;Generic ABS @System"
+}

resources/profiles/Wanhao/machine/Wanhao D9-500 MK1 0.4 nozzle.json

@@ -0,0 +1,20 @@
+{
+	"type": "machine",
+	"name": "Wanhao D9-500 MK1 0.4 nozzle",
+	"inherits": "fdm_wanhao_d9_mk1_common",
+	"from": "system",
+	"setting_id": "nj0TfnDKHb4wFX1R",
+	"instantiation": "true",
+	"printer_model": "Wanhao D9-500 MK1",
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"printable_area": [
+		"0x0",
+		"500x0",
+		"500x500",
+		"0x500"
+	],
+	"printable_height": "500",
+	"default_print_profile": "0.20mm Standard @Wanhao D9 MK1"
+}

resources/profiles/Wanhao/machine/Wanhao D9-500 MK1 BLTouch kit 0.4 nozzle.json

@@ -0,0 +1,20 @@
+{
+	"type": "machine",
+	"name": "Wanhao D9-500 MK1 BLTouch kit 0.4 nozzle",
+	"inherits": "fdm_wanhao_d9_common",
+	"from": "system",
+	"setting_id": "Hmrnlh6pJzdO2dIJ",
+	"instantiation": "true",
+	"printer_model": "Wanhao D9-500 MK1 BLTouch kit",
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"printable_area": [
+		"0x0",
+		"500x0",
+		"500x500",
+		"0x500"
+	],
+	"printable_height": "500",
+	"default_print_profile": "0.20mm Standard @Wanhao D9"
+}

resources/profiles/Wanhao/machine/Wanhao D9-500 MK1 BLTouch kit.json

@@ -0,0 +1,9 @@
+{
+	"type": "machine_model",
+	"name": "Wanhao D9-500 MK1 BLTouch kit",
+	"model_id": "Wanhao-D9-500-MK1u2",
+	"nozzle_diameter": "0.4",
+	"machine_tech": "FFF",
+	"family": "Wanhao",
+	"default_materials": "Generic PLA @System;Generic PETG @System;Generic ABS @System"
+}

resources/profiles/Wanhao/machine/Wanhao D9-500 MK1.json

@@ -0,0 +1,9 @@
+{
+	"type": "machine_model",
+	"name": "Wanhao D9-500 MK1",
+	"model_id": "Wanhao-D9-500-MK1",
+	"nozzle_diameter": "0.4",
+	"machine_tech": "FFF",
+	"family": "Wanhao",
+	"default_materials": "Generic PLA @System;Generic PETG @System;Generic ABS @System"
+}

resources/profiles/Wanhao/machine/Wanhao D9-500 MK2 0.4 nozzle.json

@@ -0,0 +1,20 @@
+{
+	"type": "machine",
+	"name": "Wanhao D9-500 MK2 0.4 nozzle",
+	"inherits": "fdm_wanhao_d9_common",
+	"from": "system",
+	"setting_id": "g2GSmhWJLFDwqzFI",
+	"instantiation": "true",
+	"printer_model": "Wanhao D9-500 MK2",
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"printable_area": [
+		"0x0",
+		"500x0",
+		"500x500",
+		"0x500"
+	],
+	"printable_height": "500",
+	"default_print_profile": "0.20mm Standard @Wanhao D9"
+}

resources/profiles/Wanhao/machine/Wanhao D9-500 MK2.json

@@ -0,0 +1,9 @@
+{
+	"type": "machine_model",
+	"name": "Wanhao D9-500 MK2",
+	"model_id": "Wanhao-D9-500-MK2",
+	"nozzle_diameter": "0.4",
+	"machine_tech": "FFF",
+	"family": "Wanhao",
+	"default_materials": "Generic PLA @System;Generic PETG @System;Generic ABS @System"
+}

resources/profiles/Wanhao/machine/Wanhao D9-500 MK3 0.4 nozzle.json

@@ -0,0 +1,20 @@
+{
+	"type": "machine",
+	"name": "Wanhao D9-500 MK3 0.4 nozzle",
+	"inherits": "fdm_wanhao_d9_common",
+	"from": "system",
+	"setting_id": "F7l90Rgr8Ni0sQva",
+	"instantiation": "true",
+	"printer_model": "Wanhao D9-500 MK3",
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"printable_area": [
+		"0x0",
+		"500x0",
+		"500x500",
+		"0x500"
+	],
+	"printable_height": "500",
+	"default_print_profile": "0.20mm Standard @Wanhao D9"
+}

resources/profiles/Wanhao/machine/Wanhao D9-500 MK3.json

@@ -0,0 +1,9 @@
+{
+	"type": "machine_model",
+	"name": "Wanhao D9-500 MK3",
+	"model_id": "Wanhao-D9-500-MK3",
+	"nozzle_diameter": "0.4",
+	"machine_tech": "FFF",
+	"family": "Wanhao",
+	"default_materials": "Generic PLA @System;Generic PETG @System;Generic ABS @System"
+}

resources/profiles/Wanhao/machine/fdm_wanhao_d9_common.json

@@ -0,0 +1,108 @@
+{
+	"type": "machine",
+	"name": "fdm_wanhao_d9_common",
+	"inherits": "fdm_wanhao_common",
+	"from": "system",
+	"instantiation": "false",
+	"gcode_flavor": "marlin2",
+	"use_relative_e_distances": "1",
+	"emit_machine_limits_to_gcode": "0",
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"printer_variant": "0.4",
+	"max_layer_height": [
+		"0.32"
+	],
+	"min_layer_height": [
+		"0.08"
+	],
+	"machine_max_speed_x": [
+		"300",
+		"300"
+	],
+	"machine_max_speed_y": [
+		"300",
+		"300"
+	],
+	"machine_max_speed_z": [
+		"5",
+		"5"
+	],
+	"machine_max_speed_e": [
+		"25",
+		"25"
+	],
+	"machine_max_acceleration_x": [
+		"3000",
+		"3000"
+	],
+	"machine_max_acceleration_y": [
+		"3000",
+		"3000"
+	],
+	"machine_max_acceleration_z": [
+		"100",
+		"100"
+	],
+	"machine_max_acceleration_e": [
+		"3000",
+		"3000"
+	],
+	"machine_max_acceleration_extruding": [
+		"1000",
+		"1000"
+	],
+	"machine_max_acceleration_travel": [
+		"1000",
+		"1000"
+	],
+	"machine_max_acceleration_retracting": [
+		"800",
+		"800"
+	],
+	"machine_max_jerk_x": [
+		"10",
+		"10"
+	],
+	"machine_max_jerk_y": [
+		"10",
+		"10"
+	],
+	"machine_max_jerk_z": [
+		"0.4",
+		"0.4"
+	],
+	"machine_max_jerk_e": [
+		"1",
+		"1"
+	],
+	"retraction_length": [
+		"2.0"
+	],
+	"retraction_speed": [
+		"25"
+	],
+	"deretraction_speed": [
+		"25"
+	],
+	"retraction_minimum_travel": [
+		"1"
+	],
+	"z_hop": [
+		"0"
+	],
+	"wipe": [
+		"0"
+	],
+	"retract_when_changing_layer": [
+		"1"
+	],
+	"machine_start_gcode": "; Wanhao Duplicator 9 start G-code, for the Marlin 2.1 firmwares at github.com/Le-Syl21/WANHAO-Duplicator-9\nG21 ; millimetres\nG90 ; absolute coordinates\nM83 ; relative extrusion\nM140 S[bed_temperature_initial_layer_single] ; heat the bed\nM104 S150 ; warm the nozzle without letting it ooze\nG91 ; a print stopped by hand can leave the nozzle down on the bed\nG1 Z10 F300 ; so raise it before homing: a BLTouch needs 10 mm to deploy\nG90\nM280 P0 S160 ; BLTouch: clear an alarm and stow the pin\nG28 ; home all axes (this turns bed levelling off)\nM420 S1 ; turn the bed mesh saved from the screen back on\nG1 Z10 F300\nM104 S[nozzle_temperature_initial_layer] ; start the nozzle now, the bed is still heating\nM190 S[bed_temperature_initial_layer_single] ; wait for the bed\nM109 S[nozzle_temperature_initial_layer] ; and confirm the nozzle\nG92 E0\nG1 X15 Y20 Z0.3 F3000 ; start of the priming line\nG1 Y140 E9.0 F1200 ; draw a line of filament\nG1 X15.5 F3000\nG1 Y20 E9.0 F1200 ; and back, next to it\nG92 E0\nG1 X22 F6000 ; wipe sideways to snap the string\nG1 Z2 F300 ; lift, so the line does not stick to the nozzle",
+	"machine_end_gcode": "; Wanhao Duplicator 9 end G-code\nM104 S0 ; nozzle heater off\nM140 S0 ; bed heater off\nM107 ; fan off\nG91 ; relative moves\nG1 E-2 F1500 ; release the pressure in the nozzle\nG1 Z10 F300 ; lift the nozzle\nG90 ; absolute moves\nG1 X5 Y{print_bed_max[1] - 10} F3000 ; bring the bed to the front\nM84 X Y E ; motors off, Z keeps its position",
+	"layer_change_gcode": "G92 E0",
+	"machine_pause_gcode": "M600",
+	"default_filament_profile": [
+		"Generic PLA @System"
+	]
+}

