Flag Global Usings in Headers with clang-tidy

A using-directive or using-declaration in the global namespace of a
header reaches every file that includes it, and a using-declaration also
makes the include checker treat that header as the one to include for
the name. google-global-names-in-headers reports both, on changed lines
like the existing check, so headers that still have one are not held to
it until the line is touched.

The check does not see a using inside a namespace.

clang_tidy_diff.py's closing message assumed every finding was a missing
include; it now says other findings need a manual fix.

.clang-tidy

@@ -1,10 +1,15 @@
 # clang-tidy configuration, enforced by the clang-tidy CI job on the lines a pull
-# request changes (scripts/clang_tidy_diff.py). Only missing includes are reported
-# for now: a file should include the header for every symbol it uses, not rely on
-# the precompiled header or another header's includes. Run with --fix to add them.
+# request changes (scripts/clang_tidy_diff.py). Two things are reported.
+# Missing includes: a file should include the header for every symbol it uses, not
+# rely on the precompiled header or another header's includes. Run with --fix to
+# add them.
+# Using-directives and using-declarations in the global namespace of a header:
+# they reach every file that includes the header, and a using-declaration also
+# makes the header look like the one to include for that name. Qualify the name
+# in the header, and put the using in the source files that want it.
 # Every check listed here gates pull requests, so enable a new one only once the
 # code it flags on touched lines is reasonable to fix in passing.
-Checks: '-*,misc-include-cleaner'
+Checks: '-*,misc-include-cleaner,google-global-names-in-headers'
 WarningsAsErrors: '*'
 CheckOptions:
   # Missing includes only. Builds without the precompiled header break on these.

.github/workflows/check_profiles.yml

@@ -74,26 +74,12 @@ jobs:
           set +e
           ./OrcaSlicer_profile_validator -p ${{ github.workspace }}/resources/profiles -l 2 2>&1 | tee ${{ runner.temp }}/validate_system.log
           exit ${PIPESTATUS[0]}
-      # The validator above is the nightly build of main, so it cannot slice profiles that use
-      # settings a PR adds to the engine: it reports their placeholders as undefined. A PR that
-      # changes src/ also runs Build all, whose Slice check runs this same sweep with the
-      # validator built from the PR, so the sweep below only runs for the other PRs.
-      - name: Detect engine changes
-        id: engine_changes
-        if: ${{ github.event_name == 'pull_request' }}
-        run: |
-          base=${{ github.event.pull_request.base.sha }}
-          if git fetch --no-tags --depth=1 origin "$base" && ! git diff --quiet "$base" HEAD -- src/; then
-            echo "changed=true" >> "$GITHUB_OUTPUT"
-            echo "::notice::This PR changes src/, so Build all's Slice check slices the profiles with the PR-built validator."
-          fi
       # Slice a two-colour cube through every printer, and through every system process/filament whose
       # templates no printer's own slice reaches, so every custom g-code and filename_format shipped is
       # expanded (names in {if} branches not taken included) - catches undefined-placeholder /
       # invalid-flow bugs the static checks above cannot see.
       - name: validate slice (expand custom g-code)
         id: validate_slice
-        if: ${{ steps.engine_changes.outputs.changed != 'true' }}
         continue-on-error: true
         run: |
           set +e

.github/workflows/post_merge_profiles.yml

@@ -303,7 +303,7 @@ jobs:
       - name: Mint profiles-repo token
         id: token
         if: steps.vendors.outputs.vendors != ''
-        uses: actions/create-github-app-token@v3
+        uses: actions/create-github-app-token@v1
         with:
           app-id: ${{ secrets.PROFILES_APP_ID }}
           private-key: ${{ secrets.PROFILES_APP_PRIVATE_KEY }}

.github/workflows/pr-label-bot.yml

@@ -96,7 +96,7 @@ jobs:
       issues: write
     runs-on: ubuntu-latest
     steps:
-      - name: Auto-label localization changes and remind contributors about the glossary
+      - name: Auto-label and remind about the localization glossary
         uses: actions/github-script@v9
         with:
           script: |
@@ -106,37 +106,37 @@ jobs:
 
             const pr = context.payload.pull_request;
 
-            // Mirrors the `localization/**` paths filter in check_locale.yml
+            // List changed files once (mirrors the `localization/**` paths filter in check_locale.yml)
             const files = await github.paginate(github.rest.pulls.listFiles, {
               owner: context.repo.owner,
               repo: context.repo.repo,
               pull_number: pr.number,
               per_page: 100
             });
-            if (!files.some((file) => file.filename.startsWith('localization/'))) {
-              core.info('No localization changes detected; skipping Localization label.');
-              return;
-            }
+            const touchesLocalization = files.some((file) => file.filename.startsWith('localization/'));
+            const onlyPoFiles = files.length > 0 && files.every((file) => file.filename.endsWith('.po'));
 
-            try {
-              await github.rest.issues.addLabels({
-                owner: context.repo.owner,
-                repo: context.repo.repo,
-                issue_number: pr.number,
-                labels: ['Localization']
-              });
-              core.info('Applied Localization label.');
-            } catch (error) {
-              if (isPermissionDenied(error)) {
-                core.warning('Cannot add Localization label because token cannot write.');
-              } else {
-                throw error;
+            // If the PR changes only .po files, automatically apply the Localization label
+            if (onlyPoFiles) {
+              try {
+                await github.rest.issues.addLabels({
+                  owner: context.repo.owner,
+                  repo: context.repo.repo,
+                  issue_number: pr.number,
+                  labels: ['Localization']
+                });
+                core.info('Applied Localization label (PR changes only .po files).');
+              } catch (error) {
+                if (isPermissionDenied(error)) {
+                  core.warning('Cannot add Localization label because token cannot write.');
+                } else {
+                  throw error;
+                }
               }
             }
 
-            // Collaborators know the glossary; only remind outside contributors
-            if (['COLLABORATOR', 'OWNER', 'MEMBER'].includes(pr.author_association)) {
-              core.info('Author is a collaborator; skipping glossary reminder.');
+            if (!touchesLocalization) {
+              core.info('No localization changes detected; skipping glossary reminder.');
               return;
             }
 

.github/workflows/update-translation.yml

@@ -13,7 +13,7 @@ jobs:
         uses: actions/checkout@v7
 
       - name: Setup Python
-        uses: actions/setup-python@v7
+        uses: actions/setup-python@v6
         with:
           python-version: '3.12'
 

deps_src/libnest2d/include/libnest2d/placers/nfpplacer.hpp

@@ -88,18 +88,6 @@ struct NfpPConfig {
      */
     bool explore_holes = false;
 
-    /**
-     * @brief Keep the final pile on the bin.
-     *
-     * The final alignment centres the pile on the alignment target. A target
-     * near an edge (a belt printer starts its parts at the leading end of the
-     * belt) would push part of a pile that is larger than the room around that
-     * point off the bed; with this set the pile stops at the edge instead, and a
-     * pile that does not fit along an axis is centred on it. Off by default, so
-     * the alignment of every other printer is unchanged.
-     */
-    bool clamp_to_bin = false;
-
     /**
      * @brief If true, use all CPUs available. Run on a single core otherwise.
      */
@@ -1123,24 +1111,7 @@ private:
         default: ; // DONT_ALIGN
         }
 
-        auto d = cb - ci;
-
-        // Keep the pile on the bin (see Config::clamp_to_bin). The items' boxes carry
-        // their inflation, which is the margin left at the edge.
-        if (config_.clamp_to_bin) {
-            auto on_bin = [](Coord lo, Coord hi, Coord bin_lo, Coord bin_hi, Coord shift) {
-                if (hi - lo >= bin_hi - bin_lo)
-                    return (bin_lo + bin_hi) / 2 - (lo + hi) / 2;
-                if (lo + shift < bin_lo)
-                    shift = bin_lo - lo;
-                if (hi + shift > bin_hi)
-                    shift = bin_hi - hi;
-                return shift;
-            };
-            setX(d, on_bin(getX(bb.minCorner()), getX(bb.maxCorner()), getX(bbin.minCorner()), getX(bbin.maxCorner()), getX(d)));
-            setY(d, on_bin(getY(bb.minCorner()), getY(bb.maxCorner()), getY(bbin.minCorner()), getY(bbin.maxCorner()), getY(d)));
-            cb = ci + d;
-        }
+        auto d = cb - ci;       
 
         // BBS make sure the item won't clash with excluded regions
         // do we have wipe tower after arranging?

docs/CAD/design/SKETCHER_TOOL_ARCHITECTURE.md

@@ -262,9 +262,9 @@ and a band is not a "gesture" in the `CadLevel::Gesture` sense because nothing h
 |---|---|---|---|---|---|
 | `Move` | — | `update_hover` / `update_solid_hover` (**non-consuming**, returns false) | — | passthrough | hover only asks for a repaint, `:10022-10025` |
 | `LeftDown` | orbit may begin | latch press, **return false** | — | consume-or-orbit is the canvas's call | `:10058-10063`; consuming here killed orbit once already |
-| `LeftDrag` > 8 px | — | start + drive band, **consume**, when Shift is held or the left button has no camera action | — | otherwise the left button's drag action (Preferences > Control) | the band is Prepare's Shift+left-drag rectangle selection |
+| `LeftDrag` > 8 px | — | start + drive band, **consume** | — | no longer orbits in this canvas | middle-drag orbits, right-drag pans (`:10013-10016`) |
 | `LeftUp` | — | commit pick **or** resolve band | — | — | `:10035-10041` |
-| `MiddleDrag` / `RightDrag` | — | must not see it | — | the button's drag action (Preferences > Control) | camera gestures never reach the FSM; a right press reaches the tool only once its release shows it was a click |
+| `MiddleDrag` / `RightDrag` | — | must not see it | — | orbit / pan | camera gestures never reach the FSM |
 | `RightClick` | — | — | offer menu | — | `snaporca-xmh6` open: a right-click that only clears the sketch selection eats the offer |
 | `Esc` | — | — | `escape()` ladder | — | one route whatever holds focus (`:4228-4231`) |
 | `Del` / `Backspace` | — | `delete_selected_or_last_sketch_entity()` | char hook | — | `:4260` |

docs/HLSD/design-tab.md

@@ -135,7 +135,7 @@ contract between them is stated in code rather than spread across handlers.
 | --- | --- | --- |
 | `Transient` | a value field or a popup menu | closes it; the tool stays armed |
 | `Gesture` | an uncommitted delta — an entity being drawn, a body being dragged | reverts it; committed work is untouched |
-| `Tool` | a feature card, Sketch waiting for its plane, an armed sketch tool, a constrain session | exits it; drawn entities survive |
+| `Tool` | a feature card, an armed sketch tool, a constrain session | exits it; drawn entities survive |
 | `Idle` | nothing transient | clears the selection, a Feature tree or Bodies row included; leaves a sketch session only if it is empty |
 
 `cad_escape_level()` is a `constexpr` free function over a POD of four booleans rather than a
@@ -149,66 +149,26 @@ explicit selection, the sketch ribbon's Cancel, which asks first, or `Ctrl+Z`. A
 *session* is deliberately not a `Tool` level; it is the environment the `Idle` level lives in,
 which makes the destructive path unrepresentable rather than merely unlikely.
 
-A body Move is the one `Gesture` that outlives the press: its gizmo stays up between drags until
-Confirm keeps the placement or `Esc` or Cancel puts the body back. Until then the selection is
-held — a click off the gizmo only steers the camera — and undo is refused, since the placement
-is not in the history. Anything that starts another edit (a feature card, a sketch, placing
-imported art or text, another body's Move, a rebuild) keeps the placement, as switching gizmos
-keeps a move in Prepare. The panel ends the Move in one place (`DesignPanel::end_body_move`), so
-the gizmo, the Move / Rotate card and the ✓/✗ cannot outlive one another.
-
 Right-click is read at button-up against one budget, 3 px of drift, applied to the whole press
 rather than to its end points: a press that wandered past the budget at any moment is
 navigation, even if it comes back to where it started, which is what stops a slow, careful
 orbit from ending in a menu. There is no time budget — a gesture that means something different
 when it is slow is exactly what the interaction charter rules out. The raycast uses the press
-position, not the release. The sketch tool sees a right press only once the release has shown it
-was a click: the press itself goes to the camera, which may pan or orbit with that button, and the
-canvas replays it to the tool on a stationary release. A tool that uses the click (to terminate a
-chain, say) keeps the menu closed. Past either budget the event is navigation, and navigation
-does not transition the state machine.
+position, not the release. An armed sketch tool that already consumed the right
+button (to terminate a chain, say) declines to also open a menu, through a read-and-clear flag.
+Past either budget the event is navigation, and navigation does not transition the state
+machine.
 
 Navigation itself is Prepare's: the camera reads the drag actions set in Preferences > Control
-for each button, and in the Touchpad camera style a move with Alt held orbits and one with Shift
-held pans, whatever tool is armed. The left button is shared with picking and drawing, so a tool
-handle or a press that draws takes it first, as a gizmo does in Prepare; a whole body is swept
-with a rectangle on plain left-drag only while no camera action is assigned to the left button,
-and with Shift+left-drag otherwise — Prepare's own rectangle selection.
+for each button. The left button is shared with picking, so a whole body is swept with a
+rectangle on plain left-drag only while no camera action is assigned to it, and with
+Shift+left-drag otherwise — Prepare's own rectangle selection.
 
-Entering a sketch changes two things at once so the mode is legible: a banner above the
+Entering a sketch changes three things at once so the mode is legible: a banner above the
 canvas (a sibling of the canvas, not a child over it — on GTK a child window over a
-`wxGLCanvas` is a native window and does not reliably stack over GL), and `N` to look normal to
-the plane. The printer bed stays: there is no sketch grid, so the plate grid is the only ground
-reference a sketch has. Code that changes either belongs with a change to this section.
-
-Sketch mode is never entered without a plane under it, so the banner, the sketch keys and the
-sketch offer always have a session to act on. Sketch on a picked flat face or reference plane opens
-the session on it at once. With nothing picked it stays in Feature mode and waits for one — an
-armed `Tool`, left with `Esc` or ✗, and ended by anything that starts another edit — and the
-reference plane or flat face clicked next opens the session. A picked plane is a selection like a
-face: the sketch on it uses it up, and `Esc` or a click on nothing lets go of it, so a plane that
-can no longer be seen never decides where the next sketch goes.
-
-The reference planes — XY, XZ and YZ through the modeling origin, with their half-axes — are
-drawn on demand, because three translucent squares over every model are noise once they are not
-the thing being picked. Sketch brings them up while it waits for a plane, which is exactly when
-they are picked, and the session the pick opens takes them away; a live session draws none. The
-Feature tree's Origin row keeps them up outside a sketch. Its state is a view preference in
-AppConfig rather than part of the recipe, so it costs the project format nothing. The Plane tool
-keeps its own rule: the planes and the datums as Offset bases, and nothing for the other methods,
-where a click on a plane would rewrite the datum's references. The `P` and `A` keys are a
-separate, unpickable view helper and do not follow the Origin row.
-
-The Bed row, under the Origin row, is the printer bed's switch in the same way: it draws or hides
-the bed and its plate grid in every mode. It is a view preference in AppConfig too, and the bed is
-shown until it is turned off.
-
-The two rows are view switches, not history, and the tree says so: they sit unframed on the Feature
-tree's card, above the features' own framed list, and stay put while the features scroll. A click
-never selects either row, since a selected Origin or Bed would have nothing to edit, move or
-delete; the eye and the right-click menu are the only targets, and a row's label dims while its
-thing is hidden, as a hidden body's does. Because the block never takes the focus, `Ctrl+Shift+O`
-and `Ctrl+Shift+B` flip the Origin and the Bed from the keyboard.
+`wxGLCanvas` is a native window and does not reliably stack over GL), the printer bed muted so
+a plate grid is never read as a sketch grid, and `N` to look normal to the plane. Code that
+changes any of the three belongs with a change to this section.
 
 ## Rendering the bodies
 
@@ -229,15 +189,6 @@ degenerate edges are left out (`GeometryEngine::display_edges`), and the polylin
 once per shape, keyed by its `TShape`, because a recompute that leaves a body unchanged is the
 common case.
 
-While a feature card is open, its preview ghost is the whole model the candidate would produce,
-drawn translucent over the bodies, so every face the feature leaves alone is in both at the same
-depth. The ghost is drawn with a depth bias that pushes it back (`GLVolume::depth_bias`), so on a shared face
-the body always wins instead of the two copies z-fighting, and the ghost shows only where the
-result reaches past the bodies. Material a feature removes lies inside the old solid and would not
-show at all, so the tools whose result mostly coincides with the body — Fillet/Chamfer, Draft,
-Hole and the Mate hover — hide the bodies once the preview is valid and draw the result alone,
-opaque.
-
 ## Showing what is selected
 
 A selection is drawn on the faces it names, never as a tint over the body: a translucent
@@ -263,17 +214,7 @@ replay costs up to a recompute, so the panel finds the faces once per row and to
 generation, off the UI thread, and only while no feature card is open. One selection is live at
 a time: a viewport pick clears the feature row and a feature row clears the viewport pick, as the
 Feature tree and Bodies list do between themselves. `Esc`, a click on empty space and an
-empty rubber band all let go of it, whichever list or pick made it — except while a body Move is
-open, which holds the selection until it ends (see the interaction contract).
-
-Zoom to selection, on a Feature tree or Bodies row and in its right-click menu, frames one thing
-along the current view direction, as the canvas's Fit button frames the selection. On a body it
-frames the body whole, hidden or not, from its display mesh: the viewport never selects a hidden
-body, so the selection cannot stand in for it. On a sketch it frames the sketch's own geometry,
-drawn, consumed or suppressed; on any other feature, the faces the feature made, found as the row
-highlight finds them and from the same cache. From the offer it frames whatever the selection is,
-a body again included. A feature that is not a sketch and makes no faces, such as a datum plane
-or a suppressed Extrude, has no Zoom to selection.
+empty rubber band all let go of it, whichever list or pick made it.
 