resources/profiles/Wanhao/machine/fdm_wanhao_d9_mk1_common.json

@@ -0,0 +1,28 @@
+{
+	"type": "machine",
+	"name": "fdm_wanhao_d9_mk1_common",
+	"inherits": "fdm_wanhao_d9_common",
+	"from": "system",
+	"instantiation": "false",
+	"machine_start_gcode": "; Wanhao Duplicator 9 start G-code, for the Marlin 2.1 firmwares at github.com/Le-Syl21/WANHAO-Duplicator-9\nG21 ; millimetres\nG90 ; absolute coordinates\nM83 ; relative extrusion\nM140 S[bed_temperature_initial_layer_single] ; heat the bed\nM104 S150 ; warm the nozzle without letting it ooze\nG91 ; a print stopped by hand can leave the nozzle down on the bed\nG1 Z10 F300 ; clear the bed before homing\nG90\nG28 ; home all axes (this turns bed levelling off)\nM420 S1 ; turn the bed mesh saved from the screen back on\nG1 Z10 F300\nM104 S[nozzle_temperature_initial_layer] ; start the nozzle now, the bed is still heating\nM190 S[bed_temperature_initial_layer_single] ; wait for the bed\nM109 S[nozzle_temperature_initial_layer] ; and confirm the nozzle\nG92 E0\nG1 X15 Y20 Z0.3 F3000 ; start of the priming line\nG1 Y140 E9.0 F1200 ; draw a line of filament\nG1 X15.5 F3000\nG1 Y20 E9.0 F1200 ; and back, next to it\nG92 E0\nG1 X22 F6000 ; wipe sideways to snap the string\nG1 Z2 F300 ; lift, so the line does not stick to the nozzle",
+	"machine_max_acceleration_x": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_y": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_e": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_extruding": [
+		"500",
+		"500"
+	],
+	"machine_max_acceleration_travel": [
+		"500",
+		"500"
+	]
+}

resources/profiles/Wanhao/process/0.12mm Fine @Wanhao D9 MK1.json

@@ -0,0 +1,17 @@
+{
+	"type": "process",
+	"name": "0.12mm Fine @Wanhao D9 MK1",
+	"inherits": "fdm_process_wanhao_d9_mk1_common",
+	"from": "system",
+	"setting_id": "EClNN5UDWbLACTuz",
+	"instantiation": "true",
+	"layer_height": "0.12",
+	"initial_layer_print_height": "0.14",
+	"top_shell_layers": "4",
+	"bottom_shell_layers": "4",
+	"compatible_printers": [
+		"Wanhao D9-300 MK1 0.4 nozzle",
+		"Wanhao D9-400 MK1 0.4 nozzle",
+		"Wanhao D9-500 MK1 0.4 nozzle"
+	]
+}

resources/profiles/Wanhao/process/0.12mm Fine @Wanhao D9.json

@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.12mm Fine @Wanhao D9",
+	"inherits": "fdm_process_wanhao_d9_common",
+	"from": "system",
+	"setting_id": "0hvsKsPO55TlduZR",
+	"instantiation": "true",
+	"layer_height": "0.12",
+	"initial_layer_print_height": "0.14",
+	"top_shell_layers": "4",
+	"bottom_shell_layers": "4",
+	"compatible_printers": [
+		"Wanhao D9-300 MK1 BLTouch kit 0.4 nozzle",
+		"Wanhao D9-400 MK1 BLTouch kit 0.4 nozzle",
+		"Wanhao D9-500 MK1 BLTouch kit 0.4 nozzle",
+		"Wanhao D9-300 MK2 0.4 nozzle",
+		"Wanhao D9-400 MK2 0.4 nozzle",
+		"Wanhao D9-500 MK2 0.4 nozzle",
+		"Wanhao D9-300 MK3 0.4 nozzle",
+		"Wanhao D9-400 MK3 0.4 nozzle",
+		"Wanhao D9-500 MK3 0.4 nozzle"
+	]
+}

resources/profiles/Wanhao/process/0.20mm Standard @Wanhao D9 MK1.json

@@ -0,0 +1,17 @@
+{
+	"type": "process",
+	"name": "0.20mm Standard @Wanhao D9 MK1",
+	"inherits": "fdm_process_wanhao_d9_mk1_common",
+	"from": "system",
+	"setting_id": "CXNOj3tPeTUXx81B",
+	"instantiation": "true",
+	"layer_height": "0.20",
+	"initial_layer_print_height": "0.24",
+	"top_shell_layers": "3",
+	"bottom_shell_layers": "3",
+	"compatible_printers": [
+		"Wanhao D9-300 MK1 0.4 nozzle",
+		"Wanhao D9-400 MK1 0.4 nozzle",
+		"Wanhao D9-500 MK1 0.4 nozzle"
+	]
+}

resources/profiles/Wanhao/process/0.20mm Standard @Wanhao D9.json

@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.20mm Standard @Wanhao D9",
+	"inherits": "fdm_process_wanhao_d9_common",
+	"from": "system",
+	"setting_id": "UVXxknNxJswqaURQ",
+	"instantiation": "true",
+	"layer_height": "0.20",
+	"initial_layer_print_height": "0.24",
+	"top_shell_layers": "3",
+	"bottom_shell_layers": "3",
+	"compatible_printers": [
+		"Wanhao D9-300 MK1 BLTouch kit 0.4 nozzle",
+		"Wanhao D9-400 MK1 BLTouch kit 0.4 nozzle",
+		"Wanhao D9-500 MK1 BLTouch kit 0.4 nozzle",
+		"Wanhao D9-300 MK2 0.4 nozzle",
+		"Wanhao D9-400 MK2 0.4 nozzle",
+		"Wanhao D9-500 MK2 0.4 nozzle",
+		"Wanhao D9-300 MK3 0.4 nozzle",
+		"Wanhao D9-400 MK3 0.4 nozzle",
+		"Wanhao D9-500 MK3 0.4 nozzle"
+	]
+}

resources/profiles/Wanhao/process/0.28mm Draft @Wanhao D9 MK1.json

@@ -0,0 +1,17 @@
+{
+	"type": "process",
+	"name": "0.28mm Draft @Wanhao D9 MK1",
+	"inherits": "fdm_process_wanhao_d9_mk1_common",
+	"from": "system",
+	"setting_id": "omfIWwVnQVVxPrtb",
+	"instantiation": "true",
+	"layer_height": "0.28",
+	"initial_layer_print_height": "0.34",
+	"top_shell_layers": "3",
+	"bottom_shell_layers": "3",
+	"compatible_printers": [
+		"Wanhao D9-300 MK1 0.4 nozzle",
+		"Wanhao D9-400 MK1 0.4 nozzle",
+		"Wanhao D9-500 MK1 0.4 nozzle"
+	]
+}

resources/profiles/Wanhao/process/0.28mm Draft @Wanhao D9.json

@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.28mm Draft @Wanhao D9",
+	"inherits": "fdm_process_wanhao_d9_common",
+	"from": "system",
+	"setting_id": "FEJqq1ylXWqaBPR6",
+	"instantiation": "true",
+	"layer_height": "0.28",
+	"initial_layer_print_height": "0.34",
+	"top_shell_layers": "3",
+	"bottom_shell_layers": "3",
+	"compatible_printers": [
+		"Wanhao D9-300 MK1 BLTouch kit 0.4 nozzle",
+		"Wanhao D9-400 MK1 BLTouch kit 0.4 nozzle",
+		"Wanhao D9-500 MK1 BLTouch kit 0.4 nozzle",
+		"Wanhao D9-300 MK2 0.4 nozzle",
+		"Wanhao D9-400 MK2 0.4 nozzle",
+		"Wanhao D9-500 MK2 0.4 nozzle",
+		"Wanhao D9-300 MK3 0.4 nozzle",
+		"Wanhao D9-400 MK3 0.4 nozzle",
+		"Wanhao D9-500 MK3 0.4 nozzle"
+	]
+}

resources/profiles/Wanhao/process/fdm_process_wanhao_d9_common.json

@@ -0,0 +1,38 @@
+{
+	"type": "process",
+	"name": "fdm_process_wanhao_d9_common",
+	"inherits": "fdm_process_wanhao_common",
+	"from": "system",
+	"instantiation": "false",
+	"line_width": "0.4",
+	"initial_layer_line_width": "0.6",
+	"wall_loops": "2",
+	"infill_wall_overlap": "15%",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "gyroid",
+	"outer_wall_speed": "25",
+	"inner_wall_speed": "40",
+	"sparse_infill_speed": "50",
+	"internal_solid_infill_speed": "50",
+	"top_surface_speed": "40",
+	"gap_infill_speed": "40",
+	"bridge_speed": "50",
+	"support_speed": "35",
+	"initial_layer_speed": "25",
+	"initial_layer_infill_speed": "25",
+	"travel_speed": "100",
+	"default_acceleration": "1000",
+	"outer_wall_acceleration": "1000",
+	"inner_wall_acceleration": "1000",
+	"top_surface_acceleration": "1000",
+	"sparse_infill_acceleration": "1000",
+	"initial_layer_acceleration": "1000",
+	"bridge_acceleration": "1000",
+	"travel_acceleration": "1000",
+	"default_jerk": "0",
+	"skirt_loops": "2",
+	"skirt_distance": "4",
+	"brim_type": "no_brim",
+	"enable_support": "0",
+	"enable_arc_fitting": "0"
+}

resources/profiles/Wanhao/process/fdm_process_wanhao_d9_mk1_common.json

@@ -0,0 +1,15 @@
+{
+	"type": "process",
+	"name": "fdm_process_wanhao_d9_mk1_common",
+	"inherits": "fdm_process_wanhao_d9_common",
+	"from": "system",
+	"instantiation": "false",
+	"default_acceleration": "500",
+	"outer_wall_acceleration": "500",
+	"inner_wall_acceleration": "500",
+	"top_surface_acceleration": "500",
+	"sparse_infill_acceleration": "500",
+	"initial_layer_acceleration": "500",
+	"bridge_acceleration": "500",
+	"travel_acceleration": "500"
+}

resources/web/dialog/PluginsDialog/index.js

@@ -575,7 +575,7 @@ function CapabilityCanRun(plugin, capability) {
 }
 
 function IsPluginChecked(plugin) {
-  return plugin.is_loaded;
+  return GetStatus(plugin) === "Activated";
 }
 
 function HasMixedCapabilityState(plugin) {
@@ -1347,8 +1347,6 @@ function StatusDescription(plugin) {
       return "This plugin is still loading.";
     case "Error":
       return "This plugin is blocked until its error is fixed.";
-    case "RuntimeError":
-      return "This plugin is loaded but a capability reported an error.";
     case "Inactive":
     default:
       return "This plugin is inactive. Activate it to install or load it.";

resources/web/dialog/PluginsDialog/styles.css

@@ -424,11 +424,6 @@ body.pane-resizing {
   font-weight: 600;
 }
 
-.status-cell.status-runtimeerror {
-  color: var(--plugin-status-warn);
-  font-weight: 600;
-}
-
 .status-cell.status-loading {
   color: var(--plugin-status-warn);
   font-weight: 600;
@@ -685,11 +680,6 @@ body.pane-resizing {
   color: var(--plugin-status-danger);
 }
 
-.detail-status-chip.status-runtimeerror {
-  background: var(--plugin-status-warn-bg);
-  color: var(--plugin-status-warn);
-}
-
 .detail-status-chip.status-loading {
   background: var(--plugin-status-warn-bg);
   color: var(--plugin-status-warn);

resources/web/dialog/SpeedDial/speeddial.js

@@ -30,7 +30,7 @@ var USER_MODE = "simple";
 var MODE_RANK = { simple: 0, advanced: 1, expert: 2, develop: 3 };
 
 // Search ranking weights: every contiguous match must outrank every fuzzy one regardless of field,
-// and title must outrank group, which outranks source.
+// and title must outrank group/category, which outranks source.
 var SCORE_CONTIGUOUS = 100000;
 var SCORE_TITLE = 2000;
 var SCORE_GROUP = 1000;
@@ -118,6 +118,18 @@ function sourceNorm(a) {
         a._sn = NormText(a.source || "", false);
     return a._sn;
 }
+function pluginCategoryNorm(a) {
+    if (a._pcn === undefined)
+        a._pcn = a.kind === "plugin" ? NormText(T("sd_plugins", "Plugins"), false) : "";
+    return a._pcn;
+}
+// Plugin type is searchable metadata, so typing "plugin" can find runnable plugin actions even
+// when neither their capability nor plugin name contains that word. Keep both category forms.
+function pluginTypeNorm(a) {
+    if (a._pn === undefined)
+        a._pn = a.kind === "plugin" ? NormText("plugin plugins", false) : "";
+    return a._pn;
+}
 // Search-only alias for the descriptive name when the title differs (e.g. "Reverse on even" vs
 // "Overhang reversal"). Never rendered, so no highlight ranges.
 function fullNorm(a) {
@@ -152,7 +164,7 @@ function fieldMatchScore(norm, needle, wwRe) {
 
 // Split a query into normalized (folded+lowercased) whitespace-separated tokens. Empty for a blank
 // query. These drive the multi-token path: every token must match some field, but different tokens
-// may match different fields (the title, the group, or the source breadcrumb).
+// may match different fields (the title, group, source breadcrumb, or plugin kind).
 function queryTokens(query) {
     var norm = NormText(String(query || "").trim(), false);
     return norm ? norm.split(/\s+/).filter(Boolean) : [];
@@ -170,14 +182,19 @@ function tokenMatch(a, token, wwRe) {
     var g = fieldMatchScore(groupNorm(a), token, wwRe);
     var s = fieldMatchScore(sourceNorm(a), token, wwRe);
     var f = fieldMatchScore(fullNorm(a), token, wwRe);
-    if (!t && !g && !s && !f) return null;
+    var p = fieldMatchScore(pluginCategoryNorm(a), token, wwRe);
+    var typeMatch = fieldMatchScore(pluginTypeNorm(a), token, wwRe);
+    if (!t && !g && !s && !f && !p && !typeMatch) return null;
     var score = Math.max(
         t ? (t.contiguous ? SCORE_CONTIGUOUS : 0) + SCORE_TITLE + t.score : -Infinity,
         g ? (g.contiguous ? SCORE_CONTIGUOUS : 0) + SCORE_GROUP + g.score : -Infinity,
         s ? (s.contiguous ? SCORE_CONTIGUOUS : 0) + s.score : -Infinity,
-        f ? (f.contiguous ? SCORE_CONTIGUOUS : 0) + f.score : -Infinity
+        f ? (f.contiguous ? SCORE_CONTIGUOUS : 0) + f.score : -Infinity,
+        p ? (p.contiguous ? SCORE_CONTIGUOUS : 0) + SCORE_GROUP + p.score : -Infinity,
+        typeMatch ? (typeMatch.contiguous ? SCORE_CONTIGUOUS : 0) + SCORE_GROUP + typeMatch.score : -Infinity
     );
-    return { score: score, title: t ? t.ranges : null, group: g ? g.ranges : null, source: s ? s.ranges : null };
+    return { score: score, title: t ? t.ranges : null, group: g ? g.ranges : null, source: s ? s.ranges : null,
+             plugin: p ? p.ranges : null };
 }
 