 ## Following the app
 
@@ -290,21 +231,9 @@ The tab is a page of Orca's main window and answers to the same settings as Prep
 - **Sidebar icons.** Every clickable icon in the sidebar shows a hover chip. The card-header and
   constraint-row buttons are Orca's self-painted `Button`, because a native button cannot take a
   hover background on macOS. The Feature tree and Bodies lists are a custom-drawn
-  `DesignRowList` rather than a `wxTreeCtrl`, so each row carries its own actions — Zoom to
-  selection, Edit, Show/hide and Delete on a feature, Zoom to selection, Move, Show/hide and
-  Delete on a body, and only Show/hide on the Origin and Bed rows, a separate non-selectable list
-  above the features — and the eye shows whether that row is hidden. A feature with nothing to
-  frame keeps a blank cell where Zoom to selection would be, so every icon stays in its column.
-- **Plates.** This is the one thing the tab does not follow. The canvas has a bed of its own at
-  the printer bed's home position, whichever plate Prepare has current, and a new document's
-  modeling origin is that bed's centre. A bed that followed the current plate would slide out
-  from under a design: the origin is fixed once per document, baked into every sketch plane and
-  saved in the recipe, while the current plate can change between visits. Commit to Plate does
-  not need it either, since the committed object is placed on an empty spot of the current
-  plate. What the canvas does read from the plate is moved onto its bed: the exclude areas, the
-  plate box the camera orbits about when nothing is picked (`GLCanvas3D::_current_plate_box`),
-  and the first view, which starts from Prepare's camera turned to the tab's iso view: the CAD
-  isometric from the front-right corner that Home returns to, not Prepare's front-left one.
+  `DesignRowList` rather than a `wxTreeCtrl`, so each row carries its own actions — Edit,
+  Show/hide and Delete on a feature, Move, Show/hide and Delete on a body — and the eye shows
+  whether that row is hidden.
 - **Viewport text.** The status line and the active tool's values are drawn by the canvas in
   its ImGui pass, so they go with the canvas: a top-level window over GL does not follow its
   frame and was left floating over other applications.
@@ -327,12 +256,12 @@ permanent row index, verbs that do not apply shown disabled **in place with thei
 rather than removed. The invariant is that a verb's row index is identical in every selection
 where it appears and that adding a verb never moves an existing one — the hand learns the
 position, so the menu is never re-sorted, compacted or adaptively ordered. Above the families
-sits one *flat* row, holding Rename, Color and Zoom to selection — what a selection is opened for
-most: its verbs are items of their own at the top of the menu rather than a family's submenu. It
-is appended after the eight, so it moved no existing index, and it reads the same from the
-viewport and from a row of the Bodies list.
+sits one *flat* row, holding Rename and Color — what a selection is opened for most: its verbs are
+items of their own at the top of the menu rather than a family's submenu. It is appended after
+the eight, so it moved no existing index, and it reads the same from the viewport and from a row
+of the Bodies list.
 
-An invariant across 93 verbs and 20 selection kinds does not survive by review, so the map
+An invariant across 92 verbs and 20 selection kinds does not survive by review, so the map
 exists once, as data: `scripts/CAD/tool_atlas.json` carries every verb with its row, key, icon,
 accepted selections, preconditions and refusal string, and `scripts/CAD/gen_offer_table.py`
 emits `src/slic3r/GUI/CAD/DesignOffer.hpp` from it. The header is checked in and never

docs/HLSD/prusa-indx-profiles.md

@@ -36,13 +36,8 @@ override is not available in these profiles. The source's `EXCLUDE_E_START` and
 `EXCLUDE_E_END` internal markers become comments rather than printer commands.
 
 Pressure-advance restoration and automatic pressure-advance emission use the
-selected filament preset's settings. The INDX filament presets include
-`fdm_filament_template_indx`, whose start G-code sets the filament's pressure
-advance with `M572` and then starts the firmware's automatic calibration with
-`M573 R`, the commands PrusaSlicer emits after a tool change; the station purge
-disables pressure advance before it. The template also carries Prusa's
-multi-tool ramming and a 10 mm³ minimal purge. These profiles do not impose
-machine-owned filament overrides. Dock-fan control retains the source's material and layer
+selected filament preset's settings. These profiles do not impose machine-owned
+filament overrides. Dock-fan control retains the source's material and layer
 conditions; shutdown parks the tool and turns off the used heaters and dock fan.
 
 ## Configuration boundaries

localization/i18n/OrcaSlicer.pot

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-10-06 15:16-0300\n"
+"POT-Creation-Date: 2026-10-05 10:49-0300\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -3168,7 +3168,7 @@ msgstr ""
 msgid "Remove parameter"
 msgstr ""
 
-msgid "Range"
+msgid "to"
 msgstr ""
 
 msgid "Add height range"
@@ -5064,6 +5064,9 @@ msgstr ""
 msgid "layers"
 msgstr ""
 
+msgid "Range"
+msgstr ""
+
 msgid "Empty string"
 msgstr ""
 
@@ -9461,6 +9464,14 @@ msgstr ""
 msgid "Show incompatible/unsupported presets in the printer and filament dropdown lists. These presets cannot be selected."
 msgstr ""
 
+msgid "(Experimental) Use printer agents instead of print hosts"
+msgstr ""
+
+msgid ""
+"Route print jobs for non-Bambu printers through printer plug-in agents instead of the classic print-host upload flow.\n"
+"When disabled, OrcaSlicer uses the legacy print-host behavior."
+msgstr ""
+
 msgid "Experimental Features"
 msgstr ""
 
@@ -9472,14 +9483,6 @@ msgid ""
 "Highly experimental! Slow and may create artifact."
 msgstr ""
 
-msgid "Use printer agents instead of print hosts"
-msgstr ""
-
-msgid ""
-"Route print jobs for non-Bambu printers through printer plug-in agents instead of the classic print-host upload flow.\n"
-"When disabled, OrcaSlicer uses the legacy print-host behavior."
-msgstr ""
-
 msgid "Allow Abnormal Storage"
 msgstr ""
 
@@ -9642,9 +9645,6 @@ msgstr ""
 msgid "Please input layer value (>= 2)."
 msgstr ""
 
-msgid "to"
-msgstr ""
-
 msgid "Plate name"
 msgstr ""
 
@@ -14779,12 +14779,6 @@ msgstr ""
 msgid "If the model has two parts that are symmetric about the Y axis, and you want these parts to have symmetric textures, please click this option on one of the parts."
 msgstr ""
 
-msgid "Fill pattern tops"
-msgstr ""
-
-msgid "Choose this option if you want to completely fill in the tops of the infill pattern"
-msgstr ""
-
 msgid "Infill combination - Max layer height"
 msgstr ""
 
@@ -20427,21 +20421,6 @@ msgstr ""
 msgid "The filament model is unknown. A random filament preset will be used."
 msgstr ""
 
-msgid "Hide reference planes and axes"
-msgstr ""
-
-msgid "Show reference planes and axes"
-msgstr ""
-
-msgid "Hide the printer bed and its plate grid"
-msgstr ""
-
-msgid "Show the printer bed and its plate grid"
-msgstr ""
-
-msgid "Click a reference plane or a flat face to sketch on it — Esc cancels"
-msgstr ""
-
 msgid "Construction"
 msgstr ""
 
@@ -20527,10 +20506,26 @@ msgstr ""
 msgid "Bed hidden"
 msgstr ""
 
-msgid "Reference planes shown"
+msgid "FEATURES"
 msgstr ""
 
-msgid "Reference planes hidden"
+msgid "Sketch"
+msgstr ""
+
+#, possible-c-format, possible-boost-format
+msgid "Sketch plane: %s — pick a tool"
+msgstr ""
+
+msgid "Click a face or a reference plane in the viewport, then a sketch tool"
+msgstr ""
+
+#, possible-c-format, possible-boost-format
+msgid ""
+"Sketch plane: %s.\n"
+"Pick a tool, or press Menu for the list."
+msgstr ""
+
+msgid "Click a face or a reference plane, then a sketch tool."
 msgstr ""
 
 msgid "Add material (extrude / revolve / sweep / loft / thicken / rib)"
@@ -20798,6 +20793,12 @@ msgstr ""
 msgid "Pick a cylindrical surface (bore / outer) or a circular edge for a thread"
 msgstr ""
 
+msgid "Import STEP (editable B-rep solid)"
+msgstr ""
+
+msgid "Import mesh (STL/OBJ) as an editable B-rep solid"
+msgstr ""
+
 msgid "Constrain selected sketch"
 msgstr ""
 
@@ -21110,16 +21111,10 @@ msgstr ""
 msgid "New Design — clear the feature tree"
 msgstr ""
 
-msgid "Import STEP (editable B-rep solid)"
-msgstr ""
-
-msgid "Import mesh (STL/OBJ) as an editable B-rep solid"
-msgstr ""
-
 msgid "Export STEP…"
 msgstr ""
 
-msgid "Create a new sketch"
+msgid "Show the printer bed and its plate grid"
 msgstr ""
 
 msgid "Place on Face (F) — lay the picked face on the bed"
@@ -21152,9 +21147,6 @@ msgstr ""
 msgid "Height / Y"
 msgstr ""
 
-msgid "Sketch"
-msgstr ""
-
 msgid "Distance X"
 msgstr ""
 
@@ -21633,9 +21625,6 @@ msgstr ""
 msgid "Value"
 msgstr ""
 
-msgid "Pick a tool, or press Menu for the list."
-msgstr ""
-
 msgid "Constraints"
 msgstr ""
 
@@ -21665,9 +21654,6 @@ msgstr ""
 msgid "Show / hide"
 msgstr ""
 
-msgid "Zoom to selection"
-msgstr ""
-
 msgid "Check interference — find overlapping bodies"
 msgstr ""
 
@@ -21725,9 +21711,6 @@ msgstr ""
 msgid "Sketch selected — right-click to Extrude, or double-click to edit"
 msgstr ""
 
-msgid "That face is not flat — click a flat face or a reference plane"
-msgstr ""
-
 #, possible-c-format, possible-boost-format
 msgid "Body %d: vertex selected — click again for the whole body"
 msgstr ""
@@ -21770,6 +21753,10 @@ msgstr ""
 msgid "Edge %d selected — Shift+click to add edges, or click again for the whole body"
 msgstr ""
 
+#, possible-c-format, possible-boost-format
+msgid "%s plane selected — right-click for the drawing tools"
+msgstr ""
+
 #, possible-c-format, possible-boost-format
 msgid "%s plane selected — right-click to sketch on it, or click an object to select it"
 msgstr ""
@@ -21824,7 +21811,7 @@ msgstr ""
 msgid "Text unchanged"
 msgstr ""
 
-msgid "Text canceled"
+msgid "Text cancelled"
 msgstr ""
 
 msgid "Import SVG"
@@ -22444,7 +22431,7 @@ msgstr ""
 
 msgid ""
 "Nothing yet — import a STEP or a mesh from the toolbar,\n"
-"or press Sketch and click a reference plane to start a sketch."
+"or click a reference plane and right-click it to start a sketch."
 msgstr ""
 
 msgid "No solid yet — select a sketch and right-click it to Extrude."
@@ -22476,25 +22463,12 @@ msgstr ""
 msgid "Finding the feature's faces…"
 msgstr ""
 
-msgid "The model is being rebuilt — zoom again when it finishes"
-msgstr ""
-
-#, possible-c-format, possible-boost-format
-msgid "%s has nothing on show to zoom to"
+msgid "Select a body first — click it in the viewport or the Bodies list"
 msgstr ""
 
 msgid "That body has no display mesh yet — recompute first"
 msgstr ""
 
-msgid "Select something to zoom to"
-msgstr ""
-
-msgid "Finish or cancel what is open first"
-msgstr ""
-
-msgid "Select a body first — click it in the viewport or the Bodies list"
-msgstr ""
-
 msgid "Drag the arrows to move, the rings to rotate — then Confirm (Esc cancels)"
 msgstr ""
 
@@ -22514,6 +22488,9 @@ msgstr ""
 msgid "Placed on face — body laid flat on the bed"
 msgstr ""
 
+msgid "Finish or cancel what is open first"
+msgstr ""
+
 #, possible-c-format, possible-boost-format
 msgid "Edit rejected: %s"
 msgstr ""
@@ -22862,16 +22839,6 @@ msgstr ""
 msgid "Line E%d"
 msgstr ""
 
-#, possible-c-format, possible-boost-format
-msgid "Sketch plane: %s — pick a tool"
-msgstr ""
-
-#, possible-c-format, possible-boost-format
-msgid ""
-"Sketch plane: %s.\n"
-"Pick a tool, or press Menu for the list."
-msgstr ""
-
 msgid "Plane ready"
 msgstr ""
 
@@ -23088,10 +23055,7 @@ msgctxt "Design"
 msgid "Sketch"
 msgstr ""
 
-msgid "Select a flat face or a reference plane to sketch on"
-msgstr ""
-
-msgid "Sketch on the selected flat face or plane, or click one next"
+msgid "Click a face or a reference plane, then pick a drawing tool"
 msgstr ""
 
 msgctxt "Design"
@@ -23161,6 +23125,9 @@ msgctxt "Design"
 msgid "Hole"
 msgstr ""
 
+msgid "Drill a hole, centerd on a picked face or placed on a plane"
+msgstr ""
+
 msgctxt "Design"
 msgid "Thread"
 msgstr ""
@@ -23323,13 +23290,6 @@ msgstr ""
 msgid "Set the selected body's display color"
 msgstr ""
 
-msgctxt "Design"
-msgid "Zoom to selection"
-msgstr ""
-
-msgid "Frame the selection in the view, keeping the view direction"
-msgstr ""
-
 msgctxt "Design"
 msgid "Delete"
 msgstr ""

localization/i18n/en/OrcaSlicer_en.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-10-06 15:16-0300\n"
+"POT-Creation-Date: 2026-10-05 10:49-0300\n"
 "PO-Revision-Date: 2026-06-17 15:44-0300\n"
 "Last-Translator: Alexandre Folle de Menezes\n"
 "Language-Team: \n"
@@ -3164,7 +3164,7 @@ msgstr ""
 msgid "Remove parameter"
 msgstr ""
 
-msgid "Range"
+msgid "to"
 msgstr ""
 
 msgid "Add height range"
@@ -5060,6 +5060,9 @@ msgstr ""
 msgid "layers"
 msgstr ""
 
+msgid "Range"
+msgstr ""
+
 msgid "Empty string"
 msgstr ""
 
@@ -9457,6 +9460,14 @@ msgstr ""
 msgid "Show incompatible/unsupported presets in the printer and filament dropdown lists. These presets cannot be selected."
 msgstr ""
 
+msgid "(Experimental) Use printer agents instead of print hosts"
+msgstr ""
+
+msgid ""
+"Route print jobs for non-Bambu printers through printer plug-in agents instead of the classic print-host upload flow.\n"
+"When disabled, OrcaSlicer uses the legacy print-host behavior."
+msgstr ""
+
 msgid "Experimental Features"
 msgstr ""
 
@@ -9468,14 +9479,6 @@ msgid ""
 "Highly experimental! Slow and may create artifact."
 msgstr ""
 
-msgid "Use printer agents instead of print hosts"
-msgstr ""
-
-msgid ""
-"Route print jobs for non-Bambu printers through printer plug-in agents instead of the classic print-host upload flow.\n"
-"When disabled, OrcaSlicer uses the legacy print-host behavior."
-msgstr ""
-
 msgid "Allow Abnormal Storage"
 msgstr ""
 
@@ -9638,9 +9641,6 @@ msgstr ""
 msgid "Please input layer value (>= 2)."
 msgstr ""
 
-msgid "to"
-msgstr ""
-
 msgid "Plate name"
 msgstr ""
 
@@ -14775,12 +14775,6 @@ msgstr ""
 msgid "If the model has two parts that are symmetric about the Y axis, and you want these parts to have symmetric textures, please click this option on one of the parts."
 msgstr ""
 
-msgid "Fill pattern tops"
-msgstr ""
-
-msgid "Choose this option if you want to completely fill in the tops of the infill pattern"
-msgstr ""
-
 msgid "Infill combination - Max layer height"
 msgstr ""
 
@@ -20423,21 +20417,6 @@ msgstr ""
 msgid "The filament model is unknown. A random filament preset will be used."
 msgstr ""
 
-msgid "Hide reference planes and axes"
-msgstr ""
-
-msgid "Show reference planes and axes"
-msgstr ""
-
-msgid "Hide the printer bed and its plate grid"
-msgstr ""
-
-msgid "Show the printer bed and its plate grid"
-msgstr ""
-
-msgid "Click a reference plane or a flat face to sketch on it — Esc cancels"
-msgstr ""
-
 msgid "Construction"
 msgstr ""
 
@@ -20523,10 +20502,26 @@ msgstr ""
 msgid "Bed hidden"
 msgstr ""
 
-msgid "Reference planes shown"
+msgid "FEATURES"
 msgstr ""
 
-msgid "Reference planes hidden"
+msgid "Sketch"
+msgstr ""
+
+#, c-format, boost-format
+msgid "Sketch plane: %s — pick a tool"
+msgstr ""
+
+msgid "Click a face or a reference plane in the viewport, then a sketch tool"
+msgstr ""
+
+#, c-format, boost-format
+msgid ""
+"Sketch plane: %s.\n"
+"Pick a tool, or press Menu for the list."
+msgstr ""
+
+msgid "Click a face or a reference plane, then a sketch tool."
 msgstr ""
 
 msgid "Add material (extrude / revolve / sweep / loft / thicken / rib)"
@@ -20794,6 +20789,12 @@ msgstr ""
 msgid "Pick a cylindrical surface (bore / outer) or a circular edge for a thread"
 msgstr ""
 
+msgid "Import STEP (editable B-rep solid)"
+msgstr ""
+
+msgid "Import mesh (STL/OBJ) as an editable B-rep solid"
+msgstr ""
+
 msgid "Constrain selected sketch"
 msgstr ""
 
@@ -21106,16 +21107,10 @@ msgstr ""
 msgid "New Design — clear the feature tree"
 msgstr ""
 
-msgid "Import STEP (editable B-rep solid)"
-msgstr ""
-
-msgid "Import mesh (STL/OBJ) as an editable B-rep solid"
-msgstr ""
-
 msgid "Export STEP…"
 msgstr ""
 