 // Merge per-field token ranges into sorted, coalesced ranges for highlighting. Overlapping or adjacent
@@ -201,8 +218,8 @@ function mergeRanges(ranges) {
 }
 
 // Combine per-field scores into one value, or null when nothing matched.
-// Ranking: contiguous > fuzzy, then title > group > source/full alias, then start/gaps.
-function scoreFields(t, g, s, f) {
+// Ranking: contiguous > fuzzy, then title > group/category > source/full alias, then start/gaps.
+function scoreFields(t, g, s, f, p, typeMatch) {
     var best = null;
     function consider(m, weight) {
         if (!m) return;
@@ -213,6 +230,8 @@ function scoreFields(t, g, s, f) {
     consider(g, SCORE_GROUP);
     consider(s, 0);
     consider(f, 0);
+    consider(p, SCORE_GROUP);
+    consider(typeMatch, SCORE_GROUP);
     return best;
 }
 
@@ -226,7 +245,8 @@ function scoreFields(t, g, s, f) {
 //   - tokens: every whitespace-separated word must match SOME field, but different words may match
 //     different fields. This is what lets "speed acceleration inner" find "Inner wall" whose path is
 //     "Process : Speed : Acceleration" (title + source breadcrumb together).
-// full_label is searchable too but never highlighted, since it is not rendered.
+// full_label and canonical plugin kind are searchable aliases. The visible category is also searchable
+// so its own match can be highlighted in plugin rows.
 // A phrase match always outranks a distributed token match.
 function searchActions(actions, query) {
     var q = (query || "").trim();
@@ -251,26 +271,31 @@ function searchActions(actions, query) {
         var g = fieldMatchScore(groupNorm(a), searchNeedle, wwRe);
         var s = fieldMatchScore(sourceNorm(a), searchNeedle, wwRe);
         var f = fieldMatchScore(fullNorm(a), searchNeedle, wwRe);
-        var phrase = scoreFields(t, g, s, f);
+        var p = fieldMatchScore(pluginCategoryNorm(a), searchNeedle, wwRe);
+        var typeMatch = fieldMatchScore(pluginTypeNorm(a), searchNeedle, wwRe);
+        var phrase = scoreFields(t, g, s, f, p, typeMatch);
         var score, ranges;
         if (phrase !== null) {
             score = phrase + SCORE_PHRASE;
-            ranges = { title: t ? t.ranges : null, group: g ? g.ranges : null, source: s ? s.ranges : null };
+            ranges = { title: t ? t.ranges : null, group: g ? g.ranges : null, source: s ? s.ranges : null,
+                       plugin: p ? p.ranges : null };
         } else {
             // Require every token; a token that matches nothing drops the action immediately. Ranges
             // from all matching tokens are merged per field so each matched word highlights.
-            var sum = 0, titleR = null, groupR = null, sourceR = null, all = true;
-            for (var k = 0; k < searchTokens.length; k++) {
-                var m = tokenMatch(a, searchTokens[k], searchTokenRes[k]);
+            var sum = 0, titleR = null, groupR = null, sourceR = null, pluginR = null, all = true;
+            for (var tokenIndex = 0; tokenIndex < searchTokens.length; tokenIndex++) {
+                var m = tokenMatch(a, searchTokens[tokenIndex], searchTokenRes[tokenIndex]);
                 if (!m) { all = false; break; }
                 sum += m.score;
                 if (m.title) (titleR || (titleR = [])).push(m.title);
                 if (m.group) (groupR || (groupR = [])).push(m.group);
                 if (m.source) (sourceR || (sourceR = [])).push(m.source);
+                if (m.plugin) (pluginR || (pluginR = [])).push(m.plugin);
             }
             if (!all) continue;
             score = sum;
-            ranges = { title: mergeRanges(titleR), group: mergeRanges(groupR), source: mergeRanges(sourceR) };
+            ranges = { title: mergeRanges(titleR), group: mergeRanges(groupR), source: mergeRanges(sourceR),
+                       plugin: mergeRanges(pluginR) };
         }
         // Ranges are per-field against the ACTUAL text drawn: title for the row-name, and group (or
         // source when group is empty) for the eyebrow - so highlight offsets stay aligned to the label.
@@ -278,6 +303,7 @@ function searchActions(actions, query) {
             title: ranges.title,
             group: ranges.group,
             source: ranges.source,
+            plugin: ranges.plugin,
             useEyebrowGroup: !!(a.group)
         };
         scored.push({ a: a, s: score });
@@ -390,7 +416,7 @@ function favDigitFromEvent(e) {
 
 function resultCountText(total, shown, query) {
     return (query || "").trim() ?
-        T("sd_result_count", "Showing %s of %s actions", shown, total) :
+        T("sd_result_count", "Showing %s actions", shown) :
         T("sd_result_count_all", "%s actions", total);
 }
 
@@ -461,6 +487,12 @@ function actionCategory(a) {
     return cat || T("sd_other", "Other");
 }
 
+function actionEyebrow(a, typedQuery, isRecent) {
+    if (a && a.kind === "plugin" && (String(typedQuery || "").trim() || isRecent))
+        return T("sd_plugins", "Plugins");
+    return (a && (a.group || a.source)) || "";
+}
+
 // Stable-bucket actions by category, then order the groups alphabetically. Within a group the incoming
 // (frecency) order is kept. Pure so the node-vm test can exercise grouping.
 function groupActions(list) {
@@ -711,7 +743,7 @@ window.HandleStudio = function (payload) {
         builtKey = "";
         if (qEl) {
             qEl.value = "";
-            qEl.placeholder = T("sd_search_n", "Search %s actions", ACTIONS.length);
+            qEl.placeholder = T("sd_search", "Search actions");
             syncClearButton();
         }
         render({ resize: true, resetScroll: true });
@@ -931,12 +963,14 @@ function beginRow(item, i, mono, ariaLabel) {
 function renderActionRow(a, i) {
     var on = FAVS.indexOf(a.id) !== -1;
     var shell = beginRow(a, i, false, actionLabel(a, ACTIONS));
-    var mi = matchIndex[a.id];
-    // The eyebrow shows group when present, else source. Highlight with the ranges of whichever of the
-    // two the eyebrow actually renders (so a "Recent Projects"/"Object" header match lights up like a
-    // setting path does - the offsets are computed against the same string we are marking).
-    var eyebrow = a.group || a.source;
-    var eyebrowMatch = mi ? (mi.useEyebrowGroup ? mi.group : mi.source) : null;
+    var typedQuery = String(query || "").trim();
+    var isRecent = !typedQuery && i < RECENTS.length && RECENTS[i].id === a.id;
+    var mi = typedQuery ? matchIndex[a.id] : null;
+    // Plugin search/recent rows show their category; other rows show their group or source breadcrumb.
+    // Use match ranges from the visible field so category and breadcrumb highlights stay aligned.
+    var showPluginCategory = a.kind === "plugin" && (typedQuery || isRecent);
+    var eyebrow = actionEyebrow(a, query, isRecent);
+    var eyebrowMatch = mi ? (showPluginCategory ? mi.plugin : (mi.useEyebrowGroup ? mi.group : mi.source)) : null;
     shell.left.insertBefore(markedText("row-eyebrow", eyebrow, eyebrowMatch), shell.line);
     shell.line.appendChild(markedText("row-name", a.title, mi ? mi.title : null));
     var badge = modeBadge(a, USER_MODE);
@@ -1376,7 +1410,7 @@ function exitPhase() {
     // It survives a second-phase exit (which never goes through exitPhase from the commands view),
     // so without a reset the cached empty-query key would skip the rebuild and leave stale content.
     builtKey = "";
-    qEl.placeholder = T("sd_search_n", "Search %s actions", ACTIONS.length);
+    qEl.placeholder = T("sd_search", "Search actions");
     render({ resize: true, resetScroll: true });
     qEl.focus();
 }

resources/web/dialog/SpeedDial/speeddial.test.js

@@ -82,6 +82,20 @@ assert.equal(ctx.searchActions(pool, "layer").length >= 2, true,
 assert.equal(ctx.searchActions(pool, "surface")[0].id, "c2",
     "a later-but-precise match still ranks by relevance, not by pool type");
 