-msgid "Create a new sketch"
+msgid "Show the printer bed and its plate grid"
 msgstr ""
 
 msgid "Place on Face (F) — lay the picked face on the bed"
@@ -21148,9 +21143,6 @@ msgstr ""
 msgid "Height / Y"
 msgstr ""
 
-msgid "Sketch"
-msgstr ""
-
 msgid "Distance X"
 msgstr ""
 
@@ -21629,9 +21621,6 @@ msgstr ""
 msgid "Value"
 msgstr ""
 
-msgid "Pick a tool, or press Menu for the list."
-msgstr ""
-
 msgid "Constraints"
 msgstr ""
 
@@ -21661,9 +21650,6 @@ msgstr ""
 msgid "Show / hide"
 msgstr ""
 
-msgid "Zoom to selection"
-msgstr ""
-
 msgid "Check interference — find overlapping bodies"
 msgstr ""
 
@@ -21721,9 +21707,6 @@ msgstr ""
 msgid "Sketch selected — right-click to Extrude, or double-click to edit"
 msgstr ""
 
-msgid "That face is not flat — click a flat face or a reference plane"
-msgstr ""
-
 #, c-format, boost-format
 msgid "Body %d: vertex selected — click again for the whole body"
 msgstr ""
@@ -21766,6 +21749,10 @@ msgstr ""
 msgid "Edge %d selected — Shift+click to add edges, or click again for the whole body"
 msgstr ""
 
+#, c-format, boost-format
+msgid "%s plane selected — right-click for the drawing tools"
+msgstr ""
+
 #, c-format, boost-format
 msgid "%s plane selected — right-click to sketch on it, or click an object to select it"
 msgstr ""
@@ -21820,7 +21807,7 @@ msgstr ""
 msgid "Text unchanged"
 msgstr ""
 
-msgid "Text canceled"
+msgid "Text cancelled"
 msgstr ""
 
 msgid "Import SVG"
@@ -22440,7 +22427,7 @@ msgstr ""
 
 msgid ""
 "Nothing yet — import a STEP or a mesh from the toolbar,\n"
-"or press Sketch and click a reference plane to start a sketch."
+"or click a reference plane and right-click it to start a sketch."
 msgstr ""
 
 msgid "No solid yet — select a sketch and right-click it to Extrude."
@@ -22472,25 +22459,12 @@ msgstr ""
 msgid "Finding the feature's faces…"
 msgstr ""
 
-msgid "The model is being rebuilt — zoom again when it finishes"
-msgstr ""
-
-#, c-format, boost-format
-msgid "%s has nothing on show to zoom to"
+msgid "Select a body first — click it in the viewport or the Bodies list"
 msgstr ""
 
 msgid "That body has no display mesh yet — recompute first"
 msgstr ""
 
-msgid "Select something to zoom to"
-msgstr ""
-
-msgid "Finish or cancel what is open first"
-msgstr ""
-
-msgid "Select a body first — click it in the viewport or the Bodies list"
-msgstr ""
-
 msgid "Drag the arrows to move, the rings to rotate — then Confirm (Esc cancels)"
 msgstr ""
 
@@ -22510,6 +22484,9 @@ msgstr ""
 msgid "Placed on face — body laid flat on the bed"
 msgstr ""
 
+msgid "Finish or cancel what is open first"
+msgstr ""
+
 #, c-format, boost-format
 msgid "Edit rejected: %s"
 msgstr ""
@@ -22858,16 +22835,6 @@ msgstr ""
 msgid "Line E%d"
 msgstr ""
 
-#, c-format, boost-format
-msgid "Sketch plane: %s — pick a tool"
-msgstr ""
-
-#, c-format, boost-format
-msgid ""
-"Sketch plane: %s.\n"
-"Pick a tool, or press Menu for the list."
-msgstr ""
-
 msgid "Plane ready"
 msgstr ""
 
@@ -23084,10 +23051,7 @@ msgctxt "Design"
 msgid "Sketch"
 msgstr ""
 
-msgid "Select a flat face or a reference plane to sketch on"
-msgstr ""
-
-msgid "Sketch on the selected flat face or plane, or click one next"
+msgid "Click a face or a reference plane, then pick a drawing tool"
 msgstr ""
 
 msgctxt "Design"
@@ -23157,6 +23121,9 @@ msgctxt "Design"
 msgid "Hole"
 msgstr ""
 
+msgid "Drill a hole, centerd on a picked face or placed on a plane"
+msgstr ""
+
 msgctxt "Design"
 msgid "Thread"
 msgstr ""
@@ -23319,13 +23286,6 @@ msgstr ""
 msgid "Set the selected body's display color"
 msgstr ""
 
-msgctxt "Design"
-msgid "Zoom to selection"
-msgstr ""
-
-msgid "Frame the selection in the view, keeping the view direction"
-msgstr ""
-
 msgctxt "Design"
 msgid "Delete"
 msgstr ""

resources/calib/temperature_tower/gen_belt_temp_tower.py

@@ -1,79 +0,0 @@
-#!/usr/bin/env python3
-"""Belt temperature-tower asset generator (discrete-provini design).
-
-A vertical temperature tower cannot be sliced on a belt printer, so lay a row of
-DISCRETE provini (one per temperature) along the belt (designed Y) with a fixed
-surface gap. Each provino is the chevron+arc unit (belt_temp_provino_unit.stl,
-keel-first); its temperature is ENGRAVED upright into the 50 mm face — a raised
-number would be an unsupported overhang on the belt. The C++ calib_temp belt branch
-(Plater.cpp) injects one M104 per zone 70 layers INTO provino i:
-  print_z[i] = i * PITCH * cos(theta) + 70 * layer_height   (theta = 45)
-inside the body, not in the empty inter-provino gap (which has no sliced layers for
-the event to attach to). PITCH below is the shared geometry contract with that code —
-keep them in sync.
-
-Generates one STL per filament temp range used by Temp_Calibration_Dlg.
-"""
-import numpy as np, trimesh, os
-from matplotlib.textpath import TextPath
-from matplotlib.font_manager import FontProperties
-from shapely.geometry import Polygon as ShPoly
-from shapely.ops import unary_union
-
-HERE = os.path.dirname(os.path.abspath(__file__))
-UNIT = os.path.join(HERE, 'belt_temp_provino_unit.stl')   # single provino, keel-first
-SURF_GAP = 25.0            # surface-to-surface gap between provini (mm) — user spec
-TEXT_H = 9.0
-TEXT_DEPTH = 0.8           # engraving depth (numbers are CUT into the face, not raised:
-                          # a raised number is an unsupported Y-overhang on the belt)
-TEXT_OVERSHOOT = 0.6       # extra height poking out of the face for a clean boolean cut
-
-# Temperature ranges (start, end) per filament family, 5 C step. File name encodes them.
-RANGES = [(230,190),(270,230),(250,230),(280,240),(240,210),(320,280)]
-
-unit = trimesh.load(UNIT)
-dY = unit.bounds[1,1] - unit.bounds[0,1]
-PITCH = dY + SURF_GAP                       # designed-Y pitch == C++ contract constant
-print(f"unit dY={dY:.2f}  PITCH={PITCH:.3f}  (C++ contract: print_z[i]=i*{PITCH:.3f}*cos45)")
-
-# 50 mm face normal (0,-1,1)/sqrt2 ; UPRIGHT basis u=+X det(+1) (verified non-mirrored)
-n = np.array([0,-1,1.])/np.sqrt(2)
-u = np.array([1,0,0.]); v = np.array([0,1,1.])/np.sqrt(2)
-R = np.column_stack([u,v,n])
-fn = unit.face_normals; fc = unit.triangles_center; fa = unit.area_faces
-sel = (fn@n) > 0.9
-face_c = (fc[sel]*fa[sel,None]).sum(0)/fa[sel].sum()
-
-def text_mesh(s):
-    tp = TextPath((0,0), s, size=TEXT_H, prop=FontProperties(family='DejaVu Sans'))
-    rings = [ShPoly(p) for p in tp.to_polygons() if len(p)>=3]
-    rings.sort(key=lambda r:r.area, reverse=True)
-    used=[False]*len(rings); parts=[]
-    for i,o in enumerate(rings):
-        if used[i]: continue
-        holes=[]
-        for j in range(i+1,len(rings)):
-            if not used[j] and o.contains(rings[j]): holes.append(rings[j].exterior.coords); used[j]=True
-        parts.append(ShPoly(o.exterior.coords,holes)); used[i]=True
-    poly = unary_union(parts)
-    geoms = list(poly.geoms) if poly.geom_type=='MultiPolygon' else [poly]
-    m = trimesh.util.concatenate([trimesh.creation.extrude_polygon(g,height=TEXT_DEPTH+TEXT_OVERSHOOT) for g in geoms])
-    c = m.bounds.mean(axis=0); m.apply_translation([-c[0],-c[1],0]); return m
-
-for t_start, t_end in RANGES:
-    temps = list(range(t_start, t_end-1, -5))
-    parts=[]
-    for i,T in enumerate(temps):
-        c = unit.copy(); c.apply_translation([0, i*PITCH, 0])
-        t = text_mesh(str(T)); M=np.eye(4); M[:3,:3]=R; t.apply_transform(M)
-        # place the text spanning from TEXT_DEPTH inside the face to TEXT_OVERSHOOT outside,
-        # then CUT it out of the provino (engrave) — no raised material, no Y-overhang.
-        t.apply_translation(face_c - n*TEXT_DEPTH + np.array([0,i*PITCH,0]))
-        c = trimesh.boolean.difference([c, t], engine='manifold')
-        parts.append(c)
-    asset = trimesh.util.concatenate(parts)
-    out = os.path.join(HERE, f"belt_temp_tower_{t_start}_{t_end}.stl")
-    asset.export(out)
-    dims = np.round(asset.bounds[1]-asset.bounds[0],1)
-    wt = all(p.is_watertight for p in parts)
-    print(f"  {t_start}->{t_end}: {len(temps)} zones  bbox={dims}  watertight={wt}  -> {os.path.basename(out)}")

resources/images/design_bed.svg

@@ -1 +0,0 @@
-<svg xmlns="http://www.w3.org/2000/svg" width="24" height="24" viewBox="0 0 24 24" fill="none" stroke="#949494" stroke-width="0.85" stroke-linecap="round" stroke-linejoin="round"><path d="M2 9 14 9 22 15 10 15Z"/><path d="M2 9V11L10 17H22V15M10 15V17"/><path d="M6 9 14 15M10 9 18 15M6 12H18"/></svg>

resources/images/design_export.svg

@@ -1 +0,0 @@
-<svg xmlns="http://www.w3.org/2000/svg" width="24" height="24" viewBox="0 0 24 24" fill="none" stroke="#949494" stroke-width="0.85" stroke-linecap="round" stroke-linejoin="round"><path d="M3.15 19.57V4.43A1.28 1.28 0 0 1 4.43 3.15H17.05L20.85 6.95V19.57A1.28 1.28 0 0 1 19.57 20.85H4.43A1.28 1.28 0 0 1 3.15 19.57ZM8.2 3.15V5.68A1.28 1.28 0 0 0 9.48 6.95H14.52A1.28 1.28 0 0 0 15.8 5.68V3.15M17.05 20.85V15.8A1.28 1.28 0 0 0 15.8 14.53H8.2A1.28 1.28 0 0 0 6.95 15.8V20.85"/></svg>

resources/images/design_import_mesh.svg

@@ -1 +0,0 @@
-<svg xmlns="http://www.w3.org/2000/svg" width="24" height="24" viewBox="0 0 24 24"><path d="M8.08,10.74 8.08,5.4M8.08,10.74 15.55,4.87M17.15,10.2 15.55,4.87M4.88,8.6 8.62,20.87M17.15,10.2 20.89,16.07M8.08,10.74 12.78,15.54 17.15,10.2M17.15,19.8 12.78,15.54 8.62,20.87M4.88,8.6 8.08,10.74 17.15,10.2 19.82,7M8.08,10.74 8.62,20.87M17.15,10.2 17.15,19.8" fill="none" stroke="#949494" stroke-width="0.6" stroke-linecap="round" stroke-linejoin="round"/><polygon points="4.88,8.6 8.08,5.4 15.55,4.87 19.82,7 20.89,16.07 17.15,19.8 8.62,20.87 4.35,17.14" fill="none" stroke="#949494" stroke-width="0.85" stroke-linejoin="round"/><polygon points="2.84,4.68 7.32,4.68 7.32,2.84 11.29,5.86 7.32,8.88 7.32,7.04 2.84,7.04" style="fill:#009688;stroke:#009688;stroke-width:0.4;stroke-linejoin:round"/></svg>

resources/images/design_new.svg

@@ -1 +0,0 @@
-<svg xmlns="http://www.w3.org/2000/svg" width="24" height="24" viewBox="0 0 24 24" fill="none" stroke="#949494" stroke-width="0.85" stroke-linecap="round" stroke-linejoin="round"><rect x="3.15" y="3.15" width="17.7" height="17.7" rx="1.28"/><path d="M7.6 12H16.4M12 7.6V16.4"/></svg>

resources/images/design_new_sketch.svg

@@ -1 +0,0 @@
-<svg xmlns="http://www.w3.org/2000/svg" width="24" height="24" viewBox="0 0 24 24" fill="none" stroke="#949494" stroke-width="0.85" stroke-linecap="round" stroke-linejoin="round"><path d="M5.88 3.88H17.16M3.88 5.88V17.16M19.16 5.88V12.38M5.88 19.16H12.38M9.85 7.85H13.2M7.85 9.85V13.2M14.92 9.85A7.35 7.35 0 0 1 9.85 14.92"/><path d="M2.83 2.83h2.1v2.1h-2.1zM18.11 2.83h2.1v2.1h-2.1zM2.83 18.11h2.1v2.1h-2.1zM6.8 6.8h2.1v2.1h-2.1zM14.15 6.8h2.1v2.1h-2.1zM6.8 14.15h2.1v2.1h-2.1z" fill="#949494" stroke="none"/><polygon points="16.01,13.19 18.3,13.19 18.3,16.01 21.12,16.01 21.12,18.3 18.3,18.3 18.3,21.12 16.01,21.12 16.01,18.3 13.19,18.3 13.19,16.01 16.01,16.01" style="fill:#009688;stroke:#009688;stroke-width:0.4;stroke-linejoin:round"/></svg>