+const pluginPool = [
+    { id: "plugin-action", title: "Optimize G-code", source: "Gcode Optimizer", group: "", kind: "plugin" },
+    { id: "command-action", title: "Open Preferences", source: "OrcaSlicer", group: "Commands", kind: "command" }
+];
+assert.deepEqual(ctx.searchActions(pluginPool, "plugin").map(function (a) { return a.id; }), ["plugin-action"],
+    "the plugin kind makes runnable plugin actions searchable by plugin");
+assert.deepEqual(ctx.searchActions(pluginPool, "plugins").map(function (a) { return a.id; }), ["plugin-action"],
+    "the plural Plugins category also finds plugin actions");
+ctx.searchActions(pluginPool, "plugins");
+assert.deepEqual(ctx.matchIndex["plugin-action"].plugin, [[0, 7]],
+    "a category match highlights the visible Plugins label");
+assert.deepEqual(ctx.searchActions(pluginPool, "plugin optimize").map(function (a) { return a.id; }), ["plugin-action"],
+    "plugin kind can match one token while the action title matches another");
+
 // A perfect match (the needle as one contiguous run) outranks a fuzzy match of the same field - and a
 // contiguous GROUP/header hit ("Recent Projects") beats a scattered fuzzy TITLE hit ("Retraction Length"),
 // which is what the old flat title-bonus ranking got backwards.
@@ -188,6 +202,12 @@ assert.equal(ctx.actionCategory({ id: "s", group: "", source: "Filament : Coolin
     "a Filament setting groups under Filament");
 assert.equal(ctx.actionCategory({ id: "plugin_script_action:Foo:bar.py", group: "", source: "Gcode Optimizer", kind: "plugin" }), "Plugins",
     "every plugin shares one Plugins header");
+assert.equal(ctx.actionEyebrow({ group: "", source: "Gcode Optimizer", kind: "plugin" }, "plugin"), "Plugins",
+    "typed results show only the Plugins category");
+assert.equal(ctx.actionEyebrow({ group: "", source: "Gcode Optimizer", kind: "plugin" }, "", true), "Plugins",
+    "recent plugin actions show only the Plugins category");
+assert.equal(ctx.actionEyebrow({ group: "", source: "Gcode Optimizer", kind: "plugin" }, ""), "Gcode Optimizer",
+    "the unfiltered plugin section keeps the source name on non-recent rows");
 assert.equal(ctx.actionCategory({ id: "x", group: "", source: "", kind: "command" }), "Other",
     "a category-less action falls back to Other");
 
@@ -436,4 +456,9 @@ assert.equal(ctx.stateFromPayload({}).tooltipExpanded, true, "expansion defaults
 assert.equal(ctx.stateFromPayload({ tooltip_expanded: false }).tooltipExpanded, false, "a collapsed payload is honored");
 assert.equal(ctx.stateFromPayload({ tooltip_expanded: true }).tooltipExpanded, true, "an expanded payload is honored");
 
+// resultCountText: a search counts the shown matches only ("Showing N actions"); the total is used
+// solely for the empty-query count.
+assert.equal(ctx.resultCountText(100, 3, "lay"), "Showing 3 actions", "a search reports the shown match count only");
+assert.equal(ctx.resultCountText(100, 100, ""), "100 actions", "an empty query reports the total");
+
 console.log("ok");

scripts/flatpak/com.orcaslicer.OrcaSlicer.yml

@@ -331,15 +331,6 @@ modules:
         sha256: deedcabe339165214a3637df4c86a507aef0d793cf8774ff68735f4737e8ddbc
         dest: external-packages/FFMPEG
 
-      # libdatachannel v0.24.5
-      # The Git checkout includes the submodules that are missing from the
-      # GitHub source archive. DataChannel.cmake consumes it as SOURCE_DIR.
-      - type: git
-        url: https://github.com/paullouisageneau/libdatachannel.git
-        tag: v0.24.5
-        commit: 443f6934d9007eb7076ab7825ba330f355fcbead
-        dest: external-packages/DataChannel
-
       # ---------------------------------------------------------------
       # Fallback archives for deps normally provided by the GNOME SDK.
       # These are only used if find_package() fails to locate them.

scripts/test_moonraker_lane_data.py

@@ -24,7 +24,7 @@ NAMESPACE = "lane_data"
 
 # Repo-relative paths for the offline generic-map check
 REPO_ROOT = os.path.dirname(os.path.dirname(os.path.abspath(__file__)))
-AMS_PAYLOAD_CPP = os.path.join(REPO_ROOT, "src", "slic3r", "Utils", "AmsPayload.cpp")
+MOONRAKER_AGENT_CPP = os.path.join(REPO_ROOT, "src", "slic3r", "Utils", "MoonrakerPrinterAgent.cpp")
 OFL_FILAMENT_DIR = os.path.join(REPO_ROOT, "resources", "profiles", "OrcaFilamentLibrary", "filament")
 LANE_KEYS = [f"lane{i}" for i in range(1, 9)]  # lane1-lane8
 MATERIALS = ["PLA", "ABS", "PETG", "ASA", "ASA Sparkle", "TPU", ""]
@@ -41,16 +41,16 @@ MATERIAL_TEMPS = {
 }
 
 def parse_cpp_type_map():
-    """Extract the normalized-type -> OFL generic family table from AmsPayload.cpp.
+    """Extract the normalized-type -> OFL generic family table from MoonrakerPrinterAgent.cpp.
 
-    Reads map_filament_type_to_generic_id's type_to_ofl_family initializer so the
-    check tracks the C++ normalization without a duplicated list.
+    Reads MoonrakerPrinterAgent::map_filament_type_to_generic_id's type_to_ofl_family
+    initializer so the check tracks the C++ normalization without a duplicated list.
     """
-    with open(AMS_PAYLOAD_CPP, encoding="utf-8") as f:
+    with open(MOONRAKER_AGENT_CPP, encoding="utf-8") as f:
         src = f.read()
     m = re.search(r"type_to_ofl_family\s*=\s*\{(.*?)\n\s*\};", src, re.DOTALL)
     if not m:
-        raise RuntimeError(f"type_to_ofl_family table not found in {AMS_PAYLOAD_CPP}")
+        raise RuntimeError(f"type_to_ofl_family table not found in {MOONRAKER_AGENT_CPP}")
     pairs = re.findall(r'\{\s*"([^"]+)"\s*,\s*"([^"]+)"\s*\}', m.group(1))
     if not pairs:
         raise RuntimeError("type_to_ofl_family table parsed empty")

scripts/tests/test_filament_id.py

@@ -405,6 +405,20 @@ class TestTripleResolution(unittest.TestCase):
         self.assertEqual(afi.resolve_triple("MyPLA @P1", fmap, {}),
                          ("MyVendor", "PLA", "MyPLA"))
 
+    def test_split_vendor_and_type_bases_resolve(self):
+        # A partial base is normal, not an error: vendor and type may live on
+        # different ancestors, with an intermediate supplying neither (the
+        # Snapmaker shape). The pair is complete at the instantiated preset.
+        recs = [
+            self.rec("APLA @P1", inherits="mid"),
+            self.rec("mid", inherits="typebase"),
+            self.rec("typebase", filament_type=["PLA"], inherits="vendorbase"),
+            self.rec("vendorbase", filament_vendor=["AV"]),
+        ]
+        fmap = {r["name"]: r for r in recs}
+        self.assertEqual(afi.resolve_triple("APLA @P1", fmap, {}),
+                         ("AV", "PLA", "APLA"))
+
 
 # ---------------------------------------------------------------------------
 # checks on synthetic trees
@@ -417,6 +431,24 @@ class TestChecks(OfCleanTreeCase):
         self.assertNotIn("[ERROR]", out)
         self.assertNotIn("[WARNING]", out)
 