resources/images/design_step.svg

@@ -1 +1 @@
-<svg xmlns="http://www.w3.org/2000/svg" width="24" height="24" viewBox="0 1.5 23 23"><path d="M3.0 9.0 L16.0 9.0 L16.0 21.0 L3.0 21.0 ZM3.0 9.0 L7.0 5.0 L20.0 5.0 L16.0 9.0M20.0 5.0 L20.0 17.0 L16.0 21.0" fill="none" stroke="#949494" stroke-width="0.85" stroke-linecap="round" stroke-linejoin="round"/><path d="M6.168410256410256 13.423897435897436V13.868410256410256Q5.908923076923077 13.744307692307691 5.678769230769231 13.683384615384615Q5.448615384615385 13.622461538461538 5.23425641025641 13.622461538461538Q4.861948717948718 13.622461538461538 4.66 13.766871794871793Q4.458051282051283 13.91128205128205 4.458051282051283 14.177538461538461Q4.458051282051283 14.400923076923076 4.592307692307693 14.514871794871794Q4.726564102564103 14.628820512820512 5.101128205128205 14.69876923076923L5.3764102564102565 14.755179487179486Q5.886358974358975 14.852205128205128 6.128923076923078 15.09702564102564Q6.37148717948718 15.341846153846152 6.37148717948718 15.75251282051282Q6.37148717948718 16.242153846153844 6.043179487179488 16.49487179487179Q5.7148717948717955 16.747589743589742 5.080820512820513 16.747589743589742Q4.841641025641026 16.747589743589742 4.572000000000001 16.693435897435897Q4.302358974358975 16.639282051282052 4.013538461538462 16.53323076923077V16.063897435897434Q4.291076923076924 16.219589743589744 4.557333333333334 16.2985641025641Q4.823589743589745 16.37753846153846 5.080820512820513 16.37753846153846Q5.471179487179487 16.37753846153846 5.683282051282052 16.224102564102562Q5.895384615384616 16.070666666666664 5.895384615384616 15.786358974358974Q5.895384615384616 15.538153846153845 5.743076923076924 15.398256410256408Q5.590769230769231 15.258358974358973 5.243282051282051 15.188410256410256L4.965743589743591 15.134256410256409Q4.455794871794872 15.032717948717949 4.227897435897436 14.816102564102565Q4.000000000000001 14.599487179487179 4.000000000000001 14.213641025641024Q4.000000000000001 13.766871794871793 4.314769230769231 13.509641025641024Q4.629538461538462 13.252410256410256 5.182358974358975 13.252410256410256Q5.419282051282051 13.252410256410256 5.665230769230769 13.29528205128205Q5.911179487179488 13.338153846153846 6.168410256410256 13.423897435897436ZM6.615179487179487 13.313333333333333H9.46502564102564V13.696923076923076H8.269128205128204V16.682153846153845H7.811076923076923V13.696923076923076H6.615179487179487ZM9.905025641025642 13.313333333333333H12.035076923076925V13.696923076923076H10.360820512820514V14.69425641025641H11.965128205128206V15.077846153846153H10.360820512820514V16.2985641025641H12.075692307692309V16.682153846153845H9.905025641025642ZM13.280615384615384 13.687897435897435V14.953743589743588H13.85374358974359Q14.171897435897435 14.953743589743588 14.345641025641026 14.78902564102564Q14.519384615384615 14.624307692307692 14.519384615384615 14.319692307692307Q14.519384615384615 14.017333333333333 14.345641025641026 13.852615384615383Q14.171897435897435 13.687897435897435 13.85374358974359 13.687897435897435ZM12.824820512820512 13.313333333333333H13.85374358974359Q14.420102564102564 13.313333333333333 14.710051282051282 13.569435897435897Q15.0 13.82553846153846 15.0 14.319692307692307Q15.0 14.818358974358974 14.710051282051282 15.073333333333332Q14.420102564102564 15.32830769230769 13.85374358974359 15.32830769230769H13.280615384615384V16.682153846153845H12.824820512820512Z" fill="#949494" stroke="none"/><polygon points="2.72,5.99 7.02,5.99 7.02,4.22 10.82,7.12 7.02,10.01 7.02,8.25 2.72,8.25" style="fill:#009688;stroke:#009688;stroke-width:0.38;stroke-linejoin:round"/></svg>
+<svg xmlns="http://www.w3.org/2000/svg" width="24" height="24" viewBox="0 0 24 24"><path d="M3.0 9.0 L16.0 9.0 L16.0 21.0 L3.0 21.0 ZM3.0 9.0 L7.0 5.0 L20.0 5.0 L16.0 9.0M20.0 5.0 L20.0 17.0 L16.0 21.0" fill="none" stroke="#949494" stroke-width="0.85" stroke-linecap="round" stroke-linejoin="round"/><path d="M6.168410256410256 13.423897435897436V13.868410256410256Q5.908923076923077 13.744307692307691 5.678769230769231 13.683384615384615Q5.448615384615385 13.622461538461538 5.23425641025641 13.622461538461538Q4.861948717948718 13.622461538461538 4.66 13.766871794871793Q4.458051282051283 13.91128205128205 4.458051282051283 14.177538461538461Q4.458051282051283 14.400923076923076 4.592307692307693 14.514871794871794Q4.726564102564103 14.628820512820512 5.101128205128205 14.69876923076923L5.3764102564102565 14.755179487179486Q5.886358974358975 14.852205128205128 6.128923076923078 15.09702564102564Q6.37148717948718 15.341846153846152 6.37148717948718 15.75251282051282Q6.37148717948718 16.242153846153844 6.043179487179488 16.49487179487179Q5.7148717948717955 16.747589743589742 5.080820512820513 16.747589743589742Q4.841641025641026 16.747589743589742 4.572000000000001 16.693435897435897Q4.302358974358975 16.639282051282052 4.013538461538462 16.53323076923077V16.063897435897434Q4.291076923076924 16.219589743589744 4.557333333333334 16.2985641025641Q4.823589743589745 16.37753846153846 5.080820512820513 16.37753846153846Q5.471179487179487 16.37753846153846 5.683282051282052 16.224102564102562Q5.895384615384616 16.070666666666664 5.895384615384616 15.786358974358974Q5.895384615384616 15.538153846153845 5.743076923076924 15.398256410256408Q5.590769230769231 15.258358974358973 5.243282051282051 15.188410256410256L4.965743589743591 15.134256410256409Q4.455794871794872 15.032717948717949 4.227897435897436 14.816102564102565Q4.000000000000001 14.599487179487179 4.000000000000001 14.213641025641024Q4.000000000000001 13.766871794871793 4.314769230769231 13.509641025641024Q4.629538461538462 13.252410256410256 5.182358974358975 13.252410256410256Q5.419282051282051 13.252410256410256 5.665230769230769 13.29528205128205Q5.911179487179488 13.338153846153846 6.168410256410256 13.423897435897436ZM6.615179487179487 13.313333333333333H9.46502564102564V13.696923076923076H8.269128205128204V16.682153846153845H7.811076923076923V13.696923076923076H6.615179487179487ZM9.905025641025642 13.313333333333333H12.035076923076925V13.696923076923076H10.360820512820514V14.69425641025641H11.965128205128206V15.077846153846153H10.360820512820514V16.2985641025641H12.075692307692309V16.682153846153845H9.905025641025642ZM13.280615384615384 13.687897435897435V14.953743589743588H13.85374358974359Q14.171897435897435 14.953743589743588 14.345641025641026 14.78902564102564Q14.519384615384615 14.624307692307692 14.519384615384615 14.319692307692307Q14.519384615384615 14.017333333333333 14.345641025641026 13.852615384615383Q14.171897435897435 13.687897435897435 13.85374358974359 13.687897435897435ZM12.824820512820512 13.313333333333333H13.85374358974359Q14.420102564102564 13.313333333333333 14.710051282051282 13.569435897435897Q15.0 13.82553846153846 15.0 14.319692307692307Q15.0 14.818358974358974 14.710051282051282 15.073333333333332Q14.420102564102564 15.32830769230769 13.85374358974359 15.32830769230769H13.280615384615384V16.682153846153845H12.824820512820512Z" fill="#949494" stroke="none"/></svg>

resources/images/design_zoom.svg

@@ -1 +0,0 @@
-<svg xmlns="http://www.w3.org/2000/svg" width="24" height="24" viewBox="0 0 24 24" fill="none" stroke="#949494" stroke-width="0.85" stroke-linecap="round" stroke-linejoin="round"><circle cx="10" cy="10" r="7"/><path d="M6 10a4 4 0 0 1 4-4M15 15 21.5 21.5"/></svg>

resources/profiles/Custom.json

@@ -1,13 +1,9 @@
 {
 	"name": "Custom Printer",
-	"version": "02.04.00.08",
+	"version": "02.04.00.07",
 	"force_update": "0",
 	"description": "My configurations",
 	"machine_model_list": [
-		{
-			"name": "Generic Belt Printer",
-			"sub_path": "machine/MyBeltPrinter.json"
-		},
 		{
 			"name": "Generic Klipper Printer",
 			"sub_path": "machine/MyKlipper.json"
@@ -54,10 +50,6 @@
 			"name": "0.08mm Extra Fine @MyKlipper",
 			"sub_path": "process/0.08mm Extra Fine @MyKlipper.json"
 		},
-		{
-			"name": "0.12mm Fine @MyBeltPrinter",
-			"sub_path": "process/0.12mm Fine @MyBeltPrinter.json"
-		},
 		{
 			"name": "0.12mm Fine @MyKlipper",
 			"sub_path": "process/0.12mm Fine @MyKlipper.json"
@@ -70,10 +62,6 @@
 			"name": "0.16mm Optimal @MyKlipper",
 			"sub_path": "process/0.16mm Optimal @MyKlipper.json"
 		},
-		{
-			"name": "0.20mm Standard @MyBeltPrinter",
-			"sub_path": "process/0.20mm Standard @MyBeltPrinter.json"
-		},
 		{
 			"name": "0.20mm Standard @MyKlipper",
 			"sub_path": "process/0.20mm Standard @MyKlipper.json"
@@ -274,10 +262,6 @@
 			"name": "MyKlipper 0.8 nozzle",
 			"sub_path": "machine/MyKlipper 0.8 nozzle.json"
 		},
-		{
-			"name": "fdm_belt_common",
-			"sub_path": "machine/fdm_belt_common.json"
-		},
 		{
 			"name": "fdm_toolchanger_common",
 			"sub_path": "machine/fdm_toolchanger_common.json"
@@ -290,22 +274,6 @@
 			"name": "MyRRF 0.4 nozzle",
 			"sub_path": "machine/MyRRF 0.4 nozzle.json"
 		},
-		{
-			"name": "MyBeltPrinter 0.2 nozzle",
-			"sub_path": "machine/MyBeltPrinter 0.2 nozzle.json"
-		},
-		{
-			"name": "MyBeltPrinter 0.4 nozzle",
-			"sub_path": "machine/MyBeltPrinter 0.4 nozzle.json"
-		},
-		{
-			"name": "MyBeltPrinter 0.6 nozzle",
-			"sub_path": "machine/MyBeltPrinter 0.6 nozzle.json"
-		},
-		{
-			"name": "MyBeltPrinter 0.8 nozzle",
-			"sub_path": "machine/MyBeltPrinter 0.8 nozzle.json"
-		},
 		{
 			"name": "MyToolChanger 0.2 nozzle",
 			"sub_path": "machine/MyToolChanger 0.2 nozzle.json"

resources/profiles/Custom/machine/MyBeltPrinter 0.2 nozzle.json

@@ -1,27 +0,0 @@
-{
-	"type": "machine",
-	"name": "MyBeltPrinter 0.2 nozzle",
-	"inherits": "fdm_belt_common",
-	"from": "system",
-	"setting_id": "3w1uyJdmm14QhDnH",
-	"instantiation": "true",
-	"printer_model": "Generic Belt Printer",
-	"default_print_profile": "0.12mm Fine @MyBeltPrinter",
-	"nozzle_diameter": [
-		"0.2"
-	],
-	"max_layer_height": [
-		"0.16"
-	],
-	"min_layer_height": [
-		"0.04"
-	],
-	"printer_variant": "0.2",
-	"printable_area": [
-		"0x0",
-		"350x0",
-		"350x350",
-		"0x350"
-	],
-	"printable_height": "300"
-}

resources/profiles/Custom/machine/MyBeltPrinter 0.4 nozzle.json

@@ -1,20 +0,0 @@
-{
-	"type": "machine",
-	"name": "MyBeltPrinter 0.4 nozzle",
-	"inherits": "fdm_belt_common",
-	"from": "system",
-	"setting_id": "6nRHUtvJOUffocbu",
-	"instantiation": "true",
-	"printer_model": "Generic Belt Printer",
-	"nozzle_diameter": [
-		"0.4"
-	],
-	"printer_variant": "0.4",
-	"printable_area": [
-		"0x0",
-		"350x0",
-		"350x350",
-		"0x350"
-	],
-	"printable_height": "300"
-}

resources/profiles/Custom/machine/MyBeltPrinter 0.6 nozzle.json

@@ -1,26 +0,0 @@
-{
-	"type": "machine",
-	"name": "MyBeltPrinter 0.6 nozzle",
-	"inherits": "fdm_belt_common",
-	"from": "system",
-	"setting_id": "K0m9HbUNwKT4UCJV",
-	"instantiation": "true",
-	"printer_model": "Generic Belt Printer",
-	"nozzle_diameter": [
-		"0.6"
-	],
-	"max_layer_height": [
-		"0.4"
-	],
-	"min_layer_height": [
-		"0.12"
-	],
-	"printer_variant": "0.6",
-	"printable_area": [
-		"0x0",
-		"350x0",
-		"350x350",
-		"0x350"
-	],
-	"printable_height": "300"
-}

resources/profiles/Custom/machine/MyBeltPrinter 0.8 nozzle.json

@@ -1,26 +0,0 @@
-{
-	"type": "machine",
-	"name": "MyBeltPrinter 0.8 nozzle",
-	"inherits": "fdm_belt_common",
-	"from": "system",
-	"setting_id": "rHAweDz4eNwttPNA",
-	"instantiation": "true",
-	"printer_model": "Generic Belt Printer",
-	"nozzle_diameter": [
-		"0.8"
-	],
-	"max_layer_height": [
-		"0.6"
-	],
-	"min_layer_height": [
-		"0.2"
-	],
-	"printer_variant": "0.8",
-	"printable_area": [
-		"0x0",
-		"350x0",
-		"350x350",
-		"0x350"
-	],
-	"printable_height": "300"
-}

resources/profiles/Custom/machine/MyBeltPrinter.json

@@ -1,12 +0,0 @@
-{
-	"type": "machine_model",
-	"name": "Generic Belt Printer",
-	"model_id": "my_belt_01",
-	"nozzle_diameter": "0.4;0.2;0.6;0.8",
-	"machine_tech": "FFF",
-	"family": "MyPrinter",
-	"bed_model": "Custom_350_bed.stl",
-	"bed_texture": "orcaslicer_bed_texture.svg",
-	"hotend_model": "",
-	"default_materials": "Generic PLA @System;Generic PLA-CF @System;Generic PETG @System;Generic TPU @System;Generic PC @System;Generic PVA @System;Generic PA @System;Generic PA-CF @System"
-}

resources/profiles/Custom/machine/fdm_belt_common.json

@@ -1,96 +0,0 @@
-{
-	"type": "machine",
-	"name": "fdm_belt_common",
-	"inherits": "fdm_klipper_common",
-	"from": "system",
-	"instantiation": "false",
-	"gcode_flavor": "klipper",
-	"single_extruder_multi_material": "0",
-	"default_filament_profile": [
-		"Generic PLA @System"
-	],
-	"default_print_profile": "0.20mm Standard @MyBeltPrinter",
-	"max_layer_height": [
-		"0.32"
-	],
-	"min_layer_height": [
-		"0.08"
-	],
-	"deretraction_speed": [
-		"30"
-	],
-	"extruder_colour": [
-		"#FCE94F"
-	],
-	"extruder_offset": [
-		"0x0"
-	],
-	"long_retractions_when_cut": [
-		"0"
-	],
-	"nozzle_diameter": [
-		"0.4"
-	],
-	"retract_before_wipe": [
-		"70%"
-	],
-	"retract_length_toolchange": [
-		"2"
-	],
-	"retract_lift_above": [
-		"0"
-	],
-	"retract_lift_below": [
-		"0"
-	],
-	"retract_lift_enforce": [
-		"All Surfaces"
-	],
-	"retract_restart_extra": [
-		"0"
-	],
-	"retract_restart_extra_toolchange": [
-		"0"
-	],
-	"retract_when_changing_layer": [
-		"1"
-	],
-	"retraction_distances_when_cut": [
-		"18"
-	],
-	"retraction_length": [
-		"0.8"
-	],
-	"retraction_minimum_travel": [
-		"1"
-	],
-	"retraction_speed": [
-		"30"
-	],
-	"travel_slope": [
-		"3"
-	],
-	"wipe": [
-		"1"
-	],
-	"wipe_distance": [
-		"1"
-	],
-	"z_hop": [
-		"0"
-	],
-	"z_hop_types": [
-		"Normal Lift"
-	],
-	"gcode_remap_x": "rev_x",
-	"gcode_remap_y": "pos_z",
-	"gcode_remap_z": "pos_y",
-	"belt_printer": "1",
-	"belt_slice_rotation": "x",
-	"belt_slice_rotation_angle": "45",
-	"belt_slice_rotation_global": "1",
-	"build_plate_tilt_x": "45",
-	"purge_in_prime_tower": "0",
-	"scan_first_layer": "0",
-	"auxiliary_fan": "0"
-}

resources/profiles/Custom/process/0.12mm Fine @MyBeltPrinter.json

@@ -1,20 +0,0 @@
-{
-	"type": "process",
-	"name": "0.12mm Fine @MyBeltPrinter",
-	"inherits": "fdm_process_klipper_common",
-	"from": "system",
-	"setting_id": "EugqqdLJ423bgEwN",
-	"instantiation": "true",
-	"layer_height": "0.12",
-	"initial_layer_print_height": "0.12",
-	"bottom_shell_layers": "5",
-	"top_shell_layers": "6",
-	"support_top_z_distance": "0.08",
-	"support_bottom_z_distance": "0.08",
-	"skirt_loops": "0",
-	"skirt_distance": "0",
-	"compatible_printers": [
-		"MyBeltPrinter 0.2 nozzle",
-		"MyBeltPrinter 0.4 nozzle"
-	]
-}

resources/profiles/Custom/process/0.20mm Standard @MyBeltPrinter.json

@@ -1,17 +0,0 @@
-{
-	"type": "process",
-	"name": "0.20mm Standard @MyBeltPrinter",
-	"inherits": "fdm_process_klipper_common",
-	"from": "system",
-	"setting_id": "YzCDAgH3uLOM53pF",
-	"instantiation": "true",
-	"layer_height": "0.2",
-	"initial_layer_print_height": "0.2",
-	"skirt_loops": "0",
-	"skirt_distance": "0",
-	"compatible_printers": [
-		"MyBeltPrinter 0.4 nozzle",
-		"MyBeltPrinter 0.6 nozzle",
-		"MyBeltPrinter 0.8 nozzle"
-	]
-}

resources/profiles/IdeaFormer.json

@@ -1,54 +0,0 @@
-{
-    "name": "IdeaFormer",
-    "version": "02.00.00.06",
-    "force_update": "0",
-    "description": "IdeaFormer belt printer configurations",
-    "machine_model_list": [
-        {
-            "name": "IdeaFormer IR3 V2",
-            "sub_path": "machine/IdeaFormer IR3 V2.json"
-        }
-    ],
-    "process_list": [
-        {
-            "name": "fdm_process_common",
-            "sub_path": "process/fdm_process_common.json"
-        },
-        {
-            "name": "0.20mm Standard @IdeaFormer IR3 V2",
-            "sub_path": "process/0.20mm Standard @IdeaFormer IR3 V2.json"
-        }
-    ],
-    "filament_list": [
-        {
-            "name": "Generic PLA @IdeaFormer IR3 V2",
-            "sub_path": "filament/Generic PLA @IdeaFormer IR3 V2.json"
-        },
-        {
-            "name": "eSUN PLA @IdeaFormer IR3 V2",
-            "sub_path": "filament/eSUN PLA @IdeaFormer IR3 V2.json"
-        },
-        {
-            "name": "Generic PETG @IdeaFormer IR3 V2",
-            "sub_path": "filament/Generic PETG @IdeaFormer IR3 V2.json"
-        }
-    ],
-    "machine_list": [
-        {
-            "name": "fdm_machine_common",
-            "sub_path": "machine/fdm_machine_common.json"
-        },
-        {
-            "name": "fdm_klipper_common",
-            "sub_path": "machine/fdm_klipper_common.json"
-        },
-        {
-            "name": "fdm_belt_common",
-            "sub_path": "machine/fdm_belt_common.json"
-        },
-        {
-            "name": "IdeaFormer IR3 V2 0.4 nozzle",
-            "sub_path": "machine/IdeaFormer IR3 V2 0.4 nozzle.json"
-        }
-    ]
-}

resources/profiles/IdeaFormer/filament/Generic PETG @IdeaFormer IR3 V2.json

@@ -1,77 +0,0 @@
-{
-	"type": "filament",
-	"name": "Generic PETG @IdeaFormer IR3 V2",
-	"inherits": "Generic PETG @System",
-	"from": "system",
-	"setting_id": "n4zaXcUUzTqAxq5f",
-	"instantiation": "true",
-	"filament_extruder_variant": [
-		"Direct Drive Standard"
-	],
-	"compatible_printers": [
-		"IdeaFormer IR3 V2 0.4 nozzle"
-	],
-	"filament_type": [
-		"PETG"
-	],
-	"filament_vendor": [
-		"Generic"
-	],
-	"filament_settings_id": [
-		"Generic PETG @IdeaFormer IR3 V2"
-	],
-	"filament_flow_ratio": [
-		"0.95"
-	],
-	"filament_cost": [
-		"25"
-	],
-	"nozzle_temperature": [
-		"240"
-	],
-	"nozzle_temperature_initial_layer": [
-		"245"
-	],
-	"cool_plate_temp": [
-		"80"
-	],
-	"cool_plate_temp_initial_layer": [
-		"80"
-	],
-	"fan_min_speed": [
-		"40"
-	],
-	"fan_max_speed": [
-		"60"
-	],
-	"overhang_fan_threshold": [
-		"25%"
-	],
-	"overhang_fan_speed": [
-		"80"
-	],
-	"full_fan_speed_layer": [
-		"8"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"slow_down_layer_time": [
-		"4"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"filament_retraction_length": [
-		"2"
-	],
-	"filament_retraction_speed": [
-		"40"
-	],
-	"filament_deretraction_speed": [
-		"40"
-	],
-	"filament_start_gcode": [
-		"; Generic PETG @IdeaFormer IR3 V2 — belt PETG, bed 80C"
-	]
-}

resources/profiles/IdeaFormer/filament/Generic PLA @IdeaFormer IR3 V2.json

@@ -1,65 +0,0 @@
-{
-	"type": "filament",
-	"name": "Generic PLA @IdeaFormer IR3 V2",
-	"inherits": "Generic PLA @System",
-	"from": "system",
-	"setting_id": "1xjycsEAFh6KQIhp",
-	"instantiation": "true",
-	"filament_extruder_variant": [
-		"Direct Drive Standard"
-	],
-	"compatible_printers": [
-		"IdeaFormer IR3 V2 0.4 nozzle"
-	],
-	"filament_type": [
-		"PLA"
-	],
-	"filament_vendor": [
-		"Generic"
-	],
-	"filament_settings_id": [
-		"Generic PLA @IdeaFormer IR3 V2"
-	],
-	"nozzle_temperature": [
-		"215"
-	],
-	"hot_plate_temp": [
-		"75"
-	],
-	"hot_plate_temp_initial_layer": [
-		"75"
-	],
-	"cool_plate_temp": [
-		"75"
-	],
-	"cool_plate_temp_initial_layer": [
-		"75"
-	],
-	"textured_plate_temp": [
-		"75"
-	],
-	"textured_plate_temp_initial_layer": [
-		"75"
-	],
-	"close_fan_the_first_x_layers": [
-		"3"
-	],
-	"full_fan_speed_layer": [
-		"8"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"filament_retraction_length": [
-		"1.5"
-	],
-	"filament_retraction_speed": [
-		"35"
-	],
-	"filament_deretraction_speed": [
-		"30"
-	],
-	"filament_start_gcode": [
-		"; Generic PLA @IdeaFormer IR3 V2 — belt PLA, bed 75C"
-	]
-}

resources/profiles/IdeaFormer/filament/eSUN PLA @IdeaFormer IR3 V2.json

@@ -1,36 +0,0 @@
-{
-	"type": "filament",
-	"name": "eSUN PLA @IdeaFormer IR3 V2",
-	"inherits": "Generic PLA @IdeaFormer IR3 V2",
-	"from": "system",
-	"setting_id": "XqkviBmFHEglXueX",
-	"filament_id": "OFkrxQC4",
-	"instantiation": "true",
-	"compatible_printers": [
-		"IdeaFormer IR3 V2 0.4 nozzle"
-	],
-	"filament_type": [
-		"PLA"
-	],
-	"filament_vendor": [
-		"eSUN"
-	],
-	"filament_settings_id": [
-		"eSUN PLA @IdeaFormer IR3 V2"
-	],
-	"nozzle_temperature_initial_layer": [
-		"200"
-	],
-	"nozzle_temperature": [
-		"200"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"pressure_advance": [
-		"0.12"
-	],
-	"filament_max_volumetric_speed": [
-		"20"
-	]
-}

resources/profiles/IdeaFormer/machine/IdeaFormer IR3 V2 0.4 nozzle.json

@@ -1,98 +0,0 @@
-{
-	"type": "machine",
-	"name": "IdeaFormer IR3 V2 0.4 nozzle",
-	"inherits": "fdm_belt_common",
-	"from": "system",
-	"setting_id": "MDQZgwRgg72lmjtu",
-	"instantiation": "true",
-	"printer_model": "IdeaFormer IR3 V2",
-	"printer_variant": "0.4",
-	"nozzle_diameter": [
-		"0.4"
-	],
-	"printable_area": [
-		"0x0",
-		"250x0",
-		"250x2000",
-		"0x2000"
-	],
-	"printable_height": "250",
-	"belt_printer_infinite_y": "1",
-	"thumbnails": [
-		"48x48/PNG",
-		"300x300/PNG"
-	],
-	"default_filament_profile": [
-		"Generic PLA @IdeaFormer IR3 V2"
-	],
-	"default_print_profile": "0.20mm Standard @IdeaFormer IR3 V2",
-	"use_relative_e_distances": "1",
-	"machine_max_acceleration_extruding": [
-		"5000",
-		"5000"
-	],
-	"machine_max_acceleration_retracting": [
-		"1000",
-		"1000"
-	],
-	"machine_max_acceleration_travel": [
-		"9000",
-		"9000"
-	],
-	"machine_max_acceleration_x": [
-		"5000",
-		"5000"
-	],
-	"machine_max_acceleration_y": [
-		"5000",
-		"5000"
-	],
-	"machine_max_acceleration_z": [
-		"100",
-		"100"
-	],
-	"machine_max_jerk_x": [
-		"10",
-		"10"
-	],
-	"machine_max_jerk_y": [
-		"10",
-		"10"
-	],
-	"machine_max_jerk_z": [
-		"0.4",
-		"0.4"
-	],
-	"machine_max_speed_e": [
-		"60",
-		"60"
-	],
-	"machine_max_speed_x": [
-		"500",
-		"500"
-	],
-	"machine_max_speed_y": [
-		"500",
-		"500"
-	],
-	"machine_max_speed_z": [
-		"20",
-		"20"
-	],
-	"retraction_length": [
-		"2"
-	],
-	"retraction_speed": [
-		"40"
-	],
-	"deretraction_speed": [
-		"40"
-	],
-	"retract_lift_below": [
-		"300"
-	],
-	"machine_start_gcode": "; === IdeaFormer IR3 V2 Belt Printer Start ===\n; Axes: X=lateral, Y=gantry height (probe), Z=belt\nG90 ; absolute positioning\nM82 ; absolute extruder\nG21 ; millimeters\nG28 ; home all axes\nG1 Y20 F500 ; lift nozzle 20mm from belt\n; Bed + hotend temps come from the active filament profile. Belt PLA requires 75 C bed — use Generic/eSun PLA @IdeaFormer IR3 V2 filament presets to get it automatically.\nM140 S[hot_plate_temp_initial_layer] ; set bed temp\nM104 S[nozzle_temperature_initial_layer] ; hotend temp\nM109 S[nozzle_temperature_initial_layer] ; wait hotend\nM190 S[hot_plate_temp_initial_layer] ; wait bed\n; --- Purge blob ---\nG92 E0 ; zero extruder\nG1 Y.1 ; nozzle 0.1mm above belt\nG1 E15 F1000 ; purge 15mm blob\nG1 Z20 E25 F800 ; belt advance 20mm + extrude\nG1 E23 ; retract 2mm\nG28 Y ; re-probe belt surface\nG1 E25 ; de-retract\n; --- Prime lines (full 250mm bed width) ---\nFMS_on ; filament motion sensor\nG1 X250 E50 F2000 ; prime line 1\nG92 Z0 ; reset belt origin\nG1 Z.4 ; belt advance 0.4mm\nG1 X0 E75 ; prime line 2\nG1 F1000 ; default feedrate\nG92 E0 Z0 ; zero extruder + belt = print origin\n",
-	"machine_end_gcode": "; === IdeaFormer IR3 V2 Belt Printer End ===\nM400 ; wait for moves to finish\nM104 S0 ; heater off\nM140 S0 ; bed off\nG92 E0 ; zero extruder\nG1 E-5 F300 ; retract 5mm\nG4 P5000 ; wait for ooze\nG91 ; relative mode - keep every end move relative on a belt\nG1 Y20 F1000 ; raise gantry 20mm for clearance over the part\nG1 Z676 F3000 ; advance belt one full machine-depth to eject the part and clean the belt\nG90 ; back to absolute\nG28 X ; home X only - NEVER 'G28' all: that homes Z/belt and reverses the whole print back into the gantry\nFMS_off ; filament motion sensor off\nBED_MESH_CLEAR\nM84 ; disable motors\n",
-	"machine_pause_gcode": "PAUSE",
-	"layer_change_gcode": "G92 E0 ; belt: reset extruder at layer change (relative E)"
-}

resources/profiles/IdeaFormer/machine/IdeaFormer IR3 V2.json

@@ -1,12 +0,0 @@
-{
-	"type": "machine_model",
-	"name": "IdeaFormer IR3 V2",
-	"model_id": "IdeaFormer_IR3_V2",
-	"nozzle_diameter": "0.4",
-	"machine_tech": "FFF",
-	"family": "IdeaFormer",
-	"bed_model": "",
-	"bed_texture": "",
-	"hotend_model": "",
-	"default_materials": "Generic PLA @IdeaFormer IR3 V2;Generic PETG @IdeaFormer IR3 V2"
-}

resources/profiles/IdeaFormer/machine/fdm_belt_common.json

@@ -1,99 +0,0 @@
-{
-	"type": "machine",
-	"name": "fdm_belt_common",
-	"inherits": "fdm_klipper_common",
-	"from": "system",
-	"instantiation": "false",
-	"gcode_flavor": "klipper",
-	"single_extruder_multi_material": "0",
-	"default_filament_profile": [
-		"Generic PLA @System"
-	],
-	"default_print_profile": "0.20mm Standard @IdeaFormer IR3 V2",
-	"max_layer_height": [
-		"0.32"
-	],
-	"min_layer_height": [
-		"0.08"
-	],
-	"deretraction_speed": [
-		"30"
-	],
-	"extruder_colour": [
-		"#FCE94F"
-	],
-	"extruder_offset": [
-		"0x0"
-	],
-	"long_retractions_when_cut": [
-		"0"
-	],
-	"nozzle_diameter": [
-		"0.4"
-	],
-	"retract_before_wipe": [
-		"70%"
-	],
-	"retract_length_toolchange": [
-		"2"
-	],
-	"retract_lift_above": [
-		"0"
-	],
-	"retract_lift_below": [
-		"0"
-	],
-	"retract_lift_enforce": [
-		"All Surfaces"
-	],
-	"retract_restart_extra": [
-		"0"
-	],
-	"retract_restart_extra_toolchange": [
-		"0"
-	],
-	"retract_when_changing_layer": [
-		"1"
-	],
-	"retraction_distances_when_cut": [
-		"18"
-	],
-	"retraction_length": [
-		"0.8"
-	],
-	"retraction_minimum_travel": [
-		"1"
-	],
-	"retraction_speed": [
-		"30"
-	],
-	"travel_slope": [
-		"3"
-	],
-	"wipe": [
-		"1"
-	],
-	"wipe_distance": [
-		"1"
-	],
-	"z_hop": [
-		"0"
-	],
-	"z_hop_types": [
-		"Normal Lift"
-	],
-	"gcode_remap_x": "rev_x",
-	"gcode_remap_y": "pos_z",
-	"gcode_remap_z": "pos_y",
-	"printer_extruder_id": [
-		"1"
-	],
-	"belt_printer": "1",
-	"belt_slice_rotation": "x",
-	"belt_slice_rotation_angle": "45",
-	"belt_slice_rotation_global": "1",
-	"build_plate_tilt_x": "45",
-	"purge_in_prime_tower": "0",
-	"scan_first_layer": "0",
-	"auxiliary_fan": "0"
-}

resources/profiles/IdeaFormer/machine/fdm_klipper_common.json

@@ -1,140 +0,0 @@
-{
-	"type": "machine",
-	"name": "fdm_klipper_common",
-	"inherits": "fdm_machine_common",
-	"from": "system",
-	"instantiation": "false",
-	"gcode_flavor": "klipper",
-	"machine_max_acceleration_e": [
-		"5000",
-		"5000"
-	],
-	"machine_max_acceleration_extruding": [
-		"20000",
-		"20000"
-	],
-	"machine_max_acceleration_retracting": [
-		"5000",
-		"5000"
-	],
-	"machine_max_acceleration_travel": [
-		"20000",
-		"20000"
-	],
-	"machine_max_acceleration_x": [
-		"20000",
-		"20000"
-	],
-	"machine_max_acceleration_y": [
-		"20000",
-		"20000"
-	],
-	"machine_max_acceleration_z": [
-		"500",
-		"200"
-	],
-	"machine_max_speed_e": [
-		"25",
-		"25"
-	],
-	"machine_max_speed_x": [
-		"500",
-		"200"
-	],
-	"machine_max_speed_y": [
-		"500",
-		"200"
-	],
-	"machine_max_speed_z": [
-		"12",
-		"12"
-	],
-	"machine_max_jerk_e": [
-		"2.5",
-		"2.5"
-	],
-	"machine_max_jerk_x": [
-		"9",
-		"9"
-	],
-	"machine_max_jerk_y": [
-		"9",
-		"9"
-	],
-	"machine_max_jerk_z": [
-		"0.2",
-		"0.4"
-	],
-	"machine_min_extruding_rate": [
-		"0",
-		"0"
-	],
-	"machine_min_travel_rate": [
-		"0",
-		"0"
-	],
-	"max_layer_height": [
-		"0.32"
-	],
-	"min_layer_height": [
-		"0.08"
-	],
-	"printable_height": "250",
-	"extruder_clearance_radius": "65",
-	"extruder_clearance_height_to_rod": "36",
-	"extruder_clearance_height_to_lid": "140",
-	"printer_settings_id": "",
-	"printer_technology": "FFF",
-	"printer_variant": "0.4",
-	"retraction_minimum_travel": [
-		"1"
-	],
-	"retract_before_wipe": [
-		"70%"
-	],
-	"retract_when_changing_layer": [
-		"1"
-	],
-	"retraction_length": [
-		"0.8"
-	],
-	"retract_length_toolchange": [
-		"2"
-	],
-	"z_hop": [
-		"0.4"
-	],
-	"retract_restart_extra": [
-		"0"
-	],
-	"retract_restart_extra_toolchange": [
-		"0"
-	],
-	"retraction_speed": [
-		"30"
-	],
-	"deretraction_speed": [
-		"30"
-	],
-	"z_hop_types": "Normal Lift",
-	"single_extruder_multi_material": "1",
-	"change_filament_gcode": "",
-	"wipe": [
-		"1"
-	],
-	"default_filament_profile": [
-		"Generic PLA @System"
-	],
-	"default_print_profile": "0.20mm Standard @MyKlipper",
-	"bed_exclude_area": [
-		"0x0"
-	],
-	"machine_start_gcode": "M190 S[bed_temperature_initial_layer_single]\nM109 S[nozzle_temperature_initial_layer]\nPRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single]\n",
-	"machine_end_gcode": "PRINT_END",
-	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
-	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
-	"machine_pause_gcode": "PAUSE",
-	"scan_first_layer": "0",
-	"nozzle_type": "undefine",
-	"auxiliary_fan": "0"
-}

resources/profiles/IdeaFormer/machine/fdm_machine_common.json

@@ -1,118 +0,0 @@
-{
-	"type": "machine",
-	"name": "fdm_machine_common",
-	"from": "system",
-	"instantiation": "false",
-	"printer_technology": "FFF",
-	"deretraction_speed": [
-		"40"
-	],
-	"extruder_colour": [
-		"#FCE94F"
-	],
-	"extruder_offset": [
-		"0x0"
-	],
-	"gcode_flavor": "marlin",
-	"machine_max_acceleration_e": [
-		"5000"
-	],
-	"machine_max_acceleration_extruding": [
-		"10000"
-	],
-	"machine_max_acceleration_retracting": [
-		"1000"
-	],
-	"machine_max_acceleration_x": [
-		"10000"
-	],
-	"machine_max_acceleration_y": [
-		"10000"
-	],
-	"machine_max_acceleration_z": [
-		"500"
-	],
-	"machine_max_speed_e": [
-		"60"
-	],
-	"machine_max_speed_x": [
-		"500"
-	],
-	"machine_max_speed_y": [
-		"500"
-	],
-	"machine_max_speed_z": [
-		"10"
-	],
-	"machine_max_jerk_e": [
-		"5"
-	],
-	"machine_max_jerk_x": [
-		"8"
-	],
-	"machine_max_jerk_y": [
-		"8"
-	],
-	"machine_max_jerk_z": [
-		"0.4"
-	],
-	"machine_min_extruding_rate": [
-		"0"
-	],
-	"machine_min_travel_rate": [
-		"0"
-	],
-	"max_layer_height": [
-		"0.32"
-	],
-	"min_layer_height": [
-		"0.08"
-	],
-	"printable_height": "250",
-	"extruder_clearance_radius": "65",
-	"extruder_clearance_height_to_rod": "36",
-	"extruder_clearance_height_to_lid": "140",
-	"nozzle_diameter": [
-		"0.4"
-	],
-	"printer_settings_id": "",
-	"printer_variant": "0.4",
-	"retraction_minimum_travel": [
-		"2"
-	],
-	"retract_before_wipe": [
-		"70%"
-	],
-	"retract_when_changing_layer": [
-		"1"
-	],
-	"retraction_length": [
-		"1"
-	],
-	"retract_length_toolchange": [
-		"1"
-	],
-	"z_hop": [
-		"0"
-	],
-	"retract_restart_extra": [
-		"0"
-	],
-	"retract_restart_extra_toolchange": [
-		"0"
-	],
-	"retraction_speed": [
-		"60"
-	],
-	"single_extruder_multi_material": "1",
-	"change_filament_gcode": "",
-	"wipe": [
-		"1"
-	],
-	"default_print_profile": "",
-	"machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up",
-	"machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end",
-	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
-	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
-	"machine_pause_gcode": "M601"
-}