+    def test_instantiated_preset_over_partial_bases_is_silent(self):
+        # Vendor and type split across two non-instantiated bases, an
+        # intermediate base with neither: base profiles are allowed to be
+        # partial. Only the instantiated preset must resolve both.
+        self.t.write_preset("VendorA", preset("XPLA vendorbase", instantiation=False,
+                                              filament_vendor="XV"))
+        self.t.write_preset("VendorA", preset("XPLA typebase", instantiation=False,
+                                              filament_type="PLA",
+                                              inherits="XPLA vendorbase"))
+        self.t.write_preset("VendorA", preset("XPLA mid", instantiation=False,
+                                              inherits="XPLA typebase"))
+        self.t.write_preset("VendorA", preset(
+            "XPLA @P1", inherits="XPLA mid",
+            filament_id=afi.generate_filament_id("XV", "PLA", "XPLA"),
+            compatible_printers=["P1"]))
+        errors, out = self.t.check()
+        self.assertEqual(errors, 0, out)
+
     def test_check1_unknown_non_of_id(self):
         self.t.write_preset("VendorA", preset("BPLA @base", filament_id="BOGUS_9",
                                               instantiation=False,
@@ -1523,6 +1555,19 @@ class TestRealTree(unittest.TestCase):
         self.assertEqual(analysis["missing_effective"], [])
         self.assertEqual(analysis["read_errors"], [])
 
+    def test_every_instantiated_filament_resolves_vendor_and_type(self):
+        # The property the web guide resolves at load: a partial base is fine as
+        # long as the instantiated preset ends up with both fields. Guards the
+        # split-base bundles (Snapmaker, Anker, SeeMeCNC).
+        analysis = afi.analyze_tree(REAL_PROFILES)
+        unresolved = [
+            (vendor, rec["name"], rec["triple"][0], rec["triple"][1])
+            for vendor, filaments in analysis["vendors"].items()
+            for rec in filaments.values()
+            if rec["instantiation"] and not (rec["triple"][0] and rec["triple"][1])
+        ]
+        self.assertEqual(unresolved, [])
+
 # ---------------------------------------------------------------------------
 # review-fix regressions
 # ---------------------------------------------------------------------------

src/libslic3r/Preset.cpp

@@ -3456,7 +3456,7 @@ size_t PresetCollection::first_visible_idx() const
     return first_visible;
 }
 
-size_t PresetCollection::first_matching_filament_idx(const std::string& filament_type) const
+size_t PresetCollection::first_visible_idx_by_type(const std::string& filament_type) const
 {
     size_t start = m_default_suppressed ? m_num_default_presets : 0;
 
@@ -3481,17 +3481,14 @@ size_t PresetCollection::first_matching_filament_idx(const std::string& filament
     //    e.g. "PLA High Speed" -> "PLA"
     //    Dash-separated types like "PA-CF", "PET-CF" are distinct materials, not modifiers.
     auto sep = filament_type.find(' ');
-    if (sep != std::string::npos)
-        return find_by_type(filament_type.substr(0, sep));
+    if (sep != std::string::npos) {
+        idx = find_by_type(filament_type.substr(0, sep));
+        if (idx != size_t(-1))
+            return idx;
+    }
 
-    return size_t(-1);
-}
-
-size_t PresetCollection::first_visible_idx_by_type(const std::string& filament_type) const
-{
-    size_t idx = first_matching_filament_idx(filament_type);
     // 3. Any visible preset
-    return idx != size_t(-1) ? idx : first_visible_idx();
+    return first_visible_idx();
 }
 
 std::string PresetCollection::filament_id_by_type(const std::string& filament_type) const
@@ -3499,15 +3496,6 @@ std::string PresetCollection::filament_id_by_type(const std::string& filament_ty
     return preset(first_visible_idx_by_type(filament_type)).filament_id;
 }
 
-bool PresetCollection::filament_id_by_type(const std::string& filament_type, std::string& out) const
-{
-    size_t idx = first_matching_filament_idx(filament_type);
-    if (idx == size_t(-1))
-        return false;
-    out = preset(idx).filament_id;
-    return true;
-}
-
 std::vector<std::string> PresetCollection::diameters_of_selected_printer()
 {
     std::set<std::string> diameters;

src/libslic3r/Preset.hpp

@@ -756,11 +756,6 @@ public:
     size_t first_visible_idx_by_type(const std::string& filament_type) const;
     // Return the filament_id of the best-matching visible preset for the given filament type.
     std::string filament_id_by_type(const std::string& filament_type) const;
-    // As above, but returns false (and leaves `out` untouched) when no preset
-    // matches instead of falling back to first_visible_idx(). The fallback is a
-    // plain first-visible/PLA preset, which would bind an unknown material to an
-    // unrelated default.
-    bool filament_id_by_type(const std::string& filament_type, std::string& out) const;
     // Return index of the first compatible preset. Certainly at least the '- default -' preset shall be compatible.
     // If one of the prefered_alternates is compatible, select it.
     template<typename PreferedCondition> size_t first_compatible_idx(PreferedCondition prefered_condition) const
@@ -894,10 +889,6 @@ protected:
     void            set_custom_preset_alias(Preset &preset);
 
 private:
-    // Index of the first visible, compatible, system base preset matching
-    // filament_type (exact, then base type), or (size_t)-1 when none matches.
-    size_t first_matching_filament_idx(const std::string& filament_type) const;
-
     std::string canonical_preset_name(const std::string &name, const PresetOrigin &load_origin = PresetOrigin()) const;
 
     // Comparator that sorts "Generic " prefixed presets before others, then alphabetically within each group.

src/libslic3r/PresetBundle.cpp

@@ -3824,6 +3824,7 @@ unsigned int PresetBundle::sync_ams_list(std::vector<std::pair<DynamicPrintConfi
     ConfigOptionStrings *filament_color_type = project_config.option<ConfigOptionStrings>("filament_colour_type");
     ConfigOptionInts *   filament_map = project_config.option<ConfigOptionInts>("filament_map");
     ConfigOptionInts *   filament_volume_map = project_config.option<ConfigOptionInts>("filament_volume_map");
+
     // Snapshot and temporarily strip mixed filament slots so AMS sync operates on physical
     // filaments only. A mixed slot is virtual and has no tray to sync against; leaving it in
     // would let AMS mapping overwrite it and would break the physical-first slot ordering the

src/slic3r/CMakeLists.txt

@@ -236,7 +236,6 @@ set(SLIC3R_GUI_SOURCES
     GUI/GLToolbar.hpp
     GUI/ImageDPIFrame.cpp
     GUI/ImageDPIFrame.hpp
-    GUI/IMediaController.hpp
     GUI/GUI_App.cpp
     GUI/GUI_App.hpp
     GUI/GUI_AuxiliaryList.cpp
@@ -287,6 +286,8 @@ set(SLIC3R_GUI_SOURCES
     GUI/FilamentMapDialog.hpp
     GUI/IconManager.cpp
     GUI/IconManager.hpp
+    GUI/IdleScheduler.cpp
+    GUI/IdleScheduler.hpp
     GUI/ImageGrid.cpp
     GUI/ImageGrid.h
     GUI/ImGuiWrapper.cpp
@@ -348,6 +349,10 @@ set(SLIC3R_GUI_SOURCES
     GUI/KBShortcutsDialog.hpp
     GUI/KeyChord.cpp
     GUI/KeyChord.hpp
+    GUI/Lazy.cpp
+    GUI/Lazy.hpp
+    GUI/LazyPage.cpp
+    GUI/LazyPage.hpp
     GUI/LibVGCode/LibVGCodeWrapper.hpp
     GUI/LibVGCode/LibVGCodeWrapper.cpp
     GUI/LinuxDisplayBackend.cpp
@@ -360,8 +365,6 @@ set(SLIC3R_GUI_SOURCES
     GUI/MediaFilePanel.h
     GUI/MediaPlayCtrl.cpp
     GUI/MediaPlayCtrl.h
-    GUI/WebRtcMediaController.cpp
-    GUI/WebRtcMediaController.hpp
     GUI/MeshUtils.cpp
     GUI/MeshUtils.hpp
     GUI/ModelMall.cpp
@@ -436,6 +439,7 @@ set(SLIC3R_GUI_SOURCES
     GUI/Plater.hpp
     GUI/PlateSettingsDialog.cpp
     GUI/PlateSettingsDialog.hpp
+    GUI/PrebuildQueue.hpp
     GUI/Preferences.cpp
     GUI/Preferences.hpp
     GUI/PresetBundleDialog.cpp
@@ -515,6 +519,7 @@ set(SLIC3R_GUI_SOURCES
     GUI/SliceInfoPanel.hpp
     GUI/SlicingProgressNotification.cpp
     GUI/SlicingProgressNotification.hpp
+    GUI/StagedBuild.hpp
     GUI/StatusPanel.cpp
     GUI/StatusPanel.hpp
     GUI/StepMeshDialog.cpp
@@ -555,8 +560,6 @@ set(SLIC3R_GUI_SOURCES
     GUI/WebUserLoginDialog.hpp
     GUI/WebViewDialog.cpp
     GUI/WebViewDialog.hpp
-    GUI/WebMediaController.hpp
-    GUI/WebMediaController.cpp
     GUI/Widgets/AMSControl.cpp
     GUI/Widgets/AMSControl.hpp
     GUI/Widgets/AMSItem.cpp
@@ -751,17 +754,10 @@ set(SLIC3R_GUI_SOURCES
     Utils/NetworkAgentFactory.cpp
     Utils/ICloudServiceAgent.hpp
     Utils/IPrinterAgent.hpp
-    Utils/ICameraSignalingChannel.hpp
     Utils/OrcaCloudServiceAgent.cpp
     Utils/OrcaCloudServiceAgent.hpp
-    Utils/OrcaMqttConnection.cpp
-    Utils/OrcaMqttConnection.hpp
     Utils/OrcaPrinterAgent.cpp
     Utils/OrcaPrinterAgent.hpp
-    Utils/AmsPayload.cpp
-    Utils/AmsPayload.hpp
-    Utils/OrcaCloudSignalingChannel.cpp
-    Utils/OrcaCloudSignalingChannel.hpp
     Utils/QidiPrinterAgent.cpp
     Utils/QidiPrinterAgent.hpp
     Utils/SnapmakerPrinterAgent.cpp
@@ -902,7 +898,7 @@ target_include_directories(libslic3r_gui PRIVATE Utils ${CMAKE_CURRENT_BINARY_DI
 