resources/profiles/IdeaFormer/process/0.20mm Standard @IdeaFormer IR3 V2.json

@@ -1,23 +0,0 @@
-{
-	"type": "process",
-	"name": "0.20mm Standard @IdeaFormer IR3 V2",
-	"inherits": "fdm_process_common",
-	"from": "system",
-	"setting_id": "91atcIwv5728phqX",
-	"instantiation": "true",
-	"layer_height": "0.2",
-	"initial_layer_print_height": "0.2",
-	"initial_layer_line_width": "0.42",
-	"wall_loops": "2",
-	"reduce_infill_retraction": "1",
-	"detect_overhang_wall": "1",
-	"skirt_loops": "0",
-	"skirt_distance": "0",
-	"sparse_infill_pattern": "grid",
-	"sparse_infill_speed": "200",
-	"support_base_pattern": "rectilinear",
-	"support_interface_pattern": "rectilinear",
-	"compatible_printers": [
-		"IdeaFormer IR3 V2 0.4 nozzle"
-	]
-}

resources/profiles/IdeaFormer/process/fdm_process_common.json

@@ -1,106 +0,0 @@
-{
-	"type": "process",
-	"name": "fdm_process_common",
-	"from": "system",
-	"instantiation": "false",
-	"reduce_crossing_wall": "0",
-	"max_travel_detour_distance": "0",
-	"bottom_surface_pattern": "monotonic",
-	"bottom_shell_thickness": "0",
-	"bridge_speed": "50",
-	"brim_width": "5",
-	"brim_object_gap": "0.1",
-	"compatible_printers": [],
-	"compatible_printers_condition": "",
-	"print_sequence": "by layer",
-	"default_acceleration": "1000",
-	"initial_layer_acceleration": "500",
-	"top_surface_acceleration": "1000",
-	"travel_acceleration": "1000",
-	"inner_wall_acceleration": "1000",
-	"outer_wall_acceleration": "700",
-	"bridge_no_support": "0",
-	"draft_shield": "disabled",
-	"elefant_foot_compensation": "0",
-	"enable_arc_fitting": "0",
-	"wall_infill_order": "inner wall/outer wall/infill",
-	"infill_direction": "45",
-	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "crosshatch",
-	"initial_layer_print_height": "0.2",
-	"infill_combination": "0",
-	"infill_wall_overlap": "25%",
-	"interface_shells": "0",
-	"ironing_flow": "10%",
-	"ironing_spacing": "0.15",
-	"ironing_speed": "30",
-	"ironing_type": "no ironing",
-	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[initial_tool]}_{printer_model}_{print_time}.gcode",
-	"detect_overhang_wall": "1",
-	"slowdown_for_curled_perimeters": "1",
-	"overhang_1_4_speed": "0",
-	"overhang_2_4_speed": "50",
-	"overhang_3_4_speed": "30",
-	"overhang_4_4_speed": "10",
-	"line_width": "110%",
-	"inner_wall_line_width": "110%",
-	"outer_wall_line_width": "100%",
-	"top_surface_line_width": "93.75%",
-	"sparse_infill_line_width": "110%",
-	"initial_layer_line_width": "120%",
-	"internal_solid_infill_line_width": "120%",
-	"support_line_width": "96%",
-	"wall_loops": "3",
-	"print_settings_id": "",
-	"raft_layers": "0",
-	"seam_position": "aligned",
-	"skirt_distance": "2",
-	"skirt_height": "3",
-	"min_skirt_length": "4",
-	"skirt_loops": "0",
-	"minimum_sparse_infill_area": "15",
-	"spiral_mode": "0",
-	"standby_temperature_delta": "-5",
-	"enable_support": "0",
-	"resolution": "0.012",
-	"support_type": "normal(auto)",
-	"support_on_build_plate_only": "0",
-	"support_top_z_distance": "0.2",
-	"support_bottom_z_distance": "0.2",
-	"support_filament": "0",
-	"support_interface_loop_pattern": "0",
-	"support_interface_filament": "0",
-	"support_interface_top_layers": "2",
-	"support_interface_bottom_layers": "2",
-	"support_interface_spacing": "0.5",
-	"support_interface_speed": "80",
-	"support_base_pattern": "default",
-	"support_base_pattern_spacing": "2.5",
-	"support_speed": "150",
-	"support_threshold_angle": "30",
-	"support_object_xy_distance": "0.35",
-	"tree_support_branch_angle": "30",
-	"tree_support_wall_count": "0",
-	"detect_thin_wall": "0",
-	"top_surface_pattern": "monotonicline",
-	"top_shell_thickness": "0.8",
-	"enable_prime_tower": "1",
-	"wipe_tower_no_sparse_layers": "0",
-	"prime_tower_width": "60",
-	"xy_hole_compensation": "0",
-	"xy_contour_compensation": "0",
-	"layer_height": "0.2",
-	"bottom_shell_layers": "3",
-	"top_shell_layers": "4",
-	"bridge_flow": "1",
-	"initial_layer_speed": "45",
-	"initial_layer_infill_speed": "45",
-	"outer_wall_speed": "45",
-	"inner_wall_speed": "80",
-	"sparse_infill_speed": "150",
-	"internal_solid_infill_speed": "150",
-	"top_surface_speed": "50",
-	"gap_infill_speed": "30",
-	"travel_speed": "200"
-}

resources/profiles/Printcepts.json

@@ -1,54 +0,0 @@
-{
-	"name": "Printcepts",
-	"version": "01.00.00.04",
-	"force_update": "0",
-	"description": "Printcepts belt printer configurations",
-	"machine_model_list": [
-		{
-			"name": "BabyBelt Pro",
-			"sub_path": "machine/BabyBelt Pro.json"
-		}
-	],
-	"process_list": [
-		{
-			"name": "fdm_process_common",
-			"sub_path": "process/fdm_process_common.json"
-		},
-		{
-			"name": "0.20mm Standard @BabyBelt Pro",
-			"sub_path": "process/0.20mm Standard @BabyBelt Pro.json"
-		}
-	],
-	"filament_list": [
-		{
-			"name": "Generic PLA @BabyBelt Pro",
-			"sub_path": "filament/Generic PLA @BabyBelt Pro.json"
-		},
-		{
-			"name": "eSUN PLA @BabyBelt Pro",
-			"sub_path": "filament/eSUN PLA @BabyBelt Pro.json"
-		},
-		{
-			"name": "Generic PETG @BabyBelt Pro",
-			"sub_path": "filament/Generic PETG @BabyBelt Pro.json"
-		}
-	],
-	"machine_list": [
-		{
-			"name": "fdm_machine_common",
-			"sub_path": "machine/fdm_machine_common.json"
-		},
-		{
-			"name": "fdm_klipper_common",
-			"sub_path": "machine/fdm_klipper_common.json"
-		},
-		{
-			"name": "fdm_belt_common",
-			"sub_path": "machine/fdm_belt_common.json"
-		},
-		{
-			"name": "BabyBelt Pro 0.4 nozzle",
-			"sub_path": "machine/BabyBelt Pro 0.4 nozzle.json"
-		}
-	]
-}

resources/profiles/Printcepts/BabyBelt Pro_bed_texture.svg

@@ -1,70 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<svg xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" width="95.0mm" height="500.0mm" viewBox="0 0 95.0 500.0" preserveAspectRatio="xMidYMid meet">
-  <!-- Printcepts BabyBelt Pro bed texture: 95 x 500 mm belt plate. -->
-  <!-- Transparent plate; green (#195F30) BabyBelt Pro logo centered along X, near the bottom edge. -->
-  <rect x="0" y="0" width="95.0" height="500.0" fill="none"/>
-  <g transform="translate(14.2500,436.3488) scale(0.067538)">
-    <g transform="translate(-11.000000,692.938562) scale(0.100000,-0.100000)"
-fill="#195F30" stroke="none">
-<path d="M1963 5604 l-1423 -1324 0 -2050 0 -2050 443 0 c244 0 741 3 1105 7
-l662 6 0 746 c-1 575 -4 768 -14 841 -47 324 -179 486 -473 581 -40 12 -73 26
--73 30 0 4 32 17 72 29 212 64 333 166 378 320 35 121 38 191 32 868 l-5 662
--629 0 c-395 0 -628 4 -628 10 0 5 635 601 1410 1325 776 724 1410 1318 1410
-1321 0 2 -190 4 -422 3 l-423 0 -1422 -1325z m-334 -2029 c143 -16 174 -96
-173 -446 -2 -411 -24 -458 -224 -462 l-93 -2 -3 450 c-1 248 0 456 3 463 3 9
-18 12 47 8 24 -3 67 -8 97 -11z m-4 -1556 c160 -29 173 -62 182 -469 9 -455
--14 -593 -108 -641 -39 -19 -193 -44 -210 -33 -10 6 -13 1147 -3 1157 6 6 45
-2 139 -14z"/>
-<path d="M3464 5979 c-142 -132 -263 -245 -268 -250 -6 -5 69 -9 190 -9 l199
-1 268 249 267 250 -198 0 -198 0 -260 -241z"/>
-<path d="M3650 5649 c-135 -126 -254 -238 -265 -249 -19 -20 -18 -20 177 -20
-l197 0 228 211 c125 116 246 229 268 250 l40 39 -200 -1 -200 0 -245 -230z"/>
-<path d="M2537 5089 c-101 -24 -204 -105 -251 -197 -96 -190 -19 -420 172
--514 l67 -33 2670 0 2670 0 57 27 c74 34 146 107 184 183 43 88 43 230 0 322
--35 76 -113 153 -193 191 l-58 27 -2640 2 c-1513 0 -2656 -3 -2678 -8z m5063
--77 c-57 -37 -118 -111 -140 -168 -31 -82 -25 -206 12 -279 26 -49 93 -121
-133 -143 15 -8 -640 -11 -2410 -11 l-2430 0 30 21 c200 146 201 425 1 569
-l-39 29 2434 -1 c2263 0 2432 -1 2409 -17z m-4890 -43 c270 -122 185 -526
--109 -522 -257 2 -370 324 -170 485 74 60 194 76 279 37z m5201 -12 c94 -55
-140 -135 140 -242 0 -285 -393 -374 -517 -117 -26 54 -30 162 -9 219 28 74 97
-139 173 164 53 17 166 4 213 -24z"/>
-<path d="M2917 3973 c-4 -174 -7 -550 -7 -835 l0 -518 326 0 326 0 -7 150 -7
-150 110 0 110 0 11 -32 c5 -18 26 -86 46 -150 l36 -118 325 0 c179 0 323 4
-320 9 -3 4 -155 374 -337 822 -182 448 -333 820 -336 827 -4 9 -105 12 -457
-12 l-453 0 -6 -317z m773 -745 c0 -5 -47 -8 -104 -8 l-103 0 -7 92 c-3 50 -6
-202 -5 337 l1 246 109 -330 c60 -181 109 -333 109 -337z"/>
-<path d="M4680 3455 l0 -835 448 0 c693 1 885 16 985 80 99 63 126 132 134
-340 12 327 -44 405 -342 476 -28 7 -27 8 25 19 199 42 255 95 267 248 11 146
--32 285 -110 353 -145 126 -329 153 -1049 154 l-358 0 0 -835z m846 520 c36
--23 44 -54 44 -162 0 -152 -29 -183 -170 -183 l-40 0 0 186 0 187 71 -6 c39
--3 82 -13 95 -22z m4 -625 c33 -18 40 -52 40 -208 0 -200 -9 -214 -143 -228
-l-67 -7 0 233 0 233 74 -6 c41 -3 84 -10 96 -17z"/>
-<path d="M6150 4286 c0 -3 131 -242 290 -531 l290 -526 0 -304 0 -305 385 0
-385 0 0 299 0 299 305 533 305 534 -377 3 c-207 1 -381 -2 -385 -6 -16 -16
--110 -258 -172 -444 l-62 -187 -18 77 c-18 75 -139 450 -171 525 l-15 37 -380
-0 c-209 0 -380 -2 -380 -4z"/>
-<path d="M2910 1355 l0 -1185 830 0 830 0 0 240 0 240 -350 0 -350 0 0 255 0
-255 300 0 300 0 0 230 0 230 -300 0 -300 0 0 220 0 220 320 0 320 0 0 240 0
-240 -800 0 -800 0 0 -1185z"/>
-<path d="M4680 1355 l0 -1185 775 0 775 0 0 240 0 240 -295 0 -295 0 0 945 0
-945 -480 0 -480 0 0 -1185z"/>
-<path d="M5800 2300 l0 -240 280 0 280 0 0 -945 0 -945 480 0 480 0 0 945 0
-945 285 0 285 0 0 240 0 240 -1045 0 -1045 0 0 -240z"/>
-<path d="M8032 1358 l-2 -1188 1008 1 c621 1 971 5 912 10 -309 27 -631 139
--885 306 -593 391 -984 1122 -1025 1918 -4 77 -8 -394 -8 -1047z"/>
-<path d="M7441 1934 c-43 -36 -59 -70 -70 -148 -18 -124 16 -252 76 -291 32
--21 226 -33 328 -20 114 14 161 97 153 269 -5 96 -24 151 -68 191 -20 18 -39
-20 -205 23 l-182 3 -32 -27z m389 -199 c7 -8 10 -22 6 -30 -4 -13 -34 -15
--186 -15 -189 0 -202 3 -186 45 8 22 348 22 366 0z"/>
-<path d="M7450 1267 c-14 -6 -35 -32 -47 -57 -21 -41 -23 -58 -23 -222 l0
--178 270 0 270 0 0 105 0 105 -121 0 -120 0 3 28 3 27 118 3 117 3 0 99 0 100
--113 0 c-121 0 -138 -7 -162 -65 -8 -19 -9 -19 -12 2 -10 55 -116 84 -183 50z
-m134 -203 c15 -38 8 -44 -54 -44 -62 0 -69 6 -54 44 9 23 99 23 108 0z"/>
-<path d="M466 1193 l-29 -43 -163 0 -164 0 0 -235 0 -235 165 0 165 0 27 -42
-28 -42 3 163 c1 89 1 233 0 319 l-3 157 -29 -42z"/>
-<path d="M7443 620 c-48 -20 -58 -60 -61 -262 l-4 -188 271 0 271 0 0 110 0
-110 -110 0 -110 0 0 70 c0 76 -21 145 -51 160 -22 12 -176 12 -206 0z m161
--186 c15 -39 8 -44 -64 -44 -72 0 -79 5 -64 44 9 23 119 23 128 0z"/>
-</g>
-  </g>
-</svg>

resources/profiles/Printcepts/filament/Generic PETG @BabyBelt Pro.json

@@ -1,77 +0,0 @@
-{
-	"type": "filament",
-	"name": "Generic PETG @BabyBelt Pro",
-	"inherits": "Generic PETG @System",
-	"from": "system",
-	"setting_id": "gCzHpDNgVwQR6tgk",
-	"instantiation": "true",
-	"filament_extruder_variant": [
-		"Direct Drive Standard"
-	],
-	"compatible_printers": [
-		"BabyBelt Pro 0.4 nozzle"
-	],
-	"filament_type": [
-		"PETG"
-	],
-	"filament_vendor": [
-		"Generic"
-	],
-	"filament_settings_id": [
-		"Generic PETG @BabyBelt Pro"
-	],
-	"filament_flow_ratio": [
-		"0.95"
-	],
-	"filament_cost": [
-		"25"
-	],
-	"nozzle_temperature": [
-		"240"
-	],
-	"nozzle_temperature_initial_layer": [
-		"245"
-	],
-	"cool_plate_temp": [
-		"80"
-	],
-	"cool_plate_temp_initial_layer": [
-		"80"
-	],
-	"fan_min_speed": [
-		"40"
-	],
-	"fan_max_speed": [
-		"60"
-	],
-	"overhang_fan_threshold": [
-		"25%"
-	],
-	"overhang_fan_speed": [
-		"80"
-	],
-	"full_fan_speed_layer": [
-		"8"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"slow_down_layer_time": [
-		"4"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"filament_retraction_length": [
-		"2"
-	],
-	"filament_retraction_speed": [
-		"40"
-	],
-	"filament_deretraction_speed": [
-		"40"
-	],
-	"filament_start_gcode": [
-		"; Generic PETG @BabyBelt Pro — belt PETG, bed 80C"
-	]
-}

resources/profiles/Printcepts/filament/Generic PLA @BabyBelt Pro.json

@@ -1,65 +0,0 @@
-{
-	"type": "filament",
-	"name": "Generic PLA @BabyBelt Pro",
-	"inherits": "Generic PLA @System",
-	"from": "system",
-	"setting_id": "24PpcnhVx9v5f4fD",
-	"instantiation": "true",
-	"filament_extruder_variant": [
-		"Direct Drive Standard"
-	],
-	"compatible_printers": [
-		"BabyBelt Pro 0.4 nozzle"
-	],
-	"filament_type": [
-		"PLA"
-	],
-	"filament_vendor": [
-		"Generic"
-	],
-	"filament_settings_id": [
-		"Generic PLA @BabyBelt Pro"
-	],
-	"nozzle_temperature": [
-		"215"
-	],
-	"hot_plate_temp": [
-		"75"
-	],
-	"hot_plate_temp_initial_layer": [
-		"75"
-	],
-	"cool_plate_temp": [
-		"75"
-	],
-	"cool_plate_temp_initial_layer": [
-		"75"
-	],
-	"textured_plate_temp": [
-		"75"
-	],
-	"textured_plate_temp_initial_layer": [
-		"75"
-	],
-	"close_fan_the_first_x_layers": [
-		"3"
-	],
-	"full_fan_speed_layer": [
-		"8"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"filament_retraction_length": [
-		"1.5"
-	],
-	"filament_retraction_speed": [
-		"35"
-	],
-	"filament_deretraction_speed": [
-		"30"
-	],
-	"filament_start_gcode": [
-		"; Generic PLA @BabyBelt Pro — belt PLA, bed 75C"
-	]
-}

resources/profiles/Printcepts/filament/eSUN PLA @BabyBelt Pro.json

@@ -1,36 +0,0 @@
-{
-	"type": "filament",
-	"name": "eSUN PLA @BabyBelt Pro",
-	"inherits": "Generic PLA @BabyBelt Pro",
-	"from": "system",
-	"setting_id": "EH3X7oE0DU5tSpjW",
-	"filament_id": "OFkrxQC4",
-	"instantiation": "true",
-	"compatible_printers": [
-		"BabyBelt Pro 0.4 nozzle"
-	],
-	"filament_type": [
-		"PLA"
-	],
-	"filament_vendor": [
-		"eSUN"
-	],
-	"filament_settings_id": [
-		"eSUN PLA @BabyBelt Pro"
-	],
-	"nozzle_temperature_initial_layer": [
-		"200"
-	],
-	"nozzle_temperature": [
-		"200"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"pressure_advance": [
-		"0.12"
-	],
-	"filament_max_volumetric_speed": [
-		"20"
-	]
-}

resources/profiles/Printcepts/machine/BabyBelt Pro 0.4 nozzle.json

@@ -1,88 +0,0 @@
-{
-	"type": "machine",
-	"name": "BabyBelt Pro 0.4 nozzle",
-	"inherits": "fdm_belt_common",
-	"from": "system",
-	"setting_id": "34OWINlJpJgA9DwQ",
-	"instantiation": "true",
-	"printer_model": "BabyBelt Pro",
-	"printer_variant": "0.4",
-	"nozzle_diameter": [
-		"0.4"
-	],
-	"default_filament_profile": [
-		"Generic PLA @BabyBelt Pro"
-	],
-	"default_print_profile": "0.20mm Standard @BabyBelt Pro",
-	"printable_area": [
-		"0x0",
-		"95x0",
-		"95x500",
-		"0x500"
-	],
-	"printable_height": "100",
-	"best_object_pos": "0.5,0.05",
-	"nozzle_type": [
-		"hardened_steel"
-	],
-	"printer_extruder_id": [
-		"1"
-	],
-	"printer_extruder_variant": [
-		"Direct Drive Standard"
-	],
-	"thumbnails": [
-		"48x48/PNG",
-		"300x300/PNG"
-	],
-	"machine_max_acceleration_e": [
-		"500",
-		"5000"
-	],
-	"machine_max_acceleration_extruding": [
-		"500",
-		"20000"
-	],
-	"machine_max_acceleration_retracting": [
-		"500",
-		"5000"
-	],
-	"machine_max_acceleration_x": [
-		"500",
-		"20000"
-	],
-	"machine_max_acceleration_y": [
-		"500",
-		"20000"
-	],
-	"machine_max_junction_deviation": [
-		"0.01",
-		"0.01"
-	],
-	"machine_max_speed_x": [
-		"50",
-		"200"
-	],
-	"machine_max_speed_y": [
-		"50",
-		"200"
-	],
-	"machine_max_speed_z": [
-		"5",
-		"12"
-	],
-	"retraction_length": [
-		"1.5"
-	],
-	"retraction_speed": [
-		"20"
-	],
-	"deretraction_speed": [
-		"25"
-	],
-	"retract_lift_enforce": [
-		"Top and Bottom"
-	],
-	"support_chamber_temp_control": "0",
-	"machine_start_gcode": ";Start GCode\nPRINT_START ANGLE=[belt_slice_rotation_angle] EXTRUDER=[nozzle_temperature_initial_layer] BED=[hot_plate_temp_initial_layer] MATERIAL=[filament_type]\n"
-}

resources/profiles/Printcepts/machine/BabyBelt Pro.json

@@ -1,12 +0,0 @@
-{
-	"type": "machine_model",
-	"name": "BabyBelt Pro",
-	"model_id": "Printcepts_BabyBelt_Pro",
-	"nozzle_diameter": "0.4",
-	"machine_tech": "FFF",
-	"family": "Printcepts",
-	"bed_model": "",
-	"bed_texture": "BabyBelt Pro_bed_texture.svg",
-	"hotend_model": "",
-	"default_materials": "Generic PLA @BabyBelt Pro;Generic PETG @BabyBelt Pro"
-}

resources/profiles/Printcepts/machine/fdm_belt_common.json

@@ -1,99 +0,0 @@
-{
-	"type": "machine",
-	"name": "fdm_belt_common",
-	"inherits": "fdm_klipper_common",
-	"from": "system",
-	"instantiation": "false",
-	"gcode_flavor": "klipper",
-	"single_extruder_multi_material": "0",
-	"default_filament_profile": [
-		"Generic PLA @System"
-	],
-	"default_print_profile": "0.20mm Standard @BabyBelt Pro",
-	"max_layer_height": [
-		"0.32"
-	],
-	"min_layer_height": [
-		"0.08"
-	],
-	"deretraction_speed": [
-		"30"
-	],
-	"extruder_colour": [
-		"#FCE94F"
-	],
-	"extruder_offset": [
-		"0x0"
-	],
-	"long_retractions_when_cut": [
-		"0"
-	],
-	"nozzle_diameter": [
-		"0.4"
-	],
-	"retract_before_wipe": [
-		"70%"
-	],
-	"retract_length_toolchange": [
-		"2"
-	],
-	"retract_lift_above": [
-		"0"
-	],
-	"retract_lift_below": [
-		"0"
-	],
-	"retract_lift_enforce": [
-		"All Surfaces"
-	],
-	"retract_restart_extra": [
-		"0"
-	],
-	"retract_restart_extra_toolchange": [
-		"0"
-	],
-	"retract_when_changing_layer": [
-		"1"
-	],
-	"retraction_distances_when_cut": [
-		"18"
-	],
-	"retraction_length": [
-		"0.8"
-	],
-	"retraction_minimum_travel": [
-		"1"
-	],
-	"retraction_speed": [
-		"30"
-	],
-	"travel_slope": [
-		"3"
-	],
-	"wipe": [
-		"1"
-	],
-	"wipe_distance": [
-		"1"
-	],
-	"z_hop": [
-		"0"
-	],
-	"z_hop_types": [
-		"Normal Lift"
-	],
-	"gcode_remap_x": "rev_x",
-	"gcode_remap_y": "pos_z",
-	"gcode_remap_z": "pos_y",
-	"printer_extruder_id": [
-		"1"
-	],
-	"belt_printer": "1",
-	"belt_slice_rotation": "x",
-	"belt_slice_rotation_angle": "45",
-	"belt_slice_rotation_global": "1",
-	"build_plate_tilt_x": "45",
-	"purge_in_prime_tower": "0",
-	"scan_first_layer": "0",
-	"auxiliary_fan": "0"
-}

resources/profiles/Printcepts/machine/fdm_klipper_common.json

@@ -1,140 +0,0 @@
-{
-	"type": "machine",
-	"name": "fdm_klipper_common",
-	"inherits": "fdm_machine_common",
-	"from": "system",
-	"instantiation": "false",
-	"gcode_flavor": "klipper",
-	"machine_max_acceleration_e": [
-		"5000",
-		"5000"
-	],
-	"machine_max_acceleration_extruding": [
-		"20000",
-		"20000"
-	],
-	"machine_max_acceleration_retracting": [
-		"5000",
-		"5000"
-	],
-	"machine_max_acceleration_travel": [
-		"20000",
-		"20000"
-	],
-	"machine_max_acceleration_x": [
-		"20000",
-		"20000"
-	],
-	"machine_max_acceleration_y": [
-		"20000",
-		"20000"
-	],
-	"machine_max_acceleration_z": [
-		"500",
-		"200"
-	],
-	"machine_max_speed_e": [
-		"25",
-		"25"
-	],
-	"machine_max_speed_x": [
-		"500",
-		"200"
-	],
-	"machine_max_speed_y": [
-		"500",
-		"200"
-	],
-	"machine_max_speed_z": [
-		"12",
-		"12"
-	],
-	"machine_max_jerk_e": [
-		"2.5",
-		"2.5"
-	],
-	"machine_max_jerk_x": [
-		"9",
-		"9"
-	],
-	"machine_max_jerk_y": [
-		"9",
-		"9"
-	],
-	"machine_max_jerk_z": [
-		"0.2",
-		"0.4"
-	],
-	"machine_min_extruding_rate": [
-		"0",
-		"0"
-	],
-	"machine_min_travel_rate": [
-		"0",
-		"0"
-	],
-	"max_layer_height": [
-		"0.32"
-	],
-	"min_layer_height": [
-		"0.08"
-	],
-	"printable_height": "250",
-	"extruder_clearance_radius": "65",
-	"extruder_clearance_height_to_rod": "36",
-	"extruder_clearance_height_to_lid": "140",
-	"printer_settings_id": "",
-	"printer_technology": "FFF",
-	"printer_variant": "0.4",
-	"retraction_minimum_travel": [
-		"1"
-	],
-	"retract_before_wipe": [
-		"70%"
-	],
-	"retract_when_changing_layer": [
-		"1"
-	],
-	"retraction_length": [
-		"0.8"
-	],
-	"retract_length_toolchange": [
-		"2"
-	],
-	"z_hop": [
-		"0.4"
-	],
-	"retract_restart_extra": [
-		"0"
-	],
-	"retract_restart_extra_toolchange": [
-		"0"
-	],
-	"retraction_speed": [
-		"30"
-	],
-	"deretraction_speed": [
-		"30"
-	],
-	"z_hop_types": "Normal Lift",
-	"single_extruder_multi_material": "1",
-	"change_filament_gcode": "",
-	"wipe": [
-		"1"
-	],
-	"default_filament_profile": [
-		"Generic PLA @System"
-	],
-	"default_print_profile": "0.20mm Standard @MyKlipper",
-	"bed_exclude_area": [
-		"0x0"
-	],
-	"machine_start_gcode": "M190 S[bed_temperature_initial_layer_single]\nM109 S[nozzle_temperature_initial_layer]\nPRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single]\n",
-	"machine_end_gcode": "PRINT_END",
-	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
-	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
-	"machine_pause_gcode": "PAUSE",
-	"scan_first_layer": "0",
-	"nozzle_type": "undefine",
-	"auxiliary_fan": "0"
-}

resources/profiles/Printcepts/machine/fdm_machine_common.json

@@ -1,118 +0,0 @@
-{
-	"type": "machine",
-	"name": "fdm_machine_common",
-	"from": "system",
-	"instantiation": "false",
-	"printer_technology": "FFF",
-	"deretraction_speed": [
-		"40"
-	],
-	"extruder_colour": [
-		"#FCE94F"
-	],
-	"extruder_offset": [
-		"0x0"
-	],
-	"gcode_flavor": "marlin",
-	"machine_max_acceleration_e": [
-		"5000"
-	],
-	"machine_max_acceleration_extruding": [
-		"10000"
-	],
-	"machine_max_acceleration_retracting": [
-		"1000"
-	],
-	"machine_max_acceleration_x": [
-		"10000"
-	],
-	"machine_max_acceleration_y": [
-		"10000"
-	],
-	"machine_max_acceleration_z": [
-		"500"
-	],
-	"machine_max_speed_e": [
-		"60"
-	],
-	"machine_max_speed_x": [
-		"500"
-	],
-	"machine_max_speed_y": [
-		"500"
-	],
-	"machine_max_speed_z": [
-		"10"
-	],
-	"machine_max_jerk_e": [
-		"5"
-	],
-	"machine_max_jerk_x": [
-		"8"
-	],
-	"machine_max_jerk_y": [
-		"8"
-	],
-	"machine_max_jerk_z": [
-		"0.4"
-	],
-	"machine_min_extruding_rate": [
-		"0"
-	],
-	"machine_min_travel_rate": [
-		"0"
-	],
-	"max_layer_height": [
-		"0.32"
-	],
-	"min_layer_height": [
-		"0.08"
-	],
-	"printable_height": "250",
-	"extruder_clearance_radius": "65",
-	"extruder_clearance_height_to_rod": "36",
-	"extruder_clearance_height_to_lid": "140",
-	"nozzle_diameter": [
-		"0.4"
-	],
-	"printer_settings_id": "",
-	"printer_variant": "0.4",
-	"retraction_minimum_travel": [
-		"2"
-	],
-	"retract_before_wipe": [
-		"70%"
-	],
-	"retract_when_changing_layer": [
-		"1"
-	],
-	"retraction_length": [
-		"1"
-	],
-	"retract_length_toolchange": [
-		"1"
-	],
-	"z_hop": [
-		"0"
-	],
-	"retract_restart_extra": [
-		"0"
-	],
-	"retract_restart_extra_toolchange": [
-		"0"
-	],
-	"retraction_speed": [
-		"60"
-	],
-	"single_extruder_multi_material": "1",
-	"change_filament_gcode": "",
-	"wipe": [
-		"1"
-	],
-	"default_print_profile": "",
-	"machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up",
-	"machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end",
-	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
-	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
-	"machine_pause_gcode": "M601"
-}

resources/profiles/Printcepts/process/0.20mm Standard @BabyBelt Pro.json

@@ -1,23 +0,0 @@
-{
-	"type": "process",
-	"name": "0.20mm Standard @BabyBelt Pro",
-	"inherits": "fdm_process_common",
-	"from": "system",
-	"setting_id": "JGfGtqX6CWjCt437",
-	"instantiation": "true",
-	"layer_height": "0.2",
-	"initial_layer_print_height": "0.2",
-	"initial_layer_line_width": "0.42",
-	"wall_loops": "2",
-	"reduce_infill_retraction": "1",
-	"detect_overhang_wall": "1",
-	"skirt_loops": "0",
-	"skirt_distance": "0",
-	"sparse_infill_pattern": "grid",
-	"sparse_infill_speed": "200",
-	"support_base_pattern": "rectilinear",
-	"support_interface_pattern": "rectilinear",
-	"compatible_printers": [
-		"BabyBelt Pro 0.4 nozzle"
-	]
-}

resources/profiles/Printcepts/process/fdm_process_common.json

@@ -1,106 +0,0 @@
-{
-	"type": "process",
-	"name": "fdm_process_common",
-	"from": "system",
-	"instantiation": "false",
-	"reduce_crossing_wall": "0",
-	"max_travel_detour_distance": "0",
-	"bottom_surface_pattern": "monotonic",
-	"bottom_shell_thickness": "0",
-	"bridge_speed": "50",
-	"brim_width": "5",
-	"brim_object_gap": "0.1",
-	"compatible_printers": [],
-	"compatible_printers_condition": "",
-	"print_sequence": "by layer",
-	"default_acceleration": "1000",
-	"initial_layer_acceleration": "500",
-	"top_surface_acceleration": "1000",
-	"travel_acceleration": "1000",
-	"inner_wall_acceleration": "1000",
-	"outer_wall_acceleration": "700",
-	"bridge_no_support": "0",
-	"draft_shield": "disabled",
-	"elefant_foot_compensation": "0",
-	"enable_arc_fitting": "0",
-	"wall_infill_order": "inner wall/outer wall/infill",
-	"infill_direction": "45",
-	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "crosshatch",
-	"initial_layer_print_height": "0.2",
-	"infill_combination": "0",
-	"infill_wall_overlap": "25%",
-	"interface_shells": "0",
-	"ironing_flow": "10%",
-	"ironing_spacing": "0.15",
-	"ironing_speed": "30",
-	"ironing_type": "no ironing",
-	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[initial_tool]}_{printer_model}_{print_time}.gcode",
-	"detect_overhang_wall": "1",
-	"slowdown_for_curled_perimeters": "1",
-	"overhang_1_4_speed": "0",
-	"overhang_2_4_speed": "50",
-	"overhang_3_4_speed": "30",
-	"overhang_4_4_speed": "10",
-	"line_width": "110%",
-	"inner_wall_line_width": "110%",
-	"outer_wall_line_width": "100%",
-	"top_surface_line_width": "93.75%",
-	"sparse_infill_line_width": "110%",
-	"initial_layer_line_width": "120%",
-	"internal_solid_infill_line_width": "120%",
-	"support_line_width": "96%",
-	"wall_loops": "3",
-	"print_settings_id": "",
-	"raft_layers": "0",
-	"seam_position": "aligned",
-	"skirt_distance": "2",
-	"skirt_height": "3",
-	"min_skirt_length": "4",
-	"skirt_loops": "0",
-	"minimum_sparse_infill_area": "15",
-	"spiral_mode": "0",
-	"standby_temperature_delta": "-5",
-	"enable_support": "0",
-	"resolution": "0.012",
-	"support_type": "normal(auto)",
-	"support_on_build_plate_only": "0",
-	"support_top_z_distance": "0.2",
-	"support_bottom_z_distance": "0.2",
-	"support_filament": "0",
-	"support_interface_loop_pattern": "0",
-	"support_interface_filament": "0",
-	"support_interface_top_layers": "2",
-	"support_interface_bottom_layers": "2",
-	"support_interface_spacing": "0.5",
-	"support_interface_speed": "80",
-	"support_base_pattern": "default",
-	"support_base_pattern_spacing": "2.5",
-	"support_speed": "150",
-	"support_threshold_angle": "30",
-	"support_object_xy_distance": "0.35",
-	"tree_support_branch_angle": "30",
-	"tree_support_wall_count": "0",
-	"detect_thin_wall": "0",
-	"top_surface_pattern": "monotonicline",
-	"top_shell_thickness": "0.8",
-	"enable_prime_tower": "1",
-	"wipe_tower_no_sparse_layers": "0",
-	"prime_tower_width": "60",
-	"xy_hole_compensation": "0",
-	"xy_contour_compensation": "0",
-	"layer_height": "0.2",
-	"bottom_shell_layers": "3",
-	"top_shell_layers": "4",
-	"bridge_flow": "1",
-	"initial_layer_speed": "45",
-	"initial_layer_infill_speed": "45",
-	"outer_wall_speed": "45",
-	"inner_wall_speed": "80",
-	"sparse_infill_speed": "150",
-	"internal_solid_infill_speed": "150",
-	"top_surface_speed": "50",
-	"gap_infill_speed": "30",
-	"travel_speed": "200"
-}