 if (WIN32)
     target_include_directories(libslic3r_gui SYSTEM PRIVATE ${CMAKE_CURRENT_SOURCE_DIR}/../../deps/WebView2/include)
-    target_link_libraries(libslic3r_gui Advapi32 Crypt32)
+    target_link_libraries(libslic3r_gui Advapi32)
 endif()
 
 source_group(TREE ${CMAKE_CURRENT_SOURCE_DIR} FILES ${SLIC3R_GUI_SOURCES})
@@ -928,7 +924,7 @@ else()
     set(_opengl_link_lib OpenGL::GL)
 endif()
 
-target_link_libraries(libslic3r_gui libslic3r cereal::cereal imgui imguizmo minilzo libvgcode md4c-html glad ${_opengl_link_lib} hidapi mdns ${wxWidgets_LIBRARIES} glfw libcurl OpenSSL::SSL OpenSSL::Crypto LibDataChannel::LibDataChannel noise::noise pybind11::embed)
+target_link_libraries(libslic3r_gui libslic3r cereal::cereal imgui imguizmo minilzo libvgcode md4c-html glad ${_opengl_link_lib} hidapi mdns ${wxWidgets_LIBRARIES} glfw libcurl OpenSSL::SSL OpenSSL::Crypto noise::noise pybind11::embed)
 
 if (CMAKE_SYSTEM_NAME STREQUAL "Linux")
     # Linux finds wxWidgets in module mode, whose include dirs and definitions
@@ -985,32 +981,29 @@ endif ()
 
 if (APPLE)
     # Static FFmpeg from the deps install: nothing to bundle into the .app,
-    # no rpath/install_name handling. Order matters: avformat -> avcodec -> swscale -> avutil.
-    find_library(LIBAVFORMAT_LIBRARY NAMES libavformat.a PATHS ${CMAKE_PREFIX_PATH}/lib NO_DEFAULT_PATH)
+    # no rpath/install_name handling. Order matters: avcodec -> swscale -> avutil.
     find_library(LIBAVCODEC_LIBRARY NAMES libavcodec.a PATHS ${CMAKE_PREFIX_PATH}/lib NO_DEFAULT_PATH)
     find_library(LIBSWSCALE_LIBRARY NAMES libswscale.a PATHS ${CMAKE_PREFIX_PATH}/lib NO_DEFAULT_PATH)
     find_library(LIBAVUTIL_LIBRARY NAMES libavutil.a PATHS ${CMAKE_PREFIX_PATH}/lib NO_DEFAULT_PATH)
-    if (NOT LIBAVFORMAT_LIBRARY OR NOT LIBAVCODEC_LIBRARY OR NOT LIBSWSCALE_LIBRARY OR NOT LIBAVUTIL_LIBRARY)
-        message(FATAL_ERROR "Static FFmpeg (libavformat.a/libavcodec.a/libswscale.a/libavutil.a) not found under ${CMAKE_PREFIX_PATH}/lib. Rebuild the deps — FFMPEG builds static-only on macOS.")
+    if (NOT LIBAVCODEC_LIBRARY OR NOT LIBSWSCALE_LIBRARY OR NOT LIBAVUTIL_LIBRARY)
+        message(FATAL_ERROR "Static FFmpeg (libavcodec.a/libswscale.a/libavutil.a) not found under ${CMAKE_PREFIX_PATH}/lib. Rebuild the deps — FFMPEG builds static-only on macOS.")
     endif ()
-    target_link_libraries(libslic3r_gui ${LIBAVFORMAT_LIBRARY} ${LIBAVCODEC_LIBRARY} ${LIBSWSCALE_LIBRARY} ${LIBAVUTIL_LIBRARY})
+    target_link_libraries(libslic3r_gui ${LIBAVCODEC_LIBRARY} ${LIBSWSCALE_LIBRARY} ${LIBAVUTIL_LIBRARY})
     target_include_directories(libslic3r_gui SYSTEM PRIVATE ${CMAKE_PREFIX_PATH}/include)
 elseif (WIN32)
     # Prebuilt shared FFmpeg from the deps install. Windows has no pkg-config,
     # so resolve the import libraries out of the deps prefix directly; the DLLs
     # are copied next to the executable by the top level CMakeLists.
-    find_library(LIBAVFORMAT_LIBRARY NAMES avformat PATHS ${CMAKE_PREFIX_PATH}/lib NO_DEFAULT_PATH)
     find_library(LIBAVCODEC_LIBRARY NAMES avcodec PATHS ${CMAKE_PREFIX_PATH}/lib NO_DEFAULT_PATH)
     find_library(LIBSWSCALE_LIBRARY NAMES swscale PATHS ${CMAKE_PREFIX_PATH}/lib NO_DEFAULT_PATH)
     find_library(LIBAVUTIL_LIBRARY NAMES avutil PATHS ${CMAKE_PREFIX_PATH}/lib NO_DEFAULT_PATH)
-    if (NOT LIBAVFORMAT_LIBRARY OR NOT LIBAVCODEC_LIBRARY OR NOT LIBSWSCALE_LIBRARY OR NOT LIBAVUTIL_LIBRARY)
-        message(FATAL_ERROR "FFmpeg (avformat/avcodec/swscale/avutil) not found under ${CMAKE_PREFIX_PATH}/lib. Rebuild the deps.")
+    if (NOT LIBAVCODEC_LIBRARY OR NOT LIBSWSCALE_LIBRARY OR NOT LIBAVUTIL_LIBRARY)
+        message(FATAL_ERROR "FFmpeg (avcodec/swscale/avutil) not found under ${CMAKE_PREFIX_PATH}/lib. Rebuild the deps.")
     endif ()
-    target_link_libraries(libslic3r_gui ${LIBAVFORMAT_LIBRARY} ${LIBAVCODEC_LIBRARY} ${LIBSWSCALE_LIBRARY} ${LIBAVUTIL_LIBRARY})
+    target_link_libraries(libslic3r_gui ${LIBAVCODEC_LIBRARY} ${LIBSWSCALE_LIBRARY} ${LIBAVUTIL_LIBRARY})
     target_include_directories(libslic3r_gui SYSTEM PRIVATE ${CMAKE_PREFIX_PATH}/include)
 else ()
     pkg_check_modules(LIBAV REQUIRED IMPORTED_TARGET
-        libavformat
         libavcodec
         libswscale
         libavutil

src/slic3r/GUI/AVVideoDecoder.cpp

@@ -45,25 +45,6 @@ int AVVideoDecoder::open(Bambu_StreamInfo const &info)
     return 0;
 }
 