resources/profiles/Prusa.json

@@ -1,6 +1,6 @@
 {
 	"name": "Prusa",
-	"version": "02.04.00.16",
+	"version": "02.04.00.15",
 	"force_update": "0",
 	"description": "Prusa configurations",
 	"machine_model_list": [
@@ -1573,32 +1573,48 @@
 	],
 	"filament_list": [
 		{
-			"name": "Generic PC @Prusa",
-			"sub_path": "filament/Generic PC @Prusa.json"
+			"name": "Generic ASA @Prusa CORE One",
+			"sub_path": "filament/Generic ASA @Prusa CORE One.json"
+		},
+		{
+			"name": "Generic PLA Silk @Prusa CORE One",
+			"sub_path": "filament/Generic PLA Silk @Prusa CORE One.json"
 		},
 		{
 			"name": "fdm_filament_common",
 			"sub_path": "filament/fdm_filament_common.json"
 		},
 		{
-			"name": "fdm_filament_template_indx",
-			"sub_path": "filament/fdm_filament_template_indx.json"
+			"name": "Generic ASA @Prusa CORE One 0.6",
+			"sub_path": "filament/Generic ASA @Prusa CORE One 0.6.json"
 		},
 		{
-			"name": "fdm_filament_template_nextruder_pet",
-			"sub_path": "filament/fdm_filament_template_nextruder_pet.json"
+			"name": "Generic ASA @Prusa CORE One 0.8",
+			"sub_path": "filament/Generic ASA @Prusa CORE One 0.8.json"
 		},
 		{
-			"name": "fdm_filament_template_nextruder_pet_hf",
-			"sub_path": "filament/fdm_filament_template_nextruder_pet_hf.json"
+			"name": "Generic ASA @Prusa CORE One HF 0.4",
+			"sub_path": "filament/Generic ASA @Prusa CORE One HF 0.4.json"
 		},
 		{
-			"name": "fdm_filament_template_nextruder_pla",
-			"sub_path": "filament/fdm_filament_template_nextruder_pla.json"
+			"name": "Generic ASA @Prusa CORE One HF 0.5",
+			"sub_path": "filament/Generic ASA @Prusa CORE One HF 0.5.json"
 		},
 		{
-			"name": "fdm_filament_template_nextruder_pla_hf",
-			"sub_path": "filament/fdm_filament_template_nextruder_pla_hf.json"
+			"name": "Generic ASA @Prusa CORE One HF 0.6",
+			"sub_path": "filament/Generic ASA @Prusa CORE One HF 0.6.json"
+		},
+		{
+			"name": "Generic ASA @Prusa CORE One HF 0.8",
+			"sub_path": "filament/Generic ASA @Prusa CORE One HF 0.8.json"
+		},
+		{
+			"name": "Generic PLA Silk @Prusa CORE One 0.6",
+			"sub_path": "filament/Generic PLA Silk @Prusa CORE One 0.6.json"
+		},
+		{
+			"name": "Generic PLA Silk @Prusa CORE One 0.8",
+			"sub_path": "filament/Generic PLA Silk @Prusa CORE One 0.8.json"
 		},
 		{
 			"name": "fdm_filament_abs",
@@ -1648,22 +1664,6 @@
 			"name": "fdm_filament_tpu",
 			"sub_path": "filament/fdm_filament_tpu.json"
 		},
-		{
-			"name": "Generic PLA Silk @Prusa CORE One INDX",
-			"sub_path": "filament/Generic PLA Silk @Prusa CORE One INDX.json"
-		},
-		{
-			"name": "Generic ASA @Prusa CORE One",
-			"sub_path": "filament/Generic ASA @Prusa CORE One.json"
-		},
-		{
-			"name": "Generic PC @Prusa MK4 MMU3",
-			"sub_path": "filament/Generic PC @Prusa MK4 MMU3.json"
-		},
-		{
-			"name": "Generic PLA Silk @Prusa CORE One",
-			"sub_path": "filament/Generic PLA Silk @Prusa CORE One.json"
-		},
 		{
 			"name": "Generic ABS @Prusa MK3.5",
 			"sub_path": "filament/Generic ABS @Prusa MK3.5.json"
@@ -2160,38 +2160,6 @@
 			"name": "Generic TPU HF @Prusa MK3.5",
 			"sub_path": "filament/Generic TPU HF @Prusa MK3.5.json"
 		},
-		{
-			"name": "Generic ASA @Prusa CORE One 0.6",
-			"sub_path": "filament/Generic ASA @Prusa CORE One 0.6.json"
-		},
-		{
-			"name": "Generic ASA @Prusa CORE One 0.8",
-			"sub_path": "filament/Generic ASA @Prusa CORE One 0.8.json"
-		},
-		{
-			"name": "Generic ASA @Prusa CORE One HF 0.4",
-			"sub_path": "filament/Generic ASA @Prusa CORE One HF 0.4.json"
-		},
-		{
-			"name": "Generic ASA @Prusa CORE One HF 0.5",
-			"sub_path": "filament/Generic ASA @Prusa CORE One HF 0.5.json"
-		},
-		{
-			"name": "Generic ASA @Prusa CORE One HF 0.6",
-			"sub_path": "filament/Generic ASA @Prusa CORE One HF 0.6.json"
-		},
-		{
-			"name": "Generic ASA @Prusa CORE One HF 0.8",
-			"sub_path": "filament/Generic ASA @Prusa CORE One HF 0.8.json"
-		},
-		{
-			"name": "Generic PLA Silk @Prusa CORE One 0.6",
-			"sub_path": "filament/Generic PLA Silk @Prusa CORE One 0.6.json"
-		},
-		{
-			"name": "Generic PLA Silk @Prusa CORE One 0.8",
-			"sub_path": "filament/Generic PLA Silk @Prusa CORE One 0.8.json"
-		},
 		{
 			"name": "Generic ABS @Prusa MK4S HF0.4",
 			"sub_path": "filament/Generic ABS @Prusa MK4S HF0.4.json"
@@ -2244,10 +2212,6 @@
 			"name": "Generic ABS HF @Prusa MINIIS 0.8",
 			"sub_path": "filament/Generic ABS HF @Prusa MINIIS 0.8.json"
 		},
-		{
-			"name": "Generic ASA @Prusa MK4 MMU3",
-			"sub_path": "filament/Generic ASA @Prusa MK4 MMU3.json"
-		},
 		{
 			"name": "Generic ASA @Prusa MK4S 0.6",
 			"sub_path": "filament/Generic ASA @Prusa MK4S 0.6.json"
@@ -2296,10 +2260,6 @@
 			"name": "Prusament ASA @CORE One HF 0.8",
 			"sub_path": "filament/Prusament ASA @CORE One HF 0.8.json"
 		},
-		{
-			"name": "Prusament ASA @MK4 MMU3",
-			"sub_path": "filament/Prusament ASA @MK4 MMU3.json"
-		},
 		{
 			"name": "Prusament ASA @MK4S 0.6",
 			"sub_path": "filament/Prusament ASA @MK4S 0.6.json"
@@ -2432,10 +2392,6 @@
 			"name": "Prusament PC Blend @CORE One HF 0.8",
 			"sub_path": "filament/Prusament PC Blend @CORE One HF 0.8.json"
 		},
-		{
-			"name": "Prusament PC Blend @MK4 MMU3",
-			"sub_path": "filament/Prusament PC Blend @MK4 MMU3.json"
-		},
 		{
 			"name": "Prusament PC Blend @MK4S 0.6",
 			"sub_path": "filament/Prusament PC Blend @MK4S 0.6.json"
@@ -2576,10 +2532,6 @@
 			"name": "Prusament PETG @CORE One HF 0.8",
 			"sub_path": "filament/Prusament PETG @CORE One HF 0.8.json"
 		},
-		{
-			"name": "Prusament PETG @MK4 MMU3",
-			"sub_path": "filament/Prusament PETG @MK4 MMU3.json"
-		},
 		{
 			"name": "Prusament PETG @MK4S 0.6",
 			"sub_path": "filament/Prusament PETG @MK4S 0.6.json"
@@ -2716,10 +2668,6 @@
 			"name": "Prusament PLA @CORE One HF 0.8",
 			"sub_path": "filament/Prusament PLA @CORE One HF 0.8.json"
 		},
-		{
-			"name": "Prusament PLA @MK4 MMU3",
-			"sub_path": "filament/Prusament PLA @MK4 MMU3.json"
-		},
 		{
 			"name": "Prusament PLA @MK4S 0.6",
 			"sub_path": "filament/Prusament PLA @MK4S 0.6.json"
@@ -2756,10 +2704,6 @@
 			"name": "Prusament rPLA @CORE One 0.8",
 			"sub_path": "filament/Prusament rPLA @CORE One 0.8.json"
 		},
-		{
-			"name": "Prusament rPLA @MK4 MMU3",
-			"sub_path": "filament/Prusament rPLA @MK4 MMU3.json"
-		},
 		{
 			"name": "Prusament rPLA @MK4S 0.6",
 			"sub_path": "filament/Prusament rPLA @MK4S 0.6.json"
@@ -2912,10 +2856,6 @@
 			"name": "Generic ABS @Prusa CORE One HF 0.8",
 			"sub_path": "filament/Generic ABS @Prusa CORE One HF 0.8.json"
 		},
-		{
-			"name": "Generic ABS @Prusa MK4 MMU3",
-			"sub_path": "filament/Generic ABS @Prusa MK4 MMU3.json"
-		},
 		{
 			"name": "Generic ASA @Prusa MK4S HF0.5",
 			"sub_path": "filament/Generic ASA @Prusa MK4S HF0.5.json"
@@ -2964,10 +2904,6 @@
 			"name": "Generic PETG @Prusa CORE One HF 0.8",
 			"sub_path": "filament/Generic PETG @Prusa CORE One HF 0.8.json"
 		},
-		{
-			"name": "Generic PETG @Prusa MK4 MMU3",
-			"sub_path": "filament/Generic PETG @Prusa MK4 MMU3.json"
-		},
 		{
 			"name": "Generic PLA @Prusa MK4S HF0.5",
 			"sub_path": "filament/Generic PLA @Prusa MK4S HF0.5.json"
@@ -3012,10 +2948,6 @@
 			"name": "Generic PLA @Prusa CORE One HF 0.8",
 			"sub_path": "filament/Generic PLA @Prusa CORE One HF 0.8.json"
 		},
-		{
-			"name": "Generic PLA @Prusa MK4 MMU3",
-			"sub_path": "filament/Generic PLA @Prusa MK4 MMU3.json"
-		},
 		{
 			"name": "Generic TPU @Prusa CORE One 0.6",
 			"sub_path": "filament/Generic TPU @Prusa CORE One 0.6.json"
@@ -3023,6 +2955,14 @@
 		{
 			"name": "Generic TPU @Prusa CORE One 0.8",
 			"sub_path": "filament/Generic TPU @Prusa CORE One 0.8.json"
+		},
+		{
+			"name": "Generic PC @Prusa",
+			"sub_path": "filament/Generic PC @Prusa.json"
+		},
+		{
+			"name": "Generic PLA Silk @Prusa CORE One INDX",
+			"sub_path": "filament/Generic PLA Silk @Prusa CORE One INDX.json"
 		}
 	],
 	"machine_list": [

resources/profiles/Prusa/filament/Generic ABS @Prusa CORE One HF 0.4.json

@@ -7,9 +7,6 @@
 	"setting_id": "ASYz8yASE82tQDII",
 	"filament_id": "OFY9muEs",
 	"instantiation": "true",
-	"include": [
-		"fdm_filament_template_nextruder_pet_hf"
-	],
 	"compatible_printers": [
 		"Prusa CORE One HF 0.4 nozzle"
 	],

resources/profiles/Prusa/filament/Generic ABS @Prusa CORE One HF 0.5.json

@@ -7,9 +7,6 @@
 	"setting_id": "mzZCm8XDmAR23YR6",
 	"filament_id": "OFY9muEs",
 	"instantiation": "true",
-	"include": [
-		"fdm_filament_template_nextruder_pet_hf"
-	],
 	"compatible_printers": [
 		"Prusa CORE One HF 0.5 nozzle"
 	],

resources/profiles/Prusa/filament/Generic ABS @Prusa CORE One HF 0.6.json

@@ -7,9 +7,6 @@
 	"setting_id": "gJhX2KBpk4wfXIj0",
 	"filament_id": "OFY9muEs",
 	"instantiation": "true",
-	"include": [
-		"fdm_filament_template_nextruder_pet_hf"
-	],
 	"compatible_printers": [
 		"Prusa CORE One HF 0.6 nozzle"
 	],

resources/profiles/Prusa/filament/Generic ABS @Prusa CORE One INDX.json

@@ -5,9 +5,6 @@
 	"from": "system",
 	"setting_id": "JEatvybG9xIkrPk3",
 	"instantiation": "true",
-	"include": [
-		"fdm_filament_template_indx"
-	],
 	"filament_cost": [
 		"34.65"
 	],

resources/profiles/Prusa/filament/Generic ABS @Prusa CORE One.json

@@ -6,9 +6,6 @@
 	"from": "system",
 	"setting_id": "0k31oXq1pLQsHvrj",
 	"instantiation": "true",
-	"include": [
-		"fdm_filament_template_nextruder_pet"
-	],
 	"chamber_temperature": [
 		"40"
 	],

resources/profiles/Prusa/filament/Generic ABS @Prusa MK4 MMU3.json

@@ -1,19 +0,0 @@
-{
-	"type": "filament",
-	"name": "Generic ABS @Prusa MK4 MMU3",
-	"inherits": "Generic ABS @Prusa MK4",
-	"from": "system",
-	"setting_id": "uFmixo2FX1yxNsDB",
-	"instantiation": "true",
-	"include": [
-		"fdm_filament_template_nextruder_pet"
-	],
-	"compatible_printers": [
-		"Prusa MK4 MMU3 0.4 nozzle",
-		"Prusa MK4 MMU3 0.6 nozzle",
-		"Prusa MK4 MMU3 HF0.4 nozzle"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"35"
-	]
-}

resources/profiles/Prusa/filament/Generic ASA @Prusa CORE One HF 0.4.json

@@ -7,9 +7,6 @@
 	"setting_id": "eKDfiVRE59itoppm",
 	"filament_id": "OFLPAxz3",
 	"instantiation": "true",
-	"include": [
-		"fdm_filament_template_nextruder_pet_hf"
-	],
 	"compatible_printers": [
 		"Prusa CORE One HF 0.4 nozzle"
 	],

resources/profiles/Prusa/filament/Generic ASA @Prusa CORE One HF 0.5.json

@@ -7,9 +7,6 @@
 	"setting_id": "ZjHf5Vvtf4ESNnWb",
 	"filament_id": "OFLPAxz3",
 	"instantiation": "true",
-	"include": [
-		"fdm_filament_template_nextruder_pet_hf"
-	],
 	"compatible_printers": [
 		"Prusa CORE One HF 0.5 nozzle"
 	],

resources/profiles/Prusa/filament/Generic ASA @Prusa CORE One HF 0.6.json

@@ -7,9 +7,6 @@
 	"setting_id": "aRDgUgQJWdNDJx5c",
 	"filament_id": "OFLPAxz3",
 	"instantiation": "true",
-	"include": [
-		"fdm_filament_template_nextruder_pet_hf"
-	],
 	"compatible_printers": [
 		"Prusa CORE One HF 0.6 nozzle"
 	],

resources/profiles/Prusa/filament/Generic ASA @Prusa CORE One.json

@@ -6,9 +6,6 @@
 	"from": "system",
 	"setting_id": "Q7fgojkHRZI0floy",
 	"instantiation": "true",
-	"include": [
-		"fdm_filament_template_nextruder_pet"
-	],
 	"chamber_temperature": [
 		"40"
 	],

resources/profiles/Prusa/filament/Generic ASA @Prusa MK4 MMU3.json

@@ -1,19 +0,0 @@
-{
-	"type": "filament",
-	"name": "Generic ASA @Prusa MK4 MMU3",
-	"inherits": "Generic ASA @Prusa MK4",
-	"from": "system",
-	"setting_id": "iq9bFkpmAOJ4ae4g",
-	"instantiation": "true",
-	"include": [
-		"fdm_filament_template_nextruder_pet"
-	],
-	"compatible_printers": [
-		"Prusa MK4 MMU3 0.4 nozzle",
-		"Prusa MK4 MMU3 0.6 nozzle",
-		"Prusa MK4 MMU3 HF0.4 nozzle"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"35"
-	]
-}

resources/profiles/Prusa/filament/Generic PC @Prusa MK4 MMU3.json

@@ -1,16 +0,0 @@
-{
-	"type": "filament",
-	"name": "Generic PC @Prusa MK4 MMU3",
-	"inherits": "Generic PC @Prusa",
-	"from": "system",
-	"setting_id": "qMawlK9QPI7DcF8I",
-	"instantiation": "true",
-	"include": [
-		"fdm_filament_template_nextruder_pet"
-	],
-	"compatible_printers": [
-		"Prusa MK4 MMU3 0.4 nozzle",
-		"Prusa MK4 MMU3 0.6 nozzle",
-		"Prusa MK4 MMU3 HF0.4 nozzle"
-	]
-}

resources/profiles/Prusa/filament/Generic PETG @Prusa CORE One HF 0.4.json

@@ -7,9 +7,6 @@
 	"setting_id": "7oUyjvRHLH4bJyX0",
 	"filament_id": "OFYPdQJh",
 	"instantiation": "true",
-	"include": [
-		"fdm_filament_template_nextruder_pet_hf"
-	],
 	"compatible_printers": [
 		"Prusa CORE One HF 0.4 nozzle"
 	],

resources/profiles/Prusa/filament/Generic PETG @Prusa CORE One HF 0.5.json

@@ -7,9 +7,6 @@
 	"setting_id": "6HiIOGURZWwman1l",
 	"filament_id": "OFYPdQJh",
 	"instantiation": "true",
-	"include": [
-		"fdm_filament_template_nextruder_pet_hf"
-	],
 	"compatible_printers": [
 		"Prusa CORE One HF 0.5 nozzle"
 	],

resources/profiles/Prusa/filament/Generic PETG @Prusa CORE One HF 0.6.json

@@ -7,9 +7,6 @@
 	"setting_id": "KKiug7A9NOQPe1m7",
 	"filament_id": "OFYPdQJh",
 	"instantiation": "true",
-	"include": [
-		"fdm_filament_template_nextruder_pet_hf"
-	],
 	"compatible_printers": [
 		"Prusa CORE One HF 0.6 nozzle"
 	],

resources/profiles/Prusa/filament/Generic PETG @Prusa CORE One INDX.json

@@ -5,9 +5,6 @@
 	"from": "system",
 	"setting_id": "HbevqxqvYHuvRc3v",
 	"instantiation": "true",
-	"include": [
-		"fdm_filament_template_indx"
-	],
 	"filament_cost": [
 		"27.82"
 	],