-int AVVideoDecoder::open(AVCodecParameters const &parameters)
-{
-    if (avcodec_parameters_to_context(codec_ctx_, &parameters) < 0)
-        return -1;
-
-    auto codec = avcodec_find_decoder(codec_ctx_->codec_id);
-    if (codec == nullptr) {
-        fprintf(stderr, "AVVideoDecoder: unsupported codec!\n");
-        return -1;
-    }
-    if (avcodec_open2(codec_ctx_, codec, nullptr) < 0) {
-        fprintf(stderr, "AVVideoDecoder: could not open codec\n");
-        return -1;
-    }
-
-    frame_ = av_frame_alloc();
-    return frame_ == nullptr ? -1 : 0;
-}
-
 int AVVideoDecoder::decode(const Bambu_Sample &sample)
 {
     int ret = -1;
@@ -90,14 +71,6 @@ int AVVideoDecoder::decode(const Bambu_Sample &sample)
     return ret;
 }
 
-int AVVideoDecoder::decode(const AVPacket &packet)
-{
-    int ret = avcodec_send_packet(codec_ctx_, &packet);
-    if (ret == 0)
-        got_frame_ = avcodec_receive_frame(codec_ctx_, frame_) == 0;
-    return ret;
-}
-
 int AVVideoDecoder::flush()
 {
     int ret = avcodec_send_packet(codec_ctx_, nullptr);

src/slic3r/GUI/AVVideoDecoder.hpp

@@ -23,10 +23,8 @@ public:
 
 public:
     int  open(Bambu_StreamInfo const &info);
-    int  open(AVCodecParameters const &parameters);
 
     int  decode(Bambu_Sample const &sample);
-    int  decode(AVPacket const &packet);
 
     int  flush();
 
@@ -36,14 +34,6 @@ public:
 
     bool toWxBitmap(wxBitmap &bitmap, wxSize const & size);
 
-    // Native size of the most recently decoded frame, or an unspecified size if
-    // nothing has decoded yet. Lets a caller learn the video dimensions when the
-    // container/probe could not report them up front.
-    wxSize decoded_frame_size() const
-    {
-        return got_frame_ && frame_ ? wxSize{frame_->width, frame_->height} : wxSize{};
-    }
-
 private:
     AVCodecContext *codec_ctx_ = nullptr;
     AVFrame *       frame_     = nullptr;

src/slic3r/GUI/Auxiliary.cpp

@@ -863,17 +863,27 @@ void AuxiliaryPanel::init_tabpanel()
     m_tabpanel->SetBackgroundColour(wxColour("#FEFFFF"));
     m_tabpanel->Bind(wxEVT_BOOKCTRL_PAGE_CHANGED, [](wxBookCtrlEvent &e) { /* Event handling */ });
 
-    m_designer_panel          = new DesignerPanel(m_tabpanel, AuxiliaryFolderType::DESIGNER);
-    m_pictures_panel          = new AuFolderPanel(m_tabpanel, AuxiliaryFolderType::MODEL_PICTURE);
-    m_bill_of_materials_panel = new AuFolderPanel(m_tabpanel, AuxiliaryFolderType::BILL_OF_MATERIALS);
-    m_assembly_panel          = new AuFolderPanel(m_tabpanel, AuxiliaryFolderType::ASSEMBLY_GUIDE);
-    m_others_panel            = new AuFolderPanel(m_tabpanel, AuxiliaryFolderType::OTHERS);
-
-    m_tabpanel->AddPage(m_designer_panel, _L("Basic Info"), true);
-    m_tabpanel->AddPage(m_pictures_panel, _L("Pictures"), false);
-    m_tabpanel->AddPage(m_bill_of_materials_panel, _L("Bill of Materials"), false);
-    m_tabpanel->AddPage(m_assembly_panel, _L("Assembly Guide"), false);
-    m_tabpanel->AddPage(m_others_panel, _L("Others"), false);
+    add_build_step([this] {
+        m_designer_panel = new DesignerPanel(m_tabpanel, AuxiliaryFolderType::DESIGNER);
+        m_tabpanel->AddPage(m_designer_panel, _L("Basic Info"), true);
+    });
+    add_build_step([this] {
+        m_pictures_panel = new AuFolderPanel(m_tabpanel, AuxiliaryFolderType::MODEL_PICTURE);
+        m_tabpanel->AddPage(m_pictures_panel, _L("Pictures"), false);
+    });
+    add_build_step([this] {
+        m_bill_of_materials_panel = new AuFolderPanel(m_tabpanel, AuxiliaryFolderType::BILL_OF_MATERIALS);
+        m_tabpanel->AddPage(m_bill_of_materials_panel, _L("Bill of Materials"), false);
+    });
+    add_build_step([this] {
+        m_assembly_panel = new AuFolderPanel(m_tabpanel, AuxiliaryFolderType::ASSEMBLY_GUIDE);
+        m_tabpanel->AddPage(m_assembly_panel, _L("Assembly Guide"), false);
+    });
+    add_build_step([this] {
+        m_others_panel = new AuFolderPanel(m_tabpanel, AuxiliaryFolderType::OTHERS);
+        m_tabpanel->AddPage(m_others_panel, _L("Others"), false);
+        Layout();
+    });
 }
 
 wxWindow *AuxiliaryPanel::create_side_tools()

src/slic3r/GUI/Auxiliary.hpp

@@ -46,6 +46,7 @@
 #include "slic3r/GUI/UpgradePanel.hpp"
 #include "slic3r/GUI/AmsWidgets.hpp"
 #include "Widgets/SideTools.hpp"
+#include "StagedBuild.hpp"
 
 #define AUFILE_GREY700 wxColour(107, 107, 107)
 #define AUFILE_GREY500 wxColour(158, 158, 158)
@@ -194,7 +195,7 @@ public:
 };
 
 
-class AuxiliaryPanel : public wxPanel
+class AuxiliaryPanel : public wxPanel, public StagedBuild
 {
 private:
     Tabbook *m_tabpanel = {nullptr};

src/slic3r/GUI/CAD/DesignPanel.hpp

@@ -12,6 +12,7 @@
 
 #include "libslic3r/CAD/CadDocument.hpp"
 #include "slic3r/GUI/CAD/DesignInteraction.hpp"   // CadLevel: what one Esc press means
+#include "slic3r/GUI/Lazy.hpp"
 
 class ComboBox;    // Orca dropdown (Widgets/ComboBox.hpp) — replaces wxChoice everywhere here
 class StaticBox;   // Orca rounded card frame (Widgets/StaticBox.hpp)
@@ -46,7 +47,7 @@ class DesignCanvas;
 // Design (CAD) tab: a sketch-first, Onshape-style form-driven CAD panel.
 // Sketch and Extrude are independent tools: the user creates a Sketch first,
 // then selects it and Extrudes to produce a solid.
-class DesignPanel : public wxPanel
+class DesignPanel : public wxPanel, public LazyInstance<DesignPanel>
 {
 public:
     explicit DesignPanel(wxWindow* parent);

src/slic3r/GUI/CAD/McpControl.cpp

@@ -1989,11 +1989,10 @@ json action_set_feature_expr(DesignPanel* panel, const json& params)
 // Dispatch one parsed request ON THE MAIN THREAD. Returns a JSON-RPC reply string.
 std::string handle_on_main(const std::string& method, const json& params, const json& id)
 {
-    MainFrame* mf = wxGetApp().mainframe;
     // The panel is built on first use, and in a headless session nobody clicks the tab that
     // would build it -- so build it here rather than refusing. Safe: this runs on the main
     // thread (see the CallAfter that dispatches us).
-    DesignPanel* panel = mf ? mf->ensure_design_panel() : nullptr;
+    DesignPanel* panel = DesignPanel::ensure();
     if (!panel)
         return rpc_error(id, -32001, "Design panel not ready");